@default OGR Driver Manager OGR Driver Manager unable to get OGRDriverManager imposibil de accesat OGRDriverManager Open an OGR Supported Vector Layer Deschide un strat accesat de OGR is not a valid or recognized data source nu este o sursa accesibila Invalid Data Source Sursa de date corupta Invalid Layer Layer corupt %1 is an invalid layer and cannot be loaded. %1 este un layer corupt si nu poate fi accesat. Save As Salvare Ca Choose a QGIS project file to open Alegeţi un fisier de proiect QGIS QGIS Project Read Error Eroare de citire a fisierului proiect Try to find missing layers? inceracti sa gasiti straturi disparute? Unable to open project Imposibil de citit proiectul Choose a QGIS project file Alegeţi un fisier de proiect QGIS Saved project to: Proiect salvat in: Unable to save project Imposibil de salvat proiectul Unable to save project to Imposibil de salvat proiectul in Unable to save project Imposibil de salvat proiectul Choose a filename to save the QGIS project file as Alegeţi un nume sub care să salvaţi proiectul QGIS: Unable to load project QGIS: Imposibil de citit proiectul Unable to load project Imposibil de citit proiectul Saved map image to Harta salvata in: No Layer Selected Nu există nici un layer selectat To delete features, you must select a vector layer in the legend Pentru a sterge obiecte, trebuie ales un layer activ apăsînd pe numele lui în legendă No Vector Layer Selected Nu este selectat nici un layer tip vector Deleting features only works on vector layers Stergerea de obiecte este posibila doar pentru straturi tip vector Provider does not support deletion Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Data provider does not support deleting features Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Layer not editable Layerul nu este editabil The current layer is not editable. Choose 'Start editing' in the digitizing toolbar. Layerul curent nu este editabil. Apasati 'Permisiune de Editare' in bara de unelte pentru vectorizare. Problem deleting features A apruta o problema la stergerea de obiecte A problem occured during deletion of features A apruta o problema la stergerea de obiecte Error Loading Plugin Eroare la incarcare plugin-uri There was an error loading %1. Eroare la incarcarea %1. No MapLayer Plugins Nu există Plugin-uri pentru Straturi Harta No MapLayer plugins in ../plugins/maplayer Nu există Plugin-uri pentru Straturi Harta in ../plugins/maplayer No Plugins Nu există Plugin-uri No plugins found in ../plugins. To test plugins, start qgis from the src directory Nu există Plugin-uri in ../plugins. Pentru a le putea testa, porniti QGIS din directorul sursa (src). Name Nume Plugin %1 is named %2 Pluginul %1 se numeste %2 Plugin Information Informatii plugin QGis loaded the following plugin: QGIS a incarcat dinamic urmatorul plugin: Name: %1 Nume: %1 Version: %1 Versiune: %1 Description: %1 Descriere: %1 Unable to Load Plugin Nu se poate incarca acest plugin QGIS was unable to load the plugin from: %1 QGIS nu a putut incarca dinamic acest plugin din: %1 There is a new version of QGIS available O noua versiune QGIS este disponibila You are running a development version of QGIS Rulati o versiune QGIS pentru dezvoltatori You are running the current version of QGIS Felicitari. Rulati cea mai recenta versiune QGIS. Would you like more information? Ati dori mai multe informatii? QGIS - Changes in SVN Since Last Release Modificari QGIS de la utima versiune Unable to get current version information from server Nu se poate obtine legatura cu serverul de informatii Connection refused - server may be down Conexiune refuzata - serverul poate fi inactiv QGIS server was not found Serverul QGIS nu este disponibil QGIS Browser Selection Selectarea Browser-ului pentru QGIS Enter the name of a web browser to use (eg. konqueror). Introduceti numele browser-ului de Internet (de exemplu konqueror). Enter the full path if the browser is not in your PATH. Introduceti calea absoluta, daca aplicatia nu se afla in variabila de system PATH You can change this option later by selecting Options from the Settings menu (Help Browser tab). Puteti modifica aceasta optiune mai tarziu selectand Optiuni din meniul de setari. Layer is not valid Layer corupt The layer is not a valid layer and can not be added to the map Stratul tematic este corupt si nu poate fi adaugat in harta. Save? Salvare? Extents: Dimensiuni: Clipboard contents set to: Continutul clipboardului setat cu: Open a GDAL Supported Raster Data Source Deschide un strat tematic tip raster accesat de GDAL is not a valid or recognized raster data source nu este o sursa raster valida is not a supported raster data source nu este o sursa raster accesibila Unsupported Data Source Sursa de Date nu este suportata de QGIS New Bookmark Bookmark Nou Enter a name for the new bookmark: Introduceţi numele noului bookmark: Error Eroare Unable to create the bookmark. Your user database may be missing or corrupted Nu se poate crea acest bookmark. BeataDialog Move selected to top Mutaţi elementele selectate deasupra Invert selection Inversaţi selecţia Search string parsing error Eroarea la analizarea criteriului de căutare Search results Căutare în rezultate You've supplied an empty search string. Nu aţi introdus criteriul de căutare. Error during search Eroare la căutare Found %d matching features. No matching features found. Nu au fost găsite caracteristici corespunzătoare. BeataDialogGui Search Căutare in în Attribute Table Tabela de atribute Remove selection Înlăturaţi selecţia Move selected to top Mutaţi elementele selectate deasupra Ctrl+T Ctrl+T Invert selection Inversaţi selecţia Copy selected rows to clipboard (Ctrl+C) Copiaţi liniile selectate (Ctrl+C) Copies the selected rows to the clipboard Copiază liniile selectate Ctrl+C Ctrl+C Ctrl+J Ctrl+J Măsurare suprafaţă ... ... CoordinateCapture Coordinate Capture Click on the map to view coordinates and capture to clipboard. &Coordinate Capture Click to select the CRS to use for coordinate display Coordinate in your selected CRS Coordinate in map canvas coordinate reference system Copy to clipboard Click to enable mouse tracking. Click the canvas to stop Start capture Click to enable coordinate capture CoordinateCaptureGuiBase QGIS Plugin Template Matriţă pentru QGIS Plugin Plugin Template Matriţă Plugin Dialog Name Nume Version Versiune Description Descriere: Add Adauga Edit Editare Delete Ştergere Size Dimensiuni ... ... Connect Conectare Browse Selectaţi OGR Converter Open OGR file OGR File Data Source (*.*) Open Directory Input OGR dataset is missing! Input OGR layer name is missing! Target OGR format not selected! Output OGR dataset is missing! Output OGR layer name is missing! Choose a file name to save to Could not establish connection to: '%1' Successfully translated layer '%1' Failed to translate layer '%1' Successfully connected to: '%1' fTools About fTools Version x.x-xxxxxx <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> </body></html> Help Ajutor Web Close Închidere Extract Nodes Input line or polygon vector layer Tolerance Unique ID field Output point shapefile Geoprocessing Input vector layer Intersect layer Buffer distance Buffer distance field Dissolve field Dissolve buffer results Output shapefile Locate Line Intersections Input line layer Input unique ID field Intersect line layer Intersect unique ID field Output Shapefile Join Attributes Target vector layer Target join field Join data Join vector layer Join dbf table Join field Output table Only keep matching records Keep all records (includeing non-matching target records) Generate Centroids creating new selection adding to current selection removing from current selection Select by location Select features in: that intersect features in: Modify current selection by: Please specify input layer Please specify select layer Sum line lengths Sum Line Lengths In Polyons Please specify input polygon vector layer Please specify input line vector layer Please specify output length field length field Random selection within subsets Please specify input vector layer Please specify an input field Shapefiles (*.shp) Cannot overwrite existing shapefile... Random Points unstratified stratified density field Unknown layer type... Weight field Number of standard deviations Std. Dev. Regular points Please properly specify extent coordinates Created output point shapefile: %1 Note: Layer has no associated coordinate system, please use the Projection Management Tool to specify spatial reference system. Would you like to add the new layer to the TOC? Create Distance Matrix Input point layer Target point layer Target unique ID field Output matrix type Linear (N*k x 3) distance matrix Standard (N x T) distance matrix Summary distance matrix (mean, std. dev., min, max) Use only the nearest (k) target points: Output distance matrix Use only selected features Line intersections Please specify input line layer Please specify output shapefile Please specify line intersect layer Please specify input unique ID field Please specify intersect unique ID field Created output point shapefile: %1 Would you like to add the new layer to the TOC? Vector layer is not valid Export to new projection No input layer specified Define current projection Please specify spatial reference system Created projected shapefile: %1 Would you like to add the new layer to the TOC? Choose output CRS: Please select the projection system to be used by the output layer. Output layer will be projected from it's current CRS to the output CRS. No Valid CRS selected Output spatial reference system is not valid Identical output spatial reference system chosen Join attributes Please specify target vector layer Please specify join vector layer Please specify target join field Please specify join field Please specify input table Created output shapefile: %1 Would you like to add the new layer to the TOC? Join Table Input table does not exist joined fields Mean coordinates Standard distance (Optional) Weight field (Optional) Unique ID field Coordinate statistics No input vector layer specified Join attributes by location Please specify at least one summary statistic CRS warning! Warning: Input layers have non-matching CRS. This may cause unexpected results. Summary field Vector grid Please specify valid extent coordinates Invalid extent coordinates entered Generate Vector Grid Created output shapefile: %1 Note: Layer has no associated coordinate system, please use the Projection Management Tool to specify spatial reference system. Would you like to add the new layer to the TOC? Count Points In Polygons Input polygon vector layer Input point vector layer Output count field name PNTCNT Generate Random Points Input Boundary Layer Minimum distance between points Sample Size Unstratified Sampling Design (Entire layer) Use this number of points Stratified Sampling Design (Individual polygons) Use this density of points Use value from input field No input shapefile specified Cannot define projection for PostGIS data...yet! Unable to dynamically define projection. Please reload layer manually for projection definition to take effect. Defined Projection For: %1.shp Please select the projection system that defines the current layer. Layer CRS information will be updated to the selected CRS. Split vector layer Created output shapefiles in folder: %1 Random selection Random Selection Tool Count Points in Polygon Count Points In Polygon Please specify input point vector layer Please specify output count field point count field Counts Points In Polygon Distance matrix Create Point Distance Matrix Please specify input point layer Please specify output file Please specify target point layer Please specify target unique ID field Created output matrix: The goal of fTools is to provide a one-stop resource for many common vector-based GIS tasks, without the need for additional software, libraries, or complex workarounds. fTools is designed to extend the functionality of Quantum GIS using only core QGIS and python libraries. It provides a growing suite of spatial data management and analysis functions that are both quick and functional. In addition, the geoprocessing functions of Dr. Horst Duester and Stefan Ziegler have been incorporated to futher facilitate and streamline GIS based research and analysis. If you would like to report a bug, make suggestions for improving fTools, or have a question about the tools, please email me: carson.farmer@gmail.com LICENSING INFORMATION: fTools is copyright (C) 2009 Carson J.Q. Farmer Geoprocessing functions adapted from 'Geoprocessing Plugin', (C) 2008 by Dr. Horst Duester, Stefan Ziegler licensed under the terms of GNU GPL 2 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ACKNOWLEDGEMENTS: The following individuals (whether they know it or not) have contributed ideas, help, testing, code, and guidence towards this project, and I thank them. Hawthorn Beyer Borys Jurgiel Tim Sutton Barry Rowlingson Horst Duester and Stefan Ziegler Paolo Cavallini Aaron Racicot Colin Robertson Agustin Lobo Jurgen E. Fischer QGis developer and user communities Folks on #qgis at freenode.net All those who have reported bugs/fixes/suggestions/comments/etc. Input Vector Layer Randomly Select Number of Features Percentage of Features % Projection Management Tool Input spatial reference system Output spatial reference system Use predefined spatial reference system Choose Import spatial reference system from existing layer Import spatial reference system: Generate Regular Points Input Coordinates X Min Y Min X Max Y Max Grid Spacing Use this point spacing Apply random offset to point spacing Initial inset from corner (LH side) Spatial Join Attribute Summary Take attributes of first located feature Take summary of intersecting features Mean Media Min Min Max Max Sum Output Shapefile: Random Selection From Within Subsets Input subset field (unique ID field) Sum Line Length In Polygons Output summed length field name LENGTH Input line vector layer Grid extent Update extents from layer Update extents from canvas Parameters X Lock 1:1 ratio Y Output grid as polygons Output grid as lines Vector Split Output folder List Unique Values Target field Unique values list Unique value count OGR Layer Converter DlgAddRelation ... ... Create Creaza DlgDownloadOSM Extent Extent ... ... DlgLoadOSM ... ... DlgSaveOSM ... ... DlgSymbolV2Properties Symbol properties Symbol preview: Symbol layer type: Symbol layer properties This symbol layer doesn't have GUI for settings. Symbol layers: Add symbol layer Remove symbol layer Lock layer's color Move up Mutaţi mai sus Move down Mutaţi mai jos DlgUploadOSM 1 1 2 2 EngineConfigDialog Dialog Search method Chain (fast) Popmusic Tabu Popmusic Chain Popmusic Tabu Chain FALP (fastest) Number of candidates Point Punct Line Linie Polygon Poligon Show all labels (i.e. including colliding labels) Show label candidates (for debugging) GeometryDialog Merge all Geometry Please specify input vector layer Please specify output shapefile Please specify valid tolerance value Please specify valid UID field Singleparts to multipart Output shapefile Multipart to singleparts Extract nodes Polygons to lines Input polygon vector layer Export/Add geometry columns Input vector layer Simplify geometries Polygon centroids Output point shapefile Delaunay triangulation Input point vector layer Polygon from layer extent Input layer Output polygon shapefile Geoprocessing Unable to delete existing shapefile. Cancel Error processing specified tolerance! Please choose larger tolerance... Unable to delete incomplete shapefile. Created output shapefile: %1 Would you like to add the new layer to the TOC? Error writing output shapefile. Geoprocessing Exit Iesire 0.0 0.0 Browse Selectaţi GeoprocessingDialog Dissolve all Geoprocessing Please specify an input layer Please specify a difference/intersect/union layer Please specify valid buffer value Please specify dissolve field Please specify output shapefile No features selected, please uncheck 'Use selected' or make a selection Buffer(s) Create single minimum convex hull Create convex hulls based on input field Convex hull(s) Dissolve Difference layer Difference Intersect layer Intersect Symetrical difference Clip layer Clip Union layer Union Unable to delete existing shapefile. Cancel Warnings: Some output geometries may be missing or invalid. Would you like to add the new layer anyway? Would you like to add the new layer to the TOC? Input CRS error: Different input coordinate reference systems detected, results may not be as expected. Feature geometry error: One or more output features ignored due to invalid geometry. GEOS geoprocessing error: One or more input features have invalid geometry. Created output shapefile: %1 %2%3 Close Închidere Gui Welcome to your automatically generated plugin! This is just a starting point. You now need to modify the code to make it do something useful....read on for a more information to get yourself started. Documentation: You really need to read the QGIS API Documentation now at: In particular look at the following classes: QgsPlugin is an ABC that defines required behaviour your plugin must provide. See below for more details. What are all the files in my generated plugin directory for? This is the generated CMake file that builds the plugin. You should add you application specific dependencies and source files to this file. This is the class that provides the 'glue' between your custom application logic and the QGIS application. You will see that a number of methods are already implemented for you - including some examples of how to add a raster or vector layer to the main application map canvas. This class is a concrete instance of the QgisPlugin interface which defines required behaviour for a plugin. In particular, a plugin has a number of static methods and members so that the QgsPluginManager and plugin loader logic can identify each plugin, create an appropriate menu entry for it etc. Note there is nothing stopping you creating multiple toolbar icons and menu entries for a single plugin. By default though a single menu entry and toolbar button is created and its pre-configured to call the run() method in this class when selected. This default implementation provided for you by the plugin builder is well documented, so please refer to the code for further advice. This is a Qt designer 'ui' file. It defines the look of the default plugin dialog without implementing any application logic. You can modify this form to suite your needs or completely remove it if your plugin does not need to display a user form (e.g. for custom MapTools). This is the concrete class where application logic for the above mentioned dialog should go. The world is your oyster here really.... This is the Qt4 resources file for your plugin. The Makefile generated for your plugin is all set up to compile the resource file so all you need to do is add your additional icons etc using the simple xml file format. Note the namespace used for all your resources e.g. (':/Homann/'). It is important to use this prefix for all your resources. We suggest you include any other images and run time data in this resurce file too. This is the icon that will be used for your plugin menu entry and toolbar icon. Simply replace this icon with your own icon to make your plugin disctinctive from the rest. This file contains the documentation you are reading now! Getting developer help: For Questions and Comments regarding the plugin builder template and creating your features in QGIS using the plugin interface please contact us via: <li> the QGIS developers mailing list, or </li><li> IRC (#qgis on freenode.net)</li> QGIS is distributed under the Gnu Public License. If you create a useful plugin please consider contributing it back to the community. Have fun and thank you for choosing QGIS. KDChartParams Legend Legendă Square Pătrat Diamond Romb Circle Cerc One pixel Un pixel Four pixels Patru pixeli Ring Inel Cross Cruce fast Cross Cruce rapidă Labeling Labeling Replace this with a short description of what the plugin does &Labeling LabelingGuiBase Layer labeling settings Label this layer Field with labels Placement Pozitionare around point over point parallel curved horizontal over centroid around centroid horizontal (slow) free (slow) using perimeter Label distance pixels Rotation degrees above line on line below line Orientation Orientare map line Text style Font TextLabel ... ... Color Culoare Buffer Size Dimensiuni Sample Lorem Ipsum Priority Low High Scale-based visibility Enabled Minimum Maximum label every part of multi-part features merge connected lines to avoid duplicate labels features don't act as obstacles for labels Engine settings MapCoordsDialogBase Enter map coordinates Introduceţi coordonatele hărţii X: X: Y: Y: &OK &OK &Cancel &Renunţă NavigationGui ... ... Stop Opreste Status Starea actuala &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C NewPostgisLayer Delete Ştergere Edit Editare New Noua Connect Conectare Help Ajutor F1 F1 Ok Ok OgrConverterGuiBase OGR Layer Converter Source Format File Fişier Directory Remote source Dataset Browse Selectaţi Layer Target OgrPlugin Run OGR Layer Converter Replace this with a short description of the what the plugin does A se înlocui cu o scurtă descriere a functionalitatii acestui plugin OG&R Converter Translates vector layers between formats supported by OGR library OracleConnectGuiBase Create Oracle Connection Connection Information Informaţii conexiune Name Nume Database instance Username Nume Utilizator (Login) Password Parola Name of the new connection Numele conexiunii noi Save Password OsmAddRelationDlg Create OSM relation Relation type: ... ... Properties Members Create Creaza Cancel Show type description Shows brief description of selected relation type. Generate tags Fills tag table with tags that are typical for relation of specified type. Remove all selected tags Removes all selected tags. Select member on map Starts process of selecting next relation member on map. Remove all selected members Removes all selected members. OSM Information OsmDockWidget ... ... R R Adaugă layer tip Raster 1 1 OsmDownloadDlg Download OSM data Extent Extent Latitude: From To Longitude: <nothing> ... ... Download to: Open data automatically after download Replace current data (current layer will be removed) Use custom renderer Download Cancel OSM Download Unable to save the file %1: %2. Waiting for OpenStreetMap server ... Download process failed. OpenStreetMap server response: %1 - %2 OSM Download Error Download failed: %1. Getting data The OpenStreetMap server you are downloading OSM data from (~ api.openstreetmap.org) has fixed limitations of how much data you can get. As written at <http://wiki.openstreetmap.org/wiki/Getting_Data> neither latitude nor longitude extent of downloaded region can be larger than 0.25 degrees. Note that Quantum GIS allows you to specify any extent you want, but OpenStreetMap server will reject all request that won't satisfy downloading limitations. Both extents are too large! Latitude extent is too large! Longitude extent is too large! OK! Area is probably acceptable to server. OsmFeatureDW OSM Plugin The 'Create OSM Relation' dialog was closed automatically because current OSM database was changed. OSM Feature Dock Widget Choose OSM feature first. Choose relation for editing first. OSM Feature ... ... Create point Create line Create polygon Create relation Undo Redo Show/Hide OSM Edit History Feature: TYPE, ID: CREATED: USER: unknown Properties Remove selected tags Relations Add relation Edit relation Remove relation Relation tags: 1 1 Relation members: Identify feature Move feature Remove this feature OsmImportDlg Import data to OSM In this dialog you can import a layer loaded in QGIS into active OSM data. Layer Import only current selection OsmLoadDlg Load OSM OpenStreetMap file to load: ... ... Add columns for tags: Use custom renderer Replace current data (current layers will be removed) OsmSaveDlg Save OSM to file Unable to save the file %1: %2. Initializing... Saving nodes... Saving lines... Saving polygons... Saving relations... Save OSM Where to save: ... ... Features to save: Points Lines Polygons Relations Tags OsmUndoRedoDW OSM Edit History Clear all ... ... Undo Redo OsmUndoRedoDockWidget ... ... OsmUploadDlg OSM Upload Uploading data... Upload OSM data Ready for upload 1 1 2 2 3 4 5 Comment on your changes: OSM account Username: Password: Show password Save password Python An error has occured while executing Python code: Python version: Python path: Python error Couldn't load plugin '%1' from ['%2'] Couldn't load plugin %1 %1 due an error when calling its classFactory() method %1 due an error when calling its initGui() method Error while unloading plugin %1 QFileDialog Save experiment report to portable document format (.pdf) Load layer properties from style file (.qml) Save layer properties as style file (.qml) QObject Series Serii Item Element Value Valoare Caught a coordinate system exception while trying to transform a point. Unable to calculate line length. Eroare interceptată în sistemul de coordonate la transformarea unui punct. Nu a fost posibilă calcularea lungimii liniei. Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area. Eroare interceptată în sistemul de coordonate la transformarea unui punct. Nu a fost posibilă calcularea ariei poligonului. Label Etichetă No Data Provider Plugins No QGIS data provider plugins found in: Nu există Plugin-uri pentru accesarea datelor Nu a fost găsit nici un Plugin pentru accesarea de date QGIS în No vector layers can be loaded. Check your QGIS installation Nu a putut fi încărcat nici un layer vectorial. Verificaţi instalarea QGIS No Data Providers Nici un furnizor de date No data provider plugins are available. No vector layers can be loaded Nu este disponibil nici un Plugin pentru accesarea de date. Nu a putut fi încărcat nici un layer vectorial Regular expressions on numeric values don't make sense. Use comparison insted. Operaţiile logice nu au sens pentru valori numerice. Utilizaţi comparaţii. Referenced column wasn't found: Coloana respectivă nu afost gasită: Division by zero. Împărţire la zero. Open an OGR Supported Layer Deschide un layer OGR QGis files (*.qgs) Fişiere QGIS (*.qgs) No active layer Nu există nici un layer activat To identify features, you must choose an layer active by clicking on its name in the legend Pentru a putea indetifica obiecte, trebuie ales un layer activ apăsînd pe numele lui în legendă Band Bandă Length Lungime Area Suprafaţă action acţiune features found obiecte găsite 1 feature found 1 obiect găsit No features found Nici un obiect nu a fost găsit No features were found in the active layer at the point you clicked Nici un obiect nu a fost găsit in stratul activ, în punctul selectat Could not identify objects on Nu s-a putut identifica obiecte în because deoarece To select features, you must choose an layer active by clicking on its name in the legend Pentru a putea selecta obiecte, trebuie ales un layer activ apăsînd pe numele lui în legendă Could not snap segment. Have you set the tolerance in Settings > Project Properties > General? Nu s-a putut potrivi segmentul. Verificati toleranţa din Setari > Opţiuni Proiect > General? Could not snap vertex. Have you set the tolerance in Settings > Project Properties > General? Nu s-a putut potrivi vertexul. Verificati toleranţa din Setari > Opţiuni Proiect > General? Project file read error: Eroare la citire fişier proiect: at line la linia column coloana for file pentru fisierul Unable to save to file Nu se poate salva în fişier Fit to a linear transform requires at least 2 points. Pentru o transformare liniară este nevoie de cel puţin 2 puncte. Fit to a Helmert transform requires at least 2 points. Pentru o transformare Helmert este nevoie de cel puţin 2 puncte. Fit to an affine transform requires at least 4 points. Pentru o transformare afină este nevoie de cel puţin 4 puncte. New centroid Centroid nou New point Punct nou New vertex Vertex nou Undo last point Înapoi la starea anterioară Close line Închide linia Select vertex Selectează vertex Select new position Selectează poziţie nouă Select line segment Selectează segment New vertex position Poziţie vertex nouă Release Lasă Liber Delete vertex Sterge Vertex Release vertex Lasă vertexul liber Select element Selectează element New location Locaţie nouă Release selected Lăsare liber este selectat Delete selected / select next Stergere este selectat Select position on line Selectează poziţia pe linie Split the line Împarte linia Release the line Lăsare liberă a liniei Select point on line Selectează punct pe linie Couldn't open the data source: Nu s-a putut accesa sursa de date: Parse error at line Eroare de parsare la linia GPS eXchange format provider Furnizor date pentru formatul GPS eXchange GRASS plugin Plugin GRASS QGIS couldn't find your GRASS installation. Would you like to specify path (GISBASE) to your GRASS installation? QGIS nu a găsit instalarea GRASS. Doriţi să specificaţi calea (GISBASE) către instalarea GRASS? Choose GRASS installation path (GISBASE) Alegeţi calea către instalarea GRASS (GISBASE) GRASS data won't be available if GISBASE is not specified. Datele GRASS nu vor fi disponibile dacă nu specificaţi calea (GISBASE) către instalarea GRASS. CopyrightLabel Draws copyright information Version 0.1 Version 0.2 Loads and displays delimited text files containing x,y coordinates Add Delimited Text Layer GPS Tools Tools for loading and importing GPS data GRASS GRASS layer NorthArrow Displays a north arrow overlayed onto the map [menuitemname] [plugindescription] ScaleBar Draws a scale bar SPIT Shapefile to PostgreSQL/PostGIS Import Tool WFS plugin Adds WFS layers to the QGIS canvas Layer cannot be added to Stratul nu poate fi adaugat la The data provider for this layer does not support the addition of features. Furnizorul de date corespunzator acestui layer nu suporta adaugarea de obiecte. Layer not editable Layerul nu este editabil Python error Error Eroare km2 ha m2 m km mm cm sq mile sq ft mile foot feet sq.deg. degree degrees unknown Regular expressions on numeric values don't make sense. Use comparison instead. Geoprocessing functions for working with PostgreSQL/PostGIS layers Raster Cannot open raster header Rows Columns N-S resolution E-W resolution North South East West Format Minimum value Maximum value Data source Data description Comments Categories Vector Points Lines Boundaries Centroids Faces Kernels Areas Islands Top Bottom yes no History Layer Features Driver Database Baza de date Table Key column Region Cannot open region header XY UTM SP LL Other Projection Type Zone 3D Cols 3D Rows Depths E-W 3D resolution N-S 3D resolution GISBASE is not set. Mapset is already in use. Warning Atenţie This tool only supports vector data No active layers found Cannot read raster map region Cannot read vector map region Cannot read region PostgreSQL Geoprocessing Quick Print Quick Print is a plugin to quickly print a map with minimal effort. Abort Renunta Couldn't load SIP module. Python support will be disabled. Couldn't load PyQt4. Couldn't load PyQGIS. Couldn't load QGIS utils. Python version: Python path: An error occured during execution of following code: Legend Legendă Coordinate Capture Capture mouse coordinates in different CRS Dxf2Shp Converter Converts from dxf to shp file format Interpolating... Interpolation plugin A plugin for interpolation based on vertices of a vector layer Version 0.001 OGR Layer Converter Translates vector layers between formats supported by OGR library Error Loading Plugin Eroare la incarcare plugin-uri There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue: %1. Where is '%1' (original location: %2)? Error when reading metadata of plugin %1 No QGIS data provider plugins found in: %1 Referenced column wasn't found: %1 Location: %1 Location: %1 Mapset: %2 Couldn't open the data source: %1 Parse error at line %1 : %2 %1 is not a GRASS mapset. Cannot start %1/etc/lock Temporary directory %1 exists but is not writable Cannot create temporary directory %1 Cannot create %1 Cannot remove mapset lock: %1 Cannot start module command: %1 %2 %3 %4 Cannot get projection Cannot get raster extent Cannot query raster Georeferencer GDAL Georeferencing rasters using GDAL Version 3.1.9 SQLite DB (*.sqlite);;All files (*.