added two Elliptic Curve DH Group scenarios using the openssl library

testing/tests/openssl/ike-alg-ecp-high/description.txt

@@ -0,0 +1,17 @@
+The roadwarrior <b>carol</b> and the gateway <b>moon</b> use the <b>openssl</b>
+plugin based on the <b>OpenSSL</b> library for all cryptographical functions
+whereas roadwarrior <b>dave</b> uses the default <b>strongSwan</b> cryptographical
+plugins <b>aes des sha1 sha2 md5 gmp</b> plus the <b>openssl</b> plugin for 
+the Elliptic Curve Diffie-Hellman groups only.
+<p>
+The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each 
+to gateway <b>moon</b>. The authentication is based on <b>X.509 certificates</b>.
+<b>carol</b> proposes the DH groups ECP_256 and ECP_384 whereas <b>dave</b> proposes
+ECP_256 and ECP_521. Since <b>moon</b> does not support ECP_521 the roadwarriors
+fall back to ECP_384 and ECP_521, respectively.
+<p>
+Upon the successful establishment of the IPsec tunnels, <b>leftfirewall=yes</b>
+automatically inserts iptables-based firewall rules that let pass the tunneled traffic.
+In order to test both tunnel and firewall, both <b>carol</b> and <b>dave</b> ping
+the client <b>alice</b> behind the gateway <b>moon</b>.
+

testing/tests/openssl/ike-alg-ecp-high/evaltest.dat

@@ -0,0 +1,12 @@
+carol::cat /var/log/daemon.log::ECP_256_BIT.*ECP_384_BIT::YES
+dave::cat /var/log/daemon.log::ECP_256_BIT.*ECP_521_BIT::YES
+moon::ipsec statusall::rw.*ESTABLISHED::YES
+carol::ipsec statusall::home.*ESTABLISHED::YES
+dave::ipsec statusall::home.*ESTABLISHED::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
+moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
+moon::tcpdump::IP dave.strongswan.org > moon.strongswan.org: ESP::YES
+moon::tcpdump::IP moon.strongswan.org > dave.strongswan.org: ESP::YES
+

testing/tests/openssl/ike-alg-ecp-high/hosts/carol/etc/ipsec.conf

@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+	ike=aes192-sha384-ecp256,aes192-sha384-ecp384!
+
+conn home
+	left=PH_IP_CAROL
+	leftcert=carolCert.pem
+	leftid=carol@strongswan.org
+	leftfirewall=yes
+	right=PH_IP_MOON
+	rightid=@moon.strongswan.org
+	rightsubnet=10.1.0.0/16
+	auto=add

testing/tests/openssl/ike-alg-ecp-high/hosts/carol/etc/strongswan.conf

@@ -0,0 +1,5 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl openssl random x509 hmac stroke
+}

testing/tests/openssl/ike-alg-ecp-high/hosts/dave/etc/ipsec.conf

@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+	ike=aes256-sha512-ecp256,aes256-sha512-ecp521!
+
+conn home
+	left=PH_IP_DAVE
+	leftcert=daveCert.pem
+	leftid=dave@strongswan.org
+	leftfirewall=yes
+	right=PH_IP_MOON
+	rightid=@moon.strongswan.org
+	rightsubnet=10.1.0.0/16
+	auto=add

testing/tests/openssl/ike-alg-ecp-high/hosts/dave/etc/strongswan.conf

@@ -0,0 +1,5 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 gmp openssl random x509 hmac stroke
+}

testing/tests/openssl/ike-alg-ecp-high/hosts/moon/etc/ipsec.conf

@@ -0,0 +1,23 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+	ike=aes192-sha384-ecp384,aes256-sha512-ecp521!
+
+conn rw
+	left=PH_IP_MOON
+	leftcert=moonCert.pem
+	leftid=@moon.strongswan.org
+	leftsubnet=10.1.0.0/16
+	leftfirewall=yes
+	right=%any
+	auto=add

testing/tests/openssl/ike-alg-ecp-high/hosts/moon/etc/strongswan.conf

@@ -0,0 +1,5 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl openssl random x509 hmac stroke
+}

testing/tests/openssl/ike-alg-ecp-high/posttest.dat

@@ -0,0 +1,6 @@
+moon::ipsec stop
+carol::ipsec stop
+dave::ipsec stop
+moon::/etc/init.d/iptables stop 2> /dev/null
+carol::/etc/init.d/iptables stop 2> /dev/null
+dave::/etc/init.d/iptables stop 2> /dev/null

testing/tests/openssl/ike-alg-ecp-high/pretest.dat

@@ -0,0 +1,9 @@
+moon::/etc/init.d/iptables start 2> /dev/null
+carol::/etc/init.d/iptables start 2> /dev/null
+dave::/etc/init.d/iptables start 2> /dev/null
+moon::ipsec start
+carol::ipsec start
+dave::ipsec start
+carol::sleep 1
+carol::ipsec up home
+dave::ipsec up home

testing/tests/openssl/ike-alg-ecp-high/test.conf

@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice moon carol winnetou dave"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-c-w-d.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol dave"

