/************************************************************************
 * This file has been generated automatically from                      *
 *                                                                      *
 * src/core/geometry/qgslinestring.h                                    *
 *                                                                      *
 * Do not edit manually ! Edit header and run scripts/sipify.py again   *
 ************************************************************************/








class QgsLineString: QgsCurve
{
%Docstring(signature="appended")
Line string geometry type, with support for z-dimension and m-values.
%End

%TypeHeaderCode
#include "qgslinestring.h"
%End
  public:

    QgsLineString() /HoldGIL/;
%Docstring
Constructor for an empty linestring geometry.
%End

    QgsLineString( SIP_PYOBJECT points /TypeHint="Sequence[Union[QgsPoint, QgsPointXY, Sequence[float]]]"/ ) /HoldGIL/ [( const QVector<double> &x, const QVector<double> &y, const QVector<double> &z = QVector<double>(), const QVector<double> &m = QVector<double>(), bool is25DType = false )];
%Docstring
Construct a linestring from a sequence of points (:py:class:`QgsPoint` objects, :py:class:`QgsPointXY` objects, or sequences of float values).

The linestring Z and M type will be set based on the type of the first point in the sequence.

.. versionadded:: 3.20
%End
%MethodCode
    if ( !PySequence_Check( a0 ) )
    {
      PyErr_SetString( PyExc_TypeError, QStringLiteral( "A sequence of QgsPoint, QgsPointXY or array of floats is expected" ).toUtf8().constData() );
      sipIsErr = 1;
    }
    else
    {
      int state;
      const int size = PySequence_Size( a0 );
      QVector< double > xl;
      QVector< double > yl;
      bool hasZ = false;
      QVector< double > zl;
      bool hasM = false;
      QVector< double > ml;
      xl.reserve( size );
      yl.reserve( size );

      bool is25D = false;

      sipIsErr = 0;
      for ( int i = 0; i < size; ++i )
      {
        PyObject *value = PySequence_GetItem( a0, i );
        if ( !value )
        {
          PyErr_SetString( PyExc_TypeError, QStringLiteral( "Invalid type at index %1." ).arg( i ) .toUtf8().constData() );
          sipIsErr = 1;
          break;
        }

        if ( PySequence_Check( value ) )
        {
          const int elementSize = PySequence_Size( value );
          if ( elementSize < 2 || elementSize > 4 )
          {
            sipIsErr = 1;
            PyErr_SetString( PyExc_TypeError, QStringLiteral( "Invalid sequence size at index %1. Expected an array of 2-4 float values, got %2." ).arg( i ).arg( elementSize ).toUtf8().constData() );
            Py_DECREF( value );
            break;
          }
          else
          {
            sipIsErr = 0;
            for ( int j = 0; j < elementSize; ++j )
            {
              PyObject *element = PySequence_GetItem( value, j );
              if ( !element )
              {
                PyErr_SetString( PyExc_TypeError, QStringLiteral( "Invalid type at index %1." ).arg( i ) .toUtf8().constData() );
                sipIsErr = 1;
                break;
              }

              PyErr_Clear();
              double d = PyFloat_AsDouble( element );
              if ( PyErr_Occurred() )
              {
                Py_DECREF( value );
                sipIsErr = 1;
                break;
              }
              if ( j == 0 )
                xl.append( d );
              else if ( j == 1 )
                yl.append( d );

              if ( i == 0 && j == 2 )
              {
                hasZ = true;
                zl.reserve( size );
                zl.append( d );
              }
              else if ( i > 0 && j == 2 && hasZ )
              {
                zl.append( d );
              }

              if ( i == 0 && j == 3 )
              {
                hasM = true;
                ml.reserve( size );
                ml.append( d );
              }
              else if ( i > 0 && j == 3 && hasM )
              {
                ml.append( d );
              }

              Py_DECREF( element );
            }

            if ( hasZ && elementSize < 3 )
              zl.append( std::numeric_limits< double >::quiet_NaN() );
            if ( hasM && elementSize < 4 )
              ml.append( std::numeric_limits< double >::quiet_NaN() );

