From fa4d167fc56766c797bf24a56feb69ab23cfe767 Mon Sep 17 00:00:00 2001 From: William Kyngesburye Date: Sun, 29 May 2011 10:58:55 -0500 Subject: [PATCH] OS X install updates --- INSTALL | 359 +++++++++++++++------------------ doc/INSTALL.html | 513 +++++++++++++++++++---------------------------- doc/osx.t2t | 366 +++++++++++++-------------------- 3 files changed, 511 insertions(+), 727 deletions(-) diff --git a/INSTALL b/INSTALL index 79df75cf603..558a91ca444 100644 --- a/INSTALL +++ b/INSTALL @@ -1,10 +1,10 @@ Quantum GIS (QGIS) Building QGIS from source - step by step -Thursday May 26, 2011 +Sunday May 29, 2011 -Last Updated: Thursday May 26, 2011 -Last Change : Tuesday May 24, 2011 +Last Updated: Sunday May 29, 2011 +Last Change : Friday May 20, 2011 1. Introduction @@ -23,14 +23,13 @@ Last Change : Tuesday May 24, 2011 4.1. Building with Microsoft Visual Studio 4.2. Building using MinGW 4.3. Creation of MSYS environment for compilation of Quantum GIS - 5. MacOS X: building using frameworks and Cmake - 5.1. Install Qt4 from .dmg + 5. Building on MacOS X + 5.1. Install Qt4 from disk image 5.2. Install development frameworks for QGIS dependencies 5.3. Install CMake for OSX - 5.4. Install subversion for OSX - 5.5. Check out QGIS from SVN - 5.6. Configure the build - 5.7. Building + 5.4. Download QGIS source from github + 5.5. Configure the build + 5.6. Building 6. Authors and Acknowledgments @@ -1162,26 +1161,27 @@ We're done with preparation of MSYS environment. Now you can delete all stuff in of space and it's not necessary at all. - 5. MacOS X: building using frameworks and Cmake - =============================================== + 5. Building on MacOS X + ====================== In this approach I will try to avoid as much as possible building dependencies from source and rather use frameworks wherever possible. -The base system here is Mac OS X 10.4 (Tiger), with a single architecture build. -Included are a few notes for building on Mac OS X 10.5 (Leopard) and 10.6 (Snow Leopard). -Make sure to read each section completely before typing the first command you see. +The base system here is Mac OS X 10.4 (Tiger), with a single architecture +build. Included are notes for building on Mac OS X 10.5 (Leopard) and 10.6 +(Snow Leopard). Make sure to read each section completely before typing +the first command you see. General note on Terminal usage: When I say "cd" to a folder in a Terminal, it means type "cd " (without the quotes, make sure to type a space after) and -then type the path to said folder, then . A simple way to do this without having to know -and type the full path is, after type the "cd " part, drag the folder (use the icon -in its window title bar, or drag a folder from within a window) from the Desktop -to the Terminal, then tap . +then type the path to said folder, then . A simple way to do this +without having to know and type the full path is, after type the "cd " part, +drag the folder (use the icon in its window title bar, or drag a folder from +within a window) from the Desktop to the Terminal, then tap . -Parallel Compilation: On multiprocessor/multicore Macs, it's possible to speed -up compilation, but it's not automatic. Whenever you type "make" (but NOT "make install"), -instead type: +Parallel Compilation: On multiprocessor/multicore Macs, it's possible to +speed up compilation, but it's not automatic. Whenever you type "make" (but +NOT "make install"), instead type: make -j [n] @@ -1194,25 +1194,28 @@ ie: Mac Pro "8 Core" model (2 quad core processors) = 8 ie: Macbook Pro i5 (hyperthreading) = 2 cores X 2 = 4 - 5.1. Install Qt4 from .dmg - ========================== + 5.1. Install Qt4 from disk image + ================================ -You need a minimum of Qt-4.4.0. I suggest getting the latest. +You need a minimum of Qt-4.4.0. I suggest getting the latest. There is no need +for the full Qt SDK, so save yourself some download time and get the frameworks +only. Snow Leopard note: If you are building on Snow Leopard, you will need to decide between 32-bit support in the older, Qt Carbon branch, or 64-bit support in the Qt Cocoa branch. Appropriate installers are available for both as of Qt-4.5.2. Qt 4.6+ is recommended for Cocoa. -PPC note: There appear to be issues with Qt Cocoa on PPC Macs. QT Carbon -is recommended on PPC Macs. +PPC note: The readymade Qt Cocoa installers don't include PPC support, you'd +have to compile Qt yourself. But, there appear to be issues with Qt Cocoa on +PPC Macs anyways. Qt Carbon is recommended on PPC Macs. - http://qt.nokia.com/downloads +http://qt.nokia.com/downloads -If you want debug frameworks, Qt also provides a dmg with these. These are in -addition to the non-debug frameworks. +If you want debug frameworks, Qt also provides a separate download with these. +These are in addition to the non-debug frameworks. -Once downloaded open the dmg and run the installer. Note you need admin +Once downloaded open the disk image and run the installer. Note you need admin privileges to install. Qt note: Starting in Qt 4.4, libQtCLucene was added, and in 4.5 @@ -1232,23 +1235,23 @@ CMAKE_MODULE_LINKER_FLAGS and CMAKE_EXE_LINKER_FLAGS in the cmake build. ========================================================= Download William Kyngesburye's excellent GDAL Complete package that includes -PROJ, GEOS, GDAL, SQLite3, and image libraries, as frameworks. There is also -a GSL framework. +PROJ, GEOS, GDAL, SQLite3, Spatialite, and image libraries, as frameworks. +There is also a GSL framework. - http://www.kyngchaos.com/wiki/software/frameworks +http://www.kyngchaos.com/wiki/software/frameworks Once downloaded, open and install the frameworks. -William provides an additional installer package for Postgresql (for PostGIS support). -Qgis just needs the libpq client library, so unless you want to setup the full -Postgres + PostGIS server, all you need is the client-only package. -It's available here: +William provides an additional installer package for Postgresql (for PostGIS +support). Qgis just needs the libpq client library, so unless you want to +setup the full Postgres + PostGIS server, all you need is the client-only +package. It's available here: - http://www.kyngchaos.com/wiki/software/postgres +http://www.kyngchaos.com/wiki/software/postgres Also available is a GRASS application: - http://www.kyngchaos.com/wiki/software/grass +http://www.kyngchaos.com/wiki/software/grass 5.2.1. Additional Dependencies: General compatibility note @@ -1274,9 +1277,10 @@ not necessary on Snow Leopard. Get the expat sources: - http://sourceforge.net/project/showfiles.php?group_id=10127 +http://sourceforge.net/project/showfiles.php?group_id=10127 -Double-click the source tarball to unpack, then, in Terminal.app, cd to the source folder and: +Double-click the source tarball to unpack, then, in Terminal.app, cd to the +source folder and: ./configure make @@ -1288,13 +1292,16 @@ Double-click the source tarball to unpack, then, in Terminal.app, cd to the sour Leopard and Snow Leopard note: Leopard and Snow Leopard include a usable Python 2.5 and 2.6, respectively. So there is no need to install Python on -Leopard and Snow Leopard. You can still install Python from python.org if preferred. +Leopard and Snow