/************************************************************************ * This file has been generated automatically from * * * * src/core/geometry/qgsgeometry.h * * * * Do not edit manually ! Edit header and run scripts/sipify.pl again * ************************************************************************/ typedef QVector QgsPolylineXY; typedef QVector QgsPolyline; typedef QVector> QgsPolygonXY; typedef QVector QgsMultiPointXY; typedef QVector> QgsMultiPolylineXY; typedef QVector>> QgsMultiPolygonXY; class QgsGeometry { %Docstring A geometry is the spatial representation of a feature. Since QGIS 2.10, QgsGeometry acts as a generic container for geometry objects. QgsGeometry is implicitly shared, so making copies of geometries is inexpensive. The geometry container class can also be stored inside a QVariant object. The actual geometry representation is stored as a QgsAbstractGeometry within the container, and can be accessed via the geometry() method or set using the setGeometry() method. %End %TypeHeaderCode #include "qgsgeometry.h" %End public: static const QMetaObject staticMetaObject; public: enum OperationResult { Success, NothingHappened, InvalidBaseGeometry, InvalidInputGeometryType, SelectionIsEmpty, SelectionIsGreaterThanOne, GeometryEngineError, LayerNotEditable, AddPartSelectedGeometryNotFound, AddPartNotMultiGeometry, AddRingNotClosed, AddRingNotValid, AddRingCrossesExistingRings, AddRingNotInExistingFeature, SplitCannotSplitPoint, }; QgsGeometry(); %Docstring Constructor %End QgsGeometry( const QgsGeometry & ); %Docstring Copy constructor will prompt a deep copy of the object %End explicit QgsGeometry( QgsAbstractGeometry *geom /Transfer/ ); %Docstring Creates a geometry from an abstract geometry object. Ownership of geom is transferred. .. versionadded:: 2.10 %End ~QgsGeometry(); const QgsAbstractGeometry *constGet() const; %Docstring Returns a non-modifiable (const) reference to the underlying abstract geometry primitive. This is much faster then calling the non-const get() method. .. note:: In QGIS 2.x this method was named geometry(). .. seealso:: :py:func:`set` .. seealso:: :py:func:`get` .. versionadded:: 3.0 %End QgsAbstractGeometry *get(); %Docstring Returns a modifiable (non-const) reference to the underlying abstract geometry primitive. This method can be slow to call, as it may trigger a detachment of the geometry and a deep copy. Where possible, use constGet() instead. .. note:: In QGIS 2.x this method was named geometry(). .. seealso:: :py:func:`constGet` .. seealso:: :py:func:`set` .. versionadded:: 3.0 %End void set( QgsAbstractGeometry *geometry /Transfer/ ); %Docstring Sets the underlying geometry store. Ownership of geometry is transferred. .. note:: In QGIS 2.x this method was named setGeometry(). .. seealso:: :py:func:`get` .. seealso:: :py:func:`constGet` .. versionadded:: 3.0 %End bool isNull() const; %Docstring Returns true if the geometry is null (ie, contains no underlying geometry accessible via geometry() ). .. seealso:: :py:func:`get` .. seealso:: :py:func:`isEmpty` .. versionadded:: 2.10 %End static QgsGeometry fromWkt( const QString &wkt ); %Docstring Creates a new geometry from a WKT string %End static QgsGeometry fromPointXY( const QgsPointXY &point ); %Docstring Creates a new geometry from a QgsPointXY object %End static QgsGeometry fromMultiPointXY( const QgsMultiPointXY &multipoint ); %Docstring Creates a new geometry from a QgsMultiPointXY object %End static QgsGeometry fromPolylineXY( const QgsPolylineXY &polyline ); %Docstring Creates a new LineString geometry from a list of QgsPointXY points. Using fromPolyline() is preferred, as fromPolyline() is more efficient and will respect any Z or M dimensions present in the input points. .. note:: In QGIS 2.x this method was available as fromPolyline(). .. seealso:: :py:func:`fromPolyline` .. versionadded:: 3.0 %End static QgsGeometry fromPolyline( const QgsPolyline &polyline ); %Docstring Creates a new LineString geometry from a list of QgsPoint points. This method will respect any Z or M dimensions present in the input points. E.g. if input points are PointZ type, the resultant linestring will be a LineStringZ type. .. versionadded:: 3.0 %End static QgsGeometry fromMultiPolylineXY( const QgsMultiPolylineXY &multiline ); %Docstring Creates a new geometry from a QgsMultiPolylineXY object %End static QgsGeometry fromPolygonXY( const QgsPolygonXY &polygon ); %Docstring Creates a new geometry from a :py:class:`QgsPolygon` %End static QgsGeometry fromMultiPolygonXY( const QgsMultiPolygonXY &multipoly ); %Docstring Creates a new geometry from a :py:class:`QgsMultiPolygon` %End static QgsGeometry fromRect( const QgsRectangle &rect ); %Docstring Creates a new geometry from a :py:class:`QgsRectangle` %End static QgsGeometry collectGeometry( const QVector &geometries ); %Docstring Creates a new multipart geometry from a list of QgsGeometry objects %End static QgsGeometry createWedgeBuffer( const QgsPoint ¢er, double azimuth, double angularWidth, double outerRadius, double innerRadius = 0 ); %Docstring Creates a wedge shaped buffer from a ``center`` point. The ``azimuth`` gives the angle (in degrees) for the middle of the wedge to point. The buffer width (in degrees) is specified by the ``angularWidth`` parameter. Note that the wedge will extend to half of the ``angularWidth`` either side of the ``azimuth`` direction. The outer radius of the buffer is specified via ``outerRadius``, and optionally an ``innerRadius`` can also be specified. The returned geometry will be a CurvePolygon geometry containing circular strings. It may need to be segmentized to convert to a standard Polygon geometry. .. versionadded:: 3.2 %End void fromWkb( const QByteArray &wkb ); %Docstring Set the geometry, feeding in the buffer containing OGC Well-Known Binary .. versionadded:: 3.0 %End QgsWkbTypes::Type wkbType() const; %Docstring Returns type of the geometry as a WKB type (point / linestring / polygon etc.) .. seealso:: :py:func:`type` %End QgsWkbTypes::GeometryType type() const; %Docstring Returns type of the geometry as a QgsWkbTypes.GeometryType .. seealso:: :py:func:`wkbType` %End bool isEmpty() const; %Docstring Returns true if the geometry is empty (eg a linestring with no vertices, or a collection with no geometries). A null geometry will always return true for isEmpty(). .. seealso:: :py:func:`isNull` %End bool isMultipart() const; %Docstring Returns true if WKB of the geometry is of WKBMulti* type %End bool equals( const QgsGeometry &geometry ) const; %Docstring Test if this geometry is exactly equal to another ``geometry``. This is a strict equality check, where the underlying geometries must have exactly the same type, component vertices and vertex order. Calling this method is dramatically faster than the topological equality test performed by isGeosEqual(). .. note:: Comparing