diff --git a/doc/TRANSLATORS b/doc/TRANSLATORS
index 6fe18d6795f..515ca103fad 100644
--- a/doc/TRANSLATORS
+++ b/doc/TRANSLATORS
@@ -1,60 +1,60 @@
Language Finished % Translators German Jürgen E. Fischer, Stephan Holl, Otto Dassau, Werner Macho Japanese BABA Yoshihiko, Yoichi Kayama, Minoru Akagi, Takayuki Nuimura, Takayuki Mizutani, Norihiro Yamate Dutch Richard Duivenvoorde, Raymond Nijssen, Carlo van Rijswijk, Diethard Jansen, Willem Hoffmans, Dick Groskamp Portuguese (Portugal) Giovanni Manghi, Joana Simões, Duarte Carreira, Alexandre Neto, Pedro Pereira, Pedro Palheiro, Nelson Silva, Ricardo Sena, Leandro Infantini, João Gaspar Korean OSGeo Korean Chapter Finnish Kari Salovaara, Marko Järvenpää Italian Roberto Angeletti, Michele Beneventi, Marco Braida, Stefano Campus, Luca Casagrande, Paolo Cavallini, Giuliano Curti, Luca Delucchi, Alessandro Fanna, Michele Ferretti, Matteo Ghetta, Anne Gishla, Maurizio Napolitano, Flavio Rigolon Portuguese (Brazil) Sidney Schaberle Goveia, Arthur Nanni, Marcelo Soares Souza, Narcélio de Sá Pereira Filho, Leônidas Descovi Filho, Felipe Sodré Barros Galician Xan Vieiro Polish Robert Szczepanek, Milena Nowotarska, Borys Jurgiel, Mateusz Łoskot, Tomasz Paul, Andrzej Świąder Spanish Carlos Dávila, Javier César Aldariz, Gabriela Awad, Edwin Amado, Mayeul Kauffmann, Diana Galindo Russian Alexander Bruy, Artem Popov French Stéphane Brunner, Olivier Dalang, Nicolas Damien, Michael Douchin, Régis Haubourg, Matthias Khun, Sylvain Maillard, Jean-Roc Morreale, Mehdi Semchaoui Bokmal, Norwegian James Stott, Maléne Peterson Basque Asier Sarasua Garmendia, Irantzu Alvarez Hungarian Zoltan Siki Danish Jacob Overgaard Madsen, Bo Victor Thomsen Swedish Lars Luthman, Magnus Homann, Victor Axbom Indonesian Emir Hartato, Muhammad Iqnaul Haq Siregar, Trias Aditya, Januar V. Simarmata, I Made Anombawa Bosnian Almir Karabegovic Chinese (China) Calvin Ngei, Zhang Jun, Richard Xie Czech Jan Helebrant, Martin Landa, Peter Antolik, Martin Dzurov, Stanislav Horáček Lithuanian Paulius Litvinas, Tomas Straupis, Kestas M Slovenian Jože Detečnik, Dejan Gregor, Jaka Kranjc Estonian Veiko Viil Latvian Maris Nartiss, Pēteris Brūns Slovak Lubos Balazovic, Jana Kormanikova, Ivan Mincik Turkish Osman Yalçın YILMAZ Chinese (Taiwan, Province of China) Nung-yao Lin Croatian Zoran Jankovic Serbian (latin) Goran Ivanković Serbian (cyrillic) Goran Ivanković Modern Greek (1453-) Theodoros Vakkas, Ioannis Tsimpiris, Evripidis Argyropoulos, Mike Pegnigiannis, Nikos Ves Central Khmer Khoem Sokhem Romanian Sorin Călinică, Lonut Losifescu-Enescu, Bogdan Pacurar Ukrainian Alexander Bruy Thai Man Chao Icelandic Ásta Kristín Óladóttir, Thordur Ivarsson Vietnamese Phan Anh, Bùi Hữu Mạnh Persian Mola Pahnadayan, Masoud Pashotan , Masoud Erfanyan Arabic Ichaouia Amine, Hosham Munier Mongolian Bayarmaa Enkhtur Georgian Shota Murtskhvaladze, George Machitidze Bulgarian Захари Савов, Jordan Tzvetkov Catalan Albert F, Pau Reguant Ridó, Xavier Roijals Albanian (orphaned) Lao Anousak Souphavanh, Soukanh Lathsavong Hindi Harish Kumar Solanki Malayalam Vinayan Parameswaran Tagalog Kathrina Gregana Afrikaans (orphaned) Hebrew (orphaned) Bengali (orphaned) Marathi (orphaned) Swahili (macrolanguage) (orphaned) Tamil (orphaned) Telugu (orphaned) Xhosa (orphaned)
+German Jürgen E. Fischer, Stephan Holl, Otto Dassau, Werner Macho Japanese BABA Yoshihiko, Yoichi Kayama, Minoru Akagi, Takayuki Nuimura, Takayuki Mizutani, Norihiro Yamate Dutch Richard Duivenvoorde, Raymond Nijssen, Carlo van Rijswijk, Diethard Jansen, Willem Hoffmans, Dick Groskamp Portuguese (Portugal) Giovanni Manghi, Joana Simões, Duarte Carreira, Alexandre Neto, Pedro Pereira, Pedro Palheiro, Nelson Silva, Ricardo Sena, Leandro Infantini, João Gaspar Korean OSGeo Korean Chapter Finnish Kari Salovaara, Marko Järvenpää Italian Roberto Angeletti, Michele Beneventi, Marco Braida, Stefano Campus, Luca Casagrande, Paolo Cavallini, Giuliano Curti, Luca Delucchi, Alessandro Fanna, Michele Ferretti, Matteo Ghetta, Anne Gishla, Maurizio Napolitano, Flavio Rigolon Portuguese (Brazil) Sidney Schaberle Goveia, Arthur Nanni, Marcelo Soares Souza, Narcélio de Sá Pereira Filho, Leônidas Descovi Filho, Felipe Sodré Barros Galician Xan Vieiro Polish Robert Szczepanek, Milena Nowotarska, Borys Jurgiel, Mateusz Łoskot, Tomasz Paul, Andrzej Świąder Spanish Carlos Dávila, Javier César Aldariz, Gabriela Awad, Edwin Amado, Mayeul Kauffmann, Diana Galindo Russian Alexander Bruy, Artem Popov French Stéphane Brunner, Olivier Dalang, Nicolas Damien, Michael Douchin, Régis Haubourg, Matthias Khun, Sylvain Maillard, Jean-Roc Morreale, Mehdi Semchaoui Bokmal, Norwegian James Stott, Maléne Peterson Basque Asier Sarasua Garmendia, Irantzu Alvarez Hungarian Zoltan Siki Danish Jacob Overgaard Madsen, Bo Victor Thomsen Swedish Lars Luthman, Magnus Homann, Victor Axbom Indonesian Emir Hartato, Muhammad Iqnaul Haq Siregar, Trias Aditya, Januar V. Simarmata, I Made Anombawa Bosnian Almir Karabegovic Chinese (China) Calvin Ngei, Zhang Jun, Richard Xie Czech Jan Helebrant, Martin Landa, Peter Antolik, Martin Dzurov, Stanislav Horáček Lithuanian Paulius Litvinas, Tomas Straupis, Kestas M Slovenian Jože Detečnik, Dejan Gregor, Jaka Kranjc Estonian Veiko Viil Latvian Maris Nartiss, Pēteris Brūns Slovak Lubos Balazovic, Jana Kormanikova, Ivan Mincik Turkish Osman Yalçın YILMAZ Chinese (Taiwan, Province of China) Nung-yao Lin Croatian Zoran Jankovic Serbian (latin) Goran Ivanković Serbian (cyrillic) Goran Ivanković Modern Greek (1453-) Theodoros Vakkas, Ioannis Tsimpiris, Evripidis Argyropoulos, Mike Pegnigiannis, Nikos Ves Central Khmer Khoem Sokhem Romanian Sorin Călinică, Lonut Losifescu-Enescu, Bogdan Pacurar Ukrainian Alexander Bruy Thai Man Chao Icelandic Ásta Kristín Óladóttir, Thordur Ivarsson Arabic Ichaouia Amine, Hosham Munier Vietnamese Phan Anh, Bùi Hữu Mạnh Persian Mola Pahnadayan, Masoud Pashotan , Masoud Erfanyan Mongolian Bayarmaa Enkhtur Georgian Shota Murtskhvaladze, George Machitidze Bulgarian Захари Савов, Jordan Tzvetkov Catalan Albert F, Pau Reguant Ridó, Xavier Roijals Albanian (orphaned) Lao Anousak Souphavanh, Soukanh Lathsavong Hindi Harish Kumar Solanki Malayalam Vinayan Parameswaran Tagalog Kathrina Gregana Afrikaans (orphaned) Hebrew (orphaned) Bengali (orphaned) Marathi (orphaned) Swahili (macrolanguage) (orphaned) Tamil (orphaned) Telugu (orphaned) Xhosa (orphaned)
+
APIsDialogPythonConsole
Generating prepared API file (please wait)...
-
@@ -14,7 +12,7 @@
<p>Character: <span style="font-size: 24pt; font-family: %1">%2</span><p>Value: 0x%3
-
@@ -25,15 +23,15 @@
Setting
-
Value
- قيمة
+
Providers
-
Wrong value
@@ -50,7 +48,7 @@
ConnectionItem
Unable to connect
-
@@ -96,7 +94,7 @@
Click to enable mouse tracking. Click the canvas to stop
-
DBManager
Sorry
- آسف
+
No database selected or you are not connected to it.
-
Select the table you want export to file.
-
DB Manager
-
Info
- معلومات
+
Table
- جدول
+
Preview
- معاينة
+
&Database
- &قاعدة بيانات
+
&Schema
-
&Table
-
&Refresh
-
&SQL window
-
&Exit
-
&Import layer/file
-
&Export to file
-
DBManagerPlugin
Sorry
- آسف
+
Unable to find a valid unique field
-
Copy
- نسخ
+
DB Manager
-
Server version:
-
Host:
-
User:
-
Library:
-
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
-
create new schemas
-
create temporary tables
-
Not connected
-
Connection details
-
General info
-
<warning> %s support not enabled!
-
<warning> This user has no privileges!
-
User has privileges:
-
Privileges
-
Owner:
-
Comment:
-
create new objects
-
access objects
-
Schema details
-
<warning> This user has no privileges to access this schema!
-
Relation type:
-
View
- عرض
+
Table
- جدول
+
Rows:
-
Unknown (<a href="action:rows/count">find out</a>)
-
Name
-
Type
- نوع
+
Null
-
Default
- افتراضي
+
Column(s)
-
Function
-
<warning> This is not a spatial table.
-
Fields
-
Constraints
- القيود
+
Indexes
- المؤشرات
+
Triggers
-
View definition
-
Column:
-
Geometry:
-
Dimension:
-
Undefined
-
Spatial ref:
-
Estimated extent:
-
(unknown) (<a href="action:extent/get">find out</a>)
-
Extent:
-
<warning> There isn't entry in geometry_columns!
-
<warning> No spatial index defined (<a href="action:spatialindex/create">create it</a>)
-
Pages:
-
Rows (estimation):
-
Privileges:
-
<warning> This user doesn't have usage privileges for this schema!
-
Rows (counted):
-
<warning> This user has read-only privileges.
-
<warning> There's a significant difference between estimated and real row count. Consider running <a href="action:vacuumanalyze/run">VACUUM ANALYZE</a>.
-
<warning> No primary key defined for this table!
-
Scripts:
-
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
-
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
-
Length
- طول
+
Enabled
-
Yes
-
No
-
<a href="action:triggers/enable">Enable all triggers</a> / <a href="action:triggers/disable">Disable all triggers</a>
-
Definition
-
Rules
-
&Versioning
-
&Table
-
"{0}" not found
-
Filename:
-
SQLite version:
-
Error:
%s
-
Query:
%s
-
&Re-connect
-
&Database
- &قاعدة بيانات
+
&Create schema
-
&Schema
-
&Delete (empty) schema
-
Delete selected item
-
&Create table
-
&Edit table
-
&Delete table/view
-
&Empty table
-
&Move to schema
-
Cannot delete the selected item.
-
No database selected or you are not connected to it.
-
New schema
-
Enter new schema name
-
Select an empty SCHEMA for deletion.
-
hey!
-
Really delete schema %s?
-
Select a TABLE for editation.
-
Select a TABLE/VIEW for deletion.
-
Really delete table/view %s?
-
Select a TABLE to empty it.
-
Really delete all items from table %s?
-
Select a TABLE/VIEW.
-
Do you want to %s all triggers?
-
Table triggers
-
Do you want to %s trigger %s?
-
Table trigger
-
Do you want to %s spatial index for field %s?
-
Spatial Index
-
Check
-
Primary key
-
Foreign key
-
Unique
- فريد
+
Exclusion
-
Unknown
-
DBModel
Databases
-
Invalid layer
-
Unable to load the layer %s
-
DBTree
Rename
-
Delete
- إلغاء
+
Add to canvas
-
Re-connect
-
@@ -1001,7 +999,7 @@ Query:
Create single-part geometries instead of multi-part
-
Store
-
Delete
- إلغاء
+
<html><head/><body><p>Avoid selecting feature by id. Sometimes - especially when running expensive queries/views - fetching the data sequentially instead of fetching features by id can be much quicker.</p></body></html>
-
Avoid selecting by feature id
-
@@ -1208,7 +1206,7 @@ columns
Merge selection with the neighbouring polygon with the largest
-
Linear (N*k x 3) distance matrix
-
Standard (N x T) distance matrix
-
Summary distance matrix (mean, std. dev., min, max)
-
Use only the nearest (k) target points
-
Unstratified Sampling Design (Entire layer)
-
Stratified Sampling Design (Individual polygons)
-
Initial inset from corner (LH side)
-
Keep all records (including non-matching target records)
-
Input subset field (unique ID field)
-
Update extents from canvas
-
Align extents and resolution to selected raster layer
-
Unable to compute extents aligned on selected raster layer
-
Please specify valid extent coordinates
@@ -2024,11 +2022,11 @@ columns
There were %d vertices in original dataset which
were reduced to %d vertices after simplification
-
Processing of the following layers/files ended with error:<br><br>
-
Join attributes by location
@@ -2089,9 +2087,9 @@ This may cause unexpected results.
حقل الأطوال
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
-
Split vector layer
@@ -2127,19 +2125,19 @@ This may cause unexpected results.
Can't delete file %s
-
Error loading output shapefile:
%s
-
Created output shapefile:
%s
Would you like to add the new layer to the TOC?
-
Please specify input vector layer
@@ -2152,7 +2150,7 @@ Would you like to add the new layer to the TOC?
Defined Projection For:
%s.shp
-
Random Points
@@ -2184,26 +2182,26 @@ Would you like to add the new layer to the TOC?
Selected features: %s
-
Commit error:
%s
-
Could not replace geometry of feature with id %s
-
Could not eliminate features with these ids:
%s
-
Created output shapefile:
%s
-
Line intersections
@@ -2220,7 +2218,7 @@ Would you like to add the new layer to the TOC?
Created output shapefiles in folder:
%s
-
Please specify input unique ID field
@@ -2232,7 +2230,7 @@ Would you like to add the new layer to the TOC?
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Distance matrix
@@ -2298,7 +2296,7 @@ Would you like to add the new layer to the TOC?
There are no shapefiles with the given geometry type. Please select an available geometry type.
-
Delete error
@@ -2366,7 +2364,7 @@ Are you sure you want to proceed?
Please specify an input layer
- الرجاء تحديد طبقة الإدخال
+
Simplify results
@@ -2389,47 +2387,24 @@ Are you sure you want to proceed?
حذف من الإختيار الحالى
- Select by location
الإختيار مكانياً
- Select features in:
تحديد الميزات في:
- that intersect features in:
تتقاطع تلك الميزات في:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- تعديل الإختار الحالى ب
+ تعديل الإختار الحالى ب
Use selected features only
- استخدم فقط الميزة المختارة
+ استخدم فقط الميزة المختارة
Please specify select layer
@@ -2460,11 +2435,11 @@ Are you sure you want to proceed?
DlgAddGeometryColumn
Sorry
- آسف
+
field name must not be empty
-
@@ -2472,32 +2447,32 @@ Are you sure you want to proceed?
Autofill settings
-
Autofill mode
-
Do not autofill
-
Fill with numbers
-
Fill with parameter values
-
Parameter to use
-
@@ -2505,7 +2480,7 @@ Are you sure you want to proceed?
Processing options
-
DlgCreateIndex
Error
- خطأ
+
Please enter some name for the index
-
DlgCreateTable
&Create
-
Sorry
- آسف
+
no field selected
-
field is at top already
-
No field selected
-
field is at bottom already
-
select schema!
-
enter table name!
-
add some fields!
-
set geometry column name
-
Good
-
everything went fine
-
DlgExportVector
Choose where to save the file
-
Shapefiles
-
Export to file
-
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
%s
-
Export finished.
-
DlgFieldProperties
Sorry
- آسف
+
field name must not be empty
-
field type must not be empty
-
@@ -2631,12 +2606,12 @@ Are you sure you want to proceed?
Get scripts and models
-
about:blank
- حول: فارغة
+
@@ -2674,36 +2649,36 @@ Are you sure you want to proceed?
DlgImportVector
Choose the file to import
-
Import to database
-
Input layer missing or not valid
-
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
%s
-
Import was successful.
-
@@ -2711,12 +2686,12 @@ Are you sure you want to proceed?
Processing modeler
-
Open model
-
...
- ...
+
Save
- احفظ
+
Save as...
-
Export as image
- التصدير كصورة
+
Edit model help
-
Run model
-
Multiple selection
-
@@ -2792,17 +2767,17 @@ Are you sure you want to proceed?
Enter number or expression
-
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -2810,17 +2785,17 @@ Are you sure you want to proceed?
Dialog
- حوار
+
Output
- المخرجات
+
Style
- نمط
+
@@ -2841,12 +2816,12 @@ Are you sure you want to proceed?
Script editor
-
Save
- احفظ
+
...
- ...
+
Save as...
-
Edit script help
-
Run algorithm
-
Cut
-
Copy
- نسخ
+
Paste
-
Undo
-
Redo
-
DlgSqlWindow
%d rows, %.1f seconds
-
Sorry
@@ -2923,43 +2898,43 @@ geometry column - column with unique integer values
DlgTableProperties
Sorry
- آسف
+
nothing selected
-
Are you sure
-
really delete column '%s'?
-
really delete constraint '%s'?
-
The selected table has no geometry
-
Create?
-
Create spatial index for field %s?
-
Nothing selected
-
really delete index '%s'?
-
@@ -3035,95 +3010,95 @@ geometry column - column with unique integer values
Field calculator
-
Create a new field
-
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
- دقة
+
Input layer
- إدخال طبقة
+
Update existing field
-
Output file
- ملف الإخراج
+
...
- ...
+
FieldsCalculatorDialog
[Save to temporary file]
-
Save file
-
Unable to execute algorithm
-
Wrong or missing parameter values
-
FileDirectorySelector
...
- ...
+
Select directory
-
Select file
-
All files (*.*)
-
@@ -3160,16 +3135,16 @@ geometry column - column with unique integer values
Unable to load {0} plugin.
The required "{1}" module is missing.
Install it and try again.
-
QGIS version detected:
-
This version of Gdal Tools requires at least QGIS version 1.0.0
Plugin will not be enabled.
-
Projections
@@ -3209,7 +3184,7 @@ Plugin will not be enabled.
Burns vector geometries into a raster
-
Polygonize (Raster to vector)
@@ -3217,7 +3192,7 @@ Plugin will not be enabled.
Produces a polygon feature layer from a raster
-
Translate (Convert format)
@@ -3349,11 +3324,11 @@ Plugin will not be enabled.
Tile index
-
Build a shapefile as a raster tileindex
-
GdalTools settings
@@ -3386,9 +3361,9 @@ Plugin will not be enabled.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
-
No input files to process.
-
The following files were not created:
{0}
-
@@ -3458,7 +3433,7 @@ Do you want terminate it anyway?
%s not created.
-
@@ -3503,7 +3478,7 @@ Do you want terminate it anyway?
Recurse subdirectories
-
Select the input directory with files to Warp
-
Select the output directory to save the results to
-
Output size or resolution required
-
The output file doesn't exist. You must set up the output size or resolution to create it.
-
Select the input file for Translate
@@ -3588,7 +3563,7 @@ Do you want terminate it anyway?
Select where to save the TileIndex output
-
Convert paletted image to RGB
@@ -3661,7 +3636,7 @@ Do you want terminate it anyway?
GDAL was unable to retrieve the extent from any file.
The "Use intersected extent" option will be unchecked.
-
Empty extent
@@ -3670,7 +3645,7 @@ The "Use intersected extent" option will be unchecked.
The computed extent is empty.
Disable the "Use intersected extent" option to have a nonempty output.
-
Select where to save the Merge output
@@ -3682,7 +3657,7 @@ Disable the "Use intersected extent" option to have a nonempty output.
{0} not created.
-
Select the files to analyse
@@ -3848,17 +3823,17 @@ and python executables.
MacOS users usually need to set it to something like
/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to python modules.
-
Useful to open local GDAL documentation instead of online help
when pressing on the tool dialog's Help button.
-
Select directory with GDAL executables
@@ -3903,7 +3878,7 @@ when pressing on the tool dialog's Help button.
Recurse subdirectories
-
Create an output alpha band
-
&Output file for contour lines (vector)
-
I&nterval between contour lines
-
If not provided, no elevation attribute is attached.
-
Use Zevenbergen&&Thorne formula (instead of the Horn's one)
-
Color relief
-
Scale (ratio of vert. units to horiz.)
-
Slope expressed as percent (instead of as degrees)
-
Return trigonometric angle (instead of azimuth)
-
Return 0 for flat (instead of -9999)
-
Layer stack
-
Use intersected extent
-
Grab pseudocolor table from the first image
-
Search for nearly &white (255) pixels instead of black ones
-
&Output file for polygons (shapefile)
-
&Fixed buf val
-
&Output file for rasterized vectors (raster)
-
Keep existing raster size and resolution
-
Raster size in pixels
-
Raster resolution in map units per pixel
-
Horizontal
- أفقي
+
Vertical
- عمودي
+
Raster tile index
-
Tile index field
-
Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
-
Assign a specified nodata value to output bands.
-
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
-
Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
-
Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
-
Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
-
Lanczos
-
Use m&ultithreaded warping implementation
-
&Output directory for contour lines (shapefile)
-
@@ -4899,7 +4874,7 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Voronoi polygon
-
Buffer region
@@ -4931,7 +4906,7 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Cancel
@@ -4962,17 +4937,17 @@ Please choose another field...
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Layer '{0}' updated
-
Error writing output shapefile.
@@ -5080,18 +5055,18 @@ Please choose another field...
No output created. File creation error:
%s
-
Created output shapefile:
%s
%s%s
-
Error loading output shapefile:
%s
-
@@ -5101,7 +5076,7 @@ Warnings:
Symmetrical difference
-
@@ -5158,7 +5133,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Overlay data on a 3D globe
- تراكب البيانات على الغلوب 3D
+
Creates a heatmap raster for the input point vector.
-
Creating heatmap
-
Abort
- إجهاض
+
Input point layer
- إدخال طبقة نقاط
+
Output raster
-
Output format
- تنسيق الإخراج
+
Rows
- الصفوف
+
Cell size X
-
Columns
- الأعمدة
+
Cell size Y
-
Use radius from field
-
Use weight from field
-
0.0
- 0.0
+
Decay ratio
-
Quartic (biweight)
-
Triangular
-
Uniform
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
Confirmation
-
Are you sure you want to clear log?
-
Create test
@@ -5443,24 +5418,24 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Dialog
- حوار
+
Reload
-
Save
- احفظ
+
InfoViewer
DB Manager
-
@@ -5484,7 +5459,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&تحرير
@@ -5504,1117 +5479,1109 @@ GEOS geoprocessing error: One or more input features have invalid geometry.إختيار
- Measure
قياس
- &Decorations
&الإتجاهات
- &Layer
&طبقة
- New
جديد
- &Plugins
&الإضافات
- &Help
&مساعدة
- &Settings
&اعدادات
- &Raster
&طبقة شبكية
- Vect&or
مُتجه
- &OpenStreetMap
ضشارع خريطة مفتوح
- File
ملف
- Manage Layers
ادارة الطبقات
- Digitizing
الترقيم
- Advanced Digitizing
ترقيم متقدم
- Map Navigation
ملاحة فى الخريطة
- Attributes
الخواص
- Plugins
إضافات
- Help
مساعدة
- Raster
طبقة شبكية
- Label
رمز
- Vector
طبقة خطية
- Database
قواعد بيانات
- Web
ويب
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
حفظ كصوره...
- &New Print Composer
تكوين لطباعة جديدة
- Ctrl+P
Ctrl+P
- Composer Manager...
إدارة مكون الخريطة
P&roject
-
&Open Recent
-
New From Template
-
- Preview Mode
-
- Paste Features as
-
- &New
-
- &Open...
-
- &Save
-
- Save &As...
-
- Exit QGIS
-
- Ctrl+Q
Ctrl+Q
- &Undo
تراجع
- Ctrl+Z
Ctrl+Z
- &Redo
تكرار
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
قطع الميزات
- Ctrl+X
Ctrl+X
- Copy Features
نسخ الميزات
- Ctrl+C
Ctrl+C
- Paste Features
لصق الميزات
- Ctrl+V
Ctrl+V
- Add Feature
أضف ميزة
- Ctrl+.
Ctrl+.
- Move Feature(s)
تحريك الميزات
- Reshape Features
إعادة تشكيل الميزات
- Split Features
تقسيم الميزات
- Split Parts
-
- Delete Selected
حذف الإختيار
- Add Ring
أضفْ حلقةً
- Add Part
إضافة جزء
- Simplify Feature
تبسيط ميزة
- Delete Ring
حذف الحلقة
- Delete Part
حذف جزء
- Merge Selected Features
أدمج الميزات المختارة
- Merge Attributes of Selected Features
دمج البيانات الوصفية للميزات المختارة
- Node Tool
أداة العقدة
- Rotate Point Symbols
تدوير رموز نقطة
- Snapping Options...
-
- Pan Map
عموم الخريطة
- Zoom In
تكبير
- Ctrl++
Ctrl++
- Zoom Out
تصغير
- Ctrl+-
Ctrl+-
+ Select Single Feature
- إختيار ميزة منفردة
+ إختيار ميزة منفردة
+ Select Features by Rectangle
- إختيار ميزات بواسطة مستطيل
+ إختيار ميزات بواسطة مستطيل
- Select Features by Polygon
إختيار ميزات بواسطة شكل
- Select Features by Freehand
إختيار ميزات بواسطة اليد
- Select Features by Radius
إختيار ميزات بواسطة نصف القطر
- Deselect Features from All Layers
إلغاء الإختيار من كل الطبقات
- Identify Features
تعريف الميزات
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
قياس خط
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
قياس مساحة
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
قياس الزاوية
- Zoom Full
التكبير الكامل
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
تكبير للطبقة
- Zoom to Selection
تكبير الإختيار
- Ctrl+J
Ctrl+J
- Zoom Last
تكبير الأخير
- Zoom Next
تكبير التالى
- Zoom Actual Size
تكبير الى الحجم الحقيقى
- Zoom to Native Pixel Resolution
تكبير الى حجم الخلية الأصلى
- Map Tips
يشذب خريطةِ
- Show information about a feature when the mouse is hovered over it
اعرض المعلومات الميزة التى تحوم حولها الفأرة
- New Bookmark...
قائمة العناوين الجديدة...
- Ctrl+B
Ctrl+B
- Show Bookmarks
عرض قائمة العناوين
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
أنعشْ
- Text Annotation
شرح النص
- Form Annotation
شرح الشكل
- Move Annotation
شرح النقل
- Labeling
ترميز
- Layer Labeling Options
خيارات ترميز الطبقة
- New Shapefile Layer...
طبقة شيب فايل جديدة
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
إضافة طبقة SpatiaLite ...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
حاسب الطبقات الشبكية
- Add Vector Layer...
إضافة طبقة خطية
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
إضافة طبقة شبكية
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
إضافة طبقات PostGIS ...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
إضافة طبقة SpatiaLite ...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
إضافة طبقة MSSQL مكانية ...
- Add Oracle Spatial Layer...
إضافة طبقة أوراكل مكانية ...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
-
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
فتح جدول البيانات الوصفية
- Toggle Editing
-
- Toggles the editing state of the current layer
-
- Save for Selected Layer(s)
تسجيل الطبقة المختارة (ج)
- Save edits to current layer, but continue editing
حفظ التعديلات على الطبقة الحالية، ولكن استمر في التحرير
- Save As...
حفظ بإسم
- Add from Layer Definition File...
-
- Save As Layer Definition File...
-
- Normal
-
- Normal preview mode
-
- Simulate Photocopy (Grayscale)
-
- Simulate photocopy (grayscale)
-
- Simulate Fax (Mono)
-
- Simulate fax (mono)
-
- Simulate Color Blindness (Protanope)
-
- Simulate color blindness (protanope)
-
- Simulate Color Blindness (Deuteranope)
-
- Simulate color blindness (deuteranope)
-
- Set Scale Visibility of Layer(s)
-
- Remove Layer(s)
إزالة طبقة
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
تحيين CRS الطبقة (ج)
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
تحيين المشروع CRS من طبقة
- Properties...
خصائص
- Query...
التساؤل
- Add to Overview
أضف الى النظرة العامة
- Add All to Overview
إضافة الكل للنظرة العامة
- Remove All from Overview
إزالة جميع من اللمحة العامة
- Show All Layers
إظهار كُلّ الطبقات
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
إخفاء كُلّ الطبقات
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
-
- Open Field Calculator
-
- Add Delimited Text Layer...
-
- Add Delimited Text Layer
-
- New Vector Layer
-
- Paste features in clipboard into a new OGR vector layer.
-
- New Memory Vector Layer
-
- Paste features in clipboard into a new memory vector layer.
-
- Toggle Full Screen Mode
تبديل إلى وضع ملء الشاشة
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
- F5
+
- Ctrl+F
Ctrl+F
- F11
- F11
+
- Project Properties...
خصائص المشروعِ...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
خيارات...
- Custom CRS...
CRS معدل ...
- Configure shortcuts...
تكوين اختصارات ...
- Local Histogram Stretch
تمديد الرسم البياني المحلي
- Stretch histogram of active raster to view extents
-
- Help Contents
محتويات المساعدةِ
- F1
F1
- API documentation
API المستندات
- QGIS Home Page
QGIS الصفحة الرئيسية لبرنامج
- Ctrl+H
Ctrl+H
- Check QGIS Version
QGIS تحقق من نسخة برنامج
- Check if your QGIS version is up to date (requires internet access)
تحقق من نسخة البرنامج اذا كانت حديثة
- About
حول
- QGIS Sponsors
QGIS الداعمون ل
- Move Label
تحريك رمز
- Rotate Label
تدوير رمز
- Rotate Label
Ctl (Cmd) increments by 15 deg.
-
- Change Label
تغيير رمز
- Style Manager...
مدير الأنماط
- Python Console
بايثون
- Full histogram stretch
-
- Stretch Histogram to Full Dataset
-
- Customization...
تخصيص...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
-
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
تضمين الطبقات والمجموعات ...
- Embed layers and groups from other project files
تضمين الطبقات والمجموعات من ملفات مشاريع أخرى
- &Copyright Label
&حقوق التأليف والنشر للتسمية
- Creates a copyright label that is displayed on the map canvas.
صنع حقوق الطبع والنشر للتسمية التي يتم عرضها على لوحة الخريطة.
- &North Arrow
&سهم شمالي
- "Creates a north arrow that is displayed on the map canvas"
"صنع سهم شمالي يتم عرضه على لوحة الخريطة"
- &Scale Bar
& شريط القياس
- Creates a scale bar that is displayed on the map canvas
صنع شريط قياس يتم عرضه على لوحة الخريطة
- Add WFS Layer...
إضافة طبقة WFS ...
- Add WFS Layer
إضافة طبقة WFS
- Feature Action
ميزة الإجراء
- Run Feature Action
تشغيل ميزة الإجراء
- Pan Map to Selection
اختيار عموم خريطة
- Touch zoom and pan
-
- Offset Curve
تعويض المنحنى
- Copy style
نسخ نمط
- Paste style
لصق نمط
- Add WCS Layer...
إضافة طبقة WFS
- &Grid
&طبقة شبكية
- Grid
طبقة شبكية
- Pin/Unpin Labels
تثبيت / إزالة تثبيت التسميات
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6625,175 +6592,175 @@ Acts on all editable layers
نفس الفعل على جميع الطبقات القابلة للتحرير
- Highlight Pinned Labels
تسليط الضوء على التسميات المثبتة
- New Blank Project
مشروع جديد فارغ
- Local Cumulative Cut Stretch
-
- Local cumulative cut stretch using current extent, default limits and estimated values.
-
- Full Dataset Cumulative Cut Stretch
-
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
-
- Show/Hide Labels
إظهار/إخفاء الرموز
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
Acts on currently active editable layer
-
- Html Annotation
شرح HTML
- Duplicate Layer(s)
طبقات مكررة (ج)
- SVG annotation
شرح SVG
- Save for All Layers
حفض كُلّ الطبقات
- Rollback for All Layers
العودة إلى كل الطبقات
- Cancel for All Layers
الإلغاء لجميع الطبقات
- Rollback for Selected Layer(s)
العودة إلى الطبقات المختارة (ج)
- Current Edits
التحريرات الحالية
- Cancel for Selected Layer(s)
إلغاء تسجيل الطبقات المختارة (ج)
- Save Layer Edits
حفظ تحوير الطبقات
- Rotate Feature(s)
تدوير الميزات (ج)
- &Download data
&تحميل البيانات
- &Import topology from XML
استيراد طوبولوجيا من XML
- &Export topology to SpatiaLite
&تصدير الطوبولوجيا إلى SpatiaLite
- Increase brightness
زيادة السطوع
- Decrease brightness
تقليل السطوع
- Increase contrast
زيادة التباين
- Decrease contrast
تقليل التباين
- Select By Expression
-
- Select features using an expression
-
- Need commercial support?
-
- DXF Export...
-
- Fill Ring
-
@@ -6801,76 +6768,76 @@ Acts on currently active editable layer
Manage connections
-
Save to file
-
Browse
- استعرض
+
Load from file
-
Load
-
Save
- احفظ
+
eXtensible Markup Language (*.xml *.XML)
-
Save connections
-
Load connections
-
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
-
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -6878,307 +6845,307 @@ Acts on currently active editable layer
MetaSearch
-
Search
-
Find
-
Set global
-
Map extent
-
-180
-
90
- 90
+
Records
-
-90
-
180
- 180
+
From
-
Keywords
-
Results
- النتائج
+
>
-
<<
-
Add WCS
-
Add WMS/WMTS
-
<
-
Add WFS
-
Abstract
-
Double click to see full record information
-
Type
- نوع
+
Title
- عنوان
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
- جديد
+
Edit
- تعديل
+
Delete
- إلغاء
+
Save
- احفظ
+
Add default services
-
Load
-
Settings
- إعدادات
+
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
-
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
@@ -7189,23 +7156,23 @@ Acts on currently active editable layer
Message
-
There are unsaved changes in model. Close modeler without saving?
-
Empty model
-
Save Model As Image
-
PNG files (*.png *.PNG)
-
Warning
@@ -7221,33 +7188,28 @@ Acts on currently active editable layer
Processing models (*.model)
-
I/O error
-
Unable to save edits. Reason:
%s
-
Can't save model
-
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
@@ -7265,6 +7227,11 @@ See the log for more information.
Could not open model
لا يمكن فتح النموذج
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
المعايير
@@ -7274,15 +7241,15 @@ See the log for more information.
MultipleInputDialog
Select all
- إختيار الكل
+
Clear selection
-
Toggle selection
-
@@ -7290,107 +7257,107 @@ See the log for more information.
Create a new Catalogue connection
-
Name
-
URL
- الرابط
+
Save connection
-
Both Name and URL must be provided
-
Overwrite %s?
-
NotSupportedDbType
%s is not supported yet
-
NumberInputDialog
[Enter your formula here]
-
Values from data layers extents
-
Min X
-
Max X
-
Min Y
-
Max Y
-
Cellsize
-
Values from raster layers statistics
-
Mean
- المتوسط
+
Std. deviation
-
Max value
-
Min value
-
Values from QGIS map canvas
-
Current extent
-
Full extent of all layers in map canvas
-
Wrong expression
-
The expression entered is not correct
-
@@ -7435,53 +7402,53 @@ See the log for more information.
OutputSelectionPanel
[Save to temporary file]
-
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
-
Select directory
-
PGDatabase
&Table
-
Run &Vacuum Analyze
-
Sorry
- آسف
+
Select a TABLE for vacuum analyze.
-
PGTable
Table rule
-
@@ -7495,49 +7462,49 @@ See the log for more information.
PostGisDBPlugin
There is no defined database connection "%s".
-
PrepareAPIDialog
Error
- خطأ
+
Done
-
Processing
Processing
-
Toolbox
-
Graphical modeler
-
History and log
- التاريخ والسجل
+
Options and configuration
-
&Results viewer
-
&Commander
-
@@ -7545,39 +7512,39 @@ See the log for more information.
Processing Toolbox
-
Enter algorithm name to filter list
- إدخال اسم الخوارزمية لتصفية القائمة
+
Search...
- بحث ...
+
Execute
-
Execute as batch process
-
Edit rendering styles for outputs
-
Recently used algorithms
-
Python
Python warning
-
An error has occured while executing Python code:
@@ -7601,23 +7568,23 @@ See the log for more information.
Couldn't load plugin '%s' from ['%s']
-
Couldn't load plugin %s
-
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
-
Error while unloading plugin %s
-
@@ -7632,83 +7599,83 @@ See the log for more information.
Compile APIs
-
Saving prepared file...
-
Saved
-
Done
-
Error preparing file...
-
Hide Editor
-
Check Syntax
-
Run selected
-
Run Script
-
Undo
-
Redo
-
Find Text
-
Cut
-
Copy
- نسخ
+
Paste
-
Comment
- التعليق
+
Uncomment
-
Share on codepad
-
Hide/Show Object Inspector
-
Select All
-
Settings
@@ -7716,149 +7683,149 @@ See the log for more information.
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
-
Connection error:
-
[Temporary file saved in {0}]
-
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
-
You have to save the file before running it.
-
Python Console: Save file
-
Script was correctly saved.
-
Click on button to restore all tabs from last session.
-
Restore tabs
-
Close
- إغلاق
+
List all tabs
-
New Editor
-
Close Tab
-
Close All
-
Close Others
-
Save As
-
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
-
The file <b>'{0}'</b> has been modified, save changes?
-
Unable to restore the file:
{0}
-
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
-
Show Editor
-
Enter Selected
-
Object Inspector
-
Open file
- فتح ملف
+
Save
- احفظ
+
Save As...
- حفظ بإسم
+
Run script
-
Show editor
-
Import Class
@@ -7866,103 +7833,103 @@ See the log for more information.
Import Processing class
-
Enter text to find...
-
Find Next
-
Find Previous
-
Case Sensitive
-
Whole Word
-
Wrap Around
-
Open File
-
Save Error
-
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
-
History saved successfully.
-
Session and file history cleared successfully.
-
History cleared successfully.
-
Command History
-
Show
-
Clear File
-
Clear Session
-
Python Console - Command History
-
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
@@ -8009,7 +7976,7 @@ See the log for more information.
nautical miles
-
@@ -8048,12 +8015,12 @@ See the log for more information.
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to alloc statement
-
تقدير المشتقات العادية ...
- minidump written to %1
-
- writing of minidump to %1 failed (%2)
-
- creation of minidump to %1 failed (%2)
-
- Crash dumped
-
Selection extends beyond layer's coordinate system.
-
Plugin "%1" is not compatible with this version of QGIS.
It will be disabled.
-
Generated CRS
A CRS automatically generated from layer info get this prefix for description
CRS منشأة
@@ -8384,12 +8352,12 @@ Error(%2): %3
sq. NM
-
NM
-
لا يمكن تحويل '٪ 1' إلى فاصل
- Cannot convert '%1' to boolean
لا يمكن تحويل '٪ 1' إلى قيمة منطقية
- Domain max must be greater than domain min
-
- Exponent must be greater than 0
-
- Invalid regular expression '%1': %2
تعبير عادي غير صالح '٪ 1':٪ 2
- Index is out of range
مؤشر خارج النطاق
- Cannot convert '%1:%2:%3' to color
-
- Cannot convert '%1:%2:%3:%4' to color
-
- "%1" is not a valid color ramp
-
- Cannot convert '%1:%2:%3:%4:%5' to color
-
- function help for %1 missing
-
- Operators
-
- Fields and Values
-
- Math
رياضيات
- Conversions
التحويلات
- Conditionals
الشرطية
@@ -8528,97 +8496,97 @@ Error(%2): %3
second|seconds
list of words separated by | which reference years
-
minute|minutes
list of words separated by | which reference minutes
-
hour|hours
list of words separated by | which reference minutes hours
-
day|days
list of words separated by | which reference days
-
week|weeks
wordlist separated by | which reference weeks
-
month|months
list of words separated by | which reference months
-
year|years
list of words separated by | which reference years
-
- Date and Time
التاريخ والوقت
- String
سلسلة أحرف
- Color
-
- Geometry
هندسة
- Record
سجل
- No root node! Parsing failed?
لا توجد عقدة جذر! فشل التحليل؟
- (no root)
(لا يوجد الجذر)
- Unary minus only for numeric values.
الأحادية ناقصة فقط لقيم رقمية.
- Can't preform /, *, or % on DateTime and Interval
لا يمكن التشكيل /، *، أو٪ في التاريخ والوقت والفاصل
- [unsupported type;%1; value:%2]
[نوع غير معتمد؛٪ 1؛ القيمة:٪ 2]
- Column '%1' not found
العمود '٪ 1' غير موجود
@@ -8685,7 +8653,7 @@ Error(%2): %3
segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
-
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
-
+
polygon %1 has no rings
-
OGR driver for '%1' not found (OGR error: %2)
-
no available replacement for internal fieldname ogc_fid found
-
Reserved attribute name ogc_fid replaced with %1
-
By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
DBF file
-
FMEObjects Gateway
-
New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
Limit the number of coordinate pairs per line in multiline format.
-
Set the number of decimal for coordinates. Default value is 10.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
Set to YES to resize fields to their optimal size.
-
DBF File
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
If not specified, GML2 will be used.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
Cannot overwrite a OGR layer in place
-
Provider %1 has no %2 method
-
Loaded from Provider
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Singleband pseudocolor
-
Singleband color data
-
Inverted polygons
-
Gradient fill
-
Shapeburst fill
-
Version 0.1
@@ -9836,6 +9798,7 @@ Only %1 of %2 features written.
Layers
طبقات
@@ -9857,7 +9820,7 @@ Only %1 of %2 features written.
An event visualization tool - view images associated with vector features
-
Georeferencer GDAL
-
Georeferencing rasters using GDAL
-
Could not reproject view extent: %1
-
Could not reproject layer extent: %1
-
Fit to a Helmert transform requires at least 2 points.
-
Fit to an affine transform requires at least 4 points.
-
Fitting a projective transform requires at least 4 corresponding points.
-
Creates a Heatmap raster for the input point vector
-
A plugin for raster based terrain analysis
-
A plugin that makes spatial queries on vector layers
-
Shapefile to PostgreSQL/PostGIS Import Tool
-
+
+ SQL Anywhere plugin
+
+
+ Store vector layers within a SQL Anywhere database
+
A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
-
This raster file has no bands and is invalid as a raster layer.
-
Nearest Neighbour
-
Average
- متوسط
+
Gauss
-
Cubic
- مُكعب
+
Mode
-
None
- لا شيء
+
GPS eXchange format provider
-
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
لم يستطع QGIS العثور على برمجيات الخاص بك تركيب GRASS
هل ترغب في تحديد المسار (GISBASE) لتثبيت GRASS الخاص بك؟
@@ -10529,7 +10502,7 @@ Would you like to specify path (GISBASE) to your GRASS installation?
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
OpenFileGDB
-
GeoPackage
-
Informix DataBlade
-
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
field %1 with unsupported type %2 skipped
-
تعذر إنشاء الملف % 1 .qpj
- Fetching features failed.
SQL:%1
Error: %2
@@ -10860,7 +10833,7 @@ SQL:%1
خطأ : %2
- Oracle
أوراكل
@@ -10878,19 +10851,19 @@ SQL:%1
Connection to database failed
-
No owner name found
-
Creation of data source %1 failed:
%2
-
Field name clash found (%1 not remappable)
-
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Infinite filter rectangle specified
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
Save style in database
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
The extra plugin path '%1' does not exist !
-
Couldn't set SIP API versions.
-
Undefined
-
Hidden
-
Title
- عنوان
+
Group
- مجموعة
+
Subgroup
-
Symbol
- رمز
+
Symbol label
-
Topology Checker
-
A Plugin for finding topological errors in vector layers
-
Using fix %1.
-
Topology plugin
-
intersecting geometries
-
features too close
-
point not covered by segment
-
segment too short
-
invalid geometry
-
dangling end
-
duplicate geometry
-
pseudo node
-
overlaps
-
gaps
-
point not covered
-
line ends not covered by point
-
point not in polygon
-
polygon does not contain point
-
multipart feature
-
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Save style to DB (%1)
-
Could not save symbology because:
%1
-
Attribute index %1 out of bounds [0;%2]
-
Error
- خطأ
+
Layer
- طبقة
+
Feature ID
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
-
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- الأجندة
+
QSpatiaLiteDriver
- Error opening database
خطأ في فتح قاعدة البيانات
- Error closing database
خطأ في غلق قاعدة البيانات
- Unable to begin transaction
غير قادر على بدء المعاملة
- Unable to commit transaction
غير قادر على تأكيد المعاملة
- Unable to rollback transaction
غير قادر على التراجع عن المعاملة
@@ -11515,29 +11493,29 @@ Response was:
لا يوجد تساؤل
- Unable to execute statement
غير قادر على تنفيذ البيان
- Unable to execute multiple statements at a time
غير قادر على تنفيذ بيانات متعددة في وقت واحد
- Unable to reset statement
غير قادر على إعادة تعيين البيان
- Unable to bind parameters
غير قادر على ربط المعلمات
- Parameter count mismatch
-
@@ -11575,47 +11553,47 @@ Response was:
The port detected a break condition
-
The port detected a framing error (usually caused by incorrect baud rate settings)
-
There was an I/O error while communicating with the port
-
Character buffer overrun
-
Receive buffer overflow
-
The port detected a parity error in the received data
-
Transmit buffer overflow
-
General read operation failure
-
General write operation failure
-
Multiple Instances of QgisApp
-
Map canvas. This is where raster and vector layers are displayed when added to the map
-
QGIS !الجاهز!
- Minimize
تصغير
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
-
- Zoom
تكبير
- Toggles between a predefined size and the window size set by the user
-
- Bring All to Front
-
- Bring forward all open windows
-
- Current Edits
التحريرات الحالية
- Error
خطأ
- Failed to open Python console:
-
QGIS
-
Multiple instances of QGIS application object detected.
Please contact the developers.
-
QGIS - %1 ('%2')
-
- Panels
الواح
- Toolbars
مزلاق الادواة
- Window
نافذة
- &Database
&قاعدة بيانات
- &Web
&ويب
- Progress bar that displays the status of rendering layers and other time-intensive operations
مزلاج تقدّمِ التي تَضِعُ منزلةَ إعادة طبقاتِ وعملياتِ مركّزةِ مرّاتِ أخرى
- Toggle extents and mouse position display
-
- Coordinate:
احداثيات:
- Current map coordinate
-
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
-
- Current map coordinate (lat,lon or east,north)
-
- Scale
مقياس
- Current map scale
مِقياس الخريطةِ الحاليِ
- Displays the current map scale
يَعْرضُ مِقياسُ الخريطةِ الحاليِ
- Current map scale (formatted as x:y)
مِقياس الخريطةِ الحاليِ (هَيّأَ كx: y)
- Render
أعدْ
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
عند التأكد تكون طبقات الخارطة مستعدة للاستجابة لأوامر الملاحة في الخارطة وبقية الاوامر
- Toggle map rendering
إعادة خريطةِ المسمارِ
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
-
- CRS status - Click to open coordinate reference system dialog
-
- Ready
الجاهز
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
جنفاص نظرة خريطةِ العامّةِ. هذا الجنفاصِ يمكن أن يُستَعملَ لعَرْض خريطةِ مستقرة التى تعرض المدى الحاليَ لجنفاصِ الخريطةَ . إنّ التيارَ موجودَيظهر كمستطيل أحمر. أيّ طبقة على الخريطةِ يُمْكِنُها إضافتها الى النظرة العامّة
- Overview
صورة كامل
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
قائمة تفسير مصطلحات الخريطةِ التي تَعْرضُ كُلّ الطبقات حالياً على جنفاصِ الخريطةِ. النقرة على صندوقِ المراقبةَ لإدَارَة طبقة على لتشغيل أَو الايقاف. النقرة نقرة مضاعفة على طبقة في قائمة التفسير للطلب ظهورها ووَضعتْ ملكياتَ أخرى
- Layers
طبقات
- Map layer list that displays all layers in drawing order.
-
- Layer order
ترتيب الطبقة
Private qgis.db
-
- < Blank >
< Blank >
- QGIS version
نسخة QGIS:
- QGIS code revision
نسخة QGIS:
-
- Compiled against Qt
-
-
- Running against Qt
-
-
- Compiled against GDAL/OGR
-
Compiled against Qt
+
+
+ Running against Qt
+
+
+ Compiled against GDAL/OGR
+
+
+ Running against GDAL/OGR
-
- PostgreSQL Client Version
-
- No support.
لا يدعم
- SpatiaLite Version
نسخة SpatiaLite
- QWT Version
نسخة QWT:
- PROJ.4 Version
نسخة PROJ.4
- QScintilla2 Version
نسخة QScintilla2
- This copy of QGIS writes debugging output.
-
- %1 doesn't have any layers
-
- Invalid Data Source
مصدر البياناتِ الباطلِ
- %1 is not a valid or recognized data source
-
- Vector
طبقة خطية
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
-
- %1 is an invalid layer - not loaded
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
- QGIS files
-
- No legend entries selected
-
- Select the layers and groups you want to remove in the legend.
-
- Remove layers and groups
-
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
- Do you want to save the current project? %1
-
- Invalid Layer
الطبقة الصحيحة
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
-
- Delimited Text
-
- Cannot get Delimited Text select dialog from provider.
-
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
-
- Oracle
أوراكل
- Cannot get Oracle select dialog from provider.
-
- WMS
WMS
- Cannot get WMS select dialog from provider.
- لا يمكن الحصول على WMS الحوار المختار من الموفر.
+
- WCS
WCS
- Cannot get WCS select dialog from provider.
-
- WFS
WFS
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
-
- Auto-open Project
-
- Failed to open: %1
-
- Not valid project file: %1
-
- Project failed to open: %1
-
- Default template has been reopened: %1
-
- File not found: %1
-
- Calculating...
حساب...
- Abort...
إجهاض...
- Choose a QGIS project file to open
إخترْ ملف مشروعِ برنامج نظم المعلومات الجغرافية للفَتْح
- Loading project: %1
-
- Unable to open project
غير قادر على فَتْح المشروعِ
- Security warning
-
- project macros have been disabled.
-
- Enable macros
-
- Project loaded
-
- Choose a QGIS project file
إخترْ ملف مشروعِ نظم المعلومات الجغرافية
- Saved project to: %1
-
- Unable to save project %1
-
- Choose a file name to save the QGIS project file as
-
- Unable to load %1
-
- Choose a file name to save the map image as
- اختيار اسم ملف لحفظ صورة الخريطة كما
+
- Saved map image to %1
-
- Default system font substituted.
-
- Labeling
- ترميز
+
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
-
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
-
Range
- النطاق
+
Unique Values
-
File Name
-
Value Map
-
Enumeration
-
Hidden
-
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
-
Web View
-
Color
-
Relation Reference
-
Date/Time
-
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
-
- The project file is not writable.
-
- DXF export completed
-
- DXF export failed
-
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
-
- Show more
-
- Labeling Options
-
- Please select a vector layer first
-
- Layer labeling settings
-
- Reading raster
-
- Cannot write raster error code: %1
-
- Saving done
-
-
- Export to vector file has been completed
-
Save error
- حفظ الخطأ
+ Export to vector file has been completed
+
- Save error
+
+
+ Export to vector file failed.
Error: %1
-
- No Layer Selected
لا طبقةَ إختارتْ
- To delete features, you must select a vector layer in the legend
لحَذْف المعالم، يَجِبُ أَنْ تَختارَ طبقة موجهِ في قائمة المصطلحات
- No Vector Layer Selected
لا طبقةَ موجهِ إختارتْ
- Deleting features only works on vector layers
حَذْف المعالم التى يَعْملُ فقط على طبقاتِ الموجهِ
- Provider does not support deletion
المجهز لا يَدْعمُ حذفَ
- Data provider does not support deleting features
جرعة مجهزِ بياناتِ لا تَدْعمَ حَذْف الميزّاتِ
- Layer not editable
الطبقة لَيستْ قابل للتحرير
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
الطبقة الحالية غير قابلة للتحرير. إخترْ "بداية تُحرّرُ" في أداةِ مزلاق تَحويل إلى أرقام.
-
- No Features Selected
-
-
- The current layer has not selected features
-
No Features Selected
+
+
+ The current layer has not selected features
+
+
+ Delete features
-
- Delete %n feature(s)?
number of features to delete
-
-
+
- Features deleted
-
- Problem deleting features
المشكلة التي تُحرّرُ الميزّاتَ
- A problem occured during deletion of features
أي مشكلة حَدثتْ أثناء حذفِ الميزّاتِ
- %n feature(s) deleted.
number of features deleted
-
-
+
- Merging features...
-
- Abort
إجهاض
- Create unique print composer title
-
- (title generated if left empty)
-
- Composer title
-
- Title can not be empty!
-
- Title already exists!
-
- Composer %1
-
- copy
نسخ
- No active layer
الطبقة مقفلة.
- No active layer found. Please select a layer in the layer list
-
-
- Active layer is not vector
-
-
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
-
Active layer is not vector
+
+
+ The merge features tool only works on vector layers. Please select a vector layer from the layer list
+
+
+ Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
-
- Not enough features selected
-
- The merge tool requires at least two selected features
-
- Merged feature attributes
-
- Merge failed
-
- An error occured during the merge operation
-
- Union operation canceled
-
-
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
-
+ The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
+
+
+ Merged features
-
- No active vector layer
- الطبقة النشطة مقفلة.
+
- To select features, choose a vector layer in the legend
- لتحديد الملامح، اختيار طبقة إتجاه في الليجندة
+
- Features cut
-
- Features pasted
-
- Paste features
-
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
-
- New memory layer name
-
- Layer name
-
- No features in clipboard.
-
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
-
- Cannot create field %1 (%2,%3)
-
- Cannot copy style: %1
-
- Cannot parse style: %1:%2:%3
-
- Cannot read style: %1
-
- Start editing failed
-
- Provider cannot be opened for editing
-
- Stop editing
ايقاف التحرير
- Do you want to save the changes to layer %1?
-
- Problems during roll back
-
- Could not %1 changes to layer %2
Errors: %3
-
- rollback
-
- cancel
-
- Save
احفظ
- all
-
- Rollback
-
- Cancel
- إالغاء
+
- Current edits
-
- %1 current changes for %2 layer(s)?
-
- copy
-
- Plugin layer
-
- Memory layer
-
- Duplicate layer:
-
- %1 (duplication resulted in invalid layer)
-
- Set scale visibility for selected layers
-
-
- Couldn't load Python support library: %1
-
Couldn't load Python support library: %1
+
+
+ Couldn't resolve python support library's instance() symbol.
-
- Python support ENABLED :-)
-
- There is a new version of QGIS available
هناك نسخة جديدة لبرنامج نظم المعلومات الجغرافية متوفرة
- You are running a development version of QGIS
أنت تشغل نسخة متطورة من نظم المعلومات الجغرافية
- You are running the current version of QGIS
-
- Would you like more information?
-
- QGIS Version Information
-
- QGIS - Changes since last release
-
- Unable to get current version information from server
-
-
- Connection refused - server may be down
-
-
- QGIS server was not found
-
-
- Unknown network socket error: %1
-
Connection refused - server may be down
+
+
+ QGIS server was not found
+
+
+ Unknown network socket error: %1
+
+
+ Unable to communicate with QGIS Version server
%1
-
- To perform a full histogram stretch, you need to have a raster layer selected.
-
- To change brightness or contrast, you need to have a raster layer selected.
-
- en
documentation language
-
- Layer is not valid
-
- The layer %1 is not a valid layer and can not be added to the map
-
- The layer is not a valid layer and can not be added to the map
-
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
- Save?
احفظ؟
- Current CRS: %1 (OTFR enabled)
-
- Current CRS: %1 (OTFR disabled)
-
- Map coordinates for the current view extents
-
- Map coordinates at mouse cursor position
احداثيات الخريطةِ في موقعِ مؤشّرةِ الفأرِ
- Extents:
-
- Maptips require an active layer
-
- %n feature(s) selected on layer %1.
number of selected features
-
-
+
- Open a GDAL Supported Raster Data Source
-
- Error adding valid layer to map canvas
-
- Raster layer
-
- %1 is not a supported raster data source
-
- Unsupported Data Source
-
- Exit QGIS
-
- Do you really want to quit QGIS?
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
-
- <tt>Settings:Options:General</tt>
Menu path to setting options
-
- Warn me when opening a project file saved with an older version of QGIS
-
- Project file is older
ملف المشروع أقدم
- This project file was saved by an older version of QGIS
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
-
- Warning
-
- This layer doesn't have a properties dialog.
-
- Authentication required
-
- Proxy authentication required
-
- SSL errors occured accessing URL %1:
-
-
Always ignore these errors?
-
- %n SSL errors occured
number of errors
-
-
+
@@ -13248,7 +13184,7 @@ Always ignore these errors?
Attributes changed
-
@@ -13256,111 +13192,111 @@ Always ignore these errors?
About
- حول
+
About QGIS
-
License
- ترخيص
+
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
-
QGIS is licensed under the GNU General Public License
-
http://www.gnu.org/licenses
-
QGIS Home Page
- QGIS الصفحة الرئيسية لبرنامج
+
Join our user mailing list
-
about:blank
- حول: فارغة
+
What's New
-
Providers
-
Developers
-
Essen (Germany), Developer meeting 2012
-
Contributors
-
Translators
-
Donors
-
<p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
-
Available QGIS Data Provider Plugins
-
Available Qt Database Plugins
-
Available Qt Image Plugins
-
Qt Image Plugin Search Paths <br>
-
@@ -13373,7 +13309,7 @@ p, li { white-space: pre-wrap; }
Invalid field name. This field name is reserved and cannot be used.
-
@@ -13435,7 +13371,7 @@ p, li { white-space: pre-wrap; }
Create attribute index on join field
-
Frame width
-
&Expand All
-
&Collapse All
-
&Remove
- &حذف
+
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Duplicate
- &تكرار
+
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As...
- حفظ بإسم
+
Save As Layer Definition File...
-
&Filter...
-
&Properties
-
Copy Style
-
Paste Style
-
QgsApplication
- Exception
-
- unknown exception
استثناء غير معروف
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13643,10 +13579,10 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
@@ -13654,55 +13590,55 @@ User DB Path: %9
⇥⇥
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
-
- Migration of private qgis.db failed.
%1
-
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
- مكوُن
+
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
@@ -13711,15 +13647,15 @@ User DB Path: %9
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Atlas preview
-
No matching atlas features found!
-
Expression based filter
-
@@ -13762,7 +13698,7 @@ Parser error:
Coverage layer
-
To create an attribute action, you must provide both a name and the action to perform.
-
Clicked coordinates (Run feature actions tool)
-
Action list
-
This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
-
Captures any output from the action
-
Captures the standard output or error generated by the action and displays it in a dialog box
-
Capture output
-
Enter the name of an action here. The name should be unique (qgis will make it unique if necessary).
-
Enter the action name here
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Enter the action command here
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Browse for action
-
Click to browse for an action
-
Clicking the button will let you select an application to use as the action
-
...
- ...
+
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
-
Inserts the selected field into the action
-
Inserts the action into the list above
-
Add to action list
-
Update the selected action
-
Update selected action
-
@@ -14073,7 +14009,7 @@ Parser error:
Feature Attributes
-
@@ -14081,7 +14017,7 @@ Parser error:
Attributes changed
-
@@ -14089,7 +14025,7 @@ Parser error:
Load values from layer
-
Select data from attributes in selected layer.
-
Insert NULL value on top
-
@@ -14147,12 +14083,12 @@ Parser error:
Columns
- الأعمدة
+
Reset
- إعادة ضبط
+
Delete selected features (DEL)
-
Pan map to the selected rows (Ctrl+P)
-
Toggle editing mode (Ctrl+E)
-
Select features using an expression
-
Filter
-
Filters the visible features according to the current filter selection and filter string.
-
Apply
-
mMainViewButtonGroup
-
Table View
-
=
-
Update All
-
Advanced Filter (Expression)
-
Use the Expression Builder to define the filter
-
Ctrl+F
- Ctrl+F
+
Show All Features
-
Show Selected Features
-
Show Edited and New Features
-
Show Features Visible On Map
-
The filter defines which features are currently shown in the list or on the table
-
Form View
-
Column Filter
-
Filter all the features which have been edited but not yet saved
-
Attribute table - %1 (%n Feature(s))
feature count
-
-
+
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
-
Update Filtered
-
Error
- خطأ
+
An error occured while evaluating the calculation string:
%1
-
Expression based filter
-
Attribute error
-
Error filtering
-
Geometryless feature added
-
@@ -14508,7 +14437,7 @@ Parser error:
Select All
-
@@ -14516,7 +14445,7 @@ Parser error:
Edit Widget Properties
-
Label on top
-
@@ -14534,67 +14463,67 @@ Parser error:
Normal
-
Lighten
-
Screen
-
Dodge
-
Addition
-
Darken
-
Multiply
-
Burn
-
Overlay
-
Soft light
-
Hard light
-
Difference
- اختلاف
+
Subtract
-
@@ -14626,12 +14555,12 @@ Parser error:
Database: %1
Driver: %2
Database: %3
-
ID
- المعرف
+
Are you sure you want to delete %n bookmark(s)?
number of rows
-
-
+
Stop rendering
-
F5
- F5
+
Case Sensitive
-
Normal
-
QGIS
- QGIS
+
@@ -15105,38 +15027,38 @@ Database:%2
Form
- شكل
+
A calendar widget to enter a date.
-
Date format
-
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
رمز
- Value
قيمة
- Label
رمز
@@ -15156,7 +15078,7 @@ Database:%2
Change...
- تغير...
+
Invert
-
متقدم
- Random colors
-
- Symbol levels...
مستويات الرمز...
- High number of classes!
ارتفاع عدد classes!
- Classification would yield %1 entries which might not be expected. Continue?
تصنيف سوف يسفر عن إدخالات % 1 لا يمكن أن يتوقع منه. هل تريد المتابعة؟
- Error
خطأ
- There are no available color ramps. You can add them in Style Manager.
وهناك لا يوجد سلالم الألوان المتاحة. يمكنك إضافتها في إدارة الأنماط.
- The selected color ramp is not available.
-
- Confirm Delete
تأكيد الإلغاء
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
-
@@ -15269,17 +15191,17 @@ Should the existing classes be deleted before classification?
Form
- شكل
+
Representation for checked state
-
Representation for unchecked state
-
@@ -15287,35 +15209,30 @@ Should the existing classes be deleted before classification?
Shift-click to expand, then collapse others
-
Ctrl (or Alt)-click to toggle all
-
QgsColorButton
- Select Color
-
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -15323,7 +15240,7 @@ Should the existing classes be deleted before classification?
Select Color
-
@@ -15332,7 +15249,7 @@ Should the existing classes be deleted before classification?
Random colors
-
Pixmap not found
-
@@ -15371,7 +15288,7 @@ Should the existing classes be deleted before classification?
Azimut
-
@@ -15388,7 +15305,7 @@ Should the existing classes be deleted before classification?
Composer
مكوُن
@@ -15400,83 +15317,83 @@ Should the existing classes be deleted before classification?
Cu&t
-
Cut
-
&Copy
-
Copy
- نسخ
+
&Paste
-
Paste
-
Edit
- تعديل
+
Normal
-
Simulate Photocopy (Grayscale)
-
Simulate photocopy (grayscale)
-
Simulate Fax (Mono)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
Atlas
-
Settings
- إعدادات
+
%1%
-
Item properties
-
Set as atlas feature for %1
-
x: %1 mm
-
y: %1 mm
-
page: %3
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
Choose a file name to save the map as
اختر اسم ملف لحفظ المخطط
@@ -15596,15 +15513,15 @@ Should the existing classes be deleted before classification?
Empty filename pattern
اسم الملف الشكل فارغ
The filename pattern is empty. A default one will be used.
اسم ملف النمط فارغ. سيتم استخدام واحد افتراضي.
@@ -15615,17 +15532,17 @@ Should the existing classes be deleted before classification?
Unable to write into the directory
غير قادر على الكتابة إلى الدليل
The given output directory is not writable. Cancelling.
-
Atlas processing error
خطأ في معالجة الأطلس
Feature filter parser error: %1
-
Error creating %1.
-
Rendering maps...
تقديم الخرائط ...
Abort
إجهاض
- Big image
صورة كبيرة
- To create image %1x%2 requires about %3 MB of memory. Proceed?
لخلق صورة 1٪ في 2٪ يتطلب حوالي ٪3 ميغابايت من الذاكرة. المتابعة؟
- Choose a file name to save the map image as
اختيار اسم ملف لحفظ صورة الخريطة كما
- Memory Allocation Error
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
-
- Image export error
-
- Directory where to save image files
حيث الدليل لحفظ ملفات الصور
- Image format:
تنسيقات الصور:
- SVG warning
تحذير SVG
- Don't show this message again
لا تظهر هذه الرسالة مرة أخرى
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
-
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
-
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
-
- SVG Format
التنسيق SVG
- Directory where to save SVG files
حيث الدليل لحفظ الملفات SVG
- SVG export error
-
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
نسخ
- Duplicating composer...
تكرار المكون ...
- Duplicate Composer
تكرار المكون
- Composer duplication failed.
تكرار حقل المكون
- Save template
حفظ نموذج
- Composer templates
مكون نموذج
- Save error
حفظ الخطأ
- Error, could not save file
خطاء, لايمكن حفظ الملف
- Load template
تحميل نموذج
- Read error
اقرأ الخطاء
- Error, could not read file
خطاء, لايمكن فراءة الملف
- Composer error
خطأ في المكوُن
- Error, could not create new composer
خطأ، لا يمكن أن صنع مكون جديد
- Loading template into composer...
تحميل نموذج للمكون
- Project contains WMS layers
يحتوي المشروع طبقات WMS
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
-
-
- Project contains composition effects
-
-
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
-
Print as raster
- طباعة كطبقة الشبكية
+ Project contains composition effects
+
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
+
+
+ Print as raster
+
+
+ Landscape
- وضع أفقي
+
@@ -15901,7 +15818,7 @@ Please try a lower resolution or a smaller papersize
Select arrow color
-
Start marker svg file
-
End marker svg file
-
@@ -15969,7 +15886,7 @@ Please try a lower resolution or a smaller papersize
Color...
-
Start marker
-
...
- ...
+
End marker
-
@@ -16013,32 +15930,32 @@ Please try a lower resolution or a smaller papersize
Center
- الوسط
+
Right
- اليمين
+
Left
- اليسار
+
Attribute
-
Heading
-
Alignment
- محاذاة
+
@@ -16071,7 +15988,7 @@ Please try a lower resolution or a smaller papersize
Atlas
-
Ctrl+0
-
Ctrl++
- Ctrl++
+
Ctrl+-
- Ctrl+-
+
Zoom to 100%
-
Ctrl+1
-
Zoom
- تكبير
+
Show Grid
-
Show grid
- أظهر الشبكة
+
Ctrl+'
-
Snap to Grid
-
Snap to grid
-
Ctrl+Shift+'
-
Show Guides
-
Show guides
-
Ctrl+;
-
Snap to Guides
-
Snap to guides
-
Ctrl+Shift+;
-
Smart Guides
-
Smart guides
-
Ctrl+Alt+;
-
Clear Guides
-
Clear guides
-
Ctrl+G
-
Ctrl+Shift+G
-
Ctrl+]
-
Ctrl+[
-
Ctrl+Shift+]
-
Ctrl+Shift+[
-
&Undo
- تراجع
+
&Redo
- تكرار
+
Ctrl+Shift+L
- Ctrl+Shift+L
+
Pa&ste in Place
-
Paste in place
-
Ctrl+Shift+V
- Ctrl+Shift+V
+
&Delete
- &حذف
+
Delete selected items
-
Del
-
De&select All
-
Deselect all
-
Ctrl+Shift+A
- Ctrl+Shift+A
+
Select &All
-
Select all items
-
Ctrl+A
-
&Invert Selection
-
Invert selection
-
Select Next Item &Below
-
Select next item below
-
Ctrl+Alt+[
-
Select Next Item &Above
-
Select next item above
-
Ctrl+Alt+]
-
Pan Composer
-
Composer Options...
-
Show Rulers
-
Show rulers
-
Ctrl+R
-
First Feature
-
Previous Feature
-
Next Feature
-
Last Feature
-
Preview Atlas
-
Print Atlas...
-
Export Atlas as Images...
-
Export Atlas as SVG...
-
Export Atlas as PDF...
-
Export Atlas as PDF
-
Atlas Settings
-
Lock Selected Items
-
Ctrl+L
- Ctrl+L
+
Unlock All
-
Unlock All Items
-
@@ -16891,17 +16808,17 @@ Please try a lower resolution or a smaller papersize
Left
- اليسار
+
Center
- الوسط
+
Right
- اليمين
+
@@ -16909,12 +16826,12 @@ Please try a lower resolution or a smaller papersize
Ascending
- تصاعدي
+
Descending
- تنازلي
+
@@ -16957,7 +16874,7 @@ Please try a lower resolution or a smaller papersize
Use smart breaks changed
-
@@ -16995,95 +16912,95 @@ Please try a lower resolution or a smaller papersize
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
- مم
+
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
تغيير لون الإطار
- Background color changed
تغيير لون الخلفية
- Item position changed
تغيير موقع العنصر
- Item outline width
عنصر خارج خط العرض
- Item frame join style
-
- Item frame toggled
-
- Item background toggled
-
- Select background color
- حدد لون الخلفية
+
- Select frame color
- حدد لون الإطار
+
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
تغيير معرف العنصر
- Item rotation changed
-
@@ -17094,115 +17011,104 @@ Please try a lower resolution or a smaller papersize
الخيارات العامة
- Position and size
الموضع و الحجم
- Reference point
نقطة مرجعية
- X
X
- Y
Y
- Width
عرض
- Height
ارتفاع
- Page
-
- ...
- ...
-
-
- Rotation
-
- °
- °
+
- Frame
إطار
- mm
- مم
+
- Join style
-
- Rendering
-
- Blending mode
-
- Thickness
سماكة
- Color...
-
- Background
خلفية
- Transparency
شفافية
- Item ID
معرف العنصر
- Id
معرف
@@ -17217,7 +17123,7 @@ Please try a lower resolution or a smaller papersize
Label text changed
-
Label color changed
-
- Insert expression
إدراج إستثناء
- Label alignment changed
تغيير محاذاة التسمية
@@ -17352,8 +17258,9 @@ Please try a lower resolution or a smaller papersize
QgsComposerLegend
+ Legend
- الأجندة
+ الأجندة
@@ -17382,12 +17289,12 @@ Please try a lower resolution or a smaller papersize
Item
-
Title style
-
Legend title alignment changed
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
أضبفت أجندة المجموعة
- Map %1
خريطة ٪1
- None
لا شيء
@@ -17573,7 +17480,7 @@ Please try a lower resolution or a smaller papersize
Show feature count for each class of vector layer.
-
Space above text using subgroup style.
-
Subgroup space
-
Space above symbol and symbol label.
-
Column space
-
Allow to split layer items into multiple columns.
-
Title alignment:
-
Left
- اليسار
+
Center
- الوسط
+
Right
- اليمين
+
Update legend. User defined labels are preserved.
-
Update item
-
Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
-
Update all
-
...
- ...
+
Auto update
-
Title font...
-
Subgroup font...
-
Group font...
-
Item font...
-
WMS LegendGraphic
-
Legend width
-
Legend height
-
Space above text using group style.
-
Space between symbol icon and symbol label (symbol label left margin).
-
Icon label space
-
Space below title.
-
Title space
-
@@ -17953,347 +17860,273 @@ Please try a lower resolution or a smaller papersize
QgsComposerMap
- Map %1
خريطة ٪1
- Map will be printed here
ستتم طباعة الخريطة هنا
-
- Grid %1
-
QgsComposerMapWidget
- Cache
تخزين مؤقت
- Render
أعدْ
- Rectangle
مستطيل
- Solid
صلب
- Cross
تقاطع
- Markers
-
-
- Decimal
نظام عد عشري
- DegreeMinute
DegreeMinute
- DegreeMinuteSecond
DegreeMinuteSecond
+ No frame
- لا يوجد إطار
+ لا يوجد إطار
- Zebra
زيبرا
- Map scale changed
تغير مقياس الخريطة
- Map rotation changed
تغير دوران الخريطة
- Map extent changed
تغير حد الخريطة
- Select font color
-
Select grid frame color
-
Select grid frame fill color
-
- Canvas items toggled
-
- None
لا شيء
- Overview frame style changed
-
- Overview centering mode changed
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- change...
- تغير...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
خانة الشبكة مثبتة
- Grid interval changed
تغيير فاصل الشبكة
- Grid offset changed
تغير انحراف الشبكة
- Grid line style changed
-
- Grid type changed
تغير نوع الشبكة
+ Grid cross width changed
- تغيير عرض تقاطع الشبكة
+ تغيير عرض تقاطع الشبكة
- Annotation font changed
تغيير نوع خط الشرح
- Label font changed
+
+
+ Annotation distance changed
تغيرت مسافة الشرح
- Annotation format changed
تغيير شكل الشرح
- Annotation toggled
الشرح مثبت
- Changed annotation precision
تغيير دقة الشرح
- Changed grid frame style
تغيير نمط إطار الشبكة
+ Changed grid frame width
- تغير عرض إطار الشبكة
+ تغير عرض إطار الشبكة
- Changed grid frame line thickness
-
- Grid frame color changed
-
- Grid frame first fill color changed
-
- Grid frame second fill color changed
-
- Inside frame
الإطار الداخلي
- Outside frame
الإطار الخارجي
- Disabled
معطل
- Horizontal
أفقي
- Vertical
عمودي
- Annotation position changed
تغيير موقع الشرح
- Changed annotation direction
اتجاه الشرح تغيير
- Map %1
خريطة ٪1
@@ -18306,377 +18139,287 @@ Please try a lower resolution or a smaller papersize
خيارات الخربطة
- Map
خريطة
- Main properties
خصائص الخربطة
- Update preview
تحديث المعاينة
- Scale
مقياس
- Map rotation
-
- Draw map canvas items
رسم خريطة العناصر اللوحة
- Lock layers for map item
قفل الطبقات لعنصر الخريطة
- Extents
الامتدادات
- X max
X الأقصى
- Y min
Y اﻷدنى
- Y max
Y الأقصى
- Set to map canvas extent
-
- X min
X اﻷدنى
- View extent in map canvas
-
- Controlled by atlas
-
- Margin around feature
-
- %
-
- Fixed scale
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
- Predefined scale (best fit)
-
+ Show grid
- أظهر الشبكة
+ أظهر الشبكة
+ Grid &type
- &نوع الشبكة
+ &نوع الشبكة
- Offset
-
- mm
- مم
+
- Blend mode
-
- Interval
فاصل
- Grid frame
-
- Frame size
-
- Frame line thickness
-
- Color...
-
- Frame fill colors
-
- Marker style
-
-
- Overview blending mode
-
- Invert overview
-
- Center on overview
-
- X
X
- °
- °
+
- Y
Y
- Cross width
عرض التقاطع
- Frame style
نمط الإطار
- Line style
نمط الخط
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
-
-
- CRS
- CRS
-
-
- change...
تغير...
- Interval units
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- No frame
- لا يوجد إطار
-
-
- Zebra
- زيبرا
-
-
- Draw coordinates
رسم الإحداثيات
- Format
التنسيق
- Left
اليسار
- Right
اليمين
- Top
الأعلى
- Bottom
الأسفل
- Font
نوع الخط
- Font...
نوع الخط...
- Font color
-
-
- Distance to map frame
المسافة إلى إطار الخريطة
- Coordinate precision
دقة الإحداثيات
- Font color...
- لون الخط...
+
- Overview
صورة كامل
- Overview frame
إطار الصورة الكامل
- Overview style
نمط الصورة الكامل
- Change...
تغير...
@@ -18686,51 +18429,51 @@ Please try a lower resolution or a smaller papersize
Change item position
-
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
- مكوُن
+
- Picture expression eval error: %1
-
@@ -18743,64 +18486,64 @@ Please try a lower resolution or a smaller papersize
Picture changed
تغيرت الصورة
- Expression based image path
-
- Picture rotation changed
تغير دوران الصورة
- Select new preview directory
حدد معاين الدليل الجديد
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
تزامن الدوران مثبت
- Rotation map changed
تغير دوران الخريطة
- Map %1
خريطة ٪1
- Creating icon for file %1
إنشاء رمز لملف ٪1
@@ -18825,7 +18568,7 @@ Please try a lower resolution or a smaller papersize
Image source
-
Expression
-
Resize mode
- وضع تغيير حجم
+
Placement
-
Zoom
- تكبير
+
Stretch
-
Clip
- مقطع
+
Zoom and resize frame
-
Resize frame to image size
-
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
- الوسط
+
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Loading previews...
-
Image search paths
-
Image rotation
-
QgsComposerScaleBar
- units
-
- km
كم
- m
م
- miles
-
- ft
-
- Nm
-
QgsComposerScaleBarWidget
Single Box
صندوق واحد
Double Box
صندوق مزدوج
Line Ticks Middle
خط علامات التجزئة الأوسط
Line Ticks Down
خط علامات التجزئة الأسفل
Line Ticks Up
خط علامات التجزئة لأعلى
Numeric
عدديٌ
@@ -19069,149 +18812,124 @@ Please try a lower resolution or a smaller papersize
Nautical Miles
-
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
-
-
- Select stroke color
-
-
- Map %1
خريطة ٪1
- Scalebar map changed
تبدل شريط مقياس الخريطة
- Scalebar line width
شريط مقياس عرض الخط
- Scalebar segment size
شريط مقياس حجم الشرائح
- Scalebar segments left
شريط مقياس شرائح اليسار
- Number of scalebar segments changed
-
- Scalebar height changed
تغير شريط مقياس الارتفاع
- Scalebar font changed
تغيير شريط مقياس الخط
- Scalebar font color changed
تغيير لون خط شريط المقياس
- Scalebar color changed
تغيير لون شريط المقياس
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
-
- Scalebar unit text
شريط مقياس وحدة النص
- Scalebar map units per segment
شريط مقياس لكل قطعة من وحادت الخريطة
- Scalebar style changed
تغيير نمط شريط المقياس
- Scalebar label bar space
-
- Scalebar box content space
-
- Scalebar alignment
محاذاة شريط المقياس
- Scalebar changed to map units
-
- Scalebar changed to feet
-
- Scalebar changed to nautical miles
-
- Scalebar changed to meters
-
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -19254,7 +18972,7 @@ Please try a lower resolution or a smaller papersize
Map units per bar unit
-
Join style
-
Cap style
-
Secondary fill color...
-
-
- Stroke color...
-
@@ -19366,37 +19079,37 @@ Please try a lower resolution or a smaller papersize
Ellipse
إهليج
Rectangle
مستطيل
Triangle
مثلث
- Shape style changed
-
- Shape radius changed
-
- Shape type changed
تغير نوع الشكل
@@ -19421,22 +19134,22 @@ Please try a lower resolution or a smaller papersize
Corner radius
-
mm
- مم
+
Style
- نمط
+
Change...
- تغير...
+
@@ -19444,22 +19157,22 @@ Please try a lower resolution or a smaller papersize
Descending
- تنازلي
+
Ascending
- تصاعدي
+
Attribute
-
Sort Order
-
@@ -19473,23 +19186,23 @@ Please try a lower resolution or a smaller papersize
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
-
Table header alignment changed
-
Table grid stroke
-
Table visible only toggled
-
@@ -19606,23 +19319,23 @@ Please try a lower resolution or a smaller papersize
Refresh table data
-
Filter with
- تصنف مع
+
...
- ...
+
mm
- مم
+
Stroke width
-
Color...
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
- اليسار
+
Center
- الوسط
+
Right
- اليمين
+
@@ -19733,7 +19446,7 @@ Please try a lower resolution or a smaller papersize
QGIS
- QGIS
+
QgsComposition
- Label added
أضيف رمز
- Map added
أضيفت الخريطة
- Arrow added
أضيف السهم
- Scale bar added
أضيف شريط المقياس
- Shape added
أضيف الشكل
- Picture added
أضيفت الصورة
- Legend added
أضبفت الأجندة
- Table added
أضيف الجدول
- Aligned items left
العناصر المحاذاة إلى اليسار
- Aligned items horizontal center
-
- Aligned items vertical center
-
- Aligned items right
العناصر المحاذاة إلى اليمين
- Aligned items top
العناصر المحاذاة إلى الأعلى
- Aligned items bottom
العناصر المحاذاة إلى أسفل
- Items locked
-
- Items unlocked
-
- Item z-order changed
تغيير ترتيب الحرفي العناصر
- Remove item group
إزالة مجموعة العنصر
- Frame deleted
حذف الإطار
- Item deleted
حذف العنصر
- Multiframe removed
إزالة متعدد الإطار
@@ -19964,148 +19677,148 @@ Please try a lower resolution or a smaller papersize
Landscape
وضع أفقي
Portrait
اتجاه عمودي
Map %1
- خريطة ٪1
+
- A5 (148x210 mm)
A5 (148x210 مم)
- A4 (210x297 mm)
A4 (210x297 مم)
- A3 (297x420 mm)
A3 (297x420 مم)
- A2 (420x594 mm)
A2 (420x594 مم)
- A1 (594x841 mm)
A1 (594x841 مم)
- A0 (841x1189 mm)
A0 (841x1189 مم)
- B5 (176 x 250 mm)
B5 (176 x 250 مم)
- B4 (250 x 353 mm)
B4 (250 x 353 مم)
- B3 (353 x 500 mm)
B3 (353 x 500 مم)
- B2 (500 x 707 mm)
B2 (500 x 707 مم)
- B1 (707 x 1000 mm)
B1 (707 x 1000 مم)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 مم)
- Legal (8.5x14 in)
Legal (8.5x14 بوصة)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 بوصة)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 بوصة)
- ANSI C (17x22 in)
ANSI C (17x22 بوصة)
- ANSI D (22x34 in)
ANSI D (22x34 بوصة)
- ANSI E (34x44 in)
ANSI E (34x44 بوصة)
- Arch A (9x12 in)
Arch A (9x12 بوصة)
- Arch B (12x18 in)
Arch B (12x18 بوصة)
- Arch C (18x24 in)
Arch C (18x24 بوصة)
- Arch D (24x36 in)
Arch D (24x36 بوصة)
- Arch E (36x48 in)
Arch E (36x48 بوصة)
- Arch E1 (30x42 in)
Arch E1 (30x42 بوصة)
- Custom
معدل
@@ -20123,127 +19836,109 @@ Please try a lower resolution or a smaller papersize
الورق و الجودة
- Presets
الإعدادات المسبقة
- ...
- ...
-
-
- Width
عرض
- Height
ارتفاع
- Units
وحادت
- Number of pages
عدد الصفحات
- Orientation
توجيه
- Export resolution
-
- Print as raster
طباعة كطبقة الشبكية
-
- Snap tolerance
-
-
- px
-
Change...
- تغير...
+
- Page background
-
- Grid
+
+
+ dpi
-
- World file on
-
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
مم
- Grid offset
انحراف الشبكة
- x:
x:
- y:
y:
+ Spacing
- تباعد
+ تباعد
+ Snap to alignments
- الانطباق على المحاذاة
+ الانطباق على المحاذاة
+ Tolerance
- تحمُل
+ تحمُل
@@ -20353,7 +20048,7 @@ Please try a lower resolution or a smaller papersize
The file contains shortcuts created with different locale, so you can't use it.
-
This shortcut is already assigned to action %1. Reassign?
-
@@ -20386,17 +20081,17 @@ Please try a lower resolution or a smaller papersize
Error starting help viewer [%1]
-
Context help
-
<h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
-
@@ -20404,35 +20099,35 @@ Please try a lower resolution or a smaller papersize
The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
CRS
- CRS
+
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
inverse transform
-
forward transform
-
%1 of
%2PROJ.4: %3 +to %4
Error: %5
-
@@ -20493,7 +20188,7 @@ Error: %5
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
cpt-city color ramp
-
Save as standard gradient
-
@@ -20614,7 +20309,7 @@ and current file is [%3]
Control rendering order
-
@@ -20625,32 +20320,32 @@ and current file is [%3]
QGIS Custom Projection
-
This proj4 projection definition is not valid.
-
new CRS
-
The proj4 definition of '%1' is not valid.
-
Northing and Easthing must be in decimal form.
-
Internal Error (source projection invalid?)
-
Custom Coordinate Reference System Definition
-
Define
- تعريف
ID
- المعرف
+
You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
-
Name
- اﻷسم
Parameters
- المعايير
+ المعايير
Test
- الاختبار
Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
-
Geographic / WGS84
- الجغرافية/WGS84
Destination CRS
- الوجهة CRS
North
- الشمال
+ الشمال
East
- الشرق
+ الشرق
Name:
-
Parameters:
-
Copy
existing CRS
-
Add new CRS
-
Remove
- حذف
+
Calculate
- حساب
@@ -20758,29 +20453,29 @@ and current file is [%3]
Object name
- اسم الكائن
Label
- رمز
+ رمز
Description
- الوصف
+ الوصف
Choose a customization INI file
- اختر ملف مخصص INI
Customization files (*.ini)
- تخصيص ملفات (*.ini)
@@ -20788,62 +20483,62 @@ and current file is [%3]
Customization
- تخصيص
Enable customization
- تمكين التخصيص
toolBar
- شريط الأدوات
+ شريط الأدوات
Catch
- أمسك
Switch to catching widgets in main application
- قم بالتبديل إلى إمسكك عناصر واجهة المستخدم في التطبيق الرئيسي
Save
- احفظ
+ احفظ
Save to file
- حفظ الى ملف
Load
- تحميل
Load from file
- تحميل من ملف
Expand All
- توسيع الكل
Collapse All
- طي الكل
+ طي الكل
Select All
- حدد الكل
@@ -20851,17 +20546,17 @@ and current file is [%3]
Dash space pattern
- مساحة نموذج الداش
Dash
- داش
Space
- الفضاء
@@ -20869,232 +20564,232 @@ and current file is [%3]
Description...
-
Edit...
-
Paste
-
Copy
- نسخ
+
Clear
- إزالة
+
string
-
int
-
double
-
Field type:
-
integer
-
unknown type
-
Data defined override
-
expression
-
field
- حقل
+
Deactivate
-
Activate
-
Attribute field
-
No matching field types found
-
Expression
-
Current:
-
Data definition description
-
undefined
-
Parse error: %1
-
'%1' field missing
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
yes
- نعم
+
no
- لا
+
<b>Usage:</b><br>%1<br>
-
<b>Expected input:</b><br>%1<br>
-
<b>Valid input types:</b><br>%1<br>
-
<b>Current definition %1:</b><br>%2
-
string
-
bool [<b>1</b>=True|<b>0</b>=False]
-
string of variable length
-
int [<= 0 =>]
-
int [>= 0]
-
int [>= 1]
-
double [<= 0.0 =>]
-
double [>= 0.0]
-
double coord [<b>X,Y</b>] as <= 0.0 =>
-
double [-180.0 - 180.0]
-
int [0-100]
-
string [<b>r,g,b</b>] as int 0-255
-
string [<b>r,g,b,a</b>] as int 0-255
-
@@ -21102,57 +20797,57 @@ and current file is [%3]
Data defined properties
-
Property
-
Expression
-
Help
- مساعدة
+
double
-
'<red>,<green>,<blue>,<alpha>'
-
'<filename>'
-
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -21160,68 +20855,68 @@ and current file is [%3]
Form
- شكل
+
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
- افتراضي
+
custom
-
preview
-
@@ -21229,13 +20924,13 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
unknown
-
@@ -21243,42 +20938,42 @@ and current file is [%3]
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Destination CRS
-
Source CRS
-
Layer
- طبقة
+
@@ -21286,78 +20981,78 @@ and current file is [%3]
Add PostGIS layers
- إضافة طبقة PostGIS
Connections
- اتصالات
Connect
- اتصال
New
- جديد
+ جديد
Edit
- تعديل
+ تعديل
Delete
- إلغاء
+ إلغاء
Load
Load connections from file
- تحميل
Save connections to file
- حفظ الاتصالات الى ملف
Save
- احفظ
+ احفظ
Also list tables with no geometry
- أيضا قائمة الجداول مع عدم وجود هندسة
Hold dialog open
-
Search options
- خيارات البحث
Search
- بحث
Search mode
- وضع البحث
Search in columns
- بحث في الأعمدة
@@ -21365,22 +21060,22 @@ and current file is [%3]
Bottom Left
- أسفل اليسار
Top Left
- أعلى اليسار
Top Right
- أعلى اليمين
Bottom Right
- أسفل اليمين
@@ -21388,71 +21083,71 @@ and current file is [%3]
Copyright Label Decoration
- ديكور تسمية حقوق التأليف والنشر
Enable copyright label
- تمكين تسمية حقوق الطبع والنشر
&Enter your copyright label here:
- &أدخل تسمية حقوق النشر الخاصة بك هنا:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
&Placement
- &وضع
Bottom Left
- أسفل اليسار
Top Left
- أعلى اليسار
Bottom Right
- أسفل اليمين
Top Right
- أعلى اليمين
&Orientation
- &توجيه
Horizontal
- أفقي
+ أفقي
Vertical
- عمودي
+ عمودي
Color
-
@@ -21463,27 +21158,27 @@ p, li { white-space: pre-wrap; }
Error
- خطأ
+ خطأ
No active layer
- الطبقة مقفلة.
+ الطبقة مقفلة.
Please select a raster layer
- الرجاء تحديد طبقة نقطية
+ الرجاء تحديد طبقة شبكية
Invalid raster layer
- الطبقة الصحيحة شبكية
Layer CRS must be equal to project CRS
- يجب أن تكون الطبقة CRS مساوية للمشروع CRS
@@ -21491,122 +21186,122 @@ p, li { white-space: pre-wrap; }
Grid properties
-
Enable grid
- تمكين الشبكة
Interval X
- فاصل X
Interval Y
- فاصل Y
Grid type
- نوع الشبكة
Line symbol
- رمز الخط
Draw annotation
- رسم توضيحي
Annotation direction
- اتجاه الشرح
Font...
- نوع الخط...
+ نوع الخط...
Distance to map frame
- المسافة إلى إطار الخريطة
+ المسافة إلى إطار الخريطة
Coordinate precision
- دقة الإحداثيات
+ دقة الإحداثيات
Marker symbol
- علامة الرمز
Offset X
- انحراف X
Offset Y
- انحراف Y
Update Interval / Offset from
- تحديث الفاصل / انحراف من
Canvas Extents
- امتدادات اللوحات
Active Raster Layer
- تمكين الطبقة الشبكية
Line
- خطوط
+ خط
Marker
- علامة
Horizontal
- أفقي
+ أفقي
Vertical
- عمودي
+ عمودي
Boundary direction
-
Horizontal and Vertical
- الأفقي و عمودي
@@ -21614,27 +21309,27 @@ p, li { white-space: pre-wrap; }
Bottom Left
- أسفل اليسار
Top Left
- أعلى اليسار
Top Right
- أعلى اليمين
Bottom Right
- أسفل اليمين
North arrow pixmap not found
- السهم الشمال للخريطة بيكسل لم يتم العثور علىه
@@ -21642,62 +21337,62 @@ p, li { white-space: pre-wrap; }
North Arrow Decoration
- ديكور السهم الشمالي
Preview of north arrow
- معاينة السهم الشمالي
Angle
- زاوية
+ زاوية
Placement
- موضع
Placement on screen
- الموضع على الشاشة
Top Left
- أعلى اليسار
Top Right
- أعلى اليمين
Bottom Left
- أسفل اليسار
Bottom Right
- أسفل اليمين
Enable North Arrow
- تمكين السهم الشمالي
Set direction automatically
- تحديد الاتجاه تلقائيا
Pixmap not found
- الخريطة بيكسل لم يتم العثور عليها
@@ -21705,102 +21400,102 @@ p, li { white-space: pre-wrap; }
Bottom Left
- أسفل اليسار
Top Left
- أعلى اليسار
Top Right
- أعلى اليمين
Bottom Right
- أسفل اليمين
Tick Down
-
Tick Up
-
Bar
- شريط
Box
- الصندوق
+ الصندوق
km
- كم
+ كم
mm
- مم
+ مم
cm
- سم
+ سم
m
- م
+ م
miles
- أميال
mile
- ميل
+ ميل
inches
- بُوْصة
foot
- قدم
+ قدم
feet
- الأقدام
+ الأقدام
degree
- درجة
+ درجة
degrees
- درجات
+ درجات
unknown
- مجهول
+ مجهول
@@ -21808,97 +21503,97 @@ p, li { white-space: pre-wrap; }
Scale Bar Decoration
- ديكور شريط المقياس
Placement
- موضع
Top Left
- أعلى اليسار
Top Right
- أعلى اليمين
Bottom Left
- أسفل اليسار
Bottom Right
- أسفل اليمين
Scale bar style
- نمط شريط المقياس
Select the style of the scale bar
- حدد نمط شريط المقياس
Tick Down
-
Tick Up
-
Box
- الصندوق
+ الصندوق
Bar
- شريط
Color of bar
- لون الشريط
Size of bar
- حجم الشريط
Enable scale bar
- تمكين شريط المقياس
Automatically snap to round number on resize
-
metres/km
- أمتار/كم
feet/miles
- قدم/أميال
degrees
- درجات
+ درجات
@@ -21906,7 +21601,7 @@ p, li { white-space: pre-wrap; }
Delete Attributes
- السمات المحذوفة
@@ -21914,12 +21609,12 @@ p, li { white-space: pre-wrap; }
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -22005,122 +21700,122 @@ p, li { white-space: pre-wrap; }
No layer name
- لا يوجد اسم طبقة
Please enter a layer name before adding the layer to the map
- الرجاء إدخال اسم الطبقة قبل إضافة طبقة إلى الخريطة
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Invalid regular expression
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Choose a delimited text file to open
- اختيار ملف نصي محدد للفتح
Text files
- ملفات نصية
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
Regular expression is not valid
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
All files
- جميع الملفات
+ جميع الملفات
@@ -22128,449 +21823,449 @@ p, li { white-space: pre-wrap; }
Create a Layer from a Delimited Text File
- خلق طبقة من ملف نصي محدد
File Name
- إسم الحقل
Full path to the delimited text file
- المسار الكامل إلى ملف نصي محدد
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
-
Layer name
- اسم طبقة
Name to display in the map legend
- الاسم لعرضه في أجندة الخريطة
Name displayed in the map legend
- الاسم المعروض في أجندة خريط
Browse to find the delimited text file to be processed
- استعرض للعثور على ملف نصي محدد لكي تتم معالجته
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
-
Browse...
- استعرض...
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
Tab
- علامة تبويب
Space
- الفضاء
Comma
- فاصلة
Encoding
- ترميز
+
Select the file encoding
-
X and Y coordinates are expressed in degrees/minutes/seconds
-
DMS coordinates
-
Geometry field
-
Name of the field containing well known text value
-
Geometry type
-
Detect
-
Point
- نقاط
+
Line
- خطوط
+
Polygon
- مضلعات
+
Record options
-
Field options
-
File format
-
Number of header lines to discard
-
The number of lines to discard from the beginning of the file
-
Field names are read from the first record. If not selected then fields are numbered
-
First record has field names
-
CSV (comma separated values)
-
Fields are defined by the specified delimiter, quote, and escape characters
-
Custom delimiters
-
Regular expression delimiter
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use spatial index
-
Use an index to improve performance of subset filters (set in layer properties)
-
Use subset index
-
Watch for changes to the file by other applications while QGIS is running
-
Watch file
-
Geometry definition
-
Geometry is a point defined by X and Y coordinate fields
-
Point coordinates
-
Geometry is read as a well known text string from the selected fields
-
Well known text (WKT)
-
The file contains only attribute information - it will not be displayed on the map
-
No geometry (attribute only table)
-
Trim leading and trailing spaces from fields
-
Trim fields
-
Discard empty fields in each record
-
Discard empty fields
-
Number fields use comma for a decimal separator
-
Decimal separator is comma
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Semicolon
- فاصلة منقوطة
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
-
Regular expression used to split each line into fields
-
Layer settings
-
Sample data
-
Colon
- نقطتان
<p align="right">X field</p>
- <p align="right">X field</p>
Name of the field containing x values
- اسم الحقل الذي يحتوي القيم x
<p align="right">Y field</p>
- <p align="right">Y field</p>
Name of the field containing y values
- اسم الحقل الذي يحتوي القيم y
@@ -22578,22 +22273,22 @@ p, li { white-space: pre-wrap; }
Form
- شكل
+ شكل
Heading Label
- إخفاء رمز
Detail label
- تفاصيل الرمز
Category label
- فئة الرمز
@@ -22602,180 +22297,180 @@ p, li { white-space: pre-wrap; }
mm
- مم
+ مم
Map units
- وحدات الخريطة
+ وحدات الخريطة
Around Point
- حول النقطة
Over Point
- عبر النقطة
Line
- خطوط
+ خط
Horizontal
- أفقي
+ أفقي
Free
- مجاني
On line
- على الخط
Above line
- فوق الخط
Below Line
- تحت الخط
Map orientation
- توجيه الخربطة
Pie chart
- مخطط دائري
Text diagram
- نص المخطط
Histogram
- الرسم البياني
Height
- ارتفاع
+ ارتفاع
x-height
- X-ارتفاع
Area
- المنطقة
+ مساحة
Diameter
- قطر
None
- لا شيء
+ لا شيء
Top
- الأعلى
+
Right
- اليمين
+
Bottom
- الأسفل
+
Left
- اليسار
+
Unknown diagram type.
- نوع المخطط غير معروف
The diagram type '%1' is unknown. A default type is selected for you.
- نوع المخطط '٪ 1' غير معروف. يتم اختيار النوع الافتراضي لك.
Bar length: Scale linearly, such as the following value matches the specified size.
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Transparency: %1%
- شفافية: %1%
Diagrams: No attributes added.
-
Interpolation value
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Background color
- لون الخلفية
+ لون الخلفية
Pen color
- لون القلم
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -22783,260 +22478,260 @@ p, li { white-space: pre-wrap; }
Display diagrams
- عرض الرسوم البيانية
Diagram type
- نوع الرسم البياني
Priority:
- أوْلوي:
Low
- منخفض
High
- عالى
Appearance
- المظهر
Background color
- لون الخلفية
+ لون الخلفية
Line color
- لون الخط
Line width
- سُمك الخط
+ سُمك الخط
Font...
- نوع الخط...
+ نوع الخط...
Bar width
- سُمك الشريط
Transparency 0%
- شفافية 0%
Start Angle
-
Only show diagrams with a size inside the specified range.
- تظهر الرسوم البيانية فقط مع حجم داخل النطاق المحدد.
Hide diagrams with a size outside the specified range.
- إخفاء الرسوم البيانية مع حجم خارج النطاق المحدد.
Scale dependent visibility
-
Minimum
- الأدنى
+ الأدنى
Maximum
- الأقصى
+ الأقصى
Size
- حجم
+ حجم
Fixed size
- حجم ثابت
Size units
- حجم الوحدات
Scale linearly between 0 and the following attribute value / diagram size:
-
Attribute
- السمة
Edit expression
-
Find maximum value
- البحث عن القيمة القصوى
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Scale
- مقياس
+ مقياس
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
Increase size of small diagrams
- زيادة حجم الرسوم البيانية الصغيرة
Minimum size
- الحجم الأدنى
Position
- الموضع
Placement
- وضع
Line Options
- خيارات الخط
Distance
- المسافة
Data defined position
- موقع البيانات المعرفة
x
- x
+ x
y
- y
+ y
Automated placement settings
- إعدادات الوضع الآلي
Options
- الخيارات
Label placement
- تسمية الوضع
Bar Orientation
- شريط التوجيه
Up
- أعلى
+ أعلى
Down
- أسفل
+ أسفل
Right
- اليمين
+ اليمين
Left
- اليسار
+ اليسار
Attributes
- الخواص
+ الخواص
Available attributes
- السمات المتاحة
Add expression
-
Assigned attributes
- السمات المعينة
Drag and drop to reorder
- السحب والإفلات لإعادة الترتيب
Color
- لـون
@@ -23045,58 +22740,58 @@ Leave empty to automatically apply the maximum value.
Name
- اﻷسم
Size
- حجم
+ حجم
Date
- التاريخ
Permissions
- الأذونات
Owner
- مالك
Group
- مجموعة
+ مجموعة
Type
- نوع
+ نوع
folder
- مجلد
file
- ملف
link
- رابط
@@ -23104,17 +22799,17 @@ Leave empty to automatically apply the maximum value.
%1 degrees
- 1% درجات
%1 radians
- ٪ 1 راديان
%1 gon
- ٪ 1 غون
@@ -23122,7 +22817,7 @@ Leave empty to automatically apply the maximum value.
Angle
- زاوية
+ زاوية
@@ -23130,50 +22825,50 @@ Leave empty to automatically apply the maximum value.
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
Run layer action
-
Open form
-
Loading features...
-
Abort
- إجهاض
+
Attribute table
- جدول البيانات الوصفية
+
%1 features loaded.
-
@@ -23181,17 +22876,17 @@ Parser error:
...
- ...
+
Expression
-
Column Preview
-
@@ -23199,12 +22894,12 @@ Parser error:
Form
- شكل
+
Dummy Text
-
@@ -23212,12 +22907,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -23225,57 +22920,57 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
-
...
- ...
+
No symbology
-
Feature symbology
-
Symbol layer symbology
-
Select all
- إختيار الكل
+
Unselect all
-
Export features intersecting the current map extent
-
@@ -23284,12 +22979,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -23297,52 +22992,52 @@ Parser error:
Symbol width
- عرض الرمز
+
Symbol height
- ارتفاع الرمز
+
Rotation
-
Outline width
-
Fill color
-
Border color
-
Symbol name
-
Offset
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -23350,12 +23045,12 @@ Parser error:
Encoding:
- ترميز:
Cancel &All
- إالغاء &الكل
@@ -23363,87 +23058,87 @@ Parser error:
Search method
- وضع البحث
Chain (fast)
- سلسلة (سريع)
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
FALP (fastest)
-
Number of candidates
- عدد المرشحين
Point
- نقاط
+ نقاط
Line
- خطوط
+ خط
Polygon
- مضلعات
+ مضلع
(i.e. including colliding objects)
- (i.e. including colliding objects)
Draw text as outlines (recommended)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
Show all labels and features for all layers
- عرض كل العلامات والسمات لجميع طبقات
Automated Placement Engine
-
Show candidates (for debugging)
- عرض المرشحين (من أجل التصحيح)
@@ -23451,7 +23146,7 @@ Parser error:
Error
- خطأ
+ خطأ
@@ -23459,35 +23154,35 @@ Parser error:
Dialog
- حوار
+ حوار
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
Always show details
- تظهر دائما التفاصيل
Details >>
- التفاصيل >>
@@ -23495,7 +23190,7 @@ p, li { white-space: pre-wrap; }
Expression string builder
- منشئ سلسلة التعبير
@@ -23503,122 +23198,122 @@ p, li { white-space: pre-wrap; }
(String Concatenation)
- (تسلسل السلسلة)
Joins two values together into a string
- ضم قيمتين معا في سلسلة
Usage
- إستخدام
'Dia' || Diameter
-
Search
- بحث
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Parser Error
- خطأ في التوزيع
Eval Error
- تقييم الخطأ
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
- مزيد من المعلومات حول الخطأ التعبير
Load top 10 unique values
- تحميل أفضل 10 قيم فريدة
Load all unique values
- تحميل كافة القيم الفريدة
@@ -23626,148 +23321,148 @@ p, li { white-space: pre-wrap; }
Form
- شكل
+ شكل
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Operators
- عمليات
Equal operator
-
=
- =
Addition operator
-
+
- +
Subtraction operator
-
-
- -
Division operator
-
/
- /
Multiplication operator
-
*
- *
Power operator
-
^
- ^
String Concatenation
-
||
- ||
Open Bracket
-
(
- (
Close Bracket
-
)
- )
Output preview is generated <br> using the first feature from the layer.
- يتم إنشاء إخراج المعاينة <br> باستخدام ميزة الأولى من طبقة.
Output preview:
- معاينة الإخراج:
Expression
- تعبير
@@ -23775,37 +23470,37 @@ p, li { white-space: pre-wrap; }
Select By Expression
-
Close
- إغلاق
+
...
- ...
+
Select
- إختيار
+
Add to selection
-
Remove from selection
-
Select within selection
-
@@ -23813,22 +23508,22 @@ p, li { white-space: pre-wrap; }
layer
-
map view
-
user defined
-
Extent (current: %1)
-
@@ -23836,37 +23531,37 @@ p, li { white-space: pre-wrap; }
Form
- شكل
+
West
- الغرب
+
East
- الشرق
+
North
- الشمال
+
South
- الجنوب
+
Layer extent
-
Map view extent
-
@@ -23874,7 +23569,7 @@ p, li { white-space: pre-wrap; }
Run actions
- تشغيل الإجراء
@@ -23882,7 +23577,7 @@ p, li { white-space: pre-wrap; }
Dialog
- حوار
+
@@ -23891,50 +23586,52 @@ p, li { white-space: pre-wrap; }
Not available for layer
- لا تتوفر للطبقة
Only update %1 selected features
-
Evaluation error
- خطأ في التقييم
+ خطأ تقييمي
Provider error
- خطأ في الموفر
Could not add the new field to the provider.
- لا يمكن إضافة الحقل الجديد إلى الموفر.
Error
- خطأ
+ خطأ
An error occured while evaluating the calculation string:
%1
- حدث خطأ أثناء تقييم السلسلة الحسابية:
+1%
Please enter a field name
- الرجاء إدخال اسم ملف
The expression is invalid see (more info) for details
-
+التعبير هو غير صالحة انظر (مزيد من المعلومات) لمزيد من التفاصيل
@@ -23942,47 +23639,47 @@ p, li { white-space: pre-wrap; }
Field calculator
- حقل حساب
Only update selected features
- غير الميزات المحددة فقط
Create a new field
- إنشاء حقل جديد
Output field name
- إنتاج إسم الحقل
Output field type
- نوع الحقل المنتج
Output field width
- عرض الحقل المنتج
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
- دقة
+ دقة
Update existing field
- تحديث الحقول الموجودة
@@ -23990,7 +23687,7 @@ p, li { white-space: pre-wrap; }
Expression dialog
-
@@ -23998,201 +23695,201 @@ p, li { white-space: pre-wrap; }
Label
- رمز
+ رمز
Id
- معرف
+ معرف
Name
- اﻷسم
Type
- نوع
+ نوع
Type name
-
Length
- طول
+ طول
Precision
- دقة
+ دقة
Comment
- التعليق
+ التعليق
Edit widget
- تحرير القطعة
Alias
- الاسم المستعار
Layer
- طبقة
+
Field
-
Name conflict
- تسمية الصراع
The attribute could not be inserted. The name already exists in the table.
- لا يمكن إدراج السمة. اسم بالفعل موجود في الجدول.
Added attribute
- السمة المضافة
Deleted attribute
- السمة المحذوفة
+ السمة المحذوفة
Line edit
- الخط المعدل
Unique values
- القيم الفريدة من نوعها
Unique values editable
- قائمة القيم الفريدة من نوعها للتحرير
Classification
- تصنيف
Value map
- قيمة الخريطة
Edit range
- تعديل النطاق
Slider range
- نطاق مربع التمرير
Dial range
- نطاق الطلب
File name
- إسم الملف
Enumeration
- تعداد
Immutable
- ثابت
Hidden
- مخفي
Checkbox
- خانة الاختيار
Text edit
- تحرير النص
Calendar
- رزنامة
Value relation
- قيمة العلاقة
UUID generator
-
Photo
-
Web view
-
Color
-
Editor Widget
-
Select edit form
- حدد شكل التحرير
UI file
- ملف UI
@@ -24200,123 +23897,123 @@ p, li { white-space: pre-wrap; }
Field calculator
- حقل حساب
Click to toggle table editing
-
Toggle editing mode
-
New column
- عمود جديد
Ctrl+N
- Ctrl+N
+ Ctrl+N
Delete column
- حذف العمود
+ حذف العمود
Fields
-
Ctrl+X
- Ctrl+X
+ Ctrl+X
Relations
-
...
- ...
+ ...
Edit UI
- تعديل UI
+
- +
-
- -
>
- <
^
- ^
v
- v
Suppress attribute form pop-up after feature creation
-
Default
- افتراضي
+
On
-
Off
-
Autogenerate
- الإنشاء التلقائي
Drag and drop designer
- السحب والإفلات لمصمم
Provide ui-file
- موفر ملف-ui
Attribute editor layout:
- محرر مصمم السمة:
Python Init function
-
@@ -24346,12 +24043,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
...
- ...
+
Select a file
-
@@ -24360,13 +24057,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
-
Map unit
-
@@ -24374,12 +24071,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Delete
- إلغاء
+ إلغاء
Qt designer file
- ملف مصمم Qt
@@ -24387,12 +24084,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Form annotation
- شرح الشكل
...
- ...
+ ...
@@ -24401,13 +24098,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
map units
- وحدات الخريطة
+ وحدات الخريطة
pixels
- البكسلات
@@ -24415,12 +24112,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Recenter
- إعادة تمركز
Remove
- حذف
+ حذف
@@ -24428,12 +24125,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
internal GPS
- GPS داخلي
local gpsd
- GPSD المحلية
@@ -24441,17 +24138,17 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
New device %1
- الجهاز الجديد ٪1
Are you sure?
- هل أنت متأكد؟
Are you sure that you want to delete this device?
- هل أنت متأكد أنك تريد حذف هذا الجهاز؟
@@ -24459,111 +24156,111 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
GPS Device Editor
- محرر جهاز GPS
Devices
- الأجهزة
Delete
- إلغاء
+ إلغاء
New
- جديد
+ جديد
Update
- تحديث
Device name
- اسم الجهاز
This is the name of the device as it will appear in the lists
- هذا هو اسم الجهاز الذي سوف يظهر في القوائم
Commands
- أوامر
Track download
- تنزيل المقطع
Route upload
- تحميل الطريق
Waypoint download
- تنزيل الإحداثية
The command that is used to download routes from the device
- الأمر الذي يتم استخدامه لتحميل المسارات من الجهاز
Route download
- تنزيل الطريق
The command that is used to upload waypoints to the device
- الأمر الذي يتم استخدامه لتحميل نقاط الطريق إلى الجهاز
Track upload
- تحميل المقطع
The command that is used to download tracks from the device
- الأمر الذي يتم استخدامه لتنزيل المسارات من الجهاز
The command that is used to upload routes to the device
- الأمر الذي يتم استخدامه لتحميل المسارات على الجهاز
The command that is used to download waypoints from the device
- الأمر الذي يتم استخدامه لتنزيل نقاط الطريق من الجهاز
The command that is used to upload tracks to the device
- الأمر الذي يتم استخدامه لتحميل نقاط الطريق إلى الجهاز
Waypoint upload
- تحميل إحداثية
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
-
@@ -24571,149 +24268,149 @@ p, li { white-space: pre-wrap; }
/gps
- /gps
No path to the GPS port is specified. Please enter a path then try again.
-
Connecting...
-
Connecting to GPS device...
-
Timed out!
-
Failed to connect to GPS device.
-
Connected!
-
Dis&connect
-
Connected to GPS device.
-
Error opening log file.
-
Disconnected...
-
&Connect
-
Disconnected from GPS device.
-
%1 m
-
%1 km/h
-
Automatic
-
Manual
-
3D
- 3D
+
2D
- 2D
+
No fix
-
Differential
-
Non-differential
-
No position
-
Valid
-
Invalid
-
Not enough vertices
-
Cannot close a line feature until it has at least two vertices.
-
Cannot close a polygon feature until it has at least three vertices.
-
Feature added
-
Error
- خطأ
+
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
Cannot add feature. Unknown WKB type. Choose a different layer and try again.
-
Save GPS log file as
-
NMEA files
-
&Add feature
-
&Add Point
-
&Add Line
-
&Add Polygon
-
@@ -24784,12 +24481,12 @@ Errors: %2
GPS Connect
-
&Add feature
-
Add track point
-
Reset track
-
...
- ...
+
Position
-
Signal
-
Satellite
-
Options
-
Debug
-
&Connect
-
latitude of position fix (degrees)
-
Longitude
-
longitude of position fix (degrees)
-
antenna altitude with respect to geoid (mean sea level)
-
Altitude
-
Latitude
-
Time of fix
-
date/time of position fix (UTC)
-
speed over ground
-
Speed
-
track direction (degrees)
-
Direction
-
Horizontal Dilution of Precision
-
HDOP
-
Vertical Dilution of Precision
-
VDOP
-
Position Dilution of Precision
-
PDOP
-
GPS receiver configuration 2D/3D mode: Automatic or Manual
-
Mode
-
position fix dimensions: 2D, 3D or No fix
-
Dimensions
- الأبعاد
+
quality of the position fix: Differential, Non-differential or No position
-
Quality
-
position fix status: Valid or Invalid
-
Status
-
number of satellites used in the position fix
-
Satellites
-
H accurancy
-
V accurancy
-
Connection
-
Autodetect
-
Serial device
-
Refresh serial device list
-
Port
-
Host
-
Device
-
00000;
-
gpsd
-
Internal
-
Digitizing
- الترقيم
+
Track
-
Automatically add points
-
Track width in pixels
-
width
-
Color
-
save layer after every feature added
-
Automatically save added feature
-
save GPS data (NMEA sentences) to a file
-
Log File
-
browse for log file
-
Map centering
-
when leaving
-
% of map extent
-
never
-
always
-
Cursor
-
Small
-
Large
-
@@ -25155,55 +24852,55 @@ gray = no data
&GPS Tools
-
&Create new GPX layer
-
Creates a new GPX layer and displays it on the map canvas
-
&GPS
-
Save new GPX file as...
-
GPS eXchange file
-
Could not create file
-
Unable to create a GPX file with the given name. Try again with another name or in another directory.
-
GPX Loader
-
Unable to read the selected file.
Please reselect a valid file.
-
Could not start process
-
Could not start GPSBabel!
-
Importing data...
-
Cancel
- إالغاء
+
Could not import data from %1!
-
Error importing data
-
Could not convert data from %1!
-
Error converting data
-
Not supported
-
This device does not support downloading of %1.
-
Downloading data...
-
Could not download data from GPS!
-
Error downloading data
-
This device does not support uploading of %1.
-
Uploading data...
-
Error while uploading data to GPS!
-
Error uploading data
-
@@ -25316,26 +25013,26 @@ Please reselect a valid file.
Waypoints
-
Routes
-
Tracks
-
Choose a file name to save under
-
GPS eXchange format
-
Select GPX file
-
Select file and format to import
-
Waypoints from a route
-
Waypoints from a track
-
Route from waypoints
-
Track from waypoints
-
GPS eXchange format (*.gpx)
-
@@ -25387,150 +25084,150 @@ Please reselect a valid file.
GPS Tools
- أدوات GPS
+
Load GPX file
-
File
- ملف
+
Browse...
-
Feature types
-
Waypoints
-
Routes
-
Tracks
-
Import other file
-
File to import
-
Feature type
-
Layer name
-
GPX output file
-
Save As...
- حفظ بإسم
+
(Note: Selecting correct file type in browser dialog important!)
-
Download from GPS
-
GPS device
-
Edit devices...
-
Port
-
Refresh
- أنعشْ
+
Output file
- ملف الإخراج
+
Upload to GPS
-
Data layer
-
Edit devices
-
GPX Conversions
-
GPX input file
-
Conversion
- تحويل
+
@@ -25538,17 +25235,17 @@ Please reselect a valid file.
Bad URI - you need to specify the feature type.
-
GPS eXchange file
-
Digitized in QGIS
-
@@ -25556,52 +25253,52 @@ Please reselect a valid file.
Dataset Description
-
Band %1
-
X: %1 Y: %2 Bands: %3
-
Dimensions
- الأبعاد
+
Origin
-
Pixel Size
-
Band
-
Format not supported
-
Cannot read data
-
Cannot get GDAL raster band: %1
- لا يمكن الحصول على الشريط GDAL للطبقة الشبكية: % 1
+
@@ -25609,17 +25306,17 @@ Please reselect a valid file.
Define this layer's coordinate reference system:
-
This layer appears to have no projection specification.
-
By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.
-
@@ -25627,7 +25324,7 @@ Please reselect a valid file.
Coordinate Reference System Selector
-
@@ -25635,17 +25332,17 @@ Please reselect a valid file.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -25653,122 +25350,122 @@ Please reselect a valid file.
A5 (148x210 mm)
- A5 (148x210 مم)
+
A4 (210x297 mm)
- A4 (210x297 مم)
+
A3 (297x420 mm)
- A3 (297x420 مم)
+
A2 (420x594 mm)
- A2 (420x594 مم)
+
A1 (594x841 mm)
- A1 (594x841 مم)
+
A0 (841x1189 mm)
- A0 (841x1189 مم)
+
B5 (176 x 250 mm)
- B5 (176 x 250 مم)
+
B4 (250 x 353 mm)
- B4 (250 x 353 مم)
+
B3 (353 x 500 mm)
- B3 (353 x 500 مم)
+
B2 (500 x 707 mm)
- B2 (500 x 707 مم)
+
B1 (707 x 1000 mm)
- B1 (707 x 1000 مم)
+
B0 (1000 x 1414 mm)
- B0 (1000 x 1414 مم)
+
Legal (8.5x14 inches)
-
ANSI A (Letter; 8.5x11 inches)
-
ANSI B (Tabloid; 11x17 inches)
-
ANSI C (17x22 inches)
-
ANSI D (22x34 inches)
-
ANSI E (34x44 inches)
-
Arch A (9x12 inches)
-
Arch B (12x18 inches)
-
Arch C (18x24 inches)
-
Arch D (24x36 inches)
-
Arch E (36x48 inches)
-
Arch E1 (30x42 inches)
-
@@ -25776,73 +25473,73 @@ Please reselect a valid file.
Configure Georeferencer
-
Point tip
-
Show IDs
-
Show coords
-
Residual units
-
Pixels
-
Use map units if possible
-
PDF report
-
Left margin
-
mm
- مم
+
Right margin
-
Show Georeferencer window docked
-
PDF map
-
Paper size
-
@@ -25850,16 +25547,16 @@ Please reselect a valid file.
Description georeferencer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
@@ -25869,7 +25566,7 @@ p, li { white-space: pre-wrap; }
&Georeferencer
-
@@ -25877,44 +25574,44 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
All other files (*)
-
Open raster
-
%1 is not a supported raster data source
-
Unsupported Data Source
-
Raster loaded: %1
-
Georeferencer - %1
-
Transform:
-
Info
- معلومات
+
GDAL scripting is not supported for %1 transformation
-
Load GCP points
-
GCP file
-
No GCP points to save
-
Save GCP points
-
Please load raster to be georeferenced
-
Help
- مساعدة
+
Panels
- الواح
+
Toolbars
-
Current transform parametrisation
-
Coordinate:
-
Current map coordinate
-
None
- لا شيء
+
Coordinate of image(column/line)
-
Unable to open GCP points file %1
-
Save GCPs
-
Save GCP points?
-
Failed to get linear transform parameters
-
World file exists
-
<p>The selected file already seems to have a world file! Do you want to replace it with the new world file?</p>
-
Failed to compute GCP transform: Transform is not solvable
-
Error
- خطأ
+
Could not write to %1
-
map units
- وحدات الخريطة
+
pixels
-
Transformation parameters
-
Translation x
-
Translation y
-
Scale x
-
Scale y
-
Rotation [degrees]
-
Mean error [%1]
-
Residuals
-
yes
- نعم
+
no
- لا
+
Translation (%1, %2)
-
Scale (%1, %2)
-
Rotation: %1
-
Mean error: %1
-
Copy in clipboard
-
%1
-
GDAL script
-
Please set transformation type
-
Please set output raster name
-
%1 requires at least %2 GCPs. Please define more
-
Linear
-
Helmert
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin plate spline (TPS)
-
Projective
-
Not set
-
@@ -26210,221 +25907,221 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
File
- ملف
+
View
- عرض
+
Edit
- تعديل
+
Settings
- إعدادات
+
GCP table
-
toolBar
- شريط الأدوات
+
Open raster
-
Ctrl+O
- Ctrl+O
+
Zoom In
- تكبير
+
Ctrl++
- Ctrl++
+
Zoom Out
- تصغير
+
Ctrl+-
- Ctrl+-
+
Zoom to Layer
- تكبير للطبقة
+
Ctrl+Shift+F
- Ctrl+Shift+F
+
Pan
-
Transformation settings
-
Add point
-
Ctrl+A
-
Delete point
-
Ctrl+D
- Ctrl+D
+
Quit
- إنهاء
+
Start georeferencing
-
Ctrl+G
-
Generate GDAL script
-
Ctrl+C
- Ctrl+C
+
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
Save GCP points as...
-
Ctrl+S
- Ctrl+S
+
Load GCP points
-
Ctrl+L
- Ctrl+L
+
Configure Georeferencer
-
Ctrl+P
- Ctrl+P
+
Raster properties
-
Move GCP point
-
Zoom Next
- تكبير التالى
+
Zoom Last
- تكبير الأخير
+
Local histogram stretch
-
Full histogram stretch
-
@@ -26432,48 +26129,48 @@ p, li { white-space: pre-wrap; }
GDAL files
-
DEM files
-
All files
- جميع الملفات
+
Open raster file
-
Invalid Path: The file is either unreadable or does not exist
-
Invalid URL:
-
Do you want to add the datasource anyway?
-
Open 3D model file
-
Model files
-
@@ -26481,209 +26178,209 @@ p, li { white-space: pre-wrap; }
Globe Settings
- إعدادات الغلوب
+
Elevation
-
Type
- نوع
+
Raster
- طبقة شبكية
+
TMS
-
URL/File
-
...
- ...
+
Up
- أعلى
+
Map
- خريطة
+
Base Layer
-
URL
- الرابط
+
TextLabel
- تسمية نصية
+
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Down
- أسفل
+
Add
-
Remove
- حذف
+
Cache
- تخزين مؤقت
+
Path
- مسار
+
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Model
-
Point Layer
-
3D Model
-
Stereo
-
Stereo Mode
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -26692,32 +26389,32 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Abort
- إجهاض
+
Error: %1 on line %2, column %3
-
WFS
- WFS
+
GML Getfeature network request failed with error: %1
-
Network
-
@@ -26725,7 +26422,7 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
@@ -26733,90 +26430,90 @@ p, li { white-space: pre-wrap; }
Millimeter
-
Map unit
-
Color (start)
-
Color (end)
-
Angle
- زاوية
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
QgsGraduatedSymbolRendererV2Model
- Symbol
- رمز
+
- Value
- قيمة
+
- Label
- رمز
+
@@ -26824,125 +26521,125 @@ p, li { white-space: pre-wrap; }
Column
- عمود
+
Symbol
- رمز
+
Change...
- تغير...
+
Classes
-
Color ramp
- تدرج الألوان
+
Mode
-
Equal Interval
-
Quantile (Equal Count)
-
Natural Breaks (Jenks)
-
Standard Deviation
-
Pretty Breaks
-
Invert
-
Classify
- تصنيف
+
Add class
-
Delete
- إلغاء
+
Delete all
- حذف الكل
+
Advanced
- متقدم
+
- Symbol levels...
- مستويات الرمز...
+
- Error
- خطأ
+
- There are no available color ramps. You can add them in Style Manager.
- وهناك لا يوجد سلالم الألوان المتاحة. يمكنك إضافتها في إدارة الأنماط.
+
- The selected color ramp is not available.
-
- Warning
-
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
-
- Renderer creation has failed.
-
@@ -26950,37 +26647,37 @@ Press cancel to abort breaks calculation or OK to continue.
Column
- عمود
+
Value
- قيمة
+
Type
- نوع
+
Layer
- طبقة
+
Warning
-
ERROR
-
OK
-
@@ -26988,47 +26685,47 @@ Press cancel to abort breaks calculation or OK to continue.
GRASS Attributes
-
Tab 1
-
result
-
Update database record
-
Update
-
Add new category using settings in GRASS Edit toolbox
-
New
- جديد
+
Delete selected category
-
Delete
- إلغاء
+
@@ -27036,49 +26733,49 @@ Press cancel to abort breaks calculation or OK to continue.
Tools
-
Add selected map to canvas
-
Copy selected map
-
Rename selected map
-
Delete selected map
-
Set current region to selected map
-
Refresh
- أنعشْ
+
New name
-
New name for layer "%1"
-
Warning
-
Cannot copy map %1@%2
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot rename map %1
-
Information
- معلومة
+
Remove the selected layer(s) from canvas before continue.
-
Question
-
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
-
+
Cannot delete map %1
-
Cannot write new region
-
@@ -27159,212 +26849,212 @@ Press cancel to abort breaks calculation or OK to continue.
Warning
-
You are not owner of the mapset, cannot open the vector for editing.
-
Cannot open vector for update.
-
Edit tools
-
New point
-
New line
-
New boundary
-
New centroid
-
Move vertex
-
Add vertex
-
Delete vertex
-
Move element
-
Split line
-
Delete element
-
Edit attributes
-
Close
- إغلاق
+
Background
- خلفية
+
Highlight
-
Dynamic
-
Point
- نقاط
+
Line
- خطوط
+
Boundary (no area)
-
Boundary (1 area)
-
Boundary (2 areas)
-
Centroid (in area)
-
Centroid (outside area)
-
Centroid (duplicate in area)
-
Node (1 line)
-
Node (2 lines)
-
Next not used
-
Manual entry
-
No category
-
Info
- معلومات
+
The table was created
-
Tool not yet implemented.
-
Cannot check orphan record: %1
-
Orphan record was left in attribute table. <br>Delete the record?
-
Cannot delete orphan record:
-
Cannot describe table for field %1
-
Left: %1
-
-- Middle: %1
-
-- Right: %1
-
@@ -27375,17 +27065,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select line segment
-
New vertex position
-
Release
-
@@ -27393,7 +27083,7 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
@@ -27401,95 +27091,95 @@ Press cancel to abort breaks calculation or OK to continue.
GRASS Edit
-
Category
-
Mode
-
Layer
- طبقة
+
Settings
- إعدادات
+
Snapping in screen pixels
-
Symbology
-
Line width
- سُمك الخط
+
Marker size
-
Disp
-
Color
-
Type
- نوع
+
Index
-
Table
- جدول
+
Column
- عمود
+
Length
- طول
+
Add Column
-
Create / Alter Table
-
@@ -27499,17 +27189,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
Delete selected / select next
-
Release selected
-
@@ -27520,17 +27210,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select vertex
-
Delete vertex
-
Release vertex
-
@@ -27541,17 +27231,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
New location
-
Release selected
-
@@ -27561,12 +27251,12 @@ Press cancel to abort breaks calculation or OK to continue.
Select vertex
-
Select new position
-
@@ -27578,18 +27268,18 @@ Press cancel to abort breaks calculation or OK to continue.
New vertex
-
Undo last vertex
-
Close line
-
@@ -27597,12 +27287,12 @@ Press cancel to abort breaks calculation or OK to continue.
New centroid
-
New point
-
@@ -27611,23 +27301,23 @@ Press cancel to abort breaks calculation or OK to continue.
Select position on line
-
Split the line
-
Release the line
-
Select point on line
-
@@ -27635,32 +27325,32 @@ Press cancel to abort breaks calculation or OK to continue.
Cancel
- إالغاء
+
Ok
-
<font color='red'>Enter a name!</font>
-
<font color='red'>This is name of the source!</font>
-
<font color='red'>Exists!</font>
-
Overwrite
-
@@ -27668,300 +27358,300 @@ Press cancel to abort breaks calculation or OK to continue.
Mapcalc tools
-
Add map
-
Add constant value
-
Add operator or function
-
Add connection
-
Select item
-
Delete selected item
-
Open
- فتح
+
Save
- احفظ
+
Save as
-
Addition
-
Subtraction
-
Multiplication
-
Division
-
Modulus
-
Exponentiation
-
Equal
-
Not equal
-
Greater than
-
Greater than or equal
-
Less than
-
Less than or equal
-
And
-
Or
-
Absolute value of x
-
Inverse tangent of x (result is in degrees)
-
Inverse tangent of y/x (result is in degrees)
-
Current column of moving window (starts with 1)
-
Cosine of x (x is in degrees)
-
Convert x to double-precision floating point
-
Current east-west resolution
-
Exponential function of x
-
x to the power y
-
Convert x to single-precision floating point
-
Decision: 1 if x not zero, 0 otherwise
-
Decision: a if x not zero, 0 otherwise
-
Decision: a if x not zero, b otherwise
-
Decision: a if x > 0, b if x is zero, c if x < 0
-
Convert x to integer [ truncates ]
-
Check if x = NULL
-
Natural log of x
-
Log of x base b
-
Largest value
-
Median value
-
Smallest value
-
Mode value
-
1 if x is zero, 0 otherwise
-
Current north-south resolution
-
NULL value
-
Random value between a and b
-
Round x to nearest integer
-
Current row of moving window (Starts with 1)
-
Sine of x (x is in degrees)
sin(x)
-
Square root of x
sqrt(x)
-
Tangent of x (x is in degrees)
tan(x)
-
Current x-coordinate of moving window
-
Current y-coordinate of moving window
-
Output
- المخرجات
+
Warning
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot get region of map %1
-
No GRASS raster maps currently in QGIS
-
Cannot create 'mapcalc' directory in current mapset.
-
New mapcalc
-
Enter new mapcalc name:
-
Enter vector name
-
The file already exists. Overwrite?
-
Save mapcalc
-
File name empty
-
Cannot open mapcalc file
-
The mapcalc schema (%1) not found.
-
Cannot open mapcalc schema (%1)
-
Cannot read mapcalc schema (%1):
-
%1
at line %2 column %3
-
@@ -28068,12 +27758,12 @@ at line %2 column %3
MainWindow
- النافذة الرئيسية
+
Output
- المخرجات
+
@@ -28081,7 +27771,7 @@ at line %2 column %3
Module: %1
-
Warning
-
The module file (%1) not found.
-
Cannot open module file (%1)
-
Cannot read module file (%1)
-
%1
at line %2 column %3
-
Module %1 not found
-
Cannot find man page %1
-
Please ensure you have the GRASS documentation installed.
-
Not available, description not found (%1)
-
Not available, cannot open description (%1)
-
Not available, incorrect description (%1)
-
Run
-
Cannot get input region
-
Input %1 outside current region!
-
Use Input Region
-
Output %1 exists! Overwrite?
-
Cannot find module %1
-
Cannot start module: %1
-
Stop
-
<B>Successfully finished</B>
-
<B>Finished with error</B>
-
<B>Module crashed or killed</B>
-
@@ -28215,42 +27905,42 @@ at line %2 column %3
GRASS Module
-
Options
-
Output
- المخرجات
+
Manual
-
TextLabel
- تسمية نصية
+
Run
-
View output
-
Close
- إغلاق
+
@@ -28258,17 +27948,17 @@ at line %2 column %3
Attribute field
-
Warning
-
'layer' attribute in field tag with key= %1 is missing.
-
@@ -28276,17 +27966,17 @@ at line %2 column %3
File
- ملف
+
%1: missing value
-
%1: directory does not exist
-
@@ -28294,44 +27984,44 @@ at line %2 column %3
OGR/PostGIS/GDAL Input
-
Warning
-
Cannot find layeroption %1
-
Cannot find whereoption %1
-
Password
- كلمة السر
+
Select a layer
-
PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
-
%1: no input
-
@@ -28339,7 +28029,7 @@ at line %2 column %3
Input
- إدخال
+
Warning
-
Cannot find typeoption %1
-
Cannot find values for typeoption %1
-
Cannot find layeroption %1
-
GRASS element %1 not supported
-
Use region of this map
-
Select a layer
-
%1 (band %2)
-
Cannot get provider
-
%1: no input
-
@@ -28403,38 +28093,38 @@ at line %2 column %3
Browse
- استعرض
+
Output file
- ملف الإخراج
+
GeoTIFF
-
Warning
-
Cannot parse version_min %1
-
Cannot parse version_max %1
-
%1: missing value
-
@@ -28442,7 +28132,7 @@ at line %2 column %3
Selected categories
-
@@ -28466,117 +28156,117 @@ at line %2 column %3
Warning
-
Cannot find module %1
-
Cannot start module %1
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot read module description (%1):
-
%1
at line %2 column %3
-
Region
-
Input layers
-
Current map canvas
-
Cannot find key %1
-
<< Hide advanced options
-
Show advanced options >>
-
Item with key %1 not found
-
Item with id %1 not found
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
-
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
Cannot set region of map %1
-
@@ -28584,60 +28274,60 @@ at line %2 column %3
Database
-
Location 1
-
System mapset
-
User's mapset
-
Location 2
-
Enter path to GRASS database
-
The directory doesn't exist!
-
No writable locations, the database is not writable!
-
Enter location name!
-
The location exists!
-
Selected projection is not supported by GRASS!
-
Warning
-
Cannot create projection.
-
Cannot reproject previously set region, default region set.
-
North must be greater than south
-
East must be greater than west
-
Regions file (%1) not found.
-
Cannot open locations file (%1)
-
Cannot read locations file (%1):
-
%1
at line %2 column %3
-
Cannot create QgsCoordinateReferenceSystem
-
Cannot reproject selected region.
-
Cannot reproject region
-
Enter mapset name.
-
The mapset already exists
-
Database:
-
Location:
-
Mapset:
-
Create location
-
Cannot create new location: %1
-
Create mapset
-
Cannot create new mapset directory
-
Cannot open DEFAULT_WIND
-
Cannot open WIND
-
New mapset
-
New mapset successfully created, but cannot be opened: %1
-
New mapset successfully created and set as current working mapset.
-
@@ -28793,211 +28483,211 @@ at line %2 column %3
New Mapset
-
GRASS Database
-
Tree
-
Comment
- التعليق
+
Example directory tree:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
-
Database Error
- خطأ فى قواعد البيانات
+
Database:
-
Browse...
-
Select existing directory or create a new one:
-
GRASS Location
-
Location
-
Select location
-
Create new location
-
Location Error
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
-
Projection
-
Projection Error
-
Coordinate system
-
Not defined
-
Default GRASS Region
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
-
Set current QGIS extent
-
Set
-
Region Error
-
S
- S
+
W
- W
+
E
- E
+
N
- N
+
Mapset
-
New mapset:
-
Mapset Error
-
<p align="center">Existing mapsets</p>
-
Owner
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
-
Create New Mapset
-
Location:
-
Mapset:
-
@@ -29005,102 +28695,102 @@ p, li { white-space: pre-wrap; }
GrassVector
-
0.1
- 0.1
+
GRASS layer
- طبقة GRASS
+
Plugins
-
Add GRASS raster layer
-
Open GRASS tools
-
Display Current Grass Region
-
Edit Current Grass Region
-
Edit Grass Vector layer
-
Open Mapset
-
New Mapset
-
Close Mapset
-
Add GRASS Vector Layer
-
Adds a GRASS vector layer to the map canvas
-
Adds a GRASS raster layer to the map canvas
-
Open GRASS Tools
-
Displays the current GRASS region as a rectangle on the map canvas
-
Edit the current GRASS region
-
Edit the currently selected GRASS vector layer.
-
Create New Grass Vector
-
&GRASS
-
GRASS
- GRASS
+
Warning
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
- لا يمكن فتح الطبقة الخطية % 1 في الخريطة % 2
+
Cannot open GRASS vector:
%1
-
GRASS Edit is already running.
-
New vector name
-
Cannot create new vector: %1
-
New vector created but cannot be opened by data provider.
-
Cannot start editing.
-
Cannot open vector for update.
-
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot open the mapset. %1
-
Cannot close mapset. %1
-
Cannot close current mapset. %1
-
Cannot open GRASS mapset. %1
-
@@ -29234,7 +28924,7 @@ p, li { white-space: pre-wrap; }
GRASS vector map %1 does not have topology. Build topology?
-
@@ -29242,22 +28932,22 @@ p, li { white-space: pre-wrap; }
cellhd file %1 does not exist
-
Groups not yet supported
-
Format not supported
-
Cannot read data
-
@@ -29267,22 +28957,22 @@ p, li { white-space: pre-wrap; }
Warning
-
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot write region
-
@@ -29290,78 +28980,78 @@ p, li { white-space: pre-wrap; }
GRASS Region Settings
-
Extent
- الامتداد
+
North
- الشمال
+
West
- الغرب
+
East
- الشرق
+
South
- الجنوب
+
Select the extent by dragging on canvas
or change the following values
-
Resolution
-
Cell width
-
Cell height
-
Columns
- الأعمدة
+
Rows
- الصفوف
+
Border
-
Color
-
Width
- عرض
+
@@ -29369,57 +29059,57 @@ or change the following values
Select GRASS Vector Layer
-
Select GRASS Raster Layer
-
Select GRASS mapcalc schema
-
Select GRASS Mapset
-
Choose existing GISDBASE
-
Wrong GISDBASE, no locations available.
-
Wrong GISDBASE
-
Select a map.
-
No map
-
No layer
-
No layers available in this map
-
@@ -29427,42 +29117,42 @@ or change the following values
Add GRASS Layer
-
Gisdbase
-
Location
-
Mapset
-
Map name
-
Select or type map name (wildcards '*' and '?' accepted for rasters)
-
Layer
- طبقة
+
Browse...
-
@@ -29470,24 +29160,24 @@ or change the following values
Ctrl+Shift+V
- Ctrl+Shift+V
+
Ctrl+Shift+C
- Ctrl+Shift+C
+
Warning
-
Cannot rename the lock file %1
-
@@ -29495,48 +29185,48 @@ or change the following values
GRASS Tools
-
GRASS Tools: %1/%2
-
GRASS Direct Tools
-
Modules Tree
-
Modules List
-
Browser
- متصفح
+
Direct Modules Tree
-
Direct Modules List
-
Cannot start command shell (%1)
-
Warning
-
GRASS Shell is not compiled.
-
The config file (%1) not found.
-
Cannot open config file (%1).
-
Cannot read config file (%1):
-
%1
at line %2 column %3
-
@@ -29579,39 +29269,39 @@ at line %2 column %3
Grass Tools
-
Modules Tree
-
1
- 1
+
Modules List
-
Filter
-
Direct Modules Tree
-
Direct Modules List
-
@@ -29619,60 +29309,60 @@ at line %2 column %3
Add feature
- إضافة الميزات
+
Start editing failed
-
Provider cannot be opened for editing
-
Stop editing
- ايقاف التحرير
+
Do you want to save the changes to layer %1?
-
Error
- خطأ
+
Problems during roll back
-
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
-
Show more
-
@@ -29680,72 +29370,65 @@ at line %2 column %3
Browse
- استعرض
+
Layer name
-
Type
- نوع
+
Provider
- موفر
+
Datasource
-
none
-
Select file to replace '%1'
-
Please select exactly one file.
-
Select new directory of selected files
-
All files (*)
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -29753,7 +29436,7 @@ at line %2 column %3
Handle bad layers
-
@@ -29761,12 +29444,12 @@ at line %2 column %3
Handle bad layers
-
%1 of %2 bad layers were not fixable.
-
@@ -29774,7 +29457,7 @@ at line %2 column %3
QGIS Help
-
@@ -29782,12 +29465,12 @@ at line %2 column %3
QGIS Help
-
about:blank
- حول: فارغة
+
@@ -29795,17 +29478,17 @@ at line %2 column %3
HTML annotation
-
Delete
- إلغاء
+
html
-
@@ -29813,76 +29496,69 @@ at line %2 column %3
WMS Server responded unexpectedly with HTTP Status Code %1 (%2)
-
Received %1 of %2 bytes
-
Received %1 bytes (total unknown)
-
HTTP response completed, however there was an error: %1
-
HTTP transaction completed, however there was an error: %1
-
Not connected
-
Looking up '%1'
-
Connecting to '%1'
-
Sending request '%1'
-
Receiving reply
-
Response is complete
-
Closing down connection
-
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
-
+
@@ -29890,12 +29566,12 @@ This may be a problem in your network connection or at the WMS server.
Dialog
- حوار
+
Distance coefficient P
-
@@ -29903,32 +29579,32 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Layer
- طبقة
+
FID
-
Attribute
-
Value
- قيمة
+
Expand tree.
-
...
- ...
+
Clear Results
-
Help
- مساعدة
+
Select identify mode
-
Mode
-
Select view mode for raster layers
-
View
- عرض
+
Auto open form
-
Collapse tree.
-
New results will be expanded by default.
-
Copy selected feature to clipboard.
-
Print selected HTML response.
-
@@ -30002,48 +29678,48 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Feature
-
Value
- قيمة
+
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
(Derived)
-
(Actions)
-
Edit feature form
-
View feature form
-
Table
- جدول
+
Tree
-
Graph
-
feature id
- معرف الميزة
+
Format
- التنسيق
+
No attributes.
-
Zoom to feature
-
Copy feature
-
Toggle feature selection
-
Copy attribute value
-
Copy feature attributes
-
Copy GetFeatureInfo request URL
-
Clear results
-
Clear highlights
-
Highlight all
-
Highlight layer
-
Activate layer
-
Layer properties...
-
Expand all
-
Collapse all
-
Attributes changed
-
Cannot print
-
Cannot print this item
-
@@ -30182,7 +29858,7 @@ This may be a problem in your network connection or at the WMS server.
Print
-
@@ -30190,7 +29866,7 @@ This may be a problem in your network connection or at the WMS server.
Loading...
-
@@ -30198,7 +29874,7 @@ This may be a problem in your network connection or at the WMS server.
Progress indication
-
@@ -30207,55 +29883,55 @@ This may be a problem in your network connection or at the WMS server.
Triangular interpolation (TIN)
-
Inverse Distance Weighting (IDW)
-
No input data for interpolation
-
Please add one or more input layers
-
Output file name invalid
-
Please enter a valid output file name
-
Break lines
-
Structure lines
-
Points
- نقاط
+
Save interpolated raster as...
-
@@ -30263,123 +29939,123 @@ This may be a problem in your network connection or at the WMS server.
Interpolation plugin
- برنامج المساعد الاستنتاج
+
Input
- إدخال
+
Vector layers
-
Interpolation attribute
-
Use z-Coordinate for interpolation
-
Add
-
Remove
- حذف
+
Vector layer
-
Attribute
-
Type
- نوع
+
Output
- المخرجات
+
Interpolation method
-
...
- ...
+
Number of columns
-
Number of rows
-
Cellsize X
-
Cellsize Y
-
X min
- X اﻷدنى
+
X max
- X الأقصى
+
Y min
- Y اﻷدنى
+
Y max
- Y الأقصى
+
Set to current extent
-
Output file
-
Add result to project
-
@@ -30389,7 +30065,7 @@ This may be a problem in your network connection or at the WMS server.
&Interpolation
-
@@ -30398,7 +30074,7 @@ This may be a problem in your network connection or at the WMS server.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -30406,17 +30082,17 @@ This may be a problem in your network connection or at the WMS server.
Form
- شكل
+
Sub renderer:
-
Merge polygons before rendering (slow)
-
@@ -30424,17 +30100,17 @@ This may be a problem in your network connection or at the WMS server.
Enter class bounds
-
Lower value
-
Upper value
-
@@ -30442,7 +30118,7 @@ This may be a problem in your network connection or at the WMS server.
Auto
-
@@ -30450,284 +30126,284 @@ This may be a problem in your network connection or at the WMS server.
Form1
-
Label Properties
-
Placement
-
Below Right
-
Right
- اليمين
+
Below
-
Over
-
Above
-
Left
- اليسار
+
Below Left
-
Above Right
-
Above Left
-
Use scale dependent rendering
-
Maximum
- الأقصى
+
Minimum
- الأدنى
+
Buffer labels
-
Buffer size
-
In points
-
In map units
-
Color
-
%
-
Transparency
-
Offset
-
X offset
-
Y offset
-
Basic label options
-
Field containing label
-
Default label
-
Font size
-
Angle (deg)
-
°
-
Font
-
Multiline labels?
-
Label only selected features
-
Advanced
- متقدم
+
Data defined placement
-
Data defined properties
-
&Font family
-
&Bold
-
&Italic
-
&Underline
-
&Size
-
Size units
-
&Color
-
Strikeout
-
Data defined buffer
-
Transparency:
-
Size:
-
Data defined position
-
X Coordinate
-
Y Coordinate
-
X Offset (pts)
-
Y Offset (pts)
-
Preview:
-
QGIS Rocks!
-
@@ -30735,17 +30411,17 @@ This may be a problem in your network connection or at the WMS server.
Expression result
-
Font color
-
Buffer color
-
@@ -30753,150 +30429,150 @@ This may be a problem in your network connection or at the WMS server.
Label properties
-
Text
-
Font
-
Available typeface styles
-
Size
- حجم
+
Style
- نمط
+
Underlined text
-
U
-
Strikeout text
-
S
- S
+
Bold text
(data defined only, overrides Style)
-
B
-
Italic text
(data defined only, overrides Style)
-
I
-
Display
- عرض
+
Scale-based
-
Min
-
Max
-
Show label
-
Ignores priority and permits collisions/overlaps
-
Always show (exceptions above)
-
Buffer
-
Position
-
Label distance
-
X Coordinate
-
Y Coordinate
-
Horizontal alignment
-
Vertical alignment
-
Rotation
-
@@ -30904,7 +30580,7 @@ This may be a problem in your network connection or at the WMS server.
points
-
map units
- وحدات الخريطة
+
mm
- مم
+
% of length
-
%1 not found. Default substituted.
-
Chosen font
-
string
-
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
-
int [0-2000]
-
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
-
int [1-10000]
-
Text/Buffer sample
-
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
No change
-
All uppercase
-
All lowercase
-
Capitalize first letter
-
Size%1
-
X
-
File not found
-
@@ -31071,12 +30747,12 @@ This may be a problem in your network connection or at the WMS server.
Layer labeling settings
-
- Label this layer with
-
...
- ...
+
Lorem Ipsum
-
Sample text
-
Reset sample text
-
Size for sample text in map units
-
Sample background color
-
Line direction symbol
-
Formatted numbers
-
Decimal places
-
Show plus sign
-
Multiple lines
-
- Automated placement settings (apply to all layers)
-
Text/Buffer Sample
-
Text
-
Formatting
-
Shadow
-
Rendering
-
letter
-
Spacing
- تباعد
+
Blend mode
-
word
-
Underlined text
-
Bold text
(data defined only, overrides Style)
-
B
-
Italic text
(data defined only, overrides Style)
-
I
-
Font is missing.
-
Text formatting
-
Wrap on character
-
Line height
-
Line height spacing for multi-line text
-
line
-
Alignment
- محاذاة
+
Paragraph style alignment of multi-line text
-
Left
- اليسار
+
Center
- الوسط
+
Right
- اليمين
+
Force point inside polygon
-
Repeat
-
- Discourage labels from covering features
-
Text style
-
Available typeface styles
-
U
-
Strikeout text
-
S
- S
+
Style
- نمط
+
Transparency
- شفافية
+
%
-
Capitalization style of text
-
Space in pixels or map units, relative to size unit choice
-
Type case
-
Font
-
Color
-
Size
- حجم
+
Buffer
-
- Labels will not show if larger than this on screen
-
-
- px
-
-
- Data defined
-
-
- X
- X
-
-
- Y
- Y
-
-
- Coordinate
-
-
- Preserve data rotation values
-
-
- horizontal
-
-
- vertical
-
-
- Label options
-
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
-
- Maximum
-
-
- Pixel size-based visibility (labels in map units)
-
Labels will not show if smaller than this on screen
- px
+
- Data defined
+
+
+ X
+
+
+ Y
+
+
+ Coordinate
+
+
+ Preserve data rotation values
+
+
+ horizontal
+
+
+ vertical
+
+
+ Label options
+
+
+ Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
+
+
+ Maximum
+
+
+ Pixel size-based visibility (labels in map units)
+
+
+ Labels will not show if smaller than this on screen
+
+
+ Minimum
-
<
-
- Scale-based visibility
-
>
-
Placement
-
left/right
-
above
-
below
-
Reverse direction
-
- Priority
-
- Low
-
- High
-
Around point
-
Offset from point
-
Parallel
-
Curved
-
Text buffer
-
Draw text buffer
-
Color buffer's fill
-
Draw background
-
Size X
-
Size type
-
Size Y
-
Fill color
-
Border color
-
Draw drop shadow
-
Blur radius
-
Blur only alpha pixels
-
Label's rotation is ignored
-
Use global shadow
-
˚
-
Lowest label component
-
Draw under
-
Horizontal
- أفقي
+
Offset from centroid
-
Around centroid
-
Horizontal (slow)
-
Free (slow)
-
Using perimeter
-
visible polygon
-
whole polygon
-
Rotation
-
Above line
-
On line
-
Below line
-
Line orientation dependent position
-
Centroid
-
abc
-
Quadrant
-
Distance
-
- outside
-
- inside
-
- Maximum angle between curved characters
-
Pen join style
-
Drop shadow
-
Offset
-
Scale
- مقياس
+
Background
- خلفية
+
Load symbol parameters
-
Fixed
-
Offset X,Y
-
Rectangle
- مستطيل
+
Square
-
Ellipse
- إهليج
+
Circle
-
SVG
- SVG
+
Shape
- شكل
+
Sync with label
-
Offset of label
-
Radius X,Y
-
Border width
-
symbol units
-
- Merge connected lines to avoid duplicate labels
-
- Label every part of multi-part features
-
- Feature options
-
- Suppress labeling of features smaller than
-
- mm
- مم
+
- Show all labels for this layer (including colliding labels)
-
- Show upside-down labels
-
- never
-
- when rotation defined
-
- always
-
- Limit number of features to be labeled to
-
- Number of features sent to labeling engine, though not all may be labeled
-
Position
-
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
-
- Show label
-
@@ -32012,21 +31688,21 @@ This may be a problem in your network connection or at the WMS server.
Outline: %1
-
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -32034,60 +31710,60 @@ not displayed
&Add Group
-
&Remove
- &حذف
+
&Show in overview
-
Re&name
- &إعادة تسمية
+
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
QgsLegendModel
- Group
- مجموعة
+
- No Legend Available
-
@@ -32096,33 +31772,33 @@ not displayed
Millimeter
-
Map unit
-
Angle
- زاوية
+
Distance
-
Line width
- سُمك الخط
+
Color
-
@@ -32130,23 +31806,23 @@ not displayed
Styles related to the layer
-
Other styles on the database
-
Cancel
- إالغاء
+
Load Style
-
@@ -32154,59 +31830,58 @@ not displayed
Select all
- إختيار الكل
+
Clear selection
-
Select connections to import
-
Import
-
Export
-
Export/import error
-
You should select at least one connection from list.
-
Save connections
-
XML files (*.xml *.XML)
-
Saving connections
-
Cannot write file %1:
%2.
- لا يمكن إنشاء الملف %1
-2%
+
Loading connections
-
Cannot read file %1:
%2.
- لا يمكن قراءة الملف %1
-2%
+
Parse error at line %1, column %2:
%3
- تحليل خطأ في السطر % 1: % 2
-3%
+
The file is not an WMS connections exchange file.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an PostGIS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Connection with name '%1' already exists. Overwrite?
-
@@ -32302,31 +31975,31 @@ not displayed
Manage connections
-
Select connections to export
-
QgsMapCanvas
- canvas
-
- Rendering
-
- Canvas refresh: %1 ms
-
@@ -32334,7 +32007,7 @@ not displayed
From map canvas
-
@@ -32342,27 +32015,27 @@ not displayed
Enter map coordinates
-
Enter X and Y coordinates (DMS (dd mm ss.ss), DD (dd.dd) or projected coordinates (mmmm.mm)) which correspond with the selected point on the image. Alternatively, click the button with icon of a pencil and then click a corresponding point on map canvas of QGIS to fill in coordinates of that point.
-
X / East:
-
Y / North:
-
Snap to background layers
-
@@ -32371,95 +32044,95 @@ not displayed
Specify CRS for layer %1
-
%1 at line %2 column %3
-
Error: qgis element could not be found in %1
-
Loading style file %1 failed because:
%2
-
Could not save symbology because:
%1
-
The directory containing your dataset needs to be writable!
-
Style not found in database
-
Created default style file as %1
-
ERROR: Failed to created default style file as %1. Check file permissions and retry.
-
User database could not be opened.
-
The style table could not be created.
-
The style %1 was saved to database
-
The style %1 was updated in the database.
-
The style %1 could not be updated in the database.
-
The style %1 could not be inserted into database.
-
ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
Unable to open file %1
-
@@ -32468,13 +32141,13 @@ not displayed
Transform error caught: %1
-
CRS
- CRS
+
@@ -32482,51 +32155,51 @@ not displayed
add feature
-
Layer cannot be added to
-
The data provider for this layer does not support the addition of features.
-
Wrong editing tool
-
Cannot apply the 'capture point' tool on this vector layer
-
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Cannot apply the 'capture line' tool on this vector layer
-
Cannot apply the 'capture polygon' tool on this vector layer
-
Error
- خطأ
+
Cannot add feature. Unknown WKB type
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
@@ -32570,53 +32243,53 @@ not displayed
No feature selected. Please select a feature with the selection tool or in the attribute table
-
Several features are selected. Please select only one feature to which an part should be added.
-
Part added
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected feature is not multi part.
-
New part's geometry is not valid.
-
New polygon ring not disjoint with existing polygons.
-
Several features are selected. Please select only one feature to which an island should be added.
-
Selected geometry could not be found
-
@@ -32624,52 +32297,52 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32677,12 +32350,12 @@ not displayed
Validation started.
-
Validation finished.
-
@@ -32690,7 +32363,7 @@ not displayed
Changed properties for label
-
@@ -32698,12 +32371,12 @@ not displayed
Part of multipart feature deleted
-
Couldn't remove the selected part.
-
@@ -32711,18 +32384,18 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
Ring deleted
-
@@ -32730,12 +32403,12 @@ not displayed
No active vector layer
- الطبقة النشطة مقفلة.
+
Layer not editable
- الطبقة لَيستْ قابل للتحرير
+
@@ -32743,27 +32416,27 @@ not displayed
No active vector layer
- الطبقة النشطة مقفلة.
+
To run an action, you must choose a vector layer by clicking on its name in the legend
-
No actions available
-
The active vector layer has no defined actions
-
No features at this position found.
-
@@ -32771,52 +32444,52 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added and filled
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32824,91 +32497,91 @@ not displayed
All (%1)
-
No active layer. To identify features, you must choose an active layer.
-
Identifying on %1...
-
Identifying done.
-
(clicked coordinate)
-
feature id
- معرف الميزة
+
new feature
-
Length
- طول
+
firstX
attributes get sorted; translation for lastX should be lexically larger than this one
-
firstY
-
lastX
attributes get sorted; translation for firstX should be lexically smaller than this one
-
lastY
-
Area
- المنطقة
+
Perimeter
-
no data
-
Error
- خطأ
+
Identify error
-
@@ -32916,7 +32589,7 @@ not displayed
No features at this position found.
-
@@ -32924,7 +32597,7 @@ not displayed
Feature moved
-
@@ -32932,7 +32605,7 @@ not displayed
Moved label
-
@@ -32940,12 +32613,12 @@ not displayed
could not snap to a segment on the current layer.
-
Inserted vertex
-
@@ -32953,22 +32626,22 @@ not displayed
Offset curve
-
Offset:
-
Geometry error
-
Creating offset geometry failed
-
@@ -32976,12 +32649,12 @@ not displayed
Pinned label
-
Unpinned label
-
@@ -32989,17 +32662,17 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Reshape
-
@@ -33007,7 +32680,7 @@ not displayed
Features Rotated
-
@@ -33015,7 +32688,7 @@ not displayed
Rotated label
-
@@ -33023,27 +32696,27 @@ not displayed
No point feature
-
No point feature was detected at the clicked position. Please click closer to the feature or enhance the search tolerance under Settings->Options->Digitizing->Serch radius for vertex edits
-
No rotation Attributes
-
The active point layer does not have a rotation attribute
-
Rotate symbol
-
@@ -33051,12 +32724,12 @@ not displayed
Hid labels
-
Showed labels
-
@@ -33064,23 +32737,23 @@ not displayed
Geometry simplified
-
Unsupported operation
-
Multipart features are not supported for simplification.
-
This feature cannot be simplified. Check if feature has enough vertices to be simplified.
-
@@ -33088,49 +32761,49 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Features split
-
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
No feature split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
@@ -33138,53 +32811,53 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Split error
-
@@ -33192,22 +32865,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
@@ -33217,39 +32890,39 @@ not displayed
Millimeter
-
Map unit
-
Interval
- فاصل
+
Line offset
-
Placement
-
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -33257,17 +32930,17 @@ not displayed
Measure
- قياس
+
Total
-
Segments
- قطع
+
@@ -33275,67 +32948,67 @@ not displayed
&New
-
The calculations are based on:
-
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
@@ -33343,12 +33016,12 @@ not displayed
Incorrect measure results
-
<p>This map is defined with a geographic coordinate system (latitude/longitude) but the map extents suggests that it is actually a projected coordinate system (e.g., Mercator). If so, the results from line or area measurements will be incorrect.</p><p>To fix this, explicitly set an appropriate map coordinate system using the <tt>Settings:Project Properties</tt> menu.
-
@@ -33356,58 +33029,58 @@ not displayed
Whole number (integer)
-
Decimal number (real)
-
Text (string)
-
Date
-
Whole number (smallint - 16bit)
-
Whole number (integer - 32bit)
-
Whole number (integer - 64bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (double)
-
Text, unlimited length (text)
-
@@ -33415,57 +33088,57 @@ not displayed
Skip attribute
-
Id
- معرف
+
Merge
- دمج
+
Feature %1
-
Minimum
- الأدنى
+
Maximum
- الأقصى
+
Median
- العدد الأوسط
+
Sum
- المجموع
+
Concatenation
-
Mean
- المتوسط
+
Skipped
-
@@ -33473,17 +33146,17 @@ not displayed
Merge feature attributes
-
Take attributes from selected feature
-
Remove feature from selection
-
@@ -33491,30 +33164,23 @@ not displayed
Remaining messages
-
Close all
-
Close
- إغلاق
+
%n more
unread messages
-
-
+
@@ -33522,38 +33188,38 @@ not displayed
QGIS Log
-
No messages.
-
%1 message(s) logged.
-
General
-
Timestamp
-
Message
-
Level
-
@@ -33561,12 +33227,12 @@ not displayed
QGIS Message
-
Don't show this message again
- لا تظهر هذه الرسالة مرة أخرى
+
@@ -33574,46 +33240,46 @@ not displayed
Show non-spatial tables
-
Edit...
-
Delete
- إلغاء
+
%1: Not a vector layer!
-
%1: OK!
-
Import to MSSQL database
-
Failed to import some layers!
-
Import was successful.
-
@@ -33621,23 +33287,23 @@ not displayed
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
-
Should the existing connection %1 be overwritten?
-
Test connection
-
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
-
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
-
Connection to %1 was successful
-
@@ -33672,82 +33338,82 @@ not displayed
Create a New MSSQL connection
-
Connection Information
-
Name
-
Provider/DSN
-
Host
-
Database
-
Username
- إسم المستخدم
+
Password
- كلمة السر
+
Name of the new connection
- اسم الاتصال الجديد
+
Trusted Connection
-
Save Username
-
&Test Connect
-
Save Password
- حفظ كلمة السر
+
Only look in the geometry_columns metadata table
-
Also list tables with no geometry
-
Use estimated table parameters
-
@@ -33755,72 +33421,72 @@ not displayed
8 Bytes integer
-
4 Bytes integer
-
2 Bytes integer
-
1 Bytes integer
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length (text)
-
Text, unlimited length unicode (ntext)
-
@@ -33828,7 +33494,7 @@ not displayed
New Connection...
-
@@ -33836,12 +33502,12 @@ not displayed
%1 as %2 in %3
-
as geometryless table
-
@@ -33849,128 +33515,128 @@ not displayed
Add MSSQL Table(s)
-
&Add
- &أضف
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Schema
-
Table
- جدول
+
Type
- نوع
+
Geometry column
- عمود هندسي
+
Primary key column
-
SRID
- SRID
+
Sql
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
MSSQL Provider
-
Stop
-
Connect
-
@@ -33978,7 +33644,7 @@ not displayed
Select...
- إختيار...
+
@@ -33986,47 +33652,47 @@ not displayed
Schema
-
Table
- جدول
+
Type
- نوع
+
Geometry column
- عمود هندسي
+
SRID
- SRID
+
Primary key column
-
Select at id
-
Sql
-
Detecting...
-
Select...
- إختيار...
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Enter...
-
Point
- نقاط
+
Multipoint
-
Line
- خطوط
+
Multiline
-
Polygon
- مضلعات
+
Multipolygon
-
No Geometry
-
Unknown Geometry
-
@@ -34094,42 +33760,42 @@ not displayed
Not set
-
No enhancement
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
Red
-
Green
-
Blue
-
@@ -34137,35 +33803,35 @@ not displayed
Form
- شكل
+
Contrast
enhancement
-
Min/max
-
Red band
-
Green band
-
Blue band
-
@@ -34173,12 +33839,12 @@ enhancement
Network request %1 timed out
-
Network
-
@@ -34186,7 +33852,7 @@ enhancement
Cannot find boundary in multipart content type
-
@@ -34194,63 +33860,63 @@ enhancement
Create a new %1 connection
-
all
-
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
Save connection
-
Should the existing connection %1 be overwritten?
-
Saving passwords
-
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
@@ -34258,82 +33924,82 @@ Note: giving the password is optional. It will be requested interactivly, when n
Create a new WMS connection
-
Connection details
-
DPI-Mode
-
URL
- الرابط
+
If the service requires basic authentication, enter a user name and optional password
-
Password
- كلمة السر
+
&User name
-
Name
-
Name of the new connection
- اسم الاتصال الجديد
+
HTTP address of the Web Map Server
-
Ignore GetFeatureInfo URI reported in capabilities
-
Ignore GetMap/GetTile URI reported in capabilities
-
Ignore axis orientation (WMS 1.3/WMTS)
-
Invert axis orientation
-
Smooth pixmap transform
-
Referer
-
@@ -34342,7 +34008,7 @@ Note: giving the password is optional. It will be requested interactivly, when n
Test connection
-
Connection to %1 was successful
-
Save connection
-
Should the existing connection %1 be overwritten?
-
@@ -34373,62 +34039,62 @@ Extended error information:
Create a New OGR Database connection
-
Connection Information
-
Type
- نوع
+
Name
-
Name of the new connection
- اسم الاتصال الجديد
+
Host
-
Database
-
Port
-
Username
- إسم المستخدم
+
Password
- كلمة السر
+
Save Password
- حفظ كلمة السر
+
&Test Connect
-
@@ -34436,27 +34102,27 @@ Extended error information:
Text data
-
Whole number
-
Decimal number
-
New SpatiaLite Database File
-
SpatiaLite
- SpatiaLite
+
SpatiaLite Database
-
Unable to open the database
-
Error
- خطأ
+
Failed to load SRIDS: %1
-
@
-
Registered new database!
-
Unable to open the database: %1
-
Error Creating SpatiaLite Table
-
Failed to create the SpatiaLite table %1. The database returned:
%2
-
Error Creating Geometry Column
-
Failed to create the geometry column. The database returned:
%1
-
Error Creating Spatial Index
-
Failed to create the spatial index. The database returned:
%1
-
Invalid Layer
- الطبقة الصحيحة
+
%1 is an invalid layer and cannot be loaded.
-
@@ -34545,147 +34211,147 @@ Extended error information:
New Spatialite Layer
-
Database
-
Create a new Spatialite database
-
...
- ...
+
Layer name
-
Name for the new layer
-
Geometry column
- عمود هندسي
+
geometry
-
Type
- نوع
+
Point
- نقاط
+
Line
- خطوط
+
Polygon
- مضلعات
+
MultiPoint
-
Multiline
-
Multipolygon
-
Spatial Reference Id
-
Specify the coordinate reference system of the layer's geometry.
-
Specify CRS
-
Add an integer id field as the primary key for the new layer
-
Create an autoincrementing primary key
-
New attribute
-
Name
-
An attribute name
-
Add attribute to list
-
Add to attributes list
-
Attributes list
-
Delete selected attribute
-
Remove attribute
-
@@ -34693,48 +34359,48 @@ Extended error information:
Text data
-
Whole number
-
Decimal number
-
Date
-
ESRI Shapefile
- ESRI شيب فايل
+
Comma Separated Value
- القيمة المفصولة بفواصل
+
GML
-
Mapinfo File
- ملف Mapinfo
+
Save layer as...
-
@@ -34742,98 +34408,98 @@ Extended error information:
New Vector Layer
-
File format
-
Type
- نوع
+
Point
- نقاط
+
Line
- خطوط
+
Polygon
- مضلعات
+
New attribute
-
Name
-
Width
- عرض
+
Precision
- دقة
+
Add attribute to list
-
Add to attributes list
-
Attributes list
-
Delete selected attribute
-
Remove attribute
-
Specify the coordinate reference system of the layer's geometry.
-
Specify CRS
-
File encoding
-
@@ -34841,17 +34507,17 @@ Extended error information:
No query has been specified.
-
There is already a pending request for data.
-
Cannot open output file: %1
-
@@ -34859,47 +34525,47 @@ Extended error information:
Download OpenStreetMap data
-
Extent
- الامتداد
+
From map canvas
-
From layer
-
Manual
-
Output file
- ملف الإخراج
+
...
- ...
+
OpenStreetMap files (*.osm)
-
Download error
-
OpenStreetMap download
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -34942,95 +34608,95 @@ Extended error information:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
...
- ...
+
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Polygons (closed ways)
-
Output layer name
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
- &تحميل إلى لوحة عند الانتهاء
+
Tag
-
Count
- عدد
+
SQLite databases (*.db)
-
Unable to open database:
%1
-
OpenStreetMap export
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -35038,66 +34704,66 @@ Extended error information:
OpenStreetMap Import
-
Input XML file (.osm)
-
...
- ...
+
Output SpatiaLite DB file
-
Create connection (SpatiaLite) after import
-
Connection name
-
OpenStreetMap files (*.osm)
-
SQLite databases (*.db)
-
OpenStreetMap import
-
Output database file exists already. Overwrite?
-
Failed to import OSM data:
%1
-
Import has been successful.
-
@@ -35105,12 +34771,12 @@ Extended error information:
WMS Password for %1
-
Password
- كلمة السر
+
@@ -35118,12 +34784,12 @@ Extended error information:
Edit...
-
Delete
- إلغاء
+
@@ -35131,7 +34797,7 @@ Extended error information:
New Connection...
-
@@ -35139,101 +34805,94 @@ Extended error information:
Add Layer(s) from a %1 Server
-
&Add
- &أضف
+
Add selected layers to map
-
Always cache
-
Prefer cache
-
Prefer network
-
Always network
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Load connections
-
XML files (*.xml *XML)
-
Coordinate Reference System (%n available)
crs count
-
-
+
Coordinate Reference System
-
Could not understand the response:
%1
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
@@ -35241,140 +34900,140 @@ Extended error information:
Add Layer(s) from a Server
-
Ready
- الجاهز
+
Layers
- طبقات
+
C&onnect
-
&New
-
Edit
- تعديل
+
Delete
- إلغاء
+
Load connections from file
-
Load
-
Save connections to file
-
Save
- احفظ
+
Adds a few example WMS servers
-
Add default servers
-
ID
- المعرف
+
Name
-
Title
- عنوان
+
Abstract
-
Time
-
Coordinate Reference System:
-
Selected Coordinate Reference System
-
Change ...
-
Format
- التنسيق
+
Options
-
Layer name
-
Tile size
-
Feature limit for GetFeatureInfo
-
Cache
- تخزين مؤقت
+
Layer Order
-
Move selected layer UP
-
Up
- أعلى
+
Move selected layer DOWN
-
Down
- أسفل
+
Layer
- طبقة
+
Style
- نمط
+
Tilesets
-
Styles
-
Size
- حجم
+
CRS
- CRS
+
Server Search
-
Search
-
Description
- الوصف
+
URL
- الرابط
+
Add selected row to WMS list
-
@@ -35476,46 +35135,44 @@ Always network: always load from network and do not check if the cache has a val
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
- غير قادر على التهيئة SpatialMetadata:
-
+
Could not create a new database
- لا يمكن إنشاء قاعدة بيانات جديدة
-
+
Unable to activate FOREIGN_KEY constraints
-
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Offline Editing Plugin
-
Could not open the spatialite logging database
-
@@ -35523,12 +35180,12 @@ Always network: always load from network and do not check if the cache has a val
Convert to offline project
-
Create offline copies of selected layers and save as offline project
-
&Offline Editing
-
Synchronize
-
Synchronize offline project with remote layers
-
Converting to offline project
-
Synchronizing to remote layers
-
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -35599,32 +35256,32 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
-
SpatiaLite DB
-
All files
- جميع الملفات
+
Offline Editing Plugin
-
Converting to offline project.
-
Offline database file '%1' exists. Overwrite?
-
@@ -35632,27 +35289,27 @@ Always network: always load from network and do not check if the cache has a val
Create offline project
-
Offline data
-
Browse...
-
Select remote layers
-
Show only editable layers
-
@@ -35660,7 +35317,7 @@ Always network: always load from network and do not check if the cache has a val
Layer %1 of %2..
-
@@ -35668,12 +35325,12 @@ Always network: always load from network and do not check if the cache has a val
Dialog
- حوار
+
TextLabel
- تسمية نصية
+
@@ -35681,18 +35338,18 @@ Always network: always load from network and do not check if the cache has a val
Couldn't open file %1.prj
-
OGR
- OGR
+
Couldn't open file %1.qpj
-
@@ -35700,7 +35357,7 @@ Always network: always load from network and do not check if the cache has a val
Data source is invalid, no layer found (%1)
-
OGR
- OGR
+
Data source is invalid (%1)
-
Whole number (integer)
-
Decimal number (real)
-
Text (string)
-
Date
-
Date & Time
-
OGR[%1] error %2: %3
- OGR[%1] error %2: %3
+
Unknown
-
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
type %1 for field %2 not found
-
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
Feature %1 for attribute update not found.
-
Field %1 of feature %2 doesn't exist.
-
Type %1 of attribute %2 of feature %3 unknown.
-
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
Shapefiles without attribute are considered read-only.
-
@@ -35875,51 +35532,51 @@ Always network: always load from network and do not check if the cache has a val
Open raster
-
Raster file:
-
...
- ...
+
Save raster as:
-
Choose a name of the raster
-
Error
- خطأ
+
The selected file is not a valid raster file.
-
Choose a name for the modified raster
-
-modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -35927,22 +35584,22 @@ Always network: always load from network and do not check if the cache has a val
Open an OGR Supported Vector Layer
-
Open Directory
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Add vector layer
-
No database selected.
-
Password for
-
Please enter your password:
-
No protocol URI entered.
-
No layers selected.
-
No directory selected.
-
@@ -35988,86 +35645,86 @@ Always network: always load from network and do not check if the cache has a val
Add vector layer
-
Source type
-
File
- ملف
+
Directory
-
Database
-
Protocol
-
Encoding
- ترميز
+
Type
- نوع
+
URI
-
Source
- مصدر
+
Dataset
-
Browse
- استعرض
+
Connections
-
New
- جديد
+
Edit
- تعديل
+
Delete
- إلغاء
+
@@ -36075,12 +35732,12 @@ Always network: always load from network and do not check if the cache has a val
Options Dialog Template
-
GroupBox
-
@@ -36088,345 +35745,345 @@ Always network: always load from network and do not check if the cache has a val
Identify highlight color
-
not present
-
System value: %1
-
Show all features
-
Show selected features
-
Always
-
If needed
-
Never
-
Load all
-
Check file contents
-
Check extension
-
No
-
Basic scan
-
Full scan
-
Cumulative pixel count cut
-
Minimum / maximum
-
Mean +/- standard deviation
-
Select grid color
- حدد لون الشبكة
+
Solid
- صلب
+
Dots
-
Crosses
- مُتصالب
+
- Detected active locale on your system: %1
-
-
- To vertex
-
-
- To segment
-
-
- To vertex and segment
-
-
- map units
- وحدات الخريطة
-
-
- pixels
-
-
- Semi transparent circle
-
-
- Cross
- تقاطع
-
-
- None
- لا شيء
-
-
- QGIS files
-
Off
- To vertex
+
- QGIS
- QGIS
+ To segment
+
+
+ To vertex and segment
+
+
+ map units
+
+
+ pixels
+
+
+ Semi transparent circle
+
+
+ Cross
+
+
+ None
+
+
+ QGIS files
+
+
+ Off
+
QGIS
+
+
+ GEOS
- GEOS
+
- Round
-
- Mitre
-
- Bevel
-
- Save default project
-
- You must set a default project
-
- Current project saved as default
-
- Error saving current project as default
-
- Choose a directory to store project template files
-
Selection color
-
Show features visible on map
-
- Choose project file to open at launch
-
- Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
-
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
-
- If Undefined
-
- Unset
-
- Prepend
-
- Append
-
- Choose a directory
-
- Enter scale
-
- Scale denominator
-
- Load scales
-
- XML files (*.xml *.XML)
-
- Save scales
-
- No Stretch
-
- Stretch To MinMax
-
- Stretch And Clip To MinMax
-
- Clip To MinMax
-
None / Planimetric
-
@@ -36434,186 +36091,186 @@ Always network: always load from network and do not check if the cache has a val
Options
-
General
-
System
-
Data Sources
-
Data sources
-
Rendering
-
Canvas & Legend
-
Canvas and legend
-
Map Tools
-
Map tools
-
Digitizing
- الترقيم
+
GDAL
-
CRS
- CRS
+
Locale
-
Network
-
Application
-
Style <i>(QGIS restart required)</i>
-
Icon theme
-
Icon size
-
16
- 16
+
24
- 24
+
32
- 32
+
Font
-
Qt default
-
Size
- حجم
+
Timeout for timed messages or dialogs
-
s
-
Hide splash screen at startup
-
Show tips at start up
-
Bold group box titles
-
QGIS-styled group boxes
-
Project files
-
New
- جديد
+
Most recent
-
Specific
- نوْعي
+
...
- ...
+
Open project on launch
-
Create new project from default project
-
Set current project as default
-
Reset default
-
Template folder
-
Browse
- استعرض
+
Reset
- إعادة ضبط
+
Prompt to save project and data source changes when required
-
Prompt for confirmation when a layer is to be removed
-
Warn when opening a project file saved with an older version of QGIS
-
Enable macros
-
Never
-
Ask
-
For this session only
-
Always (not recommended)
-
QSettings
-
Reset the User Interface settings, to reset QGIS to it's default view
-
Environment
-
Apply
-
Variable
-
Value
- قيمة
+
Remove
- حذف
+
Add
-
Current environment variables (read-only - bold indicates modified at startup)
-
Show only QGIS-specific variables
-
Use custom variables (restart required - include separators)
-
Plugin paths
-
Path(s) to search for additional C++ plugins libraries
-
SVG paths
-
Path(s) to search for Scalable Vector Graphic (SVG) symbols
-
Feature attributes and table
-
Open attribute table in a dock window (QGIS restart required)
-
Copy geometry in WKT representation from attribute table
-
Attribute table behaviour
-
Attribute table row cache
-
Representation for NULL values
-
Data source handling
-
Scan for valid items in the browser dock
-
Scan for contents of compressed files (.zip) in browser dock
-
Prompt for raster sublayers when opening
-
Add PostGIS layers with double click and select in extended mode
-
Rendering behavior
-
By default new la&yers added to the map should be displayed
-
Use render caching where possible to speed up redraws
-
Render layers in parallel using many CPU cores
-
Max cores to use:
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Rendering quality
-
Make lines appear less jagged at the expense of some drawing performance
-
Rasters
-
RGB band selection
-
Red band
-
Green band
-
Blue band
-
Contrast enhancement
-
Single band gray
-
Multi band color (byte / band)
-
Multi band color (> byte / band)
-
Limits (minimum/maximum)
-
Cumulative pixel count cut limits
-
-
-
%
-
Standard deviation multiplier
-
Debugging
-
Show these events in the Log Message panel (under Rendering tab)
-
Map canvas refresh
-
Default map appearance (overridden by project properties)
-
Selection color
-
Highlight color
-
<html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
Buffer
-
Lines / outlines buffer in millimeters.
-
Minimum width
-
Minimum line / outline width in millimeters.
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
-
-
- Suppress attribute form pop-up after feature creation
-
Background color
- لون الخلفية
+
Use live-updating color chooser dialogs
-
Ignore shapefile encoding declaration
-
Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
Composer
- مكوُن
+
Custom side bar style
-
Add Oracle layers with double click and select in extended mode
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
Simplify on provider side if possible
-
Layer legend
-
Double click action in legend
-
Open layer properties
-
Open attribute table
-
Capitalise layer names
-
Bold layer names
-
Display classification attribute names
-
Bold group names
-
Create raster icons (may be slow)
-
Legend item styles
-
WMS getLegendGraphic Resolution
-
Identify
-
<b>Note:</b> Specify the search radius as a percentage of the map width
-
Search radius for identifying features and displaying map tips
-
Measure tool
-
Rubberband color
-
Preferred measurements units
-
Meters
- أمتار
+
Feet
- قدم
+
Nautical Miles
-
Preferred angle units
-
Degrees
-
Map update interval
-
ms
-
Enable feature simplification by default for newly added layers
-
Radians
-
Decimal places
-
Keep base unit
-
Gon
-
Panning and zooming
-
Zoom factor
-
Mouse wheel action
-
Zoom
- تكبير
+
Zoom and recenter
-
Zoom to mouse cursor
-
Nothing
-
Predefined scales
-
Add predefined scale
-
Remove selected
-
Insert default scales
-
Import from file
-
Export to file
-
Composition defaults
-
Default font
-
Grid appearance
-
Grid style
-
Color...
-
+
+ Grid defaults
+
+
+ Spacing
+
mm
- مم
+
Grid offset
- انحراف الشبكة
+
x:
- x:
+
y:
- y:
+
Snap tolerance
-
- Guide defaults
+
+
+ Feature creation
-
- Validate geometries
-
- Reuse last entered attribute values
-
- Rubberband
-
- Line color
-
- Line width in pixels
-
- Line width
- سُمك الخط
+
- Snapping
-
- Default snap mode
-
- Default snapping tolerance
-
- Search radius for vertex edits
-
- map units
- وحدات الخريطة
+
pixels
-
- Open snapping options in a dock window (QGIS restart required)
-
- Vertex markers
-
- Marker style
-
- Marker size
-
- Show markers only for selected features
-
-
- Curve offset tool
-
-
- Miter limit
-
-
- Join style
-
Curve offset tool
+
+
+ Miter limit
+
+
+ Join style
+
+
+ Quadrant segments
-
- GDAL driver options
-
- Edit Pyramids Options
-
-
- Edit Create Options
-
-
- GDAL drivers
-
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
-
Name
-
-
- ext
- Edit Create Options
+
GDAL drivers
+
+
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+
+
+ Name
+
+
+ ext
+
+
+ Flags
-
- Description
- الوصف
+
- CRS for new layers
-
- Select...
- إختيار...
+
- Use &project CRS
-
- Prompt for &CRS
-
- Use default CRS displa&yed below
-
- When a new layer is created, or when a layer is loaded that has no CRS
-
- Default CRS for new projects
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
- Always start new projects with this CRS
-
- Enable 'on the &fly' reprojection by default
-
- Don't enable 'on the fly' reprojection
-
- Default datum transformations
-
- Source CRS
-
- Destination CRS
-
- Source datum transform
-
- Destination datum transform
-
- Ask for datum transformation when no default is defined
-
- Override system locale
-
- Locale to use instead
-
- <b>Note:</b> Enabling / changing overide on local requires an application restart
-
- Additional Info
-
- Detected active locale on your system:
-
- WMS search address
-
- Timeout for network requests (ms)
-
- Default expiration period for WMS-C/WMTS tiles (hours)
-
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
Cache settings
- Max retry in case of tile request errors
+
- Directory
-
-
- Size [KiB]
- User-Agent
+
Cache settings
+
+
+ Directory
+
+
+ Size [KiB]
+
+
+ Clear
- إزالة
+
- Use proxy for web access
-
- Host
-
- Port
-
- User
-
-
- Leave this blank if no proxy username / password are required
-
-
- Password
- كلمة السر
-
-
- Proxy type
-
+ Leave this blank if no proxy username / password are required
+
+
+ Password
+
+
+ Proxy type
+
+
+ Exclude URLs (starting with)
-
@@ -37711,7 +37371,7 @@ Always network: always load from network and do not check if the cache has a val
Missing objects
-
@@ -37727,17 +37387,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -37745,7 +37405,7 @@ Missing some of the .ui template objects:
Connection to database failed
-
Oracle
- أوراكل
+
SQL:%1
error:%2
-
Database connection was successful, but the accessible tables could not be determined.
-
Unable to get list of spatially enabled tables from the database
-
Unsupported geometry type %1 in %2.%3.%4 ignored
-
View %1.%2 doesn't have integer columns for use as keys.
-
Point
- نقاط
+
Multipoint
-
Line
- خطوط
+
Multiline
-
Polygon
- مضلعات
+
Multipolygon
-
No Geometry
-
Unknown Geometry
-
@@ -37841,61 +37501,61 @@ error:%2
Edit...
-
Delete
- إلغاء
+
Refresh
- أنعشْ
+
Copying features...
-
Abort
- إجهاض
+
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to Oracle database
-
Failed to import some layers!
-
Import was successful.
-
@@ -37905,12 +37565,12 @@ error:%2
Delete layer
-
Layer deleted successfully.
-
@@ -37918,41 +37578,41 @@ error:%2
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
-
Should the existing connection %1 be overwritten?
-
Test connection
-
Connection to %1 was successful
-
Connection failed - Check settings and try again.
-
@@ -37960,128 +37620,128 @@ error:%2
Create a New Oracle connection
-
Connection Information
-
Password
- كلمة السر
+
Save Username
-
Username
- إسم المستخدم
+
Name of the new connection
- اسم الاتصال الجديد
+
Database
-
Name
-
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
Also list tables with no geometry
-
Port
-
1521
- 1521
+
&Test Connect
-
Save Password
- حفظ كلمة السر
+
Host
-
Use estimated table statistics for the layer metadata.
-
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Use estimated table metadata
-
@@ -38089,12 +37749,12 @@ error:%2
%1 as %2 in %3
-
as geometryless table
-
@@ -38102,12 +37762,12 @@ error:%2
Add Oracle GeoRaster Layer...
-
Add a Oracle Spatial GeoRaster...
-
@@ -38115,52 +37775,52 @@ error:%2
Whole number
-
Whole big number
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
- أوراكل
+
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
-
Primary key field %1 not found in %2
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
No key field for query given.
-
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -38604,7 +38264,7 @@ Error: %2
New Connection...
-
@@ -38612,32 +38272,32 @@ Error: %2
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Password for %1/<password>@%2
-
Please enter your password:
-
Open failed
-
The connection to %1 failed. Please verify your connection parameters. Make sure you have the GDAL GeoRaster plugin installed.
-
@@ -38645,122 +38305,122 @@ Error: %2
Add Oracle Table(s)
-
&Add
- &أضف
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Owner
-
Table
- جدول
+
Type
- نوع
+
Geometry column
- عمود هندسي
+
Primary key column
-
SRID
- SRID
+
Sql
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
Stop
-
Connect
-
@@ -38769,12 +38429,12 @@ Error: %2
Select...
- إختيار...
+
Enter...
-
@@ -38782,76 +38442,76 @@ Error: %2
Owner
-
Table
- جدول
+
Type
- نوع
+
Geometry column
- عمود هندسي
+
SRID
- SRID
+
Primary key column
-
Select at id
-
Sql
-
Specify a geometry type
-
Enter a SRID
-
Select a primary key
-
Select...
- إختيار...
+
Enter...
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -38859,61 +38519,61 @@ Error: %2
Edit...
-
Delete
- إلغاء
+
Refresh
- أنعشْ
+
Copying features...
-
Abort
- إجهاض
+
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to PostGIS database
-
Failed to import some layers!
-
Import was successful.
-
@@ -38923,12 +38583,12 @@ Error: %2
Delete layer
-
Layer deleted successfully.
-
@@ -38936,7 +38596,7 @@ Error: %2
New Connection...
-
@@ -38944,12 +38604,12 @@ Error: %2
%1 as %2 in %3
-
as geometryless table
-
@@ -38957,27 +38617,27 @@ Error: %2
Form
- شكل
+
Band
-
Value
- قيمة
+
Color
-
Label
- رمز
+
@@ -38985,22 +38645,22 @@ Error: %2
Paste Transformations
-
<b>Note: This function is not useful yet!</b>
-
Source
- مصدر
+
Destination
-
@@ -39008,17 +38668,17 @@ Error: %2
Square
-
Flat
-
Round
-
@@ -39026,17 +38686,17 @@ Error: %2
Bevel
-
Miter
-
Round
-
@@ -39044,32 +38704,32 @@ Error: %2
Solid Line
-
No Pen
-
Dash Line
-
Dot Line
-
Dash Dot Line
-
Dash Dot Dot Line
-
@@ -39077,61 +38737,61 @@ Error: %2
disable
-
allow
-
prefer
-
require
-
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
-
Should the existing connection %1 be overwritten?
-
Test connection
-
Connection to %1 was successful
-
Connection failed - Check settings and try again.
-
@@ -39139,114 +38799,114 @@ Error: %2
Create a New PostGIS connection
-
Connection Information
-
Name
-
Service
-
Host
-
Port
-
Database
-
SSL mode
-
Username
- إسم المستخدم
+
Password
- كلمة السر
+
Name of the new connection
- اسم الاتصال الجديد
+
5432
- 5432
+
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
Only show layers in the layer registries
-
Restrict the search to the public schema for spatial tables not in the geometry_columns table
-
When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
-
Only look in the 'public' schema
-
Save Username
-
&Test Connect
-
Save Password
- حفظ كلمة السر
+
Use estimated table statistics for the layer metadata.
-
Use estimated table metadata
-
Also list tables with no geometry
-
Don't resolve type of unrestricted columns (GEOMETRY)
-
@@ -39282,122 +38942,122 @@ Error: %2
Add PostGIS Table(s)
-
&Add
- &أضف
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Schema
-
Table
- جدول
+
Type
- نوع
+
Geometry column
- عمود هندسي
+
Primary key column
-
SRID
- SRID
+
Sql
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
Stop
-
Connect
-
@@ -39406,12 +39066,12 @@ Error: %2
Select...
- إختيار...
+
Enter...
-
@@ -39419,79 +39079,79 @@ Error: %2
Schema
-
Table
- جدول
+
Column
- عمود
+
Data Type
-
Spatial Type
-
SRID
- SRID
+
Primary Key
-
Select at id
-
Sql
-
Select a primary key
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Select...
- إختيار...
+
Specify a geometry type
-
Enter a SRID
-
Enter...
-
@@ -39499,32 +39159,32 @@ Error: %2
Form
- شكل
+
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- عرض
+
Height
- ارتفاع
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39532,208 +39192,208 @@ Error: %2
Select a picture
-
...
- ...
+
QgsPluginInstaller
Looking for new plugins...
-
There is a new plugin available
-
There is a plugin update available
-
QGIS Python Plugin Installer
-
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
-
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
-
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
-
Plugin installation failed
-
Plugin has disappeared
-
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
-
Plugin installed successfully
-
Plugin reinstalled successfully
-
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
-
The plugin is broken. Python said:
-
Plugin uninstall failed
-
Are you sure you want to uninstall the following plugin?
-
Warning: this plugin isn't available in any accessible repository!
-
Plugin uninstalled successfully
-
Unable to add another repository with the same URL!
-
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
-
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
QGIS Official Plugin Repository
-
Nothing to remove! Plugin directory doesn't exist:
-
Failed to remove the directory:
-
Check permissions or remove it manually
-
QgsPluginInstallerFetchingDialog
Success
-
Resolving host name...
-
Connecting...
-
Host connected. Sending request...
-
Downloading data...
-
Idle
-
Closing connection...
-
Error
- خطأ
+
@@ -39741,70 +39401,70 @@ You need to restart QGIS in order to reload it.
Fetching repositories
-
Overall progress:
-
Abort fetching
-
Repository
-
State
-
QgsPluginInstallerInstallingDialog
Installing...
-
Resolving host name...
-
Connecting...
-
Host connected. Sending request...
-
Downloading data...
-
Idle
-
Closing connection...
-
Error
- خطأ
+
Failed to unzip the plugin package. Probably it's broken or missing from the repository. You may also want to make sure that you have write permission to the plugin directory:
-
Aborted by user
-
@@ -39812,24 +39472,24 @@ You need to restart QGIS in order to reload it.
QGIS Python Plugin Installer
-
Installing plugin:
-
Connecting...
-
QgsPluginInstallerPluginErrorDialog
no error message received
-
@@ -39837,17 +39497,17 @@ You need to restart QGIS in order to reload it.
Error loading plugin
-
The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below:
-
Do you want to uninstall this plugin now? If you're unsure, probably you would like to do this.
-
@@ -39855,50 +39515,50 @@ You need to restart QGIS in order to reload it.
Repository details
-
Enter a name for the repository
-
Name
-
Enter the repository URL, beginning with "http://"
-
Enable or disable the repository (disabled repositories will be omitted)
-
Parameters
- المعايير
+
?qgis=
-
URL
- الرابط
+
Enabled
-
@@ -39907,284 +39567,284 @@ You need to restart QGIS in order to reload it.
Plugins
-
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
No Plugins
-
No QGIS plugins found in %1
-
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
-
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
Installable
category: plugins that are available for installation
-
This plugin is incompatible with this version of QGIS
-
Plugin designed for QGIS %1
compatible QGIS version(s)
-
This plugin requires a missing module
-
This plugin is broken
-
There is a new version available
-
This is a new plugin
-
Installed version of this plugin is higher than any version found in repository
-
This plugin is experimental
-
This plugin is deprecated
-
Category
-
Tags
-
Author
-
More info
-
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Upgrade plugin
-
Downgrade plugin
-
Install plugin
-
Reinstall plugin
-
Reload all repositories
-
Only show plugins from selected repository
-
Clear filter
-
connected
-
The repository is connected
-
unavailable
-
The repository is enabled, but unavailable
-
disabled
-
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
@@ -40192,253 +39852,253 @@ You need to restart QGIS in order to reload it.
Plugin Manager
-
All
-
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
New
- جديد
+
Not installed plugins seen for the first time
-
Invalid
-
Broken and incompatible installed plugins
-
Settings
- إعدادات
+
Search
-
Not installed
-
about:blank
- حول: فارغة
+
Upgrade all upgradeable plugins
-
Upgrade all
-
Uninstall the selected plugin
-
Uninstall plugin
-
Install, reinstall or upgrade the selected plugin
-
Reinstall plugin
-
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
Check for updates on startup
-
every time QGIS starts
-
once a day
-
every 3 days
-
every week
-
every 2 weeks
-
every month
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
-
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Status
-
Name
-
URL
- الرابط
+
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Add a new plugin repository
-
Add...
- أضف...
+
Edit the selected repository
-
Edit...
-
Remove the selected repository
-
Delete
- إلغاء
+
@@ -40448,19 +40108,19 @@ p, li { white-space: pre-wrap; }
None
- لا شيء
+
Label Font
-
The point displacement renderer only applies to (single) point layers.
'%1' is not a point layer and cannot be displayed by the point displacement renderer
-
@@ -40468,77 +40128,77 @@ p, li { white-space: pre-wrap; }
Form
- شكل
+
Center symbol:
-
Renderer:
-
Renderer settings...
-
Displacement circles
-
Circle pen width:
-
Circle color:
-
Circle radius modification:
-
Point distance tolerance:
-
Labels
-
Label attribute:
-
Label font...
-
Label color:
-
Use scale dependent labelling
-
max scale denominator:
-
@@ -40549,7 +40209,7 @@ p, li { white-space: pre-wrap; }
Millimeter
-
Map unit
-
Horizontal distance
-
Vertical distance
-
Horizontal displacement
-
Vertical displacement
-
@@ -40585,7 +40245,7 @@ p, li { white-space: pre-wrap; }
Connection to database failed
-
PostGIS
- PostGIS
+
error in setting encoding
-
undefined return value from encoding setting
-
Your database has no working PostGIS support.
-
Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net)
-
Database connection was successful, but the accessible tables could not be determined.
-
Database connection was successful, but the accessible tables could not be determined. The error message from the database was:
%1
-
Database connection was successful, but the accessible tables could not be determined.
The error message from the database was:
%1
-
Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry.
-
Unable to get list of spatially enabled tables from the database
-
Retrieval of postgis version failed
-
Could not parse postgis version string '%1'
-
Connection error: %1 returned %2 [%3]
-
Erroneous query: %1 returned %2 [%3]
-
Query failed: %1
Error: no result buffer
-
Query: %1 returned %2 [%3]
-
%1 cursor states lost.
SQL: %2
Result: %3 (%4)
-
resetting bad connection.
-
retry after reset succeeded.
-
retry after reset failed again.
-
connection still bad after reset.
-
bad connection, not retrying.
-
Point
- نقاط
+
Multipoint
-
Line
- خطوط
+
Multiline
-
Polygon
- مضلعات
+
Multipolygon
-
No Geometry
-
Unknown Geometry
-
None
- لا شيء
+
Geometry
- هندسة
+
Geography
-
TopoGeometry
-
Query could not be canceled [%1]
-
PQgetCancel failed
-
@@ -40813,7 +40473,7 @@ Result: %3 (%4)
invalid PostgreSQL layer
-
PostGIS
- PostGIS
+
invalid PostgreSQL topology layer
-
PostgreSQL layer has no primary key.
-
Whole number (smallint - 16bit)
-
Whole number (integer - 32bit)
-
Whole number (integer - 64bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, unlimited length (text)
-
Date
-
PostgreSQL layer has unknown primary key type.
-
Read attempt on an invalid postgresql data source
-
FAILURE: Field %1 not found.
-
unexpected formatted field type '%1' for field %2
-
Field %1 ignored, because of unsupported type %2
-
Field %1 ignored, because of unsupported type type %2
-
Duplicate field %1 found
-
PostgreSQL is still in recovery after a database crash
(or you are connected to a (read-only) slave).
Write accesses will be denied.
-
The custom query is not a select query.
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
Unexpected relation type '%1'.
-
No key field for query given.
-
Could not find topology of layer %1.%2.%3
-
PostGIS error while adding features: %1
-
PostGIS error while deleting features: %1
-
PostGIS error while adding attributes: %1
-
PostGIS error while deleting attributes: %1
-
PostGIS error while changing attributes: %1
-
PostGIS error while changing geometry values: %1
-
result of extents query invalid: %1
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
PostgreSQL version: unknown
-
unknown
-
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -41093,47 +40753,47 @@ PostGIS %2
Loading layer %1
-
Unable to open %1
-
Project File Read Error
-
%1 at line %2 column %3
-
Project file read error: %1 at line %2 column %3
-
%1 for file %2
-
Unable to save to file %1
-
%1 is not writable. Please adjust permissions (if possible) and try again.
-
Unable to save to file %1. Your project may be corrupted on disk. Try clearing some space on the volume and check file permissions before pressing save again.
-
@@ -41141,18 +40801,18 @@ PostGIS %2
Ignore
-
QGIS Project Read Error
-
Unable to open one or more project layers.
Choose ignore to continue loading without the missing layers. Choose cancel to return to your pre-project load state. Choose OK to try to find the missing layers.
-
@@ -41160,22 +40820,22 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select project file
-
QGIS files
-
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -41183,173 +40843,173 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select layers and groups to embed
-
Project file
-
...
- ...
+
QgsProjectProperties
- Layer
- طبقة
+
+
+ Type
+
Type
- نوع
-
-
- Identifiable
-
- Vector
- طبقة خطية
+
- WMS
- WMS
+
- Raster
- طبقة شبكية
+
- Coordinate System Restriction
-
- No coordinate systems selected. Disabling restriction.
-
- Selection color
-
+
+ Measure tool (CRS transformation: %1)
+
Measure tool (CRS transformation: %1)
-
-
- Canvas units (CRS transformation: %1)
-
+ OFF
-
+ ON
-
- CRS %1 was already selected
-
+
+ Coordinate System Restrictions
+
Coordinate System Restrictions
-
-
- The current selection of coordinate systems will be lost.
Proceed?
-
- Select print composer
-
- Composer Title
-
- Select restricted layers and groups
-
+
+ Enter scale
+
Enter scale
- Scale denominator
+
- Scale denominator
- Load scales
+
Load scales
-
-
- XML files (*.xml *.XML)
-
-
XML files (*.xml *.XML)
+
+
+ Save scales
-
- Select a valid symbol
-
- Invalid symbol :
-
- Parameters:
-
+ Select %1 from pull-down menu to adjust radii
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
-
@@ -41357,504 +41017,498 @@ Proceed?
Project Properties
-
General
-
General settings
-
Project title
-
Descriptive project name
-
Default project title
-
Selection color
-
Background color
- لون الخلفية
+
absolute
-
relative
-
Save paths
-
- Measure tool
-
- Semi-minor
-
+
+ Semi-major
+
Semi-major
-
-
- Used when CRS transformation is turned off
-
- Canvas units
-
- Meters
- أمتار
+
- Feet
- قدم
+
CRS
- CRS
+
Coordinate Reference System
-
Identify layers
-
Default styles
-
OWS server
-
- Ellipsoid
(for distance calculations)
-
- Degree
-
- Degree display
-
- Decimal degrees
-
- Degrees, Minutes
-
- Degrees, Minutes, Seconds
-
- Precision
- دقة
+
- Automatically sets the number of decimal places in the mouse position display
-
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
-
-
- Automatic
-
-
- Sets the number of decimal places to use for the mouse position display
-
-
- Manual
-
-
- The number of decimal places for the manual option
-
Automatic
+
+
+ Sets the number of decimal places to use for the mouse position display
+
+
+ Manual
+
+
+ The number of decimal places for the manual option
+
+
+ decimal places
-
- Project scales
-
- ...
- ...
+
- Enable 'on the fly' CRS transformation
-
Identifiable layers
-
- Project layers
-
- Layer
- طبقة
+
- Type
- نوع
+
- Identifiable
-
- Marker
-
- Line
- خطوط
+
- Default symbols
-
- Fill
-
- Color Ramp
-
- Transparency
- شفافية
+
- %
-
- Style Manager
-
- Options
-
Relations
-
- Project file
-
-
- Nautical miles
-
- Assign random colors to symbols
-
- Service capabilities
-
- Person
-
- Title
- عنوان
+
- Organization
-
- Online resource
-
- E-Mail
-
- Phone
-
- Abstract
-
- Fees
-
- Access constraints
-
- Keyword list
-
- WMS capabilities
-
- Add geometry to feature response
-
- Min. X
-
- Min. Y
-
- Max. X
-
- Max. Y
-
- Use Current Canvas Extent
-
- Used
-
- Exclude composers
-
- WFS capabilities
-
- WCS capabilities
-
- Exclude layers
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
- Published
-
- Update
-
- Insert
-
- Delete
- إلغاء
+
- Unselect all
-
- Select all
- إختيار الكل
+
Macros
-
- Advertised URL
-
- Width
- عرض
+
- Height
- ارتفاع
+
- Maximums for GetMap request
-
- Advertised extent
-
- CRS restrictions
-
- Python macros
-
@@ -41862,29 +41516,29 @@ Proceed?
User Defined Coordinate Systems
-
Geographic Coordinate Systems
-
Projected Coordinate Systems
-
Resource Location Error
-
Error reading database file from:
%1
Because of this the projection selector will not work...
-
@@ -41892,50 +41546,50 @@ Because of this the projection selector will not work...
Coordinate Reference System Selector
-
Filter
-
Recently used coordinate reference systems
-
Coordinate Reference System
-
Selected CRS:
-
Authority ID
-
ID
- المعرف
+
Coordinate reference systems of the world
-
Hide deprecated CRSs
-
@@ -41943,49 +41597,42 @@ Because of this the projection selector will not work...
&Test
-
&Clear
- & إزالة
+
Set provider filter on %1
-
Query Result
-
The where clause returned %n row(s).
returned test rows
-
-
+
Query Failed
-
An error occurred when executing the query.
-
The data provider said:
%1
-
Error in Query
-
The subset string could not be set
-
@@ -42011,149 +41658,149 @@ The data provider said:
Query Builder
-
Datasource
-
Fields
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
-
Values
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
-
Sample
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
-
All
-
Use unfiltered layer
-
Operators
-
=
-
<
-
NOT
-
OR
-
AND
-
%
-
IN
-
NOT IN
-
!=
-
>
-
LIKE
-
ILIKE
-
>=
-
<=
-
Provider specific filter expression
-
@@ -42162,29 +41809,29 @@ p, li { white-space: pre-wrap; }
Editable
- قابل للتحرير
+
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42192,32 +41839,32 @@ p, li { white-space: pre-wrap; }
Form
- شكل
+
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Maximum
- الأقصى
+
Minimum
- الأدنى
+
Local minimum/maximum = 0/0
-
@@ -42225,17 +41872,17 @@ p, li { white-space: pre-wrap; }
Enter result file
-
Expression valid
-
Expression invalid
-
@@ -42243,187 +41890,187 @@ p, li { white-space: pre-wrap; }
Raster calculator
-
Raster bands
-
Result layer
-
Output layer
-
...
- ...
+
Current layer extent
-
X min
- X اﻷدنى
+
XMax
-
Y min
- Y اﻷدنى
+
Y max
- Y الأقصى
+
Columns
- الأعمدة
+
Rows
- الصفوف
+
Output format
- تنسيق الإخراج
+
Add result to project
-
Operators
-
+
-
*
-
sqrt
-
sin
-
^
-
acos
-
(
-
-
-
/
-
cos
-
asin
-
tan
-
atan
-
)
-
<
-
>
-
=
-
OR
-
AND
-
<=
-
>=
-
Raster calculator expression
-
@@ -42431,27 +42078,27 @@ p, li { white-space: pre-wrap; }
Format not supported
-
Value
- قيمة
+
Text
-
Html
-
Feature
-
@@ -42459,61 +42106,61 @@ p, li { white-space: pre-wrap; }
Default
- افتراضي
+
No compression
-
Low compression
-
High compression
-
JPEG compression
-
Cannot get create options for driver %1
-
For details on pyramids options please see the following pages
-
No help available
-
cannot validate pyramid options
-
Cannot validate creation options
-
Valid
-
pyramid creation option
-
creation option
-
Profile name:
-
Use simple interface
-
Use table interface
-
@@ -42555,62 +42202,62 @@ Click on help button to get valid creation options for this format.
Form
- شكل
+
New
- جديد
+
Remove
- حذف
+
Reset
- إعادة ضبط
+
Profile
-
Name
-
Value
- قيمة
+
+
-
Validate
-
Help
- مساعدة
+
-
-
Insert KEY=VALUE pairs separated by spaces
-
@@ -42618,119 +42265,119 @@ Click on help button to get valid creation options for this format.
Visibility
-
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Show all bands
-
Show RGB/Gray band(s)
-
Show selected band
-
Display
- عرض
+
Draw as lines
-
Draw as lines (only int layers)
-
Actions
-
Reset
- إعادة ضبط
+
Load min/max
-
Estimate (faster)
-
Actual (slower)
-
Current extent
-
Use stddev (1.0)
-
Use stddev (custom)
-
Load for each band
-
Recompute Histogram
-
Band %1
-
Choose a file name to save the map image as
- اختيار اسم ملف لحفظ صورة الخريطة كما
+
@@ -42738,58 +42385,58 @@ Click on help button to get valid creation options for this format.
Form
- شكل
+
Set min/max style for
-
Min
- أدنى قيمة
+
Pick Min value on graph
-
...
- ...
+
Max
- أعلى قيمة
+
Pick Max value on graph
-
Prefs/Actions
-
Save plot
-
Save as image...
-
Compute Histogram
-
@@ -42797,27 +42444,27 @@ Click on help button to get valid creation options for this format.
Identify
-
Build Pyramids
-
Create Datasources
-
Remove Datasources
-
Band
-
@@ -42827,192 +42474,192 @@ Click on help button to get valid creation options for this format.
Not Set
-
QgsRasterLayer created
-
Raster
- طبقة شبكية
+
No Data Value
-
NoDataValue not set
-
Could not determine raster data type.
-
Driver
- برنامج التشغيل
+
Data Type
-
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Band
-
Band No
-
No Stats
-
No stats collected yet
-
Min Val
-
Max Val
-
Range
- النطاق
+
Mean
- المتوسط
+
Sum of squares
-
Standard Deviation
-
Sum of all cells
-
Cell Count
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
<maplayer> not found.
-
@@ -43020,89 +42667,89 @@ Click on help button to get valid creation options for this format.
Not Set
-
Description
- الوصف
+
Large resolution raster layers can slow navigation in QGIS.
-
By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom.
-
You must have write access in the directory where the original data is stored to build pyramids.
-
Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
-
Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
-
Layer Properties - %1
-
Nearest neighbour
-
Bilinear
- تصفية الصورة
+
Cubic
- مُكعب
+
Average
- متوسط
+
None
- لا شيء
+
Red
-
Green
-
Blue
-
Percent Transparent
-
Gray
- رمادي
+
Indexed Value
-
From
-
To
-
not defined
-
Columns: %1
-
Rows: %1
-
Columns:
-
n/a
-
Rows:
-
No-Data Value:
-
No-Data Value: %1
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
- نفى وصول الكتابة. إضبط أذونات الملف وحاول مرة أخرى.
+
Building pyramids failed.
- فشل في بناء الأهرامات.
+
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Save file
-
Textfile
-
QGIS Generated Transparent Pixel Value Export File
-
Value
- قيمة
+
Write access denied. Adjust the file permissions and try again.
-
Open file
- فتح ملف
+
Import Error
-
The following lines contained errors
%1
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Default Style
-
Load layer properties from style file
-
QGIS Layer Style File
-
Saved Style
-
Save layer properties as style file
-
@@ -43302,304 +42949,304 @@ Click on help button to get valid creation options for this format.
Raster Layer Properties
-
Save Style ...
-
Load Style ...
-
Resolutions
-
Save As Default
-
Restore Default Style
-
Render type
-
Resampling
-
Oversampling
-
Transparency
- شفافية
+
Style
- نمط
+
Layer info
-
Description
- الوصف
+
Keyword list
-
Format
- التنسيق
+
Attribution
-
Url
-
MetadataUrl
-
Type
- نوع
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
- خصائص
+
Band rendering
-
Color rendering
-
Saturation
-
Off
-
By lightness
-
By luminosity
-
By average
-
Hue
-
Blending mode
-
Brightness
-
Contrast
-
Grayscale
-
Colorize
-
Strength
-
%
-
Reset all color rendering options to default
-
Reset
- إعادة ضبط
+
Zoomed: in
-
out
-
Global transparency
-
None
- لا شيء
+
00%
-
<p align="right">Full</p>
-
No data value
-
Use original source no data value.
-
No data value:
-
Original data source no data value, if exists.
-
<src no data value>
-
Additional user defined no data value.
-
Additional no data value
-
Custom transparency options
-
Transparency band
-
Add values from display
-
Transparent pixel list
-
Add values manually
-
...
- ...
+
Remove selected row
-
Default values
-
Import from file
-
Export to file
-
General
-
Layer name
-
displayed as
-
Layer source
-
Columns
- الأعمدة
+
Rows
- الصفوف
+
No Data
-
Scale dependent visibility
-
Coordinate reference system
-
Specify the coordinate reference system of the layer's geometry.
-
Specify...
-
Thumbnail
-
Legend
- الأجندة
+
Palette
- لوحة
+
Metadata
- بيانات وصفية
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Title
- عنوان
+
Abstract
-
Pyramids
-
Average
- متوسط
+
Nearest Neighbour
-
Build pyramids
-
Resampling method
-
Overview format
-
External
-
Internal (if possible)
-
External (Erdas Imagine)
-
Histogram
-
@@ -43787,67 +43434,67 @@ p, li { white-space: pre-wrap; }
From
-
To
-
Select output directory
-
Warning
-
The directory %1 contains files which will be overwritten: %2
-
Select output file
-
GeoTIFF
-
layer
-
user defined
-
Resolution (current: %1)
-
Layer (%1, %2)
-
Project (%1, %2)
-
Selected (%1, %2)
-
@@ -43855,175 +43502,175 @@ p, li { white-space: pre-wrap; }
Save raster layer as...
-
Output mode
-
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Format
- التنسيق
+
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
Create VRT
-
Save as
-
Browse...
-
CRS
- CRS
+
Change ...
-
Extent
- الامتداد
+
Resolution
-
Horizontal
- أفقي
+
Columns
- الأعمدة
+
Rows
- الصفوف
+
Layer resolution
-
Layer size
-
Vertical
- عمودي
+
VRT Tiles
-
Maximum number of columns in one tile.
-
Max columns
-
Maximum number of rows in one tile.
-
Max rows
-
Create Options
-
Pyramids
-
Resolutions
-
Pyramid resolutions corresponding to levels given
-
Use existing
-
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
- & لا يوجد قيمة في البيانات
+
Add values manually
-
...
- ...
+
Load user defined fully transparent (100%) values
-
Remove selected row
-
Clear all
-
@@ -44054,12 +43701,12 @@ datasets with maximum width and height specified below.
No option selected
-
Please select an option to load min/max values.
-
@@ -44067,74 +43714,74 @@ datasets with maximum width and height specified below.
Form
- شكل
+
Load min/max values
-
-
-
%
-
Min / max
-
Extent
- الامتداد
+
Full
-
Current
-
Accuracy
-
Actual (slower)
-
Estimate (faster)
-
Cumulative
count cut
-
Mean +/-
standard deviation ×
-
Load
-
@@ -44142,62 +43789,62 @@ standard deviation ×
Form
- شكل
+
Insert positive integer values separated by spaces
-
External (GTiff .ovr)
-
Internal (if possible)
-
External (Erdas Imagine .aux)
-
Levels
-
Create Options
-
Resampling method
-
Average
- متوسط
+
Nearest Neighbour
-
Custom levels
-
Overview format
-
@@ -44205,53 +43852,53 @@ standard deviation ×
Unknown
-
User defined
-
Estimated
-
Exact
-
min / max
-
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
-
@@ -44259,63 +43906,63 @@ standard deviation ×
Export Frequency distribution as csv
-
Export Colors and elevations as xml
-
Import Colors and elevations from xml
-
Error opening file
-
The relief color file could not be opened
-
Error parsing xml
-
The xml file could not be loaded
-
Enter result file
-
Enter lower elevation class bound
-
Elevation
-
Enter upper elevation class bound
-
Select color for relief class
-
@@ -44323,112 +43970,112 @@ standard deviation ×
Dialog
- حوار
+
Elevation layer
-
Output layer
-
...
- ...
+
Output format
- تنسيق الإخراج
+
Z factor
-
Add result to project
-
Illumination
-
Azimuth (horizontal angle)
-
Vertical angle
-
Relief colors
-
Create automatically
-
Export distribution...
-
Up
- أعلى
+
Down
- أسفل
+
+
-
-
-
Lower bound
-
Upper bound
-
Color
-
Export colors...
-
Import colors...
-
@@ -44436,41 +44083,41 @@ standard deviation ×
Terrain analysis
-
Slope
- انحدار
+
Aspect
- منظر
+
Hillshade
- تضاريس
+
Relief
-
Ruggedness index
-
Calculating hillshade...
-
Abort
- إجهاض
+
Calculating relief...
-
Calculating slope...
-
Calculating aspect...
-
Ruggedness
-
Calculating ruggedness...
-
@@ -44512,7 +44159,7 @@ standard deviation ×
Preview Expression
-
@@ -44520,32 +44167,32 @@ standard deviation ×
Dialog
- حوار
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -44553,19 +44200,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -44573,7 +44220,7 @@ standard deviation ×
[Generated automatically]
-
@@ -44581,37 +44228,37 @@ standard deviation ×
Add relation
-
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
-
Id
- معرف
+
@@ -44619,43 +44266,43 @@ standard deviation ×
Form
- شكل
+
Toggle editing
-
New
- جديد
+
Delete
- إلغاء
+
Link
-
Unlink
-
Form View
-
Table View
-
@@ -44663,47 +44310,47 @@ standard deviation ×
Dialog
- حوار
+
Name
-
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
- معرف
+
Add Relation
-
Remove Relation
-
@@ -44711,17 +44358,17 @@ standard deviation ×
Open Form
-
(no selection)
-
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -44729,72 +44376,65 @@ standard deviation ×
Rule properties
-
Label
- رمز
+
Filter
-
...
- ...
+
Test
-
Description
- الوصف
+
Scale range
-
Symbol
- رمز
+
Error
- خطأ
+
Filter expression parsing error:
-
Evaluation error
- خطأ في التقييم
+
Filter returned %n feature(s)
number of filtered features
-
-
+
@@ -44802,24 +44442,24 @@ standard deviation ×
Rotation field
-
Size scale field
-
Scale area
-
Scale diameter
-
- expression -
-
- no field -
-
@@ -44846,32 +44486,32 @@ standard deviation ×
Renderer settings
-
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
This renderer doesn't implement a graphical interface.
-
@@ -44879,88 +44519,88 @@ standard deviation ×
Copy
- نسخ
+
Paste
-
Change color
-
Change transparency
-
Change output unit
-
Change width
-
Change size
-
Transparency
- شفافية
+
Change symbol transparency [%]
-
Symbol unit
-
Select symbol unit
-
Millimeter
-
Map unit
-
Width
- عرض
+
Change symbol width
-
Size
- حجم
+
Change symbol size
-
@@ -44968,52 +44608,52 @@ standard deviation ×
(no filter)
-
<li><nobr>%1 features also in rule %2</nobr></li>
-
Label
- رمز
+
Rule
-
Min. scale
-
Count
- عدد
+
Duplicate count
-
Max. scale
-
Number of features in this rule.
-
Number of features in this rule which are also present in other rule(s).
-
@@ -45021,103 +44661,103 @@ standard deviation ×
Add rule
-
Edit rule
-
Remove rule
-
Refine current rules
-
Count features
-
Rendering order...
-
Remove Rule
-
Refine current rule
-
Add scales to rule
-
Add categories to rule
-
Add ranges to rule
-
Refine a rule to categories
-
Refine a rule to ranges
-
Scale refinement
-
Parent rule %1 must have a symbol for this operation.
-
Please enter scale denominators at which will split the rule, separate them by commas (e.g. 1000,5000):
-
Error
- خطأ
+
"%1" is not valid scale denominator, ignoring it.
-
Calculating feature count.
-
Abort
- إجهاض
+
@@ -45125,28 +44765,28 @@ standard deviation ×
<b>Starting %1...</b>
-
Action
- إجراء
+
Unable to run command
%1
-
Done
-
Unable to run command %1
-
@@ -45154,61 +44794,61 @@ standard deviation ×
Database does not exist
-
Failed to open database
-
Failed to check metadata
-
Failed to get list of tables
-
Unknown error
-
Delete
- إلغاء
+
%1: Not a vector layer!
-
%1: OK!
-
Import to SpatiaLite database
-
Failed to import some layers!
-
Import was successful.
-
@@ -45218,12 +44858,12 @@ standard deviation ×
Delete layer
-
Layer deleted successfully.
-
@@ -45231,39 +44871,39 @@ standard deviation ×
New Connection...
-
Create database...
-
New SpatiaLite Database File
-
SpatiaLite
- SpatiaLite
+
Create SpatiaLite database
-
The database has been created
-
Failed to create the database:
-
@@ -45271,55 +44911,55 @@ standard deviation ×
Texture width
-
SVG file
-
Millimeter
-
Map unit
-
Select SVG texture file
-
All files
- جميع الملفات
+
Rotation
-
Color
-
Border color
-
Border width
-
@@ -45327,32 +44967,32 @@ standard deviation ×
Save style in database
-
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
@@ -45360,37 +45000,37 @@ standard deviation ×
Save style
-
Description
- الوصف
+
UI
-
Style Name
-
Use as default style for this layer
-
Open...
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45399,29 +45039,29 @@ standard deviation ×
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -45429,7 +45069,7 @@ standard deviation ×
Scale visibility
-
@@ -45437,86 +45077,79 @@ standard deviation ×
Search query builder
-
&Test
-
&Clear
- & إزالة
+
&Save...
-
Save query to an xml file
-
&Load...
-
Load query from xml file
-
Search results
-
Found %n matching feature(s).
test result
-
-
+
Search string parsing error
-
Evaluation error
- خطأ في التقييم
+
Error during search
-
No Records
-
The query you specified results in zero records being returned.
-
Save query to file
-
Error
- خطأ
+
Could not open file for writing
-
Load query from file
-
Query files
-
All files
- جميع الملفات
+
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
Select attribute
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -45577,50 +45210,43 @@ standard deviation ×
Validation started.
-
Validation finished (%n error(s) found).
number of geometry errors
-
-
+
ring %1, vertex %2
-
polygon %1, ring %2, vertex %3
-
polyline %1, vertex %2
-
vertex %1
-
point %1
-
single point
-
@@ -45628,7 +45254,7 @@ standard deviation ×
Scanning
-
The database gave an error while executing this SQL:
-
... (rest of SQL trimmed)
is appended to a truncated SQL statement
-
The error was:
%1
-
@@ -45666,48 +45292,48 @@ The error was:
Millimeter
-
Map unit
-
Color (start)
-
Color (end)
-
Blur radius
-
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -45716,28 +45342,28 @@ The error was:
Millimeter
-
Map unit
-
Color
-
Border color
-
Border width
-
@@ -45747,44 +45373,44 @@ The error was:
Millimeter
-
Map unit
-
Color
-
Pen width
-
Offset
-
Dash pattern
-
Join style
-
Cap style
-
@@ -45794,54 +45420,54 @@ The error was:
Millimeter
-
Map unit
-
Name
-
Fill color
-
Border color
-
Outline width
-
Angle
- زاوية
+
Offset
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -45849,32 +45475,32 @@ The error was:
Black to white
-
White to black
-
No enhancement
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
@@ -45882,33 +45508,33 @@ The error was:
Form
- شكل
+
Contrast
enhancement
-
Gray band
-
Min
- أدنى قيمة
+
Max
- أعلى قيمة
+
Color gradient
-
@@ -45920,7 +45546,7 @@ enhancement
Discrete
-
Linear
-
Exact
-
Continuous
-
Equal interval
-
Custom color map entry
-
Load Color Map
-
The color map for band %1 has no entries
-
Open file
- فتح ملف
+
Textfile (*.txt)
-
Import Error
-
The following lines contained errors
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Save file
-
QGIS Generated Color Map Export File
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
@@ -46027,22 +45653,22 @@ enhancement
Form
- شكل
+
Band
-
Color interpolation
-
Add values manually
-
...
- ...
+
Remove selected row
-
Sort colormap items
-
Load color map from band
-
Load color map from file
-
Export color map to file
-
Value
- قيمة
+
Color
-
Label
- رمز
+
Clip
- مقطع
+
Generate new color map
-
Mode
-
Classes
-
Min
- أدنى قيمة
+
Max
- أعلى قيمة
+
Invert
-
Classify
- تصنيف
+
Min / max origin:
-
Min / Max origin
-
@@ -46150,7 +45776,7 @@ enhancement
Symbol levels...
- مستويات الرمز...
+
@@ -46158,32 +45784,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -46191,12 +45817,12 @@ enhancement
Form
- شكل
+
The Symbol
-
@@ -46204,22 +45830,22 @@ enhancement
ALL the constraints
-
any ONE of the constraints
-
Invalid name
-
The smart group name field is empty. Kindly provide a name
-
@@ -46227,27 +45853,27 @@ enhancement
Smart Group Editor
-
Smart Group Name
-
Condition matches
-
Add Condition
-
Conditions
-
@@ -46255,34 +45881,34 @@ enhancement
Snapping and Digitizing Options
-
to vertex
-
to segment
-
to vertex and segment
-
map units
- وحدات الخريطة
+
pixels
-
@@ -46290,47 +45916,47 @@ enhancement
Snapping options
-
Layer
- طبقة
+
Mode
-
Tolerance
- تحمُل
+
Units
- وحادت
+
Avoid Int.
-
Avoid intersections of new polygons
-
Enable topological editing
-
Enable snapping on intersection
-
@@ -46338,70 +45964,70 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
unknown error cause
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
UNKNOWN
-
GEOMETRY
-
POINT
-
LINESTRING
-
POLYGON
-
MULTIPOINT
-
MULTILINESTRING
-
MULTIPOLYGON
-
GEOMETRYCOLLECTION
-
@@ -46409,27 +46035,27 @@ enhancement
Binary object (BLOB)
-
Text
-
Decimal number (double)
-
Whole number (integer)
-
Retrieval of spatialite version failed
-
SpatiaLite
- SpatiaLite
+
Could not parse spatialite version string '%1'
-
SQLite error: %2
SQL: %1
- SQLite خطأ: % 2
-% SQL: 1
+
unknown cause
-
FAILURE: Field %1 not found.
-
@@ -46517,69 +46142,69 @@ SQL: %1
Add SpatiaLite Table(s)
-
Databases
-
&Update statistics
-
&Add
- &أضف
+
&Set Filter
-
Wildcard
-
RegExp
-
All
-
Table
- جدول
+
Type
- نوع
+
Geometry column
- عمود هندسي
+
Sql
-
Confirm Update Statistics
-
Update Statistics
-
Internal statistics successfully updated for: %1
-
Error while updating internal statistics for: %1
-
@
-
Choose a SpatiaLite/SQLite DB to open
-
SpatiaLite DB
-
All files
- جميع الملفات
+
Error
- خطأ
+
Cannot add connection '%1' : a connection with the same name already exists.
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Select Table
-
You must select a table in order to add a Layer.
-
SpatiaLite DB Open Error
-
Database does not exist: %1
-
Failure while connecting to: %1
%2
-
SpatiaLite getTableInfo Error
-
Failure exploring tables from: %1
%2
-
SpatiaLite Error
-
Unexpected error when working with: %1
%2
-
@@ -46708,52 +46333,52 @@ but implies better performance thereafter.
Table
- جدول
+
Type
- نوع
+
Geometry column
- عمود هندسي
+
Sql
-
Point
- نقاط
+
Multipoint
-
Line
- خطوط
+
Multiline
-
Polygon
- مضلعات
+
Multipolygon
-
@@ -46761,142 +46386,135 @@ but implies better performance thereafter.
The spatial query requires at least two vector layers
-
%n selected geometries
selected geometries
-
-
+
Selected geometries
-
%1)Query
-
Begin at %L1
-
< %1 >
-
Total of features = %1
-
Total of invalid features:
-
Finish at %L1 (processing time %L2 minutes)
-
Using the field "%1" for subset
-
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
%1 of %2
-
all = %1
-
%1 of %2(selected features)
-
Create new selection
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
user
- مستخدم
+
Map "%1" "on the fly" transformation.
-
enable
-
disable
-
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Zoom to feature
-
Missing reference layer
-
Select reference layer!
-
Missing target layer
-
Select target layer!
-
Create new layer from items
-
The query from "%1" using "%2" in field not possible.
-
Create new layer from selected
-
%1 of %2 identified
-
@@ -46958,127 +46576,127 @@ CRS of map is %1.
Spatial Query
-
Layer on which the topological operation will select geometries
-
Select source features from
-
Select the target layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
-
Selected feature(s) only
-
Where the feature
-
Select the topological operation
-
Layer whose geometries will be used as reference by the topological operation
-
Reference features of
-
Select the reference layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
-
And use the result to
-
Selected features
-
Number of selected features in map
-
Create layer with selected
-
Result feature ID's
-
Select one FID to identify geometry of feature
-
Create layer with list of items
-
Zoom to item
-
Check to show log processing of query
-
Log messages
-
Run query or close the window
-
@@ -47088,17 +46706,17 @@ p, li { white-space: pre-wrap; }
&Spatial Query
-
Query not executed
-
DEBUG
-
@@ -47106,38 +46724,38 @@ p, li { white-space: pre-wrap; }
Select a Spatialite Spatial Reference System
-
SRID
- SRID
+
Authority
-
Reference Name
-
Search
-
Filter
-
Name
-
@@ -47145,165 +46763,165 @@ p, li { white-space: pre-wrap; }
File Name
-
Feature Class
-
Features
- الميزات
+
DB Relation Name
-
Schema
-
Are you sure you want to remove the [%1] connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Add Shapefiles
-
Shapefiles
-
All files
- جميع الملفات
+
The following Shapefile(s) could not be loaded:
-
REASON: File cannot be opened
-
REASON: One or both of the Shapefile files (*.dbf, *.shx) missing
-
General Interface Help:
-
PostgreSQL Connections:
-
[New ...] - create a new connection
-
[Edit ...] - edit the currently selected connection
-
[Remove] - remove the currently selected connection
-
-you need to select a connection that works (connects properly) in order to import files
-
-when changing connections Global Schema also changes accordingly
-
Shapefile List:
-
[Add ...] - open a File dialog and browse to the desired file(s) to import
-
[Remove] - remove the currently selected file(s) from the list
-
[Remove All] - remove all the files in the list
-
[SRID] - Reference ID for the shapefiles to be imported
-
[Use Default (SRID)] - set SRID to -1
-
[Geometry Column Name] - name of the geometry column in the database
-
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
-
[Global Schema] - set the schema for all files to be imported into
-
[Import] - import the current shapefiles in the list
-
[Quit] - quit the program
-
[Help] - display this help dialog
-
Import Shapefiles
-
You need to specify a Connection first
-
Password for %1
-
Please enter your password:
-
Connection failed - Check settings and try again
-
PostGIS not available
-
<p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
-
You need to add shapefiles to the list first
-
Importing files
-
Cancel
- إالغاء
+
Progress
-
Problem inserting features from file:
-
%1
Invalid table name.
-
%1
No fields detected.
-
%1
The following fields are duplicates:
%2
-
Importing files
%1
-
%1
<p>Error while executing the SQL:</p><p>%2</p><p>The database said:%3</p>
-
Import Shapefiles - Relation Exists
-
%1 of %2 shapefiles could not be imported.
-
@@ -47450,132 +47068,132 @@ Do you want to overwrite the [%2] relation?
SPIT - Shapefile to PostGIS Import Tool
-
PostgreSQL connections
-
Connect to PostGIS
-
Connect
-
Create a new PostGIS connection
-
New
- جديد
+
Edit the current PostGIS connection
-
Edit
- تعديل
+
Remove the current PostGIS connection
-
Remove
- حذف
+
Import options and shapefile list
-
Geometry column name
-
Set the geometry column name to the default value
-
Use default geometry column name
-
SRID
- SRID
+
Set the SRID to the default value
-
Use default SRID
-
Primary key column name
-
Global schema
-
Add a shapefile to the list of files to be imported
-
Add
-
Remove the selected shapefile from the import list
-
Remove all the shapefiles from the import list
-
Remove All
-
@@ -47583,18 +47201,18 @@ Do you want to overwrite the [%2] relation?
&Import Shapefiles to PostgreSQL
-
Import shapefiles into a PostGIS-enabled PostgreSQL database. The schema and field names can be customized on import
-
&Spit
-
@@ -47602,20 +47220,20 @@ Do you want to overwrite the [%2] relation?
QGIS Sponsors
- QGIS الداعمون ل
+
TextLabel
- تسمية نصية
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47629,7 +47247,155 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
+
+
+ QgsSqlAnywhereProvider
+
+ Failed to load interface
+
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
@@ -47637,163 +47403,163 @@ p, li { white-space: pre-wrap; }
Select all
- إختيار الكل
+
Clear selection
-
Import style(s)
-
file specified below
-
URL specified below
-
Select symbols to import
-
Import
-
Export style(s)
-
Export
-
Export/import error
-
You should select at least one symbol/color ramp.
-
Save styles
-
XML files (*.xml *.XML)
-
Error when saving selected symbols to file:
%1
-
Import error
-
An error occured during import:
%1
-
Group Name
-
Please enter a name for new group:
-
imported
-
New Group
-
New group cannot be created without a name. Kindly enter a name.
-
New group
-
Cannot create a group without name. Enter a name.
-
Duplicate names
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
-
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
-
Load styles
-
XML files (*.xml *XML)
-
Downloading style ...
-
HTTP Error!
-
Download failed: %1.
-
@@ -47801,27 +47567,27 @@ Overwrite?
Styles import/export
-
Import from
-
Location
-
Save to group
-
Select symbols to export
-
@@ -47829,317 +47595,317 @@ Overwrite?
Type here to filter symbols...
-
Share Menu
-
Export
-
Import
-
Group Actions
-
Group Symbols
-
Edit Smart Group
-
Marker symbol (%1)
-
Line symbol (%1)
-
Fill symbol (%1)
-
Color ramp (%1)
-
Gradient
-
Random
-
ColorBrewer
-
cpt-city
-
new symbol
-
new marker
-
new line
-
new fill symbol
-
Symbol Name
-
Please enter a name for new symbol:
-
Save symbol
-
Cannot save symbol without name. Enter a name.
-
Symbol with name '%1' already exists. Overwrite?
-
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Color Ramp Name
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Cannot save color ramp without name. Enter a name.
-
Save color ramp
-
Color ramp with name '%1' already exists. Overwrite?
-
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
-
Invalid selection
-
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
Error!
-
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
Database Error
- خطأ فى قواعد البيانات
+
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Add Group
-
Remove Group
-
Apply Group
-
Un-group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
@@ -48147,57 +47913,57 @@ There was a problem with your symbol database.
Style Manager
-
Marker
-
Line
- خطوط
+
Fill
-
Color ramp
- تدرج الألوان
+
Tags
-
Add item
-
Edit item
-
Edit
- تعديل
+
Remove item
-
Share
-
@@ -48205,51 +47971,51 @@ There was a problem with your symbol database.
Select vector layers to add...
-
Layer ID
-
Layer name
-
Number of features
-
Geometry type
-
Select raster layers to add...
-
Select layers to add...
-
Type
- نوع
+
Select All
-
@@ -48257,12 +48023,12 @@ There was a problem with your symbol database.
Select layers to load
-
1
- 1
+
@@ -48270,22 +48036,22 @@ There was a problem with your symbol database.
SVG annotation
- شرح SVG
+
Delete
- إلغاء
+
Select SVG file
-
SVG files
-
@@ -48293,23 +48059,23 @@ There was a problem with your symbol database.
SVG request failed [error: %1 - url: %2]
-
SVG
- SVG
+
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -48317,17 +48083,17 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48337,64 +48103,64 @@ There was a problem with your symbol database.
Millimeter
-
Map unit
-
Select SVG file
-
SVG files
-
Border width
-
Angle
- زاوية
+
Offset
-
SVG file
-
Color
-
Border color
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -48402,12 +48168,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -48415,17 +48181,17 @@ There was a problem with your symbol database.
Select SVG file
-
SVG files
-
File not found
-
@@ -48433,17 +48199,17 @@ There was a problem with your symbol database.
Size
- حجم
+
area
- المنطقة
+
diameter
-
@@ -48451,7 +48217,7 @@ There was a problem with your symbol database.
Layer %1
-
@@ -48459,17 +48225,17 @@ There was a problem with your symbol database.
Symbol Levels
-
Enable symbol levels
-
Define the order in which the symbol layers are rendered. The numbers in the cells define in which rendering pass the layer will be drawn.
-
@@ -48477,27 +48243,27 @@ There was a problem with your symbol database.
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
@@ -48505,42 +48271,42 @@ There was a problem with your symbol database.
Symbol selector
-
Add symbol layer
-
Remove symbol layer
-
Lock layer's color
-
Move up
-
Move down
-
Save symbol
-
Save
- احفظ
+
@@ -48548,42 +48314,42 @@ There was a problem with your symbol database.
Millimeter
-
Map unit
-
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
Transparency %1%
-
@@ -48591,18 +48357,18 @@ There was a problem with your symbol database.
Linear
-
Clough-Toucher (cubic)
-
Save triangulation to file
-
@@ -48610,27 +48376,27 @@ There was a problem with your symbol database.
Triangle based interpolation
-
Interpolation method
-
Export triangulation to shapefile after interpolation
-
Output file
- ملف الإخراج
+
...
- ...
+
@@ -48638,12 +48404,12 @@ There was a problem with your symbol database.
Delete
- إلغاء
+
Select font color
-
@@ -48651,17 +48417,17 @@ There was a problem with your symbol database.
Annotation text
-
B
-
I
-
@@ -48669,17 +48435,17 @@ There was a problem with your symbol database.
Form
- شكل
+
Multiline
-
HTML
-
@@ -48687,12 +48453,12 @@ There was a problem with your symbol database.
Form
- شكل
+
Tile scale
-
@@ -48700,172 +48466,172 @@ There was a problem with your symbol database.
QGIS Publications
-
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
Become an QGIS translator
-
QGIS Mailing lists
-
Is it 'QGIS' or 'Quantum GIS'?
-
QGIS is open source
-
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
Moving Elements and Maps in the Print Composer
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -48873,12 +48639,12 @@ There was a problem with your symbol database.
&Previous
-
&Next
-
@@ -48886,21 +48652,21 @@ There was a problem with your symbol database.
QGIS Tips!
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
-
I've had enough tips, don't show this on start up any more!
-
@@ -48908,42 +48674,42 @@ p, li { white-space: pre-wrap; }
Dialog
- حوار
+
Select transformation type:
-
Linear
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin plate spline (TPS)
-
Generate ESRI world file (.tfw)
-
@@ -48951,54 +48717,54 @@ p, li { white-space: pre-wrap; }
Transformation settings
-
Transformation type:
-
Resampling method:
-
Nearest neighbour
-
Linear
-
Cubic
- مُكعب
+
Cubic Spline
-
Lanczos
-
Compression:
-
Output raster:
-
...
- ...
+
Target SRS:
-
Generate pdf report:
-
Set Target Resolution
-
Horizontal
- أفقي
+
Vertical
- عمودي
+
Create world file
-
Generate pdf map:
-
Use 0 for transparency when needed
-
Load in QGIS when done
-
Helmert
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin Plate Spline
-
Projective
-
Info
- معلومات
+
Please set output name
-
%1 requires at least %2 GCPs. Please define more
-
Invalid output file name
-
Save raster
-
Select save PDF file
-
PDF Format
- التنسيق PDF
+
_modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -49134,17 +48900,17 @@ p, li { white-space: pre-wrap; }
Form
- شكل
+
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Editable
- قابل للتحرير
+
@@ -49152,12 +48918,12 @@ p, li { white-space: pre-wrap; }
Form
- شكل
+
Adjust scaling range
-
@@ -49165,18 +48931,18 @@ p, li { white-space: pre-wrap; }
Select a file
-
Error
- خطأ
+
Could not open file %1
Error was:%2
-
@@ -49184,37 +48950,37 @@ Error was:%2
Form
- شكل
+
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
-
Value
- قيمة
+
Description
- الوصف
+
Remove Selected
-
@@ -49222,7 +48988,7 @@ Error was:%2
Edit filter expression
-
@@ -49230,52 +48996,52 @@ Error was:%2
Form
- شكل
+
Select layer, key column and value column
-
Layer
- طبقة
+
Key column
- العمود المفتاح
+
Value column
-
Allow null value
-
Order by value
-
Allow multiple selections
-
Filter expression
-
...
- ...
+
@@ -49283,7 +49049,7 @@ Error was:%2
(no selection)
-
@@ -49291,22 +49057,22 @@ Error was:%2
ColorBrewer ramp
-
Scheme name
-
Colors
-
Preview
- معاينة
+
@@ -49314,57 +49080,57 @@ Error was:%2
Codec %1 not found. Falling back to system locale
-
Add Features
-
Delete Features
-
Change Attribute Values
-
Add Attributes
-
Delete Attributes
-
Create Spatial Index
-
Fast Access to Features at ID
-
Change Geometries
-
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -49372,27 +49138,27 @@ Error was:%2
X attribute
-
Y attribute
-
Length attribute
-
Angle attribute
-
Height attribute
-
@@ -49400,46 +49166,46 @@ Error was:%2
Discrete
-
Continuous
-
Gradient file : %1
-
License file : %1
-
Edit Stop Color
-
Offset of the stop
-
Please enter offset in percents (%) of the new stop
-
Add Color Stop
-
@@ -49447,63 +49213,63 @@ Error was:%2
Gradient color ramp
-
Color 1
-
Color 2
-
Change...
- تغير...
+
Type
- نوع
+
Multiple stops
-
Add stop
-
Remove stop
-
Color
-
Offset (%)
-
Preview
- معاينة
+
Information
- معلومة
+
@@ -49511,150 +49277,150 @@ Error was:%2
Updating feature count for layer %1
-
Abort
- إجهاض
+
ERROR: no provider
-
ERROR: layer not editable
-
Commit errors:
%1
-
General
-
Layer comment
-
Storage type of this layer
-
Description of this provider
-
Source for this layer
-
Geometry type of the features in this layer
-
Primary key attributes
-
The number of features in this layer
-
Editing capabilities of this layer
-
Extents
- الامتدادات
+
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
Error: qgis element could not be found
-
xMin,yMin %1,%2 : xMax,yMax %3,%4
-
unknown extent
-
(Invalid transformation of layer extents)
-
Field
-
Type
- نوع
+
Length
- طول
+
Precision
- دقة
+
Comment
- التعليق
+
@@ -49663,206 +49429,115 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
-
+
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
-
+
SUCCESS: %n attribute(s) added.
added attributes count
-
-
+
ERROR: %n new attribute(s) not added
not added attributes count
-
-
+
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
-
+
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
-
+
SUCCESS: %n feature(s) deleted.
deleted features count
-
-
+
ERROR: %n feature(s) not deleted.
not deleted features count
-
-
+
SUCCESS: %n feature(s) added.
added features count
-
-
+
ERROR: %n feature(s) not added.
not added features count
-
-
+
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
-
+
ERROR: %n geometries not changed.
not changed geometries count
-
-
+
Provider errors:
-
@@ -49872,99 +49547,99 @@ Error was:%2
QGIS Layer Style File
-
SLD File
-
Load from file
-
Load from database
-
Save in database (%1)
-
Layer Properties - %1
-
Stop editing mode to enable this.
-
Insert expression
- إدراج إستثناء
+
This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
-
The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
-
Not supported
-
Spatial Index
-
Creation of spatial index successful
-
Creation of spatial index failed
-
Load default style from:
-
Cancel
- إالغاء
+
Local database
-
Datasource database
-
Default Style
-
Loaded from Provider
-
No default style was found for this layer
-
Save default style to:
-
Load layer properties from style file
-
Load Style
-
Style saved
-
Save layer properties as style file
-
Saved Style
-
Error occured retrieving styles from database
-
The retrieved style is not a valid named style. Error message: %1
-
Save Style
-
@@ -50037,349 +49712,349 @@ Error was:%2
Layer Properties
- خصائص الطبقة
+
Restore Default Style
-
Save As Default
-
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
Description
- الوصف
+
Keyword list
-
DataUrl
-
Format
- التنسيق
+
Attribution
-
Url
-
MetadataUrl
-
Type
- نوع
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
- خصائص
+
Load Style ...
-
Save Style ...
-
Style
- نمط
+
Labels
-
Labels (deprecated)
-
Display labels
-
Fields
-
General
-
Specify the coordinate reference system of the layer's geometry.
-
Query Builder
-
Display
- عرض
+
Rendering
-
Layer info
-
Layer source
-
Data source encoding
-
Coordinate reference system
-
Specify...
-
Create spatial index
- بناء فهرس مكانى
+
Update extents
-
Scale dependent visibility
-
Feature subset
-
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
-
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Map Tip display text
-
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
-
Inserts the selected field into the action
-
Insert field
- إدخال الحقل
+
HTML
-
Field
-
Layer name
-
displayed as
-
Metadata
- بيانات وصفية
+
Title
- عنوان
+
Abstract
-
Actions
-
Joins
-
Join layer
- انضمام الطبقة
+
Join field
- انضمام حقل
+
Target field
- الحفل الهدف
+
Diagrams
-
@@ -50387,48 +50062,48 @@ Error was:%2
Layer CRS
- طبقة CRS
+
Project CRS
- مشروع CRS
+
Selected CRS
-
No symbology
-
Feature symbology
-
Symbol layer symbology
-
<Default>
-
Save layer as...
-
Select the coordinate reference system for the vector file. The data points will be transformed from the layer coordinate reference system.
-
@@ -50436,93 +50111,93 @@ Error was:%2
Save vector layer as...
-
Browse
- استعرض
+
Encoding
- ترميز
+
CRS
- CRS
+
Symbology export
-
Datasource Options
-
Custom Options
-
Layer Options
-
Save as
-
Format
- التنسيق
+
Save only selected features
-
Data source
- مصدر البيانات
+
Layer
- طبقة
+
This allows one to surpress attribute creation as some OGR drivers (eg. DGN, DXF) don't support it.
-
Skip attribute creation
-
Add saved file to map
-
1:
- 1:
+
Scale
- مقياس
+
@@ -50530,46 +50205,46 @@ Error was:%2
Random color ramp
-
Hue
-
from
-
to
-
Saturation
-
Value
- قيمة
+
Classes
-
Preview
- معاينة
+
@@ -50577,12 +50252,12 @@ Error was:%2
Edit...
-
Delete
- إلغاء
+
@@ -50590,7 +50265,7 @@ Error was:%2
New Connection...
-
@@ -50598,12 +50273,12 @@ Error was:%2
Select a layer
-
No CRS selected
-
@@ -50611,7 +50286,7 @@ Error was:%2
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -50619,17 +50294,17 @@ Error was:%2
Edit...
-
Delete
- إلغاء
+
Modify WFS connection
-
@@ -50637,52 +50312,52 @@ Error was:%2
DescribeFeatureType failed for url %1
-
WFS
- WFS
+
unknown
-
received %1 bytes from %2
-
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
@@ -50690,12 +50365,12 @@ Error was:%2
New Connection...
-
Create a new WFS connection
-
@@ -50703,77 +50378,77 @@ Error was:%2
&Add
- &أضف
+
&Build query
-
Build query
-
Network Error
-
Capabilities document is not valid
-
Server Exception
-
Error
- خطأ
+
No Layers
-
capabilities document contained no layers.
-
Create a new WFS connection
-
Modify WFS connection
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Load connections
-
XML files (*.xml *XML)
-
@@ -50781,78 +50456,78 @@ Error was:%2
Add WFS Layer from a Server
-
Filter:
-
Display WFS FeatureTypes containing this word in the title, name or abstract
-
Server connections
-
C&onnect
-
&New
-
Edit
- تعديل
+
Delete
- إلغاء
+
Load connections from file
-
Load
-
Save connections to file
-
Save
- احفظ
+
Use title for layer name
-
Coordinate reference system
-
Change ...
-
@@ -50860,7 +50535,7 @@ Error was:%2
WMS Password for %1
-
@@ -50868,27 +50543,27 @@ Error was:%2
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
Edit...
-
Delete
- إلغاء
+
@@ -50896,7 +50571,7 @@ Error was:%2
New Connection...
-
@@ -50904,177 +50579,156 @@ Error was:%2
&Add
- &أضف
+
Add selected layers to map
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- تأكيد الإلغاء
+
Load connections
-
XML files (*.xml *XML)
-
encoding %1 not supported.
-
WMS Provider
-
Failed to parse WMS URI
-
Failed to download capabilities:
-
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
-
+
Select layer(s)
-
Select layer(s) or a tileset
-
Select either layer(s) or a tileset
-
Coordinate Reference System (%n available)
crs count
-
-
+
No common CRS for selected layers.
-
No CRS selected
-
No image encoding selected
-
%n Layer(s) selected
selected layer count
-
-
+
Tileset selected
-
Could not understand the response. The %1 provider said:
%2
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
The %1 connection already exists. Do you want to overwrite it?
-
Confirm Overwrite
-
@@ -51082,52 +50736,52 @@ Error was:%2
Ready
- الجاهز
+
Layers
- طبقات
+
C&onnect
-
&New
-
Edit
- تعديل
+
Delete
- إلغاء
+
Adds a few example WMS servers
-
Add default servers
-
ID
- المعرف
+
Name
-
Title
- عنوان
+
Abstract
-
Image encoding
-
Save connections to file
-
Save
- احفظ
+
Load connections from file
-
Load
-
Options
-
Layer name
-
Coordinate Reference System
-
Add Layer(s) from a WM(T)S Server
-
Change ...
-
Tile size
-
Feature limit for GetFeatureInfo
-
10
- 10
+
Layer Order
-
Move selected layer UP
-
Up
- أعلى
+
Move selected layer DOWN
-
Down
- أسفل
+
Layer
- طبقة
+
Style
- نمط
+
Tilesets
-
Format
- التنسيق
+
Tileset
-
CRS
- CRS
+
Server Search
-
Search
-
Description
- الوصف
+
URL
- الرابط
+
Add selected row to WMS list
-
@@ -51295,49 +50949,49 @@ Error was:%2
empty capabilities document
-
Tried URL: %1
-
Capabilities request redirected.
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
WCS
- WCS
+
%1 of %2 bytes of capabilities downloaded.
-
Exception
-
Could not get WCS capabilities: %1
-
Dom Exception
-
Version not supported
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -51383,7 +51037,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
- WCS
+
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51460,27 +51114,27 @@ Response was:
Cannot describe coverage
-
Coverage not found
-
Cannot calculate extent
-
Cannot get test dataset.
-
Received coverage has wrong extent %1 (expected %2)
-
WCS
- WCS
+
Rotating raster
-
Block read OK
-
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
Getting map via WCS.
-
No data received
-
Cannot create memory file
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request is for a Coverage not offered by the service instance.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
(No error code was reported)
-
(Unknown error code)
-
The WCS vendor also reported:
-
composed error message '%1'.
-
Cannot verify coverage full extent: %1
-
Property
-
Value
- قيمة
+
Name (identifier)
-
Title
- عنوان
+
Abstract
-
Fixed Width
-
Fixed Height
-
Native CRS
-
Native Bounding Box
-
WGS 84 Bounding Box
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in format
-
Coverages
-
Cache Stats
-
Server Properties
-
Keywords
-
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
GetCapabilitiesUrl
-
Get Coverage Url
-
<font color="red">(advertised but ignored)</font>
-
And %1 more coverages
-
Format not supported
-
Read data error
-
RasterIO error:
-
@@ -51779,12 +51426,12 @@ Response was:
...
- ...
+
Select a file
-
@@ -51792,22 +51439,22 @@ Response was:
Form
- شكل
+
Field contains a filename or URL for a webpage
-
Width
- عرض
+
Height
- ارتفاع
+
@@ -51815,33 +51462,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
-
Capabilities request redirected.
-
Redirect loop detected: %1
-
WMS
- WMS
+
empty of capabilities: %1
-
Download of capabilities failed: %1
-
@@ -51849,7 +51496,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51897,22 +51544,22 @@ Response was:
Cannot parse URI
-
Cannot calculate extent
-
Cannot set CRS
-
Number of layers and styles don't match
-
WMS
- WMS
+
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
Getting map via WMS.
-
Getting tiles.
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
image is NULL
-
unexpected image size
-
Status: %1
Reason phrase: %2
-
Redirect loop detected: %1
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request contains a CRS not offered by the server for one or more of the Layers in the request.
-
Request contains a SRS not offered by the server for one or more of the Layers in the request.