Leopard. You can still install Python from python.org if +preferred. -If installing from python.org, make sure you install at least the latest Python 2.x from +If installing from python.org, make sure you install at least the latest Python +2.x from - http://www.python.org/download/ +http://www.python.org/download/ -Python 3 is a major change, and may have compatibility issues, so try it at your own risk. +Python 3 is a major change, and may have compatibility issues, so try it at +your own risk. 5.2.4. Additional Dependencies: SIP @@ -1302,31 +1309,33 @@ Python 3 is a major change, and may have compatibility issues, so try it at your Retrieve the python bindings toolkit SIP from - http://www.riverbankcomputing.com/software/sip/download +http://www.riverbankcomputing.com/software/sip/download -Double-click the source tarball to unpack it, then, in Terminal.app, cd to the source folder -and (this installs by default into the Python framework, and is appropriate only for -python.org Python installs): +Double-click the source tarball to unpack it, then, in Terminal.app, +cd to the source folder. Then for your chosen Python: + +python.org Python python configure.py make sudo make install -Leopard notes +Leopard system Python -If building on Leopard, using Leopard's bundled Python, SIP wants to install in the -system path -- this is not a good idea. Use this configure command instead of the -basic configure above: +SIP wants to install in the system path -- this is not a good idea. +More configuration is needed to install outside the system path: python configure.py -n -d /Library/Python/2.5/site-packages -b /usr/local/bin \ -e /usr/local/include -v /usr/local/share/sip -s MacOSX10.5.sdk -Snow Leopard notes +Snow Leopard system Python Similar to Leopard, you should install outside the system Python path. -Also, you need to specify the architecture you want (requires at least SIP 4.9), -and make sure to run the versioned python binary (this one responds to the -'arch' command, 'python' does not). If you are using 32-bit Qt (Qt Carbon): +Also, you need to specify the architecture you want (requires at least SIP +4.9), and make sure to run the versioned python binary (this one responds to +the 'arch' command, 'python' does not). + +If you are using 32-bit Qt (Qt Carbon): python2.6 configure.py -n -d /Library/Python/2.6/site-packages -b /usr/local/bin \ -e /usr/local/include -v /usr/local/share/sip --arch=i386 -s MacOSX10.6.sdk @@ -1336,23 +1345,56 @@ For 64-bit Qt (Qt Cocoa), use this configure line: python2.6 configure.py -n -d /Library/Python/2.6/site-packages -b /usr/local/bin \ -e /usr/local/include -v /usr/local/share/sip --arch=x86_64 -s MacOSX10.6.sdk +continue... + +Then continue with compilation and installation: + + make + sudo make install + 5.2.5. Additional Dependencies: PyQt ==================================== Retrieve the python bindings toolkit for Qt from - http://www.riverbankcomputing.com/software/pyqt/download +http://www.riverbankcomputing.com/software/pyqt/download -Double-click the source tarball to unpack it, then, in Terminal.app, cd to the source folder -and (this installs by default into the Python framework, and is appropriate only for -python.org Python installs): +Double-click the source tarball to unpack it, then, in Terminal.app, +cd to the source folder. Then for your chosen Python: + +python.org Python python configure.py yes +Leopard system Python + +PyQt wants to install in the system path -- this is not a good idea. +More configuration is needed to install outside the system path: + + python configure.py -d /Library/Python/2.5/site-packages -b /usr/local/bin + +Snow Leopard system Python + +Similar to Leopard, you should install outside the system Python path. +Also, you need to specify the architecture you want (requires at least PyQt 4.6), +and make sure to run the versioned python binary (this one responds to the +'arch' command, which is important for pyuic4, 'python' does not). + +If you are using 32-bit Qt (Qt Carbon): + + python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch i386 + +For 64-bit Qt (Qt Cocoa), use this configure line: + + python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch x86_64 + +continue... + There is a problem with the configuration that needs to be fixed now -(it affects PyQwt compilation later). Edit pyqtconfig.py and change the qt_dir line to: +(it affects PyQwt compilation later). Edit pyqtconfig.py and change the qt_dir +line to: 'qt_dir': '/usr', @@ -1362,32 +1404,10 @@ parallel compilation, if you can): make sudo make install -Leopard notes - -If building on Leopard, using Leopard's bundled Python, PyQt wants to install -in the system path -- this is not a good idea. Use this configure command -instead of the basic configure above: - - python configure.py -d /Library/Python/2.5/site-packages -b /usr/local/bin - If there is a problem with undefined symbols in QtOpenGL on Leopard, edit QtOpenGL/makefile and add -undefined dynamic_lookup to LFLAGS. Then make again. -Snow Leopard notes - -Similar to Leopard, you should install outside the system Python path. -Also, you need to specify the architecture you want (requires at least PyQt 4.6), -and make sure to run the versioned python binary (this one responds to the -'arch' command, which is important for pyuic4, 'python' does not). -If you are using 32-bit Qt (Qt Carbon): - - python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch i386 - -For 64-bit Qt (Qt Cocoa), use this configure line: - - python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch x86_64 - 5.2.6. Additional Dependencies: Qwt/PyQwt ========================================= @@ -1395,43 +1415,31 @@ For 64-bit Qt (Qt Cocoa), use this configure line: The GPS tracking feature uses Qwt. Some popular 3rd-party plugins use PyQwt. You can take care of both with the PyQwt source from: - http://pyqwt.sourceforge.net/ +http://pyqwt.sourceforge.net/ -Double-click the tarball to unpack it. The following assumes PyQwt v5.2.0 (comes with Qwt 5.2.1). -Normal compilation does both Qwt and PyQwt at the same time, but Qwt is statically linked -into PyQwt, and Qgis can't use it. So, we need to split the build. +Double-click the tarball to unpack it. The following assumes PyQwt v5.2.0 +(comes with Qwt 5.2.1). Normal compilation does both Qwt and PyQwt at the same +time, but Qwt is statically linked into PyQwt, and Qgis can't use it. So, we +need to split the build. -First edit qwtconfig.pri in the qwt-5.2 subdir and change some settings so -you don't get a bloated debug static library (too bad they are not configurable from -qmake). Scroll down to the 'release/debug mode' block. Edit the last 'CONFIG +=' -line, within an 'else' block, and change 'debug' to 'release'. Like so: - - else { - CONFIG += release # release/debug - } - -Also uncomment (remove # prefix) the line 'CONFIG += QwtDll'. Like so: - - CONFIG += QwtDll - -If you are building for Qt Carbon 32bit on Snow Leopard, add a line at the bottom: - - CONFIG += x86 - -Save and close. - -Now, cd into the qwt-5.2 subdir in a Terminal. Type these commands to build and install: +Now, cd into the qwt-5.2 subdir in a Terminal. Type these commands to build +and install: + cat >> qwtconfig.pri <