two null geometries will return false. .. seealso:: :py:func:`isGeosEqual` .. versionadded:: 1.5 %End bool isGeosEqual( const QgsGeometry & ) const; %Docstring Compares the geometry with another geometry using GEOS. This method performs a slow, topological check, where geometries are considered equal if all of the their component edges overlap. E.g. lines with the same vertex locations but opposite direction will be considered equal by this method. Consider using the much faster, stricter equality test performed by equals() instead. .. note:: Comparing two null geometries will return false. .. seealso:: :py:func:`equals` .. versionadded:: 1.5 %End bool isGeosValid() const; %Docstring Checks validity of the geometry using GEOS .. versionadded:: 1.5 %End bool isSimple() const; %Docstring Determines whether the geometry is simple (according to OGC definition), i.e. it has no anomalous geometric points, such as self-intersection or self-tangency. Uses GEOS library for the test. .. note:: This is useful mainly for linestrings and linear rings. Polygons are simple by definition, for checking anomalies in polygon geometries one can use isGeosValid(). .. versionadded:: 3.0 %End double area() const; %Docstring Returns the area of the geometry using GEOS .. versionadded:: 1.5 %End double length() const; %Docstring Returns the length of geometry using GEOS .. versionadded:: 1.5 %End double distance( const QgsGeometry &geom ) const; %Docstring Returns the minimum distance between this geometry and another geometry, using GEOS. Will return a negative value if a geometry is missing. :param geom: geometry to find minimum distance to %End QgsVertexIterator vertices() const; %Docstring Returns Java-style iterator for traversal of vertices of the geometry .. versionadded:: 3.0 %End double hausdorffDistance( const QgsGeometry &geom ) const; %Docstring Returns the Hausdorff distance between this geometry and ``geom``. This is basically a measure of how similar or dissimilar 2 geometries are. This algorithm is an approximation to the standard Hausdorff distance. This approximation is exact or close enough for a large subset of useful cases. Examples of these are: - computing distance between Linestrings that are roughly parallel to each other, and roughly equal in length. This occurs in matching linear networks. - Testing similarity of geometries. If the default approximate provided by this method is insufficient, use hausdorffDistanceDensify() instead. In case of error -1 will be returned. .. seealso:: :py:func:`hausdorffDistanceDensify` .. versionadded:: 3.0 %End double hausdorffDistanceDensify( const QgsGeometry &geom, double densifyFraction ) const; %Docstring Returns the Hausdorff distance between this geometry and ``geom``. This is basically a measure of how similar or dissimilar 2 geometries are. This function accepts a ``densifyFraction`` argument. The function performs a segment densification before computing the discrete Hausdorff distance. The ``densifyFraction`` parameter sets the fraction by which to densify each segment. Each segment will be split into a number of equal-length subsegments, whose fraction of the total length is closest to the given fraction. This method can be used when the default approximation provided by hausdorffDistance() is not sufficient. Decreasing the ``densifyFraction`` parameter will make the distance returned approach the true Hausdorff distance for the geometries. In case of error -1 will be returned. .. seealso:: :py:func:`hausdorffDistance` .. versionadded:: 3.0 %End QgsPointXY closestVertex( const QgsPointXY &point, int &atVertex /Out/, int &beforeVertex /Out/, int &afterVertex /Out/, double &sqrDist /Out/ ) const; double distanceToVertex( int vertex ) const; %Docstring Returns the distance along this geometry from its first vertex to the specified vertex. :param vertex: vertex index to calculate distance to :return: distance to vertex (following geometry), or -1 for invalid vertex numbers .. versionadded:: 2.16 %End double angleAtVertex( int vertex ) const; %Docstring Returns the bisector angle for this geometry at the specified vertex. :param vertex: vertex index to calculate bisector angle at :return: bisector angle, in radians clockwise from north .. seealso:: :py:func:`interpolateAngle` .. versionadded:: 3.0 %End void adjacentVertices( int atVertex, int &beforeVertex /Out/, int &afterVertex /Out/ ) const; %Docstring Returns the indexes of the vertices before and after the given vertex index. This function takes into account the following factors: 1. If the given vertex index is at the end of a linestring, the adjacent index will be -1 (for "no adjacent vertex") 2. If the given vertex index is at the end of a linear ring (such as in a polygon), the adjacent index will take into account the first vertex is equal to the last vertex (and will skip equal vertex positions). %End bool insertVertex( double x, double y, int beforeVertex ); %Docstring Insert a new vertex before the given vertex index, ring and item (first number is index 0) If the requested vertex number (beforeVertex.back()) is greater than the last actual vertex on the requested ring and item, it is assumed that the vertex is to be appended instead of inserted. Returns false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point). It is up to the caller to distinguish between these error conditions. (Or maybe we add another method to this object to help make the distinction?) %End bool insertVertex( const QgsPoint &point, int beforeVertex ); %Docstring Insert a new vertex before the given vertex index, ring and item (first number is index 0) If the requested vertex number (beforeVertex.back()) is greater than the last actual vertex on the requested ring and item, it is assumed that the vertex is to be appended instead of inserted. Returns false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point). It is up to the caller to distinguish between these error conditions. (Or maybe we add another method to this object to help make the distinction?) %End bool moveVertex( double x, double y, int atVertex ); %Docstring Moves the vertex at the given position number and item (first number is index 0) to the given coordinates. Returns false if atVertex does not correspond to a valid vertex on this geometry %End bool moveVertex( const QgsPoint &p, int atVertex ); %Docstring Moves the vertex at the given position number and item (first number is index 0) to the given coordinates. Returns false if atVertex does not correspond to a valid vertex on this geometry %End bool deleteVertex( int atVertex ); %Docstring Deletes the vertex at the given position number and item (first number is index 0) :return: false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point), or if the number of remaining vertices in the linestring would be less than two. It