mirror of
https://github.com/qgis/QGIS.git
synced 2025-02-23 00:02:38 -05:00
f5e55df3bc
This change adds two new advanced settings keys for gps: app\gps\bearingAdjustment: allows for specifying a manual adjustment factor to apply to bearings obtained from the GPS, in the case that the GPS reports offset bearings app\gps\correctForTrueNorth: whether to apply a correction for true north to bearings obtained from the GPS (now defaults to off)
217 lines
9.7 KiB
INI
217 lines
9.7 KiB
INI
[qgis]
|
|
|
|
# If true, QGIS will automatically check for new versions on startup and notify users if a new version is available.
|
|
# This setting controls the default value for that setting. Users may still manually enable or disable this check
|
|
# through the QGIS settings dialog.
|
|
checkVersion=true
|
|
|
|
# If true, users may control whether the version check is enabled or disabled through the QGIS settings dialog. (The default
|
|
# check behavior is determined by the 'checkVersion' setting). If false, no version checking will be performed and
|
|
# users will NOT have an option to enable this check in the settings dialog.
|
|
# This setting is intended for use in enterprise installs where QGIS version management is handled centrally.
|
|
allowVersionCheck=true
|
|
|
|
# If true, added layer names will be automatically capitalized and underscores replaced with spaces
|
|
formatLayerName=false
|
|
|
|
# Snapping enabled by default
|
|
digitizing\default_snap_enabled=false
|
|
|
|
# Default snapping tolerance (distance)
|
|
digitizing\default_snapping_tolerance=12.0
|
|
|
|
# Default snap to type
|
|
# Vertex, VertexAndSegment, Segment
|
|
digitizing\default_snap_type=Vertex
|
|
|
|
# Default snapping unit
|
|
# LayerUnits, Pixels, ProjectUnits
|
|
digitizing\default_snapping_tolerance_unit=Pixels
|
|
|
|
# Snap on invisible feature
|
|
digitizing\snap_invisible_feature=false
|
|
|
|
# Default XYZ tile servers to include
|
|
connections-xyz\OpenStreetMap\authcfg=
|
|
connections-xyz\OpenStreetMap\password=
|
|
connections-xyz\OpenStreetMap\referer=
|
|
connections-xyz\OpenStreetMap\url=https://tile.openstreetmap.org/{z}/{x}/{y}.png
|
|
connections-xyz\OpenStreetMap\username=
|
|
connections-xyz\OpenStreetMap\zmax=19
|
|
connections-xyz\OpenStreetMap\zmin=0
|
|
|
|
# application stylesheet
|
|
|
|
# Padding (in pixels) to add to toolbar icons, if blank then default padding will be used
|
|
stylesheet\toolbarSpacing=
|
|
|
|
[app]
