* Fixes zstd-dll build (https://github.com/facebook/zstd/issues/3492):
- Adds pool.o and threading.o dependency to the zstd-dll target
- Moves custom allocation functions into header to avoid needing to add dependency on common.o
- Adds test target for zstd-dll
- Adds github workflow that buildis zstd-dll
* fix and test MSVC AVX2 build
* treat msbuild warnings as errors
* fix incorrect MSVC 2019 compiler warning
* fix MSVC error D9035: option 'Gm' has been deprecated and will be removed in a future release
In 32-bit mode, ZSTD_getOffsetInfo() can be called when nbSeq == 0, and
in this case the offset table is uninitialized. The function should just
return 0 for both values, because there are no sequences.
Credit to OSS-Fuzz
The 32-bit decoder could corrupt the regenerated data by using regular
offset mode when there were actually long offsets. This is because we
were only considering the window size in the calculation, not the
dictionary size. So a large dictionary could allow longer offsets.
Fix this in two ways:
1. Instead of looking at the window size, look at the total referencable
bytes in the history buffer. Use this in the comparison instead of
the window size. Additionally, we were comparing against the wrong
value, it was too low. Fix that by computing exactly the maximum
offset for regular sequence decoding.
2. If it is possible that we have long offsets due to (1), then check
the offset code decoding table, and if the decoding table's maximum
number of additional bits is no more than STREAM_ACCUMULATOR_MIN,
then we can't have long offsets.
This gates us to be using the long offsets decoder only when we are very
likely to actually have long offsets.
Note that this bug only affects the decoding of the data, and the
original compressed data, if re-read with a patched decoder, will
correctly regenerate the orginal data. Except that the encoder also had
the same issue previously.
This fixes both the open OSS-Fuzz issues.
Credit to OSS-Fuzz
The previous code had an issue when `bitsConsumed == 32` it would read 0
bits for the `ofBits` read, which violates the precondition of
`BIT_readBitsFast()`. This can happen when the stream is corrupted.
Fix thie issue by always reading the maximum possible number of extra
bits. I've measured neutral decoding performance, likely because this
branch is unlikely, but this should be faster anyways. And if not, it is
only 32-bit decoding, so performance isn't as critical.
Credit to OSS-Fuzz
The input bounds checks were buggy because they were only breaking from
the inner loop, not the outer loop. The fuzzers found this immediately.
The fix is to use `goto _out` instead of `break`.
This condition can happen on corrupted inputs.
I've benchmarked before and after on x86-64 and there were small changes
in performance, some positive, and some negative, and they end up about
balacing out.
Credit to OSS-Fuzz
Add generic C versions of the fast decoding loops to serve architectures
that don't have an assembly implementation. Also allow selecting the C
decoding loop over the assembly decoding loop through a zstd
decompression parameter `ZSTD_d_disableHuffmanAssembly`.
I benchmarked on my Intel i9-9900K and my Macbook Air with an M1 processor.
The benchmark command forces zstd to compress without any matches, using
only literals compression, and measures only Huffman decompression speed:
```
zstd -b1e1 --compress-literals --zstd=tlen=131072 silesia.tar
```
The new fast decoding loops outperform the previous implementation uniformly,
but don't beat the x86-64 assembly. Additionally, the fast C decoding loops suffer
from the same stability problems that we've seen in the past, where the assembly
version doesn't. So even though clang gets close to assembly on x86-64, it still
has stability issues.
| Arch | Function | Compiler | Default (MB/s) | Assembly (MB/s) | Fast (MB/s) |
|---------|----------------|--------------|----------------|-----------------|-------------|
| x86-64 | decompress 4X1 | gcc-12.2.0 | 1029.6 | 1308.1 | 1208.1 |
| x86-64 | decompress 4X1 | clang-14.0.6 | 1019.3 | 1305.6 | 1276.3 |
| x86-64 | decompress 4X2 | gcc-12.2.0 | 1348.5 | 1657.0 | 1374.1 |
| x86-64 | decompress 4X2 | clang-14.0.6 | 1027.6 | 1659.9 | 1468.1 |
| aarch64 | decompress 4X1 | clang-12.0.5 | 1081.0 | N/A | 1234.9 |
| aarch64 | decompress 4X2 | clang-12.0.5 | 1270.0 | N/A | 1516.6 |
* deprecate advanced streaming functions
* remove internal usage of the deprecated functions
* nit
* suppress warnings in tests/zstreamtest.c
* purge ZSTD_initDStream_usingDict
* nits
* c90 compat
* zstreamtest.c already disables deprecation warnings!
* fix initDStream() return value
* fix typo
* wasn't able to import private symbol properly, this commit works around that
* new strategy for zbuff
* undo zbuff deprecation warning changes
* move ZSTD_DISABLE_DEPRECATE_WARNINGS from .h to .c
* Add a function and macro ZSTD_decompressionMargin() that computes the
decompression margin for in-place decompression. The function computes
a tight margin that works in all cases, and the macro computes an upper
bound that will only work if flush isn't used.
