Remove PageIsValid() and PageSizeIsValid(), which weren't used and
seem unnecessary.
Some code using these formerly-macros needs some adjustments because
it was previously playing loose with the Page vs. PageHeader types,
which is no longer possible with the functions instead of macros.
Reviewed-by: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5b558da8-99fb-0a99-83dd-f72f05388517%40enterprisedb.com
dshash.c previously maintained flags to be able to assert that you
didn't hold any partition lock. These flags could get out of sync with
reality in error scenarios.
Get rid of all that, and make assertions about the locks themselves
instead. Since LWLockHeldByMe() loops internally, we don't want to put
that inside another loop over all partition locks. Introduce a new
debugging-only interface LWLockAnyHeldByMe() to avoid that.
This problem was noted by Tom and Andres while reviewing changes to
support the new shared memory stats system, and later showed up in
reality while working on commit 389869af.
Back-patch to 11, where dshash.c arrived.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311012712.botrpsikaufzteyt@alap3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGJ31Wce6HJ7xnVTKWjFUWQZPBngxfJVx4q0E98pDr3kAw%40mail.gmail.com
This addresses two issues in the tests of test_oat_hooks:
- The role regress_test_user was being left behind, preventing the test
to succeed on repeated runs. It makes sense to leave some objects
behind to have more coverage for pg_upgrade (as does test_pg_dump), but
the role dropped here does not own any objects so there is no reason to
keep it.
- GRANT SET ON PARAMETER is issued, creating an entry in
pg_parameter_acl without cleaning up the entry created. This causes
an overlap with unsafe_tests as both use work_mem, making the latter
fail. This commit adds an extra REVOKE SET ON PARAMETER to clean the
contents of pg_parameter_acl, switching to maintenance_work_mem rather
than work_mem to avoid an overlap between both tests.
The tests of test_oat_hooks cannot use installcheck yet as these are
proving to be unstable with caching and the namespace search hooks, so
the issues fixed here cannot be reached yet, but they would be once the
hook issue is addressed and installcheck is allowed again in
test_oat_hooks.
Discussion: https://postgr.es/m/YrpVkADAY0knF6vM@paquier.xyz
Backpatch-through: 15
The original comments mentioned a "parameter" as something not defined
in a fast-exit path to assume a true status. This is rather confusing
as the parameter DefElem is defined, and the intention is to check if
its value is defined. This improves both comments to mention the value
assigned to the DefElem's value instead, so as future patches are able
to catch the tweak if this code pattern gets copied around more.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv0yWynWTmp4o34s0d98xVubys9fy=p0YXsZ5_sUcNnMw@mail.gmail.com
* Remove arbitrary mention of certain endianness and bitness variants;
it's enough to say that applicable variants are expected to work.
* List RISC-V (known to work, being tested).
* List SuperH and M88K (code exists, unknown status, like M68K).
* De-list VAX and remove code (known not to work).
* Remove stray trace of Alpha (support was removed years ago).
* List illumos, DragonFlyBSD (known to work, being tested).
* No need to single Windows out by listing a specific version, when we
don't do that for other OSes; it's enough to say that we support
current versions of the listed OSes (when 16 ships, that'll be
Windows 10+).
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Discussion: https://postgr.es/m/CA%2BhUKGKk7NZO1UnJM0PyixcZPpCGqjBXW_0bzFZpJBGAf84XKg%40mail.gmail.com
When you hit ^C, the terminal driver in Unix-like systems echoes "^C" as
well as sending an interrupt signal (depending on stty settings). At
least libedit (but maybe also libreadline) is then confused about the
current cursor location, and corrupts the display if you try to scroll
back. Fix, by moving to a new line before the next prompt is displayed.
Back-patch to all supported released.
Author: Pavel Stehule <pavel.stehule@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3278793.1626198638%40sss.pgh.pa.us
Fix incorrect reporting of the location of errors (such as bogus
node attributes). Add header comments to the generated files,
containing copyright notices and reminders that they are generated
files, as we do in other file-generating scripts. Arrange to not
leave a clutter of temporary files when the script detects an error.
Discussion: https://postgr.es/m/3843645.1657385930@sss.pgh.pa.us
copyfuncs.c and friends no longer seem like great places to put
high-level remarks about what's covered and what isn't. Move that
material to backend/nodes/README and other more-prominent places.
Add back (versions of) some remarks that disappeared in 2be87f092.
Discussion: https://postgr.es/m/3843645.1657385930@sss.pgh.pa.us
In the same vein as commit 251154beb, make it clear that we never
instantiate PlanState.
Also mark MemoryContextData as abstract. This has no effect right now,
since memnodes.h isn't one of the files fed to gen_node_support.pl.
But it seems like good documentation and future-proofing.
Add a script to automatically generate the node support functions
(copy, equal, out, and read, as well as the node tags enum) from the
struct definitions.
For each of the four node support files, it creates two include files,
e.g., copyfuncs.funcs.c and copyfuncs.switch.c, to include in the main
file. All the scaffolding of the main file stays in place.
