#include "qwineventnotifier.h"
#include <QMutexLocker>
#include <QDebug>
#include <QRegExp>
#include "qextserialport.h"
void QextSerialPort::platformSpecificInit()
{
Win_Handle=INVALID_HANDLE_VALUE;
ZeroMemory(&overlap, sizeof(OVERLAPPED));
overlap.hEvent = CreateEvent(NULL, true, false, NULL);
winEventNotifier = 0;
bytesToWriteLock = new QReadWriteLock;
_bytesToWrite = 0;
}
/*!
Standard destructor.
*/
void QextSerialPort::platformSpecificDestruct() {
CloseHandle(overlap.hEvent);
delete bytesToWriteLock;
}
QString QextSerialPort::fullPortNameWin(const QString & name)
{
QRegExp rx("^COM(\\d+)");
QString fullName(name);
if(fullName.contains(rx)) {
int portnum = rx.cap(1).toInt();
if(portnum > 9) // COM ports greater than 9 need \\.\ prepended
fullName.prepend("\\\\.\\");
}
return fullName;
}
/*!
Opens a serial port. Note that this function does not specify which device to open. If you need
to open a device by name, see QextSerialPort::open(const char*). This function has no effect
if the port associated with the class is already open. The port is also configured to the current
settings, as stored in the Settings structure.
*/
bool QextSerialPort::open(OpenMode mode) {
unsigned long confSize = sizeof(COMMCONFIG);
Win_CommConfig.dwSize = confSize;
DWORD dwFlagsAndAttributes = 0;
if (queryMode() == QextSerialPort::EventDriven)
dwFlagsAndAttributes += FILE_FLAG_OVERLAPPED;
QMutexLocker lock(mutex);
if (mode == QIODevice::NotOpen)
return isOpen();
if (!isOpen()) {
/*open the port*/
Win_Handle=CreateFileA(port.toLatin1(), GENERIC_READ|GENERIC_WRITE,
0, NULL, OPEN_EXISTING, dwFlagsAndAttributes, NULL);
if (Win_Handle!=INVALID_HANDLE_VALUE) {
QIODevice::open(mode);
/*configure port settings*/
GetCommConfig(Win_Handle, &Win_CommConfig, &confSize);
GetCommState(Win_Handle, &(Win_CommConfig.dcb));
/*set up parameters*/
Win_CommConfig.dcb.fBinary=TRUE;
Win_CommConfig.dcb.fInX=FALSE;
Win_CommConfig.dcb.fOutX=FALSE;
Win_CommConfig.dcb.fAbortOnError=FALSE;
Win_CommConfig.dcb.fNull=FALSE;
setBaudRate(Settings.BaudRate);
setDataBits(Settings.DataBits);
setStopBits(Settings.StopBits);
setParity(Settings.Parity);
setFlowControl(Settings.FlowControl);
setTimeout(Settings.Timeout_Millisec);
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
//init event driven approach
if (queryMode() == QextSerialPort::EventDriven) {
Win_CommTimeouts.ReadIntervalTimeout = MAXDWORD;
Win_CommTimeouts.ReadTotalTimeoutMultiplier = 0;
Win_CommTimeouts.ReadTotalTimeoutConstant = 0;
Win_CommTimeouts.WriteTotalTimeoutMultiplier = 0;
Win_CommTimeouts.WriteTotalTimeoutConstant = 0;
SetCommTimeouts(Win_Handle, &Win_CommTimeouts);
if (!SetCommMask( Win_Handle, EV_TXEMPTY | EV_RXCHAR | EV_DSR)) {
qWarning() << "failed to set Comm Mask. Error code:", GetLastError();
return false;
}
winEventNotifier = new QWinEventNotifier(overlap.hEvent, this);
connect(winEventNotifier, SIGNAL(activated(HANDLE)), this, SLOT(onWinEvent(HANDLE)));
WaitCommEvent(Win_Handle, &eventMask, &overlap);
}
}
} else {
return false;
}
return isOpen();
}
/*!