            Py_DECREF( value );
            if ( sipIsErr )
            {
              break;
            }
          }
        }
        else
        {
          if ( sipCanConvertToType( value, sipType_QgsPointXY, SIP_NOT_NONE ) )
          {
            sipIsErr = 0;
            QgsPointXY *p = reinterpret_cast<QgsPointXY *>( sipConvertToType( value, sipType_QgsPointXY, 0, SIP_NOT_NONE, &state, &sipIsErr ) );
            if ( !sipIsErr )
            {
              xl.append( p->x() );
              yl.append( p->y() );
            }
            sipReleaseType( p, sipType_QgsPointXY, state );
          }
          else if ( sipCanConvertToType( value, sipType_QgsPoint, SIP_NOT_NONE ) )
          {
            sipIsErr = 0;
            QgsPoint *p = reinterpret_cast<QgsPoint *>( sipConvertToType( value, sipType_QgsPoint, 0, SIP_NOT_NONE, &state, &sipIsErr ) );
            if ( !sipIsErr )
            {
              xl.append( p->x() );
              yl.append( p->y() );

              if ( i == 0 && p->is3D() )
              {
                hasZ = true;
                zl.reserve( size );
                zl.append( p->z() );
              }
              else if ( i > 0 && hasZ )
              {
                zl.append( p->z() );
              }

              if ( i == 0 && p->isMeasure() )
              {
                hasM = true;
                ml.reserve( size );
                ml.append( p->m() );
              }
              else if ( i > 0 && hasM )
              {
                ml.append( p->m() );
              }

              if ( i == 0 && p->wkbType() == Qgis::WkbType::Point25D )
                is25D = true;
            }
            sipReleaseType( p, sipType_QgsPoint, state );
          }
          else
          {
            sipIsErr = 1;
          }

          Py_DECREF( value );

          if ( sipIsErr )
          {
            // couldn't convert the sequence value to a QgsPoint or QgsPointXY
            PyErr_SetString( PyExc_TypeError, QStringLiteral( "Invalid type at index %1. Expected QgsPoint, QgsPointXY or array of floats." ).arg( i ) .toUtf8().constData() );
            break;
          }
        }
      }
      if ( sipIsErr == 0 )
        sipCpp = new sipQgsLineString( QgsLineString( xl, yl, zl, ml, is25D ) );
    }
%End

    explicit QgsLineString( const QgsLineSegment2D &segment ) /HoldGIL/;
%Docstring
Construct a linestring from a single 2d line segment.

.. versionadded:: 3.2
%End

    QgsLineString( const QVector<double> &x, const QVector<double> &y,
                   const QVector<double> &z = QVector<double>(),
                   const QVector<double> &m = QVector<double>(), bool is25DType = false ) /HoldGIL/;
%Docstring
Construct a linestring from arrays of coordinates. If the z or m
arrays are non-empty then the resultant linestring will have
z and m types accordingly.
This constructor is more efficient then calling :py:func:`~QgsLineString.setPoints`
or repeatedly calling :py:func:`~QgsLineString.addVertex`

If the ``z`` vector is filled, then the geometry type will either
be a LineStringZ(M) or LineString25D depending on the ``is25DType``
argument. If ``is25DType`` is ``True`` (and the ``m`` vector is unfilled) then
the created Linestring will be a LineString25D type. Otherwise, the
LineString will be LineStringZ (or LineStringZM) type.

If the sizes of ``x`` and ``y`` are non-equal then the resultant linestring
will be created using the minimum size of these arrays.
%End

    QgsLineString( const QgsPoint &p1, const QgsPoint &p2 ) /HoldGIL/;
%Docstring
Constructs a linestring with a single segment from ``p1`` to ``p2``.

.. versionadded:: 3.2
%End

    static QgsLineString *fromBezierCurve( const QgsPoint &start, const QgsPoint &controlPoint1, const QgsPoint &controlPoint2, const QgsPoint &end, int segments = 30 ) /Factory/;
%Docstring
Returns a new linestring created by segmentizing the bezier curve between ``start`` and ``end``, with
the specified control points.

The ``segments`` parameter controls how many line segments will be present in the returned linestring.

