added ikev2/rw-eap-sim-only-radius scenario

testing/tests/ikev2/rw-eap-sim-only-radius/description.txt

@@ -0,0 +1,14 @@
+The roadwarrior <b>carol</b> sets up a connection to gateway <b>moon</b>.
+The gateway <b>moon</b> does not send an AUTH payload thus signalling
+a mutual <b>EAP-only</b> authentication.
+<b>carol</b> then uses the <i>Extensible Authentication Protocol</i>
+in association with a <i>GSM Subscriber Identity Module</i>
+(<b>EAP-SIM</b>) to authenticate against the gateway <b>moon</b>.
+In this scenario, triplets from the file <b>/etc/ipsec.d/triplets.dat</b>
+are used instead of a physical SIM card on the client <b>carol</b>.
+The gateway forwards all EAP messages to the RADIUS server <b>alice</b>
+which also uses a static triplets file.
+<p>
+The roadwarrior <b>dave</b> sends wrong EAP-SIM triplets. As a consequence
+the radius server <b>alice</b> returns an <b>Access-Reject</b> message
+and the gateway <b>moon</b> sends back an <b>EAP_FAILURE</b>. 	

testing/tests/ikev2/rw-eap-sim-only-radius/evaltest.dat

@@ -0,0 +1,15 @@
+carol::cat /var/log/daemon.log::server requested EAP_SIM authentication::YES
+carol::cat /var/log/daemon.log::allow mutual EAP-only authentication::YES
+carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES
+moon::cat /var/log/daemon.log::authentication of 'carol@strongswan.org' with EAP successful::YES
+moon::ipsec statusall::rw-eap.*ESTABLISHED.*carol@strongswan.org::YES
+carol::ipsec statusall::home.*ESTABLISHED::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
+moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
+moon::cat /var/log/daemon.log::received Access-Reject from RADIUS server::YES
+moon::cat /var/log/daemon.log::EAP method EAP_SIM failed for peer dave@strongswan.org::YES
+moon::ipsec statusall::rw-eap.*ESTABLISHED.*dave@strongswan.org::NO
+dave::cat /var/log/daemon.log::received EAP_FAILURE, EAP authentication failed::YES
+dave::ipsec statusall::home.*ESTABLISHED::NO
+dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::NO

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/clients.conf

@@ -0,0 +1,4 @@
+client PH_IP_MOON1 {
+  secret    = gv6URkSs 
+  shortname = moon
+}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/eap.conf

@@ -0,0 +1,5 @@
+eap {
+  default_eap_type = sim 
+  sim {
+  }
+}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/proxy.conf

@@ -0,0 +1,5 @@
+realm strongswan.org {
+  type     = radius
+  authhost = LOCAL
+  accthost = LOCAL
+}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/radiusd.conf

@@ -0,0 +1,123 @@
+# radiusd.conf	-- FreeRADIUS server configuration file.
+
+prefix = /usr
+exec_prefix = ${prefix}
+sysconfdir = /etc
+localstatedir = /var
+sbindir = ${exec_prefix}/sbin
+logdir = ${localstatedir}/log/radius
+raddbdir = ${sysconfdir}/raddb
+radacctdir = ${logdir}/radacct
+
+#  name of the running server.  See also the "-n" command-line option.
+name = radiusd
+
+#  Location of config and logfiles.
+confdir = ${raddbdir}
+run_dir = ${localstatedir}/run/radiusd
+
+# Should likely be ${localstatedir}/lib/radiusd
+db_dir = ${raddbdir}
+
+# libdir: Where to find the rlm_* modules.
+libdir = ${exec_prefix}/lib
+
+#  pidfile: Where to place the PID of the RADIUS server.
+pidfile = ${run_dir}/${name}.pid
+
+#  max_request_time: The maximum time (in seconds) to handle a request.
+max_request_time = 30
+
+#  cleanup_delay: The time to wait (in seconds) before cleaning up
+cleanup_delay = 5
+
+#  max_requests: The maximum number of requests which the server keeps
+max_requests = 1024
+
+#  listen: Make the server listen on a particular IP address, and send
+listen {
+  type = auth
+  ipaddr = PH_IP_ALICE 
+  port = 0
+}
+
+#  This second "listen" section is for listening on the accounting
+#  port, too.
+#
+listen {
+  type  = acct
+  ipaddr = PH_IP_ALICE 
+  port = 0
+}
+
+#  hostname_lookups: Log the names of clients or just their IP addresses
+hostname_lookups = no
+
+#  Core dumps are a bad thing.  This should only be set to 'yes'
+allow_core_dumps = no
+
+#  Regular expressions
+regular_expressions = yes
+extended_expressions = yes
+
+#  Logging section.  The various "log_*" configuration items
+log {
+  destination = files
+  file = ${logdir}/radius.log
+  syslog_facility = daemon
+  stripped_names = no
+  auth = yes 
+  auth_badpass = yes 
+  auth_goodpass = yes 
+}
+
+#  The program to execute to do concurrency checks.
+checkrad = ${sbindir}/checkrad
+
+#  Security considerations
+security {
+  max_attributes = 200
+  reject_delay = 1
+  status_server = yes
+}
+
+# PROXY CONFIGURATION
+proxy_requests = yes
+$INCLUDE proxy.conf
+
+# CLIENTS CONFIGURATION
+$INCLUDE clients.conf
+
+# THREAD POOL CONFIGURATION
+thread pool {
+  start_servers = 5
+  max_servers = 32
+  min_spare_servers = 3
+  max_spare_servers = 10
+  max_requests_per_server = 0
+}
+
+# MODULE CONFIGURATION
+modules {
+  $INCLUDE ${confdir}/modules/
+  $INCLUDE eap.conf
+  $INCLUDE sql.conf
+  $INCLUDE sql/mysql/counter.conf
+  sim_files {
+    simtriplets = "/etc/raddb/triplets.dat"
+  }
+}
+
+# Instantiation
+instantiate {
+  exec
+  expr
+  expiration
+  logintime
+}
+
+# Policies
+$INCLUDE policy.conf
+
+# Include all enabled virtual hosts
+$INCLUDE sites-enabled/

