&Geoprocessing @default OGR Driver Manager OGR Driver Manager unable to get OGRDriverManager imposibil de accesat OGRDriverManager Open an OGR Supported Vector Layer Deschide un strat accesat de OGR is not a valid or recognized data source nu este o sursa accesibila Invalid Data Source Sursa de date corupta Invalid Layer Layer corupt %1 is an invalid layer and cannot be loaded. %1 este un layer corupt si nu poate fi accesat. Save As Salvare Ca Choose a QGIS project file to open Alegeţi un fisier de proiect QGIS QGIS Project Read Error Eroare de citire a fisierului proiect Try to find missing layers? inceracti sa gasiti straturi disparute? Unable to open project Imposibil de citit proiectul Choose a QGIS project file Alegeţi un fisier de proiect QGIS Saved project to: Proiect salvat in: Unable to save project Imposibil de salvat proiectul Unable to save project to Imposibil de salvat proiectul in Unable to save project Imposibil de salvat proiectul Choose a filename to save the QGIS project file as Alegeţi un nume sub care să salvaţi proiectul QGIS: Unable to load project QGIS: Imposibil de citit proiectul Unable to load project Imposibil de citit proiectul Saved map image to Harta salvata in: No Layer Selected Nu există nici un layer selectat To delete features, you must select a vector layer in the legend Pentru a sterge obiecte, trebuie ales un layer activ apăsînd pe numele lui în legendă No Vector Layer Selected Nu este selectat nici un layer tip vector Deleting features only works on vector layers Stergerea de obiecte este posibila doar pentru straturi tip vector Provider does not support deletion Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Data provider does not support deleting features Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Layer not editable Layerul nu este editabil The current layer is not editable. Choose 'Start editing' in the digitizing toolbar. Layerul curent nu este editabil. Apasati 'Permisiune de Editare' in bara de unelte pentru vectorizare. Problem deleting features A apruta o problema la stergerea de obiecte A problem occured during deletion of features A apruta o problema la stergerea de obiecte Error Loading Plugin Eroare la incarcare plugin-uri There was an error loading %1. Eroare la incarcarea %1. No MapLayer Plugins Nu există Plugin-uri pentru Straturi Harta No MapLayer plugins in ../plugins/maplayer Nu există Plugin-uri pentru Straturi Harta in ../plugins/maplayer No Plugins Nu există Plugin-uri No plugins found in ../plugins. To test plugins, start qgis from the src directory Nu există Plugin-uri in ../plugins. Pentru a le putea testa, porniti QGIS din directorul sursa (src). Name Nume Plugin %1 is named %2 Pluginul %1 se numeste %2 Plugin Information Informatii plugin QGis loaded the following plugin: QGIS a incarcat dinamic urmatorul plugin: Name: %1 Nume: %1 Version: %1 Versiune: %1 Description: %1 Descriere: %1 Unable to Load Plugin Nu se poate incarca acest plugin QGIS was unable to load the plugin from: %1 QGIS nu a putut incarca dinamic acest plugin din: %1 There is a new version of QGIS available O noua versiune QGIS este disponibila You are running a development version of QGIS Rulati o versiune QGIS pentru dezvoltatori You are running the current version of QGIS Felicitari. Rulati cea mai recenta versiune QGIS. Would you like more information? Ati dori mai multe informatii? QGIS - Changes in SVN Since Last Release Modificari QGIS de la utima versiune Unable to get current version information from server Nu se poate obtine legatura cu serverul de informatii Connection refused - server may be down Conexiune refuzata - serverul poate fi inactiv QGIS server was not found Serverul QGIS nu este disponibil QGIS Browser Selection Selectarea Browser-ului pentru QGIS Enter the name of a web browser to use (eg. konqueror). Introduceti numele browser-ului de Internet (de exemplu konqueror). Enter the full path if the browser is not in your PATH. Introduceti calea absoluta, daca aplicatia nu se afla in variabila de system PATH You can change this option later by selecting Options from the Settings menu (Help Browser tab). Puteti modifica aceasta optiune mai tarziu selectand Optiuni din meniul de setari. Layer is not valid Layer corupt The layer is not a valid layer and can not be added to the map Stratul tematic este corupt si nu poate fi adaugat in harta. Save? Salvare? Extents: Dimensiuni: Clipboard contents set to: Continutul clipboardului setat cu: Open a GDAL Supported Raster Data Source Deschide un strat tematic tip raster accesat de GDAL is not a valid or recognized raster data source nu este o sursa raster valida is not a supported raster data source nu este o sursa raster accesibila Unsupported Data Source Sursa de Date nu este suportata de QGIS New Bookmark Bookmark Nou Enter a name for the new bookmark: Introduceţi numele noului bookmark: Error Eroare Unable to create the bookmark. Your user database may be missing or corrupted Nu se poate crea acest bookmark. BeataDialog Move selected to top Mutaţi elementele selectate deasupra Invert selection Inversaţi selecţia Search string parsing error Eroarea la analizarea criteriului de căutare Search results Căutare în rezultate You've supplied an empty search string. Nu aţi introdus criteriul de căutare. Error during search Eroare la căutare Found %d matching features. No matching features found. Nu au fost găsite caracteristici corespunzătoare. BeataDialogGui Search Căutare in în Attribute Table Tabela de atribute Remove selection Înlăturaţi selecţia Move selected to top Mutaţi elementele selectate deasupra Ctrl+T Ctrl+T Invert selection Inversaţi selecţia Copy selected rows to clipboard (Ctrl+C) Copiaţi liniile selectate (Ctrl+C) Copies the selected rows to the clipboard Copiază liniile selectate Ctrl+C Ctrl+C Ctrl+J Ctrl+J Măsurare suprafaţă ... ... CoordinateCapture Coordinate Capture Click on the map to view coordinates and capture to clipboard. &Coordinate Capture Click to select the CRS to use for coordinate display Coordinate in your selected CRS Coordinate in map canvas coordinate reference system Copy to clipboard Click to enable mouse tracking. Click the canvas to stop Start capture Click to enable coordinate capture CoordinateCaptureGui Coordinate Capture Plugin CoordinateCaptureGuiBase QGIS Plugin Template Matriţă pentru QGIS Plugin Plugin Template Matriţă Plugin Dialog Name Nume Version Versiune Description Descriere: Add Adauga Edit Editare Delete Ştergere Size Dimensiuni ... ... Connect Conectare Browse Selectaţi OGR Converter Open OGR file OGR File Data Source (*.*) Open Directory Input OGR dataset is missing! Input OGR layer name is missing! Target OGR format not selected! Output OGR dataset is missing! Output OGR layer name is missing! Choose a file name to save to Could not establish connection to: '%1' Successfully translated layer '%1' Failed to translate layer '%1' Successfully connected to: '%1' fTools About fTools Version x.x-xxxxxx <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> </body></html> Help Ajutor Web Close Închidere Extract Nodes Input line or polygon vector layer Tolerance Unique ID field Output point shapefile Geoprocessing Input vector layer Intersect layer Buffer distance Buffer distance field Dissolve field Dissolve buffer results Output shapefile Locate Line Intersections Input line layer Input unique ID field Intersect line layer Intersect unique ID field Output Shapefile Join Attributes Target vector layer Target join field Join data Join vector layer Join dbf table Join field Output table Only keep matching records Keep all records (includeing non-matching target records) Generate Centroids Weight field Number of standard deviations Std. Dev. Create Distance Matrix Input point layer Target point layer Target unique ID field Output matrix type Linear (N*k x 3) distance matrix Standard (N x T) distance matrix Summary distance matrix (mean, std. dev., min, max) Use only the nearest (k) target points: Output distance matrix Count Points In Polygons Input polygon vector layer Input point vector layer Output count field name PNTCNT Generate Random Points Input Boundary Layer Minimum distance between points Sample Size Unstratified Sampling Design (Entire layer) Use this number of points Stratified Sampling Design (Individual polygons) Use this density of points Use value from input field Random Selection Tool Input Vector Layer Randomly Select Number of Features Percentage of Features % Projection Management Tool Input spatial reference system Output spatial reference system Use predefined spatial reference system Choose Import spatial reference system from existing layer Import spatial reference system: Generate Regular Points Input Coordinates X Min Y Min X Max Y Max Grid Spacing Use this point spacing Apply random offset to point spacing Initial inset from corner (LH side) Spatial Join Attribute Summary Take attributes of first located feature Take summary of intersecting features Mean Media Min Min Max Max Sum Output Shapefile: Random Selection From Within Subsets Input subset field (unique ID field) Sum Line Length In Polygons Output summed length field name LENGTH Input line vector layer Grid extent Update extents from layer Update extents from canvas Parameters X Lock 1:1 ratio Y Output grid as polygons Output grid as lines Vector Split Output folder List Unique Values Target field Unique values list Unique value count Geoprocessing Exit Iesire 0.0 0.0 Browse Selectaţi Gui Welcome to your automatically generated plugin! This is just a starting point. You now need to modify the code to make it do something useful....read on for a more information to get yourself started. Documentation: You really need to read the QGIS API Documentation now at: In particular look at the following classes: QgsPlugin is an ABC that defines required behaviour your plugin must provide. See below for more details. What are all the files in my generated plugin directory for? This is the generated CMake file that builds the plugin. You should add you application specific dependencies and source files to this file. This is the class that provides the 'glue' between your custom application logic and the QGIS application. You will see that a number of methods are already implemented for you - including some examples of how to add a raster or vector layer to the main application map canvas. This class is a concrete instance of the QgisPlugin interface which defines required behaviour for a plugin. In particular, a plugin has a number of static methods and members so that the QgsPluginManager and plugin loader logic can identify each plugin, create an appropriate menu entry for it etc. Note there is nothing stopping you creating multiple toolbar icons and menu entries for a single plugin. By default though a single menu entry and toolbar button is created and its pre-configured to call the run() method in this class when selected. This default implementation provided for you by the plugin builder is well documented, so please refer to the code for further advice. This is a Qt designer 'ui' file. It defines the look of the default plugin dialog without implementing any application logic. You can modify this form to suite your needs or completely remove it if your plugin does not need to display a user form (e.g. for custom MapTools). This is the concrete class where application logic for the above mentioned dialog should go. The world is your oyster here really.... This is the Qt4 resources file for your plugin. The Makefile generated for your plugin is all set up to compile the resource file so all you need to do is add your additional icons etc using the simple xml file format. Note the namespace used for all your resources e.g. (':/Homann/'). It is important to use this prefix for all your resources. We suggest you include any other images and run time data in this resurce file too. This is the icon that will be used for your plugin menu entry and toolbar icon. Simply replace this icon with your own icon to make your plugin disctinctive from the rest. This file contains the documentation you are reading now! Getting developer help: For Questions and Comments regarding the plugin builder template and creating your features in QGIS using the plugin interface please contact us via: <li> the QGIS developers mailing list, or </li><li> IRC (#qgis on freenode.net)</li> QGIS is distributed under the Gnu Public License. If you create a useful plugin please consider contributing it back to the community. Have fun and thank you for choosing QGIS. KDChartParams Legend Legendă Square Pătrat Diamond Romb Circle Cerc One pixel Un pixel Four pixels Patru pixeli Ring Inel Cross Cruce fast Cross Cruce rapidă MapCoordsDialogBase Enter map coordinates Introduceţi coordonatele hărţii X: X: Y: Y: &OK &OK &Cancel &Renunţă Enter X and Y coordinates which correspond with the selected point on the image. Alternatively, click the button with icon of a pencil and then click a corresponding point on map canvas of QGIS to fill in coordinates of that point. from map canvas NavigationGui ... ... Stop Opreste Status Starea actuala &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C NewPostgisLayer Delete Ştergere Edit Editare New Noua Connect Conectare Help Ajutor F1 F1 Ok Ok OgrConverterGuiBase OGR Layer Converter Source Format File Fişier Directory Remote source Dataset Browse Selectaţi Layer Target OgrPlugin Run OGR Layer Converter Replace this with a short description of the what the plugin does A se înlocui cu o scurtă descriere a functionalitatii acestui plugin OG&R Converter Translates vector layers between formats supported by OGR library OracleConnectGuiBase Create Oracle Connection OK Cancel Connection Information Informaţii conexiune Name Nume Database instance Username Nume Utilizator (Login) Password Parola Name of the new connection Numele conexiunii noi Save Password QFileDialog Save experiment report to portable document format (.pdf) Load layer properties from style file (.qml) Save layer properties as style file (.qml) QObject Series Serii Item Element Value Valoare Caught a coordinate system exception while trying to transform a point. Unable to calculate line length. Eroare interceptată în sistemul de coordonate la transformarea unui punct. Nu a fost posibilă calcularea lungimii liniei. Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area. Eroare interceptată în sistemul de coordonate la transformarea unui punct. Nu a fost posibilă calcularea ariei poligonului. Label Etichetă No Data Provider Plugins No QGIS data provider plugins found in: Nu există Plugin-uri pentru accesarea datelor Nu a fost găsit nici un Plugin pentru accesarea de date QGIS în No vector layers can be loaded. Check your QGIS installation Nu a putut fi încărcat nici un layer vectorial. Verificaţi instalarea QGIS No Data Providers Nici un furnizor de date No data provider plugins are available. No vector layers can be loaded Nu este disponibil nici un Plugin pentru accesarea de date. Nu a putut fi încărcat nici un layer vectorial Regular expressions on numeric values don't make sense. Use comparison insted. Operaţiile logice nu au sens pentru valori numerice. Utilizaţi comparaţii. Referenced column wasn't found: Coloana respectivă nu afost gasită: Division by zero. Împărţire la zero. Open an OGR Supported Layer Deschide un layer OGR QGis files (*.qgs) Fişiere QGIS (*.qgs) No active layer Nu există nici un layer activat To identify features, you must choose an layer active by clicking on its name in the legend Pentru a putea indetifica obiecte, trebuie ales un layer activ apăsînd pe numele lui în legendă Band Bandă Length Lungime Area Suprafaţă action acţiune features found obiecte găsite 1 feature found 1 obiect găsit No features found Nici un obiect nu a fost găsit No features were found in the active layer at the point you clicked Nici un obiect nu a fost găsit in stratul activ, în punctul selectat Could not identify objects on Nu s-a putut identifica obiecte în because deoarece To select features, you must choose an layer active by clicking on its name in the legend Pentru a putea selecta obiecte, trebuie ales un layer activ apăsînd pe numele lui în legendă Could not snap segment. Have you set the tolerance in Settings > Project Properties > General? Nu s-a putut potrivi segmentul. Verificati toleranţa din Setari > Opţiuni Proiect > General? Could not snap vertex. Have you set the tolerance in Settings > Project Properties > General? Nu s-a putut potrivi vertexul. Verificati toleranţa din Setari > Opţiuni Proiect > General? Project file read error: Eroare la citire fişier proiect: at line la linia column coloana for file pentru fisierul Unable to save to file Nu se poate salva în fişier Fit to a linear transform requires at least 2 points. Pentru o transformare liniară este nevoie de cel puţin 2 puncte. Fit to a Helmert transform requires at least 2 points. Pentru o transformare Helmert este nevoie de cel puţin 2 puncte. Fit to an affine transform requires at least 4 points. Pentru o transformare afină este nevoie de cel puţin 4 puncte. New centroid Centroid nou New point Punct nou New vertex Vertex nou Undo last point Înapoi la starea anterioară Close line Închide linia Select vertex Selectează vertex Select new position Selectează poziţie nouă Select line segment Selectează segment New vertex position Poziţie vertex nouă Release Lasă Liber Delete vertex Sterge Vertex Release vertex Lasă vertexul liber Select element Selectează element New location Locaţie nouă Release selected Lăsare liber este selectat Delete selected / select next Stergere este selectat Select position on line Selectează poziţia pe linie Split the line Împarte linia Release the line Lăsare liberă a liniei Select point on line Selectează punct pe linie Couldn't open the data source: Nu s-a putut accesa sursa de date: Parse error at line Eroare de parsare la linia GPS eXchange format provider Furnizor date pentru formatul GPS eXchange GRASS plugin Plugin GRASS QGIS couldn't find your GRASS installation. Would you like to specify path (GISBASE) to your GRASS installation? QGIS nu a găsit instalarea GRASS. Doriţi să specificaţi calea (GISBASE) către instalarea GRASS? Choose GRASS installation path (GISBASE) Alegeţi calea către instalarea GRASS (GISBASE) GRASS data won't be available if GISBASE is not specified. Datele GRASS nu vor fi disponibile dacă nu specificaţi calea (GISBASE) către instalarea GRASS. CopyrightLabel Draws copyright information Version 0.1 Version 0.2 Loads and displays delimited text files containing x,y coordinates Add Delimited Text Layer GPS Tools Tools for loading and importing GPS data GRASS GRASS layer NorthArrow Displays a north arrow overlayed onto the map [menuitemname] [plugindescription] ScaleBar Draws a scale bar SPIT Shapefile to PostgreSQL/PostGIS Import Tool WFS plugin Adds WFS layers to the QGIS canvas Layer cannot be added to Stratul nu poate fi adaugat la The data provider for this layer does not support the addition of features. Furnizorul de date corespunzator acestui layer nu suporta adaugarea de obiecte. Layer not editable Layerul nu este editabil Python error Error Eroare km2 ha m2 m km mm cm sq mile sq ft mile foot feet sq.deg. degree degrees unknown Regular expressions on numeric values don't make sense. Use comparison instead. Geoprocessing functions for working with PostgreSQL/PostGIS layers Raster Cannot open raster header Rows Columns N-S resolution E-W resolution North South East West Format Minimum value Maximum value Data source Data description Comments Categories Vector Points Lines Boundaries Centroids Faces Kernels Areas Islands Top Bottom yes no History Layer Features Driver Database Baza de date Table Key column GISBASE is not set. Mapset is already in use. Warning Atenţie Cannot read raster map region Cannot read vector map region Cannot read region PostgreSQL Geoprocessing Quick Print Quick Print is a plugin to quickly print a map with minimal effort. Abort Renunta Uncatched fatal GRASS error Couldn't load SIP module. Python support will be disabled. Couldn't load PyQt4. Couldn't load PyQGIS. An error has occured while executing Python code: Python version: Python path: An error occured during execution of following code: Legend Legendă Coordinate Capture Capture mouse coordinates in different CRS Dxf2Shp Converter Converts from dxf to shp file format Interpolating... Interpolation plugin A plugin for interpolation based on vertices of a vector layer Version 0.001 OGR Layer Converter Translates vector layers between formats supported by OGR library Error Loading Plugin Eroare la incarcare plugin-uri There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue: %1. Where is '%1' (original location: %2)? Error when reading metadata of plugin %1 No QGIS data provider plugins found in: %1 Referenced column wasn't found: %1 Location: %1 Location: %1 Mapset: %2 Couldn't open the data source: %1 Parse error at line %1 : %2 %1 is not a GRASS mapset. Cannot start %1/etc/lock Temporary directory %1 exists but is not writable Cannot create temporary directory %1 Cannot create %1 Cannot remove mapset lock: %1 Couldn't load plugin %1 %1 due an error when calling its classFactory() method %1 due an error when calling its initGui() method Error while unloading plugin %1 Georeferencer GDAL Adding projection info to rasters using GDAL SQLite DB (*.sqlite);;All files (*.