-
GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
-
Request is for a Layer in a Style not offered by the server.
-
GetFeatureInfo request is applied to a Layer which is not declared queryable.
-
GetFeatureInfo request contains invalid X or Y value.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
-
Request contains an invalid sample dimension value.
-
Request is for an optional operation that is not supported by the server.
-
(No error code was reported)
-
(Unknown error code)
-
The WMS vendor also reported:
-
Property
-
Value
- قيمة
+
Name
-
Visibility
-
Visible
-
Hidden
-
Title
- عنوان
+
Abstract
-
Can Identify
-
Yes
-
No
-
Can be Transparent
-
Can Zoom In
-
Cascade Count
-
Fixed Width
-
Fixed Height
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in style
-
LegendURLs
-
Server Properties
-
Selected Layers
-
Other Layers
-
Tile Layer Properties
-
Cache Stats
-
WMS Version
-
Keywords
-
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
Identify Formats
-
Layer Count
-
Tile Layer Count
-
GetCapabilitiesUrl
-
GetMapUrl
-
<font color="red">(advertised but ignored)</font>
-
GetFeatureInfoUrl
-
GetLegendGraphic
-
GetTileUrl
-
Tile templates
-
FeatureInfo templates
-
Tileset Properties
-
Identifier
-
Tile mode
-
WMTS
-
WMS-C
-
Invalid tile mode
-
Selected
-
Available Styles
-
CRS
- CRS
+
Bounding Box
-
Available Tilesets
-
Selected tile matrix set
-
Scale
- مقياس
+
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
Width
- عرض
+
Height
- ارتفاع
+
Top
- الأعلى
+
Left
- اليسار
+
Bottom
- الأسفل
+
Right
- اليمين
+
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Cache stats
-
Hits
-
Misses
-
Errors
-
Format not supported
-
Context not fully specified (extent was defined but width and/or height was not).
-
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
GML schema is not valid
-
GML is not valid
-
Cannot identify
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
identify request redirected.
-
Map getfeatureinfo error %1: %2
-
Cannot parse getfeatureinfo: %1
-
Map getfeatureinfo error: %1 [%2]
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52638,18 +52236,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -52744,28 +52314,28 @@ Reason phrase: %2
Select dimensions
-
Dimension
-
Value
- قيمة
+
Abstract
-
Default
- افتراضي
+
@@ -52773,22 +52343,22 @@ Reason phrase: %2
Dialog
- حوار
+
Raster layer:
-
Polygon layer containing the zones:
-
Output column prefix:
-
@@ -52798,17 +52368,17 @@ Reason phrase: %2
&Zonal statistics
-
Calculating zonal statistics...
-
Abort...
- إجهاض...
+
@@ -52816,7 +52386,7 @@ Reason phrase: %2
Record Metadata
-
@@ -52824,17 +52394,17 @@ Reason phrase: %2
Export feature
-
Select destination layer
-
New temporary layer
-
@@ -52842,93 +52412,93 @@ Reason phrase: %2
Transportation layer
-
Layer
- طبقة
+
Direction field
-
Value for forward direction
-
Value for reverse direction
-
Value two-way direction
-
Speed field
-
km/h
-
m/s
-
Default settings
-
Direction
-
Two-way direction
-
Forward direction
-
Reverse direction
-
Cost
-
Line lengths
-
Speed
-
Always use default
-
@@ -52936,42 +52506,42 @@ Reason phrase: %2
Road graph plugin settings
-
Time unit
-
Distance unit
-
Topology tolerance
-
second
-
hour
-
meter
-
kilometer
-
@@ -52979,105 +52549,105 @@ Reason phrase: %2
Shortest path
-
Start
-
Stop
-
Criterion
-
Length
- طول
+
Time
-
Calculate
-
Export
-
Clear
- إزالة
+
Help
- مساعدة
+
Point not selected
-
First, select start and stop points.
-
Plugin isn't configured
-
Plugin isn't configured!
-
Tie point failed
-
Start point doesn't tie to the road!
-
Stop point doesn't tie to the road!
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
Path not found
-
@@ -53085,61 +52655,480 @@ Reason phrase: %2
Settings
- إعدادات
+
Road graph plugin settings
-
Road graph
-
SLDatabase
Run &Vacuum
-
&Database
- &قاعدة بيانات
+
Sorry
- آسف
+
No database selected or you are not connected to it.
-
+
+
+ SaDbTableModel
+
+ Schema
+
+
+ Table
+
+
+ Type
+
+
+ SRID
+
+
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
+
+
+
+ SaNewConnection
+
+ Save connection
+
+
+ Should the existing connection %1 be overwritten?
+
+
+ Failed to load interface
+
+
+ Test connection
+
+
+ Connection to %1 was successful
+
+
+ Connection failed. Check settings and try again.
+
+SQL Anywhere error code: %1
+Description: %2
+
+
+
+ SaNewConnectionBase
+
+ Create a new SQL Anywhere connection
+
+
+ Connection Information
+
+
+ Name
+
+
+ Host
+
+
+ Port
+
+
+ Server
+
+
+ Database
+
+
+ Connection Parameters
+
+
+ Username
+
+
+ Password
+
+
+ Name of the new connection
+
+
+ Name or IP address of computer hosting the database server (leave blank for local connections)
+
+
+ Port number used by the database server (leave blank for default 2638)
+
+
+ Name of the database server (leave blank for default server on host)
+
+
+ Name of the database (leave blank for default database on server)
+
+
+ Additional connection parameters
+
+
+ Database username
+
+
+ Database password
+
+
+ Save the connection username in the registry
+
+
+ Save Username
+
+
+ &Test Connect
+
+
+ Save the connection password in the registry (WARNING: NOT SECURE)
+
+
+ Save Password
+
+
+ Encrypt packets using simple encryption
+
+
+ Simple Encryption
+
+
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
+
+
+ Estimate table metadata
+
+
+ Search for geometry columns in tables owned by other users
+
+
+ Search other users' tables
+
+
+
+ SaSourceSelect
+
+ &Add
+
+
+ &Set Filter
+
+
+ Wildcard
+
+
+ RegExp
+
+
+ All
+
+
+ Schema
+
+
+ Table
+
+
+ Type
+
+
+ SRID
+
+
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
+
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+
+
+ Confirm Delete
+
+
+ Select Table
+
+
+ You must select a table in order to add a layer.
+
+
+ Failed to load interface
+
+
+ Connection failed
+
+
+ Connection to database %1 failed. Check settings and try again.
+
+SQL Anywhere error code: %2
+Description: %3
+
+
+ No accessible tables found
+
+
+ Database connection was successful, but no tables containing geometry columns were %1.
+
+
+ found
+
+
+ found in your schema
+
+
+
+ SaSourceSelectBase
+
+ Add SQL Anywhere layer
+
+
+ SQL Anywhere Connections
+
+
+ Delete
+
+
+ Edit
+
+
+ New
+
+
+ Connect
+
+
+ Search options
+
+
+ Search
+
+
+ Search mode
+
+
+ Search in columns
+
+
+
+ SaveAsPythonScriptAction
+
+ I/O error
+
+
+ Unable to save edits. Reason:
+ %s
+
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
-
I/O error
-
Unable to save edits. Reason:
%s
-
@@ -53147,52 +53136,52 @@ Reason phrase: %2
Select Oracle Spatial GeoRaster
-
Server Connections
-
Edit
- تعديل
+
Delete
- إلغاء
+
&New
-
C&onnect
-
Subdatasets
-
Selection
-
Update
-
Ready
- الجاهز
+
@@ -53200,231 +53189,231 @@ Reason phrase: %2
Editor
-
Auto-save script before running
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
-
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Font
-
Size
- حجم
+
Enable Object Inspector (switching between tabs may be slow)
-
Console
- وحدة التحكم
+
APIs
-
Using preloaded APIs file
-
Path
- مسار
+
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
@@ -53432,17 +53421,40 @@ Reason phrase: %2
Simplify line tolerance
-
Set tolerance
-
OK
-
+
+
+ SqlAnywhere
+
+ Add SQL Anywhere Layer...
+
+
+ Store vector layers within a SQL Anywhere database
+
+
+ Invalid Layer
+
+
+ %1 is an invalid layer and cannot be loaded.
+
@@ -53450,62 +53462,62 @@ Reason phrase: %2
Form
- شكل
+
Unit
-
Opacity
-
Color
-
Open Library
-
Size
- حجم
+
Rotation
-
°
-
Width
- عرض
+
Symbols in group
-
Symbol Name
-
Advanced
- متقدم
+
@@ -53513,18 +53525,18 @@ Reason phrase: %2
TopologyChecker
-
Topology Checker for vector layer
-
&Topology Checker
-
@@ -53532,130 +53544,130 @@ Reason phrase: %2
Undo/Redo
-
Undo
-
Redo
-
ValidateDialog
Check geometry validity
-
Geometry errors
-
Total encountered errors
-
Error!
-
Please specify input vector layer
-
Please specify input field
-
Please specify output shapefile
- الرجاء تحديد شيب فايل الإخراج
+
Cancel
- إالغاء
+
Geometry
- هندسة
+
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Feature
-
Error(s)
-
VisualDialog
Error!
-
Please specify input vector layer
-
Please specify input field
-
List unique values
-
Unique values
-
Total unique values
-
Basics statistics
-
Statistics output
-
Nearest neighbour analysis
-
Nearest neighbour statistics
-
Cancel
- إالغاء
+
Parameter
-
Value
- قيمة
+
@@ -53663,12 +53675,12 @@ Reason phrase: %2
Form
- شكل
+
Force point inside polygon
-
@@ -53676,92 +53688,92 @@ Reason phrase: %2
Form
- شكل
+
Colors
-
Fill
-
Border
-
Left
- اليسار
+
HCenter
-
Right
- اليمين
+
Top
- الأعلى
+
VCenter
-
Bottom
- الأسفل
+
Outline style
-
Outline width
-
Rotation
-
Anchor point
-
Data defined properties...
-
Offset X,Y
-
Symbol width
- عرض الرمز
+
Symbol height
- ارتفاع الرمز
+
@@ -53769,72 +53781,72 @@ Reason phrase: %2
Form
- شكل
+
Offset X,Y
-
Rotation
-
Anchor point
-
Left
- اليسار
+
HCenter
-
Right
- اليمين
+
Top
- الأعلى
+
VCenter
-
Bottom
- الأسفل
+
Size
- حجم
+
Color
-
Font family
-
°
-
@@ -53842,120 +53854,120 @@ Reason phrase: %2
Form
- شكل
+
Two color
-
Color ramp
- تدرج الألوان
+
Gradient type
-
Linear
-
Radial
-
Conical
-
Coord mode
-
Object
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
x
- x
+
y
- y
+
Feature centroid
-
Reference Point 2
-
Angle
- زاوية
+
°
- °
+
Data defined properties...
-
Offset X,Y
-
@@ -53963,27 +53975,27 @@ Reason phrase: %2
Form
- شكل
+
Angle
- زاوية
+
Data defined properties...
-
Distance
-
Offset
-
@@ -53991,57 +54003,57 @@ Reason phrase: %2
Form
- شكل
+
Marker placement
-
with interval
-
on every vertex
-
on last vertex only
-
on first vertex only
-
Offset along line
-
Rotate marker
-
Line offset
-
Data defined properties
-
on central point
-
@@ -54049,32 +54061,32 @@ Reason phrase: %2
Form
- شكل
+
Vertical distance
-
Vertical displacement
-
Data defined properties...
-
Horizontal displacement
-
Horizontal distance
-
@@ -54082,57 +54094,57 @@ Reason phrase: %2
Form
- شكل
+
Border width
-
Rotation
-
Texture width
-
Colors
-
Fill
-
Border
-
Data defined properties...
-
SVG Groups
-
SVG Symbols
-
...
- ...
+
@@ -54140,57 +54152,57 @@ Reason phrase: %2
Form
- شكل
+
Gradient colors
-
Two color
-
Color ramp
- تدرج الألوان
+
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Blur strength
-
Offset X,Y
-
Data defined properties...
-
@@ -54198,52 +54210,52 @@ Reason phrase: %2
Form
- شكل
+
Offset X,Y
-
Border width
-
Fill style
-
Colors
-
Border style
-
Join style
-
Data defined properties...
-
Fill
-
Border
-
@@ -54251,62 +54263,62 @@ Reason phrase: %2
Form
- شكل
+
Color
-
Change
- تغير
+
Pen width
-
Offset
-
Pen style
-
Join style
-
Cap style
-
Use custom dash pattern
-
Dash pattern unit
-
Data defined properties...
-
Draw line only inside polygon
-
@@ -54314,92 +54326,92 @@ Reason phrase: %2
Form
- شكل
+
Size
- حجم
+
Fill
-
Border
-
Outline style
-
Outline width
-
Anchor point
-
Left
- اليسار
+
HCenter
-
Right
- اليمين
+
Top
- الأعلى
+
VCenter
-
Bottom
- الأسفل
+
Data defined properties...
-
Colors
-
Angle
- زاوية
+
°
- °
+
Offset X,Y
-
@@ -54407,97 +54419,97 @@ Reason phrase: %2
Form
- شكل
+
Colors
-
Fill
-
Border
-
Offset X,Y
-
Anchor point
-
Left
- اليسار
+
HCenter
-
Right
- اليمين
+
Top
- الأعلى
+
VCenter
-
Bottom
- الأسفل
+
Data defined properties...
-
Border width
-
Angle
- زاوية
+
Size
- حجم
+
SVG Groups
-
SVG Image
-
...
- ...
+
@@ -54505,32 +54517,32 @@ Reason phrase: %2
Form
- شكل
+
SVG Images
-
SVG Groups
-
...
- ...
+
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
-
@@ -54538,77 +54550,77 @@ Reason phrase: %2
Form
- شكل
+
Y attribute
-
Scale
- مقياس
+
X attribute
-
Vector field type
-
Height only
-
Polar
-
Cartesian
-
Angle units
-
Degrees
-
Radians
-
Angle orientation
-
Counterclockwise from east
-
Clockwise from north
-
Distance unit
-
@@ -54616,17 +54628,17 @@ Reason phrase: %2
XML Request / Response
-
Request
-
Response
-
@@ -54634,12 +54646,12 @@ Reason phrase: %2
QGIS Plugin Template
-
Plugin Template
-
@@ -54647,59 +54659,59 @@ Reason phrase: %2
Topology Checker
-
Validate All
-
Validate Extent
-
Topology not checked yet
-
Configure
-
Show topology errors
-
Show errors
-
Select automatic fix
-
Fix!
-
No errors were found
-
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
Abort
- إجهاض
+
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -54909,7 +54921,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -54919,7 +54931,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -56344,13 +56434,13 @@ Click on one of the icons along the top of the composer window to select what ty
Converts DXF files in Shapefile format
-
&Dxf2Shp
-
@@ -56358,69 +56448,69 @@ Click on one of the icons along the top of the composer window to select what ty
Dxf Importer
-
Input and output
-
Input DXF file
-
...
- ...
+
Output file
- ملف الإخراج
+
Export text labels
-
Output file type
-
Polyline
-
Polygon
- مضلعات
+
Point
- نقاط
+
Warning
-
Please specify a file to convert.
-
Please specify an output file
-
Choose a DXF file to open
-
DXF files
-
Choose a file name to save to
-
Shapefile
-
@@ -56463,32 +56553,32 @@ For support send a mail to scala@itc.cnr.it
eVis Database Connection
-
eVis Event Id Tool
-
eVis Event Browser
-
Create layer from a database query
-
Open an Event Browers and display the selected feature
-
Open an Event Browser to explore the current layer's features
-
@@ -56497,12 +56587,12 @@ For support send a mail to scala@itc.cnr.it
Undefined
-
No predefined queries loaded
-
Open File
-
New Database connection requested...
-
Error: You must select a database type
-
Error: No host name entered
-
Error: No database name entered
-
Connection to [%1.%2] established
-
connected
-
Tables
-
Connection to [%1.%2] failed: %3
-
Error: Parse error at line %1, column %2: %3
-
Error: Unabled to open file [%1]
-
Error: Query failed: %1
-
Error: Could not create temporary file, process halted
-
Error: A database connection is not currently established
-
@@ -56585,145 +56675,145 @@ For support send a mail to scala@itc.cnr.it
Database Connection
-
Predefined Queries
-
Load predefined queries
-
Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide.
-
The description of the selected query.
-
Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
-
not connected
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
-
Database Host
-
Enter the database host. If the database resides on your desktop you should enter ¨localhost¨. If you selected ¨MSAccess¨ as the database type this option will not be available.
-
Password to access the database.
-
Enter the name of the database.
-
Username
- إسم المستخدم
+
Enter the port through which the database must be accessed if a MYSQL database is used.
-
Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established.
-
Connect
-
User name to access the database.
-
Select the type of database from the list of supported databases in the drop-down menu.
-
Database Name
-
Password
- كلمة السر
+
Database Type
-
Port
-
SQL Query
-
Run the query entered above. The status of the query will be displayed in the Output Console below.
-
Run Query
-
Enter the query you want to run in this window.
-
A window for status messages to be displayed.
-
Output Console
-
@@ -56731,37 +56821,37 @@ p, li { white-space: pre-wrap; }
Database File Selection
-
The name of the field that contains the Y coordinate of the points.
-
The name of the field that contains the X coordinate of the points.
-
Enter the name for the new layer that will be created and displayed in QGIS.
-
Y Coordinate
-
X Coordinate
-
Name of New Layer
-
@@ -56769,17 +56859,17 @@ p, li { white-space: pre-wrap; }
Generic Event Browser
-
Field
-
Value
- قيمة
+
Warning
-
This tool only supports vector data
- هذه الأداة تدعم فقط بيانات الطبقة الخطية
+
No active layers found
- لا توجد طبقات نشطة
+
Error
- خطأ
+
Unable to connect to either the map canvas or application interface
-
An invalid feature was received during initialization
-
Event Browser - Displaying records 01 of %1
-
Attribute Contents
-
Event Browser - Displaying records %1 of %2
-
Select Application
-
All ( * )
-
@@ -56849,82 +56939,82 @@ p, li { white-space: pre-wrap; }
Display
- عرض
+
Use the Previous button to display the previous photo when more than one photo is available for display.
-
Previous
-
Use the Next button to display the next photo when more than one photo is available for display.
-
Next
-
All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green.
-
1
- 1
+
Image display area
-
Display area for the image.
-
Options
-
File path
-
Attribute containing path to file
-
Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
-
If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
-
Path is relative
-
If checked, the relative path values will be saved for the next session.
-
Remember this
-
Reset to default
-
Resets the values on this line to the default setting.
-
Reset
- إعادة ضبط
+
Compass bearing
-
Attribute containing compass bearing
-
Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
-
If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
-
Display compass bearing
-
If checked, the Display Compass Bearing values will be saved for the next session.
-
Compass offset
-
Define the compass offset manually.
-
Manual
-
A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
Define the compass offset using a field from the vector layer attribute table.
-
From Attribute
-
Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
If checked, the compass offset values will be saved for the next session.
-
Resets the compass offset values to the default settings.
-
Relative paths
-
The base path or url from which images and documents can be “relative”
-
Base Path
-
The Base Path onto which the relative path defined above will be appended.
-
If checked, the Base Path will be saved for the next session.
-
Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
-
If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
-
Replace entire path/url stored in image path attribute with user defined
Base Path (i.e. keep only filename from attribute)
-
If checked, the current check-box setting will be saved for the next session.
-
Clears the check-box on this line.
-
If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
-
Apply Path to Image rules when loading docs in external applications
-
Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
-
Configure External Applications
-
File extension and external application in which to load a document of that type
-
A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
-
Extension
-
Application
-
Add new file type
-
Add a new file type with a unique extension and the path for the application that can open the file.
-
Delete current row
-
Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
-
@@ -57157,234 +57247,234 @@ Base Path (i.e. keep only filename from attribute)
Zoom in
- تكبير
+
Zoom in to see more detail.
-
Zoom out
- تصغير
+
Zoom out to see more area.
-
Zoom to full extent
-
Zoom to display the entire image.
-
fTools
QGIS version detected:
-
This version of fTools requires at least QGIS version 1.0.0
Plugin will not be enabled.
-
&Analysis Tools
-
Distance matrix
- المسافة كمصفوفة
+
Sum line lengths
- مجموع أطوال الخطوط
+
Points in polygon
-
Basic statistics
-
List unique values
-
Nearest neighbour analysis
-
Mean coordinate(s)
-
Line intersections
- تقاطع خطوط
+
&Research Tools
-
Random selection
- الإختيار العشوائى
+
Random selection within subsets
- اختيار عشوائي داخل مجموعات فرعية
+
Random points
-
Regular points
- نقاط منتظمة
+
Vector grid
- نقاط منتظمة
+
Select by location
- الإختيار مكانياً
+
Polygon from layer extent
- المضلع من إمتداد لطبقة
+
&Geoprocessing Tools
-
Convex hull(s)
- هيكل محدب (ج)
+
Buffer(s)
- مخزن(ج)
+
Intersect
- تقاطع
+
Union
- اتحاد
+
Symetrical difference
-
Clip
- مقطع
+
Dissolve
- حل
+
Difference
- اختلاف
+
Eliminate sliver polygons
- حذف المضلعات الفضية
+
G&eometry Tools
-
Export/Add geometry columns
- إضافة/إخراج أعمدة هندسية
+
Check geometry validity
-
Polygon centroids
- مركز ثقل المضلع
+
Delaunay triangulation
- تثليث ديلاوني
+
Voronoi Polygons
-
Extract nodes
- استخراج العقد
+
Simplify geometries
- تبسيط الهندسات
+
Densify geometries
- هندس, الكثافة
+
Multipart to singleparts
- من عدة أجزاء إلى جزء مجزء
+
Singleparts to multipart
- من جزء مجزء إلى عدة أجزاء
+
Polygons to lines
- مضلعات إلى خطوط
+
Lines to polygons
- من خطوط إلى مضلعات
+
&Data Management Tools
-
Define current projection
- تعريف المسقط الحالى
+
Join attributes by location
- ضم البيانات الوصفية مكانياً
+
Split vector layer
- شق طبقة خطية
+
Merge shapefiles to one
-
Create spatial index
- بناء فهرس مكانى
+
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -57400,1857 +57490,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -59303,10 +59339,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59320,10 +59356,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -59344,10 +59380,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -59360,12 +59396,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -59381,16 +59417,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -59419,15 +59455,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -59444,17 +59480,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -59468,17 +59504,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -59494,16 +59530,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -59517,10 +59553,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -59533,10 +59569,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -59550,12 +59586,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -59569,12 +59605,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -59589,17 +59625,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -59609,10 +59645,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -59627,12 +59663,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -59646,12 +59682,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -59665,10 +59701,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -59685,12 +59721,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -59704,17 +59740,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -59729,10 +59765,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -59743,12 +59779,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -59762,17 +59798,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -59785,12 +59821,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -59807,14 +59843,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -59828,15 +59864,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -59845,15 +59881,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -59884,14 +59920,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -59910,14 +59946,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -60022,12 +60058,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -60041,10 +60077,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -60058,10 +60094,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -60078,10 +60114,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -60097,36 +60133,36 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
geometryThread
Merge all
- دمج الجميع
+
Polygon area
-
Polygon perimeter
-
Line length
-
Point x ordinate
-
Point y ordinate
-
@@ -60134,2235 +60170,2235 @@ Returns a string representation of a color based on its hue, saturation, value a
(1-256)
-
(Optional) column to read labels
-
3D-Viewer (NVIZ)
-
3d Visualization
-
Add a value to the current category values
-
Add elements to layer (ALL elements of the selected layer type!)
-
Add missing centroids to closed boundaries
-
Add one or more columns to attribute table
-
Allocate network
-
Assign constant value to column
-
Assign new constant value to column only if the result of query is TRUE
-
Assign new value as result of operation on columns to column in attribute table
-
Assign new value to column as result of operation on columns only if the result of query is TRUE
-
Attribute field
-
Attribute field (interpolated values)
-
Attribute field to (over)write
-
Attribute field to join
-
Auto-balancing of colors for LANDSAT-TM raster
-
Bicubic or bilinear spline interpolation with Tykhonov regularization
-
Bilinear interpolation utility for raster maps
-
Blend color components for two rasters by given ratio
-
Blend red, green, raster layers to obtain one color raster
-
Break (topologically clean) polygons (imported from non topological format, like ShapeFile). Boundaries are broken on each point shared between 2 and more polygons where angles of segments are different
-
Break lines at each intersection of vector
-
Brovey transform to merge multispectral and high-res panchromatic channels
-
Buffer
-
Build polylines from lines
-
Calculate average of raster within areas with the same category in a user-defined base map
-
Calculate covariance/correlation matrix for user-defined rasters
-
Calculate error matrix and kappa parameter for accuracy assessment of classification result
-
Calculate geometry statistics for vectors
-
Calculate linear regression from two rasters: y = a + b*x
-
Calculate median of raster within areas with the same category in a user-defined base map
-
Calculate mode of raster within areas with the same category in a user-defined base map
-
Calculate optimal index factor table for LANDSAT-TM raster
-
Calculate raster surface area
-
Calculate shadow maps from exact sun position
-
Calculate shadow maps from sun position determinated by date/time
-
Calculate statistics for raster
-
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Category or object oriented statistics
-
Cats
-
Cats (select from the map or using their id)
-
Change category values and labels
-
Change field
-
Change layer number
-
Change resolution
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Change the type of geometry elements
-
Choose appropriate format
-
Columns management
-
Compares bit patterns with raster
-
Compress and decompress raster
-
Compress raster
-
Computes a coordinate transformation based on the control points
-
Concentric circles
-
Connect nodes by shortest route (traveling salesman)
-
Connect selected nodes by shortest tree (Steiner tree)
-
Connect vector to database
-
Convert 2D vector to 3D by sampling raster
-
Convert 2D vector to 3D vector by sampling of elevation raster. Default sampling by nearest neighbour
-
Convert GRASS binary vector to GRASS ASCII vector
-
Convert a raster to vector within GRASS
-
Convert a vector to raster within GRASS
-
Convert bearing and distance measurements to coordinates and vice versa
-
Convert boundaries to lines
-
Convert centroids to points
-
Convert coordinates
-
Convert coordinates from one projection to another (cs2cs frontend)
-
Convert lines to boundaries
-
Convert points to centroids
-
Convert raster to vector areas
-
Convert raster to vector lines
-
Convert raster to vector points
-
Convert vector to raster using attribute values
-
Convert vector to raster using constant
-
Convex hull
-
Copy a table
-
Copy also attribute table (only the table of layer 1 is currently supported)
-
Count of neighbouring points
-
Create 3D volume map based on 2D elevation and value rasters
-
Create a MASK for limiting raster operation
-
Create a map containing concentric rings
-
Create a raster plane
-
Create and add new table to vector
-
Create and/or modify raster support files
-
Create aspect raster from DEM (digital elevation model)
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create grid in current region
-
Create new GRASS location and transfer data into it
-
Create new GRASS location from metadata file
-
Create new GRASS location from raster data
-
Create new GRASS location from vector data
-
Create new layer with category values based upon user's reclassification of categories in existing raster
-
Create new location from .prj (WKT) file
-
Create new raster by combining other rasters
-
Create new vector by combining other vectors
-
Create new vector with current region extent
-
Create nodes on network
-
Create parallel line to input lines
-
Create points
-
Create points along input lines
-
Create points/segments from input vector lines and positions
-
Create quantization file for floating-point raster
-
Create random 2D/3D vector points
-
Create random cell values with spatial dependence
-
Create random points
-
Create random raster
-
Create random vector point contained in raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create shaded map
-
Create slope raster from DEM (digital elevation model)
-
Create standard vectors
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
DXF vector layer
-
Database
-
Database connection
-
Database file
-
Database management
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Develop map
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector attributes
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
E00 vector layer
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export from GRASS
-
Export raster as non-georeferenced PNG image format
-
Export raster from GRASS
-
Export raster series to MPEG movie
-
Export raster to 8/24bit TIFF image at the resolution of the current region
-
Export raster to ASCII text file
-
Export raster to ESRI ARCGRID
-
Export raster to GRIDATB.FOR map file (TOPMODEL)
-
Export raster to Geo TIFF
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to VTK-ASCII
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extract features from vector
-
Extract selected features
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
File management
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Filter image
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Help
- مساعدة
+
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Hydrologic modelling
-
Imagery
-
Import ASCII raster
-
Import DXF vector
-
Import ESRI ARC/INFO ASCII GRID
-
Import ESRI E00 vector
-
Import GDAL supported raster
-
Import GDAL supported raster and create a fitted location
-
Import GRIDATB.FOR (TOPMODEL)
-
Import MapGen or MatLab vector
-
Import OGR vector
-
Import OGR vector and create a fitted location
-
Import OGR vectors in a given data source combining them in a GRASS vector
-
Import SPOT VGT NDVI
-
Import SRTM HGT
-
Import US-NGA GEOnet Names Server (GNS) country file
-
Import all OGR/PostGIS vectors in a given data source and create a fitted location
-
Import attribute tables in various formats
-
Import binary MAT-File(v4)
-
Import binary raster
-
Import from database into GRASS
-
Import geonames.org country files
-
Import into GRASS
-
Import loaded raster
-
Import loaded raster and create a fitted location
-
Import loaded vector
-
Import loaded vector and create a fitted location
-
Import only some layers of a DXF vector
-
Import raster from ASCII polygon/line
-
Import raster from coordinates using univariate statistics
-
Import raster into GRASS
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Input table
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage features
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Network analysis
-
Network maintenance
-
Number of rows to be skipped
-
Others
-
Output GML file
-
Output Shapefile
- إنتاج شيب فايل
+
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Projection conversion of vector
-
Projection management
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster
- طبقة شبكية
+
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reports
-
Reports and statistics
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
-
Split lines to shorter segments
-
Statistics
-
Sum raster cell values
-
Surface management
-
Tables management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Terrain analysis
-
Tests of normality on vector points
-
Text file
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform features
-
Transform image
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
-
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector
- طبقة خطية
+
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
optionsDialog
Warning!
-
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -62370,59 +62406,59 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Current Rules
-
Add Rule
-
Rule
-
Layer #1
-
Layer #2
-
Tolerance
- تحمُل
+
Layer1ID
-
Layer2ID
-
No layer
-
Delete Rule
-
@@ -62430,7 +62466,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid second geometry.
-
Topology plugin
-
Invalid first geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
visualThread
Max. len:
-
Min. len:
-
Mean. len:
-
Filled:
-
Empty:
-
N:
-
Mean:
-
StdDev:
-
Sum:
-
Min:
-
Max:
-
CV:
-
Number of unique values:
-
Range:
-
Median:
-
Observed mean distance:
-
Expected mean distance:
-
Nearest neighbour index:
-
Z-Score:
-
@@ -62630,17 +62666,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- شكل
+
Open number input dialog
-
...
- ...
+
@@ -62648,12 +62684,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- شكل
+
...
- ...
+
-
+
\ No newline at end of file
diff --git a/i18n/qgis_ca.ts b/i18n/qgis_ca.ts
index 40e5cd7fe6e..d086e47822e 100644
--- a/i18n/qgis_ca.ts
+++ b/i18n/qgis_ca.ts
@@ -1,12 +1,10 @@
-
-
-
+
APIsDialogPythonConsole
Generating prepared API file (please wait)...
-
@@ -21,19 +19,19 @@
ConfigDialog
Search...
- Cerca
+ Cerca...
Setting
-
Value
- Valor
+
Providers
- Proveïdors
Wrong value
@@ -42,7 +40,7 @@
Wrong parameter value:
%1
- Valor de paràmetre incorrecte:⏎
+ Valor de paràmetre incorrecte:
%1
@@ -50,7 +48,7 @@
ConnectionItem
Unable to connect
-
@@ -113,90 +111,90 @@
DBManager
Sorry
- Ho sento
+
No database selected or you are not connected to it.
-
Select the table you want export to file.
-
DB Manager
-
Info
- Informació
+
Table
- Taula
+
Preview
-
&Database
- Base de &dades
+
&Schema
-
&Table
-
&Refresh
-
&SQL window
-
&Exit
-
&Import layer/file
-
&Export to file
-
DBManagerPlugin
Sorry
- Ho sento
+
Unable to find a valid unique field
-
Copy
- Copia
+
DB Manager
-
Server version:
-
Host:
-
User:
@@ -204,12 +202,12 @@
Library:
-
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
-
create new schemas
@@ -217,23 +215,23 @@ This table is essential for many GIS applications for enumeration of tables.
create temporary tables
-
Not connected
-
Connection details
-
General info
-
<warning> %s support not enabled!
-
<warning> This user has no privileges!
@@ -245,15 +243,15 @@ This table is essential for many GIS applications for enumeration of tables.
Privileges
-
Owner:
-
Comment:
-
create new objects
@@ -261,11 +259,11 @@ This table is essential for many GIS applications for enumeration of tables.
access objects
-
Schema details
-
<warning> This user has no privileges to access this schema!
@@ -273,123 +271,123 @@ This table is essential for many GIS applications for enumeration of tables.
Relation type:
-
View
- Visualització
+
Table
- Taula
+
Rows:
-
Unknown (<a href="action:rows/count">find out</a>)
-
Name
- Nom
+
Type
- Tipus
+
Null
-
Default
-
Column(s)
-
Function
-
<warning> This is not a spatial table.
-
Fields
-
Constraints
- Restriccions
+
Indexes
- Índexs
+
Triggers
-
View definition
-
Column:
-
Geometry:
-
Dimension:
-
Undefined
-
Spatial ref:
-
Estimated extent:
-
(unknown) (<a href="action:extent/get">find out</a>)
-
Extent:
-
<warning> There isn't entry in geometry_columns!
-
<warning> No spatial index defined (<a href="action:spatialindex/create">create it</a>)
-
Pages:
-
Rows (estimation):
-
Privileges:
-
<warning> This user doesn't have usage privileges for this schema!
@@ -397,7 +395,7 @@ This table is essential for many GIS applications for enumeration of tables.
Rows (counted):
-
<warning> This user has read-only privileges.
@@ -405,101 +403,101 @@ This table is essential for many GIS applications for enumeration of tables.
<warning> There's a significant difference between estimated and real row count. Consider running <a href="action:vacuumanalyze/run">VACUUM ANALYZE</a>.
-
<warning> No primary key defined for this table!
-
Scripts:
-
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
-
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
-
Length
- Longitud
+
Enabled
-
Yes
-
No
-
<a href="action:triggers/enable">Enable all triggers</a> / <a href="action:triggers/disable">Disable all triggers</a>
-
Definition
-
Rules
-
&Versioning
-
&Table
-
"{0}" not found
-
Filename:
-
SQLite version:
-
Error:
%s
-
Query:
%s
-
&Re-connect
-
&Database
- Base de &dades
+
&Create schema
-
&Schema
-
&Delete (empty) schema
@@ -507,11 +505,11 @@ Query:
Delete selected item
-
&Create table
-
&Edit table
@@ -519,7 +517,7 @@ Query:
&Delete table/view
-
&Empty table
@@ -527,15 +525,15 @@ Query:
&Move to schema
-
Cannot delete the selected item.
-
No database selected or you are not connected to it.
-
New schema
@@ -547,113 +545,113 @@ Query:
Select an empty SCHEMA for deletion.
-
hey!
-
Really delete schema %s?
-
Select a TABLE for editation.
-
Select a TABLE/VIEW for deletion.
-
Really delete table/view %s?
-
Select a TABLE to empty it.
-
Really delete all items from table %s?
-
Select a TABLE/VIEW.
-
Do you want to %s all triggers?
-
Table triggers
-
Do you want to %s trigger %s?
-
Table trigger
-
Do you want to %s spatial index for field %s?
-
Spatial Index
-
Check
-
Primary key
- Clau primària
+
Foreign key
-
Unique
- Únic
+
Exclusion
-
Unknown
-
DBModel
Databases
-
Invalid layer
-
Unable to load the layer %s
-
DBTree
Rename
-
Delete
-
Add to canvas
@@ -661,7 +659,7 @@ Query:
Re-connect
-
@@ -1024,12 +1022,12 @@ Query:
Store
-
Delete
-
<html><head/><body><p>Avoid selecting feature by id. Sometimes - especially when running expensive queries/views - fetching the data sequentially instead of fetching features by id can be much quicker.</p></body></html>
-
Avoid selecting by feature id
-
@@ -1529,12 +1527,12 @@ les columnes
Output count field name
-
PNTCNT
-
Unstratified Sampling Design (Entire layer)
-
Stratified Sampling Design (Individual polygons)
-
Initial inset from corner (LH side)
-
Take summary of intersecting features
-
Take attributes of first located feature
-
Only keep matching records
-
Keep all records (including non-matching target records)
-
Random Selection From Within Subsets
-
Input subset field (unique ID field)
-
Sum Line Length In Polygons
-
Output summed length field name
-
There were %d vertices in original dataset which
were reduced to %d vertices after simplification
-
Processing of the following layers/files ended with error:<br><br>
-
Join attributes by location
@@ -2090,9 +2088,9 @@ Això pot provocar resultats inesperats.
Camp longitud
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
-
Split vector layer
@@ -2128,19 +2126,19 @@ Això pot provocar resultats inesperats.
Can't delete file %s
-
Error loading output shapefile:
%s
-
Created output shapefile:
%s
Would you like to add the new layer to the TOC?
-
Please specify input vector layer
@@ -2153,7 +2151,7 @@ Would you like to add the new layer to the TOC?
Defined Projection For:
%s.shp
-
Random Points
@@ -2185,26 +2183,26 @@ Would you like to add the new layer to the TOC?
Selected features: %s
-
Commit error:
%s
-
Could not replace geometry of feature with id %s
-
Could not eliminate features with these ids:
%s
-
Created output shapefile:
%s
-
Line intersections
@@ -2221,7 +2219,7 @@ Would you like to add the new layer to the TOC?
Created output shapefiles in folder:
%s
-
Please specify input unique ID field
@@ -2233,7 +2231,7 @@ Would you like to add the new layer to the TOC?
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Distance matrix
@@ -2299,7 +2297,7 @@ Would you like to add the new layer to the TOC?
There are no shapefiles with the given geometry type. Please select an available geometry type.
-
Delete error
@@ -2367,7 +2365,7 @@ Esteu segur que voleu continuar?
Please specify an input layer
-
Simplify results
@@ -2390,47 +2388,24 @@ Esteu segur que voleu continuar?
elimina de la selecció actual
- Select by location
Selecciona per la ubicació
- Select features in:
Selecciona objectes de:
- that intersect features in:
que s'intersecten objectes en:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Modifica la selecció actual per:
+ Modifica la selecció actual per:
Use selected features only
- Utilitzar només objectes seleccionats
+ Utilitzar només objectes seleccionats
Please specify select layer
@@ -2461,7 +2436,7 @@ Esteu segur que voleu continuar?
DlgAddGeometryColumn
Sorry
- Ho sento
+
field name must not be empty
@@ -2473,32 +2448,32 @@ Esteu segur que voleu continuar?
Autofill settings
-
Autofill mode
-
Do not autofill
-
Fill with numbers
-
Fill with parameter values
-
Parameter to use
-
@@ -2506,7 +2481,7 @@ Esteu segur que voleu continuar?
Processing options
-
DlgCreateIndex
Error
- Error
+
Please enter some name for the index
-
DlgCreateTable
&Create
-
Sorry
- Ho sento
+
no field selected
-
field is at top already
@@ -2545,7 +2520,7 @@ Esteu segur que voleu continuar?
No field selected
-
field is at bottom already
@@ -2553,27 +2528,27 @@ Esteu segur que voleu continuar?
select schema!
-
enter table name!
-
add some fields!
-
set geometry column name
-
Good
-
everything went fine
-
@@ -2584,39 +2559,39 @@ Esteu segur que voleu continuar?
Shapefiles
-
Export to file
-
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
%s
-
Export finished.
-
DlgFieldProperties
Sorry
- Ho sento
+
field name must not be empty
@@ -2632,12 +2607,12 @@ Esteu segur que voleu continuar?
Get scripts and models
-
about:blank
-
@@ -2675,36 +2650,36 @@ Esteu segur que voleu continuar?
DlgImportVector
Choose the file to import
-
Import to database
-
Input layer missing or not valid
-
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
%s
-
Import was successful.
-
@@ -2712,7 +2687,7 @@ Esteu segur que voleu continuar?
Processing modeler
-
...
-
Edit model help
-
Run model
-
Multiple selection
-
@@ -2793,17 +2768,17 @@ Esteu segur que voleu continuar?
Enter number or expression
-
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -2811,17 +2786,17 @@ Esteu segur que voleu continuar?
Dialog
- Diàleg
+
Output
-
Style
-
@@ -2842,7 +2817,7 @@ Esteu segur que voleu continuar?
Script editor
-
...
-
Edit script help
-
Run algorithm
-
Cut
-
Copy
- Copia
+
Paste
-
DlgSqlWindow
%d rows, %.1f seconds
-
Sorry
@@ -2916,50 +2891,50 @@ Esteu segur que voleu continuar?
You must fill the required fields:
geometry column - column with unique integer values
-
DlgTableProperties
Sorry
- Ho sento
+
nothing selected
-
Are you sure
-
really delete column '%s'?
-
really delete constraint '%s'?
-
The selected table has no geometry
-
Create?
-
Create spatial index for field %s?
-
Nothing selected
-
really delete index '%s'?
-
@@ -2967,7 +2942,7 @@ geometry column - column with unique integer values
Add versioning support to a table
-
Field calculator
-
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
-
Input layer
-
Update existing field
-
Output file
- Fitxer de sortida
+
...
-
FieldsCalculatorDialog
[Save to temporary file]
-
Save file
@@ -3100,30 +3075,30 @@ geometry column - column with unique integer values
Unable to execute algorithm
-
Wrong or missing parameter values
-
FileDirectorySelector
...
-
Select directory
-
Select file
-
All files (*.*)
-
@@ -3146,7 +3121,7 @@ geometry column - column with unique integer values
The process crashed some time after starting successfully.
-
An unknown error occurred.
@@ -3160,11 +3135,11 @@ geometry column - column with unique integer values
Unable to load {0} plugin.
The required "{1}" module is missing.
Install it and try again.
-
QGIS version detected:
-
This version of Gdal Tools requires at least QGIS version 1.0.0
@@ -3178,11 +3153,11 @@ El connector no s'habilitarà.
Warp (Reproject)
-
Warp an image into a new coordinate system
-
Assign projection
@@ -3210,7 +3185,7 @@ El connector no s'habilitarà.
Burns vector geometries into a raster
-
Polygonize (Raster to vector)
@@ -3218,7 +3193,7 @@ El connector no s'habilitarà.
Produces a polygon feature layer from a raster
-
Translate (Convert format)
@@ -3234,7 +3209,7 @@ El connector no s'habilitarà.
Convert a 24bit RGB image to 8bit paletted
-
PCT to RGB
@@ -3242,7 +3217,7 @@ El connector no s'habilitarà.
Convert an 8bit paletted image to 24bit RGB
-
Extraction
@@ -3254,11 +3229,11 @@ El connector no s'habilitarà.
Builds vector contour lines from a DEM
-
Clipper
-
Analysis
@@ -3266,7 +3241,7 @@ El connector no s'habilitarà.
Sieve
-
Removes small raster polygons
@@ -3274,19 +3249,19 @@ El connector no s'habilitarà.
Near black
-
Convert nearly black/white borders to exact value
-
Fill nodata
-
Fill raster regions by interpolation from edges
-
Proximity (Raster distance)
@@ -3318,11 +3293,11 @@ El connector no s'habilitarà.
Build Virtual Raster (Catalog)
-
Builds a VRT from a list of datasets
-
Merge
@@ -3330,7 +3305,7 @@ El connector no s'habilitarà.
Build a quick mosaic from a set of images
-
Information
@@ -3342,11 +3317,11 @@ El connector no s'habilitarà.
Build overviews (Pyramids)
-
Builds or rebuilds overview images
-
Tile index
@@ -3354,7 +3329,7 @@ El connector no s'habilitarà.
Build a shapefile as a raster tileindex
-
GdalTools settings
@@ -3387,14 +3362,14 @@ El connector no s'habilitarà.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
-
Web
-
GdalToolsBaseBatchWidget
Finished
- Finalitzat
+
Operation completed.
@@ -3418,12 +3393,12 @@ p, li { white-space: pre-wrap; }
No input files to process.
-
The following files were not created:
{0}
-
@@ -3435,7 +3410,7 @@ p, li { white-space: pre-wrap; }
The command is still running.
Do you want terminate it anyway?
-
@@ -3450,7 +3425,7 @@ Do you want terminate it anyway?
Finished
- Finalitzat
+
Processing completed.
@@ -3458,7 +3433,7 @@ Do you want terminate it anyway?
%s not created.
-
@@ -3493,7 +3468,7 @@ Do you want terminate it anyway?
Batch mode (for processing whole directory)
-
Recurse subdirectories
-
Create also prj file
-
Select the file for DEM
@@ -3532,11 +3507,11 @@ Do you want terminate it anyway?
Select the input file for Sieve
-
Select the input file for Warp
-
Select the mask file
@@ -3544,7 +3519,7 @@ Do you want terminate it anyway?
Select the input directory with files to Warp
-
Select the output directory to save the results to
@@ -3552,11 +3527,11 @@ Do you want terminate it anyway?
Output size or resolution required
-
The output file doesn't exist. You must set up the output size or resolution to create it.
-
Select the input file for Translate
@@ -3588,11 +3563,11 @@ Do you want terminate it anyway?
Select where to save the TileIndex output
-
Convert paletted image to RGB
-
Select the input file for convert
@@ -3624,23 +3599,23 @@ Do you want terminate it anyway?
Select the files for VRT
-
Select where to save the VRT
-
VRT (*.vrt)
-
Select the input directory with files for VRT
-
Select the input file for Near Black
-
Select the input file
@@ -3656,25 +3631,25 @@ Do you want terminate it anyway?
Error retrieving the extent
-
GDAL was unable to retrieve the extent from any file.
The "Use intersected extent" option will be unchecked.
-
Empty extent
-
The computed extent is empty.
Disable the "Use intersected extent" option to have a nonempty output.
-
Select where to save the Merge output
-
Select the input directory with files to Merge
@@ -3682,7 +3657,7 @@ Disable the "Use intersected extent" option to have a nonempty output.
{0} not created.
-
Select the files to analyse
@@ -3706,15 +3681,15 @@ Disable the "Use intersected extent" option to have a nonempty output.
Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
-
Finished
- Finalitzat
+
Processing completed.
- S'ha completat el processament.
+
Assign projection
@@ -3734,12 +3709,12 @@ Disable the "Use intersected extent" option to have a nonempty output.
Select the extent by drag on canvas
-
or change the extent coordinates
-
Re-Enable
-
@@ -3848,17 +3823,17 @@ and python executables.
MacOS users usually need to set it to something like
/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to python modules.
-
Useful to open local GDAL documentation instead of online help
when pressing on the tool dialog's Help button.
-
Select directory with GDAL executables
@@ -3878,7 +3853,7 @@ when pressing on the tool dialog's Help button.
Build Virtual Raster (Catalog)
-
Choose input directory instead of files
-
Recurse subdirectories
-
Highest
- La més alta
Average
- Mitjana
Lowest
- La més baixa
&Source No Data
-
Se¶te
-
Allow projection difference
- Permetre diferents projeccions
Clipper
-
&No data value
-
Clipping mode
-
Extent
- Extensió
Create an output alpha band
- Crear una banda alfa de sortida
&Attribute name
-
If not provided, no elevation attribute is attached.
-
ELEV
-
Convert RGB image to paletted
-
Batch mode (for processing whole directory)
-
Band to convert
- Banda a convertir
DEM (Terrain models)
- MDE (models de terreny)
+ MDE (models del terreny)
Compute &edges
-
Use Zevenbergen&&Thorne formula (instead of the Horn's one)
-
Hillshade
- Ombrejat
Slope
- Pendent
Color relief
-
TRI (Terrain Ruggedness Index)
-
TPI (Topographic Position Index)
-
Roughness
- Aspresa
Z factor (vertical exaggeration)
- Factor Z (exageració vertical)
Scale (ratio of vert. units to horiz.)
-
Azimuth of the light
- Azimut de la llum
Altitude of the light
- Altitud de la llum
Slope expressed as percent (instead of as degrees)
- Pendent expressada en percentatge (enlloc de graus)
Return trigonometric angle (instead of azimuth)
- Retorna angle trigonomètric (enlloc d'azimut)
Return 0 for flat (instead of -9999)
- Retorna 0 pel pla (en lloc de -9999)
Matching mode
- Mode de joc
Exact color (otherwise "0,0,0,0" RGBA)
- Color exacte (en cas contrari "0,0,0,0" RGBA)
Nearest color
- Color més proper
Fill Nodata
- Omplir sense dades
Smooth iterations
- Iteracions suaus
Band to operate on
- Banda per operar en
Validity mask
- Màscara de validesa
Do not use the default validity mask
-
&Z Field
-
Inverse distance to a power
-
Moving average
-
Nearest neighbor
-
Data metrics
-
Power
-
Smoothing
-
Max points
-
Min points
-
No data
-
Metrics
-
Range
-
Resize
-
Width
- Amplada
+
Height
- Alçada
+
Suppress GCP printing
-
Suppress metadata printing
-
Merge
- Combina
+
Layer stack
-
Use intersected extent
-
Grab pseudocolor table from the first image
-
Near Black
-
How &far from black (or white)
-
Search for nearly &white (255) pixels instead of black ones
-
Build overviews (Pyramids)
-
Remove all overviews.
-
Clean
-
Polygonize (Raster to vector)
- Poligonitza (ràster a vectorial)
+
&Output file for polygons (shapefile)
-
&Field name
- &Nom del camp
+ Nom del &camp
DN
-
Use mask
-
Assign projection
- Assigna la projecció
+
WARNING: current projection definition will be cleared
-
Desired SRS
-
Output will be:
- new GeoTiff if input file is not GeoTiff
- overwritten if input is GeoTiff
-
Select...
- Selecciona...
+
&Dist units
-
GEO
-
PIXEL
-
&Max dist
-
&No data
-
&Fixed buf val
-
&Attribute field
-
&Output file for rasterized vectors (raster)
-
Keep existing raster size and resolution
-
Raster size in pixels
-
Raster resolution in map units per pixel
-
Horizontal
-
Vertical
-
Sieve
-
&Pixel connections
-
Write absolute path
-
Skip files with different projection ref
-
&Target SRS
-
Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
-
Outsize
-
Assign a specified nodata value to output bands.
-
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
-
Expand
-
RGBA
-
Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
-
Srcwin
-
Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
-
Prjwin
-
Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
-
Sds
-
Warp (Reproject)
-
&Source SRS
-
&Resampling method
-
Near
-
Bilinear
-
Cubic
-
Cubic spline
-
Lanczos
-
No data values
-
&Memory used for caching
-
MB
-
Use m&ultithreaded warping implementation
-
&Output directory for contour lines (shapefile)
-
@@ -4825,111 +4800,111 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Please specify output shapefile
- Especifiqueu el Shapefile de sortida
+
Please specify valid tolerance value
-
Please specify valid UID field
-
Singleparts to multipart
-
Output shapefile
- Shapefile de sortida
+
Multipart to singleparts
-
Extract nodes
-
Polygons to lines
-
Input polygon vector layer
- Capa vectorial del polígon d'entrada
+
Export/Add geometry columns
-
Input vector layer
- Capa vectorial d'entrada
+
Layer CRS
-
Project CRS
- Projecte SRC
+
Ellipsoid
-
Polygon centroids
-
Output point shapefile
- Shapefile de punts de sortida
+
Delaunay triangulation
-
Input point vector layer
- Capa vectorial del punt d'entrada
+
Voronoi polygon
-
Buffer region
-
Lines to polygons
-
Input line vector layer
- Capa vectorial de línia de sortida
+
Polygon from layer extent
-
Input layer
-
Output polygon shapefile
-
Unable to delete existing shapefile.
-
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Cancel
@@ -4938,131 +4913,131 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Error processing specified tolerance!
Please choose larger tolerance...
-
Unable to delete incomplete shapefile.
-
At least two features must have same attribute value!
Please choose another field...
-
One or more features in the output layer may have invalid geometry, please check using the check validity tool
-
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Layer '{0}' updated
-
Error writing output shapefile.
-
GeoprocessingDialog
Dissolve all
-
Geoprocessing
- Geoprocessament
+
Please specify an input layer
-
Please specify a difference/intersect/union layer
-
Please specify valid buffer value
-
Please specify dissolve field
-
Please specify output shapefile
- Especifiqueu el Shapefile de sortida
+
No features selected, please uncheck 'Use selected' or make a selection
-
Buffer(s)
-
Create single minimum convex hull
-
Create convex hulls based on input field
-
Convex hull(s)
-
Dissolve
-
Difference layer
-
Difference
-
Intersect layer
- Interseca la capa
+
Intersect
-
Clip layer
-
Clip
-
Union layer
-
Union
-
Unable to delete existing shapefile.
-
Cancel
@@ -5075,18 +5050,18 @@ Please choose another field...
No output created. File creation error:
%s
-
Created output shapefile:
%s
%s%s
-
Error loading output shapefile:
%s
-
@@ -5096,34 +5071,34 @@ Avisos:
Symmetrical difference
-
Some output geometries may be missing or invalid.
Would you like to add the new layer anyway?
-
Input CRS error: Different input coordinate reference systems detected, results may not be as expected.
-
Input CRS error: One or more input layers missing coordinate reference information, results may not be as expected.
-
Feature geometry error: One or more output features ignored due to invalid geometry.
-
GEOS geoprocessing error: One or more input features have invalid geometry.
-
@@ -5131,32 +5106,32 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Launch Globe
-
Globe Settings
-
Unload Globe
-
Overlay data on a 3D globe
-
Settings for 3D globe
-
Unload globe
-
&Globe
-
@@ -5174,23 +5149,23 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Heatmap
-
Creates a heatmap raster for the input point vector.
-
&Heatmap
-
GDAL driver error
-
Raster update error
-
Could not open the created raster for updating. The heatmap was not generated.
-
Creating heatmap
-
Abort
-
Heatmap generation aborted
-
QGIS will now load the partially-computed raster.
-
@@ -5233,37 +5208,37 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Save Heatmap as:
-
No valid layers found!
-
Advanced options cannot be enabled.
-
Invalid output filename
-
Please enter a valid output file path and name.
-
Layer not found
-
Layer %1 not found.
-
@@ -5271,22 +5246,22 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Heatmap Plugin
-
...
-
Input point layer
- Capa d'entrada del punt
+
Output raster
-
Radius
-
10
- 10
+
meters
-
map units
-
Rows
- Files
+
Cell size X
-
Columns
- Columnes
+
Cell size Y
-
Use radius from field
-
Use weight from field
-
0.0
- 0.0
+
Decay ratio
-
Quartic (biweight)
-
Triangular
-
Uniform
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
Advanced
-
HelpEditionDialog
Outputs
-
HistoryDialog
Clear
-
Clear history and log
@@ -5415,15 +5390,15 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Confirmation
-
Are you sure you want to clear log?
-
Create test
-
@@ -5431,12 +5406,12 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Dialog
- Diàleg
+
Reload
-
DB Manager
-
@@ -5456,23 +5431,23 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Form
- Formulari
+
Symbol layer type
-
This layer doesn't have any editable properties
-
MainWindow
- &Edit
&Edita
@@ -5489,160 +5464,160 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Select
-
- Measure
-
- &Decorations
-
- &Layer
&Capa
- New
Nova
- &Plugins
&Connectors
- &Help
&Ajuda
- &Settings
Preferèncie&s
- &Raster
&Ràster
- Vect&or
Vect&orial
- &OpenStreetMap
&OpenStreetMap
- File
-
- Manage Layers
-
- Digitizing
-
- Advanced Digitizing
-
- Map Navigation
-
- Attributes
-
- Plugins
- Connectors
- Help
Ajuda
- Raster
- Ràster
+
- Label
-
- Vector
- Vector
+
- Database
-
- Web
-
- Ctrl+N
-
- Ctrl+O
-
- Ctrl+S
-
- Ctrl+Shift+S
-
- Save as Image...
Desa com a imatge...
- &New Print Composer
Composició d'impressió &nova
- Ctrl+P
-
- Composer Manager...
Gestor de composicions...
@@ -5662,1115 +5637,1115 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Nou des d'una plantilla
- Preview Mode
-
- Paste Features as
-
- &New
&Nou
- &Open...
&Obre...
- &Save
&Desa
- Save &As...
Desa &com a...
- Exit QGIS
Surt del QGIS
- Ctrl+Q
-
- &Undo
&Desfés
- Ctrl+Z
-
- &Redo
&Refés
- Ctrl+Shift+Z
-
- Cut Features
Retalla els objectes
- Ctrl+X
-
- Copy Features
Copia els objectes
- Ctrl+C
-
- Paste Features
Enganxa els objectes
- Ctrl+V
-
- Add Feature
Afegeix un objecte
- Ctrl+.
-
- Move Feature(s)
Mou objecte/s
- Reshape Features
Canvia la forma dels objectes
- Split Features
Divideix els objectes
- Split Parts
-
- Delete Selected
Suprimeix la selecció
- Add Ring
-
- Add Part
-
- Simplify Feature
Simplifica l'objecte
- Delete Ring
-
- Delete Part
-
- Merge Selected Features
Combina els objectes seleccionats
- Merge Attributes of Selected Features
Combina els atributs dels objectes seleccionats
- Node Tool
-
- Rotate Point Symbols
-
- Snapping Options...
-
- Pan Map
-
- Zoom In
-
- Ctrl++
-
- Zoom Out
-
- Ctrl+-
-
- Select Single Feature
+
+
+ Select Features by Rectangle
+
+
+ Select Features by Polygon
-
- Select Features by Freehand
-
- Select Features by Radius
-
- Deselect Features from All Layers
-
- Identify Features
-
- Ctrl+Shift+I
-
- Measure Line
-
- Ctrl+Shift+M
-
- Measure Area
-
- Ctrl+Shift+J
-
- Measure Angle
-
- Zoom Full
-
- Ctrl+Shift+F
-
- Zoom to Layer
-
- Zoom to Selection
-
- Ctrl+J
-
- Zoom Last
-
- Zoom Next
-
- Zoom Actual Size
-
- Zoom to Native Pixel Resolution
-
- Map Tips
-
- Show information about a feature when the mouse is hovered over it
-
- New Bookmark...
-
- Ctrl+B
-
- Show Bookmarks
-
- Ctrl+Shift+B
-
- Refresh
-
- Text Annotation
-
- Form Annotation
-
- Move Annotation
-
- Labeling
-
- Layer Labeling Options
-
- New Shapefile Layer...
Capa Shapefile nova...
- Ctrl+Shift+N
-
- New SpatiaLite Layer ...
Capa SpatiaLite nova...
- Ctrl+Shift+A
-
- Raster calculator ...
Calculadora ràster...
- Add Vector Layer...
Afegeix una capa vectorial...
- Ctrl+Shift+V
-
- Add Raster Layer...
Afegeix una capa ràster...
- Ctrl+Shift+R
-
- Add PostGIS Layers...
Afegeix capes PostGIS...
- Ctrl+Shift+D
-
- Add SpatiaLite Layer...
Afegeix una capa SpatiaLite...
- Ctrl+Shift+L
-
- Add MSSQL Spatial Layer...
Afegeix una capa espacial MSSQL...
- Add Oracle Spatial Layer...
-
- Ctrl+Shift+O
-
- Add WMS/WMTS Layer...
Afegeix una capa WMS/WMTS...
- Ctrl+Shift+W
-
- Open Attribute Table
Obre una taula d'atributs
- Toggle Editing
-
- Toggles the editing state of the current layer
-
- Save for Selected Layer(s)
-
- Save edits to current layer, but continue editing
-
- Save As...
Desa com a...
- Add from Layer Definition File...
-
- Save As Layer Definition File...
-
- Normal
-
- Normal preview mode
-
- Simulate Photocopy (Grayscale)
-
- Simulate photocopy (grayscale)
-
- Simulate Fax (Mono)
-
- Simulate fax (mono)
-
- Simulate Color Blindness (Protanope)
-
- Simulate color blindness (protanope)
-
- Simulate Color Blindness (Deuteranope)
-
- Simulate color blindness (deuteranope)
-
- Set Scale Visibility of Layer(s)
-
- Remove Layer(s)
Suprimeix una o més capes
- Ctrl+D
-
- Set CRS of Layer(s)
-
-
- Ctrl+Shift+C
-
-
- Set Project CRS from Layer
-
Properties...
- Ctrl+Shift+C
+
Set Project CRS from Layer
+
+
+ Properties...
+
+
+ Query...
-
- Add to Overview
-
- Add All to Overview
-
- Remove All from Overview
-
- Show All Layers
-
- Ctrl+Shift+U
-
- Hide All Layers
-
- Ctrl+Shift+H
-
- Manage and Install Plugins...
-
- Open Field Calculator
-
- Add Delimited Text Layer...
Afegeix una capa de text delimitada...
- Add Delimited Text Layer
Afegeix una capa de text delimitada...
- New Vector Layer
Capa vectorial nova
- Paste features in clipboard into a new OGR vector layer.
-
- New Memory Vector Layer
-
- Paste features in clipboard into a new memory vector layer.
-
- Toggle Full Screen Mode
-
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
- F5
+
- Ctrl+F
-
- F11
- F11
+
- Project Properties...
Propietats del projecte...
- Ctrl+Shift+P
-
- Options...
-
- Custom CRS...
-
- Configure shortcuts...
-
- Local Histogram Stretch
-
- Stretch histogram of active raster to view extents
-
- Help Contents
Continguts de l'ajuda
- F1
- F1
+
- API documentation
Documentació de l'API
- QGIS Home Page
Pàgina d'inici del QGIS
- Ctrl+H
-
- Check QGIS Version
Comprova la versió del QGIS
- Check if your QGIS version is up to date (requires internet access)
Comprova si la teva versió del QGIS està actualitzada (requereix accés a Internet)
- About
Quant a
- QGIS Sponsors
Patrocinadors del QGIS
- Move Label
-
- Rotate Label
-
- Rotate Label
Ctl (Cmd) increments by 15 deg.
-
- Change Label
-
- Style Manager...
-
- Python Console
-
- Full histogram stretch
-
- Stretch Histogram to Full Dataset
-
- Customization...
-
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
-
- Ctrl+M
-
- Embed Layers and Groups...
-
- Embed layers and groups from other project files
-
- &Copyright Label
-
- Creates a copyright label that is displayed on the map canvas.
-
- &North Arrow
-
- "Creates a north arrow that is displayed on the map canvas"
-
- &Scale Bar
Barra d'e&scala
- Creates a scale bar that is displayed on the map canvas
Crea una barra d'escala que es mostra al llenç del mapa
- Add WFS Layer...
Afegeix una capa WFS...
- Add WFS Layer
Afegeix una capa WFS
- Feature Action
-
- Run Feature Action
-
- Pan Map to Selection
-
- Touch zoom and pan
-
- Offset Curve
-
- Copy style
-
- Paste style
-
- Add WCS Layer...
Afegeix una capa WCS...
- &Grid
-
- Grid
-
- Pin/Unpin Labels
-
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
Acts on all editable layers
-
- Highlight Pinned Labels
-
- New Blank Project
Projecte en blanc nou
- Local Cumulative Cut Stretch
-
- Local cumulative cut stretch using current extent, default limits and estimated values.
-
- Full Dataset Cumulative Cut Stretch
-
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
-
- Show/Hide Labels
-
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
Acts on currently active editable layer
-
- Html Annotation
-
- Duplicate Layer(s)
-
- SVG annotation
-
- Save for All Layers
-
- Rollback for All Layers
-
- Cancel for All Layers
-
- Rollback for Selected Layer(s)
-
- Current Edits
-
- Cancel for Selected Layer(s)
-
- Save Layer Edits
-
- Rotate Feature(s)
Gira l'objecte
-
- &Download data
-
-
- &Import topology from XML
-
&Download data
+
+
+ &Import topology from XML
+
+
+ &Export topology to SpatiaLite
-
- Increase brightness
-
- Decrease brightness
-
- Increase contrast
-
- Decrease contrast
-
- Select By Expression
-
- Select features using an expression
-
- Need commercial support?
Necessiteu suport comercial?
- DXF Export...
-
- Fill Ring
-
@@ -6778,76 +6753,76 @@ Acts on currently active editable layer
Manage connections
-
Save to file
- Desa en un fitxer
+
Browse
- Navega
+
Load from file
-
Load
-
Save
- Desa
+
eXtensible Markup Language (*.xml *.XML)
-
Save connections
- Desa les connexions
+
Load connections
-
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
- S'estan carregant les connexions
+
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -6855,78 +6830,78 @@ Acts on currently active editable layer
MetaSearch
-
Search
-
Find
-
Set global
-
Map extent
-
-180
-
90
- 90
+
Records
-
-90
-
180
- 180
+
From
-
Keywords
-
Results
- Resultats
+
>
-
<<
-
Add WMS/WMTS
-
<
-
Abstract
-
Double click to see full record information
-
Type
- Tipus
+
Title
-
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
-
Edit
- Edita
+
Delete
-
Save
- Desa
+
Add default services
-
Load
-
Settings
-
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
-
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
ModelerDialog
Search...
- Cerca
+ Cerca...
Message
-
There are unsaved changes in model. Close modeler without saving?
-
Empty model
@@ -7182,27 +7157,27 @@ Acts on currently active editable layer
PNG files (*.png *.PNG)
-
Warning
- Avís
+
Please enter group and model names before saving
-
Save Model
-
Processing models (*.model)
-
I/O error
-
Unable to save edits. Reason:
@@ -7214,26 +7189,21 @@ Acts on currently active editable layer
Can't save model
No es pot desar el model
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
-
Model was correctly saved.
-
Open Model
@@ -7243,24 +7213,29 @@ See the log for more information.
Could not open model
No s'ha pogut obrir el model
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
- Paràmetres
+
MultipleInputDialog
Select all
- Selecciona-ho tot
+
Clear selection
-
Toggle selection
-
@@ -7268,107 +7243,107 @@ See the log for more information.
Create a new Catalogue connection
-
Name
- Nom
+
URL
-
Save connection
- Desa la connexió
+
Both Name and URL must be provided
-
Overwrite %s?
-
NotSupportedDbType
%s is not supported yet
-
NumberInputDialog
[Enter your formula here]
-
Values from data layers extents
-
Min X
-
Max X
-
Min Y
-
Max Y
-
Cellsize
-
Values from raster layers statistics
-
Mean
- Mitjana
+
Std. deviation
-
Max value
-
Min value
-
Values from QGIS map canvas
-
Current extent
-
Full extent of all layers in map canvas
-
Wrong expression
-
The expression entered is not correct
-
@@ -7376,12 +7351,12 @@ See the log for more information.
Create Oracle Connection
-
Name
- Nom
+
Database instance
-
Password
-
OutputSelectionPanel
[Save to temporary file]
-
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
- Desa el fitxer
+
Select directory
-
PGDatabase
&Table
-
Run &Vacuum Analyze
-
Sorry
- Ho sento
+
Select a TABLE for vacuum analyze.
-
PGTable
Table rule
-
PointsInPolygonThread
point count field
-
PostGisDBPlugin
There is no defined database connection "%s".
-
PrepareAPIDialog
Error
- Error
+
Done
-
@@ -7515,7 +7490,7 @@ See the log for more information.
&Commander
-
@@ -7528,93 +7503,93 @@ See the log for more information.
Enter algorithm name to filter list
- Introduïu el nom de l'algoritme per filtrar la llista
+
Search...
- Cerca
+ Cerca...
Execute
-
Execute as batch process
-
Edit rendering styles for outputs
-
Recently used algorithms
- Algoritmes utilitzats recentment
Python
Python warning
-
An error has occured while executing Python code:
-
Python version:
-
QGIS version:
- Versió del QGIS:
Python path:
-
Python error
-
Couldn't load plugin '%s' from ['%s']
-
Couldn't load plugin %s
-
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
-
Error while unloading plugin %s
-
PythonConsole
Python Console
-
Clear console
-
Compile APIs
-
Saving prepared file...
-
Saved
@@ -7622,27 +7597,27 @@ See the log for more information.
Done
-
Error preparing file...
-
Hide Editor
-
Check Syntax
-
Run selected
-
Run Script
-
Undo
@@ -7654,55 +7629,55 @@ See the log for more information.
Find Text
-
Cut
-
Copy
- Copia
+
Paste
-
Comment
-
Uncomment
-
Share on codepad
-
Hide/Show Object Inspector
-
Select All
-
Settings
-
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
-
Connection error:
-
[Temporary file saved in {0}]
@@ -7710,20 +7685,20 @@ See the log for more information.
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
-
You have to save the file before running it.
@@ -7751,7 +7726,7 @@ See the log for more information.
List all tabs
-
New Editor
@@ -7767,7 +7742,7 @@ See the log for more information.
Close Others
-
Save As
@@ -7776,11 +7751,11 @@ See the log for more information.
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
@@ -7802,23 +7777,23 @@ See the log for more information.
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
-
Show Editor
-
Enter Selected
-
Object Inspector
-
Open file
@@ -7834,43 +7809,43 @@ See the log for more information.
Run script
-
Show editor
-
Import Class
-
Import Processing class
-
Enter text to find...
-
Find Next
-
Find Previous
-
Case Sensitive
-
Whole Word
-
Wrap Around
-
Open File
@@ -7878,7 +7853,7 @@ See the log for more information.
Save Error
-
The file <b>{0}</b> could not be saved. Error: {1}
@@ -7890,15 +7865,15 @@ See the log for more information.
History saved successfully.
-
Session and file history cleared successfully.
-
History cleared successfully.
-
Command History
@@ -7906,15 +7881,15 @@ See the log for more information.
Show
-
Clear File
-
Clear Session
-
Python Console - Command History
@@ -7922,39 +7897,39 @@ See the log for more information.
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
-
Import PyQt.QtGui class
-
Run command
-
Help
@@ -7966,12 +7941,12 @@ See the log for more information.
meters
-
feet
-
degrees
-
<unknown>
-
nautical miles
-
@@ -7998,27 +7973,27 @@ See the log for more information.
Unable to initialize
QOCISpatialDriver
-
Unable to logon
-
Unable to begin transaction
-
Unable to commit transaction
-
Unable to rollback transaction
-
@@ -8028,42 +8003,42 @@ See the log for more information.
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to goto next
-
Unable to alloc statement
-
Unable to prepare statement
-
Unable to get statement type
-
Unable to bind value
-
Unable to execute statement
-
@@ -8071,88 +8046,88 @@ See the log for more information.
Interpolating...
-
Abort
-
Building triangulation...
-
Estimating normal derivatives...
-
- minidump written to %1
-
- writing of minidump to %1 failed (%2)
-
- creation of minidump to %1 failed (%2)
-
- Crash dumped
-
QGIS starting in non-interactive mode not supported.
You are seeing this message most likely because you have no DISPLAY environment variable set.
-
Deleted vertices
-
Moved vertices
-
No active vector layer
-
To select features, choose a vector layer in the legend
-
CRS Exception
-
Selection extends beyond layer's coordinate system.
-
Python is not enabled in QGIS.
-
Plugins
- Connectors
Plugin "%1" is not compatible with this version of QGIS.
It will be disabled.
-
Loaded %1 (package: %2)
-
Library name is %1
-
Failed to load %1 (Reason: %2)
-
Attempting to resolve the classFactory function
-
Loaded %1 (Path: %2)
-
Error Loading Plugin
-
There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
%1.
-
Unable to find the class factory for %1.
-
Plugin %1 did not return a valid type and cannot be loaded
-
Error when reading metadata of plugin %1
-
CRS
-
Generated CRS
A CRS automatically generated from layer info get this prefix for description
-
Saved user CRS [%1]
-
Imported from GDAL
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate line length.
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
-
m²
-
km²
-
ha
-
m
-
km
-
mm
-
cm
-
sq ft
-
acres
-
sq mile
-
foot
-
feet
-
mile
-
sq. NM
-
NM
-
sq.deg.
-
degree
-
degrees
-
unknown
-
Cannot convert '%1' to double
-
Cannot convert '%1' to int
-
Cannot convert '%1' to DateTime
-
Cannot convert '%1' to Date
-
Cannot convert '%1' to Time
-
Cannot convert '%1' to Interval
-
- Cannot convert '%1' to boolean
-
- Domain max must be greater than domain min
-
- Exponent must be greater than 0
-
- Invalid regular expression '%1': %2
-
- Index is out of range
-
- Cannot convert '%1:%2:%3' to color
-
- Cannot convert '%1:%2:%3:%4' to color
-
- "%1" is not a valid color ramp
-
- Cannot convert '%1:%2:%3:%4:%5' to color
-
- function help for %1 missing
-
- Operators
Operadors
- Fields and Values
-
- Math
-
- Conversions
-
- Conditionals
-
second|seconds
list of words separated by | which reference years
-
minute|minutes
list of words separated by | which reference minutes
-
hour|hours
list of words separated by | which reference minutes hours
-
day|days
list of words separated by | which reference days
-
week|weeks
wordlist separated by | which reference weeks
-
month|months
list of words separated by | which reference months
-
year|years
list of words separated by | which reference years
-
- Date and Time
-
- String
-
- Color
-
- Geometry
- Geometria
+
- Record
-
- No root node! Parsing failed?
-
- (no root)
-
- Unary minus only for numeric values.
-
- Can't preform /, *, or % on DateTime and Interval
-
- [unsupported type;%1; value:%2]
-
- Column '%1' not found
-
Exception: %1
-
GEOS
-
GEOS prior to 3.2 doesn't support GEOSInterpolate
-
segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
-
ring %1 with less than four points
-
line %1 with less than two points
-
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
-
+
segments %1 and %2 of line %3 intersect at %4
-
ring %1 of polygon %2 not in exterior ring
-
GEOS error:could not produce geometry for GEOS (check log window)
-
GEOS error:%1
-
polygon %1 has no rings
-
polygon %1 inside polygon %2
-
Unknown geometry type
-
Unknown geometry type %1
-
Geometry validation was aborted.
-
Geometry has %1 errors.
-
Geometry is valid.
-
invalid line
-
Label
-
Console
-
infinite
-
W
-
E
-
S
-
N
-
No QGIS data provider plugins found in:
%1
-
No vector layers can be loaded. Check your QGIS installation
-
No Data Providers
-
No data provider plugins are available. No vector layers can be loaded
-
Unable to instantiate the data provider plugin %1
-
Failed to load %1: %2
-
OGR driver for '%1' not found (OGR error: %2)
-
trimming attribute name '%1' to ten significant characters produces duplicate column name.
-
creation of data source failed (OGR error:%1)
-
creation of layer failed (OGR error:%1)
-
unsupported type for field %1
-
creation of field %1 failed (OGR error: %2)
-
created field %1 not found (OGR error: %2)
-
Invalid variant type for field %1[%2]: received %3 with type %4
-
OGR
-
no available replacement for internal fieldname ogc_fid found
-
Reserved attribute name ogc_fid replaced with %1
-
By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
Feature geometry not imported (OGR error: %1)
-
Feature creation error (OGR error: %1)
-
Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
-
Feature write errors:
-
Stopping after %1 errors
-
Only %1 of %2 features written.
-
Arc/Info ASCII Coverage
-
Atlas BNA
-
Comma Separated Value
-
ESRI Shapefile
-
DBF file
-
FMEObjects Gateway
-
New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
Limit the number of coordinate pairs per line in multiline format.
-
Set the number of decimal for coordinates. Default value is 10.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
Set to YES to resize fields to their optimal size.
-
DBF File
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
GeoJSON
-
whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
GeoRSS
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
If not specified, GML2 will be used.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
Geography Markup Language [GML]
-
Generic Mapping Tools [GMT]
-
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
GPS eXchange Format [GPX]
-
INTERLIS 1
-
INTERLIS 2
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Keyhole Markup Language [KML]
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Mapinfo TAB
-
Mapinfo MIF
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Microstation DGN
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
S-57 Base file
-
Spatial Data Transfer Standard [SDTS]
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
SQLite
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
SpatiaLite
-
AutoCAD DXF
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
Geoconcept
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
ESRI FileGDB
-
Cannot overwrite a OGR layer in place
-
Failed to transform, writing stopped. (Exception: %1)
-
Unable to load %1 provider
-
Provider %1 has no %2 method
-
Loaded from Provider
-
Loading of layer failed
-
Creation error for features from #%1 to #%2. Provider errors was:
%3
-
Import was canceled at %1 of %2
-
Vector import
-
Only %1 of %2 features written.
-
Reading raster part %1 of %2
-
Building Pyramids...
-
Building pyramids failed - write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Multiband color
-
Paletted
-
Singleband gray
-
Singleband pseudocolor
-
Singleband color data
-
All Ramps
-
Single Symbol
-
Categorized
-
Graduated
-
Rule-based
-
Point displacement
-
Inverted polygons
-
Simple line
-
Marker line
-
Simple marker
-
SVG marker
-
Font marker
-
Ellipse marker
-
Vector Field marker
-
Simple fill
-
Gradient fill
-
Shapeburst fill
-
SVG fill
-
Centroid fill
-
Line pattern fill
-
Point pattern fill
-
Where is '%1' (original location: %2)?
-
QGIS rocks!
-
<html>QGIS rocks!</html>
-
Raster Histogram
-
Pixel Value
-
Frequency
-
Internal Compass
-
Shows a QtSensors compass reading
-
Version 0.9
-
Coordinate Capture
- Captura de coordenades
+
Capture mouse coordinates in different CRS
-
Vector
- Vector
+
Version 0.1
-
Version 0.2
-
Layers
-
Dxf2Shp Converter
-
Converts from dxf to shp file format
-
eVis
-
An event visualization tool - view images associated with vector features
-
Database
-
Version 1.1.0
-
Warning
- Avís
+
This tool only supports vector data
-
No active layers found
-
Georeferencer GDAL
-
Georeferencing rasters using GDAL
-
Raster
- Ràster
+
Could not reproject view extent: %1
-
Could not reproject layer extent: %1
-
Version 3.1.9
-
Fit to a linear transform requires at least 2 points.
-
Fit to a Helmert transform requires at least 2 points.
-
Fit to an affine transform requires at least 4 points.
-
Fitting a projective transform requires at least 4 corresponding points.
-
Globe
-
Overlay data on a 3D globe
-
GPS Tools
-
Tools for loading and importing GPS data
-
Location: %1
-
Location: %1<br>Mapset: %2
-
<b>Raster</b>
-
N-S resolution
-
E-W resolution
-
North
-
South
-
East
-
West
-
Format
-
Minimum value
-
Maximum value
-
Data source
-
Data description
-
Comments
-
Categories
-
<b>Vector</b>
-
Points
-
Lines
-
Boundaries
-
Centroids
-
Faces
-
Kernels
-
Areas
-
Islands
-
Top
-
Bottom
-
yes
-
no
-
History<br>
-
<b>Layer</b>
-
Features
-
Driver
-
Table
- Taula
+
Key column
-
<b>Region</b>
-
XY
-
UTM
-
SP
-
LL
-
Other
-
Projection Type
-
Zone
-
3D Cols
-
3D Rows
-
Depths
-
E-W 3D resolution
-
N-S 3D resolution
-
GRASS
-
GRASS layer
-
Heatmap
-
Creates a Heatmap raster for the input point vector
-
Interpolation plugin
-
A plugin for interpolation based on vertices of a vector layer
-
Version 0.001
-
OfflineEditing
-
Allow offline editing and synchronizing with database
-
Oracle Spatial GeoRaster
-
Access Oracle Spatial GeoRaster
-
Raster Terrain Analysis plugin
-
A plugin for raster based terrain analysis
-
Road graph plugin
-
It solves the shortest path problem.
-
Processing 1/2 - %p%
-
Processing 2/2 - %p%
-
Intersects
-
Is disjoint
-
Touches
-
Crosses
-
Within
-
Contains
-
Equals
-
Overlaps
-
Spatial Query Plugin
-
A plugin that makes spatial queries on vector layers
-
SPIT
-
Shapefile to PostgreSQL/PostGIS Import Tool
-
+
+ SQL Anywhere plugin
+
+
+ Store vector layers within a SQL Anywhere database
+
Zonal statistics plugin
-
A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
-
Cannot open GDAL MEM dataset %1: %2
-
Cannot GDALCreateGenImgProjTransformer:
-
Cannot inittialize GDALWarpOperation :
-
Cannot ChunkAndWarpImage: %1
-
GDAL/OGR VSIFileHandler
-
This raster file has no bands and is invalid as a raster layer.
-
Cannot get GDAL raster band: %1
-
Nearest Neighbour
-
Average
-
Gauss
-
Cubic
-
Mode
-
None
-
Parse error at line %1 : %2
-
GPS eXchange format provider
-
GRASS plugin
-
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
-
Choose GRASS installation path (GISBASE)
-
GRASS data won't be available if GISBASE is not specified.
-
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
GISBASE is not set.
-
%1 is not a GRASS mapset.
-
Cannot start %1/etc/lock
-
Mapset is already in use.
-
Temporary directory %1 exists but is not writable
-
Cannot create temporary directory %1
-
Cannot create %1
-
Cannot remove mapset lock: %1
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
Cannot read raster map region
-
Cannot read vector map region
-
Cannot read region
-
Cannot start module
-
command: %1 %2
-
Cannot run module
-
command: %1 %2<br>%3<br>%4
-
Cannot get projection
-
Cannot get raster extent
-
Cannot get map info
-
Cannot get colors
-
Cannot query raster
-
Cannot draw raster
-
Loading of the MSSQL provider failed
-
Unsupported type for field %1
-
Creation of fields failed
-
OGR[%1] error %2: %3
-
Unable to create the datasource. %1 exists and overwrite flag is false.
-
Unable to get driver %1
-
Arc/Info Binary Coverage
-
DODS
-
OpenFileGDB
-
ESRI Personal GeoDatabase
-
ESRI ArcSDE
-
ESRI Shapefiles
-
GeoPackage
-
Grass Vector
-
Informix DataBlade
-
Ingres
-
Mapinfo File
-
MySQL
-
MSSQL
-
Oracle Spatial
-
ODBC
-
OGDI Vectors
-
PostgreSQL
-
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
UK. NTF2
-
U.S. Census TIGER/Line
-
VRT - Virtual Datasource
-
X-Plane/Flightgear
-
All files
-
Duplicate field (10 significant characters): %1
-
Creating the data source %1 failed: %2
-
Unknown vector type of %1
-
Creation of OGR data source %1 failed: %2
-
field %1 with unsupported type %2 skipped
-
creation of field %1 failed
-
Couldn't create file %1.qpj
-
-
- Fetching features failed.
-SQL:%1
-Error: %2
-
Fetching features failed.
+SQL:%1
+Error: %2
+
+
+ Oracle
-
Connection to database failed
-
No owner name found
-
Creation of data source %1 failed:
%2
-
Loading of the layer %1 failed
-
Field name clash found (%1 not remappable)
-
%1 not owner of the table %2.
-
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Unable to delete layer %1.%2:
%3
-
Unable to clean metadata %1.%2:
%3
-
no result buffer
-
Fetching from cursor %1 failed
Database error: %2
-
PostGIS
-
Infinite filter rectangle specified
-
Unable to delete layer %1:
%2
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
SQLite error: %2
SQL: %1
-
SQLite error getting feature: %1
-
creation of data source %1 failed. %2
-
loading of the layer %1 failed
-
creation of fields failed
-
Unable to initialize SpatialMetadata:
-
Unable to activate FOREIGN_KEY constraints [%1]
-
Unable to delete table %1
-
Unable to delete table %1:
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
The extra plugin path '%1' does not exist !
-
Couldn't load SIP module.
-
Python support will be disabled.
-
Couldn't set SIP API versions.
-
Couldn't load PyQt4.
-
Couldn't load PyQGIS.
-
Couldn't load QGIS utils.
-
An error occured during execution of following code:
-
Python version:
-
QGIS version:
- Versió del QGIS:
Python path:
-
Python error
-
Undefined
-
Hidden
-
Title
-
Group
-
Subgroup
-
Symbol
-
Symbol label
-
Topology Checker
-
A Plugin for finding topological errors in vector layers
-
Using fix %1.
-
Topology plugin
-
intersecting geometries
-
features too close
-
point not covered by segment
-
segment too short
-
invalid geometry
-
dangling end
-
duplicate geometry
-
pseudo node
-
overlaps
-
gaps
-
point not covered
-
line ends not covered by point
-
point not in polygon
-
polygon does not contain point
-
multipart feature
-
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Save style to DB (%1)
-
Could not save symbology because:
%1
-
Attribute index %1 out of bounds [0;%2]
-
Error
- Error
+
Layer
- Capa
+
Feature ID
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
-
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
-
QSpatiaLiteDriver
- Error opening database
S'ha produït un error en obrir la base de dades
- Error closing database
-
- Unable to begin transaction
-
- Unable to commit transaction
-
- Unable to rollback transaction
-
@@ -11464,37 +11453,37 @@ Response was:
Unable to fetch row
-
No query
-
- Unable to execute statement
-
- Unable to execute multiple statements at a time
-
- Unable to reset statement
-
- Unable to bind parameters
-
- Parameter count mismatch
-
@@ -11502,82 +11491,82 @@ Response was:
No Error has occurred
-
Invalid file descriptor (port was not opened correctly)
-
Unable to allocate memory tables (POSIX)
-
Caught a non-blocked signal (POSIX)
-
Operation timed out (POSIX)
-
The file opened by the port is not a valid device
-
The port detected a break condition
-
The port detected a framing error (usually caused by incorrect baud rate settings)
-
There was an I/O error while communicating with the port
-
Character buffer overrun
-
Receive buffer overflow
-
The port detected a parity error in the received data
-
Transmit buffer overflow
-
General read operation failure
-
General write operation failure
-
Unknown error: %1
-
@@ -11590,7 +11579,7 @@ Response was:
Multiple Instances of QgisApp
-
Reading settings
-
Browser
-
Browser (2)
-
GPS Information
-
Log Messages
-
QGIS starting...
-
Starting Python
- S'està iniciant Python
Restoring loaded plugins
- S'estan restaurant els connectors carregats
Initializing file filters
-
Restoring window state
-
El QGIS està preparat.
- Minimize
-
- Ctrl+M
Minimize Window
-
- Minimizes the active window to the dock
-
- Zoom
-
- Toggles between a predefined size and the window size set by the user
-
- Bring All to Front
-
- Bring forward all open windows
-
- Current Edits
-
- Error
- Error
+
- Failed to open Python console:
-
QGIS
-
Multiple instances of QGIS application object detected.
Please contact the developers.
-
QGIS - %1 ('%2')
-
- Panels
-
- Toolbars
-
- Window
-
- &Database
Base de &dades
- &Web
-
- Progress bar that displays the status of rendering layers and other time-intensive operations
-
- Toggle extents and mouse position display
-
- Coordinate:
-
- Current map coordinate
-
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
-
- Current map coordinate (lat,lon or east,north)
-
- Scale
-
- Current map scale
-
- Displays the current map scale
-
- Current map scale (formatted as x:y)
-
- Render
-
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
-
- Toggle map rendering
-
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
-
- CRS status - Click to open coordinate reference system dialog
-
- Ready
-
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
-
- Overview
-
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
-
- Layers
-
- Map layer list that displays all layers in drawing order.
-
- Layer order
-
Private qgis.db
-
- < Blank >
-
-
- QGIS version
-
-
- QGIS code revision
-
-
- Compiled against Qt
-
Running against Qt
- QGIS version
+ Versió del QGIS
- Compiled against GDAL/OGR
- QGIS code revision
+
Compiled against Qt
+
+
+ Running against Qt
+
+
+ Compiled against GDAL/OGR
+
+
+ Running against GDAL/OGR
-
- PostgreSQL Client Version
-
- No support.
-
-
- SpatiaLite Version
-
SpatiaLite Version
+
+
+ QWT Version
-
- PROJ.4 Version
-
- QScintilla2 Version
-
- This copy of QGIS writes debugging output.
-
- %1 doesn't have any layers
-
-
- Invalid Data Source
-
Invalid Data Source
+
+
+ %1 is not a valid or recognized data source
-
- Vector
- Vector
+
- PostgreSQL
-
- Cannot get PostgreSQL select dialog from provider.
-
- %1 is an invalid layer - not loaded
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
- QGIS files
-
- No legend entries selected
-
- Select the layers and groups you want to remove in the legend.
-
- Remove layers and groups
Suprimeix les capes i els grups
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
- Do you want to save the current project? %1
Voleu desar el projecte actual? %1
- Invalid Layer
-
- SpatiaLite
-
- Cannot get SpatiaLite select dialog from provider.
-
- Delimited Text
-
- Cannot get Delimited Text select dialog from provider.
-
- MSSQL
-
- Cannot get MSSQL select dialog from provider.
-
- Oracle
-
- Cannot get Oracle select dialog from provider.
-
- WMS
-
- Cannot get WMS select dialog from provider.
-
- WCS
-
- Cannot get WCS select dialog from provider.
-
- WFS
-
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
-
- Auto-open Project
-
- Failed to open: %1
-
- Not valid project file: %1
-
- Project failed to open: %1
-
- Default template has been reopened: %1
-
- File not found: %1
-
- Calculating...
-
- Abort...
-
- Choose a QGIS project file to open
-
- Loading project: %1
-
- Unable to open project
-
- Security warning
-
- project macros have been disabled.
-
- Enable macros
-
- Project loaded
-
- Choose a QGIS project file
-
- Saved project to: %1
Projecte desat a: %1
- Unable to save project %1
No s'ha pogut desar el projecte %1
- Choose a file name to save the QGIS project file as
-
- Unable to load %1
-
- Choose a file name to save the map image as
-
- Saved map image to %1
-
- Default system font substituted.
-
- Labeling
-
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
-
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
-
Range
-
Unique Values
-
File Name
-
Value Map
-
Enumeration
-
Hidden
-
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
-
Web View
-
Color
-
Relation Reference
-
Date/Time
-
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
-
- The project file is not writable.
No es pot escriure al fitxer del projecte.
- DXF export completed
-
- DXF export failed
-
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
-
- Show more
-
- Labeling Options
-
- Please select a vector layer first
-
- Layer labeling settings
-
- Reading raster
-
- Cannot write raster error code: %1
-
- Saving done
-
-
- Export to vector file has been completed
-
Save error
- Export to vector file has been completed
+
- Save error
+
+
+ Export to vector file failed.
Error: %1
-
- No Layer Selected
-
- To delete features, you must select a vector layer in the legend
-
- No Vector Layer Selected
-
- Deleting features only works on vector layers
-
- Provider does not support deletion
-
- Data provider does not support deleting features
-
- Layer not editable
-
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
-
-
- No Features Selected
-
-
- The current layer has not selected features
-
No Features Selected
+
+
+ The current layer has not selected features
+
+
+ Delete features
-
- Delete %n feature(s)?
number of features to delete
-
-
+
- Features deleted
-
- Problem deleting features
-
- A problem occured during deletion of features
-
- %n feature(s) deleted.
number of features deleted
-
-
+
- Merging features...
-
- Abort
-
- Create unique print composer title
Crea un títol de composició d'impressió únic
- (title generated if left empty)
(es genera un títol si es deixa buit)
- Composer title
Títol de la composició
- Title can not be empty!
El títol no pot ser buit.
- Title already exists!
-
- Composer %1
Composició %1
- copy
-
- No active layer
-
- No active layer found. Please select a layer in the layer list
-
-
- Active layer is not vector
-
-
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
-
Active layer is not vector
+
+
+ The merge features tool only works on vector layers. Please select a vector layer from the layer list
+
+
+ Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
-
- Not enough features selected
-
- The merge tool requires at least two selected features
-
- Merged feature attributes
-
- Merge failed
-
- An error occured during the merge operation
-
- Union operation canceled
-
-
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
-
+ The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
+
+
+ Merged features
-
- No active vector layer
-
- To select features, choose a vector layer in the legend
-
- Features cut
-
- Features pasted
-
- Paste features
-
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
-
- New memory layer name
-
- Layer name
-
- No features in clipboard.
-
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
No s'ha pogut crear la capa nova
- Cannot create field %1 (%2,%3)
-
- Cannot copy style: %1
-
- Cannot parse style: %1:%2:%3
-
- Cannot read style: %1
-
- Start editing failed
-
- Provider cannot be opened for editing
-
- Stop editing
-
- Do you want to save the changes to layer %1?
- Voleu desar els canvis a la capa %1?
+
- Problems during roll back
-
- Could not %1 changes to layer %2
Errors: %3
-
- rollback
-
- cancel
-
- Save
Desa
- all
-
- Rollback
-
- Cancel
Cancel·la
- Current edits
-
- %1 current changes for %2 layer(s)?
-
- copy
-
- Plugin layer
-
- Memory layer
-
- Duplicate layer:
-
- %1 (duplication resulted in invalid layer)
-
- Set scale visibility for selected layers
-
-
- Couldn't load Python support library: %1
-
Couldn't load Python support library: %1
+
+
+ Couldn't resolve python support library's instance() symbol.
-
- Python support ENABLED :-)
-
- There is a new version of QGIS available
Hi ha una versió nova disponible del QGIS
- You are running a development version of QGIS
-
- You are running the current version of QGIS
-
- Would you like more information?
-
- QGIS Version Information
- Informació de la versió del QGIS
- QGIS - Changes since last release
-
- Unable to get current version information from server
-
-
- Connection refused - server may be down
-
-
- QGIS server was not found
-
-
- Unknown network socket error: %1
-
Connection refused - server may be down
+
+
+ QGIS server was not found
+
+
+ Unknown network socket error: %1
+
+
+ Unable to communicate with QGIS Version server
%1
-
- To perform a full histogram stretch, you need to have a raster layer selected.
-
- To change brightness or contrast, you need to have a raster layer selected.
-
- en
documentation language
-
- Layer is not valid
-
- The layer %1 is not a valid layer and can not be added to the map
-
- The layer is not a valid layer and can not be added to the map
-
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
- Save?
Voleu desar?
- Current CRS: %1 (OTFR enabled)
-
- Current CRS: %1 (OTFR disabled)
-
- Map coordinates for the current view extents
-
- Map coordinates at mouse cursor position
-
- Extents:
-
- Maptips require an active layer
-
- %n feature(s) selected on layer %1.
number of selected features
-
-
+
- Open a GDAL Supported Raster Data Source
-
- Error adding valid layer to map canvas
-
- Raster layer
-
- %1 is not a supported raster data source
-
- Unsupported Data Source
-
- Exit QGIS
Surt del QGIS
- Do you really want to quit QGIS?
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
-
- <tt>Settings:Options:General</tt>
Menu path to setting options
-
- Warn me when opening a project file saved with an older version of QGIS
-
- Project file is older
-
- This project file was saved by an older version of QGIS
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
-
- Warning
- Avís
+
- This layer doesn't have a properties dialog.
-
- Authentication required
-
- Proxy authentication required
-
- SSL errors occured accessing URL %1:
-
-
Always ignore these errors?
-
- %n SSL errors occured
number of errors
-
-
+
@@ -13187,7 +13152,7 @@ Always ignore these errors?
Attributes changed
-
@@ -13205,25 +13170,28 @@ Always ignore these errors?
License
- Llicència
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
QGIS is licensed under the GNU General Public License
- El QGIS està subjecte a la Llicència Pública General GNU
http://www.gnu.org/licenses
- http://www.gnu.org/licenses
Join our user mailing list
- Uneix-te a la nostra llista de correu d'usuaris
about:blank
- about:blank
Providers
- Proveïdors
Developers
- Desenvolupadors
Essen (Germany), Developer meeting 2012
- Essen (Alemanya), Trobada de desenvolupadors 2012
Contributors
- Col·laboradors
Translators
- Traductors
Donors
- Donants
<p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
- <p>Per obtenir una llista de persones i institucions que han contribuït econòmicament a finançar el desenvolupament del QGIS i d'altres costos del projecte, consulta <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
Available QGIS Data Provider Plugins
- Connectors dels proveïdors de dades del QGIS disponibles
Available Qt Database Plugins
- Connectors de Qt Database disponibles
Available Qt Image Plugins
- Connectors de Qt Image disponibles
Qt Image Plugin Search Paths <br>
- Rutes de cerca dels connectors de Qt Image <br>
@@ -13307,12 +13275,12 @@ p, li { white-space: pre-wrap; }
Warning
- Avís
+
Invalid field name. This field name is reserved and cannot be used.
-
@@ -13320,33 +13288,33 @@ p, li { white-space: pre-wrap; }
Add column
- Afegeix una columna
+
N&ame
-
Comment
-
Type
- Tipus
+
Width
- Amplada
+
Precision
-
@@ -13354,32 +13322,32 @@ p, li { white-space: pre-wrap; }
Add vector join
-
Join layer
-
Join field
-
Target field
- Camp objectiu
+
Create attribute index on join field
-
Cache join layer in virtual memory
-
@@ -13387,7 +13355,7 @@ p, li { white-space: pre-wrap; }
Add tab or group for %1
-
@@ -13395,27 +13363,27 @@ p, li { white-space: pre-wrap; }
Dialog
- Diàleg
+
Create category
-
as
-
a tab
-
a group in container
-
@@ -13423,12 +13391,12 @@ p, li { white-space: pre-wrap; }
Select frame color
-
Select background color
-
@@ -13436,32 +13404,32 @@ p, li { white-space: pre-wrap; }
Form
- Formulari
+
Fixed map position
-
Map marker
-
Frame width
-
Background color
-
Frame color
-
@@ -13469,12 +13437,12 @@ p, li { white-space: pre-wrap; }
&Expand All
-
&Collapse All
-
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As Layer Definition File...
-
&Filter...
-
&Properties
-
Copy Style
-
Paste Style
-
QgsApplication
- Exception
-
- unknown exception
-
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13582,65 +13550,65 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
-
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
-
- Migration of private qgis.db failed.
%1
-
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
Composició
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
@@ -13649,35 +13617,35 @@ User DB Path: %9
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Expression based filename
-
Atlas preview
-
No matching atlas features found!
-
Expression based filter
-
@@ -13700,49 +13668,49 @@ Parser error:
Coverage layer
-
Hidden coverage layer
-
Sort by
-
Sort direction
-
...
-
Filter with
-
Output
-
Single file export when possible
-
Output filename expression
-
@@ -13751,47 +13719,47 @@ Parser error:
Select an action
File dialog window title
-
Insert expression
-
Missing Information
-
To create an attribute action, you must provide both a name and the action to perform.
-
Echo attribute's value
-
Run an application
-
Get feature id
-
Selected field's value (Identify features tool)
-
Clicked coordinates (Run feature actions tool)
-
Search on web based on attribute's value
-
@@ -13809,90 +13777,90 @@ Parser error:
Attribute Actions
-
Action list
-
This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
-
Type
- Tipus
+
Name
- Nom
+
Action
- Acció
+
Capture
-
Remove the selected action
-
Move the selected action up
-
Move the selected action down
-
Add default actions
-
Action properties
-
Generic
-
Python
-
Mac
-
Windows
-
Unix
-
Captures any output from the action
-
Captures the standard output or error generated by the action and displays it in a dialog box
-
Capture output
-
Enter the name of an action here. The name should be unique (qgis will make it unique if necessary).
-
Enter the action name here
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Enter the action command here
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Browse for action
-
Click to browse for an action
-
Clicking the button will let you select an application to use as the action
-
...
-
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
-
Inserts the selected field into the action
-
Insert field
-
Inserts the action into the list above
-
Add to action list
-
Update the selected action
-
Update selected action
-
@@ -14011,7 +13979,7 @@ Parser error:
Feature Attributes
-
@@ -14019,7 +13987,7 @@ Parser error:
Attributes changed
-
@@ -14027,39 +13995,39 @@ Parser error:
Load values from layer
-
Layer
- Capa
+
Description
- Descripció
+
Value
- Valor
+
Select data from attributes in selected layer.
-
View All
-
Insert NULL value on top
-
@@ -14067,12 +14035,12 @@ Parser error:
Ascending
-
Descending
-
@@ -14080,22 +14048,22 @@ Parser error:
Select attributes
-
Columns
- Columnes
+
Reset
- Reinicia
+
Sorting
-
@@ -14103,7 +14071,7 @@ Parser error:
Attribute changed
-
@@ -14111,93 +14079,93 @@ Parser error:
Attribute Table
-
Case sensitive
-
?
-
Delete selected features (DEL)
-
Unselect all (Ctrl+U)
-
Ctrl+U
-
Move selection to top (Ctrl+T)
-
Ctrl+T
-
Invert selection (Ctrl+R)
-
Ctrl+S
-
Copy selected rows to clipboard (Ctrl+C)
-
Ctrl+C
-
Zoom map to the selected rows (Ctrl+J)
-
Ctrl+J
-
Pan map to the selected rows (Ctrl+P)
-
Ctrl+P
-
Toggle editing mode (Ctrl+E)
-
Ctrl+E
-
...
-
Select features using an expression
-
Ctrl+W
-
Filter
-
Filters the visible features according to the current filter selection and filter string.
-
Apply
-
mMainViewButtonGroup
-
Table View
-
=
-
Update All
-
Advanced Filter (Expression)
-
Use the Expression Builder to define the filter
-
Ctrl+F
-
Show All Features
-
Show Selected Features
-
Show Edited and New Features
-
Show Features Visible On Map
-
The filter defines which features are currently shown in the list or on the table
-
Form View
-
Column Filter
-
Filter all the features which have been edited but not yet saved
-
Delete column (Ctrl+L)
-
Ctrl+L
-
Open field calculator (Ctrl+I)
-
Ctrl+I
-
Attribute table - %1 (%n Feature(s))
feature count
-
-
+
Parsing error
-
Evaluation error
-
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
-
Update Filtered
-
Error
- Error
+
An error occured while evaluating the calculation string:
%1
-
Expression based filter
-
Attribute added
-
Attribute Error
-
The attribute could not be added to the layer
-
Deleted attribute
-
The attribute(s) could not be deleted
-
Attribute error
-
Error filtering
-
Geometryless feature added
-
@@ -14435,7 +14399,7 @@ Parser error:
feature id
-
@@ -14443,7 +14407,7 @@ Parser error:
Select All
-
@@ -14451,17 +14415,17 @@ Parser error:
Edit Widget Properties
-
Editable
-
Label on top
-
@@ -14469,67 +14433,67 @@ Parser error:
Normal
-
Lighten
-
Screen
-
Dodge
-
Addition
-
Darken
-
Multiply
-
Burn
-
Overlay
-
Soft light
-
Hard light
-
Difference
-
Subtract
-
@@ -14542,18 +14506,18 @@ Parser error:
&Delete
-
&Zoom to
-
Error
- Error
+
ID
-
Name
- Nom
+
xMin
-
yMin
-
xMax
-
yMax
-
SRID
- SRID
+
New bookmark
-
Unable to create the bookmark.
Driver:%1
Database:%2
-
Really Delete?
-
Are you sure you want to delete %n bookmark(s)?
number of rows
-
-
+
Empty extent
-
Reprojected extent is empty.
-
@@ -14646,7 +14606,7 @@ Database:%2
Geospatial Bookmarks
-
@@ -14654,22 +14614,22 @@ Database:%2
WMS
-
Cannot get WMS select dialog from provider.
-
CRS
-
Cannot set layer CRS
-
@@ -14677,37 +14637,37 @@ Database:%2
QGIS Browser
-
Param
-
Metadata
-
Preview
-
Stop rendering
-
Attributes
-
toolBar
-
Ctrl+Shift+N
-
Refresh
-
F5
- F5
+
Set layer CRS
-
Manage WMS
-
Manage WMS Connections
-
Ctrl+Shift+W
-
@@ -14756,12 +14716,12 @@ Database:%2
Dialog
- Diàleg
+
Path
-
@@ -14769,27 +14729,27 @@ Database:%2
Case Sensitive
-
Filter Pattern Syntax
-
Normal
-
Wildcard(s)
-
Regular Expression
-
Remove favourite
-
Properties
-
Fast scan this dir.
-
Error
- Error
+
Layer Properties
-
Directory Properties
-
@@ -14853,13 +14813,13 @@ Database:%2
Browser
-
Refresh
-
Filter Files
-
...
-
Collapse All
-
Options
- Opcions
+
Filter files
-
@@ -14903,27 +14863,27 @@ Database:%2
Dialog
- Diàleg
+
Display Name
-
Layer Source
-
Provider
-
Metadata
-
@@ -14931,17 +14891,17 @@ Database:%2
Project home
-
Home
-
Favourites
-
@@ -14949,77 +14909,77 @@ Database:%2
Solid
-
No Brush
-
Horizontal
-
Vertical
-
Cross
-
BDiagonal
-
FDiagonal
-
Diagonal X
-
Dense 1
-
Dense 2
-
Dense 3
-
Dense 4
-
Dense 5
-
Dense 6
-
Dense 7
-
@@ -15027,7 +14987,7 @@ Database:%2
QGIS
-
@@ -15035,40 +14995,40 @@ Database:%2
Form
- Formulari
+
A calendar widget to enter a date.
-
Date format
-
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
-
- Value
- Valor
+
- Label
-
@@ -15076,32 +15036,32 @@ Database:%2
Column
- Columna
+
Symbol
-
Change...
-
Color ramp
-
Invert
-
Classify
-
Delete
-
Delete all
-
Join
-
Advanced
-
- Random colors
-
- Symbol levels...
-
- High number of classes!
-
- Classification would yield %1 entries which might not be expected. Continue?
-
- Error
- Error
+
- There are no available color ramps. You can add them in Style Manager.
-
+
+ The selected color ramp is not available.
+
The selected color ramp is not available.
-
-
- Confirm Delete
-
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
-
@@ -15181,17 +15141,17 @@ Should the existing classes be deleted before classification?
Character Selector
-
Font:
-
Current font family and style
-
@@ -15199,17 +15159,17 @@ Should the existing classes be deleted before classification?
Form
- Formulari
+
Representation for checked state
-
Representation for unchecked state
-
@@ -15217,35 +15177,30 @@ Should the existing classes be deleted before classification?
Shift-click to expand, then collapse others
-
Ctrl (or Alt)-click to toggle all
-
QgsColorButton
- Select Color
-
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -15253,7 +15208,7 @@ Should the existing classes be deleted before classification?
Select Color
-
@@ -15262,12 +15217,12 @@ Should the existing classes be deleted before classification?
Random colors
-
New color ramp...
-
@@ -15275,12 +15230,12 @@ Should the existing classes be deleted before classification?
Show compass
-
&About
- &Quant a
+ Quant &a
@@ -15288,7 +15243,7 @@ Should the existing classes be deleted before classification?
Pixmap not found
-
@@ -15296,12 +15251,12 @@ Should the existing classes be deleted before classification?
Internal Compass
-
Azimut
-
@@ -15314,11 +15269,11 @@ Should the existing classes be deleted before classification?
QGIS
-
Composer
Composició
@@ -15330,83 +15285,83 @@ Should the existing classes be deleted before classification?
Cu&t
-
Cut
-
&Copy
-
Copy
- Copia
+
&Paste
-
Paste
-
Edit
- Edita
+
Normal
-
Simulate Photocopy (Grayscale)
-
Simulate photocopy (grayscale)
-
Simulate Fax (Mono)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
Panels
-
Toolbars
-
Layout
-
Atlas
-
Settings
-
Window
-
%1%
-
Set as atlas feature for %1
-
x: %1 mm
-
y: %1 mm
-
page: %3
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
Choose a file name to save the map as
Trieu un nom de fitxer per desar-hi el mapa
PDF Format
-
Empty filename pattern
-
The filename pattern is empty. A default one will be used.
-
Unable to write into the directory
-
The given output directory is not writable. Cancelling.
-
Atlas processing error
-
Feature filter parser error: %1
-
Error creating %1.
-
Rendering maps...
-
Abort
-
- Big image
-
- To create image %1x%2 requires about %3 MB of memory. Proceed?
-
- Choose a file name to save the map image as
Trieu un nom de fitxer per desar-hi la imatge del mapa
- Memory Allocation Error
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
-
- Image export error
-
- Directory where to save image files
Directori on desar els fitxers d'imatge
- Image format:
-
- SVG warning
-
- Don't show this message again
No tornis a mostrar aquest missatge
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
-
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
-
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
-
- SVG Format
-
- Directory where to save SVG files
Directori on desar els fitxers SVG
- SVG export error
-
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
-
- Duplicating composer...
S'està duplicat la composició...
- Duplicate Composer
Duplica la composició
- Composer duplication failed.
La duplicació de la composició ha fallat.
- Save template
Desa la plantilla
- Composer templates
Plantilles de composició
- Save error
-
- Error, could not save file
-
- Load template
-
- Read error
-
- Error, could not read file
-
- Composer error
S'ha produït un error en la composició
- Error, could not create new composer
S'ha produït un error, no s'ha pogut crear la composició nova
- Loading template into composer...
S'esta carregant la plantilla a la composició...
- Project contains WMS layers
-
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
-
- Project contains composition effects
El projecte conté efectes de composició
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
-
- Print as raster
-
- Landscape
-
@@ -15816,51 +15771,51 @@ Please try a lower resolution or a smaller papersize
Arrow outline width
-
Arrowhead width
-
Arrow color changed
-
Select arrow color
-
Arrow marker changed
-
Arrow start marker
-
Arrow end marker
-
Start marker svg file
-
End marker svg file
-
@@ -15868,74 +15823,74 @@ Please try a lower resolution or a smaller papersize
Form
- Formulari
+
Arrow
-
Main properties
-
Line width
-
mm
-
Arrow head width
-
Color...
-
Arrow markers
-
Default
-
None
-
SVG
-
Start marker
-
...
-
End marker
-
@@ -15943,32 +15898,32 @@ Please try a lower resolution or a smaller papersize
Center
-
Right
-
Left
-
Attribute
-
Heading
-
Alignment
- Alineació
+
@@ -15976,7 +15931,7 @@ Please try a lower resolution or a smaller papersize
MainWindow
-
Paper Navigation
-
Atlas
-
&Print...
-
Ctrl+P
-
Zoom Full
-
Zoom full
-
Ctrl+0
-
Zoom In
-
Zoom in
-
Ctrl++
-
Zoom Out
-
Zoom out
-
Ctrl+-
-
Zoom to 100%
-
Ctrl+1
-
Zoom
-
Move Item
-
Select/Move item
-
Refresh
-
Refresh view
-
Show Grid
-
Show grid
-
Ctrl+'
-
Snap to Grid
-
Snap to grid
-
Ctrl+Shift+'
-
Show Guides
-
Show guides
-
Ctrl+;
-
Snap to Guides
-
Snap to guides
-
Ctrl+Shift+;
-
Smart Guides
-
Smart guides
-
Ctrl+Alt+;
-
Clear Guides
-
Clear guides
-
Move Content
-
Move item content
-
Group
-
Group items
-
Ctrl+G
-
Ungroup
-
Ungroup items
-
Ctrl+Shift+G
-
Raise
-
Raise selected items
-
Ctrl+]
-
Lower
-
Lower selected items
-
Ctrl+[
-
Bring to Front
-
Move selected items to top
-
Ctrl+Shift+]
-
Send to Back
-
Move selected items to bottom
-
Ctrl+Shift+[
-
Load from Template
-
Load from template
-
&Quit
-
Quit
-
Ctrl+Q
-
Page Setup
-
Page setup
-
Ctrl+Shift+P
-
Ctrl+Shift+L
-
Pa&ste in Place
-
Paste in place
-
Ctrl+Shift+V
-
&Delete
-
Delete selected items
-
Del
-
De&select All
-
Deselect all
-
Ctrl+Shift+A
-
Select &All
-
Select all items
-
Ctrl+A
-
&Invert Selection
-
Invert selection
-
Select Next Item &Below
-
Select next item below
-
Ctrl+Alt+[
-
Select Next Item &Above
-
Select next item above
-
Ctrl+Alt+]
-
Show Rulers
-
Show rulers
-
Ctrl+R
-
First Feature
-
Previous Feature
-
Next Feature
-
Last Feature
-
Preview Atlas
-
Print Atlas...
-
Export Atlas as PDF...
-
Export Atlas as PDF
-
Atlas Settings
-
Ctrl+Z
-
Ctrl+Shift+Z
-
Ctrl+N
-
Ctrl+S
-
Lock Selected Items
-
Ctrl+L
-
Unlock All
-
Unlock All Items
-
@@ -16821,17 +16776,17 @@ Please try a lower resolution or a smaller papersize
Left
-
Center
-
Right
-
@@ -16839,12 +16794,12 @@ Please try a lower resolution or a smaller papersize
Ascending
-
Descending
-
@@ -16852,42 +16807,42 @@ Please try a lower resolution or a smaller papersize
Use existing frames
-
Extend to next page
-
Repeat on every page
-
Repeat until finished
-
Change html url
-
Select HTML document
-
Change resize mode
-
Use smart breaks changed
-
@@ -16895,125 +16850,125 @@ Please try a lower resolution or a smaller papersize
HTML Frame
-
HTML frame
-
Main properties
-
URL
-
...
-
Resize mode
-
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
-
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
-
- Background color changed
-
- Item position changed
-
- Item outline width
-
- Item frame join style
-
- Item frame toggled
-
- Item background toggled
-
- Select background color
-
- Select frame color
-
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
-
- Item rotation changed
-
@@ -17021,120 +16976,109 @@ Please try a lower resolution or a smaller papersize
Global Options
-
- Position and size
-
- Reference point
-
- X
- X
+
- Y
- Y
+
- Width
- Amplada
+
- Height
- Alçada
+
- Page
-
- ...
-
-
- Rotation
-
- °
-
- Frame
-
- mm
-
- Join style
-
- Rendering
-
- Blending mode
-
- Thickness
-
- Color...
-
- Background
-
- Transparency
-
- Item ID
-
- Id
-
@@ -17142,41 +17086,41 @@ Please try a lower resolution or a smaller papersize
Label text HTML state changed
-
Label text changed
-
Label font changed
-
Label margin changed
-
Label color changed
-
- Insert expression
-
- Label alignment changed
S'ha canviat l'alineació de l'etiqueta
@@ -17186,37 +17130,37 @@ Please try a lower resolution or a smaller papersize
Label Options
-
Label
-
Main properties
-
Render as HTML
-
Insert an expression
-
Font
-
Font color...
-
Vertical
-
Top
-
Middle
-
Bottom
-
Left
-
Center
-
Right
-
Horizontal
-
Display
-
Margin
-
mm
-
+
+
+ QgsComposerLegend
+
+ Legend
+
@@ -17289,7 +17241,7 @@ Please try a lower resolution or a smaller papersize
Item text
-
@@ -17305,150 +17257,150 @@ Please try a lower resolution or a smaller papersize
Item
-
Title style
-
Item wrapping changed
-
Legend title changed
-
Legend title alignment changed
-
Legend column count
-
Legend split layers
-
Legend equal column width
-
Legend symbol width
-
Legend symbol height
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
Legend group space
-
Legend layer space
-
Legend symbol space
-
Legend icon label space
-
Title font changed
-
Legend group font changed
-
Legend layer font changed
-
Legend item font changed
-
Legend font color changed
-
Legend box space
-
Legend map changed
-
Legend item edited
-
Legend updated
-
Legend group added
-
-
- Map %1
-
Map %1
+
+
+ None
-
@@ -17456,37 +17408,37 @@ Please try a lower resolution or a smaller papersize
Legend Options
-
Legend
-
Main properties
-
&Title
-
Map
-
Wrap text on
-
Legend items
-
Show feature count for each class of vector layer.
-
Fonts
-
Space above text using subgroup style.
-
Subgroup space
-
Space above symbol and symbol label.
-
Column space
-
Font color...
-
Count
-
Equal column widths
-
Allow to split layer items into multiple columns.
-
Split layers
-
Spacing
-
mm
-
Title alignment:
-
Left
-
Center
-
Right
-
Update legend. User defined labels are preserved.
-
Update item
-
Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
-
Update all
-
...
-
Auto update
-
Title font...
-
Subgroup font...
-
Group font...
-
Item font...
-
Symbol
-
Symbol width
-
Symbol height
-
WMS LegendGraphic
-
Legend width
-
Legend height
-
Space above text using group style.
-
Group Space
-
Symbol space
-
Space between symbol icon and symbol label (symbol label left margin).
-
Icon label space
-
Box space
-
Space below title.
-
Title space
-
@@ -17752,17 +17704,17 @@ Please try a lower resolution or a smaller papersize
Template error
-
Error, template file not found
-
Error, could not read file
-
Error, could not load template file
-
Choose template
-
File system error
-
Error, could not open or create local directory
-
copy
-
...
-
QgsComposerMap
- Map %1
-
- Map will be printed here
-
-
- Grid %1
-
QgsComposerMapWidget
- Cache
-
- Render
-
+
+ Rectangle
+
Rectangle
- Solid
+
- Solid
- Cross
+
Cross
- Decimal
+
Markers
- DegreeMinute
+
- Decimal
- DegreeMinuteSecond
+
+
+ No frame
+
+
+ Zebra
+
+
+ Map scale changed
+
+
+ Map rotation changed
+
+
+ Map extent changed
+
DegreeMinute
-
-
- DegreeMinuteSecond
-
-
- Zebra
-
-
- Map scale changed
-
-
- Map rotation changed
-
-
- Map extent changed
-
-
- Select font color
-
Select grid frame color
-
Select grid frame fill color
-
- Canvas items toggled
-
- None
-
- Overview frame style changed
-
- Overview centering mode changed
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- change...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
-
- Grid interval changed
-
- Grid offset changed
-
- Grid line style changed
-
- Grid type changed
-
- Grid cross width changed
+
+
+ Annotation font changed
-
- Label font changed
+
+
+ Annotation distance changed
-
- Annotation format changed
-
- Annotation toggled
-
- Changed annotation precision
-
- Changed grid frame style
-
- Changed grid frame width
+
+
+ Changed grid frame line thickness
-
- Grid frame color changed
-
- Grid frame first fill color changed
-
- Grid frame second fill color changed
-
- Inside frame
-
- Outside frame
-
- Disabled
-
- Horizontal
-
- Vertical
-
- Annotation position changed
-
- Changed annotation direction
-
- Map %1
-
@@ -18214,374 +18104,292 @@ Please try a lower resolution or a smaller papersize
Map Options
-
- Map
-
- Main properties
-
- Update preview
-
- Scale
-
- Map rotation
-
- Draw map canvas items
-
- Lock layers for map item
-
- Extents
-
- X max
-
- Y min
- Y mín.
+
- Y max
- Y màx.
+
+
+ Set to map canvas extent
+
+
+ X min
+
+
+ View extent in map canvas
+
+
+ Controlled by atlas
+
+
+ Margin around feature
+
Set to map canvas extent
-
-
- X min
- X mín.
-
-
- View extent in map canvas
-
-
- Controlled by atlas
-
-
- Margin around feature
-
-
- %
- %
+
- Fixed scale
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
- Predefined scale (best fit)
-
- Show grid
+
+
+ Grid &type
+
+
+ Offset
-
- mm
-
- Blend mode
-
- Interval
-
- Grid frame
-
- Frame size
-
- Frame line thickness
-
+
+ Color...
+
+
+ Frame fill colors
+
+
+ Overview blending mode
+
+
+ Invert overview
+
+
+ Center on overview
+
+
+ X
+
+
+ °
+
+
+ Y
+
+
+ Cross width
+
+
+ Frame style
+
+
+ Line style
+
+
+ change...
+
+
+ Draw coordinates
+
+
+ Format
+
+
+ Left
+
+
+ Right
+
Color...
- Top
+
- Frame fill colors
- Bottom
+
- Marker style
-
-
- Overview blending mode
-
-
- Invert overview
-
-
- Center on overview
-
-
- X
-
-
- °
-
-
- Y
-
-
- Cross width
- Font
+
Frame style
-
-
- Line style
-
-
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
-
-
- CRS
-
-
- change...
-
-
- Interval units
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- No frame
-
-
- Zebra
-
-
- Draw coordinates
-
-
- Format
-
-
- Left
-
-
- Right
-
-
- Top
-
-
- Bottom
-
-
- Font
-
-
- Font...
-
- Font color
-
-
- Distance to map frame
-
- Coordinate precision
-
- Font color...
-
- Overview
-
- Overview frame
-
- Overview style
-
- Change...
-
@@ -18589,51 +18397,51 @@ Please try a lower resolution or a smaller papersize
Change item position
-
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
Composició
- Picture expression eval error: %1
-
@@ -18641,71 +18449,71 @@ Please try a lower resolution or a smaller papersize
Select svg or image file
-
Picture changed
-
- Expression based image path
-
- Picture rotation changed
-
- Select new preview directory
-
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
-
- Rotation map changed
-
- Map %1
-
- Creating icon for file %1
-
@@ -18713,138 +18521,138 @@ Please try a lower resolution or a smaller papersize
Picture Options
-
Picture
-
Main properties
-
Image source
-
Path
-
...
-
Expression
-
Resize mode
-
Placement
-
Zoom
-
Stretch
-
Clip
-
Zoom and resize frame
-
Resize frame to image size
-
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
-
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Search directories
-
Loading previews...
-
Image search paths
-
Remove
- Suprimeix
+
Image rotation
-
Sync with map
-
°
-
QgsComposerScaleBar
- units
-
- km
-
- m
-
- miles
-
- ft
-
- Nm
-
QgsComposerScaleBarWidget
Single Box
-
Double Box
-
Line Ticks Middle
-
Line Ticks Down
-
Line Ticks Up
-
Numeric
-
Left
-
Middle
-
Right
-
Map units
-
Meters
-
Feet
-
Nautical Miles
-
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
-
-
- Select stroke color
-
-
- Map %1
-
- Scalebar map changed
S'ha canviat la barra d'escala del mapa
- Scalebar line width
Amplada de la línia de la barra d'escala
- Scalebar segment size
Mida del segment de la barra d'escala
- Scalebar segments left
-
- Number of scalebar segments changed
S'ha canviat el nombre de segments de la barra d'escala
- Scalebar height changed
S'ha canviat l'alçada de la barra d'escala
- Scalebar font changed
S'ha canviat el tipus de lletra de la barra d'escala
- Scalebar font color changed
S'ha canviat el color del tipus de lletra de la barra d'escala
- Scalebar color changed
S'ha canviat el color de la barra d'escala
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
-
- Scalebar unit text
-
- Scalebar map units per segment
-
- Scalebar style changed
S'ha canviat l'estil de la barra d'escala
- Scalebar label bar space
-
- Scalebar box content space
-
- Scalebar alignment
Alineació de la barra d'escala
- Scalebar changed to map units
S'ha canviat la barra d'escala a les unitats del mapa
- Scalebar changed to feet
S'ha canviat la barra d'escala a peus
- Scalebar changed to nautical miles
S'ha canviat la barra d'escala a milles nàutiques
- Scalebar changed to meters
S'ha canviat la barra d'escala a metres
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -19132,63 +18915,63 @@ Please try a lower resolution or a smaller papersize
Main properties
-
Map
-
Style
-
Units
-
Label
-
Map units per bar unit
-
Segments
-
left
-
right
-
Size
-
units
-
Height
- Alçada
+
mm
-
Display
-
Box margin
-
Labels margin
-
Line width
-
Join style
-
Cap style
-
Fonts and colors
-
Font...
-
Font color...
-
Fill color...
-
Secondary fill color...
-
-
- Stroke color...
-
@@ -19269,39 +19047,39 @@ Please try a lower resolution or a smaller papersize
Ellipse
-
Rectangle
-
Triangle
-
- Shape style changed
-
- Shape radius changed
-
- Shape type changed
-
@@ -19309,37 +19087,37 @@ Please try a lower resolution or a smaller papersize
Form
- Formulari
+
Shape
-
Main properties
-
Corner radius
-
mm
-
Style
-
Change...
-
@@ -19347,22 +19125,22 @@ Please try a lower resolution or a smaller papersize
Descending
-
Ascending
-
Attribute
-
Sort Order
-
@@ -19371,49 +19149,49 @@ Please try a lower resolution or a smaller papersize
Map %1
-
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
-
Table header alignment changed
-
Table layer changed
-
Table attribute settings
-
Table map changed
-
Table maximum columns
-
Select Font
-
Table header font
-
Table content font
-
Table grid stroke
-
Select grid color
-
Table grid color
-
Table grid toggled
-
Table visible only toggled
-
@@ -19464,27 +19242,27 @@ Please try a lower resolution or a smaller papersize
Attribute Table
-
Attribute table
-
Main properties
-
Layer
- Capa
+
Attributes...
-
Maximum rows
-
Margin
-
Show only visible features
-
Refresh table data
-
Filter with
-
...
-
mm
-
Show grid
-
Stroke width
-
Color...
-
Fonts
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
-
Center
-
Right
-
@@ -19588,47 +19366,47 @@ Please try a lower resolution or a smaller papersize
Vector Legend Options
-
Preview
-
Map
-
Title
-
Layers
-
Group
-
ID
-
Box
-
Font
-
@@ -19636,7 +19414,7 @@ Please try a lower resolution or a smaller papersize
QGIS
-
Move item content
-
Item moved
-
Zoom item content
-
QgsComposition
- Label added
S'ha afegit una etiqueta
- Map added
S'ha afegit un mapa
- Arrow added
S'ha afegit una fletxa
- Scale bar added
S'ha afegit una barra d'escala
- Shape added
S'ha afegit una forma
- Picture added
S'ha afegit una imatge
- Legend added
S'ha afegit una llegenda
- Table added
S'ha afegit una taula
- Aligned items left
S'ha alineat elements a l'esquerra
- Aligned items horizontal center
S'ha alineat elements al centre horitzontal
- Aligned items vertical center
S'ha alineat elements al centre vertical
- Aligned items right
S'ha alineat elements a la dreta
- Aligned items top
S'ha alineat elements amunt
- Aligned items bottom
S'ha alineat elements abaix
- Items locked
-
- Items unlocked
-
- Item z-order changed
-
- Remove item group
-
- Frame deleted
-
- Item deleted
-
- Multiframe removed
-
@@ -19825,32 +19603,32 @@ Please try a lower resolution or a smaller papersize
Paper
-
Size
-
Units
-
Width
- Amplada
+
Height
- Alçada
+
Orientation
-
@@ -19858,159 +19636,159 @@ Please try a lower resolution or a smaller papersize
mm
-
inch
-
Landscape
-
Portrait
-
Map %1
-
- A5 (148x210 mm)
-
- A4 (210x297 mm)
-
- A3 (297x420 mm)
-
- A2 (420x594 mm)
-
- A1 (594x841 mm)
-
- A0 (841x1189 mm)
-
- B5 (176 x 250 mm)
-
- B4 (250 x 353 mm)
-
- B3 (353 x 500 mm)
-
- B2 (500 x 707 mm)
-
- B1 (707 x 1000 mm)
-
- B0 (1000 x 1414 mm)
-
- Legal (8.5x14 in)
-
- ANSI A (Letter; 8.5x11 in)
-
- ANSI B (Tabloid; 11x17 in)
-
- ANSI C (17x22 in)
-
- ANSI D (22x34 in)
-
- ANSI E (34x44 in)
-
- Arch A (9x12 in)
-
- Arch B (12x18 in)
-
- Arch C (18x24 in)
-
- Arch D (24x36 in)
-
- Arch E (36x48 in)
-
- Arch E1 (30x42 in)
-
- Custom
-
@@ -20023,118 +19801,112 @@ Please try a lower resolution or a smaller papersize
Paper and quality
-
- Presets
-
- ...
-
-
- Width
- Amplada
+
- Height
- Alçada
+
- Units
-
- Number of pages
-
- Orientation
-
- Export resolution
-
- Print as raster
-
-
- Snap tolerance
-
-
- px
-
Change...
-
- Page background
-
- Grid
+
+
+ dpi
-
- World file on
-
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
-
- Grid offset
-
- x:
-
- y:
-
+
+ Spacing
+
+
+ Snap to alignments
+
+
+ Tolerance
+
@@ -20142,38 +19914,38 @@ Please try a lower resolution or a smaller papersize
Configure shortcuts
-
Action
- Acció
+
Shortcut
-
Change
-
Set none
-
Set default
-
Load...
-
XML file
-
All files
-
Saving shortcuts
-
Cannot write file %1:
%2.
-
Load shortcuts
-
Loading shortcuts
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an shortcuts exchange file.
-
The file contains shortcuts created with different locale, so you can't use it.
-
None
-
Set default (%1)
-
Input:
-
Shortcut conflict
-
This shortcut is already assigned to action %1. Reassign?
-
@@ -20274,7 +20046,7 @@ Please try a lower resolution or a smaller papersize
Error starting help viewer [%1]
-
<h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
-
@@ -20292,35 +20064,35 @@ Please try a lower resolution or a smaller papersize
The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
CRS
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
inverse transform
-
forward transform
-
%1 of
%2PROJ.4: %3 +to %4
Error: %5
-
@@ -20328,12 +20100,12 @@ Error: %5
Name
- Nom
+
Info
- Informació
+
@@ -20341,27 +20113,27 @@ Error: %5
colors
-
discrete
-
continuous
-
continuous (multi)
-
variants
-
@@ -20369,24 +20141,24 @@ Error: %5
Selections by theme
-
All by author
-
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
All Ramps (%1)
-
%1 directory details
-
%1 gradient details
-
@@ -20419,48 +20191,48 @@ and current file is [%3]
cpt-city color ramp
-
Selection and preview
-
License
- Llicència
Palette
-
Path
-
Information
- Informació
+
Author(s)
-
Source
-
Details
-
Enter Credentials
-
Password
-
TextLabel
-
Realm
-
@@ -20502,7 +20274,7 @@ and current file is [%3]
Control rendering order
-
@@ -20513,12 +20285,12 @@ and current file is [%3]
QGIS Custom Projection
-
This proj4 projection definition is not valid.
-
The proj4 definition of '%1' is not valid.
-
Northing and Easthing must be in decimal form.
-
Internal Error (source projection invalid?)
-
Error
- Error
+
@@ -20552,78 +20324,78 @@ and current file is [%3]
Custom Coordinate Reference System Definition
-
Define
-
ID
-
You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
-
Name
- Nom
+
Parameters
- Paràmetres
+
Test
-
Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
-
Geographic / WGS84
-
Destination CRS
-
North
-
East
-
Name:
-
Parameters:
-
Copy
existing CRS
-
Remove
- Suprimeix
+
Calculate
-
@@ -20646,29 +20418,29 @@ and current file is [%3]
Object name
-
Label
-
Description
- Descripció
+
Choose a customization INI file
-
Customization files (*.ini)
-
@@ -20676,27 +20448,27 @@ and current file is [%3]
Customization
-
Enable customization
-
toolBar
-
Catch
-
Switch to catching widgets in main application
-
Load
-
Load from file
-
Expand All
-
Collapse All
-
Select All
-
@@ -20739,17 +20511,17 @@ and current file is [%3]
Dash space pattern
-
Dash
-
Space
-
@@ -20757,232 +20529,232 @@ and current file is [%3]
Description...
-
Edit...
-
Paste
-
Copy
- Copia
+
Clear
-
string
-
int
-
double
-
Field type:
-
integer
-
unknown type
-
Data defined override
-
expression
-
field
- camp
+
Deactivate
-
Activate
-
Attribute field
-
No matching field types found
-
Expression
-
Current:
-
Data definition description
-
undefined
-
Parse error: %1
-
'%1' field missing
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
yes
-
no
-
<b>Usage:</b><br>%1<br>
-
<b>Expected input:</b><br>%1<br>
-
<b>Valid input types:</b><br>%1<br>
-
<b>Current definition %1:</b><br>%2
-
string
-
bool [<b>1</b>=True|<b>0</b>=False]
-
string of variable length
-
int [<= 0 =>]
-
int [>= 0]
-
int [>= 1]
-
double [<= 0.0 =>]
-
double [>= 0.0]
-
double coord [<b>X,Y</b>] as <= 0.0 =>
-
double [-180.0 - 180.0]
-
int [0-100]
-
string [<b>r,g,b</b>] as int 0-255
-
string [<b>r,g,b,a</b>] as int 0-255
-
@@ -20990,17 +20762,17 @@ and current file is [%3]
Data defined properties
-
Property
-
Expression
-
double
-
'<red>,<green>,<blue>,<alpha>'
-
'<filename>'
-
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -21048,68 +20820,68 @@ and current file is [%3]
Form
- Formulari
+
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
-
Widget display
-
calendar popup
-
default
- per defecte
+
custom
-
preview
-
@@ -21117,13 +20889,13 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
unknown
-
@@ -21131,42 +20903,42 @@ and current file is [%3]
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Destination CRS
-
Source CRS
-
Layer
- Capa
+
@@ -21179,12 +20951,12 @@ and current file is [%3]
Connections
-
Connect
-
Edit
- Edita
+
Delete
-
Load
Load connections from file
-
Also list tables with no geometry
-
Hold dialog open
-
Search options
-
Search
- Cerca
Search mode
-
Search in columns
-
@@ -21253,22 +21025,22 @@ and current file is [%3]
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
@@ -21276,71 +21048,71 @@ and current file is [%3]
Copyright Label Decoration
-
Enable copyright label
-
&Enter your copyright label here:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
&Placement
-
Bottom Left
-
Top Left
-
Bottom Right
-
Top Right
-
&Orientation
-
Horizontal
-
Vertical
-
Color
-
@@ -21351,27 +21123,27 @@ p, li { white-space: pre-wrap; }
Error
- Error
+
No active layer
-
Please select a raster layer
- Seleccioneu una capa ràster
+
Invalid raster layer
-
Layer CRS must be equal to project CRS
-
@@ -21379,122 +21151,122 @@ p, li { white-space: pre-wrap; }
Grid properties
-
Enable grid
-
Interval X
-
Interval Y
-
Grid type
-
Line symbol
-
Draw annotation
-
Annotation direction
-
Font...
-
Distance to map frame
-
Coordinate precision
-
Marker symbol
-
Offset X
-
Offset Y
-
Update Interval / Offset from
-
Canvas Extents
-
Active Raster Layer
-
Line
- Línia
+
Marker
-
Horizontal
-
Vertical
-
Boundary direction
-
Horizontal and Vertical
-
@@ -21502,27 +21274,27 @@ p, li { white-space: pre-wrap; }
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
North arrow pixmap not found
-
@@ -21530,62 +21302,62 @@ p, li { white-space: pre-wrap; }
North Arrow Decoration
-
Preview of north arrow
-
Angle
- Angle
+
Placement
-
Placement on screen
-
Top Left
-
Top Right
-
Bottom Left
-
Bottom Right
-
Enable North Arrow
-
Set direction automatically
-
Pixmap not found
-
@@ -21593,102 +21365,102 @@ p, li { white-space: pre-wrap; }
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
Tick Down
-
Tick Up
-
Bar
-
Box
-
km
-
mm
-
cm
-
m
-
miles
-
mile
-
inches
-
foot
-
feet
-
degree
-
degrees
-
unknown
-
@@ -21701,27 +21473,27 @@ p, li { white-space: pre-wrap; }
Placement
-
Top Left
-
Top Right
-
Bottom Left
-
Bottom Right
-
Tick Down
-
Tick Up
-
Box
-
Bar
-
Color of bar
-
Size of bar
-
Automatically snap to round number on resize
-
metres/km
-
feet/miles
-
degrees
-
@@ -21794,7 +21566,7 @@ p, li { white-space: pre-wrap; }
Delete Attributes
-
@@ -21802,12 +21574,12 @@ p, li { white-space: pre-wrap; }
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -21893,122 +21665,122 @@ p, li { white-space: pre-wrap; }
No layer name
-
Please enter a layer name before adding the layer to the map
-
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Invalid regular expression
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Choose a delimited text file to open
-
Text files
-
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
Regular expression is not valid
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
All files
-
@@ -22016,299 +21788,299 @@ p, li { white-space: pre-wrap; }
Create a Layer from a Delimited Text File
-
File Name
-
Full path to the delimited text file
-
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
-
Layer name
-
Name to display in the map legend
-
Name displayed in the map legend
-
Browse to find the delimited text file to be processed
-
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
-
Browse...
-
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
Tab
-
Space
-
Comma
-
Encoding
- Codificació
+
Select the file encoding
-
X and Y coordinates are expressed in degrees/minutes/seconds
-
DMS coordinates
-
Geometry field
-
Name of the field containing well known text value
-
Geometry type
-
Detect
-
Point
- Punt
+
Line
- Línia
+
Polygon
- Polígon
+
Record options
-
Field options
-
File format
-
Number of header lines to discard
-
The number of lines to discard from the beginning of the file
-
Field names are read from the first record. If not selected then fields are numbered
-
First record has field names
-
CSV (comma separated values)
-
Fields are defined by the specified delimiter, quote, and escape characters
-
Custom delimiters
-
Regular expression delimiter
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use spatial index
-
Use an index to improve performance of subset filters (set in layer properties)
-
Use subset index
-
Watch for changes to the file by other applications while QGIS is running
-
Watch file
-
Geometry definition
-
Geometry is a point defined by X and Y coordinate fields
-
Point coordinates
-
Geometry is read as a well known text string from the selected fields
-
Well known text (WKT)
-
The file contains only attribute information - it will not be displayed on the map
-
No geometry (attribute only table)
-
Trim leading and trailing spaces from fields
-
Trim fields
-
Discard empty fields in each record
-
Number fields use comma for a decimal separator
-
Decimal separator is comma
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Semicolon
-
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
-
Regular expression used to split each line into fields
-
Layer settings
-
Sample data
-
Colon
-
Name of the field containing x values
-
Name of the field containing y values
-
@@ -22466,22 +22238,22 @@ p, li { white-space: pre-wrap; }
Form
- Formulari
+
Heading Label
-
Detail label
-
Category label
-
@@ -22490,180 +22262,180 @@ p, li { white-space: pre-wrap; }
mm
-
Map units
-
Around Point
-
Over Point
-
Line
- Línia
+
Horizontal
-
Free
-
On line
-
Above line
-
Below Line
-
Map orientation
-
Pie chart
-
Text diagram
-
Histogram
-
Height
- Alçada
+
x-height
-
Area
- Àrea
+
Diameter
-
None
-
Top
-
Right
-
Bottom
-
Left
-
Unknown diagram type.
-
The diagram type '%1' is unknown. A default type is selected for you.
-
Bar length: Scale linearly, such as the following value matches the specified size.
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Transparency: %1%
-
Diagrams: No attributes added.
-
Interpolation value
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Background color
-
Pen color
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -22671,260 +22443,260 @@ p, li { white-space: pre-wrap; }
Display diagrams
-
Diagram type
-
Priority:
-
Low
-
High
-
Appearance
-
Background color
-
Line color
-
Line width
-
Font...
-
Bar width
-
Transparency 0%
-
Start Angle
-
Only show diagrams with a size inside the specified range.
-
Hide diagrams with a size outside the specified range.
-
Scale dependent visibility
-
Minimum
- Mínim
+
Maximum
- Màxim
+
Size
-
Fixed size
-
Size units
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Attribute
-
Edit expression
-
Find maximum value
-
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Scale
-
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
Increase size of small diagrams
-
Minimum size
-
Position
-
Placement
-
Line Options
-
Distance
-
Data defined position
-
x
- x
+
y
- y
+
Automated placement settings
-
Options
- Opcions
+
Label placement
-
Bar Orientation
-
Up
- Amunt
+
Down
- Avall
+
Right
-
Left
-
Attributes
-
Available attributes
-
Add expression
-
Assigned attributes
-
Drag and drop to reorder
-
Color
-
@@ -22933,58 +22705,58 @@ Leave empty to automatically apply the maximum value.
Name
- Nom
+
Size
-
Date
-
Permissions
-
Owner
-
Group
-
Type
- Tipus
+
folder
-
file
-
link
-
@@ -22992,17 +22764,17 @@ Leave empty to automatically apply the maximum value.
%1 degrees
-
%1 radians
-
%1 gon
-
@@ -23010,7 +22782,7 @@ Leave empty to automatically apply the maximum value.
Angle
- Angle
+
@@ -23018,50 +22790,50 @@ Leave empty to automatically apply the maximum value.
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
Run layer action
-
Open form
-
Loading features...
-
Abort
-
Attribute table
-
%1 features loaded.
-
@@ -23069,17 +22841,17 @@ Parser error:
...
-
Expression
-
Column Preview
-
@@ -23087,12 +22859,12 @@ Parser error:
Form
- Formulari
+
Dummy Text
-
@@ -23105,7 +22877,7 @@ Parser error:
DXF files *.dxf *.DXF
-
@@ -23113,17 +22885,17 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
...
-
No symbology
-
Feature symbology
-
Symbol layer symbology
-
Select all
- Selecciona-ho tot
+
Unselect all
-
Export features intersecting the current map extent
-
@@ -23172,12 +22944,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -23185,52 +22957,52 @@ Parser error:
Symbol width
-
Symbol height
-
Rotation
-
Outline width
-
Fill color
-
Border color
-
Symbol name
-
Offset
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -23238,12 +23010,12 @@ Parser error:
Encoding:
-
Cancel &All
-
@@ -23251,87 +23023,87 @@ Parser error:
Search method
-
Chain (fast)
-
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
FALP (fastest)
-
Number of candidates
-
Point
- Punt
+
Line
- Línia
+
Polygon
- Polígon
+
(i.e. including colliding objects)
-
Draw text as outlines (recommended)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
Show all labels and features for all layers
-
Automated Placement Engine
-
Show candidates (for debugging)
-
@@ -23339,7 +23111,7 @@ Parser error:
Error
- Error
+
@@ -23347,35 +23119,35 @@ Parser error:
Dialog
- Diàleg
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
Always show details
-
Details >>
-
@@ -23383,7 +23155,7 @@ p, li { white-space: pre-wrap; }
Expression string builder
-
@@ -23391,122 +23163,122 @@ p, li { white-space: pre-wrap; }
(String Concatenation)
-
Joins two values together into a string
-
Usage
-
'Dia' || Diameter
-
Search
- Cerca
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Parser Error
-
Eval Error
-
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
-
Load top 10 unique values
-
Load all unique values
-
@@ -23514,37 +23286,37 @@ p, li { white-space: pre-wrap; }
Form
- Formulari
+
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Equal operator
-
=
-
Addition operator
-
+
-
Subtraction operator
-
-
-
Division operator
-
/
-
Multiplication operator
-
*
-
Power operator
-
^
-
String Concatenation
-
||
-
Open Bracket
-
(
-
Close Bracket
-
)
-
Output preview is generated <br> using the first feature from the layer.
-
Output preview:
-
Expression
-
@@ -23663,7 +23435,7 @@ p, li { white-space: pre-wrap; }
Select By Expression
-
...
-
Select
-
Add to selection
-
Remove from selection
-
Select within selection
-
@@ -23701,22 +23473,22 @@ p, li { white-space: pre-wrap; }
layer
-
map view
-
user defined
-
Extent (current: %1)
-
@@ -23724,37 +23496,37 @@ p, li { white-space: pre-wrap; }
Form
- Formulari
+
West
-
East
-
North
-
South
-
Layer extent
-
Map view extent
-
@@ -23762,7 +23534,7 @@ p, li { white-space: pre-wrap; }
Run actions
-
@@ -23770,7 +23542,7 @@ p, li { white-space: pre-wrap; }
Dialog
- Diàleg
+
@@ -23779,50 +23551,50 @@ p, li { white-space: pre-wrap; }
Not available for layer
-
Only update %1 selected features
-
Evaluation error
-
Provider error
-
Could not add the new field to the provider.
-
Error
- Error
+
An error occured while evaluating the calculation string:
%1
-
Please enter a field name
-
The expression is invalid see (more info) for details
-
@@ -23830,12 +23602,12 @@ p, li { white-space: pre-wrap; }
Field calculator
-
Only update selected features
-
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
-
Update existing field
-
@@ -23878,7 +23650,7 @@ p, li { white-space: pre-wrap; }
Expression dialog
-
@@ -23886,76 +23658,76 @@ p, li { white-space: pre-wrap; }
Label
-
Id
-
Name
- Nom
+
Type
- Tipus
+
Type name
-
Length
- Longitud
+
Precision
-
Comment
-
Edit widget
-
Alias
-
Layer
- Capa
+
Field
-
Name conflict
-
The attribute could not be inserted. The name already exists in the table.
-
Deleted attribute
-
Line edit
-
Unique values
-
Unique values editable
-
Classification
-
Value map
-
Edit range
-
Slider range
-
Dial range
-
File name
-
Enumeration
-
Immutable
-
Hidden
-
Checkbox
-
Text edit
-
Calendar
-
Value relation
-
UUID generator
-
Photo
-
Web view
-
Color
-
Editor Widget
-
Select edit form
-
UI file
-
@@ -24088,18 +23860,18 @@ p, li { white-space: pre-wrap; }
Field calculator
-
Click to toggle table editing
-
Toggle editing mode
-
Ctrl+N
-
Delete column
- Suprimeix la columna
+
Fields
-
Ctrl+X
-
Relations
-
...
-
Edit UI
-
+
-
-
-
>
-
^
-
v
-
Suppress attribute form pop-up after feature creation
-
Default
-
On
-
Off
-
Autogenerate
-
Drag and drop designer
-
Provide ui-file
-
Attribute editor layout:
-
Python Init function
-
@@ -24234,12 +24006,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
...
-
Select a file
- Selecciona un fitxer
+
@@ -24248,13 +24020,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
-
Map unit
-
@@ -24262,12 +24034,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Delete
-
Qt designer file
-
@@ -24275,12 +24047,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Form annotation
-
...
-
@@ -24289,13 +24061,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
map units
-
pixels
-
@@ -24303,12 +24075,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Recenter
-
Remove
- Suprimeix
+
@@ -24316,12 +24088,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
internal GPS
-
local gpsd
-
@@ -24334,12 +24106,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Are you sure?
-
Are you sure that you want to delete this device?
-
@@ -24347,17 +24119,17 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
GPS Device Editor
-
Devices
-
Delete
-
Update
-
Device name
-
This is the name of the device as it will appear in the lists
-
Commands
-
Track download
-
Route upload
-
Waypoint download
-
The command that is used to download routes from the device
-
Route download
-
The command that is used to upload waypoints to the device
-
Track upload
-
The command that is used to download tracks from the device
-
The command that is used to upload routes to the device
-
The command that is used to download waypoints from the device
-
The command that is used to upload tracks to the device
-
Waypoint upload
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
-
@@ -24459,47 +24231,47 @@ p, li { white-space: pre-wrap; }
/gps
-
No path to the GPS port is specified. Please enter a path then try again.
-
Connecting...
-
Connecting to GPS device...
-
Timed out!
-
Failed to connect to GPS device.
-
Connected!
-
Dis&connect
-
Connected to GPS device.
-
Disconnected...
-
&Connect
-
Disconnected from GPS device.
-
%1 m
-
%1 km/h
-
Automatic
-
Manual
-
3D
- 3D
+
2D
- 2D
+
No fix
-
Differential
-
Non-differential
-
No position
-
Valid
-
Invalid
-
Not enough vertices
-
Cannot close a line feature until it has at least two vertices.
-
Cannot close a polygon feature until it has at least three vertices.
-
Error
- Error
+
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
Cannot add feature. Unknown WKB type. Choose a different layer and try again.
-
NMEA files
-
GPS Connect
-
Add track point
-
Reset track
-
...
-
Position
-
Signal
-
Satellite
-
Options
- Opcions
+
Debug
-
&Connect
-
latitude of position fix (degrees)
-
Longitude
-
longitude of position fix (degrees)
-
antenna altitude with respect to geoid (mean sea level)
-
Altitude
-
Latitude
-
Time of fix
-
date/time of position fix (UTC)
-
speed over ground
-
Speed
-
track direction (degrees)
-
Direction
-
Horizontal Dilution of Precision
-
HDOP
-
Vertical Dilution of Precision
-
VDOP
-
Position Dilution of Precision
-
PDOP
-
GPS receiver configuration 2D/3D mode: Automatic or Manual
-
Mode
-
position fix dimensions: 2D, 3D or No fix
-
Dimensions
- Dimensions
+
quality of the position fix: Differential, Non-differential or No position
-
Quality
-
position fix status: Valid or Invalid
-
Status
-
number of satellites used in the position fix
-
Satellites
-
H accurancy
-
V accurancy
-
Connection
-
Autodetect
-
Serial device
-
Refresh serial device list
-
Port
-
Host
-
Device
-
00000;
-
gpsd
-
Internal
-
Digitizing
-
Track
-
Track width in pixels
-
width
-
Color
-
save layer after every feature added
-
Automatically save added feature
-
save GPS data (NMEA sentences) to a file
-
Log File
-
browse for log file
-
Map centering
-
when leaving
-
% of map extent
-
never
-
always
-
Cursor
-
Small
-
Large
-
@@ -25043,7 +24815,7 @@ gray = no data
&GPS Tools
-
&GPS
-
GPS eXchange file
-
Could not create file
-
Unable to create a GPX file with the given name. Try again with another name or in another directory.
-
GPX Loader
-
Unable to read the selected file.
Please reselect a valid file.
-
Could not start process
-
Could not start GPSBabel!
-
Importing data...
-
Could not import data from %1!
-
Error importing data
-
Could not convert data from %1!
-
Error converting data
-
Not supported
-
This device does not support downloading of %1.
-
Downloading data...
-
Could not download data from GPS!
-
Error downloading data
-
This device does not support uploading of %1.
-
Uploading data...
-
Error while uploading data to GPS!
-
Error uploading data
-
@@ -25204,26 +24976,26 @@ Please reselect a valid file.
Waypoints
-
Routes
-
Tracks
-
Choose a file name to save under
-
GPS eXchange format
-
Select GPX file
-
Select file and format to import
-
Waypoints from a route
-
Waypoints from a track
-
Route from waypoints
-
Track from waypoints
-
GPS eXchange format (*.gpx)
-
@@ -25275,76 +25047,76 @@ Please reselect a valid file.
GPS Tools
-
Load GPX file
-
File
-
Browse...
-
Feature types
-
Waypoints
-
Routes
-
Tracks
-
Import other file
-
File to import
-
Feature type
-
Layer name
-
GPX output file
-
(Note: Selecting correct file type in browser dialog important!)
-
Download from GPS
-
GPS device
-
Edit devices...
-
Port
-
Refresh
-
Output file
- Fitxer de sortida
+
Upload to GPS
-
Data layer
-
Edit devices
-
GPX Conversions
-
GPX input file
-
Conversion
- Conversió
+
@@ -25426,17 +25198,17 @@ Please reselect a valid file.
Bad URI - you need to specify the feature type.
-
GPS eXchange file
-
Digitized in QGIS
-
@@ -25444,52 +25216,52 @@ Please reselect a valid file.
Dataset Description
-
Band %1
-
X: %1 Y: %2 Bands: %3
-
Dimensions
- Dimensions
+
Origin
-
Pixel Size
-
Band
-
Format not supported
-
Cannot read data
-
Cannot get GDAL raster band: %1
-
@@ -25497,17 +25269,17 @@ Please reselect a valid file.
Define this layer's coordinate reference system:
-
This layer appears to have no projection specification.
-
By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.
-
@@ -25515,7 +25287,7 @@ Please reselect a valid file.
Coordinate Reference System Selector
-
@@ -25523,17 +25295,17 @@ Please reselect a valid file.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -25541,122 +25313,122 @@ Please reselect a valid file.
A5 (148x210 mm)
-
A4 (210x297 mm)
-
A3 (297x420 mm)
-
A2 (420x594 mm)
-
A1 (594x841 mm)
-
A0 (841x1189 mm)
-
B5 (176 x 250 mm)
-
B4 (250 x 353 mm)
-
B3 (353 x 500 mm)
-
B2 (500 x 707 mm)
-
B1 (707 x 1000 mm)
-
B0 (1000 x 1414 mm)
-
Legal (8.5x14 inches)
-
ANSI A (Letter; 8.5x11 inches)
-
ANSI B (Tabloid; 11x17 inches)
-
ANSI C (17x22 inches)
-
ANSI D (22x34 inches)
-
ANSI E (34x44 inches)
-
Arch A (9x12 inches)
-
Arch B (12x18 inches)
-
Arch C (18x24 inches)
-
Arch D (24x36 inches)
-
Arch E (36x48 inches)
-
Arch E1 (30x42 inches)
-
@@ -25664,73 +25436,73 @@ Please reselect a valid file.
Configure Georeferencer
-
Point tip
-
Show IDs
-
Show coords
-
Residual units
-
Pixels
-
Use map units if possible
-
PDF report
-
Left margin
-
mm
-
Right margin
-
Show Georeferencer window docked
-
PDF map
-
Paper size
-
@@ -25738,16 +25510,16 @@ Please reselect a valid file.
Description georeferencer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
@@ -25757,7 +25529,7 @@ p, li { white-space: pre-wrap; }
&Georeferencer
-
@@ -25765,12 +25537,12 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
All other files (*)
-
%1 is not a supported raster data source
-
Unsupported Data Source
-
Raster loaded: %1
-
Georeferencer - %1
-
Transform:
-
Info
- Informació
+
GDAL scripting is not supported for %1 transformation
-
Load GCP points
-
GCP file
-
No GCP points to save
-
Save GCP points
-
Please load raster to be georeferenced
-
Panels
-
Toolbars
-
Current transform parametrisation
-
Coordinate:
-
Current map coordinate
-
None
-
Coordinate of image(column/line)
-
Unable to open GCP points file %1
-
Save GCPs
-
Save GCP points?
-
Failed to get linear transform parameters
-
World file exists
-
<p>The selected file already seems to have a world file! Do you want to replace it with the new world file?</p>
-
Failed to compute GCP transform: Transform is not solvable
-
Error
- Error
+
Could not write to %1
-
map units
-
pixels
-
Transformation parameters
-
Translation x
-
Translation y
-
Scale x
-
Scale y
-
Rotation [degrees]
-
Mean error [%1]
-
Residuals
-
yes
-
no
-
Translation (%1, %2)
-
Scale (%1, %2)
-
Rotation: %1
-
Mean error: %1
-
Copy in clipboard
-
%1
-
GDAL script
-
Please set transformation type
-
Please set output raster name
-
%1 requires at least %2 GCPs. Please define more
-
Linear
-
Helmert
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin plate spline (TPS)
-
Projective
-
Not set
-
@@ -26098,40 +25870,40 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
File
-
View
- Visualització
+
Edit
- Edita
+
Settings
-
GCP table
-
toolBar
-
Ctrl+O
-
Zoom In
-
Ctrl++
-
Zoom Out
-
Ctrl+-
-
Zoom to Layer
-
Ctrl+Shift+F
-
Pan
-
Transformation settings
-
Ctrl+A
-
Delete point
-
Ctrl+D
-
Quit
-
Start georeferencing
-
Ctrl+G
-
Generate GDAL script
-
Ctrl+C
-
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
Save GCP points as...
-
Ctrl+S
-
Load GCP points
-
Ctrl+L
-
Configure Georeferencer
-
Ctrl+P
-
Raster properties
-
Move GCP point
-
Zoom Next
-
Zoom Last
-
Local histogram stretch
-
Full histogram stretch
-
@@ -26320,18 +26092,18 @@ p, li { white-space: pre-wrap; }
GDAL files
-
DEM files
-
All files
-
Invalid Path: The file is either unreadable or does not exist
-
Invalid URL:
-
Do you want to add the datasource anyway?
-
Model files
-
@@ -26369,94 +26141,94 @@ p, li { white-space: pre-wrap; }
Globe Settings
-
Elevation
-
Type
- Tipus
+
Raster
- Ràster
+
TMS
-
URL/File
-
...
-
Up
- Amunt
+
Map
-
Base Layer
-
URL
-
TextLabel
-
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Down
- Avall
+
Remove
- Suprimeix
+
Cache
-
Path
-
Video
-
Anti Aliasing
-
Samples
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Model
-
Point Layer
-
3D Model
-
Stereo
-
Stereo Mode
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -26580,32 +26352,32 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Abort
-
Error: %1 on line %2, column %3
-
WFS
-
GML Getfeature network request failed with error: %1
-
Network
-
@@ -26613,7 +26385,7 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
@@ -26621,90 +26393,90 @@ p, li { white-space: pre-wrap; }
Millimeter
-
Map unit
-
Color (start)
-
Color (end)
-
Angle
- Angle
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
QgsGraduatedSymbolRendererV2Model
- Symbol
-
- Value
- Valor
+
- Label
-
@@ -26712,125 +26484,125 @@ p, li { white-space: pre-wrap; }
Column
- Columna
+
Symbol
-
Change...
-
Classes
-
Color ramp
-
Mode
-
Equal Interval
-
Quantile (Equal Count)
-
Natural Breaks (Jenks)
-
Standard Deviation
-
Pretty Breaks
-
Invert
-
Classify
-
Add class
-
Delete
-
Delete all
-
Advanced
-
- Symbol levels...
-
- Error
- Error
+
- There are no available color ramps. You can add them in Style Manager.
-
- The selected color ramp is not available.
-
- Warning
- Avís
+
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
-
- Renderer creation has failed.
-
@@ -26838,32 +26610,32 @@ Press cancel to abort breaks calculation or OK to continue.
Column
- Columna
+
Value
- Valor
+
Type
- Tipus
+
Layer
- Capa
+
Warning
- Avís
+
ERROR
-
GRASS Attributes
-
Tab 1
-
result
-
Update database record
-
Update
-
Add new category using settings in GRASS Edit toolbox
-
Delete selected category
-
Delete
-
@@ -26924,7 +26696,7 @@ Press cancel to abort breaks calculation or OK to continue.
Tools
-
Copy selected map
-
Rename selected map
-
Delete selected map
-
Set current region to selected map
-
Refresh
-
Warning
- Avís
+
Cannot copy map %1@%2
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot rename map %1
-
Information
- Informació
+
Question
-
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
-
+
Cannot delete map %1
-
Cannot write new region
-
@@ -27044,12 +26812,12 @@ Press cancel to abort breaks calculation or OK to continue.
Warning
- Avís
+
You are not owner of the mapset, cannot open the vector for editing.
-
Edit tools
-
Move vertex
-
Delete vertex
-
Move element
-
Split line
-
Delete element
-
Edit attributes
-
Background
-
Highlight
-
Dynamic
-
Point
- Punt
+
Line
- Línia
+
Boundary (no area)
-
Boundary (1 area)
-
Boundary (2 areas)
-
Centroid (in area)
-
Centroid (outside area)
-
Centroid (duplicate in area)
-
Node (1 line)
-
Node (2 lines)
-
Next not used
-
Manual entry
-
No category
-
Info
- Informació
+
The table was created
-
Tool not yet implemented.
-
Cannot check orphan record: %1
-
Orphan record was left in attribute table. <br>Delete the record?
-
Cannot delete orphan record:
-
Cannot describe table for field %1
-
Left: %1
-
-- Middle: %1
-
-- Right: %1
-
@@ -27260,7 +27028,7 @@ Press cancel to abort breaks calculation or OK to continue.
Select line segment
-
Release
-
@@ -27278,7 +27046,7 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
@@ -27286,85 +27054,85 @@ Press cancel to abort breaks calculation or OK to continue.
GRASS Edit
-
Category
-
Mode
-
Layer
- Capa
+
Settings
-
Snapping in screen pixels
-
Symbology
-
Line width
-
Marker size
-
Disp
-
Color
-
Type
- Tipus
+
Index
-
Table
- Taula
+
Column
- Columna
+
Length
- Longitud
+
Create / Alter Table
-
@@ -27384,17 +27152,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
Delete selected / select next
-
Release selected
-
@@ -27405,17 +27173,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select vertex
-
Delete vertex
-
Release vertex
-
@@ -27426,7 +27194,7 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
Release selected
-
@@ -27446,7 +27214,7 @@ Press cancel to abort breaks calculation or OK to continue.
Select vertex
-
Close line
-
@@ -27496,23 +27264,23 @@ Press cancel to abort breaks calculation or OK to continue.
Select position on line
-
Split the line
-
Release the line
-
Select point on line
-
@@ -27530,22 +27298,22 @@ Press cancel to abort breaks calculation or OK to continue.
<font color='red'>Enter a name!</font>
-
<font color='red'>This is name of the source!</font>
-
<font color='red'>Exists!</font>
-
Overwrite
-
@@ -27553,7 +27321,7 @@ Press cancel to abort breaks calculation or OK to continue.
Mapcalc tools
-
Select item
-
Delete selected item
-
Addition
-
Subtraction
-
Multiplication
-
Division
-
Modulus
-
Exponentiation
-
Equal
-
Not equal
-
Greater than
-
Greater than or equal
-
Less than
-
Less than or equal
-
And
-
Or
-
Absolute value of x
-
Inverse tangent of x (result is in degrees)
-
Inverse tangent of y/x (result is in degrees)
-
Current column of moving window (starts with 1)
-
Cosine of x (x is in degrees)
-
Convert x to double-precision floating point
-
Current east-west resolution
-
Exponential function of x
-
x to the power y
-
Convert x to single-precision floating point
-
Decision: 1 if x not zero, 0 otherwise
-
Decision: a if x not zero, 0 otherwise
-
Decision: a if x not zero, b otherwise
-
Decision: a if x > 0, b if x is zero, c if x < 0
-
Convert x to integer [ truncates ]
-
Check if x = NULL
-
Natural log of x
-
Log of x base b
-
Largest value
-
Median value
-
Smallest value
-
Mode value
-
1 if x is zero, 0 otherwise
-
Current north-south resolution
-
NULL value
-
Random value between a and b
-
Round x to nearest integer
-
Current row of moving window (Starts with 1)
-
Sine of x (x is in degrees)
sin(x)
-
Square root of x
sqrt(x)
-
Tangent of x (x is in degrees)
tan(x)
-
Current x-coordinate of moving window
-
Current y-coordinate of moving window
-
Output
-
Warning
- Avís
+
Cannot get current region
-
Cannot check region of map %1
-
Cannot get region of map %1
-
No GRASS raster maps currently in QGIS
-
Cannot create 'mapcalc' directory in current mapset.
-
New mapcalc
-
Enter new mapcalc name:
-
Enter vector name
-
Save mapcalc
-
File name empty
-
Cannot open mapcalc file
-
The mapcalc schema (%1) not found.
-
Cannot open mapcalc schema (%1)
-
Cannot read mapcalc schema (%1):
-
%1
at line %2 column %3
-
@@ -27953,12 +27721,12 @@ at line %2 column %3
MainWindow
-
Output
-
@@ -27966,7 +27734,7 @@ at line %2 column %3
Module: %1
-
Warning
- Avís
+
The module file (%1) not found.
-
Cannot read module file (%1)
-
%1
at line %2 column %3
-
Module %1 not found
-
Cannot find man page %1
-
Please ensure you have the GRASS documentation installed.
-
Not available, description not found (%1)
-
Not available, cannot open description (%1)
-
Not available, incorrect description (%1)
-
Run
-
Cannot get input region
-
Input %1 outside current region!
-
Use Input Region
-
Output %1 exists! Overwrite?
-
Cannot find module %1
-
Cannot start module: %1
-
Stop
-
<B>Successfully finished</B>
-
<B>Finished with error</B>
-
<B>Module crashed or killed</B>
-
@@ -28100,37 +27868,37 @@ at line %2 column %3
GRASS Module
-
Options
- Opcions
+
Output
-
Manual
-
TextLabel
-
Run
-
View output
-
Attribute field
-
Warning
- Avís
+
'layer' attribute in field tag with key= %1 is missing.
-
@@ -28161,17 +27929,17 @@ at line %2 column %3
File
-
%1: missing value
-
%1: directory does not exist
-
@@ -28179,44 +27947,44 @@ at line %2 column %3
OGR/PostGIS/GDAL Input
-
Warning
- Avís
+
Cannot find layeroption %1
-
Cannot find whereoption %1
-
Password
-
Select a layer
-
PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
-
%1: no input
-
@@ -28224,7 +27992,7 @@ at line %2 column %3
Input
- Entrada
+
Warning
- Avís
+
Cannot find typeoption %1
-
Cannot find values for typeoption %1
-
Cannot find layeroption %1
-
GRASS element %1 not supported
-
Use region of this map
-
Select a layer
-
%1 (band %2)
-
Cannot get provider
-
%1: no input
-
@@ -28288,38 +28056,38 @@ at line %2 column %3
Browse
- Navega
+
Output file
- Fitxer de sortida
+
GeoTIFF
-
Warning
- Avís
+
Cannot parse version_min %1
-
Cannot parse version_max %1
-
%1: missing value
-
@@ -28327,7 +28095,7 @@ at line %2 column %3
Selected categories
-
@@ -28351,117 +28119,117 @@ at line %2 column %3
Warning
- Avís
+
Cannot find module %1
-
Cannot start module %1
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot read module description (%1):
-
%1
at line %2 column %3
-
Region
-
Input layers
-
Current map canvas
-
Cannot find key %1
-
<< Hide advanced options
-
Show advanced options >>
-
Item with key %1 not found
-
Item with id %1 not found
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
-
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
Cannot set region of map %1
-
@@ -28469,60 +28237,60 @@ at line %2 column %3
Database
-
Location 1
-
System mapset
-
User's mapset
-
Location 2
-
Enter path to GRASS database
-
The directory doesn't exist!
-
No writable locations, the database is not writable!
-
Enter location name!
-
The location exists!
-
Selected projection is not supported by GRASS!
-
Warning
- Avís
+
Cannot create projection.
-
Cannot reproject previously set region, default region set.
-
North must be greater than south
-
East must be greater than west
-
Regions file (%1) not found.
-
Cannot open locations file (%1)
-
Cannot read locations file (%1):
-
%1
at line %2 column %3
-
Cannot create QgsCoordinateReferenceSystem
-
Cannot reproject selected region.
-
Cannot reproject region
-
Enter mapset name.
-
The mapset already exists
-
Database:
-
Location:
-
Mapset:
-
Create location
-
Create mapset
-
Cannot create new mapset directory
-
Cannot open DEFAULT_WIND
-
Cannot open WIND
-
New mapset
-
New mapset successfully created, but cannot be opened: %1
-
New mapset successfully created and set as current working mapset.
-
@@ -28678,52 +28446,52 @@ at line %2 column %3
New Mapset
-
GRASS Database
-
Tree
-
Comment
-
Example directory tree:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
-
Database Error
- S'ha produït un error de la base de dades
+
Database:
-
Browse...
-
GRASS Location
-
Location
-
Select location
-
Location Error
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
-
Projection
-
Projection Error
-
Coordinate system
-
Not defined
-
Default GRASS Region
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
-
Set current QGIS extent
-
Set
-
Region Error
-
S
-
W
-
E
-
N
-
Mapset
-
New mapset:
-
Mapset Error
-
<p align="center">Existing mapsets</p>
-
Owner
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
-
Create New Mapset
-
Location:
-
Mapset:
-
@@ -28890,22 +28658,22 @@ p, li { white-space: pre-wrap; }
GrassVector
-
0.1
- 0.1
+
GRASS layer
-
Plugins
- Connectors
Open GRASS tools
-
Display Current Grass Region
-
Edit Current Grass Region
-
Edit Grass Vector layer
-
Open Mapset
-
New Mapset
-
Close Mapset
-
Open GRASS Tools
-
Displays the current GRASS region as a rectangle on the map canvas
-
Edit the current GRASS region
-
Edit the currently selected GRASS vector layer.
-
Create New Grass Vector
-
&GRASS
-
GRASS
-
Warning
- Avís
+
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
Cannot open GRASS vector:
%1
-
GRASS Edit is already running.
-
New vector created but cannot be opened by data provider.
-
Cannot start editing.
-
Cannot open vector for update.
- No es pot obrir el vector per actualitzar.
+
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot open the mapset. %1
-
Cannot close mapset. %1
-
Cannot close current mapset. %1
-
Cannot open GRASS mapset. %1
-
@@ -29119,7 +28887,7 @@ p, li { white-space: pre-wrap; }
GRASS vector map %1 does not have topology. Build topology?
-
@@ -29127,22 +28895,22 @@ p, li { white-space: pre-wrap; }
cellhd file %1 does not exist
-
Groups not yet supported
-
Format not supported
-
Cannot read data
-
@@ -29152,22 +28920,22 @@ p, li { white-space: pre-wrap; }
Warning
- Avís
+
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot write region
-
@@ -29175,53 +28943,53 @@ p, li { white-space: pre-wrap; }
GRASS Region Settings
-
Extent
-
North
-
West
-
East
-
South
-
Select the extent by dragging on canvas
or change the following values
-
Resolution
-
Cell width
-
Cell height
-
Border
-
Color
-
Width
- Amplada
+
@@ -29254,57 +29022,57 @@ or change the following values
Select GRASS Vector Layer
-
Select GRASS Raster Layer
-
Select GRASS mapcalc schema
-
Select GRASS Mapset
-
Choose existing GISDBASE
-
Wrong GISDBASE, no locations available.
-
Wrong GISDBASE
-
Select a map.
-
No map
-
No layer
-
No layers available in this map
-
@@ -29317,37 +29085,37 @@ or change the following values
Gisdbase
-
Location
-
Mapset
-
Map name
-
Select or type map name (wildcards '*' and '?' accepted for rasters)
-
Layer
- Capa
+
Browse...
-
@@ -29355,24 +29123,24 @@ or change the following values
Ctrl+Shift+V
-
Ctrl+Shift+C
-
Warning
- Avís
+
Cannot rename the lock file %1
-
@@ -29380,48 +29148,48 @@ or change the following values
GRASS Tools
-
GRASS Tools: %1/%2
-
GRASS Direct Tools
-
Modules Tree
-
Modules List
-
Browser
-
Direct Modules Tree
-
Direct Modules List
-
Cannot start command shell (%1)
-
Warning
- Avís
+
GRASS Shell is not compiled.
-
The config file (%1) not found.
-
Cannot open config file (%1).
-
Cannot read config file (%1):
-
%1
at line %2 column %3
-
@@ -29464,39 +29232,39 @@ at line %2 column %3
Grass Tools
-
Modules Tree
-
1
- 1
+
Modules List
-
Filter
-
Direct Modules Tree
-
Direct Modules List
-
@@ -29509,17 +29277,17 @@ at line %2 column %3
Start editing failed
-
Provider cannot be opened for editing
-
Stop editing
-
Error
- Error
+
Problems during roll back
-
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
-
Show more
-
@@ -29565,69 +29333,65 @@ at line %2 column %3
Browse
- Navega
+
Layer name
-
Type
- Tipus
+
Provider
-
Datasource
-
none
-
Select file to replace '%1'
-
Please select exactly one file.
-
Select new directory of selected files
-
All files (*)
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -29635,7 +29399,7 @@ at line %2 column %3
Handle bad layers
-
@@ -29643,12 +29407,12 @@ at line %2 column %3
Handle bad layers
-
%1 of %2 bad layers were not fixable.
-
@@ -29669,7 +29433,7 @@ at line %2 column %3
about:blank
-
@@ -29677,17 +29441,17 @@ at line %2 column %3
HTML annotation
-
Delete
-
html
-
@@ -29695,73 +29459,69 @@ at line %2 column %3
WMS Server responded unexpectedly with HTTP Status Code %1 (%2)
-
Received %1 of %2 bytes
-
Received %1 bytes (total unknown)
-
HTTP response completed, however there was an error: %1
-
HTTP transaction completed, however there was an error: %1
-
Not connected
-
Looking up '%1'
-
Connecting to '%1'
-
Sending request '%1'
-
Receiving reply
-
Response is complete
-
Closing down connection
-
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
-
+
@@ -29769,12 +29529,12 @@ This may be a problem in your network connection or at the WMS server.
Dialog
- Diàleg
+
Distance coefficient P
-
@@ -29782,32 +29542,32 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Layer
- Capa
+
FID
-
Attribute
-
Value
- Valor
+
Expand tree.
-
...
-
Clear Results
-
Select identify mode
-
Mode
-
Select view mode for raster layers
-
View
- Visualització
+
Auto open form
-
Collapse tree.
-
New results will be expanded by default.
-
Copy selected feature to clipboard.
-
Print selected HTML response.
-
@@ -29881,48 +29641,48 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Feature
-
Value
- Valor
+
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
(Derived)
-
(Actions)
-
Edit feature form
-
View feature form
-
Table
- Taula
+
Tree
-
Graph
-
feature id
-
Format
-
No attributes.
-
Zoom to feature
-
Copy feature
-
Toggle feature selection
-
Copy attribute value
-
Copy feature attributes
-
Copy GetFeatureInfo request URL
-
Clear results
-
Clear highlights
-
Highlight all
-
Highlight layer
-
Activate layer
-
Layer properties...
-
Expand all
-
Collapse all
-
Attributes changed
-
Cannot print
-
Cannot print this item
-
@@ -30061,7 +29821,7 @@ This may be a problem in your network connection or at the WMS server.
Print
-
@@ -30069,7 +29829,7 @@ This may be a problem in your network connection or at the WMS server.
Loading...
-
@@ -30077,7 +29837,7 @@ This may be a problem in your network connection or at the WMS server.
Progress indication
-
@@ -30086,55 +29846,55 @@ This may be a problem in your network connection or at the WMS server.
Triangular interpolation (TIN)
-
Inverse Distance Weighting (IDW)
-
No input data for interpolation
-
Please add one or more input layers
-
Output file name invalid
-
Please enter a valid output file name
-
Break lines
-
Structure lines
-
Points
-
Save interpolated raster as...
-
@@ -30142,27 +29902,27 @@ This may be a problem in your network connection or at the WMS server.
Interpolation plugin
-
Input
- Entrada
+
Vector layers
-
Interpolation attribute
-
Use z-Coordinate for interpolation
-
Remove
- Suprimeix
+
Vector layer
-
Attribute
-
Type
- Tipus
+
Output
-
Interpolation method
-
...
-
Number of columns
-
Number of rows
-
Cellsize X
-
Cellsize Y
-
X min
- X mín.
+
X max
-
Y min
- Y mín.
+
Y max
- Y màx.
+
Set to current extent
-
Output file
-
&Interpolation
-
@@ -30277,7 +30037,7 @@ This may be a problem in your network connection or at the WMS server.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -30285,17 +30045,17 @@ This may be a problem in your network connection or at the WMS server.
Form
- Formulari
+
Sub renderer:
-
Merge polygons before rendering (slow)
-
@@ -30303,17 +30063,17 @@ This may be a problem in your network connection or at the WMS server.
Enter class bounds
-
Lower value
-
Upper value
-
@@ -30321,7 +30081,7 @@ This may be a problem in your network connection or at the WMS server.
Auto
-
@@ -30329,284 +30089,284 @@ This may be a problem in your network connection or at the WMS server.
Form1
-
Label Properties
-
Placement
-
Below Right
-
Right
-
Below
-
Over
-
Above
-
Left
-
Below Left
-
Above Right
-
Above Left
-
Use scale dependent rendering
-
Maximum
- Màxim
+
Minimum
- Mínim
+
Buffer labels
-
Buffer size
-
In points
-
In map units
-
Color
-
%
- %
+
Transparency
-
Offset
-
X offset
-
Y offset
-
Basic label options
-
Field containing label
-
Default label
-
Font size
-
Angle (deg)
-
°
-
Font
-
Multiline labels?
-
Label only selected features
-
Advanced
-
Data defined placement
-
Data defined properties
-
&Font family
-
&Bold
-
&Italic
-
&Underline
-
&Size
-
Size units
-
&Color
-
Strikeout
-
Data defined buffer
-
Transparency:
-
Size:
-
Data defined position
-
X Coordinate
-
Y Coordinate
-
X Offset (pts)
-
Y Offset (pts)
-
Preview:
-
QGIS Rocks!
-
@@ -30614,17 +30374,17 @@ This may be a problem in your network connection or at the WMS server.
Expression result
-
Font color
-
Buffer color
-
@@ -30632,135 +30392,135 @@ This may be a problem in your network connection or at the WMS server.
Label properties
-
Text
-
Font
-
Available typeface styles
-
Size
-
Style
-
Underlined text
-
U
-
Strikeout text
-
S
-
Bold text
(data defined only, overrides Style)
-
B
-
Italic text
(data defined only, overrides Style)
-
I
-
Display
-
Scale-based
-
Min
-
Max
-
Show label
-
Ignores priority and permits collisions/overlaps
-
Always show (exceptions above)
-
Buffer
-
Position
-
Label distance
-
X Coordinate
-
Y Coordinate
-
Rotation
-
@@ -30783,7 +30543,7 @@ This may be a problem in your network connection or at the WMS server.
points
-
map units
-
mm
-
% of length
-
%1 not found. Default substituted.
-
Chosen font
-
string
-
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
-
int [0-2000]
-
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
-
int [1-10000]
-
Text/Buffer sample
-
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
No change
-
All uppercase
-
All lowercase
-
Capitalize first letter
-
Size%1
-
X
-
File not found
-
@@ -30950,12 +30710,12 @@ This may be a problem in your network connection or at the WMS server.
Layer labeling settings
-
- Label this layer with
-
...
-
Lorem Ipsum
-
Sample text
-
Reset sample text
-
Size for sample text in map units
-
Sample background color
-
Line direction symbol
-
Formatted numbers
-
Decimal places
-
Show plus sign
-
Multiple lines
-
- Automated placement settings (apply to all layers)
-
Text/Buffer Sample
-
Text
-
Formatting
-
Shadow
-
Rendering
-
letter
-
Spacing
-
Blend mode
-
word
-
Underlined text
-
Bold text
(data defined only, overrides Style)
-
B
-
Italic text
(data defined only, overrides Style)
-
I
-
Font is missing.
-
Text formatting
-
Wrap on character
-
Line height
-
Line height spacing for multi-line text
-
line
-
Alignment
Alineació
Paragraph style alignment of multi-line text
-
Left
-
Center
-
Right
-
Force point inside polygon
-
Repeat
-
- Discourage labels from covering features
-
Text style
-
Available typeface styles
-
U
-
Strikeout text
-
S
-
Style
-
Transparency
-
%
-
Capitalization style of text
-
Space in pixels or map units, relative to size unit choice
-
Type case
-
Font
-
Color
-
Size
-
Buffer
-
- Labels will not show if larger than this on screen
-
-
- px
-
-
- Data defined
-
-
- X
- X
-
-
- Y
- Y
-
-
- Coordinate
-
-
- Preserve data rotation values
-
-
- horizontal
-
-
- vertical
-
-
- Label options
-
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
-
- Maximum
-
-
- Pixel size-based visibility (labels in map units)
-
Labels will not show if smaller than this on screen
- px
+
- Data defined
+
+
+ X
+
+
+ Y
+
+
+ Coordinate
+
+
+ Preserve data rotation values
+
+
+ horizontal
+
+
+ vertical
+
+
+ Label options
+
+
+ Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
+
+
+ Maximum
+
+
+ Pixel size-based visibility (labels in map units)
+
+
+ Labels will not show if smaller than this on screen
+
+
+ Minimum
-
<
-
- Scale-based visibility
-
>
-
Placement
-
left/right
-
above
-
below
-
Reverse direction
-
- Priority
-
- Low
-
- High
-
Around point
-
Offset from point
-
Parallel
-
Curved
-
Text buffer
-
Draw text buffer
-
Color buffer's fill
-
Draw background
-
Size X
-
Size type
-
Size Y
-
Fill color
-
Border color
-
Draw drop shadow
-
Blur radius
-
Blur only alpha pixels
-
Label's rotation is ignored
-
Use global shadow
-
˚
-
Lowest label component
-
Draw under
-
Horizontal
-
Offset from centroid
-
Around centroid
-
Horizontal (slow)
-
Free (slow)
-
Using perimeter
-
visible polygon
-
whole polygon
-
Rotation
-
Above line
-
On line
-
Below line
-
Line orientation dependent position
-
Centroid
-
abc
-
Quadrant
-
Distance
-
- outside
-
- inside
-
- Maximum angle between curved characters
-
Pen join style
-
Drop shadow
-
Offset
-
Scale
-
Background
-
Load symbol parameters
-
Fixed
-
Offset X,Y
-
Rectangle
-
Square
-
Ellipse
-
Circle
-
SVG
-
Shape
-
Sync with label
-
Offset of label
-
Radius X,Y
-
Border width
-
symbol units
-
- Merge connected lines to avoid duplicate labels
-
- Label every part of multi-part features
-
- Feature options
-
- Suppress labeling of features smaller than
-
- mm
-
- Show all labels for this layer (including colliding labels)
-
- Show upside-down labels
-
- never
-
- when rotation defined
-
- always
-
- Limit number of features to be labeled to
-
- Number of features sent to labeling engine, though not all may be labeled
-
Position
-
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
-
- Show label
-
@@ -31891,21 +31651,21 @@ This may be a problem in your network connection or at the WMS server.
Outline: %1
-
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -31913,7 +31673,7 @@ not displayed
&Add Group
-
&Show in overview
-
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
QgsLegendModel
- Group
-
- No Legend Available
-
@@ -31975,33 +31735,33 @@ not displayed
Millimeter
-
Map unit
-
Angle
- Angle
+
Distance
-
Line width
-
Color
-
@@ -32009,12 +31769,12 @@ not displayed
Styles related to the layer
-
Other styles on the database
-
Load Style
-
@@ -32033,37 +31793,37 @@ not displayed
Select all
- Selecciona-ho tot
+
Clear selection
-
Select connections to import
-
Import
-
Export
-
Export/import error
-
You should select at least one connection from list.
-
XML files (*.xml *.XML)
-
Saving connections
-
Cannot write file %1:
%2.
-
Loading connections
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an WMS connections exchange file.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an PostGIS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Manage connections
-
Select connections to export
-
QgsMapCanvas
- canvas
-
- Rendering
-
- Canvas refresh: %1 ms
-
@@ -32210,7 +31970,7 @@ not displayed
From map canvas
-
@@ -32218,27 +31978,27 @@ not displayed
Enter map coordinates
-
Enter X and Y coordinates (DMS (dd mm ss.ss), DD (dd.dd) or projected coordinates (mmmm.mm)) which correspond with the selected point on the image. Alternatively, click the button with icon of a pencil and then click a corresponding point on map canvas of QGIS to fill in coordinates of that point.
-
X / East:
-
Y / North:
-
Snap to background layers
-
@@ -32247,55 +32007,55 @@ not displayed
Specify CRS for layer %1
-
%1 at line %2 column %3
-
Error: qgis element could not be found in %1
-
Loading style file %1 failed because:
%2
-
Could not save symbology because:
%1
-
The directory containing your dataset needs to be writable!
-
Style not found in database
-
Created default style file as %1
-
ERROR: Failed to created default style file as %1. Check file permissions and retry.
-
The style table could not be created.
-
The style %1 was updated in the database.
-
The style %1 could not be updated in the database.
-
The style %1 could not be inserted into database.
-
ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
Unable to open file %1
-
@@ -32344,13 +32104,13 @@ not displayed
Transform error caught: %1
-
CRS
-
@@ -32368,41 +32128,41 @@ not displayed
The data provider for this layer does not support the addition of features.
-
Wrong editing tool
-
Cannot apply the 'capture point' tool on this vector layer
-
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Cannot apply the 'capture line' tool on this vector layer
-
Cannot apply the 'capture polygon' tool on this vector layer
-
Error
- Error
+
Cannot add feature. Unknown WKB type
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
@@ -32446,33 +32206,33 @@ not displayed
No feature selected. Please select a feature with the selection tool or in the attribute table
-
Several features are selected. Please select only one feature to which an part should be added.
-
Part added
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected feature is not multi part.
-
New polygon ring not disjoint with existing polygons.
-
Several features are selected. Please select only one feature to which an island should be added.
-
Selected geometry could not be found
-
@@ -32500,12 +32260,12 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
A problem with geometry type occured
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Validation started.
-
Validation finished.
-
@@ -32566,7 +32326,7 @@ not displayed
Changed properties for label
-
@@ -32574,12 +32334,12 @@ not displayed
Part of multipart feature deleted
-
Couldn't remove the selected part.
-
@@ -32587,18 +32347,18 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
Ring deleted
-
@@ -32606,12 +32366,12 @@ not displayed
No active vector layer
-
Layer not editable
-
@@ -32619,27 +32379,27 @@ not displayed
No active vector layer
-
To run an action, you must choose a vector layer by clicking on its name in the legend
-
No actions available
-
The active vector layer has no defined actions
-
No features at this position found.
-
@@ -32647,22 +32407,22 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added and filled
-
A problem with geometry type occured
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
- S'ha produït un error, no s'ha pogut afegir l'anell
+
@@ -32700,91 +32460,91 @@ not displayed
All (%1)
-
No active layer. To identify features, you must choose an active layer.
-
Identifying on %1...
-
Identifying done.
-
(clicked coordinate)
-
feature id
-
new feature
-
Length
- Longitud
+
firstX
attributes get sorted; translation for lastX should be lexically larger than this one
-
firstY
-
lastX
attributes get sorted; translation for firstX should be lexically smaller than this one
-
lastY
-
Area
- Àrea
+
Perimeter
-
no data
-
Error
- Error
+
Identify error
-
@@ -32792,7 +32552,7 @@ not displayed
No features at this position found.
-
@@ -32800,7 +32560,7 @@ not displayed
Feature moved
-
@@ -32808,7 +32568,7 @@ not displayed
Moved label
-
@@ -32816,12 +32576,12 @@ not displayed
could not snap to a segment on the current layer.
-
Inserted vertex
-
@@ -32829,22 +32589,22 @@ not displayed
Offset curve
-
Offset:
-
Geometry error
-
Creating offset geometry failed
-
@@ -32852,12 +32612,12 @@ not displayed
Pinned label
-
Unpinned label
-
@@ -32865,17 +32625,17 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Reshape
-
@@ -32883,7 +32643,7 @@ not displayed
Features Rotated
-
@@ -32891,7 +32651,7 @@ not displayed
Rotated label
-
@@ -32899,27 +32659,27 @@ not displayed
No point feature
-
No point feature was detected at the clicked position. Please click closer to the feature or enhance the search tolerance under Settings->Options->Digitizing->Serch radius for vertex edits
-
No rotation Attributes
-
The active point layer does not have a rotation attribute
-
Rotate symbol
-
@@ -32927,12 +32687,12 @@ not displayed
Hid labels
-
Showed labels
-
@@ -32940,23 +32700,23 @@ not displayed
Geometry simplified
-
Unsupported operation
-
Multipart features are not supported for simplification.
-
This feature cannot be simplified. Check if feature has enough vertices to be simplified.
-
@@ -32964,49 +32724,49 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Features split
-
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
No feature split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
@@ -33014,53 +32774,53 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Split error
-
@@ -33068,22 +32828,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
@@ -33093,39 +32853,39 @@ not displayed
Millimeter
-
Map unit
-
Interval
-
Line offset
-
Placement
-
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -33133,17 +32893,17 @@ not displayed
Measure
-
Total
-
Segments
-
@@ -33156,62 +32916,62 @@ not displayed
The calculations are based on:
-
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
@@ -33219,12 +32979,12 @@ not displayed
Incorrect measure results
-
<p>This map is defined with a geographic coordinate system (latitude/longitude) but the map extents suggests that it is actually a projected coordinate system (e.g., Mercator). If so, the results from line or area measurements will be incorrect.</p><p>To fix this, explicitly set an appropriate map coordinate system using the <tt>Settings:Project Properties</tt> menu.
-
@@ -33232,58 +32992,58 @@ not displayed
Whole number (integer)
-
Decimal number (real)
-
Text (string)
-
Date
-
Whole number (smallint - 16bit)
-
Whole number (integer - 32bit)
-
Whole number (integer - 64bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (double)
-
Text, unlimited length (text)
-
@@ -33291,57 +33051,57 @@ not displayed
Skip attribute
-
Id
-
Merge
- Combina
+
Feature %1
-
Minimum
- Mínim
+
Maximum
- Màxim
+
Median
- Mediana
+
Sum
- Suma
+
Concatenation
-
Mean
- Mitjana
+
Skipped
-
@@ -33349,17 +33109,17 @@ not displayed
Merge feature attributes
-
Take attributes from selected feature
-
Remove feature from selection
-
@@ -33367,7 +33127,7 @@ not displayed
Remaining messages
-
%n more
unread messages
-
-
+
@@ -33395,38 +33151,38 @@ not displayed
QGIS Log
-
No messages.
-
%1 message(s) logged.
-
General
-
Timestamp
-
Message
-
Level
-
@@ -33434,7 +33190,7 @@ not displayed
QGIS Message
-
Show non-spatial tables
-
Edit...
-
Delete
-
%1: Not a vector layer!
-
%1: OK!
-
Import to MSSQL database
-
Failed to import some layers!
-
Import was successful.
-
@@ -33494,13 +33250,13 @@ not displayed
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Should the existing connection %1 be overwritten?
-
Test connection
-
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
-
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
-
Connection to %1 was successful
-
@@ -33550,27 +33306,27 @@ not displayed
Connection Information
-
Name
- Nom
+
Provider/DSN
-
Host
-
Database
-
Password
-
Trusted Connection
-
&Test Connect
-
Only look in the geometry_columns metadata table
-
Also list tables with no geometry
-
Use estimated table parameters
-
@@ -33628,72 +33384,72 @@ not displayed
8 Bytes integer
-
4 Bytes integer
-
2 Bytes integer
-
1 Bytes integer
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length (text)
-
Text, unlimited length unicode (ntext)
-
@@ -33709,12 +33465,12 @@ not displayed
%1 as %2 in %3
-
as geometryless table
-
@@ -33732,118 +33488,118 @@ not displayed
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Schema
- Esquema
+
Table
- Taula
+
Type
- Tipus
+
Geometry column
-
Primary key column
-
SRID
- SRID
+
Sql
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
MSSQL Provider
-
Stop
-
Connect
-
@@ -33851,7 +33607,7 @@ not displayed
Select...
- Selecciona...
+
@@ -33859,47 +33615,47 @@ not displayed
Schema
- Esquema
+
Table
- Taula
+
Type
- Tipus
+
Geometry column
-
SRID
- SRID
+
Primary key column
-
Select at id
-
Sql
-
Detecting...
-
Select...
- Selecciona...
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Enter...
-
Point
- Punt
+
Multipoint
-
Line
- Línia
+
Multiline
-
Polygon
- Polígon
+
Multipolygon
-
No Geometry
-
Unknown Geometry
-
@@ -33967,42 +33723,42 @@ not displayed
Not set
-
No enhancement
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
Red
-
Green
-
Blue
-
@@ -34010,35 +33766,35 @@ not displayed
Form
- Formulari
+
Contrast
enhancement
-
Min/max
-
Red band
-
Green band
-
Blue band
-
@@ -34046,12 +33802,12 @@ enhancement
Network request %1 timed out
-
Network
-
@@ -34059,7 +33815,7 @@ enhancement
Cannot find boundary in multipart content type
-
@@ -34072,37 +33828,37 @@ enhancement
all
-
off
-
QGIS
-
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
Should the existing connection %1 be overwritten?
-
Saving passwords
-
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
@@ -34136,27 +33892,27 @@ Note: giving the password is optional. It will be requested interactivly, when n
Connection details
-
DPI-Mode
-
URL
-
If the service requires basic authentication, enter a user name and optional password
-
Password
-
Name
- Nom
+
HTTP address of the Web Map Server
-
Ignore GetFeatureInfo URI reported in capabilities
-
Ignore GetMap/GetTile URI reported in capabilities
-
Ignore axis orientation (WMS 1.3/WMTS)
-
Invert axis orientation
-
Smooth pixmap transform
-
Referer
-
@@ -34215,7 +33971,7 @@ Note: giving the password is optional. It will be requested interactivly, when n
Test connection
-
Connection to %1 was successful
-
Should the existing connection %1 be overwritten?
-
@@ -34251,17 +34007,17 @@ Extended error information:
Connection Information
-
Type
- Tipus
+
Name
- Nom
+
Host
-
Database
-
Port
-
Password
-
&Test Connect
-
@@ -34309,17 +34065,17 @@ Extended error information:
Text data
-
Whole number
-
Decimal number
-
SpatiaLite
-
SpatiaLite Database
-
Unable to open the database
-
Error
- Error
+
Failed to load SRIDS: %1
-
@
-
Unable to open the database: %1
-
Error Creating SpatiaLite Table
-
Failed to create the SpatiaLite table %1. The database returned:
%2
-
Error Creating Geometry Column
-
Failed to create the geometry column. The database returned:
%1
-
Error Creating Spatial Index
-
Failed to create the spatial index. The database returned:
%1
-
Invalid Layer
-
%1 is an invalid layer and cannot be loaded.
-
@@ -34423,7 +34179,7 @@ Extended error information:
Database
-
...
-
Layer name
-
Geometry column
-
geometry
-
Type
- Tipus
+
Point
- Punt
+
Line
- Línia
+
Polygon
- Polígon
+
MultiPoint
-
Multiline
-
Multipolygon
-
Spatial Reference Id
-
Specify the coordinate reference system of the layer's geometry.
-
Specify CRS
-
Create an autoincrementing primary key
-
Name
- Nom
+
An attribute name
-
Attributes list
-
Delete selected attribute
-
Remove attribute
-
@@ -34566,43 +34322,43 @@ Extended error information:
Text data
-
Whole number
-
Decimal number
-
Date
-
ESRI Shapefile
-
Comma Separated Value
-
GML
-
Mapinfo File
-
File format
-
Type
- Tipus
+
Point
- Punt
+
Line
- Línia
+
Polygon
- Polígon
+
Name
- Nom
+
Width
- Amplada
+
Precision
-
Attributes list
-
Delete selected attribute
-
Remove attribute
-
Specify the coordinate reference system of the layer's geometry.
-
Specify CRS
-
File encoding
-
@@ -34714,12 +34470,12 @@ Extended error information:
No query has been specified.
-
There is already a pending request for data.
-
Extent
-
From map canvas
-
From layer
-
Manual
-
Output file
- Fitxer de sortida
+
...
-
Download error
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -34815,32 +34571,32 @@ Extended error information:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
...
-
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
- &Carrega al llenç en acabar
+
Tag
-
Count
-
SQLite databases (*.db)
-
Unable to open database:
%1
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -34916,28 +34672,28 @@ Extended error information:
Input XML file (.osm)
-
...
-
Output SpatiaLite DB file
-
Create connection (SpatiaLite) after import
-
Connection name
-
SQLite databases (*.db)
-
Failed to import OSM data:
%1
-
Import has been successful.
-
@@ -34978,12 +34734,12 @@ Extended error information:
WMS Password for %1
-
Password
-
@@ -34991,12 +34747,12 @@ Extended error information:
Edit...
-
Delete
-
@@ -35012,7 +34768,7 @@ Extended error information:
Add Layer(s) from a %1 Server
-
Always cache
-
Prefer cache
-
Prefer network
-
Always network
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
Coordinate Reference System (%n available)
crs count
-
-
+
Coordinate Reference System
-
Could not understand the response:
%1
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
@@ -35111,23 +34863,23 @@ Extended error information:
Add Layer(s) from a Server
-
Ready
-
Layers
-
C&onnect
-
Edit
- Edita
+
Delete
-
Load connections from file
-
Load
-
Add default servers
-
ID
-
Name
- Nom
+
Title
-
Abstract
-
Time
-
Coordinate Reference System:
-
Selected Coordinate Reference System
-
Change ...
-
Format
-
Options
- Opcions
+
Layer name
-
Tile size
-
Feature limit for GetFeatureInfo
-
Cache
-
Layer Order
-
Move selected layer UP
-
Up
- Amunt
+
Move selected layer DOWN
-
Down
- Avall
+
Layer
- Capa
+
Style
-
Tilesets
-
Styles
-
Size
-
CRS
-
Server Search
-
Search
- Cerca
Description
- Descripció
+
URL
-
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
-
Unable to activate FOREIGN_KEY constraints
-
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Offline Editing Plugin
-
Could not open the spatialite logging database
-
@@ -35392,7 +35144,7 @@ Always network: always load from network and do not check if the cache has a val
Convert to offline project
-
&Offline Editing
-
Synchronize
-
Synchronize offline project with remote layers
-
Synchronizing to remote layers
-
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -35468,22 +35220,22 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
-
SpatiaLite DB
-
All files
-
Offline Editing Plugin
-
Offline database file '%1' exists. Overwrite?
-
@@ -35506,22 +35258,22 @@ Always network: always load from network and do not check if the cache has a val
Offline data
-
Browse...
-
Select remote layers
-
Show only editable layers
-
@@ -35529,7 +35281,7 @@ Always network: always load from network and do not check if the cache has a val
Layer %1 of %2..
-
@@ -35537,12 +35289,12 @@ Always network: always load from network and do not check if the cache has a val
Dialog
- Diàleg
+
TextLabel
-
@@ -35556,7 +35308,7 @@ Always network: always load from network and do not check if the cache has a val
OGR
-
Data source is invalid, no layer found (%1)
-
OGR
-
Data source is invalid (%1)
-
Whole number (integer)
-
Decimal number (real)
-
Text (string)
-
Date
-
Date & Time
-
OGR[%1] error %2: %3
-
Unknown
-
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
type %1 for field %2 not found
-
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
Feature %1 for attribute update not found.
-
Field %1 of feature %2 doesn't exist.
-
Type %1 of attribute %2 of feature %3 unknown.
-
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
Shapefiles without attribute are considered read-only.
-
@@ -35749,13 +35501,13 @@ Always network: always load from network and do not check if the cache has a val
Raster file:
-
...
-
Choose a name of the raster
-
Error
- Error
+
The selected file is not a valid raster file.
-
Choose a name for the modified raster
-
-modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -35796,7 +35548,7 @@ Always network: always load from network and do not check if the cache has a val
Open an OGR Supported Vector Layer
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
No database selected.
-
Password for
-
Please enter your password:
-
No protocol URI entered.
-
No layers selected.
-
No directory selected.
-
@@ -35862,66 +35614,66 @@ Always network: always load from network and do not check if the cache has a val
Source type
-
File
-
Directory
-
Database
-
Protocol
-
Encoding
- Codificació
+
Type
- Tipus
+
URI
-
Source
-
Dataset
-
Browse
- Navega
+
Connections
-
Edit
- Edita
+
Delete
-
@@ -35944,12 +35696,12 @@ Always network: always load from network and do not check if the cache has a val
Options Dialog Template
-
GroupBox
-
@@ -35957,345 +35709,345 @@ Always network: always load from network and do not check if the cache has a val
Identify highlight color
-
not present
-
System value: %1
-
Show all features
-
Show selected features
-
Always
-
If needed
-
Never
-
Load all
-
Check file contents
-
Check extension
-
No
-
Basic scan
-
Full scan
-
Cumulative pixel count cut
-
Minimum / maximum
-
Mean +/- standard deviation
-
Select grid color
-
Solid
-
Dots
-
Crosses
-
- Detected active locale on your system: %1
-
-
- To vertex
-
-
- To segment
-
-
- To vertex and segment
-
-
- map units
-
-
- pixels
-
-
- Semi transparent circle
-
-
- Cross
-
-
- None
-
-
- QGIS files
-
Off
- To vertex
+
- QGIS
- To segment
+
+
+ To vertex and segment
+
+
+ map units
+
+
+ pixels
+
+
+ Semi transparent circle
+
+
+ Cross
+
+
+ None
+
+
+ QGIS files
+
+
+ Off
+
QGIS
+
+
+ GEOS
-
- Round
-
- Mitre
-
- Bevel
-
- Save default project
Desa el projecte per defecte
- You must set a default project
Heu de triar un projecte per defecte
- Current project saved as default
El projecte actual s'ha desat com a predeterminat
- Error saving current project as default
S'ha produït un error en desar el projecte actual com a predeterminat
- Choose a directory to store project template files
Tria un directori per emmagatzemar els fitxers de plantilla del projecte
Selection color
-
Show features visible on map
-
- Choose project file to open at launch
Tria un fitxer de projecte per obrir en engegar
- Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
-
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
-
- If Undefined
-
- Unset
-
- Prepend
-
- Append
-
- Choose a directory
-
- Enter scale
-
- Scale denominator
-
- Load scales
-
- XML files (*.xml *.XML)
-
- Save scales
Desa les escales
- No Stretch
-
- Stretch To MinMax
-
- Stretch And Clip To MinMax
-
- Clip To MinMax
-
None / Planimetric
-
@@ -36303,166 +36055,166 @@ Always network: always load from network and do not check if the cache has a val
Options
- Opcions
+
General
-
System
-
Data Sources
-
Data sources
-
Rendering
-
Canvas & Legend
-
Canvas and legend
-
Map Tools
-
Map tools
-
Digitizing
-
GDAL
-
CRS
-
Locale
-
Network
-
Application
-
Style <i>(QGIS restart required)</i>
-
Icon theme
-
Icon size
-
16
- 16
+
24
- 24
+
32
- 32
+
Font
-
Qt default
-
Size
-
Timeout for timed messages or dialogs
-
s
-
Hide splash screen at startup
-
Show tips at start up
-
Bold group box titles
-
QGIS-styled group boxes
-
New
-
Most recent
-
Specific
- Específica
+
...
-
Reset default
-
Template folder
-
Browse
- Navega
+
Reset
- Reinicia
+
Warn when opening a project file saved with an older version of QGIS
-
Enable macros
-
Never
-
Ask
-
For this session only
-
Always (not recommended)
-
QSettings
-
Reset the User Interface settings, to reset QGIS to it's default view
-
Environment
-
Apply
-
Variable
-
Value
- Valor
+
Remove
- Suprimeix
+
Add
Afegeix
Current environment variables (read-only - bold indicates modified at startup)
-
Show only QGIS-specific variables
-
Use custom variables (restart required - include separators)
-
Plugin paths
-
Path(s) to search for additional C++ plugins libraries
-
SVG paths
-
Path(s) to search for Scalable Vector Graphic (SVG) symbols
-
Feature attributes and table
-
Open attribute table in a dock window (QGIS restart required)
-
Copy geometry in WKT representation from attribute table
-
Attribute table behaviour
-
Attribute table row cache
-
Representation for NULL values
-
Data source handling
-
Scan for valid items in the browser dock
-
Scan for contents of compressed files (.zip) in browser dock
-
Prompt for raster sublayers when opening
-
Add PostGIS layers with double click and select in extended mode
-
Rendering behavior
-
Use render caching where possible to speed up redraws
-
Render layers in parallel using many CPU cores
-
Max cores to use:
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Rendering quality
-
Make lines appear less jagged at the expense of some drawing performance
-
Rasters
-
RGB band selection
-
Red band
-
Green band
-
Blue band
-
Contrast enhancement
-
Single band gray
-
Multi band color (byte / band)
-
Multi band color (> byte / band)
-
Limits (minimum/maximum)
-
Cumulative pixel count cut limits
-
-
-
%
- %
+
Standard deviation multiplier
-
Debugging
-
Show these events in the Log Message panel (under Rendering tab)
-
Map canvas refresh
-
Selection color
-
Highlight color
-
<html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
Buffer
-
Lines / outlines buffer in millimeters.
-
Minimum width
-
Minimum line / outline width in millimeters.
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
-
-
- Suppress attribute form pop-up after feature creation
-
Background color
-
Use live-updating color chooser dialogs
-
Ignore shapefile encoding declaration
-
Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
Custom side bar style
-
Add Oracle layers with double click and select in extended mode
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
Simplify on provider side if possible
-
Layer legend
-
Double click action in legend
-
Capitalise layer names
-
Bold layer names
-
Display classification attribute names
-
Bold group names
-
Create raster icons (may be slow)
-
Legend item styles
-
WMS getLegendGraphic Resolution
-
Identify
-
<b>Note:</b> Specify the search radius as a percentage of the map width
-
Search radius for identifying features and displaying map tips
-
Measure tool
-
Rubberband color
-
Preferred measurements units
-
Meters
-
Feet
-
Nautical Miles
-
Preferred angle units
-
Degrees
-
Map update interval
-
ms
-
Enable feature simplification by default for newly added layers
-
Radians
-
Decimal places
-
Keep base unit
-
Gon
-
Panning and zooming
-
Zoom factor
-
Mouse wheel action
-
Zoom
-
Zoom and recenter
-
Zoom to mouse cursor
-
Nothing
-
Predefined scales
-
Add predefined scale
-
Remove selected
-
Insert default scales
-
Import from file
-
Export to file
-
Composition defaults
-
Default font
-
Grid appearance
-
Grid style
-
Color...
-
+
+ Grid defaults
+
+
+ Spacing
+
mm
-
Grid offset
-
x:
-
y:
-
Snap tolerance
-
- Guide defaults
+
+
+ Feature creation
-
- Validate geometries
-
- Reuse last entered attribute values
-
- Rubberband
-
- Line color
-
- Line width in pixels
-
- Line width
-
- Snapping
-
- Default snap mode
-
- Default snapping tolerance
-
- Search radius for vertex edits
-
- map units
-
pixels
-
- Open snapping options in a dock window (QGIS restart required)
-
- Vertex markers
-
- Marker style
-
- Marker size
-
- Show markers only for selected features
-
-
- Curve offset tool
-
-
- Miter limit
-
-
- Join style
-
Curve offset tool
+
+
+ Miter limit
+
+
+ Join style
+
+
+ Quadrant segments
-
- GDAL driver options
-
- Edit Pyramids Options
-
-
- Edit Create Options
-
-
- GDAL drivers
-
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
-
Name
- Nom
-
-
- ext
- Edit Create Options
+
GDAL drivers
+
+
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+
+
+ Name
+
+
+ ext
+
+
+ Flags
-
- Description
- Descripció
+
- CRS for new layers
SRC per les capes noves
- Select...
- Selecciona...
+
- Use &project CRS
Utilitza un &projecte SRC
- Prompt for &CRS
-
- Use default CRS displa&yed below
-
- When a new layer is created, or when a layer is loaded that has no CRS
Quan no tenen SRC la capa que es crea nova o la que s'obre
- Default CRS for new projects
SRC per defecte per projectes nous
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
- Always start new projects with this CRS
-
- Enable 'on the &fly' reprojection by default
-
- Don't enable 'on the fly' reprojection
-
- Default datum transformations
-
- Source CRS
-
- Destination CRS
-
- Source datum transform
-
- Destination datum transform
-
- Ask for datum transformation when no default is defined
-
- Override system locale
-
- Locale to use instead
-
- <b>Note:</b> Enabling / changing overide on local requires an application restart
-
- Additional Info
Informació addicional
- Detected active locale on your system:
-
- WMS search address
-
- Timeout for network requests (ms)
-
- Default expiration period for WMS-C/WMTS tiles (hours)
-
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
Cache settings
- Max retry in case of tile request errors
+
- Directory
-
-
- Size [KiB]
- User-Agent
+
Cache settings
+
+
+ Directory
+
+
+ Size [KiB]
+
+
+ Clear
-
- Use proxy for web access
-
- Host
-
- Port
-
- User
Usuari
- Leave this blank if no proxy username / password are required
-
-
- Password
-
-
- Proxy type
-
-
+ Leave this blank if no proxy username / password are required
+
+
+ Password
+
+
+ Proxy type
+
+
+ Exclude URLs (starting with)
-
@@ -37580,7 +37335,7 @@ Always network: always load from network and do not check if the cache has a val
Missing objects
-
@@ -37596,17 +37351,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -37614,7 +37369,7 @@ Missing some of the .ui template objects:
Connection to database failed
-
Oracle
-
SQL:%1
error:%2
-
Database connection was successful, but the accessible tables could not be determined.
-
Unable to get list of spatially enabled tables from the database
-
Unsupported geometry type %1 in %2.%3.%4 ignored
-
View %1.%2 doesn't have integer columns for use as keys.
-
Point
- Punt
+
Multipoint
-
Line
- Línia
+
Multiline
-
Polygon
- Polígon
+
Multipolygon
-
No Geometry
-
Unknown Geometry
-
@@ -37710,61 +37465,61 @@ error:%2
Edit...
-
Delete
-
Refresh
-
Copying features...
-
Abort
-
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to Oracle database
-
Failed to import some layers!
-
Import was successful.
-
@@ -37774,12 +37529,12 @@ error:%2
Delete layer
-
Layer deleted successfully.
-
@@ -37787,13 +37542,13 @@ error:%2
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Should the existing connection %1 be overwritten?
-
Test connection
-
Connection to %1 was successful
-
Connection failed - Check settings and try again.
-
@@ -37834,12 +37589,12 @@ error:%2
Connection Information
-
Password
-
Database
-
Name
- Nom
+
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
Also list tables with no geometry
-
Port
-
1521
- 1521
+
&Test Connect
-
Host
-
Use estimated table statistics for the layer metadata.
-
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Use estimated table metadata
-
@@ -37958,12 +37713,12 @@ error:%2
%1 as %2 in %3
-
as geometryless table
-
@@ -37976,7 +37731,7 @@ error:%2
Add a Oracle Spatial GeoRaster...
-
@@ -37984,52 +37739,52 @@ error:%2
Whole number
-
Whole big number
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
-
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
-
Primary key field %1 not found in %2
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
No key field for query given.
-
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -38481,32 +38236,32 @@ Error: %2
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Password for %1/<password>@%2
-
Please enter your password:
-
Open failed
-
The connection to %1 failed. Please verify your connection parameters. Make sure you have the GDAL GeoRaster plugin installed.
-
@@ -38514,7 +38269,7 @@ Error: %2
Add Oracle Table(s)
-
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Owner
-
Table
- Taula
+
Type
- Tipus
+
Geometry column
-
Primary key column
-
SRID
- SRID
+
Sql
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
Stop
-
Connect
-
@@ -38638,12 +38393,12 @@ Error: %2
Select...
- Selecciona...
+
Enter...
-
@@ -38651,76 +38406,76 @@ Error: %2
Owner
-
Table
- Taula
+
Type
- Tipus
+
Geometry column
-
SRID
- SRID
+
Primary key column
-
Select at id
-
Sql
-
Specify a geometry type
-
Enter a SRID
-
Select a primary key
-
Select...
- Selecciona...
+
Enter...
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -38728,61 +38483,61 @@ Error: %2
Edit...
-
Delete
-
Refresh
-
Copying features...
-
Abort
-
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to PostGIS database
-
Failed to import some layers!
-
Import was successful.
-
@@ -38792,12 +38547,12 @@ Error: %2
Delete layer
-
Layer deleted successfully.
-
@@ -38813,12 +38568,12 @@ Error: %2
%1 as %2 in %3
-
as geometryless table
-
@@ -38826,27 +38581,27 @@ Error: %2
Form
- Formulari
+
Band
-
Value
- Valor
+
Color
-
Label
-
@@ -38854,22 +38609,22 @@ Error: %2
Paste Transformations
-
<b>Note: This function is not useful yet!</b>
-
Source
-
Destination
-
@@ -38877,17 +38632,17 @@ Error: %2
Square
-
Flat
-
Round
-
@@ -38895,17 +38650,17 @@ Error: %2
Bevel
-
Miter
-
Round
-
@@ -38913,32 +38668,32 @@ Error: %2
Solid Line
-
No Pen
-
Dash Line
-
Dot Line
-
Dash Dot Line
-
Dash Dot Dot Line
-
@@ -38946,33 +38701,33 @@ Error: %2
disable
-
allow
-
prefer
-
require
-
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Should the existing connection %1 be overwritten?
-
Test connection
-
Connection to %1 was successful
-
Connection failed - Check settings and try again.
-
@@ -39013,37 +38768,37 @@ Error: %2
Connection Information
-
Name
- Nom
+
Service
-
Host
-
Port
-
Database
-
SSL mode
-
Password
-
5432
- 5432
+
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
Only show layers in the layer registries
-
Restrict the search to the public schema for spatial tables not in the geometry_columns table
-
When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
-
Only look in the 'public' schema
-
&Test Connect
-
Use estimated table statistics for the layer metadata.
-
Use estimated table metadata
-
Also list tables with no geometry
-
Don't resolve type of unrestricted columns (GEOMETRY)
-
@@ -39161,112 +38916,112 @@ Error: %2
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Schema
- Esquema
+
Table
- Taula
+
Type
- Tipus
+
Geometry column
-
Primary key column
-
SRID
- SRID
+
Sql
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
Stop
-
Connect
-
@@ -39275,12 +39030,12 @@ Error: %2
Select...
- Selecciona...
+
Enter...
-
@@ -39288,79 +39043,79 @@ Error: %2
Schema
- Esquema
+
Table
- Taula
+
Column
- Columna
+
Data Type
-
Spatial Type
-
SRID
- SRID
+
Primary Key
-
Select at id
-
Sql
-
Select a primary key
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Select...
- Selecciona...
+
Specify a geometry type
-
Enter a SRID
-
Enter...
-
@@ -39368,32 +39123,32 @@ Error: %2
Form
- Formulari
+
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- Amplada
+
Height
- Alçada
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39401,12 +39156,12 @@ Error: %2
Select a picture
-
...
-
@@ -39421,188 +39176,188 @@ Error: %2
There is a plugin update available
-
QGIS Python Plugin Installer
-
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
-
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
-
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
-
Plugin installation failed
-
Plugin has disappeared
-
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
-
Plugin installed successfully
-
Plugin reinstalled successfully
-
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
-
The plugin is broken. Python said:
-
Plugin uninstall failed
-
Are you sure you want to uninstall the following plugin?
-
Warning: this plugin isn't available in any accessible repository!
-
Plugin uninstalled successfully
-
Unable to add another repository with the same URL!
-
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
-
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
QGIS Official Plugin Repository
-
Nothing to remove! Plugin directory doesn't exist:
-
Failed to remove the directory:
-
Check permissions or remove it manually
-
QgsPluginInstallerFetchingDialog
Success
-
Resolving host name...
-
Connecting...
-
Host connected. Sending request...
-
Downloading data...
-
Idle
-
Closing connection...
-
Error
- Error
+
@@ -39610,70 +39365,70 @@ You need to restart QGIS in order to reload it.
Fetching repositories
-
Overall progress:
-
Abort fetching
-
Repository
-
State
-
QgsPluginInstallerInstallingDialog
Installing...
-
Resolving host name...
-
Connecting...
-
Host connected. Sending request...
-
Downloading data...
-
Idle
-
Closing connection...
-
Error
- Error
+
Failed to unzip the plugin package. Probably it's broken or missing from the repository. You may also want to make sure that you have write permission to the plugin directory:
-
Aborted by user
-
@@ -39681,24 +39436,24 @@ You need to restart QGIS in order to reload it.
QGIS Python Plugin Installer
-
Installing plugin:
-
Connecting...
-
QgsPluginInstallerPluginErrorDialog
no error message received
-
@@ -39706,17 +39461,17 @@ You need to restart QGIS in order to reload it.
Error loading plugin
-
The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below:
-
Do you want to uninstall this plugin now? If you're unsure, probably you would like to do this.
-
@@ -39724,50 +39479,50 @@ You need to restart QGIS in order to reload it.
Repository details
-
Enter a name for the repository
-
Name
- Nom
+
Enter the repository URL, beginning with "http://"
-
Enable or disable the repository (disabled repositories will be omitted)
-
Parameters
- Paràmetres
+
?qgis=
-
URL
-
Enabled
-
@@ -39776,88 +39531,88 @@ You need to restart QGIS in order to reload it.
Plugins
- Connectors
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
No Plugins
-
No QGIS plugins found in %1
-
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
-
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
Installable
category: plugins that are available for installation
-
This plugin is incompatible with this version of QGIS
-
Plugin designed for QGIS %1
compatible QGIS version(s)
-
This plugin requires a missing module
-
This plugin is broken
-
Installed version of this plugin is higher than any version found in repository
-
This plugin is experimental
-
This plugin is deprecated
-
Category
-
Tags
-
Author
-
More info
-
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Upgrade plugin
-
Downgrade plugin
-
Install plugin
-
Reinstall plugin
-
Reload all repositories
-
Only show plugins from selected repository
-
Clear filter
-
connected
-
The repository is connected
-
unavailable
-
The repository is enabled, but unavailable
-
disabled
-
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
@@ -40061,37 +39816,37 @@ You need to restart QGIS in order to reload it.
Plugin Manager
-
All
-
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
Not installed plugins seen for the first time
-
Invalid
-
Broken and incompatible installed plugins
-
Settings
-
Search
-
Not installed
-
about:blank
-
Upgrade all upgradeable plugins
-
Upgrade all
-
Uninstall the selected plugin
-
Uninstall plugin
-
Install, reinstall or upgrade the selected plugin
-
Reinstall plugin
-
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
Check for updates on startup
-
every time QGIS starts
-
once a day
-
every 3 days
-
every week
-
every 2 weeks
-
every month
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
-
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Status
-
Name
- Nom
+
URL
-
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Edit the selected repository
-
Edit...
-
Remove the selected repository
-
Delete
-
@@ -40317,19 +40072,19 @@ p, li { white-space: pre-wrap; }
None
-
Label Font
-
The point displacement renderer only applies to (single) point layers.
'%1' is not a point layer and cannot be displayed by the point displacement renderer
-
@@ -40337,77 +40092,77 @@ p, li { white-space: pre-wrap; }
Form
- Formulari
+
Center symbol:
-
Renderer:
-
Renderer settings...
-
Displacement circles
-
Circle pen width:
-
Circle color:
-
Circle radius modification:
-
Point distance tolerance:
-
Labels
-
Label attribute:
-
Label font...
-
Label color:
-
Use scale dependent labelling
-
max scale denominator:
-
@@ -40418,7 +40173,7 @@ p, li { white-space: pre-wrap; }
Millimeter
-
Map unit
-
Horizontal distance
-
Vertical distance
-
Horizontal displacement
-
Vertical displacement
-
@@ -40454,7 +40209,7 @@ p, li { white-space: pre-wrap; }
Connection to database failed
-
PostGIS
-
error in setting encoding
-
undefined return value from encoding setting
-
Your database has no working PostGIS support.
-
Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net)
-
Database connection was successful, but the accessible tables could not be determined.
-
Database connection was successful, but the accessible tables could not be determined. The error message from the database was:
%1
-
Database connection was successful, but the accessible tables could not be determined.
The error message from the database was:
%1
-
Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry.
-
Unable to get list of spatially enabled tables from the database
-
Retrieval of postgis version failed
-
Could not parse postgis version string '%1'
-
Connection error: %1 returned %2 [%3]
-
Erroneous query: %1 returned %2 [%3]
-
Query failed: %1
Error: no result buffer
-
Query: %1 returned %2 [%3]
-
%1 cursor states lost.
SQL: %2
Result: %3 (%4)
-
resetting bad connection.
-
retry after reset succeeded.
-
retry after reset failed again.
-
connection still bad after reset.
-
bad connection, not retrying.
-
Point
- Punt
+
Multipoint
-
Line
- Línia
+
Multiline
-
Polygon
- Polígon
+
Multipolygon
-
No Geometry
-
Unknown Geometry
-
None
-
Geometry
- Geometria
+
Geography
-
TopoGeometry
-
Query could not be canceled [%1]
-
PQgetCancel failed
-
@@ -40682,7 +40437,7 @@ Result: %3 (%4)
invalid PostgreSQL layer
-
PostGIS
-
invalid PostgreSQL topology layer
-
PostgreSQL layer has no primary key.
-
Whole number (smallint - 16bit)
-
Whole number (integer - 32bit)
-
Whole number (integer - 64bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, unlimited length (text)
-
Date
-
PostgreSQL layer has unknown primary key type.
-
Read attempt on an invalid postgresql data source
-
FAILURE: Field %1 not found.
-
unexpected formatted field type '%1' for field %2
-
Field %1 ignored, because of unsupported type %2
-
Field %1 ignored, because of unsupported type type %2
-
Duplicate field %1 found
-
PostgreSQL is still in recovery after a database crash
(or you are connected to a (read-only) slave).
Write accesses will be denied.
-
The custom query is not a select query.
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
Unexpected relation type '%1'.
-
No key field for query given.
-
Could not find topology of layer %1.%2.%3
-
PostGIS error while adding features: %1
-
PostGIS error while deleting features: %1
-
PostGIS error while adding attributes: %1
-
PostGIS error while deleting attributes: %1
-
PostGIS error while changing attributes: %1
-
PostGIS error while changing geometry values: %1
-
result of extents query invalid: %1
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
PostgreSQL version: unknown
-
unknown
-
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -40962,32 +40717,32 @@ PostGIS %2
Loading layer %1
-
Unable to open %1
-
Project File Read Error
-
%1 at line %2 column %3
-
Project file read error: %1 at line %2 column %3
-
%1 for file %2
-
%1 is not writable. Please adjust permissions (if possible) and try again.
-
Unable to save to file %1. Your project may be corrupted on disk. Try clearing some space on the volume and check file permissions before pressing save again.
-
@@ -41010,18 +40765,18 @@ PostGIS %2
Ignore
-
QGIS Project Read Error
-
Unable to open one or more project layers.
Choose ignore to continue loading without the missing layers. Choose cancel to return to your pre-project load state. Choose OK to try to find the missing layers.
-
@@ -41034,17 +40789,17 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
QGIS files
-
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -41052,7 +40807,7 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select layers and groups to embed
-
...
-
QgsProjectProperties
- Layer
- Capa
+
+
+ Type
+
Type
- Tipus
-
-
- Identifiable
-
- Vector
- Vector
+
- WMS
-
- Raster
- Ràster
+
- Coordinate System Restriction
-
- No coordinate systems selected. Disabling restriction.
-
- Selection color
-
+
+ Measure tool (CRS transformation: %1)
+
Measure tool (CRS transformation: %1)
-
-
- Canvas units (CRS transformation: %1)
-
+ OFF
-
+ ON
-
- CRS %1 was already selected
-
+
+ Coordinate System Restrictions
+
Coordinate System Restrictions
-
-
- The current selection of coordinate systems will be lost.
Proceed?
-
- Select print composer
Selecciona una composició d'impressió
- Composer Title
Títol de la composició
- Select restricted layers and groups
-
+
+ Enter scale
+
Enter scale
- Scale denominator
+
- Scale denominator
- Load scales
+
Load scales
-
-
- XML files (*.xml *.XML)
-
-
XML files (*.xml *.XML)
+
+
+ Save scales
Desa les escales
- Select a valid symbol
-
- Invalid symbol :
-
- Parameters:
-
+ Select %1 from pull-down menu to adjust radii
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
-
@@ -41232,23 +40987,22 @@ Proceed?
General
-
General settings
-
Project title
Títol del projecte
Descriptive project name
-
Selection color
-
Background color
-
absolute
-
relative
-
Desa els camins
- Measure tool
-
- Semi-minor
-
+
+ Semi-major
+
Semi-major
-
-
- Used when CRS transformation is turned off
-
- Canvas units
-
- Meters
-
- Feet
-
CRS
-
Coordinate Reference System
-
Identify layers
-
Default styles
-
OWS server
-
- Ellipsoid
(for distance calculations)
-
- Degree
-
- Degree display
-
- Decimal degrees
-
- Degrees, Minutes
-
- Degrees, Minutes, Seconds
-
- Precision
-
- Automatically sets the number of decimal places in the mouse position display
-
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
-
-
- Automatic
-
-
- Sets the number of decimal places to use for the mouse position display
-
-
- Manual
-
-
- The number of decimal places for the manual option
-
decimal places
- Automatic
+
- Sets the number of decimal places to use for the mouse position display
+
+
+ Manual
+
+
+ The number of decimal places for the manual option
+
+
+ decimal places
+
+
+ Project scales
Escales per defecte
- ...
-
- Enable 'on the fly' CRS transformation
-
Identifiable layers
-
- Project layers
Capes del projecte
- Layer
- Capa
+
- Type
- Tipus
+
- Identifiable
-
- Marker
-
- Line
- Línia
+
- Default symbols
-
- Fill
-
- Color Ramp
-
- Transparency
-
- %
-
- Style Manager
-
- Options
- Opcions
+
Relations
-
- Project file
- Fitxer de projecte
-
-
- Nautical miles
-
- Assign random colors to symbols
-
- Service capabilities
-
- Person
-
- Title
-
- Organization
-
- Online resource
-
- E-Mail
-
- Phone
-
- Abstract
-
- Fees
-
- Access constraints
-
- Keyword list
-
- WMS capabilities
-
- Add geometry to feature response
-
- Min. X
-
- Min. Y
-
- Max. X
-
- Max. Y
-
- Use Current Canvas Extent
-
- Used
-
- Exclude composers
Exclou composicions
- WFS capabilities
-
- WCS capabilities
-
- Exclude layers
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
- Published
-
- Update
-
- Insert
-
- Delete
-
- Unselect all
-
- Select all
- Selecciona-ho tot
+
Macros
-
- Advertised URL
-
- Width
- Amplada
+
- Height
- Alçada
+
- Maximums for GetMap request
-
- Advertised extent
-
- CRS restrictions
-
- Python macros
-
@@ -41731,29 +41480,29 @@ Proceed?
User Defined Coordinate Systems
-
Geographic Coordinate Systems
-
Projected Coordinate Systems
-
Resource Location Error
-
Error reading database file from:
%1
Because of this the projection selector will not work...
-
@@ -41761,50 +41510,50 @@ Because of this the projection selector will not work...
Coordinate Reference System Selector
-
Filter
-
Recently used coordinate reference systems
-
Coordinate Reference System
-
Selected CRS:
-
Authority ID
-
ID
-
Coordinate reference systems of the world
-
Hide deprecated CRSs
-
@@ -41812,46 +41561,42 @@ Because of this the projection selector will not work...
&Test
-
&Clear
- &Neteja
+
Set provider filter on %1
-
Query Result
-
The where clause returned %n row(s).
returned test rows
-
-
+
Query Failed
-
An error occurred when executing the query.
-
The data provider said:
%1
-
Error in Query
-
The subset string could not be set
-
@@ -41877,69 +41622,69 @@ The data provider said:
Query Builder
-
Datasource
-
Fields
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
-
Values
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
-
Sample
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
-
All
-
Use unfiltered layer
-
=
-
<
-
NOT
-
OR
-
AND
-
%
- %
+
IN
-
NOT IN
-
!=
-
>
-
LIKE
-
ILIKE
-
>=
-
<=
-
Provider specific filter expression
-
@@ -42028,29 +41773,29 @@ p, li { white-space: pre-wrap; }
Editable
-
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42058,32 +41803,32 @@ p, li { white-space: pre-wrap; }
Form
- Formulari
+
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Maximum
- Màxim
+
Minimum
- Mínim
+
Local minimum/maximum = 0/0
-
@@ -42096,7 +41841,7 @@ p, li { white-space: pre-wrap; }
Expression valid
-
...
-
+
-
*
-
sin
-
^
-
acos
-
(
-
-
-
/
-
cos
-
asin
-
tan
-
atan
-
)
-
<
-
>
-
=
-
OR
-
AND
-
<=
-
>=
-
Format not supported
-
Value
- Valor
+
Text
-
Html
-
Feature
-
@@ -42325,41 +42070,41 @@ p, li { white-space: pre-wrap; }
Default
-
No compression
-
Low compression
-
High compression
-
JPEG compression
-
Cannot get create options for driver %1
-
For details on pyramids options please see the following pages
-
cannot validate pyramid options
-
Cannot validate creation options
-
Valid
-
pyramid creation option
-
creation option
-
Profile name:
-
Use simple interface
-
Use table interface
-
@@ -42421,47 +42166,47 @@ Click on help button to get valid creation options for this format.
Form
- Formulari
+
New
-
Remove
- Suprimeix
+
Reset
- Reinicia
+
Profile
-
Name
- Nom
+
Value
- Valor
+
+
-
Validate
-
-
-
Insert KEY=VALUE pairs separated by spaces
-
@@ -42484,114 +42229,114 @@ Click on help button to get valid creation options for this format.
Visibility
-
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Show all bands
-
Show RGB/Gray band(s)
-
Show selected band
-
Display
-
Draw as lines
-
Draw as lines (only int layers)
-
Actions
-
Reset
- Reinicia
+
Load min/max
-
Estimate (faster)
-
Actual (slower)
-
Current extent
-
Use stddev (1.0)
-
Use stddev (custom)
-
Load for each band
-
Recompute Histogram
-
Band %1
-
Form
- Formulari
+
Set min/max style for
-
Min
- Mínim
+
Pick Min value on graph
-
...
-
Max
- Màxim
+
Pick Max value on graph
-
Prefs/Actions
-
Save plot
-
Compute Histogram
-
@@ -42663,27 +42408,27 @@ Click on help button to get valid creation options for this format.
Identify
-
Build Pyramids
-
Create Datasources
-
Remove Datasources
-
Band
-
@@ -42693,192 +42438,192 @@ Click on help button to get valid creation options for this format.
Not Set
-
QgsRasterLayer created
-
Raster
- Ràster
+
No Data Value
-
NoDataValue not set
-
Could not determine raster data type.
-
Driver
-
Data Type
-
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Band
-
Band No
-
No Stats
-
No stats collected yet
-
Min Val
-
Max Val
-
Range
-
Mean
- Mitjana
+
Sum of squares
-
Standard Deviation
-
Sum of all cells
-
Cell Count
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
<maplayer> not found.
-
@@ -42886,89 +42631,89 @@ Click on help button to get valid creation options for this format.
Not Set
-
Description
- Descripció
+
Large resolution raster layers can slow navigation in QGIS.
-
By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom.
-
You must have write access in the directory where the original data is stored to build pyramids.
-
Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
-
Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
-
Layer Properties - %1
-
Nearest neighbour
-
Bilinear
-
Cubic
-
Average
-
None
-
Red
-
Green
-
Blue
-
Percent Transparent
-
Gray
- Escala de grisos
+
Indexed Value
-
From
-
To
-
not defined
-
n/a
-
No-Data Value:
-
No-Data Value: %1
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Textfile
-
QGIS Generated Transparent Pixel Value Export File
-
Value
- Valor
+
Write access denied. Adjust the file permissions and try again.
-
Open file
- Obre un fitxer
+
Import Error
-
The following lines contained errors
%1
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Default Style
-
Load layer properties from style file
-
QGIS Layer Style File
-
Raster Layer Properties
-
Load Style ...
-
Resolutions
-
Render type
-
Resampling
-
Oversampling
-
Transparency
-
Style
-
Layer info
-
Description
- Descripció
+
Keyword list
-
Format
-
Attribution
-
Url
-
MetadataUrl
-
Type
- Tipus
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
-
Band rendering
-
Color rendering
-
Saturation
-
Off
-
By lightness
-
By luminosity
-
By average
-
Hue
-
Blending mode
-
Brightness
-
Contrast
-
Grayscale
-
Colorize
-
Strength
-
%
- %
+
Reset all color rendering options to default
-
Reset
- Reinicia
+
Zoomed: in
-
out
-
Global transparency
-
None
-
00%
-
<p align="right">Full</p>
-
No data value
-
Use original source no data value.
-
No data value:
-
Original data source no data value, if exists.
-
<src no data value>
-
Additional user defined no data value.
-
Additional no data value
-
Custom transparency options
-
Transparency band
-
Add values from display
-
Transparent pixel list
-
Add values manually
-
...
-
Remove selected row
-
Default values
-
Import from file
-
Export to file
-
General
-
Layer name
-
displayed as
-
Layer source
-
No Data
-
Scale dependent visibility
-
Coordinate reference system
-
Specify the coordinate reference system of the layer's geometry.
-
Specify...
-
Thumbnail
-
Legend
-
Palette
-
Metadata
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Title
-
Abstract
-
Pyramids
-
Average
-
Nearest Neighbour
-
Build pyramids
-
Resampling method
-
Overview format
-
External
-
Internal (if possible)
-
External (Erdas Imagine)
-
Histogram
-
@@ -43653,57 +43398,57 @@ p, li { white-space: pre-wrap; }
From
-
To
-
Select output directory
-
Warning
- Avís
+
The directory %1 contains files which will be overwritten: %2
-
Select output file
-
GeoTIFF
-
layer
-
user defined
-
Resolution (current: %1)
-
Layer (%1, %2)
-
Selected (%1, %2)
-
@@ -43726,43 +43471,43 @@ p, li { white-space: pre-wrap; }
Output mode
-
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Format
-
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
Create VRT
-
Browse...
-
CRS
-
Change ...
-
Extent
-
Resolution
-
Horizontal
-
Layer resolution
-
Layer size
-
Vertical
-
VRT Tiles
-
Maximum number of columns in one tile.
-
Max columns
-
Maximum number of rows in one tile.
-
Max rows
-
Create Options
-
Pyramids
-
Resolutions
-
Pyramid resolutions corresponding to levels given
-
Use existing
-
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
-
Add values manually
-
...
-
Load user defined fully transparent (100%) values
-
Remove selected row
-
Clear all
-
@@ -43920,12 +43665,12 @@ datasets with maximum width and height specified below.
No option selected
-
Please select an option to load min/max values.
-
@@ -43933,74 +43678,74 @@ datasets with maximum width and height specified below.
Form
- Formulari
+
Load min/max values
-
-
-
%
- %
+
Min / max
-
Extent
-
Full
-
Current
-
Accuracy
-
Actual (slower)
-
Estimate (faster)
-
Cumulative
count cut
-
Mean +/-
standard deviation ×
-
Load
-
@@ -44008,62 +43753,62 @@ standard deviation ×
Form
- Formulari
+
Insert positive integer values separated by spaces
-
External (GTiff .ovr)
-
Internal (if possible)
-
External (Erdas Imagine .aux)
-
Levels
-
Create Options
-
Resampling method
-
Average
-
Nearest Neighbour
-
Custom levels
-
Overview format
-
@@ -44071,53 +43816,53 @@ standard deviation ×
Unknown
-
User defined
-
Estimated
-
Exact
-
min / max
-
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
-
@@ -44125,17 +43870,17 @@ standard deviation ×
Export Frequency distribution as csv
-
Export Colors and elevations as xml
-
Import Colors and elevations from xml
-
The relief color file could not be opened
-
Error parsing xml
-
The xml file could not be loaded
-
Enter result file
- Introduïu el fitxer del resultat
+
Enter lower elevation class bound
-
Elevation
-
Enter upper elevation class bound
-
Select color for relief class
-
@@ -44189,12 +43934,12 @@ standard deviation ×
Dialog
- Diàleg
+
Elevation layer
-
...
-
Z factor
-
Illumination
-
Azimuth (horizontal angle)
-
Vertical angle
-
Relief colors
-
Create automatically
-
Export distribution...
-
Up
- Amunt
+
Down
- Avall
+
+
-
-
-
Lower bound
-
Upper bound
-
Color
-
Export colors...
-
Import colors...
-
@@ -44302,41 +44047,41 @@ standard deviation ×
Terrain analysis
-
Slope
-
Aspect
- Aspecte
+
Hillshade
-
Relief
-
Ruggedness index
-
Calculating hillshade...
-
Abort
-
Calculating relief...
-
Calculating slope...
-
Calculating aspect...
-
Ruggedness
-
Calculating ruggedness...
-
@@ -44378,7 +44123,7 @@ standard deviation ×
Preview Expression
-
@@ -44386,32 +44131,32 @@ standard deviation ×
Dialog
- Diàleg
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -44419,19 +44164,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -44439,7 +44184,7 @@ standard deviation ×
[Generated automatically]
-
@@ -44447,37 +44192,37 @@ standard deviation ×
Add relation
-
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
- Nom
+
Id
-
@@ -44485,13 +44230,13 @@ standard deviation ×
Form
- Formulari
+
Toggle editing
-
Delete
-
Link
-
Unlink
-
Form View
-
Table View
-
@@ -44529,47 +44274,47 @@ standard deviation ×
Dialog
- Diàleg
+
Name
- Nom
+
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
-
Add Relation
-
Remove Relation
-
@@ -44577,17 +44322,17 @@ standard deviation ×
Open Form
-
(no selection)
- (cap selecció)
+
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -44595,69 +44340,65 @@ standard deviation ×
Rule properties
-
Label
-
Filter
-
...
-
Test
-
Description
- Descripció
+
Scale range
-
Symbol
-
Error
- Error
+
Filter expression parsing error:
-
Evaluation error
-
Filter returned %n feature(s)
number of filtered features
-
-
+
@@ -44665,24 +44406,24 @@ standard deviation ×
Rotation field
-
Size scale field
-
Scale area
-
Scale diameter
-
- expression -
-
- no field -
-
@@ -44709,32 +44450,32 @@ standard deviation ×
Renderer settings
-
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
This renderer doesn't implement a graphical interface.
-
@@ -44742,88 +44483,88 @@ standard deviation ×
Copy
- Copia
+
Paste
-
Change color
-
Change transparency
-
Change output unit
-
Change width
-
Change size
-
Transparency
-
Change symbol transparency [%]
-
Symbol unit
-
Select symbol unit
-
Millimeter
-
Map unit
-
Width
- Amplada
+
Change symbol width
-
Size
-
Change symbol size
-
@@ -44831,52 +44572,52 @@ standard deviation ×
(no filter)
-
<li><nobr>%1 features also in rule %2</nobr></li>
-
Label
-
Rule
-
Min. scale
-
Count
-
Duplicate count
-
Max. scale
-
Number of features in this rule.
-
Number of features in this rule which are also present in other rule(s).
-
@@ -44884,103 +44625,103 @@ standard deviation ×
Add rule
-
Edit rule
-
Remove rule
-
Refine current rules
-
Count features
-
Rendering order...
-
Remove Rule
-
Refine current rule
-
Add scales to rule
-
Add categories to rule
-
Add ranges to rule
-
Refine a rule to categories
-
Refine a rule to ranges
-
Scale refinement
-
Parent rule %1 must have a symbol for this operation.
-
Please enter scale denominators at which will split the rule, separate them by commas (e.g. 1000,5000):
-
Error
- Error
+
"%1" is not valid scale denominator, ignoring it.
-
Calculating feature count.
-
Abort
-
@@ -44988,28 +44729,28 @@ standard deviation ×
<b>Starting %1...</b>
-
Action
- Acció
+
Unable to run command
%1
-
Done
-
Unable to run command %1
-
@@ -45017,61 +44758,61 @@ standard deviation ×
Database does not exist
-
Failed to open database
-
Failed to check metadata
-
Failed to get list of tables
-
Unknown error
-
Delete
-
%1: Not a vector layer!
-
%1: OK!
-
Import to SpatiaLite database
-
Failed to import some layers!
-
Import was successful.
-
@@ -45081,12 +44822,12 @@ standard deviation ×
Delete layer
-
Layer deleted successfully.
-
@@ -45099,7 +44840,7 @@ standard deviation ×
Create database...
-
SpatiaLite
-
Create SpatiaLite database
-
The database has been created
-
Failed to create the database:
-
@@ -45134,55 +44875,55 @@ standard deviation ×
Texture width
-
SVG file
-
Millimeter
-
Map unit
-
Select SVG texture file
-
All files
-
Rotation
-
Color
-
Border color
-
Border width
-
@@ -45195,27 +44936,27 @@ standard deviation ×
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
@@ -45228,22 +44969,22 @@ standard deviation ×
Description
- Descripció
+
UI
-
Style Name
-
Use as default style for this layer
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45262,29 +45003,29 @@ standard deviation ×
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -45292,7 +45033,7 @@ standard deviation ×
Scale visibility
-
@@ -45300,17 +45041,17 @@ standard deviation ×
Search query builder
-
&Test
-
&Clear
- &Neteja
+
&Load...
-
Load query from xml file
-
Search results
-
Found %n matching feature(s).
test result
-
-
+
Search string parsing error
-
Evaluation error
-
Error during search
-
No Records
-
The query you specified results in zero records being returned.
-
Error
- Error
+
Could not open file for writing
-
Load query from file
-
Query files
-
All files
-
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
Select attribute
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -45437,47 +45174,43 @@ standard deviation ×
Validation started.
-
Validation finished (%n error(s) found).
number of geometry errors
-
-
+
ring %1, vertex %2
-
polygon %1, ring %2, vertex %3
-
polyline %1, vertex %2
-
vertex %1
-
point %1
-
single point
-
@@ -45485,7 +45218,7 @@ standard deviation ×
Scanning
-
The database gave an error while executing this SQL:
-
... (rest of SQL trimmed)
is appended to a truncated SQL statement
-
The error was:
%1
-
@@ -45523,48 +45256,48 @@ The error was:
Millimeter
-
Map unit
-
Color (start)
-
Color (end)
-
Blur radius
-
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -45573,28 +45306,28 @@ The error was:
Millimeter
-
Map unit
-
Color
-
Border color
-
Border width
-
@@ -45604,44 +45337,44 @@ The error was:
Millimeter
-
Map unit
-
Color
-
Pen width
-
Offset
-
Dash pattern
-
Join style
-
Cap style
-
@@ -45651,54 +45384,54 @@ The error was:
Millimeter
-
Map unit
-
Name
- Nom
+
Fill color
-
Border color
-
Outline width
-
Angle
- Angle
+
Offset
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -45706,32 +45439,32 @@ The error was:
Black to white
-
White to black
-
No enhancement
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
@@ -45739,33 +45472,33 @@ The error was:
Form
- Formulari
+
Contrast
enhancement
-
Gray band
-
Min
- Mínim
+
Max
- Màxim
+
Color gradient
-
@@ -45777,7 +45510,7 @@ enhancement
Discrete
-
Linear
-
Exact
-
Continuous
-
Equal interval
-
Custom color map entry
-
Load Color Map
-
The color map for band %1 has no entries
-
Textfile (*.txt)
-
Import Error
-
The following lines contained errors
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
QGIS Generated Color Map Export File
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
@@ -45884,22 +45617,22 @@ enhancement
Form
- Formulari
+
Band
-
Color interpolation
-
Add values manually
-
...
-
Remove selected row
-
Sort colormap items
-
Load color map from band
-
Load color map from file
-
Export color map to file
-
Value
- Valor
+
Color
-
Label
-
Clip
-
Generate new color map
-
Mode
-
Classes
-
Min
- Mínim
+
Max
- Màxim
+
Invert
-
Classify
-
Min / max origin:
-
Min / Max origin
-
@@ -46007,7 +45740,7 @@ enhancement
Symbol levels...
-
@@ -46015,32 +45748,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -46048,12 +45781,12 @@ enhancement
Form
- Formulari
+
The Symbol
-
@@ -46061,22 +45794,22 @@ enhancement
ALL the constraints
-
any ONE of the constraints
-
Invalid name
-
The smart group name field is empty. Kindly provide a name
-
@@ -46084,27 +45817,27 @@ enhancement
Smart Group Editor
-
Smart Group Name
-
Condition matches
-
Add Condition
-
Conditions
-
@@ -46112,34 +45845,34 @@ enhancement
Snapping and Digitizing Options
-
to vertex
-
to segment
-
to vertex and segment
-
map units
-
pixels
-
@@ -46147,32 +45880,32 @@ enhancement
Snapping options
-
Layer
- Capa
+
Mode
-
Tolerance
- Tolerància
+
Units
-
Avoid Int.
-
Enable topological editing
-
Enable snapping on intersection
-
@@ -46195,70 +45928,70 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
unknown error cause
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
UNKNOWN
-
GEOMETRY
-
POINT
-
LINESTRING
-
POLYGON
-
MULTIPOINT
-
MULTILINESTRING
-
MULTIPOLYGON
-
GEOMETRYCOLLECTION
-
@@ -46266,27 +45999,27 @@ enhancement
Binary object (BLOB)
-
Text
-
Decimal number (double)
-
Whole number (integer)
-
Retrieval of spatialite version failed
-
SpatiaLite
-
Could not parse spatialite version string '%1'
-
SQLite error: %2
SQL: %1
-
unknown cause
-
FAILURE: Field %1 not found.
-
@@ -46378,12 +46111,12 @@ SQL: %1
Databases
-
&Update statistics
-
&Set Filter
-
Wildcard
-
RegExp
-
All
-
Table
- Taula
+
Type
- Tipus
+
Geometry column
-
Sql
-
Confirm Update Statistics
-
Update Statistics
-
Internal statistics successfully updated for: %1
-
Error while updating internal statistics for: %1
-
@
-
Choose a SpatiaLite/SQLite DB to open
-
SpatiaLite DB
-
All files
-
Error
- Error
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Select Table
-
You must select a table in order to add a Layer.
-
SpatiaLite DB Open Error
-
Database does not exist: %1
-
Failure while connecting to: %1
%2
-
SpatiaLite getTableInfo Error
-
Failure exploring tables from: %1
%2
-
SpatiaLite Error
-
Unexpected error when working with: %1
%2
-
@@ -46564,52 +46297,52 @@ but implies better performance thereafter.
Table
- Taula
+
Type
- Tipus
+
Geometry column
-
Sql
-
Point
- Punt
+
Multipoint
-
Line
- Línia
+
Multiline
-
Polygon
- Polígon
+
Multipolygon
-
@@ -46617,78 +46350,74 @@ but implies better performance thereafter.
The spatial query requires at least two vector layers
-
%n selected geometries
selected geometries
-
-
+
Selected geometries
-
%1)Query
-
Begin at %L1
-
< %1 >
-
Total of features = %1
-
Total of invalid features:
-
Finish at %L1 (processing time %L2 minutes)
-
Using the field "%1" for subset
-
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
%1 of %2
-
all = %1
-
%1 of %2(selected features)
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
user
- de l'usuari
+
Map "%1" "on the fly" transformation.
-
enable
-
disable
-
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Zoom to feature
-
Missing reference layer
-
Select reference layer!
-
Missing target layer
-
Select target layer!
-
The query from "%1" using "%2" in field not possible.
-
%1 of %2 identified
-
@@ -46811,122 +46540,122 @@ CRS of map is %1.
Spatial Query
-
Layer on which the topological operation will select geometries
-
Select source features from
-
Select the target layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
-
Selected feature(s) only
-
Where the feature
-
Select the topological operation
-
Layer whose geometries will be used as reference by the topological operation
-
Reference features of
-
Select the reference layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
-
And use the result to
-
Selected features
-
Number of selected features in map
-
Create layer with selected
-
Result feature ID's
-
Select one FID to identify geometry of feature
-
Create layer with list of items
-
Zoom to item
-
Check to show log processing of query
-
Log messages
-
&Spatial Query
-
Query not executed
-
DEBUG
-
@@ -46959,38 +46688,38 @@ p, li { white-space: pre-wrap; }
Select a Spatialite Spatial Reference System
-
SRID
- SRID
+
Authority
-
Reference Name
-
Search
- Cerca
Filter
-
Name
- Nom
+
@@ -46998,79 +46727,79 @@ p, li { white-space: pre-wrap; }
File Name
-
Feature Class
-
Features
-
DB Relation Name
-
Schema
- Esquema
+
Are you sure you want to remove the [%1] connection and all associated settings?
-
Confirm Delete
-
Add Shapefiles
-
Shapefiles
-
All files
-
The following Shapefile(s) could not be loaded:
-
REASON: File cannot be opened
-
REASON: One or both of the Shapefile files (*.dbf, *.shx) missing
-
General Interface Help:
-
PostgreSQL Connections:
-
[Edit ...] - edit the currently selected connection
-
[Remove] - remove the currently selected connection
-
-you need to select a connection that works (connects properly) in order to import files
-
-when changing connections Global Schema also changes accordingly
-
Shapefile List:
-
[Add ...] - open a File dialog and browse to the desired file(s) to import
-
[Remove] - remove the currently selected file(s) from the list
-
[Remove All] - remove all the files in the list
-
[SRID] - Reference ID for the shapefiles to be imported
-
[Use Default (SRID)] - set SRID to -1
-
[Geometry Column Name] - name of the geometry column in the database
-
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
-
[Global Schema] - set the schema for all files to be imported into
-
[Import] - import the current shapefiles in the list
-
[Quit] - quit the program
-
[Help] - display this help dialog
-
Import Shapefiles
-
You need to specify a Connection first
-
Password for %1
-
Please enter your password:
-
Connection failed - Check settings and try again
-
PostGIS not available
-
<p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
-
You need to add shapefiles to the list first
-
Importing files
-
Progress
-
Problem inserting features from file:
-
%1
Invalid table name.
-
%1
No fields detected.
-
%1
The following fields are duplicates:
%2
-
Importing files
%1
-
%1
<p>Error while executing the SQL:</p><p>%2</p><p>The database said:%3</p>
-
Import Shapefiles - Relation Exists
-
%1 of %2 shapefiles could not be imported.
-
@@ -47303,23 +47032,23 @@ Do you want to overwrite the [%2] relation?
SPIT - Shapefile to PostGIS Import Tool
-
PostgreSQL connections
-
Connect to PostGIS
-
Connect
-
Edit the current PostGIS connection
-
Edit
- Edita
+
Remove the current PostGIS connection
-
Remove
- Suprimeix
+
Import options and shapefile list
-
Geometry column name
-
Set the geometry column name to the default value
-
Use default geometry column name
-
SRID
- SRID
+
Set the SRID to the default value
-
Use default SRID
-
Primary key column name
-
Global schema
-
Add a shapefile to the list of files to be imported
-
Remove the selected shapefile from the import list
-
Remove all the shapefiles from the import list
-
Remove All
-
@@ -47436,18 +47165,18 @@ Do you want to overwrite the [%2] relation?