*) Oracle Spatial GeoRaster Access Oracle Spatial GeoRaster Deleted vertices Moved vertices eVis An event visualization tool - view images associated with vector features Version 1.1.0 Building triangulation... Estimating normal derivatives... Generated CRS A CRS automatically generated from layer info get this prefix for description Raster Terrain Analysis plugin A plugin for raster based terrain analysis W W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) E S N N Crează un nou layer tip Vector Diagram Overlay A plugin for placing diagrams on vector layers Version 0.0.1 Single Symbol Simbol Unic Categorized Graduated Labeling Smart labeling for vector layers %n geometry error(s) found. number of geometry errors invalid line segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7 stopping validation after more than 100 errors ring %1 with less than three points ring %1 not closed line %1 with less than two points line %1 contains %n duplicate node(s) at %2 number of duplicate nodes segments %1 and %2 of line %3 intersect at %4 ring %1 of polygon %2 not in exterior ring polygon %1 inside polygon %2 Unknown geometry type OGR driver for '%1' not found (OGR error: %2) trimming attribute name '%1' to ten significant characters produces duplicate column name. creation of data source failed (OGR error:%1) creation of layer failed (OGR error:%1) unsupported type for field %1 creation of field %1 failed (OGR error: %2) Failed to transform a point while drawing a feature of type '%1'. Writing stopped. (Exception: %2) Groups not yet supported Cannot draw raster QextSerialPort No Error has occurred Invalid file descriptor (port was not opened correctly) Unable to allocate memory tables (POSIX) Caught a non-blocked signal (POSIX) Operation timed out (POSIX) The file opened by the port is not a valid device The port detected a break condition The port detected a framing error (usually caused by incorrect baud rate settings) There was an I/O error while communicating with the port Character buffer overrun Receive buffer overflow The port detected a parity error in the received data Transmit buffer overflow General read operation failure General write operation failure Unknown error: %1 QgisApp Quantum GIS - Quantum GIS - Checking database Verificare a bazei de date Reading settings Setări de citire Setting up the GUI Setare GUI Restoring loaded plugins Reincarcare plugin-uri Initializing file filters Initializare filtre pentru fisiere Restoring window state Reincarcare fereastra QGIS Ready! QGIS este pregatit pentru utilizare! &New Project Proiect &Nou Ctrl+N New Project Ctrl+N Proiect Nou New Project Proiect Nou &Open Project... &Deschide Proiect... Ctrl+O Open a Project Ctrl+O Deschide Proiect Open a Project Deschide Proiect &Save Project &Salvare Proiect Ctrl+S Save Project Ctrl+S Salvare Proiect Save Project Salvare Proiect Save Project &As... Sal&vare Proiect ca... Ctrl+A Save Project under a new name Ctrl+A Salvare Proiect sub un nume nou Save Project under a new name Salvare Proiect sub un nume nou &Print... &Imprimare... Ctrl+P Print Ctrl+P Imprimare Print Ctrl+P Save as Image... Salvare ca imagine... Ctrl+I Save map as image Ctrl+I Salvare hartă ca imagine Save map as image Salvare hartă ca imagine Export to MapServer Map... Exportare pentru MapServer... M Export as MapServer .map file M Exportare fisier .map pentru MapServer Export as MapServer .map file Exportare fisier .map pentru MapServer Exit Iesire Ctrl+Q Exit QGIS Ctrl+Q Iesire din QGIS Exit QGIS Iesire din QGIS Add a Vector Layer... Adaugă layer tip Vector... V Add a Vector Layer V Adaugă layer tip Vector Add a Vector Layer Adaugă layer tip Vector Add a Raster Layer... Adaugă layer tip Raster... R Add a Raster Layer R Adaugă layer tip Raster Add a Raster Layer Adaugă layer tip Raster Add a PostGIS Layer... Adaugă layer tip PostGIS... D Add a PostGIS Layer D Adaugă layer tip PostGIS Add a PostGIS Layer Adaugă layer tip PostGIS New Vector Layer... Crează un nou layer tip Vector... N Create a New Vector Layer N Crează un nou layer tip Vector Create a New Vector Layer Crează un nou layer tip Vector Remove Layer Îndepărtează Layer Ctrl+D Remove a Layer Ctrl+D Îndepărtează Layer Remove a Layer Îndepărtează Layer Add All To Overview Adaugă tot în Zona de Previzualizare + Show all layers in the overview map + Adaugă toate straturile tematice în Zona de Previzualizare Show all layers in the overview map Adaugă toate straturile tematice în Zona de Previzualizare Remove All From Overview Elimină toate straturile tematice din Zona de Previzualizare - Remove all layers from overview map - Elimină toate straturile tematice din Zona de Previzualizare Remove all layers from overview map Elimină toate straturile tematice din Zona de Previzualizare Show All Layers Arată toate straturile tematice S Show all layers S Arată toate straturile tematice Show all layers Arată toate straturile tematice Hide All Layers Ascunde toate straturile tematice H Hide all layers H Ascunde toate straturile tematice Hide all layers Ascunde toate straturile tematice Project Properties... Opţiuni Proiect... P Set project properties P Setaţi Opţiuni Proiect Set project properties Setaţi Opţiuni Proiect Options... Opţiuni... Change various QGIS options Schimbaţi diverse opţiuni QGIS Custom Projection... Proiecţie Customizată... Manage custom projections Administrare Proiecţii Customizate Help Contents Ajutor conţinut Ctrl+? Help Documentation (Mac) Ctrl+? Documentaţie (Mac) F1 Help Documentation F1 Help Documentation Documentaţie Qgis Home Page Pagina QGIS Home Ctrl+H QGIS Home Page Ctrl+H Pagina QGIS Home QGIS Home Page Pagina QGIS Home About Despre About QGIS Despre Quantum GIS Check Qgis Version Versiunea QGIS Check if your QGIS version is up to date (requires internet access) Verificaţi dacă Versiunea dvs. QGIS este cea mai recentă (este nevoie de access la Internet) Refresh Actualizează Ctrl+R Refresh Map Ctrl+R Actualizează Refresh Map Actualizează Harta Zoom In Apropiere Ctrl++ Zoom In Ctrl++ Apropiere Zoom Out Depărtare Ctrl+- Zoom Out Ctrl+- Depărtare Zoom Full Vedere de ansamblu F Zoom to Full Extents F Vedere de ansamblu Zoom to Full Extents Vedere de ansamblu Zoom To Selection Apropiere de Selecţie Ctrl+F Zoom to selection Ctrl+F Apropiere de Selecţie Zoom to selection Apropiere de Selecţie Pan Map Mişcare hartă Pan the map Mişcare hartă Zoom Last Înapoi la ultimul nivel de zoom Zoom to Last Extent Înapoi la ultimul nivel de zoom Zoom To Layer Focusare pe Layer Zoom to Layer Focusare pe Layer Identify Features Identifică obiecte I Click on features to identify them I Faceţi click pe obiecte pentru a le identifica Click on features to identify them Faceţi click pe obiecte pentru a le identifica Select Features Selectaţi Obiecte Open Table Deschide tabela de atribute Measure Line Măsurare distanţe liniare Ctrl+M Measure a Line Ctrl+M Măsurare distanţe liniare Measure a Line Măsurare distanţe liniare Measure Area Măsurare suprafaţă Ctrl+J Measure an Area Ctrl+J Măsurare suprafaţă Measure an Area Măsurare suprafaţă Show Bookmarks Arată bookmark-uri B Show Bookmarks B Arată bookmark-uri Show most toolbars Arată barele de unelte S Show most toolbars S Arată barele de unelte Hide most toolbars Ascunde barele de unelte H Hide most toolbars H Ascunde barele de unelte New Bookmark... Bookmark Nou... Ctrl+B New Bookmark Ctrl+BBookmark Nou New Bookmark Bookmark Nou Add WMS Layer... Adăugare layer WMS W Add Web Mapping Server Layer W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) Add Web Mapping Server Layer Adăugare layer generat de un Serviciu de Hărţi Web (WMS) In Overview În Vedere de Ansamblu O Add current layer to overview map O Adaugă stratul tematic curent în Vedere de Ansamblu Add current layer to overview map Adaugă stratul tematic curent în Vedere de Ansamblu Plugin Manager... Administrare plugin-uri... Open the plugin manager Deschide fereastra de Administrare plugin-uri Start editing the current layer Începe editarea stratului curent Stop editing the current layer Opreşte editarea stratului curent Capture Point Vectorizare Punct . Capture Points . Vectorizare Punct Capture Points Vectorizare Punct Capture Line Vectorizare Linie / Capture Lines / Vectorizare Linie Capture Lines Vectorizare Linie Capture Polygon Vectorizare Poligon Ctrl+/ Capture Polygons Ctrl+/ Vectorizare Poligon Capture Polygons Vectorizare Poligon Delete Seleced Sterge Obiecte Selectate Delete Selected Sterge Obiecte Selectate Add Vertex Adaugă Vertex Delete Vertex Şterge Vertex Move Vertex Mută Vertex Cut Features Extragere Obiecte Cut selected features Extragere Obiecte Selectate Copy Features Copiere Obiecte Copy selected features Copiere Obiecte Selectate Paste Features Adăugare Obiecte Paste selected features Adăugare Obiecte Selectate &File &Fişier &Open Recent Projects &Deschide Proiect Recent... &View &Vizualizare &Toolbars... &Unelte &Layer Strat &Tematic &Settings &Optiuni &Plugins &Plugin-uri &Help &Ajutor File Fişier Manage Layers Administrare Straturi Tematice Help Ajutor Digitizing Digitizare Map Navigation Navigaţie hartă Attributes Atribute Plugins Plugin-uri Progress bar that displays the status of rendering layers and other time-intensive operations Arată evoluţia randării hărţii sau a altor operaţii ce necesită mult timp Displays the current map scale Arată scara curentă a hărţii Shows the map coordinates at the current cursor postion. The display is continuously updated as the mouse is moved. Arată coorinatele hartă ale poziţiei mausului. Render Randare (Producere imagine) When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering. Când sunt selectate, straturile sunt afişate. Când nu sunt selectate, straturile nu vor fi randate şi astfel se permite adaugarea unui mare număr de straturi înainte de randare. Toggle map rendering Schimbă opţiunea de randare This icon shows whether on the fly projection is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour. Această iconiţă arată daca proiecţia automată este selectată sau nu. Această opţiune este selectaă din fereatra de Opţiuni Proiect. Projection status - Click to open projection dialog Proiectie - faceti click pentru a deschide fereastra de dialog pentru proiectii Ready Gata Map canvas. This is where raster and vector layers are displayed when added to the map Suprafata de afisare. Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas. Suprafata de previzualizare a hartii. Dimensiunea actuala a hartii este desenata cu un dreptunghi rosu. Orice layer poate fi adaugat in acest overview. Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties. Legenda hartii, ce arată toate straturile. Faceti click pe casuta de selectie pentru a arata sau a ascunde orice strat. Faceti dublu click pentru a customiza stratul respectiv. Version Versiune with PostgreSQL support cu suport PostgreSQL (no PostgreSQL support) fara suport PostgreSQL Compiled against Qt Compilata cu Qt , running against Qt , bazata pe Qt Quantum GIS is licensed under the GNU General Public License Quantum GIS este licentiat sub GNU General Public License http://www.gnu.org/licenses http://www.gnu.org/licenses Version Versiune New features Posibilitati noi WMS support Suport WMS Improved vector and attribute editing Editare date imbunatatita Map Composer for creating map layouts Creator de harti pentru definirea de harti pentru imprimare Improved measure tools with area measuring Unelte de masurare imbunatatite Attribute searching Cautare atribute New legend structure Structura noua a legendei Refactoring of API to allow the use of QGIS libraries in mapping applications Un API ce permite utilizarea librariilor QGIS in alte aplicatii. Improved MapServer export tool Export catre MapServer imbunatatit Map canvas background color is customizable Culoarea de fundal este customizabila Vector layer transparency Transparenta a straturilor tematice Antialiasing for vector layers Antialiasing pentru straturi tip vector GRASS support in all platforms Support GRASS multiplatforma Enhanced GRASS support and toolbox commands Support pentru GRASS imbunatatit Enhanced vector editing, including copy/paste, snapping and vertex editing Suport editare vector imbunatatit Shapefile/OGR layer editing Suport editare SHP/OGR Option to only look in the geometry_columns table when searching for PostGIS layers Optiune citire doar a tabelei geometry_columns pentru un layer PostGIS Many user interface improvements Foarte multe imbunatatiri de interfata cu utilizatorul Available Data Provider Plugins Plugin-uri pentru accesarea datelor Open an OGR Supported Vector Layer Deschide un strat accesat de OGR is not a valid or recognized data source nu este o sursa accesibila Invalid Data Source Sursa de date corupta Invalid Layer Layer corupt %1 is an invalid layer and cannot be loaded. %1 este un layer corupt si nu poate fi accesat. Save As Salvare Ca Choose a QGIS project file to open Alegeţi un fisier de proiect QGIS QGIS Project Read Error Eroare de citire a fisierului proiect Try to find missing layers? inceracti sa gasiti straturi disparute? Unable to open project Imposibil de citit proiectul Choose a QGIS project file Alegeţi un fisier de proiect QGIS Saved project to: Proiect salvat in: Unable to save project Imposibil de salvat proiectul Unable to save project to Imposibil de salvat proiectul in Unable to save project Imposibil de salvat proiectul Choose a filename to save the QGIS project file as Alegeţi un nume sub care să salvaţi proiectul QGIS: Unable to load project QGIS: Imposibil de citit proiectul Unable to load project Imposibil de citit proiectul Choose a filename to save the map image as Alegeţi un nume sub care să salvaţi imaginea hartii Saved map image to Harta salvata in: No Layer Selected Nu există nici un layer selectat To open an attribute table, you must select a layer in the legend Pentru a putea afisa tabela de atribute, trebuie ales un layer activ apăsînd pe numele lui în legendă Problem deleting features A apruta o problema la stergerea de obiecte A problem occured during deletion of features A apruta o problema la stergerea de obiecte No Vector Layer Selected Nu este selectat nici un layer tip vector Deleting features only works on vector layers Stergerea de obiecte este posibila doar pentru straturi tip vector To delete features, you must select a vector layer in the legend Pentru a sterge obiecte, trebuie ales un layer activ apăsînd pe numele lui în legendă Error Loading Plugin Eroare la incarcare plugin-uri There was an error loading %1. Eroare la incarcarea %1. No MapLayer Plugins Nu există Plugin-uri pentru Straturi Harta No MapLayer plugins in ../plugins/maplayer Nu există Plugin-uri pentru Straturi Harta in ../plugins/maplayer No Plugins Nu există Plugin-uri No plugins found in ../plugins. To test plugins, start qgis from the src directory Nu există Plugin-uri in ../plugins. Pentru a le putea testa, porniti QGIS din directorul sursa (src). Name Nume Plugin %1 is named %2 Pluginul %1 se numeste %2 Plugin Information Informatii plugin QGis loaded the following plugin: QGIS a incarcat dinamic urmatorul plugin: Name: %1 Nume: %1 Version: %1 Versiune: %1 Description: %1 Descriere: %1 Unable to Load Plugin Nu se poate incarca acest plugin QGIS was unable to load the plugin from: %1 QGIS nu a putut incarca dinamic acest plugin din: %1 There is a new version of QGIS available O noua versiune QGIS este disponibila You are running a development version of QGIS Rulati o versiune QGIS pentru dezvoltatori You are running the current version of QGIS Felicitari. Rulati cea mai recenta versiune QGIS. Would you like more information? Ati dori mai multe informatii? Yes Da No Nu QGIS - Changes in SVN Since Last Release Modificari QGIS de la utima versiune Unable to get current version information from server Nu se poate obtine legatura cu serverul de informatii Connection refused - server may be down Conexiune refuzata - serverul poate fi inactiv QGIS server was not found Serverul QGIS nu este disponibil Error reading from server Eroare la citire informatii server Unable to connect to the QGIS Version server Nu se poate face conexiunea cu serverul de versiune QGIS QGIS Browser Selection Selectarea Browser-ului pentru QGIS Enter the name of a web browser to use (eg. konqueror). Introduceti numele browser-ului de Internet (de exemplu konqueror). Enter the full path if the browser is not in your PATH. Introduceti calea absoluta, daca aplicatia nu se afla in variabila de system PATH You can change this option later by selecting Options from the Settings menu (Help Browser tab). Puteti modifica aceasta optiune mai tarziu selectand Optiuni din meniul de setari. Layer is not valid Layer corupt The layer is not a valid layer and can not be added to the map Stratul tematic este corupt si nu poate fi adaugat in harta. Save? Salvare? Do you want to save the current project? Doriti salvarea proiectului curent? Extents: Dimensiuni: Clipboard contents set to: Continutul clipboardului setat cu: Open a GDAL Supported Raster Data Source Deschide un strat tematic tip raster accesat de GDAL is not a valid or recognized raster data source nu este o sursa raster valida is not a supported raster data source nu este o sursa raster accesibila Unsupported Data Source Sursa de Date nu este suportata de QGIS Enter a name for the new bookmark: Introduceţi numele noului bookmark: Error Eroare Unable to create the bookmark. Your user database may be missing or corrupted Nu se poate crea acest bookmark. Ctrl+T Hide most toolbars Ctrl+T Checking provider plugins Starting Python Provider does not support deletion Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Data provider does not support deleting features Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Layer not editable Layerul nu este editabil The current layer is not editable. Choose 'Start editing' in the digitizing toolbar. Layerul curent nu este editabil. Apasati 'Permisiune de Editare' in bara de unelte pentru vectorizare. Toggle editing Toggles the editing state of the current layer Add Ring Scale Current map scale (formatted as x:y) Map coordinates at mouse cursor position Invalid scale QGIS Version Information Network error while communicating with server Unknown network socket error Do you want to save the current project? Move Feature Split Features Map Tips Show information about a feature when the mouse is hovered over it Current map scale Project file is older <tt>Settings:Options:General</tt> Menu path to setting options Warn me when opening a project file saved with an older version of QGIS Ctrl-F Toggle fullscreen mode Toggle fullscreen mode Resource Location Error Error reading icon resources from: %1 Quitting... Overview Legend Legendă You are using QGIS version %1 built against code revision %2. This binary was compiled against Qt %1,and is currently running against Qt %2 Stop map rendering Multiple Instances of QgisApp Multiple instances of Quantum GIS application object detected. Please contact the developers. Shift+Ctrl+S Save Project under a new name Ctrl+P Print Composer Ctrl+P Imprimare &Undo Ctrl+Z Undo the last operation Cu&t Quantum GIS Ctrl+X Ctrl+X Cut the current selection's contents to the clipboard &Copy Ctrl+C Ctrl+C Copy the current selection's contents to the clipboard &Paste Ctrl+V Paste the clipboard's contents into the current selection &Redo Ctrl+Shift+Z Redo the last operation Merge selected features Node Tool M Measure a Line M Exportare fisier .map pentru MapServer Zoom to Selection Ctrl+J Zoom to Selection Ctrl+J Măsurare suprafaţă Zoom Actual Size Zoom to Actual Size Add Vector Layer... Add Raster Layer... Add PostGIS Layer... W Add a Web Mapping Server Layer W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) Add a Web Mapping Server Layer Open Attribute Table Save as Shapefile... Save the current layer as a shapefile Save Selection as Shapefile... Save the selection as a shapefile Live GPS tracking Show GPS tool Properties... Set properties of the current layer Add to Overview Ctrl+Shift+O Add current layer to overview map Add All to Overview Ctrl+Shift+U Show all layers Ctrl+Shift+H Hide all layers Manage Plugins... Toggle Full Screen Mode Ctrl+Shift+P Set project properties Custom CRS... Manage custom coordinate reference systems Minimize Ctrl+M Minimize Window Ctrl+M Măsurare distanţe liniare Minimizes the active window to the dock Zoom Toggles between a predefined size and the window size set by the user Bring All to Front Bring forward all open windows Style manager... Show style manager V2 Failed to open Python console: Print Composers &Edit Panels Toolbars &Window Toggle extents and mouse position display Coordinate: Current map coordinate Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. Current map coordinate (formatted as x,y) This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour. CRS status - Click to open coordinate reference system dialog This copy of QGIS has been built with PostgreSQL support. This copy of QGIS has been built without PostgreSQL support. This copy of QGIS has been built with QWT support (%1). This copy of QGIS has been built without QWT support. This copy of QGIS writes debugging output. Whats new in Version 1.4.0? Please note that this is a release in our 'cutting edge' release series. As such it contains new features and extends the programmatic interface over QGIS 1.0.x and QGIS 1.3.0. If an unchanging user interface, programmatic API and long term support is more important to you then cool new and untested features, we recommend that you use a copy of QGIS from our Long Term Support (LTS)1.0.x release series. In all other cases we recommend that you use this version. This release includes around 200 bug fixes, nearly 30 new features and has had a lot of love and attention poured in to it to take our favourite desktop GIS application another step on the road to GIS nirvana! So much has happened in the 3 months since our last release that it is impossible to document everything here. Instead we will just highlight a couple of important new features for you. Probably the biggest new feature is the addition of the new vector symbology infrastructure. This is provided alongside the old implementation - you can switch using a button in the vector layer properties dialog. It does't replace the old symbology implementation completely yet because there are various issues that need to be resolved and a large amount of testing before it is considered ready. QGIS now has a field calculator, accessible via a button in the attribute section of the vector properties, and from the attribute table user interface. You can use feature length, feature area, string concatenation and type conversions in the field calculator, as well as field values. The map composer has had a lot of attention. A grid can now be added to composer maps. Composer maps can now be rotated in the layout. The limitation of a single map layout per project has been removed. A new composer manager dialog has been added to manage the existing composer instances. The composer widget property sheets have been completely overhauled to use less screen space Various parts of the user interface have been overhauled with the goal of improving consistency and to improve support for netbooks and other smaller screen devices. Loading and saving of shortcuts. Position can now be displayed as Degrees, Minutes, Seconds in the status bar. The add, move and delete vertex buttons are now removed and the node tool is moved from the advanced editing toolbar to the standard editing toolbar. The identification tool has also undergone numerous improvements. A render caching capability has been added to QGIS. This speeds up common operations such as layer re-ordering, changing symbology, WMS / WFS client, hiding / showing layers and opens the door for future enhancements such as threaded rendering and pre-compositing layer cache manipulation. Note that it is disabled by default, and can be enabled in the options dialog. User defined SVG search paths are now added to the options dialog. When creating a new shapefile, you can now specify its CRS. Also the avoid intersections option for polygons is now also possible with background layers. For power users, you can now create customizable attribute forms using Qt Designer dialog UIs. New Shapefile Shapefiles must end on .shp Choose a file name to save the QGIS project file as Choose a file name to save the map image as Features deleted Merging features... Abort Renunta Composer %1 No active layer Nu există nici un layer activat No active layer found. Please select a layer in the layer list Active layer is not vector The merge features tool only works on vector layers. Please select a vector layer from the layer list Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing The merge tool requires at least two selected features Merge failed An error occured during the merge operation The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled Merged features Features cut Features pasted Start editing failed Nu se poate incepe editarea Provider cannot be opened for editing Furnizorul de date nu poate fi accesat pentru editare. Stop editing Încetaţi editarea Do you want to save the changes to layer %1? Problems during roll back Probleme la aducerea in starea anterioara (roll back) GPS Information Python Console Map coordinates for the current view extents Extents: Dimensiuni: Maptips require an active layer Warning Atenţie This layer doesn't have a properties dialog. Quantum GIS - %1 ('%2') &New Print Composer Ctrl+P New Print Composer Ctrl+P Imprimare New Print Composer Composer manager... Composer manager Ctrl+. Capture Points Ctrl+/ Capture Lines Ctrl+/ Vectorizare Poligon Ctrl+Shift+/ Capture Polygons Reshape Features Add Part Add part to multipolygon Click a vertex of the ring to delete Click a vertex of the part to delete Rotate Point Symbols Deselect features from all layers Ctrl+Shift+I Click on features to identify them Ctrl+Shift+M Measure a Line Ctrl+Shift+J