* When doing in-place decompression, make sure that our output buffer
doesn't overlap with the input buffer. This ensures that we don't
decide to use the portion of the output buffer that overlaps the input
buffer for temporary memory, like for literals.
* Add a simple unit test.
* Add in-place decompression to the simple_round_trip and
stream_round_trip fuzzers. This should help verify that our margin stays
correct.
A minor change in 5434de0 changed a `<=` into a `<`,
and as an indirect consequence allowed compression attempt of literals when there are only 6 literals to compress
(previous limit was effectively 7 literals).
This is not in itself a problem, as the threshold is merely an heuristic,
but it emerged a bug that has always been there, and was just never triggered so far due to the previous limit.
This bug would make the literal compressor believes that all literals are the same symbol,
but for the exact case where nbLiterals==6, plus a pretty wild combination of other limit conditions,
this outcome could be false, resulting in data corruption.
Replaced the blind heuristic by an actual test for all limit cases,
so that even if the threshold is changed again in the future,
the detection of RLE mode will remain reliable.
Reported by @shulib :
the specification for 4-streams mode
doesn't work when the amount of literals to compress is 5 bytes.
Extending it, it also doesn't work for sizes 1 or 2.
This patch updates the specification and the implementation
to require a minimum of 6 literals to trigger or accept the 4-streams mode.
The impact is expected to be a no-op :
the 4-streams mode is never triggered for such small quantity of literals anyway,
since it would be wasteful (it costs ~7.3 bytes more than single-stream mode).
An informal lower limit is set at ~256 bytes,
so the technical minimum is very far from this limit.
This is just meant for completeness of the specification.
```
for f in $(find . \( -path ./.git -o -path ./tests/fuzz/corpora \) -prune -o -type f);
do
sed -i 's/Facebook, Inc\./Meta Platforms, Inc. and affiliates./' $f;
done
```
Fix an instance of `NULL + 0` in `ZSTD_decompressStream()`. Also, improve our
`stream_decompress` fuzzer to pass `NULL` in/out buffers to
`ZSTD_decompressStream()`, and fix 2 issues that were immediately surfaced.
Fixes#3351
Currently this function actually reads the dict ID from the dictionary's
header, via `ZSTD_getDictID_fromDict()`. But during decompression the decomp-
ressor actually compares the dict ID in the frame header with the dict ID in
the DDict. Now of course the dict ID in the dictionary contents and the dict
ID in the DDict struct *should* be the same. But in cases of memory corrupt-
ion, where they can drift out of sync, it's misleading for this function to
read it again from the dict buffer rather then return the dict ID that will
actually be used.
Also doing it this way avoids rechecking the magic and so on and so it is a
tiny bit more efficient.
Fixes#3212.
Long literal and match lengths had an off-by-one error in ZSTD_getSequenceLength.
Fix the off-by-one error, and add a golden compression test that catches the bug.
Also run all the golden tests in the cli-tests framework.
With statistic data of test data files of silesia
the chance of position beyond highThreshold is very
low (~1.3%@L8 in most cases, all <2.5%), and is in
"lowprob area". Add the branch hint so compiler can
get better pipiline codegen.
With this change it is observed ~1% of mozilla and
xml, and slight (0.3%~0.8%) but consistent uplift on
other files on Arm N1.
Signed-off-by: Jun He <jun.he@arm.com>
Change-Id: Id9ba1d5c767e975290b5c1bf0ecce906544f4ade
match is used for following sequence copy. It is
only updated when extDict is needed, which is a
low probability case. So it can be prefetched to
reduce cache miss.
The benchmarks on various Arm platforms showed
uplift from 1% ~ 14% with gcc-11/clang-14.
Signed-off-by: Jun He <jun.he@arm.com>
Change-Id: If201af4799d2455d74c79f8387404439d7f684ae
* Intial commit to address 3090. Added support to decompress empty block
* Update zstd_decompress_block.c
Addressed review comments for the case of 'set_basic'
* Update lib/decompress/zstd_decompress_block.c
Co-authored-by: Nick Terrell <nickrterrell@gmail.com>
* Update lib/decompress/zstd_decompress_block.c
Co-authored-by: Nick Terrell <nickrterrell@gmail.com>
Co-authored-by: Nick Terrell <nickrterrell@gmail.com>
Streaming decompression used to wait for a minimum of 5 bytes before attempting decoding.
This meant that, in the case that only a few bytes (<5) were provided,
and assuming these bytes are incorrect,
there would be no error reported.
The streaming API would simply request more data, waiting for at least 5 bytes.
This PR makes it possible to detect incorrect Frame IDs as soon as the first byte is provided.
Fix#3169
ZSTD_seqSymbol is a structure with total of 64 bits
wide. So it can be loaded in one operation and
extract its fields by simply shifting or extracting
on aarch64.
GCC doesn't recognize this and generates more
unnecessary ldr/ldrb/ldrh operations that cause
performance drop.
With this change it is observed 2~4% uplift of
silesia and 2.5~6% of cantrbry @L8 on Arm N1.
Signed-off-by: Jun He <jun.he@arm.com>
Change-Id: I7748909204cf78a17eb9d4f2333692d53239daa8