*) Oracle Spatial GeoRaster Access Oracle Spatial GeoRaster QgisApp Quantum GIS - Quantum GIS - Checking database Verificare a bazei de date Reading settings Setări de citire Setting up the GUI Setare GUI Restoring loaded plugins Reincarcare plugin-uri Initializing file filters Initializare filtre pentru fisiere Restoring window state Reincarcare fereastra QGIS Ready! QGIS este pregatit pentru utilizare! &New Project Proiect &Nou Ctrl+N New Project Ctrl+N Proiect Nou New Project Proiect Nou &Open Project... &Deschide Proiect... Ctrl+O Open a Project Ctrl+O Deschide Proiect Open a Project Deschide Proiect &Save Project &Salvare Proiect Ctrl+S Save Project Ctrl+S Salvare Proiect Save Project Salvare Proiect Save Project &As... Sal&vare Proiect ca... Ctrl+A Save Project under a new name Ctrl+A Salvare Proiect sub un nume nou Save Project under a new name Salvare Proiect sub un nume nou &Print... &Imprimare... Ctrl+P Print Ctrl+P Imprimare Print Ctrl+P Save as Image... Salvare ca imagine... Ctrl+I Save map as image Ctrl+I Salvare hartă ca imagine Save map as image Salvare hartă ca imagine Export to MapServer Map... Exportare pentru MapServer... M Export as MapServer .map file M Exportare fisier .map pentru MapServer Export as MapServer .map file Exportare fisier .map pentru MapServer Exit Iesire Ctrl+Q Exit QGIS Ctrl+Q Iesire din QGIS Exit QGIS Iesire din QGIS Add a Vector Layer... Adaugă layer tip Vector... V Add a Vector Layer V Adaugă layer tip Vector Add a Vector Layer Adaugă layer tip Vector Add a Raster Layer... Adaugă layer tip Raster... R Add a Raster Layer R Adaugă layer tip Raster Add a Raster Layer Adaugă layer tip Raster Add a PostGIS Layer... Adaugă layer tip PostGIS... D Add a PostGIS Layer D Adaugă layer tip PostGIS Add a PostGIS Layer Adaugă layer tip PostGIS New Vector Layer... Crează un nou layer tip Vector... N Create a New Vector Layer N Crează un nou layer tip Vector Create a New Vector Layer Crează un nou layer tip Vector Remove Layer Îndepărtează Layer Ctrl+D Remove a Layer Ctrl+D Îndepărtează Layer Remove a Layer Îndepărtează Layer Add All To Overview Adaugă tot în Zona de Previzualizare + Show all layers in the overview map + Adaugă toate straturile tematice în Zona de Previzualizare Show all layers in the overview map Adaugă toate straturile tematice în Zona de Previzualizare Remove All From Overview Elimină toate straturile tematice din Zona de Previzualizare - Remove all layers from overview map - Elimină toate straturile tematice din Zona de Previzualizare Remove all layers from overview map Elimină toate straturile tematice din Zona de Previzualizare Show All Layers Arată toate straturile tematice S Show all layers S Arată toate straturile tematice Show all layers Arată toate straturile tematice Hide All Layers Ascunde toate straturile tematice H Hide all layers H Ascunde toate straturile tematice Hide all layers Ascunde toate straturile tematice Project Properties... Opţiuni Proiect... P Set project properties P Setaţi Opţiuni Proiect Set project properties Setaţi Opţiuni Proiect Options... Opţiuni... Change various QGIS options Schimbaţi diverse opţiuni QGIS Custom Projection... Proiecţie Customizată... Manage custom projections Administrare Proiecţii Customizate Help Contents Ajutor conţinut Ctrl+? Help Documentation (Mac) Ctrl+? Documentaţie (Mac) F1 Help Documentation F1 Help Documentation Documentaţie Qgis Home Page Pagina QGIS Home Ctrl+H QGIS Home Page Ctrl+H Pagina QGIS Home QGIS Home Page Pagina QGIS Home About Despre About QGIS Despre Quantum GIS Check Qgis Version Versiunea QGIS Check if your QGIS version is up to date (requires internet access) Verificaţi dacă Versiunea dvs. QGIS este cea mai recentă (este nevoie de access la Internet) Refresh Actualizează Ctrl+R Refresh Map Ctrl+R Actualizează Refresh Map Actualizează Harta Zoom In Apropiere Ctrl++ Zoom In Ctrl++ Apropiere Zoom Out Depărtare Ctrl+- Zoom Out Ctrl+- Depărtare Zoom Full Vedere de ansamblu F Zoom to Full Extents F Vedere de ansamblu Zoom to Full Extents Vedere de ansamblu Zoom To Selection Apropiere de Selecţie Ctrl+F Zoom to selection Ctrl+F Apropiere de Selecţie Zoom to selection Apropiere de Selecţie Pan Map Mişcare hartă Pan the map Mişcare hartă Zoom Last Înapoi la ultimul nivel de zoom Zoom to Last Extent Înapoi la ultimul nivel de zoom Zoom To Layer Focusare pe Layer Zoom to Layer Focusare pe Layer Identify Features Identifică obiecte I Click on features to identify them I Faceţi click pe obiecte pentru a le identifica Click on features to identify them Faceţi click pe obiecte pentru a le identifica Select Features Selectaţi Obiecte Open Table Deschide tabela de atribute Measure Line Măsurare distanţe liniare Ctrl+M Measure a Line Ctrl+M Măsurare distanţe liniare Measure a Line Măsurare distanţe liniare Measure Area Măsurare suprafaţă Ctrl+J Measure an Area Ctrl+J Măsurare suprafaţă Measure an Area Măsurare suprafaţă Show Bookmarks Arată bookmark-uri B Show Bookmarks B Arată bookmark-uri Show most toolbars Arată barele de unelte S Show most toolbars S Arată barele de unelte Hide most toolbars Ascunde barele de unelte H Hide most toolbars H Ascunde barele de unelte New Bookmark... Bookmark Nou... Ctrl+B New Bookmark Ctrl+BBookmark Nou New Bookmark Bookmark Nou Add WMS Layer... Adăugare layer WMS W Add Web Mapping Server Layer W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) Add Web Mapping Server Layer Adăugare layer generat de un Serviciu de Hărţi Web (WMS) In Overview În Vedere de Ansamblu O Add current layer to overview map O Adaugă stratul tematic curent în Vedere de Ansamblu Add current layer to overview map Adaugă stratul tematic curent în Vedere de Ansamblu Plugin Manager... Administrare plugin-uri... Open the plugin manager Deschide fereastra de Administrare plugin-uri Start editing the current layer Începe editarea stratului curent Stop editing the current layer Opreşte editarea stratului curent Capture Point Vectorizare Punct . Capture Points . Vectorizare Punct Capture Points Vectorizare Punct Capture Line Vectorizare Linie / Capture Lines / Vectorizare Linie Capture Lines Vectorizare Linie Capture Polygon Vectorizare Poligon Ctrl+/ Capture Polygons Ctrl+/ Vectorizare Poligon Capture Polygons Vectorizare Poligon Delete Seleced Sterge Obiecte Selectate Delete Selected Sterge Obiecte Selectate Add Vertex Adaugă Vertex Delete Vertex Şterge Vertex Move Vertex Mută Vertex Cut Features Extragere Obiecte Cut selected features Extragere Obiecte Selectate Copy Features Copiere Obiecte Copy selected features Copiere Obiecte Selectate Paste Features Adăugare Obiecte Paste selected features Adăugare Obiecte Selectate &File &Fişier &Open Recent Projects &Deschide Proiect Recent... &View &Vizualizare &Toolbars... &Unelte &Layer Strat &Tematic &Settings &Optiuni &Plugins &Plugin-uri &Help &Ajutor File Fişier Manage Layers Administrare Straturi Tematice Help Ajutor Digitizing Digitizare Map Navigation Navigaţie hartă Attributes Atribute Plugins Plugin-uri Progress bar that displays the status of rendering layers and other time-intensive operations Arată evoluţia randării hărţii sau a altor operaţii ce necesită mult timp Displays the current map scale Arată scara curentă a hărţii Shows the map coordinates at the current cursor postion. The display is continuously updated as the mouse is moved. Arată coorinatele hartă ale poziţiei mausului. Render Randare (Producere imagine) When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering. Când sunt selectate, straturile sunt afişate. Când nu sunt selectate, straturile nu vor fi randate şi astfel se permite adaugarea unui mare număr de straturi înainte de randare. Toggle map rendering Schimbă opţiunea de randare This icon shows whether on the fly projection is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour. Această iconiţă arată daca proiecţia automată este selectată sau nu. Această opţiune este selectaă din fereatra de Opţiuni Proiect. Projection status - Click to open projection dialog Proiectie - faceti click pentru a deschide fereastra de dialog pentru proiectii Ready Gata Map canvas. This is where raster and vector layers are displayed when added to the map Suprafata de afisare. Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas. Suprafata de previzualizare a hartii. Dimensiunea actuala a hartii este desenata cu un dreptunghi rosu. Orice layer poate fi adaugat in acest overview. Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties. Legenda hartii, ce arată toate straturile. Faceti click pe casuta de selectie pentru a arata sau a ascunde orice strat. Faceti dublu click pentru a customiza stratul respectiv. Version Versiune with PostgreSQL support cu suport PostgreSQL (no PostgreSQL support) fara suport PostgreSQL Compiled against Qt Compilata cu Qt , running against Qt , bazata pe Qt Quantum GIS is licensed under the GNU General Public License Quantum GIS este licentiat sub GNU General Public License http://www.gnu.org/licenses http://www.gnu.org/licenses Version Versiune New features Posibilitati noi WMS support Suport WMS Improved vector and attribute editing Editare date imbunatatita Map Composer for creating map layouts Creator de harti pentru definirea de harti pentru imprimare Improved measure tools with area measuring Unelte de masurare imbunatatite Attribute searching Cautare atribute New legend structure Structura noua a legendei Refactoring of API to allow the use of QGIS libraries in mapping applications Un API ce permite utilizarea librariilor QGIS in alte aplicatii. Improved MapServer export tool Export catre MapServer imbunatatit Map canvas background color is customizable Culoarea de fundal este customizabila Vector layer transparency Transparenta a straturilor tematice Antialiasing for vector layers Antialiasing pentru straturi tip vector GRASS support in all platforms Support GRASS multiplatforma Enhanced GRASS support and toolbox commands Support pentru GRASS imbunatatit Enhanced vector editing, including copy/paste, snapping and vertex editing Suport editare vector imbunatatit Shapefile/OGR layer editing Suport editare SHP/OGR Option to only look in the geometry_columns table when searching for PostGIS layers Optiune citire doar a tabelei geometry_columns pentru un layer PostGIS Many user interface improvements Foarte multe imbunatatiri de interfata cu utilizatorul Available Data Provider Plugins Plugin-uri pentru accesarea datelor Open an OGR Supported Vector Layer Deschide un strat accesat de OGR is not a valid or recognized data source nu este o sursa accesibila Invalid Data Source Sursa de date corupta Invalid Layer Layer corupt %1 is an invalid layer and cannot be loaded. %1 este un layer corupt si nu poate fi accesat. Save As Salvare Ca Choose a QGIS project file to open Alegeţi un fisier de proiect QGIS QGIS Project Read Error Eroare de citire a fisierului proiect Try to find missing layers? inceracti sa gasiti straturi disparute? Unable to open project Imposibil de citit proiectul Choose a QGIS project file Alegeţi un fisier de proiect QGIS Saved project to: Proiect salvat in: Unable to save project Imposibil de salvat proiectul Unable to save project to Imposibil de salvat proiectul in Unable to save project Imposibil de salvat proiectul Choose a filename to save the QGIS project file as Alegeţi un nume sub care să salvaţi proiectul QGIS: Unable to load project QGIS: Imposibil de citit proiectul Unable to load project Imposibil de citit proiectul Choose a filename to save the map image as Alegeţi un nume sub care să salvaţi imaginea hartii Saved map image to Harta salvata in: No Layer Selected Nu există nici un layer selectat To open an attribute table, you must select a layer in the legend Pentru a putea afisa tabela de atribute, trebuie ales un layer activ apăsînd pe numele lui în legendă Problem deleting features A apruta o problema la stergerea de obiecte A problem occured during deletion of features A apruta o problema la stergerea de obiecte No Vector Layer Selected Nu este selectat nici un layer tip vector Deleting features only works on vector layers Stergerea de obiecte este posibila doar pentru straturi tip vector To delete features, you must select a vector layer in the legend Pentru a sterge obiecte, trebuie ales un layer activ apăsînd pe numele lui în legendă Error Loading Plugin Eroare la incarcare plugin-uri There was an error loading %1. Eroare la incarcarea %1. No MapLayer Plugins Nu există Plugin-uri pentru Straturi Harta No MapLayer plugins in ../plugins/maplayer Nu există Plugin-uri pentru Straturi Harta in ../plugins/maplayer No Plugins Nu există Plugin-uri No plugins found in ../plugins. To test plugins, start qgis from the src directory Nu există Plugin-uri in ../plugins. Pentru a le putea testa, porniti QGIS din directorul sursa (src). Name Nume Plugin %1 is named %2 Pluginul %1 se numeste %2 Plugin Information Informatii plugin QGis loaded the following plugin: QGIS a incarcat dinamic urmatorul plugin: Name: %1 Nume: %1 Version: %1 Versiune: %1 Description: %1 Descriere: %1 Unable to Load Plugin Nu se poate incarca acest plugin QGIS was unable to load the plugin from: %1 QGIS nu a putut incarca dinamic acest plugin din: %1 There is a new version of QGIS available O noua versiune QGIS este disponibila You are running a development version of QGIS Rulati o versiune QGIS pentru dezvoltatori You are running the current version of QGIS Felicitari. Rulati cea mai recenta versiune QGIS. Would you like more information? Ati dori mai multe informatii? Yes Da No Nu QGIS - Changes in SVN Since Last Release Modificari QGIS de la utima versiune Unable to get current version information from server Nu se poate obtine legatura cu serverul de informatii Connection refused - server may be down Conexiune refuzata - serverul poate fi inactiv QGIS server was not found Serverul QGIS nu este disponibil Error reading from server Eroare la citire informatii server Unable to connect to the QGIS Version server Nu se poate face conexiunea cu serverul de versiune QGIS QGIS Browser Selection Selectarea Browser-ului pentru QGIS Enter the name of a web browser to use (eg. konqueror). Introduceti numele browser-ului de Internet (de exemplu konqueror). Enter the full path if the browser is not in your PATH. Introduceti calea absoluta, daca aplicatia nu se afla in variabila de system PATH You can change this option later by selecting Options from the Settings menu (Help Browser tab). Puteti modifica aceasta optiune mai tarziu selectand Optiuni din meniul de setari. Layer is not valid Layer corupt The layer is not a valid layer and can not be added to the map Stratul tematic este corupt si nu poate fi adaugat in harta. Save? Salvare? Do you want to save the current project? Doriti salvarea proiectului curent? Extents: Dimensiuni: Clipboard contents set to: Continutul clipboardului setat cu: Open a GDAL Supported Raster Data Source Deschide un strat tematic tip raster accesat de GDAL is not a valid or recognized raster data source nu este o sursa raster valida is not a supported raster data source nu este o sursa raster accesibila Unsupported Data Source Sursa de Date nu este suportata de QGIS Enter a name for the new bookmark: Introduceţi numele noului bookmark: Error Eroare Unable to create the bookmark. Your user database may be missing or corrupted Nu se poate crea acest bookmark. Ctrl+T Hide most toolbars Ctrl+T Checking provider plugins Starting Python Provider does not support deletion Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Data provider does not support deleting features Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Layer not editable Layerul nu este editabil The current layer is not editable. Choose 'Start editing' in the digitizing toolbar. Layerul curent nu este editabil. Apasati 'Permisiune de Editare' in bara de unelte pentru vectorizare. Toggle editing Toggles the editing state of the current layer Add Ring Add Island Add Island to multipolygon Scale Current map scale (formatted as x:y) Map coordinates at mouse cursor position Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. Invalid scale QGIS Version Information Network error while communicating with server Unknown network socket error Do you want to save the current project? Move Feature Split Features Map Tips Show information about a feature when the mouse is hovered over it Current map scale Project file is older <tt>Settings:Options:General</tt> Menu path to setting options Warn me when opening a project file saved with an older version of QGIS Ctrl-F Toggle fullscreen mode Toggle fullscreen mode Resource Location Error Error reading icon resources from: %1 Quitting... Overview Legend Legendă You are using QGIS version %1 built against code revision %2. This copy of QGIS has been built with PostgreSQL support. This copy of QGIS has been built without PostgreSQL support. This binary was compiled against Qt %1,and is currently running against Qt %2 Stop map rendering Multiple Instances of QgisApp Multiple instances of Quantum GIS application object detected. Please contact the developers. Shift+Ctrl+S Save Project under a new name &Print Composer Ctrl+P Print Composer Ctrl+P Imprimare Print Composer &Undo Ctrl+Z Undo the last operation Cu&t Ctrl+X Ctrl+X Cut the current selection's contents to the clipboard &Copy Ctrl+C Ctrl+C Copy the current selection's contents to the clipboard &Paste Ctrl+V Paste the clipboard's contents into the current selection M Measure a Line M Exportare fisier .map pentru MapServer J Measure an Area Zoom to Selection Ctrl+J Zoom to Selection Ctrl+J Măsurare suprafaţă Zoom Actual Size Zoom to Actual Size Add Vector Layer... Add Raster Layer... Add PostGIS Layer... W Add a Web Mapping Server Layer W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) Add a Web Mapping Server Layer Open Attribute Table Save as Shapefile... Save the current layer as a shapefile Save Selection as Shapefile... Save the selection as a shapefile Properties... Set properties of the current layer Add to Overview Add All to Overview Manage Plugins... Toggle Full Screen Mode Custom CRS... Manage custom coordinate reference systems Minimize Ctrl+M Minimize Window Ctrl+M Măsurare distanţe liniare Minimizes the active window to the dock Zoom Toggles between a predefined size and the window size set by the user Bring All to Front Bring forward all open windows &Edit Panels Toolbars &Window Toggle extents and mouse position display This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour. CRS status - Click to open coordinate reference system dialog Choose a file name to save the QGIS project file as Choose a file name to save the map image as Start editing failed Nu se poate incepe editarea Provider cannot be opened for editing Furnizorul de date nu poate fi accesat pentru editare. Stop editing Încetaţi editarea Do you want to save the changes to layer %1? Problems during roll back Probleme la aducerea in starea anterioara (roll back) Python Console Map coordinates for the current view extents Maptips require an active layer Quantum GIS - %1 Quantum GIS - %1 ('%2') %1 is not a valid or recognized data source QGis files (*.qgs) Fişiere QGIS (*.qgs) %1 Try to find missing layers? Saved project to: %1 Unable to save project to %1 Unable to save project %1 Unable to load project %1 Saved map image to %1 Could not commit changes to layer %1 Errors: %2 QGIS - Changes in SVN since last release Unable to communicate with QGIS Version server %1 Extents: %1 %1 is not a valid or recognized raster data source %1 is not a supported raster data source This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.Version of the project file: %1 Current version of QGIS: %2 Layers Layere (Straturi) Delete features Delete %n feature(s)? number of features to delete Add SpatiaLite Layer... L Add a SpatiaLite Layer Add a SpatiaLite Layer This copy of QGIS has been built with SpatiaLite support. This copy of QGIS has been built without SpatiaLite support. Zoom Next Zoom to Forward Extent Whats new in Version 1.1.0? Please note that this is a release in our 'unstable' release series. As such it contains new features and extends the programmatic interface over QGIS 1.0.x. If stability and long term support is more important to you than cool new and untested features, we recommend that you use a copy of QGIS from our stable 1.0.x release series. This release includes many bug fixes and enhancements over the QGIS 1.0.0 release. In addition we have added the following new features: Updates to translations. Improvements and polishing of the Python plugin installer. Switch to the new official QGIS repository. Improvements to themes so that plugins and other parts of the GUI are better supported when switching themes. Addition of the new GIS icon theme. Improvements to Debian packaging to better support Debian standard requirements. Support usb: as a GPS device under Linux. WMS plugin now supports sorting and shows nested layers as a tree. WMS provider also support 24bit png images now. The WMS plugin also now provides a search interface for finding WMS servers. Added svg point symbols from Matt Amos (with his permission). Improvements to proxy support and support of proxy in WFS provider. The WFS provider now also shows progress information as it is fetching data. Improvements to PostGIS client support. Massive speedups in PostGIS layer rendering can now be achieved by disabling SSL in the connection editor. Support for usage of ctid column as primary key (softens the requirement for integer primary keys) Mapserver Export improvements for continuous color support. Added tools menu - the fTools plugin is now part of the core QGIS plugins and will always be installed by default. Improvements to the print composer including object alignment options. It is also now possible to print maps as postcript raster or vector. For python programmers, the composer classes now have python bindings. When using File - Save as image, the saved image is now georeferenced. Projection selector now includes quick selection of recently used CRS's. Continuous color renderer supports point symbols now too. Improved CMake support for building against dependencies from OSGEO4W (Windows only). Addition of an XCode project of developers building under OSX. Updates and cleanups to the GRASS toolbox. Changes in open vector dialog to support all drivers available in ogr including database and protocol drivers. This brings with it support for SDE, Oracle Spatial, ESRI personal geodatabase and many more OGR supported data stores. Note that in some cases accessing these may require third party libraries to be on your system. The middle mouse button can now be