QGIS/i18n/qgis_it.ts

<!DOCTYPE TS>
<TS>
  <context>
    <name>QFileDialog</name>
    <message>
      <source>open files dialog</source>
      <translation>apri finestra di dialogo dei file</translation>
    </message>
    <message>
      <source>Save file dialog</source>
      <translation>Finestra di dialogo per salvare file</translation>
    </message>
    <message>
      <source>Choose a QGIS project file to open</source>
      <translation>Seleziona un progetto QGIS da caricare</translation>
    </message>
    <message>
      <source>Choose a QGIS project file</source>
      <translation>Selezione un file di progetto QGIS</translation>
    </message>
  </context>
  <context>
    <name>QObject</name>
    <message>
      <source>No Data Providers</source>
      <translation>Nessun supporto per i dati</translation>
    </message>
    <message>
      <source>No Data Provider Plugins</source>
      <comment>No QGIS data provider plugins found in:</comment>
      <translation>Nessun plugin per le sorgenti dati</translation>
    </message>
    <message>
      <source>No vector layers can be loaded. Check your QGIS installation</source>
      <translation>Nessun layer può essere caricato. Controllare l'installazione di QGIS</translation>
    </message>
    <message>
      <source>No data provider plugins are available. No vector layers can be loaded</source>
      <translation>Nessun plugin disponibile per l'accesso ai dati. Nessun layer può essere caricato</translation>
    </message>
    <message>
      <source>QGis files (*.qgs)</source>
      <translation>QGis files (*.qgs)</translation>
    </message>
    <message>
      <source>Open an OGR Supported Layer</source>
      <translation>Apri un layer supportato da OGR</translation>
    </message>
    <message>
      <source>Project file read error</source>
      <translation>Errore nella lettura del file di proiezione</translation>
    </message>
    <message>
      <source> at line </source>
      <translation> alla linea </translation>
    </message>
    <message>
      <source> column </source>
      <translation> colonna</translation>
    </message>
    <message>
      <source> for file </source>
      <translation> per file </translation>
    </message>
    <message>
      <source>No proj4 projection string. Unable to set map units.</source>
      <translation>Nessuna string di proiezione proj. Impossibile definire l'unità mappa.</translation>
    </message>
    <message>
      <source>Unsupported map units of </source>
      <translation> Tipo di unità mappa non supportato</translation>
    </message>
  </context>
  <context>
    <name>QgisApp</name>
    <message>
      <source>Layers</source>
      <translation>layer</translation>
    </message>
    <message>
      <source>Quantum GIS - </source>
      <translation>Quantum GIS - </translation>
    </message>
    <message>
      <source>Version </source>
      <translation>Versione</translation>
    </message>
    <message>
      <source> with PostgreSQL support</source>
      <translation> con supporto PostgreSQL</translation>
    </message>
    <message>
      <source> (no PostgreSQL support)</source>
      <translation> (privo di supporto PostgreSQL)</translation>
    </message>
    <message>
      <source>Version</source>
      <translation>Versione</translation>
    </message>
    <message>
      <source>Available Data Provider Plugins</source>
      <translation>Plugin per l'accesso alle sorgenti dati</translation>
    </message>
    <message>
      <source>is not a valid or recognized data source</source>
      <translation>sorgente dati non valida o sconosciuta</translation>
    </message>
    <message>
      <source>Invalid Data Source</source>
      <translation>Sorgente dati non valida</translation>
    </message>
    <message>
      <source>No OGR Provider</source>
      <translation>Mancato supporto OGR</translation>
    </message>
    <message>
      <source>No OGR data provider was found in the QGIS lib directory</source>
      <translation>Il supporto OGR non è presente nelle librerie di QGIS</translation>
    </message>
    <message>
      <source>No PostgreSQL Provider</source>
      <translation>Mancato supporto PostgreSQL</translation>
    </message>
    <message>
      <source>No PostgreSQL data provider was found in the QGIS lib directory</source>
      <translation>Il supporto per PostgreSQL non è presente nelle librerie di QGIS</translation>
    </message>
    <message>
      <source>Saved map to:</source>
      <translation>Mappa salvata in:</translation>
    </message>
    <message>
      <source>No Layer Selected</source>
      <translation>Nessun layer selezionato</translation>
    </message>
    <message>
      <source>To open an attribute table, you must select a layer in the legend</source>
      <translation>Per visualizzare un attributo di una tabella, è prima necessario selezionare un vettoriale dalla legenda</translation>
    </message>
    <message>
      <source>No MapLayer Plugins</source>
      <translation>Mancato plugin per il layer mappa</translation>
    </message>
    <message>
      <source>No MapLayer plugins in ../plugins/maplayer</source>
      <translation>Nessun plugin per il layer mappa presente in ../plugins/maplayer</translation>
    </message>
    <message>
      <source>No Plugins</source>
      <translation>Nessun plugin</translation>
    </message>
    <message>
      <source>No plugins found in ../plugins. To test plugins, start qgis from the src directory</source>
      <translation>Non esistono plugin nella cartella ./plugins. Per fare un test  di controllo eseguire qgis dalla cartella src</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Plugin %1 is named %2</source>
      <translation>Il plugin %1 ha nome %2</translation>
    </message>
    <message>
      <source>Plugin Information</source>
      <translation>Informazioni del plugin</translation>
    </message>
    <message>
      <source>QGis loaded the following plugin:</source>
      <translation>QGIS ha caricato il plugin:</translation>
    </message>
    <message>
      <source>Name: %1</source>
      <translation>Nome: %1</translation>
    </message>
    <message>
      <source>Version: %1</source>
      <translation>Versione: %1</translation>
    </message>
    <message>
      <source>Description: %1</source>
      <translation>Descrizione: %1</translation>
    </message>
    <message>
      <source>Unable to Load Plugin</source>
      <translation>Non è possibile caricare il plugin</translation>
    </message>
    <message>
      <source>QGIS was unable to load the plugin from: %1</source>
      <translation>QGIS non riesce caricare il plugin da: %1</translation>
    </message>
    <message>
      <source>There is a new version of QGIS available</source>
      <translation>È disponibile una nuova versione di QGIS</translation>
    </message>
    <message>
      <source>You are running a development version of QGIS</source>
      <translation>Si sta utilizzando una versione di sviluppo di QGIS</translation>
    </message>
    <message>
      <source>You are running the current version of QGIS</source>
      <translation>Si sta utilizzando l'ultima versione di QGIS</translation>
    </message>
    <message>
      <source>Would you like more information?</source>
      <translation>Vuoi avere maggiori informazioni?</translation>
    </message>
    <message>
      <source>QGIS Version Information</source>
      <translation>Informazioni sulla versione di QGIS</translation>
    </message>
    <message>
      <source>Yes</source>
      <translation>Sì</translation>
    </message>
    <message>
      <source>No</source>
      <translation>No</translation>
    </message>
    <message>
      <source>Unable to get current version information from server</source>
      <translation>Impossibile recuperare informazioni sulla versione</translation>
    </message>
    <message>
      <source>Connection refused - server may be down</source>
      <translation>Connessione rifiutata - probabilmente il server è stato spento</translation>
    </message>
    <message>
      <source>QGIS server was not found</source>
      <translation>Non è possibile raggiunge il server QGIS</translation>
    </message>
    <message>
      <source>Error reading from server</source>
      <translation>Errore di lettura dal server</translation>
    </message>
    <message>
      <source>Unable to connect to the QGIS Version server</source>
      <translation>Impossibile collegarsi al server delle versioni di QGIS</translation>
    </message>
    <message>
      <source>Loading QGIS...</source>
      <translation>QGIS in caricamento...</translation>
    </message>
    <message>
      <source>Setting up QGIS gui...</source>
      <translation>Preferenze interfaccia utente QGIS...</translation>
    </message>
    <message>
      <source>Loading plugins...</source>
      <translation>Plugin in caricamento...</translation>
    </message>
    <message>
      <source>Invalid Layer</source>
      <translation>layer non valido</translation>
    </message>
    <message>
      <source>%1 is an invalid layer and cannot be loaded.</source>
      <translation>%1 è un layer non valido e non può essere caricato.</translation>
    </message>
    <message>
      <source>Error Loading Plugin</source>
      <translation>Errore di caricamento plugin</translation>
    </message>
    <message>
      <source>There was an error loading %1.</source>
      <translation>Errore nel caricamento di %1.</translation>
    </message>
    <message>
      <source>Saved map image to</source>
      <translation>Mappa salvata nel file immagine </translation>
    </message>
    <message>
      <source>QGIS - Changes in CVS Since Last Release</source>
      <translation>QGIS -Sono state fatte delle modifiche nel CVS rispetto all'ultima versione</translation>
    </message>
    <message>
      <source>Choose a filename to save the map image as</source>
      <translation>Assegna un nome da dare all'immagine</translation>
    </message>
    <message>
      <source>Extents: </source>
      <translation>Estensione:</translation>
    </message>
    <message>
      <source>Problem deleting features</source>
      <translation>Problemi nel cancellare le geometrie</translation>
    </message>
    <message>
      <source>A problem occured during deletion of features</source>
      <translation>Problemi durante l'eliminazione delle geometrie</translation>
    </message>
    <message>
      <source>No Vector Layer Selected</source>
      <translation>Nessun vettoriale selezionato</translation>
    </message>
    <message>
      <source>Deleting features only works on vector layers</source>
      <translation>Le geometrie sono disponibili soltanto sui vettoriali</translation>
    </message>
    <message>
      <source>To delete features, you must select a vector layer in the legend</source>
      <translation>Per cancellare una elemento devi prima selezionare un vettoriale dalla legenda</translation>
    </message>
    <message>
      <source>Quantum GIS is licensed under the GNU General Public License</source>
      <translation>Quantum GIS è distribuito con la licenza GNU General Public License</translation>
    </message>
    <message>
      <source>http://www.gnu.org/licenses</source>
      <translation>http://www.gnu.org/licenses</translation>
    </message>
    <message>
      <source>Render</source>
      <translation>Disegna</translation>
    </message>
    <message>
      <source>Setting theme...</source>
      <translation>Preferenze tema...</translation>
    </message>
    <message>
      <source>QGIS Ready</source>
      <translation>QGIS pronto</translation>
    </message>
    <message>
      <source>Unable to save project</source>
      <translation>Impossibile salvare il progetto</translation>
    </message>
    <message>
      <source>Unable to save project to </source>
      <translation>Impossibile salvare il progetto come </translation>
    </message>
    <message>
      <source>Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.</source>
      <translation>Legenda che mostra tutti i layer attualmente presenti sulla mappa. Per abilitare/disabilitare la vista di un layer basta fare click sul relativo check box. Un doppio click su un layer nella legenda permette di personalizzarne il tipo di rappresentazione ed altre proprietà.</translation>
    </message>
    <message>
      <source>Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.</source>
      <translation>Vista panoramica. Quest'area può essere utilizzata per visualizzare l'estensione attualmente in uso dalla mappa. L'estensione in uso è rappresentata da un rettangolo rosso. Qualsiasi layer può essere aggiunto come vista panoramica.</translation>
    </message>
    <message>
      <source>Map canvas. This is where raster and vector layers are displayed when added to the map</source>
      <translation>Area mappa. Questa è la zona dove raster e vettoriali vengono visualizzati e aggiunti alla mappa</translation>
    </message>
    <message>
      <source>Progress bar that displays the status of rendering layers and other time-intensive operations</source>
      <translation>Barra di progressione che mostra lo stato del ridisegnamento dei layer e moltre altre operazioni che richiedono tempo</translation>
    </message>
    <message>
      <source>Displays the current map scale</source>
      <translation>Mostra la scala attualmente in uso sulla mappa</translation>
    </message>
    <message>
      <source>Shows the map coordinates at the current cursor postion. The display is continuously updated as the mouse is moved.</source>
      <translation>Mostra le coordinate della mappa nella posizione del cursore. L'informazione viene aggiornata ad ogni spostamento del mouse.</translation>
    </message>
    <message>
      <source>When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.</source>
      <translation>Se selezionato, l'area dedicata alla mappa ridisegna tutti i vettoriali con le relative proprietà. Se non selezionato, non avverà alcun ridisegnamento. Questo permette di aggiungere un gran numero di vettoriali e di cambiarne le proprietà prima che vengano disegnati.</translation>
    </message>
    <message>
      <source>&amp;Plugins</source>
      <translation>&amp;Plugins</translation>
    </message>
    <message>
      <source>Toggle map rendering</source>
      <translation> Abilita il rendering della mappa</translation>
    </message>
    <message>
      <source>This icon shows whether on the fly projection is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.</source>
      <translation>Questa icona mostra se il sistema di cambio di proiezione al volo è abilitato o meno. Fai click sull'icona per avere le informazioni sulla proiezione e alterarne il comportamento.</translation>
    </message>
    <message>
      <source>Projection status - Click to open projection dialog</source>
      <translation>Stato della proiezione - Click per aprire la finestra di diaologo della proiezione</translation>
    </message>
    <message>
      <source>On the fly projection support to automatically project layers from different coordinate systems</source>
      <translation>Supporto per il cambio di proiezione al volo di layer con diversi tipi di sistemi di coordinate</translation>
    </message>
    <message>
      <source>Map Composer for creating map layouts</source>
      <translation>Map Composer per creare il layout della mappa</translation>
    </message>
    <message>
      <source>Toolbox for running GRASS tools from QGIS. The toolbox can be easily customized to add additional tools</source>
      <translation> Toolbox per eseguire comandi GRASS da QGIS. Il toolbox può essere personalizzato facilmente aggiungendo altri comandi.</translation>
    </message>
    <message>
      <source>Handling of spatially enabled tables and views in PostgreSQL has been greatly improved. QGIS can now load any table in the database that contains a geometry column</source>
      <translation>La gestione delle tabelle e viste spaziali PostgreSQL è stato migliorato pesantemente. QGIS ora è in grado di caricare un qualsiasi tipo di tabella che contiene almeno una colonna di tipo geometrico.</translation>
    </message>
    <message>
      <source>PostgreSQL views containing a geometry column can be viewed in QGIS</source>
      <translation>Le viste PostgreSQL contenenti geometrie possono essere visualizzate in QGIS</translation>
    </message>
    <message>
      <source>Raster graphing tool to produce a histogram for a raster layer</source>
      <translation>Strumento grafico per la creazione di istogrammi da un raster</translation>
    </message>
    <message>
      <source>Raster query using the identify tool allows you to get the pixel values from a raster by making it the active layer and clicking on the point of interest</source>
      <translation>L'interrogazione dei raster attraverso il tool di identificazione permette di ottenere i valori dei pixel partendo da un raster attivo e facendo click sul punto di interesse.</translation>
    </message>
    <message>
      <source>User preferences provides customizable settings for the digitizing line width, color, and selection color</source>
      <translation>Le preferenze utente permettono di personalizzare i parametri per la digitalizzazione (larghezza linea, colore e colore per la selezione)</translation>
    </message>
    <message>
      <source>New symbols for use with point layers are available from the layer properties dialog</source>
      <translation>Disponibili nuovi simboli da utilizzare per i vettoriali di tipo puntuale dalla finestra di dialogo della proprietà del layer</translation>
    </message>
    <message>
      <source>Spatial bookmarks allow you to create and manage bookmarks for an area on the map. Bookmarks are persistent and global; meaning they are available for all projects</source>
      <translation>I segnalibri spaziali permettono di creare e gestire segnalibri per un area sulla mappa. I segnalibri sono persistenti e globali, questo vuol dire che possono essere utilizzati da tutti i progetti</translation>
    </message>
    <message>
      <source>Measure tool allows you to measure distances on the map with both segment length and total length displayed as you click</source>
      <translation>Lo strumento di misurazione permette di calcolare, ad ogni click,  la distanza sulla mappa sia con per la lunghezza dei segmenti sia per il totale.</translation>
    </message>
    <message>
      <source>GPX loading times and memory consumption for large GPX (GPS) files has been drastically reduced</source>
      <translation>Il tempo di caricamento e la quantità di memoria impiegata per il caricamento di file GPX (GPS) è stata drasticamente ridotto</translation>
    </message>
    <message>
      <source>Many enhancements to the digitizing tools have been made, including the ability to capture data straight into PostgreSQL/PostGIS, and improvements to the definition of attribute tables for newly created layers</source>
      <translation>Sono stati inserite diverse migliore per lo strumento di digitalizzazione, inclusa la possibilità di archiviare direttamente in PostgreSQL/PostGIS e la definizione di nuovi attributi nelle tabelle per i nuovi vettoriali creati</translation>
    </message>
    <message>
      <source>The Raster Georeferencer plugin can be used to generate a world file for a raster. The plugin allows you to define known control points in the raster coordinate system. Once enough control points are defined, the world file can be generated and the raster properly displayed in QGIS or other GIS applications</source>
      <translation>Il plugin di georeferenzazione dei raster (Raster Georeferencer) può essere usato per generare un world file da un raster. Il plugin permette di definire i punti del controllo secondo il sistema di coordinate del raster. Una volta che è i punti sono stati individuati, verrà generato un world file che permetterà di visualizzare il raster georeferenziato in QGIS o qualsiasi altra applicazione GIS:</translation>
    </message>
    <message>
      <source>Improvements to the Mapserver export tool</source>
      <translation>Migliorie nel tool di esportazione per Mapserver</translation>
    </message>
    <message>
      <source>Open an OGR Supported Vector Layer</source>
      <translation>Supporto per il caricamento di un qualsiasi vettoriale supportato da OGR</translation>
    </message>
    <message>
      <source>QGIS Project Read Error</source>
      <translation>Errore di lettura del progetto QGIS</translation>
    </message>
    <message>
      <source></source>
      <translation> </translation>
    </message>
    <message>
      <source>Try to find missing layers?</source>
      <translation>Provo a cercare i layer persi?</translation>
    </message>
    <message>
      <source>Open a GDAL Supported Raster Data Source</source>
      <translation>Apri un raster supportato da GDAL</translation>
    </message>
  </context>
  <context>
    <name>QgisAppBase</name>
    <message>
      <source>Quantum GIS</source>
      <translation>Quantum GIS</translation>
    </message>
    <message>
      <source>&amp;Help</source>
      <translation>&amp;Aiuto</translation>
    </message>
    <message>
      <source>File Management Toolbar</source>
      <translation>Barra strumenti gestione file</translation>
    </message>
    <message>
      <source>Data Toolbar</source>
      <translation>Barra strumenti dei dati</translation>
    </message>
    <message>
      <source>Map Navigation Toolbar</source>
      <translation>Barra strumenti per la navigazione mappa</translation>
    </message>
    <message>
      <source>Attribute Data Toolbar</source>
      <translation>Barra strumenti degli attributi</translation>
    </message>
    <message>
      <source>Open Project</source>
      <translation>Apri progetto</translation>
    </message>
    <message>
      <source>Exit</source>
      <translation>Esci</translation>
    </message>
    <message>
      <source>E&amp;xit</source>
      <translation>E&amp;sci</translation>
    </message>
    <message>
      <source>Refresh </source>
      <translation>Aggiorna </translation>
    </message>
    <message>
      <source>Zoom to full extent</source>
      <translation>Zoom all'estensione massima</translation>
    </message>
    <message>
      <source>Map Navigation Tools</source>
      <translation>Strumenti per la navigazione</translation>
    </message>
    <message>
      <source>Zoom &amp;In</source>
      <translation>Zoom avant&amp;i</translation>
    </message>
    <message>
      <source>Pan</source>
      <translation>Sposta</translation>
    </message>
    <message>
      <source>&amp;Pan</source>
      <translation>S&amp;posta</translation>
    </message>
    <message>
      <source>Zoom out</source>
      <translation>Zoom indietro</translation>
    </message>
    <message>
      <source>Identify</source>
      <translation>Identifica</translation>
    </message>
    <message>
      <source>Identify a feature on the active layer</source>
      <translation>Identifica l'elemento del vettoriale attivo</translation>
    </message>
    <message>
      <source>select features</source>
      <translation>seleziona elementi</translation>
    </message>
    <message>
      <source>&amp;About Quantum GIS</source>
      <translation>&amp;Informazioni su Quantum GIS</translation>
    </message>
    <message>
      <source>Test button</source>
      <translation>Bottone di test</translation>
    </message>
    <message>
      <source>Add a vector layer (e.g. Shapefile)</source>
      <translation>Aggiungi un vettoriale (es. Shapefile)</translation>
    </message>
    <message>
      <source>Attribute table</source>
      <translation>Tabella attributi</translation>
    </message>
    <message>
      <source>Open the attribute table for the selected layer</source>
      <translation>Apri la tabella attributi del vettoriale selezionato</translation>
    </message>
    <message>
      <source>Action</source>
      <translation>Azione</translation>
    </message>
    <message>
      <source>Zoom to last extent</source>
      <translation>Zoom precedente</translation>
    </message>
    <message>
      <source>Test plugin functions</source>
      <translation>Plugin di test delle funzioni</translation>
    </message>
    <message>
      <source>Save Project</source>
      <translation>Salva il progetto</translation>
    </message>
    <message>
      <source>Save Project As...</source>
      <translation>Salva il progetto con nome...</translation>
    </message>
    <message>
      <source>Plugin Manager</source>
      <translation>Gestore dei plugin</translation>
    </message>
    <message>
      <source>Check QGIS Version</source>
      <translation>Controlla la versione di QGIS</translation>
    </message>
    <message>
      <source>Add a PostGIS Layer</source>
      <translation>Aggiungi un vettoriale PostGIS</translation>
    </message>
    <message>
      <source>Zoom to selected features</source>
      <translation>Zoom sugli elementi selezionati</translation>
    </message>
    <message>
      <source>Zoom to selected features in active layer</source>
      <translation>Zoom sugli elementi selezionati nel layer attivo</translation>
    </message>
    <message>
      <source>Add a Vector Layer</source>
      <translation>Aggiungi un vettoriale</translation>
    </message>
    <message>
      <source>Start a new QGIS project</source>
      <translation>Comincia un nuovo progetto QGIS</translation>
    </message>
    <message>
      <source>Export to MapServer</source>
      <translation>Esporta per MapServer</translation>
    </message>
    <message>
      <source>Add a Raster Layer</source>
      <translation>Aggiungi un raster</translation>
    </message>
    <message>
      <source>&amp;Contents</source>
      <translation>&amp;Contenuti</translation>
    </message>
    <message>
      <source>QGIS Help (HTML)</source>
      <translation>Aiuto QGIS (HTML)</translation>
    </message>
    <message>
      <source>Preferences</source>
      <translation>Preferenze</translation>
    </message>
    <message>
      <source>QGIS User Preferences</source>
      <translation>QGIS preferenze utente</translation>
    </message>
    <message>
      <source>QGIS Home Page</source>
      <translation>QGIS Home Page</translation>
    </message>
    <message>
      <source>QGIS SourceForge Page</source>
      <translation>QGIS SourceForge Page</translation>
    </message>
    <message>
      <source>Help Toolbar</source>
      <translation>Barra strumenti di aiuto</translation>
    </message>
    <message>
      <source>Open a previously saved QGIS project file. The layers (raster and vector) stored in the project file will be loaded and displayed on the map canvas</source>
      <translation>Apre un progetto QGIS precedentemente salvato. I layer (raster e vettoriali) archiviati nel progetto verrannò caricati e visualizzati nell'area dedicata alla mappa mappa</translation>
    </message>
    <message>
      <source>Close all layers and exit QGIS</source>
      <translation>Chiudi tutti i layer ed esci da QGIS</translation>
    </message>
    <message>
      <source>Add a PostgreSQL layer to the map. This requires a properly configured and running PostgreSQL database and the PostGIS extensions.</source>
      <translation>Aggiungi un vettoriale PostgreSQL alla mappa. Per funzionae è necessario che il server PostgreSQL sia accessibile via rete e sia configurato con l'estensione PostGIS.</translation>
    </message>
    <message>
      <source>Refresh the map by clearing the map canvas and redrawing all visible layers</source>
      <translation>Aggiorna la mappa cancellandola e ridisegnando tutti i layer visibili</translation>
    </message>
    <message>
      <source>Zoom to the full extent of all layers on the map. This brings everything on the map into full view</source>
      <translation>Zoom all'estensione massima di tutti i layer contenuti nella mappa.</translation>
    </message>
    <message>
      <source>Zoom in on the map. Drag the mouse (hold down the left button) to draw a rectangle around the area you want to zoom to, then release the mouse.</source>
      <translation>Zoom avanti sulla mappa. Spostando il mouse sulla mappa (tenendo premuto il bottone sinistro del mouse) si otterrà un rettangolo del nuovo inquadramento.</translation>
    </message>
    <message>
      <source>Pan the map view by dragging the mouse (hold down the left button). The area displayed will change after the mouse is released.</source>
      <translation>Sposta la mappa trascinando il mouse (con il bottone sinistro premuto). L'inquadramento della mappa cambierà nel momento in cui il mouse verrà rilasciato</translation>
    </message>
    <message>
      <source>Zoom out to view more of the map. Drag the mouse (hold down the left button) to draw a rectangle around an area. The current view will zoomed out and resized to &quot;fit&quot; in the rectangle.</source>
      <translation>Zoom indietro per avere una vista maggiore della mappa. Trascinare il mouse (tenendo premuto il bottone di sinistra del mouse) disegnando un rettangolo intorno all'area di interesse. Al rilascio del mouse l'inquadramento rimpicciolerà per 'riempire' il rettangolo.</translation>
    </message>
    <message>
      <source>Zoom to the extent of selected features on the active layer. The view will be zoomed so that all selected features are visible. If there are no selected features, the view is not changed.</source>
      <translation>Zoom della mappa sull'insieme degli elementi selezionati sul layer attivo. Qualora non sia stato selezionato nessun elemento, non avverrà alcuna operazione di zoom.</translation>
    </message>
    <message>
      <source>Identify a feature on the active layer (the active layer is the highlighted layer in the legend). Idenify searches for features near where the mouse is clicked and displays information about the results. The search radius can be customized on the QGIS Preferences dialog.</source>
      <translation>Recupera informazioni sul elemento del vettoriale attivo (quello che compare illuminato in legenda). 
