This is to handle the case of deleting lots of "bot" devices at once.
Reviewable commit-by-commit
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
<ol>
<li>
Reorder columns in `event_txn_id_device_id_txn_id` index \
This now satisfies the foreign key on `(user_id, device_id)` making
reverse lookups, as needed for device deletions, more efficient.
This improves device deletion performance by on the order of 8 to 10×
on matrix.org.
</li>
</ol>
Rationale:
## On the `event_txn_id_device_id` table:
We currently have this index:
```sql
-- This ensures that there is only one mapping per (room_id, user_id, device_id, txn_id) tuple.
CREATE UNIQUE INDEX IF NOT EXISTS event_txn_id_device_id_txn_id
ON event_txn_id_device_id(room_id, user_id, device_id, txn_id);
```
The main way we use this table is
```python
return await self.db_pool.simple_select_one_onecol(
table="event_txn_id_device_id",
keyvalues={
"room_id": room_id,
"user_id": user_id,
"device_id": device_id,
"txn_id": txn_id,
},
retcol="event_id",
allow_none=True,
desc="get_event_id_from_transaction_id_and_device_id",
)
```
But this foreign key is relatively unsupported, making deletions in
the devices table inefficient (full index scan on the above index):
```sql
FOREIGN KEY (user_id, device_id)
REFERENCES devices (user_id, device_id) ON DELETE CASCADE
```
I propose re-ordering the columns in that index to: `(user_id,
device_id, room_id, txn_id)` (by replacing it).
That way the foreign key back-check can rely on the prefix of this
index, but it's still useful for the original purpose it was made for.
It doesn't take any extra disk space and does not harm write performance
(because the same amount of writing work needs to be performed).
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
It came up that this was somewhat confusing and an example might help.
So here's an example :)
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
When a request gets ratelimited we (optionally) wait ~500ms before
returning to mitigate clients that like to tightloop on request
failures. However, this is currently implemented by pausing request
processing when we check for ratelimits, which might be deep within
request processing, and e.g. while locks are held. Instead, let's hoist
the pause to the very top of the HTTP handler.
Hopefully, this mitigates the issue where a user sending lots of events
to a single room can see their requests time out due to the combination
of the linearizer and the pausing of the request. Instead, they should
see the requests 429 after ~500ms.
The first commit is a refactor to pass the `Clock` to `AsyncResource`,
the second commit is the behavioural change.
The background updates are being registered on an object that is for the
_state_ database, but the actual tables are on the _main_ database. This
just moves them to a different store that can access the right stuff.
I noticed this when trying to do a full schema dump cause I was curious
what has changed since the last one.
Fixes#16054
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct (run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
We do this by shoving it into Rust. We believe our python http client is
a bit slow.
Also bumps minimum rust version to 1.81.0, released last September (over
six months ago)
To allow for async Rust, includes some adapters between Tokio in Rust
and the Twisted reactor in Python.
This was correctly handled for the "fallback" case where the background
updates hadn't finished
---------
Co-authored-by: Eric Eastwood <erice@element.io>
This can be reviewed commit by commit.
This enables the `flake8-logging` and `flake8-logging-format` rules in
Ruff, as well as logging exception stack traces in a few places where it
makes sense
- https://docs.astral.sh/ruff/rules/#flake8-logging-log
- https://docs.astral.sh/ruff/rules/#flake8-logging-format-g
### Linting to avoid pre-formatting log messages
See [`adamchainz/flake8-logging` -> *LOG011 avoid pre-formatting log
messages*](152db2f167/README.rst (log011-avoid-pre-formatting-log-messages))
Practically, this means prefer placeholders (`%s`) over f-strings for
logging.
This is because placeholders are passed as args to loggers, so they can
do special handling of them.
For example, Sentry will record the args separately in their logging
integration:
c15b390dfe/sentry_sdk/integrations/logging.py (L280-L284)
One theoretical small perf benefit is that log levels that aren't
enabled won't get formatted, so it doesn't unnecessarily create
formatted strings
This small PR migrates from `unittest.assertEquals` to
`unittest.assertEqual` which is deprecated from Python2.7:
```python
DeprecationWarning: Please use assertEqual instead.
```
Signed-off-by: Emmanuel Ferdman <emmanuelferdman@gmail.com>
Fixes https://github.com/element-hq/synapse/issues/14240
This scratches an itch that i've had for years. We regularly run into
the issue where (especially in development) appservices can go down for
a period and them come back up. The ping endpoint was introduced some
time ago which means Synapse can determine if an AS is up more or less
immediately, so we might as well use that to schedule transaction
redelivery.
I believe transaction scheduling logic is largely implementation
specific, so we should be in the clear to do this without any spec
changes.
(Applies to the Grafana graphs)
As discovered by @devonh, we use `synapse_storage_events_persisted_events_total` (which tracks *all* persisted events) for the "Events" rate in the "Event Send Time Quantiles" graph. This is pretty misleading as I would expect it to be the rate of events being sent given the graph title, "Event Send Time Quantiles".
Since the event persistence queues are shared for local and remote events from federation and will block local events being sent, I think it does still make sense to have the event persist rate. I've updated the graph to include the rate of "Local events being persisted" and the rate of "All events being persisted". I think this properly disambiguates and clarifies what the graph is trying to show.
Clean up `received_transactions` older than 1 day, rather than 30 days \
Reduces disk waste by homeservers
Closes#6437
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
This implements
https://github.com/matrix-org/matrix-spec-proposals/pull/4155, which
adds support for a new account data type that blocks an invite based on
some conditions in the event contents.
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This PR adds an additional `room_config` argument to the
`user_may_create_room` spam checker module API callback.
It will continue to work with implementations of `user_may_create_room`
that do not expect the additional parameter.
A side affect is that on a room upgrade the spam checker callback is
called *after* doing some work to calculate the state rather than
before. However, I hope that this is acceptable given the relative
infrequency of room upgrades.
Bumps [lxml](https://github.com/lxml/lxml) from 5.3.0 to 5.4.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lxml/lxml/releases">lxml's
releases</a>.</em></p>
<blockquote>
<h2>lxml-5.4.0</h2>
<h1>5.4.0 (2025-04-22)</h1>
<h2>Bugs fixed</h2>
<ul>
<li>LP#2107279: Binary wheels use libxml2 2.13.8 and libxslt 1.1.43 to
resolve several CVEs.
(Binary wheels for Windows continue to use a patched libxml2 2.11.9 and
libxslt 1.1.39.)
Issue found by Anatoly Katyushin, see <a
href="https://bugs.launchpad.net/lxml/+bug/2107279">https://bugs.launchpad.net/lxml/+bug/2107279</a></li>
</ul>
<h2>lxml-5.3.2</h2>
<p>No release notes provided.</p>
<h2>lxml-5.3.1</h2>
<p>No release notes provided.</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/lxml/lxml/blob/master/CHANGES.txt">lxml's
changelog</a>.</em></p>
<blockquote>
<h1>5.4.0 (2025-04-22)</h1>
<h2>Bugs fixed</h2>
<ul>
<li>LP#2107279: Binary wheels use libxml2 2.13.8 and libxslt 1.1.43 to
resolve several CVEs.
(Binary wheels for Windows continue to use a patched libxml2 2.11.9 and
libxslt 1.1.39.)
Issue found by Anatoly Katyushin.</li>
</ul>
<h1>5.3.2 (2025-04-05)</h1>
<p>This release resolves CVE-2025-24928 as described in
<a
href="https://gitlab.gnome.org/GNOME/libxml2/-/issues/847">https://gitlab.gnome.org/GNOME/libxml2/-/issues/847</a></p>
<h2>Bugs fixed</h2>
<ul>
<li>
<p>Binary wheels use libxml2 2.12.10 and libxslt 1.1.42.</p>
</li>
<li>
<p>Binary wheels for Windows use a patched libxml2 2.11.9 and libxslt
1.1.39.</p>
</li>
</ul>
<h1>5.3.1 (2025-02-09)</h1>
<h2>Bugs fixed</h2>
<ul>
<li>
<p>GH#440: Some tests were adapted for libxml2 2.14.0.
Patch by Nick Wellnhofer.</p>
</li>
<li>
<p>LP#2097175: <code>DTD(external_id="…")</code> erroneously
required a byte string as ID value.</p>
</li>
<li>
<p>GH#450: <code>iterparse()</code> internally triggered the
`DeprecationWarning`` added in lxml 5.3.0 when parsing HTML.</p>
</li>
</ul>
<h2>Other changes</h2>
<ul>
<li>GH#442: Binary wheels for macOS no longer use the linker flag
<code>-flat_namespace</code>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="6e76d57af8"><code>6e76d57</code></a>
Build: Exclude slow Py3.9 wheel builds for s390/ppc and Py3.7 for
ARM64.</li>
<li><a
href="ee10c02bb7"><code>ee10c02</code></a>
Prepare release of lxml 5.4.0.</li>
<li><a
href="0e4f3c3372"><code>0e4f3c3</code></a>
Prepare release of lxml 5.3.3.</li>
<li><a
href="b4703fc2e7"><code>b4703fc</code></a>
Update changelog.</li>
<li><a
href="db723bb3b9"><code>db723bb</code></a>
Build: Use libxslt 1.1.43 instead of 1.1.42 to resolve some CVEs.</li>
<li><a
href="a664877bde"><code>a664877</code></a>
Build: Use libxml2 2.13.8 instead of 2.12.x to resolve some CVEs.</li>
<li><a
href="df4633e7a9"><code>df4633e</code></a>
Remove appveyor usage.</li>
<li><a
href="820db896be"><code>820db89</code></a>
CI: Allow Py3.14 jobs to fail.</li>
<li><a
href="93ad02aad6"><code>93ad02a</code></a>
docs: Add a note about C compiler installation to error message (<a
href="https://redirect.github.com/lxml/lxml/issues/454">GH-454</a>)</li>
<li><a
href="16878dac70"><code>16878da</code></a>
Add some hints to the documentation on how to build lxml (<a
href="https://redirect.github.com/lxml/lxml/issues/453">GH-453</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/lxml/lxml/compare/lxml-5.3.0...lxml-5.4.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps
[types-jsonschema](https://github.com/typeshed-internal/stub_uploader)
from 4.23.0.20241208 to 4.23.0.20250516.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/typeshed-internal/stub_uploader/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This PR addresses a test failure for
`tests.handlers.test_worker_lock.WorkerLockTestCase.test_lock_contention`
which consistently times out on the RISC-V (specifically `riscv64`)
architecture.
The test simulates high lock contention and has a default timeout of 5
seconds, which seems sufficient for architectures like x86_64 but proves
too short for current RISC-V hardware/environment performance
characteristics, leading to spurious `tests.utils.TestTimeout` failures.
This fix introduces architecture detection using `platform.machine()`.
If a RISC-V architecture is detected:
* The timeout for this specific test is increased (e.g., to 15 seconds
).
The original, stricter timeout (5 seconds) and lock count (500) are
maintained for all other architectures to avoid masking potential
performance regressions elsewhere.
This change has been tested locally on RISC-V, where the test now passes
reliably, and on x86_64, where it continues to pass with the original
constraints.
---
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch *(Assuming you based
it correctly)*
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
*(See below)*
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct (run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
*(Please run linters locally)*
A race-condition may render concurrent retry loops.
Use an actual `Lock` for guarding single access of device resyncing
retrying.
### Pull Request Checklist
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
Roughly reviewable commit-by-commit.
This is the first part of adding policy server support to Synapse. Other
parts (unordered), which may or may not be bundled into fewer PRs,
include:
* Implementation of a bulk API
* Supporting a moderation server config (the `fallback_*` options of
https://github.com/element-hq/policyserv_spam_checker )
* Adding an "early event hook" for appservices to receive federation
transactions *before* events are processed formally
* Performance and stability improvements
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: turt2live <1190097+turt2live@users.noreply.github.com>
Co-authored-by: Devon Hudson <devon.dmytro@gmail.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Andrew Morgan <andrew@amorgan.xyz>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Synapse previously did not correctly cap the max depth of an event to
the max canonical json int. This can cause ordering issues for any
events that were sent locally at the time.
This background update goes and correctly caps the topological ordering
to the new `MAX_DEPTH`.
c.f. GHSA-v56r-hwv5-mxg6
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Follow on from #18375. This prevents blocking startup on creating the
index, which can take a while
---------
Co-authored-by: Devon Hudson <devon.dmytro@gmail.com>
Spawning from using this code elsewhere and not knowing why it's there.
Based on this article and @reivilibre's experience mentioning
`PYTHONUNBUFFERED=1`,
> #### programming languages where the default “print” statement buffers
>
> Also, here are a few programming language where the default print
statement will buffer output when writing to a pipe, and some ways to
disable buffering if you want:
>
> - Python (disable with `python -u`, or `PYTHONUNBUFFERED=1`, or
`sys.stdout.reconfigure(line_buffering=False)`, or `print(x,
flush=True)`)
>
> _--
https://jvns.ca/blog/2024/11/29/why-pipes-get-stuck-buffering/#programming-languages-where-the-default-print-statement-buffers_
Fix a couple type annotations in the `RootConfig`/`Config`. Discovered
while cribbing this code for another project.