Measure an Area Measure Angle Ctrl+Shift+F Zoom to Full Extents Ctrl+Shift+B Show Bookmarks Ctrl+Shift+N Create a New Vector Layer Ctrl+Shift+V Add a Vector Layer Ctrl+Shift+R Add a Raster Layer Ctrl+Shift+D Add a PostGIS Layer Ctrl+Shift+L Add a SpatiaLite Layer Ctrl+Shift+W Add a Web Mapping Server Layer %1 is not a valid or recognized data source QGis files (*.qgs) Fişiere QGIS (*.qgs) Saved project to: %1 Unable to save project %1 Saved map image to %1 Could not commit changes to layer %1 Errors: %2 QGIS - Changes in SVN since last release Unable to communicate with QGIS Version server %1 %1 is not a valid or recognized raster data source %1 is not a supported raster data source This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.Version of the project file: %1 Current version of QGIS: %2 Layers Layere (Straturi) Delete features Delete %n feature(s)? number of features to delete Add SpatiaLite Layer... Add a SpatiaLite Layer This copy of QGIS has been built with SpatiaLite support. This copy of QGIS has been built without SpatiaLite support. Zoom Next Zoom to Forward Extent Simplify Feature Delete Ring Delete Part Configure shortcuts... Configure shortcuts Advanced Digitizing QgisAppBase MainWindow Fereastra Principală Legend Legendă Map View Vizualizarea Hărţii QGIS QgsAbout QGIS Sponsors Sponsori QGIS The following have sponsored QGIS by contributing money to fund development and other project costs QGIS a fost sponsorizat de Name Nume Website Website QGIS Browser Selection Selectarea Browser-ului pentru QGIS Enter the name of a web browser to use (eg. konqueror). Enter the full path if the browser is not in your PATH. You can change this option later by selection Options from the Settings menu (Help Browser tab). Introduceţi numele Web Browser-ului pe care doriţi să-l utilizaţi (ex.: konqueror). Introduceţi calea completă dacă Browser-ul nu este in PATH-ul dvs. Puteţi modifica această opţiune mai târziu selectînd din Settings menu tab-ul Options. About Quantum GIS Despre Quantum GIS About Despre <h2>Quantum GIS (qgis)</h2> <h2>Quantum GIS (qgis)</h2> Version Versiune <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> Quantum GIS is licensed under the GNU General Public License http://www.gnu.org/licenses</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">Quantum GIS este licenţiat sub licenţa GNU General Public Licensehttp://www.gnu.org/licenses</body></html> QGIS Home Page Pagina QGIS Home Subscribe to the QGIS-User mailing list Abonare la lista de mail a utilizatorilor QGIS What's New Ce este nou Developers Dezvoltatori <h2>QGIS Developers</h2> <h2>Dezvoltatori QGIS</h2> Providers Furnizori Contributors Sponsors Sponsori Donors Ok Ok Quantum GIS is licensed under the GNU General Public License Quantum GIS este licentiat sub GNU General Public License <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> Quantum GIS (QGIS)</body></html> http://www.gnu.org/licenses http://www.gnu.org/licenses Join our user mailing list QGIS sponsorship programme:contribute to QGIS development The following individuals and institutions have contributed money to fund QGIS development and other project costs The following have contributed to QGIS by translating the user interface or documentation Language Names Available QGIS Data Provider Plugins Available Qt Database Plugins Available Qt Image Plugins Qt Image Plugin Search Paths Translators QgsAddAttrDialogBase Add Attribute Adăugaţi Atribut N&ame Comment Type Tip Width Lăţime Precision Precizie OK OK Cancel Renuţare Type: Tip: Name: Nume: QgsApplication Exception QgsAttributeActionDialog Name Nume Select an action File dialog window title Missing Information To create an attribute action, you must provide both a name and the action to perform. QgsAttributeActionDialogBase Form1 Form1 Remove the selected action Ştergeţi acţiunea selectată Remove Ştergeţi Move the selected action down Mutaţi acţiunea selectată mai jos Move down Mutaţi mai jos Move the selected action up Mutaţi acţiunea selectată mai sus Move up Mutaţi mai sus This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Insert action button. Actions can be edited here by double clicking on the item. Această listă conţine toate acţiunile definite pentru Layer-ul curent. Adăugaţi acţiuni introducînd detaliile mai jos, apoi apăsînd butonul Inserare acţiune. Acţiunile pot fi editate apăsînd dublu clic pe elementul respectiv. The valid attribute names for this layer Numele atributelor valide pentru acest Layer Browse for action commands Selectaţi comenzile pentru acţiuni Browse Selectaţi Inserts the selected field into the action, prepended with a % Inseraţi câmpul selectat în acţiune, precedat de % Insert field Inseraţi câmp Update the selected action Actualizaţi acţiunea selectată Update action Actualizaţi acţiunea Inserts the action into the list above Inseraţi acţiunea în lista de mai sus Action list Type Tip Insert action Inseraţi acţiune Captures any output from the action Preia orice rezultat al acţiunii Captures the standard output or error generated by the action and displays it in a dialog box Preia rezultatul standard sau eroarea generată de către acţiune şi o afişează într-o fereastră de dialog Capture output Preluare rezultat Generic Python Windows Mac Unix Enter the action command here Introduceţi comanda aici Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if preceeded by a backslash Introduceţi comanda aici. Aceasta poate fi orice program, script sau comandă care este disponibilă pentru sistemul dvs. Când acţiunea este executată, orice set de caractere care începe cu % şi are numele unui câmp va fi înlocuit cu valoarea acelui câmp. Caracterele speciale % % vor fi înlocuite cu valoarea câmpului selectat. Ghilimelele marchează textul respectiv într-un singur argument pentru program, script sau comandă. Ghilimelele precedate de \ vor fi ignorate Action: Acţiune: Enter the action name here Introduceţi numele acţiunii aici Enter the name of an action here. The name should be unique (qgis will make it unique if necessary). Introduceţi numele acţiunii aici. Numele trebuie să fie unic (qgis îl va face unic, dacă e necesar). Name: Nume: Attribute Actions Action properties Name Nume Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash Action Browse for action Click to browse for an action ... ... Capture Clicking the button will let you select an application to use as the action QgsAttributeDialog (int) (dbl) (txt) Attributes - %1 ... ... QgsAttributeDialogBase Enter Attribute Values Introduceţi valoarile atributului 1 1 Attribute Atribut Value Valoare &OK &OK &Cancel &Renunţă QgsAttributeEditor Select a file ... ... QgsAttributeLoadValues Load values from layer Layer Description Descriere: Value Valoare Select data from attributes in selected layer. View All QgsAttributeSelectionDialog Attribute Atribut Alias Select all Clear QgsAttributeTable Run action Executaţi acţiunea Abort Renunta QgsAttributeTableBase Attribute Table Tabela de atribute &Help &Ajutor Alt+C Alt+C Search for: Căutaţi: in în Search Căutare Adva&nced... Ava&nsat... Alt+N Alt+N &Close &Închidere Remove selection Înlăturaţi selecţia Move selected to top Mutaţi elementele selectate deasupra Ctrl+T Ctrl+T Invert selection Inversaţi selecţia Ctrl+S Ctrl+S Copy selected rows to clipboard (Ctrl+C) Copiaţi liniile selectate (Ctrl+C) Copies the selected rows to the clipboard Copiază liniile selectate Ctrl+C Ctrl+C New column Coloană nouă Ctrl+N Ctrl+N Delete column Ştergeţi coloana Ctrl+X Ctrl+X Start editing Editaţi Stop editin&g Încetaţi editarea Alt+G Alt+G Ctrl+F Ctrl+F Apropiere de Selecţie Ctrl+J Ctrl+J Măsurare suprafaţă QgsAttributeTableDialog Attribute table - %1 Search string parsing error Eroarea la analizarea criteriului de căutare Search results Căutare în rezultate You've supplied an empty search string. Nu aţi introdus criteriul de căutare. Error during search Eroare la căutare Found %d matching features. No matching features found. Nu au fost găsite caracteristici corespunzătoare. Attribute added Attribute Error The attribute could not be added to the layer Deleted attribute The attribute(s) could not be deleted Attribute Table Tabela de atribute Remove selection Înlăturaţi selecţia Move selected to top Mutaţi elementele selectate deasupra Unselect all Move selection to top Ctrl+T Ctrl+T Invert selection Inversaţi selecţia Ctrl+S Copy selected rows to clipboard (Ctrl+C) Copiaţi liniile selectate (Ctrl+C) Copies the selected rows to the clipboard Copiază liniile selectate Ctrl+C Ctrl+C Zoom map to the selected rows (Ctrl-J) Ctrl+J Ctrl+J Măsurare suprafaţă Toggle editing mode New column Coloană nouă Delete column Ştergeţi coloana Open field calculator Look for in în Looks for the given value in the given attribute column &Search Show selected records only Opens the search query builder Advanced search Help Ajutor Delete selected features ... ... Search selected records only QgsAttributeTableDisplay select selectaţi select and bring to top selectaţi şi aduceţi deasupra show only matching arătaţi doar cele potrivite Search string parsing error Eroarea la analizarea criteriului de căutare Search results Căutare în rezultate You've supplied an empty search string. Nu aţi introdus criteriul de căutare. Error during search Eroare la căutare Found %d matching features. No matching features found. Nu au fost găsite caracteristici corespunzătoare. Stop editing Încetaţi editarea Do you want to save the changes? Sunteţi sigur că doriţi să salvati? Error Eroare Could not commit changes Nu se pot salva modificarile efectuate. Attribute table - Tabela de atribute- File Fişier Close Închidere Edit Editare Ctrl+X Ctrl+X Ctrl+C Ctrl+C Delete Ştergere Ctrl+J Ctrl+J Măsurare suprafaţă Found %n matching feature(s). search results QgsAttributeTableModel Attribute changed QgsAttributeTableView Run action Executaţi acţiunea QgsAttributeTypeDialog Select a file Error Eroare Could not open file %1 Error was:%2 Current minimum for this value is %1 and current maximum is %2. Attribute has no integer or real type, therefore range is not usable. Enumeration is not available for this attribute Attribute Edit Dialog Line edit Classification Range Raza Unique values File name Value map Enumeration Immutable Hidden Checkbox Text edit Simple edit box. This is the default editation widget. Displays combo box containing values of attribute used for classification. Allows to set numeric values from a specified range. The edit widget can be either a slider or a spin box. Minimum Maximum Step Slider Editable Local minimum/maximum = 0/0 The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used. Simplifies file selection by adding a file chooser dialog. Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box. Load Data from layer Value Valoare Description Descriere: Remove Selected Load Data from CSV file Combo box with values that can be used within the column's type. Must be supported by the provider. An immutable attribute is read-only - the user is not able to modify the contents. A hidden attribute will be invisible - the user is not able to see it's contents. Representation for checked state Representation for unchecked state A text edit field that accepts multiple lines will be used. QgsAvoidIntersectionsDialogBase Remove intersections of new polygons with layers QgsBookmarks Really Delete? Sunteţi sigur că doriţi să ştergeţi? Are you sure you want to delete the Sunteţi sigur că doriţi să ştergeţi bookmark? bookmark-ul? &Yes &Da &No &Nu Error deleting bookmark Eroare la ştergerea bookmark-ului Failed to delete the Nu s-a reuşit ştergerea bookmark from the database. The database said: bookmark-ului din baza de date. Mesajul bazei de date a fost: &Delete &Zoom to Are you sure you want to delete the %1 bookmark? Failed to delete the %1 bookmark from the database. The database said: %2 QgsBookmarksBase Geospatial Bookmarks Bookmark-uri Geospaţiale Name Nume Project Proiect Extent Extent Id Id Close the dialog Închideţi dialogul Help Ajutor Close Închidere Delete the currently selected bookmark Ştergeţi bookmark-ul selectat Delete Ştergere Zoom to the currently selected bookmark Apropiaţi bookmark-ul selectat Zoom To Apropiaţi QgsCategorizedSymbolRendererV2Widget Error Eroare There are no available color ramps. You can add them in Style Manager. The selected color ramp is not available. Column: Symbol: change Color ramp: Classify Delete Ştergere Delete all Join QgsComposer QGIS - print composer QGIS - setarea print-ului Map 1 Harta 1 Couldn't open Nu a putut fi deschis for read/write pentru citire/scriere Error in Print Eroare la printare Cannot seek Nu poate fi căutat Cannot overwrite BoundingBox Cadrul nu poate fi suprascris Cannot find BoundingBox Cadrul nu poate fi găsit Cannot overwrite translate Translaţia nu poate fi suprascrisă Cannot find translate Translaţia nu poate fi găsită File IO Error Eroare IO la accesarea fişierului Paper does not match Hârtia nu este potrivită The selected paper size does not match the composition size Formatul hârtiei alese nu se potriveşte cu dimensiunile print-ului Big image Imagine mare To create image Pentru a crea imaginea requires circa sunt necesare aprox MB of memory MB de memorie format format Choose a filename to save the map image as Alegeţi un nume sub care să salvaţi imaginea hărţii SVG warning avertisment SVG Don't show this message again Nu mai arătaţi acest mesaj The SVG export function in Qgis has several problems due to bugs and deficiencies in the Qt4 svg code. Of note, text does not appear in the SVG file and there are problems with the map bounding box clipping other items such as the legend or scale bar.If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory. Funcţia de export SVG în Qgis are câteva probleme datorate unor bug-uri şi deficienţe ale codului svg Qt4. De notat că textul nu apare în fişierul SVG şi exită probleme cu cadrull hărţii dacă acesta întretaie alte elemente precum legenda sau scara.Dacă doriţi un fişier de output cu date vectoriale din Qgis, puteţi încerca sa printaţi in PostScript, dacă output-ul SVG nu este satisfăcător. Choose a filename to save the map as Alegeţi un nume sub care să salvaţi harta SVG Format Format SVG QGIS File Fişier Close Închidere Edit Editare Ctrl+X Ctrl+X Ctrl+C Ctrl+C Delete Ştergere View Layout PDF Format Choose a file name to save the map image as Choose a file name to save the map as Composer Project contains WMS layers Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed The SVG export function in Qgis has several problems due to bugs and deficiencies in the %1 format (*.%2 *.%3) Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box. To create image %1 x %2 requires circa %3 MB of memory If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory. save template Save error Error, could not save file Load template Read error Error, could not read file Content of template file is not valid QgsComposerArrowWidget General options Arrow color Start marker svg file End marker svg file QgsComposerArrowWidgetBase Form Arrow Arrow color... Outline width Arrow head width Arrow markers Default marker No marker SVG markers Start marker ... ... End marker QgsComposerBase MainWindow Fereastra principală General General Composition Compunere Item Element Close Închidere Help Ajutor &Open Template ... &Deschide Template... Save Template &As... Salvare Template &Ca... &Print... &Printare... Zoom All Apropiere toate Zoom In Apropiere Zoom Out Depărtare Add new map Adăugare hartă nouă Add new label Adăugare etichetă nouă Add new vect legend Adăugare legendă vect nouă Select/Move item Selectaţi/Mutaţi element Export as image Exportaţi ca imagine Export as SVG Exportaţi în format SVG Add new scalebar Adăugaţi o nouă scară Refresh view Refresh view Add Image Adăugaţi imagine Zoom Full Vedere de ansamblu Add Map Add Label Add Vector Legend Move Item Export as Image... Export as PDF... Export as SVG... Add Scalebar Refresh Actualizează Move Content Move item content Group Grup Group items Ungroup Ungroup items Raise Raise selected items Lower Lower selected items Bring to Front Move selected items to top Send to Back Move selected items to bottom Load From template Save as template Align left Align selected items left Align center Align center horizontal Align right Align selected items right Align top Align selected items to top Align center vertical Align bottom Align selected items bottom &Quit Quit Ctrl+Q Ctrl+Q Iesire din QGIS Add Basic Shape Add arrow Add table Adds attribute table QgsComposerItemWidgetBase Form Color Culoare Frame color... Background color... Opacity Outline width Show frame Frame Cadru Position... QgsComposerLabelBase Label Options Opţiuni etichetă Box Box Font Font QgsComposerLabelWidget General options QgsComposerLabelWidgetBase Label Options Opţiuni etichetă Label Font Font color... Margin (mm) QgsComposerLegend Legend Legendă QgsComposerLegendItemDialogBase Legend item properties Item text QgsComposerLegendWidget Item Options QgsComposerLegendWidgetBase Barscale Options Opţiuni petru afişare scara hărţii General General &Title Title Font... Layer Font... Item Font... Symbol width mm Symbol height Layer space Symbol space Icon label space Box space v ^ X Edit Editare All Title Titlu Remove Ştergeţi Update Legend items QgsComposerManager Remove composer Do you really want to remove the map composer '%1'? Change title Title Titlu QgsComposerManagerBase Composer manager Add Adauga Remove Ştergeţi Rename Show QgsComposerMap Map %1 Harta %1 Extent (calculate scale) Dimensiune (calcul scară) Scale (calculate extent) Scară (calcul dimensiune) Cache Cache Render Afişare Rectangle Dreptunghi Map Hartă Map will be printed here QgsComposerMapBase Map options Opţiuni hartă Map Hartă Set Setare Width Lăţime Height Înălţime Scale Scară 1 : 1 : Set map extent to current extent in QGIS map canvas Setaţi dimensiunea hărţii ca fiind cea actuală din harta QGIS Set Extent Setaţi dimensiune Line width scale Mărimea liniei Width of one unit in millimeters Lăţimea unei unităţi în milimetri Symbol scale Mărimea simbolului Font size scale Mărimea fontului Frame Cadru Preview Previzualizare QgsComposerMapWidget General options Cache Cache Rectangle Dreptunghi Solid Cross Cruce Inside frame Outside frame Horizontal Orizontal Vertical Vertical Horizontal and Vertical Boundary direction Render QgsComposerMapWidgetBase Map options Opţiuni hartă Map Hartă Map Hartă Width Lăţime Height Înălţime Scale Scară Rotation Extents X min Y min Grid Show grid? Grid &type Interval X Offset X Line width Mărimea liniei Annotation position Annotation direction Line color Interval Y Offset Y Cross width X max Y max Set to map canvas extent Lock layers for map item Draw annotation Font... Distance to map frame Coordinate precision Map extent Preview Previzualizare Update preview QgsComposerPicture Warning Atenţie Cannot load picture. Nu se poate încărca imaginea. Pictures ( Imagini ( Choose a file Alegeţi un fişier QgsComposerPictureBase Picture Options Opţiuni Imagine Picture Imagine ... ... Frame Cadru Angle Unghi Width Lăţime Height Înălţime Browse Selectaţi QgsComposerPictureWidget General options Select svg or image file Select new preview directory Map %1 Harta %1 Creating icon for file %1 QgsComposerPictureWidgetBase Picture Options Opţiuni Imagine Picture options Search directories Add... Remove Ştergeţi Preview Previzualizare Options Opţiuni Load ... ... Width Lăţime Height Înălţime Rotation Sync from map QgsComposerScaleBarWidget General options Single Box Double Box Line Ticks Middle Line Ticks Down Line Ticks Up Numeric Map %1 Harta %1 QgsComposerScaleBarWidgetBase Barscale Options Opţiuni petru afişare scara hărţii Scale bar Segment size (map units) Map units per bar unit Right segments Left segments mm Height Line width Label space Box space Number of segments Numar de segmente Style Map Hartă Line width Mărimea liniei Unit label Denumirea unităţii Font... Color... QgsComposerScalebarBase Barscale Options Opţiuni petru afişare scara hărţii Segment size Mărimea Segmentului Number of segments Numar de segmente Map units per scalebar unit Unităti hartă corespunzătoare unei unităti de scară Unit label Denumirea unităţii Map Hartă Font Font (scris) Line width Mărimea liniei QgsComposerShapeWidget General options Ellipse Rectangle Dreptunghi Triangle Select outline color Select fill color QgsComposerShapeWidgetBase Form Shape Shape outline color... Outline width Transparent fill Shape fill Color... Rotation Rotation Rotation QgsComposerTableWidget General options Map %1 Harta %1 Select Font Select grid color QgsComposerTableWidgetBase Form Table Layer Attributes... Show only visible features Composer map Maximum columns Margin Show grid Grid stroke width Grid color Header Font... Content Font... QgsComposerVectorLegend Legend Legendă Layers Layere (Straturi) Group Grup Combine selected layers Combină layerele selectate Cache Cache Render Randare (Producere imagine) Rectangle Dreptunghi QgsComposerVectorLegendBase Vector Legend Options Opţiuni legendă vector Title Titlu Map Hartă Font Font (scris) Box Box (Dimensiuni) Column 1 Coloana 1 Preview Previzualizare Layers Layere (Straturi) Group Grup ID QgsComposition Custom Customizat A5 (148x210 mm) A5 (148x210 mm) A4 (210x297 mm) A4 (210x297 mm) A3 (297x420 mm) A3 (297x420 mm) A2 (420x594 mm) A2 (420x594 mm) A1 (594x841 mm) A1 (594x841 mm) A0 (841x1189 mm) A0 (841x1189 mm) B5 (176 x 250 mm) B5 (176 x 250 mm) B4 (250 x 353 mm) B4 (250 x 353 mm) B3 (353 x 500 mm) B3 (353 x 500 mm) B2 (500 x 707 mm) B2 (500 x 707 mm) B1 (707 x 1000 mm) B1 (707 x 1000 mm) B0 (1000 x 1414 mm) B0 (1000 x 1414 mm) Letter (8.5x11 inches) Letter (8.5x11 inches) Legal (8.5x14 inches) Legal (8.5x14 inches) Portrait Orientare Portret Landscape Orientare Peisaj Out of memory Memorie sistem consumată Qgis is unable to resize the paper size due to insufficient memory. It is best that you avoid using the map composer until you restart qgis. Qgis nu poate redimensiona pagina datorită memorie insuficiente. Restarţi QGIS pentru a putea folosi din nou modulul pentru creare harţi. Label Etichetă (Denumire) Warning Atenţie Cannot load picture. Nu se poate încărca imaginea. QgsCompositionBase Composition Compunere Paper Hârtie (pagină) Size Dimensiuni Units Unităţi Width Lăţime Height Înălţime Orientation Orientare Resolution (dpi) Rezoluţie (dpi) QgsCompositionWidget Landscape Orientare Peisaj Portrait Orientare Portret ANSI A (Letter; 8.5x11 inches) ANSI B (Tabloid; 11x17 inches) ANSI C (17x22 inches) ANSI D (22x34 inches) ANSI E (34x44 inches) Arch A (9x12 inches) Arch B (12x18 inches) Arch C (18x24 inches) Arch D (24x36 inches) Arch E (36x48 inches) Arch E1 (30x42 inches) Custom Customizat A5 (148x210 mm) A5 (148x210 mm) mm inch A4 (210x297 mm) A4 (210x297 mm) A3 (297x420 mm) A3 (297x420 mm) A2 (420x594 mm) A2 (420x594 mm) A1 (594x841 mm) A1 (594x841 mm) A0 (841x1189 mm) A0 (841x1189 mm) B5 (176 x 250 mm) B5 (176 x 250 mm) B4 (250 x 353 mm) B4 (250 x 353 mm) B3 (353 x 500 mm) B3 (353 x 500 mm) B2 (500 x 707 mm) B2 (500 x 707 mm) B1 (707 x 1000 mm) B1 (707 x 1000 mm) B0 (1000 x 1414 mm) B0 (1000 x 1414 mm) Letter (8.5x11 inches) Letter (8.5x11 inches) Legal (8.5x14 inches) Legal (8.5x14 inches) Solid Dots Crosses QgsCompositionWidgetBase Composition Compunere Paper Hârtie (pagină) Orientation Orientare Height Înălţime Width Lăţime Units Unităţi Paper and quality Size Dimensiuni dpi Quality Width Height Spacing X offset Y offset Pen width Grid color Grid style Snapping Snap to grid Print as raster QgsConfigureShortcutsDialog Save shortcuts XML file (*.xml);; All files (*.*) Saving shortcuts Cannot write file %1: %2. Load shortcuts Loading shortcuts Cannot read file %1: %2. Parse error at line %1, column %2: %3 The file is not an shortcuts exchange file. The file contains shortcuts created with different locale, so you can't use it. None Niciunul/Niciuna Set default (%1) Input: Change Schimba Shortcut conflict This shortcut is already assigned to action %1. Reassign? Configure shortcuts Action Shortcut Set none Set default Load... Save... QgsConnectionDialog Test connection Test conexiune Connection to Conectarea la was successfull a fost efectuată Connection failed - Check settings and try again Conexiunea a eşuat - Verificaţi setările General Interface Help: Ajutor general pentru Interfaţă: QgsConnectionDialogBase Create a New PostGIS connection Crează o nouă conexiune PostGIS Connection Information Informaţii conexiune Save Password Salvează parola Test Connect Test conexiune Name Nume Host Adresă (host) Database Baza de date Port Port Username Nume Utilizator (Login) Password Parola Name of the new connection Numele conexiunii noi 5432 5432 Help Ajutor F1 F1 OK Ok Cancel Renunţare QgsContinuousColorDialogBase Continuous color Culoare continuă Maximum value Outline width Minimum value Classification field Draw polygon outline Desenează linia exterioară a polygonului Classification Field: Atribut pentru clasificare: Minimum Value: Valoare Minimă: Outline Width: Dimensiuni linie exterioară: Maximum Value: Valoare Maximă: QgsCoordinateTransform The source spatial reference system (SRS) is not valid. Sistemul de referinta spatial (SRS) nu este valid. The coordinates can not be reprojected. The SRS is: Coordinatele nu pot fi reproiectate. SRS: The destination spatial reference system (SRS) is not valid. Sistemul de referinta spatial (SRS) de destinatie nu este valid. Failed Esuat. transform of transformare a with error: cu eroarea: The source spatial reference system (CRS) is not valid. The destination spatial reference system (CRS) is not valid. inverse transform forward transform %1 of %2 failed with error: %3 The coordinates can not be reprojected. The CRS is: %1 QgsCopyrightLabelPlugin Bottom Left Stanga jos Top Left Stanga sus Top Right Dreapta sus Bottom Right Dreapta jos &Copyright Label &Eticheta Drepturi de Autor Creates a copyright label that is displayed on the map canvas. Creaza o Eticheta Drepturi de Autor pentru a fi afisată in harta &Decorations &Decoratii QgsCopyrightLabelPluginGuiBase Copyright Label Plugin Plugin Eticheta Drepturi de Autor <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">DescriptionEnter your copyright label below. This plugin supports basic html markup tags for formatting the label. For example: Bold text Italics (note: &copy; gives a copyright symbol)</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">DescriereIntroduceti Eticheta Drepturi de Autor. Html markup este permis. exemplu: Bold text Italics (nota: &copy; afiseaza symbolul de copyright)</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">© QGIS 2006</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">© QGIS 2006</body></html> Placement Pozitionare &Enter your copyright label here: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;"> © QGIS 2009</body></html> &Placement Bottom Left Stanga jos Top Left Stanga sus Bottom Right Dreapta jos Top Right Dreapta sus &Orientation &Color Orientation Orientare Horizontal Orizontal Vertical Vertical Enable copyright label Enable Copyright Label Arata Eticheta Drepturi de Autor Help Ajutor Alt+O Alt+O &OK &OK &Cancel &Renunţă Alt+C Alt+C Color Culoare QgsCredentialDialog Enter Credentials Username Nume Utilizator (Login) Password Parola TextLabel Realm QgsCustomProjectionDialog Delete Projection Definition? Sterge definire proiectie Deleting a projection definition is not reversable. Do you want to delete it? Stergerea proiectiei este definitiva. Sunteti sigur ca vreti sa o stergeti? Abort Renunta New Noua QGIS Custom Projection Proiectie customizata This proj4 projection definition is not valid. Please give the projection a name before pressing save. Acesta definire a proiectiei nu este valida. Introduceti un nume pentru aceasta proiectie inainte de a o salva. This proj4 projection definition is not valid. Please add the parameters before pressing save. Acesta definire a proiectiei nu este valida. Introduceti parametri aceastei proiectie inainte de a o salva. This proj4 projection definition is not valid. Please add a proj= clause before pressing save. Acesta definire a proiectiei nu este valida. Adaugati proj= inainte de a o salva. This proj4 ellipsoid definition is not valid. Please add a ellips= clause before pressing save. Acesta definire a proiectiei nu este valida. Introduceti ellips= . This proj4 projection definition is not valid. Please correct before pressing save. Acesta definire a proiectiei nu este valida. Va rugam sa o corectati. This proj4 projection definition is not valid. Acesta definire a proiectiei nu este valida. Northing and Easthing must be in decimal form. Coordonatele pe Nord si Est trebuie sa fie in format decimal. Internal Error (source projection invalid?) eroare interna (este proiectia sursa valida?) Please give the projection a name before pressing save. Please add the parameters before pressing save. Please add a proj= clause before pressing save. This proj4 ellipsoid definition is not valid. Please add a ellips= clause before pressing save. COMMENTED OUT Acesta definire a proiectiei nu este valida. Introduceti ellips= . Please correct before pressing save. QgsCustomProjectionDialogBase Custom Projection Definition Definitie proiectie customizata Define Defineste <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">You can define your own custom projection here. The definition must conform to the proj4 format for specifying a Spatial Reference System.