Closes a serial port. This function has no effect if the serial port associated with the class
is not currently open.
*/
void QextSerialPort::close()
{
QMutexLocker lock(mutex);
if (isOpen()) {
flush();
QIODevice::close(); // mark ourselves as closed
CancelIo(Win_Handle);
if (winEventNotifier) {
winEventNotifier->setEnabled(false);
winEventNotifier->deleteLater();
winEventNotifier = 0;
}
if (CloseHandle(Win_Handle))
Win_Handle = INVALID_HANDLE_VALUE;
_bytesToWrite = 0;
if(!pendingWrites.isEmpty()) {
foreach(OVERLAPPED* o, pendingWrites) {
CloseHandle(o->hEvent);
delete o;
}
pendingWrites.clear();
}
}
}
/*!
Flushes all pending I/O to the serial port. This function has no effect if the serial port
associated with the class is not currently open.
*/
void QextSerialPort::flush() {
QMutexLocker lock(mutex);
if (isOpen()) {
FlushFileBuffers(Win_Handle);
}
}
/*!
This function will return the number of bytes waiting in the receive queue of the serial port.
It is included primarily to provide a complete QIODevice interface, and will not record errors
in the lastErr member (because it is const). This function is also not thread-safe - in
multithreading situations, use QextSerialPort::bytesAvailable() instead.
*/
qint64 QextSerialPort::size() const {
int availBytes;
COMSTAT Win_ComStat;
DWORD Win_ErrorMask=0;
ClearCommError(Win_Handle, &Win_ErrorMask, &Win_ComStat);
availBytes = Win_ComStat.cbInQue;
return (qint64)availBytes;
}
/*!
Returns the number of bytes waiting in the port's receive queue. This function will return 0 if
the port is not currently open, or -1 on error.
*/
qint64 QextSerialPort::bytesAvailable() const {
QMutexLocker lock(mutex);
if (isOpen()) {
DWORD Errors;
COMSTAT Status;
if (ClearCommError(Win_Handle, &Errors, &Status)) {
return Status.cbInQue + QIODevice::bytesAvailable();
}
return (qint64)-1;
}
return 0;
}
/*!
Translates a system-specific error code to a QextSerialPort error code. Used internally.
*/
void QextSerialPort::translateError(ulong error) {
if (error&CE_BREAK) {
lastErr=E_BREAK_CONDITION;
}
else if (error&CE_FRAME) {
lastErr=E_FRAMING_ERROR;
}
else if (error&CE_IOE) {
lastErr=E_IO_ERROR;
}
else if (error&CE_MODE) {
lastErr=E_INVALID_FD;
}
else if (error&CE_OVERRUN) {
lastErr=E_BUFFER_OVERRUN;
}
else if (error&CE_RXPARITY) {
lastErr=E_RECEIVE_PARITY_ERROR;
}
else if (error&CE_RXOVER) {
lastErr=E_RECEIVE_OVERFLOW;
}
else if (error&CE_TXFULL) {
lastErr=E_TRANSMIT_OVERFLOW;
}
}
/*!
Reads a block of data from the serial port. This function will read at most maxlen bytes from
the serial port and place them in the buffer pointed to by data. Return value is the number of
bytes actually read, or -1 on error.
\warning before calling this function ensure that serial port associated with this class
is currently open (use isOpen() function to check if port is open).
*/
qint64 QextSerialPort::readData(char *data, qint64 maxSize)
{
DWORD retVal;
QMutexLocker lock(mutex);
retVal = 0;
if (queryMode() == QextSerialPort::EventDriven) {
OVERLAPPED overlapRead;
ZeroMemory(&overlapRead, sizeof(OVERLAPPED));
if (!ReadFile(Win_Handle, (void*)data, (DWORD)maxSize, & retVal, & overlapRead)) {
if (GetLastError() == ERROR_IO_PENDING)
GetOverlappedResult(Win_Handle, & overlapRead, & retVal, true);
else {
lastErr = E_READ_FAILED;
retVal = (DWORD)-1;
}
}
} else if (!ReadFile(Win_Handle, (void*)data, (DWORD)maxSize, & retVal, NULL)) {
lastErr = E_READ_FAILED;
retVal = (DWORD)-1;
}
return (qint64)retVal;
}
/*!