Any z or m values present in the input coordinates will be interpolated along with the x and y values.

.. versionadded:: 3.10
%End

    static QgsLineString *fromQPolygonF( const QPolygonF &polygon ) /Factory/;
%Docstring
Returns a new linestring from a QPolygonF ``polygon`` input.

.. versionadded:: 3.10
%End

  public:
    virtual bool fuzzyEqual( const QgsAbstractGeometry &other, double epsilon = 1e-8 ) const /HoldGIL/;

    virtual bool fuzzyDistanceEqual( const QgsAbstractGeometry &other, double epsilon = 1e-8 ) const /HoldGIL/;

    virtual bool equals( const QgsCurve &other ) const;



    SIP_PYOBJECT pointN( int i ) const /TypeHint="QgsPoint"/;
%Docstring
Returns the point at the specified index.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      std::unique_ptr< QgsPoint > p;
      if ( a0 >= 0 )
        p = std::make_unique< QgsPoint >( sipCpp->pointN( a0 ) );
      else // negative index, count backwards from end
        p = std::make_unique< QgsPoint >( sipCpp->pointN( count + a0 ) );
      sipRes = sipConvertFromType( p.release(), sipType_QgsPoint, Py_None );
    }
%End


    virtual double xAt( int index ) const;

%Docstring
Returns the x-coordinate of the specified node in the line string.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 >= 0 )
        return PyFloat_FromDouble( sipCpp->xAt( a0 ) );
      else
        return PyFloat_FromDouble( sipCpp->xAt( count + a0 ) );
    }
%End


    virtual double yAt( int index ) const;

%Docstring
Returns the y-coordinate of the specified node in the line string.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 >= 0 )
        return PyFloat_FromDouble( sipCpp->yAt( a0 ) );
      else
        return PyFloat_FromDouble( sipCpp->yAt( count + a0 ) );
    }
%End











    virtual double zAt( int index ) const;

%Docstring
Returns the z-coordinate of the specified node in the line string.

If the LineString does not have a z-dimension then ``NaN`` will be returned.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 >= 0 )
        return PyFloat_FromDouble( sipCpp->zAt( a0 ) );
      else
        return PyFloat_FromDouble( sipCpp->zAt( count + a0 ) );
    }
%End


    virtual double mAt( int index ) const;

%Docstring
Returns the m-coordinate of the specified node in the line string.

If the LineString does not have a m-dimension then ``NaN`` will be returned.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 >= 0 )
        return PyFloat_FromDouble( sipCpp->mAt( a0 ) );
      else
        return PyFloat_FromDouble( sipCpp->mAt( count + a0 ) );
    }
%End


    void setXAt( int index, double x );
%Docstring
Sets the x-coordinate of the specified node in the line string.
The corresponding node must already exist in line string.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.

.. seealso:: :py:func:`xAt`
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 >= 0 )
        sipCpp->setXAt( a0, a1 );
      else
        sipCpp->setXAt( count + a0, a1 );
    }
%End


    void setYAt( int index, double y );
%Docstring
Sets the y-coordinate of the specified node in the line string.
The corresponding node must already exist in line string.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.

.. seealso:: :py:func:`yAt`
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 >= 0 )
        sipCpp->setYAt( a0, a1 );
      else
        sipCpp->setYAt( count + a0, a1 );
    }
%End


    void setZAt( int index, double z );
%Docstring
Sets the z-coordinate of the specified node in the line string.
The corresponding node must already exist in line string and the line string must have z-dimension.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.

.. seealso:: :py:func:`zAt`
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 >= 0 )
        sipCpp->setZAt( a0, a1 );
      else
        sipCpp->setZAt( count + a0, a1 );
    }
%End


    void setMAt( int index, double m );
%Docstring
Sets the m-coordinate of the specified node in the line string.
The corresponding node must already exist in line string and the line string must have m-dimension.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified index exists.

.. seealso:: :py:func:`mAt`
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 >= 0 )
        sipCpp->setMAt( a0, a1 );
      else
        sipCpp->setMAt( count + a0, a1 );
    }
%End


    void setPoints( const QgsPointSequence &points );
%Docstring
Resets the line string to match the specified list of points. The line string will
inherit the dimensionality of the first point in the list.