Facendo click in prossimità della geometria da interrogare comparirà una tabella con le relative informazioni. Il raggio di ricerca del click può essere modificato nelle impostazioni di QGIS.</translation>
    </message>
    <message>
      <source>Select features on the active layer by dragging the mouse to create a box around the features of interest. When the mouse is released, the features are selected and drawn in a different color (default is yellow)</source>
      <translation>Seleziona gli elementi del layer attivo raccogliendoli in un rettangolo. Le geometrie selezionatie cambiano colore (valore predefinito: giallo) al rilascio del mouse.</translation>
    </message>
    <message>
      <source>Display the About QGIS dialog. About QGIS contains information about the current version, contributors, and available data provider plugins.</source>
      <translation>Mostra una finestra con informazioni su QGIS. Le informazioni disponibili sono: numero della versione in uso, nomi delle persone che hanno contribuito al progetto e l'elenco dei plugin disponibili.</translation>
    </message>
    <message>
      <source>Add a vector layer to the map canvas. The supported formats are those provided by the OGR library. For a list of supported formats, see http://www.remotesensing.org/gdal/ogr/ogr_formats.html</source>
      <translation>Aggiunge un vettoriale alla mappa. I formati supportati sono quelli messi a disposizione dalle librerie OGR. 
La lista è reperibile alla pagina:
http://www.remotesensing.org/gdal/ogr/ogr_formats.html</translation>
    </message>
    <message>
      <source>Open the attribute table for the selected vector layer. The rows can be sorted by clicking on the column names in the header row.</source>
      <translation>Visualizza gli attributi del vettoriale selezionato. Le righe della tabella possono essere ordinate clickando sulla colonna di intestazione.</translation>
    </message>
    <message>
      <source>Zoom to the last view. QGIS stores only one previous view so repeatedly clicking this button swaps the views.</source>
      <translation>Porta la mappa all'ultima operazione fatta sull'inquadramento. QGIS tiene memoria solo dell'ultima vista, pertanto un click ripetuto su questo bottone non fa altro che invertire le ultime due operazioni di zoom.</translation>
    </message>
    <message>
      <source>Open the options dialog to set QGIS preferences like web browser and identify search radius.</source>
      <translation>Apre la finestra delle impostazioni di QGIS in modo da poter scegliere il brower predefinito e il raggio di ricerca per identificare gli oggetti.</translation>
    </message>
    <message>
      <source>Save the current map as a QGIS project. A QGIS project can later be opened and all layers and setting will be restored.</source>
      <translation>Salva lo stato attuale della mappa come progetto QIGS. Un progetto QGIS può essere utilizzato per poter riottenere lo stesso stato della mappa (layer caricati e relativi stili di rappresentazione) in un successivo uso dell'applicazione.</translation>
    </message>
    <message>
      <source>Save the current map as a new QGIS project. A QGIS project can later be opened and all layers and setting will be restored.</source>
      <translation>Salva la mappa attualmente in uso come nuovo progetto QGIS. Un progetto può essere utilizzato per poter riottenere lo stesso stato della mappa  (layer caricati e relativi stili di rappresentazione) in un successivo uso dell'applicazione.</translation>
    </message>
    <message>
      <source>Create a new, empty QGIS project. All layers will be removed from the map canvas and a blank canvas will be created.</source>
      <translation>Crea un nuovo progetto QGIS. Tutti i layer caricati vengono rimossi per poter creare una nuova mappa.</translation>
    </message>
    <message>
      <source>Opens the Plugin Manager and allows you to view loaded plugins or load a new one. The Plugin Manager lists the available plugins and a description of the features each provides.</source>
      <translation>Apre il manager di gestione dei plugin. Ogni plugin può essere attivato o disattivato. Il manager di gestione dei plugin mostra lista di quelli disponibili ed una descrizione delle caratteristiche di ciascuno di essi.</translation>
    </message>
    <message>
      <source>Contacts the QGIS version server and provides information about the current version and any new features/changes available in the development version.</source>
      <translation>Interroga il server con le versioni di QGIS e visualizza le informazioni in merito alla versione attualmente in uso e nuove caratteristiche e/o cambiamenti presenti nella versione in via di sviluppo.</translation>
    </message>
    <message>
      <source>Creates a Mapserver file (.map) from the current QGIS view. The .map file can be used to create a Mapserver project.</source>
      <translation>Crea un file Mapserver (.map) in base allo stato della mappa QGIS. Il file creato può essere utilizzato come file di configurazione di Mapserver</translation>
    </message>
    <message>
      <source>Adds a raster layer to the map canvas. Supported raster formats include most of those provided by the GDAL library. See http://www.remotesensing.org/gdal/formats_list.html</source>
      <translation>Aggiunge un raster alla mappa. 
I formati supportati sono quelli resi delle librerie GDAL. 
La lista è reperibile al sito: 
http://www.remotesensing.org/gdal/formats_list.html</translation>
    </message>
    <message>
      <source>Open the QGIS Help Contents in a web browser</source>
      <translation>Apre l'aiuto contestuale di QGIS in un browser.</translation>
    </message>
    <message>
      <source>Open the QGIS home page in a web browser</source>
      <translation>Apre la pagina web principale di QGIS in un browser.</translation>
    </message>
    <message>
      <source>Open the QGIS SourceForge project page in a web browser</source>
      <translation>Apre la pagina di progetto di QGIS su SourceForge in un browser</translation>
    </message>
    <message>
      <source>Save the current map view as a PNG image. The image size will be exactly the same as the size of the map canvas.</source>
      <translation>Salva lo stato attuale della mappa come immagine PNG. Le dimensioni sono le stesse dell'area occupata dalla mappa dell'applicazione.</translation>
    </message>
    <message>
      <source>Whats this?</source>
      <translation>Di cosa si tratta?</translation>
    </message>
    <message>
      <source>Whats this? - Click this tool and then click on a toolbar button or menu item to get more information</source>
      <translation>Di cosa si tratta? -Facendo click su questo bottone e successivamente su un bottone di una barra strumenti o di una voce di menu si ottengono maggiori informazioni</translation>
    </message>
    <message>
      <source>Project Properties</source>
      <translation>Proprietà del progetto</translation>
    </message>
    <message>
      <source>Set project properties, including map units</source>
      <translation>Cambia le proprietà del progetto, compresa l'unità di misura usata nella mappa</translation>
    </message>
    <message>
      <source>Set properties for the current project, including map units</source>
      <translation>Cambia le proprietà del progetto attualmente in uso, compresa l'unità di misura</translation>
    </message>
    <message>
      <source>&amp;File</source>
      <translation>&amp;File</translation>
    </message>
    <message>
      <source>&amp;Layer</source>
      <translation>&amp;layer</translation>
    </message>
    <message>
      <source>&amp;View</source>
      <translation>&amp;Visualizza</translation>
    </message>
    <message>
      <source>&amp;Open Project</source>
      <translation>&amp;Apri Progetto</translation>
    </message>
    <message>
      <source>Ctrl+O</source>
      <translation>Ctrl+O</translation>
    </message>
    <message>
      <source>Add a &amp;PostGIS Layer</source>
      <translation>Aggiungi un vettoriale &amp;PostGIS</translation>
    </message>
    <message>
      <source>&amp;Refresh </source>
      <translation>&amp;Aggiorna </translation>
    </message>
    <message>
      <source>Zoom to &amp;full extent</source>
      <translation>Zoom all' &amp;estensione massima</translation>
    </message>
    <message>
      <source>Zoom in</source>
      <translation>Aumenta lo zoom</translation>
    </message>
    <message>
      <source>Zoom &amp;Out</source>
      <translation>Diminuisci lo z&amp;oom</translation>
    </message>
    <message>
      <source>&amp;Zoom to selected features</source>
      <translation>&amp;Zoom sulle geometrie selezionate</translation>
    </message>
    <message>
      <source>I&amp;dentify</source>
      <translation>I&amp;dentifica</translation>
    </message>
    <message>
      <source>Add a &amp;Vector Layer</source>
      <translation>Aggiungi un &amp;Vettoriale</translation>
    </message>
    <message>
      <source>&amp;Attribute table</source>
      <translation>Tabella &amp;attributi</translation>
    </message>
    <message>
      <source>Previous</source>
      <translation>Precedente</translation>
    </message>
    <message>
      <source>Zoom to &amp;previous extent</source>
      <translation>Zoom all'estensione &amp;precedente</translation>
    </message>
    <message>
      <source>&amp;Preferences</source>
      <translation>&amp;Preferenze</translation>
    </message>
    <message>
      <source>&amp;Save Project</source>
      <translation>&amp;Salva progetto</translation>
    </message>
    <message>
      <source>Ctrl+S</source>
      <translation>Ctrl+S</translation>
    </message>
    <message>
      <source>Save Project &amp;As...</source>
      <translation>Salva Progetto con &amp;nome...</translation>
    </message>
    <message>
      <source>New Project</source>
      <translation>Nuovo Progetto</translation>
    </message>
    <message>
      <source>&amp;New Project</source>
      <translation>&amp;Nuovo progetto</translation>
    </message>
    <message>
      <source>Ctrl+N</source>
      <translation>Ctrl+N </translation>
    </message>
    <message>
      <source>Plugin &amp;Manager</source>
      <translation>Gestore &amp;Plugin</translation>
    </message>
    <message>
      <source>Check QGIS &amp;Version</source>
      <translation>Controlla la &amp;Versione di QGIS</translation>
    </message>
    <message>
      <source>Export As Mapserver file</source>
      <translation>Esporta come file Mapserver</translation>
    </message>
    <message>
      <source>Export As &amp;Mapserver file</source>
      <translation>Esporta come file &amp;Mapserver</translation>
    </message>
    <message>
      <source>Add a &amp;Raster Layer</source>
      <translation>Aggiungi un &amp;Raster</translation>
    </message>
    <message>
      <source>Export As Image</source>
      <translation>Esporta come immagine</translation>
    </message>
    <message>
      <source>&amp;Whats this?</source>
      <translation>&amp;Di cosa si tratta?</translation>
    </message>
    <message>
      <source>Shift+F1</source>
      <translation>Shift+F1</translation>
    </message>
    <message>
      <source>Properties</source>
      <translation>Proprietà</translation>
    </message>
    <message>
      <source>&amp;Properties</source>
      <translation>&amp;Proprietà</translation>
    </message>
    <message>
      <source>Zoom to layer</source>
      <translation>Zoom alle dimensioni del layer</translation>
    </message>
    <message>
      <source>Zoom to &amp;layer</source>
      <translation>Zoom estensione &amp;layer</translation>
    </message>
    <message>
      <source>Print</source>
      <translation>Stampa</translation>
    </message>
    <message>
      <source>&amp;Print</source>
      <translation>Stam&amp;pa</translation>
    </message>
    <message>
      <source>Ctrl+P</source>
      <translation>Ctrl+P</translation>
    </message>
    <message>
      <source>D</source>
      <translation>D</translation>
    </message>
    <message>
      <source>V</source>
      <translation>V</translation>
    </message>
    <message>
      <source>R</source>
      <translation>R</translation>
    </message>
    <message>
      <source>Capture Point</source>
      <translation>Inserisci punto</translation>
    </message>
    <message>
      <source>Add All To Overview</source>
      <translation>Aggiungi tutto alla vista panoramica</translation>
    </message>
    <message>
      <source>+</source>
      <translation>+</translation>
    </message>
    <message>
      <source>Remove All From Overview</source>
      <translation>Rimuovi tutto dalla vista panoramica</translation>
    </message>
    <message>
      <source>-</source>
      <translation>-</translation>
    </message>
    <message>
      <source>Show All Layers</source>
      <translation>Mostra tutti i layer</translation>
    </message>
    <message>
      <source>S</source>
      <translation>M</translation>
    </message>
    <message>
      <source>Hide All Layers</source>
      <translation>Nascondi tutti i layer</translation>
    </message>
    <message>
      <source>H</source>
      <translation>N</translation>
    </message>
    <message>
      <source>Capture Line</source>
      <translation>Inserisci una linea</translation>
    </message>
    <message>
      <source>Capture Polygon</source>
      <translation>Inserisci un poligono</translation>
    </message>
    <message>
      <source>Map Edit Tools</source>
      <translation>Strumenti di edit della mappa</translation>
    </message>
    <message>
      <source>Show all layers</source>
      <translation>Mostra tutti i layer</translation>
    </message>
    <message>
      <source>Add to overview</source>
      <translation>Aggiungi alla vista panoramica</translation>
    </message>
    <message>
      <source>Capture points</source>
      <translation>Inserisci punti</translation>
    </message>
    <message>
      <source>Plugins Toolbar</source>
      <translation>Barra strumenti dei plugin</translation>
    </message>
    <message>
      <source>&amp;Settings</source>
      <translation>Impo&amp;stazioni</translation>
    </message>
    <message>
      <source>&amp;Export As Image</source>
      <translation>Salva immagin&amp;e</translation>
    </message>
    <message>
      <source>P&amp;roject Properties</source>
      <translation>P&amp;roiezione</translation>
    </message>
    <message>
      <source>Remove Layer</source>
      <translation>Elimina layer</translation>
    </message>
    <message>
      <source>Toggle In Overview</source>
      <translation>Abilita nella panoramica</translation>
    </message>
    <message>
      <source>New Vectorlayer</source>
      <translation>Nuovo vettoriale</translation>
    </message>
    <message>
      <source>Bookmarks Toolbar</source>
      <translation>Barra strumenti dei bookmark</translation>
    </message>
    <message>
      <source>Capture (digitise) a point on the current layer. The layer must be in edit mode.</source>
      <translation>Digitalizzazione di un punto sul vettoriale. attivo. Il vettoriale deve essere in modalità di inserimento.</translation>
    </message>
    <message>
      <source>Capture (digitise) a line on the current layer. The layer must be in edit mode.</source>
      <translation>Digitalizzazione di una linea sul vettoriale. attivo. Il vettoriale deve essere in modalità di inserimento.</translation>
    </message>
    <message>
      <source>Capture (digitise) a polygon on the current layer. The layer must be in edit mode.</source>
      <translation>Digitalizzazione di un poligono sul vettoriale. attivo. Il vettoriale deve essere in modalità di inserimento.</translation>
    </message>
    <message>
      <source>Measure</source>
      <translation>Misura</translation>
    </message>
    <message>
      <source>Measure distances on the map canvas.</source>
      <translation>Misura le distanza sull'area mappa</translation>
    </message>
    <message>
      <source>Ctrl+M</source>
      <translation>Ctrl+M</translation>
    </message>
    <message>
      <source>Properties for the selected layer, including rendering and projection settings.</source>
      <translation>Proprietà per il layer selezionato, incluse le modalità di rendering e di proiezione.</translation>
    </message>
    <message>
      <source>Zoom to the extent of the active layer</source>
      <translation>Zoom all'estensione del layer attivo</translation>
    </message>
    <message>
      <source>Open the Map Composer to create and print a map using the current layers and settings.</source>
      <translation>Apri il Map Composer per creare e stampare una mappa che fa uso dei layer attivi e relativa configurazione.</translation>
    </message>
    <message>
      <source>Add all layers to the overview map.</source>
      <translation>Aggiungi tutti i layer alla mappa panoramica</translation>
    </message>
    <message>
      <source>Remove all layers to the overview map.</source>
      <translation>Rimuovi tutti i layer dalla mappa panoramica</translation>
    </message>
    <message>
      <source>Toggle the visibility of all layers to on and redraw the map.</source>
      <translation>Cambia lo stato di visibilità di tutti i layer e ridisegna la mappa.</translation>
    </message>
    <message>
      <source>Toggle the visibility of all layers to off and clear the map.</source>
      <translation>Rendi invisibili tutti i layer e pulisci la mappa</translation>
    </message>
    <message>
      <source>Remove the active layer from the map.</source>
      <translation>Rimuovi il layer attivo della mappa</translation>
    </message>
    <message>
      <source>Add or remove the active layer to the Overview map.</source>
      <translation>Aggiungi o rimuovi il layer attivo nella mappa panoramica.</translation>
    </message>
    <message>
      <source>Create a new vector layer (shapefile) for editing.</source>
      <translation>Crea un nuovo vettoriale (shapefile) per la modifica</translation>
    </message>
    <message>
      <source>DebugHook</source>
      <translation>DebugHook</translation>
    </message>
    <message>
      <source>DebugHook to which random stuff can be attached</source>
      <translation>DebugHook per vedere quale staff casuale può essere allegato</translation>
    </message>
    <message>
      <source>Custom Projections</source>
      <translation>Proiezioni personalizzate</translation>
    </message>
    <message>
      <source>Create or manage custom projection definitions.</source>
      <translation>Crea o gestisce delle definizioni personali di proiezioni.</translation>
    </message>
    <message>
      <source>Show geospatial bookmarks</source>
      <translation>Visualizza i segnalibri geospaziali</translation>
    </message>
    <message>
      <source>Geospatial bookmarks...</source>
      <translation>Segnalibri geospaziali...</translation>
    </message>
    <message>
      <source>Show the spatial bookmarks dialog and zoom to a bookmark or delete unwanted bookmarks.</source>
      <translation>Visualizza la finestra di dialogo dei segnalibri geospaziali per zoomare su un segnalibro o eliminare segnalibri non voluti.</translation>
    </message>
    <message>
      <source>Create a new geospatial bookmark</source>
      <translation>Crea un nuovo segnalibro geospaziale</translation>
    </message>
    <message>
      <source>New geospatial bookmark...</source>
      <translation>Nuovo segnalibro geospaziale...</translation>
    </message>
    <message>
      <source>Create a new geospatial bookmark for the current view</source>
      <translation>Crea un nuovo segnalibro geospaziale dalla vista in uso</translation>
    </message>
    <message>
      <source>Ctrl+B</source>
      <translation>Ctrl+B</translation>
    </message>
    <message>
      <source>Create a new geospatial bookmark for the current view extent.</source>
      <translation>Crea un nuovo segnalibro geospaziale a partire dall'estensione della vista attuale</translation>
    </message>
  </context>
  <context>
    <name>QgsAbout</name>
    <message>
      <source>About Quantum GIS</source>
      <translation>Informazioni su Quantum GIS</translation>
    </message>
    <message>
      <source>Ok</source>
      <translation>Ok</translation>
    </message>
    <message>
      <source>About</source>
      <translation>Informazioni</translation>
    </message>
    <message>
      <source>Version</source>
      <translation>Versione</translation>
    </message>
    <message>
      <source>What's New</source>
      <translation>Novità</translation>
    </message>
    <message>
      <source>Contributors</source>
      <translation>Collaboratori</translation>
    </message>
    <message>
      <source>&lt;h2>QGIS Contributors&lt;/h2></source>
      <translation>&lt;h2>Collaboratori QGIS&lt;/h2></translation>
    </message>
    <message>
      <source>&lt;h2>Quantum GIS (qgis)&lt;/h2></source>
      <translation>&lt;h2>Quantum GIS (qgis)&lt;/h2></translation>
    </message>
    <message>
      <source>QGIS Home Page</source>
      <translation>QGIS Home Page</translation>
    </message>
    <message>
      <source>Subscribe to the QGIS-User mailing list</source>
      <translation>Iscriviti alla mailing list degli utenti QGIS</translation>
    </message>
    <message>
      <source>Providers</source>
      <translation>Fornitori dati</translation>
    </message>
    <message>
      <source>&lt;p align=&quot;center&quot;>Quantum GIS is licensed under the GNU General Public License&lt;p>
&lt;p align=&quot;center&quot;>http://www.gnu.org/licenses&lt;/p></source>
      <translation>&lt;p align=&quot;center&quot;>Quantum GIS è distribuito sotto licenza GNU General Public License&lt;p>
&lt;p align=&quot;center&quot;>http://www.gnu.org/licenses&lt;/p></translation>
    </message>
  </context>
  <context>
    <name>QgsAddAttrDialogBase</name>
    <message>
      <source>Add Attribute</source>
      <translation>Aggiungi attributo</translation>
    </message>
    <message>
      <source>Name:</source>
      <translation>Nome:</translation>
    </message>
    <message>
      <source>Type:</source>
      <translation>Tipo:</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
  </context>
  <context>