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/sites-available/default

@@ -0,0 +1,62 @@
+authorize {
+  preprocess
+  chap
+  mschap
+  sim_files
+  suffix
+  eap {
+    ok = return
+  }
+  unix
+  files
+  expiration
+  logintime
+  pap
+}
+
+authenticate {
+  Auth-Type PAP {
+    pap
+  }
+  Auth-Type CHAP {
+    chap
+  }
+  Auth-Type MS-CHAP {
+    mschap
+  }
+  unix
+  eap
+}
+
+preacct {
+  preprocess
+  acct_unique
+  suffix
+  files
+}
+
+accounting {
+  detail
+  unix
+  radutmp
+  attr_filter.accounting_response
+}
+
+session {
+  radutmp
+}
+
+post-auth {
+  exec
+  Post-Auth-Type REJECT {
+    attr_filter.access_reject
+  }
+}
+
+pre-proxy {
+}
+
+post-proxy {
+  eap
+}
+

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/triplets.dat

@@ -0,0 +1,7 @@
+carol@strongswan.org,30000000000000000000000000000000,30112233,305566778899AABB
+carol@strongswan.org,31000000000000000000000000000000,31112233,315566778899AABB
+carol@strongswan.org,32000000000000000000000000000000,32112233,325566778899AABB
+dave@strongswan.org,33000000000000000000000000000000,33112233,335566778899AABB
+dave@strongswan.org,34000000000000000000000000000000,34112233,345566778899AABB
+dave@strongswan.org,35000000000000000000000000000000,35112233,355566778899AABB
+

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/carol/etc/ipsec.conf

@@ -0,0 +1,21 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_CAROL
+	leftid=carol@strongswan.org
+	leftfirewall=yes
+	leftauth=eap
+	right=PH_IP_MOON
+	rightid=@moon.strongswan.org
+	rightsubnet=10.1.0.0/16
+	auto=add

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/carol/etc/ipsec.d/triplets.dat

@@ -0,0 +1,3 @@
+carol@strongswan.org,30000000000000000000000000000000,30112233,305566778899AABB
+carol@strongswan.org,31000000000000000000000000000000,31112233,315566778899AABB
+carol@strongswan.org,32000000000000000000000000000000,32112233,325566778899AABB

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/carol/etc/ipsec.secrets

@@ -0,0 +1 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/carol/etc/strongswan.conf

@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink fips-prf eap-sim eap-sim-file updown
+  send_vendor_id = yes
+}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/dave/etc/ipsec.conf

@@ -0,0 +1,21 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_DAVE
+	leftid=dave@strongswan.org
+	leftfirewall=yes
+	leftauth=eap
+	right=PH_IP_MOON
+	rightid=@moon.strongswan.org
+	rightsubnet=10.1.0.0/16
+	auto=add

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/dave/etc/ipsec.d/triplets.dat

@@ -0,0 +1,3 @@
+dave@strongswan.org,33000000000000000000000000000000,33112244,335566778899AABB
+dave@strongswan.org,34000000000000000000000000000000,34112244,345566778899AABB
+dave@strongswan.org,35000000000000000000000000000000,35112244,355566778899AABB