:param points: new points for line string. If empty, line string will be cleared.
%End

    void append( const QgsLineString *line );
%Docstring
Appends the contents of another line string to the end of this line string.

:param line: line to append. Ownership is not transferred.
%End

    void addVertex( const QgsPoint &pt );
%Docstring
Adds a new vertex to the end of the line string.

:param pt: vertex to add
%End

    void close();
%Docstring
Closes the line string by appending the first point to the end of the line, if it is not already closed.
%End

    virtual QgsCompoundCurve *toCurveType() const /Factory/;

%Docstring
Returns the geometry converted to the more generic curve type :py:class:`QgsCompoundCurve`

:return: the converted geometry. Caller takes ownership
%End

    void extend( double startDistance, double endDistance );
%Docstring
Extends the line geometry by extrapolating out the start or end of the line
by a specified distance. Lines are extended using the bearing of the first or last
segment in the line.
%End


    virtual QString geometryType() const /HoldGIL/;

    virtual int dimension() const /HoldGIL/;

    virtual QgsLineString *clone() const /Factory/;

    virtual void clear();

    virtual bool isEmpty() const /HoldGIL/;

    int indexOf( const QgsPoint &point ) const final;
    virtual bool isValid( QString &error /Out/, Qgis::GeometryValidityFlags flags = Qgis::GeometryValidityFlags() ) const;

    virtual QgsLineString *snappedToGrid( double hSpacing, double vSpacing, double dSpacing = 0, double mSpacing = 0, bool removeRedundantPoints = false ) const /Factory/;

    virtual bool removeDuplicateNodes( double epsilon = 4 * DBL_EPSILON, bool useZValues = false );

    virtual bool isClosed() const /HoldGIL/;

    virtual bool isClosed2D() const /HoldGIL/;

    virtual bool boundingBoxIntersects( const QgsRectangle &rectangle ) const /HoldGIL/;

    virtual bool boundingBoxIntersects( const QgsBox3D &box3d ) const /HoldGIL/;


    QVector< QgsVertexId > collectDuplicateNodes( double epsilon = 4 * DBL_EPSILON, bool useZValues = false ) const;
%Docstring
Returns a list of any duplicate nodes contained in the geometry, within the specified tolerance.

If ``useZValues`` is ``True`` then z values will also be considered when testing for duplicates.

.. versionadded:: 3.16
%End

    virtual QPolygonF asQPolygonF() const;


    virtual QgsLineString *simplifyByDistance( double tolerance ) const /Factory/;

    virtual bool fromWkb( QgsConstWkbPtr &wkb );

    virtual bool fromWkt( const QString &wkt );


    virtual int wkbSize( QgsAbstractGeometry::WkbFlags flags = QgsAbstractGeometry::WkbFlags() ) const;

    virtual QByteArray asWkb( QgsAbstractGeometry::WkbFlags flags = QgsAbstractGeometry::WkbFlags() ) const;

    virtual QString asWkt( int precision = 17 ) const;

    virtual QDomElement asGml2( QDomDocument &doc, int precision = 17, const QString &ns = "gml", QgsAbstractGeometry::AxisOrder axisOrder = QgsAbstractGeometry::AxisOrder::XY ) const;

    virtual QDomElement asGml3( QDomDocument &doc, int precision = 17, const QString &ns = "gml", QgsAbstractGeometry::AxisOrder axisOrder = QgsAbstractGeometry::AxisOrder::XY ) const;

    virtual QString asKml( int precision = 17 ) const;


    virtual double length() const /HoldGIL/;



    QVector<QgsLineString *> splitToDisjointXYParts() const /Factory/;
%Docstring
Divides the linestring into parts that don't share any points or lines.

This method throws away Z and M coordinates.

The ownership of returned pointers is transferred to the caller.

.. versionadded:: 3.40
%End

    double length3D() const /HoldGIL/;
%Docstring
Returns the length in 3D world of the line string.
If it is not a 3D line string, return its 2D length.