Quantum GIS (QGIS)

Building QGIS from source - step by step

-

Thursday May 26, 2011

+

Sunday May 29, 2011

-Last Updated: Thursday May 26, 2011 -Last Change : Tuesday May 24, 2011 +Last Updated: Sunday May 29, 2011 +Last Change : Friday May 20, 2011

@@ -76,17 +76,16 @@ Last Change : Tuesday May 24, 2011
  • 4.2. Building using MinGW
  • 4.3. Creation of MSYS environment for compilation of Quantum GIS -
  • MacOS X: building using frameworks and Cmake +
  • Building on MacOS X -
  • Authors and Acknowledgments +
  • Authors and Acknowledgments
    • @@ -1645,29 +1644,30 @@ of space and it's not necessary at all.

    -

    5. MacOS X: building using frameworks and Cmake

    +

    5. Building on MacOS X

    In this approach I will try to avoid as much as possible building dependencies from source and rather use frameworks wherever possible.

    -The base system here is Mac OS X 10.4 (Tiger), with a single architecture build. -Included are a few notes for building on Mac OS X 10.5 (Leopard) and 10.6 (Snow Leopard). -Make sure to read each section completely before typing the first command you see. +The base system here is Mac OS X 10.4 (Tiger), with a single architecture +build. Included are notes for building on Mac OS X 10.5 (Leopard) and 10.6 +(Snow Leopard). Make sure to read each section completely before typing +the first command you see.

    General note on Terminal usage: When I say "cd" to a folder in a Terminal, it means type "cd " (without the quotes, make sure to type a space after) and -then type the path to said folder, then <return>. A simple way to do this without having to know -and type the full path is, after type the "cd " part, drag the folder (use the icon -in its window title bar, or drag a folder from within a window) from the Desktop -to the Terminal, then tap <return>. +then type the path to said folder, then <return>. A simple way to do this +without having to know and type the full path is, after type the "cd " part, +drag the folder (use the icon in its window title bar, or drag a folder from +within a window) from the Desktop to the Terminal, then tap <return>.

    -Parallel Compilation: On multiprocessor/multicore Macs, it's possible to speed -up compilation, but it's not automatic. Whenever you type "make" (but NOT "make install"), -instead type: +Parallel Compilation: On multiprocessor/multicore Macs, it's possible to +speed up compilation, but it's not automatic. Whenever you type "make" (but +NOT "make install"), instead type: 

    @@ -1687,10 +1687,12 @@ ie: Macbook Pro i5 (hyperthreading) = 2 cores X 2 = 4
 
    
 
 
-
    5.1. Install Qt4 from .dmg
    
+
    5.1. Install Qt4 from disk image
    
 
 
    
-You need a minimum of Qt-4.4.0. I suggest getting the latest.
+You need a minimum of Qt-4.4.0. I suggest getting the latest.  There is no need
+for the full Qt SDK, so save yourself some download time and get the frameworks
+only.
 
    
 
    
 Snow Leopard note: If you are building on Snow Leopard, you will need to
@@ -1699,20 +1701,19 @@ support in the Qt Cocoa branch. Appropriate installers are available for both
 as of Qt-4.5.2.  Qt 4.6+ is recommended for Cocoa.
 
    
 
    
-PPC note: There appear to be issues with Qt Cocoa on PPC Macs.  QT Carbon
-is recommended on PPC Macs.
-
    
-
-
    -http://qt.nokia.com/downloads
-
    
-
-
    
-If you want debug frameworks, Qt also provides a dmg with these.  These are in
-addition to the non-debug frameworks.
+PPC note: The readymade Qt Cocoa installers don't include PPC support, you'd
+have to compile Qt yourself.  But, there appear to be issues with Qt Cocoa on
+PPC Macs anyways.  Qt Carbon is recommended on PPC Macs.
 
    
 
    
-Once downloaded open the dmg and run the installer. Note you need admin
+http://qt.nokia.com/downloads
+
    
+
    
+If you want debug frameworks, Qt also provides a separate download with these.
+These are in addition to the non-debug frameworks.
+
    
+
    
+Once downloaded open the disk image and run the installer. Note you need admin
 privileges to install.
 
    
 
    
@@ -1738,35 +1739,30 @@ CMAKE_MODULE_LINKER_FLAGS and CMAKE_EXE_LINKER_FLAGS in the cmake build.
 
 
    
 Download William Kyngesburye's excellent GDAL Complete package that includes
-PROJ, GEOS, GDAL, SQLite3, and image libraries, as frameworks.  There is also
-a GSL framework.
+PROJ, GEOS, GDAL, SQLite3, Spatialite, and image libraries, as frameworks.
+There is also a GSL framework.
+
    
+
    
+http://www.kyngchaos.com/wiki/software/frameworks
 
    
-
-
    -http://www.kyngchaos.com/wiki/software/frameworks
-
    
-
 
    
 Once downloaded, open and install the frameworks.
 
