Commit 964d01ae9 marked a lot of fields as read_write_ignore
to stay consistent with what was dumped by the manually-maintained
outfuncs.c code. However, it seems that a pretty fair number
of those omissions were either flat-out oversights, or a shortcut
taken because hand-written code seemed like it'd be too much trouble.
Let's upgrade things where it seems to make sense to dump.
To do this, we need to add support to gen_node_support.pl and
outfuncs.c for variable-length arrays of Node pointers. That's
pretty straightforward given the model of the existing code
for arrays of scalars, but I found I needed to tighten the
type-recognizing regexes in gen_node_support.pl. (As they
stood, they mistook "foo **" for "foo *". Make sure they're
all fully anchored to prevent additional problems.)
The main thing left un-done here is that a lot of partitioning-related
structs are still not dumped, because they are bare structs not Nodes.
I'm not sure about the wisdom of that choice ... but changing it would
be fairly invasive, so it probably requires more justification than
just making planner node dumps more complete.
Discussion: https://postgr.es/m/1295668.1658258637@sss.pgh.pa.us
When the ability to print variable-length-array fields was first
added to outfuncs.c, there was no corresponding read capability,
as it was used only for debug dumps of planner-internal Nodes.
Not a lot of thought seems to have been put into the output format:
it's just the space-separated array elements and nothing else.
Later such fields appeared in Plan nodes, and still later we grew
read support so that Plans could be transferred to parallel workers,
but the original text format wasn't rethought. It seems inadequate
to me because (a) no cross-check is possible that we got the right
number of array entries, (b) we can't tell the difference between
a NULL pointer and a zero-length array, and (c) except for
WRITE_INDEX_ARRAY, we'd crash if a non-zero length is specified
when the pointer is NULL, a situation that can arise in some fields
that we currently conveniently avoid printing.
Since we're currently in a campaign to make the Node infrastructure
generally more it-just-works-without-thinking-about-it, now seems
like a good time to improve this.
Let's adopt a format similar to that used for Lists, that is "<>"
for a NULL pointer or "(item item item)" otherwise. Also retool
the code to not have so many copies of the identical logic.
I bumped catversion out of an abundance of caution, although I think
that we don't use any such array fields in Nodes that can get into
the catalogs.
Discussion: https://postgr.es/m/1528424.1658272135@sss.pgh.pa.us
The initial version of gen_node_support.pl manually excluded most
utility statement node types from having out/read support, and
also some raw-parse-tree-only node types. That was mostly to keep
the output comparable to the old hand-maintained code. We'd like
to have out/read support for utility statements, for debugging
purposes and so that they can be included in new-style SQL functions;
so it's time to lift that restriction.
Most if not all of the previously-excluded raw-parse-tree-only node
types can appear in expression subtrees of utility statements, so
they have to be handled too.
We don't quite have full read support yet; certain custom_read_write
node types need to have their handwritten read functions implemented
before that will work.
Doing this allows us to drop the previous hack in _outQuery to not
dump the utilityStmt field in most cases, which means we no longer
need manually-maintained out/read functions for Query, so get rid
of those in favor of auto-generating them.
Fix a couple of omissions in gen_node_support.pl that are exposed
through having to handle more node types.
catversion bump forced because somebody was sloppy about the field
order in the manually-maintained Query out/read functions.
(Committers should note that almost all changes in parsenodes.h
are now grounds for a catversion bump.)
Read/out support in 5ca0fe5c8ad7 was missing/incomplete, per Tom Lane.
Again, as far as core is concerned, this is not only dead code but also
untested; however, third parties may come to rely on it, so the standard
features should work.
Discussion: https://postgr.es/m/1548311.1657636605@sss.pgh.pa.us
copyfuncs.c and friends no longer seem like great places to put
high-level remarks about what's covered and what isn't. Move that
material to backend/nodes/README and other more-prominent places.
Add back (versions of) some remarks that disappeared in 2be87f092.
Discussion: https://postgr.es/m/3843645.1657385930@sss.pgh.pa.us
Add a script to automatically generate the node support functions
(copy, equal, out, and read, as well as the node tags enum) from the
struct definitions.
For each of the four node support files, it creates two include files,
e.g., copyfuncs.funcs.c and copyfuncs.switch.c, to include in the main
file. All the scaffolding of the main file stays in place.