It's really sucks that `mypy` type checking doesn't catch this. I assume
this is because we also have a `synapse/config/_base.pyi` that overrides
all of this. Still unclear to me why the `Iterable[str]` vs
`StrSequence` issue wasn't caught as that's what `ConfigError` expects.
Spawning from
https://github.com/element-hq/synapse/pull/18375#discussion_r2071768635,
This updates some sliding sync tests to use a higher level function in
order to move test coverage to cover both fallback & new tables.
Important when https://github.com/element-hq/synapse/pull/18375 is
merged.
In other words, adjust tests to target `compute_interested_room(...)`
(relevant to both new and fallback path) instead of the lower level
`get_room_membership_for_user_at_to_token(...)` that only applies to the
fallback path.
### Dev notes
```
SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.handlers.test_sliding_sync.ComputeInterestedRoomsTestCase_new
```
```
SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.rest.client.sliding_sync
```
```
SYNAPSE_POSTGRES=1 SYNAPSE_POSTGRES_USER=postgres SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.handlers.test_sliding_sync.ComputeInterestedRoomsTestCase_new.test_display_name_changes_leave_after_token_range
```
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Eric Eastwood <erice@element.io>
This change adds a new configuration
`user_directory.exclude_remote_users`, which defaults to False.
When set to True, remote users will not appear in user directory search
results.
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This should be reviewed commit by commit.
It adds a few admin servlets that are used by MAS when in delegation
mode to workers
---------
Co-authored-by: Olivier 'reivilibre <oliverw@matrix.org>
Co-authored-by: Devon Hudson <devon.dmytro@gmail.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Since MAS 0.13.0, the provisionning of devices and users is done
synchronously and reliably enough that we don't need to auto-provision
on the Synapse side anymore.
It's important to remove this behaviour if we want to start caching
token introspection results.
Use absolute path for python in script shebang, and invoke child python
processes with sys.executable. This is consistent with the absolute path
used to invoke python elsewhere (like in the supervisor config).
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Quentin Gliech <quenting@element.io>
- Use a `uv:python` image for the first build layer, to reduce the
number of intermediate images required, as the
main Dockerfile uses that image already
- Use a cache mount for `apt` commands
- Skip a pointless install of `redis-server`, since the redis Docker
image is copied from instead
- Move some RUN steps out of the final image layer & into the build
layer
Depends on https://github.com/element-hq/synapse/pull/18275
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
See #18260
This is useful for anyone who tried Synapse v1.129.0rc1 out
Fixes#18349
To test:
- checkout v1.129.0rc1 and start
- check that the events table has the trigger (`\dS events` with
postgres)
- checkout this PR and start
- check that the events table doesn't have the trigger anymore
These are some improvements to `on_new_event` which is a hot path. Not
sure how much this will save, but maybe like ~5%?
Possibly easier to review commit-by-commit
Bumps [types-psycopg2](https://github.com/python/typeshed) from
2.9.21.20250121 to 2.9.21.20250318.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
We can't move PUT/DELETE as they do need to happen on main process (due
to notification of device changes).
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Reverts element-hq/synapse#18260
It is causing a failure when building release debs for `debian:bullseye`
with the following error:
```
sqlite3.OperationalError: near "RETURNING": syntax error
```
Follow on from #18068
Currently the subquery in `UPDATE` is pointless, as it will still just
update all `room_membership` rows. Instead, we should look at the
current membership event ID (which is easily retrieved from
`local_current_membership`). We also add a `AND NOT participant` to noop
the `UPDATE` when the `participant` flag is already set.
cc @H-Shay
# Add passthrough_authorization_parameters support to OIDC configuration
This PR adds `the passthrough_authorization_parameters` option to OIDC
configuration, allowing specific query parameters (like `login_hint`) to
be passed from the redirect endpoint to the authorization grant URL.
This enables clients to provide additional context to identity providers
during authentication flows.
# Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Quentin Gliech <quenting@element.io>
Bumps
[phonenumbers](https://github.com/daviddrysdale/python-phonenumbers)
from 8.13.50 to 9.0.2.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="73ef5e664b"><code>73ef5e6</code></a>
Prep for 9.0.2 release</li>
<li><a
href="528a98bc75"><code>528a98b</code></a>
Generated files for metadata</li>
<li><a
href="28f5958abd"><code>28f5958</code></a>
Merge metadata changes from upstream 9.0.2</li>
<li><a
href="25ae49c160"><code>25ae49c</code></a>
Prep for 9.0.1 release</li>
<li><a
href="b8a1459cef"><code>b8a1459</code></a>
Generated files for metadata</li>
<li><a
href="f6cd233359"><code>f6cd233</code></a>
Merge metadata changes from upstream 9.0.1</li>
<li><a
href="c46f1049ba"><code>c46f104</code></a>
Prep for 9.0.0 release</li>
<li><a
href="d542ec2abc"><code>d542ec2</code></a>
Generated files for metadata</li>
<li><a
href="a4da80e252"><code>a4da80e</code></a>
Merge metadata changes from upstream 9.0.0</li>
<li><a
href="45c822e887"><code>45c822e</code></a>
Prep for 8.13.55 release</li>
<li>Additional commits viewable in <a
href="https://github.com/daviddrysdale/python-phonenumbers/compare/v8.13.50...v9.0.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [authlib](https://github.com/lepture/authlib) from 1.4.1 to 1.5.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lepture/authlib/releases">authlib's
releases</a>.</em></p>
<blockquote>
<h2>Version 1.5.1</h2>
<p>Released on Feb 28, 2025</p>
<ul>
<li>Fix RFC9207 iss parameter. <a
href="https://redirect.github.com/lepture/authlib/issues/715">#715</a></li>
</ul>
<h2>Version 1.5.0</h2>
<ul>
<li>Fix token introspection auth method for clients. <a
href="https://redirect.github.com/lepture/authlib/pull/662">#662</a></li>
<li>Optional typ claim in JWT tokens. <a
href="https://redirect.github.com/lepture/authlib/pull/696">#696</a></li>
<li>JWT validation leeway. <a
href="https://redirect.github.com/lepture/authlib/pull/689">#689</a></li>
<li>Implement server-side <a
href="https://datatracker.ietf.org/doc/html/rfc9207.html">RFC9207</a>.
<a
href="https://redirect.github.com/lepture/authlib/issues/700">#700</a>
<a
href="https://redirect.github.com/lepture/authlib/pull/701">#701</a></li>
<li>generate_id_token can take a kid parameter. <a
href="https://redirect.github.com/lepture/authlib/pull/702">#702</a></li>
<li>More detailed InvalidClientError. <a
href="https://redirect.github.com/lepture/authlib/pull/706">#706</a></li>
<li>OpenID Connect Dynamic Client Registration implementation. <a
href="https://redirect.github.com/lepture/authlib/pull/707">#707</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/lepture/authlib/blob/main/docs/changelog.rst">authlib's
changelog</a>.</em></p>
<blockquote>
<h2>Version 1.5.1</h2>
<p><strong>Released on Feb 28, 2025</strong></p>
<ul>
<li>Fix RFC9207 <code>iss</code> parameter. :pr:<code>715</code></li>
</ul>
<h2>Version 1.5.0</h2>
<p><strong>Released on Feb 25, 2025</strong></p>
<ul>
<li>Fix token introspection auth method for clients.
:pr:<code>662</code></li>
<li>Optional <code>typ</code> claim in JWT tokens.
:pr:<code>696</code></li>
<li>JWT validation leeway. :pr:<code>689</code></li>
<li>Implement server-side :rfc:<code>RFC9207 <9207></code>.
:issue:<code>700</code> :pr:<code>701</code></li>
<li><code>generate_id_token</code> can take a <code>kid</code>
parameter. :pr:<code>702</code></li>
<li>More detailed <code>InvalidClientError</code>.
:pr:<code>706</code></li>
<li>OpenID Connect Dynamic Client Registration implementation.
:pr:<code>707</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="4eafdc2189"><code>4eafdc2</code></a>
chore: release 1.5.1</li>
<li><a
href="0e7e344344"><code>0e7e344</code></a>
Merge pull request <a
href="https://redirect.github.com/lepture/authlib/issues/715">#715</a>
from azmeuk/rfc9207</li>
<li><a
href="b57932bc7e"><code>b57932b</code></a>
fix: RFC9207 iss parameter</li>
<li><a
href="7833a887da"><code>7833a88</code></a>
Merge pull request <a
href="https://redirect.github.com/lepture/authlib/issues/713">#713</a>
from geigerzaehler/full-entropy</li>
<li><a
href="642dfa3264"><code>642dfa3</code></a>
doc: fix an example import for rfc9207</li>
<li><a
href="5c507a8473"><code>5c507a8</code></a>
fix: Use full entropy from specified oct key size</li>
<li><a
href="2d0396e3fc"><code>2d0396e</code></a>
chore: release 1.5.0</li>
<li><a
href="da87c8b2ec"><code>da87c8b</code></a>
doc: update changelog</li>
<li><a
href="b79d868e7f"><code>b79d868</code></a>
Merge pull request <a
href="https://redirect.github.com/lepture/authlib/issues/662">#662</a>
from AdamWill/oauth2-fix-introspect-endpoint</li>
<li><a
href="24c2bd8718"><code>24c2bd8</code></a>
chore: add a dependency group for the documentation</li>
<li>Additional commits viewable in <a
href="https://github.com/lepture/authlib/compare/v1.4.1...v1.5.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
- Explicitly use `mawk` instead of `awk`, since an extension of the
former is used
- Use `fflush` to reduce interleaving the output of different processes
& streams
- Move the `mawk` command to a shell function, instead of writing it
twice
- Look up the `SUPERVISOR_PROCESS_NAME` environment variable in `mawk`,
instead of reading it in the shell & using complex quoting to pass it to
`mawk`
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Quentin Gliech <quenting@element.io>
Evolution of
cd78f3d2ee
This cache does not have any explicit invalidation, but this is deemed
acceptable (see code comment).
We may still prefer to add it eventually, letting us bump up the
Time-To-Live (TTL) on the cache as we currently set a 2 minute expiry
to balance the fact that we have no explicit invalidation.
This cache makes several things more efficient:
- reduces number of outbound requests from Synapse, reducing CPU
utilisation + network I/O
- reduces request handling time in Synapse, which improves
client-visible latency
- reduces load on MAS and its database
---
Other than that, this PR also introduces support for `expires_in`
(seconds) on the introspection response.
This lets the cached responses expire at the proper expiry time of the
access token, whilst avoiding clock skew issues.