    <name>QgsAttributeActionDialogBase</name>
    <message>
      <source>Form1</source>
      <translation>Form1</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Action</source>
      <translation>Azione</translation>
    </message>
    <message>
      <source>Move up</source>
      <translation>Sposta in su</translation>
    </message>
    <message>
      <source>Move the selected action up</source>
      <translation>Sposta l'azione selezionata in su</translation>
    </message>
    <message>
      <source>Move down</source>
      <translation>Sposta in giù</translation>
    </message>
    <message>
      <source>Move the selected action down</source>
      <translation>Sposta l'azione selezionata in giù</translation>
    </message>
    <message>
      <source>Remove</source>
      <translation>Rimuovi</translation>
    </message>
    <message>
      <source>Remove the selected action</source>
      <translation>Rimuovi l'azione selezionata</translation>
    </message>
    <message>
      <source>Name:</source>
      <translation>Nome:</translation>
    </message>
    <message>
      <source>Enter the name of an action here. The name should be unique (qgis will make it unique if necessary).</source>
      <translation>Inserire qui il nome dell'azione. Il nome deve essere univoco (QGIS lo rende tale se necessario).</translation>
    </message>
    <message>
      <source>Enter the action name here</source>
      <translation>Nome d'assegnare all'azione</translation>
    </message>
    <message>
      <source>Action:</source>
      <translation>Azione:</translation>
    </message>
    <message>
      <source>Enter the action command here</source>
      <translation>Inserire il comando dell'azione</translation>
    </message>
    <message>
      <source>Browse</source>
      <translation>Sfoglia</translation>
    </message>
    <message>
      <source>Browse for action commands</source>
      <translation>Cerca il comando per l'azione</translation>
    </message>
    <message>
      <source>Insert action</source>
      <translation>Inserire l'azione</translation>
    </message>
    <message>
      <source>Inserts the action into the list above</source>
      <translation>Inserire l'azione in questa lista</translation>
    </message>
    <message>
      <source>Update action</source>
      <translation>Aggiorna azione</translation>
    </message>
    <message>
      <source>Update the selected action</source>
      <translation>Aggiorna l'azione selezionata</translation>
    </message>
    <message>
      <source>Insert field</source>
      <translation>Inserisci campo</translation>
    </message>
    <message>
      <source>Inserts the selected field into the action, prepended with a %</source>
      <translation>Inserisci il campo selezionato nell'azione preceduto con il simbolo %</translation>
    </message>
    <message>
      <source>The valid attribute names for this layer</source>
      <translation>Nomi degli attributi valiti per questo vettoriale</translation>
    </message>
    <message>
      <source>This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Insert action button. Actions can be edited here by double clicking on the item.</source>
      <translation>Questa lista contiene tutte le azioni che sono stato definito per il vettoriale in uso. Per aggiungere un'azione è sufficente fare click sul bottone Aggiungi qui sotto. La azioni possono essere modificate facendo doppio click su di esse.</translation>
    </message>
    <message>
      <source>Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if preceeded by a backslash</source>
      <translation>Inserisci l'azione qui. Questo può essere un programma o uno script o un comando presenti sul tuo sistema. Quando l'azione viene invocata tutti i caratteri che cominciano con il simbolo % e che hanno nome uguale al campo vengono sostituiti con il valore contenuto nel relativo campo. Il carattere speciale %% sostituisce il valore del campo che è stato selezionato. Le doppie virgolette marcano una parte di testo come singolo argomento per il programma, script o comando. Le doppie virgolette vengono ignorate se precedute da un backslash.</translation>
    </message>
    <message>
      <source>Capture</source>
      <translation>Digitalizza</translation>
    </message>
    <message>
      <source>Capture output</source>
      <translation>Digitalizza l'output</translation>
    </message>
    <message>
      <source>Captures any output from the action</source>
      <translation>Digitalizza ogni output dall'azione</translation>
    </message>
    <message>
      <source>Captures the standard output or error generated by the action and displays it in a dialog box</source>
      <translation>Gli output di digitalizzazione fatti da l'azione (sia standard che errori) saranno visualizzati in una finestra di dialogo </translation>
    </message>
  </context>
  <context>
    <name>QgsAttributeDialogBase</name>
    <message>
      <source>Enter Attribute Values</source>
      <translation>Inserisci i valori dell'attributo</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
  </context>
  <context>
    <name>QgsAttributeTable</name>
    <message>
      <source>&lt;center>Run action&lt;/center></source>
      <translation>&lt;center>Esegui azione&lt;/center></translation>
    </message>
  </context>
  <context>
    <name>QgsAttributeTableBase</name>
    <message>
      <source>Attribute Table</source>
      <translation>Tabella attributi</translation>
    </message>
    <message>
      <source>Start editing</source>
      <translation>Abilita modifica</translation>
    </message>
    <message>
      <source>Stop editing</source>
      <translation>Interrompi modifica</translation>
    </message>
    <message>
      <source>&amp;Close</source>
      <translation>&amp;Chiudi</translation>
    </message>
    <message>
      <source>Alt+C</source>
      <translation>Alt+C</translation>
    </message>
    <message>
      <source>Ctrl+X</source>
      <translation>Ctrl+X</translation>
    </message>
    <message>
      <source>Delete attribute</source>
      <translation>Elimina attributo</translation>
    </message>
    <message>
      <source>Ctrl+N</source>
      <translation>Ctrl+N </translation>
    </message>
    <message>
      <source>New attribute</source>
      <translation>Nuovo attributo</translation>
    </message>
    <message>
      <source>Ctrl+S</source>
      <translation>Ctrl+S</translation>
    </message>
    <message>
      <source>Invert selection</source>
      <translation>Inverti selezione</translation>
    </message>
    <message>
      <source>Ctrl+T</source>
      <translation>Ctrl+T</translation>
    </message>
    <message>
      <source>Move selected to top</source>
      <translation>Muovi selezione in alto</translation>
    </message>
    <message>
      <source>Remove selection</source>
      <translation>Rimuovi selezione</translation>
    </message>
  </context>
  <context>
    <name>QgsBookmarks</name>
    <message>
      <source>Really Delete?</source>
      <translation>Vuoi cancellare veramente?</translation>
    </message>
    <message>
      <source>&amp;Yes</source>
      <translation>&amp;Sì</translation>
    </message>
    <message>
      <source>&amp;No</source>
      <translation>&amp;No</translation>
    </message>
  </context>
  <context>
    <name>QgsBookmarksBase</name>
    <message>
      <source>Geospatial Bookmarks</source>
      <translation>Segnalibri geospaziali</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Project</source>
      <translation>Proiezione</translation>
    </message>
    <message>
      <source>Extent</source>
      <translation>Estensione</translation>
    </message>
    <message>
      <source>Id</source>
      <translation>Id</translation>
    </message>
    <message>
      <source>Zoom To</source>
      <translation>Zoom a</translation>
    </message>
    <message>
      <source>Zoom to the currently selected bookmark</source>
      <translation>Zoom al segnalibro selezionato</translation>
    </message>
    <message>
      <source>Delete</source>
      <translation>Elimina</translation>
    </message>
    <message>
      <source>Delete the currently selected bookmark</source>
      <translation>Elimina il segnalibro selezionato</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
    <message>
      <source>Close the dialog</source>
      <translation>Chiude la finestra di dialogo</translation>
    </message>
  </context>
  <context>
    <name>QgsComposer</name>
    <message>
      <source>Choose a filename to save the map image as</source>
      <translation>Assegna un nome da dare all'immagine</translation>
    </message>
    <message>
      <source>Choose a filename to save the map as</source>
      <translation>Selezione un nome di file per salvare la mappa come</translation>
    </message>
  </context>
  <context>
    <name>QgsComposerBase</name>
    <message>
      <source>Map Composer</source>
      <translation>Map Composer</translation>
    </message>
    <message>
      <source>General</source>
      <translation>Generale</translation>
    </message>
    <message>
      <source>Composition</source>
      <translation>Composizione</translation>
    </message>
    <message>
      <source>Item</source>
      <translation>Oggetto</translation>
    </message>
    <message>
      <source>Toolbar_2</source>
      <translation>Barrastrumenti_2</translation>
    </message>
    <message>
      <source>Toolbar</source>
      <translation>Barra degli strumenti</translation>
    </message>
    <message>
      <source>Tools</source>
      <translation>Strumenti</translation>
    </message>
    <message>
      <source>Open Template</source>
      <translation>Apri modello</translation>
    </message>
    <message>
      <source>&amp;Open Template ...</source>
      <translation>&amp;Apri modello ...</translation>
    </message>
    <message>
      <source>Ctrl+O</source>
      <translation>Ctrl+O</translation>
    </message>
    <message>
      <source>Save Template As</source>
      <translation>Salva il modello come</translation>
    </message>
    <message>
      <source>Save Template &amp;As...</source>
      <translation>S&amp;alva il modello come...</translation>
    </message>
    <message>
      <source>Print</source>
      <translation>Stampa</translation>
    </message>
    <message>
      <source>&amp;Print...</source>
      <translation>Stam&amp;pa...</translation>
    </message>
    <message>
      <source>Ctrl+P</source>
      <translation>Ctrl+P</translation>
    </message>
    <message>
      <source>Action</source>
      <translation>Azione</translation>
    </message>
    <message>
      <source>Add new map</source>
      <translation>Aggiungi nuova mappa</translation>
    </message>
    <message>
      <source>Add new label</source>
      <translation>Aggiungi nuova etichetta</translation>
    </message>
    <message>
      <source>Add new vect legend</source>
      <translation>Aggiungi nuova legenda vettoriale</translation>
    </message>
    <message>
      <source>Select/Move item</source>
      <translation>Selezione/Sposta oggetto</translation>
    </message>
    <message>
      <source>Export as image</source>
      <translation>Esporta come immagine</translation>
    </message>
    <message>
      <source>Export as SVG</source>
      <translation>Esporta come SVG</translation>
    </message>
    <message>
      <source>Add new scalebar</source>
      <translation>Aggiungi nuova barra di scala</translation>
    </message>
    <message>
      <source>Refresh view</source>
      <translation>Aggiorna la vista</translation>
    </message>
  </context>
  <context>
    <name>QgsComposerLabelBase</name>
    <message>
      <source>Label Options</source>
      <translation>Opzioni etichetta</translation>
    </message>
    <message>
      <source>Font</source>
      <translation>Carattere</translation>
    </message>
    <message>
      <source>Box</source>
      <translation>Rettangolo</translation>
    </message>
  </context>
  <context>
    <name>QgsComposerMap</name>
    <message>
      <source>Map %d</source>
      <translation>Mappa %d</translation>
    </message>
    <message>
      <source>Extent (calculate scale)</source>
      <translation>Estensione (calcola scala)</translation>
    </message>
    <message>
      <source>Scale (calculate extent)</source>
      <translation>Scala (calcola estensione)</translation>
    </message>
  </context>
  <context>
    <name>QgsComposerMapBase</name>
    <message>
      <source>Map options</source>
      <translation>Opzioni mappa</translation>
    </message>
    <message>
      <source>&lt;b>Map&lt;/b></source>
      <translation>&lt;b>Mappa&lt;/b></translation>
    </message>
    <message>
      <source>Set</source>
      <translation>Definisci</translation>
    </message>
    <message>
      <source>Width</source>
      <translation>Larghezza</translation>
    </message>
    <message>
      <source>Height</source>
      <translation>Altezza</translation>
    </message>
    <message>
      <source>Scale</source>
      <translation>Scala</translation>
    </message>
    <message>
      <source>1 :</source>
      <translation>1 :</translation>
    </message>
    <message>
      <source>Set Extent</source>
      <translation>Definisci estensione</translation>
    </message>
    <message>
      <source>Set map extent to current extent in QGIS map canvas</source>
      <translation>Cambia l'estensione della mappa alle dimensioni dell'area mappa di QGIS</translation>
    </message>
    <message>
      <source>Line width scale</source>
      <translation>Larghezza della linea di scala</translation>
    </message>
    <message>
      <source>Width of one unit in millimeters</source>
      <translation>Larghezza di una unità in millimetri</translation>
    </message>
    <message>
      <source>Symbol scale</source>
      <translation>Scala simbolo</translation>
    </message>
    <message>
      <source>Font size scale</source>
      <translation>Dimensioni carattere di scala</translation>
    </message>
    <message>
      <source>Frame</source>
      <translation>Cornice</translation>
    </message>
    <message>
      <source>Preview</source>
      <translation>Anteprima</translation>
    </message>
  </context>
  <context>
    <name>QgsComposerScalebarBase</name>
    <message>
      <source>Barscale Options</source>
      <translation>Opzioni barra di scala</translation>
    </message>
    <message>
      <source>Segment size</source>
      <translation>Dimensione segmento</translation>
    </message>
    <message>
      <source>Number of segments</source>
      <translation>Numero di segmenti</translation>
    </message>
    <message>
      <source>Map units per scalebar unit</source>
      <translation>Unità mappa per unità di barra di scala</translation>
    </message>
    <message>
      <source>Unit label</source>
      <translation>Unità etichetta</translation>
    </message>
    <message>
      <source>Map</source>
      <translation>Mappa</translation>
    </message>
    <message>
      <source>Font</source>
      <translation>Carattere</translation>
    </message>
    <message>
      <source>Line width</source>
      <translation>Spessore linea</translation>
    </message>
  </context>
  <context>
    <name>QgsComposerVectorLegend</name>
    <message>
      <source>Layers</source>
      <translation>layer</translation>
    </message>
    <message>
      <source>Group</source>
      <translation>Gruppo</translation>
    </message>
  </context>
  <context>
    <name>QgsComposerVectorLegendBase</name>
    <message>
      <source>Vector Legend Options</source>
      <translation>Opzioni legenda vettoriale</translation>
    </message>
    <message>
      <source>Title</source>
      <translation>Titolo</translation>
    </message>
    <message>
      <source>Map</source>
      <translation>Mappa</translation>
    </message>
    <message>
      <source>Font</source>
      <translation>Carattere</translation>
    </message>
    <message>
      <source>Box</source>
      <translation>Rettangolo</translation>
    </message>
    <message>
      <source>Column 1</source>
      <translation>Colonna 1</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
    <message>
      <source>Preview</source>
      <translation>Anteprima</translation>
    </message>
  </context>
  <context>
    <name>QgsComposition</name>
    <message>
      <source>Custom</source>
      <translation>Personale</translation>
    </message>
    <message>
      <source>A5 (148x210 mm)</source>
      <translation>A5  (148x210 mm)</translation>
    </message>
    <message>
      <source>A4 (210x297 mm)</source>
      <translation>A4  (210x297 mm)</translation>
    </message>
    <message>
      <source>A3 (297x420 mm)</source>
      <translation>A3 (297x420 mm)</translation>
    </message>
    <message>
      <source>A2 (420x594 mm)</source>
      <translation>A2 (420x594 mm)</translation>
    </message>
    <message>
      <source>A1 (594x841 mm)</source>
      <translation>A1 (594x841 mm)</translation>
    </message>
    <message>
      <source>A0 (841x1189 mm)</source>
      <translation>A0 (841x1189 mm)</translation>
    </message>
    <message>
      <source>B5 (176 x 250 mm)</source>
      <translation>B5 (176 x 250 mm)</translation>
    </message>
    <message>
      <source>B4 (250 x 353 mm)</source>
      <translation>B4 (250 x 353 mm)</translation>
    </message>
    <message>
      <source>B3 (353 x 500 mm)</source>
      <translation>B3 (353 x 500 mm)</translation>
    </message>
    <message>
      <source>B2 (500 x 707 mm)</source>
      <translation>B2 (500 x 707 mm)</translation>
    </message>
    <message>
      <source>B1 (707 x 1000 mm)</source>
      <translation>B1 (707 x 1000 mm)</translation>
    </message>
    <message>
      <source>B0 (1000 x 1414 mm)</source>
      <translation>B0 (1000 x 1414 mm)</translation>
    </message>
    <message>
      <source>Letter (8.5x11 inches)</source>
      <translation>Letter (8.5x11 inches)</translation>
    </message>
    <message>
      <source>Legal (8.5x14 inches)</source>
      <translation>Legal (8.5x14 inches)</translation>
    </message>
    <message>
      <source>Portrait</source>
      <translation>Verticale</translation>
    </message>
    <message>
      <source>Landscape</source>
      <translation>Orizzontale</translation>
    </message>
  </context>
  <context>
    <name>QgsCompositionBase</name>
    <message>
      <source>Composition</source>
      <translation>Composizione</translation>
    </message>
    <message>
      <source>Paper</source>
      <translation>Carta</translation>
    </message>
    <message>
      <source>Size</source>
      <translation>Dimensione</translation>
    </message>
    <message>
      <source>Units</source>
      <translation>Unità</translation>
    </message>
    <message>
      <source>Width</source>
      <translation>Larghezza</translation>
    </message>
    <message>
      <source>Height</source>
      <translation>Altezza</translation>
    </message>
    <message>
      <source>Orientation</source>
      <translation>Direzione</translation>
    </message>
    <message>
      <source>Resolution (dpi)</source>
      <translation>Risoluzione (dpi)</translation>
    </message>
  </context>
  <context>
    <name>QgsConnectionDialogBase</name>
    <message>
      <source>Connection Information</source>
      <translation>Informazioni connessione</translation>
    </message>
    <message>
      <source>Host</source>
      <translation>Nome del server</translation>
    </message>
    <message>
      <source>Database</source>
      <translation>Database</translation>
    </message>
    <message>
      <source>Username</source>
      <translation>Nome utente</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Name of the new connection</source>
      <translation>Nome per una nuova connessione</translation>
    </message>
    <message>
      <source>Password</source>
      <translation>Password</translation>
    </message>
    <message>
      <source>Test Connect</source>
      <translation>Prova connessione</translation>
    </message>
    <message>
      <source>Save Password</source>
      <translation>Salva password</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Cancella</translation>
    </message>
    <message>
      <source>Help</source>
      <translation>Aiuto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>Create a New PostGIS connection</source>
      <translation>Crea una nuova connessione PostGIS</translation>
    </message>
    <message>
      <source>Port</source>
      <translation>Porta</translation>
    </message>
    <message>
      <source>5432</source>
      <translation>5432</translation>
    </message>
  </context>
  <context>
    <name>QgsContColDialogBase</name>
    <message>
      <source>Continuous color</source>
      <translation>Colore continuo</translation>
    </message>
    <message>
      <source>Classification Field:</source>
      <translation>Campo classificazione:</translation>
    </message>
    <message>
      <source>Minimum Value:</source>
      <translation>Valore minimo:</translation>
    </message>
    <message>
      <source>Maximum Value:</source>
      <translation>Valore massimo:</translation>
    </message>
    <message>
      <source>Outline Width:</source>
      <translation>Larghezza del tratto del riquadro</translation>
    </message>
    <message>
      <source>...</source>
      <translation>...</translation>
    </message>
  </context>
  <context>
    <name>QgsContextHelpBase</name>
    <message>
      <source>Help</source>
      <translation>Aiuto</translation>
    </message>
    <message>
      <source>&amp;Close</source>
      <translation>&amp;Chiudi</translation>
    </message>
    <message>
      <source>Alt+C</source>
      <translation>Alt+C</translation>
    </message>
  </context>
  <context>
    <name>QgsCoordinateTransform</name>
    <message>
      <source>Failed</source>
      <translation>Fallito</translation>
    </message>
    <message>
      <source>transform of</source>
      <translation>trasformazione di </translation>
    </message>
    <message>
      <source>with error: </source>
      <translation>con l'errore: </translation>
    </message>
  </context>
  <context>
    <name>QgsCopyrightLabelPluginGuiBase</name>
    <message>