|
|
|
|
# Whether the user should be asked to save a layer in case of one or more MemoryLayers
|
|
# when a project is closed.
|
|
# Default to true, set to false to disable this dialog/question.
|
|
askToSaveMemoryLayers=true
|
|
|
|
# Maximum number of recent projects to show on the welcome page
|
|
maxRecentProjects=20
|
|
|
|
# Minimum time (in seconds) for a background task to execute in order for a system
|
|
# notification to be shown when the task completes.
|
|
minTaskLengthForSystemNotification=5
|
|
|
|
# Whether to show the distance panned message in the status bar after a map pan operation
|
|
# occurs. Set to false to disable the message.
|
|
showPanDistanceInStatusBar=true
|
|
|
|
# Whether to prompt users for a selection when multiple possible transformation paths exist
|
|
# when transforming coordinates. If false, a reasonable choice will be estimated by default
|
|
# without asking users. If true, users are always required to make this choice themselves.
|
|
projections\promptWhenMultipleTransformsExist=true
|
|
|
|
# Default CRS for newly created projects. Accepts "auth:code" style strings (e.g. EPSG:4326),
|
|
# PROJ strings (must be prefixed with PROJ4:, e.g. "PROJ4:+proj ...."), or WKT strings (must
|
|
# be prefixed with WKT:, e.g. "WKT:<wkt string>")
|
|
# This is only used when projections\newProjectCrsBehavior is set to UsePresetCrs
|
|
projections\defaultProjectCrs=EPSG:4326
|
|
|
|
# Specifies the method to set the CRS for a newly created project. Valid options are
|
|
# "UseCrsOfFirstLayerAdded" - sets the project CRS to match the CRS of the first layer added to the project
|
|
# "UsePresetCrs" - always use a preset CRS, see projections\defaultProjectCrs
|
|
projections\newProjectCrsBehavior=UseCrsOfFirstLayerAdded
|
|
|
|
# Specifies the behavior when adding a layer with unknown/invalid CRS to a project
|
|
# "NoAction" - take no action and leave as unknown CRS
|
|
# "PromptUserForCrs" - user is prompted for a CRS choice
|
|
# "UseProjectCrs" - copy the current project's CRS
|
|
# "UseDefaultCrs" - use the default layer CRS set via QGIS options
|
|
projections\unknownCrsBehavior=NoAction
|
|
|
|
# Specifies a manual bearing correction to apply to bearings reported by a GPS
|
|
# device, for use when a map canvas is set to match rotation to the GPS bearing
|
|
# or when showing the GPS bearing line
|
|
gps\bearingAdjustment=0
|
|
|
|
# Set to "true" to automatically correct GPS reported bearings for true north
|
|
# when a map canvas is set to match rotation to the GPS bearing
|
|
# or when showing the GPS bearing line
|
|
gps\correctForTrueNorth=false
|
|
|
|
[core]
|
|
|
|
# Desired flow control mode for serial port GPS connections
|
|
# "NoFlowControl" - no flow control
|
|
# "HardwareControl" - hardware flow control (RTS/CTS)
|
|
# "SoftwareControl" - software flow control (XON/XOFF)
|
|
gps\flow_control=NoFlowControl
|
|
|
|
# Desired parity checking mode for serial port GPS connections
|
|
# "NoParity" - No parity bit it sent. This is the most common parity setting. Error detection is handled by the communication protocol.
|
|
# "EvenParity" - The number of 1 bits in each character, including the parity bit, is always even.
|
|
# "OddParity" - The number of 1 bits in each character, including the parity bit, is always odd. It ensures that at least one state transition occurs in each character.
|
|
# "SpaceParity" - Space parity. The parity bit is sent in the space signal condition. It does not provide error detection information.
|
|
# "MarkParity" - Mark parity. The parity bit is always set to the mark signal condition (logical 1). It does not provide error detection information.
|
|
gps\parity=NoParity
|
|
|
|
# Desired data bits in a frame for serial port GPS connections
|
|
# "Data5" - The number of data bits in each character is 5. It is used for Baudot code. It generally only makes sense with older equipment such as teleprinters.
|
|
# "Data6" - The number of data bits in each character is 6. It is rarely used.
|
|
# "Data7" - The number of data bits in each character is 7. It is used for true ASCII. It generally only makes sense with older equipment such as teleprinters.
|
|
# "Data8" - The number of data bits in each character is 8. It is used for most kinds of data, as this size matches the size of a byte. It is almost universally used in newer applications.