&Import Shapefiles to PostgreSQL
-
Import shapefiles into a PostGIS-enabled PostgreSQL database. The schema and field names can be customized on import
-
&Spit
-
@@ -47460,15 +47189,15 @@ Do you want to overwrite the [%2] relation?
TextLabel
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47482,7 +47211,155 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
+
+
+ QgsSqlAnywhereProvider
+
+ Failed to load interface
+
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
@@ -47490,58 +47367,58 @@ p, li { white-space: pre-wrap; }
Select all
- Selecciona-ho tot
+
Clear selection
-
Import style(s)
-
file specified below
-
URL specified below
-
Select symbols to import
-
Import
-
Export style(s)
-
Export
-
Export/import error
-
You should select at least one symbol/color ramp.
-
XML files (*.xml *.XML)
-
Error when saving selected symbols to file:
%1
-
Import error
-
An error occured during import:
%1
-
Group Name
-
imported
-
Cannot create a group without name. Enter a name.
-
Duplicate names
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
El símbol «%1» ja existeix.
El voleu sobreescriure?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
-
Load styles
-
XML files (*.xml *XML)
-
Downloading style ...
-
HTTP Error!
-
Download failed: %1.
-
@@ -47655,17 +47532,17 @@ Overwrite?
Styles import/export
-
Import from
-
Location
-
Select symbols to export
-
@@ -47683,86 +47560,86 @@ Overwrite?
Type here to filter symbols...
-
Share Menu
-
Export
-
Import
-
Group Actions
-
Group Symbols
-
Edit Smart Group
-
Marker symbol (%1)
-
Line symbol (%1)
-
Fill symbol (%1)
-
Color ramp (%1)
-
Gradient
-
Random
-
ColorBrewer
-
cpt-city
-
new fill symbol
-
Symbol Name
-
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Color Ramp Name
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Cannot save color ramp without name. Enter a name.
-
Save color ramp
-
Color ramp with name '%1' already exists. Overwrite?
-
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
Invalid selection
-
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
Error!
-
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
Database Error
- S'ha produït un error de la base de dades
+
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Add Group
-
Remove Group
-
Apply Group
-
Un-group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
@@ -48001,57 +47878,57 @@ There was a problem with your symbol database.
Style Manager
-
Marker
-
Line
- Línia
+
Fill
-
Color ramp
-
Tags
-
Add item
-
Edit item
-
Edit
- Edita
+
Remove item
-
Share
-
@@ -48066,24 +47943,24 @@ There was a problem with your symbol database.
Layer ID
-
Layer name
-
Number of features
-
Geometry type
-
Select layers to add...
-
Type
- Tipus
+
Select All
-
@@ -48111,12 +47988,12 @@ There was a problem with your symbol database.
Select layers to load
-
1
- 1
+
@@ -48124,22 +48001,22 @@ There was a problem with your symbol database.
SVG annotation
-
Delete
-
Select SVG file
-
SVG files
-
@@ -48147,23 +48024,23 @@ There was a problem with your symbol database.
SVG request failed [error: %1 - url: %2]
-
SVG
-
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -48171,17 +48048,17 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48191,64 +48068,64 @@ There was a problem with your symbol database.
Millimeter
-
Map unit
-
Select SVG file
-
SVG files
-
Border width
-
Angle
- Angle
+
Offset
-
SVG file
-
Color
-
Border color
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -48256,12 +48133,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -48269,17 +48146,17 @@ There was a problem with your symbol database.
Select SVG file
-
SVG files
-
File not found
-
@@ -48287,17 +48164,17 @@ There was a problem with your symbol database.
Size
-
area
- àrea
+
diameter
-
@@ -48305,7 +48182,7 @@ There was a problem with your symbol database.
Layer %1
-
@@ -48313,17 +48190,17 @@ There was a problem with your symbol database.
Symbol Levels
-
Enable symbol levels
-
Define the order in which the symbol layers are rendered. The numbers in the cells define in which rendering pass the layer will be drawn.
-
@@ -48331,22 +48208,22 @@ There was a problem with your symbol database.
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
- Desa el símbol
+
Symbol selector
-
Add symbol layer
-
Lock layer's color
-
Move up
-
Move down
-
Save symbol
- Desa el símbol
+
Save
- Desa
+
@@ -48402,32 +48279,32 @@ There was a problem with your symbol database.
Millimeter
-
Map unit
-
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
- Desa el símbol
+
Transparency %1%
-
@@ -48445,13 +48322,13 @@ There was a problem with your symbol database.
Linear
-
Clough-Toucher (cubic)
-
Triangle based interpolation
-
Interpolation method
-
Export triangulation to shapefile after interpolation
-
Output file
- Fitxer de sortida
+
...
-
@@ -48492,12 +48369,12 @@ There was a problem with your symbol database.
Delete
-
Select font color
-
@@ -48505,17 +48382,17 @@ There was a problem with your symbol database.
Annotation text
-
B
-
I
-
@@ -48523,17 +48400,17 @@ There was a problem with your symbol database.
Form
- Formulari
+
Multiline
-
HTML
-
@@ -48541,12 +48418,12 @@ There was a problem with your symbol database.
Form
- Formulari
+
Tile scale
-
@@ -48554,27 +48431,27 @@ There was a problem with your symbol database.
QGIS Publications
-
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
Become an QGIS translator
-
QGIS Mailing lists
-
Is it 'QGIS' or 'Quantum GIS'?
-
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -48740,21 +48617,21 @@ There was a problem with your symbol database.
QGIS Tips!
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
-
I've had enough tips, don't show this on start up any more!
-
@@ -48762,42 +48639,42 @@ p, li { white-space: pre-wrap; }
Dialog
- Diàleg
+
Select transformation type:
-
Linear
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin plate spline (TPS)
-
Generate ESRI world file (.tfw)
-
@@ -48805,54 +48682,54 @@ p, li { white-space: pre-wrap; }
Transformation settings
-
Transformation type:
-
Resampling method:
-
Nearest neighbour
-
Linear
-
Cubic
-
Cubic Spline
-
Lanczos
-
Compression:
-
Output raster:
-
...
-
Target SRS:
-
Generate pdf report:
-
Set Target Resolution
-
Horizontal
-
Vertical
-
Create world file
-
Generate pdf map:
-
Use 0 for transparency when needed
-
Load in QGIS when done
-
Helmert
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin Plate Spline
-
Projective
-
Info
- Informació
+
Please set output name
-
%1 requires at least %2 GCPs. Please define more
-
Invalid output file name
-
Select save PDF file
-
PDF Format
-
_modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -48988,17 +48865,17 @@ p, li { white-space: pre-wrap; }
Form
- Formulari
+
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Editable
-
@@ -49006,12 +48883,12 @@ p, li { white-space: pre-wrap; }
Form
- Formulari
+
Adjust scaling range
-
@@ -49019,18 +48896,18 @@ p, li { white-space: pre-wrap; }
Select a file
- Selecciona un fitxer
+
Error
- Error
+
Could not open file %1
Error was:%2
-
@@ -49038,12 +48915,12 @@ Error was:%2
Form
- Formulari
+
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Edit filter expression
-
@@ -49089,7 +48966,7 @@ Error was:%2
Select layer, key column and value column
-
Key column
-
Value column
-
Filter expression
-
ColorBrewer ramp
-
Scheme name
-
Colors
-
Preview
-
@@ -49168,7 +49045,7 @@ Error was:%2
Codec %1 not found. Falling back to system locale
-
Delete Features
-
Change Attribute Values
-
Delete Attributes
-
Create Spatial Index
-
Fast Access to Features at ID
-
Change Geometries
-
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -49226,27 +49103,27 @@ Error was:%2
X attribute
-
Y attribute
-
Length attribute
-
Angle attribute
-
Height attribute
-
@@ -49254,34 +49131,34 @@ Error was:%2
Discrete
-
Continuous
-
Gradient file : %1
-
License file : %1
- Fitxer de llicència : %1
Edit Stop Color
-
Offset of the stop
-
Add Color Stop
-
@@ -49301,63 +49178,63 @@ Error was:%2
Gradient color ramp
-
Color 1
-
Color 2
-
Change...
-
Type
- Tipus
+
Multiple stops
-
Add stop
-
Remove stop
-
Color
-
Offset (%)
-
Preview
-
Information
- Informació
+
@@ -49365,150 +49242,150 @@ Error was:%2
Updating feature count for layer %1
-
Abort
-
ERROR: no provider
-
ERROR: layer not editable
-
Commit errors:
%1
-
General
-
Layer comment
-
Storage type of this layer
-
Description of this provider
-
Source for this layer
-
Geometry type of the features in this layer
-
Primary key attributes
-
The number of features in this layer
-
Editing capabilities of this layer
-
Extents
-
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
Error: qgis element could not be found
-
xMin,yMin %1,%2 : xMax,yMax %3,%4
-
unknown extent
-
(Invalid transformation of layer extents)
-
Field
-
Type
- Tipus
+
Length
- Longitud
+
Precision
-
Comment
-
@@ -49517,167 +49394,115 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
-
+
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
-
+
SUCCESS: %n attribute(s) added.
added attributes count
-
-
+
ERROR: %n new attribute(s) not added
not added attributes count
-
- ERROR: No s'ha afegit %n atribut nou
- ERROR: No s'han afegit %n atributs nous
-
+ ERROR: No s'ha afegit %n atribut nou ERROR: No s'han afegit %n atributs nous
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
-
+
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
-
+
SUCCESS: %n feature(s) deleted.
deleted features count
-
-
+
ERROR: %n feature(s) not deleted.
not deleted features count
-
-
+
SUCCESS: %n feature(s) added.
added features count
-
-
+
ERROR: %n feature(s) not added.
not added features count
-
-
+
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
-
+
ERROR: %n geometries not changed.
not changed geometries count
-
-
+
Provider errors:
-
@@ -49687,24 +49512,24 @@ Error was:%2
QGIS Layer Style File
-
SLD File
-
Load from file
-
Load from database
-
Layer Properties - %1
-
Stop editing mode to enable this.
-
Insert expression
-
This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
-
The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
-
Not supported
-
Spatial Index
-
Creation of spatial index successful
-
Creation of spatial index failed
-
Load default style from:
-
Local database
-
Datasource database
-
Default Style
-
Loaded from Provider
-
No default style was found for this layer
-
Load layer properties from style file
-
Load Style
-
Error occured retrieving styles from database
-
The retrieved style is not a valid named style. Error message: %1
-
Layer Properties
-
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
Description
- Descripció
+
Keyword list
-
DataUrl
-
Format
-
Attribution
-
Url
-
MetadataUrl
-
Type
- Tipus
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
-
Load Style ...
-
Style
-
Labels
-
Labels (deprecated)
-
Display labels
-
Fields
-
General
-
Specify the coordinate reference system of the layer's geometry.
-
Query Builder
-
Display
-
Rendering
-
Layer info
-
Layer source
-
Data source encoding
-
Coordinate reference system
-
Specify...
-
Create spatial index
- Crea l'índex espacial
+
Update extents
-
Scale dependent visibility
-
Feature subset
-
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
-
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Map Tip display text
-
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
-
Inserts the selected field into the action
-
Insert field
-
HTML
-
Field
-
Layer name
-
displayed as
-
Metadata
-
Title
-
Abstract
-
Actions
-
Joins
-
Join layer
-
Join field
-
Target field
- Camp objectiu
+
Diagrams
-
@@ -50202,7 +50027,7 @@ Error was:%2
Layer CRS
-
Selected CRS
-
No symbology
-
Feature symbology
-
Symbol layer symbology
-
<Default>
-
Select the coordinate reference system for the vector file. The data points will be transformed from the layer coordinate reference system.
-
@@ -50257,37 +50082,37 @@ Error was:%2
Browse
- Navega
+
Encoding
- Codificació
+
CRS
-
Symbology export
-
Datasource Options
-
Custom Options
-
Layer Options
-
Format
-
Save only selected features
-
Data source
-
Layer
- Capa
+
This allows one to surpress attribute creation as some OGR drivers (eg. DGN, DXF) don't support it.
-
Skip attribute creation
-
Add saved file to map
-
1:
- 1:
+
Scale
-
@@ -50345,46 +50170,46 @@ Error was:%2
Random color ramp
-
Hue
-
from
-
to
-
Saturation
-
Value
- Valor
+
Classes
-
Preview
-
@@ -50392,12 +50217,12 @@ Error was:%2
Edit...
-
Delete
-
@@ -50413,12 +50238,12 @@ Error was:%2
Select a layer
-
No CRS selected
-
@@ -50426,7 +50251,7 @@ Error was:%2
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -50434,17 +50259,17 @@ Error was:%2
Edit...
-
Delete
-
Modify WFS connection
-
@@ -50452,52 +50277,52 @@ Error was:%2
DescribeFeatureType failed for url %1
-
WFS
-
unknown
-
received %1 bytes from %2
-
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
@@ -50523,42 +50348,42 @@ Error was:%2
&Build query
-
Build query
-
Network Error
-
Capabilities document is not valid
-
Server Exception
-
Error
- Error
+
No Layers
-
capabilities document contained no layers.
-
Modify WFS connection
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
@@ -50601,23 +50426,23 @@ Error was:%2
Filter:
-
Display WFS FeatureTypes containing this word in the title, name or abstract
-
Server connections
-
C&onnect
-
Edit
- Edita
+
Delete
-
Load connections from file
-
Load
-
Use title for layer name
-
Coordinate reference system
-
Change ...
-
@@ -50675,7 +50500,7 @@ Error was:%2
WMS Password for %1
-
@@ -50683,27 +50508,27 @@ Error was:%2
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
Edit...
-
Delete
-
@@ -50724,153 +50549,141 @@ Error was:%2
Add selected layers to map
- Afegeix les capes seleccionades al mapa
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
encoding %1 not supported.
-
WMS Provider
-
Failed to parse WMS URI
-
Failed to download capabilities:
-
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
-
+
Select layer(s)
-
Select layer(s) or a tileset
-
Select either layer(s) or a tileset
-
Coordinate Reference System (%n available)
crs count
-
-
+
No common CRS for selected layers.
-
No CRS selected
-
No image encoding selected
-
%n Layer(s) selected
selected layer count
-
-
+
Tileset selected
-
Could not understand the response. The %1 provider said:
%2
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
Confirm Overwrite
-
@@ -50888,17 +50701,17 @@ Error was:%2
Ready
-
Layers
-
C&onnect
-
Edit
- Edita
+
Delete
-
Add default servers
-
ID
-
Name
- Nom
+
Title
-
Abstract
-
Image encoding
-
Load connections from file
-
Load
-
Options
- Opcions
+
Layer name
-
Coordinate Reference System
-
Add Layer(s) from a WM(T)S Server
-
Change ...
-
Tile size
-
Feature limit for GetFeatureInfo
-
10
- 10
+
Layer Order
-
Move selected layer UP
-
Up
- Amunt
+
Move selected layer DOWN
-
Down
- Avall
+
Layer
- Capa
+
Style
-
Tilesets
-
Format
-
Tileset
-
CRS
-
Server Search
-
Search
-
Description
- Descripció
+
URL
-
empty capabilities document
-
Tried URL: %1
-
Capabilities request redirected.
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
WCS
-
%1 of %2 bytes of capabilities downloaded.
-
Exception
-
Could not get WCS capabilities: %1
-
Dom Exception
-
Version not supported
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -51189,7 +51002,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
-
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51266,27 +51079,27 @@ Response was:
Cannot describe coverage
-
Coverage not found
-
Cannot calculate extent
-
Cannot get test dataset.
-
Received coverage has wrong extent %1 (expected %2)
-
WCS
-
Rotating raster
-
Block read OK
-
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
Getting map via WCS.
-
No data received
-
Cannot create memory file
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request is for a Coverage not offered by the service instance.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
(No error code was reported)
-
(Unknown error code)
-
The WCS vendor also reported:
-
composed error message '%1'.
-
Cannot verify coverage full extent: %1
-
Property
-
Value
- Valor
+
Name (identifier)
-
Title
-
Abstract
-
Fixed Width
-
Fixed Height
-
Native CRS
-
Native Bounding Box
-
WGS 84 Bounding Box
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in format
-
Coverages
-
Cache Stats
-
Server Properties
-
Keywords
-
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
GetCapabilitiesUrl
-
Get Coverage Url
-
<font color="red">(advertised but ignored)</font>
-
And %1 more coverages
-
Format not supported
-
Read data error
-
RasterIO error:
-
@@ -51600,7 +51409,7 @@ Response was:
Field contains a filename or URL for a webpage
-
%1 of %2 bytes of capabilities downloaded.
-
Capabilities request redirected.
-
Redirect loop detected: %1
-
WMS
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
@@ -51652,7 +51461,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
-
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51700,22 +51509,22 @@ Response was:
Cannot parse URI
-
Cannot calculate extent
-
Cannot set CRS
-
Number of layers and styles don't match
-
WMS
-
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
Getting map via WMS.
-
Getting tiles.
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
image is NULL
-
unexpected image size
-
Status: %1
Reason phrase: %2
-
Redirect loop detected: %1
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request contains a CRS not offered by the server for one or more of the Layers in the request.
-
Request contains a SRS not offered by the server for one or more of the Layers in the request.
-
GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
-
Request is for a Layer in a Style not offered by the server.
-
GetFeatureInfo request is applied to a Layer which is not declared queryable.
-
GetFeatureInfo request contains invalid X or Y value.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
-
Request contains an invalid sample dimension value.
-
Request is for an optional operation that is not supported by the server.
-
(No error code was reported)
-
(Unknown error code)
-
The WMS vendor also reported:
-
Property
-
Value
- Valor
+
Name
- Nom
+
Visibility
-
Visible
-
Hidden
-
Title
-
Abstract
-
Can Identify
-
Yes
-
No
-
Can be Transparent
-
Can Zoom In
-
Cascade Count
-
Fixed Width
-
Fixed Height
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in style
-
LegendURLs
-
Server Properties
-
Selected Layers
-
Other Layers
-
Tile Layer Properties
-
Cache Stats
-
WMS Version
-
Keywords
-
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
Identify Formats
-
Layer Count
-
Tile Layer Count
-
GetCapabilitiesUrl
-
GetMapUrl
-
<font color="red">(advertised but ignored)</font>
-
GetFeatureInfoUrl
-
GetLegendGraphic
-
GetTileUrl
-
Tile templates
-
FeatureInfo templates
-
Tileset Properties
-
Identifier
-
Tile mode
-
WMTS
-
WMS-C
-
Invalid tile mode
-
Selected
-
Available Styles
-
CRS
-
Bounding Box
-
Available Tilesets
-
Selected tile matrix set
-
Scale
-
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
Width
- Amplada
+
Height
- Alçada
+
Top
-
Left
-
Bottom
-
Right
-
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Cache stats
-
Hits
-
Misses
-
Errors
-
Format not supported
-
Context not fully specified (extent was defined but width and/or height was not).
-
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
GML schema is not valid
-
GML is not valid
-
Cannot identify
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
identify request redirected.
-
Map getfeatureinfo error %1: %2
-
Cannot parse getfeatureinfo: %1
-
Map getfeatureinfo error: %1 [%2]
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52420,18 +52201,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
-
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -52514,28 +52279,28 @@ Reason phrase: %2
Select dimensions
-
Dimension
-
Value
- Valor
+
Abstract
-
Default
-
@@ -52543,22 +52308,22 @@ Reason phrase: %2
Dialog
- Diàleg
+
Raster layer:
-
Polygon layer containing the zones:
-
Output column prefix:
-
@@ -52568,17 +52333,17 @@ Reason phrase: %2
&Zonal statistics
-
Calculating zonal statistics...
-
Abort...
-
@@ -52586,7 +52351,7 @@ Reason phrase: %2
Record Metadata
-
@@ -52594,12 +52359,12 @@ Reason phrase: %2
Export feature
-
Select destination layer
-
Transportation layer
-
Layer
- Capa
+
Direction field
-
Value for forward direction
-
Value for reverse direction
-
Value two-way direction
-
Speed field
-
km/h
-
m/s
-
Default settings
-
Direction
-
Two-way direction
-
Forward direction
-
Reverse direction
-
Cost
-
Line lengths
-
Speed
-
Always use default
-
@@ -52706,42 +52471,42 @@ Reason phrase: %2
Road graph plugin settings
-
Time unit
-
Distance unit
-
Topology tolerance
-
second
-
hour
-
meter
-
kilometer
-
@@ -52749,49 +52514,49 @@ Reason phrase: %2
Shortest path
-
Start
-
Stop
-
Criterion
-
Length
- Longitud
+
Time
-
Calculate
-
Export
-
Clear
-
Point not selected
-
First, select start and stop points.
-
Plugin isn't configured
-
Plugin isn't configured!
-
Tie point failed
-
Start point doesn't tie to the road!
-
Stop point doesn't tie to the road!
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
Path not found
-
@@ -52855,101 +52620,456 @@ Reason phrase: %2
Settings
-
Road graph plugin settings
-
Road graph
-
SLDatabase
Run &Vacuum
-
&Database
- Base de &dades
+
Sorry
- Ho sento
+
No database selected or you are not connected to it.
-
+
+
+ SaDbTableModel
+
+ Schema
+
+
+ Table
+
+
+ Type
+
+
+ SRID
+
+
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
+
SaNewConnection
+ Save connection
- Desa la connexió
+ Desa la connexió
+
+
+ Should the existing connection %1 be overwritten?
+
+
+ Failed to load interface
+
+
+ Test connection
+
+
+ Connection to %1 was successful
+
+
+ Connection failed. Check settings and try again.
+
+SQL Anywhere error code: %1
+Description: %2
+
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Crea una connexió SQL Anywhere nova
+ Crea una connexió SQL Anywhere nova
+ Connection Information
+
+
+ Name
+
+
+ Host
+
+
+ Port
+
+
+ Server
+
+
+ Database
+
+
+ Connection Parameters
+
+
+ Username
- Nom d'usuari
+ Nom d'usuari
+ Password
+
+
+ Name of the new connection
- Nom de la connexió nova
+ Nom de la connexió nova
+ Name or IP address of computer hosting the database server (leave blank for local connections)
+
+
+ Port number used by the database server (leave blank for default 2638)
+
+
+ Name of the database server (leave blank for default server on host)
+
+
+ Name of the database (leave blank for default database on server)
+
+
+ Additional connection parameters
+
+
+ Database username
- Nom d'usuari de la base de dades
+ Nom d'usuari de la base de dades
+ Database password
+
+
+ Save the connection username in the registry
- Desa el nom d'usuari de la connexió al registre
+ Desa el nom d'usuari de la connexió al registre
+ Save Username
- Desa el nom d'usuari
+ Desa el nom d'usuari
+ &Test Connect
+
+
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Desa la contrasenya de la connexió al registre (AVÍS: NO ÉS SEGUR)
+ Desa la contrasenya de la connexió al registre (AVÍS: NO ÉS SEGUR)
+ Save Password
- Desa la contrasenya
+ Desa la contrasenya
+
+
+ Encrypt packets using simple encryption
+
+
+ Simple Encryption
+
+
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
+
+
+ Estimate table metadata
+
+
+ Search for geometry columns in tables owned by other users
+
+
+ Search other users' tables
+
SaSourceSelect
+ &Add
- &Afegeix
+ &Afegeix
+
+
+ &Set Filter
+
+
+ Wildcard
+
+
+ RegExp
+
+
+ All
+
+
+ Schema
+
+
+ Table
+
+
+ Type
+
+
+ SRID
+
+
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
+
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+
+
+ Confirm Delete
+
+
+ Select Table
+
+
+ You must select a table in order to add a layer.
+
+
+ Failed to load interface
+
+
+ Connection failed
+
+
+ Connection to database %1 failed. Check settings and try again.
+
+SQL Anywhere error code: %2
+Description: %3
+
+
+ No accessible tables found
+
+
+ Database connection was successful, but no tables containing geometry columns were %1.
+
+
+ found
+
+
+ found in your schema
+
SaSourceSelectBase
+ Add SQL Anywhere layer
+
+
+ SQL Anywhere Connections
+
+
+ Delete
+
+
+ Edit
+
+
+ New
- Nova
+ Nova
+
+
+ Connect
+
+
+ Search options
+
+
+ Search
+
+
+ Search mode
+
+
+ Search in columns
+
SaveAsPythonScriptAction
+
+ I/O error
+
Unable to save edits. Reason:
%s
- No es pot desar les edicions. Motiu:
+ No es pot desar les edicions. Motiu:
%s
@@ -52957,11 +53077,11 @@ Reason phrase: %2
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
@@ -52969,7 +53089,7 @@ Reason phrase: %2
I/O error
-
Unable to save edits. Reason:
@@ -52983,22 +53103,22 @@ Reason phrase: %2
Select Oracle Spatial GeoRaster
-
Server Connections
-
Edit
- Edita
+
Delete
-
C&onnect
-
Subdatasets
-
Selection
-
Update
-
Ready
-
@@ -53036,7 +53156,7 @@ Reason phrase: %2
Editor
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
-
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Font
-
Size
-
Enable Object Inspector (switching between tabs may be slow)
-
Console
-
APIs
-
Using preloaded APIs file
-
Path
-
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
@@ -53268,12 +53388,12 @@ Reason phrase: %2
Simplify line tolerance
-
Set tolerance
-
D'acord
+
+ SqlAnywhere
+
+ Add SQL Anywhere Layer...
+
+
+ Store vector layers within a SQL Anywhere database
+
+
+ Invalid Layer
+
+
+ %1 is an invalid layer and cannot be loaded.
+
+
SymbolsListWidget
Form
- Formulari
+
Unit
-
Opacity
-
Color
-
Open Library
-
Size
-
Rotation
-
°
-
Width
- Amplada
+
Symbols in group
-
Symbol Name
-
Advanced
-
@@ -53349,18 +53492,18 @@ Reason phrase: %2
TopologyChecker
-
Topology Checker for vector layer
-
&Topology Checker
-
@@ -53385,31 +53528,31 @@ Reason phrase: %2
ValidateDialog
Check geometry validity
-
Geometry errors
-
Total encountered errors
-
Error!
-
Please specify input vector layer
-
Please specify input field
-
Please specify output shapefile
- Especifiqueu el Shapefile de sortida
+
Cancel
@@ -53417,69 +53560,69 @@ Reason phrase: %2
Geometry
- Geometria
+
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Feature
-
Error(s)
-
VisualDialog
Error!
-
Please specify input vector layer
-
Please specify input field
-
List unique values
-
Unique values
-
Total unique values
-
Basics statistics
-
Statistics output
-
Nearest neighbour analysis
-
Nearest neighbour statistics
-
Cancel
@@ -53487,11 +53630,11 @@ Reason phrase: %2
Parameter
-
Value
- Valor
+
@@ -53499,12 +53642,12 @@ Reason phrase: %2
Form
- Formulari
+
Force point inside polygon
-
@@ -53512,92 +53655,92 @@ Reason phrase: %2
Form
- Formulari
+
Colors
-
Fill
-
Border
-
Left
-
HCenter
-
Right
-
Top
-
VCenter
-
Bottom
-
Outline style
-
Outline width
-
Rotation
-
Anchor point
-
Data defined properties...
-
Offset X,Y
-
Symbol width
-
Symbol height
-
@@ -53605,72 +53748,72 @@ Reason phrase: %2
Form
- Formulari
+
Offset X,Y
-
Rotation
-
Anchor point
-
Left
-
HCenter
-
Right
-
Top
-
VCenter
-
Bottom
-
Size
-
Color
-
Font family
-
°
-
@@ -53678,120 +53821,120 @@ Reason phrase: %2
Form
- Formulari
+
Two color
-
Color ramp
-
Gradient type
-
Linear
-
Radial
-
Conical
-
Coord mode
-
Object
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
x
- x
+
y
- y
+
Feature centroid
-
Reference Point 2
-
Angle
- Angle
+
°
-
Data defined properties...
-
Offset X,Y
-
@@ -53799,27 +53942,27 @@ Reason phrase: %2
Form
- Formulari
+
Angle
- Angle
+
Data defined properties...
-
Distance
-
Offset
-
@@ -53827,57 +53970,57 @@ Reason phrase: %2
Form
- Formulari
+
Marker placement
-
with interval
-
on every vertex
-
on last vertex only
-
on first vertex only
-
Offset along line
-
Rotate marker
-
Line offset
-
Data defined properties
-
on central point
-
@@ -53885,32 +54028,32 @@ Reason phrase: %2
Form
- Formulari
+
Vertical distance
-
Vertical displacement
-
Data defined properties...
-
Horizontal displacement
-
Horizontal distance
-
@@ -53918,57 +54061,57 @@ Reason phrase: %2
Form
- Formulari
+
Border width
-
Rotation
-
Texture width
-
Colors
-
Fill
-
Border
-
Data defined properties...
-
SVG Groups
-
SVG Symbols
-
...
-
@@ -53976,57 +54119,57 @@ Reason phrase: %2
Form
- Formulari
+
Gradient colors
-
Two color
-
Color ramp
-
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Blur strength
-
Offset X,Y
-
Data defined properties...
-
@@ -54034,52 +54177,52 @@ Reason phrase: %2
Form
- Formulari
+
Offset X,Y
-
Border width
-
Fill style
-
Colors
-
Border style
-
Join style
-
Data defined properties...
-
Fill
-
Border
-
@@ -54087,62 +54230,62 @@ Reason phrase: %2
Form
- Formulari
+
Color
-
Change
-
Pen width
-
Offset
-
Pen style
-
Join style
-
Cap style
-
Use custom dash pattern
-
Dash pattern unit
-
Data defined properties...
-
Draw line only inside polygon
-
@@ -54150,92 +54293,92 @@ Reason phrase: %2
Form
- Formulari
+
Size
-
Fill
-
Border
-
Outline style
-
Outline width
-
Anchor point
-
Left
-
HCenter
-
Right
-
Top
-
VCenter
-
Bottom
-
Data defined properties...
-
Colors
-
Angle
- Angle
+
°
-
Offset X,Y
-
@@ -54243,97 +54386,97 @@ Reason phrase: %2
Form
- Formulari
+
Colors
-
Fill
-
Border
-
Offset X,Y
-
Anchor point
-
Left
-
HCenter
-
Right
-
Top
-
VCenter
-
Bottom
-
Data defined properties...
-
Border width
-
Angle
- Angle
+
Size
-
SVG Groups
-
SVG Image
-
...
-
@@ -54341,32 +54484,32 @@ Reason phrase: %2
Form
- Formulari
+
SVG Images
-
SVG Groups
-
...
-
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
-
@@ -54374,77 +54517,77 @@ Reason phrase: %2
Form
- Formulari
+
Y attribute
-
Scale
-
X attribute
-
Vector field type
-
Height only
-
Polar
-
Cartesian
-
Angle units
-
Degrees
-
Radians
-
Angle orientation
-
Counterclockwise from east
-
Clockwise from north
-
Distance unit
-
@@ -54452,17 +54595,17 @@ Reason phrase: %2
XML Request / Response
-
Request
-
Response
-
@@ -54470,12 +54613,12 @@ Reason phrase: %2
QGIS Plugin Template
-
Plugin Template
-
@@ -54483,59 +54626,59 @@ Reason phrase: %2
Topology Checker
-
Validate All
-
Validate Extent
-
Topology not checked yet
-
Configure
-
Show topology errors
-
Show errors
-
Select automatic fix
-
Fix!
-
No errors were found
-
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
Abort
-
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -54745,7 +54888,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -54755,7 +54898,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -56180,13 +56401,13 @@ Click on one of the icons along the top of the composer window to select what ty
Converts DXF files in Shapefile format
-
&Dxf2Shp
-
@@ -56194,69 +56415,69 @@ Click on one of the icons along the top of the composer window to select what ty
Dxf Importer
-
Input and output
-
Input DXF file
-
...
-
Output file
- Fitxer de sortida
+
Export text labels
-
Output file type
-
Polyline
-
Polygon
- Polígon
+
Point
- Punt
+
Warning
- Avís
+
Please specify a file to convert.
-
Please specify an output file
-
Choose a DXF file to open
-
DXF files
-
Shapefile
-
@@ -56299,32 +56520,32 @@ For support send a mail to scala@itc.cnr.it
eVis Database Connection
-
eVis Event Id Tool
-
eVis Event Browser
-
Create layer from a database query
-
Open an Event Browers and display the selected feature
-
Open an Event Browser to explore the current layer's features
-
@@ -56333,12 +56554,12 @@ For support send a mail to scala@itc.cnr.it
Undefined
-
No predefined queries loaded
-
Open File
- Obre un fitxer
+
Error: You must select a database type
-
Error: No host name entered
-
Error: No database name entered
-
Connection to [%1.%2] established
-
connected
-
Tables
-
Connection to [%1.%2] failed: %3
-
Error: Parse error at line %1, column %2: %3
-
Error: Unabled to open file [%1]
-
Error: Query failed: %1
-
Error: Could not create temporary file, process halted
-
Error: A database connection is not currently established
-
@@ -56421,65 +56642,65 @@ For support send a mail to scala@itc.cnr.it
Database Connection
-
Predefined Queries
-
Load predefined queries
-
Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide.
-
The description of the selected query.
-
Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
-
not connected
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
-
Database Host
-
Enter the database host. If the database resides on your desktop you should enter ¨localhost¨. If you selected ¨MSAccess¨ as the database type this option will not be available.
-
Password to access the database.
-
Enter the name of the database.
-
Enter the port through which the database must be accessed if a MYSQL database is used.
-
Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established.
-
Connect
-
Select the type of database from the list of supported databases in the drop-down menu.
-
Database Name
-
Password
-
Database Type
-
Port
-
SQL Query
-
Run the query entered above. The status of the query will be displayed in the Output Console below.
-
Run Query
-
Enter the query you want to run in this window.
-
A window for status messages to be displayed.
-
Output Console
-
@@ -56567,17 +56788,17 @@ p, li { white-space: pre-wrap; }
Database File Selection
-
The name of the field that contains the Y coordinate of the points.
-
The name of the field that contains the X coordinate of the points.
-
Y Coordinate
-
X Coordinate
-
Generic Event Browser
-
Field
-
Value
- Valor
+
Warning
- Avís
+
This tool only supports vector data
-
No active layers found
-
Error
- Error
+
Unable to connect to either the map canvas or application interface
-
An invalid feature was received during initialization
-
Event Browser - Displaying records 01 of %1
-
Attribute Contents
-
Event Browser - Displaying records %1 of %2
-
Select Application
-
All ( * )
-
@@ -56685,82 +56906,82 @@ p, li { white-space: pre-wrap; }
Display
-
Use the Previous button to display the previous photo when more than one photo is available for display.
-
Previous
-
Use the Next button to display the next photo when more than one photo is available for display.
-
Next
-
All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green.
-
1
- 1
+
Image display area
-
Display area for the image.
-
Options
- Opcions
+
File path
-
Attribute containing path to file
-
Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
-
If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
-
Path is relative
-
If checked, the relative path values will be saved for the next session.
-
Remember this
-
Reset to default
-
Resets the values on this line to the default setting.
-
Reset
- Reinicia
+
Compass bearing
-
Attribute containing compass bearing
-
Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
-
If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
-
Display compass bearing
-
If checked, the Display Compass Bearing values will be saved for the next session.
-
Compass offset
-
Define the compass offset manually.
-
Manual
-
A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
Define the compass offset using a field from the vector layer attribute table.
-
From Attribute
-
Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
If checked, the compass offset values will be saved for the next session.
-
Resets the compass offset values to the default settings.
-
Relative paths
-
The base path or url from which images and documents can be “relative”
-
Base Path
-
The Base Path onto which the relative path defined above will be appended.
-
If checked, the Base Path will be saved for the next session.
-
Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
-
If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
-
Replace entire path/url stored in image path attribute with user defined
Base Path (i.e. keep only filename from attribute)
-
If checked, the current check-box setting will be saved for the next session.
-
Clears the check-box on this line.
-
If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
-
Apply Path to Image rules when loading docs in external applications
-
Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
-
Configure External Applications
-
File extension and external application in which to load a document of that type
-
A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
-
Extension
-
Application
-
Delete current row
-
Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
-
@@ -56993,208 +57214,208 @@ Base Path (i.e. keep only filename from attribute)
Zoom in
-
Zoom in to see more detail.
-
Zoom out
-
Zoom out to see more area.
-
Zoom to full extent
-
Zoom to display the entire image.
-
fTools
QGIS version detected:
-
This version of fTools requires at least QGIS version 1.0.0
Plugin will not be enabled.
-
&Analysis Tools
-
Distance matrix
- Matriu de distàncies
+
Sum line lengths
- Suma les longituds de les línies
+
Points in polygon
-
Basic statistics
-
List unique values
-
Nearest neighbour analysis
-
Mean coordinate(s)
-
Line intersections
- Interseccions de línies
+
&Research Tools
-
Random selection
- Selecció aleatòria
+
Random selection within subsets
- Selecció aleatòria en subconjunts
+
Random points
-
Regular points
- Punts regulars
+
Vector grid
- Graella vectorial
+
Select by location
- Selecciona per la ubicació
+
Polygon from layer extent
-
&Geoprocessing Tools
-
Convex hull(s)
-
Buffer(s)
-
Intersect
-
Union
-
Symetrical difference
-
Clip
-
Dissolve
-
Difference
-
Eliminate sliver polygons
- Elimina els polígons estella
+
G&eometry Tools
-
Export/Add geometry columns
-
Check geometry validity
-
Polygon centroids
-
Delaunay triangulation
-
Voronoi Polygons
-
Extract nodes
-
Simplify geometries
- Simplifica les geometries
+
Densify geometries
- Densifica geometries
+
Multipart to singleparts
-
Singleparts to multipart
-
Polygons to lines
-
Lines to polygons
-
&Data Management Tools
-
Define current projection
@@ -57202,25 +57423,25 @@ Plugin will not be enabled.
Join attributes by location
- Uneix els atributs segona la ubicació
+
Split vector layer
- Divideix una capa vectorial
+
Merge shapefiles to one
-
Create spatial index
- Crea l'índex espacial
+
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -57236,1857 +57457,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -59139,10 +59306,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59156,10 +59323,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -59180,10 +59347,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -59196,12 +59363,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -59217,16 +59384,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -59255,15 +59422,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -59280,17 +59447,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -59304,17 +59471,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -59330,16 +59497,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -59353,10 +59520,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -59369,10 +59536,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -59386,12 +59553,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -59405,12 +59572,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -59425,17 +59592,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -59445,10 +59612,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -59463,12 +59630,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -59482,12 +59649,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -59501,10 +59668,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -59521,12 +59688,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -59540,17 +59707,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -59565,10 +59732,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -59579,12 +59746,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -59598,17 +59765,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -59621,12 +59788,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -59643,14 +59810,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -59664,15 +59831,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -59681,15 +59848,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -59720,14 +59887,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -59746,14 +59913,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -59858,12 +60025,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -59877,10 +60044,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -59894,10 +60061,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -59914,10 +60081,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -59933,36 +60100,36 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
geometryThread
Merge all
- Combina-ho tot
+
Polygon area
-
Polygon perimeter
-
Line length
-
Point x ordinate
-
Point y ordinate
-
@@ -59970,447 +60137,447 @@ Returns a string representation of a color based on its hue, saturation, value a
(1-256)
-
(Optional) column to read labels
-
3D-Viewer (NVIZ)
-
3d Visualization
-
Add a value to the current category values
-
Add elements to layer (ALL elements of the selected layer type!)
-
Add missing centroids to closed boundaries
-
Add one or more columns to attribute table
-
Allocate network
-
Assign constant value to column
-
Assign new constant value to column only if the result of query is TRUE
-
Assign new value as result of operation on columns to column in attribute table
-
Assign new value to column as result of operation on columns only if the result of query is TRUE
-
Attribute field
-
Attribute field (interpolated values)
-
Attribute field to (over)write
-
Attribute field to join
-
Auto-balancing of colors for LANDSAT-TM raster
-
Bicubic or bilinear spline interpolation with Tykhonov regularization
-
Bilinear interpolation utility for raster maps
-
Blend color components for two rasters by given ratio
-
Blend red, green, raster layers to obtain one color raster
-
Break (topologically clean) polygons (imported from non topological format, like ShapeFile). Boundaries are broken on each point shared between 2 and more polygons where angles of segments are different
-
Break lines at each intersection of vector
-
Brovey transform to merge multispectral and high-res panchromatic channels
-
Buffer
-
Build polylines from lines
-
Calculate average of raster within areas with the same category in a user-defined base map
-
Calculate covariance/correlation matrix for user-defined rasters
-
Calculate error matrix and kappa parameter for accuracy assessment of classification result
-
Calculate geometry statistics for vectors
-
Calculate linear regression from two rasters: y = a + b*x
-
Calculate median of raster within areas with the same category in a user-defined base map
-
Calculate mode of raster within areas with the same category in a user-defined base map
-
Calculate optimal index factor table for LANDSAT-TM raster
-
Calculate raster surface area
-
Calculate shadow maps from exact sun position
-
Calculate shadow maps from sun position determinated by date/time
-
Calculate statistics for raster
-
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Category or object oriented statistics
-
Cats
-
Cats (select from the map or using their id)
-
Change category values and labels
-
Change field
-
Change layer number
-
Change resolution
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Change the type of geometry elements
-
Choose appropriate format
-
Columns management
-
Compares bit patterns with raster
-
Compress and decompress raster
-
Compress raster
-
Computes a coordinate transformation based on the control points
-
Concentric circles
-
Connect nodes by shortest route (traveling salesman)
-
Connect selected nodes by shortest tree (Steiner tree)
-
Connect vector to database
-
Convert 2D vector to 3D by sampling raster
-
Convert 2D vector to 3D vector by sampling of elevation raster. Default sampling by nearest neighbour
-
Convert GRASS binary vector to GRASS ASCII vector
-
Convert a raster to vector within GRASS
-
Convert a vector to raster within GRASS
-
Convert bearing and distance measurements to coordinates and vice versa
-
Convert boundaries to lines
-
Convert centroids to points
-
Convert coordinates
-
Convert coordinates from one projection to another (cs2cs frontend)
-
Convert lines to boundaries
-
Convert points to centroids
-
Convert raster to vector areas
-
Convert raster to vector lines
-
Convert raster to vector points
-
Convert vector to raster using attribute values
-
Convert vector to raster using constant
-
Convex hull
-
Copy a table
-
Copy also attribute table (only the table of layer 1 is currently supported)
-
Count of neighbouring points
-
Create 3D volume map based on 2D elevation and value rasters
-
Create a MASK for limiting raster operation
-
Create a map containing concentric rings
-
Create a raster plane
-
Create and/or modify raster support files
-
Create aspect raster from DEM (digital elevation model)
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create grid in current region
-
Create new GRASS location and transfer data into it
-
Create new GRASS location from metadata file
-
Create new GRASS location from raster data
-
Create new GRASS location from vector data
-
Create new layer with category values based upon user's reclassification of categories in existing raster
-
Create new raster by combining other rasters
-
Create new vector by combining other vectors
-
Create new vector with current region extent
-
Create nodes on network
-
Create parallel line to input lines
-
Create points
-
Create points along input lines
-
Create points/segments from input vector lines and positions
-
Create quantization file for floating-point raster
-
Create random 2D/3D vector points
-
Create random cell values with spatial dependence
-
Create random points
-
Create random raster
-
Create random vector point contained in raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create shaded map
-
Create slope raster from DEM (digital elevation model)
-
Create standard vectors
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
DXF vector layer
-
Database
-
Database connection
-
Database file
-
Database management
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Develop map
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector attributes
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
E00 vector layer
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export from GRASS
-
Export raster as non-georeferenced PNG image format
-
Export raster from GRASS
-
Export raster series to MPEG movie
-
Export raster to 8/24bit TIFF image at the resolution of the current region
-
Export raster to GRIDATB.FOR map file (TOPMODEL)
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extract features from vector
-
Extract selected features
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
File management
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Filter image
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Hydrologic modelling
-
Imagery
-
Import ASCII raster
-
Import DXF vector
-
Import ESRI ARC/INFO ASCII GRID
-
Import ESRI E00 vector
-
Import GDAL supported raster
-
Import GDAL supported raster and create a fitted location
-
Import GRIDATB.FOR (TOPMODEL)
-
Import MapGen or MatLab vector
-
Import OGR vector
-
Import OGR vector and create a fitted location
-
Import OGR vectors in a given data source combining them in a GRASS vector
-
Import SPOT VGT NDVI
-
Import SRTM HGT
-
Import US-NGA GEOnet Names Server (GNS) country file
-
Import all OGR/PostGIS vectors in a given data source and create a fitted location
-
Import attribute tables in various formats
-
Import binary MAT-File(v4)
-
Import binary raster
-
Import from database into GRASS
-
Import geonames.org country files
-
Import into GRASS
-
Import loaded raster
-
Import loaded raster and create a fitted location
-
Import loaded vector
-
Import loaded vector and create a fitted location
-
Import only some layers of a DXF vector
-
Import raster from ASCII polygon/line
-
Import raster from coordinates using univariate statistics
-
Import raster into GRASS
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Input table
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage features
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Network analysis
-
Network maintenance
-
Number of rows to be skipped
-
Others
-
Output GML file
-
Output Shapefile
- Shapefile de sortida
+
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster
- Ràster
+
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reports
-
Reports and statistics
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
-
Split lines to shorter segments
-
Statistics
-
Sum raster cell values
-
Surface management
-
Tables management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Terrain analysis
-
Tests of normality on vector points
-
Text file
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform features
-
Transform image
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
-
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector
- Vector
+
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
optionsDialog
Warning!
-
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
@@ -62194,7 +62361,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid CSW connections XML.
-
Loading Connections
@@ -62206,59 +62373,59 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Current Rules
-
Add Rule
-
Rule
-
Layer #1
-
Layer #2
-
Tolerance
- Tolerància
+
Layer1ID
-
Layer2ID
-
No layer
-
Delete Rule
-
@@ -62266,7 +62433,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid second geometry.
-
Topology plugin
-
Invalid first geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
visualThread
Max. len:
-
Min. len:
-
Mean. len:
-
Filled:
-
Empty:
-
N:
-
Mean:
-
StdDev:
-
Sum:
-
Min:
-
Max:
-
CV:
-
Number of unique values:
-
Range:
-
Median:
-
Observed mean distance:
-
Expected mean distance:
-
Nearest neighbour index:
-
Z-Score:
-
@@ -62466,17 +62633,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- Formulari
+
Open number input dialog
-
...
-
@@ -62492,4 +62659,4 @@ Returns a string representation of a color based on its hue, saturation, value a
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_cs.ts b/i18n/qgis_cs.ts
index e44f2898393..82d30a2038f 100644
--- a/i18n/qgis_cs.ts
+++ b/i18n/qgis_cs.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -11,10 +9,6 @@
CharacterWidget
-
- <p>Character: <span style="font-size: 24pt; font-family: %1%2</span><p>Value: 0x%3">
- <p>Znak: <span style="font-size: 24pt; font-family: %1%2</span><p>Value: 0x%3">
-
<p>Character: <span style="font-size: 24pt; font-family: %1">%2</span><p>Value: 0x%3
@@ -29,15 +23,15 @@
Setting
- Nastavení
+
Value
- Hodnota
+
Providers
- Přístup k datům
+
Wrong value
@@ -92,14 +86,6 @@
Coordinate in map canvas coordinate reference system (lat,lon or east,north)
Souřadnice v souřadnicovém systému mapového okna (lat,lon nebo východ,sever)
-
- Coordinate in your selected CRS
- Souřadnice ve vašem vybraném SRS
-
-
- Coordinate in map canvas coordinate reference system
- Souřadnice v souřadnicovém referenčím systému mapové plochy
-
Copy to clipboard
@@ -219,7 +205,7 @@
Knihovna:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> tabulka geometry_columns neexistuje!
Tato tabulka je nezbytná pro mnohé GIS programy pro číslování tabulek.
@@ -429,13 +415,13 @@ Tato tabulka je nezbytná pro mnohé GIS programy pro číslování tabulek.Skripty:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> Verze instalovaných skriptů neodpovídá verzi vydávaných skriptů!
Toto je zřejmě výsledek nesprávné aktualizace PostGISu.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Tento uživatel nemá práva číst obsah tabulky geometry_columns!
Tato tabulka je nepostradatelná pro mnohé GIS programy k očíslování tabulek.
@@ -477,12 +463,12 @@ Tato tabulka je nepostradatelná pro mnohé GIS programy k očíslování tabule
&Tabulka
- Filename:
- Název souboru:
+ "{0}" not found
+ "{0}" nenalezeno
- "{0}" not found
- Filename:
+ Název souboru:
SQLite version:
@@ -655,14 +641,6 @@ Dotaz:
Databases
Databáze
-
- Invalid MIME uri
- Neplatné MIME uri
-
-
- The dropped object is not a valid layer
- Vynechaný objekt není platná vrstva
-
Invalid layer
Neplatná vrstva
@@ -1223,10 +1201,6 @@ sloupce
Dialog
-
- Connect
- Připojit
-
Eliminate sliver polygons
@@ -1264,6 +1238,31 @@ sloupce
Browse
Procházet
+
+ Input vector layer
+ Vstupní vektorová vrstva
+
+
+ Add result to canvas
+ Přidat výsledek do mapového okna
+
Selected features:
@@ -1274,84 +1273,6 @@ sloupce
area
plocha
-
- OGR Converter
- Konvertor OGR
-
-
- Open OGR file
- Otevřít OGR soubor
-
-
- OGR File Data Source (*.*)
- Zdrojová data OGR souboru (*.*)
-
-
- Open Directory
- Otevřít adresář
-
-
- OGR Layer Converter
- Konvertor OGR vrstvy
-
-
- Input OGR dataset is missing!
- Chybí vstupní OGR soubor dat!
-
-
- Input OGR layer name is missing!
- Chybí jméno vstupní OGR vrstvy!
-
-
- Target OGR format not selected!
- Nebyl vybrán cílový OGR formát!
-
-
- Output OGR dataset is missing!
- Chybí výstupní OGR soubor dat!
-
-
- Output OGR layer name is missing!
- Chybí jméno výstupní OGR vrstvy!
-
-
- Choose a file name to save to
- Vyberte název souboru pro uložení
-
-
- fTools About
- O fTools
-
-
- fTools
- fTools
-
-
- Version x.x-xxxxxx
- Verze x.x-xxxxxx
-
-
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html>
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html>
-
-
- Help
- Nápověda
-
-
- Web
- Web
-
-
- Close
- Zavřít
-
Extract Nodes
@@ -1362,11 +1283,24 @@ p, li { white-space: pre-wrap; }
Input line or polygon vector layer
Vstupní čárová nebo polygonová vektorová vrstva
+
+ Unique ID field
+ Pole jedinečného ID
+
Save to new shapefile
Uložit jako nový shapefile
+
+ Output point shapefile
+ Výstupní bodový shapefile
+
Tolerance
@@ -1383,32 +1317,19 @@ p, li { white-space: pre-wrap; }
Vypočítat rozsah pro každý prvek zvlášť
- Unique ID field
- Pole jedinečného ID
-
-
- Output point shapefile
- Výstupní bodový shapefile
+ Use only selected features
+ Použít pouze vybrané prvky
Geoprocessing
Geoprocessing
-
- Input vector layer
- Vstupní vektorová vrstva
-
Intersect layer
@@ -1484,317 +1405,11 @@ p, li { white-space: pre-wrap; }
Output Shapefile
Výstupní shapefile
-
- Join Attributes
- Připojit atributy
-
-
- Target vector layer
- Cílová vektorová vrstva
-
-
- Target join field
- Cílové připojovací pole
-
-
- Join data
- Připojit data
-
-
- Join vector layer
- Připojit vektorovou vrstvu
-
-
- Join dbf table
- Připojit DBF tabulku
-
-
- Join field
- Připojit pole
-
-
- Encoding
- Kódování
-
-
- Output table
- Výstupní tabulka
-
-
- Only keep matching records
- Ponechat pouze odpovídající záznamy
-
-
- Keep all records (including non-matching target records)
- Ponechat všechny záznamy (včetně nesouhlasných cílových záznamů)
-
-
- Keep all records (includeing non-matching target records)
- Ponechat všechny záznamy (včetně neodpovídajících cílových záznamů)
-
Generate Centroids
Vytvořit centroidy
-
- creating new selection
- vytvořením nového výběru
-
-
- adding to current selection
- přidáním do aktuálního výběru
-
-
- removing from current selection
- odstraněním z aktuálního výběru
-
-
- Select by location
- Vybrat podle umístění
-
-
- Select features in:
- Vybrat prvky v:
-
-
- that intersect features in:
- které protínají prvky v:
-
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
-
- Modify current selection by:
- Upravit aktuální výběr:
-
-
- Use selected features only
- Použít pouze vybrané prvky
-
-
- Please specify input layer
- Zadejte prosím vstupní vrstvu
-
-
- Please specify select layer
- Zadejte prosím vrstvu pro výběr
-
-
- Select files to merge
- Vyberte soubory ke sloučení
-
-
- Input files
- Vstupní soubory
-
-
- No output file
- Žádný výstupní soubor
-
-
- Please specify output file.
- Určete prosím výstupní soubor.
-
-
- Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
-
- Simplify results
- Zjednodušit výsledky
-
-
- There were %1 vertices in original dataset which
-were reduced to %2 vertices after simplification
- V původním datasetu bylo %1 vertexů, které
-byly zredukovány na %2 vertexů po zjednodušení
-
-
- Sum line lengths
- Součet délek čar
-
-
- There are no shapefiles with the given geometry type. Please select an available geometry type.
- Nejsou zde žádné shapefile soubory zadaného typu geometrie. Zvolte prosím dostupný typ geometrie.
-
-
- Created output point shapefile:
-%s
-
-Would you like to add the new layer to the TOC?
- Vytvořen výstupní bodový shapefile:
-%s
-
-Chcte přidat novou vrstvu do aktuálního mapového okna?
-
-
- Can't delete file %s
- Nemohu smazat soubor %s
-
-
- Error loading output shapefile:
-%s
- Chyba načítání výstupního shapefile:
-%s
-
-
- Sum Line Lengths In Polyons
- Součet délek čar v polygonech
-
-
- Please specify input polygon vector layer
- Zadejte prosím vstupní polygonovou vektorovou vrstvu
-
-
- Please specify input line vector layer
- Zadejte prosím vstupní liniovou vektorovou vrstvu
-
-
- Please specify output length field
- Zadejte prosím výstupní pole délky
-
-
- Created output shapefile:
-%s
-
-Would you like to add the new layer to the TOC?
- Vytvořen výstupní shapefile:
-%s
-
-Chcete přidat novou vrstvu do aktuálního mapového okna?
-
-
- length field
- pole délky
-
-
- Random selection within subsets
- Náhodný výběr v podmnožinách
-
-
- Please specify input vector layer
- Zadejte prosím vstupní vektorovou vrstvu
-
-
- Please specify an input field
- Zadejte prosím vstupní pole
-
-
- Defined Projection For:
-%s.shp
- Definována projekce pro:
-%s.shp
-
-
- Random Points
- Náhodné body
-
-
- Created output shapefiles in folder:
-%s
- Vytvořeny výstupní shapefile soubory ve složce:
-%s
-
-
- Selected features: %1
- Vybrané prvky: %1
-
-
- Eliminate
- Eliminovat
-
-
- No selection in input layer
- Źádný výběr ve vstupní vrstvě
-
-
- Commit error:
- %1
- Chyba:
- %1
-
-
- Error creating output file
- Chyba při vytváření výstupního souboru
-
-
- Could not delete features
- Nelze smazat prvky
-
-
- Could not replace geometry of feature with id %1
- Nemohu nahradit geometrii prvku s ID %1
-
-
- Could not eliminate features with these ids:
-%1
- Nelze eliminovat prvky s těmito ID:
-%1
-
-
- Could not add features
- Nelze přidat prvky
-
-
- Created output shapefile:
-%1
- Vytvořen výstupní shapefile:
-%1
-
-
- Finished
- Hotovo
-
-
- Processing completed.
- Zpracování dokončeno.
-
-
- unstratified
- nevrstvený
-
-
- stratified
- vrstvený
-
-
- density
- hustota
-
-
- field
- pole
-
-
- Unknown layer type...
- Neznámý typ vrstvy...
-
Weight field
@@ -1811,12 +1426,44 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Směrodat. Odch.
- Regular points
- Pravidelné body
+ Merge shapefiles
+ Sloučit shapefile soubory
- Please properly specify extent coordinates
- Zadejte prosím správně souřadnice rozsahu
+ Select by layers in the folder
+ Vybrat podle vrstev ve složce
+
+
+ Shapefile type
+ Typ shapefile
+
+
+ Polygon
+ Polygon
+
+
+ Line
+ Linie
+
+
+ Point
+ Bod
+
+
+ Input directory
+ Vstupní složka
+
+
+ Add result to map canvas
+ Přidat výsledek do mapového okna
Use only the nearest (k) target points
Použít pouze nejbližší (k) cílové body
-
- Use only the nearest (k) target points:
- Použít pouze nejbližší (k) cílové body:
-
Output distance matrix
Výstupní vzdálenostní matice
-
- Use only selected features
- Použít pouze vybrané prvky
-
-
- Line intersections
- Průsečíky čar
-
-
- Please specify input line layer
- Určete prosím vstupní liniovou vrstvu
-
-
- Please specify output shapefile
- Zadejte prosím výstupní shapefile soubor
-
-
- Please specify line intersect layer
- Určete prosím liniovou protínající se vrstvu
-
-
- Please specify input unique ID field
- Určete prosím vstupní pole s unikátním ID
-
-
- Please specify intersect unique ID field
- Určete prosím pole s unikátním ID protínané vrstvy
-
-
- Created output point shapefile:
-%1
-
-Would you like to add the new layer to the TOC?
- Vytvořen výstupní bodový shapefile:
-%1
-
-Chcte přidat novou vrstvu do aktuálního mapového okna?
-
-
- No output will be created.
-Following field names are longer than 10 characters:
-%1
- Žádný výstup nebude vytvořen.
-Následující názvy polí jsou delší než 10 znaků:
-%1
-
-
- Export to new projection
- Exportovat do nové projekce
-
-
- No input layer specified
- Vstupní vrstva nebyla určena
-
-
- Define current projection
- Definovat aktuální projekci
-
-
- Please specify spatial reference system
- Zadejte prosím prostorový referenční systém
-
-
- Created projected shapefile:
-%1
-
-Would you like to add the new layer to the TOC?
- Vytvořen shapefile v nové projekci:
-%1
-
-Chcte přidat novou vrstvu do aktuálního mapového okna?
-
-
- Choose output CRS:
- Vyberte cílový SRS:
-
-
- Please select the projection system to be used by the output layer.
- Vyberte prosím systém projekce pro výstupní vrstvu.
-
-
- Output layer will be projected from it's current CRS to the output CRS.
- Výstupní vrstva bude promítnuta z jejího aktuálního SRS do výstupního SRS.
-
-
- No Valid CRS selected
- Nebyl vybrán platný SRS
-
-
- Output spatial reference system is not valid
- Výstupní prostorový refereční systém je neplatný
-
-
- Identical output spatial reference system chosen
- Zvolen stejný výstupní prostorový referenční systém
-
-
- Join attributes
- Připojit atributy
-
-
- Please specify target vector layer
- Určete prosím cílovou vektorovou vrstvu
-
-
- Please specify join vector layer
- Určete prosím připojovanou vektorovou vrstvu
-
-
- Please specify target join field
- Určete prosím cílové připojovací pole
-
-
- Please specify join field
- Určete prosím připojovací pole
-
-
- Please specify input table
- Určete prosím vstupní tabulku
-
-
- Created output shapefile:
-%1
-
-Would you like to add the new layer to the TOC?
- Vytvořen výstupní shapefile:
-%1
-
-Chcete přidat novou vrstvu do aktuálního mapového okna?
-
-
- Join Table
- Připojit tabulku
-
-
- Input table does not exist
- Vstupní tabulka neexistuje
-
-
- joined fields
- připojená pole
-
-
- Mean coordinates
- Průměrné souřadnice
-
-
- Standard distance
- Standardní vzdálenost
-
-
- (Optional) Weight field
- (volitelné) Pole váhy
-
-
- (Optional) Unique ID field
- (volitelné) Pole unikátního ID
-
-
- Coordinate statistics
- Souřadnicové statistiky
-
-
- No input vector layer specified
- Vstupní vrstva nebyla určena
-
-
- Selected features: %s
- Vybrané prvky: %s
-
-
- Commit error:
-%s
- Chyba commit:
-%s
-
-
- Could not replace geometry of feature with id %s
- Nemohu nahradit geometrii prvku s ID %s
-
-
- Could not eliminate features with these ids:
-%s
- Nelze eliminovat prvky s těmito ID:
-%s
-
-
- Created output shapefile:
-%s
- Vytvořen výstupní shapefile:
-%s
-
-
- There were %d vertices in original dataset which
-were reduced to %d vertices after simplification
- V původním datasetu bylo %d vertexů, které
-byly zredukovány na %d vertexů po zjednodušení
-
-
- Processing of the following layers/files ended with error:<br><br>
- Zpracování následujících vrstev/souborů skončilo s chybou:<br><br>
-
-
- Join attributes by location
- Připojit atributy podle umístění
-
-
- Please specify at least one summary statistic
- Prosím určete alespoň jednu souhrnnnou statistiku
-
-
- CRS warning!
- Upozornění SRS!
-
-
- Warning: Input layers have non-matching CRS.
-This may cause unexpected results.
- Varování: Vstupní vrstvy mají nesouhlasný SRS.
-To může způsobit neočekávané výsledky.
-
-
- Summary field
- Pole souhrnu
-
-
- No output will be created.
-Following field names are longer than 10 characters:
-%s
- Žádný výstup nebude vytvořen.
-Následující názvy polí jsou delší než 10 znaků:
-%s
-
-
- Can't delete existing shapefile
-%s
- Nemohu smazat existující shapefile
-%s
-
-
- Vector grid
- Vektorový grid
-
-
- Please specify valid extent coordinates
- Určete prosím platné souřadnice rozsahu
-
-
- Invalid extent coordinates entered
- Zadány neplatné souřadnice rozsahu
-
-
- Generate Vector Grid
- Vytvořit vektorový grid
-
Count Points In Polygons
@@ -2169,10 +1552,6 @@ Následující názvy polí jsou delší než 10 znaků:
Input Boundary Layer
Vstupní hraniční vrstva
-
- Minimum distance between points
- Minimální vzdálenost mezi body
-
Sample Size
@@ -2205,134 +1584,11 @@ Následující názvy polí jsou delší než 10 znaků:
Use value from input field
Použít hodnotu ze vstupního pole
-
- No input shapefile specified
- Nebyl určen žádný vstupní shapefile
-
-
- Cannot define projection for PostGIS data...yet!
- Nemohu zatím ještě definovat projekci PostGIS dat!
-
-
- Defined Projection For:
-%1.shp
- Definována projekce pro:
-%1.shp
-
-
- Please select the projection system that defines the current layer.
- Zvolte prosím systém projekce který definuje aktuální vrstvu.
-
-
- Layer CRS information will be updated to the selected CRS.
- Informace vrstvy o SRS bude aktualizována na vybraný SRS.
-
-
- Split vector layer
- Rozdělit vektorovou vrstvu
-
-
- Created output shapefiles in folder:
-%1
- Vytvořeny výstupní shapefile soubory ve složce:
-%1
-
-
- Random selection
- Náhodný výběr
-
Random Selection Tool
Nástroj náhodného výběru
-
- Count Points in Polygon
- Spočítat body v polygonu
-
-
- Count Points In Polygon
- Spočítat body v polygonu
-
-
- Please specify input point vector layer
- Určete prosím vstupní bodovou vektorovou vrstvu
-
-
- Please specify output count field
- Určete prosím výstupní pole součtu
-
-
- Please select a raster layer
- Prosím zvokte rastrovou vrstvu
-
-
- Unable to compute extents aligned on selected raster layer
- Nemohu vypočítat rozsahy zarovnané na vybrané vrstvy
-
-
- Densify geometries
- Zhustit geometrie
-
-
- Vertices to add
- Uzly k přidání
-
-
- Warning
- Upozornění
-
-
- Please specify an input layer
- Zadejte prosím vstupní vrstvu
-
-
- Currently QGIS doesn't allow simultaneous access from
- different threads to the same datasource. Make sure your layer's
- attribute tables are closed. Continue?
- QGIS momentálně nedovoluje současný přístup z
- různých vláken ke stejnému datovému zdroji. Ujistěte se, že atributové tabulky
- vaší vrstvy jsou uzavřené. Pokračovat?
-
-
- Error
- Chyba
-
-
- Distance matrix
- Vzdálenostní matice
-
-
- Create Point Distance Matrix
- Vytvořit vzdálenostní matici bodů
-
-
- Please specify input point layer
- Určete prosím vstupní bodovou vrstvu
-
-
- Please specify output file
- Určete prosím výstupní soubor
-
-
- Please specify target point layer
- Určete prosím cílovou bodovou vrstvu
-
-
- Please specify target unique ID field
- Určete prosím cílové pole unikátního ID
-
-
- Created output matrix:
-
- Vytvořena výstupní matice:
-
-
- Error loading output shapefile:
-%1
- Chyba načítání výstupního shapefile:
-%1
-
Input Vector Layer
Vstupní vektorová vrstva
-
- Unable to read input table!
- Nemohu přečíst vstupní tabulku!
-
Import spatial reference system
Načíst souřadnicový referenční systém
-
- Import spatial reference system:
- Načíst souřadnicový referenční systém:
-
Generate Regular Points
@@ -2466,41 +1714,91 @@ Následující názvy polí jsou delší než 10 znaků:
Initial inset from corner (LH side)
Počáteční vsazení od levého rohu
+
+ Simplify geometries
+ Zjednodušit geometrie
+
+
+ Input line or polygon layer
+ Vstupní liniová nebo polygonová vrstva
+
+
+ Simplify tolerance
+ Tolerance zjednodušení
+
+
+ Save to new file
+ Uložit do nového souboru
+
+
+ Build spatial index
+ Vytvořit prostorový index
+
+
+ Select files from disk
+ Vyberte soubory z disku
+
+
+ Select files...
+ Vyberte soubory...
+
+
+ Select all
+ Vybrat vše
+
+
+ Select none
+ Nevybrat nic
+
+
+ Clear list
+ Vyčistit seznam
+
Spatial Join
Prostorové propojení
+
+ Target vector layer
+ Cílová vektorová vrstva
+
+
+ Join vector layer
+ Připojit vektorovou vrstvu
+
Attribute Summary
Souhrn atributů
- Take attributes of first located feature
- Vzít atributy prvního lokalizovaného prvku
+ Mean
+ Průměr
Take summary of intersecting features
Vzít atributy protínajících se prvků
-
- Mean
- Průměr
-
Min
Min
-
- Max
- Max
-
Sum
@@ -2512,8 +1810,29 @@ Následující názvy polí jsou delší než 10 znaků:
Medián
- Output Shapefile:
- Výstupní shapefile:
+ Max
+ Max
+
+
+ Take attributes of first located feature
+ Vzít atributy prvního lokalizovaného prvku
+
+
+ Output table
+ Výstupní tabulka
+
+
+ Only keep matching records
+ Ponechat pouze odpovídající záznamy
+
+
+ Keep all records (including non-matching target records)
+ Ponechat všechny záznamy (včetně nesouhlasných cílových záznamů)
Input line vector layer
Vstupní liniová vektorová vrstva
+
+ Generate Vector Grid
+ Vytvořit vektorový grid
+
Grid extent
@@ -2631,157 +1955,338 @@ Následující názvy polí jsou delší než 10 znaků:
Uložit chyby umístění
- Could not establish connection to: '%1'
- Nemohu se připojit k: '%1'
+ Press Ctrl+C to copy results to the clipboard
+ Stiskněte Ctrl+C pro zkopírování výsledků do schránky
- Successfully translated layer '%1'
- Úspěšně přeložena vrstva '%1'
+ Vector grid
+ Vektorový grid
- Failed to translate layer '%1'
- Nezdařilo se přeložení vrstvy '%1'
+ Please select a raster layer
+ Prosím zvokte rastrovou vrstvu
- Successfully connected to: '%1'
- Úspěšně připojen k: '%1'
+ Unable to compute extents aligned on selected raster layer
+ Nemohu vypočítat rozsahy zarovnané na vybrané vrstvy
-
-The goal of fTools is to provide a one-stop resource for many common vector-based GIS tasks, without the need for additional software, libraries, or complex workarounds.
-
-fTools is designed to extend the functionality of Quantum GIS using only core QGIS and python libraries. It provides a growing suite of spatial data management and analysis functions that are both quick and functional. In addition, the geoprocessing functions of Dr. Horst Duester and Stefan Ziegler have been incorporated to further facilitate and streamline GIS based research and analysis.
-
-If you would like to report a bug, make suggestions for improving fTools, or have a question about the tools, please email me: carson.farmer@gmail.com
-
-LICENSING INFORMATION:
-fTools is copyright (C) 2009 Carson J.Q. Farmer
-Geoprocessing functions adapted from 'Geoprocessing Plugin',
-(C) 2008 by Dr. Horst Duester, Stefan Ziegler
-
-licensed under the terms of GNU GPL 2
-This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
-This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-fTools DEVELOPERS:
-Carson J. Q. Farmer
-Alexander Bruy
-**If you have contributed code to fTools and I haven't mentioned your name here, please contact me and I will add your name.
-
-ACKNOWLEDGEMENTS:
-The following individuals (whether they know it or not) have contributed ideas, help, testing, code, and guidence towards this project, and I thank them.
-Hawthorn Beyer
-Borys Jurgiel
-Tim Sutton
-Barry Rowlingson
-Horst Duester and Stefan Ziegler
-Paolo Cavallini
-Aaron Racicot
-Colin Robertson
-Agustin Lobo
-Jurgen E. Fischer
-QGis developer and user communities
-Folks on #qgis at freenode.net
-All those who have reported bugs/fixes/suggestions/comments/etc.
-
-
-Cílem fTools je poskytnout zdroj pro mnoho úloh týkajících se vektorových dat, bez potřeby dalšího dodatečného software, knihoven nebo komplexních postupů.
-
-fTools je vyvíjen tak, aby rozšířil funkcionalitu Quantum GISu za použití pouze jádra QGISu a python knihoven. Poskytuje rostoucí sadu nástrojů pro práci s prostorovými daty a jejich ananlýzu, které jsou rychlé a zároveň i funkční .Navíc byly do fTools přidány i nástroje geoprocessingu od Dr. Horsta Duestera a Stefana Zieglera, aby tak rozšířily a usnadnily výzkum a analýzu na bázi GISu.
-
-Pokud chcete nahlásit chybu, nebo máte nějaké návrhy a připomínky k vylepšení fTools, nebo máte otázku týkající se fTools, napiště mi prosím email na adresu: carson.farmer@gmail.com
-
-LICENČNÍ INFORMACE:
-fTools is copyright (C) 2009 Carson J.Q. Farmer
-Funkce geoprocessingu převzaty z 'Geoprocessing Plugin',
-(C) 2008 by Dr. Horst Duester, Stefan Ziegler
-
-licencováno v rámci podmínek GNU GPL 2
-Tento program je svobodný software: můžete ho redistribuovat a/nebo provádět jeho úpravy v rámci licenčních podmínek GNU General Public License, ve znění, jak byla publikována organizací Free Software Foundation, buď verze 2 této licence nebo dle vaší volby jakékoliv pozdější verze.
-Tento program je distribuován v naději, že bude užitečný, nicméně BEZ JAKÉKOLIV ZÁRUKY; bez implikované záruky OBCHODOVATELNOSTI nebo VHODNOSTI PRO SPECIÁLNÍ ÚČELY. Pročtěte si text GNU General Public License, pokud potřebujete vědět více.
-Měli jste obdržet kopii GNU General Public License spolu s tímto programem. Pokud se tak nestalo, napište si na Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-fTools VÝVOJÁŘI:
-Carson J. Q. Farmer
-Alexander Bruy
-**If you have contributed code to fTools and I haven't mentioned your name here, please contact me and I will add your name.
-
-PODĚKOVÁNÍ:
-Následující jedinci (ať už o tom ví, či nikoliv) poskytli nápady, pomoc, testování, kód a rady pro tento projekt a já jim za to děkuji.
-Hawthorn Beyer
-Borys Jurgiel
-Tim Sutton
-Barry Rowlingson
-Horst Duester and Stefan Ziegler
-Paolo Cavallini
-Aaron Racicot
-Colin Robertson
-Agustin Lobo
-Jurgen E. Fischer
-Komunity vývojářů a uživatelů QGisu
-Lidi na #qgis at freenode.net
-Všichni, kdo poskytli nahlášení chyb/opravy/návrhy/komentáře/atd.
-
+ Please specify valid extent coordinates
+ Určete prosím platné souřadnice rozsahu
- Incorrect field names
- Nesprávné názvy polí
+ Please specify output shapefile
+ Zadejte prosím výstupní shapefile soubor
+
+
+ Invalid extent coordinates entered
+ Zadány neplatné souřadnice rozsahu
+
+
+ Random selection
+ Náhodný výběr
+
+
+ No input shapefile specified
+ Nebyl určen žádný vstupní shapefile
+
+
+ Regular points
+ Pravidelné body
+
+
+ Please specify input layer
+ Zadejte prosím vstupní vrstvu
+
+
+ Please properly specify extent coordinates
+ Zadejte prosím správně souřadnice rozsahu
+
+
+ Mean coordinates
+ Průměrné souřadnice
+
+
+ Standard distance
+ Standardní vzdálenost
+
+
+ (Optional) Weight field
+ (volitelné) Pole váhy
+
+
+ (Optional) Unique ID field
+ (volitelné) Pole unikátního ID
+
+
+ Coordinate statistics
+ Souřadnicové statistiky
+
+
+ No input vector layer specified
+ Vstupní vrstva nebyla určena
+
+
+ There were %d vertices in original dataset which
+were reduced to %d vertices after simplification
+ V původním datasetu bylo %d vertexů, které
+byly zredukovány na %d vertexů po zjednodušení
+
+
+ Processing of the following layers/files ended with error:<br><br>
+ Zpracování následujících vrstev/souborů skončilo s chybou:<br><br>
+
+
+ Join attributes by location
+ Připojit atributy podle umístění
+
+
+ Please specify target vector layer
+ Určete prosím cílovou vektorovou vrstvu
+
+
+ Please specify join vector layer
+ Určete prosím připojovanou vektorovou vrstvu
+
+
+ Please specify at least one summary statistic
+ Prosím určete alespoň jednu souhrnnnou statistiku
+
+
+ CRS warning!
+ Upozornění SRS!
+
+
+ Warning: Input layers have non-matching CRS.
+This may cause unexpected results.
+ Varování: Vstupní vrstvy mají nesouhlasný SRS.
+To může způsobit neočekávané výsledky.
+
+
+ Summary field
+ Pole souhrnu
Error deleting shapefile
Chyba mazání shapefile
- Can't delete existing shapefile
-%1
- Nemohu smazat existující shapefile
-%1
+ Sum line lengths
+ Součet délek čar
- Press Ctrl+C to copy results to the clipboard
- Stiskněte Ctrl+C pro zkopírování výsledků do schránky
+ Sum Line Lengths In Polyons
+ Součet délek čar v polygonech
- Merge shapefiles
- Sloučit shapefile soubory
+ Please specify input polygon vector layer
+ Zadejte prosím vstupní polygonovou vektorovou vrstvu
- Select by layers in the folder
- Vybrat podle vrstev ve složce
+ Please specify input line vector layer
+ Zadejte prosím vstupní liniovou vektorovou vrstvu
- Shapefile type
- Typ shapefile
+ Please specify output length field
+ Zadejte prosím výstupní pole délky
- Polygon
- Polygon
+ length field
+ pole délky
- Line
- Linie
+ Can't delete existing shapefile
+%s
+ Nemohu smazat existující shapefile
+%s
- Point
- Bod
+ Split vector layer
+ Rozdělit vektorovou vrstvu
- Input directory
- Vstupní složka
+ Cancel
+ Storno
- Add result to map canvas
- Přidat výsledek do mapového okna
+ Close
+ Zavřít
+
+
+ Count Points in Polygon
+ Spočítat body v polygonu
+
+
+ Count Points In Polygon
+ Spočítat body v polygonu
+
+
+ Please specify input point vector layer
+ Určete prosím vstupní bodovou vektorovou vrstvu
+
+
+ Please specify output count field
+ Určete prosím výstupní pole součtu
+
+
+ Random selection within subsets
+ Náhodný výběr v podmnožinách
+
+
+ Can't delete file %s
+ Nemohu smazat soubor %s
+
+
+ Error loading output shapefile:
+%s
+ Chyba načítání výstupního shapefile:
+%s
+
+
+ Created output shapefile:
+%s
+
+Would you like to add the new layer to the TOC?
+ Vytvořen výstupní shapefile:
+%s
+
+Chcete přidat novou vrstvu do aktuálního mapového okna?
+
+
+ Please specify input vector layer
+ Zadejte prosím vstupní vektorovou vrstvu
+
+
+ Please specify an input field
+ Zadejte prosím vstupní pole
+
+
+ Defined Projection For:
+%s.shp
+ Definována projekce pro:
+%s.shp
+
+
+ Random Points
+ Náhodné body
+
+
+ No input layer specified
+ Vstupní vrstva nebyla určena
+
+
+ unstratified
+ nevrstvený
+
+
+ stratified
+ vrstvený
+
+
+ density
+ hustota
+
+
+ field
+ pole
+
+
+ Unknown layer type...
+ Neznámý typ vrstvy...
+
+
+ Selected features: %s
+ Vybrané prvky: %s
+
+
+ Commit error:
+%s
+ Chyba commit:
+%s
+
+
+ Could not replace geometry of feature with id %s
+ Nemohu nahradit geometrii prvku s ID %s
+
+
+ Could not eliminate features with these ids:
+%s
+ Nelze eliminovat prvky s těmito ID:
+%s
+
+
+ Created output shapefile:
+%s
+ Vytvořen výstupní shapefile:
+%s
+
+
+ Line intersections
+ Průsečíky čar
+
+
+ Please specify input line layer
+ Určete prosím vstupní liniovou vrstvu
+
+
+ Please specify line intersect layer
+ Určete prosím liniovou protínající se vrstvu
+
+
+ Created output shapefiles in folder:
+%s
+ Vytvořeny výstupní shapefile soubory ve složce:
+%s
+
+
+ Please specify input unique ID field
+ Určete prosím vstupní pole s unikátním ID
+
+
+ Please specify intersect unique ID field
+ Určete prosím pole s unikátním ID protínané vrstvy
+
+
+ Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
+ QGIS zatím neumožňuje simultánní přístup ke stejnému zdroji dat z různých vláken. Ujistěte se že atributová tabulka vaší vrstvy je zavřena. Pokračovat?
+
+
+ Distance matrix
+ Vzdálenostní matice
+
+
+ Create Point Distance Matrix
+ Vytvořit vzdálenostní matici bodů
+
+
+ Please specify input point layer
+ Určete prosím vstupní bodovou vrstvu
+
+
+ Please specify output file
+ Určete prosím výstupní soubor
+
+
+ Please specify target point layer
+ Určete prosím cílovou bodovou vrstvu
+
+
+ Please specify target unique ID field
+ Určete prosím cílové pole unikátního ID
+
+
+ Created output matrix:
+
+ Vytvořena výstupní matice:
+
+
+ Finished
+ Hotovo
+
+
+ Processing completed.
+ Zpracování dokončeno.
Select directory with shapefiles to merge
@@ -2795,26 +2300,46 @@ Všichni, kdo poskytli nahlášení chyb/opravy/návrhy/komentáře/atd.
There are no shapefiles in this directory. Please select another one.
V této složce nejsou žádné shapefile soubory. Zvolte prosím jinou.
+
+ Input files
+ Vstupní soubory
+
+
+ No output file
+ Žádný výstupní soubor
+
+
+ Please specify output file.
+ Určete prosím výstupní soubor.
+
+
+ There are no shapefiles with the given geometry type. Please select an available geometry type.
+ Nejsou zde žádné shapefile soubory zadaného typu geometrie. Zvolte prosím dostupný typ geometrie.
+
Delete error
Chyba smazání
-
- Can't delete file %1
- Nemohu smazat soubor %1
-
-
- Cancel
- Storno
-
Merging
Slučuji
+
+ Define current projection
+ Definovat aktuální projekci
+
Missing or invalid CRS
Chybný nebo neplatný SRS
+
+ Please specify spatial reference system
+ Zadejte prosím prostorový referenční systém
+
+
+ Cannot define projection for PostGIS data...yet!
+ Nemohu zatím ještě definovat projekci PostGIS dat!
+
Identical output spatial reference system chosen
@@ -2824,141 +2349,108 @@ Are you sure you want to proceed?
Opravdu chcete pokračovat?
- Simplify geometries
- Zjednodušit geometrie
+ Output spatial reference system is not valid
+ Výstupní prostorový refereční systém je neplatný
- Input line or polygon layer
- Vstupní liniová nebo polygonová vrstva
+ Please select the projection system that defines the current layer.
+ Zvolte prosím systém projekce který definuje aktuální vrstvu.
- Simplify tolerance
- Tolerance zjednodušení
+ Layer CRS information will be updated to the selected CRS.
+ Informace vrstvy o SRS bude aktualizována na vybraný SRS.
- Save to new file
- Uložit do nového souboru
+ Export to new projection
+ Exportovat do nové projekce
- Add result to canvas
- Přidat výsledek do mapového okna
+ No Valid CRS selected
+ Nebyl vybrán platný SRS
- Build spatial index
- Vytvořit prostorový index
+ Densify geometries
+ Zhustit geometrie
- Select files from disk
- Vyberte soubory z disku
+ Vertices to add
+ Uzly k přidání
- Select files...
- Vyberte soubory...
+ Warning
+ Upozornění
- Select all
- Vybrat vše
+ Please specify an input layer
+ Zadejte prosím vstupní vrstvu
- Select none
- Nevybrat nic
+ Simplify results
+ Zjednodušit výsledky
- Clear list
- Vyčistit seznam
-
-
-
- DlgAbout
-
- Dialog
- Dialog
+ Error
+ Chyba
- about:blank
- about:blank
+ creating new selection
+ vytvořením nového výběru
+
+
+ adding to current selection
+ přidáním do aktuálního výběru
+
+
+ removing from current selection
+ odstraněním z aktuálního výběru
+
+
+ Select by location
+ Vybrat podle umístění
+
+
+ Select features in:
+ Vybrat prvky v:
+
+
+ that intersect features in:
+ které protínají prvky v:
+
+
+ Modify current selection by:
+ Upravit aktuální výběr:
+
+
+ Use selected features only
+ Použít pouze vybrané prvky
+
+
+ Please specify select layer
+ Zadejte prosím vrstvu pro výběr
+
+
+ Eliminate
+ Eliminovat
+
+
+ No selection in input layer
+ Źádný výběr ve vstupní vrstvě
+
+
+ Error creating output file
+ Chyba při vytváření výstupního souboru
+
+
+ Could not delete features
+ Nelze smazat prvky
+
+
+ Could not add features
+ Nelze přidat prvky
DlgAddGeometryColumn
-
- Dialog
- Dialog
-
-
- Name
- Název
-
-
- geom
- geom
-
-
- Type
- Typ
-
-
- POINT
- BOD
-
-
- LINESTRING
- LINESTRING
-
-
- POLYGON
- POLYGON
-
-
- MULTIPOINT
- MULTIBOD
-
-
- MULTILINESTRING
- MULTILINESTRING
-
-
- MULTIPOLYGON
- MULTIPOLYGON
-
-
- GEOMETRYCOLLECTION
- GEOMETRYCOLLECTION
-
-
- Dimensions
- Rozměry
-
-
- SRID
- SRID
-
-
- -1
- -1
-
Sorry
Promiňte
@@ -2973,92 +2465,49 @@ Opravdu chcete pokračovat?
Autofill settings
- Nastavení automatické výplně
Autofill mode
- Režim automatické výplně
Do not autofill
- Nepoužít automatickou výplň
Fill with numbers
- Vyplnit čísly
Fill with parameter values
- Vyplnit hodnotami parametru
Parameter to use
- Parametr pro použití
DlgConfig
-
- SEXTANTE options
- Možnosti SEXTANTE
-
Processing options
- Možnosti zpracování
Enter setting name to filter list
Zadejte název nastavení do seznamu filtrů
-
- Setting
- Nastavení
-
-
- Value
- Hodnota
-
-
-
- DlgCreateConstraint
-
- Add constraint
- Přidat omezení
-
-
- Column
- Sloupec
-
-
- Primary key
- Primární klíč
-
-
- Unique
- Unikátní
-
DlgCreateIndex
-
- Create index
- Vytvořit index
-
-
- Column
- Sloupec
-
-
- Name
- Název
-
Error
Chyba
@@ -3070,90 +2519,6 @@ Opravdu chcete pokračovat?
DlgCreateTable
-
- Create Table
- Vytvořit tabulku
-
-
- Schema
- Schéma
-
-
- Name
- Název
-
-
- Add field
- Přidat pole
-
-
- Delete field
- Odstranit pole
-
-
- Up
- Nahoru
-
-
- Down
- Dolů
-
-
- Primary key
- Primární klíč
-
-
- Create geometry column
- Vytvořit sloupec geometrie
-
-
- POINT
- BOD
-
-
- LINESTRING
- LINESTRING
-
-
- POLYGON
- POLYGON
-
-
- MULTIPOINT
- MULTIBOD
-
-
- MULTILINESTRING
- MULTILINESTRING
-
-
- MULTIPOLYGON
- MULTIPOLYGON
-
-
- GEOMETRYCOLLECTION
- GEOMETRYCOLLECTION
-
-
- geom
- geom
-
-
- Dimensions
- Rozměry
-
-
- SRID
- SRID
-
-
- -1
- -1
-
-
- Create spatial index
- Vytvořit prostorový index
-
&Create
&Vytvořit
@@ -3203,25 +2568,6 @@ Opravdu chcete pokračovat?
vše proběhlo v pořádku
-
- DlgDbError
-
- Database Error
- Chyba databáze
-
-
- An error occured:
- Vyskytla se chyba:
-
-
- An error occured when executing a query:
- Nastala chyba při spouštění dotazu:
-
-
- Query:
- Dotaz:
-
-
DlgExportVector
@@ -3261,30 +2607,6 @@ Opravdu chcete pokračovat?
DlgFieldProperties
-
- Field properties
- Vlastnosti pole
-
-
- Name
- Název
-
-
- Type
- Typ
-
-
- Can be NULL
- Může být NULL
-
-
- Default value
- Výchozí hodnota
-
-
- Length
- Délka
-
Sorry
Promiňte
@@ -3303,12 +2625,12 @@ Opravdu chcete pokračovat?
Get scripts and models
- Získat skripty a modely
about:blank
- about:blank
+ about:blank
@@ -3344,66 +2666,6 @@ Opravdu chcete pokračovat?
DlgImportVector
-
- Import vector layer
- Importovat vektorovou vrstvu
-
-
- Schema:
- Schéma:
-
-
- Table:
- Tabulka:
-
-
- Action
- Akce
-
-
- Create new table
- Vytvořit novou tabulku
-
-
- Drop existing one
- Zahodit existující
-
-
- Append data into table
- Připojit data k tabulce
-
-
- Options
- Možnosti
-
-
- Primary key:
- Primární klíč:
-
-
- Geometry column:
- Sloupec s geometrií:
-
-
- Source SRID:
- Zdrojový SRID:
-
-
- Target SRID:
- Cílový SRID:
-
-
- Encoding:
- Kódování:
-
-
- Create single-part geometries instead of multi-part
- Vytvořit jednodílné geometrie místo vícedílných
-
-
- Create spatial index
- Vytvořit prostorový index
-
Choose the file to import
Vyberte soubor k načtení
@@ -3441,19 +2703,15 @@ Opravdu chcete pokračovat?
DlgModeler
-
- SEXTANTE modeler
- SEXTANTE modeler
-
Processing modeler
- Modelář zpracování
Open model
- Otevřít model
...
- ...
+ ...
Save
- Uložit
+ Uložit
Save as...
- Uložit jako...
+ Uložit jako...
Export as image
- Exportovat jako obrázek
+ Exportovat jako obrázek
Edit model help
- Upravit nápovědu modelu
+ Upravit nápovědu modelu
Run model
- Spustit model
Multiple selection
- Vícenásobný výběr
@@ -3529,17 +2787,17 @@ Opravdu chcete pokračovat?
Enter number or expression
- Zadejte číslo nebo vzorec
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
- <html><head/><body><p>Zadejte vzorec do textového pole. Dvojklikem na prvky ve stromu přidáte jejich hodnoty do vzorce.</p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
- <html><head/><body><p><span style=" font-weight:600;">Varování</span>: pokud je výsledkem vzorce desetinné číslo, ale je požadováno celé číslo, bude výsledek zaokrouhlen na celé číslo.</p></body></html>
@@ -3547,17 +2805,17 @@ Opravdu chcete pokračovat?
Dialog
- Dialog
+ Dialog
Output
- Výstup
+ Výstup
Style
- Styl
+ Styl
@@ -3578,12 +2836,12 @@ Opravdu chcete pokračovat?
Script editor
- Editor skriptů
Save
- Uložit
+ Uložit
...
- ...
+ ...
Save as...
- Uložit jako...
+ Uložit jako...
Edit script help
- Upravit nápovědu skriptu
Run algorithm
- Spustit algoritmus
Cut
- Vyjmout
+ Vyjmout
Copy
- Kopírovat
+ Kopírovat
Paste
- Vložit
+ Vložit
Undo
- Zpět
+ Zpět
Redo
- Znovu
+ Znovu
DlgSqlWindow
-
- SQL window
- SQL okno
-
-
- SQL query:
- SQL dotaz:
-
-
- &Execute (F5)
- &Spustit (F5)
-
-
- F5
- F5
-
-
- &Clear
- &Vyčistit
-
-
- Result:
- Výsledek:
-
-
- Load as new layer
- Načíst jako novou vrstvu
-
-
- Column with unique
-integer values
- Sloupec s unikátními
-celočíselnými hodnotami
-
-
- Geometry column
- Sloupec s geometrií
-
-
- Retrieve
-columns
- Obdržet
-sloupce
-
-
- Layer name (prefix)
- Název vrstvy (předpona)
-
-
- Type
- Typ
-
-
- Vector
- Vektor
-
-
- Raster
- Rastr
-
-
- Load now!
- Načíst nyní!
-
%d rows, %.1f seconds
%d řádků, %.1f sekund
@@ -3720,119 +2914,8 @@ geometry column - column with unique integer values
sloupec geometrie - sloupec s unikátními celočíselnými hodnotami
-
- DlgSymbolV2Properties
-
- Symbol properties
- Vlastnosti symbolu
-
-
- Symbol layer properties
- Vlastnosti vrstvy symbolů
-
-
- This symbol layer doesn't have GUI for settings.
- Tato vrstva symbolů nemá grafické rozhraní pro nastavení.
-
-
- Symbol preview
- Náhled symbolu
-
-
- Symbol layer type
- Typ vrstvy symbolů
-
-
- Symbol layers
- Vrstvy symbolů
-
-
- Add symbol layer
- Přidat vrstvu symbolů
-
-
- Remove symbol layer
- Odstranit vrstvu symbolů
-
-
- Lock layer's color
- Zamknout barvu vrstvy
-
-
- Move up
- Posunout nahoru
-
-
- Move down
- Posunout dolů
-
-
DlgTableProperties
-
- Table properties
- Vlastnosti tabulky
-
-
- Columns
- Sloupce
-
-
- Table columns:
- Sloupce tabulky:
-
-
- Add column
- Přidat sloupec
-
-
- Add geometry column
- Přidat sloupec geometrie
-
-
- Edit column
- Upravit sloupec
-
-
- Delete column
- Smazat sloupec
-
-
- Constraints
- Omezení
-
-
- Primary, foreign keys, unique and check constraints:
- Primární, cizí klíče, unikátní a zkontrolovat omezení:
-
-
- Add primary key / unique
- Přidat primární klíč / unikátní
-
-
- Delete constraint
- Smazat omezení
-
-
- Indexes
- Indexy
-
-
- Indexes defined for this table:
- Indexy definované pro tuto tabulku:
-
-
- Add index
- Přidat index
-
-
- Add spatial index
- Přidat prostorový index
-
-
- Delete index
- Smazat index
-
Sorry
Promiňte
@@ -3855,8 +2938,7 @@ sloupec geometrie - sloupec s unikátními celočíselnými hodnotami
The selected table has no geometry
- Vybraná tabulka nemá geometrii
-
Create?
@@ -3943,137 +3025,115 @@ sloupec geometrie - sloupec s unikátními celočíselnými hodnotamiSQL ke spuštění:
-
- EditRScriptDialog
-
- I/O error
- Chyba vstupu/výstupu
-
-
- Unable to save edits. Reason:
- %1
- Nemohu uložit změny. Důvod:
- %1
-
-
-
- EditScriptDialog
-
- I/O error
- Chyba vstupu/výstupu
-
-
- Unable to save edits. Reason:
- %1
- Nemohu uložit změny. Důvod:
- %1
-
-
FieldsCalculator
Field calculator
- Kalkulačka polí
+ Kalkulačka polí
Create a new field
- Vytvořit nové pole
+ Vytvořit nové pole
Output field name
- Název výstupního pole
+ Název výstupního pole
Output field type
- Typ výstupního pole
+ Typ výstupního pole
Output field width
- Šířka výstupního pole
+ Šířka výstupního pole
Width of complete output. For example 123,456 means 6 as field width.
- Šířka celkového výstupu. Např. 123,456 znamená 6 coby šířku pole.
+ Šířka celkového výstupu. Např. 123,456 znamená 6 coby šířku pole.
Precision
- Přesnost
+ Přesnost
Input layer
- Vstupní vrstva
+ Vstupní vrstva
Update existing field
- Aktualizovat existující pole
+ Aktualizovat existující pole
Output file
- Výstupní soubor
+ Výstupní soubor
...
- ...
+ ...
FieldsCalculatorDialog
[Save to temporary file]
- [Uložit do dočasného souboru]
Save file
- Uložit soubor
+ Uložit soubor
Unable to execute algorithm
- Nemohu spustit algoritmus
Wrong or missing parameter values
- Chybné nebo chybějící hodnoty parametru
FileDirectorySelector
...
- ...
+ ...
Select directory
- Vybrat složku
Select file
- Vybrat soubor
All files (*.*)
- Všechny soubory (*)
GdalTools
- &Input directory:
- &Vstupní složka:
+ &Input directory
+ &Vstupní složka
- &Output directory:
- &Výstupní složka:
+ &Output directory
+ &Výstupní složka
+
+
+ The selected file is not a supported OGR format
+ Zvolený soubor není podporovaný formát OGR
The process failed to start. Either the invoked program is missing, or you may have insufficient permissions to invoke the program.
@@ -4088,12 +3148,20 @@ sloupec geometrie - sloupec s unikátními celočíselnými hodnotamiVyskytla se neznámá chyba.
- The selected file is not a supported OGR format
- Zvolený soubor není podporovaný formát OGR
+ Plugin error
+ Chyba zásuvného modulu
- Quantum GIS version detected:
- Zjištěna verze Quantum GISu:
+ Unable to load {0} plugin.
+The required "{1}" module is missing.
+Install it and try again.
+ Nemohu načíst zásuvný modul {0}.
+Požadovaný modul "{1}" chybí.
+Nainstalujte ho a zkuste znovu.
+
+
+ QGIS version detected:
+ Zjištěna verze QGISu:
This version of Gdal Tools requires at least QGIS version 1.0.0
@@ -4102,105 +3170,17 @@ Plugin will not be enabled.
Zásuvný modul nebude zapnut.
- &Raster
- &Rastr
+ Projections
+ Projekce
- Build Virtual Raster (catalog)
- Vytvořit virtuální rastr (katalog)
-
-
- Builds a VRT from a list of datasets
- Vytvoří VRT ze seznamu datasetů
-
-
- Contour
- Izolinie
-
-
- Builds vector contour lines from a DEM
- Vytvoří vektorové izolinie/vrstevnice z DEMu
-
-
- Rasterize
- Převést na rastr
-
-
- Burns vector geometries into a raster
- Vypálí vektorové geometrie do rastru
-
-
- Polygonize
- Převést na polygony
-
-
- Produces a polygon feature layer from a raster
- Vytvoří polygonovou vrstvu z rastrové
-
-
- Merge
- Sloučit
-
-
- Build a quick mosaic from a set of images
- Vytvoří rychlou mozaiku ze sady obrázků
-
-
- Sieve
- Síto
-
-
- Removes small raster polygons
- Odstraní malé polygony rastru
-
-
- Proximity
- Blízkost
-
-
- Produces a raster proximity map
- Vytvoří blízkostní mapu
-
-
- Near black
- Blízko černé
-
-
- Convert nearly black/white borders to exact value
- Převede hodnoty poblíž hranic černá/bílá na přesnou hodnotu
-
-
- Warp
- Deformovat
+ Warp (Reproject)
+ Deformovat (změnit projekci)
Warp an image into a new coordinate system
Deformuje obrázek do nového souřadnicového systému
-
- Grid
- Mřížka
-
-
- Create raster from the scattered data
- Vytvoří rastr z rozptýlených dat
-
-
- Translate
- Převést
-
-
- Converts raster data between different formats
- Převádí rastrová data do a z různých formátů
-
-
- Information
- Informace
-
-
- Lists information about raster dataset
- Vypíše informace o rastrovém datasetu
-
Assign projection
Přiřadit projekci
@@ -4210,56 +3190,40 @@ Zásuvný modul nebude zapnut.
Přidá informaci o projekci do rastru
- Build overviews
- Vytvořit náhledy
+ Extract projection
+ Extrahovat projekci
- Build Virtual Raster (Catalog)
- Vytvořit Virtuální rastr (katalog)
+ Extract projection information from raster(s)
+ Extrahovat informaci o projekci z rastru/ů
+
+
+ Conversion
+ Převod
Rasterize (Vector to raster)
Převést na rastr (vektor na rastr)
+
+ Burns vector geometries into a raster
+ Vypálí vektorové geometrie do rastru
+
Polygonize (Raster to vector)
Převést na polygony (rastr na vektor)
- Proximity (Raster distance)
- Blízkost (vzdálenost rastru)
-
-
- Warp (Reproject)
- Deformovat (změnit projekci)
-
-
- Grid (Interpolation)
- Grid (interpolace)
+ Produces a polygon feature layer from a raster
+ Vytvoří polygonovou vrstvu z rastrové
Translate (Convert format)
Převést (změnit formát)
- Build overviews (Pyramids)
- Vytvořit přehledy (pyramidy)
-
-
- Builds or rebuilds overview images
- Vytvoří nebo obnoví náhledové obrázky
-
-
- Clipper
- Ořezávač
-
-
- Unable to load {0} plugin.
-The required "{1}" module is missing.
-Install it and try again.
- Nemohu načíst zásuvný modul {0}.
-Požadovaný modul "{1}" chybí.
-Nainstalujte ho a zkuste znovu.
+ Converts raster data between different formats
+ Převádí rastrová data do a z různých formátů
RGB to PCT
@@ -4277,58 +3241,42 @@ Nainstalujte ho a zkuste znovu.
Convert an 8bit paletted image to 24bit RGB
Převede obrázek s 8bit paletou na 24bitový RGB
-
- Tile index
- Index dlaždic
-
-
- Build a shapefile as a raster tileindex
- Vytvořit shapefile jako rastrový index dlaždic
-
-
- DEM (Terrain models)
- DEM (modely terénu)
-
-
- Plugin error
- Chyba zásuvného modulu
-
-
- Unable to load %1 plugin.
-The required "%2" module is missing.
-Install it and try again.
- Nemohu načíst zásuvný modul %1.
-Požadovaný modul "%2" chybí.
-Nainstalujte ho a zkuste znovu.
-
-
- QGIS version detected:
- Zjištěna verze QGISu:
-
-
- Projections
- Projekce
-
-
- Extract projection
- Extrahovat projekci
-
-
- Extract projection information from raster(s)
- Extrahovat informaci o projekci z rastru/ů
-
-
- Conversion
- Převod
-
Extraction
Extrakce
+
+ Contour
+ Izolinie
+
+
+ Builds vector contour lines from a DEM
+ Vytvoří vektorové izolinie/vrstevnice z DEMu
+
+
+ Clipper
+ Ořezávač
+
Analysis
Analýza
+
+ Sieve
+ Síto
+
+
+ Removes small raster polygons
+ Odstraní malé polygony rastru
+
+
+ Near black
+ Blízko černé
+
+
+ Convert nearly black/white borders to exact value
+ Převede hodnoty poblíž hranic černá/bílá na přesnou hodnotu
+
Fill nodata
Vyplnit nodata (žádná data)
@@ -4337,6 +3285,26 @@ Nainstalujte ho a zkuste znovu.
Fill raster regions by interpolation from edges
Vyplnit regiony rastru nterpolací z okrajů
+
+ Proximity (Raster distance)
+ Blízkost (vzdálenost rastru)
+
+
+ Produces a raster proximity map
+ Vytvoří blízkostní mapu
+
+
+ Grid (Interpolation)
+ Grid (interpolace)
+
+
+ Create raster from the scattered data
+ Vytvoří rastr z rozptýlených dat
+
+
+ DEM (Terrain models)
+ DEM (modely terénu)
+
Tool to analyze and visualize DEMs
Nástroj k analýze a vizualizaci DEM modelů
@@ -4345,6 +3313,46 @@ Nainstalujte ho a zkuste znovu.
Miscellaneous
Různé
+
+ Build Virtual Raster (Catalog)
+ Vytvořit Virtuální rastr (katalog)
+
+
+ Builds a VRT from a list of datasets
+ Vytvoří VRT ze seznamu datasetů
+
+
+ Merge
+ Sloučit
+
+
+ Build a quick mosaic from a set of images
+ Vytvoří rychlou mozaiku ze sady obrázků
+
+
+ Information
+ Informace
+
+
+ Lists information about raster dataset
+ Vypíše informace o rastrovém datasetu
+
+
+ Build overviews (Pyramids)
+ Vytvořit přehledy (pyramidy)
+
+
+ Builds or rebuilds overview images
+ Vytvoří nebo obnoví náhledové obrázky
+
+
+ Tile index
+ Index dlaždic
+
+
+ Build a shapefile as a raster tileindex
+ Vytvořit shapefile jako rastrový index dlaždic
+
GdalTools settings
Nastavení GdalTools
@@ -4353,22 +3361,6 @@ Nainstalujte ho a zkuste znovu.
Various settings for Gdal Tools
Různá nastavení GdalTools
-
- About GdalTools
- O GdalTools
-
-
- Displays information about Gdal Tools
- Zobrazí informace o GdalTools
-
-
- &Input directory
- &Vstupní složka
-
-
- &Output directory
- &Výstupní složka
-
GdalToolsAboutDialog
@@ -4392,7 +3384,7 @@ Nainstalujte ho a zkuste znovu.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4410,54 +3402,6 @@ p, li { white-space: pre-wrap; }
Close
Zavřít
-
-
-(using GDAL v. %1)
-
-(využívá GDAL v. %1)
-
-
- GDAL Tools (AKA Raster Tools) is a plugin for QuantumGIS aiming at making life simpler for users of GDAL Utilities, providing a simplified graphical interface for most commonly used programs.
-
-The plugin is being developed by Faunalia (http://faunalia.it) with help from GIS-lab (http://gis-lab.info).
-Icons by Robert Szczepanek.
-Sponsorship by Silvio Grosso was much appreciated.
-
-Please help us by testing the tools, reporting eventual issues, improving the code, or providing financial support.
-
-DEVELOPERS:
- Faunalia
- Paolo Cavallini
- Giuseppe Sucameli
- Lorenzo Masini
- GIS-lab
- Maxim Dubinin
- Alexander Bruy
-icons by Robert Szepanek
-
-HOMEPAGE:
-http://trac.faunalia.it/GdalTools-plugin
- GDAL nástroje (AKA Rastrové nástroje) je zásuvný modul pro QuantumGIS mající za cíl zjednodušit život uživatelům GDAL Utilit poskytnutím zjednodušeného grafického rozhraní pro nejčastěji používané programy.
-
-Zásuvný modul vyvíjí Faunalia (http://faunalia.it) s pomocí GIS-lab (http://gis-lab.info).
-Ikony vytvořil Robert Szczepanek.
-Sponzorství, které poskytl Silvio Grosso, bylo velmi oceněno.
-
-Pomozte nám prosím s testováním, hlášením případných potíží apod., vylepšováním kódu, nebo poskytnutím finanční podpory.
-
-VÝVOJÁŘI:
- Faunalia
- Paolo Cavallini
- Giuseppe Sucameli
- Lorenzo Masini
- GIS-lab
- Maxim Dubinin
- Alexander Bruy
-Ikony vytvořil Robert Szepanek
-
-DOMOVSKÁ STRÁNKA:
-http://trac.faunalia.it/GdalTools-plugin
-
GdalToolsBaseBatchWidget
@@ -4475,7 +3419,7 @@ http://trac.faunalia.it/GdalTools-plugin
No input files to process.
- Žádné vstupní soubory ke zpracování.
The following files were not created:
@@ -4483,12 +3427,6 @@ http://trac.faunalia.it/GdalTools-plugin
Následující soubory nebyly vytvořeny:
{0}
-
- The following files were not created:
-%1
- Následující soubory nebyly vytvořeny:
-%1
-
GdalToolsBaseDialog
@@ -4502,10 +3440,6 @@ Do you want terminate it anyway?
Příkaz stále běží.
Chcete ho přesto ukončit?
-
- Invalid parameters.
- Neplatné parametry.
-
GdalToolsBasePluginWidget
@@ -4529,14 +3463,6 @@ Chcete ho přesto ukončit?
%s not created.
%s nebyl vytvořen.
-
- Elaboration completed.
- Zpracování dokončeno.
-
-
- %1 not created.
- %1 nebyl vytvořen.
-
GdalToolsDialog
@@ -4562,254 +3488,6 @@ Chcete ho přesto ukončit?
Reset
Reset
-
- Select the input file for Proximity
- Vyberte vstupní soubor pro Blízkost
-
-
- Select the raster file to save the results to
- Vyberte rastrový soubor k uložení výsledků
-
-
- Select the input file for Near Black
- Vyberte vstupní soubor pro Blízko černé
-
-
- Select the input file for Grid
- Vyberte vstupní soubor pro Mřížku
-
-
- Select the mask file
- Vyberte soubor masky
-
-
- Warning
- Upozornění
-
-
- Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
- Varování: informace o SRS všech vrstev v podsložkách bude přepsána. Jste si jistí?
-
-
- Select the file to analyse
- Vyberte soubor k analýze
-
-
- {0} not created.
- {0} nebyl vytvořen.
-
-
- Output size or resolution required
- Vyžadována výchozí velikost nebo rozlišení
-
-
- The output file doesn't exist. You must set up the output size or resolution to create it.
- Výstupní soubor neexistuje. Pro jeho vytvoření musíte nejdřív nastavit výstupní velikost nebo rozlišení.
-
-
- Select the input directory with files to Assign projection
- Vyberte vstupní složku pro Přiřadit projekci
-
-
- Assign projection
- Přiřadit projekci
-
-
- This raster already found in map canvas
- Tento rastr je již načten v mapovém okně
-
-
- Select the files for VRT
- Vyberte soubory pro VRT
-
-
- Select where to save the VRT
- Vyberte kam uložit VRT
-
-
- VRT (*.vrt)
- VRT (*.vrt)
-
-
- Select the input file for Warp
- Vyberte vstupní soubor pro Deformaci
-
-
- Select the input directory with files to Warp
- Vyberte vstupní složku se soubory k Deformaci
-
-
- [select levels]
- [vyberte úrovně]
-
-
- Select the output directory to save the results to
- Vyberte rastrový soubor k uložení výsledků
-
-
- Select the input file for Sieve
- Vyberte vstupní soubor pro Síto
-
-
- Select the files to Merge
- Vyberte soubory ke Sloučení
-
-
- Select where to save the Merge output
- Vyberte kam uložit výstup Sloučení
-
-
- Select the input file for convert
- Vyberte vstupní soubor k převedení
-
-
- Select the input file for Polygonize
- Vyberte vstupní soubor pro převod na polygony
-
-
- Select where to save the Polygonize output
- Vyberte kam uložit výstup převodu na polygony
-
-
- Select the input directory with files to Merge
- Vyberte vstupní složku se soubory ke Sloučení
-
-
- Finished
- Hotovo
-
-
- Processing completed.
- Zpracování dokončeno.
-
-
- %1 not created.
- %1 nebyl vytvořen.
-
-
- Select the input file for Contour
- Vyberte vstupní soubor pro Izolinie
-
-
- Select where to save the Contour output
- Vyberte kam uložit izolinie
-
-
- No active raster layers. You must add almost one raster layer to continue.
- Žádné aktivní rastrové vrstvy. Pro pokračování musíte přidat alespoň jednu rastrovou vrstvu.
-
-
- Select the input file for Translate
- Vyberte vstupní soubor pro převedení
-
-
- Select the cutline file
- Vyberte soubor řezné čáry
-
-
- Select the input directory with files to Translate
- Vyberte vstupní složku se soubory pro převedení
-
-
- Translate - srcwin
- Posunout - srcwin
-
-
- Image coordinates (pixels) must be integer numbers.
- Souřadnice obrazu (pixely) musí být celá čísla.
-
-
- Translate - prjwin
- Posunout - prjwin
-
-
- Image coordinates (geographic) must be numbers.
- Souřadnice obrazu (geografické) musí být čísla.
-
-
- Select the files to analyse
- Vyberte soubory k analýze
-
-
- Output size required
- Vyžadována výchozí velikost
-
-
- The output file doesn't exist. You must set up the output size to create it.
- Výstupní soubor neexistuje. Pro jeho vytvoření musíte nejdřív nastavit výstupní velikost.
-
-
- Select the input directory with files for convert
- Vyberte vstupní složku se soubory pro převedení
-
-
- Convert paletted image to RGB
- Převést obrázek s paletou na RGB
-
-
- Band to convert:
- Pásmo k převedení:
-
-
- Select the file for DEM
- Vyberte soubor pro DEM
-
-
- Select the color configuration file
- Vyberte soubor nastavení barev
-
-
- Select the input file for Rasterize
- Vyberte vstupní soubor pro převod na rastr
-
-
- Copy
- Kopírovat
-
-
- Copy all
- Kopírovat vše
-
-
- Select the input directory with files for VRT
- Vyberte vstupní adresář se soubory pro VRT
-
-
- Select the input directory with raster files
- Vyberte vstupní adresář s rastrovými soubory
-
-
- Select where to save the TileIndex output
- Vyberte kam uložit výstup indexu dlaždic
-
-
- Error retrieving the extent
- Chyba získání rozsahu
-
-
- GDAL was unable to retrieve the extent from any file.
-The "Use intersected extent" option will be unchecked.
- GDAL nebyl schopen získat rozsah ze žádného souboru.
-Volba "Použít protnutý rozsah" bude deaktivována.
-
-
- Empty extent
- Prázdný rozsah
-
-
- The computed extent is empty.
-Disable the "Use intersected extent" option to have a nonempty output.
- Vypočtený rozsah je prázdný.
-Deaktivujte volbu "Použít protnutý rozsah" pro získání použitelného výstupu.
-
-
- Select the input file
- Vyberte vstupní soubor
-
-
- Select the input directory with files
- Vyberte vstupní složku se soubory
-
Extract projection
@@ -4835,6 +3513,226 @@ Deaktivujte volbu "Použít protnutý rozsah" pro získání použitel
Create also prj file
Vytvořit také prj soubor
+
+ Select the file for DEM
+ Vyberte soubor pro DEM
+
+
+ Select the raster file to save the results to
+ Vyberte rastrový soubor k uložení výsledků
+
+
+ Select the color configuration file
+ Vyberte soubor nastavení barev
+
+
+ Select the input file for Grid
+ Vyberte vstupní soubor pro Mřížku
+
+
+ Select the input file for Rasterize
+ Vyberte vstupní soubor pro převod na rastr
+
+
+ Select the input file for Sieve
+ Vyberte vstupní soubor pro Síto
+
+
+ Select the input file for Warp
+ Vyberte vstupní soubor pro Deformaci
+
+
+ Select the mask file
+ Vyberte soubor masky
+
+
+ Select the input directory with files to Warp
+ Vyberte vstupní složku se soubory k Deformaci
+
+
+ Select the output directory to save the results to
+ Vyberte rastrový soubor k uložení výsledků
+
+
+ Output size or resolution required
+ Vyžadována výchozí velikost nebo rozlišení
+
+
+ The output file doesn't exist. You must set up the output size or resolution to create it.
+ Výstupní soubor neexistuje. Pro jeho vytvoření musíte nejdřív nastavit výstupní velikost nebo rozlišení.
+
+
+ Select the input file for Translate
+ Vyberte vstupní soubor pro převedení
+
+
+ Select the input directory with files to Translate
+ Vyberte vstupní složku se soubory pro převedení
+
+
+ Translate - srcwin
+ Posunout - srcwin
+
+
+ Image coordinates (pixels) must be integer numbers.
+ Souřadnice obrazu (pixely) musí být celá čísla.
+
+
+ Translate - prjwin
+ Posunout - prjwin
+
+
+ Image coordinates (geographic) must be numbers.
+ Souřadnice obrazu (geografické) musí být čísla.
+
+
+ Select the input directory with raster files
+ Vyberte vstupní adresář s rastrovými soubory
+
+
+ Select where to save the TileIndex output
+ Vyberte kam uložit výstup indexu dlaždic
+
+
+ Convert paletted image to RGB
+ Převést obrázek s paletou na RGB
+
+
+ Select the input file for convert
+ Vyberte vstupní soubor k převedení
+
+
+ Select the input directory with files for convert
+ Vyberte vstupní složku se soubory pro převedení
+
+
+ Select the file to analyse
+ Vyberte soubor k analýze
+
+
+ Select the input directory with files to Assign projection
+ Vyberte vstupní složku pro Přiřadit projekci
+
+
+ Copy
+ Kopírovat
+
+
+ Copy all
+ Kopírovat vše
+
+
+ Select the input file for Polygonize
+ Vyberte vstupní soubor pro převod na polygony
+
+
+ Select the files for VRT
+ Vyberte soubory pro VRT
+
+
+ Select where to save the VRT
+ Vyberte kam uložit VRT
+
+
+ VRT (*.vrt)
+ VRT (*.vrt)
+
+
+ Select the input directory with files for VRT
+ Vyberte vstupní adresář se soubory pro VRT
+
+
+ Select the input file for Near Black
+ Vyberte vstupní soubor pro Blízko černé
+
+
+ Select the input file
+ Vyberte vstupní soubor
+
+
+ Select the input directory with files
+ Vyberte vstupní složku se soubory
+
+
+ Select the files to Merge
+ Vyberte soubory ke Sloučení
+
+
+ Error retrieving the extent
+ Chyba získání rozsahu
+
+
+ GDAL was unable to retrieve the extent from any file.
+The "Use intersected extent" option will be unchecked.
+ GDAL nebyl schopen získat rozsah ze žádného souboru.
+Volba "Použít protnutý rozsah" bude deaktivována.
+
+
+ Empty extent
+ Prázdný rozsah
+
+
+ The computed extent is empty.
+Disable the "Use intersected extent" option to have a nonempty output.
+ Vypočtený rozsah je prázdný.
+Deaktivujte volbu "Použít protnutý rozsah" pro získání použitelného výstupu.
+
+
+ Select where to save the Merge output
+ Vyberte kam uložit výstup Sloučení
+
+
+ Select the input directory with files to Merge
+ Vyberte vstupní složku se soubory ke Sloučení
+
+
+ {0} not created.
+ {0} nebyl vytvořen.
+
+
+ Select the files to analyse
+ Vyberte soubory k analýze
+
+
+ Select the input file for Contour
+ Vyberte vstupní soubor pro Izolinie
+
+
+ Select where to save the Contour output
+ Vyberte kam uložit izolinie
+
+
+ Select the input file for Proximity
+ Vyberte vstupní soubor pro Blízkost
+
+
+ Warning
+ Upozornění
+
+
+ Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
+ Varování: informace o SRS všech vrstev v podsložkách bude přepsána. Jste si jistí?
+
+
+ Finished
+ Hotovo
+
+
+ Processing completed.
+ Zpracování dokončeno.
+
+
+ Assign projection
+ Přiřadit projekci
+
+
+ This raster already found in map canvas
+ Tento rastr je již načten v mapovém okně
+
+
+ Select where to save the Polygonize output
+ Vyberte kam uložit výstup převodu na polygony
+
GdalToolsExtentSelector
@@ -4914,10 +3812,6 @@ Deaktivujte volbu "Použít protnutý rozsah" pro získání použitel
Gdal Tools settings
Nastavení GDAL nástrojů
-
- Path to the GDAL binaries
- Cesta k binárkám GDAL
-
Path to the GDAL executables
@@ -4952,36 +3846,6 @@ Deaktivujte volbu "Použít protnutý rozsah" pro získání použitel
GDAL driver path
Cesta ke GDAL ovladači
-
- GDAL pymod path
- Cesta ke GDAL pymod
-
-
- A list of colon-separated (Linux and MacOS) or
-semicolon-separated (Windows) paths to both binaries
-and python executables.
-
-MacOS users usually need to set it to something like
-/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
- Seznam hodnot oddělených dvojtečkou (Linux a MacOS) nebo
-středníkem (Windows) s cestami k binárkám
-a spustitelným souborům pythonu.
-
-Uživatelé MacOS obvykle musí zadat cosi jako
-/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
-
-
- A list of colon-separated (Linux and MacOS) or
-semicolon-separated (Windows) paths to python modules.
- Seznam hodnot oddělených dvojtečkou (Linux a MacOS) nebo
-středníkem (Windows) s cestami k modulům pythonu.
-
-
- Useful to open local GDAL documentation instead of online help
-when pressing on the tool dialog's Help button.
- Užitečné pro otevření místní dokumentace GDAL místo online nápovědy
-při stisku tlačítka Nápověda v dialogu nástroje.
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to both binaries
@@ -5023,26 +3887,6 @@ při stisku tlačítka Nápověda v dialogu nástroje.
GdalToolsWidget
-
- Build Virtual Raster
- Vytvořit Virtuální Rastr
-
-
- &Input files:
- &Vstupní soubory:
-
-
- Select...
- Vybrat...
-
-
- &Output file:
- &Výstupní soubor:
-
Build Virtual Raster (Catalog)
@@ -5065,6 +3909,14 @@ při stisku tlačítka Nápověda v dialogu nástroje.
&Input files
&Vstupní soubory
+
+ Recurse subdirectories
+ Zahrnout podsložky
+
Allow projection difference
Povolit rozdíl projekcí
-
- &Resolution:
- &Rozlišení:
-
-
- &Source No Data:
- &No Data zdroje:
-
Clipper
Ořezávač
+
+ &No data value
+ &No data hodnota
+
+
+ &Input file (raster)
+ &Vstupní soubor (rastr)
+
Clipping mode
@@ -5152,89 +4009,11 @@ při stisku tlačítka Nápověda v dialogu nástroje.
Create an output alpha band
Vytvořit výstupní alfa kanál
-
- &No data value:
- &Hodnota no data:
-
-
- &No data value
- &No data hodnota
-
-
- Re-Enable Clipping
- Znovu zapnout ořezávání
-
-
- Select the extent by drag & drop on canvas
- Zvolte rozsah pomocí táhni & pusť v mapovém okně
-
-
- or change the extent coordinates
- nebo změňte souřadnice rozsahu
-
-
- 1
- 1
-
-
- 2
- 2
-
-
- or change the extent coordinates:
- nebo změňte souřadnice rozsahu:
-
-
- 1:
- 1:
-
-
- x
- x
-
-
- y
- y
-
-
- 2:
- 2:
-
-
- Grab pseudocolor table from the first image
- Získat tabulku pseudobarev z prvního obrázku
-
Contour
Izolinie
-
- &Input file (raster):
- &Vstupní soubor (rastr):
-
-
- &Output directory for contour lines (shapefile):
- &Výstupní složka pro izolinie (shapefile):
-
-
- &Attribute name:
- &Název atributu:
-
-
- &Input file (raster)
- &Vstupní soubor (rastr)
-
-
- &Output directory for contour lines (shapefile)
- &Výstupní složka pro izolinie (shapefile)
-
&Output file for contour lines (vector)
@@ -5260,10 +4039,6 @@ při stisku tlačítka Nápověda v dialogu nástroje.
ELEV
ELEV
-
- I&nterval between contour lines:
- I&nterval mezi izoliniemi:
-
Convert RGB image to paletted
@@ -5292,226 +4067,15 @@ při stisku tlačítka Nápověda v dialogu nástroje.
&Input file
&Vstupní soubor
-
- Band to convert
- Pásmo k převedení
-
-
- &Input file:
- &Vstupní soubor:
-
Number of colors
Počet barev
- Grid
- Mřížka
-
-
- &Z Field:
- &Z pole:
-
-
- &Algorithm:
- &Algoritmus:
-
-
- &Z Field
- &Z pole
-
-
- &Algorithm
- &Algoritmus
-
-
- Inverse distance to a power
- Inverzní vzdálenost k mocnině
-
-
- Moving average
- Klouzavý prùmìr
-
-
- Nearest neighbor
- Nejbližší soused
-
-
- Data metrics
- Metrika dat
-
-
- Power
- Mocnina
-
-
- Smoothing
- Vyhlazování
-
-
- Radius1
- Poloměr1
-
-
- Radius2
- Poloměr2
-
-
- Angle
- Úhel
-
-
- Width
- Šířka
-
-
- Height
- Výška
-
-
- Max points
- Max. bodů
-
-
- Grid (Interpolation)
- Grid (interpolace)
-
-
- Min points
- Min. bodů
-
-
- No data
- No data
-
-
- Metrics
- Metrika
-
-
- Power:
- Mocnina:
-
-
- Smoothing:
- Vyhlazování:
-
-
- Radius1:
- Poloměr1:
-
-
- Radius2:
- Poloměr2:
-
-
- Angle:
- Úhel:
-
-
- Max points:
- Max. bodů:
-
-
- Min points:
- Min. bodů:
-
-
- No data:
- No data:
-
-
- Metrics:
- Metrika:
-
-
- Minimum
- Minimum
-
-
- Maximum
- Maximum
-
-
- Range
- Rozsah
-
-
- Info
- Informace
-
-
- Raster info
- Informace o rastru
-
-
- Suppress GCP printing
- Potlačit tisk GCP
-
-
- Suppress metadata printing
- Potlačit tisk metadat
-
-
- Merge
- Sloučit
-
-
- Layer stack
- Sada vrstev
-
-
- Use intersected extent
- Použít protnutý rozsah
+ Band to convert
+ Pásmo k převedení
Compute &edges
Vypočítat &hrany
+
+ Use Zevenbergen&&Thorne formula (instead of the Horn's one)
+ Použít vzorec Zevenbergena&&Thorna (místo Hornova)
+
&Mode
@@ -5573,11 +4142,6 @@ při stisku tlačítka Nápověda v dialogu nástroje.
Roughness
Drsnost
-
- Use Zevenbergen&&Thorne formula (instead of the Horn's one)
- Použít vzorec Zevenbergena&&Thorna (místo Hornova)
-
Mode Options
@@ -5652,8 +4216,216 @@ při stisku tlačítka Nápověda v dialogu nástroje.
&Možnosti vytvoření
- &Creation Options:
- &Možnosti vytvoření:
+ Fill Nodata
+ Vyplnit žádná data
+
+
+ &Input Layer
+ &Vstupní vrstva
+
+
+ Output format
+ Výstupní formát
+
+
+ Search distance
+ Vyhledávací vzdálenost
+
+
+ Smooth iterations
+ Plynulé iterace
+
+
+ Band to operate on
+ Básmo se kterým se bude pracovat
+
+
+ Validity mask
+ Maska platnosti
+
+
+ Do not use the default validity mask
+ Nepoužívat výchozí masku platnosti
+
+
+ Grid (Interpolation)
+ Grid (interpolace)
+
+
+ &Z Field
+ &Z pole
+
+
+ &Algorithm
+ &Algoritmus
+
+
+ Inverse distance to a power
+ Inverzní vzdálenost k mocnině
+
+
+ Moving average
+ Klouzavý prùmìr
+
+
+ Nearest neighbor
+ Nejbližší soused
+
+
+ Data metrics
+ Metrika dat
+
+
+ Power
+ Mocnina
+
+
+ Smoothing
+ Vyhlazování
+
+
+ Radius1
+ Poloměr1
+
+
+ Radius2
+ Poloměr2
+
+
+ Max points
+ Max. bodů
+
+
+ Min points
+ Min. bodů
+
+
+ Angle
+ Úhel
+
+
+ No data
+ No data
+
+
+ Metrics
+ Metrika
+
+
+ Minimum
+ Minimum
+
+
+ Maximum
+ Maximum
+
+
+ Range
+ Rozsah
+
+
+ Resize
+ Změnit velikost
+
+
+ Width
+ Šířka
+
+
+ Height
+ Výška
+
+
+ Info
+ Informace
+
+
+ Raster info
+ Informace o rastru
+
+
+ Suppress GCP printing
+ Potlačit tisk GCP
+
+
+ Suppress metadata printing
+ Potlačit tisk metadat
+
+
+ Merge
+ Sloučit
+
+
+ Layer stack
+ Sada vrstev
+
+
+ Use intersected extent
+ Použít protnutý rozsah
+
+
+ Grab pseudocolor table from the first image
+ Získat tabulku pseudobarev z prvního obrázku
How &far from black (or white)
Jak &daleko od černé (nebo bílé)
-
- How &far from black (or white):
- Jak &daleko od černé (nebo bílé):
-
Search for nearly &white (255) pixels instead of black ones
Hledat pixely blízko &bílé (255) místo černé
-
- Add overview
- Přidat náhled
-
Build overviews (Pyramids)
Vytvořit přehledy (pyramidy)
-
- old
- starý
-
-
- Resampling method
- Metoda převzorkování
-
-
- nearest
- nejbližší
-
-
- average
- průměr
-
-
- gauss
- gauss
-
-
- cubic
- kubický
-
-
- average_mp
- průměrný_MP
-
-
- average_magphase
- average_magphase
-
-
- mode
- režim
-
-
- new
- nový
-
-
- Levels (space delimited)
- Úrovně (oddělené mezerou)
-
Remove all overviews.
@@ -5737,48 +4457,6 @@ při stisku tlačítka Nápověda v dialogu nástroje.
Clean
Vyčistit
-
- In order to generate external overview (for GeoTIFF especially).
- Pro vytvoření externího přehledu (především pro GeoTIFF).
-
-
- Open in read-only mode
- Otevřít pouze ke čtení
-
-
- Create external overviews in TIFF format, compressed using JPEG.
- Vytvořit externí přehledy v TIFF formátu, komprimované pomocí JPEG.
-
-
- Overviews in TIFF format with JPEG compression
- Přehledy ve formátu TIFF s JPEG kompresí
-
-
- For JPEG compressed external overviews,
-the JPEG quality can be set.
- Pro externí přehledy komprimované pomocí JPEG
-lze nastavit JPEG kvalitu.
-
-
- JPEG Quality (1-100)
- JPEG kvalita (1-100)
-
-
- Alternate overview format using Erdas Imagine format,
-placing the overviews in an associated .aux file
-suitable for direct use with Imagine,ArcGIS, GDAL.
- Alternativní přehled ve formátu Erdas Imagine,
-který umístí přehledy do přiřazeného .aux souboru,
-vhodný pro přímé použití v Imagine,ArcGIS, GDAL.
-
-
- Use Imagine format (.aux file)
- Použít Imagine formát (.aux soubor)
-
-
- Polygonize
- Převést na polygony
-
Polygonize (Raster to vector)
@@ -5794,23 +4472,15 @@ vhodný pro přímé použití v Imagine,ArcGIS, GDAL.
&Field name
&Název pole
-
- Use mask
- Použít masku
-
-
- &Output file for polygons (shapefile):
- &Výstupní soubor pro polygony (shapefile):
-
DN
DN
- &Field name:
- &Název pole:
+ Use mask
+ Použít masku
Desired SRS
Požadovaný SRS
-
- Desired SRS:
- Požadovaný SRS:
-
Output will be:
@@ -5841,24 +4507,12 @@ vhodný pro přímé použití v Imagine,ArcGIS, GDAL.
- pokud vstup je GeoTiff, pak bude přepsán
- Recurse subdirectories
- Zahrnout podsložky
-
-
- Proximity
- Blízkost
-
-
- &Values:
- &Hodnoty:
-
-
- &Dist units:
- &Jednotky vzdálenosti:
+ Select...
+ Vybrat...
0
0
-
- &Max dist:
- &Max vzdál.:
-
-
- &No data:
- &No data:
-
-
- &Fixed buf val:
- &Pevná hodn. buf.:
-
-
- Rasterize
- Převést na rastr
-
Rasterize (Vector to raster)
@@ -5967,26 +4605,6 @@ vhodný pro přímé použití v Imagine,ArcGIS, GDAL.
Vertical
Svisle
-
- New size (required if output file doens't exist)
- Nová velikost (vyžadována, pokud výstupní soubor neexistuje)
-
-
- &Output file for rasterized vectors (raster, must exists)
- &Výstupní soubor pro rasterizované vektory (rastr, musí existovat)
-
-
- &Input file (shapefile):
- &Vstupní soubor (shapefile):
-
-
- &Output file for rasterized vectors (raster, must exists):
- &Výstupní soubor pro rastr z vektorů (rastr, musí existovat):
-
-
- &Attribute field:
- &Atributové pole:
-
Sieve
@@ -6012,261 +4630,6 @@ vhodný pro přímé použití v Imagine,ArcGIS, GDAL.
8
8
-
- &Threshold:
- &Práh:
-
-
- &Pixel connections:
- &Spojení pixelů:
-
-
- Translate
- Převést
-
-
- &Input Layer:
- &Vstupní vrstva:
-
-
- &Target SRS:
- &Cílový SRS:
-
-
- Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
- Procento k změně velikosti obrázku. Změní poměr velikost pixelu/rozlišení obrázku následovně: 25% vytvoří obraz s pixely 4x většími.
-
-
- %
- %
-
-
- Assign a specified nodata value to output bands.
- Přiřadí definovanou hodnotu nodata k výstupním pásmům.
-
-
- To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
-The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
- Pro vystavení datasetu s 1 pásmem s barevnou tabulkou jako datases se 3 (RGB) nebo 4 (RGBA) pásmy.
-Užitečné pro výstupní ovladače jako JPEG, JPEG2000, MrSID, ECW které nepodporují indexované datasety.
-Hodnota 'šedá' (z GDAL 1.7.0) dovoluje rozšířit dataset s barevnou tabulkou, který obsahuje jen úrovně šedi na dataset s indexovanou šedí.
-
-
- Fill Nodata
- Vyplnit žádná data
-
-
- &Input Layer
- &Vstupní vrstva
-
-
- Search distance
- Vyhledávací vzdálenost
-
-
- Smooth iterations
- Plynulé iterace
-
-
- Band to operate on
- Básmo se kterým se bude pracovat
-
-
- Validity mask
- Maska platnosti
-
-
- Do not use the default validity mask
- Nepoužívat výchozí masku platnosti
-
-
- Translate (Convert format)
- Převést na jiný formát
-
-
- &Target SRS
- &Cílový SRS
-
-
- Outsize
- Nadměrně verlký
-
-
- Expand
- Rozšířit
-
-
- Gray
- Šedá
-
-
- RGB
- RGB
-
-
- RGBA
- RGBA
-
-
- Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
- Vybere podokno ze zdrojového obrázku pro kopírování založené na umístění pixel/linie. (Zadejte Xoff Yoff Xvelikost Yvelikost)
-
-
- Srcwin
- Srcwin
-
-
- Prjwin
- Prjwin
-
-
- Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
- Vybere podokno ze zdrojového obrázku pro kopírování (jako -srcwin) ale s rohy zadanými v georeferencovaných souřadnicích. (Zadejte ulx uly lrx lry)
-
-
- Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
- Kopírovat všechny podskupiny datasetu do samostatných výstupních souborů. Použijte s formáty jako HDF nebo OGDI které mají podskupiny datasetu.
-
-
- Sds
- Sds
-
-
- Output format
- Výstupní formát
-
-
- Warp
- Deformovat
-
-
- &Source SRS:
- &Zdrojový SRS:
-
-
- &Resampling method:
- &Metoda převzorkování:
-
-
- Warp (Reproject)
- Změnit projekci
-
-
- Near
- Blízko
-
-
- Bilinear
- Bilineární
-
-
- Cubic
- Kubický
-
-
- Cubic spline
- Kubický spline
-
-
- Lanczos
- Lanczos
-
-
- Cutline
- Řezná čára
-
-
- &Memory used for caching:
- &Vyrovnávací paměť:
-
-
- MB
- MB
-
-
- Set no data value
- Nastavit no data hodnotu
-
-
- &Source SRS
- &Zdrojový SRS
-
-
- &Resampling method
- &Metoda převzorkování
-
-
- No data values
- Hodnoty "žádná data"
-
-
- &Memory used for caching
- &Paměť použitá pro kešování
-
-
- Resize
- Změnit velikost
-
-
- Image width
- Šířka obrázku
-
-
- Image height
- Výška obrázku
-
-
- Use m&ultithreaded warping implementation
- Použít im&plementaci vícevláknové deformace
-
Raster tile index
@@ -6302,6 +4665,165 @@ Hodnota 'šedá' (z GDAL 1.7.0) dovoluje rozšířit dataset s barevno
Skip files with different projection ref
Přeskočit soubory s odlišnou projekcí
+
+ Translate (Convert format)
+ Převést na jiný formát
+
+
+ &Target SRS
+ &Cílový SRS
+
+
+ Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
+ Procento k změně velikosti obrázku. Změní poměr velikost pixelu/rozlišení obrázku následovně: 25% vytvoří obraz s pixely 4x většími.
+
+
+ Outsize
+ Nadměrně verlký
+
+
+ %
+ %
+
+
+ Assign a specified nodata value to output bands.
+ Přiřadí definovanou hodnotu nodata k výstupním pásmům.
+
+
+ To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
+ Pro vystavení datasetu s 1 pásmem s barevnou tabulkou jako datases se 3 (RGB) nebo 4 (RGBA) pásmy.
+Užitečné pro výstupní ovladače jako JPEG, JPEG2000, MrSID, ECW které nepodporují indexované datasety.
+Hodnota 'šedá' (z GDAL 1.7.0) dovoluje rozšířit dataset s barevnou tabulkou, který obsahuje jen úrovně šedi na dataset s indexovanou šedí.
+
+
+ Expand
+ Rozšířit
+
+
+ Gray
+ Šedá
+
+
+ RGB
+ RGB
+
+
+ RGBA
+ RGBA
+
+
+ Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
+ Vybere podokno ze zdrojového obrázku pro kopírování založené na umístění pixel/linie. (Zadejte Xoff Yoff Xvelikost Yvelikost)
+
+
+ Srcwin
+ Srcwin
+
+
+ Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
+ Vybere podokno ze zdrojového obrázku pro kopírování (jako -srcwin) ale s rohy zadanými v georeferencovaných souřadnicích. (Zadejte ulx uly lrx lry)
+
+
+ Prjwin
+ Prjwin
+
+
+ Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
+ Kopírovat všechny podskupiny datasetu do samostatných výstupních souborů. Použijte s formáty jako HDF nebo OGDI které mají podskupiny datasetu.
+
+
+ Sds
+ Sds
+
+
+ Warp (Reproject)
+ Změnit projekci
+
+
+ &Source SRS
+ &Zdrojový SRS
+
+
+ &Resampling method
+ &Metoda převzorkování
+
+
+ Near
+ Blízko
+
+
+ Bilinear
+ Bilineární
+
+
+ Cubic
+ Kubický
+
+
+ Cubic spline
+ Kubický spline
+
+
+ Lanczos
+ Lanczos
+
+
+ No data values
+ Hodnoty "žádná data"
+
+
+ &Memory used for caching
+ &Paměť použitá pro kešování
+
+
+ MB
+ MB
+
+
+ Use m&ultithreaded warping implementation
+ Použít im&plementaci vícevláknové deformace
+
+
+ &Output directory for contour lines (shapefile)
+ &Výstupní složka pro izolinie (shapefile)
+
GeometryDialog
@@ -6357,6 +4879,10 @@ Hodnota 'šedá' (z GDAL 1.7.0) dovoluje rozšířit dataset s barevno
Export/Add geometry columns
Exportovat/Přidat sloupce geometrie
+
+ Input vector layer
+ Vstupní vektorová vrstva
+
Layer CRS
SRS vrstvy
@@ -6369,48 +4895,6 @@ Hodnota 'šedá' (z GDAL 1.7.0) dovoluje rozšířit dataset s barevno
Ellipsoid
Elipsoid
-
- Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
-
- Error loading output shapefile:
-%s
- Chyba načítání výstupního shapefile:
-%s
-
-
- Created output shapefile:
-%s
-%s
-
-
- Created output shapefile:
-{0}
-{1}
-
-Would you like to add the new layer to the TOC?
- Vytvořen výstupní shapefile:
-{0}
-{1}
-
-Chcete přidat novou vrstvu do aktuálního mapového okna?
-
-
- Error loading output shapefile:
-{0}
- Chyba načítání výstupního shapefile:
-{0}
-
-
- Layer '{0}' updated
- Vrstva '{0}' aktualizována
-
-
- Simplify geometries
- Zjednodušit geometrie
-
Polygon centroids
Centroidy polygonů
@@ -6455,21 +4939,13 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Output polygon shapefile
Výstupní polygonový shapefile
-
- Geoprocessing
- Geoprocessing
-
Unable to delete existing shapefile.
Nemohu smazat existující shapefile.
- Currently QGIS doesn't allow simultaneous access from
- different threads to the same datasource. Make sure your layer's
- attribute tables are closed. Continue?
- QGIS momentálně nedovoluje současný přístup z
- různých vláken ke stejnému datovému zdroji. Ujistěte se, že atributové tabulky
- vaší vrstvy jsou uzavřené. Pokračovat?
+ Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
+
Cancel
@@ -6496,47 +4972,29 @@ Zvolte prosím jiné pole...
Jeden nebo více prvků ve výstupní vrstvě mohou mít neplatnou geometrii, zkontrolujte je prosím pomocí nástroje Zkontrolovat platnost
-
-
- Created output shapefile:
-%1
-%2
-
-Would you like to add the new layer to the TOC?
- Vytvořen výstupní shapefile:
-%1
-%2
-
-Chcete přidat novou vrstvu do aktuálního mapového okna?
-
-
- Created output shapefile:
-%1
-
-Would you like to add the new layer to the TOC?
- Vytvořen výstupní shapefile:
-%1
-
-Chcete přidat novou vrstvu do aktuálního mapového okna?
Error loading output shapefile:
-%1
- Chyba načítání výstupního shapefile:
-%1
+%s
+ Chyba načítání výstupního shapefile:
+%s
- Layer '%1' updated
- Vrstva '%1' aktualizována
+ Created output shapefile:
+%s
+%s
+ Vytvořen výstupní shapefile:
+%s
+%s
+
+
+ Layer '{0}' updated
+ Vrstva '{0}' aktualizována
Error writing output shapefile.
Chyba zápisu výstupního shapefile.
-
- Input vector layer
- Vstupní vektorová vrstva
-
GeoprocessingDialog
@@ -6608,14 +5066,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Intersect
Průsečík
-
- Symmetrical difference
-
-
- Symetrical difference
- Symetrický rozdíl
-
Clip layer
Oříznout vrstvu
@@ -6663,12 +5113,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
%s
Chyba načítání výstupního shapefile:
%s
-
-
- No output created. File creation error:
-%1
- Nevytvořen žádný výstup. Chyba vytvoření souboru:
-%1
@@ -6676,6 +5120,10 @@ Warnings:
Varování:
+
+ Symmetrical difference
+ Symetrický rozdíl
+
Some output geometries may be missing or invalid.
@@ -6688,14 +5136,6 @@ Chcete přesto přidat novou vrstvu?
-
-Would you like to add the new layer to the TOC?
-
-
-Chcete přidat novou vrstvu do aktuálního náhledu?
-
-
-
Input CRS error: Different input coordinate reference systems detected, results may not be as expected.
Chyba vstupního SRS: zjištěny rozdílné souřadnicové referenční systémy, výsledky mohou být jiné než předpokládané.
@@ -6718,27 +5158,9 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Chyba GEOS geoprocessingu: jeden nebo více vstupních prvků mají neplatnou geometrii.
-
- Created output shapefile:
-%1
-%2%3
- Vytvořen výstupní shapefile:
-%1
-%2%3
-
-
- Error loading output shapefile:
-%1
- Chyba načítání výstupního shapefile:
-%1
-
GlobePlugin
-
- Globe
- Glóbus
-
Launch Globe
@@ -6828,14 +5250,6 @@ Chyba GEOS geoprocessingu: jeden nebo více vstupních prvků mají neplatnou ge
Abort
Přerušit
-
- Point layer error
- Chyba bodové vrstvy
-
-
- Could not identify the vector data provider.
- Nemohu indentifikovat poskytovatele bodových dat.
-
Heatmap generation aborted
@@ -6892,23 +5306,11 @@ Chyba GEOS geoprocessingu: jeden nebo více vstupních prvků mají neplatnou ge
Heatmap Plugin
Zásuvný modul teplotní mapy
-
- Input Point Vector
- Vstupný bodový vektor
-
-
- Output Raster
- Výstupní rastr
-
...
...
-
- Output Format
- Formát výstupu
-
Input point layer
@@ -7019,56 +5421,13 @@ Chyba GEOS geoprocessingu: jeden nebo více vstupních prvků mají neplatnou ge
Add generated file to map
-
-
- Decay Ratio
- Rozpadový poměr
-
-
- 0.1
- 0.1
+ Přidat vytvořený soubor do mapy
Advanced
Pokročilé
-
- Row
- Řádek
-
-
- Cell Size X
- Velikost buňky X
-
-
- Column
- Sloupec
-
-
- Cell Size Y
- Velikost buňky Y
-
-
- Use Radius from field
- Použít poloměr z pole
-
-
- Use Weight from field
- Použít váhu z pole
-
-
-
- Help
-
- Dialog
- Dialog
-
-
- about:blank
- about:blank
-
HelpEditionDialog
@@ -7089,11 +5448,11 @@ Chyba GEOS geoprocessingu: jeden nebo více vstupních prvků mají neplatnou ge
Confirmation
- Potvrzení
Are you sure you want to clear log?
- Opravdu chcete smazat záznam?
Create test
@@ -7115,7 +5474,7 @@ Chyba GEOS geoprocessingu: jeden nebo více vstupních prvků mají neplatnou ge
Save
- Uložit
+ Uložit
@@ -7146,32 +5505,15 @@ Chyba GEOS geoprocessingu: jeden nebo více vstupních prvků mají neplatnou ge
MainWindow
- QGIS
- QGIS
-
-
- &Edit
&Editovat
-
- &File
- &Soubor
-
-
- &Open Recent Projects
- &Otevřít poslední projekt
-
Print Composers
Tvorba map
-
- New From Template
- Nový ze šablony
-
&View
@@ -7183,29 +5525,159 @@ Chyba GEOS geoprocessingu: jeden nebo více vstupních prvků mají neplatnou ge
Vybrat
- Measure
Měřit
- &Decorations
+ &Dekorace
+
+
+ &Layer
&Vrstva
- New
Nový
- &Plugins
+ Zásuvné &moduly
+
+
+ &Help
+ &Nápověda
+
+
+ &Settings
&Nastavení
- &Plugins
- Zásuvné &moduly
+ &Raster
+ &Rastr
+
+
+ Vect&or
+ Vekt&or
+
+
+ &OpenStreetMap
+ &OpenStreetMap
+
+
+ File
+ Soubor
+
+
+ Manage Layers
+ Spravovat vrstvy
+
+
+ Digitizing
+ Digitalizace
+
+
+ Advanced Digitizing
+ Pokročilá digitalizace
+
+
+ Map Navigation
+ Navigace v mapě
+
+
+ Attributes
+ Atributy
+
+
+ Plugins
+ Zásuvné moduly
+
+
+ Help
+ Nápověda
+
+
+ Raster
+ Rastr
+
+
+ Label
+ Popisek
+
+
+ Vector
+ Vektor
+
+
+ Database
+ Databáze
+
+
+ Web
+ Web
+
+
+ Ctrl+N
+ Ctrl+N
+
+
+ Ctrl+O
+ Ctrl+O
+
+
+ Ctrl+S
+ Ctrl+S
+
+
+ Ctrl+Shift+S
+ Ctrl+Shift+S
+
+
+ Save as Image...
+ Uložit jako obrázek...
+
+
+ &New Print Composer
+ &Nový tvůrce mapy
+
+
+ Ctrl+P
+ Ctrl+P
+
+
+ Composer Manager...
+ Správce tvůrců mapy...
&Otevřít nedávný
- &Decorations
- &Dekorace
+ New From Template
+ Nový ze šablony
- &Raster
- &Rastr
+ Preview Mode
+ Režim náhledu
- &Help
- &Nápověda
-
-
- New Project From Template
- Nový projekt ze šablony
-
-
- Vect&or
- Vekt&or
-
-
- &OpenStreetMap
- &OpenStreetMap
-
-
- Paste Features as
- Vložit prvky jako
- File
- Soubor
+ &New
+ &Nové
- Manage Layers
- Spravovat vrstvy
+ &Open...
+ &Otevřít...
- Digitizing
- Digitalizace
+ &Save
+ &Uložit
- Advanced Digitizing
- Pokročilá digitalizace
+ Save &As...
+ Uložit &jako...
- Map Navigation
- Navigace v mapě
-
-
- Attributes
- Atributy
-
-
- Plugins
- Zásuvné moduly
-
-
- Help
- Nápověda
-
-
- Raster
- Rastr
-
-
- Label
- Popisek
-
-
- Vector
- Vektor
-
-
- Database
- Databáze
-
-
- Web
- Web
-
-
- &New Project
- &Nový projekt
-
-
- Ctrl+N
- Ctrl+N
-
-
- &Open Project...
- &Otevřít projekt...
-
-
- Ctrl+O
- Ctrl+O
-
-
- &Save Project
- &Uložit projekt
-
-
- Ctrl+S
- Ctrl+S
-
-
- Save Project &As...
- Uložit projekt &jako...
-
-
- Ctrl+Shift+S
- Ctrl+Shift+S
-
-
- Save as Image...
- Uložit jako obrázek...
-
-
- &New Print Composer
- &Nový tvůrce mapy
-
-
- Ctrl+P
- Ctrl+P
-
-
- Composer Manager...
- Správce tvůrců mapy...
-
-
- Exit QGIS
Ukončit QGIS
- Ctrl+Q
+ Ctrl+Q
+
+
+ &Undo
+ &Zpět
+
+
+ Ctrl+Z
+ Ctrl+Z
+
+
+ &Redo
+ &Znovu
+
+
+ Ctrl+Shift+Z
+ Ctrl+Shift+Z
+
+
+ Cut Features
+ Vyjmout prvky
+
+
+ Ctrl+X
+ Ctrl+X
+
+
+ Copy Features
+ Kopírovat prvky
+
+
+ Ctrl+C
+ Crtl+C
+
+
+ Paste Features
+ Vložit prvky
+
+
+ Ctrl+V
+ Ctrl+V
+
+
+ Add Feature
Přidat prvek
- Split Parts
- Ctrl+.
+ Ctrl+.
- Move Feature(s)
+ Přesunout prvek/prvky
+
+
+ Reshape Features
+ Změnit tvar prvků
+
+
+ Split Features
+ Rozdělit objekt
+
+
+ Split Parts
+ Rozdělit části
+
+
+ Delete Selected
+ Vymazat vybrané
+
+
+ Add Ring
+ Přidat prstenec
+
+
+ Add Part
+ Přidat část
+
+
+ Simplify Feature
+ Zjednodušit prvek
+
+
+ Delete Ring
+ Smazat prstenec
+
+
+ Delete Part
+ Smazat část
+
+
+ Merge Selected Features
Sloučit vybrané prvky
- Merge Attributes of Selected Features
Sloučit atributy vybraných prvků
+ Node Tool
+ Nástroj uzlů
+
+
+ Rotate Point Symbols
+ Rotovat symboly bodů
+
+
+ Snapping Options...
+ Možnosti přichytávání...
+
+
+ Pan Map
+ Posunout mapu
+
+
+ Zoom In
+ Přiblížit
+
+
+ Ctrl++
+ Ctrl++
+
+
+ Zoom Out
+ Oddálit
+
+
+ Ctrl+-
+ Ctrl+-
+
+
+ Select Single Feature
- Vybrat jeden prvek
+ Vybrat jeden prvek
+ Select Features by Rectangle
- Vybrat prvky obdélníkem
+ Vybrat prvky obdélníkem
- Select Features by Polygon
Vybrat prvky polygonem
- Select Features by Freehand
Vybrat prvky kreslením od ruky
- Select Features by Radius
Vybrat prvky poloměrem
- Deselect Features from All Layers
Zrušit výběr prvků ve všech vrstvách
- F5
- F5
+ Identify Features
+ Identifikovat prvky
- Ctrl+Shift+I
+ Ctrl+Shift+I
+
+
+ Measure Line
+ Měřit linii
+
+
+ Ctrl+Shift+M
+ Ctrl+Shift+M
+
+
+ Measure Area
+ Měřit plochu
+
+
+ Ctrl+Shift+J
+ Ctrl+Shift+J
+
+
+ Measure Angle
+ Měřit úhel
+
+
+ Zoom Full
+ Přiblížit na rozměry okna
+
+
+ Ctrl+Shift+F
+ Ctrl+Shift+F
+
+
+ Zoom to Layer
+ Přiblížit na vrstvu
+
+
+ Zoom to Selection
+ Přiblížit na výběr
+
+
+ Ctrl+J
+ Ctrl+J
+
+
+ Zoom Last
+ Zvětšit podle posledního výřezu
+
+
+ Zoom Next
+ Přiblížit na další
+
+
+ Zoom Actual Size
+ Zvětšit aktuální velikost
+
+
+ Zoom to Native Pixel Resolution
+ Přiblížit na nativní rozlišení
+
+
+ Map Tips
+ Mapové tipy
+
+
+ Show information about a feature when the mouse is hovered over it
+ Ukazuje informace o objektech po jejich přejetí myší
+
+
+ New Bookmark...
+ Nová záložka...
+
+
+ Ctrl+B
+ Ctrl+B
+
+
+ Show Bookmarks
+ Zobrazit záložky
+
+
+ Ctrl+Shift+B
+ Ctrl+Shift+B
+
+
+ Refresh
+ Obnovit
+
+
+ Text Annotation
+ Textová anotace
+
+
+ Form Annotation
Anotace formuláře
- Move Annotation
+ Přesunout anotaci
+
+
+ Labeling
+ Tvorba popisků
+
+
+ Layer Labeling Options
Možnosti popisků vrstvy
- New Shapefile Layer...
+ Nová Shapefile vrstva...
+
+
+ Ctrl+Shift+N
+ Ctrl+Shift+N
+
+
+ New SpatiaLite Layer ...
+ Nová vrstva SpatiaLite ...
+
+
+ Ctrl+Shift+A
+ Ctrl+Shift+A
+
+
+ Raster calculator ...
+ Rastrový kalkulátor ...
+
+
+ Add Vector Layer...
+ Přidat vektorovou vrstvu...
+
+
+ Ctrl+Shift+V
+ Ctrl+Shift+V
+
+
+ Add Raster Layer...
+ Přidat rastrovou vrstvu...
+
+
+ Ctrl+Shift+R
+ Ctrl+Shift+R
+
+
+ Add PostGIS Layers...
Přidat PostGIS Layers...
- Ctrl+Shift+D
+ Ctrl+Shift+D
+
+
+ Add SpatiaLite Layer...
+ Přidat vrstvu SpatiaLite...
+
+
+ Ctrl+Shift+L
+ Ctrl+Shift+L
+
+
+ Add MSSQL Spatial Layer...
+ Přidat vrstvu MSSQL...
+
+
+ Add Oracle Spatial Layer...
Přidat Oracle Spatial Layer...
- Ctrl+Shift+O
+ Ctrl+Shift+O
+
+
+ Add WMS/WMTS Layer...
+
+
+ Ctrl+Shift+W
+ Ctrl+Shift+W
+
+
+ Open Attribute Table
+ Otevřít atributovou tabulku
+
+
+ Toggle Editing
Přepnout editaci
- Manage and Install Plugins...
- Spravovat a instalovat zásuvné moduly...
+ Toggles the editing state of the current layer
+ Změnit u aktuální vrstvy stav editace
- F11
- F11
+ Save for Selected Layer(s)
+ Uložit pro Vybrané vrstvy
- Duplicate Layer(s)
- Duplikovat vrstvu/vrstvy
+ Save edits to current layer, but continue editing
+ Uložit úpravy do aktuální vrstvy, ale pokračovat v editaci
- SVG annotation
- SVG anotace
-
-
- Save for All Layers
- Uložit pro Všechny vrstvy
-
-
- Rollback for All Layers
- Rollback pro Všechny vrstvy
-
-
- Cancel for All Layers
- Zrušit pro Všechny vrstvy
-
-
- Rollback for Selected Layer(s)
- Rollback pro Vybrané vrstvy
-
-
- Current Edits
- Aktuální změny
-
-
- Cancel for Selected Layer(s)
- Zrušit pro Vybrané vrstvy
-
-
- Save Layer Edits
- Uložit změny vrstvy
-
-
- Rotate Feature(s)
- Rotovat prvek/prvky
-
-
- &Download data
- &Stáhnout data
-
-
- &Import topology from XML
- &Importovat topologii z XML
-
-
- &Export topology to SpatiaLite
- &Exportovat topologii do SpatiaLite
-
-
- Increase brightness
- Zvýšit jas
-
-
- Decrease brightness
- Snížit jas
-
-
- Increase contrast
- Zvýšit kontrast
-
-
- Decrease contrast
- Snížit kontrast
-
-
- Select By Expression
- Vybrat pomocí vzorce
-
-
- Select features using an expression
- Vybrat prvky pomocí vzorce
-
-
- Need commercial support?
-
-
- DXF Export...
-
-
- Fill Ring
-
-
- Add from Layer Definition File...
-
-
- Save As Layer Definition File...
-
-
- Normal
- Normální
-
-
- Normal preview mode
-
-
- Simulate Photocopy (Grayscale)
-
-
- Simulate photocopy (grayscale)
-
-
- Simulate Fax (Mono)
-
-
- Simulate fax (mono)
-
-
- Simulate Color Blindness (Protanope)
-
-
- Simulate color blindness (protanope)
-
-
- Simulate Color Blindness (Deuteranope)
-
-
- Simulate color blindness (deuteranope)
-
-
- Set Scale Visibility of Layer(s)
-
-
- Need Support?
- Potřebujete podporu?
-
-
- Open Field Calculator
- Otevřít kalkulačku polí
-
-
- Add Delimited Text Layer...
- Přidat vrstvu s odděleným textem...
-
-
- Add Delimited Text Layer
- Přidat vrstvu s odděleným textem
-
-
- New Vector Layer
- Nová vektorová vrstva
-
-
- Paste features in clipboard into a new OGR vector layer.
-
-
- New Memory Vector Layer
-
-
- Paste features in clipboard into a new memory vector layer.
-
-
- Save Edits
- Uložit úpravy
-
-
- Save As...
Uložit jako...
- Save Selection as Vector File...
- Uložit výběr jako vektorový soubor...
+ Add from Layer Definition File...
+ Přidat ze souboru definice vrstvy...
- Save As Layer Definition File...
+ Uložit jako soubor definice vrstvy...
+
+
+ Normal
+ Normální
+
+
+ Normal preview mode
+ Normální režim náhledu
+
+
+ Simulate Photocopy (Grayscale)
+ Simulovat fotokopii (stupně šedi)
+
+
+ Simulate photocopy (grayscale)
+ Simulovat fotokopii (stupně šedi)
+
+
+ Simulate Fax (Mono)
+ Simulovat fax (1 barva)
+
+
+ Simulate fax (mono)
+ Simulovat fax (1 barva)
+
+
+ Simulate Color Blindness (Protanope)
+ Simulovat barvoslepost (protanopie - nevidí červenou)
+
+
+ Simulate color blindness (protanope)
+ Simulovat barvoslepost (protanopie - nevidí červenou)
+
+
+ Simulate Color Blindness (Deuteranope)
+ Simulovat barvoslepost (deuteranopie - nevidí zelenou)
+
+
+ Simulate color blindness (deuteranope)
+ Simulovat barvoslepost (deuteranopie - nevidí zelenou)
+
+
+ Set Scale Visibility of Layer(s)
+ Nastavit měřítko viditelnosti vrstvy/ev
+
+
+ Remove Layer(s)
+ Odstranit vrstvu(y)
+
+
+ Ctrl+D
+ Ctrl+D
+
+
+ Set CRS of Layer(s)
+ Nastavit SRS vrstvy/vrstev
+
+
+ Ctrl+Shift+C
+ Ctrl+Shift+C
+
+
+ Set Project CRS from Layer
Nastavit SRS z vrstvy
- Properties...
+ Možnosti...
+
+
+ Query...
+ Dotaz...
+
+
+ Add to Overview
+ Přidat do náhledu
+
+
+ Add All to Overview
+ Přidat vše do náhledu
+
+
+ Remove All from Overview
+ Odstranit vše z náhledu
+
+
+ Show All Layers
+ Zobrazit všechny vrstvy
+
+
+ Ctrl+Shift+U
+ Ctrl+Shift+U
+
+
+ Hide All Layers
+ Skrýt všechny vrstvy
+
+
+ Ctrl+Shift+H
+ Ctrl+Shift+H
+
+
+ Manage and Install Plugins...
+ Spravovat a instalovat zásuvné moduly...
+
+
+ Open Field Calculator
+ Otevřít kalkulačku polí
+
+
+ Add Delimited Text Layer...
+ Přidat vrstvu s odděleným textem...
+
+
+ Add Delimited Text Layer
+ Přidat vrstvu s odděleným textem
+
+
+ New Vector Layer
+ Nová vektorová vrstva
+
+
+ Paste features in clipboard into a new OGR vector layer.
+
+
+ New Memory Vector Layer
+
+
+ Paste features in clipboard into a new memory vector layer.
+
+
+ Toggle Full Screen Mode
+ Přepnout režim celé obrazovky
+
+
+ F5
+ F5
+
+
+ Ctrl+F
+ Ctrl+F
+
+
+ F11
+ F11
+
+
+ Project Properties...
+ Vlastnosti projektu...
+
+
+ Ctrl+Shift+P
+ Ctrl+Shift+P
+
+
+ Options...
+ Volby...
+
+
+ Custom CRS...
+ Uživatelský SRS...
+
+
+ Configure shortcuts...
+ Nastavit zástupce...
+
+
+ Local Histogram Stretch
+ Lokální roztažení histogramu
+
+
+ Stretch histogram of active raster to view extents
+ Roztažení histogramu aktivního rastru na rozsahy zobrazení
+
+
+ Help Contents
+ Obsah nápovědy
+
+
+ F1
+ F1
+
+
+ API documentation
+ API dokumentace
+
+
+ QGIS Home Page
+ Domovská stránka QGISu
+
+
+ Ctrl+H
+ Ctrl+H
+
+
+ Check QGIS Version
+ Zkontrolovat verzi QGISu
+
+
+ Check if your QGIS version is up to date (requires internet access)
+ Zkontrolovat zda je možné aktualizovat vaší verzi QGISu (vyžaduje připojení k Internetu)
+
+
+ About
+ O programu
+
+
+ QGIS Sponsors
+ Sponzoři QGISu
+
+
+ Move Label
+ Přesunout popisek
+
+
+ Rotate Label
+ Rotovat popisek
+
+
+ Rotate Label
Ctl (Cmd) increments by 15 deg.
Rotovat popisek
Ctl (Cmd) po 15 stupních.
- Change Label
+ Změnit popisek
+
+
+ Style Manager...
+ Správce stylů...
+
+
+ Python Console
+ Python konzole
+
+
+ Full histogram stretch
+ Celkové roztažení histogramu
+
+
+ Stretch Histogram to Full Dataset
+ Roztáhnout histogram na celý dataset
+
+
+ Customization...
+ Přizpůsobení...
+
+
+ This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
+ Toto je zde jen pro zabránění konfliktům s klávesovými zkratkami, klávesová zkratka je zachycena v QgsCustomization
+
+
+ Ctrl+M
+ Ctrl+M
+
+
+ Embed Layers and Groups...
Přiložit vrstvy a skupiny...
- Embed layers and groups from other project files
+ Připojit vrstvy a skupiny z jiných souborů projektů
+
+
+ &Copyright Label
+ &Značka copyrightu
+
+
+ Creates a copyright label that is displayed on the map canvas.
+ Vytvoří štítek copyrightu, který bude zobrazen na mapovém platně.
+
+
+ &North Arrow
+ &Směrová růžice
+
+
+ "Creates a north arrow that is displayed on the map canvas"
+ "Vytvoří symbol severky, který bude zobrazen na mapovém platně"
+
+
+ &Scale Bar
+ &Měřítko
+
+
+ Creates a scale bar that is displayed on the map canvas
+ Vytvoří měřítko a zobrazí jej v mapovém okně
+
+
+ Add WFS Layer...
+ Přidat vrstvu WFS...
+
+
+ Add WFS Layer
+ Přidat vrstvu WFS
+
+
+ Feature Action
+ Akce prvku
+
+
+ Run Feature Action
Spustit akci prvku
- Pan Map to Selection
+ Posunout mapu na výběr
+
+
+ Touch zoom and pan
Posun a přiblížení dotykem
- Offset Curve
Odsazení křivky
- Copy style
Kopírovat styl
- Paste style
Vložit styl
- Add WCS Layer...
Přidat vrstvu WCS...
- &Grid
&Mřížka
- Grid
Mřížka
- Pin/Unpin Labels
Připíchnout/Uvolnit popisky
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -7778,44 +6639,44 @@ Shift uvolní, Ctl (Cmd) přepne stav
Funguje pro všechny editovatelné vrstvy
- Highlight Pinned Labels
Zvýraznit připíchnuté popisky
- New Blank Project
Nový prázdný projekt
- Local Cumulative Cut Stretch
Cumulative Cut Stretch lokální
- Local cumulative cut stretch using current extent, default limits and estimated values.
Lokální cumulative cut stretch s použitím aktuálního rozsahu, výchozí limity a odhadnuté hodnoty.
- Full Dataset Cumulative Cut Stretch
Cumulative Cut Stretch pro celý dataset
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Cumulative cut stretch s použitím rozsahu celého datasetu, výchozí limity a odhadnuté hodnoty.
- Show/Hide Labels
Zobrazit/skrýt popisky
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -7826,808 +6687,130 @@ Shift+klik nebo ohraničení popisku skryje popisek
Funguje pro všechny editovatelné vrstvy
- Html Annotation
Html anotace
- Composer manager...
- Správce tvorby map...
+ Duplicate Layer(s)
+ Duplikovat vrstvu/vrstvy
- Exit
- Konec
+ SVG annotation
+ SVG anotace
- Ctrl+Q
- Ctrl+Q
+ Save for All Layers
+ Uložit pro Všechny vrstvy
- &Undo
- &Zpět
+ Rollback for All Layers
+ Rollback pro Všechny vrstvy
- Ctrl+Z
- Ctrl+Z
+ Cancel for All Layers
+ Zrušit pro Všechny vrstvy
- &Redo
- &Znovu
+ Rollback for Selected Layer(s)
+ Rollback pro Vybrané vrstvy
- Ctrl+Shift+Z
- Ctrl+Shift+Z
+ Current Edits
+ Aktuální změny
- Cut Features
- Vyjmout prvky
+ Cancel for Selected Layer(s)
+ Zrušit pro Vybrané vrstvy
- Ctrl+X
- Ctrl+X
+ Save Layer Edits
+ Uložit změny vrstvy
- Copy Features
- Kopírovat prvky
+ Rotate Feature(s)
+ Rotovat prvek/prvky
- Ctrl+C
- Crtl+C
+ &Download data
+ &Stáhnout data
- Paste Features
- Vložit prvky
+ &Import topology from XML
+ &Importovat topologii z XML
- Ctrl+V
- Ctrl+V
+ &Export topology to SpatiaLite
+ &Exportovat topologii do SpatiaLite
- Capture Point
- Umístit bod
+ Increase brightness
+ Zvýšit jas
- Ctrl+.
- Ctrl+.
+ Decrease brightness
+ Snížit jas
- Capture Line
- Umístit linii
+ Increase contrast
+ Zvýšit kontrast
- Ctrl+/
- Ctrl+/
+ Decrease contrast
+ Snížit kontrast
- Capture Polygon
- Umístit polygon
+ Select By Expression
+ Vybrat pomocí vzorce
- Ctrl+?
- Ctrl+?
+ Select features using an expression
+ Vybrat prvky pomocí vzorce
- Add feature
- Přidat prvek
+ Need commercial support?
+ Potřebujete komerční podporu?
- Move Feature(s)
- Přesunout prvek/prvky
+ DXF Export...
+ DXF Export...
- Reshape Features
- Změnit tvar prvků
-
-
- Split Features
- Rozdělit objekt
-
-
- Delete Selected
- Vymazat vybrané
-
-
- Add Ring
- Přidat prstenec
-
-
- Add Part
- Přidat část
-
-
- Simplify Feature
- Zjednodušit prvek
-
-
- Delete Ring
- Smazat prstenec
-
-
- Delete Part
- Smazat část
-
-
- Merge selected features
- Sloučit vybrané prvky
-
-
- Merge attributes of selected features
- Sloučit atributy vybraných prvků
-
-
- Node Tool
- Nástroj uzlů
-
-
- Rotate Point Symbols
- Rotovat symboly bodů
-
-
- Snapping Options...
- Možnosti přichytávání...
-
-
- Pan Map
- Posunout mapu
-
-
- Zoom In
- Přiblížit
-
-
- Ctrl++
- Ctrl++
-
-
- Zoom Out
- Oddálit
-
-
- Ctrl+-
- Ctrl+-
-
-
- Select single feature
- Vybrat jeden prvek
-
-
- Select features by rectangle
- Vybrat prvky obdélníkem
-
-
- Select features by polygon
- Vybrat prvky polygonem
-
-
- Select features by freehand
- Vybrat prvky od ruky
-
-
- Select features by radius
- Vybrat prvky poloměrem
-
-
- Deselect features from all layers
- Zrušit výběr prvků ve všech vrstvách
-
-
- Identify Features
- Identifikovat prvky
-
-
- Ctrl+Shift+I
- Ctrl+Shift+I
-
-
- Measure Line
- Měřit linii
-
-
- Ctrl+Shift+M
- Ctrl+Shift+M
-
-
- Measure Area
- Měřit plochu
-
-
- Ctrl+Shift+J
- Ctrl+Shift+J
-
-
- Measure Angle
- Měřit úhel
-
-
- Zoom Full
- Přiblížit na rozměry okna
-
-
- Ctrl+Shift+F
- Ctrl+Shift+F
-
-
- Zoom to Layer
- Přiblížit na vrstvu
-
-
- Zoom to Selection
- Přiblížit na výběr
-
-
- Ctrl+J
- Ctrl+J
-
-
- Zoom Last
- Zvětšit podle posledního výřezu
-
-
- Zoom Next
- Přiblížit na další
-
-
- Zoom Actual Size
- Zvětšit aktuální velikost
-
-
- Zoom to Native Pixel Resolution
- Přiblížit na nativní rozlišení
-
-
- Map Tips
- Mapové tipy
-
-
- Show information about a feature when the mouse is hovered over it
- Ukazuje informace o objektech po jejich přejetí myší
-
-
- New Bookmark...
- Nová záložka...
-
-
- Ctrl+B
- Ctrl+B
-
-
- Show Bookmarks
- Zobrazit záložky
-
-
- Ctrl+Shift+B
- Ctrl+Shift+B
-
-
- Refresh
- Obnovit
-
-
- Ctrl+R
- Ctrl+R
-
-
- Text Annotation
- Textová anotace
-
-
- Form annotation
- Formulářová anotace
-
-
- Move Annotation
- Přesunout anotaci
-
-
- Labeling
- Tvorba popisků
-
-
- New Shapefile Layer...
- Nová Shapefile vrstva...
-
-
- Ctrl+Shift+N
- Ctrl+Shift+N
-
-
- New SpatiaLite Layer ...
- Nová vrstva SpatiaLite ...
-
-
- Ctrl+Shift+A
- Ctrl+Shift+A
-
-
- Raster calculator ...
- Rastrový kalkulátor ...
-
-
- Add Vector Layer...
- Přidat vektorovou vrstvu...
-
-
- Ctrl+Shift+V
- Ctrl+Shift+V
-
-
- Add Raster Layer...
- Přidat rastrovou vrstvu...
-
-
- Ctrl+Shift+R
- Ctrl+Shift+R
-
-
- Add PostGIS Layer...
- Přidat vrstvu PostGIS...
-
-
- Ctrl+Shift+D
- Ctrl+Shift+D
-
-
- Add SpatiaLite Layer...
- Přidat vrstvu SpatiaLite...
-
-
- Ctrl+Shift+L
- Ctrl+Shift+L
-
-
- Add MSSQL Spatial Layer...
- Přidat vrstvu MSSQL...
-
-
- Add WMS/WMTS Layer...
- Přidat vrstvu WMS...
-
-
- Ctrl+Shift+W
- Ctrl+Shift+W
-
-
- Open Attribute Table
- Otevřít atributovou tabulku
-
-
- Toggle editing
- Přepnout editaci
-
-
- Toggles the editing state of the current layer
- Změnit u aktuální vrstvy stav editace
-
-
- Save edits
- Uložit změny
-
-
- Save edits to current layer, but continue editing
- Uložit úpravy do aktuální vrstvy, ale pokračovat v editaci
-
-
- Save as...
- Uložit jako...
-
-
- Save Selection as vector file...
- Uložit výběr jako vektorový soubor...
-
-
- Remove Layer(s)
- Odstranit vrstvu(y)
-
-
- Ctrl+D
- Ctrl+D
-
-
- Set CRS of Layer(s)
- Nastavit SRS vrstvy/vrstev
-
-
- Ctrl+Shift+C
- Ctrl+Shift+C
-
-
- Set project CRS from layer
- Nastavit SRS projektu z vrstvy
-
-
- Tile scale slider
- Posuvník měřítka dlaždice
-
-
- Remove All from Overview
- Odstranit vše z náhledu
-
-
- Style Manager...
- Správce stylů...
-
-
- Stretch Histogram to Full Dataset
- Roztáhnout histogram na celý dataset
-
-
- Customization...
- Přizpůsobení...
-
-
- mActionCatchForCustomization
- mActionCatchForCustomization
-
-
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
- Toto je zde jen pro zabránění konfliktům s klávesovými zkratkami, klávesová zkratka je zachycena v QgsCustomization
-
-
- Ctrl+M
- Ctrl+M
-
-
- Embed layers and groups from other project files
- Připojit vrstvy a skupiny z jiných souborů projektů
-
-
- &Copyright Label
- &Značka copyrightu
-
-
- Creates a copyright label that is displayed on the map canvas.
- Vytvoří štítek copyrightu, který bude zobrazen na mapovém platně.
-
-
- &North Arrow
- &Směrová růžice
-
-
- "Creates a north arrow that is displayed on the map canvas"
- "Vytvoří symbol severky, který bude zobrazen na mapovém platně"
-
-
- &Scale Bar
- &Měřítko
-
-
- Creates a scale bar that is displayed on the map canvas
- Vytvoří měřítko a zobrazí jej v mapovém okně
-
-
- Add WFS Layer...
- Přidat vrstvu WFS...
-
-
- Add WFS Layer
- Přidat vrstvu WFS
-
-
- Feature Action
- Akce prvku
-
-
- Pan Map to Selection
- Posunout mapu na výběr
-
-
- Live GPS tracking
- Živé GPS sledování
-
-
- Properties...
- Možnosti...
-
-
- Query...
- Dotaz...
-
-
- Add to Overview
- Přidat do náhledu
-
-
- Ctrl+Shift+O
- Ctrl+Shift+O
-
-
- &New
- &Nové
-
-
- &Open...
- &Otevřít...
-
-
- &Save
- &Uložit
-
-
- Save &As...
- Uložit &jako...
-
-
- Save for Selected Layer(s)
- Uložit pro Vybrané vrstvy
-
-
- Add All to Overview
- Přidat vše do náhledu
-
-
- Remove All From Overview
- Odebrat vše z náhledu
-
-
- Show All Layers
- Zobrazit všechny vrstvy
-
-
- Ctrl+Shift+U
- Ctrl+Shift+U
-
-
- Hide All Layers
- Skrýt všechny vrstvy
-
-
- Ctrl+Shift+H
- Ctrl+Shift+H
-
-
- Manage Plugins...
- Spravovat zásuvné moduly...
-
-
- Toggle Full Screen Mode
- Přepnout režim celé obrazovky
-
-
- Ctrl+F
- Ctrl+F
-
-
- Preview Mode
-
-
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- Project Properties...
- Vlastnosti projektu...
-
-
- Ctrl+Shift+P
- Ctrl+Shift+P
-
-
- Options...
- Volby...
-
-
- Custom CRS...
- Uživatelský SRS...
-
-
- Configure shortcuts...
- Nastavit zástupce...
-
-
- Local Histogram Stretch
- Lokální roztažení histogramu
-
-
- Stretch histogram of active raster to view extents
- Roztažení histogramu aktivního rastru na rozsahy zobrazení
-
-
- Help Contents
- Obsah nápovědy
-
-
- F1
- F1
-
-
- API documentation
- API dokumentace
-
-
- QGIS Home Page
- Domovská stránka QGISu
-
-
- Ctrl+H
- Ctrl+H
-
-
- Check QGIS Version
- Zkontrolovat verzi QGISu
-
-
- Check if your QGIS version is up to date (requires internet access)
- Zkontrolovat zda je možné aktualizovat vaší verzi QGISu (vyžaduje připojení k Internetu)
-
-
- About
- O programu
-
-
- QGIS Sponsors
- Sponzoři QGISu
-
-
- Move Label
- Přesunout popisek
-
-
- Rotate Label
- Rotovat popisek
-
-
- Change Label
- Změnit popisek
-
-
- Style manager...
- Správce stylů...
-
-
- Python Console
- Python konzole
-
-
- Full histogram stretch
- Celkové roztažení histogramu
-
-
- Stretch histogram to full dataset
- Roztažení histogramu na celý dataset
+ Fill Ring
+ Vyplnit prstenec
@@ -8635,76 +6818,76 @@ Funguje pro všechny editovatelné vrstvy
Manage connections
- Spravovat připojení
+ Spravovat připojení
Save to file
- Uložit do souboru
+ Uložit do souboru
Browse
- Procházet
+ Procházet
Load from file
- Načíst ze souboru
+ Načíst ze souboru
Load
- Načíst
+ Načíst
Save
- Uložit
+ Uložit
eXtensible Markup Language (*.xml *.XML)
- eXtensible Markup Language (*.xml *.XML)
Save connections
- Uložit připojení
+ Uložit připojení
Load connections
- Načíst připojení
+ Načíst připojení
Save Connections
- Uložit připojení
Saved to %s
- Uloženo do %s
File %s exists. Overwrite?
- Soubor %s existuje. Přepsat?
Loading Connections
- Načítám připojení
MetaSearch
MetaSearch plugin
- Zásuvný modul MetaSearch
Search Metadata Catalogues
- Prohledávat katalogy metadat
MetaSearch plugin help
- Nápověda modulu MetaSearch
Get Help on MetaSearch
- Získat nápovědu k MetaSearch
@@ -8712,358 +6895,322 @@ Funguje pro všechny editovatelné vrstvy
MetaSearch
- MetaSearch
Search
- Hledat
+ Hledat
Find
- Najít
+ Najít
Set global
- Nastavit globálně
Map extent
- Rozsah mapy
+ Rozsah mapy
-180
- -180
+ -180
90
- 90
+ 90
Records
- Záznamů
-90
- -90
+ -90
180
- 180
+ 180
From
- Od
Keywords
- Klíčová slova
+ Klíčová slova
Results
- Výsledky
+ Výsledky
>
- >
+ >
<<
- <<
Add WCS
- Přidat WCS
Add WMS/WMTS
- Přidat WMS/WMTS
<
- <
+ <
Add WFS
- Přidat WFS
Abstract
- Abstrakt
+ Abstrakt
Double click to see full record information
- Dvojklik pro zobrazení všech informací záznamu
Type
- Typ
+ Typ
Title
- Nadpis
View search results as XML
- Zobrazit výsledky hledání jako XML
>>
- >>
Services
- Služby
Service info
- Info o službě
GetCapabilities response
- Odezva GetCapabilities
New
- Nový
Edit
- Upravit
+ Upravit
Delete
- Smazat
+ Smazat
Save
- Uložit
+ Uložit
Add default services
- Přidat výchozí služby
Load
- Načíst
+ Načíst
Settings
- Nastavení
+ Nastavení
Connection naming
- Pojmenování připojení
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
- Načítám připojení
+
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
ModelerDialog
-
- Edit model help
- Upravit nápovědu modelu
-
-
- Run
- Spustit
-
-
- Execute current model
- Spustit aktuální model
-
-
- Open
- Otevřít
-
-
- Open existing model
- Otevřít aktuální model
-
-
- Save
- Uložit
-
-
- Save current model
- Uložit aktuální model
-
-
- Save as ...
- Uložit jako...
-
-
- Save current model as
- Uložit aktuální model jako
-
Search...
Hledat...
Message
- Zpráva
+ Zpráva
There are unsaved changes in model. Close modeler without saving?
- V modelu jsou neuložené změny. Zavřít modeláře bez uložení?
Empty model
@@ -9071,29 +7218,11 @@ Funguje pro všechny editovatelné vrstvy
Save Model As Image
- Uložit model jako obrázek
PNG files (*.png *.PNG)
-
-
- Unable to save edits. Reason:
- %s
-
-
- This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
-
- The selected model could not be loaded.
-See the log for more information.
-
-
- Model doesn't contains any algorithms and/or parameters and can't be executed
- Model neobsahuje žádné spustitelné algoritmy a/nebo parametry
+ PNG soubory (*.png *.PNG)
Warning
@@ -9109,11 +7238,7 @@ See the log for more information.
Processing models (*.model)
-
-
- SEXTANTE models (*.model)
- SEXTANTE modey (*.model)
+ Modely zpracování (*.model)
I/O error
@@ -9121,21 +7246,21 @@ See the log for more information.
Unable to save edits. Reason:
- %1
- Nemohu uložit změny. Důvod:
- %1
+ %s
+ Nemohu uložit změny. Důvod:
+ %s
Can't save model
Nemohu uložit model
- This model can't be saved in its original location
-(probably you do not have permission to do it).
-Please, use the 'Save as...' option.
- Tento model nemohl být uložen do původního umístění
-(zřejmě nemáte k tomu oprávnění).
-Použijte prosím volbu 'Uložit jako...'.
+ Model doesn't contains any algorithms and/or parameters and can't be executed
+ Model neobsahuje žádné spustitelné algoritmy a/nebo parametry
+
+
+ This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
+ Tento model nemohl být uložen do původního umístění (zřejmě nemáte k tomu oprávnění). Použijte prosím volbu 'Uložit jako...'.
Model saved
@@ -9155,9 +7280,9 @@ Použijte prosím volbu 'Uložit jako...'.
The selected model could not be loaded.
-Wrong line: %1
- Vybraný model nemohl být načten.
-Chybný řádek: %1
+Wrong line: %s
+ Vybraný model nemohl být načten.
+Chybný řádek: %s
Parameters
@@ -9168,15 +7293,15 @@ Chybný řádek: %1
MultipleInputDialog
Select all
- Vybrat vše
+ Vybrat vše
Clear selection
- Vyčistit výběr
+ Vyčistit výběr
Toggle selection
- Přepnout výběr
@@ -9184,29 +7309,29 @@ Chybný řádek: %1
Create a new Catalogue connection
- Vytvořit nové katalogové připojení
Name
- Název
URL
- URL
+ URL
Save connection
- Uložit připojení
+ Uložit připojení
Both Name and URL must be provided
- Musí být poskytnut jak Název tak URL
Overwrite %s?
- Přepsat %s?
@@ -9220,129 +7345,71 @@ Chybný řádek: %1
NumberInputDialog
[Enter your formula here]
- [Zadejte svůj vzorec zde]
Values from data layers extents
- Hodnoty z rozsahů datových vrstev
Min X
- Min X
Max X
- Max X
Min Y
- Min Y
Max Y
- Max Y
Cellsize
- Velikost buňky
Values from raster layers statistics
- Hodnoty ze statistik rastrových vrstev
Mean
- Průměr
+ Průměr
Std. deviation
- Směrodatná odchylka
Max value
- Max. hodnota
Min value
- Min. hodnota
Values from QGIS map canvas
- Hodnoty z mapového okna QGISu
Current extent
- Aktuální rozsah
+ Aktuální rozsah
Full extent of all layers in map canvas
- Plný rozsah všech vrstev v mapovém okně
Wrong expression
- Chybný výraz
The expression entered is not correct
-
-
-
- OgrConverterGuiBase
-
- OGR Layer Converter
- Konvertor OGR vrstvy
-
-
- Source
- Zdroj
-
-
- Format
- Formát
-
-
- File
- Soubor
-
-
- Directory
- Adresář
-
-
- Remote source
- Vzdálený zdroj
-
-
- Dataset
- Soubor dat
-
-
- Browse
- Procházet
-
-
- Layer
- Vrstva
-
-
- Target
- Cíl
-
-
-
- OgrPlugin
-
- Run OGR Layer Converter
- Spustit konvertor OGR vrstev
-
-
- OG&R Converter
- Konvertor OG&R
-
-
- Translates vector layers between formats supported by OGR library
- Transformuje vektorové vrstvy mezi formáty podporovanými knihovnou OGR
+ Zadaný výraz je neplatný
@@ -9357,6 +7424,11 @@ Chybný řádek: %1
Name
Název
+
+ Name of the new connection
+ Název nového připojení
+
Database instance
@@ -9372,843 +7444,37 @@ Chybný řádek: %1
Password
Heslo
-
- Name of the new connection
- Název nového připojení
-
Save Password
Uložit heslo
-
- OsmAddRelationDlg
-
- Create OSM relation
- Vytvořit OSM relaci
-
-
- Relation type:
- Typ relace:
-
-
- Show type description
- Zobrazit popis typu
-
-
- Shows brief description of selected relation type.
- Zobrazí stručný popis vybraného typu relace.
-
-
- ...
- ...
-
-
- Properties
- Vlastnosti
-
-
- Generate tags
- Vytvořit popisky
-
-
- Fills tag table with tags that are typical for relation of specified type.
- Naplní tabulku značek značkami které jsou typické pro daný typ relace.
-
-
- Remove all selected tags
- Odstranit všechny vybrané značky
-
-
- Removes all selected tags.
- Odstraní všechny vybrané značky.
-
-
- Members
- Členové
-
-
- Select member on map
- Vybrat člen na mapě
-
-
- Starts process of selecting next relation member on map.
- Spustí proces vybrání dalšího člena relace na mapě.
-
-
- Remove all selected members
- Odstranit všechny vybrané členy
-
-
- Removes all selected members.
- Odstraní všechny vybrané členy.
-
-
- Create
- Vytvořit
-
-
- Cancel
- Storno
-
-
- Save
- Uložit
-
-
- Edit OSM relation
- Upravit OSM vztahy
-
-
- for grouping boundaries and marking enclaves / exclaves
- pro seskupování hranic a značení enkláv / exkláv
-
-
- to put holes into areas (might have to be renamed, see article)
- pro vložení děr do oblastí (možná by mělo být přejmenováno, viz článek)
-
-
- any kind of turn restriction
- jakýkoliv druh omezení odbočování
-
-
- like bus routes, cycle routes and numbered highways
- jako cesty pro bus, cyklostezky a číslované/značené dálnice
-
-
- traffic enforcement devices; speed cameras, redlight cameras, weight checks, ...
- zařízení omezení provozu; kamery měření rychlosti, kamery na semaforech, kontroly váhy, ...
-
-
- OSM Information
- OSM informace
-
-
-
- OsmDownloadDlg
-
- Download OSM data
- Stáhnout OSM data
-
-
- Extent
- Rozsah
-
-
- Latitude:
- Zem. délka:
-
-
- From
- Od
-
-
- To
- Do
-
-
- Longitude:
- Zem. šířka:
-
-
- <nothing>
- <nic>
-
-
- ...
- ...
-
-
- Download to:
- Stáhnout do:
-
-
- Open data automatically after download
- Automaticky načíst data po stažení
-
-
- Replace current data (current layer will be removed)
- Nahradit aktuální data (aktuální vrstva bude odstraněna)
-
-
- Use custom renderer
- Použít vlastní vykreslovač
-
-
- Download
- Stáhnout
-
-
- Cancel
- Storno
-
-
- OSM Download
- Satžení OSM
-
-
- Unable to save the file %1: %2.
- Nemohu uložit soubor %1: %2.
-
-
- Waiting for OpenStreetMap server ...
- Čekám na OpenStreetMap server ...
-
-
- Download process failed. OpenStreetMap server response: %1 - %2
- Stahování se nezdařilo. OpenStreetMap server odpověděl: %1 - %2
-
-
- Check your internet connection
- Zkontrolujte vaše internetové připojení
-
-
- OSM Download Error
- Chyba stahování OSM
-
-
- Download failed: %1.
- Sathování selhalo: %1.
-
-
- Choose file to save
- Zvolte soubor k uložení
-
-
- OSM Files (*.osm)
- OSM soubory (*.osm)
-
-
- Getting data
- Získávám data
-
-
- The OpenStreetMap server you are downloading OSM data from (~ api.openstreetmap.org) has fixed limitations of how much data you can get. As written at <http://wiki.openstreetmap.org/wiki/Getting_Data> neither latitude nor longitude extent of downloaded region can be larger than 0.25 degrees. Note that Quantum GIS allows you to specify any extent you want, but OpenStreetMap server will reject all request that won't satisfy downloading limitations.
- OpenStreetMap server, ze kterého stahujete OSM data (~ api.openstreetmap.org) má pevná omezení množství dat, které můžete získat. Jake je napsáno na <http://wiki.openstreetmap.org/wiki/Getting_Data>, rozsah zeměpisné délky ani šířky stahovaných dat nesmí být větší než 0.25 stupňů. Pamatujte, že Quantum GIS vám dovolí zadat jakýkoliv rozsah, ale server OpenStreetMap zamítne všechny požadavky, které nesplní limity stahování dat.
-
-
- Both extents are too large!
- Oba rozsahy jsou příliš velké!
-
-
- Latitude extent is too large!
- Rozsah zeměpisné délky je příliš velký!
-
-
- Longitude extent is too large!
- Rozsah zeměpisné šířky je příliš velký!
-
-
- OK! Area is probably acceptable to server.
- OK! Oblast je zřejmě akceptovatelná pro server.
-
-
-
- OsmFeatureDW
-
- OSM Plugin
- OSM zásuvný modul
-
-
- The 'Create OSM Relation' dialog was closed automatically because current OSM database was changed.
- Dialog 'Vytvořit OSM vztah' byl automaticky zavřen, protože aktuální OSM databáze se změnila.
-
-
- OSM Feature Dock Widget
- Dock Widget OSM prvků
-
-
- Choose OSM feature first.
- Vyberte nejdříve OSM prvek.
-
-
- Choose relation for editing first.
- Vyberte nejdříve vztah pro editaci.
-
-
- Snapping ON. Hold Ctrl to disable it.
- Přichytávání ZAPNUTO. Podržte Ctrl pro jeho vypnutí.
-
-
- Hide OSM Edit History
- Skrýt historii úprav OSM
-
-
- Show OSM Edit History
- Zobrazit historii úprav OSM
-
-
- OSM Feature
- OSM prvek
-
-
- ...
- ...
-
-
- Create point
- Vytvořit bod
-
-
- Create line
- Vytvořit linii
-
-
- Create polygon
- Vytvořit polygon
-
-
- Create relation
- Vytvořit vztah
-
-
- Undo
- Zpět
-
-
- Redo
- Znovu
-
-
- Show/Hide OSM Edit History
- Zobrazit/Skrýt historii úprav OSM
-
-
- Feature:
- Prvek:
-
-
- TYPE, ID:
- TYP, ID:
-
-
- CREATED:
- VYTVOŘENO:
-
-
- USER:
- UŽIVATEL:
-
-
- unknown
- neznámé
-
-
- Properties
- Vlastnosti
-
-
- Remove selected tags
- Odstranit vybrané popisky
-
-
- Relations
- Vztahy
-
-
- Add relation
- Přidat vztah
-
-
- Edit relation
- Upravit vztah
-
-
- Remove relation
- Odstranit vztah
-
-
- Relation tags:
- Popisky vztahu:
-
-
- 1
- 1
-
-
- Relation members:
- Členové vztahu:
-
-
- Identify feature
- Určit prvek
-
-
- Move feature
- Přesunout prvek
-
-
- Remove this feature
- Odstranit tento prvek
-
-
-
- OsmImportDlg
-
- Import data to OSM
- Importovat data do OSM
-
-
- In this dialog you can import a layer loaded in QGIS into active OSM data.
- V tomto dialogu můžete importovat vrstvu načtenou v QGISu do aktivních OSM dat.
-
-
- Layer
- Vrstva
-
-
- Import only current selection
- Importovat pouze aktuální výběr
-
-
- Layer doesn't exist
- Vrstva neexistuje
-
-
- The selected layer doesn't exist anymore!
- Vybraná vrstva už neexistuje!
-
-
- Importing features...
- Importuje prvky...
-
-
- Cancel
- Storno
-
-
- Import
- Import
-
-
- Import has been completed.
- Import byl dokončen.
-
-
-
- OsmLoadDlg
-
- Load OSM
- Načíst OSM
-
-
- OpenStreetMap file to load:
- OpenStreetMap soubor k načtení:
-
-
- ...
- ...
-
-
- Add columns for tags:
- Přidat sloupce pro popisky:
-
-
- Use custom renderer
- Použít vlastní vykreslovač
-
-
- Replace current data (current layers will be removed)
- Nahradit aktuální data (aktuální vrstvy budou dostraněny)
-
-
- Choose an Open Street Map file
- Zvolten Open Street Map soubor
-
-
- OSM Files (*.osm)
- OSM soubory (*.osm)
-
-
- OSM Load
- Načíst OSM
-
-
- Please enter path to OSM data file.
- Zadejte prosím cestu k datovému OSM souboru.
-
-
- Path to OSM file is invalid: %1.
- Cesta k OSM souboru je neplatná: %1.
-
-
- Error
- Chyba
-
-
- Layers of OSM file "%1" are loaded already.
- Vrstvy OSM souboru "%1" jsou již načteny.
-
-
- Failed to load polygon layer.
- Selhalo načtení polygonové vrstvy.
-
-
- Failed to load line layer.
- Selhalo načtení liniové vrstvy.
-
-
- Failed to load point layer.
- Selhalo načtení bodové vrstvy.
-
-
- Could not connect to setRenderer signal.
- Nemohu se připojit k signálu setRenderer.
-
-
- Failed to load layers: %1
- Selhalo načtení vrstev: %1
-
-
-
- OsmPlugin
-
- Load OSM from file
- Načíst OSM ze souboru
-
-
- Load OpenStreetMap from file
- Načíst OpenStreetMap ze souboru
-
-
- Import data from a layer
- Importovat data z vrstvy
-
-
- Import data from a layer to OpenStreetMap
- Importovat data z vrstvy do OpenStreetMap
-
-
- Save OSM to file
- Uložit OSM do souboru
-
-
- Save OpenStreetMap to file
- Uložit OpenStreetMap do souboru
-
-
- Download OSM data
- Stáhnout OSM data
-
-
- Download OpenStreetMap data
- Stáhnout OpenStreetMap data
-
-
- Upload OSM data
- Nahrát OSM data na server
-
-
- Upload OpenStreetMap data
- Nahrát OpenStreetMap data na server
-
-
- Show/Hide OSM Feature Manager
- Zobrazit/skrýt Správce prvků OSM
-
-
- Show/Hide OpenStreetMap Feature Manager
- Zobrazit/skrýt Správce prvků OpenStreetMap
-
-
- Sorry
- Promiňte
-
-
- You don't have OSM provider installed!
- Nemáte nainstalovaného poskytovatele OSM!
-
-
- OSM Save to file
- Uložit OSM do souboru
-
-
- No OSM data are loaded/downloaded or no OSM layer is selected in Layers panel.
-Please change this situation first, because OSM Plugin doesn't know what to save.
- Žádná OSM data nejsou načtena/stažena nebo není žádná OSM vrstva vybrána v panelu Vrstvy.
-Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, co má uložit.
-
-
- OSM Upload
- Nahrání OSM na server
-
-
- No OSM data are loaded/downloaded or no OSM layer is selected in Layers panel.
-Please change this situation first, because OSM Plugin doesn't know what to upload.
- Žádná OSM data nejsou načtena/stažena nebo není žádná OSM vrstva vybrána v panelu Vrstvy.
-Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, co má načíst na server.
-
-
- OSM Import
- OSM Import
-
-
- No OSM data are loaded/downloaded or no OSM layer is selected in Layers panel.
-Please change this situation first, because OSM Plugin doesn't know what layer will be destination of the import.
- Žádná OSM data nejsou načtena/stažena nebo není žádná OSM vrstva vybrána v panelu Vrstvy.
-Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, jaká vrstva bude cílem importu.
-
-
- There are currently no available vector layers.
- Momentálně nejsou k dispozici žádné vektorové vrstvy.
-
-
-
- OsmSaveDlg
-
- Choose an Open Street Map file
- Zvolte Open Street Map soubor
-
-
- OSM Files (*.osm)
- OSM soubory (*.osm)
-
-
- Save OSM to file
- Uložit OSM do souboru
-
-
- Unable to save the file %1: %2.
- Nemohu uložit do souboru %1: %2.
-
-
- Initializing...
- Spouštím...
-
-
- Saving nodes...
- Ukládám uzly...
-
-
- Saving lines...
- Ukládám linie...
-
-
- Saving polygons...
- Ukládám polygony...
-
-
- Saving relations...
- Ukládám vztahy...
-
-
- Save OSM
- Uložit OSM
-
-
- Where to save:
- Kam uložit:
-
-
- ...
- ...
-
-
- Features to save:
- Prvky k uložení:
-
-
- Points
- Body
-
-
- Lines
- Linie
-
-
- Polygons
- Polygony
-
-
- Relations
- Vztahy
-
-
- Tags
- Popisky
-
-
-
- OsmUndoRedoDW
-
- OSM Edit History
- Historie editace OSM
-
-
- Clear all
- Vyčistit vše
-
-
- ...
- ...
-
-
- Undo
- Zpět
-
-
- Redo
- Znovu
-
-
-
- OsmUploadDlg
-
- Upload
- Načíst na server
-
-
- OSM Upload
- Nahrání OSM na server
-
-
- Node addition failed.
- Přidání uzlu selhalo.
-
-
- Node update failed.
- Aktualizace uzlu selhala.
-
-
- Node deletion failed.
- Smazání uzlu selhalo.
-
-
- Way addition failed.
- Přidání cesty selhalo.
-
-
- Way update failed.
- Aktualizace cesty selhala.
-
-
- Way deletion failed.
- Smazání cesty selhalo.
-
-
- Relation addition failed.
- Přidání vztahu selhalo.
-
-
- Relation update failed.
- Aktualizace vztahu selhala.
-
-
- Relation deletion failed.
- Smazání vztahu selhalo.
-
-
- Connection to OpenStreetMap server cannot be established. Please check your proxy settings, firewall settings and try again.
- Spojení se serverem OpenStreetMap nemohlo být navázáno. Zkontrolujte prosím vaše nastavení proxy a firewallu a zkuste znovu.
-
-
- Changeset closing failed.
- Zavření sady změn selhalo.
-
-
- Upload process failed. OpenStreetMap server response: %1 - %2.
- Proces načtení dat na server selhal. Odpověď serveru OpenStreetMap: %1 - %2.
-
-
- Authentication failed. Please try again with correct login and password.
- Ověření selhalo. Zkuste prosím znovu se správným uživatelským jménem a heslem.
-
-
- Setting host failed.
- Nastavení hostitele selhalo.
-
-
- Setting user and password failed.
- Nastavení uživatele a hesla selhalo.
-
-
- Setting proxy failed.
- Nastavení proxy selhalo.
-
-
- Upload OSM data
- Nahrát OSM data na server
-
-
- Ready for upload
- Připraven k nahrání
-
-
- 1
- 1
-
-
- 2
- 2
-
-
- 3
- 3
-
-
- 4
- 4
-
-
- 5
- 5
-
-
- Comment on your changes:
- Komentář vašich změn:
-
-
- OSM account
- OSM účet
-
-
- Username:
- Uživatelské jméno:
-
-
- Password:
- Heslo:
-
-
- Show password
- Zobrazit heslo
-
-
- Save password
- Uložit heslo
-
-
- Uploading data...
- Nahrávám data...
-
-
OutputSelectionPanel
[Save to temporary file]
- [Uložit do dočasného souboru]
Save to a temporary file
- Uložit do dočasného souboru
Save to file...
- Uložit do souboru...
Save to memory layer
-
Save file
- Uložit soubor
+ Uložit soubor
Select directory
- Vybrat složku
@@ -10250,14 +7516,6 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
There is no defined database connection "%s".
Není zde definováno žádné databázové připojení "%s".
-
- Enter password
- Zadejte heslo
-
-
- Enter password for connection "%s":
- Zadejte heslo pro připojení "%s":
-
PrepareAPIDialog
@@ -10274,31 +7532,31 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Processing
Processing
- Zpracování
Toolbox
- Sada nástrojů
Graphical modeler
- Grafický modelář
History and log
- Historie a záznam
+ Historie a záznam
Options and configuration
- Možnosti a konfigurace
&Results viewer
- &Prohlížeč výsledků
&Commander
-
@@ -10306,43 +7564,39 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Processing Toolbox
- Nástroje zpracování
Enter algorithm name to filter list
- Zadejte název algoritmu do seznamu filtrů
+ Zadejte název algoritmu do seznamu filtrů
Search...
- Hledat...
+ Hledat...
Execute
- Spustit
+ Spustit
Execute as batch process
- Spustit jako dávkový proces
+ Spustit jako dávkový proces
Edit rendering styles for outputs
- Upravit vykreslovací styly pro výstupy
+ Upravit vykreslovací styly pro výstupy
Recently used algorithms
- Naposledy použité algoritmy
+ Naposledy použité algoritmy
Python
-
- Python
- Python
-
Python warning
- Varování Pythonu
An error has occured while executing Python code:
@@ -10384,68 +7638,12 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Error while unloading plugin %s
Chyba při vypínání zásuvného modulu %s
-
- Couldn't load plugin '%1' from ['%2']
- Nemohu náčíst zásuvný modul '%1' z ['%2']
-
-
- Couldn't load plugin %1
- Nemohu náčíst zásuvný modul '%1
-
-
- %1 due an error when calling its classFactory() method
- %1 kvůli chybě při metodě volání jeho classFactory()
-
-
- %1 due an error when calling its initGui() method
- %1 kvůli chybě při metodě volání jeho initGui()
-
-
- Error while unloading plugin %1
- Chyba při vypínání zásuvného modulu %1
-
PythonConsole
- Open file
- Otevřit soubor
-
-
- Save
- Uložit
-
-
- Cut
- Vyjmout
-
-
- Copy
- Kopírovat
-
-
- Paste
- Vložit
-
-
- The file <b>"{0}"</b> has been deleted or is not accessible
-
-
- The file <b>"{0}"</b> has been changed and reloaded
-
-
- The file <b>"{0}"</b> is read only, please save to different file first.
-
-
- Run script
- Spustit skript
-
-
- Show editor
- Zobrazit editor
+ Python Console
+ Python konzole
Clear console
@@ -10499,6 +7697,18 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Find Text
Hledat text
+
+ Cut
+ Vyjmout
+
+
+ Copy
+ Kopírovat
+
+
+ Paste
+ Vložit
+
Comment
Komentář
@@ -10525,7 +7735,7 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
@@ -10537,20 +7747,20 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
[Temporary file saved in {0}]
-
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
@@ -10560,10 +7770,6 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
You have to save the file before running it.
Před spuštěním musíte soubor nejdřív uložit.
-
- Syntax ok
- Syntaxe ok
-
Python Console: Save file
Python konzole: Uložit soubor
@@ -10594,28 +7800,28 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Close Tab
- Zavřít panel
Close All
- Zavřít vše
Close Others
- Zavřít ostatní
Save As
- Uložit jako
+ Uložit jako
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
@@ -10623,19 +7829,19 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
The file <b>'{0}'</b> has been modified, save changes?
-
Unable to restore the file:
{0}
-
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
@@ -10653,17 +7859,33 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Object Inspector
Inspektor objektů
+
+ Open file
+ Otevřit soubor
+
+
+ Save
+ Uložit
+
Save As...
Uložit jako...
+
+ Run script
+ Spustit skript
+
+
+ Show editor
+ Zobrazit editor
+
Import Class
Importovat třídu
Import Processing class
-
Enter text to find...
@@ -10699,7 +7921,7 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
@@ -10750,12 +7972,16 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Odstranit API cestu
- Manage Script
- Spravovat skript
+ The file <b>"{0}"</b> has been deleted or is not accessible
+
- Import Sextante class
- Importovat Sextante třídu
+ The file <b>"{0}"</b> has been changed and reloaded
+
+
+ The file <b>"{0}"</b> is read only, please save to different file first.
+
Import PyQt.QtCore class
@@ -10765,14 +7991,6 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Import PyQt.QtGui class
Importovat PyQt.QtGui třídu
-
- Open script file
- Otevřít soubor skriptu
-
-
- Save to script file
- Uložit do souboru skriptu
-
Run command
Spustit příkaz
@@ -10781,34 +7999,6 @@ Změňte prosím nejdříve tuto situaci, protože zásuvný modul OSM neví, ja
Help
Nápověda
-
- Python Console
- Python konzole
-
-
- To access Quantum GIS environment from this console
-use qgis.utils.iface object (instance of QgisInterface class).
-
-
- Pro přístup k prostředí Quantum GISu z této konzole
-použijte qgis.utils.iface object (instance od třídy QgisInterface).
-
-
-
-
- QFileDialog
-
- Save experiment report to portable document format (.pdf)
- Uložit zprávu ze zkoušky do tisknutelného formátu (.pdf)
-
-
- Load layer properties from style file (.qml)
- Načti vlastnosti vrstvy ze souboru stylů (.qml)
-
-
- Save layer properties as style file (.qml)
- Ulož vlastnosti vrstvy jako soubor stylů (.qml)
-
QGis::UnitType
@@ -10838,7 +8028,7 @@ použijte qgis.utils.iface object (instance od třídy QgisInterface).
nautical miles
-
@@ -10918,115 +8108,213 @@ použijte qgis.utils.iface object (instance od třídy QgisInterface).
QObject
- No Data Providers
- Žádní poskytovatelé dat
+ Interpolating...
+ Probíhá interpolace...
- No vector layers can be loaded. Check your QGIS installation
- Nelze nahrát žádné vektorové vrstvy. Zkontrolujte vaši QGIS instalaci
+ Abort
+ Přerušit
- No data provider plugins are available. No vector layers can be loaded
- Nejsou k dispozici žádné zásuvné moduly pro přístup k datům. Nelze nahrát žádné vektorové vrstvy
+ Building triangulation...
+ Vytvářím triangulaci...
- Unable to instantiate the data provider plugin %1
- Nemohu konkretizovat zásuvný modul poskytovatele dat %1
+ Estimating normal derivatives...
+ Odhaduji normálové odvozeniny...
- Failed to load %1: %2
- Selhalo načtení %1: %2
+ minidump written to %1
+ minivýpis zapsán do %1
- Expected operator, got scalar value!
- Očekáván operátor, dostal jsem skalární hodnotu!
+ writing of minidump to %1 failed (%2)
+ zápis minivýpisu do %1 selhal (%2)
- Unexpected state when evaluating operator!
- Neočekávaný stav při ověření operátoru!
+ creation of minidump to %1 failed (%2)
+ vytváření minivýpisu do %1 selhalo (%2)
- Could not retrieve value of list value
- Nemohu získat hodnotu seznamu hodnot
+ Crash dumped
+ Data o pádu vypsána
- Unknown operator: %1
- Neznámý operátor: %1
+ QGIS starting in non-interactive mode not supported.
+You are seeing this message most likely because you have no DISPLAY environment variable set.
+
+ Start QGISu v neinteraktivním režimu není podporován.
+Tuto zprávu vidíte nejspíš proto, že nemáte nastavenou proměnnou DISPLAY.
- Division by zero.
- Dělení nulou.
+ Deleted vertices
+ Smazány uzly
- Unknown token: %1
- Neznámý token: %1
+ Moved vertices
+ Přesunuty uzly
- Expression error: %1
- Chyba výrazu: %1
+ No active vector layer
+ Žádná aktivní vrstva
- Unknown error %1: %2
- Neznámá chyba %1: %2
+ To select features, choose a vector layer in the legend
+ Pro výběr prvků zvolte vektorovou vrstvu v legendě
- Geometry is 0
- Geometrie je 0
+ CRS Exception
+ Výjimka CRS
- Index %1 out of range [0;%2[
- Index %1 mimo rozsah [0;%2[
+ Selection extends beyond layer's coordinate system.
+ Výběr přesahuje mimo souřadnicový systém vrstvy.
- Operator doesn't match the argument types.
- Operátor nesouhlasí s typy argumentu.
+ Python is not enabled in QGIS.
+ Python není zapnut v QGISu.
- Error in power function
- Chyba v mocninné funkci
+ Plugins
+ Zásuvné moduly
- Value '%1' is not numeric
- Hodnota '%1' není číselná
+ Plugin "%1" is not compatible with this version of QGIS.
+It will be disabled.
+ Zásuvný modul "%1" není kompatibilní s touto verzí QGISu.
+Bude vypnut.
- Unknown error!
- Neznámá chyba!
+ Loaded %1 (package: %2)
+ Načteno %1 (balíček: %2)
- Fit to a linear transform requires at least 2 points.
- Lineární transformace vyžaduje nejméně 2 body.
+ Library name is %1
+
+ Název knihovny je %1
- Fit to a Helmert transform requires at least 2 points.
- Helmertova transformace vyžaduje nejméně 2 body.
+ Failed to load %1 (Reason: %2)
+ Selhalo načtení %1 (důvod: %2)
- Fit to an affine transform requires at least 4 points.
- Afiní transformace vyžaduje nejméně 4 body.
+ Attempting to resolve the classFactory function
+
+ Pokouším se vyřešit funkci classFactory
+
- Fitting a projective transform requires at least 4 corresponding points.
- Aplikace projektivní transformace vyžaduje alespoň 4 odpovídající body.
+ Loaded %1 (Path: %2)
+ Načteno %1 (cesta: %2)
- GPS eXchange format provider
- Poskytovatel GPS eXchange formátu
+ Error Loading Plugin
+ Chyba při načítání zásuvného modulu
- Label
- Popisek
+ There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
+%1.
+ Chyba při načátání zásuvného modulu. Následující diagnostické informace mohou pomoci QGIS vývojářům vyřešit problém:
+%1.
+
+
+ Unable to find the class factory for %1.
+ Nemohu najít class factory pro %1.
+
+
+ Plugin %1 did not return a valid type and cannot be loaded
+ Zásuvný modul %1 nevrátil platný typ a nemohl být načten
+
+
+ Error when reading metadata of plugin %1
+ Chyba při načítání metadat zásuvného modulu %1
+
+
+ Could not open CRS database %1
+Error(%2): %3
+ Nemohu otevřít databázi SRS %1
+Chyba(%2): %3
+
+
+ CRS
+ SRS
+
+
+ Generated CRS
+ A CRS automatically generated from layer info get this prefix for description
+ Vytvořený SRS
+
+
+ Saved user CRS [%1]
+ uložen uživatelský SRS [%1]
+
+
+ Imported from GDAL
+ Importován z GDAL
+
+
+ Can't open database: %1
+ Nemohu otevřít databázi: %1
Caught a coordinate system exception while trying to transform a point. Unable to calculate line length.
Zachycena výjimka souřadnicového systému během zkoušení transformovat bod. Nelze vypočítat délku linie.
-
- Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
- Zachycena výjimka souřadnicového systému během zkoušení transformovat bod. Nelze vypočítat plochu polygonu.
-
-
- GRASS plugin
- GRASS zásuvný modul
-
-
- QGIS couldn't find your GRASS installation.
-Would you like to specify path (GISBASE) to your GRASS installation?
- QGIS nemůže nalézt instalaci programu GRASS.
-Chcete zadat cestu (GISBASE) k instalaci programu GRASS?
-
-
- Choose GRASS installation path (GISBASE)
- Vyberte cestu k instalaci GRASSu (GISBASE)
-
-
- GRASS data won't be available if GISBASE is not specified.
- GRASS data nejsou dostupná, pokud GISBASE není určena.
-
-
- CopyrightLabel
- CopyrightLabel
-
-
- Draws copyright information
- Vypsat informace o copyrightu
-
-
- Version 0.1
- Verze 0,1
-
-
- Version 0.2
- Verze 0,2
-
-
- Loads and displays delimited text files containing x,y coordinates
- Nalézt a zobrazit soubory s odděleným textem obsahující souřadnice x a y
-
-
- Layers
- Vrstvy
-
-
- Add Delimited Text Layer
- Přidat vrstvu s odděleným textem
-
-
- GPS Tools
- GPS nástroje
-
-
- Tools for loading and importing GPS data
- Nástroje pro načtení a import dat GPS
-
-
- GRASS
- GRASS
-
-
- GRASS layer
- Vrstva GRASSu
-
-
- NorthArrow
- Severní směrovka
-
-
- Displays a north arrow overlayed onto the map
- Zobrazit severní směrovku umístěnou nad mapou
-
-
- ScaleBar
- Měřítko
-
-
- Draws a scale bar
- Vykreslit měřítko
-
-
- SPIT
- SPIT
-
-
- Shapefile to PostgreSQL/PostGIS Import Tool
- Importovací nástroj Shapefile do PostgreSQL/postGIS
-
-
- WFS plugin
- WFS zásuvný modul
-
-
- Adds WFS layers to the QGIS canvas
- Přidat WFS vrstvy do okna QGIS
-
-
- Python error
- Python chyba
-
-
- km2
- km2
-
-
- ha
- ha
-
-
- m2
- m2
-
-
- Can't open database: %1
- Nemohu otevřít databázi: %1
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
Při pokusu o transformaci bodu byla zjištěna chyba souřadnicového systému. Nemohu vypočítat plochu polygonu nebo obvod.
+
+ Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
+ Zachycena výjimka souřadnicového systému během zkoušení transformovat bod. Nelze vypočítat plochu polygonu.
+
km²
km²
+
+ ha
+ ha
+
cm
cm
+
+ sq ft
+ čtvereční stopy
+
acres
@@ -11231,16 +8385,6 @@ Chcete zadat cestu (GISBASE) k instalaci programu GRASS?
sq mile
čtvereční míle
-
- sq ft
- čtvereční stopy
-
-
- mile
- míle
-
foot
@@ -11251,15 +8395,20 @@ Chcete zadat cestu (GISBASE) k instalaci programu GRASS?
feet
stopy
+
+ mile
+ míle
+
sq. NM
- čtver. NM
NM
- NM
neznámé
- Regular expressions on numeric values don't make sense. Use comparison instead.
- Regulérní výrazy číselných hodnot nedávají smysl. Užijte raději srovnání.
+ Cannot convert '%1' to double
+ Nemohu převést '%1' na double
- Geoprocessing functions for working with PostgreSQL/PostGIS layers
- Funkce geoprocesingu pro práci s vrstvami PostgreSQL/PostGis
+ Cannot convert '%1' to int
+ Nemohu převést '%1' na int
+
+
+ Cannot convert '%1' to DateTime
+ Nemohu převést '%1' na Datum-čas
+
+
+ Cannot convert '%1' to Date
+ Nemohu převést '%1' na Datum
+
+
+ Cannot convert '%1' to Time
+ Nemohu převést '%1' na Čas
+
+
+ Cannot convert '%1' to Interval
+ Nemohu převést '%1' na Interval
+
+
+ Cannot convert '%1' to boolean
+ Nemohu převést '%1' na boolean
+
+
+ Domain max must be greater than domain min
+ Domain max musí být vyšší než domain min
+
+
+ Exponent must be greater than 0
+ Exponent musí být vyšší než 0
+
+
+ Invalid regular expression '%1': %2
+ Neplatný regulární výraz '%1': %2
+
+
+ Index is out of range
+ Index je mimo rozsah
+
+
+ Cannot convert '%1:%2:%3' to color
+ Nemohu převést '%1:%2:%3' na barvu
+
+
+ Cannot convert '%1:%2:%3:%4' to color
+ Nemohu převést '%1:%2:%3:%4' na barvu
+
+
+ "%1" is not a valid color ramp
+ "%1" není platný barevný přechod
+
+
+ Cannot convert '%1:%2:%3:%4:%5' to color
+ Nemohu převést '%1:%2:%3:%4:%5' na barvu
+
+
+ function help for %1 missing
+ nápověda funkce pro %1 chybí
+
+
+ Operators
+ Operátory
+
+
+ Fields and Values
+ Pole a hodnoty
+
+
+ Math
+ Matematika
+
+
+ Conversions
+ Převody
+
+
+ Conditionals
+ Kondicionály
+
+
+ second|seconds
+ list of words separated by | which reference years
+
+
+ minute|minutes
+ list of words separated by | which reference minutes
+
+
+ hour|hours
+ list of words separated by | which reference minutes hours
+
+
+ day|days
+ list of words separated by | which reference days
+
+
+ week|weeks
+ wordlist separated by | which reference weeks
+
+
+ month|months
+ list of words separated by | which reference months
+
+
+ year|years
+ list of words separated by | which reference years
+
+
+ Date and Time
+ Datum a čas
+
+
+ String
+ Řetězec
+
+
+ Color
+ Barva
+
+
+ Geometry
+ Geometrie
+
+
+ Record
+ Záznam
+
+
+ No root node! Parsing failed?
+ Žádný kořenový uzel! Parsování selhalo?
+
+
+ (no root)
+ (žádný kořen)
+
+
+ Unary minus only for numeric values.
+ Unární minus pouze pro číselné hodnoty.
+
+
+ Can't preform /, *, or % on DateTime and Interval
+ Nemohu předvytvořit /, *, nebo % v DateTime a Interval
+
+
+ [unsupported type;%1; value:%2]
+ [nepodporovaný typ;%1; hodnota:%2]
+
+
+ Column '%1' not found
+ Sloupec '%1' nenalezen
+
+
+ Exception: %1
+ Výjimka: %1
+
+
+ GEOS
+ GEOS
+
+
+ GEOS prior to 3.2 doesn't support GEOSInterpolate
+ GEOS před verzí 3.2 nepodporuje GEOSInterpolate
+
+
+ segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
+ segment %1 prstence %2 polygonu %3 protíná segment %4 prstence %5 polygonu %6 na %7
+
+
+ ring %1 with less than four points
+ prstenec %1 s méně než čtyřmi body
+
+
+ ring %1 not closed
+ prstenec %1 není uzavřen
+
+
+ line %1 with less than two points
+ linie %1 s méně než dvěma body
+
+
+ line %1 contains %n duplicate node(s) at %2
+ number of duplicate nodes
+ linie %1 obsahuje %n duplicitní uzel na %2 linie %1 obsahuje %n duplicitní uzly na %2 linie %1 obsahuje %n duplicitních uzlů %2
+
+ segments %1 and %2 of line %3 intersect at %4
+ segmenty %1 a %2 z linie %3 se protínají na %4
+
+
+ ring %1 of polygon %2 not in exterior ring
+ prstenec %1 polygonu %2 není ve vnějším kruhu
+
+
+ GEOS error:could not produce geometry for GEOS (check log window)
+ GEOS chyba:nemohu vytvořit geometrii pro GEOS (zkontrolujte okno výpisů)
+
+
+ GEOS error:%1
+ GEOS chyba:%1
+
+
+ polygon %1 has no rings
+ polygon %1 nemá prstence
+
+
+ polygon %1 inside polygon %2
+ polygon %1 je uvnitř polygonu %2
+
+
+ Unknown geometry type
+ Neznámý typ geometrie
+
+
+ Unknown geometry type %1
+ Neznámý typ geometrie %1
+
+
+ Geometry validation was aborted.
+ Ověření platnosti geometrie bylo přerušeno.
+
+
+ Geometry has %1 errors.
+ Geometrie má %1 chyb.
+
+
+ Geometry is valid.
+ Geometrie je platná.
+
+
+ invalid line
+ neplatná linie
+
+
+ Label
+ Popisek
+
+
+ Console
+ Konzole
+
+
+ infinite
+ nekonečno
+
+
+ W
+ Z
+
+
+ E
+ V
+
+
+ S
+ J
+
+
+ N
+ S
+
+
+ No QGIS data provider plugins found in:
+%1
+
+ Nenalezeny žádné zásuvné moduly poskytovatelů dat QGISu v:
+%1
+
+
+ No vector layers can be loaded. Check your QGIS installation
+ Nelze nahrát žádné vektorové vrstvy. Zkontrolujte vaši QGIS instalaci
+
+
+ No Data Providers
+ Žádní poskytovatelé dat
+
+
+ No data provider plugins are available. No vector layers can be loaded
+ Nejsou k dispozici žádné zásuvné moduly pro přístup k datům. Nelze nahrát žádné vektorové vrstvy
+
+
+ Unable to instantiate the data provider plugin %1
+ Nemohu konkretizovat zásuvný modul poskytovatele dat %1
+
+
+ Failed to load %1: %2
+ Selhalo načtení %1: %2
+
+
+ OGR driver for '%1' not found (OGR error: %2)
+ Ovladač OGR pro '%1' nenalezen (chyba OGR: %2)
+
+
+ trimming attribute name '%1' to ten significant characters produces duplicate column name.
+ oříznutí jména atributu '%1' na deset významných znaků produkuje duplcitní názvy sloupců.
+
+
+ creation of data source failed (OGR error:%1)
+ vytvoření datového zdroje selhalo (chyba OGR:%1)
+
+
+ creation of layer failed (OGR error:%1)
+ vytvoření vrstvy selhalo (chyba OGR:%1)
+
+
+ unsupported type for field %1
+ nepodporovaný typ pro pole %1
+
+
+ creation of field %1 failed (OGR error: %2)
+ vytvoření pole %1 selhalo (chyba OGR: %2)
+
+
+ created field %1 not found (OGR error: %2)
+ vytvořené pole %1 nenalezeno (OGR chyba: %2)
+
+
+ Invalid variant type for field %1[%2]: received %3 with type %4
+ Neplatný typ varianty pro pole %1[%2]: získáno %3 s typem %4
+
+
+ OGR
+ OGR
+
+
+ no available replacement for internal fieldname ogc_fid found
+
+
+ Reserved attribute name ogc_fid replaced with %1
+
+
+ By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
+
+
+ Feature geometry not imported (OGR error: %1)
+ Geometrie prvku nenaimportována (OGR chyba: %1)
+
+
+ Feature creation error (OGR error: %1)
+ Chyba vytvoření prvku (OGR chyba: %1)
+
+
+ Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
+ Transformace bodu selhala při vykreslování prvku s ID '%1'. Zápis zastaven. (Výjimka: %2)
+
+
+ Feature write errors:
+ Chyby zápisu prvku:
+
+
+ Stopping after %1 errors
+ Zstavuji po %1 chybách
+
+
+
+Only %1 of %2 features written.
+
+Pouze %1 z %2 prvků zapsáno.
+
+
+ Arc/Info ASCII Coverage
+ Arc/Info ASCII Coverage
+
+
+ Atlas BNA
+ Atlas BNA
+
+
+ Comma Separated Value
+ Hodnoty oddělené čárkou
+
+
+ ESRI Shapefile
+ ESRI Shapefile
+
+
+ DBF file
+
+
+ FMEObjects Gateway
+ FMEObjects Gateway
+
+
+ New BNA files are created by the systems default line termination conventions. This may be overridden here.
+
+
+ BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
+
+
+ The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
+
+
+ Limit the number of coordinate pairs per line in multiline format.
+
+
+ Set the number of decimal for coordinates. Default value is 10.
+
+
+ By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
+
+
+ Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
+
+
+ Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
+
+
+ Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
+
+
+ set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
+
+
+ Set to YES to resize fields to their optimal size.
+
+
+ DBF File
+
+
+ Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
+
+
+ Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
+
+
+ GeoJSON
+ GeoJSON
+
+
+ whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
+
+
+ The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
+
+
+ If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
+
+
+ If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
+
+
+ XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
+
+
+ Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ GeoRSS
+ GeoRSS
+
+
+ If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
+
+
+ This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
+
+
+ This is the prefix for the application target namespace.
+
+
+ Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
+
+
+ Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
+
+
+ If not specified, GML2 will be used.
+
+
+ only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
+
+
+ only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
+
+
+ Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
+
+
+ Geography Markup Language [GML]
+ Geography Markup Language [GML]
+
+
+ Generic Mapping Tools [GMT]
+ Generic Mapping Tools [GMT]
+
+
+ By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
+
+
+ By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
+
+
+ If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
+
+
+ Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
+
+
+ Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
+
+
+ By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
+
+
+ GPS eXchange Format [GPX]
+ GPS eXchange Format [GPX]
+
+
+ INTERLIS 1
+ INTERLIS 1
+
+
+ INTERLIS 2
+ INTERLIS 2
+
+
+ Allows you to specify the field to use for the KML <name> element.
+
+
+ Allows you to specify the field to use for the KML <description> element.
+
+
+ Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
+
+
+ Keyhole Markup Language [KML]
+ Keyhole Markup Language [KML]
+
+
+ Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
+
+
+ Mapinfo TAB
+ Mapinfo TAB
+
+
+ Mapinfo MIF
+ Mapinfo MIF
+
+
+ Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
+
+
+ Override the seed file to use.
+
+
+ Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
+
+
+ Indicates whether the color table should be copied from the seed file.
+
+
+ Override the master unit name from the seed file with the provided one or two character unit name.
+
+
+ Override the sub unit name from the seed file with the provided one or two character unit name.
+
+
+ Override the number of subunits per master unit. By default the seed file value is used.
+
+
+ Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
+
+
+ ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
+
+
+ Microstation DGN
+ Microstation DGN
+
+
+ Should update files be incorporated into the base data on the fly.
+
+
+ Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
+
+
+ Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
+
+
+ If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
+
+
+ Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
+
+
+ Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
+
+
+ Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
+
+
+ S-57 Base file
+ S-57 Base file
+
+
+ Spatial Data Transfer Standard [SDTS]
+ Spatial Data Transfer Standard [SDTS]
+
+
+ Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
+
+
+ Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
+
+
+ Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
+
+
+ column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
+
+
+ By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
+
+
+ Field separator character.
+
+
+ Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
+
+
+ Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
+
+
+ SQLite
+ SQLite
+
+
+ Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
+
+
+ If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
+
+
+ If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
+
+
+ Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
+
+
+ SpatiaLite
+ SpatiaLite
+
+
+ AutoCAD DXF
+ AutoCAD DXF
+
+
+ Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
+
+
+ Geoconcept
+ Geoconcept
+
+
+ When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
+
+
+ Set name of geometry column in new layer. Defaults to 'SHAPE'.
+
+
+ Name of the OID column to create. Defaults to 'OBJECTID'.
+
+
+ ESRI FileGDB
+ ESRI FileGDB
+
+
+ Cannot overwrite a OGR layer in place
+
+
+ Failed to transform, writing stopped. (Exception: %1)
+ Transformace selhala, zápis zastaven. (Výjimka: %1)
+
+
+ Unable to load %1 provider
+ Nemohu načíst poskytovatele %1
+
+
+ Provider %1 has no %2 method
+ Poskytovatel %1 nemá %2 metodu
+
+
+ Loaded from Provider
+ Načteno od poskytovatele
+
+
+ Loading of layer failed
+ Načítání vrstvy selhalo
+
+
+ Creation error for features from #%1 to #%2. Provider errors was:
+%3
+ Chyba při vytváření prvků z #%1 do #%2. Chyby poskytovatele byly:
+%3
+
+
+ Import was canceled at %1 of %2
+ Import byl zrušen při %1 z %2
+
+
+ Vector import
+ Import vektorů
+
+
+ Only %1 of %2 features written.
+ Pouze %1 z %2 prvků zapsáno.
+
+
+ Reading raster part %1 of %2
+ Načítám rastr - část %1 z %2
+
+
+ Building Pyramids...
+ Vytvářím pyramidy...
+
+
+ Building pyramids failed - write access denied
+ Sestavení pyramid selhalo - přístup k zápisu odmítnut
+
+
+ Write access denied. Adjust the file permissions and try again.
+ Přístup k zápisu zamítnut. Nastavte oprávnění souboru a zkuste znovu.
+
+
+ Building pyramids failed.
+ Sestavení pyramid selhalo.
+
+
+ The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
+ Soubor není přepisovatelný. Některé formáty nepodporují pyramidové přehledy. Pochybnosti konzultujte s dokumentací GDAL.
+
+
+ Building pyramid overviews is not supported on this type of raster.
+ Sestavení náhledu pyramid není pro tento typ rastrového formátu podporováno.
+
+
+ Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
+ Vytvoření vnitřních pyramidových přehledů není podporováno u rastrů s JPEG kompresí a vaší aktuální libtiff knihovnou.
+
+
+ Multiband color
+ Mnohopásmová barva
+
+
+ Paletted
+ Paletovaný
+
+
+ Singleband gray
+ Jedno pásmo - šedi
+
+
+ Singleband pseudocolor
+ Jedno pásmo - pseudobarvy
+
+
+ Singleband color data
+ Jedno pásmo - barevná data
+
+
+ All Ramps
+ Všechny rozsahy
+
+
+ Single Symbol
+ Jednoduchý symbol
+
+
+ Categorized
+ Kategorizovaný
+
+
+ Graduated
+ Odstupňovaný
+
+
+ Rule-based
+ Podle pravidla
+
+
+ Point displacement
+ Posunutí bodů
+
+
+ Inverted polygons
+
+
+ Simple line
+ Jednoduchá čára
+
+
+ Marker line
+ Čára se značkami
+
+
+ Simple marker
+ Jednoduchá značka
+
+
+ SVG marker
+ SVG značka
+
+
+ Font marker
+ Textová značka
+
+
+ Ellipse marker
+ Elipsa
+
+
+ Vector Field marker
+ Vektorové pole
+
+
+ Simple fill
+ Jednoduchá výplň
+
+
+ Gradient fill
+
+
+ Shapeburst fill
+
+
+ SVG fill
+ SVG výplň
+
+
+ Centroid fill
+ Centroidové vyplnění
+
+
+ Line pattern fill
+ Výplň liniovým vzorkem
+
+
+ Point pattern fill
+ Výplň bodovým vzorkem
+
+
+ Where is '%1' (original location: %2)?
+ Kde je '%1' (původní umístění: %2)?
+
+
+ QGIS rocks!
+ QGIS je super!
+
+
+ <html>QGIS rocks!</html>
+ <html>QGIS je super!</html>
+
+
+ Raster Histogram
+ Histogram rastru
+
+
+ Pixel Value
+ Hodnota pixelu
+
+
+ Frequency
+ Frekvence
+
+
+ Internal Compass
+ Vnitřní kompas
+
+
+ Shows a QtSensors compass reading
+ Zobrazí údaj z kompasu QtSensors
+
+
+ Version 0.9
+ Verze 0.9
+
+
+ Coordinate Capture
+ Získání souřadnic
+
+
+ Capture mouse coordinates in different CRS
+ Získání souřadnic myši v různých souřadnicových referenčních systémech
+
+
+ Vector
+ Vektor
+
+
+ Version 0.1
+ Verze 0,1
+
+
+ Version 0.2
+ Verze 0,2
+
+
+ Layers
+ Vrstvy
+
+
+ Dxf2Shp Converter
+ Konvertor Dxf2Shp
+
+
+ Converts from dxf to shp file format
+ Konvertuje z formátu dxf do formátu shp
+
+
+ eVis
+ eVis
+
+
+ An event visualization tool - view images associated with vector features
+ Nástroj vizualizace událostí - zobrazí obrázky asociované s vektorovými prvky
+
+
+ Database
+ Databáze
+
+
+ Version 1.1.0
+ Verze 1.1.0
+
+
+ Warning
+ Upozornění
+
+
+ This tool only supports vector data
+ Tento nástroj podporuje pouze vektorová data
+
+
+ No active layers found
+ Nenalezeny žádné aktivní vrstvy
+
+
+ Georeferencer GDAL
+ Georeferencovač GDAL
+
+
+ Georeferencing rasters using GDAL
+ Georeferencován rastrů pomocí GDAL
+
+
+ Raster
+ Rastr
+
+
+ Could not reproject view extent: %1
+
+
+ Could not reproject layer extent: %1
+
+
+ Version 3.1.9
+ Verze 3.1.9
+
+
+ Fit to a linear transform requires at least 2 points.
+ Lineární transformace vyžaduje nejméně 2 body.
+
+
+ Fit to a Helmert transform requires at least 2 points.
+ Helmertova transformace vyžaduje nejméně 2 body.
+
+
+ Fit to an affine transform requires at least 4 points.
+ Afiní transformace vyžaduje nejméně 4 body.
+
+
+ Fitting a projective transform requires at least 4 corresponding points.
+ Aplikace projektivní transformace vyžaduje alespoň 4 odpovídající body.
+
+
+ Globe
+ Globus
+
+
+ Overlay data on a 3D globe
+ Překrýt data přes 3D globus
+
+
+ GPS Tools
+ GPS nástroje
+
+
+ Tools for loading and importing GPS data
+ Nástroje pro načtení a import dat GPS
+
+
+ Location: %1
+ Umístění: %1
+
+
+ Location: %1<br>Mapset: %2
+ Umístění: %1<br>Mapset: %2
Driver
Řadič
-
- Database
- Databáze
-
Table
@@ -11563,178 +10276,24 @@ Chcete zadat cestu (GISBASE) k instalaci programu GRASS?
S-J 3D rozlišení
- GISBASE is not set.
- GISBASE není nastavena.
+ GRASS
+ GRASS
- Mapset is already in use.
- Mapset se právě používá.
+ GRASS layer
+ Vrstva GRASSu
- Warning
- Upozornění
+ Heatmap
+ Teplotní mapa
- This tool only supports vector data
- Tento nástroj podporuje pouze vektorová data
-
-
- No active layers found
- Nenalezeny žádné aktivní vrstvy
-
-
- Cannot read raster map region
- Nelze číst region rastrové mapy
-
-
- Cannot read vector map region
- Nelze číst region vektorové mapy
-
-
- Cannot read region
- Nelze číst region
-
-
- PostgreSQL Geoprocessing
- PostgreSQL Geoprocessing
-
-
- Quick Print
- Rychlý Tisk
-
-
- Quick Print is a plugin to quickly print a map with minimal effort.
- Rychlý Tisk je zásuvný modul pro rychlý tisk mapy s minimální úsilím.
-
-
- Abort
- Přerušit
-
-
- The extra plugin path '%1' does not exist !
-
-
- Couldn't load SIP module.
- Nelze načíst modul SIP.
-
-
- Python support will be disabled.
- Podpora Pythonu bude zrušena.
-
-
- Couldn't set SIP API versions.
- Nemohl jsem nastavit SIP API verzí.
-
-
- Couldn't load PyQt4.
- Nelze načíst PyQt4.
-
-
- Couldn't load PyQGIS.
- Nelze načíst PyQGIS.
-
-
- Couldn't load QGIS utils.
- Nemohu načíst nástroje QGISu.
-
-
- Python version:
- Verze Pythonu:
-
-
- QGIS version:
- QGIS verze:
-
-
- Python path:
- Python cesta:
-
-
- An error occured during execution of following code:
- Během vykonávání následujícího kódu se objevila chyba:
-
-
- Coordinate Capture
- Získání souřadnic
-
-
- Capture mouse coordinates in different CRS
- Získání souřadnic myši v různých souřadnicových referenčních systémech
-
-
- Vector
- Vektor
-
-
- Dxf2Shp Converter
- Konvertor Dxf2Shp
-
-
- Converts from dxf to shp file format
- Konvertuje z formátu dxf do formátu shp
-
-
- Interpolating...
- Probíhá interpolace...
+ Creates a Heatmap raster for the input point vector
+ Vytvoří rastr teplotní mapy ze vstupních vektorových bodů
Verze 0.001
- OGR Layer Converter
- Konvertor OGR vrstvy
+ OfflineEditing
+ OfflineEditace
- Translates vector layers between formats supported by OGR library
- Transformuje vektorové vrstvy mezi formáty podporovanými knihovnou OGR
+ Allow offline editing and synchronizing with database
+ Povolit offline editaci a synchronizaci s databází
- Python is not enabled in QGIS.
- Python není zapnut v QGISu.
+ Oracle Spatial GeoRaster
+ Oracle Spatial GeoRaster
- Plugins
- Zásuvné moduly
+ Access Oracle Spatial GeoRaster
+ Přistupovat k Oracle Spatial GeoRaster
- Plugin "%1" is not compatible with this version of Quantum GIS.
-It will be disabled.
- Zásuvný modul "%1" není kompatibilní s touto verzí Quantum GISu.
-Bude zakázán.
+ Raster Terrain Analysis plugin
+ Zásuvný modul analýzy terénu rastru
- Plugin "%1" is not compatible with this version of QGIS.
-It will be disabled.
- Zásuvný modul "%1" není kompatibilní s touto verzí QGISu.
-Bude vypnut.
+ A plugin for raster based terrain analysis
+ Zásuvný modul pro analýzu terénu rastrových dat
- Loaded %1 (package: %2)
- Načteno %1 (balíček: %2)
+ Road graph plugin
+ Zásuvný modul silničního grafu
- Library name is %1
-
- Název knihovny je %1
+ It solves the shortest path problem.
+ Řeší problém nejkratší cesty.
- Failed to load %1 (Reason: %2)
- Selhalo načtení %1 (důvod: %2)
+ Processing 1/2 - %p%
+ Zpracovávám 1/2 - %p%
- Attempting to resolve the classFactory function
-
- Pokouším se vyřešit funkci classFactory
-
+ Processing 2/2 - %p%
+ Zpracovávám 2/2 - %p%
- Loaded %1 (Path: %2)
- Načteno %1 (cesta: %2)
+ Intersects
+ Protíná
- Error Loading Plugin
- Chyba při načítání zásuvného modulu
+ Is disjoint
+ Je rozpojený
- There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
-%1.
- Chyba při načátání zásuvného modulu. Následující diagnostické informace mohou pomoci QGIS vývojářům vyřešit problém:
-%1.
+ Touches
+ Dotýká se
- Unable to find the class factory for %1.
- Nemohu najít class factory pro %1.
+ Crosses
+ Kříží se s
- Plugin %1 did not return a valid type and cannot be loaded
- Zásuvný modul %1 nevrátil platný typ a nemohl být načten
+ Within
+ Uvnitř
- Where is '%1' (original location: %2)?
- Kde je '%1' (původní umístění: %2)?
+ Contains
+ Obsahuje
- Error when reading metadata of plugin %1
- Chyba při načítání metadat zásuvného modulu %1
+ Equals
+ Je stejný jako
- No QGIS data provider plugins found in:
-%1
-
- Nenalezeny žádné zásuvné moduly poskytovatelů dat QGISu v:
-%1
+ Overlaps
+ Překrývá
- Referenced column wasn't found: %1
- Zmíněný sloupec nebyl nalezen: %1
+ Spatial Query Plugin
+ Zásuvný modul prostorových dotazů
- Georeferencer GDAL
- Georeferencovač GDAL
+ A plugin that makes spatial queries on vector layers
+ Modul který umožňuje tvorbu prostorových dotazů na vektorové vrstvy
- Georeferencing rasters using GDAL
- Georeferencován rastrů pomocí GDAL
+ SPIT
+ SPIT
- Raster
- Rastr
+ Shapefile to PostgreSQL/PostGIS Import Tool
+ Importovací nástroj Shapefile do PostgreSQL/postGIS
- Could not reproject view extent: %1
- Nelze překreslit rozsah zobrazení: %1
+ SQL Anywhere plugin
+ SQL kdekoliv - zásuvný modul
- Could not reproject layer extent: %1
- Nelze překreslit rozsah vrstvy: %1
+ Store vector layers within a SQL Anywhere database
+ Skladuje vektorové vrstvy v databázi SQL Kdekoliv
- Version 3.1.9
- Verze 3.1.9
+ Zonal statistics plugin
+ Zásuvný modul zonální statistiky
- Location: %1
- Umístění: %1
+ A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
+ Zásuvný modul pro výpočet počtu, součtu, průměru rastrů pro každý polygon vektorové vrstvy
- Location: %1<br>Mapset: %2
- Umístění: %1<br>Mapset: %2
+ Cannot open GDAL MEM dataset %1: %2
+ Nemohu otevřít GDAL MEM dataset %1: %2
+
+
+ Cannot GDALCreateGenImgProjTransformer:
+ Nemohu použít GDALCreateGenImgProjTransformer:
+
+
+ Cannot inittialize GDALWarpOperation :
+ Nemohu spustit GDALWarpOperation :
+
+
+ Cannot ChunkAndWarpImage: %1
+ Nemohu použít ChunkAndWarpImage: %1
+
+
+ GDAL/OGR VSIFileHandler
+ GDAL/OGR VSIFileHandler
+
+
+ This raster file has no bands and is invalid as a raster layer.
+ Tento rastrový soubor nemá pásma a je neplatný jako rastrová vrstva.
+
+
+ Cannot get GDAL raster band: %1
+ Nemohu získat GDAL rastrové pásmo: %1
+
+
+ Nearest Neighbour
+ Nejbližší soused
+
+
+ Average
+ Průměr
+
+
+ Gauss
+ Gauss
+
+
+ Cubic
+ Kubický
+
+
+ Mode
+ Režim
+
+
+ None
+ Žádná
Parse error at line %1 : %2
Chyba parsování na řádku %1 : %2
+
+ GPS eXchange format provider
+ Poskytovatel GPS eXchange formátu
+
+
+ GRASS plugin
+ GRASS zásuvný modul
+
+
+ QGIS couldn't find your GRASS installation.
+Would you like to specify path (GISBASE) to your GRASS installation?
+ QGIS nemůže nalézt instalaci programu GRASS.
+Chcete zadat cestu (GISBASE) k instalaci programu GRASS?
+
+
+ Choose GRASS installation path (GISBASE)
+ Vyberte cestu k instalaci GRASSu (GISBASE)
+
+
+ GRASS data won't be available if GISBASE is not specified.
+ GRASS data nejsou dostupná, pokud GISBASE není určena.
+
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
+
+ GISBASE is not set.
+ GISBASE není nastavena.
Cannot start %1/etc/lock
Nemohu spustit %1/etc/lock
+
+ Mapset is already in use.
+ Mapset se právě používá.
+
Temporary directory %1 exists but is not writable
@@ -11970,6 +10604,21 @@ Bude vypnut.
Cannot open vector %1 in mapset %2
Nemohu otevřít vektor %1 v mapsetu %2
+
+ Cannot read raster map region
+ Nelze číst region rastrové mapy
+
+
+ Cannot read vector map region
+ Nelze číst region vektorové mapy
+
+
+ Cannot read region
+ Nelze číst region
+
Cannot open GISRC file
@@ -12021,954 +10670,6 @@ Bude vypnut.
Cannot query raster
Nemohu dotazovat rastr
-
- Oracle Spatial GeoRaster
- Oracle Spatial GeoRaster
-
-
- Access Oracle Spatial GeoRaster
- Přistupovat k Oracle Spatial GeoRaster
-
-
- Deleted vertices
- Smazány uzly
-
-
- Moved vertices
- Přesunuty uzly
-
-
- eVis
- eVis
-
-
- An event visualization tool - view images associated with vector features
- Nástroj vizualizace událostí - zobrazí obrázky asociované s vektorovými prvky
-
-
- Version 1.1.0
- Verze 1.1.0
-
-
- Building triangulation...
- Vytvářím triangulaci...
-
-
- Estimating normal derivatives...
- Odhaduji normálové odvozeniny...
-
-
- Could not open CRS database %1<br>Error(%2): %3
- Nemohu otevřít databázi SRS %1<br>Chyba(%2): %3
-
-
- Could not open CRS database %1
-Error(%2): %3
- Nemohu otevřít databázi SRS %1
-Chyba(%2): %3
-
-
- CRS
- SRS
-
-
- Generated CRS
- A CRS automatically generated from layer info get this prefix for description
- Vytvořený SRS
-
-
- Saved user CRS [%1]
- uložen uživatelský SRS [%1]
-
-
- Imported from GDAL
- Importován z GDAL
-
-
- Raster Terrain Analysis plugin
- Zásuvný modul analýzy terénu rastru
-
-
- A plugin for raster based terrain analysis
- Zásuvný modul pro analýzu terénu rastrových dat
-
-
- infinite
- nekonečno
-
-
- W
- Z
-
-
- E
- V
-
-
- S
- J
-
-
- N
- S
-
-
- Diagram Overlay
- Překrytí diagramem
-
-
- Diagram Overlay (Legacy)
- Překrytí diagramem (staré)
-
-
- A plugin for placing diagrams on vector layers
- Zásuvný modul pro umístění diagramu na vektorové vrstvy
-
-
- Version 0.0.1 (Legacy)
- Verze 0.0.1 (Legacy)
-
-
- Version 0.0.1
- Verze 0.0.1
-
-
- Single Symbol
- Jednoduchý symbol
-
-
- Categorized
- Kategorizovaný
-
-
- Graduated
- Odstupňovaný
-
-
- Rule-based
- Podle pravidla
-
-
- Point displacement
- Posunutí bodů
-
-
- Inverted polygons
-
-
- %n geometry error(s) found.
- number of geometry errors
-
- %n chyba geometrie nalezena.
- %n chyby geometrie nalezeny.
- %n chyb geometrie nalezeno.
-
-
-
- invalid line
- neplatná linie
-
-
- segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
- segment %1 prstence %2 polygonu %3 protíná segment %4 prstence %5 polygonu %6 na %7
-
-
- stopping validation after more than 100 errors
- ukončuji validaci po více než 100 chybách
-
-
- ring %1 with less than three points
- prstenec %1 s méně než třemi body
-
-
- ring %1 with less than four points
- prstenec %1 s méně než čtyřmi body
-
-
- ring %1 not closed
- prstenec %1 není uzavřen
-
-
- line %1 with less than two points
- linie %1 s méně než dvěma body
-
-
- line %1 contains %n duplicate node(s) at %2
- number of duplicate nodes
-
- linie %1 obsahuje %n duplicitní uzel na %2
- linie %1 obsahuje %n duplicitní uzly na %2
- linie %1 obsahuje %n duplicitních uzlů %2
-
-
-
- segments %1 and %2 of line %3 intersect at %4
- segmenty %1 a %2 z linie %3 se protínají na %4
-
-
- ring %1 of polygon %2 not in exterior ring
- prstenec %1 polygonu %2 není ve vnějším kruhu
-
-
- GEOS error:could not produce geometry for GEOS (check log window)
- GEOS chyba:nemohu vytvořit geometrii pro GEOS (zkontrolujte okno výpisů)
-
-
- GEOS error:%1
- GEOS chyba:%1
-
-
- polygon %1 has no rings
- polygon %1 nemá prstence
-
-
- polygon %1 inside polygon %2
- polygon %1 je uvnitř polygonu %2
-
-
- Unknown geometry type
- Neznámý typ geometrie
-
-
- Unknown geometry type %1
- Neznámý typ geometrie %1
-
-
- Geometry validation was aborted.
- Ověření platnosti geometrie bylo přerušeno.
-
-
- Geometry is valid.
- Geometrie je platná.
-
-
- Geometry has %1 errors.
- Geometrie má %1 chyb.
-
-
- OGR driver for '%1' not found (OGR error: %2)
- Ovladač OGR pro '%1' nenalezen (chyba OGR: %2)
-
-
- trimming attribute name '%1' to ten significant characters produces duplicate column name.
- oříznutí jména atributu '%1' na deset významných znaků produkuje duplcitní názvy sloupců.
-
-
- creation of data source failed (OGR error:%1)
- vytvoření datového zdroje selhalo (chyba OGR:%1)
-
-
- creation of layer failed (OGR error:%1)
- vytvoření vrstvy selhalo (chyba OGR:%1)
-
-
- unsupported type for field %1
- nepodporovaný typ pro pole %1
-
-
- no available replacement for internal fieldname ogc_fid found
-
-
- Reserved attribute name ogc_fid replaced with %1
-
-
- creation of field %1 failed (OGR error: %2)
- vytvoření pole %1 selhalo (chyba OGR: %2)
-
-
- created field %1 not found (OGR error: %2)
- vytvořené pole %1 nenalezeno (OGR chyba: %2)
-
-
- By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
-
- By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
-
- Field separator character.
-
-
- Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
-
- Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
-
- Invalid variant type for field %1[%2]: received %3 with type %4
- Neplatný typ varianty pro pole %1[%2]: získáno %3 s typem %4
-
-
- Feature geometry not imported (OGR error: %1)
- Geometrie prvku nenaimportována (OGR chyba: %1)
-
-
- Feature creation error (OGR error: %1)
- Chyba vytvoření prvku (OGR chyba: %1)
-
-
- Failed to transform a point while drawing a feature of type '%1'. Writing stopped. (Exception: %2)
- Selhalo převedení bodu při vykreslování prvku typu '%1'. Zápis zastaven. (Výjimka: %2)
-
-
- Feature write errors:
- Chyby zápisu prvku:
-
-
- Stopping after %1 errors
- Zstavuji po %1 chybách
-
-
-
-Only %1 of %2 features written.
-
-Pouze %1 z %2 prvků zapsáno.
-
-
- Arc/Info ASCII Coverage
- Arc/Info ASCII Coverage
-
-
- Atlas BNA
- Atlas BNA
-
-
- Comma Separated Value
- Hodnoty oddělené čárkou
-
-
- ESRI Shapefile
- ESRI Shapefile
-
-
- DBF file
-
-
- FMEObjects Gateway
- FMEObjects Gateway
-
-
- New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
-
- BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
-
- The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
-
- Limit the number of coordinate pairs per line in multiline format.
-
-
- Set the number of decimal for coordinates. Default value is 10.
-
-
- By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
-
- Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
-
- Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
-
- Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
-
- set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
-
- Set to YES to resize fields to their optimal size.
-
-
- DBF File
-
-
- Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
-
- Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
-
- GeoJSON
- GeoJSON
-
-
- whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
-
- The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
-
- If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
-
- If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
-
- XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
-
- Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- GeoRSS
- GeoRSS
-
-
- If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
-
- This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
-
- This is the prefix for the application target namespace.
-
-
- Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
-
- Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
-
- If not specified, GML2 will be used.
-
-
- only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
-
- only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
-
- Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
-
- Geography Markup Language [GML]
- Geography Markup Language [GML]
-
-
- Generic Mapping Tools [GMT]
- Generic Mapping Tools [GMT]
-
-
- By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
-
- By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
-
- If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
-
- Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
-
- Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
-
- By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
-
- GPS eXchange Format [GPX]
- GPS eXchange Format [GPX]
-
-
- Allows you to specify the field to use for the KML <name> element.
-
-
- Allows you to specify the field to use for the KML <description> element.
-
-
- Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
-
- Keyhole Markup Language [KML]
- Keyhole Markup Language [KML]
-
-
- Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
-
- Mapinfo TAB
- Mapinfo TAB
-
-
- Mapinfo MIF
- Mapinfo MIF
-
-
- Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
-
- Override the seed file to use.
-
-
- Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
-
- Indicates whether the color table should be copied from the seed file.
-
-
- Override the master unit name from the seed file with the provided one or two character unit name.
-
-
- Override the sub unit name from the seed file with the provided one or two character unit name.
-
-
- Override the number of subunits per master unit. By default the seed file value is used.