      <source>Copyright Label Plugin</source>
      <translation>Etichetta di Copyright</translation>
    </message>
    <message>
      <source>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:10pt;font-family:helvetica&quot;>
&lt;p style=&quot;margin-top:18px&quot;>&lt;span style=&quot;font-size:19pt;font-weight:600&quot;>Description&lt;/span>&lt;/p>
&lt;p>Enter your copyright label below. This plugin supports basic html markup tags for formatting the label.  For example:&lt;/p>
&lt;p>&lt;span style=&quot;font-family:Courier New&quot;>&amp;lt;B&amp;gt; &lt;/span>&lt;span style=&quot;font-family:Courier New;font-weight:600&quot;>Bold text&lt;/span>&lt;span style=&quot;font-family:Courier New&quot;> &amp;lt;/B&amp;gt;&lt;br />&amp;lt;I&amp;gt; &lt;/span>&lt;span style=&quot;font-family:Courier New;font-style:italic&quot;>Italics&lt;/span>&lt;span style=&quot;font-family:Courier New&quot;> &amp;lt;/I&amp;gt;&lt;/span>&lt;/p>
&lt;/body>&lt;/html>
</source>
      <translation>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:10pt;font-family:helvetica&quot;> 
&lt;p style=&quot;margin-top:18px&quot;>&lt;span style=&quot;font-size:19pt;font-weight:600&quot;>Descrizione&lt;/span>&lt;/p> 
&lt;p> Inserisce una etichetta di copyright. Il testo dell'etichetta può essere formattato facendo uso dei tag html di base. Esempio:&lt;/p> 
&lt;p>&lt;span style=&quot;font-family:Courier New&quot;>&amp;lt;B&amp;gt;&lt;/span>&lt;span style=&quot;font-family:Courier New;font-weight:600&quot;>Testo marcato&lt;/span>&lt;span style=&quot;font-family:Courier New&quot;>&amp;lt;/B&amp;gt;&lt;br />&amp;lt;I&amp;gt;&lt;/span>&lt;span style=&quot;font-family:Courier New;font-style:italic&quot;>Italico&lt;/span>&lt;span style=&quot;font-family:Courier New&quot;>&amp;lt;/I&amp;gt;&lt;/span>&lt;/p>&lt;/body>&lt;/html></translation>
    </message>
    <message>
      <source>© QGIS 2004</source>
      <translation>@ QGIS 2004</translation>
    </message>
    <message>
      <source>Placement</source>
      <translation>Posizione</translation>
    </message>
    <message>
      <source>Bottom Left</source>
      <translation>In basso a sinistra</translation>
    </message>
    <message>
      <source>Top Left</source>
      <translation>In alto a sinistra</translation>
    </message>
    <message>
      <source>Bottom Right</source>
      <translation>In basso a destra</translation>
    </message>
    <message>
      <source>Top Right</source>
      <translation>In alto a destra</translation>
    </message>
    <message>
      <source>Orientation</source>
      <translation>Direzione</translation>
    </message>
    <message>
      <source>Horizontal</source>
      <translation>Orizzontale</translation>
    </message>
    <message>
      <source>Vertical</source>
      <translation>Verticale</translation>
    </message>
    <message>
      <source>Enable Copyright Label</source>
      <translation>Abilita etichetta di Copyright</translation>
    </message>
    <message>
      <source>&amp;OK</source>
      <translation>&amp;OK</translation>
    </message>
    <message>
      <source>Alt+O</source>
      <translation>Alt+O</translation>
    </message>
    <message>
      <source>&amp;Cancel</source>
      <translation>&amp;Annulla</translation>
    </message>
    <message>
      <source>Alt+C</source>
      <translation>Alt+C</translation>
    </message>
  </context>
  <context>
    <name>QgsCustomProjectionDialog</name>
    <message>
      <source>Delete Projection Definition?</source>
      <translation>Elimina definizione delle proiezione</translation>
    </message>
    <message>
      <source>Deleting a projection definition is not reversable. Do you want to delete it?</source>
      <translation>La cancellazione di un file progetto non è riversibile. Devo cancellarlo?</translation>
    </message>
    <message>
      <source>Abort</source>
      <translation>Abort</translation>
    </message>
    <message>
      <source>New</source>
      <translation>Nuovo</translation>
    </message>
    <message>
      <source>QGIS Custom Projection</source>
      <translation>QGIS Proiezione personalizzata</translation>
    </message>
    <message>
      <source>This proj4 projection definition is not valid. Please correct before pressing save.</source>
      <translation>Questa proiezione proj4 non è valida. Per piacere correggerla prma di premere salva. </translation>
    </message>
    <message>
      <source>This proj4 projection definition is not valid.</source>
      <translation>La proiezione proj4 non è valida</translation>
    </message>
    <message>
      <source>Northing and Easthing must be in decimal form.</source>
      <translation>Nord ed Est devono essere in cifre decimali.</translation>
    </message>
    <message>
      <source>Internal Error (source projection invalid?</source>
      <translation>Errore interno (sorgente della proiezione non valido?)</translation>
    </message>
  </context>
  <context>
    <name>QgsCustomProjectionDialogBase</name>
    <message>
      <source>Custom Projection Definition</source>
      <translation>Definizione di una proiezione personalizzata</translation>
    </message>
    <message>
      <source>Define</source>
      <translation>Definizione</translation>
    </message>
    <message>
      <source>Name:</source>
      <translation>Nome:</translation>
    </message>
    <message>
      <source>Projection Family:</source>
      <translation>Proiezione della famiglia:</translation>
    </message>
    <message>
      <source>Ellipsoid:</source>
      <translation>Elissoide:</translation>
    </message>
    <message>
      <source>Parameters:</source>
      <translation>Parametri:</translation>
    </message>
    <message>
      <source>Expected 
Parameters:</source>
      <translation>Parametri attesi:</translation>
    </message>
    <message>
      <source>|&lt;</source>
      <translation>|&lt;</translation>
    </message>
    <message>
      <source>&lt;</source>
      <translation>&lt;</translation>
    </message>
    <message>
      <source>1 of 1</source>
      <translation>1 di 1</translation>
    </message>
    <message>
      <source>></source>
      <translation>></translation>
    </message>
    <message>
      <source>>|</source>
      <translation>>|</translation>
    </message>
    <message>
      <source>New</source>
      <translation>Nuovo</translation>
    </message>
    <message>
      <source>Save</source>
      <translation>Salva</translation>
    </message>
    <message>
      <source>Delete</source>
      <translation>Elimina</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
    <message>
      <source>Test</source>
      <translation>Prova</translation>
    </message>
    <message>
      <source>Transform from WGS84 to the chosen projection</source>
      <translation>Trasforma da WGS84 alla proiezione selezionata</translation>
    </message>
    <message>
      <source>Calculate</source>
      <translation>Calcola</translation>
    </message>
    <message>
      <source>Projected Corrdinate System</source>
      <translation>Proiezione del sistema di coordinate</translation>
    </message>
    <message>
      <source>Geographic / WGS84</source>
      <translation>Geografica / WGS84</translation>
    </message>
    <message>
      <source>North:</source>
      <translation>Nord:</translation>
    </message>
    <message>
      <source>East:</source>
      <translation>Est:</translation>
    </message>
    <message>
      <source>Use the text boxes below to test the projection definition you are creating. Enter a coordinate where both the lat/long and the projected result are know (for example by reading off a map). Then press the calculate button to see if the projection definition you are creating is accurate.</source>
      <translation>Usa i box testuali per provare la proiezione create. Inserisci una coordinata in lat/long di cui conosci il risultato della proiezione (esempio leggendo una mappa). A quel punto premi il bottone di calcola per vedere se il sistema di proiezioni da te definito è corretto.</translation>
    </message>
  </context>
  <context>
    <name>QgsDbSourceSelect</name>
    <message>
      <source>Are you sure you want to remove the </source>
      <translation>Sicuro di voler rimuovere </translation>
    </message>
    <message>
      <source> connection and all associated settings?</source>
      <translation> inseriti tutti i parametri per la connessione?</translation>
    </message>
    <message>
      <source>Confirm Delete</source>
      <translation>Conferma eliminazione</translation>
    </message>
    <message>
      <source>Yes</source>
      <translation>Sì</translation>
    </message>
    <message>
      <source>No</source>
      <translation>No</translation>
    </message>
    <message>
      <source>Select Table</source>
      <translation>Seleziona tabella</translation>
    </message>
    <message>
      <source>You must select a table in order to add a Layer.</source>
      <translation>Prima di aggiungere un vettoriale occorre selezionare una tabella.</translation>
    </message>
    <message>
      <source>Password for </source>
      <translation>Password per </translation>
    </message>
    <message>
      <source>Please enter your password:</source>
      <translation>Prego inserisci la password</translation>
    </message>
    <message>
      <source>Connection failed</source>
      <translation>Connessione fallita</translation>
    </message>
    <message>
      <source>Connection to %1 on %2 failed. Either the database is down or your settings are incorrect.%3Check your username and password and try again.%4%5</source>
      <translation>Connessione fallita al database %1 per la tabella%2. Probabilmente il database server non è raggiungibile, oppure i parametri di connessione sono sbagliati. %3Controlla il tuo username e la password e prova ancora %4 %5</translation>
    </message>
    <message>
      <source>Access to relation </source>
      <translation>Accesso alla relazione </translation>
    </message>
    <message>
      <source> using sql;
</source>
      <translation> usando sql;</translation>
    </message>
    <message>
      <source>
has failed. The database said:
</source>
      <translation> è fallito. Il database dice: </translation>
    </message>
  </context>
  <context>
    <name>QgsDbSourceSelectBase</name>
    <message>
      <source>Add PostGIS Table(s)</source>
      <translation>Aggiungi tabella(e) PostGIS</translation>
    </message>
    <message>
      <source>Add</source>
      <translation>Aggiungi</translation>
    </message>
    <message>
      <source>Help</source>
      <translation>Aiuto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>Connect</source>
      <translation>Connetti</translation>
    </message>
    <message>
      <source>New</source>
      <translation>Nuovo</translation>
    </message>
    <message>
      <source>Edit</source>
      <translation>Modifica</translation>
    </message>
    <message>
      <source>Delete</source>
      <translation>Elimina</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
    <message>
      <source>PostgreSQL Connections</source>
      <translation>Connessioni PostgreSQL</translation>
    </message>
    <message>
      <source>Tables:</source>
      <translation>Tabelle:</translation>
    </message>
    <message>
      <source>Type</source>
      <translation>Tipo</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Sql</source>
      <translation>Sql</translation>
    </message>
    <message>
      <source>Encoding:</source>
      <translation>Codifica:</translation>
    </message>
  </context>
  <context>
    <name>QgsDelAttrDialogBase</name>
    <message>
      <source>Delete Attributes</source>
      <translation>Rimuovi attributi</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
  </context>
  <context>
    <name>QgsDlgVectorLayerProperties</name>
    <message>
      <source>Single Symbol</source>
      <translation>Stile singolo</translation>
    </message>
    <message>
      <source>Graduated Symbol</source>
      <translation>Stile graduato</translation>
    </message>
    <message>
      <source>Continuous Color</source>
      <translation>Colore continuo</translation>
    </message>
    <message>
      <source>Single Marker</source>
      <translation>Simbolo unico</translation>
    </message>
    <message>
      <source>Graduated Marker</source>
      <translation>Simbolo per classi</translation>
    </message>
    <message>
      <source>Unique Value</source>
      <translation>Valore unico</translation>
    </message>
    <message>
      <source>Unique Value Marker</source>
      <translation>Un simbolo per ogni valore</translation>
    </message>
    <message>
      <source>The source of the data (path name or database connection information)</source>
      <translation>Sorgente dei dati (nome del percorso o informazione della connessione del database)</translation>
    </message>
    <message>
      <source>This button opens the PostgreSQL query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer</source>
      <translation>Questo bottone esegue il costruttore di query PostgreSQL e permette di selezionare un sottoinsieme di geometrie, presenti nella tabella, da visualizzare nell'area dedicata alla mappa</translation>
    </message>
    <message>
      <source>The query used to limit the features in the layer is shown here. This is currently only supported for PostgreSQL layers. To enter or modify the query, click on the Query Builder button</source>
      <translation>La query utilizzata per individuare le geometrie del vettoriale è questa qui sotto. Attualmente il supporto è solo per i vettoriali PostgreSQL. Per cambiare la query, fa click sul bottone Costruttore di query</translation>
    </message>
    <message>
      <source>In order for QGIS to support SVG markers under Windows, we need to build QGIS</source>
      <translation>Per poter utilizzare il supporto per i simboli SVG su Windows, dobbiamo compilare QGIS</translation>
    </message>
    <message>
      <source> using the commercial version of Qt. As this project is developed by volunteers</source>
      <translation> utilizzando la versione commerciale delle QT. Questo progetto è portato avanti da volontari</translation>
    </message>
    <message>
      <source> donating their time, we don't have the financial resources to purchase Qt</source>
      <translation> che offrono il loro tempo libero, noi non abbiamo abbastanza risorse finanaziare per acquistare il pacchetto</translation>
    </message>
    <message>
      <source> commercial.  If you would like to help us, please visit the QGIS sourceforge</source>
      <translation> commerciale. Se ci vuoi aiutare visita il sito QGIS su sourceforge</translation>
    </message>
    <message>
      <source> home page to make a donation</source>
      <translation> e fa una donazione</translation>
    </message>
    <message>
      <source>No SVG Support</source>
      <translation>Mancato supporto SVG</translation>
    </message>
    <message>
      <source>Spatial Index</source>
      <translation>Indice spaziale</translation>
    </message>
    <message>
      <source>Creation of spatial index successfull</source>
      <translation>Creazione dell'indice spaziale avvenuta con successo</translation>
    </message>
    <message>
      <source>Creation of spatial index failed</source>
      <translation>Creazione dell'indice spaziale fallita</translation>
    </message>
    <message>
      <source>General:</source>
      <translation>Generale:</translation>
    </message>
    <message>
      <source>Geometry type of the features in this layer : </source>
      <translation>Tipo di geometria utilizzata dagli elementi presenti in questo vettoriale : </translation>
    </message>
    <message>
      <source>The number of features in this layer : </source>
      <translation>Numero di elementi in questo vettoriale : </translation>
    </message>
    <message>
      <source>Extents:</source>
      <translation>Estensione:</translation>
    </message>
    <message>
      <source>In layer spatial reference system units : </source>
      <translation>Unità del sistema di riferimento spaziale usato nel vettoriale : </translation>
    </message>
    <message>
      <source>xMin,yMin </source>
      <translation>xMin,yMin </translation>
    </message>
    <message>
      <source> : xMax,yMax </source>
      <translation> : xMax,yMax </translation>
    </message>
    <message>
      <source>In project spatial reference system units : </source>
      <translation>unità utilizzate nel sistema di riferimento spaziale : </translation>
    </message>
    <message>
      <source>Layer Spatial Reference System:</source>
      <translation>Sistema di riferimento spaziale usato nel vettoriale:</translation>
    </message>
    <message>
      <source>Project (Output) Spatial Reference System:</source>
      <translation>Sistema di riferimento spaziale della proiezione (output):</translation>
    </message>
    <message>
      <source>Attribute field info:</source>
      <translation>Informazione dell'attributo campo:</translation>
    </message>
    <message>
      <source>Field</source>
      <translation>Campo</translation>
    </message>
    <message>
      <source>Type</source>
      <translation>Tipo</translation>
    </message>
    <message>
      <source>Length</source>
      <translation>Lunghezza</translation>
    </message>
    <message>
      <source>Precision</source>
      <translation>Precisione</translation>
    </message>
  </context>
  <context>
    <name>QgsDlgVectorLayerPropertiesBase</name>
    <message>
      <source>Layer Properties</source>
      <translation>Proprietà del vettoriale</translation>
    </message>
    <message>
      <source>Apply</source>
      <translation>Applica</translation>
    </message>
    <message>
      <source>General</source>
      <translation>Generale</translation>
    </message>
    <message>
      <source>Display name</source>
      <translation>Nome da visualizzare</translation>
    </message>
    <message>
      <source>Layer source</source>
      <translation>Origine del vettoriale</translation>
    </message>
    <message>
      <source>TextLabel2</source>
      <translation>EtichettaTesto2</translation>
    </message>
    <message>
      <source>Legend type:</source>
      <translation>Tipo legenda</translation>
    </message>
    <message>
      <source>Labels</source>
      <translation>Etichette</translation>
    </message>
    <message>
      <source>Display labels</source>
      <translation>Visualizza etichette</translation>
    </message>
    <message>
      <source>Help</source>
      <translation>Aiuto</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Symbology</source>
      <translation>Simbologia</translation>
    </message>
    <message>
      <source>Visibility</source>
      <translation>Visibilità</translation>
    </message>
    <message>
      <source>Use scale dependent rendering</source>
      <translation>Rappresenta a seconda della scala</translation>
    </message>
    <message>
      <source>Maximum 1:</source>
      <translation>Massimo 1:</translation>
    </message>
    <message>
      <source>Maximum scale at which this layer will be displayed. </source>
      <translation>Scala massima secondo la quale il vettoriale deve essere visualizzato</translation>
    </message>
    <message>
      <source>Minimum 1:</source>
      <translation>Minimo 1:</translation>
    </message>
    <message>
      <source>Minimum scale at which this layer will be displayed. </source>
      <translation>Scala minima secondo la quale il vettoriale deve essere visualizzato</translation>
    </message>
    <message>
      <source>Display field</source>
      <translation>Mostra campo</translation>
    </message>
    <message>
      <source>Display field for the Identify Results dialog box</source>
      <translation>Mostra il campo nei finestra dei risultati dell'interrogazione</translation>
    </message>
    <message>
      <source>This sets the display field for the Identify Results dialog box</source>
      <translation>Mostra il campo nella finestra dei risultati dell'interrogazione</translation>
    </message>
    <message>
      <source>Use this control to set which field is placed at the top level of the Identify Results dialog box.</source>
      <translation>Serve a definire quale campo deve essere messo in cima nella finestra con i risultati dell'interrogazione</translation>
    </message>
    <message>
      <source>Subset:</source>
      <translation>Sottoinsieme:</translation>
    </message>
    <message>
      <source>Query Builder</source>
      <translation>Costruttore di query</translation>
    </message>
    <message>
      <source>Metadata</source>
      <translation>Metadata</translation>
    </message>
    <message>
      <source>Actions</source>
      <translation>Azioni</translation>
    </message>
    <message>
      <source>Spatial Reference System</source>
      <translation>Sistema di riferimento spaziale</translation>
    </message>
    <message>
      <source>Change</source>
      <translation>Cambia</translation>
    </message>
    <message>
      <source>Spatial Index</source>
      <translation>Indice spaziale</translation>
    </message>
    <message>
      <source>Create Spatial Index</source>
      <translation>Crea indice spaziale</translation>
    </message>
    <message>
      <source>Create</source>
      <translation>Crea</translation>
    </message>
  </context>
  <context>
    <name>QgsEditReservedWordsBase</name>
    <message>
      <source>Edit Reserved Words</source>
      <translation>Inserisci parole riservate</translation>
    </message>
    <message>
      <source>Status</source>
      <translation>Stato</translation>
    </message>
    <message>
      <source>Column name</source>
      <translation>Nome colonna</translation>
    </message>
    <message>
      <source>Index</source>
      <translation>Indice</translation>
    </message>
    <message>
      <source>This shapefile contains reserved words. These may affect the import into PostgreSQL. Edit the column names so none of the reserved words listed at the right are used. You may also change any column name if desired.</source>
      <translation>Questo shapefile contiene parole riservate, Questo può creare qualche problema nell'importarlo in PostgreSQL. 