is up to the caller to distinguish between these error conditions. (Or maybe we add another method to this object to help make the distinction?) %End QgsPoint vertexAt( int atVertex ) const; %Docstring Returns coordinates of a vertex. :param atVertex: index of the vertex :return: Coordinates of the vertex or QgsPoint(0,0) on error %End double sqrDistToVertexAt( QgsPointXY &point /In/, int atVertex ) const; %Docstring Returns the squared Cartesian distance between the given point to the given vertex index (vertex at the given position number, ring and item (first number is index 0)) %End QgsGeometry nearestPoint( const QgsGeometry &other ) const; %Docstring Returns the nearest point on this geometry to another geometry. .. seealso:: :py:func:`shortestLine` .. versionadded:: 2.14 %End QgsGeometry shortestLine( const QgsGeometry &other ) const; %Docstring Returns the shortest line joining this geometry to another geometry. .. seealso:: :py:func:`nearestPoint` .. versionadded:: 2.14 %End double closestVertexWithContext( const QgsPointXY &point, int &atVertex /Out/ ) const; %Docstring Searches for the closest vertex in this geometry to the given point. :param point: Specifiest the point for search :param atVertex: Receives index of the closest vertex :return: The squared Cartesian distance is also returned in sqrDist, negative number on error %End double closestSegmentWithContext( const QgsPointXY &point, QgsPointXY &minDistPoint /Out/, int &afterVertex /Out/, int *leftOf /Out/ = 0, double epsilon = DEFAULT_SEGMENT_EPSILON ) const; %Docstring Searches for the closest segment of geometry to the given point :param point: Specifies the point for search :param minDistPoint: Receives the nearest point on the segment :param afterVertex: Receives index of the vertex after the closest segment. The vertex before the closest segment is always afterVertex - 1 :param leftOf: Out: Returns if the point lies on the left of left side of the geometry ( < 0 means left, > 0 means right, 0 indicates that the test was unsuccessful, e.g. for a point exactly on the line) :param epsilon: epsilon for segment snapping :return: The squared Cartesian distance is also returned in sqrDist, negative number on error %End OperationResult addRing( const QVector &ring ); %Docstring Adds a new ring to this geometry. This makes only sense for polygon and multipolygons. :param ring: The ring to be added :return: OperationResult a result code: success or reason of failure %End OperationResult addRing( QgsCurve *ring /Transfer/ ); %Docstring Adds a new ring to this geometry. This makes only sense for polygon and multipolygons. :param ring: The ring to be added :return: OperationResult a result code: success or reason of failure %End OperationResult addPart( const QVector &points, QgsWkbTypes::GeometryType geomType = QgsWkbTypes::UnknownGeometry ) /PyName=addPointsXY/; %Docstring Adds a new part to a the geometry. :param points: points describing part to add :param geomType: default geometry type to create if no existing geometry :return: OperationResult a result code: success or reason of failure %End OperationResult addPart( const QgsPointSequence &points, QgsWkbTypes::GeometryType geomType = QgsWkbTypes::UnknownGeometry ) /PyName=addPoints/; %Docstring Adds a new part to a the geometry. :param points: points describing part to add :param geomType: default geometry type to create if no existing geometry :return: OperationResult a result code: success or reason of failure %End OperationResult addPart( QgsAbstractGeometry *part /Transfer/, QgsWkbTypes::GeometryType geomType = QgsWkbTypes::UnknownGeometry ); %Docstring Adds a new part to this geometry. :param part: part to add (ownership is transferred) :param geomType: default geometry type to create if no existing geometry :return: OperationResult a result code: success or reason of failure %End OperationResult addPart( const QgsGeometry &newPart ) /PyName=addPartGeometry/; %Docstring Adds a new island polygon to a multipolygon feature :return: OperationResult a result code: success or reason of failure .. note:: available in python bindings as addPartGeometry %End QgsGeometry removeInteriorRings( double minimumAllowedArea = -1 ) const; %Docstring Removes the interior rings from a (multi)polygon geometry. If the minimumAllowedArea parameter is specified then only rings smaller than this minimum area will be removed. .. versionadded:: 3.0 %End OperationResult translate( double dx, double dy, double dz = 0.0, double dm = 0.0 ); %Docstring Translates this geometry by dx, dy, dz and dm. :return: OperationResult a result code: success or reason of failure %End OperationResult transform( const QgsCoordinateTransform &ct, QgsCoordinateTransform::TransformDirection direction = QgsCoordinateTransform::ForwardTransform, bool transformZ = false ) throw( QgsCsException ); %Docstring Transforms this geometry as described by the coordinate transform ``ct``. The transformation defaults to a forward transform, but the direction can be swapped by setting the ``direction`` argument. By default, z-coordinates are not transformed, even if the coordinate transform includes a vertical datum transformation. To transform z-coordinates, set ``transformZ`` to true. This requires that the z coordinates in the geometry represent height relative to the vertical datum of the source CRS (generally ellipsoidal heights) and are expressed in its vertical units (generally meters). :return: OperationResult a result code: success or reason of failure %End OperationResult transform( const QTransform &t, double zTranslate = 0.0, double zScale = 1.0, double mTranslate = 0.0, double mScale = 1.0 ); %Docstring Transforms the x and y components of the geometry using a QTransform object ``t``. Optionally, the geometry's z values can be scaled via ``zScale`` and translated via ``zTranslate``. Similarly, m-values can be scaled via ``mScale`` and translated via ``mTranslate``. :return: OperationResult a result code: success or reason of failure %End OperationResult rotate( double rotation, const QgsPointXY ¢er ); %Docstring Rotate this geometry around the Z axis :param rotation: clockwise rotation in degrees :param center: rotation center :return: OperationResult a result code: success or reason of failure %End OperationResult splitGeometry( const QVector &splitLine, QVector &newGeometries /Out/, bool topological, QVector &topologyTestPoints /Out/ ); %Docstring Splits this geometry according to a given line. :param splitLine: the line that splits the geometry \param[out] newGeometries list of new geometries that have been created with the split :param topological: true if topological editing is enabled \param[out] topologyTestPoints points that need to be tested for topological completeness in the dataset :return: OperationResult a result code: success or reason of failure %End