    
 
    
-William provides an additional installer package for Postgresql (for PostGIS support).
-Qgis just needs the libpq client library, so unless you want to setup the full
-Postgres + PostGIS server, all you need is the client-only package.
-It's available here:
+William provides an additional installer package for Postgresql (for PostGIS
+support).  Qgis just needs the libpq client library, so unless you want to
+setup the full Postgres + PostGIS server, all you need is the client-only
+package.  It's available here:
+
    
+
    
+http://www.kyngchaos.com/wiki/software/postgres 
 
    
-
-
    -http://www.kyngchaos.com/wiki/software/postgres 
-
    
-
 
    
 Also available is a GRASS application:
 
    
-
-
    -http://www.kyngchaos.com/wiki/software/grass
-
    
+
    
+http://www.kyngchaos.com/wiki/software/grass
+
    
 
 
    5.2.1. Additional Dependencies: General compatibility note
    
 
@@ -1793,13 +1789,12 @@ not necessary on Snow Leopard.
 
    
 Get the expat sources:
 
    
-
-
    -http://sourceforge.net/project/showfiles.php?group_id=10127 
-
    
-
 
    
-Double-click the source tarball to unpack, then, in Terminal.app, cd to the source folder and:
+http://sourceforge.net/project/showfiles.php?group_id=10127 
+
    
+
    
+Double-click the source tarball to unpack, then, in Terminal.app, cd to the
+source folder and:
 
    
 
 
    @@ -1813,18 +1808,19 @@ sudo make install
 
    
 Leopard and Snow Leopard note: Leopard and Snow Leopard include a usable
 Python 2.5 and 2.6, respectively. So there is no need to install Python on
-Leopard and Snow Leopard. You can still install Python from python.org if preferred.
+Leopard and Snow Leopard. You can still install Python from python.org if
+preferred.
 
    
 
    
-If installing from python.org, make sure you install at least the latest Python 2.x from 
+If installing from python.org, make sure you install at least the latest Python
+2.x from 
 
    
-
-
    -http://www.python.org/download/
-
    
-
 
    
-Python 3 is a major change, and may have compatibility issues, so try it at your own risk.
+http://www.python.org/download/
+
    
+
    
+Python 3 is a major change, and may have compatibility issues, so try it at
+your own risk.
 
    
 
 
    5.2.4. Additional Dependencies: SIP
    
@@ -1832,15 +1828,15 @@ Python 3 is a major change, and may have compatibility issues, so try it at your
 
    
 Retrieve the python bindings toolkit SIP from
 
    
-
-
    -http://www.riverbankcomputing.com/software/sip/download
-
    
-
 
    
-Double-click the source tarball to unpack it, then, in Terminal.app, cd to the source folder
-and (this installs by default into the Python framework, and is appropriate only for 
-python.org Python installs):
+http://www.riverbankcomputing.com/software/sip/download
+
    
+
    
+Double-click the source tarball to unpack it, then, in Terminal.app,
+cd to the source folder.  Then for your chosen Python:
+
    
+
    
+python.org Python
 
    
 
 
    @@ -1850,12 +1846,11 @@ sudo make install
 
    
 
 
    
-Leopard notes
+Leopard system Python
 
    
 
    
-If building on Leopard, using Leopard's bundled Python, SIP wants to install in the
-system path -- this is not a good idea.  Use this configure command instead of the 
-basic configure above:
+SIP wants to install in the system path -- this is not a good idea.
+More configuration is needed to install outside the system path:
 
    
 
 
    @@ -1864,13 +1859,16 @@ python configure.py -n -d /Library/Python/2.5/site-packages -b /usr/local/bin \
 
    
 
 
    
-Snow Leopard notes
+Snow Leopard system Python
 
    
 
    
 Similar to Leopard, you should install outside the system Python path.
-Also, you need to specify the architecture you want (requires at least SIP 4.9),
-and make sure to run the versioned python binary (this one responds to the
-'arch' command, 'python' does not). If you are using 32-bit Qt (Qt Carbon):
+Also, you need to specify the architecture you want (requires at least SIP
+4.9), and make sure to run the versioned python binary (this one responds to
+the 'arch' command, 'python' does not).
+
    
+
    
+If you are using 32-bit Qt (Qt Carbon):
 
    
 
 
    @@ -1887,20 +1885,32 @@ python2.6 configure.py -n -d /Library/Python/2.6/site-packages -b /usr/local/bin
 -e /usr/local/include -v /usr/local/share/sip --arch=x86_64 -s MacOSX10.6.sdk
 
    
 
+
    
+continue...
+
    
+
    
+Then continue with compilation and installation:
+
    
+
+
    +make 
+sudo make install 
+
    
+
 
    5.2.5. Additional Dependencies: PyQt
    
 
 
    
 Retrieve the python bindings toolkit for Qt from
 
    
-
-
    -http://www.riverbankcomputing.com/software/pyqt/download
-
    
-
 
    
-Double-click the source tarball to unpack it, then, in Terminal.app, cd to the source folder
-and (this installs by default into the Python framework, and is appropriate only for
-python.org Python installs):
+http://www.riverbankcomputing.com/software/pyqt/download
+
    
+
    
+Double-click the source tarball to unpack it, then, in Terminal.app,
+cd to the source folder.  Then for your chosen Python:
+
    
+
    
+python.org Python
 
    
 
 
    @@ -1908,9 +1918,50 @@ python configure.py
 yes 
 
    
 
+
    
+Leopard system Python
+
    
+
    
+PyQt wants to install in the system path -- this is not a good idea.
+More configuration is needed to install outside the system path:
+
    
+
+
    +python configure.py -d /Library/Python/2.5/site-packages -b /usr/local/bin
+
    
+
+
    
+Snow Leopard system Python
+
    
+
    
+Similar to Leopard, you should install outside the system Python path.
+Also, you need to specify the architecture you want (requires at least PyQt 4.6),
+and make sure to run the versioned python binary (this one responds to the
+'arch' command, which is important for pyuic4, 'python' does not).
+
    
+
    
+If you are using 32-bit Qt (Qt Carbon):
+
    
+
+
    +python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch i386
+
    
+
+
    
+For 64-bit Qt (Qt Cocoa), use this configure line:
+
    
+
+
    +python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch x86_64
+
    
+
+
    
+continue...
+
    
 
    
 There is a problem with the configuration that needs to be fixed now
-(it affects PyQwt compilation later).  Edit pyqtconfig.py and change the qt_dir line to:
+(it affects PyQwt compilation later).  Edit pyqtconfig.py and change the qt_dir
+line to:
 
    
 
 
    @@ -1927,46 +1978,11 @@ make
 sudo make install 
 
    
 
-
    
-Leopard notes
-
    
-
    
-If building on Leopard, using Leopard's bundled Python, PyQt wants to install
-in the system path -- this is not a good idea.  Use this configure command
-instead of the basic configure above:
-
    
-
-
    -python configure.py -d /Library/Python/2.5/site-packages -b /usr/local/bin
-
    
-
 
    
 If there is a problem with undefined symbols in QtOpenGL on Leopard, edit
 QtOpenGL/makefile and add -undefined dynamic_lookup to LFLAGS.
 Then make again.
 