Writes a block of data to the serial port. This function will write len bytes
from the buffer pointed to by data to the serial port. Return value is the number
of bytes actually written, or -1 on error.
\warning before calling this function ensure that serial port associated with this class
is currently open (use isOpen() function to check if port is open).
*/
qint64 QextSerialPort::writeData(const char *data, qint64 maxSize)
{
QMutexLocker lock( mutex );
DWORD retVal = 0;
if (queryMode() == QextSerialPort::EventDriven) {
OVERLAPPED* newOverlapWrite = new OVERLAPPED;
ZeroMemory(newOverlapWrite, sizeof(OVERLAPPED));
newOverlapWrite->hEvent = CreateEvent(NULL, true, false, NULL);
if (WriteFile(Win_Handle, (void*)data, (DWORD)maxSize, & retVal, newOverlapWrite)) {
CloseHandle(newOverlapWrite->hEvent);
delete newOverlapWrite;
}
else if (GetLastError() == ERROR_IO_PENDING) {
// writing asynchronously...not an error
QWriteLocker writelocker(bytesToWriteLock);
_bytesToWrite += maxSize;
pendingWrites.append(newOverlapWrite);
}
else {
qDebug() << "serialport write error:" << GetLastError();
lastErr = E_WRITE_FAILED;
retVal = (DWORD)-1;
if(!CancelIo(newOverlapWrite->hEvent))
qDebug() << "serialport: couldn't cancel IO";
if(!CloseHandle(newOverlapWrite->hEvent))
qDebug() << "serialport: couldn't close OVERLAPPED handle";
delete newOverlapWrite;
}
} else if (!WriteFile(Win_Handle, (void*)data, (DWORD)maxSize, & retVal, NULL)) {
lastErr = E_WRITE_FAILED;
retVal = (DWORD)-1;
}
return (qint64)retVal;
}
/*!
This function is included to implement the full QIODevice interface, and currently has no
purpose within this class. This function is meaningless on an unbuffered device and currently
only prints a warning message to that effect.
*/
void QextSerialPort::ungetChar(char c) {
/*meaningless on unbuffered sequential device - return error and print a warning*/
TTY_WARNING("QextSerialPort: ungetChar() called on an unbuffered sequential device - operation is meaningless");
}
/*!
Sets the flow control used by the port. Possible values of flow are:
\verbatim
FLOW_OFF No flow control
FLOW_HARDWARE Hardware (RTS/CTS) flow control
FLOW_XONXOFF Software (XON/XOFF) flow control
\endverbatim
*/
void QextSerialPort::setFlowControl(FlowType flow) {
QMutexLocker lock(mutex);
if (Settings.FlowControl!=flow) {
Settings.FlowControl=flow;
}
if (isOpen()) {
switch(flow) {
/*no flow control*/
case FLOW_OFF:
Win_CommConfig.dcb.fOutxCtsFlow=FALSE;
Win_CommConfig.dcb.fRtsControl=RTS_CONTROL_DISABLE;
Win_CommConfig.dcb.fInX=FALSE;
Win_CommConfig.dcb.fOutX=FALSE;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
break;
/*software (XON/XOFF) flow control*/
case FLOW_XONXOFF:
Win_CommConfig.dcb.fOutxCtsFlow=FALSE;
Win_CommConfig.dcb.fRtsControl=RTS_CONTROL_DISABLE;
Win_CommConfig.dcb.fInX=TRUE;
Win_CommConfig.dcb.fOutX=TRUE;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
break;
case FLOW_HARDWARE:
Win_CommConfig.dcb.fOutxCtsFlow=TRUE;
Win_CommConfig.dcb.fRtsControl=RTS_CONTROL_HANDSHAKE;
Win_CommConfig.dcb.fInX=FALSE;
Win_CommConfig.dcb.fOutX=FALSE;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
break;
}
}
}
/*!
