The original code used freeze_min_age instead of freeze_table_age. The
main consequence of this mistake is that lowering freeze_min_age would
cause full-table scans to occur much more frequently, which causes
serious issues because the number of writes required is much larger.
That feature (freeze_min_age) is supposed to affect only how soon tuples
are frozen; some pages should still be skipped due to the visibility
map.
Backpatch to 8.4, where the freeze_table_age feature was introduced.
Report and patch from Andres Freund
This ensure the version number increases over time. The first three digits
in the version number is still set to the actual PostgreSQL version
number, but the last one is intended to be an ever increasing build number,
which previosly failed when it changed between 1, 2 and 3 digits long values.
Noted by Deepak
Such cases should work, but the grammar failed to accept them because of
our ancient precedence hacks to convince bison that extra parentheses
around a sub-SELECT in an expression are unambiguous. (Formally, they
*are* ambiguous, but we don't especially care whether they're treated as
part of the sub-SELECT or part of the expression. Bison cares, though.)
Fix by adding a redundant-looking production for this case.
This is a fine example of why fixing shift/reduce conflicts via
precedence declarations is more dangerous than it looks: you can easily
cause the parser to reject cases that should work.
This has been wrong since commit 3db4056e22b0c6b2adc92543baf8408d2894fe91
or maybe before, and apparently some people have been working around it
by inserting no-op casts. That method introduces a dump/reload hazard,
as illustrated in bug #7838 from Jan Mate. Hence, back-patch to all
active branches.
My "fix" for bugs #7578 and #6116 on DROP OWNED at fe3b5eb08a1 not only
misstated that it applied to REASSIGN OWNED (which it did not affect),
but it also failed to fix the problems fully, because I didn't test the
case of owned shared objects. Thus I created a new bug, reported by
Thomas Kellerer as #7748, which would cause DROP OWNED to fail with a
not-for-user-consumption error message. The code would attempt to drop
the database, which not only fails to work because the underlying code
does not support that, but is a pretty dangerous and undesirable thing
to be doing as well.
This patch fixes that bug by having DROP OWNED only attempt to process
shared objects when grants on them are found, ignoring ownership.
Backpatch to 8.3, which is as far as the previous bug was backpatched.
plpython tried to use a single cache entry for a trigger function, but it
needs a separate cache entry for each table the trigger is applied to,
because there is table-dependent data in there. This was done correctly
before 9.1, but commit 46211da1b84bc3537e799ee1126098e71c2428e8 broke it
by simplifying the lookup key from "function OID and triggered table OID"
to "function OID and is-trigger boolean". Go back to using both OIDs
as the lookup key. Per bug report from Sandro Santilli.
Andres Freund
Since 9.0, the count parameter has only limited the number of tuples
actually returned by the executor. It doesn't affect the behavior of
INSERT/UPDATE/DELETE unless RETURNING is specified, because without
RETURNING, the ModifyTable plan node doesn't return control to execMain.c
for each tuple. And we only check the limit at the top level.
While this behavioral change was unintentional at the time, discussion of
bug #6572 led us to the conclusion that we prefer the new behavior anyway,
and so we should just adjust the docs to match rather than change the code.
Accordingly, do that. Back-patch as far as 9.0 so that the docs match the
code in each branch.
This ensures that mapping of non-ascii prompts
to the correct code page occurs.
Bug report and original patch from Alexander Law,
reviewed and reworked by Noah Misch.
Backpatch to all live branches.
The machinery around XLOG_HEAP2_CLEANUP_INFO failed
to correctly pass through the necessary information
on latestRemovedXid, avoiding cancellations in some
infrequent concurrent update/cleanup scenarios.
Backpatchable fix to 9.0
Detailed bug report and fix by Noah Misch,
backpatchable version by me.
In situations where there are over 8MB of empty pages at the end of
a table, the truncation work for trailing empty pages takes longer
than deadlock_timeout, and there is frequent access to the table by
processes other than autovacuum, there was a problem with the
autovacuum worker process being canceled by the deadlock checking
code. The truncation work done by autovacuum up that point was
lost, and the attempt tried again by a later autovacuum worker. The
attempts could continue indefinitely without making progress,
consuming resources and blocking other processes for up to
deadlock_timeout each time.