-
-
- Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
-
- ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
-
- Should update files be incorporated into the base data on the fly.
-
-
- Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
-
- Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
-
- If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
-
- Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
-
- Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
-
- Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
-
- Spatial Data Transfer Standard [SDTS]
- Spatial Data Transfer Standard [SDTS]
-
-
- Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
-
- Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
-
- Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
-
- column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
-
- Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
-
- If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
-
- If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
-
- Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
-
- SpatiaLite
- SpatiaLite
-
-
- Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
-
- When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
-
- Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
-
- Name of the OID column to create. Defaults to 'OBJECTID'.
-
-
- ESRI FileGDB
- ESRI FileGDB
-
-
- Cannot overwrite a OGR layer in place
-
-
- Failed to transform, writing stopped. (Exception: %1)
- Transformace selhala, zápis zastaven. (Výjimka: %1)
-
-
- INTERLIS 1
- INTERLIS 1
-
-
- Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
- Transformace bodu selhala při vykreslování prvku s ID '%1'. Zápis zastaven. (Výjimka: %2)
-
-
- INTERLIS 2
- INTERLIS 2
-
-
- Mapinfo File
- MapInfo soubory
-
-
- Microstation DGN
- Microstation DGN
-
-
- S-57 Base file
- S-57 Base file
-
-
- SQLite
- SQLite
-
-
- AutoCAD DXF
- AutoCAD DXF
-
-
- Geoconcept
- Geoconcept
-
-
- Groups not yet supported
- Skupiny nejsou ještě podporovány
-
Nemohu vykreaslit rastr
- CRS undefined - defaulting to project CRS
- SRS nedefinován - nastavuji na SRS projektu
+ Loading of the MSSQL provider failed
+ Načítání poskytovatele MSSQL selhalo
- CRS undefined - defaulting to default CRS: %1
- SRS nedefinován - nastavuji na výchozí SRS projektu: %1
+ Unsupported type for field %1
+ Nepodporovaný typ pro pole %1
- Reading raster
- Načítám rastr
-
-
- To select features, choose a vector layer in the legend
- Pro výběr prvků zvolte vektorovou vrstvu v legendě
-
-
- CRS undefined - defaulting to default CRS
- SRS nedefinován - nastavuji na výchozí SRS
-
-
- QGIS rocks!
- QGIS je super!
-
-
- <html>QGIS rocks!</html>
- <html>QGIS je super!</html>
-
-
- Displacement plugin
- Zásuvný modul přemístění
-
-
- Adds a new renderer that automatically handles point displacement in case they have the same position
- Přidá nový vykreslovač, který automaticky přemístí body v případě, že mají stejnou pozici
-
-
- Point Displacement
- Posunutí bodu
-
-
- Processing 1/2 - %p%
- Zpracovávám 1/2 - %p%
-
-
- Processing 2/2 - %p%
- Zpracovávám 2/2 - %p%
-
-
- Intersects
- Protíná
-
-
- Disjoint
- Rozpojit
-
-
- Is disjoint
- Je rozpojený
-
-
- Touches
- Dotýká se
-
-
- Crosses
- Kříží se s
-
-
- Within
- Uvnitř
-
-
- Contains
- Obsahuje
-
-
- Equals
- Je stejný jako
-
-
- Overlaps
- Překrývá
-
-
- Spatial Query Plugin
- Zásuvný modul prostorových dotazů
-
-
- A plugin that makes spatial queries on vector layers
- Modul který umožňuje tvorbu prostorových dotazů na vektorové vrstvy
-
-
- SQLite DB (*.sqlite *.db);;All files (*)
- SQLite DB (*.sqlite *.db);;Všechny soubory (*)
-
-
- minidump written to %1
- minivýpis zapsán do %1
-
-
- writing of minidump to %1 failed (%2)
- zápis minivýpisu do %1 selhal (%2)
-
-
- creation of minidump to %1 failed (%2)
- vytváření minivýpisu do %1 selhalo (%2)
-
-
- Crash dumped
- Data o pádu vypsána
-
-
- QGIS starting in non-interactive mode not supported.
-You are seeing this message most likely because you have no DISPLAY environment variable set.
-
- Start QGISu v neinteraktivním režimu není podporován.
-Tuto zprávu vidíte nejspíš proto, že nemáte nastavenou proměnnou DISPLAY.
-
-
- Simple line
- Jednoduchá čára
-
-
- Marker line
- Čára se značkami
-
-
- Line decoration
- Dekorace čáry
-
-
- Simple marker
- Jednoduchá značka
-
-
- SVG marker
- SVG značka
-
-
- Font marker
- Textová značka
-
-
- Ellipse marker
- Elipsa
-
-
- Vector Field marker
- Vektorové pole
-
-
- Simple fill
- Jednoduchá výplň
-
-
- Gradient fill
-
-
- Shapeburst fill
-
-
- SVG fill
- SVG výplň
-
-
- Centroid fill
- Centroidové vyplnění
-
-
- Line pattern fill
- Výplň liniovým vzorkem
-
-
- Point pattern fill
- Výplň bodovým vzorkem
-
-
- No active vector layer
- Žádná aktivní vrstva
-
-
- To select features, you must choose a vector layer by clicking on its name in the legend
- Pro vybrání prvku, musíte vybrat vektorovou vrstvu kliknutím na její jméno v legendě
-
-
- CRS Exception
- Výjimka CRS
-
-
- Selection extends beyond layer's coordinate system.
- Výběr přesahuje mimo souřadnicový systém vrstvy.
-
-
- Raster Histogram
- Histogram rastru
-
-
- Pixel Value
- Hodnota pixelu
-
-
- Frequency
- Frekvence
-
-
- Choose a file name to save the map image as
- Vyberte název souboru obrázku, do kterého se má mapa uložit
-
-
- OfflineEditing
- OfflineEditace
-
-
- Allow offline editing and synchronizing with database
- Povolit offline editaci a synchronizaci s databází
-
-
- Road graph plugin
- Zásuvný modul silničního grafu
-
-
- It solves the shortest path problem.
- Řeší problém nejkratší cesty.
-
-
- SQL Anywhere plugin
- SQL kdekoliv - zásuvný modul
-
-
- Store vector layers within a SQL Anywhere database
- Skladuje vektorové vrstvy v databázi SQL Kdekoliv
+ Creation of fields failed
+ Vytvoření polí selhalo
OGR[%1] error %2: %3
OGR[%1] chyba %2: %3
-
- OGR
- OGR
-
Unable to create the datasource. %1 exists and overwrite flag is false.
@@ -13306,6 +10721,11 @@ Tuto zprávu vidíte nejspíš proto, že nemáte nastavenou proměnnou DISPLAY.
DODS
DODS
+
+ OpenFileGDB
+
GeoPackage
-
Informix DataBlade
Informix DataBlade
-
- INGRES
- INGRES
-
Ingres
Ingres
+
+ Mapinfo File
+ MapInfo soubory
+
MySQL
@@ -13371,11 +10792,6 @@ Tuto zprávu vidíte nejspíš proto, že nemáte nastavenou proměnnou DISPLAY.
OGDI Vectors
OGDI Vektory
-
- OpenFileGDB
-
PostgreSQL
@@ -13384,17 +10800,17 @@ Tuto zprávu vidíte nejspíš proto, že nemáte nastavenou proměnnou DISPLAY.
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
Nemohu vytvořit soubor %1.qpj
- Cannot get GDAL raster band: %1
- Nemohu získat GDAL rastrové pásmo: %1
-
-
- Cannot open GDAL MEM dataset %1: %2
- Nemohu otevřít GDAL MEM dataset %1: %2
-
-
- Cannot GDALCreateGenImgProjTransformer:
- Nemohu použít GDALCreateGenImgProjTransformer:
-
-
- Cannot inittialize GDALWarpOperation :
- Nemohu spustit GDALWarpOperation :
-
-
- Cannot ChunkAndWarpImage: %1
- Nemohu použít ChunkAndWarpImage: %1
-
-
- [GDAL] All files (*)
- [GDAL] Všechny soubory (*)
-
-
- GDAL/OGR VSIFileHandler
- GDAL/OGR VSIFileHandler
-
-
- This raster file has no bands and is invalid as a raster layer.
- Tento rastrový soubor nemá pásma a je neplatný jako rastrová vrstva.
-
-
- Nearest Neighbour
- Nejbližší soused
-
-
- Average
- Průměr
-
-
- Gauss
- Gauss
-
-
- Cubic
- Kubický
-
-
- Mode
- Režim
-
-
- None
- Žádná
-
-
- day
- Note: Word is part matched in code
- den
-
-
- days
- Note: Word is part matched in code
- dny
-
-
- week
- Note: Word is part matched in code
- týden
-
-
- weeks
- Note: Word is part matched in code
- týdny
-
-
- month
- Note: Word is part matched in code
- měsíc
-
-
- months
- Note: Word is part matched in code
- měsíce
-
-
- year
- Note: Word is part matched in code
- rok
-
-
- years
- Note: Word is part matched in code
- let
-
-
- second
- Note: Word is part matched in code
- sekunda
-
-
- seconds
- Note: Word is part matched in code
- sekund
-
-
- minute
- Note: Word is part matched in code
- minuta
-
-
- minutes
- Note: Word is part matched in code
- minut
-
-
- hour
- Note: Word is part matched in code
- hodina
-
-
- hours
- Note: Word is part matched in code
- hodin
-
-
- Cannot convert '%1' to double
- Nemohu převést '%1' na double
-
-
- Cannot convert '%1' to int
- Nemohu převést '%1' na int
-
-
- Cannot convert '%1' to DateTime
- Nemohu převést '%1' na Datum-čas
-
-
- Cannot convert '%1' to Date
- Nemohu převést '%1' na Datum
-
-
- Cannot convert '%1' to Time
- Nemohu převést '%1' na Čas
-
-
- Cannot convert '%1' to Interval
- Nemohu převést '%1' na Interval
-
-
- Cannot convert '%1' to boolean
- Nemohu převést '%1' na boolean
-
-
- Domain max must be greater than domain min
- Domain max musí být vyšší než domain min
-
-
- Exponent must be greater than 0
- Exponent musí být vyšší než 0
-
-
- Invalid regular expression '%1': %2
- Neplatný regulární výraz '%1': %2
-
-
- Index is out of range
- Index je mimo rozsah
-
-
- Cannot convert '%1:%2:%3' to color
- Nemohu převést '%1:%2:%3' na barvu
-
-
- Cannot convert '%1:%2:%3:%4' to color
- Nemohu převést '%1:%2:%3:%4' na barvu
-
-
- "%1" is not a valid color ramp
- "%1" není platný barevný přechod
-
-
- Cannot convert '%1:%2:%3:%4:%5' to color
- Nemohu převést '%1:%2:%3:%4:%5' na barvu
-
-
- function help for %1 missing
- nápověda funkce pro %1 chybí
-
-
- Operators
- Operátory
-
-
- Fields and Values
- Pole a hodnoty
-
-
- Math
- Matematika
-
-
- Conversions
- Převody
-
-
- Conditionals
- Kondicionály
-
-
- second|seconds
- list of words separated by | which reference years
-
-
- minute|minutes
- list of words separated by | which reference minutes
-
-
- hour|hours
- list of words separated by | which reference minutes hours
-
-
- day|days
- list of words separated by | which reference days
-
-
- week|weeks
- wordlist separated by | which reference weeks
-
-
- month|months
- list of words separated by | which reference months
-
-
- year|years
- list of words separated by | which reference years
-
-
- Date and Time
- Datum a čas
-
-
- String
- Řetězec
-
-
- Color
- Barva
-
-
- Geometry
- Geometrie
-
-
- Record
- Záznam
-
-
- Special
- Speciální
-
-
- No root node! Parsing failed?
- Žádný kořenový uzel! Parsování selhalo?
-
-
- (no root)
- (žádný kořen)
-
-
- Unary minus only for numeric values.
- Unární minus pouze pro číselné hodnoty.
-
-
- Can't preform /, *, or % on DateTime and Interval
- Nemohu předvytvořit /, *, nebo % v DateTime a Interval
-
-
- [unsupported type;%1; value:%2]
- [nepodporovaný typ;%1; hodnota:%2]
-
-
- Column '%1' not found
- Sloupec '%1' nenalezen
-
-
- Column '%1'' not found
- Sloupec '%1'' nenalezen
-
-
- Unable to load %1 provider
- Nemohu načíst poskytovatele %1
-
-
- Provider %1 has no %2 method
- Poskytovatel %1 nemá %2 metodu
-
-
- Loaded from Provider
- Načteno od poskytovatele
-
-
- Provider %1 has no createEmptyLayer method
- Poskytovatel %1 nemá metodu createEmptyLayer
-
-
- Loading of layer failed
- Načítání vrstvy selhalo
-
-
- Creation error for features from #%1 to #%2. Provider errors was:
-%3
- Chyba při vytváření prvků z #%1 do #%2. Chyby poskytovatele byly:
-%3
-
-
- Import was canceled at %1 of %2
- Import byl zrušen při %1 z %2
-
-
- Creation error for features from #%1 to #%2
- Chyba vytváření pro prvky od #%1 do #%2
-
-
- Vector import
- Import vektorů
-
-
- Only %1 of %2 features written.
- Pouze %1 z %2 prvků zapsáno.
-
-
- Globe
- Globus
-
-
- Overlay data on a 3D globe
- Překrýt data přes 3D globus
-
-
- Zonal statistics plugin
- Zásuvný modul zonální statistiky
-
-
- A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
- Zásuvný modul pro výpočet počtu, součtu, průměru rastrů pro každý polygon vektorové vrstvy
-
-
- no result buffer
- buffer bez výsledku
+ Fetching features failed.
+SQL:%1
+Error: %2
+ Vyvolání prvků selhalo.
+SQL:%1
+Chyba: %2
+
+
+ Oracle
+ Oracle
Unable to determine number of geometry columns of layer %1.%2:
%3
-
-
- Unable determine number of geometry columns of layer %1.%2:
-%3
- Nemohu určit počet sloupců geometrie vrstvy %1.%2:
-%3
+
Nemohu smazat metadata %1.%2:
%3
+
+ no result buffer
+ buffer bez výsledku
+
+
+ Fetching from cursor %1 failed
+Database error: %2
+ Vyvolání z kurzoru %1 selhalo
+Chyba databáze: %2
+
+
+ PostGIS
+ PostGIS
+
+
+ Infinite filter rectangle specified
+
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
- Loading of the mssql provider failed
- Načítání poskytovatele mssql selhalo
+ SQLite error: %2
+SQL: %1
+ SQLite chyba: %2
+SQL: %1
- Loading of the MSSQL provider failed
- Načítání poskytovatele MSSQL selhalo
-
-
- Unsupported type for field %1
- Nepodporovaný typ pro pole %1
-
-
- Creation of fields failed
- Vytvoření polí selhalo
+ SQLite error getting feature: %1
+ SQLite chyba při získávání prvku: %1
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
- Internal Compass
- Vnitřní kompas
+ The extra plugin path '%1' does not exist !
+
- Shows a QtSensors compass reading
- Zobrazí údaj z kompasu QtSensors
+ Couldn't load SIP module.
+ Nelze načíst modul SIP.
- Version 0.9
- Verze 0.9
+ Python support will be disabled.
+ Podpora Pythonu bude zrušena.
- Heatmap
- Teplotní mapa
+ Couldn't set SIP API versions.
+ Nemohl jsem nastavit SIP API verzí.
- Creates a Heatmap raster for the input point vector
- Vytvoří rastr teplotní mapy ze vstupních vektorových bodů
+ Couldn't load PyQt4.
+ Nelze načíst PyQt4.
- Exception: %1
- Výjimka: %1
+ Couldn't load PyQGIS.
+ Nelze načíst PyQGIS.
- GEOS
- GEOS
+ Couldn't load QGIS utils.
+ Nemohu načíst nástroje QGISu.
- GEOS prior to 3.2 doesn't support GEOSInterpolate
- GEOS před verzí 3.2 nepodporuje GEOSInterpolate
+ An error occured during execution of following code:
+ Během vykonávání následujícího kódu se objevila chyba:
- Console
- Konzole
+ Python version:
+ Verze Pythonu:
- Reading raster part %1 of %2
- Načítám rastr - část %1 z %2
+ QGIS version:
+ QGIS verze:
- Building Pyramids...
- Vytvářím pyramidy...
+ Python path:
+ Python cesta:
- Building pyramids failed - write access denied
- Sestavení pyramid selhalo - přístup k zápisu odmítnut
-
-
- Write access denied. Adjust the file permissions and try again.
- Přístup k zápisu zamítnut. Nastavte oprávnění souboru a zkuste znovu.
-
-
- Building pyramids failed.
- Sestavení pyramid selhalo.
-
-
- The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
- Soubor není přepisovatelný. Některé formáty nepodporují pyramidové přehledy. Pochybnosti konzultujte s dokumentací GDAL.
-
-
- Building pyramid overviews is not supported on this type of raster.
- Sestavení náhledu pyramid není pro tento typ rastrového formátu podporováno.
-
-
- Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
- Vytvoření vnitřních pyramidových přehledů není podporováno u rastrů s JPEG kompresí a vaší aktuální libtiff knihovnou.
-
-
- Multiband color
- Mnohopásmová barva
-
-
- Paletted
- Paletovaný
-
-
- Singleband gray
- Jedno pásmo - šedi
-
-
- Singleband pseudocolor
- Jedno pásmo - pseudobarvy
-
-
- Singleband color data
- Jedno pásmo - barevná data
+ Python error
+ Python chyba
Symbol label
Popisek symbolu
-
- Attribute index %1 out of bounds [0;%2[
- Index atributu %1 mimo meze [0;%2[
-
-
- All Ramps
- Všechny rozsahy
-
Topology Checker
@@ -14455,82 +11345,14 @@ Tuto zprávu vidíte nejspíš proto, že nemáte nastavenou proměnnou DISPLAY.
vícedílný prvek
- Already active iterator on this provider was closed.
- Již aktivní iterátor na tomto poskytovateli byl zavřen.
-
-
- Delimited text
- Oddělený text
-
-
- GPX
- GPX
-
-
- Memory provider
- Poskytovatel paměti
-
-
- Fetching features failed.
-SQL:%1
-Error: %2
- Vyvolání prvků selhalo.
-SQL:%1
-Chyba: %2
-
-
- Oracle
- Oracle
-
-
- Fetching from cursor %1 failed
-Database error: %2
- Vyvolání z kurzoru %1 selhalo
-Chyba databáze: %2
-
-
- PostGIS
- PostGIS
-
-
- Infinite filter rectangle specified
-
-
- Trying to fetch geometry on a layer without geometry.
- Pokouším se vyvolat geometrii ve vrstvě bez geometrie.
-
-
- SQLite error: %2
-SQL: %1
- SQLite chyba: %2
-SQL: %1
-
-
- SQLite error getting feature: %1
- SQLite chyba při získávání prvku: %1
-
-
+ Error describing bind parameters
- Chyba při popisu vázacích parametrů
+ Chyba při popisu vázacích parametrů
+ Error binding parameters
- Chyba vázacích parametrů
-
-
- WFS
- WFS
+ Chyba vázacích parametrů
Attribute index %1 out of bounds [0;%2]
- Index atributu %1 mimo meze [0;%2[ {1 ?} {0;%2]?}
+
Error
- Chyba
+
Layer
- Vrstva
+
Feature ID
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
- Výjimka DOM
+
Nemohu získat WMS schopnosti: %1 na řádku %2 sloupec %3
-To je zřejmě kvůli nesprávnému URL WMS Serveru.
-Odpověď byla:
-
-%4
+
Nemohu získat WMS schopnosti v očekávaném formátu (DTD): ani %1 ani %2 nenalezeno.
-To je zřejmě kvůli nesprávnému URL WMS Serveru.
-Štítek: %3
-Odpověď byla:
-%4
+
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
- Combo box s hodnotami, které mohou být použity v rámci typu sloupce. Musí být podporováno poskytovatelem.
+
Simplifies file selection by adding a file chooser dialog.
- Zjednodušuje editaci přidáním dialogu výběru souboru.
+
A hidden attribute will be invisible - the user is not able to see it's contents.
- Skrytý atribut bude neviditelný - uživatel nebude schopen vidět jeho obsah.
+
Read-only field that generates a UUID if empty.
- Pole jen ke čtení, které vytvoří UUID, pokud je prázdné.
-
-
- Legend
- Legenda
+
QSpatiaLiteDriver
- Error opening database
Chyba při otvírání databáze
- Error closing database
Chyba při zavírání databáze
- Unable to begin transaction
Nemohu zahájit transakci
- Unable to commit transaction
Nemohu provést commit transakci
- Unable to rollback transaction
Nemohu provést rollback transakci
@@ -14735,27 +11544,27 @@ Odpověď byla:
Žádný dotaz
- Unable to execute statement
Nemohu spustit příkaz
- Unable to execute multiple statements at a time
Nemohu spustit více příkazů najednou
- Unable to reset statement
Nemohu resetovat příkaz
- Unable to bind parameters
Nemohu navázat parametry
- Parameter count mismatch
Neshoda počtu parametrů
@@ -14846,654 +11655,19 @@ Odpověď byla:
QgisApp
- Layers
- Vrstvy
+ &Raster
+ &Rastr
- Version
- Verze
+ Multiple Instances of QgisApp
+ Násobné instance QgisApp
- Invalid Data Source
- Nesprávný datový zdroj
-
-
- No Layer Selected
- Není vybraná žádná vrstva
-
-
- There is a new version of QGIS available
- K dispozici je nová verze QGIS
-
-
- You are running a development version of QGIS
- Používáte vývojářskou verzi QGIS
-
-
- You are running the current version of QGIS
- Používáte aktuální verzi QGIS
-
-
- Would you like more information?
- Přejete si bližší informáce?
-
-
- QGIS Version Information
- Informace o verzi QGIS
-
-
- Unable to get current version information from server
- Nelze získat informace ze serveru o aktuální verzi
-
-
- Connection refused - server may be down
- Spojení zamítnuto - server je zřejmě vypnutý
-
-
- QGIS server was not found
- Nebyl nalezen QGIS server
-
-
- Do you want to save the current project? %1
-
-
- Invalid Layer
- Chybná vrstva
-
-
- %1 is an invalid layer and cannot be loaded.
- %1 je chybná vrstva a nemůže být načtená.
-
-
- Problem deleting features
- Problém při mazání objektů
-
-
- A problem occured during deletion of features
- Při mazání objektů se vyskytnul problém
-
-
- No Vector Layer Selected
- Není zvolená žádná vrstva
-
-
- Deleting features only works on vector layers
- Mazání objektů lze použít pouze u vektorových vrstev
-
-
- To delete features, you must select a vector layer in the legend
- Před vymazáním objektu je třeba vybrat vektorovou vrstvu v okně legendy
-
-
- Render
- Vykreslování
-
-
- QGis files (*.qgs)
- QGIS soubory (*.qgs)
-
-
- Choose a QGIS project file
- Vyberte soubor QGIS projektu
-
-
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
- Okno "Mapová legenda", ve kterém jsou zobrazeny všechny vrstvy obsažené v mapovém okně. Kliknutím na zaškrtávací políčko se zapne či vypne daná vrstva. Dvojklik na vrstvu v legendě dovolí nastavit vzhled a ostatní vlastnosti vrstvy.
-
-
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
- Mapový náhled. Tato oblast může být použita pro zobrazení polohy mapy, kde je viditelný právě zobrazený výrez mapy. Aktuálně zobrazený výrez je znázorněn červeným obdelníkem. Do mapového náhledu je možné přidat libovolnou vrstvu.
-
-
- Map canvas. This is where raster and vector layers are displayed when added to the map
- Mapové okno. Toto je oblast, kde budou zobrazeny vektorové a rastrové vrstvy přidané do mapy
-
-
- &Plugins
- Zásuvné &moduly
-
-
- Progress bar that displays the status of rendering layers and other time-intensive operations
- Ukazatel průběhu, který informuje o stavu vykreslování vrstev a jiných časově náročných operácií
-
-
- Displays the current map scale
- Zobrazuje aktuální měřítko mapy
-
-
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
- Pokud je políčko zaškrtnuté, jsou mapové vrstvy vykreslovány v návaznosti na příkazy mapové navigace a jiné události. Pokud není zaškrtnuté, není vykreslená žádná vrstva. To umožnuje přidat množství vrstev a upravit jejich symboliku před samotným vykreslením.
-
-
- QGIS Project Read Error
- Chyba při načítání QGIS projektu
-
-
- Open a GDAL Supported Raster Data Source
- Otevřít rastrový datový zdroj podporovaný knihovnou GDAL
-
-
- Toggle map rendering
- Přepnout vykreslování mapy
-
-
- Save As
- Uložit jako
-
-
- Choose a QGIS project file to open
- Otevřít vybraný soubor QGIS projektu
-
-
- New Project
- Nový projekt
-
-
- &Open Project...
- &Otevřít projekt...
-
-
- Open a Project
- Otevřít projekt
-
-
- &Save Project
- &Uložit projekt
-
-
- Save Project &As...
- Uložit projekt &jako...
-
-
- Save Project under a new name
- Uložit projekt pod novým jménem
-
-
- Save map as image
- Uložit mapu jako obrázek
-
-
- Exit
- Konec
-
-
- Exit QGIS
- Ukončit QGIS
-
-
- Add a Vector Layer
- Přidat vektorovou vrstvu
-
-
- Add a Raster Layer
- Přidat rastrovou vrstvu
-
-
- Add a PostGIS Layer
- Přidat vrstvu PostGIS
-
-
- Remove Layer
- Odebrat vrstvu
-
-
- Remove a Layer
- Odebrat vrstvu
-
-
- Show all layers in the overview map
- Zobrazit všechny vrstvy do náhledu
-
-
- Remove All From Overview
- Odebrat vše z náhledu
-
-
- Remove all layers from overview map
- Odebrat všechny vrstvy z náhledu
-
-
- Show All Layers
- Zobrazit všechny vrstvy
-
-
- Show all layers
- Zobrazit všechny vrstvy
-
-
- Hide All Layers
- Skrýt všechny vrstvy
-
-
- Hide all layers
- Skrýt všechny vrstvy
-
-
- Set project properties
- Nastavit vlastnosti projektu
-
-
- Change various QGIS options
- Změnit různé volby QGISu
-
-
- Help Contents
- Obsah nápovědy
-
-
- Help Documentation
- Nápověda dokumentace
-
-
- QGIS Home Page
- Domovská stránka QGISu
-
-
- About
- O programu
-
-
- About QGIS
- O QGISu
-
-
- Check Qgis Version
- Zkontrolovat verzi QGISu
-
-
- Check if your QGIS version is up to date (requires internet access)
- Zkontrolovat zda je možné aktualizovat vaší verzi QGISu (vyžaduje připojení k Internetu)
-
-
- Refresh
- Obnovit
-
-
- Refresh Map
- Obnovit mapu
-
-
- Zoom In
- Zvětšit
-
-
- Zoom Out
- Zmenšit
-
-
- Zoom Full
- Přiblížit na rozměry okna
-
-
- Zoom to Full Extents
- Celý výřez
-
-
- Pan Map
- Posunout mapu
-
-
- Pan the map
- Posunout mapu
-
-
- Zoom Last
- Zvětšit podle posledního výřezu
-
-
- Zoom to Last Extent
- Zvětšit na poslední výřez
-
-
- Zoom to Layer
- Zvětšit podle vrstvy
-
-
- Identify Features
- Identifikovat prvky
-
-
- Click on features to identify them
- Klikněte na prvek pro jeho identifikaci
-
-
- Select Features
- Vybrat prvek
-
-
- Measure Line
- Měřit vzdálenost
-
-
- Measure a Line
- Měřit vzdálenost
-
-
- Measure Area
- Výměra plochy
-
-
- Measure an Area
- Výměra plochy
-
-
- Show Bookmarks
- Zobrazit záložky
-
-
- New Bookmark
- Nová záložka
-
-
- Add current layer to overview map
- Přidat aktuální vrstvu do náhledu
-
-
- Open the plugin manager
- Otevřít správce zásuvným modulů
-
-
- Capture Point
- Umístit bod
-
-
- Capture Points
- Umístit body
-
-
- Capture Line
- Umístit linii
-
-
- Capture Lines
- Umístit linie
-
-
- Capture Polygon
- Umístit polygon
-
-
- Capture Polygons
- Umístit polygony
-
-
- Delete Selected
- Vymazat vybrané
-
-
- Add Vertex
- Přidat lomový bod
-
-
- Delete Vertex
- Odebrat lomový bod
-
-
- Move Vertex
- Přesunout lomový bod
-
-
- &File
- &Soubor
-
-
- &View
- &Zobrazit
-
-
- &Layer
- &Vrstva
-
-
- &Settings
- &Nastavení
-
-
- &Help
- &Nápověda
-
-
- File
- Soubor
-
-
- Manage Layers
- Spravovat vrstvy
-
-
- Help
- Nápověda
-
-
- Digitizing
- Digitalizace
-
-
- Map Navigation
- Navigace v mapě
-
-
- Attributes
- Atributy
-
-
- Plugins
- Zásuvné moduly
-
-
- Ready
- Připraven
-
-
- Warning
- Upozornění
-
-
- Unable to open project
- Nelze otevřít projekt
-
-
- QGIS
-
-
- CRS undefined - defaulting to project CRS
- SRS nedefinován - nastavuji na SRS projektu
-
-
- CRS undefined - defaulting to default CRS: %1
- SRS nedefinován - nastavuji na výchozí SRS projektu: %1
-
-
- Multiple instances of QGIS application object detected.
-Please contact the developers.
-
-
-
- Browser
- Prohlížeč
-
-
- Browser (2)
- Prohlížeč (2)
-
-
- QGIS - %1 ('%2')
-
-
- Current Edits
- Aktuální změny
-
-
- Compiled against GDAL/OGR
- Zkompilováno s GDAL/OGR
-
-
- Running against GDAL/OGR
- Běží nai GDAL/OGR
-
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
-
- Delimited Text
- Oddělený text
-
-
- Cannot get Delimited Text select dialog from provider.
- Nemohu získat dialog výběru Oddělený text od poskytovatele.
-
-
- QGIS files
- QGis soubory
-
-
- No legend entries selected
-
-
- Select the layers and groups you want to remove in the legend.
-
-
- Remove layers and groups
-
-
- Remove %n legend entries?
- number of legend items to remove
-
-
-
-
- %n legend entries removed.
- number of removed legend entries
-
-
-
-
- %1 (%2 type unsupported)
-
-
- Layer is not valid
- Vrstva není platná
-
-
- The layer is not a valid layer and can not be added to the map
- Vrstva není platnou vrstvou a nemůže být přidána do mapy
-
-
- Save?
- Uložit?
-
-
- Do you want to save the current project?
- Přejete si uložit aktuální projekt?
-
-
- Unsupported Data Source
- Nepodporovaný datový zdroj
-
-
- Enter a name for the new bookmark:
- Zadejte název pro novou záložku:
-
-
- Error
- Chyba
-
-
- Unable to create the bookmark. Your user database may be missing or corrupted
- Nelze vytvořit novou záložku. Vaše uživatelská databáze může chybět nebo být poškozena
+ Checking database
+ Kontroluji databázi
Nastavuji GUI
- Checking database
- Kontroluji databázi
+ Map canvas. This is where raster and vector layers are displayed when added to the map
+ Mapové okno. Toto je oblast, kde budou zobrazeny vektorové a rastrové vrstvy přidané do mapy
+
+
+ Browser
+ Prohlížeč
+
+
+ Browser (2)
+ Prohlížeč (2)
+
+
+ GPS Information
+ GPS informace
+
+
+ Log Messages
+ Zprávy výpisů
+
+
+ QGIS starting...
+ Startuje QGIS...
+
+
+ Checking provider plugins
+ Zkontrolovat poskytovatele zásuvných modulů
+
+
+ Starting Python
+ Spouštím Python
QGIS připraven!
- &New Project
- &Nový projekt
+ Minimize
+ Minimalizovat
- Save as Image...
- Uložit jako obrázek...
+ Ctrl+M
+ Minimize Window
+ Ctrl+M
- Project Properties...
- Vlastnosti projektu...
+ Minimizes the active window to the dock
+ Minimalizovat aktivní okno na ....(lištu?)
- Options...
- Volby...
+ Zoom
+ Zvětšit
- New Bookmark...
- Nová záložka...
+ Toggles between a predefined size and the window size set by the user
+ Přepíná mezi předdefinovanou velikostí a velikostí okna nastavenou uživatelem
- Add WMS/WMTS Layer...
- Přidat vrstvu WMS...
+ Bring All to Front
+ Přesunout vše do popředí
- &Open Recent Projects
- &Otevřít poslední projekt
+ Bring forward all open windows
+ Přesunout všechna okna do pozadí
- Ctrl+N
- New Project
- Ctrl+N
+ Current Edits
+ Aktuální změny
- Ctrl+O
- Open a Project
- Ctrl+O
+ Error
+ Chyba
- Ctrl+S
- Save Project
- Ctrl+S
-
-
- Save Project
- Uložit projekt
-
-
- Ctrl+Q
- Exit QGIS
- Ctrl+Q
-
-
- Ctrl+D
- Remove a Layer
- Ctrl+D
-
-
- F1
- Help Documentation
- F1
-
-
- Ctrl+H
- QGIS Home Page
- Ctrl+H
-
-
- Ctrl+R
- Refresh Map
- Ctrl+R
-
-
- Ctrl+B
- New Bookmark
- Ctrl+B
-
-
- Cut Features
- Vybrat prvky
-
-
- Cut selected features
- Vybrat vybrané prvky
-
-
- Copy Features
- Kopírovat prvky
-
-
- Copy selected features
- Kopírovat vybrané prvky
-
-
- Paste Features
- Vložit prvky
-
-
- Paste selected features
- Vložit vybrané prvky
-
-
- Ctrl+?
- Help Documentation (Mac)
- Ctrl+?
-
-
- Checking provider plugins
- Zkontrolovat poskytovatele zásuvných modulů
-
-
- Starting Python
- Spouštím Python
-
-
- Provider does not support deletion
- Nástroj pro správu dat nepodporuje mazání
-
-
- Data provider does not support deleting features
- Nástroj pro správu data nepodporuje mazání objektů
-
-
- Layer not editable
- Vrstva není editovatelná
-
-
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
- Aktuální vrstva není editovatelná. Vyberte 'Započít editaci' z lišty digitalizace.
-
-
- Toggle editing
- Přepnout editaci
-
-
- Toggles the editing state of the current layer
- Změnit u aktuální vrstvy stav editace
-
-
- Add Ring
- Přidat prstenec
-
-
- Scale
- Měřítko
-
-
- Current map scale (formatted as x:y)
- Aktuální měřítko mapy (ve formě x:y)
-
-
- Map coordinates at mouse cursor position
- Souřadnice mapy v místě kurzoru
-
-
- Invalid scale
- Chybné měřítko
-
-
- Network error while communicating with server
- Chyba sítě při komunikaci se serverem
-
-
- Unknown network socket error
- Neznámá chyba sítě
-
-
- Reshape Features
- Změnit tvar prvků
-
-
- Split Features
- Rozdělit objekt
-
-
- Rotate Point Symbols
- Rotovat symboly bodů
-
-
- Deselect features from all layers
- Zrušit výběr prvků ve všech vrstvách
-
-
- Ctrl+Shift+I
- Click on features to identify them
- Ctrl+Shift+I
-
-
- Ctrl+Shift+M
- Measure a Line
- Ctrl+Shift+M
-
-
- Ctrl+Shift+J
- Measure an Area
- Ctrl+Shift+J
-
-
- Measure Angle
- Měřit úhel
-
-
- Ctrl+Shift+F
- Zoom to Full Extents
- Ctrl+Shift+F
-
-
- Map Tips
- Mapové tipy
-
-
- Show information about a feature when the mouse is hovered over it
- Ukazuje informace o objektech po jejichi přejetí myší
-
-
- Ctrl+Shift+B
- Show Bookmarks
- Ctrl+Shift+B
-
-
- Ctrl+Shift+V
- Add a Vector Layer
- Ctrl+Shift+V
-
-
- Ctrl+Shift+R
- Add a Raster Layer
- Ctrl+Shift+R
-
-
- Ctrl+Shift+D
- Add a PostGIS Layer
- Ctrl+Shift+D
-
-
- Ctrl+Shift+L
- Add a SpatiaLite Layer
- Ctrl+Shift+L
-
-
- Ctrl+Shift+W
- Add a Web Mapping Server Layer
- Ctrl+Shift+W
-
-
- Save edits to current layer, but continue editing
- Uložit úpravy do aktuální vrstvy, ale pokračovat v editaci
-
-
- Failed to open Python console:
Otevření konzole Pythonu selhalo:
- Current map scale
- Aktuální měřítko mapy
+ QGIS
+ QGIS
-
-This copy of QGIS has been built without PostgreSQL support.
-
-Tato kopie QGISu byla vytvořena bez podpory PostgreSQL.
+ Multiple instances of QGIS application object detected.
+Please contact the developers.
+
+
-
-This copy of QGIS has been built with QWT support (%1).
-
-Tato kopie QGISu byla vytvořena s podporou QWT (%1).
+ QGIS - %1 ('%2')
+
-
-This copy of QGIS has been built without QWT support.
-
-Tato kopie QGISu byla vytvořena bez podpory QWT.
+ Panels
+ Panely
-
-This copy of QGIS writes debugging output.
- Tato kopie QGISu zapisuje výstup pro odstranění chyb.
+ Toolbars
+ Nástrojové lišty
- Merge failed
- Sloučení selhalo
-
-
- An error occured during the merge operation
- Během slučování došlo k chybě
-
-
- GPS Information
- GPS informace
-
-
- Log Messages
- Zprávy výpisů
-
-
- QGIS starting...
- Startuje QGIS...
-
-
- Window
Okno
- Vect&or
- Vekt&or
+ &Database
+ &Databáze
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
+ Ukazatel průběhu, který informuje o stavu vykreslování vrstev a jiných časově náročných operácií
+
+
+ Toggle extents and mouse position display
+ Přepnout rozšíření a zobrazení pozice myši
+
+
+ Coordinate:
+ Souřadnice:
+
+
+ Current map coordinate
+ Aktuální souřadnice na mapě
+
+
+ Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Zobrazí mapové souřadnice na aktuální pozici kurzoru. Zobrazení je průběžně aktualizováno během pohybu myši. Také lze upravit a nastavit pozici středu mapového okna na zadané souřadnice. Formát je lat,lon nebo východ, sever
- Current map coordinate (lat,lon or east,north)
Aktuální souřadnice na mapě (lat,lon nebo východ,sever)
- Control rendering order
- Ovládání pořadí vykreslování
+ Scale
+ Měřítko
- Current map scale
+ Aktuální měřítko mapy
+
+
+ Displays the current map scale
+ Zobrazuje aktuální měřítko mapy
+
+
+ Current map scale (formatted as x:y)
+ Aktuální měřítko mapy (ve formě x:y)
+
+
+ Render
+ Vykreslování
+
+
+ When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
+ Pokud je políčko zaškrtnuté, jsou mapové vrstvy vykreslovány v návaznosti na příkazy mapové navigace a jiné události. Pokud není zaškrtnuté, není vykreslená žádná vrstva. To umožnuje přidat množství vrstev a upravit jejich symboliku před samotným vykreslením.
+
+
+ Toggle map rendering
+ Přepnout vykreslování mapy
+
+
+ This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
+ Tato ikona ukazuje, zda je nebo není možná transformace souřadnicového referenčního systému "on the fly". Kliknutím na ikonu získáte dialog vlastností projektu ke změně tohoto chování.
+
+
+ CRS status - Click to open coordinate reference system dialog
+ CRS status - klikněte k otevření dialogu souřadnicového referenčního systému
+
+
+ Ready
+ Připraven
+
+
+ Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
+ Mapový náhled. Tato oblast může být použita pro zobrazení polohy mapy, kde je viditelný právě zobrazený výrez mapy. Aktuálně zobrazený výrez je znázorněn červeným obdelníkem. Do mapového náhledu je možné přidat libovolnou vrstvu.
+
+
+ Overview
+ Náhled
+
+
+ Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
+ Okno "Mapová legenda", ve kterém jsou zobrazeny všechny vrstvy obsažené v mapovém okně. Kliknutím na zaškrtávací políčko se zapne či vypne daná vrstva. Dvojklik na vrstvu v legendě dovolí nastavit vzhled a ostatní vlastnosti vrstvy.
+
+
+ Layers
+ Vrstvy
+
+
+ Map layer list that displays all layers in drawing order.
Seznam vrstev mapy, který zobrazí všechny vrstvy v daném pořadí.
- Layer order
Pořadí vrstev
- [ERROR] Can not make qgis.db private copy
- [CHYBA] Nemohu udělat soukromou kopii qgis.db
+ Private qgis.db
+ Soukromý qgis.db
- Update of view in private qgis.db failed.
-%1
- Aktualizace zobrazení v soukromé qgis.db selhala.
-%1
-
-
- < Blank >
< Prázdný >
- QGIS version
Verze QGISu
- QGIS code revision
Revize kódu QGISu
- Compiled against Qt
Kompilováno proti Qt
- Running against Qt
Běží na Qt
- GDAL/OGR Version
- GDAL/OGR verze
+ Compiled against GDAL/OGR
+ Zkompilováno s GDAL/OGR
- GEOS Version
- GEOS verze
+ Running against GDAL/OGR
+ Běží nai GDAL/OGR
- PostgreSQL Client Version
PostgreSQL klient verze
- No support.
Není podpora.
- SpatiaLite Version
SpatiaLite verze
- QWT Version
QWT verze
- PROJ.4 Version
PROJ.4 Veze
- QScintilla2 Version
QScintilla2 Verze
- This copy of QGIS writes debugging output.
Tato kopie QGISu zapisuje ladící výstup.
- %1 doesn't have any layers
+ %1 nemá žádné vrstvy
+
+
+ Invalid Data Source
+ Nesprávný datový zdroj
+
+
+ %1 is not a valid or recognized data source
+ %1 není platný nebo rozpoznaný zdroj dat
+
+
+ Vector
+ Vektor
+
+
+ PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Nemohu získat dialog výběru PostgreSQL od poskytovatele.
- %1 is an invalid layer - not loaded
%1 je neplatná vrstva - nenačtena
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
+
+
+ QGIS files
+ QGis soubory
+
+
+ No legend entries selected
+
+
+ Select the layers and groups you want to remove in the legend.
+
+
+ Remove layers and groups
+
+
+ Remove %n legend entries?
+ number of legend items to remove
+
+
+ %n legend entries removed.
+ number of removed legend entries
+
+
+ %1 (%2 type unsupported)
+
+
+ http://qgis.org/en/site/forusers/commercial_support.html
+
+
+ Do you want to save the current project? %1
+ Přejete si uložit aktuální projekt?%1
+
+
+ Invalid Layer
+ Chybná vrstva
+
+
+ SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Nemohu získat dialog výběru SpatiaLite od poskytovatele.
- Delimited Text
+ Oddělený text
+
+
+ Cannot get Delimited Text select dialog from provider.
+ Nemohu získat dialog výběru Oddělený text od poskytovatele.
+
+
+ MSSQL
MSSQL
- Cannot get MS SQL select dialog from provider.
- Nemohu získat dialog výběru MS SQL od poskytovatele.
+ Cannot get MSSQL select dialog from provider.
+ Nemohu získat dialog výběru MSSQL od poskytovatele.
- Oracle
+ Oracle
+
+
+ Cannot get Oracle select dialog from provider.
+ Nemohu získat dialog výběru Oracle od poskytovatele.
+
+
+ WMS
WMS
- Cannot get WMS select dialog from provider.
Nemohu získat dialog výběru WMS od poskytovatele.
- WCS
+ WCS
+
+
+ Cannot get WCS select dialog from provider.
+ Nemohu získat dialog výběru WCS od poskytovatele.
+
+
+ WFS
WFS
- Cannot get WFS select dialog from provider.
Nemohu získat dialog výběru WFS od poskytovatele.
- Default failed to open: %1
Selhalo otevření výchozího: %1
- Default not found: %1
Výchozí nenalezen: %1
- Open Template Project
Otevřít šablonový projekt
- Auto-open Project
Automaticky otevřít projekt
- Failed to open: %1
Selhalo otevření: %1
- Not valid project file: %1
Není platný soubor projektu: %1
- Project failed to open: %1
Selhalo otevření projektu: %1
- Default template has been reopened: %1
Výchozí šablona byla znovuotevřena: %1
- File not found: %1
Soubor nenalezen: %1
- QGis files
- QGis soubory
+ Calculating...
+ Probíhá výpočet...
- Abort...
+ Zrušit...
+
+
+ Choose a QGIS project file to open
+ Otevřít vybraný soubor QGIS projektu
+
+
+ Loading project: %1
Načítám projekt: %1
- Unable to open project
+ Nelze otevřít projekt
+
+
+ Security warning
Bezpečnostní varování
- project macros have been disabled.
makra projektu byla zakázána.
- Enable macros
Povolit makra
- Project loaded
Projekt byl načten
- Choose a QGIS project file
+ Vyberte soubor QGIS projektu
+
+
+ Saved project to: %1
+ Projekt uložen do: %1
+
+
+ Unable to save project %1
+ Nemohu uložit projekt %1
+
+
+ Choose a file name to save the QGIS project file as
+ Vyberte název, pod kterým chcete uložit QGIS projekt
+
+
+ Unable to load %1
Nemohu načíst %1
- Choose a file name to save the map image as
+ Vyberte jméno souboru, do kterého se má uložit mapa jako obrázek
+
+
+ Saved map image to %1
+ Soubor obrázku uložen do %1
+
+
+ Default system font substituted.
-
- Labeling
+ Tvorba popisků
+
+
+ Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
-
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
- Klasifikace
+
Range
- Rozsah
+
Unique Values
-
File Name
- Jméno souboru
+
Value Map
-
Enumeration
- Výčet
+
Hidden
-
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
- Foto
+
Web View
-
Color
- Barva
+
Relation Reference
-
Date/Time
-
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
-
- The project file is not writable.
-
- DXF export completed
-
- DXF export failed
-
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
-
- Show more
-
- Labeling Options
Možnosti popisků
- Please select a vector layer first
Vyberte prosím nejdřív vektorovou vrstvu
- Reading raster
- Načítám rastr
+ Layer labeling settings
+ Nastavení popisků vrstvy
- Reading raster
+
+
+ Cannot write raster error code: %1
Nemohu zapsat rastr - kód chyby: %1
- No Features Selected
- Saving done
+ Uloženo
- Export to vector file has been completed
+ Export do vektorového souboru dokončen
+
+
+ Save error
+ Chyba ukládání
+
+
+ Export to vector file failed.
+Error: %1
+ Export do vektorového souboru selhal.
+Chyba: %1
+
+
+ No Layer Selected
+ Není vybraná žádná vrstva
+
+
+ To delete features, you must select a vector layer in the legend
+ Před vymazáním objektu je třeba vybrat vektorovou vrstvu v okně legendy
+
+
+ No Vector Layer Selected
+ Není zvolená žádná vrstva
+
+
+ Deleting features only works on vector layers
+ Mazání objektů lze použít pouze u vektorových vrstev
+
+
+ Provider does not support deletion
+ Nástroj pro správu dat nepodporuje mazání
+
+
+ Data provider does not support deleting features
+ Nástroj pro správu data nepodporuje mazání objektů
+
+
+ Layer not editable
+ Vrstva není editovatelná
+
+
+ The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
+ Aktuální vrstva není editovatelná. Vyberte 'Započít editaci' z lišty digitalizace.
+
+
+ No Features Selected
+
+
+ The current layer has not selected features
-
+
+ Delete features
+ Smazat prvky
- %n feature(s) deleted.
- number of features deleted
-
-
+ Delete %n feature(s)?
+ number of features to delete
+ Smazat %n prvek? Smazat %n prvky? Smazat %n prvků?
- Features deleted
+ Prvky smazány
+
+
+ Problem deleting features
+ Problém při mazání objektů
+
+
+ A problem occured during deletion of features
+ Při mazání objektů se vyskytnul problém
+
+
+ %n feature(s) deleted.
+ number of features deleted
+
+
+ Merging features...
+ Slučuji prvky...
+
+
+ Abort
+ Přerušit
+
+
+ Create unique print composer title
Vytvořit unikátní nadpis Tvůrce map
- (title generated if left empty)
(generovaný nadpis, pokud je ponechán prázdný)
- Composer title
Nadpis Tvůrce
- Title can not be empty!
Nadpis nemůže být prázdný!
- Title already exists!
Nadpis již existuje!
- Composer %1
+ Tvůrce mapy %1
+
+
+ copy
kopírovat
- No active layer
+ Žádná aktivní vrstva
+
+
+ No active layer found. Please select a layer in the layer list
+ Nenalezena žádná aktivní vrstva. Prosím vyberte vrstvu v seznamu vrstev
+
+
+ Active layer is not vector
+ Aktivní vrstva není vektorová
+
+
+ The merge features tool only works on vector layers. Please select a vector layer from the layer list
+ Nástroj sloučení prvků funguje pouze na vektorové vrstvy. Vyberte prosím vektorovou vrstvu ze seznamu vrstev
+
+
+ Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
+ Slučování prvků je možné pouze pro vrstvy v editačním módu. K použití nástroje slučování, jdete na Vrstva->Přepnout editaci
+
+
+ Not enough features selected
+ Nebyl vybrán dostatek prvků
+
+
+ The merge tool requires at least two selected features
+ Nástroj slučování vyžaduje alespoň dva vybrané prvky
+
+
+ Merged feature attributes
+ Sloučeny atributy prvku
+
+
+ Merge failed
+ Sloučení selhalo
+
+
+ An error occured during the merge operation
+ Během slučování došlo k chybě
+
+
+ Union operation canceled
+ Operace Sjednocení zrušena
+
+
+ The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
+ Operace sjednocení by vytvořila typ geometrie nekompatibilní s aktuální vrstvou a proto byla zrušena
+
+
+ Merged features
+ Sloučené prvky
+
+
+ No active vector layer
Žádná aktivní vektorová vrstva
- To select features, choose a vector layer in the legend
Pro výběr prvků zvolte vektorovou vrstvu v legendě
- Features cut
+ Prvky vyjmuty
+
+
+ Features pasted
+ Prvky vloženy
+
+
+ Paste features
-
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
- Vloženo
- New memory layer name
-
- Layer name
- Název vrstvy
+ Název vrstvy
- No features in clipboard.
- Ve schránce nejsou žádné prvky
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
- Nemohu vytvořit novou vrstvu
- Cannot create field %1 (%2,%3)
- Nemohu vytvořit pole %1 (%2,%3)
- Cannot copy style: %1
+ Nemohu zkopírovat styl: %1
+
+
+ Cannot parse style: %1:%2:%3
+ Nemohu parsovat styl: %1:%2:%3
+
+
+ Cannot read style: %1
+ Nemohu číst styl: %1
+
+
+ Start editing failed
+ Editace selhala
+
+
+ Provider cannot be opened for editing
+ Poskytovatel nemůže být otevřen pro editaci
+
+
+ Stop editing
+ Ukončit editaci
+
+
+ Do you want to save the changes to layer %1?
+ Chcete uložit změny do vrstrvy %1?
+
+
+ Problems during roll back
+ Problémy během při návratu zpět
+
+
+ Could not %1 changes to layer %2
Errors: %3
@@ -16423,765 +12888,340 @@ Errors: %3
Chyb: %3
- rollback
rollback
- cancel
storno
- Save
Uložit
- all
vše
- Rollback
Rollback
- Cancel
Storno
- Current edits
Aktuální změny
- %1 current changes for %2 layer(s)?
%1 aktuálních změn pro %2 vrstvy?
- copy
kopírovat
- Plugin layer
Vrstva zásuvného modulu
- Memory layer
Vrstva paměti
- Duplicate layer:
Duplikovat vrstvu:
- %1 (duplication resulted in invalid layer)
%1 (duplikace vyústila v neplatnou vrstvu)
- Set scale visibility for selected layers
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
-
- A network request timed out, any data received is likely incomplete.
-
-
- %1 (%2type unsupported)
- %1 (%2typ nepodporován)
-
-
- Couldn't load Python support library: %1
Nemohu načíst podpůrnou knihovnu Pythonu: %1
- Couldn't resolve python support library's instance() symbol.
Nemohu vyřešit instance() symbol podpůrné knihovny pythonu.
- Python support ENABLED :-)
podpora Pythonu ZAPNUTA :-)
- There is a new version of QGIS available
+ K dispozici je nová verze QGIS
+
+
+ You are running a development version of QGIS
+ Používáte vývojářskou verzi QGIS
+
+
+ You are running the current version of QGIS
+ Používáte aktuální verzi QGIS
+
+
+ Would you like more information?
+ Přejete si bližší informáce?
+
+
+ QGIS Version Information
+ Informace o verzi QGIS
+
+
+ QGIS - Changes since last release
QGIS - Změny od posledního vydání
- Unable to get current version information from server
+ Nelze získat informace ze serveru o aktuální verzi
+
+
+ Connection refused - server may be down
+ Spojení zamítnuto - server je zřejmě vypnutý
+
+
+ QGIS server was not found
+ Nebyl nalezen QGIS server
+
+
+ Unknown network socket error: %1
Neznámá chyba síťového socketu: %1
- Unable to communicate with QGIS Version server
+%1
+ Nemohu komunikovat se serverem verzí QGISu
+%1
+
+
+ To perform a full histogram stretch, you need to have a raster layer selected.
+ Pro provedení celkového roztažení histogramu musíte nejdříve vybrat rastrovou vrstvu.
+
+
+ To change brightness or contrast, you need to have a raster layer selected.
Pro změnu jasu nebo kontrastu musíte mít vybranou rastrovou vrstvu.
- en
documentation language
en
- http://qgis.org/de/site/forusers/commercial_support.html
- http://qgis.org/de/site/forusers/commercial_support.html
+ Layer is not valid
+ Vrstva není platná
- The layer %1 is not a valid layer and can not be added to the map
+ Vrstva %1 není platná vrstva a nemůže být přidána do mapy
+
+
+ The layer is not a valid layer and can not be added to the map
+ Vrstva není platnou vrstvou a nemůže být přidána do mapy
+
+
+ Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Projekt má vrstvu/vrstvy v režimu editace s neuloženými změnami, které NEBUDOU uloženy!
- Do you want to save the current project?%1
- Přejete si uložit aktuální projekt?%1
+ Save?
+ Uložit?
- Current CRS: %1 (OTFR enabled)
Aktuální SRS: %1 (OTFR zapnuto)
- Current CRS: %1 (OTFR disabled)
Aktuální SRS: %1 (OTFR vypnuto)
- Map coordinates for the current view extents
+ Mapové souřadnice aktuální hranice pohledu
+
+
+ Map coordinates at mouse cursor position
+ Souřadnice mapy v místě kurzoru
+
+
+ Extents:
Rozsahy:
- Maptips require an active layer
+ Mapové tipy vyžadují aktivní vrstvu
+
+
+ %n feature(s) selected on layer %1.
+ number of selected features
+ %n prvek vybrán ve vrstvě %1. %n prvky vybrány ve vrstvě %1. %n prvků vybráno ve vrstvě %1.
+
+ Open a GDAL Supported Raster Data Source
+ Otevřít rastrový datový zdroj podporovaný knihovnou GDAL
+
+
+ Error adding valid layer to map canvas
Chyba při přidávání platné vrstvy do mapového okna
- Raster layer
Rastrová vrstva
- %1 is not a supported raster data source
+ %1 není podporovaný zdroj rastrových dat
+
+
+ Unsupported Data Source
+ Nepodporovaný datový zdroj
+
+
+ Exit QGIS
+ Ukončit QGIS
+
+
+ Do you really want to quit QGIS?
- Opravdu chcete ukončit QGIS?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- Project file is older
- Soubor projektu je starší
+ <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
+ <p>Tento soubor projektu byl uložen ve starší verzi QGISu. Při ukládání ho QGIS aktualizuje na nejnovější verzi, což může způsobit jeho nepoužitelnost ve starší verzi QGISu.<p>Přestože se vývojáři QGISu snaží zajistit zpětnou kompatibilitu, některé informace ze starého projektu mohou být ztraceny. V zájmu zlepšování kvality QGISu bychom ocenili, abyste případnou chybu hlásili na %3. Ujistěte se, že jste přiložili starý soubor projektu a uveďte vámi používanou verzi QGISu, abychom mohli chybu objevit a odstranit.<p>K odstranění tohoto varování při otvírání projektu starší verze, zrušte zaškrtnutí políčka '%5' v menu %4.<p>Verze souboru projektu: %1<br>Aktuální verze QGISu: %2
- This project file was saved by an older version of QGIS
- Tento soubor projektu byl uložen starší verzí QGISu
-
-
- This layer doesn't have a properties dialog.
- Tato vrstva nemá dialog valstností.
-
-
- Authentication required
- Požadováno ověření
-
-
- Proxy authentication required
- Požadováno ověření proxy
-
-
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Nastavení:Volby:Obecné</tt>
- Warn me when opening a project file saved with an older version of QGIS
Varuj mě při ukládání otevřeného projektu ve starší verzi QGISu
- Toggle fullscreen mode
- Přepnout režim celé obrazovky
+ Project file is older
+ Soubor projektu je starší
- Resource Location Error
- Chyba zdrojové lokace
+ This project file was saved by an older version of QGIS
+ Tento soubor projektu byl uložen starší verzí QGISu
- Error reading icon resources from:
- %1
- Quitting...
- Chyba při čtení ikony z:
- %1
-Ukončení...
+ Please check the <a href="#messageLog">message log</a> for further info.
+
- Overview
- Náhled
+ A network request timed out, any data received is likely incomplete.
+
- You are using QGIS version %1 built against code revision %2.
- Používáte QGIS verze %1 vytvořenou před revizí kódu %2.
+ Warning
+ Upozornění
-
-This binary was compiled against Qt %1,and is currently running against Qt %2
-
-Tento binární soubor byl zkompilován předt Qt %1, a aktuálně běží před Qt %2
+ This layer doesn't have a properties dialog.
+ Tato vrstva nemá dialog valstností.
- Stop map rendering
- Zastavit vykreslování mapy
+ Authentication required
+ Požadováno ověření
- Multiple Instances of QgisApp
- Násobné instance QgisApp
+ Proxy authentication required
+ Požadováno ověření proxy
- Multiple instances of Quantum GIS application object detected.
-Please contact the developers.
-
- Byly zjištěny násobné instance aplikace Quantum GIS.
-Prosím kontaktujte vývojáře.
-
+ SSL errors occured accessing URL %1:
+ Došlo k chybám SSLběhem přistupování k URL %1:
- Shift+Ctrl+S
- Save Project under a new name
- Shift+Ctrl+S
-
-
- &Undo
- &Zpět
-
-
- Undo the last operation
- Zpět posledni operaci
-
-
- Cu&t
- Vyjmou&t
-
-
- Quantum GIS
- Quantum GIS
-
-
- &New Print Composer
- &Nový tvůrce mapy
-
-
- Ctrl+P
- New Print Composer
- Ctrl+P
-
-
- New Print Composer
- Nový tvůrce mapy
-
-
- Composer manager...
- Správce tvorby map...
-
-
- Composer manager
- Správce tvorby map
-
-
- Ctrl+X
- Ctrl+X
-
-
- Cut the current selection's contents to the clipboard
- Vyjmout vybraný obsah do schránky
-
-
- &Copy
- &Kopírovat
-
-
- Ctrl+C
- Crtl+C
-
-
- Copy the current selection's contents to the clipboard
- Kopírovat vybraný obsah do schránky
-
-
- &Paste
- &Vložit
-
-
- Ctrl+V
- Ctrl+V
-
-
- Paste the clipboard's contents into the current selection
- Vložit obsah schránky do nynějšího výběru
-
-
- &Redo
- &Znovu
-
-
- Ctrl+Shift+Z
- Ctrl+Shift+Z
-
-
- Redo the last operation
- Zopakovat poslední operaci
-
-
- Ctrl+.
- Capture Points
- Ctrl+.
-
-
- Ctrl+/
- Capture Lines
- Ctrl+/
-
-
- Ctrl+Shift+/
- Capture Polygons
- Ctrl+Shift+/
-
-
- Move Feature(s)
- Přesunout prvek/prvky
-
-
- Add Part
- Přidat část
-
-
- Add part to multipolygon
- Přidat část k vícedílnému polygonu
-
-
- Click a vertex of the ring to delete
- Klikněte na vertex kruhu pro smazání
-
-
- Click a vertex of the part to delete
- Klikněte na vertex části pro smazání
-
-
- Merge selected features
- Sloučit vybrané prvky
-
-
- Merge attributes of selected features
- Sloučit atributy vybraných prvků
-
-
- Node Tool
- Nástroj uzlů
-
-
- Snapping Options...
- Možnosti přichytávání...
-
-
- Manage the background snapping options
- Spravovat možnosti přichytávání k pozadí
-
-
- Select features by rectangle
- Vybrat prvky obdélníkem
-
-
- Select features by polygon
- Vybrat prvky polygonem
-
-
- Select features by freehand
- Vybrat prvky od ruky
-
-
- Select features by radius
- Vybrat prvky poloměrem
-
-
- Zoom to Selection
- Zvětšit podle výběru
-
-
- Ctrl+J
- Zoom to Selection
- Ctrl+J
-
-
- Zoom Actual Size
- Zvětšit aktuální velikost
-
-
- Zoom to Actual Size
- Zvětšit na aktuální velikost
-
-
- Text Annotation
- Textová anotace
-
-
- Form annotation
- Formulářová anotace
-
-
- Move Annotation
- Přesunout anotaci
-
-
- Labeling
- Tvorba popisků
-
-
- New Shapefile Layer...
- Nová Shapefile vrstva...
-
-
- Ctrl+Shift+N
- Create a New Shapefile layer
- Ctrl+Shift+N
-
-
- Create a New Shapefile layer
- Vytvořit novou Shapefile vrstvu
-
-
- New SpatiaLite Layer ...
- Nová vrstva SpatiaLite ...
-
-
- Ctrl+Shift+A
- Create a New SpatiaLite Layer
- Ctrl+Shift+A
-
-
- Create a New SpatiaLite Layer
- Vytvořit novou SpatiaLite vrstvu
-
-
- Raster calculator ...
- Rastrový kalkulátor ...
-
-
- Add Vector Layer...
- Přidat vektorovou vrstvu...
-
-
- Add Raster Layer...
- Přidat rastrovou vrstvu...
-
-
- Add PostGIS Layer...
- Přidat vrstvu PostGIS...
-
-
- Add a Web Mapping Server Layer
- Přidat Web Mapping Server vrstvu
-
-
- Open Attribute Table
- Otevřít atributovou tabulku
-
-
- Remove Layer(s)
- Odstranit vrstvu(y)
-
-
- Ctrl+D
- Remove Layer(s)
- Ctrl+D
-
-
- Ctrl+Shift+C
- Set CRS of Layer(s)
- Ctrl+Shift+C
-
-
- Live GPS tracking
- Živé GPS sledování
-
-
- Show GPS tool
- Zobrazit nástroj GPS
-
-
- Properties...
- Možnosti...
-
-
- Set properties of the current layer
- Nastavit možnosti aktuální vrstvy
-
-
- Query...
- Dotaz...
-
-
- Set subset query of the current layer
- Nastavit podmnožinový dotaz pro aktuální vrstvu
-
-
- Add to Overview
- Přidat do náhledu
-
-
- Ctrl+Shift+O
- Add current layer to overview map
- Ctrl+Shift+O
-
-
- Add All to Overview
- Přidat vše do náhledu
-
-
- Ctrl+Shift+U
- Show all layers
- Ctrl+Shift+U
-
-
- Ctrl+Shift+H
- Hide all layers
- Ctrl+Shift+H
-
-
- Manage Plugins...
- Spravovat zásuvné moduly...
-
-
- Toggle Full Screen Mode
- Přepnout režim celé obrazovky
-
-
- Ctrl+F
- Toggle fullscreen mode
- Ctrl+F
-
-
- Ctrl+Shift+P
- Set project properties
- Ctrl+Shift+P
-
-
- Custom CRS...
- Uživatelský SRS...
-
-
- Manage custom coordinate reference systems
- Spravovat vlastní souřadnicové referenční systémy
-
-
- Minimize
- Minimalizovat
-
-
- Ctrl+M
- Minimize Window
- Ctrl+M
-
-
- Minimizes the active window to the dock
- Minimalizovat aktivní okno na ....(lištu?)
-
-
- Zoom
- Zvětšit
-
-
- Toggles between a predefined size and the window size set by the user
- Přepíná mezi předdefinovanou velikostí a velikostí okna nastavenou uživatelem
-
-
- Bring All to Front
- Přesunout vše do popředí
-
-
- Bring forward all open windows
- Přesunout všechna okna do pozadí
-
-
- Move Label
- Přesunout popisek
-
-
- Move labels interactively
- Přesunout popisky interaktivně
-
-
- Rotate Label
- Rotovat popisek
-
-
- Rotate labels interactively
- Rotovat popisky interaktivně
-
-
- Change label
- Změnit popisek
-
-
- Change label properties
- Změnit možnosti popisku
-
-
- Style manager...
- Správce stylů...
-
-
- Show style manager V2
- Zobrazit správce stylů V2
-
-
- Print Composers
- Tvorba map
-
-
- &Edit
- &Editovat
-
-
- Panels
- Panely
-
-
- Toolbars
- Nástrojové lišty
-
-
- Select
- Vybrat
-
-
- Measure
- Měřit
-
-
- New
- Nový
-
-
- &Window
- &Okno
-
-
- &Database
- &Databáze
-
-
- Label
- Popisek
-
-
- Toggle extents and mouse position display
- Přepnout rozšíření a zobrazení pozice myši
-
-
- Coordinate:
- Souřadnice:
-
-
- Current map coordinate
- Aktuální souřadnice na mapě
-
-
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position.
- Zobrazí souřadnice na mapě pro aktuální pozici kurzoru. Zobrazení se průběžně aktualizuje při pohybu kurzoru. Také dovoluje nastavit střed mapy na zadanou pozici.
-
-
- Current map coordinate (formatted as x,y)
- Aktuální souřadnice na mapě (ve formátu x,y)
-
-
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
- Tato ikona ukazuje, zda je nebo není možná transformace souřadnicového referenčního systému "on the fly". Kliknutím na ikonu získáte dialog vlastností projektu ke změně tohoto chování.
-
-
- CRS status - Click to open coordinate reference system dialog
- CRS status - klikněte k otevření dialogu souřadnicového referenčního systému
-
-
- Private qgis.db
- Soukromý qgis.db
-
-
- Could not open qgis.db
- Nemohu otevřít qgis.db
-
-
- Migration of private qgis.db failed.
-%1
- Migrace soukromého qgis.db se nezdařila.
-%1
-
-
- Current CRS: %1
- Aktuální SRS: %1
-
-
- Inactive project CRS: %1
- Neaktivní SRS projektu: %1
-
-
-
Always ignore these errors?
@@ -17190,1244 +13230,14 @@ Always ignore these errors?
Vždy ignorovat tyto chyby?
- %n SSL errors occured
number of errors
-
- Vyskytla se %n chyba SSL
- Vyskytly se %n chyby SSL
- Vyskytlo se %n chyb SSL
-
-
-
-
-This copy of QGIS has been built with GDAL/OGR %1.
-
-Tato kopie QGISu byla vytvořena s GDAL/OGR %1.
-
-
-
-This copy of QGIS has been built with PostgreSQL support (%1).
-
-Tato kopie QGISu byla vytvořena s podporou PostgreSQL (%1).
-
-
-
-This copy of QGIS has been built with SpatiaLite support (%1).
-
-Tato kopie QGISu byla vytvořena s podporou SpatiaLite (%1).
-
-
-
-This copy of QGIS has been built with QWT %1.
-
-Tato kopie QGISu byla vytvořena s podporou QWT %1.
-
-
- What's new in Version 1.6.0 'Capiapó'?
- Co je nového ve verzi 1.6.0 'Capiapó'?
-
-
- Please note that this is a release in our 'cutting edge' release series. As such it contains new features and extends the programmatic interface over QGIS 1.0.x and QGIS 1.5.0. We recommend that you use this version over previous releases.
- Berte prosím v potaz, že toto je vydání naší série "horkých novinek". Jako taková obsahuje nové vlastnosti a rozšiřuje programátorské rozhraní přes QGIS 1.0.x a QGIS 1.5.0. Doporučujeme použít tuto verzi místo předchozích vydání.
-
-
- This release includes over 177 bug fixes and many new features and enhancements. Once again it is impossible to document everything here that has changed so we will just provide a bullet list of key new features here.
- toto vydání zahrnuje přes 177 oprav chyb a mnoho nových funkcí a vylepšení. Opět není možné zdokumentovat zde vše, proto zde uvedeme pouze stručný seznam klíčových nových vlastností.
-
-
- General Improvements
- Obecná vylepšení
-
-
- Added gpsd support to live gps tracking.
- Přidána podpora gpsd pro živé gps sledování.
-
-
- A new plugin has been included that allows for offline editing.
- Nový zásuvný modul, který umožňuje offline editaci.
-
-
- Field calculator will now insert NULL feature value in case of calculation error instead of stopping and reverting calculation for all features.
- Kalkulátor polí vloží nyní NULL hodnotu prvku v případě chyby výpočtu místo zastavení a stornování celého výpočtu pro všechny prvky.
-
-
- Update srs.db to include grid reference.
- Aktualizována srs.db aby zahrnovala reference gridu.
-
-
- Added a native (C++) raster calculator implementation which can deal with large rasters efficiently.
- Přidána nativní (C++) implementace rastrového kalkulátoru který je schopen efektivně pracovat i s velkými rastry.
-
-
- Improved interaction with extents widget in statusbar so that the text contents of the widget can be copied and pasted.
- Zlepšena interakce s widgetem rozsahů ve stavové liště, takže textový obsah widgetu může být zkopírován a vložen.
-
-
- Many improvements and new operators to the field calculator including field concatenation, row counter etc.
- Mnoho vylepšení a nové operace v Kalkulátoru polí zahrnující řetězení polí, počítadlo řádků atd.
-
-
- Added --configpath option that overrides the default path (~/.qgis) for user configuration and forces QSettings to use this directory, too. This allows users to e.g. carry QGIS installation on a flash drive together with all plugins and settings.
- Přidána možnost --configpath která přepíše výchozí cestu (~/.qgis) pro uživatelské nastavení a donutí QSettings také použít tuto složku. To uživatelům dovolí např. přenášet instalaci QGISu na flash disku spolu se všemi nastaveními a zásuvnými moduly.
-
-
- Experimental WFS-T support. Additionally ported wfs to network manager.
- Experimentální podpora WFS-T. Dodatečně portován wfs do správce sítí.
-
-
- Georeferencer has had many tidy ups and improvements.
- Georeferencer absolvoval úklid kódu a mnoho vylepšení.
-
-
- Support for long int in attribute dialog and editor.
- Podpora pro long int v atributovém dialogu a editoru.
-
-
- The QGIS Mapserver project has been incorporated into the main SVN repository and packages are being made available. QGIS Mapserver allows you to serve your QGIS project files via the OGC WMS protocol.
- Projekt QGIS Mapserver byl zahrnut do hlavního SVN repozitáře a balíčky se začínají dávat k dispozici. QGIS Mapserver vám umožňuje poskytovat soubory vašeho QGIS projektu přes OGC WMS protokol.
-
-
- Read More.
- Čtěte více.
-
-
- Select and measure toolbar flyouts and submenus.
- Nástrojový panel výběru a měření a jejich podmenu.
-
-
- Support has been added for non-spatial tables (currently OGR, delimited text and PostgreSQL providers). These tables can be used for field lookups or just generally browsed and edited using the table view.
- Byla přidána podpora pro neprostorové tabulky (aktuálně OGR, oddělený text a PostgreSQL poskytovatelé). Tyto tabulky mohou být použity pro prohledávání polí nebo obecně prohlíženy a editovány v rámci tabulkového zobrazení.
-
-
- Added search string support for feature ids ($id) and various other search related improvements.
- Přidána podpora vyhledávacích řetězců pro id prvků ($id) a další rozličná vylepšení vyhledávání.
-
-
- Added reload method to map layers and provider interface. Like this, caching providers (currently WMS and WFS) can synchronize with changes in the datasource.
- Přidána možnost znovunačtení k mapovým vrstvám a rozhraní poskytovatele. Takto mohou kešující poskytovatelé (aktuálně WMS a WFS) synchronizovat se změnami v datovém zdroji.
-
-
- Table of contents (TOC) improvements
- Vylepšení panelu Vrstvy
-
-
- Added a new option to the raster legend menu that will stretch the current layer using the min and max pixel values of the current extent.
- Přidána nová možnost do menu legendy rastru, která roztáhne aktuální vrstvu za použití min a max hodnot pixelů v aktuálním rozsahu.
-
-
- When writing vector files using the table of contents context menu's 'Save as' option, you can now specify OGR creation options.
- Při zapisování vektorových souborů za použití kontext menu v okně Vrstvy, můžete nyní zadat možnosti pro zápise pomocí OGR.
-
-
- In the table of contents, it is now possible to select and remove or move several layers at once.
- V okně vrstvy je nyní možné vybrat a odstranit nebo posunout více vrstev najednou.
-
-
- Labelling (New generation only)
- Popisky (pouze u nové symbologie)
-
-
- Data defined label position.
- Daty definovaná pozice popisku.
-
-
- Line wrapping, data defined font and buffer settings.
- Zalamování linie, daty definovaný font a nastavení bufferu.
-
-
- Layer properties and symbology
- Vlastnosti vrstvy a symbologie
-
-
- Three new classification modes added to graduated symbol renderer (version 2), including Natural Breaks (Jenks), Standard Deviations, and Pretty Breaks (based on pretty from the R statistical environment).
- Přidány tři nové režimy klasifikace do vykreslovače odstupňovaného symbolu (verze 2) zahrnující Natural Breaks (Jenks), Směrodatné odchylky, a Pretty Breaks (založené na pretty ze statistického prostředí R).
-
-
- Improved loading speed of the symbol properties dialog.
- Vylepšena rychlost načítání dialogu vlastností symbolu.
-
-
- Data-defined rotation and size for categorized and graduated renderer (symbology-ng).
- Daty definovaná rotace a velikost pro kategorizované a odstuňované vykreslovače (nová symbologie).
-
-
- Use size scale also for line symbols to modify line width.
- Lze využít měřítko pro liniové symboly k upravení šířky linií.
-
-
- Replaced raster histogram implementation with one based on Qwt. Added option to save histogram as image file. Show actual pixel values on x axis of raster histogram.
- Nahrazen histogram rastru variantou založenou na Qwt. Přidána možnost uložit histogram jako obrázek. Zobrazuje hodnoty aktuálního pixelu na ose x rastrového histgramu.
-
-
- Added ability to interactively select pixels from the canvas to populate the transparency table in the raster layer properties dialog.
- Přidána schopnost interaktivně vybírat pixely z mapového okna pro zaplnění tabulky průhlednosti v dialogu vlastností rastru.
-
-
- Allow creation of color ramps in vector color ramp combo box.
- Možné vytvořit barevné rozsahy v dialogu barevných rozsahů.
-
-
- Added 'style manager...' button to symbol selector so that users will find the style manager more easily.
- Přidáno tlačítko "správce stylů..." k výběru symbolu, takže uživatelé najdou Správce snadněji.
-
-
- Map Composer
- Tvůrce mapy
-
-
- add capability to show and manipulate composer item width/ height in item position dialog.
- přidána schopnost zobrazit a pracovat v Tvůrci mapy se šířkou/výškou položky v dialogu pozice položky.
-
-
- Composer items can now be deleted with the backspace key.
- Položky tvůrce mapy mohou být smazány klávesou backspace.
-
-
- Sorting for composer attribute table (several columns and ascending / descending).
- Řazení atributové tabulky v Tvůrci map (několik sloupců, vzestupně / sestupně).
-
-
- Select raster layers to add...
- Vyberte rastrové vrstvy pro přidání...
-
-
- Raster
- Rastr
-
-
-
-GDAL/OGR Version: %1.
-
-GDAL/OGR Verze: %1.
-
-
-
-PostgreSQL Client Version: %1.
-
-PostgreSQL klient verze: %1.
-
-
-
-No PostgreSQL support.
-
-Žádná podpora PostgreSQL.
-
-
-
-SpatiaLite Version: %1.
-
-SpatiaLite verze: %1.
-
-
-
-No SpatiaLite support.
-
-Žádná podpora SpatiaLite.
-
-
-
-QWT Version: %1.
-
-QWT verze: %1.
-
-
- What's new in Version 1.7.0 'Wrocław'?
- Co je nového ve verzi 1.7.0 'Wrocław'?
-
-
- This release is named after the town of Wrocław in Poland. The Department of Climatology and Atmosphere Protection, University of Wrocław kindly hosted our last developer meeting in November 2010. Please note that this is a release in our 'cutting edge' release series. As such it contains new features and extends the programmatic interface over QGIS 1.0.x and QGIS 1.6.0. As with any software, there may be bugs and issues that we were not able to fix in time for the release. We therefore recommend that you test this version before rolling it out en-masse to your users.
- Tato verze je pojmenovaná po městě Wrocław v Polsku. Oddělení klimatologie a ochrany ovzduší, Wrocławské univerzity byla velmi laskavá a hostila naše poslední setkání vývojářů v listopadu 2010. Vezměte prosím na vědomí, že se jedná o verzi v naší sérii "posledních novinek". Jako taková obsahuje nové funkce a rozšiřuje programové rozhraní od QGIS 1.0.x přes QGIS 1.6.0. Stejně jako u jiných software, může tu být chyby a problémy, které jsme nebyli schopni opravit včas pro vydání. Doporučujeme proto, abyste tuto verzi otestovali před jejiím masovým nasazením u vašich uživatelů.
-
-
- This release includes over 277 bug fixes and many new features and enhancements. Once again it is impossible to document everything here that has changed so we will just provide a bullet list of key new features here.
- Toto vydání zahrnuje přes 177 oprav chyb a mnoho nových funkcí a vylepšení. Opět není možné zdokumentovat zde vše, proto zde uvedeme pouze stručný seznam klíčových nových vlastností.
-
-
- Symbology labels and diagrams
- Popisky symbologie a diagramy
-
-
- New symbology now used by default!
- Nová symbologie nyní použita jako výchozí!
-
-
- Diagram system that uses the same smart placement system as labeling-ng
- Systém diagramů používá stejný chytrý systém umístění jako systém popisků ( labeling-ng)
-
-
- Export and import of styles (symbology-ng).
- Export a import of stylů (symbology-ng).
-
-
- Labels for rules in rule-based renderers.
- Popisky pro pravidla v pravidly definovaných vykreslovačích.
-
-
- Ability to set label distance in map units.
- Schopnost nastavit vzdálenost popisku v jednotkách mapy.
-
-
- Rotation for svg fills.
- Rotace pro svg výplně.
-
-
- Font marker can have an X,Y offset.
- Textové značky mohou mít X,Y odsazení.
-
-
- Allow the line symbol layers to be used for outline of polygon (fill) symbols.
- Povoleno použití vrstev liniových symbolů pro použití jako obrys polygonových (výplňových) symbolů.
-
-
- Option to put marker on the central point of a line.
- Možnost umístit značku na centrální bod linie.
-
-
- Option to put marker only on first/last vertex of a line.
- Možnost umístit značku pouze na první/poslední vertex linie.
-
-
- Added "centroid fill" symbol layer which draws a marker on polygon's centroid.
- Přidána symbolová vrstva "centroidové výplně", která vykreslí značku na centroidu polygonu.
-
-
- Allow the marker line symbol layer to draw markers on each vertex.
- Povoleno u liniové symbolové vrstvy značek vykreslit značky na každém vertexu.
-
-
- Move/rotate/change label edit tools to interactively change data defined label properties.
- Nástroje úpravy popisku Posunout/rotovat/změnit pro interaktivní změnu daty definovaných vlastností.
-
-
- New Tools
- Nové nástroje
-
-
- Added GUI for gdaldem.
- Přidáno grafické rozhraní pro gdaldem.
-
-
- Added 'Lines to polygons' tool to vector menu.
- Do menu Vektor přidán nástroj "Linie na polygony".
-
-
- Added field calculator with functions like $x, $y and $perimeter.
- Přidán kalkulátor polí s funkcemi jako $x, $y a $obvod.
-
-
- Added voronoi polygon tool to Vector menu.
- Do menu Vektor přidán nástroj pro Voronoi polygony.
-
-
- User interface updates
- Aktualizace uživatelského rozhraní
-
-
- Allow managing missing layers in a list.
- Povolena správa chybějících vrstev v seznamu.
-
-
- Zoom to group of layers.
- Přiblížení na skupinu vrstve.
-
-
- 'Tip of the day' on startup. You can en/disable tips in the options panel.
- 'Tip dne' při startu. Můžete je zapnout/vypnout v panelu možností.
-
-
- Better organisation of menus, separate database menu added.
- Lepší organizace menu, přidáno oddělené okno databáze.
-
-
- Add ability to show number of features in legend classes. Accessible via right-click legend menu.
- Přidána schopnost zobrazení počtu prvků v třídách legendy. Dostupné přes pravý klik na menu legendy.
-
-
- General clean-ups and usability improvements.
- Obecné vyčištění kódu a vylepšení použitelnosti.
-
-
- CRS Handling
- Správa SRS
-
-
- Show active crs in status bar.
- Zobrazit aktivní SRS ve stavové liště.
-
-
- Assign layer CRS to project (in the legend context menu).
- Přiřadit SRS vrstvy projektu (v kontext menu legendy).
-
-
- Select default CRS for new projects.
- Vybrat výchozí SRS pro nové projekty.
-
-
- Allow setting CRS for multiple layers at once.
- Povoleno nastavení SRS pro více vrstve najednou.
-
-
- Default to last selection when prompting for CRS.
- Při dotazu na SRS jako výchozí nabídnout poslední výběr.
-
-
- Rasters
- Rastry
-
-
- Added AND and OR operator for raster calculator
- Do rastrového kalkulátoru přidán operátor AND a OR
-
-
- On-the-fly reprojection of rasters added!
- On-the-fly reprojekce rastrů přidána!
-
-
- Proper implementation of raster providers.
- Korektní implementace poskytovatelů rastrů.
-
-
- Added raster toolbar with histogram stretch functions.
- Přidán panel rastrů s funkcemi roztažení histogramu.
-
-
- Providers and Data Handling
- Poskytovatelů a práce s daty
-
-
- New SQLAnywhere vector provider.
- Nový vektorový poskytovatel SQLKdekoliv (SQLAnywhere).
-
-
- Table join support.
- Podpora připojení tabulky.
-
-
- Feature form updates
- Aktualizace formulářů prvků
-
-
- Make NULL value string representation configurable.
- Reprezentace řetězců hodnot NULL je nastavitelná.
-
-
- Fix feature updates in feature form from attribute table.
- Opraveny aktualizace formuláře prvků z atributové tabulky.
-
-
- Add support for NULL values in value maps (comboboxes).
- Přidána podpora pro NULL hodnoty v mapách hodnot (combo boxy).
-
-
- Use layer names instead of ids in drop down list when loading value maps from layers.
- Použity názvy vrstev místo ID v rozbalovacím seznamu při načítání map hodnot z vrstev.
-
-
- Support feature form expression fields: line edits on the form which name prefix "expr_" are evaluated. Their value is interpreted as field calculator string and replaced with the calculated value.
- Přidána podpora pro pole vyjádření formuláře: úpravy linií ve formě jejíž předpony názvu "expr_" jsou vyhodnoceny. Jejich hodnota je interpretována jako řetězec kalkulátoru polí a nahrazena vypočtenou hodnotou.
-
-
- Support searching for NULL in attribute table.
- Podpora hledání NULL hodnot v atributové tabulce.
-
-
- Attribute editing improvements
- Vylepšení úpravy atributů
-
-
- Improved interactive attribute editing in table (adding/deleting features, attribute update).
- Vylepšeny interaktivní úpravy atributů v tabulce (přidávání/mazání prvků, aktualizace atributů).
-
-
- Allow adding of geometryless features.
- Povoleno přidání prvků bez geometrie.
-
-
- Fixed attribute undo/redo.
- Opraveno Zpět/Znovu u atributů.
-
-
- Improved attribute handling.
- Vylepšena práce s atributy.
-
-
- Optionally re-use entered attribute values for next digitized feature.
- Volitelné znovupoužití zadaných hodnot atributů pro další digitalizované prvky.
-
-
- Allow merging/assigning attribute values to a set of features.
- Povoleno slučování/přiřazování atributových hodnot sadě prvků.
-
-
- Allow OGR 'save as' without attributes (for eg. DGN/DXF).
- Povoleno OGR 'uložit jako' bez atributů attributes (např. pro DGN/DXF).
-
-
- Api and Developer Centric
- Zaměření na API a vývojáře
-
-
- Refactored attribute dialog calls to QgsFeatureAttribute.
- Přepracováno volání atributového dialogu na QgsFeatureAttribute.
-
-
- Added QgsVectorLayer::featureAdded signal.
- Přidán QgsVectorLayer::featureAdded signal.
-
-
- Layer menu function added.
- Přidána funkce menu vrstvy.
-
-
- Added option to load c++ plugins from user specified directories. Requires application restart to activate.
- Přidána možnost načíst c++ zásuvné moduly z uživatelem zadaných složek. Vyžaduje restart programu pro aktivaci.
-
-
- Completely new geometry checking tool for fTools. Significantly faster, more relevant error messages, and now supports zooming to errors. See the new QgsGeometry.validateGeometry function
- Zcela nový nástroj kontroly geometrie v fTools. Významně rychlejší, mnohem podstatnější chybové zprávy a nyní podpora přiblížení na chyby. Podívejte se na novou funkci QgsGeometry.validateGeometry
-
-
- QGIS Mapserver
- QGIS Mapserver
-
-
- Ability to specify wms service capabilities in the properties section of the project file (instead of wms_metadata.xml file).
- Schopnost definovat schopnosti wms služby v sekci vlastností souboru projektu (místo wms_metadata.xml souboru).
-
-
- Support for wms printing with GetPrint-Request.
- Podpora wms tisku s GetPrint-Request.
-
-
- Support for icons of plugins in the plugin manager dialog.
- Podpora pro ikony zásuvných modulů v dialogu správy zásuvných modulů.
-
-
- Removed quickprint plugin - use easyprint plugin rather from plugin repo.
- Odstraněn zásuvný modul quickprint - použijte raději modul easyprint z repozitáře.
-
-
- Removed ogr converter plugin - use 'save as' context menu rather.
- Odstraněn ogr converter plugin - použijte místo toho kontext menu 'uložit jako'.
-
-
- Printing
- Tisk
-
-
- Undo/Redo support for the print composer
- Zpět/znovu podpora v Tvůrci map
-
-
- Select vector layers to add...
- Vyberte vektorové vrstvy pro přidání...
-
-
- Oracle
- Oracle
-
-
- Cannot get Oracle select dialog from provider.
- Nemohu získat dialog výběru Oracle od poskytovatele.
-
-
- Calculating...
- Probíhá výpočet...
-
-
- Abort...
- Zrušit...
-
-
- Choose a file name to save the QGIS project file as
- Vyberte název, pod kterým chcete uložit QGIS projekt
-
-
- Choose a file name to save the map image as
- Vyberte jméno souboru, do kterého se má uložit mapa jako obrázek
-
-
- Saving done
- Uloženo
-
-
- Export to vector file has been completed
- Export do vektorového souboru dokončen
-
-
- Save error
- Chyba ukládání
-
-
- Export to vector file failed.
-Error: %1
- Export do vektorového souboru selhal.
-Chyba: %1
-
-
- Merged feature attributes
- Sloučeny atributy prvku
-
-
- Start editing failed
- Editace selhala
-
-
- Provider cannot be opened for editing
- Poskytovatel nemůže být otevřen pro editaci
-
-
- Stop editing
- Ukončit editaci
-
-
- Do you want to save the changes to layer %1?
- Chcete uložit změny do vrstrvy %1?
-
-
- Problems during roll back
- Problémy během při návratu zpět
-
-
- Tile scale
- Měřítko dlaždice
-
-
- Python Console
- Python konzole
-
-
- The layer %1 is not a valid layer and can not be added to the map
- Vrstva %1 není platná vrstva a nemůže být přidána do mapy
-
-
- Map coordinates for the current view extents
- Mapové souřadnice aktuální hranice pohledu
-
-
- Maptips require an active layer
- Mapové tipy vyžadují aktivní vrstvu
-
-
- %n feature(s) selected on layer %1.
- number of selected features
-
- %n prvek vybrán ve vrstvě %1.
- %n prvky vybrány ve vrstvě %1.
- %n prvků vybráno ve vrstvě %1.
-
-
-
- SSL errors occured accessing URL %1:
- Došlo k chybám SSLběhem přistupování k URL %1:
-
-
-
-
-Ignore errors?
-
-
-Ignorovat chyby?
-
-
- SSL errors occured
- Vyskytly se chyby SSL
-
-
- Quantum GIS - %1 ('%2')
- Quantum GIS - %1 ('%2')
-
-
- Save edits
- Uložit změny
-
-
- Save as...
- Uložit jako...
-
-
- Save the current layer as a vector file
- Uložit aktuální vrstvu jako vektorový soubor
-
-
- Save Selection as vector file...
- Uložit výběr jako vektorový soubor...
-
-
- Save the selection as a vector file
- Uložit výběr jako vektorový soubor
-
-
- Tile scale slider
- Posuvník měřítka dlaždice
-
-
- Show tile scale slider
- Zobrazit posuvník měřítka dlaždic
-
-
- Whats new in Version 1.5.0 'Tethys'?
- Co je nového ve verzi 1.5.0 'Tethys'?
-
-
- Please note that this is a release in our 'cutting edge' release series. As such it contains new features and extends the programmatic interface over QGIS 1.0.x and QGIS 1.4.0. If an unchanging user interface, programmatic API and long term support is more important to you then cool new and untested features, we recommend that you use a copy of QGIS from our Long Term Support (LTS)1.0.x release series. In all other cases we recommend that you use this version.
- Berte prosím na vědomí, že tohle je vydání v naší sérii "horkých novinek". Jako takové obsahuje nové funkce a rozšiřuje programové rozhraní od QGISu 1.0.x a 1.4.0. Pokud je neměnné uživatelské prostředí, programové API a dlouhodobá podpora dpro vás důležitější než úžasné nové a netestované funkce, pak vám doporučujeme použít kopii QGISu z naší série dlouhodobě podporovaných (LTS) 1.0.x vydání. Ve všech ostatních případech vám doporučujeme použít tuto verzi.
-
-
- This release includes over 350 bug fixes, over 40 new features. Once again it is impossible to document everything here that has changed so we will just provide a bullet list of key new features here.
- Toto vydání zahrnuje víc jak 350 oprav chyb, přes 40 nových funkcí. Není možné popsat vše, co se změnilo, proto vám zde poskytneme pouze bodový seznam nových klíčových funkcí.
-
-
- Main GUI
- Hlavní uživatelské rozhraní (GUI)
-
-
- There is a new angle measuring tool that allows you to interactively measure angles against the map backdrop.
- Je zde nový nástroj měření úhlu, který umožňuje interaktivně měřit úhly oproti horizontu mapy.
-
-
- Live GPS Tracking tool
- Nástroj živého GPS sledování
-
-
- User configurable WMS search server
- Uživatelsky nastavitelné hledání WMS serverů
-
-
- Allow editing of invalid geometry in node tool
- Povoleny úpravy neplatné geometrie v nástroji uzlů
-
-
- Choice between mm and map units for new symbology. Scaling to use new symbology in print composer as well
- Výběr mezi milimetry a mapovými jednotkami pro novou symbologii. Taktéž škálování pro použití nové symbologie v tvůrci mapy
-
-
- SVG fill symbol layer for polygon textures
- Výplň SVG symbolem pro polygonové textury
-
-
- Font marker symbol layer
- Textové značky symbolových vrstev
-
-
- Added --noplugins command line options to avoid restoring the plugins. Useful when a plugin misbehaves and causes QGIS to crash during startup
- Přidány možnosti --noplugins pro příkazovou řádku k zabránění obnovení zásuvných modulů. To se hodí, když se zásuvný modul chová nekorektně a způsobuje padání QGISu během startu
-
-
- Allow hiding of deprecated CRSes
- Povoleno skrývání neschválených SRS
-
-
- Add point displacement renderer plugin - allows points to be shifted to avoid colliding with other points
- Přidán zásuvný modul vykreslovač posunu bodů - dovoluje posun bodů kvůli zabránění kolize s ostatními body
-
-
- Allow saving vector layers as ogr vector files
- Povoleno ukládání vektorových vrstev jako OGR vektorových vrstev
-
-
- Raster provider: reduce debugging noise
- Poskytovatel rastru: redukce ladícího šumu
-
-
- Allow adding parts to multi points and lines
- Povoleno přidávání částí do vícedílných bodů a čar
-
-
- Text and form annotation tools are now in gui and app
- Textové a formulářové anotace mají nyní GUI
-
-
- Added possibility to place a set of default composer templates in pkgDataPath/composer_templates
- Přidána možnost umístit sadu výchozích šablon tvorby map do pkgDataPath/composer_templates
-
-
- Gradient color ramps now support multiple stops - for adding intermediate colors
- Přechodové barevné rozsahy nyní podporují několik zarážek - pro přidání středních barev
-
-
- Center map if user clicks into the map
- Vycentrování mapy pokud uživatel klikne do mapy
-
-
- New plugin for carrying out spatial selections
- Nový zásuvný modul pro prostorové výběry
-
-
- Data-defined size and rotation for single symbol renderer in symbology-ng
- Daty definovaná velikost a rotace pro vykreslení jednotlivých symbolů v nové symbologii
-
-
- IdentifyAsHtml to raster layer and use it in identify
- IdentifyAsHtml pro rastrovou vrstvu a použití v identifikaci
-
-
- Export legend groups and layers with legendinterface and use this information to display groups in the composer legend.
- Export skupin legend a vrstev s legendinterface a použití této informace pro zobrazení skupin v legendě tvorby mapy.
-
-
- Show selected feature count in status bar
- Zobrazení počtu vybraných prvků ve stavové liště
-
-
- Query option added to layer menu to subset vector layers
- Do menu podmnožin vektorových vrstev přidána možnost dotazu
-
-
- Option to label only selected features (on the 'old' labelling tool)
- Možnost použít popisky pouze pro vybrané prvky (ve "starém" nástroji popisek)
-
-
- Load/save queries created in the query builder.
- Načíst/uložit dotazy vytvořené v tvorbě dotazů.
-
-
- Manual adding of categories in symbology-ng.
- Manuální přidání kategorií do symbology-ng.
-
-
- Georeferencer: possibility to configure if residuals should be showed in pixels or map units
- Georeferencování: možnost nastavení, zda zobrazovat rezidua v pixelech nebo mapových jednotkách
-
-
- Delimited text provider: allow empty values in numeric columns
- Oddělený text: povoleny prázdné hodnoty v číselných sloupcích
-
-
- Added rule-based renderer for symbology-ng
- Do symbology-ng přidán vykreslovač založený na pravidle
-
-
- Ability to create spatial lite databases from within QGIS
- Schopnost vytvořit spatial lite databáze přímo v QGISu
-
-
- Inclusion of GDAL Raster tools plugin into QGIS core
- Zahrnutí rastrových nástrojů GDAL do jádra QGISu
-
-
- New python console (with history)
- Nová konzole Pythonu (s historií)
-
-
- Add validation to capture tool
- Přidáno ověření k nástroji zachytávání
-
-
- Allow postgres layers without saved username & password by asking for credentials
- Povoleny postgres layers bez uloženého uživatelského jména & hesla díky dotazu na osobní údaje
-
-
- Support NULL values in search strings
- Podpora NULL hodnot ve vyhledávacích řetězcích
-
-
- Optionally add new layers to the selected group
- Volitelně lze přidat nové vrstvy do vybrané skupiny
-
-
- Map composer can add attribute tables in layouts. It is possibile to show only visible features in composer table or all features
- Tvůrce mapy umí přidat atributovou tabulku do návrhu mapy. V tabulce možné zobrazit pouze viditelné prvky nebo všechny
-
-
- Identify tool attribute form now non-modal in view mode (since r12796)
- Atributový formulář nástroje identifikace je nyní nemodální v režimu zobrazení (od r12796)
-
-
- Identified features' highlight disappear when window is deactivate or closed and reappears when reactivated.
- Zvýraznění identifikovaných prvků zmizí při deaktivaci nebo zavření okna a znovu se objeví po jeho reaktivaci.
-
-
- WMS and WMS-C Support
- Podpora WMS a WMS-C
-
-
- WMS-C support, new spatial authorities, wms selection improvements
- Podpora WMS-C, nové prostorové autority,vylepšení wms výběru
-
-
- Resolved EPSG dependency in spatial reference systems and included french IGNF definitions in srs.db
- Vyřešena závislost EPSG v prostorových referenčních systémech a byly zahrnuty francouzské IGNF definice v srs.db
-
-
- WMS provider makes requests asynchronously through QNetworkAccessManager now
- Poskytovatel WMS nyní vytváří požadavky asynchronně přes QNetworkAccessManager
-
-
- WMS selection allows inserting of all layers of a branch
- WMS výběr dovoluje vkládání všech vrstev větve
-
-
- WMS has support for more MIME types
- WMS má podporu pro více MIME typů
-
-
- Added load/save to WMS dialog
- Přidán dialog načíst z/uložit do WMS
-
-
- WMS-C scale slider gui added and more selection improvements
- Přidán posuvník měřítka WMS-Ca další vylepšení výběru
-
-
- API Updates
- Aktualizace API
-
-
- QgsDataProvider & QgsMapLayer: add dataChanged() signal, so that a provider can signal that the datasource changed
- QgsDataProvider & QgsMapLayer: přidává dataChanged() signál, takže poskytovatel může informovat, že se zdroj dat změnil
-
-
- Allow opening layer properties from plugins
- Povoleno otvírání vlastností vrstev v zásuvných modulech
-
-
- Support for custom plugin layers.
- Podpora pro vrstvy vlastních zásuvných modulů.
-
-
- Allow refreshing of plugins programmatically
- Povolena aktualizace zásuvných modulů programově
-
-
- Support for custom plugin directories using the QGIS_PLUGINPATH environment variable. More paths can be passed, separated by semicolon.
- Podpora pro vlastní složky zásuvných modulů s využitím proměnné prostředí QGIS_PLUGINPATH. Může být zadáno více cest oddělených středníkem.
-
-
- Legend interface added to retrieve layers in legend order
- Přidáno rozhraní legendy k obdržení vrstev v pořadí legendy
-
-
- Support more GEOS operators
- Podpora více GEOS operátorů
-
-
- %1 doesn't have any layers
- %1 nemá žádné vrstvy
-
-
- %1 is not a valid or recognized data source
- %1 není platný nebo rozpoznaný zdroj dat
-
-
- Select zip layers to add...
- Vyberte ZIP vrstvy pro přidání...
-
-
- Vector
- Vektor
-
-
- Cannot get MSSQL select dialog from provider.
- Nemohu získat dialog výběru MSSQL od poskytovatele.
-
-
- WCS
- WCS
-
-
- Cannot get WCS select dialog from provider.
- Nemohu získat dialog výběru WCS od poskytovatele.
-
-
- Saved project to: %1
- Projekt uložen do: %1
-
-
- Unable to save project %1
- Nemohu uložit projekt %1
-
-
- Saved map image to %1
- Soubor obrázku uložen do %1
-
-
- Please select a vector layer first.
- Vyberte prosím nejdřív vektorovou vrstvu.
-
-
- Layer labeling settings
- Nastavení popisků vrstvy
-
-
- Delete features
- Smazat prvky
-
-
- Delete %n feature(s)?
- number of features to delete
-
- Smazat %n prvek?
- Smazat %n prvky?
- Smazat %n prvků?
-
-
-
- Features deleted
- Prvky smazány
-
-
- Merging features...
- Slučuji prvky...
-
-
- Abort
- Přerušit
-
-
- Composer %1
- Tvůrce mapy %1
-
-
- No active layer
- Žádná aktivní vrstva
-
-
- No active layer found. Please select a layer in the layer list
- Nenalezena žádná aktivní vrstva. Prosím vyberte vrstvu v seznamu vrstev
-
-
- Active layer is not vector
- Aktivní vrstva není vektorová
-
-
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
- Nástroj sloučení prvků funguje pouze na vektorové vrstvy. Vyberte prosím vektorovou vrstvu ze seznamu vrstev
-
-
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
- Slučování prvků je možné pouze pro vrstvy v editačním módu. K použití nástroje slučování, jdete na Vrstva->Přepnout editaci
-
-
- The merge tool requires at least two selected features
- Nástroj slučování vyžaduje alespoň dva vybrané prvky
-
-
- Not enough features selected
- Nebyl vybrán dostatek prvků
-
-
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
- Operace sjednocení by vytvořila typ geometrie nekompatibilní s aktuální vrstvou a proto byla zrušena
-
-
- Union operation canceled
- Operace Sjednocení zrušena
-
-
- Merged features
- Sloučené prvky
-
-
- Features cut
- Prvky vyjmuty
-
-
- Features pasted
- Prvky vloženy
-
-
- Cannot copy style: %1
- Nemohu zkopírovat styl: %1
-
-
- Cannot parse style: %1:%2:%3
- Nemohu parsovat styl: %1:%2:%3
-
-
- Cannot read style: %1
- Nemohu číst styl: %1
-
-
- Could not commit changes to layer %1
-
-Errors: %2
-
- Nemohu provést změny ve vrstvě %1
-
-Chyby: %2
-
-
-
- QGIS - Changes in SVN since last release
- QGIS - změny v SVN od posledního vydání
-
-
- Unable to communicate with QGIS Version server
-%1
- Nemohu komunikovat se serverem verzí QGISu
-%1
-
-
- To perform a full histogram stretch, you need to have a raster layer selected.
- Pro provedení celkového roztažení histogramu musíte nejdříve vybrat rastrovou vrstvu.
-
-
- To perform a local histogram stretch, you need to have a grayscale or multiband (multiband single layer, singleband grayscale or multiband color) raster layer selected.
- Pro provedení lokálního roztažení histogramu musíte nejdříve vybrat rastrovou vrstvu ve stupních šedi nebo multipásmovou (jedna multipásmová vrstva, jednopásmová ve stupních šedi nebo multipásmová barevná).
-
-
- To perform a local histogram stretch, you need to have a raster layer selected.
- Pro provedení lokálního roztažení histogramu musíte nejdříve vybrat rastrovou vrstvu.
-
-
- No Raster Layer Selected
- Nevybrána žádná rastrová vrstva
-
-
- No Valid Raster Layer Selected
- Nevybrána žádná platná rastrová vrstva
-
-
- %1 is not a valid or recognized raster data source
- %1 není platný nebo rozpoznaný zdroj rastrových dat
-
-
- %1 is not a supported raster data source
- %1 není podporovaný zdroj rastrových dat
-
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
- <p>Tento soubor projektu byl uložen ve starší verzi QGISu. Při ukládání ho QGIS aktualizuje na nejnovější verzi, což může způsobit jeho nepoužitelnost ve starší verzi QGISu.<p>Přestože se vývojáři QGISu snaží zajistit zpětnou kompatibilitu, některé informace ze starého projektu mohou být ztraceny. V zájmu zlepšování kvality QGISu bychom ocenili, abyste případnou chybu hlásili na %3. Ujistěte se, že jste přiložili starý soubor projektu a uveďte vámi používanou verzi QGISu, abychom mohli chybu objevit a odstranit.<p>K odstranění tohoto varování při otvírání projektu starší verze, zrušte zaškrtnutí políčka '%5' v menu %4.<p>Verze souboru projektu: %1<br>Aktuální verze QGISu: %2
-
-
- Add SpatiaLite Layer...
- Přidat vrstvu SpatiaLite...
-
-
- Add a SpatiaLite Layer
- Přidat vrstvu SpatiaLite
-
-
-
-This copy of QGIS has been built without SpatiaLite support.
-
-Tato kopie QGISu byla vytvořena bez podpory SpatiaLite.
-
-
- Zoom Next
- Přiblížit na další
-
-
- Zoom to Forward Extent
- Přiblížit na následující rozsah
-
-
- Simplify Feature
- Zjednodušit prvek
-
-
- Delete Ring
- Smazat prstenec
-
-
- Delete Part
- Smazat část
-
-
- Configure shortcuts...
- Nastavit zástupce...
-
-
- Configure shortcuts
- Nastavit zástupce
-
-
- Advanced Digitizing
- Pokročilá digitalizace
-
-
- &Raster
- &Rastr
-
-
-
- QgisAppBase
-
- QGIS
- QGIS
+ Vyskytla se %n chyba SSL Vyskytly se %n chyby SSL Vyskytlo se %n chyb SSL
QgisAppInterface
-
- Run actions
- Spustit akci
-
Attributes changed
@@ -18436,55 +13246,11 @@ Tato kopie QGISu byla vytvořena bez podpory SpatiaLite.
QgsAbout
-
- About Quantum GIS
- O programu Quantum GIS
-
-
- about:blank
- about:blank
-
-
- Essen (Germany), Developer meeting 2012
- Essen (Německo), Setkání vývojářů 2012
-
-
- Donors
- Dárci
-
About
O programu
-
- Version
- Verze
-
-
- What's New
- Co je nového
-
-
- http://www.gnu.org/licenses
- http://www.gnu.org/licenses
-
-
- Contributors
- Autoři
-
-
- QGIS Home Page
- QGIS domovská stránka
-
About QGIS
@@ -18493,13 +13259,13 @@ Tato kopie QGISu byla vytvořena bez podpory SpatiaLite.
License
- Licence
+ Licence
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -18511,6 +13277,32 @@ p, li { white-space: pre-wrap; }
QGIS is licensed under the GNU General Public License
QGIS je licencován pod GNU General Public License
+
+ http://www.gnu.org/licenses
+ http://www.gnu.org/licenses
+
+
+ QGIS Home Page
+ QGIS domovská stránka
+
+
+ Join our user mailing list
+ Připojte se do naší mailové konference
+
+
+ about:blank
+ about:blank
+
+
+ What's New
+ Co je nového
+
Providers
@@ -18522,28 +13314,24 @@ p, li { white-space: pre-wrap; }
Vývojáři
- Sponsors
- Sponzoři
+ Essen (Germany), Developer meeting 2012
+ Essen (Německo), Setkání vývojářů 2012
- Quantum GIS is licensed under the GNU General Public License
- Quantum GIS je šíren pod licencí GNU General Public License
+ Contributors
+ Autoři
- Name
- Název
+ Translators
+ Překladatelé
- Website
- Webové stránky
-
-
- <p>QGIS sponsorship programme:contribute to QGIS development</p>
- <p>Program sponzorství QGISu: přispějte na vývoj QGISu</p>
-
-
- <p>The following individuals and institutions have contributed money to fund QGIS development and other project costs</p>
- <p>Následujíc jednotlivci a instituce přispěli penězmi na financování vývoje QGISu a na další náklady projektu</p>
+ Donors
+ Dárci
Qt Image Plugin Search Paths <br>
Vyhledávací cesty obrazového zásuvného modulu Qt <br>
-
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">Quantum GIS (QGIS)</span></p></body></html>
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">Quantum GIS (QGIS)</span></p></body></html>
-
-
- Join our user mailing list
- Připojte se do naší mailové konference
-
-
- <p>The following have contributed to QGIS by translating the user interface or documentation</p>
- <p>Tito lidé přispěli QGISu překladem uživatelského rozhraní nebo dokumentace</p>
-
-
- Language
- Jazyk
-
-
- Names
- Jména
-
-
- Translators
- Překladatelé
-
QgsAddAttrDialog
@@ -18618,10 +13374,6 @@ p, li { white-space: pre-wrap; }
QgsAddAttrDialogBase
-
- Add Attribute
- Přidat atribut
-
Add column
@@ -18743,20 +13495,11 @@ p, li { white-space: pre-wrap; }
Form
Formulář
-
- Map position fixed
- Pozice mapy fixována
-
Fixed map position
Pevná pozice mapy
-
- Background color
- Barva pozadí
-
Map marker
@@ -18767,6 +13510,11 @@ p, li { white-space: pre-wrap; }
Frame width
Šířka rámu
+
+ Background color
+ Barva pozadí
+
Frame color
@@ -18778,108 +13526,108 @@ p, li { white-space: pre-wrap; }
&Expand All
- &Rozbalit vše
+
&Collapse All
- &Sbalit vše
+
&Remove
-
&Set Group CRS
- &Nastavit SRS skupiny
+
&Zoom to Best Scale (100%)
- &Zoom na nejvhodnější měřítko (100%)
+
&Stretch Using Current Extent
- &Roztáhnout na aktuální rozsah
+
&Duplicate
- &Duplikovat
+
&Set Layer Scale Visibility
-
&Set Layer CRS
- &Nastavit SRS vrstvy
+
Set &Project CRS from Layer
- Nastavit SRS &projektu z vrstvy
+
&Open Attribute Table
- &Otevřít atributovou tabulku
+
Save As...
- Uložit jako...
+
Save As Layer Definition File...
-
&Filter...
- &Filtr...
+
&Properties
- &Vlastnosti
+
Copy Style
- Kopírovat styl
+
Paste Style
- Vložit styl
+
QgsApplication
- Exception
Výjimka
- unknown exception
neznámá výjimka
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -18903,124 +13651,82 @@ Cesty k hledání SVG: %8
Cesta k uživatelské DB: %9
- [ERROR] Can not make qgis.db private copy
- [CHYBA] Nemohu udělat soukromou kopii qgis.db
-
-
- Could not open qgis.db
- Nemohu otevřít qgis.db
-
-
- Migration of private qgis.db failed.
-%1
- Migrace soukromého qgis.db se nezdařila.
-%1
-
-
- Update of view in private qgis.db failed.
-%1
- Aktualizace zobrazení v soukromé qgis.db selhala.
-%1
-
-
- Application state:
-Prefix: %1
-Plugin Path: %2
-Package Data Path: %3
-Active Theme Name: %4
-Active Theme Path: %5
-Default Theme Path: %6
-SVG Search Paths: %7
-User DB Path: %8
-
- Stav programu:
-Předpona: %1
-Cesta k zásuvným modulům: %2
-Cesta k datům balíčků: %3
-Název aktivního tématu: %4
-Cesta k aktivního tématu: %5
-Cesta k výchozímu tématu: %6
-SVG prohledávané cesty: %7
-Cesta k uživatelské DB: %8
-
-
-
-
match indentation of application state
+
+ [ERROR] Can not make qgis.db private copy
+ [CHYBA] Nemohu udělat soukromou kopii qgis.db
+
+
+ Could not open qgis.db
+ Nemohu otevřít qgis.db
+
+
+ Migration of private qgis.db failed.
+%1
+ Migrace soukromého qgis.db se nezdařila.
+%1
+
+
+ Update of view in private qgis.db failed.
+%1
+ Aktualizace zobrazení v soukromé qgis.db selhala.
+%1
+
QgsAtlasComposition
- Filename parsing error: %1
- Chyba parsování názvu souboru: %1
-
-
- Feature filter parser error: %1
- Chyba parseru filtru prvkůr: %1
-
-
- Feature filter eval error: %1
- Chyba vyhodnocení filtru prvkůr: %1
-
-
- Atlas filter eval error: %1
-
- Composer
- Tvorba mapy
+
- No matching atlas features
- Žádné odpovídající prvky atlasu!
- Atlas feature %1 of %2
- Prvek atlasu %1 of %2
- Atlas filename evaluation error: %1
-
-
- Filename eval error: %1
- Chyba vyhodnocení názvu souboru: %1
+
QgsAtlasCompositionWidget
-
- Map %1
- Mapa %1
-
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Atlas preview
- Náhled atlasu
No matching atlas features found!
- Nenalezeny žádné odpovídající prvky atlasu!
Coverage layer
-
-
- Composer map
- Tvorba map
-
-
- Coverage layer
- Vrstva pokrytí
-
-
- Visibility
- Viditelnost
+
Hidden coverage layer
Skrytá vrstva pokrytí
-
- Feature sorting
- Řazení prvků
-
Sort by
@@ -19103,31 +13793,11 @@ Parser error:
...
...
-
- Feature filtering
- Filtrování prvků
-
Filter with
Filtrovat s
-
- Scaling
- Škálování
-
-
- Margin around feature
- Ohraničení kolem prvku
-
-
- %
- %
-
-
- Fixed scale
- Pevné měřítko
-
Output
@@ -19205,117 +13875,6 @@ Parser error:
QgsAttributeActionDialogBase
-
- Name
- Název
-
-
- Action
- Akce
-
-
- Move up
- Posunout nahoru
-
-
- Move the selected action up
- Posunout vybranou akci nahoru
-
-
- Move down
- Posunout dolů
-
-
- Move the selected action down
- Posunout vybranou akci dolů
-
-
- Remove
- Odebrat
-
-
- Remove the selected action
- Odebrat vybranou akci
-
-
- Enter the name of an action here. The name should be unique (qgis will make it unique if necessary).
- Zde vložte název akce. Název by měl být jedinečný (pokud to bude potřebné qgis jej učiní jedinečným).
-
-
- Enter the action name here
- Sem vložte název akce
-
-
- Enter the action command here
- Sem vložte příkaz akce
-
-
- Insert action
- Vložit akci
-
-
- Inserts the action into the list above
- Vložit akci do seznamu nahoře
-
-
- Update action
- Aktualizovat akci
-
-
- Update the selected action
- Aktualizovat vybranou akci
-
-
- Insert field
- Vložit pole
-
-
- Inserts the selected field into the action, prepended with a %
- Vložit vybrané pole do akce, uvozené %
-
-
- The valid attribute names for this layer
- Správné jména atributů pro tuto vrstvu
-
-
- This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Insert action button. Actions can be edited here by double clicking on the item.
- Tento seznam obsahuje všechny akce, které byly definovány pro aktuální vrstvu. Akce je možné přidat vložením detailů do ovládacích prvků dole a následně tlačítkem Vložit akci. Akce lze upravit přímo zde dvojklikem na danou položku.
-
-
- Capture
- Sledovat
-
-
- Capture output
- Sledovat výstup
-
-
- Captures any output from the action
- Sleduje libovolný výstup akce
-
-
- Captures the standard output or error generated by the action and displays it in a dialog box
- Sleduje standardní výstup nebo chybu generovanou akcí a zobrazí ji v dialogovém okně
-
Attribute Actions
@@ -19338,8 +13897,36 @@ Parser error:
Typ
- Remove action
- Odstranit akci
+ Name
+ Název
+
+
+ Action
+ Akce
+
+
+ Capture
+ Sledovat
+
+
+ Remove the selected action
+ Odebrat vybranou akci
+
+
+ Move the selected action up
+ Posunout vybranou akci nahoru
+
+
+ Move the selected action down
+ Posunout vybranou akci dolů
Action properties
Vlastnosti akce
+
+ Generic
+ Generický
+
+
+ Python
+ Python
+
+
+ Mac
+ Mac
+
+
+ Windows
+ Windows
+
+
+ Unix
+ Unix
+
Open
Otevřít
+
+ Captures any output from the action
+ Sleduje libovolný výstup akce
+
+
+ Captures the standard output or error generated by the action and displays it in a dialog box
+ Sleduje standardní výstup nebo chybu generovanou akcí a zobrazí ji v dialogovém okně
+
+
+ Capture output
+ Sledovat výstup
+
+
+ Enter the name of an action here. The name should be unique (qgis will make it unique if necessary).
+ Zde vložte název akce. Název by měl být jedinečný (pokud to bude potřebné qgis jej učiní jedinečným).
+
+
+ Enter the action name here
+ Sem vložte název akce
+
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
Zadejte akci zde. Může to být nějaký program, skript, nebo příkaz, který je dostupný na vašem systému. Když je tato akce vyvolána, každá sada znaků začínající na % a název pole bude nahrazen hodnotou pole. Speciální znaky %% budou nahrazeny hodnotou vybraného pole. Dvojité uvozovky seskupí text do jednotlivých argumentů programu, skriptu nebo příkazu. Dvojité uvozovkybudou ignorovány, pokud bude před nimi zpětné lomítko
+
+ Enter the action command here
+ Sem vložte příkaz akce
+
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
@@ -19376,6 +14019,11 @@ Parser error:
Click to browse for an action
Klikněte pro vybrání akce
+
+ Clicking the button will let you select an application to use as the action
+ Kliknutí na tlačítko umožní vybrat aplikaci a tu použít jako akci
+
...
@@ -19391,105 +14039,48 @@ Parser error:
Insert expression...
Vložit výraz...
+
+ The valid attribute names for this layer
+ Správné jména atributů pro tuto vrstvu
+
Inserts the selected field into the action
Vloží vabrané pole do akce
+
+ Insert field
+ Vložit pole
+
+
+ Inserts the action into the list above
+ Vložit akci do seznamu nahoře
+
Add to action list
Přidat do seznamu akcí
- Update selected action
+ Update the selected action
Aktualizovat vybranou akci
- Generic
- Generický
-
-
- Python
- Python
-
-
- Windows
- Windows
-
-
- Mac
- Mac
-
-
- Unix
- Unix
-
-
- Clicking the button will let you select an application to use as the action
- Kliknutí na tlačítko umožní vybrat aplikaci a tu použít jako akci
+ Update selected action
+ Aktualizovat vybranou akci
QgsAttributeDialog
-
- (int)
- (int)
-
-
- (dbl)
- (dbl)
-
-
- (txt)
- (txt)
-
-
- Error
- Chyba
-
-
- Error: %1
- Chyba: %1
-
-
- Attributes - %1
- Atributy - %1
-
Feature Attributes
-
-
-
- QgsAttributeEditor
-
- Select a file
- Vybrat soubor
-
-
- Select a date
- Zvolte datum
-
-
- (no selection)
- (žádný výběr)
-
-
- ...
- ...
-
-
- <
- <
+
@@ -19497,7 +14088,7 @@ Parser error:
Attributes changed
- Atributy změněny
+
@@ -19537,27 +14128,11 @@ Parser error:
Insert NULL value on top
-
QgsAttributeSelectionDialog
-
- Attribute
- Atribut
-
-
- Alias
- Alias
-
-
- Select all
- Vybrat vše
-
-
- Clear
- Vyčistit
-
Ascending
@@ -19579,49 +14154,18 @@ Parser error:
Columns
- Sloupce
+
Reset
- Reset
-
-
- <b>Attribute</b>
- <b>Atribut</b>
-
-
- <b>Alias</b>
- <b>Alias</b>
-
-
- Select all
- Vybrat vše
-
-
- Clear
- Vyčistit
+
Sorting
Řazení
-
- Column
- Sloupec
-
-
- Ascending
- Vzestupně
-
-
-
- QgsAttributeTableAction
-
- Attributes changed
- Atributy změněny
-
QgsAttributeTableDelegate
@@ -19634,39 +14178,245 @@ Parser error:
QgsAttributeTableDialog
- Search string parsing error
- Chyba při kontrole hledaného řetězce
+ Attribute Table
+ Atributová tabulka
- Search results
- Výsledek hledání
+ Case sensitive
+ Rozlišování písmen
- You've supplied an empty search string.
- Zadal jste prázdný řetězec pro hledání.
+ ?
+ ?
- Error during search
- Chyba během hledání
+ Delete selected features (DEL)
+
+
+ Unselect all (Ctrl+U)
+ Zrušit výběr všeho (Ctrl+U)
+
+
+ Ctrl+U
+ Ctrl+U
+
+
+ Move selection to top (Ctrl+T)
+ Přesunout výběr nahoru (Ctrl+T)
+
+
+ Ctrl+T
+ Ctrl+T
+
+
+ Invert selection (Ctrl+R)
+ Invertovat výběr (Ctrl+R)
+
+
+ Ctrl+S
+ Ctrl+S
+
+
+ Copy selected rows to clipboard (Ctrl+C)
+ Kopírovat vybrané řádky do schránky (Ctrl+C)
+
+
+ Ctrl+C
+ Crtl+C
+
+
+ Zoom map to the selected rows (Ctrl+J)
+ Přiblížit mapu na vybrané řádky (Ctrl+J)
+
+
+ Ctrl+J
+ Ctrl+J
+
+
+ Pan map to the selected rows (Ctrl+P)
+ Posunout mapu na vybrané řádky (Ctrl+P)
+
+
+ Ctrl+P
+ Ctrl+P
+
+
+ Toggle editing mode (Ctrl+E)
+ Přepnout režim editace (Ctrl+E)
+
+
+ Ctrl+E
+ Ctrl+E
+
+
+ Save Edits (Ctrl+S)
+ Uložit úpravy (Ctrl+S)
+
+
+ ...
+ ...
+
+
+ Select features using an expression
+ Vybrat prvky pomocí vzorce
+
+
+ New column (Ctrl+W)
+ Nový sloupec (Ctrl+W)
+
+
+ Ctrl+W
+ Ctrl+W
+
+
+ Filter
+ Filtr
+
+
+ Filters the visible features according to the current filter selection and filter string.
+ Filtruje viditelné prvky podle aktuálně zvoleného filtru a filtrovacího řetězce.
+
+
+ Apply
+ Použít
+
+
+ mMainViewButtonGroup
+
+
+ Table View
+ Zobrazení tabulky
+
+
+ =
+ =
+
+
+ Update All
+ Aktualizovat vše
+
+
+ Advanced Filter (Expression)
+ Pokročilý filtr (výraz)
+
+
+ Use the Expression Builder to define the filter
+ Použijte Tvůrce Výrazů pro definování filtru
+
+
+ Ctrl+F
+ Ctrl+F
+
+
+ Show All Features
+ Zobrazit všechny prvky
+
+
+ Show Selected Features
+ Zobrazit vybrané prvky
+
+
+ Show Edited and New Features
+ Zobrazit editované a vybrané prvky
+
+
+ Show Features Visible On Map
+ Zobrazit prvky viditelné na mapě
+
+
+ The filter defines which features are currently shown in the list or on the table
+
+
+ Form View
+
+
+ Column Filter
+ Filtr sloupců
+
+
+ Filter all the features which have been edited but not yet saved
+ Filtrovat všechny prvky, které byly upraveny ale ještě nebyly uloženy
+
+
+ Delete column (Ctrl+L)
+ Smazat sloupec (Ctrl+L)
+
+
+ Ctrl+L
+ Ctrl+L
+
+
+ Add feature
+ Přidat prvek
+
+
+ Open field calculator (Ctrl+I)
+ Otevří kalkulátor polí (Ctrl+I)
+
+
+ Ctrl+I
+ Ctrl+I
Attribute table - %1 (%n Feature(s))
feature count
-
- Atributová tabulka - %1 (%n prvek)
- Atributová tabulka - %1 (%n prvky)
- Atributová tabulka - %1 (%n prvků)
-
-
-
- Attribute table - %1 :: %n / %2 feature(s) selected
- feature count
-
- Atributová tabulka - %1 :: %n / %2 prvek vybrán
- Atributová tabulka - %1 :: %n / %2 prvky vybrány
- Atributová tabulka - %1 :: %n / %2 prvků vybráno
-
+ Atributová tabulka - %1 (%n prvek) Atributová tabulka - %1 (%n prvky) Atributová tabulka - %1 (%n prvků)
Evaluation error
Chyba hodnocení
-
- Attribute table - %1 (%n matching features)
- matching features
-
- Atributová tabulka - %1 (%n odpovídající prvek)
- Atributová tabulka - %1 (%n odpovídající prvky)
- Atributová tabulka - %1 (%n odpovídajících prvků)
-
-
-
- Attribute table - %1 (No matching features)
- Atributová tabulka - %1 (žádné odpovídající prvky)
-
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
@@ -19699,18 +14436,18 @@ Parser error:
Update Filtered
-
Error
- Chyba
+ Chyba
An error occured while evaluating the calculation string:
%1
- Při hodnocení výpočetního řetězce došlo k chybě:
+ Při hodnocení výpočetního řetězce došlo k chybě:
%1
@@ -19758,396 +14495,9 @@ Parser error:
Geometryless feature added
Prvek bez geometrie přidán
-
- Run action
- Spustit akci
-
-
- Open form
- Otevřít formulář
-
-
- Loading feature attributes...
- Načítám atributy prvku...
-
-
- Abort
- Přerušit
-
-
- Attribute table
- Atributová tabulka
-
-
- %1 features loaded.
- %1 prvků načteno.
-
-
- Attribute Table
- Atributová tabulka
-
-
- Show selected only
- Zobrazit jen vybrané
-
-
- Search selected only
- Prohledávat jen vybrané
-
-
- Case sensitive
- Rozlišování písmen
-
-
- ?
- ?
-
-
- Close
- Zavřít
-
-
- Unselect all (Ctrl+U)
- Zrušit výběr všeho (Ctrl+U)
-
-
- Ctrl+U
- Ctrl+U
-
-
- Move selection to top (Ctrl+T)
- Přesunout výběr nahoru (Ctrl+T)
-
-
- Invert selection (Ctrl+S)
- Invertovat výběr (Ctrl+S)
-
-
- Invert selection (Ctrl+R)
- Invertovat výběr (Ctrl+R)
-
-
- Zoom map to the selected rows (Ctrl+J)
- Přiblížit mapu na vybrané řádky (Ctrl+J)
-
-
- Pan map to the selected rows (Ctrl+P)
- Posunout mapu na vybrané řádky (Ctrl+P)
-
-
- Ctrl+P
- Ctrl+P
-
-
- Toggle editing mode (Ctrl+E)
- Přepnout režim editace (Ctrl+E)
-
-
- Ctrl+E
- Ctrl+E
-
-
- Save Edits (Ctrl+S)
- Uložit úpravy (Ctrl+S)
-
-
- Delete selected features (Ctrl+D)
- Smazat vybrané prvky (Ctrl+D)
-
-
- Ctrl+D
- Ctrl+D
-
-
- Select features using an expression
- Vybrat prvky pomocí vzorce
-
-
- New column (Ctrl+W)
- Nový sloupec (Ctrl+W)
-
-
- Ctrl+W
- Ctrl+W
-
-
- The filter defines, which features are currently shown in the list or on the table
- Filtr definuje, které prvky jsou aktuálně zobrazeny v seznamu nebo v tabulce
-
-
- The filter defines which features are currently shown in the list or on the table
-
-
- Filter
- Filtr
-
-
- Filters the visible features according to the current filter selection and filter string.
- Filtruje viditelné prvky podle aktuálně zvoleného filtru a filtrovacího řetězce.
-
-
- Apply
- Použít
-
-
- Attribute View
- Zobrazení atributu
-
-
- Form View
-
-
- mMainViewButtonGroup
-
-
- Table View
- Zobrazení tabulky
-
-
- =
- =
-
-
- Update All
-
-
- Advanced Filter (Expression)
- Pokročilý filtr (výraz)
-
-
- Use the Expression Builder to define the filter
- Použijte Tvůrce Výrazů pro definování filtru
-
-
- Ctrl+F
- Ctrl+F
-
-
- Show All Features
- Zobrazit všechny prvky
-
-
- Show Selected Features
- Zobrazit vybrané prvky
-
-
- Show Edited and New Features
- Zobrazit editované a vybrané prvky
-
-
- Show All
- Zobrazit vše
-
-
- Show Selected
- Zobrazit vybrané
-
-
- Show Features Visible On Map
- Zobrazit prvky viditelné na mapě
-
-
- Column Filter
- Filtr sloupců
-
-
- Filter Edited
- Filtr upraven
-
-
- Filter all the features which have been edited but not yet saved
- Filtrovat všechny prvky, které byly upraveny ale ještě nebyly uloženy
-
-
- Delete column (Ctrl+L)
- Smazat sloupec (Ctrl+L)
-
-
- Ctrl+L
- Ctrl+L
-
-
- Add feature
- Přidat prvek
-
-
- +
- +
-
-
- Delete selected features (DEL)
-
-
- Open field calculator (Ctrl+I)
- Otevří kalkulátor polí (Ctrl+I)
-
-
- Ctrl+I
- Ctrl+I
-
-
- Unselect all
- Zrušit výběr
-
-
- Move selection to top
- Přesunout výběr nahoru
-
-
- Ctrl+T
- Ctrl+T
-
-
- Invert selection
- Převrátit výběr
-
-
- Ctrl+S
- Ctrl+S
-
-
- Copy selected rows to clipboard (Ctrl+C)
- Kopírovat vybrané řádky do schránky (Ctrl+C)
-
-
- Ctrl+C
- Crtl+C
-
-
- Zoom map to the selected rows (Ctrl-J)
- Přiblížit mapu na vybrané záznamy (Ctrl-J)
-
-
- Ctrl+J
- Ctrl+J
-
-
- Toggle editing mode
- Přepnout editační mód
-
-
- New column
- Nový sloupec
-
-
- Delete column
- Smazat sloupec
-
-
- Open field calculator
- Otevřít v kalkulačce polí
-
-
- Look for
- Hledat (co)
-
-
- in
- v
-
-
- Looks for the given value in the given attribute column
- Hledá zadanou hodnotu v zadaném sloupci atributů
-
-
- &Search
- &Hledání
-
-
- Show selected records only
- Zobrazit pouze vybrané záznamy
-
-
- Opens the search query builder
- Otevřít tvorbu hladacích dotazů
-
-
- Advanced search
- Rozšířené vyhledávání
-
-
- Help
- Nápověda
-
-
- Delete selected features
- Smazat vybrané prvky
-
-
- ...
- ...
-
-
- Search selected records only
- Hledat pouze ve vybraných záznamech
-
QgsAttributeTableModel
-
- Attribute changed
- Atribut změněn
-
-
- Attributes changed
- Atributy změněny
-
feature id
@@ -20156,14 +14506,6 @@ Parser error:
QgsAttributeTableView
-
- Run action
- Spustit akci
-
-
- Open form
- Otevřít formulář
-
Select All
@@ -20172,225 +14514,10 @@ Parser error:
QgsAttributeTypeDialog
-
- Edit filter expression
- Upravit výraz filtru
-
-
- Select a file
- Vybrat soubor
-
-
- Error
- Chyba
-
-
- Could not open file %1
-Error was:%2
- Nemohu otevřít soubor %1
-Chyba byla:%2
-
-
- Dial
- Číselník
-
-
- Current minimum for this value is %1 and current maximum is %2.
- Aktuální minimum pro tuto hodnotu je %1 a aktuální maximum je %2.
-
-
- Attribute has no integer or real type, therefore range is not usable.
- Atribut není celé číslo ani reálné, proto není rozsah použitelný.
-
-
- Enumeration is not available for this attribute
- Výčet není k dispozici pro tento atribut
-
-
- Field contains an URL
- Pole obsahuje URL odkaz
-
-
- Attribute Edit Dialog
- Dialog editace atributu
-
-
- Line edit
- Úprava linie
-
-
- Classification
- Klasifikace
-
-
- Range
- Rozsah
-
-
- Unique values
- Jedinečné hodnoty
-
-
- File name
- Název souboru
-
-
- Value map
- Mapa hodnot
-
-
- Enumeration
- Výčet
-
-
- Immutable
- Nezměnitelný
-
-
- Hidden
- Skryté
-
-
- Checkbox
- Zaškrtávací pole
-
-
- Text edit
- Úprava textu
-
-
- Calendar
- Kalendář
-
-
- Value relation
- Relace hodnoty
-
-
- UUID generator
- UUID generátor
-
-
- Photo
- Foto
-
-
- Webview
- Web zobrazení
-
-
- Color
- Barva
-
Edit Widget Properties
-
-
- Label on top
- Popisek navrch
-
-
- Simple edit box. This is the default editation widget.
- Jednoduchý editační box. Toto je výchozí editační doplněk.
-
-
- Displays combo box containing values of attribute used for classification.
- Zobrazí combo box obsahující hodnoty použité pro klasifikaci.
-
-
- Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
- Umožňuje nastavit číselné hodnoty z určeného rozsahu. Editovací doplněk může být jak posuvník tak otočný volič.
-
-
- Minimum
- Minimum
-
-
- Maximum
- Maximum
-
-
- Step
- Krok
-
-
- Date format
- Formát data
-
-
- A calendar widget to enter a date.
- Kalendářový doplněk k zadání data.
-
-
- <html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
- <html><head/><body><p>Ukázka formátů:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Formát</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Výsledek</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Referenční dokumentace</span></a></p></body></html>
-
-
- Layer
- Vrstva
-
-
- Key column
- Sloupec klíčů
-
-
- Allow multiple selections
- Povolit vícenásobné výběry
-
-
- Value column
- Sloupec hodnot
-
-
- Filter expression
- Výraz filtru
-
-
- ...
- ...
-
-
- Height
- Výška
-
-
- Width
- Šířka
-
-
- Field contains a filename for a picture
- Pole obsahuje název souboru pro obrázek
-
-
- Fields contains an URL
- Pole obsahuje URL odkaz
-
-
- Field contains a color
- Pole obsahuje barvu
-
-
- Select layer, key column and value column
- Zvolte vrstvu. sloupec klíčů a sloupec hodnot
-
-
- Allow null value
- Povolit nulové hodnoty
-
-
- Order by value
- Seřadit podle hodnot
-
-
- Read-only field that generates a UUID if empty.
- Pole jen ke čtení, které vytvoří UUID, pokud je prázdné.
-
-
- Slider
- Posuvník
+
Editovatelný
- Local minimum/maximum = 0/0
- Lokální minimum/maximum = 0/0
-
-
- The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
- Uživatel může vybrat jednu z hodnot už použitou v atributu. Pokud je atribut editovatelný, je zobrazena liniová editace s podporou automatického dokončení, jinak je použit combo box.
-
-
- Simplifies file selection by adding a file chooser dialog.
- Zjednodušuje editaci přidáním dialogu výběru souboru.
-
-
- Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
- Combo box s předefinovanými položkami. Hodnota je ukládaná v atributu, popis je zobrazen v combo boxu.
-
-
- Load Data from layer
- Načíst data z vrstvy
-
-
- Value
- Hodnota
-
-
- Description
- Popis
-
-
- Remove Selected
- Odstranit vybrané
-
-
- Load Data from CSV file
- Načíst data z CSV souboru
-
-
- Combo box with values that can be used within the column's type. Must be supported by the provider.
- Combo box s hodnotami, které mohou být použity v rámci typu sloupce. Musí být podporováno poskytovatelem.
-
-
- An immutable attribute is read-only - the user is not able to modify the contents.
- Neměnnitelný atribut je pouze ke čtení - uživatel nemůže upravovat obsah.
-
-
- A hidden attribute will be invisible - the user is not able to see it's contents.
- Skrytý atribut bude neviditelný - uživatel nebude schopen vidět jeho obsah.
-
-
- Representation for checked state
- Vyjádření pro zaškrtnutý stav
-
-
- Representation for unchecked state
- Vyjádření pro nezaškrtnutý stav
-
-
- A text edit field that accepts multiple lines will be used.
- Bude použito pole textové editace, které akceptuje více linií.
-
-
-
- QgsAvoidIntersectionsDialogBase
-
- Remove intersections of new polygons with layers
- Odstranit průsečíky nových polygonů s vrstvami
+ Label on top
+ Popisek navrch
@@ -20540,6 +14605,16 @@ Chyba byla:%2
&Add
&Přidat
+
+ &Delete
+ &Smazat
+
+
+ &Zoom to
+ &Přiblížit
+
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Opravdu chcete smazat %n záložku?
- Opravdu chcete smazat %n záložky?
- Opravdu chcete smazat %n záložek?
-
+ Opravdu chcete smazat %n záložku? Opravdu chcete smazat %n záložky? Opravdu chcete smazat %n záložek?
Reprojected extent is empty.
Reprojektovaný obsah je prázdný.
-
- Error deleting bookmark
- Chyba při odstraňování záložky
-
-
- &Delete
- &Smazat
-
-
- &Zoom to
- &Přiblížit
-
-
- Are you sure you want to delete the %1 bookmark?
- Opravdu chcete smazat záložku %1 ?
-
-
- Failed to delete the %1 bookmark from the database. The database said:
-%2
- Nezdařilo se smazání záložky %1 z databáze. Databáze sdělila:
-%2
-
QgsBookmarksBase
@@ -20668,22 +14715,6 @@ Databáze: %2
Geospatial Bookmarks
Geoprostorové záložky
-
- Name
- Název
-
-
- Project
- Projekt
-
-
- Extent
- Rozsah
-
-
- Id
- Id
-
QgsBrowser
@@ -20763,11 +14794,7 @@ Databáze: %2
F5
- F5
-
-
- Ctrl+R
- Ctrl+R
+ F5
QgsBrowserDockWidget
-
- Browser
- Prohlížeč
-
-
- Refresh
- Obnovit
-
-
- Add Selection
- Přidat výběr
-
-
- Add Selected Layers
- Přidat vybrané vrstvy
-
-
- Collapse All
- Sbalit vše
-
-
- Add as a favourite
- Přidat jako oblíbený
-
-
- Remove favourite
- Odstranit oblíbený
-
-
- Add Layer
- Přidat vrstvu
-
-
- Properties
- Vlastnosti
-
Case Sensitive
- Rozlišovat VELKÁ/malá
+ Rozlišovat VELKÁ/malá
Normal
- Normální
+ Normální
Regular Expression
Regulární výraz
+
+ Add as a favourite
+ Přidat jako oblíbený
+
+
+ Remove favourite
+ Odstranit oblíbený
+
+
+ Properties
+ Vlastnosti
+
Fast scan this dir.
Rychlý sken tohoto adresáře.
+
+ Add Layer
+ Přidat vrstvu
+
+
+ Add Selected Layers
+ Přidat vybrané vrstvy
+
Add a directory
@@ -21007,6 +15018,11 @@ Databáze: %2
Solid
Plný
+
+ No Brush
+ Žádný štětec
+
Horizontal
@@ -21072,11 +15088,6 @@ Databáze: %2
Dense 7
Hustý 7
-
- No Brush
- Žádný štětec
-
QgsBusyIndicatorDialog
@@ -21091,104 +15102,44 @@ Databáze: %2
Form
- Formulář
+ Formulář
A calendar widget to enter a date.
- Kalendářový doplněk k zadání data.
+ Kalendářový doplněk k zadání data.
Date format
- Formát data
+ Formát data
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
- <html><head/><body><p>Ukázka formátů:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Formát</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Výsledek</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Referenční dokumentace</span></a></p></body></html>
+ <html><head/><body><p>Ukázka formátů:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Formát</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Výsledek</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Referenční dokumentace</span></a></p></body></html>
QgsCategorizedSymbolRendererV2Model
- Symbol
Symbol
- Value
Hodnota
- Label
Popisek
QgsCategorizedSymbolRendererV2Widget
-
- Value
- Hodnota
-
-
- Label
- Popisek
-
-
- Random colors
-
-
- Symbol levels...
- Úrovně symbolů...
-
-
- High number of classes!
- Vysoký počet tříd!
-
-
- Classification would yield %1 entries which might not be expected. Continue?
- Klasifikace by získala %1 nepředpokládaných vstupů. Pokračovat?
-
-
- Error
- Chyba
-
-
- There are no available color ramps. You can add them in Style Manager.
- K dispozici nejsou žádné barevné rozsahy. Můžete je přidat ve Správci stylů.
-
-
- The selected color ramp is not available.
- Vybraný barevný rozsah není dostupný.
-
-
- Confirm Delete
- Potvrdit smazání
-
-
- The classification field was changed from '%1' to '%2'.
-Should the existing classes be deleted before classification?
- Pole klasifikace bylo změněno z '%1' na '%2'.
-Měly by být existující třídy před klasifikací smazány?
-
-
- change
- změnit
-
Column
@@ -21212,7 +15163,7 @@ Měly by být existující třídy před klasifikací smazány?
Invert
- Invertovat
+ Invertovat
Advanced
Pokročilé
+
+ Random colors
+ Náhodné barvy
+
+
+ Symbol levels...
+ Úrovně symbolů...
+
+
+ High number of classes!
+ Vysoký počet tříd!
+
+
+ Classification would yield %1 entries which might not be expected. Continue?
+ Klasifikace by získala %1 nepředpokládaných vstupů. Pokračovat?
+
+
+ Error
+ Chyba
+
+
+ There are no available color ramps. You can add them in Style Manager.
+ K dispozici nejsou žádné barevné rozsahy. Můžete je přidat ve Správci stylů.
+
+
+ The selected color ramp is not available.
+ Vybraný barevný rozsah není dostupný.
+
+
+ Confirm Delete
+ Potvrdit smazání
+
+
+ The classification field was changed from '%1' to '%2'.
+Should the existing classes be deleted before classification?
+ Pole klasifikace bylo změněno z '%1' na '%2'.
+Měly by být existující třídy před klasifikací smazány?
+
QgsCharacterSelectorBase
@@ -21268,25 +15267,21 @@ Měly by být existující třídy před klasifikací smazány?
Form
- Formulář
+ Formulář
Representation for checked state
- Vyjádření pro zaškrtnutý stav
+ Vyjádření pro zaškrtnutý stav
Representation for unchecked state
- Vyjádření pro nezaškrtnutý stav
+ Vyjádření pro nezaškrtnutý stav
QgsCollapsibleGroupBoxBasic
-
- Ctrl(or Alt)-click to toggle all
- Ctrl(nebo Alt)-klik pro přepnutí na vše
-
Shift-click to expand, then collapse others
@@ -21295,30 +15290,25 @@ Měly by být existující třídy před klasifikací smazány?
Ctrl (or Alt)-click to toggle all
- Ctrl(nebo Alt)-klik pro přepnutí na vše
QgsColorButton
- Select Color
Vybrat barvu
- Copy color
- Kopírovat barvu
- Paste color
-
-
- Pick color
- Vložit barvu
@@ -21335,7 +15325,7 @@ Měly by být existující třídy před klasifikací smazány?
Random colors
- Náhodné barvy
QgsComposer
- Big image
- Veliký obrázek
-
-
- Map 1
- Mapa 1
-
-
- SVG warning
- SVG varování
-
-
- Don't show this message again
- Tuto zprávu přístě nezobrazovat
-
-
- SVG Format
- SVG formát
+ Close
+ Zavřít
QGIS
- File
- Soubor
+ Composer
+ Tvorba mapy
+
+
+ Print Composers
+ Tvorba map
+
+
+ Cu&t
+ Vyjmou&t
+
+
+ Cut
+ Vyjmout
+
+
+ &Copy
+ &Kopírovat
+
+
+ Copy
+ Kopírovat
+
+
+ &Paste
+ &Vložit
+
+
+ Paste
+ Vložit
+
+
+ Edit
+ Upravit
+
+
+ Normal
+ Normální
+
+
+ Simulate Photocopy (Grayscale)
+ Simulovat fotokopii (stupně šedi)
+
+
+ Simulate photocopy (grayscale)
+ Simulovat fotokopii (stupně šedi)
+
+
+ Simulate Fax (Mono)
+ Simulovat fax (1 barva)
+
+
+ Simulate fax (mono)
+ Simulovat fax (1 barva)
+
+
+ Simulate Color Blindness (Protanope)
+ Simulovat barvoslepost (protanopie - nevidí červenou)
+
+
+ Simulate color blindness (Protanope)
+ Simulovat barvoslepost (protanopie - nevidí červenou)
+
+
+ Simulate Color Blindness (Deuteranope)
+ Simulovat barvoslepost (deuteranopie - nevidí zelenou)
+
+
+ Simulate color blindness (Deuteranope)
+ Simulovat barvoslepost (deuteranopie - nevidí zelenou)
Layout
Rozvržení
+
+ Atlas
+ Atlas
+
+
+ Settings
+ Nastavení
+
Window
@@ -21443,14 +15511,22 @@ Měly by být existující třídy před klasifikací smazány?
Help
Nápověda
+
+ %1%
+ %1%
+
Composition
Kompozice
- Item Properties
- Vlastnosti položky
+ Item properties
+ Vlastnosti položky
Atlas generation
Vytvoření atlasu
+
+ Set as atlas feature for %1
+
+
+ x: %1 mm
+ x: %1 mm
+
+
+ y: %1 mm
+ y: %1 mm
+
+
+ page: %3
+ strana: %3
+
+
+ Enable atlas preview
+ Zapnout náhled atlasu
+
+
+ Atlas in not currently enabled for this composition!
+ Atlas není aktuálně zapnut pro tuto kompozici!
+
+
+ No matching atlas features found!
+ Nenalezeny žádné odpovídající prvky atlasu!
+
+
+ Choose a file name to save the map as
+ Vyberte jméno souboru do kterého se má uložit mapa
+
PDF Format
PDF formát
-
- Image too large
- Obrázek je příliš velký
-
-
- Creation of image with %1x%2 pixels failed. Retry without 'Print As Raster'?
- Vytvoření obrazu s %1x%2 pixely selhalo. Zkusit znovu bez 'Tisknout jako rastr'?
-
-
- To create image %1x%2 requires about %3 MB of memory. Proceed?
- Vytvoření obrázku %1x%2 vyžaduje cca %3 MB paměti. Pokračovat?
-
-
- Choose a file name to save the map image as
- Vyber jméno souboru do kterého se má uložit obrázek
-
-
- Choose a file name to save the map as
- Vyberte jméno souboru do kterého se má uložit mapa
-
-
- Close
- Zavřít
-
-
- Print Composers
- Tvorba map
-
Empty filename pattern
Prázdná šablona jména souboru
The filename pattern is empty. A default one will be used.
Šablona názvu souboru je prázdná. Použije se výchozí.
@@ -21522,14 +15608,17 @@ Měly by být existující třídy před klasifikací smazány?
Unable to write into the directory
Nemohu zapisovat do složky
- The given output directory is not writeable. Cancelling.
- Zadaná výstupní složka není zapisovatelná. Stornuji.
+ The given output directory is not writable. Cancelling.
+ Zadaná výstupní složka není zapisovatelná. Stornuji.
Atlas processing error
Chyba při zpracování atlasu
+
+ Feature filter parser error: %1
+ Chyba parseru filtru prvků: %1
+
+
+ Error creating %1.
+
Rendering maps...
Vykresluji mapy...
Abort
Přerušit
- Big image
+ Veliký obrázek
+
+
+ To create image %1x%2 requires about %3 MB of memory. Proceed?
+ Vytvoření obrázku %1x%2 vyžaduje cca %3 MB paměti. Pokračovat?
+
+
+ Choose a file name to save the map image as
+ Vyber jméno souboru do kterého se má uložit obrázek
+
+
+ Memory Allocation Error
Chyba lokace paměti
- Trying to create image #%1 ( %2x%3 @ %4dpi )may result in a memory overflow.
+ Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
- Pokoušet se vytvořit obrázek #%1 ( %2x%3 @ %4dpi ) by mohlo vyústit v přetečení paměti.
-Zkuste prosím nožší rozlišení nebo menší velikost papíru
+
- Image export error
+ Chyba exportu do obrázku
+
+
+ Directory where to save image files
Složka, kam se uloží obrazové soubory
- Image format:
Formát obrazu:
- SVG warning
+ SVG varování
+
+
+ Don't show this message again
+ Tuto zprávu přístě nezobrazovat
+
+
+ <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>Funkce exportu do SVG přítomná v QGISu má stále několik problémů kvůli chybám a nedostatkům v
- Directory where to save SVG files
- Složka, kam se uloží SVG soubory
-
-
- SVG error
-
-
- There was an error in SVG output for SVG layer
-
-
- copy
- kopírovat
-
-
- Duplicating composer...
- Duplikuji Tvůce map...
-
-
- Duplicate Composer
- Duplikovat Tvůce map
-
-
- Composer duplication failed.
- Duplikace Tvůrce map selhala.
-
-
- Save template
- Uložit šablonu
-
-
- Composer templates
- Šablony tvůce map
-
-
- Project contains composition effects
- Projekt obsahuje kompoziční efekty
-
-
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
- Pokročilé kompoziční efekty jako režimy prolínání nebo průhlednost vektorových vrstev jsou v tomto projektu zapnuty. Tyto efekty nelze vytisknout jako vektor. Doporučujeme tisk jako rastr.
-
-
- Print as raster
- Tisknout jako rastr
-
-
- Composer
- Tvorba mapy
-
-
- Cu&t
- Vyjmou&t
-
-
- Cut
- Vyjmout
-
-
- &Copy
- &Kopírovat
-
-
- Copy
- Kopírovat
-
-
- &Paste
- &Vložit
-
-
- Paste
- Vložit
-
-
- Edit
- Upravit
-
-
- Normal
- Normální
-
-
- Simulate Photocopy (Grayscale)
-
-
- Simulate photocopy (grayscale)
-
-
- Simulate Fax (Mono)
-
-
- Simulate fax (mono)
-
-
- Simulate Color Blindness (Protanope)
-
-
- Simulate color blindness (Protanope)
-
-
- Simulate Color Blindness (Deuteranope)
-
-
- Simulate color blindness (Deuteranope)
-
-
- Atlas
-
-
- Settings
- Nastavení
-
-
- %1%
- %1%
-
-
- Item properties
-
-
- Set as atlas feature for %1
-
-
- x: %1 mm
-
-
- y: %1 mm
-
-
- page: %3
-
-
- Enable atlas preview
-
-
- Atlas in not currently enabled for this composition!
-
-
- No matching atlas features found!
-
-
- The given output directory is not writable. Cancelling.
- Zadaná výstupní složka není zapisovatelná. Stornuji.
-
-
- Feature filter parser error: %1
- Chyba parseru filtru prvkůr: %1
-
-
- Error creating %1.
-
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
-Please try a lower resolution or a smaller papersize
-
-
- Image export error
-
-
- SVG export error
-
-
- on page
-
-
- Composer error
- Chyba Tvůrce map
-
-
- Error, could not create new composer
- Chyba, nemohu vytvořit nového Tvůrce map
-
-
- Loading template into composer...
- Načítám šablonu do Tvůrce map...
-
-
- Project contains WMS layers
- Projekt obsahuje vrstvy WMS
-
-
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
- Některé WMS servery (např. UMN mapserver) mají limity pro paramtery šířky a výšky. Tiskové plochy z takových serverů mohou tento limit překročit . V takovém případě nebude WMS vrstva vytištěna
-
-
- Landscape
- terén
-
-
- To create image %1 x %2 requires circa %3 MB of memory
- Vytvoření obrázku %1 x %2 vyžaduje cca %3 MB paměti
-
-
- %1 format (*.%2 *.%3)
- %1 formát (*.%2 *.%3)
-
-
- Image too big
- Obrázek je příliš velký
-
-
- Creation of image with %1x%2 pixels failed. Export aborted.
- Vytvoření obrazu s %1x%2 pixely selhalo. Export zrušen.
-
-
- <p>The SVG export function in Qgis has several problems due to bugs and deficiencies in the
- <p>SVG export Qgisu trpí několika problémy nedostatky v
-
-
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4 svg kódu. Především jsou pak problémy s vrstvami, které nejsou oříznuty ohraničením mapy.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Pokud potřebujete vektorový výstup z QGISu, doporučujeme vyzkoušet tisknutí do PostScriptu, pokud SVG výstup není uspokojující.</p>
- save template
- uložit šablonu
+ SVG Format
+ SVG formát
- Directory where to save SVG files
+ Složka, kam se uloží SVG soubory
+
+
+ SVG export error
+ Chyba SVG exportu
+
+
+ on page
+ na stránce
+
+
+ SVG error
+ Chyba SVG
+
+
+ There was an error in SVG output for SVG layer
+ V SVG výstupu pro SVG vrstvu došlo k chybě
+
+
+ copy
+ kopírovat
+
+
+ Duplicating composer...
+ Duplikuji Tvůce map...
+
+
+ Duplicate Composer
+ Duplikovat Tvůce map
+
+
+ Composer duplication failed.
+ Duplikace Tvůrce map selhala.
+
+
+ Save template
+ Uložit šablonu
+
+
+ Composer templates
+ Šablony tvůce map
+
+
+ Save error
Chyba ukládání
- Error, could not save file
Chyba, nemohu uložit soubor
- Load template
Načíst šablonu
- Read error
Chyba čtení
- Error, could not read file
Chybam nemohu přečíst soubor
- Content of template file is not valid
- Obsah šablony je neplatný
+ Composer error
+ Chyba Tvůrce map
+
+
+ Error, could not create new composer
+ Chyba, nemohu vytvořit nového Tvůrce map
+
+
+ Loading template into composer...
+ Načítám šablonu do Tvůrce map...
+
+
+ Project contains WMS layers
+ Projekt obsahuje vrstvy WMS
+
+
+ Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
+ Některé WMS servery (např. UMN mapserver) mají limity pro paramtery šířky a výšky. Tiskové plochy z takových serverů mohou tento limit překročit . V takovém případě nebude WMS vrstva vytištěna
+
+
+ Project contains composition effects
+ Projekt obsahuje kompoziční efekty
+
+
+ Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
+ Pokročilé kompoziční efekty jako režimy prolínání nebo průhlednost vektorových vrstev jsou v tomto projektu zapnuty. Tyto efekty nelze vytisknout jako vektor. Doporučujeme tisk jako rastr.
+
+
+ Print as raster
+ Tisknout jako rastr
+
+
+ Landscape
+ terén
QgsComposerArrowWidget
-
- General options
- Obecné možnosti
-
Arrow outline width
@@ -21958,10 +15886,6 @@ Please try a lower resolution or a smaller papersize
Arrowhead width
Šířka hlavy šipky
-
- Arrow color
- Barva šipky
-
Arrow color changed
@@ -21985,6 +15909,12 @@ Please try a lower resolution or a smaller papersize
Arrow start marker
Počáteční značka šipky
+
+ Arrow end marker
+ Koncová značka šipky
+
Start marker svg file
@@ -21995,12 +15925,6 @@ Please try a lower resolution or a smaller papersize
End marker svg file
Konečná značka SVG souboru
-
- Arrow end marker
- Koncová značka šipky
-
QgsComposerArrowWidgetBase
@@ -22014,35 +15938,6 @@ Please try a lower resolution or a smaller papersize
Arrow
Šipka
-
- Arrow color...
- Barva šipky...
-
-
- Line width
- Šířka čáry
-
-
- Arrow head width
- Šířka hlavy šipky
-
-
- Arrow markers
- Značky šipky
-
-
- Default marker
- Výchozí značka
-
-
- No marker
- Bez značek
-
-
- SVG markers
- SVG značky
-
Main properties
@@ -22069,6 +15964,11 @@ Please try a lower resolution or a smaller papersize
Color...
Barva...
+
+ Arrow markers
+ Značky šipky
+
Default
@@ -22106,121 +16006,41 @@ Please try a lower resolution or a smaller papersize
Center
- Na střed
+
Right
- Napravo
+
Left
- Nalevo
+
Attribute
- Atribut
+
Heading
-
Alignment
- Zarovnání
+
QgsComposerBase
-
- General
- Všeobecné
-
-
- Composition
- Kompozice
-
-
- Item
- Položka
-
-
- &Print...
- &Tisknout...
-
-
- Add new map
- Přidat novou mapu
-
-
- Add new label
- Přidat nový popisek
-
-
- Add new vect legend
- Přidat novou vektorovou legendu
-
-
- Select/Move item
- Vybrat/přemístit položku
-
-
- Add new scalebar
- Přidat nové grafické měřítko
-
-
- Refresh view
- Obnovit pohled
-
MainWindow
MainWindow
-
- Toolbar
- Panel nástrojů
-
-
- Zoom In
- Zvětšit
-
-
- Zoom Out
- Zmenšit
-
-
- Add Legend
- Přidat legendu
-
-
- Add new legend
- Přidat novou legendu
-
-
- Add Image
- Přidat obrázek
-
-
- Zoom Full
- Přiblížit na rozměry okna
-
Composer
@@ -22244,13 +16064,23 @@ Please try a lower resolution or a smaller papersize
Atlas
- Atlas
+
+
+ &Print...
+ &Tisknout...
Ctrl+P
Ctrl+P
+
+ Zoom Full
+ Přiblížit na rozměry okna
+
Zoom full
@@ -22259,7 +16089,12 @@ Please try a lower resolution or a smaller papersize
Ctrl+0
- Ctrl+0
+
+
+ Zoom In
+ Zvětšit
Ctrl++
- Ctrl++
+ Ctrl++
+
+
+ Zoom Out
+ Zmenšit
Ctrl+-
- Ctrl+-
+ Ctrl+-
Zoom to 100%
- Zvětšit na 100%
Ctrl+1
- Ctrl+1
Zoom
- Zvětšit
+ Zvětšit
Add Map
Přidat mapu
+
+ Add new map
+ Přidat novou mapu
+
Add Label
Přidat popisek
- Add Vector Legend
- Přidat vektorovou legendu
+ Add new label
+ Přidat nový popisek
+
+
+ Add Legend
+ Přidat legendu
+
+
+ Add new legend
+ Přidat novou legendu
Move Item
Přesunout položku
+
+ Select/Move item
+ Vybrat/přemístit položku
+
Export as Image...
@@ -22342,95 +16203,110 @@ Please try a lower resolution or a smaller papersize
Add Scalebar
Přidat grafické měřítko
+
+ Add new scalebar
+ Přidat nové grafické měřítko
+
Refresh
Obnovit
+
+ Refresh view
+ Obnovit pohled
+
Show Grid
- Zobrazit mřížku
Show grid
- Zobrazit mřížku
+ Zobrazit mřížku
Ctrl+'
- Ctrl+'
Snap to Grid
- Přichytit k mřížce
Snap to grid
- Přichytit k mřížce
+ Přichytit k mřížce
Ctrl+Shift+'
- Ctrl+Shift+'
Show Guides
- Zobrazit vodítka
Show guides
- Zobrazit vodítka
Ctrl+;
- Ctrl+;
Snap to Guides
- Přichytit k vodítkům
Snap to guides
- Přichytit k vodítkům
Ctrl+Shift+;
- Ctrl+Shift+;
Smart Guides
- Chytrá vodítka
Smart guides
- Chytrá vodítka
Ctrl+Alt+;
- Ctrl+Alt+;
Clear Guides
- Odstranit vodítka
Clear guides
- Odstranit vodítka
+
+
+ Add Image
+ Přidat obrázek
Ctrl+G
- Ctrl+G
+ Ctrl+G
Ctrl+Shift+G
- Ctrl+Shift+G
Ctrl+]
- Ctrl+]
Ctrl+[
- Ctrl+[
Ctrl+Shift+]
- Ctrl+Shift+]
Ctrl+Shift+[
- Ctrl+Shift+[
Save as Template
Uložit jako šablonu
+
+ Save as template
+ Uložit jako šablonu
+
Align Left
Zarovnat vlevo
+
+ Align selected items left
+ Zarovnat vybrané položky vlevo
+
Align Center
Zarovnat na střed
+
+ Align center horizontal
+ Zarovnat na střed vodorovně
+
Align Right
Zarovnat vpravo
+
+ Align selected items right
+ Zarovnat vybrané položky vpravo
+
Align Top
Zarovnat nahoru
+
+ Align selected items to top
+ Zarovnat vybrané položky nahoru
+
+
+ Align Center Vertical
+ Zarovnat na střed svisle
+
+
+ Align center vertical
+ Zarovnat na střed svisle
+
Align Bottom
Zarovnat dolů
+
+ Align selected items bottom
+ Zarovnat vybrané položky dolů
+
+
+ &Quit
+ &Zavřít
+
+
+ Quit
+ Zavřít
+
+
+ Ctrl+Q
+ Ctrl+Q
+
+
+ Add Arrow
+ Přidat šipku
+
+
+ Add arrow
+ Přidat šipku
+
+
+ Add Table
+ Přidat tabulku
+
+
+ Add attribute table
+ Přidat atributovou tabulku
+
+
+ Page Setup
+ Nastavení stránky
+
+
+ Page setup
+ Nastavení stránky
+
+
+ Ctrl+Shift+P
+ Ctrl+Shift+P
+
&Undo
- &Zpět
+ &Zpět
&Redo
- &Znovu
+ &Znovu
+
+
+ Ctrl+Shift+L
+ Ctrl+Shift+L
+
+
+ Pa&ste in Place
+ Vlo&žit v místě
+
+
+ Paste in place
+ Vložit v místě
+
+
+ Ctrl+Shift+V
+ Ctrl+Shift+V
+
+
+ &Delete
+ &Smazat
+
+
+ Delete selected items
+ Odstranit vybrané položky
+
+
+ Del
+ Del
+
+
+ De&select All
+ Zru&šit výběr všeho
+
+
+ Deselect all
+ Zrušit výběr všeho
+
+
+ Ctrl+Shift+A
+ Ctrl+Shift+A
+
+
+ Select &All
+ Vybrat &vše
+
+
+ Select all items
+ Vybrat všechny položky
+
+
+ Ctrl+A
+ Ctrl+A
+
+
+ &Invert Selection
+ &Převrátit výběr
+
+
+ Invert selection
+ Převrátit výběr
+
+
+ Select Next Item &Below
+
+
+ Select next item below
+
+
+ Ctrl+Alt+[
+ Ctrl+Alt+[
+
+
+ Select Next Item &Above
+
+
+ Select next item above
+
+
+ Ctrl+Alt+]
+ Ctrl+Alt+]
+
+
+ Pan Composer
+
+
+ Composer Options...
+ Možnosti Tvůrce mapy...
+
+
+ Show Rulers
+ Zobrazit pravítka
+
+
+ Show rulers
+ Zobrazit pravítka
+
+
+ Ctrl+R
+ Ctrl+R
+
+
+ First Feature
+ První prvek
+
+
+ Previous Feature
+ Předchozí prvek
+
+
+ Next Feature
+ Další prvek
+
+
+ Last Feature
+ Poslední prvek
+
+
+ Preview Atlas
+ Náhled Atlasu
+
+
+ Print Atlas...
+ Vytisknout Atlas...
+
+
+ Export Atlas as Images...
+ Exportovat Atlas jako obrázky...
+
+
+ Export Atlas as SVG...
+ Exportovat Atlas jako SVG...
+
+
+ Export Atlas as PDF...
+ Exportovat Atlas jako PDF...
+
+
+ Export Atlas as PDF
+ Exportovat Atlas jako PDF
+
+
+ Atlas Settings
+ Nastavení atlasu
+
+
+ Revert last change
+ Vrátit zpět poslední změny
+
+
+ Ctrl+Z
+ Ctrl+Z
+
+
+ Restore last change
+ Provést znovu poslední změnu
+
+
+ Ctrl+Shift+Z
+ Ctrl+Shift+Z
+
+
+ Add Rectangle
+ Přidat obdélník
+
+
+ Add rectangle
+ Přidat obdélník
+
+
+ Add Triangle
+ Přidat trojúhelník
+
+
+ Add triangle
+ Přidat trojúhelník
+
+
+ Add Ellipse
+ Přidat elipsu
Add HTML
Přidat HTML
+
+ Add html frame
+ Přidat HTML rám
+
Composer Manager
@@ -22660,391 +16861,22 @@ Please try a lower resolution or a smaller papersize
Lock Selected Items
- Zamknout vybrané položky
Ctrl+L
- Ctrl+L
+ Ctrl+L
Unlock All
- Odemknout vše
Unlock All Items
-
-
- Ctrl+Shift+L
- Ctrl+Shift+L
-
-
- Pa&ste in Place
-
-
- Paste in place
-
-
- Ctrl+Shift+V
- Ctrl+Shift+V
-
-
- &Delete
- &Smazat
-
-
- Delete selected items
-
-
- Del
-
-
- De&select All
-
-
- Deselect all
-
-
- Ctrl+Shift+A
- Ctrl+Shift+A
-
-
- Select &All
-
-
- Select all items
-
-
- Ctrl+A
- Ctrl+A
-
-
- &Invert Selection
-
-
- Invert selection
- Převrátit výběr
-
-
- Select Next Item &Below
-
-
- Select next item below
-
-
- Ctrl+Alt+[
-
-
- Select Next Item &Above
-
-
- Select next item above
-
-
- Ctrl+Alt+]
-
-
- Pan Composer
-
-
- Composer Options...
-
-
- Show Rulers
-
-
- Show rulers
-
-
- Ctrl+R
- Ctrl+R
-
-
- First Feature
-
-
- Previous Feature
-
-
- Next Feature
-
-
- Last Feature
-
-
- Preview Atlas
-
-
- Print Atlas...
-
-
- Export Atlas as Images...
-
-
- Export Atlas as SVG...
-
-
- Export Atlas as PDF...
-
-
- Export Atlas as PDF
-
-
- Atlas Settings
-
-
- Load From template
- Načíst ze šablony
-
-
- Save as template
- Uložit jako šablonu
-
-
- Align left
- Zarovnat vlevo
-
-
- Align selected items left
- Zarovnat vybrané položky vlevo
-
-
- Align center
- Zarovnat na střed
-
-
- Align center horizontal
- Zarovnat na střed vodorovně
-
-
- Align right
- Zarovnat vpravo
-
-
- Align selected items right
- Zarovnat vybrané položky vpravo
-
-
- Align top
- Zarovnat nahoru
-
-
- Align selected items to top
- Zarovnat vybrané položky nahoru
-
-
- Align Center Vertical
- Zarovnat na střed svisle
-
-
- Align center vertical
- Zarovnat na střed svisle
-
-
- Align bottom
- Zarovnat dolů
-
-
- Align selected items bottom
- Zarovnat vybrané položky dolů
-
-
- &Quit
- &Zavřít
-
-
- Quit
- Zavřít
-
-
- Ctrl+Q
- Ctrl+Q
-
-
- Add Arrow
- Přidat šipku
-
-
- Add Table
- Přidat tabulku
-
-
- Add attribute table
- Přidat atributovou tabulku
-
-
- Page setup
- Nastavení stránky
-
-
- Ctrl+Shift+P
- Ctrl+Shift+P
-
-
- Add Rectangle
- Přidat obdélník
-
-
- Add rectangle
- Přidat obdélník
-
-
- Add Triangle
- Přidat trojúhelník
-
-
- Add triangle
- Přidat trojúhelník
-
-
- Add Ellipse
- Přidat elipsu
-
-
- Add html frame
- Přidat HTML rám
-
-
- Add Basic Shape
- Přidat základní tvar
-
-
- Add arrow
- Přidat šipku
-
-
- Add table
- Přidat tabulku
-
-
- Adds attribute table
- Přidá atributovou tabulku
-
-
- Page Setup
- Nastavení stránky
-
-
- Undo
- Zpět
-
-
- Revert last change
- Vrátit zpět poslední změny
-
-
- Ctrl+Z
- Ctrl+Z
-
-
- Redo
- Znovu
-
-
- Restore last change
- Provést znovu poslední změnu
-
-
- Ctrl+Shift+Z
- Ctrl+Shift+Z
+ Odemknout všechny položky
@@ -23052,17 +16884,17 @@ Please try a lower resolution or a smaller papersize
Left
- Nalevo
+ Nalevo
Center
- Na střed
+ Na střed
Right
- Napravo
+ Napravo
@@ -23070,12 +16902,12 @@ Please try a lower resolution or a smaller papersize
Ascending
- Vzestupně
+ Vzestupně
Descending
- Sestupně
+ Sestupně
@@ -23100,15 +16932,6 @@ Please try a lower resolution or a smaller papersize
Repeat until finished
Opakovat dokud není hotovo
-
- Use smart breaks changed
-
-
- General options
- Obecné možnosti
-
Change html url
@@ -23124,23 +16947,14 @@ Please try a lower resolution or a smaller papersize
Change resize mode
Změnit režim změny velikosti
+
+ Use smart breaks changed
+
QgsComposerHtmlWidgetBase
-
- Form
- Formulář
-
-
- ...
- ...
-
-
- URL
- URL
-
HTML Frame
@@ -23157,9 +16971,14 @@ Please try a lower resolution or a smaller papersize
Hlavní vlastnosti
- Refresh HTML
- URL
+ URL
+
+
+ ...
+ ...
Add Frame
- Přidat rámec
Use smart page breaks
- Použít chytrá zalomení stránky
Maximum distance
- Maximální vzdálenost
mm
- mm
+ mm
-
-
- QgsComposerItem
- Change item position
- Změnit pozici položky
+ Refresh HTML
+ Obnovit HTML
QgsComposerItemWidget
- Frame color changed
Barva rámu změněna
- Background color changed
Barva pozadí změněna
- Item opacity changed
- Průhlednost položky změněna
-
-
- Item outline width
- Šířka obrysu položky
-
-
- Item frame toggled
- Rám položky přepnut
-
-
- Item position changed
Pozice položky změněna
- Item frame join style
- Item outline width
+ Šířka obrysu položky
- Item frame join style
+
+
+ Item frame toggled
+ Rám položky přepnut
+
+
+ Item background toggled
Pozadí položky přepnuto
- Select background color
Vybrat barvu pozadí
- Select frame color
Vybrat barvu rámu
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
ID položky změněno
- Item rotation changed
- Rotace položky změněna
QgsComposerItemWidgetBase
-
- Form
- Formulář
-
-
- Frame color...
- Barva rámu...
-
-
- Background color...
- Barva pozadí...
-
-
- Opacity
- Průhlednost
-
-
- Outline width
- Šířka obrysu
-
-
- Position and size...
- Umístění a velikost...
-
-
- Show frame
- Zobrazit rám
-
Global Options
Všeobecné možnosti
- Position and size
Umístění a velikost
- Reference point
Referenční bod
- X
X
- Y
Y
- Width
Šířka
- Height
Výška
- Page
-
- Rotation
- Rotace
+ Rotace
- °
- °
+
- ...
- ...
-
-
- Frame
Rám
- Thickness
- Tloušťka
-
-
- Color...
- Barva...
-
-
- mm
- mm
+
- Join style
- Styl spojů
+
- Background
- Pozadí
-
-
- Item ID
- ID položky
-
-
- Uuid (read-only)
- Uuid (jen pro čtení)
-
-
- Id
- Id
-
-
- Rendering
Vykreslování
- Blending mode
Režim míchání
- Thickness
+ Tloušťka
+
+
+ Color...
+ Barva...
+
+
+ Background
+ Pozadí
+
+
+ Transparency
Průhlednost
- Position...
- Pozice...
+ Item ID
+ ID položky
+
+
+ Id
+ Id
QgsComposerLabelWidget
-
- General options
- Obecné možnosti
-
Label text HTML state changed
@@ -23452,32 +17214,24 @@ Please try a lower resolution or a smaller papersize
Label color changed
- Barva popisku změněna
- Insert expression
Vložit výraz
- Label alignment changed
Zarovnání popisky změněno
-
- Label id changed
- ID popisky změněno
-
-
- Label rotation changed
- Rotace popisku změněna
-
QgsComposerLabelWidgetBase
@@ -23506,6 +17260,16 @@ Please try a lower resolution or a smaller papersize
Insert an expression
Vložit výraz
+
+ Font
+ Typ písma
+
+
+ Font color...
+ Barva písma...
+
Alignment
@@ -23516,6 +17280,36 @@ Please try a lower resolution or a smaller papersize
Vertical
Svisle
+
+ Top
+ Nahoru
+
+
+ Middle
+ Na střed
+
+
+ Bottom
+ Dolů
+
+
+ Left
+ Nalevo
+
+
+ Center
+ Na střed
+
+
+ Right
+ Napravo
+
Horizontal
@@ -23536,84 +17330,13 @@ Please try a lower resolution or a smaller papersize
mm
mm
-
- Rotation
- Rotace
-
-
- °
- °
-
-
- Font
- Typ písma
-
-
- Font color...
- Barva písma...
-
-
- Margin (mm)
- Okraj (mm)
-
-
- Horizontal Alignment:
- Vodorovné zarovnání:
-
-
- Left
- Nalevo
-
-
- Center
- Na střed
-
-
- Right
- Napravo
-
-
- Vertical Alignment:
- Svislé zarovnání:
-
-
- Top
- Nahoru
-
-
- Middle
- Na střed
-
-
- Bottom
- Dolů
-
-
- Margin
- Hranice
-
-
- mm
- mm
-
-
- Label id
- ID popisky
-
QgsComposerLegend
+ Legend
- Legenda
+ Legenda
@@ -23639,14 +17362,6 @@ Please try a lower resolution or a smaller papersize
QgsComposerLegendWidget
-
- Item Options
- Možnosti položky
-
-
- General Options
- Obecné možnosti
-
Item
@@ -23670,7 +17385,7 @@ Please try a lower resolution or a smaller papersize
Legend title alignment changed
- Zarovnání nadpisu legendy změněno
Wms Legend width
- Šířka Wms legendy
Wms Legend height
- Výška Wms legendy
Přidána skupiny legendy
- Map %1
Mapa %1
- None
Žádná
@@ -23799,12 +17514,19 @@ Please try a lower resolution or a smaller papersize
QgsComposerLegendWidgetBase
- Barscale Options
- Možnosti grafického měřítka
+ Legend Options
+ Možnosti legendy
- General
- Všeobecné
+ Legend
+ Legenda
+
+
+ Main properties
+ Hlavní vlastnosti
&Nadpis
- Title alignment:
- Map
+ Mapa
- Left
- Nalevo
+ Wrap text on
+ Zalamovat text na
- Center
- Na střed
+ Legend items
+ Položky legendy
- Right
- Napravo
-
-
- Update legend. User defined labels are preserved.
- Aktualizovat legendu. Uživatelem definované popisky jsou zachovány.
-
-
- Update item
- Aktualizovat položku
-
-
- Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
- Aktualizovat celou legendu. Vrstvy jsou přidány/odebrány podle hlavní legendy aplikace. Uživatelem definované popisky budou smazány.
-
-
- Update all
- Aktualizovat vše
-
-
- ...
- ...
+ Add group
+ Přidat skupinu
Show feature count for each class of vector layer.
Zobrazit počet prvků pro každou třídu vektorové vrstvy.
-
- Auto update
-
Fonts
Písma
- Title Font...
- Typ písma nadpisu...
+ Space above text using subgroup style.
+ Prostor nad textem využívajícím styl podskupiny.
- Subgroup Font...
- Typ písma podskupiny...
+ Subgroup space
+ Odsazení podskupiny
- Group Font...
- Typ písma skupiny...
+ Space above symbol and symbol label.
+ Prostor nad symbolem a popiskou symbolu.
- Title font...
-
-
- Subgroup font...
-
-
- Group font...
-
-
- Item font...
- Column space
+ Mezera mezi sloupci
Split layers
Rozdělit vrstvy
+
+ Spacing
+ Mezery
+
+
+ mm
+ mm
+
+
+ Title alignment:
+ Zarovnání nadpisu:
+
+
+ Left
+ Nalevo
+
+
+ Center
+ Na střed
+
+
+ Right
+ Napravo
+
+
+ Update legend. User defined labels are preserved.
+ Aktualizovat legendu. Uživatelem definované popisky jsou zachovány.
+
+
+ Update item
+ Aktualizovat položku
+
+
+ Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
+ Aktualizovat celou legendu. Vrstvy jsou přidány/odebrány podle hlavní legendy aplikace. Uživatelem definované popisky budou smazány.
+
+
+ Update all
+ Aktualizovat vše
+
+
+ ...
+ ...
+
+
+ Auto update
+ Automatická aktualizace
+
+
+ Title font...
+ Typ písma nadpisu...
+
+
+ Subgroup font...
+ Typ písma podskupiny...
+
+
+ Group font...
+ Typ písma skupiny...
+
+
+ Item font...
+ Typ písma položky...
+
Symbol
@@ -23951,22 +17721,17 @@ Please try a lower resolution or a smaller papersize
WMS LegendGraphic
- WMS LegendGraphic
Legend width
- Šířka legendy
Legend height
-
-
- Spacing
- Mezery
+ Výška legendy
Group Space
Odsazení skupiny
-
- Space above text using subgroup style.
- Prostor nad textem využívajícím styl podskupiny.
-
-
- Subgroup space
- Odsazení podskupiny
-
-
- Space above symbol and symbol label.
- Prostor nad symbolem a popiskou symbolu.
-
Symbol space
@@ -24013,11 +17763,6 @@ Please try a lower resolution or a smaller papersize
Box space
Vzdálenost od okraje
-
- Column space
- Mezera mezi sloupci
-
Title space
Místo u nadpisu
-
- mm
- mm
-
-
- Layer Font...
- Typ písma vrstvy...
-
-
- Item Font...
- Typ písma položky...
-
-
- Symbol width
- Šířka symbolu
-
-
- mm
- mm
-
-
- Symbol height
- Výška symbolu
-
-
- Layer space
- Mezery mezi vrstvami
-
-
- Symbol space
- Mezera mezi symboly
-
-
- Icon label space
- Mezera před popiskem ikony
-
-
- Box space
- Vzdálenost od okraje
-
-
- Map
- Mapa
-
-
- Group Space
- Odsazení skupiny
-
-
- Wrap text on
- Zalamovat text na
-
-
- Auto Update
- Automatická aktualizace
-
-
- v
- v
-
-
- ^
- ^
-
-
- X
- X
-
-
- Edit
- Upravit
-
-
- All
- Všechno
-
-
- Add group
- Přidat skupinu
-
-
- Legend Options
- Možnosti legendy
-
-
- Legend
- Legenda
-
-
- Main properties
- Hlavní vlastnosti
-
-
- Update
- Aktualizovat
-
-
- Legend items
- Položky legendy
-
QgsComposerManager
@@ -24267,14 +17894,6 @@ Please try a lower resolution or a smaller papersize
Composer duplication failed.
Duplikace Tvůrce map selhala.
-
- Change title
- Změnit nadpis
-
-
- Title
- Nadpis
-
QgsComposerManagerBase
@@ -24317,836 +17936,568 @@ Please try a lower resolution or a smaller papersize
QgsComposerMap
- Map %1
Mapa %1
- Map will be printed here
Zde bude vytištěna mapa
-
- Grid %1
-
QgsComposerMapWidget
- General options
- Obecné možnosti
-
-
- Cache
Vyrovnávací paměť
- Render
+ Vykreslování
+
+
+ Rectangle
Obdélník
- Solid
Plný
- Cross
Kříž
- Markers
-
-
- Decimal
Desetinný
- DegreeMinute
StupněMinuty
- DegreeMinuteSecond
StupněMinutySekundy
+ No frame
- Žádný rám
+ Žádný rám
- Zebra
Zebra
- Map scale changed
+ Měřítko mapy změněno
+
+
+ Map rotation changed
+ Rotace mapy změněna
+
+
+ Map extent changed
+ Rozsah mapy změněn
+
+
+ Select font color
Vybrat barvu písma
Select grid frame color
- Vybrat barvu rámu mřížky
Select grid frame fill color
- Vybrat barvu výplně rámu mřížky
- Overview frame style changed
-
-
- Overview centering mode changed
-
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Mapová jednotka
-
-
- Millimeter
- Milimetr
-
-
- Centimeter
-
-
- change...
- změnit...
-
-
- Grid line style changed
-
-
- Label font changed
- Typ písma popisky změněn
-
-
- Inside frame
- Uvnitř rámu
-
-
- Outside frame
- Vně rámu
-
-
- Horizontal
- Vodorovně
-
-
- Vertical
- Svisle
-
-
- Horizontal and Vertical
- vodorovně a svisle
-
-
- Boundary direction
- Směr hranice
-
-
- Change item width
- Změnit šířku položky
-
-
- Change item height
- Změnit výšku položky
-
-
- Map scale changed
- Měřítko mapy změněno
-
-
- Map rotation changed
- Rotace mapy změněna
-
-
- Map extent changed
- Rozsah mapy změněn
-
-
- Canvas items toggled
Položky mapy přepnuty
- None
Žádná
- Grid markers style changed
- Overview frame style changed
+ Změněn styl přehledového rámu
- Cross width changed
- Overview centering mode changed
+ Změněn režim vystředění přehledu
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Zaškrtávací pole mřížky přepnuto
- Grid interval changed
Interval mřížky změněn
- Grid offset changed
Odsazení mřížky změněno
- Grid pen changed
- Typ pera mřížky změněn
+ Grid line style changed
+ Změněn styl čáry mřížky
- Grid type changed
Typ mřížky změněn
+ Grid cross width changed
- Šířka křížení mřížky změněn
+ Šířka křížení mřížky změněn
- Annotation font changed
Typ písma anotace změněn
- Label font changed
+ Typ písma popisky změněn
+
+
+ Annotation distance changed
Vzdálenost anotace změněna
- Annotation format changed
Formát anotace změněn
- Changed grid frame style
- Změněn styl rámu mřížky
-
-
- Changed grid frame width
- Změněna šířka rámu mřížky
-
-
- Changed grid frame line thickness
-
-
- Grid frame color changed
-
-
- Grid frame first fill color changed
-
-
- Grid frame second fill color changed
-
-
- Disabled
- Vypnuto
-
-
- Annotation position changed
- Umístění anotace změněno
-
-
- Map %1
- Mapa %1
-
-
- Annotation toggled
Anotace přepnuta
- Changed annotation direction
- Změněn směr anotace
-
-
- Changed annotation precision
Změněna přesnost anotace
- Render
- Vykreslování
+ Changed grid frame style
+ Změněn styl rámu mřížky
+
+
+ Changed grid frame width
+ Změněna šířka rámu mřížky
+
+
+ Changed grid frame line thickness
+
+
+ Grid frame color changed
+ Barva rámu mřížky změněna
+
+
+ Grid frame first fill color changed
+
+
+ Grid frame second fill color changed
+
+
+ Inside frame
+ Uvnitř rámu
+
+
+ Outside frame
+ Vně rámu
+
+
+ Disabled
+ Vypnuto
+
+
+ Horizontal
+ Vodorovně
+
+
+ Vertical
+ Svisle
+
+
+ Annotation position changed
+ Umístění anotace změněno
+
+
+ Changed annotation direction
+ Změněn směr anotace
+
+
+ Map %1
+ Mapa %1
QgsComposerMapWidgetBase
-
- Map options
- Možnosti mapy
-
-
- Map
- Mapa
-
-
- Width
- Šířka
-
-
- Height
- Výška
-
-
- Scale
- Měřítko
-
-
- Rotation
- Rotace
-
-
- degrees
- stupně
-
-
- Draw map canvas items
- Vykreslit položky mapového okna
-
-
- Show grid
- Zobrazit mřížku
-
-
- Interval
- Interval
-
-
- X
- X
-
-
- ...
- ...
-
-
- °
- °
-
-
- View extent in map canvas
-
-
- Controlled by atlas
-
-
- Margin around feature
- Ohraničení kolem prvku
-
-
- %
- %
-
-
- Fixed scale
- Pevné měřítko
-
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
-
- Predefined scale (best fit)
-
-
- Y
- Y
-
-
- Offset
- Odsazení
-
-
- mm
- mm
-
-
- Line style
- Styl čáry
-
-
- change...
- změnit...
-
-
- Blend mode
- Režim mísení
-
-
- Grid frame
-
-
- Frame size
-
-
- Frame line thickness
-
-
- Color...
- Barva...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Typ mřížky
-
-
- CRS
- SRS
-
-
- Interval units
-
-
- Map unit
- Mapová jednotka
-
-
- Millimeter
- Milimetr
-
-
- Centimeter
-
-
- No frame
- Žádný rám
-
-
- Zebra
- Zebra
-
-
- Frame fill colors
-
-
- Draw coordinates
- Vykreslit souřadnice
-
-
- Format
- Formát
-
-
- Left
- Nalevo
-
-
- Right
- Napravo
-
-
- Top
- Nahoru
-
-
- Bottom
- Dolů
-
-
- Font
- Typ písma
-
-
- Font color
- Barva písma
-
-
- Font color...
- Barva písma...
-
-
- Marker style
- Styl symbolu
-
-
- Overview
- Náhled
-
-
- Overview frame
- Náhled rámu
-
-
- Overview style
- Styl náhledu
-
-
- Change...
- Změnit...
-
-
- Overview blending mode
- Režim mísení přehledu
-
-
- Invert overview
- Invertovat přehled
-
-
- Center on overview
-
-
- Extents
- Rozsahy
-
-
- X min
- X min
-
-
- Y min
- Y min
-
-
- Grid
- Mřížka
-
-
- Show grid?
- Zobrazi mřížku?
-
-
- Grid &type
- Typ &mřížky
-
-
- Interval X
- Interval X
-
-
- Offset X
- Odsazení X
-
-
- Line width
- Šířka čáry
-
-
- Annotation position
- Pozice anotací
-
-
- Annotation direction
- Směr anotací
-
-
- Line color
- Barva čáry
-
-
- Interval Y
- Interval Y
-
-
- Offset Y
- Odsazení Y
-
-
- Cross width
- Šířka kříže
-
-
- X max
- X max
-
Map Options
Možnosti mapy
- Map
+ Mapa
+
+
+ Main properties
Hlavní vlastnosti
- Update preview
+ Aktualizovat náhled
+
+
+ Scale
+ Měřítko
+
+
+ Map rotation
- Rotace mapy
- Y max
- Y max
+ Draw map canvas items
+ Vykreslit položky mapového okna
- Set to map canvas extent
- Nastavit na rozsah mapového okna
-
-
- Lock layers for map item
Zamnkout vrstvy pro položku mapy
- Extents
+ Rozsahy
+
+
+ X max
+ X max
+
+
+ Y min
+ Y min
+
+
+ Y max
+ Y max
+
+
+ Set to map canvas extent
+ Nastavit na rozsah mapového okna
+
+
+ X min
+ X min
+
+
+ View extent in map canvas
+ Zobrazit rozsah v mapovém okně
+
+
+ Controlled by atlas
+
+
+ Margin around feature
+
+
+ %
+
+
+ Fixed scale
+ Pevné měřítko
+
+
+ Use one of the predefined scales of the project where the atlas feature best fits.
+
+
+ Predefined scale (best fit)
+
+
+ Show grid
+ Zobrazit mřížku
+
+
+ Grid &type
+ Typ &mřížky
+
+
+ Offset
+ Odsazení
+
+
+ mm
+
+
+ Blend mode
+ Režim mísení
+
+
+ Interval
+ Interval
+
+
+ Grid frame
+ Rám mřížky
+
+
+ Frame size
+ Velikost rámu
+
+
+ Frame line thickness
+
+
+ Color...
+ Barva...
+
+
+ Frame fill colors
+
+
+ Overview blending mode
+ Režim mísení přehledu
+
+
+ Invert overview
+ Invertovat přehled
+
+
+ Center on overview
+
+
+ X
+ X
+
+
+ °
+
+
+ Y
+ Y
+
+
+ Cross width
+ Šířka kříže
+
+
+ Frame style
Styl rámu
- Frame width
- Šířka rámu
+ Line style
+ Styl čáry
- Draw annotation
- Nakreslit anotaci
+ change...
+ změnit...
- Draw coordinates
+ Vykreslit souřadnice
+
+
+ Format
+ Formát
+
+
+ Left
+ Nalevo
+
+
+ Right
+ Napravo
+
+
+ Top
+ Nahoru
+
+
+ Bottom
+ Dolů
+
+
+ Font
+ Typ písma
+
+
+ Font...
Typ písma...
- Distance to map frame
Vzdálenost k mapovému rámu
- Coordinate precision
Přesnost souřadnic
- Map extent
- Rozsah mapy
+ Font color...
+ Barva písma...
- Preview
- Náhled
+ Overview
+ Náhled
- Update preview
- Aktualizovat náhled
+ Overview frame
+ Náhled rámu
+
+
+ Overview style
+ Styl náhledu
+
+
+ Change...
+ Změnit...
@@ -25154,59 +18505,55 @@ Please try a lower resolution or a smaller papersize
Change item position
- Změnit pozici položky
+ Změnit pozici položky
Change item size
- Změnit velikost položky
%1 items selected
- %1 položek vybráno
1 item selected
- 1 položka vybrána
dx: %1 mm dy: %2 mm
- dx: %1 mm dy: %2 mm
width: %1 mm height: %2 mm
- šířka: %1 mm výška: %2 mm
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
- Tvorba mapy
+ Tvůrce mapy
- Picture expression eval error: %1
-
QgsComposerPictureWidget
-
- General options
- Obecné možnosti
-
Select svg or image file
@@ -25215,72 +18562,64 @@ Please try a lower resolution or a smaller papersize
Picture changed
Obrázek změněn
- Picture width changed
- Šířka obrázku změněna
-
-
- Picture height changed
- Výška obrázku změněna
-
-
- Expression based image path
-
- Picture rotation changed
Rotace obrázku změněna
- Select new preview directory
Vyberte novou složku náhledů
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
Přepnuta synchronizace rotace
- Rotation map changed
Rotace mapy změněna
- Map %1
Mapa %1
- Creating icon for file %1
Vytvářím ikonu pro soubor %1
@@ -25292,18 +18631,6 @@ Please try a lower resolution or a smaller papersize
Picture Options
Možnosti obrázku
-
- Picture options
- Možnosti obrázku
-
-
- Preloaded images
- Přednačtené obrázky
-
-
- Load another
- Načíst jiný
-
Picture
@@ -25314,100 +18641,106 @@ Please try a lower resolution or a smaller papersize
Main properties
Hlavní vlastnosti
+
+ Image source
+
Path
Cesta
- Image source
-
-
- Placement
- Umístění
-
-
- Resize mode
- Režim změny velikosti
-
-
- Zoom
- Zvětšit
-
-
- Stretch
-
-
- Clip
- Oříznout
-
-
- Zoom and resize frame
-
-
- Resize frame to image size
- ...
+ ...
Expression
- Výraz
+
+
+ Resize mode
+
+
+ Placement
+
+
+ Zoom
+
+
+ Stretch
+
+
+ Clip
+
+
+ Zoom and resize frame
+
+
+ Resize frame to image size
+
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
- Na střed
+
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Image search paths
-
-
- Image rotation
-
-
- Loading SVG previews...
- Načítám náhledy SVG...
-
-
- Add...
- Přidat...
-
-
- °
- °
+ Vyhledávací cesty obrázků
Odebrat
- Preview
- Náhled
+ Add...
+ Přidat...
- Options
- Možnosti
-
-
- Load
- Načíst
-
-
- ...
- ...
-
-
- Width
- Šířka
-
-
- Height
- Výška
-
-
- Rotation
- Rotace
+ Image rotation
+ Rotace obrázku
Sync with map
Synchronizovat s mapou
-
- Sync from map
- Synchronizovat s mapou
+
+ °
+ °
QgsComposerScaleBar
- units
- jednotky
- km
km
- m
m
- miles
- míle
+ míle
- ft
- stop
- Nm
- Nm
QgsComposerScaleBarWidget
-
- General options
- Obecné možnosti
-
Single Box
Jednoduchý rámeček
Double Box
Dvojitý rámeček
Line Ticks Middle
Značky čáry na střed
Line Ticks Down
Značky čáry dolů
Line Ticks Up
Značky čáry nahoru
Numeric
Číselný
@@ -25597,157 +18888,124 @@ Please try a lower resolution or a smaller papersize
Nautical Miles
- Námořní Míle
- Select fill color
- Vybrat barvu výplně
-
-
- Select alternate fill color
-
-
- Select font color
- Vybrat barvu písma
-
-
- Select stroke color
-
-
- Map %1
Mapa %1
- Scalebar map changed
Měřítko mapy změněno
- Scalebar line width
Šířka čáry měřítka
- Scalebar segment size
Velikost segmentu měřítka
- Scalebar segments left
Levých segmentů měřítka
- Number of scalebar segments changed
Počet segmentů měřítka změněn
- Scalebar secondary color changed
-
-
- Scalebar changed to map units
-
-
- Scalebar changed to feet
-
-
- Scalebar changed to nautical miles
-
-
- Scalebar changed to meters
-
-
- Scalebar line join style
-
-
- Scalebar line cap style
-
-
- Scalebar n segments
- Měřítko n segmentů
-
-
- Scalebar height changed
Výška měřítka změněna
- Scalebar font changed
Typ písma měřítka změněn
- Scalebar font color changed
Barva písma měřítka změněna
- Scalebar color changed
Barva měřítka změněna
- Scalebar stroke color changed
Barva čáry měřítka změněna
- Scalebar unit text
Text jednotky měřítka
- Scalebar map units per segment
Mapových jednotek na segment měřítka
- Scalebar style changed
Styl měřítka změněn
- Scalebar label bar space
Odsazení popisek měříka
- Scalebar box content space
Odsazení rámce obsahu měřítka
- Scalebar alignment
Zarovnání měřítka
- Scalebar unit changed
- Jednotka měřítka změněna
+ Scalebar changed to map units
+ Měřítko změněno na mapové jednotky
+
+
+ Scalebar changed to feet
+ Měřítko změněno na stopy
+
+
+ Scalebar changed to nautical miles
+ Měřítko změněno na námořní míle
+
+
+ Scalebar changed to meters
+ Měřítko změněno na metry
+
+
+ Scalebar line join style
+
+
+ Scalebar line cap style
+
@@ -25758,25 +19016,24 @@ Please try a lower resolution or a smaller papersize
Možnosti grafického měřítka
- Scale bar
- Ukazatel měřítka
+ Scalebar
+ Měřítko
- Segment size (map units)
- Velikost segmentu (mapové jednotky)
+ Main properties
+ Hlavní vlastnosti
- Map units per bar unit
- Mapové jednotky na jednotku měřítka
+ Map
+ Mapa
- Right segments
- Pravé segmenty
-
-
- Left segments
- Levé segmenty
+ Style
+ Styl
Label
Popisek
+
+ Map units per bar unit
+ Mapové jednotky na jednotku měřítka
+
Join style
- Styl spojů
+
Cap style
- Styl konců
+
+
+ Alignment
+ Zarovnání
Fonts and colors
Typ písma a barvy
+
+ Font...
+ Písmo...
+
Font color...
@@ -25874,140 +19146,49 @@ Please try a lower resolution or a smaller papersize
Secondary fill color...
-
-
- Stroke color...
Barva čáry...
-
- Height
- Výška
-
-
- Line width
- Šířka čáry
-
-
- Label space
- Vzdálenost pod popiskem
-
-
- Box space
- Vzdálenost od okraje
-
-
- Alignment
- Zarovnání
-
-
- Style
- Styl
-
-
- Scalebar
- Měřítko
-
-
- Main properties
- Hlavní vlastnosti
-
-
- Map
- Mapa
-
-
- Unit label
- Popisek jednotky
-
-
- Font...
- Písmo...
-
-
- Color...
- Barva...
-
QgsComposerShapeWidget
-
- General options
- Obecné možnosti
-
Ellipse
Elipsa
Rectangle
Obdélník
Triangle
Trojúhelník
- Shape style changed
-
- Shape radius changed
- Poloměr prvku změněn
- Shape rotation changed
- Rotace prvku změněna
-
-
- Shape type changed
Typ prvku změněn
-
- Select outline color
- Vybrat barvu ohraničení
-
-
- Shape outline color
- Barva ohraničení prvku
-
-
- Shape outline width
- Šířka ohraničení prvku
-
-
- Shape transparency toggled
- Průhlednost prvku přepnuta
-
-
- Select fill color
- Vybrat barvu výplně
-
-
- Shape fill color
- Barva výplně prvku
-
QgsComposerShapeWidgetBase
@@ -26029,52 +19210,22 @@ Please try a lower resolution or a smaller papersize
Corner radius
-
mm
- mm
+ mm
Style
- Styl
+ Styl
Change...
- Změnit...
-
-
- Rotation
- Rotace
-
-
- °
- °
-
-
- Shape outline color...
- Barva hraničení objektů...
-
-
- Outline width
- Šířka ohraničení
-
-
- Transparent fill
- Průhledná výplň
-
-
- Shape fill Color...
- Barva výplně objektů...
-
-
- Rotation
- Rotation
- Rotation
- Rotace
+ Změnit...
@@ -26082,30 +19233,26 @@ Please try a lower resolution or a smaller papersize
Descending
- Sestupně
+
Ascending
- Vzestupně
+
Attribute
- Atribut
+
Sort Order
-
QgsComposerTableWidget
-
- General options
- Obecné možnosti
-
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
- Filtr založený na výrazu
+
Table header alignment changed
-
QgsComposerTableWidgetBase
-
- Form
- Formulář
-
-
- Table
- Tabulka
-
-
- Layer
- Vrstva
-
-
- Attributes...
- Atributy...
-
-
- Show only visible features
- Zobrazit pouze viditelné prvky
-
-
- Composer map
- Tvorba map
-
Attribute Table
@@ -26244,19 +19363,19 @@ Please try a lower resolution or a smaller papersize
Hlavní vlastnosti
- Refresh table data
- Layer
+ Vrstva
- Filter with
- Filtrovat s
+ Attributes...
+ Atributy...
- ...
- ...
+ Composer map
+ Tvorba map
Margin
Okraj
+
+ Show only visible features
+ Zobrazit pouze viditelné prvky
+
+
+ Refresh table data
+ Aktualizovat data tabulky
+
+
+ Filter with
+ Filtrovat s
+
+
+ ...
+
mm
- mm
+
Header font...
- Typ písma nadpisu...
Content font...
- Typ písma obsahu...
Header alignment
-
Follow column alignment
-
Left
- Nalevo
+
Center
- Na střed
+
Right
- Napravo
-
-
- Grid stroke width
- Šířká čáry mřížky
-
-
- Grid color
- Barva mřížky
-
-
- Header Font...
- Typ písma nadpisu...
-
-
- Content Font...
- Typ písma obsahu...
+
@@ -26354,9 +19477,9 @@ Please try a lower resolution or a smaller papersize
Možnosti vektorové legendy
- Title
- Titulek
+ Preview
+ Náhled
Mapa
- Font
- Písmo
-
-
- Preview
- Náhled
-
-
- Box
- Box
+ Title
+ Titulek
ID
ID
+
+ Box
+ Box
+
+
+ Font
+ Písmo
+
QgsComposerView
- Quantum GIS
- Quantum GIS
-
-
- Move item content
- Posunout obsah položky
-
-
- Remove item group
- Odstranit skupinu položek
-
-
- Item deleted
- Položka smazána
-
-
- Zoom item content
- Přiblížit na obsah položky
-
-
- Arrow added
- Šipka přidána
+ QGIS
+ QGIS
Label added
Popiska přidána
-
- Map added
- Mapa přidána
-
Scale bar added
Měřítko přidáno
-
- QGIS
- QGIS
-
Legend added
@@ -26453,11 +19544,31 @@ Please try a lower resolution or a smaller papersize
Picture added
Obrázek přidán
+
+ Table added
+ Tabulka přidána
+
Shape added
Objekt přidán
+
+ Move item content
+ Posunout obsah položky
+
+
+ Arrow added
+ Šipka přidána
+
+
+ Map added
+ Mapa přidána
+
Html item added
@@ -26477,123 +19588,115 @@ Please try a lower resolution or a smaller papersize
Položka přesunuta
- Table added
- Tabulka přidána
+ Zoom item content
+ Přiblížit na obsah položky
QgsComposition
- Label added
Popiska přidána
- Map added
Mapa přidána
- Arrow added
Šipka přidána
- Scale bar added
Měřítko přidáno
- Shape added
Objekt přidán
- Picture added
Obrázek přidán
- Legend added
Legenda přidána
- Table added
Tabulka přidána
- Aligned items left
Položky zarovnány vlevo
- Aligned items horizontal center
Položky zarovnány vodorovně na střed
- Aligned items vertical center
Položky zarovnány svisle na střed
- Aligned items hcenter
- Položky zarovnány vodorovně na střed
-
-
- Aligned items right
Položky zarovnány vpravo
- Aligned items top
Položky zarovnány nahoru
- Aligned items vcenter
- Položky zarovnány svisle na střed
-
-
- Aligned items bottom
Položky zarovnány dolů
- Items locked
- Položky zamčeny
- Items unlocked
- Položky odemčeny
- Item z-order changed
Pořadí vrstev položek (osa Z) změněno
- Remove item group
Odstranit skupinu položek
- Frame deleted
Rám smazán
- Item deleted
Položka smazána
- Multiframe removed
Multirám odstraněn
@@ -26638,76 +19741,6 @@ Please try a lower resolution or a smaller papersize
QgsCompositionWidget
-
- Landscape
- terén
-
-
- Portrait
- Portrét
-
-
- ANSI A (Letter; 8.5x11 inches)
- ANSI A (Letter; 8.5x11 palců)
-
-
- ANSI B (Tabloid; 11x17 inches)
- ANSI B (Tabloid; 11x17 palců)
-
-
- ANSI C (17x22 inches)
- ANSI C (17x22 palců)
-
-
- ANSI D (22x34 inches)
- ANSI D (22x34 palců)
-
-
- ANSI E (34x44 inches)
- ANSI E (34x44 palců)
-
-
- Arch A (9x12 inches)
- Arch A (9x12 palců)
-
-
- Arch B (12x18 inches)
- Arch B (12x18 palců)
-
-
- Arch C (18x24 inches)
- Arch C (18x24 palců)
-
-
- Arch D (24x36 inches)
- Arch D (24x36 palců)
-
-
- Arch E (36x48 inches)
- Arch E (36x48 palců)
-
-
- Arch E1 (30x42 inches)
- Arch E1 (30x42 palců)
-
-
- Custom
- Vlastní
-
-
- A5 (148x210 mm)
- A5 (148x210 mm)
-
mm
@@ -26718,146 +19751,152 @@ Please try a lower resolution or a smaller papersize
inch
palce
+
+ Landscape
+ terén
+
+
+ Portrait
+ Portrét
+
Map %1
- Mapa %1
+ Mapa %1
- Select grid color
- Vybrat barvu mřížky
+ A5 (148x210 mm)
+ A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 palců)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 palců)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 palců)
- ANSI C (17x22 in)
ANSI C (17x22 palců)
- ANSI D (22x34 in)
ANSI D (22x34 palců)
- ANSI E (34x44 in)
ANSI E (34x44 palců)
- Arch A (9x12 in)
Arch A (9x12 palců)
- Arch B (12x18 in)
Arch B (12x18 palců)
- Arch C (18x24 in)
Arch C (18x24 palců)
- Arch D (24x36 in)
Arch D (24x36 palců)
- Arch E (36x48 in)
Arch E (36x48 palců)
- Arch E1 (30x42 in)
Arch E1 (30x42 palců)
- Legal (8.5x14 inches)
- Legal (8.5x14 palců)
-
-
- Solid
- Plný
-
-
- Dots
- Tečky
-
-
- Crosses
- Kříže
+ Custom
+ Vlastní
@@ -26867,218 +19906,165 @@ Please try a lower resolution or a smaller papersize
Composition
Kompozice
-
- Presets
- Předvolby
-
-
- ...
- ...
-
-
- Width
- Šířka
-
-
- Height
- Výška
-
-
- Orientation
- Orientace
-
-
- Guides and Grid
-
-
- Grid spacing
-
-
- Snap tolerance
- Tolerance uchopení
-
-
- px
- px
-
-
- Resolution
- Rozlišení
-
-
- Export resolution
- Rozlišení exportu
-
-
- World file on
-
-
- Change...
- Změnit...
-
-
- Page background
-
-
- Grid
- Mřížka
-
-
- Spacing
- Mezery
-
-
- mm
- mm
-
-
- Grid offset
- Odsazení mřížky
-
-
- x:
- x:
-
-
- y:
- y:
-
-
- Pen width
- Šířka pera
-
-
- Selection tolerance
- Tolerance výběru
-
-
- Color...
- Barva...
-
-
- Snap to alignments
- Přichytávat k zarovnání
-
-
- Tolerance
- Tolerance
-
-
- Units
- Jednotky
-
Paper and quality
Papír a kvalita
- Size
- Velikost
+ Presets
+ Předvolby
- dpi
- dpi
+ Width
+ Šířka
- Quality
- Kvalita
+ Height
+ Výška
- Width
- Šířka
+ Units
+ Jednotky
- Height
- Výška
-
-
- Number of pages
Počet stran
- Spacing
- Mezery
+ Orientation
+ Orientace
- X offset
- X odsazení
+ Export resolution
+ Rozlišení exportu
- Y offset
- Y odsazení
-
-
- Pen width
- Šířka pera
-
-
- Grid color
- Barva mřížky
-
-
- Grid style
- Styl mřížky
-
-
- Selection tolerance (mm)
- Tolerance výběru (mm)
-
-
- Snapping
- Přichytávání
-
-
- Snap to grid
- Přichytit k mřížce
-
-
- Print as raster
Tisknout jako rastr
+
+ Change...
+ Změnit...
+
+
+ Page background
+ Pozadí stránky
+
+
+ Grid
+ Mřížka
+
+
+ dpi
+ dpi
+
+
+ World file on
+ World file zapnuto
+
+
+ mm
+ mm
+
+
+ Grid offset
+ Odsazení mřížky
+
+
+ x:
+ x:
+
+
+ y:
+ y:
+
+
+ Spacing
+ Mezery
+
+
+ Snap to alignments
+ Přichytávat k zarovnání
+
+
+ Tolerance
+ Tolerance
+
QgsConfigureShortcutsDialog
+
+ Configure shortcuts
+ Nastavit zástupce
+
+
+ Action
+ Akce
+
+
+ Shortcut
+ Zástupce
+
+
+ Change
+ Změnit
+
+
+ Set none
+ Nastavit nic
+
+
+ Set default
+ Nastavit výchozí
+
+
+ Load...
+ Načíst...
+
+
+ Save...
+ Uložit...
+
Save shortcuts
Uložit zástupce
-
- XML file (*.xml);; All files (*)
- XML soubor (*.xml);; Všechny soubory (*)
-
Input:
Vstup:
-
- Change
- Změnit
-
Shortcut conflict
@@ -27171,53 +20151,18 @@ Please try a lower resolution or a smaller papersize
This shortcut is already assigned to action %1. Reassign?
Tento zástupce je již přiřazen akci %1. Změnit přiřazení?
-
- Configure shortcuts
- Nastavit zástupce
-
-
- Action
- Akce
-
-
- Shortcut
- Zástupce
-
-
- Set none
- Nastavit nic
-
-
- Set default
- Nastavit výchozí
-
-
- Load...
- Načíst...
-
-
- Save...
- Uložit...
-
QgsContextHelp
Error starting help viewer [%1]
- Chyba při spouštění prohlížeče nápovědy [%1]
Context help
- Kontextová nápověda
<h3>Oops! QGIS nemůže najít nápovědu pro tento formulář.</h3>Soubor nápovědy pro %1 nebyl nalezen ve vašem jazyce.<br>Pokud byste ho chtěli vytvořit, kontaktujte prosím vývojářský tým QGISu
-
- QgsContinuousColorDialogBase
-
- Continuous color
- Spojitá barva
-
-
- Maximum value
- Maximální hodnota
-
-
- Outline width
- Šířka obrysu
-
-
- Minimum value
- Minimální hodnota
-
-
- Classification field
- Pole klasifikace
-
-
- Draw polygon outline
- Vykreslení obvodu polygonu
-
-
QgsCoordinateTransform
- The source spatial reference system (CRS) is not valid.
- Zdrojový prostorvý referenční systém (CRS) není platný.
+ The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
+ Zdrojový souřadnicový referenční systém (SRS) je neplatný. Nelze změnit projekci souřadnic. SRS je: %1
CRS
SRS
-
- The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
- Zdrojový souřadnicový referenční systém (SRS) je neplatný. Nelze změnit projekci souřadnic. SRS je: %1
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
@@ -27293,118 +20207,6 @@ Error: %5
%2PROJ.4: %3 +to %4
Chyba: %5
-
- %1 of
-%2
-failed with error: %3
-
- %1 z
-%2
-selhalo s chybou: %3
-
-
-
- The destination spatial reference system (CRS) is not valid.
- Cílový prostorový referenční systém není platný.
-
-
- The coordinates can not be reprojected. The CRS is: %1
- Nelze změnit projekci souřadnic. SRS je: %1
-
-
-
- QgsCopyrightLabelPlugin
-
- Bottom Left
- Vlevo dole
-
-
- Top Left
- Vlevo nahoře
-
-
- Top Right
- Vpravo nahoře
-
-
- &Decorations
- &Dekorace
-
-
- Creates a copyright label that is displayed on the map canvas.
- Vytvoří štítek copyrightu, který bude zobrazen na mapovém platně.
-
-
- Bottom Right
- Vpravo dole
-
-
- &Copyright Label
- &Značka copyrightu
-
-
-
- QgsCopyrightLabelPluginGuiBase
-
- Copyright Label Plugin
- Zásuvný modul na tvorbu copyrightu
-
-
- &Enter your copyright label here:
- &Zadejte váš copyright zde:
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana';">© QGIS 2009</span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana';">© QGIS 2010</span></p></body></html>
-
-
- &Placement
- &Umístění
-
-
- Bottom Left
- Vlevo dole
-
-
- Top Left
- Vlevo nahoře
-
-
- Bottom Right
- Vpravo dole
-
-
- Top Right
- Vpravo nahoře
-
-
- &Orientation
- &Orientace
-
-
- &Color
- &Barva
-
-
- Horizontal
- Vodorovně
-
-
- Vertical
- Svisle
-
-
- Enable copyright label
- Zapnouz načku copyrightu
-
QgsCptCityBrowserModel
@@ -27426,6 +20228,11 @@ p, li { white-space: pre-wrap; }
colors
barvy
+
+ discrete
+ nespojitý
+
continuous
@@ -27436,11 +20243,6 @@ p, li { white-space: pre-wrap; }
continuous (multi)
spojitý (multi)
-
- discrete
- nespojitý
-
variants
@@ -27597,40 +20399,11 @@ a aktuální soubor je [%3]
Control rendering order
- Ovládání pořadí vykreslování
+
QgsCustomProjectionDialog
-
- Delete Projection Definition?
- Vymazat definici zobrazení?
-
-
- Deleting a projection definition is not reversable. Do you want to delete it?
- Odstranění definice zobrazení není vratné. Chcete ji vymazat?
-
-
- %1 of %2
- %1 z %2
-
-
- Abort
- Přerušit
-
-
- New
- Nové
-
-
- * of %1
- * z %1
-
-
- new CRS
- nový CRS
-
QGIS Custom Projection
QGIS uživatelské zobrazení
-
- The proj4 definition of '%1' is not valid.
- Proj4 definice pro '%1' je neplatná.
-
This proj4 projection definition is not valid.
Definice zobrazení pro proj4 není platná.
+
+ new CRS
+ nový CRS
+
+
+ The proj4 definition of '%1' is not valid.
+ Proj4 definice pro '%1' je neplatná.
+
Northing and Easthing must be in decimal form.
@@ -27665,45 +20443,13 @@ a aktuální soubor je [%3]
Error
Chyba
-
- Please give the projection a name before pressing save.
- Prosím zadejte název projekce před stiskem Uložit.
-
-
- Please add the parameters before pressing save.
- Prosím přidejte parametry před stiskem Uložit.
-
-
- Please add a proj= clause before pressing save.
- Přidejte prosím proj= klauzuli před stisknutím Uložit.
-
-
- This proj4 ellipsoid definition is not valid. Please add a ellips= clause before pressing save.
- COMMENTED OUT
- Definice zobrazení pro proj4 není platná. Prosím, přidejte parametr ellips= před samotným uložením.
-
-
- Please correct before pressing save.
- Opravte prosím před stiskem Uložit.
-
QgsCustomProjectionDialogBase
- |<
- |<
-
-
- <
- <
-
-
- 1 of 1
- 1 z 1
-
-
- >
- >
+ Custom Coordinate Reference System Definition
+ Vlastní definice souřadnicového refernčního systému
Definovat
- Test
- Test
+ ID
+ ID
- Calculate
- Vypočítat
-
-
- Geographic / WGS84
- Zeměpisný / WGS84
+ You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
+ Zde můžete definovat Váš vlastní souřadnicový referenční systém (CRS). Definice musí být vytvořena ve formátu proj4 pro specifikaci CRS.
Parametry
- *
- *
+ Test
+ Test
- S
- S
+ Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
+ Použijte níže položená textová pole k testování defince SRS, kterou jste vytvořili. Vložte souřadnice délka/šířka a transforomované výsledky, které jsou již známé (např. odečtením z mapy). Potom stiskněte tlačítko výpočtu, abyste zjistili, jestli je Vaše definice SRS správná.
- X
- X
+ Geographic / WGS84
+ Zeměpisný / WGS84
+
+
+ Destination CRS
+ Cílový SRS
East
Východ
-
- Custom Coordinate Reference System Definition
- Vlastní definice souřadnicového refernčního systému
-
-
- ID
- ID
-
-
- You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
- Zde můžete definovat Váš vlastní souřadnicový referenční systém (CRS). Definice musí být vytvořena ve formátu proj4 pro specifikaci CRS.
-
Name:
@@ -27800,14 +20534,9 @@ a aktuální soubor je [%3]
Odebrat
- Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
- Použijte níže položená textová pole k testování defince SRS, kterou jste vytvořili. Vložte souřadnice délka/šířka a transforomované výsledky, které jsou již známé (např. odečtením z mapy). Potom stiskněte tlačítko výpočtu, abyste zjistili, jestli je Vaše definice SRS správná.
-
-
- Destination CRS
- Cílový SRS
+ Calculate
+ Vypočítat
@@ -27839,10 +20568,6 @@ a aktuální soubor je [%3]
Customization files (*.ini)
Soubory pro přizpůsobení (*.ini)
-
- Widgets
- Widgety
-
QgsCustomizationDialogBase
@@ -28090,11 +20815,7 @@ a aktuální soubor je [%3]
<b>Current definition %1:</b><br>%2
-
-
- <b>Current definition%1:</b><br>%2
- <b>Aktuální definice%1:</b><br>%2
+ <b>Aktuální definice %1:</b><br>%2
Data defined properties
Daty definované vlastnosti
-
- New Row
- Nový řádek
-
Property
Vlastnost
-
- Field
- Pole
-
Expression
@@ -28210,22 +20923,22 @@ a aktuální soubor je [%3]
'linear'|'radial'|'conical'
- 'lineární'|'radiální'|'kónický'
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -28233,68 +20946,68 @@ a aktuální soubor je [%3]
Form
- Formulář
+
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
- výchozí
+
custom
-
preview
-
@@ -28302,13 +21015,13 @@ a aktuální soubor je [%3]
File '%1' not found in directory '%2'
-
unknown
- neznámé
+
@@ -28316,50 +21029,46 @@ a aktuální soubor je [%3]
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
- Zapamatovat si výběr
Hide deprecated
- Skrýt neschválené
Destination CRS
-
Source CRS
-
Layer
- Vrstva
+
QgsDbSourceSelectBase
-
- Add PostGIS Table(s)
- Přidat tabulku(y) PostGIS
-
Add PostGIS layers
@@ -28414,7 +21123,7 @@ a aktuální soubor je [%3]
Hold dialog open
- Podržet dialog otevřený
Hledat ve sloupcích
-
- QgsDbTableModel
-
- Schema
- Schéma
-
-
- Table
- Tabulka
-
-
- Type
- Typ
-
-
- Geometry column
- Sloupec s geometrií
-
-
- Primary key column
- Sloupec primárního klíče
-
-
- Sql
- Sql
-
-
- Point
- Bod
-
-
- Multipoint
- Multibod
-
-
- Line
- Linie
-
-
- Multiline
- Multilinie
-
-
- Polygon
- Polygon
-
-
- Multipolygon
- Multipolygon
-
-
QgsDecorationCopyright
@@ -28528,24 +21186,12 @@ a aktuální soubor je [%3]
&Enter your copyright label here:
&Zadejte váš copyright zde:
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana';">© QGIS 2009</span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana';">© QGIS 2009</span></p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28598,10 +21244,6 @@ p, li { white-space: pre-wrap; }
Color
Barva
-
- &Color
- &Barva
-
QgsDecorationGrid
@@ -28636,14 +21278,10 @@ p, li { white-space: pre-wrap; }
QgsDecorationGridDialog
-
- Dialog
- Dialog
-
Grid properties
-
Vertical
Svisle
-
- Horizontal and vertical
- Vodorovně a svisle
-
Boundary direction
@@ -29026,10 +21660,6 @@ p, li { white-space: pre-wrap; }
Color of bar
Barva grafického měřítka
-
- Click to select the color
- Klikněte pro výběr barvy
-
Size of bar
@@ -29069,264 +21699,17 @@ p, li { white-space: pre-wrap; }
Vymazat atributy
-
- QgsDelimitedTextPlugin
-
- &Delimited text
- &Oddělený text
-
-
- &Add Delimited Text Layer
- &Přidat vrstvu s odděleným textem
-
-
- DelimitedTextLayer
- Vrstva s odděleným textem
-
-
- Add a delimited text file as a map layer. The file must have a header row containing the field names. The file must either contain X and Y fields with coordinates in decimal units or a WKT field.
- Přidat soubor odděleného textu jako mapovou vrstvu. Soubor musí mít řádek hlavičky obsahující názvy polí. Soubor musí také obsahovat pole X a Y se souřadnicemi v desetinných jednotkách nebo WKT pole.
-
-
- Delimited Text
- Oddělený text
-
-
- Cannot get Delimited Text select dialog from provider.
- Nemohu získat dialog výběru Oddělený text od poskytovatele.
-
-
- Add a delimited text file as a map layer. The file must have a header row containing the field names. X and Y fields are required and must contain coordinates in decimal units.
- Přidá soubor s odděleným textem jako mapovou vrstvu. Soubor musí mít hlavičku obasující názvy polí. Vyžadovány jsou pole X a Y a musí obsahovat souřadnice v desetinných jednotkách.
-
-
-
- QgsDelimitedTextPluginGui
-
- No layer name
- Žádný název vrstvy
-
-
- Please enter a layer name before adding the layer to the map
- Vložte prosím název vrstvy dříve, než ji přidáte do mapy
-
-
- Text files
- Textové soubory
-
-
- Well Known Text files
- Well Known Text soubory
-
-
- All files
- Všechny soubory
-
-
- No delimiter
- Žádný oddělovač
-
-
- Please specify a delimiter prior to parsing the file
- Prosím uveďte oddělovač dříve než se bude zkoumat soubor
-
-
- Choose a delimited text file to open
- Vyberte soubor s ohraničeným textem
-
-
- Parse
- Rozdělit
-
-
-
- QgsDelimitedTextPluginGuiBase
-
- Create a Layer from a Delimited Text File
- Vytvořit vrstvu z textového souboru s odděleným textem (Delimited Text File)
-
-
- File Name
- Jméno souboru
-
-
- Browse...
- Procházet...
-
-
- Selected delimiters
- Vybrané oddělovače
-
-
- Semicolon
- Středník
-
-
- Tab
- Tab
-
-
- Space
- Mezera
-
-
- Comma
- Čárka
-
-
- Colon
- Dvojtečka
-
-
- Start import at row
- Začít import řádku
-
-
- The file contains X and Y coordinate columns
- Tento soubor obsahuje sloupce X a Y
-
-
- X Y fields
- X Y pole
-
-
- <p align="right">X field</p>
- <p align="right">X pole</p>
-
-
- Name of the field containing x values
- Název pole obsahujícího x-ové hodnoty
-
-
- Name of the field containing x values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- Název pole obsahujícího x-ové hodnoty. Vyberte pole ze seznamu. Seznam je generován na základě analýzy hlavičkového řádku souboru s odděleným textem.
-
-
- <p align="right">Y field</p>
- <p align="right">Y pole</p>
-
-
- Name of the field containing y values
- Název pole obsahujícího y-ové hodnoty
-
-
- Type
- Typ
-
-
- Name of the field containing y values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- Název pole obsahujícího y-ové hodnoty. Vyberte pole ze seznamu. Seznam je generován na základě analýzy hlavičkového řádku souboru s odděleným textem.
-
-
- Layer name
- Název vrstvy
-
-
- Name to display in the map legend
- Název, který se objeví v mapové legendě
-
-
- Name displayed in the map legend
- Název zobrazený v okně legendy
-
-
- Delimiter
- Oddělovač
-
-
- Delimiter string
- Řetězec oddělovače
-
-
- Delimiter to use when splitting fields in the text file. The delimiter can be more than one character.
- Oddelovač používaný pro seperaci jednotlivých polí v textovém souboru. Oddělovač se může skládat i z více než z jednoho znaku.
-
-
- Delimiter to use when splitting fields in the delimited text file. The delimiter can be 1 or more characters in length.
- Oddělovač používaný pro separaci jednotlivých polí v textovém souboru s odděleným textem. Oddělovač se může skládat z jednoho nebo více znaků.
-
-
- Geometry
- Geometrie
-
-
- Delimited text file
- Textový soubor s odděleným textem
-
-
- Full path to the delimited text file
- Úplná cesta k textovému souboru s odděleným textem
-
-
- Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
- Úplná cesta k textovému souboru s oddělovači (Delimited Text File). Aby bylo možné zkontrolovat (prohledat) pole v souboru musí být, dříve než jméno souboru, správně nastaven oddělovač. Pro procházení souborů použijte tlačitko napravo od pole pro výběr vstupního souboru.
-
-
- ...
- ...
-
-
- Browse to find the delimited text file to be processed
- Procházet a najít soubor s odděleným textem, který má být zpracován
-
-
- Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
- Toto tlačítko použijte pro nalezení místa, kde se nachází soubor s odděleným textem. Toto tlačítko nebude přístupné, dokud nebude vyplněno políčko <i>Oddělovač</i>. Potom, co bude zvolen soubor, budou naplněny i rozbalovací menu s políčkami X a Y ze souboru s odděleným textem.
-
-
- The file contains a well known text geometry field
- Soubor obsahuje pole geometrie - tzv. well known text
-
-
- WKT field
- WKT pole
-
-
- Decimal point
- Desetinná čárka/tečka
-
-
- Sample text
- Vzorek textu
-
-
- The delimiter is taken as is
- Jako oddělovač se bere
-
-
- Plain characters
- Jednoduché znaky
-
-
- The delimiter is a regular expression
- Oddělovač je regulérní výraz
-
-
- Regular expression
- Regulární výraz
-
-
QgsDelimitedTextProvider
-
- Note: the following lines were not loaded because Qgis was unable to determine values for the x and y coordinates:
-
- Poznámka: následující linie nebyly načteny, Qgis nemohl určit hodnoty pro souřadnice x a y:
-
-
-
- Error
- Chyba
-
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -29422,32 +21805,32 @@ p, li { white-space: pre-wrap; }
No delimiters set
- Nenastaveny žádné oddělovače
Use one or more characters as the delimiter, or choose a different delimiter type
- Použijte jeden nebo více znaků jako oddělovač nebo vyberte jiný typ oddělovače
Invalid regular expression
- Neplatný regulární výraz
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
- Neplatný soubor s odděleným textem
Please enter a valid file and delimiter
- Zadejte prosím platný soubor a oddělovač
Please select an input file
- Vyberte prosím vstupní soubor
File %1 does not exist
- Soubor %1 neexistuje
Please enter a layer name
- Zadejte prosím název vrstvy
At least one delimiter character must be specified
- Musí být zadán alespoň jeden znak jako oddělovač
Regular expression is not valid
- Regulární výraz není platný
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
- Definice názvu souboru a oddělovačů není platné
No data found in file
- V souboru nenalezena žádná data
%1 badly formatted records discarded
-
X and Y field names must be selected
- Musí být zvolena pole X a Y
X and Y field names cannot be the same
- Názvy polí X a Y se nesmí shodovat
%1 badly formatted records discarded from sample data
-
-
- Well Known Text files
- Well Known Text soubory
+
Create a Layer from a Delimited Text File
Vytvořit vrstvu z textového souboru s odděleným textem
-
- Fields are defined by the specified delimiter, quote, and escape characters
-
-
- Comma character is one of the delimiters
-
-
- Tab character is one of the delimiters
-
-
- Space character is one of the delimiters
-
-
- Colon character is one of the delimiters
-
-
- Semicolon character is one of the delimiters
-
-
- Other delimiters
-
-
- Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
-
- Quote
-
-
- The quote character(s) enclose fields which may include delimiters and new lines
-
-
- "
-
-
- Escape
-
-
- The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
-
- Expression
- Výraz
-
-
- Regular expression used to split each line into fields
-
-
- File format
-
-
- Geometry definition
-
-
- Geometry is a point defined by X and Y coordinate fields
-
-
- Point coordinates
-
-
- X and Y coordinates are expressed in degrees/minutes/seconds
-
-
- DMS coordinates
-
-
- Geometry is read as a well known text string from the selected fields
-
-
- Well known text (WKT)
-
-
- Geometry field
-
-
- Name of the field containing well known text value
-
-
- Geometry type
- Geometrický typ
-
-
- Detect
- Detekovat
-
-
- Point
- Bod
-
-
- Line
- Linie
-
-
- Polygon
- Polygon
-
-
- The file is a comma separated value file, fields delimited by commas and quoted by "
-
-
- CSV (comma separated values)
-
-
- Custom delimiters
-
-
- Each line in the file is split using a regular expression to define the end of each field
-
-
- Regular expression delimiter
-
-
- Use a spatial index to improve performance of displaying and spatially selecting features
-
-
- Use spatial index
-
-
- Use an index to improve performance of subset filters (set in layer properties)
-
-
- Use subset index
-
-
- Watch for changes to the file by other applications while QGIS is running
-
-
- Watch file
-
-
- The file contains only attribute information - it will not be displayed on the map
-
-
- No geometry (attribute only table)
-
File Name
@@ -29827,98 +21950,6 @@ p, li { white-space: pre-wrap; }
Name displayed in the map legend
Název zobrazený v okně legendy
-
- Encoding
- Kódování
-
-
- Select the file encoding
-
-
- Layer settings
-
-
- Sample data
-
-
- Record options
-
-
- Number of header lines to discard
-
-
- The number of lines to discard from the beginning of the file
-
-
- Field names are read from the first record. If not selected then fields are numbered
-
-
- First record has field names
-
-
- Field options
-
-
- Trim leading and trailing spaces from fields
-
-
- Trim fields
-
-
- Discard empty fields in each record
-
-
- Discard empty fields
-
-
- Number fields use comma for a decimal separator
-
-
- Decimal separator is comma
-
Browse to find the delimited text file to be processed
@@ -29935,24 +21966,18 @@ p, li { white-space: pre-wrap; }
Procházet...
- Selected delimiters
- Vybrané oddělovače
+ The file is a comma separated value file, fields delimited by commas and quoted by "
+
- The delimiter is a regular expression
- Oddělovač je regulérní výraz
-
-
- Regular expression
- Regulární výraz
-
-
- The delimiter is taken as is
- Oddělovač se bere tak jak je
-
-
- Plain characters
- Jednoduché znaky
+ Each line in the file is split using a regular expression to define the end of each field
+
Comma
Čárka
+
+ Encoding
+ Kódování
+
+
+ Select the file encoding
+ Vyberte kódování souboru
+
+
+ X and Y coordinates are expressed in degrees/minutes/seconds
+
+
+ DMS coordinates
+
+
+ Geometry field
+ Pole geometrie
+
+
+ Name of the field containing well known text value
+
+
+ Geometry type
+ Geometrický typ
+
+
+ Detect
+ Detekovat
+
+
+ Point
+ Bod
+
+
+ Line
+ Linie
+
+
+ Polygon
+ Polygon
+
+
+ Record options
+ Možnosti záznamu
+
+
+ Field options
+ Možnosti pole
+
+
+ File format
+ Formát souboru
+
+
+ Number of header lines to discard
+
+
+ The number of lines to discard from the beginning of the file
+
+
+ Field names are read from the first record. If not selected then fields are numbered
+
+
+ First record has field names
+
+
+ CSV (comma separated values)
+
+
+ Fields are defined by the specified delimiter, quote, and escape characters
+
+
+ Custom delimiters
+ Vlastní oddělovače
+
+
+ Regular expression delimiter
+
+
+ Use a spatial index to improve performance of displaying and spatially selecting features
+
+
+ Use spatial index
+ Použít prostorový index
+
+
+ Use an index to improve performance of subset filters (set in layer properties)
+
+
+ Use subset index
+
+
+ Watch for changes to the file by other applications while QGIS is running
+
+
+ Watch file
+ Sledovat soubor
+
+
+ Geometry definition
+ Definice geometrie
+
+
+ Geometry is a point defined by X and Y coordinate fields
+
+
+ Point coordinates
+ Souřadnice bodu
+
+
+ Geometry is read as a well known text string from the selected fields
+
+
+ Well known text (WKT)
+
+
+ The file contains only attribute information - it will not be displayed on the map
+
+
+ No geometry (attribute only table)
+
+
+ Trim leading and trailing spaces from fields
+
+
+ Trim fields
+
+
+ Discard empty fields in each record
+
+
+ Discard empty fields
+
+
+ Number fields use comma for a decimal separator
+
+
+ Decimal separator is comma
+
+
+ Comma character is one of the delimiters
+
+
+ Tab character is one of the delimiters
+
+
+ Space character is one of the delimiters
+
+
+ Colon character is one of the delimiters
+
+
+ Semicolon character is one of the delimiters
+
Semicolon
Středník
+
+ Other delimiters
+
+
+ Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
+
+
+ Quote
+
+
+ The quote character(s) enclose fields which may include delimiters and new lines
+
+
+ "
+
+
+ Escape
+
+
+ The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
+
+
+ Expression
+ Výraz
+
+
+ Regular expression used to split each line into fields
+
+
+ Layer settings
+
+
+ Sample data
+
Colon
Dvojtečka
-
- Delimiter to use when splitting fields in the text file. The delimiter can be more than one character.
- Oddelovač používaný pro seperaci jednotlivých polí v textovém souboru. Oddělovač se může skládat i z více než z jednoho znaku.
-
-
- Delimiter to use when splitting fields in the delimited text file. The delimiter can be 1 or more characters in length.
- Oddělovač používaný pro separaci jednotlivých polí v textovém souboru s odděleným textem. Oddělovač se může skládat z jednoho nebo více znaků.
-
-
- Start import at row
- Začít import řádku
-
-
- The file contains X and Y coordinate columns
- Tento soubor obsahuje sloupce X a Y
-
-
- X Y fields
- X Y pole
-
<p align="right">X field</p>
@@ -30011,10 +22350,6 @@ p, li { white-space: pre-wrap; }
Name of the field containing x values
Název pole obsahujícího x-ové hodnoty
-
- Name of the field containing x values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- Název pole obsahujícího x-ové hodnoty. Vyberte pole ze seznamu. Seznam je generován na základě analýzy hlavičkového řádku souboru s odděleným textem.
-
<p align="right">Y field</p>
@@ -30027,26 +22362,6 @@ p, li { white-space: pre-wrap; }
Name of the field containing y values
Název pole obsahujícího y-ové hodnoty
-
- Name of the field containing y values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- Název pole obsahujícího y-ové hodnoty. Vyberte pole ze seznamu. Seznam je generován na základě analýzy hlavičkového řádku souboru s odděleným textem.
-
-
- The file contains a well known text geometry field
- Soubor obsahuje pole geometrie - tzv. well known text
-
-
- WKT field
- WKT pole
-
-
- Decimal point
- Desetinná čárka/tečka
-
-
- Sample text
- Vzorek textu
-
QgsDetailedItemWidgetBase
@@ -30071,48 +22386,6 @@ p, li { white-space: pre-wrap; }
Popisek kategorie
-
- QgsDiagramDialog
-
- Pie chart
- Koláčový graf
-
-
- Bar chart
- Sloupcový graf
-
-
- Proportional SVG symbols
- Proporcionální SVG symboly
-
-
- linearly scaling
- lineární změna velikosti
-
-
-
- QgsDiagramDialogBase
-
- Dialog
- Dialog
-
-
- Display diagrams
- Zobrazit diagramy
-
-
- Diagram type
- Typ diagramu
-
-
- Classification attribute
- Klasifikační atribut
-
-
- Classification type
- Typ klasifikace
-
-
QgsDiagramProperties
@@ -30246,7 +22519,7 @@ p, li { white-space: pre-wrap; }
Bar length: Scale linearly, such as the following value matches the specified size.
-
Diagrams: No attributes added.
-
Interpolation value
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Pen color
Barva pera
-
- No attributes added.
- Nepřidány žádné atributy.
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
Nepřidali jste žádné atributy do této vrstvy diagramů. Určete prosím atributy pro vizualizaci v diagramech, nebo diagramy vypněte.
-
- No attribute value specified
- Neurčena hodnota atributu
-
-
- You did not specify a maximum value for the diagram size. Please specify the attribute and a reference value as a base for scaling in the Tab Diagram / Size.
- Neurčili jste maximální hodnotu pro velikost diagramu. Určete prosím atribut a referenční hodnotu jako základ pro škálování v panelu Diagram / Velikost.
-
QgsDiagramPropertiesBase
@@ -30429,7 +22690,7 @@ p, li { white-space: pre-wrap; }
Edit expression
- Upravit výraz
+
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Add expression
-
Angle
Úhel
-
- Ellipsoidal
- Elipsoidální
-
-
-
- QgsDlgPgBufferBase
-
- Buffer features
- Buffer zóna kolem objektů
-
-
- Buffer distance in map units:
- Velikost buffer zóny v mapových jednotkách:
-
-
- Table name for the buffered layer:
- Název tabulky pro vrstvu s buffer zónou:
-
-
- Create unique object id
- Vytvořit objekt s unikátním id
-
-
- public
- veřejné
-
-
- Geometry column:
- Sloupec s geometrií:
-
-
- Spatial reference ID:
- ID prostorové reference:
-
-
- Unique field to use as feature id:
- Unikátní pole použít jako id objektu:
-
-
- Schema:
- Schéma:
-
-
- Add the buffered layer to the map?
- Přidat do mapy vrstvu s buffer zónou?
-
-
- <h2>Buffer the features in layer: </h2>
- <h2>Buffer zóna kolem objektů ve vrstvě: </h2>
-
-
- Parameters
- Parametry
-
QgsDualView
-
- Attributes changed
- Atributy změněny
-
Expression based preview
@@ -30727,21 +22929,17 @@ Leave empty to automatically apply the maximum value.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Nemohu nastavit sloupec '%1' jako sloupec náhledu
Chyba parseru:
%2
-
- Run action
- Spustit akci
-
Run layer action
-
Form
- Formulář
+
Dummy Text
-
@@ -30806,12 +23004,12 @@ Chyba parseru:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -30819,57 +23017,57 @@ Chyba parseru:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
- Uložit jako
+
...
- ...
+
No symbology
- Žádná symbologie
+
Feature symbology
- Symbologie prvků
+
Symbol layer symbology
- Symbologie vrstvy symbolů
+
Select all
- Vybrat vše
+
Unselect all
- Zrušit výběr
+
Export features intersecting the current map extent
-
@@ -30878,12 +23076,12 @@ Chyba parseru:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -30926,51 +23124,17 @@ Chyba parseru:
Offset
- Odsazení
+
Horizontal anchor point
-
Vertical anchor point
-
-
-
- QgsEmbedLayerDialog
-
- Select project file
- Vyberte soubor projektu
-
-
- QGis files
- QGis soubory
-
-
- Recursive embeding not possible
- Rekurzivní připojování není možné
-
-
- It is not possible to embed layers / groups from the current project
- Není možné připojit vrstvy / skupiny z aktuálního projektu
-
-
-
- QgsEmbedLayerDialogBase
-
- Select layers and groups to embed
- Vyberte vrstvy a skupiny pro připojení
-
-
- Project file
- Soubor projektu
-
-
- ...
- ...
+
@@ -30988,10 +23152,6 @@ Chyba parseru:
QgsEngineConfigDialog
-
- Dialog
- Dialog
-
Search method
@@ -31043,19 +23203,14 @@ Chyba parseru:
Polygon
- Show all labels and features for all layers
- Zobrazit všechny popisky a prvky všech vrstev
+ (i.e. including colliding objects)
+ (tj. včetně kolidujících objektů)
Draw text as outlines (recommended)
-
-
- Show candidates (for debugging)
- Zobrazit kandidáty (pro odstraňování chyb programu)
+
Show partials labels
-
- Save settings with project
- Uložit nastavení s projektem
+ Show all labels and features for all layers
+ Zobrazit všechny popisky a prvky všech vrstev
Automated Placement Engine
-
- (i.e. including colliding objects)
- (tj. včetně kolidujících objektů)
-
-
- Show all labels (i.e. including colliding labels)
- Zobrazit všechny popisky (tj. včetně kolidujících popisků)
-
-
- Show label candidates (for debugging)
- Zobrazit kandidáty popisků (pro odstraňování chyb programu)
+ Show candidates (for debugging)
+ Zobrazit kandidáty (pro odstraňování chyb programu)
@@ -31110,18 +23258,18 @@ Chyba parseru:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
QgsExpressionBuilderWidget
-
- Operators
- Operátory
-
(String Concatenation)
@@ -31168,87 +23312,75 @@ p, li { white-space: pre-wrap; }
'Dia' || Diameter
'Dia' || Poloměr
-
- Fields
- Pole
-
-
- Conditionals
- Kondicionály
-
Search
Hledat
-
- Fields and Values
- Pole a hodnoty
-
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Load all unique values
Načíst všechny jedinečné hodnoty
-
- <h3>Oops! QGIS can't find help for this function.</h3>The help file for %1 was not found.<br>
- <h3>Oops! QGIS nemůže najít nápovědu pro tuto funkci.</h3>Soubor nápovědy pro %1 nebyl nalezen.<br>
-
-
- (Showing English version as there was no help available in your language (%1). If you would like to create it, contact the QGIS translation team).<br>
- (Zobrazuji anglickou verzi, protože nápověda neexistuje ve vašem jazyce (%1). Pokud byste ji chtěli vytvořit, kontaktujte prosím QGIS translation team).<br>
-
-
- It was neither available in your language (%1) nor English.
- Není k dispozici ni ve vašem jazyce (%1) ani anglicky.
-
-
- <br>If you would like to create it, contact the QGIS development team.
- <br>Pokud byste ji chtěli vytvořit, kontaktujte prosím QGIS translation team).
-
-
- This help file does not exist for your language:<p><b>%1</b><p>If you would like to create it, contact the QGIS development team
- Tato nápověda není k dispozici ve vašem jazycee:<p><b>%1</b><p> Pokud byste ji chtěli přeložit, kontaktuje prosím tým vývojářů QGISu
-
QgsExpressionBuilderWidgetBase
@@ -31308,59 +23420,35 @@ p, li { white-space: pre-wrap; }
Form
Formulář
-
- Function List
- Seznam funkcí
-
-
- Search
- Hledat
-
-
- Selected Function Help
- Nápověda vybrané funkce
-
-
- Field Values
- Hodnoty pole
-
-
- Load all unique values
- Načíst všechny jedinečné hodnoty
-
-
- Load 10 sample values
- Načíst 10 namátkových hodnot
-
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Equal operator
-
Addition operator
-
Subtraction operator
-
Division operator
-
Multiplication operator
-
Power operator
-
String Concatenation
-
Open Bracket
-
Close Bracket
-
layer
- vrstva
+
map view
- zobrazení mapy
+
user defined
- uživatelem definované
+
Extent (current: %1)
- Rozsah (aktuální: %1)
+
@@ -31540,37 +23628,37 @@ p, li { white-space: pre-wrap; }
Form
- Formulář
+
West
- Západ
+
East
- Východ
+
North
- Sever
+
South
- Jih
+
Layer extent
- Rozsah vrstvy
+
Map view extent
- Rozsah mapového okna
+
@@ -31586,19 +23674,11 @@ p, li { white-space: pre-wrap; }
Dialog
- Dialog
+
QgsFieldCalculator
-
- (not supported by provider)
- (nepodporováno poskytovatelem)
-
-
- Syntax error
- Chyba syntaxe
-
Only update %1 selected features
-
Výraz je neplatný, prohlédněte si (více informací) kvůli detailům
-
- An error occured while evaluating the calculation string.
- Při ověřování řetězce výpočtu došlo k chybě.
-
QgsFieldCalculatorBase
@@ -31662,24 +23738,15 @@ p, li { white-space: pre-wrap; }
Field calculator
Kalkulačka polí
-
- Create a new field
- Vytvořit nové pole
-
-
- Update existing field
- Aktualizovat existující pole
-
Only update selected features
Pouze aktualizovat vybrané prvky
- New field
- Nové pole
+ Create a new field
+ Vytvořit nové pole
Output field width
Šířka výstupního pole
-
- Output field precision
- Přesnost výstupního pole
-
-
- Fields
- Pole
-
-
- Values
- Hodnoty
-
-
- Sample
- Vzorek
-
-
- All
- Všechno
-
-
- Operators
- Operátory
-
Width of complete output. For example 123,456 means 6 as field width.
@@ -31731,92 +23774,9 @@ p, li { white-space: pre-wrap; }
Přesnost
- +
- +
-
-
- *
- *
-
-
- sqrt
- odmocnina
-
-
- sin
- sin
-
-
- tan
- tan
-
-
- acos
- arccos
-
-
- (
- (
-
-
- -
- -
-
-
- /
- /
-
-
- ^
- ^
-
-
- cos
- cos
-
-
- asin
- arcsin
-
-
- atan
- arctan
-
-
- )
- )
-
-
- to real
- na reálné
-
-
- to int
- na celé číslo
-
-
- to string
- na řetězec
-
-
- length
- délka
-
-
- area
- plocha
-
-
- rownum
- rownum
-
-
- ||
- ||
-
-
- Field calculator expression
- Výraz kalkulačky polí
+ Update existing field
+ Aktualizovat existující pole
@@ -31824,7 +23784,7 @@ p, li { white-space: pre-wrap; }
Expression dialog
-
@@ -31854,7 +23814,7 @@ p, li { white-space: pre-wrap; }
Type name
-
Layer
- Vrstva
+
Field
- Pole
+
Editor Widget
-
Fields
- Pole
+
Relations
- Vztahy
+
Suppress attribute form pop-up after feature creation
-
Default
- Výchozí
+
On
-
Off
- Vypnuto
+
...
- ...
+
Select a file
- Vybrat soubor
+
@@ -32194,13 +24154,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
@@ -32218,10 +24178,6 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
QgsFormAnnotationDialogBase
-
- Dialog
- Dialog
-
Form annotation
@@ -32299,36 +24255,6 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
GPS Device Editor
Editor GPS zařízení
-
- This is the name of the device as it will appear in the lists
- Toto je název zařízení tak jako se objeví v seznamu
-
-
- Commands
- Příkazy
-
-
- The command that is used to upload tracks to the device
- Příkaz, který se používá pro nahrání stop do zařízení
-
-
- The command that is used to download tracks from the device
- Příkaz, který se používá pro stáhnutí stop ze zařízení
-
-
- The command that is used to upload routes to the device
- Příkaz, který se používá pro nahrání cest do zařízení
-
-
- The command that is used to download routes from the device
- Příkaz, který se používá pro stáhnutí cest ze zařízení
-
Devices
@@ -32349,6 +24275,21 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Update
Aktualizovat
+
+ Device name
+ Název zařízení
+
+
+ This is the name of the device as it will appear in the lists
+ Toto je název zařízení tak jako se objeví v seznamu
+
+
+ Commands
+ Příkazy
+
Track download
@@ -32364,6 +24305,11 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Waypoint download
Stažení traťových bodů
+
+ The command that is used to download routes from the device
+ Příkaz, který se používá pro stáhnutí cest ze zařízení
+
Route download
@@ -32379,11 +24325,26 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Track upload
Načtení trasy
+
+ The command that is used to download tracks from the device
+ Příkaz, který se používá pro stáhnutí stop ze zařízení
+
+
+ The command that is used to upload routes to the device
+ Příkaz, který se používá pro nahrání cest do zařízení
+
The command that is used to download waypoints from the device
Příkaz, který se používá pro stáhnutí trasových bodů ze zařízení
+
+ The command that is used to upload tracks to the device
+ Příkaz, který se používá pro nahrání stop do zařízení
+
Waypoint upload
@@ -32394,7 +24355,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -32402,37 +24363,9 @@ p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">V příkazech pro stažení a načtení mohou být speciální slova, která budou nahrazena QGISem, když je příkaz použit. Tato slova jsou:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
-
- Device name
- Název zařízení
-
QgsGPSInformationWidget
-
- Connecting...
- Připojuji...
-
-
- Timed out!
- Čas vypršel!
-
-
- Connected!
- Připojeno!
-
-
- Disconnect
- Odpojit
-
-
- Connect
- Připojit
-
/gps
@@ -32443,16 +24376,31 @@ p, li { white-space: pre-wrap; }
No path to the GPS port is specified. Please enter a path then try again.
Nebyla zadána cesta k portu GPS. Zadejte prosím cestu a zkuste znovu.
+
+ Connecting...
+ Připojuji...
+
Connecting to GPS device...
Připojuji k zařízení GPS...
+
+ Timed out!
+ Čas vypršel!
+
Failed to connect to GPS device.
Selhalo připojení k zařízení GPS.
+
+ Connected!
+ Připojeno!
+
Dis&connect
@@ -32543,51 +24491,6 @@ p, li { white-space: pre-wrap; }
Invalid
Neplatný
-
- NMEA files
- NMEA soubory
-
-
- Not a vector layer
- Není vektorová vrstva
-
-
- The current layer is not a vector layer
- Aktuálně zvolená vrstva není vektorovou vrstvou
-
-
- 2.5D shape type not supported
- Tvary typu 2,5D nejsou podporovány
-
-
- Adding features to 2.5D shapetypes is not supported yet. Please select a different editable, non 2.5D layer and try again.
- Přidání prvků do 2.5D tvarů není zatím podporováno. Vyberte prosím jinou editovatelnou, ne 2.5D vrstvu a zkuste znovu.
-
-
- Multipart shape type not supported
- Typ vícedílných objektů není podporován
-
-
- Adding features to multipart shapetypes is not supported yet. Please select a different editable, non 2.5D layer and try again.
- Přidání prvků do vícedílných tvarů není zatím podporováno. Vyberte prosím jinou editovatelnou, ne 2.5D vrstvu a zkuste znovu.
-
-
- Layer cannot be added to
- Vrstva nemůže být přidána k
-
-
- The data provider for this layer does not support the addition of features.
- Přístup k datům pro tuto vrstvu nedovoluje přidání prvků.
-
-
- Layer not editable
- Vrstva není editovatelná
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Nemohu editovat vektorovou vrstvu. Použijte "Přepnout editaci" aby byla vrstva editovatelná.
-
Save GPS log file as
Uložit GPS log soubor jako
+
+ NMEA files
+ NMEA soubory
+
&Add feature
@@ -32674,147 +24582,6 @@ Chyby: %2
QgsGPSInformationWidgetBase
-
- Form
- Formulář
-
-
- ...
- ...
-
-
- Connect
- Připojit
-
-
- Latitude
- Zeměpisná šířka
-
-
- Longitude
- Zeměpisná délka
-
-
- Elevation
- Elevace
-
-
- Vertical Accuracy
- Svislá přesnost
-
-
- Horizontal Accuracy
- Vodorovná přesnost
-
-
- Add vertex
- Přidat lomový bod
-
-
- Add feature
- Přidat prvek
-
-
- Reset current feature
- Resetovat aktuální prvek
-
-
- GPS device port
- Port GPS zařízení
-
-
- GPS connection
- GPS připojení
-
-
- Autodetect
- Automatická detekce
-
-
- Use path / port below
- Použít cestu / port níže
-
-
- Path to serial device
- Cesta k sériovému zařízení
-
-
- Port
- Port
-
-
- Host
- Hostitel
-
-
- Device
- Zařízení
-
-
- ddddd;
- ddddd;
-
-
- Connection to gpsd
- Připojení ke gpsd
-
-
- GPS cursor size
- Velikost GPS kurzoru
-
-
- Small
- Malý
-
-
- Large
- Velký
-
-
- GPS digitizing
- GPS digitalizace
-
-
- Auto-add vertices
- Automaticky přidat lomové body
-
-
- GPS map recenter
- Vycentrování GPS mapy
-
-
- when leaving extents
- při opuštění rozsahu
-
-
- never
- nikdy
-
-
- always
- vždy
-
-
- Track
- Trasa
-
GPS Connect
@@ -32852,6 +24619,18 @@ zelená = dobrá nebo 3D korekce
Reset track
Resetovat trasu
+
+ ...
+ ...
+
Position
@@ -33037,6 +24816,11 @@ zelená = dobrá nebo 3D korekce
Connection
Připojení
+
+ Autodetect
+ Automatická detekce
+
Serial device
@@ -33047,6 +24831,21 @@ zelená = dobrá nebo 3D korekce
Refresh serial device list
Aktualizovat seznam sériových zařízení
+
+ Port
+ Port
+
+
+ Host
+ Hostitel
+
+
+ Device
+ Zařízení
+
00000;
@@ -33067,6 +24866,11 @@ zelená = dobrá nebo 3D korekce
Digitizing
Digitalizace
+
+ Track
+ Trasa
+
Automatically add points
@@ -33077,6 +24881,11 @@ zelená = dobrá nebo 3D korekce
Track width in pixels
Šířka trasy v pixelech
+
+ width
+ šířka
+
Color
@@ -33122,26 +24931,38 @@ zelená = dobrá nebo 3D korekce
% of map extent
% mapového rozsahu
+
+ never
+ nikdy
+
+
+ always
+ vždy
+
Cursor
Kurzor
- width
- šířka
+ Small
+ Malý
+
+
+ Large
+ Velký
QgsGPSPlugin
- &Gps
- &GPS
-
-
- &Gps Tools
- &Nástroje na práci s GPS
+ &GPS Tools
+ &GPS nástroje
Uložit novou vrstvu GPX jako...