used for panning. A new, faster attribute table implementation. Numerous cleanups to the user interface. A new provider was added for spatiallite - a geodatabase-in-a-file implementation based on the SQLITE database. Vector overlay support that can draw pie and bar charts over vector layers based on attribute data. Simplify Feature Delete Ring Delete Part Configure shortcuts... Configure shortcuts Advanced Digitizing QgisAppBase MainWindow Fereastra Principală Legend Legendă Map View Vizualizarea Hărţii QGIS QgsAbout QGIS Sponsors Sponsori QGIS The following have sponsored QGIS by contributing money to fund development and other project costs QGIS a fost sponsorizat de Name Nume Website Website QGIS Browser Selection Selectarea Browser-ului pentru QGIS Enter the name of a web browser to use (eg. konqueror). Enter the full path if the browser is not in your PATH. You can change this option later by selection Options from the Settings menu (Help Browser tab). Introduceţi numele Web Browser-ului pe care doriţi să-l utilizaţi (ex.: konqueror). Introduceţi calea completă dacă Browser-ul nu este in PATH-ul dvs. Puteţi modifica această opţiune mai târziu selectînd din Settings menu tab-ul Options. About Quantum GIS Despre Quantum GIS About Despre <h2>Quantum GIS (qgis)</h2> <h2>Quantum GIS (qgis)</h2> Version Versiune <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> Quantum GIS is licensed under the GNU General Public License http://www.gnu.org/licenses</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">Quantum GIS este licenţiat sub licenţa GNU General Public Licensehttp://www.gnu.org/licenses</body></html> QGIS Home Page Pagina QGIS Home Subscribe to the QGIS-User mailing list Abonare la lista de mail a utilizatorilor QGIS What's New Ce este nou Developers Dezvoltatori <h2>QGIS Developers</h2> <h2>Dezvoltatori QGIS</h2> Providers Furnizori Sponsors Sponsori Ok Ok Quantum GIS is licensed under the GNU General Public License Quantum GIS este licentiat sub GNU General Public License <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> Quantum GIS (QGIS)</body></html> http://www.gnu.org/licenses http://www.gnu.org/licenses Join our user mailing list The following have sponsored QGIS by contributing money to fund development and other project costs The following have contributed to QGIS by translating the user interface or documentation Language Names Available QGIS Data Provider Plugins Available Qt Database Plugins Available Qt Image Plugins Translators QgsAddAttrDialogBase Add Attribute Adăugaţi Atribut OK OK Cancel Renuţare Type: Tip: Name: Nume: QgsApplication Exception QgsAttributeActionDialog Name Nume Select an action File dialog window title Missing Information To create an attribute action, you must provide both a name and the action to perform. QgsAttributeActionDialogBase Form1 Form1 Remove the selected action Ştergeţi acţiunea selectată Remove Ştergeţi Move the selected action down Mutaţi acţiunea selectată mai jos Move down Mutaţi mai jos Move the selected action up Mutaţi acţiunea selectată mai sus Move up Mutaţi mai sus This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Insert action button. Actions can be edited here by double clicking on the item. Această listă conţine toate acţiunile definite pentru Layer-ul curent. Adăugaţi acţiuni introducînd detaliile mai jos, apoi apăsînd butonul Inserare acţiune. Acţiunile pot fi editate apăsînd dublu clic pe elementul respectiv. The valid attribute names for this layer Numele atributelor valide pentru acest Layer Browse for action commands Selectaţi comenzile pentru acţiuni Browse Selectaţi Inserts the selected field into the action, prepended with a % Inseraţi câmpul selectat în acţiune, precedat de % Insert field Inseraţi câmp Update the selected action Actualizaţi acţiunea selectată Update action Actualizaţi acţiunea Inserts the action into the list above Inseraţi acţiunea în lista de mai sus Insert action Inseraţi acţiune Captures any output from the action Preia orice rezultat al acţiunii Captures the standard output or error generated by the action and displays it in a dialog box Preia rezultatul standard sau eroarea generată de către acţiune şi o afişează într-o fereastră de dialog Capture output Preluare rezultat Enter the action command here Introduceţi comanda aici Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if preceeded by a backslash Introduceţi comanda aici. Aceasta poate fi orice program, script sau comandă care este disponibilă pentru sistemul dvs. Când acţiunea este executată, orice set de caractere care începe cu % şi are numele unui câmp va fi înlocuit cu valoarea acelui câmp. Caracterele speciale % % vor fi înlocuite cu valoarea câmpului selectat. Ghilimelele marchează textul respectiv într-un singur argument pentru program, script sau comandă. Ghilimelele precedate de \ vor fi ignorate Action: Acţiune: Enter the action name here Introduceţi numele acţiunii aici Enter the name of an action here. The name should be unique (qgis will make it unique if necessary). Introduceţi numele acţiunii aici. Numele trebuie să fie unic (qgis îl va face unic, dacă e necesar). Name: Nume: Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if preceeded by a backslash Attribute Actions Action properties Name Nume Action Browse for action Click to browse for an action ... ... Capture Clicking the button will let you select an application to use as the action QgsAttributeDialog (int) (dbl) (txt) ... ... Select a file QgsAttributeDialogBase Enter Attribute Values Introduceţi valoarile atributului 1 1 Attribute Atribut Value Valoare &OK &OK &Cancel &Renunţă QgsAttributeTable Run action Executaţi acţiunea Abort Renunta QgsAttributeTableBase Attribute Table Tabela de atribute &Help &Ajutor Alt+C Alt+C Search for: Căutaţi: in în Search Căutare Adva&nced... Ava&nsat... Alt+N Alt+N &Close &Închidere Remove selection Înlăturaţi selecţia Move selected to top Mutaţi elementele selectate deasupra Ctrl+T Ctrl+T Invert selection Inversaţi selecţia Ctrl+S Ctrl+S Copy selected rows to clipboard (Ctrl+C) Copiaţi liniile selectate (Ctrl+C) Copies the selected rows to the clipboard Copiază liniile selectate Ctrl+C Ctrl+C New column Coloană nouă Ctrl+N Ctrl+N Delete column Ştergeţi coloana Ctrl+X Ctrl+X Start editing Editaţi Stop editin&g Încetaţi editarea Alt+G Alt+G Ctrl+F Ctrl+F Apropiere de Selecţie Ctrl+J Ctrl+J Măsurare suprafaţă QgsAttributeTableDialog Attribute table - %1 Search string parsing error Eroarea la analizarea criteriului de căutare Search results Căutare în rezultate You've supplied an empty search string. Nu aţi introdus criteriul de căutare. Error during search Eroare la căutare Found %d matching features. No matching features found. Nu au fost găsite caracteristici corespunzătoare. Attribute Table Tabela de atribute Remove selection Înlăturaţi selecţia Move selected to top Mutaţi elementele selectate deasupra Ctrl+T Ctrl+T Invert selection Inversaţi selecţia Ctrl+S Copy selected rows to clipboard (Ctrl+C) Copiaţi liniile selectate (Ctrl+C) Copies the selected rows to the clipboard Copiază liniile selectate Ctrl+C Ctrl+C Zoom map to the selected rows (Ctrl-J) Zoom map to the selected rows Ctrl+J Ctrl+J Măsurare suprafaţă Toggle editing mode Click to toggle table editing Look for in în &Search Show selected records only Advanced search ... ... Search selected records only QgsAttributeTableDisplay select selectaţi select and bring to top selectaţi şi aduceţi deasupra show only matching arătaţi doar cele potrivite Search string parsing error Eroarea la analizarea criteriului de căutare Search results Căutare în rezultate You've supplied an empty search string. Nu aţi introdus criteriul de căutare. Error during search Eroare la căutare Found %d matching features. No matching features found. Nu au fost găsite caracteristici corespunzătoare. Stop editing Încetaţi editarea Do you want to save the changes? Sunteţi sigur că doriţi să salvati? Error Eroare Could not commit changes Nu se pot salva modificarile efectuate. Attribute table - Tabela de atribute- File Fişier Close Închidere Edit Editare Ctrl+X Ctrl+X Ctrl+C Ctrl+C Delete Ştergere Ctrl+J Ctrl+J Măsurare suprafaţă Found %n matching feature(s). search results QgsBookmarks Really Delete? Sunteţi sigur că doriţi să ştergeţi? Are you sure you want to delete the Sunteţi sigur că doriţi să ştergeţi bookmark? bookmark-ul? &Yes &Da &No &Nu Error deleting bookmark Eroare la ştergerea bookmark-ului Failed to delete the Nu s-a reuşit ştergerea bookmark from the database. The database said: bookmark-ului din baza de date. Mesajul bazei de date a fost: &Delete &Zoom to Are you sure you want to delete the %1 bookmark? Failed to delete the %1 bookmark from the database. The database said: %2 QgsBookmarksBase Geospatial Bookmarks Bookmark-uri Geospaţiale Name Nume Project Proiect Extent Extent Id Id Close the dialog Închideţi dialogul Help Ajutor Close Închidere Delete the currently selected bookmark Ştergeţi bookmark-ul selectat Delete Ştergere Zoom to the currently selected bookmark Apropiaţi bookmark-ul selectat Zoom To Apropiaţi QgsComposer QGIS - print composer QGIS - setarea print-ului Map 1 Harta 1 Couldn't open Nu a putut fi deschis for read/write pentru citire/scriere Error in Print Eroare la printare Cannot seek Nu poate fi căutat Cannot overwrite BoundingBox Cadrul nu poate fi suprascris Cannot find BoundingBox Cadrul nu poate fi găsit Cannot overwrite translate Translaţia nu poate fi suprascrisă Cannot find translate Translaţia nu poate fi găsită File IO Error Eroare IO la accesarea fişierului Paper does not match Hârtia nu este potrivită The selected paper size does not match the composition size Formatul hârtiei alese nu se potriveşte cu dimensiunile print-ului Big image Imagine mare To create image Pentru a crea imaginea requires circa sunt necesare aprox MB of memory MB de memorie format format Choose a filename to save the map image as Alegeţi un nume sub care să salvaţi imaginea hărţii SVG warning avertisment SVG Don't show this message again Nu mai arătaţi acest mesaj The SVG export function in Qgis has several problems due to bugs and deficiencies in the Qt4 svg code. Of note, text does not appear in the SVG file and there are problems with the map bounding box clipping other items such as the legend or scale bar.If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory. Funcţia de export SVG în Qgis are câteva probleme datorate unor bug-uri şi deficienţe ale codului svg Qt4. De notat că textul nu apare în fişierul SVG şi exită probleme cu cadrull hărţii dacă acesta întretaie alte elemente precum legenda sau scara.Dacă doriţi un fişier de output cu date vectoriale din Qgis, puteţi încerca sa printaţi in PostScript, dacă output-ul SVG nu este satisfăcător. Choose a filename to save the map as Alegeţi un nume sub care să salvaţi harta SVG Format Format SVG QGIS File Fişier Close Închidere Ctrl+W Edit Editare &Undo Ctrl+Z Cu&t Ctrl+X Ctrl+X &Copy Ctrl+C Ctrl+C &Paste Ctrl+V Delete Ştergere View Layout Choose a file name to save the map image as Choose a file name to save the map as Project contains WMS layers Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed The SVG export function in Qgis has several problems due to bugs and deficiencies in the %1 format (*.%2 *.%3) Qt4 svg code. Of note, text does not appear in the SVG file and there are problems with the map bounding box clipping other items such as the legend or scale bar. Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box. To create image %1 x %2 requires circa %3 MB of memory If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory. save template Save error Error, could not save file Load template Read error Error, could not read file Content of template file is not valid QgsComposerBase MainWindow Fereastra principală General General Composition Compunere Item Element Close Închidere Help Ajutor &Open Template ... &Deschide Template... Save Template &As... Salvare Template &Ca... &Print... &Printare... Zoom All Apropiere toate Zoom In Apropiere Zoom Out Depărtare Add new map Adăugare hartă nouă Add new label Adăugare etichetă nouă Add new vect legend Adăugare legendă vect nouă Select/Move item Selectaţi/Mutaţi element Export as image Exportaţi ca imagine Export as SVG Exportaţi în format SVG Add new scalebar Adăugaţi o nouă scară Refresh view Refresh view Add Image Adăugaţi imagine Zoom Full Vedere de ansamblu Add Map Add Label Add Vector Legend Move Item Export as Image... Export as SVG... Add Scalebar Refresh Actualizează Move Content Move item content Group Grup Group items Ungroup Ungroup items Raise Raise selected items Lower Lower selected items Bring to Front Move selected items to top Send to Back Move selected items to bottom Load From template Save as template Align left Align selected items left Align center Align center horizontal Align right Align selected items right Align top Align selected items to top Align center vertical Align bottom Align selected items bottom QgsComposerItemWidgetBase Form Composer item properties Color: Frame... Background... Opacity: Outline width: Frame Cadru Position... QgsComposerLabelBase Label Options Opţiuni etichetă Box Box Font Font QgsComposerLabelWidgetBase Label Options Opţiuni etichetă Font Margin (mm): QgsComposerLegend Legend Legendă QgsComposerLegendItemDialogBase Legend item properties Item text: QgsComposerLegendWidgetBase Barscale Options Opţiuni petru afişare scara hărţii General General Title: Font: Title... Layer... Item... Symbol width: Symbol height: Layer space: Symbol space: Icon label space: Box space: Legend items down up remove edit... update update all QgsComposerMap Map %1 Harta %1 Extent (calculate scale) Dimensiune (calcul scară) Scale (calculate extent) Scară (calcul dimensiune) Cache Cache Render Afişare Rectangle Dreptunghi Map Hartă Map will be printed here QgsComposerMapBase Map options Opţiuni hartă Map Hartă Set Setare Width Lăţime Height Înălţime Scale Scară 1 : 1 : Set map extent to current extent in QGIS map canvas Setaţi dimensiunea hărţii ca fiind cea actuală din harta QGIS Set Extent Setaţi dimensiune Line width scale Mărimea liniei Width of one unit in millimeters Lăţimea unei unităţi în milimetri Symbol scale Mărimea simbolului Font size scale Mărimea fontului Frame Cadru Preview Previzualizare QgsComposerMapWidget Cache Cache Rectangle Dreptunghi Render QgsComposerMapWidgetBase Map options Opţiuni hartă Map Hartă Width Lăţime Height Înălţime Scale: 1: Map extent X min: Y min: X max: Y max: set to map canvas extent Preview Previzualizare Update preview QgsComposerPicture Warning Atenţie Cannot load picture. Nu se poate încărca imaginea. Pictures ( Imagini ( Choose a file Alegeţi un fişier QgsComposerPictureBase Picture Options Opţiuni Imagine Picture Imagine ... ... Frame Cadru Angle Unghi Width Lăţime Height Înălţime Browse Selectaţi QgsComposerPictureWidget Select svg or image file Select new preview directory Creating icon for file %1 QgsComposerPictureWidgetBase Picture Options Opţiuni Imagine Browse... Width: Height: Rotation: Search directories Add... Remove Ştergeţi Preview Previzualizare QgsComposerScaleBarWidget Single Box Double Box Line Ticks Middle Line Ticks Down Line Ticks Up Numeric Map %1 Harta %1 QgsComposerScaleBarWidgetBase Barscale Options Opţiuni petru afişare scara hărţii Segment size (map units): Map units per bar unit: Number of segments: Segments left: Style: Map: Height (mm): Line width: Label space: Box space: Unit label: Font... Color... QgsComposerScalebarBase Barscale Options Opţiuni petru afişare scara hărţii Segment size Mărimea Segmentului Number of segments Numar de segmente Map units per scalebar unit Unităti hartă corespunzătoare unei unităti de scară Unit label Denumirea unităţii Map Hartă Font Font (scris) Line width Mărimea liniei QgsComposerVectorLegend Legend Legendă Layers Layere (Straturi) Group Grup Combine selected layers Combină layerele selectate Cache Cache Render Randare (Producere imagine) Rectangle Dreptunghi QgsComposerVectorLegendBase Vector Legend Options Opţiuni legendă vector Title Titlu Map Hartă Font Font (scris) Box Box (Dimensiuni) Column 1 Coloana 1 Preview Previzualizare Layers Layere (Straturi) Group Grup ID QgsComposition Custom Customizat A5 (148x210 mm) A5 (148x210 mm) A4 (210x297 mm) A4 (210x297 mm) A3 (297x420 mm) A3 (297x420 mm) A2 (420x594 mm) A2 (420x594 mm) A1 (594x841 mm) A1 (594x841 mm) A0 (841x1189 mm) A0 (841x1189 mm) B5 (176 x 250 mm) B5 (176 x 250 mm) B4 (250 x 353 mm) B4 (250 x 353 mm) B3 (353 x 500 mm) B3 (353 x 500 mm) B2 (500 x 707 mm) B2 (500 x 707 mm) B1 (707 x 1000 mm) B1 (707 x 1000 mm) B0 (1000 x 1414 mm) B0 (1000 x 1414 mm) Letter (8.5x11 inches) Letter (8.5x11 inches) Legal (8.5x14 inches) Legal (8.5x14 inches) Portrait Orientare Portret Landscape Orientare Peisaj Out of memory Memorie sistem consumată Qgis is unable to resize the paper size due to insufficient memory. It is best that you avoid using the map composer until you restart qgis. Qgis nu poate redimensiona pagina datorită memorie insuficiente. Restarţi QGIS pentru a putea folosi din nou modulul pentru creare harţi. Label Etichetă (Denumire) Warning Atenţie Cannot load picture. Nu se poate încărca imaginea. QgsCompositionBase Composition Compunere Paper Hârtie (pagină) Size Dimensiuni Units Unităţi Width Lăţime Height Înălţime Orientation Orientare Resolution (dpi) Rezoluţie (dpi) QgsCompositionWidget Landscape Orientare Peisaj Portrait Orientare Portret Custom Customizat A5 (148x210 mm) A5 (148x210 mm) A4 (210x297 mm) A4 (210x297 mm) A3 (297x420 mm) A3 (297x420 mm) A2 (420x594 mm) A2 (420x594 mm) A1 (594x841 mm) A1 (594x841 mm) A0 (841x1189 mm) A0 (841x1189 mm) B5 (176 x 250 mm) B5 (176 x 250 mm) B4 (250 x 353 mm) B4 (250 x 353 mm) B3 (353 x 500 mm) B3 (353 x 500 mm) B2 (500 x 707 mm) B2 (500 x 707 mm) B1 (707 x 1000 mm) B1 (707 x 1000 mm) B0 (1000 x 1414 mm) B0 (1000 x 1414 mm) Letter (8.5x11 inches) Letter (8.5x11 inches) Legal (8.5x14 inches) Legal (8.5x14 inches) Solid Dots Crosses QgsCompositionWidgetBase Composition Compunere Paper Hârtie (pagină) Orientation Orientare Height Înălţime Width Lăţime Units Unităţi Size Dimensiuni Print quality (dpi) Snapping Snap to grid Grid resolution: Offset x: Offset y: Pen width: Grid color: Grid style: Print as raster QgsConfigureShortcutsDialog None Niciunul/Niciuna Set default (%1) Input: Change Schimba Shortcut conflict This shortcut is already assigned to action %1. Reassign? Configure shortcuts Action Shortcut Set none Set default QgsConnectionDialog Test connection Test conexiune Connection to Conectarea la was successfull a fost efectuată Connection failed - Check settings and try again Conexiunea a eşuat - Verificaţi setările General Interface Help: Ajutor general pentru Interfaţă: QgsConnectionDialogBase Create a New PostGIS connection Crează o nouă conexiune PostGIS Connection Information Informaţii conexiune Save Password Salvează parola Test Connect Test conexiune Name Nume Host Adresă (host) Database Baza de date Port Port Username Nume Utilizator (Login) Password Parola Name of the new connection Numele conexiunii noi 5432 5432 Help Ajutor F1 F1 OK Ok Cancel Renunţare QgsContinuousColorDialogBase Continuous color Culoare continuă Draw polygon outline Desenează linia exterioară a polygonului Classification Field: Atribut pentru clasificare: Minimum Value: Valoare Minimă: Outline Width: Dimensiuni linie exterioară: Maximum Value: Valoare Maximă: QgsCoordinateTransform The source spatial reference system (SRS) is not valid. Sistemul de referinta spatial (SRS) nu este valid. The coordinates can not be reprojected. The SRS is: Coordinatele nu pot fi reproiectate. SRS: The destination spatial reference system (SRS) is not valid. Sistemul de referinta spatial (SRS) de destinatie nu este valid. Failed Esuat. transform of transformare a with error: cu eroarea: The source spatial reference system (CRS) is not valid. The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1 QgsCopyrightLabelPlugin Bottom Left Stanga jos Top Left Stanga sus Top Right Dreapta sus Bottom Right Dreapta jos &Copyright Label &Eticheta Drepturi de Autor Creates a copyright label that is displayed on the map canvas. Creaza o Eticheta Drepturi de Autor pentru a fi afisată in harta &Decorations &Decoratii QgsCopyrightLabelPluginGuiBase Copyright Label Plugin Plugin Eticheta Drepturi de Autor <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">DescriptionEnter your copyright label below. This plugin supports basic html markup tags for formatting the label. For example: Bold text Italics (note: &copy; gives a copyright symbol)</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">DescriereIntroduceti Eticheta Drepturi de Autor. Html markup este permis. exemplu: Bold text Italics (nota: &copy; afiseaza symbolul de copyright)</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">© QGIS 2006</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">© QGIS 2006</body></html> Placement Pozitionare Bottom Left Stanga jos Top Left Stanga sus Bottom Right Dreapta jos Top Right Dreapta sus Orientation Orientare Horizontal Orizontal Vertical Vertical Enable Copyright Label Arata Eticheta Drepturi de Autor Help Ajutor Alt+O Alt+O &OK &OK &Cancel &Renunţă Alt+C Alt+C Color Culoare <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Verdana'; font-size:10pt; font-weight:400; font-style:normal;"> Description Enter your copyright label below. This plugin supports basic html markup tags for formatting the label. For example: Bold text Italics (note: &copy; gives a copyright symbol)</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Verdana'; font-size:10pt; font-weight:400; font-style:normal;"> © QGIS 2009</body></html> QgsCustomProjectionDialog Delete Projection Definition? Sterge definire proiectie Deleting a projection definition is not reversable. Do you want to delete it? Stergerea proiectiei este definitiva. Sunteti sigur ca vreti sa o stergeti? Abort Renunta New Noua QGIS Custom Projection Proiectie customizata This proj4 projection definition is not valid. Please give the projection a name before pressing save. Acesta definire a proiectiei nu este valida. Introduceti un nume pentru aceasta proiectie inainte de a o salva. This proj4 projection definition is not valid. Please add the parameters before pressing save. Acesta definire a proiectiei nu este valida. Introduceti parametri aceastei proiectie inainte de a o salva. This proj4 projection definition is not valid. Please add a proj= clause before pressing save. Acesta definire a proiectiei nu este valida. Adaugati proj= inainte de a o salva. This proj4 ellipsoid definition is not valid. Please add a ellips= clause before pressing save. Acesta definire a proiectiei nu este valida. Introduceti ellips= . This proj4 projection definition is not valid. Please correct before pressing save. Acesta definire a proiectiei nu este valida. Va rugam sa o corectati. This proj4 projection definition is not valid. Acesta definire a proiectiei nu este valida. Northing and Easthing must be in decimal form. Coordonatele pe Nord si Est trebuie sa fie in format decimal. Internal Error (source projection invalid?) eroare interna (este proiectia sursa valida?) Please give the projection a name before pressing save. Please add the parameters before pressing save. Please add a proj= clause before pressing save. This proj4 ellipsoid definition is not valid. Please add a ellips= clause before pressing save. COMMENTED OUT Acesta definire a proiectiei nu este valida. Introduceti ellips= . Please correct before pressing save. QgsCustomProjectionDialogBase Custom Projection Definition Definitie proiectie customizata Define Defineste <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">You can define your own custom projection here. The definition must conform to the proj4 format for specifying a Spatial Reference System.