OperationResult reshapeGeometry( const QgsLineString &reshapeLineString ); %Docstring Replaces a part of this geometry with another line :return: OperationResult a result code: success or reason of failure %End QgsGeometry makeDifference( const QgsGeometry &other ) const; %Docstring Returns the geometry formed by modifying this geometry such that it does not intersect the other geometry. :param other: geometry that should not be intersect :return: difference geometry, or empty geometry if difference could not be calculated .. versionadded:: 3.0 %End QgsRectangle boundingBox() const; %Docstring Returns the bounding box of the geometry. .. seealso:: :py:func:`orientedMinimumBoundingBox` %End QgsGeometry orientedMinimumBoundingBox( double &area /Out/, double &angle /Out/, double &width /Out/, double &height /Out/ ) const; %Docstring Returns the oriented minimum bounding box for the geometry, which is the smallest (by area) rotated rectangle which fully encompasses the geometry. The area, angle (clockwise in degrees from North), width and height of the rotated bounding box will also be returned. .. seealso:: :py:func:`boundingBox` .. versionadded:: 3.0 %End QgsGeometry minimalEnclosingCircle( QgsPointXY ¢er /Out/, double &radius /Out/, unsigned int segments = 36 ) const; %Docstring Returns the minimal enclosing circle for the geometry. :param center: Center of the minimal enclosing circle returneds :param radius: Radius of the minimal enclosing circle returned :param segments: Number of segments used to segment geometry. :py:func:`QgsEllipse.toPolygon` .. versionadded:: 3.0 %End QgsGeometry orthogonalize( double tolerance = 1.0E-8, int maxIterations = 1000, double angleThreshold = 15.0 ) const; %Docstring Attempts to orthogonalize a line or polygon geometry by shifting vertices to make the geometries angles either right angles or flat lines. This is an iterative algorithm which will loop until either the vertices are within a specified tolerance of right angles or a set number of maximum iterations is reached. The angle threshold parameter specifies how close to a right angle or straight line an angle must be before it is attempted to be straightened. .. versionadded:: 3.0 %End QgsGeometry snappedToGrid( double hSpacing, double vSpacing, double dSpacing = 0, double mSpacing = 0 ) const; %Docstring Returns a new geometry with all points or vertices snapped to the closest point of the grid. If the gridified geometry could not be calculated (or was totally collapsed) an empty geometry will be returned. Note that snapping to grid may generate an invalid geometry in some corner cases. It can also be thought as rounding the edges and it may be useful for removing errors. :param hSpacing: Horizontal spacing of the grid (x axis). 0 to disable. :param vSpacing: Vertical spacing of the grid (y axis). 0 to disable. :param dSpacing: Depth spacing of the grid (z axis). 0 (default) to disable. :param mSpacing: Custom dimension spacing of the grid (m axis). 0 (default) to disable. .. versionadded:: 3.0 %End bool removeDuplicateNodes( double epsilon = 4 * DBL_EPSILON, bool useZValues = false ); %Docstring Removes duplicate nodes from the geometry, wherever removing the nodes does not result in a degenerate geometry. The ``epsilon`` parameter specifies the tolerance for coordinates when determining that vertices are identical. By default, z values are not considered when detecting duplicate nodes. E.g. two nodes with the same x and y coordinate but different z values will still be considered duplicate and one will be removed. If ``useZValues`` is true, then the z values are also tested and nodes with the same x and y but different z will be maintained. Note that duplicate nodes are not tested between different parts of a multipart geometry. E.g. a multipoint geometry with overlapping points will not be changed by this method. The function will return true if nodes were removed, or false if no duplicate nodes were found. .. versionadded:: 3.0 %End bool intersects( const QgsRectangle &rectangle ) const; %Docstring Returns true if this geometry exactly intersects with a ``rectangle``. This test is exact and can be slow for complex geometries. The GEOS library is used to perform the intersection test. Geometries which are not valid may return incorrect results. .. seealso:: :py:func:`boundingBoxIntersects` %End bool intersects( const QgsGeometry &geometry ) const; %Docstring Returns true if this geometry exactly intersects with another ``geometry``. This test is exact and can be slow for complex geometries. The GEOS library is used to perform the intersection test. Geometries which are not valid may return incorrect results. .. seealso:: :py:func:`boundingBoxIntersects` %End bool boundingBoxIntersects( const QgsRectangle &rectangle ) const; %Docstring Returns true if the bounding box of this geometry intersects with a ``rectangle``. Since this test only considers the bounding box of the geometry, is is very fast to calculate and handles invalid geometries. .. seealso:: :py:func:`intersects` .. versionadded:: 3.0 %End bool boundingBoxIntersects( const QgsGeometry &geometry ) const; %Docstring Returns true if the bounding box of this geometry intersects with the bounding box of another ``geometry``. Since this test only considers the bounding box of the geometries, is is very fast to calculate and handles invalid geometries. .. seealso:: :py:func:`intersects` .. versionadded:: 3.0 %End bool contains( const QgsPointXY *p ) const; %Docstring Tests for containment of a point (uses GEOS) %End bool contains( const QgsGeometry &geometry ) const; %Docstring Tests for if geometry is contained in another (uses GEOS) .. versionadded:: 1.5 %End bool disjoint( const QgsGeometry &geometry ) const; %Docstring Tests for if geometry is disjoint of another (uses GEOS) .. versionadded:: 1.5 %End bool touches( const QgsGeometry &geometry ) const; %Docstring Test for if geometry touch another (uses GEOS) .. versionadded:: 1.5 %End bool overlaps( const QgsGeometry &geometry ) const; %Docstring Test for if geometry overlaps another (uses GEOS) .. versionadded:: 1.5 %End bool within( const QgsGeometry &geometry ) const; %Docstring Test for if geometry is within another (uses GEOS) .. versionadded:: 1.5 %End bool crosses( const QgsGeometry &geometry ) const; %Docstring Test for if geometry crosses another (uses GEOS) .. versionadded:: 1.5 %End enum BufferSide { SideLeft, SideRight, }; enum EndCapStyle { CapRound, CapFlat, CapSquare, }; enum JoinStyle { JoinStyleRound, JoinStyleMiter, JoinStyleBevel, }; QgsGeometry buffer( double distance, int segments ) const; %Docstring Returns a buffer region around this geometry having the given width and with a specified number of segments used to approximate curves .. seealso:: :py:func:`singleSidedBuffer` .. seealso:: :py:func:`taperedBuffer` %End QgsGeometry