Corresponds to:
https://github.com/element-hq/matrix-authentication-service/pull/4241
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
Bumps
[actions/upload-artifact](https://github.com/actions/upload-artifact)
from 4.6.1 to 4.6.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/upload-artifact/releases">actions/upload-artifact's
releases</a>.</em></p>
<blockquote>
<h2>v4.6.2</h2>
<h2>What's Changed</h2>
<ul>
<li>Update to use artifact 2.3.2 package & prepare for new
upload-artifact release by <a
href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> in <a
href="https://redirect.github.com/actions/upload-artifact/pull/685">actions/upload-artifact#685</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a>
made their first contribution in <a
href="https://redirect.github.com/actions/upload-artifact/pull/685">actions/upload-artifact#685</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/upload-artifact/compare/v4...v4.6.2">https://github.com/actions/upload-artifact/compare/v4...v4.6.2</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="ea165f8d65"><code>ea165f8</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/upload-artifact/issues/685">#685</a>
from salmanmkc/salmanmkc/3-new-upload-artifacts-release</li>
<li><a
href="08396203c1"><code>0839620</code></a>
Prepare for new release of actions/upload-artifact with new toolkit
cache ver...</li>
<li>See full diff in <a
href="4cec3d8aa0...ea165f8d65">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps
[actions/add-to-project](https://github.com/actions/add-to-project) from
f5473ace9aeee8b97717b281e26980aa5097023f to
280af8ae1f83a494cfad2cb10f02f6d13529caa9.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="280af8ae1f"><code>280af8a</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/add-to-project/issues/688">#688</a>
from actions/dependabot/npm_and_yarn/vercel/ncc-0.38.3</li>
<li><a
href="a5abfebda9"><code>a5abfeb</code></a>
Update licensed cache and dist/ directory</li>
<li><a
href="f30c2e67f8"><code>f30c2e6</code></a>
Bump <code>@vercel/ncc</code> from 0.38.1 to 0.38.3</li>
<li><a
href="81dd5ce97f"><code>81dd5ce</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/add-to-project/issues/687">#687</a>
from actions/dependabot/npm_and_yarn/types/jest-29.5.14</li>
<li><a
href="122a803742"><code>122a803</code></a>
Bump <code>@types/jest</code> from 29.5.12 to 29.5.14</li>
<li><a
href="29c72ac924"><code>29c72ac</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/add-to-project/issues/686">#686</a>
from actions/dependabot/npm_and_yarn/types/node-22.13.14</li>
<li><a
href="46316d9a20"><code>46316d9</code></a>
Bump <code>@types/node</code> from 16.18.101 to 22.13.14</li>
<li><a
href="95df5ae4db"><code>95df5ae</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/add-to-project/issues/685">#685</a>
from actions/dependabot/npm_and_yarn/eslint-plugin-je...</li>
<li><a
href="f14f229b02"><code>f14f229</code></a>
Bump eslint-plugin-jest from 28.6.0 to 28.11.0</li>
<li><a
href="cc696180af"><code>cc69618</code></a>
Exit without failure if nothing to commit</li>
<li>Additional commits viewable in <a
href="f5473ace9a...280af8ae1f">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [jinja2](https://github.com/pallets/jinja) from 3.1.5 to 3.1.6.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/pallets/jinja/releases">jinja2's
releases</a>.</em></p>
<blockquote>
<h2>3.1.6</h2>
<p>This is the Jinja 3.1.6 security release, which fixes security issues
but does not otherwise change behavior and should not result in breaking
changes compared to the latest feature release.</p>
<p>PyPI: <a
href="https://pypi.org/project/Jinja2/3.1.6/">https://pypi.org/project/Jinja2/3.1.6/</a>
Changes: <a
href="https://jinja.palletsprojects.com/en/stable/changes/#version-3-1-6">https://jinja.palletsprojects.com/en/stable/changes/#version-3-1-6</a></p>
<ul>
<li>The <code>|attr</code> filter does not bypass the environment's
attribute lookup, allowing the sandbox to apply its checks. <a
href="https://github.com/pallets/jinja/security/advisories/GHSA-cpwx-vrp4-4pq7">https://github.com/pallets/jinja/security/advisories/GHSA-cpwx-vrp4-4pq7</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pallets/jinja/blob/main/CHANGES.rst">jinja2's
changelog</a>.</em></p>
<blockquote>
<h2>Version 3.1.6</h2>
<p>Released 2025-03-05</p>
<ul>
<li>The <code>|attr</code> filter does not bypass the environment's
attribute lookup,
allowing the sandbox to apply its checks.
:ghsa:<code>cpwx-vrp4-4pq7</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="15206881c0"><code>1520688</code></a>
release version 3.1.6</li>
<li><a
href="90457bbf33"><code>90457bb</code></a>
Merge commit from fork</li>
<li><a
href="065334d1ee"><code>065334d</code></a>
attr filter uses env.getattr</li>
<li><a
href="033c20015c"><code>033c200</code></a>
start version 3.1.6</li>
<li><a
href="bc68d4efa9"><code>bc68d4e</code></a>
use global contributing guide (<a
href="https://redirect.github.com/pallets/jinja/issues/2070">#2070</a>)</li>
<li><a
href="247de5e0c5"><code>247de5e</code></a>
use global contributing guide</li>
<li><a
href="ab8218c7a1"><code>ab8218c</code></a>
use project advisory link instead of global</li>
<li><a
href="b4ffc8ff29"><code>b4ffc8f</code></a>
release version 3.1.5 (<a
href="https://redirect.github.com/pallets/jinja/issues/2066">#2066</a>)</li>
<li>See full diff in <a
href="https://github.com/pallets/jinja/compare/3.1.5...3.1.6">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/element-hq/synapse/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [pyo3-log](https://github.com/vorner/pyo3-log) from 0.12.1 to
0.12.2.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/vorner/pyo3-log/blob/main/CHANGELOG.md">pyo3-log's
changelog</a>.</em></p>
<blockquote>
<h1>0.12.2</h1>
<ul>
<li>Allow pyo3 0.24.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="99ee890b2b"><code>99ee890</code></a>
Release 0.12.2</li>
<li><a
href="d1a27f574f"><code>d1a27f5</code></a>
Merge pull request <a
href="https://redirect.github.com/vorner/pyo3-log/issues/61">#61</a>
from gi0baro/pyo3-024</li>
<li><a
href="66fd9498c3"><code>66fd949</code></a>
Allow PyO3 0.24</li>
<li>See full diff in <a
href="https://github.com/vorner/pyo3-log/compare/v0.12.1...v0.12.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps
[actions/download-artifact](https://github.com/actions/download-artifact)
from 4.2.0 to 4.2.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/download-artifact/releases">actions/download-artifact's
releases</a>.</em></p>
<blockquote>
<h2>v4.2.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Add unit tests by <a
href="https://github.com/GhadimiR"><code>@GhadimiR</code></a> in <a
href="https://redirect.github.com/actions/download-artifact/pull/392">actions/download-artifact#392</a></li>
<li>Fix bug introduced in 4.2.0 by <a
href="https://github.com/GhadimiR"><code>@GhadimiR</code></a> in <a
href="https://redirect.github.com/actions/download-artifact/pull/391">actions/download-artifact#391</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/download-artifact/compare/v4.2.0...v4.2.1">https://github.com/actions/download-artifact/compare/v4.2.0...v4.2.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="95815c38cf"><code>95815c3</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/download-artifact/issues/391">#391</a>
from GhadimiR/main</li>
<li><a
href="278fca438a"><code>278fca4</code></a>
Move log statements</li>
<li><a
href="68909842a1"><code>6890984</code></a>
Merge branch 'main' into main</li>
<li><a
href="f9415c0ec3"><code>f9415c0</code></a>
Run unit tests in CI</li>
<li><a
href="76a6eb5cbc"><code>76a6eb5</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/download-artifact/issues/392">#392</a>
from GhadimiR/add_unit_tests</li>
<li><a
href="a2426d7c45"><code>a2426d7</code></a>
Merge branch 'main' into add_unit_tests</li>
<li><a
href="3ffa694f6f"><code>3ffa694</code></a>
lint</li>
<li><a
href="53f6aa5f93"><code>53f6aa5</code></a>
Add extra assertion to download single artifact test</li>
<li><a
href="b456700053"><code>b456700</code></a>
lint</li>
<li><a
href="9eab798a98"><code>9eab798</code></a>
Configure tsconfig</li>
<li>Additional commits viewable in <a
href="b14cf4c926...95815c38cf">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps
[dawidd6/action-download-artifact](https://github.com/dawidd6/action-download-artifact)
from 8 to 9.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dawidd6/action-download-artifact/releases">dawidd6/action-download-artifact's
releases</a>.</em></p>
<blockquote>
<h2>v9</h2>
<h2>What's Changed</h2>
<ul>
<li>add merge_multiple option by <a
href="https://github.com/timostroehlein"><code>@timostroehlein</code></a>
in <a
href="https://redirect.github.com/dawidd6/action-download-artifact/pull/327">dawidd6/action-download-artifact#327</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a
href="https://github.com/timostroehlein"><code>@timostroehlein</code></a>
made their first contribution in <a
href="https://redirect.github.com/dawidd6/action-download-artifact/pull/327">dawidd6/action-download-artifact#327</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/dawidd6/action-download-artifact/compare/v8...v9">https://github.com/dawidd6/action-download-artifact/compare/v8...v9</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="07ab29fd4a"><code>07ab29f</code></a>
add merge_multiple option (<a
href="https://redirect.github.com/dawidd6/action-download-artifact/issues/327">#327</a>)</li>
<li>See full diff in <a
href="20319c5641...07ab29fd4a">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [actions/cache](https://github.com/actions/cache) from 4.2.2 to
4.2.3.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/cache/releases">actions/cache's
releases</a>.</em></p>
<blockquote>
<h2>v4.2.3</h2>
<h2>What's Changed</h2>
<ul>
<li>Update to use <code>@actions/cache</code> 4.0.3 package &
prepare for new release by <a
href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1577">actions/cache#1577</a>
(SAS tokens for cache entries are now masked in debug logs)</li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a>
made their first contribution in <a
href="https://redirect.github.com/actions/cache/pull/1577">actions/cache#1577</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/cache/compare/v4.2.2...v4.2.3">https://github.com/actions/cache/compare/v4.2.2...v4.2.3</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/actions/cache/blob/main/RELEASES.md">actions/cache's
changelog</a>.</em></p>
<blockquote>
<h1>Releases</h1>
<h3>4.2.3</h3>
<ul>
<li>Bump <code>@actions/cache</code> to v4.0.3 (obfuscates SAS token in
debug logs for cache entries)</li>
</ul>
<h3>4.2.2</h3>
<ul>
<li>Bump <code>@actions/cache</code> to v4.0.2</li>
</ul>
<h3>4.2.1</h3>
<ul>
<li>Bump <code>@actions/cache</code> to v4.0.1</li>
</ul>
<h3>4.2.0</h3>
<p>TLDR; The cache backend service has been rewritten from the ground up
for improved performance and reliability. <a
href="https://github.com/actions/cache">actions/cache</a> now integrates
with the new cache service (v2) APIs.</p>
<p>The new service will gradually roll out as of <strong>February 1st,
2025</strong>. The legacy service will also be sunset on the same date.
Changes in these release are <strong>fully backward
compatible</strong>.</p>
<p><strong>We are deprecating some versions of this action</strong>. We
recommend upgrading to version <code>v4</code> or <code>v3</code> as
soon as possible before <strong>February 1st, 2025.</strong> (Upgrade
instructions below).</p>
<p>If you are using pinned SHAs, please use the SHAs of versions
<code>v4.2.0</code> or <code>v3.4.0</code></p>
<p>If you do not upgrade, all workflow runs using any of the deprecated
<a href="https://github.com/actions/cache">actions/cache</a> will
fail.</p>
<p>Upgrading to the recommended versions will not break your
workflows.</p>
<h3>4.1.2</h3>
<ul>
<li>Add GitHub Enterprise Cloud instances hostname filters to inform API
endpoint choices - <a
href="https://redirect.github.com/actions/cache/pull/1474">#1474</a></li>
<li>Security fix: Bump braces from 3.0.2 to 3.0.3 - <a
href="https://redirect.github.com/actions/cache/pull/1475">#1475</a></li>
</ul>
<h3>4.1.1</h3>
<ul>
<li>Restore original behavior of <code>cache-hit</code> output - <a
href="https://redirect.github.com/actions/cache/pull/1467">#1467</a></li>
</ul>
<h3>4.1.0</h3>
<ul>
<li>Ensure <code>cache-hit</code> output is set when a cache is missed -
<a
href="https://redirect.github.com/actions/cache/pull/1404">#1404</a></li>
<li>Deprecate <code>save-always</code> input - <a
href="https://redirect.github.com/actions/cache/pull/1452">#1452</a></li>
</ul>
<h3>4.0.2</h3>
<ul>
<li>Fixed restore <code>fail-on-cache-miss</code> not working.</li>
</ul>
<h3>4.0.1</h3>
<ul>
<li>Updated <code>isGhes</code> check</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="5a3ec84eff"><code>5a3ec84</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/cache/issues/1577">#1577</a>
from salmanmkc/salmanmkc/4-test</li>
<li><a
href="7de21022a7"><code>7de2102</code></a>
Update releases.md</li>
<li><a
href="76d40dd347"><code>76d40dd</code></a>
Update to use the latest version of the cache package to obfuscate the
SAS</li>
<li><a
href="76dd5eb692"><code>76dd5eb</code></a>
update cache with main</li>
<li><a
href="8c80c27c5e"><code>8c80c27</code></a>
new package</li>
<li><a
href="45cfd0e7ff"><code>45cfd0e</code></a>
updates</li>
<li><a
href="edd449b9cf"><code>edd449b</code></a>
updated cache with latest changes</li>
<li><a
href="0576707e37"><code>0576707</code></a>
latest test before pr</li>
<li><a
href="3105dc9754"><code>3105dc9</code></a>
update</li>
<li><a
href="9450d42d15"><code>9450d42</code></a>
mask</li>
<li>Additional commits viewable in <a
href="d4323d4df1...5a3ec84eff">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This PR makes a few radical changes to media. This now stores the SHA256
hash of each file stored in the database (excluding thumbnails, more on
that later). If a set of media is quarantined, any additional uploads of
the same file contents or any other files with the same hash will be
quarantined at the same time.
Currently this does NOT:
- De-duplicate media, although a future extension could be to do that.
- Run any background jobs to identify the hashes of older files. This
could also be a future extension, though the value of doing so is
limited to combat the abuse of recent media.
- Hash thumbnails. It's assumed that thumbnails are parented to some
form of media, so you'd likely be wanting to quarantine the media and
the thumbnail at the same time.
This background DB delta removes the old state group deletion background
update from the `background_updates` table if it exists.