Modifica i nomi delle colonne in modo che nessuna delle parole nella lista sulla destra siano utilizzate. Se vuoi puoi anche cambiare il nome di una qualsiasi colonna.</translation>
    </message>
    <message>
      <source>&amp;Help</source>
      <translation>&amp;Aiuto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>&amp;OK</source>
      <translation>&amp;OK</translation>
    </message>
    <message>
      <source>&amp;Cancel</source>
      <translation>&amp;Annulla</translation>
    </message>
    <message>
      <source>Reserved Words</source>
      <translation>Parole riservate</translation>
    </message>
  </context>
  <context>
    <name>QgsEncodingFileDialog</name>
    <message>
      <source>Encoding:</source>
      <translation>Codifica:</translation>
    </message>
  </context>
  <context>
    <name>QgsFillStyleWidgetBase</name>
    <message>
      <source>Form1</source>
      <translation>Form1</translation>
    </message>
    <message>
      <source>Fill Style</source>
      <translation>Stile di riempimento</translation>
    </message>
    <message>
      <source>PolyStyleWidget</source>
      <translation>Widget a stile multiplo</translation>
    </message>
    <message>
      <source>Colour:</source>
      <translation>Colore:</translation>
    </message>
    <message>
      <source>col</source>
      <translation>col</translation>
    </message>
  </context>
  <context>
    <name>QgsGeomTypeDialog</name>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Type</source>
      <translation>Tipo</translation>
    </message>
  </context>
  <context>
    <name>QgsGeomTypeDialogBase</name>
    <message>
      <source>Type</source>
      <translation>Tipo</translation>
    </message>
    <message>
      <source>Point</source>
      <translation>Punto</translation>
    </message>
    <message>
      <source>Line</source>
      <translation>Linea</translation>
    </message>
    <message>
      <source>Polygon</source>
      <translation>Poligono</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>New Vector Layer</source>
      <translation>Nuovo vettoriale</translation>
    </message>
    <message>
      <source>Attributes:</source>
      <translation>Attributi:</translation>
    </message>
    <message>
      <source>Add</source>
      <translation>Aggiungi</translation>
    </message>
    <message>
      <source>Column 1</source>
      <translation>Colonna 1</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
    <message>
      <source>Remove</source>
      <translation>Rimuovi</translation>
    </message>
  </context>
  <context>
    <name>QgsGraMaDialogBase</name>
    <message>
      <source>graduated Marker</source>
      <translation>Simbolo per classe</translation>
    </message>
    <message>
      <source>Mode:</source>
      <translation>Modalità: </translation>
    </message>
    <message>
      <source>Classification Field:</source>
      <translation>Campo classificazione:</translation>
    </message>
    <message>
      <source>Number of Classes:</source>
      <translation>Numero di classi</translation>
    </message>
  </context>
  <context>
    <name>QgsGraMaExtensionWidget</name>
    <message>
      <source>Lower</source>
      <translation>In basso</translation>
    </message>
    <message>
      <source>Upper</source>
      <translation>In alto</translation>
    </message>
    <message>
      <source>Label</source>
      <translation>Etichetta</translation>
    </message>
    <message>
      <source>Image</source>
      <translation>Immagine</translation>
    </message>
    <message>
      <source>Scale
Factor</source>
      <translation>Fattore di 
scala</translation>
    </message>
  </context>
  <context>
    <name>QgsGraSyDialogBase</name>
    <message>
      <source>graduated Symbol</source>
      <translation>Stile per classe</translation>
    </message>
    <message>
      <source>Number of Classes:</source>
      <translation>Numero di classi:</translation>
    </message>
    <message>
      <source>Classification Field:</source>
      <translation>Campo classificazione:</translation>
    </message>
    <message>
      <source>Mode:</source>
      <translation>Modalità: </translation>
    </message>
  </context>
  <context>
    <name>QgsGrassAttributesBase</name>
    <message>
      <source>GRASS Attributes</source>
      <translation>Attributi GRASS</translation>
    </message>
    <message>
      <source>Tab 1</source>
      <translation>Linguetta 1</translation>
    </message>
    <message>
      <source>result</source>
      <translation>risultato</translation>
    </message>
    <message>
      <source>Update</source>
      <translation>Aggiorna</translation>
    </message>
    <message>
      <source>Update database record</source>
      <translation>Aggiorna il record</translation>
    </message>
    <message>
      <source>New</source>
      <translation>Nuovo</translation>
    </message>
    <message>
      <source>Add new category using settings in GRASS Edit toolbox</source>
      <translation>Aggiungi una nuova categoria usando il pannello della barra strumenti GRASS</translation>
    </message>
    <message>
      <source>Delete</source>
      <translation>Elimina</translation>
    </message>
    <message>
      <source>Delete selected category</source>
      <translation>Elimina la categoria selezionata</translation>
    </message>
  </context>
  <context>
    <name>QgsGrassEdit</name>
    <message>
      <source>New vertex</source>
      <translation>Nuovo vertice</translation>
    </message>
    <message>
      <source>New point</source>
      <translation>Nuovo punto</translation>
    </message>
    <message>
      <source>New centroid</source>
      <translation>Nuovo centroide</translation>
    </message>
    <message>
      <source>Select vertex</source>
      <translation>Seleziona vertice</translation>
    </message>
    <message>
      <source>Select line segment</source>
      <translation>Seleziona segmento linea</translation>
    </message>
    <message>
      <source>Select position on line</source>
      <translation>Seleziona posizione sulla linea</translation>
    </message>
    <message>
      <source>Select element</source>
      <translation>Seleziona elemento</translation>
    </message>
    <message>
      <source>Undo last point</source>
      <translation>Annulla ultimo punto</translation>
    </message>
    <message>
      <source>Close line</source>
      <translation>Chiudi linea</translation>
    </message>
    <message>
      <source>Delete selected / select next</source>
      <translation>Elimina selezionato / seleziona prossimo</translation>
    </message>
    <message>
      <source>Release selected</source>
      <translation>Rilascia selezionato</translation>
    </message>
    <message>
      <source>New location</source>
      <translation>Nuova locazione</translation>
    </message>
    <message>
      <source>Select new position</source>
      <translation>Seleziona nuova posizione</translation>
    </message>
    <message>
      <source>New vertex position</source>
      <translation>Posizione nuovo vertice</translation>
    </message>
    <message>
      <source>Release</source>
      <translation>Rilascia</translation>
    </message>
    <message>
      <source>Delete vertex</source>
      <translation>Elimina vertice</translation>
    </message>
    <message>
      <source>Release vertex</source>
      <translation>Rilascia vertice</translation>
    </message>
    <message>
      <source>Split the line</source>
      <translation>Dividi la linea</translation>
    </message>
    <message>
      <source>Release the line</source>
      <translation>Rilascia la linea</translation>
    </message>
    <message>
      <source>Select point on line</source>
      <translation>Seleziona punto su linea</translation>
    </message>
    <message>
      <source>Left: </source>
      <translation>Sinistra: </translation>
    </message>
    <message>
      <source>Middle: </source>
      <translation>Centrale: </translation>
    </message>
    <message>
      <source>Rigth: </source>
      <translation>Destra: </translation>
    </message>
  </context>
  <context>
    <name>QgsGrassEditBase</name>
    <message>
      <source>GRASS Edit</source>
      <translation>Modifica dati GRASS</translation>
    </message>
    <message>
      <source>Category</source>
      <translation>Categoria</translation>
    </message>
    <message>
      <source>Mode</source>
      <translation>Modalità</translation>
    </message>
    <message>
      <source>Field (layer)</source>
      <translation>Campo (vettoriale)</translation>
    </message>
    <message>
      <source>Settings</source>
      <translation>Preferenze</translation>
    </message>
    <message>
      <source>Snapping in screen pixels</source>
      <translation>Modifica secondo i pixel dello schermo</translation>
    </message>
    <message>
      <source>Symbology</source>
      <translation>Simbologia</translation>
    </message>
    <message>
      <source>Column 1</source>
      <translation>Colonna 1</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
    <message>
      <source>Table</source>
      <translation>Tabella</translation>
    </message>
    <message>
      <source>Add Column</source>
      <translation>Aggiungi colonna</translation>
    </message>
    <message>
      <source>Create / Alter Table</source>
      <translation>Crea / Modifica Tabella</translation>
    </message>
    <message>
      <source>Tools</source>
      <translation>Strumenti</translation>
    </message>
    <message>
      <source>Toolbar</source>
      <translation>Barra degli strumenti</translation>
    </message>
    <message>
      <source>New line</source>
      <translation>Nuova linea</translation>
    </message>
    <message>
      <source>F2</source>
      <translation>F2</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
    <message>
      <source>New point</source>
      <translation>Nuovo punto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>New boundary</source>
      <translation>Nuovo contorno</translation>
    </message>
    <message>
      <source>F3</source>
      <translation>F3</translation>
    </message>
    <message>
      <source>New centroid</source>
      <translation>Nuovo centroide</translation>
    </message>
    <message>
      <source>F4</source>
      <translation>F4</translation>
    </message>
    <message>
      <source>Move vertex</source>
      <translation>Sposta vertice</translation>
    </message>
    <message>
      <source>F5</source>
      <translation>F5</translation>
    </message>
    <message>
      <source>Add vertex</source>
      <translation>Aggiungi vertice</translation>
    </message>
    <message>
      <source>F6</source>
      <translation>F6</translation>
    </message>
    <message>
      <source>Delete vertex</source>
      <translation>Elimina vertice</translation>
    </message>
    <message>
      <source>F7</source>
      <translation>F7</translation>
    </message>
    <message>
      <source>Split line</source>
      <translation>Dividi linea</translation>
    </message>
    <message>
      <source>F10</source>
      <translation>F10</translation>
    </message>
    <message>
      <source>Move line</source>
      <translation>Muovi linea</translation>
    </message>
    <message>
      <source>F9</source>
      <translation>F9</translation>
    </message>
    <message>
      <source>Delete line</source>
      <translation>Elimina linea</translation>
    </message>
    <message>
      <source>F11</source>
      <translation>F11</translation>
    </message>
    <message>
      <source>Edit attributes</source>
      <translation>Modifica attributi</translation>
    </message>
    <message>
      <source>ActionGroup</source>
      <translation>GruppoAzione</translation>
    </message>
  </context>
  <context>
    <name>QgsGrassModule</name>
    <message>
      <source>Run</source>
      <translation>Esegui</translation>
    </message>
    <message>
      <source>Stop</source>
      <translation>Interrompi</translation>
    </message>
  </context>
  <context>
    <name>QgsGrassModuleBase</name>
    <message>
      <source>GRASS Module</source>
      <translation>Modulo GRASS</translation>
    </message>
    <message>
      <source>Options</source>
      <translation>Opzioni</translation>
    </message>
    <message>
      <source>Output</source>
      <translation>Output</translation>
    </message>
    <message>
      <source>Manual</source>
      <translation>Manuale</translation>
    </message>
    <message>
      <source>Run</source>
      <translation>Esegui</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
  </context>
  <context>
    <name>QgsGrassPlugin</name>
    <message>
      <source>GRASS</source>
      <translation>GRASS</translation>
    </message>
  </context>
  <context>
    <name>QgsGrassRegionBase</name>
    <message>
      <source>GRASS Region Settings</source>
      <translation>Impostazioni della regione GRASS</translation>
    </message>
    <message>
      <source>N</source>
      <translation>N</translation>
    </message>
    <message>
      <source>W</source>
      <translation>O</translation>
    </message>
    <message>
      <source>E</source>
      <translation>E</translation>
    </message>
    <message>
      <source>S</source>
      <translation>S</translation>
    </message>
    <message>
      <source>N-S Res</source>
      <translation>N S Ris</translation>
    </message>
    <message>
      <source>Rows</source>
      <translation>Righe</translation>
    </message>
    <message>
      <source>Cols</source>
      <translation>Colonne</translation>
    </message>
    <message>
      <source>E-W Res</source>
      <translation>E O Ris</translation>
    </message>
    <message>
      <source>Color</source>
      <translation>Colore</translation>
    </message>
    <message>
      <source>Width</source>
      <translation>Larghezza</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
  </context>
  <context>
    <name>QgsGrassSelectBase</name>
    <message>
      <source>Gisdbase</source>
      <translation>Gisdbase</translation>
    </message>
    <message>
      <source>Location</source>
      <translation>Posizione</translation>
    </message>
    <message>
      <source>Browse</source>
      <translation>Sfoglia</translation>
    </message>
    <message>
      <source>Mapset</source>
      <translation>Mapset</translation>
    </message>
    <message>
      <source>Map name</source>
      <translation>Nome mappa</translation>
    </message>
    <message>
      <source>Layer</source>
      <translation>layer</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Select or type map name (wildcards '*' and '?' accepted for rasters)</source>
      <translation>Scegli o scrivi il nome della mappa (i caratteri jolly '*' e '?' sono validi per i raster)</translation>
    </message>
    <message>
      <source>Add GRASS Layer</source>
      <translation>Aggiungi un layer GRASS</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Cancella</translation>
    </message>
  </context>
  <context>
    <name>QgsGrassToolsBase</name>
    <message>
      <source>GRASS Tools</source>
      <translation>Strumenti GRASS</translation>
    </message>
    <message>
      <source>Modules</source>
      <translation>Moduli</translation>
    </message>
    <message>
      <source>Column 1</source>
      <translation>Colonna 1</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
    <message>
      <source>New Mapset</source>
      <translation>Nuovo Mapset</translation>
    </message>
    <message>
      <source>&amp;New</source>
      <translation>&amp;Nuovo</translation>
    </message>
    <message>
      <source>Ctrl+N</source>
      <translation>Ctrl+N </translation>
    </message>
    <message>
      <source>Open Mapset</source>
      <translation>Apri Mapset</translation>
    </message>
    <message>
      <source>&amp;Open...</source>
      <translation>&amp;Apri...</translation>
    </message>
    <message>
      <source>Ctrl+O</source>
      <translation>Ctrl+O</translation>
    </message>
  </context>
  <context>
    <name>QgsHelpViewerBase</name>
    <message>
      <source>QGIS Help</source>
      <translation>Aiuto QGIS</translation>
    </message>
    <message>
      <source>&amp;Home</source>
      <translation>&amp;Home</translation>
    </message>
    <message>
      <source>Alt+H</source>
      <translation>Alt+H</translation>
    </message>
    <message>
      <source>&amp;Forward</source>
      <translation>&amp;Avanti</translation>
    </message>
    <message>
      <source>Alt+F</source>
      <translation>Alt+F</translation>
    </message>
    <message>
      <source>&amp;Back</source>
      <translation>&amp;Indietro</translation>
    </message>
    <message>
      <source>Alt+B</source>
      <translation>Alt+B</translation>
    </message>
    <message>
      <source>&amp;Close</source>
      <translation>&amp;Chiudi</translation>
    </message>
    <message>
      <source>Alt+C</source>
      <translation>Alt+C</translation>
    </message>
  </context>
  <context>
    <name>QgsIdentifyResults</name>
    <message>
      <source>&lt;center>Run action&lt;/center></source>
      <translation>&lt;center>Esegui azione&lt;/center></translation>
    </message>
  </context>
  <context>
    <name>QgsIdentifyResultsBase</name>
    <message>
      <source>Identify Results</source>
      <translation>Informazioni sui risultati</translation>
    </message>
    <message>
      <source>Help</source>
      <translation>Aiuto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>Feature</source>
      <translation>Geometria</translation>
    </message>
    <message>
      <source>Value</source>
      <translation>Valore</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
  </context>
  <context>
    <name>QgsLUDialogBase</name>
    <message>
      <source>Enter class bounds</source>
      <translation>Inserisci gli intervalli di classe</translation>
    </message>
    <message>
      <source>Lower value</source>
      <translation>Abbassa il valore</translation>
    </message>
    <message>
      <source>-</source>
      <translation>-</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>Upper value</source>
      <translation>Alza il valore</translation>
    </message>
  </context>
  <context>
    <name>QgsLabelDialogBase</name>
    <message>
      <source>Form1</source>
      <translation>Form1</translation>
    </message>
    <message>
      <source>Source:</source>
      <translation>Origine:</translation>
    </message>
    <message>
      <source>Field containing label:</source>
      <translation>Campo con etichetta:</translation>
    </message>
    <message>
      <source>Default label:</source>
      <translation>Etichetta predefinita:</translation>
    </message>
    <message>
      <source>Preview:</source>
      <translation>Anteprima:</translation>
    </message>
    <message>
      <source>QGIS Rocks!</source>
      <translation>QGIS Spacca!</translation>
    </message>
    <message>
      <source>Font Style</source>
      <translation>Stile del carattere</translation>
    </message>
    <message>
      <source>Font</source>
      <translation>Carattere</translation>
    </message>
    <message>
      <source>Font size units are in ...</source>
      <translation>L'unità di misura delle dimensioni del font sono in ...</translation>
    </message>
    <message>
      <source>Points</source>
      <translation>Punti</translation>
    </message>
    <message>
      <source>Map units</source>
      <translation>Unità mappa</translation>
    </message>
    <message>
      <source>%</source>
      <translation>%</translation>
    </message>
    <message>
      <source>Transparency:</source>
      <translation>Trasparenza:</translation>
    </message>
    <message>
      <source>Colour</source>
      <translation>Colore</translation>
    </message>
    <message>
      <source>Position</source>
      <translation>Posizione</translation>
    </message>
    <message>
      <source>X Offset (pts):</source>
      <translation>Distanza X (punti):</translation>
    </message>
    <message>
      <source>Y Offset (pts):</source>
      <translation>Distanza Y (punti):</translation>
    </message>
    <message>
      <source>Offset units are in ...</source>
      <translation>Le unità delle distanze sono in ...</translation>
    </message>
    <message>
      <source>Buffer Settings</source>
      <translation>Impostazioni del buffer</translation>
    </message>
    <message>
      <source>Buffer Labels?</source>
      <translation>Buffer sulle etichette?</translation>
    </message>
    <message>
      <source>Size:</source>
      <translation>Dimensione:</translation>
    </message>
    <message>
      <source>Buffer size is in ...</source>
      <translation>La dimensione del buffer è in.</translation>
    </message>
    <message>
      <source>Size is in map units</source>
      <translation>unità mappa</translation>
    </message>
    <message>
      <source>Size is in points</source>
      <translation>punti</translation>
    </message>
    <message>
      <source>Alignment</source>
      <translation>Allineamento</translation>
    </message>
    <message>
      <source>Above</source>
      <translation>Al di sotto</translation>
    </message>
    <message>
      <source>Over</source>
      <translation>Al di sopra</translation>
    </message>
    <message>
      <source>Left</source>
      <translation>Sinistra</translation>
    </message>
    <message>
      <source>Below</source>
      <translation>Al di sotto</translation>
    </message>
    <message>
      <source>Right</source>
      <translation>Destra</translation>
    </message>
    <message>
      <source>Above Right</source>
      <translation>In alto a destra</translation>
    </message>
    <message>
      <source>Below Right</source>
      <translation>In basso a destra</translation>
    </message>
    <message>
      <source>Above Left</source>
      <translation>In alto a sinistra</translation>
    </message>
    <message>
      <source>Below Left</source>
      <translation>In basso a sinistra</translation>
    </message>
    <message>
      <source>Angle (deg):</source>
      <translation>Angolo (gradi):</translation>
    </message>
    <message>
      <source>Use best judgement when labels collide</source>
      <translation>Giudica la posizione migliore quando le etichette collidono</translation>
    </message>
    <message>
      <source>Data Defined Style</source>
      <translation>Definizione dello stile dei dati</translation>
    </message>
    <message>
      <source>&amp;Font family:</source>
      <translation>&amp;Famiglia del carattere:</translation>
    </message>
    <message>
      <source>&amp;Italic:</source>
      <translation>Cors&amp;ivo:</translation>
    </message>
    <message>
      <source>&amp;Underline:</source>
      <translation>Sottolineato:</translation>
    </message>
    <message>
      <source>&amp;Bold:</source>
      <translation>&amp;Grassetto:</translation>
    </message>
    <message>
      <source>&amp;Size:</source>
      <translation>Dimen&amp;sione:</translation>
    </message>
    <message>
      <source>X Coordinate:</source>
      <translation>Coordinata X:</translation>
    </message>
    <message>
      <source>Y Coordinate:</source>
      <translation>Coordinata Y:</translation>
    </message>
    <message>
      <source>Placement:</source>
      <translation>Posizione:</translation>
    </message>
    <message>
      <source>&amp;Colour:</source>
      <translation>&amp;Colore:</translation>
    </message>
    <message>
      <source>Font and Alignment</source>
      <translation>Carattere e allineamento</translation>
    </message>
    <message>
      <source>Buffer and Position</source>
      <translation>Buffer e Posizione</translation>
    </message>
    <message>
      <source>Advanced Data Defined Style</source>
      <translation>Definizioni avanzate</translation>
    </message>
    <message>
      <source>°</source>
      <translation>°</translation>
    </message>
  </context>
  <context>
    <name>QgsLayerProjectionSelectorBase</name>
    <message>
      <source>Layer Projection Selector</source>
      <translation>Selezione proiezione layer</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:12pt;font-family:Bitstream Vera Sans&quot;>
&lt;p style=&quot;margin-top:16px&quot;>&lt;span style=&quot;font-size:18pt;font-weight:600&quot;>Define this layer's projection:&lt;/span>&lt;/p>
&lt;p>This layer appears to have no projection specification. By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.&lt;/p>
&lt;/body>&lt;/html>
</source>
      <translation>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:12pt;font-family:Bitstream Vera Sans&quot;>
&lt;p style=&quot;margin-top:16px&quot;>&lt;span style=&quot;font-size:18pt;font-weight:600&quot;>Definisci la proiezione di questo layer:&lt;/span>&lt;/p>
&lt;p>Questo layer sembra non avere alcuna proiezione specificata. La scelta predefinita dal sistema è quella di assumere come proiezione quella utilizzata dal progetto, ma questa scelta può essere modificata a piacere.&lt;/p>
&lt;/body>&lt;/html></translation>
    </message>
  </context>
  <context>
    <name>QgsLegendItemBase</name>
    <message>
      <source>Form1</source>
      <translation>Form1</translation>
    </message>
    <message>
      <source>CheckBox1</source>
      <translation>CheckBox1</translation>
    </message>
    <message>
      <source>TextLabel1</source>
      <translation>EtichettaTesto1</translation>
    </message>
  </context>
  <context>
    <name>QgsLineStyleDialogBase</name>
    <message>
      <source>Select a line style</source>
      <translation>Seleziona uno stile di linea</translation>
    </message>
    <message>
      <source>Styles</source>
      <translation>Stili</translation>
    </message>
    <message>
      <source>Ok</source>
      <translation>Ok</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Cancella</translation>
    </message>
  </context>
  <context>
    <name>QgsLineStyleWidgetBase</name>
    <message>
      <source>Form2</source>
      <translation>Form2</translation>
    </message>
    <message>
      <source>Outline Style</source>
      <translation>Stile della linea esterna</translation>
    </message>
    <message>
      <source>Width:</source>
      <translation>Larghezza:</translation>
    </message>
    <message>
      <source>Colour:</source>
      <translation>Colore:</translation>
    </message>
    <message>
      <source>LineStyleWidget</source>
      <translation>WidgetStileLinea</translation>
    </message>
    <message>
      <source>col</source>
      <translation>col</translation>
    </message>
  </context>
  <context>
    <name>QgsMapCanvas</name>
    <message>
      <source>No active layer</source>
      <translation>Nessun layer attivo</translation>
    </message>
    <message>
      <source>To select features, you must choose an layer active by clicking on its name in the legend</source>
      <translation>Prima di potere selezionare delle geometrie occore attivare un vettoriale con un click sul relativo nome presente in legenda</translation>
    </message>
    <message>
      <source>To identify features, you must choose an layer active by clicking on its name in the legend</source>
      <translation>Per ottenere informazioni sulle geometrie devi prima selezionare un vettoriale con un click sul relativo nome in legenda</translation>
    </message>
    <message>
      <source>Error when projecting the view extent, you may need to manually zoom to the region of interest.</source>
      <translation>Errore durante la proiezione della vista a questa estensione, forse devi cambiare con uno zoom la regione di interesse.</translation>
    </message>
  </context>
  <context>
    <name>QgsMapLayer</name>
    <message>
      <source>&amp;Zoom to extent of selected layer</source>
      <translation>&amp;Zoom sul layer scelto</translation>
    </message>
    <message>
      <source>&amp;Properties</source>
      <translation>&amp;Proprietà</translation>
    </message>
    <message>
      <source>&amp;Remove</source>
      <translation>&amp;Rimuovi</translation>
    </message>
  </context>
  <context>
    <name>QgsMapserverExportBase</name>
    <message>
      <source>Export to Mapserver</source>
      <translation>Esporta per Mapserver</translation>
    </message>
    <message>
      <source>Map file</source>
      <translation>Map file</translation>
    </message>
    <message>
      <source>Export LAYER information only</source>
      <translation>Solo informazioni del layer</translation>
    </message>
    <message>
      <source>Map</source>
      <translation>Mappa</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Height</source>
      <translation>Altezza</translation>
    </message>
    <message>
      <source>Width</source>
      <translation>Largh.</translation>
    </message>
    <message>
      <source>dd</source>
      <translation>dd</translation>
    </message>
    <message>
      <source>feet</source>
      <translation>feet</translation>
    </message>
    <message>
      <source>meters</source>
      <translation>meters</translation>
    </message>
    <message>
      <source>miles</source>
      <translation>miles</translation>
    </message>
    <message>
      <source>inches</source>
      <translation>inches</translation>
    </message>
    <message>
      <source>kilometers</source>
      <translation>kilometers</translation>
    </message>
    <message>
      <source>Units</source>
      <translation>Unità</translation>
    </message>
    <message>
      <source>Image type</source>
      <translation>Tipo immag.</translation>
    </message>
    <message>
      <source>gif</source>
      <translation>gif</translation>
    </message>
    <message>
      <source>gtiff</source>
      <translation>gtiff</translation>
    </message>
    <message>
      <source>jpeg</source>
      <translation>jpeg</translation>
    </message>
    <message>
      <source>png</source>
      <translation>png</translation>
    </message>
    <message>
      <source>swf</source>
      <translation>swf</translation>
    </message>
    <message>
      <source>userdefined</source>
      <translation>userdefined</translation>
    </message>
    <message>
      <source>wbmp</source>
      <translation>wbmp</translation>
    </message>
    <message>
      <source>MinScale</source>
      <translation>Scala min.</translation>
    </message>
    <message>
      <source>MaxScale</source>
      <translation>Scala max</translation>
    </message>
    <message>
      <source>Prefix attached to map, scalebar and legend GIF filenames created using this MapFile. It should be kept short.</source>
      <translation>Utilizzare nomi brevi per il prefisso usato nella mappa, i nomi dei file GIS usati per la legenda e la scala presenti in questo MapFile</translation>
    </message>
    <message>
      <source>Web Interface Definition</source>
      <translation>Definzione dell'interfaccia web</translation>
    </message>
    <message>
      <source>Header</source>
      <translation>Titolo</translation>
    </message>
    <message>
      <source>Footer</source>
      <translation>Piè pag.</translation>
    </message>
    <message>
      <source>Template</source>
      <translation>Modello</translation>
    </message>
    <message>
      <source>&amp;Help</source>
      <translation>&amp;Aiuto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>&amp;OK</source>
      <translation>&amp;OK</translation>
    </message>
    <message>
      <source>&amp;Cancel</source>
      <translation>&amp;Cancella</translation>
    </message>
    <message>
      <source>...</source>
      <translation>...</translation>
    </message>
  </context>
  <context>
    <name>QgsMarkerDialogBase</name>
    <message>
      <source>Choose a marker symbol</source>
      <translation>Selezionare un simbolo</translation>
    </message>
    <message>
      <source>Directory</source>
      <translation>Cartella</translation>
    </message>
    <message>
      <source>...</source>
      <translation>...</translation>
    </message>
    <message>
      <source>Ok</source>
      <translation>Ok</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Cancella</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
  </context>
  <context>
    <name>QgsMeasure</name>
    <message>
      <source>Increment</source>
      <translation>Incrementa</translation>
    </message>
    <message>
      <source>Total</source>
      <translation>Totale</translation>
    </message>
  </context>
  <context>
    <name>QgsMeasureBase</name>
    <message>
      <source>Measure</source>
      <translation>Misura</translation>
    </message>
    <message>
      <source>New</source>
      <translation>Nuovo</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
  </context>
  <context>
    <name>QgsMessageViewer</name>
    <message>
      <source>QGIS Message</source>
      <translation>Messaggio QGIS</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
  </context>
  <context>
    <name>QgsMessageViewerBase</name>
    <message>
      <source>SPIT Message</source>
      <translation>Messaggio di SPIT</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
  </context>
  <context>
    <name>QgsNewConnection</name>
    <message>
      <source>Test connection</source>
      <translation>Prova la connessione</translation>
    </message>
    <message>
      <source>Connection to %1 was successfull</source>
      <translation>La connessione %1 funziona</translation>
    </message>
    <message>
      <source>Connection failed - Check settings and try again.