buffer( double distance, int segments, EndCapStyle endCapStyle, JoinStyle joinStyle, double miterLimit ) const; %Docstring Returns a buffer region around the geometry, with additional style options. :param distance: buffer distance :param segments: for round joins, number of segments to approximate quarter-circle :param endCapStyle: end cap style :param joinStyle: join style for corners in geometry :param miterLimit: limit on the miter ratio used for very sharp corners (JoinStyleMiter only) .. seealso:: :py:func:`singleSidedBuffer` .. seealso:: :py:func:`taperedBuffer` .. versionadded:: 2.4 %End QgsGeometry offsetCurve( double distance, int segments, JoinStyle joinStyle, double miterLimit ) const; %Docstring Returns an offset line at a given distance and side from an input line. :param distance: buffer distance :param segments: for round joins, number of segments to approximate quarter-circle :param joinStyle: join style for corners in geometry :param miterLimit: limit on the miter ratio used for very sharp corners (JoinStyleMiter only) .. versionadded:: 2.4 %End QgsGeometry singleSidedBuffer( double distance, int segments, BufferSide side, JoinStyle joinStyle = JoinStyleRound, double miterLimit = 2.0 ) const; %Docstring Returns a single sided buffer for a (multi)line geometry. The buffer is only applied to one side of the line. :param distance: buffer distance :param segments: for round joins, number of segments to approximate quarter-circle :param side: side of geometry to buffer :param joinStyle: join style for corners :param miterLimit: limit on the miter ratio used for very sharp corners :return: buffered geometry, or an empty geometry if buffer could not be calculated .. seealso:: :py:func:`buffer` .. seealso:: :py:func:`taperedBuffer` .. versionadded:: 3.0 %End QgsGeometry taperedBuffer( double startWidth, double endWidth, int segments ) const; %Docstring Calculates a variable width buffer ("tapered buffer") for a (multi)curve geometry. The buffer begins at a width of ``startWidth`` at the start of each curve, and ends at a width of ``endWidth``. Note that unlike buffer() methods, ``startWidth`` and ``endWidth`` are the diameter of the buffer at these points, not the radius. The ``segments`` argument specifies the number of segments to approximate quarter-circle curves in the buffer. Non (multi)curve input geometries will return a null output geometry. .. seealso:: :py:func:`buffer` .. seealso:: :py:func:`singleSidedBuffer` .. seealso:: :py:func:`variableWidthBufferByM` .. versionadded:: 3.2 %End QgsGeometry variableWidthBufferByM( int segments ) const; %Docstring Calculates a variable width buffer for a (multi)linestring geometry, where the width at each node is taken from the linestring m values. The ``segments`` argument specifies the number of segments to approximate quarter-circle curves in the buffer. Non (multi)linestring input geometries will return a null output geometry. .. seealso:: :py:func:`buffer` .. seealso:: :py:func:`singleSidedBuffer` .. seealso:: :py:func:`taperedBuffer` .. versionadded:: 3.2 %End QgsGeometry extendLine( double startDistance, double endDistance ) const; %Docstring Extends a (multi)line geometry by extrapolating out the start or end of the line by a specified distance. Lines are extended using the bearing of the first or last segment in the line. .. versionadded:: 3.0 %End QgsGeometry simplify( double tolerance ) const; %Docstring Returns a simplified version of this geometry using a specified tolerance value %End QgsGeometry densifyByCount( int extraNodesPerSegment ) const; %Docstring Returns a copy of the geometry which has been densified by adding the specified number of extra nodes within each segment of the geometry. If the geometry has z or m values present then these will be linearly interpolated at the added nodes. Curved geometry types are automatically segmentized by this routine. .. seealso:: :py:func:`densifyByDistance` .. versionadded:: 3.0 %End QgsGeometry densifyByDistance( double distance ) const; %Docstring Densifies the geometry by adding regularly placed extra nodes inside each segment so that the maximum distance between any two nodes does not exceed the specified ``distance``. E.g. specifying a distance 3 would cause the segment [0 0] -> [10 0] to be converted to [0 0] -> [2.5 0] -> [5 0] -> [7.5 0] -> [10 0], since 3 extra nodes are required on the segment and spacing these at 2.5 increments allows them to be evenly spaced over the segment. If the geometry has z or m values present then these will be linearly interpolated at the added nodes. Curved geometry types are automatically segmentized by this routine. .. seealso:: :py:func:`densifyByCount` .. versionadded:: 3.0 %End QgsGeometry centroid() const; %Docstring Returns the center of mass of a geometry. If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. .. note:: for line based geometries, the center point of the line is returned, and for point based geometries, the point itself is returned .. seealso:: :py:func:`pointOnSurface` .. seealso:: :py:func:`poleOfInaccessibility` %End QgsGeometry pointOnSurface() const; %Docstring Returns a point guaranteed to lie on the surface of a geometry. While the centroid() of a geometry may be located outside of the geometry itself (e.g., for concave shapes), the point on surface will always be inside the geometry. If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. .. seealso:: :py:func:`centroid` .. seealso:: :py:func:`poleOfInaccessibility` %End QgsGeometry poleOfInaccessibility( double precision, double *distanceToBoundary /Out/ = 0 ) const; %Docstring Calculates the approximate pole of inaccessibility for a surface, which is the most distant internal point from the boundary of the surface. This function uses the 'polylabel' algorithm (Vladimir Agafonkin, 2016), which is an iterative approach guaranteed to find the true pole of inaccessibility within a specified tolerance. More precise tolerances require more iterations and will take longer to calculate. Optionally, the distance to the polygon boundary from the pole can be stored. .. seealso:: :py:func:`centroid` .. seealso:: :py:func:`pointOnSurface` .. versionadded:: 3.0 %End QgsGeometry convexHull() const; %Docstring Returns the smallest convex polygon that contains all the points in the geometry. If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. %End QgsGeometry voronoiDiagram( const QgsGeometry &extent = QgsGeometry(), double tolerance = 0.0, bool edgesOnly = false ) const; %Docstring Creates a Voronoi diagram for the nodes contained within the geometry. Returns the Voronoi polygons for the nodes contained within the geometry. If ``extent`` is specified then it will be used as a clipping envelope for the diagram. If no extent is set then the clipping envelope will be automatically calculated. In either case the diagram