I have tried to mostly make the coverage of the output match what is
currently there. For example, one could now do out/read coverage of
utility statement nodes, but I have manually excluded those for now.
The reason is mainly that it's easier to diff the before and after,
and adding a bunch of stuff like this might require a separate
analysis and review.
Subtyping (TidScan -> Scan) is supported.
For the hard cases, you can just write a manual function and exclude
generating one. For the not so hard cases, there is a way of
annotating struct fields to get special behaviors. For example,
pg_node_attr(equal_ignore) has the field ignored in equal functions.
(In this patch, I have only ifdef'ed out the code to could be removed,
mainly so that it won't constantly have merge conflicts. It will be
deleted in a separate patch. All the code comments that are worth
keeping from those sections have already been moved to the header
files where the structs are defined.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/c1097590-a6a4-486a-64b1-e1f9cc0533ce%40enterprisedb.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
Use it for RelationSyncEntry->streamed_txns, which is currently using an
integer list.
The API support is not complete, not because it is hard to write but
because it's unclear that it's worth the code space, there being so
little use of XID lists.
Discussion: https://postgr.es/m/202205130830.g5ntonhztspb@alvherre.pgsql
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
I started out with the intention to rename value_type to item_type to
avoid a collision with a typedef name that appears on some platforms.
Along the way, I noticed that the adjacent field "format" was not being
correctly handled by the backend/nodes/ infrastructure functions:
copyfuncs.c erroneously treated it as a scalar, while equalfuncs,
outfuncs, and readfuncs omitted handling it at all. This looks like
it might be cosmetic at the moment because the field is always NULL
after parse analysis; but that's likely a bug in itself, and the code's
certainly not very future-proof. Let's fix it while we can still do so
without forcing an initdb on beta testers.
Further study found a few other inconsistencies in the backend/nodes/
infrastructure for the recently-added JSON node types, so fix those too.
catversion bumped because of potential change in stored rules.
Discussion: https://postgr.es/m/526703.1652385613@sss.pgh.pa.us
Unlike existing WRITE_*_ARRAY macros, WRITE_INDEX_ARRAY needs to
handle the case that the field is NULL. We already have the
convention to print NULL fields as "<>", so we do that here as well.
There is currently no corresponding read function for this, so reading
this back in is not implemented, but it could be if needed.
Reported-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAMbWs4-LN%3DbF8f9eU2R94dJtF54DfDvBq%2BovqHnOQqbinYDrUw%40mail.gmail.com
Window functions such as row_number() always return a value higher than
the previously returned value for tuples in any given window partition.
Traditionally queries such as;
SELECT * FROM (
SELECT *, row_number() over (order by c) rn
FROM t
) t WHERE rn <= 10;
were executed fairly inefficiently. Neither the query planner nor the
executor knew that once rn made it to 11 that nothing further would match
the outer query's WHERE clause. It would blindly continue until all
tuples were exhausted from the subquery.
Here we implement means to make the above execute more efficiently.
This is done by way of adding a pg_proc.prosupport function to various of
the built-in window functions and adding supporting code to allow the
support function to inform the planner if the window function is
monotonically increasing, monotonically decreasing, both or neither. The
planner is then able to make use of that information and possibly allow
the executor to short-circuit execution by way of adding a "run condition"
to the WindowAgg to allow it to determine if some of its execution work
can be skipped.
This "run condition" is not like a normal filter. These run conditions
are only built using quals comparing values to monotonic window functions.
For monotonic increasing functions, quals making use of the btree
operators for <, <= and = can be used (assuming the window function column
is on the left). You can see here that once such a condition becomes false
that a monotonic increasing function could never make it subsequently true
again. For monotonically decreasing functions the >, >= and = btree
operators for the given type can be used for run conditions.
The best-case situation for this is when there is a single WindowAgg node
without a PARTITION BY clause. Here when the run condition becomes false
the WindowAgg node can simply return NULL. No more tuples will ever match
the run condition. It's a little more complex when there is a PARTITION
BY clause. In this case, we cannot return NULL as we must still process
other partitions. To speed this case up we pull tuples from the outer
plan to check if they're from the same partition and simply discard them
if they are. When we find a tuple belonging to another partition we start
processing as normal again until the run condition becomes false or we run
out of tuples to process.