testing/tests/openssl/ike-alg-ecp-low/description.txt

@@ -0,0 +1,17 @@
+The roadwarrior <b>carol</b> and the gateway <b>moon</b> use the <b>openssl</b>
+plugin based on the <b>OpenSSL</b> library for all cryptographical functions
+whereas roadwarrior <b>dave</b> uses the default <b>strongSwan</b> cryptographical
+plugins <b>aes des sha1 sha2 md5 gmp</b> plus the <b>openssl</b> plugin for 
+the Elliptic Curve Diffie-Hellman groups only.
+<p>
+The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each 
+to gateway <b>moon</b>. The authentication is based on <b>X.509 certificates</b>.
+<b>carol</b> proposes the DH groups ECP_192 and ECP_224 whereas <b>dave</b> proposes
+ECP_192 and ECP_256. Since <b>moon</b> does not support ECP_192 the roadwarriors
+fall back to ECP_224 and ECP_256, respectively.
+<p>
+Upon the successful establishment of the IPsec tunnels, <b>leftfirewall=yes</b>
+automatically inserts iptables-based firewall rules that let pass the tunneled traffic.
+In order to test both tunnel and firewall, both <b>carol</b> and <b>dave</b> ping
+the client <b>alice</b> behind the gateway <b>moon</b>.
+

testing/tests/openssl/ike-alg-ecp-low/evaltest.dat

@@ -0,0 +1,12 @@
+carol::cat /var/log/daemon.log::ECP_192_BIT.*ECP_224_BIT::YES
+dave::cat /var/log/daemon.log::ECP_192_BIT.*ECP_256_BIT::YES
+moon::ipsec statusall::rw.*ESTABLISHED::YES
+carol::ipsec statusall::home.*ESTABLISHED::YES
+dave::ipsec statusall::home.*ESTABLISHED::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
+moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
+moon::tcpdump::IP dave.strongswan.org > moon.strongswan.org: ESP::YES
+moon::tcpdump::IP moon.strongswan.org > dave.strongswan.org: ESP::YES
+

testing/tests/openssl/ike-alg-ecp-low/hosts/carol/etc/ipsec.conf

@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+	ike=aes128-sha256-ecp192,aes128-sha256-ecp224!
+
+conn home
+	left=PH_IP_CAROL
+	leftcert=carolCert.pem
+	leftid=carol@strongswan.org
+	leftfirewall=yes
+	right=PH_IP_MOON
+	rightid=@moon.strongswan.org
+	rightsubnet=10.1.0.0/16
+	auto=add

testing/tests/openssl/ike-alg-ecp-low/hosts/carol/etc/strongswan.conf

@@ -0,0 +1,5 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl openssl random x509 hmac stroke
+}

testing/tests/openssl/ike-alg-ecp-low/hosts/dave/etc/ipsec.conf

@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+	ike=aes128-sha256-ecp192,aes128-sha256-ecp256!
+
+conn home
+	left=PH_IP_DAVE
+	leftcert=daveCert.pem
+	leftid=dave@strongswan.org
+	leftfirewall=yes
+	right=PH_IP_MOON
+	rightid=@moon.strongswan.org
+	rightsubnet=10.1.0.0/16
+	auto=add

testing/tests/openssl/ike-alg-ecp-low/hosts/dave/etc/strongswan.conf

@@ -0,0 +1,5 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 gmp openssl random x509 hmac stroke
+}

testing/tests/openssl/ike-alg-ecp-low/hosts/moon/etc/ipsec.conf

@@ -0,0 +1,23 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+	ike=aes128-sha256-ecp224,aes128-sha256-ecp256!
+
+conn rw
+	left=PH_IP_MOON
+	leftcert=moonCert.pem
+	leftid=@moon.strongswan.org
+	leftsubnet=10.1.0.0/16
+	leftfirewall=yes
+	right=%any
+	auto=add

testing/tests/openssl/ike-alg-ecp-low/hosts/moon/etc/strongswan.conf

@@ -0,0 +1,5 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl openssl random x509 hmac stroke
+}

testing/tests/openssl/ike-alg-ecp-low/posttest.dat

@@ -0,0 +1,6 @@
+moon::ipsec stop
+carol::ipsec stop
+dave::ipsec stop
+moon::/etc/init.d/iptables stop 2> /dev/null
+carol::/etc/init.d/iptables stop 2> /dev/null
+dave::/etc/init.d/iptables stop 2> /dev/null

testing/tests/openssl/ike-alg-ecp-low/pretest.dat

@@ -0,0 +1,9 @@
+moon::/etc/init.d/iptables start 2> /dev/null
+carol::/etc/init.d/iptables start 2> /dev/null
+dave::/etc/init.d/iptables start 2> /dev/null
+moon::ipsec start
+carol::ipsec start
+dave::ipsec start
+carol::sleep 1
+carol::ipsec up home
+dave::ipsec up home

testing/tests/openssl/ike-alg-ecp-low/test.conf

@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice moon carol winnetou dave"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-c-w-d.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol dave"