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">aici se poate defini proiectia customizata. formatul trebuie sa fie conform cu proj4.</body></html> Parameters: Parametri: |< |< < < 1 of 1 1 din 1 > > >| >| New Noua Save Salvare Delete Ştergere Close Închidere Name: Nume: Test Test Transform from WGS84 to the chosen projection Transformare din WGS84 catre poiectia aleasa <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Use the text boxes below to test the projection definition you are creating. Enter a coordinate where both the lat/long and the projected result are known (for example by reading off a map). Then press the calculate button to see if the projection definition you are creating is accurate.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Utilizati casutele de mai jos pentru a testa proiectia definita de dvs. Introduceti coordonatele de intrare si rezultatul acolo unde se cunoaste (de ex. citind de pe o harta). Apoi apasati butonul de calculare ca sa vedeti daca transformarea este corecta.</body></html> Projected Corrdinate System Sistem de Coordonate Proiectate Geographic / WGS84 Geografic / WGS84 East: Coordonate estice North: Coordonate pe nord: Calculate Calculează Name Nume Parameters * S X North East Custom Coordinate Reference System Definition You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS. Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate. Destination CRS QgsDashSpaceDialogBase Dash space pattern Dash Space QgsDbSourceSelect Type Tip Name Nume Sql Sql Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea Yes Da No Nu QgsDbSourceSelectBase Add PostGIS Table(s) Adauga tabela PostGIS Help Ajutor F1 F1 Add Adauga Close Închidere Encoding: Codificare Tables: Tabele: Type Tip Name Nume Sql Sql PostgreSQL Connections Conexiuni PostGIS Delete Ştergere Edit Editare New Noua Connect Conectare QgsDbTableModel Schema Table Type Tip Geometry column Primary key column Sql Sql Point Punct Multipoint Line Linie Multiline Polygon Poligon Multipolygon QgsDelAttrDialogBase Delete Attributes Sterge Atribute OK Ok Cancel Renuţare QgsDelimitedTextPlugin &Add Delimited Text Layer &Delimited text DelimitedTextLayer Add a delimited text file as a map layer. The file must have a header row containing the field names. X and Y fields are required and must contain coordinates in decimal units. QgsDelimitedTextPluginGui No layer name Please enter a layer name before adding the layer to the map No delimiter Please specify a delimiter prior to parsing the file Choose a delimited text file to open Parse Description Descriere: QgsDelimitedTextPluginGuiBase Create a Layer from a Delimited Text File &Help &Ajutor Alt+A Alt+A Close the dialog Închideţi dialogul &Close &Închidere Alt+C Alt+C X field X Name of the field containing x values Name of the field containing x values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file. Y field Y Name of the field containing y values Name of the field containing y values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file. Sample text <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:12pt;font-family:Arial"> Description Select a delimited text file containing x and y coordinates that you would like to use as a point layer and this plugin will do the job for you! Use the layer name box to specify the legend name for the new layer. Use the delimiter box to specify what delimeter is used in your file (e.g. space, commar or tab). Note this box accepts regular expressions so use \t for tab and so on. After choosing a delimiter, press the parse button an select the columns containing the x and y values for the layer. </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:12pt;font-family:Arial">DescriptionSelectati va rog un text continand coordonate x si y pe care doriti sa le transformati intr-un strat tip punct.utilizati casuta de nume pentru a specifica numele stratului ce va apare in legenda. utilizati casuta de delimitare pentru a specifica caracterele ce servesc pentru delimitarea coordonatelor. Dupa accea apsati butonul pentru a selecta coloanele corespunzatoare.</body></html> Delimited text file Full path to the delimited text file Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file. Browse to find the delimited text file to be processed Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the Delimiter box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file. Utilizati butonul pentru a selecta locatia fisierului. mai inainte alegeti un tip de delimitare din casuta tip delimitare. ... ... Layer name Name to display in the map legend Name displayed in the map legend Delimiter Delimiter string Delimiter to use when splitting fields in the text file. The delimiter can be more than one character. Delimiter to use when splitting fields in the delimited text file. The delimiter can be 1 or more characters in length. Geometry The delimiter is taken as is Type Tip Plain characters The delimiter is a regular expression Regular expression QgsDelimitedTextProvider Note: the following lines were not loaded because Qgis was unable to determine values for the x and y coordinates: Error Eroare QgsDetailedItemWidgetBase Form Heading Label Detail label QgsDiagramDialog Pie chart Bar chart Proportional SVG symbols linearly scaling QgsDiagramDialogBase Dialog Display diagrams Diagram type Classification attribute Classification type QgsDisplayAngle %1 degrees %1 radians %1 gon QgsDisplayAngleBase Angle Unghi QgsDlgPgBufferBase Buffer features Parameters Geometry column: Add the buffered layer to the map? Spatial reference ID: Schema: Unique field to use as feature id: Table name for the buffered layer: Create unique object id public Buffer distance in map units: <h2>Buffer the features in layer: </h2> <h2>Faceti un Buffer al obiectelor din stratul: </h2> &Help &Ajutor F1 F1 &OK &OK &Cancel &Renunţă QgsEditReservedWordsBase Edit Reserved Words Editeaza Cuvinte rezervate <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Double click the Column Name column to change the name of the column.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Faceti dublu click pentru a schimba numele coloanei.</body></html> Status Starea actuala Column Name Nume coloana Index Index &Help &Ajutor F1 F1 &OK &OK &Cancel &Renunţă <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This shapefile contains reserved words. These may affect the import into PostgreSQL. Edit the column names so none of the reserved words listed at the right are used (click on a Column Name entry to edit). You may also change any other column name if desired.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Acest fişier shape contine cuvinte rezervate. Editati numele coloanelor pentru a evita folosirea unor astefel de cuvinte care poate afecta importul in PostGIS</body></html> Reserved Words Cuvinte rezervate QgsEditReservedWordsDialog Status Starea actuala Column Name Nume coloana Index Index QgsEncodingFileDialog Encoding: Codificare QgsFieldCalculator (not supported by provider) Syntax error Provider error Could not add the new field to the provider. Error Eroare An error occured while evaluating the calculation string. QgsFieldCalculatorBase Field calculator Update existing field Only update selected features New field Output field name Output field type Output field width Output field precision Fields Values Sample All Operators + + Adaugă toate straturile tematice în Zona de Previzualizare * sqrt sin tan acos ( - - Elimină toate straturile tematice din Zona de Previzualizare / / Vectorizare Linie ^ cos asin atan ) to real to int to string length area Field calculator expression QgsFillStyleWidgetBase Form1 Form1 Fill Style Stilul de umplere col col Colour: Culoare: PolyStyleWidget PolyStyleWidget QgsGCPListWidget Recenter Remove Ştergeţi QgsGPSDeviceDialog New device %1 Aparat nou %1 Are you sure? Sunteti singur? Are you sure that you want to delete this device? Sunteti sigur ca doriti sa stergeti acest aparat? QgsGPSDeviceDialogBase GPS Device Editor This is the name of the device as it will appear in the lists Commands The command that is used to download routes from the device The command that is used to upload waypoints to the device Devices Delete Ştergere New Noua Update Track download Route upload Waypoint download Route download Track upload The command that is used to download tracks from the device The command that is used to upload routes to the device The command that is used to download waypoints from the device The command that is used to upload tracks to the device Waypoint upload <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:%babel - the path to GPSBabel %in - the GPX filename when uploading or the port when downloading %out - the port when uploading or the GPX filename when downloading</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:%babel - the path to GPSBabel %in - the GPX filename when uploading or the port when downloading %out - the port when uploading or the GPX filename when downloading</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">In comenzile de download si upload pot exista cuvinte speciale ca re vor fi inlocuite de QGIS. Acestea sunt:%babel - calea catre GPSBabel %in - nume fisier GPX %out - port</body></html> Close Închidere Device name QgsGPSInformationWidget Connecting... Timed out! Connected! Disconnect Connect Conectare /gps No path to the GPS port is specified. Please enter a path then try again. Disconnected... Not a vector layer The current layer is not a vector layer 2.5D shape type not supported Adding features to 2.5D shapetypes is not supported yet. Please select a different editable, non 2.5D layer and try again. Multipart shape type not supported Adding features to multipart shapetypes is not supported yet. Please select a different editable, non 2.5D layer and try again. Layer cannot be added to Stratul nu poate fi adaugat la The data provider for this layer does not support the addition of features. Furnizorul de date corespunzator acestui layer nu suporta adaugarea de obiecte. Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Not enough vertices Cannot close a line feature until it has at least two vertices. Cannot close a polygon feature until it has at least three vertices. Feature added Error Eroare The feature could not be added because removing the polygon intersections would change the geometry type An error was reported during intersection removal Cannot add feature. Unknown WKB type. Choose a different layer and try again. QgsGPSInformationWidgetBase Form ... ... Connect Conectare Latitude Longitude Elevation Vertical Accuracy Horizonal Accuracy Add vertex Add feature Reset current feature GPS device port Autodetect Use path / port below Path to serial device GPS cursor size Small Large GPS digitizing Auto-add vertices GPS map recenter when leaving extents never always Track Color Culoare width QgsGPSPlugin &Gps Tools &Create new GPX layer Creates a new GPX layer and displays it on the map canvas &Gps Save new GPX file as... GPS eXchange file (*.gpx) Could not create file Unable to create a GPX file with the given name. Try again with another name or in another directory. GPX Loader Could not start process Could not start GPSBabel! Importing data... Cancel Could not import data from %1! Error importing data Not supported Downloading data... Could not download data from GPS! Error downloading data Uploading data... Error while uploading data to GPS! Error uploading data Could not convert data from %1! Error converting data Unable to read the selected file. Please reselect a valid file. This device does not support downloading of %1. This device does not support uploading of %1. QgsGPSPluginGui Choose a filename to save under Alegeţi un nume de fişier pentru salvare GPS eXchange format (*.gpx) formatul GPS eXchange (*.gpx) Select GPX file Selectati fişierul GPX Select file and format to import alegeti fisierul si formatul pentru import Waypoints Routes Tracks Choose a file name to save under QgsGPSPluginGuiBase GPS Tools &Help &Ajutor Alt+C Alt+C &OK &OK Alt+O Alt+O &Cancel &Renunţă Load GPX file <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> GPX is the <a href="http://www.topografix.com/gpx.asp">GPS eXchange file format</a>, which is used to store information about waypoints, routes, and tracks. Select a GPX file and then select the feature types that you want to load.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">GPX este <a href="http://www.topografix.com/gpx.asp">formatul GPS eXchange</a>, utilizat pentru transferul de waypoints, routes, si tracks.Selectati un fisier GPX file si apoi selectati tipul obiectelor pe care doriti sa le incarcati.</body></html> ... ... File Fişier Feature types Waypoints Routes Tracks Import other file <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> QGIS can only load GPX files by itself, but many other formats can be converted to GPX using GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>). This requires that you have GPSBabel installed where QGIS can find it. Select a GPS file format and the file that you want to import, the feature type that you want to use, a GPX filename that you want to save the converted file as, and a name for the new layer. All file formats can not store waypoints, routes, and tracks, so some feature types may be disabled for some file formats.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">QGIS can only load GPX files by itself, but many other formats can be converted to GPX using GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>). This requires that you have GPSBabel installed where QGIS can find it.Select a GPS file format and the file that you want to import, the feature type that you want to use, a GPX filename that you want to save the converted file as, and a name for the new layer. All file formats can not store waypoints, routes, and tracks, so some feature types may be disabled for some file formats.</body></html> Download from GPS <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> This tool will help you download data from a GPS device. Choose your GPS device, the port it is connected to, the feature type you want to download, a name for your new layer, and the GPX file where you want to store the data. If your device isn't listed, or if you want to change some settings, you can also edit the devices. This tool uses the program GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>) to transfer the data. If you don't have GPSBabel installed where QGIS can find it, this tool will not work.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">This tool will help you download data from a GPS device. Choose your GPS device, the port it is connected to, the feature type you want to download, a name for your new layer, and the GPX file where you want to store the data. If your device isn't listed, or if you want to change some settings, you can also edit the devices.This tool uses the program GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>) to transfer the data. If you don't have GPSBabel installed where QGIS can find it, this tool will not work.</body></html> Edit devices Upload to GPS <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> This tool will help you upload data from a GPX layer to a GPS device. Choose the layer you want to upload, the device you want to upload it to, and the port your device is connected to. If your device isn't listed, or if you want to change some settings, you can also edit the devices. This tool uses the program GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>) to transfer the data. If you don't have GPSBabel installed where QGIS can find it, this tool will not work.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">This tool will help you upload data from a GPX layer to a GPS device. Choose the layer you want to upload, the device you want to upload it to, and the port your device is connected to. If your device isn't listed, or if you want to change some settings, you can also edit the devices.This tool uses the program GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>) to transfer the data. If you don't have GPSBabel installed where QGIS can find it, this tool will not work.</body></html> Browse... File to import Feature type Layer name GPX output file Save As... (Note: Selecting correct file type in browser dialog important!) GPS device Port Port Output file Data layer GPX Conversions GPX input file Conversion Edit devices... Refresh Actualizează QgsGPXProvider Bad URI - you need to specify the feature type. GPS eXchange file Digitized in QGIS QgsGenericProjectionSelector This layer appears to have no projection specification. By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below. Define this layer's coordinate reference system: QgsGenericProjectionSelectorBase Coordinate Reference System Selector QgsGeomTypeDialog Name Nume Type Tip QgsGeomTypeDialogBase New Vector Layer Crează un nou layer tip Vector Help Ajutor OK Ok Cancel Renuţare File Format: Format fişier: Remove Ştergeţi Attributes: Atribute Add Adauga Type Tip Point Punct Line Linie Polygon Poligon Column 1 Coloana 1 Attributes Atribute Name Nume ... ... Width Lăţime Precision Precizie QgsGeorefConfigDialogBase Configure Georeferencer Point tip Show IDs Show coords QgsGeorefDescriptionDialogBase Description georeferencer <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;"> </body></html> QgsGeorefPlugin &About &Georeferencer &Ortorectificator QgsGeorefPluginGui All other files (*) Open raster %1 is not a supported raster data source Unsupported Data Source Sursa de Date nu este suportata de QGIS Raster loaded: %1 Georeferencer - %1 Transform: Info GDAL scripting is not supported for %1 transformation Load GCP points No GCP points to save Save GCP points Please load raster to be georeferenced Help Ajutor Panels Toolbars Coordinate: Current map coordinate Current transform parametrisation Enable to open GCP points file %1 Save GCPs Save GCP points? Failed to get linear transform parameters World file exists The selected file already seems to have a world file! Do you want to replace it with the new world file? Failed to compute GCP transform: Transform is not solvable Error Eroare Could not write to Copy in clipboard %1 GDAL script Please set transformation type Please set output raster name %1 requires at least %2 GCPs. Please define more Linear Helmert Polynomial 1 Polynomial 2 Polynomial 3 Thin plate spline (TPS) Not set near bilinear cubic cubicspline lanczons QgsGeorefPluginGuiBase <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">DescriptionThis plugin can generate world files for rasters. You select points on the raster and give their world coordinates, and the plugin will compute the world file parameters. The more coordinates you can provide the better the result will be.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">DescriptionThis plugin can generate world files for rasters. You select points on the raster and give their world coordinates, and the plugin will compute the world file parameters. The more coordinates you can provide the better the result will be.</body></html> Close Închidere ... ... Georeferencer File Fişier View Edit Editare Settings GCP table Open raster Ctrl+O Ctrl+O Deschide Proiect Zoom In Apropiere Ctrl++ Ctrl++ Apropiere Zoom Out Depărtare Ctrl+- Ctrl+- Depărtare Zoom to Layer Focusare pe Layer Ctrl+Shift+F Pan Transformation settings Add point Ctrl+A Ctrl+A Salvare Proiect sub un nume nou Delete point Ctrl+D Ctrl+D Îndepărtează Layer Quit Start georeferencing Ctrl+G Generate GDAL script Ctrl+C Ctrl+C Link Georeferencer to QGis Link QGis to Georeferencer Save GCP points as... Ctrl+S Load GCP points Ctrl+L Configure Georeferencer Ctrl+P Ctrl+P Imprimare Raster properties Move GCP point Zoom Next Zoom Last Înapoi la ultimul nivel de zoom QgsGraduatedSymbolDialog Equal Interval Quantiles Empty QgsGraduatedSymbolDialogBase graduated Symbol Classification Field: Atribut pentru clasificare: Mode: Mod: Delete class Classify Classification field Mode Number of classes QgsGraduatedSymbolRendererV2Widget Error Eroare There are no available color ramps. You can add them in Style Manager. The selected color ramp is not available. Column: Symbol: change Classes: Color ramp: Mode: Mod: Equal Interval Quantile Classify Add class Delete class QgsGrassAttributes Warning Atenţie Column Value Valoare Type Tip Field Atribut ERROR OK Layer QgsGrassAttributesBase GRASS Attributes Tab 1 result Update database record Update Add new category using settings in GRASS Edit toolbox New Noua Delete selected category Delete Ştergere QgsGrassBrowser Tools Add selected map to canvas Copy selected map Rename selected map Delete selected map Set current region to selected map Refresh Actualizează New name for layer "%1" Warning Atenţie Question Are you sure you want to delete %n selected layer(s)? number of layers to delete Cannot write new region New name Cannot copy map %1@%2 command: %1 %2 %3 %4 Cannot rename map %1 Cannot delete map %1 QgsGrassEdit Warning Atenţie You are not owner of the mapset, cannot open the vector for editing. Cannot open vector for update. Edit tools New point Punct nou New line New boundary New centroid Centroid nou Move vertex Add vertex Delete vertex Sterge Vertex Move element Split line Delete element Edit attributes Close Închidere Info The table was created Tool not yet implemented. Orphan record was left in attribute table. Delete the record? Cannot delete orphan record: Background Highlight Dynamic Point Punct Line Linie Boundary (no area) Boundary (1 area) Boundary (2 areas) Centroid (in area) Centroid (outside area) Centroid (duplicate in area) Node (1 line) Node (2 lines) Color Column title Culoare Type Column title Tip Index Column title Index Type Tip Length Lungime Next not used Manual entry No category Cannot check orphan record: %1 Cannot describe table for field %1 Left: %1 Middle: %1 Right: %1 QgsGrassEditAddVertex Select line segment Selectează segment New vertex position Poziţie vertex nouă Release Lasă Liber QgsGrassEditAttributes Select element Selectează element QgsGrassEditBase GRASS Edit Category Mode Settings Snapping in screen pixels Symbology Simbolizare Column 1 Coloana 1 Line width Mărimea liniei Marker size Table Add Column Create / Alter Table Layer Disp Color Culoare Type Tip Index Index Column Length Lungime QgsGrassEditDeleteLine Select element Selectează element Delete selected / select next Stergere este selectat Release selected Lăsare liber este selectat QgsGrassEditDeleteVertex Select vertex Selectează vertex Delete vertex Sterge Vertex Release vertex Lasă vertexul liber QgsGrassEditMoveLine Select element Selectează element New location Locaţie nouă Release selected Lăsare liber este selectat QgsGrassEditMoveVertex Select vertex Selectează vertex Select new position Selectează poziţie nouă QgsGrassEditNewLine New vertex Vertex nou New point Punct nou Undo last point Înapoi la starea anterioară Close line Închide linia QgsGrassEditNewPoint New centroid Centroid nou New point Punct nou QgsGrassEditSplitLine Select position on line Selectează poziţia pe linie Split the line Împarte linia Release the line Lăsare liberă a liniei Select point on line Selectează punct pe linie QgsGrassElementDialog Cancel Ok Ok Enter a name! This is name of the source! Exists! Overwrite QgsGrassMapcalc Mapcalc tools Add map Add constant value Add operator or function Add connection Select item Delete selected item Open Save Salvare Save as Addition Subtraction Multiplication Division Modulus Exponentiation Equal Not equal Greater than Greater than or equal Less than Less than or equal And Or Absolute value of x Inverse tangent of x (result is in degrees) Inverse tangent of y/x (result is in degrees) Current column of moving window (starts with 1) Cosine of x (x is in degrees) Convert x to double-precision floating point Current east-west resolution Exponential function of x x to the power y Convert x to single-precision floating point Decision: 1 if x not zero, 0 otherwise Decision: a if x not zero, 0 otherwise Decision: a if x not zero, b otherwise Decision: a if x > 0, b if x is zero, c if x < 0 Convert x to integer [ truncates ] Check if x = NULL Natural log of x Log of x base b Largest value Median value Smallest value Mode value 1 if x is zero, 0 otherwise Current north-south resolution NULL value Random value between a and b Round x to nearest integer Current row of moving window (Starts with 1) Sine of x (x is in degrees) sin(x) Square root of x sqrt(x) Tangent of x (x is in degrees) tan(x) Current x-coordinate of moving window Current y-coordinate of moving window Warning Atenţie Cannot get current region No GRASS raster maps currently in QGIS Cannot create 'mapcalc' directory in current mapset. New mapcalc Enter new mapcalc name: Enter vector name Save mapcalc File name empty Cannot open mapcalc file column coloana Output Rezultat Cannot check region of map %1 Cannot get region of map %1 The file already exists. Overwrite? The mapcalc schema (%1) not found. Cannot open mapcalc schema (%1) Cannot read mapcalc schema (%1): %1 at line %2 column %3 QgsGrassMapcalcBase MainWindow Fereastra Principală Output Rezultat QgsGrassModule Run Rulează Stop Opreste Warning Atenţie column coloana Cannot get input region Use Input Region Successfully finished Finished with error Module crashed or killed Please ensure you have the GRASS documentation installed. Module: %1 The module file (%1) not found. Cannot open module file (%1) Cannot read module file (%1) %1 at line %2 column %3 Module %1 not found Cannot find man page %1 Not available, description not found (%1) Not available, cannot open description (%1) Not available, incorrect description (%1) Input %1 outside current region! Output %1 exists! Overwrite? Cannot find module %1 Cannot start module: %1 QgsGrassModuleBase GRASS Module Options Opţiuni Output Rezultat Manual Run Rulează View output Close Închidere TextLabel QgsGrassModuleField Attribute field Warning Atenţie 'layer' attribute in field tag with key= %1 is missing. QgsGrassModuleFile File Fişier %1: missing value %1: directory does not exist QgsGrassModuleGdalInput Warning Atenţie PostGIS driver in OGR does not support schemas! Only the table name will be used. It can result in wrong input if more tables of the same name are present in the database. Cannot find layeroption %1 OGR/PostGIS/GDAL Input Cannot find whereoption %1 Select a layer %1: no input QgsGrassModuleInput Warning Atenţie Use region of this map Cannot find typeoption %1 Cannot find values for typeoption %1 Cannot find layeroption %1 GRASS element %1 not supported Select a layer %1: no input Input QgsGrassModuleOption %1: missing value QgsGrassModuleSelection Selected categories QgsGrassModuleStandardOptions Item with key %1 not found << Hide advanced options Show advanced options >> Warning Atenţie column coloana Cannot get current region Cannot find module %1 Cannot start module %1 command: %1 %2 %3 %4 Cannot read module description (%1): %1 at line %2 column %3 Cannot find key %1 Item with id %1 not found Cannot check region of map %1 Cannot set region of map %1 QgsGrassNewMapset Database Baza de date Location 2 User's mapset System mapset Location 1 Enter path to GRASS database The directory doesn't exist! Enter location name! The location exists! Selected projection is not supported by GRASS! Warning Atenţie Cannot create projection. Cannot reproject previously set region, default region set. North must be greater than south East must be greater than west column coloana Cannot reproject selected region. Cannot reproject region Enter mapset name. The mapset already exists Database: Location: Mapset: Create location Create mapset Cannot open DEFAULT_WIND Cannot open WIND New mapset New mapset successfully created and set as current working mapset. Cannot create new mapset directory Cannot create QgsCoordinateReferenceSystem No writable locations, the database is not writable! Regions file (%1) not found. Cannot open locations file (%1) Cannot read locations file (%1): %1 at line %2 column %3 Cannot create new location: %1 New mapset successfully created, but cannot be opened: %1 QgsGrassNewMapsetBase Column 1 Coloana 1 Example directory tree: <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">GRASS data are stored in tree directory structure.The GRASS database is the top-level directory in this tree structure.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">GRASS data are stored in tree directory structure.The GRASS database is the top-level directory in this tree structure.</body></html> Database Error Database: ... ... Select existing directory or create a new one: Location Select location Create new location Location Error <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS location is a collection of maps for a particular territory or project.