mirror of
https://github.com/qgis/QGIS.git
synced 2025-02-24 00:47:57 -05:00
0aad51c6d4
Instead of always defaulting to 100mb, then base the cache size on the system memory: - > 32gb, use 500mb - 16-32gb, use 250mb - else 100mb The larger sizes can make a big difference to rendering speed for complex projects, so let's let powerful systems utilise all that memory! (Only supported on linux for now)
263 lines
12 KiB
INI
263 lines
12 KiB
INI
[qgis]
|
|
|
|
# If true, QGIS will automatically check for new versions on startup and notify users if a new version is available.
|
|
# This setting controls the default value for that setting. Users may still manually enable or disable this check
|
|
# through the QGIS settings dialog.
|
|
checkVersion=true
|
|
|
|
# If true, users may control whether the version check is enabled or disabled through the QGIS settings dialog. (The default
|
|
# check behavior is determined by the 'checkVersion' setting). If false, no version checking will be performed and
|
|
# users will NOT have an option to enable this check in the settings dialog.
|
|
# This setting is intended for use in enterprise installs where QGIS version management is handled centrally.
|
|
allowVersionCheck=true
|
|
|
|
# If true, added layer names will be automatically capitalized and underscores replaced with spaces
|
|
formatLayerName=false
|
|
|
|
# If set to true then directories will be automatically monitored and refreshed when their contents change outside of QGIS.
|
|
# This monitoring can be expensive, especially for remote or network drives, in which case setting this option to false
|
|
# can result in a speedup of the QGIS interface.
|
|
monitorDirectoriesInBrowser=true
|
|
|
|
# Snapping enabled by default
|
|
digitizing\default_snap_enabled=false
|
|
|
|
# Default snapping tolerance (distance)
|
|
digitizing\default_snapping_tolerance=12.0
|
|
|
|
# Default snap to type
|
|
# Vertex, VertexAndSegment, Segment
|
|
digitizing\default_snap_type=Vertex
|
|
|
|
# Default snapping unit
|
|
# LayerUnits, Pixels, ProjectUnits
|
|
digitizing\default_snapping_tolerance_unit=Pixels
|
|
|
|
# Snap on invisible feature
|
|
digitizing\snap_invisible_feature=false
|
|
|
|
# Default XYZ tile servers to include
|
|
connections-xyz\OpenStreetMap\authcfg=
|
|
connections-xyz\OpenStreetMap\password=
|
|
connections-xyz\OpenStreetMap\referer=
|
|
connections-xyz\OpenStreetMap\url=https://tile.openstreetmap.org/{z}/{x}/{y}.png
|
|
connections-xyz\OpenStreetMap\username=
|
|
connections-xyz\OpenStreetMap\zmax=19
|
|
connections-xyz\OpenStreetMap\zmin=0
|
|
|
|
connections-xyz\Mapzen Global Terrain\authcfg=
|
|
connections-xyz\Mapzen Global Terrain\password=
|
|
connections-xyz\Mapzen Global Terrain\referer=
|
|
connections-xyz\Mapzen Global Terrain\url=https://s3.amazonaws.com/elevation-tiles-prod/terrarium/{z}/{x}/{y}.png
|
|
connections-xyz\Mapzen Global Terrain\username=
|
|
connections-xyz\Mapzen Global Terrain\zmax=15
|
|
connections-xyz\Mapzen Global Terrain\zmin=0
|
|
connections-xyz\Mapzen Global Terrain\interpretation=terrariumterrain
|
|
|
|
# The image format selected by default when adding a WMS, i.e. image/png. If empty, the first available format is used
|
|
WMSDefaultFormat=""
|
|
|
|
# application stylesheet
|
|
|
|
# Padding (in pixels) to add to toolbar icons, if blank then default padding will be used
|
|
stylesheet\toolbarSpacing=
|
|
|
|
# If true, new projects are using relative paths. If false, new projects default to absolute paths.
|
|
defaultProjectPathsRelative=true
|
|
|
|
# Max image cache size in bytes.
|
|
# The cache is used for caching symbology and layout images,
|
|
# If high resolution images are used for printing layout, then this
|
|
# value should be increased accordingly.
|
|
# If 0, will use a default value calculated based on the system memory (which defaults to 100mb)
|
|
maxImageCacheSize=0
|
|
|
|
[app]