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">aici se poate defini proiectia customizata. formatul trebuie sa fie conform cu proj4.</body></html> Parameters: Parametri: |< |< < < 1 of 1 1 din 1 > > >| >| New Noua Save Salvare Delete Ştergere Close Închidere Name: Nume: Test Test Transform from WGS84 to the chosen projection Transformare din WGS84 catre poiectia aleasa <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Use the text boxes below to test the projection definition you are creating. Enter a coordinate where both the lat/long and the projected result are known (for example by reading off a map). Then press the calculate button to see if the projection definition you are creating is accurate.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Utilizati casutele de mai jos pentru a testa proiectia definita de dvs. Introduceti coordonatele de intrare si rezultatul acolo unde se cunoaste (de ex. citind de pe o harta). Apoi apasati butonul de calculare ca sa vedeti daca transformarea este corecta.</body></html> Projected Corrdinate System Sistem de Coordonate Proiectate Geographic / WGS84 Geografic / WGS84 East: Coordonate estice North: Coordonate pe nord: Calculate Calculează Name Nume Parameters * S X North East Custom Coordinate Reference System Definition You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS. Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate. Destination CRS QgsDbSourceSelect Type Tip Name Nume Sql Sql Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea Yes Da No Nu Select Table Password for Please enter your password: Connection failed Wildcard RegExp All Schema Table Geometry column Accessible tables could not be determined Database connection was successful, but the accessible tables could not be determined. The error message from the database was: %1 No accessible tables found Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry. Are you sure you want to remove the %1 connection and all associated settings? You must select a table in order to add a layer. Connection to %1 on %2 failed. Either the database is down or your settings are incorrect. Check your username and password and try again. The database said: %3 QgsDbSourceSelectBase Add PostGIS Table(s) Adauga tabela PostGIS Help Ajutor F1 F1 Add Adauga Close Închidere Encoding: Codificare Tables: Tabele: Type Tip Name Nume Sql Sql PostgreSQL Connections Conexiuni PostGIS Delete Ştergere Edit Editare New Noua Connect Conectare Search: Search mode: Search in columns: Search options... QgsDbTableModel Schema Table Type Tip Geometry column Sql Sql Point Punct Multipoint Line Linie Multiline Polygon Poligon Multipolygon QgsDelAttrDialogBase Delete Attributes Sterge Atribute OK Ok Cancel Renuţare QgsDelimitedTextPlugin &Add Delimited Text Layer &Delimited text DelimitedTextLayer Add a delimited text file as a map layer. The file must have a header row containing the field names. X and Y fields are required and must contain coordinates in decimal units. QgsDelimitedTextPluginGui No layer name Please enter a layer name before adding the layer to the map No delimiter Please specify a delimiter prior to parsing the file Choose a delimited text file to open Parse Description Descriere: Select a delimited text file containing a header row and one or more rows of x and y coordinates that you would like to use as a point layer and this plugin will do the job for you! Use the layer name box to specify the legend name for the new layer. Use the delimiter box to specify what delimeter is used in your file (e.g. space, comma, tab or a regular expression in Perl style). After choosing a delimiter, press the parse button and select the columns containing the x and y values for the layer. QgsDelimitedTextPluginGuiBase Create a Layer from a Delimited Text File &Help &Ajutor Alt+A Alt+A Close the dialog Închideţi dialogul &Close &Închidere Alt+C Alt+C X field X Name of the field containing x values Name of the field containing x values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file. Y field Y Name of the field containing y values Name of the field containing y values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file. Sample text <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:12pt;font-family:Arial"> Description Select a delimited text file containing x and y coordinates that you would like to use as a point layer and this plugin will do the job for you! Use the layer name box to specify the legend name for the new layer. Use the delimiter box to specify what delimeter is used in your file (e.g. space, commar or tab). Note this box accepts regular expressions so use \t for tab and so on. After choosing a delimiter, press the parse button an select the columns containing the x and y values for the layer. </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:12pt;font-family:Arial">DescriptionSelectati va rog un text continand coordonate x si y pe care doriti sa le transformati intr-un strat tip punct.utilizati casuta de nume pentru a specifica numele stratului ce va apare in legenda. utilizati casuta de delimitare pentru a specifica caracterele ce servesc pentru delimitarea coordonatelor. Dupa accea apsati butonul pentru a selecta coloanele corespunzatoare.</body></html> Delimited Text Layer Delimited text file Full path to the delimited text file Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file. Browse to find the delimited text file to be processed Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the Delimiter box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file. Utilizati butonul pentru a selecta locatia fisierului. mai inainte alegeti un tip de delimitare din casuta tip delimitare. ... ... Layer name Name to display in the map legend Name displayed in the map legend Delimiter Delimiter to use when splitting fields in the text file. The delimiter can be more than one character. Delimiter to use when splitting fields in the delimited text file. The delimiter can be 1 or more characters in length. Browse... The delimiter is taken as is Plain characters The delimiter is a regular expression Regular expression <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Verdana'; font-size:10pt; font-weight:400; font-style:normal;"> </body></html> QgsDelimitedTextProvider Note: the following lines were not loaded because Qgis was unable to determine values for the x and y coordinates: Error Eroare QgsDetailedItemWidgetBase Form Heading Label Detail label QgsDiagramDialog Pie chart Bar chart Proportional SVG symbols QgsDiagramDialogBase Dialog Display diagrams Diagram type: Classification attribute: Classification type: QgsDlgPgBufferBase Buffer features Parameters Geometry column: Add the buffered layer to the map? Spatial reference ID: Schema: Unique field to use as feature id: Table name for the buffered layer: Create unique object id public Buffer distance in map units: <h2>Buffer the features in layer: </h2> <h2>Faceti un Buffer al obiectelor din stratul: </h2> &Help &Ajutor F1 F1 &OK &OK &Cancel &Renunţă QgsEditReservedWordsBase Edit Reserved Words Editeaza Cuvinte rezervate <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Double click the Column Name column to change the name of the column.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Faceti dublu click pentru a schimba numele coloanei.</body></html> Status Starea actuala Column Name Nume coloana Index Index &Help &Ajutor F1 F1 &OK &OK &Cancel &Renunţă <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This shapefile contains reserved words. These may affect the import into PostgreSQL. Edit the column names so none of the reserved words listed at the right are used (click on a Column Name entry to edit). You may also change any other column name if desired.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Acest fişier shape contine cuvinte rezervate. Editati numele coloanelor pentru a evita folosirea unor astefel de cuvinte care poate afecta importul in PostGIS</body></html> Reserved Words Cuvinte rezervate QgsEditReservedWordsDialog Status Starea actuala Column Name Nume coloana Index Index QgsEncodingFileDialog Encoding: Codificare QgsFillStyleWidgetBase Form1 Form1 Fill Style Stilul de umplere col col Colour: Culoare: PolyStyleWidget PolyStyleWidget QgsGPSDeviceDialog New device %1 Aparat nou %1 Are you sure? Sunteti singur? Are you sure that you want to delete this device? Sunteti sigur ca doriti sa stergeti acest aparat? QgsGPSDeviceDialogBase GPS Device Editor New device Delete device Update device This is the name of the device as it will appear in the lists Commands Track download: Route upload: Waypoint download: The command that is used to download routes from the device Route download: The command that is used to upload waypoints to the device Track upload: The command that is used to download tracks from the device The command that is used to upload routes to the device The command that is used to download waypoints from the device The command that is used to upload tracks to the device Waypoint upload: <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:%babel - the path to GPSBabel %in - the GPX filename when uploading or the port when downloading %out - the port when uploading or the GPX filename when downloading</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">In comenzile de download si upload pot exista cuvinte speciale ca re vor fi inlocuite de QGIS. Acestea sunt:%babel - calea catre GPSBabel %in - nume fisier GPX %out - port</body></html> Close Închidere Device name <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Verdana'; font-size:10pt; font-weight:400; font-style:normal;"> In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:%babel - the path to GPSBabel %in - the GPX filename when uploading or the port when downloading %out - the port when uploading or the GPX filename when downloading</body></html> QgsGPSPlugin &Gps Tools &Create new GPX layer Creates a new GPX layer and displays it on the map canvas &Gps Save new GPX file as... GPS eXchange file (*.gpx) Could not create file Unable to create a GPX file with the given name. Try again with another name or in another directory. GPX Loader Could not start process Could not start GPSBabel! Importing data... Cancel Could not import data from %1! Error importing data Not supported Downloading data... Could not download data from GPS! Error downloading data Uploading data... Error while uploading data to GPS! Error uploading data Could not convert data from %1! Error converting data Unable to read the selected file. Please reselect a valid file. This device does not support downloading of %1. This device does not support uploading of %1. QgsGPSPluginGui Choose a filename to save under Alegeţi un nume de fişier pentru salvare GPS eXchange format (*.gpx) formatul GPS eXchange (*.gpx) Select GPX file Selectati fişierul GPX Select file and format to import alegeti fisierul si formatul pentru import Waypoints Routes Tracks QGIS can perform conversions of GPX files, by using GPSBabel (%1) to perform the conversions. This requires that you have GPSBabel installed where QGIS can find it. GPX is the %1, which is used to store information about waypoints, routes, and tracks. GPS eXchange file format Select a GPX file and then select the feature types that you want to load. This tool will help you download data from a GPS device. Choose your GPS device, the port it is connected to, the feature type you want to download, a name for your new layer, and the GPX file where you want to store the data. If your device isn't listed, or if you want to change some settings, you can also edit the devices. This tool uses the program GPSBabel (%1) to transfer the data. This tool will help you upload data from a GPX layer to a GPS device. Choose the layer you want to upload, the device you want to upload it to, and the port your device is connected to. QGIS can only load GPX files by itself, but many other formats can be converted to GPX using GPSBabel (%1). All file formats can not store waypoints, routes, and tracks, so some feature types may be disabled for some file formats. Choose a file name to save under Select a GPS file format and the file that you want to import, the feature type that you want to use, a GPX file name that you want to save the converted file as, and a name for the new layer. Select a GPX input file name, the type of conversion you want to perform, a GPX file name that you want to save the converted file as, and a name for the new layer created from the result. QgsGPSPluginGuiBase GPS Tools &Help &Ajutor Alt+C Alt+C &OK &OK Alt+O Alt+O &Cancel &Renunţă Load GPX file <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> GPX is the <a href="http://www.topografix.com/gpx.asp">GPS eXchange file format</a>, which is used to store information about waypoints, routes, and tracks. Select a GPX file and then select the feature types that you want to load.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">GPX este <a href="http://www.topografix.com/gpx.asp">formatul GPS eXchange</a>, utilizat pentru transferul de waypoints, routes, si tracks.Selectati un fisier GPX file si apoi selectati tipul obiectelor pe care doriti sa le incarcati.</body></html> File: ... ... Feature types: Waypoints Routes Tracks Import other file <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> QGIS can only load GPX files by itself, but many other formats can be converted to GPX using GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>). This requires that you have GPSBabel installed where QGIS can find it. Select a GPS file format and the file that you want to import, the feature type that you want to use, a GPX filename that you want to save the converted file as, and a name for the new layer. All file formats can not store waypoints, routes, and tracks, so some feature types may be disabled for some file formats.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">QGIS can only load GPX files by itself, but many other formats can be converted to GPX using GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>). This requires that you have GPSBabel installed where QGIS can find it.Select a GPS file format and the file that you want to import, the feature type that you want to use, a GPX filename that you want to save the converted file as, and a name for the new layer. All file formats can not store waypoints, routes, and tracks, so some feature types may be disabled for some file formats.</body></html> Layer name: GPX output file: Feature type: File to import: Download from GPS <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> This tool will help you download data from a GPS device. Choose your GPS device, the port it is connected to, the feature type you want to download, a name for your new layer, and the GPX file where you want to store the data. If your device isn't listed, or if you want to change some settings, you can also edit the devices. This tool uses the program GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>) to transfer the data. If you don't have GPSBabel installed where QGIS can find it, this tool will not work.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">This tool will help you download data from a GPS device. Choose your GPS device, the port it is connected to, the feature type you want to download, a name for your new layer, and the GPX file where you want to store the data. If your device isn't listed, or if you want to change some settings, you can also edit the devices.This tool uses the program GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>) to transfer the data. If you don't have GPSBabel installed where QGIS can find it, this tool will not work.</body></html> Port: Output file: GPS device: Edit devices Upload to GPS <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> This tool will help you upload data from a GPX layer to a GPS device. Choose the layer you want to upload, the device you want to upload it to, and the port your device is connected to. If your device isn't listed, or if you want to change some settings, you can also edit the devices. This tool uses the program GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>) to transfer the data. If you don't have GPSBabel installed where QGIS can find it, this tool will not work.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Arial'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">This tool will help you upload data from a GPX layer to a GPS device. Choose the layer you want to upload, the device you want to upload it to, and the port your device is connected to. If your device isn't listed, or if you want to change some settings, you can also edit the devices.This tool uses the program GPSBabel (<a href="http://gpsbabel.sf.net">http://gpsbabel.sf.net</a>) to transfer the data. If you don't have GPSBabel installed where QGIS can find it, this tool will not work.</body></html> Data layer: Browse... Save As... (Note: Selecting correct file type in browser dialog important!) GPX Conversions Conversion: GPX input file: <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Verdana'; font-size:10pt; font-weight:400; font-style:normal;"> </body></html> Edit devices... Refresh Actualizează QgsGPXProvider Bad URI - you need to specify the feature type. GPS eXchange file Digitized in QGIS QgsGenericProjectionSelector This layer appears to have no projection specification. By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below. Define this layer's coordinate reference system: QgsGenericProjectionSelectorBase Coordinate Reference System Selector QgsGeomTypeDialog Name Nume Type Tip Real Integer String QgsGeomTypeDialogBase New Vector Layer Crează un nou layer tip Vector Help Ajutor OK Ok Cancel Renuţare File Format: Format fişier: Remove Ştergeţi Attributes: Atribute Add Adauga Type Tip Point Punct Line Linie Polygon Poligon Column 1 Coloana 1 File format Attributes Atribute Name Nume ... ... Delete selected attribute Add attribute Width Lăţime Precision Precizie QgsGeorefDescriptionDialogBase Description georeferencer <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;"> Description This plugin can generate world files for rasters. You select points on the raster and give their world coordinates, and the plugin will compute the world file parameters. The more coordinates you can provide the better the result will be.</body></html> QgsGeorefPlugin &Georeferencer &Ortorectificator Georeferencer GDAL Based on original Georeferencer Plugin Developers: Lars Luthman (original Georeferencer) Links: QgsGeorefPluginGui Error Eroare QgsGeorefPluginGuiBase <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">DescriptionThis plugin can generate world files for rasters. You select points on the raster and give their world coordinates, and the plugin will compute the world file parameters. The more coordinates you can provide the better the result will be.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">DescriptionThis plugin can generate world files for rasters. You select points on the raster and give their world coordinates, and the plugin will compute the world file parameters. The more coordinates you can provide the better the result will be.