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS location is a collection of maps for a particular territory or project.</body></html> Projection Error Coordinate system Projection Not defined <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</body></html> Set current QGIS extent Set Setare Region Error S W W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) E N N Crează un nou layer tip Vector New mapset: Mapset Error Existing masets seturi harta existente <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</body></html> Location: Mapset: New Mapset GRASS Database Tree Comment <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</body></html> Browse... GRASS Location <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> The GRASS location is a collection of maps for a particular territory or project.</body></html> Default GRASS Region <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</body></html> Mapset Owner <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</body></html> Create New Mapset QgsGrassPlugin Open mapset New mapset Close mapset Add GRASS vector layer Add GRASS raster layer Open GRASS tools Display Current Grass Region Edit Current Grass Region Edit Grass Vector layer Adds a GRASS vector layer to the map canvas Adds a GRASS raster layer to the map canvas Displays the current GRASS region as a rectangle on the map canvas Edit the current GRASS region Edit the currently selected GRASS vector layer. &GRASS GRASS GrassVector 0.1 0.1 GRASS layer Create new Grass Vector Warning Atenţie Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module). Cannot open vector %1 in mapset %2 GRASS Edit is already running. New vector name New vector created but cannot be opened by data provider. Cannot start editing. GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region. Cannot open GRASS vector: %1 Cannot create new vector: %1 Cannot open vector for update. Cannot read current region: %1 Cannot open the mapset. %1 Cannot close mapset. %1 Cannot close current mapset. %1 Cannot open GRASS mapset. %1 QgsGrassProvider GRASS vector map %1 does not have topology. Build topology? QgsGrassRegion Warning Atenţie GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region. Cannot write region Cannot read current region: %1 QgsGrassRegionBase GRASS Region Settings N N Crează un nou layer tip Vector W W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) E S N-S Res Rows Cols E-W Res Color Culoare Width Lăţime OK Cancel QgsGrassSelect Select GRASS Vector Layer Select GRASS Raster Layer Select GRASS mapcalc schema Select GRASS Mapset Warning Atenţie Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module). Cannot open vector %1 in mapset %2 Choose existing GISDBASE Wrong GISDBASE, no locations available. Wrong GISDBASE Select a map. No map No layer No layers available in this map QgsGrassSelectBase Add GRASS Layer Gisdbase Location Mapset Select or type map name (wildcards '*' and '?' accepted for rasters) Map name Layer Browse Selectaţi Cancel OK QgsGrassShell Close Închidere Ctrl+Shift+V Ctrl+Shift+C Warning Atenţie Cannot rename the lock file %1 QgsGrassShellBase GRASS Shell GRASS Shell Close Închidere QgsGrassTools Browser GRASS Tools Warning Atenţie GRASS Shell is not compiled. column coloana GRASS Tools: %1/%2 The config file (%1) not found. Cannot open config file (%1). Cannot read config file (%1): %1 at line %2 column %3 Cannot start command shell (%1) QgsGrassToolsBase Grass Tools Modules Tree 1 1 Modules List QgsGridMakerPlugin &Graticule Creator &Creator Caroiaj Creates a graticule (grid) and stores the result as a shapefile &Crează un Caroiaj (grid) si il salveaza ca shapefile &Graticules Caroia&je QgsGridMakerPluginGui Choose a filename to save under Alegeţi un nume de fişier pentru salvare QgsGridMakerPluginGuiBase QGIS Plugin Template Matriţă pentru QGIS Plugin <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This plugin will help you to build a graticule shapefile that you can use as an overlay within your qgis map viewer.Please enter all units in decimal degrees</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This plugin will help you to build a graticule shapefile that you can use as an overlay within your qgis map viewer.Please enter all units in decimal degrees</body></html> Type Tip Point Punct Line Linie Polygon Poligon ... ... &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C QgsHelpViewer This help file is not available in your language %1. If you would like to translate it, please contact the QGIS development team. Quantum GIS Help Error Eroare The QGIS help database is not installed This help file does not exist for your language:%1If you would like to create it, contact the QGIS development team Quantum GIS Help - %1 Failed to get the help text from the database: %1 QgsHelpViewerBase QGIS Help &Close &Închidere Alt+C Alt+C &Home Alt+H &Forward Alt+F &Back Alt+B about:blank QgsHttpTransaction WMS Server responded unexpectedly with HTTP Status Code %1 (%2) HTTP response completed, however there was an error: %1 HTTP transaction completed, however there was an error: %1 Network timed out after %1 seconds of inactivity. This may be a problem in your network connection or at the WMS server. Received %1 of %2 bytes Received %1 bytes (total unknown) Not connected Looking up '%1' Connecting to '%1' Sending request '%1' Receiving reply Response is complete Closing down connection Network timed out after %n second(s) of inactivity. This may be a problem in your network connection or at the WMS server. inactivity timeout QgsIDWInterpolatorDialogBase Dialog Distance coefficient P QgsIdentifyResults Identify Results Feature Value Valoare Layer (Actions) Edit feature form View feature form Zoom to feature Copy attribute value Copy feature attributes Expand all Collapse all Run action Executaţi acţiunea Attribute changed Run actions (Derived) Clear results Clear highlights Highlight all Highlight layer QgsIdentifyResultsBase Identify Results Help Ajutor F1 F1 Close Închidere QgsImageWarper Progress indication QgsInterpolationDialog Triangular interpolation (TIN) Inverse Distance Weighting (IDW) No input data for interpolation Please add one or more input layers Output file name invalid Please enter a valid output file name Break lines Structure lines Points Save interpolated raster as... QgsInterpolationDialogBase Output Rezultat ... ... Interpolation plugin Input Vector layers Interpolation attribute Use z-Coordinate for interpolation Add Adauga Remove Ştergeţi Vector layer Attribute Atribut Type Tip Interpolation method Number of columns Number of rows Cellsize X Cellsize Y X min X max Y min Y max Set to current extent Output file QgsInterpolationPlugin &Interpolation QgsItemPositionDialogBase Set item position Item reference point Coordinates x y Set Position Close Închidere QgsLUDialogBase Enter class bounds Lower value - - Elimină toate straturile tematice din Zona de Previzualizare Upper value QgsLabelDialog Auto QgsLabelDialogBase Form1 Form1 Transparency: Transparenta: Font % Placement Pozitionare Basic label options Font size Below Right Label Properties Right Below Over Above Left Below Left Above Right Above Left Size: Preview: QGIS Rocks! Field containing label In points In map units Transparency Offset X offset Y offset Default label Advanced Data defined buffer Data defined position Color Culoare Angle (deg) Buffer size X Offset (pts) Y Offset (pts) Buffer labels Data defined placement Data defined properties &Font family &Bold &Italic &Underline &Size Size units Strikeout X Coordinate Y Coordinate Multiline labels? General General Use scale dependent rendering Utilizeaza rasdare in functie de scara Maximum Minimum Minimum scale at which this layer will be displayed. Scara minima la care acest strat va fi afisat. Maximum scale at which this layer will be displayed. Scara maxima la care acest strat va fi afisat. ° &Color QgsLayerProjectionSelectorBase <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Define this layer's projection:This layer appears to have no projection specification. By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Define this layer's projection:This layer appears to have no projection specification. By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.</body></html> QgsLegend group grup &Properties Caracteristici &Zoom to layer extent &Zoomare la dimensiunile stratului &Add to overview Adaugă în Zona de Previzualizare &Remove from overview Elimină din Zona de Previzualizare &Remove Ştergeţi &Make to toplevel item Elementul cel mai de sus &Allow editing Editaţi &Save as shapefile... Salvare ca shapefile... Re&name Redenumire &Add group &Adaugare Grup &Expand all Expansiune &Collapse all Restrangere Show file groups Arata grupurile de fisiere Stop editing Încetaţi editarea Do you want to save the changes to layer %1? &Open attribute table &Afiseaza Tabela de atribute Allow Editing Editaţi Save as shapefile... Salvare ca shapefile... No Layer Selected Nu există nici un layer selectat To open an attribute table, you must select a vector layer in the legend QgsLegendLayer &Zoom to layer extent &Zoomare la dimensiunile stratului &Zoom to best scale (100%) &Show in overview &Remove Ştergeţi &Open attribute table &Afiseaza Tabela de atribute Save as shapefile... Salvare ca shapefile... Save selection as shapefile... &Properties Caracteristici Save layer as... Select the coordinate reference system for the saved shapefile. The data points will be transformed from the layer coordinate reference system. Saving done Export to Shapefile has been completed Save error Error Eroare QgsLegendLayerFile Attribute table - Tabela de atribute- Start editing failed Nu se poate incepe editarea Provider cannot be opened for editing Furnizorul de date nu poate fi accesat pentru editare. Stop editing Încetaţi editarea Do you want to save the changes? Sunteţi sigur că doriţi să salvati? &Yes &Da &No &Nu Error Eroare Could not commit changes Nu se pot salva modificarile efectuate. Problems during roll back Probleme la aducerea in starea anterioara (roll back) &Zoom to layer extent &Zoomare la dimensiunile stratului &Remove Ştergeţi &Open attribute table &Afiseaza Tabela de atribute Save as shapefile... Salvare ca shapefile... &Properties Caracteristici QgsLineStyleDialogBase Ok Ok QgsLineStyleWidgetBase Form2 Form2 Colour: Culoare: col col QgsLinearlyScalingDialog Millimeter Map units QgsLinearlyScalingDialogBase Form Scale linearly between 0 and the following attribute value / diagram size: Find maximum value Size Dimensiuni Size unit QgsManageConnectionsDialog Load from file Load Save Salvare Save connections XML files (*.xml *.XML) Load connections XML files (*.xml *XML) Saving connections Cannot write file %1: %2. Loading connections Cannot read file %1: %2. Parse error at line %1, column %2: %3 The file is not an WMS connections exchange file. The file is not an PostGIS connections exchange file. Connection with name %1 already exists. Overwrite? QgsManageConnectionsDialogBase Manage connections Save to file Browse Selectaţi QgsMapCanvas because deoarece Could not draw %1 because: %2 COMMENTED OUT Could not draw %1 because: %2 QgsMapCoordsDialog From map canvas QgsMapCoordsDialogBase Enter map coordinates Introduceţi coordonatele hărţii Enter X and Y coordinates (DMS (dd mm ss.ss), DD (dd.dd) or projected coordinates (mmmm.mm)) which correspond with the selected point on the image. Alternatively, click the button with icon of a pencil and then click a corresponding point on map canvas of QGIS to fill in coordinates of that point. X: X: Y: Y: QgsMapLayer &Remove Ştergeţi &Properties Caracteristici %1 at line %2 column %3 User database could not be opened. The style table could not be created. The style %1 was saved to database The style %1 was updated in the database. The style %1 could not be updated in the database. The style %1 could not be inserted into database. style not found in database Loading style file %1 failed because: %2 Could not save symbology because: %1 The directory containing your dataset needs to be writeable! Created default style file as %1 ERROR: Failed to created default style file as %1. Check file permissions and retry. QgsMapToolAddFeature Not a vector layer The current layer is not a vector layer 2.5D shape type not supported Adding features to 2.5D shapetypes is not supported yet Layer cannot be added to Stratul nu poate fi adaugat la The data provider for this layer does not support the addition of features. Furnizorul de date corespunzator acestui layer nu suporta adaugarea de obiecte. Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Wrong editing tool Cannot apply the 'capture point' tool on this vector layer Coordinate transform error Cannot transform the point to the layers coordinate system Feature added Cannot apply the 'capture line' tool on this vector layer Cannot apply the 'capture polygon' tool on this vector layer Error Eroare Cannot add feature. Unknown WKB type The feature could not be added because removing the polygon intersections would change the geometry type An error was reported during intersection removal QgsMapToolAddIsland Not a vector layer The current layer is not a vector layer Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. No feature selected. Please select a feature with the selection tool or in the attribute table Several features are selected. Please select only one feature to which an island should be added. Error, could not add island Coordinate transform error Cannot transform the point to the layers coordinate system Part added Selected feature is not a multipolygon New ring is not a valid geometry New polygon ring not disjoint with existing polygons Selected geometry could not be found QgsMapToolAddRing Not a vector layer The current layer is not a vector layer Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Coordinate transform error Cannot transform the point to the layers coordinate system Ring added A problem with geometry type occured The inserted Ring is not closed The inserted Ring is not a valid geometry The inserted Ring crosses existing rings The inserted Ring is not contained in a feature An unknown error occured Error, could not add ring QgsMapToolAddVertex Added vertex QgsMapToolDeletePart Delete part This isn't a multipart geometry. Part of multipart feature deleted Couldn't remove the selected part. QgsMapToolDeleteRing Ring deleted QgsMapToolDeleteVertex Vertex deleted QgsMapToolIdentify No features found Nici un obiect nu a fost găsit - %1 features found Identify results window title (clicked coordinate) No active layer Nu există nici un layer activat To identify features, you must choose an active layer by clicking on its name in the legend Band Bandă Identifying on %1... Identifying done. No features at this position found. Length Lungime firstX attributes get sorted; translation for lastX should be lexically larger than this one firstY lastX attributes get sorted; translation for firstX should be lexically smaller than this one lastY Area Suprafaţă feature id new feature WMS layer Feature info Raster action acţiune No features were found in the active layer at the point you clicked Nici un obiect nu a fost găsit in stratul activ, în punctul selectat %1 - %n feature(s) found Identify results window title QgsMapToolMoveFeature Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Feature moved QgsMapToolMoveVertex Vertex moved QgsMapToolNodeTool Node tool Feature was deleted on background. Inserted vertex QgsMapToolReshape Not a vector layer The current layer is not a vector layer Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Coordinate transform error Cannot transform the point to the layers coordinate system Reshape QgsMapToolRotatePointSymbols No point feature No point feature was detected at the clicked position. Please click closer to the feature or enhance the search tolerance under Settings->Options->Digitizing->Serch radius for vertex edits No rotation Attributes The active point layer does not have a rotation attribute Rotate symbol QgsMapToolSelect No active layer Nu există nici un layer activat To select features, you must choose a vector layer by clicking on its name in the legend CRS Exception Selection extends beyond layer's coordinate system. QgsMapToolSimplify Geometry simplified Unsupported operation Multipart features are not supported for simplification. This feature cannot be simplified. Check if feature has enough vertices to be simplified. QgsMapToolSplitFeatures Split error An error occured during feature splitting No feature split done Features split If there are selected features, the split tool only applies to the selected ones. If you like to split all features under the split line, clear the selection Not a vector layer The current layer is not a vector layer Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Coordinate transform error Cannot transform the point to the layers coordinate system QgsMapToolVertexEdit Snap tolerance Don't show this message again Could not snap segment. Have you set the tolerance in Settings > Project Properties > General? QgsMapserverExport Overwrite File? Yes Da No Nu %1 exists. Do you want to overwrite it? QgsMapserverExportBase Export to Mapserver Map file Export LAYER information only &Help &Ajutor F1 F1 &OK &OK &Cancel &Renunţă ... ... Map Hartă Name Nume Height Înălţime Units Unităţi Image type gif gtiff jpeg png swf userdefined wbmp MinScale MaxScale Prefix attached to map, scalebar and legend GIF filenames created using this MapFile. It should be kept short. Width Lăţime Web Interface Definition Header Footer Template Path to the MapServer template file Prefix attached to map, scalebar and legend GIF filenames created using this MapFile Name for the map file to be created from the QGIS project file Full path to the QGIS project file to export to MapServer map format If checked, only the layer information will be processed Options Opţiuni Forces labels on, regardless of collisions. Available only for cached labels. Check to allow MapServer to return data in GML format. Useful when used with WMS GetFeatureInfo operations. Force MapServer Export: Save project to MapFile Use current project LAYER information only Rendering The URL to the mapserver executable. For example: http://my.host.com/cgi-bin/mapserv.exe Inline Symbolset Use templates The file name of the fonts file. Fontset The file name of the symbols file. Layer/label options Should text be antialiased? Note that this requires more available colors, decreases drawing performance, and results in slightly larger output images. Anti-alias Can text run off the edge of the map? Partials Dump Paths MapServer url Browse... Save As... QgsMarkerDialogBase ... ... Ok Ok QgsMeasureBase Measure Măsurare Total: Total: Total Help Ajutor New Noua Cl&ose &Închidere Segments QgsMeasureDialog &New &Nou Segments (in meters) Segments (in feet) Segments (in degrees) Segments QgsMeasureTool Incorrect measure results This map is defined with a geographic coordinate system (latitude/longitude) but the map extents suggests that it is actually a projected coordinate system (e.g., Mercator). If so, the results from line or area measurements will be incorrect.To fix this, explicitly set an appropriate map coordinate system using the <tt>Settings:Project Properties</tt> menu. QgsMergeAttributesDialog Id Id Merge feature %1 Minimum Maximum Median Concatenation Mean Media QgsMergeAttributesDialogBase Merge feature attributes Take attributes from selected feature Remove feature from selection QgsMessageViewer QGIS Message Mesaj QGIS Don't show this message again Nu mai arata acest mesaj inca o data. Close Închidere QgsMySQLProvider Error Eroare QgsNewConnection Test connection Test conexiune Connection to %1 was successfull Conectarea la %1 a fost incununata de succes. Connection failed - Check settings and try again. Extended error information: Conectare eşuată. Informaţii suplimentare cu privire la eroare: QgsNewConnectionBase Create a New PostGIS connection Crează o nouă conexiune PostGIS Connection Information Informaţii conexiune <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">Restrict the search to the public schema for spatial tables not in the geometry_columns table</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">Restrict the search to the public schema for spatial tables not in the geometry_columns table</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)</body></html> Only look in the 'public' schema considera doar schema 'public' <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Restrict the displayed tables to those that are in the geometry_columns table</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Restrict the displayed tables to those that are in the geometry_columns table</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Restricts the displayed tables to those that are in the geometry_columns table. This can speed up the initial display of spatial tables.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Restricts the displayed tables to those that are in the geometry_columns table. This can speed up the initial display of spatial tables.</body></html> Only look in the geometry_columns table Considera doar tabela geometry_columns Save Password Salvare parola Test Connect Test conexiune Name Nume Host Adresă (host) Database Baza de date Port Port Username Nume Utilizator (Login) Password Parola Name of the new connection Numele conexiunii noi 5432 5432 OK Ok Cancel Renuţare Help Ajutor F1 F1 QgsNewHttpConnection Save connection Should the existing connection %1 be overwritten? QgsNewHttpConnectionBase Connection Information Informaţii conexiune Name of the new connection Numele conexiunii noi Name Nume URL HTTP address of the Web Map Server &User name Help Ajutor F1 F1 Create a new WMS connection Connection details If the WMS requires basic authentication, enter a user name and optional password Password Parola QgsNewOgrConnection Test connection Test conexiune Connection failed - Check settings and try again. Extended error information: %1 Connection to %1 was successful Save connection Should the existing connection %1 be overwritten? QgsNewOgrConnectionBase Create a New OGR Database connection Connection Information Informaţii conexiune Save Password Test Connect Test conexiune &Test Connect <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> Type</body></html> Name Nume Host Adresă (host) Database Baza de date Port Port Username Nume Utilizator (Login) Password Parola Name of the new connection Numele conexiunii noi Help Ajutor F1 F1 QgsNewVectorLayerDialog Text data Whole number Decimal number ESRI Shapefile QgsNewVectorLayerDialogBase New Vector Layer Crează un nou layer tip Vector File format Type Tip Point Punct Line Linie Polygon Poligon New attribute Name Nume Width Lăţime Precision Precizie Remove selected attribute Add attribute to list Add to attributes list CRS ID Specify the coordinate reference system of the layer's geometry. Specify CRS Attributes list Delete selected attribute QgsNorthArrowPlugin Bottom Left Stanga jos Top Left Stanga sus Top Right Dreapta sus Bottom Right Dreapta jos &North Arrow Creates a north arrow that is displayed on the map canvas &Decorations &Decoratii North arrow pixmap not found QgsNorthArrowPluginGui Pixmap not found QgsNorthArrowPluginGuiBase North Arrow Plugin Angle Unghi Placement Pozitionare Set direction automatically Enable North Arrow Placement on screen Top Left Stanga sus Top Right Dreapta sus Bottom Left Stanga jos Bottom Right Dreapta jos Preview of north arrow ... ... &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C QgsOGRSublayersDialogBase Select OGR layers to load Sub layers list <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"> This is the list of all layers available in the datasource of the active layer. You can select the layers to load. The layers will be loaded when you press "OK". The layer name is format dependent. Consult the OGR documentation or the documentation of your data format to determine the nature of the included information. Be advised: selecting an already opened layer will not generate an error message and the layer will end up loaded twice!</body></html> 1 1 QgsOSMDataProvider Open Street Map format QgsOgrProvider Whole number (integer) Decimal number (real) Text (string) QgsOpenRasterDialog Choose a name of the raster Error Eroare The selected file is not a valid raster file. Choose a name for the modified raster -modified Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name Open raster Raster file: ... ... Save raster as: QgsOpenVectorLayerDialog Open an OGR Supported Vector Layer Deschide un strat accesat de OGR Open Directory Are you sure you want to remove the %1 connection and all associated settings? Confirm Delete Confirma stergerea Add vector layer No database selected. Password for Please enter your password: No protocol URI entered. No layers selected. No directory selected. QgsOpenVectorLayerDialogBase Add vector layer Source type File Fişier Directory Database Baza de date Protocol Encoding : BIG5 BIG5-HKSCS EUCJP EUCKR GB2312 GBK GB18030 JIS7 SHIFT-JIS TSCII UTF-8 UTF-16 KOI8-R KOI8-U ISO8859-1 ISO8859-2 ISO8859-3 ISO8859-4 ISO8859-5 ISO8859-6 ISO8859-7 ISO8859-8 ISO8859-8-I ISO8859-9 ISO8859-10 ISO8859-11 ISO8859-12 ISO8859-13 ISO8859-14 ISO8859-15 IBM 850 IBM 866 CP874 CP1250 CP1251 CP1252 CP1253 CP1254 CP1255 CP1256 CP1257 CP1258 Apple Roman TIS-620 Type Tip URI Source Dataset Browse Selectaţi Connections New Noua Edit Editare Delete Ştergere QgsOptions Semi transparent circle Cross Cruce Detected active locale on your system: %1 Current layer Top down, stop at first Top down To vertex To segment To vertex and segment None Niciunul/Niciuna Choose a directory Alegeti un director map units pixels Central point (fastest) Chain (fast) Popmusic tabu chain (slow) Popmusic tabu (slow) Popmusic chain (very slow) QgsOptionsBase Hide splash screen at startup Map display will be updated (drawn) after this many features have been read from the data source By default new la&yers added to the map should be displayed Make lines appear less jagged at the expense of some drawing performance <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Selecting this will unselect the 'make lines less' jagged toggle</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Selectarea acetei optiuni va deselecta otiunea de a face liniile mai putin in scari</body></html> Fix problems with incorrectly filled polygons <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;"> Note: Specify the search radius as a percentage of the map width. </body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Nota: Specificati raza de cautare ca procent din latimea hartii.