Extended error information:
</source>
      <translation>Connessione fallito - Controlla le impostazione e prova ancora 

Ulteriori informazioni sull'errore:</translation>
    </message>
  </context>
  <context>
    <name>QgsNewConnectionBase</name>
    <message>
      <source>Create a New PostGIS connection</source>
      <translation>Crea una nuova connessione PostGIS</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>Help</source>
      <translation>Aiuto</translation>
    </message>
    <message>
      <source>Connection Information</source>
      <translation>Informazioni sulla connessione</translation>
    </message>
    <message>
      <source>Host</source>
      <translation>Nome server</translation>
    </message>
    <message>
      <source>Database</source>
      <translation>Database</translation>
    </message>
    <message>
      <source>Username</source>
      <translation>Utente</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Name of the new connection</source>
      <translation>Nome della nuova connessione</translation>
    </message>
    <message>
      <source>Password</source>
      <translation>Password</translation>
    </message>
    <message>
      <source>Test Connect</source>
      <translation>Prova la connessione</translation>
    </message>
    <message>
      <source>Save Password</source>
      <translation>Salva la password</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>Port</source>
      <translation>Porta</translation>
    </message>
    <message>
      <source>5432</source>
      <translation>5432</translation>
    </message>
  </context>
  <context>
    <name>QgsOptionsBase</name>
    <message>
      <source>QGIS Options</source>
      <translation>Opzioni QGIS</translation>
    </message>
    <message>
      <source>epiphany</source>
      <translation>epiphany</translation>
    </message>
    <message>
      <source>galeon</source>
      <translation>galeon</translation>
    </message>
    <message>
      <source>konqueror</source>
      <translation>konqueror</translation>
    </message>
    <message>
      <source>mozilla</source>
      <translation>mozilla</translation>
    </message>
    <message>
      <source>opera</source>
      <translation>opera</translation>
    </message>
    <message>
      <source>&amp;Ok</source>
      <translation>&amp;Ok</translation>
    </message>
    <message>
      <source>Alt+O</source>
      <translation>Alt+O</translation>
    </message>
    <message>
      <source>&amp;Cancel</source>
      <translation>&amp;Cancella</translation>
    </message>
    <message>
      <source>Search Radius for Identifying Features</source>
      <translation>Raggio di ricerca per individuare le geometrie</translation>
    </message>
    <message>
      <source>Hide splash screen at startup</source>
      <translation>Nascondi lo splash screen all'avvio</translation>
    </message>
    <message>
      <source>&amp;Appearance</source>
      <translation>Interfacci&amp;a</translation>
    </message>
    <message>
      <source>&amp;Splash Screen</source>
      <translation>&amp;Splash Screen</translation>
    </message>
    <message>
      <source>&amp;Icon Theme</source>
      <translation>&amp;Icona del tema</translation>
    </message>
    <message>
      <source>Theme</source>
      <translation>Tema</translation>
    </message>
    <message>
      <source>&lt;b>Note: &lt;/b>Theme changes take effect the next time QGIS is started</source>
      <translation>&lt;b>Nota: &lt;/b>Il tema cambierà al prossimo riavvio di QGIS</translation>
    </message>
    <message>
      <source>Help &amp;Browser</source>
      <translation>&amp;Browser</translation>
    </message>
    <message>
      <source>Open help documents with</source>
      <translation>Apri i documenti di aiuto con</translation>
    </message>
    <message>
      <source>&lt;b>Note:&lt;/b> The browser must be in your PATH or you can specify &lt;br>the full path above</source>
      <translation>&lt;b>Nota:&lt;/b> Il browser deve essere nella tua variabile PATH&lt;br> altrimenti occorre specificarne il percorso</translation>
    </message>
    <message>
      <source>&amp;Rendering</source>
      <translation>&amp;Refresh layer</translation>
    </message>
    <message>
      <source>&amp;Update During Drawing</source>
      <translation>&amp;Aggiorna schermo</translation>
    </message>
    <message>
      <source>Update display after reading</source>
      <translation>Aggiorna lo schermo dopo la lettura di </translation>
    </message>
    <message>
      <source>Map display will be updated (drawn) after this many features have been read from the data source</source>
      <translation>La mappa viene aggiornata (disegnata) dopo che tutti i dati sono stati recuperati dalle rispettive sorgenti</translation>
    </message>
    <message>
      <source>features</source>
      <translation>elementi</translation>
    </message>
    <message>
      <source>(Set to 0 to not update the display until all features have been read)</source>
      <translation>(Il valore 0 non aggiorna l'immagine fino a che non sono stati letti tutti gli elementi)</translation>
    </message>
    <message>
      <source>&amp;Selection</source>
      <translation>&amp;Selezione</translation>
    </message>
    <message>
      <source>Search Radius</source>
      <translation>Raggio di ricerca</translation>
    </message>
    <message>
      <source>SVG Options</source>
      <translation>Opzioni SVG</translation>
    </message>
    <message>
      <source>SVG oversampling factor</source>
      <translation>Fattore di sovracampionamento SVG</translation>
    </message>
    <message>
      <source>&lt;b>Note: &lt;/b>A higher value gives smoother SVG symbols, but can slow down rendering</source>
      <translation>&lt;b>Nota: &lt;/b>Un valore molto alto aumenta la qualità dei simboli SVG, ma ne rallenta la visualizzazione</translation>
    </message>
    <message>
      <source>...</source>
      <translation>...</translation>
    </message>
    <message>
      <source>Initial Visibility</source>
      <translation>Visiblità iniziale</translation>
    </message>
    <message>
      <source>New layers added to the map are not displayed</source>
      <translation>I nuovi layer aggiungi sulla mappa non sono visibili</translation>
    </message>
    <message>
      <source>&lt;html>
&lt;b>Note:&lt;/b> Specify the value in thousandths.  The search radius is calculated as:&lt;br>
&amp;nbsp;&amp;nbsp;&lt;i>(Map View Width) * ( Value/1000.0)&lt;/i>
&lt;br>
By default QGIS uses a value of 5. Increase the value if you have trouble
identifying features without zooming in very close.
&lt;/html></source>
      <translation>&lt;html>
&lt;b>Nota:&lt;/b> Il valore va specificato in migliaia.  Il raggio di ricerca è calcolato come:&lt;br>
&amp;nbsp;&amp;nbsp;&lt;i>(Larghezza della vista mappa) * ( Valore/1000.0)&lt;/i>
&lt;br>
Il valore predefinito usato da QGIS è 5. Aumenta il valore nel caso si abbiano problemi nell'identificare gli elementi senza la necessità di uno zoom molto ristretto.
&lt;/html></translation>
    </message>
    <message>
      <source>Projection</source>
      <translation>Proiezione</translation>
    </message>
    <message>
      <source>Select Global Default ...</source>
      <translation>Selezioni globali predefinite ...</translation>
    </message>
    <message>
      <source>When layer is loaded that has no projection information:</source>
      <translation>Il layer caricato non ha alcuna informazione di proiezione:</translation>
    </message>
    <message>
      <source>Prompt for projection.</source>
      <translation>Prompt per la proiezione.</translation>
    </message>
    <message>
      <source>Project wide default projection will be used.</source>
      <translation>Questa proiezione sarà utilizzata per tutto il progetto</translation>
    </message>
    <message>
      <source>Global default projection displayed below will be used.</source>
      <translation>La proiezione visualizzata qui sotto sarà utilizzata come quella globale predefinita.</translation>
    </message>
    <message>
      <source>firefox</source>
      <translation>firefox</translation>
    </message>
    <message>
      <source>mozilla-firefox</source>
      <translation>mozilla-firefox</translation>
    </message>
  </context>
  <context>
    <name>QgsPatternDialogBase</name>
    <message>
      <source>Select a fill pattern</source>
      <translation>Seleziona un modello di riempimento</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>Ok</source>
      <translation>Ok</translation>
    </message>
  </context>
  <context>
    <name>QgsPgQueryBuilder</name>
    <message>
      <source>Table &lt;b>%1&lt;/b> in database &lt;b>%2&lt;/b> on host &lt;b>%3&lt;/b>, user &lt;b>%4&lt;/b></source>
      <translation>Tabella &lt;b>%1&lt;/b> del database &lt;b>%2&lt;/b> sul server &lt;b>%3&lt;/b>, utente &lt;b>%4&lt;/b></translation>
    </message>
    <message>
      <source>Query Result</source>
      <translation>Risultato della query</translation>
    </message>
    <message>
      <source>The where clause returned </source>
      <translation>Clausola di condizione (where) restituita</translation>
    </message>
    <message>
      <source> rows.</source>
      <translation> righe.</translation>
    </message>
    <message>
      <source>Query Failed</source>
      <translation>Interrogazione fallita</translation>
    </message>
    <message>
      <source>An error occurred when executing the query:</source>
      <translation>Ho riscontrato un errore mentre eseguivo la query:</translation>
    </message>
    <message>
      <source>Connection Failed</source>
      <translation>Connessione fallita</translation>
    </message>
    <message>
      <source>Connection to the database failed:</source>
      <translation>Connessione al database fallita:</translation>
    </message>
    <message>
      <source>Database error</source>
      <translation>Errore database</translation>
    </message>
    <message>
      <source>Failed to get sample of field values</source>
      <translation>Impossibile recuperare dei valori di esempio dal campo</translation>
    </message>
    <message>
      <source>No Records</source>
      <translation>Nessun record presente</translation>
    </message>
    <message>
      <source>The query you specified results in zero records being returned. Valid PostgreSQL layers must have at least one feature.</source>
      <translation>La query utilizzata restituisce valori nulli. Un vettoriale PostgreSQL valido deve avere almeno una geometria.</translation>
    </message>
  </context>
  <context>
    <name>QgsPgQueryBuilderBase</name>
    <message>
      <source>PostgreSQL Query Builder</source>
      <translation>PostgreSQL Query Builder</translation>
    </message>
    <message>
      <source>Clear</source>
      <translation>Pulisci</translation>
    </message>
    <message>
      <source>Test</source>
      <translation>Prova</translation>
    </message>
    <message>
      <source>Ok</source>
      <translation>Ok</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>SQL where clause</source>
      <translation>clausola SQL di condizione (where)</translation>
    </message>
    <message>
      <source>Operators</source>
      <translation>Operatori</translation>
    </message>
    <message>
      <source>=</source>
      <translation>=</translation>
    </message>
    <message>
      <source>IN</source>
      <translation>IN</translation>
    </message>
    <message>
      <source>NOT IN</source>
      <translation>NOT IN</translation>
    </message>
    <message>
      <source>&lt;</source>
      <translation>&lt;</translation>
    </message>
    <message>
      <source>></source>
      <translation>></translation>
    </message>
    <message>
      <source>%</source>
      <translation>%</translation>
    </message>
    <message>
      <source>&lt;=</source>
      <translation>&lt;=</translation>
    </message>
    <message>
      <source>>=</source>
      <translation>>=</translation>
    </message>
    <message>
      <source>!=</source>
      <translation>!=</translation>
    </message>
    <message>
      <source>LIKE</source>
      <translation>LIKE</translation>
    </message>
    <message>
      <source>AND</source>
      <translation>AND</translation>
    </message>
    <message>
      <source>ILIKE</source>
      <translation>ILIKE</translation>
    </message>
    <message>
      <source>OR</source>
      <translation>OR</translation>
    </message>
    <message>
      <source>NOT</source>
      <translation>NOT</translation>
    </message>
    <message>
      <source>Values</source>
      <translation>Valori</translation>
    </message>
    <message>
      <source>All</source>
      <translation>All</translation>
    </message>
    <message>
      <source>Sample</source>
      <translation>Esempio</translation>
    </message>
    <message>
      <source>Fields</source>
      <translation>Campi</translation>
    </message>
    <message>
      <source>Datasource:</source>
      <translation>Sorgente dati:</translation>
    </message>
  </context>
  <context>
    <name>QgsPluginManager</name>
    <message>
      <source>Choose a directory</source>
      <translation>Scegli una cartella</translation>
    </message>
    <message>
      <source>No Plugins</source>
      <translation>Non ci sono plugin</translation>
    </message>
    <message>
      <source>No QGIS plugins found in </source>
      <translation>Non è possibile repere plugin QGIS in </translation>
    </message>
  </context>
  <context>
    <name>QgsPluginManagerBase</name>
    <message>
      <source>QGIS Plugin Manger</source>
      <translation>Gestore dei plugin QGIS</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
    <message>
      <source>Description</source>
      <translation>Descrizione</translation>
    </message>
    <message>
      <source>Library Name</source>
      <translation>Nome libreria</translation>
    </message>
    <message>
      <source>Plugin Directory</source>
      <translation>Cartella dei plugin</translation>
    </message>
    <message>
      <source>...</source>
      <translation>...</translation>
    </message>
    <message>
      <source>To load a plugin, click the checkbox next to the plugin and click Ok</source>
      <translation>Per caricare un plugin: click sul checkbox, poi sul plugin e, infine, premere Ok</translation>
    </message>
    <message>
      <source>Version</source>
      <translation>Versione</translation>
    </message>
    <message>
      <source>&amp;Select All</source>
      <translation>&amp;Seleziona tutto</translation>
    </message>
    <message>
      <source>Alt+S</source>
      <translation>Alt+S</translation>
    </message>
    <message>
      <source>C&amp;lear All</source>
      <translation>E&amp;limina tutto</translation>
    </message>
    <message>
      <source>Alt+L</source>
      <translation>Alt L</translation>
    </message>
    <message>
      <source>&amp;Ok</source>
      <translation>&amp;Ok</translation>
    </message>
    <message>
      <source>Alt+O</source>
      <translation>Alt+O</translation>
    </message>
    <message>
      <source>&amp;Close</source>
      <translation>&amp;Chiudi</translation>
    </message>
    <message>
      <source>Alt+C</source>
      <translation>Alt+C</translation>
    </message>
  </context>
  <context>
    <name>QgsPointStyleWidgetBase</name>
    <message>
      <source>Form3</source>
      <translation>Form3</translation>
    </message>
    <message>
      <source>Symbol Style</source>
      <translation>Stile simbolo</translation>
    </message>
    <message>
      <source>Scale</source>
      <translation>Scala</translation>
    </message>
  </context>
  <context>
    <name>QgsProjectPropertiesBase</name>
    <message>
      <source>Project Properties</source>
      <translation>Proprietà della proiezione</translation>
    </message>
    <message>
      <source>Map Units</source>
      <translation>Unita mappà</translation>
    </message>
    <message>
      <source>Meters</source>
      <translation>Metri</translation>
    </message>
    <message>
      <source>Feet</source>
      <translation>Piedi</translation>
    </message>
    <message>
      <source>Decimal degrees</source>
      <translation>Gradi decimali</translation>
    </message>
    <message>
      <source>&amp;Help</source>
      <translation>&amp;Aiuto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>&amp;OK</source>
      <translation>&amp;OK</translation>
    </message>
    <message>
      <source>&amp;Cancel</source>
      <translation>&amp;Annulla</translation>
    </message>
    <message>
      <source>Default project title</source>
      <translation>Titolo progetto predefinito</translation>
    </message>
    <message>
      <source>&amp;Apply</source>
      <translation>&amp;Applica</translation>
    </message>
    <message>
      <source>Alt+A</source>
      <translation>Alt+A</translation>
    </message>
    <message>
      <source>General</source>
      <translation>Generale</translation>
    </message>
    <message>
      <source>Digitising Settings</source>
      <translation>Parametri di digitalizzazione</translation>
    </message>
    <message>
      <source>Line Width:</source>
      <translation>Larghezza linea:</translation>
    </message>
    <message>
      <source>Snapping Tolerance:</source>
      <translation>Tolleranza di snapping:</translation>
    </message>
    <message>
      <source>Line Colour:</source>
      <translation>Colore linea:</translation>
    </message>
    <message>
      <source>Cursor display precision</source>
      <translation>Precisione del cursore sul display</translation>
    </message>
    <message>
      <source>Automatic</source>
      <translation>Automatico</translation>
    </message>
    <message>
      <source>Automatically sets the number of decimal places in the mouse position display</source>
      <translation>Calcola automaticamente il numero di decimali per la visualizzazione della posizione del mouse sul display</translation>
    </message>
    <message>
      <source>The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display</source>
      <translation>Il numero di cifre decimali utilizzate per visualizzare la posizione del mouse durante il suo trascinamento sullo schermo sono calcolate in modo tale che lo spostamento da un pixel ad un altro cambi rispetto alla posizione sullo schermo.</translation>
    </message>
    <message>
      <source>Manual</source>
      <translation>Manuale</translation>
    </message>
    <message>
      <source>Sets the number of decimal places to use for the mouse position display</source>
      <translation>Stabilisce il numero di cifre decimali durante lo spostamento del mouse sul display</translation>
    </message>
    <message>
      <source>The number of decimal places for the manual option</source>
      <translation>Numero della posizione dei decimali per l'opzione manuale</translation>
    </message>
    <message>
      <source>decimal places</source>
      <translation>posizione dei decimali</translation>
    </message>
    <message>
      <source>Map Appearance</source>
      <translation>Aspetto della mappa</translation>
    </message>
    <message>
      <source>Selection Color:</source>
      <translation>Seleziona colore:</translation>
    </message>
    <message>
      <source>Project Title</source>
      <translation>Titolo progetto</translation>
    </message>
    <message>
      <source>Projection</source>
      <translation>Proiezione</translation>
    </message>
    <message>
      <source>Enable on the fly projection</source>
      <translation>Abilita la proiezione al volo</translation>
    </message>
  </context>
  <context>
    <name>QgsProjectionSelector</name>
    <message>
      <source>QGIS SRSID: </source>
      <translation>QGIS SRSID:</translation>
    </message>
    <message>
      <source>PostGIS SRID: </source>
      <translation>PostGIS SRID: </translation>
    </message>
  </context>
  <context>
    <name>QgsProjectionSelectorBase</name>
    <message>
      <source>Projection Selector</source>
      <translation>Selettore di proiezione</translation>
    </message>
    <message>
      <source>Projection</source>
      <translation>Proiezione</translation>
    </message>
    <message>
      <source>Coordinate Systems</source>
      <translation>Sistemi di coordinate</translation>
    </message>
    <message>
      <source>Spatial Reference Id</source>
      <translation>Id di riferimento spaziale (Spatial Reference Id)</translation>
    </message>
    <message>
      <source>Search</source>
      <translation>Cerca</translation>
    </message>
    <message>
      <source>Find</source>
      <translation>Trova</translation>
    </message>
    <message>
      <source>Postgis SRID</source>
      <translation>Postgis SRID</translation>
    </message>
    <message>
      <source>EPSG ID</source>
      <translation>EPSG ID</translation>
    </message>
    <message>
      <source>QGIS SRSID</source>
      <translation>QGIS SRSID</translation>
    </message>
    <message>
      <source>Name</source>
      <translation>Nome</translation>
    </message>
  </context>
  <context>
    <name>QgsRasterLayer</name>
    <message>
      <source>Not Set</source>
      <translation>Non definito</translation>
    </message>
    <message>
      <source>Driver:</source>
      <translation>Driver:</translation>
    </message>
    <message>
      <source>Dimensions:</source>
      <translation>Dimensioni:</translation>
    </message>
    <message>
      <source>X: </source>
      <translation>X: </translation>
    </message>
    <message>
      <source> Y: </source>
      <translation> Y: </translation>
    </message>
    <message>
      <source> Bands: </source>
      <translation> Bande:</translation>
    </message>
    <message>
      <source>Origin:</source>
      <translation>Origine:</translation>
    </message>
    <message>
      <source>Pixel Size:</source>
      <translation>Dimensioni pixel:</translation>
    </message>
    <message>
      <source>Red</source>
      <translation>Rosso</translation>
    </message>
    <message>
      <source>Green</source>
      <translation>Verde</translation>
    </message>
    <message>
      <source>Blue</source>
      <translation>Blu</translation>
    </message>
    <message>
      <source>Raster Extent: </source>
      <translation>Estesione Raster:</translation>
    </message>
    <message>
      <source>Clipped area: </source>
      <translation>Area ritagliata: </translation>
    </message>
    <message>
      <source>Pyramid overviews:</source>
      <translation>Situazione piramide:</translation>
    </message>
    <message>
      <source>Band Statistics (if gathered):</source>
      <translation>Statistiche della banda (se ricavato)</translation>
    </message>
    <message>
      <source>Property</source>
      <translation>Proprietà</translation>
    </message>
    <message>
      <source>Value</source>
      <translation>Valore</translation>
    </message>
    <message>
      <source>Band</source>
      <translation>Banda</translation>
    </message>
    <message>
      <source>Band No</source>
      <translation>Nessuna banda</translation>
    </message>
    <message>
      <source>No Stats</source>
      <translation>Nessuna statistica</translation>
    </message>
    <message>
      <source>No stats collected yet</source>
      <translation>Nessuna statistica ancora raccolta</translation>
    </message>
    <message>
      <source>Min Val</source>
      <translation>Valore minimo</translation>
    </message>
    <message>
      <source>Max Val</source>
      <translation>Valore massimo</translation>
    </message>
    <message>
      <source>Range</source>
      <translation>Intervallo</translation>
    </message>
    <message>
      <source>Mean</source>
      <translation>Media</translation>
    </message>
    <message>
      <source>Sum of squares</source>
      <translation>Somma dei quadrati</translation>
    </message>
    <message>
      <source>Standard Deviation</source>
      <translation>Deviazione standard</translation>
    </message>
    <message>
      <source>Sum of all cells</source>
      <translation>Somma di tutte le celle</translation>
    </message>
    <message>
      <source>Cell Count</source>
      <translation>Conta celle</translation>
    </message>
    <message>
      <source>Write access denied</source>
      <translation>Permesso di scrittura negato</translation>
    </message>
    <message>
      <source>Write access denied. Adjust the file permissions and try again.