The `delete_unreferenced_state_groups_bg_update` update should only
exist in that table if a homeserver ran v1.126.0rc1/v1.126.0rc2, and
rolled back or forward to any other version of Synapse before letting
the update finish.
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
This PR fixes#18154 to avoid de-deltaing state groups which resulted in
DB size temporarily increasing until the DB was `VACUUM`'ed. As a
result, less state groups will get deleted now.
It also attempts to improve performance by not duplicating work when
processing state groups it has already processed in previous iterations.
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Erik Johnston <erikj@element.io>
After the [recent supply chain attack](https://www.wiz.io/blog/new-github-action-supply-chain-attack-reviewdog-action-setup)
in `tj-actions/changed-files` and actions based on it, it's become clear
that relying on git tags to pin our dependencies is not enough (as tags
can simply be replaced). Therefore we need to switch to hashes.
Dependabot should continue to update these dependencies for us.
Best reviewed commit-by-commit. Though if CI passes, we're *probably*
fine.
To address a performance problem due to the foreign key on the same
column.
cc @erikjohnston
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
I got rid of the `SYNAPSE_USE_FROZEN_DICTS` environment variable because
it will be overridden by the Synapse worker apps anyway and if we want
to support `SYNAPSE_USE_FROZEN_DICTS`, it should be in
`synapse/config/server.py`. It's also not documented so I'm assuming no
one is using it anyway.
Spawning from looking at the frozen dict stuff during the review of
https://github.com/element-hq/synapse/pull/18103#discussion_r1935876168
We do a few things in this PR to better support caching:
1. Change `Cache-Control` header to allow intermediary proxies to cache
media *only* if they revalidate on every request. This means that the
intermediary cache will still send the request to Synapse but with a
`If-None-Match` header, at which point Synapse can check auth and
respond with a 304 and empty content.
2. Add `ETag` response header to all media responses. We hardcode this
to `1` since all media is immutable (beyond being deleted).
3. Check for `If-None-Match` header (after checking for auth), and if it
matches then respond with a 304 and empty body.
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.96 to 1.0.97.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/anyhow/releases">anyhow's
releases</a>.</em></p>
<blockquote>
<h2>1.0.97</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="bfb89ef244"><code>bfb89ef</code></a>
Release 1.0.97</li>
<li><a
href="c7fca9b086"><code>c7fca9b</code></a>
Ignore elidable_lifetime_names pedantic clippy lint</li>
<li><a
href="427c0bb0f3"><code>427c0bb</code></a>
Point standard library links to stable</li>
<li>See full diff in <a
href="https://github.com/dtolnay/anyhow/compare/1.0.96...1.0.97">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Revert "Add background job to clear unreferenced state groups (#18154)"
This mechanism is suspected of inserting large numbers of rows into
`state_groups_state`,
thus unreasonably increasing disk usage.
See: https://github.com/element-hq/synapse/issues/18217
This reverts commit 5121f9210c989fcc909e78195133876dff3bc9b9 (#18154).
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
The context for this is that the Matrix spec allows basically anything
in the device ID. With MSC3861, we're restricting this to strings that
can be represented as scopes.
Whilst this works well for next-gen auth sessions, compatibility/legacy
sessions still can have characters that can't be encoded (mainly spaces)
in them.
To work around that, we added in MAS a behaviour where the device_id is
given as an explicit property of the token introspection response, and
remove it from the scope.
Because we don't expect users to rollout new Synapse and MAS versions in
sync, we needed a way to 'advertise' support for this behaviour: the
easiest way to do that was through an extra header in the introspection
response.
On the longer term, I expect MAS and Synapse to move away from the
introspection endpoint, and instead define a specific API for Synapse ->
MAS communication.
PR on the MAS side:
https://github.com/element-hq/matrix-authentication-service/pull/4067
Allows overriding the `redirect_uri` parameter sent to both the
authorization and token endpoints of the IdP. Typically this parameter
is hardcoded to `<public_baseurl>/_synapse/client/oidc/callback`.
Yet it can be useful in certain contexts to allow a different callback
URL. For instance, if you would like to intercept the authorization code
returned from the IdP and do something with it, before eventually
calling Synapse's OIDC callback URL yourself.
This change enables enterprise use cases but does not change the default
behaviour.
---
Best reviewed commit-by-commit.
---------
Co-authored-by: Eric Eastwood <erice@element.io>
Bumps [pyo3-log](https://github.com/vorner/pyo3-log) from 0.12.0 to
0.12.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/vorner/pyo3-log/blob/main/CHANGELOG.md">pyo3-log's
changelog</a>.</em></p>
<blockquote>
<h1>0.12.1</h1>
<ul>
<li>Pass-through exceptions (<a
href="https://redirect.github.com/vorner/pyo3-log/issues/57">#57</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="835647f0ba"><code>835647f</code></a>
Release 0.12.1</li>
<li><a
href="5765e3f10d"><code>5765e3f</code></a>
Stop swallowing exceptions (<a
href="https://redirect.github.com/vorner/pyo3-log/issues/58">#58</a>)</li>
<li>See full diff in <a
href="https://github.com/vorner/pyo3-log/compare/v0.12.0...v0.12.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
> **Note**
> Automatic rebases have been disabled on this pull request as it has
been open for over 30 days.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Devon Hudson <devon.dmytro@gmail.com>
Co-authored-by: Devon Hudson <devonhudson@librem.one>
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.217 to
1.0.218.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.218</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="7bfd518dd4"><code>7bfd518</code></a>
Release 1.0.218</li>
<li><a
href="723a9491e2"><code>723a949</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2895">#2895</a>
from dtolnay/stabledoc</li>
<li><a
href="2b44efb085"><code>2b44efb</code></a>
Point standard library links to stable</li>
<li><a
href="03dc0fc137"><code>03dc0fc</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2894">#2894</a>
from dtolnay/doclink</li>
<li><a
href="85cb0c478e"><code>85cb0c4</code></a>
Convert html links to intra-doc links</li>
<li><a
href="abe7194480"><code>abe7194</code></a>
Update ui test suite to nightly-2025-02-12</li>
<li><a
href="aaccac7413"><code>aaccac7</code></a>
Unset doc-scrape-examples for lib target</li>
<li><a
href="7cd4d84cac"><code>7cd4d84</code></a>
Update ui test suite to nightly-2025-02-07</li>
<li><a
href="04ff3e8f95"><code>04ff3e8</code></a>
More precise gitignore patterns</li>
<li><a
href="dc3031b614"><code>dc3031b</code></a>
Remove *.sw[po] from gitignore</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/serde/compare/v1.0.217...v1.0.218">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.95 to 1.0.96.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/anyhow/releases">anyhow's
releases</a>.</em></p>
<blockquote>
<h2>1.0.96</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f0aa0d367f"><code>f0aa0d3</code></a>
Release 1.0.96</li>
<li><a
href="bc33c24bd2"><code>bc33c24</code></a>
Convert html links to intra-doc links</li>
<li><a
href="1cff785c76"><code>1cff785</code></a>
Unset doc-scrape-examples for lib target</li>
<li><a
href="d71c806e97"><code>d71c806</code></a>
More precise gitignore patterns</li>
<li><a
href="3e409755ce"><code>3e40975</code></a>
Remove **/*.rs.bk from project-specific gitignore</li>
<li><a
href="b880dd050e"><code>b880dd0</code></a>
Ignore Cargo-generated tests/crate/target directory</li>
<li><a
href="8891ce34b4"><code>8891ce3</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/404">#404</a>
from dtolnay/missingabi</li>
<li><a
href="51a173ee68"><code>51a173e</code></a>
Ignore missing_abi lint in nightly-2025-01-16</li>
<li><a
href="4d71a84097"><code>4d71a84</code></a>
Ignore double_ended_iterator_last clippy lint</li>
<li><a
href="af0937ef72"><code>af0937e</code></a>
Update ui test suite to nightly-2025-01-02</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/anyhow/compare/1.0.95...1.0.96">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [click](https://github.com/pallets/click) from 8.1.7 to 8.1.8.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/pallets/click/releases">click's
releases</a>.</em></p>
<blockquote>
<h2>8.1.8</h2>
<p>This is the Click 8.1.8 fix release, which fixes bugs but does not
otherwise change behavior and should not result in breaking changes
compared to the latest feature release.</p>
<p>PyPI: <a
href="https://pypi.org/project/click/8.1.8/">https://pypi.org/project/click/8.1.8/</a>
Changes: <a
href="https://click.palletsprojects.com/en/stable/changes/#version-8-1-8">https://click.palletsprojects.com/en/stable/changes/#version-8-1-8</a>
Milestone <a
href="https://github.com/pallets/click/milestones/23?closed=1">https://github.com/pallets/click/milestones/23?closed=1</a></p>
<ul>
<li>Fix an issue with type hints for <code>click.open_file()</code>. <a
href="https://redirect.github.com/pallets/click/issues/2717">#2717</a></li>
<li>Fix issue where error message for invalid <code>click.Path</code>
displays on
multiple lines. <a
href="https://redirect.github.com/pallets/click/issues/2697">#2697</a></li>
<li>Fixed issue that prevented a default value of
<code>""</code> from being displayed in
the help for an option. <a
href="https://redirect.github.com/pallets/click/issues/2500">#2500</a></li>
<li>The test runner handles stripping color consistently on Windows. <a
href="https://redirect.github.com/pallets/click/issues/2705">#2705</a></li>
<li>Show correct value for flag default when using
<code>default_map</code>. <a
href="https://redirect.github.com/pallets/click/issues/2632">#2632</a></li>
<li>Fix <code>click.echo(color=...)</code> passing <code>color</code> to
coloroma so it can be
forced on Windows. <a
href="https://redirect.github.com/pallets/click/issues/2606">#2606</a>.</li>
<li>More robust bash version check, fixing problem on Windows with
git-bash. <a
href="https://redirect.github.com/pallets/click/issues/2638">#2638</a></li>
<li>Cache the help option generated by the
<code>help_option_names</code> setting to
respect its eagerness. <a
href="https://redirect.github.com/pallets/click/issues/2811">#2811</a></li>
<li>Replace uses of <code>os.system</code> with
<code>subprocess.Popen</code>. <a
href="https://redirect.github.com/pallets/click/issues/1476">#1476</a></li>
<li>Exceptions generated during a command will use the context's
<code>color</code>
setting when being displayed. <a
href="https://redirect.github.com/pallets/click/issues/2193">#2193</a></li>
<li>Error message when defining option with invalid name is more
descriptive. <a
href="https://redirect.github.com/pallets/click/issues/2452">#2452</a></li>
<li>Refactor code generating default <code>--help</code> option to
deduplicate code. <a
href="https://redirect.github.com/pallets/click/issues/2563">#2563</a></li>
<li>Test <code>CLIRunner</code> resets patched
<code>_compat.should_strip_ansi</code>. <a
href="https://redirect.github.com/pallets/click/issues/2732">#2732</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pallets/click/blob/main/CHANGES.rst">click's
changelog</a>.</em></p>
<blockquote>
<h2>Version 8.1.8</h2>
<p>Unreleased</p>
<ul>
<li>Fix an issue with type hints for <code>click.open_file()</code>.
:issue:<code>2717</code></li>
<li>Fix issue where error message for invalid <code>click.Path</code>
displays on
multiple lines. :issue:<code>2697</code></li>
<li>Fixed issue that prevented a default value of
<code>""</code> from being displayed in
the help for an option. :issue:<code>2500</code></li>
<li>The test runner handles stripping color consistently on Windows.
:issue:<code>2705</code></li>
<li>Show correct value for flag default when using
<code>default_map</code>.
:issue:<code>2632</code></li>
<li>Fix <code>click.echo(color=...)</code> passing <code>color</code> to
coloroma so it can be
forced on Windows. :issue:<code>2606</code>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="934813e4d4"><code>934813e</code></a>
release version 8.1.8</li>
<li><a
href="c23223b13c"><code>c23223b</code></a>
Add links to third-party projects enhancing Click (<a
href="https://redirect.github.com/pallets/click/issues/2815">#2815</a>)</li>
<li><a
href="822d4fd0bc"><code>822d4fd</code></a>
Add links to third-party projects</li>
<li><a
href="8e7bed0466"><code>8e7bed0</code></a>
Break up arguments section (<a
href="https://redirect.github.com/pallets/click/issues/2586">#2586</a>)</li>
<li><a
href="3241541fc8"><code>3241541</code></a>
Remove some typing hints.</li>
<li><a
href="bed037717d"><code>bed0377</code></a>
remove test pypi</li>
<li><a
href="653459007a"><code>6534590</code></a>
update dev dependencies</li>
<li><a
href="b1e392e69b"><code>b1e392e</code></a>
fix typos</li>
<li><a
href="fdc6b02046"><code>fdc6b02</code></a>
Fix missing reset in isolation function (<a
href="https://redirect.github.com/pallets/click/issues/2733">#2733</a>)</li>
<li><a
href="ffd43e9dc3"><code>ffd43e9</code></a>
Fixed missing reset on _compat.should_strip_ansi.</li>
<li>Additional commits viewable in <a
href="https://github.com/pallets/click/compare/8.1.7...8.1.8">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [authlib](https://github.com/lepture/authlib) from 1.4.0 to 1.4.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lepture/authlib/releases">authlib's
releases</a>.</em></p>
<blockquote>
<h2>Version 1.4.1</h2>
<ul>
<li>Improve garbage collection on OAuth clients. <a
href="https://redirect.github.com/lepture/authlib/issues/698">#698</a></li>
<li>Fix client parameters for httpx. <a
href="https://redirect.github.com/lepture/authlib/issues/694">#694</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/lepture/authlib/blob/main/docs/changelog.rst">authlib's
changelog</a>.</em></p>
<blockquote>
<h2>Version 1.4.1</h2>
<p><strong>Released on Jan 28, 2025</strong></p>
<ul>
<li>Improve garbage collection on OAuth clients.