|
|
|
|
# Whether the user should be asked to save a layer in case of one or more MemoryLayers
|
|
# when a project is closed.
|
|
# Default to true, set to false to disable this dialog/question.
|
|
askToSaveMemoryLayers=true
|
|
|
|
# Maximum number of recent projects to show on the welcome page
|
|
maxRecentProjects=20
|
|
|
|
# Minimum time (in seconds) for a background task to execute in order for a system
|
|
# notification to be shown when the task completes.
|
|
minTaskLengthForSystemNotification=5
|
|
|
|
# Whether to show the distance panned message in the status bar after a map pan operation
|
|
# occurs. Set to false to disable the message.
|
|
showPanDistanceInStatusBar=true
|
|
|
|
# Whether to prompt users for a selection when multiple possible transformation paths exist
|
|
# when transforming coordinates. If false, a reasonable choice will be estimated by default
|
|
# without asking users. If true, users are always required to make this choice themselves.
|
|
projections\promptWhenMultipleTransformsExist=true
|
|
|
|
# Default CRS for newly created projects. Accepts "auth:code" style strings (e.g. EPSG:4326),
|
|
# PROJ strings (must be prefixed with PROJ4:, e.g. "PROJ4:+proj ...."), or WKT strings (must
|
|
# be prefixed with WKT:, e.g. "WKT:<wkt string>")
|
|
# This is only used when projections\newProjectCrsBehavior is set to UsePresetCrs
|
|
projections\defaultProjectCrs=EPSG:4326
|
|
|
|
# Specifies the method to set the CRS for a newly created project. Valid options are
|
|
# "UseCrsOfFirstLayerAdded" - sets the project CRS to match the CRS of the first layer added to the project
|
|
# "UsePresetCrs" - always use a preset CRS, see projections\defaultProjectCrs
|
|
projections\newProjectCrsBehavior=UseCrsOfFirstLayerAdded
|
|
|
|
# Specifies the behavior when adding a layer with unknown/invalid CRS to a project
|
|
# "NoAction" - take no action and leave as unknown CRS
|
|
# "PromptUserForCrs" - user is prompted for a CRS choice
|
|
# "UseProjectCrs" - copy the current project's CRS
|
|
# "UseDefaultCrs" - use the default layer CRS set via QGIS options
|
|
projections\unknownCrsBehavior=NoAction
|
|
|
|
# If the inherent inaccuracy in a selected CRS exceeds this threshold value (in meters),
|
|
# a warning message will be shown to the user advising them to select an alternative
|
|
# CRS if higher positional accuracy is required
|
|
projections\crsAccuracyWarningThreshold=0.0
|
|
|
|
# If set to true, a warning icon will be shown next to any layer where the layer's CRS exceeds
|
|
# the accuracy warning threshold value (see crsAccuracyWarningThreshold)
|
|
projections\crsAccuracyIndicator=false
|
|
|
|
# Specifies a manual bearing correction to apply to bearings reported by a GPS
|
|
# device, for use when a map canvas is set to match rotation to the GPS bearing
|
|
# or when showing the GPS bearing line
|
|
gps\bearingAdjustment=0
|
|
|
|
# Set to "true" to automatically correct GPS reported bearings for true north
|
|
# when a map canvas is set to match rotation to the GPS bearing
|
|
# or when showing the GPS bearing line
|
|
gps\correctForTrueNorth=false
|
|
|
|
[core]
|
|
|
|
# Desired flow control mode for serial port GPS connections
|
|
# "NoFlowControl" - no flow control
|
|
# "HardwareControl" - hardware flow control (RTS/CTS)
|
|
# "SoftwareControl" - software flow control (XON/XOFF)
|
|
gps\flow_control=NoFlowControl
|
|
|
|
# Desired parity checking mode for serial port GPS connections
|
|
# "NoParity" - No parity bit it sent. This is the most common parity setting. Error detection is handled by the communication protocol.
|
|
# "EvenParity" - The number of 1 bits in each character, including the parity bit, is always even.
|
|
# "OddParity" - The number of 1 bits in each character, including the parity bit, is always odd. It ensures that at least one state transition occurs in each character.
|
|
# "SpaceParity" - Space parity. The parity bit is sent in the space signal condition. It does not provide error detection information.
|
|
# "MarkParity" - Mark parity. The parity bit is always set to the mark signal condition (logical 1). It does not provide error detection information.
|
|
gps\parity=NoParity
|
|
|
|
# Desired data bits in a frame for serial port GPS connections
|
|
# "Data5" - The number of data bits in each character is 5. It is used for Baudot code. It generally only makes sense with older equipment such as teleprinters.
|
|
# "Data6" - The number of data bits in each character is 6. It is rarely used.
|
|
# "Data7" - The number of data bits in each character is 7. It is used for true ASCII. It generally only makes sense with older equipment such as teleprinters.
|
|
# "Data8" - The number of data bits in each character is 8. It is used for most kinds of data, as this size matches the size of a byte. It is almost universally used in newer applications.