- GPS eXchange file (*.gpx)
- GPS výměnný formát (*.gpx)
+ GPS eXchange file
+ Soubor GPS eXchange
GPX Loader
Zavaděč GPX
+
+ Unable to read the selected file.
+Please reselect a valid file.
+ Nemohu přečíst vybraný soubor.
+Vyberte prosím nějaký platný soubor.
+
Error importing data
Chyba při importu dat
+
+ Could not convert data from %1!
+
+
+ Nelze konvertovat data z %1!
+
+
+
+
+ Error converting data
+ Chyba při konvertování dat
+
Not supported
Není podporován
+
+ This device does not support downloading of %1.
+ Toto zařízení nepodporuje stažení %1.
+
Downloading data...
@@ -33254,6 +25102,11 @@ zelená = dobrá nebo 3D korekce
Error downloading data
Chyba při stahování dat
+
+ This device does not support uploading of %1.
+ Toto zařízení nepodporuje načtení %1.
+
Uploading data...
@@ -33273,66 +25126,9 @@ zelená = dobrá nebo 3D korekce
Error uploading data
Chyba při nahrávání dat
-
- Could not convert data from %1!
-
-
- Nelze konvertovat data z %1!
-
-
-
-
- &GPS Tools
- &GPS nástroje
-
-
- GPS eXchange file
- Soubor GPS eXchange
-
-
- Error converting data
- Chyba při konvertování dat
-
-
- Unable to read the selected file.
-Please reselect a valid file.
- Nemohu přečíst vybraný soubor.
-Vyberte prosím nějaký platný soubor.
-
-
- This device does not support downloading of %1.
- Toto zařízení nepodporuje stažení %1.
-
-
- This device does not support uploading of %1.
- Toto zařízení nepodporuje načtení %1.
-
QgsGPSPluginGui
-
- GPS eXchange format (*.gpx)
- GPS výměnný formát (*.gpx)
-
-
- Select GPX file
- Vyberte soubor GPX
-
-
- Select file and format to import
- Vyberte soubor a formát k importu
-
GPS eXchange format
GPS eXchange formát
+
+ Select GPX file
+ Vyberte soubor GPX
+
+
+ Select file and format to import
+ Vyberte soubor a formát k importu
+
Waypoints from a route
@@ -33386,6 +25193,11 @@ Vyberte prosím nějaký platný soubor.
Track from waypoints
Trasa z traťových bodů
+
+ GPS eXchange format (*.gpx)
+ GPS výměnný formát (*.gpx)
+
QgsGPSPluginGuiBase
@@ -33399,6 +25211,23 @@ Vyberte prosím nějaký platný soubor.
Load GPX file
Nahrát soubor GPX
+
+ File
+ Soubor
+
+
+ Browse...
+ Procházet...
+
+
+ Feature types
+ Typy prvků
+
Import other file
Importovat jiný soubor
-
- Download from GPS
- Stáhnout z GPS
-
-
- Edit devices
- Upravit zařízení
-
-
- Upload to GPS
- Nahrát do GPS
-
-
- File
- Soubor
-
-
- Browse...
- Procházet...
-
-
- Feature types
- Typy prvků
-
File to import
@@ -33490,28 +25287,53 @@ Vyberte prosím nějaký platný soubor.
(Note: Selecting correct file type in browser dialog important!)
(Poznámka: Vybrání správného typu souboru je důležité!)
+
+ Download from GPS
+ Stáhnout z GPS
+
GPS device
GPS zařízení
+
+ Edit devices...
+ Upravit zařízení...
+
Port
Port
+
+ Refresh
+ Obnovit
+
Output file
Výstupní soubor
+
+ Upload to GPS
+ Nahrát do GPS
+
Data layer
Datová vrstva
+
+ Edit devices
+ Upravit zařízení
+
GPX Conversions
@@ -33527,16 +25349,6 @@ Vyberte prosím nějaký platný soubor.
Conversion
Převod
-
- Edit devices...
- Upravit zařízení...
-
-
- Refresh
- Obnovit
-
QgsGPXProvider
@@ -33568,42 +25380,30 @@ Vyberte prosím nějaký platný soubor.
Band %1
Kanál %1
-
- Dimensions:
- Rozměry:
-
X: %1 Y: %2 Bands: %3
X: %1 Y: %2 Kanálů: %3
-
- Origin:
- Počátek:
-
-
- Pixel Size:
- Velikost pixelu:
-
Dimensions
- Rozměry
+
Origin
-
Pixel Size
-
Band
- Kanál
+
Cannot get GDAL raster band: %1
Nemohu získat GDAL rastrové pásmo: %1
-
- Cubic
- Kubický
-
-
- None
- Žádná
-
-
- out of extent
- mimo rozsah
-
-
- null (no data)
- null (žádná data)
-
-
- Average Magphase
- Průměrná Magphase
-
-
- Average
- Průměr
-
QgsGenericProjectionSelector
+
+ Define this layer's coordinate reference system:
+ Definovat souřadnicový referenční systém této vrstvy:
+
This layer appears to have no projection specification.
@@ -33657,11 +25438,6 @@ Vyberte prosím nějaký platný soubor.
By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.
Standardně bude zobrazení této vrstvy nastaveno na zobrazení projektu, což můžete změnit vybráním jiného zobrazení níže.
-
- Define this layer's coordinate reference system:
- Definovat souřadnicový referenční systém této vrstvy:
-
QgsGenericProjectionSelectorBase
@@ -33676,17 +25452,17 @@ Vyberte prosím nějaký platný soubor.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -33834,6 +25610,21 @@ Vyberte prosím nějaký platný soubor.
Show coords
Zobrazit souřadnice
+
+ Residual units
+ Reziduální jednotky
+
+
+ Pixels
+ Pixely
+
+
+ Use map units if possible
+ Použít jednotky mapy, pokud možno
+
PDF report
@@ -33870,21 +25661,6 @@ Vyberte prosím nějaký platný soubor.
Paper size
Velikost papíru
-
- Residual units
- Reziduální jednotky
-
-
- Pixels
- Pixely
-
-
- Use map units if possible
- Použít jednotky mapy, pokud možno
-
QgsGeorefDescriptionDialogBase
@@ -33898,7 +25674,7 @@ Vyberte prosím nějaký platný soubor.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -33906,25 +25682,9 @@ p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Type</span></p></body></html>
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html>
-
QgsGeorefPlugin
-
- &About
- &O doplňku
-
QgsGeorefPluginGui
+
+ Georeferencer
+ Georeferencování
+
All other files (*)
@@ -33997,6 +25762,12 @@ p, li { white-space: pre-wrap; }
Load GCP points
Načíst GCP body
+
+ GCP file
+ GCP soubor
+
No GCP points to save
@@ -34029,6 +25800,11 @@ p, li { white-space: pre-wrap; }
Toolbars
Nástrojové lišty
+
+ Current transform parametrisation
+ Parametrizace aktuální transformace
+
Coordinate:
@@ -34040,30 +25816,25 @@ p, li { white-space: pre-wrap; }
Aktuální souřadnice na mapě
- Current transform parametrisation
- Parametrizace aktuální transformace
+ None
+ Žádná
+
+
+ Coordinate of image(column/line)
+ Souřadnice obrázku (sloupec/linie)
Unable to open GCP points file %1
Nemohu otevřít soubor s GCP body %1
-
- Could not write to %1
- Nemohu zapisovat do %1
-
Save GCPs
Uložit GCP
-
- Georeferencer
- Georeferencování
-
Save GCP points?
@@ -34074,6 +25845,11 @@ p, li { white-space: pre-wrap; }
Failed to get linear transform parameters
Selhalo získání parametrů lineární transformace
+
+ World file exists
+ Soubor s georeferencí existuje
+
<p>The selected file already seems to have a world file! Do you want to replace it with the new world file?</p>
@@ -34090,6 +25866,25 @@ p, li { white-space: pre-wrap; }
Error
Chyba
+
+ Could not write to %1
+ Nemohu zapisovat do %1
+
+
+ map units
+ mapových jednotek
+
+
+ pixels
+ pixelů
+
Transformation parameters
@@ -34120,46 +25915,16 @@ p, li { white-space: pre-wrap; }
Rotation [degrees]
Rotace [stupně]
-
- Residuals
- Rezidua
-
-
- map units
- mapových jednotek
-
-
- GCP file
- GCP soubor
-
-
- None
- Žádná
-
-
- Coordinate of image(column/line)
- Souřadnice obrázku (sloupec/linie)
-
-
- pixels
- pixelů
-
Mean error [%1]
Průměrná chyba [%1]
+
+ Residuals
+ Rezidua
+
yes
@@ -34260,11 +26025,6 @@ p, li { white-space: pre-wrap; }
Not set
Nenastaveno
-
- World file exists
- Soubor s georeferencí existuje
-
QgsGeorefPluginGuiBase
@@ -34343,7 +26103,7 @@ p, li { white-space: pre-wrap; }
Zoom to Layer
- Zvětšit podle vrstvy
+ Přiblížit na vrstvu
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
-
- Link Georeferencer to QGis
- Linkovat georeferencování do QGISu
-
-
- Link QGis to Georeferencer
- Linkovat QGIS do georeferencování
+
TMS
TMS
-
- Worldwind
- Worldwind
-
URL/File
@@ -34596,47 +26344,47 @@ p, li { white-space: pre-wrap; }
Map
- Mapa
+
Base Layer
-
URL
- URL
+
TextLabel
- TextLabel
+
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Error: %1 on line %2, column %3
-
WFS
- WFS
+
GML Getfeature network request failed with error: %1
-
Network
- Síť
+
@@ -34799,202 +26547,102 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
QgsGradientFillSymbolLayerV2Widget
-
- Color
- Barva
-
-
- Color 2
- Barva 2
-
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Color (start)
-
Color (end)
-
Angle
- Úhel
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
-
-
- QgsGraduatedSymbolDialog
-
- Equal Interval
- Stejný interval
-
-
- Quantiles
- Kvantily
-
-
- Empty
- Prázdný
-
-
-
- QgsGraduatedSymbolDialogBase
-
- graduated Symbol
- stupňovaný symbol
-
-
- Delete class
- Smazat třídu
-
-
- Classify
- Klasifikace
-
-
- Classification field
- Pole klasifikace
-
-
- Mode
- Mód
-
-
- Number of classes
- Počet tříd
+
QgsGraduatedSymbolRendererV2Model
- Symbol
Symbol
- Value
Hodnota
- Label
Popisek
QgsGraduatedSymbolRendererV2Widget
-
- Range
- Rozsah
-
-
- Label
- Popisek
-
-
- Symbol levels...
- Úrovně symbolů...
-
-
- Error
- Chyba
-
-
- There are no available color ramps. You can add them in Style Manager.
- Nejsou dostupné žádné barevné rozsahy. Můžete je přidat ve Správci stylů.
-
-
- The selected color ramp is not available.
- Vybraný barevný rozsah není k dispozici.
-
-
- Warning
- Upozornění
-
-
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
-Press cancel to abort breaks calculation or OK to continue.
-
-
- Renderer creation has failed.
- Vytvoření vykreslovače selhalo.
-
-
- change
- změnit
-
Column
@@ -35035,25 +26683,6 @@ Press cancel to abort breaks calculation or OK to continue.
Quantile (Equal Count)
Kvantil (Equal Count)
-
- Invert
- Invertovat
-
-
- Delete
- Smazat
-
-
- Delete all
- Smazat vše
-
-
- Quantile
- Kvantil
-
Natural Breaks (Jenks)
@@ -35069,6 +26698,11 @@ Press cancel to abort breaks calculation or OK to continue.
Pretty Breaks
Pretty Breaks
+
+ Invert
+
Classify
@@ -35080,22 +26714,61 @@ Press cancel to abort breaks calculation or OK to continue.
Přidat třídu
- Delete class
- Smazat třídu
+ Delete
+ Smazat
+
+
+ Delete all
+ Smazat vše
Advanced
Pokročilé
+
+ Symbol levels...
+ Úrovně symbolů...
+
+
+ Error
+ Chyba
+
+
+ There are no available color ramps. You can add them in Style Manager.
+ Nejsou dostupné žádné barevné rozsahy. Můžete je přidat ve Správci stylů.
+
+
+ The selected color ramp is not available.
+ Vybraný barevný rozsah není k dispozici.
+
+
+ Warning
+
+
+ Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
+Press cancel to abort breaks calculation or OK to continue.
+
+
+ Renderer creation has failed.
+ Vytvoření vykreslovače selhalo.
+
QgsGrassAttributes
-
- Warning
- Upozornění
-
Column
@@ -35111,6 +26784,16 @@ Press cancel to abort breaks calculation or OK to continue.
Type
Typ
+
+ Layer
+ Vrstva
+
+
+ Warning
+ Upozornění
+
ERROR
@@ -35121,11 +26804,6 @@ Press cancel to abort breaks calculation or OK to continue.
OK
OK
-
- Layer
- Vrstva
-
QgsGrassAttributesBase
@@ -35144,20 +26822,15 @@ Press cancel to abort breaks calculation or OK to continue.
result
výsledek
-
- Update
- Aktualizovat
-
Update database record
Aktualizovat záznam v databázi
- New
- Nový
+ Update
+ Aktualizovat
Přidat novou kategorii nastavením v GRASS Edit toolbox
- Delete
- Smazat
+ New
+ Nový
Delete selected category
Vymazat vybranou kategorii
+
+ Delete
+ Smazat
+
QgsGrassBrowser
@@ -35212,6 +26890,12 @@ Press cancel to abort breaks calculation or OK to continue.
Refresh
Obnovit
+
+ New name
+ Nový název
+
Warning
Upozornění
-
- Information
- Informace
-
-
- Remove the selected layer(s) from QGis canvas before continue.
- Odstranit vybrané vrstvy z mapového okna QGISu před pokračováním.
-
-
- Question
- Dotaz
-
-
- Are you sure you want to delete %n selected layer(s)?
- number of layers to delete
-
- Opravdu chcete smazat %n vybranou vrstvu?
- Opravdu chcete smazat %n vybrané vrstvy?
- Opravdu chcete smazat %n vybraných vrstev?
-
-
-
- Cannot write new region
- Nelze zapsat nový region
-
-
- New name
- Nový název
-
Cannot copy map %1@%2
@@ -35278,84 +26927,40 @@ Press cancel to abort breaks calculation or OK to continue.
Cannot rename map %1
Nemohu přejmenovat mapu %1
+
+ Information
+ Informace
+
Remove the selected layer(s) from canvas before continue.
-
+
+ Question
+ Dotaz
+
+
+ Are you sure you want to delete %n selected layer(s)?
+ number of layers to delete
+ Opravdu chcete smazat %n vybranou vrstvu? Opravdu chcete smazat %n vybrané vrstvy? Opravdu chcete smazat %n vybraných vrstev?
Cannot delete map %1
Nemohu smazat mapu %1
+
+ Cannot write new region
+ Nelze zapsat nový region
+
QgsGrassEdit
-
- New point
- Nový bod
-
-
- New centroid
- Nový centroid
-
-
- Delete vertex
- Odstranit lomový bod
-
-
- Edit tools
- Nástoje pro editaci
-
-
- New line
- Nová linie
-
-
- New boundary
- Nová hranice
-
-
- Move vertex
- Posunout lomový bod
-
-
- Add vertex
- Přidat lomový bod
-
-
- Split line
- Rozdělit linii
-
-
- Edit attributes
- Modifikovat atributy
-
-
- Close
- Zavřít
-
-
- Move element
- Přesunout element
-
-
- Delete element
- Odstranit element
-
Nelze otevřít vektorová data pro aktualizaci.
- Info
- Informace
+ Edit tools
+ Nástoje pro editaci
- The table was created
- Byla vytvořena tabulka
+ New point
+ Nový bod
- Tool not yet implemented.
- Nástroj zatím nebyl implementován.
+ New line
+ Nová linie
- Orphan record was left in attribute table. <br>Delete the record?
- V atributové tabulce zůstal osiřelý záznam. <br>Smazat záznam?
+ New boundary
+ Nová hranice
- Cannot delete orphan record:
- Nelze smazat osiřelý záznam:
+ New centroid
+ Nový centroid
+
+
+ Move vertex
+ Posunout lomový bod
+
+
+ Add vertex
+ Přidat lomový bod
+
+
+ Delete vertex
+ Odstranit lomový bod
+
+
+ Move element
+ Přesunout element
+
+
+ Split line
+ Rozdělit linii
+
+
+ Delete element
+ Odstranit element
+
+
+ Edit attributes
+ Modifikovat atributy
+
+
+ Close
+ Zavřít
No category
Žádná kategorie
+
+ Info
+ Informace
+
+
+ The table was created
+ Byla vytvořena tabulka
+
+
+ Tool not yet implemented.
+ Nástroj zatím nebyl implementován.
+
Cannot check orphan record: %1
Nemohu zkontrolovat osiřelý záznam: %1
+
+ Orphan record was left in attribute table. <br>Delete the record?
+ V atributové tabulce zůstal osiřelý záznam. <br>Smazat záznam?
+
+
+ Cannot delete orphan record:
+ Nelze smazat osiřelý záznam:
+
Cannot describe table for field %1
@@ -35511,18 +27181,6 @@ Press cancel to abort breaks calculation or OK to continue.
-- Right: %1
-- Vpravo: %1
-
- Left: %1
- Vlevo: %1
-
-
- Middle: %1
- Uprostřed: %1
-
-
- Right: %1
- Vpravo: %1
-
QgsGrassEditAddVertex
@@ -35571,6 +27229,12 @@ Press cancel to abort breaks calculation or OK to continue.
Mode
Mód
+
+ Layer
+ Vrstva
+
Settings
@@ -35586,21 +27250,6 @@ Press cancel to abort breaks calculation or OK to continue.
Symbology
Symbolika
-
- Table
- Tabulka
-
-
- Add Column
- Přidat sloupec
-
-
- Create / Alter Table
- Vytvořit / změnit tabulku
-
Line width
@@ -35611,12 +27260,6 @@ Press cancel to abort breaks calculation or OK to continue.
Marker size
Velikost značky
-
- Layer
- Vrstva
-
Disp
@@ -35638,6 +27281,11 @@ Press cancel to abort breaks calculation or OK to continue.
Index
Index
+
+ Table
+ Tabulka
+
Column
@@ -35648,6 +27296,16 @@ Press cancel to abort breaks calculation or OK to continue.
Length
Délka
+
+ Add Column
+ Přidat sloupec
+
+
+ Create / Alter Table
+ Vytvořit / změnit tabulku
+
QgsGrassEditDeleteLine
@@ -35743,14 +27401,6 @@ Press cancel to abort breaks calculation or OK to continue.
Undo last vertex
Zpět poslední uzel
-
- New point
- Nový bod
-
-
- Undo last point
- Poslední bod zpět
-
Close line
@@ -36122,6 +27772,12 @@ Press cancel to abort breaks calculation or OK to continue.
Current y-coordinate of moving window
Aktuální y-ová souřadnice pohyblivého okna
+
+ Output
+ Výstup
+
Cannot get current region
Nelze získat aktuální region
+
+ Cannot check region of map %1
+ Nemohu zkontrolovat region mapy %1
+
+
+ Cannot get region of map %1
+ Nemohu získat region mapy %1
+
No GRASS raster maps currently in QGIS
@@ -36168,6 +27834,11 @@ Press cancel to abort breaks calculation or OK to continue.
Enter vector name
Zadejte název vektoru
+
+ The file already exists. Overwrite?
+ Soubor již existuje. Přepsat?
+
Cannot open mapcalc file
Nelze otevřít mapcalc soubor
-
- Output
- Výstup
-
-
- Cannot check region of map %1
- Nemohu zkontrolovat region mapy %1
-
-
- Cannot get region of map %1
- Nemohu získat region mapy %1
-
-
- The file already exists. Overwrite?
- Soubor již existuje. Přepsat?
-
The mapcalc schema (%1) not found.
@@ -36246,15 +27896,9 @@ na linii %2 sloupci %3
QgsGrassModule
- Run
- Spustit
-
-
- Stop
- Zastavit
+ Module: %1
+ Modul: %1
Warning
Upozornění
-
- Cannot get input region
- Nelze získat vstupní region
-
-
- Use Input Region
- Užijte vstupní region
-
-
- <B>Successfully finished</B>
- <B>Úspěšně dokončeno</B>
-
-
- <B>Finished with error</B>
- <B>Ukončeno s chybou</B>
-
-
- <B>Module crashed or killed</B>
- <B>Modul se zhroutil nebo byl ukončen</B>
-
-
- Please ensure you have the GRASS documentation installed.
- Prosím ujistěte se, že máte nainstalovanou dokumentaci GRASS.
-
-
- Module: %1
- Modul: %1
-
The module file (%1) not found.
@@ -36343,6 +27951,11 @@ na řádku %2 sloupci %3
Cannot find man page %1
Nemohu najít stránku manuálu %1
+
+ Please ensure you have the GRASS documentation installed.
+ Prosím ujistěte se, že máte nainstalovanou dokumentaci GRASS.
+
Not available, description not found (%1)
@@ -36358,11 +27971,28 @@ na řádku %2 sloupci %3
Not available, incorrect description (%1)
Nedostupné, nesprávný popis (%1)
+
+ Run
+ Spustit
+
+
+ Cannot get input region
+ Nelze získat vstupní region
+
Input %1 outside current region!
Vstup %1 mimo aktuální region!
+
+ Use Input Region
+ Užijte vstupní region
+
Output %1 exists! Overwrite?
@@ -36378,6 +28008,26 @@ na řádku %2 sloupci %3
Cannot start module: %1
Nemohu spustit modul: %1
+
+ Stop
+ Zastavit
+
+
+ <B>Successfully finished</B>
+ <B>Úspěšně dokončeno</B>
+
+
+ <B>Finished with error</B>
+ <B>Ukončeno s chybou</B>
+
+
+ <B>Module crashed or killed</B>
+ <B>Modul se zhroutil nebo byl ukončen</B>
+
QgsGrassModuleBase
@@ -36396,30 +28046,30 @@ na řádku %2 sloupci %3
Output
Výstup
-
- Run
- Spustit
-
-
- Close
- Zavřít
-
Manual
Manuál
+
+ TextLabel
+ TextLabel
+
+
+ Run
+ Spustit
+
View output
Výstup pohledu
- TextLabel
- TextLabel
+ Close
+ Zavřít
@@ -36472,11 +28122,6 @@ na řádku %2 sloupci %3
Warning
Upozornění
-
- PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
- Ovladač PostGIS nepodporuje schémata v OGR!<br>Bude použit pouze název tabulky.<br>Což může způsobit chybové načtení, pokud je v databázi více<br>tabulek se stejným názvem.
-
Cannot find layeroption %1
@@ -36497,6 +28142,11 @@ na řádku %2 sloupci %3
Select a layer
Vyberte vrstvu
+
+ PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
+ Ovladač PostGIS nepodporuje schémata v OGR!<br>Bude použit pouze název tabulky.<br>Což může způsobit chybové načtení, pokud je v databázi více<br>tabulek se stejným názvem.
+
%1: no input
@@ -36505,6 +28155,11 @@ na řádku %2 sloupci %3
QgsGrassModuleInput
+
+ Input
+ Vstup
+
Warning
Upozornění
-
- Use region of this map
- Použít region této mapy
-
Cannot find typeoption %1
@@ -36540,6 +28190,11 @@ na řádku %2 sloupci %3
GRASS element %1 not supported
GRASS prvek %1 nepodporován
+
+ Use region of this map
+ Použít region této mapy
+
Select a layer
@@ -36561,11 +28216,6 @@ na řádku %2 sloupci %3
%1: no input
%1: žádný vstup
-
- Input
- Vstup
-
QgsGrassModuleOption
@@ -36616,21 +28266,6 @@ na řádku %2 sloupci %3
QgsGrassModuleStandardOptions
-
- Item with key %1 not found
- Položka s klíčem %1 nenalezena
-
-
- << Hide advanced options
- << Skrýt pokročilé možnosti
-
-
- Show advanced options >>
- Zobrazit pokročilé možnosti >>
-
Warning
Upozornění
-
- Cannot get current region
- Nelze získat aktuální region
-
Cannot find module %1
@@ -36707,11 +28336,32 @@ na řádku %2 sloupci %3
Cannot find key %1
Nemohu najít klíč %1
+
+ << Hide advanced options
+ << Skrýt pokročilé možnosti
+
+
+ Show advanced options >>
+ Zobrazit pokročilé možnosti >>
+
+
+ Item with key %1 not found
+ Položka s klíčem %1 nenalezena
+
Item with id %1 not found
Položka s id %1 nenalezena
+
+ Cannot get current region
+ Nelze získat aktuální region
+
Cannot check region of map %1
@@ -36737,7 +28387,7 @@ na řádku %2 sloupci %3
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Databáze
- Location 2
- Lokace 2
+ Location 1
+ Lokace 1
+
+
+ System mapset
+ Systémový mapset
Uživatelský mapset
- System mapset
- Systémový mapset
-
-
- Location 1
- Lokace 1
+ Location 2
+ Lokace 2
The directory doesn't exist!
Adresář neexistuje!
+
+ No writable locations, the database is not writable!
+ Žádné zapisovatelné oblasti, databáze není zapisovatelná!
+
Enter location name!
@@ -36840,6 +28495,38 @@ na řádku %2 sloupci %3
East must be greater than west
Východ musí být větší než západ
+
+ Regions file (%1) not found.
+ Soubor regionu (%1) nenalezen.
+
+
+ Cannot open locations file (%1)
+ Nemohu otevřít soubor lokací (%1)
+
+
+ Cannot read locations file (%1):
+ Nemohu přečíst soubor lokací (%1):
+
+
+
+%1
+at line %2 column %3
+
+%1
+na řádku %2 sloupci %3
+
+
+ Cannot create QgsCoordinateReferenceSystem
+ QgsCoordinateReferenceSystem nemůže být vytvořen
+
Cannot reproject selected region.
@@ -36880,6 +28567,11 @@ na řádku %2 sloupci %3
Create location
Vytvořit lokaci
+
+ Cannot create new location: %1
+ Nemohu vytvořit novou lokaci: %1
+
Create mapset
Vytvořit mapset
+
+ Cannot create new mapset directory
+ Nelze vytvořit nový adresář mapsetu
+
Cannot open DEFAULT_WIND
@@ -36903,71 +28600,53 @@ na řádku %2 sloupci %3
New mapset
Nový mapset
-
- New mapset successfully created and set as current working mapset.
- Nový mapset byl úspěšně vytvořen a nastaven jako současný pracovní mapset.
-
-
- Cannot create new mapset directory
- Nelze vytvořit nový adresář mapsetu
-
-
- Cannot create QgsCoordinateReferenceSystem
- QgsCoordinateReferenceSystem nemůže být vytvořen
-
-
- No writable locations, the database is not writable!
- Žádné zapisovatelné oblasti, databáze není zapisovatelná!
-
-
- Regions file (%1) not found.
- Soubor regionu (%1) nenalezen.
-
-
- Cannot open locations file (%1)
- Nemohu otevřít soubor lokací (%1)
-
-
- Cannot read locations file (%1):
- Nemohu přečíst soubor lokací (%1):
-
-
-
-%1
-at line %2 column %3
-
-%1
-na řádku %2 sloupci %3
-
-
- Cannot create new location: %1
- Nemohu vytvořit novou lokaci: %1
-
New mapset successfully created, but cannot be opened: %1
Nový mapset úspěšně vytvořen, ale nemohl být načtena: %1
+
+ New mapset successfully created and set as current working mapset.
+ Nový mapset byl úspěšně vytvořen a nastaven jako současný pracovní mapset.
+
QgsGrassNewMapsetBase
+
+ New Mapset
+ Nový Mapset
+
+
+ GRASS Database
+ Databáze GRASS
+
+
+ Tree
+ Strom
+
+
+ Comment
+ Komentář
+
Example directory tree:
Příklad adresářového stromu:
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data jsou uložena ve stromové adresářové struktuře. Databáze GRASS je na nejvyšší adresář v této stromové struktuře.</p></body></html>
+
Database Error
@@ -36979,11 +28658,21 @@ na řádku %2 sloupci %3
Database:
Databáze:
+
+ Browse...
+ Procházet...
+
Select existing directory or create a new one:
Vybrat existující adresář nebo vytvořit nový:
+
+ GRASS Location
+ GRASS lokace
+
Location
@@ -37004,6 +28693,21 @@ na řádku %2 sloupci %3
Location Error
Chyba lokace
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS lokace je soubor map pro jednotlivá území nebo projekty.</p></body></html>
+
+
+ Projection
+ Zobrazení
+
Projection Error
@@ -37014,41 +28718,24 @@ na řádku %2 sloupci %3
Coordinate system
Souřadnicový systém
-
- Projection
- Zobrazení
-
Not defined
Není definováno
- N
- S
+ Default GRASS Region
+ Výchozí GRASS Region
- W
- Z
-
-
- E
- V
-
-
- S
- J
-
-
- Region Error
- Chyba regionu
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">Region GRASS definuje pracovní oblast pro rastrové moduly. Výchozí region je platný pro jednu lokaci. Je možné nastavit rozdípné regiony pro různé mapsety.Výchozí region je možné změnit později.</p></body></html>
Set
Sada
+
+ Region Error
+ Chyba regionu
+
+
+ S
+ J
+
+
+ W
+ Z
+
+
+ E
+ V
+
+
+ N
+ S
+
+
+ Mapset
+ Mapset
+
New mapset:
@@ -37070,92 +28788,10 @@ na řádku %2 sloupci %3
Mapset Error
Chyba mapsetu
-
- <p align="center">Existing masets</p>
- <p align="center">Existující mapsety</p>
-
-
- Location:
- Lokace:
-
-
- Mapset:
- Mapset:
-
-
- New Mapset
- Nový Mapset
-
-
- GRASS Database
- Databáze GRASS
-
-
- Tree
- Strom
-
-
- Comment
- Komentář
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data jsou uložena ve stromové adresářové struktuře. Databáze GRASS je na nejvyšší adresář v této stromové struktuře.</p></body></html>
-
-
- Browse...
- Procházet...
-
-
- GRASS Location
- GRASS lokace
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS lokace je soubor map pro jednotlivá území nebo projekty.</p></body></html>
-
-
- Default GRASS Region
- Výchozí GRASS Region
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">Region GRASS definuje pracovní oblast pro rastrové moduly. Výchozí region je platný pro jednu lokaci. Je možné nastavit rozdípné regiony pro různé mapsety.Výchozí region je možné změnit později.</p></body></html>
-
-
- Mapset
- Mapset
-
<p align="center">Existing mapsets</p>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS mapset je soubor map používaným jediným uživatelem. Uživatel může číst mapy ze všech mapsetů v lokaci, ale přepisovat je může pouzé ve své lokaci (vlastněné uživatelem).</p></body></html>
@@ -37176,59 +28812,39 @@ p, li { white-space: pre-wrap; }
Create New Mapset
Vytvořit nový mapset
+
+ Location:
+ Lokace:
+
+
+ Mapset:
+ Mapset:
+
QgsGrassPlugin
- GRASS
- GRASS
+ GrassVector
+ GrassVector
- &GRASS
- &GRASS
+ 0.1
+ 0.1
+
+
+ GRASS layer
+ GRASS vrstva
Plugins
Zásuvné moduly
-
- Open mapset
- Otevřít mapset
-
-
- New mapset
- Nový mapset
-
-
- Close mapset
- Zavřít mapset
-
-
- Add GRASS vector layer
- Přidat GRASS vektorovou vrstvu
-
Add GRASS raster layer
@@ -37254,6 +28870,26 @@ p, li { white-space: pre-wrap; }
Edit Grass Vector layer
Editovat GRASS vektorovou vrstvu
+
+ Open Mapset
+
+
+ New Mapset
+
+
+ Close Mapset
+
+
+ Add GRASS Vector Layer
+
Adds a GRASS vector layer to the map canvas
@@ -37264,6 +28900,11 @@ p, li { white-space: pre-wrap; }
Adds a GRASS raster layer to the map canvas
Přidat GRASS rastrovou vrstvu do mapového plátna
+
+ Open GRASS Tools
+
Displays the current GRASS region as a rectangle on the map canvas
@@ -37280,23 +28921,38 @@ p, li { white-space: pre-wrap; }
Editovat aktuálně vybranou GRASS vektorovou vrstvu.
- GrassVector
- GrassVector
+ Create New Grass Vector
+
- 0.1
- 0.1
+ &GRASS
+ &GRASS
- GRASS layer
- GRASS vrstva
-
-
- Create new Grass Vector
- Vytvořit nový GRASS vektor
+ GRASS
+ GRASS
Cannot open vector %1 in mapset %2
Nemohu otevřít vektor %1 v mapsetu %2
+
+ Cannot open GRASS vector:
+ %1
+ Nemohu otevřít GRASS vektor:
+ %1
+
New vector name
Nový název vektoru
+
+ Cannot create new vector: %1
+ Nemohu otevřít nový vektor: %1
+
New vector created but cannot be opened by data provider.
@@ -37349,58 +29017,16 @@ p, li { white-space: pre-wrap; }
Cannot start editing.
Nelze začít editaci.
-
- GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
- GISDBASE, LOCATION_NAME nebo MAPSET není nastaven, nelze zobrazit aktuální region.
-
-
- Cannot open GRASS vector:
- %1
- Nemohu otevřít GRASS vektor:
- %1
-
-
- Open Mapset
-
-
- New Mapset
- Nový Mapset
-
-
- Close Mapset
-
-
- Add GRASS Vector Layer
-
-
- Open GRASS Tools
-
-
- Create New Grass Vector
-
-
- Cannot create new vector: %1
- Nemohu otevřít nový vektor: %1
-
Cannot open vector for update.
Nelze otevřít vektorová data pro aktualizaci.
+
+ GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
+ GISDBASE, LOCATION_NAME nebo MAPSET není nastaven, nelze zobrazit aktuální region.
+
Cannot read current region: %1
@@ -37437,14 +29063,6 @@ p, li { white-space: pre-wrap; }
QgsGrassRasterProvider
-
- Out of extent
- Mimo rozsah
-
-
- null (no data)
- null (žádná data)
-
cellhd file %1 does not exist
@@ -37480,16 +29098,16 @@ p, li { white-space: pre-wrap; }
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
GISDBASE, LOCATION_NAME nebo MAPSET není nastaven, nelze zobrazit aktuální region.
-
- Cannot write region
- Nelze zapsat region
-
Cannot read current region: %1
Nemohu přečíst aktuální region: %1
+
+ Cannot write region
+ Nelze zapsat region
+
QgsGrassRegionBase
@@ -37498,39 +29116,6 @@ p, li { white-space: pre-wrap; }
GRASS Region Settings
Nastavení regionu GRASSu (pracovní oblasti)
-
- N
- S
-
-
- W
- Z
-
-
- E
- V
-
-
- S
- J
-
-
- N-S Res
- Rozlišení S-J
-
-
- Rows
- Řádky
-
-
- Cols
- Sloupce
-
-
- E-W Res
- Rozlišení V-Z
-
Extent
@@ -37583,6 +29168,11 @@ nebo změňte následující hodnoty
Columns
Sloupce
+
+ Rows
+ Řádky
+
Border
@@ -37598,14 +29188,6 @@ nebo změňte následující hodnoty
Width
Tloušťka
-
- OK
- OK
-
-
- Cancel
- Storno
-
QgsGrassSelect
@@ -37629,18 +29211,6 @@ nebo změňte následující hodnoty
Select GRASS Mapset
Vybrat GRASS mapset
-
- Warning
- Upozornění
-
-
- Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
- Nemohu otevřít vektor %1 v mapsetu %2 na úrovni 2 (topologie nedostupná, zkuste obnovit topologii použitím v.build modulu).
-
-
- Cannot open vector %1 in mapset %2
- Nemohu otevřít vektor %1 v mapsetu %2
-
Choose existing GISDBASE
@@ -37679,6 +29249,11 @@ nebo změňte následující hodnoty
QgsGrassSelectBase
+
+ Add GRASS Layer
+ Přidat vrstvu GRASSu
+
Gisdbase
@@ -37687,11 +29262,7 @@ nebo změňte následující hodnoty
Location
-
-
- Browse
- Procházet
+ Umístění
Map name
Název mapy
+
+ Select or type map name (wildcards '*' and '?' accepted for rasters)
+ Vyberte nebo uveďte jméno mapy (konvence '*' a '?' budou akceptovány pro rastrové vrstvy)
+
Layer
@@ -37713,24 +29289,6 @@ nebo změňte následující hodnoty
Browse...
Procházet...
-
- OK
- OK
-
-
- Select or type map name (wildcards '*' and '?' accepted for rasters)
- Vyberte nebo uveďte jméno mapy (konvence '*' a '?' budou akceptovány pro rastrové vrstvy)
-
-
- Add GRASS Layer
- Přidat vrstvu GRASSu
-
-
- Cancel
- Storno
-
QgsGrassShell
@@ -37759,29 +29317,11 @@ nebo změňte následující hodnoty
QgsGrassTools
-
- Browser
- Prohlížeč
-
GRASS Tools
GRASS nástroje
-
- Warning
- Upozornění
-
-
- GRASS Shell is not compiled.
- GRASS příkazová řádka není zkompolována.
-
Modules List
Seznam modulů
+
+ Browser
+ Prohlížeč
+
Direct Modules Tree
@@ -37818,6 +29363,19 @@ nebo změňte následující hodnoty
Cannot start command shell (%1)
Nemohu spustit příkazovou řádku (%1)
+
+ Warning
+ Upozornění
+
+
+ GRASS Shell is not compiled.
+ GRASS příkazová řádka není zkompolována.
+
The config file (%1) not found.
@@ -37888,60 +29446,60 @@ na linii %2 sloupci %3
Add feature
- Přidat prvek
+
Start editing failed
- Editace selhala
+
Provider cannot be opened for editing
- Poskytovatel nemůže být otevřen pro editaci
+
Stop editing
- Ukončit editaci
+
Do you want to save the changes to layer %1?
- Chcete uložit změny do vrstrvy %1?
+
Error
- Chyba
+
Problems during roll back
- Problémy během při návratu zpět
+
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
-
Show more
-
@@ -37966,18 +29524,10 @@ na linii %2 sloupci %3
Provider
Poskytovatel
-
- New file
- Nový soubor
-
-
- New datasource
- Nový datový zdroj
-
Datasource
- Datový zdroj
+
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Je tu stále %n nespravovaná vrstva, která bude ztracena pokud nyní skončíte.
- Jsou tu stále %n nespravované vrstvy, která budou ztraceny pokud nyní skončíte.
- Je tu stále %n nespravovaných vrstev, které budou ztraceny pokud nyní skončíte.
-
+ Je tu stále %n nespravovaná vrstva, která bude ztracena pokud nyní skončíte. Jsou tu stále %n nespravované vrstvy, která budou ztraceny pokud nyní skončíte. Je tu stále %n nespravovaných vrstev, které budou ztraceny pokud nyní skončíte.
@@ -38029,92 +29575,22 @@ na linii %2 sloupci %3
Handle bad layers
Spravovat špatné vrstvy
-
- Layer name
- Název vrstvy
-
-
- Type
- Typ
-
-
- Provider
- Poskytovatel
-
-
- Original filename
- Název původního souboru
-
-
- New filename
- Nový název souboru
-
-
- Original datasource
- Původní zdroj dat
-
-
- New datasource
- Nový zdroj dat
-
QgsHandleBadLayersHandler
-
- Handle Bad layers
- Spravovat špatné vrstvy
-
Handle bad layers
- Spravovat špatné vrstvy
+
%1 of %2 bad layers were not fixable.
-
-
- %1 of %2 bad layers were not not fixable.
- %1 ze %2 špatných vrstev nebylo opravitelných.
+
QgsHelpViewer
-
- This help file is not available in your language %1. If you would like to translate it, please contact the QGIS development team.
- Tato nápověda není k dispozici ve vašem jazyce %1. Pokud byste ji chtěli přeložit, kontaktuje prosím tým vývojářů QGISu.
-
-
- <h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
- <h3>Oops! QGIS nemůže najít nápovědu pro tento formulář.</h3>Soubor nápovědy pro %1 nebyl nalezen ve vašem jazyce.<br>Pokud byste ho chtěli vytvořit, kontaktujte prosím vývojářský tým QGISu
-
-
- Error
- Chyba
-
-
- The QGIS help database is not installed
- Databáze s nápovědou ke QGISu není nainstalována
-
-
- Quantum GIS Help
- Quantum GIS nápověda
-
-
- This help file does not exist for your language:<p><b>%1</b><p>If you would like to create it, contact the QGIS development team
- Tato nápověda není k dispozici ve vašem jazycee:<p><b>%1</b><p> Pokud byste ji chtěli přeložit, kontaktuje prosím tým vývojářů QGISu
-
-
- Quantum GIS Help - %1
- Nápověda Quantum GISu - %1
-
-
- Failed to get the help text from the database:
- %1
- Selhalo získání textu nápovědy z databáze:
- %1
-
QGIS Help
@@ -38133,45 +29609,13 @@ na linii %2 sloupci %3
about:blank
about:blank
-
- &Home
- &Domov
-
-
- Alt+H
- Alt+H
-
-
- &Forward
- &Dopředu
-
-
- Alt+F
- Alt+F
-
-
- &Back
- &Zpět
-
-
- Alt+B
- Alt+B
-
-
- &Close
- &Zavřít
-
-
- Alt+C
- Alt+C
-
QgsHtmlAnnotationDialog
HTML annotation
-
WMS Server responded unexpectedly with HTTP Status Code %1 (%2)
Nečekaná odezva WMS serveru s HTTP Status Code %1 (%2)
-
- HTTP response completed, however there was an error: %1
- HTTP odezva dokončena, nicméně se vyskytla chyba: %1
-
-
- HTTP transaction completed, however there was an error: %1
- Transakce HTTP dokončena, nicméně se objevila chyba: %1
-
Received %1 of %2 bytes
@@ -38211,6 +29645,16 @@ na linii %2 sloupci %3
Received %1 bytes (total unknown)
Získáno %1 bytů (celkem neznámo)
+
+ HTTP response completed, however there was an error: %1
+ HTTP odezva dokončena, nicméně se vyskytla chyba: %1
+
+
+ HTTP transaction completed, however there was an error: %1
+ Transakce HTTP dokončena, nicméně se objevila chyba: %1
+
Not connected
@@ -38251,14 +29695,10 @@ na linii %2 sloupci %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Připojení vypršelo po %n sekundách nečinnosti.
-To může být problém vašeho síťového nastavení nebo WMS serveru.
- Připojení vypršelo po %n sekundách nečinnosti.
-To může být problém vašeho síťového nastavení nebo WMS serveru.
- Připojení vypršelo po %n sekundách nečinnosti.
-To může být problém vašeho síťového nastavení nebo WMS serveru.
-
+ Připojení vypršelo po %n sekundách nečinnosti.
+To může být problém vašeho síťového nastavení nebo WMS serveru. Připojení vypršelo po %n sekundách nečinnosti.
+To může být problém vašeho síťového nastavení nebo WMS serveru. Připojení vypršelo po %n sekundách nečinnosti.
+To může být problém vašeho síťového nastavení nebo WMS serveru.
@@ -38274,81 +29714,6 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Vzdálenostní koeficient P
-
- QgsIdentifyResults
-
- (Derived)
- (Odvozené)
-
-
- Identify Results
- Identifikovat výsledky
-
-
- Feature
- Objekt
-
-
- Value
- Hodnota
-
-
- Edit feature form
- Upravit formulář prvku
-
-
- View feature form
- Zobrazit formulář prvku
-
-
- Clear results
- Vyčistit výsledky
-
-
- Clear highlights
- Vyčistit zvýraznění
-
-
- Highlight all
- Zvýraznit vše
-
-
- Highlight layer
- Zvýraznit vrstvu
-
-
- Attribute changes
- Změny atributů
-
-
- Run actions
- Spustit akci
-
-
- Zoom to feature
- Přiblížit na prvek
-
-
- Copy attribute value
- Kopírovat hodnotu atributu
-
-
- Copy feature attributes
- Kopírovat atributy prvku
-
-
- Expand all
- Rozbalit vše
-
-
- Collapse all
- Sbalit vše
-
-
- Attribute changed
- Atribut změněn
-
-
QgsIdentifyResultsBase
@@ -38356,33 +29721,25 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Identify Results
Identifikovat výsledky
-
- Tree
- Strom
-
-
- Table
- Tabulka
-
Layer
- Vrstva
+
FID
-
Attribute
- Atribut
+
Value
- Hodnota
+
...
+
+ Clear Results
+ Vyčistit výsledky
+
+
+ Help
+ Nápověda
+
+
+ Select identify mode
+
+
+ Mode
+ Režim
+
+
+ Select view mode for raster layers
+
+
+ View
+
+
+ Auto open form
+
Collapse tree.
@@ -38410,11 +29802,6 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.New results will be expanded by default.
Nové výsledky budou defaultně rozbaleny.
-
- Clear Results
-
Copy selected feature to clipboard.
@@ -38425,36 +29812,6 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Print selected HTML response.
Vytisknout vybranou HTML odezvu.
-
- Help
- Nápověda
-
-
- Select identify mode
-
-
- Mode
-
-
- Select view mode for raster layers
-
-
- View
- Pohled
-
-
- Auto open form
-
QgsIdentifyResultsDialog
@@ -38476,22 +29833,22 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.
Current layer
- Aktuální vrstva
+ Aktuální vrstva
Top down, stop at first
- Shora dolů, zastavit na první
+ Shora dolů, zastavit na první
Top down
- Shora dolů
+ Shora dolů
Layer selection
- Výběr vrstvy
Table
- Tabulka
+
Tree
- Strom
+
Graph
-
feature id
- id prvku
+
No attributes.
-
Toggle feature selection
-
Activate layer
-
Attributes changed
- Atributy změněny
-
-
- Attribute changes
- Změny atributů
+
Cannot print
-
-
- Could not open url
- Nemohu otevřít url
-
-
- Could not open URL '%1'
- Nemohu otevřít URL '%1'
-
-
- Cannot not print
- Nemohu vytisknout
+
QgsInterpolationDialogBase
-
- Output
- Výstup
-
-
- ...
- ...
-
Interpolation plugin
@@ -38756,11 +30086,6 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Input
Vstup
-
- Use z-Coordinate for interpolation
- Použít z-souřadnici k interpolaci
-
Vector layers
@@ -38771,6 +30096,11 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Interpolation attribute
Interpolovaný atribut
+
+ Use z-Coordinate for interpolation
+ Použít z-souřadnici k interpolaci
+
Add
@@ -38796,11 +30126,22 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Type
Typ
+
+ Output
+ Výstup
+
Interpolation method
Interpolační metoda
+
+ ...
+ ...
+
Number of columns
@@ -38873,7 +30214,7 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -38881,56 +30222,17 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.
Form
- Formulář
+
Sub renderer:
-
Merge polygons before rendering (slow)
-
-
-
- QgsItemPositionDialogBase
-
- Set item position
- Nastavit pozici položky
-
-
- Item reference point
- Referenční bod položky
-
-
- Coordinates
- Souřadnice
-
-
- x
- x
-
-
- y
- y
-
-
- Width
- Šířka
-
-
- Height
- Výška
-
-
- Set Position
- Nastavit pozici
-
-
- Close
- Zavřít
+
@@ -38967,86 +30269,11 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Form1
Formulář1
-
- Preview:
- Náhled:
-
-
- QGIS Rocks!
- QGIS Rocks!
-
-
- Font
- Písmo
-
-
- %
- %
-
-
- Transparency:
- Průhlednost:
-
-
- Size:
- Velikost:
-
-
- Above
- Nad
-
-
- Over
- Přes
-
-
- Left
- Nalevo
-
-
- Below
- Pod
-
Label Properties
Vlastnosti popisku
-
- Right
- Napravo
-
-
- Above Right
- Napravo nad
-
-
- Below Right
- Napravo pod
-
-
- Above Left
- Nalevo nad
-
-
- Below Left
- Nalevo pod
-
- Field containing label
- Pole obsahující popisek
+ Below Right
+ Napravo pod
- Default label
- Standardní popisek
+ Right
+ Napravo
- Data defined buffer
- Daty definovaný barevný okraj popisků
+ Below
+ Pod
- Data defined position
- Daty definovaná pozice
+ Over
+ Přes
- Color
- Barva
+ Above
+ Nad
- Angle (deg)
- Úhel (stupně)
+ Left
+ Nalevo
- Buffer size
- Velikost obalové zóny
+ Below Left
+ Nalevo pod
- X Offset (pts)
- X odsazení (body)
+ Above Right
+ Napravo nad
- Y Offset (pts)
- Y odsazení (body)
+ Above Left
+ Nalevo nad
- Basic label options
- Možnosti základního popisku
+ Use scale dependent rendering
+ Používat vykreslování v závislosti na měřítku
+
+
+ Maximum
+ Maximum
+
+
+ Minimum
+ Minimum
Buffer labels
Obarvit okraj popisků
+
+ Buffer size
+ Velikost obalové zóny
+
V mapových jednotkách
+
+ Color
+ Barva
+
+
+ %
+ %
+
Transparency
@@ -39144,6 +30395,47 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Y offset
Y odsazení
+
+ Basic label options
+ Možnosti základního popisku
+
+
+ Field containing label
+ Pole obsahující popisek
+
+
+ Default label
+ Standardní popisek
+
+
+ Font size
+ Velikost písma
+
+
+ Angle (deg)
+ Úhel (stupně)
+
+
+ °
+ °
+
+
+ Font
+ Písmo
+
+
+ Multiline labels?
+ Značky multičar?
+
Label only selected features
@@ -39194,11 +30486,36 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Size units
Jednotky velikosti
+
+ &Color
+ &Barva
+
Strikeout
Přeškrtnutí
+
+ Data defined buffer
+ Daty definovaný barevný okraj popisků
+
+
+ Transparency:
+ Průhlednost:
+
+
+ Size:
+ Velikost:
+
+
+ Data defined position
+ Daty definovaná pozice
+
X Coordinate
@@ -39210,57 +30527,38 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Souřadnice Y
- Multiline labels?
- Značky multičar?
+ X Offset (pts)
+ X odsazení (body)
- Font size
- Velikost písma
+ Y Offset (pts)
+ Y odsazení (body)
- Use scale dependent rendering
- Používat vykreslování v závislosti na měřítku
+ Preview:
+ Náhled:
- Maximum
- Maximum
-
-
- Minimum
- Minimum
-
-
- °
- °
-
-
- &Color
- &Barva
+ QGIS Rocks!
+ QGIS Rocks!
QgsLabelPropertyDialog
- Label font
- Písmo popisku
+ Expression result
+ Výsledek výrazu
Font color
Barva písma
-
- Expression result
- Výsledek výrazu
-
Buffer color
@@ -39284,42 +30582,17 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Font
Písmo
+
+ Available typeface styles
+ Dostupné typy písma
+
Size
Velikost
-
- Display
- Zobrazit
-
-
- Show label
- Zobrazit popisek
-
-
- Max
- Max
-
-
- Min
- Min
-
-
- Scale-based
- Závislý na měřítku
-
-
- Available typeface styles
- Dostupné typy písma
-
Style
@@ -39369,6 +30642,31 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.I
I
+
+ Display
+ Zobrazit
+
+
+ Scale-based
+ Závislý na měřítku
+
+
+ Min
+ Min
+
+
+ Max
+ Max
+
+
+ Show label
+ Zobrazit popisek
+
Ignores priority and permits collisions/overlaps
@@ -39423,8 +30721,9 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.
QgsLabelingGui
- pt
- pt
+ points
+
map units
- mapových jednotek
-
-
- (not found!)
- (nenalezeno!)
-
-
- Sample
- Vzorek
-
-
- points
- bodů
+
mm
- mm
+
% of length
- % délky
+
%1 not found. Default substituted.
-
Chosen font
-
string
- řetězec
+
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
- int [1-10000] {0-20]?}
+
int [0-2000]
- int [1-10000] {0-2000]?}
+
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
(BUFFER NEZOBRAZEN, v mapových jednotkách)
-
- Expression based label
- Popiska založená na výrazu
-
No change
@@ -39602,26 +30884,6 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.File not found
Soubor nenalezen
-
- Mixed Case
- Různá velikost písmen
-
-
- All Uppercase
- Všechna písmena velká
-
-
- All Lowercase
- Všechna písmena malá
-
-
- Title Case
- Písmo nadpisu
-
-
- Select SVG symbol
- Vybrat SVG symbol
-
QgsLabelingGuiBase
@@ -39631,184 +30893,9 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Nastavení popisků vrstvy
- Label settings
- Nastavení popisku
-
-
- Label this layer
- Vytvořit popisky pro vrstvu
-
-
- Field with labels
- Pole s popisky
-
-
- Minimum
- Minimum
-
-
- Maximum
- Maximum
-
-
- Formatted numbers
- Formátovaná čísla
-
-
- Decimal places
- Desetinných míst
-
-
- Show plus sign
- Zobrazit značku plus
-
-
- Advanced
- Pokročilé
-
-
- Options
- Možnosti
-
-
- Label every part of multi-part features
- Popisku pro každou část vícedílných prvků
-
-
- Merge connected lines to avoid duplicate labels
- Sloučit spojené linie a vyhnout se tak duplicitním popiskám
-
-
- Multiline labels
- Popisky multičar
-
-
- Add direction symbol
- Přidat symbol směru
-
-
- Features don't act as obstacles for labels
- Prvky nefungují jako překážky pro popisky
-
-
- Wrap label on character
- Zalomit popisek na znaku
-
-
- Placement
- Umístění
-
-
- around point
- okolo bodu
-
-
- over point
- přes bod
-
-
- parallel
- paralelně
-
-
- curved
- zakřiveně
-
-
- horizontal
- vodorovný
-
-
- over centroid
- přes centroid
-
-
- around centroid
- okolo centroidu
-
-
- horizontal (slow)
- vodorovně (pomalé)
-
-
- free (slow)
- volné (pomalé)
-
-
- using perimeter
- podle poloměru
-
-
- Label distance
- Vzdálenost popisek
-
-
- mm
- mm
-
-
- Rotation
- Rotace
-
-
- degrees
- stupňů
-
-
- above line
- nad čárou
-
-
- on line
- na čáře
-
-
- below line
- pod čarou
-
-
- Orientation
- Orientace
-
-
- map
- mapa
-
-
- line
- čára
-
-
- Text style
- Styl textu
-
-
- Font
- Písmo
-
-
- TextLabel
- TextLabel
+ Label this layer with
+ Vytvořit popisky vrstvy z
...
...
-
- Color
- Barva
-
-
- Buffer
- Obalová zóna
-
-
- Size
- Velikost
-
-
- Centroid
- Těžiště
-
-
- abc
- abc
-
-
- Quadrant
- Kvadrant
-
-
- Distance
- Vzdálenost
-
-
- Data defined
- Definovaný daty
-
-
- X
- X
-
-
- Y
- Y
-
-
- Coordinate
- Souřadnice
-
-
- Preserve data rotation values
- Zachovat hodnoty rotace dat
-
-
- vertical
- svislý
-
-
- Label options
- Možnosti popisků
-
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
-
- Pixel size-based visibility (labels in map units)
-
-
- Feature options
- Možnosti prvků
-
-
- mm
- mm
-
-
- Sample
- Vzorek
-
Lorem Ipsum
Příliš žluťoučký kůň úpěl ďábelské ódy
-
- Font size
- Velikost písma
-
-
- In points
- V bodech
-
-
- In map units
- V mapových jednotkách
-
-
- Priority
- Priorita
-
-
- Low
- Nízká
-
-
- High
- Vysoká
-
-
- Scale-based visibility
- Viditelnost závislá na měřítku
-
-
- Enabled
- Povoleno
-
-
- Minimum
- Minimum
-
-
- Maximum
- Maximum
-
-
- label every part of multi-part features
- popisku pro každou část vícedílného objektu
-
-
- merge connected lines to avoid duplicate labels
- sloučit propojené čáry pro vyloučení duplicitních popisek
-
-
- Suppress labeling of features smaller than
- Potlačit popisky prvků menších než
-
-
- features don't act as obstacles for labels
- objekty neslouží jako překážky pro popisky
-
-
- Engine settings
- Nastavení algoritmu
-
-
- In mm
- V mm
-
-
- Line orientation dependent position
- Pozice závislá na orientaci linie
-
-
- Data defined settings
- Daty definované nastavení
-
-
- Font properties
- Vlastnosti písma
-
-
- Bold
- Tučné
-
-
- Italic
- Kurzíva
-
-
- Underline
- Podtržené
-
-
- Font family
- Rodina písem
-
-
- Position
- Umístění
-
-
- Expression
- Výraz
-
Sample text
@@ -40147,22 +31018,63 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Sample background color
Ukázková barva pozadí
+
+ Line direction symbol
+
+
+ Formatted numbers
+ Formátovaná čísla
+
+
+ Decimal places
+ Desetinných míst
+
+
+ Show plus sign
+ Zobrazit značku plus
+
+
+ Multiple lines
+ Více řádků
+
+
+ Automated placement settings (apply to all layers)
+
+
+ Text/Buffer Sample
+
+
+ Text
+
Formatting
-
Shadow
-
Rendering
Vykreslování
@@ -40221,18 +31133,13 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.
Font is missing.
-
Text formatting
Formátování textu
-
- Multiple lines
- Více řádků
-
Wrap on character
@@ -40255,7 +31162,7 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.
Alignment
Zarovnání
@@ -40284,27 +31191,29 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.
Force point inside polygon
-
Repeat
-
- Discourage labels from covering features
-
+
+ Text style
+ Styl textu
Available typeface styles
Dostupné typy písma
-
- Underlined Text
- Podtržený text
-
U
@@ -40320,14 +31229,6 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.S
S
-
- points
- bodů
-
-
- map units
- mapových jednotek
-
Style
@@ -40351,12 +31252,9 @@ To může být problém vašeho síťového nastavení nebo WMS serveru. %
- Word spacing
- Mezery mezi slovy
-
-
- Letter spacing
- Mezery mezi písmeny
+ Capitalization style of text
+ Styl s velkými počátečními písmeny
- Capitalization style of text
- Styl s velkými počátečními písmeny
+ Font
+ Písmo
- Color area inside of pen stroke
- Barevná oblast uvnitř čar pera
+ Color
+ Barva
- Automated placement settings
- Nastavení automatického rozmístění
+ Size
+ Velikost
+
+
+ Buffer
+ Obalová zóna
+
+
+ Labels will not show if larger than this on screen
+ Popisky se nezobrazí pokud jsou větší než toto na obrazovce
+
+
+ px
+ px
+
+
+ Data defined
+ Definovaný daty
+
+
+ X
+ X
+
+
+ Y
+ Y
+
+
+ Coordinate
+ Souřadnice
+
+
+ Preserve data rotation values
+ Zachovat hodnoty rotace dat
+
+
+ horizontal
+ vodorovný
+
+
+ vertical
+ svislý
+
+
+ Label options
+ Možnosti popisků
+
+
+ Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
+
+
+ Maximum
+ Maximum
+
+
+ Pixel size-based visibility (labels in map units)
+
+
+ Labels will not show if smaller than this on screen
+ Popisky se nezobrazí pokud jsou menší než toto na obrazovce
+
+
+ Minimum
+ Minimum
+
+
+ <
+ <
+
+
+ Scale-based visibility
+ Viditelnost závislá na měřítku
+
+
+ >
+ >
+
+
+ Placement
+ Umístění
+
+
+ left/right
+ vlevo/vpravo
+
+
+ above
+ nad
+
+
+ below
+ pod
+
+
+ Reverse direction
+ Zpětný směr
+
+
+ Priority
+ Priorita
+
+
+ Low
+ Nízká
+
+
+ High
+ Vysoká
Zakřiveně
-
- Edit expression
- Upravit výraz
-
-
- Automated placement settings (apply to all layers)
-
-
- Text/Buffer Sample
-
-
- Line direction symbol
-
Text buffer
-
Draw text buffer
-
Color buffer's fill
-
Draw drop shadow
-
+
+ Blur radius
+
+
+ Blur only alpha pixels
+
Label's rotation is ignored
-
Use global shadow
-
+
+ ˚
+
+
+ Lowest label component
+
+
+ Draw under
+
S použitím obvodu
-
- Centroid of
- Centroid od
-
visible polygon
@@ -40525,6 +31577,13 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.whole polygon
celého polygonu
+
+ Rotation
+ Rotace
+
Above line
@@ -40541,12 +31600,51 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Pod linií
- X
- X
+ Line orientation dependent position
+ Pozice závislá na orientaci linie
- Text/Buffer sample
- Ukázka textu/bufferu
+ Centroid
+ Těžiště
+
+
+ abc
+ abc
+
+
+ Quadrant
+ Kvadrant
+
+
+ Distance
+ Vzdálenost
+
+
+ outside
+ vně
+
+
+ inside
+ uvnitř
+
+
+ Maximum angle between curved characters
+ Maximální úhel mezi zakřivenými znaky
Styl pera při spojování
-
- Blending mode
- Styl mísení
-
-
- Line direction symbols
- Symboly směru linie
-
-
- Symbol(s)
- Symbol(y)
-
-
- <
- <
-
-
- Label
- Popisek
-
-
- >
- >
-
-
- left/right
- vlevo/vpravo
-
-
- above
- nad
-
-
- below
- pod
-
-
- Reverse direction
- Zpětný směr
-
-
- Pixel size-based visibility
- Viditelnost podle velikosti pixelu
-
-
- Labels will not show if larger than this on screen
- Popisky se nezobrazí pokud jsou větší než toto na obrazovce
-
-
- px
- px
-
-
- Labels will not show if smaller than this on screen
- Popisky se nezobrazí pokud jsou menší než toto na obrazovce
-
-
- Label in Map Units
- Popisek v mapových jednotkách
-
Drop shadow
@@ -40634,18 +31662,6 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Offset
Odsazení
-
- Y
- Y
-
-
- Radius blur (rasterizes shadow)
- Poloměrové rozmazání (rasterizuje stín)
-
-
- %
- %
-
Scale
@@ -40659,63 +31675,11 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.Background
Pozadí
-
- Draw under
-
-
- Lowest label component
-
-
- Text
- Text
-
-
- ˚
-
-
- @
- @
-
-
- Blur radius
-
-
- Blur only alpha pixels
-
-
- Select SVG symbol
- Vybrat SVG symbol
-
-
- Fill
- Výplň
-
-
- Size X,Y
- Velikost X,Y
-
Load symbol parameters
Načíst parametry symbolů
-
- % of length
- % délky
-
- Border
- Ohraničení
+ Merge connected lines to avoid duplicate labels
+ Sloučit spojené linie a vyhnout se tak duplicitním popiskám
- outside
- vně
+ Label every part of multi-part features
+ Popisku pro každou část vícedílných prvků
- inside
- uvnitř
+ Feature options
+ Možnosti prvků
- Maximum angle between curved characters
- Maximální úhel mezi zakřivenými znaky
+ Suppress labeling of features smaller than
+ Potlačit popisky prvků menších než
- Above Right
- Napravo nad
+ mm
+ mm
- Above Left
- Nalevo nad
-
-
- Over
- Přes
-
-
- Above
- Nad
-
-
- Below Left
- Nalevo pod
-
-
- Below
- Pod
-
-
- Below Right
- Napravo pod
-
-
- Show all labels for this layer (including colliding labels)
Zobrazit všechny popisky pro tuto vrstvu (včetně kolidujících popisků)
- Show upside-down labels
Zobrazit popisky vzhůru nohama
- never
nikdy
- when rotation defined
když je definovaná rotace
- always
vždy
- Limit number of features to be labeled to
Omezit počet prvků s popisky na
- Number of features sent to labeling engine, though not all may be labeled
Počet prvků odeslaných do popisovače, ačkoliv ne všechny musí být popsány
- Use label background size in collision calculations
- Použít velikost pozadí popisku pro výpočet kolizí
+ Position
+ Umístění
- Buffer transparency
- Průhlednost bufferu
-
-
- X Coordinate
- Souřadnice X
-
-
- Y Coordinate
- Souřadnice Y
-
-
- Horizontal alignment
- Vodorovné zarovnání
-
-
- Vertical alignment
- Svislé zarovnání
-
-
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Odškrtněte pro zápis rotace dle popisovače při přišpendlení a NULL při odšpendlení
- Preserve existing rotation values during label pin/unpin operations
- Zachovat existující hodnoty rotace během operací přišpendlení/odšpendlení
-
-
- Display properties
- Zobrazit vlastnosti
-
-
- Always show
Zobrazit vždy
- Minimum scale
- Minimální měřítko
-
-
- Show label
Zobrazit popisek
-
- Maximum scale
- Maximální měřítko
-
-
- Strikeout
- Přeškrtnutí
-
-
- Capitalization
- Kspitalizace
-
-
- Multi-line align
- Víceřádkové zarovnání
-
-
- Add label columns to attribute table
- Přidat sloupec popisků k atributové tabulce
-
-
- About data defined values
- O daty definovaných hodnotách
-
-
- Label this layer with
- Vytvořit popisky vrstvy z
-
-
- Buffer properties
- Vlastnosti obalové zóny
-
-
- Buffer size
- Velikost obalové zóny
-
-
- Buffer color
- Barva obalové zóny
-
QgsLayerPropertiesWidget
@@ -40969,15 +31839,15 @@ To může být problém vašeho síťového nastavení nebo WMS serveru.
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -40985,270 +31855,60 @@ not displayed
&Add Group
-
&Remove
-
&Show in overview
- &Ukázat přehled
+
Re&name
- Pře&jmenovat
+
Show Feature Count
- Zobrazit počet prvků
+
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
- &Skupina vybrána
-
-
-
- QgsLegend
-
- sub-group
- podskupina
-
-
- group
- skupina
-
-
- &Properties
- &Vlastnosti
-
-
- &Make to Toplevel Item
- &Přesunout nahoru
-
-
- Zoom to Group
- Přiblížit na skupinu
-
-
- &Remove
- &Odebrat
-
-
- &Set Group CRS
- &Nastavit SRS skupiny
-
-
- &Group Selected
- &Skupina vybrána
-
-
- Copy Style
- Kopírovat styl
-
-
- Paste Style
- Vložit styl
-
-
- &Add New Group
- &Přidat novou skupinu
-
-
- &Expand All
- &Rozbalit vše
-
-
- &Collapse All
- &Sbalit vše
-
-
- &Update Drawing Order
- &Aktualizovat pořadí vykreslování
-
-
- Legend
- Legenda
-
-
- &Make to toplevel item
- &Přesunout nahoru
-
-
- Legend context
- Kontext legendy
-
-
- Zoom to group
- Přiblížit na skupinu
-
-
- &Set group CRS
- &Nastavit SRS skupiny
-
-
- Re&name
- Pře&jmenovat
-
-
- &Add group
- &Přidat skupinu
-
-
- &Expand all
- &Rozbalit vše
-
-
- &Collapse all
- &Zabalit vše
-
-
-
- QgsLegendLayer
-
- &Zoom to layer extent
- &Zvětšit na oblast vrstvy
-
-
- &Zoom to best scale (100%)
- &Zoom na nejvhodnější měřítko (100%)
-
-
- &Stretch using current extent
- &Roztáhnout na aktuální rozsah
-
-
- &Show in overview
- &Ukázat přehled
-
-
- &Remove
- &Odstranit
-
-
- &Set layer CRS
- &Nastavit SRS vrstvy
-
-
- Set &project CRS from layer
- Nastavit SRS &projektu z vrstvy
-
-
- &Open attribute table
- &Otevřít atributovou tabulku
-
-
- Save as...
- Uložit jako...
-
-
- Save selection as...
- Uložit výběr jako...
-
-
- &Query...
- &Dotaz...
-
-
- Show feature count
- Zobrazit počet prvků
-
-
- &Zoom to Layer Extent
- &Zvětšit na oblast vrstvy
-
-
- &Zoom to Best Scale (100%)
- &Zoom na nejvhodnější měřítko (100%)
-
-
- &Stretch Using Current Extent
- &Roztáhnout na aktuální rozsah
-
-
- &Show in Overview
- &Ukázat přehled
-
-
- &Duplicate
- &Duplikovat
-
-
- &Set Layer CRS
- &Nastavit SRS vrstvy
-
-
- Set &Project CRS from Layer
- Nastavit SRS &projektu z vrstvy
-
-
- &Open Attribute Table
- &Otevřít atributovou tabulku
-
-
- Save As...
- Uložit jako...
-
-
- Save Selection As...
- Uložit výběr jako...
-
-
- &Filter...
- &Filtr...
-
-
- Show Feature Count
- Zobrazit počet prvků
-
-
- &Properties
- &Vlastnosti
-
-
- Updating feature count for layer %1
- Aktualizuji počet prvků pro vrstvu %1
-
-
- Updating feature count for layer
- Aktualizuji počet prvků pro vrstvu
-
-
- Abort
- Přerušit
+
QgsLegendModel
- Group
Skupina
- No Legend Available
-
@@ -41257,13 +31917,13 @@ not displayed
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Barva
-
- QgsLinearlyScalingDialog
-
- Millimeter
- Milimetr
-
-
- Map units
- Mapové jednotky
-
-
-
- QgsLinearlyScalingDialogBase
-
- Form
- Formulář
-
-
- Scale linearly between 0 and the following attribute value / diagram size:
- Měnit měřítko lineárně mezi 0 a následující hodnotou atributu /velikostí diagramu:
-
-
- Find maximum value
- Najít maximální hodnotu
-
-
- Size
- Velikost
-
-
- Size unit
- Jednotka velikosti
-
-
QgsLoadStyleFromDBDialogLayout
-
- Add column
- Přidat sloupec
-
Styles related to the layer
-
Other styles on the database
-
Cancel
- Storno
+
Load Style
- Načíst styl
+
QgsManageConnectionsDialog
-
- Load from file
- Načíst ze souboru
-
-
- Load
- Načíst
-
-
- Save
- Uložit
-
-
- Save connections
- Uložit připojení
-
-
- XML files (*.xml *.XML)
- XML soubory (*.xml *.XML)
-
-
- Load connections
- Načíst připojení
-
-
- XML files (*.xml *XML)
- XML soubory (*.xml *.XML)
-
Select all
@@ -41415,6 +32007,16 @@ not displayed
You should select at least one connection from list.
Měli byste vybrat aspoň jedno připojení ze seznamu.
+
+ Save connections
+ Uložit připojení
+
+
+ XML files (*.xml *.XML)
+ XML soubory (*.xml *.XML)
+
Saving connections
@@ -41515,10 +32117,6 @@ not displayed
Connection with name '%1' already exists. Overwrite?
Připojení nazvané '%1' už existuje. Přepsat?
-
- Connection with name %1 already exists. Overwrite?
- Připojení nazvané %1 už existuje. Přepsat?
-
QgsManageConnectionsDialogBase
@@ -41532,49 +32130,24 @@ not displayed
Select connections to export
Vyberte připojení k exportu
-
- Save to file
- Uložit do souboru
-
-
- Browse
- Procházet
-
QgsMapCanvas
- canvas
-
- Canvas refresh: %1 ms
- Obnovení mapového okna: %1 ms
-
-
- , sender '%1'
- , odesílatel '%1'
-
-
- Rendering
Vykreslování
- Could not draw %1 because:
-%2
- COMMENTED OUT
- Nemohu vykreslit %1 protože:
-%2
-
-
- Could not draw %1 because:
-%2
- Nemohu vykreslit %1 protože:
-%2
+ Canvas refresh: %1 ms
+
@@ -41607,14 +32180,6 @@ not displayed
Y / North:
Y / Sever:
-
- X:
- X:
-
-
- Y:
- Y:
-
Snap to background layers
@@ -41623,6 +32188,12 @@ not displayed
QgsMapLayer
+
+ Specify CRS for layer %1
+ Určit CRS pro vrstvu %1
+
%1 at line %2 column %3
%1 na řádku %2 sloupec %3
-
- Style not found in database
-
Error: qgis element could not be found in %1
Chyba: qgis prvek nemohl být nalezen v %1
+
+ Loading style file %1 failed because:
+%2
+ Načítání souboru stylu %1 selhalo, protože:
+%2
+
+
+ Could not save symbology because:
+%1
+ Nemohu uložit symbologii protože:
+%1
+
+
+ The directory containing your dataset needs to be writable!
+ Adresář obsahující Váš dataset potřebuje mít práva zápisu!
+
+
+ Style not found in database
+
+
+ Created default style file as %1
+ Vytvořen výchozí styl jako %1
+
+
+ ERROR: Failed to created default style file as %1. Check file permissions and retry.
+ CHYBA: Selhalo vytvoření souboru výchozího stylu jako %1. Zkontrolujte oprávnění souboru a zkuste znovu.
+
User database could not be opened.
@@ -41680,49 +32284,6 @@ not displayed
Unable to open file %1
Nemohu otevřít soubor %1
-
- style not found in database
- styl nebyl nalezen v databázi
-
-
- Specify CRS for layer %1
- Určit CRS pro vrstvu %1
-
-
- Loading style file %1 failed because:
-%2
- Načítání souboru stylu %1 selhalo, protože:
-%2
-
-
- Could not save symbology because:
-%1
- Nemohu uložit symbologii protože:
-%1
-
-
- The directory containing your dataset needs to be writable!
- Adresář obsahující Váš dataset potřebuje mít práva zápisu!
-
-
- Created default style file as %1
- Vytvořen výchozí styl jako %1
-
-
- ERROR: Failed to created default style file as %1. Check file permissions and retry.
- CHYBA: Selhalo vytvoření souboru výchozího stylu jako %1. Zkontrolujte oprávnění souboru a zkuste znovu.
-
QgsMapRenderer
@@ -41746,14 +32307,6 @@ not displayed
add feature
přidat prvek
-
- Not a vector layer
- Není vektorová vrstva
-
-
- The current layer is not a vector layer
- Aktuálně zvolená vrstva není vektorovou vrstvou
-
Layer cannot be added to
@@ -41764,14 +32317,6 @@ not displayed
The data provider for this layer does not support the addition of features.
Přístup k datům pro tuto vrstvu nedovoluje přidání prvků.
-
- Layer not editable
- Vrstva není editovatelná
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Nemohu editovat vektorovou vrstvu. Použijte "Přepnout editaci" aby byla vrstva editovatelná.
-
Cannot transform the point to the layers coordinate system
Nelze trasformovat bod do souřadného systému vrstvy
-
- Feature added
- Prvek přidán
-
Cannot apply the 'capture line' tool on this vector layer
@@ -41846,83 +32387,8 @@ not displayed
Tento prvek nemůže být přidán protože jeho geometrie se zbortila kvůli snaze vyvarovat se protnutí
-
- QgsMapToolAddIsland
-
- Not a vector layer
- Není vektorová vrstva
-
-
- The current layer is not a vector layer
- Aktuálně zvolená vrstva není vektorovou vrstvou
-
-
- Layer not editable
- Vrstva není editovatelná
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Nemohu editovat vektorovou vrstvu. Použijte "Přepnout editaci" aby byla vrstva editovatelná.
-
-
- No feature selected. Please select a feature with the selection tool or in the attribute table
- Žádný prvek nevybrán. Vyberte prosím prvek nástrojem výběru nebo v atributové tabulce
-
-
- Several features are selected. Please select only one feature to which an island should be added.
- Vybráno několik prvků. Vyberte prosím pouze jeden prvek, ke kterému bude přidán ostrov.
-
-
- Error, could not add island
- Chyba, nelze přidat ostrov
-
-
- Coordinate transform error
- Chyba při transformování souřadnic
-
-
- Cannot transform the point to the layers coordinate system
- Nelze trasformovat bod do souřadného systému vrstvy
-
-
- Part added
- Část přidána
-
-
- Selected feature is not a multipolygon
- Vybraný prvek není multipolygon
-
-
- New ring is not a valid geometry
- nový prstenec není platná geometrie
-
-
- New polygon ring not disjoint with existing polygons
- Nový polygon není disjunkční s existujícími polygony
-
-
- Selected geometry could not be found
- Vybraná geometrie nemohla být nalezena
-
-
QgsMapToolAddPart
-
- Not a vector layer
- Není vektorová vrstva
-
-
- The current layer is not a vector layer
- Aktuálně zvolená vrstva není vektorovou vrstvou
-
-
- Layer not editable
- Vrstva není editovatelná
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Nemohu editovat vektorovou vrstvu. Použijte "Přepnout editaci" aby byla vrstva editovatelná.
-
Several features are selected. Please select only one feature to which an part should be added.
Je vybráno více prvků. Vyberte prosím pouze jeden prvek, ke kterému se část přidá.
-
- Error. Could not add part.
- Chyba, nelze přidat část.
-
Part added
Část přidána
-
- Coordinate transform error
- Chyba při transformování souřadnic
-
-
- Cannot transform the point to the layers coordinate system
- Nelze trasformovat bod do souřadného systému vrstvy
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected geometry could not be found
Vybraná geometrie nemohla být nalezena
-
- Error, could not add part
- Chyba, nelze přidat část
-
QgsMapToolAddRing
-
- Not a vector layer
- Není vektorová vrstva
-
-
- The current layer is not a vector layer
- Aktuálně zvolená vrstva není vektorovou vrstvou
-
-
- Layer not editable
- Vrstva není editovatelná
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Nemohu editovat vektorovou vrstvu. Použijte "Přepnout editaci" aby byla vrstva editovatelná.
-
Coordinate transform error
@@ -42061,13 +32495,6 @@ not displayed
Chyba, nelze přidat prstenec
-
- QgsMapToolAddVertex
-
- Added vertex
- Lomový bod přidán
-
-
QgsMapToolCapture
@@ -42083,10 +32510,6 @@ not displayed
QgsMapToolChangeLabelProperties
-
- Label properties changed
- Vlastnosti popisku změněny
-
Changed properties for label
@@ -42095,14 +32518,6 @@ not displayed
QgsMapToolDeletePart
-
- Delete part
- Smazat část
-
-
- This isn't a multipart geometry.
- Toto není vícedílná geometrie.
-
Part of multipart feature deleted
@@ -42119,12 +32534,12 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
Prstenec smazán
-
- QgsMapToolDeleteVertex
-
- Vertex deleted
- Lomový bod smazán
-
-
QgsMapToolEdit
@@ -42147,19 +32555,11 @@ not displayed
No active vector layer
Žádná aktivní vektorová vrstva
-
- Choose a vector layer in the legend
- Vyberte vektorovou vrstvu v legendě
-
Layer not editable
Vrstva není editovatelná
-
- Use 'Toggle Editing' to make it editable
- Použijte 'Přepnout editaci' pro aktivování editace vrstvy
-
QgsMapToolFeatureAction
@@ -42194,69 +32594,65 @@ not displayed
Coordinate transform error
- Chyba při transformování souřadnic
+
Cannot transform the point to the layers coordinate system
- Nelze trasformovat bod do souřadného systému vrstvy
+
Ring added and filled
-
A problem with geometry type occured
- Objevil se problém s typem geometrie
+
The inserted Ring is not closed
- Vložený prstenec není uzavřený
+
The inserted Ring is not a valid geometry
- Vložný prstenec nemá platnou geometrii
+
The inserted Ring crosses existing rings
- Vložený prstenec kříží už existující prstence
+
The inserted Ring is not contained in a feature
- Vložený prstenec není obsažený v prvku
+
An unknown error occured
- Objevila se neznámá chyba
+
Error, could not add ring
- Chyba, nelze přidat prstenec
+
QgsMapToolIdentify
- (clicked coordinate)
- (označené souřadnice)
+ All (%1)
+
- No active layer
- Žádná aktivní vrstva
-
-
- To identify features, you must choose an active layer by clicking on its name in the legend
- K identifikaci objektů, je potřeba vybrat aktivní vrstvu kliknutím na její jméno v legendě
+ No active layer. To identify features, you must choose an active layer.
+ Žádná aktivní vrstva. K identifikaci objektů, je potřeba vybrat aktivní vrstvu.
Identifikace dokončena.
- No features at this position found.
- Nenalezeny žádné prvky na této pozici.
+ (clicked coordinate)
+ (označené souřadnice)
+
+
+ feature id
+ id prvku
+
+
+ new feature
+ nový prvek
Identify error
-
-
- feature id
- id prvku
-
-
- All (%1)
-
-
- No active layer. To identify features, you must choose an active layer.
- Žádná aktivní vrstva. K identifikaci objektů, je potřeba vybrat aktivní vrstvu.
-
-
- new feature
- nový prvek
-
-
- WMS layer
- WMS vrstva
-
-
- Feature info
- Info o prvku
-
-
- Raster
- Rastr
+
@@ -42368,14 +32744,6 @@ not displayed
QgsMapToolMoveFeature
-
- Layer not editable
- Vrstva není editovatelná
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Nemohu editovat vektorovou vrstvu. Použijte "Přepnout editaci" aby byla vrstva editovatelná.
-
Feature moved
@@ -42384,39 +32752,18 @@ not displayed
QgsMapToolMoveLabel
-
- Label moved
- Popisek přesunut
-
Moved label
Popisek přesunut
-
- QgsMapToolMoveVertex
-
- Vertex moved
- Lomový bod přesunut
-
-
QgsMapToolNodeTool
-
- Node tool
- Nástroj uzlů
-
-
- Feature was deleted on background.
-
- Prvek byl smazán na pozadí.
-
-
could not snap to a segment on the current layer.
-
QgsMapToolReshape
-
- Not a vector layer
- Není vektorová vrstva
-
-
- The current layer is not a vector layer
- Aktuálně zvolená vrstva není vektorovou vrstvou
-
-
- Layer not editable
- Vrstva není editovatelná
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Nemohu editovat vektorovou vrstvu. Použijte "Přepnout editaci" aby byla vrstva editovatelná.
-
Coordinate transform error
@@ -42504,10 +32835,6 @@ not displayed
QgsMapToolRotateLabel
-
- Label rotated
- Popisek otočen
-
Rotated label
@@ -42542,25 +32869,6 @@ not displayed
Rotovat smybol
-
- QgsMapToolSelect
-
- No active layer
- Žádná aktivní vrstva
-
-
- To select features, you must choose a vector layer by clicking on its name in the legend
- Pro vybrání prvku, musíte vybrat vektorovou vrstvu kliknutím na její jméno v legendě
-
-
- CRS Exception
- Výjimka CRS
-
-
- Selection extends beyond layer's coordinate system.
- Výběr přesahuje mimo souřadnicový systém vrstvy.
-
-
QgsMapToolShowHideLabels
@@ -42600,46 +32908,6 @@ not displayed
QgsMapToolSplitFeatures
-
- Split error
- Chyba rozdělení
-
-
- An error occured during feature splitting
- Nastala chyba při rozdělování objektu
-
-
- No feature split done
- Žádné prvky nerozděleny
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Nemohu editovat vektorovou vrstvu. Použijte "Přepnout editaci" aby byla vrstva editovatelná.
-
-
- Features split
- Rozdělení prvků
-
-
- If there are selected features, the split tool only applies to the selected ones. If you like to split all features under the split line, clear the selection
- Pokud jsou vybrány objekty, nástroj na rozdělení pracuje pouze s nimi. Pokud chcete rozdělit všechny prvky pod linií rozdělení, vyčistěte výběr
-
-
- Not a vector layer
- Není vektorová vrstva
-
-
- The current layer is not a vector layer
- Aktuálně zvolená vrstva není vektorovou vrstvou
-
-
- Layer not editable
- Vrstva není editovatelná
-
Coordinate transform error
@@ -42650,107 +32918,96 @@ not displayed
Cannot transform the point to the layers coordinate system
Nelze trasformovat bod do souřadného systému vrstvy
+
+ Features split
+ Rozdělení prvků
+
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
+
+ No feature split done
+ Žádné prvky nerozděleny
+
+
+ An error occured during splitting.
+
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
Geometrie je neplatná. Opravte ji prosím před pokusem o její rozdělení.
-
- An error occured during splitting.
-
QgsMapToolSplitParts
Coordinate transform error
- Chyba při transformování souřadnic
+
Cannot transform the point to the layers coordinate system
- Nelze trasformovat bod do souřadného systému vrstvy
+
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
- Geometrie je neplatná. Opravte ji prosím před pokusem o její rozdělení.
+
Split error
- Chyba rozdělení
-
-
- An error occured during feature splitting
- Nastala chyba při rozdělování objektu
-
-
-
- QgsMapToolVertexEdit
-
- Snap tolerance
- Tolerance uchopení
-
-
- Don't show this message again
- Příště zprávu nezobrazovat
-
-
- Could not snap segment.
- Nelze uchopit segment.
-
-
- Have you set the tolerance in Settings > Project Properties > General?
- Nastavili jste toleranci v Nastavení > Vlastnosti projektu > Obecné?
+
@@ -42758,211 +33015,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
-
-
- QgsMapserverExportBase
-
- Map file
- Mapový soubor
-
-
- Map
- Mapa
-
-
- Name
- Název
-
-
- Height
- Výška
-
-
- Width
- Šírka
-
-
- Units
- Jednotky
-
-
- Image type
- Typ obrázku
-
-
- Forces labels on, regardless of collisions. Available only for cached labels.
- Vynutí zapnutí popisek bez ohledu na kolize. Dostupné pouze pro popisky ve vyrovnávací paměti.
-
-
- Check to allow MapServer to return data in GML format. Useful when used with WMS GetFeatureInfo operations.
- Zaškrtněte pro povolení MapServeru k vrácení dat v GML formátu. Vhodné pro využití s operacemi WMS GetFeatureInfo.
-
-
- Force
- Vynutit
-
-
- MapServer Export: Save project to MapFile
- MapServer Export: Uložit projekt do MapFile
-
-
- Use current project
- Použít aktuální projekt
-
-
- LAYER information only
- Pouze informace VRSTVY
-
-
- Rendering
- Vykreslování
-
-
- The URL to the mapserver executable.
-
-For example:
-http://my.host.com/cgi-bin/mapserv.exe
- URL ke spustitelnému souboru mapserveru.
-
-Např.:
-http://my.host.com/cgi-bin/mapserv.exe
-
-
- Inline
- V řadě
-
-
- Symbolset
- Sada symbolů
-
-
- Use templates
- Použít šablony
-
-
- The file name of the fonts file.
- Název souboru s písmy.
-
-
- Fontset
- Sada písem
-
-
- The file name of the symbols file.
- Název souboru se symboly.
-
-
- Layer/label options
- Možnosti vrstvy/popisky
-
-
- Should text be antialiased? Note that this requires more available colors, decreases drawing performance, and results in slightly larger output images.
- Má být text vyhlazený? Uvědomte si, že to vyžaduje více dostupných barev, snižuje výkon vykreslování a způsobuje poněkud větší výstupní obrázky.
-
-
- Anti-alias
- Vyhlazování
-
-
- Can text run off the edge of the map?
- Může text přetéct přes okraj mapy?
-
-
- Partials
- Části
-
-
- Dump
- Výpis
-
-
- Paths
- Cesty
-
-
- MapServer url
- MapServer url
-
-
- Header
- Hlavička
-
-
- Footer
- Patička
-
-
- Template
- Šablona
-
-
- Name for the map file to be created from the QGIS project file
- Název souboru mapy vytvořeného na základě souboru projektu QGISu
-
-
- If checked, only the layer information will be processed
- V případě kontroly budou zpracovány pouze informace o vrstvě
-
-
- Path to the MapServer template file
- Cesta k souboru s MapServer šablonou
-
-
- Prefix attached to map, scalebar and legend GIF filenames created using this MapFile
- Prefix pro mapy, měřítko a legendu v souborech GIF vytvořených pomocí tohoto MapFile
-
-
- Full path to the QGIS project file to export to MapServer map format
- Úplná cesta k souboru s projektem QGIS pro export do formátu MapServer
-
-
- Browse...
- Procházet...
-
-
- Save As...
- Uložit jako...
-
-
- meters
- metry
-
-
- dd
- dd
-
-
- feet
- stopy
-
-
- miles
- míle
-
-
- inches
- palce
-
-
- kilometers
- kilometry
+
@@ -42972,14 +33040,14 @@ http://my.host.com/cgi-bin/mapserv.exe
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -43024,10 +33092,6 @@ http://my.host.com/cgi-bin/mapserv.exe
Segments
Segmenty
-
- Ellipsoidal
- Elipsoidální
-
QgsMeasureDialog
@@ -43039,79 +33103,63 @@ http://my.host.com/cgi-bin/mapserv.exe
The calculations are based on:
- Výpočty jsou založeny na:
Project CRS transformation is turned off.
- SRS transformace projektu je vypnuta.
Canvas units setting is taken from project properties setting (%1).
- Nastavení jednotek mapového okna se bere z nastavení vlastností projektu (%1).
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
- Nastavení jednotek mapového okna se bere z SRS projektu (%1).
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
Segmentů [%1]
-
- Segments (in meters)
- Segmenty (v metrech)
-
-
- Segments (in feet)
- Segmenty (v stopách)
-
-
- Segments (in degrees)
- Segmenty (v stupních)
-
-
- Segments
- Segmenty
-
QgsMeasureTool
@@ -43147,46 +33195,51 @@ http://my.host.com/cgi-bin/mapserv.exe
Date
- Datum
+
Whole number (smallint - 16bit)
- Celé číslo (smallint - 16bit)
+
Whole number (integer - 32bit)
- Celé číslo (integer - 32bit)
+
Whole number (integer - 64bit)
- Celé číslo (integer - 64bit)
+
Decimal number (numeric)
- Desetinné číslo (numeric)
+
Decimal number (decimal)
- Desetinné číslo (decimal)
+
Decimal number (double)
- Desetinné číslo (double)
+
Text, unlimited length (text)
- Text, neomezená délka (text)
+
QgsMergeAttributesDialog
+
+ Skip attribute
+ Přeskočit prvek
+
Id
@@ -43198,19 +33251,15 @@ http://my.host.com/cgi-bin/mapserv.exe
Sloučit
- feature %1
- prvek %1
+ Feature %1
+ Prvek %1
Minimum
Minimum
-
- Feature %1
- Prvek %1
-
Maximum
@@ -43236,11 +33285,6 @@ http://my.host.com/cgi-bin/mapserv.exe
Mean
Průměr
-
- Skip attribute
- Přeskočit prvek
-
Skipped
@@ -43286,15 +33330,7 @@ http://my.host.com/cgi-bin/mapserv.exe
%n more
unread messages
-
-
-
-
- more
- více
+
@@ -43354,7 +33390,7 @@ http://my.host.com/cgi-bin/mapserv.exe
Show non-spatial tables
-
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Připojení selhalo - nebyl zadán název hostitele.
@@ -43440,7 +33476,7 @@ http://my.host.com/cgi-bin/mapserv.exe
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Připojení selhalo - nebyl zadán název databáze.
@@ -43632,10 +33668,6 @@ http://my.host.com/cgi-bin/mapserv.exe
QgsMssqlSourceSelect
-
- Add MS SQL Table(s)
- Přidat MS SQL tabulku/y
-
Add MSSQL Table(s)
@@ -43646,14 +33678,6 @@ http://my.host.com/cgi-bin/mapserv.exe
&Add
&Přidat
-
- &Build query
- &Vytvořit dotaz
-
-
- Build query
- Vytvořit dotaz
-
&Set Filter
@@ -43965,18 +33989,6 @@ enhancement
Blue band
Modré pásmo
-
- Min
- Min
-
-
- Max
- Max
-
-
- Contrast enhancement
- Vylepšení kontrastu
-
QgsNetworkAccessManager
@@ -44009,27 +34021,27 @@ enhancement
all
- vše
+
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
QgsNewHttpConnectionBase
- Name
- Název
+ Create a new WMS connection
+ Vytvořit nové WMS spojení
+
+
+ Connection details
+ Podrobnosti spojení
+
+
+ DPI-Mode
+
URL
URL
-
- DPI-Mode
-
If the service requires basic authentication, enter a user name and optional password
Pokud služba vyžaduje základní autentifikaci, zadejte uživatelské jméno a případně heslo
+
+ Password
+ Heslo
+
+
+ &User name
+ &Uživatelské jméno
+
+
+ Name
+ Název
+
Name of the new connection
@@ -44104,11 +34136,7 @@ Poznámka: zadání hesla je volitelné. Bude požadováno interaktivně, pokud
Ignore GetMap/GetTile URI reported in capabilities
-
-
- Ignore GetMap URI reported in capabilities
- Ignorovat GetMap URI hlášené ve schopnostech
+
Smooth pixmap transform
-
Referer
Referer
-
- Create a new WMS connection
- Vytvořit nové WMS spojení
-
-
- Connection details
- Podrobnosti spojení
-
-
- If the WMS requires basic authentication, enter a user name and optional password
- Pokud WMS požaduje základní autentizaci, zadejte uživatelské jméno a případně heslo
-
-
- &User name
- &Uživatelské jméno
-
-
- Password
- Heslo
-
QgsNewOgrConnection
@@ -44207,33 +34211,16 @@ Rozšířené informace o chybě:
Type
Typ
-
- Save Password
- Uložit heslo
-
-
- &Test Connect
- &Test připojení
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Type</span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Type</span></p></body></html>
-
Name
Název
+
+ Name of the new connection
+ Název nového spojení
+
Host
@@ -44260,9 +34247,14 @@ p, li { white-space: pre-wrap; }
Heslo
- Name of the new connection
- Název nového spojení
+ Save Password
+ Uložit heslo
+
+
+ &Test Connect
+ &Test připojení
@@ -44288,13 +34280,9 @@ p, li { white-space: pre-wrap; }
Nový soubor databáze SpatiaLite
- SpatiaLite (*.sqlite *.db )
- SpatiaLite (*.sqlite *.db )
-
-
- Unable to initialize SpatialMetadata:
-
- Nemohu spustit SpatialMetadata:
+ SpatiaLite
+ SpatiaLite
SpatiaLite Database
SpatiaLite databáze
-
- Could not copy the template database to new location
- Nemohu zkopírovat šablonu databáze do nového umístění
-
-
- Could not create a new database
-
- Nemohu vytvořit novou databázi
-
-
-
- Unable to activate FOREIGN_KEY constraints
- Nemohu aktivovat omezení FOREIGN_KEY
-
-
- SpatiaLite
- SpatiaLite
-
Unable to open the database
@@ -44480,20 +34449,6 @@ p, li { white-space: pre-wrap; }
Multipolygon
Multipolygon
-
- Specify CRS
- Určit SRS
-
-
- Remove attribute
- Odstranit atribut
-
-
- EPSG SRID
- EPSG SRID
-
Spatial Reference Id
@@ -44506,8 +34461,9 @@ p, li { white-space: pre-wrap; }
Určete souřadnicový referenční systém geometrie vrstvy.
- Find SRID
- Najít SRID
+ Specify CRS
+ Určit SRS
An attribute name
Název atributu
-
- Attributes list
- Seznam atributů
-
Add attribute to list
@@ -44550,14 +34501,20 @@ p, li { white-space: pre-wrap; }
Add to attributes list
Přidat do seznamu atributů
+
+ Attributes list
+ Seznam atributů
+
Delete selected attribute
Smazat vybrané atributy
- Remove selected attribute
- Odstranit vybrané atributy
+ Remove attribute
+ Odstranit atribut
@@ -44580,7 +34537,7 @@ p, li { white-space: pre-wrap; }
Date
- Datum
+
Comma Separated Value
- Hodnoty oddělené čárkou
+
GML
-
Mapinfo File
- MapInfo soubory
+
Save layer as...
- Uložit vrstvu jako...
-
-
- Save As
- Uložit jako
+
@@ -44670,20 +34623,6 @@ p, li { white-space: pre-wrap; }
Precision
Přesnost
-
- Remove attribute
- Odstranit atribut
-
-
- File encoding
-
-
- Remove selected attribute
- Odstranit vybraný atribut
-
Add attribute to list
@@ -44695,8 +34634,19 @@ p, li { white-space: pre-wrap; }
Přidat do seznamu atributů
- CRS ID
- SRS ID
+ Attributes list
+ Seznam atributů
+
+
+ Delete selected attribute
+ Smazat vybrané atributy
+
+
+ Remove attribute
+ Odstranit atribut
Určit SRS
- Attributes list
- Seznam atributů
-
-
- Delete selected attribute
- Smazat vybrané atributy
-
-
-
- QgsNorthArrowPlugin
-
- Bottom Left
- Vlevo dole
-
-
- Top Right
- Vpravo nahoře
-
-
- Bottom Right
- Vpravo dole
-
-
- &Decorations
- &Dekorace
-
-
- Creates a north arrow that is displayed on the map canvas
- Vytvoří směrovou růžici a zobrazí ji v mapovém okně
-
-
- Top Left
- Vlevo nahoře
-
-
- &North Arrow
- &Směrová růžice
-
-
- North arrow pixmap not found
- Pixmapa směrové růžice nebyla nalezena
-
-
-
- QgsNorthArrowPluginGui
-
- Pixmap not found
- Pixmapa nebyla nalezena
-
-
-
- QgsNorthArrowPluginGuiBase
-
- North Arrow Plugin
- Zásuvný modul pro tvorbu směrové růžice
-
-
- Angle
- Úhel
-
-
- Placement
- Umístění
-
-
- Set direction automatically
- Nastavit směr automaticky
-
-
- Enable North Arrow
- Zapnout směrovou růžici
-
-
- Top Left
- Vlevo nahoře
-
-
- Top Right
- Vpravo nahoře
-
-
- Bottom Left
- Vlevo dole
-
-
- Bottom Right
- Vpravo dole
-
-
- Placement on screen
- Umístění na obrazovce
-
-
- Preview of north arrow
- Náhled směrové růžice
-
-
-
- QgsOGRSublayersDialog
-
- Layer ID
- ID vrstvy
-
-
- Layer name
- Název vrstvy
-
-
- Nb of features
- Počet prvků
-
-
- Geometry type
- Geometrický typ
-
-
-
- QgsOGRSublayersDialogBase
-
- Select OGR layers to load
- Vyberte OGR vrstvy pro načtení
-
-
- Sub layers list
- Seznam podvrstev
-
-
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';">This is the list of all layers available in the datasource of the active layer. You can select the layers to load. The layers will be loaded when you press "OK".</p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p>
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';">The layer name is format dependent. Consult the OGR documentation or the documentation of your data format to determine the nature of the included information.</p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p>
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"><span style=" font-weight:600;">Be advised: </span>selecting an already opened layer will not generate an error message and the layer will end up loaded twice!</p></body></html>
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';">Toto je seznam všech vrstev dostupných v datovém zdroji aktivní vrstvy. Můžete vybrat vrstvy k načtení. Vrstvy budou načteny po stisku "OK".</p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p>
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';">Název vrstvy závisí na formátu. Konzultujte dokumentaci OGR nebo dokumentaci vašeho formátu dat ke zjištění povahy zahrnuté informace.</p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p>
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"><span style=" font-weight:600;">Berte na vědomí: </span>vybrání už otevřené vrstvy nevytvoří chybovou zprávu a vrstva bude načtena dvakrát!</p></body></html>
-
-
- Select layers to load
- Vyberte vrstvy k načtení
-
-
- 1
- 1
-
-
-
- QgsOSMDataProvider
-
- Open Street Map format
- Formát OpenStreetmap
+ File encoding
+
@@ -44949,12 +34742,12 @@ p, li { white-space: pre-wrap; }
Could not transform canvas extent.
-
Could not transform layer extent.
-
Export has been successful.
Export byl úspěšný.
-
- OpenStreetMap import
- OpenStreetMap import
-
Failed to export OSM data:
@@ -45183,7 +34972,7 @@ p, li { white-space: pre-wrap; }
Add Layer(s) from a %1 Server
-
Coordinate Reference System (%n available)
crs count
-
- Souřadnicový referenční systém (%n dostupný)
- Souřadnicové referenční systémy (%n dostupné)
- Souřadnicové referenční systémy (%n dostupných)
-
+ Souřadnicový referenční systém (%n dostupný) Souřadnicové referenční systémy (%n dostupné) Souřadnicové referenční systémy (%n dostupných)
network error: %1
chyba sítě: %1
-
- The %1 connection already exists. Do you want to overwrite it?
- Připojení %1 již existuje. Chcete ho přepsat?
-
-
- Confirm Overwrite
- Potvrdit přepsání
-
QgsOWSSourceSelectBase
@@ -45380,10 +35157,6 @@ p, li { white-space: pre-wrap; }
Time
Čas
-
- Coordinate Reference System
- Souřadnicový referenční systém
-
Coordinate Reference System:
@@ -45442,7 +35215,7 @@ Prefer network: default value; load from the network if the cached entry is olde
Always network: always load from network and do not check if the cache has a valid entry (similar to the "Reload" feature in browsers)
-
Could not open the spatialite database
Nemohu otevřít spatialite databázi
-
- Could not copy the template database to new location
- Nemohu zkopírovat šablonu databáze do nového umístění
-
Unable to initialize SpatialMetadata:
@@ -45565,34 +35334,6 @@ Always network: always load from network and do not check if the cache has a val
QGIS wkbType %1 not supported
QGIS wkbType %1není podporován
-
- %v / %m features copied
- %v / %m prvků zkopírováno
-
-
- %v / %m features processed
- %v / %m prvků zpracováno
-
-
- %v / %m fields added
- %v / %m polí přidáno
-
-
- %v / %m features added
- %v / %m prvků přidáno
-
-
- %v / %m features removed
- %v / %m prvků odstraněno
-
-
- %v / %m feature updates
- %v / %m aktualizace prvků
-
-
- %v / %m feature geometry updates
- %v / %m aktualizace geometrie prvků
-
Offline Editing Plugin
@@ -45687,10 +35428,6 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
Vyberte cílovou databázi pro offline data
-
- SpatiaLite DB(*.sqlite);;All files(*.*)
- SpatiaLite DB(*.sqlite);;Všechny soubory(*.*)
-
SpatiaLite DB
@@ -45788,10 +35525,9 @@ Always network: always load from network and do not check if the cache has a val
QgsOgrProvider
- Data source is invalid (%1)
- Zdroj dat je neplatný (%1)
+ Data source is invalid, no layer found (%1)
+ Zdroj dat je neplatný, nenalezena žádná vrstva (%1)
OGR
- Data source is invalid, no layer found (%1)
- Zdroj dat je neplatný, nenalezena žádná vrstva (%1)
+ Data source is invalid (%1)
+ Zdroj dat je neplatný (%1)
Unknown
Neznámý
-
- Read attempt on an invalid OGR data source
- Pokus o čtení na neplatném datovém zdroji OGR
-
OGR error creating wkb for feature %1: %2
@@ -45916,7 +35649,7 @@ Always network: always load from network and do not check if the cache has a val
OGR error syncing to disk: %1
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
QgsOpenRasterDialog
+
+ Open raster
+ Otevřít rastr
+
+
+ Raster file:
+ Rastrový soubor:
+
+
+ ...
+ ...
+
+
+ Save raster as:
+ Uložit rastr jako:
+
Choose a name of the raster
@@ -45994,27 +35748,6 @@ Always network: always load from network and do not check if the cache has a val
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-modifikováno
-
- Open raster
- Otevřít rastr
-
-
- Raster file:
- Rastrový soubor:
-
-
- ...
- ...
-
-
- Save raster as:
- Uložit rastr jako:
-
QgsOpenVectorLayerDialog
@@ -46171,10 +35904,6 @@ Always network: always load from network and do not check if the cache has a val
Options Dialog Template
Šablona dialogu možností
-
- Section
- Sekce
-
GroupBox
@@ -46183,54 +35912,10 @@ Always network: always load from network and do not check if the cache has a val
QgsOptions
-
- Semi transparent circle
- Částečně průhledný kruh
-
-
- Cross
- Kříž
-
-
- Detected active locale on your system: %1
- Zjištěné jazykové nastavení vašeho systému: %1
-
-
- None
- Žádná
-
-
- map units
- mapových jednotek
-
-
- Current layer
- Aktuální vrstva
-
-
- Top down, stop at first
- Shora dolů, zastavit na první
-
-
- Top down
- Shora dolů
-
Identify highlight color
-
Show selected features
Zobrazit vybrané prvky
-
- Show features in current canvas
- Zobrazit prvky v aktuálním mapovém okně
-
Always
@@ -46291,10 +35972,6 @@ Always network: always load from network and do not check if the cache has a val
No
Ne
-
- Passthru
- Projít skrz
-
Basic scan
@@ -46305,96 +35982,6 @@ Always network: always load from network and do not check if the cache has a val
Full scan
Kompletní sken
-
- Choose project file to open at launch
- Vyberte soubor projektu, který se otevře při startu
-
-
- QGis files
- QGis soubory
-
-
- Overwrite
- Přepsat
-
-
- If Undefined
- Pokud není definováno
-
-
- Unset
- Nenastaveno
-
-
- Prepend
- Předřadit
-
-
- Append
- Připojit
-
-
- Enter scale
- Zadejte měřítko
-
-
- Scale denominator
- Jmenovatel měřítka
-
-
- Load scales
- Načíst měřítka
-
-
- XML files (*.xml *.XML)
- XML soubory (*.xml *.XML)
-
-
- Save scales
- Uložit měřítka
-
-
- No Stretch
- Bez protažení
-
-
- Stretch To MinMax
- Protažení podle MinMax
-
-
- Stretch And Clip To MinMax
- Protažení a ořezání podle MinMax
-
-
- Clip To MinMax
- Ořezání podle MinMax
-
-
- To vertex
- K lomovému bodu
-
-
- None / Planimetric
- Žádný / Planimetrický
-
Průměr +/- směrodatná odchylka
- Select grid color
+
+
+ Solid
+
+
+ Dots
+
+
+ Crosses
+
+
+ Detected active locale on your system: %1
+ Zjištěné jazykové nastavení vašeho systému: %1
+
+
+ To vertex
+ K lomovému bodu
+
+
+ To segment
K segmentu
- To vertex and segment
K lomovému bodu a segmentu
- map units
+ mapových jednotek
+
+
+ pixels
pixelů
- Semi transparent circle
+ Částečně průhledný kruh
+
+
+ Cross
+ Kříž
+
+
None
+ Žádná
+
+
+ QGIS files
+ QGis soubory
+
+
+ Off
Vypnuto
- All
- Vše
-
-
- Select grid color
- Vybrat barvu mřížky
-
-
- Solid
- Plný
-
-
- Dots
- Tečky
-
-
- Crosses
-
-
- QGIS
QGIS
- GEOS
GEOS
- Round
Kulatý
- Mitre
Pokos
- Bevel
Zaoblený
- Central point (fastest)
- Centrální bod (nejrychlejší)
-
-
- Chain (fast)
- Chain (rychlý)
-
-
- Popmusic tabu chain (slow)
- Popmusic tabu chain (pomalý)
-
-
- Popmusic tabu (slow)
- Popmusic tabu (pomalý)
-
-
- Popmusic chain (very slow)
- Popmusic chain (velmi pomalý)
-
-
- Save default project
Uložit výchozí projekt
- You must set a default project
Musíte nastavit výchozí projekt
- Current project saved as default
Aktuální projekt uložen jako výchozí
- Error saving current project as default
Chyba při ukládání projektu jako výchozího
- Choose a directory to store project template files
Vyberte složku pro ukládání souborů šablon projektů
@@ -46543,78 +36148,127 @@ Always network: always load from network and do not check if the cache has a val
Zobrazit prvky viditelné na mapě
- QGIS files
- QGis soubory
+ Choose project file to open at launch
+ Vyberte soubor projektu, který se otevře při startu
- Create Options - %1 Driver
Vytvořit možnosti - %1 Ovladač
- Create Options - pyramids
Vytvořit možnosti - pyramidy
- Restore UI defaults
-
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
+ Přepsat
+
+
+ If Undefined
+ Pokud není definováno
+
+
+ Unset
+ Nenastaveno
+
+
+ Prepend
+ Předřadit
+
+
+ Append
+ Připojit
+
+
+ Choose a directory
Vybrat adresář
+
+ Enter scale
+ Zadejte měřítko
+
+
+ Scale denominator
+ Jmenovatel měřítka
+
+
+ Load scales
+ Načíst měřítka
+
+
+ XML files (*.xml *.XML)
+ XML soubory (*.xml *.XML)
+
+
+ Save scales
+ Uložit měřítka
+
+
+ No Stretch
+ Bez protažení
+
+
+ Stretch To MinMax
+ Protažení podle MinMax
+
+
+ Stretch And Clip To MinMax
+ Protažení a ořezání podle MinMax
+
+
+ Clip To MinMax
+ Ořezání podle MinMax
+
+
+ None / Planimetric
+ Žádný / Planimetrický
+
QgsOptionsBase
- Hide splash screen at startup
- Při startu skrýt úvodní obrazovku
+ Options
+ Možnosti
- Map display will be updated (drawn) after this many features have been read from the data source
- Zobrazení mapy bude aktualizováno (vykreslené) potom, co bude daný počet objektů načten z datového zdroje
-
-
- ...
- ...
-
-
- Select Global Default ...
- Vybrat všeobecný standard ...
-
-
- Make lines appear less jagged at the expense of some drawing performance
- Linie bude vykreslena jako méně roztřepená, nicméně na úkor rychlosti vykreslování
-
-
- Measure tool
- Nástoj pro měření
-
-
- By default new la&yers added to the map should be displayed
- Zobrazovat vrst&vy nově přidané do mapy
+ General
+ Obecné
Data sources
Zdroje dat
+
+ Rendering
+ Vykreslování
+
Canvas & Legend
@@ -46648,10 +36308,89 @@ Always network: always load from network and do not check if the cache has a val
Nástroje mapy
- Composer
- Tvorba mapy
+ Map tools
+ Nástroje mapy
+
+
+ Digitizing
+ Digitalizace
+
+
+ GDAL
+ GDAL
+
+
+ CRS
+ SRS
+
+
+ Locale
+ Lokalizace
+
+
+ Network
+ Síť
+
+
+ Application
+ Aplikace
+
+
+ Style <i>(QGIS restart required)</i>
+ Styl <i>(vyžaduje restart QGISu)</i>
+
+
+ Icon theme
+ Téma ikony
+
+
+ Icon size
+ Velikost ikon
+
+
+ 16
+ 16
+
+
+ 24
+ 24
+
+
+ 32
+ 32
+
+
+ Font
+ Typ písma
+
+
+ Qt default
+ Qt výchozí
+
+
+ Size
+ Velikost
s
s
+
+ Hide splash screen at startup
+ Při startu skrýt úvodní obrazovku
+
+
+ Show tips at start up
+ Zobrazit tipy při startu
+
Bold group box titles
@@ -46674,14 +36423,9 @@ Always network: always load from network and do not check if the cache has a val
QGIS-styl boxů skupin
- Custom side bar style
-
-
- Use live-updating color chooser dialogs
- Použít v reáoném čase aktualizované dialogy výběru barvy
+ Project files
+ Soubory projektu
Specific
Specifický
+
+ ...
+ ...
+
Open project on launch
@@ -46742,7 +36497,12 @@ Always network: always load from network and do not check if the cache has a val
Prompt for confirmation when a layer is to be removed
-
+
+ Warn when opening a project file saved with an older version of QGIS
+ Upozornění při otevírání souboru projektu uloženého starší verzí QGISu
Vždy (nedoporučeno)
- Font
- Typ písma
+ QSettings
+
- Qt default
- Qt výchozí
+ Reset the User Interface settings, to reset QGIS to it's default view
+
- Ignore shapefile encoding
- Ignorovat kódování shapefile
+ Environment
+ Prostředí
- Name
- Název
+ Apply
+ Použít
- ext
- ext
+ Variable
+ Variabilní
- Flags
- Vlajky
+ Value
+ Hodnota
- Description
- Popis
+ Remove
+ Odebrat
- Edit Pyramids Options
- Upravit možnosti pyramid
+ Add
+ Přidat
- Edit Create Options
- Upravit možnosti vytváření
+ Current environment variables (read-only - bold indicates modified at startup)
+ Aktuální proměnné prostředí (pouze ke čtení, tučná indikuje změnu při startu)
- Fix problems with incorrectly filled polygons
- Opravit nesprávně vyplněné polygony
+ Show only QGIS-specific variables
+ Zobrazit pouze proměnné specifické pro QGIS
- <b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
- Use custom variables (restart required - include separators)
+
- Simplification threshold (higher values result in more simplification):
- Plugin paths
+ Cesty k zásuvným modulům
- Higher values result in more simplification
- Path(s) to search for additional C++ plugins libraries
+ Cesty vyhledání přídavných C++ knihoven zásuvných modulů
- Simplify on provider side if possible
- SVG paths
+ Cesty k SVG
+
+
+ Path(s) to search for Scalable Vector Graphic (SVG) symbols
+ Cesty, kde se mají hledat symboly ve formátu SVG (Scalable Vector Graphic)
+
+
+ Feature attributes and table
+ Atributy prvku a tabulka
+
+
+ Open attribute table in a dock window (QGIS restart required)
+ Otevřít atributovou tabulku v dokovaném okně (vyžadován restart QGISu)
+
+
+ Copy geometry in WKT representation from attribute table
+ Kopírovat geometrii ve WKT reprezentaci z atributové tabulky
+
+
+ Attribute table behaviour
+ Chování atributové tabulky
+
+
+ Attribute table row cache
+ Vyrovnávací paměť řádku atributové tabulky
+
+
+ Representation for NULL values
+ Reprezentace pro NULL hodnoty
+
+
+ Data source handling
+ Zacházení s datovými zdroji
+
+
+ Scan for valid items in the browser dock
+ Skenovat platné položky v doku prohlížeče
+
+
+ Scan for contents of compressed files (.zip) in browser dock
+ Skenovat obsah komprimovaných souborů (.zip) v doku prohlížeče
+
+
+ Prompt for raster sublayers when opening
+ Výzva pro rastrové subvrstvy při otvírání
+
+
+ Add PostGIS layers with double click and select in extended mode
+ Přidat vrstvy PostGIS dvojklikem a vybírat v rozšířeném režimu
+
+
+ Rendering behavior
+ Chování vykreslování
+
+
+ By default new la&yers added to the map should be displayed
+ Zobrazovat vrst&vy nově přidané do mapy
+
+
+ Use render caching where possible to speed up redraws
+ Pokud to jde, používat vyrovnávací paměť pro zrychlení překreslování
+
+
+ Render layers in parallel using many CPU cores
+
+
+ Max cores to use:
+
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
+
+ Rendering quality
+ Kvalita vykreslování
+
+
+ Make lines appear less jagged at the expense of some drawing performance
+ Linie bude vykreslena jako méně roztřepená, nicméně na úkor rychlosti vykreslování
+
+
+ Rasters
+ Rastry
+
+
+ RGB band selection
+ Výběr RGB pásma
+
+
+ Red band
+ Červené pásmo
+
+
+ Green band
+ Zelené pásmo
+
+
+ Blue band
+ Modré pásmo
+
+
+ Contrast enhancement
+ Vylepšení kontrastu
Multiplikátor směrodatné odchylky
- WMS getLegendGraphic Resolution
- Debugging
+ Ladění
- Highlight color
- Show these events in the Log Message panel (under Rendering tab)
+
- <html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
- Map canvas refresh
+ Obnovení mapového okna
- Buffer
- Obalová zóna
-
-
- Lines / outlines buffer in millimeters.
-
-
- Minimum width
-
-
- Minimum line / outline width in millimeters.
-
-
- Nautical Miles
-
-
- Panning and zooming
- Posouvat a zvětšovat
-
-
- Zoom
- Zvětšit
-
-
- Zoom and recenter
- Zvětšit a vycentrovat
-
-
- Nothing
- Nic
-
-
- Predefined scales
- Předdefinovaná měřítka
-
-
- Composition defaults
-
-
- Default font
-
-
- Grid appearance
-
-
- Grid style
- Styl mřížky
-
-
- Color...
- Barva...
-
-
- Spacing
- Mezery
-
-
- mm
- mm
-
-
- Render layers in parallel using many CPU cores
-
-
- Max cores to use:
-
-
- Grid offset
- Odsazení mřížky
-
-
- x:
- x:
-
-
- y:
- y:
-
-
- Snap tolerance
- Tolerance uchopení
-
-
- Default snapping tolerance
- Výchozí přichytávací tolerance
-
-
- Search radius for vertex edits
- Vyhledávací poloměr pro editaci lomových bodů
-
-
- Marker size
- Velikost značky
-
-
- Don't enable 'on the fly' reprojection
-
-
- Default datum transformations
-
-
- Source CRS
-
-
- Destination CRS
-
-
- Source datum transform
-
-
- Destination datum transform
-
-
- Ask for datum transformation when no default is defined
-
-
- Default expiration period for WMS-C/WMTS tiles (hours)
- Výchozí expirační perioda pro dlaždice WMS-C/WMTS (hodin)
-
-
- General
- Obecné
-
-
- Rendering & SVG
- Vykreslování & SVG
-
-
- Map tools
- Nástroje mapy
-
-
- Locale
- Lokalizace
-
-
- Locale to use instead
- Použít jinou lokalizaci
-
-
- Additional Info
- Další info
-
-
- Detected active locale on your system:
- Na vašem systému byla zjištěna aktivní lokalizace:
-
-
- Selecting this will unselect the 'make lines less' jagged toggle
- Zaškrtnutím nebude zvolena možnost "tvorba méně roztřepených linií"
-
-
- Rubberband
- Gumička
-
-
- Line width in pixels
- Šířka linie v pixelech
-
-
- Snapping
- Uchycení
-
-
- Zoom to mouse cursor
- Zvětšit na kurzor myši
-
-
- Options
- Možnosti
-
-
- Digitizing
- Digitalizace
-
-
- Project files
- Soubory projektu
-
-
- Prompt to save project changes when required
- Výzva k uložení změn v projektu, pokud je potřeba
-
-
- Warn when opening a project file saved with an older version of QGIS
- Upozornění při otevírání souboru projektu uloženého starší verzí QGISu
-
-
- Default Map Appearance (overridden by project properties)
- Výchozí vzhled mapy (potlačen nastavením projektu)
+ Default map appearance (overridden by project properties)
+ Výchozí vzhled mapy (přepsáno vlastnostmi projektu)
Selection color
Výběr barvy
+
+ Highlight color
+
+
+ <html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
+
+
+ Buffer
+ Obalová zóna
+
+
+ Lines / outlines buffer in millimeters.
+
+
+ Minimum width
+ Minimální šířka
+
+
+ Minimum line / outline width in millimeters.
+
+
+ Suppress attribute form pop-up after feature creation
+
Background color
Barva pozadí
- &Application
- &Aplikace
+ Use live-updating color chooser dialogs
+ Použít v reáoném čase aktualizované dialogy výběru barvy
- Icon theme
- Téma ikony
+ Ignore shapefile encoding declaration
+
- Icon size
- Velikost ikon
+ Disable OGR on-the-fly conversion from declared encoding to UTF-8
+
+
+ Composer
+
+
+ Custom side bar style
+
+
+ Add Oracle layers with double click and select in extended mode
+
+
+ <b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
+
+
+ Simplification threshold (higher values result in more simplification):
+
+
+ Higher values result in more simplification
+
+
+ Simplify on provider side if possible
+
+
+ Layer legend
+ Legenda vrstvy
Open attribute table
Otevřít atributovou tabulku
-
- Capitalise layer names in legend
- Psát názvy vrstev v legendě velkým písmem
-
-
- Display classification attribute names in legend
- Zobrazit atributové názvy klasifikace v legendě
-
-
- Create raster icons in legend
- Vytvořit ikony rastrů v legendě
-
-
- Show tips at start up
- Zobrazit tipy při startu
-
-
- Open identify results in a dock window (QGIS restart required)
- Otevřít výsledky identifikace v dokovaném okně (vyžaduje restert QGISu)
-
-
- Open snapping options in a dock window (QGIS restart required)
- Otevřít možnosti přichytávání v dokovaném okně (vyžadován restart QGISu)
-
-
- Open attribute table in a dock window (QGIS restart required)
- Otevřít atributovou tabulku v dokovaném okně (vyžadován restart QGISu)
-
-
- Add PostGIS layers with double click and select in extended mode
- Přidat vrstvy PostGIS dvojklikem a vybírat v rozšířeném režimu
-
-
- Add new layers to selected group
- Přidat nové vrstvy do vybrané skupiny
-
-
- Attribute table behaviour
- Chování atributové tabulky
-
-
- Representation for NULL values
- Reprezentace pro NULL hodnoty
-
-
- Plugin paths
- Cesty k zásuvným modulům
-
-
- Path(s) to search for additional C++ plugins libraries
- Cesty vyhledání přídavných C++ knihoven zásuvných modulů
-
-
- Rendering
- Vykreslování
-
-
- Rendering behavior
- Chování vykreslování
-
-
- Number of features to draw before updating the display
- Počet vykreslených objektů před aktualizací zobrazení
-
-
- <b>Note:</b> Use zero to prevent display updates until all features have been rendered
- <b>Poznámka:</b> Nula se používá k zamezení zobrazení aktualizací dokud nebudou vykresleny všechny objekty
-
-
- Style <i>(QGIS restart required)</i>
- Styl <i>(vyžaduje restart QGISu)</i>
-
-
- 16
- 16
-
-
- 24
- 24
-
-
- 32
- 32
-
-
- Menu size
- Velikost menu
-
-
- Add new layers to selected or current group
- Přidat nové vrstvy do vybrané nebo aktuální skupiny
-
-
- Copy geometry in WKT representation from attribute table
- Kopírovat geometrii ve WKT reprezentaci z atributové tabulky
-
-
- Attribute table row cache
- Vyrovnávací paměť řádku atributové tabulky
-
-
- Prompt for raster sublayers
- Výzva pro rastrové subvrstvy
-
-
- Scan for valid items in the browser dock
- Skenovat platné položky v doku prohlížeče
-
-
- Scan for contents of compressed files (.zip) in browser dock
- Skenovat obsah komprimovaných souborů (.zip) v doku prohlížeče
-
-
- GDAL
- GDAL
-
-
- GDAL Drivers
- GDAL ovladače
-
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
- V některých případech lze použít více GDAL ovladačů k načtení stejnéhorastrového formátu. Použijte seznam níže pro určení, který se má použít.
-
-
- Plugins
- Zásuvné moduly
-
-
- Use render caching where possible to speed up redraws
- Pokud to jde, používat vyrovnávací paměť pro zrychlení překreslování
-
-
- Rendering quality
- Kvalita vykreslování
-
-
- SVG paths
- Cesty k SVG
-
-
- Path(s) to search for Scalable Vector Graphic (SVG) symbols
- Cesty, kde se mají hledat symboly ve formátu SVG (Scalable Vector Graphic)
-
-
- Map update interval
-
-
- ms
-
-
- Enable feature simplification by default for newly added layers
-
-
- Rasters
- Rastry
-
-
- RGB band selection
- Výběr RGB pásma
-
-
- Red band
- Červené pásmo
-
-
- Green band
- Zelené pásmo
-
-
- Blue band
- Modré pásmo
-
-
- Use standard deviation
- Použít směrodatnou odchylku
-
-
- Contrast enhancement
- Vylepšení kontrastu
-
-
- Decimal places
- Desetinná místa
-
-
- Keep base unit
- Ponechat základní jednotky
-
-
- Overlays
- Překryvy
-
-
- Other settings
- Další nastavení
-
-
- Reuse last entered attribute values
- Použít znovu naposledy zadané hodnoty atributů
-
-
- Validate geometries
- Ověřit platnost geometrií
-
-
- Join style for curve offset
- Připojit styl pro křivku odsazení
-
-
- Quadrantsegments for curve offset
- Kvadrant-segmenty pro křivku odsazení
-
-
- Miter limit for curve offset
- Miter limit pro křivku odsazení
-
-
- Default Coordinate Reference System for new projects
- Výchozí souřadnicový referenční systém pro nové projekty
-
-
- Enable 'on the &fly' reprojection by default
- Zapnout 'on the &fly' reprojekci ve výchozím nastavení
-
-
- Select...
- Vybrat...
-
-
- Always start new projects with this CRS
- Vždy začít nové projekty s tímto SRS
-
-
- Coordinate Reference System for new layers
- Souřadnicový referenční systém pro nové vrstvy
-
-
- When a new layer is created, or when a layer is loaded that has no Coordinate Reference System (CRS)
- Když je vytvořena nová vrstva nebo otevřena vrstva, která nemá souřadnicový referenční systém (SRS)
-
-
- Network
- Síť
-
-
- Timeout for network requests (ms)
- Časový limit pro síťové požadavky (ms)
-
-
- Compatibility
- Kompatibilita
-
-
- Application
- Aplikace
-
-
- Use new generation symbology for rendering
- Pro vykreslení použít symbologii nové generace
-
-
- Preferred angle units
- Preferované jednotky úhlu
-
-
- Degrees
- Stupně
-
-
- Radians
- Radiány
-
-
- Gon
- Gon
-
-
- Zoom factor
- Zvětšovací faktor
-
-
- Mouse wheel action
- Akce kolečka myši
-
-
- Placement algorithm
- Algoritmus umístění
-
-
- Exclude URLs (starting with)
- Vyloučit URL (začínající na)
-
-
- Cache settings
- Nastavení vyrovnávací paměti
-
-
- Directory
- Adresář
-
-
- Size
- Velikost
-
-
- Clear
- Vyčistit
-
-
- WMS search address
- Vyhledávací adresy WMS
-
-
- Open feature form, if a single feature is identified
- Otevřít formulář prvku, je-li identifikován jedinný prvek
-
-
- Rubberband color
- Barva pravítka
-
-
- Ellipsoid for distance calculations
- Elipsoid pro výpočty vzdáleností
-
-
- Preferred measurements units
- Preferované měřicí jednotky
-
-
- Meters
- Metry
-
-
- Feet
- Stopy
-
-
- Line color
- Barva čáry
-
-
- Network & Proxy
- Síť & Proxy
-
-
- Identify
- Identifikovat
-
-
- <b>Note:</b> Specify the search radius as a percentage of the map width
- <b>Poznámka:</b> Upřesnit poloměr hledání procentem z šířky mapy
-
-
- Search radius for identifying features and displaying map tips
- Vyhledávací poloměr pro identifikaci objektů a zobrazení mapových tipů
-
-
- Mode
- Režim
-
-
- Line width
- Šířka linie
-
-
- Default snap mode
- Výchozí režim přichycení
-
-
- Default Coordinate Reference System
- Výchozí souřadnicový referenční systém
-
-
- Vertex markers
- Symboly lomových bodů
-
-
- Show markers only for selected features
- Zobrazit symboly pouze u vybraných prvků
-
-
- Marker style
- Styl symbolu
-
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
-
-
- Prompt for &CRS
- Výzva pro &SRS
-
-
- Use &project CRS
- Použít &SRS projektu
-
-
- Environment
- Prostředí
-
-
- QSettings
-
-
- Reset the User Interface settings, to reset QGIS to it's default view
-
-
- Apply
- Použít
-
-
- Variable
- Variabilní
-
-
- Value
- Hodnota
-
-
- Current environment variables (read-only - bold indicates modified at startup)
-
-
- Show only QGIS-specific variables
- Zobrazit pouze proměnné specifické pro QGIS
-
-
- Use custom variables (restart required - include separators)
-
-
- Feature attributes and table
- Atributy prvku a tabulka
-
-
- Data source handling
- Zacházení s datovými zdroji
-
-
- Prompt for raster sublayers when opening
- Výzva pro rastrové subvrstvy při otvírání
-
-
- Ignore shapefile encoding declaration
-
-
- Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
-
- Add Oracle layers with double click and select in extended mode
-
-
- Enable back buffer
- Zapnout zpětný buffer
-
-
- Debugging
- Ladění
-
-
- Show these events in the Log Message panel (under Rendering tab)
-
-
- Map canvas refresh
- Obnovení mapového okna
-
-
- Map canvas & legend
- Mapové okno & legenda
-
-
- Default map appearance (overridden by project properties)
- Výchozí vzhled mapy (přepsáno vlastnostmi projektu)
-
-
- Layer legend
- Legenda vrstvy
-
Capitalise layer names
@@ -47814,255 +36944,597 @@ Always network: always load from network and do not check if the cache has a val
Styly položek legendy
- Overlay position
- Pozice překryvu
+ WMS getLegendGraphic Resolution
+
+
+ Identify
+ Identifikovat
+
+
+ <b>Note:</b> Specify the search radius as a percentage of the map width
+ <b>Poznámka:</b> Upřesnit poloměr hledání procentem z šířky mapy
+
+
+ Search radius for identifying features and displaying map tips
+ Vyhledávací poloměr pro identifikaci objektů a zobrazení mapových tipů
+
+
+ Measure tool
+ Nástoj pro měření
+
+
+ Rubberband color
+ Barva pravítka
+
+
+ Preferred measurements units
+ Preferované měřicí jednotky
+
+
+ Meters
+ Metry
+
+
+ Feet
+ Stopy
+
+
+ Nautical Miles
+
+
+ Preferred angle units
+ Preferované jednotky úhlu
+
+
+ Degrees
+ Stupně
+
+
+ Map update interval
+
+
+ ms
+
+
+ Enable feature simplification by default for newly added layers
+
+
+ Radians
+ Radiány
+
+
+ Decimal places
+ Desetinná místa
+
+
+ Keep base unit
+ Ponechat základní jednotky
+
+
+ Gon
+ Gon
+
+
+ Panning and zooming
+ Posouvat a zvětšovat
+
+
+ Zoom factor
+ Zvětšovací faktor
+
+
+ Mouse wheel action
+ Akce kolečka myši
+
+
+ Zoom
+ Zvětšit
+
+
+ Zoom and recenter
+ Zvětšit a vycentrovat
+
+
+ Zoom to mouse cursor
+ Zvětšit na kurzor myši
+
+
+ Nothing
+ Nic
+
+
+ Predefined scales
+ Předdefinovaná měřítka
Add predefined scale
-
Remove selected
-
Insert default scales
-
Import from file
- Import ze souboru
+
Export to file
- Export do souboru
+
+
+ Composition defaults
+
+
+ Default font
+
+
+ Grid appearance
+
+
+ Grid style
+
+
+ Color...
+
Grid and guide defaults
- Grid defaults
+
Grid spacing
- Spacing
+
- px
- px
+ mm
+
- Grid offset
+
+
+ x:
+
+
+ y:
+
+
+ Snap tolerance
+
+
+ Guide defaults
+
+
+ Feature creation
Vytváření prvku
- Suppress attribute form pop-up after feature creation
- Validate geometries
+ Ověřit platnost geometrií
- Open snapping options in a dock window (QGIS restart required)
- Otevřít možnosti přichytávání v dokovaném okně (vyžadován restart QGISu)
+ Reuse last entered attribute values
+ Použít znovu naposledy zadané hodnoty atributů
- Curve offset tool
- Nástroj odsazení křivky
+ Rubberband
+ Gumička
- Miter limit
- Miter limit
+ Line color
+ Barva čáry
- Join style
- Styl spojů
+ Line width in pixels
+ Šířka linie v pixelech
- Quadrant segments
- Segmenty kvadrantu
+ Line width
+ Šířka linie
- GDAL driver options
- Možnosti GDAL ovladače
+ Snapping
+ Uchycení
- GDAL drivers
- GDAL ovladače
+ Default snap mode
+ Výchozí režim přichycení
- Coordinate Reference System (CRS)
- Souřadnicový referenční systém (SRS/CRS)
+ Default snapping tolerance
+ Výchozí přichytávací tolerance
- CRS for new layers
- SRS pro nové vrstvy
+ Search radius for vertex edits
+ Vyhledávací poloměr pro editaci lomových bodů
- Use default CRS displa&yed below
- Použít výchozí SRS zobra&zený níže
-
-
- When a new layer is created, or when a layer is loaded that has no CRS
-
-
- Default CRS for new projects
- Výchozí SRS pro nové projekty
-
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
-
- Override system locale
- Potlačit lokalizaci systému
-
-
- <b>Note:</b> Enabling / changing overide on local requires an application restart
- <b>Poznámka:</b> Povolení / změnění vyžaduje restart aplikace
-
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
-
- Size [KiB]
-
-
- Use proxy for web access
- Použít proxy pro přístup na web
-
-
- Host
- Hostitel
-
-
- Port
- Port
-
-
- User
- Uživatel
-
-
- Leave this blank if no proxy username / password are required
- Nevyplňujte pokud není vyžadováno uživatelské jméno / heslo proxy
-
-
- Password
- Heslo
-
-
- Open attribute table in a dock window
- Otavřít atributovou tabulku v dokovaném okně
-
-
- CRS
- SRS
-
-
- Prompt for CRS
- Dotaz na SRS
-
-
- Project wide default CRS will be used
- Bude použito výchozí SRS projektu
-
-
- Global default CRS displa&yed below will be used
- Bude použito výchozí SRS zobra&zené níže
-
-
- Enter attribute values
- Zadejte hodnoty atributu
-
-
- Suppress attributes pop-up windows after each created feature
- Potlačí vyskakovací okna atributů po každém vytvořeném prvku
-
-
- When a new layer is created, or when a layer is loaded that has no coordinate reference system (CRS)
- Když je vytvořena nová vrstva, nebo načtena vrstva bez souřadnicového referenčního systému (SRS)
-
-
- Proxy type
- Typ proxy
-
-
- Add
- Přidat
-
-
- Remove
- Odebrat
-
-
- Overlay
- Překrytí
-
-
- Position
- Umístění
-
-
- map units
mapových jednotek
pixels
pixelů
+
+ Open snapping options in a dock window (QGIS restart required)
+ Otevřít možnosti přichytávání v dokovaném okně (vyžadován restart QGISu)
+
+
+ Vertex markers
+ Symboly lomových bodů
+
+
+ Marker style
+ Styl symbolu
+
+
+ Marker size
+ Velikost značky
+
+
+ Show markers only for selected features
+ Zobrazit symboly pouze u vybraných prvků
+
+
+ Curve offset tool
+ Nástroj odsazení křivky
+
+
+ Miter limit
+ Miter limit
+
+
+ Join style
+ Styl spojů
+
+
+ Quadrant segments
+ Segmenty kvadrantu
+
+
+ GDAL driver options
+ Možnosti GDAL ovladače
+
+
+ Edit Pyramids Options
+ Upravit možnosti pyramid
+
+
+ Edit Create Options
+ Upravit možnosti vytváření
+
+
+ GDAL drivers
+ GDAL ovladače
+
+
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+ V některých případech lze použít více GDAL ovladačů k načtení stejnéhorastrového formátu. Použijte seznam níže pro určení, který se má použít.
+
+
+ Name
+ Název
+
+
+ ext
+ ext
+
+
+ Flags
+ Vlajky
+
+
+ Description
+ Popis
+
+
+ CRS for new layers
+ SRS pro nové vrstvy
+
+
+ Select...
+ Vybrat...
+
+
+ Use &project CRS
+ Použít &SRS projektu
+
+
+ Prompt for &CRS
+ Výzva pro &SRS
+
+
+ Use default CRS displa&yed below
+ Použít výchozí SRS zobra&zený níže
+
+
+ When a new layer is created, or when a layer is loaded that has no CRS
+ Když je vytvořena nová vrstva nebo je načtena vrstva bez definice SRS
+
+
+ Default CRS for new projects
+ Výchozí SRS pro nové projekty
+
+
+ Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
+
+
+ Automatically enable 'on the fly' reprojection if layers have different CRS
+ Automaticky zapnout 'on the fly' reprojekci pokud mají vrstvy různý SRS
+
+
+ Always start new projects with this CRS
+ Vždy začít nové projekty s tímto SRS
+
+
+ Enable 'on the &fly' reprojection by default
+ Zapnout 'on the &fly' reprojekci ve výchozím nastavení
+
+
+ Don't enable 'on the fly' reprojection
+
+
+ Default datum transformations
+
+
+ Source CRS
+
+
+ Destination CRS
+
+
+ Source datum transform
+
+
+ Destination datum transform
+
+
+ Ask for datum transformation when no default is defined
+
+
+ Override system locale
+ Potlačit lokalizaci systému
+
+
+ Locale to use instead
+ Použít jinou lokalizaci
+
+
+ <b>Note:</b> Enabling / changing overide on local requires an application restart
+ <b>Poznámka:</b> Povolení / změnění vyžaduje restart aplikace
+
+
+ Additional Info
+ Další info
+
+
+ Detected active locale on your system:
+ Na vašem systému byla zjištěna aktivní lokalizace:
+
+
+ WMS search address
+ Vyhledávací adresy WMS
+
+
+ Timeout for network requests (ms)
+ Časový limit pro síťové požadavky (ms)
+
+
+ Default expiration period for WMS-C/WMTS tiles (hours)
+ Výchozí expirační perioda pro dlaždice WMS-C/WMTS (hodin)
+
+
+ Max retry in case of tile request errors
+
+
+ User-Agent
+
+
+ Cache settings
+ Nastavení vyrovnávací paměti
+
+
+ Directory
+ Adresář
+
+
+ Size [KiB]
+
+
+ Clear
+ Vyčistit
+
+
+ Use proxy for web access
+ Použít proxy pro přístup na web
+
+
+ Host
+ Hostitel
+
+
+ Port
+ Port
+
+
+ User
+ Uživatel
+
+
+ Leave this blank if no proxy username / password are required
+ Nevyplňujte pokud není vyžadováno uživatelské jméno / heslo proxy
+
+
+ Password
+ Heslo
+
+
+ Proxy type
+ Typ proxy
+
+
+ Exclude URLs (starting with)
+ Vyloučit URL (začínající na)
+
QgsOptionsDialogBase
@@ -48077,7 +37549,7 @@ Always network: always load from network and do not check if the cache has a val
Missing some of the .ui template objects:
-
@@ -48085,17 +37557,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -48150,12 +37622,12 @@ Chyba: %2
Unsupported geometry type %1 in %2.%3.%4 ignored
- Nepodporovaný typ geometrie %1 in %2.%3.%4 ignorován
View %1.%2 doesn't have integer columns for use as keys.
-
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
-
- Restrict the displayed tables to those that are in the geometry_columns table
- Omezit zobrazené tabulky na takové, které jsou v tabulce geometry_columns
+
Only look in meta data table
Nahlížet pouze do tabulky metadat
-
- Restrict the search to the public schema for spatial tables not in the geometry_columns table
- Omezit hledání v prostorových tabulkách, které nejsou v tabulce geometry_columns, podle veřejného schéma
-
Only look for user's tables
@@ -48451,7 +37915,7 @@ Chyba: %2
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
QgsOraclePlugin
-
- Select Oracle GeoRaster
- Vybrat Oracle Georaster
-
-
- Open a Oracle Spatial GeoRaster
- Otevřít Oracle Spatial GeoRaster
-
-
- &Oracle Spatial
- &Oracle Spatial
-
Add Oracle GeoRaster Layer...
@@ -48604,47 +38056,47 @@ Chyba: %2
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
- Načtení komentáře tabulky %1.%2 selhalo [%3]
Loading comment for columns of table %1.%2 failed [%3]
- Načtení komentáře pro sloupce tabulky %1.%2 selhalo [%3]
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
Primary key field %1 not found in %2
- Pole primárního klíče '%1' nenalezeno v %2
Evaluation of default value failed
-
Could not start transaction
- Nemohu spustit transakci
Could not prepare insert statement
-
Could not insert feature %1
- Nemohu vložit prvek %1
Could not commit transaction
- Nemohu provést commit transakci
Oracle error while adding features: %1
-
Could not rollback transaction
- Nemohu provést rollback transakci
Deletion of feature %1 failed
- Smazání prvku %1 selhalo
Oracle error while deleting features: %1
-
Adding attribute %1 failed
- Přidání atributu %1 selhalo
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
- Vytvoření tabulky selhalo.
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -49042,23 +38494,15 @@ Error: %2
&Add
&Přidat
-
- &Build query
- &Vytvořit dotaz
-
-
- Build query
- Vytvořit dotaz
-
&Set Filter
- &Nastavit filtr
+ &Nastavit filtr
Set Filter
- Nastavit filtr
+ Nastavit filtr
Enter...
- Vstup...
+ Vstup...
@@ -49221,19 +38665,19 @@ Error: %2
Specify a geometry type
-
Enter a SRID
- Vložte SRID
Select a primary key
- Vyberte primární klíč
QgsPGConnectionItem
-
- Failed to retrieve layers
- Selhalo získání vrstev
-
-
- No layers found.
- Nenalezeny žádné vrstvy.
-
Edit...
@@ -49275,7 +38711,7 @@ Error: %2
Refresh
- Obnovit
+ Obnovit
Label
- Popisek
-
-
-
- QgsPasteTransformations
-
- &Add New Transfer
- &Přidat nový transfer
+ Popisek
@@ -49461,6 +38890,11 @@ Error: %2
Solid Line
Plná čára
+
+ No Pen
+ Žádné pero
+
Dash Line
@@ -49481,76 +38915,6 @@ Error: %2
Dash Dot Dot Line
Čára-tečka-tečka
-
- No Pen
- Žádné pero
-
-
-
- QgsPgGeoprocessing
-
- Buffer features in layer %1
- Buffer zóna objektů ve vrstvě %1
-
-
- Error connecting to the database
- Nastala chyba při připojení k databázi
-
-
- &Geoprocessing
- &Geoprostorové zpracování
-
-
- Unable to add geometry column
- Nelze přidat sloupec s geometrií
-
-
- Unable to create table
- Nelze vytvořit tabulku
-
-
- No GEOS support
- Chybějící podpora pro GEOS
-
-
- Buffer function requires GEOS support in PostGIS
- Funkce buffer zóny vyžaduje podporu GEOS v PostGIS
-
-
- No Active Layer
- Žádná aktivní vrstva
-
-
- You must select a layer in the legend to buffer
- Pro vytvoření buffer zóny musíte vybrat vrstvu v legendě
-
-
- &Buffer features
- &Prvky buffer zóny
-
-
- Not a PostgreSQL/PostGIS Layer
- Není PostgreSQL/PostGIS vrstva
-
-
- Create a buffer for a PostgreSQL layer. A new layer is created in the database with the buffered features.
- Vytvořit obalovou zónu pro PostgreSQL vrstvu. Je vytvořena nová vrstva v databázi s prvky v obalové zóně.
-
-
- Unable to add geometry column to the output table %1-%2
- Nemohu přidat sloupec s geometrií do výstupní tabulky %1-%2
-
-
- Failed to create the output table %1
- Selhalo vytvoření výstupní tabulky %1
-
-
- %1 is not a PostgreSQL/PostGIS layer.
-Geoprocessing functions are only available for PostgreSQL/PostGIS Layers
- %1 není vrstva PostgreSQL/PostGIS.
-Funkce geoprocesingu jsou dostupné jen pro vrstvy PostgreSQL/PostGIS
-
QgsPgNewConnection
@@ -49615,16 +38979,6 @@ Funkce geoprocesingu jsou dostupné jen pro vrstvy PostgreSQL/PostGIS
-
- Connection failed - Check settings and try again.
-
-Extended error information:
-%1
- Připojwní selhalo - Zkontrolujte nastavení a zkuste znovu.
-
-Rozšířené informace o chybách:
-%1
-
QgsPgNewConnectionBase
@@ -49643,20 +38997,30 @@ Rozšířené informace o chybách:
Name
Název
+
+ Service
+ Služba
+
Host
Hostitel
+
+ Port
+ Port
+
Database
Databáze
- Port
- Port
+ SSL mode
+ SSL režim
Password
Heslo
+
+ Name of the new connection
+ Název nového připojení
+
+
+ 5432
+ 5432
+
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
Omezí zobrazené tabulky na takové, které jsou v registrech vrstvy (geometry_columns, geography_columns, topology.layer). Toto může urychlit počáteční zobrazení prostorových tabulek.
-
- Only look in the layer registries
- Nahlížet pouze do registrů vrstvy
-
-
- Use estimated table statistics for the layer metadata.
- Použít odhadnuté statistiky tabulky pro metadata vrstvy.
-
-
- <html>
-<body>
-<p>When the layer is setup various metadata is required for the PostGIS table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p>
-<p>By activating this option the following fast table metadata operations are done:</p>
-<p>1) Row count is determined from table statistics obtained from running the PostgreSQL table analyse function.</p>
-<p>2) Table extents are always determined with the estimated_extent PostGIS function even if a layer filter is applied.</p>
-<p>3) If the table geometry type is unknown and is not exclusively taken from the geometry_columns table, then it is determined from the first 100 non-null geometry rows in the table.</p>
-</body>
-</html>
-
-
- Use estimated table metadata
- Použít odhadnutá metadata tabulky
-
-
- Don't resolve type of unrestricted columns (GEOMETRY)
- Neřešit typ neomezených sloupců (GEOMETRY)
-
-
- Allow geometryless tables
- Povolit tabulky bez geometrie
-
-
- SSL mode
- SSL režim
-
-
- Name of the new connection
- Název nového připojení
-
-
- 5432
- 5432
-
Only show layers in the layer registries
-
-
- Save Username
- Uložit uživatelské jméno
-
-
- Save Password
- Uložit heslo
-
-
- &Test Connect
- &Test připojení
-
-
- Service
- Služba
-
-
- Restrict the displayed tables to those that are in the geometry_columns table
- Omezit zobrazené tabulky na takové, které jsou v tabulce geometry_columns
-
-
- Restricts the displayed tables to those that are in the geometry_columns table. This can speed up the initial display of spatial tables.
- Omezit zobrazené tabulky na takové, které jsou v tabulce geometry_columns. Toto může urychlit první zobrazení prostorových tabulek.
-
-
- Only look in the geometry_columns table
- Pouze tabulka geometry_columns
+
Only look in the 'public' schema
Sledovat pouze 'veřejné' schéma
+
+ Save Username
+ Uložit uživatelské jméno
+
+
+ &Test Connect
+ &Test připojení
+
+
+ Save Password
+ Uložit heslo
+
+
+ Use estimated table statistics for the layer metadata.
+ Použít odhadnuté statistiky tabulky pro metadata vrstvy.
+
+
+ <html>
+<body>
+<p>When the layer is setup various metadata is required for the PostGIS table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p>
+<p>By activating this option the following fast table metadata operations are done:</p>
+<p>1) Row count is determined from table statistics obtained from running the PostgreSQL table analyse function.</p>
+<p>2) Table extents are always determined with the estimated_extent PostGIS function even if a layer filter is applied.</p>
+<p>3) If the table geometry type is unknown and is not exclusively taken from the geometry_columns table, then it is determined from the first 100 non-null geometry rows in the table.</p>
+</body>
+</html>
+
+
+ Use estimated table metadata
+ Použít odhadnutá metadata tabulky
+
Also list tables with no geometry
Také vyjmenovává tabulky bez geometrie
+
+ Don't resolve type of unrestricted columns (GEOMETRY)
+ Neřešit typ neomezených sloupců (GEOMETRY)
+
QgsPgSourceSelect
+
+ Add PostGIS Table(s)
+ Přidat tabulku(y) PostGIS
+
&Add
&Přidat
-
- &Build query
- &Vytvořit dotaz
-
-
- Build query
- Vytvořit dotaz
-
-
- &Save
- &Uložit
-
-
- Save connections
- Uložit připojení
-
-
- &Load
- &Načíst
-
-
- Load connections
- Načíst připojení
-
-
- Wildcard
- Zástupný znak
-
-
- Add PostGIS Table(s)
- Přidat tabulku(y) PostGIS
-
&Set Filter
@@ -49842,6 +39145,12 @@ Rozšířené informace o chybách:
Set Filter
Nastavit filtr
+
+ Wildcard
+ Zástupný znak
+
Confirm Delete
Potvrdit smazání
+
+ Load connections
+ Načíst připojení
+
XML files (*.xml *XML)
@@ -49926,138 +39240,11 @@ Rozšířené informace o chybách:
Stop
Zastavit
-
- Postgres/PostGIS Provider
- Postgres/PostGIS poskytovatel
-
-
- Could not open the Postgres/PostGIS Provider.
-Check message log for possible errors.
- Nemohu otevřít poskytovatele Postgres/PostGIS.
-Zkontrolujte záznam zpráv na možné chyby.
-
-
- No accessible tables or views found.
-Check the message log for possible errors.
- Nenalezeny žádné přístupné tabulky nebo zobrazení.
-Zkontrolujte záznam zpráv na možné chyby.
-
-
- Could not open the Postgres/PostGIS Provider
- Nemphu otevřít Postgres/PostGIS poskytovatele
-
Connect
Připojit
-
- Connection failed
- Připojení selhalo
-
-
- Connection to %1 on %2 failed. Either the database is down or your settings are incorrect.
-
-Check your username and password and try again.
-
-The database said:
-%3
- Připojení k %1 na %2 selhalo. Buď je databáze vypnutá nebo vaše nastavení nejsou správná.
-
-Zkonrolujte vaše uživatelské jméno a heslo a zkuste znovu.
-
-Databáze řekla:
-%3
-
-
- Accessible tables could not be determined
- Přístopové tabulky nelze určit
-
-
- Database connection was successful, but the accessible tables could not be determined.
- Spojení s databází bylo úspěšné, avšak přístupové tabulky nešlo určit.
-
-
- Database connection was successful, but the accessible tables could not be determined.
-
-The error message from the database was:
-%1
-
- Spojení s databází bylo úspěšné, avšak přístupové tabulky nešlo uřcit.
-
-Chybová zpráva z databáze byla:
-%1
-
-
-
- Waiting
- Čekám
-
-
- No geometry
- Žádná geometrie
-
-
- No accessible tables found
- Nebyly nalezeny žádné přístupné tabulky
-
-
- Database connection was successful, but no accessible tables were found.
-
-Please verify that you have SELECT privilege on a table carrying PostGIS
-geometry.
- Spojení s databází bylo úspěšné, avšak přístupové tabulky nebyly nalezeny.
-
-Prosím zkontrolujte, že máte práva SELECT (výběru) na tabulky obasahující PostGIS
-geometrii.
-
-
-
- QgsPgSourceSelectBase
-
- Add PostGIS Table(s)
- Přidat tabulku(y) PostGIS
-
-
- PostgreSQL Connections
- Spojení PostgreSQL
-
-
- Delete
- Smazat
-
-
- Edit
- Upravit
-
-
- New
- Nový
-
-
- Connect
- Připojit
-
-
- Search options
- Možnosti hledání
-
-
- Search
- Hledat
-
-
- Search mode
- Režim hledání
-
-
- Search in columns
- Hledat ve sloupcích
-
-
- Build query
- Vytvořit dotaz
-
QgsPgSourceSelectDelegate
@@ -50070,7 +39257,7 @@ geometrii.
Enter...
- Vstup...
+ Vstup...
@@ -50085,47 +39272,6 @@ geometrii.
Table
Tabulka
-
- Type
- Typ
-
-
- Geometry column
- Sloupec s geometrií
-
-
- SRID
- SRID
-
-
- Primary key column
- Sloupec primárního klíče
-
-
- Select at id
- Vybrat na id
-
-
- Sql
- Sql
-
-
- Detecting...
- Detekuji...
-
-
- Select...
- Vybrat...
-
-
- Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
- Vypnout schopnost 'Rychlý přístup na ID' pro donucení ponechání atributové tabulky v paměti (např. v případě nákladných zobrazení).
-
Column
@@ -50141,65 +39287,90 @@ geometrii.
Spatial Type
Prostorový typ
+
+ SRID
+ SRID
+
Primary Key
Primární klíč
+
+ Select at id
+ Vybrat na id
+
+
+ Sql
+ Sql
+
+
+ Select a primary key
+ Vyberte primární klíč
+
+
+ Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
+ Vypnout schopnost 'Rychlý přístup na ID' pro donucení ponechání atributové tabulky v paměti (např. v případě nákladných zobrazení).
+
+
+ Select...
+ Vybrat...
+
Specify a geometry type
-
Enter a SRID
-
Enter...
Vstup...
-
- Select a primary key
-
QgsPhotoConfigDlgBase
Form
- Formulář
+
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
-
Height
- Výška
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -50207,44 +39378,20 @@ geometrii.
Select a picture
-
...
- ...
+
QgsPluginInstaller
-
- Couldn't parse output from the repository
- Nelze oddělit výstupní formulář úschovny
-
-
- Couldn't open the local plugin directory
- Nemůže být otevřen lokální adresář zásuvného modulu
-
-
- Fetch Python Plugins...
- Načíst zásuvné moduly Python...
-
-
- Install more plugins from remote repositories
- Instalovat více zásuvných modulů ze vzdálených zdrojů
-
Looking for new plugins...
Hledání nových zásuvných modulů...
-
- QGIS Plugin Installer update
- Aktualizace instálatoru zásuvných modulů QGISu
-
-
- The Plugin Installer has been updated. Please restart QGIS prior to using it
- Instálator zásuvných modulů QGISu byl aktualizován. Restartujte prosím QGIS před jeho použitím
-
There is a new plugin available
Je dostupný nový zásuvný modul
@@ -50259,47 +39406,47 @@ geometrii.
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
- Neznámá chyba
+
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
@@ -50307,91 +39454,90 @@ geometrii.
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
- Jste si jistý, že chcete nahrát starší verzi zásuvního modulu? Nainstalovaná verze je novější!
+
Plugin installation failed
- Instalace zásuvného modulu selhala
+
Plugin has disappeared
- Zásuvný modul zmizel
+
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
- Vypadá to, že zásuvný modul byl nainstalován, ale nevím kam. Balíček zásuvného modulu pravděpodobně obsahuje špatně pojmenovaný adresář.
-Prosím prohledejte seznam nainstalovaných zásuvných modulů. Jsem si téměř jist, že zásuvný modul najdete tam, ale nemohu odhadnout, který z nich to je. To také znamená, že nemohu zjistit, zda je tento zásuvný modul nainstalován a nemohu vás informovat o dostupných aktualizacích. Ačkoli může zásuvný modul fungovat. Prosim kontaktujte autora zásuvného modulu a sdělte mu tento problém.
+
Plugin installed successfully
- Zásuvný modul byl úspěšně nainstalován
+
Plugin reinstalled successfully
- Zásuvný modul byl úspěšně přeinstalován
+
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
- Zásuvný modul závisní na komponentech, které ve vašem systému chybějí. Je potřeba nainstalovat následující Python moduly:
+
The plugin is broken. Python said:
- Zásuvný modul je poškozen. Python říká:
+
Plugin uninstall failed
- Odinstalování zásuvného modulu selhalo
+
Are you sure you want to uninstall the following plugin?
- Jste si jistý, že chcete odinstalovat následující zásuvné moduly?
+
Warning: this plugin isn't available in any accessible repository!
- Varování: tento zásuvný modul není dostupný v žádném dostupném zdroji!
+
Plugin uninstalled successfully
- Zásuvný modul byl úspěšně odinstalován
+
Unable to add another repository with the same URL!
- Není možné přidat další zdroj se stejným URL!
+
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
- Jste si jistý, že chcete odstranit následující zrdoje?
+
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
+
+ QGIS Official Plugin Repository
+
Nothing to remove! Plugin directory doesn't exist:
Nic k odstranění! Adresář zásuvného modulu neexistuje:
-
- QGIS Official Plugin Repository
-
Failed to remove the directory:
Odstranění adresáře selhalo:
@@ -50400,524 +39546,6 @@ You need to restart QGIS in order to reload it.
Check permissions or remove it manually
Zkontrolujte přístupová práva nebo je odeberte manuálně
-
- QGIS Plugin Conflict:
- Konflikt zásuvných modulů QGISu:
-
-
- The Plugin Installer has detected an obsolete plugin which masks a newer version shipped with this QGIS version. This is likely due to files associated with a previous installation of QGIS. Please use the Plugin Installer to remove that older plugin in order to unmask the newer version shipped with this copy of QGIS.
- Instalátor zásuvných modulů zjistil zastaralý zásuvný modul který zakrývá novější verzi dodanou s touto verzí QGISu. To je nejspíše kvůli souborům asociovaných s předchozí instalací QGISu. Použijte prosím Instalátor zásuvných modulů k odstranění starého modulu, aby se odblokovala novější verze dodaná s touto kopií QGISu.
-
-
-
- QgsPluginInstallerDialog
-
- QGIS Python Plugin Installer
- QGIS instalátor Python zásuvných modulů
-
-
- Error reading repository:
- Chyba při čtení zdroje:
-
-
- all repositories
- všechny zdroje
-
-
- connected
- připojeno
-
-
- This repository is connected
- Zdroj je připojen
-
-
- unavailable
- nedostupný
-
-
- This repository is enabled, but unavailable
- Tento zdroj je povolený, ale nedostupný
-
-
- disabled
- zakázaný
-
-
- This repository is disabled
- Zdroj je zakázaný
-
-
- This repository is blocked due to incompatibility with your Quantum GIS version
- Tento zdroj je blokován kvůli nekompatibilitě s vaší verzí Quantum GIS
-
-
- upgradeable and news
- aktualizovatelný, novinky
-
-
- This plugin is not installed
- Tento zásuvný modul není nainstalován
-
-
- This plugin is installed
- Tento zásuvný modul je nainstalován
-
-
- This plugin is installed, but there is an updated version available
- Tento zásuvný modul je nainstalován, ale jsou dostupné aktualizace
-
-
- This plugin is installed, but I can't find it in any enabled repository
- Tento zásuvný modul je nainstalován, ale nemohu najít dostupný zdroj
-
-
- This plugin is not installed and is seen for the first time
- Tento zásuvný modul není nainstalován a vidím ho poprvé
-
-
- This plugin is installed and is newer than its version available in a repository
- Tento zásuvný modul, který je instalován, je novější než verze dostupná ze zdroje
-
-
- installed version
- nainstalovaná verze
-
-
- available version
- dostupná verze
-
-
- That's the newest available version
- Toto je nejnovější dostupná verze
-
-
- There is no version available for download
- Není verze dostupná ke stažení
-
-
- only locally available
- dostupné pouze lokálně
-
-
- Experimental plugin. Use at own risk
- Experimentální zásuvný modul. Používáte na vlastní riziko
-
-
- - %d plugins available
- - %d zásuvných modulů je dostupných
-
-
- Install plugin
- Instalovat zásuvný modul
-
-
- Reinstall plugin
- Přeinstalovat zásuvný modul
-
-
- Upgrade plugin
- Aktualizovat zásuvný modul
-
-
- Install/upgrade plugin
- instalovat/aktualizovat verzi
-
-
- Downgrade plugin
- Snížit verzi zásuvného modulu
-
-
- Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
- Jste si jistý, že chcete nahrát starší verzi zásuvního modulu? Nainstalovaná verze je novější!
-
-
- Plugin installation failed
- Instalace zásuvného modulu selhala
-
-
- Plugin has disappeared
- Zásuvný modul zmizel
-
-
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
-Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
- Vypadá to, že zásuvný modul byl nainstalován, ale nevím kam. Balíček zásuvného modulu pravděpodobně obsahuje špatně pojmenovaný adresář.
-Prosím prohledejte seznam nainstalovaných zásuvných modulů. Jsem si téměř jist, že zásuvný modul najdete tam, ale nemohu odhadnout, který z nich to je. To také znamená, že nemohu zjistit, zda je tento zásuvný modul nainstalován a nemohu vás informovat o dostupných aktualizacích. Ačkoli může zásuvný modul fungovat. Prosim kontaktujte autora zásuvného modulu a sdělte mu tento problém.
-
-
- Plugin installed successfully
- Zásuvný modul byl úspěšně nainstalován
-
-
- Plugin uninstall failed
- Odinstalování zásuvného modulu selhalo
-
-
- Are you sure you want to uninstall the following plugin?
- Jste si jistý, že chcete odinstalovat následující zásuvné moduly?
-
-
- Warning: this plugin isn't available in any accessible repository!
- Varování: tento zásuvný modul není dostupný v žádném dostupném zdroji!
-
-
- Plugin Installer update uninstalled. Plugin Installer will now close and revert to its primary version. You can find it in the Plugins menu and continue operation.
- Aktualizace Instalátoru zásuvných modulů odinstalována. Instalátor se nyní zavře a vrátí zpět k původní verzi. Najdete ho v menu Zásuvné moduly a pokračovat v operaci.
-
-
- Plugin Installer update uninstalled. Please restart QGIS in order to load its primary version.
- Aktualizace Instalátoru zásuvných modulů odinstalována. Restartujte prosím QGIS abyste mohli načíst původní verzi.
-
-
- Plugin uninstalled successfully
- Zásuvný modul byl úspěšně odinstalován
-
-
- Unable to add another repository with the same URL!
- Není možné přidat další zdroj se stejným URL!
-
-
- Are you sure you want to remove the following repository?
- Jste si jistý, že chcete odstranit následující zrdoje?
-
-
- This plugin is incompatible with your Quantum GIS version and probably won't work.
- Tento zásuvný modul je nekompatibilní s vaší verzí Quantum GIS a pravděpodobně nebude fungovat.
-
-
- This plugin seems to be broken.
-It has been installed but can't be loaded.
-Here is the error message:
- Vypadá to, že tento zásuvný modul je poškozen
-Byl nainstalován, ale nemůže být načten.
-Zde je chybová zpráva:
-
-
- This plugin is broken
- Zásuvný modul je poškozen
-
-
- This plugin requires a newer version of Quantum GIS
- Zásuvný modul vyžaduje novější verzi Quantum GIS
-
-
- This plugin requires a missing module
- Tento zásuvný modul vyžaduje chybějící modul
-
-
- Plugin reinstalled successfully
- Zásuvný modul byl úspěšně přeinstalován
-
-
- The plugin is designed for a newer version of Quantum GIS. The minimum required version is:
- Zásuvný modul je navržen pro novější verzi Quantum GIS. Minimální vyžadovaná verze je:
-
-
- The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
- Zásuvný modul závisní na komponentech, které ve vašem systému chybějí. Je potřeba nainstalovat následující Python moduly:
-
-
- The plugin is broken. Python said:
- Zásuvný modul je poškozen. Python říká:
-
-
- upgradeable
- aktualizovatelný
-
-
- new!
- nové!
-
-
- invalid
- neplatný
-
-
- orphans
- opuštěný
-
-
- any status
- jakýkoliv stav
-
-
- not installed
- nenainstalovaný
-
-
- installed
- instalovaný
-
-
- The required Python module is not installed.
-For more information, please visit its homepage and Quantum GIS wiki.
- Vyžadovaný modul Pythonu není nainstalován.
-Pro více informací navštivte prosím jeho domovskou stránku a Quantum GIS wiki.
-
-
- Note that it's an uninstallable core plugin
- Berte na vědomí, že toto je neodinstalovatelný zásuvný modul jádra
-
-
- at least
- alespoň
-
-
- Python plugin installed.
-Now you need to enable it in Plugin Manager.
- Zásuvný modul Pythonu byl nainstalován.
-Nyní ho musíte povolit ve Správci zásuvných modulů.
-
-
- Python plugin reinstalled.
-You need to restart Quantum GIS in order to reload it.
- Zásuvný modul Pythonu byl přeinstalován.
-Nyní musíte restartovat Quantum GIS, aby se znovu načetl.
-
-
- Python plugin uninstalled. Note that you may need to restart Quantum GIS in order to remove it completely.
- Zásuvný modul Pythonu byl odinstalován. Pro jeho úplné odstranění je potřeba restartovat Quantum GIS.
-
-
- You are about to add several plugin repositories that are neither authorized nor supported by the Quantum GIS team. Plugin authors generally make efforts to ensure that their work is useful and safe, however, we can assume no responsibility for them.
- Chystáte se přidat několik zdrojů zásuvných modulů, které nejsou ani autorizovány ani podporovány Quantum GIS týmem. Autoři zásuvných modulů obvykle vynakládají velké úsilí aby se ujistili, že výsledky jejich práce jsou použitelné a bezpečné, nicméně z jejich strany nemůžeme očekávat žádnou zodpovědnost za případné potíže.
-
-
-
- QgsPluginInstallerDialogBase
-
- QGIS Python Plugin Installer
- QGIS instalátor Python zásuvných modulů
-
-
- Plugins
- Zásuvné moduly
-
-
- List of available and installed plugins
- Seznam dostupných a nainstalovaných zásuvných modulů
-
-
- Filter:
- Filtr:
-
-
- Display only plugins containing this word in their metadata
- Zobrazit jenom zásuvné moduly obsahující toto slovo ve svých metadatech
-
-
- Display only plugins from given repository
- Zobrazit jenom zásuvné moduly z existujícího zdroje
-
-
- all repositories
- všechny zdroje
-
-
- Display only plugins with matching status
- Zobrazit jenom zásuvné moduly s odpovídajícím stavem
-
-
- State
- Stav
-
-
- Status
- Stav
-
-
- Name
- Jméno
-
-
- Version
- Verze
-
-
- Description
- Popis
-
-
- Author
- Autor
-
-
- Repository
- Zdroj
-
-
- Upgrade all
- Aktualizovat vše
-
-
- Install, reinstall or upgrade the selected plugin
- Instalovat, přeinstalovat nebo aktualizovat vybrané zásuvné moduly
-
-
- Install/upgrade plugin
- Instalovat/aktualizovat zásuvný modul
-
-
- Uninstall the selected plugin
- Odinstalovat vybraný zásuvný modul
-
-
- Uninstall plugin
- Odinstalovat zásuvný modul
-
-
- Repositories
- Zdroje
-
-
- List of plugin repositories
- Seznam zdrojů zásuvných modulů
-
-
- URL
- URL
-
-
- Add the contributed repository to the list
- Přidat zdroj přispěvatelů do seznamu
-
-
- Add the contributed repository
- Přidat zdroj přispěvatelů
-
-
- Remove depreciated repositories from the list
- Odebrat znehodnocené zdroje ze seznamu
-
-
- Delete depreciated repositories
- Smazat znehodnocené zdroje
-
-
- Check for updates on startup
- Zkontrolovat aktualizace při spuštění
-
-
- Add third party plugin repositories to the list
- Přidat třetí stranu zdrojů zásuvných modulů na seznam
-
-
- Add 3rd party repositories
- Přidat třetí stranu zdrojů
-
-
- Add a new plugin repository
- Přidat nový zdroj zásuvných modulů
-
-
- Add...
- Přidat...
-
-
- Edit the selected repository
- Upravit vybraný zdroj
-
-
- Edit...
- Editovat...
-
-
- Remove the selected repository
- Odstranit vybraný zdroj
-
-
- Delete
- Smazat
-
-
- The plugins will be installed to ~/.qgis/python/plugins
- Zásuvné moduly budou nainstalovány do ~/.qgis/python/plugins
-
-
- Help
- Nápověda
-
-
- Close the Installer window
- Zavřít okno instalátoru
-
-
- Close
- Zavřít
-
-
- Options
- Možnosti
-
-
- Configuration of the plugin installer
- Nastavení instalátoru zásuvných modulů
-
-
- every time QGIS starts
- při každém startu QGISu
-
-
- once a day
- jednou denně
-
-
- every 3 days
- každé 3 dny
-
-
- every week
- každý týden
-
-
- every 2 weeks
- každé dva týdny
-
-
- every month
- každý měsíc
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, Quantum GIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Installer window.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Poznámka:</span> Pokud je tato funkce zapnuta, Quantum GIS vás bude informovat, zda je k dispozici nový zásuvný modul, nebo aktualizace stávajících. Jinak bude prohledávání repozitářů spuštěno pouze při spuštění Instalátoru zásuvných modulů.</p></body></html>
-
-
- Allowed plugins
- Povolené zásuvné moduly
-
-
- Only show plugins from the official repository
- Zobrazit pouze zásuvné moduly z oficiálního repozitáře
-
-
- Show all plugins except those marked as experimental
- Zobrazit všechny zásuvné moduly kromě experimentálních
-
-
- Show all plugins, even those marked as experimental
- Zobrazit všechny zásuvné moduly včetně experimentálních
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimentální zásuvné moduly nejsou obecně vhodné pro běžné použití. Tyto moduly jsou v rané fázi vývoje a mohly by být považovány za "nekompletní" nástroje nebo za "vyzkoušení konceptu". QGIS nedoporučuje instalaci těchto zásuvných modulů, pokud je nezamýšlíte pouze testovat.</p></body></html>
-
QgsPluginInstallerFetchingDialog
@@ -51043,33 +39671,6 @@ p, li { white-space: pre-wrap; }
Připojuji...
-
- QgsPluginInstallerOldReposBase
-
- Plugin Installer
- Instalátor zásuvných modulů
-
-
- The Plugin Installer has detected that your copy of QGIS is configured to use a number of plugin repositories around the world. It was a typical situation in older versions of the program, but from the version 1.5, external plugins are collected in one central Contributed Repository, and all the old repositories are not necessary any more. Do you want to drop them now? If you're unsure what to do, probably you don't need them. However, if you choose to keep them in use, you will be able to remove them manually later.
- Instalátor zásuvných modulů zjistil, že vaše kopie QGISu je nastavena aby používala množství zdrojů zásuvných modulů z celého světa. To byla typická situace u starších verzí programu, ale od verze 1.5 jsou externí zásuvné moduly soustředěny v jednom centrálním zdroji přispěvatelů zásuvných modulů, takže ostatní staré zdroje již nejsou potřeba. chcete je odstranit nyní? Pokud si nejste jistí, co dělat, pravděpodobně je nepotřebujete. Nicméně, pokud je ponecháte jak jsou, budete moci je odstranit později ručně.
-
-
- Remove
- Odebrat
-
-
- Disable
- Vypnout
-
-
- Keep
- Ponechat
-
-
- Ask me later
- Zeptej se mne později
-
-
QgsPluginInstallerPluginErrorDialog
@@ -51102,24 +39703,16 @@ p, li { white-space: pre-wrap; }
Repository details
Detaily repozitáře
-
- Name:
- Jméno:
-
Enter a name for the repository
Vložte jméno skladu
-
- URL:
- URL:
-
Name
-
Parameters
- Parametry
+
?qgis=
-
URL
- URL
+
QgsPluginManager
+
+ Plugins
+ Zásuvné moduly
+
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
No Plugins
Žádné zásuvné moduly
-
- Only locally available
- category: plugins that are only locally available
-
-
- Reinstallable
- category: plugins that are installed and available
-
-
- Upgradeable
- category: plugins that are installed and there is a newer version available
-
-
- Downgradeable
- category: plugins that are installed and there is an OLDER version available
-
-
- This plugin is incompatible with this version of QGIS
-
-
- Plugin designed for QGIS %1
- compatible QGIS version(s)
-
-
- This plugin requires a missing module
- Tento zásuvný modul vyžaduje chybějící modul
-
-
- This plugin is broken
- Zásuvný modul je poškozen
-
-
- There is a new version available
-
-
- This is a new plugin
-
-
- Installed version of this plugin is higher than any version found in repository
-
-
- This plugin is experimental
-
-
- Category
- Kategorie
-
-
- Tags
-
-
- Author
- Autor
-
-
- More info
-
-
- Installable
- category: plugins that are available for installation
-
-
- This plugin is deprecated
-
-
- %1 rating vote(s)
-
-
- %1 downloads
-
-
- homepage
-
-
- tracker
-
-
- code_ repository
-
-
- Installed version: %1 (in %2)<br/>
-
-
- Available version: %1 (in %2)<br/>
-
-
- changelog:<br/>%1 <br/>
-
-
- Upgrade plugin
- Aktualizovat zásuvný modul
-
-
- Downgrade plugin
- Snížit verzi zásuvného modulu
-
-
- Install plugin
- Instalovat zásuvný modul
-
-
- Reinstall plugin
- Přeinstalovat zásuvný modul
-
-
- Reload all repositories
-
-
- Only show plugins from selected repository
-
-
- Clear filter
-
-
- connected
- připojeno
-
-
- The repository is connected
-
-
- unavailable
- nedostupný
-
-
- The repository is enabled, but unavailable
-
-
- disabled
- zakázaný
-
-
- The repository is disabled
-
-
- The repository is blocked due to incompatibility with your QGIS version
-
-
- Vote sent successfully
-
-
- Sending vote to the plugin repository failed.
-
-
- &Select All
- &Vybrat vše
-
-
- &Clear All
- &Odebrat vše
-
-
- Plugins
- Zásuvné moduly
-
-
- [ incompatible ]
- [ nekompatibilní ]
-
-
- Installed in %1 menu/toolbar
- Instalován v %1 menu/panelu nástrojů
-
No QGIS plugins found in %1
Žádné zásuvné moduly QGISu nenalezeny v %1
- Error
- Chyba
+ Only locally available
+ category: plugins that are only locally available
+
- Failed to open plugin installer!
- Selhalo otevření instalátoru zásuvných modulů!
+ Reinstallable
+ category: plugins that are installed and available
+
+
+ Upgradeable
+ category: plugins that are installed and there is a newer version available
+
+
+ Downgradeable
+ category: plugins that are installed and there is an OLDER version available
+
+
+ Installable
+ category: plugins that are available for installation
+
+
+ This plugin is incompatible with this version of QGIS
+
+
+ Plugin designed for QGIS %1
+ compatible QGIS version(s)
+
+
+ This plugin requires a missing module
+
+
+ This plugin is broken
+
+
+ There is a new version available
+
+
+ This is a new plugin
+
+
+ Installed version of this plugin is higher than any version found in repository
+
+
+ This plugin is experimental
+
+
+ This plugin is deprecated
+
+
+ Category
+
+
+ Tags
+
+
+ Author
+
+
+ More info
+
+
+ %1 rating vote(s)
+
+
+ %1 downloads
+
+
+ homepage
+
+
+ tracker
+
+
+ code_ repository
+
+
+ Installed version: %1 (in %2)<br/>
+
+
+ Available version: %1 (in %2)<br/>
+
+
+ changelog:<br/>%1 <br/>
+
+
+ Upgrade plugin
+
+
+ Downgrade plugin
+
+
+ Install plugin
+
+
+ Reinstall plugin
+
+
+ Reload all repositories
+
+
+ Only show plugins from selected repository
+
+
+ Clear filter
+
+
+ connected
+
+
+ The repository is connected
+
+
+ unavailable
+
+
+ The repository is enabled, but unavailable
+
+
+ disabled
+
+
+ The repository is disabled
+
+
+ The repository is blocked due to incompatibility with your QGIS version
+
+
+ Vote sent successfully
+
+
+ Sending vote to the plugin repository failed.
+
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
QgsPluginManagerBase
-
- QGIS Plugin Manager
- QGIS správce zásuvných modulů
-
-
- To enable / disable a plugin, click its checkbox or description
- Pro povolení / zakázání zásuvného modulu, klikněte na zaškrtávací políčko nebo na popis
-
-
- &Filter
- &Filtr
-
-
- Plugin Directory:
- Adresář zásuvného modulu:
-
-
- Directory
- Adresář
-
-
- Plugin Installer
- Instalátor zásuvných modulů
-
Plugin Manager
-
All
-
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
New
-
Not installed plugins seen for the first time
-
Invalid
- Neplatný
+
Broken and incompatible installed plugins
-
Settings
- Nastavení
-
-
- Plugins
- Zásuvné moduly
+
Search
- Hledat
+
Not installed
-
about:blank
- about:blank
+
Upgrade all upgradeable plugins
-
Upgrade all
- Aktualizovat vše
+
Uninstall the selected plugin
- Odinstalovat vybraný zásuvný modul
+
Uninstall plugin
- Odinstalovat zásuvný modul
+
Install, reinstall or upgrade the selected plugin
- Instalovat, přeinstalovat nebo aktualizovat vybrané zásuvné moduly
+
Reinstall plugin
- Přeinstalovat zásuvný modul
+
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
Check for updates on startup
- Zkontrolovat aktualizace při spuštění
+
every time QGIS starts
- při každém startu QGISu
+
once a day
- jednou denně
+
every 3 days
- každé 3 dny
+
every week
- každý týden
+
every 2 weeks
- každé dva týdny
+
every month
- každý měsíc
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimentální zásuvné moduly nejsou obecně vhodné pro běžné použití. Tyto moduly jsou v rané fázi vývoje a mohly by být považovány za "nekompletní" nástroje nebo za "vyzkoušení konceptu". QGIS nedoporučuje instalaci těchto zásuvných modulů, pokud je nezamýšlíte pouze testovat.</p></body></html>
+
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Status
- Stav
+
Name
-
URL
- URL
+
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Add a new plugin repository
- Přidat nový zdroj zásuvných modulů
+
Add...
- Přidat...
+
Edit the selected repository
- Upravit vybraný zdroj
+
Edit...
- Editovat...
+
Remove the selected repository
- Odstranit vybraný zdroj
+
Delete
- Smazat
+
@@ -51765,14 +40302,6 @@ p, li { white-space: pre-wrap; }
Label Font
Typ písma popisky
-
- Circle color
- Barva kruhu
-
-
- Label color
- Barva popisky
-
The point displacement renderer only applies to (single) point layers.
@@ -51867,7 +40396,7 @@ p, li { white-space: pre-wrap; }
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Query failed: %1
Error: no result buffer
Chyba: Dotaz selhal: %1
-Chyba: žádný buffer výsledku
-
-
- Not logged query failed: %1
-Error: no result buffer
- Nezaznamenaný dotaz selhal: %1
Chyba: žádný buffer výsledku
@@ -52075,21 +40598,41 @@ Výsledek: %3 (%4)
Point
Bod
+
+ Multipoint
+ Multibod
+
Line
Linie
+
+ Multiline
+ Multilinie
+
Polygon
Polygon
+
+ Multipolygon
+ Multipolygon
+
No Geometry
Žádná geometrie
+
+ Unknown Geometry
+ Neznámá geometrie
+
None
@@ -52121,290 +40664,9 @@ Výsledek: %3 (%4)
PQgetCancel failed
PQgetCancel selhal
-
- Multipoint
- Multibod
-
-
- Multiline
- Multilinie
-
-
- Multipolygon
- Multipolygon
-
-
- Unknown Geometry
- Neznámá geometrie
-
-
-
- QgsPostgresFeatureIterator
-
- feature %1 not found
- prvek (%1) nenalezen
-
-
- PostGIS
- PostGIS
-
-
- found %1 features instead of just one.
- nalezeno %1 prvků místo pouze jednoho.
-
QgsPostgresProvider
-
- Unable to access relation
- Nelze přistoupit k relaci
-
-
- PostgreSQL in recovery
- PostgreSQLse obnovuje
-
-
- PostgreSQL is still in recovery after a database crash
-(or you are connected to a (read-only) slave).
-Write accesses will be denied.
- PostgreSQL je stále v obnově po spdanutí databáze
-(nwbo jste připojen k vedlejší (pouze ke čtení)).
-Přístupy k zápisu budou zamítnuty.
-
-
- Unable execute the query
- Nemohu spustit dotaz
-
-
- Unable to execute the query.
-The error message from the database was:
-%1.
-SQL: %2
- Nemohu spustit dotaz.
-Chybová zpráva z databáze byla:
-%1.
-SQL: %2
-
-
- No suitable key column in table
- Žádný vhodný sloupec s klíčem v tabulce
-
-
- The table has no column suitable for use as a key.
-
-Quantum GIS requires that the table either has a column of type
-int4 with a unique constraint on it (which includes the
-primary key), has a PostgreSQL oid column or has a ctid
-column with a 16bit block number.
-
- Tabulka nemá žádný sloupec použitelný jako klíč.
-
-Quantum GIS vyžaduje, aby tabulka měla buď sloupec typu
-int4 s jedinečným omezením (které zahrnuje
-primární klíč), PostgreSQL oid sloupec nebo ctid
-sloupec s 16bit blokovým číslem.
-
-
- The unique index on column '%1' is unsuitable because Quantum GIS does not currently support non-int4 type columns as a key into the table.
-
- Jedinečný index ve sloupci '%1' není vhodný, protože Quantum GIS zatím nepodporuje non-int4 typ sloupce jako klíč pro tabulku.
-
-
-
- and
- a
-
-
- The unique index based on columns %1 is unsuitable because Quantum GIS does not currently support multiple columns as a key into the table.
-
- Jedinečný index založený na sloupcích '%1' není vhodný, protože Quantum GIS zatím nepodporuje více sloupců jako klíč pro tabulku.
-
-
- Unable to find a key column
- Nelze nalézt sloupec s klíčem
-
-
- and is suitable.
- a je vhodný.
-
-
- and has a suitable constraint)
- a má vhodné omezení)
-
-
- and does not have a suitable constraint)
- a nemá vhodné omezení)
-
-
- The view '%1.%2' has no column suitable for use as a unique key.
-Quantum GIS requires that the view has a column that can be used as a unique key. Such a column should be derived from a table column of type int4 and be a primary key, have a unique constraint on it, or be a PostgreSQL oid column. To improve performance the column should also be indexed.
-The view you selected has the following columns, none of which satisfy the above conditions:
- Pohled '%1.%2' nemá sloupec použitelný jako unikátní klíč.
-Quantum GIS vyžaduje, aby pohled měl sloupec použitelný jako unikátní klíč. Takový sloupec by měl být odvozen ze sloupce tabulky typu int4 a být primární klíč, s jedinečným omezením, nebo být sloupce PostgreSQL oid. Pro zlepšení výkonu by měl být sloupec také naindexovaný.
-Vámi vybraný pohled má následující sloupce, ale žádný z nich nesplňuje výše uvedené podmínky:
-
-
- No suitable key column in view
- Žádný vhodný klíč v pohledu
-
-
- Unknown geometry type
- Neznámý typ geometrie
-
-
- Column %1 in %2 has a geometry type of %3, which Quantum GIS does not currently support.
- Sloupec %1 v %2 má geometrii typu %3, kterou Quantum GIS zatím nepodporuje.
-
-
- Quantum GIS was unable to determine the type and srid of column %1 in %2. The database communication log was:
-%3
- Quantum GIS nebyl schopen určit typ a srid sloupce %1 v %2. Výpis komunikace s databází je:
-%3
-
-
- Unable to get feature type and srid
- Nelze získat typ objektu a srid
-
-
- Query failed
- Dotaz selhal
-
-
- %1 cursor states lost.
-SQL: %2
-Result: %3 (%4)
- %1 stavů kurzoru ztraceno.
-SQL: %2
-Výsledek: %3 (%4)
-
-
- Error while adding features
- Chyba při přidávání prvků
-
-
- No PostGIS Support!
- Žádná podpora PostGIS!
-
-
- Your database has no working PostGIS support.
-
- Vaše databáze memá funkční podporu PostGIS.
-
-
-
- No GEOS Support!
- Bez podpory GEOS!
-
-
- Your PostGIS installation has no GEOS support.
-Feature selection and identification will not work properly.
-Please install PostGIS with GEOS support (http://geos.refractions.net)
- Vaše instalace PostGIS nemá podporu knihovny GEOS.
-Výběr objektů a identifikace nebudou pracovat správně.
-Prosím nainstalujte PostGIS s podporou GEOS (http://geos.refractions.net)
-
-
- Ambiguous field!
- Nejasné pole!
-
-
- Duplicate field %1 found
-
- Nalezeno duplicitní pole %1
-
-
-
- Error while deleting features
- Chyba při mazání prvků
-
-
- Error while adding attributes
- Chyba při přidávání atributů
-
-
- Error while deleting attributes
- Chyba při mazání atributů
-
-
- Error while changing attributes
- Chyba při změně atributů
-
-
- Error while changing geometry values
- Chyba při změnách geometrie
-
-
- unexpected PostgreSQL error
- neočekávaný PostgreSQL error
-
-
- Whole number (integer - 32bit)
- Celé číslo (integer - 32bit)
-
-
- Whole number (integer - 64bit)
- Celé číslo (integer - 64bit)
-
-
- Text, limited variable length (varchar)
- Text, omezená proměnná délka (varchar)
-
-
- Text, unlimited length (text)
- Text, neomezená délka (text)
-
-
- '%1' derives from '%2.%3.%4'
- '%1' je odvozené z '%2.%3.%4'
-
-
- and is not suitable (type is %1)
- a není vhodné (typ je %1)
-
-
- Note: '%1' initially appeared suitable but does not contain unique data, so is not suitable.
-
- Poznámka: '%1' zprvu se zdál být vhodný ale neobsahuje jedinečná data, proto není vhodný.
-
-
-
- Unable to access the %1 relation.
-The error message from the database was:
-%2.
-SQL: %3
- Nemohu přistupovat k relaci %1 .
-Chybová zpráva z databáze byla:
-%2.
-SQL: %3
-
-
- Unable to determine table access privileges for the %1 relation.
-The error message from the database was:
-%2.
-SQL: %3
- Nemohu určit oprávnění pro přístup k tabulce pro relaci %1 .
-Chybová zpráva z databáze byla:
-%2.
-SQL: %3
-
-
- Whole number (smallint - 16bit)
- Celé číslo (smallint - 16bit)
-
invalid PostgreSQL layer
@@ -52445,7 +40707,22 @@ SQL: %3
PostgreSQL layer has no primary key.
-
+
+ Whole number (smallint - 16bit)
+ Celé číslo (smallint - 16bit)
+
+
+ Whole number (integer - 32bit)
+ Celé číslo (integer - 32bit)
+
+
+ Whole number (integer - 64bit)
+ Celé číslo (integer - 64bit)
Text, pevná délka (char)
- Couldn't get the feature geometry in binary form
- Nemohu získat geometrii prvku v binární formě
+ Text, limited variable length (varchar)
+ Text, omezená proměnná délka (varchar)
+
+
+ Text, unlimited length (text)
+ Text, neomezená délka (text)
+
+
+ Date
+ Datum
+
+
+ PostgreSQL layer has unknown primary key type.
+
Read attempt on an invalid postgresql data source
Pokus o čtení na neplatném datovém zdroji postgresql
-
- nextFeature() without select()
- nextFeature() bez select()
-
-
- Fetching from cursor %1 failed
-Database error: %2
- Vyvolání z kurzoru %1 selhalo
-Chyba databáze: %2
-
-
- feature %1 not found
- prvek (%1) nenalezen
-
-
- found %1 features instead of just one.
- nalezeno %1 prvků místo pouze jednoho.
-
FAILURE: Field %1 not found.
@@ -52515,43 +40790,74 @@ Chyba databáze: %2
Field %1 ignored, because of unsupported type %2
Pole %1 ignorováno, protože jde o nepodporovaný typ %2
-
- The custom query is not a select query.
- Vlastní dotaz není výběrový dotaz.
-
-
- The table has no column suitable for use as a key. Quantum GIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
- Tabulka nemá sloupec vhodný jako kllíč. Quantum GIS vyžaduje primární klíč, PostgreSQL oid sloupec nebo ctid pro tabulky.
-
-
- Primary key field '%1' for view not unique.
- Pole primárního klíče '%1' pro zobrazení není unikátní.
-
-
- Type '%1' of primary key field '%2' for view invalid.
- Typ '%1' pole primárního klíče '%2' pro zobrazení je neplatný.
-
-
- Date
- Datum
-
-
- PostgreSQL layer has unknown primary key type.
-
Field %1 ignored, because of unsupported type type %2
Pole %1 ignorováno, protože jde o nepodporovaný typ %2
+
+ Duplicate field %1 found
+
+ Nalezeno duplicitní pole %1
+
+
+
+ Unable to access the %1 relation.
+The error message from the database was:
+%2.
+SQL: %3
+ Nemohu přistupovat k relaci %1 .
+Chybová zpráva z databáze byla:
+%2.
+SQL: %3
+
+
+ PostgreSQL is still in recovery after a database crash
+(or you are connected to a (read-only) slave).
+Write accesses will be denied.
+ PostgreSQL je stále v obnově po spdanutí databáze
+(nwbo jste připojen k vedlejší (pouze ke čtení)).
+Přístupy k zápisu budou zamítnuty.
+
+
+ Unable to determine table access privileges for the %1 relation.
+The error message from the database was:
+%2.
+SQL: %3
+ Nemohu určit oprávnění pro přístup k tabulce pro relaci %1 .
+Chybová zpráva z databáze byla:
+%2.
+SQL: %3
+
+
+ The custom query is not a select query.
+ Vlastní dotaz není výběrový dotaz.
+
+
+ Unable to execute the query.
+The error message from the database was:
+%1.
+SQL: %2
+ Nemohu spustit dotaz.
+Chybová zpráva z databáze byla:
+%1.
+SQL: %2
+
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
+
+ Primary key field '%1' for view not unique.
+ Pole primárního klíče '%1' pro zobrazení není unikátní.
PostgreSQL version: unknown
-
unknown
- neznámé
+
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -52656,7 +40962,7 @@ PostGIS %2
Loading layer %1
-
Nemohu otevřít jednu nebo více vrstev projektu.
Zvolte "Ignorovat" pro pokračování bez chybějících vrstev. Zvolte "Storno" pro návrat to předprojektové fáze. Zvolte "Ok", pokud se chcete pokusit najít chybějící vrstvy.
-
- Unable to open one or more project layers
-Try to find missing layers?
- Nemohu otevřít jednu nebo více vrstev projektu.
-Chcete zkusit najít chybějící vrstvy?
-
QgsProjectLayerGroupDialog
@@ -52732,14 +41032,10 @@ Chcete zkusit najít chybějící vrstvy?
Select project file
Vyberte soubor projektu
-
- QGis files
- QGis soubory
-
QGIS files
- QGis soubory
+
QgsProjectProperties
- Layer
Vrstva
- Type
Typ
- Identifiable
Identifikovatelná
- Vector
Vektor
- WMS
WMS
- Raster
Rastr
- Coordinate System Restriction
Omezení souřadnicového systému
- No coordinate systems selected. Disabling restriction.
Nevybrány žádné souřadnicové systémy.Vypínám omezení.
- Selection color
Barva výběru
- Measure tool (CRS transformation: %1)
Nástroj měření (SRS transformace: %1)
- Canvas units (CRS transformation: %1)
Jednotky mapy (SRS transformace: %1)
+ OFF
Vypnuto
+ ON
Zapnuto
- CRS %1 was already selected
SRS %1 už byl vybrán
- Coordinate System Restrictions
Omezení souřadnicového sstému
- The current selection of coordinate systems will be lost.
Proceed?
Aktuální výběr souřadnicového systému bude ztracen.
Pokračovat?
- Select print composer
Vyberte tvůrce mapy
- Composer Title
Nadpis Tvůrce
- Select restricted layers and groups
Vyberte omezeé vrstvy a skupiny
- Enter scale
Zadejte měřítko
- Scale denominator
Jmenovatel měřítka
- Load scales
Načíst měřítka
- XML files (*.xml *.XML)
XML soubory (*.xml *.XML)
- Save scales
Uložit měřítka
- Parameters :
- Parametry :
-
-
- Parameters:
- Parametry:
-
-
- Select %1 from pull-down menu to adjust radii
-
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
- Lze použít pouze elipsoidální výpočty, pokud je zapnuta SRS transformace
-
-
- Transparency %1%
- Průhlednost %1%
-
-
- Select a valid symbol
Vyberte platný symbol
- Invalid symbol :
Neplatný symbol :
+
+ Parameters:
+ Parametry:
+
+
+ Select %1 from pull-down menu to adjust radii
+
+
+ Can only use ellipsoidal calculations when CRS transformation is enabled
+ Lze použít pouze elipsoidální výpočty, pokud je zapnuta SRS transformace
+
QgsProjectPropertiesBase
@@ -52943,34 +41231,10 @@ Pokračovat?
Vlastnosti projektu
- Meters
- Metry
-
-
- Feet
- Stopy
-
-
- Decimal degrees
- Stupně
-
-
- Default project title
- Standardní název projektu
-
-
- Automatic
- Automaticky
-
-
- Automatically sets the number of decimal places in the mouse position display
- Automaticky nastaví počet desetinných míst v zobrazování polohy myši (kurzoru)
+ General
+ Obecné
Obecná nastavení
- Layer units (only used when CRS transformation is disabled)
- Jednotky vrstvy (pouze když je vypnutá SRS transformace)
+ Project title
+ Název projektu
- Degrees, Minutes, Seconds
- Stupně, Minuty, Sekundy
+ Descriptive project name
+ Popis názvu projektu
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
- Počet desetinných míst, které jsou použity při zobrazování polohy myši je automaticky nastaven tak aby posun myši o jeden pixel způsobil změnu v zobrazení polohy
+ Default project title
+ Standardní název projektu
- Manual
- Manuálně
+ Selection color
+ Výběr barvy
- WMS
- WMS
+ Background color
+ Barva pozadí
- WMS Server
- WMS server
+ absolute
+ absolutně
- OWS Server
- OWS Server
+ relative
+ relativně
- Service Capabilitities
- Schopnosti služby
+ Save paths
+ Uložit cesty
- Title
- Titul
+ Measure tool
+ Nástroj pro měření
- Person
- Osoba
+ Semi-minor
+ Vedlejší poloosa
- Defaut styles
- Výchozí styly
+ Semi-major
+ Hlavní poloosa
- Default symbols
- Výchozí symboly
+ Used when CRS transformation is turned off
+ Použije se, když je SRS transformace vypnuta
- Transparency
- Průhlednost
+ Canvas units
+ Jednotky mapového okna
- %
- %
+ Meters
+ Metry
- Service capabilitities
- Schopnosti služby
-
-
- Phone
- Telefon
-
-
- Abstract
- Abstrakt
-
-
- E-Mail
- E-Mail
-
-
- Organization
- Organizace
-
-
- Online resource
- Online zdroj
-
-
- WMS Capabilitities
- WMS schopnosti
-
-
- Advertised Extent
- Uváděný rozsah
-
-
- Min. X
- Min. X
-
-
- Min. Y
- Min. Y
-
-
- Max. X
- Max. X
-
-
- Max. Y
- Max. Y
-
-
- Use Current Canvas Extent
- Použít rozsah aktuálního mapového okna
-
-
- Coordinate Systems Restrictions
- Omezení souřadnicového systému
-
-
- Add
- Přidat
-
-
- Remove
- Odebrat
-
-
- Used
- Použitý
-
-
- Add WKT geometry to feature info response
- Přidat WKT geometry k odpovědi informací o prvku
-
-
- Project scales
- Měřítka projektu
-
-
- ...
- ...
-
-
- Marker
- Značka
-
-
- Line
- Linie
-
-
- Fill
- Výplň
-
-
- Color Ramp
- Barevná stupnice
-
-
- Style Manager
- Správce stylů
-
-
- Options
- Možnosti
-
-
- Assign random colors to symbols
- Přiřadit symbolům náhodné barvy
-
-
- Opacity
- Průhlednost
-
-
- Maximum width
- Maximální šířka
-
-
- Maximum height
- Maximální výška
-
-
- WFS Capabilitities
- WFS schopnosti
-
-
- Published
- Publikováno
-
-
- Macros
- Makra
-
-
- Service capabilities
-
-
- Fees
- Poplatky
-
-
- Access constraints
- Omezení přístupu
-
-
- Keyword list
- Seznam klíčových slov
-
-
- WMS capabilitities
- WMS schopnosti
-
-
- Add geometry to feature response
-
-
- Exclude layers
- Vyloučit vrstvy
-
-
- Advertised URL
- Uváděné URL
-
-
- Width
- Šířka
-
-
- Height
- Výška
-
-
- Maximums for GetMap request
- Maxima pro požadavek GetMap
-
-
- Advertised extent
- Uváděný rozsah
-
-
- CRS restrictions
- SRS omezení
-
-
- Exclude composers
- Vyloučit Tvůrce map
-
-
- WFS capabilitities
- WFS schopnosti
-
-
- Update
- Aktualizovat
-
-
- Insert
- Vložit
-
-
- Delete
- Smazat
-
-
- Unselect all
- Zrušit výběr
-
-
- Select all
- Vybrat vše
-
-
- WCS capabilities
-
-
- Python macros
- Python makra
-
-
- Avoid intersections of new polygons...
- Vyvarovat se protnutí nových polygonů...
-
-
- Identifiable layers
- Identifikovatelné vrstvy
-
-
- Project layers
- Vrstvy projektu
-
-
- Layer
- Vrstva
-
-
- Type
- Typ
-
-
- Identifiable
- Identifikovatelný
-
-
- Sets the number of decimal places to use for the mouse position display
- Nastaví počet desetinných míst použitých při zobrazování polohy myši
+ Feet
+ Stopy
OWS Server
- Relations
- Vztahy
-
-
- absolute
- absolutně
-
-
- relative
- relativně
-
-
- Save paths
- Uložit cesty
-
-
- Project file
- Soubor projektu
-
-
- Measure tool
- Nástroj pro měření
-
-
- Ellipsoid
(for distance calculations)
Elipsoid
(pro výpočty vzdáleností)
- Semi-major
- Hlavní poloosa
-
-
- Semi-minor
- Vedlejší poloosa
-
-
- Used when CRS transformation is turned off
- Použije se, když je SRS transformace vypnuta
-
-
- Canvas units
- Jednotky mapového okna
-
-
- Degree
Stupeň
- Nautical miles
-
-
- Degree display
Zobrazení ve stupních
- Decimal degrees
+ Stupně
+
+
+ Degrees, Minutes
Stupně, Minuty
- The number of decimal places for the manual option
- Počet desetinných míst pro manuální volbu
+ Degrees, Minutes, Seconds
+ Stupně, Minuty, Sekundy
- decimal places
- desetinná místa
-
-
- WMS capabilities
-
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
-
- WFS capabilities
-
-
- General
- Obecné
-
-
- Digitizing
- Digitalizace
-
-
- Precision
Přesnost
- Descriptive project name
- Popis názvu projektu
+ Automatically sets the number of decimal places in the mouse position display
+ Automaticky nastaví počet desetinných míst v zobrazování polohy myši (kurzoru)
- Enable topological editing
- Povolit editaci topologie
+ The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
+ Počet desetinných míst, které jsou použity při zobrazování polohy myši je automaticky nastaven tak aby posun myši o jeden pixel způsobil změnu v zobrazení polohy
- Snapping options...
- Nastavení uchycení...
+ Automatic
+ Automaticky
- Project title
- Název projektu
+ Sets the number of decimal places to use for the mouse position display
+ Nastaví počet desetinných míst použitých při zobrazování polohy myši
- Selection color
- Výběr barvy
+ Manual
+ Manuálně
- Background color
- Barva pozadí
+ The number of decimal places for the manual option
+ Počet desetinných míst pro manuální volbu
- Coordinate Reference System (CRS)
- Souřadnicový referenční systém (SRS/CRS)
+ decimal places
+ desetinná místa
- Project scales
+ Měřítka projektu
+
+
+ ...
+ ...
+
+
+ Enable 'on the fly' CRS transformation
Povolit 'on-the-fly' SRS transformaci
+
+ Identifiable layers
+ Identifikovatelné vrstvy
+
+
+ Project layers
+ Vrstvy projektu
+
+
+ Layer
+ Vrstva
+
+
+ Type
+ Typ
+
+
+ Identifiable
+ Identifikovatelný
+
+
+ Marker
+ Značka
+
+
+ Line
+ Linie
+
+
+ Default symbols
+ Výchozí symboly
+
+
+ Fill
+ Výplň
+
+
+ Color Ramp
+ Barevná stupnice
+
+
+ Transparency
+ Průhlednost
+
+
+ %
+ %
+
+
+ Style Manager
+ Správce stylů
+
+
+ Options
+ Možnosti
+
+
+ Relations
+
+
+ Nautical miles
+
+
+ Assign random colors to symbols
+ Přiřadit symbolům náhodné barvy
+
+
+ Service capabilities
+
+
+ Person
+ Osoba
+
+
+ Title
+ Titul
+
+
+ Organization
+ Organizace
+
+
+ Online resource
+ Online zdroj
+
+
+ E-Mail
+ E-Mail
+
+
+ Phone
+ Telefon
+
+
+ Abstract
+ Abstrakt
+
+
+ Fees
+ Poplatky
+
+
+ Access constraints
+ Omezení přístupu
+
+
+ Keyword list
+ Seznam klíčových slov
+
+
+ WMS capabilities
+
+
+ Add geometry to feature response
+
+
+ Min. X
+ Min. X
+
+
+ Min. Y
+ Min. Y
+
+
+ Max. X
+ Max. X
+
+
+ Max. Y
+ Max. Y
+
+
+ Use Current Canvas Extent
+ Použít rozsah aktuálního mapového okna
+
+
+ Used
+ Použitý
+
+
+ Exclude composers
+ Vyloučit Tvůrce map
+
+
+ WFS capabilities
+
+
+ WCS capabilities
+
+
+ Exclude layers
+ Vyloučit vrstvy
+
+
+ Quality for JPEG images ( 10 : smaller image - 100 : best quality )
+
+
+ Published
+ Publikováno
+
+
+ Update
+ Aktualizovat
+
+
+ Insert
+ Vložit
+
+
+ Delete
+ Smazat
+
+
+ Unselect all
+ Zrušit výběr
+
+
+ Select all
+ Vybrat vše
+
+
+ Macros
+ Makra
+
+
+ Advertised URL
+ Uváděné URL
+
+
+ Width
+ Šířka
+
+
+ Height
+ Výška
+
+
+ Maximums for GetMap request
+ Maxima pro požadavek GetMap
+
+
+ Advertised extent
+ Uváděný rozsah
+
+
+ CRS restrictions
+ SRS omezení
+
+
+ Python macros
+ Python makra
+
QgsProjectionSelector
-
- All
- Všechno
-
User Defined Coordinate Systems
@@ -53558,14 +41740,6 @@ Pokračovat?
Projected Coordinate Systems
Promítnutý souřadnicový systém
-
- Find projection
- Najít projekci
-
-
- No matching projection found.
- Souhlasící projekce nenalezena.
-
Resource Location Error
@@ -53582,34 +41756,11 @@ Because of this the projection selector will not work...
QgsProjectionSelectorBase
-
- Authority ID
- ID autority
-
-
- Search
- Hledat
-
-
- Find
- Najít
-
-
- Name
- Název
-
Coordinate Reference System Selector
Výběr souřadnicového referenčního systému
-
- Selected CRS:
-
Filter
@@ -53626,6 +41777,17 @@ Because of this the projection selector will not work...
Coordinate Reference System
Souřadnicový referenční systém
+
+ Selected CRS:
+
+
+ Authority ID
+ ID autority
+
Coordinate reference systems of the world
Souřadnicový referenční systém světa
-
- Authority
- Autorita
-
-
- Search for
- Hledat co
-
Hide deprecated CRSs
Skrýt neschválené SRS
-
- Recently used coordinate references systems
- Naposledy použité souřadnicové referenční systémy
-
QgsQueryBuilder
@@ -53667,26 +41817,10 @@ Because of this the projection selector will not work...
&Clear
&Vyčistit
-
- Invalid Query
- Neplatný dotaz
-
-
- Setting the query failed
- Nastavení dotazu selhalo
-
-
- No Query
- Žádný dotaz
-
-
- You must create a query before you can test it
- Musíte vytvořit dotaz před jeho testováním
-
Set provider filter on %1
-
The where clause returned %n row(s).
returned test rows
-
- Podmínka where vrátila %n řádek.
- Podmínka where vrátila %n řádky.
- Podmínka where vrátila %n řádek.
-
+ Podmínka where vrátila %n řádek. Podmínka where vrátila %n řádky. Podmínka where vrátila %n řádek.
-
- An error occurred when executing the query
- Při spouštění dotazu došlo k chybě
-
Error in Query
@@ -53763,7 +41889,7 @@ Poskytovatel dat řekl:
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -53779,7 +41905,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -53790,7 +41916,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -53806,7 +41932,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -53901,67 +42027,7 @@ p, li { white-space: pre-wrap; }
Provider specific filter expression
-
-
- SQL where clause
- SQL podmínka where
-
-
-
- QgsQuickPrint
-
- km
- km
-
-
- mm
- mm
-
-
- cm
- cm
-
-
- m
- m
-
-
- miles
- míle
-
-
- mile
- míle
-
-
- inches
- palce
-
-
- foot
- stopa
-
-
- feet
- stopy
-
-
- degree
- stupeň
-
-
- degrees
- stupně
-
-
- unknown
- neznámé
-
-
- Please wait while your report is generated
- COMMENTED OUT
- Čekejte prosím, dokud nebude vaše zpráva vytvořena
+
@@ -53970,29 +42036,29 @@ p, li { white-space: pre-wrap; }
Editable
- Editovatelný
+ Editovatelný
Slider
- Posuvník
+ Posuvník
Dial
- Číselník
+
Current minimum for this value is %1 and current maximum is %2.
- Aktuální minimum pro tuto hodnotu je %1 a aktuální maximum je %2.
+
Attribute has no integer or real type, therefore range is not usable.
- Atribut není celé číslo ani reálné, proto není rozsah použitelný.
+
@@ -54000,32 +42066,32 @@ p, li { white-space: pre-wrap; }
Form
- Formulář
+
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
- Umožňuje nastavit číselné hodnoty z určeného rozsahu. Editovací doplněk může být jak posuvník tak otočný volič.
+
Step
- Krok
+
Maximum
- Maximum
+
Minimum
- Minimum
+
Local minimum/maximum = 0/0
- Lokální minimum/maximum = 0/0
+
@@ -54236,55 +42302,11 @@ p, li { white-space: pre-wrap; }
QgsRasterDataProvider
-
- Identify
- Identifikovat
-
-
- Build Pyramids
- Vytvořit pyramidy
-
-
- Band
- Kanál
-
Format not supported
Formát není podporován
-
- no data
- Žádná data
-
-
- Feature info
- Info o prvku
-
-
- Average
- Průměr
-
-
- Nearest Neighbour
- Nejbližší soused
-
-
- Gauss
- Gauss
-
-
- Cubic
- Kubický
-
-
- Mode
- Režim
-
-
- None
- Žádná
-
Value
@@ -54293,7 +42315,7 @@ p, li { white-space: pre-wrap; }
Text
- Text
+
JPEG compression
JPEG komprese
+
+ Cannot get create options for driver %1
+ Nemohu získat možnosti vytvoření pro ovladač %1
+
+
+ For details on pyramids options please see the following pages
+ Pro detaily o možnostech pyramid si prosím prohlédněte následujícíc stránky
+
+
+ No help available
+ Nápověda není k dispozici
+
cannot validate pyramid options
@@ -54347,6 +42384,11 @@ p, li { white-space: pre-wrap; }
Cannot validate creation options
Nemohu ověřit možnosti vytváření
+
+ Valid
+ Platný
+
Invalid %1:
@@ -54370,26 +42412,6 @@ Klikněte na tlačíko nápovědy k získání platných možností vytváření
creation option
možnost vytvoření
-
- Cannot get create options for driver %1
- Nemohu získat možnosti vytvoření pro ovladač %1
-
-
- For details on pyramids options please see the following pages
- Pro detaily o možnostech pyramid si prosím prohlédněte následujícíc stránky
-
-
- No help available
- Nápověda není k dispozici
-
-
- Valid
- Platný
-
Profile name:
@@ -54476,29 +42498,25 @@ Klikněte na tlačíko nápovědy k získání platných možností vytváření
Visibility
Viditelnost
-
- Show min/max markers
- Zobrazit značky min/max
-
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Display
- Zobrazit
+ Zobrazit
Draw as lines
-
Draw as lines (only int layers)
-
Actions
- Akce
+
Form
Formulář
-
- Band
- Kanál
-
Set min/max style for
-
Nenastavené
- Could not reproject view extent: %1
- Nelze překreslit rozsah zobrazení: %1
+ QgsRasterLayer created
+ Vrstva typu QgsRasterLayer vytvořena
Rastr
- Could not reproject layer extent: %1
- Nelze překreslit rozsah vrstvy: %1
+ No Data Value
+ Hodnota "žádná data"
- Cannot read data
- Nemohu číst data
+ NoDataValue not set
+ Hodnota "Žádná data" není nastavená
- Driver:
- Ovladač:
-
-
- Dimensions:
- Rozměry:
-
-
- Origin:
- Počátek:
-
-
- Pixel Size:
- Velikost pixelu:
-
-
- Pyramid overviews:
- Přehled pyramid:
-
-
- [GDAL] All files (*)
- [GDAL] Všechny soubory (*)
-
-
- This raster file has no bands and is invalid as a raster layer.
- Tento rastrový soubor nemá pásma a je neplatný jako rastrová vrstva.
+ Could not determine raster data type.
+ Nelze rozpoznat typ rastrových dat.
Driver
- Řadič
+
Data Type
- Typ dat
+
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Cell Count
Počet buněk
-
- Specify CRS for layer %1
- Určit CRS pro vrstvu %1
-
-
- Data Type:
- Typ dat:
-
-
- GDT_Byte - Eight bit unsigned integer
- GDT_Byte - Eight bit unsigned integer
-
-
- GDT_UInt16 - Sixteen bit unsigned integer
- GDT_UInt16 - Sixteen bit unsigned integer
-
-
- GDT_Int16 - Sixteen bit signed integer
- GDT_Int16 - Sixteen bit signed integer
-
-
- GDT_UInt32 - Thirty two bit unsigned integer
- GDT_UInt32 - Thirty two bit unsigned integer
-
-
- GDT_Int32 - Thirty two bit signed integer
- GDT_Int32 - Thirty two bit signed integer
-
-
- GDT_Float32 - Thirty two bit floating point
- GDT_Float32 - Thirty two bit floating point
-
-
- GDT_Float64 - Sixty four bit floating point
- GDT_Float64 - Sixty four bit floating point
-
-
- GDT_CInt16 - Complex Int16
- GDT_CInt16 - Complex Int16
-
-
- GDT_CInt32 - Complex Int32
- GDT_CInt32 - Complex Int32
-
-
- GDT_CFloat32 - Complex Float32
- GDT_CFloat32 - Complex Float32
-
-
- GDT_CFloat64 - Complex Float64
- GDT_CFloat64 - Complex Float64
-
-
- Could not determine raster data type.
- Nelze rozpoznat typ rastrových dat.
-
Cannot instantiate the '%1' data provider
@@ -54950,221 +42887,24 @@ Klikněte na tlačíko nápovědy k získání platných možností vytváření
Provider is not valid (provider: %1, URI: %2
Poskytovatel není platný (poskytovatel: %1, URI: %2
-
- Failed to load provider %1 (Reason: %2)
- Selhalo načtení poskytovatele %1 (důvod: %2)
-
-
- Cannot resolve the classFactory function
- Nemohu vyřešit funkci classFactory
-
-
- Cannot instantiate the data provider
- Nemohu konkretizovat poskytovatele dat
-
-
- Data provider is invalid (layers: %1, styles: %2, formats: %3)
- Poskytovatel dat je neplatný (vrstev: %1, stylů: %2, formátů: %3)
-
<maplayer> not found.
<maplayer> nenalezena.
-
- GDAL data type %1 is not supported
- QGIS datový typ %1 není podporován
-
-
- Average
- Průměr
-
-
- Layer Spatial Reference System:
- Referenční prostorový systém vrstvy:
-
-
- Layer Extent (layer original source projection):
- Rozsah vrstvy (původní projekce zdrojové vrstvy):
-
-
- Project Spatial Reference System:
- Referenční prostorový systém projektu:
-
-
- out of extent
- mimo rozsah
-
-
- null (no data)
- null (žádná data)
-
-
- Dataset Description
- Popis datasetu
-
-
- No Data Value
- Hodnota "žádná data"
-
-
- NoDataValue not set
- Hodnota "Žádná data" není nastavená
-
-
- Band %1
- Kanál %1
-
-
- QgsRasterLayer created
- Vrstva typu QgsRasterLayer vytvořena
-
-
- Retrieving stats for %1
- Získávám statistiky pro %1
-
-
- Calculating stats for %1
- Počítám statistiky pro %1
-
-
- X: %1 Y: %2 Bands: %3
- X: %1 Y: %2 Kanálů: %3
-
QgsRasterLayerProperties
-
- Grayscale
- Odstíny šedi
-
-
- Pseudocolor
- Pseudobarvy
-
Not Set
Nenastaveno
-
- From
- Od
-
-
- To
- Do
-
-
- not defined
- není definováno
-
-
- Columns:
- Sloupce:
-
-
- Rows:
- Řádky:
-
-
- No-Data Value:
- Hodnota žádná data:
-
-
- n/a
- n/a
-
-
- Write access denied
- Zápis zamítnut
-
-
- Write access denied. Adjust the file permissions and try again.
-
-
- Zápis zamítnut. Získejte práva pro zápis a zkuste znovu..
-
-
-
-
-
- Building pyramids failed.
- Sestavení pyramid selhalo.
-
-
- Building pyramid overviews is not supported on this type of raster.
- Sestavení náhledu pyramid není pro tento typ rastrového formátu podporováno.
-
-
- No Stretch
- Bez protažení
-
-
- Stretch To MinMax
- Protažení podle MinMax
-
-
- Stretch And Clip To MinMax
- Protažení a ořezání podle MinMax
-
-
- Clip To MinMax
- Ořezání podle MinMax
-
-
- Discrete
- Nespojitý
-
-
- Equal interval
- Stejné intervaly
-
-
- Quantiles
- Kvantily
-
Description
Popis
-
- Value
- Hodnota
-
-
- Color
- Barva
-
-
- Label
- Popisek
-
Large resolution raster layers can slow navigation in QGIS.
@@ -55180,6 +42920,16 @@ Klikněte na tlačíko nápovědy k získání platných možností vytváření
You must have write access in the directory where the original data is stored to build pyramids.
Na vytvoření pyramid je třeba mít práva pro zápis do adresáře, kde jsou uloženy původní data.
+
+ Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
+ Prosím uvědomte si, že vytváření vnitřních pyramid může změnit originální soubor dat a pokud je jednou vytvoříte, nebudou moci být odstraněny!
+
+
+ Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
+ Vytvoření vnitřních pyramid může narušit váš obrázek - vždy nejdříve zálohujte data!
+
Layer Properties - %1
@@ -55251,28 +43001,88 @@ Klikněte na tlačíko nápovědy k získání platných možností vytváření
Indexovaná hodnota
- Filter
- Filtr
+ From
+ Od
- Bands
- Kanály
+ To
+ Do
- Time
- Čas
+ not defined
+ není definováno
- Note: Minimum Maximum values are estimates, user defined, or calculated from the current extent
- Poznámka: Minimální a maximální hodnoty jsou odhady, uživatelem definované nebo vypočtené z aktuálního rozsahu
+ Columns: %1
+ Sloupců: %1
- User Defined
- Definováno uživatelem
+ Rows: %1
+ Řádků: %1
- No-Data Value: Not Set
- Hodnota "Žádná data": není nastavená
+ Columns:
+ Sloupce:
+
+
+ n/a
+ n/a
+
+
+ Rows:
+ Řádky:
+
+
+ No-Data Value:
+ Hodnota žádná data:
+
+
+ No-Data Value: %1
+ Hodnota "žádná data": %1
+
+
+ Write access denied
+ Zápis zamítnut
+
+
+ Write access denied. Adjust the file permissions and try again.
+ Přístup k zápisu zamítnut. Nastavte oprávnění souboru a zkuste znovu.
+
+
+ Building pyramids failed.
+ Sestavení pyramid selhalo.
+
+
+ The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
+ Soubor není přepisovatelný. Některé formáty nepodporují pyramidové přehledy. Pochybnosti konzultujte s dokumentací GDAL.
+
+
+ Building pyramid overviews is not supported on this type of raster.
+ Sestavení náhledu pyramid není pro tento typ rastrového formátu podporováno.
Uložit soubor
- Save layer properties as style file
- Uložit vlastnosti vrstvy jako soubor stylu
-
-
- Textfile (*.txt)
- Textový soubor (*.txt)
+ Textfile
+ Textový soubor
QGIS vygenerovaná hodnota průhlednosti pixelu exportovaného souboru
- Band %1
- Pásmo %1
+ Value
+
- Choose a file name to save the map image as
- Zvolte název, pod kterým se má obrázek mapy uložit
+ Write access denied. Adjust the file permissions and try again.
+
+
+ Zápis zamítnut. Získejte práva pro zápis a zkuste znovu..
+
+
+
Chyba importu
- out of extent
- mimo rozsah
-
-
+ The following lines contained errors
-
- Následující řádky obsahovaly chyby
+%1
+ Následující řádky obsahujíc chyby
-
+%1
-
- Color Ramp
- Barevná stupnice
-
Default Style
Výchozí styl
-
- QGIS Layer Style File (*.qml)
- QGIS soubor stylu vrstvy (*.qml)
-
-
- QGIS
- QGIS
-
-
- Colormap
- Paleta barev
-
-
- Linear
- Lineární
-
-
- Exact
- Přesný
-
-
- Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
- Prosím uvědomte si, že vytváření vnitřních pyramid může změnit originální soubor dat a pokud je jednou vytvoříte, nebudou moci být odstraněny!
-
-
- Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
- Vytvoření vnitřních pyramid může narušit váš obrázek - vždy nejdříve zálohujte data!
-
-
- The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
- Soubor není přepisovatelný. Některé formáty nepodporují pyramidové přehledy. Pochybnosti konzultujte s dokumentací GDAL.
-
-
- Custom color map entry
- Vložení vlastní palety barev
-
-
- QGIS Generated Color Map Export File
- QGISem vytvořený soubor exportu barevných map
-
-
- Load Color Map
- Načíst paletu barev
-
Load layer properties from style file
@@ -55417,70 +43177,9 @@ Klikněte na tlačíko nápovědy k získání platných možností vytváření
Uložený styl
- Note: Minimum Maximum values are actual values computed from the band(s)
- Poznámka: Minimální a maximální hodnoty jsou aktuální hodnoty vypočtené z kanálu/ů
-
-
- <h3>Multiband Image Notes</h3><p>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:</p><ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul>
- COMMENTED OUT
- <h3>Poznámky k vícekanálovým snímkům</h3><p>Toto je vícekanálový snímek. Je možné ho vykreslit v odstínech šedi nebo jako barevnou syntézu (RGB). Barvy v barevných syntézách je možné přiřadit libovolně. Například pokud máte sedmi kanálový snímek z družice LandSat, můžete jej zobrazit jako:</p><ul><li>viditelná modrá (0.45 až 0.52 microns) - nezobrazena</li><li>viditelná zelená (0.52 až 0.60 microns) - nezobrazena</li></li>viditelná červená (0.63 až 0.69 microns) - na snímku zobrazená jako červená</li><li>blízká infračervená (0.76 až 0.90 microns) - na snímku zobrazena jako zelená</li><li>střední infračervená (1.55 až 1.75 microns) - nezobrazena</li><li>tepelná infračervená (10.4 až 12.5 microns) - nezozbrazena</li><li>střední infračervená (2.08 až 2.35 microns) - zobrazena jako modrá</li></ul>
-
-
- <h3>Paletted Image Notes</h3> <p>This image uses a fixed color palette. You can remap these colors in different combinations e.g.</p><ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul>
- COMMENTED OUT
- <h3>Poznámky ke snímkům s paletou</h3> <p>Tento snímek používá pevnou paletu barev. Tyto barvy můžete změnit v různých kombinacích např.</p><ul><li>Červená - na obrázku modrá</li><li>Zelená - na obrázku modrá</li><li>Modrá - na obrázku zelená</li></ul>
-
-
- <h3>Grayscale Image Notes</h3> <p>You can remap these grayscale colors to a pseudocolor image using an automatically generated color ramp.</p>
- COMMENTED OUT
- <h3>Poznámky ke snímkům v odstínech šedi</h3> <p>Je možné přemapovat snímek v odstínech šedi na pseudobarevný obrázek automaticky vygenerovaný barevnou rampou.</p>
-
-
- Default R:%1 G:%2 B:%3
- Výchozí R:%1 G:%2 B:%3
-
-
- Columns: %1
- Sloupců: %1
-
-
- Rows: %1
- Řádků: %1
-
-
- No-Data Value: %1
- Hodnota "žádná data": %1
-
-
- Write access denied. Adjust the file permissions and try again.
- Přístup k zápisu zamítnut. Nastavte oprávnění souboru a zkuste znovu.
-
-
- Textfile
- Textový soubor
-
-
- The following lines contained errors
-
-%1
- Následující řádky obsahujíc chyby
-
-%1
-
-
- The color map for band %1 failed to load
- Selhalo načtení barevné mapy pro kanál %1
-
-
- Unknown style format: %1
- Neznámý formát stylu: %1
+ Save layer properties as style file
+ Uložit vlastnosti vrstvy jako soubor stylu
@@ -55491,29 +43190,29 @@ Klikněte na tlačíko nápovědy k získání platných možností vytváření
Vlastosti rastrové vrstvy
- General
- Obecné
+ Save Style ...
+ Uložit styl ...
- Symbology
- Symbolika
+ Load Style ...
+ Načíst styl ...
- <p align="right">Full</p>
- <p align="right">Úplná</p>
+ Resolutions
+ Rozlišení
- None
- Žádná
+ Save As Default
+ Uložit jako výchozí
- Style
- mRendererTab
- Styl
+ Restore Default Style
+ Obnovit výchozí styl
Převzorkování
- Use original source no data value.
- Použít no data hodnotu původního zdroje dat.
-
-
- No data value:
- Hodnota "žádná data":
-
-
- Original data source no data value, if exists.
- No data hodnota původního zdroje dat, pokud existuje.
-
-
- <src no data value>
- <src no data hodnota>
-
-
- Additional user defined no data value.
-
-
- Additional no data value
-
-
- Metadata
- Metadata
-
-
- Pyramids
- Pyramidy
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:10pt; font-weight:400; font-style:normal;">
-<table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;">
-<tr>
-<td style="border: none;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:11pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></td></tr></table></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:10pt; font-weight:400; font-style:normal;">
-<table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;">
-<tr>
-<td style="border: none;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:11pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></td></tr></table></body></html>
-
-
- Average
- Průměr
-
-
- Nearest Neighbour
- Nejbližší soused
-
-
- Thumbnail
- Miniatury
-
-
- Overview format
- Formát náhledu
-
-
- External
- Externí
-
-
- Resolutions
- Rozlišení
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell'; font-size:11pt;"><br /></span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell'; font-size:11pt;"><br /></span></p></body></html>
-
-
- Internal (if possible)
- Interní (pokud je to možné)
-
-
- External (Erdas Imagine)
- Externí (Erdas Imagine)
-
-
- Histogram
- Histogram
-
-
- Options
- Možnosti
-
-
- Chart Type
- Typ grafu
-
-
- Refresh
- Obnovit
-
-
- Max
- Max
-
-
- Min
- Min
-
-
- 00%
- 00%
-
-
- Render as
- Vykreslit jako
-
-
- ...
- ...
-
-
- Colormap
- Paleta barev
-
-
- Delete entry
- Odstranit vstup
-
-
- Classify
- Klasifikovat
-
-
- 1
- 1
-
-
- 2
- 2
-
-
- Single band gray
- Jednoduché pásmo šedi
-
-
- Style
- Styl
-
-
- Three band color
- Tři pásma barev
-
-
- RGB mode band selection and scaling
- RGB styl výběru a rozdělení pásma
-
-
- Red band
- Červené pásmo
-
-
- Green band
- Zelené pásmo
-
-
- Blue band
- Modré pásmo
-
-
- Save current RGB composition as default. This setting will be persistent between QGIS sessions.
- Uložit aktuální RGB skladbu jako výchozí. Toto nastavení bude trvalé a nesmaže se restartem QGISu.
-
-
- Custom min / max values
- Uživatelské hodnoty min / max
-
-
- Red min
- Červené min
-
-
- Red max
- Červené max
-
-
- Green min
- Zelené min
-
-
- Green max
- Zelené max
-
-
- Blue min
- Modré min
-
-
- Blue max
- Modré max
-
-
- Save current standard deviation value as default. This setting will be persistent between QGIS sessions.
- Uložit aktuální směrodatnou odchylku jako výchozí. Toto nastavení bude trvalé a nesmaže se restartem QGISu.
-
-
- Single band properties
- Jednoduché vlastnosti pásma
-
-
- Gray band
- Šedé pásmo
-
-
- Color map
- Paleta barev
-
-
- Invert color map
- Obrácená paleta barev
-
-
- Use standard deviation
- Použít standardní odchylku
-
-
- Load min / max values from band
- Načíst hodnoty min / max z pásma
-
-
- Estimate (faster)
- Odhad (rychlejší)
-
-
- Actual (slower)
- Skutečný (pomalejší)
-
-
- Current extent
- Aktuální rozsah
-
-
- Load
- Načíst
-
-
- Contrast enhancement
- Vylepšení kontrastu
-
-
- Current
- Aktuální
-
-
- Save current contrast enhancement algorithm as default. This setting will be persistent between QGIS sessions.
- Uložit aktuální algoritmus vylepšení kontrastu jako výchozí. Toto nastavení bude zachováno mezi QGIS sezeními.
-
-
- Saves current contrast enhancement algorithm as a default. This setting will be persistent between QGIS sessions.
- Uloží aktuální algoritmus vylepšení kontrastu jako výchozí. Toto nastavení bude zachováno mezi QGIS sezeními.
-
-
- Default
- Výchozí
-
-
- TextLabel
- TextLabel
-
-
- Title
- Nadpis
-
-
- Abstract
- Abstrakt
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
-<table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;">
-<tr>
-<td style="border: none;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'MS Shell Dlg 2'; font-size:8pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'MS Shell Dlg 2'; font-size:8pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:9pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:9pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></td></tr></table></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
-<table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;">
-<tr>
-<td style="border: none;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'MS Shell Dlg 2'; font-size:8pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'MS Shell Dlg 2'; font-size:8pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:9pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:9pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu';"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></td></tr></table></body></html>
-
-
- Save as image...
- Uložit jako obrázek...
+ Oversampling
+ Převzorkování
Průhlednost
- Note
- Poznámka
-
-
- Global transparency
- Všeobecná průhlednost
-
-
- No data value
- Hodnota "žádná data"
-
-
- Reset no data value
- Znovu nastavit hodnotu "žádná data"
-
-
- Custom transparency options
- Uživatelské nastavení průhlednosti
-
-
- Transparency band
- Pásmo průhlednosti
-
-
- Transparent pixel list
- Seznam pixelů průhlednosti
-
-
- Add values manually
- Zadat hodnoty ručně
+ Style
+ Styl
Layer info
Info o vrstvě
-
- displayed as
- zobrazena jako
-
-
- Layer name
- Název vrstvy
-
-
- Add values from display
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Description
@@ -56005,56 +43254,56 @@ p, li { white-space: pre-wrap; }
Keyword list
- Seznam klíčových slov
+
Format
- Formát
+
Attribution
-
Url
-
MetadataUrl
-
Type
- Typ
+
LegendUrl
-
image/png
- obrázek/png
image/jpeg
- obrázek/jpeg
image/jpg
- obrázek/jpg
Oddálený
- Oversampling
- Převzorkování
+ Global transparency
+ Všeobecná průhlednost
- Add Values from display
- Zadat hodnoty ze zobrazení
+ None
+ Žádná
+
+
+ 00%
+ 00%
+
+
+ <p align="right">Full</p>
+ <p align="right">Úplná</p>
+
+
+ No data value
+ Hodnota "žádná data"
+
+
+ Use original source no data value.
+ Použít no data hodnotu původního zdroje dat.
+
+
+ No data value:
+ Hodnota "žádná data":
+
+
+ Original data source no data value, if exists.
+ No data hodnota původního zdroje dat, pokud existuje.
+
+
+ <src no data value>
+ <src no data hodnota>
+
+
+ Additional user defined no data value.
+
+
+ Additional no data value
+
+
+ Custom transparency options
+ Uživatelské nastavení průhlednosti
+
+
+ Transparency band
+ Pásmo průhlednosti
+
+
+ Add values from display
+
+
+ Transparent pixel list
+ Seznam pixelů průhlednosti
+
+
+ Add values manually
+ Zadat hodnoty ručně
+
+
+ ...
+ ...
Export do souboru
- Reset to file defined null
- Obnovit na souborem definovaný null
+ General
+ Obecné
- Number of entries
- Počet vstupů
+ Layer name
+ Název vrstvy
+
+
+ displayed as
+ zobrazena jako
+
+
+ Layer source
+ Zdroj vrstvy
No Data
Žádná data
+
+ Scale dependent visibility
+ Viditelnost v závislosti na měřítku
+
+
+ Coordinate reference system
+ Souřadnicový referenční systém
+
Určit...
- Color interpolation
- Barevná interpolace
-
-
- Classification mode
- Mód klasifikace
-
-
- Scale dependent visibility
- Viditelnost v závislosti na měřítku
-
-
- Maximum
- Maximum
-
-
- Minimum
- Minimum
-
-
- Layer source
- Zdroj vrstvy
-
-
- Display name
- Zobrazit název
-
-
- Pyramid resolutions
- Rozlišení pyramid
-
-
- Resampling method
- Metoda převzorkování
-
-
- Build pyramids
- Sestavením pyramid
-
-
- Line graph
- Liniový graf
-
-
- Bar chart
- Sloupcový graf
-
-
- Column count
- Počet sloupců
-
-
- Out of range OK?
- Mimo rozsah, OK?
-
-
- Allow approximation
- Povolit aproximaci
-
-
- Restore Default Style
- Obnovit výchozí styl
-
-
- Save As Default
- Uložit jako výchozí
-
-
- Load Style ...
- Načíst styl ...
-
-
- Pipe
- Trubka
-
-
- Save Style ...
- Uložit styl ...
-
-
- Default R:1 G:2 B:3
- Výchozí R:1 G:2 B:3
-
-
- Add entry
- Přidat vstup
-
-
- Sort
- Seřadit
-
-
- Load color map from band
- Načíst paletu barev z pásma
-
-
- Load color map from file
- Načíst paletu barev ze souboru
-
-
- Export color map to file
- Exportovat paletu barev ze souboru
-
-
- Generate new color map
- Generovat novou barevnou paletu
-
-
- Coordinate reference system
- Souřadnicový referenční systém
+ Thumbnail
+ Miniatury
Paleta
- Notes
- Poznámky
+ Metadata
+ Metadata
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<table style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;">
-<tr>
-<td style="border: none;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></td></tr></table></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<table style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;">
-<tr>
-<td style="border: none;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></td></tr></table></body></html>
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
+
- Build pyramids internally if possible
- Vytvořit pyramidy vnitřně, pokud je to možné
+ Title
+ Nadpis
+
+
+ Abstract
+ Abstrakt
+
+
+ Pyramids
+ Pyramidy
+
+
+ Average
+ Průměr
+
+
+ Nearest Neighbour
+ Nejbližší soused
+
+
+ Build pyramids
+ Sestavením pyramid
+
+
+ Resampling method
+ Metoda převzorkování
+
+
+ Overview format
+ Formát náhledu
+
+
+ External
+ Externí
+
+
+ Internal (if possible)
+ Interní (pokud je to možné)
+
+
+ External (Erdas Imagine)
+ Externí (Erdas Imagine)
+
+
+ Histogram
+ Histogram
@@ -56429,14 +43719,6 @@ p, li { white-space: pre-wrap; }
Resolution (current: %1)
Rozlišení (aktuální: %1)
-
- map view
- zobrazení mapy
-
-
- Extent (current: %1)
- Rozsah (aktuální: %1)
-
Layer (%1, %2)
@@ -56468,7 +43750,7 @@ p, li { white-space: pre-wrap; }
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Write out 3 bands RGB image rendered using current layer style.
-
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
+
+ Create VRT
+ Vytvořit VRT
Extent
Rozsah
-
- West
- Západ
-
-
- East
- Východ
-
-
- North
- Sever
-
-
- South
- Jih
-
-
- Layer extent
- Rozsah vrstvy
-
-
- Map view extent
- Rozsah mapového okna
-
Resolution
@@ -56585,42 +43848,57 @@ datasets with maximum width and height specified below.
VRT Tiles
VRT soubory
-
- Create Options
- Možnosti vytvoření
-
Maximum number of columns in one tile.
- Maximální počet sloupců v jedné dlaždici.
Max columns
- Max sloupců
Maximum number of rows in one tile.
-
Max rows
- Max řádků
- Create VRT
- Vytvořit VRT
+ Create Options
+ Možnosti vytvoření
+
+
+ Pyramids
+ Pyramidy
+
+
+ Resolutions
+ Rozlišení
+
+
+ Pyramid resolutions corresponding to levels given
+ Rozlišení pyramid odpovídající zadaným úrovním
+
+
+ Use existing
+ Použít existující
Additional no data values. The specified values will be set to no data in output raster.
-
Load user defined fully transparent (100%) values
-
Clear all
Vyčistit vše
-
- Pyramids
- Pyramidy
-
-
- Resolutions
- Rozlišení
-
-
- Pyramid resolutions corresponding to levels given
- Rozlišení pyramid odpovídající zadaným úrovním
-
-
- Use existing
- Použít existující
-
QgsRasterMinMaxWidget
No option selected
- Žádná možnost nevybrána
Please select an option to load min/max values.
-
@@ -56773,16 +44031,6 @@ směrodatná odchylka ×
Form
Formulář
-
- Custom levels
- Vlastní úrovně
-
-
- Internal (if possible)
- Interní (pokud je to možné)
-
Insert positive integer values separated by spaces
@@ -56793,11 +44041,31 @@ směrodatná odchylka ×
External (GTiff .ovr)
Externí (GTiff .ovr)
+
+ Internal (if possible)
+ Interní (pokud je to možné)
+
External (Erdas Imagine .aux)
Externí (Erdas Imagine .aux)
+
+ Levels
+ Úrovně
+
+
+ Create Options
+ Možnosti vytvoření
+
+
+ Resampling method
+ Metoda převzorkování
+
Average
@@ -56808,26 +44076,16 @@ směrodatná odchylka ×
Nearest Neighbour
Nejbližší soused
+
+ Custom levels
+ Vlastní úrovně
+
Overview format
Formát náhledu
-
- Create Options
- Možnosti vytvoření
-
-
- Levels
- Úrovně
-
-
- Resampling method
- Metoda převzorkování
-
QgsRasterRenderer
@@ -56859,52 +44117,32 @@ směrodatná odchylka ×
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
- %1 z %3. {1 %2 ?}
-
-
- of
- z
+
QgsRasterTerrainAnalysisDialog
-
- Slope
- Sklon
-
-
- Aspect
- Aspekt
-
-
- Ruggedness index
- Index drsnosti
-
-
- Total curvature
- Celkové zakřivení
-
Export Frequency distribution as csv
@@ -56969,33 +44207,6 @@ směrodatná odchylka ×
QgsRasterTerrainAnalysisDialogBase
-
- Raster based terrain analysis
- Analýza terénu na základě rastru
-
-
- Analysis
- Analýza
-
-
- Input layer
- Vstupní vrstva
-
-
- Output layer
- Výstupní vrstva
-
-
- Output format
- Výstupní formát
-
-
- ...
- ...
-
Dialog
@@ -57006,6 +44217,21 @@ směrodatná odchylka ×
Elevation layer
Vrstva nadmořské výšky
+
+ Output layer
+ Výstupní vrstva
+
+
+ ...
+ ...
+
+
+ Output format
+ Výstupní formát
+
Z factor
@@ -57094,10 +44320,6 @@ směrodatná odchylka ×
QgsRasterTerrainAnalysisPlugin
-
- &Raster based terrain analysis...
- &Analýza terénu na základě rastru...
-
Terrain analysis
@@ -57171,25 +44393,13 @@ směrodatná odchylka ×
Calculating ruggedness...
Počítám nerovnost...
-
- Total curvature
- Celkové zakřivení
-
-
- Calculating
- Počítám
-
-
- Abort...
- Zrušit...
-
QgsRelReferenceConfigDlg
Preview Expression
-
@@ -57197,32 +44407,32 @@ směrodatná odchylka ×
Dialog
- Dialog
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -57230,19 +44440,19 @@ směrodatná odchylka ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -57250,49 +44460,45 @@ směrodatná odchylka ×
[Generated automatically]
-
QgsRelationAddDlgBase
-
- Dialog
- Dialog
-
Add relation
- Přidat vztah
+
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
-
Id
- Id
+
@@ -57300,43 +44506,43 @@ směrodatná odchylka ×
Form
- Formulář
+
Toggle editing
- Přepnout editaci
+
New
-
Delete
- Smazat
+
Link
-
Unlink
-
Form View
-
Table View
- Zobrazení tabulky
+
@@ -57344,47 +44550,47 @@ směrodatná odchylka ×
Dialog
- Dialog
+
Name
-
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
- Id
+
Add Relation
-
Remove Relation
-
@@ -57392,17 +44598,17 @@ směrodatná odchylka ×
Open Form
-
(no selection)
- (žádný výběr)
+
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -57443,18 +44649,6 @@ směrodatná odchylka ×
Scale range
Rozsah měřítka
-
- Min. scale
- Min. měřítko
-
-
- 1 :
- 1 :
-
-
- Max. scale
- Max. měřítko
-
Symbol
@@ -57476,38 +44670,11 @@ směrodatná odchylka ×
Evaluation error
Chyba hodnocení
-
- Filter is empty
- Filtr je prázdný
-
Filter returned %n feature(s)
number of filtered features
-
- Filtr vrátil %n prvek
- Filtr vrátil %n prvky
- Filtr vrátil %n prvků
-
-
-
-
- QgsRendererRulesTreeWidget
-
- (no filter)
- (žádný filtr)
-
-
- , scale
- , měřítko
-
-
- scale
- měřítko
-
-
- any scale
- jakékoliv měřítko
+ Filtr vrátil %n prvek Filtr vrátil %n prvky Filtr vrátil %n prvků
@@ -57544,7 +44711,7 @@ směrodatná odchylka ×
- expression -
-
- žádné pole -
-
- QgsRendererV2PropertiesDialog
-
- Symbology
- Symbolika
-
-
- Do you wish to use the original symbology implementation for this layer?
- Chcete použít původní symbologii pro tuto vrstvu?
-
-
QgsRendererV2PropsDialogBase
@@ -57575,38 +44731,22 @@ směrodatná odchylka ×
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
-
- Blending mode
- Režim míchání
-
-
- Renderer
- Vykreslovač
-
-
- Symbol levels
- Úrovně symbolů
-
-
- Old symbology
- Stará symbologie
+
Copy
- Kopírovat
+
Paste
- Vložit
+
Min. scale
Min. měřítko
-
- Max.scale
- Max. měřítko
-
Count
@@ -57747,7 +44883,7 @@ směrodatná odchylka ×
Max. scale
- Max. měřítko
+
QgsRuleBasedRendererV2Widget
-
- Form
- Formulář
-
-
- Rules
- Pravidla
-
-
- Label
- Popisek
-
-
- Rule
- Pravidlo
-
-
- Min. scale
- Min. měřítko
-
-
- Max. scale
- Max. měřítko
-
-
- Add
- Přidat
-
-
- Refine
- Zjemnit
-
-
- Rendering order...
- Pořadí vykreslování...
-
-
- Edit
- Upravit
-
-
- Remove
- Odebrat
-
Add rule
-
+
+ Edit rule
+
Remove rule
-
Spočítat prvky
- Rule grouping
- Seskupení pravidel
-
-
- No grouping
- Bez seskupení
-
-
- Group by filter
- Seskupovat podle filtru
-
-
- Group by scale
- Seskupovat podle měřítka
-
-
- Add scales
- Přidat měřítka
-
-
- Add categories
- Přidat kategorie
-
-
- Add ranges
- Přidat rozsahy
-
-
- Edit rule
- Upravit pravidlo
-
-
- Groups of rules cannot be edited.
- Skupiny pravidel nemohou být upraveny.
+ Rendering order...
+ Pořadí vykreslování...
Remove Rule
-
Refine current rule
-
QgsRunProcess
- Done
- Hotovo
+ <b>Starting %1...</b>
+ <b>Spouštím %1...</b>
Action
Akce
-
- <b>Starting %1...</b>
- <b>Spouštím %1...</b>
-
Unable to run command
@@ -57960,6 +45019,11 @@ směrodatná odchylka ×
Nemohu spustit příkaz
%1
+
+ Done
+ Hotovo
+
Unable to run command %1
@@ -58047,6 +45111,11 @@ směrodatná odchylka ×
QgsSLRootItem
+
+ New Connection...
+ Nové připojení...
+
Create database...
@@ -58057,15 +45126,6 @@ směrodatná odchylka ×
New SpatiaLite Database File
Nový soubor databáze SpatiaLite
-
- SpatiaLite (*.sqlite *.db )
- SpatiaLite (*.sqlite *.db )
-
-
- New Connection...
- Nové připojení...
-
SpatiaLite
@@ -58090,54 +45150,8 @@ směrodatná odchylka ×
-
- QgsSVGDiagramFactoryWidget
-
- Select svg file
- Vybrat svg soubor
-
-
- Select new preview directory
- Vybrat novou náhledovou složku
-
-
- Creating icon for file %1
- Vytvářím ikonu pro soubor %1
-
-
-
- QgsSVGDiagramFactoryWidgetBase
-
- Form
- Formulář
-
-
- Search directories
- Prohledat složky
-
-
- Add...
- Přidat...
-
-
- Remove
- Odebrat
-
-
- SVG Preview
- SVG náhled
-
-
- ...
- ...
-
-
QgsSVGFillSymbolLayerWidget
-
- Select svg texture file
- Vybrat SVG soubor textur
-
Texture width
@@ -58153,23 +45167,23 @@ směrodatná odchylka ×
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Select SVG texture file
- Vybrat SVG soubor textur
All files
- Všechny soubory
+ Všechny soubory
Save style in database
- Uložit styl do databáze
+
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
QgsSaveToDBDialog
-
- Add column
- Přidat sloupec
-
Save style
-
Description
- Popis
+
UI
-
Style Name
-
Use as default style for this layer
-
Open...
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
-
-
- QgsScaleBarPlugin
-
- metres/km
- metry/kilometry
-
-
- feet
- stopy
-
-
- degrees
- stupně
-
-
- km
- km
-
-
- mm
- mm
-
-
- cm
- cm
-
-
- m
- m
-
-
- foot
- stopy
-
-
- degree
- stupně
-
-
- unknown
- neznámé
-
-
- Top Left
- Vlevo nahoře
-
-
- Bottom Left
- Vlevo dole
-
-
- Top Right
- Vpravo nahoře
-
-
- Bottom Right
- Vpravo dole
-
-
- Tick Down
- Značky dole
-
-
- Tick Up
- Značky nahoře
-
-
- Bar
- Čára
-
-
- Box
- Rámeček
-
-
- &Decorations
- &Dekorace
-
-
- Creates a scale bar that is displayed on the map canvas
- Vytvoří měřítko a zobrazí jej v mapovém okně
-
-
- &Scale Bar
- &Měřítko
-
-
- feet/miles
- stopy/míle
-
-
- miles
- míle
-
-
- mile
- míle
-
-
- inches
- palce
-
-
-
- QgsScaleBarPluginGuiBase
-
- Scale Bar Plugin
- Zásuvný modul grafického měřítka
-
-
- Placement
- Umístění
-
-
- Top Left
- Vlevo nahoře
-
-
- Top Right
- Vpravo nahoře
-
-
- Bottom Left
- Vlevo dole
-
-
- Bottom Right
- Vpravo dole
-
-
- Scale bar style
- Styl grafického měřítka
-
-
- Color of bar
- Barva grafického měřítka
-
-
- Click to select the color
- Klikněte pro výběr barvy
-
-
- Size of bar
- Velikost grafického měřítka
-
-
- Tick Down
- Značky dole
-
-
- Tick Up
- Značky nahoře
-
-
- Box
- Rámeček
-
-
- Bar
- Čára
-
-
- Select the style of the scale bar
- Vybrat styl grafického měřítka
-
-
- Enable scale bar
- Zapnout grafické měřítko
-
-
- Automatically snap to round number on resize
- Při změně velikosti automaticky hodnotu zaokrouhlit
+
@@ -58447,29 +45283,29 @@ směrodatná odchylka ×
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -58477,32 +45313,11 @@ směrodatná odchylka ×
Scale visibility
-
QgsSearchQueryBuilder
-
- Search results
- Výsledek hledání
-
-
- Search string parsing error
- Chyba při kontrole hledaného řetězce
-
-
- No Records
- Žádné záznamy
-
-
- The query you specified results in zero records being returned.
- Výsledek specikovaného dotazu neobsahuje žádné položky.
-
Search query builder
@@ -58538,15 +45353,22 @@ směrodatná odchylka ×
Load query from xml file
Načíst dotaz z xml souboru
+
+ Search results
+ Výsledek hledání
+
Found %n matching feature(s).
test result
-
- Nalezen %n odpovídající prvek.
- Nalezeny %n odpovídající prvky.
- Nalezeno %n odpovídajících prvků.
-
+ Nalezen %n odpovídající prvek. Nalezeny %n odpovídající prvky. Nalezeno %n odpovídajících prvků.
+
+ Search string parsing error
+ Chyba při kontrole hledaného řetězce
Error during search
Chyba během hledání
+
+ No Records
+ Žádné záznamy
+
+
+ The query you specified results in zero records being returned.
+ Výsledek specikovaného dotazu neobsahuje žádné položky.
+
Save query to file
@@ -58606,10 +45438,6 @@ směrodatná odchylka ×
File is not a valid query document
Soubor není platný dokument dotazu
-
- Error creating search tree
- Chyba při vytváření vyhledávacího stromu
-
Select attribute
@@ -58632,11 +45460,7 @@ směrodatná odchylka ×
Validation finished (%n error(s) found).
number of geometry errors
-
- Ověření platnosti dokončeno (%n chyba nalezena).
- Ověření platnosti dokončeno (%n chyby nalezeny).
- Ověření platnosti dokončeno (%n chyb nalezeno).
-
+ Ověření platnosti dokončeno (%n chyba nalezena). Ověření platnosti dokončeno (%n chyby nalezeny). Ověření platnosti dokončeno (%n chyb nalezeno).
QgsShapeFile
-
- The database gave an error while executing this SQL:
- Při vykonávání tohoto SQL vrátila databáze chybu:
-
-
- ... (rest of SQL trimmed)
- is appended to a truncated SQL statement
- ... (zbytek SQL ožezáno)
-
Scanning
@@ -58702,6 +45515,17 @@ Chyba byla:
%2
+
+ The database gave an error while executing this SQL:
+ Při vykonávání tohoto SQL vrátila databáze chybu:
+
+
+ ... (rest of SQL trimmed)
+ is appended to a truncated SQL statement
+ ... (zbytek SQL ožezáno)
+
The error was:
@@ -58717,48 +45541,48 @@ Chyba byla:
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Color (start)
-
Color (end)
-
Blur radius
-
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -58767,13 +45591,13 @@ Chyba byla:
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Outline width
Šířka obrysu
-
- Size
- Velikost
-
Angle
@@ -58891,12 +45711,12 @@ Chyba byla:
Horizontal anchor point
-
Vertical anchor point
-
@@ -58939,10 +45759,6 @@ Chyba byla:
Form
Formulář
-
- Contrast enhancement
- Vylepšení kontrastu
-
Contrast
@@ -59018,14 +45834,10 @@ enhancement
Load Color Map
Načíst paletu barev
-
- The color map for band %1 failed to load
- Selhalo načtení barevné mapy pro kanál %1
-
The color map for band %1 has no entries
-
Barevná interpolace
- Add entry
- Přidat vstup
-
-
- Delete entry
- Odstranit vstup
-
-
- Sort
- Seřadit
-
-
- Load color map from band
- Načíst paletu barev z pásma
+ Add values manually
+ Zadat hodnoty ručně
...
...
-
- Add values manually
- Zadat hodnoty ručně
-
Remove selected row
@@ -59151,6 +45946,11 @@ enhancement
Sort colormap items
Spravovat položky barevných palet
+
+ Load color map from band
+ Načíst paletu barev z pásma
+
Load color map from file
@@ -59187,30 +45987,15 @@ enhancement
Generovat novou barevnou paletu
- Invert
- Invertovat
+ Mode
+ Režim
Classes
Třídy
-
- Min / Max origin
- Min / Max zdroje
-
-
- Min / max origin:
- Min / Max zdroje:
-
-
- Mode
- Režim
-
Min
@@ -59221,112 +46006,29 @@ enhancement
Max
Max
+
+ Invert
+ Invertovat
+
Classify
Klasifikovat
- Color ramp
- Barevný rozsah
-
-
-
- QgsSingleSymbolDialog
-
- Refresh markers
- Aktualizovat značky
+ Min / max origin:
+ Min / Max zdroje:
- None
- Žádná
-
-
- Texture
- Textura
-
-
- Open File
- Otevřít soubor
-
-
- Images
- Obrázky
-
-
- Images (*.png *.xpm *.jpg)
- Obrázky (*.png *.xpm *.jpg)
-
-
-
- QgsSingleSymbolDialogBase
-
- Single Symbol
- Jednoduchý symbol
-
-
- Size
- Velikost
-
-
- In map units
- V mapových jednotkách
-
-
- Drawing by field
- Vykreslování podle pole
-
-
- Rotation
- Rotace
-
-
- Area scale
- Měřítko oblasti
-
-
- Symbol
- Symbol
-
-
- Fill options
- Možnosti výplně
-
-
- Outline options
- Možnosti ohraničení
-
-
- Width
- Šířka
-
-
- ...