    
-
    
-Snow Leopard notes
-
    
-
    
-Similar to Leopard, you should install outside the system Python path.
-Also, you need to specify the architecture you want (requires at least PyQt 4.6),
-and make sure to run the versioned python binary (this one responds to the
-'arch' command, which is important for pyuic4, 'python' does not).
-If you are using 32-bit Qt (Qt Carbon):
-
    
-
-
    -python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch i386
-
    
-
-
    
-For 64-bit Qt (Qt Cocoa), use this configure line:
-
    
-
-
    -python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch x86_64
-
    
 
 
    5.2.6. Additional Dependencies: Qwt/PyQwt
    
 
@@ -1974,53 +1990,24 @@ python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --
 The GPS tracking feature uses Qwt.  Some popular 3rd-party plugins use PyQwt.
 You can take care of both with the PyQwt source from:
 
    
-
-
    -http://pyqwt.sourceforge.net/
-
    
-
 
    
-Double-click the tarball to unpack it.  The following assumes PyQwt v5.2.0 (comes with Qwt 5.2.1).
-Normal compilation does both Qwt and PyQwt at the same time, but Qwt is statically linked
-into PyQwt, and Qgis can't use it.  So, we need to split the build.
+http://pyqwt.sourceforge.net/
 
    
 
    
-First edit qwtconfig.pri in the qwt-5.2 subdir and change some settings so
-you don't get a bloated debug static library (too bad they are not configurable from
-qmake).  Scroll down to the 'release/debug mode' block.  Edit the last 'CONFIG +='
-line, within an 'else' block, and change 'debug' to 'release'.  Like so:
-
    
-
-
    -    else {
-        CONFIG           += release     # release/debug
-    }
-
    
-
-
    
-Also uncomment (remove # prefix) the line 'CONFIG += QwtDll'.  Like so:
-
    
-
-
    -CONFIG           += QwtDll
-
    
-
-
    
-If you are building for Qt Carbon 32bit on Snow Leopard, add a line at the bottom:
-
    
-
-
    -CONFIG += x86
-
    
-
-
    
-Save and close.
-
    
-
    
-Now, cd into the qwt-5.2 subdir in a Terminal.  Type these commands to build and install:
+Double-click the tarball to unpack it.  The following assumes PyQwt v5.2.0
+(comes with Qwt 5.2.1).  Normal compilation does both Qwt and PyQwt at the same
+time, but Qwt is statically linked into PyQwt, and Qgis can't use it.  So, we
+need to split the build.
+
    
+
    
+Now, cd into the qwt-5.2 subdir in a Terminal.  Type these commands to build
+and install:
 
    
 
 
    +cat >> qwtconfig.pri <<EOF
+CONFIG += release QwtDll
+EOF
 qmake -spec macx-g++
 make
 sudo make install
@@ -2029,11 +2016,13 @@ sudo install_name_tool -id /usr/local/qwt-5.2.1-svn/lib/libqwt.5.dylib \
 
    
 
 
    
-The Qwt shared library is now installed in /usr/local/qwt-5.x.x[-svn] (x.x is the 
-minor.point version, and it may be an SVN version).  Remember this for QGIS and PyQwt configuration.
+The Qwt shared library is now installed in /usr/local/qwt-5.x.x[-svn] (x.x is
+the  minor.point version, and it may be an SVN version).  Remember this for
+QGIS and PyQwt configuration.
 
    
 
    
-Now for PyQwt.  Still in the Terminal:
+Now for PyQwt.  Still in the Terminal (for all Pythons, except see Snow Leopard
+Carbon note below):
 
    
 
 
    @@ -2065,11 +2054,12 @@ python configure.py --extra-cflags="-arch i386" --extra-cxxflags="-arch i386" \
 
    5.2.7. Additional Dependencies: Bison
    
 
 
    
-Leopard and Snow Leopard note: Leopard and Snow Leopard include Bison 2.3, so this step can be skipped on Leopard and Snow Leopard.
+Leopard and Snow Leopard note: Leopard and Snow Leopard include Bison 2.3,
+so this step can be skipped on Leopard and Snow Leopard.
 
    
 
    
-The version of bison available by default on Mac OS X 10.4 is too old so you need to
-get a more recent one on your system. Download at least version 2.3 from:
+The version of bison available by default on Mac OS X 10.4 is too old so you
+need to get a more recent one on your system. Download at least version 2.3 from:
 
    
 
 
    @@ -2093,16 +2083,14 @@ sudo make install
 
    
 Get the latest source release from here:
 
    
-
-
    -http://www.cmake.org/cmake/resources/software.html
-
    
-
+
    
+http://www.cmake.org/cmake/resources/software.html
+
    
 
    
 Binary installers are available for OS X, but they are not recommended
-(2.4 versions install in /usr instead of /usr/local, and 2.6 versions are a
-strange application). Instead, download the source, double-click the source tarball,
-then cd to the source folder and:
+(2.4 versions install in /usr instead of /usr/local, and 2.6+ versions are a
+strange application). Instead, download the source, double-click the source
+tarball, then cd to the source folder and:
 
    
 
 
    @@ -2112,131 +2100,38 @@ sudo make install
 
    
 
 
-
    5.4. Install subversion for OSX
    
+
    5.4. Download QGIS source from github
    
 
 
    
-Leopard and Snow Leopard note: Leopard and Snow Leopard (Xcode 3+)
-include SVN, so this step can be skipped on Leopard and Snow Leopard.
+Go to the github QGIS project page:
 
    
 
    
-The [http://sourceforge.net/projects/macsvn/MacSVN] project has a downloadable
-build of svn. If you are a GUI inclined person you may want to grab their gui
-client too. Get the command line client here:
-
    
-
-
    -curl -O http://ufpr.dl.sourceforge.net/sourceforge/macsvn/Subversion_1.4.2.zip 
-
    
-
-
    
-Once downloaded open the zip file and run the installer.
+http://github.com/qgis/Quantum-GIS
 
    
 
    
-You also need to install BerkleyDB available from the same
-http://sourceforge.net/projects/macsvn/. At the time of writing the
-file was here:
-
    
-
-
    -curl -O http://ufpr.dl.sourceforge.net/sourceforge/macsvn/Berkeley_DB_4.5.20.zip 
-
    
-
-
    
-Once again unzip this and run the installer therein.
+It should default to the master branch.  Click the Downloads button and
+select Download .tar.gz.
 