</body></html> Close Închidere ... ... QgsGeorefWarpOptionsDialogBase Warp options Resampling method: Nearest neighbour Linear Cubic OK Use 0 for transparency when needed Compression: QgsGraduatedSymbolDialog Equal Interval Quantiles Empty QgsGraduatedSymbolDialogBase graduated Symbol Classification Field: Atribut pentru clasificare: Mode: Mod: Delete class Classify Classification field Mode Number of classes QgsGrassAttributes Warning Atenţie Column Value Valoare Type Tip Field Atribut ERROR OK Layer QgsGrassAttributesBase GRASS Attributes Tab 1 result Update database record Update Add new category using settings in GRASS Edit toolbox New Noua Delete selected category Delete Ştergere QgsGrassBrowser Tools Add selected map to canvas Copy selected map Rename selected map Delete selected map Set current region to selected map Refresh Actualizează Warning Atenţie Cannot write new region New name Cannot copy map %1@%2 command: %1 %2 %3 %4 Cannot rename map %1 Delete map %1 Cannot delete map %1 QgsGrassEdit Warning Atenţie You are not owner of the mapset, cannot open the vector for editing. Cannot open vector for update. Edit tools New point Punct nou New line New boundary New centroid Centroid nou Move vertex Add vertex Delete vertex Sterge Vertex Move element Split line Delete element Edit attributes Close Închidere Info The table was created Tool not yet implemented. Orphan record was left in attribute table. Delete the record? Cannot delete orphan record: Background Highlight Dynamic Point Punct Line Linie Boundary (no area) Boundary (1 area) Boundary (2 areas) Centroid (in area) Centroid (outside area) Centroid (duplicate in area) Node (1 line) Node (2 lines) Color Column title Culoare Type Column title Tip Index Column title Index Type Tip Length Lungime Next not used Manual entry No category Cannot check orphan record: %1 Cannot describe table for field %1 Left: %1 Middle: %1 Right: %1 QgsGrassEditAddVertex Select line segment Selectează segment New vertex position Poziţie vertex nouă Release Lasă Liber QgsGrassEditAttributes Select element Selectează element QgsGrassEditBase GRASS Edit Category Mode Settings Snapping in screen pixels Symbology Simbolizare Column 1 Coloana 1 Line width Mărimea liniei Marker size Table Add Column Create / Alter Table Layer Disp Color Culoare Type Tip Index Index Column Length Lungime QgsGrassEditDeleteLine Select element Selectează element Delete selected / select next Stergere este selectat Release selected Lăsare liber este selectat QgsGrassEditDeleteVertex Select vertex Selectează vertex Delete vertex Sterge Vertex Release vertex Lasă vertexul liber QgsGrassEditMoveLine Select element Selectează element New location Locaţie nouă Release selected Lăsare liber este selectat QgsGrassEditMoveVertex Select vertex Selectează vertex Select new position Selectează poziţie nouă QgsGrassEditNewLine New vertex Vertex nou New point Punct nou Undo last point Înapoi la starea anterioară Close line Închide linia QgsGrassEditNewPoint New centroid Centroid nou New point Punct nou QgsGrassEditSplitLine Select position on line Selectează poziţia pe linie Split the line Împarte linia Release the line Lăsare liberă a liniei Select point on line Selectează punct pe linie QgsGrassElementDialog Cancel Ok Ok Enter a name! This is name of the source! Exists! Overwrite QgsGrassMapcalc Mapcalc tools Add map Add constant value Add operator or function Add connection Select item Delete selected item Open Save Salvare Save as Addition Subtraction Multiplication Division Modulus Exponentiation Equal Not equal Greater than Greater than or equal Less than Less than or equal And Or Absolute value of x Inverse tangent of x (result is in degrees) Inverse tangent of y/x (result is in degrees) Current column of moving window (starts with 1) Cosine of x (x is in degrees) Convert x to double-precision floating point Current east-west resolution Exponential function of x x to the power y Convert x to single-precision floating point Decision: 1 if x not zero, 0 otherwise Decision: a if x not zero, 0 otherwise Decision: a if x not zero, b otherwise Decision: a if x > 0, b if x is zero, c if x < 0 Convert x to integer [ truncates ] Check if x = NULL Natural log of x Log of x base b Largest value Median value Smallest value Mode value 1 if x is zero, 0 otherwise Current north-south resolution NULL value Random value between a and b Round x to nearest integer Current row of moving window (Starts with 1) Sine of x (x is in degrees) sin(x) Square root of x sqrt(x) Tangent of x (x is in degrees) tan(x) Current x-coordinate of moving window Current y-coordinate of moving window Warning Atenţie Cannot get current region No GRASS raster maps currently in QGIS Cannot create 'mapcalc' directory in current mapset. New mapcalc Enter new mapcalc name: Enter vector name Save mapcalc File name empty Cannot open mapcalc file column coloana Output Rezultat Cannot check region of map %1 Cannot get region of map %1 The file already exists. Overwrite? The mapcalc schema (%1) not found. Cannot open mapcalc schema (%1) Cannot read mapcalc schema (%1): %1 at line %2 column %3 QgsGrassMapcalcBase MainWindow Fereastra Principală Output Rezultat QgsGrassModule Run Rulează Stop Opreste Warning Atenţie column coloana Cannot get input region Use Input Region Successfully finished Finished with error Module crashed or killed Please ensure you have the GRASS documentation installed. Module: %1 The module file (%1) not found. Cannot open module file (%1) Cannot read module file (%1) %1 at line %2 column %3 Module %1 not found Cannot find man page %1 Not available, description not found (%1) Not available, cannot open description (%1) Not available, incorrect description (%1) Input %1 outside current region! Output %1 exists! Overwrite? Cannot find module %1 Cannot start module: %1 QgsGrassModuleBase GRASS Module Options Opţiuni Output Rezultat Manual Run Rulează View output Close Închidere TextLabel QgsGrassModuleField Attribute field QgsGrassModuleFile File Fişier %1: missing value %1: directory does not exist QgsGrassModuleGdalInput Warning Atenţie PostGIS driver in OGR does not support schemas! Only the table name will be used. It can result in wrong input if more tables of the same name are present in the database. Cannot find layeroption %1 Cannot find whereoption %1 %1: no input QgsGrassModuleInput Warning Atenţie Use region of this map Cannot find typeoption %1 Cannot find values for typeoption %1 Cannot find layeroption %1 GRASS element %1 not supported %1: no input Input QgsGrassModuleOption %1: missing value QgsGrassModuleSelection Selected categories QgsGrassModuleStandardOptions Warning Atenţie column coloana Cannot get current region Cannot find module %1 Cannot start module %1 command: %1 %2 %3 %4 Cannot read module description (%1): %1 at line %2 column %3 Cannot find key %1 Item with id %1 not found Cannot check region of map %1 Cannot set region of map %1 QgsGrassNewMapset Database Baza de date Location 2 User's mapset System mapset Location 1 Enter path to GRASS database The directory doesn't exist! Enter location name! The location exists! Selected projection is not supported by GRASS! Warning Atenţie Cannot create projection. Cannot reproject previously set region, default region set. North must be greater than south East must be greater than west column coloana Cannot reproject selected region. Cannot reproject region Enter mapset name. The mapset already exists Database: Location: Mapset: Create location Create mapset Cannot open DEFAULT_WIND Cannot open WIND New mapset New mapset successfully created and set as current working mapset. Cannot create new mapset directory Cannot create QgsCoordinateReferenceSystem No writable locations, the database is not writable! Regions file (%1) not found. Cannot open locations file (%1) Cannot read locations file (%1): %1 at line %2 column %3 Cannot create new location: %1 New mapset successfully created, but cannot be opened: %1 QgsGrassNewMapsetBase Column 1 Coloana 1 Example directory tree: <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">GRASS data are stored in tree directory structure.The GRASS database is the top-level directory in this tree structure.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">GRASS data are stored in tree directory structure.The GRASS database is the top-level directory in this tree structure.</body></html> Database Error Database: ... ... Select existing directory or create a new one: Location Select location Create new location Location Error <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS location is a collection of maps for a particular territory or project.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS location is a collection of maps for a particular territory or project.</body></html> Projection Error Coordinate system Projection Not defined <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</body></html> Set current QGIS extent Set Setare Region Error S W W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) E N N Crează un nou layer tip Vector New mapset: Mapset Error Existing masets seturi harta existente <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</body></html> Location: Mapset: New Mapset GRASS Database Tree Comment <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</body></html> Browse... GRASS Location <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> The GRASS location is a collection of maps for a particular territory or project.</body></html> Default GRASS Region <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</body></html> Mapset Owner <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"> The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</body></html> Create New Mapset QgsGrassPlugin Open mapset New mapset Close mapset Add GRASS vector layer Add GRASS raster layer Open GRASS tools Display Current Grass Region Edit Current Grass Region Edit Grass Vector layer Adds a GRASS vector layer to the map canvas Adds a GRASS raster layer to the map canvas Displays the current GRASS region as a rectangle on the map canvas Edit the current GRASS region Edit the currently selected GRASS vector layer. &GRASS GRASS GrassVector 0.1 0.1 GRASS layer Create new Grass Vector Warning Atenţie GRASS Edit is already running. New vector name New vector created but cannot be opened by data provider. Cannot start editing. GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region. Cannot open GRASS vector: %1 Cannot create new vector: %1 Cannot open vector for update. Cannot read current region: %1 Cannot open the mapset. %1 Cannot close mapset. %1 Cannot close current mapset. %1 Cannot open GRASS mapset. %1 QgsGrassRegion Warning Atenţie GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region. Cannot write region Cannot read current region: %1 QgsGrassRegionBase GRASS Region Settings N N Crează un nou layer tip Vector W W Adăugare layer generat de un Serviciu de Hărţi Web (WMS) E S N-S Res Rows Cols E-W Res Color Culoare Width Lăţime OK Cancel QgsGrassSelect Select GRASS Vector Layer Select GRASS Raster Layer Select GRASS mapcalc schema Select GRASS Mapset Warning Atenţie Cannot open vector on level 2 (topology not available). Choose existing GISDBASE Wrong GISDBASE, no locations available. Wrong GISDBASE Select a map. No map No layer No layers available in this map QgsGrassSelectBase Add GRASS Layer Gisdbase Location Mapset Select or type map name (wildcards '*' and '?' accepted for rasters) Map name Layer Browse Selectaţi Cancel OK QgsGrassShell Close Închidere Ctrl+Shift+V Ctrl+Shift+C QgsGrassShellBase GRASS Shell GRASS Shell Close Închidere QgsGrassTools Browser GRASS Tools Warning Atenţie GRASS Shell is not compiled. column coloana GRASS Tools: %1/%2 The config file (%1) not found. Cannot open config file (%1). Cannot read config file (%1): %1 at line %2 column %3 Cannot start command shell (%1) QgsGrassToolsBase Grass Tools Modules Tree 1 1 Modules List QgsGridMakerPlugin &Graticule Creator &Creator Caroiaj Creates a graticule (grid) and stores the result as a shapefile &Crează un Caroiaj (grid) si il salveaza ca shapefile &Graticules Caroia&je QgsGridMakerPluginGui Choose a filename to save under Alegeţi un nume de fişier pentru salvare QgsGridMakerPluginGuiBase QGIS Plugin Template Matriţă pentru QGIS Plugin <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This plugin will help you to build a graticule shapefile that you can use as an overlay within your qgis map viewer.Please enter all units in decimal degrees</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This plugin will help you to build a graticule shapefile that you can use as an overlay within your qgis map viewer.Please enter all units in decimal degrees</body></html> Type Tip Point Punct Line Linie Polygon Poligon ... ... &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C QgsHelpViewer Quantum GIS Help Error Eroare The QGIS help database is not installed This help file does not exist for your language:%1If you would like to create it, contact the QGIS development team Quantum GIS Help - %1 Failed to get the help text from the database: %1 QgsHelpViewerBase QGIS Help &Close &Închidere Alt+C Alt+C &Home Alt+H &Forward Alt+F &Back Alt+B QgsHttpTransaction WMS Server responded unexpectedly with HTTP Status Code %1 (%2) HTTP response completed, however there was an error: %1 HTTP transaction completed, however there was an error: %1 Network timed out after %1 seconds of inactivity. This may be a problem in your network connection or at the WMS server. Received %1 of %2 bytes Received %1 bytes (total unknown) Not connected Looking up '%1' Connecting to '%1' Sending request '%1' Receiving reply Response is complete Closing down connection Network timed out after %n second(s) of inactivity. This may be a problem in your network connection or at the WMS server. inactivity timeout QgsIDWInterpolatorDialogBase Dialog <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:12pt; font-weight:400; font-style:normal;"> Inverse Distance Weighting The only parameter for the IDW interpolation method is the coefficient that describes the decrease of weights with distance.</body></html> Distance coefficient P: QgsIdentifyResults Feature Value Valoare Run action Executaţi acţiunea (Derived) Identify Results - %1 QgsIdentifyResultsBase Identify Results Help Ajutor F1 F1 Close Închidere QgsInterpolationDialog Triangular interpolation (TIN) Inverse Distance Weighting (IDW) QgsInterpolationDialogBase Output Rezultat ... ... Interpolation plugin Input Input vector layer Use z-Coordinate for interpolation Interpolation attribute Interpolation method Number of columns Number of rows Output file QgsInterpolationPlugin &Interpolation QgsItemPositionDialogBase Set item position Item reference point Coordinates x: y: Set Position Close Închidere QgsLUDialogBase Enter class bounds Lower value - - Elimină toate straturile tematice din Zona de Previzualizare Upper value QgsLabelDialog Auto QgsLabelDialogBase Form1 Form1 Font size units Map units Points Transparency: Transparenta: Font % Placement Pozitionare Below Right Right Below Over Above Left Below Left Above Right Above Left Buffer Buffer size units Size is in map units Size is in points Size: Position Offset units Preview: QGIS Rocks! Field containing label Default label Data defined style Data defined alignment Data defined buffer Data defined position Font transparency Color Culoare Angle (deg) Buffer labels? Buffer size Transparency X Offset (pts) Y Offset (pts) &Font family &Bold &Italic &Underline &Size Size units X Coordinate Y Coordinate Multiline labels? General General Use scale dependent rendering Utilizeaza rasdare in functie de scara Maximum Minimum Minimum scale at which this layer will be displayed. Scara minima la care acest strat va fi afisat. Maximum scale at which this layer will be displayed. Scara maxima la care acest strat va fi afisat. ° &Color QgsLayerProjectionSelectorBase <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Define this layer's projection:This layer appears to have no projection specification. By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Define this layer's projection:This layer appears to have no projection specification. By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.</body></html> QgsLegend group grup &Properties Caracteristici &Zoom to layer extent &Zoomare la dimensiunile stratului &Add to overview Adaugă în Zona de Previzualizare &Remove from overview Elimină din Zona de Previzualizare &Remove Ştergeţi &Make to toplevel item Elementul cel mai de sus &Allow editing Editaţi &Save as shapefile... Salvare ca shapefile... Re&name Redenumire &Add group &Adaugare Grup &Expand all Expansiune &Collapse all Restrangere Show file groups Arata grupurile de fisiere &Open attribute table &Afiseaza Tabela de atribute Allow Editing Editaţi Save as shapefile... Salvare ca shapefile... No Layer Selected Nu există nici un layer selectat To open an attribute table, you must select a vector layer in the legend QgsLegendLayer &Zoom to layer extent &Zoomare la dimensiunile stratului &Zoom to best scale (100%) &Show in overview &Remove Ştergeţi &Open attribute table &Afiseaza Tabela de atribute Save as shapefile... Salvare ca shapefile... Save selection as shapefile... &Properties Caracteristici Multiple layers This item contains multiple layers. Displaying multiple layers in the table is not supported. QgsLegendLayerFile Attribute table - Tabela de atribute- Save layer as... Start editing failed Nu se poate incepe editarea Provider cannot be opened for editing Furnizorul de date nu poate fi accesat pentru editare. Stop editing Încetaţi editarea Do you want to save the changes? Sunteţi sigur că doriţi să salvati? &Yes &Da &No &Nu Error Eroare Could not commit changes Nu se pot salva modificarile efectuate. Problems during roll back Probleme la aducerea in starea anterioara (roll back) Saving done Export to Shapefile has been completed Driver not found ESRI Shapefile driver is not available Error creating shapefile Layer creation failed &Zoom to layer extent &Zoomare la dimensiunile stratului &Show in overview &Remove Ştergeţi &Open attribute table &Afiseaza Tabela de atribute Save as shapefile... Salvare ca shapefile... Save selection as shapefile... &Properties Caracteristici Layer attribute table contains unsupported datatype(s) Select the coordinate reference system for the saved shapefile. The data points will be transformed from the layer coordinate reference system. The shapefile could not be created (%1) QgsLineStyleDialogBase Ok Ok QgsLineStyleWidgetBase Form2 Form2 Colour: Culoare: col col QgsLinearlyScalingDialog Millimeter Map units QgsLinearlyScalingDialogBase Form Scale linearly between 0 and the following attribute value/ diagram size: find maximum Value: Size: Size unit: QgsMapCanvas because deoarece Could not draw %1 because: %2 COMMENTED OUT Could not draw %1 because: %2 QgsMapLayer &Remove Ştergeţi &Properties Caracteristici %1 at line %2 column %3 User database could not be opened. The style table could not be created. The style %1 was saved to database The style %1 was updated in the database. The style %1 could not be updated in the database. The style %1 could not be inserted into database. style not found in database Loading style file %1 failed because: %2 Could not save symbology because: %1 The directory containing your dataset needs to be writeable! Created default style file as %1 ERROR: Failed to created default style file as %1. Check file permissions and retry. QgsMapToolAddFeature Not a vector layer The current layer is not a vector layer 2.5D shape type not supported Adding features to 2.5D shapetypes is not supported yet Layer cannot be added to Stratul nu poate fi adaugat la The data provider for this layer does not support the addition of features. Furnizorul de date corespunzator acestui layer nu suporta adaugarea de obiecte. Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Wrong editing tool Cannot apply the 'capture point' tool on this vector layer Coordinate transform error Cannot transform the point to the layers coordinate system Cannot apply the 'capture line' tool on this vector layer Cannot apply the 'capture polygon' tool on this vector layer Error Eroare Cannot add feature. Unknown WKB type Could not remove polygon intersection QgsMapToolAddIsland Not a vector layer The current layer is not a vector layer Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Error, could not add island Coordinate transform error Cannot transform the point to the layers coordinate system QgsMapToolAddRing Not a vector layer The current layer is not a vector layer Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Coordinate transform error Cannot transform the point to the layers coordinate system A problem with geometry type occured The inserted Ring is not closed The inserted Ring is not a valid geometry The inserted Ring crosses existing rings The inserted Ring is not contained in a feature An unknown error occured Error, could not add ring QgsMapToolDeletePart Delete part This isn't a multipart geometry. Couldn't remove the selected part. QgsMapToolIdentify No features found Nici un obiect nu a fost găsit - %1 features found Identify results window title (clicked coordinate) No active layer Nu există nici un layer activat To identify features, you must choose an active layer by clicking on its name in the legend Band Bandă WMS identify result for %1: %2 Length Lungime Area Suprafaţă action acţiune No features were found in the active layer at the point you clicked Nici un obiect nu a fost găsit in stratul activ, în punctul selectat %1 - %n feature(s) found Identify results window title Could not draw %1 because: %2 COMMENTED OUT Could not identify objects on %1 because: %2 QgsMapToolMoveFeature Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. QgsMapToolSelect No active layer Nu există nici un layer activat To select features, you must choose a vector layer by clicking on its name in the legend CRS Exception Selection extends beyond layer's coordinate system. QgsMapToolSimplify Unsupported operation Multipart features are not supported for simplification. QgsMapToolSplitFeatures Split error An error occured during feature splitting No feature split done If there are selected features, the split tool only applies to the selected ones. If you like to split all features under the split line, clear the selection Not a vector layer The current layer is not a vector layer Layer not editable Layerul nu este editabil Cannot edit the vector layer. To make it editable, go to the file item of the layer, right click and check 'Allow Editing'. Coordinate transform error Cannot transform the point to the layers coordinate system QgsMapToolVertexEdit Snap tolerance Don't show this message again Could not snap segment. Have you set the tolerance in Settings > Project Properties > General? QgsMapserverExport Overwrite File? Yes Da No Nu %1 exists. Do you want to overwrite it? QgsMapserverExportBase Export to Mapserver Map file Export LAYER information only &Help &Ajutor F1 F1 &OK &OK &Cancel &Renunţă ... ... Map Hartă Name Nume Height Înălţime Units Unităţi Image type gif gtiff jpeg png swf userdefined wbmp MinScale MaxScale Prefix attached to map, scalebar and legend GIF filenames created using this MapFile. It should be kept short. Width Lăţime Web Interface Definition Header Footer Template Path to the MapServer template file Prefix attached to map, scalebar and legend GIF filenames created using this MapFile Name for the map file to be created from the QGIS project file Full path to the QGIS project file to export to MapServer map format QGIS project file If checked, only the layer information will be processed Browse... Save As... QgsMarkerDialogBase ... ... Ok Ok QgsMeasureBase Measure Măsurare Total: Total: Help Ajutor New Noua Cl&ose &Închidere Segments QgsMeasureDialog Segments (in meters) Segments (in feet) Segments (in degrees) Segments QgsMeasureTool Incorrect measure results This map is defined with a geographic coordinate system (latitude/longitude) but the map extents suggests that it is actually a projected coordinate system (e.g., Mercator). If so, the results from line or area measurements will be incorrect.To fix this, explicitly set an appropriate map coordinate system using the <tt>Settings:Project Properties</tt> menu. QgsMessageViewer QGIS Message Mesaj QGIS Don't show this message again Nu mai arata acest mesaj inca o data. Close Închidere QgsMySQLProvider Error Eroare QgsNewConnection Test connection Test conexiune Connection to %1 was successfull Conectarea la %1 a fost incununata de succes. Connection failed - Check settings and try again. Extended error information: Conectare eşuată. Informaţii suplimentare cu privire la eroare: Connection to %1 was successful Connection failed - Check settings and try again. Extended error information: %1 prefer require allow disable QgsNewConnectionBase Create a New PostGIS connection Crează o nouă conexiune PostGIS Connection Information Informaţii conexiune <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">Restrict the search to the public schema for spatial tables not in the geometry_columns table</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">Restrict the search to the public schema for spatial tables not in the geometry_columns table</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:12pt; font-weight:400; font-style:normal; text-decoration:none;">When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)</body></html> Only look in the 'public' schema considera doar schema 'public' <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Restrict the displayed tables to those that are in the geometry_columns table</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Restrict the displayed tables to those that are in the geometry_columns table</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Restricts the displayed tables to those that are in the geometry_columns table. This can speed up the initial display of spatial tables.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Restricts the displayed tables to those that are in the geometry_columns table. This can speed up the initial display of spatial tables.</body></html> Only look in the geometry_columns table Considera doar tabela geometry_columns Save Password Salvare parola Test Connect Test conexiune Name Nume Host Adresă (host) Database Baza de date Port Port Username Nume Utilizator (Login) Password Parola Name of the new connection Numele conexiunii noi 5432 5432 OK Ok Cancel Renuţare Help Ajutor F1 F1 Restrict the search to the public schema for spatial tables not in the geometry_columns table When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time) Restrict the displayed tables to those that are in the geometry_columns table Restricts the displayed tables to those that are in the geometry_columns table. This can speed up the initial display of spatial tables. SSL mode QgsNewHttpConnectionBase Connection Information Informaţii conexiune Name of the new connection Numele conexiunii noi Name Nume URL HTTP address of the Web Map Server Help Ajutor F1 F1 Create a new WMS connection Connection details If the WMS requires basic authentication, enter a user name and optional password User name Password Parola QgsNewOgrConnection Test connection Test conexiune Connection failed - Check settings and try again. Extended error information: %1 Connection to %1 was successful QgsNewOgrConnectionBase Create a New OGR Database connection Connection Information Informaţii conexiune Save Password Test Connect Test conexiune <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> Type</body></html> Name Nume Host Adresă (host) Database Baza de date Port Port Username Nume Utilizator (Login) Password Parola Name of the new connection Numele conexiunii noi OK Cancel Help Ajutor F1 F1 QgsNorthArrowPlugin Bottom Left Stanga jos Top Left Stanga sus Top Right Dreapta sus Bottom Right Dreapta jos &North Arrow Creates a north arrow that is displayed on the map canvas &Decorations &Decoratii North arrow pixmap not found QgsNorthArrowPluginGui Pixmap not found QgsNorthArrowPluginGuiBase North Arrow Plugin Properties Angle Unghi Placement Pozitionare Set direction automatically Enable North Arrow Placement on screen Top Left Stanga sus Top Right Dreapta sus Bottom Left Stanga jos Bottom Right Dreapta jos Preview of north arrow Icon ... ... &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C Browse... QgsOGRSublayersDialogBase Select OGR layers to load Sub layers list <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"> This is the list of all layers available in the datasource of the active layer. You can select the layers to load. The layers will be loaded when you press "OK". The layer name is format dependant. Consult the OGR documentation or the documentation of your data format to determine the nature of the included information. Be advised: selecting an already opened layer will not generate an error message and the layer will end up loaded twice!</body></html> 1 1 QgsOpenVectorLayerDialog Open an OGR Supported Vector Layer Deschide un strat accesat de OGR Open Directory Are you sure you want to remove the %1 connection and all associated settings? Confirm Delete Confirma stergerea Password for Please enter your password: QgsOpenVectorLayerDialogBase Add vector layer Source type File Fişier Directory Database Baza de date Protocol Encoding : BIG5 BIG5-HKSCS EUCJP EUCKR GB2312 GBK GB18030 JIS7 SHIFT-JIS TSCII UTF-8 UTF-16 KOI8-R KOI8-U ISO8859-1 ISO8859-2 ISO8859-3 ISO8859-4 ISO8859-5 ISO8859-6 ISO8859-7 ISO8859-8 ISO8859-8-I ISO8859-9 ISO8859-10 ISO8859-11 ISO8859-12 ISO8859-13 ISO8859-14 ISO8859-15 IBM 850 IBM 866 CP874 CP1250 CP1251 CP1252 CP1253 CP1254 CP1255 CP1256 CP1257 CP1258 Apple Roman TIS-620 Type Tip URI Source Dataset Browse Selectaţi Connections New Noua Edit Editare Delete Ştergere QgsOptions to vertex to segment to vertex and segment Semi transparent circle Cross Cruce Detected active locale on your system: %1 None Niciunul/Niciuna map units pixels Central point (fastest) Chain (fast) Popmusic tabu chain (slow) Popmusic tabu (slow) Popmusic chain (very slow) QgsOptionsBase QGIS Options Hide splash screen at startup Note: Theme changes take effect the next time QGIS is started &Rendering Map display will be updated (drawn) after this many features have been read from the data source By default new la&yers added to the map should be displayed Make lines appear less jagged at the expense of some drawing performance <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Selecting this will unselect the 'make lines less' jagged toggle</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Selectarea acetei optiuni va deselecta otiunea de a face liniile mai putin in scari</body></html> Fix problems with incorrectly filled polygons &Map tools Search radius <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;"> Note: Specify the search radius as a percentage of the map width. </body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Nota: Specificati raza de cautare ca procent din latimea hartii.</body></html> % Measure tool Panning and zooming Zoom Zoom and recenter Nothing Select Global Default ... ... ... &Ok &OK Alt+O Alt+O &Cancel &Renunţă &General General General Locale Locale to use instead Additional Info Detected active locale on your system: Selecting this will unselect the 'make lines less' jagged toggle Digitizing Digitizare Rubberband Line width in pixels Snapping Zoom to mouse cursor Project files Prompt to save project changes when required Warn when opening a project file saved with an older version of QGIS Default Map Appearance (overridden by project properties) Selection color Background color &Application Icon theme Capitalise layer names in legend Display classification attribute names in legend Rendering behavior Number of features to draw before updating the display Note: Use zero to prevent display updates until all features have been rendered Rendering quality Zoom factor Mouse wheel action Rubberband color Ellipsoid for distance calculations Note: Specify the search radius as a percentage of the map width Search radius for identifying features and displaying map tips Line width Mărimea liniei Line colour Default snap mode Default snapping tolerance in layer units Search radius for vertex edits in layer units Vertex markers Marker style Override system locale Note: Enabling / changing overide on local requires an application restart Proxy Use proxy for web access Host Adresă (host) Port Port User Leave this blank if no proxy username / password are required Password Parola Open attribute table in a dock window CRS When layer is loaded that has no coordinate reference system (CRS) Prompt for CRS Project wide default CRS will be used Global default CRS displa&yed below will be used Enter attribute values Suppress attributes pop-up windows after each created feature Proxy type Exclude URLs: Add Adauga Remove Ştergeţi Overlay Position Placement algorithm: map units pixels QgsOraclePlugin Select GeoRaster Open a Oracle Spatial GeoRaster &Oracle Spatial QgsOracleSelectGeoraster Are you sure you want to remove the %1 connection and all associated settings? Confirm Delete Confirma stergerea Password for %1/<password>@%2 Please enter your password: Open failed The connection to %1 failed. Please verify your connection parameters. Make sure you have the GDAL GeoRaster plugin installed. QgsPasteTransformationsBase Paste Transformations Note: This function is not useful yet! Source Destination &Help &Ajutor F1 F1 Add New Transfer &OK &OK &Cancel &Renunţă QgsPatternDialogBase Ok Ok QgsPgGeoprocessing &Buffer features &Geoprocessing Buffer features in layer %1 Unable to add geometry column Unable to create table Error connecting to the database No GEOS support Buffer function requires GEOS support in PostGIS No Active Layer You must select a layer in the legend to buffer Not a PostgreSQL/PostGIS Layer Create a buffer for a PostgreSQL layer. A new layer is created in the database with the buffered features. Unable to add geometry column to the output table %1-%2 Failed to create the output table %1 %1 is not a PostgreSQL/PostGIS layer. Geoprocessing functions are only available for PostgreSQL/PostGIS Layers QgsPgQueryBuilder Table %1 in database %2 on host %3, user %4 Connection Failed Database error Query Result Query Failed No Records The query you specified results in zero records being returned. Valid PostgreSQL layers must have at least one feature. No Query You must create a query before you can test it Error in Query Connection to the database failed: %1 Failed to get sample of field values using SQL:%1Error message was: %2 The where clause returned %n row(s). returned test rows An error occurred when executing the query: %1 QgsPgQueryBuilderBase PostgreSQL Query Builder Clear Test Test Ok Ok Cancel Values All Sample Fields Operators = IN NOT IN < < > > % <= >= != LIKE AND ILIKE OR NOT SQL where clause <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> Retrieve all the record in the vector file (if the table is big, the operation can consume some time)</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> Take a sample of records in the vector file</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> List of values for the current field.</body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> List of fields in this vector file</body></html> Datasource QgsPluginInstallerDialogBase QGIS Python Plugin Installer Plugins Plugin-uri List of available and installed plugins Filter: Display only plugins containing this word in their metadata Display only plugins from given repository all repositories Display only plugins with matching status Status Starea actuala Name Nume Version Versiune Description Descriere: Author Repository Install, reinstall or upgrade the selected plugin Install/upgrade plugin Uninstall the selected plugin Uninstall plugin Repositories List of plugin repositories URL Check for updates on startup Add third party plugin repositories to the list Add 3rd party repositories Add a new plugin repository Add... Edit the selected repository Edit... Remove the selected repository Delete Ştergere The plugins will be installed to ~/.qgis/python/plugins Close the Installer window Close Închidere Options Opţiuni Configuration of the plugin installer every time QGIS starts once a day every 3 days every week every 2 weeks every month <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"> Note: If this function is enabled, Quantum GIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Installer window.</body></html> Allowed plugins Only show plugins from the official repository Show all plugins except those marked as experimental Show all plugins, even those marked as experimental <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"> Note: Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</body></html> QgsPluginInstallerFetchingDialog Error Eroare QgsPluginInstallerFetchingDialogBase Fetching repositories Overall progress: Abort fetching Repository State QgsPluginInstallerInstallingDialog Error Eroare QgsPluginInstallerInstallingDialogBase QGIS Python Plugin Installer Installing plugin: Connecting... QgsPluginInstallerPluginErrorDialogBase Error loading plugin The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below: Do you want to uninstall this plugin now? If you're unsure, probably you would like to do this. QgsPluginInstallerRepositoryDetailsDialogBase Repository details Name: Nume: Enter a name for the repository URL: Enter the repository URL, beginning with "http://" Enable or disable the repository (disabled repositories will be omitted) Enabled QgsPluginManager Choose a directory Alegeti un director No Plugins Nu există Plugin-uri No QGIS plugins found in Nu s-a gasit nici un pluginul QGIS in: Name Nume Version Versiune Description Descriere: &Select All Selectaţi tot &Clear All [ incompatible ] No QGIS plugins found in %1 Error Eroare Failed to open plugin installer! QgsPluginManagerBase QGIS Plugin Manger Administrare plugin-uri QGIS Plugin Directory Director Plugin-uri ... ... Name Nume Version Versiune Description Descriere: Library Name Numele Librăriei To load a plugin, click the checkbox next to the plugin and click Ok Pentru a incarca un plugin, selectati-l si apoi apasati OK &Select All Selectaţi tot Alt+S Alt+S C&lear All Dese&lectati tot Alt+L Alt+L &Ok &OK Alt+O Alt+O &Close &Închidere Alt+C Alt+C QGIS Plugin Manager To enable / disable a plugin, click its checkbox or description &Filter Plugin Directory: Directory Plugin Installer QgsPointDialog Zoom In Apropiere z Zoom Out Depărtare Z Zoom To Layer Focusare pe Layer Zoom to Layer Focusare pe Layer Pan Map Mişcare hartă Pan the map Mişcare hartă Add Point . . Vectorizare Punct Capture Points Vectorizare Punct Delete Point Delete Selected Sterge Obiecte Selectate Linear Helmert Choose a name for the world file Warning Atenţie Affine Not implemented! An affine transform requires changing the original raster file. This is not yet supported. Error Eroare Currently all modified files will be written in TIFF format. A Helmert transform requires modifications in the raster layer.The modified raster will be saved in a new file and a world file will be generated for this new file instead.Are you sure that this is what you want? -modified Georeferencer:QgsPointDialog.cpp - used to modify a user given file name Select GCPs file GCPs points (*.points) Information GCPs was not loaded. Error! Modified raster file exists! Overwrite it? World file exists Polynomial 1 A Polynomial transform requires changing the raster layer.The changed raster will be saved in a new file and a world file will be generated for this new file instead.Are you sure that this is what you want? Requires at least 3 points Polynomial 2 Requires at least 6 points Polynomial 3 Requires at least 10 points Thin plate spline (TPS) Failed to compute GCP transform: Transform is not solvable. Choose a raster file Raster files (*.*) The selected file is not a valid raster file. The selected file already seems to have a world file! Do you want to replace it with the new world file? The %1 transform is not yet supported. Could not write to %1 QgsPointDialogBase Add points Delete points Zoom in Zoom out Zoom to the raster extents Pan ... ... Modified raster: World file: Transform type: Reference points Create Creaza Create and load layer Raster file: Close Închidere Save GCPs Load GCPs QgsPointStyleWidgetBase Form3 Form3 Scale Scară QgsPostgresProvider Unable to access relation No suitable key column in table and Unable to find a key column and is suitable. and has a suitable constraint) and does not have a suitable constraint) No suitable key column in view Unknown geometry type Unable to get feature type and srid Error while adding features Error while deleting features Error while adding attributes Error while deleting attributes Error while changing attributes Error while changing geometry values unexpected PostgreSQL error Unable to access the %1 relation. The error message from the database was: %1. SQL: %2 Unable to determine table access privileges for the %1 relation. The unique index on column '%1' is unsuitable because Qgis does not currently support non-int4 type columns as a key into the table. The unique index based on columns %1 is unsuitable because Qgis does not currently support multiple columns as a key into the table. '%1' derives from '%2.%3.%4' and is not suitable (type is %1) Note: '%1' initially appeared suitable but does not contain unique data, so is not suitable. The view '%1.%2' has no column suitable for use as a unique key. Qgis requires that the view has a column that can be used as a unique key. Such a column should be derived from a table column of type int4 and be a primary key, have a unique constraint on it, or be a PostgreSQL oid column. To improve performance the column should also be indexed. The view you selected has the following columns, none of which satisfy the above conditions: Column %1 in %2 has a geometry type of %3, which Qgis does not currently support. Qgis was unable to determine the type and srid of column %1 in %2. The database communication log was: The table has no column suitable for use as a key. Qgis requires that the table either has a column of type int4 with a unique constraint on it (which includes the primary key), has a PostgreSQL oid column or has a ctid column with a 16bit block number. QgsPostgresProvider::Conn No GEOS Support! Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net) No PostGIS Support! Your database has no working PostGIS support. QgsProject Unable to open %1 Project file read error: %1 at line %2 column %3 %1 for file %2 Unable to save to file %1 %1 is not writeable. Please adjust permissions (if possible) and try again. Unable to save to file %1. Your project may be corrupted on disk. Try clearing some space on the volume and check file permissions before pressing save again. QgsProjectPropertiesBase Project Properties General General Descriptive project name Default project title Meters Feet Decimal degrees Precision Precizie Automatically sets the number of decimal places in the mouse position display The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display Automatic Sets the number of decimal places to use for the mouse position display Manual The number of decimal places for the manual option decimal places Digitizing Digitizare &Help &Ajutor F1 F1 &Apply &Aplica Alt+A Alt+A &OK &OK &Cancel &Renunţă Enable topological editing Snapping options... Avoid intersections of new polygons Title and colors Project title Selection color Background color Map units Coordinate Reference System (CRS) Enable 'on the fly' CRS transformation QgsProjectionSelector User Defined Coordinate Systems Geographic Coordinate Systems Projected Coordinate Systems Resource Location Error Error reading database file from: %1 Because of this the projection selector will not work... QgsProjectionSelectorBase Search Căutare Find Name Nume EPSG ID Spatial Reference System Sistem de referinta spatial Id Id Coordinate Reference System Selector Coordinate Reference System Sistem de referinta spatial EPSG ID CRS ID : 100000 CRS ID : 3344 CRS ID : whatever QgsPublishToWebDialogBase Publish current project to web Publică proiectul curent pe Internet Publish Publică Cancel Renunţare Server Server Path to QGIS WMS server directory: Calea către directorul serverului QGIS WMS: Enter root password: Introduceţi parola pentru root: Project name: Nume Proiect: QgsPublishToWebPlugin &Publish to web &Publică pe Internet QgsPythonDialog Python console >>> To access Quantum GIS environment from this python console use object from global scope which is an instance of QgisInterface class. Usage e.g.: iface.zoomFull() &Execute &Previous &Next <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> </body></html> QgsQuickPrint km mm cm m miles mile inches foot feet degree degrees unknown Please wait while your report is generated COMMENTED OUT QgsRasterLayer and all other files şi toate celelalte fişiere Not Set Nu este setat Raster Extent: Dimensiuni raster: Clipped area: Suprafaţa taiată: <center>Transparency</center> <center>Transparenta </center> Driver: Driver: Dataset Description Descriere set date Dimensions: Dimensiuni: X: X: Y: Y: Bands: Benzi: No Data Value Valoare pentru No-Data: Data Type: Tip date: GDT_Byte - Eight bit unsigned integer GDT_Byte GDT_UInt16 - Sixteen bit unsigned integer GDT_UInt16 GDT_Int16 - Sixteen bit signed integer GDT_Int16 GDT_UInt32 - Thirty two bit unsigned integer GDT_UInt32 GDT_Int32 - Thirty two bit signed integer GDT_Int32 GDT_Float32 - Thirty two bit floating point GDT_Float32 GDT_Float64 - Sixty four bit floating point GDT_Float64 GDT_CInt16 - Complex Int16 GDT_CInt16 GDT_CInt32 - Complex Int32 GDT_CInt32 GDT_CFloat32 - Complex Float32 GDT_CFloat32 GDT_CFloat64 - Complex Float64 GDT_CFloat64 Could not determine raster data type. Nu s-a putut stabili tipul rasterului. Pyramid overviews: Previzualizare piramida Layer Spatial Reference System: Sistemul de referinta spatial al acestui layer: Project Spatial Reference System: Sistemul de referinta spatial al proiectului: Origin: Origine: Pixel Size: Mărimea pixelului Band Statistics (if gathered): Statistici bandă (dacă există) Property Caracteristică Value Valoare Band Bandă Band No Nr. Bandă No Stats Statistici bandă inexistente No stats collected yet Statisticile benzii nu au fost colectate inca Min Val Valoare Min Max Val Valoare Max Range Raza Mean Media Sum of squares Suma pătratelor Standard Deviation Abaterea standard Sum of all cells Suma tuturor celulelor Cell Count Nr. celulelor Write access denied Access tip scriere nu este permis Write access denied. Adjust the file permissions and try again. Access tip scriere nu este permis. Modificaţi permisiunile fişierului si încercaţi din nou. Building pyramids failed. Construcţia piramidelor a eşuat. The file was not writeable. Some formats can not be written to, only read. You can also try to check the permissions and then try again. Fişierul nu poate fi scris. Anumite formate nu pot fi decat citite, nu şi scrise. Puteti verifica si permisiunile fisierului pentru orice eventualitate. Average Magphase Media Magphase Average Media Building pyramid overviews is not supported on this type of raster. Construcţia piramidelor nu este posibilă pentru acest tip de rater. out of extent in afara dimensiunilor null (no data) null (lipsă date) NoDataValue not set Band %1 %1 and all other files (*) X: %1 Y: %2 Bands: %3 QgsRasterLayer created Retrieving stats for %1 Calculating stats for %1 Retrieving using %1 QgsRasterLayerProperties Grayscale Scara de gri Pseudocolor Pseudo-culoare Freak Out Freak Out Not Set Nu este setat Palette Paleta de culori Columns: Coloane: Rows: Rînduri: No-Data Value: Valoare pentru No-Data: n/a nedisponibil <h3>Multiband Image Notes</h3>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:<ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul> <h3>Multiband Image Notes</h3>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:<ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul> <h3>Paletted Image Notes</h3> This image uses a fixed color palette. You can remap these colors in different combinations e.g.<ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul> <h3>Paletted Image Notes</h3> This image uses a fixed color palette. You can remap these colors in different combinations e.g.<ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul> <h3>Grayscale Image Notes</h3> You can remap these grayscale colors to a pseudocolor image using an automatically generated color ramp. <h3>Note la Imagine Grayscale</h3> Write access denied Access tip scriere nu este permis Write access denied. Adjust the file permissions and try again. Access tip scriere nu este permis. Modificaţi permisiunile fişierului si încercaţi din nou. Building pyramids failed. Construcţia piramidelor a eşuat. The file was not writeable. Some formats can not be written to, only read. You can also try to check the permissions and then try again. Fişierul nu poate fi scris. Anumite formate nu pot fi decat citite, nu şi scrise. Puteti verifica si permisiunile fisierului pentru orice eventualitate. Building pyramid overviews is not supported on this type of raster. Construcţia piramidelor nu este posibilă pentru acest tip de rater. No Stretch Stretch To MinMax Stretch And Clip To MinMax Clip To MinMax Discrete Equal interval Quantiles Description Descriere: Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Red Green Blue Percent Transparent Gray Gri Indexed Value User Defined No-Data Value: Not Set Save file Textfile (*.txt) QGIS Generated Transparent Pixel Value Export File Open file Import Error The following lines contained errors Read access denied Read access denied. Adjust the file permissions and try again. Color Ramp Default Style QGIS Layer Style File (*.qml) QGIS Colormap Linear Exact Please note that building internal pyramids may alter the original data file and once created they cannot be removed! Please note that building internal pyramids could corrupt your image - always make a backup of your data first! The file was not writeable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt. Custom color map entry QGIS Generated Color Map Export File Load Color Map Saved Style The color map for Band %n failed to load Building internal pyramid overviews is not supported on raster layers with JPEG compression. Note: Minimum Maximum values are estimates or user defined Note: Minimum Maximum values are actual values computed from the band(s) <h3>Multiband Image Notes</h3>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:<ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul> COMMENTED OUT <h3>Multiband Image Notes</h3>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:<ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul> <h3>Paletted Image Notes</h3> This image uses a fixed color palette. You can remap these colors in different combinations e.g.<ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul> COMMENTED OUT <h3>Paletted Image Notes</h3> This image uses a fixed color palette. You can remap these colors in different combinations e.g.<ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul> <h3>Grayscale Image Notes</h3> You can remap these grayscale colors to a pseudocolor image using an automatically generated color ramp. COMMENTED OUT <h3>Note la Imagine Grayscale</h3> Default R:%1 G:%2 B:%3 Columns: %1 Rows: %1 No-Data Value: %1 Write access denied. Adjust the file permissions and try again. The following lines contained errors %1 The color map for band %1 failed to load Unknown style format: %1 QgsRasterLayerPropertiesBase Raster Layer Properties Caracteristici ale stratului Raster Symbology Simbolizare Display Afisare Transparency: Transparenta: Full Total 0% 0% None Niciunul/Niciuna Grayscale Image Imagine gri Color Image Imagine Color Invert Color Map Paleta de culori inversata <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif"> Notes </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif">Note</body></html> Blue Albastru Green Verde Red Roşu Band Bandă Color Culoare Color Map Paleta de culori Std Deviations Abaterea standard Gray Gri General General Thumbnail Iconita Legend: Legendă: Palette: Paleta de culori Display Name: Afisare nume Layer Source: Sursa Strat Columns: Coloane: Rows: Rînduri: No Data: No Data: DebugInfo DebugInfo Scale Dependent Visibility Vizibilitate dependenta de scara Maximum scale at which this layer will be displayed. Scara maxima la care acest strat va fi afisat. Maximum 1: Maximum 1: Minimum scale at which this layer will be displayed. Scara minima la care acest strat va fi afisat. Minimum 1: Minimum 1: Spatial Reference System Sistem de referinta spatial Change Schimba Metadata Metadate Pyramids Piramide Pyramid Resolutions Rezoluţie piramida <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif"> Description Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed. Please note that building pyramids could corrupt your image - always make a backup of your data first! </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif">DescriptionLarge resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed.Please note that building pyramids could corrupt your image - always make a backup of your data first!</body></html> Resampling Method Metoda de Resampling Average Media Nearest Neighbour cel mai apropiat vecin Build Pyramids Construieşte piramide Histogram Histograma Options Opţiuni Column Count: Nr. coloane: Out Of Range OK? Afara din raza ok? Allow Approximation Permite aproximarea Chart Type Tip de diagrama Line Graph Diagrama tip linie Bar Chart Diagrame cu bare Refresh Actualizează &Help &Ajutor F1 F1 &Apply &Aplica Alt+A Alt+A &OK &OK &Cancel &Renunţă <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif"> Description Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed. Please note that building pyramids could corrupt your image - always make a backup of your data first! </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:9pt;font-family:Sans Serif">DescriptionLarge resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed.Please note that building pyramids could corrupt your image - always make a backup of your data first!</body></html> {1"?} {9p?} {18p?} {14p?} {600"?} {0000"?} {0000"?} <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif"> Notes </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif">Note</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif"> Description Large resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed. Please note that building pyramids could corrupt your image - always make a backup of your data first! </body></html> <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif">DescriptionLarge resolution raster layers can slow navigation in QGIS. By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom. You must have write access in the directory where the original data is stored to build pyramids. Please note that building pyramids may alter the original data file and once created they cannot be removed.Please note that building pyramids could corrupt your image - always make a backup of your data first!</body></html> {1"?} {10p?} {18p?} {15p?} {600"?} {0000"?} {0000"?} Max Max Min Min 00% Render as ... ... Colormap Delete entry Classify 1 1 2 2 Single band gray Three band color RGB mode band selection and scaling Red band Green band Blue band Custom min / max values Red min Red max Green min Green max Blue min Blue max Single band properties Gray band Color map Invert color map Use standard deviation Note: Load min / max values from band Estimate (faster) Actual (slower) Load Contrast enhancement Current Save current contrast enhancement algorithm as default. This setting will be persistent between QGIS sessions. Saves current contrast enhancement algorithm as a default. This setting will be persistent between QGIS sessions. Default TextLabel Transparency Global transparency No data value Reset no data value Custom transparency options Transparency band Transparent pixel list Add values manually Add Values from display Remove selected row Default values Import from file Export to file Number of entries Color interpolation Classification mode Scale dependent visibility Maximum Minimum Layer source Display name Afisare nume Pyramid resolutions Resampling method Build pyramids Line graph Bar chart Column count Out of range OK? Allow approximation Restore Default Style Save As Default Load Style ... Save Style ... Default R:1 G:2 B:3 Add entry Sort Load color map from band Load color map from file Export color map to file Generate new color map Coordinate reference system Change ... Schimba ... Legend Legendă Palette Paleta de culori Notes Build pyramids internally if possible <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"> </body></html> QgsRunProcess Done Action Starting %1... Unable to run command %1 Unable to run command %1 QgsSOSSourceSelect Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea QgsSOSSourceSelectBase Server Connections Conexiuni Server &New &Nou Delete Ştergere Edit Editare C&onnect Conectare Name Nume Id Id QgsSVGDiagramFactoryWidget Select svg file Select new preview directory Creating icon for file %1 QgsSVGDiagramFactoryWidgetBase Form Search directories Add... Remove Ştergeţi SVG Preview Browse... QgsScaleBarPlugin Bottom Left Stanga jos Top Left Stanga sus Top Right Dreapta sus Bottom Right Dreapta jos Tick Down Tick Up Bar Box &Scale Bar Creates a scale bar that is displayed on the map canvas &Decorations &Decoratii metres/km feet degrees km mm cm m foot degree unknown feet/miles miles mile inches QgsScaleBarPluginGuiBase Scale Bar Plugin &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C Click to select the colour Size of bar: Automatically snap to round number on resize Colour of bar: Top Left Stanga sus Top Right Dreapta sus Bottom Left Stanga jos Bottom Right Dreapta jos Enable scale bar Scale bar style: Select the style of the scale bar Tick Down Tick Up Box Bar Placement: <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This plugin draws a scale bar on the map. Please note the size option below is a 'preferred' size and may have to be altered by QGIS depending on the level of zoom. The size is measured according to the map units specified in the project properties.</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">This plugin draws a scale bar on the map. Please note the size option below is a 'preferred' size and may have to be altered by QGIS depending on the level of zoom. The size is measured according to the map units specified in the project properties.</body></html> QgsSearchQueryBuilder Found %d matching features. No matching features found. Nu au fost găsite caracteristici corespunzătoare. Search results Căutare în rezultate Search string parsing error Eroarea la analizarea criteriului de căutare No Records The query you specified results in zero records being returned. Search query builder Found %n matching feature(s). test result QgsServerSourceSelect Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea Yes Da No Nu WMS Provider Could not open the WMS Provider Select Layer Coordinate Reference System Sistem de referinta spatial There are no available coordinate reference system for the set of layers you've selected. Coordinate Reference System (%1 available) WMS proxies Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog. Are you sure you want to remove the %1 connection and all associated settings? Coordinate Reference System (%n available) crs count Could not understand the response. The %1 provider said: %2 COMMENTED OUT Could not understand the response. The %1 provider said: %2 You must select at least one leaf layer first. The %1 connection already exists. Do you want to overwrite it? Confirm Overwrite WMS Password for %1 QgsServerSourceSelectBase Add Layer(s) from a Server Server Connections Conexiuni Server Adds a few example WMS servers Add default servers C&onnect Conectare Edit Editare Delete Ştergere &New &Nou Coordinate Reference System Sistem de referinta spatial Change ... Schimba ... Ready Gata &Add &Adauga Alt+A Alt+A Layers Layere (Straturi) ID Name Nume Title Titlu Abstract Rezumat Image encoding Help Ajutor F1 F1 C&lose &Închidere Alt+L Alt+L Servers Server Search Search Căutare URL Description Descriere: Add selected row to WMS list QgsShapeFile The database gave an error while executing this SQL: ... (rest of SQL trimmed) is appended to a truncated SQL statement Scanning The database gave an error while executing this SQL: %1 The error was: %2 The error was: %1 QgsSingleSymbolDialog Solid Line Dash Line Dot Line Dash Dot Line Dash Dot Dot Line No Pen No Brush Solid Horizontal Orizontal Vertical Vertical Cross Cruce BDiagonal FDiagonal Diagonal X Dense1 Dense2 Dense3 Dense4 Dense5 Dense6 Dense7 Texture QgsSingleSymbolDialogBase Single Symbol Simbol Unic Outline Width: Dimensiuni linie exterioară: Point Punct Size Dimensiuni Point Symbol Area scale field Rotation field Style Options ... ... Outline style Outline color Outline width Fill color Fill style Label QgsSnappingDialog to vertex to segment to vertex and segment map units pixels QgsSnappingDialogBase Snapping options Layer Mode Tolerance Units Unităţi QgsSpatiaLiteProvider SQLite error: %1 SQL: %2 QgsSpatiaLiteProvider::SqliteHandles Failure while connecting to: %1 %2 QgsSpatiaLiteSourceSelect Wildcard RegExp All Table Type Tip Geometry column SpatiaLite DB Open Error Failure while connecting to: %1 %2 seems to be a valid SQLite DB, but not a SpatiaLite's one ... unknown error cause @ Choose a SpatiaLite/SQLite DB to open Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea Select Table You must select a table in order to add a Layer. SpatiaLite getTableInfo Error Failure exploring tables from: %1 %2 Are you sure you want to remove the %1 connection and all associated settings? QgsSpatiaLiteSourceSelectBase Add SpatiaLite Table(s) SpatiaLite DBs Delete Ştergere New Noua Connect Conectare Help Ajutor F1 F1 Add Adauga Close Închidere Search: Search mode: Search in columns: Search options... QgsSpatiaLiteTableModel Table Type Tip Geometry column Point Punct Multipoint Line Linie Multiline Polygon Poligon Multipolygon QgsSpit File Name Feature Class Features DB Relation Name Schema Confirm Delete Confirma stergerea Yes Da No Nu Add Shapefiles Shapefiles (*.shp);;All files (*.*) The following Shapefile(s) could not be loaded: REASON: File cannot be opened REASON: One or both of the Shapefile files (*.dbf, *.shx) missing General Interface Help: PostgreSQL Connections: [New ...] - create a new connection [Edit ...] - edit the currently selected connection [Remove] - remove the currently selected connection -you need to select a connection that works (connects properly) in order to import files -when changing connections Global Schema also changes accordingly Shapefile List: [Add ...] - open a File dialog and browse to the desired file(s) to import [Remove] - remove the currently selected file(s) from the list [Remove All] - remove all the files in the list [SRID] - Reference ID for the shapefiles to be imported [Use Default (SRID)] - set SRID to -1 [Geometry Column Name] - name of the geometry column in the database [Use Default (Geometry Column Name)] - set column name to 'the_geom' [Import] - import the current shapefiles in the list [Quit] - quit the program [Help] - display this help dialog Import Shapefiles You need to specify a Connection first Connection failed - Check settings and try again PostGIS not available The chosen database does not have PostGIS installed, but this is required for storage of spatial data. You need to add shapefiles to the list first Importing files Cancel Progress Problem inserting features from file: Import Shapefiles - Relation Exists %1 of %2 shapefiles could not be imported. Please enter your password: Are you sure you want to remove the [%1] connection and all associated settings? [Global Schema] - set the schema for all files to be imported into Password for %1 %1 Invalid table name. %1 No fields detected. %1 The following fields are duplicates: %2 Importing files %1 %1 Error while executing the SQL:%2The database said:%3 The Shapefile: %1 will use [%2] relation for its data, which already exists and possibly contains data. To avoid data loss change the "DB Relation Name" for this Shapefile in the main dialog file list. Do you want to overwrite the [%2] relation? QgsSpitBase SPIT - Shapefile to PostGIS Import Tool Add a shapefile to the list of files to be imported Add Adauga Remove the selected shapefile from the import list Remove Ştergeţi Remove all the shapefiles from the import list Remove All Set the SRID to the default value Set the geometry column name to the default value Global Schema PostgreSQL Connections Conexiuni PostGIS Create a new PostGIS connection New Noua Remove the current PostGIS connection Connect Conectare Edit the current PostGIS connection Edit Editare Help Ajutor Close Închidere Import options and shapefile list Use Default SRID or specify here Use Default Geometry Column Name or specify here Primary Key Column Name Connect to PostGIS QgsSpitPlugin &Import Shapefiles to PostgreSQL Import shapefiles into a PostGIS-enabled PostgreSQL database. The schema and field names can be customized on import &Spit QgsTINInterpolatorDialog Linear interpolation QgsTINInterpolatorDialogBase Triangle based interpolation <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:12pt; font-weight:400; font-style:normal;"> This interpolator provides different methods for interpolation in a triangular irregular network (TIN).