Sets the parity associated with the serial port. The possible values of parity are:
\verbatim
PAR_SPACE Space Parity
PAR_MARK Mark Parity
PAR_NONE No Parity
PAR_EVEN Even Parity
PAR_ODD Odd Parity
\endverbatim
*/
void QextSerialPort::setParity(ParityType parity) {
QMutexLocker lock(mutex);
if (Settings.Parity!=parity) {
Settings.Parity=parity;
}
if (isOpen()) {
Win_CommConfig.dcb.Parity=(unsigned char)parity;
switch (parity) {
/*space parity*/
case PAR_SPACE:
if (Settings.DataBits==DATA_8) {
TTY_PORTABILITY_WARNING("QextSerialPort Portability Warning: Space parity with 8 data bits is not supported by POSIX systems.");
}
Win_CommConfig.dcb.fParity=TRUE;
break;
/*mark parity - WINDOWS ONLY*/
case PAR_MARK:
TTY_PORTABILITY_WARNING("QextSerialPort Portability Warning: Mark parity is not supported by POSIX systems");
Win_CommConfig.dcb.fParity=TRUE;
break;
/*no parity*/
case PAR_NONE:
Win_CommConfig.dcb.fParity=FALSE;
break;
/*even parity*/
case PAR_EVEN:
Win_CommConfig.dcb.fParity=TRUE;
break;
/*odd parity*/
case PAR_ODD:
Win_CommConfig.dcb.fParity=TRUE;
break;
}
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
}
/*!
Sets the number of data bits used by the serial port. Possible values of dataBits are:
\verbatim
DATA_5 5 data bits
DATA_6 6 data bits
DATA_7 7 data bits
DATA_8 8 data bits
\endverbatim
\note
This function is subject to the following restrictions:
\par
5 data bits cannot be used with 2 stop bits.
\par
1.5 stop bits can only be used with 5 data bits.
\par
8 data bits cannot be used with space parity on POSIX systems.
*/
void QextSerialPort::setDataBits(DataBitsType dataBits) {
QMutexLocker lock(mutex);
if (Settings.DataBits!=dataBits) {
if ((Settings.StopBits==STOP_2 && dataBits==DATA_5) ||
(Settings.StopBits==STOP_1_5 && dataBits!=DATA_5)) {
}
else {
Settings.DataBits=dataBits;
}
}
if (isOpen()) {
switch(dataBits) {
/*5 data bits*/
case DATA_5:
if (Settings.StopBits==STOP_2) {
TTY_WARNING("QextSerialPort: 5 Data bits cannot be used with 2 stop bits.");
}
else {
Win_CommConfig.dcb.ByteSize=5;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
/*6 data bits*/
case DATA_6:
if (Settings.StopBits==STOP_1_5) {
TTY_WARNING("QextSerialPort: 6 Data bits cannot be used with 1.5 stop bits.");
}
else {
Win_CommConfig.dcb.ByteSize=6;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
/*7 data bits*/
case DATA_7:
if (Settings.StopBits==STOP_1_5) {
TTY_WARNING("QextSerialPort: 7 Data bits cannot be used with 1.5 stop bits.");
}
else {
Win_CommConfig.dcb.ByteSize=7;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
/*8 data bits*/
case DATA_8:
if (Settings.StopBits==STOP_1_5) {
TTY_WARNING("QextSerialPort: 8 Data bits cannot be used with 1.5 stop bits.");
}
else {
Win_CommConfig.dcb.ByteSize=8;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
}
}
}
/*!