When there are multiple WindowAgg nodes to evaluate then this complicates
the situation. For intermediate WindowAggs we must ensure we always
return all tuples to the calling node. Any filtering done could lead to
incorrect results in WindowAgg nodes above. For all intermediate nodes,
we can still save some work when the run condition becomes false. We've
no need to evaluate the WindowFuncs anymore. Other WindowAgg nodes cannot
reference the value of these and these tuples will not appear in the final
result anyway. The savings here are small in comparison to what can be
saved in the top-level WingowAgg, but still worthwhile.
Intermediate WindowAgg nodes never filter out tuples, but here we change
WindowAgg so that the top-level WindowAgg filters out tuples that don't
match the intermediate WindowAgg node's run condition. Such filters
appear in the "Filter" clause in EXPLAIN for the top-level WindowAgg node.
Here we add prosupport functions to allow the above to work for;
row_number(), rank(), dense_rank(), count(*) and count(expr). It appears
technically possible to do the same for min() and max(), however, it seems
unlikely to be useful enough, so that's not done here.
Bump catversion
Author: David Rowley
Reviewed-by: Andy Fan, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqvp3At8++yF8ij06sdcoo1S_b2YoaT9D4Nf+MObzsrLQ@mail.gmail.com
In commit 27e1f1456, create_append_plan() only allowed the subplan
created from a given subpath to be executed asynchronously when it was
an async-capable ForeignPath. To extend coverage, this patch handles
cases when the given subpath includes some other Path types as well that
can be omitted in the plan processing, such as a ProjectionPath directly
atop an async-capable ForeignPath, allowing asynchronous execution in
partitioned-scan/partitioned-join queries with non-Var tlist expressions
and more UNION queries.
Andrey Lepikhov and Etsuro Fujita, reviewed by Alexander Pyhalov and
Zhihong Yu.
Discussion: https://postgr.es/m/659c37a8-3e71-0ff2-394c-f04428c76f08%40postgrespro.ru
These clauses allow the user to specify how data from nested paths are
joined, allowing considerable freedom in shaping the tabular output of
JSON_TABLE.
PLAN DEFAULT allows the user to specify the global strategies when
dealing with sibling or child nested paths. The is often sufficient to
achieve the necessary goal, and is considerably simpler than the full
PLAN clause, which allows the user to specify the strategy to be used
for each named nested path.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
This feature allows jsonb data to be treated as a table and thus used in
a FROM clause like other tabular data. Data can be selected from the
jsonb using jsonpath expressions, and hoisted out of nested structures
in the jsonb to form multiple rows, more or less like an outer join.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu (whose
name I previously misspelled), Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
This introduces the SQL/JSON functions for querying JSON data using
jsonpath expressions. The functions are:
JSON_EXISTS()
JSON_QUERY()
JSON_VALUE()
All of these functions only operate on jsonb. The workaround for now is
to cast the argument to jsonb.
JSON_EXISTS() tests if the jsonpath expression applied to the jsonb
value yields any values. JSON_VALUE() must return a single value, and an
error occurs if it tries to return multiple values. JSON_QUERY() must
return a json object or array, and there are various WRAPPER options for
handling scalar or multi-value results. Both these functions have
options for handling EMPTY and ERROR conditions.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This patch intrdocuces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON as well as on the json and
jsonb types. Each test has an IS and IS NOT variant. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
IS JSON WITH | WITHOUT UNIQUE KEYS
These are mostly self-explanatory, but note that IS JSON WITHOUT UNIQUE
KEYS is true whenever IS JSON is true, and IS JSON WITH UNIQUE KEYS is
true whenever IS JSON is true except it IS JSON OBJECT is true and there
are duplicate keys (which is never the case when applied to jsonb values).
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
This patch introduces the SQL/JSON standard constructors for JSON:
JSON()
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
For the most part these functions provide facilities that mimic
existing json/jsonb functions. However, they also offer some useful
additional functionality. In addition to text input, the JSON() function
accepts bytea input, which it will decode and constuct a json value from.
The other functions provide useful options for handling duplicate keys
and null values.
This series of patches will be followed by a consolidated documentation
patch.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This introduces some of the building blocks used by the SQL/JSON
constructor and query functions. Specifically, it provides node
executor and grammar support for the FORMAT JSON [ENCODING foo]
clause, and values decorated with it, and for the RETURNING clause.