</source>
      <translation>Permesso di scrittura negato. Sistema i permessi dei file e prova ancora.
</translation>
    </message>
    <message>
      <source>Data Type:</source>
      <translation>Tipo di dato:</translation>
    </message>
    <message>
      <source>GDT_Byte - Eight bit unsigned integer</source>
      <translation>GDT_Byte - Eight bit unsigned integer</translation>
    </message>
    <message>
      <source>GDT_UInt16 - Sixteen bit unsigned integer </source>
      <translation>GDT_UInt16 - Sixteen bit unsigned integer </translation>
    </message>
    <message>
      <source>GDT_Int16 - Sixteen bit signed integer </source>
      <translation>GDT_Int16 - Sixteen bit signed integer </translation>
    </message>
    <message>
      <source>GDT_UInt32 - Thirty two bit unsigned integer </source>
      <translation>GDT_UInt32 - Thirty two bit unsigned integer </translation>
    </message>
    <message>
      <source>GDT_Int32 - Thirty two bit signed integer </source>
      <translation>GDT_Int32 - Thirty two bit signed integer </translation>
    </message>
    <message>
      <source>GDT_Float32 - Thirty two bit floating point </source>
      <translation>GDT_Float32 - Thirty two bit floating point </translation>
    </message>
    <message>
      <source>GDT_Float64 - Sixty four bit floating point </source>
      <translation>GDT_Float64 - Sixty four bit floating point </translation>
    </message>
    <message>
      <source>GDT_CInt16 - Complex Int16 </source>
      <translation>GDT_CInt16 - Complex Int16 </translation>
    </message>
    <message>
      <source>GDT_CInt32 - Complex Int32 </source>
      <translation>GDT_CInt32 - Complex Int32 </translation>
    </message>
    <message>
      <source>GDT_CFloat32 - Complex Float32 </source>
      <translation>GDT_CFloat32 - Complex Float32 </translation>
    </message>
    <message>
      <source>GDT_CFloat64 - Complex Float64 </source>
      <translation>GDT_CFloat64 - Complex Float64 </translation>
    </message>
    <message>
      <source>Could not determine raster data type.</source>
      <translation>Non riesco a determinare il tipo di raster</translation>
    </message>
    <message>
      <source>&lt;center>&lt;b>Raster Layer&lt;/b>&lt;/center></source>
      <translation>&lt;center>&lt;b>Raster&lt;/b>&lt;/center></translation>
    </message>
    <message>
      <source>&lt;center>&lt;b>Transparency&lt;/b>&lt;/center></source>
      <translation>&lt;center>&lt;b>Transparenza&lt;/b>&lt;/center></translation>
    </message>
    <message>
      <source>Average Magphase</source>
      <translation>Media magphase</translation>
    </message>
    <message>
      <source>Average</source>
      <translation>Media</translation>
    </message>
    <message>
      <source>Layer Spatial Reference System: </source>
      <translation>Sistema di riferimento spaziale del layer: </translation>
    </message>
    <message>
      <source>Project Spatial Reference System: </source>
      <translation>Sistema di riferimento spaziale del progetto: </translation>
    </message>
    <message>
      <source>Building pyramids failed.</source>
      <translation>Errore nella creazione della piramide colori.</translation>
    </message>
    <message>
      <source>out of extent</source>
      <translation>al di fuori dell'estensione</translation>
    </message>
    <message>
      <source>null (no data)</source>
      <translation>nullo (nessun dato)</translation>
    </message>
  </context>
  <context>
    <name>QgsRasterLayerProperties</name>
    <message>
      <source>No Data:</source>
      <translation>Nessun dato:</translation>
    </message>
    <message>
      <source>&lt;h3>Multiband Image Notes&lt;/h3>&lt;p>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:&lt;/p>&lt;ul>&lt;li>Visible Blue (0.45 to 0.52 microns) - not mapped&lt;/li>&lt;li>Visible Green (0.52 to 0.60 microns) - not mapped&lt;/li>&lt;/li>Visible Red (0.63 to 0.69 microns) - mapped to red in image&lt;/li>&lt;li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image&lt;/li>&lt;li>Mid Infrared (1.55 to 1.75 microns) - not mapped&lt;/li>&lt;li>Thermal Infrared (10.4 to 12.5 microns) - not mapped&lt;/li>&lt;li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image&lt;/li>&lt;/ul></source>
      <translation>&lt;h3>Note immagine multibanda&lt;/h3>&lt;p>Questa è una immagine multibanda. E' possibile disegnarla come una scala di grigi o colori (RGB). Per un colore immagine e' possibile associare arbitrariamente bande ai colori. Ad esempio, nel caso di una immagine landsat a 7 bande, è possibile colorarla come:&lt;/p>&lt;ul>&lt;li>Blu Visibile (da 0.45 a 0.52 micron) - non mappati&lt;/li>&lt;li>Verde Visibile (da 0.52 a 0.60 micron) - non mappati&lt;/li>&lt;li>Rosso Visibile (da 0.63 a 0.69 micron) - mappati da rosso nell'immagine&lt;/li>&lt;li>Infrarosso vicino (da 0.76 a 0.90 micron) - mappato da verde nell'immagine&lt;/li>&lt;li>Infrarosso medio (da 1.55 a 1.75 micron) - non mappato&lt;/li>&lt;li>Infrarosso termale (da 10.4 a 12.5 micron) - non mappato&lt;/li>&lt;li>Infrarosso medio (da 2.08 a 2.35 micron) - mappato da blu nell'immagine&lt;/li>&lt;/ul></translation>
    </message>
    <message>
      <source>&lt;h3>Paletted Image Notes&lt;/h3> &lt;p>This image uses a fixed color palette. You can remap these colors in different combinations e.g.&lt;/p>&lt;ul>&lt;li>Red - blue in image&lt;/li>&lt;li>Green - blue in image&lt;/li>&lt;li>Blue - green in image&lt;/li>&lt;/ul></source>
      <translation>&lt;h3>Nota tavolazza immagine&lt;/h3>&lt;p>Questa immagine utilizza una tavolozza di colori fissa. E' possibile rimappare questi colori in diverse combinazioni&lt;/p>&lt;ul>&lt;li>Rosso - blu nell'immagine&lt;/li>&lt;li>Verde-blu nell'immagine&lt;/li>&lt;li>Blu-verde nell'immagine&lt;/li>&lt;/ul></translation>
    </message>
    <message>
      <source>&lt;h3>Grayscale Image Notes&lt;/h3> &lt;p>You can remap these grayscale colors to a pseudocolor image using an automatically generated color ramp.&lt;/p></source>
      <translation>&lt;h3>Note immagine scala di grigi&lt;/h3>&lt;p>E' possibile rimappare queste scale di grigio con dei pseudocolori utilizzando una rampa automatica di colori&lt;/p></translation>
    </message>
    <message>
      <source>Grayscale</source>
      <translation>Scala di grigi</translation>
    </message>
    <message>
      <source>Pseudocolor</source>
      <translation>Pseudo colore</translation>
    </message>
    <message>
      <source>Freak Out</source>
      <translation>Freak Out</translation>
    </message>
    <message>
      <source>Columns:</source>
      <translation>Colonne:</translation>
    </message>
    <message>
      <source>Rows:</source>
      <translation>Righe:</translation>
    </message>
    <message>
      <source>Palette</source>
      <translation>Tavolozza</translation>
    </message>
  </context>
  <context>
    <name>QgsRasterLayerPropertiesBase</name>
    <message>
      <source>Raster Layer Properties</source>
      <translation>Proprietà raster</translation>
    </message>
    <message>
      <source>&amp;Cancel</source>
      <translation>&amp;Annulla</translation>
    </message>
    <message>
      <source>&amp;OK</source>
      <translation>&amp;OK</translation>
    </message>
    <message>
      <source>&amp;Apply</source>
      <translation>&amp;Applica</translation>
    </message>
    <message>
      <source>Alt+A</source>
      <translation>Alt+A</translation>
    </message>
    <message>
      <source>&amp;Help</source>
      <translation>&amp;Aiuto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>General</source>
      <translation>Generale</translation>
    </message>
    <message>
      <source>Layer Source:</source>
      <translation>Sorgente raster:</translation>
    </message>
    <message>
      <source>Display Name:</source>
      <translation>Nome schermo:</translation>
    </message>
    <message>
      <source>Legend:</source>
      <translation>Legenda:</translation>
    </message>
    <message>
      <source>Show debug info as overlay on raster?</source>
      <translation>Mostro le informazioni di debug come layer sovrapposto al raster?</translation>
    </message>
    <message>
      <source>No Data:</source>
      <translation>Nessun dato:</translation>
    </message>
    <message>
      <source>Symbology</source>
      <translation>Simbologia</translation>
    </message>
    <message>
      <source>Appearance</source>
      <translation>Rappresentazione</translation>
    </message>
    <message>
      <source>Transparency:</source>
      <translation>Trasparenza:</translation>
    </message>
    <message>
      <source>&lt;p align=&quot;right&quot;>Full&lt;/p></source>
      <translation>&lt;p align=&quot;right&quot;>Pieno&lt;/p></translation>
    </message>
    <message>
      <source>None</source>
      <translation>Nessuno</translation>
    </message>
    <message>
      <source>Invert Color Map</source>
      <translation>Inverti la mappa colori</translation>
    </message>
    <message>
      <source>0%</source>
      <translation>0%</translation>
    </message>
    <message>
      <source>RGB</source>
      <translation>RGB</translation>
    </message>
    <message>
      <source>Band</source>
      <translation>Banda</translation>
    </message>
    <message>
      <source>&lt;b>&lt;font color=&quot;#00ff00&quot;>Green&lt;/font>&lt;/b></source>
      <translation>&lt;b>&lt;font color=&quot;#00ff00&quot;>Verde&lt;/font>&lt;/b></translation>
    </message>
    <message>
      <source>&lt;b>&lt;font color=&quot;#ff0000&quot;>Red&lt;/font>&lt;/b></source>
      <translation>&lt;b>&lt;font color=&quot;#ff0000&quot;>Rosso&lt;/font>&lt;/b></translation>
    </message>
    <message>
      <source>&lt;b>&lt;font color=&quot;#0000ff&quot;>Blue&lt;/font>&lt;/b></source>
      <translation>&lt;b>&lt;font color=&quot;#0000ff&quot;>Blu&lt;/font>&lt;/b></translation>
    </message>
    <message>
      <source>Color</source>
      <translation>Colore</translation>
    </message>
    <message>
      <source>Grayscale</source>
      <translation>Scala di grigi</translation>
    </message>
    <message>
      <source>Gray</source>
      <translation>Grigio</translation>
    </message>
    <message>
      <source>Std Deviations</source>
      <translation>Deviazione standard</translation>
    </message>
    <message>
      <source>Color Map</source>
      <translation>Mappa colore</translation>
    </message>
    <message>
      <source>Show As</source>
      <translation>Mostra come</translation>
    </message>
    <message>
      <source>Three Band</source>
      <translation>Banda tripla</translation>
    </message>
    <message>
      <source>Single Band</source>
      <translation>Banda singola</translation>
    </message>
    <message>
      <source>Advanced Symbology</source>
      <translation>Simbologia avanzata</translation>
    </message>
    <message>
      <source>Red</source>
      <translation>Rosso</translation>
    </message>
    <message>
      <source>Green</source>
      <translation>Verde</translation>
    </message>
    <message>
      <source>Blue</source>
      <translation>Blu</translation>
    </message>
    <message>
      <source>Behaviour</source>
      <translation>Comportamento</translation>
    </message>
    <message>
      <source>Scale histogram to the limits defined above (displays all data)</source>
      <translation>Istogramma della scala ai limiti alti (mostra tutti i dati)</translation>
    </message>
    <message>
      <source>Exclude values outside the above ranges (after color mapping)</source>
      <translation>Escludi i valori fuori dai seguenti intervalli (dopo la colorazione della mappa)</translation>
    </message>
    <message>
      <source>&lt;b>&lt;font color=&quot;#ff0000&quot;>Please Note :&lt;/font> Advanced Symbology not implemented yet!&lt;/b></source>
      <translation>&lt;b>&lt;font color=&quot;#ff0000&quot;>Nota bene :&lt;/font> La simbologia avanzata non è stata ancora implementata!&lt;/b></translation>
    </message>
    <message>
      <source>Metadata</source>
      <translation>Metadata</translation>
    </message>
    <message>
      <source>Pyramids</source>
      <translation>Piramidi</translation>
    </message>
    <message>
      <source>Resampling Method</source>
      <translation>Metodo di ricampionamento</translation>
    </message>
    <message>
      <source>Average Magphase</source>
      <translation>Media magphase</translation>
    </message>
    <message>
      <source>Average</source>
      <translation>Media</translation>
    </message>
    <message>
      <source>Nearest Neighbour</source>
      <translation>Il più vicino possibile</translation>
    </message>
    <message>
      <source>Build Pyramids</source>
      <translation>Crea piramidi</translation>
    </message>
    <message>
      <source>Pyramid Resolutions</source>
      <translation>Risoluzioni a piramide</translation>
    </message>
    <message>
      <source>Thumbnail</source>
      <translation>Miniature</translation>
    </message>
    <message>
      <source>Columns:</source>
      <translation>Colonne:</translation>
    </message>
    <message>
      <source>Rows:</source>
      <translation>Righe:</translation>
    </message>
    <message>
      <source>Palette:</source>
      <translation>Tavolozza:</translation>
    </message>
    <message>
      <source>Visibility</source>
      <translation>Visibilità</translation>
    </message>
    <message>
      <source>Use scale dependent rendering</source>
      <translation>Visualizza il raster in base alla scala</translation>
    </message>
    <message>
      <source>Maximum 1:</source>
      <translation>Massimo 1:</translation>
    </message>
    <message>
      <source>Maximum scale at which this layer will be displayed. </source>
      <translation>Scala massima secondo la quale il raster deve essere visualizzato</translation>
    </message>
    <message>
      <source>Minimum 1:</source>
      <translation>Minimo 1:</translation>
    </message>
    <message>
      <source>Minimum scale at which this layer will be displayed. </source>
      <translation>Scala minima secondo la quale il raster deve essere visualizzato</translation>
    </message>
    <message>
      <source>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:12pt;font-family:Arial&quot;>
&lt;p style=&quot;margin-top:14px&quot;>&lt;span style=&quot;font-weight:600&quot;>Notes&lt;/span>&lt;/p>
&lt;/body>&lt;/html>
</source>
      <translation>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:12pt;font-family:Arial&quot;>
&lt;p style=&quot;margin-top:14px&quot;>&lt;span style=&quot;font-weight:600&quot;>Note&lt;/span>&lt;/p>
&lt;/body>&lt;/html></translation>
    </message>
    <message>
      <source>Spatial Reference System</source>
      <translation>Sistema di riferimento spaziale</translation>
    </message>
    <message>
      <source>Change</source>
      <translation>Cambia</translation>
    </message>
    <message>
      <source>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:12pt;font-family:Arial&quot;>
&lt;p style=&quot;margin-top:18px&quot;>&lt;span style=&quot;font-size:22pt;font-weight:600&quot;>Description&lt;/span>&lt;/p>
&lt;p>Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. &lt;/p>
&lt;p>&lt;span style=&quot;color:#ff0000&quot;>Please note that building pyramids may alter the original data file and once created they cannot be removed.&lt;/span>&lt;/p>
&lt;/body>&lt;/html>
</source>
      <translation>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:12pt;font-family:Arial&quot;>
&lt;p style=&quot;margin-top:18px&quot;>&lt;span style=&quot;font-size:22pt;font-weight:600&quot;>Descrizione&lt;/span>&lt;/p>
&lt;p>Raster con risoluzione molto alta possono rendere lenta la navigazione in QGIS. Con la creazione di copie di risoluzioni più basse (piramidi) si ottiene un miglioramento nelle performance: QGIS sceglierà la risoluzione migliore in base al layer di zoom. E' importante avere i diritti di scrittura nella cartella dove sono archiviati i dati originali in modo da permettere la creazione delle piramidi. &lt;/p>
&lt;p>&lt;span style=&quot;color:#ff0000&quot;>Attenzione le piramidi create possono alterare i dati e, una volta create, non possono essere rimosse&lt;/span>&lt;/p>
&lt;/body>&lt;/html>
</translation>
    </message>
    <message>
      <source>Histogram</source>
      <translation>Istogramma</translation>
    </message>
    <message>
      <source>Options</source>
      <translation>Opzioni</translation>
    </message>
    <message>
      <source>Out Of Range OK?</source>
      <translation>Al di fuori del confine OK?</translation>
    </message>
    <message>
      <source>Allow Approximation</source>
      <translation>Abilita approssimazione</translation>
    </message>
    <message>
      <source>Chart Type</source>
      <translation>Tipo diagramma</translation>
    </message>
    <message>
      <source>Bar Chart</source>
      <translation>Diagramma a colonna</translation>
    </message>
    <message>
      <source>Line Graph</source>
      <translation>Diagramma a linea</translation>
    </message>
    <message>
      <source>X Range:</source>
      <translation>Confine X:</translation>
    </message>
    <message>
      <source>Refresh</source>
      <translation>Aggiorna</translation>
    </message>
  </context>
  <context>
    <name>QgsRunProcess</name>
    <message>
      <source>Unable to run command</source>
      <translation>Impossibile eseguire il comando</translation>
    </message>
    <message>
      <source>Unable to run the command</source>
      <translation>Impossibile eseguire il comando</translation>
    </message>
    <message>
      <source>Starting</source>
      <translation>Avvio</translation>
    </message>
    <message>
      <source>Done</source>
      <translation>Fatto</translation>
    </message>
  </context>
  <context>
    <name>QgsScanGeometries</name>
    <message>
      <source>Scanning Geometries</source>
      <translation>Rilevo geometrie</translation>
    </message>
    <message>
      <source>textLabel1</source>
      <translation>testoEtichetta1</translation>
    </message>
  </context>
  <context>
    <name>QgsSiMaDialogBase</name>
    <message>
      <source>QgsSiMaDialogBase</source>
      <translation>QgsSiMaDialogBase</translation>
    </message>
    <message>
      <source>Image</source>
      <translation>Immagine</translation>
    </message>
    <message>
      <source>Directory</source>
      <translation>Cartella</translation>
    </message>
    <message>
      <source>...</source>
      <translation>...</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
    <message>
      <source>Scale Factor (%)</source>
      <translation>Fattore di scala(%)</translation>
    </message>
  </context>
  <context>
    <name>QgsSiSyDialogBase</name>
    <message>
      <source>Single Symbol</source>
      <translation>Stile unico</translation>
    </message>
    <message>
      <source>...</source>
      <translation>...</translation>
    </message>
    <message>
      <source>Label:</source>
      <translation>Etichetta:</translation>
    </message>
    <message>
      <source>Outline Style:</source>
      <translation>Stile tratto esterno:</translation>
    </message>
    <message>
      <source>Fill Color:</source>
      <translation>Colore di riempimento:</translation>
    </message>
    <message>
      <source>Outline color:</source>
      <translation>Colore esterno:</translation>
    </message>
    <message>
      <source>Outline Width:</source>
      <translation>Larghezza del tratto del riquadro</translation>
    </message>
    <message>
      <source>Clear</source>
      <translation>Pulisci</translation>
    </message>
    <message>
      <source>Fill Patterns:</source>
      <translation>Motivi di riempimento:</translation>
    </message>
    <message>
      <source>Point</source>
      <translation>Punto</translation>
    </message>
    <message>
      <source>Symbol</source>
      <translation>Simbolo</translation>
    </message>
    <message>
      <source>Size</source>