will be clipped to the larger of the provided envelope OR the envelope surrounding all input nodes. The ``tolerance`` parameter specifies an optional snapping tolerance which can be used to improve the robustness of the diagram calculation. If ``edgesOnly`` is true than line string boundary geometries will be returned instead of polygons. An empty geometry will be returned if the diagram could not be calculated. .. versionadded:: 3.0 %End QgsGeometry delaunayTriangulation( double tolerance = 0.0, bool edgesOnly = false ) const; %Docstring Returns the Delaunay triangulation for the vertices of the geometry. The ``tolerance`` parameter specifies an optional snapping tolerance which can be used to improve the robustness of the triangulation. If ``edgesOnly`` is true than line string boundary geometries will be returned instead of polygons. An empty geometry will be returned if the diagram could not be calculated. .. versionadded:: 3.0 %End QgsGeometry subdivide( int maxNodes = 256 ) const; %Docstring Subdivides the geometry. The returned geometry will be a collection containing subdivided parts from the original geometry, where no part has more then the specified maximum number of nodes (``maxNodes``). This is useful for dividing a complex geometry into less complex parts, which are better able to be spatially indexed and faster to perform further operations such as intersects on. The returned geometry parts may not be valid and may contain self-intersections. The minimum allowed value for ``maxNodes`` is 8. Curved geometries will be segmentized before subdivision. If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. .. versionadded:: 3.0 %End QgsGeometry interpolate( double distance ) const; %Docstring Returns interpolated point on line at distance. If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. .. seealso:: :py:func:`lineLocatePoint` .. versionadded:: 2.0 %End double lineLocatePoint( const QgsGeometry &point ) const; %Docstring Returns a distance representing the location along this linestring of the closest point on this linestring geometry to the specified point. Ie, the returned value indicates how far along this linestring you need to traverse to get to the closest location where this linestring comes to the specified point. :param point: point to seek proximity to :return: distance along line, or -1 on error .. note:: only valid for linestring geometries .. seealso:: :py:func:`interpolate` .. versionadded:: 3.0 %End double interpolateAngle( double distance ) const; %Docstring Returns the angle parallel to the linestring or polygon boundary at the specified distance along the geometry. Angles are in radians, clockwise from north. If the distance coincides precisely at a node then the average angle from the segment either side of the node is returned. :param distance: distance along geometry .. seealso:: :py:func:`angleAtVertex` .. versionadded:: 3.0 %End QgsGeometry intersection( const QgsGeometry &geometry ) const; %Docstring Returns a geometry representing the points shared by this geometry and other. If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. %End QgsGeometry clipped( const QgsRectangle &rectangle ); %Docstring Clips the geometry using the specified ``rectangle``. Performs a fast, non-robust intersection between the geometry and a ``rectangle``. The returned geometry may be invalid. .. versionadded:: 3.0 %End QgsGeometry combine( const QgsGeometry &geometry ) const; %Docstring Returns a geometry representing all the points in this geometry and other (a union geometry operation). If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. .. note:: this operation is not called union since its a reserved word in C++. %End QgsGeometry mergeLines() const; %Docstring Merges any connected lines in a LineString/MultiLineString geometry and converts them to single line strings. :return: a LineString or MultiLineString geometry, with any connected lines joined. An empty geometry will be returned if the input geometry was not a MultiLineString geometry. .. versionadded:: 3.0 %End QgsGeometry difference( const QgsGeometry &geometry ) const; %Docstring Returns a geometry representing the points making up this geometry that do not make up other. If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. %End QgsGeometry symDifference( const QgsGeometry &geometry ) const; %Docstring Returns a geometry representing the points making up this geometry that do not make up other. If the input is a NULL geometry, the output will also be a NULL geometry. If an error was encountered while creating the result, more information can be retrieved by calling `error()` on the returned geometry. %End QgsGeometry extrude( double x, double y ); %Docstring Returns an extruded version of this geometry. %End QByteArray asWkb() const; %Docstring Export the geometry to WKB .. versionadded:: 3.0 %End QString asWkt( int precision = 17 ) const; %Docstring Exports the geometry to WKT :return: true in case of success and false else .. note:: precision parameter added in QGIS 2.4 %End QString asJson( int precision = 17 ) const; %Docstring Exports the geometry to a GeoJSON string. %End QgsGeometry convertToType( QgsWkbTypes::GeometryType destType, bool destMultipart = false ) const /Factory/; %Docstring Try to convert the geometry to the requested type :param destType: the geometry type to be converted to :param destMultipart: determines if the output geometry will be multipart or not :return: the converted geometry or None if the conversion fails. .. versionadded:: 2.2 %End QgsPointXY asPoint() const; %Docstring Returns contents of the geometry as a point if wkbType is WKBPoint, otherwise returns [0,0] %End QgsPolylineXY asPolyline() const; %Docstring Returns contents of the geometry as a polyline if wkbType is WKBLineString, otherwise an empty list %End QgsPolygonXY asPolygon() const; %Docstring Returns contents of the geometry as a polygon if wkbType is WKBPolygon, otherwise an empty list %End QgsMultiPointXY asMultiPoint() const; %Docstring Returns contents of the geometry as a multi point if wkbType is WKBMultiPoint, otherwise an empty list %End QgsMultiPolylineXY asMultiPolyline() const; %Docstring Returns contents of the geometry as a multi linestring if wkbType is WKBMultiLineString, otherwise an empty list %End QgsMultiPolygonXY asMultiPolygon() const; %Docstring Returns contents of the geometry as a multi polygon if wkbType is WKBMultiPolygon, otherwise an empty list %End QVector asGeometryCollection() const; %Docstring Returns contents of the geometry as a list of geometries .. versionadded:: 1.1 %End QPointF asQPointF() const; %Docstring Returns contents of the geometry as a QPointF if wkbType is WKBPoint, otherwise returns a null QPointF. .. versionadded:: 2.7 %End QPolygonF asQPolygonF() const; %Docstring Returns contents of the geometry as a