</body></html> % Measure tool Panning and zooming Zoom Zoom and recenter Nothing Line color Default snapping tolerance Search radius for vertex edits Select Global Default ... ... ... &Ok &OK Alt+O Alt+O &Cancel &Renunţă General General Digitising Locale Locale to use instead Additional Info Detected active locale on your system: Selecting this will unselect the 'make lines less' jagged toggle Digitizing Digitizare Rubberband Line width in pixels Snapping Zoom to mouse cursor Options Opţiuni Project files Prompt to save project changes when required Warn when opening a project file saved with an older version of QGIS Default Map Appearance (overridden by project properties) Selection color Background color &Application Icon theme Capitalise layer names in legend Display classification attribute names in legend Open identify results in a dock window (QGIS restart required) Add PostGIS layers with double click and select in extended mode Rendering behavior Number of features to draw before updating the display Note: Use zero to prevent display updates until all features have been rendered Use render caching where possible to speed up redraws Rendering quality SVG paths Path(s) to search for Scalable Vector Graphic (SVG) symbols Preferred angle units Degrees Radians Gon Zoom factor Mouse wheel action WMS search address Rubberband color Ellipsoid for distance calculations Preferred measurements units Meters Feet Identify Compatibility Use new generation symbology for rendering Note: Specify the search radius as a percentage of the map width Search radius for identifying features and displaying map tips Mode Open feature form, if a single feature is identified Line width Mărimea liniei Default snap mode Vertex markers Show markers only for selected features Marker style Marker size Default Coordinate Reference System When a new layer is created, or when a layer is loaded that has no coordinate reference system (CRS) Override system locale Note: Enabling / changing overide on local requires an application restart Exclude URLs (starting with): Network & Proxy Use proxy for web access Host Adresă (host) Port Port User Leave this blank if no proxy username / password are required Password Parola Open attribute table in a dock window CRS Prompt for CRS Project wide default CRS will be used Global default CRS displa&yed below will be used Enter attribute values Suppress attributes pop-up windows after each created feature Timeout for network requests (ms): Proxy type Add Adauga Remove Ştergeţi Rendering & SVG Map tools Overlay Position Placement algorithm: map units pixels QgsOraclePlugin Select GeoRaster Open a Oracle Spatial GeoRaster &Oracle Spatial QgsOracleSelectGeoraster Are you sure you want to remove the %1 connection and all associated settings? Confirm Delete Confirma stergerea Password for %1/<password>@%2 Please enter your password: Open failed The connection to %1 failed. Please verify your connection parameters. Make sure you have the GDAL GeoRaster plugin installed. QgsPasteTransformations &Add New Transfer QgsPasteTransformationsBase Paste Transformations Note: This function is not useful yet! Source Destination &Help &Ajutor F1 F1 &OK &OK &Cancel &Renunţă QgsPatternDialogBase Ok Ok QgsPenCapStyleComboBox Square Pătrat Flat Round QgsPenJoinStyleComboBox Bevel Miter Round QgsPgGeoprocessing &Buffer features &Geoprocessing Buffer features in layer %1 Unable to add geometry column Unable to create table Error connecting to the database No GEOS support Buffer function requires GEOS support in PostGIS No Active Layer You must select a layer in the legend to buffer Not a PostgreSQL/PostGIS Layer Create a buffer for a PostgreSQL layer. A new layer is created in the database with the buffered features. Unable to add geometry column to the output table %1-%2 Failed to create the output table %1 %1 is not a PostgreSQL/PostGIS layer. Geoprocessing functions are only available for PostgreSQL/PostGIS Layers QgsPgNewConnection disable allow prefer require Save connection Should the existing connection %1 be overwritten? Test connection Test conexiune Connection to %1 was successful Connection failed - Check settings and try again. Extended error information: %1 QgsPgNewConnectionBase Create a New PostGIS connection Crează o nouă conexiune PostGIS Connection Information Informaţii conexiune Name Nume Host Adresă (host) Database Baza de date Port Port Username Nume Utilizator (Login) Password Parola SSL mode Name of the new connection Numele conexiunii noi 5432 5432 Save Username Save Password &Test Connect Restrict the displayed tables to those that are in the geometry_columns table Restricts the displayed tables to those that are in the geometry_columns table. This can speed up the initial display of spatial tables. Only look in the geometry_columns table Considera doar tabela geometry_columns Restrict the search to the public schema for spatial tables not in the geometry_columns table When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time) Only look in the 'public' schema considera doar schema 'public' QgsPgQueryBuilder The where clause returned %n row(s). returned test rows QgsPgQueryBuilderBase Test Test Ok Ok < < > > QgsPgSourceSelect &Add &Adauga Wildcard RegExp All Schema Table Type Tip Geometry column Primary key column Sql Sql Are you sure you want to remove the %1 connection and all associated settings? Confirm Delete Confirma stergerea Select Table You must select a table in order to add a layer. Connection failed Connection to %1 on %2 failed. Either the database is down or your settings are incorrect. Check your username and password and try again. The database said: %3 Accessible tables could not be determined Database connection was successful, but the accessible tables could not be determined. The error message from the database was: %1 No accessible tables found Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry. QgsPgSourceSelectBase Add PostGIS Table(s) Adauga tabela PostGIS PostgreSQL Connections Conexiuni PostGIS Delete Ştergere Edit Editare New Noua Connect Conectare Help Ajutor F1 F1 Add Adauga Close Închidere Search: Search mode: Search in columns: Build query Save connections Load connections Search options... QgsPluginInstaller Couldn't parse output from the repository Couldn't open the local plugin directory Nothing to remove! Plugin directory doesn't exist: Failed to remove the directory: Check permissions or remove it manually Fetch Python Plugins... Install more plugins from remote repositories Looking for new plugins... QGIS Plugin Conflict: The Plugin Installer has detected an obsolete plugin which masks a newer version shipped with this QGIS version. This is likely due to files associated with a previous installation of QGIS. Please use the Plugin Installer to remove that older plugin in order to unmask the newer version shipped with this copy of QGIS. There is a new plugin available There is a plugin update available QGIS Python Plugin Installer Error reading repository: QgsPluginInstallerDialog QGIS Python Plugin Installer Error reading repository: all repositories connected This repository is connected unavailable This repository is enabled, but unavailable disabled This repository is disabled This repository is blocked due to incompatibility with your Quantum GIS version orphans any status not installed installed upgradeable and news This plugin is not installed This plugin is installed This plugin is installed, but there is an updated version available This plugin is installed, but I can't find it in any enabled repository This plugin is not installed and is seen for the first time This plugin is installed and is newer than its version available in a repository This plugin is incompatible with your Quantum GIS version and probably won't work. The required Python module is not installed. For more information, please visit its homepage and Quantum GIS wiki. This plugin seems to be broken. It has been installed but can't be loaded. Here is the error message: upgradeable new! invalid Note that it's an uninstallable core plugin installed version available version That's the newest available version There is no version available for download This plugin is broken This plugin requires a newer version of Quantum GIS at least This plugin requires a missing module only locally available Install plugin Reinstall plugin Upgrade plugin Install/upgrade plugin Downgrade plugin Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer! Plugin installation failed Plugin has disappeared The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory. Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue. Plugin installed successfully Python plugin installed. Now you need to enable it in Plugin Manager. Plugin reinstalled successfully Python plugin reinstalled. You need to restart Quantum GIS in order to reload it. The plugin is designed for a newer version of Quantum GIS. The minimum required version is: The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it: The plugin is broken. Python said: Plugin uninstall failed Are you sure you want to uninstall the following plugin? Warning: this plugin isn't available in any accessible repository! Plugin uninstalled successfully Python plugin uninstalled. Note that you may need to restart Quantum GIS in order to remove it completely. You are about to add several plugin repositories that are neither authorized nor supported by the Quantum GIS team. Plugin authors generally make efforts to ensure that their work is useful and safe, however, we can assume no responsibility for them. Unable to add another repository with the same URL! Are you sure you want to remove the following repository? QgsPluginInstallerDialogBase QGIS Python Plugin Installer Help Ajutor Plugins Plugin-uri List of available and installed plugins Filter: Display only plugins containing this word in their metadata Display only plugins from given repository all repositories Display only plugins with matching status Status Starea actuala Name Nume Version Versiune Description Descriere: Author Repository Install, reinstall or upgrade the selected plugin Install/upgrade plugin Uninstall the selected plugin Uninstall plugin Repositories List of plugin repositories URL Check for updates on startup Add third party plugin repositories to the list Add 3rd party repositories Add a new plugin repository Add... Edit the selected repository Edit... Remove the selected repository Delete Ştergere The plugins will be installed to ~/.qgis/python/plugins Close the Installer window Close Închidere Options Opţiuni Configuration of the plugin installer every time QGIS starts once a day every 3 days every week every 2 weeks every month <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"> Note: If this function is enabled, Quantum GIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Installer window.</body></html> Allowed plugins Only show plugins from the official repository Show all plugins except those marked as experimental Show all plugins, even those marked as experimental <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"> Note: Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</body></html> QgsPluginInstallerFetchingDialog Success Resolving host name... Connecting... Host connected. Sending request... Downloading data... Idle Closing connection... Error Eroare QgsPluginInstallerFetchingDialogBase Fetching repositories Overall progress: Abort fetching Repository State QgsPluginInstallerInstallingDialog Installing... Resolving host name... Connecting... Host connected. Sending request... Downloading data... Idle Closing connection... Error Eroare Failed to unzip the plugin package. Probably it's broken or missing from the repository. You may also want to make sure that you have write permission to the plugin directory: Aborted by user QgsPluginInstallerInstallingDialogBase QGIS Python Plugin Installer Installing plugin: Connecting... QgsPluginInstallerPluginErrorDialog no error message received QgsPluginInstallerPluginErrorDialogBase Error loading plugin The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below: Do you want to uninstall this plugin now? If you're unsure, probably you would like to do this. QgsPluginInstallerRepositoryDetailsDialogBase Repository details Name: Nume: Enter a name for the repository URL: Enter the repository URL, beginning with "http://" Enable or disable the repository (disabled repositories will be omitted) Enabled QgsPluginManager Choose a directory Alegeti un director No Plugins Nu există Plugin-uri No QGIS plugins found in Nu s-a gasit nici un pluginul QGIS in: Name Nume Version Versiune Description Descriere: &Select All Selectaţi tot &Clear All [ incompatible ] No QGIS plugins found in %1 Error Eroare Failed to open plugin installer! QgsPluginManagerBase QGIS Plugin Manger Administrare plugin-uri QGIS Plugin Directory Director Plugin-uri ... ... Name Nume Version Versiune Description Descriere: Library Name Numele Librăriei To load a plugin, click the checkbox next to the plugin and click Ok Pentru a incarca un plugin, selectati-l si apoi apasati OK &Select All Selectaţi tot Alt+S Alt+S C&lear All Dese&lectati tot Alt+L Alt+L &Ok &OK Alt+O Alt+O &Close &Închidere Alt+C Alt+C QGIS Plugin Manager To enable / disable a plugin, click its checkbox or description &Filter Plugin Directory: Directory Plugin Installer QgsPointDialog Zoom In Apropiere Zoom Out Depărtare Zoom To Layer Focusare pe Layer Zoom to Layer Focusare pe Layer Pan Map Mişcare hartă Pan the map Mişcare hartă . . Vectorizare Punct Capture Points Vectorizare Punct Delete Selected Sterge Obiecte Selectate Warning Atenţie Error Eroare QgsPointDialogBase ... ... Create Creaza Close Închidere QgsPointStyleWidgetBase Form3 Form3 Scale Scară QgsPostgresProvider Unable to access relation Unable to access the %1 relation. The error message from the database was: %2. SQL: %3 Unable to determine table access privileges for the %1 relation. The error message from the database was: %2. SQL: %3 Whole number (smallint - 16bit) Decimal number (numeric) Decimal number (decimal) Decimal number (real) Decimal number (double) Text, fixed length (char) No suitable key column in table and Unable to find a key column and is suitable. and has a suitable constraint) and does not have a suitable constraint) No suitable key column in view Unknown geometry type Qgis was unable to determine the type and srid of column %1 in %2. The database communication log was: %3 Unable to get feature type and srid Error while adding features Error while deleting features Error while adding attributes Error while deleting attributes Error while changing attributes Error while changing geometry values unexpected PostgreSQL error Whole number (integer - 32bit) Whole number (integer - 64bit) Text, limited variable length (varchar) Text, unlimited length (text) The unique index on column '%1' is unsuitable because Qgis does not currently support non-int4 type columns as a key into the table. The unique index based on columns %1 is unsuitable because Qgis does not currently support multiple columns as a key into the table. '%1' derives from '%2.%3.%4' and is not suitable (type is %1) Note: '%1' initially appeared suitable but does not contain unique data, so is not suitable. The view '%1.%2' has no column suitable for use as a unique key. Qgis requires that the view has a column that can be used as a unique key. Such a column should be derived from a table column of type int4 and be a primary key, have a unique constraint on it, or be a PostgreSQL oid column. To improve performance the column should also be indexed. The view you selected has the following columns, none of which satisfy the above conditions: Column %1 in %2 has a geometry type of %3, which Qgis does not currently support. The table has no column suitable for use as a key. Qgis requires that the table either has a column of type int4 with a unique constraint on it (which includes the primary key), has a PostgreSQL oid column or has a ctid column with a 16bit block number. QgsPostgresProvider::Conn No GEOS Support! Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net) No PostGIS Support! Your database has no working PostGIS support. QgsProject Unable to open %1 Project file read error: %1 at line %2 column %3 %1 for file %2 Unable to save to file %1 %1 is not writeable. Please adjust permissions (if possible) and try again. Unable to save to file %1. Your project may be corrupted on disk. Try clearing some space on the volume and check file permissions before pressing save again. QgsProjectBadLayerGuiHandler QGIS Project Read Error Eroare de citire a fisierului proiect Unable to open one or more project layers Try to find missing layers? QgsProjectProperties Layer Type Tip Identifiable Vector WMS Raster QgsProjectPropertiesBase Project Properties General General General settings Descriptive project name Default project title Layer units (only used when CRS transformation is disabled) Meters Feet Decimal degrees Degrees, Minutes, Seconds Precision Precizie Automatically sets the number of decimal places in the mouse position display The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display Automatic Sets the number of decimal places to use for the mouse position display Manual The number of decimal places for the manual option decimal places Digitizing Digitizare Avoid intersections of new polygons... Identifiable layers Layer Type Tip Identifiable &Help &Ajutor F1 F1 &Apply &Aplica Alt+A Alt+A &OK &OK &Cancel &Renunţă Enable topological editing Snapping options... Project title Selection color Background color absolute relative Save paths Coordinate Reference System (CRS) Enable 'on the fly' CRS transformation QgsProjectionSelector User Defined Coordinate Systems Geographic Coordinate Systems Projected Coordinate Systems Resource Location Error Error reading database file from: %1 Because of this the projection selector will not work... QgsProjectionSelectorBase Search Căutare Find Name Nume EPSG ID Spatial Reference System Sistem de referinta spatial Id Id Coordinate Reference System Selector Coordinate Reference System Sistem de referinta spatial EPSG ID QgsPublishToWebDialogBase Publish current project to web Publică proiectul curent pe Internet Publish Publică Cancel Renunţare Server Server Path to QGIS WMS server directory: Calea către directorul serverului QGIS WMS: Enter root password: Introduceţi parola pentru root: Project name: Nume Proiect: QgsPublishToWebPlugin &Publish to web &Publică pe Internet QgsQueryBuilder &Test &Clear Invalid Query Setting the query failed No Query You must create a query before you can test it Query Result The where clause returned %n row(s). returned test rows Query Failed An error occurred when executing the query Error in Query The subset string could not be set QgsQueryBuilderBase Query Builder Creator de Interogari Datasource Fields <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> List of fields in this vector file</body></html> Values <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> List of values for the current field.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> Take a sample of records in the vector file</body></html> Sample <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> Retrieve all the record in the vector file (if the table is big, the operation can consume some time)</body></html> All Operators = < < NOT OR AND % IN NOT IN != > > LIKE ILIKE >= <= SQL where clause Test Test Ok Ok QgsQuickPrint km mm cm m miles mile inches foot feet degree degrees unknown Please wait while your report is generated COMMENTED OUT QgsRasterLayer and all other files şi toate celelalte fişiere Not Set Nu este setat Raster Extent: Dimensiuni raster: Clipped area: Suprafaţa taiată: <center>Transparency</center> <center>Transparenta </center> Driver: Driver: Dataset Description Descriere set date Dimensions: Dimensiuni: X: X: Y: Y: Bands: Benzi: No Data Value Valoare pentru No-Data: Data Type: Tip date: GDT_Byte - Eight bit unsigned integer GDT_Byte GDT_UInt16 - Sixteen bit unsigned integer GDT_UInt16 GDT_Int16 - Sixteen bit signed integer GDT_Int16 GDT_UInt32 - Thirty two bit unsigned integer GDT_UInt32 GDT_Int32 - Thirty two bit signed integer GDT_Int32 GDT_Float32 - Thirty two bit floating point GDT_Float32 GDT_Float64 - Sixty four bit floating point GDT_Float64 GDT_CInt16 - Complex Int16 GDT_CInt16 GDT_CInt32 - Complex Int32 GDT_CInt32 GDT_CFloat32 - Complex Float32 GDT_CFloat32 GDT_CFloat64 - Complex Float64 GDT_CFloat64 Could not determine raster data type. Nu s-a putut stabili tipul rasterului. Pyramid overviews: Previzualizare piramida Layer Spatial Reference System: Sistemul de referinta spatial al acestui layer: Project Spatial Reference System: Sistemul de referinta spatial al proiectului: Origin: Origine: Pixel Size: Mărimea pixelului Band Statistics (if gathered): Statistici bandă (dacă există) Property Caracteristică Value Valoare Band Bandă Band No Nr. Bandă No Stats Statistici bandă inexistente No stats collected yet Statisticile benzii nu au fost colectate inca Min Val Valoare Min Max Val Valoare Max Range Raza Mean Media Sum of squares Suma pătratelor Standard Deviation Abaterea standard Sum of all cells Suma tuturor celulelor Cell Count Nr. celulelor Write access denied Access tip scriere nu este permis Write access denied. Adjust the file permissions and try again. Access tip scriere nu este permis. Modificaţi permisiunile fişierului si încercaţi din nou. Building pyramids failed. Construcţia piramidelor a eşuat. The file was not writeable. Some formats can not be written to, only read. You can also try to check the permissions and then try again. Fişierul nu poate fi scris. Anumite formate nu pot fi decat citite, nu şi scrise. Puteti verifica si permisiunile fisierului pentru orice eventualitate. Average Magphase Media Magphase Average Media Building pyramid overviews is not supported on this type of raster. Construcţia piramidelor nu este posibilă pentru acest tip de rater. out of extent in afara dimensiunilor null (no data) null (lipsă date) NoDataValue not set Band %1 Retrieving %1 using %2 %1 retrieved using %2 X: %1 Y: %2 Bands: %3 QgsRasterLayer created All other files (*) Retrieving stats for %1 Calculating stats for %1 QgsRasterLayerProperties Grayscale Scara de gri Pseudocolor Pseudo-culoare Freak Out Freak Out Not Set Nu este setat Palette Paleta de culori Columns: Coloane: Rows: Rînduri: No-Data Value: Valoare pentru No-Data: n/a nedisponibil <h3>Multiband Image Notes</h3>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:<ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul> <h3>Multiband Image Notes</h3>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:<ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul> <h3>Paletted Image Notes</h3> This image uses a fixed color palette. You can remap these colors in different combinations e.g.<ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul> <h3>Paletted Image Notes</h3> This image uses a fixed color palette. You can remap these colors in different combinations e.g.<ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul> <h3>Grayscale Image Notes</h3> You can remap these grayscale colors to a pseudocolor image using an automatically generated color ramp. <h3>Note la Imagine Grayscale</h3> Write access denied Access tip scriere nu este permis Write access denied. Adjust the file permissions and try again. Access tip scriere nu este permis. Modificaţi permisiunile fişierului si încercaţi din nou. Building pyramids failed. Construcţia piramidelor a eşuat. The file was not writeable. Some formats can not be written to, only read. You can also try to check the permissions and then try again. Fişierul nu poate fi scris. Anumite formate nu pot fi decat citite, nu şi scrise. Puteti verifica si permisiunile fisierului pentru orice eventualitate. Building pyramid overviews is not supported on this type of raster. Construcţia piramidelor nu este posibilă pentru acest tip de rater. No Stretch Stretch To MinMax Stretch And Clip To MinMax Clip To MinMax Discrete Equal interval Quantiles Description Descriere: Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Red Green Blue Percent Transparent Gray Gri Indexed Value Note: Minimum Maximum values are estimates, user defined, or calculated from the current extent User Defined No-Data Value: Not Set Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library. Save file Textfile (*.txt) QGIS Generated Transparent Pixel Value Export File Open file Import Error The following lines contained errors Read access denied Read access denied. Adjust the file permissions and try again. Color Ramp Default Style QGIS Layer Style File (*.qml) QGIS Colormap Linear Exact Please note that building internal pyramids may alter the original data file and once created they cannot be removed! Please note that building internal pyramids could corrupt your image - always make a backup of your data first! The file was not writeable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt. Custom color map entry QGIS Generated Color Map Export File Load Color Map Saved Style The color map for Band %n failed to load Note: Minimum Maximum values are actual values computed from the band(s) <h3>Multiband Image Notes</h3>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:<ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul> COMMENTED OUT <h3>Multiband Image Notes</h3>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:<ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul> <h3>Paletted Image Notes</h3> This image uses a fixed color palette. You can remap these colors in different combinations e.g.<ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul> COMMENTED OUT <h3>Paletted Image Notes</h3> This image uses a fixed color palette. You can remap these colors in different combinations e.g.<ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul> <h3>Grayscale Image Notes</h3> You can remap these grayscale colors to a pseudocolor image using an automatically generated color ramp. COMMENTED OUT <h3>Note la Imagine Grayscale</h3> Default R:%1 G:%2 B:%3 Columns: %1 Rows: %1 No-Data Value: %1 Write access denied. Adjust the file permissions and try again. The following lines contained errors %1 The color map for band %1 failed to load Unknown style format: %1 QgsRasterLayerPropertiesBase Raster Layer Properties Caracteristici ale stratului Raster Symbology Simbolizare Display Afisare Transparency: Transparenta: Full Total 0% 0% None Niciunul/Niciuna Grayscale Image Imagine gri Color Image Imagine Color Invert Color Map Paleta de culori inversata <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif"> Notes </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif">Note</body></html> Blue Albastru Green Verde Red Roşu Band Bandă Color Culoare Color Map Paleta de culori Std Deviations Abaterea standard Gray Gri General General Thumbnail Iconita Legend: Legendă: Palette: Paleta de culori Display Name: Afisare nume Layer Source: Sursa Strat Columns: Coloane: Rows: Rînduri: No Data: No Data: DebugInfo DebugInfo Scale Dependent Visibility Vizibilitate dependenta de scara Maximum scale at which this layer will be displayed. Scara maxima la care acest strat va fi afisat. Maximum 1: Maximum 1: Minimum scale at which this layer will be displayed. Scara minima la care acest strat va fi afisat. Minimum 1: Minimum 1: Spatial Reference System Sistem de referinta spatial Change Schimba Metadata Metadate Pyramids Piramide Pyramid Resolutions Rezoluţie piramida <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif"> Description Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed. Please note that building pyramids could corrupt your image - always make a backup of your data first! </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif">DescriptionLarge resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed.Please note that building pyramids could corrupt your image - always make a backup of your data first!</body></html> Resampling Method Metoda de Resampling Average Media Nearest Neighbour cel mai apropiat vecin Build Pyramids Construieşte piramide Histogram Histograma Options Opţiuni Column Count: Nr. coloane: Out Of Range OK? Afara din raza ok? Allow Approximation Permite aproximarea Chart Type Tip de diagrama Line Graph Diagrama tip linie Bar Chart Diagrame cu bare Refresh Actualizează &Help &Ajutor F1 F1 &Apply &Aplica Alt+A Alt+A &OK &OK &Cancel &Renunţă <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif"> Description Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed. Please note that building pyramids could corrupt your image - always make a backup of your data first! </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif">DescriptionLarge resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed.Please note that building pyramids could corrupt your image - always make a backup of your data first!</body></html> {1"?} {9p?} {18p?} {14p?} {600"?} {0000"?} {0000"?} <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif"> Notes </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif">Note</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif"> Description Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed. Please note that building pyramids could corrupt your image - always make a backup of your data first! </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif">DescriptionLarge resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed.Please note that building pyramids could corrupt your image - always make a backup of your data first!</body></html> {1"?} {10p?} {18p?} {15p?} {600"?} {0000"?} {0000"?