      <translation>Dimensione</translation>
    </message>
  </context>
  <context>
    <name>QgsSpit</name>
    <message>
      <source>Are you sure you want to remove the [</source>
      <translation>Siamo sicuri di voler rimuovere [</translation>
    </message>
    <message>
      <source>] connection and all associated settings?</source>
      <translation>] la connessione e tutti i parametri associati?</translation>
    </message>
    <message>
      <source>Confirm Delete</source>
      <translation>Conferma eliminazione</translation>
    </message>
    <message>
      <source>Yes</source>
      <translation>Sì</translation>
    </message>
    <message>
      <source>No</source>
      <translation>No</translation>
    </message>
    <message>
      <source> - Edit Column Names</source>
      <translation> - Modifica i nomi della colonna</translation>
    </message>
    <message>
      <source>The following Shapefile(s) could not be loaded:

</source>
      <translation>Il seguente/i file shape non possono essere caricati</translation>
    </message>
    <message>
      <source>REASON: File cannot be opened</source>
      <translation>RAGIONE: il file non può essere aperto</translation>
    </message>
    <message>
      <source>REASON: One or both of the Shapefile files (*.dbf, *.shx) missing</source>
      <translation>RAGIONE: Uno o entrambi i file shape (*.dbf, *.shx) non sono presenti</translation>
    </message>
    <message>
      <source>General Interface Help:</source>
      <translation>Interfaccia generale di aiuto:</translation>
    </message>
    <message>
      <source>PostgreSQL Connections:</source>
      <translation>Connessioni PostgreSQL:</translation>
    </message>
    <message>
      <source>[New ...] - create a new connection</source>
      <translation>[Nuova ...] - crea una nuova connessione</translation>
    </message>
    <message>
      <source>[Edit ...] - edit the currently selected connection</source>
      <translation>[Modifica ...] - modifica la connessione attualmente selezionata</translation>
    </message>
    <message>
      <source>[Remove] - remove the currently selected connection</source>
      <translation>[Rimuovi] - rimuove la connessione attualmente selezionata</translation>
    </message>
    <message>
      <source>-you need to select a connection that works (connects properly) in order to import files</source>
      <translation>- bisogna selezionare una connessione funzionante prima di poter importare file</translation>
    </message>
    <message>
      <source>-when changing connections Global Schema also changes accordingly</source>
      <translation>- mentre cambiando le connessioni cambiano di conseguenza anche il Global Schema</translation>
    </message>
    <message>
      <source>Shapefile List:</source>
      <translation>Lista degli shapefile:</translation>
    </message>
    <message>
      <source>[Add ...] - open a File dialog and browse to the desired file(s) to import</source>
      <translation>[Aggiungi ... ] - apre una finestra di dialogo da cui poter sfogliare il file system e selezionare uno o più file da importare</translation>
    </message>
    <message>
      <source>[Remove] - remove the currently selected file(s) from the list</source>
      <translation>[Rimuovi] - rimuove dalla lista uno o più file selezionati</translation>
    </message>
    <message>
      <source>[Remove All] - remove all the files in the list</source>
      <translation>[Rimuovi tutto] - rimuove tutti i file della lista</translation>
    </message>
    <message>
      <source>[SRID] - Reference ID for the shapefiles to be imported</source>
      <translation>[SRID] - ID del sistema di riferimento per i file shape da importare</translation>
    </message>
    <message>
      <source>[Use Default (SRID)] - set SRID to -1</source>
      <translation>[Usa predefinito (SRID)] - assume il valore -1 per l'SRID</translation>
    </message>
    <message>
      <source>[Geometry Column Name] - name of the geometry column in the database</source>
      <translation>[Nome colonna geometria] - nome della colonna con la geometria presente nel database</translation>
    </message>
    <message>
      <source>[Use Default (Geometry Column Name)] - set column name to 'the_geom'</source>
      <translation>[Usa predefinito (nome colonna geometria)] - assegna il nome 'the_geom' alla colonna con la geometria</translation>
    </message>
    <message>
      <source>[Glogal Schema] - set the schema for all files to be imported into</source>
      <translation>[Schema globale] - definisce lo schema con cui importare tutti i file</translation>
    </message>
    <message>
      <source>[Import] - import the current shapefiles in the list</source>
      <translation>[Importa] - importa la lista dei file shape selezionati</translation>
    </message>
    <message>
      <source>[Quit] - quit the program
</source>
      <translation>[Esci] - Chiude il programma</translation>
    </message>
    <message>
      <source>[Help] - display this help dialog</source>
      <translation>[Aiuto] - visualizza questa finestra di aiuto</translation>
    </message>
    <message>
      <source>Import Shapefiles</source>
      <translation>Importa shapefile</translation>
    </message>
    <message>
      <source>You need to specify a Connection first</source>
      <translation>Prima si deve definire una connessione</translation>
    </message>
    <message>
      <source>Connection failed - Check settings and try again</source>
      <translation>Connessione fallita - Controllare i parametri e tentare ancora</translation>
    </message>
    <message>
      <source>You need to add shapefiles to the list first</source>
      <translation>Prima si deve aggiungere uno shapefile dalla lista</translation>
    </message>
    <message>
      <source>Importing files</source>
      <translation>Importa file</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>Progress</source>
      <translation>Progresso</translation>
    </message>
    <message>
      <source>Problem inserting features from file:</source>
      <translation>Problema nell'inserimento di elementi dal file:</translation>
    </message>
    <message>
      <source>Invalid table name.</source>
      <translation>Nome di tabella non valido.</translation>
    </message>
    <message>
      <source>No fields detected.</source>
      <translation>Nessun campo individuato.</translation>
    </message>
    <message>
      <source>The following fields are duplicates:</source>
      <translation>Questi campi risultano duplicati:</translation>
    </message>
    <message>
      <source>Import Shapefiles - Relation Exists</source>
      <translation>Importa shapefile - Relazione esistente</translation>
    </message>
    <message>
      <source>The Shapefile:</source>
      <translation>Lo shapefile:</translation>
    </message>
    <message>
      <source>will use [</source>
      <translation>verrà usato [</translation>
    </message>
    <message>
      <source>] relation for its data,</source>
      <translation>] in relazione ad ogni dato,  </translation>
    </message>
    <message>
      <source>which already exists and possibly contains data.</source>
      <translation>che sono già presenti e possibilimente contengono dati.</translation>
    </message>
    <message>
      <source>To avoid data loss change the &quot;DB Relation Name&quot;</source>
      <translation>Per evitare la perdita di dati camba 'Nome relazione DB'</translation>
    </message>
    <message>
      <source>for this Shapefile in the main dialog file list.</source>
      <translation>per questo shapefile nella lista principale dei file</translation>
    </message>
    <message>
      <source>Do you want to overwrite the [</source>
      <translation>Vuoi sovrascrivere la relazione [</translation>
    </message>
    <message>
      <source>] relation?</source>
      <translation>] ?</translation>
    </message>
    <message>
      <source>Relation Exists</source>
      <translation>Relazione presente</translation>
    </message>
    <message>
      <source>Use the table below to edit column names. Make sure that none of the columns are named using a PostgreSQL reserved word</source>
      <translation>Usa la tabella qui sotto per modificare il nome delle colonne. Fa attenzione che nessuna delle colonne faccia uno di una parola chiave usata da PostgreSQL</translation>
    </message>
  </context>
  <context>
    <name>QgsSpitBase</name>
    <message>
      <source>SPIT - Shapefile to PostGIS Import Tool</source>
      <translation>SPIT - Utilità di importazione ESRI Shapefile in PostGIS</translation>
    </message>
    <message>
      <source>PostgreSQL Connections</source>
      <translation>Connessioni PostgreSQL</translation>
    </message>
    <message>
      <source>Remove</source>
      <translation>Rimuovi</translation>
    </message>
    <message>
      <source>Import</source>
      <translation>Importa</translation>
    </message>
    <message>
      <source>Help</source>
      <translation>Aiuto</translation>
    </message>
    <message>
      <source>Shapefile List</source>
      <translation>Lista Shapefile</translation>
    </message>
    <message>
      <source>File Name</source>
      <translation>Nome del file</translation>
    </message>
    <message>
      <source>Feature Class</source>
      <translation>Classe dell'attributo</translation>
    </message>
    <message>
      <source>Features</source>
      <translation>Elementi</translation>
    </message>
    <message>
      <source>DB Relation Name</source>
      <translation>Nome relazione database</translation>
    </message>
    <message>
      <source>Schema</source>
      <translation>Schema</translation>
    </message>
    <message>
      <source>Geometry Column Name</source>
      <translation>Noma della colonna delle geometrie</translation>
    </message>
    <message>
      <source>SRID</source>
      <translation>SRID</translation>
    </message>
    <message>
      <source>Remove All</source>
      <translation>Rimuovi tutto</translation>
    </message>
    <message>
      <source>Global Schema</source>
      <translation>Schema globale</translation>
    </message>
    <message>
      <source>Shapefile to PostGIS Import Tool</source>
      <translation>Strumento di trasferimento Shapefile in PostGIS</translation>
    </message>
    <message>
      <source>Import the defined shapefiles to PostGIS</source>
      <translation>Importa ESRI Shape file in PostGIS</translation>
    </message>
    <message>
      <source>Close</source>
      <translation>Chiudi</translation>
    </message>
    <message>
      <source>Add</source>
      <translation>Aggiungi</translation>
    </message>
    <message>
      <source>Add a shapefile to the list of files to be imported</source>
      <translation>Aggiungi uno shapefile nella lista di quelli da importare</translation>
    </message>
    <message>
      <source>Remove the selected shapefile from the import list</source>
      <translation>Rimuovi lo shapefile selezionato dalla lista</translation>
    </message>
    <message>
      <source>Remove all the shapefiles from the import list</source>
      <translation>Rimuovi tutti gli shapefile dalla lista</translation>
    </message>
    <message>
      <source>Use Default SRID</source>
      <translation>Usa il valore predefinito di SRID</translation>
    </message>
    <message>
      <source>Set the SRID to the default value</source>
      <translation>Cambia il valore di SRID con quello predefinito</translation>
    </message>
    <message>
      <source>Use Default Geometry Column Name</source>
      <translation>Usa il nome predefinito per la colonna delle geometrie</translation>
    </message>
    <message>
      <source>Set the geometry column name to the default value</source>
      <translation>Cambia il valore della colonna con le geometrie con il valore predefinito</translation>
    </message>
    <message>
      <source>New</source>
      <translation>Nuovo</translation>
    </message>
    <message>
      <source>Create a new PostGIS connection</source>
      <translation>Crea una nuova connessione PostGIS</translation>
    </message>
    <message>
      <source>Remove the current PostGIS connection</source>
      <translation>Rimuovi la connessione PostGIS in uso</translation>
    </message>
    <message>
      <source>Connect</source>
      <translation>Connetti</translation>
    </message>
    <message>
      <source>Edit</source>
      <translation>Modifica</translation>
    </message>
    <message>
      <source>Edit the current PostGIS connection</source>
      <translation>Modifica l'attuale connessione PostGIS</translation>
    </message>
  </context>
  <context>
    <name>QgsUValDialogBase</name>
    <message>
      <source>Form1</source>
      <translation>Form1</translation>
    </message>
    <message>
      <source>Classification Field:</source>
      <translation>Campo classificazione:</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
  </context>
  <context>
    <name>QgsUValMaDialogBase</name>
    <message>
      <source>Form1</source>
      <translation>Form1</translation>
    </message>
    <message>
      <source>Classification Field:</source>
      <translation>Campo classificazione:</translation>
    </message>
    <message>
      <source>New Item</source>
      <translation>Nuovo oggetto</translation>
    </message>
  </context>
  <context>
    <name>QgsVectorLayer</name>
    <message>
      <source>No features found</source>
      <translation>Nessun elemento trovato</translation>
    </message>
    <message>
      <source>No features were found in the active layer at the point you clicked</source>
      <translation>Nessun geometria presente sul vettoriale selezionato nel punto del click</translation>
    </message>
    <message>
      <source>Attribute table - </source>
      <translation>Tabella attributo - </translation>
    </message>
    <message>
      <source>&amp;Open attribute table</source>
      <translation>&amp;Apri tabella attributi</translation>
    </message>
    <message>
      <source>&lt;center>&lt;b>Vector Layer&lt;/b>&lt;/center></source>
      <translation>&lt;center>&lt;b>Vettoriale&lt;/b>&lt;/center></translation>
    </message>
    <message>
      <source>Start editing</source>
      <translation>Abilita modifica</translation>
    </message>
    <message>
      <source>Stop editing</source>
      <translation>Interrompi modifica</translation>
    </message>
    <message>
      <source>Save as shapefile...</source>
      <translation>Salva come shapefile...</translation>
    </message>
    <message>
      <source>Provider does not support deletion</source>
      <translation>Il gestore di questo formato dati non permette l'eliminazione</translation>
    </message>
    <message>
      <source>Data provider does not support deleting features</source>
      <translation>Non è possibile eliminare le geometrie per questo formato di dati</translation>
    </message>
    <message>
      <source>Layer not editable</source>
      <translation>Vettoriale non modificabile</translation>
    </message>
    <message>
      <source>The current layer is not editable. Choose 'start editing' in the legend item right click menu</source>
      <translation>Il vettoriale selezionato non è modificabile. Seleziona la voce  \&quot;avvia modifica\&quot; nella legenda  nel menu della legenda (bottone destro del mouse)</translation>
    </message>
    <message>
      <source>action</source>
      <translation>azione</translation>
    </message>
    <message>
      <source>Do you want to save the changes?</source>
      <translation>Vuoi salvare le modifiche?</translation>
    </message>
    <message>
      <source>&amp;Yes</source>
      <translation>&amp;Sì</translation>
    </message>
    <message>
      <source>&amp;No</source>
      <translation>&amp;No</translation>
    </message>
  </context>
  <context>
    <name>QgsVectorLayerPropertiesBase</name>
    <message>
      <source>Layer Properties</source>
      <translation>Proprietà del vettoriale</translation>
    </message>
    <message>
      <source>Legend type:</source>
      <translation>Tipo di legenda:</translation>
    </message>
    <message>
      <source>Layer source</source>
      <translation>Orgine del vettoriale</translation>
    </message>
    <message>
      <source>Help</source>
      <translation>Aiuto</translation>
    </message>
    <message>
      <source>F1</source>
      <translation>F1</translation>
    </message>
    <message>
      <source>Settings</source>
      <translation>Preferenze</translation>
    </message>
    <message>
      <source>OK</source>
      <translation>OK</translation>
    </message>
    <message>
      <source>Cancel</source>
      <translation>Annulla</translation>
    </message>
    <message>
      <source>TextLabel2</source>
      <translation>EtichettaTesto2</translation>
    </message>
  </context>
  <context>
    <name>QgsVectorSymbologyWidgetBase</name>
    <message>
      <source>Form2</source>
      <translation>Form2</translation>
    </message>
    <message>
      <source>Label</source>
      <translation>Etichetta</translation>
    </message>
    <message>
      <source>Min</source>
      <translation>Min</translation>
    </message>
    <message>
      <source>Max</source>
      <translation>Max</translation>
    </message>
    <message>
      <source>Rivers</source>
      <translation>Fiumi</translation>
    </message>
    <message>
      <source>1000</source>
      <translation>1000</translation>
    </message>
    <message>
      <source>10000</source>
      <translation>10000</translation>
    </message>
    <message>
      <source>Symbol Classes:</source>
      <translation>Classi di simboli:</translation>
    </message>
    <message>
      <source>Count:</source>
      <translation>Totale:</translation>
    </message>
    <message>
      <source>Mode:</source>
      <translation>Modalità: </translation>
    </message>
    <message>
      <source>Field:</source>
      <translation>Campo:</translation>
    </message>
  </context>
  <context>
    <name>SplashScreen</name>
    <message>
      <source>Version </source>
      <translation>Versione</translation>
    </message>
  </context>
  <context>
    <name>[pluginname]GuiBase</name>
    <message>
      <source>QGIS Plugin Template</source>
      <translation>Modello plugin QGIS</translation>
    </message>
    <message>
      <source>Plugin Template</source>
      <translation>Modello di plugin</translation>
    </message>
    <message>
      <source>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:12pt;font-family:Arial&quot;>
&lt;p style=&quot;margin-top:16px&quot;>&lt;span style=&quot;font-size:17pt;font-weight:600&quot;>Description&lt;/span>&lt;/p>
&lt;p>This plugin was generated using QGIS internal plugin template. Please modify it according to your needs.&lt;/p>
&lt;p>Tim Sutton&lt;/p>
&lt;p>2004&lt;/p>
&lt;/body>&lt;/html>
</source>
      <translation>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;/head>&lt;body style=&quot;font-size:12pt;font-family:Arial&quot;>&lt;p style=&quot;margin-top:16px&quot;>&lt;span style=&quot;font-size:17pt;font-weight:600&quot;>Descrizione&lt;/span>&lt;/p> 
&lt;p>Questo è un plugin QGIS di esempio. Puoi modificarlo secondo le tue esigenze.&lt;/p> 
&lt;p>Tim Sutton&lt;/p> 
&lt;p>2004&lt;/p> 
&lt;/body>&lt;/html></translation>
    </message>
    <message>
      <source>&amp;OK</source>
      <translation>&amp;OK</translation>
    </message>
    <message>
      <source>Alt+O</source>
      <translation>Alt+O</translation>
    </message>
    <message>
      <source>&amp;Cancel</source>
      <translation>&amp;Annulla</translation>
    </message>
    <message>
      <source>Alt+C</source>
      <translation>Alt +C </translation>
    </message>
  </context>
  <context>
    <name>pluginname</name>
    <message>
      <source>Replace this with a short description of the what the plugin does</source>
      <translation>Sostituisci questa breve descrizione con ciò che deve fare il plugin</translation>
    </message>
  </context>
</TS>