testing: Add ikev2/mobike-virtual-ip-nat scenario

This tests moving from a public IP behind a NAT and back (with proper
changes of the UDP encapsulation).
This commit is contained in:
Tobias Brunner 2018-01-26 13:50:04 +01:00
parent 626e8a31d0
commit ad14f2084e
11 changed files with 213 additions and 0 deletions

View File

@ -0,0 +1,9 @@
The roadwarrior <b>alice</b> is sitting behind the NAT router <b>moon</b> but
at the outset of the scenariou is also directly connected to the 192.168.0.0/24 network
via an additional <b>eth1</b> interface. <b>alice</b> builds up a tunnel to gateway <b>sun</b>
in order to reach <b>bob</b> in the subnet behind. When the <b>eth1</b> interface
goes away, <b>alice</b> switches to <b>eth0</b> and signals the IP address change
via a MOBIKE ADDRESS_UPDATE notification to peer <b>sun</b>. Later the interface
comes back up again and because the best path is preferred (charon.prefer_best_path)
there is another switch to the directly connected path. <b>alice</b> sets
a virtual IP of 10.3.0.3, so that the IPsec policies don't have to be changed.

View File

@ -0,0 +1,31 @@
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*192.168.0.50.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*192.168.0.50::YES
alice::ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP SPIs::YES
sun:: ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP SPIs::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ifdown eth1::No output expected::NO
alice::sleep 1::No output expected::NO
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_ALICE.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*PH_IP_MOON::YES
alice::ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP in UDP SPIs::YES
sun:: ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP in UDP SPIs::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ifup eth1::No output expected::NO
alice::sleep 1::No output expected::NO
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*192.168.0.50.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*192.168.0.50::YES
alice::ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP SPIs::YES
sun:: ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP SPIs::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
sun::tcpdump::alice1.strongswan.org.*sun.strongswan.org: ESP.*seq=0x1::YES
sun::tcpdump::sun.strongswan.org.*alice1.strongswan.org: ESP.*seq=0x1::YES
moon::tcpdump::moon.strongswan.org.*sun.strongswan.org.*: ESP.*seq=0x2::YES
moon::tcpdump::sun.strongswan.org.*moon.strongswan.org.*: ESP.*seq=0x2::YES
bob::tcpdump::10.3.0.3.*bob.strongswan.org.*ICMP echo request::3
bob::tcpdump::bob.strongswan.org.*10.3.0.3.*ICMP echo reply::3

View File

@ -0,0 +1,19 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
leftsourceip=%config
leftcert=aliceCert.pem
leftid=alice@strongswan.org
right=PH_IP_SUN
rightid=@sun.strongswan.org
rightsubnet=10.2.0.0/16
auto=add

View File

@ -0,0 +1,42 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow traffic on lo as ifup/ifdown call bind's rndc which accesses TCP 953
-A OUTPUT -o lo -j ACCEPT
-A INPUT -i lo -j ACCEPT
# allow IPsec tunnel traffic
-A INPUT -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A OUTPUT -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A INPUT -i eth1 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth1 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT

View File

@ -0,0 +1,12 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
prefer_best_path = yes
syslog {
daemon {
knl = 2
}
}
}

View File

@ -0,0 +1,20 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=PH_IP_SUN
leftcert=sunCert.pem
leftid=@sun.strongswan.org
leftsubnet=10.2.0.0/16
right=%any
rightsourceip=10.3.0.3
rightid=alice@strongswan.org
auto=add

View File

@ -0,0 +1,32 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow IPsec tunnel traffic
-A FORWARD -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A FORWARD -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT

View File

@ -0,0 +1,11 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
syslog {
daemon {
knl = 2
}
}
}

View File

@ -0,0 +1,6 @@
alice::ipsec stop
sun::ipsec stop
alice::ifdown eth1
alice::iptables-restore < /etc/iptables.flush
sun::iptables-restore < /etc/iptables.flush
moon::iptables -t nat -F

View File

@ -0,0 +1,10 @@
alice::ifup eth1
alice::iptables-restore < /etc/iptables.rules
sun::iptables-restore < /etc/iptables.rules
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p udp -j SNAT --to-source PH_IP_MOON:1024-1100
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p tcp -j SNAT --to-source PH_IP_MOON:2000-2100
alice::ipsec start
sun::ipsec start
alice::expect-connection mobike
sun::expect-connection mobike
alice::ipsec up mobike

View File

@ -0,0 +1,21 @@
#!/bin/bash
#
# This configuration file provides information on the
# guest instances used for this test
# All guest instances that are required for this test
#
VIRTHOSTS="alice moon winnetou sun bob"
# Corresponding block diagram
#
DIAGRAM="a-m-w-s-b.png"
# Guest instances on which tcpdump is to be started
#
TCPDUMPHOSTS="bob moon sun"
# Guest instances on which IPsec is started
# Used for IPsec logging purposes
#
IPSECHOSTS="alice sun"