- ...
-
-
- Point Symbol
- Bodový symbol
-
-
- Label
- Popisek
+ Min / Max origin
+ Min / Max zdroje
QgsSingleSymbolRendererV2Widget
-
- Rotation field
- Pole rotace
-
-
- Size scale field
- Pole velikosti měřítka
-
-
- - no field -
- - žádné pole -
-
Symbol levels...
@@ -59338,32 +46040,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -59384,12 +46086,12 @@ enhancement
ALL the constraints
-
any ONE of the constraints
-
QgsSnappingDialog
-
- Snapping Options
- Možnosti přichytávání
-
Snapping and Digitizing Options
@@ -59476,11 +46174,6 @@ enhancement
Snapping options
Možnosti uchopování
-
- Enable topological editing
- Povolit topologickou editaci
-
Layer
@@ -59511,6 +46204,11 @@ enhancement
Avoid intersections of new polygons
Zabránit protínání nových polygonů
+
+ Enable topological editing
+ Povolit topologickou editaci
+
Enable snapping on intersection
@@ -59540,7 +46238,7 @@ enhancement
table info on %1 failed
-
QgsSpatiaLiteProvider
-
- Text
- Text
-
Binary object (BLOB)
Binární objekt (BLOB)
+
+ Text
+ Text
+
Decimal number (double)
@@ -59613,12 +46311,38 @@ enhancement
Retrieval of spatialite version failed
-
+
+ SpatiaLite
+ SpatiaLite
Could not parse spatialite version string '%1'
-
SQLite chyba: %2
SQL: %1
-
- SpatiaLite
- SpatiaLite
-
unknown cause
neznámá příčina
-
- SQLite error getting feature: %1
- SQLite chyba při získávání prvku: %1
-
FAILURE: Field %1 not found.
- SELHÁNÍ: Pole %1 nenalezeno.
+
@@ -59715,21 +46409,17 @@ SQL: %1
&Update statistics
-
&Add
&Přidat
-
- &Build Query
- &Vytvořit dotaz
-
&Set Filter
- &Nastavit filtr
+
Confirm Update Statistics
-
Update Statistics
- Aktualizovat statistiky
Internal statistics successfully updated for: %1
- Interní statistiky pro: %1 úspěšně aktualizovány
Error while updating internal statistics for: %1
- Při aktualizaci interních statistik pro: %1 došlo k chybě
+
+
+ @
+ @
+
+
+ Choose a SpatiaLite/SQLite DB to open
+ Vyberte SpatiaLite/SQLite DB k otevření
Error
- Chyba
+
Cannot add connection '%1' : a connection with the same name already exists.
-
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+ Opravdu chcete odstranit připojení %1 a k němu přiřazená nastavení?
+
+
+ Confirm Delete
+ Potvrdit smazání
+
+
+ Select Table
+ Vyberte tabulku
+
+
+ You must select a table in order to add a Layer.
+ Aby bylo možné přidat vrstvu, je třeba nejprve vybrat tabulku.
-
- SpatiaLite Error
- Chyba SpatiaLite
-
-
- Unexpected error when working with: %1
-
-%2
- Neočekávaná chyba během práce s: %1
-
-%2
-
-
- seems to be a valid SQLite DB, but not a SpatiaLite's one ...
- vypadá jako platná SQLite DB, ale není to SpatiaLite...
-
-
- unknown error cause
- neznámá příčina chyby
-
-
- @
- @
-
-
- Choose a SpatiaLite/SQLite DB to open
- Vyberte SpatiaLite/SQLite DB k otevření
-
-
- Confirm Delete
- Potvrdit smazání
-
-
- Select Table
- Vyberte tabulku
-
-
- You must select a table in order to add a Layer.
- Aby bylo možné přidat vrstvu, je třeba nejprve vybrat tabulku.
-
SpatiaLite getTableInfo Error
@@ -59904,48 +46577,18 @@ but implies better performance thereafter.
%2
- Are you sure you want to remove the %1 connection and all associated settings?
- Opravdu chcete odstranit připojení %1 a k němu přiřazená nastavení?
-
-
-
- QgsSpatiaLiteSourceSelectBase
-
- Add SpatiaLite Table(s)
- Přidat tabulky SpatiaLite
+ SpatiaLite Error
+ Chyba SpatiaLite
- SpatiaLite Databases
- Databáze SpatiaLite
-
-
- Delete
- Smazat
-
-
- New
- Nová
-
-
- Connect
- Připojit
-
-
- Search
- Hledat
-
-
- Search mode
- Režim hledání
-
-
- Search in columns
- Hledat ve sloupcích
-
-
- Search options...
- Volby hledání...
+ Unexpected error when working with: %1
+
+%2
+ Neočekávaná chyba během práce s: %1
+
+%2
@@ -60004,73 +46647,21 @@ but implies better performance thereafter.
QgsSpatialQueryDialog
- The spatial query requires at least two layers
- Prostorový dotaz vyžaduje aspoň dvě vrstvy
-
-
- Insufficient number of layers
- Nedostatečný počet vrstev
+ The spatial query requires at least two vector layers
+ Prostorový dotaz vyžaduje alespoň dvě vektorové vrstvy
%n selected geometries
selected geometries
-
- %n vybraná geometrie
- %n vybrané geometrie
- %n vybraných geometrií
-
+ %n vybraná geometrie %n vybrané geometrie %n vybraných geometrií
Selected geometries
Vybrané geometrie
-
- Total: %1
- Celkem: %1
-
-
- <<-- Begin at [%L1] --
- <<-- Začít na [%L1] --
-
-
- Query:
- Dotaz:
-
-
- < %1 >
- < %1 >
-
-
- Result: %1 features
- Výsledek: %1 prvků
-
-
- -- Finish at [%L1] (processing time %L2 minutes) -->>
- -- Dokončeno na [%L1] (čas zpracování %L2 minut) -->>
-
-
- %1 of %2
- %1 z %2
-
-
- all = %1
- vše = %1
-
-
- Total
- Souhrný
-
-
- The spatial query requires at least two vector layers
- Prostorový dotaz vyžaduje alespoň dvě vektorové vrstvy
-
%1)Query
@@ -60081,6 +46672,11 @@ but implies better performance thereafter.
Begin at %L1
Začít na %L1
+
+ < %1 >
+ < %1 >
+
Total of features = %1
@@ -60106,6 +46702,17 @@ but implies better performance thereafter.
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
Pardon! Povoleni jsou pouze tito poskytovatelé: OGR, POSTGRES and SPATIALITE.
+
+ %1 of %2
+ %1 z %2
+
+
+ all = %1
+ vše = %1
+
%1 of %2(selected features)
@@ -60230,10 +46837,6 @@ SRS mapy je %1.
%1 of %2 identified
%1 z %2 identifikováno
-
- DEBUG
- DEBUG
-
QgsSpatialQueryDialogBase
@@ -60247,10 +46850,6 @@ SRS mapy je %1.
Layer on which the topological operation will select geometries
Vrstva, na které bude topologická operace vybírat geometrie
-
- Target layer
- Cílová vrstva
-
Select source features from
@@ -60266,7 +46865,7 @@ SRS mapy je %1.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -60285,6 +46884,11 @@ p, li { white-space: pre-wrap; }
Where the feature
Kde prvek
+
+ Select the topological operation
+ Vyberte topologickou operaci
+
Layer whose geometries will be used as reference by the topological operation
@@ -60295,6 +46899,24 @@ p, li { white-space: pre-wrap; }
Reference features of
Referenční prvky z
+
+ Select the reference layer
+ Vyberte referenční vrstvu
+
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">Kdy je zaškrtnuto, operace bude brát v úvahu pouze vybrané prvky referenční vrstvy</span></p></body></html>
+
And use the result to
@@ -60316,6 +46938,11 @@ p, li { white-space: pre-wrap; }
Create layer with selected
Vytvořit vrstvu s vybranými
+
+ Result feature ID's
+ ID výsledných prvků
+
Select one FID to identify geometry of feature
@@ -60331,80 +46958,20 @@ p, li { white-space: pre-wrap; }
Zoom to item
Přiblížit na položku
-
- Log messages
- Zapisovat zprávy
-
-
- Reference layer
- Referenční vrstva
-
-
- Select the reference layer
- Vyberte referenční vrstvu
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">Kdy je zaškrtnuto, operace bude brát v úvahu pouze vybrané prvky referenční vrstvy</span></p></body></html>
-
-
- Result feature ID's
- ID výsledných prvků
-
-
- Run query or close the window
- Spusťte dotaz nebo zavřete okno
-
-
- Topological operations between layers of target and reference
- Topologické operace mezi cílovou a referenční vrstvou
-
-
- Topological operation
- Topologická operace
-
-
- Select the topological operation
- Vyberte topologickou operaci
-
-
- Results (click to highlight on map)
- Výsledky (klikněšte pro zvýraznění na mapě)
-
-
- Select item to identify geometry of feature
- Vyberte položku pro identifikaci geometrie prvku
-
Check to show log processing of query
Zaškrtněte pro zobrazení záznamů zpracování dotazu
- Show log messages
- Zobrazit záznamy (logy)
+ Log messages
+ Zapisovat zprávy
- Total of features from query
- Celkový počet prvků z dotazu
-
-
- Total
- Celkem
+ Run query or close the window
+ Spusťte dotaz nebo zavřete okno
@@ -60427,25 +46994,6 @@ p, li { white-space: pre-wrap; }
DEBUG
-
- QgsSpatialiteSridsDialog
-
- SpatiaLite Database
- SpatiaLite Databáze
-
-
- Unable to open the database
- Nemohu otevřít databázi
-
-
- Error
- Chyba
-
-
- Failed to load SRIDS: %1
- Selhalo načtení SRIDS: %1
-
-
QgsSpatialiteSridsDialogBase
@@ -60487,14 +47035,55 @@ p, li { white-space: pre-wrap; }
QgsSpit
+
+ File Name
+ Jméno souboru
+
+
+ Feature Class
+ Třída objektu
+
+
+ Features
+ Objekty
+
+
+ DB Relation Name
+ DB Relation Name
+
+
+ Schema
+ Schéma
+
+
+ Are you sure you want to remove the [%1] connection and all associated settings?
+ Opravdu chcete odstranit připojení [%1] a k němu přiřazená nastavení?
+
Confirm Delete
Potvrdit smazání
- Shapefiles (*.shp);;All files (*)
- Shapefile (*.shp);;Všechny soubory (*)
+ Add Shapefiles
+ Vložit shapefily
+
+
+ Shapefiles
+ Shapefile
+
+
+ All files
+ Všechny soubory
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
[Použít výchozí (název sloupce s geometrií)] - nastavit název sloupce na 'the_geom'
+
+ [Global Schema] - set the schema for all files to be imported into
+ [Globální schéma] - nastavit schéma pro všechny importované soubory
+
[Import] - import the current shapefiles in the list
@@ -60633,11 +47227,31 @@ p, li { white-space: pre-wrap; }
You need to specify a Connection first
Je potřeba nejprve specifikovat spojení
+
+ Password for %1
+ Heslo pro %1
+
+
+ Please enter your password:
+ Prosím vložte vaše heslo:
+
Connection failed - Check settings and try again
Spojení selhalo - Zkontrolujte nastavení a zkuste znovu
+
+ PostGIS not available
+ PostGIS není dostupný
+
+
+ <p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
+ <p>Zvolená databáze nemá nainstalovaný PostGIS, který je vyžadován pro uchování prostorových dat.</p>
+
You need to add shapefiles to the list first
@@ -60663,86 +47277,6 @@ p, li { white-space: pre-wrap; }
Problem inserting features from file:
Problém při přidání prvků ze souboru:
-
- Import Shapefiles - Relation Exists
- Import ShepeFiles - relace existuje
-
-
- File Name
- Jméno souboru
-
-
- Feature Class
- Třída objektu
-
-
- Features
- Objekty
-
-
- DB Relation Name
- DB Relation Name
-
-
- Schema
- Schéma
-
-
- Add Shapefiles
- Vložit shapefily
-
-
- PostGIS not available
- PostGIS není dostupný
-
-
- <p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
- <p>Zvolená databáze nemá nainstalovaný PostGIS, který je vyžadován pro uchování prostorových dat.</p>
-
-
- %1 of %2 shapefiles could not be imported.
- %1 z %2 shapefilů nelze importovat.
-
-
- Please enter your password:
- Prosím vložte vaše heslo:
-
-
- Are you sure you want to remove the [%1] connection and all associated settings?
- Opravdu chcete odstranit připojení [%1] a k němu přiřazená nastavení?
-
-
- Shapefiles
- Shapefile
-
-
- All files
- Všechny soubory
-
-
- [Global Schema] - set the schema for all files to be imported into
- [Globální schéma] - nastavit schéma pro všechny importované soubory
-
-
- Password for %1
- Heslo pro %1
-
%1
@@ -60788,6 +47322,11 @@ Naásledující pole jsou duplicitní:
%1
<p>Chyba během spouštění SQL:</p><p>%2</p><p>Databáze řekla:%3</p>
+
+ Import Shapefiles - Relation Exists
+ Import ShepeFiles - relace existuje
+
The Shapefile:
@@ -60807,6 +47346,11 @@ pro tento Shapefile v hlavním dialogu seznamu souborů.
Chcete přepsat vztah [%2] ?
+
+ %1 of %2 shapefiles could not be imported.
+ %1 z %2 shapefilů nelze importovat.
+
QgsSpitBase
@@ -60815,6 +47359,50 @@ Chcete přepsat vztah [%2] ?
SPIT - Shapefile to PostGIS Import Tool
SPIT - Nástroj na import souboru Shapefile do PostGIS
+
+ PostgreSQL connections
+ PostgreSQL připojení
+
+
+ Connect to PostGIS
+ Připojit k PostGIS
+
+
+ Connect
+ Připojit
+
+
+ Create a new PostGIS connection
+ Vytvořit spojení PostGIS
+
+
+ New
+ Nové
+
+
+ Edit the current PostGIS connection
+ Editova toto spojení PostGIS
+
+
+ Edit
+ Upravit
+
+
+ Remove the current PostGIS connection
+ Odebrat současné spojení PostGIS
+
Odebrat
- SRID
- SRID
-
-
- Remove All
- Odebrat vše
-
-
- Add
- Přidat
-
-
- Add a shapefile to the list of files to be imported
- Přidat soubor Shapefile do seznamu importovaných souborů
-
-
- PostgreSQL connections
- PostgreSQL připojení
+ Import options and shapefile list
+ Importovat nastavení a seznam shapefilů
Geometry column name
Název sloupce s geometrií
+
+ Set the geometry column name to the default value
+ Nastavit název sloupce s geomerií na výchozí hodnotu
+
Use default geometry column name
Použít výchozí název sloupce s geometrií
+
+ SRID
+ SRID
+
+
+ Set the SRID to the default value
+ Nastavit SRID na obvyklou hodnotu
+
Use default SRID
@@ -60872,6 +47456,17 @@ Chcete přepsat vztah [%2] ?
Global schema
Globální schéma
+
+ Add a shapefile to the list of files to be imported
+ Přidat soubor Shapefile do seznamu importovaných souborů
+
+
+ Add
+ Přidat
+
Odebrat všechny soubory Shapefile ze seznamu souborů určených pro import
- Set the SRID to the default value
- Nastavit SRID na obvyklou hodnotu
-
-
- Set the geometry column name to the default value
- Nastavit název sloupce s geomerií na výchozí hodnotu
-
-
- New
- Nové
-
-
- Create a new PostGIS connection
- Vytvořit spojení PostGIS
-
-
- Remove the current PostGIS connection
- Odebrat současné spojení PostGIS
-
-
- Connect
- Připojit
-
-
- Edit
- Upravit
-
-
- Edit the current PostGIS connection
- Editova toto spojení PostGIS
-
-
- Import options and shapefile list
- Importovat nastavení a seznam shapefilů
-
-
- Connect to PostGIS
- Připojit k PostGIS
+ Remove All
+ Odebrat vše
@@ -60977,8 +47521,8 @@ Chcete přepsat vztah [%2] ?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -60992,228 +47536,156 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? Quantum GIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of Quantum GIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-size:10pt;"> for more details. In the list below you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:14pt; font-weight:600;">2011 Sponsors</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">SILVER SPONSORS</span></p>
-<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.vorarlberg.at"><span style=" font-family:'Courier New,courier'; font-size:10pt; text-decoration: underline; color:#0000ff;">State of Vorarlberg</span></a><span style=" font-family:'Courier New,courier'; font-size:10pt;"> </span><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">, Austria (11.2011)</span></p>
-<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.agi.so.ch"><span style=" font-family:'Courier New,courier'; font-size:10pt; text-decoration: underline; color:#0000ff;">Kanton Solothurn</span></a><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">, Switzerland (4.2011)</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'MS Shell Dlg 2'; font-size:8pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">BRONZE SPONSORS</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://gis.uster.ch/"><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; text-decoration: underline; color:#0000ff;">City of Uster</span></a><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#0000ff;"> </span><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#000000;">, Switzerland</span><span style=" font-family:'Helvetica,Arial,sans-serif'; color:#000000;"> (11.2011)</span></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.municipia.pt"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">Municípia, SA</span></a></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:14pt; font-weight:600;">2010 Sponsors</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">BRONZE SPONSORS</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.gfosservices.com"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">Studio Associato Gfosservices</span></a></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://nextgis.org"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">NEXTGIS</span></a></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:14pt; font-weight:600;"></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu';">Tvrdě pracujeme abychom pro vás vytvořili tento hezký software pro vás. Viděli jste ty super funkce, které nabízí? Máte takový příjemný pocit, když ho používáte? Quantum GIS je výsledek lásky oddaného týmu vývojářů. Chceme, abyste tento software kopírovali & sdíleli a poskytli ho do rukou tolika lidem, kolika můžete. Pokud vám QGIS šetří práci a peníze, nebo máte rádi naši práci a máte finanční možnosti nám pomoci, zvyžte prosím možnost sponzorování vývoje Quantum GISu. Používáme peníze od sponzorů k zaplacení nákladů na naše hackfesty každé 2 roky a na celkovou podporu cílů našeho projektu. Podívejte se prosím na </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu';"> pro více detailů. V seznamu níže uvidíte ty super lidi a společnosti, které nám finančně pomáhají - obrovské díky vám všem!</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:14pt; font-weight:600;">2011 Sponzoři</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">STŘÍBRNÍ SPONZOŘI</span></p>
-<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.vorarlberg.at"><span style=" font-family:'Courier New,courier'; font-size:10pt; text-decoration: underline; color:#0000ff;">Stát Vorarlberg</span></a><span style=" font-family:'Courier New,courier'; font-size:10pt;"> </span><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">, Rakousko (11.2011)</span></p>
-<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.agi.so.ch"><span style=" font-family:'Courier New,courier'; font-size:10pt; text-decoration: underline; color:#0000ff;">Kanton Solothurn</span></a><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">, Švýcarsko (4.2011)</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'MS Shell Dlg 2'; font-size:8pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">BRONZOVÍ SPONZOŘI</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://gis.uster.ch/"><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; text-decoration: underline; color:#0000ff;">Město Uster</span></a><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#0000ff;"> </span><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#000000;">, Švýcarsko</span><span style=" font-family:'Helvetica,Arial,sans-serif'; color:#000000;"> (11.2011)</span></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.municipia.pt"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">Municípia, SA</span></a></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:14pt; font-weight:600;">2010 Sponzoři</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">BRONZOVÍ SPONZOŘI</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.gfosservices.com"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">Studio Associato Gfosservices</span></a></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://nextgis.org"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">NEXTGIS</span></a></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:14pt; font-weight:600;"></p></body></html>
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu';">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? Quantum GIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of Quantum GIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu';"> for more details. In the list below you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu';"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:14pt; font-weight:600;">2011 Sponsors</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-weight:600;">BRONZE SPONSORS</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.municipia.pt"><span style=" text-decoration: underline; color:#0000ff;">Municípia, SA</span></a></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu';"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:14pt; font-weight:600;">2010 Sponsors</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-weight:600;">BRONZE SPONSORS</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.gfosservices.com"><span style=" text-decoration: underline; color:#0000ff;">Studio Associato Gfosservices</span></a></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://nextgis.org"><span style=" text-decoration: underline; color:#0000ff;">NEXTGIS</span></a></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:14pt; font-weight:600;"></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu';">Tvrdě pracujeme abychom pro vás vytvořili tento hezký software pro vás. Viděli jste ty super funkce, které nabízí? Máte takový příjemný pocit, když ho používáte? Quantum GIS je výsledek lásky oddaného týmu vývojářů. Chceme, abyste tento software kopírovali & sdíleli a poskytli ho do rukou tolika lidem, kolika můžete. Pokud vám QGIS šetří práci a peníze, nebo máte rádi naši práci a máte finanční možnosti nám pomoci, zvyžte prosím možnost sponzorování vývoje Quantum GISu. Používáme peníze od sponzorů k zaplacení nákladů na naše hackfesty každé 2 roky a na celkovou podporu cílů našeho projektu. Podívejte se prosím na </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu';"> pro více detailů. V seznamu níže uvidíte ty super lidi a společnosti, které nám finančně pomáhají - obrovské díky vám všem!</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu';"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:14pt; font-weight:600;">2011 Sponzoři</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-weight:600;">BRONZOVÍ SPONZOŘI</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.municipia.pt"><span style=" text-decoration: underline; color:#0000ff;">Municípia, SA</span></a></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu';"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:14pt; font-weight:600;">2010 Sponzoři</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-weight:600;">BRONZOVÍ SPONZOŘI</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.gfosservices.com"><span style=" text-decoration: underline; color:#0000ff;">Studio Associato Gfosservices</span></a></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://nextgis.org"><span style=" text-decoration: underline; color:#0000ff;">NEXTGIS</span></a></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:14pt; font-weight:600;"></p></body></html>
+
QgsSqlAnywhereProvider
+ Failed to load interface
- Selhalo načtení rozhraní
+ Selhalo načtení rozhraní
+ Failed to connect to database
- Selhalo připojení k databázi
+ Selhalo připojení k databázi
+ A connection to the SQL Anywhere database cannot be established.
- Připojení k SQL Kdekoliv databázi nemohlo být vytvořeno.
+ Připojení k SQL Kdekoliv databázi nemohlo být vytvořeno.
+ No suitable key column
- Žádný vhodný sloupec klíče
+ Žádný vhodný sloupec klíče
+ The source relation %1 has no column suitable for use as a unique key.
-Quantum GIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- Zdrojový vztah %1 nemá sloupec vhodný pro použití jako unikátní klíč.
-
-Quantum GIS vyžaduje, aby vztah měl sloupec typu celé číslo ne větší než 32 bitů, obsahující unikátní hodnoty.
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+ Error loading attributes
- Chyba při načítání atributů
+ Chyba při načítání atributů
+ Ambiguous field!
- Nejasné pole!
+ Nejasné pole!
+ Duplicate field %1 found
- Nalezeno duplicitní pole %1
+ Nalezeno duplicitní pole %1
- Error describing bind parameters
- Chyba při popisu vázacích parametrů
-
-
- Error binding parameters
- Chyba vázacích parametrů
-
-
+ Read attempt on an invalid SqlAnywhere data source
- Pokus o čtení na neplatném datovém zdroji SqlAnywhere
+ Pokus o čtení na neplatném datovém zdroji SqlAnywhere
+ SQLAnywhere
- SQLkdekoliv
+ SQLkdekoliv
+ Error inserting features
- Chyba při vkládání prvků
+ Chyba při vkládání prvků
+ Error deleting features
- Chyba při mazání prvků
+ Chyba při mazání prvků
+ Error adding attributes
- Chyba při přidávání atributů
+ Chyba při přidávání atributů
+ Error deleting attributes
- Chyba při mazání atributů
+ Chyba při mazání atributů
+ Attribute not found
- Atribut nenalezen
+ Atribut nenalezen
+ Error updating attributes
- Chyba při aktualizaci atributů
+ Chyba při aktualizaci atributů
+ Error updating features
- Chyba při aktualizaci prvků
+ Chyba při aktualizaci prvků
+ Error verifying geometry column %1
- Chyba při ověřování sloupce geometrie %1
+ Chyba při ověřování sloupce geometrie %1
+ Unknown geometry type
- Neznámý typ geometrie
+ Neznámý typ geometrie
- Column %1 has a geometry type of %2, which Quantum GIS does not currently support.
- Sloupec %1 má typ geometrie %2, který Quantum GIS zatím nepodporuje.
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
- Smíšené prostorové referenční systémy
-
-
- Column %1 is not restricted to a single SRID, which Quantum GIS requires.
- Sloupec %1 není omezen na jedno SRID, což Quantum GIS vyžaduje.
+ Smíšené prostorové referenční systémy
+ Error checking database ReadOnly property
- Chyba kontroly vlastnosti databáze ReadOnly
+ Chyba kontroly vlastnosti databáze ReadOnly
+ Error loading SRS definition
- Chyba načítání SRS definice
-
-
- Because Quantum GIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Protože Quantum GIS podporuje pouze planární data, poskytovatel dat SQL Kdekoliv transformuje data na kompatibilní planární projekci (SRID=%1).
-
-
- Because Quantum GIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Protože Quantum GIS podporuje pouze planární data a nebyla nalezena kompatibilní planární projekce, poskytovatel dat SQL Kdekoliv se pokusí transformovat data na planární projekci WGS 84 (SRID=%1).
+ Chyba načítání SRS definice
+ Limited Support of Round Earth SRS
- Omezená podpora SRS kulaté Země
+ Omezená podpora SRS kulaté Země
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- Sloupec %1 (%2) obsahuje geometrie patřící prostorovému referenčnímu systému kulaté Země (SRID=%3). %4
+ Sloupec %1 (%2) obsahuje geometrie patřící prostorovému referenčnímu systému kulaté Země (SRID=%3). %4
Aktualizace hodnot geometrie budou zakázány a výkon dotazů bude malý, protože nebudou využity prostorové indexy. Pro zlepšení výkonu zvažte vytvotření prostorového indexu v novém (možno vypočteném) sloupci obsahujícím plnární projekci těchto geometrií. Pro nápovědu a pomoc se odkazujte na ST_SRID(INT) a ST_Transform(INT) metody v dokumentaci SQL Kdekoliv.
@@ -61238,12 +47710,12 @@ Aktualizace hodnot geometrie budou zakázány a výkon dotazů bude malý, proto
file specified below
-
URL specified below
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Symbol nazvaný '%1' už existuje.
Přepsat?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Barevný rozsah nazvaný '%1' už existuje.
Přepsat?
@@ -61416,6 +47888,42 @@ Přepsat?
QgsStyleV2ManagerDialog
+
+ Type here to filter symbols...
+
+
+ Share Menu
+ Menu sdílení
+
+
+ Export
+ Export
+
+
+ Import
+ Import
+
+
+ Group Actions
+ Akce skupin
+
+
+ Group Symbols
+ Symboly skupin
+
+
+ Edit Smart Group
+ Upravit chytrou skupinu
+
Marker symbol (%1)
@@ -61436,30 +47944,6 @@ Přepsat?
Color ramp (%1)
Barevný rozsah (%1)
-
- Symbol name
- Název symbolu
-
-
- Please enter name for new symbol:
- Zadejte prosím název nového symbolu:
-
-
- new symbol
- nový symbol
-
-
- Save symbol
- Uložit symbol
-
-
- Symbol with name '%1' already exists. Overwrite?
- Symbol nazvaný '%1' již existuje. Přepsat?
-
Gradient
Přechod
-
- Type here to filter symbols ...
- Pište zde pro filtrování symbolů ...
-
-
- Type here to filter symbols...
-
-
- Share Menu
-
-
- Export
- Export
-
-
- Import
- Import
-
-
- Group Actions
-
-
- Group Symbols
-
-
- Edit Smart Group
-
cpt-city
cpt-city
+
+ new symbol
+ nový symbol
+
new marker
@@ -61553,11 +48002,22 @@ Přepsat?
Please enter a name for new symbol:
Zadejte prosím název nového symbolu:
+
+ Save symbol
+ Uložit symbol
+
Cannot save symbol without name. Enter a name.
Nemohu vytvořit symbol bez názvu. Zadejte název.
+
+ Symbol with name '%1' already exists. Overwrite?
+ Symbol nazvaný '%1' již existuje. Přepsat?
+
Color ramp type
@@ -61616,22 +48076,22 @@ Přepsat?
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
- Nová skupina
+ Nová skupina
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
- Dokončit seskupení
There was a problem with the Symbols database while regrouping.
-
Edit Group
- Upravit skupinu
Add Group
- Přidat skupinu
Remove Group
- Odstranit skupinu
Apply Group
- Použít skupinu
Un-group
- Zrušit seskupení
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
There was some error while editing the smart group.
-
-
- Color ramp name
- Název barevného rozsahu
-
-
- Please enter name for new color ramp:
- Zadejte prosím název pro nový barevný rozsah:
-
-
- new color ramp
- nový barevný rozsah
-
-
- Load styles
- Načíst styly
-
-
- XML files (*.xml *XML)
- XML soubory (*.xml *.XML)
+
@@ -61771,10 +48211,6 @@ There was a problem with your symbol database.
Style Manager
Správce stylů
-
- Style item type
- Typ položky stylu
-
Marker
@@ -61805,15 +48241,6 @@ There was a problem with your symbol database.
Add item
Přidat položku
-
- Share
- Sdílet
-
-
- Add
- Přidat
-
Edit item
@@ -61830,16 +48257,9 @@ There was a problem with your symbol database.
Odstranit položku
- Remove
- Odebrat
-
-
- Export...
- Export...
-
-
- Import...
- Import...
+ Share
+ Sdílet
@@ -61959,21 +48379,35 @@ There was a problem with your symbol database.
SVG export options
- Možnosti SVG exportu
Export map layers as svg groups (may affect label placement)
- Exportovat mapové vrstvy jako SVG skupiny (může postihnout umístění popisků)
Render text as outline
- Vykreslit text jako obrys
QgsSvgMarkerSymbolLayerV2Widget
+
+ Millimeter
+
+
+ Map unit
+
Select SVG file
@@ -61984,24 +48418,6 @@ There was a problem with your symbol database.
SVG files
SVG soubory
-
- Size
- Velikost
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
Border width
@@ -62035,12 +48451,12 @@ There was a problem with your symbol database.
Horizontal anchor point
- Vodorovné kotvící body
Vertical anchor point
- Svislé kotvící body
@@ -62073,39 +48489,23 @@ There was a problem with your symbol database.
File not found
Soubor nenalezen
-
- Invalid file
- Neplatný soubor
-
-
- Error, file does not exist or is not readable
- Chyba soubor je buď nečitelný nebo neexistuje
-
-
- Invalid file url
- Neplatné URL souboru
-
-
- Error, file URL is invalid
- Chyba, URL souboru je neplatné
-
QgsSymbolLayerV2Widget
Size
- Velikost
+ Velikost
area
- plocha
+ plocha
diameter
- průměr
@@ -62134,55 +48534,32 @@ There was a problem with your symbol database.
Definuje pořadí, ve kterém jsou vrstvy symbolů vykresleny. Čísla v buňkách definují,ve které vykreslovací fázi bude vrstva vykreslena.
-
- QgsSymbolV2PropertiesDialog
-
- Outline: %1
- Obrys: %1
-
-
QgsSymbolV2SelectorDialog
Symbol name
- Název symbolu
+ Název symbolu
Please enter name for the symbol:
- Zadejte prosím název pro symbol:
+ Zadejte prosím název pro symbol:
New symbol
- Nový symbol
+ Nový symbol
Save symbol
- Uložit symbol
+
Symbol with name '%1' already exists. Overwrite?
- Symbol nazvaný '%1' již existuje. Přepsat?
-
-
- Transparency %1%
- Průhlednost %1%
-
-
- Transparency: %1%
- Průhlednost: %1%
-
-
- Invalid Selection!
- Neplatný výběr!
-
-
- Kindly select a symbol to add layer.
- Vyberte prosím symbol pro přidání vcrstvy.
+
@@ -62192,10 +48569,6 @@ There was a problem with your symbol database.
Symbol selector
Výběr symbolu
-
- Symbol layers
- Vrstvy symbolů
-
Add symbol layer
@@ -62224,105 +48597,25 @@ There was a problem with your symbol database.
Save symbol
- Uložit symbol
+
Save
- Uložit
-
-
- Change...
- Změnit...
-
-
- Unit
- Jednotka
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
-
- Opacity
- Průhlednost
-
-
- Color
- Barva
-
-
- Change
- Změnit
-
-
- Size
- Velikost
-
-
- Rotation
- Rotace
-
-
- °
- °
-
-
- Width
- Šířka
-
-
- Save as style
- Uložit jako styl
-
-
- Saved styles
- Uložit styly
-
-
- Symbol Name
- Název symbolu
-
-
- Properties
- Vlastnosti
-
-
- Advanced
- Pokročilé
-
-
- Add to style
- Přidat do stylu
-
-
- Symbols from style
- Symboly ze stylu
-
-
- Style manager...
- Správce stylů...
+
QgsSymbolsListWidget
-
- Style Manager
- Správce stylů
-
Millimeter
- Milimetr
+
Map unit
- Mapová jednotka
+
Select font color
Vybrat barvu písma
-
- Select background color
- Vybrat barvu pozadí
-
QgsTextAnnotationDialogBase
@@ -62436,27 +48725,23 @@ There was a problem with your symbol database.
I
I
-
- Background color
- Barva pozadí
-
QgsTextEditConfigDlg
Form
- Formulář
+
Multiline
- Multilinie
+
HTML
- HTML
+
@@ -62474,62 +48759,31 @@ There was a problem with your symbol database.
QgsTipFactory
-
- Quantum GIS is open source
- Quantum GIS je open source
-
-
- Quantum GIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available to the Quantum GIS project, and that you can not create a new version of Quantum GIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
- Quantum GIS je open source software. To znamená, že softwarový kód může být bezplatně a svobodně prohlížen a upravován. GPL licence toto omezuje jen tak, že veškeré úpravy musíte zveřejnit pro Quantum GIS projekt a že nesmíte vydat novou verzi Quantum GISu pod uzavřenou licencí. Navštivte <a href="http://qgis.org"> domovskou stránku QGISu (http://qgis.org)</a> pro více informací.
-
QGIS Publications
QGIS publikace
- If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the Quantum GIS home page (http://http://qgis.org/en/site/about/case_studies/index.html).
- Pokud napíšete vědeckou publikaci nebo jiný článek odkazující na QGIS, velmi by nás potěšilo, kdybyste mohli zahrnout vaši práci v <a href="http://qgis.org/en/site/about/case_studies/index.html">sekci případových studií</a> domovské stránky Quantum GISu (http://http://qgis.org/en/site/about/case_studies/index.html).
+ If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
+ Pokud napíšete vědeckou publikaci nebo jiný článek odkazující na QGIS, velmi by nás potěšilo, kdybyste mohli zahrnout vaši práci v <a href="http://qgis.org/en/site/about/case_studies/index.html">sekci případových studií</a> domovské stránky Quantum GISu.
Become an QGIS translator
Staňte se překladatelem QGISu
-
- Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page (http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui).</a>
- chtěli byste mítQGIS ve vašem mateřském jazyce? Hledáme překladatele a uvítáme vaši pomoc! Proces překladu není složitý - instrukce jsou k dispozici na QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">překladatelské stránce (http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui).</a>
-
QGIS Mailing lists
Emailové konference QGISu
-
- If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating the the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page (http://qgis.org/en/site/forusers/support.html#mailing-lists).
- Pokud potřebujete pomoci s QGISem, pak máme uživatelskou ("users") emailovou konferenci, kde si uživatelé navzájem pomáhají s problémy spojenými s naším softwarem. Také máme konferenci pro vývojáře ("developers") pro ty, co chtějí pomoct a diskutovat věci spojené s programováním QGISu. Detaily o tom, jak se přihlásit jsou v <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> na domovské stránce QGISu (http://qgis.org/en/site/forusers/support.html#mailing-lists).
-
-
- Quantum GIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of Quantum GIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
- Quantum GIS je open source software. To znamená, že softwarový kód může být bezplatně a svobodně prohlížen a upravován. GPL licence toto omezuje jen tak, že veškeré úpravy musíte zveřejnit ve formě zdrojového kódu komukoliv, komu dáte k dispozici pozměněnou verzi a že nemůžete vytvořit novou verzi Quantum GISu s uzavřenou licencí. Navštivte <a href="http://qgis.org"> domovskou stránku QGISu (http://qgis.org)</a> pro více informací.
-
-
- If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page (http://qgis.org/en/site/forusers/support.html#mailing-lists).
- Pokud potřebujete pomoci s QGISem, pak máme uživatelskou ("users") emailovou konferenci, kde si uživatelé navzájem pomáhají s problémy spojenými s naším softwarem. Také máme konferenci pro vývojáře ("developers") pro ty, co chtějí pomoct a diskutovat věci spojené s programováním QGISu. Detaily o tom, jak se přihlásit jsou v <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> na domovské stránce QGISu (http://qgis.org/en/site/forusers/support.html#mailing-lists).
-
Is it 'QGIS' or 'Quantum GIS'?
Je to 'QGIS' nebo 'Quantum GIS'?
-
- Both are correct. For articles we suggest you write 'Quantum GIS (QGIS) is ....' and then refer to it as QGIS thereafter.
- Obojí je správně. V článcích ale doporučujeme psát 'Quantum GIS (QGIS) je ....' a pak se už na něj odkazovat jen jako na QGIS.
-
-
- How do I refer to Quantum GIS?
- Jak se mám odkazovat na Quantum GIS?
-
QGIS is open source
@@ -62560,33 +48814,15 @@ There was a problem with your symbol database.
Add the current date to a map layout
Přidat aktuální datum do návrhu mapy
-
- In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
-
- In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
-
- Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
-
- You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://doc.qt.nokia.com/latest/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
- Můžete přidat proměnnou aktuálního data do vašeho návrhu mapy. Vytvořte klasický textový popisek a přidejte řetězec $CURRENT_DATE(yyyy-MM-dd) do textového okna. Podívejte se na <a href="http://doc.qt.nokia.com/latest/qdate.html#toString">QDate::toString format documentation</a> pro možné formáty data.
-
Moving Elements and Maps in the Print Composer
Přesun prvků a map v Tvůrci map
- In the print composer tool bar you can find two buttons for moving elements. The left one (a selection cursor with the hand symbol) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> dialogue, which can be found in the tab <strong>Item → General Options → Position and Size</strong>. For easier positioning you can also set specific anchor points of the element within this dialogue. The other move tool (the globe icon combined with the hand icon) allows one to move the map content within a map frame.
- V panelu nástrojů Tvůrce map můžete najít dvě tlačítka pro posun prvků. Levé (kurzor výběru se symbolem ruky) vybírá a posouvá prvky v návrhu mapy. Po vybrání prvku tímto nástrojem ho můžete posouvat pomocí kláves šipek. Pro přesné umístění použijte dialog <strong>Pozice a velikost</strong> , který lze nalézt v panelu <strong>Položka → Obecné možnosti → Pozice a velikost</strong>. Pro jednodušší umístění také můžete nastavit specifické kotevní body prvku v rámci tohoto dialogu. Další nástroj přesunu prvků (ikonka globusu s rukou) dovoluje posouvat obsah mapy uvnitř mapového rámu.
+ In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
+
Rotating a map and linking a north arrow
Rotace mapy a napojení ukazatele severu (zeměpisné růžice)
-
- You can rotate a map by setting its rotation value in the <strong>Item tab → Map</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool, the button with the little camera icon. QGIS comes with a selection of north arrows. After the placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
- Mapu můžet rotovat nastavením její rotace v sekci <strong>Karta položky → Mapa</strong>. Pro umístění zeměpisné růžice můžete použít nástroj <strong>Přidat obrázek</strong>, tlačítko s ikonou fotoaparátu. QGIS přichází s nabídkou různých zeměpisných růžic. Po umístění růžice do návrhu mapy ji můžete napojit na specifický rámec mapy aktivováním zaškrtávacího pole <strong>Synchronizovat s mapou</strong> a výběrem daného mapového rámce. Kdykoliv změníte rotaci napojené mapy, zeměpisná růžice podle toho upraví i svojí rotaci.
-
-
- If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
- Pokud napíšete vědeckou publikaci nebo jiný článek odkazující na QGIS, velmi by nás potěšilo, kdybyste mohli zahrnout vaši práci v <a href="http://qgis.org/en/site/about/case_studies/index.html">sekci případových studií</a> domovské stránky Quantum GISu.
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
@@ -62627,10 +48854,6 @@ There was a problem with your symbol database.
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
Můžete přidat proměnnou aktuálního data do vašeho návrhu mapy. Vytvořte klasický textový popisek a přidejte řetězec $CURRENT_DATE(yyyy-MM-dd) do textového okna. Podívejte se na <a href="http://doc.qt.nokia.com/latest/qdate.html#toString">QDate::toString format documentation</a> pro možné formáty data.
-
- You can rotate a map by setting its rotation value in the <strong>Item Properties -> Map</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
- Mapu můžet rotovat nastavením její rotace v sekci <strong>Karta položky -> Mapa</strong>. Pro umístění zeměpisné růžice můžete použít nástroj <strong>Přidat obrázek</strong>, tlačítko s ikonou fotoaparátu. QGIS přichází s nabídkou různých zeměpisných růžic. Po umístění růžice do návrhu mapy ji můžete napojit na specifický rámec mapy aktivováním zaškrtávacího pole <strong>Synchronizovat s mapou</strong> a výběrem daného mapového rámce. Kdykoliv změníte rotaci napojené mapy, zeměpisná růžice podle toho upraví i svojí rotaci.
-
Numeric scale value in map layout linked to map frame
@@ -62656,10 +48879,6 @@ There was a problem with your symbol database.
Stopping rendering
Zastavení vykreslování
-
- Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the small red 'X' icon in the status bar to the bottom right of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
- Někdy máte velký dataset, který trvá věky než se vykreslí. Můžete stisknout Esc (klávesa Escape), nebo kliknout na ikonu s malým červeným "X" ve stavové liště okna vpravo dole a kdykoliv vykreslování zastavit. Pokud se chystáte provést několik akcí (jako např. upravení symbologie) a chcete dočasně vypnout vykreslování mapy během těchto úprav, můžete vyškrtnout pole "Vykreslování" vpravo dole ve stavové liště. Nezapomeňte ho znovu zaškrtnout, až bude chtít mapu zase vykreslit!
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
@@ -62670,15 +48889,21 @@ There was a problem with your symbol database.
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
QGIS má zásuvné moduly, které rozšiřují jeho funkce. QGIS je dodáván s několika základními moduly, které můžete najít v menu Zásuvné moduly->Spravovat zásuvné moduly. Navíc je k dispozici mnoho <a href="http://plugins.qgis.org/"> zásuvných modulů Pythonu poskytnutých uživatelskou komunitou, které mohou být nainstalovány z menu Zásuvné moduly->Načíst zásuvné moduly Python. Neopomeňte vše, co vám QGIS může nabídnout ---vyzkoušejte zásuvné moduly a uvidíte, co pro vás mohou udělat.
-
- Sometimes you have a very large dataset which takes ages to draw. You can press 'esc' (the escape key), or click the small red 'X' icon in the status bar to the bottom right of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
- Někdy máte velký dataset, který trvá věky než se vykreslí. Můžete stisknout Esc (klávesa Escape), nebo kliknout na ikonu s malým červeným "X" ve stavové liště okna vpravo dole a kdykoliv vykreslování zastavit. Pokud se chystáte provést několik akcí (jako např. upravení symbologie) a chcete dočasně vypnout vykreslování mapy během těchto úprav, můžete vyškrtnout pole "Vykreslování" vpravo dole ve stavové liště. Nezapomeňte ho znovu zaškrtnout, až bude chtít mapu zase vykreslit!
-
Join intersected polylines when rendering
Spojte protnuté multilinie při vykreslování
+
+ In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
+
+
+ Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
+
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
@@ -62704,18 +48929,6 @@ There was a problem with your symbol database.
QGIS has Plugins!
QGIS má zásuvné moduly!
-
- If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of Quantum GIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
- Pokud vám QGIS pomáhá šetřit peníze nebo máte rádi naši práci a máte finanční možnost pomoci, zvažte prosím možnost sponzorování vývoje Quantum GISu. Používáme tyto peníze k zaplacení nákladů spojených s náklady spojenými s našimi hackfestsy každé 2 roky a obecně k podpoře cílů našeho projektu. Podívejte se prosím na <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> pro více detailů.
-
-
- Quantum GIS has Plugins!
- Quantum GIS má zásuvné moduly!
-
-
- Quantum GIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage Plugins menu. In addition there are over 150 Python plugins contributed by the user community that can be installed from the Plugins->Fetch Python Plugins menu. Don't miss out on all QGIS has to offer---check out the plugins and see what they can do for you.
- Quantum GIS má zásuvné moduly, které rozšiřují jeho funkce. QGIS je dodáván s několika základními moduly, které můžete najít v menu Zásuvné moduly->Spravovat zásuvné moduly. Navíc je k dispozici přes 150 zásuvných modulů Pythonu poskytnutých uživatelskou komunitou, které mohou být nainstalovány z menu Zásuvné moduly->Načíst zásuvné moduly Python. Neopomeňte vše, co vám QGIS může nabídnout ---vyzkoušejte zásuvné moduly a uvidíte, co pro vás mohou udělat.
-
QgsTipGui
@@ -62742,7 +48955,7 @@ There was a problem with your symbol database.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -62801,88 +49014,6 @@ p, li { white-space: pre-wrap; }
QgsTransformSettingsDialog
-
- Linear
- Lineární
-
-
- Helmert
- Helmertova
-
-
- Projective
- Projektivní
-
-
- Polynomial 1
- Polynomiální 1
-
-
- Polynomial 2
- Polynomiální 2
-
-
- Polynomial 3
- Polynomiální 3
-
-
- Thin Plate Spline
- Thin Plate Spline
-
-
- Info
- Informace
-
-
- Please set output name
- Prosím nastavte název výstupu
-
-
- %1 requires at least %2 GCPs. Please define more
- %1 vyžaduje alespoň %2 GCP bodů. Určete jich prosím víc
-
-
- Invalid output file name
- Nepltaný název výstupního souboru
-
-
- Save raster
- Uložit rastr
-
-
- Select save PDF file
- Zvolte PDF soubor k uložení
-
-
- PDF Format
- PDF formát
-
-
- _modified
- Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
- _upravený
-
Transformation settings
@@ -62903,6 +49034,13 @@ p, li { white-space: pre-wrap; }
Nearest neighbour
Nejbližší soused
+
+ Linear
+ Lineární
+
Cubic
@@ -62923,22 +49061,6 @@ p, li { white-space: pre-wrap; }
Compression:
Komprese:
-
- NONE
- ŹÁDNÁ
-
-
- LZW
- LZW
-
-
- PACKBITS
- PACKBITS
-
-
- DEFLATE
- DEFLATE
-
Output raster:
@@ -62997,57 +49119,80 @@ p, li { white-space: pre-wrap; }
Load in QGIS when done
Po dokončení načíst do QGISu
-
-
- QgsUniqueValueDialog
- default
- výchozí
+ Helmert
+ Helmertova
- Confirm Delete
- Potvrdit smazání
+ Polynomial 1
+ Polynomiální 1
- The classification field was changed from '%1' to '%2'.
-Should the existing classes be deleted before classification?
- Pole klasifikace bylo změněno z '%1' na '%2'.
-Měly by být existující třídy před klasifikací smazány?
-
-
-
- QgsUniqueValueDialogBase
-
- Form1
- Formulář1
+ Polynomial 2
+ Polynomiální 2
- Classify
- Klasifikovat
+ Polynomial 3
+ Polynomiální 3
- Classification field
- Pole klasifikace
+ Thin Plate Spline
+ Thin Plate Spline
- Add class
- Vložit třídu
+ Projective
+ Projektivní
- Delete classes
- Odstranit třídy
+ Info
+ Informace
- Randomize Colors
- Náhodné barvy
+ Please set output name
+ Prosím nastavte název výstupu
- Reset Colors
- Znovu nastavit barvy
+ %1 requires at least %2 GCPs. Please define more
+ %1 vyžaduje alespoň %2 GCP bodů. Určete jich prosím víc
- Restrict changes to common properties
- Omezit změny na běžné vlastnosti
+ Invalid output file name
+ Nepltaný název výstupního souboru
+
+
+ Save raster
+ Uložit rastr
+
+
+ Select save PDF file
+ Zvolte PDF soubor k uložení
+
+
+ PDF Format
+ PDF formát
+
+
+ _modified
+ Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
+ _upravený
@@ -63055,17 +49200,17 @@ Měly by být existující třídy před klasifikací smazány?
Form
- Formulář
+
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
- Uživatel může vybrat jednu z hodnot už použitou v atributu. Pokud je atribut editovatelný, je zobrazena liniová editace s podporou automatického dokončení, jinak je použit combo box.
+
Editable
- Editovatelný
+
@@ -63073,12 +49218,12 @@ Měly by být existující třídy před klasifikací smazány?
Form
- Formulář
+
Adjust scaling range
-
@@ -63086,19 +49231,18 @@ Měly by být existující třídy před klasifikací smazány?
Select a file
- Vybrat soubor
+
Error
- Chyba
+
Could not open file %1
Error was:%2
- Nemohu otevřít soubor %1
-Chyba byla:%2
+
@@ -63106,37 +49250,37 @@ Chyba byla:%2
Form
- Formulář
+
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
- Combo box s předefinovanými položkami. Hodnota je ukládaná v atributu, popis je zobrazen v combo boxu.
+
Load Data from layer
- Načíst data z vrstvy
+
Load Data from CSV file
- Načíst data z CSV souboru
+
Value
- Hodnota
+
Description
- Popis
+
Remove Selected
- Odstranit vybrané
+
@@ -63144,7 +49288,7 @@ Chyba byla:%2
Edit filter expression
- Upravit výraz filtru
+
@@ -63152,52 +49296,52 @@ Chyba byla:%2
Form
- Formulář
+
Select layer, key column and value column
- Zvolte vrstvu. sloupec klíčů a sloupec hodnot
+
Layer
- Vrstva
+
Key column
-
Value column
- Sloupec hodnot
+
Allow null value
- Povolit nulové hodnoty
+
Order by value
- Seřadit podle hodnot
+
Allow multiple selections
- Povolit vícenásobné výběry
+
Filter expression
- Výraz filtru
+
...
- ...
+
@@ -63205,7 +49349,7 @@ Chyba byla:%2
(no selection)
- (žádný výběr)
+
@@ -63281,12 +49425,12 @@ Chyba byla:%2
Simplify Geometries
- Zjednodušit geometrie
Simplify Geometries with topological validation
- Zjednodušit geometrie s topologickou validací
@@ -63324,10 +49468,6 @@ Chyba byla:%2
Discrete
Nespojitý
-
- Continous
- Spojitý
-
Continuous
@@ -63375,10 +49515,6 @@ Chyba byla:%2
Gradient color ramp
Přechodový barevný rozsah
-
- Change
- Změnit
-
Color 1
@@ -63405,11 +49541,6 @@ Chyba byla:%2
Multiple stops
Více zarážek
-
- Offset (%)
- Odsazení (%)
-
Add stop
@@ -63420,189 +49551,29 @@ Chyba byla:%2
Remove stop
Odstranit zarážku
-
- Information
- Informace
-
Color
Barva
- Offset
- Odsazení
+ Offset (%)
+ Odsazení (%)
Preview
Náhled
+
+ Information
+ Informace
+
QgsVectorLayer
-
- ERROR: no provider
- CHYBA: žádný poskytovatel
-
-
- ERROR: layer not editable
- CHYBA: vrstva není editovatelná
-
-
- SUCCESS: attribute %1 was added.
- ÚSPĚCH:atribut %1 byl přidán.
-
-
- ERROR: attribute %1 not added
- CHYBA:atribut %1 nebyl přidán
-
-
- No renderer object
- Žádný objekt vykreslovače
-
-
- Classification field not found
- Klasifikační pole nebylo nalezeno
-
-
- Unknown renderer
- Neznámý vykreslovač
-
-
- renderer failed to save
- selhalo uložení vykreslovače
-
-
- no renderer
- žádný vykreslovač
-
-
- SUCCESS: %n attribute(s) deleted.
- deleted attributes count
-
- ÚSPĚCH: %n atribut smazán.
- ÚSPĚCH: %n atributy smazány.
- ÚSPĚCH: %n atributů smazáno.
-
-
-
- ERROR: %n attribute(s) not deleted.
- not deleted attributes count
-
- CHYBA: %n atribut nebyl smazán.
- CHYBA: %n atributy nebyly smazány.
- CHYBA: %n atributů nebylo smazáno.
-
-
-
- SUCCESS: %n attribute(s) added.
- added attributes count
-
- ÚSPĚCH: %n atribut přidán.
- ÚSPĚCH: %n atributy přidány.
- ÚSPĚCH: %n atributů přidáno.
-
-
-
- ERROR: %n new attribute(s) not added
- not added attributes count
-
- CHYBA: %n nový atribut nebyl přidán
- CHYBA: %n nové atributy nebyly přidány
- CHYBA: %n nových atributů nebylo přidáno
-
-
-
- SUCCESS: %n attribute value(s) changed.
- changed attribute values count
-
- ÚSPĚCH: hodnota %n atributu byla změněna.
- ÚSPĚCH: hodnoty %n atributů byly změněny.
- ÚSPĚCH: hodnoty %n atributů byly změněny.
-
-
-
- ERROR: %n attribute value change(s) not applied.
- not changed attribute values count
-
- ERROR: změna hodnoty%n atributu nebyl aplikována.
- ERROR: změna hodnoty%n atributů nebyla aplikována.
- ERROR: změna hodnoty%n atributů nebyla aplikována.
-
-
-
- SUCCESS: %n feature(s) added.
- added features count
-
- ÚSPĚCH: %n atribut přidán.
- ÚSPĚCH: %n atributy přidány.
- ÚSPĚCH: %n atributů přidáno.
-
-
-
- ERROR: %n feature(s) not added.
- not added features count
-
- CHYBA: %n prvek nebyl přidán.
- CHYBA: %n prvky nebyly přidány.
- CHYBA: %n prvků nebylo přidáno.
-
-
-
- ERROR: %n feature(s) not added - provider doesn't support adding features.
- not added features count
-
- CHYBA: %n prvek nebyl přidán - poskytovatel nepodporuje přidávání prvků.
- CHYBA: %n prvky nebyly přidány - poskytovatel nepodporuje přidávání prvků.
- CHYBA: %n prvků nebylo přidáno - poskytovatel nepodporuje přidávání prvků.
-
-
-
- SUCCESS: %n geometries were changed.
- changed geometries count
-
- ÚSPĚCH: %n geometrie byla změněna.
- ÚSPĚCH: %n geometrie byly změněny.
- ÚSPĚCH: %n geometrií bylo změněno.
-
-
-
- ERROR: %n geometries not changed.
- not changed geometries count
-
- ERROR: %n geometrie nebyla změněna.
- ERROR: %n geometrie nebyly změněny.
- ERROR: %n geometrií nebylo změněno.
-
-
-
- SUCCESS: %n feature(s) deleted.
- deleted features count
-
- ÚSPĚCH: %n atribut smazán.
- ÚSPĚCH: %n atributy smazány.
- ÚSPĚCH: %n atributů smazáno.
-
-
-
- ERROR: %n feature(s) not deleted.
- not deleted features count
-
- CHYBA: %n prvek nebyl smazán.
- CHYBA: %n prvky nebyly smazány.
- CHYBA: %n prvků nebylo smazáno.
-
-
-
-
- Provider errors:
-
- Chyby poskytovatele:
-
Updating feature count for layer %1
@@ -63613,6 +49584,16 @@ Chyba byla:%2
Abort
Přerušit
+
+ ERROR: no provider
+ CHYBA: žádný poskytovatel
+
+
+ ERROR: layer not editable
+ CHYBA: vrstva není editovatelná
+
Commit errors:
@@ -63620,82 +49601,6 @@ Chyba byla:%2
Chyby:
%1
-
- General:
- Všeobecné:
-
-
- Layer comment: %1
- Komentář vrstvy: %1
-
-
- Storage type of this layer: %1
- Typ uložení této vrstvy: %1
-
-
- Source for this layer: %1
- Zdroj pro tuto vrstvu: %1
-
-
- Geometry type of the features in this layer: %1
- Typ geometrie prvků v této vrstvě: %1
-
-
- Primary key attributes:
- Atributy primárního klíče:
-
-
- The number of features in this layer: %1
- Počet prvků v této vrstvě: %1
-
-
- Editing capabilities of this layer: %1
- Editační schopnosti této vrstvy: %1
-
-
- Extents:
- Rozsahy:
-
-
- In layer spatial reference system units :
- Jednotky referenčního prostorového systému vrstvy:
-
-
- xMin,yMin %1,%2 : xMax,yMax %3,%4
- xMin,yMin %1,%2 : xMax,yMax %3,%4
-
-
- unknown extent
- neznámý rozsah
-
-
- In project spatial reference system units :
- Jednotky prostorového referenčného systému projektu:
-
-
- Layer Spatial Reference System:
- Prostorový referenční systém vrstvy:
-
-
- Project (Output) Spatial Reference System:
- Referenční souřadnicový systém projektu (výstupní):
-
-
- (Invalid transformation of layer extents)
- (neplatná transformace rozsahů vrstvy)
-
-
- Attribute field info:
- Informace o položkách atributů:
-
-
- CRS
- SRS
-
General
@@ -63709,68 +49614,89 @@ Chyba byla:%2
Storage type of this layer
-
Description of this provider
- Popis tohoto poskytovatele
Source for this layer
- Zdroj pro tuto vrstvu
Geometry type of the features in this layer
-
Primary key attributes
-
The number of features in this layer
-
Editing capabilities of this layer
-
Extents
- Rozsahy
+ Rozsahy
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
+
+ Error: qgis element could not be found
+
+
+ xMin,yMin %1,%2 : xMax,yMax %3,%4
+ xMin,yMin %1,%2 : xMax,yMax %3,%4
+
+
+ unknown extent
+ neznámý rozsah
+
+
+ (Invalid transformation of layer extents)
+ (neplatná transformace rozsahů vrstvy)
Comment
Komentář
-
- Error: qgis element could not be found
-
-
- Specify CRS for layer %1
- Učit CRS pro vrstvu %1
-
QgsVectorLayerEditBuffer
@@ -63813,41 +49730,25 @@ Chyba byla:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- ÚSPĚCH: %n atribut smazán.
- ÚSPĚCH: %n atributy smazány.
- ÚSPĚCH: %n atributů smazáno.
-
+ ÚSPĚCH: %n atribut smazán. ÚSPĚCH: %n atributy smazány. ÚSPĚCH: %n atributů smazáno.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- CHYBA: %n atribut nebyl smazán.
- CHYBA: %n atributy nebyly smazány.
- CHYBA: %n atributů nebylo smazáno.
-
+ CHYBA: %n atribut nebyl smazán. CHYBA: %n atributy nebyly smazány. CHYBA: %n atributů nebylo smazáno.
SUCCESS: %n attribute(s) added.
added attributes count
-
- ÚSPĚCH: %n atribut přidán.
- ÚSPĚCH: %n atributy přidány.
- ÚSPĚCH: %n atributů přidáno.
-
+ ÚSPĚCH: %n atribut přidán. ÚSPĚCH: %n atributy přidány. ÚSPĚCH: %n atributů přidáno.
ERROR: %n new attribute(s) not added
not added attributes count
-
- CHYBA: %n nový atribut nebyl přidán
- CHYBA: %n nové atributy nebyly přidány
- CHYBA: %n nových atributů nebylo přidáno
-
+ CHYBA: %n nový atribut nebyl přidán CHYBA: %n nové atributy nebyly přidány CHYBA: %n nových atributů nebylo přidáno
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- ÚSPĚCH: hodnota %n atributu byla změněna.
- ÚSPĚCH: hodnoty %n atributů byly změněny.
- ÚSPĚCH: hodnoty %n atributů byly změněny.
-
+ ÚSPĚCH: hodnota %n atributu byla změněna. ÚSPĚCH: hodnoty %n atributů byly změněny. ÚSPĚCH: hodnoty %n atributů byly změněny.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- ERROR: změna hodnoty%n atributu nebyl aplikována.
- ERROR: změna hodnoty%n atributů nebyla aplikována.
- ERROR: změna hodnoty%n atributů nebyla aplikována.
-
+ ERROR: změna hodnoty%n atributu nebyl aplikována. ERROR: změna hodnoty%n atributů nebyla aplikována. ERROR: změna hodnoty%n atributů nebyla aplikována.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- ÚSPĚCH: %n atribut smazán.
- ÚSPĚCH: %n atributy smazány.
- ÚSPĚCH: %n atributů smazáno.
-
+ ÚSPĚCH: %n atribut smazán. ÚSPĚCH: %n atributy smazány. ÚSPĚCH: %n atributů smazáno.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- CHYBA: %n prvek nebyl smazán.
- CHYBA: %n prvky nebyly smazány.
- CHYBA: %n prvků nebylo smazáno.
-
+ CHYBA: %n prvek nebyl smazán. CHYBA: %n prvky nebyly smazány. CHYBA: %n prvků nebylo smazáno.
SUCCESS: %n feature(s) added.
added features count
-
- ÚSPĚCH: %n atribut přidán.
- ÚSPĚCH: %n atributy přidány.
- ÚSPĚCH: %n atributů přidáno.
-
+ ÚSPĚCH: %n atribut přidán. ÚSPĚCH: %n atributy přidány. ÚSPĚCH: %n atributů přidáno.
ERROR: %n feature(s) not added.
not added features count
-
- CHYBA: %n prvek nebyl přidán.
- CHYBA: %n prvky nebyly přidány.
- CHYBA: %n prvků nebylo přidáno.
-
+ CHYBA: %n prvek nebyl přidán. CHYBA: %n prvky nebyly přidány. CHYBA: %n prvků nebylo přidáno.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- CHYBA: %n prvek nebyl přidán - poskytovatel nepodporuje přidávání prvků.
- CHYBA: %n prvky nebyly přidány - poskytovatel nepodporuje přidávání prvků.
- CHYBA: %n prvků nebylo přidáno - poskytovatel nepodporuje přidávání prvků.
-
+ CHYBA: %n prvek nebyl přidán - poskytovatel nepodporuje přidávání prvků. CHYBA: %n prvky nebyly přidány - poskytovatel nepodporuje přidávání prvků. CHYBA: %n prvků nebylo přidáno - poskytovatel nepodporuje přidávání prvků.
SUCCESS: %n geometries were changed.
changed geometries count
-
- ÚSPĚCH: %n geometrie byla změněna.
- ÚSPĚCH: %n geometrie byly změněny.
- ÚSPĚCH: %n geometrií bylo změněno.
-
+ ÚSPĚCH: %n geometrie byla změněna. ÚSPĚCH: %n geometrie byly změněny. ÚSPĚCH: %n geometrií bylo změněno.
ERROR: %n geometries not changed.
not changed geometries count
-
- ERROR: %n geometrie nebyla změněna.
- ERROR: %n geometrie nebyly změněny.
- ERROR: %n geometrií nebylo změněno.
-
+ ERROR: %n geometrie nebyla změněna. ERROR: %n geometrie nebyly změněny. ERROR: %n geometrií nebylo změněno.
QgsVectorLayerProperties
-
- Single Symbol
- Jednoduchý symbol
-
-
- Graduated Symbol
- Odstupňovaný symbol
-
-
- Continuous Color
- Spojitá barva
-
-
- Unique Value
- Jedinečná hodnota
-
-
- Spatial Index
- Prostorový index
-
-
- Creation of spatial index failed
- Vytvoření prostorového indexu selhalo
-
-
- General:
- Všeobecné:
-
-
- Extents:
- Rozsah:
-
-
- In layer spatial reference system units :
- Jednotky referenčního prostorového systému vrstvy:
-
-
- In project spatial reference system units :
- Jednotky prostorového referenčného systému projektu:
-
-
- Layer Spatial Reference System:
- Prostorový referenční systém:
-
-
- Project (Output) Spatial Reference System:
- Referenční souřadnicový systém projektu (výstupní):
-
-
- Attribute field info:
- Informace o položkách atributů:
-
-
- Field
- Pole
-
-
- Type
- Typ
-
-
- Length
- Délka
-
-
- Precision
- Přesnost
-
-
- Comment
- Komentář
-
-
- Default Style
- Výchozí styl
-
-
- QGIS Layer Style File (*.qml)
- QGIS soubor stylu vrstvy (*.qml)
-
-
- id
- id
-
-
- name
- jméno
-
-
- type
- typ
-
-
- length
- délka
-
-
- precision
- přesnost
-
-
- comment
- komentář
-
-
- edit widget
- upravit widget
-
-
- alias
- alias
-
-
- Name conflict
- Konflikt názvů
-
-
- The attribute could not be inserted. The name already exists in the table.
- Atribut nemůže být vložen. V tabulce už existuje tento název.
-
-
- Added attribute
- Přidán atribut
-
-
- Deleted attribute
- Smazán atribut
-
-
- Creation of spatial index successful
- Vytvoření prostorového indexu bylo úspěšné
-
-
- Load layer properties from style file
- Načíst vlastnosti vrstvy ze souboru stylu
-
Load from file
- Načíst ze souboru
+ Načíst ze souboru
Load from database
- Načíst z databáze
Save in database (%1)
-
-
- Not supported
- Není podporován
-
-
- Load default style from:
-
-
- Cancel
- Storno
-
-
- Local database
-
-
- Datasource database
-
-
- Loaded from Provider
- Načteno od poskytovatele
-
-
- No default style was found for this layer
-
-
- Save default style to:
-
-
- Load Style
- Načíst styl
-
-
- Style saved
-
-
- Save layer properties as style file
- Uložit vlastnosti vrstvy jako soubor stylu
-
-
- Saved Style
- Uložený styl
-
-
- Error occured retrieving styles from database
-
-
- The retrieved style is not a valid named style. Error message: %1
-
-
- Transparency: %1%
- Průhlednost: %1%
-
-
- Overlay
- Překrytí
+ Uložit do databáze (%1)
Layer Properties - %1
Vlastnosti vrstvy - %1
-
- Id
- Id
-
-
- Name
- Název
-
-
- Edit widget
- Upravit widget
-
-
- Alias
- Alias
-
Dotaz použitý k omezení zobrazených prvků vrstvy je zobrazen zde. Pro otevření nebo úpravu dotazu, klikněte na tlačítko Tvorba dotazu
- Line edit
- Úprava linie
+ Not supported
+ Není podporován
- Unique values
- Jedinečné hodnoty
+ Spatial Index
+ Prostorový index
- Unique values editable
- Jedinečné hodnoty, editovatelné
+ Creation of spatial index successful
+ Vytvoření prostorového indexu bylo úspěšné
- Classification
- Klasifikace
+ Creation of spatial index failed
+ Vytvoření prostorového indexu selhalo
- Value map
- Mapa hodnot
+ Load default style from:
+ Načíst výchozí styl z:
- Edit range
- Upravit rozsah
+ Cancel
+ Storno
- Slider range
- Rozsah posuvníku
+ Local database
+ Lokální databáze
- Dial range
- Rozsah číselníku
+ Datasource database
+ Databáze datového zdroje
- File name
- Název souboru
+ Default Style
+ Výchozí styl
- Enumeration
- Výčet
+ Loaded from Provider
+ Načteno od poskytovatele
- Immutable
- Nezměnitelný
+ No default style was found for this layer
+ Pro tuto vrstvu nebyl nalezen výchozí styl
- Hidden
- Skrytý
+ Save default style to:
+ Uložit výchozí styl do:
- Checkbox
- Zaškrtávací pole
+ Load layer properties from style file
+ Načíst vlastnosti vrstvy ze souboru stylu
- Text edit
- Úprava textu
+ Load Style
+ Načíst styl
- Calendar
- Kalendář
+ Style saved
+ Styl uložen
- Value relation
- Relace hodnoty
+ Save layer properties as style file
+ Uložit vlastnosti vrstvy jako soubor stylu
- UUID generator
- UUID generátor
+ Saved Style
+ Uložený styl
+
+
+ Error occured retrieving styles from database
+
+
+ The retrieved style is not a valid named style. Error message: %1
+
Save Style
Uložit styl
-
- Text diagram
- Textový diagram
-
-
- Pie chart
- Koláčový graf
-
-
- Map units
- Mapové jednotky
-
-
- UI file
- UI soubor
-
-
- Layer comment: %1
- Komentář vrstvy: %1
-
-
- Storage type of this layer: %1
- Typ uložení této vrstvy: %1
-
-
- Source for this layer: %1
- Zdroj pro tuto vrstvu: %1
-
-
- Geometry type of the features in this layer: %1
- Typ geometrie prvků v této vrstvě: %1
-
-
- The number of features in this layer: %1
- Počet prvků v této vrstvě: %1
-
-
- Editing capabilities of this layer: %1
- Editační schopnosti této vrstvy: %1
-
-
- xMin,yMin %1,%2 : xMax,yMax %3,%4
- xMin,yMin %1,%2 : xMax,yMax %3,%4
-
-
- Empty
- Prázdný
-
-
- (Invalid transformation of layer extents)
- (neplatná transformace rozsahů vrstvy)
-
-
- Load layer properties from style file (.qml)
- Načti vlastnosti vrstvy ze souboru stylů (.qml)
-
-
- Save layer properties as style file (.qml)
- Ulož vlastnosti vrstvy jako soubor stylů (.qml)
-
-
- Select edit form
- Vybrat formulář úpravy
-
-
- UI file (*.ui)
- UI soubor (*.ui)
-
-
- Symbology
- Symbologie
-
-
- Do you wish to use the new symbology implementation for this layer?
- Chcete použít novou symbologii pro tuto vrstvu?
-
-
- Background color
- Barva pozadí
-
-
- Pen color
- Barva pera
-
-
- MM
- MM
-
-
- AroundPoint
- KolemBodu
-
-
- mm
- mm
-
-
- OverPoint
- PřesBod
-
-
- Line
- Linie
-
-
- Horizontal
- Vodorovně
-
-
- Free
- Volně
-
-
- On line
- Na linii
-
-
- Above line
- Nad linií
-
-
- Below Line
- Pod linií
-
-
- Map orientation
- Orientace mapy
-
-
- None
- Žádná
-
QgsVectorLayerPropertiesBase
@@ -64492,30 +50017,108 @@ Chyba byla:%2
Vlastnosti vrstvy
- Symbology
- Symbolika
+ Restore Default Style
+ Obnovit výchozí styl
- General
- Obecné
+ Save As Default
+ Uložit jako výchozí
- Use scale dependent rendering
- Používat vykreslování v závislosti na měřítku
+ A widget to define the scale visibility
+
- Display name
- Zobrazit název
+ A widget to define the scale visibility.
+
- Use this control to set which field is placed at the top level of the Identify Results dialog box.
- Používá se pro nastavení pole, které bude umístněné na nejvyšší úrovni dialogového okna výsledků identifikace.
+ Memory cache
+
- Display field for the Identify Results dialog box
- Zobrazit pole pro dialogové okno Výsledek identifikace
+ Description
+ Popis
+
+
+ Keyword list
+ Seznam klíčových slov
+
+
+ DataUrl
+ DataUrl
+
+
+ Format
+ Formát
+
+
+ Attribution
+
+
+ Url
+ Url
+
+
+ MetadataUrl
+ MetadataUrl
+
+
+ Type
+ Typ
+
+
+ LegendUrl
+
+
+ image/png
+
+
+ image/jpeg
+
+
+ image/jpg
+
+
+ Properties
+ Vlastnosti
+
+
+ Load Style ...
+ Načíst styl ...
+
+
+ Save Style ...
+ Uložit styl ...
Style
Styl
+
+ Labels
+ Popisky
+
+
+ Labels (deprecated)
+ Popisky (neschválené)
+
+
+ Display labels
+ Zobrazit popisky
+
Pole
- This sets the display field for the Identify Results dialog box
- Toto nastaví zobrazování pole výsledků dialogu identifikace
+ General
+ Obecné
- Display field
- Zobrazit pole
-
-
- Edit UI
- Upravit UI
-
-
- ...
- ...
-
-
- Init function
- Init funkce
-
-
- CRS
- SRS
-
-
- Subset
- Subset
+ Specify the coordinate reference system of the layer's geometry.
+ Určit souřadnicový refrenční systém geometrie vrstvy.
Rendering
- Vykreslování
+ Vykreslování
Layer info
- Info o vrstvě
+ Info o vrstvě
Layer source
- Zdroj vrstvy
+ Zdroj vrstvy
Data source encoding
- Kódování datového zdroje
Coordinate reference system
- Souřadnicový referenční systém
+ Souřadnicový referenční systém
Specify...
- Určit...
+ Určit...
Create spatial index
- Vytvořit prostorový index
+ Vytvořit prostorový index
Update extents
- Aktualizovat rozsahy
+
+
+ Scale dependent visibility
+ Viditelnost v závislosti na měřítku
Feature subset
-
Simplify geometry
- Zjednodušit geometrii
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
- pixelů
+ pixelů
Simplify on provider side if possible
- Zjednodušit na straně poskytovatele pokud je to možné
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
displayed as
zobrazena jako
+
+ Metadata
+ Metadata
+
+
+ Title
+ Nadpis
+
+
+ Abstract
+ Abstrakt
+
+
+ Actions
+ Akce
+
Target field
Cílové pole
-
- Create Spatial Index
- Vytvořit prostorový index
-
-
- Metadata
- Metadata
-
-
- Labels
- Popisky
-
-
- Display labels
- Zobrazit popisky
-
-
- Actions
- Akce
-
-
- Restore Default Style
- Obnovit výchozí styl
-
-
- Save As Default
- Uložit jako výchozí
-
-
- A widget to define the scale visibility
-
-
- A widget to define the scale visibility.
-
-
- Memory cache
-
-
- Description
- Popis
-
-
- Keyword list
- Seznam klíčových slov
-
-
- DataUrl
-
-
- Format
- Formát
-
-
- Attribution
-
-
- Url
-
-
- MetadataUrl
-
-
- Type
- Typ
-
-
- LegendUrl
-
-
- image/png
-
-
- image/jpeg
-
-
- image/jpg
-
-
- Properties
- Vlastnosti
-
-
- Load Style ...
- Načíst styl ...
-
-
- Save Style ...
- Uložit styl ...
-
-
- Specify the coordinate reference system of the layer's geometry.
- Určit souřadnicový refrenční systém geometrie vrstvy.
-
-
- Specify CRS
- Určit SRS
-
-
- Legend type
- Typ legendy
-
-
- Transparency
- Průhlednost
-
-
- Field calculator
- Kalkulačka polí
-
-
- Options
- Možnosti
-
-
- Maximum
- Maximum
-
-
- Minimum
- Minimum
-
Diagrams
Diagramy
-
- Display diagrams
- Zobrazit diagramy
-
-
- Diagram type
- Typ diagramu
-
-
- Priority:
- Priorita:
-
-
- Low
- Nízká
-
-
- High
- Vysoká
-
-
- Appearance
- Vzhled
-
-
- Scale dependent visibility
- Viditelnost v závislosti na měřítku
-
-
- Background color
- Barva pozadí
-
-
- Pen color
- Barva pera
-
-
- Data defined position
- Daty definovaná pozice
-
-
- Pen width
- Šířka pera
-
-
- Update Extents
- Aktualizovat rozsahy
-
-
- Current
- Aktuální
-
-
- Provider-specific options
- Specifické možnosti poskytovatele
-
-
- Encoding
- Kódování
-
-
- Title
- Nadpis
-
-
- Abstract
- Abstrakt
-
-
- Font...
- Typ písma...
-
-
- Size
- Velikost
-
-
- Fixed size
- Pevná velikost
-
-
- Scale linearly between 0 and the following attribute value / diagram size:
- Měnit měřítko lineárně mezi 0 a následující hodnotou atributu /velikostí diagramu:
-
-
- Attribute
- Atribut
-
-
- Find maximum value
- Najít maximální hodnotu
-
-
- Size units
- Jednotky velikosti
-
-
- Position
- Pozice
-
-
- Placement
- Umístění
-
-
- Line Options
- Možnosti linie
-
-
- Distance
- Vzdálenost
-
-
- x
- x
-
-
- y
- y
-
-
- Attributes
- Atributy
-
-
- Color
- Barva
-
-
- New symbology
- Nová symbologie
-
-
- Labels (deprecated)
- Popisky (neschválené)
-
-
- New column
- Nový sloupec
-
-
- Ctrl+N
- Ctrl+N
-
-
- Delete column
- Smazat sloupec
-
-
- Ctrl+X
- Ctrl+X
-
-
- Toggle editing mode
- Přepnout editační mód
-
-
- Click to toggle table editing
- Kliknout k přepnutí editace tabulky
-
QgsVectorLayerSaveAsDialog
-
- SpatiaLite
- SpatiaLite
-
-
- Original CRS
- Původní SRS
-
Layer CRS
@@ -65102,7 +50395,7 @@ Chyba byla:%2
<Default>
- <výchozí>
Save vector layer as...
Uložit vektorovou vrstvu jako...
-
- Add saved file to map
- Přidat uložený soubor do mapy
-
-
- CRS
- SRS
-
-
- Save as
- Uložit jako
-
Browse
Procházet
-
- Datasource Options
-
-
- Custom Options
-
-
- Layer Options
-
Encoding
Kódování
- Save only selected features
- CRS
+ SRS
Symbology export
Exportovat symbologii
+
+ Datasource Options
+ Možnosti datového zdroje
+
+
+ Custom Options
+ Vlastní možnosti
+
+
+ Layer Options
+ Možnosti vrstvy
+
+
+ Save as
+ Uložit jako
+
Format
Formát
- OGR creation options
- OGR - možnosti vytváření
+ Save only selected features
+ Uložit pouze vybrané prvky
Skip attribute creation
Přeskočit vytvoření atributu
+
+ Add saved file to map
+ Přidat uložený soubor do mapy
+
1:
@@ -65304,10 +50593,6 @@ Chyba byla:%2
QgsWFSConnectionItem
-
- Failed to retrieve layers
- Selhalo získání vrstev
-
Edit...
@@ -65324,45 +50609,17 @@ Chyba byla:%2
Upravit WFS připojení
-
- QgsWFSData
-
- Loading WFS data
- Načítám WFS data
-
-
- Abort
- Přerušit
-
-
- Loading WFS data
-%1
- Načítám WFS data
-%1
-
-
-
- QgsWFSPlugin
-
- &Add WFS layer
- &Přidat WFS vrstvu
-
-
- Add W&FS layer...
- Přidat W&FS vrstvu...
-
-
QgsWFSProvider
DescribeFeatureType failed for url %1
-
WFS
- WFS
+
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
-
- Error
- Chyba
+
@@ -65424,34 +50677,6 @@ Chyba byla:%2
QgsWFSSourceSelect
-
- Error
- Chyba
-
-
- The capabilities document could not be retrieved from the server
- Soubor schopností nemohl být obdržen ze serveru
-
-
- No Layers
- Žádné vrstvy
-
-
- capabilities document contained no layers.
- Dokument schopností neobsahoval žádné vrstvy.
-
-
- Capabilities document is not valid
- Dokument schopností není platný
-
-
- GetCapabilities Error
- Chyba GetCapabilities
-
&Add
@@ -65472,11 +50697,31 @@ Chyba byla:%2
Network Error
Chyba sítě
+
+ Capabilities document is not valid
+ Dokument schopností není platný
+
Server Exception
Výjimka serveru
+
+ Error
+ Chyba
+
+
+ No Layers
+ Žádné vrstvy
+
+
+ capabilities document contained no layers.
+ Dokument schopností neobsahoval žádné vrstvy.
+
Create a new WFS connection
@@ -65487,6 +50732,11 @@ Chyba byla:%2
Modify WFS connection
Upravit WFS připojení
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+ Opravdu chcete odstranit připojení %1 a k němu přiřazená nastavení?
+
Confirm Delete
@@ -65502,52 +50752,13 @@ Chyba byla:%2
XML files (*.xml *XML)
XML soubory (*.xml *.XML)
-
- Are you sure you want to remove the %1 connection and all associated settings?
- Opravdu chcete odstranit připojení %1 a k němu přiřazená nastavení?
-
QgsWFSSourceSelectBase
- Coordinate reference system
- Souřadnicový referenční systém
-
-
- Server connections
- Připojení k serveru
-
-
- &New
- &Nové
-
-
- Delete
- Smazat
-
-
- Edit
- Upravit
-
-
- C&onnect
- &Připojit
-
-
- Only request features overlapping the current view extent
- Požadovat pouze prvky překrývající aktuální rozsah mapy
-
-
- Change ...
- Změnit ...
+ Add WFS Layer from a Server
+ Přidat WFS vrstvu ze serveru
Display WFS FeatureTypes containing this word in the title, name or abstract
-
+
+ Server connections
+ Připojení k serveru
+
+
+ C&onnect
+ &Připojit
+
+
+ &New
+ &Nové
+
+
+ Edit
+ Upravit
+
+
+ Delete
+ Smazat
Použít nadpis pro název vrstvy
- Title
- Titulek
+ Coordinate reference system
+ Souřadnicový referenční systém
- Name
- Název
-
-
- Abstract
- Abstrakt
-
-
- Cache
-Features
- Vyrovnávací paměť
-Prvků
-
-
- Filter
- Filtr
-
-
- Add WFS Layer from a Server
- Přidat WFS vrstvu ze serveru
-
-
-
- QgsWKNDiagramFactoryWidgetBase
-
- Form
- Formulář
-
-
- Attributes
- Atributy
-
-
- Add
- Přidat
-
-
- Remove
- Odebrat
-
-
- 1
- 1
+ Change ...
+ Změnit ...
@@ -65646,24 +50842,20 @@ Prvků
QgsWMSConnectionItem
-
- Failed to retrieve layers
- Selhalo získání vrstev
-
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
Add selected layers to map
Přidat vybrané vrstvy do mapy
-
- &Save
- &Uložit
-
-
- Save WMS server connections to file
- Uložit připojení k WMS serveru do souboru
-
-
- &Load
- &Načíst
-
-
- Load WMS server connections from file
- Načíst připojení k WMS serveru ze souboru
-
Are you sure you want to remove the %1 connection and all associated settings?
@@ -65722,26 +50898,6 @@ Prvků
Confirm Delete
Potvrdit smazání
-
- encoding %1 not supported.
- kódování %1 nepodporováno.
-
-
- CRS %1 not supported.
- SRS %1 nepodporován.
-
-
- WMS Password for %1
- WMS heslo pro %1
-
-
- WMS Provider
- Poskytovatel WMS
-
Load connections
@@ -65753,96 +50909,50 @@ Prvků
XML soubory (*.xml *.XML)
- Advertised GetMap URL
-
- %2
-
-is different from GetCapabilities URL
-
- %1
-
-This might be an server configuration error. Should the URL be used?
- Ohlášené GetMap URL
-
- %2
-
-je dolišné od GetCapabilities URL
-
- %1
-
-To může být chyba nastavení serveru. Má se toto URL použít?
+ encoding %1 not supported.
+ kódování %1 nepodporováno.
- Advertised GetFeatureInfo URL
-
- %2
-
-is different from GetCapabilities URL
-
- %1
-
-This might be an server configuration error. Should the URL be used?
- Ohlášené GetFeatureInfo URL
-
- %2
-
-je dolišné od GetCapabilities URL
-
- %1
-
-To může být chyba nastavení serveru. Má se toto URL použít?
-
-
- Could not open the WMS Provider
- Nelze kontaktovat poskytovalete WMS
-
-
- Coordinate Reference System (%n available)
- crs count
-
- Souřadnicový referenční systém (%n dostupný)
- Souřadnicové referenční systémy (%n dostupné)
- Souřadnicové referenční systémy (%n dostupných)
-
-
-
- Select layer(s)
- Vyberte vrstvu/y
+ WMS Provider
+ Poskytovatel WMS
Failed to parse WMS URI
-
Failed to download capabilities:
-
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
- Možnosti (%n souřadnicový referenční systém dostupný)
- Možnosti (%n souřadnicové referenční systémy dostupné)
- Možnosti (%n souřadnicových referenčních systémů dostupných)
-
+ Možnosti (%n souřadnicový referenční systém dostupný) Možnosti (%n souřadnicové referenční systémy dostupné) Možnosti (%n souřadnicových referenčních systémů dostupných)
+
+ Select layer(s)
+ Vyberte vrstvu/y
Select either layer(s) or a tileset
Vyberte buď vrstvu/y nebo sadu dlaždic
+
+ Coordinate Reference System (%n available)
+ crs count
+ Souřadnicový referenční systém (%n dostupný) Souřadnicové referenční systémy (%n dostupné) Souřadnicové referenční systémy (%n dostupných)
No common CRS for selected layers.
@@ -65873,24 +50989,13 @@ To může být chyba nastavení serveru. Má se toto URL použít?
%n Layer(s) selected
selected layer count
-
- %n vrstva vybrána
- %n vrstvy vybrány
- %n vrstev vybráno
-
+ %n vrstva vybrána %n vrstvy vybrány %n vrstev vybráno
Tileset selected
Sada dlaždic vybrána
-
- Could not understand the response. The %1 provider said:
-%2
- COMMENTED OUT
- Nerozumím odezvě. Poskytovatel %1 řekl:
-%2
-
Could not understand the response. The %1 provider said:
@@ -65932,24 +51037,20 @@ To může být chyba nastavení serveru. Má se toto URL použít?
QgsWMSSourceSelectBase
- Add Layer(s) from a Server
- Přidat vrstvu(y) ze serveru
+ Ready
+ Připraven
- Save connections to file
- Uložit připojení do souboru
+ Layers
+ Vrstvy
C&onnect
&Připojit
-
- Add Layer(s) from a WM(T)S Server
-
&New
@@ -65999,16 +51100,14 @@ To může být chyba nastavení serveru. Má se toto URL použít?
Abstrakt
- Use base url instead of advertised GetFeatureInfo URL
- Použít základní url místo inzerovaného GetFeatureInfo URL
+ Image encoding
+ Kódování obrázových dat
- Ignore GetMap URL
- Ignorovat GetMap URL
-
-
- Ignore GetFeatureInfo URL
- Ignorovat GetFeatureInfo URL
+ Save connections to file
+ Uložit připojení do souboru
Load
Načíst
+
+ Options
+ Možnosti
+
+
+ Layer name
+ Název vrstvy
+
+
+ Coordinate Reference System
+ Souřadnicový referenční systém
+
+
+ Add Layer(s) from a WM(T)S Server
+
+
+ Change ...
+ Změnit ...
+
Tile size
@@ -66082,14 +51206,6 @@ To může být chyba nastavení serveru. Má se toto URL použít?
Tilesets
Sady dlaždic
-
- Styles
- Styly
-
-
- Size
- Velikost
-
Format
@@ -66115,56 +51231,21 @@ To může být chyba nastavení serveru. Má se toto URL použít?
Search
Hledat
-
- URL
- URL
-
Description
Popis
+
+ URL
+ URL
+
Add selected row to WMS list
Přidat vybraný řádek do seznamu WMS
-
- Image encoding
- Kódování obrázových dat
-
-
- Layers
- Vrstvy
-
-
- Options
- Možnosti
-
-
- Layer name
- Název vrstvy
-
-
- Coordinate Reference System
- Souřadnicový referenční systém
-
-
- Change ...
- Změnit ...
-
-
- Ready
- Připraven
-
QgsWcsCapabilities
@@ -66233,7 +51314,7 @@ This might be due to an incorrect WCS Server URL.
Tag:%3
Response was:
%4
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -66260,7 +51341,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
- WCS
+
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
- %1 z %2 bajtů mapy staženo.
+
@@ -66337,23 +51418,12 @@ Response was:
Cannot describe coverage
-
-
- WCS
- WCS
+
Coverage not found
-
Received coverage has wrong extent %1 (expected %2)
-
+
+ WCS
+ WCS
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
No data received
-
Cannot create memory file
-
-
- %1 of %2 bytes of map downloaded.
- %1 z %2 bajtů mapy staženo.
+
Service Exception
-
Request is for a Coverage not offered by the service instance.
-
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
The WCS vendor also reported:
-
Cannot verify coverage full extent: %1
-
Name (identifier)
-
Title
-
Native CRS
-
Native Bounding Box
-
(and %n more)
crs
-
- (a %n více)
- (a %n více)
- (a %n více)
-
+ (a %n více) (a %n více) (a %n více)
Available in format
-
Coverages
-
Get Coverage Url
-
And %1 more coverages
-
Chyba RasterIO:
-
- QgsWebView
-
- Print
- Tisknout
-
-
QgsWebViewWidget
...
- ...
+
Select a file
- Vybrat soubor
+ Vybrat soubor
@@ -66677,22 +51743,22 @@ Response was:
Form
- Formulář
+ Formulář
Field contains a filename or URL for a webpage
-
Width
-
Height
- Výška
+
@@ -66700,33 +51766,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
- %1 z %2 bytů schopností staženo.
+
Capabilities request redirected.
- Požadavek na schopnosti přesměrován.
+
Redirect loop detected: %1
-
WMS
- WMS
+
empty of capabilities: %1
- bez schopností: %1
+
Download of capabilities failed: %1
- Stažení schopností selhalo: %1
+
@@ -66734,7 +51800,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
- %1 z %2 bajtů mapy staženo.
+
QgsWmsProvider
-
- Property
- Vlastnost
-
-
- Value
- Hodnota
-
-
- WMS Version
- Verze WMS
-
-
- Title
- Titulek
-
Cannot parse URI
-
Cannot calculate extent
- Nemohu vypočítat rozsah
+
Cannot set CRS
-
Number of layers and styles don't match
-
+
+ WMS
+ WMS
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
+
+ Getting map via WMS.
+ Získávám mapu přes WMS.
Getting tiles.
-
+
+ %n tile requests in background
+ tile request count
+ %n požadavek dlaždic v pozadí %n požadavky dlaždic v pozadí %n požadavků dlaždic v pozadí
+
+ , %n cache hits
+ tile cache hits
+ , %n zásah cache , %n zásahy cache , %n zásahů cache
+
+ , %n cache misses.
+ tile cache missed
+ , %n výpadek cache. , %n výpadky cache. , %n výpadků cache.
+
+ , %n errors.
+ errors
+ , %n chyba. , %n chyby. , %n chyb.
+
+ image is NULL
+ obrázek je NULL
+
+
+ unexpected image size
+ neočekávaná velikost obrázku
+
+
+ Status: %1
+Reason phrase: %2
+ Stav: %1
+Fráze příčiny: %2
Redirect loop detected: %1
-
+
+ Dom Exception
+ Výjimka DOM
Service Exception
-
- Abstract
- Abstrakt
-
-
- LegendURLs
-
-
- Tile Layer Properties
-
-
- Keywords
- Klíčová slova
-
-
- Online Resource
- Online zdroj
-
-
- Contact Person
- Kontaktní osoba
-
-
- Fees
- Poplatky
-
-
- Access Constraints
- Omezení přístupu
-
-
- Image Formats
- Formát obrazových dat
-
-
- Layer Count
- Počet vrstev
-
-
- Tile Layer Count
-
-
- Could not get WMS Service Exception: %1 at line %2 column %3
-
-Response was:
-
-%4
-
-
- GetLegendGraphic
-
-
- GetTileUrl
-
-
- Tile templates
-
-
- FeatureInfo templates
-
-
- Identifier
-
-
- Tile mode
-
-
- WMTS
-
-
- WMS-C
-
-
- Invalid tile mode
-
-
- Selected
- Vybrané
-
-
- Selected tile matrix set
-
-
- Scale
- Měřítko
-
-
- Tile size [px]
-
-
- Tile size [mu]
-
-
- Matrix size
-
-
- Matrix extent [mu]
-
-
- Bounds
-
-
- Width
-
-
- Height
- Výška
-
-
- Top
-
-
- Left
- Nalevo
-
-
- Bottom
-
-
- Right
- Napravo
-
-
- %n missing row(s)
-
-
-
-
- Layer's upper bound: %1
-
-
- %n missing column(s)
-
-
-
-
- Layer's left bound: %1
-
-
- Layer's lower bound: %1
-
-
- Layer's right bound: %1
-
-
- Context not fully specified (extent was defined but width and/or height was not).
-
-
- Cannot identify
-
-
- Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
-
- Cannot parse getfeatureinfo: %1
-
-
- GetLegendGraphic request redirected.
-
-
- GetLegendGraphic request error
-
-
- Returned legend image is flawed [URL: %1]
-
-
- Download of GetLegendGraphic failed: %1
-
-
- %1 of %2 bytes of GetLegendGraphic downloaded.
-
-
- Yes
- Ano
-
-
- No
- Ne
-
-
- Visibility
- Viditelnost
-
-
- Visible
- Viditelné
-
-
- Hidden
- Skryté
-
-
- Available in CRS
- Dostupné v CRS
-
-
- Available in style
- Dostupné ve stylu
-
-
- Name
- Název
-
-
- This is probably due to an incorrect WMS Server URL.
- Nastalo pravděpodobně v důsledku nekorektní WMS server URL.
-
-
- %1 of %2 bytes of map downloaded.
- %1 z %2 bajtů mapy staženo.
-
-
- Could not get WMS Service Exception at %1: %2 at line %3 column %4
- Nemoho zjistit výjimku služby WMS na %1: %2 na řádce %3 sloupce %4
-
-
- Request contains a Format not offered by the server.
- Požadavek obsahuje Formát, který není nabízen serverem.
+ Request contains a format not offered by the server.
+ Požadavek obsahuje formát nenabízený serverem.
Request is for an optional operation that is not supported by the server.
Požadavek pro volitelnou operaci, která není podporována serverem.
+
+ (No error code was reported)
+ (žádná chyba nehlášena)
+
+
+ (Unknown error code)
+ (neznámý kód chyby)
+
The WMS vendor also reported:
Prodejce WMS také uvádí:
- Server Properties
- Vlastnosti serveru
+ Property
+ Vlastnost
- Tileset Properties
- Vlastnosti sady dlaždic
+ Value
+ Hodnota
- Cache Stats
- Statistiky vyrovnávací paměti
+ Name
+ Název
- Identify Formats
- Rozpoznat formáty
+ Visibility
+ Viditelnost
+
+
+ Visible
+ Viditelné
+
+
+ Hidden
+ Skryté
+
+
+ Title
+ Titulek
+
+
+ Abstract
+ Abstrakt
Mohu rozpoznat
- number of layers and styles don't match
- počet vrstev a stylů nesouhlasí
+ Yes
+ Ano
- WMS
- WMS
-
-
- image is NULL
- obrázek je NULL
-
-
- unexpected image size
- neočekávaná velikost obrázku
-
-
- Tile request error
- Chyba požadavku dlaždice
-
-
- Status: %1
-Reason phrase: %2
- Stav: %1
-Fráze příčiny: %2
-
-
- response: %1
- odezva: %1
-
-
- Returned image is flawed [%1]
- Vrácený obraz je vadný [%1]
-
-
- Map request error
- Chyba požadavku mapy
-
-
- Response: %1
- Odezva: %1
-
-
- empty capabilities document
- prázdný dokument
-
-
- Could not get WMS capabilities: %1 at line %2 column %3
-This is probably due to an incorrect WMS Server URL.
-Response was:
-
-%4
- Nemohu získat WMS schopnosti: %1 na řádku %2 sloupec %3
-To je zřejmě kvůli nesprávnému URL WMS Serveru.
-Odpověď byla:
-
-%4
-
-
- Could not get WMS capabilities in the expected format (DTD): no %1 or %2 found.
-This might be due to an incorrect WMS Server URL.
-Tag:%3
-Response was:
-%4
- Nemohu získat WMS schopnosti v očekávaném formátu (DTD): ani %1 ani %2 nenalezeno.
-To je zřejmě kvůli nesprávnému URL WMS Serveru.
-Štítek: %3
-Odpověď byla:
-%4
-
-
- Could not get WMS Service Exception at %1: %2 at line %3 column %4
-
-Response was:
-
-%5
- Nemohu získat Výjimku služby WMS na %1: %2 na řádku %3 sloupec %4
-
-Odpověď byla:
-%5
-
-
- Request contains a format not offered by the server.
- Požadavek obsahuje formát nenabízený serverem.
-
-
- composed error message '%1'.
- vytvořená chybová zpráva '%1'.
-
-
- mismatch layers=%1, styles=%2 and crs=%3.
- neshoda vrstev=%1, stylů=%2 a crs=%3.
-
-
- no extent for layer
- žádný rozsah pro vrstvu
+ No
+ Ne
Pevná výška
- WGS 84 Bounding Box
- Okrajový rámec WGS84
-
-
- Available Styles
-
-
- Available Tilesets
-
-
- Format not supported
- Formát není podporován
-
-
- Get feature info request error (Title:%1; Error:%2; URL: %3)
-
-
- GML schema is not valid
-
-
- GML is not valid
-
-
- Map getfeatureinfo error %1: %2
- Map getfeatureinfo chyba %1: %2
-
-
- ERROR: GetFeatureInfo failed
- CHYBA: GetFeatureInfo selhalo
-
-
- Map getfeatureinfo error: %1 [%2]
- Map getfeatureinfo chyba: %1 [%2]
-
-
- Selected Layers:
- Vybrané vrstvy:
-
-
- Other layers:
- Další vrstvy:
-
-
- Styles
- Styly
-
-
- CRS
- SRS
-
-
- Bounding Box
- Ohraničení
-
-
- Available in Resolutions
- Dostupný v rozlišeních
-
-
- Hits
-
-
- Misses
- Omyly
-
-
- Errors
- Chyby
-
-
- Layer cannot be queried in plain text.
- Vrstva neůže být dotazována v holém textu.
-
-
- Layer cannot be queried.
- Na vrstvu se nelze dotazovat.
-
-
- Map request error %1: %2
- Chyba požadavku mapy %1: %2
-
-
- Dom Exception
- Výjimka DOM
-
-
- Getting map via WMS.
- Získávám mapu přes WMS.
-
-
- Getting tiles via WMS.
- Získávám dlaždice přes WMS.
-
-
- %n tile requests in background
- tile request count
-
- %n požadavek dlaždic v pozadí
- %n požadavky dlaždic v pozadí
- %n požadavků dlaždic v pozadí
-
-
-
- , %n cache hits
- tile cache hits
-
- , %n zásah cache
- , %n zásahy cache
- , %n zásahů cache
-
-
-
- , %n cache misses.
- tile cache missed
-
- , %n výpadek cache.
- , %n výpadky cache.
- , %n výpadků cache.
-
-
-
- , %n errors.
- errors
-
- , %n chyba.
- , %n chyby.
- , %n chyb.
-
-
-
- tile request err %1: %2
- chyba požadavku dlaždice %1: %2
-
-
- map request error %1: %2
- chyba požadavku mapy %1: %2
-
-
-
-Tried URL: %1
-
-Vyzkoušeno URL: %1
-
-
- Capabilities request redirected.
- Požadavek na schopnosti přesměrován.
-
-
- empty of capabilities: %1
- bez schopností: %1
-
-
- Download of capabilities failed: %1
- Stažení schopností selhalo: %1
-
-
- %1 of %2 bytes of capabilities downloaded.
- %1 z %2 bytů schopností staženo.
-
-
- Could not get WMS capabilities: %1 at line %2 column %3
-
- Nemohu získat schopnosti WMS: %1 na řádku %2 sloupci %3
-
-
- Could not get WMS capabilities in the expected format (DTD): no %1 or %2 found
-
- Nemohu získat schopnosti WMS v očekávaném formátu (DTD): žádné %1 nebo %2 nalezeno
-
-
-
- (No error code was reported)
- (žádná chyba nehlášena)
-
-
- (Unknown error code)
- (neznámý kód chyby)
+ Available in CRS
+ Dostupné v CRS
(and %n more)
crs
-
- (a %n více)
- (a %n více)
- (a %n více)
-
+ (a %n více) (a %n více) (a %n více)
+
+ Available in style
+ Dostupné ve stylu
+
+
+ LegendURLs
+
+
+ Server Properties
+ Vlastnosti serveru
Jiné vrstvy
- Tileset Count
- Počet dlaždic v sadě
+ Tile Layer Properties
+
+
+ Cache Stats
+ Statistiky vyrovnávací paměti
+
+
+ WMS Version
+ Verze WMS
+
+
+ Keywords
+ Klíčová slova
+
+
+ Online Resource
+ Online zdroj
+
+
+ Contact Person
+ Kontaktní osoba
+
+
+ Fees
+ Poplatky
+
+
+ Access Constraints
+ Omezení přístupu
+
+
+ Image Formats
+ Formát obrazových dat
+
+
+ Identify Formats
+ Rozpoznat formáty
+
+
+ Layer Count
+ Počet vrstev
+
+
+ Tile Layer Count
+
+
+ Could not get WMS Service Exception: %1 at line %2 column %3
+
+Response was:
+
+%4
+
GetFeatureInfoUrl
GetFeatureInfoUrl
+
+ GetLegendGraphic
+
+
+ GetTileUrl
+
+
+ Tile templates
+
+
+ FeatureInfo templates
+
+
+ Tileset Properties
+ Vlastnosti sady dlaždic
+
+
+ Identifier
+
+
+ Tile mode
+
+
+ WMTS
+
+
+ WMS-C
+
+
+ Invalid tile mode
+
+
+ Selected
+ Vybrané
+
+
+ Available Styles
+
+
+ CRS
+ SRS
+
+
+ Bounding Box
+ Ohraničení
+
+
+ Available Tilesets
+
+
+ Selected tile matrix set
+
+
+ Scale
+ Měřítko
+
+
+ Tile size [px]
+
+
+ Tile size [mu]
+
+
+ Matrix size
+
+
+ Matrix extent [mu]
+
+
+ Bounds
+
+
+ Width
+ Šířka
+
+
+ Height
+ Výška
+
+
+ Top
+
+
+ Left
+
+
+ Bottom
+
+
+ Right
+
+
+ %n missing row(s)
+
+
+ Layer's upper bound: %1
+
+
+ %n missing column(s)
+
+
+ Layer's left bound: %1
+
+
+ Layer's lower bound: %1
+
+
+ Layer's right bound: %1
+
Cache stats
Statistiky vyrovnávací paměti
+
+ Hits
+
+
+ Misses
+ Omyly
+
+
+ Errors
+ Chyby
+
+
+ Format not supported
+
+
+ Context not fully specified (extent was defined but width and/or height was not).
+
+
+ Get feature info request error (Title:%1; Error:%2; URL: %3)
+
+
+ GML schema is not valid
+
+
+ GML is not valid
+
+
+ Cannot identify
+
+
+ Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
+
identify request redirected.
Požadavek identifikace přesměrován.
+
+ Map getfeatureinfo error %1: %2
+ Map getfeatureinfo chyba %1: %2
+
+
+ Cannot parse getfeatureinfo: %1
+
+
+ Map getfeatureinfo error: %1 [%2]
+ Map getfeatureinfo chyba: %1 [%2]
+
+
+ GetLegendGraphic request redirected.
+
+
+ GetLegendGraphic request error
+
+
+ Returned legend image is flawed [URL: %1]
+
+
+ Download of GetLegendGraphic failed: %1
+
+
+ %1 of %2 bytes of GetLegendGraphic downloaded.
+
QgsWmsTiledImageDownloadHandler
Tile request error
- Chyba požadavku dlaždice
+
Status: %1
Reason phrase: %2
- Stav: %1
-Fráze příčiny: %2
+
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
- %n požadavek dlaždic v pozadí
- %n požadavky dlaždic v pozadí
- %n požadavků dlaždic v pozadí
-
+
, %n cache hits
tile cache hits
-
- , %n zásah cache
- , %n zásahy cache
- , %n zásahů cache
-
+
, %n cache misses.
tile cache missed
-
- , %n výpadek cache.
- , %n výpadky cache.
- , %n výpadků cache.
-
+
, %n errors.
errors
-
- , %n chyba.
- , %n chyby.
- , %n chyb.
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
QgsWmtsDimensionsBase
-
- Dialog
- Dialog
-
Select dimensions
-
Zrušit...
-
- QuickPrintGui
-
- Portable Document Format (*.pdf)
- Přenosný formát dokumentů (*.pdf)
-
-
- quickprint
- rychlý tisk
-
-
- Unknown format: %1
- Neznámý formát: %1
-
-
-
- QuickPrintGuiBase
-
- QGIS Quick Print Plugin
- QGIS zásuvný modul rychlého tisku
-
-
- Map title
- Nadpis mapy
-
-
- Map name
- Název mapy
-
-
- Copyright
- Copyright
-
-
- Page size
- Velikost stránky
-
-
- Output
- Výstup
-
-
- Use last filename but incremented.
- Použij posledni jméno souboru, ale navýšené.
-
-
- last used filename but incremented will be shown here
- posledně použité jméno souboru (navýšené) bude ukázáno zde
-
-
- Prompt for file name
- Dotaz na jméno souboru
-
-
- Note: If you want more control over the map layout please use the map composer function in QGIS.
- Poznámka: Jestliže chcete více ovlivnit mapový výstup, prosím použijte nástroj Tvůrce map v QGISu.
-
-
-
- QuickPrintPlugin
-
- Quick Print
- Rychlý tisk
-
-
- &Quick Print
- &Rychlý tisk
-
-
- Provides a way to quickly produce a map with minimal user input.
- Umožňuje rychlé vytvoření mapy s minimálním úsilím uživatele.
-
-
RecordDialog
Record Metadata
-
@@ -67962,11 +52730,6 @@ Fráze příčiny: %2
Direction field
Směrové pole
-
- Reverse direction
- Zpětný směr
-
Value for forward direction
@@ -67987,6 +52750,16 @@ Fráze příčiny: %2
Speed field
Pole rychlosti
+
+ km/h
+ km/h
+
+
+ m/s
+ m/s
+
Default settings
@@ -68007,6 +52780,11 @@ Fráze příčiny: %2
Forward direction
Přímý směr
+
+ Reverse direction
+ Zpětný směr
+
Cost
@@ -68022,20 +52800,6 @@ Fráze příčiny: %2
Speed
Rychlost
-
- Units
- Jednotky
-
-
- km/h
- km/h
-
-
- m/s
- m/s
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
RoadGraphPlugin
-
- Road graph settings
- Nastavení silničního grafu
-
-
- Show road's direction
- Nastavit směr silnice
-
-
- About
- O programu
-
Settings
@@ -68216,146 +52968,105 @@ Fráze příčiny: %2
Road graph plugin settings
Nastavení zásuvného modul Silniční graf
-
- Roads direction viewer
- Prohlížeč směrů silnic
-
-
- About Road graph plugin
- O zásuvném modulu Silniční graf
-
Road graph
Silniční graf
-
- About RoadGraph
- O Silničním grafu
-
-
- Find shortest path on road's graph
- Najít nejkratší cestu na silničním grafu
-
-
- <b>Developers:</b>
- <b>Vývojáři:</b>
-
-
- <b>Homepage:</b>
- <b>Domovská stránka:</b>
-
-
- Close
- Zavřít
-
-
-
- SEXTANTE
-
- Analysis
- Analýza
-
-
- &SEXTANTE toolbox
- &SEXTANTE nástroje
-
-
- &SEXTANTE modeler
- &SEXTANTE modeler
-
-
- &SEXTANTE history and log
- &SEXTANTE historie a záznam
-
-
- &SEXTANTE options and configuration
- &SEXTANTE možnosti a konfigurace
-
-
- &SEXTANTE results viewer
- &SEXTANTE prohlížeč výsledků
-
SLDatabase
Run &Vacuum
-
&Database
- &Databáze
+
Sorry
- Promiňte
+ Promiňte
No database selected or you are not connected to it.
- Není vybrána žádná databáze, nebo nejste k žádné připojeni.
+
SaDbTableModel
+ Schema
- Schéma
+ Schéma
+ Table
- Tabulka
+ Tabulka
+ Type
- Typ
+ Typ
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretace linie
+ Interpretace linie
+ Geometry column
- Sloupec s geometrií
+ Sloupec s geometrií
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Uložit připojení
+ Uložit připojení
+ Should the existing connection %1 be overwritten?
- Má být existující připojení %1 přepsáno?
+ Má být existující připojení %1 přepsáno?
+ Failed to load interface
- Selhalo načtení rozhraní
+ Selhalo načtení rozhraní
+ Test connection
- Vyzkoušet spojení
+ Vyzkoušet spojení
+ Connection to %1 was successful
- Spojení k %1 bylo úspěšné
+ Spojení k %1 bylo úspěšné
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Připojení selhalo. Zkontrolujte nastavení a zkuste znovu.
+ Připojení selhalo. Zkontrolujte nastavení a zkuste znovu.
SQL Kdekoliv - chybový kód: %1
Popis: %2
@@ -68364,369 +53075,374 @@ Popis: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Vytvořit nové připojení SQL Kdekoliv
+ Vytvořit nové připojení SQL Kdekoliv
+ Connection Information
- Informace o připojení
+ Informace o připojení
+ Name
- Název
+ Název
+ Host
- Hostitel
+ Hostitel
+ Port
- Port
+ Port
+ Server
- Server
+ Server
+ Database
- Databáze
+ Databáze
+ Connection Parameters
- Parametry připojení
+ Parametry připojení
+ Username
- Jméno uživatele
+ Jméno uživatele
+ Password
- Heslo
+ Heslo
+ Name of the new connection
- Název nového připojení
+ Název nového připojení
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Název nebo IP adresa počítače hostícím databázový server (ponechte prázdné pro lokální připojení)
+ Název nebo IP adresa počítače hostícím databázový server (ponechte prázdné pro lokální připojení)
+ Port number used by the database server (leave blank for default 2638)
- Číslo portu používané databázového serveru (ponechte prázdné nebo výchozí 2638)
+ Číslo portu používané databázového serveru (ponechte prázdné nebo výchozí 2638)
+ Name of the database server (leave blank for default server on host)
- Název databázového serveru (ponechte prázdné pro výchozí server na hostiteli)
+ Název databázového serveru (ponechte prázdné pro výchozí server na hostiteli)
+ Name of the database (leave blank for default database on server)
- Název databáze (ponechte prázdné pro výchozí databázi na serveru)
+ Název databáze (ponechte prázdné pro výchozí databázi na serveru)
+ Additional connection parameters
- Doplňkové parametry připojení
+ Doplňkové parametry připojení
+ Database username
- Uživatelské jméno databáze
+ Uživatelské jméno databáze
+ Database password
- Heslo databáze
-
-
- Save Username
- Uložit uživatelské jméno
+ Heslo databáze
+ Save the connection username in the registry
- Uložit uživatelské jméno připojení do registru
+ Uložit uživatelské jméno připojení do registru
+ Save Username
+ Uložit uživatelské jméno
+
+
+ &Test Connect
- &Test připojení
-
-
- Save Password
- Uložit heslo
+ &Test připojení
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Uložit heslo připojení v registru (VAROVÁNÍ: NENÍ ZABEZPEČENO)
+ Uložit heslo připojení v registru (VAROVÁNÍ: NENÍ ZABEZPEČENO)
- Simple Encryption
- Jednoduché šifrování
+ Save Password
+ Uložit heslo
+ Encrypt packets using simple encryption
- Zašifrovat packety s použitím jednoduchého šifrování
+ Zašifrovat packety s použitím jednoduchého šifrování
- Estimate table metadata
- Odhadnout metadata tabulky
+ Simple Encryption
+ Jednoduché šifrování
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Použije odhady pro určité vlastnosti vrstvy jako mohutnost, rozsah atd. (zlepšuje výkon)
+ Použije odhady pro určité vlastnosti vrstvy jako mohutnost, rozsah atd. (zlepšuje výkon)
- Search other users' tables
- Hledat tabulky ostatních uživatelů
+ Estimate table metadata
+ Odhadnout metadata tabulky
+ Search for geometry columns in tables owned by other users
- Hledat sloupce geometrie v tabulkách vlastněných ostatními uživateli
-
-
-
- SaQueryBuilder
-
- &Test
- &Test
+ Hledat sloupce geometrie v tabulkách vlastněných ostatními uživateli
- &Clear
- &Vyčistit
-
-
- Invalid Query
- Neplatný dotaz
-
-
- Setting the query failed
- Nastavení dotazu selhalo
-
-
- No Query
- Žádný dotaz
-
-
- You must create a query before you can test it
- Musíte vytvořit dotaz před jeho testováním
-
-
- Query Result
- Výsledek dotazu
-
-
- The where clause returned %n row(s).
- returned test rows
-
- Podmínka where vrátila %n řádek.
- Podmínka where vrátila %n řádky.
- Podmínka where vrátila %n řádek.
-
-
-
- Query Failed
- Dotaz selhal
-
-
- An error occurred when executing the query
- Při spouštění dotazu došlo k chybě
-
-
- Error in Query
- Chyba v dotazu
-
-
- The subset string could not be set
- Řetězec subsady nemohl být nastaven
+ Search other users' tables
+ Hledat tabulky ostatních uživatelů
SaSourceSelect
+ &Add
- &Přidat
-
-
- &Build Query
- &Vytvořit dotaz
+ &Přidat
+ &Set Filter
- &Nastavit filtr
+ &Nastavit filtr
+ Wildcard
- Zástupný znak
+ Zástupný znak
+ RegExp
- RegExp
+ RegExp
+ All
- Všechno
+ Všechno
+ Schema
- Schéma
+ Schéma
+ Table
- Tabulka
+ Tabulka
+ Type
- Typ
+ Typ
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretace linie
+ Interpretace linie
+ Geometry column
- Sloupec s geometrií
+ Sloupec s geometrií
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Opravdu chcete odstranit připojení %1 a k němu přiřazená nastavení?
+ Opravdu chcete odstranit připojení %1 a k němu přiřazená nastavení?
+ Confirm Delete
- Potvrdit smazání
+ Potvrdit smazání
+ Select Table
- Vyberte tabulku
+ Vyberte tabulku
+ You must select a table in order to add a layer.
- Musíte vybrat tabulku aby bylo možné přidat vrstvu.
+ Musíte vybrat tabulku aby bylo možné přidat vrstvu.
+ Failed to load interface
- Načtení rozhraní selhalo
+ Načtení rozhraní selhalo
+ Connection failed
- Připojení selhalo
+ Připojení selhalo
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Připojeník databázi %1 selhalo. Zkontrolujte nastavení a zkuste znovu.
+ Připojeník databázi %1 selhalo. Zkontrolujte nastavení a zkuste znovu.
Chybový kód SQL Kdekoliv: %2
Popis: %3
+ No accessible tables found
- Nebyly nalezeny žádné přístupné tabulky
+ Nebyly nalezeny žádné přístupné tabulky
+ Database connection was successful, but no tables containing geometry columns were %1.
- Databázové připojení bylo úspěšné, ale žádné tabulky obsahující sloupce geometrie nebyly %1.
+ Databázové připojení bylo úspěšné, ale žádné tabulky obsahující sloupce geometrie nebyly %1.
+ found
- nalezeno
+ nalezeno
+ found in your schema
- nalezeno ve Vašem schématu
+ nalezeno ve Vašem schématu
SaSourceSelectBase
+ Add SQL Anywhere layer
- Přidat vrstvu SQL Kdekoliv
+ Přidat vrstvu SQL Kdekoliv
+ SQL Anywhere Connections
- Připojení SQL Kdekoliv
+ Připojení SQL Kdekoliv
+ Delete
- Smazat
+ Smazat
+ Edit
- Upravit
+ Upravit
+ New
- Nový
+ Nový
+ Connect
- Připojit
-
-
- Build query
- Vytvořit dotaz
+ Připojit
+ Search options
- Možnosti hledání
+ Možnosti hledání
+ Search
- Hledat
+ Hledat
+ Search mode
- Režim hledání
+ Režim hledání
+ Search in columns
- Hledat ve sloupcích
+ Hledat ve sloupcích
SaveAsPythonScriptAction
I/O error
- Chyba vstupu/výstupu
+ Chyba vstupu/výstupu
Unable to save edits. Reason:
- %1
- Nemohu uložit změny. Důvod:
- %1
+ %s
+ Nemohu uložit změny. Důvod:
+ %s
ScriptEditorDialog
Python scripts (*.py)
- Python skripty (*.py)
Processing R script (*.rsx)
- Zpracovávám R script (*.rsx)
Save script
- Uložit skript
I/O error
- Chyba vstupu/výstupu
+ Chyba vstupu/výstupu
Unable to save edits. Reason:
%s
-
-
- Script was correctly saved.
- Skript v pořádku uložen.
+ Nemohu uložit změny. Důvod:
+ %s
@@ -68741,11 +53457,6 @@ Popis: %3
Server Connections
Připojení k serveru
-
- C&onnect
- &Připojit
-
Edit
@@ -68761,6 +53472,16 @@ Popis: %3
&New
&Nové
+
+ C&onnect
+ &Připojit
+
+
+ Subdatasets
+ Subdatasety
+
Selection
@@ -68776,226 +53497,185 @@ Popis: %3
Ready
Připraven
-
- Subdatasets
- Subdatasety
-
-
-
- SelectionFeature
-
- ring %1, vertex %2
- prstenec %1, vertex %2
-
-
- polygon %1, ring %2, vertex %3
- polygon %1, prstenec %2, vertex %3
-
-
- polyline %1, vertex %2
- čára %1, vertex %2
-
-
- vertex %1
- vertex %1
-
-
- point %1
- bod %1
-
-
- single point
- jednotlivý bod
-
-
- Node tool
- Nástroj uzlů
-
-
- Result geometry is invalid. Reverting last changes.
-
- Výsledná geometrie je neplatná. Ruším poslední změny.
-
SettingsDialogPythonConsole
Editor
- Editor
Auto-save script before running
- Automaticky uložit skripty před spuštěním
Font and Colors
- Typ písma a barvy
Default:
- Výchozí:
Keyword:
- Klíčové slovo:
Class name:
- Název třídy:
Function:
- Funkce:
Decorator:
- Dekorátor:
Comment:
- Komentář:
+ Komentář:
Comment block:
- Blok komentářů:
Cursor:
- Kurzor:
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
- Pozadí:
Reset to default colors
- Obnovit výchozí barvy
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
- Automatické dokončování
Get autocompletion from current document
-
from Document
- z Dokumentu
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
- Chyba:
Automatic parentheses insertion
-
Enable Object Inspector (switching between tabs may be slow)
-
Console
- Konzole
+ Konzole
APIs
-
Using preloaded APIs file
-
Path
- Cesta
+ Cesta
Using prepared APIs file
-
Compile APIs...
-
-
- API file
- API soubor
-
-
- Browse
- Procházet
-
-
- Using preloaded API file
- Používám přednačtený API soubor
+
Settings Python Console
-
-
-
- SextanteToolbox
-
- SEXTANTE Toolbox
- SEXTANTE nástroje
-
-
- Click here to configure
-additional algorithm providers
- Klikněte zde pro nastavení
-doplňkových poskytovatelů algoritmů
-
-
- Enter algorithm name to filter list
- Zadejte název algoritmu do seznamu filtrů
-
-
- Search...
- Hledat...
-
-
- Execute
- Spustit
-
-
- Execute as batch process
- Spustit jako dávkový proces
-
-
- Edit rendering styles for outputs
- Upravit vykreslovací styly pro výstupy
-
-
- Warning
- Upozornění
-
-
- Recently used algorithms
- Naposledy použité algoritmy
+
@@ -69124,20 +53751,24 @@ doplňkových poskytovatelů algoritmů
SqlAnywhere
+ Add SQL Anywhere Layer...
- Přidat vrstva SQL Kdekoliv...
+ Přidat vrstva SQL Kdekoliv...
+ Store vector layers within a SQL Anywhere database
- Skladovat vektorové vrstvy v databázi SQL Kdekoliv
+ Skladovat vektorové vrstvy v databázi SQL Kdekoliv
+ Invalid Layer
- Neplatná vrstva
+ Neplatná vrstva
+ %1 is an invalid layer and cannot be loaded.
- %1 je neplatná vrstva a nemůže být načtena.
+ %1 je neplatná vrstva a nemůže být načtena.
@@ -69152,14 +53783,6 @@ doplňkových poskytovatelů algoritmů
Unit
Jednotka
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
Opacity
@@ -69171,12 +53794,9 @@ doplňkových poskytovatelů algoritmů
Barva
- Symbol
- Symbol
-
-
- Change
- Změnit
+ Open Library
+ Otevřít knihovnu
Symbols in group
-
-
- Open Library
-
-
- Saved styles
- Uložené styly
+
Symbol Name
Název symbolu
-
- Style
- Styl
-
Advanced
@@ -69302,35 +53909,16 @@ doplňkových poskytovatelů algoritmů
Geometry
Geometrie
+
+ Error loading output shapefile:
+%s
+
Created output shapefile:
%s
%s
-
-
- Error loading output shapefile:
-%s
- Chyba načítání výstupního shapefile:
-%s
-
-
- Created output shapefile:
-%1
-%2
-
-Would you like to add the new layer to the TOC?
- Vytvořen výstupní shapefile:
-%1
-%2
-
-Chcete přidat novou vrstvu do aktuálního mapového okna?
-
-
- Error loading output shapefile:
-%1
- Chyba načítání výstupního shapefile:
-%1
+
Feature
@@ -69355,18 +53943,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Please specify input field
Zkontrolujte prosím vstupní pole
-
- Check geometry validity
- Zkontrolovat platnost geometrie
-
-
- Geometry errors
- Chyby geometrie
-
-
- Total encountered errors
- Celkem se vyskytlo chyb
-
List unique values
Výpis jedinečných hodnot
@@ -69418,15 +53994,7 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Force point inside polygon
-
-
- Marker
- Značka
-
-
- Change
- Změnit
+
@@ -69436,22 +54004,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Form
Formulář
-
- Settings
- Nastavení
-
-
- Border color
- Barva ohraničení
-
-
- Change
- Změnit
-
-
- Fill color
- Barvy výplně
-
Colors
@@ -69467,53 +54019,40 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Border
Ohraničení
-
- Symbol width
- Šířka symbolu
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
Left
- Nalevo
+ Nalevo
HCenter
-
Right
- Napravo
+ Napravo
Top
- Vrchol
VCenter
-
Bottom
- Úpatí
Outline style
-
Šířka obrysu
- Symbol height
- Výška symbolu
+ Rotation
+ Rotace
Anchor point
-
Offset X,Y
- Odsazení X,Y
+
- Rotation
- Rotace
+ Symbol width
+ Šířka symbolu
- Data defined settings
- Daty definované nastavení
-
-
- Outline color
- Barva ohraničení
-
-
- Shape
- Objekt
+ Symbol height
+ Výška symbolu
@@ -69566,18 +54098,49 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Formulář
- Font family
- Rodina písem
+ Offset X,Y
+ Odsazení X,Y
- Color
- Barva
+ Rotation
+ Rotace
- Change
- Změnit
+ Anchor point
+
+
+ Left
+ Nalevo
+
+
+ HCenter
+
+
+ Right
+
+
+ Top
+
+
+ VCenter
+
+
+ Bottom
+
Velikost
- Millimeter
- Milimetr
+ Color
+ Barva
- Map unit
- Mapová jednotka
-
-
- Rotation
- Rotace
+ Font family
+ Rodina písem
°
°
-
- Offset X,Y
- Odsazení X,Y
-
-
- Anchor point
-
-
- Left
- Nalevo
-
-
- HCenter
-
-
- Right
- Napravo
-
-
- Top
-
-
- VCenter
-
-
- Bottom
-
WidgetGradientFill
Form
- Formulář
+
Two color
- Dvoubarevný
Color ramp
- Barevný rozsah
+ Barevný rozsah
Gradient type
- Barevný přechod
Linear
- Lineární
+ Lineární
Radial
- Kruhový
Conical
-
Coord mode
-
Object
- Objekt
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
x
- x
+
y
- y
+
Feature centroid
- Centroid objektu
Reference Point 2
-
Angle
- Úhel
+ Úhel
°
- °
+ °
Data defined properties...
- Daty definované vlastnosti...
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
+ Daty definované vlastnosti...
Offset X,Y
- Odsazení X,Y
-
-
-
- WidgetLineDecoration
-
- Form
- Formulář
-
-
- Color
- Barva
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
-
- Change
- Změnit
-
-
- Pen width
- Šířka pera
+ Odsazení X,Y
@@ -69811,39 +54296,15 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Angle
Úhel
-
- Distance
- Vzdálenost
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
-
- Line width
- Šířka čáry
-
-
- Color
- Barva
-
Data defined properties...
Daty definované vlastnosti...
- Change
- Změnit
-
-
- Outline
- Ohraničení
+ Distance
+ Vzdálenost
Form
Formulář
-
- Marker
- Značka
-
-
- Marker interval
- Odstup značek
-
-
- Line offset
- Odsazení čáry
-
-
- Change
- Změnit
-
Marker placement
@@ -69885,14 +54329,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
with interval
s intervalem
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
on every vertex
@@ -69911,13 +54347,18 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Offset along line
-
Rotate marker
Rotovat značku
+
+ Line offset
+ Odsazení čáry
+
Data defined properties
@@ -69936,37 +54377,11 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Form
Formulář
-
- Marker
- Značka
-
-
- Change
- Změnit
-
-
- Horizontal distance
- Vodorovná vzdálenost
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
Vertical distance
Svislá vzdálenost
-
- Horizontal displacement
- Vodorovný posun
-
Vertical displacement
@@ -69977,6 +54392,16 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Data defined properties...
Daty definované vlastnosti...
+
+ Horizontal displacement
+ Vodorovný posun
+
+
+ Horizontal distance
+ Vodorovná vzdálenost
+
WidgetSVGFill
@@ -69986,23 +54411,20 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Formulář
- Texture width
- Šířka textury
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
+ Border width
+ Šířka ohraničení
Rotation
Rotace
+
+ Texture width
+ Šířka textury
+
Colors
@@ -70023,27 +54445,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Data defined properties...
Daty definované vlastnosti...
-
- Color
- Barva
-
-
- Border color
- Barva ohraničení
-
-
- Border width
- Šířka ohraničení
-
-
- Outline
- Ohraničení
-
-
- Change
- Změnit
-
SVG Groups
@@ -70065,65 +54466,57 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Form
- Formulář
+ Formulář
Gradient colors
- Barvy přechodu
Two color
- Dvoubarevný
Color ramp
- Barevný rozsah
+ Barevný rozsah
Shading style
- Stínování
Shade whole shape
- Stínovat celý objekt
Ignore rings in polygons while shading
- Ignorovat prstence v polygonech při stínování
Shade to a set distance:
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
+
Blur strength
- Síla rozostření
Offset X,Y
- Odsazení X,Y
+ Odsazení X,Y
Data defined properties...
- Daty definované vlastnosti...
+ Daty definované vlastnosti...
@@ -70134,18 +54527,20 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Formulář
- Color
- Barva
+ Offset X,Y
+ Odsazení X,Y
+
+
+ Border width
+ Šířka ohraničení
Fill style
Typ výplně
-
- Border color
- Barva ohraničení
-
Colors
@@ -70159,25 +54554,7 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Join style
- Styl spojů
-
-
- Border width
- Šířka ohraničení
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
-
- Offset X,Y
- Odsazení X,Y
+
Border
Ohraničení
-
- Change
- Změnit
-
WidgetSimpleLine
@@ -70211,19 +54584,16 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Color
Barva
+
+ Change
+ Změnit
+
Pen width
Šířka pera
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
Offset
@@ -70245,9 +54615,9 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Styl konců
- Change
- Změnit
+ Use custom dash pattern
+ Použít vlastní čárkovanou šablonu
Draw line only inside polygon
-
-
- Use custom dash pattern
- Použít vlastní čárkovanou šablonu
+ Kreslit čáru pouze uvnitř polygonu
@@ -70278,12 +54643,9 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Formulář
- Border color
- Barva ohraničení
-
-
- Fill color
- Barvy výplně
+ Size
+ Velikost
Border
Ohraničení
-
- Size
- Velikost
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
Outline style
- Obrysový styl
Outline width
Šířka obrysu
+
+ Anchor point
+ Kotvící bod
+
+
+ Left
+
+
+ HCenter
+
+
+ Right
+
+
+ Top
+
+
+ VCenter
+
+
+ Bottom
+
+
+ Data defined properties...
+ Daty definované vlastnosti...
+
+
+ Colors
+ Barvy
+
Angle
@@ -70333,55 +54727,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Offset X,Y
Odsazení X,Y
-
- Anchor point
-
-
- Left
- Nalevo
-
-
- HCenter
-
-
- Right
- Napravo
-
-
- Top
-
-
- VCenter
-
-
- Bottom
-
-
- Data defined properties...
- Daty definované vlastnosti...
-
-
- Colors
- Barvy
-
-
- Change
- Změnit
-
WidgetSvgMarker
@@ -70390,24 +54735,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Form
Formulář
-
- Size
- Velikost
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
-
- Angle
- Úhel
-
Colors
@@ -70431,59 +54758,57 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Anchor point
- Kotvící bod
Left
- Nalevo
+
HCenter
-
Right
- Napravo
+
Top
-
VCenter
-
Bottom
-
Data defined properties...
Daty definované vlastnosti...
-
- Change
- Změnit
-
-
- Color
- Barva
-
Border width
Šířka ohraničení
- Border color
- Barva ohraničení
+ Angle
+ Úhel
+
+
+ Size
+ Velikost
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
- Relativní cesta
@@ -70541,11 +54866,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Form
Formulář
-
- X attribute
- X atribut
-
Y attribute
@@ -70556,15 +54876,20 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Scale
Měřítko
+
+ X attribute
+ X atribut
+
Vector field type
Typ vektorového pole
- Cartesian
- Kartézský
+ Height only
+ Pouze výška
Polární
- Distance unit
- Jednotka vzdálenosti
-
-
- Millimeter
- Milimetr
-
-
- Map unit
- Mapová jednotka
-
-
- Height only
- Pouze výška
+ Cartesian
+ Kartézský
Ve směru hodin. ručiček od severu
- LineStyle
- LineStyle
-
-
- change
- změnit
+ Distance unit
+ Jednotka vzdálenosti
@@ -70633,17 +54942,17 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
XML Request / Response
-
Request
-
Response
-
@@ -70676,10 +54985,6 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Validate Extent
Ověřit rozsah
-
- Toggle Error Markers
- Zapnout značky chyb
-
Topology not checked yet
@@ -70693,12 +54998,12 @@ Chcete přidat novou vrstvu do aktuálního mapového okna?
Show topology errors
-
Show errors
- Zobrazit chyby
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -70932,7 +55237,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -70942,7 +55247,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
-
- <h3>Manage and install Plugins</h3>
-
-<p>
-Manage and install plugins.
-</p>
-
-
-<a href="#installedtab">Installed tab</a><br/>
-<a href="#getmoretab">Get more tab</a><br/>
-<a href="#newtab">New tab</a><br/>
-<a href="#upgradabletab">Upgradable tab</a><br/>
-<a href="#invalidtab">Invalid tab</a><br/>
-<a href="#settingstab">Settings tab</a><br/>
-
-<a name="installedtab">
-<h4>Installed tab</h4>
-</a>
-<p>
-This tab shows you the list of currently installed plugins on your system. Both
-python and C++ plugins are listed.
-</p>
-<p>
-You can enable or disable them by clicking the checkbox in front of the name.<br/>
-Selecting an item show the plugin information in the detail pane.
-</p>
-<p>
-There is a context menu (right click) available, to change the sorting on:
-name, number of downloads, votes and status.
-</p>
-
-
-<a name="getmoretab">
-<h4>Get more tab</h4>
-</a>
-<p>
-This tab shows you the list of available plugins from the remote repositories.
-It is downloaded once if you start up. But you can change that in the Settings
-</p>
-<p>
-Selecting an item shows you the plugin information in the detail pane.
-</p>
-
-<a name="newtab">
-<h4>New tab</h4>
-</a>
-<p>
-This tab will be shown when a new plugin is made available! It will be shown
-just once.
-</p>
-
-<a name="upgradabletab">
-<h4>Upgradable tab</h4>
-</a>
-<p>
-This tab is only available if one of your installed plugins can be upgraded
-from the remote repositories.
-</p>
-
-<a name="Invalid tab">
-<h4>Invalid tab</h4>
-</a>
-<p>
-This tab is only available if there is a invalid plugin. Mostly caused by an error
-during loading the plugin.
-</p>
-
-<a name="settingstab">
-<h4>Settings tab</h4>
-</a>
-<p>
-In this tab you can change the Settings for the plugin manager.
-</p>
-<p>
-It is possible to check how often QGIS will download the list and update information
-from the available repositories.
-</p>
-<p>
-By checking the 'Show experimental plugins' checkbox, all plugins will be shown
-in the lists, even the ones that are considered 'experimental' by the author.
-
-<table border=1 width='95%' align='center'><tr><td>
-Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
-</td></tr></table>
-
-</p>
-
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
+
+ <h3>Manage and install Plugins</h3>
+
+<p>
+Manage and install plugins.
+</p>
+
+
+<a href="#installedtab">Installed tab</a><br/>
+<a href="#getmoretab">Get more tab</a><br/>
+<a href="#newtab">New tab</a><br/>
+<a href="#upgradabletab">Upgradable tab</a><br/>
+<a href="#invalidtab">Invalid tab</a><br/>
+<a href="#settingstab">Settings tab</a><br/>
+
+<a name="installedtab">
+<h4>Installed tab</h4>
+</a>
+<p>
+This tab shows you the list of currently installed plugins on your system. Both
+python and C++ plugins are listed.
+</p>
+<p>
+You can enable or disable them by clicking the checkbox in front of the name.<br/>
+Selecting an item show the plugin information in the detail pane.
+</p>
+<p>
+There is a context menu (right click) available, to change the sorting on:
+name, number of downloads, votes and status.
+</p>
+
+
+<a name="getmoretab">
+<h4>Get more tab</h4>
+</a>
+<p>
+This tab shows you the list of available plugins from the remote repositories.
+It is downloaded once if you start up. But you can change that in the Settings
+</p>
+<p>
+Selecting an item shows you the plugin information in the detail pane.
+</p>
+
+<a name="newtab">
+<h4>New tab</h4>
+</a>
+<p>
+This tab will be shown when a new plugin is made available! It will be shown
+just once.
+</p>
+
+<a name="upgradabletab">
+<h4>Upgradable tab</h4>
+</a>
+<p>
+This tab is only available if one of your installed plugins can be upgraded
+from the remote repositories.
+</p>
+
+<a name="Invalid tab">
+<h4>Invalid tab</h4>
+</a>
+<p>
+This tab is only available if there is a invalid plugin. Mostly caused by an error
+during loading the plugin.
+</p>
+
+<a name="settingstab">
+<h4>Settings tab</h4>
+</a>
+<p>
+In this tab you can change the Settings for the plugin manager.
+</p>
+<p>
+It is possible to check how often QGIS will download the list and update information
+from the available repositories.
+</p>
+<p>
+By checking the 'Show experimental plugins' checkbox, all plugins will be shown
+in the lists, even the ones that are considered 'experimental' by the author.
+
+<table border=1 width='95%' align='center'><tr><td>
+Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
+</td></tr></table>
+
+</p>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -72378,16 +56761,6 @@ Click on one of the icons along the top of the composer window to select what ty
dxf2shpConverterGui
-
- Polygon
- Polygon
-
-
- Point
- Bod
-
Dxf Importer
@@ -72398,10 +56771,6 @@ Click on one of the icons along the top of the composer window to select what ty
Input and output
Vstup a výstup
-
- Input Dxf file
- Vložit DXF soubor
-
Input DXF file
@@ -72418,6 +56787,11 @@ Click on one of the icons along the top of the composer window to select what ty
Output file
Výstupní soubor
+
+ Export text labels
+ Exportovat textové značky
+
Output file type
@@ -72429,9 +56803,14 @@ Click on one of the icons along the top of the composer window to select what ty
Polylinie
- Export text labels
- Exportovat textové značky
+ Polygon
+ Polygon
+
+
+ Point
+ Bod
+
+ Choose a DXF file to open
+ Vyberte DXF soubor k otevření
+
DXF files
DXF soubory
-
- Shapefile
- Shapefile
-
-
- DXF files (*.dxf)
- DXF soubory (*.dxf)
-
Choose a file name to save to
Vyberte název souboru pro uložení
- Shapefile (*.shp)
- Shapefile (*.shp)
-
-
- Choose a DXF file to open
- Vyberte DXF soubor k otevření
+ Shapefile
+ Shapefile
@@ -72583,11 +56954,26 @@ Pro podporu pošlete email na adresu scala@itc.cnr.it
Connection to [%1.%2] established
Spojení k [%1.%2] navázáno
+
+ connected
+ připojeno
+
+
+ Tables
+ Tabulky
+
Connection to [%1.%2] failed: %3
Připojení k [%1.%2] selhalo: %3
+
+ Error: Parse error at line %1, column %2: %3
+ Chyba: Chyba parsování na řádku %1, sloupci %2: %3
+
Error: Unabled to open file [%1]
@@ -72603,21 +56989,6 @@ Pro podporu pošlete email na adresu scala@itc.cnr.it
Error: Could not create temporary file, process halted
Chyba: Nemohu vytvořit dočasný soubor, proces zastaven
-
- connected
- připojeno
-
-
- Tables
- Tabulky
-
-
- Error: Parse error at line %1, column %2: %3
- Chyba: Chyba parsování na řádku %1, sloupci %2: %3
-
Error: A database connection is not currently established
@@ -72632,6 +57003,11 @@ Pro podporu pošlete email na adresu scala@itc.cnr.it
Database Connection
Databázové připojení
+
+ Predefined Queries
+ Předdefinované dotazy
+
Load predefined queries
@@ -72647,11 +57023,6 @@ Pro podporu pošlete email na adresu scala@itc.cnr.it
The description of the selected query.
Popis vybraného dotazu.
-
- Predefined Queries
- Předdefinované dotazy
-
Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
@@ -72666,7 +57037,7 @@ Pro podporu pošlete email na adresu scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -72870,17 +57241,17 @@ p, li { white-space: pre-wrap; }
Event Browser - Displaying records 01 of %1
Prohlížeč událostí - Zobrazuji záznamy 01 of %1
+
+ Attribute Contents
+ Obsah atributu
+
Event Browser - Displaying records %1 of %2
Prohlížeč událostí - Zobrazuji záznamy %1 z %2
-
- Attribute Contents
- Obsah atributu
-
Select Application
@@ -72944,6 +57315,16 @@ p, li { white-space: pre-wrap; }
Options
Možnosti
+
+ File path
+ Cesta k souboru
+
+
+ Attribute containing path to file
+ Atribut obsahující cestu k souboru
+
Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
@@ -72954,11 +57335,26 @@ p, li { white-space: pre-wrap; }
If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
Když zaškrtnuto, cesta k obrázku bude definována připojením atributu v poli vybraném z níže umístěného rozbalovacího seznamu jako "Atribut obsahující cestu k obrázku".
+
+ Path is relative
+ Cesta je relativní
+
If checked, the relative path values will be saved for the next session.
Když zaškrtnuto, hodnoty relativních cest se uloží pro další sezení.
+
+ Remember this
+ Zapamatovat toto
+
Resets the values on this line to the default setting.
Vrátí hodnoty tohoto řádku na výchozí nastavení.
-
- If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
- Když zaškrtnuto, bude v oknu QGISu na vrchu bodu pro tento obrázek zobrazena šipka ukazující ve směru definovaném atributem vybraným v rozbalovacím seznamu vpravo.
-
-
- Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
- Použijte rozbalovací seznam k výběru pole obsahujícího magnetický kurz. Tento kurz obvykle značí směr záběru kamery při získání obrázku.
-
-
- If checked, the Display Compass Bearing values will be saved for the next session.
- Když zaškrtnuto, budou zobrazené hodnoty magnetického kurzu uloženy pro další sezení.
-
-
- A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
- Hodnota pro přidání k magnetickému kurzu. To vám umožňuje kompenzaci magnetické úchylky (nastavení správného magnetického severu pomocí sebraných kurzů). Odchylky východu by měly být zadány za použití kladných hodnot aodchylku západu záporných hodnot.
-
-
- Define the compass offset using a field from the vector layer attribute table.
- Určit odchylku kompasu za použití polez atributové tabulky vektorové vrstvy.
-
-
- From Attribute
- Z atributu
-
-
- Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
- Použijte rozbalovací seznam k výběru pole obsahujícího odchylku magnetického kurzu. To vám umožňuje kompenzaci magnetické úchylky (nastavení správného magnetického severu pomocí sebraných kurzů). Odchylky východu by měly být zadány za použití kladných hodnot aodchylku západu záporných hodnot.
-
-
- Define the compass offset manually.
- Určit odchylku kompasu manuálně.
-
-
- Manual
- Manuálně
-
-
- If checked, the compass offset values will be saved for the next session.
- Když zaškrtnuto, hodnoty odchylky kompasu budou uloženy pro další sezení.
-
-
- Resets the compass offset values to the default settings.
- Obnoví hodnoty odchylky kompasu na původní nastavení.
-
-
- The base path or url from which images and documents can be “relative”
- Základní cesta nebo url vůči kterému mohou obrázky nebo dokumenty být “relativní”
-
-
- Base Path
- Základní cesta
-
-
- Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
- Zadá výchozí "Základní cestu" která je cestou k adresáři vektorové vrstvy obsahující informace o obrázku.
-
-
- If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
- Když zaškrtnuto, použijí se pravidla pro cesty definované pro obrázky i pro neobrázková data jako filmy, textové dokumenty a zvukové soubory. Pokud není zaškrtnuto, tato pravidla se použijí pouze na obrázky a ostatní dokumenty budou parametr Základní cesta ignorovat.
-
-
- The Base Path onto which the relative path defined above will be appended.
- Základní cesta, ke které bude připojena relativní cesta definovaná výše.
-
-
- File path
- Cesta k souboru
-
-
- Attribute containing path to file
- Atribut obsahující cestu k souboru
-
-
- Path is relative
- Cesta je relativní
-
-
- Remember this
- Zapamatovat toto
-
Attribute containing compass bearing
Atribut obsahující magnetický kurz
+
+ Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
+ Použijte rozbalovací seznam k výběru pole obsahujícího magnetický kurz. Tento kurz obvykle značí směr záběru kamery při získání obrázku.
+
+
+ If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
+ Když zaškrtnuto, bude v oknu QGISu na vrchu bodu pro tento obrázek zobrazena šipka ukazující ve směru definovaném atributem vybraným v rozbalovacím seznamu vpravo.
+
Display compass bearing
Zobrazit magnetický kurz
+
+ If checked, the Display Compass Bearing values will be saved for the next session.
+ Když zaškrtnuto, budou zobrazené hodnoty magnetického kurzu uloženy pro další sezení.
+
Compass offset
Odchylka kompasu
+
+ Define the compass offset manually.
+ Určit odchylku kompasu manuálně.
+
+
+ Manual
+ Manuálně
+
+
+ A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
+ Hodnota pro přidání k magnetickému kurzu. To vám umožňuje kompenzaci magnetické úchylky (nastavení správného magnetického severu pomocí sebraných kurzů). Odchylky východu by měly být zadány za použití kladných hodnot aodchylku západu záporných hodnot.
+
+
+ Define the compass offset using a field from the vector layer attribute table.
+ Určit odchylku kompasu za použití polez atributové tabulky vektorové vrstvy.
+
+
+ From Attribute
+ Z atributu
+
+
+ Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
+ Použijte rozbalovací seznam k výběru pole obsahujícího odchylku magnetického kurzu. To vám umožňuje kompenzaci magnetické úchylky (nastavení správného magnetického severu pomocí sebraných kurzů). Odchylky východu by měly být zadány za použití kladných hodnot aodchylku západu záporných hodnot.
+
+
+ If checked, the compass offset values will be saved for the next session.
+ Když zaškrtnuto, hodnoty odchylky kompasu budou uloženy pro další sezení.
+
+
+ Resets the compass offset values to the default settings.
+ Obnoví hodnoty odchylky kompasu na původní nastavení.
+
Relative paths
Relativní cesty
+
+ The base path or url from which images and documents can be “relative”
+ Základní cesta nebo url vůči kterému mohou obrázky nebo dokumenty být “relativní”
+
+
+ Base Path
+ Základní cesta
+
+
+ The Base Path onto which the relative path defined above will be appended.
+ Základní cesta, ke které bude připojena relativní cesta definovaná výše.
+
If checked, the Base Path will be saved for the next session.
Když zaškrtnuto, Základní cesta bude uložena pro další sezení.
+
+ Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
+ Zadá výchozí "Základní cestu" která je cestou k adresáři vektorové vrstvy obsahující informace o obrázku.
+
If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
@@ -73145,6 +57511,11 @@ Základní cestou (tj. v atributu ponechat pouze název souboru)
Clears the check-box on this line.
Vyčistí zaškrtávací pole na tomto řádku.
+
+ If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
+ Když zaškrtnuto, použijí se pravidla pro cesty definované pro obrázky i pro neobrázková data jako filmy, textové dokumenty a zvukové soubory. Pokud není zaškrtnuto, tato pravidla se použijí pouze na obrázky a ostatní dokumenty budou parametr Základní cesta ignorovat.
+
Apply Path to Image rules when loading docs in external applications
@@ -73237,8 +57608,8 @@ Základní cestou (tj. v atributu ponechat pouze název souboru)
fTools
- Quantum GIS version detected:
- Zjištěna verze Quantum GISu:
+ QGIS version detected:
+
This version of fTools requires at least QGIS version 1.0.0
@@ -73246,18 +57617,6 @@ Plugin will not be enabled.
Tato verze fTools vyžaduje alespoň QGIS verze 1.0.0
Plugin nebude aktivován.
-
- &Vector
- &Vektor
-
-
- Vect&or
- Vekt&or
-
-
- QGIS version detected:
- Zjištěna verze QGISu:
-
&Analysis Tools
&Analytické nástroje
@@ -73422,22 +57781,10 @@ Plugin nebude aktivován.
&Data Management Tools
&Nástroje práce s daty
-
- Create spatial index
- Vytvořit prostorový index
-
-
- Export to new projection
- Exportovat do nové projekce
-
Define current projection
Definovat aktuální projekci
-
- Join attributes
- Připojit atributy
-
Join attributes by location
Připojit atributy podle umístění
@@ -73451,14 +57798,14 @@ Plugin nebude aktivován.
Sloučit shapefile soubory do jednoho
- fTools Information
- Informace o fTools
+ Create spatial index
+ Vytvořit prostorový index
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -73474,1857 +57821,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -75377,10 +59670,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -75394,10 +59687,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -75418,10 +59711,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -75434,12 +59727,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -75455,16 +59748,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -75493,15 +59786,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -75518,17 +59811,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -75542,17 +59835,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -75568,16 +59861,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -75591,10 +59884,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -75607,10 +59900,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -75624,12 +59917,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -75643,12 +59936,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -75663,17 +59956,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -75683,10 +59976,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -75701,12 +59994,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -75720,12 +60013,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -75739,10 +60032,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -75759,12 +60052,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -75778,17 +60071,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -75803,10 +60096,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -75817,12 +60110,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -75836,17 +60129,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -75859,12 +60152,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -75881,14 +60174,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -75902,15 +60195,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -75919,15 +60212,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -75958,14 +60251,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -75984,14 +60277,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -76096,12 +60389,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -76115,10 +60408,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -76132,10 +60425,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -76152,10 +60445,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -76171,9 +60464,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -76202,14 +60495,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Point y ordinate
Y-ordináta bodu
-
- Point x coordinate
- X-souřadnice bodu
-
-
- Point y coordinate
- Y-souřadnice bodu
-
grasslabel
@@ -76411,27 +60696,27 @@ Returns a string representation of a color based on its hue, saturation, value a
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Change the type of boundary dangle to line
-
Concentric circles
Soustředné kruhy
-
- Config
- Nastavení
-
Connect nodes by shortest route (traveling salesman)
@@ -76552,19 +60833,11 @@ Returns a string representation of a color based on its hue, saturation, value a
Convert GRASS binary vector to GRASS ASCII vector
Převést binární vektor GRASS na GRASS ASCII vektor
-
- Convert a raster to vector
- Převést rastr na vektor
-
Convert a raster to vector within GRASS
Převést rastr na vektor uvnitř GRASSu
-
- Convert a vector to raster
- Převést vektor na rastr
-
Convert a vector to raster within GRASS
@@ -76683,7 +60956,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Create aspect raster from DEM (digital elevation model)
-
Create random raster
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create slope raster from DEM (digital elevation model)
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
Database management
Správa databází
-
- Database parameters
- Parametry databáze
-
Delaunay triangulation (areas)
@@ -76932,12 +61201,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Develop images and group
-
Develop map
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Execute any SQL statement
-
-
- Export
- Export
+
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export from GRASS
Exportovat z GRASSu
-
- Export raster
- Exportovat rastr
-
Export raster as non-georeferenced PNG image format
@@ -77147,54 +61408,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Export raster to various formats (GDAL library)
Převést rastr do různých formátů (knihovna GDAL)
-
- Export vector
- Exportovat vektor
-
-
- Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
-
- Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
-
- Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
-
- Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
-
- Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
-
- Link GDAL supported raster as GRASS raster
-
-
- Link GDAL supported raster loaded in QGIS as GRASS raster
-
-
- Link all GDAL supported rasters in a directory as GRASS rasters
-
-
- Export vector table
- Exportovat vektorovou tabulku
-
Export vector from GRASS
@@ -77225,10 +61438,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Export vector to POV-Ray
Exportovat vektor do POV-Ray
-
- Export vector to PostGIS
- Exportovat vektor do PostGIS
-
Export vector to PostGIS (PostgreSQL) database table
@@ -77294,10 +61503,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Feature type (for polygons, choose Boundary)
Typ prvků (pro polygony zvolte Hranice)
-
- File
- Soubor
-
File management
@@ -77306,22 +61511,22 @@ Returns a string representation of a color based on its hue, saturation, value a
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
Najít nejkratší cestu ve vektorové síti
-
- GDAL raster layer
- GDAL rastrová vrstva
-
GRASS MODULES
@@ -77362,6 +61563,31 @@ Returns a string representation of a color based on its hue, saturation, value a
Generalization
Zobecnění
+
+ Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
+
+
+ Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
+
+
+ Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
+
+
+ Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
+
+
+ Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
+
Generate surface
@@ -77395,7 +61621,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Imagery
Obraz
-
- Import
- Import
-
Import ASCII raster
@@ -77466,10 +61688,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Import OGR vectors in a given data source combining them in a GRASS vector
Importovat OGR vektory v zadaném zdroji dat a zkombinovat je do GRASS vektoru
-
- Import OGR/PostGIS vector and create a fitted location
- Importovat OGR/PostGIS vektor a vytvořit vhodné umístění
-
Import SPOT VGT NDVI
@@ -77545,10 +61763,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Import only some layers of a DXF vector
Importovat pouze některé vrstvy z DXF vektoru
-
- Import raster
- Importovat rastr
-
Import raster from ASCII polygon/line
@@ -77579,10 +61793,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Import text file
Importovat textový soubor
-
- Import vector
- Importovat vektor
-
Import vector from gps using gpsbabel
@@ -77648,6 +61858,21 @@ Returns a string representation of a color based on its hue, saturation, value a
Line-of-sight raster analysis
Přímočará analýza rastru
+
+ Link GDAL supported raster as GRASS raster
+
+
+ Link GDAL supported raster loaded in QGIS as GRASS raster
+
+
+ Link all GDAL supported rasters in a directory as GRASS rasters
+
Loaded layer
@@ -77661,7 +61886,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Minimum size for each basin (number of cells)
-
Name for the output raster map (optional)
Název výstupní rastrové mapy (volitelné)
-
- Name of the table to create
- Název vytvářené tabulky
-
Neighborhood analysis
@@ -77772,14 +61993,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Number of rows to be skipped
Počet řádků k přeskočení
-
- OGR file
- OGR soubor
-
-
- OGR vector layer
- OGR vektorová vrstva
-
Others
@@ -77803,7 +62016,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Output raster values along user-defined transect line(s)
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
-
- Region
- Region
+
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
Přejmenovat sloupec v atributové tabulce
-
- Report and statistics
- Zpráva a statistiky
-
Reports
@@ -78106,7 +62311,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Sample raster at site locations
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Thin no-zero cells that denote line features
-
Zero-crossing edge detection raster function for image processing
-
optionsDialog
Warning!
-
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -78542,7 +62747,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Add Rule
- Přidat pravidlo
No layer
Žádná vrstva
-
- Add New Rule
- Přidat nové pravidlo
-
Delete Rule
@@ -78631,62 +62832,62 @@ Returns a string representation of a color based on its hue, saturation, value a
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
Z-Score:
Z-Score:
-
- Feature %1 contains an unnested hole
- Prvek %1 obsahuje nevnořenou díru
-
-
- Feature %1 is not closed
- Prvek %1 není uzavřený
-
-
- Feature %1 is self intersecting
- Prvek %1 protíná sám sebe
-
-
- Feature %1 has incorrect node ordering
- Prvek %1 má nesprávné pořadí uzlů
-
widgetNumberInput
Form
- Formulář
+ Formulář
Open number input dialog
-
...
- ...
+
@@ -78830,12 +63015,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- Formulář
+
...
- ...
+
-
+
\ No newline at end of file
diff --git a/i18n/qgis_da.ts b/i18n/qgis_da.ts
index d30308a5cf0..9b7483016a2 100644
--- a/i18n/qgis_da.ts
+++ b/i18n/qgis_da.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Bibliotek:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> geometry_columns-tabellen findes ikke!
Denne tabel er essentiel for mange GIS-programmer for optælling af tabeller.
@@ -417,13 +415,13 @@ Denne tabel er essentiel for mange GIS-programmer for optælling af tabeller.Scripts:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> De installerede skripts version passer ikke til version af de frigivne scripts!
Dette er formentlig resultatet af en forkert PostGIS-opgradering.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Denne bruger har ikke tilladelse til at læse indholdet af geometry_columns-tabellen!
Denne tabel er essentiel for mange GIS-programmer til optælling af tabeller.
@@ -2096,7 +2094,7 @@ Dette kan medføre uventede resultater.
længdefelt
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Kan ikke slette eksisterende shapefil
%s
@@ -2249,8 +2247,7 @@ Vil du føje det nye lag til oversigten?
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
- Pt. tillader QGIS ikke samtidig tilgang fra forskellige tråde til den samme datakilde. Vær sikker på, at dine lags attribut-tabeller er lukkede.
-Fortsæt?
+
Distance matrix
@@ -2406,47 +2403,24 @@ Er du sikker på, at du vil fortsætte?
fjerner fra nuværende selektion
- Select by location
Spatiel analyse
- Select features in:
Vælg objekter i:
- that intersect features in:
som krydser objekter i:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Ændr nuværende selektion via:
+ Ændr nuværende selektion via:
Use selected features only
- Brug kun valgte objekter
+ Brug kun valgte objekter
Please specify select layer
@@ -3110,7 +3084,7 @@ geometry column - column with unique integer values
FieldsCalculatorDialog
[Save to temporary file]
-
Save file
@@ -3408,7 +3382,7 @@ Dette plugin vil ikke være aktiveret.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4724,7 +4698,7 @@ når der trykkes på værktøjsdialogens hjælpeknap.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Til eksponering af et datasæt med 1 bånd med en farvetabel som et datasæt med 3 (RGB) eller 4 (RGBA) bånd.
Nyttig til outputdrivere såsom JPEG, JPEG2000, MrSID, ECW, som ikke understøtter farveindekserede datasæt.
@@ -5437,7 +5411,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Add generated file to map
-
MainWindow
- &Edit
&Rediger
@@ -5541,157 +5515,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Vælg
- Measure
Mål
- &Decorations
&Dekorationer
- &Layer
&Lag
- New
Ny
- &Plugins
&Plugins
- &Help
&Hjælp
- &Settings
&Indstillinger
- &Raster
&Raster
- Vect&or
Vekt&or
- &OpenStreetMap
&OpenStreetMap
- File
Fil
- Manage Layers
Administrér lag
- Digitizing
Digitalisering
- Advanced Digitizing
Avanceret digitalisering
- Map Navigation
Kortnavigation
- Attributes
Attributter
- Plugins
Plugins
- Help
Hjælp
- Raster
Raster
- Label
Label
- Vector
Vektor
- Database
Database
- Web
Web
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Crtl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Gem som billede...
- &New Print Composer
&Nyt printlayout
- Ctrl+P
Ctrl+P
- Composer Manager...
Layoutstyring...
@@ -5711,948 +5685,940 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Ny fra skabelon
- Preview Mode
-
- Paste Features as
Indsæt objekter som
- &New
&Ny
- &Open...
&Åbn...
- &Save
&Gem
- Save &As...
Gem &som...
- Exit QGIS
Afslut QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
&Fortryd
- Ctrl+Z
Ctrl+Z
- &Redo
&Gentag
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Beskær objekter
- Ctrl+X
Ctrl+X
- Copy Features
Kopiér objekter
- Ctrl+C
Ctrl+C
- Paste Features
Indsæt objekter
- Ctrl+V
Ctrl+V
- Add Feature
Tilføj objekt
- Ctrl+.
Ctrl+.
- Move Feature(s)
Flyt objekt(er)
- Reshape Features
Omform objekter
- Split Features
Opdel objekter
- Split Parts
Opdel elementer
- Delete Selected
Slet valgte
- Add Ring
Tilføj ring
- Add Part
Tilføj part
- Simplify Feature
Forenkl objekt
- Delete Ring
Slet ring
- Delete Part
Slet part
- Merge Selected Features
Flet valgte objekter
- Merge Attributes of Selected Features
Flet attributter for valgte objekter
- Node Tool
Knudeværktøj
- Rotate Point Symbols
Rotér punktsymboler
- Snapping Options...
Snap-muligheder...
- Pan Map
Flyt kort
- Zoom In
Zoom ind
- Ctrl++
Ctrol++
- Zoom Out
Zoom ud
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Vælg enkelt objekt
+ Vælg enkelt objekt
+ Select Features by Rectangle
- Vælg objekter med rektangel
+ Vælg objekter med rektangel
- Select Features by Polygon
Vælg objekter med polygon
- Select Features by Freehand
Vælg objekter med frihånd
- Select Features by Radius
Vælg objekter med cirkel
- Deselect Features from All Layers
Fjern valg af objekter fra alle lag
- Identify Features
Identificér objekter
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Mål linje
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Mål areal
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Mål vinkel
- Zoom Full
Fuld zoom
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Zoom til lagomrids
- Zoom to Selection
Zoom til selektion
- Ctrl+J
Ctrl+J
- Zoom Last
Zoom forrige
- Zoom Next
Zoom næste
- Zoom Actual Size
Zoom til aktuel størrelse
- Zoom to Native Pixel Resolution
Zoom til den oprindelige pixelopløsning
- Map Tips
Kort-tips
- Show information about a feature when the mouse is hovered over it
Vis information om et objekter, når musen trækkes over det
- New Bookmark...
Nyt bogmærke...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Vis bogmærker
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Gentegn
- Text Annotation
Tekstnote på kort
- Form Annotation
Formnote på kort
- Move Annotation
Flyt note på kort
- Labeling
Labelværktøj
- Layer Labeling Options
Indstillinger for labelværktøj
- New Shapefile Layer...
Nyt Shapefil-lag...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Nyt SpatiLite lag...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Raster-beregner...
- Add Vector Layer...
Tilføj vektorlag...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Tilføj rasterlag...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Tilføj PostGIS-lag...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Tilføj SpatiaLite-lag...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Tilføj MSSQL Spatial-lag...
- Add Oracle Spatial Layer...
Tilføj Oracle Spatial-lag...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Tilføj WMS/WMTS-lag...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Åbn attribut tabel
- Toggle Editing
Slå redigering til/fra
- Toggles the editing state of the current layer
Slår redigering af det valgte lag til og fra
- Save for Selected Layer(s)
Gem for valgte lag
- Save edits to current layer, but continue editing
Gem redigeringer i det valgte lag, men fortsæt redigering
- Save As...
Gem som...
- Add from Layer Definition File...
Tilføj fra Lag Definitions Fil...
- Save As Layer Definition File...
Gem som Lag Definitions Fil...
- Normal
- Normal
+
- Normal preview mode
-
- Simulate Photocopy (Grayscale)
- Simulér Fotokopiering (Gråskala)
+
- Simulate photocopy (grayscale)
-
- Simulate Fax (Mono)
- Simulér Fax (Mono)
+
- Simulate fax (mono)
-
- Simulate Color Blindness (Protanope)
- Simulér Farveblindhed (Protanope)
+
- Simulate color blindness (protanope)
-
- Simulate Color Blindness (Deuteranope)
- Simulér Farblindhed (Deuteranope)
+
- Simulate color blindness (deuteranope)
-
- Set Scale Visibility of Layer(s)
-
- Remove Layer(s)
Fjern lag
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Vælg projektion af lag
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Sæt projekt-CRS ud fra laget
- Properties...
Egenskaber...
- Query...
Forespørgsel...
- Add to Overview
Tilføj til oversigt
- Add All to Overview
Tilføj alt til oversigt
- Remove All from Overview
Fjern alle fra oversigt
- Show All Layers
Vis alle lag
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Skjul alle lag
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Administrér og installér plugins...
- Open Field Calculator
Åbn Feltberegner
- Add Delimited Text Layer...
Tilføj afgrænset-tekst-lag...
- Add Delimited Text Layer
Tilføj afgrænset-tekst-lag
- New Vector Layer
Nyt vektorlag
- Paste features in clipboard into a new OGR vector layer.
Kopiér objekter fra udklipsholder til et nyt OGR baseret vektorlag.
- New Memory Vector Layer
Nyt memory-vektorlag
- Paste features in clipboard into a new memory vector layer.
Kopiér objekter fra udklipsholder til et nyt memory-vektorlag.
- Toggle Full Screen Mode
Slå fuld skærm til/fra
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Projektegenskaber...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Generelle indstillinger...
- Custom CRS...
Brugerdefineret CRS...
- Configure shortcuts...
Konfigurér genvejstaster...
- Local Histogram Stretch
Lokal histogram-stræk
- Stretch histogram of active raster to view extents
Stræk-histogram af aktiv raster til kortudsnit
- Help Contents
Indhold i hjælp
- F1
F1
- API documentation
API-dokumentation
- QGIS Home Page
QGIS' hjemmeside
- Ctrl+H
Ctrl+H
- Check QGIS Version
Tjek QGIS-version
- Check if your QGIS version is up to date (requires internet access)
Kontrollér, om QGIS er opdateret (kræver internetforbindelse)
- About
Om
- QGIS Sponsors
QGIS' sponsorer
- Move Label
Flyt label
- Rotate Label
Rotér label
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Rotér label
Ctrl (Cmd) forøger med 15 grd.
- Change Label
Skift label
- Style Manager...
Stilartstyring...
- Python Console
Python-konsol
- Full histogram stretch
Fuldt histogram-stræk
- Stretch Histogram to Full Dataset
Stræk-histogram til fuldt datasæt
- Customization...
Brugerdefineret tilpasning...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Det er her bare for at undgå genvejstast-konflikter, genvejstasten er i QgsCustomization
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Indlejr lag og grupper...
- Embed layers and groups from other project files
Indlejr lag og grupper fra en anden projektfil
- &Copyright Label
&Copyright-label
- Creates a copyright label that is displayed on the map canvas.
Opretter en copyright-label, der vises på kortet.
- &North Arrow
&Nordpil
- "Creates a north arrow that is displayed on the map canvas"
"Opretter en nordpil, der vises på kortet"
- &Scale Bar
&Målestok
- Creates a scale bar that is displayed on the map canvas
Opretter en målestok, der vises på kortet
- Add WFS Layer...
Tilføj WFS-lag...
- Add WFS Layer
Tilføj WFS-lag
- Feature Action
objekthandling
- Run Feature Action
Kør objekthandling
- Pan Map to Selection
Zoom til selektion
- Touch zoom and pan
Berør, zoom og panorér
- Offset Curve
Forskydning kurve
- Copy style
Kopiér stilart
- Paste style
Indsæt stilart
- Add WCS Layer...
Tilføj WCS-lag...
- &Grid
&Gitter
- Grid
Gitter
- Pin/Unpin Labels
Fastgør/frigør labels
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6663,44 +6629,44 @@ Shift frigør, Ctrl (Cmd) skifter status
Virker på alle redigerbare lag
- Highlight Pinned Labels
Fremhæv fastgjorte labels
- New Blank Project
Nyt blankt projekt
- Local Cumulative Cut Stretch
Lokal samlet beskæringsstræk
- Local cumulative cut stretch using current extent, default limits and estimated values.
Lokal samlet beskæringsstræk vha. nuværende omrids, standardgrænser og estimerede værdier.
- Full Dataset Cumulative Cut Stretch
Samlet beskæringsstræk vha. fuldt datasæt
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Samlet beskæringsstræk vha. fuldt datasæt-omrids, standardgrænser og estimerede værdier.
- Show/Hide Labels
Vis/skjul labels
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6711,128 +6677,128 @@ Shift+klik eller markér for at skjule den
Virker på det aktuelle redigérbare lag
- Html Annotation
HTML-annotation
- Duplicate Layer(s)
Dublér lag
- SVG annotation
SVG-anmærkning
- Save for All Layers
Gem for alle lag
- Rollback for All Layers
Rul tilbage for alle lag
- Cancel for All Layers
Annuller for alle lag
- Rollback for Selected Layer(s)
Rul tilbage for valgte lag
- Current Edits
Aktuelle redigeringer
- Cancel for Selected Layer(s)
Annuller for valgte lag
- Save Layer Edits
Gem lagredigeringer
- Rotate Feature(s)
Rotér objekt(er)
- &Download data
&Download data
- &Import topology from XML
&Importér topologi fra XML
- &Export topology to SpatiaLite
&Eksportér topologi til SpatiaLite
- Increase brightness
Forøg lysstyrke
- Decrease brightness
Formindst lysstyrke
- Increase contrast
Forøg kontrast
- Decrease contrast
Formindsk kontrast
- Select By Expression
Vælg fra udtryk
- Select features using an expression
Vælg objekter vha. et udtryk
- Need commercial support?
Brug for erhvervsmæssig support?
- DXF Export...
DXF eksport...
- Fill Ring
Udfyld Ring
@@ -6842,76 +6808,76 @@ Virker på det aktuelle redigérbare lag
Manage connections
- Adminstrér forbindelser
+
Save to file
- Gem til fil
+
Browse
- Gennemse
+
Load from file
- Indlæs fra fil
+
Load
- Indlæs
+
Save
- Gem
+
eXtensible Markup Language (*.xml *.XML)
-
Save connections
- Gem forbindelser
+
Load connections
- Indlæs forbindelser
+
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
-
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -6919,307 +6885,307 @@ Virker på det aktuelle redigérbare lag
MetaSearch
-
Search
- Søg
+
Find
-
Set global
-
Map extent
-
-180
-
90
- 90
+
Records
-
-90
-
180
- 180
+
From
-
Keywords
- Nøgleord
+
Results
- Resultater
+
>
- >
+
<<
-
Add WCS
-
Add WMS/WMTS
-
<
- <
+
Add WFS
-
Abstract
-
Double click to see full record information
-
Type
- Type
+
Title
- Titel
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
-
Edit
- Redigér
+
Delete
- Slet
+
Save
- Gem
+
Add default services
-
Load
- Indlæs
+
Settings
- Indstillinger
+
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
- Indlæser forbindelser
+
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
@@ -7278,11 +7244,6 @@ Virker på det aktuelle redigérbare lag
Can't save model
Kan ikke gemme model
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
Model indeholder ingen algoritmer og/eller parametre og kan ikke udføres
@@ -7310,7 +7271,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- Den valgte model kunne ikke indlæses.
+ Den valgte model kunne ikke indlæses.
Forkert linje %s
@@ -7338,29 +7299,29 @@ Forkert linje %s
Create a new Catalogue connection
-
Name
- Navn
+
URL
- URL
+
Save connection
- Gem forbindelse
+
Both Name and URL must be provided
-
Overwrite %s?
-
@@ -7483,27 +7444,27 @@ Forkert linje %s
OutputSelectionPanel
[Save to temporary file]
-
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
- Gem fil
+
Select directory
- Vælg mappe
+
@@ -8164,22 +8125,22 @@ Forkert linje %s
Vurderer normale derivater...
- minidump written to %1
minidump skrevet til %1
- writing of minidump to %1 failed (%2)
skrivning af minidump til %1 mislykkedes (%2)
- creation of minidump to %1 failed (%2)
oprettelse af minidump til %1 mislykkedes (%2)
- Crash dumped
Alvorlig programfejl
@@ -8331,6 +8292,7 @@ Error(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
Dannet CRS
@@ -8495,85 +8457,85 @@ Error(%2): %3
Kan ikke konvertere '%1' til Interval
- Cannot convert '%1' to boolean
Kan ikke konvertere '%1' to boolsk
- Domain max must be greater than domain min
Domænemaksimum skal være større end domæneminimum
- Exponent must be greater than 0
Eksponent skal være større end 0
- Invalid regular expression '%1': %2
Ugyldigt regulært udtryk '%1': %2
- Index is out of range
Indeks er udenfor interval
- Cannot convert '%1:%2:%3' to color
Kan ikke konvertere '%1:%2:%3' til farve
- Cannot convert '%1:%2:%3:%4' to color
Kan ikke konvertere '%1:%2:%3:%4' til farve
- "%1" is not a valid color ramp
"%1" er ikke en gyldig farveskala
- Cannot convert '%1:%2:%3:%4:%5' to color
Kan ikke konvertere '%1:%2:%3:%4:%5' til farve
- function help for %1 missing
hjælp til funktion %1 mangler
- Operators
Operatorer
- Fields and Values
Felter og værdier
- Math
Matematik
- Conversions
Konverteringer
- Conditionals
Betingede
@@ -8620,58 +8582,58 @@ Error(%2): %3
år|år
- Date and Time
Dato og tid
- String
Streng
- Color
Farve
- Geometry
Geometri
- Record
Post
- No root node! Parsing failed?
Ingen rodknude! Fortolkning mislykkedes?
- (no root)
(ingen rod)
- Unary minus only for numeric values.
Unært minus kun til numeriske værdier.
- Can't preform /, *, or % on DateTime and Interval
Kan ikke udføre /, *, or % på DateTime og Interval
- [unsupported type;%1; value:%2]
[ikke understøttet type;%1; værdi:%2]
- Column '%1' not found
Kolonne '%1' ikke fundet
@@ -8759,10 +8721,7 @@ Error(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- linje %1 indeholder %n dubleret knude ved %2
- linje %1 indeholder %n dublerede knuder ved %2
-
+ linje %1 indeholder %n dubleret knude ved %2 linje %1 indeholder %n dublerede knuder ved %2
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Inverted polygons
-
Version 0.1
@@ -9886,6 +9846,7 @@ Hvis til stede, vil dette URI indsættes som schema location. Bemærk, at schema
Layers
Lag
@@ -10463,12 +10424,14 @@ Hvis til stede, vil dette URI indsættes som schema location. Bemærk, at schema
Shapefil til PostgreSQL/PostGIS-importværktøj
+ SQL Anywhere plugin
- SQL Anywhere plugin
+ SQL Anywhere plugin
+ Store vector layers within a SQL Anywhere database
- Gem vektorlag i en SQL Anywhere-database
+ Gem vektorlag i en SQL Anywhere-database
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS kunne ikke finde din GRASS-installation.
Vil du angive stien (GISBASE) til din GRASS-installation?
@@ -10587,7 +10550,7 @@ Vil du angive stien (GISBASE) til din GRASS-installation?
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
OpenFileGDB
-
GeoPackage
-
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Kunne ikke oprette fil %1.qpj
- Fetching features failed.
SQL:%1
Error: %2
@@ -10918,7 +10881,7 @@ SQL:%1
Fejl: %2
- Oracle
Oracle
@@ -11381,12 +11344,14 @@ SQL: %1
multipart objekt
+ Error describing bind parameters
- Fejl ved beskrivelse af bindparametre
+ Fejl ved beskrivelse af bindparametre
+ Error binding parameters
- Fejl ved binding af parametre
+ Fejl ved binding af parametre
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- Tegnforklaring
+
QSpatiaLiteDriver
- Error opening database
Fejl ved åbning af database
- Error closing database
Fejl ved lukning af database
- Unable to begin transaction
Kan ikke starte transaktion
- Unable to commit transaction
Kan ikke gemme transaktion (commit)
- Unable to rollback transaction
Kan ikke fortryde transaktion (rollback)
@@ -11591,27 +11551,27 @@ Svar var:
Ingen forespørgsel
- Unable to execute statement
Kan ikke eksekvere udtryk
- Unable to execute multiple statements at a time
Kan ikke eksekvere flere udtryk på én gang
- Unable to reset statement
Kan ikke nulstille udtryk
- Unable to bind parameters
Kan ikke binde parametre
- Parameter count mismatch
Parameterantal passer ikke
@@ -11788,61 +11748,61 @@ Svar var:
QGIS er klar!
- Minimize
Minimér
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Minimerer det aktive vindue til docken
- Zoom
Zoom
- Toggles between a predefined size and the window size set by the user
Skifter mellem en prædefineret størrelse og vinduestørrelsen angivet af brugeren
- Bring All to Front
Bring alt forrest
- Bring forward all open windows
Bring alle åbne vinduer frem
- Current Edits
Aktuelle redigeringer
- Error
Fejl
- Failed to open Python console:
Kunne ikke åbne Python-konsol:
@@ -11865,138 +11825,138 @@ Kontakt udviklerne af programmet.
QGIS - %1 ('%2')
- Panels
Paneler
- Toolbars
Værktøjslinier
- Window
Vindue
- &Database
&Database
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
Statuslinje, som viser status på udtegning af lag og andre tidskrævende operationer
- Toggle extents and mouse position display
Slå visning af omrids og museposition til
- Coordinate:
Koordinat:
- Current map coordinate
Nuværende kortkoordinat
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Viser kortkoordinatet på den nuværende markørposition. Visningen bliver løbende opdateret, som musen bevæges. Det tillader også flytning af kanvassets centrum til en given position. Formatet er brd,læg eller øst, nord
- Current map coordinate (lat,lon or east,north)
Nuværende kortkoordinat (brd, læn eller øst, nord)
- Scale
Målforhold
- Current map scale
Nuværende målforhold
- Displays the current map scale
Viser det aktuelle målforhold
- Current map scale (formatted as x:y)
Aktuelt målforhold (formatteret som x:y)
- Render
Udtegn
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Ved markering udtegnes kortlagene i henhold til kortnavigation og andre handlinger. Når markering fjernes udtegnes kortet ikke. Det giver dig mulighed for at tilføje mange lag og symbolisere dem før udtegning.
- Toggle map rendering
Slå kortudtegning til
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Dette ikon viser, om on-the-fly-koordinatsystems-transformation er slået til eller ej. Klik på ikonet for at åbne dialogen projektegenskaber for at ændre dette.
- CRS status - Click to open coordinate reference system dialog
CRS-status - Klik for at åbne dialogen koordinatsystemer
- Ready
Klar
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Kortoversigtskanvas. Dette kanvas kan bruges til at vise et positionskort, som viser det aktuelle omrids af kortkanvasset. Det aktuelle omrids vises som en rød rektangel. Alle lag på kortet kan tilføjes til oversigtskanvasset.
- Overview
Oversigt
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Oversigt, som viser alle nuværende lag på kortkanvasset. Klik på afkrydsningsfeltet for at slå et lag til og fra. Dobbeltklik på et lag i oversigten for at tilpasse dets visning og sætte andre egenskaber.
- Layers
Lag
- Map layer list that displays all layers in drawing order.
Liste over kortlag, som viser alle lag i tegningsrækkefølge.
- Layer order
Lagrækkefølge
@@ -12006,394 +11966,388 @@ Kontakt udviklerne af programmet.
Privat qgis.db
- < Blank >
< Tom >
- QGIS version
QGIS-version
- QGIS code revision
QGIS-koderevision
- Compiled against Qt
Kompileret mod Qt
- Running against Qt
Kører mod Qt
- Compiled against GDAL/OGR
Kompileret mod GDAL/OGR
- Running against GDAL/OGR
Kører mod GDAL/OGR
- PostgreSQL Client Version
PostgreSQL-klientversion
- No support.
Ingen understøttelse.
- SpatiaLite Version
SpatiaLite-version
- QWT Version
QWT-version
- PROJ.4 Version
PROJ.4-version
- QScintilla2 Version
QScintilla2-version
- This copy of QGIS writes debugging output.
Denne kopi af QGIS skriver fejlsøgningsoutput.
- %1 doesn't have any layers
%1 har ikke nogen lag
- Invalid Data Source
Ugyldig datakilde
- %1 is not a valid or recognized data source
%1 er ikke en gyldig eller genkendt datakilde
- Vector
Vektor
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Kan ikke hente PostgreSQL-udvælgelsesdialog fra udbyder.
- %1 is an invalid layer - not loaded
%1 er et ugyldigt lag - ikke indlæst
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 er et ugyldigt lag og kan ikke indlæses. Tjek <a href="#messageLog">beskedloggen</a> for yderligere information.
- QGIS files
QGIS-filer
- No legend entries selected
Ingen signaturer valgt
- Select the layers and groups you want to remove in the legend.
Vælg de lag og grupper du ønsker at fjerne fra signaturforklaringen
- Remove layers and groups
Fjern lag og grupper
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
%1 (%2 type ikke understøttet)
- http://qgis.org/en/site/forusers/commercial_support.html
-
- Do you want to save the current project? %1
Vil du gemme det aktuelle projekt? %1
- Invalid Layer
Ugyldigt lag
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Kan ikke hente SpatiaLite udvælgelsesdialog fra udbyder.
- Delimited Text
Afgrænset tekst
- Cannot get Delimited Text select dialog from provider.
Kan ikke hente Afgrænset tekst-dialog fra udbyder.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Kan ikke hente MSSQL-udvælgelsesdialog fra udbyder.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Kan ikke hente Oracle-udvælgelsesdialog fra udbyder.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Kan ikke hente WMS-udvælgelsesdialog fra udbyderen.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Kan ikke hente WCS-udvælgelsesdialog fra udbyderen.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Kan ikke hente WFS-udvælgelsesdialog fra udbyderen.
- Default failed to open: %1
Standard kunne ikke åbnes: %1
- Default not found: %1
Standard ikke fundet: %1
- Open Template Project
Åbn skabelonprojekt
- Auto-open Project
Auto-åbn projekt
- Failed to open: %1
Kunne ikke åbne: %1
- Not valid project file: %1
Ugyldig projektfil: %1
- Project failed to open: %1
Projekt kunne ikke åbnes: %1
- Default template has been reopened: %1
Standardskabelon er blevet genåbnet: %1
- File not found: %1
Fil ikke fundet: %1
- Calculating...
Beregner...
- Abort...
Afbryd...
- Choose a QGIS project file to open
Vælg en QGIS-projektfil
- Loading project: %1
Indlæser projekt: %1
- Unable to open project
Kan ikke åbne projekt
- Security warning
Sikkerhedsadvarsel
- project macros have been disabled.
projektmakroer er slået fra.
- Enable macros
Slå makroer til
- Project loaded
Projekt indlæst
- Choose a QGIS project file
Vælg en QGIS-projektfil
- Saved project to: %1
Gemte projekt til: %1
- Unable to save project %1
Kan ikke gemme projekt %1
- Choose a file name to save the QGIS project file as
Vælg et filnavn til QGIS-projektfilen
- Unable to load %1
Kan ikke indlæse %1
- Choose a file name to save the map image as
Vælg et filnavn til kortbilledet
- Saved map image to %1
Gemte kortbillede til %1
- Default system font substituted.
Standard systemfont for substituerede.
- Labeling
Labelværktøj
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
Font til lag <b><u>%1</u></b> blev ikke fundet (<i>%2</i>). %3
- Open labeling dialog
Åbn labelværktøj
@@ -12416,72 +12370,72 @@ Kontakt udviklerne af programmet.
Classification
- Klassificering
+
Range
- Interval
+
Unique Values
-
File Name
- Filnavn
+
Value Map
-
Enumeration
- Optælling
+
Hidden
- Skjult
+
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
- Foto
+
Web View
-
Color
- Farve
+
Date/Time
-
- Compiled against GEOS
Kompileret mod GEOS
- Running against GEOS
Kører mod GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
Generering af lag fejlede. Tjek <a href="#messageLog">beskedloggen</a> for yderligere information.
- Insufficient permissions
Utilstrækkelige tilladelser
- The project file is not writable.
Projektfil er ikke skrivbar
- DXF export completed
DXF eksport er afsluttet
- DXF export failed
DXF eksport fejlede
- Commit errors
Commit-fejl
- Could not commit changes to layer %1
Kunne ikke gemme ændringer til lag %1
- Errors: %1
Fejl: %1
- Show more
Vis mere
- Labeling Options
Labelmuligheder
- Please select a vector layer first
Vælg et vektorlag først
- Layer labeling settings
Indstillinger for laglabels
- Reading raster
Læser raster
- Cannot write raster error code: %1
Kan ikke skrive raster-fejlkode: %1
- Saving done
Gemning fuldført
- Export to vector file has been completed
Eksport til vektorfil er gennemført
- Save error
Fejl ved gemning
- Export to vector file failed.
Error: %1
Eksport til vektorfil mislykkedes.
Fejl: %1
- No Layer Selected
Intet lag valgt
- To delete features, you must select a vector layer in the legend
For at slette objekter skal du vælge et vektorlag i oversigten
- No Vector Layer Selected
Intet vektorlag valgt
- Deleting features only works on vector layers
Sletning af objekter virker kun på vektorlag
- Provider does not support deletion
Udbyder understøtter ikke sletning
- Data provider does not support deleting features
Dataudbyder understøtter ikke sletning af objekter
- Layer not editable
Lag kan ikke redigeres
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Det aktuelle lag kan ikke redigeres. Vælg 'Start redigering' værktøjslinjen Digitalisering.
- No Features Selected
Ingen objekter valgt
- The current layer has not selected features
Aktuelt lag har ingen valgte objekter
- Delete features
Slet objekter
- Delete %n feature(s)?
number of features to delete
-
- Slet %n objekt?
- Slet %n objekter?
-
+ Slet %n objekt? Slet %n objekter?
- Features deleted
Objekter slettet
- Problem deleting features
Der var et problem med at slette objekter
- A problem occured during deletion of features
Et problem opstod ved sletning af objekter
- %n feature(s) deleted.
number of features deleted
-
- %n objekt(er) slettet.
- %n objekter slettet.
-
+ %n objekt(er) slettet. %n objekter slettet.
- Merging features...
Sammenlægger objekter...
- Abort
Afbryd
- Create unique print composer title
Opret unik titel til printlayout
- (title generated if left empty)
(autogenereres hvis tom)
- Composer title
Titel på layout
- Title can not be empty!
Titel kan ikke være tom!
- Title already exists!
Titel findes allerede!
- Composer %1
Layout %1
- copy
kopi
- No active layer
Intet aktivt lag
- No active layer found. Please select a layer in the layer list
Intet aktivt lag fundet. Vælg et lag i laglisten
- Active layer is not vector
Aktivt lag er ikke vektor
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Værktøjet til fletning af objekter virker kun på vektorlag. Vælg et vektorlag i laglisten
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Fletning af objekter kan kun gøres for lag i redigeringstilstand. Gå til Lag->Slå redigering til/fra for at bruge sammenlægningsværktøjet
- Not enough features selected
Ikke nok objekter valgt
- The merge tool requires at least two selected features
Fletteværktøjet kræver mindst 2 valgte objekter
- Merged feature attributes
Flettede objektattributter
- Merge failed
Fletning mislykkedes
- An error occured during the merge operation
Der opstod en fejl ved fletningen
- Union operation canceled
Foreningshandling afbrudt
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
Foreningshandlingen ville resultere i en geometritype, som ikke er kompatibel med det nuværende lag, og er derfor afbrudt
- Merged features
Flettede objekter
- No active vector layer
Intet aktivt vektorlag
- To select features, choose a vector layer in the legend
Vælg et vektorlag i tegnforklaringen for at vælge objekter
- Features cut
Objekter klippet
- Features pasted
Objekter indsat
- Paste features
Indsæt objekter
- no features could be successfully pasted.
ingen objekter kunne gemmes
- %1 features were successfully pasted.
%1 objekter blev gemt
- %1 of %2 features could be successfully pasted.
%1 af %2 objekter blev gemt.
- Pasted
Indsat
- New memory layer name
Navn for nyt memory-vektorlag
- Layer name
Lagnavn
- No features in clipboard.
Ingen objekter i udklipsholder.
- No features with geometry found, point type layer will be created.
Ingen objekter indeholdende geometrier fundet; punkt vektorlag oprettes.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Objekter med forskellige typer goemetri fundet; objekter der ikke har geometri type %1 bliver oprettet uden geometri.
- Cannot create new layer
Kan ikke oprette nyt lag
- Cannot create field %1 (%2,%3)
Kan ikke oprette felt %1 (%2,%3)
- Cannot copy style: %1
Kan ikke kopiere stilart: %1
- Cannot parse style: %1:%2:%3
Kan ikke fortolke stilart: %1:%2:%3
- Cannot read style: %1
Kan ikke læse stilart: %1
- Start editing failed
Start af redigering mislykkedes
- Provider cannot be opened for editing
Udbyder kan ikke åbnes til redigering
- Stop editing
Stop redigering
- Do you want to save the changes to layer %1?
Vil du gemme ændringerne til lag %1?
- Problems during roll back
Problemer med tilbagerulning
- Could not %1 changes to layer %2
Errors: %3
@@ -12950,343 +12898,340 @@ Fejl: %3
- rollback
rollback
- cancel
annuller
- Save
Gem
- all
alle
- Rollback
Rollback
- Cancel
Afbryd
- Current edits
Aktuelle redigeringer
- %1 current changes for %2 layer(s)?
%1 aktueller ændringer til %2 lag?
- copy
kopiér
- Plugin layer
Pluginlag
- Memory layer
Hukommelseslag
- Duplicate layer:
Dubleret lag:
- %1 (duplication resulted in invalid layer)
%1 (dublering resulterede i ugyldigt lag)
- Set scale visibility for selected layers
-
- Couldn't load Python support library: %1
Kunne ikke indlæse bibliotek til Python-understøttelse:%1
- Couldn't resolve python support library's instance() symbol.
Kunne ikke henføre til Python-supportbibliotekets instance()-symbol.
- Python support ENABLED :-)
Python-understøttelse SLÅET TIL :-)
- There is a new version of QGIS available
Der er en ny version af QGIS tilgængelig
- You are running a development version of QGIS
Du kører med en udviklerversion af QGIS
- You are running the current version of QGIS
Dette er den aktueller version af QGIS
- Would you like more information?
Ønsker du mere information?
- QGIS Version Information
QGIS-versionsinformation
- QGIS - Changes since last release
QGIS - Ændringer siden sidste version
- Unable to get current version information from server
Kan ikke hente aktuel versionsinformation fra server
- Connection refused - server may be down
Forbindelse nægtet - server kan være nede
- QGIS server was not found
QGIS-server kunne ikke findes
- Unknown network socket error: %1
Ukendt socketfejl på netværket: %1
- Unable to communicate with QGIS Version server
%1
Kan ikke kommunikere med QGIS' versionsserver
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
For at udføre en fuld histogram-strækning, er du nødt til at have valgt et rasterlag.
- To change brightness or contrast, you need to have a raster layer selected.
For at ændre lysstyrke eller kontrast er du nødt til at have valgt et rasterlag.
- en
documentation language
en
- Layer is not valid
Lag er ikke gyldigt
- The layer %1 is not a valid layer and can not be added to the map
Laget %1 er ikke et gyldigt lag og kan ikke tilføjes til kortet
- The layer is not a valid layer and can not be added to the map
Laget er ikke et gyldigt lag og kan tilføjes til kortet
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Projekt har lag i redigeringstilstand med ugemte ændringer, som IKKE vil blive gemt!
- Save?
Gem?
- Current CRS: %1 (OTFR enabled)
Aktuelt CRS: %1 (OTFR slået til)
- Current CRS: %1 (OTFR disabled)
Aktuelt CRS: %1 (OTFR slået fra)
- Map coordinates for the current view extents
Kortkoordinater for den aktuelle visnings omrids
- Map coordinates at mouse cursor position
Kortkoordinater på musemarkørs position
- Extents:
Omrids:
- Maptips require an active layer
Korttips kræver et aktivt lag
- %n feature(s) selected on layer %1.
number of selected features
-
- %n objekt valgt på lag %1.
- %n objekter valgt på lag %1.
-
+ %n objekt valgt på lag %1. %n objekter valgt på lag %1.
- Open a GDAL Supported Raster Data Source
Åbn en GDAL-understøttet raster-datakilde
- Error adding valid layer to map canvas
Fejl ved tilføjelse af gyldigt lag til kortkanvas
- Raster layer
Rasterlag
- %1 is not a supported raster data source
%1 er ikke en understøttet datakilde
- Unsupported Data Source
Ikke understøttet dataformat
- Exit QGIS
Afslut QGIS
- Do you really want to quit QGIS?
Vil du afslutte QGIS ?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Denne projektfil blev gemt i en ældre version af QGIS. Når denne projektfil gemmes, vil QGIS opdatere den til den nyeste version, som muligvis kan gøre den ubrugelig for ældre versioner af QGIS. <p>Selv om QGIS-udviklerne prøver at bibeholde bagudkompatibilitet, kan nogle af informationerne fra den gamle projektfil gå tabt. For at forbedre kvaliteten af QGIS, vil vi værdsætte, hvis du opretter en fejlrapport på %3. Husk at inkludere den gamle projektfil og angiv den version af QGIS, som du brugte til at opdage fejlen.<p>For at fjerne denne advarsel, når en gammel projektfil åbnes, afmarkér boksen '%5' i %4-menuen.<p>Version af projektfilen: %1<br>Aktuel version af QGIS: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Indstillinger:Generelle indstillinger:Generelt</tt>
- Warn me when opening a project file saved with an older version of QGIS
Advar mig ved åbning af projektfil, der er gemt i en ældre version af QGIS
- Project file is older
Projektfil er ældre
- This project file was saved by an older version of QGIS
Denne projektfil blev gemt af en ældre version af QGIS
- Please check the <a href="#messageLog">message log</a> for further info.
Tjek <a href="#messageLog">beskedloggen</a> for yderligere information
- A network request timed out, any data received is likely incomplete.
-
- Warning
Advarsel
- This layer doesn't have a properties dialog.
Dette lag har ikke en egenskabsdialog.
- Authentication required
Godkendelse påkrævet
- Proxy authentication required
Proxygodkendelse påkrævet
- SSL errors occured accessing URL %1:
SSL-fejl opstod ved tilgang til URL %1:
-
Always ignore these errors?
@@ -13295,13 +13240,10 @@ Always ignore these errors?
Ignorér altid disse fejl?
- %n SSL errors occured
number of errors
-
- %n SSL-fejl opstod
- %n SSL-fejl opstod
-
+ %n SSL-fejl opstod %n SSL-fejl opstod
@@ -13333,7 +13275,7 @@ Ignorér altid disse fejl?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13594,7 +13536,7 @@ p, li { white-space: pre-wrap; }
&Expand All
-
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Duplicate
- &Dublér
+
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As...
- Gem som...
+
Save As Layer Definition File...
- Gem som Lag Definitions Fil...
+
&Filter...
-
&Properties
-
Copy Style
-
Paste Style
-
QgsApplication
- Exception
Undtagelse
- unknown exception
ukendt undtagelse
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13720,7 +13662,7 @@ Bruger-DB-sti: %9
-
match indentation of application state
@@ -13728,24 +13670,24 @@ Bruger-DB-sti: %9
- [ERROR] Can not make qgis.db private copy
[FEJL] Kan ikke lave privat kopi af qgis.db
- Could not open qgis.db
Kunne ikke åbne qgis.db
- Migration of private qgis.db failed.
%1
Migrering af privat qgis.db mislykkedes.
%1
- Update of view in private qgis.db failed.
%1
Opdatering af view i privat qgis.db mislykkedes.
@@ -13755,28 +13697,28 @@ Bruger-DB-sti: %9
QgsAtlasComposition
- Atlas filter eval error: %1
Atlas filter evalueringsfejl: %1
- Composer
Layout
- No matching atlas features
Ingen matchende atlas objekter
- Atlas feature %1 of %2
Atlas objekt %1 af %2
- Atlas filename evaluation error: %1
Fejl ved evaluering af Atlas filnavn: %1
@@ -13792,7 +13734,7 @@ Bruger-DB-sti: %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Kunne ikke sætte filnavns mønster som '%1'.
@@ -14159,7 +14101,7 @@ Parserfejl:
Attributes changed
-
@@ -14225,12 +14167,12 @@ Parserfejl:
Columns
- Kolonner
+
Reset
- Nulstil
+
mMainViewButtonGroup
-
=
- =
+
Update All
-
Attribute table - %1 (%n Feature(s))
feature count
-
- Attributtabel - %1 (%n objekt)
- Attributtabel - %1 (%n objekter)
-
+ Attributtabel - %1 (%n objekt) Attributtabel - %1 (%n objekter)
Update Filtered
-
Error
- Fejl
+
An error occured while evaluating the calculation string:
%1
- Der opstod en fejl ved evaluering af beregningsstrengen:
-%1
+
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Er du sikker på, at du vil slette %n bogmærke?
- Er du sikker på, at du vil slette %n bogmærker?
-
+ Er du sikker på, at du vil slette %n bogmærke? Er du sikker på, at du vil slette %n bogmærker?
Form
-
A calendar widget to enter a date.
-
Date format
-
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
Symbol
- Value
Værdi
- Label
Label
@@ -15273,49 +15208,49 @@ Database:%2
Avanceret
- Random colors
Tilfældige farver
- Symbol levels...
Symbolniveauer...
- High number of classes!
Højt antal klasser!
- Classification would yield %1 entries which might not be expected. Continue?
Klassificering ville give %1 artikler, som kunne være uventede. Fortsæt?
- Error
Fejl
- There are no available color ramps. You can add them in Style Manager.
Der er ikke nogen tilgængelige farveskalaer. Du kan tilføje dem i Stilartstyring.
- The selected color ramp is not available.
Den valgte farveskala er ikke tilgængelig.
- Confirm Delete
Bekræft sletning
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Klassificeringsfeltet blev ændret fra '%1' til '%2'.
Skal de eksisterende klasser slettes før klassificering?
@@ -15344,17 +15279,17 @@ Skal de eksisterende klasser slettes før klassificering?
Form
-
Representation for checked state
-
Representation for unchecked state
-
@@ -15373,24 +15308,19 @@ Skal de eksisterende klasser slettes før klassificering?
QgsColorButton
- Select Color
Vælg farve
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -15463,7 +15393,7 @@ Skal de eksisterende klasser slettes før klassificering?
Composer
Layout
@@ -15511,7 +15441,7 @@ Skal de eksisterende klasser slettes før klassificering?
Normal
- Normal
+
Simulate photocopy (grayscale)
-
Simulate fax (mono)
-
Simulate color blindness (Protanope)
-
Simulate color blindness (Deuteranope)
-
Set as atlas feature for %1
Makér som atlas objekt for %1
@@ -15660,7 +15590,7 @@ Skal de eksisterende klasser slettes før klassificering?
Choose a file name to save the map as
Vælg et filnavn at gemme kortet som
@@ -15671,15 +15601,15 @@ Skal de eksisterende klasser slettes før klassificering?
Empty filename pattern
Tomt filnavnsmønster
The filename pattern is empty. A default one will be used.
Filnavnsmønsteret er tomt. Standarden vil blive brugt.
@@ -15690,15 +15620,15 @@ Skal de eksisterende klasser slettes før klassificering?
Unable to write into the directory
Kan ikke skrive til mappen
The given output directory is not writable. Cancelling.
Den angivne outputmappe er ikke skrivbar. Afbryder.
@@ -15708,251 +15638,251 @@ Skal de eksisterende klasser slettes før klassificering?
Atlas processing error
Atlas-processeringsfejl
Feature filter parser error: %1
Fejl ved fortolkning af objektfilter: %1
Error creating %1.
Fejl ved oprettelse af %1
Rendering maps...
Udtegner kort...
Abort
Afbryd
- Big image
Stort billede
- To create image %1x%2 requires about %3 MB of memory. Proceed?
For at oprette et %1x%2-billede kræves ca. %3 MB hukommelse. Fortsæt?
- Choose a file name to save the map image as
Vælg et filnavn til kortbilledet
- Memory Allocation Error
Kunne ikke allokere hukommelse
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
At danne billede #%1( %2x%3 @ %4dpi ) kan resultere i hukommelsesoverflow.
Prøv en lavere opløsning eller en mindre papirstørrelse
- Image export error
Billede eksport fejl
- Directory where to save image files
Mappe, hvor billedfiler skal gemmes
- Image format:
Billedformat:
- SVG warning
SVG-advarsel
- Don't show this message again
Vis ikke denne besked igen
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>SVG-eksportfunktionen i QGIS har flere problemer pga fejl og mangler i
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4-SVG-koden. Der er specielt problemer med lag, som ikke beskæres til kortets omrids-boks.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Hvis du skal bruge en vektorbaseret outputfil fra QGIS, foreslås det, at du prøver at printe til PostScript, hvis SVG-outputtet ikke er tilfredsstillende.</p>
- SVG Format
SVG-format
- Directory where to save SVG files
Mappe, hvor SVG-filer skal gemmes
- SVG export error
SVG eksport fejl
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
kopiér
- Duplicating composer...
Dublerer layout...
- Duplicate Composer
Dublér layout
- Composer duplication failed.
Dublering af layout mislykkedes.
- Save template
Gem skabelon
- Composer templates
Layoutskabeloner
- Save error
Gemningsfejl
- Error, could not save file
Fejl, kunne ikke gemme fil
- Load template
Indlæs skabelon
- Read error
Læsefejl
- Error, could not read file
Fejl, kunne ikke læse fil
- Composer error
Layoutfejl
- Error, could not create new composer
Fejl, kunne ikke oprette nyt layout
- Loading template into composer...
Indlæser skabelon i layout...
- Project contains WMS layers
Projekt indeholder WMS-lag
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Nogle WMS-servere (fx UMN-kortserveren) har en begrænsning på BREDDE- og HØJDE-parameteren. Printing af lag fra sådanne servere kan overskride denne begrænsning. Hvis dette er tilfældet, vil WMS-laget ikke blive printet
- Project contains composition effects
Projekt indeholder kompositionseffekter
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Avancerede kompositionseffekter, såsom blandingstilstande eller vektorlagstransparens, er aktiveret i dette projekt, som ikke kan printes som vektorer. Det anbefales at printe som raster.
- Print as raster
Print som raster
- Landscape
Liggende
@@ -16089,32 +16019,32 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Center
-
Right
- Højre
+
Left
- Venstre
+
Attribute
- Attribut
+
Heading
-
Alignment
- Justering
+
@@ -16809,12 +16739,12 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Export Atlas as PDF...
-
Export Atlas as PDF
-
Left
- Venstre
+
Center
-
Right
- Højre
+
@@ -16985,12 +16915,12 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Ascending
- Stigende
+
Descending
- Faldende
+
@@ -17033,7 +16963,7 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Use smart breaks changed
-
@@ -17071,93 +17001,93 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
-
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
Rammefarve ændret
- Background color changed
Baggrundsfarve ændret
- Item position changed
Elementets position ændret
- Item outline width
Bredde på elements omrids
- Item frame join style
-
- Item frame toggled
Elementfarve ændret
- Item background toggled
Elementbaggrund ændret
- Select background color
Vælg baggrundsfarve
- Select frame color
Vælg rammefarve
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
Element-ID ændret
- Item rotation changed
Elementets rotation ændret
@@ -17170,115 +17100,104 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Globale muligheder
- Position and size
Position og størrelse
- Reference point
Referencepunkt
- X
X
- Y
Y
- Width
Bredde
- Height
Højde
- Page
Side
- ...
- ...
-
-
- Rotation
Rotation
- °
°
- Frame
Ramme
- mm
mm
- Join style
- Join-stilart
+
- Rendering
Udtegning
- Blending mode
Blandingstilstand
- Thickness
Linjebredde
- Color...
Farve...
- Background
Baggrund
- Transparency
Transparens
- Item ID
Element-ID
- Id
ID
@@ -17311,18 +17230,18 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Labelfarve ændret
- Insert expression
Indsæt udtryk
- Label alignment changed
Labeltilpasning ændret
@@ -17428,8 +17347,9 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
QgsComposerLegend
+ Legend
- Tegnforklaring
+ Tegnforklaring
@@ -17478,7 +17398,7 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Legend title alignment changed
-
Gruppe tilføjet til tegnforklaring
- Map %1
Kort %1
- None
Ingen
@@ -17729,22 +17649,22 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Title alignment:
-
Left
- Venstre
+
Center
-
Right
- Højre
+
QgsComposerMap
- Map %1
Kort %1
- Map will be printed here
Kort vil blive printet her
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Udtegn
- Rectangle
Rektangel
- Solid
Solid
- Cross
Kryds
- Markers
-
-
- Decimal
Decimal
- DegreeMinute
GradMinut
- DegreeMinuteSecond
GradMinutSekund
+ No frame
- Ingen ramme
+ Ingen ramme
- Zebra
Zebra
- Map scale changed
Målestok ændret
- Map rotation changed
Kortrotation ændret
- Map extent changed
Kortomrids ændret
- Select font color
Vælg fontfarve
@@ -18145,235 +18058,164 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Vælg gitter ramme fyldfarve
- Canvas items toggled
Kanvaselementer slået til
- None
Ingen
- Overview frame style changed
-
- Overview centering mode changed
Overblik centreringsmetode ændret
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Kortenhed
-
-
- Millimeter
- Millimeter
-
-
- Centimeter
-
-
- change...
- skift...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Gitter-checkboks slået til
- Grid interval changed
Gitterinterval ændret
- Grid offset changed
Gitteroffset ændet
- Grid line style changed
-
- Grid type changed
Gittertype ændret
+ Grid cross width changed
- Gitterkrydsbredde ændret
+ Gitterkrydsbredde ændret
- Annotation font changed
Anmærkningsfont ændret
+ Label font changed
- Labelfont ændret
+ Labelfont ændret
- Annotation distance changed
Anmærkningsafstand ændret
- Annotation format changed
Anmærkningsformat ændret
- Annotation toggled
Anmærkning slået til
- Changed annotation precision
Ændrede anmærkningspræcision
- Changed grid frame style
Gitter ramme stil ændret
+ Changed grid frame width
- Gitter ramme bredde ændret
+ Gitter ramme bredde ændret
- Changed grid frame line thickness
Ændret gitterramme liniebredde
- Grid frame color changed
Ændret gitterramme farve
- Grid frame first fill color changed
Gitter ramme første fyldfarve ændret
- Grid frame second fill color changed
Gitter ramme anden fyldfarve ændret
- Inside frame
Inden i ramme
- Outside frame
Uden på ramme
- Disabled
Slået fra
- Horizontal
Horisontal
- Vertical
Vertikal
- Annotation position changed
Anmærkningsposition ændret
- Changed annotation direction
Ændrede anmærkningsretning
- Map %1
Kort %1
@@ -18386,377 +18228,287 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Kortmuligheder
- Map
Kort
- Main properties
Hovedegenskaber
- Update preview
Opdatér layout
- Scale
Skala
- Map rotation
Kort rotation
- Draw map canvas items
Tegn kortkanvas-elemeneter
- Lock layers for map item
Lås lag til kortelement
- Extents
Kortudsnit(mbr)
- X max
X maks
- Y min
Y min
- Y max
Y maks
- Set to map canvas extent
Sæt til kortudsnit(mbr)
- X min
X min
- View extent in map canvas
-
- Controlled by atlas
Styret af Atlas funktion
- Margin around feature
Margen om objekt
- %
%
- Fixed scale
Fast skala
- Use one of the predefined scales of the project where the atlas feature best fits.
-
- Predefined scale (best fit)
-
+ Show grid
- Vis gitter
+ Vis gitter
+ Grid &type
- Gitter&type
+ Gitter&type
- Offset
Offset
- mm
mm
- Blend mode
Blandingstilstand
- Interval
Interval
- Grid frame
Gitte ramme
- Frame size
Ram. størrelse
- Frame line thickness
Ramme liniebredde
- Color...
Farve...
- Frame fill colors
Ramme fyldfarver
- Marker style
- Markørstilart
-
-
- Overview blending mode
Overblik over blandingstilstand
- Invert overview
Invertér overblik
- Center on overview
Centrér på overblik
- X
X
- °
°
- Y
Y
- Cross width
Krydsbredde
- Frame style
Rammestil
- Line style
Linjestil
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Gittertype
-
-
- CRS
- CRS
-
-
- change...
skift...
- Interval units
-
-
- Map unit
- Kortenhed
-
-
- Millimeter
- Millimeter
-
-
- Centimeter
-
-
- No frame
- Ingen ramme
-
-
- Zebra
- Zebra
-
-
- Draw coordinates
Tegn koordinater
- Format
Format
- Left
Venstre
- Right
Højre
- Top
Top
- Bottom
Bund
- Font
Skrifttype
- Font...
Font...
- Font color
- Fontfarve
-
-
- Distance to map frame
Afstand til kortramme
- Coordinate precision
Koordinatpræcision
- Font color...
Fontfarve...
- Overview
Oversigtskort
- Overview frame
Vælg oversigtskort
- Overview style
Oversigtsstil
- Change...
Skift...
@@ -18797,20 +18549,20 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
- Layout
+
- Picture expression eval error: %1
-
@@ -18823,64 +18575,64 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Picture changed
Billede ændret
- Expression based image path
-
- Picture rotation changed
Billedrotation ændret
- Select new preview directory
Vælg ny mappe til eksempler
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
Rotationssynkronisering slået til
- Rotation map changed
Rotationskort ændret
- Map %1
Kort %1
- Creating icon for file %1
Opretter ikon for fil %1
@@ -18905,7 +18657,7 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Image source
-
Expression
- Udtryk
+
Resize mode
- Resize-tilstand
+
Placement
- Placering
+
Zoom
- Zoom
+
Stretch
-
Clip
- Beskær
+
Zoom and resize frame
-
Resize frame to image size
-
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
- Midt
+
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
QgsComposerScaleBar
- units
enheder
- km
km
- m
m
- miles
mil
- ft
ft
- Nm
Nm
@@ -19081,38 +18833,38 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
QgsComposerScaleBarWidget
Single Box
Enkelt boks
Double Box
Dobbeltboks
Line Ticks Middle
Linjemærker i midten
Line Ticks Down
Linjemærker nede
Line Ticks Up
Linjemærker oppe
Numeric
Numerisk
@@ -19152,146 +18904,121 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Nautiske mil
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Vælg fontfarve
-
-
- Select stroke color
-
-
- Map %1
Kort %1
- Scalebar map changed
Målestokslinjes kort ændret
- Scalebar line width
Målestokslinjes linjebredde
- Scalebar segment size
Målestokslinjes segmentstørrelse
- Scalebar segments left
Målestokslinje-segmenter tilbage
- Number of scalebar segments changed
Antallet af målestokkens segmenter ændret
- Scalebar height changed
Målestokslinjes højde ændret
- Scalebar font changed
Målestokslinjes font ændret
- Scalebar font color changed
Målestokslinjes fontfarve ændret
- Scalebar color changed
Målestokslinjes farve ændret
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Målestokslinjes stregfarve ændret
- Scalebar unit text
Målestokslinjes enhedstekst
- Scalebar map units per segment
Målestokslinjes kortenheder per segment
- Scalebar style changed
Målestokslinjes stil ændret
- Scalebar label bar space
Målestokslinjes labellinjeplads
- Scalebar box content space
Målestokslinjes boks' plads til indhold
- Scalebar alignment
Målestokslinjes justering
- Scalebar changed to map units
Målestokslinje ændret til kortenheder
- Scalebar changed to feet
Målestokslinje ændret til fod
- Scalebar changed to nautical miles
Målestokslinje ændret til sømil
- Scalebar changed to meters
Målestokslinje ændret til meter
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -19398,12 +19125,12 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Join style
- Join-stilart
+
Cap style
- Stilart ved ender
+
Secondary fill color...
-
-
- Stroke color...
Stregfarve...
@@ -19446,37 +19168,37 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Ellipse
Ellipse
Rectangle
Rektangel
Triangle
Trekant
- Shape style changed
-
- Shape radius changed
Figurradius ændret
- Shape type changed
Figurtype ændret
@@ -19524,22 +19246,22 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Descending
- Faldende
+
Ascending
- Stigende
+
Attribute
- Attribut
+
Sort Order
-
@@ -19553,23 +19275,23 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
- Udtryksbaseret filter
+
Table header alignment changed
-
Refresh table data
-
Filter with
- Filtrér med
+
...
- ...
+
Header alignment
-
Follow column alignment
-
Left
- Venstre
+
Center
-
Right
- Højre
+
@@ -19887,107 +19609,107 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
QgsComposition
- Label added
Label tilføjet
- Map added
Kort tilføjet
- Arrow added
Pil tilføjet
- Scale bar added
Målestokslinje tilføjet
- Shape added
Figur tilføjet
- Picture added
Billede tilføjet
- Legend added
Tegnforklaring tilføjet
- Table added
Tabel tilføjet
- Aligned items left
Elementer venstrejusteret
- Aligned items horizontal center
Tilpas objekter midtfor horisontalt
- Aligned items vertical center
Tilpas objekter midtfor vertikalt
- Aligned items right
Elementer højrejusteret
- Aligned items top
Elementer topjusteret
- Aligned items bottom
Elementer bundjusteret
- Items locked
Elementer er låst
- Items unlocked
Elementer er låst op
- Item z-order changed
Elements z-orden ændret
- Remove item group
Fjern elementgruppe
- Frame deleted
Ramme slettet
- Item deleted
Element slettet
- Multiframe removed
Multiramme fjernet
@@ -20044,148 +19766,148 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Landscape
Liggende
Portrait
Stående
Map %1
Kort %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 tommer)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 tommer)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 tommer)
- ANSI C (17x22 in)
ANSI C (17x22 tommer)
- ANSI D (22x34 in)
ANSI D (22x34 tommer)
- ANSI E (34x44 in)
ANSI E (34x44 tommer)
- Arch A (9x12 in)
Arch A (9x12 tommer)
- Arch B (12x18 in)
Arch B (12x18 tommer)
- Arch C (18x24 in)
Arch C (18x24 tommer)
- Arch D (24x36 in)
Arch D (24x36 tommer)
- Arch E (36x48 in)
Arch E (36x48 tommer)
- Arch E1 (30x42 in)
Arch E1 (30x42 tommer)
- Custom
Brugerdefineret
@@ -20203,131 +19925,109 @@ Prøv en lavere opløsning eller en mindre papirstørrelse
Papir og kvalitet
- Presets
Papirstørrelse
- ...
- ...
-
-
- Width
Bredde
- Height
Højde
- Units
Enhed
- Number of pages
Antal sider
- Orientation
Papirretning
- Export resolution
Eksportopløsning
- Print as raster
Print som raster
-
- Snap tolerance
- Snap tolerance
-
-
- px
- px
-
Change...
Skift...
- Page background
Side baggrund
+ Grid
- Gitter
+ Gitter
- dpi
dpi
- World file on
Verdensfil aktiveret
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Gitteroffset
- x:
x:
- y:
y:
+ Spacing
- Mellemrum
+ Mellemrum
+ Snap to alignments
- Fastgør til justeringslinjer
+ Fastgør til justeringslinjer
+ Tolerance
- Tolerance
+ Tolerance
@@ -20712,7 +20412,7 @@ og den aktuelle fil er [%3]
Control rendering order
-
@@ -21259,68 +20959,68 @@ og den aktuelle fil er [%3]
Form
-
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
- standard
+
custom
-
preview
-
@@ -21504,7 +21204,7 @@ og den aktuelle fil er [%3]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23243,7 +22943,7 @@ Efterlad tom for automatisk at anvende maksimumværdien.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Kunne ikke sætte kolonne '%1' som eksempelkolonne.
@@ -23305,12 +23005,12 @@ Parserfejl:
Form
-
Dummy Text
-
@@ -23572,7 +23272,7 @@ Parserfejl:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23585,7 +23285,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24010,7 +23710,7 @@ p, li { white-space: pre-wrap; }
Only update %1 selected features
-
Expression dialog
-
@@ -24473,12 +24173,12 @@ MyForms.py skal være i PYTHONPATH, .qgis/python, eller i projektmappen.
...
- ...
+
Select a file
-
@@ -24487,13 +24187,13 @@ MyForms.py skal være i PYTHONPATH, .qgis/python, eller i projektmappen.
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
@@ -24688,7 +24388,7 @@ MyForms.py skal være i PYTHONPATH, .qgis/python, eller i projektmappen.<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -25735,7 +25435,7 @@ Vælg en gyldig fil.
Band
- Bånd
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26887,12 +26587,12 @@ p, li { white-space: pre-wrap; }
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
QgsGraduatedSymbolRendererV2Model
- Symbol
Symbol
- Value
Værdi
- Label
Label
@@ -27061,41 +26761,41 @@ p, li { white-space: pre-wrap; }
Avanceret
- Symbol levels...
Symbolniveauer...
- Error
Fejl
- There are no available color ramps. You can add them in Style Manager.
Der er ingen tilgængelige farveskalaer. Du kan tilføje dem i Stilartstyring.
- The selected color ramp is not available.
Den valgte farveskala er utilgængelig.
- Warning
Advarsel
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
Natural break (Jenks) klassifisering er O(n2) kompleks, klassificeringen kan tage lang tid.
Tryk på Fortryd for at afbryde beregning eller OK for at fortsætte.
- Renderer creation has failed.
Oprettelse af renderer mislykkedes.
@@ -27279,10 +26979,7 @@ Tryk på Fortryd for at afbryde beregning eller OK for at fortsætte.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Er du sikker på, at du slette %n valgt lag?
- Er du sikker på, at du slette %n valgte lag?
-
+ Er du sikker på, at du slette %n valgt lag? Er du sikker på, at du slette %n valgte lag?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29038,7 +28735,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29077,7 +28774,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29151,7 +28848,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29919,10 +29616,7 @@ på linje %2 kolonne %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Der er stadig %n ubehandlede lag, som vil gå tabt, hvis du lukker nu.
- Der er stadig %n ubehandlede lag, som vil gå tabt, hvis du lukker nu.
-
+ Der er stadig %n ubehandlede lag, som vil gå tabt, hvis du lukker nu. Der er stadig %n ubehandlede lag, som vil gå tabt, hvis du lukker nu.
@@ -30052,12 +29746,9 @@ på linje %2 kolonne %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Netværk timede ud efter %n sekunds inaktivitet.
-Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
- Netværk timede ud efter %n sekunders inaktivitet.
-Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
-
+ Netværk timede ud efter %n sekunds inaktivitet.
+Der er måske et problem med din netværksforbindelse, eller på WMS-serveren. Netværk timede ud efter %n sekunders inaktivitet.
+Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
@@ -30083,22 +29774,22 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
Layer
- Lag
+
FID
-
Attribute
- Attribut
+
Value
- Værdi
+
Clear Results
-
Help
- Hjælp
+
Mode
- Tilstand
+
Auto open form
-
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
Toggle feature selection
-
points
-
map units
-
mm
- mm
+
% of length
-
- Label this layer with
Sæt label på dette lag med
@@ -31332,22 +31023,22 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
...
...
@@ -31403,7 +31094,7 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.Flere linjer
- Automated placement settings (apply to all layers)
Indstillinger for automatisk placeering (gælder for alle lag)
@@ -31433,7 +31124,7 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
Rendering
Udtegning
@@ -31521,7 +31212,7 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
Alignment
Justering
@@ -31555,10 +31246,10 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
Repeat
- Gentag
+
- Discourage labels from covering features
Labels forhindres i at dække objekter
@@ -31653,82 +31344,82 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.Buffer
- Labels will not show if larger than this on screen
Labels vil ikke blive vist, hvis de er større end dette på skærmen
- px
px
- Data defined
Datadefineret
- X
X
- Y
Y
- Coordinate
Koordinat
- Preserve data rotation values
Bibehold datarotationsværdier
- horizontal
horisontal
- vertical
vertikal
- Label options
Labelmuligheder
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Værdien < 0 repræsenterer en skala tættere end 1:1, fx. -10 = 10:1.<br>Værdien 0 deaktiverer denne specifikke grænse.
- Maximum
Maksimum
- Pixel size-based visibility (labels in map units)
Pixelbaseret synlighed (labels i kortenheder)
- Labels will not show if smaller than this on screen
Labels vil ikke blive vist, hvis de er mindre end dette på skærmen
- Minimum
Minimum
@@ -31738,7 +31429,7 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.<
- Scale-based visibility
Skalabaseret synligheder
@@ -31776,17 +31467,17 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.Modsat retning
- Priority
Prioritet
- Low
Lav
- High
Høj
@@ -31939,7 +31630,7 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
Rotation
Rotation
@@ -31991,17 +31682,17 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.Afstand
- outside
udenfor
- inside
indeni
- Maximum angle between curved characters
Maksimumvinkel mellem kurvede tegn
@@ -32107,62 +31798,62 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.symbolenheder
- Merge connected lines to avoid duplicate labels
Flet forbundne linjer for at undgå dublerede labels
- Label every part of multi-part features
Sæt label på hver del i flerdelsobjekter
- Feature options
Objektmuligheder
- Suppress labeling of features smaller than
Undertryk labels på objekter mindre end
- mm
mm
- Show all labels for this layer (including colliding labels)
Vis alle labels for dette lag (inklusiv kolliderende labels)
- Show upside-down labels
Vis labels på hovedet
- never
aldrig
- when rotation defined
når rotation er defineret
- always
altid
- Limit number of features to be labeled to
Begræns antal objekter med labels til
- Number of features sent to labeling engine, though not all may be labeled
Antal objekter sendt til label funktion; de udtegnes dog måske ikke alle sammen
@@ -32172,17 +31863,17 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.Position
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Afmarkér for at skrive rotation udledt af labelværktøj, og NULL ved frigørelse
- Always show
Vis altid
- Show label
Vis label
@@ -32198,15 +31889,15 @@ Der er måske et problem med din netværksforbindelse, eller på WMS-serveren.
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -32214,58 +31905,58 @@ not displayed
&Add Group
-
&Remove
- &Fjern
+
&Show in overview
-
Re&name
- Om&døb
+
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
QgsLegendModel
- Group
Gruppe
- No Legend Available
Ingen tegnforklaring tilgængelig
@@ -32276,13 +31967,13 @@ not displayed
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
QgsMapCanvas
- canvas
-
- Rendering
Udtegning
- Canvas refresh: %1 ms
-
@@ -32898,7 +32589,7 @@ not displayed
Delete ring can only be used in a polygon layer.
-
All (%1)
-
Maximum scale:
-
Minimum scale:
-
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
Offset along line
-
@@ -33689,10 +33380,7 @@ not displayed
%n more
unread messages
-
- %n flere
- %n flere
-
+ %n flere %n flere
@@ -33752,7 +33440,7 @@ not displayed
Show non-spatial tables
-
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Forbindelse mislykkedes - hostnavn er ikke angivet.
@@ -33839,7 +33527,7 @@ not displayed
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Forbindelse mislykkedes - Databasenavn er ikke angivet.
@@ -35392,10 +35080,7 @@ Udvidet fejlinformation:
Coordinate Reference System (%n available)
crs count
-
- Koordinatsystem (%n tilgængelig)
- Koordinat system (%n tilgængelige)
-
+ Koordinatsystem (%n tilgængelig) Koordinat system (%n tilgængelige)
Identify highlight color
-
Solid
Solid
Dots
Prikker
Crosses
Kors
- Detected active locale on your system: %1
Aktive landekoder fundet på dit system %1
- To vertex
Til punkt
- To segment
Til segment
- To vertex and segment
Til punkt og segment
- map units
kortenheder
- pixels
pixels
- Semi transparent circle
Semitransparent cirkel
- Cross
Kryds
- None
Ingen
- QGIS files
QGIS-filer
- Off
Fra
- QGIS
QGIS
- GEOS
GEOS
- Round
Afrund
- Mitre
Gering
- Bevel
Fas
- Save default project
Gem standardprojekt
- You must set a default project
Du skal sætte et standardprojekt
- Current project saved as default
Aktuelt projekt gemt som standard
- Error saving current project as default
Fejl ved gemning af projekt som standard
- Choose a directory to store project template files
Vælg en amppe til at gemme projekt-skabelonfiler
@@ -36522,105 +36207,105 @@ Altid netværk: indlæs altid fra netværk og tjek ikke, om cachen har en gyldig
Vis objekter synlige på kort
- Choose project file to open at launch
Vælg projektfil, som skal åbnes ved start
- Create Options - %1 Driver
Oprettelsesmuligheder: - %1-driver
- Create Options - pyramids
Oprettelsesmuligheder .- pyramider
- Restore UI defaults
Gendan brugerflade standarder
- Are you sure to reset the UI to default (needs restart)?
Er du sikker på at vil gendanne brugerfladen til standard (program genstart nødvendig)?
- Overwrite
Overskriv
- If Undefined
Hvis udefineret
- Unset
Slå fra
- Prepend
Foranstil
- Append
Vedhæft
- Choose a directory
Vælg en mappe
- Enter scale
Angiv skala
- Scale denominator
Fællesnævner til skala
- Load scales
Indlæs skalaer
- XML files (*.xml *.XML)
XML-filer (*.xml *.XML)
- Save scales
Gem skalaer
- No Stretch
Intet stræk
- Stretch To MinMax
Stræk til MinMaks
- Stretch And Clip To MinMax
Stræk og beskær til MinMaks
- Clip To MinMax
Beskær til MinMaks
@@ -36640,7 +36325,7 @@ Altid netværk: indlæs altid fra netværk og tjek ikke, om cachen har en gyldig
General
Generelt
@@ -36823,7 +36508,7 @@ Altid netværk: indlæs altid fra netværk og tjek ikke, om cachen har en gyldig
...
...
@@ -36871,7 +36556,7 @@ Altid netværk: indlæs altid fra netværk og tjek ikke, om cachen har en gyldig
Prompt for confirmation when a layer is to be removed
-
QSettings
-
Reset the User Interface settings, to reset QGIS to it's default view
-
Remove
Fjern
@@ -36947,7 +36632,7 @@ Altid netværk: indlæs altid fra netværk og tjek ikke, om cachen har en gyldig
Add
Tilføj
@@ -37059,12 +36744,12 @@ Altid netværk: indlæs altid fra netværk og tjek ikke, om cachen har en gyldig
Render layers in parallel using many CPU cores
-
Max cores to use:
-
Highlight color
-
<html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
Buffer
- Buffer
+
Lines / outlines buffer in millimeters.
-
Minimum width
-
Minimum line / outline width in millimeters.
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Undertryk attribut popup-vindue efter hvert oprettet objekt
@@ -37396,17 +37066,17 @@ Altid netværk: indlæs altid fra netværk og tjek ikke, om cachen har en gyldig
Map update interval
-
ms
-
Enable feature simplification by default for newly added layers
-
Farve...
+ Grid defaults
- Gitter standard indstillinger
+ Gitter standard indstillinger
+ Spacing
- Mellemrum
+ Mellemrum
mm
mm
@@ -37551,370 +37225,372 @@ Altid netværk: indlæs altid fra netværk og tjek ikke, om cachen har en gyldig
Snap tolerance
Snap tolerance
+ Guide defaults
- Hjælpelinier standard indstillinger
+ Hjælpelinier standard indstillinger
- Feature creation
Oprettelse af objekter
- Validate geometries
Valider geometrier
- Reuse last entered attribute values
Genbrug sidst angivne attributværdier
- Rubberband
Elastik
- Line color
Linjefarve
- Line width in pixels
Linjebredde i pixels
- Line width
Linjebredde
- Snapping
Snapping
- Default snap mode
Standard snap-tilstand
- Default snapping tolerance
Standard snap-tolerance
- Search radius for vertex edits
Søgeradius for punktredigeringer
- map units
kortenheder
pixels
pixels
- Open snapping options in a dock window (QGIS restart required)
Vis snap-muligheder i et forankret vindue (kræver QGIS-genstart)
- Vertex markers
punktmarkører
- Marker style
Markørstilart
- Marker size
Markørstørrelse
- Show markers only for selected features
Vis kun markører for valgte objekter
- Curve offset tool
Kurveoffset-værktøj
- Miter limit
Geringsgrænse
- Join style
Join-stilart
- Quadrant segments
Segmentantal pr. kvadrant
- GDAL driver options
GDAL-driverindstillinger
- Edit Pyramids Options
Redigér pyramidemuligheder
- Edit Create Options
Redigér oprettelsesmuligheder
- GDAL drivers
GDAL-drivere
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
I nogen tilfælde kan mere end én GDAL-driver bruges til at indlæse det samme raster-format. Brug listen herunder til at angive, hvilken der skal bruges.
- Name
Navn
- ext
end
- Flags
Flag
- Description
Beskrivelse
- CRS for new layers
CRS for nye lag
- Select...
Vælg...
- Use &project CRS
Brug &projekt-CRS
- Prompt for &CRS
Spørg efter &CRS
- Use default CRS displa&yed below
Brug standard-CRS &vist nedenfor
- When a new layer is created, or when a layer is loaded that has no CRS
Når et nyt lag oprettes, eller når et lag indlæses, som ikke har noget CRS
- Default CRS for new projects
Standard-CRS for nye projekter
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Aktivér automatisk CRS-transformation, hvis et nyt lags CRS afviger fra de(t) aktuelle lags CRS. Aktuelle lags CRS vil blive brugt.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Aktivér automatisk CRS-transformation, hvis lag har forskellige CRS'er
- Always start new projects with this CRS
Start altid nye projekter med dette CRS
- Enable 'on the &fly' reprojection by default
&Aktivér automatisk CRS-transformation som standard
- Don't enable 'on the fly' reprojection
Deaktivér automatisk CRS transformation
- Default datum transformations
Standard datum transformationer
- Source CRS
Kilde CRS
- Destination CRS
Destinations CRS
- Source datum transform
Kilde datum transformation
- Destination datum transform
Destination datum transformation
- Ask for datum transformation when no default is defined
Spørg efter datum transformering når der ikke er defineret nogen standardværdier
- Override system locale
Tilsidesæt systemets landekode
- Locale to use instead
Landekode, som i stedet skal bruges
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>NB:</b> Ændringer ved tilsidesættelse kræver en programgenstart
- Additional Info
Yderligere info
- Detected active locale on your system:
Fundne aktive landekoder på dit system:
- WMS search address
WMS-søgeadresse
- Timeout for network requests (ms)
Timeout for netværksforespørgsler (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Standard-udløbsperiode for WMS-C/WMTS-tiles (timer)
- Max retry in case of tile request errors
Maks. antal forsøg ved fejl under tile forespørgsel
- User-Agent
Bruger-agent
- Cache settings
Cache-indstillinger
- Directory
Mappe
- Size [KiB]
Størrelse [KiB]
- Clear
Ryd
- Use proxy for web access
Brug proxy til internetadgang
- Host
Host
- Port
Port
- User
Bruger
- Leave this blank if no proxy username / password are required
Efterlad denne blank, hvis der ikke er påkrævet et proxy-brugernavn /-kodeord
- Password
Kodeord
- Proxy type
Proxytype
- Exclude URLs (starting with)
Udelad URLs (starter med)
@@ -39776,7 +39452,7 @@ Fejl: %2
Form
-
Picture size
-
Width
- Bredde
+
Height
- Højde
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39809,12 +39485,12 @@ Fejl: %2
Select a picture
-
...
- ...
+
@@ -39896,7 +39572,7 @@ Fejl: %2
Plugin er forsvundet
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
Pluginet ser ud til at være installeret, men det vides ikke hvor. Plugin-pakken indeholdt formentlig en forkert navngivet mappe.
Søg listen af installerede plugins. Pluginet findes næsten helt sikkert der, men det kan ikke afgøres, hvilken det er. Det betyder også, at det ikke kan afgøres, om pluginet er installeret, og der kan ikke informeres om tilgængelige opdateringer. Dog kan pluginet alligevel virke. Kontakt forfatteren af pluginet og indrapportér problemet.
@@ -40246,7 +39922,7 @@ QGIS skal genstartes for at genindlæse det.
Installable
category: plugins that are available for installation
-
%1 rating vote(s)
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
about:blank
- about:blank
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40637,7 +40313,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40655,7 +40331,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40842,7 +40518,7 @@ p, li { white-space: pre-wrap; }
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
QgsProjectProperties
- Layer
Lag
- Type
Type
- Identifiable
Identificerbare
- Vector
Vektor
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
Begrænsning på koordinatsystem
- No coordinate systems selected. Disabling restriction.
Ingen koordinatsystemer valgt. Deaktiverer begrænsning.
- Selection color
Selektionsfarve
- Measure tool (CRS transformation: %1)
Måleværktøj (CRS-transformering: %1)
- Canvas units (CRS transformation: %1)
Kanvasenheder (CRS-transformering: %1)
+ OFF
FRA
+ ON
TIL
- CRS %1 was already selected
CRS %1 var allerede valgt
- Coordinate System Restrictions
Begrænsninger på koordinatsystem
- The current selection of coordinate systems will be lost.
Proceed?
De aktuelt markerede koordinatsystemer vil gå tabt.
Fortsæt?
- Select print composer
Vælg printlayout
- Composer Title
Layouttitel
- Select restricted layers and groups
Vælg begrænsede lag og grupper
- Enter scale
Angiv skala
- Scale denominator
Fællesnævner for skala
- Load scales
Indlæs skalaer
- XML files (*.xml *.XML)
XML-filer (*.xml *.XML)
- Save scales
Gem skalaer
- Select a valid symbol
Vælg et gyldigt symbol
- Invalid symbol :
Ugyldigt symbol :
- Parameters:
Parametre:
+ Select %1 from pull-down menu to adjust radii
Vælg %1 fra rullemenuen for justere radier
- Can only use ellipsoidal calculations when CRS transformation is enabled
Kan kun bruge elliptiske beregninger, når CRS-transformeringer er slået til
@@ -41691,7 +41367,6 @@ Fortsæt?
Project title
Projekttitel
@@ -41731,37 +41406,37 @@ Fortsæt?
Gem stier
- Measure tool
Måleværktøj
- Semi-minor
Lille halvakse
- Semi-major
Store halvakse
- Used when CRS transformation is turned off
Brugt, når CRS-transformering er slået fra
- Canvas units
Kanvasenheder
- Meters
Meter
- Feet
Fod
@@ -41793,98 +41468,98 @@ Fortsæt?
OWS-server
- Ellipsoid
(for distance calculations)
Ellipsoide
(for afstandsberegning)
- Degree
Grad
- Degree display
Visning af grader
- Decimal degrees
Grader, decimaler
- Degrees, Minutes
Grader, minutter
- Degrees, Minutes, Seconds
Grader, minutter, sekunder
- Precision
Præcision
- Automatically sets the number of decimal places in the mouse position display
Sætter automatisk antallet af decimalpladser i musepositionsvisningen
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Antallet af decimalpladser, som bruges, når visning af musepositionen automatisk er sat til være nok til at flytning af musen med én pixel giver en ændring i positionsvisningen
- Automatic
Automatisk
- Sets the number of decimal places to use for the mouse position display
Sætter antallet af decimalpladser, som bruges til visning af museposition
- Manual
Manuelt
- The number of decimal places for the manual option
Antallet af decimalpladser for den manuelle mulighed
- decimal places
decimalpladser
- Project scales
Projektskalaer
- ...
...
- Enable 'on the fly' CRS transformation
Aktivér automatisk CRS-transformation
@@ -41894,69 +41569,69 @@ Fortsæt?
Identificerbare lag
- Project layers
Projektlag
- Layer
Lag
- Type
Type
- Identifiable
Identificerbare
- Marker
Markør
- Line
Linje
- Default symbols
Standardsymboler
- Fill
Fyld
- Color Ramp
Farveskala
- Transparency
Transparens
- %
%
- Style Manager
Stilartstyring
- Options
Generelle indstillinger
@@ -41966,170 +41641,165 @@ Fortsæt?
Relationer
- Project file
- Projektfil
-
-
- Nautical miles
Sømil
- Assign random colors to symbols
Tildel tilfældige farver til symboler
- Service capabilities
Service-Capabilities
- Person
Person
- Title
Titel
- Organization
Organisation
- Online resource
Onlineressource
- E-Mail
E-mail
- Phone
Telefon
- Abstract
Resumé
- Fees
Afgifter
- Access constraints
Adgangsbegrænsninger
- Keyword list
Nøgleordsliste
- WMS capabilities
WMS capabilities
- Add geometry to feature response
Tilføj geometri til objekt respons
- Min. X
Min. X
- Min. Y
Min. Y
- Max. X
Maks. X
- Max. Y
Maks. Y
- Use Current Canvas Extent
Brug aktuelt kanvasomrids
- Used
Brugt
- Exclude composers
Ekskludér layout
- WFS capabilities
WFS capabilities
- WCS capabilities
WCS capabilities
- Exclude layers
Ekskludér lag
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
Kvalitet af JPEG billeder ( 10 : dårlig - 100 : bedste kvalitet )
- Published
Udgivet
- Update
Opdatér
- Insert
Indsæt
- Delete
Slet
- Unselect all
Fravælg alle
- Select all
Vælg alle
@@ -42140,39 +41810,39 @@ Fortsæt?
Makroer
- Advertised URL
Annonceret URL
- Width
Bredde
- Height
Højde
- Maximums for GetMap request
Maksimummer for GetMap-forespørgsel
- Advertised extent
Annonceret omrids
- CRS restrictions
CRS-begrænsninger
- Python macros
Python-makroer
@@ -42275,7 +41945,7 @@ Derfor vil projektionsvælgeren ikke virke...
Set provider filter on %1
-
The where clause returned %n row(s).
returned test rows
-
- where-clausen returnerede %n række.
- where-clausen returnerede %n rækker.
-
+ where-clausen returnerede %n række. where-clausen returnerede %n rækker.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42363,7 +42030,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42374,7 +42041,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42390,7 +42057,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42494,29 +42161,29 @@ p, li { white-space: pre-wrap; }
Editable
- Redigérbar
+
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42524,32 +42191,32 @@ p, li { white-space: pre-wrap; }
Form
-
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Maximum
- Maksimum
+
Minimum
- Minimum
+
Local minimum/maximum = 0/0
-
@@ -42994,17 +42661,17 @@ Klik på hjælpeknappen for at få gyldige oprettelsesmuligheder for dette forma
Display
- Visning
+
Draw as lines
-
Draw as lines (only int layers)
-
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
No option selected
-
Please select an option to load min/max values.
-
@@ -45133,10 +44800,7 @@ standardafvigelse ×
Filter returned %n feature(s)
number of filtered features
-
- Filter returnerede %n objekt
- Filter returnerede %n objekter
-
+ Filter returnerede %n objekt Filter returnerede %n objekter
@@ -45629,23 +45293,23 @@ standardafvigelse ×
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
Select SVG texture file
-
All files
- Alle filer
+
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -45775,7 +45439,7 @@ standardafvigelse ×
Scale visibility
-
@@ -45824,10 +45488,7 @@ standardafvigelse ×
Found %n matching feature(s).
test result
-
- Fandt %n matchende resultat.
- Fandt %n matchende resultater.
-
+ Fandt %n matchende resultat. Fandt %n matchende resultater.
Validation finished (%n error(s) found).
number of geometry errors
-
- Validering afsluttet (%n fejl fundet).
- Validering afsluttet (%n fejl fundet).
-
+ Validering afsluttet (%n fejl fundet). Validering afsluttet (%n fejl fundet).
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
Color (start)
- Farve (start)
+
Color (end)
- Farve (slut)
+
Blur radius
- Sløringsradius
+
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -46060,13 +45718,13 @@ Fejlen var:
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
%n selected geometries
selected geometries
-
- %n valgt geometri
- %n valgte geometrier
-
+ %n valgt geometri %n valgte geometrier
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47384,7 +47039,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47998,8 +47653,8 @@ Vil du overskrive [%2]-relationen?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -48036,124 +47691,152 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Det lykkedes ikke at indlæse grænseflade
+ Det lykkedes ikke at indlæse grænseflade
+ Failed to connect to database
- Forbindelse til database mislykkedes
+ Forbindelse til database mislykkedes
+ A connection to the SQL Anywhere database cannot be established.
- En forbindelse til SQL Anywhere-databasen kan ikke oprettes.
+ En forbindelse til SQL Anywhere-databasen kan ikke oprettes.
+ No suitable key column
- Ingen brugbar nøglekolonne
+ Ingen brugbar nøglekolonne
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- Kilderelationen %1 har ingen kolonne, som er egnet til at være unik nøgle.
+ Kilderelationen %1 har ingen kolonne, som er egnet til at være unik nøgle.
QGIS kræver, at relationen har en heltalskolonne, som ikke er større end 32 bits, indeholdende unikke værdier.
+ Error loading attributes
- Fejl ved indlæstning af attributter
+ Fejl ved indlæstning af attributter
+ Ambiguous field!
- Tvetydigt felt!
+ Tvetydigt felt!
+ Duplicate field %1 found
- Dubleret felt %1 fundet
+ Dubleret felt %1 fundet
+ Read attempt on an invalid SqlAnywhere data source
- Læseforsøg på en ugyldig SqlAnywhere-datakilde
+ Læseforsøg på en ugyldig SqlAnywhere-datakilde
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Fejl ved indsættelse af objekter
+ Fejl ved indsættelse af objekter
+ Error deleting features
- Fejl ved sletning af objekter
+ Fejl ved sletning af objekter
+ Error adding attributes
- Fejl ved tilføjelse af attributter
+ Fejl ved tilføjelse af attributter
+ Error deleting attributes
- Fejl ved sletning af attributter
+ Fejl ved sletning af attributter
+ Attribute not found
- Attribut ikke fundet
+ Attribut ikke fundet
+ Error updating attributes
- Fejl ved opdatering af attributter
+ Fejl ved opdatering af attributter
+ Error updating features
- Fejl ved opdatering af objekter
+ Fejl ved opdatering af objekter
+ Error verifying geometry column %1
- Fejl ved bekræftelse af geometrikolonne %1
+ Fejl ved bekræftelse af geometrikolonne %1
+ Unknown geometry type
- Ukendt geometritype
+ Ukendt geometritype
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- Kolonne %1 har geometritypen %2, som QGIS aktuelt ikke understøtter.
+ Kolonne %1 har geometritypen %2, som QGIS aktuelt ikke understøtter.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- Kolonne %1 er ikke begrænset til et enkelt SRID, som QGIS kræver.
+ Kolonne %1 er ikke begrænset til et enkelt SRID, som QGIS kræver.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Da QGIS kun understøtter plandata, vil SQL Anywhere-udbyderen transformere dataene til den kompatible planprojektion (SRID=%1).
+ Da QGIS kun understøtter plandata, vil SQL Anywhere-udbyderen transformere dataene til den kompatible planprojektion (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Da QGIS kun understøtter plandata, og ingen kompatible planprojektioner blev fundet, vil SQL Anywhere-udbyderen prøve at transformere dataene til planprojektionen WGS 84 (SRID=%1).
+ Da QGIS kun understøtter plandata, og ingen kompatible planprojektioner blev fundet, vil SQL Anywhere-udbyderen prøve at transformere dataene til planprojektionen WGS 84 (SRID=%1).
+ Mixed Spatial Reference Systems
- Miksede koordinatsystemer
+ Miksede koordinatsystemer
+ Error checking database ReadOnly property
- Fejl ved tjekning af databasens skrivebeskyttelsesegenskab
+ Fejl ved tjekning af databasens skrivebeskyttelsesegenskab
+ Error loading SRS definition
- Fejl ved indlæsning af CRS-definition
+ Fejl ved indlæsning af CRS-definition
+ Limited Support of Round Earth SRS
- Begrænset understøttelse af Round Earth CRS
+ Begrænset understøttelse af Round Earth CRS
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- Kolonnen %1 (%2) indeholder geometrier, som tilhører et Round Earth-koordinatsystem (SRID=%3). %4
+ Kolonnen %1 (%2) indeholder geometrier, som tilhører et Round Earth-koordinatsystem (SRID=%3). %4
Opdateringer af geometriværdier vil blive slået fra, og forespørgselsydeevnen kan være dårlig, da spatielle indekser ikke bruges. For at forbedre ydeevnen bør der oprettes et spatielt indeks på en ny (muligvis beregnet) kolonne, som indeholder en planprojektion af disse geometrier. Referer til beskrivelsen af ST_SRID(INT)- og ST_Transform(INT)-metoderne i SQL Anywhere-dokumentationen for hjælp.
@@ -48288,14 +47971,14 @@ Opdateringer af geometriværdier vil blive slået fra, og forespørgselsydeevnen
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Symbol med navnet '%1' findes allerede.
Overskriv?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Farveskala med navnet '%1' findes allerede.
Overskriv?
@@ -48851,17 +48534,17 @@ Der var et problem med til din symboldatabase.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48871,14 +48554,14 @@ Der var et problem med til din symboldatabase.
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
diameter
-
@@ -49011,27 +48694,27 @@ Der var et problem med til din symboldatabase.
Symbol name
- Symbolnavn
+
Please enter name for the symbol:
-
New symbol
-
Save symbol
- Gem symbol
+
Symbol with name '%1' already exists. Overwrite?
- Symbol med navnet '%1' findes allerede. Overskriv?
+
@@ -49074,7 +48757,7 @@ Der var et problem med til din symboldatabase.
Save
- Gem
+
@@ -49082,37 +48765,37 @@ Der var et problem med til din symboldatabase.
Millimeter
- Millimeter
+
Map unit
- Kortenhed
+
Symbol name
- Symbolnavn
+
Please enter name for the symbol:
-
New symbol
-
Save symbol
- Gem symbol
+
Symbol with name '%1' already exists. Overwrite?
- Symbol med navnet '%1' findes allerede. Overskriv?
+
Form
-
Multiline
- Multilinje
+
HTML
- HTML
+
@@ -49427,7 +49110,7 @@ Der var et problem med til din symboldatabase.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -49672,17 +49355,17 @@ p, li { white-space: pre-wrap; }
Form
-
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Editable
- Redigérbar
+
@@ -49690,7 +49373,7 @@ p, li { white-space: pre-wrap; }
Form
-
Select a file
-
Error
- Fejl
+
Could not open file %1
Error was:%2
-
@@ -49722,37 +49405,37 @@ Error was:%2
Form
-
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
-
Value
- Værdi
+
Description
- Beskrivelse
+
Remove Selected
-
@@ -49768,52 +49451,52 @@ Error was:%2
Form
-
Select layer, key column and value column
-
Layer
- Lag
+
Key column
- Nøglekolonne
+
Value column
-
Allow null value
-
Order by value
-
Allow multiple selections
-
Filter expression
-
...
- ...
+
@@ -49821,7 +49504,7 @@ Error was:%2
(no selection)
- (ingen selektion)
+
@@ -50202,37 +49885,25 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- SUCCES: %n attribut slettet.
- SUCCES: %n attributter slettet.
-
+ SUCCES: %n attribut slettet. SUCCES: %n attributter slettet.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- FEJL: %n attribut ikke slettet.
- FEJL: %n attributter ikke slettet.
-
+ FEJL: %n attribut ikke slettet. FEJL: %n attributter ikke slettet.
SUCCESS: %n attribute(s) added.
added attributes count
-
- SUCCES: %n attribut tilføjet.
- SUCCES: %n attributter tilføjet.
-
+ SUCCES: %n attribut tilføjet. SUCCES: %n attributter tilføjet.
ERROR: %n new attribute(s) not added
not added attributes count
-
- FEJL: %n ny attribut ikke tilføjet
- FEJL: %n nye attributter ikke tilføjet
-
+ FEJL: %n ny attribut ikke tilføjet FEJL: %n nye attributter ikke tilføjet
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- SUCCES: %n attributværdi ændret.
- SUCCES: %n attributværdier ændret.
-
+ SUCCES: %n attributværdi ændret. SUCCES: %n attributværdier ændret.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- FEJL: %n attributværdi-ændring ikke anvendt.
- FEJL: %n attributværdi-ændringer ikke anvendt.
-
+ FEJL: %n attributværdi-ændring ikke anvendt. FEJL: %n attributværdi-ændringer ikke anvendt.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- SUCCES: %n objekt slettet.
- SUCCES: %n objekter slettet.
-
+ SUCCES: %n objekt slettet. SUCCES: %n objekter slettet.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- FEJL: %n objekt ikke slettet.
- FEJL: %n objekter ikke slettet.
-
+ FEJL: %n objekt ikke slettet. FEJL: %n objekter ikke slettet.
SUCCESS: %n feature(s) added.
added features count
-
- SUCCES: %n objekt tilføjet.
- SUCCES: %n objekter tilføjet.
-
+ SUCCES: %n objekt tilføjet. SUCCES: %n objekter tilføjet.
ERROR: %n feature(s) not added.
not added features count
-
- FEJL: %n objekt ikke tilføjet.
- FEJL: %n objekter ikke tilføjet.
-
+ FEJL: %n objekt ikke tilføjet. FEJL: %n objekter ikke tilføjet.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- FEJL: %n objekt ikke tilføjet - udbyder understøtter ikke tilføjelse af objekter.
- FEJL: %n objekter ikke tilføjet - udbyder understøtter ikke tilføjelse af objekter.
-
+ FEJL: %n objekt ikke tilføjet - udbyder understøtter ikke tilføjelse af objekter. FEJL: %n objekter ikke tilføjet - udbyder understøtter ikke tilføjelse af objekter.
SUCCESS: %n geometries were changed.
changed geometries count
-
- SUCCES: %n geometri blev ændret.
- SUCCES: %n geometrier blev ændret.
-
+ SUCCES: %n geometri blev ændret. SUCCES: %n geometrier blev ændret.
ERROR: %n geometries not changed.
not changed geometries count
-
- FEJL: %n geometri ikke ændret.
- FEJL: %n geometrier ikke ændret.
-
+ FEJL: %n geometri ikke ændret. FEJL: %n geometrier ikke ændret.
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Save only selected features
-
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
Failed to parse WMS URI
-
Failed to download capabilities:
-
Options (%n coordinate reference systems available)
crs count
-
- Indstillinger (%n koordinatsystem tilgængelig)
- Indstillinger (%n koordinatsystemer tilgængelige)
-
+ Indstillinger (%n koordinatsystem tilgængelig) Indstillinger (%n koordinatsystemer tilgængelige)
Coordinate Reference System (%n available)
crs count
-
- Koordinatsystem (%n tilgængelig)
- Koordinatsystem (%n tilgængelige)
-
+ Koordinatsystem (%n tilgængelig) Koordinatsystem (%n tilgængelige)
%n Layer(s) selected
selected layer count
-
- %n lag valgt
- %n lag valgt
-
+ %n lag valgt %n lag valgt
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
- WCS
+
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -52023,12 +51658,12 @@ Svar var:
Response was:
%4
-
Service Exception
- Serverfejl
+
(and %n more)
crs
-
- (og %n flere)
- (og %n flere)
-
+ (og %n flere) (og %n flere)
...
- ...
+
Select a file
-
@@ -52276,7 +51908,7 @@ Response was:
Form
-
Width
- Bredde
+
Height
- Højde
+
@@ -52299,33 +51931,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
- %1 af %2 bytes af 'capabilities' downloadet.
+
Capabilities request redirected.
- 'Capabilities'-forespørgsel omdirigeret.
+
Redirect loop detected: %1
- Omdirigeringsløkke fundet: %1
+
WMS
- WMS
+
empty of capabilities: %1
- ingen 'capabilities': %1
+
Download of capabilities failed: %1
- Download af 'capabilities' mislykkedes: %1
+
@@ -52333,7 +51965,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -52439,37 +52071,25 @@ Response was:
%n tile requests in background
tile request count
-
- %n tile-forespørgsel i baggrunden
- %n tile-forespørgsler i baggrunden
-
+ %n tile-forespørgsel i baggrunden %n tile-forespørgsler i baggrunden
, %n cache hits
tile cache hits
-
- , %n cachehit
- , %n cachehits
-
+ , %n cachehit , %n cachehits
, %n cache misses.
tile cache missed
-
- , %n cache-forbier.
