[qgis] # If true, QGIS will automatically check for new versions on startup and notify users if a new version is available. # This setting controls the default value for that setting. Users may still manually enable or disable this check # through the QGIS settings dialog. checkVersion=true # If true, users may control whether the version check is enabled or disabled through the QGIS settings dialog. (The default # check behavior is determined by the 'checkVersion' setting). If false, no version checking will be performed and # users will NOT have an option to enable this check in the settings dialog. # This setting is intended for use in enterprise installs where QGIS version management is handled centrally. allowVersionCheck=true # If true, added layer names will be automatically capitalized and underscores replaced with spaces formatLayerName=false # If set to true then directories will be automatically monitored and refreshed when their contents change outside of QGIS. # This monitoring can be expensive, especially for remote or network drives, in which case setting this option to false # can result in a speedup of the QGIS interface. monitorDirectoriesInBrowser=true [digitizing] # Snapping enabled by default default-snap-enabled=false # Default snapping tolerance (distance) default-snapping-tolerance=12.0 # Default snap to type # Vertex, VertexAndSegment, Segment default-snap-type=Vertex # Default snapping unit # LayerUnits, Pixels, ProjectUnits default-snapping-tolerance-unit=Pixels # Snap on invisible feature snap-invisible-feature=false [connections] # Default XYZ tile servers to include xyz\items\OpenStreetMap\authcfg= xyz\items\OpenStreetMap\password= xyz\items\OpenStreetMap\referer= xyz\items\OpenStreetMap\url=https://tile.openstreetmap.org/{z}/{x}/{y}.png xyz\items\OpenStreetMap\username= xyz\items\OpenStreetMap\zmax=19 xyz\items\OpenStreetMap\zmin=0 xyz\items\OpenStreetMap\tile-pixel-ratio=1 xyz\items\Mapzen Global Terrain\authcfg= xyz\items\Mapzen Global Terrain\password= xyz\items\Mapzen Global Terrain\referer= xyz\items\Mapzen Global Terrain\url=https://s3.amazonaws.com/elevation-tiles-prod/terrarium/{z}/{x}/{y}.png xyz\items\Mapzen Global Terrain\username= xyz\items\Mapzen Global Terrain\zmax=15 xyz\items\Mapzen Global Terrain\zmin=0 xyz\items\Mapzen Global Terrain\interpretation=terrariumterrain [qgis] # The image format selected by default when adding a WMS, i.e. image/png. If empty, the first available format is used WMSDefaultFormat="" # application stylesheet # Padding (in pixels) to add to toolbar icons, if blank then default padding will be used stylesheet\toolbarSpacing= # If true, new projects are using relative paths. If false, new projects default to absolute paths. defaultProjectPathsRelative=true # Max image cache size in bytes. # The cache is used for caching symbology and layout images, # If high resolution images are used for printing layout, then this # value should be increased accordingly. # If 0, will use a default value calculated based on the system memory (which defaults to 100mb) maxImageCacheSize=0 [app] # Whether the user should be asked to save a layer in case of one or more MemoryLayers # when a project is closed. # Default to true, set to false to disable this dialog/question. askToSaveMemoryLayers=true # Maximum number of recent projects to show on the welcome page maxRecentProjects=20 # Minimum time (in seconds) for a background task to execute in order for a system # notification to be shown when the task completes. minTaskLengthForSystemNotification=5 # Whether to show the distance panned message in the status bar after a map pan operation # occurs. Set to false to disable the message. showPanDistanceInStatusBar=true # Whether to prompt users for a selection when multiple possible transformation paths exist # when transforming coordinates. If false, a reasonable choice will be estimated by default # without asking users. If true, users are always required to make this choice themselves. projections\promptWhenMultipleTransformsExist=true # Default CRS for newly created projects. Accepts "auth:code" style strings (e.g. EPSG:4326), # PROJ strings (must be prefixed with PROJ4:, e.g. "PROJ4:+proj ...."), or WKT strings (must # be prefixed with WKT:, e.g. "WKT:") # This is only used when projections\newProjectCrsBehavior is set to UsePresetCrs projections\defaultProjectCrs=EPSG:4326 # Specifies the method to set the CRS for a newly created project. Valid options are # "UseCrsOfFirstLayerAdded" - sets the project CRS to match the CRS of the first layer added to the project # "UsePresetCrs" - always use a preset CRS, see projections\defaultProjectCrs projections\newProjectCrsBehavior=UseCrsOfFirstLayerAdded # Specifies the behavior when adding a layer with unknown/invalid CRS to a project # "NoAction" - take no action and leave as unknown CRS # "PromptUserForCrs" - user is prompted for a CRS choice # "UseProjectCrs" - copy the current project's CRS # "UseDefaultCrs" - use the default layer CRS set via QGIS options projections\unknownCrsBehavior=NoAction # If the inherent inaccuracy in a selected CRS exceeds this threshold value (in meters), # a warning message will be shown to the user advising them to select an alternative # CRS if higher positional accuracy is required projections\crsAccuracyWarningThreshold=0.0 # If set to true, a warning icon will be shown next to any layer where the layer's CRS exceeds # the accuracy warning threshold value (see crsAccuracyWarningThreshold) projections\crsAccuracyIndicator=false [app] # Specifies a manual bearing correction to apply to bearings reported by a GPS # device, for use when a map canvas is set to match rotation to the GPS bearing # or when showing the GPS bearing line gps\bearingAdjustment=0 # Set to "true" to automatically correct GPS reported bearings for true north # when a map canvas is set to match rotation to the GPS bearing # or when showing the GPS bearing line gps\correctForTrueNorth=false [gps] # Desired