} Max Max Min Min 00% Render as ... ... Colormap Delete entry Classify 1 1 2 2 Single band gray Three band color RGB mode band selection and scaling Red band Green band Blue band Custom min / max values Red min Red max Green min Green max Blue min Blue max Single band properties Gray band Color map Invert color map Use standard deviation Note: Load min / max values from band Estimate (faster) Actual (slower) Current extent Load Contrast enhancement Current Save current contrast enhancement algorithm as default. This setting will be persistent between QGIS sessions. Saves current contrast enhancement algorithm as a default. This setting will be persistent between QGIS sessions. Default TextLabel Transparency Global transparency No data value Reset no data value Custom transparency options Transparency band Transparent pixel list Add values manually Add Values from display Remove selected row Default values Import from file Export to file Number of entries Color interpolation Classification mode Scale dependent visibility Maximum Minimum Layer source Display name Afisare nume Specify the coordinate reference system of the layer's geometry. Specify... Pyramid resolutions <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> </body></html> Resampling method Build pyramids Line graph Bar chart Column count Out of range OK? Allow approximation Restore Default Style Save As Default Load Style ... Save Style ... Default R:1 G:2 B:3 Add entry Sort Load color map from band Load color map from file Export color map to file Generate new color map Coordinate reference system Change ... Schimba ... Legend Legendă Palette Paleta de culori Notes Build pyramids internally if possible QgsRasterTerrainAnalysisDialog Slope Aspect Ruggedness index Total curvature Enter result file QgsRasterTerrainAnalysisDialogBase Raster based terrain analysis Analysis Input layer Output layer Output format ... ... Add result to project QgsRasterTerrainAnalysisPlugin &Raster based terrain analysis... Slope Aspect Ruggedness index Total curvature Calculating Abort... QgsRendererV2PropertiesDialog Symbology Simbolizare Do you wish to use the original symbology implementation for this layer? QgsRendererV2PropsDialogBase Renderer settings Renderer: Symbol levels Old symbology This renderer doesn't implement a graphical interface. QgsRunProcess Done Action Starting %1... Unable to run command %1 Unable to run command %1 QgsSOSSourceSelect Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea QgsSOSSourceSelectBase Server Connections Conexiuni Server &New &Nou Delete Ştergere Edit Editare C&onnect Conectare Name Nume Id Id QgsSVGDiagramFactoryWidget Select svg file Select new preview directory Creating icon for file %1 QgsSVGDiagramFactoryWidgetBase Form Search directories Add... Remove Ştergeţi SVG Preview ... ... QgsSVGFillSymbolLayerWidget Select svg texture file QgsScaleBarPlugin Bottom Left Stanga jos Top Left Stanga sus Top Right Dreapta sus Bottom Right Dreapta jos Tick Down Tick Up Bar Box &Scale Bar Creates a scale bar that is displayed on the map canvas &Decorations &Decoratii metres/km feet degrees km mm cm m foot degree unknown feet/miles miles mile inches QgsScaleBarPluginGuiBase Scale Bar Plugin &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C Automatically snap to round number on resize Placement Pozitionare Top Left Stanga sus Top Right Dreapta sus Bottom Left Stanga jos Bottom Right Dreapta jos Scale bar style Color of bar Click to select the color Size of bar Enable scale bar Select the style of the scale bar Tick Down Tick Up Box Bar <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This plugin draws a scale bar on the map. Please note the size option below is a 'preferred' size and may have to be altered by QGIS depending on the level of zoom. The size is measured according to the map units specified in the project properties.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This plugin draws a scale bar on the map. Please note the size option below is a 'preferred' size and may have to be altered by QGIS depending on the level of zoom. The size is measured according to the map units specified in the project properties.</body></html> QgsSearchQueryBuilder Found %d matching features. No matching features found. Nu au fost găsite caracteristici corespunzătoare. Search results Căutare în rezultate Search string parsing error Eroarea la analizarea criteriului de căutare No Records The query you specified results in zero records being returned. Search query builder &Test &Clear Found %n matching feature(s). test result QgsServerSourceSelect Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea Yes Da No Nu Coordinate Reference System Sistem de referinta spatial Coordinate Reference System (%1 available) Coordinate Reference System (%n available) crs count QgsServerSourceSelectBase Server Connections Conexiuni Server C&onnect Conectare Edit Editare Delete Ştergere &New &Nou Coordinate Reference System Sistem de referinta spatial Change ... Schimba ... Ready Gata &Add &Adauga Alt+A Alt+A Layers Layere (Straturi) Name Nume Title Titlu Abstract Rezumat Options Opţiuni Help Ajutor F1 F1 C&lose &Închidere Alt+L Alt+L Search Căutare Description Descriere: QgsShapeFile The database gave an error while executing this SQL: ... (rest of SQL trimmed) is appended to a truncated SQL statement Scanning The database gave an error while executing this SQL: %1 The error was: %2 The error was: %1 QgsSingleSymbolDialog Refresh markers None Niciunul/Niciuna Horizontal Orizontal Vertical Vertical Cross Cruce Texture QgsSingleSymbolDialogBase Single Symbol Simbol Unic In map units Drawing by field Rotation Area scale Symbol Fill options Outline options Width Lăţime Outline Width: Dimensiuni linie exterioară: Point Punct Size Dimensiuni Point Symbol ... ... Label QgsSnappingDialog to vertex to segment to vertex and segment map units pixels QgsSnappingDialogBase Snapping options Layer Mode Tolerance Units Unităţi QgsSpatiaLiteProvider Text Binary object (BLOB) Decimal number (double) Whole number (integer) SQLite error: %1 SQL: %2 QgsSpatiaLiteProvider::SqliteHandles Failure while connecting to: %1 %2 invalid metadata tables QgsSpatiaLiteSourceSelect &Add &Adauga Wildcard RegExp All Table Type Tip Geometry column SpatiaLite DB Open Error Failure while connecting to: %1 %2 seems to be a valid SQLite DB, but not a SpatiaLite's one ... unknown error cause @ Choose a SpatiaLite/SQLite DB to open Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea Select Table You must select a table in order to add a Layer. SpatiaLite getTableInfo Error Failure exploring tables from: %1 %2 Are you sure you want to remove the %1 connection and all associated settings? QgsSpatiaLiteSourceSelectBase Add SpatiaLite Table(s) Delete Ştergere New Noua Connect Conectare Help Ajutor F1 F1 Add Adauga Close Închidere Search options... SpatiaLite Databases Search Căutare Search mode Search in columns QgsSpatiaLiteTableModel Table Type Tip Geometry column Point Punct Multipoint Line Linie Multiline Polygon Poligon Multipolygon QgsSpit File Name Feature Class Features DB Relation Name Schema Confirm Delete Confirma stergerea Yes Da No Nu Add Shapefiles Shapefiles (*.shp);;All files (*.*) The following Shapefile(s) could not be loaded: REASON: File cannot be opened REASON: One or both of the Shapefile files (*.dbf, *.shx) missing General Interface Help: PostgreSQL Connections: [New ...] - create a new connection [Edit ...] - edit the currently selected connection [Remove] - remove the currently selected connection -you need to select a connection that works (connects properly) in order to import files -when changing connections Global Schema also changes accordingly Shapefile List: [Add ...] - open a File dialog and browse to the desired file(s) to import [Remove] - remove the currently selected file(s) from the list [Remove All] - remove all the files in the list [SRID] - Reference ID for the shapefiles to be imported [Use Default (SRID)] - set SRID to -1 [Geometry Column Name] - name of the geometry column in the database [Use Default (Geometry Column Name)] - set column name to 'the_geom' [Import] - import the current shapefiles in the list [Quit] - quit the program [Help] - display this help dialog Import Shapefiles You need to specify a Connection first Connection failed - Check settings and try again PostGIS not available The chosen database does not have PostGIS installed, but this is required for storage of spatial data. You need to add shapefiles to the list first Importing files Cancel Progress Problem inserting features from file: Import Shapefiles - Relation Exists %1 of %2 shapefiles could not be imported. Please enter your password: Are you sure you want to remove the [%1] connection and all associated settings? [Global Schema] - set the schema for all files to be imported into Password for %1 %1 Invalid table name. %1 No fields detected. %1 The following fields are duplicates: %2 Importing files %1 %1 Error while executing the SQL:%2The database said:%3 The Shapefile: %1 will use [%2] relation for its data, which already exists and possibly contains data. To avoid data loss change the "DB Relation Name" for this Shapefile in the main dialog file list. Do you want to overwrite the [%2] relation? QgsSpitBase SPIT - Shapefile to PostGIS Import Tool PostgreSQL connections Geometry column name Use default geometry column name SRID Use default SRID Primary key column name Global schema Add a shapefile to the list of files to be imported Add Adauga Remove the selected shapefile from the import list Remove Ştergeţi Remove all the shapefiles from the import list Remove All Set the SRID to the default value Set the geometry column name to the default value PostgreSQL Connections Conexiuni PostGIS Create a new PostGIS connection New Noua Remove the current PostGIS connection Connect Conectare Edit the current PostGIS connection Edit Editare Help Ajutor Close Închidere Import options and shapefile list Connect to PostGIS QgsSpitPlugin &Import Shapefiles to PostgreSQL Import shapefiles into a PostGIS-enabled PostgreSQL database. The schema and field names can be customized on import &Spit QgsStyleV2ManagerDialogBase Style Manager Style item type: Add item Edit item Remove item QgsSymbolLevelsV2DialogBase Symbol Levels Enable symbol levels QgsSymbolV2SelectorDialog Transparency: %1% QgsSymbolV2SelectorDialogBase Symbol selector Unit Millimeter Map unit Opacity Color Culoare Change Schimba Size Dimensiuni Rotation ° Width Lăţime Properties Add to style Symbols from style: QgsTINInterpolatorDialog Linear Clough-Toucher (cubic) Save triangulation to file QgsTINInterpolatorDialogBase Triangle based interpolation Interpolation method Export triangulation to shapefile after interpolation Output file ... ... QgsTransformOptionsDialog Dialog Select transformation type: Linear Polynomial 1 Polynomial 2 Polynomial 3 Thin plate spline (TPS) Generate ESRI world file (.tfw) QgsTransformSettingsDialog Linear Helmert Polynomial 1 Polynomial 2 Polynomial 3 Info Please set output name %1 requires at least %2 GCPs. Please define more Save raster _modified Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name Transformation settings Transformation type: Resampling method: Nearest neighbour Cubic Cubic Spline Lanczos Compression: NONE LZW PACKBITS DEFLATE Output raster: ... ... Target SRS: Set Target Resolution Horizontal Orizontal Vertical Vertical Use 0 for transparency when needed Load in QGIS when done QgsUniqueValueDialog default Confirm Delete Confirma stergerea The classification field was changed from '%1' to '%2'. Should the existing classes be deleted before classification? QgsUniqueValueDialogBase Form1 Form1 Classification Field: Atribut pentru clasificare: Classify Classification field Add class Delete classes Randomize Colors Reset Colors Restrict changes to common properties QgsVectorColorBrewerColorRampV2DialogBase ColorBrewer ramp Scheme name: Colors: Preview Previzualizare QgsVectorGradientColorRampV2DialogBase Gradient color ramp Color 1: Change Schimba Color 2: Preview Previzualizare QgsVectorLayer Attribute table - Tabela de atribute- Invert Selection... Invesare Selectie... Abort Renunta &Open attribute table &Afiseaza Tabela de atribute Allow Editing Editaţi Save as shapefile... Salvare ca shapefile... Layer cannot be added to Stratul nu poate fi adaugat la The data provider for this layer does not support the addition of features. Furnizorul de date corespunzator acestui layer nu suporta adaugarea de obiecte. Layer not editable Layerul nu este editabil The current layer is not editable. Choose 'Start editing' in the digitizing toolbar. Layerul curent nu este editabil. Apasati 'Permisiune de Editare' in bara de unelte pentru vectorizare. Provider does not support deletion Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Data provider does not support deleting features Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. The current layer is not editable. Choose 'Allow editing' in the legend item right click menu Layerul curent nu este editabil. Apasati 'Editare' in bara de unelte pentru vectorizare. Start editing failed Nu se poate incepe editarea Provider cannot be opened for editing Furnizorul de date nu poate fi accesat pentru editare. Stop editing Încetaţi editarea Do you want to save the changes? Sunteţi sigur că doriţi să salvati? &Yes &Da &No &Nu Error Eroare Could not commit changes Nu se pot salva modificarile efectuate. Problems during roll back Probleme la aducerea in starea anterioara (roll back) Could not commit the added features. Obiectele adaugate nu pot fi salvate (nu se poate face commit). No other types of changes will be committed at this time. Nici o alta modificare nu va fi salvata pentru moment. Could not commit the changed attributes. Atributele modificate nu pot fi salvate. However, the added features were committed OK. Totusi, Obiectele adaugate au putut fi salvate. Could not commit the changed geometries. Geometriile obiectellor modificate nu au putut fi salvate. However, the changed attributes were committed OK. Totusi, Atributele modificate au putut fi salvate. Could not commit the deleted features. Obiectele marcate pentru a fi sterse nu pot fi sterse definitiv. However, the changed geometries were committed OK. Totusi, geometriile modificate au putut fi salvate. Cannot retrieve features Nu se pot accesa obiectele. The provider for the current layer cannot retrieve geometry for the selected features. This version of the provider does not have this capability. Furnizorul de date corespunzator stratului curent nu poate accesa geometria obiectelor selectate. Vesriunea actuala a furnizorului de date nu poseda aceasta capacitate. The current layer is not editable. Choose 'Allow editing' in the legend item right click menu. Layerul curent nu este editabil. Apasati 'Editare' in bara de unelte pentru vectorizare, sau mai puteti activa editarea facand click dreapta pe stratul corespunzator din legenda. ERROR: no provider ERROR: layer not editable SUCCESS: attribute %1 was added. ERROR: attribute %1 not added No renderer object Classification field not found SUCCESS: %n attribute(s) deleted. deleted attributes count ERROR: %n attribute(s) not deleted. not deleted attributes count SUCCESS: %n attribute(s) added. added attributes count ERROR: %n new attribute(s) not added not added attributes count SUCCESS: %n attribute value(s) changed. changed attribute values count ERROR: %n attribute value change(s) not applied. not changed attribute values count SUCCESS: %n feature(s) added. added features count ERROR: %n feature(s) not added. not added features count SUCCESS: %n geometries were changed. changed geometries count ERROR: %n geometries not changed. not changed geometries count SUCCESS: %n feature(s) deleted. deleted features count ERROR: %n feature(s) not deleted. not deleted features count Unknown renderer QgsVectorLayerProperties Transparency: Transparenta: Single Symbol Simbol Unic Graduated Symbol Simbol Gradual Continuous Color simbol continuu Unique Value Valoare unică This button opens the PostgreSQL query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer Acest buton deschide fereastra pentru construirea interogarilor PostgreSQL si permite selectia unui subset de obiecte ce vor fi afisate pe harta mai degraba decat afisarea completa a tuturor obiectelor existente in acest strat The query used to limit the features in the layer is shown here. This is currently only supported for PostgreSQL layers. To enter or modify the query, click on the Query Builder button Interogarea utilizata pentru limitarea obiectelor afisate este aratata aici. Pentru modificare apasati butonul Constructie Interogare. functioneaza doar pentru un layer PostgeSQL. Spatial Index Index Spatial Creation of spatial index successfull Crearea indexului spatial a fost incununata de succes. Creation of spatial index failed Crearea indexului spatial a esuat. General: General: Storage type of this layer : Tipul de stocare al acestui strat este: Source for this layer : Sursa acestui strat este: Geometry type of the features in this layer : Tipul geometriei: The number of features in this layer : Numarul obiectelor din acest strat: Editing capabilities of this layer : Capacitatile de editare ale acestui layer: Extents: Dimensiuni: In layer spatial reference system units : Unitati de refererinta intra-layer: xMin,yMin xMin,yMin : xMax,yMax : xMax,yMax In project spatial reference system units : Unitati de refererinta intra-proiect: Layer Spatial Reference System: Sistemul de referinta spatial al acestui layer: Project (Output) Spatial Reference System: Sistemul de referinta spatial al proiectului: Attribute field info: Informatii despre atribute: Field Atribut Type Tip Length Lungime Precision Precizie Comment Default Style QGIS Layer Style File (*.qml) id name type length precision comment edit widget alias Name conflict The attribute could not be inserted. The name already exists in the table. Added attribute Deleted attribute This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button Line edit Unique values Unique values editable Classification Value map Edit range Slider range File name Hidden Checkbox Text edit Creation of spatial index successful Saved Style Select edit form UI file (*.ui) Symbology Simbolizare Transparency: %1% Enumeration Immutable Layer comment: %1 Storage type of this layer: %1 Source for this layer: %1 Geometry type of the features in this layer: %1 The number of features in this layer: %1 Editing capabilities of this layer: %1 xMin,yMin %1,%2 : xMax,yMax %3,%4 (Invalid transformation of layer extents) Load layer properties from style file (.qml) Save layer properties as style file (.qml) Do you wish to use the new symbology implementation for this layer? QgsVectorLayerPropertiesBase Layer Properties Caracteristici Strat Apply Aplica OK Ok Cancel Renuţare Help Ajutor Symbology Simbolizare Legend type: Tip Legendă: Transparency: Transparenta: General General New symbology Display name Afisare nume Display field for the Identify Results dialog box Camp de afisare pentru casuta de Identificare rezultate This sets the display field for the Identify Results dialog box Acesta seteaza campul de afisare pentru casuta de Identificare rezultate Display field Camp de afisare Use this control to set which field is placed at the top level of the Identify Results dialog box. A se utiliza pentru setarea atributului care va fi plasat in partea de sus a casutei de identificare rezultate. Edit UI ... ... Specify the coordinate reference system of the layer's geometry. Specify CRS Init function Use scale dependent rendering Utilizeaza rasdare in functie de scara Maximum 1: Maximum 1: Minimum 1: Minimum 1: Minimum scale at which this layer will be displayed. Scara minima la care acest strat va fi afisat. Maximum scale at which this layer will be displayed. Scara maxima la care acest strat va fi afisat. Spatial Index Index Spatial Create Spatial Index Creare index spatial Create Creaza Spatial Reference System Sistem de referinta spatial Change Schimba Subset Subset Query Builder Creator de Interogari Metadata Metadate Labels Etichete Display labels Afişează etichetele Actions Acţiuni Restore Default Style Save As Default Load Style ... Save Style ... Legend type Transparency Options Opţiuni Maximum Minimum Attributes Atribute New column Coloană nouă Ctrl+N Delete column Ştergeţi coloana Ctrl+X Ctrl+X Toggle editing mode Click to toggle table editing Field calculator QgsVectorRandomColorRampV2DialogBase Random color ramp Hue from to Saturation Value Valoare Classes Preview Previzualizare QgsVectorSymbologyWidgetBase Form2 Form2 Label Etichetă (Denumire) Min Min Max Max Symbol Classes: Clase Simboluri Count: Nr: Mode: Mod: Field: Atribut QgsWFSData Loading WFS data Abort Renunta QgsWFSPlugin &Add WFS layer &Adăugare layer WFS QgsWFSProvider unknown received %1 bytes from %2 QgsWFSSourceSelect Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Error Eroare The capabilities document could not be retrieved from the server Create a new WFS connection Modify WFS connection Confirm Delete Confirma stergerea Yes Da No Nu Are you sure you want to remove the %1 connection and all associated settings? QgsWFSSourceSelectBase Note: this plugin not considered stable yet. Use it on your own risk Notă: A se folosi pe propria raspundere. Title Titlu Name Nume Abstract Rezumat Coordinate Reference System Sistem de referinta spatial Change ... Schimba ... Help Ajutor F1 F1 &Add &Adauga Alt+A Alt+A C&lose &Închidere Alt+L Alt+L Server Connections Conexiuni Server Coordinate reference system Server connections &New &Nou Delete Ştergere Edit Editare C&onnect Conectare Add WFS Layer from a Server QgsWKNDiagramFactoryWidgetBase Form Attributes: Atribute Attributes Atribute Add Adauga Remove Ştergeţi 1 1 QgsWMSSourceSelect &Add &Adauga Are you sure you want to remove the %1 connection and all associated settings? Confirm Delete Confirma stergerea WMS Password for %1 WMS Provider Could not open the WMS Provider Select Layer You must select at least one leaf layer first. Coordinate Reference System Sistem de referinta spatial There are no available coordinate reference system for the set of layers you've selected. Coordinate Reference System (%n available) crs count Could not understand the response. The %1 provider said: %2 COMMENTED OUT Could not understand the response. The %1 provider said: %2 WMS proxies Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog. The %1 connection already exists. Do you want to overwrite it? Confirm Overwrite QgsWMSSourceSelectBase Add Layer(s) from a Server Servers C&onnect Conectare &New &Nou Edit Editare Delete Ştergere Adds a few example WMS servers Add default servers ID Name Nume Title Titlu Abstract Rezumat Save Salvare Load Layer Order Layer Style Server Search Search Căutare URL Description Descriere: Add selected row to WMS list Image encoding Options Opţiuni Layer name Coordinate Reference System Sistem de referinta spatial Change ... Schimba ... Help Ajutor F1 F1 &Add &Adauga Alt+A Alt+A C&lose &Închidere Alt+L Alt+L Ready Gata QgsWmsProvider Tried URL: HTTP Exception WMS Service Exception This is probably due to an incorrect WMS Server URL. Could not get WMS Service Exception at %1: %2 at line %3 column %4 Request contains a Format not offered by the server. Request contains a CRS not offered by the server for one or more of the Layers in the request. Request contains a SRS not offered by the server for one or more of the Layers in the request. GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map. Request is for a Layer in a Style not offered by the server. GetFeatureInfo request is applied to a Layer which is not declared queryable. GetFeatureInfo request contains invalid X or Y value. Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number. Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number. Request does not include a sample dimension value, and the server did not declare a default value for that dimension. Request contains an invalid sample dimension value. Request is for an optional operation that is not supported by the server. The WMS vendor also reported: Server Properties: Property Caracteristică Value Valoare WMS Version Title Titlu Abstract Rezumat Keywords Online Resource Contact Person Fees Access Constraints Image Formats Identify Formats Layer Count Selected Yes Da No Nu Visibility Visible Hidden n/a nedisponibil Can Identify Can be Transparent Can Zoom In Cascade Count Fixed Width Fixed Height WGS 84 Bounding Box Available in style Name Nume Layer cannot be queried. Dom Exception Tried URL: %1 Could not get WMS capabilities: %1 at line %2 column %3 Could not get WMS capabilities in the expected format (DTD): no %1 or %2 found (No error code was reported) (Unknown error code) GetFeatureInfoUrl Layer Properties: QuickPrint Replace this with a short description of the what the plugin does A se înlocui cu o scurtă descriere a functionalitatii acestui plugin QuickPrintGui Portable Document Format (*.pdf) quickprint Unknown format: %1 QuickPrintGuiBase QGIS Plugin Template Matriţă pentru QGIS Plugin Plugin Template Matriţă Plugin QGIS Quick Print Plugin Map title Map name Copyright Page size Output Rezultat Use last filename but incremented. last used filename but incremented will be shown here Prompt for file name Note: If you want more control over the map layout please use the map composer function in QGIS. QuickPrintPlugin Quick Print Replace this with a short description of the what the plugin does A se înlocui cu o scurtă descriere a functionalitatii acestui plugin &Quick Print Provides a way to quickly produce a map with minimal user input. RepositoryDetailsDialog Name: Nume: SelectGeoRasterBase Select Oracle Spatial GeoRaster Server Connections Conexiuni Server C&onnect Conectare Edit Editare Delete Ştergere &New &Nou Selection Update Ready Gata Alt+A Alt+A Subdatasets Help Ajutor F1 F1 C&lose &Închidere Alt+L Alt+L SelectionFeature ring %1, vertex %2 polygon %1, ring %2, vertex %3 polyline %1, vertex %2 vertex %1 point %1 single point Node tool Result geometry is invalid. Reverting last changes. SimplifyLineDialog Simplify line tolerance Set tolerance OK UndoWidget Undo/Redo Undo Redo VisualDialog Error! Please specify input vector layer Please specify input field Check geometry validity Geometry errors Total encountered errors List unique values Unique values Total unique values Basics statistics Statistics output Nearest neighbour analysis Nearest neighbour statistics Cancel Parameter Value Valoare WidgetFontMarker Form Font family Color Culoare Change Schimba Size Dimensiuni Rotation ° WidgetLineDecoration Form Color: Change Schimba WidgetMarkerLine Form Marker: Change Schimba Marker interval: Rotate marker Line offset: WidgetSVGFill Form Texture width: Outline: Change Schimba ... ... WidgetSimpleFill Form Color: Change Schimba Border color: Fill style: Border style: Border width: WidgetSimpleLine Form Color: Change Schimba Pen width: Pen style: Offset: Use custom dash pattern Join style: Cap style: WidgetSimpleMarker Form Border color: Change Schimba Fill color: Size: Angle: Offset X,Y: WidgetSvgMarker Form Size: Angle: Offset X,Y: SVG Image: [pluginname]Gui QGIS Plugin Template Matriţă pentru QGIS Plugin Plugin Template Matriţă Plugin [pluginname]GuiBase QGIS Plugin Template Matriţă pentru QGIS Plugin &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C Plugin Template Matriţă Plugin <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Welcome to your automatically generated plugin!This is just a starting point. You now need to modify the code to make it do something useful....read on for a more information to get yourself started.Documentation:You really need to read the QGIS API Documentation now at:http://svn.qgis.org/api_doc/html/In particular look at the following classes:QGisInterface : http://svn.qgis.org/api_doc/html/classQgisInterface.htmlQGisIface : http://svn.qgis.org/api_doc/html/classQgisIface.htmlQgsMapTool : http://svn.qgis.org/api_doc/html/classQgsMapTool.htmlQgsPlugin : http://svn.qgis.org/api_doc/html/classQgisPlugin.htmlQGisIface is an abstract base class (ABC) that specifies what publicly available features of QGIS are exposed to third party code and plugins. QgisInterface is an concrete implementation of this ABC. The preferred way to carry out operations on QGIS is via the QGisInterface. An instance of the QgisInterface is passed to the plugin when it loads. Please consult the QGIS development team if there is functionality required in the QGisInterface that is not available.QgsPlugin is an ABC that defines required behaviour your plugin must provide. See below for more details.What are all the files in my generated plugin directory for?Makefile.am This is the generated Makefile specification for your plugin. You will see that specifies c++ include paths (-I) and library linkages -l) to Qt4, GDAL, GEOS, QGIS Core, QGIS Ui, QGIS Gui and QGis Raster. You should add you application specific dependencies and source files to this Makefile.[pluginlcasename].h[pluginlcasename].cpp This is the class that provides the 'glue' between your custom application logic and the QGIS application. You will see that a number of methods are already implemented for you - including some examples of how to add a raster or vector layer to the main application map canvas. This class is a concrete instance of the QgisPlugin interface which defines required behaviour for a plugin. In particular, a plugin has a number of static methods and members so that the QgsPluginManager and plugin loader logic can identify each plugin, create an appropriate menu entry for it etc. Note there is nothing stopping you creating multiple toolbar icons and menu entries for a single plugin. By default though a single menu entry and toolbar button is created and its pre-configured to call the run() method in this class when selected. This default implementation provided for you by the plugin builder is well documented, so please refer to the code for further advice.[pluginlcasename]guibase.ui [pluginlcasename]guibase.ui.h This is an Abstract Base Class implemented in Qt4 fashion as a Qt designer 'ui' file. It defines the look of the default plugin dialog without implementing any application logic. You can modify this form to suite your needs or completely remove it if your plugin does not need to display a user form (e.g. for custom MapTools).[pluginlcasename]gui.cpp [pluginlcasename]gui.h This is the concrete class where application logic for the above mentioned dialog should go. The world is your oyster here really....[pluginlcasename].qrc This is the Qt4 resources file for your plugin. The Makefile generated for your plugin is all set up to compile the resource file so all you need to do is add your additional icons etc using the simple xml file format. Note the namespace used for all your resources e.g. (":/[pluginname]/"). It is important to use this prefix for all your resources. We suggest you include any other images and run time data in this resurce file too.