- , %n cache-forbiere.
-
+ , %n cache-forbier. , %n cache-forbiere.
, %n errors.
errors
-
- , %n fejl.
- , %n fejl.
-
+ , %n fejl. , %n fejl.
(and %n more)
crs
-
- (og %n flere)
- (og %n flere)
-
+ (og %n flere) (og %n flere)
Identifier
-
Tile mode
-
Invalid tile mode
-
Selected tile matrix set
-
Scale
- Skala
+
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
Width
- Bredde
+
Height
- Højde
+
Top
- Top
+
Left
- Venstre
+
Bottom
- Bund
+
Right
- Højre
+
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Tile request error
-
Status: %1
Reason phrase: %2
- Status: %1
-Årsagsfrase: %2
+
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
- %n tile-forespørgsel i baggrunden
- %n tile-forespørgsler i baggrunden
-
+
, %n cache hits
tile cache hits
-
- , %n cachehit
- , %n cachehits
-
+
, %n cache misses.
tile cache missed
-
- , %n cache-forbier.
- , %n cache-forbiere.
-
+
, %n errors.
errors
-
- , %n fejl.
- , %n fejl.
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -53258,7 +52856,7 @@ Reason phrase: %2
Record Metadata
-
@@ -53563,62 +53161,76 @@ Reason phrase: %2
SaDbTableModel
+ Schema
- Skema
+ Skema
+ Table
- Tabel
+ Tabel
+ Type
- Type
+ Type
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Linjefortolkning
+ Linjefortolkning
+ Geometry column
- Geometrikolonne
+ Geometrikolonne
+ Sql
- SQL
+ SQL
SaNewConnection
+ Save connection
- Gem forbindelse
+ Gem forbindelse
+ Should the existing connection %1 be overwritten?
- Skal den eksisterende forbindelse %1 overskrives?
+ Skal den eksisterende forbindelse %1 overskrives?
+ Failed to load interface
- Det lykkedes ikke at indlæse grænseflade
+ Det lykkedes ikke at indlæse grænseflade
+ Test connection
- Test forbindelsen
+ Test forbindelsen
+ Connection to %1 was successful
- Forbindelse til %1 lykkedes
+ Forbindelse til %1 lykkedes
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Forbindelse mislykkedes - Tjek indstillinger og prøv igen.
+ Forbindelse mislykkedes - Tjek indstillinger og prøv igen.
SQL Anywhere-fejlkode: %1
Beskrivelse: %2
@@ -53627,276 +53239,348 @@ Beskrivelse: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Opret ny SQL Anywhere-forbindelse
+ Opret ny SQL Anywhere-forbindelse
+ Connection Information
- Forbindelsesinformation
+ Forbindelsesinformation
+ Name
- Navn
+ Navn
+ Host
- Host
+ Host
+ Port
- Port
+ Port
+ Server
- Server
+ Server
+ Database
- Database
+ Database
+ Connection Parameters
- Forbindelsesparametre
+ Forbindelsesparametre
+ Username
- Brugernavn
+ Brugernavn
+ Password
- Kodeord
+ Kodeord
+ Name of the new connection
- Navn på den nye forbindelse
+ Navn på den nye forbindelse
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Navn eller IP-adresse på computeren, som hoster databaseserveren (blank for lokale forbindelser)
+ Navn eller IP-adresse på computeren, som hoster databaseserveren (blank for lokale forbindelser)
+ Port number used by the database server (leave blank for default 2638)
- Portnummer brugt af databaseserveren (blank for standard 2638)
+ Portnummer brugt af databaseserveren (blank for standard 2638)
+ Name of the database server (leave blank for default server on host)
- Navn på databaseserver (blank for standardserver på host)
+ Navn på databaseserver (blank for standardserver på host)
+ Name of the database (leave blank for default database on server)
- Navn på database (blank for standarddatabase på server)
+ Navn på database (blank for standarddatabase på server)
+ Additional connection parameters
- Yderligere forbindelsesparametre
+ Yderligere forbindelsesparametre
+ Database username
- Database-brugernavn
+ Database-brugernavn
+ Database password
- Database-kodeord
+ Database-kodeord
+ Save the connection username in the registry
- Gem forbindelsesinformationer i registreringsdatabasen
+ Gem forbindelsesinformationer i registreringsdatabasen
+ Save Username
- Gem brugernavn
+ Gem brugernavn
+ &Test Connect
- &Test forbindelse
+ &Test forbindelse
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Gem forbindelsens kodeord i registreringsdatabasen (ADVARSEL: IKKE SIKKER)
+ Gem forbindelsens kodeord i registreringsdatabasen (ADVARSEL: IKKE SIKKER)
+ Save Password
- Gem kodeord
+ Gem kodeord
+ Encrypt packets using simple encryption
- Kryptér pakker med simpel kryptering
+ Kryptér pakker med simpel kryptering
+ Simple Encryption
- Simpel kryptering
+ Simpel kryptering
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Brug estimater for bestemte lagegenskaber, såsom kardinalitet, omrids, osv. (forbedrer ydeevne)
+ Brug estimater for bestemte lagegenskaber, såsom kardinalitet, omrids, osv. (forbedrer ydeevne)
+ Estimate table metadata
- Estimér tabel-metadata
+ Estimér tabel-metadata
+ Search for geometry columns in tables owned by other users
- Søg efter geometrikolonner i tabeller ejet af andre brugere
+ Søg efter geometrikolonner i tabeller ejet af andre brugere
+ Search other users' tables
- Søg andre brugeres tabeller
+ Søg andre brugeres tabeller
SaSourceSelect
+ &Add
- &Tilføj
+ &Tilføj
+ &Set Filter
- &Sæt filter
+ &Sæt filter
+ Wildcard
- Wildcard
+ Wildcard
+ RegExp
- RegExp
+ RegExp
+ All
- Alle
+ Alle
+ Schema
- Skema
+ Skema
+ Table
- Tabel
+ Tabel
+ Type
- Type
+ Type
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Linjefortolkning
+ Linjefortolkning
+ Geometry column
- Geometrikolonne
+ Geometrikolonne
+ Sql
- SQL
+ SQL
+ Are you sure you want to remove the %1 connection and all associated settings?
- Er du sikker på, at du vil fjerne %1-forbindelsen og alle tilknyttede indstillinger?
+ Er du sikker på, at du vil fjerne %1-forbindelsen og alle tilknyttede indstillinger?
+ Confirm Delete
- Bekræft slet
+ Bekræft slet
+ Select Table
- Vælg tabel
+ Vælg tabel
+ You must select a table in order to add a layer.
- Du skal vælge en tabel for at tilføje et lag.
+ Du skal vælge en tabel for at tilføje et lag.
+ Failed to load interface
- Det lykkedes ikke at indlæse grænseflade
+ Det lykkedes ikke at indlæse grænseflade
+ Connection failed
- Forbindelse mislykkedes
+ Forbindelse mislykkedes
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Forbindelse til database %1 mislykkedes. Tjek indstillinger, og prøv igen.
+ Forbindelse til database %1 mislykkedes. Tjek indstillinger, og prøv igen.
SQL Anywhere-fejlkode: %2
Beskrivelse: %3
+ No accessible tables found
- Ingen tilgængelige tabeller fundet
+ Ingen tilgængelige tabeller fundet
+ Database connection was successful, but no tables containing geometry columns were %1.
- Databaseforbindelse lykkedes, men ingen tabeller, som indeholdt geometrier, var %1.
+ Databaseforbindelse lykkedes, men ingen tabeller, som indeholdt geometrier, var %1.
+ found
- fundet
+ fundet
+ found in your schema
- fundet i dit skema
+ fundet i dit skema
SaSourceSelectBase
+ Add SQL Anywhere layer
- Tilføj SQL Anywhere-lag
+ Tilføj SQL Anywhere-lag
+ SQL Anywhere Connections
- SQL Anywhere-forbindelser
+ SQL Anywhere-forbindelser
+ Delete
- Slet
+ Slet
+ Edit
- Redigér
+ Redigér
+ New
- Ny
+ Ny
+ Connect
- Forbind
+ Forbind
+ Search options
- Søgemuligheder
+ Søgemuligheder
+ Search
- Søg
+ Søg
+ Search mode
- Søgetilstand
+ Søgetilstand
+ Search in columns
- Søg i kolonner
+ Søg i kolonner
SaveAsPythonScriptAction
I/O error
- I/O-fejl
+ I/O-fejl
Unable to save edits. Reason:
%s
- Kan ikke gemme rettelser. Årsag:
+ Kan ikke gemme rettelser. Årsag:
%s
@@ -54231,20 +53915,24 @@ Beskrivelse: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Tilføj SQL Anywhere-lag...
+ Tilføj SQL Anywhere-lag...
+ Store vector layers within a SQL Anywhere database
- Gem vektorlag i en SQL Anywhere-database
+ Gem vektorlag i en SQL Anywhere-database
+ Invalid Layer
- Ugyldigt lag
+ Ugyldigt lag
+ %1 is an invalid layer and cannot be loaded.
- %1 er et ugyldigt lag og kan ikke indlæses.
+ %1 er et ugyldigt lag og kan ikke indlæses.
@@ -54272,7 +53960,7 @@ Beskrivelse: %3
Open Library
-
Symbols in group
-
Offset along line
-
Form
-
Gradient colors
-
Two color
- To farver
+
Color ramp
- Farveskala
+
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Blur strength
-
Offset X,Y
-
Data defined properties...
- Datadefinerede egenskaber...
+
@@ -55033,7 +54721,7 @@ Beskrivelse: %3
Join style
- Join-stilart
+
XML Request / Response
-
Request
-
Response
-
@@ -55582,7 +55270,7 @@ Kør topologicheck igen.
context_help
- <h3>Database connection</h3>
<h3>Databaseforbindelse</h3>
@@ -55814,7 +55502,7 @@ der er beskrevet og illustreret på <a href="http://en.wikipedia.org/wik
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55824,7 +55512,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55875,7 +55563,7 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
<h3>Brugerdefineret CRS</h3>
Hvis QGIS ikke har det CRS, du skal bruge, kan du definere et brugerdefineret CRS. <p>
@@ -55908,7 +55596,7 @@ At definere et brugerdefineret CRS kræver en god forståelse for Proj.4-projekt
<table>
<tr>
<td>
- <p align='justify'>
+ <p align='justify'>
The QGIS Python Console is an interactive shell for the python command executions.
It also has a python file editor that allows you to edit and save your python scripts.
Both console and editor are based on PyQScintilla2 package.<br>
@@ -55964,7 +55652,7 @@ At definere et brugerdefineret CRS kræver en god forståelse for Proj.4-projekt
</tr>
</table>
<b><i>Toolbar:</i></b>
- <table width="100%" id='toolbarConsole'>
+ <table width="100%" id='toolbarConsole'>
<tr>
<td><img src="qrc:/images/themes/default/console/iconClearConsole.png" /></td>
<td colspan="2">Clear python console</td>
@@ -56059,12 +55747,12 @@ that will be automatically deleted after running.</li>
<br>
<li><label>Using prepared APIs file:</label> If checked the *.pap file will be used for code completion. To generate a prepared APIs file you have to load least an *.api file and then compile it by clicking on <label>Compile Apis...</label> button.</li>
</ul>
-<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
- <b>Note:</b> To save the state of console's widgets you have to close the Python Console
+<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
+ <b>Note:</b> To save the state of console's widgets you have to close the Python Console
from the close button. This allows you to save the geometry to be restored to the next start.
</p>
-
+ <h3>Create a New SQL Anywhere Connection</h3>
This dialog allows you to define the settings for a connection to a
SQL Anywhere database.
@@ -57156,11 +56845,11 @@ SQL Anywhere database.
<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
-<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
</ul>
- <h3>Opret en ny SQL Anywhere-forbindelse</h3>
+ <h3>Opret en ny SQL Anywhere-forbindelse</h3>
Denne dialog tillader dig at definere indstillingerne for en forbindelse til en SQL Anywhere-database.
<p>
<ul>
@@ -57198,7 +56887,7 @@ Denne dialog tillader dig at definere indstillingerne for en forbindelse til en
The open vector layer dialog is used to add vector data to the QGIS map view. Vector data are spatial data described using geometries of points, lines and polygons (enclosed areas).</p>
QGIS supports vector data in a number of formats, including those supported by the OGR library data provider plugin, such as ESRI shape files, MapInfo MIF (interchange format) and MapInfo TAB (native format).</p>
QGIS supports PostGIS layers in a PostgreSQL database and SpatiaLite layers. Support for additional data types (eg. delimited text) is provided by additional data provider plugins. A list of OGR supported vector formats can be found in Appendix A.1 of the User Guide.</p>
-Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
+Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
<h3>Åbn vektorlag-dialog</h3>
@@ -57286,10 +56975,10 @@ It is possible to check how often QGIS will download the list and update informa
from the available repositories.
</p>
<p>
-By checking the 'Show experimental plugins' checkbox, all plugins will be shown
-in the lists, even the ones that are considered 'experimental' by the author.
+By checking the 'Show experimental plugins' checkbox, all plugins will be shown
+in the lists, even the ones that are considered 'experimental' by the author.
-<table border=1 width='95%' align='center'><tr><td>
+<table border=1 width='95%' align='center'><tr><td>
Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
</td></tr></table>
@@ -57444,7 +57133,7 @@ Define placement algorithm for labels. Choose between <label>central point
In the <label>Digitizing</label> tab you can define settings for digitizing line width and color.
<h5>Snapping</h5>
Here you can define a general, project wide snapping tolerance. <p>
-You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
+You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
A layer based snapping tolerance can be defined by choosing <label>Settings</label> (or <label>File</label>) > <label>Project Properties...</label>. In the <label>General</label> tab, section <label>Digitize</label> you can click on <label>Snapping options...</label> to enable and adjust snapping mode and tolerance on a layer basis.
<h5>Vertex markers</h5>
You can define marker style as <label>Semi transparent circle</label>, <label>Cross</label> or <label>None</label> and size; you can also set showing markers only for selected features.
@@ -57464,7 +57153,7 @@ Informs you about active system locale. To change it tick <label>Override
</a>
Tick <label>Use proxy for web access</label> to define host, port, user, and password.
-
+ <h3>Add SQL Anywhere Tables</h3>
This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
<p>
@@ -57532,7 +57222,7 @@ To filter a layer before adding it to the map, either double click on its name o
</a>
Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
- <h3>Add SQL Anywhere-tabeller</h3>
+ <h3>Add SQL Anywhere-tabeller</h3>
Denne dialog lader dig tilføje SQL Anywhere-lag (tabeller med en geometrikolonne) til QGIS-kortkortkanvasset.
<p>
<a href="#connect">Forbindelser</a><br/>
@@ -57711,7 +57401,7 @@ It is safer to use an explicit coding if the QGIS project needs to be portable.
or degrees/minutes. QGIS is quite permissive in its interpretation of degrees/minutes/seconds.
A valid DMS coordinate will contain three numeric fields with an optional hemisphere prefix or suffix
(N, E, or + are positive, S, W, or - are negative). Additional non numeric characters are
- generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
+ generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
</li>
</ul>
<p>For well known text geometry the following options apply:</p>
@@ -57761,8 +57451,8 @@ are escaped.</p>
(that is, to stop it being treated as a new line, delimiter, or quote character).
</p>
<p>Escape characters that are also quote characters have much more limited effect. They only apply within quotes and only escape themselves. For example, if
-<tt>'</tt> is a quote and escape character, then the string
-<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
+<tt>'</tt> is a quote and escape character, then the string
+<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
</p>
@@ -58551,7 +58241,7 @@ For support, send en mail til scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -59319,7 +59009,7 @@ Plugin vil ikke blive slået til.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -59335,9 +59025,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
<h3>Funktionen week()</h3>
@@ -59362,7 +59052,7 @@ fra et <code>Interval</code>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -59387,7 +59077,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
@@ -59423,7 +59113,7 @@ returnere et resultat.
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -59437,7 +59127,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
<h3>Funktionen right()</h3>
@@ -59458,7 +59148,7 @@ Returnerer en delstreng, som indeholder <i>n</i> tegn af strengen st
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -59469,7 +59159,7 @@ Denne gruppe indeholder funktioner til at manipulere farver
- <h3>length() function</h3>
Returns the length of a string.
@@ -59482,7 +59172,7 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
<h3>Funktionen length()</h3>
Returnerer længden af en streng.
@@ -59500,7 +59190,7 @@ Returnerer længden af en streng.
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -59513,7 +59203,7 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
<h3>Funktionen upper()</h3>
Konverterer en streng til store bogstaver.
@@ -59531,9 +59221,9 @@ Konverterer en streng til store bogstaver.
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -59543,8 +59233,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
<h3>Funktionen bbox</h3>
Returnerer 1 hvis geometrierne spatielt overlapperif den definerede bbox (bounding box) og 0 hvis dette ikke er tilfældet.
@@ -59562,7 +59252,7 @@ b → geometry
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -59576,7 +59266,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
<h3>Funktionen left()</h3>
@@ -59597,7 +59287,7 @@ Returnerer en delstreng, som indeholder <i>n</i> tegn startende fra
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -59626,7 +59316,7 @@ NB: Denne funktion vil kun være tilgængelig i nogle sammenhænge og giver elle
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -59659,9 +59349,9 @@ Runder et tal opad.
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -59672,7 +59362,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
<h3>Funktionen toreal()</h3>
Konverterer en streng til et flydende tal. Intet ændres, hvis værdien ikke kan konverteres til et flydende tal (fx '123.56asd' er ugyldigt). Ved gemning afrundes tallet, hvis præcisionen er mindre end resultatet af konverteringen.
@@ -59690,7 +59380,7 @@ Konverterer en streng til et flydende tal. Intet ændres, hvis værdien ikke kan
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -59717,7 +59407,7 @@ Henter et x-koordinat fra det aktuelle objekt
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -59746,14 +59436,14 @@ Ingen
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -59762,8 +59452,8 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
<h3>strpos() function</h3>
Returnerer indekset (positionen) af et regulært udtryk i en streng.
@@ -59785,7 +59475,7 @@ Returnerer -1 hvis udtrykket ikke findes.
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -59822,7 +59512,7 @@ Denne funktion tager 2 argumenter.
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -59839,10 +59529,10 @@ None
<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -59858,10 +59548,10 @@ None
<pre>$atlasfeatureid = $id</pre>
-
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59875,10 +59565,10 @@ geom → a geometry
<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -59911,7 +59601,7 @@ Runder et tal nedad
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59925,12 +59615,12 @@ geom → a geometry
<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -59941,7 +59631,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
<h3>Funktionen toint()</h3>
Konverterer en streng til et heltal. Intet ændres, hvis værdien ikke kan konverteres til heltal (fx '123asd' er ugyldigt).
@@ -59959,7 +59649,7 @@ Konverterer en streng til et heltal. Intet ændres, hvis værdien ikke kan konve
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -59986,7 +59676,7 @@ Henter y-koodinatet fra det aktuelle objekt
- <h3>tostring() function</h3>
Converts a number to string.
@@ -59999,7 +59689,7 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
<h3>Funktionen tostring()</h3>
Konverterer et tal til en streng.
@@ -60017,7 +59707,7 @@ Konverterer et tal til en streng.
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -60046,7 +59736,7 @@ Ingen
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -60081,7 +59771,7 @@ argumenter for at afgøre resultatets kvadrant
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -60110,7 +59800,7 @@ Returnerer sinus på en vinkel.
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -60126,9 +59816,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
<h3>Funktionen month()</h3>
@@ -60182,7 +59872,7 @@ Ingen
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -60198,9 +59888,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
<h3>Funktionen day()</h3>
@@ -60225,12 +59915,12 @@ fra et <code>Interval</code>
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -60254,7 +59944,7 @@ Konverterer en streng til en Qt-datotype.
<code>todate('2012-05-04') → 2012-05-04</code><br>
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60271,7 +59961,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
<h3>Funktionen lpad()</h3>
Returnerer en streng med den angivne længde udfyldt
@@ -60293,7 +59983,7 @@ med fyldtegnet, hvor den originale strengværdi står først.
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -60322,14 +60012,14 @@ Returnerer arccos af en værdi i radianer.
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60345,7 +60035,7 @@ indsat, dvs. når forespørgsler opbygges.
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -60382,7 +60072,7 @@ Denne funktion tager 2 argumenter.
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -60391,14 +60081,14 @@ Denne gruppe indeholder funktioner, som arbejder på geometriobjekter, fx længd
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60414,7 +60104,7 @@ indsat, dvs. når forespørgsler opbygges.
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -60443,7 +60133,7 @@ Ingen
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -60472,7 +60162,7 @@ Returnerer eksponentialfunktionen af en værdi.
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60489,7 +60179,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
<h3>Funktionen rpad()</h3>
@@ -60513,7 +60203,7 @@ med fyldtegnet, hvor den originale strengværdi står sidst.
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -60558,7 +60248,7 @@ brug <code>round(decimal)</code> for at afrunde til nærmeste heltal
- <h3>$now function</h3>
Returns the current date and time
@@ -60587,7 +60277,7 @@ Ingen
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -60602,12 +60292,12 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
-
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -60620,8 +60310,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -60668,7 +60358,7 @@ de accelererer, som inputværdierne når domænemaksimum. Mindre eksponenter (mi
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -60680,7 +60370,7 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
<h3>Funktionen convexHull</h3>
Returnerer den konvekse skal af et par geometrier. Den er lig med den minimale konvekse skal, som inkluderer alle geometrier i parret.
@@ -60697,7 +60387,7 @@ a → geometry
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -60709,7 +60399,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
<h3>Funktionen union</h3>
Returnerer en geometri som repræsenterer foreningsmængden af geometrierne.
@@ -60726,7 +60416,7 @@ b → geometry
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60740,10 +60430,10 @@ geom → a geometry
<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60757,10 +60447,10 @@ geom → a geometry
<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60774,10 +60464,10 @@ geom → a geometry
<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -60789,8 +60479,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Funktionen contains</h3>
Returnerer true hvis b helt er omsluttet af a. Dvs. b er en sand delmængde af a
@@ -60808,7 +60498,7 @@ geometry → geometry
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -60823,13 +60513,13 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -60845,12 +60535,12 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
-
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -60867,12 +60557,12 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
-
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -60884,7 +60574,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
<h3>Funktionen intersection</h3>
Returner en geometri som repræsenterer fællesdelen (overlapsdelen) af geometri a og geometri b.
@@ -60901,7 +60591,7 @@ geometry → geometry
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -60911,22 +60601,22 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
may not give the expected results if you move your Quantum project.
</p>
-
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -60937,8 +60627,8 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
@@ -60966,7 +60656,7 @@ None
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -60981,12 +60671,12 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
-
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -60997,9 +60687,9 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
<h3>udtrykket ILIKE</h3>
Returnerer 1 hvis den første parameter matcher mønsteret fra anden parameter uden hensyntagen til store og små bogstaver. LIKE kan bruges ligesom ILIKE men under hensyntagen til store og små bogstaver. Kan også benyttes til tal.
@@ -61017,7 +60707,7 @@ None
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -61028,9 +60718,9 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
<h3>Udtrykket LIKE</h3>
Returnerer 1 hvis det første argument matcher mønsteret i andet argument under hensyntagen til store og små bogstaver. Kan også benyttes til tal.
@@ -61048,7 +60738,7 @@ None
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61062,10 +60752,10 @@ geom → a geometry
<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -61076,7 +60766,7 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
<h3>Funktionen geomFromGML</h3>
@@ -61094,7 +60784,7 @@ text → GML udtryk for en geometri
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -61103,7 +60793,7 @@ Denne gruppe indeholder funktioner til at håndtere dato- og tidsdata.
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -61115,8 +60805,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
<h3>Funktionen combine</h3>
Returnerer kombinationen (additionen) af geometri a og geometri b.
@@ -61134,9 +60824,9 @@ geometry → geometry
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -61146,8 +60836,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>intersects funktion</h3>
Returnerer 1 hvis geometrierne spatielt skærer hinanden (har en eller flere delflader tilfælles) og 0 hvis det ikke er tilfældet.
@@ -61165,7 +60855,7 @@ b → geometry
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -61208,7 +60898,7 @@ Begrænser en inputværdi til et angivet interval.
{3>?} {3>?} {4>?} {4>?} {4>?} {4>?} {4>?} {4>?} {1,5,10)?} {5 ?} {1 ?} {10 ?} {1,0,10)?} {1 ?} {1,?} {1)?} {1,11,10)?} {10 ?} {10,?} {10)?}
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -61220,8 +60910,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
<h3>Funktionen disjoint</h3>
Returnerer 1 hvis geometrier er disjunkte (dvs de ovehovedet ikke overlapper).
@@ -61239,7 +60929,7 @@ b → geometry
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -61250,7 +60940,7 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
<h3>Funktionen geomFromWKT</h3>
@@ -61268,7 +60958,7 @@ text → Well-Known Text (WKT) udtryk for en geometri
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -61299,43 +60989,7 @@ b → buffer afstand
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -61364,10 +61018,10 @@ Ingen
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -61395,25 +61049,7 @@ None
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -61425,8 +61061,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Funktionen crosses</h3>
Returnerer 1 hvis de to geometrier har nogle dele tilfælles men ikke er identiske.
@@ -61444,7 +61080,7 @@ geometry → geometry
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -61471,7 +61107,7 @@ a → geometry
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -61483,8 +61119,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>Funktion touches</h3>
Returnerer 1 hvis geometrierne har mindst eet punkt på omkredsen (kantpunkt) til fælles, men hvor deres indersider ikke har dele til fælles.
@@ -61502,7 +61138,7 @@ b → geometry
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -61514,8 +61150,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Funktionen overlaps</h3>
Returnerer 1 hvis geometrierne deler flade(r) og har den samme dimesionaltet, men hvor de ikke helt ens.
@@ -61533,7 +61169,7 @@ b → geometry
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -61564,7 +61200,7 @@ None
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -61593,7 +61229,7 @@ None
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -61624,7 +61260,7 @@ None
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -61653,7 +61289,7 @@ b → geometry
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -61665,8 +61301,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
<h3>Funktionen within</h3>
Returnerer 1 hvis geometri a er helt indesluttet i geometri b. Ellers 0
@@ -61683,7 +61319,7 @@ geometry → geometry
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -61720,7 +61356,7 @@ $map → "canvas" (fra hovedvinduet i QGIS)</pre>
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -61732,7 +61368,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
<h3>Funktionen distance</h3>
Returnerer minimumsafstanden (baseret på kooordinatsystemet) mellem 2 geometrier i i distanceenheden for projektionen.
@@ -61749,7 +61385,7 @@ b → geometry
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -61761,7 +61397,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
<h3>Funktionen difference</h3>
Returnerer en geometri som repræsenterer de dele af geometri a, som ikke skærer (overlappes af) geometri b.
@@ -61778,7 +61414,7 @@ geometry → geometry
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -61789,8 +61425,8 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
@@ -61811,7 +61447,7 @@ None
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -61823,7 +61459,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
<h3>Funktionen symDifference</h3>
Returnerer en geometri som repræsenterer summen af de dele af a og b som ikke skærer hinanden.
@@ -61840,7 +61476,7 @@ geometry → geometry
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -61869,12 +61505,12 @@ Ingen
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -61898,7 +61534,7 @@ Konverterer en streng til en intervaltype. Kan bruges til at trække dage, timer
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -61914,10 +61550,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
<h3>Funktionen hour()</h3>
@@ -61943,7 +61579,7 @@ fra et <code>Interval</code>
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -61959,7 +61595,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
<h3>Funktionen color_hsla()</h3>
Returnerer en strengrepræsentation af en farve baseret på dens farvetone-, mætning-, lysheds- og alfa(transparens)-attributter
@@ -61980,7 +61616,7 @@ Returnerer en strengrepræsentation af en farve baseret på dens farvetone-, mæ
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -62007,7 +61643,7 @@ Ingen
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
@@ -62016,12 +61652,12 @@ Denne gruppe indeholder funktioner, som arbejder på postidentifikatorer.
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -62045,7 +61681,7 @@ Konverterer en streng til en Qt-tidstype.
<code>totime('12:30:01') → 12:30:01</code><br>
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -62060,7 +61696,7 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
<h3>Funktionen replace()</h3>
Returnerer en streng med angivne streng erstattet.
@@ -62080,7 +61716,7 @@ Returnerer en streng med angivne streng erstattet.
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
@@ -62089,7 +61725,7 @@ Denne gruppe indeholder funktioner til at håndtere betingede tjek i udtryk.
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -62118,7 +61754,7 @@ abs(<i>værdi</i>)<br>
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -62149,7 +61785,7 @@ Returnerer den højeste værdi i et sæt af værdier.
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -62178,7 +61814,7 @@ Returnerer kvadratroden af en værdi
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
@@ -62187,7 +61823,7 @@ Denne gruppe indeholder funktioner, som arbejder på betingelser.
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -62205,7 +61841,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
<h3>Funktionen color_cmyka()s</h3>
@@ -62227,7 +61863,7 @@ Returnerer en strengrepræsentation af en farve baseret på dens cyan-, magenta-
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -62264,7 +61900,7 @@ til.
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -62280,9 +61916,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
<h3>Funktionen year()</h3>
@@ -62307,7 +61943,7 @@ fra et <code>Interval</code>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -62332,7 +61968,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
@@ -62366,7 +62002,7 @@ returnerer et resultat.
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -62403,7 +62039,7 @@ Funktionen tager 2 argumenter.
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -62417,10 +62053,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -62463,7 +62099,7 @@ Transformerer en given værdi fra et inputdomæne til et outputinterval vha. lin
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -62476,7 +62112,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
<h3>Funktionen trim()</h3>
Fjerner alle foranstillede og bagvedstillede mellemrum (mellumrumstegn, tabulator osv.) fra en streng.
@@ -62494,7 +62130,7 @@ Fjerner alle foranstillede og bagvedstillede mellemrum (mellumrumstegn, tabulato
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -62510,10 +62146,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
<h3>Funktionen minute()</h3>
@@ -62539,7 +62175,7 @@ fra et <code>Interval</code>
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -62568,9 +62204,9 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
<h3>Funktionen age()</h3>
@@ -62608,7 +62244,7 @@ use <code>day</code> for at udtrække antal dage<br>
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -62643,7 +62279,7 @@ Denne funktion tager 1 argument.
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
@@ -62652,7 +62288,7 @@ Denne gruppe indeholder funktioner til at konvertere fra en datatype til en ande
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -62681,7 +62317,7 @@ Returnerer cosinus på en vinkel
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -62690,7 +62326,7 @@ Denne gruppe indeholder operatorer, fx + - *
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -62706,10 +62342,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
<h3>Funktionen second()</h3>
@@ -62735,7 +62371,7 @@ fra et <code>Interval</code>
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -62764,7 +62400,7 @@ Returnerer arctangens af en værdi i radianer.
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -62791,7 +62427,7 @@ Ingen
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -62805,7 +62441,7 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
<h3>Funktionen title()</h3>
Konverterer alle ord i en streng til, at alle ord er med små bogstaver med
@@ -62824,7 +62460,7 @@ stort startbogstav.
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -62838,7 +62474,7 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
<h3>Funktionen regexp_match()</h3>
Returnerer true hvis en vilkårlig del af en streng matcher det angivne regulære udtryk.
@@ -62856,7 +62492,7 @@ Returnerer true hvis en vilkårlig del af en streng matcher det angivne regulær
regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
- <h3>substr() function</h3>
Return a part of a string
@@ -62871,7 +62507,7 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
<h3>Funktionen substr()</h3>
Returnerer en del af en streng
@@ -62891,12 +62527,12 @@ Returnerer en del af en streng
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -62922,7 +62558,7 @@ Formaterer en streng med angivne argumenter.
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -62937,7 +62573,7 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
<h3>Funktionen regexp_replace()</h3>
Returnerer en streng med det angivne regulære udtryk erstattet.
@@ -62956,7 +62592,7 @@ Returnerer en streng med det angivne regulære udtryk erstattet.
regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -62970,7 +62606,7 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
<h3>Funktionen regexp_substr()</h3>
Returner den del af strengen, som matcher med et angivet regulært udtryk.
@@ -62988,7 +62624,7 @@ Returner den del af strengen, som matcher med et angivet regulært udtryk.
regexp_substr('abc123','(\\d+)') → '123'</p>
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -63017,7 +62653,7 @@ Ingen
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -63034,7 +62670,7 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
<h3>Funktionen color_rgba()</h3>
@@ -63056,7 +62692,7 @@ Returnerer en strengrepræsentation af en farve baseret på dens rød-, grøn-,
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -63085,7 +62721,7 @@ Ingen
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
@@ -63094,7 +62730,7 @@ Denne gruppe indeholder matematiske funktioner, fx kvadratrod, sinus og cosinus
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -63125,7 +62761,7 @@ Returnerer den laveste værdi i et sæt af værdier.
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -63136,7 +62772,7 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
<h3>Funktionen lower()</h3>
Konverterer en streng til små bogstaver.
@@ -63152,7 +62788,7 @@ Konverterer en streng til små bogstaver.
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -63181,7 +62817,7 @@ Ingen
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
@@ -63190,7 +62826,7 @@ Denne gruppe indeholder funktioner, som arbejder på strenge, fx erstat, konvert
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -63203,7 +62839,7 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
<h3>Funktionen concat()</h3>
Sætter flere strenge sammen til én.
@@ -63221,7 +62857,7 @@ Sætter flere strenge sammen til én.
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -63238,8 +62874,8 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
<h3>Funktionen coalesce()</h3>
@@ -63264,7 +62900,7 @@ Funktionen kan tage et vilkårligt antal parametre.
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -63293,12 +62929,12 @@ Returner arcsin af en værdi i radianer.
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -63322,12 +62958,12 @@ Konverterer en stregn til en Qt-datetime-type.
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -63358,14 +62994,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -63384,14 +63020,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -63496,7 +63132,7 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
<h3>Funktionen format_date()</h3>
Formaterer en dato-type eller streng til et tilpasset strengformat. Bruger Qt-dato-tidsformats-strenge Se <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
@@ -63675,7 +63311,7 @@ Formaterer en dato-type eller streng til et tilpasset strengformat. Bruger Qt-da
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -63704,7 +63340,7 @@ Returnerer tangens af en vinkel.
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -63733,7 +63369,7 @@ Ingen
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -63768,7 +63404,7 @@ Denne funktion tager 1 argument.
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -63784,7 +63420,7 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
<h3>Funktionen color_hsva()</h3>
Returnerer en strengrepræsentation af en farve baseret på dens farvetone-, mætning-, værdi- og alfa(transparens)-attributter
@@ -66053,19 +65689,19 @@ Returnerer en strengrepræsentation af en farve baseret på dens farvetone-, mæ
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -66351,12 +65987,12 @@ Returnerer en strengrepræsentation af en farve baseret på dens farvetone-, mæ
Form
-
...
- ...
+
-
+
\ No newline at end of file
diff --git a/i18n/qgis_el.ts b/i18n/qgis_el.ts
index 35bc3976fd2..840fe4af451 100644
--- a/i18n/qgis_el.ts
+++ b/i18n/qgis_el.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -71,7 +69,7 @@
&Coordinate Capture
-
Βιβλιοθήκη:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> δεν υπάρχει ο πίνακας geometry_columns! Ο πίνακας είναι απαραίτητος για την απαρίθμηση πινάκων σε πλήθος εφαρμογών GIS.
@@ -416,13 +414,13 @@ This table is essential for many GIS applications for enumeration of tables.Δέσμη ενεργειών εντολών (Scripts):
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning>Η έκδοση των εγκατεστημένων scipts δεν είναι ίδια των διαθέσιμων scipts.
Αυτό ίσως οδηγήσει σε λανθασμένη αναβάθμιση της PostGIS.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Ο χρήστης δεν έχει δικαιώματα ανάγνωσης των περιεχομένων του πίνακα geometry_columns! Ο πίνακας είναι απαραίτητος για την απαρίθμηση πινάκων σε πλήθος εφαρμογών GIS.
@@ -2088,7 +2086,7 @@ This may cause unexpected results.
πεδίο μήκους
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Αδύνατη η διαγραφή υπάρχοντος αρχείου shapefile
%s
@@ -2389,47 +2387,24 @@ Are you sure you want to proceed?
απομάκρυνση από την τρέχουσα επιλογή
- Select by location
Επιλέξτε με βάση την τοποθεσία
- Select features in:
Επιλέξτε τα χαρακτηριστικά του:
- that intersect features in:
που διασταυρώνονται χαρακτηριστικά σε:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Τροποποίηση τρέχουσας επιλογής από:
+ Τροποποίηση τρέχουσας επιλογής από:
Use selected features only
- Χρησιμοποιείστε μόνο επιλεγμένα χαρακτηριστικά
+ Χρησιμοποιείστε μόνο επιλεγμένα χαρακτηριστικά
Please specify select layer
@@ -2631,7 +2606,7 @@ Are you sure you want to proceed?
Get scripts and models
-
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -3003,7 +2978,7 @@ geometry column - column with unique integer values
id_hist
-
time_start
-
time_end
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
-
Select the mask file
-
Select the input directory with files to Warp
@@ -3831,12 +3806,12 @@ Disable the "Use intersected extent" option to have a nonempty output.
GDAL help path
-
GDAL data path
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to python modules.
-
Useful to open local GDAL documentation instead of online help
when pressing on the tool dialog's Help button.
-
Select directory with GDAL executables
@@ -3956,7 +3931,7 @@ when pressing on the tool dialog's Help button.
Allow projection difference
-
Clipping mode
-
Mask layer
-
&Output file for contour lines (vector)
-
ELEV
-
Band to convert
-
Slope
-
Fill Nodata
-
Search distance
-
Validity mask
-
Do not use the default validity mask
-
&Z Field
-
Suppress GCP printing
-
DN
-
Use mask
-
Sieve
- Κόσκινο
+
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
-
Srcwin
-
Prjwin
-
Sds
-
Cubic spline
-
MB
-
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
- Προς το παρόν, το QGIS δεν επιτρέπει την ταυτόχρονη πρόσβαση από διαφορετικά threads στην ίδια πηγή δεδομένων. Επιβεβαιώστε ότι ο πίνακας περιγραφικών χαρακτηριστικών είναι κλειστός. Συνέχεια?
+
Cancel
@@ -5249,22 +5224,22 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
No valid layers found!
-
Advanced options cannot be enabled.
-
Invalid output filename
-
Please enter a valid output file path and name.
-
Quartic (biweight)
-
Triangular
-
Uniform
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
Symbol layer type
-
MainWindow
- &Edit
&Επεξεργασία
@@ -5503,157 +5478,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Επιλογή
- Measure
Μέτρηση
- &Decorations
&Διακοσμήσεις
- &Layer
Επ&ίπεδο
- New
Νέο
- &Plugins
&Πρόσθετα
- &Help
Βο&ήθεια
- &Settings
Ρυθμί&σεις
- &Raster
&Raster
- Vect&or
&Διανύσματα
- &OpenStreetMap
&OpenStreetMap
- File
Αρχείο
- Manage Layers
Διαχειριστείτε Επίπεδα Layers
- Digitizing
Ψηφιοποίηση
- Advanced Digitizing
Προηγμένη Ψηδιοποίηση
- Map Navigation
Χάρτης Πλοήγησης
- Attributes
Χαρακτηριστικά
- Plugins
Πρόσθετα
- Help
Βοήθεια
- Raster
Raster
- Label
Ετικέτα
- Vector
Διάνυσμα
- Database
Βάση Δεδομένων
- Web
Web
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Αποθήκευση ως εικόνα...
- &New Print Composer
&Νέα σύνθεση εκτύπωσης
- Ctrl+P
Ctrl+P
- Composer Manager...
Διαχείριση Συνθέσεων...
@@ -5673,1123 +5648,1115 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Νέο βάσει Προτύπου
- Preview Mode
-
- Paste Features as
Επικόλληση αντικειμένων ως
- &New
&Νέο
- &Open...
&Άνοιγμα...
- &Save
Αποθ&ήκευση
- Save &As...
Αποθήκευση &Ως...
- Exit QGIS
Έξοδος από το QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
&Αναίρεση
- Ctrl+Z
Ctrl+Z
- &Redo
Επανάληψη (&Redo)
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Κόψτε Χαρακτηριστικά
- Ctrl+X
Ctrl+X
- Copy Features
Αντιγραφή Χαρακτηριστικών
- Ctrl+C
Ctrl+C
- Paste Features
Επικόλληση Χαρακτηριστικών
- Ctrl+V
Ctrl+V
- Add Feature
Προσθήκη Αντικειμένου
- Ctrl+.
Ctrl+.
- Move Feature(s)
Μετακίνηση χαρακτηριστικού(ών)
- Reshape Features
Αλλαγη σχήματος στοιχείων
- Split Features
Χωρισμός στοιχείων
- Split Parts
Διαχωρισμός τμημάτων
- Delete Selected
Διαγραφή επιλεγμένων
- Add Ring
Προσθήκη Δακτυλίου
- Add Part
Προσθήκη Τμήματος
- Simplify Feature
Απλοποίηση Στοιχείου
- Delete Ring
Διαγραφη Δακτυλίου
- Delete Part
Διαγραφή τμήματος
- Merge Selected Features
Συγχώνευση Επιλεγμένων
- Merge Attributes of Selected Features
Συγχώνευση Ιδιοτήτων Επιλεγμένων Στοιχείων
- Node Tool
Εργάλειο Κόμβου
- Rotate Point Symbols
Περιστροφή Συμβόλων Σημείων
- Snapping Options...
Επιλογές προσκύρωσης (Snapping)...
- Pan Map
Μετατόπιση επί χάρτου
- Zoom In
Μεγέθυνση
- Ctrl++
Ctrl++
- Zoom Out
Σμίκρυνση
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Επιλογή ενός αντικειμένου
+ Επιλογή ενός αντικειμένου
+ Select Features by Rectangle
- Επιλογή με Ορθογώνιο
+ Επιλογή με Ορθογώνιο
- Select Features by Polygon
Επιλογή με πολύγωνο
- Select Features by Freehand
Επιλογή με Ελεύθερη Σχεδίαση
- Select Features by Radius
Επιλογή με κύκλο
- Deselect Features from All Layers
Αποεπιλογη όλων από Όλα τα επίπεδα
- Identify Features
Προσδιορίστε Χαρακτηριστικά
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Μέτρηση Γραμμής
- Ctrl+Shift+M
Ctrl+Shift+Μ
- Measure Area
Μέτρηση Περιοχής
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Μέτρηση Γωνίας
- Zoom Full
Πλήρης Μεγέθυνση
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Ζουμ σε Layer
- Zoom to Selection
Zoom στην επιλογή
- Ctrl+J
Ctrl+J
- Zoom Last
Τελευταία zoom
- Zoom Next
Zoom στο επόμενο
- Zoom Actual Size
Zoom πραγματικού μεγέθους
- Zoom to Native Pixel Resolution
Zoom στο επίπεδο της ανάλυσης Pixel της εικόνας
- Map Tips
Συμβουλές Χάρτη
- Show information about a feature when the mouse is hovered over it
Δείτε πληροφορίες για ένα χαρακτηριστικό όταν το ποντίκι κινηθεί πάνω του
- New Bookmark...
Νέος σελιδοδεικτης...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Εμφάνισε Σελιδοδείκτες
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Ανανέωση
- Text Annotation
Σχόλια Κειμένου
- Form Annotation
-
- Move Annotation
Μετακίνηση σχολίου
- Labeling
Εισαγωγή ταμπελών
- Layer Labeling Options
-
- New Shapefile Layer...
Νέο επίπεδο Shapefile...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Νέο επίπεδο SpatiaLite...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Υπολογιστής ψηφιδωτού...
- Add Vector Layer...
Προσθήκη Διανυσματικού Επιπέδου...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Προσθήκη Επιπέδου Raster...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Προσθήκη επιπέδου PostGIS...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Προσθήκη Επιπέδου SpatiaLite...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Προσθήκη επιπέδου MSSQL Spatial...
- Add Oracle Spatial Layer...
Προσθήκη επιπέδου Oracle Spatial...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Προσθήκη επιπέδου WMSWMTS...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Ανοίξτε Πίνακα Ιδιοτήτων
- Toggle Editing
Εναλλαγή επεξεργασίας
- Toggles the editing state of the current layer
Εναλλαγή η κατάστασης επεξεργασίας του τρέχοντος επιπεδου
- Save for Selected Layer(s)
Αποθήκευση για το(α) επιλεγμένο(α) Επίπεδο(α)
- Save edits to current layer, but continue editing
Αποθήκευση αλλαγών στο τρέχον επίπεδο, αλλά συνέχιση της επεξεργασίας
- Save As...
Αποθήκευση ως...
- Add from Layer Definition File...
-
- Save As Layer Definition File...
-
- Normal
-
- Normal preview mode
-
- Simulate Photocopy (Grayscale)
-
- Simulate photocopy (grayscale)
-
- Simulate Fax (Mono)
-
- Simulate fax (mono)
-
- Simulate Color Blindness (Protanope)
-
- Simulate color blindness (protanope)
-
- Simulate Color Blindness (Deuteranope)
-
- Simulate color blindness (deuteranope)
-
- Set Scale Visibility of Layer(s)
-
- Remove Layer(s)
Απαλοιφή επιπέδου(ων)
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Ορίστε το Σύστημα Αναφοράς Συντεταγμένων (ΣΑΣ) επιπέδου(ων)
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Ορισμός ΣΑΣ Έργου από Επίπεδο
- Properties...
Ιδιότητες...
- Query...
Επερώτηση...
- Add to Overview
Προσθήκη στην Επισκόπηση
- Add All to Overview
Προσθήκη όλων στην Επισκόπηση
- Remove All from Overview
-
- Show All Layers
Εμφάνιση όλων των επιπέδων
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Απόκρυψη όλων των επιπέδων
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Διαχείριση και Εγκατάσταση Προσθέτων...
- Open Field Calculator
-
- Add Delimited Text Layer...
-
- Add Delimited Text Layer
-
- New Vector Layer
Νέο Διανυσματικό Επίπεδο
- Paste features in clipboard into a new OGR vector layer.
-
- New Memory Vector Layer
-
- Paste features in clipboard into a new memory vector layer.
-
- Toggle Full Screen Mode
Εναλλαγή πλήρους οθόνης
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Ιδιότητες έργου...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Επιλογές ...
- Custom CRS...
Ιδιοποιημένο ΣΑΣ...
- Configure shortcuts...
Ρύθμιση Συντομεύσεων...
- Local Histogram Stretch
Τοπική Επιμήκυνση του ιστογράμματος
- Stretch histogram of active raster to view extents
Επιμήκυνση του ιστογράμματος του τρέχοντος raster για να δειτε την πληρη έκταση
- Help Contents
Περιεχόμενα Βοήθειας
- F1
F1
- API documentation
Τεκμηρίωση Βοήθειας για το API
- QGIS Home Page
QGIS Οικεία Ιστοσελίδα
- Ctrl+H
Ctrl+H
- Check QGIS Version
Έλεγχος Έκδοσης QGIS
- Check if your QGIS version is up to date (requires internet access)
Ελέγξτε αν QGIS έκδοση σας είναι ενημερωμένα (απαιτεί πρόσβαση στο διαδίκτυο)
- About
Σχετικά
- QGIS Sponsors
Χορηγοί του QGIS
- Move Label
Μετακίνηση ετικέτας
- Rotate Label
Περιστροφή ετικετας
- Rotate Label
Ctl (Cmd) increments by 15 deg.
-
- Change Label
Αλλαγή Ετικέτας
- Style Manager...
Διαχείριση Στυλ...
- Python Console
Python Κονσόλα
- Full histogram stretch
Πλήρης επιμήκυνση ιστογράμματος
- Stretch Histogram to Full Dataset
-
- Customization...
Παραμετροποίηση...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
-
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
-
- Embed layers and groups from other project files
-
- &Copyright Label
&Πνευματικά δικαιώματα
- Creates a copyright label that is displayed on the map canvas.
-
- &North Arrow
&Σύμβολο Βορρά
- "Creates a north arrow that is displayed on the map canvas"
-
- &Scale Bar
&Γραφική κλίμακα
- Creates a scale bar that is displayed on the map canvas
-
- Add WFS Layer...
Προσθήκη επιπέδου WFS...
- Add WFS Layer
Προσθήκη επιπέδου WFS
- Feature Action
-
- Run Feature Action
-
- Pan Map to Selection
Μετακίνηση χάρτη στην επιλογή
- Touch zoom and pan
-
- Offset Curve
-
- Copy style
Αντιγραφή στυλ
- Paste style
Επικόλληση στυλ
- Add WCS Layer...
Προσθήκη επιπέδου WCS...
- &Grid
-
- Grid
-
- Pin/Unpin Labels
-
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
Acts on all editable layers
-
- Highlight Pinned Labels
-
- New Blank Project
Νέο Κενό Έργο
- Local Cumulative Cut Stretch
-
- Local cumulative cut stretch using current extent, default limits and estimated values.
-
- Full Dataset Cumulative Cut Stretch
-
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
-
- Show/Hide Labels
Εμφάνιση/Απόκρυψη Ετικετών
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
Acts on currently active editable layer
-
- Html Annotation
-
- Duplicate Layer(s)
-
- SVG annotation
-
- Save for All Layers
Αποθήκευση Αλλαγών Επιπέδου
- Rollback for All Layers
-
- Cancel for All Layers
Ακύρωση για όλα τα επίπεδα
- Rollback for Selected Layer(s)
-
- Current Edits
Τρέχουσες αλλαγές
- Cancel for Selected Layer(s)
Ακύρωση για το(α) επιλεγμένο(α) Επίπεδο(α)
- Save Layer Edits
Αποθήκευση Αλλαγών Επιπέδου
- Rotate Feature(s)
Περιστροφή Αντικειμένου(ων)
- &Download data
&Μεταφόρτωση δεδομένων
- &Import topology from XML
-
- &Export topology to SpatiaLite
-
- Increase brightness
Αύξηση φωτεινότητας
- Decrease brightness
Μείωση φωτεινότητας
- Increase contrast
Αύξηση αντίθεσης
- Decrease contrast
Μείωση αντίθεσης
- Select By Expression
-
- Select features using an expression
-
- Need commercial support?
-
- DXF Export...
Εξαγωγή σε αρχείο DXF...
- Fill Ring
-
@@ -6797,7 +6764,7 @@ Acts on currently active editable layer
Manage connections
- Διαχείριση συνδέσεων
+
Set global
-
Double click to see full record information
-
Type
- Τύπος
+
Title
- Τίτλος
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
-
Edit
- Επεξεργασία
+
Delete
- Διαγραφή
+
Save
- Αποθήκευση
+
Add default services
-
Load
-
Settings
- Ρυθμίσεις
+
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
- Γίνεται φόρτωση συνδέσεων
+
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
@@ -7232,18 +7199,13 @@ Acts on currently active editable layer
Can't save model
Δεν είναι δυνατή η αποθήκευση του μοντέλου
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
@@ -7261,6 +7223,11 @@ See the log for more information.
Could not open model
Δεν ήταν δυνατό το άνοιγμα του μοντέλου
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
Παράμετροι
@@ -7286,29 +7253,29 @@ See the log for more information.
Create a new Catalogue connection
-
Name
- Όνομα
+
URL
- URL
+
Save connection
- Αποθήκευση σύνδεσης
+
Both Name and URL must be provided
-
Overwrite %s?
-
@@ -7605,7 +7572,7 @@ See the log for more information.
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
@@ -7628,7 +7595,7 @@ See the log for more information.
Compile APIs
-
Saving prepared file...
@@ -7818,7 +7785,7 @@ See the log for more information.
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
@@ -7834,7 +7801,7 @@ See the log for more information.
Object Inspector
-
Open file
@@ -7862,7 +7829,7 @@ See the log for more information.
Import Processing class
-
Enter text to find...
@@ -7898,7 +7865,7 @@ See the log for more information.
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
@@ -7910,7 +7877,7 @@ See the log for more information.
Session and file history cleared successfully.
-
History cleared successfully.
@@ -7934,31 +7901,31 @@ See the log for more information.
Python Console - Command History
-
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
@@ -8044,12 +8011,12 @@ See the log for more information.
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to alloc statement
-
Unable to prepare statement
-
Unable to get statement type
-
Unable to bind value
-
Unable to execute statement
- Αδυναμία εκτέλεσης ερωτήματος
+
@@ -8106,24 +8073,24 @@ See the log for more information.
Estimating normal derivatives...
- minidump written to %1
-
- writing of minidump to %1 failed (%2)
-
- creation of minidump to %1 failed (%2)
-
- Crash dumped
-
Attempting to resolve the classFactory function
-
Loaded %1 (Path: %2)
-
Unable to find the class factory for %1.
-
Plugin %1 did not return a valid type and cannot be loaded
-
Could not open CRS database %1
Error(%2): %3
-
Generated CRS
A CRS automatically generated from layer info get this prefix for description
Παραγόμενο ΣΑΣ
@@ -8279,7 +8247,7 @@ Error(%2): %3
Saved user CRS [%1]
-
Cannot convert '%1' to double
-
Cannot convert '%1' to int
-
Cannot convert '%1' to DateTime
-
Cannot convert '%1' to Date
-
Cannot convert '%1' to Time
-
Cannot convert '%1' to Interval
-
- Cannot convert '%1' to boolean
-
- Domain max must be greater than domain min
-
- Exponent must be greater than 0
-
- Invalid regular expression '%1': %2
-
- Index is out of range
-
- Cannot convert '%1:%2:%3' to color
-
- Cannot convert '%1:%2:%3:%4' to color
-
- "%1" is not a valid color ramp
-
- Cannot convert '%1:%2:%3:%4:%5' to color
-
- function help for %1 missing
-
- Operators
- Τελεστές
+
- Fields and Values
-
- Math
-
- Conversions
Μετατροπές
- Conditionals
-
second|seconds
list of words separated by | which reference years
-
minute|minutes
list of words separated by | which reference minutes
-
hour|hours
list of words separated by | which reference minutes hours
-
day|days
list of words separated by | which reference days
-
week|weeks
wordlist separated by | which reference weeks
-
month|months
list of words separated by | which reference months
-
year|years
list of words separated by | which reference years
-
- Date and Time
-
- String
-
- Color
- Χρώμα
+
- Geometry
Γεωμετρία
- Record
-
- No root node! Parsing failed?
-
- (no root)
-
- Unary minus only for numeric values.
-
- Can't preform /, *, or % on DateTime and Interval
-
- [unsupported type;%1; value:%2]
-
- Column '%1' not found
-
Exception: %1
-
GEOS prior to 3.2 doesn't support GEOSInterpolate
-
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- γραμμή %1 περιλαμβάνει %n διπλότυπο κόμβο στο %2
- γραμμή %1 περιλαμβάνει %n διπλότυπους κόμβους στο %2
-
+ γραμμή %1 περιλαμβάνει %n διπλότυπο κόμβο στο %2 γραμμή %1 περιλαμβάνει %n διπλότυπους κόμβους στο %2
infinite
-
Unable to instantiate the data provider plugin %1
-
no available replacement for internal fieldname ogc_fid found
-
Reserved attribute name ogc_fid replaced with %1
-
By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
-
Arc/Info ASCII Coverage
-
Atlas BNA
-
Comma Separated Value
-
ESRI Shapefile
-
FMEObjects Gateway
-
New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
Limit the number of coordinate pairs per line in multiline format.
-
Set the number of decimal for coordinates. Default value is 10.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
Set to YES to resize fields to their optimal size.
-
DBF File
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
If not specified, GML2 will be used.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
Geography Markup Language [GML]
-
Generic Mapping Tools [GMT]
-
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
S-57 Base file
-
Spatial Data Transfer Standard [SDTS]
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
Geoconcept
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
Cannot overwrite a OGR layer in place
-
Unable to load %1 provider
-
Provider %1 has no %2 method
-
Loaded from Provider
-
Loading of layer failed
-
Creation error for features from #%1 to #%2. Provider errors was:
%3
-
Import was canceled at %1 of %2
-
Vector import
-
Only %1 of %2 features written.
-
Reading raster part %1 of %2
-
Building pyramids failed - write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Multiband color
-
Paletted
-
Singleband gray
-
Singleband pseudocolor
-
Singleband color data
-
All Ramps
-
Inverted polygons
-
SVG marker
-
Ellipse marker
-
Vector Field marker
-
Gradient fill
-
Shapeburst fill
-
Centroid fill
-
Line pattern fill
-
Point pattern fill
-
<html>QGIS rocks!</html>
-
Internal Compass
-
Shows a QtSensors compass reading
-
Version 0.1
@@ -9824,6 +9790,7 @@ Only %1 of %2 features written.
Layers
Επίπεδα
@@ -9921,12 +9888,12 @@ Only %1 of %2 features written.
Could not reproject view extent: %1
-
Could not reproject layer extent: %1
-
Globe
-
Overlay data on a 3D globe
- Επίθεση δεδομένων σε 3D Globe
+
Creates a Heatmap raster for the input point vector
-
Road graph plugin
-
It solves the shortest path problem.
-
Is disjoint
-
Εργαλείο εισαγωγής από Shapefile σε PostgreSQL / PostGIS
+ SQL Anywhere plugin
- Πρόσθετο SQL Anywhere
+ Πρόσθετο SQL Anywhere
+
+
+ Store vector layers within a SQL Anywhere database
+
Zonal statistics plugin
-
A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
-
Cannot open GDAL MEM dataset %1: %2
-
Cannot GDALCreateGenImgProjTransformer:
-
Cannot inittialize GDALWarpOperation :
-
Cannot ChunkAndWarpImage: %1
-
This raster file has no bands and is invalid as a raster layer.
-
Cannot get GDAL raster band: %1
-
Nearest Neighbour
- Εγγύτερος γειίτονας
+
Average
-
Cubic
- Κυβικός
+
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS δεν μπορούσε να βρει GRASS εγκατάσταση σας.
Θα θέλατε να καθορίσετε διαδρομή (GISBASE) για την εγκατάσταση του GRASS;
@@ -10521,7 +10494,7 @@ Would you like to specify path (GISBASE) to your GRASS installation?
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
Cannot open GISRC file
-
Loading of the MSSQL provider failed
-
Unsupported type for field %1
-
Creation of fields failed
-
OGR[%1] error %2: %3
-
Unable to create the datasource. %1 exists and overwrite flag is false.
-
Unable to get driver %1
-
Arc/Info Binary Coverage
-
DODS
-
OpenFileGDB
-
ESRI Shapefiles
-
GeoPackage
-
Grass Vector
-
Informix DataBlade
-
OGDI Vectors
-
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
UK. NTF2
-
U.S. Census TIGER/Line
-
VRT - Virtual Datasource
-
X-Plane/Flightgear
-
Duplicate field (10 significant characters): %1
-
Creating the data source %1 failed: %2
-
Unknown vector type of %1
-
Creation of OGR data source %1 failed: %2
-
field %1 with unsupported type %2 skipped
-
Couldn't create file %1.qpj
-
- Fetching features failed.
SQL:%1
Error: %2
Η ανάκτηση των αντικειμένων απέτυχε. SQL:%1 Σφάλμα: %2
- Oracle
Oracle
@@ -10880,53 +10853,53 @@ Error: %2
Creation of data source %1 failed:
%2
-
Loading of the layer %1 failed
-
Field name clash found (%1 not remappable)
-
%1 not owner of the table %2.
-
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Unable to delete layer %1.%2:
%3
-
Unable to clean metadata %1.%2:
%3
-
no result buffer
-
Fetching from cursor %1 failed
Database error: %2
-
Infinite filter rectangle specified
-
Unable to delete layer %1:
%2
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
SQLite error: %2
SQL: %1
-
SQLite error getting feature: %1
-
creation of data source %1 failed. %2
-
loading of the layer %1 failed
-
creation of fields failed
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints [%1]
-
Unable to delete table %1
-
Unable to delete table %1:
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
The extra plugin path '%1' does not exist !
-
Couldn't set SIP API versions.
-
Undefined
- Απροσδιόριστος
+
Group
-
Subgroup
-
Symbol label
-
A Plugin for finding topological errors in vector layers
-
Using fix %1.
-
features too close
-
point not covered by segment
-
segment too short
-
invalid geometry
-
dangling end
-
duplicate geometry
-
line ends not covered by point
-
multipart feature
σύνθετο αντικείμενο
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Save style to DB (%1)
-
Could not save symbology because:
%1
-
Attribute index %1 out of bounds [0;%2]
-
Feature ID
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
-
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- Υπόμνημα
+
QSpatiaLiteDriver
- Error opening database
-
- Error closing database
Σφάλμα κατά το κλείσιμο της βάσης δεδομενων
- Unable to begin transaction
Αδυναμία εκκίνησης δοσοληψίας
- Unable to commit transaction
Αδυναμία οριστικοποίησης της δοσοληψίας
- Unable to rollback transaction
Αδυναμία αναίρεσης της δοσοληψίας
@@ -11496,27 +11474,27 @@ Response was:
Δεν υπάρχει ερώτημα
- Unable to execute statement
Αδυναμία εκτέλεσης ερωτήματος
- Unable to execute multiple statements at a time
Αδυναμία ταυτόχρονης εκτέλεσης πολλαπλών ερωτημάτων
- Unable to reset statement
Αδυναμία επαναφοράς ερωτήματος
- Unable to bind parameters
Αδυναμία δέσμευσης παραμέτρων
- Parameter count mismatch
Αναντιστοιχία απαρίθμησης παραμέτρων
@@ -11639,12 +11617,12 @@ Response was:
Browser
-
Browser (2)
-
Log Messages
-
QGIS Έτοιμο!
- Minimize
Ελαχιστοποίηση
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Ελαχιστοποιεί το ενεργό παράθυρο στην αποβάθρα
- Zoom
Μεγέθυνση
- Toggles between a predefined size and the window size set by the user
Εναλλαγή ανάμεσα σε ένα προκαθορισμένο μέγεθος και το μέγεθος του παραθύρου που ορίστηκε από το χρήστη
- Bring All to Front
Φέρτε τα όλα στο προσκήνιο
- Bring forward all open windows
Φέρτε όλα τα ανοιχτά παράθυρα στο προσκήνιο
- Current Edits
- Τρέχουσες αλλαγές
+
- Error
Σφάλμα
- Failed to open Python console:
Αποτυχία έναρξης κονσόλας Python:
@@ -11761,148 +11739,148 @@ Response was:
Multiple instances of QGIS application object detected.
Please contact the developers.
-
QGIS - %1 ('%2')
-
- Panels
Πίνακες
- Toolbars
Toolbars
- Window
Παράθυρο
- &Database
&Βάση Δεδομένων
- &Web
@Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
Μπάρα προόδου που εμφανίζει την κατάσταση σχεδιασμού των διαφόρων επιπέδων καθώς και άλλες χρονοβόρες διεργασίες.
- Toggle extents and mouse position display
Πινακίδα ένδειξης του ορατού πεδίου και της θέσης του ποντικιού
- Coordinate:
Συντεταγμένη:
- Current map coordinate
Τρέχουσα συντεταγμένη χάρτη
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
-
- Current map coordinate (lat,lon or east,north)
-
- Scale
Κλίμακα
- Current map scale
Τρέχουσα κλίμακα χάρτη
- Displays the current map scale
Εμφάνιση τρέχουσας κλίμακας χάρτη
- Current map scale (formatted as x:y)
Η τρέχουσα κλίμακα χάρτη (μορφοποιημένη ως x: y)
- Render
Διαδικασία σχεδίασης χάρτη
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Εάν επιλεχθεί, τα επίπεδα του χάρτη σχεδιάζονται (αναπαράγονται) αποκρινόμενα σε κάθε εντολή πλοήγησης ή άλλα γεγονότα. Εάν δεν επιλεχθεί, δεν εκτελείται κανένας σχεδιασμός. Αυτό σας επιτρέπει να προσθέσετε ένα μεγάλο αριθμό επιπέδων και να ορίσετε συμβολίσμό πριν την αναπαραγωγή τους.
- Toggle map rendering
Εναλλαγή απεικόνισης / απόδοσης χάρτη
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Αυτό το εικονίδιο δείχνει αν είναι ενεργοποιημένος ή όχι ο αυτόματος μετασχηματισμός συστήματος συντεταγμένων. Κάντε κλικ στο εικονίδιο για να εμφανιστεί το παράθυρο διαλόγου ιδιοτήτων του έργου για να αλλάξει αυτή τη συμπεριφορά.
- CRS status - Click to open coordinate reference system dialog
Κατάσταση Γεωγραφικού Συστηματος Αναφοράς Συντεταγμένων- Κάντε κλικ για να ανοίξετε το Παράθυρο "Γεωγραφικό Σύστημα Αναφοράς"
- Ready
Έτοιμο
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Επισκόπηση καμβά χάρτη. Αυτός ο καμβάς μπορεί να χρησιμοποιηθεί για την απεικόνιση ενός χάρτη εντοπισμού που δείχνει την τρέχουσα έκταση του καμβά χάρτη. Η τρέχουσα έκταση εμφανίζεται ως ένα κόκκινο ορθογώνιο. Κάθε επίπεδο (επίπεδο) πάνω στο χάρτη μπορεί να προστεθεί στην επισκόπηση καμβά.
- Overview
Επισκόπηση
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Λεζάντα χάρτη που εμφανίζει όλα τα τρέχοντα επίπεδα στον καμβά χάρτη. Κάντε κλικ στο πλαίσιο ελέγχου για να εμφανίσετε ή να αποκρύψετε ένα επίπεδο. Κάντε διπλό κλικ σε ένα επίπεδο στη λεζάντα για να προσαρμόσετε την εμφάνισή του και να καθορίσετε άλλες ιδιότητες.
- Layers
Επίπεδα
- Map layer list that displays all layers in drawing order.
-
- Layer order
-
Ιδιωτικό qgis.db
- < Blank >
-
- QGIS version
Έκδοση QGIS
- QGIS code revision
-
-
- Compiled against Qt
-
-
- Running against Qt
-
-
- Compiled against GDAL/OGR
-
Compiled against Qt
+
+
+ Running against Qt
+
+
+ Compiled against GDAL/OGR
+
+
+ Running against GDAL/OGR
-
- PostgreSQL Client Version
-
- No support.
Χωρίς υποστήριξη.
- SpatiaLite Version
Έκδοση SpatiaLite
- QWT Version
Έκδοση QWT
- PROJ.4 Version
Έκδοση PROJ.4
- QScintilla2 Version
Έκδοση QScintilla2
- This copy of QGIS writes debugging output.
-
- %1 doesn't have any layers
%1 δεν έχει κανένα επίπεδο
- Invalid Data Source
Μη έγκυρη Πηγή δεδομένων
- %1 is not a valid or recognized data source
%1 δεν είναι έγκυρη ή αναγνωρισμένη πηγή δεδομένων raster
- Vector
Διανυσματικό
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
-
- %1 is an invalid layer - not loaded
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
- QGIS files
-
- No legend entries selected
-
- Select the layers and groups you want to remove in the legend.
-
- Remove layers and groups
-
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
- Do you want to save the current project? %1
-
- Invalid Layer
Μη έγκυρο επίπεδο
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
-
- Delimited Text
Οριοθετημένο Κείμενο
- Cannot get Delimited Text select dialog from provider.
-
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
-
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
-
- WMS
WMS
- Cannot get WMS select dialog from provider.
-
- WCS
WCS
- Cannot get WCS select dialog from provider.
-
- WFS
WFS
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
-
- Auto-open Project
-
- Failed to open: %1
-
- Not valid project file: %1
-
- Project failed to open: %1
-
- Default template has been reopened: %1
-
- File not found: %1
-
- Calculating...
Υπολογισμός...
- Abort...
Αναίρεση...
- Choose a QGIS project file to open
Επιλέξτε ένα αρχείο έργου (project file) QGIS για άνοιγμα
- Loading project: %1
-
- Unable to open project
Αδύνατο το άνοιγμα του Project
- Security warning
-
- project macros have been disabled.
-
- Enable macros
-
- Project loaded
-
- Choose a QGIS project file
Επιλέξατε ένα αρχείο QGIS Project
- Saved project to: %1
Αποθηκευμένα project: %1
- Unable to save project %1
Αδυναμία αποθήκευσης του έργου %1
- Choose a file name to save the QGIS project file as
Επιλέξτε ένα όνομα αρχείου με το οποίο θα αποθηκεύσετε το αρχείο του project QGIS
- Unable to load %1
Αδυναμία φόρτωσης του %1
- Choose a file name to save the map image as
Επιλέξτε ένα όνομα αρχείου για να αποθηκεύσετε την εικόνα χάρτη
- Saved map image to %1
Αποθηκεύτηκε εικόνα χάρτη στο %1
- Default system font substituted.
-
- Labeling
- Εισαγωγή ταμπελών
+
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
Άνοιγμα παραθύρου διαλόγου ετικετών
@@ -12305,901 +12277,889 @@ Please contact the developers.
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
- Ταξινόμηση
+
Range
- Εύρος
+
Unique Values
-
File Name
-
Value Map
-
Enumeration
- Απαρίθμηση
+
Hidden
- Κρυφό
+
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
-
Web View
-
Color
- Χρώμα
+
Relation Reference
-
Date/Time
-
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
Μη επαρκή δικαιώματα
- The project file is not writable.
-
- DXF export completed
-
- DXF export failed
-
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
Σφάλματα:%1
- Show more
Εμφάνιση περισσοτέρων
- Labeling Options
-
- Please select a vector layer first
-
- Layer labeling settings
-
- Reading raster
-
- Cannot write raster error code: %1
-
- Saving done
Η αποθήκευση ολοκληρώθηκε
- Export to vector file has been completed
Η εξαγωγή σε διανυσματικο αρχείο ολοκληρώθηκε
- Save error
Σφάλμα αποθήκευσης
- Export to vector file failed.
Error: %1
Η εξαγωγή σε διανυσματικο αρχείο απέτυχε.
Σφάλμα: %1
- No Layer Selected
Κανένα επίπεδο δεν έχει επιλεγεί
- To delete features, you must select a vector layer in the legend
Για να διαγράψετε χαρακτηριστικά, πρέπει να επιλέξετε ένα διανυσματικό επίπεδο στη λεζάντα
- No Vector Layer Selected
Κανένα διανυσματικό επίπεδο δεν έχει επιλεγεί
- Deleting features only works on vector layers
Διαγραφή χαρακτηριστικών λειτουργεί μόνο σε διανυσματικά επίπεδα
- Provider does not support deletion
Πάροχος δεν υποστηρίζει τη διαγραφή
- Data provider does not support deleting features
Δεδομένα πάροχος δεν υποστηρίζει τη διαγραφή στοιχείων
- Layer not editable
Επίπεδο μη εγγράψιμο
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Το τρεχων επίπεδο είναιμη εγγράψιμο. Επιλέξατε 'Έναρξη επεξεργασίας' στην εργαλειοθήκη ψηφιοποίησης.
- No Features Selected
Δεν έχουν επιλεγεί αντικείμενα
- The current layer has not selected features
-
- Delete features
Διαγραφή χαρακτηριστικών
- Delete %n feature(s)?
number of features to delete
-
- Διαγραφη %n χαρακτηριστικού;
- Διαγραφη %n χαρακτηριστικών;
-
+ Διαγραφη %n χαρακτηριστικού; Διαγραφη %n χαρακτηριστικών;
- Features deleted
Χαρακτηριστικά διαγράφτηκαν
- Problem deleting features
Πρόβλημα στη διαγραφή χαρακτηριστικών
- A problem occured during deletion of features
Ένα πρόβλημα συνέβη κατά τη διαγραφή των στοιχείων
- %n feature(s) deleted.
number of features deleted
-
-
+
- Merging features...
Συγχώνευση χαρακτηριστικών...
- Abort
Ματαίωση
- Create unique print composer title
-
- (title generated if left empty)
-
- Composer title
-
- Title can not be empty!
-
- Title already exists!
-
- Composer %1
Συνθέτης%1
- copy
αντιγραφή
- No active layer
Κανένα επίπεδο δεν είναι ενεργό
- No active layer found. Please select a layer in the layer list
Δεν βρέθηκε ενεργό επίπεδο. Παρακαλώ επιλέξτε ένα επίπεδοστη λίστα επιπέδων
- Active layer is not vector
Ενεργό επίπεδο μη διανυσματικό
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Το εργαλείο συγχώνευσης λειτουργεί μόνο σε διανυσματικά επίπεδα. Επιλέξατε ένα διανυσματικό επίπεδο από τη λίστα επιπέδων
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Συγχώνευση χαρακτηριστικών μπορεί να γίνει μόνο για επίπεδα σε κατάσταση επεξεργασίας. Για να χρησιμοποιήσετε το εργαλείο συγχώνευσης, πηγαίνετε στο Επίπεδο -> Εναλλαγή δυνατότητας Επεξεργασίας
- Not enough features selected
Δεν επιλέχθηκαν αρκετά χαρακτηριστικά
- The merge tool requires at least two selected features
Το εργαλείο συγχώνευσης απαιτεί τουλάχιστον δύο επιλεγμένα χαρακτηριστικά
- Merged feature attributes
-
- Merge failed
Συγχώνευση απέτυχε
- An error occured during the merge operation
Παρουσιάστηκε σφάλμα κατά τη λειτουργία συγχώνευσης
- Union operation canceled
Η λειτουργία της συνένωσης ακυρώθηκε
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
Η λειτουργία της Ένωσης θα οδηγήσει σε ένα είδος γεωμετρίας που δεν είναι συμβατή με το τρέχον επίπεδο και ως εκ τούτου ακυρώνεται
- Merged features
Συγχωνευθέντα χαρακτηριστικά
- No active vector layer
Κανένα ενεργό διανυσματικό επίπεδο
- To select features, choose a vector layer in the legend
Για να επιλέξετε αντικείμενα, επιλέξτε ένα διανυσματικό επίπεδο στο υπόμνημα
- Features cut
Κομμένα Χαρακτηριστικά
- Features pasted
Επικολλημένα Χαρακτηριστικά
- Paste features
Επικόλληση αντικειμένων
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
-
- New memory layer name
-
- Layer name
Όνομα επιπέδου
- No features in clipboard.
-
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
-
- Cannot create field %1 (%2,%3)
Αδυναμία δημιουργίας πεδίου %1 (%2, %3)
- Cannot copy style: %1
-
- Cannot parse style: %1:%2:%3
-
- Cannot read style: %1
-
- Start editing failed
Έναρξη επεξεργασίας απέτυχε
- Provider cannot be opened for editing
Πάροχος υπηρεσιών δεν μπορεί να ανοιχθεί για επεξεργασία
- Stop editing
Τερματισμός επεξεργασίας
- Do you want to save the changes to layer %1?
Θέλετε να αποθηκεύσετε τις αλλαγές στο %1 επίπεδο;
- Problems during roll back
Προβλήματα κατά τη διάρκεια επαναφοράς
- Could not %1 changes to layer %2
Errors: %3
-
- rollback
-
- cancel
-
- Save
Αποθήκευση
- all
-
- Rollback
-
- Cancel
Ακύρωση
- Current edits
-
- %1 current changes for %2 layer(s)?
-
- copy
αντιγραφή
- Plugin layer
-
- Memory layer
-
- Duplicate layer:
-
- %1 (duplication resulted in invalid layer)
-
- Set scale visibility for selected layers
-
-
- Couldn't load Python support library: %1
-
Couldn't resolve python support library's instance() symbol.
- Couldn't load Python support library: %1
+
- Couldn't resolve python support library's instance() symbol.
+
+
+ Python support ENABLED :-)
Η υποστήριξη Python ΕΝΕΡΓΟΠΟΙΗΘΗΚΕ :-)
- There is a new version of QGIS available
Υπάρχει διαθέσιμη μια νέα έκδοση του QGIS
- You are running a development version of QGIS
Εκτελείτε μια έκδοση ανάπτυξης QGIS
- You are running the current version of QGIS
Εκτελείτε την τρέχουσα έκδοση του QGIS
- Would you like more information?
Θα θέλατε περισσότερες πληροφορίες;
- QGIS Version Information
QGIS Πληροφορίες έκδοσης
- QGIS - Changes since last release
QGIS - Αλλαγές από την προηγούμενη
- Unable to get current version information from server
Αδυναμία λήψης πληροφοριών για την τρέχουσα έκδοση από το διακομιστή
- Connection refused - server may be down
Σύνδεση απέτυχε - ο διακομιστής μπορεί να είναι κάτω
- QGIS server was not found
QGIS διακομιστής δεν βρέθηκε
- Unknown network socket error: %1
-
- Unable to communicate with QGIS Version server
%1
Αδύνατη η επικοινωνία με διακομιστη εκδόσεων QGIS
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
-
- To change brightness or contrast, you need to have a raster layer selected.
-
- en
documentation language
-
- Layer is not valid
Μη έγκυρο επίπεδο
- The layer %1 is not a valid layer and can not be added to the map
Το επίπεδο %1 δεν είναι ένα έγκυρο επίπεδο και δεν μπορεί να προστεθεί στο χάρτη
- The layer is not a valid layer and can not be added to the map
Το επίπεδο δεν είναι έγκυρο και δεν μπορεί να προστεθεί στον χάρτη
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
- Save?
Αποθήκευση;
- Current CRS: %1 (OTFR enabled)
-
- Current CRS: %1 (OTFR disabled)
-
- Map coordinates for the current view extents
Συντεταγμένες του χάρτη για την τρέχουσα εμφανιζόμενη έκταση
- Map coordinates at mouse cursor position
Συντεταγμένες του χάρτη στη θέση του δρομέα του ποντικιού
- Extents:
Έκταση:
- Maptips require an active layer
Maptips απαιτεί ένα ενεργό επίπεδο
- %n feature(s) selected on layer %1.
number of selected features
-
- %n χαρακτηριστικό προστέθηκε στο επίπεδο %1.
- %n χαρακτηριστικά προστέθηκαν στο επίπεδο %1.
-
+ %n χαρακτηριστικό προστέθηκε στο επίπεδο %1. %n χαρακτηριστικά προστέθηκαν στο επίπεδο %1.
- Open a GDAL Supported Raster Data Source
Ανοίξτε μια Πηγή Δεδομένων GDAL που Υποστηρίζει Raster Δεδομένα
- Error adding valid layer to map canvas
-
- Raster layer
Εικονιστικό επίπεδο
- %1 is not a supported raster data source
Το %1 δεν είναι μια υποστηριζόμενη πηγή raster δεδομένων
- Unsupported Data Source
Μη υποστηριζόμενη πηγή δεδομένων
- Exit QGIS
Έξοδος από το QGIS
- Do you really want to quit QGIS?
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Το αρχείο του Project σώθηκε από μια παλαιότερη έκδοση του QGIS. Κατά την αποθήκευση αυτού του αρχείου Project, το QGIS θα το ενημερώσει στην πιο πρόσφατη έκδοση, πιθανώς καθιστώντας το άχρηστο για τις παλαιότερες εκδόσεις του QGIS. <p> Μολονότι οι QGIS προγραμματιστές προσπαθούν να διατηρήσουν την προς τα πίσω συμβατότητα, ορισμένες από τις πληροφορίες από το παλιό αρχείο του Project μπορεί να χαθούν . Για να βελτιωθεί η ποιότητα των QGIS, θα εκτιμούσαμε αν αναφέρατε το σφάλμα στο %3. Βεβαιωθείτε ότι έχετε συμπεριλάβει το παλιό αρχείο του Project, και την έκδοση του QGIS που χρησιμοποιήσατε για να ανακαλύψετε το σφάλμα. <p> Για να καταργήσετε αυτήν την προειδοποίηση όταν ανοίγει ένα παλαιότερο αρχείο Project, απο-επιλέξατε στη θέση '%5' στο μενού %4. <p> Έκδοση του αρχείου Project: %1 <br> Τρέχουσα έκδοση του QGIS: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Ρυθμίσεις: Επιλογές: Γενικά</tt>
- Warn me when opening a project file saved with an older version of QGIS
Ειδοποίηση σχετικά με το άνοιγμα ενός αρχείου Project αποθηκευμένου με μια παλαιότερη έκδοση του QGIS
- Project file is older
Το αρχείο του Project ειναι παλαιότερο
- This project file was saved by an older version of QGIS
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
-
- Warning
Προειδοποίηση
- This layer doesn't have a properties dialog.
Αυτό το επίπεδο δεν διαθέτει παράθυρο διαλόγου.
- Authentication required
Απαιτείται ταυτοποίηση
- Proxy authentication required
Απαιτείται ταυτοποίηση ενδιάμεσου (Proxy)
- SSL errors occured accessing URL %1:
Σφάλματα SSL ανέκυψαν κατά την πρόσβαση στο URL %1:
-
Always ignore these errors?
-
- %n SSL errors occured
number of errors
-
-
+
@@ -13231,9 +13191,9 @@ Always ignore these errors?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
-
<p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
-
Qt Image Plugin Search Paths <br>
-
@@ -13489,58 +13449,58 @@ p, li { white-space: pre-wrap; }
&Expand All
-
&Collapse All
-
&Remove
- Απομάκ&ρυνση
+
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Duplicate
-
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As Layer Definition File...
-
QgsApplication
- Exception
Εξαίρεση
- unknown exception
άγνωστο σφάλμα
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13602,65 +13562,65 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
Δεν ήταν δυνατό το άνοιγμα του qgis.db
- Migration of private qgis.db failed.
%1
-
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
- Συνθέτης
+
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
@@ -13669,35 +13629,35 @@ User DB Path: %9
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Expression based filename
-
Atlas preview
-
No matching atlas features found!
-
Expression based filter
-
@@ -13710,7 +13670,7 @@ Parser error:
Generate an atlas
-
Coverage layer
-
Hidden coverage layer
-
Sort direction
-
Output filename expression
-
@@ -13791,7 +13751,7 @@ Parser error:
Echo attribute's value
-
Selected field's value (Identify features tool)
-
Clicked coordinates (Run feature actions tool)
-
Search on web based on attribute's value
-
@@ -13839,7 +13799,7 @@ Parser error:
This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Inserts an expression into the action
-
Inserts the selected field into the action
-
Update selected action
-
@@ -14031,7 +13991,7 @@ Parser error:
Feature Attributes
-
@@ -14079,7 +14039,7 @@ Parser error:
Insert NULL value on top
-
@@ -14105,12 +14065,12 @@ Parser error:
Columns
- Στήλες
+
Reset
- Επαναφορά
+
Case sensitive
-
Delete selected features (DEL)
-
Unselect all (Ctrl+U)
-
Toggle editing mode (Ctrl+E)
-
Select features using an expression
-
Filters the visible features according to the current filter selection and filter string.
-
mMainViewButtonGroup
-
Table View
-
=
- =
+
Update All
-
Advanced Filter (Expression)
-
Use the Expression Builder to define the filter
-
Show All Features
-
Show Selected Features
-
Show Edited and New Features
-
Show Features Visible On Map
-
The filter defines which features are currently shown in the list or on the table
-
Form View
-
Column Filter
-
Filter all the features which have been edited but not yet saved
-
Open field calculator (Ctrl+I)
-
Attribute table - %1 (%n Feature(s))
feature count
-
- Πίνακας Ιδιοτήτων - %1 (%n Χαρακτηριστικό)
- Πίνακας Ιδιοτήτων - %1 (%n Χαρακτηριστικά)
-
+ Πίνακας Ιδιοτήτων - %1 (%n Χαρακτηριστικό) Πίνακας Ιδιοτήτων - %1 (%n Χαρακτηριστικά)
Parsing error
-
Evaluation error
-
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
-
Update Filtered
-
Error
- Σφάλμα
+
An error occured while evaluating the calculation string:
%1
-
Expression based filter
-
Attribute error
-
Error filtering
-
Geometryless feature added
-
@@ -14470,7 +14427,7 @@ Parser error:
Edit Widget Properties
-
Label on top
-
@@ -14488,67 +14445,67 @@ Parser error:
Normal
-
Lighten
-
Screen
-
Dodge
-
Addition
- Προσθήκη
+
Darken
-
Multiply
-
Burn
-
Overlay
-
Soft light
-
Hard light
-
Difference
- Διαφορά
+
Subtract
-
@@ -14580,7 +14537,7 @@ Parser error:
Database: %1
Driver: %2
Database: %3
-
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Είστε σίγουροι ότι επιθυμείτε τη διαγραφή του(ων) σελιδοδείκτη(ων);
-
+ Είστε σίγουροι ότι επιθυμείτε τη διαγραφή του(ων) σελιδοδείκτη(ων);
Empty extent
- 'Αδεια έκταση
+
Reprojected extent is empty.
-
@@ -14677,7 +14631,7 @@ Database:%2
Cannot get WMS select dialog from provider.
-
Cannot set layer CRS
-
@@ -14695,12 +14649,12 @@ Database:%2
QGIS Browser
-
Param
-
Preview
- Προεπισκόπηση
+
Stop rendering
-
Attributes
- Χαρακτηριστικά
+
toolBar
- εργαλειοθήκη
+
New Shapefile
-
Dialog
- Διάλογος
+
Case Sensitive
- Διάκριση πεζών/κεφαλαίων
+
Filter Pattern Syntax
-
Normal
-
Wildcard(s)
-
Regular Expression
-
Fast scan this dir.
-
Add a directory
-
Add directory to favourites
-
Directory Properties
-
@@ -14871,7 +14825,7 @@ Database:%2
Browser
-
Add Selected Layers
- Προσθήκη Επιλεγμένων Επιπέδων
+
Filter Files
-
Collapse All
- Σύμπτυξη όλων
+
Filter files
-
@@ -14921,17 +14875,17 @@ Database:%2
Dialog
- Διάλογος
+
Display Name
-
Layer Source
-
Project home
-
Home
-
No Brush
-
BDiagonal
-
FDiagonal
-
Diagonal X
-
Dense 1
-
Dense 2
-
Dense 3
-
Dense 4
-
Dense 5
-
Dense 6
-
Dense 7
-
@@ -15068,23 +15022,23 @@ Database:%2
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
Σύμβολο
- Value
Τιμή
- Label
Ετικέτα
@@ -15114,7 +15068,7 @@ Database:%2
Invert
-
Προηγμένες επιλογές
- Random colors
-
- Symbol levels...
-
- High number of classes!
-
- Classification would yield %1 entries which might not be expected. Continue?
-
- Error
Σφάλμα
- There are no available color ramps. You can add them in Style Manager.
Δεν υπάρχουν διαθέσιμες σετ χρώματος. Μπορείτε να τις προσθέσετε στον Διαχείριση στυλ.
- The selected color ramp is not available.
Το επιλεγμένο σετ χρώματος δεν είναι διαθέσιμο.
- Confirm Delete
- Επιβεβαίωση Διαγραφής
+
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
-
@@ -15217,17 +15171,17 @@ Should the existing classes be deleted before classification?
Form
-
Representation for checked state
-
Representation for unchecked state
-
@@ -15235,35 +15189,30 @@ Should the existing classes be deleted before classification?
Shift-click to expand, then collapse others
-
Ctrl (or Alt)-click to toggle all
-
QgsColorButton
- Select Color
Επιλογή χρώματος
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -15280,12 +15229,12 @@ Should the existing classes be deleted before classification?
Random colors
-
New color ramp...
-
@@ -15314,7 +15263,7 @@ Should the existing classes be deleted before classification?
Internal Compass
-
Composer
Συνθέτης
Print Composers
- Συντάκτης Εκτύπωσης
+
Normal
-
Simulate Photocopy (Grayscale)
-
Simulate photocopy (grayscale)
-
Simulate Fax (Mono)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
Panels
- Πίνακες
+
Atlas generation
-
Set as atlas feature for %1
-
x: %1 mm
-
y: %1 mm
-
page: %3
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
Choose a file name to save the map as
Επιλέξτε ένα όνομα αρχείου για να αποθηκεύσετε το χάρτη ως
@@ -15544,17 +15493,17 @@ Should the existing classes be deleted before classification?
Empty filename pattern
-
The filename pattern is empty. A default one will be used.
-
Unable to write into the directory
Αδυναμία εγγραφής στο φάκελο
The given output directory is not writable. Cancelling.
-
Atlas processing error
-
Feature filter parser error: %1
-
Error creating %1.
-
Rendering maps...
-
Abort
Ματαίωση
- Big image
Μεγάλη εικόνα
- To create image %1x%2 requires about %3 MB of memory. Proceed?
-
- Choose a file name to save the map image as
Επιλέξτε ένα όνομα αρχείου για να αποθηκεύσετε την εικόνα χάρτη ως
- Memory Allocation Error
Αδυναμία δέσμευσης μνήμης
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
-
- Image export error
Σφάλμα εξαφωγής εικόνας
- Directory where to save image files
-
- Image format:
-
- SVG warning
SVG προειδοποίηση
- Don't show this message again
Να μην εμφανιστεί ξανά αυτό το μήνυμα
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
-
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4 κωδικό svg. Ειδικότερα, υπάρχουν προβλήματα με τα επίπεδα που δεν ψαλιδίζονται στο περιβάλλοντα πλαίσιο του χάρτη . </P> για σφάλματα και ελλείψεις στην
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Εάν χρειάζεστε ένα διανυσματικό αρχείο εξόδου από το Qgis αυτό που σας προτείνουμε είναι να δοκιμάσετε την εκτύπωση σε PostScript αν το αποτέλεσμα σε SVG δεν είναι ικανοποιητικό. </P>
- SVG Format
SVG Format
- Directory where to save SVG files
-
- SVG export error
Σφάλμα εξαγωγής SVG
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
αντιγραφή
- Duplicating composer...
-
- Duplicate Composer
-
- Composer duplication failed.
-
- Save template
Αποθήκευση προτύπου
- Composer templates
-
- Save error
Σφάλμα αποθήκευσης
- Error, could not save file
Σφάλμα, δεν μπόρεσε να σώσει το αρχείο
- Load template
Φόρτωση προτύπου
- Read error
Σφάλμα Ανάγνωσης
- Error, could not read file
Σφάλμα, δεν μπόρεσε να διαβάσει το αρχείο
- Composer error
-
- Error, could not create new composer
-
- Loading template into composer...
-
- Project contains WMS layers
Έργο περιλαμβάνει WMS επίπεδα
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Ορισμένοι διακομιστές WMS (π.χ. UMN mapserver) έχουν ένα όριο για το ΠΛΑΤΟΣ και την παράμετρο ΥΨΟΣ. Εκτύπωση επιπέδων από αυτούς τους διακομιστές μπορεί να υπερβεί αυτό το όριο. Εάν αυτό συμβεί, το επίπεδο του WMS δεν θα εκτυπωθεί
-
- Project contains composition effects
-
-
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
-
Project contains composition effects
+
+
+ Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
+
+
+ Print as raster
Εκτύπωση ως εικόνα
- Landscape
- Τοπίο
+
@@ -15834,41 +15783,41 @@ Please try a lower resolution or a smaller papersize
Arrow outline width
-
Arrowhead width
-
Arrow color changed
-
Select arrow color
-
Arrow marker changed
-
Arrow start marker
-
Arrow end marker
-
Main properties
- Κύριες ιδιότητες
+
Line width
- Πάχος γραμμής
+
Arrow head width
-
Default
- Προεπιλογή
+
None
- Κανένα
+
Center
- Κέντρο
+
Right
- Δεξιά
+
Left
- Αριστερά
+
Attribute
- Ιδιότητα
+
Heading
-
Alignment
- Στοίχιση
+
@@ -15999,27 +15948,27 @@ Please try a lower resolution or a smaller papersize
Composer
- Συνθέτης
+
Paper Navigation
-
Composer Item Actions
-
Composer Items
-
Atlas
- Άτλας
+
Zoom full
-
Zoom out
- Σμίκρυνση
+
Add Legend
-
Add new legend
-
Show Grid
-
Show grid
- Εμφάνιση πλέγματος
+
Snap to Grid
-
Snap to grid
-
Ctrl+Shift+'
-
Show Guides
-
Show guides
-
Ctrl+;
-
Snap to Guides
-
Snap to guides
-
Smart Guides
-
Smart guides
-
Clear Guides
-
Clear guides
-
Ctrl+G
- Ctrl+G
+
Ctrl+Shift+G
-
Ctrl+]
-
Align Top
-
Align Bottom
-
Add Table
-
Add attribute table
-
Page Setup
-
Page setup
-
&Redo
- Επανάληψη (&Redo)
+
Ctrl+Shift+L
- Ctrl+Shift+L
+
Pa&ste in Place
-
Paste in place
-
Del
-
De&select All
-
Deselect all
-
Select &All
-
Select all items
-
&Invert Selection
-
Invert selection
-
Select Next Item &Below
-
Select next item below
-
Ctrl+Alt+[
-
Select Next Item &Above
-
Select next item above
-
Ctrl+Alt+]
-
Pan Composer
-
Composer Options...
-
Show Rulers
-
Show rulers
-
First Feature
-
Previous Feature
-
Next Feature
-
Last Feature
-
Preview Atlas
-
Print Atlas...
-
Export Atlas as Images...
-
Export Atlas as SVG...
-
Export Atlas as PDF...
-
Export Atlas as PDF
-
Atlas Settings
-
Revert last change
-
Restore last change
-
Add Rectangle
-
Add rectangle
-
Add triangle
-
Add html frame
-
&New Composer
-
New composer
-
&Duplicate Composer
-
Duplicate composer
-
New from Template
-
New from template
-
Lock Selected Items
-
Unlock All
-
Unlock All Items
-
@@ -16839,17 +16788,17 @@ Please try a lower resolution or a smaller papersize
Left
- Αριστερά
+
Center
- Κέντρο
+
Right
- Δεξιά
+
@@ -16870,42 +16819,42 @@ Please try a lower resolution or a smaller papersize
Use existing frames
-
Extend to next page
-
Repeat on every page
-
Repeat until finished
-
Change html url
-
Select HTML document
-
Change resize mode
-
Use smart breaks changed
-
@@ -16943,12 +16892,12 @@ Please try a lower resolution or a smaller papersize
Add Frame
-
Use smart page breaks
-
mm
-
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
Το χρώμα πλαισίου άλλαξε
- Background color changed
Το χρώμα φόντου άλλαξε
- Item position changed
Η θέση του στοιχείου άλλαξε
- Item outline width
Πάχος περιγράμματος στοιχείου
- Item frame join style
-
- Item frame toggled
-
- Item background toggled
-
- Select background color
Επιλογή χρώματος φόντου
- Select frame color
Επιλογή χρώματος πλαισίου
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
Το αναγνωριστικό του στοιχείου άλλαξε
- Item rotation changed
-
@@ -17039,118 +16988,107 @@ Please try a lower resolution or a smaller papersize
Global Options
-
- Position and size
Θέση και μέγεθος
- Reference point
Σημείο αναφοράς
- X
Χ
- Y
Υ
- Width
Πλάτος
- Height
Ύψος
- Page
-
- ...
- ...
-
-
- Rotation
- Περιστροφή
+
- °
-
- Frame
Πλαίσιο
- mm
χιλιοστά
- Join style
- Τύπος σύνδεσης
+
- Rendering
-
- Blending mode
-
- Thickness
Πάχος
- Color...
Χρώμα...
- Background
Φόντο
- Transparency
Διαφάνεια
- Item ID
Αναγνωριστικό (ID) στοιχείου
- Id
Id
@@ -17160,43 +17098,43 @@ Please try a lower resolution or a smaller papersize
Label text HTML state changed
-
Label text changed
-
Label font changed
-
Label margin changed
-
Label color changed
-
- Insert expression
- Εισαγωγή έκφρασης
+
- Label alignment changed
-
@@ -17214,17 +17152,17 @@ Please try a lower resolution or a smaller papersize
Main properties
- Κύριες ιδιότητες
+
Render as HTML
-
Insert an expression
-
Vertical
-
Middle
-
Display
- Εμφάνιση
+
Margin
- Περιθώριο
+
QgsComposerLegend
+ Legend
- Υπόμνημα
+ Υπόμνημα
@@ -17335,145 +17274,145 @@ Please try a lower resolution or a smaller papersize
Title style
-
Item wrapping changed
-
Legend title changed
-
Legend title alignment changed
-
Legend column count
-
Legend split layers
-
Legend equal column width
-
Legend symbol width
-
Legend symbol height
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
Legend group space
-
Legend layer space
-
Legend symbol space
-
Legend icon label space
-
Title font changed
-
Legend group font changed
-
Legend layer font changed
-
Legend item font changed
-
Legend font color changed
-
Legend box space
-
Legend map changed
-
Legend item edited
-
Legend updated
-
Legend group added
-
-
- Map %1
- Χάρτης %1
+
Map %1
+
+
+ None
- Κανένα
+
@@ -17481,7 +17420,7 @@ Please try a lower resolution or a smaller papersize
Legend Options
-
Main properties
- Κύριες ιδιότητες
+
Wrap text on
-
Add group
-
Show feature count for each class of vector layer.
-
Space above text using subgroup style.
-
Subgroup space
-
Space above symbol and symbol label.
-
Column space
-
Equal column widths
-
Allow to split layer items into multiple columns.
-
Split layers
-
Spacing
- Διάκενο
+
Title alignment:
-
Left
- Αριστερά
+
Center
- Κέντρο
+
Right
- Δεξιά
+
Update legend. User defined labels are preserved.
-
Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
-
...
- ...
+
Auto update
-
Title font...
-
Subgroup font...
-
Group font...
-
Item font...
-
Symbol width
- Πλάτος Συμβόλου
+
Symbol height
- Ύψος Συμβόλου
+
WMS LegendGraphic
-
Legend width
-
Legend height
-
Space above text using group style.
-
Group Space
-
Symbol space
-
Space between symbol icon and symbol label (symbol label left margin).
-
Icon label space
-
Box space
-
Space below title.
-
Title space
-
@@ -17750,7 +17689,7 @@ Please try a lower resolution or a smaller papersize
&Duplicate
-
Specific
-
Template error
-
Error, template file not found
-
Error, could not read file
- Σφάλμα, δεν μπόρεσε να διαβάσει το αρχείο
+
Composer error
-
Error, could not create composer
-
Loading template into composer...
-
Error, could not load template file
-
Choose template
-
Composer templates
-
File system error
-
Error, could not open or create local directory
-
Duplicating composer...
-
Duplicate Composer
-
Composer duplication failed.
-
@@ -17870,7 +17809,7 @@ Please try a lower resolution or a smaller papersize
New from template
-
Open template directory
-
QgsComposerMap
- Map %1
Χάρτης %1
- Map will be printed here
Χάρτης θα τυπωθεί εδώ
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Απεικόνιση
- Rectangle
Ορθογώνιο
- Solid
Στερεό
- Cross
Σταυρός
- Markers
-
-
- Decimal
Δεκαδικές μοίρες
- DegreeMinute
ΜοίρεςΛεπτά
- DegreeMinuteSecond
-
- No frame
+
+
+ Zebra
-
- Map scale changed
-
- Map rotation changed
-
- Map extent changed
-
- Select font color
-
Select grid frame color
-
Select grid frame fill color
-
- Canvas items toggled
-
- None
Κανένα
- Overview frame style changed
-
- Overview centering mode changed
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Μονάδες χάρτη
-
-
- Millimeter
- Χιλιοστά
-
-
- Centimeter
-
-
- change...
- αλλαγή...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
-
- Grid interval changed
-
- Grid offset changed
-
- Grid line style changed
-
- Grid type changed
-
- Grid cross width changed
+
+
+ Annotation font changed
-
- Label font changed
+
+
+ Annotation distance changed
-
- Annotation format changed
-
- Annotation toggled
-
- Changed annotation precision
-
- Changed grid frame style
-
- Changed grid frame width
+
+
+ Changed grid frame line thickness
-
- Grid frame color changed
-
- Grid frame first fill color changed
-
- Grid frame second fill color changed
-
- Inside frame
Μέσα πλαίσιο
- Outside frame
Εξωτερικό πλαίσιο
- Disabled
-
- Horizontal
Οριζόντια
- Vertical
Κάθετα
- Annotation position changed
-
- Changed annotation direction
-
- Map %1
Χάρτης %1
@@ -18239,376 +18116,290 @@ Please try a lower resolution or a smaller papersize
Map Options
-
- Map
Χάρτης
- Main properties
- Κύριες ιδιότητες
+
- Update preview
Ενημέρωση προεπισκόπησης
- Scale
Κλίμακα
- Map rotation
-
- Draw map canvas items
-
- Lock layers for map item
Κλείδωμα επιπέδων για το στοιχέιο του χάρτη
- Extents
Έκταση
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
Ορίστε την έκταση σε αυτή του καμβά του χάρτη
- X min
X min
- View extent in map canvas
-
- Controlled by atlas
-
- Margin around feature
-
- %
- %
+
- Fixed scale
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
- Predefined scale (best fit)
-
+ Show grid
+
+
+ Grid &type
- &Τύπος πλέγματος
+ &Τύπος πλέγματος
- Offset
- Μετατόπιση
+
- mm
χιλιοστά
- Blend mode
-
- Interval
-
- Grid frame
-
- Frame size
-
- Frame line thickness
-
- Color...
- Χρώμα...
+
- Frame fill colors
-
- Marker style
- Στύλ συμβόλου
-
-
- Overview blending mode
-
- Invert overview
-
- Center on overview
-
- X
Χ
- °
-
- Y
Υ
- Cross width
Πλάτος Τομής
- Frame style
-
- Line style
-
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
-
-
- CRS
-
-
- change...
αλλαγή...
- Interval units
-
-
- Map unit
- Μονάδες χάρτη
-
-
- Millimeter
- Χιλιοστά
-
-
- Centimeter
-
-
- No frame
-
-
- Zebra
-
-
- Draw coordinates
-
- Format
-
- Left
Αριστερά
- Right
Δεξιά
- Top
Πάνω
- Bottom
Κάτω
- Font
Γραμματοσειρά
- Font...
Γραμματοσειρά...
- Font color
- Χρώμα γραμματοσειράς
-
-
- Distance to map frame
Απόσταση από το πλαίσιο του χάρτη
- Coordinate precision
Ακρίβεια Συντεταγμένης
- Font color...
-
- Overview
- Επισκόπηση
+
- Overview frame
-
- Overview style
-
- Change...
Αλλαγή...
@@ -18618,51 +18409,51 @@ Please try a lower resolution or a smaller papersize
Change item position
-
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
- Συνθέτης
+
- Picture expression eval error: %1
-
@@ -18675,64 +18466,64 @@ Please try a lower resolution or a smaller papersize
Picture changed
-
- Expression based image path
-
- Picture rotation changed
-
- Select new preview directory
Επιλέξτε το νέο κατάλογο προεπισκόπησης
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
-
- Rotation map changed
-
- Map %1
Χάρτης %1
- Creating icon for file %1
Δημιουργία εικονιδίου για το αρχείο %1
@@ -18752,17 +18543,17 @@ Please try a lower resolution or a smaller papersize
Main properties
- Κύριες ιδιότητες
+
Image source
-
Path
- Διαδρομή
+
Expression
- Έκφραση
+
Resize mode
- Λειτουργία αλλαγής μεγέθους
+
Placement
- Τοποθέτηση
+
Zoom
-
Stretch
-
Clip
-
Zoom and resize frame
-
Resize frame to image size
-
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
-
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Loading previews...
-
Image search paths
-
Image rotation
-
Sync with map
-
QgsComposerScaleBar
- units
μονάδες
- km
χλμ.
- m
μ.
- miles
μίλια
- ft
πόδια
- Nm
ναυτικά μίλια
@@ -18933,38 +18724,38 @@ Please try a lower resolution or a smaller papersize
QgsComposerScaleBarWidget
Single Box
Ενιαίο Πλαίσιο
Double Box
Διπλό πλαίσιο
Line Ticks Middle
Tick Γραμμής Μέσης
Line Ticks Down
Tick Γραμμής Κάτω
Line Ticks Up
Tick Γραμμής Πάνω
Numeric
Αριθμητικο
@@ -18976,7 +18767,7 @@ Please try a lower resolution or a smaller papersize
Middle
-
Nautical Miles
-
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
-
-
- Select stroke color
-
-
- Map %1
Χάρτης %1
- Scalebar map changed
-
- Scalebar line width
-
- Scalebar segment size
-
- Scalebar segments left
-
- Number of scalebar segments changed
-
- Scalebar height changed
-
- Scalebar font changed
-
- Scalebar font color changed
-
- Scalebar color changed
-
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
-
- Scalebar unit text
-
- Scalebar map units per segment
-
- Scalebar style changed
-
- Scalebar label bar space
-
- Scalebar box content space
-
- Scalebar alignment
-
- Scalebar changed to map units
-
- Scalebar changed to feet
-
- Scalebar changed to nautical miles
-
- Scalebar changed to meters
-
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -19161,7 +18927,7 @@ Please try a lower resolution or a smaller papersize
Main properties
- Κύριες ιδιότητες
+
Segments
-
Box margin
-
Labels margin
-
Join style
- Τύπος σύνδεσης
+
Cap style
-
Secondary fill color...
-
-
- Stroke color...
-
@@ -19298,39 +19059,39 @@ Please try a lower resolution or a smaller papersize
Ellipse
Έλλειψη
Rectangle
Ορθογώνιο
Triangle
Τρίγωνο
- Shape style changed
-
- Shape radius changed
-
- Shape type changed
-
@@ -19348,17 +19109,17 @@ Please try a lower resolution or a smaller papersize
Main properties
- Κύριες ιδιότητες
+
Corner radius
-
mm
-
Descending
- Φθίνουσα
+
Ascending
- Αύξουσα
+
Attribute
- Ιδιότητα
+
Sort Order
-
@@ -19405,38 +19166,38 @@ Please try a lower resolution or a smaller papersize
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
-
Table header alignment changed
-
Table layer changed
-
Table attribute settings
-
Table map changed
-
Table header font
-
Table content font
-
Table grid stroke
-
Table grid color
-
Table grid toggled
-
Table visible only toggled
-
@@ -19503,7 +19264,7 @@ Please try a lower resolution or a smaller papersize
Main properties
- Κύριες ιδιότητες
+
Refresh table data
-
Filter with
- Φιλτράρισμα με
+
...
- ...
+
Stroke width
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
- Αριστερά
+
Center
- Κέντρο
+
Right
- Δεξιά
+
@@ -19739,109 +19500,109 @@ Please try a lower resolution or a smaller papersize
QgsComposition
- Label added
Η ετικέτα προστέθηκε
- Map added
Ο χάρτης προστέθηκε
- Arrow added
Το βέλος προστέθηκε
- Scale bar added
Η κλίμακα προστέθηκε
- Shape added
Το γραφικό προστέθηκε
- Picture added
Η εικόνα προστέθηκε
- Legend added
Το υπόμημα προστέθηκε
- Table added
Ο πίνακας προστέθηκε
- Aligned items left
-
- Aligned items horizontal center
-
- Aligned items vertical center
-
- Aligned items right
-
- Aligned items top
-
- Aligned items bottom
-
- Items locked
-
- Items unlocked
-
- Item z-order changed
-
- Remove item group
-
- Frame deleted
Το πλαίσιο διαγράφηκε
- Item deleted
Το αντικείμενο διαγράφηκε
- Multiframe removed
-
@@ -19896,148 +19657,148 @@ Please try a lower resolution or a smaller papersize
Landscape
Τοπίο
Portrait
Πορτρέτο
Map %1
- Χάρτης %1
+
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
Ειδικό
@@ -20055,123 +19816,109 @@ Please try a lower resolution or a smaller papersize
Χαρτί και ποιότητα
- Presets
Προεπιλεγμένα
- ...
- ...
-
-
- Width
Πλάτος
- Height
Ύψος
- Units
Μονάδες
- Number of pages
Αριθμός σελίδων
- Orientation
Προσανατολισμός
- Export resolution
Ανάλυση
- Print as raster
Εκτύπωση ως κάνναβο
-
- Snap tolerance
-
-
- px
-
Change...
- Αλλαγή...
+
- Page background
-
- Grid
+
+
+ dpi
dpi
- World file on
-
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
χιλιοστά
- Grid offset
-
- x:
x:
- y:
y:
+ Spacing
- Διάκενο
+ Διάκενο
+ Snap to alignments
+
+
+ Tolerance
- Ανοχή
+ Ανοχή
@@ -20319,7 +20066,7 @@ Please try a lower resolution or a smaller papersize
Context help
-
The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
%1 of
%2PROJ.4: %3 +to %4
Error: %5
-
@@ -20396,12 +20143,12 @@ Error: %5
continuous (multi)
-
variants
-
@@ -20409,24 +20156,24 @@ Error: %5
Selections by theme
-
All by author
-
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
All Ramps (%1)
-
%1 directory details
-
%1 gradient details
-
@@ -20459,7 +20206,7 @@ and current file is [%3]
cpt-city color ramp
-
Source
- Πηγή
+
Save as standard gradient
-
@@ -20542,7 +20289,7 @@ and current file is [%3]
Control rendering order
-
@@ -20563,12 +20310,12 @@ and current file is [%3]
new CRS
-
The proj4 definition of '%1' is not valid.
-
Copy
existing CRS
-
Add new CRS
-
Catch
-
Switch to catching widgets in main application
-
Data defined override
-
expression
-
Attribute field
-
No matching field types found
-
Data definition description
-
undefined
-
Parse error: %1
-
'%1' field missing
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
yes
- ναι
+
no
- όχι
+
<b>Usage:</b><br>%1<br>
-
<b>Expected input:</b><br>%1<br>
-
<b>Valid input types:</b><br>%1<br>
-
<b>Current definition %1:</b><br>%2
-
bool [<b>1</b>=True|<b>0</b>=False]
-
string of variable length
-
int [<= 0 =>]
-
int [>= 0]
-
int [>= 1]
-
double [<= 0.0 =>]
-
double [>= 0.0]
-
double coord [<b>X,Y</b>] as <= 0.0 =>
-
double [-180.0 - 180.0]
-
int [0-100]
-
string [<b>r,g,b</b>] as int 0-255
-
string [<b>r,g,b,a</b>] as int 0-255
-
@@ -21065,22 +20812,22 @@ and current file is [%3]
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -21088,68 +20835,68 @@ and current file is [%3]
Form
-
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
- Προεπιλογή
+
custom
-
preview
-
@@ -21157,7 +20904,7 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Hold dialog open
-
Copyright Label Decoration
-
Enable copyright label
-
&Enter your copyright label here:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
&Placement
-
Bottom Left
- Κάτω αριστερά
+
Top Left
-
Bottom Right
- Κάτω δεξιά
+
Layer CRS must be equal to project CRS
-
@@ -21419,7 +21166,7 @@ p, li { white-space: pre-wrap; }
Grid properties
-
Interval X
-
Interval Y
-
Grid type
-
Line symbol
-
Draw annotation
-
Annotation direction
-
Marker symbol
-
Update Interval / Offset from
-
Canvas Extents
-
Active Raster Layer
-
Marker
-
Horizontal
-
Vertical
-
Boundary direction
-
Horizontal and Vertical
-
@@ -21570,12 +21317,12 @@ p, li { white-space: pre-wrap; }
North Arrow Decoration
-
Preview of north arrow
-
Placement
- Τοποθέτηση
+
Placement on screen
-
Enable North Arrow
-
Set direction automatically
-
Pixmap not found
- Δε βρέθηκε το pixmap
+
@@ -21653,22 +21400,22 @@ p, li { white-space: pre-wrap; }
Tick Down
-
Tick Up
-
Bar
-
Box
- Πλαίσιο
+
Scale Bar Decoration
-
Scale bar style
-
Select the style of the scale bar
-
Tick Down
-
Tick Up
-
Box
- Πλαίσιο
+
Bar
-
Color of bar
-
Size of bar
-
Enable scale bar
-
Automatically snap to round number on resize
-
metres/km
-
feet/miles
-
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -21933,122 +21680,122 @@ p, li { white-space: pre-wrap; }
No layer name
-
Please enter a layer name before adding the layer to the map
-
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Invalid regular expression
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Choose a delimited text file to open
-
Text files
-
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
Regular expression is not valid
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
All files
- Όλα τα αρχεία
+
@@ -22056,66 +21803,66 @@ p, li { white-space: pre-wrap; }
Create a Layer from a Delimited Text File
-
File Name
-
Full path to the delimited text file
-
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
-
Layer name
- Όνομα επιπέδου
+
Name to display in the map legend
-
Name displayed in the map legend
-
Browse to find the delimited text file to be processed
-
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
-
Browse...
- Περιήγηση...
+
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
Encoding
- Κωδικοποίηση
+
Select the file encoding
-
X and Y coordinates are expressed in degrees/minutes/seconds
-
DMS coordinates
-
Geometry field
-
Name of the field containing well known text value
-
Geometry type
- Τύπος γεωμετρίας
+
Detect
-
Point
- Σημείο
+
Line
-
Polygon
- Πολύγωνο
+
Record options
-
Field options
-
File format
-
Number of header lines to discard
-
The number of lines to discard from the beginning of the file
-
Field names are read from the first record. If not selected then fields are numbered
-
First record has field names
-
CSV (comma separated values)
-
Fields are defined by the specified delimiter, quote, and escape characters
-
Custom delimiters
-
Regular expression delimiter
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use spatial index
-
Use an index to improve performance of subset filters (set in layer properties)
-
Use subset index
-
Watch for changes to the file by other applications while QGIS is running
-
Watch file
-
Geometry definition
-
Geometry is a point defined by X and Y coordinate fields
-
Point coordinates
-
Geometry is read as a well known text string from the selected fields
-
Well known text (WKT)
-
The file contains only attribute information - it will not be displayed on the map
-
No geometry (attribute only table)
-
Trim leading and trailing spaces from fields
-
Trim fields
-
Discard empty fields in each record
-
Discard empty fields
-
Number fields use comma for a decimal separator
-
Decimal separator is comma
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
- Έκφραση
+
Regular expression used to split each line into fields
-
Layer settings
-
Sample data
-
Colon
-
<p align="right">X field</p>
-
Name of the field containing x values
-
<p align="right">Y field</p>
-
Name of the field containing y values
-
@@ -22521,7 +22268,7 @@ p, li { white-space: pre-wrap; }
Category label
-
@@ -22540,12 +22287,12 @@ p, li { white-space: pre-wrap; }
Around Point
-
Over Point
-
Horizontal
-
Free
-
On line
- Πάνω στη γραμμή
+
Above line
- Πάνω από τη γραμμή
+
Below Line
-
Map orientation
-
Pie chart
-
Text diagram
-
x-height
-
Area
-
The diagram type '%1' is unknown. A default type is selected for you.
-
Bar length: Scale linearly, such as the following value matches the specified size.
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Transparency: %1%
-
Diagrams: No attributes added.
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Pen color
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -22761,7 +22508,7 @@ p, li { white-space: pre-wrap; }
Bar width
-
Start Angle
-
Only show diagrams with a size inside the specified range.
-
Hide diagrams with a size outside the specified range.
-
Scale dependent visibility
-
Size units
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Attribute
- Ιδιότητα
+
Edit expression
-
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
Increase size of small diagrams
-
Minimum size
-
Data defined position
- Καθορισμός θέσης από τα δεδομένα
+
Automated placement settings
-
Label placement
-
Bar Orientation
-
Down
- Μετακίνηση κάτω
+
Attributes
- Χαρακτηριστικά
+
Available attributes
-
Add expression
-
Assigned attributes
-
Drag and drop to reorder
-
%1 radians
-
%1 gon
-
@@ -23058,30 +22805,30 @@ Leave empty to automatically apply the maximum value.
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
Run layer action
-
Open form
-
Attribute table
- Πίνακας Περιγραφικών Χαρακτηριστικών
+
%1 features loaded.
-
@@ -23109,17 +22856,17 @@ Parser error:
...
- ...
+
Expression
- Έκφραση
+
Column Preview
-
@@ -23127,12 +22874,12 @@ Parser error:
Form
-
Dummy Text
-
@@ -23140,12 +22887,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -23153,17 +22900,17 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
...
- ...
+
No symbology
-
Feature symbology
-
Symbol layer symbology
-
Select all
- Επιλογή όλων
+
Unselect all
-
Export features intersecting the current map extent
-
@@ -23212,12 +22959,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -23225,52 +22972,52 @@ Parser error:
Symbol width
- Πλάτος Συμβόλου
+
Symbol height
- Ύψος Συμβόλου
+
Rotation
- Περιστροφή
+
Outline width
- Πλάτος περιγράμματος
+
Fill color
-
Border color
- Χρώμα περιγράμματος
+
Symbol name
- Όνομα Συμβόλου
+
Offset
- Μετατόπιση
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -23283,7 +23030,7 @@ Parser error:
Cancel &All
-
@@ -23291,37 +23038,37 @@ Parser error:
Search method
-
Chain (fast)
-
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
FALP (fastest)
-
Number of candidates
-
(i.e. including colliding objects)
-
Draw text as outlines (recommended)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
Show all labels and features for all layers
-
Automated Placement Engine
-
Show candidates (for debugging)
-
@@ -23387,25 +23134,25 @@ Parser error:
Dialog
- Διάλογος
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
Expression string builder
-
@@ -23431,12 +23178,12 @@ p, li { white-space: pre-wrap; }
(String Concatenation)
-
Joins two values together into a string
-
'Dia' || Diameter
-
Search
- Αναζήτηση
+
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Parser Error
-
Eval Error
-
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
-
Load top 10 unique values
-
Load all unique values
-
@@ -23554,47 +23301,47 @@ p, li { white-space: pre-wrap; }
Form
-
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Operators
- Τελεστές
+
Equal operator
-
Addition operator
-
Subtraction operator
-
Division operator
-
Multiplication operator
-
Power operator
-
String Concatenation
-
Open Bracket
-
Close Bracket
-
Output preview is generated <br> using the first feature from the layer.
-
Output preview:
-
Expression
- Έκφραση
+
@@ -23703,7 +23450,7 @@ p, li { white-space: pre-wrap; }
Select By Expression
-
Select within selection
-
@@ -23741,22 +23488,22 @@ p, li { white-space: pre-wrap; }
layer
- επίπεδο
+
map view
-
user defined
- ορισμένο από το χρήστη
+
Extent (current: %1)
-
@@ -23764,37 +23511,37 @@ p, li { white-space: pre-wrap; }
Form
-
West
- Δύση
+
East
- Ανατολή
+
North
- Βορράς
+
South
- Νότος
+
Layer extent
-
Map view extent
-
@@ -23810,7 +23557,7 @@ p, li { white-space: pre-wrap; }
Dialog
- Διάλογος
+
@@ -23819,18 +23566,18 @@ p, li { white-space: pre-wrap; }
Not available for layer
-
Only update %1 selected features
-
Evaluation error
-
An error occured while evaluating the calculation string:
%1
-
The expression is invalid see (more info) for details
-
@@ -23900,7 +23647,7 @@ p, li { white-space: pre-wrap; }
Width of complete output. For example 123,456 means 6 as field width.
- Συνολικό μέγεθος προορισμού. Για παράδειγμα, 123,456 σημαίνει μέγεθος πεδίου 6.
+
Expression dialog
-
@@ -23948,7 +23695,7 @@ p, li { white-space: pre-wrap; }
Type name
-
Edit widget
-
Layer
- Επίπεδο
+
Field
- Πεδίο
+
Name conflict
-
The attribute could not be inserted. The name already exists in the table.
-
Added attribute
-
Unique values editable
-
Value map
-
Edit range
-
Slider range
-
Dial range
-
File name
-
Immutable
-
Checkbox
-
Value relation
-
UUID generator
-
Photo
-
Web view
-
Editor Widget
-
Select edit form
-
UI file
-
@@ -24128,23 +23875,23 @@ p, li { white-space: pre-wrap; }
Field calculator
- Επεξεργασία πεδίων
+
Click to toggle table editing
-
Toggle editing mode
-
New column
-
Delete column
- Διαγραφή στήλης
+
Fields
- Πεδία
+
Relations
-
...
- ...
+
Edit UI
-
Suppress attribute form pop-up after feature creation
-
Default
- Προεπιλογή
+
On
-
Off
-
Autogenerate
-
Drag and drop designer
-
Provide ui-file
-
Attribute editor layout:
-
Python Init function
-
@@ -24274,12 +24021,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
...
- ...
+
Select a file
- Επιλέξτε ένα αρχείο
+
@@ -24288,13 +24035,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
- Χιλιοστά
+
Map unit
- Μονάδες χάρτη
+
@@ -24315,7 +24062,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Form annotation
-
GPS Device Editor
-
Track download
-
Track upload
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
-
@@ -24594,22 +24341,22 @@ p, li { white-space: pre-wrap; }
No fix
-
Differential
-
Non-differential
-
No position
-
Save GPS log file as
-
&Add feature
-
&Add Point
-
&Add Line
-
&Add Polygon
-
@@ -24717,7 +24464,7 @@ Errors: %2
&Add feature
-
Add track point
-
Reset track
-
Signal
-
Satellite
-
Debug
-
&Connect
- &Σύνδεση
+
latitude of position fix (degrees)
-
longitude of position fix (degrees)
-
antenna altitude with respect to geoid (mean sea level)
-
Time of fix
-
date/time of position fix (UTC)
-
speed over ground
-
track direction (degrees)
-
Horizontal Dilution of Precision
-
HDOP
-
Vertical Dilution of Precision
-
VDOP
-
Position Dilution of Precision
-
PDOP
-
GPS receiver configuration 2D/3D mode: Automatic or Manual
-
position fix dimensions: 2D, 3D or No fix
-
Dimensions
- Διαστάσεις
+
quality of the position fix: Differential, Non-differential or No position
-
Quality
-
position fix status: Valid or Invalid
-
Status
-
number of satellites used in the position fix
-
Satellites
-
H accurancy
-
V accurancy
-
Connection
-
Serial device
-
Refresh serial device list
-
Device
-
gpsd
-
Internal
-
Digitizing
- Ψηφιοποίηση
+
Automatically add points
-
Track width in pixels
-
save layer after every feature added
-
Automatically save added feature
-
save GPS data (NMEA sentences) to a file
-
browse for log file
-
Map centering
-
when leaving
-
% of map extent
-
Cursor
-
&GPS Tools
-
&Create new GPX layer
-
GPS eXchange file
- Αρχείο ανταλλαγής GPS
+
Unable to create a GPX file with the given name. Try again with another name or in another directory.
-
GPS eXchange format
-
Waypoints from a route
-
Waypoints from a track
-
Route from waypoints
-
Track from waypoints
-
GPS eXchange format (*.gpx)
-
@@ -25493,17 +25240,17 @@ Please reselect a valid file.
Dataset Description
-
Band %1
-
X: %1 Y: %2 Bands: %3
-
Origin
-
Pixel Size
-
Band
- Κανάλι
+
Format not supported
- Ο μορφότυπος δεν υποστηρίζεται
+
Cannot read data
-
Cannot get GDAL raster band: %1
-
@@ -25572,17 +25319,17 @@ Please reselect a valid file.
Retrieving tables of %1...
- Ανάκτηση πινάκων %1...
+
Scanning column %1.%2.%3...
-
Table retrieval finished.
- Η ανάκτηση του πίνακα ολοκληρώθηκε
+
@@ -25655,57 +25402,57 @@ Please reselect a valid file.
ANSI A (Letter; 8.5x11 inches)
-
ANSI B (Tabloid; 11x17 inches)
-
ANSI C (17x22 inches)
-
ANSI D (22x34 inches)
-
ANSI E (34x44 inches)
-
Arch A (9x12 inches)
-
Arch B (12x18 inches)
-
Arch C (18x24 inches)
-
Arch D (24x36 inches)
-
Arch E (36x48 inches)
-
Arch E1 (30x42 inches)
-
@@ -25733,7 +25480,7 @@ Please reselect a valid file.
Residual units
-
Use map units if possible
-
Left margin
-
Right margin
-
Show Georeferencer window docked
-
PDF map
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
@@ -25814,7 +25561,7 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
Georeferencer - %1
-
GCP file
-
Panels
- Πίνακες
+
None
- Κανένα
+
Coordinate of image(column/line)
-
Mean error [%1]
-
Translation (%1, %2)
-
Scale (%1, %2)
-
Rotation: %1
-
Mean error: %1
-
GDAL script
-
Thin plate spline (TPS)
-
Projective
-
Georeferencer
-
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
Local histogram stretch
-
Full histogram stretch
- Πλήρης επιμήκυνση ιστογράμματος
+
@@ -26374,7 +26121,7 @@ p, li { white-space: pre-wrap; }
DEM files
-
Open raster file
-
Invalid Path: The file is either unreadable or does not exist
-
Invalid URL:
-
Do you want to add the datasource anyway?
-
Open 3D model file
-
Model files
-
@@ -26418,209 +26165,209 @@ p, li { white-space: pre-wrap; }
Globe Settings
- Ρυθμίσεις Globe
+
Elevation
-
Type
- Τύπος
+
Raster
-
TMS
-
URL/File
-
...
- ...
+
Up
-
Map
- Χάρτης
+
Base Layer
-
URL
- URL
+
TextLabel
- Ετικέτα κειμένου
+
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Down
- Μετακίνηση κάτω
+
Add
- Προσθήκη
+
Remove
- Αφαίρεση
+
Cache
- Cache
+
Path
- Διαδρομή
+
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Model
-
Point Layer
-
3D Model
-
Stereo
-
Stereo Mode
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -26629,7 +26376,7 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Error: %1 on line %2, column %3
-
WFS
- WFS
+
GML Getfeature network request failed with error: %1
-
Network
- Δίκτυο
+
@@ -26662,7 +26409,7 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
@@ -26670,22 +26417,22 @@ p, li { white-space: pre-wrap; }
Millimeter
- Χιλιοστά
+
Map unit
- Μονάδες χάρτη
+
Color (start)
-
Color (end)
-
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
QgsGraduatedSymbolRendererV2Model
- Symbol
Σύμβολο
- Value
Τιμή
- Label
Ετικέτα
@@ -26796,12 +26543,12 @@ p, li { white-space: pre-wrap; }
Quantile (Equal Count)
-
Natural Breaks (Jenks)
-
Pretty Breaks
-
Invert
-
Προηγμένες επιλογές
- Symbol levels...
-
- Error
Σφάλμα
- There are no available color ramps. You can add them in Style Manager.
Δεν υπάρχουν διαθέσιμες σετ χρώματος. Μπορείτε να τις προσθέσετε στον Διαχείριση στυλ.
- The selected color ramp is not available.
Το επιλεγμένο σετ χρώματος δεν είναι διαθέσιμο.
- Warning
Προειδοποίηση
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
-
- Renderer creation has failed.
-
@@ -26930,7 +26677,7 @@ Press cancel to abort breaks calculation or OK to continue.
Tab 1
-
<br>command: %1 %2<br>%3<br>%4
-
Remove the selected layer(s) from canvas before continue.
-
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Είστε σιγουρος ότι θέλετε να διαγράψετε %n επιλεγμένο επίπεδο;
- Είστε σιγουρος ότι θέλετε να διαγράψετε %n επιλεγμένα επίπεδα;
-
+ Είστε σιγουρος ότι θέλετε να διαγράψετε %n επιλεγμένο επίπεδο; Είστε σιγουρος ότι θέλετε να διαγράψετε %n επιλεγμένα επίπεδα;
Background
- Φόντο
+
Highlight
-
Mode
-
Snapping in screen pixels
-
Disp
-
Index
-
Release selected
-
@@ -27463,7 +27207,7 @@ Press cancel to abort breaks calculation or OK to continue.
Release vertex
-
@@ -27484,7 +27228,7 @@ Press cancel to abort breaks calculation or OK to continue.
Release selected
-
@@ -27517,7 +27261,7 @@ Press cancel to abort breaks calculation or OK to continue.
Undo last vertex
-
Release the line
-
<font color='red'>Enter a name!</font>
-
<font color='red'>This is name of the source!</font>
-
<font color='red'>Exists!</font>
-
Overwrite
-
@@ -27601,7 +27345,7 @@ Press cancel to abort breaks calculation or OK to continue.
Mapcalc tools
-
Add constant value
-
Add operator or function
-
Delete selected item
- Διαγραφή επιλεγμένου αντικειμένου
+
Subtraction
-
Multiplication
-
Modulus
-
Exponentiation
-
Equal
-
Not equal
-
Greater than
-
Greater than or equal
-
Less than or equal
-
Absolute value of x
-
Inverse tangent of x (result is in degrees)
-
Inverse tangent of y/x (result is in degrees)
-
Current column of moving window (starts with 1)
-
Cosine of x (x is in degrees)
-
Convert x to double-precision floating point
-
Current east-west resolution
-
Exponential function of x
-
Convert x to single-precision floating point
-
Decision: 1 if x not zero, 0 otherwise
-
Decision: a if x not zero, 0 otherwise
-
Decision: a if x not zero, b otherwise
-
Decision: a if x > 0, b if x is zero, c if x < 0
-
Convert x to integer [ truncates ]
-
Check if x = NULL
-
Natural log of x
-
Log of x base b
-
Largest value
-
Median value
-
Smallest value
-
Mode value
-
1 if x is zero, 0 otherwise
-
Current north-south resolution
-
NULL value
-
Random value between a and b
-
Round x to nearest integer
-
Current row of moving window (Starts with 1)
-
Sine of x (x is in degrees)
sin(x)
-
Square root of x
sqrt(x)
-
Tangent of x (x is in degrees)
tan(x)
-
Current x-coordinate of moving window
-
Current y-coordinate of moving window
-
Output
- Αποτέλεσμα
+
Cannot get current region
-
Cannot check region of map %1
-
Cannot get region of map %1
-
Cannot create 'mapcalc' directory in current mapset.
-
New mapcalc
-
Enter new mapcalc name:
-
Enter vector name
-
The file already exists. Overwrite?
-
Save mapcalc
-
File name empty
-
Cannot open mapcalc file
-
The mapcalc schema (%1) not found.
-
Cannot open mapcalc schema (%1)
-
Cannot read mapcalc schema (%1):
-
%1
at line %2 column %3
-
@@ -28034,18 +27778,18 @@ at line %2 column %3
The module file (%1) not found.
-
Cannot open module file (%1)
-
Cannot read module file (%1)
-
%1
at line %2 column %3
-
Module %1 not found
-
Cannot find man page %1
-
Please ensure you have the GRASS documentation installed.
-
Not available, description not found (%1)
-
Not available, cannot open description (%1)
-
Not available, incorrect description (%1)
-
Cannot get input region
-
Input %1 outside current region!
-
Use Input Region
-
Output %1 exists! Overwrite?
-
Cannot find module %1
-
Cannot start module: %1
-
<B>Successfully finished</B>
-
<B>Finished with error</B>
-
<B>Module crashed or killed</B>
-
@@ -28148,7 +27892,7 @@ at line %2 column %3
GRASS Module
-
Output
- Αποτέλεσμα
+
Attribute field
-
'layer' attribute in field tag with key= %1 is missing.
-
@@ -28214,12 +27958,12 @@ at line %2 column %3
%1: missing value
-
%1: directory does not exist
-
@@ -28239,32 +27983,32 @@ at line %2 column %3
Cannot find layeroption %1
-
Cannot find whereoption %1
-
Password
-
Select a layer
-
PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
-
%1: no input
- %1: χωρίς προέλευση (Input)
+
@@ -28287,43 +28031,43 @@ at line %2 column %3
Cannot find typeoption %1
-
Cannot find values for typeoption %1
-
Cannot find layeroption %1
-
GRASS element %1 not supported
-
Use region of this map
-
Select a layer
-
%1 (band %2)
-
Cannot get provider
-
Browse
- Αναζήτηση
+
Output file
- Αρχείο προορισμού
+
GeoTIFF
- GeoTIFF
+
Cannot parse version_min %1
-
Cannot parse version_max %1
-
%1: missing value
-
@@ -28375,7 +28119,7 @@ at line %2 column %3
Selected categories
-
@@ -28404,112 +28148,112 @@ at line %2 column %3
Cannot find module %1
-
Cannot start module %1
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot read module description (%1):
-
%1
at line %2 column %3
-
Region
-
Input layers
-
Current map canvas
-
Cannot find key %1
-
<< Hide advanced options
-
Show advanced options >>
-
Item with key %1 not found
-
Item with id %1 not found
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
-
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
Cannot set region of map %1
-
@@ -28522,55 +28266,55 @@ at line %2 column %3
Location 1
-
System mapset
-
User's mapset
-
Location 2
-
Enter path to GRASS database
-
The directory doesn't exist!
-
No writable locations, the database is not writable!
-
Enter location name!
-
The location exists!
-
Selected projection is not supported by GRASS!
-
Cannot create projection.
-
Cannot reproject previously set region, default region set.
-
North must be greater than south
-
East must be greater than west
-
Regions file (%1) not found.
-
Cannot open locations file (%1)
-
Cannot read locations file (%1):
-
%1
at line %2 column %3
-
Cannot create QgsCoordinateReferenceSystem
-
Cannot reproject selected region.
-
Cannot reproject region
-
Enter mapset name.
-
The mapset already exists
-
Location:
-
Mapset:
-
Create location
-
Cannot create new location: %1
-
Create mapset
-
Cannot create new mapset directory
-
Cannot open DEFAULT_WIND
-
Cannot open WIND
-
New mapset
-
New mapset successfully created, but cannot be opened: %1
-
New mapset successfully created and set as current working mapset.
-
@@ -28726,17 +28470,17 @@ at line %2 column %3
New Mapset
-
GRASS Database
-
Tree
-
Example directory tree:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
-
Database Error
- Σφάλμα Βάσης Δεδομενων
+
Database:
-
Browse...
- Περιήγηση...
+
Select existing directory or create a new one:
-
GRASS Location
-
Location
-
Select location
-
Create new location
-
Location Error
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
-
Projection
-
Projection Error
-
Coordinate system
-
Not defined
-
Default GRASS Region
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
-
Set current QGIS extent
-
Set
-
Region Error
-
Mapset
-
New mapset:
-
Mapset Error
-
<p align="center">Existing mapsets</p>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
-
Create New Mapset
-
Location:
-
Mapset:
-
@@ -28938,7 +28682,7 @@ p, li { white-space: pre-wrap; }
GrassVector
-
Plugins
- Πρόσθετα
+
Add GRASS raster layer
-
Open GRASS tools
-
Display Current Grass Region
-
Edit Current Grass Region
-
Edit Grass Vector layer
-
Open Mapset
-
New Mapset
-
Close Mapset
-
Add GRASS Vector Layer
-
Adds a GRASS vector layer to the map canvas
-
Adds a GRASS raster layer to the map canvas
-
Open GRASS Tools
-
Displays the current GRASS region as a rectangle on the map canvas
-
Edit the current GRASS region
-
Edit the currently selected GRASS vector layer.
-
Create New Grass Vector
-
&GRASS
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
Cannot open GRASS vector:
%1
-
GRASS Edit is already running.
-
New vector name
-
Cannot create new vector: %1
-
New vector created but cannot be opened by data provider.
-
Cannot start editing.
-
Cannot open vector for update.
- Αδύνατο το άνοιγμα του διανύσματος για ενημέρωση.
+
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot open the mapset. %1
-
Cannot close mapset. %1
-
Cannot close current mapset. %1
-
Cannot open GRASS mapset. %1
-
@@ -29167,7 +28911,7 @@ p, li { white-space: pre-wrap; }
GRASS vector map %1 does not have topology. Build topology?
-
@@ -29175,22 +28919,22 @@ p, li { white-space: pre-wrap; }
cellhd file %1 does not exist
-
Groups not yet supported
-
Format not supported
- Ο μορφότυπος δεν υποστηρίζεται
+
Cannot read data
-
@@ -29205,17 +28949,17 @@ p, li { white-space: pre-wrap; }
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot write region
-
@@ -29223,7 +28967,7 @@ p, li { white-space: pre-wrap; }
GRASS Region Settings
-
North
- Βορράς
+
West
- Δύση
+
East
- Ανατολή
+
South
- Νότος
+
Select the extent by dragging on canvas
or change the following values
-
Select GRASS Vector Layer
-
Select GRASS Raster Layer
-
Select GRASS mapcalc schema
-
Select GRASS Mapset
-
Choose existing GISDBASE
-
Wrong GISDBASE, no locations available.
-
Wrong GISDBASE
-
Select a map.
-
No map
-
No layer
-
No layers available in this map
-
@@ -29360,42 +29104,42 @@ or change the following values
Add GRASS Layer
-
Gisdbase
-
Location
-
Mapset
-
Map name
-
Select or type map name (wildcards '*' and '?' accepted for rasters)
-
Layer
- Επίπεδο
+
Browse...
- Περιήγηση...
+
@@ -29408,7 +29152,7 @@ or change the following values
Ctrl+Shift+C
- Ctrl+Shift+C
+
Cannot rename the lock file %1
-
@@ -29428,48 +29172,48 @@ or change the following values
GRASS Tools
-
GRASS Tools: %1/%2
-
GRASS Direct Tools
-
Modules Tree
-
Modules List
-
Browser
-
Direct Modules Tree
-
Direct Modules List
-
Cannot start command shell (%1)
-
GRASS Shell is not compiled.
-
The config file (%1) not found.
-
Cannot open config file (%1).
-
Cannot read config file (%1):
-
%1
at line %2 column %3
-
@@ -29512,12 +29256,12 @@ at line %2 column %3
Grass Tools
-
Modules Tree
-
Modules List
-
Filter
- Φίλτρο
+
Direct Modules Tree
-
Direct Modules List
-
@@ -29552,60 +29296,60 @@ at line %2 column %3
Add feature
- Προσθήκη Αντικειμένου
+
Start editing failed
- Έναρξη επεξεργασίας απέτυχε
+
Provider cannot be opened for editing
- Πάροχος υπηρεσιών δεν μπορεί να ανοιχθεί για επεξεργασία
+
Stop editing
- Τερματισμός επεξεργασίας
+
Do you want to save the changes to layer %1?
- Θέλετε να αποθηκεύσετε τις αλλαγές στο %1 επίπεδο;
+
Error
- Σφάλμα
+
Problems during roll back
- Προβλήματα κατά τη διάρκεια επαναφοράς
+
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
- Σφάλματα:%1
+
Show more
- Εμφάνιση περισσοτέρων
+
@@ -29613,12 +29357,12 @@ at line %2 column %3
Browse
- Αναζήτηση
+
Layer name
- Όνομα επιπέδου
+
Provider
- Πάροχος
+
Datasource
-
Select file to replace '%1'
-
Please select exactly one file.
-
Select new directory of selected files
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -29682,7 +29423,7 @@ at line %2 column %3
Handle bad layers
-
@@ -29690,12 +29431,12 @@ at line %2 column %3
Handle bad layers
-
%1 of %2 bad layers were not fixable.
-
@@ -29703,7 +29444,7 @@ at line %2 column %3
QGIS Help
-
@@ -29711,12 +29452,12 @@ at line %2 column %3
QGIS Help
-
about:blank
- σχετικά: κενό
+
@@ -29724,17 +29465,17 @@ at line %2 column %3
HTML annotation
-
Delete
- Διαγραφή
+
html
-
@@ -29742,72 +29483,69 @@ at line %2 column %3
WMS Server responded unexpectedly with HTTP Status Code %1 (%2)
-
Received %1 of %2 bytes
-
Received %1 bytes (total unknown)
-
HTTP response completed, however there was an error: %1
-
HTTP transaction completed, however there was an error: %1
-
Not connected
- Δεν υπάρχει σύνδεση
+
Looking up '%1'
-
Connecting to '%1'
-
Sending request '%1'
-
Receiving reply
-
Response is complete
-
Closing down connection
-
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
-
+
@@ -29820,7 +29558,7 @@ This may be a problem in your network connection or at the WMS server.
Distance coefficient P
-
@@ -29828,32 +29566,32 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Layer
- Επίπεδο
+
FID
-
Attribute
- Ιδιότητα
+
Value
- Τιμή
+
Expand tree.
-
...
- ...
+
Clear Results
-
Help
- Βοήθεια
+
Select identify mode
-
Mode
-
Select view mode for raster layers
-
View
-
Auto open form
-
Collapse tree.
-
New results will be expanded by default.
-
Copy selected feature to clipboard.
-
Print selected HTML response.
-
@@ -29927,48 +29665,48 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Feature
- Αντικείμενο
+
Value
- Τιμή
+
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
(Derived)
-
(Actions)
-
Edit feature form
-
View feature form
-
Tree
-
Graph
-
feature id
- Αναγνωριστικό αντικειμένου
+
Format
-
No attributes.
-
Zoom to feature
-
Copy feature
-
Toggle feature selection
-
Copy attribute value
-
Copy feature attributes
-
Copy GetFeatureInfo request URL
-
Clear results
-
Clear highlights
-
Highlight all
-
Highlight layer
-
Activate layer
-
Layer properties...
-
Expand all
-
Collapse all
-
Attributes changed
- Ιδιότητες άλλαξαν
+
Cannot print
-
Cannot print this item
-
@@ -30132,13 +29870,13 @@ This may be a problem in your network connection or at the WMS server.
Triangular interpolation (TIN)
-
Inverse Distance Weighting (IDW)
-
Output file name invalid
-
Please enter a valid output file name
-
Break lines
-
Structure lines
-
Save interpolated raster as...
-
@@ -30198,17 +29936,17 @@ This may be a problem in your network connection or at the WMS server.
Vector layers
-
Interpolation attribute
-
Use z-Coordinate for interpolation
-
Remove
- Αφαίρεση
+
Vector layer
-
Output
- Αποτέλεσμα
+
Interpolation method
-
Number of columns
-
Number of rows
-
Cellsize X
-
Cellsize Y
-
Set to current extent
-
Output file
-
Add result to project
-
@@ -30314,7 +30052,7 @@ This may be a problem in your network connection or at the WMS server.
&Interpolation
-
@@ -30323,7 +30061,7 @@ This may be a problem in your network connection or at the WMS server.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -30331,17 +30069,17 @@ This may be a problem in your network connection or at the WMS server.
Form
-
Sub renderer:
-
Merge polygons before rendering (slow)
-
@@ -30349,17 +30087,17 @@ This may be a problem in your network connection or at the WMS server.
Enter class bounds
-
Lower value
-
Upper value
-
@@ -30367,7 +30105,7 @@ This may be a problem in your network connection or at the WMS server.
Auto
-
@@ -30375,12 +30113,12 @@ This may be a problem in your network connection or at the WMS server.
Form1
-
Label Properties
-
Below Right
-
Below
-
Over
-
Above
-
Below Left
-
Above Right
-
Above Left
-
Use scale dependent rendering
-
Buffer labels
-
Buffer size
-
In points
-
In map units
-
Transparency
-
Offset
- Μετατόπιση
+
Basic label options
-
Field containing label
-
Default label
-
°
- °
+
Multiline labels?
-
Label only selected features
-
Advanced
-
Data defined placement
-
Data defined properties
-
&Font family
-
&Bold
-
&Italic
-
&Underline
-
&Size
-
Size units
-
Strikeout
-
Data defined buffer
-
X Offset (pts)
-
Y Offset (pts)
-
Expression result
-
Buffer color
-
@@ -30693,7 +30431,7 @@ This may be a problem in your network connection or at the WMS server.
Available typeface styles
-
Style
- Στυλ
+
Underlined text
-
U
-
Strikeout text
-
S
-
Bold text
(data defined only, overrides Style)
-
B
-
Italic text
(data defined only, overrides Style)
-
I
-
Ignores priority and permits collisions/overlaps
-
Always show (exceptions above)
-
Buffer
- Buffer
+
Position
- Θέση
+
Label distance
-
points
-
map units
- μονάδες χάρτη
+
mm
- χιλιοστά
+
% of length
-
%1 not found. Default substituted.
-
Chosen font
-
string
- αλφαριθμητικό
+
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
-
int [0-2000]
-
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
-
int [1-10000]
-
Text/Buffer sample
-
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
No change
-
All uppercase
-
All lowercase
-
Capitalize first letter
-
Size%1
-
X
-
File not found
-
@@ -30996,10 +30734,10 @@ This may be a problem in your network connection or at the WMS server.
Layer labeling settings
-
- Label this layer with
Χρήση ετικέτας για το επίπεδο
@@ -31079,30 +30817,30 @@ This may be a problem in your network connection or at the WMS server.
...
- ...
+
Lorem Ipsum
-
Reset sample text
-
Size for sample text in map units
-
Sample background color
-
Line direction symbol
-
Decimal places
-
Show plus sign
-
Multiple lines
-
- Automated placement settings (apply to all layers)
-
Text/Buffer Sample
-
Text
- Κείμενο
+
Formatting
-
Shadow
-
Rendering
-
letter
-
Spacing
- Διάκενο
+
Blend mode
-
word
-
Underlined text
-
Bold text
(data defined only, overrides Style)
-
B
-
Italic text
(data defined only, overrides Style)
-
I
-
Font is missing.
-
Text formatting
-
Wrap on character
-
Line height spacing for multi-line text
-
Alignment
Στοίχιση
Paragraph style alignment of multi-line text
-
Center
- Κέντρο
+
Force point inside polygon
-
Repeat
-
- Discourage labels from covering features
-
Available typeface styles
-
U
-
Strikeout text
-
S
-
Capitalization style of text
-
Space in pixels or map units, relative to size unit choice
-
Type case
-
Buffer
- Buffer
+
- Labels will not show if larger than this on screen
-
- px
-
- Data defined
-
- X
- Χ
+
- Y
- Υ
+
- Coordinate
-
- Preserve data rotation values
-
- horizontal
-
- vertical
-
- Label options
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
- Maximum
Μέγιστο
- Pixel size-based visibility (labels in map units)
-
- Labels will not show if smaller than this on screen
-
- Minimum
Ελάχιστο
@@ -31483,9 +31221,9 @@ This may be a problem in your network connection or at the WMS server.
<
- Scale-based visibility
-
Reverse direction
-
- Priority
Προτεραιότητα
- Low
Χαμηλή
- High
Υψηλή
@@ -31548,123 +31286,123 @@ This may be a problem in your network connection or at the WMS server.
Parallel
-
Curved
-
Text buffer
-
Draw text buffer
-
Color buffer's fill
-
Draw background
-
Size X
-
Size type
-
Size Y
-
Fill color
-
Border color
- Χρώμα περιγράμματος
+
Draw drop shadow
-
Blur radius
-
Blur only alpha pixels
-
Label's rotation is ignored
-
Use global shadow
-
˚
-
Lowest label component
-
Draw under
-
Horizontal
-
Offset from centroid
-
Around centroid
-
Horizontal (slow)
-
Free (slow)
-
Rotation
Περιστροφή
@@ -31706,12 +31444,12 @@ This may be a problem in your network connection or at the WMS server.
Line orientation dependent position
-
Centroid
-
abc
-
Quadrant
-
Distance
- Απόσταση
+
- outside
έξω από
- inside
μέσα σε
- Maximum angle between curved characters
-
Pen join style
-
Drop shadow
-
Offset
- Μετατόπιση
+
Scale
- Κλίμακα
+
Background
- Φόντο
+
Load symbol parameters
-
Fixed
-
Offset X,Y
- Μετατόπιση κατά Χ,Υ
+
Rectangle
- Ορθογώνιο
+
Square
- Τετράγωνο
+
Ellipse
- Έλλειψη
+
Circle
-
SVG
- SVG
+
Shape
- Σχήμα
+
Sync with label
-
Offset of label
-
Radius X,Y
-
Border width
- Πάχος περιγράμματος
+
symbol units
-
- Merge connected lines to avoid duplicate labels
-
- Label every part of multi-part features
-
- Feature options
-
- Suppress labeling of features smaller than
-
- mm
χιλιοστά
- Show all labels for this layer (including colliding labels)
-
- Show upside-down labels
-
- never
ποτέ
- when rotation defined
-
- always
πάντα
- Limit number of features to be labeled to
-
- Number of features sent to labeling engine, though not all may be labeled
-
Θέση
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
Εμφάνιση πάντα
- Show label
Εμφάνιση ετικέτας
@@ -31937,21 +31675,21 @@ This may be a problem in your network connection or at the WMS server.
Outline: %1
-
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -31959,60 +31697,60 @@ not displayed
&Add Group
-
&Remove
- Απομάκ&ρυνση
+
&Show in overview
-
Re&name
- Μετο&νομασία
+
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
QgsLegendModel
- Group
Ομάδα
- No Legend Available
-
@@ -32021,33 +31759,33 @@ not displayed
Millimeter
- Χιλιοστά
+
Map unit
- Μονάδες χάρτη
+
Angle
-
Distance
- Απόσταση
+
Line width
- Πάχος γραμμής
+
Color
- Χρώμα
+
@@ -32055,23 +31793,23 @@ not displayed
Styles related to the layer
-
Other styles on the database
-
Cancel
- Ακύρωση
+
Load Style
-
@@ -32104,12 +31842,12 @@ not displayed
Export/import error
-
You should select at least one connection from list.
-
The file is not an WMS connections exchange file.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an PostGIS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Connection with name '%1' already exists. Overwrite?
-
@@ -32232,26 +31970,26 @@ not displayed
Select connections to export
-
QgsMapCanvas
- canvas
-
- Rendering
-
- Canvas refresh: %1 ms
-
@@ -32277,12 +32015,12 @@ not displayed
X / East:
-
Y / North:
-
Specify CRS for layer %1
-
%1 at line %2 column %3
-
Error: qgis element could not be found in %1
-
Loading style file %1 failed because:
%2
-
Could not save symbology because:
%1
-
The directory containing your dataset needs to be writable!
-
Style not found in database
-
Created default style file as %1
-
ERROR: Failed to created default style file as %1. Check file permissions and retry.
-
User database could not be opened.
-
The style table could not be created.
-
The style %1 was saved to database
-
The style %1 was updated in the database.
-
The style %1 could not be updated in the database.
-
The style %1 could not be inserted into database.
-
ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
Unable to open file %1
-
@@ -32393,7 +32131,7 @@ not displayed
Transform error caught: %1
-
add feature
-
Wrong editing tool
-
Cannot apply the 'capture point' tool on this vector layer
-
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Cannot apply the 'capture line' tool on this vector layer
-
Cannot apply the 'capture polygon' tool on this vector layer
-
Cannot add feature. Unknown WKB type
-
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
@@ -32495,12 +32233,12 @@ not displayed
No feature selected. Please select a feature with the selection tool or in the attribute table
-
Several features are selected. Please select only one feature to which an part should be added.
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected feature is not multi part.
-
New part's geometry is not valid.
-
New polygon ring not disjoint with existing polygons.
-
Several features are selected. Please select only one feature to which an island should be added.
-
Selected geometry could not be found
-
@@ -32549,12 +32287,12 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32615,7 +32353,7 @@ not displayed
Changed properties for label
-
@@ -32623,12 +32361,12 @@ not displayed
Part of multipart feature deleted
-
Couldn't remove the selected part.
-
@@ -32636,18 +32374,18 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
Ring deleted
-
@@ -32655,12 +32393,12 @@ not displayed
No active vector layer
- Κανένα ενεργό διανυσματικό επίπεδο
+
Layer not editable
- Επίπεδο μη εγγράψιμο
+
@@ -32668,27 +32406,27 @@ not displayed
No active vector layer
- Κανένα ενεργό διανυσματικό επίπεδο
+
To run an action, you must choose a vector layer by clicking on its name in the legend
-
No actions available
-
The active vector layer has no defined actions
-
No features at this position found.
- Δε εντοπίστηκαν αντικείμενα στην τοποθεσία.
+
@@ -32696,52 +32434,52 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added and filled
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32749,28 +32487,28 @@ not displayed
All (%1)
-
No active layer. To identify features, you must choose an active layer.
-
Identifying on %1...
-
Identifying done.
-
(clicked coordinate)
-
new feature
-
firstX
attributes get sorted; translation for lastX should be lexically larger than this one
-
firstY
-
lastX
attributes get sorted; translation for firstX should be lexically smaller than this one
-
lastY
-
no data
-
Identify error
-
@@ -32857,7 +32595,7 @@ not displayed
Moved label
-
@@ -32865,12 +32603,12 @@ not displayed
could not snap to a segment on the current layer.
-
Inserted vertex
-
@@ -32878,12 +32616,12 @@ not displayed
Offset curve
-
Offset:
-
Creating offset geometry failed
-
@@ -32901,12 +32639,12 @@ not displayed
Pinned label
-
Unpinned label
-
@@ -32914,17 +32652,17 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Reshape
-
@@ -32932,7 +32670,7 @@ not displayed
Features Rotated
-
@@ -32940,7 +32678,7 @@ not displayed
Rotated label
-
@@ -32948,27 +32686,27 @@ not displayed
No point feature
-
No point feature was detected at the clicked position. Please click closer to the feature or enhance the search tolerance under Settings->Options->Digitizing->Serch radius for vertex edits
-
No rotation Attributes
-
The active point layer does not have a rotation attribute
-
Rotate symbol
-
@@ -32976,12 +32714,12 @@ not displayed
Hid labels
-
Showed labels
-
@@ -32989,23 +32727,23 @@ not displayed
Geometry simplified
-
Unsupported operation
-
Multipart features are not supported for simplification.
-
This feature cannot be simplified. Check if feature has enough vertices to be simplified.
-
@@ -33013,49 +32751,49 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Features split
-
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
No feature split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
@@ -33063,17 +32801,17 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Parts split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Split error
-
@@ -33117,7 +32855,7 @@ not displayed
Adjust scaling range
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
@@ -33142,39 +32880,39 @@ not displayed
Millimeter
- Χιλιοστά
+
Map unit
- Μονάδες χάρτη
+
Interval
-
Line offset
- Μετατόπιση γραμμής
+
Placement
- Τοποθέτηση
+
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -33182,7 +32920,7 @@ not displayed
Measure
- Μέτρηση
+
Segments
-
@@ -33210,57 +32948,57 @@ not displayed
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
@@ -33273,7 +33011,7 @@ not displayed
<p>This map is defined with a geographic coordinate system (latitude/longitude) but the map extents suggests that it is actually a projected coordinate system (e.g., Mercator). If so, the results from line or area measurements will be incorrect.</p><p>To fix this, explicitly set an appropriate map coordinate system using the <tt>Settings:Project Properties</tt> menu.
-
@@ -33281,58 +33019,58 @@ not displayed
Whole number (integer)
-
Decimal number (real)
-
Text (string)
-
Date
- Ημερομηνία
+
Whole number (smallint - 16bit)
-
Whole number (integer - 32bit)
- Ακέραιος αριθμός (32bit)
+
Whole number (integer - 64bit)
- Ακέραιος αριθμός (64bit)
+
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (double)
-
Text, unlimited length (text)
-
@@ -33340,7 +33078,7 @@ not displayed
Skip attribute
-
Concatenation
-
Skipped
-
@@ -33398,17 +33136,17 @@ not displayed
Merge feature attributes
-
Take attributes from selected feature
-
Remove feature from selection
-
@@ -33416,7 +33154,7 @@ not displayed
Remaining messages
-
%n more
unread messages
-
-
+
@@ -33448,13 +33183,13 @@ not displayed
No messages.
-
%1 message(s) logged.
-
Message
- Μήνυμα
+
Level
-
@@ -33495,7 +33230,7 @@ not displayed
Show non-spatial tables
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
-
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
-
Connection to %1 was successful
-
@@ -33697,52 +33432,52 @@ not displayed
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length (text)
-
Text, unlimited length unicode (ntext)
-
@@ -33750,7 +33485,7 @@ not displayed
New Connection...
- Νέα Σύνδεση...
+
@@ -33758,12 +33493,12 @@ not displayed
%1 as %2 in %3
-
as geometryless table
-
@@ -33771,128 +33506,128 @@ not displayed
Add MSSQL Table(s)
-
&Add
-
&Set Filter
- &Ορισμός Φίλτρου
+
Set Filter
- Ορισμός Φίλτρου
+
Wildcard
- Χαρακτήρας αναπλήρωσης
+
RegExp
-
All
- Όλα
+
Schema
-
Table
- Πίνακας
+
Type
- Τύπος
+
Geometry column
-
Primary key column
- Στήλη πρωτεύοντος κλειδιού
+
SRID
- Κωδικός Συστήματος Συν/νων
+
Sql
- Sql
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- Επιβεβαίωση Διαγραφής
+
Load connections
- Φόρτωση συνδέσεων
+
XML files (*.xml *XML)
- XML αρχεία (*.xml *XML)
+
Select Table
- Επιλογή πίνακα
+
You must select a table in order to add a layer.
- Πρέπει να γίνει επιλογή ενός πίνακα ώστε να γίνει προσθήκη επιπέδου.
+
MSSQL Provider
-
Stop
- Διακοπή
+
Connect
- Σύνδεση
+
@@ -33961,7 +33696,7 @@ not displayed
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
Form
-
Contrast
enhancement
-
Min/max
-
Red band
-
Green band
-
Blue band
-
@@ -34095,7 +33830,7 @@ enhancement
Network request %1 timed out
-
Cannot find boundary in multipart content type
-
@@ -34116,42 +33851,42 @@ enhancement
Create a new %1 connection
-
all
-
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
@@ -34180,17 +33915,17 @@ Note: giving the password is optional. It will be requested interactivly, when n
Create a new WMS connection
-
Connection details
- Λεπτομέρειες σύνδεσης
+
DPI-Mode
-
If the service requires basic authentication, enter a user name and optional password
-
&User name
-
HTTP address of the Web Map Server
-
Ignore GetFeatureInfo URI reported in capabilities
-
Ignore GetMap/GetTile URI reported in capabilities
-
Ignore axis orientation (WMS 1.3/WMTS)
-
Invert axis orientation
-
Smooth pixmap transform
-
Referer
-
@@ -34272,7 +34007,7 @@ Note: giving the password is optional. It will be requested interactivly, when n
Extended error information:
%1
-
Should the existing connection %1 be overwritten?
-
@@ -34295,12 +34030,12 @@ Extended error information:
Create a New OGR Database connection
-
Connection Information
- Πληροφορίες σύνδεσης
+
Text data
-
Whole number
-
Decimal number
-
Unable to open the database
-
Failed to load SRIDS: %1
-
Unable to open the database: %1
-
Error Creating SpatiaLite Table
-
Failed to create the SpatiaLite table %1. The database returned:
%2
-
Error Creating Geometry Column
-
Failed to create the geometry column. The database returned:
%1
-
Error Creating Spatial Index
-
Failed to create the spatial index. The database returned:
%1
-
%1 is an invalid layer and cannot be loaded.
- Το %1 είναι ένα μη έγκυρο επίπεδο και δεν μπορεί να φορτωθεί.
+
@@ -34482,7 +34217,7 @@ Extended error information:
...
- ...
+
Geometry column
-
geometry
-
Type
- Τύπος
+
Point
- Σημείο
+
Line
-
Polygon
- Πολύγωνο
+
MultiPoint
-
Multiline
- Πολυγραμμή
+
Multipolygon
- Πολυπολύγωνο
+
Spatial Reference Id
-
Specify the coordinate reference system of the layer's geometry.
-
Specify CRS
-
Add an integer id field as the primary key for the new layer
-
Create an autoincrementing primary key
-
New attribute
-
Name
- Όνομα
+
An attribute name
-
Add attribute to list
-
Add to attributes list
-
Attributes list
-
Delete selected attribute
-
Remove attribute
-
@@ -34615,48 +34350,48 @@ Extended error information:
Text data
-
Whole number
-
Decimal number
-
Date
- Ημερομηνία
+
ESRI Shapefile
-
Comma Separated Value
-
GML
-
Mapinfo File
- Αρχείο Mapinfo
+
Save layer as...
- Αποθήκευση επιπέδου ως...
+
@@ -34664,98 +34399,98 @@ Extended error information:
New Vector Layer
- Νέο Διανυσματικό Επίπεδο
+
File format
-
Type
- Τύπος
+
Point
- Σημείο
+
Line
-
Polygon
- Πολύγωνο
+
New attribute
-
Name
- Όνομα
+
Width
- Πλάτος
+
Precision
- Ακρίβεια
+
Add attribute to list
-
Add to attributes list
-
Attributes list
-
Delete selected attribute
-
Remove attribute
-
Specify the coordinate reference system of the layer's geometry.
-
Specify CRS
-
File encoding
-
@@ -34763,17 +34498,17 @@ Extended error information:
No query has been specified.
-
There is already a pending request for data.
-
Cannot open output file: %1
-
@@ -34781,47 +34516,47 @@ Extended error information:
Download OpenStreetMap data
-
Extent
- Έκταση
+
From map canvas
- Από τον καμβά του χάρτη
+
From layer
-
Manual
- Χειροκίνητα
+
Output file
- Αρχείο προορισμού
+
...
- ...
+
OpenStreetMap files (*.osm)
-
Download error
-
OpenStreetMap download
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -34864,95 +34599,95 @@ Extended error information:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
...
- ...
+
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Polygons (closed ways)
-
Output layer name
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
- Φόρτωση στον καμβά όταν τε&λειώσει
+
Tag
-
Count
- Απαρίθμηση
+
SQLite databases (*.db)
-
Unable to open database:
%1
-
OpenStreetMap export
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -34960,66 +34695,66 @@ Extended error information:
OpenStreetMap Import
-
Input XML file (.osm)
-
...
- ...
+
Output SpatiaLite DB file
-
Create connection (SpatiaLite) after import
-
Connection name
-
OpenStreetMap files (*.osm)
-
SQLite databases (*.db)
-
OpenStreetMap import
-
Output database file exists already. Overwrite?
-
Failed to import OSM data:
%1
-
Import has been successful.
-
@@ -35061,7 +34796,7 @@ Extended error information:
Add Layer(s) from a %1 Server
-
Prefer cache
-
Prefer network
-
Always network
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- Επιβεβαίωση Διαγραφής
+
Load connections
- Φόρτωση συνδέσεων
+
XML files (*.xml *XML)
- XML αρχεία (*.xml *XML)
+
Coordinate Reference System (%n available)
crs count
-
-
+
Coordinate Reference System
- Σύστημα Αναφοράς Συντεταγμένων
+
Could not understand the response:
%1
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
@@ -35215,17 +34947,17 @@ Extended error information:
Adds a few example WMS servers
-
Add default servers
-
ID
-
Format
-
Feature limit for GetFeatureInfo
-
Cache
- Cache
+
Layer Order
-
Move selected layer UP
-
Up
-
Move selected layer DOWN
-
Down
- Μετακίνηση κάτω
+
Layer
- Επίπεδο
+
Style
- Στυλ
+
Tilesets
-
Styles
-
Size
- Μέγεθος
+
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints
-
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Offline Editing Plugin
-
Could not open the spatialite logging database
-
@@ -35439,12 +35171,12 @@ Always network: always load from network and do not check if the cache has a val
Convert to offline project
-
Create offline copies of selected layers and save as offline project
-
&Offline Editing
-
Synchronize
-
Synchronize offline project with remote layers
-
Converting to offline project
-
Synchronizing to remote layers
-
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -35515,32 +35247,32 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
-
SpatiaLite DB
-
All files
- Όλα τα αρχεία
+
Offline Editing Plugin
-
Converting to offline project.
-
Offline database file '%1' exists. Overwrite?
-
@@ -35548,27 +35280,27 @@ Always network: always load from network and do not check if the cache has a val
Create offline project
-
Offline data
-
Browse...
- Περιήγηση...
+
Select remote layers
-
Show only editable layers
-
@@ -35576,7 +35308,7 @@ Always network: always load from network and do not check if the cache has a val
Layer %1 of %2..
-
@@ -35584,12 +35316,12 @@ Always network: always load from network and do not check if the cache has a val
Dialog
- Διάλογος
+
TextLabel
- Ετικέτα κειμένου
+
@@ -35597,18 +35329,18 @@ Always network: always load from network and do not check if the cache has a val
Couldn't open file %1.prj
-
OGR
- OGR
+
Couldn't open file %1.qpj
-
@@ -35616,7 +35348,7 @@ Always network: always load from network and do not check if the cache has a val
Data source is invalid, no layer found (%1)
-
OGR
- OGR
+
Data source is invalid (%1)
-
Whole number (integer)
-
Decimal number (real)
-
Text (string)
-
Date
- Ημερομηνία
+
Date & Time
-
OGR[%1] error %2: %3
-
Unknown
- Άγνωστο
+
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
type %1 for field %2 not found
-
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
Feature %1 for attribute update not found.
-
Field %1 of feature %2 doesn't exist.
-
Type %1 of attribute %2 of feature %3 unknown.
-
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
Shapefiles without attribute are considered read-only.
-
@@ -35791,12 +35523,12 @@ Always network: always load from network and do not check if the cache has a val
Open raster
-
Raster file:
-
Save raster as:
-
Choose a name of the raster
-
The selected file is not a valid raster file.
-
Choose a name for the modified raster
-
-modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -35843,7 +35575,7 @@ Always network: always load from network and do not check if the cache has a val
Open an OGR Supported Vector Layer
-
Add vector layer
-
No database selected.
-
No protocol URI entered.
-
No layers selected.
-
No directory selected.
-
@@ -35904,12 +35636,12 @@ Always network: always load from network and do not check if the cache has a val
Add vector layer
-
Source type
-
Database
- Βάση Δεδομένων
+
Protocol
-
Encoding
- Κωδικοποίηση
+
URI
-
Source
- Πηγή
+
Connections
- Συνδέσεις
+
Options Dialog Template
-
GroupBox
-
@@ -36004,78 +35736,78 @@ Always network: always load from network and do not check if the cache has a val
Identify highlight color
-
not present
-
System value: %1
-
Show all features
-
Show selected features
-
Always
-
If needed
-
Never
-
Load all
-
Check file contents
-
Check extension
-
No
- Όχι
+
Basic scan
-
Full scan
-
Cumulative pixel count cut
-
Mean +/- standard deviation
-
Select grid color
- Διαλέξτε το χρώμα του δικτύου
+
Solid
- Στερεό
+
Dots
-
Crosses
- Τέμνει
+
- Detected active locale on your system: %1
-
- To vertex
-
- To segment
-
- To vertex and segment
-
- map units
μονάδες χάρτη
- pixels
pixels
- Semi transparent circle
-
- Cross
Σταυρός
- None
Κανένα
- QGIS files
-
- Off
-
-
- QGIS
- QGIS
+
QGIS
+
+
+ GEOS
- GEOS
+
- Round
-
- Mitre
-
- Bevel
- Κορνίζα
+
- Save default project
-
- You must set a default project
-
- Current project saved as default
-
- Error saving current project as default
-
- Choose a directory to store project template files
-
Selection color
- Χρώμα επιλογής
+
Show features visible on map
-
- Choose project file to open at launch
-
- Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
-
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
-
- If Undefined
-
- Unset
-
- Prepend
-
- Append
-
- Choose a directory
-
- Enter scale
-
- Scale denominator
-
- Load scales
-
- XML files (*.xml *.XML)
- Αρχεία XML (*.xml *.XML)
+
- Save scales
-
- No Stretch
-
- Stretch To MinMax
-
- Stretch And Clip To MinMax
-
- Clip To MinMax
-
None / Planimetric
-
@@ -36355,7 +36087,7 @@ Always network: always load from network and do not check if the cache has a val
General
Γενικά
@@ -36363,38 +36095,38 @@ Always network: always load from network and do not check if the cache has a val
System
-
Data Sources
-
Data sources
-
Rendering
-
Canvas & Legend
-
Canvas and legend
-
Map Tools
-
Network
- Δίκτυο
+
Application
- Εφαρμογή
+
Style <i>(QGIS restart required)</i>
-
Font
- Γραμματοσειρά
+
Qt default
-
Timeout for timed messages or dialogs
-
s
-
Show tips at start up
-
Bold group box titles
-
QGIS-styled group boxes
-
New
-
Most recent
-
Specific
-
...
...
Open project on launch
-
Create new project from default project
-
Set current project as default
-
Reset default
-
Template folder
-
Browse
- Αναζήτηση
+
Reset
- Επαναφορά
+
Prompt to save project and data source changes when required
-
Prompt for confirmation when a layer is to be removed
-
Enable macros
-
Never
-
Ask
-
For this session only
-
Always (not recommended)
-
QSettings
-
Reset the User Interface settings, to reset QGIS to it's default view
-
Environment
-
Variable
-
Remove
Αφαίρεση
@@ -36662,34 +36394,34 @@ Always network: always load from network and do not check if the cache has a val
Add
Προσθήκη
Current environment variables (read-only - bold indicates modified at startup)
-
Show only QGIS-specific variables
-
Use custom variables (restart required - include separators)
-
Plugin paths
-
Path(s) to search for additional C++ plugins libraries
-
Feature attributes and table
-
Open attribute table in a dock window (QGIS restart required)
-
Copy geometry in WKT representation from attribute table
-
Attribute table behaviour
-
Attribute table row cache
-
Representation for NULL values
-
Data source handling
-
Scan for valid items in the browser dock
-
Scan for contents of compressed files (.zip) in browser dock
-
Prompt for raster sublayers when opening
-
Render layers in parallel using many CPU cores
-
Max cores to use:
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Rasters
-
RGB band selection
-
Red band
-
Green band
-
Blue band
-
Contrast enhancement
-
Single band gray
-
Multi band color (byte / band)
-
Multi band color (> byte / band)
-
Limits (minimum/maximum)
-
Cumulative pixel count cut limits
-
Standard deviation multiplier
-
Debugging
-
Show these events in the Log Message panel (under Rendering tab)
-
Map canvas refresh
-
Default map appearance (overridden by project properties)
-
Highlight color
-
<html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
Buffer
- Buffer
+
Lines / outlines buffer in millimeters.
-
Minimum width
-
Minimum line / outline width in millimeters.
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
-
-
- Suppress attribute form pop-up after feature creation
-
Use live-updating color chooser dialogs
-
Ignore shapefile encoding declaration
-
Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
Composer
- Συνθέτης
+
Custom side bar style
-
Add Oracle layers with double click and select in extended mode
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
Simplify on provider side if possible
-
Layer legend
-
Double click action in legend
-
Open layer properties
-
Open attribute table
-
Capitalise layer names
-
Bold layer names
-
Display classification attribute names
-
Bold group names
-
Create raster icons (may be slow)
-
Legend item styles
-
WMS getLegendGraphic Resolution
-
Nautical Miles
-
Map update interval
-
ms
-
Enable feature simplification by default for newly added layers
-
Decimal places
-
Keep base unit
-
Predefined scales
-
Add predefined scale
-
Remove selected
-
Insert default scales
-
Import from file
-
Export to file
- Εξαγωγή σε αρχείο
+
Composition defaults
-
Default font
-
Grid appearance
-
Grid style
-
Color...
- Χρώμα...
+
+
+ Grid defaults
+
+
+ Spacing
+
mm
-
Grid offset
-
x:
- x:
+
y:
- y:
+
Snap tolerance
-
- Guide defaults
+
+
+ Feature creation
-
- Validate geometries
-
- Reuse last entered attribute values
-
- Rubberband
λάστιχο
- Line color
Xρώμα γραμμής
- Line width in pixels
Πάχος γραμμής σε pixel
- Line width
Πάχος γραμμής
- Snapping
Αρπαγή
- Default snap mode
Προεπιλεγμένος τρόπος αρπαγής
- Default snapping tolerance
Προεπιλεγμένη ανοχή αρπαγής
- Search radius for vertex edits
Ακτίνα ευρεσης επεξεργασίας κορυφών
- map units
μονάδες χάρτη
pixels
pixels
- Open snapping options in a dock window (QGIS restart required)
-
- Vertex markers
Δείκτης κορυφών
- Marker style
Στύλ συμβόλου
- Marker size
Μέγεθός συμβόλου
- Show markers only for selected features
Εμφάνιση δεικτών μόνο για τα επιλεγμένα χαρακτηριστικά
-
- Curve offset tool
-
-
- Miter limit
-
-
- Join style
- Τύπος σύνδεσης
-
Curve offset tool
+
+
+ Miter limit
+
+
+ Join style
+
+
+ Quadrant segments
-
- GDAL driver options
-
- Edit Pyramids Options
-
-
- Edit Create Options
-
-
- GDAL drivers
-
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
-
Edit Create Options
+
+
+ GDAL drivers
+
+
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+
+
+ Name
Όνομα
- ext
-
- Flags
-
- Description
Περιγραφή
- CRS for new layers
-
- Select...
- Επιλογή...
+
- Use &project CRS
-
- Prompt for &CRS
-
- Use default CRS displa&yed below
-
- When a new layer is created, or when a layer is loaded that has no CRS
-
- Default CRS for new projects
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
- Always start new projects with this CRS
-
- Enable 'on the &fly' reprojection by default
-
- Don't enable 'on the fly' reprojection
-
- Default datum transformations
-
- Source CRS
- Σύστημα Αναφοράς Συντεταγμένων Προέλευσης
+
- Destination CRS
- Σύστημα Αναφοράς Συντεταγμένων Προορισμού
+
- Source datum transform
-
- Destination datum transform
-
- Ask for datum transformation when no default is defined
-
- Override system locale
Παράκαμψη γλώσσα συστήματος
- Locale to use instead
Γλώσσα που θα χρησιμοποιηθεί
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Παρατήρηση:</b> Η ενεργοποίηση / αλλαγή γλώσσας απαιτεί επανεκκίνηση του προγράμματος
- Additional Info
Περαιτέρω πληροφορίες
- Detected active locale on your system:
Ενεργή γλώσσα που εντοπίστηκε στο σύστημα σας:
- WMS search address
Διεύθυνση έυρεσης WMS
- Timeout for network requests (ms)
-
- Default expiration period for WMS-C/WMTS tiles (hours)
-
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
Max retry in case of tile request errors
+
+
+ User-Agent
+
+
+ Cache settings
Προσωρινή αποθήκευση επιλογών
- Directory
Φάκελος
- Size [KiB]
-
- Clear
Καθαρισμός
- Use proxy for web access
Ενεργοποίηση Proxy για σύνδεση στο διαδίκτυο
- Host
Host
- Port
Port
- User
Χρήστης
- Leave this blank if no proxy username / password are required
Αφήστε το κένο αν δεν απαιτείται proxy username / pass
- Password
Κωδικός πρόσβασης
- Proxy type
Tύπος Proxy
- Exclude URLs (starting with)
-
@@ -37627,7 +37362,7 @@ Always network: always load from network and do not check if the cache has a val
Missing objects
-
@@ -37648,7 +37383,7 @@ Missing some of the .ui template objects:
Scanning column %1.%2.%3...
-
Unable to get list of spatially enabled tables from the database
-
Unsupported geometry type %1 in %2.%3.%4 ignored
-
View %1.%2 doesn't have integer columns for use as keys.
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Should the existing connection %1 be overwritten?
-
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
Also list tables with no geometry
-
Use estimated table statistics for the layer metadata.
- Χρησιμοποίηση των εκτιμώμενων στατιστικών του πίνακα για τα μεταΔεδομένα του επιπέδου.
+
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Use estimated table metadata
- Χρησιμοποίηση του εκτιμώμενου πίνακα μεταΔεδομένων
+
@@ -38006,12 +37741,12 @@ error:%2
%1 as %2 in %3
-
as geometryless table
-
@@ -38032,52 +37767,52 @@ error:%2
Whole number
-
Whole big number
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
- Oracle
+
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
-
Primary key field %1 not found in %2
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
No key field for query given.
-
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -38521,7 +38256,7 @@ Error: %2
New Connection...
- Νέα Σύνδεση...
+
@@ -38583,7 +38318,7 @@ Error: %2
Wildcard
- Χαρακτήρας αναπλήρωσης
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- Επιβεβαίωση Διαγραφής
+
Load connections
- Φόρτωση συνδέσεων
+
XML files (*.xml *XML)
- XML αρχεία (*.xml *XML)
+
Select Table
- Επιλογή πίνακα
+
You must select a table in order to add a layer.
- Πρέπει να γίνει επιλογή ενός πίνακα ώστε να γίνει προσθήκη επιπέδου.
+
Stop
- Διακοπή
+
Connect
- Σύνδεση
+
@@ -38686,12 +38421,12 @@ Error: %2
Select...
- Επιλογή...
+
Enter...
- Εισαγωγή...
+
@@ -38768,7 +38503,7 @@ Error: %2
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -38776,61 +38511,61 @@ Error: %2
Edit...
- Επεξεργασία...
+
Delete
- Διαγραφή
+
Refresh
- Ανανέωση
+
Copying features...
- Αντιγραφή αντικειμένων...
+
Abort
- Ματαίωση
+
Import layer
- Εισαγωγή επιπέδου
+
%1: Not a vector layer!
-
%1: OK!
- %1: OK!
+
Import to PostGIS database
-
Failed to import some layers!
-
Import was successful.
- Η εισαγωγή ολοκληρώθηκε με επιτυχία.
+
@@ -38840,12 +38575,12 @@ Error: %2
Delete layer
- Διαγραφή επιπέδου
+
Layer deleted successfully.
- Το επίπεδο διαγράφηκε επιτυχώς.
+
@@ -38861,12 +38596,12 @@ Error: %2
%1 as %2 in %3
-
as geometryless table
-
@@ -39020,7 +38755,7 @@ Error: %2
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Connection failed - Check settings and try again.
- Η σύνδεση απέτυχε - Ελέγξτε τις ρυθμίσεις και ξαναδοκιμάστε
+
@@ -39117,18 +38852,18 @@ Error: %2
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
Only show layers in the layer registries
-
Don't resolve type of unrestricted columns (GEOMETRY)
-
@@ -39207,7 +38942,7 @@ Error: %2
Add PostGIS Table(s)
-
&Set Filter
- &Ορισμός Φίλτρου
+
Set Filter
- Ορισμός Φίλτρου
+
SRID
- Κωδικός Συστήματος Συν/νων
+
Stop
- Διακοπή
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Form
-
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- Πλάτος
+
Height
- Ύψος
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39457,12 +39192,12 @@ Error: %2
Select a picture
-
...
- ...
+
@@ -39485,19 +39220,19 @@ Error: %2
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
@@ -39505,27 +39240,27 @@ Error: %2
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
@@ -39533,7 +39268,7 @@ Error: %2
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
-
Plugin installation failed
@@ -39544,9 +39279,9 @@ Error: %2
Το πρόσθετο έχει εξαφανιστεί
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
-
Plugin installed successfully
@@ -39559,11 +39294,11 @@ Please search the list of installed plugins. I'm nearly sure you'll fi
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
@@ -39579,35 +39314,35 @@ You need to restart QGIS in order to reload it.
Are you sure you want to uninstall the following plugin?
-
Warning: this plugin isn't available in any accessible repository!
-
Plugin uninstalled successfully
-
Unable to add another repository with the same URL!
-
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
-
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
QGIS Official Plugin Repository
@@ -39767,7 +39502,7 @@ You need to restart QGIS in order to reload it.
The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below:
-
Name
- Όνομα
+
Parameters
- Παράμετροι
+
Plugins
- Πρόσθετα
+
sort by downloads
-
sort by vote
-
sort by status
-
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
-
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
Installable
category: plugins that are available for installation
-
This plugin is incompatible with this version of QGIS
-
Plugin designed for QGIS %1
compatible QGIS version(s)
-
This plugin requires a missing module
-
This plugin is broken
-
There is a new version available
-
This is a new plugin
-
Installed version of this plugin is higher than any version found in repository
-
This plugin is experimental
-
This plugin is deprecated
-
Category
- Κατηγορία
+
Tags
- Ετικέτες
+
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Only show plugins from selected repository
-
Clear filter
-
connected
- συνδέθηκε
+
The repository is connected
-
unavailable
-
The repository is enabled, but unavailable
-
disabled
-
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
@@ -40117,57 +39852,57 @@ You need to restart QGIS in order to reload it.
Plugin Manager
-
All
- Όλα
+
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
New
-
Not installed plugins seen for the first time
-
Invalid
- Μη έγκυρο
+
Broken and incompatible installed plugins
-
Search
- Αναζήτηση
+
Not installed
-
about:blank
- σχετικά: κενό
+
Upgrade all upgradeable plugins
-
Upgrade all
-
Uninstall the selected plugin
-
Uninstall plugin
-
Install, reinstall or upgrade the selected plugin
-
Reinstall plugin
- Επανεγκατάσταση προσθέτου
+
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
Check for updates on startup
-
every time QGIS starts
-
once a day
-
every 3 days
-
every week
-
every 2 weeks
-
every month
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
-
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Status
-
Name
- Όνομα
+
URL
- URL
+
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Add a new plugin repository
-
Add...
- Προσθήκη ...
+
Edit the selected repository
-
Edit...
- Επεξεργασία...
+
Remove the selected repository
-
Delete
- Διαγραφή
+
@@ -40373,19 +40108,19 @@ p, li { white-space: pre-wrap; }
None
- Κανένα
+
Label Font
-
The point displacement renderer only applies to (single) point layers.
'%1' is not a point layer and cannot be displayed by the point displacement renderer
-
@@ -40393,47 +40128,47 @@ p, li { white-space: pre-wrap; }
Form
-
Center symbol:
-
Renderer:
-
Renderer settings...
-
Displacement circles
-
Circle pen width:
-
Circle color:
-
Circle radius modification:
-
Point distance tolerance:
-
Label attribute:
-
Millimeter
- Χιλιοστά
+
Map unit
- Μονάδες χάρτη
+
undefined return value from encoding setting
-
Your database has no working PostGIS support.
-
Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net)
-
Database connection was successful, but the accessible tables could not be determined.
- Η σύνδεση με την βάση δεδομένων ήταν επιτυχής, αλλά δεν ήταν δυνατόν να προσδιοριστούν οι προσβάσιμοι πίνακες.
+
Database connection was successful, but the accessible tables could not be determined. The error message from the database was:
%1
-
Database connection was successful, but the accessible tables could not be determined.
The error message from the database was:
%1
-
Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry.
-
Unable to get list of spatially enabled tables from the database
-
Retrieval of postgis version failed
-
Could not parse postgis version string '%1'
-
Connection error: %1 returned %2 [%3]
-
Erroneous query: %1 returned %2 [%3]
-
Query failed: %1
Error: no result buffer
-
Query: %1 returned %2 [%3]
-
%1 cursor states lost.
SQL: %2
Result: %3 (%4)
-
resetting bad connection.
-
retry after reset succeeded.
-
retry after reset failed again.
-
connection still bad after reset.
-
bad connection, not retrying.
-
Geography
-
TopoGeometry
-
Query could not be canceled [%1]
-
PQgetCancel failed
-
@@ -40738,7 +40473,7 @@ Result: %3 (%4)
invalid PostgreSQL layer
-
invalid PostgreSQL topology layer
-
PostgreSQL layer has no primary key.
-
Whole number (smallint - 16bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, unlimited length (text)
-
PostgreSQL layer has unknown primary key type.
-
Read attempt on an invalid postgresql data source
-
FAILURE: Field %1 not found.
-
unexpected formatted field type '%1' for field %2
-
Field %1 ignored, because of unsupported type %2
-
Field %1 ignored, because of unsupported type type %2
-
PostgreSQL is still in recovery after a database crash
(or you are connected to a (read-only) slave).
Write accesses will be denied.
-
The custom query is not a select query.
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
Unexpected relation type '%1'.
-
No key field for query given.
-
Could not find topology of layer %1.%2.%3
-
PostGIS error while adding features: %1
-
PostGIS error while deleting features: %1
-
PostGIS error while adding attributes: %1
-
PostGIS error while deleting attributes: %1
-
PostGIS error while changing attributes: %1
-
PostGIS error while changing geometry values: %1
-
result of extents query invalid: %1
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
PostgreSQL version: unknown
-
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -41022,47 +40757,47 @@ PostGIS %2
Loading layer %1
-
Unable to open %1
-
Project File Read Error
-
%1 at line %2 column %3
-
Project file read error: %1 at line %2 column %3
-
%1 for file %2
-
Unable to save to file %1
-
%1 is not writable. Please adjust permissions (if possible) and try again.
-
Unable to save to file %1. Your project may be corrupted on disk. Try clearing some space on the volume and check file permissions before pressing save again.
-
@@ -41070,18 +40805,18 @@ PostGIS %2
Ignore
-
QGIS Project Read Error
-
Unable to open one or more project layers.
Choose ignore to continue loading without the missing layers. Choose cancel to return to your pre-project load state. Choose OK to try to find the missing layers.
-
@@ -41089,22 +40824,22 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select project file
-
QGIS files
-
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -41112,173 +40847,173 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select layers and groups to embed
-
Project file
-
...
- ...
+
QgsProjectProperties
- Layer
Επίπεδο
- Type
- Τύπος
+
- Identifiable
-
- Vector
-
- WMS
WMS
- Raster
-
- Coordinate System Restriction
-
- No coordinate systems selected. Disabling restriction.
-
- Selection color
- Χρώμα επιλογής
+
+
+ Measure tool (CRS transformation: %1)
+
Measure tool (CRS transformation: %1)
-
-
- Canvas units (CRS transformation: %1)
-
+ OFF
-
+ ON
-
- CRS %1 was already selected
-
+
+ Coordinate System Restrictions
+
Coordinate System Restrictions
-
-
- The current selection of coordinate systems will be lost.
Proceed?
-
- Select print composer
-
- Composer Title
-
- Select restricted layers and groups
-
+
+ Enter scale
+
Enter scale
- Scale denominator
+
- Scale denominator
- Load scales
+
Load scales
-
-
- XML files (*.xml *.XML)
- Αρχεία XML (*.xml *.XML)
-
-
XML files (*.xml *.XML)
+
+
+ Save scales
-
- Select a valid symbol
-
- Invalid symbol :
-
- Parameters:
- Παράμετροι:
+
+ Select %1 from pull-down menu to adjust radii
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
-
@@ -41286,99 +41021,98 @@ Proceed?
Project Properties
-
General
- Γενικά
+
General settings
-
Project title
-
Descriptive project name
-
Default project title
-
Selection color
- Χρώμα επιλογής
+
Background color
- Χρώμα φόντου
+
absolute
-
relative
-
Save paths
-
- Measure tool
- Εργαλείο μέτρησης
+
- Semi-minor
-
+
+ Semi-major
+
Semi-major
-
-
- Used when CRS transformation is turned off
-
- Canvas units
-
- Meters
- Μέτρα
+
- Feet
- Πόδια
+
CRS
-
Identify layers
-
Default styles
-
OWS server
-
- Ellipsoid
(for distance calculations)
-
- Degree
-
- Degree display
-
- Decimal degrees
-
- Degrees, Minutes
-
- Degrees, Minutes, Seconds
-
- Precision
- Ακρίβεια
+
- Automatically sets the number of decimal places in the mouse position display
-
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
-
-
- Automatic
- Αυτόματα
-
-
- Sets the number of decimal places to use for the mouse position display
-
-
- Manual
- Χειροκίνητα
-
-
- The number of decimal places for the manual option
-
Automatic
+
+
+ Sets the number of decimal places to use for the mouse position display
+
+
+ Manual
+
+
+ The number of decimal places for the manual option
+
+
+ decimal places
-
- Project scales
-
- ...
- ...
+
- Enable 'on the fly' CRS transformation
-
Identifiable layers
-
- Project layers
-
- Layer
- Επίπεδο
+
- Type
- Τύπος
+
- Identifiable
-
- Marker
-
- Line
-
- Default symbols
-
- Fill
- Γέμισμα
+
- Color Ramp
-
- Transparency
- Διαφάνεια
+
- %
- %
+
- Style Manager
-
- Options
- Επιλογές
+
Relations
-
- Project file
-
-
- Nautical miles
-
- Assign random colors to symbols
-
- Service capabilities
-
- Person
-
- Title
- Τίτλος
+
- Organization
-
- Online resource
-
- E-Mail
-
- Phone
-
- Abstract
- Σύνοψη
+
- Fees
-
- Access constraints
-
- Keyword list
-
- WMS capabilities
-
- Add geometry to feature response
-
- Min. X
-
- Min. Y
-
- Max. X
-
- Max. Y
-
- Use Current Canvas Extent
-
- Used
-
- Exclude composers
-
- WFS capabilities
-
- WCS capabilities
-
- Exclude layers
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
- Published
-
- Update
- Ενημέρωση
+
- Insert
-
- Delete
- Διαγραφή
+
- Unselect all
-
- Select all
- Επιλογή όλων
+
Macros
-
- Advertised URL
-
- Width
- Πλάτος
+
- Height
- Ύψος
+
- Maximums for GetMap request
Μέγιστο για αιτήματα GetMap
- Advertised extent
-
- CRS restrictions
-
- Python macros
-
@@ -41791,29 +41520,29 @@ Proceed?
User Defined Coordinate Systems
-
Geographic Coordinate Systems
-
Projected Coordinate Systems
-
Resource Location Error
-
Error reading database file from:
%1
Because of this the projection selector will not work...
-
@@ -41821,50 +41550,50 @@ Because of this the projection selector will not work...
Coordinate Reference System Selector
- Επιλογέας Συστηματος Αναφοράς Συντεταγμένων
+
Filter
- Φίλτρο
+
Recently used coordinate reference systems
-
Coordinate Reference System
- Σύστημα Αναφοράς Συντεταγμένων
+
Selected CRS:
-
Authority ID
-
ID
-
Coordinate reference systems of the world
-
Hide deprecated CRSs
-
@@ -41872,45 +41601,42 @@ Because of this the projection selector will not work...
&Test
- &Δοκιμή
+
&Clear
- &Καθαρισμός
+
Set provider filter on %1
-
Query Result
-
The where clause returned %n row(s).
returned test rows
-
-
+
Query Failed
-
An error occurred when executing the query.
-
The data provider said:
%1
-
Error in Query
-
The subset string could not be set
-
@@ -41936,149 +41662,149 @@ The data provider said:
Query Builder
-
Datasource
-
Fields
- Πεδία
+
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
-
Values
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
-
Sample
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
-
All
- Όλα
+
Use unfiltered layer
-
Operators
- Τελεστές
+
=
- =
+
<
- <
+
NOT
-
OR
- OR
+
AND
- AND
+
%
- %
+
IN
-
NOT IN
-
!=
-
>
- >
+
LIKE
-
ILIKE
-
>=
- >=
+
<=
- <=
+
Provider specific filter expression
-
@@ -42087,29 +41813,29 @@ p, li { white-space: pre-wrap; }
Editable
-
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42117,17 +41843,17 @@ p, li { white-space: pre-wrap; }
Form
-
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Minimum
- Ελάχιστο
+
Local minimum/maximum = 0/0
-
@@ -42150,7 +41876,7 @@ p, li { white-space: pre-wrap; }
Enter result file
-
Raster calculator
-
Raster bands
-
Result layer
-
X min
- X min
+
XMax
-
Y min
- Y min
+
Y max
- Y max
+
Columns
- Στήλες
+
Output format
-
Add result to project
-
Cannot get create options for driver %1
-
For details on pyramids options please see the following pages
-
No help available
-
cannot validate pyramid options
-
Cannot validate creation options
-
Valid
- Έγκυρο
+
pyramid creation option
-
creation option
-
Visibility
-
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Show all bands
-
Show RGB/Gray band(s)
-
Show selected band
-
Display
- Εμφάνιση
+
Draw as lines
-
Draw as lines (only int layers)
-
Actions
- Ενέργειες
+
Load min/max
-
Estimate (faster)
-
Actual (slower)
-
Current extent
- Τρέχουσα έκταση χάρτη
+
Use stddev (1.0)
-
Use stddev (custom)
-
Load for each band
-
Recompute Histogram
-
Band %1
-
Choose a file name to save the map image as
-
@@ -42663,58 +42389,58 @@ Click on help button to get valid creation options for this format.
Form
-
Set min/max style for
-
Min
-
Pick Min value on graph
-
...
- ...
+
Max
-
Pick Max value on graph
-
Prefs/Actions
-
Save plot
-
Save as image...
-
Compute Histogram
-
@@ -42722,7 +42448,7 @@ Click on help button to get valid creation options for this format.
Identify
- Ταυτοποίηση
+
Create Datasources
-
Remove Datasources
-
Band
- Κανάλι
+
@@ -42752,192 +42478,192 @@ Click on help button to get valid creation options for this format.
Not Set
-
QgsRasterLayer created
-
Raster
-
No Data Value
-
NoDataValue not set
-
Could not determine raster data type.
-
Driver
- Driver
+
Data Type
- Τύπος Δεδομενων
+
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Band
- Κανάλι
+
Band No
-
No Stats
-
No stats collected yet
-
Min Val
-
Max Val
-
Range
- Εύρος
+
Mean
- Μέσος
+
Sum of squares
-
Standard Deviation
- Τυπική Απόκλιση
+
Sum of all cells
-
Cell Count
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
<maplayer> not found.
-
@@ -42945,89 +42671,89 @@ Click on help button to get valid creation options for this format.
Not Set
-
Description
- Περιγραφή
+
Large resolution raster layers can slow navigation in QGIS.
-
By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom.
-
You must have write access in the directory where the original data is stored to build pyramids.
-
Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
-
Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
-
Layer Properties - %1
-
Nearest neighbour
- Πλησιέστερου Γείτονα
+
Bilinear
- Διγραμμικός (Bilinear)
+
Cubic
- Κυβικός
+
Average
-
None
- Κανένα
+
Red
- Κόκκινο
+
Green
- Πράσινο
+
Blue
- Μπλε
+
Percent Transparent
-
Gray
- Γκρί
+
Indexed Value
-
From
- Από
+
To
- Σε
+
not defined
-
Columns: %1
-
Rows: %1
-
Columns:
-
n/a
-
Rows:
-
No-Data Value:
-
No-Data Value: %1
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Save file
-
Textfile
-
QGIS Generated Transparent Pixel Value Export File
-
Value
- Τιμή
+
Write access denied. Adjust the file permissions and try again.
-
Open file
- Άνοιγμα αρχείου
+
Import Error
-
The following lines contained errors
%1
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Default Style
-
Load layer properties from style file
-
QGIS Layer Style File
-
Saved Style
-
Save layer properties as style file
-
@@ -43227,304 +42953,304 @@ Click on help button to get valid creation options for this format.
Raster Layer Properties
-
Save Style ...
- Αποθήκευση Στυλ...
+
Load Style ...
-
Resolutions
-
Save As Default
-
Restore Default Style
-
Render type
-
Resampling
-
Oversampling
-
Transparency
- Διαφάνεια
+
Style
- Στυλ
+
Layer info
- Πληροφορίες επιπέδου
+
Description
- Περιγραφή
+
Keyword list
-
Format
-
Attribution
-
Url
- Url
+
MetadataUrl
-
Type
- Τύπος
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
- Ιδιότητες
+
Band rendering
-
Color rendering
-
Saturation
-
Off
-
By lightness
-
By luminosity
-
By average
-
Hue
-
Blending mode
-
Brightness
-
Contrast
-
Grayscale
-
Colorize
-
Strength
-
%
- %
+
Reset all color rendering options to default
-
Reset
- Επαναφορά
+
Zoomed: in
-
out
-
Global transparency
-
None
- Κανένα
+
00%
-
<p align="right">Full</p>
-
No data value
-
Use original source no data value.
-
No data value:
-
Original data source no data value, if exists.
-
<src no data value>
-
Additional user defined no data value.
-
Additional no data value
-
Custom transparency options
-
Transparency band
-
Add values from display
-
Transparent pixel list
-
Add values manually
-
...
- ...
+
Remove selected row
-
Default values
-
Import from file
-
Export to file
- Εξαγωγή σε αρχείο
+
General
- Γενικά
+
Layer name
- Όνομα επιπέδου
+
displayed as
- εμφάνιση ως
+
Layer source
- Προέλευση δεδομένων
+
Scale dependent visibility
-
Coordinate reference system
-
Specify the coordinate reference system of the layer's geometry.
-
Specify...
-
Thumbnail
-
Legend
- Υπόμνημα
+
Palette
- Παλέττα
+
Metadata
- Μεταδεδομένα
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Title
- Τίτλος
+
Abstract
- Σύνοψη
+
Pyramids
-
Overview format
-
External
-
Internal (if possible)
-
External (Erdas Imagine)
-
The directory %1 contains files which will be overwritten: %2
-
Save raster layer as...
-
Output mode
-
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Format
-
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
Create VRT
-
Browse...
- Περιήγηση...
+
Resolution
- Ανάλυση
+
VRT Tiles
-
Maximum number of columns in one tile.
-
Max columns
-
Maximum number of rows in one tile.
-
Max rows
-
Pyramids
-
Resolutions
-
Pyramid resolutions corresponding to levels given
-
Use existing
-
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
- Χωρίς τιμές δεδομέ&νων
+
Add values manually
-
Load user defined fully transparent (100%) values
-
Remove selected row
-
Clear all
-
@@ -43979,12 +43705,12 @@ datasets with maximum width and height specified below.
No option selected
-
Please select an option to load min/max values.
-
@@ -43992,74 +43718,74 @@ datasets with maximum width and height specified below.
Form
-
Load min/max values
-
-
-
%
- %
+
Min / max
-
Extent
- Έκταση
+
Full
-
Current
-
Accuracy
-
Actual (slower)
-
Estimate (faster)
-
Cumulative
count cut
-
Mean +/-
standard deviation ×
-
Load
-
@@ -44067,62 +43793,62 @@ standard deviation ×
Form
-
Insert positive integer values separated by spaces
-
External (GTiff .ovr)
-
Internal (if possible)
-
External (Erdas Imagine .aux)
-
Levels
-
Create Options
- Επιλογές δημιουργίας
+
Resampling method
- Μέθοδος Επαναδειγματοληψίας
+
Average
-
Nearest Neighbour
- Εγγύτερος γειίτονας
+
Custom levels
-
Overview format
-
@@ -44130,53 +43856,53 @@ standard deviation ×
Unknown
- Άγνωστο
+
User defined
-
Estimated
-
Exact
-
min / max
-
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
-
@@ -44184,63 +43910,63 @@ standard deviation ×
Export Frequency distribution as csv
-
Export Colors and elevations as xml
-
Import Colors and elevations from xml
-
Error opening file
-
The relief color file could not be opened
-
Error parsing xml
-
The xml file could not be loaded
-
Enter result file
-
Enter lower elevation class bound
-
Elevation
-
Enter upper elevation class bound
-
Select color for relief class
-
@@ -44253,7 +43979,7 @@ standard deviation ×
Elevation layer
-
Z factor
-
Add result to project
-
Illumination
-
Azimuth (horizontal angle)
-
Vertical angle
-
Relief colors
-
Create automatically
-
Export distribution...
-
Up
-
Down
- Μετακίνηση κάτω
+
Lower bound
-
Upper bound
-
Export colors...
-
Import colors...
-
@@ -44361,41 +44087,41 @@ standard deviation ×
Terrain analysis
-
Slope
-
Aspect
- Όψη
+
Hillshade
- Λοφοσκιά
+
Relief
-
Ruggedness index
-
Calculating hillshade...
-
Calculating relief...
-
Calculating slope...
-
Calculating aspect...
-
Ruggedness
-
Calculating ruggedness...
-
@@ -44437,7 +44163,7 @@ standard deviation ×
Preview Expression
-
@@ -44445,32 +44171,32 @@ standard deviation ×
Dialog
- Διάλογος
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -44478,19 +44204,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -44498,7 +44224,7 @@ standard deviation ×
[Generated automatically]
-
@@ -44506,27 +44232,27 @@ standard deviation ×
Add relation
-
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Form
-
Toggle editing
-
Link
-
Unlink
-
Form View
-
Table View
-
@@ -44598,22 +44324,22 @@ standard deviation ×
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Add Relation
-
Remove Relation
-
@@ -44646,7 +44372,7 @@ standard deviation ×
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -44654,7 +44380,7 @@ standard deviation ×
Rule properties
-
Filter expression parsing error:
-
Evaluation error
-
Filter returned %n feature(s)
number of filtered features
-
-
+
@@ -44723,24 +44446,24 @@ standard deviation ×
Rotation field
-
Size scale field
-
Scale area
-
Scale diameter
-
- expression -
-
- no field -
-
@@ -44767,32 +44490,32 @@ standard deviation ×
Renderer settings
-
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
This renderer doesn't implement a graphical interface.
-
@@ -44800,88 +44523,88 @@ standard deviation ×
Copy
- Αντιγραφή
+
Paste
- Επικόλληση
+
Change color
-
Change transparency
-
Change output unit
-
Change width
-
Change size
-
Transparency
- Διαφάνεια
+
Change symbol transparency [%]
-
Symbol unit
-
Select symbol unit
-
Millimeter
- Χιλιοστά
+
Map unit
- Μονάδες χάρτη
+
Width
- Πλάτος
+
Change symbol width
-
Size
- Μέγεθος
+
Change symbol size
-
@@ -44889,52 +44612,52 @@ standard deviation ×
(no filter)
-
<li><nobr>%1 features also in rule %2</nobr></li>
-
Label
- Ετικέτα
+
Rule
- Κανόνας
+
Min. scale
-
Count
- Απαρίθμηση
+
Duplicate count
-
Max. scale
-
Number of features in this rule.
-
Number of features in this rule which are also present in other rule(s).
-
@@ -44977,12 +44700,12 @@ standard deviation ×
Refine current rule
-
Add scales to rule
-
Refine a rule to categories
-
Refine a rule to ranges
-
Scale refinement
-
Parent rule %1 must have a symbol for this operation.
-
Please enter scale denominators at which will split the rule, separate them by commas (e.g. 1000,5000):
-
"%1" is not valid scale denominator, ignoring it.
-
Millimeter
- Χιλιοστά
+
Map unit
- Μονάδες χάρτη
+
Select SVG texture file
-
All files
- Όλα τα αρχεία
+
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45320,12 +45043,12 @@ standard deviation ×
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -45351,7 +45074,7 @@ standard deviation ×
Scale visibility
-
@@ -45359,7 +45082,7 @@ standard deviation ×
Search query builder
-
Found %n matching feature(s).
test result
-
-
+
Evaluation error
-
The query you specified results in zero records being returned.
-
Could not open file for writing
-
Load query from file
-
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
Select attribute
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -45495,46 +45215,43 @@ standard deviation ×
Validation started.
- Επικύρωση ξεκίνησε.
+
Validation finished (%n error(s) found).
number of geometry errors
-
-
+
ring %1, vertex %2
-
polygon %1, ring %2, vertex %3
-
polyline %1, vertex %2
-
vertex %1
-
point %1
-
single point
-
@@ -45542,7 +45259,7 @@ standard deviation ×
Scanning
-
The database gave an error while executing this SQL:
-
... (rest of SQL trimmed)
is appended to a truncated SQL statement
-
The error was:
%1
-
@@ -45591,27 +45308,27 @@ The error was:
Color (start)
-
Color (end)
-
Blur radius
-
Integer between 0 and 18
-
Use whole shape
-
Ignore rings
-
@@ -45636,22 +45353,22 @@ The error was:
Map unit
- Μονάδες χάρτη
+
Color
- Χρώμα
+
Border color
- Χρώμα περιγράμματος
+
Border width
- Πάχος περιγράμματος
+
@@ -45661,7 +45378,7 @@ The error was:
Millimeter
- Χιλιοστά
+
Color
- Χρώμα
+
Pen width
- Χρώμα
+
Offset
- Μετατόπιση
+
Dash pattern
-
Join style
- Τύπος σύνδεσης
+
Cap style
-
@@ -45720,42 +45437,42 @@ The error was:
Name
- Όνομα
+
Fill color
-
Border color
- Χρώμα περιγράμματος
+
Outline width
- Πλάτος περιγράμματος
+
Angle
-
Offset
- Μετατόπιση
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -45763,32 +45480,32 @@ The error was:
Black to white
-
White to black
-
No enhancement
- Χωρίς ενίσχυση
+
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
@@ -45796,33 +45513,33 @@ The error was:
Form
-
Contrast
enhancement
-
Gray band
-
Min
-
Max
-
Color gradient
-
@@ -45834,7 +45551,7 @@ enhancement
Discrete
-
Linear
- Γραμμικός
+
Exact
-
Continuous
-
Equal interval
-
Custom color map entry
-
Load Color Map
-
The color map for band %1 has no entries
-
Open file
- Άνοιγμα αρχείου
+
Textfile (*.txt)
-
Import Error
-
The following lines contained errors
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Save file
-
QGIS Generated Color Map Export File
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
@@ -45941,22 +45658,22 @@ enhancement
Form
-
Band
- Κανάλι
+
Color interpolation
-
Add values manually
-
Remove selected row
-
Sort colormap items
-
Load color map from band
-
Load color map from file
-
Export color map to file
-
Generate new color map
-
Mode
-
Invert
-
Min / max origin:
-
Min / Max origin
-
@@ -46064,7 +45781,7 @@ enhancement
Symbol levels...
-
@@ -46072,32 +45789,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -46105,7 +45822,7 @@ enhancement
Form
-
ALL the constraints
-
any ONE of the constraints
-
Invalid name
-
The smart group name field is empty. Kindly provide a name
-
@@ -46141,17 +45858,17 @@ enhancement
Smart Group Editor
-
Smart Group Name
-
Condition matches
-
Snapping and Digitizing Options
-
to vertex
-
to segment
-
to vertex and segment
-
Snapping options
-
Avoid Int.
-
Avoid intersections of new polygons
-
Enable topological editing
-
Enable snapping on intersection
-
@@ -46252,70 +45969,70 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
unknown error cause
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
UNKNOWN
-
GEOMETRY
-
POINT
-
LINESTRING
-
POLYGON
-
MULTIPOINT
-
MULTILINESTRING
-
MULTIPOLYGON
-
GEOMETRYCOLLECTION
-
@@ -46323,27 +46040,27 @@ enhancement
Binary object (BLOB)
-
Text
- Κείμενο
+
Decimal number (double)
-
Whole number (integer)
-
Retrieval of spatialite version failed
-
SpatiaLite
- SpatiaLite
+
Could not parse spatialite version string '%1'
-
SQLite error: %2
SQL: %1
-
unknown cause
-
FAILURE: Field %1 not found.
-
@@ -46430,69 +46147,69 @@ SQL: %1
Add SpatiaLite Table(s)
-
Databases
- Βάσεις Δεδομένων
+
&Update statistics
-
&Add
-
&Set Filter
- &Ορισμός Φίλτρου
+
Wildcard
- Χαρακτήρας αναπλήρωσης
+
RegExp
-
All
- Όλα
+
Table
- Πίνακας
+
Type
- Τύπος
+
Geometry column
-
Sql
- Sql
+
Confirm Update Statistics
-
Update Statistics
-
Internal statistics successfully updated for: %1
-
Error while updating internal statistics for: %1
-
@
- @
+
Choose a SpatiaLite/SQLite DB to open
-
SpatiaLite DB
-
All files
- Όλα τα αρχεία
+
Error
- Σφάλμα
+
Cannot add connection '%1' : a connection with the same name already exists.
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Select Table
- Επιλογή πίνακα
+
You must select a table in order to add a Layer.
-
SpatiaLite DB Open Error
-
Database does not exist: %1
-
Failure while connecting to: %1
%2
-
SpatiaLite getTableInfo Error
-
Failure exploring tables from: %1
%2
-
SpatiaLite Error
-
Unexpected error when working with: %1
%2
-
@@ -46621,52 +46338,52 @@ but implies better performance thereafter.
Table
- Πίνακας
+
Type
- Τύπος
+
Geometry column
-
Sql
- Sql
+
Point
- Σημείο
+
Multipoint
- Πολυσημείο
+
Line
-
Multiline
- Πολυγραμμή
+
Polygon
- Πολύγωνο
+
Multipolygon
- Πολυπολύγωνο
+
@@ -46674,138 +46391,135 @@ but implies better performance thereafter.
The spatial query requires at least two vector layers
-
%n selected geometries
selected geometries
-
-
+
Selected geometries
-
%1)Query
-
Begin at %L1
-
< %1 >
-
Total of features = %1
-
Total of invalid features:
-
Finish at %L1 (processing time %L2 minutes)
-
Using the field "%1" for subset
-
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
%1 of %2
-
all = %1
-
%1 of %2(selected features)
-
Create new selection
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
user
- χρήστης
+
Map "%1" "on the fly" transformation.
-
enable
-
disable
- απενεργοποίηση
+
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Zoom to feature
-
Missing reference layer
-
Select reference layer!
-
Missing target layer
-
Select target layer!
-
Create new layer from items
-
The query from "%1" using "%2" in field not possible.
-
Create new layer from selected
-
%1 of %2 identified
-
@@ -46867,127 +46581,127 @@ CRS of map is %1.
Spatial Query
-
Layer on which the topological operation will select geometries
-
Select source features from
-
Select the target layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
-
Selected feature(s) only
-
Where the feature
-
Select the topological operation
-
Layer whose geometries will be used as reference by the topological operation
-
Reference features of
-
Select the reference layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
-
And use the result to
-
Selected features
-
Number of selected features in map
-
Create layer with selected
-
Result feature ID's
-
Select one FID to identify geometry of feature
-
Create layer with list of items
-
Zoom to item
-
Check to show log processing of query
-
Log messages
-
Run query or close the window
-
@@ -46997,17 +46711,17 @@ p, li { white-space: pre-wrap; }
&Spatial Query
-
Query not executed
-
DEBUG
-
@@ -47015,38 +46729,38 @@ p, li { white-space: pre-wrap; }
Select a Spatialite Spatial Reference System
-
SRID
- Κωδικός Συστήματος Συν/νων
+
Authority
-
Reference Name
-
Search
- Αναζήτηση
+
Filter
- Φίλτρο
+
Name
- Όνομα
+
@@ -47054,32 +46768,32 @@ p, li { white-space: pre-wrap; }
File Name
-
Feature Class
-
Features
- Χαρακτηριστικά
+
DB Relation Name
-
Schema
-
Are you sure you want to remove the [%1] connection and all associated settings?
-
Add Shapefiles
-
Shapefiles
- Αρχεία τύπου Shapefile
+
All files
- Όλα τα αρχεία
+
The following Shapefile(s) could not be loaded:
-
REASON: File cannot be opened
-
REASON: One or both of the Shapefile files (*.dbf, *.shx) missing
-
General Interface Help:
-
PostgreSQL Connections:
-
[New ...] - create a new connection
-
[Edit ...] - edit the currently selected connection
-
[Remove] - remove the currently selected connection
-
-you need to select a connection that works (connects properly) in order to import files
-
-when changing connections Global Schema also changes accordingly
-
Shapefile List:
-
[Add ...] - open a File dialog and browse to the desired file(s) to import
-
[Remove] - remove the currently selected file(s) from the list
-
[Remove All] - remove all the files in the list
-
[SRID] - Reference ID for the shapefiles to be imported
-
[Use Default (SRID)] - set SRID to -1
-
[Geometry Column Name] - name of the geometry column in the database
-
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
-
[Global Schema] - set the schema for all files to be imported into
-
[Import] - import the current shapefiles in the list
-
[Quit] - quit the program
-
[Help] - display this help dialog
-
Import Shapefiles
-
You need to specify a Connection first
-
Password for %1
-
Please enter your password:
- Παρακαλώ δώστε τον κωδικό σας:
+
Connection failed - Check settings and try again
-
PostGIS not available
-
<p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
-
You need to add shapefiles to the list first
-
Importing files
-
Cancel
- Ακύρωση
+
Progress
-
Problem inserting features from file:
-
%1
Invalid table name.
-
%1
No fields detected.
-
%1
The following fields are duplicates:
%2
-
Importing files
%1
-
%1
<p>Error while executing the SQL:</p><p>%2</p><p>The database said:%3</p>
-
Import Shapefiles - Relation Exists
-
%1 of %2 shapefiles could not be imported.
-
@@ -47359,132 +47073,132 @@ Do you want to overwrite the [%2] relation?
SPIT - Shapefile to PostGIS Import Tool
-
PostgreSQL connections
-
Connect to PostGIS
-
Connect
- Σύνδεση
+
Create a new PostGIS connection
-
New
-
Edit the current PostGIS connection
-
Edit
- Επεξεργασία
+
Remove the current PostGIS connection
-
Remove
- Αφαίρεση
+
Import options and shapefile list
-
Geometry column name
-
Set the geometry column name to the default value
-
Use default geometry column name
-
SRID
- Κωδικός Συστήματος Συν/νων
+
Set the SRID to the default value
-
Use default SRID
-
Primary key column name
-
Global schema
-
Add a shapefile to the list of files to be imported
-
Add
- Προσθήκη
+
Remove the selected shapefile from the import list
-
Remove all the shapefiles from the import list
-
Remove All
-
@@ -47492,18 +47206,18 @@ Do you want to overwrite the [%2] relation?
&Import Shapefiles to PostgreSQL
-
Import shapefiles into a PostGIS-enabled PostgreSQL database. The schema and field names can be customized on import
-
&Spit
-
@@ -47511,20 +47225,20 @@ Do you want to overwrite the [%2] relation?
QGIS Sponsors
- Χορηγοί του QGIS
+
TextLabel
- Ετικέτα κειμένου
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47538,7 +47252,155 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
+
+
+ QgsSqlAnywhereProvider
+
+ Failed to load interface
+
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
@@ -47546,163 +47408,163 @@ p, li { white-space: pre-wrap; }
Select all
- Επιλογή όλων
+
Clear selection
- Εκκαθάριση επιλογής
+
Import style(s)
-
file specified below
-
URL specified below
-
Select symbols to import
-
Import
- Εισαγωγή
+
Export style(s)
-
Export
- Εξαγωγή
+
Export/import error
-
You should select at least one symbol/color ramp.
-
Save styles
-
XML files (*.xml *.XML)
- Αρχεία XML (*.xml *.XML)
+
Error when saving selected symbols to file:
%1
-
Import error
-
An error occured during import:
%1
-
Group Name
-
Please enter a name for new group:
-
imported
-
New Group
-
New group cannot be created without a name. Kindly enter a name.
-
New group
-
Cannot create a group without name. Enter a name.
-
Duplicate names
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
-
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
-
Load styles
-
XML files (*.xml *XML)
- XML αρχεία (*.xml *XML)
+
Downloading style ...
-
HTTP Error!
-
Download failed: %1.
-
@@ -47710,27 +47572,27 @@ Overwrite?
Styles import/export
-
Import from
-
Location
-
Save to group
-
Select symbols to export
-
@@ -47738,187 +47600,187 @@ Overwrite?
Type here to filter symbols...
-
Share Menu
-
Export
- Εξαγωγή
+
Import
- Εισαγωγή
+
Group Actions
-
Group Symbols
-
Edit Smart Group
-
Marker symbol (%1)
-
Line symbol (%1)
-
Fill symbol (%1)
-
Color ramp (%1)
-
Gradient
-
Random
-
ColorBrewer
-
cpt-city
-
new symbol
-
new marker
-
new line
-
new fill symbol
-
Symbol Name
- Όνομα Συμβόλου
+
Please enter a name for new symbol:
-
Save symbol
- Αποθήκευση συμβόλου
+
Cannot save symbol without name. Enter a name.
-
Symbol with name '%1' already exists. Overwrite?
-
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Color Ramp Name
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Cannot save color ramp without name. Enter a name.
-
Save color ramp
-
Color ramp with name '%1' already exists. Overwrite?
-
Ungrouped
-
Smart Groups
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
-
Invalid selection
-
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
Error!
- Σφάλμα!
+
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
Database Error
- Σφάλμα Βάσης Δεδομενων
+
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Add Group
-
Remove Group
-
Apply Group
-
Un-group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
@@ -48056,17 +47918,17 @@ There was a problem with your symbol database.
Style Manager
-
Marker
-
Line
-
Color ramp
- Κλίμακα χρώματος
+
SVG annotation
-
SVG request failed [error: %1 - url: %2]
-
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -48226,17 +48088,17 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48246,7 +48108,7 @@ There was a problem with your symbol database.
Millimeter
- Χιλιοστά
+
Select SVG file
- Επιλογή αρχείου SVG
+
SVG files
- Αρχεία SVG
+
Border width
- Πάχος περιγράμματος
+
Angle
-
Offset
- Μετατόπιση
+
SVG file
- Αρχείο SVG
+
Color
- Χρώμα
+
Border color
- Χρώμα περιγράμματος
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -48311,12 +48173,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -48324,17 +48186,17 @@ There was a problem with your symbol database.
Select SVG file
- Επιλογή αρχείου SVG
+
SVG files
- Αρχεία SVG
+
File not found
-
@@ -48342,17 +48204,17 @@ There was a problem with your symbol database.
Size
- Μέγεθος
+
area
- Επιφάνεια
+
diameter
-
@@ -48360,7 +48222,7 @@ There was a problem with your symbol database.
Layer %1
-
@@ -48368,17 +48230,17 @@ There was a problem with your symbol database.
Symbol Levels
-
Enable symbol levels
-
Define the order in which the symbol layers are rendered. The numbers in the cells define in which rendering pass the layer will be drawn.
-
@@ -48386,27 +48248,27 @@ There was a problem with your symbol database.
Symbol name
- Όνομα Συμβόλου
+
Please enter name for the symbol:
- Παρακαλώ εισάγετε όνομα για το σύμβολο:
+
New symbol
- Νέο σύμβολο
+
Save symbol
- Αποθήκευση συμβόλου
+
Symbol with name '%1' already exists. Overwrite?
-
@@ -48414,42 +48276,42 @@ There was a problem with your symbol database.
Symbol selector
-
Add symbol layer
-
Remove symbol layer
-
Lock layer's color
-
Move up
-
Move down
-
Save symbol
- Αποθήκευση συμβόλου
+
Save
- Αποθήκευση
+
@@ -48457,7 +48319,7 @@ There was a problem with your symbol database.
Millimeter
- Χιλιοστά
+
Symbol with name '%1' already exists. Overwrite?
-
Transparency %1%
-
@@ -48500,18 +48362,18 @@ There was a problem with your symbol database.
Linear
- Γραμμικός
+
Clough-Toucher (cubic)
-
Save triangulation to file
-
@@ -48519,27 +48381,27 @@ There was a problem with your symbol database.
Triangle based interpolation
-
Interpolation method
-
Export triangulation to shapefile after interpolation
-
Output file
- Αρχείο προορισμού
+
...
- ...
+
@@ -48547,12 +48409,12 @@ There was a problem with your symbol database.
Delete
- Διαγραφή
+
Select font color
-
@@ -48560,17 +48422,17 @@ There was a problem with your symbol database.
Annotation text
-
B
-
I
-
@@ -48583,7 +48445,7 @@ There was a problem with your symbol database.
Multiline
- Πολυγραμμή
+
Form
-
Tile scale
-
@@ -48609,172 +48471,172 @@ There was a problem with your symbol database.
QGIS Publications
-
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
Become an QGIS translator
-
QGIS Mailing lists
-
Is it 'QGIS' or 'Quantum GIS'?
-
QGIS is open source
-
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
Moving Elements and Maps in the Print Composer
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -48795,21 +48657,21 @@ There was a problem with your symbol database.
QGIS Tips!
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
-
I've had enough tips, don't show this on start up any more!
-
@@ -48817,42 +48679,42 @@ p, li { white-space: pre-wrap; }
Dialog
- Διάλογος
+
Select transformation type:
-
Linear
- Γραμμικός
+
Polynomial 1
- Πολυονομικού 1
+
Polynomial 2
- Πολυονομικού 2
+
Polynomial 3
- Πολυονομικού 3
+
Thin plate spline (TPS)
-
Generate ESRI world file (.tfw)
-
@@ -48860,12 +48722,12 @@ p, li { white-space: pre-wrap; }
Transformation settings
- Ρυθμίσεις μετασχηματισμού
+
Transformation type:
-
Cubic Spline
-
Lanczos
- Lanczos
+
Output raster:
-
Target SRS:
-
Generate pdf report:
-
Set Target Resolution
-
Create world file
-
Generate pdf map:
-
Use 0 for transparency when needed
-
Load in QGIS when done
-
Thin Plate Spline
-
Projective
-
Info
- Πληροφορίες
+
Please set output name
-
%1 requires at least %2 GCPs. Please define more
- %1 απαιτεί τουλάχιστον %2 φωτοσταθερές. Παρακαλώ προσδιορίστε περισσότερες
+
Invalid output file name
-
Save raster
-
Select save PDF file
-
PDF Format
- PDF Format
+
_modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -49043,12 +48905,12 @@ p, li { white-space: pre-wrap; }
Form
-
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Form
-
Adjust scaling range
-
@@ -49085,7 +48947,7 @@ p, li { white-space: pre-wrap; }
Could not open file %1
Error was:%2
-
@@ -49093,22 +48955,22 @@ Error was:%2
Form
-
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
-
Description
- Περιγραφή
+
Remove Selected
-
@@ -49131,7 +48993,7 @@ Error was:%2
Edit filter expression
-
@@ -49139,12 +49001,12 @@ Error was:%2
Form
-
Select layer, key column and value column
-
Key column
- Κλειδί στήλης
+
Value column
-
Allow null value
-
Allow multiple selections
-
Filter expression
-
(no selection)
- (χωρίς επιλογή)
+
@@ -49200,17 +49062,17 @@ Error was:%2
ColorBrewer ramp
-
Scheme name
-
Colors
- Χρώματα
+
Codec %1 not found. Falling back to system locale
-
Add Features
-
Delete Features
-
Change Attribute Values
-
Add Attributes
-
Delete Attributes
- Διαγραφή χαρακτηριστικών
+
Create Spatial Index
-
Fast Access to Features at ID
-
Change Geometries
-
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -49281,27 +49143,27 @@ Error was:%2
X attribute
- Πεδίο Χ
+
Y attribute
- Πεδίο Υ
+
Length attribute
-
Angle attribute
-
Height attribute
-
@@ -49309,46 +49171,46 @@ Error was:%2
Discrete
-
Continuous
-
Gradient file : %1
-
License file : %1
-
Edit Stop Color
-
Offset of the stop
-
Please enter offset in percents (%) of the new stop
-
Add Color Stop
-
@@ -49356,63 +49218,63 @@ Error was:%2
Gradient color ramp
-
Color 1
-
Color 2
-
Change...
- Αλλαγή...
+
Type
- Τύπος
+
Multiple stops
-
Add stop
-
Remove stop
-
Color
- Χρώμα
+
Offset (%)
-
Preview
- Προεπισκόπηση
+
Information
-
@@ -49420,150 +49282,150 @@ Error was:%2
Updating feature count for layer %1
-
Abort
- Ματαίωση
+
ERROR: no provider
-
ERROR: layer not editable
-
Commit errors:
%1
-
General
- Γενικά
+
Layer comment
-
Storage type of this layer
-
Description of this provider
-
Source for this layer
-
Geometry type of the features in this layer
-
Primary key attributes
-
The number of features in this layer
-
Editing capabilities of this layer
-
Extents
- Έκταση
+
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
Error: qgis element could not be found
-
xMin,yMin %1,%2 : xMax,yMax %3,%4
-
unknown extent
-
(Invalid transformation of layer extents)
-
Field
- Πεδίο
+
Type
- Τύπος
+
Length
- Μήκος
+
Precision
- Ακρίβεια
+
Comment
- Σχόλιο
+
@@ -49572,47 +49434,35 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
-
+
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
-
+
SUCCESS: %n attribute(s) added.
added attributes count
-
-
+
ERROR: %n new attribute(s) not added
not added attributes count
-
-
+
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
-
+
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
-
+
SUCCESS: %n feature(s) deleted.
deleted features count
-
-
+
ERROR: %n feature(s) not deleted.
not deleted features count
-
-
+
SUCCESS: %n feature(s) added.
added features count
-
-
+
ERROR: %n feature(s) not added.
not added features count
-
-
+
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
-
+
ERROR: %n geometries not changed.
not changed geometries count
-
-
+
Provider errors:
-
@@ -49729,7 +49552,7 @@ Error was:%2
QGIS Layer Style File
-
Load from database
-
Save in database (%1)
-
Layer Properties - %1
-
Stop editing mode to enable this.
-
Insert expression
- Εισαγωγή έκφρασης
+
This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
-
The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
-
Not supported
- Μη υποστηριζόμενο
+
Creation of spatial index successful
-
Creation of spatial index failed
-
Load default style from:
-
Cancel
- Ακύρωση
+
Local database
-
Datasource database
-
Default Style
-
Loaded from Provider
-
No default style was found for this layer
-
Save default style to:
-
Load layer properties from style file
-
Load Style
-
Style saved
-
Save layer properties as style file
-
Saved Style
-
Error occured retrieving styles from database
-
The retrieved style is not a valid named style. Error message: %1
-
Save Style
-
@@ -49894,32 +49717,32 @@ Error was:%2
Layer Properties
- Ιδιότητες Επιπέδου
+
Restore Default Style
-
Save As Default
-
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
Keyword list
-
DataUrl
-
Attribution
-
MetadataUrl
-
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Load Style ...
-
Labels (deprecated)
-
Specify the coordinate reference system of the layer's geometry.
-
Query Builder
-
Rendering
-
Coordinate reference system
-
Specify...
-
Scale dependent visibility
-
Feature subset
-
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
- pixels
+
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Map Tip display text
-
Inserts an expression into the action
-
The valid attribute names for this layer
- Τα έγκυρα ονόματα χαρακτηριστικό για αυτό το επίπεδο
+
Inserts the selected field into the action
-
Join layer
- Συνένωση επιπέδου
+
Join field
- Συνένωση πεδίου
+
No symbology
-
Feature symbology
-
Symbol layer symbology
-
Select the coordinate reference system for the vector file. The data points will be transformed from the layer coordinate reference system.
-
@@ -50293,7 +50116,7 @@ Error was:%2
Save vector layer as...
-
Encoding
- Κωδικοποίηση
+
Symbology export
-
Datasource Options
-
Custom Options
-
Layer Options
-
Save only selected features
-
This allows one to surpress attribute creation as some OGR drivers (eg. DGN, DXF) don't support it.
-
Skip attribute creation
-
Add saved file to map
-
1:
- 1:
+
Scale
- Κλίμακα
+
@@ -50387,46 +50210,46 @@ Error was:%2
Random color ramp
-
Hue
-
from
-
to
-
Saturation
-
Value
- Τιμή
+
Classes
-
Preview
- Προεπισκόπηση
+
@@ -50434,12 +50257,12 @@ Error was:%2
Edit...
- Επεξεργασία...
+
Delete
- Διαγραφή
+
@@ -50447,7 +50270,7 @@ Error was:%2
New Connection...
- Νέα Σύνδεση...
+
@@ -50455,12 +50278,12 @@ Error was:%2
Select a layer
-
No CRS selected
-
@@ -50468,7 +50291,7 @@ Error was:%2
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -50476,17 +50299,17 @@ Error was:%2
Edit...
- Επεξεργασία...
+
Delete
- Διαγραφή
+
Modify WFS connection
-
@@ -50494,12 +50317,12 @@ Error was:%2
DescribeFeatureType failed for url %1
-
WFS
- WFS
+
received %1 bytes from %2
-
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
@@ -50547,12 +50370,12 @@ Error was:%2
New Connection...
- Νέα Σύνδεση...
+
Create a new WFS connection
-
@@ -50560,57 +50383,57 @@ Error was:%2
&Add
-
&Build query
-
Build query
-
Network Error
-
Capabilities document is not valid
-
Server Exception
-
Error
- Σφάλμα
+
No Layers
-
capabilities document contained no layers.
-
Create a new WFS connection
-
Modify WFS connection
-
Add WFS Layer from a Server
-
Filter:
-
Display WFS FeatureTypes containing this word in the title, name or abstract
-
Server connections
-
Load connections from file
- Φόρτωση συνδέσεων από αρχείο
+
Use title for layer name
-
Coordinate reference system
-
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
Add selected layers to map
- Προσθήκη επιλεγμένων επιπέδων στο χάρτη
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Load connections
- Φόρτωση συνδέσεων
+
XML files (*.xml *XML)
- XML αρχεία (*.xml *XML)
+
encoding %1 not supported.
-
WMS Provider
-
Failed to parse WMS URI
-
Failed to download capabilities:
-
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
-
+
Select layer(s)
-
Select layer(s) or a tileset
-
Select either layer(s) or a tileset
-
Coordinate Reference System (%n available)
crs count
-
-
+
No common CRS for selected layers.
-
No CRS selected
-
No image encoding selected
-
%n Layer(s) selected
selected layer count
-
-
+
Tileset selected
-
Could not understand the response. The %1 provider said:
%2
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
The %1 connection already exists. Do you want to overwrite it?
-
Confirm Overwrite
-
@@ -50927,12 +50741,12 @@ Error was:%2
Ready
-
Layers
- Επίπεδα
+
Adds a few example WMS servers
-
Add default servers
-
ID
-
Name
- Όνομα
+
Title
- Τίτλος
+
Abstract
- Σύνοψη
+
Image encoding
-
Load connections from file
- Φόρτωση συνδέσεων από αρχείο
+
Load
-
Options
- Επιλογές
+
Layer name
- Όνομα επιπέδου
+
Coordinate Reference System
- Σύστημα Αναφοράς Συντεταγμένων
+
Add Layer(s) from a WM(T)S Server
-
Change ...
-
Tile size
- Μέγεθος πλακιδίων
+
Feature limit for GetFeatureInfo
-
Layer Order
-
Move selected layer UP
-
Up
-
Move selected layer DOWN
-
Down
- Μετακίνηση κάτω
+
Layer
- Επίπεδο
+
Tilesets
-
Tileset
-
CRS
-
Add selected row to WMS list
- Προσθήκη επιλεγμένης εγγραφής στον κατάλογο WMS
+
@@ -51140,49 +50954,49 @@ Error was:%2
empty capabilities document
-
Tried URL: %1
-
Capabilities request redirected.
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
WCS
- WCS
+
%1 of %2 bytes of capabilities downloaded.
-
Exception
- Εξαίρεση
+
Could not get WCS capabilities: %1
-
Dom Exception
-
Version not supported
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -51228,7 +51042,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
- WCS
+
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51305,27 +51119,27 @@ Response was:
Cannot describe coverage
-
Coverage not found
-
Cannot calculate extent
-
Cannot get test dataset.
-
Received coverage has wrong extent %1 (expected %2)
-
WCS
- WCS
+
Rotating raster
-
Block read OK
-
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
Getting map via WCS.
-
No data received
-
Cannot create memory file
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request is for a Coverage not offered by the service instance.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
(No error code was reported)
-
(Unknown error code)
-
The WCS vendor also reported:
-
composed error message '%1'.
-
Cannot verify coverage full extent: %1
-
Property
- Ιδιότητα
+
Value
- Τιμή
+
Name (identifier)
-
Title
- Τίτλος
+
Abstract
- Σύνοψη
+
Fixed Width
-
Fixed Height
-
Native Bounding Box
-
WGS 84 Bounding Box
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in format
-
Coverages
-
Cache Stats
-
Server Properties
-
Keywords
- Λέξεις κλειδιά
+
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
GetCapabilitiesUrl
-
Get Coverage Url
-
<font color="red">(advertised but ignored)</font>
-
And %1 more coverages
-
Format not supported
- Ο μορφότυπος δεν υποστηρίζεται
+
Read data error
-
RasterIO error:
-
@@ -51620,7 +51431,7 @@ Response was:
...
- ...
+
Field contains a filename or URL for a webpage
-
%1 of %2 bytes of capabilities downloaded.
-
Capabilities request redirected.
-
Redirect loop detected: %1
-
WMS
- WMS
+
empty of capabilities: %1
-
Download of capabilities failed: %1
-
@@ -51690,7 +51501,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51738,22 +51549,22 @@ Response was:
Cannot parse URI
-
Cannot calculate extent
-
Cannot set CRS
-
Number of layers and styles don't match
-
WMS
- WMS
+
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
Getting map via WMS.
-
Getting tiles.
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
image is NULL
-
unexpected image size
-
Status: %1
Reason phrase: %2
-
Redirect loop detected: %1
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request contains a CRS not offered by the server for one or more of the Layers in the request.
-
Request contains a SRS not offered by the server for one or more of the Layers in the request.
-
GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
-
Request is for a Layer in a Style not offered by the server.
-
GetFeatureInfo request is applied to a Layer which is not declared queryable.
-
GetFeatureInfo request contains invalid X or Y value.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
-
Request contains an invalid sample dimension value.
-
Request is for an optional operation that is not supported by the server.
-
(No error code was reported)
-
(Unknown error code)
-
The WMS vendor also reported:
-
Property
- Ιδιότητα
+
Value
- Τιμή
+
Name
- Όνομα
+
Visibility
-
Visible
-
Hidden
- Κρυφό
+
Title
- Τίτλος
+
Abstract
- Σύνοψη
+
Can Identify
-
Can be Transparent
-
Can Zoom In
-
Cascade Count
-
Fixed Width
-
Fixed Height
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in style
-
LegendURLs
-
Server Properties
-
Selected Layers
-
Other Layers
-
Tile Layer Properties
-
Cache Stats
-
WMS Version
-
Keywords
- Λέξεις κλειδιά
+
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
Identify Formats
-
Layer Count
-
Tile Layer Count
-
GetCapabilitiesUrl
-
GetMapUrl
-
<font color="red">(advertised but ignored)</font>
-
GetFeatureInfoUrl
-
GetLegendGraphic
-
GetTileUrl
-
Tile templates
-
FeatureInfo templates
-
Tileset Properties
-
Identifier
-
Tile mode
-
WMTS
-
WMS-C
-
Invalid tile mode
-
Selected
-
Available Styles
-
Bounding Box
-
Available Tilesets
-
Selected tile matrix set
-
Scale
- Κλίμακα
+
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
Width
- Πλάτος
+
Height
- Ύψος
+
Top
- Πάνω
+
Left
- Αριστερά
+
Bottom
- Κάτω
+
Right
- Δεξιά
+
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Cache stats
-
Hits
-
Misses
-
Errors
-
Format not supported
- Ο μορφότυπος δεν υποστηρίζεται
+
Context not fully specified (extent was defined but width and/or height was not).
-
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
GML schema is not valid
-
GML is not valid
-
Cannot identify
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
identify request redirected.
-
Map getfeatureinfo error %1: %2
-
Cannot parse getfeatureinfo: %1
-
Map getfeatureinfo error: %1 [%2]
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52451,18 +52241,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -52541,28 +52319,28 @@ Reason phrase: %2
Select dimensions
-
Dimension
-
Value
- Τιμή
+
Abstract
- Σύνοψη
+
Default
- Προεπιλογή
+
@@ -52570,22 +52348,22 @@ Reason phrase: %2
Dialog
- Διάλογος
+
Raster layer:
-
Polygon layer containing the zones:
-
Output column prefix:
-
@@ -52595,17 +52373,17 @@ Reason phrase: %2
&Zonal statistics
-
Calculating zonal statistics...
-
Abort...
- Αναίρεση...
+
@@ -52613,7 +52391,7 @@ Reason phrase: %2
Record Metadata
-
@@ -52621,17 +52399,17 @@ Reason phrase: %2
Export feature
-
Select destination layer
-
New temporary layer
-
@@ -52639,93 +52417,93 @@ Reason phrase: %2
Transportation layer
-
Layer
- Επίπεδο
+
Direction field
-
Value for forward direction
-
Value for reverse direction
-
Value two-way direction
-
Speed field
-
km/h
-
m/s
-
Default settings
-
Direction
- Διεύθυνση
+
Two-way direction
-
Forward direction
-
Reverse direction
-
Cost
-
Line lengths
-
Speed
- Ταχύτητα
+
Always use default
-
@@ -52733,42 +52511,42 @@ Reason phrase: %2
Road graph plugin settings
-
Time unit
-
Distance unit
-
Topology tolerance
-
second
-
hour
-
meter
-
kilometer
-
@@ -52776,34 +52554,34 @@ Reason phrase: %2
Shortest path
-
Start
-
Stop
- Διακοπή
+
Criterion
-
Length
- Μήκος
+
Time
- Χρόνος
+
Export
- Εξαγωγή
+
Point not selected
-
First, select start and stop points.
-
Plugin isn't configured
-
Plugin isn't configured!
-
Tie point failed
-
Start point doesn't tie to the road!
-
Stop point doesn't tie to the road!
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
Path not found
-
@@ -52887,13 +52665,13 @@ Reason phrase: %2
Road graph plugin settings
-
Road graph
-
@@ -52918,296 +52696,420 @@ Reason phrase: %2
SaDbTableModel
+ Schema
- Σχήμα ΒΔ
+ Σχήμα ΒΔ
+ Table
- Πίνακας
+ Πίνακας
+ Type
- Τύπος
+ Τύπος
+ SRID
- Κωδικός Συστήματος Συν/νων
+ Κωδικός Συστήματος Συν/νων
+ Line Interpretation
+
+
+ Geometry column
- Στήλη γεωμετρίας
+ Στήλη γεωμετρίας
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Αποθήκευση σύνδεσης
+ Αποθήκευση σύνδεσης
+ Should the existing connection %1 be overwritten?
- Επανεγγραφή της υπάρχουσας σύνδεσης %1?
+ Επανεγγραφή της υπάρχουσας σύνδεσης %1?
+ Failed to load interface
- Αποτυχία φόρτωσης διεπαφής
+ Αποτυχία φόρτωσης διεπαφής
+ Test connection
- Έλεγχος σύνδεσης
+ Έλεγχος σύνδεσης
+ Connection to %1 was successful
- Η σύνδεση στην %1 ήταν επιτυχής
+ Η σύνδεση στην %1 ήταν επιτυχής
+
+
+ Connection failed. Check settings and try again.
+
+SQL Anywhere error code: %1
+Description: %2
+
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Δημιουργία νέας σύνδεσης SQL Anywhere
+ Δημιουργία νέας σύνδεσης SQL Anywhere
+ Connection Information
- Πληροφορίες σύνδεσης
+ Πληροφορίες σύνδεσης
+ Name
- Όνομα
+ Όνομα
+ Host
- Εξυπηρετητής
+ Εξυπηρετητής
+ Port
- Θύρα
+ Θύρα
+ Server
- Εξυπηρετητής
+ Εξυπηρετητής
+ Database
- Βάση Δεδομένων
+ Βάση Δεδομένων
+ Connection Parameters
- Παράμετροι σύνδεσης
+ Παράμετροι σύνδεσης
+ Username
- Όνομα χρήστη
+ Όνομα χρήστη
+ Password
- Κωδικός πρόσβασης
+ Κωδικός πρόσβασης
+ Name of the new connection
- Όνομα της νέας σύνδεσης
+ Όνομα της νέας σύνδεσης
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Όνομα ή διεύθυνση IP του υπολογιστή που φιλοξενεί τον εξυπηρετητή ΒΔ (κενό για συνδέσεις στον τοπικό υπολογιστή)
+ Όνομα ή διεύθυνση IP του υπολογιστή που φιλοξενεί τον εξυπηρετητή ΒΔ (κενό για συνδέσεις στον τοπικό υπολογιστή)
+ Port number used by the database server (leave blank for default 2638)
+
+
+ Name of the database server (leave blank for default server on host)
+
+
+ Name of the database (leave blank for default database on server)
- Όνομα ΒΔ (κενό για την προεπιλεγμένη ΒΔ στον εξυπηρετητή)
+ Όνομα ΒΔ (κενό για την προεπιλεγμένη ΒΔ στον εξυπηρετητή)
+ Additional connection parameters
- Πρόσθετες παράμετροι σύνδεσης
+ Πρόσθετες παράμετροι σύνδεσης
+ Database username
- Όνομα Χρήστη ΒΔ
+ Όνομα Χρήστη ΒΔ
+ Database password
- Κωδικός πρόσβασης ΒΔ
+ Κωδικός πρόσβασης ΒΔ
+ Save the connection username in the registry
- Αποθήκευση ονόματος χρήστη στο μητρώου του συστήματος
+ Αποθήκευση ονόματος χρήστη στο μητρώου του συστήματος
+ Save Username
- Αποθήκευση ονόματος χρήστη
+ Αποθήκευση ονόματος χρήστη
+ &Test Connect
- &Έλεγχος σύνδεσης
+ &Έλεγχος σύνδεσης
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Αποθήκευση κωδικού πρόσβασης στο μητρώο (ΜΗ ΑΣΦΑΛΕΣ)
+ Αποθήκευση κωδικού πρόσβασης στο μητρώο (ΜΗ ΑΣΦΑΛΕΣ)
+ Save Password
- Αποθήκευση κωδικού πρόσβασης
+ Αποθήκευση κωδικού πρόσβασης
+ Encrypt packets using simple encryption
- Απλή κρυπτογράφηση πακέτων
+ Απλή κρυπτογράφηση πακέτων
+ Simple Encryption
- Απλή κρυπτογράφηση
+ Απλή κρυπτογράφηση
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
+
+
+ Estimate table metadata
- Εκτιμώμενα μεταδεδομένα πίνακα
+ Εκτιμώμενα μεταδεδομένα πίνακα
+ Search for geometry columns in tables owned by other users
- Αναζήτηση για στήλες γεωμετρίας σε πίνακες άλλων χρηστών
+ Αναζήτηση για στήλες γεωμετρίας σε πίνακες άλλων χρηστών
+ Search other users' tables
- Αναζήτηση σε πίνακες άλλων χρηστών
+ Αναζήτηση σε πίνακες άλλων χρηστών
SaSourceSelect
+ &Add
- &Προσθήκη
+ &Προσθήκη
+ &Set Filter
- &Ορισμός Φίλτρου
+ &Ορισμός Φίλτρου
+ Wildcard
- Χαρακτήρας αναπλήρωσης
+ Χαρακτήρας αναπλήρωσης
+ RegExp
- RegExp
+ RegExp
+ All
- Όλα
+ Όλα
+ Schema
- Σχήμα ΒΔ
+ Σχήμα ΒΔ
+ Table
- Πίνακας
+ Πίνακας
+ Type
- Τύπος
+ Τύπος
+ SRID
- Κωδικός Συστήματος Συν/νων
+ Κωδικός Συστήματος Συν/νων
+ Line Interpretation
+
+
+ Geometry column
- Στήλη γεωμετρίας
+ Στήλη γεωμετρίας
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Είστε σίγουροι οτι θέλετε να διαγράψετε τη σύνδεση %1 και τις σχετιζόμενες ρυθμίσεις;
+ Είστε σίγουροι οτι θέλετε να διαγράψετε τη σύνδεση %1 και τις σχετιζόμενες ρυθμίσεις;
+ Confirm Delete
- Επιβεβαίωση Διαγραφής
+ Επιβεβαίωση Διαγραφής
+ Select Table
- Επιλογή πίνακα
+ Επιλογή πίνακα
+ You must select a table in order to add a layer.
- Πρέπει να γίνει επιλογή ενός πίνακα ώστε να γίνει προσθήκη επιπέδου.
+ Πρέπει να γίνει επιλογή ενός πίνακα ώστε να γίνει προσθήκη επιπέδου.
+ Failed to load interface
- Αποτυχία φόρτωσης διεπαφής
+ Αποτυχία φόρτωσης διεπαφής
+ Connection failed
- Αποτυχία σύνδεσης
+ Αποτυχία σύνδεσης
+ Connection to database %1 failed. Check settings and try again.
+
+SQL Anywhere error code: %2
+Description: %3
+
+
+ No accessible tables found
- Δεν βρέθηκαν προσβάσιμοι πίνακες
+ Δεν βρέθηκαν προσβάσιμοι πίνακες
+ Database connection was successful, but no tables containing geometry columns were %1.
+
+
+ found
- βρέθηκε
+ βρέθηκε
+ found in your schema
- βρέθηκε στο σχήμα σας
+ βρέθηκε στο σχήμα σας
SaSourceSelectBase
+ Add SQL Anywhere layer
- Προσθήκη επιπέδου SQL Anywhere
+ Προσθήκη επιπέδου SQL Anywhere
+ SQL Anywhere Connections
- Συνδέσεις SQL Anywhere
+ Συνδέσεις SQL Anywhere
+ Delete
- Διαγραφή
+ Διαγραφή
+ Edit
- Επεξεργασία
+ Επεξεργασία
+ New
- Νέο
+ Νέο
+ Connect
- Σύνδεση
+ Σύνδεση
+ Search options
- Επιλογές αναζήτησης
+ Επιλογές αναζήτησης
+ Search
- Αναζήτηση
+ Αναζήτηση
+ Search mode
- Τρόπος αναζήτησης
+ Τρόπος αναζήτησης
+ Search in columns
- Αναζήτηση σε στήλες
+ Αναζήτηση σε στήλες
SaveAsPythonScriptAction
I/O error
- Σφάλμα I/O
+ Σφάλμα I/O
Unable to save edits. Reason:
%s
- Αδυναμία αποθήκευσης αλλαγών. Αιτία: %s
+ Αδυναμία αποθήκευσης αλλαγών. Αιτία: %s
@@ -53218,7 +53120,7 @@ Reason phrase: %2
Processing R script (*.rsx)
-
Save script
@@ -53292,48 +53194,48 @@ Reason phrase: %2
Editor
-
Auto-save script before running
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Enable Object Inspector (switching between tabs may be slow)
-
APIs
-
Using preloaded APIs file
-
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
@@ -53540,20 +53442,24 @@ Reason phrase: %2
SqlAnywhere
+ Add SQL Anywhere Layer...
- Προσθήκη επιπέδου SQL Anywhere...
+ Προσθήκη επιπέδου SQL Anywhere...
+ Store vector layers within a SQL Anywhere database
- Αποθήκευση διανυσματικών επιπέδων σε βάσηδεδομένων SQL Anywhere
+ Αποθήκευση διανυσματικών επιπέδων σε βάσηδεδομένων SQL Anywhere
+ Invalid Layer
- Μη έγκυρο επίπεδο
+ Μη έγκυρο επίπεδο
+ %1 is an invalid layer and cannot be loaded.
- Το %1 είναι ένα μη έγκυρο επίπεδο και δεν μπορεί να φορτωθεί.
+ Το %1 είναι ένα μη έγκυρο επίπεδο και δεν μπορεί να φορτωθεί.
@@ -53581,7 +53487,7 @@ Reason phrase: %2
Open Library
-
Symbols in group
-
Statistics output
-
Nearest neighbour analysis
@@ -53779,7 +53685,7 @@ Reason phrase: %2
Force point inside polygon
-
@@ -53968,7 +53874,7 @@ Reason phrase: %2
Gradient type
-
Coord mode
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Offset along line
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Blur strength
-
Offset X,Y
- Μετατόπιση κατά Χ,Υ
+
Data defined properties...
- Καθορισμός ιδιοτήτων από τα δεδομένα...
+
@@ -54397,17 +54303,17 @@ Reason phrase: %2
Cap style
-
Use custom dash pattern
-
Dash pattern unit
-
Form
-
Vector field type
-
Polar
-
Cartesian
-
Distance unit
-
@@ -54727,7 +54633,7 @@ Reason phrase: %2
XML Request / Response
-
Topology Checker
- Έλεγχος Τοπολογίας
+
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55020,7 +54926,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55030,7 +54936,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -56479,7 +56463,7 @@ Click on one of the icons along the top of the composer window to select what ty
Input DXF file
-
Please specify a file to convert.