    
 
    
-Lastly we need to ensure that the svn commandline executeable is in the path.
-Add the following line to the end of /etc/bashrc using sudo:
-
    
-
-
    -sudo vim /etc/bashrc 
-
    
-
-
    
-And add this line to the bottom before saving and quiting:
-
    
-
-
    -export PATH=/usr/local/bin:$PATH:/usr/local/pgsql/bin 
-
    
-
-
    
-/usr/local/bin needs to be first in the path so that the newer bison (that will
-be built from source further down) is found before the bison (which is very
-old) that is installed by MacOSX
-
    
-
    
-Now close and reopen your shell to get the updated vars.
+Double-click the tarball to unzip it.
 
    
 
 
-
    5.5. Check out QGIS from SVN
    
-
-
    
-Now we are going to check out the sources for QGIS. First we will create a
-directory for working in (or some folder of your choice):
-
    
-
-
    -mkdir -p ~/dev/cpp cd ~/dev/cpp 
-
    
-
-
    
-Now we check out the sources:
-
    
-
    
-Trunk:
-
    
-
-
    -svn co https://svn.osgeo.org/qgis/trunk/qgis qgis 
-
    
-
-
    
-For a release branch version x.y.z:
-
    
-
-
    -svn co https://svn.qgis.org/qgis/branches/Release-x_y_z qgis-x.y.z
-
    
-
-
    
-The first time you check out QGIS sources you will probably get a message like
-this:
-
    
-
-
    - Error validating server certificate for 'https://svn.qgis.org:443':
- - The certificate is not issued by a trusted authority. Use the fingerprint to
-   validate the certificate manually!  Certificate information:
- - Hostname: svn.qgis.org
- - Valid: from Apr  1 00:30:47 2006 GMT until Mar 21 00:30:47 2008 GMT
- - Issuer: Developer Team, Quantum GIS, Anchorage, Alaska, US
- - Fingerprint: 2f:cd:f1:5a:c7:64:da:2b:d1:34:a5:20:c6:15:67:28:33:ea:7a:9b
-   (R)eject, accept (t)emporarily or accept (p)ermanently?  
-
    
-
-
    
-I suggest you press 'p' to accept the key permanently.
-
    
-
-
-
    5.6. Configure the build
    
+
    5.5. Configure the build
    
 
 
    
 CMake supports out of source build so we will create a 'build' dir for the
-build process. OS X uses ${HOME}/Applications as a standard user app folder (it gives it the system app folder icon).
-If you have the correct permissions you may want to build
-straight into your /Applications folder. The instructions below assume you are
-building into a pre-existing ${HOME}/Applications directory.
+build process. OS X uses ${HOME}/Applications as a standard user app folder (it
+gives it the system app folder icon).  If you have the correct permissions you
+may want to build straight into your /Applications folder. The instructions
+below assume you are building into a pre-existing ${HOME}/Applications directory.
 In a Terminal cd to the qgis source folder previously downloaded, then:
 
    
 
 
     mkdir build
 cd build
-cmake -D CMAKE_INSTALL_PREFIX=~/Applications -D CMAKE_BUILD_TYPE=Release \
+cmake -D CMAKE_INSTALL_PREFIX=~/Applications \
 -D CMAKE_BUILD_TYPE=MinSizeRel \
 -D WITH_INTERNAL_SPATIALITE=FALSE -D WITH_MAPSERVER=TRUE \
 -D QWT_LIBRARY=/usr/local/qwt-5.2.1-svn/lib/libqwt.dylib \
@@ -2245,8 +2140,8 @@ cmake -D CMAKE_INSTALL_PREFIX=~/Applications -D CMAKE_BUILD_TYPE=Release \
 
    
 
 
    
-This will automatically find and use the previously installed frameworks, and the GRASS
-application if installed.
+This will automatically find and use the previously installed frameworks, and
+the GRASS application if installed.
 
    
 
    
 Or, to use a Unix-style build of GRASS, use the following cmake invocation
@@ -2260,7 +2155,7 @@ cmake -D CMAKE_INSTALL_PREFIX=~/Applications -D CMAKE_BUILD_TYPE=Release \
 -D WITH_INTERNAL_SPATIALITE=FALSE -D WITH_MAPSERVER=TRUE \
 -D QWT_LIBRARY=/usr/local/qwt-5.2.1-svn/lib/libqwt.dylib \
 -D QWT_INCLUDE_DIR=/usr/local/qwt-5.2.1-svn/include \
--D GRASS_PREFIX=/user/local/grass-6.4.0 \
+-D GRASS_PREFIX=/user/local/grass-6.4.1 \
 ..
 
    
 
@@ -2277,7 +2172,7 @@ EOF
 
 sudo chmod +x /usr/local/bin/python32
 
-cmake -D CMAKE_INSTALL_PREFIX=~/Applications -D CMAKE_BUILD_TYPE=Release \
+cmake -D CMAKE_INSTALL_PREFIX=~/Applications -D \
 -D CMAKE_BUILD_TYPE=MinSizeRel \
 -D WITH_INTERNAL_SPATIALITE=FALSE -D WITH_MAPSERVER=TRUE \
 -D QWT_LIBRARY=/usr/local/qwt-5.2.1-svn/lib/libqwt.dylib \
@@ -2287,22 +2182,32 @@ cmake -D CMAKE_INSTALL_PREFIX=~/Applications -D CMAKE_BUILD_TYPE=Release \
 
    
 
 
    
-Bundling note: Older Qt versions may have problems with some Qt plugins and Qgis.
-The way to handle this is to bundle Qt inside the Qgis application.  You can do this now
-or wait to see if there are immediate crashes when running Qgis.  It's also a good
-idea to bundle Qt if you need to copy Qgis to other Macs (where you would have to
-install Xcode just so Qt would install!).
+Bundling note: Older Qt versions may have problems with some Qt plugins and
+Qgis.  The way to handle this is to bundle Qt inside the Qgis application.  You
+can do this now or wait to see if there are immediate crashes when running Qgis.
+It's also a good idea to bundle Qt if you need to copy Qgis to other Macs (where
+you would have to install Xcode just so Qt would install!).
 