:issue:<code>698</code></li>
<li>Fix client parameters for httpx. :issue:<code>694</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="0e8f480e9c"><code>0e8f480</code></a>
chore: release 1.4.1</li>
<li><a
href="c46e939c38"><code>c46e939</code></a>
fix(client): improve garbage collection for oauth clients</li>
<li><a
href="9188e21283"><code>9188e21</code></a>
fix(httpx): remove compact code for httpx</li>
<li><a
href="c7e2d9f76f"><code>c7e2d9f</code></a>
fix(httpx): update test cases for httpx</li>
<li><a
href="ce1405dd14"><code>ce1405d</code></a>
fix: improve garbage collection via <a
href="https://redirect.github.com/lepture/authlib/issues/698">#698</a></li>
<li><a
href="532cce618b"><code>532cce6</code></a>
fix: update httpx client kwargs <a
href="https://redirect.github.com/lepture/authlib/issues/694">#694</a></li>
<li><a
href="fe12a57885"><code>fe12a57</code></a>
chore: update readme</li>
<li>See full diff in <a
href="https://github.com/lepture/authlib/compare/v1.4.0...v1.4.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.138 to
1.0.139.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.139</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="4d4f53c3b7"><code>4d4f53c</code></a>
Release 1.0.139</li>
<li><a
href="5d6b32f378"><code>5d6b32f</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1242">#1242</a>
from dtolnay/writefloat</li>
<li><a
href="e5bb8bd38f"><code>e5bb8bd</code></a>
Document behavior of write_f32/f64 on non-finite floats</li>
<li><a
href="7a797810d2"><code>7a79781</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1241">#1241</a>
from dtolnay/doclink</li>
<li><a
href="13591f1dd4"><code>13591f1</code></a>
Convert html links to intra-doc links</li>
<li><a
href="1d7378e8ee"><code>1d7378e</code></a>
Unset doc-scrape-examples for lib target</li>
<li><a
href="1174c5f57d"><code>1174c5f</code></a>
Resolve unnecessary_semicolon pedantic clippy lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.138...v1.0.139">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
MSC4108 relies on ETag to determine if something has changed on the
rendez-vous channel.
Strong and correct ETag comparison works if the response body is
bit-for-bit identical, which isn't the case if a proxy in the middle
compresses the response on the fly.
This adds a `no-transform` directive to the `Cache-Control` header,
which tells proxies not to transform the response body.
Additionally, some proxies (nginx) will switch to `Transfer-Encoding:
chunked` if it doesn't know the Content-Length of the response, and
'weakening' the ETag if that's the case. I've added `Content-Length`
headers to all responses, to hopefully solve that.
This basically fixes QR-code login when nginx or cloudflare is involved,
with gzip/zstd/deflate compression enabled.
Bumps [types-psycopg2](https://github.com/python/typeshed) from
2.9.21.20241019 to 2.9.21.20250121.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps
[sigstore/cosign-installer](https://github.com/sigstore/cosign-installer)
from 3.8.0 to 3.8.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/sigstore/cosign-installer/releases">sigstore/cosign-installer's
releases</a>.</em></p>
<blockquote>
<h2>v3.8.1</h2>
<h2>What's Changed</h2>
<ul>
<li>use cosign 2.4.3 and other updates by <a
href="https://github.com/cpanato"><code>@cpanato</code></a> in <a
href="https://redirect.github.com/sigstore/cosign-installer/pull/182">sigstore/cosign-installer#182</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/sigstore/cosign-installer/compare/v3...v3.8.1">https://github.com/sigstore/cosign-installer/compare/v3...v3.8.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d7d6bc7722"><code>d7d6bc7</code></a>
use cosign 2.4.3 and other updates (<a
href="https://redirect.github.com/sigstore/cosign-installer/issues/182">#182</a>)</li>
<li>See full diff in <a
href="https://github.com/sigstore/cosign-installer/compare/v3.8.0...v3.8.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Normally, when `discovery` is enabled,
`id_token_signing_alg_values_supported` comes from the OpenID Discovery
Document (`/.well-known/openid-configuration`). If nothing was
specified, we default to supporting `RS256` in the downstream usage.
This PR just adds support for adding a default/overriding the the
discovered value [just like we do for other things like the
`token_endpoint`](1525a3b4d4/docs/usage/configuration/config_documentation.md (oidc_providers)),
etc.
This is a split off #18033
This uses a few tricks to speed up the building of docker images:
- This switches to use `uv pip install` instead of `pip install`. This
saves a bunch of time, especially when cross-compiling
- I then looked at what packages were not using binary wheels: I
upgraded MarkupSafe to have binaries for py3.12, and got back to Python
3.12 because hiredis didn't have builds for py3.13 with the version we
were using
- The generation of the requirements.txt is arch-agnostic, so I've
switched this one to run on the build architecture, so that both arch
can share it
- The download of runtime depdendencies can be done on the build
architecture through manual `apt-get download` plus `dpkg --extract`
- We were using -slim images, but still installed a bunch of -dev
dependencies. Turns out, all the dev dependencies were already installed
in the non-slim image, which saves a bunch of time as well
This has been a problem with Element Web, as it will proble /register
with an empty body, which gave this error:
```
curl -d '{}' -HContent-Type:application/json /_matrix/client/v3/register
{"errcode": "M_UNKNOWN",
"error": "Invalid username"}
```
And Element Web would choke on it. This changes that so we reply
instead:
```
{"errcode": "M_FORBIDDEN",
"error": "Registration has been disabled. Only m.login.application_service registrations are allowed."}
```
Also adds a test for this.
See https://github.com/element-hq/element-web/issues/27993
---------
Co-authored-by: Andrew Morgan <andrew@amorgan.xyz>
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by @github_username." or "Contributed by [Your Name]." to the end of the entry.
* [ ] [Code style](https://element-hq.github.io/synapse/latest/code_style.html) is correct
(run the [linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
* [ ] [Code style](https://element-hq.github.io/synapse/latest/code_style.html) is correct (run the [linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
- Add support for the [MSC4260 user report API](https://github.com/matrix-org/matrix-spec-proposals/pull/4260). ([\#18120](https://github.com/element-hq/synapse/issues/18120))
### Bugfixes
- Fix an issue where, during state resolution for v11 rooms, Synapse would incorrectly calculate the power level of the creator when there was no power levels event in the room. ([\#18534](https://github.com/element-hq/synapse/issues/18534), [\#18547](https://github.com/element-hq/synapse/issues/18547))
- Fix long-standing bug where sliding sync did not honour the `room_id_to_include` config option. ([\#18535](https://github.com/element-hq/synapse/issues/18535))
- Fix an issue where "Lock timeout is getting excessive" warnings would be logged even when the lock timeout was <10minutes.([\#18543](https://github.com/element-hq/synapse/issues/18543))
- Fix an issue where Synapse could calculate the wrong power level for the creator of the room if there was no power levels event. ([\#18545](https://github.com/element-hq/synapse/issues/18545))
### Improved Documentation
- Generate config documentation from JSON Schema file. ([\#18528](https://github.com/element-hq/synapse/issues/18528))
- Fix typo in user type documentation. ([\#18568](https://github.com/element-hq/synapse/issues/18568))
### Internal Changes
- Increase performance of introspecting access tokens when using delegated auth. ([\#18357](https://github.com/element-hq/synapse/issues/18357), [\#18561](https://github.com/element-hq/synapse/issues/18561))
- Log user deactivations. ([\#18541](https://github.com/element-hq/synapse/issues/18541))
- Enable [`flake8-logging`](https://docs.astral.sh/ruff/rules/#flake8-logging-log) and [`flake8-logging-format`](https://docs.astral.sh/ruff/rules/#flake8-logging-format-g) rules in Ruff and fix related issues throughout the codebase. ([\#18542](https://github.com/element-hq/synapse/issues/18542))
- Clean up old, unused rows from the `device_federation_inbox` table. ([\#18546](https://github.com/element-hq/synapse/issues/18546))
- Run config schema CI on develop and release branches. ([\#18551](https://github.com/element-hq/synapse/issues/18551))
- Add support for Twisted `25.5.0`+ releases. ([\#18577](https://github.com/element-hq/synapse/issues/18577))
- Update PyO3 to version 0.25. ([\#18578](https://github.com/element-hq/synapse/issues/18578))
### Updates to locked dependencies
* Bump actions/setup-python from 5.5.0 to 5.6.0. ([\#18555](https://github.com/element-hq/synapse/issues/18555))
* Bump base64 from 0.21.7 to 0.22.1. ([\#18559](https://github.com/element-hq/synapse/issues/18559))
* Bump dawidd6/action-download-artifact from 9 to 11. ([\#18556](https://github.com/element-hq/synapse/issues/18556))
* Bump headers from 0.4.0 to 0.4.1. ([\#18529](https://github.com/element-hq/synapse/issues/18529))
* Bump requests from 2.32.2 to 2.32.4. ([\#18533](https://github.com/element-hq/synapse/issues/18533))
* Bump types-requests from 2.32.0.20250328 to 2.32.4.20250611. ([\#18558](https://github.com/element-hq/synapse/issues/18558))
# Synapse 1.132.0 (2025-06-17)
### Improved Documentation
- Improvements to generate config documentation from JSON Schema file. ([\#18522](https://github.com/element-hq/synapse/issues/18522))
# Synapse 1.132.0rc1 (2025-06-10)
### Features
- Add support for [MSC4155](https://github.com/matrix-org/matrix-spec-proposals/pull/4155) Invite Filtering. ([\#18288](https://github.com/element-hq/synapse/issues/18288))
- Add experimental `user_may_send_state_event` module API callback. ([\#18455](https://github.com/element-hq/synapse/issues/18455))
- Add experimental `get_media_config_for_user` and `is_user_allowed_to_upload_media_of_size` module API callbacks that allow overriding of media repository maximum upload size. ([\#18457](https://github.com/element-hq/synapse/issues/18457))
- Add experimental `get_ratelimit_override_for_user` module API callback that allows overriding of per-user ratelimits. ([\#18458](https://github.com/element-hq/synapse/issues/18458))
- Support configuration of default and extra user types. ([\#18456](https://github.com/element-hq/synapse/issues/18456))
- Successful requests to `/_matrix/app/v1/ping` will now force Synapse to reattempt delivering transactions to appservices. ([\#18521](https://github.com/element-hq/synapse/issues/18521))
- Support the import of the `RatelimitOverride` type from `synapse.module_api` in modules and rename `messages_per_second` to `per_second`. ([\#18513](https://github.com/element-hq/synapse/issues/18513))
### Bugfixes
- Remove destinations from sending if not whitelisted. ([\#18484](https://github.com/element-hq/synapse/issues/18484))
- Fixed room summary API incorrectly returning that a room is private in the room summary response when the join rule is omitted by the remote server. Contributed by @nexy7574. ([\#18493](https://github.com/element-hq/synapse/issues/18493))
- Prevent users from adding themselves to their own user ignore list. ([\#18508](https://github.com/element-hq/synapse/issues/18508))
### Improved Documentation
- Generate config documentation from JSON Schema file. ([\#17892](https://github.com/element-hq/synapse/issues/17892))
- Mention `CAP_NET_BIND_SERVICE` as an alternative to running Synapse as root in order to bind to a privileged port. ([\#18408](https://github.com/element-hq/synapse/issues/18408))
- Surface hidden Admin API documentation regarding fetching of scheduled tasks. ([\#18516](https://github.com/element-hq/synapse/issues/18516))
- Mark the new module APIs in this release as experimental. ([\#18536](https://github.com/element-hq/synapse/issues/18536))
### Internal Changes
- Mark dehydrated devices in the [List All User Devices Admin API](https://element-hq.github.io/synapse/latest/admin_api/user_admin_api.html#list-all-devices). ([\#18252](https://github.com/element-hq/synapse/issues/18252))
- Reduce disk wastage by cleaning up `received_transactions` older than 1 day, rather than 30 days. ([\#18310](https://github.com/element-hq/synapse/issues/18310))
- Distinguish all vs local events being persisted in the "Event Send Time Quantiles" graph (Grafana). ([\#18510](https://github.com/element-hq/synapse/issues/18510))
# Synapse 1.131.0 (2025-06-03)
No significant changes since 1.131.0rc1.