|
|
gps\data_bits=Data8
|
|
|
|
# Desired number of stop bits in a frame for serial port GPS connections
|
|
# "OneStop" - 1 stop bit.
|
|
# "OneAndHalfStop" - 1.5 stop bits. This is only for the Windows platform.
|
|
# "TwoStop" - 2 stop bits.
|
|
gps\stop_bits=OneStop
|
|
|
|
# Whether or not to anonymize newly created projects
|
|
# If set to true, then project metadata items like AUTHOR and CREATION DATE
|
|
# will not be automatically populated when a new project is created.
|
|
projects\anonymize_new_projects=false
|
|
|
|
# Whether or not to anonymize projects when saving
|
|
# If set to true, then username information will not be stored in saved projects
|
|
projects\anonymize_saved_projects=false
|
|
|
|
# News feed settings
|
|
# Set to true to disable the QGIS news feed on the welcome page
|
|
NewsFeed\http00008000\disabled=false
|
|
|
|
# Optionally, set to an ISO-939-1 two letter language code to filter the QGIS news feed by language
|
|
NewsFeed\http00008000\lang=
|
|
|
|
# Optionally, set to a specific user latitude and longitude to filter the QGIS news feed to remove
|
|
# local news outside of the users geographic area
|
|
NewsFeed\http00008000\lat=
|
|
NewsFeed\http00008000\long=
|
|
|
|
# When new projects are created, default to planimetric measurement.
|
|
measure\planimetric=false
|
|
|
|
# When set to a non-zero value, places a global limit on the maximum number of label candidates which
|
|
# are generated for point features. Setting this limit to a low (non-zero) value can improve map rendering
|
|
# time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates
|
|
# that no limit is present.
|
|
rendering\label_candidates_limit_points=0
|
|
|
|
# When set to a non-zero value, places a global limit on the maximum number of label candidates which
|
|
# are generated for line features. Setting this limit to a low (non-zero) value can improve map rendering
|
|
# time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates
|
|
# that no limit is present.
|
|
rendering\label_candidates_limit_lines=0
|
|
|
|
# When set to a non-zero value, places a global limit on the maximum number of label candidates which
|
|
# are generated for polygon features. Setting this limit to a low (non-zero) value can improve map rendering
|
|
# time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates
|
|
# that no limit is present.
|
|
rendering\label_candidates_limit_polygons=0
|
|
|
|
[colors]
|
|
# These colors are used in logs.
|
|
default=
|
|
info=
|
|
success=
|
|
warning=#dc7d00
|
|
critical=#c80000
|
|
|
|
[help]
|
|
# Default help location to include
|
|
# for now this is online version of the User Guide for latest (LTR) release
|
|
helpSearchPath=https://docs.qgis.org/$qgis_short_version/$qgis_locale/docs/user_manual/
|
|
|
|
[providers]
|
|
# Whether deprecated data providers should be shown in the QGIS UI (e.g. db2)
|
|
# Warning: these providers are NOT supported and they will be dropped in a future QGIS
|
|
# version. Commercial users requiring on these providers should contact the QGIS
|
|
# project ASAP and arrange for ongoing funding of the provider to prevent their
|
|
# removal and restore them to fully supported status.
|
|
showDeprecated=false
|
|
|
|
# Default timeout for PostgreSQL servers (seconds)
|
|
PostgreSQL\default_timeout=30
|
|
|
|
[gui]
|
|
# Maximum number of entries to show in Relation Reference widgets. Too large a number here can
|
|
# cause performance issues, as the records must all be loaded from the related table on display.
|
|
maxEntriesRelationWidget=100
|
|
|
|
# Path to default image to use for layout north arrows
|
|
# Acceptable formats include local paths, http(s) urls, or even base64 encoded SVGs (prefixed with base64:....)
|
|
LayoutDesigner\defaultNorthArrow=:/images/north_arrows/layout_default_north_arrow.svg
|
|
|
|
# Default font to use in layout designer
|
|
LayoutDesigner\defaultFont=
|
|
|
|
[geometry_validation]
|
|
# A comma separated list of geometry validations to enable by default for newly added layers
|
|
# Available checks: QgsIsValidCheck,QgsGeometryGapCheck,QgsGeometryOverlapCheck,QgsGeometryMissingVertexCheck
|
|
default_checks=
|
|
|
|
# Enable problem resolution for geometry errors
|
|
# This feature is experimental and has known issues.
|
|
enable_problem_resolution=false
|
|
|
|
|
|
[gps]
|
|
# Default for GPS leap seconds correction as of 2019-06-19
|
|
leapSecondsCorrection=18
|
|
|
|
# Path to (or command name for) the GPSBabel executable file
|
|
gpsbabelPath=gpsbabel
|
|
|
|
[proxy]
|
|
# # URL list for which proxy configuration doesn't apply. In the case of these URLs, the default system proxy configuration
|
|
# # is applied
|
|
# proxyExcludedUrls=http://intranet,http://anotherproxy
|