.. seealso:: :py:func:`length`

.. versionadded:: 3.10
%End
    virtual QgsPoint startPoint() const /HoldGIL/;

    virtual QgsPoint endPoint() const /HoldGIL/;


    virtual QgsLineString *curveToLine( double tolerance = M_PI_2 / 90, SegmentationToleranceType toleranceType = MaximumAngle ) const  /Factory/;

%Docstring
Returns a new line string geometry corresponding to a segmentized approximation
of the curve.

:param tolerance: segmentation tolerance
:param toleranceType: maximum segmentation angle or maximum difference between approximation and curve
%End

    virtual int numPoints() const /HoldGIL/;

    virtual int nCoordinates() const /HoldGIL/;

    virtual void points( QgsPointSequence &pt /Out/ ) const;


    virtual void draw( QPainter &p ) const;


    virtual void transform( const QgsCoordinateTransform &ct, Qgis::TransformDirection d = Qgis::TransformDirection::Forward, bool transformZ = false )  throw( QgsCsException );

    virtual void transform( const QTransform &t, double zTranslate = 0.0, double zScale = 1.0, double mTranslate = 0.0, double mScale = 1.0 );


    virtual void addToPainterPath( QPainterPath &path ) const;

    virtual void drawAsPolygon( QPainter &p ) const;


    virtual bool insertVertex( QgsVertexId position, const QgsPoint &vertex );

    virtual bool moveVertex( QgsVertexId position, const QgsPoint &newPos );

    virtual bool deleteVertex( QgsVertexId position );


    virtual QgsLineString *reversed() const /Factory/;

    virtual QgsPoint *interpolatePoint( double distance ) const /Factory/;

    virtual QgsLineString *curveSubstring( double startDistance, double endDistance ) const /Factory/;


    virtual double closestSegment( const QgsPoint &pt, QgsPoint &segmentPt /Out/, QgsVertexId &vertexAfter /Out/, int *leftOf /Out/ = 0, double epsilon = 4 * DBL_EPSILON ) const;

    virtual bool pointAt( int node, QgsPoint &point, Qgis::VertexType &type ) const;


    virtual QgsPoint centroid() const;


    virtual void sumUpArea( double &sum /Out/ ) const;

%Docstring
Calculates the shoelace/triangle formula sum for the points in the linestring.
If the linestring is closed (i.e. a polygon) then the polygon area is equal to the absolute value of the sum.
Please note that the sum will be negative if the points are defined in clockwise order.
Therefore, if you want to use the sum as an area (as the method name indicates) then you probably should use the absolute value,
since otherwise a bug can be introduced (such as the bug fixed for github issue 49578)

.. seealso:: https://en.wikipedia.org/wiki/Shoelace_formula#Triangle_formula
%End

    virtual double vertexAngle( QgsVertexId vertex ) const;

    virtual double segmentLength( QgsVertexId startVertex ) const;

    virtual bool addZValue( double zValue = 0 );

    virtual bool addMValue( double mValue = 0 );


    virtual bool dropZValue();

    virtual bool dropMValue();

    virtual void swapXy();


    virtual bool convertTo( Qgis::WkbType type );


    virtual bool transform( QgsAbstractGeometryTransformer *transformer, QgsFeedback *feedback = 0 );

    void scroll( int firstVertexIndex ) final;


    virtual QgsLineString *createEmptyWithSameType() const /Factory/;


    SIP_PYOBJECT __repr__();
%MethodCode
    QString wkt = sipCpp->asWkt();
    if ( wkt.length() > 1000 )
      wkt = wkt.left( 1000 ) + QStringLiteral( "..." );
    QString str = QStringLiteral( "<QgsLineString: %1>" ).arg( wkt );
    sipRes = PyUnicode_FromString( str.toUtf8().constData() );
%End

    SIP_PYOBJECT __getitem__( int index ) /TypeHint="QgsPoint"/;
%Docstring
Returns the point at the specified ``index``.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified ``index`` exists.