QPolygonF. If geometry is a linestring, then the result will be an open QPolygonF. If the geometry is a polygon, then the result will be a closed QPolygonF of the geometry's exterior ring. .. versionadded:: 2.7 %End bool deleteRing( int ringNum, int partNum = 0 ); %Docstring Deletes a ring in polygon or multipolygon. Ring 0 is outer ring and can't be deleted. :return: true on success .. versionadded:: 1.2 %End bool deletePart( int partNum ); %Docstring Deletes part identified by the part number :return: true on success .. versionadded:: 1.2 %End bool convertToMultiType(); %Docstring Converts single type geometry into multitype geometry e.g. a polygon into a multipolygon geometry with one polygon If it is already a multipart geometry, it will return true and not change the geometry. :return: true in case of success and false else %End bool convertToSingleType(); %Docstring Converts multi type geometry into single type geometry e.g. a multipolygon into a polygon geometry. Only the first part of the multi geometry will be retained. If it is already a single part geometry, it will return true and not change the geometry. :return: true in case of success and false else %End bool convertGeometryCollectionToSubclass( QgsWkbTypes::GeometryType geomType ); %Docstring Converts geometry collection to a the desired geometry type subclass (multi-point, multi-linestring or multi-polygon). Child geometries of different type are filtered out. Does nothing the geometry is not a geometry collection. May leave the geometry empty if none of the child geometries match the desired type. :return: true in case of success and false else .. versionadded:: 3.2 %End int avoidIntersections( const QList &avoidIntersectionsLayers ); %Docstring Modifies geometry to avoid intersections with the layers specified in project properties :return: 0 in case of success, 1 if geometry is not of polygon type, 2 if avoid intersection would change the geometry type, 3 other error during intersection removal :param avoidIntersectionsLayers: list of layers to check for intersections :param ignoreFeatures: possibility to give a list of features where intersections should be ignored (not available in Python bindings) .. versionadded:: 1.5 %End QgsGeometry makeValid() const; %Docstring Attempts to make an invalid geometry valid without losing vertices. Already-valid geometries are returned without further intervention. In case of full or partial dimensional collapses, the output geometry may be a collection of lower-to-equal dimension geometries or a geometry of lower dimension. Single polygons may become multi-geometries in case of self-intersections. It preserves Z values, but M values will be dropped. If an error was encountered during the process, more information can be retrieved by calling `error()` on the returned geometry. :return: new valid QgsGeometry or null geometry on error .. note:: Ported from PostGIS ST_MakeValid() and it should return equivalent results. .. versionadded:: 3.0 %End class Error { %TypeHeaderCode #include "qgsgeometry.h" %End public: Error(); explicit Error( const QString &m ); Error( const QString &m, const QgsPointXY &p ); QString what(); QgsPointXY where(); bool hasWhere(); }; enum ValidationMethod { ValidatorQgisInternal, ValidatorGeos, }; void validateGeometry( QVector &errors /Out/, ValidationMethod method = ValidatorQgisInternal ) const; %Docstring Validates geometry and produces a list of geometry errors. The ``method`` argument dictates which validator to utilize. .. note:: Available in Python bindings since QGIS 1.6 .. versionadded:: 1.5 %End static QgsGeometry unaryUnion( const QVector &geometries ); %Docstring Compute the unary union on a list of ``geometries``. May be faster than an iterative union on a set of geometries. The returned geometry will be fully noded, i.e. a node will be created at every common intersection of the input geometries. An empty geometry will be returned in the case of errors. %End static QgsGeometry polygonize( const QVector &geometries ); %Docstring Creates a GeometryCollection geometry containing possible polygons formed from the constituent linework of a set of ``geometries``. The input geometries must be fully noded (i.e. nodes exist at every common intersection of the geometries). The easiest way to ensure this is to first call unaryUnion() on the set of input geometries and then pass the result to polygonize(). An empty geometry will be returned in the case of errors. .. versionadded:: 3.0 %End void convertToStraightSegment( double tolerance = M_PI / 180., QgsAbstractGeometry::SegmentationToleranceType toleranceType = QgsAbstractGeometry::MaximumAngle ); %Docstring Converts the geometry to straight line segments, if it is a curved geometry type. :param tolerance: segmentation tolerance :param toleranceType: maximum segmentation angle or maximum difference between approximation and curve .. seealso:: :py:func:`requiresConversionToStraightSegments` .. versionadded:: 2.10 %End bool requiresConversionToStraightSegments() const; %Docstring Returns true if the geometry is a curved geometry type which requires conversion to display as straight line segments. .. seealso:: :py:func:`convertToStraightSegment` .. versionadded:: 2.10 %End void mapToPixel( const QgsMapToPixel &mtp ); %Docstring Transforms the geometry from map units to pixels in place. :param mtp: map to pixel transform .. versionadded:: 2.10 %End void draw( QPainter &p ) const; %Docstring Draws the geometry onto a QPainter :param p: destination QPainter .. versionadded:: 2.10 %End bool vertexIdFromVertexNr( int number, QgsVertexId &id /Out/ ) const; %Docstring Calculates the vertex ID from a vertex ``number``. If a matching vertex was found, it will be stored in ``id``. Returns true if vertex was found. .. seealso:: :py:func:`vertexNrFromVertexId` .. versionadded:: 2.10 %End int vertexNrFromVertexId( QgsVertexId id ) const; %Docstring Returns the vertex number corresponding to a vertex ``id``. The vertex numbers start at 0, so a return value of 0 corresponds to the first vertex. Returns -1 if a corresponding vertex could not be found. .. seealso:: :py:func:`vertexIdFromVertexNr` .. versionadded:: 2.10 %End QString lastError() const; %Docstring Returns an error string referring to the last error encountered either when this geometry was created or when an operation was performed on the geometry. .. versionadded:: 3.0 %End static QgsGeometry fromQPointF( QPointF point ); %Docstring Construct geometry from a QPointF :param point: source QPointF .. versionadded:: 2.7 %End static QgsGeometry fromQPolygonF( const QPolygonF &polygon ); %Docstring Construct geometry from a QPolygonF. If the polygon is closed than the resultant geometry will be a polygon, if it is open than the geometry will be a polyline. :param polygon: source QPolygonF .. versionadded:: 2.7 %End static