flow control mode for serial port GPS connections # "NoFlowControl" - no flow control # "HardwareControl" - hardware flow control (RTS/CTS) # "SoftwareControl" - software flow control (XON/XOFF) flow-control=NoFlowControl # Desired parity checking mode for serial port GPS connections # "NoParity" - No parity bit it sent. This is the most common parity setting. Error detection is handled by the communication protocol. # "EvenParity" - The number of 1 bits in each character, including the parity bit, is always even. # "OddParity" - The number of 1 bits in each character, including the parity bit, is always odd. It ensures that at least one state transition occurs in each character. # "SpaceParity" - Space parity. The parity bit is sent in the space signal condition. It does not provide error detection information. # "MarkParity" - Mark parity. The parity bit is always set to the mark signal condition (logical 1). It does not provide error detection information. parity=NoParity # Desired data bits in a frame for serial port GPS connections # "Data5" - The number of data bits in each character is 5. It is used for Baudot code. It generally only makes sense with older equipment such as teleprinters. # "Data6" - The number of data bits in each character is 6. It is rarely used. # "Data7" - The number of data bits in each character is 7. It is used for true ASCII. It generally only makes sense with older equipment such as teleprinters. # "Data8" - The number of data bits in each character is 8. It is used for most kinds of data, as this size matches the size of a byte. It is almost universally used in newer applications. data-bits=Data8 # Desired number of stop bits in a frame for serial port GPS connections # "OneStop" - 1 stop bit. # "OneAndHalfStop" - 1.5 stop bits. This is only for the Windows platform. # "TwoStop" - 2 stop bits. stop-bits=OneStop # Default for GPS leap seconds correction as of 2019-06-19 leapSecondsCorrection=18 [core] # Whether or not to anonymize newly created projects # If set to true, then project metadata items like AUTHOR and CREATION DATE # will not be automatically populated when a new project is created. projects\anonymize_new_projects=false # Whether or not to anonymize projects when saving # If set to true, then username information will not be stored in saved projects projects\anonymize_saved_projects=false # News feed settings # Set to true to disable the QGIS news feed on the welcome page NewsFeed\http00008000\disabled=false # Optionally, set to an ISO-939-1 two letter language code to filter the QGIS news feed by language NewsFeed\http00008000\lang= # Optionally, set to a specific user latitude and longitude to filter the QGIS news feed to remove # local news outside of the users geographic area NewsFeed\http00008000\lat= NewsFeed\http00008000\long= # When new projects are created, default to planimetric measurement. measure\planimetric=false # When set to a non-zero value, places a global limit on the maximum number of label candidates which # are generated for point features. Setting this limit to a low (non-zero) value can improve map rendering # time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates # that no limit is present. rendering\label_candidates_limit_points=0 # When set to a non-zero value, places a global limit on the maximum number of label candidates which # are generated for line features. Setting this limit to a low (non-zero) value can improve map rendering # time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates # that no limit is present. rendering\label_candidates_limit_lines=0 # When set to a non-zero value, places a global limit on the maximum number of label candidates which # are generated for polygon features. Setting this limit to a low (non-zero) value can improve map rendering # time, at the expense of worse label placement or potentially missing map labels. A value of 0 indicates # that no limit is present. rendering\label_candidates_limit_polygons=0 [colors] # These colors are used in logs. default= info= success= warning=#dc7d00 critical=#c80000 [help] # Default help location to include # for now this is online version of the User Guide for latest (LTR) release helpSearchPath=https://docs.qgis.org/$qgis_short_version/$qgis_locale/docs/user_manual/ [providers] # Whether deprecated data providers should be shown in the QGIS UI (e.g. db2) # Warning: these providers are NOT supported and they will be dropped in a future QGIS # version. Commercial users requiring on these providers should contact the QGIS # project ASAP and arrange for ongoing funding of the provider to prevent their # removal and restore them to fully supported status. showDeprecated=false # Default timeout for PostgreSQL servers (seconds) PostgreSQL\default_timeout=30 [gui] # Maximum number of entries to show in Relation Reference widgets. Too large a number here can # cause performance issues, as the records must all be loaded from the related table on display. maxEntriesRelationWidget=100 # Path to default image to use for layout north arrows # Acceptable formats include local paths, http(s) urls, or even base64 encoded SVGs (prefixed with base64:....) LayoutDesigner\defaultNorthArrow=:/images/north_arrows/layout_default_north_arrow.svg # Default font to use in layout designer LayoutDesigner\defaultFont= [geometry_validation] # A comma separated list of geometry validations to enable by default for newly added layers # Available checks: QgsIsValidCheck,QgsGeometryGapCheck,QgsGeometryOverlapCheck,QgsGeometryMissingVertexCheck default_checks= # Enable problem resolution for geometry errors # This feature is experimental and has known issues. enable_problem_resolution=false # Path to (or command name for) the GPSBabel executable file gpsbabelPath=gpsbabel [proxy] # # URL list for which proxy configuration doesn't apply. In the case of these URLs, the default system proxy configuration # # is applied # proxyExcludedUrls=http://intranet,http://anotherproxy