This can be reviewed commit by commit
There are a few improvements over the experimental support:
- authorisation of Synapse <-> MAS requests is simplified, with a single
shared secret, removing the need for provisioning a client on the MAS
side
- the tests actually spawn a real server, allowing us to test the rust
introspection layer
- we now check that the device advertised in introspection actually
exist, making it so that when a user logs out, the tokens are
immediately invalidated, even if the cache doesn't expire
- it doesn't rely on discovery anymore, rather on a static endpoint
base. This means users don't have to override the introspection endpoint
to avoid internet roundtrips
- it doesn't depend on `authlib` anymore, as we simplified a lot the
calls done from Synapse to MAS
We still have to update the MAS documentation about the Synapse setup,
but that can be done later.
---------
Co-authored-by: reivilibre <oliverw@element.io>
Default values will be 1 room per minute, with a burst count of 10.
It's hard to imagine most users will be affected by this default rate,
but it's intentionally non-invasive in case of bots or other users that
need to create rooms at a large rate.
Server admins might want to down-tune this on their deployments.
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
The main goal of this PR is to handle device list changes onto multiple
writers, off the main process, so that we can have logins happening
whilst Synapse is rolling-restarting.
This is quite an intrusive change, so I would advise to review this
commit by commit; I tried to keep the history as clean as possible.
There are a few things to consider:
- the `device_list_key` in stream tokens becomes a
`MultiWriterStreamToken`, which has a few implications in sync and on
the storage layer
- we had a split between `DeviceHandler` and `DeviceWorkerHandler` for
master vs. worker process. I've kept this split, but making it rather
writer vs. non-writer worker, using method overrides for doing
replication calls when needed
- there are a few operations that need to happen on a single worker at a
time. Instead of using cross-worker locks, for now I made them run on
the first writer on the list
---------
Co-authored-by: Eric Eastwood <erice@element.io>
Another config option on my quest to a `*_path` variant for every
secret. Adds the config options `recaptcha_private_key_path` and
`recaptcha_public_key_path`. Tests and docs are included.
A public key is of course no secret, but it is closely related to the
private key, so it’s still useful to have a `*_path` variant for it.
You can now configure how much media can be uploaded by a user in a
given time period.
Note the first commit here is a refactor of create/upload content
function
This change adds a new configuration
`user_directory.exclude_remote_users`, which defaults to False.
When set to True, remote users will not appear in user directory search
results.
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Reverts element-hq/synapse#18260
It is causing a failure when building release debs for `debian:bullseye`
with the following error:
```
sqlite3.OperationalError: near "RETURNING": syntax error
```
# Add passthrough_authorization_parameters support to OIDC configuration
This PR adds `the passthrough_authorization_parameters` option to OIDC
configuration, allowing specific query parameters (like `login_hint`) to
be passed from the redirect endpoint to the authorization grant URL.
This enables clients to provide additional context to identity providers
during authentication flows.
# Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Quentin Gliech <quenting@element.io>
Allows overriding the `redirect_uri` parameter sent to both the
authorization and token endpoints of the IdP. Typically this parameter
is hardcoded to `<public_baseurl>/_synapse/client/oidc/callback`.
Yet it can be useful in certain contexts to allow a different callback
URL. For instance, if you would like to intercept the authorization code
returned from the IdP and do something with it, before eventually
calling Synapse's OIDC callback URL yourself.
This change enables enterprise use cases but does not change the default
behaviour.
---
Best reviewed commit-by-commit.
---------
Co-authored-by: Eric Eastwood <erice@element.io>
Normally, when `discovery` is enabled,
`id_token_signing_alg_values_supported` comes from the OpenID Discovery
Document (`/.well-known/openid-configuration`). If nothing was
specified, we default to supporting `RS256` in the downstream usage.
This PR just adds support for adding a default/overriding the the
discovered value [just like we do for other things like the
`token_endpoint`](1525a3b4d4/docs/usage/configuration/config_documentation.md (oidc_providers)),
etc.
Document consequences of replacing secrets. The covered config options
are `registration_shared_secret`, `macaroon_secret_key`, `form_secret`
and `worker_replication_secret`.
Even though I looked at the source code to check the added documentation
is right, I would appreciate additional verification of the statements
made.
In an hand-wavy attempt at classifying how bad the consequences of
secret replacement are, I added some explanations as warnings and others
as regular paragraphs.
Closes#17971
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
In the current `attribute_requirements` implementation it is only
possible to allow exact matching attribute values. Multiple allowed
values for one attribute are not possible as described in #13238.
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Sebastian Neuser <pzkz@infra.run>
Co-authored-by: Quentin Gliech <quenting@element.io>
The existing `email.smtp_host` config option is used for two distinct
purposes: it is resolved into the IP address to connect to, and used to
(request via SNI and) validate the server's certificate if TLS is
enabled. This new option allows specifying a different name for the
second purpose.
This is especially helpful, if `email.smtp_host` isn't a global FQDN,
but something that resolves only locally (e.g. "localhost" to connect
through the loopback interface, or some other internally routed name),
that one cannot get a valid certificate for.
Alternatives would of course be to specify a global FQDN as
`email.smtp_host`, or to disable TLS entirely, both of which might be
undesirable, depending on the SMTP server configuration.
Another config option on my quest to a `*_path` variant for every
secret. This time it’s `macaroon_secret_key_path`.
Reading secrets from files has the security advantage of separating the secrets from the config. It also simplifies secrets management in Kubernetes. Also useful to NixOS users.
Adds the option to load the Redis password from a file, instead of
giving it in the config directly. The code is similar to how it’s done
for `registration_shared_secret_path`. I changed the example in the
documentation to represent the best practice regarding the handling of
secrets.
Reading secrets from files has the security advantage of separating the
secrets from the config. It also simplifies secrets management in
Kubernetes.
Added a note in the documentation suggesting that users may set
`PYTHONMALLOC=malloc` when using `jemalloc`. This allows jemalloc to
track memory usage more accurately by bypassing Python's internal
small-object allocator (`pymalloc`), helping to ensure that
`cache_autotuning` functions as expected.
This doc change aims to provide more clarity for users configuring
jemalloc with Synapse.
Based on:
4ac783549c/synapse/metrics/jemalloc.py (L198-L201)