Sets the number of stop bits used by the serial port. Possible values of stopBits are:
\verbatim
STOP_1 1 stop bit
STOP_1_5 1.5 stop bits
STOP_2 2 stop bits
\endverbatim
\note
This function is subject to the following restrictions:
\par
2 stop bits cannot be used with 5 data bits.
\par
1.5 stop bits cannot be used with 6 or more data bits.
\par
POSIX does not support 1.5 stop bits.
*/
void QextSerialPort::setStopBits(StopBitsType stopBits) {
QMutexLocker lock(mutex);
if (Settings.StopBits!=stopBits) {
if ((Settings.DataBits==DATA_5 && stopBits==STOP_2) ||
(stopBits==STOP_1_5 && Settings.DataBits!=DATA_5)) {
}
else {
Settings.StopBits=stopBits;
}
}
if (isOpen()) {
switch (stopBits) {
/*one stop bit*/
case STOP_1:
Win_CommConfig.dcb.StopBits=ONESTOPBIT;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
break;
/*1.5 stop bits*/
case STOP_1_5:
TTY_PORTABILITY_WARNING("QextSerialPort Portability Warning: 1.5 stop bit operation is not supported by POSIX.");
if (Settings.DataBits!=DATA_5) {
TTY_WARNING("QextSerialPort: 1.5 stop bits can only be used with 5 data bits");
}
else {
Win_CommConfig.dcb.StopBits=ONE5STOPBITS;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
/*two stop bits*/
case STOP_2:
if (Settings.DataBits==DATA_5) {
TTY_WARNING("QextSerialPort: 2 stop bits cannot be used with 5 data bits");
}
else {
Win_CommConfig.dcb.StopBits=TWOSTOPBITS;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
}
}
}
/*!
Sets the baud rate of the serial port. Note that not all rates are applicable on
all platforms. The following table shows translations of the various baud rate
constants on Windows(including NT/2000) and POSIX platforms. Speeds marked with an *
are speeds that are usable on both Windows and POSIX.
\verbatim
RATE Windows Speed POSIX Speed
----------- ------------- -----------
BAUD50 110 50
BAUD75 110 75
*BAUD110 110 110
BAUD134 110 134.5
BAUD150 110 150
BAUD200 110 200
*BAUD300 300 300
*BAUD600 600 600
*BAUD1200 1200 1200
BAUD1800 1200 1800
*BAUD2400 2400 2400
*BAUD4800 4800 4800
*BAUD9600 9600 9600
BAUD14400 14400 9600
*BAUD19200 19200 19200
*BAUD38400 38400 38400
BAUD56000 56000 38400
*BAUD57600 57600 57600
BAUD76800 57600 76800
*BAUD115200 115200 115200
BAUD128000 128000 115200
BAUD256000 256000 115200
\endverbatim
*/
void QextSerialPort::setBaudRate(BaudRateType baudRate) {
QMutexLocker lock(mutex);
if (Settings.BaudRate!=baudRate) {
switch (baudRate) {
case BAUD50:
case BAUD75:
case BAUD134:
case BAUD150:
case BAUD200:
Settings.BaudRate=BAUD110;
break;
case BAUD1800:
Settings.BaudRate=BAUD1200;
break;
case BAUD76800:
Settings.BaudRate=BAUD57600;
break;
default:
Settings.BaudRate=baudRate;
break;
}
}
if (isOpen()) {
switch (baudRate) {
/*50 baud*/
case BAUD50:
TTY_WARNING("QextSerialPort: Windows does not support 50 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*75 baud*/
case BAUD75:
TTY_WARNING("QextSerialPort: Windows does not support 75 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*110 baud*/
case BAUD110:
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*134.5 baud*/
case BAUD134:
TTY_WARNING("QextSerialPort: Windows does not support 134.5 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*150 baud*/
case BAUD150:
TTY_WARNING("QextSerialPort: Windows does not support 150 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*200 baud*/