This patch has the autovacuum worker checking whether it is
blocking any other thread at 20ms intervals. If such a condition
develops, the autovacuum worker will persist the work it has done
so far, release its lock on the table, and sleep in 50ms intervals
for up to 5 seconds, hoping to be able to re-acquire the lock and
try again. If it is unable to get the lock in that time, it moves
on and a worker will try to continue later from the point this one
left off.
While this patch doesn't change the rules about when and what to
truncate, it does cause the truncation to occur sooner, with less
blocking, and with the consumption of fewer resources when there is
contention for the table's lock.
The only user-visible change other than improved performance is
that the table size during truncation may change incrementally
instead of just once.
Backpatched to 9.0 from initial master commit at
b19e4250b45e91c9cbdd18d35ea6391ab5961c8d -- before that the
differences are too large to be clearly safe.
Jan Wieck
This bug goes back to the original Postgres95 sources. Its significance
to modern PG versions is marginal, since we have not used PQprintTuples()
internally in a very long time, and it doesn't seem to have ever been
documented either. Still, it *is* exposed to client apps, so somebody
out there might possibly be using it.
Xi Wang
Un-double the backslashes in the LIKE patterns, since
standard_conforming_strings is now the default. Just to be sure, include
a command to set standard_conforming_strings to ON in the example.
Back-patch to 9.1, where standard_conforming_strings became the default.
Josh Kupershmidt, reviewed by Jeff Janes
Complaint and patch from Zoltán Böszörményi.
When cross-compiling, the native make doesn't know
about the Windows .exe suffix, so it only builds with
it when explicitly told to do so.
The native make will not see the link between the target
name and the built executable, and might this do unnecesary
work, but that's a bigger problem than this one, if in fact
we consider it a problem at all.
Back-patch to all live branches.
Use of SnapshotNow is known to expose us to race conditions if the tuple(s)
being sought could be updated by concurrently-committing transactions.
CREATE DATABASE and DROP DATABASE are particularly exposed because they do
heavyweight filesystem operations during their scans of pg_tablespace,
so that the scans run for a very long time compared to most. Furthermore,
the potential consequences of a missed or twice-visited row are nastier
than average:
* createdb() could fail with a bogus "file already exists" error, or
silently fail to copy one or more tablespace's worth of files into the
new database.
* remove_dbtablespaces() could miss one or more tablespaces, thus failing
to free filesystem space for the dropped database.
* check_db_file_conflict() could likewise miss a tablespace, leading to an
OID conflict that could result in data loss either immediately or in
future operations. (This seems of very low probability, though, since a
duplicate database OID would be unlikely to start with.)
Hence, it seems worth fixing these three places to use MVCC snapshots, even
though this will someday be superseded by a generic solution to SnapshotNow
race conditions.
Back-patch to all active branches.
Stephen Frost and Tom Lane
"none" could mislead to think that you're connected a database with that
name. Also, it needs to be translated, which might be hard without some
context. So in back-branches, use empty string, so that the message is
(currently ""), which is at least unambiguous and doens't require
translation. In master, it's no problem to add translatable strings, so use
a different fix there.
Dates outside the supported range could be entered, but would not print
reasonably, and operations such as conversion to timestamp wouldn't behave
sanely either. Since this has the potential to result in undumpable table
data, it seems worth back-patching.
Hitoshi Harada
This seems to have been invented in 2011 to represent GMT+3, non daylight
savings rules, as now used in Europe/Kaliningrad and Europe/Minsk.
There are no conflicts so might as well add it to the Default list.
Per bug #7804 from Ruslan Izmaylov.
transformExpr() is required to cope with already-transformed expression
trees, for various ugly-but-not-quite-worth-cleaning-up reasons. However,
some of its newer subroutines hadn't gotten the memo. This accounts for
bug #7763 from Norbert Buchmuller: transformRowExpr() was overwriting the
previously determined type of a RowExpr during CREATE TABLE LIKE INCLUDING
INDEXES. Additional investigation showed that transformXmlExpr had the
same kind of problem, but all the other cases seem to be safe.
Andres Freund and Tom Lane
If a relation file was removed when the server-side counterpart of
pg_basebackup was just about to open it to send it to the client, you'd
get a "could not open file" error. Fix that.
Backpatch to 9.1, this goes back to when pg_basebackup was introduced.