|
|
gps\data_bits=Data8
|
|
|
|
# Desired number of stop bits in a frame for serial port GPS connections
|
|
# "OneStop" - 1 stop bit.
|
|
# "OneAndHalfStop" - 1.5 stop bits. This is only for the Windows platform.
|
|
# "TwoStop" - 2 stop bits.
|
|
gps\stop_bits=OneStop
|
|
|
|
# Whether or not to anonymize newly created projects
|
|
# If set to true, then project metadata items like AUTHOR and CREATION DATE
|
|
# will not be automatically populated when a new project is created.
|
|
projects\anonymize_new_projects=false
|
|
|
|
# Whether or not to anonymize projects when saving
|
|
# If set to true, then username information will not be stored in saved projects
|
|
projects\anonymize_saved_projects=false
|
|
|
|
# News feed settings
|
|
# Set to true to disable the QGIS news feed on the welcome page
|
|
NewsFeed\http00008000\disabled=false
|
|
|
|
# Optionally, set to an ISO-939-1 two letter language code to filter the QGIS news feed by language
|
|
NewsFeed\http00008000\lang=
|
|
|
|
# Optionally, set to a specific user latitude and longitude to filter the QGIS news feed to remove
|
|
# local news outside of the users geographic area
|
|
NewsFeed\http00008000\lat=
|
|
NewsFeed\http00008000\long=
|
|
|
|
# When new projects are created, default to planimetric measurement.
|
|
measure\planimetric=false
|
|
|
|
# When set to a non-zero value, places a global limit on the maximum number of label candidates which
|
|
# are generated for point features. Setting this limit to a low (non-zero) value can improve map rendering
|
|
# time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates
|
|
# that no limit is present.
|
|
rendering\label_candidates_limit_points=0
|
|
|
|
# When set to a non-zero value, places a global limit on the maximum number of label candidates which
|
|
# are generated for line features. Setting this limit to a low (non-zero) value can improve map rendering
|
|
# time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates
|
|
# that no limit is present.
|
|
rendering\label_candidates_limit_lines=0
|
|
|
|
# When set to a non-zero value, places a global limit on the maximum number of label candidates which
|
|
# are generated for polygon features. Setting this limit to a low (non-zero) value can improve map rendering
|
|
# time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates
|
|
# that no limit is present.
|
|
rendering\label_candidates_limit_polygons=0
|
|
|
|
[colors]
|
|
# These colors are used in logs.
|
|
default=
|
|
info=
|
|
success=
|
|
warning=#dc7d00
|
|
critical=#c80000
|
|
|
|
[help]
|
|
# Default help location to include
|
|
# for now this is online version of the User Guide for latest (LTR) release
|
|
helpSearchPath=https://docs.qgis.org/$qgis_short_version/$qgis_locale/docs/user_manual/
|
|
|
|
[providers]
|
|
# Default timeout for PostgreSQL servers (seconds)
|
|
PostgreSQL\default_timeout=30
|
|
|
|
[gui]
|
|
# Maximum number of entries to show in Relation Reference widgets. Too large a number here can
|
|
# cause performance issues, as the records must all be loaded from the related table on display.
|
|
maxEntriesRelationWidget=100
|
|
|
|
# Path to default image to use for layout north arrows
|
|
# Acceptable formats include local paths, http(s) urls, or even base64 encoded SVGs (prefixed with base64:....)
|
|
LayoutDesigner\defaultNorthArrow=:/images/north_arrows/layout_default_north_arrow.svg
|
|
|
|
# Default font to use in layout designer
|
|
LayoutDesigner\defaultFont=
|
|
|
|
[geometry_validation]
|
|
# A comma separated list of geometry validations to enable by default for newly added layers
|
|
# Available checks: QgsIsValidCheck,QgsGeometryGapCheck,QgsGeometryOverlapCheck,QgsGeometryMissingVertexCheck
|
|
default_checks=
|
|
|
|
# Enable problem resolution for geometry errors
|
|
# This feature is experimental and has known issues.
|
|
enable_problem_resolution=false
|
|
|
|
|
|
[gps]
|
|
# Default for GPS leap seconds correction as of 2019-06-19
|
|
leapSecondsCorrection=18
|
|
|
|
# [proxy]
|
|
# # URL list for which proxy configuration doesn't apply. In the case of these URLs, the default system proxy configuration
|
|
# # is applied
|
|
# proxyExcludedUrls=http://intranet,http://anotherproxy
|