QgsPolylineXY createPolylineFromQPolygonF( const QPolygonF &polygon ) /Factory/; %Docstring Creates a QgsPolylineXY from a QPolygonF. :param polygon: source polygon :return: :py:class:`QgsPolylineXY` .. seealso:: :py:func:`createPolygonFromQPolygonF` %End static QgsPolygonXY createPolygonFromQPolygonF( const QPolygonF &polygon ) /Factory/; %Docstring Creates a QgsPolygonXYfrom a QPolygonF. :param polygon: source polygon :return: :py:class:`QgsPolygon` .. seealso:: :py:func:`createPolylineFromQPolygonF` %End static bool compare( PyObject *obj1, PyObject *obj2, double epsilon = 4 * DBL_EPSILON ); %Docstring Compares two geometry objects for equality within a specified tolerance. The objects can be of type :py:class:`QgsPolylineXY`, QgsPolygonXYor :py:class:`QgsMultiPolygon`. The 2 types should match. :param p1: first geometry object :param p2: second geometry object :param epsilon: maximum difference for coordinates between the objects :return: true if objects are - polylines and have the same number of points and all points are equal within the specified tolerance - polygons and have the same number of points and all points are equal within the specified tolerance - multipolygons and have the same number of polygons, the polygons have the same number of rings, and each ring has the same number of points and all points are equal within the specified tolerance .. versionadded:: 2.9 %End %MethodCode { sipRes = false; int state0; int state1; int sipIsErr = 0; if ( PyList_Check( a0 ) && PyList_Check( a1 ) && PyList_GET_SIZE( a0 ) && PyList_GET_SIZE( a1 ) ) { PyObject *o0 = PyList_GetItem( a0, 0 ); PyObject *o1 = PyList_GetItem( a1, 0 ); if ( o0 && o1 ) { // compare polyline - polyline if ( sipCanConvertToType( o0, sipType_QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( o1, sipType_QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( a0, sipType_QVector_0100QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( a1, sipType_QVector_0100QgsPointXY, SIP_NOT_NONE ) ) { QgsPolylineXY *p0; QgsPolylineXY *p1; p0 = reinterpret_cast( sipConvertToType( a0, sipType_QVector_0100QgsPointXY, 0, SIP_NOT_NONE, &state0, &sipIsErr ) ); p1 = reinterpret_cast( sipConvertToType( a1, sipType_QVector_0100QgsPointXY, 0, SIP_NOT_NONE, &state1, &sipIsErr ) ); if ( sipIsErr ) { sipReleaseType( p0, sipType_QVector_0100QgsPointXY, state0 ); sipReleaseType( p1, sipType_QVector_0100QgsPointXY, state1 ); } else { sipRes = QgsGeometry::compare( *p0, *p1, a2 ); } } else if ( PyList_Check( o0 ) && PyList_Check( o1 ) && PyList_GET_SIZE( o0 ) && PyList_GET_SIZE( o1 ) ) { PyObject *oo0 = PyList_GetItem( o0, 0 ); PyObject *oo1 = PyList_GetItem( o1, 0 ); if ( oo0 && oo1 ) { // compare polygon - polygon if ( sipCanConvertToType( oo0, sipType_QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( oo1, sipType_QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( a0, sipType_QVector_0600QVector_0100QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( a1, sipType_QVector_0600QVector_0100QgsPointXY, SIP_NOT_NONE ) ) { QgsPolygonXY *p0; QgsPolygonXY *p1; p0 = reinterpret_cast( sipConvertToType( a0, sipType_QVector_0600QVector_0100QgsPointXY, 0, SIP_NOT_NONE, &state0, &sipIsErr ) ); p1 = reinterpret_cast( sipConvertToType( a1, sipType_QVector_0600QVector_0100QgsPointXY, 0, SIP_NOT_NONE, &state1, &sipIsErr ) ); if ( sipIsErr ) { sipReleaseType( p0, sipType_QVector_0600QVector_0100QgsPointXY, state0 ); sipReleaseType( p1, sipType_QVector_0600QVector_0100QgsPointXY, state1 ); } else { sipRes = QgsGeometry::compare( *p0, *p1, a2 ); } } else if ( PyList_Check( oo0 ) && PyList_Check( oo1 ) && PyList_GET_SIZE( oo0 ) && PyList_GET_SIZE( oo1 ) ) { PyObject *ooo0 = PyList_GetItem( oo0, 0 ); PyObject *ooo1 = PyList_GetItem( oo1, 0 ); if ( ooo0 && ooo1 ) { // compare multipolygon - multipolygon if ( sipCanConvertToType( ooo0, sipType_QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( ooo1, sipType_QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( a0, sipType_QVector_0600QVector_0600QVector_0100QgsPointXY, SIP_NOT_NONE ) && sipCanConvertToType( a1, sipType_QVector_0600QVector_0600QVector_0100QgsPointXY, SIP_NOT_NONE ) ) { QgsMultiPolygonXY *p0; QgsMultiPolygonXY *p1; p0 = reinterpret_cast( sipConvertToType( a0, sipType_QVector_0600QVector_0600QVector_0100QgsPointXY, 0, SIP_NOT_NONE, &state0, &sipIsErr ) ); p1 = reinterpret_cast( sipConvertToType( a1, sipType_QVector_0600QVector_0600QVector_0100QgsPointXY, 0, SIP_NOT_NONE, &state1, &sipIsErr ) ); if ( sipIsErr ) { sipReleaseType( p0, sipType_QVector_0600QVector_0600QVector_0100QgsPointXY, state0 ); sipReleaseType( p1, sipType_QVector_0600QVector_0600QVector_0100QgsPointXY, state1 ); } else { sipRes = QgsGeometry::compare( *p0, *p1, a2 ); } } } } } } } } } %End QgsGeometry smooth( unsigned int iterations = 1, double offset = 0.25, double minimumDistance = -1.0, double maxAngle = 180.0 ) const; %Docstring Smooths a geometry by rounding off corners using the Chaikin algorithm. This operation roughly doubles the number of vertices in a geometry. If input geometries contain Z or M values, these will also be smoothed and the output geometry will retain the same dimensionality as the input geometry. :param iterations: number of smoothing iterations to run. More iterations results in a smoother geometry :param offset: fraction of line to create new vertices along, between 0 and 1.0, e.g., the default value of 0.25 will create new vertices 25% and 75% along each line segment of the geometry for each iteration. Smaller values result in "tighter" smoothing. :param minimumDistance: minimum segment length to apply smoothing to :param maxAngle: maximum angle at node (0-180) at which smoothing will be applied .. versionadded:: 2.9 %End static QgsGeometryEngine *createGeometryEngine( const QgsAbstractGeometry *geometry ) /Factory/; %Docstring Creates and returns a new geometry engine %End static void convertPointList( const QVector &input, QgsPointSequence &output ); %Docstring Upgrades a point list from QgsPointXY to :py:class:`QgsPoint` :param input: list of QgsPointXY objects to be upgraded :param output: destination for list of points converted to :py:class:`QgsPoint` %End static void convertPointList( const QgsPointSequence &input, QVector &output ); %Docstring Downgrades a point list from QgsPoint to :py:class:`QgsPointXY` :param input: list of QgsPoint objects to be downgraded :param output: destination for list of points converted to :py:class:`QgsPointXY` %End operator QVariant() const; operator bool() const; }; // class QgsGeometry /************************************************************************ * This file has been generated automatically from * * * * src/core/geometry/qgsgeometry.h * * * * Do not edit manually ! Edit header and run scripts/sipify.pl again * ************************************************************************/