The following SQL/JSON patches will leverage these.
Nikita Glukhov (who probably deserves an award for perseverance).
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This introduces some of the building blocks used by the SQL/JSON
constructor and query functions. Specifically, it provides node
executor and grammar support for the FORMAT JSON [ENCODING foo]
clause, and values decorated with it, and for the RETURNING clause.
The following SQL/JSON patches will leverage these.
Nikita Glukhov (who probably deserves an award for perseverance).
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup. Erik Rijkers, Zihong Yu and
Himanshu Upadhyaya.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
Before, SQL-level boolean constants were represented by a string with
a cast, and internal Boolean values in DDL commands were usually
represented by Integer nodes. This takes the place of both of these
uses, making the intent clearer and having some amount of type safety.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
Commit 4ace45677 failed to fix the problem fully, because the
same issue of attempting to fetch a non-returnable index column
can occur when rechecking the indexqual after using a lossy index
operator. Moreover, it broke EXPLAIN for such indexquals (which
indicates a gap in our test cases :-().
Revert the code changes of 4ace45677 in favor of adding a new field
to struct IndexOnlyScan, containing a version of the indexqual that
can be executed against the index-returned tuple without using any
non-returnable columns. (The restrictions imposed by check_index_only
guarantee this is possible, although we may have to recompute indexed
expressions.) Support construction of that during setrefs.c
processing by marking IndexOnlyScan.indextlist entries as resjunk
if they can't be returned, rather than removing them entirely.
(We could alternatively require setrefs.c to look up the IndexOptInfo
again, but abusing resjunk this way seems like a reasonably safe way
to avoid needing to do that.)
This solution isn't great from an API-stability standpoint: if there
are any extensions out there that build IndexOnlyScan structs directly,
they'll be broken in the next minor releases. However, only a very
invasive extension would be likely to do such a thing. There's no
change in the Path representation, so typical planner extensions
shouldn't have a problem.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
Extend the foreign key ON DELETE actions SET NULL and SET DEFAULT by
allowing the specification of a column list, like
CREATE TABLE posts (
...
FOREIGN KEY (tenant_id, author_id) REFERENCES users ON DELETE SET NULL (author_id)
);
If a column list is specified, only those columns are set to
null/default, instead of all the columns in the foreign-key
constraint.
This is useful for multitenant or sharded schemas, where the tenant or
shard ID is included in the primary key of all tables but shouldn't be
set to null.
Author: Paul Martinez <paulmtz@google.com>
Discussion: https://www.postgresql.org/message-id/flat/CACqFVBZQyMYJV=njbSMxf+rbDHpx=W=B7AEaMKn8dWn9OZJY7w@mail.gmail.com
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
In v14, because we don't have a field in RestrictInfo to cache both the
left and right type's hash equality operator, we just restrict the scope
of Memoize to only when the left and right types of a RestrictInfo are the
same.
In master we add another field to RestrictInfo and cache both hash
equality operators.
Reported-by: Jaime Casanova
Author: David Rowley
Discussion: https://postgr.es/m/20210929185544.GB24346%40ahch-to
Backpatch-through: 14
Up to now the size of a query's rangetable has been limited by the
constants INNER_VAR et al, which mustn't be equal to any real
rangetable index. 65000 doubtless seemed like enough for anybody,
and it still is orders of magnitude larger than the number of joins
we can realistically handle. However, we need a rangetable entry
for each child partition that is (or might be) processed by a query.
Queries with a few thousand partitions are getting more realistic,
so that the day when that limit becomes a problem is in sight,
even if it's not here yet. Hence, let's raise the limit.
Rather than just increase the values of INNER_VAR et al, this patch
adopts the approach of making them small negative values, so that
rangetables could theoretically become as long as INT_MAX.
The bulk of the patch is concerned with changing Var.varno and some
related variables from "Index" (unsigned int) to plain "int". This
is basically cosmetic, with little actual effect other than to help
debuggers print their values nicely. As such, I've only bothered
with changing places that could actually see INNER_VAR et al, which
the parser and most of the planner don't. We do have to be careful
in places that are performing less/greater comparisons on varnos,
but there are very few such places, other than the IS_SPECIAL_VARNO
macro itself.