case BAUD200:
TTY_WARNING("QextSerialPort: Windows does not support 200 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*300 baud*/
case BAUD300:
Win_CommConfig.dcb.BaudRate=CBR_300;
break;
/*600 baud*/
case BAUD600:
Win_CommConfig.dcb.BaudRate=CBR_600;
break;
/*1200 baud*/
case BAUD1200:
Win_CommConfig.dcb.BaudRate=CBR_1200;
break;
/*1800 baud*/
case BAUD1800:
TTY_WARNING("QextSerialPort: Windows does not support 1800 baud operation. Switching to 1200 baud.");
Win_CommConfig.dcb.BaudRate=CBR_1200;
break;
/*2400 baud*/
case BAUD2400:
Win_CommConfig.dcb.BaudRate=CBR_2400;
break;
/*4800 baud*/
case BAUD4800:
Win_CommConfig.dcb.BaudRate=CBR_4800;
break;
/*9600 baud*/
case BAUD9600:
Win_CommConfig.dcb.BaudRate=CBR_9600;
break;
/*14400 baud*/
case BAUD14400:
TTY_PORTABILITY_WARNING("QextSerialPort Portability Warning: POSIX does not support 14400 baud operation.");
Win_CommConfig.dcb.BaudRate=CBR_14400;
break;
/*19200 baud*/
case BAUD19200:
Win_CommConfig.dcb.BaudRate=CBR_19200;
break;
/*38400 baud*/
case BAUD38400:
Win_CommConfig.dcb.BaudRate=CBR_38400;
break;
/*56000 baud*/
case BAUD56000:
TTY_PORTABILITY_WARNING("QextSerialPort Portability Warning: POSIX does not support 56000 baud operation.");
Win_CommConfig.dcb.BaudRate=CBR_56000;
break;
/*57600 baud*/
case BAUD57600:
Win_CommConfig.dcb.BaudRate=CBR_57600;
break;
/*76800 baud*/
case BAUD76800:
TTY_WARNING("QextSerialPort: Windows does not support 76800 baud operation. Switching to 57600 baud.");
Win_CommConfig.dcb.BaudRate=CBR_57600;
break;
/*115200 baud*/
case BAUD115200:
Win_CommConfig.dcb.BaudRate=CBR_115200;
break;
/*128000 baud*/
case BAUD128000:
TTY_PORTABILITY_WARNING("QextSerialPort Portability Warning: POSIX does not support 128000 baud operation.");
Win_CommConfig.dcb.BaudRate=CBR_128000;
break;
/*256000 baud*/
case BAUD256000:
TTY_PORTABILITY_WARNING("QextSerialPort Portability Warning: POSIX does not support 256000 baud operation.");
Win_CommConfig.dcb.BaudRate=CBR_256000;
break;
}
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
}
/*!
Sets DTR line to the requested state (high by default). This function will have no effect if
the port associated with the class is not currently open.
*/
void QextSerialPort::setDtr(bool set) {
QMutexLocker lock(mutex);
if (isOpen()) {
if (set) {
EscapeCommFunction(Win_Handle, SETDTR);
}
else {
EscapeCommFunction(Win_Handle, CLRDTR);
}
}
}
/*!
Sets RTS line to the requested state (high by default). This function will have no effect if
the port associated with the class is not currently open.
*/
void QextSerialPort::setRts(bool set) {
QMutexLocker lock(mutex);
if (isOpen()) {
if (set) {
EscapeCommFunction(Win_Handle, SETRTS);
}
else {
EscapeCommFunction(Win_Handle, CLRRTS);
}
}
}
/*!
Returns the line status as stored by the port function. This function will retrieve the states
of the following lines: DCD, CTS, DSR, and RI. On POSIX systems, the following additional lines
can be monitored: DTR, RTS, Secondary TXD, and Secondary RXD. The value returned is an unsigned
long with specific bits indicating which lines are high. The following constants should be used
to examine the states of individual lines:
\verbatim
Mask Line
------ ----
LS_CTS CTS
LS_DSR DSR
LS_DCD DCD
LS_RI RI
\endverbatim
This function will return 0 if the port associated with the class is not currently open.