If pg_extension_config_dump() is executed again for a table already listed
in the extension's extconfig, the code was blindly making a new array entry.
This does not seem useful. Fix it to replace the existing array entry
instead, so that it's possible for extension update scripts to alter the
filter conditions for configuration tables.
In addition, teach ALTER EXTENSION DROP TABLE to check for an extconfig
entry for the target table, and remove it if present. This is not a 100%
solution because it's allowed for an extension update script to just
summarily DROP a member table, and that code path doesn't go through
ExecAlterExtensionContentsStmt. We could probably make that case clean
things up if we had to, but it would involve sticking a very ugly wart
somewhere in the guts of dependency.c. Since on the whole it seems quite
unlikely that extension updates would want to remove pre-existing
configuration tables, making the case possible with an explicit command
seems sufficient.
Per bug #7756 from Regina Obe. Back-patch to 9.1 where extensions were
introduced.
After the recovery target timeline is changed, we would still recycle and
preallocate WAL segments on the old target timeline. Those WAL segments
created for the old timeline are a waste of space, although otherwise
harmless.
The problem is that when installing a recycled WAL segment as a future one,
ThisTimeLineID is used to construct the filename. ThisTimeLineID is
initialized in the checkpointer process to the recovery target timeline at
startup, but it was not updated when the startup process chooses a new
target timeline (recovery_target_timeline='latest'). To fix, always update
ThisTimeLineID before recycling WAL segments at a restartpoint.
This still leaves a small window where we might install WAL segments under
wrong timeline ID, if the target timeline is changed just as we're about to
start recycling. Also, when we're not on the target timeline yet, but still
replaying some older timeline, we'll install WAL segments to the newer
timeline anyway and they will still go wasted. We'll just live with the
waste in that situation.
Commit to 9.2 and 9.1. Older versions didn't change recovery target timeline
after startup, and for master, I'll commit a slightly different variant of
this.
Some versions of libedit expose bogus definitions of setproctitle(),
optreset, and perhaps other symbols that we don't want configure to pick up
on. There was a previous report of similar problems with strlcpy(), which
we addressed in commit 59cf88da91bc88978b05275ebd94ac2d980c4047, but the
problem has evidently grown in scope since then. In hopes of not having to
deal with it again in future, rearrange configure's tests for supplied
functions so that we ignore libedit/libreadline except when probing
specifically for functions we expect them to provide.
Per report from Christoph Berg, though this is slightly more aggressive
than his proposed patch.
During crash recovery, we remove disk files belonging to temporary tables,
but the system catalog entries for such tables are intentionally not
cleaned up right away. Instead, the first backend that uses a temp schema
is expected to clean out any leftover objects therein. This approach
requires that we be careful to ignore leftover temp tables (since any
actual access attempt would fail), *even if their BackendId matches our
session*, if we have not yet established use of the session's corresponding
temp schema. That worked fine in the past, but was broken by commit
debcec7dc31a992703911a9953e299c8d730c778 which incorrectly removed the
rd_islocaltemp relcache flag. Put it back, and undo various changes
that substituted tests like "rel->rd_backend == MyBackendId" for use
of a state-aware flag. Per trouble report from Heikki Linnakangas.
Back-patch to 9.1 where the erroneous change was made. In the back
branches, be careful to add rd_islocaltemp in a spot in the struct that
was alignment padding before, so as not to break existing add-on code.
We failed to ever fill the sixth line (LISTEN_ADDR), which caused the
attempt to fill the seventh line (SHMEM_KEY) to fail, so that the shared
memory key never got added to the file in standalone mode. This has been
broken since we added more content to our lock files in 9.1.
To fix, tweak the logic in CreateLockFile to add an empty LISTEN_ADDR
line in standalone mode. This is a tad grotty, but since that function
already knows almost everything there is to know about the contents of
lock files, it doesn't seem that it's any better to hack it elsewhere.
It's not clear how significant this bug really is, since a standalone
backend should never have any children and thus it seems not critical
to be able to check the nattch count of the shmem segment externally.
But I'm going to back-patch the fix anyway.
This problem had escaped notice because of an ancient (and in hindsight
pretty dubious) decision to suppress LOG-level messages by default in
standalone mode; so that the elog(LOG) complaint in AddToDataDirLockFile
that should have warned of the problem didn't do anything. Fixing that
is material for a separate patch though.