[pluginlcasename].png This is the icon that will be used for your plugin menu entry and toolbar icon. Simply replace this icon with your own icon to make your plugin disctinctive from the rest.READMEThis file contains the documentation you are reading now!Getting developer help:For Questions and Comments regarding the plugin builder template and creating your features in QGIS using the plugin interface please contact us via: * the QGIS developers mailing list, or * IRC (#qgis on freenode.net)QGIS is distributed under the Gnu Public License. If you create a useful plugin please consider contributing it back to the community.Have fun and thank you for choosing QGIS.The QGIS Team2006</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Bine ati venit. Acesta este un plugin generat automat.This is just a starting point. You now need to modify the code to make it do something useful....read on for a more information to get yourself started.Documentation:You really need to read the QGIS API Documentation now at:http://svn.qgis.org/api_doc/html/In particular look at the following classes:QGisInterface : http://svn.qgis.org/api_doc/html/classQgisInterface.htmlQGisIface : http://svn.qgis.org/api_doc/html/classQgisIface.htmlQgsMapTool : http://svn.qgis.org/api_doc/html/classQgsMapTool.htmlQgsPlugin : http://svn.qgis.org/api_doc/html/classQgisPlugin.htmlQGisIface is an abstract base class (ABC) that specifies what publicly available features of QGIS are exposed to third party code and plugins. QgisInterface is an concrete implementation of this ABC. The preferred way to carry out operations on QGIS is via the QGisInterface. An instance of the QgisInterface is passed to the plugin when it loads. Please consult the QGIS development team if there is functionality required in the QGisInterface that is not available.QgsPlugin is an ABC that defines required behaviour your plugin must provide. See below for more details.What are all the files in my generated plugin directory for?Makefile.am This is the generated Makefile specification for your plugin. You will see that specifies c++ include paths (-I) and library linkages -l) to Qt4, GDAL, GEOS, QGIS Core, QGIS Ui, QGIS Gui and QGis Raster. You should add you application specific dependencies and source files to this Makefile.[pluginlcasename].h[pluginlcasename].cpp This is the class that provides the 'glue' between your custom application logic and the QGIS application. You will see that a number of methods are already implemented for you - including some examples of how to add a raster or vector layer to the main application map canvas. This class is a concrete instance of the QgisPlugin interface which defines required behaviour for a plugin. In particular, a plugin has a number of static methods and members so that the QgsPluginManager and plugin loader logic can identify each plugin, create an appropriate menu entry for it etc. Note there is nothing stopping you creating multiple toolbar icons and menu entries for a single plugin. By default though a single menu entry and toolbar button is created and its pre-configured to call the run() method in this class when selected. This default implementation provided for you by the plugin builder is well documented, so please refer to the code for further advice.[pluginlcasename]guibase.ui [pluginlcasename]guibase.ui.h This is an Abstract Base Class implemented in Qt4 fashion as a Qt designer 'ui' file. It defines the look of the default plugin dialog without implementing any application logic. You can modify this form to suite your needs or completely remove it if your plugin does not need to display a user form (e.g. for custom MapTools).[pluginlcasename]gui.cpp [pluginlcasename]gui.h This is the concrete class where application logic for the above mentioned dialog should go. The world is your oyster here really....[pluginlcasename].qrc This is the Qt4 resources file for your plugin. The Makefile generated for your plugin is all set up to compile the resource file so all you need to do is add your additional icons etc using the simple xml file format. Note the namespace used for all your resources e.g. (":/[pluginname]/"). It is important to use this prefix for all your resources. We suggest you include any other images and run time data in this resurce file too.[pluginlcasename].png This is the icon that will be used for your plugin menu entry and toolbar icon. Simply replace this icon with your own icon to make your plugin disctinctive from the rest.READMEThis file contains the documentation you are reading now!Getting developer help:For Questions and Comments regarding the plugin builder template and creating your features in QGIS using the plugin interface please contact us via: * the QGIS developers mailing list, or * IRC (#qgis on freenode.net)QGIS is distributed under the Gnu Public License. If you create a useful plugin please consider contributing it back to the community.Have fun and thank you for choosing QGIS.The QGIS Team2006</body></html> dxf2shpConverter Converts DXF files in Shapefile format &Dxf2Shp dxf2shpConverterGui QGIS Plugin Template Matriţă pentru QGIS Plugin Polygon Poligon Point Punct Browse Selectaţi Dxf Importer Input and output Input Dxf file ... ... Output file Output file type Polyline Export text labels Fields description: * Input DXF file: path to the DXF file to be converted * Output Shp file: desired name of the shape file to be created * Shp output file type: specifies the type of the output shape file * Export text labels checkbox: if checked, an additional shp points layer will be created, and the associated dbf table will contain informations about the "TEXT" fields found in the dxf file, and the text strings themselves --- Developed by Paolo L. Scala, Barbara Rita Barricelli, Marco Padula CNR, Milan Unit (Information Technology), Construction Technologies Institute. For support send a mail to scala@itc.cnr.it Choose a DXF file to open Choose a file name to save to eVis eVis Database Connection eVis Event Id Tool eVis Event Browser Create layer from a database query Open an Event Browers and display the selected feature Open an Event Browser to explore the current layer's features eVisDatabaseConnectionGui Undefined No predefined queries loaded Open File New Database connection requested... Error: You must select a database type Error: No host name entered Error: No database name entered Connection to [%1.%2] established Connection to [%1.%2] failed: %3 Error: Unabled to open file [%1] Error: Query failed: %1 Error: Could not create temporary file, process halted connected Tables Error: Parse error at line %1, column %2: %3 Error: A database connection is not currently established eVisDatabaseConnectionGuiBase Database Connection Load predefined queries Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide. The description of the selected query. Predefined Queries Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window. not connected <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;"> Connection Status: </body></html> Database Host Enter the database host. If the database resides on your desktop you should enter ¨localhost¨. If you selected ¨MSAccess¨ as the database type this option will not be available. Password to access the database. Enter the name of the database. Username Nume Utilizator (Login) Enter the port through which the database must be accessed if a MYSQL database is used. Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established. Connect Conectare User name to access the database. Select the type of database from the list of supported databases in the drop-down menu. Database Name Password Parola Database Type Port Port SQL Query Run the query entered above. The status of the query will be displayed in the Output Console below. Run Query Enter the query you want to run in this window. A window for status messages to be displayed. Output Console eVisDatabaseLayerFieldSelectionGuiBase Database File Selection The name of the field that contains the Y coordinate of the points. The name of the field that contains the X coordinate of the points. Enter the name for the new layer that will be created and displayed in QGIS. Y Coordinate X Coordinate Name of New Layer eVisGenericEventBrowserGui Generic Event Browser Field Atribut Value Valoare Warning Atenţie This tool only supports vector data No active layers found Error Eroare Unable to connect to either the map canvas or application interface An invalid feature was received during initialization Event Browser - Displaying records 01 of %1 Event Browser - Displaying records %1 of %2 Attribute Contents Select Application All ( * ) eVisGenericEventBrowserGuiBase Display Afisare Use the Previous button to display the previous photo when more than one photo is available for display. Previous Use the Next button to display the next photo when more than one photo is available for display. Next All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green. 1 1 Image display area Display area for the image. Options Opţiuni Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path. If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below. If checked, the relative path values will be saved for the next session. Reset to default Resets the values on this line to the default setting. If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image. Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired. If checked, the Display Compass Bearing values will be saved for the next session. A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values. Define the compass offset using a field from the vector layer attribute table. From Attribute Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values. Define the compass offset manually. Manual If checked, the compass offset values will be saved for the next session. Resets the compass offset values to the default settings. The base path or url from which images and documents can be “relative” Base Path Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information. If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter. The Base Path onto which the relative path defined above will be appended. File path Attribute containing path to file Path is relative Remember this Reset Compass bearing Attribute containing compass bearing Display compass bearing Compass offset Relative paths If checked, the Base Path will be saved for the next session. If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file. Replace entire path/url stored in image path attribute with user defined Base Path (i.e. keep only filename from attribute) If checked, the current check-box setting will be saved for the next session. Clears the check-box on this line. Apply Path to Image rules when loading docs in external applications Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons. Configure External Applications File extension and external application in which to load a document of that type A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images. Extension Application Add new file type Add a new file type with a unique extension and the path for the application that can open the file. Delete current row Delete the file type highlighted in the table and defined by a file extension and a path to an associated application. eVisImageDisplayWidget Zoom in Zoom in to see more detail. Zoom out Zoom out to see more area. Zoom to full extent Zoom to display the entire image. fTools Quantum GIS version detected: This version of fTools requires at least QGIS version 1.0.0 Plugin will not be enabled. &Vector &Analysis Tools Distance matrix Sum line lengths Points in polygon Basic statistics List unique values Nearest neighbour analysis Mean coordinate(s) Line intersections &Research Tools Random selection Random selection within subsets Random points Regular points Vector grid Select by location Polygon from layer extent &Geoprocessing Tools Convex hull(s) Buffer(s) Intersect Union Symetrical difference Clip Dissolve Difference G&eometry Tools Export/Add geometry columns Check geometry validity Polygon centroids Delaunay triangulation Extract nodes Simplify geometries Multipart to singleparts Singleparts to multipart Polygons to lines &Data Management Tools Export to new projection Define current projection Join attributes Join attributes by location Split vector layer fTools Information geometryThread Polygon area Polygon perimeter Line length Point x coordinate Point y coordinate gpsPage No Nu grasslabel (1-256) 3D-Viewer (NVIZ) 3d Visualization Add a value to the current category values Add elements to layer (ALL elements of the selected layer type!) Add missing centroids to closed boundaries Add one or more columns to attribute table Allocate network Assign constant value to column Assign new constant value to column only if the result of query is TRUE Assign new value as result of operation on columns to column in attribute table Assign new value to column as result of operation on columns only if the result of query is TRUE Attribute field Attribute field (interpolated values) Attribute field to join Auto-balancing of colors for LANDSAT-TM raster Bicubic or bilinear spline interpolation with Tykhonov regularization Bilinear interpolation utility for raster maps Blend color components for two rasters by given ratio Blend red, green, raster layers to obtain one color raster Break (topologically clean) polygons (imported from non topological format, like ShapeFile). Boundaries are broken on each point shared between 2 and more polygons where angles of segments are different Break lines at each intersection of vector Brovey transform to merge multispectral and high-res panchromatic channels Buffer Build polylines from lines Calculate average of raster within areas with the same category in a user-defined base map Calculate covariance/correlation matrix for user-defined rasters Calculate error matrix and kappa parameter for accuracy assessment of classification result Calculate geometry statistics for vectors Calculate linear regression from two rasters: y = a + b*x Calculate median of raster within areas with the same category in a user-defined base map Calculate mode of raster within areas with the same category in a user-defined base map Calculate optimal index factor table for LANDSAT-TM raster Calculate raster surface area Calculate shadow maps from exact sun position Calculate shadow maps from sun position determinated by date/time Calculate statistics for raster Calculate univariate statistics for numeric attributes in a data table Calculate univariate statistics from raster based on vector objects Calculate univariate statistics from the non-null cells of raster Calculate univariate statistics of vector map features Calculate volume of data clumps, and create vector with centroids of clumps Category or object oriented statistics Cats Change category values and labels Change field Change layer number Change resolution Change the type of boundary dangle to line Change the type of bridges connecting area and island or 2 islands from boundary to line Change the type of geometry elements Choose appropriate format Columns management Compares bit patterns with raster Compress and decompress raster Compress raster Computes a coordinate transformation based on the control points Concentric circles Config Connect nodes by shortest route (traveling salesman) Connect selected nodes by shortest tree (Steiner tree) Connect vector to database Convert 2D vector to 3D by sampling raster Convert 2D vector to 3D vector by sampling of elevation raster. Default sampling by nearest neighbour Convert GRASS binary vector to GRASS ASCII vector Convert a raster to vector Convert a vector to raster Convert bearing and distance measurements to coordinates and vice versa Convert boundaries to lines Convert centroids to points Convert coordinates Convert coordinates from one projection to another (cs2cs frontend) Convert lines to boundaries Convert points to centroids Convert raster to vector areas Convert raster to vector lines Convert raster to vector points Convert vector to raster using attribute values Convert vector to raster using constant Convex hull Copy a table Copy also attribute table (only the table of layer 1 is currently supported) Count of neighbouring points Create 3D volume map based on 2D elevation and value rasters Create a MASK for limiting raster operation Create a map containing concentric rings Create a raster plane Create and add new table to vector Create and/or modify raster support files Create aspect raster from DEM (digital elevation model) Create cross product of category values from multiple rasters Create fractal surface of given fractal dimension Create grid in current region Create new layer with category values based upon user's reclassification of categories in existing raster Create new raster by combining other rasters Create new vector by combining other vectors Create new vector with current region extent Create nodes on network Create parallel line to input lines Create points Create points along input lines Create points/segments from input vector lines and positions Create quantization file for floating-point raster Create random 2D/3D vector points Create random cell values with spatial dependence Create random points Create random vector point contained in raster Create raster images with textural features from raster (first serie of indices) Create raster of distance to features in input layer Create raster of gaussian deviates with user-defined mean and standard deviation Create raster of uniform random deviates with user-defined range Create raster with contiguous areas grown by one cell Create raster with textural features from raster (second serie of indices) Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters Create shaded map Create slope raster from DEM (digital elevation model) Create standard vectors Create surface from rasterized contours Create vector contour from raster at specified levels Create vector contour from raster at specified steps Create watershed basin Create watershed subbasins raster Cut network by cost isolines DXF vector layer Database Baza de date Database connection Database file Database management Database parameters Delaunay triangulation (areas) Delaunay triangulation (lines) Delaunay triangulation, Voronoi diagram and convex hull Delete category values Develop images and group Develop map Directory of rasters to be linked Disconnect vector from database Display general DB connection Display list of category values found in raster Display projection information from PROJ.4 projection description file Display projection information from PROJ.4 projection description file and create a new location based on it Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it Display projection information from georeferenced ASCII file containing WKT projection description Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it Display projection information from georeferenced file (raster, vector or image) Display projection information of the current location Display raster category values and labels Display results of SQL selection from database Display the HTML manual pages of GRASS Display vector attributes Display vector map attributes with SQL Dissolves boundaries between adjacent areas sharing a common category number or attribute Download and import data from WMS server Drop column from attribute table E00 vector layer Execute any SQL statement Export Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region Export raster Export raster as non-georeferenced PNG image format Export raster series to MPEG movie Export raster to 8/24bit TIFF image at the resolution of the current region Export raster to ASCII text file Export raster to ESRI ARCGRID Export raster to GRIDATB.FOR map file (TOPMODEL) Export raster to Geo TIFF Export raster to POVRAY height-field file Export raster to PPM image at the resolution of the current region Export raster to VTK-ASCII Export raster to Virtual Reality Modeling Language (VRML) Export raster to binary MAT-File Export raster to binary array Export raster to text file as x,y,z values based on cell centers Export raster to various formats (GDAL library) Export vector Export vector table Export vector to DXF Export vector to GML Export vector to Mapinfo Export vector to POV-Ray Export vector to PostGIS Export vector to PostGIS (PostgreSQL) database table Export vector to SVG Export vector to Shapefile Export vector to VTK-ASCII Export vector to various formats (OGR library) Exports attribute tables into various format Extract features from vector Extract selected features Extracts terrain parameters from DEM Fast fourier transform for image processing File Fişier Fill lake from seed at given level Fill lake from seed point at given level Fill no-data areas in raster using v.surf.rst splines interpolation Filter and create depressionless elevation map and flow direction map from elevation raster Filter image Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from' Find shortest path on vector network GDAL raster layer GRASS MODULES GRASS shell Gaussian kernel density Generalization Generate raster of cumulative cost of moving between locations based on cost input raster Generate surface Generate vector contour lines Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp Graphical raster map calculator Help Ajutor Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function Hydrologic modelling Imagery Import Import ASCII raster Import DXF vector Import ESRI ARC/INFO ASCII GRID Import ESRI E00 vector Import GDAL supported raster Import GDAL supported raster and create a fitted location Import GRIDATB.FOR (TOPMODEL) Import MapGen or MatLab vector Import OGR vector Import OGR vectors in a given data source combining them in a GRASS vector Import OGR/PostGIS vector and create a fitted location Import SPOT VGT NDVI Import SRTM HGT Import US-NGA GEOnet Names Server (GNS) country file Import all OGR/PostGIS vectors in a given data source and create a fitted location Import attribute tables in various formats Import binary MAT-File(v4) Import binary raster Import geonames.org country files Import loaded raster Import loaded raster and create a fitted location Import loaded vector Import loaded vector and create a fitted location Import loaded vector selecting some features Import only some layers of a DXF vector Import raster Import raster from ASCII polygon/line Import raster from coordinates using univariate statistics Import vector Import vector from gps using gpsbabel Import vector from gps using gpstrans Import vector points from database table containing coordinates Input nodes Input table Interpolate surface Inverse distance squared weighting raster interpolation Inverse distance squared weighting raster interpolation based on vector points Inverse fast fourier transform for image processing Join table to existing vector table Layers categories management Line-of-sight raster analysis Link GDAL supported raster layer to a binary raster map layer Link GDAL supported raster to binary raster Link all GDAL supported rasters in a directory to binary rasters Make each output cell function of the values assigned to the corresponding cells in the input rasters Manage features Manage image colors Manage map colors Manage raster cells value Manage training dataset Map algebra Map type conversion MapGen or MatLab vector layer Mask Metadata support Mosaic up to 4 images Name for new raster file (specify file extension) Name for new vector file (specify file extension) Name of the table to create Neighborhood analysis Network analysis Network maintenance OGR file OGR vector layer Others Output GML file Output Shapefile Output layer name (used in GML file) Output raster values along user-defined transect line(s) Overlay Overlay maps Path to the OGR data source Percentage of first layer (0-99) Perform affine transformation (shift, scale and rotate, or GPCs) on vector Print projection information from a georeferenced file Print projection information from a georeferenced file and create a new location based on it Print projection information of the current location Projection conversion of vector Projection management Put geometry variables in database Query rasters on their category values and labels Random location perturbations of vector points Randomly partition points into test/train sets Raster Raster buffer Raster file matrix filter Raster neighbours analysis Raster support Re-project raster from a location to the current location Rebuild topology of all vectors in mapset Recategorize contiguous cells to unique categories Reclass category values Reclass category values using a column attribute (integer positive) Reclass category values using a rules file Reclass raster using reclassification rules Reclass raster with patches larger than user-defined area size (in hectares) Reclass raster with patches smaller than user-defined area size (in hectares) Reclassify raster greater or less than user-defined area size (in hectares) Recode categorical raster using reclassification rules Recode raster Reconnect vector to a new database Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function Region Region settings Regularized spline with tension raster interpolation based on vector points Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing Remove all lines or boundaries of zero length Remove bridges connecting area and island or 2 islands Remove dangles Remove duplicate area centroids Remove duplicate lines (pay attention to categories!) Remove existing attribute table of vector Remove outliers from vector point data Remove small angles between lines at nodes Remove small areas, the longest boundary with adjacent area is removed Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed Rename column in attribute table Report and statistics Reports Reports and statistics Reproject raster from another Location Reproject vector from another Location Resample raster using aggregation Resample raster using interpolation Resample raster. Set new resolution first Rescale the range of category values in raster Sample raster at site locations Save the current region as a named region Select features by attributes Select features overlapped by features in another map Set PostgreSQL DB connection Set boundary definitions by edge (n-s-e-w) Set boundary definitions for raster Set boundary definitions from raster Set boundary definitions from vector Set boundary definitions to current or default region Set color rules based on stddev from a map's mean value Set general DB connection Set general DB connection with a schema (PostgreSQL only) Set raster color table Set raster color table from existing raster Set raster color table from setted tables Set raster color table from user-defined rules Set region to align to raster Set the region to match multiple rasters Set the region to match multiple vectors Set user/password for driver/database Set/Show database connection for vector Sets the boundary definitions for a raster map Shrink current region until it meets non-NULL data from raster Simple map algebra Simplify vector Snap lines to vertex in threshold Solar and irradiation model Spatial analysis Spatial models Split lines to shorter segments Statistics Sum raster cell values Surface management Tables management Tabulate mutual occurrence (coincidence) of categories for two rasters Take vector stream data, transform it to raster, and subtract depth from the output DEM Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster Tassled cap vegetation index Terrain analysis Tests of normality on vector points Text file Thin no-zero cells that denote line features Toolset for cleaning topology of vector map Topology management Trace a flow through an elevation model Transform cells with value in null cells Transform features Transform image Transform null cells in value cells Transform value cells in null cells Type in map names separated by a comma Update raster statistics Update vector map metadata Upload raster values at positions of vector points to the table Upload vector values at positions of vector points Vector Vector buffer Vector geometry analysis Vector intersection Vector non-intersection Vector subtraction Vector union Vector update by other maps Visibility graph construction Voronoi diagram (area) Voronoi diagram (lines) Watershed Analysis Work with vector points Write only features link to a record Zero-crossing edge detection raster function for image processing pluginname Replace this with a short description of the what the plugin does A se înlocui cu o scurtă descriere a functionalitatii acestui plugin [menuitemname] &[menuname] Replace this with a short description of what the plugin does visualThread Max. len: Min. len: Mean. len: Filled: Empty: N: Mean: StdDev: Sum: Min: Max: CV: Number of unique values: Range: Median: Observed mean distance: Expected mean distance: Nearest neighbour index: Z-Score: Feature %1 contains an unnested hole Feature %1 is not closed Feature %1 is self intersecting Feature %1 has incorrect node ordering