# Synapse 1.131.0rc1 (2025-05-28)
### Features
- Add `msc4263_limit_key_queries_to_users_who_share_rooms` config option as per [MSC4263](https://github.com/matrix-org/matrix-spec-proposals/pull/4263). ([\#18180](https://github.com/element-hq/synapse/issues/18180))
- Add option to allow registrations that begin with `_`. Contributed by `_` (@hex5f). ([\#18262](https://github.com/element-hq/synapse/issues/18262))
- Include room ID in response to the [Room Deletion Status Admin API](https://element-hq.github.io/synapse/latest/admin_api/rooms.html#status-of-deleting-rooms). ([\#18318](https://github.com/element-hq/synapse/issues/18318))
- Add support for calling Policy Servers ([MSC4284](https://github.com/matrix-org/matrix-spec-proposals/pull/4284)) to mark events as spam. ([\#18387](https://github.com/element-hq/synapse/issues/18387))
### Bugfixes
- Prevent race-condition in `_maybe_retry_device_resync` entrance. ([\#18391](https://github.com/element-hq/synapse/issues/18391))
- Fix the `tests.handlers.test_worker_lock.WorkerLockTestCase.test_lock_contention` test which could spuriously time out on RISC-V architectures due to performance differences. ([\#18430](https://github.com/element-hq/synapse/issues/18430))
- Fix admin redaction endpoint not redacting encrypted messages. ([\#18434](https://github.com/element-hq/synapse/issues/18434))
### Improved Documentation
- Update `room_list_publication_rules` docs to consider defaults that changed in v1.126.0. Contributed by @HarHarLinks. ([\#18286](https://github.com/element-hq/synapse/issues/18286))
- Add advice for upgrading between major PostgreSQL versions to the database documentation. ([\#18445](https://github.com/element-hq/synapse/issues/18445))
### Internal Changes
- Fix a memory leak in `_NotifierUserStream`. ([\#18380](https://github.com/element-hq/synapse/issues/18380))
- Fix a couple type annotations in the `RootConfig`/`Config`. ([\#18409](https://github.com/element-hq/synapse/issues/18409))
- Explicitly enable PyPy builds in `cibuildwheel`s config to avoid it being disabled on a future upgrade to `cibuildwheel` v3. ([\#18417](https://github.com/element-hq/synapse/issues/18417))
- Update the PR review template to remove an erroneous line break from the final bullet point. ([\#18419](https://github.com/element-hq/synapse/issues/18419))
- Explain why we `flush_buffer()` for Python `print(...)` output. ([\#18420](https://github.com/element-hq/synapse/issues/18420))
- Add lint to ensure we don't add a `CREATE/DROP INDEX` in a schema delta. ([\#18440](https://github.com/element-hq/synapse/issues/18440))
- Allow checking only for the existence of a field in an SSO provider's response, rather than requiring the value(s) to check. ([\#18454](https://github.com/element-hq/synapse/issues/18454))
- Add unit tests for homeserver usage statistics. ([\#18463](https://github.com/element-hq/synapse/issues/18463))
- Don't move invited users to new room when shutting down room. ([\#18471](https://github.com/element-hq/synapse/issues/18471))
### Updates to locked dependencies
* Bump actions/setup-python from 5.5.0 to 5.6.0. ([\#18398](https://github.com/element-hq/synapse/issues/18398))
* Bump authlib from 1.5.1 to 1.5.2. ([\#18452](https://github.com/element-hq/synapse/issues/18452))
* Bump docker/build-push-action from 6.15.0 to 6.17.0. ([\#18397](https://github.com/element-hq/synapse/issues/18397), [\#18449](https://github.com/element-hq/synapse/issues/18449))
* Bump lxml from 5.3.0 to 5.4.0. ([\#18480](https://github.com/element-hq/synapse/issues/18480))
* Bump mypy-zope from 1.0.9 to 1.0.11. ([\#18428](https://github.com/element-hq/synapse/issues/18428))
* Bump pyo3 from 0.23.5 to 0.24.2. ([\#18460](https://github.com/element-hq/synapse/issues/18460))
* Bump pyo3-log from 0.12.3 to 0.12.4. ([\#18453](https://github.com/element-hq/synapse/issues/18453))
* Bump pyopenssl from 25.0.0 to 25.1.0. ([\#18450](https://github.com/element-hq/synapse/issues/18450))
* Bump ruff from 0.7.3 to 0.11.11. ([\#18451](https://github.com/element-hq/synapse/issues/18451), [\#18482](https://github.com/element-hq/synapse/issues/18482))
* Bump tornado from 6.4.2 to 6.5.0. ([\#18459](https://github.com/element-hq/synapse/issues/18459))
* Bump setuptools from 72.1.0 to 78.1.1. ([\#18461](https://github.com/element-hq/synapse/issues/18461))
* Bump types-jsonschema from 4.23.0.20241208 to 4.23.0.20250516. ([\#18481](https://github.com/element-hq/synapse/issues/18481))
* Bump types-requests from 2.32.0.20241016 to 2.32.0.20250328. ([\#18427](https://github.com/element-hq/synapse/issues/18427))
# Synapse 1.130.0 (2025-05-20)
### Bugfixes
- Fix startup being blocked on creating a new index that was introduced in v1.130.0rc1. ([\#18439](https://github.com/element-hq/synapse/issues/18439))
- Fix the ordering of local messages in rooms that were affected by [GHSA-v56r-hwv5-mxg6](https://github.com/advisories/GHSA-v56r-hwv5-mxg6). ([\#18447](https://github.com/element-hq/synapse/issues/18447))
# Synapse 1.130.0rc1 (2025-05-13)
### Features
- Add an Admin API endpoint `GET /_synapse/admin/v1/scheduled_tasks` to fetch scheduled tasks. ([\#18214](https://github.com/element-hq/synapse/issues/18214))
- Add config option `user_directory.exclude_remote_users` which, when enabled, excludes remote users from user directory search results. ([\#18300](https://github.com/element-hq/synapse/issues/18300))
- Add support for handling `GET /devices/` on workers. ([\#18355](https://github.com/element-hq/synapse/issues/18355))
### Bugfixes
- Fix a longstanding bug where Synapse would immediately retry a failing push endpoint when a new event is received, ignoring any backoff timers. ([\#18363](https://github.com/element-hq/synapse/issues/18363))
- Pass leave from remote invite rejection down Sliding Sync. ([\#18375](https://github.com/element-hq/synapse/issues/18375))
### Updates to the Docker image
- In `configure_workers_and_start.py`, use the same absolute path of Python in the interpreter shebang, and invoke child Python processes with `sys.executable`. ([\#18291](https://github.com/element-hq/synapse/issues/18291))
- Optimize the build of the workers image. ([\#18292](https://github.com/element-hq/synapse/issues/18292))
- In `start_for_complement.sh`, replace some external program calls with shell builtins. ([\#18293](https://github.com/element-hq/synapse/issues/18293))
- When generating container scripts from templates, don't add a leading newline so that their shebangs may be handled correctly. ([\#18295](https://github.com/element-hq/synapse/issues/18295))
### Improved Documentation
- Improve formatting of the README file. ([\#18218](https://github.com/element-hq/synapse/issues/18218))
- Add documentation for configuring [Pocket ID](https://github.com/pocket-id/pocket-id) as an OIDC provider. ([\#18237](https://github.com/element-hq/synapse/issues/18237))
- Fix typo in docs about the `push` config option. Contributed by @HarHarLinks. ([\#18320](https://github.com/element-hq/synapse/issues/18320))
- Add `/_matrix/federation/v1/version` to list of federation endpoints that can be handled by workers. ([\#18377](https://github.com/element-hq/synapse/issues/18377))
- Add an Admin API endpoint `GET /_synapse/admin/v1/scheduled_tasks` to fetch scheduled tasks. ([\#18384](https://github.com/element-hq/synapse/issues/18384))
### Internal Changes
- Return specific error code when adding an email address / phone number to account is not supported ([MSC4178](https://github.com/matrix-org/matrix-spec-proposals/pull/4178)). ([\#17578](https://github.com/element-hq/synapse/issues/17578))
- Stop auto-provisionning missing users & devices when delegating auth to Matrix Authentication Service. Requires MAS 0.13.0 or later. ([\#18181](https://github.com/element-hq/synapse/issues/18181))
- Apply file hashing and existing quarantines to media downloaded for URL previews. ([\#18297](https://github.com/element-hq/synapse/issues/18297))
- Allow a few admin APIs used by matrix-authentication-service to run on workers. ([\#18313](https://github.com/element-hq/synapse/issues/18313))
- Apply `should_drop_federated_event` to federation invites. ([\#18330](https://github.com/element-hq/synapse/issues/18330))
- Allow `/rooms/` admin API to be run on workers. ([\#18360](https://github.com/element-hq/synapse/issues/18360))
- Minor performance improvements to the notifier. ([\#18367](https://github.com/element-hq/synapse/issues/18367))
- Slight performance increase when using the ratelimiter. ([\#18369](https://github.com/element-hq/synapse/issues/18369))
- Don't validate the `at_hash` (access token hash) field in OIDC ID Tokens if we don't end up actually using the OIDC Access Token. ([\#18374](https://github.com/element-hq/synapse/issues/18374), [\#18385](https://github.com/element-hq/synapse/issues/18385))
- Fixed test failures when using authlib 1.5.2. ([\#18390](https://github.com/element-hq/synapse/issues/18390))
- Refactor [MSC4186](https://github.com/matrix-org/matrix-spec-proposals/pull/4186) Simplified Sliding Sync room list tests to cover both new and fallback logic paths. ([\#18399](https://github.com/element-hq/synapse/issues/18399))
### Updates to locked dependencies
* Bump actions/add-to-project from 280af8ae1f83a494cfad2cb10f02f6d13529caa9 to 5b1a254a3546aef88e0a7724a77a623fa2e47c36. ([\#18365](https://github.com/element-hq/synapse/issues/18365))
* Bump actions/download-artifact from 4.2.1 to 4.3.0. ([\#18364](https://github.com/element-hq/synapse/issues/18364))
* Bump actions/setup-go from 5.4.0 to 5.5.0. ([\#18426](https://github.com/element-hq/synapse/issues/18426))
* Bump anyhow from 1.0.97 to 1.0.98. ([\#18336](https://github.com/element-hq/synapse/issues/18336))
* Bump packaging from 24.2 to 25.0. ([\#18393](https://github.com/element-hq/synapse/issues/18393))
* Bump pillow from 11.1.0 to 11.2.1. ([\#18429](https://github.com/element-hq/synapse/issues/18429))
* Bump pydantic from 2.10.3 to 2.11.4. ([\#18394](https://github.com/element-hq/synapse/issues/18394))
* Bump pyo3-log from 0.12.2 to 0.12.3. ([\#18317](https://github.com/element-hq/synapse/issues/18317))
* Bump pyopenssl from 24.3.0 to 25.0.0. ([\#18315](https://github.com/element-hq/synapse/issues/18315))
* Bump sha2 from 0.10.8 to 0.10.9. ([\#18395](https://github.com/element-hq/synapse/issues/18395))
* Bump sigstore/cosign-installer from 3.8.1 to 3.8.2. ([\#18366](https://github.com/element-hq/synapse/issues/18366))
* Bump softprops/action-gh-release from 1 to 2. ([\#18264](https://github.com/element-hq/synapse/issues/18264))
* Bump stefanzweifel/git-auto-commit-action from 5.1.0 to 5.2.0. ([\#18354](https://github.com/element-hq/synapse/issues/18354))
* Bump txredisapi from 1.4.10 to 1.4.11. ([\#18392](https://github.com/element-hq/synapse/issues/18392))
* Bump types-jsonschema from 4.23.0.20240813 to 4.23.0.20241208. ([\#18305](https://github.com/element-hq/synapse/issues/18305))
* Bump types-psycopg2 from 2.9.21.20250121 to 2.9.21.20250318. ([\#18316](https://github.com/element-hq/synapse/issues/18316))
# Synapse 1.129.0 (2025-05-06)
No significant changes since 1.129.0rc2.
# Synapse 1.129.0rc2 (2025-04-30)
Synapse 1.129.0rc1 was never formally released due to regressions discovered during the release process. 1.129.0rc2 fixes those regressions by reverting the affected PRs.