The dynahash code requires the number of buckets in a hash table to fit
in an int; but since we calculate the desired hash table size dynamically,
there are various scenarios where we might calculate too large a value.
The resulting overflow can lead to infinite loops, division-by-zero
crashes, etc. I (tgl) had previously installed some defenses against that
in commit 299d1716525c659f0e02840e31fbe4dea3, but that covered only one
call path. Moreover it worked by limiting the request size to work_mem,
but in a 64-bit machine it's possible to set work_mem high enough that the
problem appears anyway. So let's fix the problem at the root by installing
limits in the dynahash.c functions themselves.
Trouble report and patch by Jeff Davis.
All versions of pg_upgrade upgraded invalid indexes caused by CREATE
INDEX CONCURRENTLY failures and marked them as valid. The patch adds a
check to all pg_upgrade versions and throws an error during upgrade or
--check.
Backpatch to 9.2, 9.1, 9.0. Patch slightly adjusted.
EndRecPtr is the last record that we've read, but not necessarily yet
replayed. CheckRecoveryConsistency should compare minRecoveryPoint with the
last replayed record instead. This caused recovery to think it's reached
consistency too early.
Now that we do the check in CheckRecoveryConsistency correctly, we have to
move the call of that function to after redoing a record. The current place,
after reading a record but before replaying it, is wrong. In particular, if
there are no more records after the one ending at minRecoveryPoint, we don't
enter hot standby until one extra record is generated and read by the
standby, and CheckRecoveryConsistency is called. These two bugs conspired
to make the code appear to work correctly, except for the small window
between reading the last record that reaches minRecoveryPoint, and
replaying it.
In the passing, rename recoveryLastRecPtr, which is the last record
replayed, to lastReplayedEndRecPtr. This makes it slightly less confusing
with replayEndRecPtr, which is the last record read that we're about to
replay.
Original report from Kyotaro HORIGUCHI, further diagnosis by Fujii Masao.
Backpatch to 9.0, where Hot Standby subtly changed the test from
"minRecoveryPoint < EndRecPtr" to "minRecoveryPoint <= EndRecPtr". The
former works because where the test is performed, we have always read one
more record than we've replayed.
Normally each module is tested in a database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This new mode, enabled by adding USE_MODULE_DB=1 to the make command
line, runs most modules in a database with the module name embedded in
it.
This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.
Second attempt at this, this time accomodating make versions older
than 3.82.
Still to be done: adapt to the MSVC build system.
Backpatch to 9.0, which is the earliest version it is reasonably
possible to test upgrading from.
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Per report from Kyotaro HORIGUCHI. Backpatch to 8.4. Before that,
minRecoveryPoint was not updated during recovery at all.
If we're not in hot standby mode, then there's no way for users to connect
to reset the recoveryPause flag, so we shouldn't pause. The code was aware
of this but the test to see if pausing was safe was seriously inadequate:
it wasn't paying attention to reachedConsistency, and besides what it was
testing was that we could legally enter hot standby, not that we have
done so. Get rid of that in favor of checking LocalHotStandbyActive,
which because of the coding in CheckRecoveryConsistency is tantamount to
checking that we have told the postmaster to enter hot standby.
Also, move the recoveryPausesHere() call that reacts to asynchronous
recoveryPause requests so that it's not in the middle of application of a
WAL record. I put it next to the recoveryStopsHere() call --- in future
those are going to need to interact significantly, so this seems like a
good waystation.
Also, don't bother trying to read another WAL record if we've already
decided not to continue recovery. This was no big deal when the code was
written originally, but now that reading a record might entail actions like
fetching an archive file, it seems a bit silly to do it like that.
Per report from Jeff Janes and subsequent discussion. The pause feature
needs quite a lot more work, but this gets rid of some indisputable bugs,
and seems safe enough to back-patch.
During VACUUM if we pause to perform a cycle
of index cleanup we drop the vmbuffer pin,
so we should do the same thing when heap
scan completes. This avoids holding vmbuffer
pin across the main index cleanup in VACUUM,
which could be minutes or hours longer than
necessary for correctness.
Bug report and suggested fix from Pavan Deolasee