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/dave/etc/ipsec.secrets

@@ -0,0 +1 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/dave/etc/strongswan.conf

@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink fips-prf eap-sim eap-sim-file updown
+  send_vendor_id = yes
+}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/moon/etc/init.d/iptables

@@ -0,0 +1,84 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+opts="start stop reload"
+
+depend() {
+	before net
+	need logger
+}
+
+start() {
+	ebegin "Starting firewall"
+
+	# enable IP forwarding
+	echo 1 > /proc/sys/net/ipv4/ip_forward
+	
+	# default policy is DROP
+	/sbin/iptables -P INPUT DROP
+	/sbin/iptables -P OUTPUT DROP
+	/sbin/iptables -P FORWARD DROP
+
+	# allow esp
+	iptables -A INPUT  -i eth0 -p 50 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
+
+	# allow IKE
+	iptables -A INPUT  -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
+
+	# allow MobIKE
+	iptables -A INPUT  -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
+
+	# allow crl fetch from winnetou
+	iptables -A INPUT  -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
+
+	# allow RADIUS protocol with alice
+	iptables -A INPUT  -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT
+	iptables -A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT
+
+	# allow ssh
+	iptables -A INPUT  -p tcp --dport 22 -j ACCEPT
+	iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
+
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+	
+			if [ $a == nat ]; then
+				/sbin/iptables -t nat -P PREROUTING ACCEPT
+				/sbin/iptables -t nat -P POSTROUTING ACCEPT
+				/sbin/iptables -t nat -P OUTPUT ACCEPT
+			elif [ $a == mangle ]; then
+				/sbin/iptables -t mangle -P PREROUTING ACCEPT
+				/sbin/iptables -t mangle -P INPUT ACCEPT
+				/sbin/iptables -t mangle -P FORWARD ACCEPT
+				/sbin/iptables -t mangle -P OUTPUT ACCEPT
+				/sbin/iptables -t mangle -P POSTROUTING ACCEPT
+			elif [ $a == filter ]; then
+				/sbin/iptables -t filter -P INPUT ACCEPT
+				/sbin/iptables -t filter -P FORWARD ACCEPT
+				/sbin/iptables -t filter -P OUTPUT ACCEPT
+			fi
+		done
+	eend $?
+}
+
+reload() {
+	ebegin "Flushing firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+		done;
+        eend $?
+	start
+}
+

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/moon/etc/ipsec.conf

@@ -0,0 +1,25 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn rw-eap
+	left=PH_IP_MOON
+	leftsubnet=10.1.0.0/16
+	leftid=@moon.strongswan.org
+	leftcert=moonCert.pem
+	leftauth=eap
+	leftfirewall=yes
+	rightid=*@strongswan.org
+	rightsendcert=never
+	rightauth=eap-radius
+	right=%any
+	auto=add

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/moon/etc/ipsec.secrets

@@ -0,0 +1 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/moon/etc/strongswan.conf

@@ -0,0 +1,12 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink fips-prf eap-radius updown
+  send_vendor_id = yes
+  plugins {
+    eap-radius {
+      secret = gv6URkSs 
+      server = PH_IP_ALICE
+    }
+  }
+}

testing/tests/ikev2/rw-eap-sim-only-radius/posttest.dat

@@ -0,0 +1,7 @@
+moon::ipsec stop
+carol::ipsec stop
+dave::ipsec stop
+alice::/etc/init.d/radiusd stop
+moon::/etc/init.d/iptables stop 2> /dev/null
+carol::/etc/init.d/iptables stop 2> /dev/null
+dave::/etc/init.d/iptables stop 2> /dev/null

testing/tests/ikev2/rw-eap-sim-only-radius/pretest.dat

@@ -0,0 +1,18 @@
+moon::/etc/init.d/iptables start 2> /dev/null
+carol::/etc/init.d/iptables start 2> /dev/null
+dave::/etc/init.d/iptables start 2> /dev/null
+moon::rm /etc/ipsec.d/cacerts/*
+carol::rm /etc/ipsec.d/cacerts/*
+dave::rm /etc/ipsec.d/cacerts/*
+alice::cat /etc/raddb/clients.conf
+alice::cat /etc/raddb/eap.conf
+alice::cat /etc/raddb/proxy.conf
+alice::cat /etc/raddb/triplets.dat
+alice::/etc/init.d/radiusd start
+moon::ipsec start
+carol::ipsec start
+dave::ipsec start
+carol::sleep 1
+carol::ipsec up home
+dave::ipsec up home
+dave::sleep 1

testing/tests/ikev2/rw-eap-sim-only-radius/test.conf

@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice moon carol winnetou dave"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-c-w-d.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol dave"