*/
ulong QextSerialPort::lineStatus(void) {
unsigned long Status=0, Temp=0;
QMutexLocker lock(mutex);
if (isOpen()) {
GetCommModemStatus(Win_Handle, &Temp);
if (Temp&MS_CTS_ON) {
Status|=LS_CTS;
}
if (Temp&MS_DSR_ON) {
Status|=LS_DSR;
}
if (Temp&MS_RING_ON) {
Status|=LS_RI;
}
if (Temp&MS_RLSD_ON) {
Status|=LS_DCD;
}
}
return Status;
}
bool QextSerialPort::waitForReadyRead(int msecs)
{
//@todo implement
return false;
}
qint64 QextSerialPort::bytesToWrite() const
{
QReadLocker rl(bytesToWriteLock);
return _bytesToWrite;
}
/*
Triggered when there's activity on our HANDLE.
*/
void QextSerialPort::onWinEvent(HANDLE h)
{
QMutexLocker lock(mutex);
if(h == overlap.hEvent) {
if (eventMask & EV_RXCHAR) {
if (sender() != this && bytesAvailable() > 0)
emit readyRead();
}
if (eventMask & EV_TXEMPTY) {
/*
A write completed. Run through the list of OVERLAPPED writes, and if
they completed successfully, take them off the list and delete them.
Otherwise, leave them on there so they can finish.
*/
qint64 totalBytesWritten = 0;
QList<OVERLAPPED*> overlapsToDelete;
foreach(OVERLAPPED* o, pendingWrites) {
DWORD numBytes = 0;
if (GetOverlappedResult(Win_Handle, o, & numBytes, false)) {
overlapsToDelete.append(o);
totalBytesWritten += numBytes;
} else if( GetLastError() != ERROR_IO_INCOMPLETE ) {
overlapsToDelete.append(o);
qWarning() << "CommEvent overlapped write error:" << GetLastError();
}
}
if (sender() != this && totalBytesWritten > 0) {
QWriteLocker writelocker(bytesToWriteLock);
emit bytesWritten(totalBytesWritten);
_bytesToWrite = 0;
}
foreach(OVERLAPPED* o, overlapsToDelete) {
OVERLAPPED *toDelete = pendingWrites.takeAt(pendingWrites.indexOf(o));
CloseHandle(toDelete->hEvent);
delete toDelete;
}
}
if (eventMask & EV_DSR) {
if (lineStatus() & LS_DSR)
emit dsrChanged(true);
else
emit dsrChanged(false);
}
}
WaitCommEvent(Win_Handle, &eventMask, &overlap);
}
/*!
Sets the read and write timeouts for the port to millisec milliseconds.
Setting 0 indicates that timeouts are not used for read nor write operations;
however read() and write() functions will still block. Set -1 to provide
non-blocking behavior (read() and write() will return immediately).
\note this function does nothing in event driven mode.
*/
void QextSerialPort::setTimeout(long millisec) {
QMutexLocker lock(mutex);
Settings.Timeout_Millisec = millisec;
if (millisec == -1) {
Win_CommTimeouts.ReadIntervalTimeout = MAXDWORD;
Win_CommTimeouts.ReadTotalTimeoutConstant = 0;
} else {
Win_CommTimeouts.ReadIntervalTimeout = millisec;
Win_CommTimeouts.ReadTotalTimeoutConstant = millisec;
}
Win_CommTimeouts.ReadTotalTimeoutMultiplier = 0;
Win_CommTimeouts.WriteTotalTimeoutMultiplier = millisec;
Win_CommTimeouts.WriteTotalTimeoutConstant = 0;
if (queryMode() != QextSerialPort::EventDriven)
SetCommTimeouts(Win_Handle, &Win_CommTimeouts);
}