### Internal Changes
- Revert the slow background update introduced by [\#18068](https://github.com/element-hq/synapse/issues/18068) in v1.128.0. ([\#18372](https://github.com/element-hq/synapse/issues/18372))
- Revert "Add total event, unencrypted message, and e2ee event counts to stats reporting", added in v1.129.0rc1. ([\#18373](https://github.com/element-hq/synapse/issues/18373))
# Synapse 1.129.0rc1 (2025-04-15)
### Features
- Add `passthrough_authorization_parameters` in OIDC configuration to allow passing parameters to the authorization grant URL. ([\#18232](https://github.com/element-hq/synapse/issues/18232))
- Add `total_event_count`, `total_message_count`, and `total_e2ee_event_count` fields to the homeserver usage statistics. ([\#18260](https://github.com/element-hq/synapse/issues/18260))
### Bugfixes
- Fix `force_tracing_for_users` config when using delegated auth. ([\#18334](https://github.com/element-hq/synapse/issues/18334))
- Fix the token introspection cache logging access tokens when MAS integration is in use. ([\#18335](https://github.com/element-hq/synapse/issues/18335))
- Stop caching introspection failures when delegating auth to MAS. ([\#18339](https://github.com/element-hq/synapse/issues/18339))
- Fix `ExternalIDReuse` exception after migrating to MAS on workers with a high traffic. ([\#18342](https://github.com/element-hq/synapse/issues/18342))
- Fix minor performance regression caused by tracking of room participation. Regressed in v1.128.0. ([\#18345](https://github.com/element-hq/synapse/issues/18345))
### Updates to the Docker image
- Optimize the build of the complement-synapse image. ([\#18294](https://github.com/element-hq/synapse/issues/18294))
### Internal Changes
- Disable statement timeout during room purge. ([\#18133](https://github.com/element-hq/synapse/issues/18133))
- Add cache to storage functions used to auth requests when using delegated auth. ([\#18337](https://github.com/element-hq/synapse/issues/18337))
# Synapse 1.128.0 (2025-04-08)
No significant changes since 1.128.0rc1.
# Synapse 1.128.0rc1 (2025-04-01)
### Features
- Add an access token introspection cache to make Matrix Authentication Service integration ([MSC3861](https://github.com/matrix-org/matrix-doc/pull/3861)) more efficient. ([\#18231](https://github.com/element-hq/synapse/issues/18231))
- Add background job to clear unreferenced state groups. ([\#18254](https://github.com/element-hq/synapse/issues/18254))
- Hashes of media files are now tracked by Synapse. Media quarantines will now apply to all files with the same hash. ([\#18277](https://github.com/element-hq/synapse/issues/18277), [\#18302](https://github.com/element-hq/synapse/issues/18302), [\#18296](https://github.com/element-hq/synapse/issues/18296))
### Bugfixes
- Add index to sliding sync ([MSC4186](https://github.com/matrix-org/matrix-doc/pull/4186)) membership snapshot table, to fix a performance issue. ([\#18074](https://github.com/element-hq/synapse/issues/18074))
### Updates to the Docker image
- Specify the architecture of installed packages via an APT config option, which is more reliable than appending package names with `:{arch}`. ([\#18271](https://github.com/element-hq/synapse/issues/18271))
- Always specify base image debian versions with a build argument. ([\#18272](https://github.com/element-hq/synapse/issues/18272))
- Allow passing arguments to `start_for_complement.sh` (to be sent to `configure_workers_and_start.py`). ([\#18273](https://github.com/element-hq/synapse/issues/18273))
- Make some improvements to the `prefix-log` script in the workers image. ([\#18274](https://github.com/element-hq/synapse/issues/18274))
- Use `uv pip` to install `supervisor` in the worker image. ([\#18275](https://github.com/element-hq/synapse/issues/18275))
- Avoid needing to download & use `rsync` in a build layer. ([\#18287](https://github.com/element-hq/synapse/issues/18287))
### Improved Documentation
- Fix how to obtain access token and change naming from riot to element ([\#18225](https://github.com/element-hq/synapse/issues/18225))
- Correct a small typo in the SSO mapping providers documentation. ([\#18276](https://github.com/element-hq/synapse/issues/18276))
- Add docs for how to clear out the Poetry wheel cache. ([\#18283](https://github.com/element-hq/synapse/issues/18283))
### Internal Changes
- Add a column `participant` to `room_memberships` table. ([\#18068](https://github.com/element-hq/synapse/issues/18068))
- Update Poetry to 2.1.1, including updating the lock file version. ([\#18251](https://github.com/element-hq/synapse/issues/18251))
- Pin GitHub Actions dependencies by commit hash. ([\#18255](https://github.com/element-hq/synapse/issues/18255))
- Add DB delta to remove the old state group deletion job. ([\#18284](https://github.com/element-hq/synapse/issues/18284))
### Updates to locked dependencies
* Bump actions/add-to-project from f5473ace9aeee8b97717b281e26980aa5097023f to 280af8ae1f83a494cfad2cb10f02f6d13529caa9. ([\#18303](https://github.com/element-hq/synapse/issues/18303))
* Bump actions/cache from 4.2.2 to 4.2.3. ([\#18266](https://github.com/element-hq/synapse/issues/18266))
* Bump actions/download-artifact from 4.2.0 to 4.2.1. ([\#18268](https://github.com/element-hq/synapse/issues/18268))
* Bump actions/setup-python from 5.4.0 to 5.5.0. ([\#18298](https://github.com/element-hq/synapse/issues/18298))
* Bump actions/upload-artifact from 4.6.1 to 4.6.2. ([\#18304](https://github.com/element-hq/synapse/issues/18304))
* Bump authlib from 1.4.1 to 1.5.1. ([\#18306](https://github.com/element-hq/synapse/issues/18306))
* Bump dawidd6/action-download-artifact from 8 to 9. ([\#18204](https://github.com/element-hq/synapse/issues/18204))
* Bump jinja2 from 3.1.5 to 3.1.6. ([\#18223](https://github.com/element-hq/synapse/issues/18223))
* Bump log from 0.4.26 to 0.4.27. ([\#18267](https://github.com/element-hq/synapse/issues/18267))
* Bump phonenumbers from 8.13.50 to 9.0.2. ([\#18299](https://github.com/element-hq/synapse/issues/18299))
* Bump pygithub from 2.5.0 to 2.6.1. ([\#18243](https://github.com/element-hq/synapse/issues/18243))
* Bump pyo3-log from 0.12.1 to 0.12.2. ([\#18269](https://github.com/element-hq/synapse/issues/18269))
# Synapse 1.127.1 (2025-03-26)
## Security
- Fix [CVE-2025-30355](https://www.cve.org/CVERecord?id=CVE-2025-30355) / [GHSA-v56r-hwv5-mxg6](https://github.com/element-hq/synapse/security/advisories/GHSA-v56r-hwv5-mxg6). **High severity vulnerability affecting federation. The vulnerability has been exploited in the wild.**
# Synapse 1.127.0 (2025-03-25)
No significant changes since 1.127.0rc1.
# Synapse 1.127.0rc1 (2025-03-18)
### Features
- Update [MSC4140](https://github.com/matrix-org/matrix-spec-proposals/pull/4140) implementation to no longer cancel a user's own delayed state events with an event type & state key that match a more recent state event sent by that user. ([\#17810](https://github.com/element-hq/synapse/issues/17810))
### Improved Documentation
- Fixed a minor typo in the Synapse documentation. Contributed by @karuto12. ([\#18224](https://github.com/element-hq/synapse/issues/18224))
- Fix detection of workflow failures in the release script. ([\#18211](https://github.com/element-hq/synapse/issues/18211))
- Add caching support to media endpoints. ([\#18235](https://github.com/element-hq/synapse/issues/18235))
### Updates to locked dependencies
* Bump anyhow from 1.0.96 to 1.0.97. ([\#18201](https://github.com/element-hq/synapse/issues/18201))
* Bump bcrypt from 4.2.1 to 4.3.0. ([\#18207](https://github.com/element-hq/synapse/issues/18207))
* Bump bytes from 1.10.0 to 1.10.1. ([\#18227](https://github.com/element-hq/synapse/issues/18227))
* Bump http from 1.2.0 to 1.3.1. ([\#18245](https://github.com/element-hq/synapse/issues/18245))
* Bump sentry-sdk from 2.19.2 to 2.22.0. ([\#18205](https://github.com/element-hq/synapse/issues/18205))
* Bump serde from 1.0.218 to 1.0.219. ([\#18228](https://github.com/element-hq/synapse/issues/18228))
* Bump serde_json from 1.0.139 to 1.0.140. ([\#18202](https://github.com/element-hq/synapse/issues/18202))
* Bump ulid from 1.2.0 to 1.2.1. ([\#18246](https://github.com/element-hq/synapse/issues/18246))
# Synapse 1.126.0 (2025-03-11)
Administrators using the Debian/Ubuntu packages from `packages.matrix.org`, please check
[the relevant section in the upgrade notes](https://github.com/element-hq/synapse/blob/release-v1.126/docs/upgrade.md#change-of-signing-key-expiry-date-for-the-debianubuntu-package-repository)
as we have recently updated the expiry date on the repository's GPG signing key. The old version of the key will expire on `2025-03-15`.
No significant changes since 1.126.0rc3.
# Synapse 1.126.0rc3 (2025-03-07)
### Bugfixes
- Revert the background job to clear unreferenced state groups (that was introduced in v1.126.0rc1), due to [a suspected issue](https://github.com/element-hq/synapse/issues/18217) that causes increased disk usage. ([\#18222](https://github.com/element-hq/synapse/issues/18222))
# Synapse 1.126.0rc2 (2025-03-05)
### Internal Changes
- Fix wheel building configuration in CI by installing libatomic1. ([\#18212](https://github.com/element-hq/synapse/issues/18212), [\#18213](https://github.com/element-hq/synapse/issues/18213))
# Synapse 1.126.0rc1 (2025-03-04)
Synapse 1.126.0rc1 was not fully released due to an error in CI.
### Features
- Define ratelimit configuration for delayed event management. ([\#18019](https://github.com/element-hq/synapse/issues/18019))
- Add the `--no-secrets-in-config` command line option. ([\#18092](https://github.com/element-hq/synapse/issues/18092))
- Add background job to clear unreferenced state groups. ([\#18154](https://github.com/element-hq/synapse/issues/18154))
- Add support for specifying/overriding `id_token_signing_alg_values_supported` for an OpenID identity provider. ([\#18177](https://github.com/element-hq/synapse/issues/18177))
- Add support for specifying/overriding `redirect_uri` in the authorization and token requests against an OpenID identity provider. ([\#18197](https://github.com/element-hq/synapse/issues/18197))
### Bugfixes
- Make sure we advertise registration as disabled when [MSC3861](https://github.com/matrix-org/matrix-spec-proposals/pull/3861) is enabled. ([\#17661](https://github.com/element-hq/synapse/issues/17661))
- Prevent suspended users from sending encrypted messages. ([\#18157](https://github.com/element-hq/synapse/issues/18157))
- Cleanup deleted state group references. ([\#18165](https://github.com/element-hq/synapse/issues/18165))
- Fix [MSC4108 QR-code login](https://github.com/matrix-org/matrix-spec-proposals/pull/4108) not working with some reverse-proxy setups. ([\#18178](https://github.com/element-hq/synapse/issues/18178))
- Support device IDs that can't be represented in a scope when delegating auth to Matrix Authentication Service 0.15.0+. ([\#18174](https://github.com/element-hq/synapse/issues/18174))
### Updates to the Docker image
- Speed up the building of the Docker image. ([\#18038](https://github.com/element-hq/synapse/issues/18038))
### Improved Documentation
- Move incorrectly placed version indicator in User Event Redaction Admin API docs. ([\#18152](https://github.com/element-hq/synapse/issues/18152))
@ -253,15 +253,17 @@ Alongside all that, join our developer community on Matrix:
Copyright and Licensing
=======================
Copyright 2014-2017 OpenMarket Ltd
Copyright 2017 Vector Creations Ltd
Copyright 2017-2025 New Vector Ltd
| Copyright 2014-2017 OpenMarket Ltd
| Copyright 2017 Vector Creations Ltd
| Copyright 2017-2025 New Vector Ltd
|
This software is dual-licensed by New Vector Ltd (Element). It can be used either:
(1) for free under the terms of the GNU Affero General Public License (as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version); OR
(2) under the terms of a paid-for Element Commercial License agreement between you and Element (the terms of which may vary depending on what you and Element have agreed to).
Unless required by applicable law or agreed to in writing, software distributed under the Licenses is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the Licenses for the specific language governing permissions and limitations under the Licenses.
Ensure policy servers are not asked to scan policy server change events, allowing rooms to disable the use of a policy server while the policy server is down.
This API returns information about scheduled tasks.
To use it, you will need to authenticate by providing an `access_token`
for a server admin: see [Admin API](../usage/administration/admin_api/).