I have tried to mostly make the coverage of the output match what is
currently there. For example, one could now do out/read coverage of
utility statement nodes, but I have manually excluded those for now.
The reason is mainly that it's easier to diff the before and after,
and adding a bunch of stuff like this might require a separate
analysis and review.
Subtyping (TidScan -> Scan) is supported.
For the hard cases, you can just write a manual function and exclude
generating one. For the not so hard cases, there is a way of
annotating struct fields to get special behaviors. For example,
pg_node_attr(equal_ignore) has the field ignored in equal functions.
(In this patch, I have only ifdef'ed out the code to could be removed,
mainly so that it won't constantly have merge conflicts. It will be
deleted in a separate patch. All the code comments that are worth
keeping from those sections have already been moved to the header
files where the structs are defined.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/c1097590-a6a4-486a-64b1-e1f9cc0533ce%40enterprisedb.com
PostgreSQL contains the implementation of the red-black tree. The red-black
tree is the ordered data structure, and one of its advantages is the ability
to do inequality searches. This commit adds rbt_find_less() and
rbt_find_great() functions implementing these searches. While these searches
aren't yet used in the core code, they might be useful for extensions.
Discussion: https://postgr.es/m/CAGRrpzYE8-7GCoaPjOiL9T_HY605MRax-2jgTtLq236uksZ1Sw%40mail.gmail.com
Author: Steve Chavez, Alexander Korotkov
Reviewed-by: Alexander Korotkov
Commit 9a974cbcba005256a19991203583a94b4f9a21a9 did this for user
tables, but pg_upgrade treats pg_largeobject as a user table, and so
needs the same treatment. Without this fix, if you rewrite the
pg_largeobject table and then perform an upgrade with pg_upgrade, the
table will apparently be empty on the new cluster, while all of your
objects will end up with an orphaned file.
With this fix, instead of the old cluster's pg_largeobject files ending
up orphaned, the original files fro the new cluster do. That's mostly
harmless because we expect the table to be empty, but we might want
to arrange to remove the as part of the upgrade. Since we're still
debating the best way of doing that, I (rhaas) have decided to postpone
dealing with that problem and get the basic fix committed.
Justin Pryzby, reviewed by Shruthi Gowda and by me.
Discussion: http://postgr.es/m/20220701231413.GI13040@telsasoft.com
This CPU architecture has been discontinued. We already removed HP-UX
support, we never supported Windows/Itanium, and the open source
operating systems that a vintage hardware owner might hope to run have
all either ended Itanium support or never fully released support (NetBSD
may eventually). The extra code we carry for this rare ISA is now
untested. It seems like a good time to remove it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/1415825.1656893299%40sss.pgh.pa.us
HP-UX hardware is no longer produced, build farm coverage recently
ended, and there are no known active maintainers targeting this OS.
Since there is a major rewrite of the build system in the pipeline for
PostgreSQL 16, and that requires development, testing and maintainance
for each OS and tool chain, it seems like a good time to drop support
for:
* HP-UX, the operating system.
* HP aCC, the HP-UX native compiler.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/1415825.1656893299%40sss.pgh.pa.us
These are documented to be the allowed types for the RETURNING clause,
but the restriction was not being enforced, which caused a segfault if
another type was specified. Add some testing for this.
Per report from a.kozhemyakin
Backpatch to release 15.
The general convention in the executor is to refer to child plans
and planstates via the outerPlan[State] and innerPlan[State]
macros, but a few places didn't do it like that. For consistency
and readability, convert all the stragglers to use the macros.
(See also commit 40f42d2a3, which did some similar cleanup a few
years ago, but missed these cases.)
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-vYhh1xsa_veah4PUed2Xq=Ed_YH3=Mqt5A3Y=EgfCEg@mail.gmail.com
It is useful for debugging purposes to report the checkpoint LSN and
REDO LSN in log_checkpoints message. It can give more context while
analyzing checkpoint-related issues. pg_controldata reports the last
checkpoint LSN and REDO LSN, but having this information alongside
the log message helps analyze issues that happened previously,
connect the dots and identify the root cause.
Author: Bharath Rupireddy, Kyotaro Horiguchi
Reviewed-by: Michael Paquier, Julien Rouhaud, Nathan Bossart, Fujii Masao, Greg Stark
Discussion: https://postgr.es/m/CALj2ACWt6kqriAHrO+AJj+OmP=suwbktHT5JoYAn-nqZe2gd2g@mail.gmail.com
When locking a specific named relation for a FOR [KEY] UPDATE/SHARE
clause, transformLockingClause() finds the relation to lock by
scanning the rangetable for an RTE with a matching eref->aliasname.
However, it failed to account for the visibility rules of a join RTE.
If a join RTE doesn't have a user-supplied alias, it will have a
generated eref->aliasname of "unnamed_join" that is not visible as a
relation name in the parse namespace. Such an RTE needs to be skipped,
otherwise it might be found in preference to a regular base relation
with a user-supplied alias of "unnamed_join", preventing it from being
locked.