    
 
    
-To bundle Qt, add the following line before the last line in the above cmake configurations:
+To bundle Qt, add the following line before the last line (the ".." line) in
+the above cmake configurations:
 
    
 
 
     -D QGIS_MACAPP_BUNDLE=1 \
 
    
 
-
-
    5.7. Building
    
+
    
+Even better for distribution purposes, to also bundle any extra non-framework,
+non-standard, libs (ie postgres' libpq) bump the bundle number to 2:
+
    
+
+
    +-D QGIS_MACAPP_BUNDLE=2 \
+
    
+
+
+
    5.6. Building
    
 
 
    
 Now we can start the build process (remember the parallel compilation note at
@@ -2322,14 +2227,14 @@ make install
 
    
 
 
    
-or, for a /Applications build:
+or, for an /Applications build:
 
    
 
 
     sudo make install
 
    
 
-
+
 
    6. Authors and Acknowledgments
    
 
 
    
@@ -2379,5 +2284,5 @@ The following people have contributed to this document:
    - + diff --git a/doc/osx.t2t b/doc/osx.t2t index f247ed22581..9ae565bdbdc 100644 --- a/doc/osx.t2t +++ b/doc/osx.t2t @@ -1,23 +1,24 @@ -= MacOS X: building using frameworks and Cmake = += Building on MacOS X = In this approach I will try to avoid as much as possible building dependencies from source and rather use frameworks wherever possible. -The base system here is Mac OS X 10.4 (__Tiger__), with a single architecture build. -Included are a few notes for building on Mac OS X 10.5 (__Leopard__) and 10.6 (__Snow Leopard__). -Make sure to read each section completely before typing the first command you see. +The base system here is Mac OS X 10.4 (__Tiger__), with a single architecture +build. Included are notes for building on Mac OS X 10.5 (__Leopard__) and 10.6 +(__Snow Leopard__). Make sure to read each section completely before typing +the first command you see. __General note on Terminal usage:__ When I say "cd" to a folder in a Terminal, it means type "cd " (without the quotes, make sure to type a space after) and -then type the path to said folder, then . A simple way to do this without having to know -and type the full path is, after type the "cd " part, drag the folder (use the icon -in its window title bar, or drag a folder from within a window) from the Desktop -to the Terminal, then tap . +then type the path to said folder, then . A simple way to do this +without having to know and type the full path is, after type the "cd " part, +drag the folder (use the icon in its window title bar, or drag a folder from +within a window) from the Desktop to the Terminal, then tap . -__Parallel Compilation:__ On multiprocessor/multicore Macs, it's possible to speed -up compilation, but it's not automatic. Whenever you type "make" (but NOT "make install"), -instead type: +__Parallel Compilation:__ On multiprocessor/multicore Macs, it's possible to +speed up compilation, but it's not automatic. Whenever you type "make" (but +NOT "make install"), instead type: ``` make -j [n] @@ -31,26 +32,27 @@ ie: Mac Pro "8 Core" model (2 quad core processors) = 8 ie: Macbook Pro i5 (hyperthreading) = 2 cores X 2 = 4 -== Install Qt4 from .dmg == +== Install Qt4 from disk image == -You need a minimum of Qt-4.4.0. I suggest getting the latest. +You need a minimum of Qt-4.4.0. I suggest getting the latest. There is no need +for the full Qt SDK, so save yourself some download time and get the frameworks +only. __Snow Leopard note:__ If you are building on Snow Leopard, you will need to decide between 32-bit support in the older, Qt Carbon branch, or 64-bit support in the Qt Cocoa branch. Appropriate installers are available for both as of Qt-4.5.2. Qt 4.6+ is recommended for Cocoa. -__PPC note:__ There appear to be issues with Qt Cocoa on PPC Macs. QT Carbon -is recommended on PPC Macs. +__PPC note:__ The readymade Qt Cocoa installers don't include PPC support, you'd +have to compile Qt yourself. But, there appear to be issues with Qt Cocoa on +PPC Macs anyways. Qt Carbon is recommended on PPC Macs. -``` http://qt.nokia.com/downloads -``` -If you want debug frameworks, Qt also provides a dmg with these. These are in -addition to the non-debug frameworks. +If you want debug frameworks, Qt also provides a separate download with these. +These are in addition to the non-debug frameworks. -Once downloaded open the dmg and run the installer. Note you need admin +Once downloaded open the disk image and run the installer. Note you need admin privileges to install. __Qt note:__ Starting in Qt 4.4, libQtCLucene was added, and in 4.5 @@ -71,29 +73,23 @@ CMAKE_MODULE_LINKER_FLAGS and CMAKE_EXE_LINKER_FLAGS in the cmake build. == Install development frameworks for QGIS dependencies == Download William Kyngesburye's excellent GDAL Complete package that includes -PROJ, GEOS, GDAL, SQLite3, and image libraries, as frameworks. There is also -a GSL framework. +PROJ, GEOS, GDAL, SQLite3, Spatialite, and image libraries, as frameworks. +There is also a GSL framework. -``` http://www.kyngchaos.com/wiki/software/frameworks -``` Once downloaded, open and install the frameworks. -William provides an additional installer package for Postgresql (for PostGIS support). -Qgis just needs the libpq client library, so unless you want to setup the full -Postgres + PostGIS server, all you need is the client-only package. -It's available here: +William provides an additional installer package for Postgresql (for PostGIS +support). Qgis just needs the libpq client library, so unless you want to +setup the full Postgres + PostGIS server, all you need is the client-only +package. It's available here: -``` http://www.kyngchaos.com/wiki/software/postgres -``` Also available is a GRASS application: -``` http://www.kyngchaos.com/wiki/software/grass -``` === Additional Dependencies: General compatibility note === @@ -115,11 +111,10 @@ not necessary on Snow Leopard. Get the expat sources: -``` http://sourceforge.net/project/showfiles.php?group_id=10127 -``` -Double-click the source tarball to unpack, then, in Terminal.app, cd to the source folder and: +Double-click the source tarball to unpack, then, in Terminal.app, cd to the +source folder and: ``` ./configure @@ -131,27 +126,27 @@ sudo make install __Leopard and Snow Leopard note:__ Leopard and Snow Leopard include a usable Python 2.5 and 2.6, respectively. So there is no need to install Python on -Leopard and Snow Leopard. You can still install Python from python.org if preferred. +Leopard and Snow Leopard. You can still install Python from python.org if +preferred. -If installing from python.org, make sure you install at least the latest Python 2.x from +If installing from python.org, make sure you install at least the latest Python +2.x from -``` http://www.python.org/download/ -``` -Python 3 is a major change, and may have compatibility issues, so try it at your own risk. +Python 3 is a major change, and may have compatibility issues, so try it at +your own risk. === Additional Dependencies: SIP === Retrieve the python bindings toolkit SIP from -``` http://www.riverbankcomputing.com/software/sip/download -``` -Double-click the source tarball to unpack it, then, in Terminal.app, cd to the source folder -and (this installs by default into the Python framework, and is appropriate only for -python.org Python installs): +Double-click the source tarball to unpack it, then, in Terminal.app, +cd to the source folder. Then for your chosen Python: + +__python.org Python__ ``` python configure.py @@ -159,23 +154,24 @@ make sudo make install ``` -__Leopard notes__ +__Leopard system Python__ -If building on Leopard, using Leopard's bundled Python, SIP wants to install in the -system path -- this is not a good idea. Use this configure command instead of the -basic configure above: +SIP wants to install in the system path -- this is not a good idea. +More configuration is needed to install outside the system path: ``` python configure.py -n -d /Library/Python/2.5/site-packages -b /usr/local/bin \ -e /usr/local/include -v /usr/local/share/sip -s MacOSX10.5.sdk ``` -__Snow Leopard notes__ +__Snow Leopard system Python__ Similar to Leopard, you should install outside the system Python path. -Also, you need to specify the architecture you want (requires at least SIP 4.9), -and make sure to run the versioned python binary (this one responds to the -'arch' command, 'python' does not). If you are using 32-bit Qt (Qt Carbon): +Also, you need to specify the architecture you want (requires at least SIP +4.9), and make sure to run the versioned python binary (this one responds to +the 'arch' command, 'python' does not). + +If you are using 32-bit Qt (Qt Carbon): ``` python2.6 configure.py -n -d /Library/Python/2.6/site-packages -b /usr/local/bin \ @@ -189,26 +185,64 @@ python2.6 configure.py -n -d /Library/Python/2.6/site-packages -b /usr/local/bin -e /usr/local/include -v /usr/local/share/sip --arch=x86_64 -s MacOSX10.6.sdk ``` +__continue...__ + +Then continue with compilation and installation: + +``` +make +sudo make install +``` === Additional Dependencies: PyQt === Retrieve the python bindings toolkit for Qt from -``` http://www.riverbankcomputing.com/software/pyqt/download -``` -Double-click the source tarball to unpack it, then, in Terminal.app, cd to the source folder -and (this installs by default into the Python framework, and is appropriate only for -python.org Python installs): +Double-click the source tarball to unpack it, then, in Terminal.app, +cd to the source folder. Then for your chosen Python: + +__python.org Python__ ``` python configure.py yes ``` +__Leopard system Python__ + +PyQt wants to install in the system path -- this is not a good idea. +More configuration is needed to install outside the system path: + +``` +python configure.py -d /Library/Python/2.5/site-packages -b /usr/local/bin +``` + +__Snow Leopard system Python__ + +Similar to Leopard, you should install outside the system Python path. +Also, you need to specify the architecture you want (requires at least PyQt 4.6), +and make sure to run the versioned python binary (this one responds to the +'arch' command, which is important for pyuic4, 'python' does not). + +If you are using 32-bit Qt (Qt Carbon): + +``` +python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch i386 +``` + +For 64-bit Qt (Qt Cocoa), use this configure line: + +``` +python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch x86_64 +``` + +__continue...__ + There is a problem with the configuration that needs to be fixed now -(it affects PyQwt compilation later). Edit pyqtconfig.py and change the qt_dir line to: +(it affects PyQwt compilation later). Edit pyqtconfig.py and change the qt_dir +line to: ``` 'qt_dir': '/usr', @@ -222,80 +256,30 @@ make sudo make install ``` -__Leopard notes__ - -If building on Leopard, using Leopard's bundled Python, PyQt wants to install -in the system path -- this is not a good idea. Use this configure command -instead of the basic configure above: - -``` -python configure.py -d /Library/Python/2.5/site-packages -b /usr/local/bin -``` - If there is a problem with undefined symbols in QtOpenGL on Leopard, edit QtOpenGL/makefile and add ""-undefined dynamic_lookup"" to LFLAGS. Then make again. -__Snow Leopard notes__ - -Similar to Leopard, you should install outside the system Python path. -Also, you need to specify the architecture you want (requires at least PyQt 4.6), -and make sure to run the versioned python binary (this one responds to the -'arch' command, which is important for pyuic4, 'python' does not). -If you are using 32-bit Qt (Qt Carbon): - -``` -python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch i386 -``` - -For 64-bit Qt (Qt Cocoa), use this configure line: - -``` -python2.6 configure.py -d /Library/Python/2.6/site-packages -b /usr/local/bin --use-arch x86_64 -``` - === Additional Dependencies: Qwt/PyQwt === The GPS tracking feature uses Qwt. Some popular 3rd-party plugins use PyQwt. You can take care of both with the PyQwt source from: -``` http://pyqwt.sourceforge.net/ -``` -Double-click the tarball to unpack it. The following assumes PyQwt v5.2.0 (comes with Qwt 5.2.1). -Normal compilation does both Qwt and PyQwt at the same time, but Qwt is statically linked -into PyQwt, and Qgis can't use it. So, we need to split the build. +Double-click the tarball to unpack it. The following assumes PyQwt v5.2.0 +(comes with Qwt 5.2.1). Normal compilation does both Qwt and PyQwt at the same +time, but Qwt is statically linked into PyQwt, and Qgis can't use it. So, we +need to split the build. -First edit qwtconfig.pri in the qwt-5.2 subdir and change some settings so -you don't get a bloated debug static library (too bad they are not configurable from -qmake). Scroll down to the 'release/debug mode' block. Edit the last 'CONFIG +=' -line, within an 'else' block, and change 'debug' to 'release'. Like so: - -``` - else { - CONFIG += release # release/debug - } -``` - -Also uncomment (remove # prefix) the line 'CONFIG += QwtDll'. Like so: - -``` -CONFIG += QwtDll -``` - -If you are building for Qt Carbon 32bit on Snow Leopard, add a line at the bottom: - -``` -CONFIG += x86 -``` - -Save and close. - -Now, cd into the qwt-5.2 subdir in a Terminal. Type these commands to build and install: +Now, cd into the qwt-5.2 subdir in a Terminal. Type these commands to build +and install: ``` +cat >> qwtconfig.pri <