The api is:
```
GET /_synapse/admin/v1/scheduled_tasks
```
It returns a JSON body like the following:
```json
{
"scheduled_tasks": [
{
"id": "GSA124oegf1",
"action": "shutdown_room",
"status": "complete",
"timestamp_ms": 23423523,
"resource_id": "!roomid",
"result": "some result",
"error": null
}
]
}
```
**Query parameters:**
* `action_name`: string - Is optional. Returns only the scheduled tasks with the given action name.
* `resource_id`: string - Is optional. Returns only the scheduled tasks with the given resource id.
* `status`: string - Is optional. Returns only the scheduled tasks matching the given status, one of
- "scheduled" - Task is scheduled but not active
- "active" - Task is active and probably running, and if not will be run on next scheduler loop run
- "complete" - Task has completed successfully
- "failed" - Task is over and either returned a failed status, or had an exception
* `max_timestamp`: int - Is optional. Returns only the scheduled tasks with a timestamp inferior to the specified one.
**Response**
The following fields are returned in the JSON response body along with a `200` HTTP status code:
* `id`: string - ID of scheduled task.
* `action`: string - The name of the scheduled task's action.
* `status`: string - The status of the scheduled task.
* `timestamp_ms`: integer - The timestamp (in milliseconds since the unix epoch) of the given task - If the status is "scheduled" then this represents when it should be launched.
Otherwise it represents the last time this task got a change of state.
* `resource_id`: Optional string - The resource id of the scheduled task, if it possesses one
* `result`: Optional Json - Any result of the scheduled task, if given
* `error`: Optional string - If the task has the status "failed", the error associated with this failure
@ -414,6 +415,32 @@ The following actions are **NOT** performed. The list may be incomplete.
- Remove from monthly active users
- Remove user's consent information (consent version and timestamp)
## Suspend/Unsuspend Account
This API allows an admin to suspend/unsuspend an account. While an account is suspended, the user is
prohibited from sending invites, joining or knocking on rooms, sending messages, changing profile data, and redacting messages other than their own.
The api is:
```
PUT /_synapse/admin/v1/suspend/<user_id>
```
with a body of:
```json
{
"suspend": true
}
```
To unsuspend a user, use the same endpoint with a body of:
```json
{
"suspend": false
}
```
## Reset password
**Note:** This API is disabled when MSC3861 is enabled. [See #15582](https://github.com/matrix-org/synapse/pull/15582)
@ -928,7 +955,8 @@ A response body like the following is returned:
"last_seen_ip": "1.2.3.4",
"last_seen_user_agent": "Mozilla/5.0 (X11; Linux x86_64; rv:103.0) Gecko/20100101 Firefox/103.0",
"last_seen_ts": 1474491775024,
"user_id": "<user_id>"
"user_id": "<user_id>",
"dehydrated": false
},
{
"device_id": "AUIECTSRND",
@ -936,7 +964,8 @@ A response body like the following is returned:
"last_seen_ip": "1.2.3.5",
"last_seen_user_agent": "Mozilla/5.0 (X11; Linux x86_64; rv:103.0) Gecko/20100101 Firefox/103.0",
"last_seen_ts": 1474491775025,
"user_id": "<user_id>"
"user_id": "<user_id>",
"dehydrated": false
}
],
"total": 2
@ -966,6 +995,7 @@ The following fields are returned in the JSON response body:
- `last_seen_ts` - The timestamp (in milliseconds since the unix epoch) when this
devices was last seen. (May be a few minutes out of date, for efficiency reasons).
- `user_id` - Owner of device.
- `dehydrated` - Whether the device is a dehydrated device.
- `total` - Total number of user's devices.
@ -1468,13 +1498,13 @@ The following JSON body parameter must be provided:
- `rooms` - A list of rooms to redact the user's events in. If an empty list is provided all events in all rooms
the user is a member of will be redacted
_Added in Synapse 1.116.0._
The following JSON body parameters are optional:
- `reason` - Reason the redaction is being requested, ie "spam", "abuse", etc. This will be included in each redaction event, and be visible to users.
- `limit` - a limit on the number of the user's events to search for ones that can be redacted (events are redacted newest to oldest) in each room, defaults to 1000 if not provided
Called when processing an invitation received over federation. Unlike `user_may_invite`,
this callback receives the entire event, including any stripped state in the `unsigned`
section, not just the room and user IDs.
The callback must return one of:
- `synapse.module_api.NOT_SPAM`, to allow the operation. Other callbacks may still
decide to reject it.
- `synapse.module_api.errors.Codes` to reject the operation with an error code. In case
of doubt, `synapse.module_api.errors.Codes.FORBIDDEN` is a good error code.
If multiple modules implement this callback, they will be considered in order. If a
callback returns `synapse.module_api.NOT_SPAM`, Synapse falls through to the next one.
The value of the first callback that does not return `synapse.module_api.NOT_SPAM` will
be used. If this happens, Synapse will not call any of the subsequent implementations of
this callback.
If all of the callbacks return `synapse.module_api.NOT_SPAM`, Synapse will also fall
through to the `user_may_invite` callback before approving the invite.
### `user_may_send_3pid_invite`
_First introduced in Synapse v1.45.0_
@ -159,12 +189,19 @@ _First introduced in Synapse v1.37.0_
_Changed in Synapse v1.62.0: `synapse.module_api.NOT_SPAM` and `synapse.module_api.errors.Codes` can be returned by this callback. Returning a boolean is now deprecated._
_Changed in Synapse v1.132.0: Added the `room_config` argument. Callbacks that only expect a single `user_id` argument are still supported._
* `user_id`: The Matrix user ID of the user (e.g. `@alice:example.com`).
* `room_config`: The contents of the body of a [/createRoom request](https://spec.matrix.org/latest/client-server-api/#post_matrixclientv3createroom) as a dictionary.
The callback must return one of:
- `synapse.module_api.NOT_SPAM`, to allow the operation. Other callbacks may still
decide to reject it.
@ -239,6 +276,41 @@ be used. If this happens, Synapse will not call any of the subsequent implementa
Caution: This callback is currently experimental . The method signature or behaviour
may change without notice.
</span>**
Called when processing a request to [send state events](https://spec.matrix.org/latest/client-server-api/#put_matrixclientv3roomsroomidstateeventtypestatekey) to a room.
The arguments passed to this callback are:
* `user_id`: The Matrix user ID of the user (e.g. `@alice:example.com`) sending the state event.
* `room_id`: The ID of the room that the requested state event is being sent to.
* `event_type`: The requested type of event.
* `state_key`: The requested state key.
* `content`: The requested event contents.
The callback must return one of:
- `synapse.module_api.NOT_SPAM`, to allow the operation. Other callbacks may still
decide to reject it.
- `synapse.module_api.errors.Codes` to reject the operation with an error code. In case
of doubt, `synapse.module_api.errors.Codes.FORBIDDEN` is a good error code.
If multiple modules implement this callback, they will be considered in order. If a
callback returns `synapse.module_api.NOT_SPAM`, Synapse falls through to the next one.
The value of the first callback that does not return `synapse.module_api.NOT_SPAM` will
be used. If this happens, Synapse will not call any of the subsequent implementations of
this callback.
### `check_username_for_spam`
@ -353,6 +425,8 @@ callback returns `False`, Synapse falls through to the next one. The value of th
callback that does not return `False` will be used. If this happens, Synapse will not call
any of the subsequent implementations of this callback.
Note that this check is applied to federation invites as of Synapse v1.130.0.
Postgres uses separate directories for database locations between major versions (typically `/var/lib/postgresql/<version>/main`).
Therefore, it is recommended to stop Synapse and other services (MAS, etc) before upgrading Postgres major versions.
It is also strongly recommended to [back up](./usage/administration/backups.md#database) your database beforehand to ensure no data loss arising from a failed upgrade.
## Backups
Don't forget to [back up](./usage/administration/backups.md#database) your database!
*Note*: You may need to set `PYTHONMALLOC=malloc` to ensure that `jemalloc` can accurately calculate memory usage. By default, Python uses its internal small-object allocator, which may interfere with jemalloc's ability to track memory consumption correctly. This could prevent the [cache_autotuning](../configuration/config_documentation.md#caches-and-associated-values) feature from functioning as expected, as the Python allocator may not reach the memory threshold set by `max_cache_memory_usage`, thus not triggering the cache eviction process.
*Note*: You may need to set `PYTHONMALLOC=malloc` to ensure that `jemalloc` can accurately calculate memory usage. By default, Python uses its internal small-object allocator, which may interfere with jemalloc's ability to track memory consumption correctly. This could prevent the [cache_autotuning](../configuration/config_documentation.md#caches) feature from functioning as expected, as the Python allocator may not reach the memory threshold set by `max_cache_memory_usage`, thus not triggering the cache eviction process.
This made a significant difference on Python 2.7 - it's unclear how
@ -30,7 +30,7 @@ The following statistics are sent to the configured reporting endpoint:
| `python_version` | string | The Python version number in use (e.g "3.7.1"). Taken from `sys.version_info`. |
| `total_users` | int | The number of registered users on the homeserver. |
| `total_nonbridged_users` | int | The number of users, excluding those created by an Application Service. |
| `daily_user_type_native` | int | The number of native users created in the last 24 hours. |
| `daily_user_type_native` | int | The number of native, non-guest users created in the last 24 hours. |
| `daily_user_type_guest` | int | The number of guest users created in the last 24 hours. |
| `daily_user_type_bridged` | int | The number of users created by Application Services in the last 24 hours. |
| `total_room_count` | int | The total number of rooms present on the homeserver. |
@ -50,8 +50,8 @@ The following statistics are sent to the configured reporting endpoint:
| `cache_factor` | int | The configured [`global factor`](../../configuration/config_documentation.md#caching) value for caching. |
| `event_cache_size` | int | The configured [`event_cache_size`](../../configuration/config_documentation.md#caching) value for caching. |
| `database_engine` | string | The database engine that is in use. Either "psycopg2" meaning PostgreSQL is in use, or "sqlite3" for SQLite3. |
| `database_server_version` | string | The version of the database server. Examples being "10.10" for PostgreSQL server version 10.0, and "3.38.5" for SQLite 3.38.5 installed on the system. |
| `log_level` | string | The log level in use. Examples are "INFO", "WARNING", "ERROR", "DEBUG", etc. |
| `database_server_version`| string | The version of the database server. Examples being "10.10" for PostgreSQL server version 10.0, and "3.38.5" for SQLite 3.38.5 installed on the system. |
| `log_level`| string | The log level in use. Examples are "INFO", "WARNING", "ERROR", "DEBUG", etc. |
[^1]: Native matrix users and guests are always counted. If the
"description":"Human-readable type of a schema that is displayed instead of the standard JSON Schema types like `object` or `integer`. In case the JSON Schema type contains `null`, this information should be presented alongside the human-readable type name.",
"examples":["duration","byte size"]
},
"io.element.post_description":{
"type":"string",
"description":"Additional description of a schema, better suited to be placed less prominently in the generated documentation, e.g., at the end of a section after listings of items and properties.",
"examples":[
"### Advanced uses\n\nThe spent coffee grounds can be added to compost for improving soil and growing plants."
"description":("Configuration settings related to push notifications."),
},
"encryption_enabled_by_default_for_room_type":{
"title":"Rooms",
"description":("Config options relating to rooms."),
},
"opentracing":{
"title":"Opentracing",
"description":("Configuration options related to Opentracing support."),
},
"worker_replication_secret":{
"title":"Coordinating workers",
"description":(
"Configuration options related to workers which belong in the main config file (usually called `homeserver.yaml`). A Synapse deployment can scale horizontally by running multiple Synapse processes called _workers_. Incoming requests are distributed between workers to handle higher loads. Some workers are privileged and can accept requests from other workers.\n\n"
"As a result, the worker configuration is divided into two parts.\n\n"
"1. The first part (in this section of the manual) defines which shardable tasks are delegated to privileged workers. This allows unprivileged workers to make requests to a privileged worker to act on their behalf.\n"
"2. [The second part](#individual-worker-configuration) controls the behaviour of individual workers in isolation.\n\n"
"For guidance on setting up workers, see the [worker documentation](../../workers.md)."
),
},
"worker_app":{
"title":"Individual worker configuration",
"description":(
"These options configure an individual worker, in its worker configuration file. They should be not be provided when configuring the main process.\n\n"
"Note also the configuration above for [coordinating a cluster of workers](#coordinating-workers).\n\n"
"For guidance on setting up workers, see the [worker documentation](../../workers.md)."
),
},
"background_updates":{
"title":"Background Updates",
"description":("Configuration settings related to background updates."),
},
"auto_accept_invites":{
"title":"Auto Accept Invites",
"description":(
"Configuration settings related to automatically accepting invites."
),
},
}
INDENT=""
has_error=False
deferror(text:str)->None:
globalhas_error
print(f"ERROR: {text}",file=sys.stderr)
has_error=True
defindent(text:str,first_line:bool=True)->str:
"""Indents each non-empty line of the given text."""
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