.. versionadded:: 3.6
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      std::unique_ptr< QgsPoint > p;
      if ( a0 >= 0 )
        p = std::make_unique< QgsPoint >( sipCpp->pointN( a0 ) );
      else
        p = std::make_unique< QgsPoint >( sipCpp->pointN( count + a0 ) );
      sipRes = sipConvertFromType( p.release(), sipType_QgsPoint, Py_None );
    }
%End

    void __setitem__( int index, const QgsPoint &point );
%Docstring
Sets the point at the specified ``index``.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified ``index`` exists.

.. versionadded:: 3.6
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      if ( a0 < 0 )
        a0 = count + a0;
      sipCpp->setXAt( a0, a1->x() );
      sipCpp->setYAt( a0, a1->y() );
      if ( sipCpp->isMeasure() )
        sipCpp->setMAt( a0, a1->m() );
      if ( sipCpp->is3D() )
        sipCpp->setZAt( a0, a1->z() );
    }
%End


    void __delitem__( int index );
%Docstring
Deletes the vertex at the specified ``index``.

Indexes can be less than 0, in which case they correspond to positions from the end of the line. E.g. an index of -1
corresponds to the last point in the line.

:raises IndexError: if no point with the specified ``index`` exists.

.. versionadded:: 3.6
%End
%MethodCode
    const int count = sipCpp->numPoints();
    if ( a0 >= 0 && a0 < count )
      sipCpp->deleteVertex( QgsVertexId( -1, -1, a0 ) );
    else if ( a0 < 0 && a0 >= -count )
      sipCpp->deleteVertex( QgsVertexId( -1, -1, count + a0 ) );
    else
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
%End


 QgsBox3D calculateBoundingBox3d() const /Deprecated/;
%Docstring
Calculates the minimal 3D bounding box for the geometry.
Deprecated: use calculateBoundingBox3D instead

.. seealso:: :py:func:`calculateBoundingBox`

.. versionadded:: 3.26

.. deprecated:: 3.34
%End

    virtual QgsBox3D calculateBoundingBox3D() const;

%Docstring
Calculates the minimal 3D bounding box for the geometry.

.. seealso:: :py:func:`calculateBoundingBox`

.. versionadded:: 3.34
%End

    QgsLineString *measuredLine( double start, double end ) const /Factory/;
%Docstring
Re-write the measure ordinate (or add one, if it isn't already there) interpolating
the measure between the supplied ``start`` and ``end`` values.

.. versionadded:: 3.36
%End

    QgsLineString *interpolateM( bool use3DDistance = true ) const /Factory/;
%Docstring
Returns a copy of this line with all missing (NaN) m values interpolated
from m values of surrounding vertices.

If the line does not contain m values, ``None`` is returned.

The ``use3DDistance`` controls whether 2D or 3D distances between vertices
should be used during interpolation. This option is only considered for lines
with z values.

.. seealso:: :py:func:`lineLocatePointByM`

.. versionadded:: 3.38
%End

    bool lineLocatePointByM( double m, double &x /Out/, double &y /Out/, double &z /Out/, double &distanceFromStart /Out/, bool use3DDistance = true ) const;
%Docstring
Attempts to locate a point on the linestring by m value.

This method will linearly interpolate along line segments to find the point which corresponds to the specified m value.

If the linestring contains sections with constant m values matching ``m``, then the interpolated point will be located
at the center of these sections.

Any missing (NaN) values in the linestring will be linearly interpolated from the
m values of surrounding vertices (see :py:func:`~QgsLineString.interpolateM`).

:param m: target m value
:param use3DDistance: controls whether 2D or 3D distances between vertices should be used during interpolation. This option is only considered for lines with z values.

:return: - ``True`` if a matching point was found, or ``False`` if it could not be found
         - x: interpolated x coordinate
         - y: interpolated y coordinate
         - z: interpolated z coordinate (for 3D lines only)
         - distanceFromStart: calculated distance from the start of the linestring to the located point

.. seealso:: :py:func:`interpolateM`

.. versionadded:: 3.40
%End

  protected:

    int compareToSameClass( const QgsAbstractGeometry *other ) const final;

};


/************************************************************************
 * This file has been generated automatically from                      *
 *                                                                      *
 * src/core/geometry/qgslinestring.h                                    *
 *                                                                      *
 * Do not edit manually ! Edit header and run scripts/sipify.py again   *
 ************************************************************************/