In addition, if a join RTE doesn't have a user-supplied alias, but
does have a join_using_alias, then the RTE needs to be matched using
that alias rather than the generated eref->aliasname, otherwise a
misleading "relation not found" error will be reported rather than a
"join cannot be locked" error.
Backpatch all the way, except for the second part which only goes back
to 14, where JOIN USING aliases were added.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUY_KOBnqxbTSPf=7fz9HWPnZ5Xgb9SwYzZ8rFXe7nb=w@mail.gmail.com
This commit bumps the runtime value of _WIN32_WINNT to be 0x0A00 for any
builds on Windows. Hence, this makes Windows 10 the minimal requirement
when running PostgreSQL under WIN32, be it for builds of Cygwin, MinGW
or Visual Studio.
The previous minimal runtime version was either Windows Vista when
building with at least Visual Studio 2015 or Windows XP for the rest.
Windows 10 is the most modern version supported by Microsoft, and per
discussion, as we don't have buildfarm members that run older versions
anymore, this is the minimal supported version that suits better for our
needs. This will actually make easier the development of some patches,
two being async I/O and large page handling by avoiding a lot of
compatibility gotchas, on platforms that have most likely few users
anyway.
It is possible to remove MIN_WINNT in win32.h and the macros
IsWindowsXXXOrGreater() that were used in the code at runtime to check
which version of Windows was getting used. The change in pg_locale.c
comes from Juan. Note that all my tests passed, and that the CI is
green. The buildfarm will quickly tell if this needs more adjustments.
Author: Michael Paquier, Juan José Santamaría Flecha
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/Yo7tHKD8VCkeNi71@paquier.xyz
By convention, the tab-complete subscription parameters are listed in the
COMPLETE_WITH lists in alphabetical order, but when the "disable_on_error"
parameter was introduced this was not done.
This patch just tidies that up.
Reported-by: Peter Smith
Author: Peter Smith
Reviewed-by: Euler Taveira, Takamichi Osumi
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAHut+PucvKZgg_eJzUW--iL6DXHg1Jwj6F09tQziE3kUF67uLg@mail.gmail.com
That comment might have been true at some point during development, but
definitely isn't anymore.
Reported-By: Melanie Plageman <melanieplageman@gmail.com>
Backpatch: 15-
We hadn't noticed this because it's dead code: there is no
situation where we read raw parse trees from text format.
So maybe the right fix is to remove the function altogether,
but I'll forbear for now; it's not the only dead code in
readfuncs.c, I think.
Noted while comparing existing code to the results of
Peter's auto-generation script.
40af10b57 changed things so we make use of a generation memory context for
storing tuples to be sorted by tuplesort.c. That change does not play
nicely with the changes made in 9f03ca915 (back in 2014). That commit
changed things so that index_form_tuple() is called while switched into
the tuplestore's tuplecontext. In order to fetch the tuple from the index,
index_form_tuple() must do various memory allocations which are unrelated
to the storage of the final returned tuple. Although all of these
allocations are pfree'd, the fact that we now use a generation context
means that the memory for these pfree'd allocations won't be used again by
any other allocation due to generation.c's lack of freelists. This could
result in sorts used for building indexes exceeding maintenance_work_mem
by a very large amount.
Here we fix it so we no longer allocate anything apart from the tuple
itself into the generation context by adding a new version of
index_form_tuple named index_form_tuple_context, which can be called to
specify the MemoryContext to allocate the tuple into.
Discussion: https://postgr.es/m/CAApHDvrHQkiFRHiGiAS-LMOvJN-eK-s762=tVzBz8ZqUea-a_A@mail.gmail.com
Backpatch-through: 15, where 40af10b57 was added.
It's not very robust to assume that each inserted row will produce
exactly one WAL record and that no other WAL records will be generated
in the process, because for example a particular transaction could
always be the one that has to extend clog.
Because these tests are not run by 'make installcheck' but only by
'make check', it may be that in our current testing infrastructure
this can't be hit, but it doesn't seem like a good idea to rely on
that, since unrelated changes to the regression tests or the way
write-ahead logging is done could easily cause it to start happening,
and debugging such failures is a pain.
Adjust the regression test to be less sensitive.
Anton Melnikov, reviewed by Julien Rouhaud
Discussion: http://postgr.es/m/1ccd00d9-1723-6b68-ae56-655aab00d406@inbox.ru
There's no reason anymore to only drop subscription stats if associated with a
slot, now that stats drops are transactional. And since there's now no other
cleanup of stats, this would lead to stats for slot-less subscriptions to get
leaked (however most slot-less subs won't have stats).
Additionally, the comment referring to autovacuum cleaning up stats was
clearly outdated.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAwiby3HeJE7vJe16Gr75RFfJ640dyHqvsiUhyKJTXPtw@mail.gmail.com
Backpatch: 15-
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