</body></html> Interpolation method: QgsUniqueValueDialog Confirm Delete Confirma stergerea The classification field was changed from '%1' to '%2'. Should the existing classes be deleted before classification? QgsUniqueValueDialogBase Form1 Form1 Classification Field: Atribut pentru clasificare: Classify Classification field Add class Delete classes Randomize Colors Reset Colors QgsVectorLayer Attribute table - Tabela de atribute- Invert Selection... Invesare Selectie... Abort Renunta &Open attribute table &Afiseaza Tabela de atribute Allow Editing Editaţi Save as shapefile... Salvare ca shapefile... Layer cannot be added to Stratul nu poate fi adaugat la The data provider for this layer does not support the addition of features. Furnizorul de date corespunzator acestui layer nu suporta adaugarea de obiecte. Layer not editable Layerul nu este editabil The current layer is not editable. Choose 'Start editing' in the digitizing toolbar. Layerul curent nu este editabil. Apasati 'Permisiune de Editare' in bara de unelte pentru vectorizare. Provider does not support deletion Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. Data provider does not support deleting features Furnizorul de date corespunzator acestui layer nu suporta stergerea de obiecte. The current layer is not editable. Choose 'Allow editing' in the legend item right click menu Layerul curent nu este editabil. Apasati 'Editare' in bara de unelte pentru vectorizare. Start editing failed Nu se poate incepe editarea Provider cannot be opened for editing Furnizorul de date nu poate fi accesat pentru editare. Stop editing Încetaţi editarea Do you want to save the changes? Sunteţi sigur că doriţi să salvati? &Yes &Da &No &Nu Error Eroare Could not commit changes Nu se pot salva modificarile efectuate. Problems during roll back Probleme la aducerea in starea anterioara (roll back) Could not commit the added features. Obiectele adaugate nu pot fi salvate (nu se poate face commit). No other types of changes will be committed at this time. Nici o alta modificare nu va fi salvata pentru moment. Could not commit the changed attributes. Atributele modificate nu pot fi salvate. However, the added features were committed OK. Totusi, Obiectele adaugate au putut fi salvate. Could not commit the changed geometries. Geometriile obiectellor modificate nu au putut fi salvate. However, the changed attributes were committed OK. Totusi, Atributele modificate au putut fi salvate. Could not commit the deleted features. Obiectele marcate pentru a fi sterse nu pot fi sterse definitiv. However, the changed geometries were committed OK. Totusi, geometriile modificate au putut fi salvate. Cannot retrieve features Nu se pot accesa obiectele. The provider for the current layer cannot retrieve geometry for the selected features. This version of the provider does not have this capability. Furnizorul de date corespunzator stratului curent nu poate accesa geometria obiectelor selectate. Vesriunea actuala a furnizorului de date nu poseda aceasta capacitate. The current layer is not editable. Choose 'Allow editing' in the legend item right click menu. Layerul curent nu este editabil. Apasati 'Editare' in bara de unelte pentru vectorizare, sau mai puteti activa editarea facand click dreapta pe stratul corespunzator din legenda. ERROR: no provider ERROR: layer not editable SUCCESS: attribute %1 was added. ERROR: attribute %1 not added No renderer object Classification field not found SUCCESS: %n attribute(s) deleted. deleted attributes count ERROR: %n attribute(s) not deleted. not deleted attributes count SUCCESS: %n attribute(s) added. added attributes count ERROR: %n new attribute(s) not added not added attributes count SUCCESS: %n attribute value(s) changed. changed attribute values count ERROR: %n attribute value change(s) not applied. not changed attribute values count SUCCESS: %n feature(s) added. added features count ERROR: %n feature(s) not added. not added features count SUCCESS: %n geometries were changed. changed geometries count ERROR: %n geometries not changed. not changed geometries count SUCCESS: %n feature(s) deleted. deleted features count ERROR: %n feature(s) not deleted. not deleted features count Unknown renderer QgsVectorLayerProperties Transparency: Transparenta: Single Symbol Simbol Unic Graduated Symbol Simbol Gradual Continuous Color simbol continuu Unique Value Valoare unică This button opens the PostgreSQL query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer Acest buton deschide fereastra pentru construirea interogarilor PostgreSQL si permite selectia unui subset de obiecte ce vor fi afisate pe harta mai degraba decat afisarea completa a tuturor obiectelor existente in acest strat The query used to limit the features in the layer is shown here. This is currently only supported for PostgreSQL layers. To enter or modify the query, click on the Query Builder button Interogarea utilizata pentru limitarea obiectelor afisate este aratata aici. Pentru modificare apasati butonul Constructie Interogare. functioneaza doar pentru un layer PostgeSQL. Spatial Index Index Spatial Creation of spatial index successfull Crearea indexului spatial a fost incununata de succes. Creation of spatial index failed Crearea indexului spatial a esuat. General: General: Storage type of this layer : Tipul de stocare al acestui strat este: Source for this layer : Sursa acestui strat este: Geometry type of the features in this layer : Tipul geometriei: The number of features in this layer : Numarul obiectelor din acest strat: Editing capabilities of this layer : Capacitatile de editare ale acestui layer: Extents: Dimensiuni: In layer spatial reference system units : Unitati de refererinta intra-layer: xMin,yMin xMin,yMin : xMax,yMax : xMax,yMax In project spatial reference system units : Unitati de refererinta intra-proiect: Layer Spatial Reference System: Sistemul de referinta spatial al acestui layer: Project (Output) Spatial Reference System: Sistemul de referinta spatial al proiectului: Attribute field info: Informatii despre atribute: Field Atribut Type Tip Length Lungime Precision Precizie Comment Default Style QGIS Layer Style File (*.qml) QGIS id name type length precision comment edit widget values line edit unique values unique values (editable) value map classification range (editable) range (slider) file name Name conflict The attribute could not be inserted. The name already exists in the table. Creation of spatial index successful Saved Style Transparency: %1% Layer comment: %1 Storage type of this layer: %1 Source for this layer: %1 Geometry type of the features in this layer: %1 The number of features in this layer: %1 Editing capabilities of this layer: %1 xMin,yMin %1,%2 : xMax,yMax %3,%4 (Invalid transformation of layer extents) Load layer properties from style file (.qml) Unknown style format: %1 Save layer properties as style file (.qml) QgsVectorLayerPropertiesBase Layer Properties Caracteristici Strat Apply Aplica OK Ok Cancel Renuţare Help Ajutor Symbology Simbolizare Legend type: Tip Legendă: Transparency: Transparenta: General General Display name Afisare nume Display field for the Identify Results dialog box Camp de afisare pentru casuta de Identificare rezultate This sets the display field for the Identify Results dialog box Acesta seteaza campul de afisare pentru casuta de Identificare rezultate Display field Camp de afisare Use this control to set which field is placed at the top level of the Identify Results dialog box. A se utiliza pentru setarea atributului care va fi plasat in partea de sus a casutei de identificare rezultate. Use scale dependent rendering Utilizeaza rasdare in functie de scara Maximum 1: Maximum 1: Minimum 1: Minimum 1: Minimum scale at which this layer will be displayed. Scara minima la care acest strat va fi afisat. Maximum scale at which this layer will be displayed. Scara maxima la care acest strat va fi afisat. Spatial Index Index Spatial Create Spatial Index Creare index spatial Create Creaza Spatial Reference System Sistem de referinta spatial Change Schimba Subset Subset Query Builder Creator de Interogari Metadata Metadate Labels Etichete Display labels Afişează etichetele Actions Acţiuni Restore Default Style Save As Default Load Style ... Save Style ... Legend type Transparency Options Opţiuni Maximum Minimum Change CRS Attributes Atribute New column Coloană nouă Ctrl+N Delete column Ştergeţi coloana Ctrl+X Ctrl+X Toggle editing mode Click to toggle table editing QgsVectorSymbologyWidgetBase Form2 Form2 Label Etichetă (Denumire) Min Min Max Max Symbol Classes: Clase Simboluri Count: Nr: Mode: Mod: Field: Atribut QgsWFSData Loading WFS data Abort Renunta QgsWFSPlugin &Add WFS layer &Adăugare layer WFS QgsWFSProvider unknown received %1 bytes from %2 QgsWFSSourceSelect Are you sure you want to remove the Sunteţi sigur că doriţi să ştergeţi connection and all associated settings? conexiunea si toate setarile asociate? Confirm Delete Confirma stergerea Yes Da No Nu Are you sure you want to remove the %1 connection and all associated settings? QgsWFSSourceSelectBase Note: this plugin not considered stable yet. Use it on your own risk Notă: A se folosi pe propria raspundere. Title Titlu Name Nume Abstract Rezumat Coordinate Reference System Sistem de referinta spatial Change ... Schimba ... Help Ajutor F1 F1 &Add &Adauga Alt+A Alt+A C&lose &Închidere Alt+L Alt+L Server Connections Conexiuni Server &New &Nou Delete Ştergere Edit Editare C&onnect Conectare Add WFS Layer from a Server QgsWKNDiagramFactoryWidgetBase Form Attributes: Atribute 1 1 Remove attribute Add attribute QgsWmsProvider Tried URL: HTTP Exception WMS Service Exception This is probably due to an incorrect WMS Server URL. Could not get WMS Service Exception at %1: %2 at line %3 column %4 Request contains a Format not offered by the server. Request contains a CRS not offered by the server for one or more of the Layers in the request. Request contains a SRS not offered by the server for one or more of the Layers in the request. GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map. Request is for a Layer in a Style not offered by the server. GetFeatureInfo request is applied to a Layer which is not declared queryable. GetFeatureInfo request contains invalid X or Y value. Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number. Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number. Request does not include a sample dimension value, and the server did not declare a default value for that dimension. Request contains an invalid sample dimension value. Request is for an optional operation that is not supported by the server. The WMS vendor also reported: Server Properties: Property Caracteristică Value Valoare WMS Version Title Titlu Abstract Rezumat Keywords Online Resource Contact Person Fees Access Constraints Image Formats Identify Formats Layer Count Selected Yes Da No Nu Visibility Visible Hidden n/a nedisponibil Can Identify Can be Transparent Can Zoom In Cascade Count Fixed Width Fixed Height WGS 84 Bounding Box Available in style Name Nume Layer cannot be queried. Dom Exception Tried URL: %1 Could not get WMS capabilities: %1 at line %2 column %3 Could not get WMS capabilities in the expected format (DTD): no %1 or %2 found (No error code was reported) (Unknown error code) GetFeatureInfoUrl Layer Properties: QuickPrint Replace this with a short description of the what the plugin does A se înlocui cu o scurtă descriere a functionalitatii acestui plugin QuickPrintGui Portable Document Format (*.pdf) quickprint Unknown format: %1 QuickPrintGuiBase QGIS Plugin Template Matriţă pentru QGIS Plugin Plugin Template Matriţă Plugin QGIS Quick Print Plugin Quick Print Map Title e.g. ACME inc. Map Name e.g. Water Features Copyright Output Rezultat Use last filename but incremented. last used filename but incremented will be shown here Prompt for file name Note: If you want more control over the map layout please use the map composer function in QGIS. Page Size QuickPrintPlugin Quick Print Replace this with a short description of the what the plugin does A se înlocui cu o scurtă descriere a functionalitatii acestui plugin &Quick Print Provides a way to quickly produce a map with minimal user input. RepositoryDetailsDialog Name: Nume: SelectGeoRasterBase Select Oracle Spatial GeoRaster Server Connections Conexiuni Server C&onnect Conectare Edit Editare Delete Ştergere &New &Nou Selection Update Ready Gata &Select Alt+A Alt+A Subdatasets Help Ajutor F1 F1 C&lose &Închidere Alt+L Alt+L SimplifyLineDialog Simplify line tolerance Set tolerance OK [pluginname]Gui QGIS Plugin Template Matriţă pentru QGIS Plugin Plugin Template Matriţă Plugin [pluginname]GuiBase QGIS Plugin Template Matriţă pentru QGIS Plugin &OK &OK Alt+O Alt+O &Cancel &Renunţă Alt+C Alt+C Plugin Template Matriţă Plugin <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Welcome to your automatically generated plugin!This is just a starting point. You now need to modify the code to make it do something useful....read on for a more information to get yourself started.Documentation:You really need to read the QGIS API Documentation now at:http://svn.qgis.org/api_doc/html/In particular look at the following classes:QGisInterface : http://svn.qgis.org/api_doc/html/classQgisInterface.htmlQGisIface : http://svn.qgis.org/api_doc/html/classQgisIface.htmlQgsMapTool : http://svn.qgis.org/api_doc/html/classQgsMapTool.htmlQgsPlugin : http://svn.qgis.org/api_doc/html/classQgisPlugin.htmlQGisIface is an abstract base class (ABC) that specifies what publicly available features of QGIS are exposed to third party code and plugins. QgisInterface is an concrete implementation of this ABC. The preferred way to carry out operations on QGIS is via the QGisInterface. An instance of the QgisInterface is passed to the plugin when it loads. Please consult the QGIS development team if there is functionality required in the QGisInterface that is not available.QgsPlugin is an ABC that defines required behaviour your plugin must provide. See below for more details.What are all the files in my generated plugin directory for?Makefile.am This is the generated Makefile specification for your plugin. You will see that specifies c++ include paths (-I) and library linkages -l) to Qt4, GDAL, GEOS, QGIS Core, QGIS Ui, QGIS Gui and QGis Raster. You should add you application specific dependencies and source files to this Makefile.[pluginlcasename].h[pluginlcasename].cpp This is the class that provides the 'glue' between your custom application logic and the QGIS application. You will see that a number of methods are already implemented for you - including some examples of how to add a raster or vector layer to the main application map canvas. This class is a concrete instance of the QgisPlugin interface which defines required behaviour for a plugin. In particular, a plugin has a number of static methods and members so that the QgsPluginManager and plugin loader logic can identify each plugin, create an appropriate menu entry for it etc. Note there is nothing stopping you creating multiple toolbar icons and menu entries for a single plugin. By default though a single menu entry and toolbar button is created and its pre-configured to call the run() method in this class when selected. This default implementation provided for you by the plugin builder is well documented, so please refer to the code for further advice.[pluginlcasename]guibase.ui [pluginlcasename]guibase.ui.h This is an Abstract Base Class implemented in Qt4 fashion as a Qt designer 'ui' file. It defines the look of the default plugin dialog without implementing any application logic. You can modify this form to suite your needs or completely remove it if your plugin does not need to display a user form (e.g. for custom MapTools).[pluginlcasename]gui.cpp [pluginlcasename]gui.h This is the concrete class where application logic for the above mentioned dialog should go. The world is your oyster here really....[pluginlcasename].qrc This is the Qt4 resources file for your plugin. The Makefile generated for your plugin is all set up to compile the resource file so all you need to do is add your additional icons etc using the simple xml file format. Note the namespace used for all your resources e.g. (":/[pluginname]/"). It is important to use this prefix for all your resources. We suggest you include any other images and run time data in this resurce file too.[pluginlcasename].png This is the icon that will be used for your plugin menu entry and toolbar icon. Simply replace this icon with your own icon to make your plugin disctinctive from the rest.READMEThis file contains the documentation you are reading now!Getting developer help:For Questions and Comments regarding the plugin builder template and creating your features in QGIS using the plugin interface please contact us via: * the QGIS developers mailing list, or * IRC (#qgis on freenode.net)QGIS is distributed under the Gnu Public License. If you create a useful plugin please consider contributing it back to the community.Have fun and thank you for choosing QGIS.The QGIS Team2006</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:Sans Serif; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">Bine ati venit. Acesta este un plugin generat automat.This is just a starting point. You now need to modify the code to make it do something useful....read on for a more information to get yourself started.Documentation:You really need to read the QGIS API Documentation now at:http://svn.qgis.org/api_doc/html/In particular look at the following classes:QGisInterface : http://svn.qgis.org/api_doc/html/classQgisInterface.htmlQGisIface : http://svn.qgis.org/api_doc/html/classQgisIface.htmlQgsMapTool : http://svn.qgis.org/api_doc/html/classQgsMapTool.htmlQgsPlugin : http://svn.qgis.org/api_doc/html/classQgisPlugin.htmlQGisIface is an abstract base class (ABC) that specifies what publicly available features of QGIS are exposed to third party code and plugins. QgisInterface is an concrete implementation of this ABC. The preferred way to carry out operations on QGIS is via the QGisInterface. An instance of the QgisInterface is passed to the plugin when it loads. Please consult the QGIS development team if there is functionality required in the QGisInterface that is not available.QgsPlugin is an ABC that defines required behaviour your plugin must provide. See below for more details.What are all the files in my generated plugin directory for?Makefile.am This is the generated Makefile specification for your plugin. You will see that specifies c++ include paths (-I) and library linkages -l) to Qt4, GDAL, GEOS, QGIS Core, QGIS Ui, QGIS Gui and QGis Raster. You should add you application specific dependencies and source files to this Makefile.[pluginlcasename].h[pluginlcasename].cpp This is the class that provides the 'glue' between your custom application logic and the QGIS application. You will see that a number of methods are already implemented for you - including some examples of how to add a raster or vector layer to the main application map canvas. This class is a concrete instance of the QgisPlugin interface which defines required behaviour for a plugin. In particular, a plugin has a number of static methods and members so that the QgsPluginManager and plugin loader logic can identify each plugin, create an appropriate menu entry for it etc. Note there is nothing stopping you creating multiple toolbar icons and menu entries for a single plugin. By default though a single menu entry and toolbar button is created and its pre-configured to call the run() method in this class when selected. This default implementation provided for you by the plugin builder is well documented, so please refer to the code for further advice.[pluginlcasename]guibase.ui [pluginlcasename]guibase.ui.h This is an Abstract Base Class implemented in Qt4 fashion as a Qt designer 'ui' file. It defines the look of the default plugin dialog without implementing any application logic. You can modify this form to suite your needs or completely remove it if your plugin does not need to display a user form (e.g. for custom MapTools).[pluginlcasename]gui.cpp [pluginlcasename]gui.h This is the concrete class where application logic for the above mentioned dialog should go. The world is your oyster here really....[pluginlcasename].qrc This is the Qt4 resources file for your plugin. The Makefile generated for your plugin is all set up to compile the resource file so all you need to do is add your additional icons etc using the simple xml file format. Note the namespace used for all your resources e.g. (":/[pluginname]/"). It is important to use this prefix for all your resources. We suggest you include any other images and run time data in this resurce file too.[pluginlcasename].png This is the icon that will be used for your plugin menu entry and toolbar icon. Simply replace this icon with your own icon to make your plugin disctinctive from the rest.READMEThis file contains the documentation you are reading now!Getting developer help:For Questions and Comments regarding the plugin builder template and creating your features in QGIS using the plugin interface please contact us via: * the QGIS developers mailing list, or * IRC (#qgis on freenode.net)QGIS is distributed under the Gnu Public License. If you create a useful plugin please consider contributing it back to the community.Have fun and thank you for choosing QGIS.The QGIS Team2006</body></html> dxf2shpConverter Converts DXF files in Shapefile format &Dxf2Shp dxf2shpConverterGui QGIS Plugin Template Matriţă pentru QGIS Plugin Polygon Poligon Point Punct Browse Selectaţi Dxf Importer Input Dxf file ... ... <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;"> Output file</body></html> Output file type Polyline Export text labels Fields description: * Input DXF file: path to the DXF file to be converted * Output Shp file: desired name of the shape file to be created * Shp output file type: specifies the type of the output shape file * Export text labels checkbox: if checked, an additional shp points layer will be created, and the associated dbf table will contain informations about the "TEXT" fields found in the dxf file, and the text strings themselves --- Developed by Paolo L. Scala, Barbara Rita Barricelli, Marco Padula CNR, Milan Unit (Information Technology), Construction Technologies Institute. For support send a mail to scala@itc.cnr.it Choose a DXF file to open Choose a file name to save to eVisDatabaseConnectionGuiBase Username Nume Utilizator (Login) Connect Conectare Password Parola Port Port eVisGenericEventBrowserGui Field Atribut Value Valoare Warning Atenţie Error Eroare eVisGenericEventBrowserGuiBase Display Afisare 1 1 Options Opţiuni gpsPage No Nu pluginname Replace this with a short description of the what the plugin does A se înlocui cu o scurtă descriere a functionalitatii acestui plugin [menuitemname] &[menuname] Replace this with a short description of what the plugin does