A notable side effect of this patch is that while it used to be
possible to add INNER_VAR et al to a Bitmapset, that will now
draw an error. I don't see any likelihood that it wouldn't be a
bug to include these fake varnos in a bitmapset of real varnos,
so I think this is all to the good.
Although this touches outfuncs/readfuncs, I don't think a catversion
bump is required, since stored rules would never contain Vars
with these fake varnos.
Andrey Lepikhov and Tom Lane, after a suggestion by Peter Eisentraut
Discussion: https://postgr.es/m/43c7f2f5-1e27-27aa-8c65-c91859d15190@postgrespro.ru
In most cases, the prefix string in a node output is the upper case of
the node structure name, e.g., MergeAppend -> MERGEAPPEND. There were
a few exceptions that for either no apparent reason or perhaps minor
aesthetic reasons deviated from this. In order to simplify this and
perhaps allow automatic generation without having to deal with
exception cases, make them all match.
Discussion: https://www.postgresql.org/message-id/c091e5cd-45f8-69ee-6a9b-de86912cc7e7@enterprisedb.com
We have a few WRITE_{name of type}_ARRAY macros, but the one case
using the Index type was hand-coded. Wrap it into a macro as well.
This also changes the behavior slightly: Before, the field name was
skipped if the length was zero. Now it prints the field name even in
that case. This is more consistent with how other array fields are
handled.
Reviewed-by: Jacob Champion <pchampion@vmware.com>
Discussion: https://www.postgresql.org/message-id/c091e5cd-45f8-69ee-6a9b-de86912cc7e7@enterprisedb.com
The Value node struct is a weird construct. It is its own node type,
but most of the time, it actually has a node type of Integer, Float,
String, or BitString. As a consequence, the struct name and the node
type don't match most of the time, and so it has to be treated
specially a lot. There doesn't seem to be any value in the special
construct. There is very little code that wants to accept all Value
variants but nothing else (and even if it did, this doesn't provide
any convenient way to check it), and most code wants either just one
particular node type (usually String), or it accepts a broader set of
node types besides just Value.
This change removes the Value struct and node type and replaces them
by separate Integer, Float, String, and BitString node types that are
proper node types and structs of their own and behave mostly like
normal node types.
Also, this removes the T_Null node tag, which was previously also a
possible variant of Value but wasn't actually used outside of the
Value contained in A_Const. Replace that by an isnull field in
A_Const.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
For partitioned tables with large numbers of partitions where queries are
able to prune all but a very small number of partitions, the time spent in
the planner looping over RelOptInfo.part_rels checking for non-NULL
RelOptInfos could become a large portion of the overall planning time.
Here we add a Bitmapset that records the non-pruned partitions. This
allows us to more efficiently skip the pruned partitions by looping over
the Bitmapset.
This will cause a very slight slow down in cases where no or not many
partitions could be pruned, however, those cases are already slow to plan
anyway and the overhead of looping over the Bitmapset would be
unmeasurable when compared with the other tasks such as path creation for
a large number of partitions.
Reviewed-by: Amit Langote, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqnPx6JnUuPwaf5ao38zczrAb9mxt9gj4U1EKFfd4AqLA@mail.gmail.com
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
Similar to 50e17ad28, which allowed hash tables to be used for IN clauses
with a set of constants, here we add the same feature for NOT IN clauses.
NOT IN evaluates the same as: WHERE a <> v1 AND a <> v2 AND a <> v3.
Obviously, if we're using a hash table we must be exactly equivalent to
that and return the same result taking into account that either side of
the condition could contain a NULL. This requires a little bit of
special handling to make work with the hash table version.
When processing NOT IN, the ScalarArrayOpExpr's operator will be the <>
operator. To be able to build and lookup a hash table we must use the
<>'s negator operator. The planner checks if that exists and is hashable
and sets the relevant fields in ScalarArrayOpExpr to instruct the executor
to use hashing.
Author: David Rowley, James Coleman
Reviewed-by: James Coleman, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvoF1mum_FRk6D621edcB6KSHBi2+GAgWmioj5AhOu2vwQ@mail.gmail.com
Commit a4d75c86bf added a new flag, tracking if the statement was
processed by transformStatsStmt(), but failed to add this flag to
nodes/*funcs.c.
Catversion bump, due to adding a flag to copy/equal/out functions.
Reported-by: Noah Misch
Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