-
Shapefile
-
@@ -56741,7 +56725,7 @@ For support send a mail to scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n
p, li { white-space: pre-wrap; }\n
@@ -57508,7 +57492,7 @@ Plugin will not be enabled.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -57524,1857 +57508,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -59427,10 +59357,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59444,10 +59374,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -59468,10 +59398,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -59484,12 +59414,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -59505,16 +59435,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -59543,15 +59473,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -59568,17 +59498,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -59592,17 +59522,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -59618,16 +59548,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -59641,10 +59571,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -59657,10 +59587,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -59674,12 +59604,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -59693,12 +59623,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -59713,17 +59643,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -59733,10 +59663,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -59751,12 +59681,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -59770,12 +59700,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -59789,10 +59719,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -59809,12 +59739,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -59828,17 +59758,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -59853,10 +59783,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -59867,12 +59797,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -59886,17 +59816,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -59909,12 +59839,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -59931,14 +59861,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -59952,15 +59882,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -59969,15 +59899,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -60008,14 +59938,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -60034,14 +59964,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -60146,12 +60076,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -60165,10 +60095,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -60182,10 +60112,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -60202,10 +60132,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -60221,9 +60151,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -60263,7 +60193,7 @@ Returns a string representation of a color based on its hue, saturation, value a
(Optional) column to read labels
-
Assign new value to column as result of operation on columns only if the result of query is TRUE
-
Attribute field
-
Attribute field (interpolated values)
-
Attribute field to (over)write
-
Auto-balancing of colors for LANDSAT-TM raster
-
Bicubic or bilinear spline interpolation with Tykhonov regularization
-
Bilinear interpolation utility for raster maps
-
Blend color components for two rasters by given ratio
-
Blend red, green, raster layers to obtain one color raster
-
Break (topologically clean) polygons (imported from non topological format, like ShapeFile). Boundaries are broken on each point shared between 2 and more polygons where angles of segments are different
-
Break lines at each intersection of vector
-
Brovey transform to merge multispectral and high-res panchromatic channels
-
Build polylines from lines
-
Calculate average of raster within areas with the same category in a user-defined base map
-
Calculate covariance/correlation matrix for user-defined rasters
-
Calculate error matrix and kappa parameter for accuracy assessment of classification result
-
Calculate geometry statistics for vectors
-
Calculate linear regression from two rasters: y = a + b*x
-
Calculate median of raster within areas with the same category in a user-defined base map
-
Calculate mode of raster within areas with the same category in a user-defined base map
-
Calculate optimal index factor table for LANDSAT-TM raster
-
Calculate raster surface area
-
Calculate shadow maps from exact sun position
-
Calculate shadow maps from sun position determinated by date/time
-
Calculate statistics for raster
-
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Category or object oriented statistics
-
Cats
-
Cats (select from the map or using their id)
-
Change category values and labels
-
Change field
-
Change layer number
-
Change resolution
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Change the type of geometry elements
-
Choose appropriate format
-
Columns management
-
Compares bit patterns with raster
-
Compress and decompress raster
-
Compress raster
-
Computes a coordinate transformation based on the control points
-
Concentric circles
-
Connect nodes by shortest route (traveling salesman)
-
Connect selected nodes by shortest tree (Steiner tree)
-
Connect vector to database
-
Convert 2D vector to 3D by sampling raster
-
Convert 2D vector to 3D vector by sampling of elevation raster. Default sampling by nearest neighbour
-
Convert GRASS binary vector to GRASS ASCII vector
-
Convert a raster to vector within GRASS
-
Convert a vector to raster within GRASS
-
Convert bearing and distance measurements to coordinates and vice versa
-
Convert boundaries to lines
-
Convert centroids to points
-
Convert coordinates
-
Convert coordinates from one projection to another (cs2cs frontend)
-
Convert lines to boundaries
-
Convert points to centroids
-
Convert raster to vector areas
-
Convert raster to vector lines
-
Convert raster to vector points
-
Convert vector to raster using attribute values
-
Convert vector to raster using constant
-
Convex hull
-
Copy a table
-
Copy also attribute table (only the table of layer 1 is currently supported)
-
Count of neighbouring points
-
Create 3D volume map based on 2D elevation and value rasters
-
Create a MASK for limiting raster operation
-
Create a map containing concentric rings
-
Create a raster plane
-
Create and add new table to vector
-
Create and/or modify raster support files
-
Create aspect raster from DEM (digital elevation model)
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create grid in current region
-
Create new GRASS location and transfer data into it
-
Create new GRASS location from metadata file
-
Create new GRASS location from raster data
-
Create new GRASS location from vector data
-
Create new layer with category values based upon user's reclassification of categories in existing raster
-
Create new location from .prj (WKT) file
-
Create new raster by combining other rasters
-
Create new vector by combining other vectors
-
Create new vector with current region extent
-
Create nodes on network
-
Create points/segments from input vector lines and positions
-
Create quantization file for floating-point raster
-
Create random 2D/3D vector points
-
Create random cell values with spatial dependence
-
Create random points
-
Create random raster
-
Create random vector point contained in raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create shaded map
-
Create slope raster from DEM (digital elevation model)
-
Create standard vectors
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
DXF vector layer
-
Database
- Βάση Δεδομένων
+
Database connection
-
Database file
-
Database management
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Develop map
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector attributes
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
E00 vector layer
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export from GRASS
-
Export raster as non-georeferenced PNG image format
-
Export raster from GRASS
-
Export raster series to MPEG movie
-
Export raster to 8/24bit TIFF image at the resolution of the current region
-
Export raster to ASCII text file
-
Export raster to ESRI ARCGRID
-
Export raster to GRIDATB.FOR map file (TOPMODEL)
-
Export raster to Geo TIFF
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to VTK-ASCII
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extract features from vector
-
Extract selected features
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
File management
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Filter image
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Help
- Βοήθεια
+
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Hydrologic modelling
-
Imagery
-
Import ASCII raster
-
Import DXF vector
-
Import ESRI ARC/INFO ASCII GRID
-
Import ESRI E00 vector
-
Import GDAL supported raster
-
Import GDAL supported raster and create a fitted location
-
Import GRIDATB.FOR (TOPMODEL)
-
Import MapGen or MatLab vector
-
Import OGR vector
-
Import OGR vector and create a fitted location
-
Import OGR vectors in a given data source combining them in a GRASS vector
-
Import SPOT VGT NDVI
-
Import SRTM HGT
-
Import US-NGA GEOnet Names Server (GNS) country file
-
Import all OGR/PostGIS vectors in a given data source and create a fitted location
-
Import attribute tables in various formats
-
Import binary MAT-File(v4)
-
Import binary raster
-
Import from database into GRASS
-
Import geonames.org country files
-
Import into GRASS
-
Import loaded raster
-
Import loaded raster and create a fitted location
-
Import loaded vector
-
Import loaded vector and create a fitted location
-
Import only some layers of a DXF vector
-
Import raster from ASCII polygon/line
-
Import raster from coordinates using univariate statistics
-
Import raster into GRASS
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage features
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Network analysis
-
Network maintenance
-
Number of rows to be skipped
-
Others
-
Output GML file
-
Output Shapefile
- Output Shapefile
+
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Projection conversion of vector
-
Projection management
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster
-
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reports
-
Reports and statistics
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
-
Split lines to shorter segments
-
Statistics
-
Sum raster cell values
-
Surface management
-
Tables management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Terrain analysis
-
Tests of normality on vector points
-
Text file
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform features
-
Transform image
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
-
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector
-
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
@@ -62459,34 +62389,34 @@ Returns a string representation of a color based on its hue, saturation, value a
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
- Συνδέσεις φορτώνονται
+
@@ -62494,7 +62424,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Layer1ID
-
Layer2ID
-
No layer
-
Invalid second geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
@@ -62686,7 +62616,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Filled:
-
Empty:
@@ -62694,7 +62624,7 @@ Returns a string representation of a color based on its hue, saturation, value a
N:
-
Mean:
@@ -62718,7 +62648,7 @@ Returns a string representation of a color based on its hue, saturation, value a
CV:
-
Number of unique values:
@@ -62734,19 +62664,19 @@ Returns a string representation of a color based on its hue, saturation, value a
Observed mean distance:
-
Expected mean distance:
-
Nearest neighbour index:
-
Z-Score:
-
@@ -62780,4 +62710,4 @@ Returns a string representation of a color based on its hue, saturation, value a
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_en.ts b/i18n/qgis_en.ts
index 05f3dc0c1b0..d32a0e1e1c3 100644
--- a/i18n/qgis_en.ts
+++ b/i18n/qgis_en.ts
@@ -16816,48 +16816,84 @@ Please try a lower resolution or a smaller papersize
+ QgsComposerHtml
+
+ HTML fetch %1 failed with error %2
+
+
QgsComposerHtmlWidget
- Use existing frames
- Extend to next page
- Repeat on every page
- Repeat until finished
- Change html url
- Select HTML document
- Change resize mode
- Evaluate expressions changed
+
+
+ Use smart breaks changed
+
+ Page break distance changed
+
+
+ HTML changed
+
+
+ HTML source changed
+
+
+ Insert expression
+
QgsComposerHtmlWidgetBase
@@ -16867,52 +16903,77 @@ Please try a lower resolution or a smaller papersize
- HTML frame
- Main properties
-
-
- URL
- ...
- Resize mode
+ HTML Source
- Add Frame
+ If checked, expressions inside [% %] tags will be evaluated prior to rendering the HTML
+
+
+ Evaluate QGIS expressions in HTML source
+
+
+ Source:
+
+
+ Insert an expression
+
+
+ Frames
Resize mode
+
+
+ Add Frame
+
+
+ Use smart page breaks
- Maximum distance
- mm
- Refresh HTML
@@ -18556,32 +18617,32 @@ Please try a lower resolution or a smaller papersize
QgsComposerMouseHandles
- Change item position
- Change item size
- %1 items selected
- 1 item selected
- dx: %1 mm dy: %2 mm
- width: %1 mm height: %2 mm
@@ -19337,93 +19398,113 @@ Please try a lower resolution or a smaller papersize
QgsComposerTableWidget
- Map %1
- Table feature filter toggled
- Table feature filter modified
- Expression based filter
- Table header alignment changed
- Table layer changed
- Table attribute settings
- Select header font color
+
+
+ Select content font color
+
+
+ Table map changed
- Table maximum columns
- Select Font
- Table header font
- Table header font color
+
+
+ Table content font
- Table content font color
+
+
+ Table grid stroke
- Select grid color
- Table grid color
- Table grid toggled
- Table visible only toggled
@@ -19436,101 +19517,120 @@ Please try a lower resolution or a smaller papersize
- Attribute table
- Main properties
- Layer
- Attributes...
- Feature filtering
+
+
+ Composer map
- Color
+
+
+ Fonts and text styling
+
+
+ Table heading
+
+
+ Alignment
+
+
+ Font
+
+
+ Choose font...
+
+
+ Table contents
+
+
+ Maximum rows
- Margin
- Show only visible features
- Refresh table data
- Filter with
- ...
- mm
- Show grid
- Stroke width
-
- Color...
-
-
- Fonts
-
-
- Header font...
-
-
- Content font...
-
-
- Header alignment
-
Follow column alignment
@@ -19679,107 +19779,107 @@ Please try a lower resolution or a smaller papersize
QgsComposition
- Label added
- Map added
- Arrow added
- Scale bar added
- Shape added
- Picture added
- Legend added
- Table added
- Aligned items left
- Aligned items horizontal center
- Aligned items vertical center
- Aligned items right
- Aligned items top
- Aligned items bottom
- Items locked
- Items unlocked
- Item z-order changed
- Remove item group
- Frame deleted
- Item deleted
- Multiframe removed
diff --git a/i18n/qgis_eu.ts b/i18n/qgis_eu.ts
index afa7f985a91..de5f5e8bfa6 100644
--- a/i18n/qgis_eu.ts
+++ b/i18n/qgis_eu.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Liburutegia:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> geometry_columns taula ez da existitzen!
Taula hau funtsezkoa da GIS aplikazio askorentzat, taulak zerrendatzeko erabiltzen baitute.
@@ -417,13 +415,13 @@ Taula hau funtsezkoa da GIS aplikazio askorentzat, taulak zerrendatzeko erabiltz
Script-ak:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> Instalatutako script-en bertsioa ez dator bat argitaratutako script-enekin!
Beharbada PostGISen bertsio-berritze oker baten ondorio da.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Erabiltzaile honek ez dauka geometry_columns taulako edukiak irakurtzeko pribilegiorik!
Taula hori funtsezkoa da GIS aplikazio askorentzat, taulak zerrendatzeko erabiltzen baitute.
@@ -2096,7 +2094,7 @@ Honek ustekabeko emaitzak izan ditzake.
luzera-eremua
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Ezin da existitzen den %s shapefile-a ezabatu
@@ -2404,47 +2402,24 @@ Seguru zaude jarraitu nahi duzula?
uneko hautapenetik kenduz
- Select by location
Hautatu kokapenaren arabera
- Select features in:
Hautatu elementuak hemen:
- that intersect features in:
hemengo elementuekin gurutzatzen direnak:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Aldatu uneko hautapena honekin:
+ Aldatu uneko hautapena honekin:
Use selected features only
- Erabili hautatutako elementuak soilik
+ Erabili hautatutako elementuak soilik
Please specify select layer
@@ -3406,7 +3381,7 @@ Plugina ez da gaituko.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4725,7 +4700,7 @@ tresnaren Laguntz botoian sakatzean.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Banda bakarra kolore-taula batekin duen datu-multzo bat 3 (RGB) edo 4 (RGBA) banda edukiko balitu bezala erakusteko.
Erabilgarria kolore indexatuko datu-multzoak onartzen ez dituzten irteera-kontrolagailuetarako (JPEG, JPEG2000, MrSID, ECW).
@@ -5525,7 +5500,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&Editatu
@@ -5545,157 +5520,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Hautatu
- Measure
Neurtu
- &Decorations
&Apaingarriak
- &Layer
&Geruzak
- New
Berria
- &Plugins
Pl&uginak
- &Help
&Laguntza
- &Settings
E&zarpenak
- &Raster
&Rasterra
- Vect&or
Bekt&oriala
- &OpenStreetMap
&OpenStreetMap
- File
Fitxategia
- Manage Layers
Kudeatu geruzak
- Digitizing
Digitalizazioa
- Advanced Digitizing
Digitalizazio aurreratua
- Map Navigation
Mapa-nabigazioa
- Attributes
Atributuak
- Plugins
Pluginak
- Help
Laguntza
- Raster
Rasterra
- Label
Etiketa
- Vector
Bektoriala
- Database
Datu-basea
- Web
Weba
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Gorde irudi gisa...
- &New Print Composer
Inprimatze-&konposatzaile berria
- Ctrl+P
Ctrl+P
- Composer Manager...
Konposatzaile-kudeatzailea...
@@ -5715,948 +5690,940 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Berria txantiloitik
- Preview Mode
Aurrebista-modua
- Paste Features as
Itsatsi elementu geografikoak honela:
- &New
&Berria
- &Open...
&Ireki...
- &Save
&Gorde
- Save &As...
Gorde &honela...
- Exit QGIS
Irten QGISetik
- Ctrl+Q
Ctrl+Q
- &Undo
&Desegin
- Ctrl+Z
Ctrl+Z
- &Redo
&Berregin
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Moztu elementu geografikoak
- Ctrl+X
Ctrl+X
- Copy Features
Kopiatu elementu geografikoak
- Ctrl+C
Ctrl+C
- Paste Features
Itsatsi elementu geografikoak
- Ctrl+V
Ctrl+V
- Add Feature
Gehitu elementua
- Ctrl+.
Ctrl+.
- Move Feature(s)
Mugitu elementua(k)
- Reshape Features
Aldatu elementuen forma
- Split Features
Zatitu elementuak
- Split Parts
Zatitu zatiak
- Delete Selected
Ezabatu hautatuak
- Add Ring
Gehitu eraztuna
- Add Part
Gehitu zatia
- Simplify Feature
Sinplifikatu elementu geografikoa
- Delete Ring
Ezabatu eraztuna
- Delete Part
Ezabatu zatia
- Merge Selected Features
Fusionatu hautatutako elementuak
- Merge Attributes of Selected Features
Fusionatu hautatutako elementuen atributuak
- Node Tool
Nodoen tresna
- Rotate Point Symbols
Biratu puntuen sinboloak
- Snapping Options...
Atxikitze-aukerak...
- Pan Map
Desplazatu mapa
- Zoom In
Handiagotu
- Ctrl++
Ctrl++
- Zoom Out
Txikiagotu
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Hautatu elementu bakarra
+ Hautatu elementu bakarra
+ Select Features by Rectangle
- Hautatu elementuak laukizuzen bidez
+ Hautatu elementuak laukizuzen bidez
- Select Features by Polygon
Hautatu elementuak poligono bidez
- Select Features by Freehand
Hautatu elementuak esku hutsez
- Select Features by Radius
Hautatu elementuak erradio bidez
- Deselect Features from All Layers
Desautatu geruza guztietako elementuak
- Identify Features
Identifikatu elementuak
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Neurtu lerroa
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Neurtu azalera
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Neurtu angelua
- Zoom Full
Zoom osoa
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Zoom geruzara
- Zoom to Selection
Zoom hautapenera
- Ctrl+J
Ctrl+J
- Zoom Last
Zoom aurrekora
- Zoom Next
Zoom hurrengora
- Zoom Actual Size
Zoom uneko tamainara
- Zoom to Native Pixel Resolution
Zoom jatorrizko pixel-bereizmenera
- Map Tips
Mapa-argibideak
- Show information about a feature when the mouse is hovered over it
Erakutsi elementu geografiko bati buruzko informazioa sagua gainetik pasatzean
- New Bookmark...
Laster-marka berria...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Erakutsi laster-markak
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Freskatu
- Text Annotation
Testu-oharpena
- Form Annotation
Formulario-oharpena
- Move Annotation
Mugitu oharpena
- Labeling
Etiketatzea
- Layer Labeling Options
Geruzak etiketatzeko aukerak
- New Shapefile Layer...
Shapefile geruza berria...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
SpatiaLite geruza berria...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Raster-kalkulagailua...
- Add Vector Layer...
Gehitu geruza bektoriala...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Gehitu raster-geruza...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Gehitu PostGIS geruzak...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Gehitu SpatiaLite geruza...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Gehitu MSSQL Spatial geruza...
- Add Oracle Spatial Layer...
Gehitu Oracle Spatial geruza...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Gehitu WMS/WMTS geruza...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Ireki atributu-taula
- Toggle Editing
Txandakatu edizioa
- Toggles the editing state of the current layer
Uneko geruzaren edizio-egoera txandakatzen du
- Save for Selected Layer(s)
Gorde hautatutako geruz(et)arako
- Save edits to current layer, but continue editing
Gorde uneko geruzaren edizioa, baina jarraitu editatzen
- Save As...
Gorde honela...
- Add from Layer Definition File...
Gehitu geruza-definizioko fitxategitik...
- Save As Layer Definition File...
Gorde geruza-definizioko fitxategi gisa...
- Normal
Normala
- Normal preview mode
Aurrebista-modu normala
- Simulate Photocopy (Grayscale)
Simulatu fotokopia (gris-eskala)
- Simulate photocopy (grayscale)
Simulatu fotokopia (gris-eskala)
- Simulate Fax (Mono)
Simulatu faxa (monotonua)
- Simulate fax (mono)
Simulatu faxa (monotonua)
- Simulate Color Blindness (Protanope)
Simulatu daltonismoa (protanopia)
- Simulate color blindness (protanope)
Simulatu daltonismoa (protanopia)
- Simulate Color Blindness (Deuteranope)
Simulatu daltonismoa (deuteranopia)
- Simulate color blindness (deuteranope)
Simulatu daltonismoa (deuteranopia)
- Set Scale Visibility of Layer(s)
Ezarri geruz(ar)en ikusgaitasun-eskala
- Remove Layer(s)
Kendu geruza(k)
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Ezarri geruz(ar)en CRSa
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Ezarri proiektuaren CRSa geruzatik hartuta
- Properties...
Propietateak...
- Query...
Kontsulta...
- Add to Overview
Gehitu ikuspegi orokorrari
- Add All to Overview
Gehitu dena ikuspegi orokorrera
- Remove All from Overview
Kendu dena ikuspegi orokorretik
- Show All Layers
Erakutsi geruza guztiak
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Ezkutatu geruza guztiak
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Kudeatu eta instalatu pluginak...
- Open Field Calculator
Ireki eremu-kalkulagailua
- Add Delimited Text Layer...
Gehitu testu mugatuko geruza...
- Add Delimited Text Layer
Gehitu testu mugatuko geruza
- New Vector Layer
Geruza bektorial berria
- Paste features in clipboard into a new OGR vector layer.
Itsatsi arbeleko elementuak OGR geruza bektorial berrian.
- New Memory Vector Layer
Memoriako geruza bektorial berria
- Paste features in clipboard into a new memory vector layer.
Itsatsi arbeleko elementuak memoriako geruza bektorial berrian.
- Toggle Full Screen Mode
Txandakatu pantaila osoaren modua
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Proiektuaren propietateak...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Aukerak...
- Custom CRS...
CRS pertsonalizatua...
- Configure shortcuts...
Konfiguratu laster-teklak...
- Local Histogram Stretch
Histograma lokalaren luzatzea
- Stretch histogram of active raster to view extents
Luzatu raster aktiboaren histograma hedadura ikusteko
- Help Contents
Laguntzaren edukiak
- F1
F1
- API documentation
API dokumentazioa
- QGIS Home Page
QGISen webgunea
- Ctrl+H
Ctrl+H
- Check QGIS Version
Egiaztatu QGISen bertsioa
- Check if your QGIS version is up to date (requires internet access)
Egiaztatu zure QGIS bertsioa eguneratuta dagoen (interneterako sarbidea behar duzu)
- About
Honi buruz
- QGIS Sponsors
QGIS diruz lagundu dutenak
- Move Label
Mugitu etiketa
- Rotate Label
Biratu etiketa
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Biratu etiketa
Ctrl (Cms) handitu 15 graduz.
- Change Label
Aldatu etiketa
- Style Manager...
Estilo-kudeatzailea...
- Python Console
Python kontsola
- Full histogram stretch
Histograma osoaren luzatzea
- Stretch Histogram to Full Dataset
Luzatu datu-multzo osoaren histograma
- Customization...
Pertsonalizazioa...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Hau hemen dago laster-teklen gatazkak saihesteko, laster-tekla QgsCustomization-en dago
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Kapsulatu geruzak eta taldeak...
- Embed layers and groups from other project files
Kapsulatu beste proiektu-fitxategi batzuetako geruzak eta taldeak
- &Copyright Label
&Copyright-etiketa
- Creates a copyright label that is displayed on the map canvas.
Mapa-oihalean erakutsiko den copyright-etiketa sortzen du.
- &North Arrow
&Iparrorratza
- "Creates a north arrow that is displayed on the map canvas"
Mapa-oihalean erakutsiko den eskala-barra bat sortzen du
- &Scale Bar
&Eskala-barra
- Creates a scale bar that is displayed on the map canvas
Mapa-oihalean erakutsiko den eskala-barra bat sortzen du
- Add WFS Layer...
Gehitu WFS geruza...
- Add WFS Layer
Gehitu WFS geruza
- Feature Action
Elementu-ekintza
- Run Feature Action
Exekutatu elementu-ekina
- Pan Map to Selection
Mugitu mapa hautapenera
- Touch zoom and pan
Ukitu zoom-a eta mugitu
- Offset Curve
Desplazamendu-kurba
- Copy style
Kopiatu estiloa
- Paste style
Itsatsi estiloa
- Add WCS Layer...
Gehitu WCS geruza...
- &Grid
&Sareta
- Grid
Sareta
- Pin/Unpin Labels
Finkatu/askatu etiketak
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6667,44 +6634,44 @@ Shift askatzeko, Ctl (Cmd) egoera txandakatzeko
Geruza editagarri guztietan du eragina
- Highlight Pinned Labels
Nabarmendu finkatutako etiketak
- New Blank Project
Proiektu berria
- Local Cumulative Cut Stretch
Mozketa luzatu metatu lokala
- Local cumulative cut stretch using current extent, default limits and estimated values.
Mozketa luzatu metatu lokala uneko hedadura, muga lehenetsiak eta balio zenbatetsiak erabiliz.
- Full Dataset Cumulative Cut Stretch
Datu-multzo osoaren mozketa luzatu metatua
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Mozketa luzatu metatua datu-multzo osoa, muga lehenetsiak eta balio estimatuak erabiliz.
- Show/Hide Labels
Erakutsi/ezkutatu etiketak
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6715,128 +6682,128 @@ Shift+klik etiketan ezkutatzeko
Uneko geruza editagarrian du eragina
- Html Annotation
HTML oharpena
- Duplicate Layer(s)
Bikoiztu geruza(k)
- SVG annotation
SVG oharpena
- Save for All Layers
Gorde geruza guztiak
- Rollback for All Layers
Desegin geruza guztietan
- Cancel for All Layers
Utzi geruza guztietan
- Rollback for Selected Layer(s)
Desegin hautatutako geruz(et)an
- Current Edits
Uneko edizioak
- Cancel for Selected Layer(s)
Utzi hautatutako geruz(et)an
- Save Layer Edits
Gorde geruza-edizioak
- Rotate Feature(s)
Biratu elementua(k)
- &Download data
&Deskargatu datuak
- &Import topology from XML
&Inportatu topologia XMLtik
- &Export topology to SpatiaLite
&Esportatu topologia SpatiaLite-ra
- Increase brightness
Handitu distira
- Decrease brightness
Txikitu distira
- Increase contrast
Handitu kontrastea
- Decrease contrast
Txikitu kontrastea
- Select By Expression
Hautatu adierazpen bidez
- Select features using an expression
Hautatu elementuak adierazpen baten bidez
- Need commercial support?
Laguntza komertziala behar duzu?
- DXF Export...
DXF esportazioa...
- Fill Ring
Bete eraztuna
@@ -7282,11 +7249,6 @@ Uneko geruza editagarrian du eragina
Can't save model
Ezin da eredua gorde
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
Ereduak ez dauka ez algoritmorik ez parametrorik eta ezin da exekutatu
@@ -7314,7 +7276,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- Hautatutako eredua ezin izan da kargatu.
+ Hautatutako eredua ezin izan da kargatu.
Lerro okerra: %s
@@ -8165,22 +8127,22 @@ Lerro okerra: %s
Eratorri normalak estimatzen...
- minidump written to %1
mini-iraulketa %1(e)n idatzi da
- writing of minidump to %1 failed (%2)
mini-iraulketa %1(e)n idazteak huts egin du (%2)
- creation of minidump to %1 failed (%2)
mini-iraulketa %1(e)n sortzeak huts egin du (%2)
- Crash dumped
Kraskadura irauli da
@@ -8331,6 +8293,7 @@ Errorea(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
Sortutako CRSa
@@ -8495,85 +8458,85 @@ Errorea(%2): %3
Ezin izan da '%1' Interval motara bihurtu
- Cannot convert '%1' to boolean
Ezin izan da '%1' boolean motara bihurtu
- Domain max must be greater than domain min
Domeinu max domeinu min baino handiagoa izan behar du
- Exponent must be greater than 0
Berretzaileak 0 baino handiagoa izan behar du
- Invalid regular expression '%1': %2
Adierazpen erregular baliogabea '%1': %2
- Index is out of range
Indizea barrutitik kanpo dago
- Cannot convert '%1:%2:%3' to color
Ezin da '%1:%2:%3' kolore batean bihurtu
- Cannot convert '%1:%2:%3:%4' to color
Ezin da '%1:%2:%3:%4' kolore batean bihurtu
- "%1" is not a valid color ramp
"%1" ez da baliozko kolore-malda bat
- Cannot convert '%1:%2:%3:%4:%5' to color
Ezin da '%1:%2:%3:%4:%5' kolore batean bihurtu
- function help for %1 missing
%1 funtzioaren laguntza falta da
- Operators
Eragileak
- Fields and Values
Eremuak eta balioak
- Math
Matematika
- Conversions
Bihurketak
- Conditionals
Baldintzak
@@ -8620,58 +8583,58 @@ Errorea(%2): %3
urte|urte
- Date and Time
Ordua eta eguna
- String
Katea
- Color
Kolorea
- Geometry
Geometria
- Record
Erregistroa
- No root node! Parsing failed?
Ez dago erro-nodorik! Analisiak huts egin al du?
- (no root)
(errorik ez)
- Unary minus only for numeric values.
Unario minusa zenbakizko balioetarako soilik.
- Can't preform /, *, or % on DateTime and Interval
Ezin da erabili /, *, edo % DateTime eta Interval motetan
- [unsupported type;%1; value:%2]
onartzen ez den moa;%1; balioa:%2]
- Column '%1' not found
Ez da aurkitu '%1' zutabea
@@ -8759,10 +8722,7 @@ Errorea(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- %1 lerroak %n nodo bikoiztu ditu %2 tokian
- %1 lerroak %n nodo bikoiztu d(it)u %2 tokian
-
+ %1 lerroak %n nodo bikoiztu ditu %2 tokian %1 lerroak %n nodo bikoiztu d(it)u %2 tokian
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Cannot overwrite a OGR layer in place
-
Shapeburst fill
-
Version 0.1
@@ -9885,6 +9846,7 @@ Only %1 of %2 features written.
Layers
Geruzak
@@ -9982,12 +9944,12 @@ Only %1 of %2 features written.
Could not reproject view extent: %1
-
Could not reproject layer extent: %1
-
Shapefile-tik PostgreSQL/PostGISera inportatzeko tresna
+ SQL Anywhere plugin
- SQL Anywhere plugina
+ SQL Anywhere plugina
+ Store vector layers within a SQL Anywhere database
- Geruza bektorialak SQL Anywhere datu-basean gordetzen ditu
+ Geruza bektorialak SQL Anywhere datu-basean gordetzen ditu
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGISek ezin izan du zure GRASS instalatzioa aurkitu.
Zure GRASS instalazioaren bidea (GISBASE) zein den zehaztu nahi duzu?
@@ -10586,7 +10550,7 @@ Zure GRASS instalazioaren bidea (GISBASE) zein den zehaztu nahi duzu?
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
OpenFileGDB
-
GeoPackage
-
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
- Fetching features failed.
SQL:%1
Error: %2
@@ -10917,7 +10881,7 @@ SQL:%1
Errorea: %2
- Oracle
Oracle
@@ -11009,7 +10973,7 @@ Datu-basearen errorea: %2
Infinite filter rectangle specified
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
zati anitzeko elementua
+ Error describing bind parameters
- Errorea lotura-parametroak deskribatzean
+ Errorea lotura-parametroak deskribatzean
+ Error binding parameters
- Errorea parametroak lotzean
+ Errorea parametroak lotzean
Simplify transform error caught: %1
-
empty capabilities document
- kapazitateen dokumentua hutsik dago
+
Dom Exception
- DOM salbuespena
+
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- Legenda
+
QSpatiaLiteDriver
- Error opening database
Errorea datu-basea irekitzean
- Error closing database
Errorea datu-basea ixtean
- Unable to begin transaction
Ezin da transakzioa hasi
- Unable to commit transaction
Ezin da transakzioa egikaritu
- Unable to rollback transaction
Ezin da transakzioa desegin
@@ -11578,27 +11539,27 @@ Response was:
Kontsultarik ez
- Unable to execute statement
Ezin da instrukzioa exekutatu
- Unable to execute multiple statements at a time
Ezin dira hainbat instrukzio aldi berean exekutatu
- Unable to reset statement
Ezin da instrukzioa berrezarri
- Unable to bind parameters
Ezin dira parametroak lotu
- Parameter count mismatch
Parametroen zenbaketa ez dator bat
@@ -11775,61 +11736,61 @@ Response was:
QGIS prest!
- Minimize
Ikonotu
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Leiho aktiboa dock-era ikonotzen du
- Zoom
Zoom
- Toggles between a predefined size and the window size set by the user
Aurrez ezarritako tamaina baten eta erabiltzaileak ezarritako leiho-tamainaren artean txandakatzen du
- Bring All to Front
Ekarri dena aurrera
- Bring forward all open windows
Ekarri aurrera leiho ireki guztiak
- Current Edits
Uneko edizioak
- Error
Errorea
- Failed to open Python console:
Ezin izan da Python kontsola ireki:
@@ -11852,138 +11813,138 @@ Jarri harremanetan garatzaileekin.
QGIS - %1 ('%2')
- Panels
Panelak
- Toolbars
Tresna-barrak
- Window
Leihoa
- &Database
&Datu-basea
- &Web
&Weba
- Progress bar that displays the status of rendering layers and other time-intensive operations
Errendatzen ari diren geruzen eta denbora asko behar duten beste eragiketa batzuen egoera erakusten duen aurrerapen-barra
- Toggle extents and mouse position display
Hedadura eta saguaren kokapenaren bistaratzea txandakatzen ditu
- Coordinate:
Koordenatua:
- Current map coordinate
Uneko mapa-koordenatua
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Uneko kurtsore-posizioaren mapa-koordenatuak erakusten ditu. Bistaratzea etengabe eguneratzen da sagua mugitzean. Oihalaren erdigunea posizio jakin batean kokatzea ere ahalbidetzen du. Formatua lat,lon edo ekialdea,iparraldea da
- Current map coordinate (lat,lon or east,north)
Uneko mapa-koordenatua (lat,lon edo ekialdea,iparraldea)
- Scale
Eskala
- Current map scale
Uneko mapa-eskala
- Displays the current map scale
Uneko mapa-eskala erakusten du
- Current map scale (formatted as x:y)
Uneko mapa-eskala (x:y formatua erabiliz)
- Render
Errendatzea
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Markatuta dagoenean, mapa-geruzak mapa-nabigazioko komandoei eta beste gertaera batzuei erantzunez errendatzen dira. Markatuta ez dagoenean, ez da errendatzea gauzatzen. Honela, geruza asko gehitu eta sinbolizatu ahal dituzu errendatzea gertatu baino lehen.
- Toggle map rendering
Txandakatu mapa-errendatzea
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Ikono honek koordenatuen erreferentzia-sistemen transformazio dinamikoa gaituta dagoen ala ez erakusten du. Egin klik ikonoan proiektuaren propietateen leihoa ireki eta portaera hori aldatzeko.
- CRS status - Click to open coordinate reference system dialog
CRS egoera - Klik koordenatuen erreferentzia-sistemen koadroa irekitzeko
- Ready
Prest
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Maparen ikuspegi orokorraren oihala. Oihal hau mapa-oihalaren uneko hedadura erakusten duen kokapen-mapa bat bistaratzeko erabil daiteke. Uneko hedadura laukizuzen gorri gisa erakusten da. Maparen edozein geruza gehi dakioke ikuspegi orokorraren oihalari.
- Overview
Ikuspegi orokorra
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Mapa-oihalean dauden geruza guztiak erakusten dituen mapa-legenda. Egin klik kontrol-laukian geruza bat aktibatu edo desaktibatzeko. Egin klik bi aldiz geruza batean haren itxura pertsonalizatu eta beste propietate batzuk ezartzeko.
- Layers
Geruzak
- Map layer list that displays all layers in drawing order.
Mapa-geruzen zerrenda, geruza guztiak marrazte-ordenan erakusten dituena.
- Layer order
Geruza-ordena
@@ -11993,394 +11954,388 @@ Jarri harremanetan garatzaileekin.
qgis.db pribatua
- < Blank >
< Hutsik >
- QGIS version
QGIS bertsioa
- QGIS code revision
QGIS kode-berrikuspena
- Compiled against Qt
Qt erabiliz konpilatua
- Running against Qt
Qt erabiliz exekutatua
- Compiled against GDAL/OGR
GDAL/OGR erabiliz konpilatua
- Running against GDAL/OGR
GDAL/OGR erabiliz exekutatua
- PostgreSQL Client Version
PostgreSQL bezeroaren bertsioa
- No support.
Ez da onartzen.
- SpatiaLite Version
SpatiaLite bertsioa
- QWT Version
QWT bertsioa
- PROJ.4 Version
PROJ.4 bertsioa
- QScintilla2 Version
QScintilla2 bertsioa
- This copy of QGIS writes debugging output.
QGISen kopia honek arazketa-irteera idazten du.
- %1 doesn't have any layers
%1(e)k ez dauka geruzarik
- Invalid Data Source
Baliogabeko datu-iturria
- %1 is not a valid or recognized data source
%1 ez da baliozko datu-iturri ezaguna
- Vector
Bektoriala
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Ezin da atzitu PostgreSQLren hautatze-koadroa hornitzailetik.
- %1 is an invalid layer - not loaded
%1 geruza baliogabea da - ez da kargatu
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 geruza baliogabea da eta ezin da kargatu. Begiratu <a href="#messageLog">mezu-egunkaria</a> informazio gehiagorako.
- QGIS files
QGIS fitxategiak
- No legend entries selected
Ez da legenda-sarrerarik hautatu
- Select the layers and groups you want to remove in the legend.
Hautatu legendatik kendu nahi dituzun geruzak eta taldeak.
- Remove layers and groups
Kendu geruzak eta taldeak
- Remove %n legend entries?
number of legend items to remove
-
- Kendu %n legenda-sarrera?
-
+ Kendu %n legenda-sarrera?
- %n legend entries removed.
number of removed legend entries
-
- %n legenda-sarrera kendu dira.
-
+ %n legenda-sarrera kendu dira.
- %1 (%2 type unsupported)
%1 (%2 mota ez da onartzen)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/en/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Uneko proiektua gorde nahi duzu? %1
- Invalid Layer
Baliogabeko geruza
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Ezin da atzitu SpatiaLiteren hautatze-koadroa hornitzailetik.
- Delimited Text
Testu mugatua
- Cannot get Delimited Text select dialog from provider.
Ezin da atzitu testu mugatuko fitxategien hautatze-koadroa hornitzailetik.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Ezin da atzitu MSSQLren hautatze-koadroa hornitzailetik.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Ezin da atzitu Oracleren hautatze-koadroa hornitzailetik.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Ezin da atzitu WMSren hautatze-koadroa hornitzailetik.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Ezin da atzitu WCSren hautatze-koadroa hornitzailetik.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Ezin da atzitu WFSren hautatze-koadroa hornitzailetik.
- Default failed to open: %1
Lehenetsia irekitzeak huts egin du: %1
- Default not found: %1
Ez da aurkitu lehenetsia: %1
- Open Template Project
Ireki txantiloi-proiektua
- Auto-open Project
Ireki proiektua automatikoki
- Failed to open: %1
Ezin izan da ireki: %1
- Not valid project file: %1
Baliogabeko proiektu-fitxategia: %1
- Project failed to open: %1
Ezin izan da proiektua ireki: %1
- Default template has been reopened: %1
Txantiloi lehenetsia berriro ireki da: %1
- File not found: %1
Ez da fitxategia aurkitu: %1
- Calculating...
Kalkulatzen...
- Abort...
Abortatu...
- Choose a QGIS project file to open
Hautatu irekiko den QGIS proiektu-fitxategia
- Loading project: %1
Proiektua kargatzen: %1
- Unable to open project
Ezin izan da proiektua ireki
- Security warning
Segurtasun-abisua
- project macros have been disabled.
Proiektuaren makroak desgaitu egin dira.
- Enable macros
Gaitu makroak
- Project loaded
Proiektua kargatuta
- Choose a QGIS project file
Hautatu QGIS proiektu-fitxategia
- Saved project to: %1
Gorde proiektua hona: %1
- Unable to save project %1
Ezin izan da %1 proiektua gorde
- Choose a file name to save the QGIS project file as
Hautatu fitxategi-izen bat QGIS proiektu-fitxategia gordetzeko
- Unable to load %1
Ezin izan da %1 kargatu
- Choose a file name to save the map image as
Hautatu fitxategi-izen bat mapa-irudia gordetzeko
- Saved map image to %1
Mapa-irudia %1(e)ra gorde da
- Default system font substituted.
Sistemaren letra-tipo lehenetsia ordezkatu da.
- Labeling
Etiketatzea
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
<b><u>%1</u></b> geruzarako letra-tipoa ez da aurkitu (<i>%2</i>). %3
- Open labeling dialog
Ireki etiketatze-koadroa
@@ -12481,451 +12436,445 @@ Jarri harremanetan garatzaileekin.
Data/ordua
- Compiled against GEOS
GEOS erabiliz konpilatua
- Running against GEOS
GEOS erabiliz exekutatua
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
Geruzaren sorrerak huts egin du. Begiratu <a href="#messageLog">mezu-egunkaria</a> informazio gehiagorako.
- Insufficient permissions
Baimenik gutxiegi
- The project file is not writable.
Proiektu-fitxategia ez da idazgarria.
- DXF export completed
DXF esportazioa osatu da
- DXF export failed
DXF esportazioak huts egin du
- Commit errors
Egikaritze-erroreak
- Could not commit changes to layer %1
Ezin izan dira %1 geruzaren aldaketak egikaritu
- Errors: %1
Erroreak: %1
- Show more
Erakutsi gehiago
- Labeling Options
Etiketatze-aukerak
- Please select a vector layer first
Hautatu geruza bektorial bat lehenengo
- Layer labeling settings
Geruzak etiketatzeko ezarpenak
- Reading raster
Rasterra irakurtzen
- Cannot write raster error code: %1
Rasterra ezin idatzi izanaren errore-kodea: %1
- Saving done
Gorde da
- Export to vector file has been completed
Fitxategi bektorialerako esportazioa osatu da
- Save error
Gordetze-errorea
- Export to vector file failed.
Error: %1
Fitxategi bektorialera esportazioak huts egin du.
Errorea: %1
- No Layer Selected
Ez da geruzarik hautatu
- To delete features, you must select a vector layer in the legend
Elementuak ezabatzeko, legendako geruza bektorial bat hautatu behar duzu
- No Vector Layer Selected
Ez da geruza bektorialik hautatu
- Deleting features only works on vector layers
Elementuen ezabatzea geruza bektorialetan soilik egin daiteke
- Provider does not support deletion
Hornitzaileak ez du ezabaketa onartzen
- Data provider does not support deleting features
Datu-hornitzaileak ez du onartzen elementuak ezabatzerik
- Layer not editable
Geruza ez da editagarria
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Uneko geruza ez dago editatzeko moduan. Hautatu 'Hasi edizioa' digitalizaziorako tresna-barran.
- No Features Selected
Ez da elementurik hautatu
- The current layer has not selected features
Uneko geruzak ez dauka elementu hautaturik
- Delete features
Ezabatu elementuak
- Delete %n feature(s)?
number of features to delete
-
- Ezabatu %n elementu?
- Ezabatu %n elementu?
-
+ Ezabatu %n elementu? Ezabatu %n elementu?
- Features deleted
Elementuak ezabatu dira
- Problem deleting features
Arazoa elementuak ezabatzean
- A problem occured during deletion of features
Arazoa gertatu da elementuak ezabatzean
- %n feature(s) deleted.
number of features deleted
-
- %n elementu ezabatu d(ir)a.
-
+ %n elementu ezabatu d(ir)a.
- Merging features...
Elementuak batzen...
- Abort
Abortatu
- Create unique print composer title
Sortu inprimatze-konposatzailearen izenburu bakarra
- (title generated if left empty)
(sortuko den izenburua hutsik uzten bada)
- Composer title
Konposatzaile-izenburua
- Title can not be empty!
Izenburuak ezin du hutsik geratu!
- Title already exists!
Izenburua jadanik existitzen da!
- Composer %1
%1. konposatzailea
- copy
kopiatu
- No active layer
Ez dago geruza aktiborik
- No active layer found. Please select a layer in the layer list
Ez da geruza aktiborik aurkitu. Hautatu geruza bat geruzen zerrendan
- Active layer is not vector
Geruza aktiboa ez da bektoriala
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Elementuak fusionatzeko tresnak geruza bektorialetan soilik lan egiten du. Hautatu geruza bektorial bat geruzen zerrendatik
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Elementuen fusioa edizio-moduan dauden geruzetan soilik erabil daiteke. Fusio-tresna erabiltzeko, aktibatu Geruza -> Txandakatu edizioa
- Not enough features selected
Ez dira aski elementu hautatu
- The merge tool requires at least two selected features
Fusio-tresnak gutxienez bi elementu hautatu behar ditu
- Merged feature attributes
Fusionatutako elementu-atributuak
- Merge failed
Fusioak huts egin du
- An error occured during the merge operation
Errorea gertatu da bat egiteko eragiketan
- Union operation canceled
Batuketa-eragiketa utzi egin da
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
Batuketa-eragiketak uneko geruzarekin bateragarria ez den geometria-mota sortuko lukeenez, bertan behera utzi da
- Merged features
Fusionatutako elementuak
- No active vector layer
Ez dago geruza bektorial aktiborik
- To select features, choose a vector layer in the legend
Elementuak hautatzeko, hautatu legendako geruza bektorial bat
- Features cut
Elementuak moztu dira
- Features pasted
Elementuak itsatsi dira
- Paste features
Itsasi elementuak
- no features could be successfully pasted.
ezin izan da elementurik itsatsi.
- %1 features were successfully pasted.
%1 elementu itsatsi da.
- %1 of %2 features could be successfully pasted.
%2 elementutik %1 itsatsi ahal izan da.
- Pasted
Itsatsita
- New memory layer name
Memoriako geruza berriaren izena
- Layer name
Geruza-izena
- No features in clipboard.
Ez dago elementurik arbelean.
- No features with geometry found, point type layer will be created.
Ez da aurkitu geometriarik duen elementurik, puntuen geruza sortuko da.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Geometria-mota anitz aurkitu da, %1 motakoak ez diren geometriak dituzten elementuak geometriarik gabe sortuko dira.
- Cannot create new layer
Ezin da geruza berria sortu
- Cannot create field %1 (%2,%3)
Ezin da %1 eremua sortu (%2,%3)
- Cannot copy style: %1
Ezin da estiloa kopiatu: %1
- Cannot parse style: %1:%2:%3
Ezin da estiloa analizatu: %1:%2:%3
- Cannot read style: %1
Ezin da estiloa irakurri: %1
- Start editing failed
Edizioaren hasierak huts egin du
- Provider cannot be opened for editing
Hornitzailea ezin da ireki ediziorako
- Stop editing
Gelditu edizioa
- Do you want to save the changes to layer %1?
%1 geruzaren aldaketak gorde nahi dituzu?
- Problems during roll back
Arazoak atzera itzultzen
- Could not %1 changes to layer %2
Errors: %3
@@ -12935,342 +12884,339 @@ Errors: %3
Erroreak: %3
- rollback
itzuli atzera
- cancel
utzi
- Save
Gorde
- all
dena
- Rollback
Itzuli atzera
- Cancel
Utzi
- Current edits
Uneko edizioak
- %1 current changes for %2 layer(s)?
%1 uneko aldaketa %2 geruzatan?
- copy
kopiatu
- Plugin layer
Plugin-geruza
- Memory layer
Memoria-geruza
- Duplicate layer:
Bikoiztu geruza:
- %1 (duplication resulted in invalid layer)
%1 (bikoizketak geruza baliogabea eman du)
- Set scale visibility for selected layers
Ezarri ikusgaitasun-eskala hautatutako geruzetarako
- Couldn't load Python support library: %1
Ezin izan da Python euskarrirako liburutegia kargatu: %1
- Couldn't resolve python support library's instance() symbol.
Ezin izan da Python euskarrirako liburutegiaren instance() ikurra ebatzi.
- Python support ENABLED :-)
Python euskarria GAITUTA :-)
- There is a new version of QGIS available
QGISen bertsio berria dago eskuragarri
- You are running a development version of QGIS
QGISen garapen-bertsioa erabiltzen ari zara
- You are running the current version of QGIS
QGISen uneko bertsioa erabiltzen ari zara
- Would you like more information?
Informazio gehiago nahi duzu?
- QGIS Version Information
QGISen bertsio-informazioa
- QGIS - Changes since last release
QGIS - Aldaketak azken bertsiotik
- Unable to get current version information from server
Ezin izan da uneko bertsio-informazioa eskuratu zerbitzaritik
- Connection refused - server may be down
Konexioa ukatu da - agian zerbitzaria erorita dago
- QGIS server was not found
Ez da QGIS zerbitzaria aurkitu
- Unknown network socket error: %1
Sare-socket errore ezezaguna: %1
- Unable to communicate with QGIS Version server
%1
Ezin da QGIS %1 bertsio-zerbitzariarekin komunikatu
- To perform a full histogram stretch, you need to have a raster layer selected.
Histograma-luzatze osoa gauzatzeko, raster-geruza bat hautatu behar duzu.
- To change brightness or contrast, you need to have a raster layer selected.
Distira edo kontrastea aldatzeko, raster-geruza bat hautatuta eduki behar duzu.
- en
documentation language
en
- Layer is not valid
Geruza ez da baliozkoa
- The layer %1 is not a valid layer and can not be added to the map
%1 geruza ez da baliozkoa eta ezin zaio mapari gehitu
- The layer is not a valid layer and can not be added to the map
Geruza ez da baliozkoa eta ezin zaio mapari gehitu
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Proiektuak gorde gabeko edizioak ditu(zt)en eta oraindik edizioan dauden geruza(k) d(it)u, eta edizio horiek ez dira gordeko!
- Save?
Gorde?
- Current CRS: %1 (OTFR enabled)
Uneko CRSa: %1 (OTRF gaituta)
- Current CRS: %1 (OTFR disabled)
Uneko CRSa: %1 (OTRF desgaituta)
- Map coordinates for the current view extents
Uneko bista-hedaduraren mapa-koordenatuak
- Map coordinates at mouse cursor position
Saguaren kurtsore-posizioaren mapa-koordenatuak
- Extents:
Hedadura:
- Maptips require an active layer
Mapa-oharrek geruza aktibo bat behar dute
- %n feature(s) selected on layer %1.
number of selected features
-
- %n elementu hautatu di(r)a %1 geruzan.
- %n elementu hautatu di(r)a %1 geruzan.
-
+ %n elementu hautatu di(r)a %1 geruzan. %n elementu hautatu di(r)a %1 geruzan.
- Open a GDAL Supported Raster Data Source
Ireki GDALek onartutako raster datu-iturria
- Error adding valid layer to map canvas
Errorea baliozko geruza gehitzen mapa-oihalari
- Raster layer
Raster-geruza
- %1 is not a supported raster data source
%1 ez da onartutako raster datu-iturria
- Unsupported Data Source
Onartzen ez den datu-iturria
- Exit QGIS
Irten QGISetik
- Do you really want to quit QGIS?
Benetan irten nahi duzu QGISetik?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Proiektu-fitxategi hau QGISen bertsio zaharrago batekin gorde zen. Proiektu-fitxategi hau gordetzean, QGISek azken bertsiora eguneratuko du, eta seguru asko QGISen bertsio zaharragoek ezin izango dute berriro ireki.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Proiektu hau QGISen bertsio zaharrago batekin gorde zen. Proiektu-fitxategi hau gordetzean, QGISek azken bertsiora eguneratuko du, eta seguru aski QGISen bertsio zaharragoek ezingo dute ireki.<p>QGISen garatzileak atzerako bateragarritasuna mantentzen saiatzen dira, baina hala ere proiektu-fitxategi zaharraren zenbait informazio galdu egin daiteke. QGISen kalitatea hobetzeko, eskertuko genuke akats-txosten bat beteko bazenu %3 helbidean. Segurtatu proiektu-fitxategi zaharra eransten duzula, eta adierazi QGISen zein bertsio erabili zenuen, errorea hobeto aurkitu ahal izateko.<p>Proiektu-fitxategi zahar bat irekitzean ematen den abisu hau kentzeko, kendu '%5' kontrol-laukiaren marka %4 menuan.<p>Proiektu-fitxategiaren bertsioa: %1<br>QGISen egungo bertsioa: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Ezarpenak:Aukerak:Orokorra</tt>
- Warn me when opening a project file saved with an older version of QGIS
Abisatu QGISen bertsio zaharrago batekin proiektu-fitxategi bat irekitzean
- Project file is older
Proiektu-fitxategia zaharragoa da
- This project file was saved by an older version of QGIS
Proiektu-fitxategi hau QGISen bertsio zaharrago batekin gorde zen
- Please check the <a href="#messageLog">message log</a> for further info.
Begiratu <a href="#messageLog">mezu-egunkaria</a> informazio gehiagorako.
- A network request timed out, any data received is likely incomplete.
Sare-eskari bat denbora-mugaz kanpo geratu da, jasotako datuak segurua asko ez dira osoak.
- Warning
Abisua
- This layer doesn't have a properties dialog.
Geruza honek ez dauka propietateen koadroa.
- Authentication required
Beharrezkoa da autentifikatzea
- Proxy authentication required
Proxy-autentifikazioa beharrezkoa da
- SSL errors occured accessing URL %1:
SSL erroreak gertatu dira %1 URLa atzitzean:
-
Always ignore these errors?
@@ -13279,13 +13225,10 @@ Always ignore these errors?
Beti ezikusi errore hauek?
- %n SSL errors occured
number of errors
-
- SSL errorre %n gertatu da
- %n SSL errorre gertatu dira
-
+ SSL errorre %n gertatu da %n SSL errorre gertatu dira
@@ -13317,7 +13260,7 @@ Beti ezikusi errore hauek?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13667,19 +13610,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
Salbuespena
- unknown exception
salbuespen ezezaguna
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13704,7 +13647,7 @@ Erabiltzaile.-DBaren bidea:%9
-
match indentation of application state
@@ -13712,24 +13655,24 @@ Erabiltzaile.-DBaren bidea:%9
- [ERROR] Can not make qgis.db private copy
[ERROREA] Ezin da egin qgis.db-ren kopia pribatua
- Could not open qgis.db
Ezin da qgis.db ireki
- Migration of private qgis.db failed.
%1
qgis.db pribatuaren migrazioak huts egin du.
%1
- Update of view in private qgis.db failed.
%1
qgis.db pribatuko bistaratzearen eguneraketak huts egin du.
@@ -13739,28 +13682,28 @@ Erabiltzaile.-DBaren bidea:%9
QgsAtlasComposition
- Atlas filter eval error: %1
Atlas-iragazkiaren ebaluazio-errorea: %1
- Composer
Konposatzailea
- No matching atlas features
Ez da aurkitu bat datorren atlas-elementurik
- Atlas feature %1 of %2
Atlaseko %1 elementua %2(e)tik
- Atlas filename evaluation error: %1
Atlasaren fitxategi-izenaren ebaluazio-errorea: %1
@@ -13776,7 +13719,7 @@ Erabiltzaile.-DBaren bidea:%9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Ezin izan da fitxategi-izenaren eredu gisa '%1' ezarri. Analisi-errorea: %2
@@ -14469,10 +14412,7 @@ Parser error:
Attribute table - %1 (%n Feature(s))
feature count
-
- Atributu-taula - %1 (%n elementu)
- Atributu-taula - %1 (%n elementu)
-
+ Atributu-taula - %1 (%n elementu) Atributu-taula - %1 (%n elementu)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Seguru zaude %n laster-marka ezabatu nahi d(it)uzula?
-
+ Seguru zaude %n laster-marka ezabatu nahi d(it)uzula?
QgsCategorizedSymbolRendererV2Model
- Symbol
Ikurra
- Value
Balioa
- Label
Etiketa
@@ -15255,49 +15192,49 @@ Datu-basea:%2
Aurreratua
- Random colors
Ausazko koloreak
- Symbol levels...
Ikur-mailak...
- High number of classes!
Klaseen kopuru handia!
- Classification would yield %1 entries which might not be expected. Continue?
Sailkapenak %1 sarrera ekoiztuko lituzke, baina hori ustekabekoa izan daiteke. Jarraitu?
- Error
Errorea
- There are no available color ramps. You can add them in Style Manager.
Ez dago kolore-maldarik erabilgarri. Estilo-kudeatzailean malda berriak sor ditzakezu.
- The selected color ramp is not available.
Hautatutako kolore-malda ez dago erabilgarri.
- Confirm Delete
Baieztatu ezabaketa
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Sailkapen-eremua aldatu egin da, '%1' eremutik '%2' eremura.
Existitzen diren klaseak ezabatuko dira sailkapena egin baino lehen?
@@ -15355,25 +15292,20 @@ Existitzen diren klaseak ezabatuko dira sailkapena egin baino lehen?
QgsColorButton
- Select Color
Hautatu kolorea
- Copy color
Kopiatu kolorea
- Paste color
Itsatsi kolorea
-
- Pick color
-
QgsColorDialog
@@ -15445,7 +15377,7 @@ Existitzen diren klaseak ezabatuko dira sailkapena egin baino lehen?
Composer
Konposatzailea
@@ -15604,8 +15536,8 @@ Existitzen diren klaseak ezabatuko dira sailkapena egin baino lehen?
Set as atlas feature for %1
Ezarri atlas-elementu gisa %1(e)rako
@@ -15642,7 +15574,7 @@ Existitzen diren klaseak ezabatuko dira sailkapena egin baino lehen?
Choose a file name to save the map as
Hautatu fitxategi-izen bat mapa gordetzeko
@@ -15653,15 +15585,15 @@ Existitzen diren klaseak ezabatuko dira sailkapena egin baino lehen?
Empty filename pattern
Fitxategi-izenerako eredua hutsik
The filename pattern is empty. A default one will be used.
Fitxategi-izenaren eredua hutsik dago. Lehenetsia erabiliko da.
@@ -15672,15 +15604,15 @@ Existitzen diren klaseak ezabatuko dira sailkapena egin baino lehen?
Unable to write into the directory
Ezin izan da idatzi direktorioan
The given output directory is not writable. Cancelling.
Emandako irteera-direktorioa ez da idazgarria. Uzten.
@@ -15690,251 +15622,251 @@ Existitzen diren klaseak ezabatuko dira sailkapena egin baino lehen?
Atlas processing error
Errorea atlasa prozesatzean
Feature filter parser error: %1
Elementu-iragazkiaren analisi-errorea: %1
Error creating %1.
-
Rendering maps...
Mapak errendatzen...
Abort
Abortatu
- Big image
Irudi handia
- To create image %1x%2 requires about %3 MB of memory. Proceed?
%1x%2 tamainako irudia sortzeak %3 MB inguru memoria beharko ditu. Jarraitu?
- Choose a file name to save the map image as
Hautatu fitxategi-izen bat mapa-irudia gordetzeko
- Memory Allocation Error
Errorea memoria-esleipenean
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
#%1 irudia ( %2x%3 @ %4dpi ) sortzen saiatzeak memoria-gainezkatze bat eragin dezake.
Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
- Image export error
-
- Directory where to save image files
Irudi-fitxategiak gordeko diren direktorioa
- Image format:
Irudi-formatua:
- SVG warning
SVG abisua
- Don't show this message again
Ez erakutsi mezu hau berriro
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>SVGak esportatzeko funtzioak zenbait arazo ditu QGISen, akatsak eta arazoak baitaude
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4 svg kodean. Batez ere, arazoak daude geruzak ez direlako maparen muga-kutxatik mozten.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Formatu bektorialeko irteera bat behar baduzu, saia zaitez PostScript formatura inprimatzen, SVG irteera egokia ez bada.</p>
- SVG Format
SVG formatua
- Directory where to save SVG files
SVG fitxategiak gordeko diren direktorioa
- SVG export error
-
- on page
orrian
- SVG error
SVG errorea
- There was an error in SVG output for SVG layer
Errorea gertatu da SVG geruza sortzeko SVG irteeran
- copy
kopiatu
- Duplicating composer...
Konposatzailea bikoizten...
- Duplicate Composer
Bikoiztu konposatzailea
- Composer duplication failed.
Konposatzailearen bikoizketak huts egin du.
- Save template
Gorde txantiloia
- Composer templates
Konposatzaile-txantiloiak
- Save error
Gordetze-errorea
- Error, could not save file
Errorea, ezin izan da fitxategia gorde
- Load template
Kargatu txantiloia
- Read error
Irakutze-errorea
- Error, could not read file
Errorea, ezin izan da fitxategia irakurri
- Composer error
Konposatzaile-errorea
- Error, could not create new composer
Errorea, ezin izan da konposatzaile berria sortu
- Loading template into composer...
Txantiloia konposatzailean kargatzen...
- Project contains WMS layers
Proiektuak WMS geruzak ditu
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Zenbait WMS zerbitzarik (adib. UMN mapserver) mugak dituzte WIDTH (zabalera) eta HEIGHT (altuera) parametroetan. Zerbitzari horietako geruzak inprimatzeak muga hori gaindi dezake, eta kasu horietan WMS geruza ez da inprimatuko
- Project contains composition effects
Proiektuak konposizio-efektuak ditu
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Proiektu honetan konposizio-efektu aurreratuak gaituta daude, esaterako nahaste-moduak edo geruza bektorialen gardentasuna. Horiek ezin dira bektore gisa inprimatu, gomendagarria da raster gisa inprimatzea.
- Print as raster
Inprimatu raster gisa
- Landscape
Horizontala
@@ -17079,67 +17011,67 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
QgsComposerItemWidget
- Frame color changed
Markoaren kolorea aldatu da
- Background color changed
Atzeko planoaren kolorea aldatu da
- Item position changed
Elementu-kokapena aldatu da
- Item outline width
Elementu-trazuaren zabalera
- Item frame join style
Elementu-markoaren elkartze-estiloa
- Item frame toggled
Elementu-markoa txandakatu da
- Item background toggled
Elementuaren atzealdea txandakatu da
- Select background color
Atzeko planoa hautatu da
- Select frame color
Hautatu markoaren kolorea
- Item blend mode changed
Elementuen nahaste-modua aldatu da
- Item transparency changed
Elementu-gardentasuna aldatu da
- Item id changed
Elementuaren IDa aldatu da
- Item rotation changed
Elementuaren biraketa aldatu da
@@ -17152,115 +17084,104 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Aukera globalak
- Position and size
Kokapena eta tamaina
- Reference point
Erreferentzia-puntua
- X
X
- Y
Y
- Width
Zabalera
- Height
Altuera
- Page
Orria
- ...
- ...
-
-
- Rotation
Biraketa
- °
°
- Frame
Markoa
- mm
mm
- Join style
Elkartze-estiloa
- Rendering
Errendatzea
- Blending mode
Nahaste-modua
- Thickness
Lodiera
- Color...
Kolorea...
- Background
Atzeko planoa
- Transparency
Gardentasuna
- Item ID
Elementuaren IDa
- Id
Id
@@ -17293,18 +17214,18 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Etiketaren kolorea aldatu da
- Insert expression
Txertatu adierazpena
- Label alignment changed
Etiketaren lerrokatzea aldatu da
@@ -17410,8 +17331,9 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
QgsComposerLegend
+ Legend
- Legenda
+ Legenda
@@ -17576,12 +17498,12 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Legenda-multzoa gehitu da
- Map %1
%1 mapa
- None
Bat ere ez
@@ -18011,107 +17933,100 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
QgsComposerMap
- Map %1
%1 mapa
- Map will be printed here
Mapa hemen inprimatuko da
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache-a
- Render
Errendatu
- Rectangle
Laukizuzena
- Solid
Solidoa
- Cross
Gurutzea
- Markers
-
-
- Decimal
Dezimala
- DegreeMinute
GraduakMinutuak
- DegreeMinuteSecond
GraduakMinutuakSegundoak
+ No frame
- Markorik ez
+ Markorik ez
- Zebra
Zebra
- Map scale changed
Mapa-eskala aldatu da
- Map rotation changed
Mapa-biraketa aldatu da
- Map extent changed
Mapa-hedadura aldatu da
- Select font color
Hautatu letra-tipoaren kolorea
@@ -18127,235 +18042,164 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Hautatu sareta-markoaren betegarriaren kolorea
- Canvas items toggled
Oihaleko elementuak txandakatu dira
- None
Bat ere ez
- Overview frame style changed
Ikuspegi orokorraren markoaren estiloa aldatu da
- Overview centering mode changed
Ikuspegi orokorraren zentratze-modua aldatu da
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Mapa-unitatea
-
-
- Millimeter
- Milimetroa
-
-
- Centimeter
-
-
- change...
- aldatu...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Saretaren kontrol-laukia txandakatu da
- Grid interval changed
Sareta-tartea aldatu da
- Grid offset changed
Sareta-desplazamendua aldatu da
- Grid line style changed
Sareta-lerroen estiloa aldatu da
- Grid type changed
Sareta-mota aldatu da
+ Grid cross width changed
- Sareta-gurutzeen zabalera aldatu da
+ Sareta-gurutzeen zabalera aldatu da
- Annotation font changed
Oharpenen letra-tipoa aldatu da
+ Label font changed
- Etiketaren testu-tipoa aldatu da
+ Etiketaren testu-tipoa aldatu da
- Annotation distance changed
Oharpenen distantzia aldatu da
- Annotation format changed
Oharpenen formatua aldatu da
- Annotation toggled
Oharpenak txandakatu dira
- Changed annotation precision
Oharpenen doitasuna aldatu da
- Changed grid frame style
Sareta-markoaren estiloa aldatu da
+ Changed grid frame width
- Sareta-markoaren zabalera aldatu da
+ Sareta-markoaren zabalera aldatu da
- Changed grid frame line thickness
Sareta-markoaren lerroaren lodiera aldatu da
- Grid frame color changed
Sareta-markoaren kolorea aldatu da
- Grid frame first fill color changed
Sareta-markoaren betegarriaren kolore nagusia aldatu da
- Grid frame second fill color changed
Sareta-markoaren betegarriaren bigarren kolorea aldatu da
- Inside frame
Markoaren barruan
- Outside frame
Markoaren kanpoan
- Disabled
Desgaitua
- Horizontal
Horizontala
- Vertical
Bertikala
- Annotation position changed
Oharpenen posizioa aldatu da
- Changed annotation direction
Oharpenen norabidea aldatu da
- Map %1
%1. mapa
@@ -18368,377 +18212,287 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Mapa-aukerak
- Map
Mapa
- Main properties
Propietate nagusiak
- Update preview
Eguneratu aurrebista
- Scale
Eskala
- Map rotation
Maparen biraketa
- Draw map canvas items
Marraztu mapa-oihalaren elementuak
- Lock layers for map item
Blokeatu mapa-elementuaren geruzak
- Extents
Hedadura
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
Ezarri mapa oihal-hedadurara
- X min
X min
- View extent in map canvas
Ikusi hedadura mapa-oihalean
- Controlled by atlas
Atlasak kontrolatutakoa
- Margin around feature
Marjina elementuaren inguruan
- %
%
- Fixed scale
Eskala finkoa
- Use one of the predefined scales of the project where the atlas feature best fits.
Erabili proiektuan aurredefinitutako eskaletako bat, atlasari ondoen doitzen zaiona.
- Predefined scale (best fit)
Aurredefinitutako eskala (doitze onena)
+ Show grid
- Erakutsi sareta
+ Erakutsi sareta
+ Grid &type
- Sareta-&mota
+ Sareta-&mota
- Offset
Desplazamendua
- mm
mm
- Blend mode
Nahaste-modua
- Interval
Tartea
- Grid frame
Sareta-markoa
- Frame size
Markoaren tamaina
- Frame line thickness
Markoaren lerroaren lodiera
- Color...
Kolorea...
- Frame fill colors
Markoaren betegarri-koloreak
- Marker style
- Markatzaile-estiloa
-
-
- Overview blending mode
Nahaste-moduaren ikuspegi orokorra
- Invert overview
Alderantzikatu ikuspegi orokorra
- Center on overview
Zentratu ikuspegi orokorrean
- X
X
- °
°
- Y
Y
- Cross width
Gurutze-zabalera
- Frame style
Marko-estiloa
- Line style
Lerro-estiloa
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Sareta-mota
-
-
- CRS
-
-
- change...
aldatu...
- Interval units
-
-
- Map unit
- Mapa-unitatea
-
-
- Millimeter
- Milimetroa
-
-
- Centimeter
-
-
- No frame
- Markorik ez
-
-
- Zebra
- Zebra
-
-
- Draw coordinates
Marraztu koordenatuak
- Format
Formatua
- Left
Ezkerra
- Right
Eskuina
- Top
Goia
- Bottom
Behea
- Font
Letra-tipoa
- Font...
Letra-tipoa...
- Font color
- Letra-tipoaren kolorea
-
-
- Distance to map frame
Distantzia mapa-markoa
- Coordinate precision
Koordenatu-doitasuna
- Font color...
Letra-tipoaren kolorea...
- Overview
Ikuspegi orokorra
- Overview frame
Ikuspegi orokorraren markoa
- Overview style
Ikuspegi orokorraren estiloa
- Change...
Aldatu...
@@ -18779,18 +18533,18 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
QgsComposerPicture
- Picture expression parsing error: %1
Errorea irudi-adierazpena analizatzean: %1
- Composer
Konposatzailea
- Picture expression eval error: %1
Errorea irudi-adierazpena ebaluatzean: %1
@@ -18805,64 +18559,64 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Picture changed
Irudia aldatu da
- Expression based image path
Adierazpenean oinarritutako irudi-bidea
- Picture rotation changed
Irudiaren biraketa aldatu da
- Select new preview directory
Hautatu aurrebista-direktorio berria
- Picture resize mode changed
Irudiaren tamaina aldatzeko modua aldatu da
- Picture placement changed
Irudiaren kokapena aldatu da
- Picture source changed
Irudiaren iturburua aldatu da
- Picture source expression
Irudiaren sorburuaren adierazpena
- Rotation synchronisation toggled
Biraketaren sinkronizazioa txandakatu da
- Rotation map changed
Biraketa-mapa aldatu da
- Map %1
%1. mapa
- Creating icon for file %1
Ikonoa sortzen %1 fitxategirako
@@ -19029,32 +18783,32 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
QgsComposerScaleBar
- units
unitateak
- km
km
- m
m
- miles
milia
- ft
oin
- Nm
itsas milia
@@ -19063,38 +18817,38 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
QgsComposerScaleBarWidget
Single Box
Kutxa bakarrekoa
Double Box
Kutxa bikoitzekoa
Line Ticks Middle
Lerro-markak erdian
Line Ticks Down
Lerro-markak behera
Line Ticks Up
Lerro-markak gora
Numeric
Zenbakizkoa
@@ -19134,144 +18888,119 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Itsas miliak
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Hautatu letra-tipoaren kolorea
-
-
- Select stroke color
-
-
- Map %1
%1. mapa
- Scalebar map changed
Eskala-barraren mapa aldatu da
- Scalebar line width
Eskala-barraren lerro-zabalera
- Scalebar segment size
Eskala-barraren segmentu-tamaina
- Scalebar segments left
Eskala-barraren segmentuak ezkerrean
- Number of scalebar segments changed
Eskala-barraren segmentu-kopurua aldatu da
- Scalebar height changed
Eskala-barraren altuera aldatu da
- Scalebar font changed
Eskala-barraren letra-tipoa aldatu da
- Scalebar font color changed
Eskala-barraren letra-tipoaren kolorea aldatu da
- Scalebar color changed
Eskala-barraren kolorea aldatu da
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Eskala-barraren trazuaren kolorea aldatu da
- Scalebar unit text
Eskala-barraren unitate-testua
- Scalebar map units per segment
Eskala-barraren mapa-unitateak segmentuko
- Scalebar style changed
Eskala-barraren estiloa aldatu da
- Scalebar label bar space
Eskala-barraren etiketa-barraren tartea
- Scalebar box content space
Eskala-barraren kutxaren edukiaren tartea
- Scalebar alignment
Eskala-barraren lerrokatzea
- Scalebar changed to map units
Eskala-barra mapa-unitateetara aldatu da
- Scalebar changed to feet
Eskala-barra oinetara aldatu da
- Scalebar changed to nautical miles
Eskala-barra itsas milietara aldatu da
- Scalebar changed to meters
Eskala-barra metroetara aldatu da
- Scalebar line join style
Eskala-barraren lerroaren elkartze-estiloa
- Scalebar line cap style
Eskala-barraren lerroaren estalki-estiloa
@@ -19414,11 +19143,6 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Secondary fill color...
-
-
- Stroke color...
Trazu-kolorea...
@@ -19428,37 +19152,37 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Ellipse
Elipsea
Rectangle
Laukizuzena
Triangle
Hirukia
- Shape style changed
Formaren estiloa aldatu da
- Shape radius changed
Formaren erradioa aldatu da
- Shape type changed
Forma-mota aldatu da
@@ -19869,107 +19593,107 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
QgsComposition
- Label added
Etiketa gehitu da
- Map added
Mapa gehitu da
- Arrow added
Gezia gehitu da
- Scale bar added
Eskala-barra gehitu da
- Shape added
Forma gehitu da
- Picture added
Irudia gehitu da
- Legend added
Legenda gehitu da
- Table added
Taula gehitu da
- Aligned items left
Elementuak ezkerrean lerrokatu dira
- Aligned items horizontal center
Elementuak erdian horizontalean lerrokatu dira
- Aligned items vertical center
Elementuak erdian bertikalean lerrokatu dira
- Aligned items right
Elementuak eskuinean lerrokatu dira
- Aligned items top
Elementuak goian lerrokatu dira
- Aligned items bottom
Elementuak behean lerrokatu dira
- Items locked
Elementuak blokeatu dira
- Items unlocked
Elementuak desblokeatu dira
- Item z-order changed
Elementuaren z-ordena aldatu da
- Remove item group
Kendu elementu-taldea
- Frame deleted
Markoa ezabatu da
- Item deleted
Elementua ezabatu da
- Multiframe removed
Marko anitz ezabatu dira
@@ -20026,148 +19750,148 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Landscape
Horizontala
Portrait
Bertikala
Map %1
%1 mapa
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
AEBetako legal (8.5x14 hazbete)
- ANSI A (Letter; 8.5x11 in)
ANSI A (gutuna; 8.5x11 hazbete)
- ANSI B (Tabloid; 11x17 in)
ANSI B (tabloidea; 11x17 hazbete)
- ANSI C (17x22 in)
ANSI C (17x22 hazbete)
- ANSI D (22x34 in)
ANSI D (22x34 hazbete)
- ANSI E (34x44 in)
ANSI E (34x44 hazbete)
- Arch A (9x12 in)
Arch A (9x12 hazbete)
- Arch B (12x18 in)
Arch B (12x18 hazbete)
- Arch C (18x24 in)
Arch C (18x24 hazbete)
- Arch D (24x36 in)
Arch D (24x36 hazbete)
- Arch E (36x48 in)
Arch E (36x48 hazbete)
- Arch E1 (30x42 in)
Arch E1 (30x42 hazbete)
- Custom
Pertsonalizatua
@@ -20185,131 +19909,109 @@ Saiatu bereizmen txikiagoarekin edo paper-tamaina txikiagoarekin
Papera eta kalitatea
- Presets
Aurrezarpenak
- ...
- ...
-
-
- Width
Zabalera
- Height
Altuera
- Units
Unitateak
- Number of pages
Orri-kopurua
- Orientation
Orientazioa
- Export resolution
Esportazio-bereizmena
- Print as raster
Inprimatu raster gisa
-
- Snap tolerance
- Atxikitze-tolerantzia
-
-
- px
- px
-
Change...
Aldatu...
- Page background
Orrialdearen atzeko planoa
+ Grid
- Sareta
+ Sareta
- dpi
dpi
- World file on
Mundu-fitxategia aktibatuta
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Sareta-desplazamendua
- x:
x:
- y:
y:
+ Spacing
- Tartea
+ Tartea
+ Snap to alignments
- Doitu lerrokatzeetara
+ Doitu lerrokatzeetara
+ Tolerance
- Tolerantzia
+ Tolerantzia
@@ -21245,7 +20947,7 @@ existitzen den CRSa
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23223,7 +22925,7 @@ Leave empty to automatically apply the maximum value.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Ezin izan da '%1' zutabea aurrebista-zutabe gisa ezarri. Analisi-errorea: %2
@@ -23550,7 +23252,7 @@ Parser error:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23563,7 +23265,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24665,7 +24367,7 @@ MyForms.py funtzioak PYTHONPATH-en, .qgis/python-en, edo proiektuaren karpetan e
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -25978,7 +25680,7 @@ Please reselect a valid file.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26930,17 +26632,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Ikurra
- Value
Balioa
- Label
Etiketa
@@ -27033,41 +26735,41 @@ p, li { white-space: pre-wrap; }
Aurreratua
- Symbol levels...
Ikur-mailak...
- Error
Errorea
- There are no available color ramps. You can add them in Style Manager.
Ez dago kolore-maldarik. Estilo-kudeatzailean gehitu dezakezu bat.
- The selected color ramp is not available.
Hautatutako kolore-malda ez dago eskuragarri.
- Warning
Abisua
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
Eten naturalen sailkapenak (Jenks) O(n2) konplexutasuna dauka, zure sailkapenak denbora luzea behar dezake.
Sakatu Utzi etenen kalkulua uzteko edo Ados jarraitzeko.
- Renderer creation has failed.
Errendatzaile-sorrerak huts egin du.
@@ -27251,10 +26953,7 @@ Sakatu Utzi etenen kalkulua uzteko edo Ados jarraitzeko.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Seguru zaude hautatutako %n geruza ezabatu nahi duzula?
- Seguru zaude hautatutako %n geruza ezabatu nahi d(it)uzula?
-
+ Seguru zaude hautatutako %n geruza ezabatu nahi duzula? Seguru zaude hautatutako %n geruza ezabatu nahi d(it)uzula?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29010,7 +28709,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29049,7 +28748,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29123,7 +28822,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29889,10 +29588,7 @@ at line %2 column %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Oraindik kudeatu gabeko %n geruza daude, eta galdu egingo dira orain ixten baduzu.
-
+ Oraindik kudeatu gabeko %n geruza daude, eta galdu egingo dira orain ixten baduzu.
@@ -30022,11 +29718,8 @@ at line %2 column %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Sarea denbora-mugaz kanpo geratu da %n segundoz inaktibo egon ondoren.
-Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.
-
+ Sarea denbora-mugaz kanpo geratu da %n segundoz inaktibo egon ondoren.
+Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.
@@ -31221,7 +30914,7 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.Geruza-etiketatzearen ezarpenak
- Label this layer with
Etiketatu geruza datu hauekin
@@ -31301,22 +30994,22 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.
...
...
@@ -31372,7 +31065,7 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.Lerro anitz
- Automated placement settings (apply to all layers)
Kokapen automatikoko ezarpenak (geruza guztietan aplikatzen da)
@@ -31402,7 +31095,7 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.
Rendering
Errendatzea
@@ -31490,7 +31183,7 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.
Alignment
Lerrokatzea
@@ -31527,7 +31220,7 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.Errepikatu
- Discourage labels from covering features
Saihestu etiketek elementuak estal ditzaten
@@ -31622,82 +31315,82 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.Bufferra
- Labels will not show if larger than this on screen
Etiketak ez dira erakutsiko pantailan hau baino handiagoak badira
- px
px
- Data defined
Datuek definitutakoa
- X
X
- Y
Y
- Coordinate
Koordenatua
- Preserve data rotation values
Mantendu datu-biraketaren balioak
- horizontal
horizontala
- vertical
bertikala
- Label options
Etiketa-aukerak
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
< 0 balioak 1:1etik hurbilago dagoen eskala bat irudikatzen du, adib. -10 = 10:1<br>0 balioak muga espezifikoa desgaitzen du.
- Maximum
Maximoa
- Pixel size-based visibility (labels in map units)
Pixel-tamainan oinarritutako ikusgaitasuna (etiketak mapa-unitateetan)
- Labels will not show if smaller than this on screen
Etiketak ez dira erakutsiko pantailan hau baino txikiagoak badira
- Minimum
Minimoa
@@ -31707,7 +31400,7 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.<
- Scale-based visibility
Eskalaren araberako ikusgaitasuna
@@ -31745,17 +31438,17 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.Alderantzizko norabidea
- Priority
Lehentasuna
- Low
Baxua
- High
Altua
@@ -31908,7 +31601,7 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.
Rotation
Biraketa
@@ -31960,17 +31653,17 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.Distantzia
- outside
kanpoan
- inside
barruan
- Maximum angle between curved characters
Karaktere kurbatuen arteko angelu maximoa
@@ -32076,62 +31769,62 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.ikur-unitateak
- Merge connected lines to avoid duplicate labels
Fusionatu konektatutako lerroak etiketa bikoiztuak saihesteko
- Label every part of multi-part features
Etiketatu zati anitzeko elementuen zati guztiak
- Feature options
Elementu-aukerak
- Suppress labeling of features smaller than
Ez etiketatu hurrengoa baino txikiagoak diren elementuak
- mm
mm
- Show all labels for this layer (including colliding labels)
Erakutsi geruza honetako etiketa guztiak (baita talka egiten dutenak ere)
- Show upside-down labels
Erakutsi buruz beherako etiketak
- never
inoiz ez
- when rotation defined
biraketa definitutakoan
- always
beti
- Limit number of features to be labeled to
Mugatu etiketatuko den elementu-kopurua
- Number of features sent to labeling engine, though not all may be labeled
Etiketatze-motorrera bidalitatu elementu-kopurua, nahiz eta agian denak ez diren etiketatuko
@@ -32141,17 +31834,17 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.Posizioa
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Kendu marka etiketatze-motorrak ezarritako biraketa idazteko finkatzean, eta NULL askatzean
- Always show
Erakutsi beti
- Show label
Erakutsi etiketa
@@ -32167,12 +31860,12 @@ Zure sare-konexioaren arazo bat izan daiteke, edo WMS zerbitzariarena.
QgsLayerTreeModel
- Double-click to view legend
Klik bi aldiz legenda ikusteko
- following %1 items
not displayed
hurrengo %1 elementu
@@ -32230,12 +31923,12 @@ ez dira erakusten
QgsLegendModel
- Group
Taldea
- No Legend Available
Ez dago legendarik eskuragarri
@@ -32463,18 +32156,18 @@ ez dira erakusten
QgsMapCanvas
- canvas
oihala
- Rendering
Errendatzen
- Canvas refresh: %1 ms
Oihalaren freskatzea: %1 ms
@@ -33658,10 +33351,7 @@ ez dira erakusten
%n more
unread messages
-
- %n gehiago
-
+ %n gehiago
@@ -33797,14 +33487,14 @@ ez dira erakusten
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Konexioak huts egin du - Ostalari-izena ez da adierazi.
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Konexioak huts egin du - Datu-basearen izena ez da adierazi.
@@ -35352,10 +35042,7 @@ Errore-informazio hedatua:
Coordinate Reference System (%n available)
crs count
-
- Koordenatuen erreferentzia-sistema (%n eskuragarri)
-
+ Koordenatuen erreferentzia-sistema (%n eskuragarri)
Solid
Solidoa
Dots
Puntuak
Crosses
Gurutzeak
- Detected active locale on your system: %1
Zure sisteman detektatutako hizkuntza: %1
- To vertex
Erpinera
- To segment
Segmentura
- To vertex and segment
Erpinera eta segmentura
- map units
mapa-unitateak
- pixels
pixelak
- Semi transparent circle
Zirkulu erdi gardena
- Cross
Gurutzea
- None
Bat ere ez
- QGIS files
QGIS fitxategiak
- Off
Desaktibatuta
- QGIS
QGIS
- GEOS
GEOS
- Round
Borobildua
- Mitre
Angelua
- Bevel
Alaka
- Save default project
Gorde proiektu lehenetsia
- You must set a default project
Proiektu lehenetsia ezarri behar duzu
- Current project saved as default
Uneko proiektua lehenetsi gisa gorde da
- Error saving current project as default
Errorea uneko proiektua lehenetsi gisa gordetzean
- Choose a directory to store project template files
Hautatu direktorio bat proiektuaren txantiloi-fitxategiak gordetzeko
@@ -36482,105 +36169,105 @@ Beti sarea: kargatu beti saretik eta ez begiratu cache-ak baliozko sarrerarik du
Erakutsi mapan iku daitezkeen elementuak
- Choose project file to open at launch
Hautatu proiektu-fitxategia abioan irekitzeko
- Create Options - %1 Driver
Sortze-aukerak - %1 kontrolagailua
- Create Options - pyramids
Sorttze-aukerak - piramideak
- Restore UI defaults
Leheneratu interfazearen lehenespenak
- Are you sure to reset the UI to default (needs restart)?
Seguru zaude interfazea balio lehenetsietara berrezarri nahi duzula? (derrigorrezkoa da berrabiaraztea)
- Overwrite
Gainidatzi
- If Undefined
Definitu gabea bada
- Unset
Kendu ezarpena
- Prepend
Erantsi aurrean
- Append
Erantsi atzean
- Choose a directory
Hautatu direktorio bat
- Enter scale
Sartu eskala
- Scale denominator
Eskala-izendatzailea
- Load scales
Kargatu eskalak
- XML files (*.xml *.XML)
XML fitxategiak (*.xml *.XML)
- Save scales
Gorde eskalak
- No Stretch
Ez luzatu
- Stretch To MinMax
Luzatu minimo/maximora
- Stretch And Clip To MinMax
Luzatu eta moztu minimo/maximora
- Clip To MinMax
Moztu minimo/maximora
@@ -36600,7 +36287,7 @@ Beti sarea: kargatu beti saretik eta ez begiratu cache-ak baliozko sarrerarik du
General
Orokorra
@@ -36783,7 +36470,7 @@ Beti sarea: kargatu beti saretik eta ez begiratu cache-ak baliozko sarrerarik du
...
...
@@ -36899,7 +36586,7 @@ Beti sarea: kargatu beti saretik eta ez begiratu cache-ak baliozko sarrerarik du
Remove
Kendu
@@ -36907,7 +36594,7 @@ Beti sarea: kargatu beti saretik eta ez begiratu cache-ak baliozko sarrerarik du
Add
Gehitu
@@ -37167,22 +36854,7 @@ Beti sarea: kargatu beti saretik eta ez begiratu cache-ak baliozko sarrerarik du
Lerroen / trazuen zabalera minimoa milimetroetan.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Ez erakutsi atributuen formularioa elementuak sortzean
@@ -37479,18 +37151,22 @@ Beti sarea: kargatu beti saretik eta ez begiratu cache-ak baliozko sarrerarik du
Kolorea...
+ Grid defaults
- Saretaren balio lehenetsiak
+ Saretaren balio lehenetsiak
+ Spacing
- Tartea
+ Tartea
mm
.mm
@@ -37511,370 +37187,372 @@ Beti sarea: kargatu beti saretik eta ez begiratu cache-ak baliozko sarrerarik du
Snap tolerance
Atxikitze-tolerantzia
+ Guide defaults
- Gidaren balio lehenetsiak
+ Gidaren balio lehenetsiak
- Feature creation
Elementu geografikoen sorrera
- Validate geometries
Balidatu geometriak
- Reuse last entered attribute values
Berrerabili azken aldian sartutako atributu-balioak
- Rubberband
Goma
- Line color
Lerro-kolorea
- Line width in pixels
Lerro-zabalera pixeletan
- Line width
Lerro-zabalera
- Snapping
Atxikitzea
- Default snap mode
Atxikitze-modu lehenetsia
- Default snapping tolerance
Atxikitze-tolerantzia lehenetsia
- Search radius for vertex edits
Bilaketa-erradioa erpinen ediziorako
- map units
mapa-unitateak
pixels
pixelak
- Open snapping options in a dock window (QGIS restart required)
Ireki atxikitze-aukerak leiho atrakatu batean (QGIS berrabiarazi behar da)
- Vertex markers
Erpin-markatzaileak
- Marker style
Markatzaile-estiloa
- Marker size
Markatzaile-tamaina
- Show markers only for selected features
Erakutsi markatzaileak hautatutako elementuetarako soilik
- Curve offset tool
Kurba-desplazamenduaren tresna
- Miter limit
Angelu-muga
- Join style
Elkartze-estiloa
- Quadrant segments
Koadrante-segmentuak
- GDAL driver options
GDAL kontrolagailuaren aukerak
- Edit Pyramids Options
Editatu piramide-aukerak
- Edit Create Options
Editatu sortze-aukerak
- GDAL drivers
GDAL kontrolagailuak
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
Zenbait kasutan GDAL kontrolagailu bat baino gehiago erabil daiteke raster-formatu bera kargatzeko. Erabili beheko zerrenda zein erabili zehazteko.
- Name
Izena
- ext
ext
- Flags
Banderak
- Description
Deskribapena
- CRS for new layers
Geruza berrietarako CRSa
- Select...
Hautatu...
- Use &project CRS
Erabili &proiektuaren CRSa
- Prompt for &CRS
Galdetu &CRSa
- Use default CRS displa&yed below
Erabili behean erakutsitako CRS &lehenetsia
- When a new layer is created, or when a layer is loaded that has no CRS
Geruza berria sortzen denean, edo CRSrik ez duen geruza bat kargatzen denean
- Default CRS for new projects
CRS lehenetsia proiektu berrietarako
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Gaitu automatikoki birproiekzio dinamikoa geruza gehitu berri baten CRSa jadanik kargatuta dauden geruzen CRSaren desberdina bada. Jadanik badauden geruz(ar)en CRSa erabiliko da.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Gaitu automatikoki birproiekzio dinamikoa geruzek CRS ezberdinak badituzte
- Always start new projects with this CRS
Beti hasi proiektu berriak CRS honekin
- Enable 'on the &fly' reprojection by default
Gaitu birproiekzio dinamikoa modu lehenetsian
- Don't enable 'on the fly' reprojection
Ez gaitu birproiekzio dinamikoa
- Default datum transformations
Datum-transformazio lehenetsiak
- Source CRS
Sorburu-CRSa
- Destination CRS
Helburu-CRSa
- Source datum transform
Sorburuko datum-transformazioa
- Destination datum transform
Helburuko datum-transformazioa
- Ask for datum transformation when no default is defined
Eskatu datum-transformazioa balio lehenetsirik definitu ez denean
- Override system locale
Gainidatzi sistemaren hizkuntza
- Locale to use instead
Haren ordez erabiliko den hizkuntza
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Oharra:</b> Hizkuntza gainidazteko aukera gaitzeko / aldatzeko, aplikazioa berrabiarazi behar da
- Additional Info
Informazio gehiago
- Detected active locale on your system:
Zure sisteman detektatutako hizkuntza aktiboa:
- WMS search address
WMS bilaketa-helbidea
- Timeout for network requests (ms)
Denbora-muga sare-eskarietarako (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Iraungitze-tarte lehenetsia WMS-C/WMTS lauzetarako (orduak)
- Max retry in case of tile request errors
Saialdi-kopuru maximoa lauzak eskatzean erroreak daudenean
- User-Agent
Erabiltzaile-agentea
- Cache settings
Cache-ezarpenak
- Directory
Direktorioa
- Size [KiB]
Tamaina [KiB]
- Clear
Garbitu
- Use proxy for web access
Erabili proxy-a web-sarbiderako
- Host
Ostalaria
- Port
Ataka
- User
Erabiltzailea
- Leave this blank if no proxy username / password are required
Utzi hutsik proxy-aren erabiltzaile-izenik / pasahitzik behar ez bada
- Password
Pasahitza
- Proxy type
Proxy-mota
- Exclude URLs (starting with)
Baztertu URLak (honela hasten direnak)
@@ -39850,7 +39528,7 @@ Errorea: %2
Plugina desagertu egin da
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
Badirudi plugina instalatu dela, baina ez dakit non. Agian plugin-paketeak izen okerreko direktorio bat zuen. Egin bilaketa bat instalatutako pluginen zerrendan, ia seguru nago plugina hor aurkituko duzula, baina ezin dut zehaztu haietako zein den. Honek esan nahi du, baita ere, ezingo dudala zehaztu plugin hau instalatuta dagoen ala ez eta haren eguneraketen berri eman. Hala ere, pluginak beharbada funtzionatuko du. Jarri harremanetan pluginaren egilearekin eta jakinarazi iezaiozu auzi hau.
@@ -40572,7 +40250,7 @@ QGIS berrabiarazi behar duzu hura birkargatzeko.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40590,7 +40268,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40608,7 +40286,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41468,156 +41146,156 @@ Hautatu ezikustea falta diren geruzarik gabe kargatzen jarraitzeko. Hautatu uzte
QgsProjectProperties
- Layer
Geruza
- Type
Mota
- Identifiable
Identifikagarria
- Vector
Bektoriala
- WMS
WMS
- Raster
Rasterra
- Coordinate System Restriction
Koordenatu-sistemaren muga
- No coordinate systems selected. Disabling restriction.
Ez dago koordenatu-sistemarik hautatu. Desgaitzen muga.
- Selection color
Hautapen-kolorea
- Measure tool (CRS transformation: %1)
Neurketa-tresna (CRS transformazioa: %1)
- Canvas units (CRS transformation: %1)
Oihal-unitateak (CRS transformazioa: %1)
+ OFF
Desaktibatuta
+ ON
Aktibatuta
- CRS %1 was already selected
%1 CRSa jadanik hautatuta dago
- Coordinate System Restrictions
Koordenatu-sistemaren mugak
- The current selection of coordinate systems will be lost.
Proceed?
Koordenatu-sistemaren uneko hautapena galduko da.
Jarraitu?
- Select print composer
Hautatu inprimatze-konposatzailea
- Composer Title
Konposatzaile-izenburua
- Select restricted layers and groups
Hautatu geruza eta talde mugatuak
- Enter scale
Sartu eskala
- Scale denominator
Eskala-izendatzailea
- Load scales
Kargatu eskalak
- XML files (*.xml *.XML)
XML fitxategiak (*.xml, *.XML)
- Save scales
Gorde eskalak
- Select a valid symbol
Hautatu baliozko ikur bat
- Invalid symbol :
Baliogabeko ikurra :
- Parameters:
Parametroak:
+ Select %1 from pull-down menu to adjust radii
Hautatu %1 menutik erradioak doitzeko
- Can only use ellipsoidal calculations when CRS transformation is enabled
Kalkulu elipsoidalak soilik erabil daitezke CRS transformazioa gaituta dagoenean
@@ -41642,7 +41320,6 @@ Jarraitu?
Project title
Proiektu-izenburua
@@ -41682,37 +41359,37 @@ Jarraitu?
Gorde bideak
- Measure tool
Neurtze-tresna
- Semi-minor
Ardatzerdi txikia
- Semi-major
Ardatzerdi handia
- Used when CRS transformation is turned off
CRS transformazioa desgaituta dagoenean erabilia
- Canvas units
Oihal-unitateak
- Meters
Metroak
- Feet
Oinak
@@ -41744,98 +41421,98 @@ Jarraitu?
OWS zerbitzaria
- Ellipsoid
(for distance calculations)
Elipsoidea
(distantzien kalkulurako)
- Degree
Graduak
- Degree display
Gradu-bistaratzea
- Decimal degrees
Gradu dezimalak
- Degrees, Minutes
Graduak, Minutuak
- Degrees, Minutes, Seconds
Graduak, Minutuak, Segundoak
- Precision
Zehaztasuna
- Automatically sets the number of decimal places in the mouse position display
Automatikoki ezartzen ditu saguaren posizio-bistaratzearen dezimal-kopurua
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Saguaren posizioa bistaratzeko erabiltzen den dezimal-kopurua automatikoki ezartzen da, sagua pixel bat mugitzean posizioaren bistaratzea ere alda dadin.
- Automatic
Automatikoa
- Sets the number of decimal places to use for the mouse position display
Saguaren posizio-bistaratzearen dezimal-kopurua ezartzen du
- Manual
Eskuz
- The number of decimal places for the manual option
Dezimal-kopurua eskuzko aukeratik
- decimal places
dezimal-kopurua
- Project scales
Proiektu-eskalak
- ...
...
- Enable 'on the fly' CRS transformation
Gaitu CRS transformazio dinamikoa
@@ -41845,69 +41522,69 @@ Jarraitu?
Geruza identifikagarriak
- Project layers
Proiektu-geruzak
- Layer
Geruza
- Type
Mota
- Identifiable
Identifikagarria
- Marker
Markatzailea
- Line
Lerroa
- Default symbols
Ikur lehenetsiak
- Fill
Betegarria
- Color Ramp
Kolore-malda
- Transparency
Gardentasuna
- %
%
- Style Manager
Estilo-kudeatzailea
- Options
Aukerak
@@ -41917,170 +41594,165 @@ Jarraitu?
Erlazioak
- Project file
- Proiektu-fitxategia
-
-
- Nautical miles
Itsas miliak
- Assign random colors to symbols
Esleitu ausazko koloreak ikurrei
- Service capabilities
Zerbitzu-kapazitateak
- Person
Pertsona
- Title
Kargua
- Organization
Erakundea
- Online resource
Lineako baliabidea
- E-Mail
Posta elektronikoa
- Phone
Telefonoa
- Abstract
Laburpena
- Fees
Oinak
- Access constraints
Sarbide-mugak
- Keyword list
Gako-hitzen zerrenda
- WMS capabilities
WMS kapazitateak
- Add geometry to feature response
Gehitu geometria elementuaren erantzunera
- Min. X
X min.
- Min. Y
Y min.
- Max. X
X max.
- Max. Y
Y max.
- Use Current Canvas Extent
Erabili uneko oihal-hedadura
- Used
Erabilia
- Exclude composers
Baztertu konposatzaileak
- WFS capabilities
WFS kapazitateak
- WCS capabilities
WCS kapazitateak
- Exclude layers
Baztertu geruzak
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
JPEG irudien kalitatea ( 10 : irudi txikiagoa - 100 : kalitate onena )
- Published
Argitaratua
- Update
Eguneratu
- Insert
Txertatu
- Delete
Ezabatu
- Unselect all
Desautatu dena
- Select all
Hautatu dena
@@ -42091,39 +41763,39 @@ Jarraitu?
Makroak
- Advertised URL
Iragarritako URLa
- Width
Zabalera
- Height
Altuera
- Maximums for GetMap request
Maximoak GetMap eskarirako
- Advertised extent
Iragarritako hedadura
- CRS restrictions
CRS mugak
- Python macros
Python makroak
@@ -42237,10 +41909,7 @@ Honen ondorioz, proiekzio-hautatzaileak ez du funtzionatuko...
The where clause returned %n row(s).
returned test rows
-
- Where sententziak %n errenkada itzuli d(it)u.
-
+ Where sententziak %n errenkada itzuli d(it)u.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42314,7 +41983,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42325,7 +41994,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42341,7 +42010,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -44007,7 +43676,7 @@ Klik laguntza-botoian formatu honetarako sorrera-aukera baliozkoak ezagutzeko.<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45016,7 +44685,7 @@ desbiderapen estandarra ×
(no selection)
- (hautapenik ez)
+
Filter returned %n feature(s)
number of filtered features
-
- Iragazkiak %n elementu itzuli ditu
-
+ Iragazkiak %n elementu itzuli ditu
@@ -45778,10 +45444,7 @@ desbiderapen estandarra ×
Found %n matching feature(s).
test result
-
- Bat datozen %n elementu aurkitu d(ir)a.
-
+ Bat datozen %n elementu aurkitu d(ir)a.
Validation finished (%n error(s) found).
number of geometry errors
-
- Balidazioa amaitu da (%n errore aurkitu d(ir)a).
-
+ Balidazioa amaitu da (%n errore aurkitu d(ir)a).
%n selected geometries
selected geometries
-
- Hautatutako %n geometria
-
+ Hautatutako %n geometria
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47335,7 +46992,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47948,8 +47605,8 @@ Gainidatzi [%2] erlazioa?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47986,123 +47643,151 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Ezin izan da interfazea kargatu
+ Ezin izan da interfazea kargatu
+ Failed to connect to database
- Ezin izan da datu-basearekin konektatu
+ Ezin izan da datu-basearekin konektatu
+ A connection to the SQL Anywhere database cannot be established.
- Ezin da sortu SQL Anywhere datu-baserako konexioa.
+ Ezin da sortu SQL Anywhere datu-baserako konexioa.
+ No suitable key column
- Ez dago gako-zutabe egokirik
+ Ez dago gako-zutabe egokirik
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- %1 iturri-erlazioak ez dauka gako bakar gisa erabiltzeko moduko zutabe egokirik.
+ %1 iturri-erlazioak ez dauka gako bakar gisa erabiltzeko moduko zutabe egokirik.
QGISek beharrezko du erlazioak 32 bit baino handiagoa izango ez den balio osoen zutabe bat, balio bakarrak dituena, eduki dezan.
+ Error loading attributes
- Errorea atributuak kargatzean
+ Errorea atributuak kargatzean
+ Ambiguous field!
- Eremu nahasgarria!
+ Eremu nahasgarria!
+ Duplicate field %1 found
- %1 eremu bikoiztua aurkitu da
+ %1 eremu bikoiztua aurkitu da
+ Read attempt on an invalid SqlAnywhere data source
- Irakurtzeko saialdia SQLAnywhere datu-iturri baliogabe batean
+ Irakurtzeko saialdia SQLAnywhere datu-iturri baliogabe batean
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Errorea elementuak txertatzean
+ Errorea elementuak txertatzean
+ Error deleting features
- Errorea elementuak ezabatzean
+ Errorea elementuak ezabatzean
+ Error adding attributes
- Errorea elementuak gehitzean
+ Errorea elementuak gehitzean
+ Error deleting attributes
- Errorea atributuak ezabatzean
+ Errorea atributuak ezabatzean
+ Attribute not found
- Ez da atributua aurkitu
+ Ez da atributua aurkitu
+ Error updating attributes
- Errorea atributuak eguneratzean
+ Errorea atributuak eguneratzean
+ Error updating features
- Errorea elementuak eguneratzean
+ Errorea elementuak eguneratzean
+ Error verifying geometry column %1
- Errorea %1 geometria-zutabea egiaztatzean
+ Errorea %1 geometria-zutabea egiaztatzean
+ Unknown geometry type
- Geometria-mota ezezaguna
+ Geometria-mota ezezaguna
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- %1 zutabeak QGISek oraindik onartzen ez duen %2 motako geometria du.
+ %1 zutabeak QGISek oraindik onartzen ez duen %2 motako geometria du.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- %1 zutabea ez dago SRID bakarrera mugatuta, eta hori derrigorrezkoa da QGISentzat.
+ %1 zutabea ez dago SRID bakarrera mugatuta, eta hori derrigorrezkoa da QGISentzat.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- QGISek datu lauak soilik onartzen dituenez, SQL Anywhere datu-hornitzaileak datuak proiekzio lau bateragarrira transformatuko ditu (SRID=%1).
+ QGISek datu lauak soilik onartzen dituenez, SQL Anywhere datu-hornitzaileak datuak proiekzio lau bateragarrira transformatuko ditu (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- QGISek datu lauak soilik onartzen dituenez eta ez denez proiekzio lau bateragarririk aurkitu, SQL Anywhere datu-hornitzaileak datuak WGS 84 proiekzio laura transformatzen saiatuko da (SRID=%1).
+ QGISek datu lauak soilik onartzen dituenez eta ez denez proiekzio lau bateragarririk aurkitu, SQL Anywhere datu-hornitzaileak datuak WGS 84 proiekzio laura transformatzen saiatuko da (SRID=%1).
+ Mixed Spatial Reference Systems
- Erreferentzia-sistema espazial nahasiak
+ Erreferentzia-sistema espazial nahasiak
+ Error checking database ReadOnly property
- Errorea datu-basearen ReadOnly propietatea egiaztatzean
+ Errorea datu-basearen ReadOnly propietatea egiaztatzean
+ Error loading SRS definition
- Errorea SRS definizioa kargatzean
+ Errorea SRS definizioa kargatzean
+ Limited Support of Round Earth SRS
- Round Earth SRSen euskarri mugatua
+ Round Earth SRSen euskarri mugatua
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- %1 zutabeak (%2) lurrazal borobil baten erreferentzia-sistema espaziala (SRID=%3) jarraitzen duten geometriak ditu. %4
+ %1 zutabeak (%2) lurrazal borobil baten erreferentzia-sistema espaziala (SRID=%3) jarraitzen duten geometriak ditu. %4
Geometria-balioen eguneraketak desgaitu egingo dira, eta kontsulten performantzia txarra izango da, ez baitira indize espaziala erabiliko. Performantzia hobetzeko, ideia ona izan daiteke geometria horien proiekzio laua dituen zutabe (agian kalkulatu) berri baten gaineko indize espaziala sortzea. Laguntza gehiagorako, begiratu SQL Anywhere-n dokumentazioko ST_SRID(INT) and ST_Transform(INT) metodoaren deskribapena.
@@ -48237,13 +47922,13 @@ Geometria-balioen eguneraketak desgaitu egingo dira, eta kontsulten performantzi
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Jadanik badago '%1' izena duen ikurra. Gainidatzi?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Jadanik badago '%1' izena duen kolore-malda.
Gainidatzi?
@@ -49374,7 +49059,7 @@ Arazo bat dago zure ikurren datu-basearekin.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50150,37 +49835,25 @@ Errorea honakoa da: %2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- ARRAKASTA: %n atributu ezabatu d(ir)a.
-
+ ARRAKASTA: %n atributu ezabatu d(ir)a.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- ERROREA: %n atributu ez d(ir)a ezabatu.
-
+ ERROREA: %n atributu ez d(ir)a ezabatu.
SUCCESS: %n attribute(s) added.
added attributes count
-
- ARRAKASTA: %n atributu gehitu d(ir)a.
-
+ ARRAKASTA: %n atributu gehitu d(ir)a.
ERROR: %n new attribute(s) not added
not added attributes count
-
- ERROREA: %n atributu berri ez d(ir)a gehitu.
-
+ ERROREA: %n atributu berri ez d(ir)a gehitu.
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- ARRAKASTA: %n atributuren balioa(k) aldatu d(ir)a.
-
+ ARRAKASTA: %n atributuren balioa(k) aldatu d(ir)a.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- ERROREA: %n atributuren balio-aldaketa(k) ez d(ir)a aplikatu.
-
+ ERROREA: %n atributuren balio-aldaketa(k) ez d(ir)a aplikatu.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- ARRAKASTA: %n elementu ezabatu dira
-
+ ARRAKASTA: %n elementu ezabatu dira
ERROR: %n feature(s) not deleted.
not deleted features count
-
- ERROREA: %n elementu ez dira ezabatu.
-
+ ERROREA: %n elementu ez dira ezabatu.
SUCCESS: %n feature(s) added.
added features count
-
- ARRAKASTA: %n elementu gehitu dira.
-
+ ARRAKASTA: %n elementu gehitu dira.
ERROR: %n feature(s) not added.
not added features count
-
- ERROREA: %n elementu ez dira gehitu.
-
+ ERROREA: %n elementu ez dira gehitu.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- ERROREA: %n elementu ez dira gehitu - hornitzaileak ez du onartzen elementuak gehitzea.
-
+ ERROREA: %n elementu ez dira gehitu - hornitzaileak ez du onartzen elementuak gehitzea.
SUCCESS: %n geometries were changed.
changed geometries count
-
- ARRAKASTA: %n geometria aldatu dira.
-
+ ARRAKASTA: %n geometria aldatu dira.
ERROR: %n geometries not changed.
not changed geometries count
-
- ERROREA: %n geometria ez dira aldatu.
-
+ ERROREA: %n geometria ez dira aldatu.
Options (%n coordinate reference systems available)
crs count
-
- Aukerak (koordenatuen %n erreferentzia-sistema eskuragarri)
-
+ Aukerak (koordenatuen %n erreferentzia-sistema eskuragarri)
Coordinate Reference System (%n available)
crs count
-
- Koordenatuen erreferentzia-sistema (%n eskuragarri)
-
+ Koordenatuen erreferentzia-sistema (%n eskuragarri)
%n Layer(s) selected
selected layer count
-
- %n geruza hautatu d(ir)a
-
+ %n geruza hautatu d(ir)a
(and %n more)
crs
-
- (eta %n gehiago)
-
+ (eta %n gehiago)
%n tile requests in background
tile request count
-
- %n lauza-eskari atzeko planoan
-
+ %n lauza-eskari atzeko planoan
, %n cache hits
tile cache hits
-
- , %n cache-atzialdi
-
+ , %n cache-atzialdi
, %n cache misses.
tile cache missed
-
- , %n cache-galera.
-
+ , %n cache-galera.
, %n errors.
errors
-
- , %n errore.
-
+ , %n errore.
(and %n more)
crs
-
- (eta %n gehiago)
-
+ (eta %n gehiago)
%n missing row(s)
-
- galdutako %n lerro
-
+ galdutako %n lerro
%n missing column(s)
-
- galdutako %n zutabe
-
+ galdutako %n zutabe
%n tile requests in background
tile request count
-
- %n lauza-eskari atzeko planoan
-
+ %n lauza-eskari atzeko planoan
, %n cache hits
tile cache hits
-
- , %n cache-atzialdi
-
+ , %n cache-atzialdi
, %n cache misses.
tile cache missed
-
- , %n cache-galera.
-
+ , %n cache-galera.
, %n errors.
errors
-
- , %n errore.
-
+ , %n errore.
SaDbTableModel
+ Schema
- Eskema
+ Eskema
+ Table
- Taula
+ Taula
+ Type
- Mota
+ Mota
+ SRID
- SRIDa
+ SRIDa
+ Line Interpretation
- Lerro-interpretazioa
+ Lerro-interpretazioa
+ Geometry column
- Geometria-zutabea
+ Geometria-zutabea
+ Sql
- SQL
+ SQL
SaNewConnection
+ Save connection
- Gorde konexioa
+ Gorde konexioa
+ Should the existing connection %1 be overwritten?
- Jadanik existitzen den %1 konexioa gainidatzi?
+ Jadanik existitzen den %1 konexioa gainidatzi?
+ Failed to load interface
- Ezin izan da interfazea kargatu
+ Ezin izan da interfazea kargatu
+ Test connection
- Probatu konexioa
+ Probatu konexioa
+ Connection to %1 was successful
- Konexioa %1(e)kin ongi egin da
+ Konexioa %1(e)kin ongi egin da
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Konexioak huts egin du - Egiaztatu ezarpenak eta saiatu berriro.
+ Konexioak huts egin du - Egiaztatu ezarpenak eta saiatu berriro.
SQL Anywhere errore-kodea: %1
Deskribapena: %2
@@ -53578,276 +53193,348 @@ Deskribapena: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Sortu SQL Anywhere konexio berria
+ Sortu SQL Anywhere konexio berria
+ Connection Information
- Konexio-informazioa
+ Konexio-informazioa
+ Name
- Izena
+ Izena
+ Host
- Ostalaria
+ Ostalaria
+ Port
- Ataka
+ Ataka
+ Server
- Zerbitzaria
+ Zerbitzaria
+ Database
- Datu-basea
+ Datu-basea
+ Connection Parameters
- Konexio-parametroak
+ Konexio-parametroak
+ Username
- Erabiltzaile-izena
+ Erabiltzaile-izena
+ Password
- Pasahitza
+ Pasahitza
+ Name of the new connection
- Konexio berriaren izena
+ Konexio berriaren izena
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- datu-basearen zerbitzaria ostatatzen duen ordenagailuaren izena edo IP helbidea (utzi hutsik konexio lokaletarako)
+ datu-basearen zerbitzaria ostatatzen duen ordenagailuaren izena edo IP helbidea (utzi hutsik konexio lokaletarako)
+ Port number used by the database server (leave blank for default 2638)
- Datu-basearen zerbitzariak erabilitako ataka-zenbakia (utzi hutxik 2638 balio lehenetsia erabiltzeko)
+ Datu-basearen zerbitzariak erabilitako ataka-zenbakia (utzi hutxik 2638 balio lehenetsia erabiltzeko)
+ Name of the database server (leave blank for default server on host)
- Datu-base zerbitzariaren izena (utzi hutsik ostalariaren zerbitzari lehenetsia erabiltzeko)
+ Datu-base zerbitzariaren izena (utzi hutsik ostalariaren zerbitzari lehenetsia erabiltzeko)
+ Name of the database (leave blank for default database on server)
- Datu-basearen izena (utzi hutsik zerbitzari datu-base lehentsia erabiltzeko)
+ Datu-basearen izena (utzi hutsik zerbitzari datu-base lehentsia erabiltzeko)
+ Additional connection parameters
- Konexio-parametro gehigarriak
+ Konexio-parametro gehigarriak
+ Database username
- Datu-basearen erabiltzaile-izena
+ Datu-basearen erabiltzaile-izena
+ Database password
- Datu-basearen pasahitza
+ Datu-basearen pasahitza
+ Save the connection username in the registry
- Gorde konexioaren erabiltzaile-izena erregistroan
+ Gorde konexioaren erabiltzaile-izena erregistroan
+ Save Username
- Gorde erabiltzaile-izena
+ Gorde erabiltzaile-izena
+ &Test Connect
- &Probatu konexioa
+ &Probatu konexioa
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Gorde konexioaren pasahitza erregistroan (ABISUA: EZ DA SEGURUA)
+ Gorde konexioaren pasahitza erregistroan (ABISUA: EZ DA SEGURUA)
+ Save Password
- Gorde pasahitza
+ Gorde pasahitza
+ Encrypt packets using simple encryption
- Zifratu paketeak zifratxe sinplea erabiliz
+ Zifratu paketeak zifratxe sinplea erabiliz
+ Simple Encryption
- Zifratze sinplea
+ Zifratze sinplea
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Zenbatespenak erabiltzen ditu geruzaren zenbait propietateetarako, esaterako kardinalitatea, hedadura, etab. (performantzia hobetzen du)
+ Zenbatespenak erabiltzen ditu geruzaren zenbait propietateetarako, esaterako kardinalitatea, hedadura, etab. (performantzia hobetzen du)
+ Estimate table metadata
- Zenbatetsi taularen metadatuak
+ Zenbatetsi taularen metadatuak
+ Search for geometry columns in tables owned by other users
- BIlatu geometria-zutabeak beste jabe batzuk dituzten tauletan
+ BIlatu geometria-zutabeak beste jabe batzuk dituzten tauletan
+ Search other users' tables
- Bilatu beste erabiltzaileen tauletan
+ Bilatu beste erabiltzaileen tauletan
SaSourceSelect
+ &Add
- &Gehitu
+ &Gehitu
+ &Set Filter
- &Ezarri iragazkia
+ &Ezarri iragazkia
+ Wildcard
- Komodina
+ Komodina
+ RegExp
- RegExp
+ RegExp
+ All
- Dena
+ Dena
+ Schema
- Eskema
+ Eskema
+ Table
- Taula
+ Taula
+ Type
- Mota
+ Mota
+ SRID
- SRIDa
+ SRIDa
+ Line Interpretation
- Lerro-interpretazioa
+ Lerro-interpretazioa
+ Geometry column
- Geometria-zutabea
+ Geometria-zutabea
+ Sql
- SQL
+ SQL
+ Are you sure you want to remove the %1 connection and all associated settings?
- Seguru zaude %1 konexioa eta hari lotutako ezarpen guztiak kendu nahi dituzula?
+ Seguru zaude %1 konexioa eta hari lotutako ezarpen guztiak kendu nahi dituzula?
+ Confirm Delete
- Baieztatu ezabaketa
+ Baieztatu ezabaketa
+ Select Table
- Hautatu taula
+ Hautatu taula
+ You must select a table in order to add a layer.
- Taula bat hautatu behar duzu geruza bat gehitzeko.
+ Taula bat hautatu behar duzu geruza bat gehitzeko.
+ Failed to load interface
- Ezin izan da interfazea kargatu
+ Ezin izan da interfazea kargatu
+ Connection failed
- Konexioak huts egin du
+ Konexioak huts egin du
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- %1 datu-basearen konexioak huts egin du - Egiaztatu ezarpenak eta saiatu berriro.
+ %1 datu-basearen konexioak huts egin du - Egiaztatu ezarpenak eta saiatu berriro.
SQL Anywhere errore-kodea: %2
Deskribapena: %3
+ No accessible tables found
- Ez da taula atzigarririk aurkitu
+ Ez da taula atzigarririk aurkitu
+ Database connection was successful, but no tables containing geometry columns were %1.
- Datu-basearen konexioa ongi egin da, baina geometria-zutabeak dituzten taulak %1 dira.
+ Datu-basearen konexioa ongi egin da, baina geometria-zutabeak dituzten taulak %1 dira.
+ found
- aurkitua
+ aurkitua
+ found in your schema
- zure eskeman aurkitua
+ zure eskeman aurkitua
SaSourceSelectBase
+ Add SQL Anywhere layer
- Gehitu SQL Anywhere geruza
+ Gehitu SQL Anywhere geruza
+ SQL Anywhere Connections
- SQL Anywhere konexioak
+ SQL Anywhere konexioak
+ Delete
- Ezabatu
+ Ezabatu
+ Edit
- Editatu
+ Editatu
+ New
- Berria
+ Berria
+ Connect
- Konektatu
+ Konektatu
+ Search options
- Bilaketa-aukerak
+ Bilaketa-aukerak
+ Search
- Bilatu
+ Bilatu
+ Search mode
- Bilaketa-modua
+ Bilaketa-modua
+ Search in columns
- Bilatu zutabeetan
+ Bilatu zutabeetan
SaveAsPythonScriptAction
I/O error
- I/O errorea
+ I/O errorea
Unable to save edits. Reason:
%s
- Ezin dira edizioak gorde. Arrazoia:
+ Ezin dira edizioak gorde. Arrazoia:
%s
@@ -54182,20 +53869,24 @@ Deskribapena: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Gehitu SQL Anywhere geruza...
+ Gehitu SQL Anywhere geruza...
+ Store vector layers within a SQL Anywhere database
- Geruza bektorialak SQL Anywhere datu-basean gordetzen ditu
+ Geruza bektorialak SQL Anywhere datu-basean gordetzen ditu
+ Invalid Layer
- Baliogabeko geruza
+ Baliogabeko geruza
+ %1 is an invalid layer and cannot be loaded.
- %1 geruza baliogabea da eta ezin da kargatu.
+ %1 geruza baliogabea da eta ezin da kargatu.
@@ -55533,7 +55224,7 @@ Exekutatu topologia-egiaztatzailea berriro.
context_help
- <h3>Database connection</h3>
<h3>Datu-basearen konexioa</h3>
@@ -55578,7 +55269,7 @@ On this tab you can search for WMS servers. It is possible to enter a search-str
To visualize the results, select an table entry, press the <label>Add selected row to WMS list</label> button and change back to the <label>Servers</label> tab.<p>
You only need to request the list of layers by clicking the <label>Connect</label> button.
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55667,7 +55358,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55677,7 +55368,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -57389,7 +57158,7 @@ Laguntzarako, bidali mezu bat scala@itc.cnr.it helbidera
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -58156,7 +57925,7 @@ Plugina ez da gaituko.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -58172,15 +57941,15 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -58205,15 +57974,15 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
-
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -58227,13 +57996,13 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
-
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -58243,7 +58012,7 @@ This group contains functions for manipulating colors
Talde honek kolorea manipulatzeko funtzioak ditu
- <h3>length() function</h3>
Returns the length of a string.
@@ -58256,12 +58025,12 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
-
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -58274,14 +58043,14 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -58291,13 +58060,13 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -58311,13 +58080,13 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
-
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -58331,10 +58100,10 @@ Note: This function is only available in some contexts and will be 0 otherwise.
-
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -58350,12 +58119,12 @@ Rounds a number upwards.
<code>ceil(4.9) → 5</code><br>
<code>ceil(-4.9) → -4</code><br>
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -58366,12 +58135,12 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
-
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -58384,10 +58153,10 @@ Retrieves a x coordinate of the current feature
<h4>Example</h4>
<pre>xat(1) → 5</pre>
-
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -58401,17 +58170,17 @@ None
<pre>$numpages → 42</pre>
-
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -58420,13 +58189,13 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
-
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -58444,10 +58213,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>rand(1, 10) → 8</code><br>
-
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -58464,10 +58233,10 @@ None
<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -58483,10 +58252,10 @@ None
<pre>$atlasfeatureid = $id</pre>
-
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -58500,10 +58269,10 @@ geom → a geometry
<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -58519,10 +58288,10 @@ Rounds a number downwards.
<code>floor(4.9) → 4</code><br>
<code>floor(-4.9) → -5</code><br>
-
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -58536,12 +58305,12 @@ geom → a geometry
<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -58552,12 +58321,12 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
-
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -58570,10 +58339,10 @@ Retrieves a y coordinate of the current feature
<h4>Example</h4>
<pre>yat(1) → 5</pre>
-
- <h3>tostring() function</h3>
Converts a number to string.
@@ -58586,12 +58355,12 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
-
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -58605,10 +58374,10 @@ None
<pre>$rownum → 4711</pre>
-
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -58625,10 +58394,10 @@ arguments to determine the quadrant of the result
<p><h4>Example</h4>
atan2(1.0, 1.732) → 0.523611477769969</p>
-
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -58657,7 +58426,7 @@ Angelu baten sinua itzultzen du.
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -58673,12 +58442,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -58714,20 +58483,20 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -58736,10 +58505,10 @@ Convert a string into Qt data type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todate('2012-05-04') → 2012-05-04</code><br>
-
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -58756,12 +58525,12 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -58775,24 +58544,24 @@ Returns arcuscosinus of a value in radians.
<p><h4>Example</h4>
acos(0.5) → 1.0471975511966</p>
-
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
-
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -58810,10 +58579,10 @@ This function takes two arguments.
<code>log(2, 32) → 5</code><br>
<code>log(0.5, 32) → -5</code><br>
-
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -58821,21 +58590,21 @@ This group contains functions that operate on geometry objects e.g length, area.
Talde honek geometria-objektuak erabiltzen dituen funtzioak ditu, adibidez luzera, azalera.
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
-
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -58849,10 +58618,10 @@ None
<pre>$page → 2</pre>
-
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -58866,10 +58635,10 @@ Returns exponential of an value.
<p><h4>Example</h4>
exp(1.0) → 2.71828182845905</p>
-
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -58886,13 +58655,13 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -58914,10 +58683,10 @@ use <code>round(decimal)</code> to round to the nearest integer<b
-
- <h3>$now function</h3>
Returns the current date and time
@@ -58931,10 +58700,10 @@ None
<pre>$now → 2012-07-22T13:24:57</pre>
-
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -58949,12 +58718,12 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
-
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -58967,8 +58736,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -58984,10 +58753,10 @@ accelerating as the input values approach the domain maximum. Smaller exponents
-
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -58999,12 +58768,12 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -59016,12 +58785,12 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59035,10 +58804,10 @@ geom → a geometry
<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59052,10 +58821,10 @@ geom → a geometry
<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59069,10 +58838,10 @@ geom → a geometry
<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -59084,13 +58853,13 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -59105,13 +58874,13 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -59127,12 +58896,12 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
-
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -59149,12 +58918,12 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
-
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -59166,12 +58935,12 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -59181,22 +58950,22 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
may not give the expected results if you move your Quantum project.
</p>
-
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -59207,18 +58976,18 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -59233,12 +59002,12 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
-
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -59249,14 +59018,14 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -59267,14 +59036,14 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
-
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59288,10 +59057,10 @@ geom → a geometry
<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -59302,13 +59071,13 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -59316,7 +59085,7 @@ This group contains functions for handling date and time data.
Talde honek ordua eta egunak maneiatzeko funtzioak ditu.
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -59328,15 +59097,15 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -59346,13 +59115,13 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -59373,10 +59142,10 @@ Restricts an input value to a specified range.
-
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -59388,13 +59157,13 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -59405,13 +59174,13 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -59426,46 +59195,10 @@ b → distance for the buffer
<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -59479,13 +59212,13 @@ None
<pre>$id → 42</pre>
-
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -59497,28 +59230,10 @@ None
<h4>Example</h4>
<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -59530,13 +59245,13 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -59549,10 +59264,10 @@ a → geometry
<h4>Example</h4>
<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -59564,13 +59279,13 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -59582,13 +59297,13 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -59603,10 +59318,10 @@ None
<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -59620,10 +59335,10 @@ None
<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -59638,10 +59353,10 @@ None
<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -59655,10 +59370,10 @@ b → geometry
<pre> centroid($geometry) → returns a point geometry</pre>
-
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -59670,13 +59385,13 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -59694,10 +59409,10 @@ $map → "canvas" (within the main QGIS main canvas)</pre>
-
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -59709,12 +59424,12 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -59726,12 +59441,12 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -59742,15 +59457,15 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -59762,12 +59477,12 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -59781,15 +59496,15 @@ None
<pre>$perimeter → 42</pre>
-
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -59798,10 +59513,10 @@ Converts a string to a interval type. Can be used to take days, hours, month, e
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -59817,16 +59532,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -59842,12 +59557,12 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -59860,22 +59575,22 @@ None
<h4>Example</h4>
<pre>$pi → 3.14159265358979</pre>
-
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
-
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -59884,10 +59599,10 @@ Convert a string into Qt time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>totime('12:30:01') → 12:30:01</code><br>
-
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -59902,19 +59617,19 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
-
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -59928,10 +59643,10 @@ abs(<i>value</i>)<br>
<h4>Example</h4>
<code>abs(-2) → 2</code><br>
-
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -59946,10 +59661,10 @@ Returns the largest value in a set of values.
<!-- Show example of function.-->
max(2,10.2,5.5) → 10.2
-
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -59963,17 +59678,17 @@ Returns square root of a value
<p><h4>Example</h4>
sqrt(9) → 3</p>
-
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
-
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -59991,12 +59706,12 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -60014,10 +59729,10 @@ to.
<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -60033,15 +59748,15 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -60066,14 +59781,14 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
-
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -60091,10 +59806,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60108,10 +59823,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -60132,10 +59847,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -60148,12 +59863,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -60169,16 +59884,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -60207,15 +59922,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -60232,17 +59947,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -60256,10 +59971,10 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -60267,7 +59982,7 @@ This group contains operators e.g + - *
Talde honek eragileak ditu, adib. + - *
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -60283,16 +59998,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -60306,10 +60021,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -60322,10 +60037,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -60339,12 +60054,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -60358,12 +60073,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -60378,17 +60093,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -60398,10 +60113,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -60416,12 +60131,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -60435,12 +60150,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -60454,10 +60169,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -60474,12 +60189,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -60493,17 +60208,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -60518,10 +60233,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -60532,12 +60247,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -60551,17 +60266,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -60574,12 +60289,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -60596,14 +60311,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -60617,15 +60332,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -60634,15 +60349,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -60673,14 +60388,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -60699,14 +60414,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -60811,12 +60526,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -60830,10 +60545,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -60847,10 +60562,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -60867,10 +60582,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -60886,9 +60601,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -63445,4 +63160,4 @@ Returns a string representation of a color based on its hue, saturation, value a
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_fa.ts b/i18n/qgis_fa.ts
index 372568b6b3c..caf566f0545 100644
--- a/i18n/qgis_fa.ts
+++ b/i18n/qgis_fa.ts
@@ -1,12 +1,10 @@
-
-
-
+
APIsDialogPythonConsole
Generating prepared API file (please wait)...
-
@@ -25,15 +23,15 @@
Setting
-
Value
-
Providers
- ارائه دهنده خدمات
+
Wrong value
@@ -50,7 +48,7 @@
ConnectionItem
Unable to connect
-
@@ -113,555 +111,555 @@
DBManager
Sorry
- متاسفیم
+
No database selected or you are not connected to it.
-
Select the table you want export to file.
-
DB Manager
-
Info
- اطلاعات
+
Table
- جدول
+
Preview
-
&Database
- &پایگاه دادهها
+
&Schema
-
&Table
-
&Refresh
-
&SQL window
-
&Exit
-
&Import layer/file
-
&Export to file
-
DBManagerPlugin
Sorry
- متاسفیم
+
Unable to find a valid unique field
-
Copy
- کپی
+
DB Manager
-
Server version:
-
Host:
-
User:
-
Library:
-
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
-
create new schemas
-
create temporary tables
-
Not connected
-
Connection details
-
General info
-
<warning> %s support not enabled!
-
<warning> This user has no privileges!
-
User has privileges:
-
Privileges
-
Owner:
-
Comment:
-
create new objects
-
access objects
-
Schema details
-
<warning> This user has no privileges to access this schema!
-
Relation type:
-
View
-
Table
- جدول
+
Rows:
-
Unknown (<a href="action:rows/count">find out</a>)
-
Name
- نام
+
Type
- نوع
+
Null
-
Default
- پیش فرض
+
Column(s)
-
Function
-
<warning> This is not a spatial table.
-
Fields
-
Constraints
- اضافه کردن محدودیت
+
Indexes
- شاخص
+
Triggers
-
View definition
-
Column:
-
Geometry:
-
Dimension:
-
Undefined
-
Spatial ref:
-
Estimated extent:
-
(unknown) (<a href="action:extent/get">find out</a>)
-
Extent:
-
<warning> There isn't entry in geometry_columns!
-
<warning> No spatial index defined (<a href="action:spatialindex/create">create it</a>)
-
Pages:
-
Rows (estimation):
-
Privileges:
-
<warning> This user doesn't have usage privileges for this schema!
-
Rows (counted):
-
<warning> This user has read-only privileges.
-
<warning> There's a significant difference between estimated and real row count. Consider running <a href="action:vacuumanalyze/run">VACUUM ANALYZE</a>.
-
<warning> No primary key defined for this table!
-
Scripts:
-
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
-
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
-
Length
- طول
+
Enabled
-
Yes
-
No
-
<a href="action:triggers/enable">Enable all triggers</a> / <a href="action:triggers/disable">Disable all triggers</a>
-
Definition
-
Rules
-
&Versioning
-
&Table
-
"{0}" not found
-
Filename:
-
SQLite version:
-
Error:
%s
-
Query:
%s
-
&Re-connect
-
&Database
- &پایگاه دادهها
+
&Create schema
-
&Schema
-
&Delete (empty) schema
-
Delete selected item
-
&Create table
-
&Edit table
-
&Delete table/view
-
&Empty table
-
&Move to schema
-
Cannot delete the selected item.
-
No database selected or you are not connected to it.
-
New schema
-
Enter new schema name
-
Select an empty SCHEMA for deletion.
-
hey!
-
Really delete schema %s?
-
Select a TABLE for editation.
-
Select a TABLE/VIEW for deletion.
-
Really delete table/view %s?
-
Select a TABLE to empty it.
-
Really delete all items from table %s?
-
Select a TABLE/VIEW.
-
Do you want to %s all triggers?
-
Table triggers
-
Do you want to %s trigger %s?
-
Table trigger
-
Do you want to %s spatial index for field %s?
-
Spatial Index
-
Check
-
Primary key
- کليد اصلي
+
Foreign key
-
Unique
- يکتا
+
Exclusion
-
Unknown
-
DBModel
Databases
-
Invalid layer
-
Unable to load the layer %s
-
DBTree
Rename
-
Delete
- حذف
+
Add to canvas
-
Re-connect
-
@@ -1024,12 +1022,12 @@ Query:
Store
-
Delete
- حذف
+
There were %d vertices in original dataset which
were reduced to %d vertices after simplification
-
Processing of the following layers/files ended with error:<br><br>
-
Join attributes by location
@@ -2090,9 +2088,9 @@ This may cause unexpected results.
طول فیلد
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
-
Split vector layer
@@ -2128,19 +2126,19 @@ This may cause unexpected results.
Can't delete file %s
-
Error loading output shapefile:
%s
-
Created output shapefile:
%s
Would you like to add the new layer to the TOC?
-
Please specify input vector layer
@@ -2153,7 +2151,7 @@ Would you like to add the new layer to the TOC?
Defined Projection For:
%s.shp
-
Random Points
@@ -2185,26 +2183,26 @@ Would you like to add the new layer to the TOC?
Selected features: %s
-
Commit error:
%s
-
Could not replace geometry of feature with id %s
-
Could not eliminate features with these ids:
%s
-
Created output shapefile:
%s
-
Line intersections
@@ -2234,7 +2232,7 @@ Would you like to add the new layer to the TOC?
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Distance matrix
@@ -2367,7 +2365,7 @@ Are you sure you want to proceed?
Please specify an input layer
- لطفا لایه ورودی را مشخص کنید
+
Simplify results
@@ -2390,47 +2388,24 @@ Are you sure you want to proceed?
حذف کردن از انتخاب قبلی
- Select by location
انتخاب برپایه مکان
- Select features in:
انتخاب موجودیت ها در :
- that intersect features in:
برخورد همه موجودیت ها در :
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- تغییر انتخاب جاری :
+ تغییر انتخاب جاری :
Use selected features only
- فقط استفاده از موجودیت های انتخاب شده
+ فقط استفاده از موجودیت های انتخاب شده
Please specify select layer
@@ -2461,11 +2436,11 @@ Are you sure you want to proceed?
DlgAddGeometryColumn
Sorry
- متاسفیم
+
field name must not be empty
- نام فیلد نباید خالی باشد
+
@@ -2473,32 +2448,32 @@ Are you sure you want to proceed?
Autofill settings
-
Autofill mode
-
Do not autofill
-
Fill with numbers
-
Fill with parameter values
-
Parameter to use
-
@@ -2506,7 +2481,7 @@ Are you sure you want to proceed?
Processing options
-
DlgCreateIndex
Error
- خطا
+
Please enter some name for the index
-
DlgCreateTable
&Create
-
Sorry
- متاسفیم
+
no field selected
-
field is at top already
-
No field selected
-
field is at bottom already
-
select schema!
-
enter table name!
-
add some fields!
-
set geometry column name
-
Good
-
everything went fine
-
DlgExportVector
Choose where to save the file
-
Shapefiles
-
Export to file
-
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
%s
-
Export finished.
-
DlgFieldProperties
Sorry
- متاسفیم
+
field name must not be empty
@@ -2632,12 +2607,12 @@ Are you sure you want to proceed?
Get scripts and models
-
about:blank
-
@@ -2675,36 +2650,36 @@ Are you sure you want to proceed?
DlgImportVector
Choose the file to import
-
Import to database
-
Input layer missing or not valid
-
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
%s
-
Import was successful.
- ورود موفق بود.
+
@@ -2712,12 +2687,12 @@ Are you sure you want to proceed?
Processing modeler
-
Open model
-
...
- ...
+
Save
-
Save as...
-
Export as image
-
Edit model help
-
Run model
-
Multiple selection
-
@@ -2793,17 +2768,17 @@ Are you sure you want to proceed?
Enter number or expression
-
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -2811,17 +2786,17 @@ Are you sure you want to proceed?
Dialog
- محاوره
+
Output
- خروجی
+
Style
- سبک
+
@@ -2842,12 +2817,12 @@ Are you sure you want to proceed?
Script editor
-
Save
-
...
- ...
+
Save as...
-
Edit script help
-
Run algorithm
-
Cut
-
Copy
- کپی
+
Paste
-
Undo
- خنثی کردن
+
Redo
- ازنو
+
DlgSqlWindow
%d rows, %.1f seconds
-
Sorry
@@ -2924,43 +2899,43 @@ geometry column - column with unique integer values
DlgTableProperties
Sorry
- متاسفیم
+
nothing selected
-
Are you sure
-
really delete column '%s'?
-
really delete constraint '%s'?
-
The selected table has no geometry
-
Create?
-
Create spatial index for field %s?
-
Nothing selected
-
really delete index '%s'?
-
@@ -3036,95 +3011,95 @@ geometry column - column with unique integer values
Field calculator
-
Create a new field
-
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
- دقت
+
Input layer
- انتخاب لایه
+
Update existing field
-
Output file
-
...
- ...
+
FieldsCalculatorDialog
[Save to temporary file]
-
Save file
- ذخیره فایل
+
Unable to execute algorithm
-
Wrong or missing parameter values
-
FileDirectorySelector
...
- ...
+
Select directory
-
Select file
-
All files (*.*)
-
@@ -3161,11 +3136,11 @@ geometry column - column with unique integer values
Unable to load {0} plugin.
The required "{1}" module is missing.
Install it and try again.
-
QGIS version detected:
-
This version of Gdal Tools requires at least QGIS version 1.0.0
@@ -3388,7 +3363,7 @@ Plugin will not be enabled.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">⏎
<html><head><meta name="qrichtext" content="1" /><style type="text/css">⏎
@@ -3423,12 +3398,12 @@ p, li { white-space: pre-wrap; }⏎
No input files to process.
-
The following files were not created:
{0}
-
@@ -3558,11 +3533,11 @@ Do you want terminate it anyway?
Output size or resolution required
-
The output file doesn't exist. You must set up the output size or resolution to create it.
-
Select the input file for Translate
@@ -3667,20 +3642,20 @@ Do you want terminate it anyway?
GDAL was unable to retrieve the extent from any file.
The "Use intersected extent" option will be unchecked.
-
Empty extent
- چهار چوب خالی
The computed extent is empty.
Disable the "Use intersected extent" option to have a nonempty output.
-
Select where to save the Merge output
-
Select the input directory with files to Merge
@@ -3688,7 +3663,7 @@ Disable the "Use intersected extent" option to have a nonempty output.
{0} not created.
-
Select the files to analyse
@@ -3696,15 +3671,15 @@ Disable the "Use intersected extent" option to have a nonempty output.
Select the input file for Contour
-
Select where to save the Contour output
-
Select the input file for Proximity
-
Warning
@@ -3712,7 +3687,7 @@ Disable the "Use intersected extent" option to have a nonempty output.
Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
-
Finished
@@ -3914,7 +3889,7 @@ when pressing on the tool dialog's Help button.
Recurse subdirectories
- جستجوی بازگشتی زیرفهرستها
+
Clipping mode
-
Create an output alpha band
-
I&nterval between contour lines
-
If not provided, no elevation attribute is attached.
-
ELEV
-
Convert RGB image to paletted
-
Batch mode (for processing whole directory)
- حالت پردازش دستهای(برای پردازش تمام فهرست)
+
Band to convert
-
DEM (Terrain models)
- DEM(مدل زمین)
+
&Input file (DEM raster)
-
&Band
-
Compute &edges
-
Use Zevenbergen&&Thorne formula (instead of the Horn's one)
-
&Mode
-
Hillshade
-
Slope
-
Aspect
-
Color relief
-
TRI (Terrain Ruggedness Index)
-
TPI (Topographic Position Index)
-
Roughness
-
Mode Options
-
Z factor (vertical exaggeration)
-
Scale (ratio of vert. units to horiz.)
-
Azimuth of the light
-
Altitude of the light
-
Slope expressed as percent (instead of as degrees)
-
Return trigonometric angle (instead of azimuth)
-
Return 0 for flat (instead of -9999)
-
Color configuration file
-
Matching mode
-
Exact color (otherwise "0,0,0,0" RGBA)
-
Nearest color
-
Add alpha channel
-
&Creation Options
-
Fill Nodata
-
&Input Layer
-
Output format
-
Search distance
-
Smooth iterations
-
Band to operate on
-
Validity mask
-
Do not use the default validity mask
-
Grid (Interpolation)
- شبکه(درونیابی)
+
&Z Field
-
&Algorithm
-
Inverse distance to a power
-
Moving average
-
Nearest neighbor
-
Data metrics
-
Power
-
Smoothing
-
Radius1
-
Radius2
-
Max points
-
Min points
-
Angle
- زاویه
+ زاویه
No data
- هیچ داده ای
Metrics
-
Range
-
Resize
- تغییر اندازه
Width
- عرض
+ عرض
Height
- ارتفاع
+ ارتفاع
Info
- اطلاعات
+ اطلاعات
Raster info
-
Suppress GCP printing
-
Suppress metadata printing
-
Merge
- ادغام
+
Layer stack
-
Use intersected extent
-
Grab pseudocolor table from the first image
-
Near Black
-
How &far from black (or white)
-
Search for nearly &white (255) pixels instead of black ones
-
Build overviews (Pyramids)
- ایجاد یک دید کلی(از نوع هرمی)
+
Remove all overviews.
-
Clean
-
Polygonize (Raster to vector)
- پلیگون(چند ضلعی) کردن(تبدیل رستر به بردار)
+
&Output file for polygons (shapefile)
-
&Field name
-
DN
-
Use mask
-
Assign projection
- تخصیص طرح نقشه
+
WARNING: current projection definition will be cleared
-
Desired SRS
-
Output will be:
- new GeoTiff if input file is not GeoTiff
- overwritten if input is GeoTiff
-
Select...
- انتخاب ...
+
Proximity (Raster distance)
- مجاورت(فاصله رستری)
+
&Values
-
&Dist units
-
GEO
-
PIXEL
-
&Max dist
-
&No data
-
&Fixed buf val
-
0
- 0
+
Rasterize (Vector to raster)
- رستری کردن(تبدیل بردار به تصویر)
+
&Input file (shapefile)
-
&Attribute field
-
&Output file for rasterized vectors (raster)
-
Keep existing raster size and resolution
-
Raster size in pixels
-
Raster resolution in map units per pixel
-
Horizontal
- افقی
+
Vertical
-
Sieve
- غربال کردن
+
&Threshold
-
&Pixel connections
-
4
- 4
+
8
- 8
+
Raster tile index
-
Tile index field
-
location
-
Write absolute path
-
Skip files with different projection ref
-
Translate (Convert format)
- تفسیر کردن(تبدیل فرمت)
+
&Target SRS
-
Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
-
Outsize
-
%
- %
+
Assign a specified nodata value to output bands.
-
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
-
Expand
-
Gray
-
RGB
-
RGBA
-
Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
-
Srcwin
-
Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
-
Prjwin
-
Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
-
Sds
-
Warp (Reproject)
- عمل Warp (دوباره تصویرکردن)
+
&Source SRS
-
&Resampling method
-
Cubic
-
Cubic spline
-
Lanczos
-
&Memory used for caching
-
MB
-
Use m&ultithreaded warping implementation
-
&Output directory for contour lines (shapefile)
-
@@ -4828,15 +4803,15 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Geometry
- هندسی
+
Please specify input vector layer
- لطفا لایه برداری را معین کنید
+
Please specify output shapefile
- لطفا فایل خروجی را معین کنید
+
Please specify valid tolerance value
@@ -4844,19 +4819,19 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Please specify valid UID field
-
Singleparts to multipart
-
Output shapefile
- خروجی shapefile
+
Multipart to singleparts
-
Extract nodes
@@ -4864,19 +4839,19 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Polygons to lines
-
Input polygon vector layer
- انتخاب لایه چندضلعی برداری
+
Export/Add geometry columns
-
Input vector layer
- ایجاد لایه برداری
+
Layer CRS
@@ -4888,43 +4863,43 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Ellipsoid
-
Polygon centroids
-
Output point shapefile
- مقصد خروجی فایل (shapefile)
+
Delaunay triangulation
-
Input point vector layer
- انتخاب لایه نقطهای برداری
+
Voronoi polygon
-
Buffer region
-
Lines to polygons
-
Input line vector layer
- انتخاب لایه خطی برداری
+
Polygon from layer extent
-
Input layer
@@ -4932,68 +4907,68 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Output polygon shapefile
-
Unable to delete existing shapefile.
-
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Cancel
- لغو
+
Error processing specified tolerance!
Please choose larger tolerance...
-
Unable to delete incomplete shapefile.
-
At least two features must have same attribute value!
Please choose another field...
-
One or more features in the output layer may have invalid geometry, please check using the check validity tool
-
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Layer '{0}' updated
-
Error writing output shapefile.
-
GeoprocessingDialog
Dissolve all
-
Geoprocessing
- پردازش جغرافیایی
+
Please specify an input layer
@@ -5001,7 +4976,7 @@ Please choose another field...
Please specify a difference/intersect/union layer
-
Please specify valid buffer value
@@ -5009,131 +4984,131 @@ Please choose another field...
Please specify dissolve field
-
Please specify output shapefile
- لطفا فایل خروجی را معین کنید
+
No features selected, please uncheck 'Use selected' or make a selection
-
Buffer(s)
-
Create single minimum convex hull
-
Create convex hulls based on input field
-
Convex hull(s)
-
Dissolve
-
Difference layer
-
Difference
-
Intersect layer
- برش لایه
+
Intersect
-
Clip layer
-
Clip
-
Union layer
-
Union
-
Unable to delete existing shapefile.
-
Cancel
- لغو
+
Close
- بستن
+
No output created. File creation error:
%s
-
Created output shapefile:
%s
%s%s
-
Error loading output shapefile:
%s
-
Warnings:
-
Symmetrical difference
-
Some output geometries may be missing or invalid.
Would you like to add the new layer anyway?
-
Input CRS error: Different input coordinate reference systems detected, results may not be as expected.
-
Input CRS error: One or more input layers missing coordinate reference information, results may not be as expected.
-
Feature geometry error: One or more output features ignored due to invalid geometry.
-
GEOS geoprocessing error: One or more input features have invalid geometry.
-
@@ -5141,32 +5116,32 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Launch Globe
-
Globe Settings
-
Unload Globe
-
Overlay data on a 3D globe
-
Settings for 3D globe
-
Unload globe
-
&Globe
-
@@ -5184,58 +5159,58 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Heatmap
- نقشه حرارتی
+
Creates a heatmap raster for the input point vector.
-
&Heatmap
-
GDAL driver error
-
Cannot open the driver for the specified format
-
Raster update error
-
Could not open the created raster for updating. The heatmap was not generated.
-
Creating heatmap
-
Abort
-
Heatmap generation aborted
-
QGIS will now load the partially-computed raster.
-
@@ -5243,37 +5218,37 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Save Heatmap as:
-
No valid layers found!
-
Advanced options cannot be enabled.
-
Invalid output filename
-
Please enter a valid output file path and name.
-
Layer not found
-
Layer %1 not found.
-
@@ -5281,129 +5256,129 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Heatmap Plugin
-
...
- ...
+
Input point layer
- انتخاب لایه نقطهای
+
Output raster
-
Output format
-
Radius
-
10
- 10
+
meters
- متر
+
map units
-
Rows
- سطر
+
Cell size X
-
Columns
-
Cell size Y
-
Use radius from field
-
Use weight from field
-
0.0
- 0.0
+
Decay ratio
-
Quartic (biweight)
-
Triangular
-
Uniform
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
Advanced
-
@@ -5417,23 +5392,23 @@ GEOS geoprocessing error: One or more input features have invalid geometry.HistoryDialog
Clear
- تمیز
+
Clear history and log
-
Confirmation
-
Are you sure you want to clear log?
-
Create test
-
@@ -5441,24 +5416,24 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Dialog
- محاوره
+
Reload
-
Save
-
InfoViewer
DB Manager
-
@@ -5482,7 +5457,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&ویرایش
@@ -5502,1117 +5477,1109 @@ GEOS geoprocessing error: One or more input features have invalid geometry.انتخاب
- Measure
اندازه گیری
- &Decorations
&دکوراسیون
- &Layer
&لایه
- New
جدید
- &Plugins
&پلاگین
- &Help
&راهنما
- &Settings
&تنظیمات
- &Raster
&تصویر
- Vect&or
-
- &OpenStreetMap
-
- File
پرونده
- Manage Layers
مدیریت لایهها
- Digitizing
دیجیتالی نمودن
- Advanced Digitizing
دیجیتالی نمودن پیشرفته
- Map Navigation
نقشه نوردی
- Attributes
خصوصیات
- Plugins
پلاگینها
- Help
راهنما
- Raster
رستر
- Label
بر چسب
- Vector
وکتور
- Database
پایگاه داده
- Web
وب
- Ctrl+N
-
- Ctrl+O
-
- Ctrl+S
-
- Ctrl+Shift+S
-
- Save as Image...
ذخیره به صورت تصویری...
- &New Print Composer
&ساختن پرینت جدید
- Ctrl+P
-
- Composer Manager...
مدیریت سازنده ...
P&roject
-
&Open Recent
-
New From Template
-
- Preview Mode
-
- Paste Features as
-
- &New
- &جدید
+
- &Open...
-
- &Save
-
- Save &As...
-
- Exit QGIS
-
- Ctrl+Q
- Ctrl+Q
+
- &Undo
&برگشت
- Ctrl+Z
- Ctrl+Z
+
- &Redo
&ازنو
- Ctrl+Shift+Z
- Ctrl+Shift+Z
+
- Cut Features
برش موجودیت
- Ctrl+X
-
- Copy Features
کپی موجودیت
- Ctrl+C
-
- Paste Features
چسباندن موجودیت
- Ctrl+V
-
- Add Feature
اضافه کردن موجودیت
- Ctrl+.
-
- Move Feature(s)
حرکت دادن موجودیت(ها)
- Reshape Features
تغییر شکل موجودیت
- Split Features
تقسیم موجودیتها
- Split Parts
-
- Delete Selected
حذف انتخاب شدهها
- Add Ring
اضافه کردن حلقه
- Add Part
اضافه کردن قسمت
- Simplify Feature
ساده سازی موجودیت
- Delete Ring
حذف حلقه
- Delete Part
حذف قسمت
- Merge Selected Features
ترکیب کردن موجودیت ها
- Merge Attributes of Selected Features
ترکیب خصوصیات موجودیتهای انتخاب شده
- Node Tool
ابزار گره
- Rotate Point Symbols
نچرخش نماد نقطه
- Snapping Options...
تنظیمات چسبیدن ...
- Pan Map
حرک دادن نقشه
- Zoom In
بزرگنمایی به داخل
- Ctrl++
-
- Zoom Out
بزرگنمایی به خارج
- Ctrl+-
-
+ Select Single Feature
- انتخاب یک موجودیت
+ انتخاب یک موجودیت
+ Select Features by Rectangle
- انتخاب موجودیتها با کشیدن مستطیل
+ انتخاب موجودیتها با کشیدن مستطیل
- Select Features by Polygon
انتخاب موجودیتها با کشیدن چند ضلعی
- Select Features by Freehand
انتخاب موجودیتها با کشیدن آزاد
- Select Features by Radius
انتخاب موجودیتها با کشیدن دایره
- Deselect Features from All Layers
حذف حالت انتخاب موجودیتها از تمامی لایهها
- Identify Features
شناسه موجودیت
- Ctrl+Shift+I
-
- Measure Line
اندازه گیری خطی
- Ctrl+Shift+M
-
- Measure Area
اندازه گیری مساحتی
- Ctrl+Shift+J
-
- Measure Angle
اندازه گیری زاویهای
- Zoom Full
نمایش همه
- Ctrl+Shift+F
-
- Zoom to Layer
نمایش لایه
- Zoom to Selection
نمایش موجودیتهای انتخاب شده
- Ctrl+J
-
- Zoom Last
نمایش حالت قبلی
- Zoom Next
نمایش حالت بعدی
- Zoom Actual Size
نمایش اندازه واقعی
- Zoom to Native Pixel Resolution
بزرگنمایی به رزولوشن پیکسل بومی
- Map Tips
نکات نقشه
- Show information about a feature when the mouse is hovered over it
نمایش اطلاعات درباره موجودیت در زمانی که موشواره بر روی ان قرار میگیرد
- New Bookmark...
نشانه جدید ...
- Ctrl+B
-
- Show Bookmarks
نمایش نشانهها
- Ctrl+Shift+B
-
- Refresh
به روز رسانی
- Text Annotation
حاشیه نویسی
- Form Annotation
حاشیه نویسی به صورت فرم
- Move Annotation
جا به جا کردن حاشیه
- Labeling
بر چسب زدن
- Layer Labeling Options
زاویه برچسب تغییر کرد
- New Shapefile Layer...
ایجاد یک فایل ترسیمی ...
- Ctrl+Shift+N
-
- New SpatiaLite Layer ...
ایجاد لایه SpatiaLite ...
- Ctrl+Shift+A
-
- Raster calculator ...
محاسبه گر تصویری ...
- Add Vector Layer...
اضافه کردن یک لایه برداری ...
- Ctrl+Shift+V
- Ctrl+Shift+V
+
- Add Raster Layer...
اضافه کردن یک لایه تصویری ...
- Ctrl+Shift+R
-
- Add PostGIS Layers...
اضافه کردن لایه PostGis ...
- Ctrl+Shift+D
-
- Add SpatiaLite Layer...
ایجاد لایه SpatiaLite ...
- Ctrl+Shift+L
-
- Add MSSQL Spatial Layer...
ایجاد لایه SpatiaLite ...
- Add Oracle Spatial Layer...
-
- Ctrl+Shift+O
-
- Add WMS/WMTS Layer...
-
- Ctrl+Shift+W
-
- Open Attribute Table
باز کردن جدول خصوصیات
- Toggle Editing
تعویض ویرایش
- Toggles the editing state of the current layer
تغییر حالت ویرایش لایه
- Save for Selected Layer(s)
ذخیره در لایه انتخاب شده
- Save edits to current layer, but continue editing
ذخیره تغییرات در لایه جاری و ادامه دادن به کار ویرایش
- Save As...
ذخیره به ...
- Add from Layer Definition File...
-
- Save As Layer Definition File...
-
- Normal
-
- Normal preview mode
-
- Simulate Photocopy (Grayscale)
-
- Simulate photocopy (grayscale)
-
- Simulate Fax (Mono)
-
- Simulate fax (mono)
-
- Simulate Color Blindness (Protanope)
-
- Simulate color blindness (protanope)
-
- Simulate Color Blindness (Deuteranope)
-
- Simulate color blindness (deuteranope)
-
- Set Scale Visibility of Layer(s)
-
- Remove Layer(s)
حذف لایه(ها)
- Ctrl+D
-
- Set CRS of Layer(s)
تغییر CRS از لایه ها
- Ctrl+Shift+C
- Ctrl+Shift+C
+
- Set Project CRS from Layer
تغییر CRS پروژه از لایه
- Properties...
خصوصیات ...
- Query...
جستجو ...
- Add to Overview
اضافه کردن به مرورگر کلی
- Add All to Overview
اضافه کردن همه به مرورگر کلی
- Remove All from Overview
حذف همه از نمای کلی
- Show All Layers
نمایش کل لایهها
- Ctrl+Shift+U
-
- Hide All Layers
پنهان کردن کل لایهها
- Ctrl+Shift+H
-
- Manage and Install Plugins...
-
- Open Field Calculator
-
- Add Delimited Text Layer...
-
- Add Delimited Text Layer
-
- New Vector Layer
-
- Paste features in clipboard into a new OGR vector layer.
-
- New Memory Vector Layer
-
- Paste features in clipboard into a new memory vector layer.
-
- Toggle Full Screen Mode
حالت تمام صفحه
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
- F5
+
- Ctrl+F
-
- F11
- F11
+
- Project Properties...
مشخصات پروژه ...
- Ctrl+Shift+P
-
- Options...
مشخصات ...
- Custom CRS...
سیستم مرجع مختصاتی ...
- Configure shortcuts...
پیکربندی کلیدهای میانبر ...
- Local Histogram Stretch
-
- Stretch histogram of active raster to view extents
-
- Help Contents
مفاد راهنما
- F1
- F1
+
- API documentation
مستندات API
- QGIS Home Page
صفحه وب QGIS
- Ctrl+H
-
- Check QGIS Version
چک نمودن نسخه
- Check if your QGIS version is up to date (requires internet access)
بررسی به روز بودن نسخه برنامه (نیاز به دسترسی اینترنت)
- About
درباره
- QGIS Sponsors
اسپانسر QGIS
- Move Label
جا به جا کردن بر چسب
- Rotate Label
چرخش بر چسب
- Rotate Label
Ctl (Cmd) increments by 15 deg.
کنترل (CMD) و افزایش تا 15 درجه .
- Change Label
تغییر بر چسب
- Style Manager...
مدیریت سبک نگارش ...
- Python Console
کنسول پایتون
- Full histogram stretch
کشش کامل هیستوگرام
- Stretch Histogram to Full Dataset
-
- Customization...
سفارشی ...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
میانبرهای تکراری در قسمت مدیریت سفارشی هستند و در آن مکان جلوگیری می شود از برخورد آنها
- Ctrl+M
-
- Embed Layers and Groups...
قراردادن لایه ها و گروه ...
- Embed layers and groups from other project files
قراردادن لایه ها و گروه ها از فایل های پروژه های دیگر
- &Copyright Label
&برچسب کپی رایت
- Creates a copyright label that is displayed on the map canvas.
ایجاد یک برچسب کپی رایت است که بر روی بوم نقشه نشان داده شده است.
- &North Arrow
&پیکان شمالی
- "Creates a north arrow that is displayed on the map canvas"
"ایجاد یک پیکان در شمال است که بر روی بوم نقشه نمایش داده شده"
- &Scale Bar
&نوار درجه
- Creates a scale bar that is displayed on the map canvas
ایجاد یک نوار در مقیاس است که بر روی بوم نقشه نمایش داده شده
- Add WFS Layer...
اضافه کردن لایه WFS ...
- Add WFS Layer
اضافه کردن لایه WFS
- Feature Action
اقدام ویژگی
- Run Feature Action
اجرای اقدام ویژگی
- Pan Map to Selection
حرکت نقشه به طرف انتخاب
- Touch zoom and pan
زوم لمسی و حرکت
- Offset Curve
افست منحنی
- Copy style
کپی پوسته
- Paste style
چسیاندن پوسته
- Add WCS Layer...
اضافه کردن لایه WCS ...
- &Grid
&جدول
- Grid
جدول
- Pin/Unpin Labels
برچسب پین / باز کردن
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6623,44 +6590,44 @@ Acts on all editable layers
اقدامات در همه لایه های قابل ویرایشحالت
- Highlight Pinned Labels
برچسب نماد پین شده
- New Blank Project
ایجاد پروژه جدید
- Local Cumulative Cut Stretch
برش تجمعی موقعیت کشش
- Local cumulative cut stretch using current extent, default limits and estimated values.
برش تجمعی با وسعت کنونی داده های موقعیت کششی ، محدودیت های پیش فرض و ارزش تخمین زده شده .
- Full Dataset Cumulative Cut Stretch
برش تجمعی کامل مجموعه داده های کشش شده
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
کشش برش تجمعی با وسعت داده ها، محدودیت پیش فرض و ارزش تخمین زده شده .
- Show/Hide Labels
نمایش / عدم نمایش برچسب ها
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6671,130 +6638,130 @@ Acts on currently active editable layer
اعمال روی لایه در حال حاضر فعال و قابل ویرایش
- Html Annotation
حاشیه نویسی اچ تی ام ال
- Duplicate Layer(s)
لایه های تکراری
- SVG annotation
-
- Save for All Layers
ذخیره تمامی لایه ها
- Rollback for All Layers
عقبگرد برای تمام لایه ها
- Cancel for All Layers
لغو کردن برای همه لایه ها
- Rollback for Selected Layer(s)
عقبگرد برای لایه انتخاب شده
- Current Edits
تغییرات کنونی
- Cancel for Selected Layer(s)
لغو برای لایه انتخاب شده
- Save Layer Edits
ذخیره تغییرات لایه
- Rotate Feature(s)
چرخش ویژگیها
- &Download data
&دانلود اطلاعات
- &Import topology from XML
-
- &Export topology to SpatiaLite
-
- Increase brightness
افزایش روشنایی
- Decrease brightness
کاهش روشنایی
- Increase contrast
افزایش کنتراست
- Decrease contrast
کاهش کنتراست
- Select By Expression
-
- Select features using an expression
-
- Need commercial support?
-
- DXF Export...
-
- Fill Ring
-
@@ -6802,76 +6769,76 @@ Acts on currently active editable layer
Manage connections
-
Save to file
- ذخیره در فایل
+
Browse
- جستجو
+
Load from file
- بارگذاری از فایل
+
Load
- بارگذاری
+
Save
-
eXtensible Markup Language (*.xml *.XML)
-
Save connections
-
Load connections
-
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
-
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -6879,411 +6846,411 @@ Acts on currently active editable layer
MetaSearch
-
Search
- جستجو
+
Find
-
Set global
-
Map extent
-
-180
-
90
- 90
+
Records
-
-90
-
180
- 180
+
From
-
Keywords
-
Results
- نتایج
+
>
- >
+
<<
-
Add WCS
-
Add WMS/WMTS
-
<
-
Add WFS
-
Abstract
- چکیده
+
Double click to see full record information
-
Type
- نوع
+
Title
- عنوان
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
- جدید
+
Edit
- ویرایش
+
Delete
- حذف
+
Save
-
Add default services
-
Load
- بارگذاری
+
Settings
- تنظیمات
+
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
-
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
ModelerDialog
Search...
- جستجو ...
+
Message
- پیام
+
There are unsaved changes in model. Close modeler without saving?
-
Empty model
-
Save Model As Image
-
PNG files (*.png *.PNG)
-
Warning
- هشدار
+
Please enter group and model names before saving
-
Save Model
-
Processing models (*.model)
-
I/O error
-
Unable to save edits. Reason:
%s
-
Can't save model
-
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
-
Model was correctly saved.
-
Open Model
-
Could not open model
-
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
- ورودیها
+
MultipleInputDialog
Select all
- انتخاب همه
+
Clear selection
-
Toggle selection
-
@@ -7291,107 +7258,107 @@ See the log for more information.
Create a new Catalogue connection
-
Name
- نام
+
URL
- مسیر
+
Save connection
- ذخیره اتصال
+
Both Name and URL must be provided
-
Overwrite %s?
-
NotSupportedDbType
%s is not supported yet
-
NumberInputDialog
[Enter your formula here]
-
Values from data layers extents
-
Min X
-
Max X
-
Min Y
-
Max Y
-
Cellsize
-
Values from raster layers statistics
-
Mean
- میانگین
+
Std. deviation
-
Max value
-
Min value
-
Values from QGIS map canvas
-
Current extent
-
Full extent of all layers in map canvas
-
Wrong expression
-
The expression entered is not correct
-
@@ -7399,90 +7366,90 @@ See the log for more information.
Create Oracle Connection
-
Name
- نام
+
Name of the new connection
-
Database instance
-
Username
- کاربری
+
Password
- کلمه عبور
+
Save Password
-
OutputSelectionPanel
[Save to temporary file]
-
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
- ذخیره فایل
+
Select directory
-
PGDatabase
&Table
-
Run &Vacuum Analyze
-
Sorry
- متاسفیم
+
Select a TABLE for vacuum analyze.
-
PGTable
Table rule
-
@@ -7496,49 +7463,49 @@ See the log for more information.
PostGisDBPlugin
There is no defined database connection "%s".
-
PrepareAPIDialog
Error
- خطا
+
Done
- انجام شده
+
Processing
Processing
-
Toolbox
-
Graphical modeler
-
History and log
- تاریخجه و رویداد نامه
+
Options and configuration
-
&Results viewer
-
&Commander
-
@@ -7546,440 +7513,440 @@ See the log for more information.
Processing Toolbox
-
Enter algorithm name to filter list
- برای فیلتر کردن لیست نام الگوریتم را وارد کنید
+
Search...
- جستجو ...
+
Execute
-
Execute as batch process
-
Edit rendering styles for outputs
-
Recently used algorithms
-
Python
Python warning
-
An error has occured while executing Python code:
-
Python version:
-
QGIS version:
-
Python path:
-
Python error
- خطای پایتون
+
Couldn't load plugin '%s' from ['%s']
-
Couldn't load plugin %s
-
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
-
Error while unloading plugin %s
-
PythonConsole
Python Console
- کنسول پایتون
+
Clear console
-
Compile APIs
-
Saving prepared file...
-
Saved
-
Done
- انجام شده
+
Error preparing file...
-
Hide Editor
-
Check Syntax
-
Run selected
-
Run Script
-
Undo
- خنثی کردن
+
Redo
- ازنو
+
Find Text
-
Cut
-
Copy
- کپی
+
Paste
-
Comment
- توضیح
+
Uncomment
-
Share on codepad
-
Hide/Show Object Inspector
-
Select All
- انتخاب همه
+
Settings
- تنظیمات
+
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
-
Connection error:
-
[Temporary file saved in {0}]
-
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
-
You have to save the file before running it.
-
Python Console: Save file
-
Script was correctly saved.
-
Click on button to restore all tabs from last session.
-
Restore tabs
-
Close
- بستن
+
List all tabs
-
New Editor
-
Close Tab
-
Close All
-
Close Others
-
Save As
-
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
-
The file <b>'{0}'</b> has been modified, save changes?
-
Unable to restore the file:
{0}
-
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
-
Show Editor
-
Enter Selected
-
Object Inspector
-
Open file
- باز کردن فایل
+
Save
-
Save As...
- ذخیره به ...
+
Run script
-
Show editor
-
Import Class
-
Import Processing class
-
Enter text to find...
-
Find Next
-
Find Previous
-
Case Sensitive
-
Whole Word
-
Wrap Around
-
Open File
-
Save Error
-
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
-
History saved successfully.
-
Session and file history cleared successfully.
-
History cleared successfully.
-
Command History
-
Show
-
Clear File
-
Clear Session
-
Python Console - Command History
-
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
-
Import PyQt.QtGui class
-
Run command
-
Help
- راهنما
+
@@ -8010,7 +7977,7 @@ See the log for more information.
nautical miles
-
@@ -8019,27 +7986,27 @@ See the log for more information.
Unable to initialize
QOCISpatialDriver
-
Unable to logon
-
Unable to begin transaction
-
Unable to commit transaction
-
Unable to rollback transaction
-
@@ -8049,42 +8016,42 @@ See the log for more information.
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to goto next
-
Unable to alloc statement
-
Unable to prepare statement
-
Unable to get statement type
-
Unable to bind value
-
Unable to execute statement
-
@@ -8092,7 +8059,7 @@ See the log for more information.
Interpolating...
-
محاسبه مشتق عادی ...
- minidump written to %1
-
- writing of minidump to %1 failed (%2)
-
- creation of minidump to %1 failed (%2)
-
- Crash dumped
-
QGIS starting in non-interactive mode not supported.
You are seeing this message most likely because you have no DISPLAY environment variable set.
-
To select features, choose a vector layer in the legend
-
Plugin "%1" is not compatible with this version of QGIS.
It will be disabled.
-
Attempting to resolve the classFactory function
-
There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
%1.
-
Unable to find the class factory for %1.
-
Plugin %1 did not return a valid type and cannot be loaded
-
Error when reading metadata of plugin %1
-
Could not open CRS database %1
Error(%2): %3
-
Generated CRS
A CRS automatically generated from layer info get this prefix for description
ساخت CRS
@@ -8286,7 +8254,7 @@ Error(%2): %3
Imported from GDAL
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate line length.
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
-
ha
-
sq ft
-
acres
-
sq mile
-
feet
-
sq. NM
-
NM
-
sq.deg.
-
Cannot convert '%1' to double
-
Cannot convert '%1' to int
-
Cannot convert '%1' to DateTime
-
Cannot convert '%1' to Date
-
Cannot convert '%1' to Time
-
Cannot convert '%1' to Interval
-
- Cannot convert '%1' to boolean
-
- Domain max must be greater than domain min
-
- Exponent must be greater than 0
-
- Invalid regular expression '%1': %2
-
- Index is out of range
شاخص خارج از محدوده
- Cannot convert '%1:%2:%3' to color
-
- Cannot convert '%1:%2:%3:%4' to color
-
- "%1" is not a valid color ramp
-
- Cannot convert '%1:%2:%3:%4:%5' to color
-
- function help for %1 missing
-
- Operators
-
- Fields and Values
-
- Math
-
- Conversions
تبدیل
- Conditionals
شرطی
@@ -8524,99 +8492,99 @@ Error(%2): %3
second|seconds
list of words separated by | which reference years
-
minute|minutes
list of words separated by | which reference minutes
-
hour|hours
list of words separated by | which reference minutes hours
-
day|days
list of words separated by | which reference days
-
week|weeks
wordlist separated by | which reference weeks
-
month|months
list of words separated by | which reference months
-
year|years
list of words separated by | which reference years
-
- Date and Time
تاریخ و زمان
- String
متن
- Color
- رنگ
+
- Geometry
هندسی
- Record
ثبت
- No root node! Parsing failed?
بدون گره ریشه ! تجزیه شکست خورد ؟
- (no root)
(بدون ریشه)
- Unary minus only for numeric values.
-
- Can't preform /, *, or % on DateTime and Interval
-
- [unsupported type;%1; value:%2]
-
- Column '%1' not found
-
GEOS
-
GEOS prior to 3.2 doesn't support GEOSInterpolate
-
segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
-
ring %1 with less than four points
-
ring %1 not closed
-
line %1 with less than two points
-
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
-
+
segments %1 and %2 of line %3 intersect at %4
-
ring %1 of polygon %2 not in exterior ring
-
GEOS error:could not produce geometry for GEOS (check log window)
-
GEOS error:%1
-
polygon %1 has no rings
-
polygon %1 inside polygon %2
-
infinite
-
W
-
E
-
S
-
N
-
No QGIS data provider plugins found in:
%1
-
No vector layers can be loaded. Check your QGIS installation
-
No data provider plugins are available. No vector layers can be loaded
-
Unable to instantiate the data provider plugin %1
-
Failed to load %1: %2
-
OGR driver for '%1' not found (OGR error: %2)
-
trimming attribute name '%1' to ten significant characters produces duplicate column name.
-
creation of data source failed (OGR error:%1)
-
creation of layer failed (OGR error:%1)
-
unsupported type for field %1
-
creation of field %1 failed (OGR error: %2)
-
created field %1 not found (OGR error: %2)
-
Invalid variant type for field %1[%2]: received %3 with type %4
-
OGR
-
no available replacement for internal fieldname ogc_fid found
-
Reserved attribute name ogc_fid replaced with %1
-
By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
Feature geometry not imported (OGR error: %1)
-
Feature creation error (OGR error: %1)
-
Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
-
Stopping after %1 errors
-
Only %1 of %2 features written.
-
Arc/Info ASCII Coverage
-
Atlas BNA
-
Comma Separated Value
-
ESRI Shapefile
- فایل وکتور Esri
+
DBF file
-
FMEObjects Gateway
-
New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
Limit the number of coordinate pairs per line in multiline format.
-
Set the number of decimal for coordinates. Default value is 10.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
Set to YES to resize fields to their optimal size.
-
DBF File
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
GeoJSON
-
whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
GeoRSS
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
If not specified, GML2 will be used.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
Geography Markup Language [GML]
-
Generic Mapping Tools [GMT]
-
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
GPS eXchange Format [GPX]
-
INTERLIS 1
-
INTERLIS 2
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Keyhole Markup Language [KML]
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Mapinfo TAB
-
Mapinfo MIF
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Microstation DGN
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
S-57 Base file
-
Spatial Data Transfer Standard [SDTS]
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
SQLite
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
SpatiaLite
- SpatiaLite
+
AutoCAD DXF
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
Geoconcept
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
ESRI FileGDB
-
Cannot overwrite a OGR layer in place
-
Failed to transform, writing stopped. (Exception: %1)
-
Unable to load %1 provider
-
Provider %1 has no %2 method
-
Loaded from Provider
-
Loading of layer failed
-
Creation error for features from #%1 to #%2. Provider errors was:
%3
-
Import was canceled at %1 of %2
-
Vector import
-
Only %1 of %2 features written.
-
Reading raster part %1 of %2
-
Building Pyramids...
-
Building pyramids failed - write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
All Ramps
-
Single Symbol
-
Categorized
-
Graduated
-
Rule-based
-
Point displacement
-
Inverted polygons
-
Simple line
-
Marker line
-
Simple marker
-
SVG marker
-
Font marker
-
Ellipse marker
-
Vector Field marker
-
Simple fill
-
Gradient fill
-
Shapeburst fill
-
SVG fill
-
Centroid fill
-
Line pattern fill
-
Point pattern fill
-
Where is '%1' (original location: %2)?
-
QGIS rocks!
-
<html>QGIS rocks!</html>
-
Shows a QtSensors compass reading
-
Version 0.9
-
Capture mouse coordinates in different CRS
-
Version 0.1
-
Version 0.2
-
Layers
لایهها
Dxf2Shp Converter
-
Converts from dxf to shp file format
-
eVis
-
An event visualization tool - view images associated with vector features
-
Database
- پایگاه داده
+
Version 1.1.0
-
This tool only supports vector data
-
No active layers found
-
Georeferencer GDAL
-
Georeferencing rasters using GDAL
-
Could not reproject view extent: %1
-
Could not reproject layer extent: %1
-
Version 3.1.9
-
Fit to a linear transform requires at least 2 points.
-
Fit to a Helmert transform requires at least 2 points.
-
Fit to an affine transform requires at least 4 points.
-
Fitting a projective transform requires at least 4 corresponding points.
-
Globe
-
Overlay data on a 3D globe
-
Tools for loading and importing GPS data
-
Data source
-
Data description
-
Faces
-
Kernels
-
Areas
-
Islands
-
Driver
-
XY
-
UTM
-
SP
-
LL
-
3D Cols
-
3D Rows
-
E-W 3D resolution
-
N-S 3D resolution
-
GRASS
-
GRASS layer
-
Creates a Heatmap raster for the input point vector
-
Interpolation plugin
-
A plugin for interpolation based on vertices of a vector layer
-
Version 0.001
-
OfflineEditing
-
Allow offline editing and synchronizing with database
-
Oracle Spatial GeoRaster
-
Access Oracle Spatial GeoRaster
-
Raster Terrain Analysis plugin
-
A plugin for raster based terrain analysis
-
Road graph plugin
-
It solves the shortest path problem.
-
Processing 1/2 - %p%
-
Processing 2/2 - %p%
-
Intersects
-
Is disjoint
-
Touches
-
Crosses
-
Within
-
Contains
-
Equals
-
Overlaps
-
Spatial Query Plugin
-
A plugin that makes spatial queries on vector layers
-
SPIT
-
Shapefile to PostgreSQL/PostGIS Import Tool
-
+
+ SQL Anywhere plugin
+
+
+ Store vector layers within a SQL Anywhere database
+
Zonal statistics plugin
-
A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
-
Cannot open GDAL MEM dataset %1: %2
-
Cannot GDALCreateGenImgProjTransformer:
-
Cannot inittialize GDALWarpOperation :
-
Cannot ChunkAndWarpImage: %1
-
GDAL/OGR VSIFileHandler
-
This raster file has no bands and is invalid as a raster layer.
-
Cannot get GDAL raster band: %1
-
Nearest Neighbour
-
Average
- میانگین
+
Gauss
-
Cubic
-
Mode
- حالت
+
None
- هیچ یک
+
Couldn't open the data source: %1
-
Parse error at line %1 : %2
-
GPS eXchange format provider
-
GRASS plugin
-
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
-
Choose GRASS installation path (GISBASE)
-
GRASS data won't be available if GISBASE is not specified.
-
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
GISBASE is not set.
-
%1 is not a GRASS mapset.
-
Cannot start %1/etc/lock
-
Mapset is already in use.
-
Temporary directory %1 exists but is not writable
-
Cannot create temporary directory %1
-
Cannot create %1
-
Cannot remove mapset lock: %1
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
Cannot read raster map region
-
Cannot read vector map region
-
Cannot read region
-
Cannot open GISRC file
-
Cannot start module
-
command: %1 %2
-
Cannot run module
-
command: %1 %2<br>%3<br>%4
-
Cannot get projection
-
Cannot get raster extent
-
Cannot get map info
-
Cannot get colors
-
Cannot query raster
-
Cannot draw raster
-
Loading of the MSSQL provider failed
-
Unsupported type for field %1
-
Creation of fields failed
-
OGR[%1] error %2: %3
-
Unable to create the datasource. %1 exists and overwrite flag is false.
-
Unable to get driver %1
-
Arc/Info Binary Coverage
-
DODS
-
OpenFileGDB
-
ESRI Personal GeoDatabase
-
ESRI ArcSDE
-
ESRI Shapefiles
-
GeoPackage
-
Grass Vector
-
Informix DataBlade
-
Ingres
-
Mapinfo File
-
MySQL
-
MSSQL
-
Oracle Spatial
-
ODBC
-
OGDI Vectors
-
PostgreSQL
-
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
UK. NTF2
-
U.S. Census TIGER/Line
-
VRT - Virtual Datasource
-
X-Plane/Flightgear
-
All files
- همه فایلها
+
Duplicate field (10 significant characters): %1
-
Creating the data source %1 failed: %2
-
Unknown vector type of %1
-
Creation of OGR data source %1 failed: %2
-
field %1 with unsupported type %2 skipped
-
creation of field %1 failed
-
Couldn't create file %1.qpj
-
-
- Fetching features failed.
-SQL:%1
-Error: %2
-
Fetching features failed.
+SQL:%1
+Error: %2
+
+
+ Oracle
-
Connection to database failed
-
No owner name found
-
Creation of data source %1 failed:
%2
-
Loading of the layer %1 failed
-
Field name clash found (%1 not remappable)
-
%1 not owner of the table %2.
-
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Unable to delete layer %1.%2:
%3
-
Unable to clean metadata %1.%2:
%3
-
no result buffer
-
Fetching from cursor %1 failed
Database error: %2
-
PostGIS
-
Infinite filter rectangle specified
-
Unable to delete layer %1:
%2
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
Save style in database
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
SQLite error: %2
SQL: %1
-
SQLite error getting feature: %1
-
creation of data source %1 failed. %2
-
loading of the layer %1 failed
-
creation of fields failed
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints [%1]
-
Unable to delete table %1
-
Unable to delete table %1:
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
The extra plugin path '%1' does not exist !
-
Couldn't load SIP module.
-
Python support will be disabled.
-
Couldn't set SIP API versions.
-
Couldn't load PyQt4.
-
Couldn't load PyQGIS.
-
Couldn't load QGIS utils.
-
An error occured during execution of following code:
-
Python version:
-
QGIS version:
-
Python path:
-
Undefined
-
Hidden
-
Title
- عنوان
+
Group
- گروه
+
Subgroup
-
Symbol
-
Symbol label
-
Topology Checker
-
A Plugin for finding topological errors in vector layers
-
Using fix %1.
-
Topology plugin
-
intersecting geometries
-
features too close
-
point not covered by segment
-
segment too short
-
invalid geometry
-
dangling end
-
duplicate geometry
-
pseudo node
-
overlaps
-
gaps
-
point not covered
-
line ends not covered by point
-
point not in polygon
-
polygon does not contain point
-
multipart feature
-
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Save style to DB (%1)
-
Could not save symbology because:
%1
-
Attribute index %1 out of bounds [0;%2]
-
Error
- خطا
+
Layer
- لایه
+
Feature ID
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
-
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- رسته
+
QSpatiaLiteDriver
- Error opening database
-
- Error closing database
-
- Unable to begin transaction
-
- Unable to commit transaction
-
- Unable to rollback transaction
-
@@ -11482,37 +11465,37 @@ Response was:
Unable to fetch row
-
No query
-
- Unable to execute statement
-
- Unable to execute multiple statements at a time
-
- Unable to reset statement
-
- Unable to bind parameters
-
- Parameter count mismatch
-
@@ -11520,82 +11503,82 @@ Response was:
No Error has occurred
-
Invalid file descriptor (port was not opened correctly)
-
Unable to allocate memory tables (POSIX)
-
Caught a non-blocked signal (POSIX)
-
Operation timed out (POSIX)
-
The file opened by the port is not a valid device
-
The port detected a break condition
-
The port detected a framing error (usually caused by incorrect baud rate settings)
-
There was an I/O error while communicating with the port
-
Character buffer overrun
-
Receive buffer overflow
-
The port detected a parity error in the received data
-
Transmit buffer overflow
-
General read operation failure
-
General write operation failure
-
Unknown error: %1
-
@@ -11633,12 +11616,12 @@ Response was:
Browser
-
Browser (2)
-
Log Messages
-
برنامه آماده است!
- Minimize
به حداقل رساندن
- Ctrl+M
Minimize Window
-
- Minimizes the active window to the dock
به حداقل رساندن پنجره جاری
- Zoom
بزرگنمایی
- Toggles between a predefined size and the window size set by the user
جابجایی بین اندازه های از پیش تعریف شده و اندازه پنجره تعیین شده توسط کاربر
- Bring All to Front
به طرف بالا کشاندن
- Bring forward all open windows
انتقال به جلو تمام پنجره های باز شده
- Current Edits
- تغییرات کنونی
+
- Error
خطا
- Failed to open Python console:
کنسول پیتون باز نشد:
QGIS
-
Multiple instances of QGIS application object detected.
Please contact the developers.
-
QGIS - %1 ('%2')
-
- Panels
پنلها
- Toolbars
نوار ابزار
- Window
پنجره
- &Database
&پایگاه دادهها
- &Web
&وب
- Progress bar that displays the status of rendering layers and other time-intensive operations
نوار پردازش که نمایش وضعیت رندر لایهها و دیگر عملیات متمرکز را بر عهده دارد
- Toggle extents and mouse position display
نمایش موقعیت موشواره و اندازه نقشه
- Coordinate:
مختصات:
- Current map coordinate
مختصال جاری نقشه
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
-
- Current map coordinate (lat,lon or east,north)
-
- Scale
مقیاس
- Current map scale
مقیاس جاری نقشه
- Displays the current map scale
نمایش مقیاس جاری نقشه
- Current map scale (formatted as x:y)
مختصات فعلی نقشه بر حسب x,y
- Render
رندر
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
-
- Toggle map rendering
-
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
-
- CRS status - Click to open coordinate reference system dialog
-
- Ready
خواندن
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
-
- Overview
بررسی اجمالی
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
-
- Layers
لایهها
- Map layer list that displays all layers in drawing order.
-
- Layer order
-
Private qgis.db
-
- < Blank >
< خالی >
- QGIS version
نسخه QGIS
- QGIS code revision
-
- Compiled against Qt
کامپایل شده در برابر QT
- Running against Qt
در حال اجرا برابر QT
- Compiled against GDAL/OGR
کامپایل شده در برابر GDAL/OGR
- Running against GDAL/OGR
در حال اجرا برابر GDAL/OGR
- PostgreSQL Client Version
نسخه کاربر PostgreSQL
- No support.
پشتیبانی نمی شود .
- SpatiaLite Version
مسخه SpatiaLite
- QWT Version
نسخه QWT
- PROJ.4 Version
نسخه PROJ.4
- QScintilla2 Version
-
- This copy of QGIS writes debugging output.
-
- %1 doesn't have any layers
%1 هیچ لایه
- Invalid Data Source
نامعتبر منبع داده
- %1 is not a valid or recognized data source
%1 منبع داده معتبر یا به رسمیت شناخته شده نمی شود
- Vector
وکتور
- PostgreSQL
-
- Cannot get PostgreSQL select dialog from provider.
-
- %1 is an invalid layer - not loaded
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
- QGIS files
-
- No legend entries selected
-
- Select the layers and groups you want to remove in the legend.
-
- Remove layers and groups
-
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
- Do you want to save the current project? %1
-
- Invalid Layer
لایه نامعتبر
- SpatiaLite
- SpatiaLite
+
- Cannot get SpatiaLite select dialog from provider.
-
- Delimited Text
-
- Cannot get Delimited Text select dialog from provider.
-
- MSSQL
-
- Cannot get MSSQL select dialog from provider.
نمی توان محاوره MSSQL ارائه نمود .
- Oracle
-
- Cannot get Oracle select dialog from provider.
-
- WMS
WMS
- Cannot get WMS select dialog from provider.
نمی توان سرویس نقشه را دریافت نمود از پنجره محاوره ارائه دهنده .
- WCS
WCS
- Cannot get WCS select dialog from provider.
-
- WFS
-
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
-
- Auto-open Project
-
- Failed to open: %1
-
- Not valid project file: %1
-
- Project failed to open: %1
-
- Default template has been reopened: %1
-
- File not found: %1
-
- Calculating...
در حال محاسبه ...
- Abort...
بی نتیجه ماندن...
- Choose a QGIS project file to open
انتخاب کنید فایل پروژه QGIS را برای باز شدن
- Loading project: %1
-
- Unable to open project
نمی توان پروژه را باز نمود
- Security warning
-
- project macros have been disabled.
-
- Enable macros
- فعال کردن ماکروها
+
- Project loaded
-
- Choose a QGIS project file
یک فایل پروژه QGIS را انتخاب کنید
- Saved project to: %1
ذخیره پروژه در :%1
- Unable to save project %1
قادر به ذخیره پروژه %1
- Choose a file name to save the QGIS project file as
نام فایل را انتخاب کنید تا پروژه QGIS ذخیره شود در
- Unable to load %1
قادر به بارگذاری %1
- Choose a file name to save the map image as
با انتخاب نام فایل نقشه در عکس ذخیره می شود در
- Saved map image to %1
ذخیره نقشه در عکس %1
- Default system font substituted.
-
- Labeling
- بر چسب زدن
+
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
-
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
-
Range
-
Unique Values
-
File Name
-
Value Map
-
Enumeration
-
Hidden
-
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
-
Web View
-
Color
- رنگ
+
Relation Reference
-
Date/Time
-
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
-
- The project file is not writable.
-
- DXF export completed
-
- DXF export failed
-
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
-
- Show more
-
- Labeling Options
-
- Please select a vector layer first
-
- Layer labeling settings
تنظیمات برچسب لایه
- Reading raster
-
- Cannot write raster error code: %1
-
- Saving done
اتمام ذخیره سازی
- Export to vector file has been completed
خروجی فایل وکتور کامل شده است
- Save error
ذخیره خطا
- Export to vector file failed.
Error: %1
خروجی فایل وکتور انجام نشد .
خطای : %1
- No Layer Selected
لایه ای انتخاب نشده است
- To delete features, you must select a vector layer in the legend
برای پاک کردن یا ویرایش ویژگی های شما باید یک لایه بردار در لژاند را انتخاب کنید
- No Vector Layer Selected
لایه وکتور انتخاب نشده است
- Deleting features only works on vector layers
حذف ویژگی های تنها بر روی لایه بردار کار می کند
- Provider does not support deletion
ارائه دهنده حذف را پشتیبانی نمی کند
- Data provider does not support deleting features
ارائه دهنده داده حذف را پشتیبانی نمی کند
- Layer not editable
لایه ویرایش نشده است
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
این لایه قابل ویرایش نیست. برا استفاده از نوار ابزار شروع ویرایش را انتخاب کنید .
-
- No Features Selected
-
-
- The current layer has not selected features
-
No Features Selected
+
+
+ The current layer has not selected features
+
+
+ Delete features
حذف ویژگی ها
- Delete %n feature(s)?
number of features to delete
-
- حذف %n ویژگب ?
-
+ حذف %n ویژگب ?
- Features deleted
حذف ویژگی ها
- Problem deleting features
اشکال در حذف ویژگی ها
- A problem occured during deletion of features
مشکل رخ داده در هنگام حذف برخی ویژگی ها
- %n feature(s) deleted.
number of features deleted
-
-
+
- Merging features...
ادغام ویژگی ها ...
- Abort
ناتمام
- Create unique print composer title
-
- (title generated if left empty)
-
- Composer title
-
- Title can not be empty!
-
- Title already exists!
-
- Composer %1
سازنده %1
- copy
-
- No active layer
لایه فعال نیست
- No active layer found. Please select a layer in the layer list
لایه فعال پیدا نشد . لطفا انتخاب کنید یک لایه موجود در لیست
- Active layer is not vector
لایه فعال وکتور نیست
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
ابزار فقط برای ادغام ویژگی های لایه وکتور. لطفا انتخاب کنید لایه وکتور از لیست لایه ها
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
ادغام ویژگی ها برای لایه در حالت ویرایش. برای استفاده از ابزار ادغام از منوی لایه ها -> تعویض ویرایش استفاده نمائید
- Not enough features selected
ویژگی های کافی انتخاب نشده
- The merge tool requires at least two selected features
ابزار ادغام نیاز به حداقل دو ویژگی انتخاب شده دارد
- Merged feature attributes
ادغام صفات ویژگی ها
- Merge failed
ادغام انجام نشد
- An error occured during the merge operation
یک خطا رخ داده است در طول عملیات ادغام
- Union operation canceled
عمل اتحاد لغو شد
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
-
- Merged features
ادغام ویژگی ها
- No active vector layer
-
- To select features, choose a vector layer in the legend
-
- Features cut
برش ویژگی ها
- Features pasted
درج ویژگی ها
- Paste features
-
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
-
- New memory layer name
-
- Layer name
-
- No features in clipboard.
-
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
-
- Cannot create field %1 (%2,%3)
-
- Cannot copy style: %1
نمی توان سبک نگارش را کپی نمود : %1
- Cannot parse style: %1:%2:%3
نمی توان سبک نگارش را تجزیه و تحلیل نمود : %1:%2:%3
- Cannot read style: %1
سبک نمایش خوانده نشد : %1
- Start editing failed
ویرایش شروع نشد
- Provider cannot be opened for editing
ارائه دهنده خدمات برای ویرایش اجرا نمی شود
- Stop editing
توقف ویرایش
- Do you want to save the changes to layer %1?
آیا شما می خواهید تغییرات در لایه ذخیره شود %1؟
- Problems during roll back
مشکلات در هنگام برگشت
- Could not %1 changes to layer %2
Errors: %3
-
- rollback
-
- cancel
-
- Save
-
- all
-
- Rollback
-
- Cancel
- لغو
+
- Current edits
-
- %1 current changes for %2 layer(s)?
-
- copy
-
- Plugin layer
-
- Memory layer
-
- Duplicate layer:
-
- %1 (duplication resulted in invalid layer)
-
- Set scale visibility for selected layers
-
-
- Couldn't load Python support library: %1
-
Couldn't resolve python support library's instance() symbol.
- Couldn't load Python support library: %1
+
- Couldn't resolve python support library's instance() symbol.
+
+
+ Python support ENABLED :-)
پشتیبانی از پایتون را فعال کنید :-)
- There is a new version of QGIS available
نسخه جدید از QGIS در دسترس وجود دارد
- You are running a development version of QGIS
شما در حال اجرای نسخه توسعه GIS هستید
- You are running the current version of QGIS
شما در حال اجرای نسخه فعلی از QGIS هستید
- Would you like more information?
تمایل دارید اطلاعات بیشتری بدست آورید ؟
- QGIS Version Information
اطلاعات نسخه QGIS
- QGIS - Changes since last release
QGIS - زمان آخرین انتشار تغییرات
- Unable to get current version information from server
قادر به دریافت اطلاعات نسخه فعلی از سرور
- Connection refused - server may be down
-
- QGIS server was not found
QGIS سرور پیدا نشده است
- Unknown network socket error: %1
-
- Unable to communicate with QGIS Version server
%1
قادر به برقراری ارتباط با سرور نسخه QGIS
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
برای انجام کشش کامل هیستوگرام، شما نیاز به به یک لایه رستر انتخاب شده دارید.
- To change brightness or contrast, you need to have a raster layer selected.
-
- en
documentation language
-
- Layer is not valid
لایه معتبر نیست
- The layer %1 is not a valid layer and can not be added to the map
-
- The layer is not a valid layer and can not be added to the map
-
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
- Save?
-
- Current CRS: %1 (OTFR enabled)
جریان CRS: %1 (OTFR فعال)
- Current CRS: %1 (OTFR disabled)
جریان CRS: %1 (OTFR غیر فعال)
- Map coordinates for the current view extents
-
- Map coordinates at mouse cursor position
-
- Extents:
-
- Maptips require an active layer
-
- %n feature(s) selected on layer %1.
number of selected features
-
-
+
- Open a GDAL Supported Raster Data Source
-
- Error adding valid layer to map canvas
-
- Raster layer
-
- %1 is not a supported raster data source
-
- Unsupported Data Source
-
- Exit QGIS
-
- Do you really want to quit QGIS?
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
-
- <tt>Settings:Options:General</tt>
Menu path to setting options
-
- Warn me when opening a project file saved with an older version of QGIS
-
- Project file is older
-
- This project file was saved by an older version of QGIS
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
-
- Warning
هشدار
- This layer doesn't have a properties dialog.
-
- Authentication required
-
- Proxy authentication required
-
- SSL errors occured accessing URL %1:
-
-
Always ignore these errors?
@@ -13184,12 +13157,10 @@ Always ignore these errors?
همیشه این اشتباهات را نادیده بگیر ؟
- %n SSL errors occured
number of errors
-
- %n SSL اشتباهات رخ داده
-
+ %n SSL اشتباهات رخ داده
@@ -13210,25 +13181,25 @@ Always ignore these errors?
About QGIS
-
License
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
-
QGIS is licensed under the GNU General Public License
-
Add tab or group for %1
-
@@ -13405,27 +13376,27 @@ p, li { white-space: pre-wrap; }
Dialog
- محاوره
+
Create category
-
as
-
a tab
-
a group in container
-
@@ -13479,108 +13450,108 @@ p, li { white-space: pre-wrap; }
&Expand All
-
&Collapse All
-
&Remove
-
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Duplicate
-
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As...
- ذخیره به ...
+
Save As Layer Definition File...
-
&Filter...
-
&Properties
-
Copy Style
-
Paste Style
-
QgsApplication
- Exception
استثنا
- unknown exception
-
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13592,65 +13563,65 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
-
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
-
- Migration of private qgis.db failed.
%1
-
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
-
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
@@ -13659,35 +13630,35 @@ User DB Path: %9
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Expression based filename
-
Atlas preview
-
No matching atlas features found!
-
Expression based filter
-
@@ -13695,64 +13666,64 @@ Parser error:
Atlas Generation
-
Generate an atlas
-
Configuration
-
Coverage layer
-
Hidden coverage layer
-
Sort by
-
Sort direction
-
...
- ...
+
Filter with
-
Output
- خروجی
+
Single file export when possible
-
Output filename expression
-
@@ -13761,57 +13732,57 @@ Parser error:
Select an action
File dialog window title
-
Insert expression
- قرار دادن عبارت
+
Missing Information
-
To create an attribute action, you must provide both a name and the action to perform.
-
Echo attribute's value
-
Run an application
-
Get feature id
-
Selected field's value (Identify features tool)
-
Clicked coordinates (Run feature actions tool)
-
Open file
- باز کردن فایل
+
Search on web based on attribute's value
-
@@ -13819,29 +13790,29 @@ Parser error:
Attribute Actions
-
Action list
-
This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
-
Type
- نوع
+
Name
- نام
+
Capture
-
Remove the selected action
-
Move the selected action up
-
Move the selected action down
-
Add default actions
-
Action properties
-
Generic
-
Python
-
Mac
-
Windows
-
Unix
-
Open
-
Captures any output from the action
-
Captures the standard output or error generated by the action and displays it in a dialog box
-
Capture output
-
Enter the name of an action here. The name should be unique (qgis will make it unique if necessary).
-
Enter the action name here
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Enter the action command here
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Browse for action
-
Click to browse for an action
-
Clicking the button will let you select an application to use as the action
-
...
- ...
+
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
-
Inserts the selected field into the action
-
Insert field
-
Inserts the action into the list above
-
Add to action list
-
Update the selected action
-
Update selected action
-
@@ -14021,7 +13992,7 @@ Parser error:
Feature Attributes
-
@@ -14029,7 +14000,7 @@ Parser error:
Attributes changed
- ویژگیهای تغییر داده شده
+
@@ -14069,7 +14040,7 @@ Parser error:
Insert NULL value on top
-
@@ -14090,22 +14061,22 @@ Parser error:
Select attributes
-
Columns
-
Reset
- بارگزاری مجدد
+
Sorting
-
@@ -14136,7 +14107,7 @@ Parser error:
Delete selected features (DEL)
-
Ctrl+U
-
Ctrl+T
-
Ctrl+S
-
Ctrl+C
-
Ctrl+J
-
Ctrl+P
-
Ctrl+E
-
Select features using an expression
-
Ctrl+W
-
Filter
- فیلتر
+
Filters the visible features according to the current filter selection and filter string.
-
Apply
-
mMainViewButtonGroup
-
Table View
-
=
-
Update All
-
Advanced Filter (Expression)
-
Use the Expression Builder to define the filter
-
Ctrl+F
-
Show All Features
-
Show Selected Features
-
Show Edited and New Features
-
Show Features Visible On Map
-
The filter defines which features are currently shown in the list or on the table
-
Form View
-
Column Filter
-
Filter all the features which have been edited but not yet saved
-
Ctrl+L
-
Ctrl+I
-
Attribute table - %1 (%n Feature(s))
feature count
-
- جدول ویژگی - %1 ( %n موجودیت ها )
-
+ جدول ویژگی - %1 ( %n موجودیت ها )
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
-
Update Filtered
-
Error
- خطا
+
An error occured while evaluating the calculation string:
%1
-
Expression based filter
-
Attribute error
-
Error filtering
-
Select All
- انتخاب همه
+
@@ -14459,17 +14428,17 @@ Parser error:
Edit Widget Properties
-
Editable
-
Label on top
-
@@ -14477,67 +14446,67 @@ Parser error:
Normal
-
Lighten
-
Screen
-
Dodge
-
Addition
-
Darken
-
Multiply
-
Burn
-
Overlay
-
Soft light
-
Hard light
-
Difference
-
Subtract
-
@@ -14569,82 +14538,80 @@ Parser error:
Database: %1
Driver: %2
Database: %3
-
ID
- شناسه
+
Name
- نام
+
Project
-
xMin
-
yMin
-
xMax
-
yMax
-
SRID
- SRID
+
New bookmark
-
Unable to create the bookmark.
Driver:%1
Database:%2
-
Really Delete?
-
Are you sure you want to delete %n bookmark(s)?
number of rows
-
-
+
Empty extent
-
Reprojected extent is empty.
-
@@ -14665,7 +14632,7 @@ Database:%2
Cannot get WMS select dialog from provider.
- نمی توان سرویس نقشه را دریافت نمود از پنجره محاوره ارائه دهنده .
+
QGIS Browser
-
Param
-
Metadata
- متاداده
+
Preview
-
Stop rendering
-
Attributes
- خصوصیات
+
toolBar
-
New Shapefile
-
Ctrl+Shift+N
-
Refresh
- به روز رسانی
+
F5
- F5
+
Set layer CRS
-
Manage WMS
-
Manage WMS Connections
-
Ctrl+Shift+W
-
@@ -14775,83 +14742,83 @@ Database:%2
Case Sensitive
-
Filter Pattern Syntax
-
Normal
-
Wildcard(s)
-
Regular Expression
-
Add as a favourite
-
Remove favourite
-
Properties
-
Fast scan this dir.
-
Add Layer
-
Add Selected Layers
-
Add a directory
-
Add directory to favourites
-
Error
- خطا
+
Layer Properties
-
Directory Properties
-
@@ -14859,49 +14826,49 @@ Database:%2
Browser
-
Refresh
- به روز رسانی
+
Add Selected Layers
-
Add
- اضافه
+
Filter Files
-
...
- ...
+
Collapse All
- بستن همه
+
Options
-
Filter files
-
@@ -14955,77 +14922,77 @@ Database:%2
Solid
-
No Brush
-
Horizontal
- افقی
+
Vertical
-
Cross
-
BDiagonal
-
FDiagonal
-
Diagonal X
-
Dense 1
-
Dense 2
-
Dense 3
-
Dense 4
-
Dense 5
-
Dense 6
-
Dense 7
-
@@ -15033,7 +15000,7 @@ Database:%2
QGIS
-
@@ -15041,40 +15008,40 @@ Database:%2
Form
- فرم
+
A calendar widget to enter a date.
-
Date format
-
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
-
- Value
مقدار
- Label
-
@@ -15087,99 +15054,99 @@ Database:%2
Symbol
-
Change...
-
Color ramp
-
Invert
-
Classify
-
Add
- اضافه
+
Delete
- حذف
+
Delete all
-
Join
-
Advanced
-
- Random colors
-
- Symbol levels...
- سطوح نماد ...
+
- High number of classes!
-
- Classification would yield %1 entries which might not be expected. Continue?
-
- Error
- خطا
+
- There are no available color ramps. You can add them in Style Manager.
-
+
+ The selected color ramp is not available.
+
The selected color ramp is not available.
-
-
- Confirm Delete
-
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
-
@@ -15187,17 +15154,17 @@ Should the existing classes be deleted before classification?
Character Selector
-
Font:
-
Current font family and style
-
@@ -15205,17 +15172,17 @@ Should the existing classes be deleted before classification?
Form
- فرم
+
Representation for checked state
-
Representation for unchecked state
-
@@ -15223,35 +15190,30 @@ Should the existing classes be deleted before classification?
Shift-click to expand, then collapse others
-
Ctrl (or Alt)-click to toggle all
-
QgsColorButton
- Select Color
-
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -15259,7 +15221,7 @@ Should the existing classes be deleted before classification?
Select Color
-
@@ -15268,7 +15230,7 @@ Should the existing classes be deleted before classification?
Random colors
-
Internal Compass
- قطب نما داخلی
+
Azimut
-
@@ -15315,253 +15277,253 @@ Should the existing classes be deleted before classification?
Close
- بستن
+
QGIS
-
Composer
-
Print Composers
- چاپ سازنده
+
Cu&t
-
Cut
-
&Copy
-
Copy
- کپی
+
&Paste
-
Paste
-
Edit
- ویرایش
+
Normal
-
Simulate Photocopy (Grayscale)
-
Simulate photocopy (grayscale)
-
Simulate Fax (Mono)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
View
-
Panels
- پنلها
+
Toolbars
- نوار ابزار
+
Layout
-
Atlas
-
Settings
- تنظیمات
+
Window
- پنجره
+
Help
- راهنما
+
%1%
-
Composition
-
Item properties
-
Command history
-
Atlas generation
-
Set as atlas feature for %1
-
x: %1 mm
-
y: %1 mm
-
page: %3
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
Choose a file name to save the map as
-
PDF Format
-
Empty filename pattern
-
The filename pattern is empty. A default one will be used.
-
Directory where to save PDF files
-
Unable to write into the directory
-
The given output directory is not writable. Cancelling.
-
Atlas processing error
-
Feature filter parser error: %1
-
Error creating %1.
-
Rendering maps...
-
Abort
-
- Big image
-
- To create image %1x%2 requires about %3 MB of memory. Proceed?
-
- Choose a file name to save the map image as
- با انتخاب نام فایل نقشه در عکس ذخیره می شود در
+
- Memory Allocation Error
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
-
- Image export error
-
- Directory where to save image files
-
- Image format:
-
- SVG warning
-
-
- Don't show this message again
- این پیام دوباره نشان داده نشود
-
-
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
-
Don't show this message again
+
+
+ <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
+
+
+ Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
-
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
-
- SVG Format
-
- Directory where to save SVG files
-
- SVG export error
-
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
-
- Duplicating composer...
-
- Duplicate Composer
-
- Composer duplication failed.
-
- Save template
-
- Composer templates
-
- Save error
- ذخیره خطا
+
- Error, could not save file
-
- Load template
-
- Read error
-
- Error, could not read file
-
- Composer error
-
- Error, could not create new composer
-
- Loading template into composer...
-
- Project contains WMS layers
-
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
-
-
- Project contains composition effects
-
-
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
-
Print as raster
- Project contains composition effects
+
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
+
+
+ Print as raster
+
+
+ Landscape
-
@@ -15822,51 +15784,51 @@ Please try a lower resolution or a smaller papersize
Arrow outline width
-
Arrowhead width
-
Arrow color changed
-
Select arrow color
-
Arrow marker changed
-
Arrow start marker
-
Arrow end marker
-
Start marker svg file
-
End marker svg file
-
@@ -15874,74 +15836,74 @@ Please try a lower resolution or a smaller papersize
Form
- فرم
+
Arrow
-
Main properties
-
Line width
- عرض خط
+
mm
- میلی متر
+
Arrow head width
-
Color...
-
Arrow markers
-
Default
- پیش فرض
+
None
- هیچ یک
+
SVG
-
Start marker
-
...
- ...
+
End marker
-
@@ -15949,32 +15911,32 @@ Please try a lower resolution or a smaller papersize
Center
- مرکز
+
Right
- راست
+
Left
- چپ
+
Attribute
-
Heading
-
Alignment
- هم ترازی
+
@@ -15987,27 +15949,27 @@ Please try a lower resolution or a smaller papersize
Composer
-
Paper Navigation
-
Composer Item Actions
-
Composer Items
-
Atlas
-
Ctrl+P
-
Zoom full
-
Ctrl+0
-
Zoom in
-
Ctrl++
-
Zoom out
-
Ctrl+-
-
Zoom to 100%
-
Ctrl+1
-
Zoom
- بزرگنمایی
+
Export as image
-
Show Grid
-
Show grid
-
Ctrl+'
-
Snap to Grid
-
Snap to grid
-
Ctrl+Shift+'
-
Show Guides
-
Show guides
-
Ctrl+;
-
Snap to Guides
-
Snap to guides
-
Ctrl+Shift+;
-
Smart Guides
-
Smart guides
-
Ctrl+Alt+;
-
Clear Guides
-
Clear guides
-
Add image
-
Ctrl+G
-
Ctrl+Shift+G
-
Ctrl+]
-
Ctrl+[
-
Ctrl+Shift+]
-
Ctrl+Shift+[
-
Load from Template
-
Load from template
-
Save as Template
-
Align Left
-
Align Center
-
Align Right
-
Align Top
-
Align Center Vertical
-
Align Bottom
-
Add Arrow
-
Add Table
-
Add attribute table
-
Page setup
-
Ctrl+Shift+P
-
&Undo
- &برگشت
+
&Redo
- &ازنو
+
Ctrl+Shift+L
-
Pa&ste in Place
-
Paste in place
-
Ctrl+Shift+V
- Ctrl+Shift+V
+
&Delete
- &حذف
+
Delete selected items
-
Del
-
De&select All
-
Deselect all
-
Ctrl+Shift+A
-
Select &All
-
Select all items
-
Ctrl+A
-
&Invert Selection
-
Invert selection
-
Select Next Item &Below
-
Select next item below
-
Ctrl+Alt+[
-
Select Next Item &Above
-
Select next item above
-
Ctrl+Alt+]
-
Pan Composer
-
Composer Options...
-
Show Rulers
-
Show rulers
-
Ctrl+R
-
First Feature
-
Previous Feature
-
Next Feature
-
Last Feature
-
Preview Atlas
-
Print Atlas...
-
Export Atlas as Images...
-
Export Atlas as SVG...
-
Export Atlas as PDF...
-
Export Atlas as PDF
-
Atlas Settings
-
Add rectangle
-
Add triangle
-
Add ellipse
-
Add HTML
-
Composer Manager
-
Composer manager
- مدیریت سازنده
+
&New Composer
-
New composer
-
Ctrl+N
-
&Save Project
-
Save project
-
Ctrl+S
-
&Duplicate Composer
-
Duplicate composer
-
New from Template
-
New from template
-
Lock Selected Items
-
Ctrl+L
-
Unlock All
-
Unlock All Items
-
@@ -16827,17 +16789,17 @@ Please try a lower resolution or a smaller papersize
Left
- چپ
+
Center
- مرکز
+
Right
- راست
+
@@ -16845,12 +16807,12 @@ Please try a lower resolution or a smaller papersize
Ascending
- صعودی
+
Descending
- نزولی
+
@@ -16858,42 +16820,42 @@ Please try a lower resolution or a smaller papersize
Use existing frames
-
Extend to next page
-
Repeat on every page
-
Repeat until finished
-
Change html url
-
Select HTML document
-
Change resize mode
-
Use smart breaks changed
-
@@ -16901,17 +16863,17 @@ Please try a lower resolution or a smaller papersize
HTML Frame
-
HTML frame
-
Main properties
-
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
- میلی متر
+
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
-
- Background color changed
-
- Item position changed
-
- Item outline width
-
- Item frame join style
-
- Item frame toggled
-
- Item background toggled
-
- Select background color
- انتخاب رنگ پس زمینه
+
- Select frame color
- انتخاب رنگ چهارچوب
+
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
-
- Item rotation changed
-
@@ -17027,120 +16989,109 @@ Please try a lower resolution or a smaller papersize
Global Options
-
- Position and size
-
- Reference point
-
- X
- X
+
- Y
- Y
+
- Width
- عرض
+
- Height
- ارتفاع
+
- Page
-
- ...
- ...
-
-
- Rotation
-
- °
-
- Frame
-
- mm
- میلی متر
+
- Join style
- اتصال سبک ها
+
- Rendering
- رندر
+
- Blending mode
-
- Thickness
-
- Color...
-
- Background
-
- Transparency
- شفافیت
+
- Item ID
شناسه اطلاعات
- Id
-
@@ -17168,21 +17119,21 @@ Please try a lower resolution or a smaller papersize
Label color changed
-
- Insert expression
قرار دادن عبارت
- Label alignment changed
تراز برچسب تغییر کرد
@@ -17202,17 +17153,17 @@ Please try a lower resolution or a smaller papersize
Main properties
-
Render as HTML
-
Insert an expression
-
Alignment
- هم ترازی
+
Vertical
-
Horizontal
- افقی
+
Display
- نمایش
+
Margin
-
mm
- میلی متر
+
QgsComposerLegend
+ Legend
- رسته
+ رسته
@@ -17318,12 +17270,12 @@ Please try a lower resolution or a smaller papersize
Item
-
Title style
-
Legend title alignment changed
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
گروه رسته اضافه شد
- Map %1
نقشه %1
- None
هیچ یک
@@ -17469,17 +17421,17 @@ Please try a lower resolution or a smaller papersize
Legend Options
-
Legend
- رسته
+
Main properties
-
Show feature count for each class of vector layer.
-
Fonts
-
Space above text using subgroup style.
-
Subgroup space
-
Space above symbol and symbol label.
-
Column space
-
Font color...
- رنگ قلم ...
+
Count
-
Equal column widths
-
Allow to split layer items into multiple columns.
-
Split layers
-
Spacing
-
Title alignment:
-
Left
- چپ
+
Center
- مرکز
+
Right
- راست
+
Update legend. User defined labels are preserved.
-
Update item
-
Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
-
Update all
-
...
- ...
+
Auto update
-
Title font...
-
Subgroup font...
-
Group font...
-
Item font...
-
Symbol
-
Symbol width
-
Symbol height
-
WMS LegendGraphic
-
Legend width
-
Legend height
-
Space above text using group style.
-
Group Space
-
Symbol space
-
Space between symbol icon and symbol label (symbol label left margin).
-
Icon label space
-
Box space
-
Space below title.
-
Title space
-
@@ -17733,119 +17685,119 @@ Please try a lower resolution or a smaller papersize
&Show
-
&Duplicate
-
&Remove
-
Re&name
-
Empty composer
-
Specific
-
Template error
-
Error, template file not found
-
Error, could not read file
-
Composer error
-
Error, could not create composer
-
Loading template into composer...
-
Error, could not load template file
-
Choose template
-
Composer templates
-
File system error
-
Error, could not open or create local directory
-
Remove composer
-
Do you really want to remove the map composer '%1'?
-
copy
-
Duplicating composer...
-
Duplicate Composer
-
Composer duplication failed.
-
@@ -17858,7 +17810,7 @@ Please try a lower resolution or a smaller papersize
New from template
-
...
- ...
+
Open template directory
-
user
-
default
-
QgsComposerMap
- Map %1
نقشه %1
- Map will be printed here
قصد داردید نقشه را اینجا چاپ کنید
-
- Grid %1
-
QgsComposerMapWidget
- Cache
-
- Render
- رندر
+
+
+ Rectangle
+
Rectangle
- Solid
+
- Solid
- Cross
+
Cross
- Decimal
+
Markers
- DegreeMinute
+
- Decimal
- DegreeMinuteSecond
+
+
+ No frame
+
+
+ Zebra
+
+
+ Map scale changed
+
+
+ Map rotation changed
+
+
+ Map extent changed
+
DegreeMinute
-
-
- DegreeMinuteSecond
-
-
- Zebra
-
-
- Map scale changed
-
-
- Map rotation changed
-
-
- Map extent changed
-
-
- Select font color
- انتخاب رنگ قلم
+
Select grid frame color
-
Select grid frame fill color
-
- Canvas items toggled
-
- None
- هیچ یک
+
- Overview frame style changed
-
- Overview centering mode changed
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- change...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
-
- Grid interval changed
-
- Grid offset changed
-
- Grid line style changed
-
- Grid type changed
-
- Grid cross width changed
+
+
+ Annotation font changed
-
- Label font changed
+
+
+ Annotation distance changed
-
- Annotation format changed
-
- Annotation toggled
-
- Changed annotation precision
-
- Changed grid frame style
-
- Changed grid frame width
+
+
+ Changed grid frame line thickness
-
- Grid frame color changed
-
- Grid frame first fill color changed
-
- Grid frame second fill color changed
-
- Inside frame
-
- Outside frame
-
- Disabled
-
- Horizontal
- افقی
+
- Vertical
-
- Annotation position changed
-
- Changed annotation direction
-
- Map %1
- نقشه %1
+
@@ -18227,374 +18117,292 @@ Please try a lower resolution or a smaller papersize
Map Options
-
- Map
- نقشه
+
- Main properties
-
- Update preview
-
- Scale
مقیاس
- Map rotation
-
- Draw map canvas items
-
- Lock layers for map item
-
- Extents
-
- X max
-
- Y min
-
- Y max
-
+
+ Set to map canvas extent
+
+
+ X min
+
+
+ View extent in map canvas
+
+
+ Controlled by atlas
+
+
+ Margin around feature
+
Set to map canvas extent
-
-
- X min
-
-
- View extent in map canvas
-
-
- Controlled by atlas
-
-
- Margin around feature
-
-
- %
- %
+
- Fixed scale
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
- Predefined scale (best fit)
-
- Show grid
+
+
+ Grid &type
+
+
+ Offset
- افست
+
- mm
- میلی متر
+
- Blend mode
-
- Interval
-
- Grid frame
-
- Frame size
-
- Frame line thickness
-
+
+ Color...
+
+
+ Frame fill colors
+
+
+ Overview blending mode
+
+
+ Invert overview
+
+
+ Center on overview
+
+
+ X
+
+
+ °
+
+
+ Y
+
+
+ Cross width
+
+
+ Frame style
+
+
+ Line style
+
+
+ change...
+
+
+ Draw coordinates
+
+
+ Format
+
+
+ Left
+
+
+ Right
+
Color...
- Top
+
- Frame fill colors
- Bottom
+
- Marker style
- سبک نشانگر
-
-
- Overview blending mode
-
-
- Invert overview
-
-
- Center on overview
-
-
- X
-
-
- °
-
-
- Y
-
-
- Cross width
- Font
+
Frame style
-
-
- Line style
-
-
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
-
-
- CRS
-
-
- change...
-
-
- Interval units
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- No frame
-
-
- Zebra
-
-
- Draw coordinates
-
-
- Format
- قالب
-
-
- Left
- چپ
-
-
- Right
- راست
-
-
- Top
- بالا
-
-
- Bottom
- پایین
-
-
- Font
- قلم
-
-
- Font...
-
- Font color
- رنگ فونت
-
-
- Distance to map frame
-
- Coordinate precision
-
- Font color...
- رنگ قلم ...
+
- Overview
- بررسی اجمالی
+
- Overview frame
-
- Overview style
-
- Change...
-
@@ -18602,51 +18410,51 @@ Please try a lower resolution or a smaller papersize
Change item position
-
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
-
- Picture expression eval error: %1
-
@@ -18654,71 +18462,71 @@ Please try a lower resolution or a smaller papersize
Select svg or image file
-
Picture changed
-
- Expression based image path
-
- Picture rotation changed
-
- Select new preview directory
-
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
-
- Rotation map changed
-
- Map %1
- نقشه %1
+
- Creating icon for file %1
-
@@ -18726,408 +18534,383 @@ Please try a lower resolution or a smaller papersize
Picture Options
-
Picture
-
Main properties
-
Image source
-
Path
- مسیر
+
...
- ...
+
Expression
-
Resize mode
- حالت تغییر اندازه
+
Placement
- جایگذاری
+
Zoom
- بزرگنمایی
+
Stretch
-
Clip
-
Zoom and resize frame
-
Resize frame to image size
-
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
- وسط
+
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Search directories
-
Loading previews...
-
Image search paths
-
Remove
- حذف
+
Add...
-
Image rotation
-
Sync with map
-
°
-
QgsComposerScaleBar
- units
-
- km
کیلومتر
- m
متر
- miles
-
- ft
-
- Nm
-
QgsComposerScaleBarWidget
Single Box
-
Double Box
-
Line Ticks Middle
-
Line Ticks Down
-
Line Ticks Up
-
Numeric
-
Left
- چپ
+
Middle
- وسط
+
Right
- راست
+
Map units
-
Meters
- متر
+
Feet
- پا
+
Nautical Miles
-
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- انتخاب رنگ قلم
-
-
- Select stroke color
-
-
- Map %1
- نقشه %1
+
- Scalebar map changed
تغيير نوار مقیاس نقشه
- Scalebar line width
عرض خط نوار مقیاس
- Scalebar segment size
اندازه قطعات نوار مقیاس
- Scalebar segments left
قطعات سمت چپ نوار مقیاس
- Number of scalebar segments changed
-
- Scalebar height changed
تغيير ارتفاع نوار مقیاس
- Scalebar font changed
تغيير قلم نوار مقیاس
- Scalebar font color changed
-
- Scalebar color changed
-
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
-
- Scalebar unit text
-
- Scalebar map units per segment
-
- Scalebar style changed
-
- Scalebar label bar space
-
- Scalebar box content space
-
- Scalebar alignment
-
- Scalebar changed to map units
-
- Scalebar changed to feet
-
- Scalebar changed to nautical miles
-
- Scalebar changed to meters
-
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -19135,7 +18918,7 @@ Please try a lower resolution or a smaller papersize
Barscale Options
-
Main properties
-
Map
- نقشه
+
Style
- سبک
+
Units
-
Label
-
Map units per bar unit
-
Segments
- بخش
+
left
-
right
-
Size
- اندازه
+
units
-
Height
- ارتفاع
+
mm
- میلی متر
+
Display
- نمایش
+
Box margin
-
Labels margin
-
Line width
- عرض خط
+
Join style
- اتصال سبک ها
+
Cap style
- سبک کلاهک
+
Alignment
- هم ترازی
+
Fonts and colors
-
Font...
-
Font color...
- رنگ قلم ...
+
Fill color...
-
Secondary fill color...
-
-
- Stroke color...
-
@@ -19282,39 +19060,39 @@ Please try a lower resolution or a smaller papersize
Ellipse
-
Rectangle
-
Triangle
-
- Shape style changed
-
- Shape radius changed
-
- Shape type changed
-
@@ -19322,37 +19100,37 @@ Please try a lower resolution or a smaller papersize
Form
- فرم
+
Shape
-
Main properties
-
Corner radius
-
mm
- میلی متر
+
Style
- سبک
+
Change...
-
@@ -19360,22 +19138,22 @@ Please try a lower resolution or a smaller papersize
Descending
- نزولی
+
Ascending
- صعودی
+
Attribute
-
Sort Order
-
@@ -19384,49 +19162,49 @@ Please try a lower resolution or a smaller papersize
Map %1
- نقشه %1
+
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
-
Table header alignment changed
-
Table layer changed
-
Table attribute settings
-
Table map changed
-
Table maximum columns
-
Select Font
-
Table header font
-
Table content font
-
Table grid stroke
-
Select grid color
-
Table grid color
-
Table grid toggled
-
Table visible only toggled
-
@@ -19477,32 +19255,32 @@ Please try a lower resolution or a smaller papersize
Attribute Table
- مشخصات جدول
+
Attribute table
-
Main properties
-
Layer
- لایه
+
Attributes...
-
Composer map
-
Margin
-
Show only visible features
-
Refresh table data
-
Filter with
-
...
- ...
+
mm
- میلی متر
+
Show grid
-
Stroke width
-
Color...
-
Fonts
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
- چپ
+
Center
- مرکز
+
Right
- راست
+
@@ -19649,62 +19427,62 @@ Please try a lower resolution or a smaller papersize
QGIS
-
Label added
-
Scale bar added
-
Legend added
-
Picture added
-
Table added
-
Shape added
-
Move item content
- انتقال محتوا آیتم
+
Arrow added
-
Map added
-
Html item added
-
Html frame added
-
Item moved
-
Zoom item content
-
QgsComposition
- Label added
-
- Map added
-
- Arrow added
-
- Scale bar added
-
- Shape added
-
- Picture added
-
- Legend added
-
- Table added
-
+
+ Aligned items left
+
+
+ Aligned items horizontal center
+
+
+ Aligned items vertical center
+
Aligned items left
-
-
- Aligned items horizontal center
-
-
- Aligned items vertical center
-
-
- Aligned items right
-
- Aligned items top
-
- Aligned items bottom
-
- Items locked
-
- Items unlocked
-
- Item z-order changed
-
- Remove item group
-
- Frame deleted
-
- Item deleted
-
- Multiframe removed
-
@@ -19833,37 +19611,37 @@ Please try a lower resolution or a smaller papersize
Composition
-
Paper
-
Size
- اندازه
+
Units
-
Width
- عرض
+
Height
- ارتفاع
+
Orientation
-
@@ -19871,159 +19649,159 @@ Please try a lower resolution or a smaller papersize
mm
-
inch
-
Landscape
-
Portrait
-
Map %1
- نقشه %1
+
- A5 (148x210 mm)
-
- A4 (210x297 mm)
-
- A3 (297x420 mm)
-
- A2 (420x594 mm)
-
- A1 (594x841 mm)
-
- A0 (841x1189 mm)
-
- B5 (176 x 250 mm)
-
- B4 (250 x 353 mm)
-
- B3 (353 x 500 mm)
-
- B2 (500 x 707 mm)
-
- B1 (707 x 1000 mm)
-
- B0 (1000 x 1414 mm)
-
- Legal (8.5x14 in)
-
- ANSI A (Letter; 8.5x11 in)
-
- ANSI B (Tabloid; 11x17 in)
-
- ANSI C (17x22 in)
-
- ANSI D (22x34 in)
-
- ANSI E (34x44 in)
-
- Arch A (9x12 in)
-
- Arch B (12x18 in)
-
- Arch C (18x24 in)
-
- Arch D (24x36 in)
-
- Arch E (36x48 in)
-
- Arch E1 (30x42 in)
-
- Custom
-
@@ -20031,123 +19809,117 @@ Please try a lower resolution or a smaller papersize
Composition
-
Paper and quality
-
- Presets
-
- ...
- ...
-
-
- Width
- عرض
+
- Height
- ارتفاع
+
- Units
-
- Number of pages
-
- Orientation
-
- Export resolution
-
- Print as raster
-
-
- Snap tolerance
-
-
- px
- پيکسل
+
Change...
-
- Page background
-
- Grid
+
+
+ dpi
-
- World file on
-
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
- میلی متر
+
- Grid offset
-
- x:
-
- y:
-
+
+ Spacing
+
+
+ Snap to alignments
+
+
+ Tolerance
+
@@ -20155,7 +19927,7 @@ Please try a lower resolution or a smaller papersize
Configure shortcuts
-
Shortcut
-
Change
- تغییر
+
Set none
-
Set default
-
Load...
-
Save...
-
Save shortcuts
-
XML file
-
All files
- همه فایلها
+
Saving shortcuts
-
Cannot write file %1:
%2.
-
Load shortcuts
-
Loading shortcuts
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an shortcuts exchange file.
-
The file contains shortcuts created with different locale, so you can't use it.
-
None
- هیچ یک
+
Set default (%1)
-
Input:
-
Shortcut conflict
-
This shortcut is already assigned to action %1. Reassign?
-
@@ -20287,17 +20059,17 @@ Please try a lower resolution or a smaller papersize
Error starting help viewer [%1]
-
Context help
-
<h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
-
@@ -20305,7 +20077,7 @@ Please try a lower resolution or a smaller papersize
The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
inverse transform
-
forward transform
-
%1 of
%2PROJ.4: %3 +to %4
Error: %5
-
@@ -20382,24 +20154,24 @@ Error: %5
Selections by theme
-
All by author
-
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
All Ramps (%1)
-
%1 directory details
-
%1 gradient details
-
@@ -20432,53 +20204,53 @@ and current file is [%3]
cpt-city color ramp
-
Selection and preview
-
License
-
Palette
-
Path
- مسیر
+
Information
- اطلاعات
+
Author(s)
-
Source
- منبع
+
Details
-
Save as standard gradient
-
@@ -20515,7 +20287,7 @@ and current file is [%3]
Control rendering order
-
@@ -20526,32 +20298,32 @@ and current file is [%3]
QGIS Custom Projection
-
This proj4 projection definition is not valid.
-
new CRS
-
The proj4 definition of '%1' is not valid.
-
Northing and Easthing must be in decimal form.
-
Internal Error (source projection invalid?)
-
Custom Coordinate Reference System Definition
-
ID
- شناسه
+
You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
-
Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
-
Geographic / WGS84
-
Destination CRS
-
Name:
-
Parameters:
- ورودیها:
+
Copy
existing CRS
-
Add new CRS
-
Remove
- حذف
+
Customization
-
Enable customization
-
toolBar
-
Catch
-
Switch to catching widgets in main application
-
Description...
-
Edit...
- ویرایش ...
+
Paste
-
Copy
- کپی
+
Clear
- تمیز
+
string
-
int
-
double
-
Field type:
-
integer
-
unknown type
-
Data defined override
-
expression
-
field
- فیلد
+
Deactivate
-
Activate
-
Attribute field
-
No matching field types found
-
Expression
-
Current:
-
Data definition description
-
undefined
-
Parse error: %1
-
'%1' field missing
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
yes
- بلی
+
no
- خیر
+
<b>Usage:</b><br>%1<br>
-
<b>Expected input:</b><br>%1<br>
-
<b>Valid input types:</b><br>%1<br>
-
<b>Current definition %1:</b><br>%2
-
string
-
bool [<b>1</b>=True|<b>0</b>=False]
-
string of variable length
-
int [<= 0 =>]
-
int [>= 0]
-
int [>= 1]
-
double [<= 0.0 =>]
-
double [>= 0.0]
-
double coord [<b>X,Y</b>] as <= 0.0 =>
-
double [-180.0 - 180.0]
-
int [0-100]
-
string [<b>r,g,b</b>] as int 0-255
-
string [<b>r,g,b,a</b>] as int 0-255
-
@@ -21003,57 +20775,57 @@ and current file is [%3]
Data defined properties
-
Property
-
Expression
-
Help
- راهنما
+
double
-
'<red>,<green>,<blue>,<alpha>'
-
'<filename>'
-
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -21061,68 +20833,68 @@ and current file is [%3]
Form
- فرم
+
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
-
custom
-
preview
-
@@ -21130,13 +20902,13 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
unknown
- مجهول
+
@@ -21144,42 +20916,42 @@ and current file is [%3]
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Destination CRS
-
Source CRS
-
Layer
- لایه
+
@@ -21238,7 +21010,7 @@ and current file is [%3]
Hold dialog open
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
&Placement
-
Bottom Left
- پایین چپ
+
Top Left
- بالا چپ
+
Bottom Right
- پایین راست
+
Top Right
- بالا راست
+
&Orientation
-
Horizontal
- افقی
+
Vertical
-
Color
- رنگ
+
@@ -21392,122 +21164,122 @@ p, li { white-space: pre-wrap; }
Grid properties
-
Enable grid
-
Interval X
-
Interval Y
-
Grid type
-
Line symbol
-
Draw annotation
-
Annotation direction
-
Font...
-
Distance to map frame
-
Coordinate precision
-
Marker symbol
-
Offset X
-
Offset Y
-
Update Interval / Offset from
-
Canvas Extents
-
Active Raster Layer
-
Line
- خطی
+
Marker
- نشانگر
+
Horizontal
- افقی
+
Vertical
-
Boundary direction
-
Horizontal and Vertical
-
@@ -21543,62 +21315,62 @@ p, li { white-space: pre-wrap; }
North Arrow Decoration
-
Preview of north arrow
-
Angle
- زاویه
+
Placement
- جایگذاری
+
Placement on screen
-
Top Left
- بالا چپ
+
Top Right
- بالا راست
+
Bottom Left
- پایین چپ
+
Bottom Right
- پایین راست
+
Enable North Arrow
-
Set direction automatically
-
Pixmap not found
- نگاشت تصویر دانهای یافت نشد
+
@@ -21606,102 +21378,102 @@ p, li { white-space: pre-wrap; }
Bottom Left
- پایین چپ
+
Top Left
- بالا چپ
+
Top Right
- بالا راست
+
Bottom Right
- پایین راست
+
Tick Down
-
Tick Up
-
Bar
-
Box
- جعبه
+
km
- کیاومتر
+
mm
- میلی متر
+
cm
- سانتی متر
+
m
- متر
+
miles
-
mile
- مایل
+
inches
-
foot
- فوت (پا)
+
feet
-
degree
- درجه
+
degrees
- درجه ها
+
unknown
- ناشناخته
+
@@ -21709,97 +21481,97 @@ p, li { white-space: pre-wrap; }
Scale Bar Decoration
-
Placement
- جایگذاری
+
Top Left
- بالا چپ
+
Top Right
- بالا راست
+
Bottom Left
- پایین چپ
+
Bottom Right
- پایین راست
+
Scale bar style
-
Select the style of the scale bar
-
Tick Down
-
Tick Up
-
Box
- جعبه
+
Bar
-
Color of bar
-
Size of bar
-
Enable scale bar
-
Automatically snap to round number on resize
-
metres/km
-
feet/miles
-
degrees
- درجه ها
+
@@ -21815,12 +21587,12 @@ p, li { white-space: pre-wrap; }
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -21906,122 +21678,122 @@ p, li { white-space: pre-wrap; }
No layer name
-
Please enter a layer name before adding the layer to the map
-
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Invalid regular expression
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Choose a delimited text file to open
-
Text files
-
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
Regular expression is not valid
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
All files
- همه فایلها
+
@@ -22029,449 +21801,449 @@ p, li { white-space: pre-wrap; }
Create a Layer from a Delimited Text File
-
File Name
-
Full path to the delimited text file
-
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
-
Layer name
-
Name to display in the map legend
-
Name displayed in the map legend
-
Browse to find the delimited text file to be processed
-
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
-
Browse...
- فهرست...
+
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
Tab
-
Space
- فضای خالی
+
Comma
-
Encoding
-
Select the file encoding
-
X and Y coordinates are expressed in degrees/minutes/seconds
-
DMS coordinates
-
Geometry field
-
Name of the field containing well known text value
-
Geometry type
-
Detect
-
Point
- نقطه
+
Line
- خطی
+
Polygon
- چند ضلعی
+
Record options
-
Field options
-
File format
-
Number of header lines to discard
-
The number of lines to discard from the beginning of the file
-
Field names are read from the first record. If not selected then fields are numbered
-
First record has field names
-
CSV (comma separated values)
-
Fields are defined by the specified delimiter, quote, and escape characters
-
Custom delimiters
-
Regular expression delimiter
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use spatial index
-
Use an index to improve performance of subset filters (set in layer properties)
-
Use subset index
-
Watch for changes to the file by other applications while QGIS is running
-
Watch file
-
Geometry definition
-
Geometry is a point defined by X and Y coordinate fields
-
Point coordinates
-
Geometry is read as a well known text string from the selected fields
-
Well known text (WKT)
-
The file contains only attribute information - it will not be displayed on the map
-
No geometry (attribute only table)
-
Trim leading and trailing spaces from fields
-
Trim fields
-
Discard empty fields in each record
-
Discard empty fields
-
Number fields use comma for a decimal separator
-
Decimal separator is comma
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Semicolon
-
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
-
Regular expression used to split each line into fields
-
Layer settings
-
Sample data
-
Colon
-
<p align="right">X field</p>
-
Name of the field containing x values
-
<p align="right">Y field</p>
-
Name of the field containing y values
-
@@ -22503,180 +22275,180 @@ p, li { white-space: pre-wrap; }
mm
-
Map units
-
Around Point
-
Over Point
-
Line
- خطی
+
Horizontal
- افقی
+
Free
-
On line
- در خط
+
Above line
- بالاتر از خط
+
Below Line
-
Map orientation
-
Pie chart
-
Text diagram
-
Histogram
-
Height
- ارتفاع
+
x-height
-
Area
- منطقه
+
Diameter
-
None
- هیچ یک
+
Top
- بالا
+
Right
- راست
+
Bottom
- پایین
+
Left
- چپ
+
Unknown diagram type.
-
The diagram type '%1' is unknown. A default type is selected for you.
-
Bar length: Scale linearly, such as the following value matches the specified size.
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Transparency: %1%
-
Diagrams: No attributes added.
-
Interpolation value
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Background color
- رنگ پس زمینه
+
Pen color
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -22684,82 +22456,82 @@ p, li { white-space: pre-wrap; }
Display diagrams
-
Diagram type
-
Priority:
-
Low
- پایین
+
High
- بالا
+
Appearance
-
Background color
- رنگ پس زمینه
+
Line color
- رنگ خط
+
Line width
- عرض خط
+
Font...
-
Bar width
-
Transparency 0%
-
Start Angle
-
Only show diagrams with a size inside the specified range.
-
Hide diagrams with a size outside the specified range.
-
Scale dependent visibility
-
Size
- اندازه
+
Fixed size
-
Size units
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Attribute
-
Edit expression
-
Find maximum value
-
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
Increase size of small diagrams
-
Position
- موقعیت
+
Placement
- جایگذاری
+
Line Options
-
Distance
- فاصله
+
Data defined position
-
x
- x
+
y
- y
+
Automated placement settings
-
Options
-
Label placement
-
Bar Orientation
-
Up
- بالا
+
Down
- پايين
+
Right
- راست
+
Left
- چپ
+
Attributes
- خصوصیات
+
Available attributes
-
Add expression
-
Assigned attributes
-
Drag and drop to reorder
-
Color
- رنگ
+
@@ -23015,7 +22787,7 @@ Leave empty to automatically apply the maximum value.
%1 gon
-
@@ -23031,50 +22803,50 @@ Leave empty to automatically apply the maximum value.
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
Run layer action
-
Open form
-
Loading features...
-
Abort
-
Attribute table
-
%1 features loaded.
-
@@ -23082,17 +22854,17 @@ Parser error:
...
- ...
+
Expression
-
Column Preview
-
@@ -23100,12 +22872,12 @@ Parser error:
Form
- فرم
+
Dummy Text
-
@@ -23113,12 +22885,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -23126,57 +22898,57 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
-
...
- ...
+
No symbology
-
Feature symbology
-
Symbol layer symbology
-
Select all
- انتخاب همه
+
Unselect all
- عدم انتخاب همه
+
Export features intersecting the current map extent
-
@@ -23185,12 +22957,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -23198,52 +22970,52 @@ Parser error:
Symbol width
-
Symbol height
-
Rotation
-
Outline width
-
Fill color
-
Border color
-
Symbol name
-
Offset
- افست
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -23264,87 +23036,87 @@ Parser error:
Search method
-
Chain (fast)
-
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
FALP (fastest)
-
Number of candidates
-
Point
- نقطه
+
Line
- خطی
+
Polygon
- چند ضلعی
+
(i.e. including colliding objects)
-
Draw text as outlines (recommended)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
Show all labels and features for all layers
-
Automated Placement Engine
-
Show candidates (for debugging)
-
@@ -23360,35 +23132,35 @@ Parser error:
Dialog
- محاوره
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
Always show details
-
Details >>
-
@@ -23404,122 +23176,122 @@ p, li { white-space: pre-wrap; }
(String Concatenation)
-
Joins two values together into a string
-
Usage
-
'Dia' || Diameter
-
Search
- جستجو
+
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Parser Error
-
Eval Error
-
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
-
Load top 10 unique values
-
Load all unique values
-
@@ -23527,148 +23299,148 @@ p, li { white-space: pre-wrap; }
Form
- فرم
+
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Operators
-
Equal operator
-
=
-
Addition operator
-
+
-
Subtraction operator
-
-
-
Division operator
-
/
-
Multiplication operator
-
*
-
Power operator
-
^
-
String Concatenation
-
||
-
Open Bracket
-
(
-
Close Bracket
-
)
-
Output preview is generated <br> using the first feature from the layer.
-
Output preview:
-
Expression
-
@@ -23676,37 +23448,37 @@ p, li { white-space: pre-wrap; }
Select By Expression
-
Close
- بستن
+
...
- ...
+
Select
- انتخاب
+
Add to selection
-
Remove from selection
-
Select within selection
-
@@ -23714,22 +23486,22 @@ p, li { white-space: pre-wrap; }
layer
-
map view
-
user defined
-
Extent (current: %1)
-
@@ -23737,37 +23509,37 @@ p, li { white-space: pre-wrap; }
Form
- فرم
+
West
- غرب
+
East
- شرق
+
North
- شمال
+
South
- جنوب
+
Layer extent
-
Map view extent
-
@@ -23783,7 +23555,7 @@ p, li { white-space: pre-wrap; }
Dialog
- محاوره
+
@@ -23792,50 +23564,50 @@ p, li { white-space: pre-wrap; }
Not available for layer
-
Only update %1 selected features
-
Evaluation error
- خطا ارزیابی
+
Provider error
-
Could not add the new field to the provider.
-
Error
- خطا
+
An error occured while evaluating the calculation string:
%1
-
Please enter a field name
-
The expression is invalid see (more info) for details
-
@@ -23843,47 +23615,47 @@ p, li { white-space: pre-wrap; }
Field calculator
-
Only update selected features
-
Create a new field
-
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
- دقت
+
Update existing field
-
@@ -23891,7 +23663,7 @@ p, li { white-space: pre-wrap; }
Expression dialog
-
@@ -23899,19 +23671,19 @@ p, li { white-space: pre-wrap; }
Label
-
Id
-
Name
- نام
+
Type name
-
Length
- طول
+
Precision
- دقت
+
Comment
- توضیح
+
Edit widget
-
Alias
-
Layer
- لایه
+
Field
-
Name conflict
-
The attribute could not be inserted. The name already exists in the table.
-
Added attribute
-
Deleted attribute
- حذف ویژگیها
+
Line edit
-
Unique values
-
Unique values editable
-
Classification
-
Value map
-
Edit range
-
Slider range
-
Dial range
-
File name
-
Enumeration
-
Immutable
-
Hidden
-
Checkbox
-
Text edit
-
Calendar
-
Value relation
-
UUID generator
-
Photo
-
Web view
-
Color
- رنگ
+
Editor Widget
-
Select edit form
-
UI file
-
@@ -24101,18 +23873,18 @@ p, li { white-space: pre-wrap; }
Field calculator
-
Click to toggle table editing
-
Toggle editing mode
-
Ctrl+N
-
Fields
-
Ctrl+X
-
Relations
-
...
- ...
+
Edit UI
-
+
-
-
-
>
- >
+
^
-
v
-
Suppress attribute form pop-up after feature creation
-
Default
- پیش فرض
+
On
-
Off
-
Autogenerate
-
Drag and drop designer
-
Provide ui-file
-
Attribute editor layout:
-
Python Init function
-
@@ -24247,12 +24019,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
...
- ...
+
Select a file
-
@@ -24261,13 +24033,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
-
Map unit
-
@@ -24316,7 +24088,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Recenter
-
internal GPS
-
local gpsd
-
@@ -24347,12 +24119,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Are you sure?
-
Are you sure that you want to delete this device?
-
@@ -24360,111 +24132,111 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
GPS Device Editor
-
Devices
-
Delete
- حذف
+
New
- جدید
+
Update
- بروزرسانی
+
Device name
-
This is the name of the device as it will appear in the lists
-
Commands
-
Track download
-
Route upload
-
Waypoint download
-
The command that is used to download routes from the device
-
Route download
-
The command that is used to upload waypoints to the device
-
Track upload
-
The command that is used to download tracks from the device
-
The command that is used to upload routes to the device
-
The command that is used to download waypoints from the device
-
The command that is used to upload tracks to the device
-
Waypoint upload
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
-
@@ -24472,149 +24244,149 @@ p, li { white-space: pre-wrap; }
/gps
-
No path to the GPS port is specified. Please enter a path then try again.
-
Connecting...
- متصل شده ...
+
Connecting to GPS device...
-
Timed out!
-
Failed to connect to GPS device.
-
Connected!
-
Dis&connect
-
Connected to GPS device.
-
Error opening log file.
-
Disconnected...
-
&Connect
- &اتصال
+
Disconnected from GPS device.
-
%1 m
-
%1 km/h
-
Automatic
- اتوماتیک
+
Manual
- دستی
+
3D
- 3D
+
2D
- 2D
+
No fix
-
Differential
-
Non-differential
-
No position
-
Valid
-
Invalid
-
Not enough vertices
-
Cannot close a line feature until it has at least two vertices.
-
Cannot close a polygon feature until it has at least three vertices.
-
Feature added
-
Error
- خطا
+
The feature could not be added because removing the polygon intersections would change the geometry type
- ویژگی نمی تواند اضافه شود . دلیل آن از بین بردن تقاطع چند ضلعی نوع هندسی است
+
An error was reported during intersection removal
- خطا در هنگام حذف تقاطع گزارش شد
+
Cannot add feature. Unknown WKB type. Choose a different layer and try again.
-
Save GPS log file as
-
NMEA files
-
&Add feature
-
&Add Point
-
&Add Line
-
&Add Polygon
-
@@ -24685,12 +24457,12 @@ Errors: %2
GPS Connect
-
&Add feature
-
Add track point
-
Reset track
-
...
- ...
+
Signal
-
Satellite
-
latitude of position fix (degrees)
-
Longitude
-
longitude of position fix (degrees)
-
antenna altitude with respect to geoid (mean sea level)
-
Altitude
-
Latitude
-
Time of fix
-
date/time of position fix (UTC)
-
speed over ground
-
track direction (degrees)
-
Horizontal Dilution of Precision
-
HDOP
-
Vertical Dilution of Precision
-
VDOP
-
Position Dilution of Precision
-
PDOP
-
GPS receiver configuration 2D/3D mode: Automatic or Manual
-
position fix dimensions: 2D, 3D or No fix
-
Dimensions
-
quality of the position fix: Differential, Non-differential or No position
-
Quality
-
position fix status: Valid or Invalid
-
Status
-
number of satellites used in the position fix
-
Satellites
-
H accurancy
-
V accurancy
-
Connection
-
Autodetect
-
Serial device
-
Refresh serial device list
-
Host
- میزبان
+
Device
-
00000;
-
gpsd
-
Internal
-
Digitizing
- دیجیتالی نمودن
+
Track
-
Automatically add points
-
Track width in pixels
-
save layer after every feature added
-
Automatically save added feature
-
save GPS data (NMEA sentences) to a file
-
Log File
-
browse for log file
-
Map centering
-
when leaving
-
% of map extent
-
always
-
Cursor
-
Small
-
Large
-
@@ -25056,55 +24828,55 @@ gray = no data
&GPS Tools
-
&Create new GPX layer
-
Creates a new GPX layer and displays it on the map canvas
-
&GPS
-
Save new GPX file as...
-
GPS eXchange file
-
Could not create file
-
Unable to create a GPX file with the given name. Try again with another name or in another directory.
-
GPX Loader
-
Unable to read the selected file.
Please reselect a valid file.
-
Could not start process
-
Could not start GPSBabel!
-
Importing data...
-
Cancel
- لغو
+
Could not import data from %1!
-
Error importing data
-
Could not convert data from %1!
-
Error converting data
-
Not supported
-
This device does not support downloading of %1.
-
Downloading data...
-
Could not download data from GPS!
-
Error downloading data
-
This device does not support uploading of %1.
-
Uploading data...
-
Error while uploading data to GPS!
-
Error uploading data
-
@@ -25217,26 +24989,26 @@ Please reselect a valid file.
Waypoints
-
Routes
-
Tracks
-
Choose a file name to save under
-
GPS eXchange format
-
Select GPX file
-
Select file and format to import
-
Waypoints from a route
-
Waypoints from a track
-
Route from waypoints
-
Track from waypoints
-
GPS eXchange format (*.gpx)
-
@@ -25288,150 +25060,150 @@ Please reselect a valid file.
GPS Tools
- ابزار GPS
+
Load GPX file
-
File
- پرونده
+
Browse...
- فهرست...
+
Feature types
-
Waypoints
-
Routes
-
Tracks
-
Import other file
-
File to import
-
Feature type
-
Layer name
-
GPX output file
-
Save As...
- ذخیره به ...
+
(Note: Selecting correct file type in browser dialog important!)
-
Download from GPS
-
GPS device
-
Edit devices...
-
Port
- درگاه
+
Refresh
- به روز رسانی
+
Output file
-
Upload to GPS
-
Data layer
-
Edit devices
-
GPX Conversions
-
GPX input file
-
Conversion
- تبدیل
+
@@ -25439,17 +25211,17 @@ Please reselect a valid file.
Bad URI - you need to specify the feature type.
-
GPS eXchange file
-
Digitized in QGIS
-
@@ -25457,52 +25229,52 @@ Please reselect a valid file.
Dataset Description
-
Band %1
-
X: %1 Y: %2 Bands: %3
-
Dimensions
-
Origin
-
Pixel Size
-
Band
- باند
+
Format not supported
-
Cannot read data
-
Cannot get GDAL raster band: %1
-
@@ -25510,17 +25282,17 @@ Please reselect a valid file.
Define this layer's coordinate reference system:
-
This layer appears to have no projection specification.
-
By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.
-
@@ -25536,17 +25308,17 @@ Please reselect a valid file.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -25554,122 +25326,122 @@ Please reselect a valid file.
A5 (148x210 mm)
-
A4 (210x297 mm)
-
A3 (297x420 mm)
-
A2 (420x594 mm)
-
A1 (594x841 mm)
-
A0 (841x1189 mm)
-
B5 (176 x 250 mm)
-
B4 (250 x 353 mm)
-
B3 (353 x 500 mm)
-
B2 (500 x 707 mm)
-
B1 (707 x 1000 mm)
-
B0 (1000 x 1414 mm)
-
Legal (8.5x14 inches)
-
ANSI A (Letter; 8.5x11 inches)
-
ANSI B (Tabloid; 11x17 inches)
-
ANSI C (17x22 inches)
-
ANSI D (22x34 inches)
-
ANSI E (34x44 inches)
-
Arch A (9x12 inches)
-
Arch B (12x18 inches)
-
Arch C (18x24 inches)
-
Arch D (24x36 inches)
-
Arch E (36x48 inches)
-
Arch E1 (30x42 inches)
-
@@ -25677,73 +25449,73 @@ Please reselect a valid file.
Configure Georeferencer
-
Point tip
-
Show IDs
-
Show coords
-
Residual units
-
Pixels
-
Use map units if possible
-
PDF report
-
Left margin
-
mm
- میلی متر
+
Right margin
-
Show Georeferencer window docked
-
PDF map
-
Paper size
-
@@ -25751,16 +25523,16 @@ Please reselect a valid file.
Description georeferencer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
@@ -25778,44 +25550,44 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
All other files (*)
-
Open raster
-
%1 is not a supported raster data source
-
Unsupported Data Source
-
Raster loaded: %1
-
Georeferencer - %1
-
Transform:
-
Info
- اطلاعات
+
GDAL scripting is not supported for %1 transformation
-
Load GCP points
-
GCP file
-
No GCP points to save
-
Save GCP points
-
Please load raster to be georeferenced
-
Help
- راهنما
+
Panels
- پنلها
+
Toolbars
- نوار ابزار
+
Current transform parametrisation
-
Coordinate:
-
Current map coordinate
- مختصال جاری نقشه
+
None
- هیچ یک
+
Coordinate of image(column/line)
-
Unable to open GCP points file %1
-
Save GCPs
-
Save GCP points?
-
Failed to get linear transform parameters
-
World file exists
-
<p>The selected file already seems to have a world file! Do you want to replace it with the new world file?</p>
-
Failed to compute GCP transform: Transform is not solvable
-
Error
- خطا
+
Could not write to %1
-
map units
-
pixels
- پیکسل
+
Transformation parameters
-
Translation x
-
Translation y
-
Scale x
-
Scale y
-
Rotation [degrees]
-
Mean error [%1]
-
Residuals
-
yes
- بلی
+
no
- خیر
+
Translation (%1, %2)
-
Scale (%1, %2)
-
Rotation: %1
-
Mean error: %1
-
Copy in clipboard
-
%1
-
GDAL script
-
Please set transformation type
-
Please set output raster name
-
%1 requires at least %2 GCPs. Please define more
-
Linear
-
Helmert
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin plate spline (TPS)
-
Projective
-
Not set
-
@@ -26111,221 +25883,221 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
File
- پرونده
+
View
-
Edit
- ویرایش
+
Settings
- تنظیمات
+
GCP table
-
toolBar
-
Open raster
-
Ctrl+O
-
Zoom In
- بزرگنمایی به داخل
+
Ctrl++
-
Zoom Out
- بزرگنمایی به خارج
+
Ctrl+-
-
Zoom to Layer
- نمایش لایه
+
Ctrl+Shift+F
-
Pan
-
Transformation settings
-
Add point
-
Ctrl+A
-
Delete point
-
Ctrl+D
-
Quit
- خروج
+
Start georeferencing
-
Ctrl+G
-
Generate GDAL script
-
Ctrl+C
-
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
Save GCP points as...
-
Ctrl+S
-
Load GCP points
-
Ctrl+L
-
Configure Georeferencer
-
Ctrl+P
-
Raster properties
-
Move GCP point
-
Zoom Next
- نمایش حالت بعدی
+
Zoom Last
- نمایش حالت قبلی
+
Local histogram stretch
-
Full histogram stretch
- کشش کامل هیستوگرام
+
@@ -26354,7 +26126,7 @@ p, li { white-space: pre-wrap; }
Invalid Path: The file is either unreadable or does not exist
-
Do you want to add the datasource anyway?
-
Globe Settings
-
Elevation
-
Raster
- رستر
+
TMS
-
URL/File
-
...
- ...
+
Up
- بالا
+
Map
- نقشه
+
Base Layer
-
URL
- مسیر
+
TextLabel
- برچسب متن
+
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Down
- پايين
+
Add
- اضافه
+
Remove
- حذف
+
Cache
-
Path
- مسیر
+
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Model
-
Point Layer
-
3D Model
-
Stereo
-
Stereo Mode
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -26593,32 +26365,32 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Abort
-
Error: %1 on line %2, column %3
-
WFS
-
GML Getfeature network request failed with error: %1
-
Network
- شبکه
+
@@ -26626,7 +26398,7 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
@@ -26634,90 +26406,90 @@ p, li { white-space: pre-wrap; }
Millimeter
-
Map unit
-
Color (start)
-
Color (end)
-
Angle
- زاویه
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
QgsGraduatedSymbolRendererV2Model
- Symbol
-
- Value
مقدار
- Label
-
@@ -26730,120 +26502,120 @@ p, li { white-space: pre-wrap; }
Symbol
-
Change...
-
Classes
- کلاس
+
Color ramp
-
Mode
- حالت
+
Equal Interval
-
Quantile (Equal Count)
-
Natural Breaks (Jenks)
-
Standard Deviation
-
Pretty Breaks
-
Invert
-
Classify
-
Add class
-
Delete
- حذف
+
Delete all
-
Advanced
-
- Symbol levels...
- سطوح نماد ...
+
- Error
- خطا
+
- There are no available color ramps. You can add them in Style Manager.
-
- The selected color ramp is not available.
-
- Warning
- هشدار
+
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
-
- Renderer creation has failed.
-
@@ -26866,22 +26638,22 @@ Press cancel to abort breaks calculation or OK to continue.
Layer
- لایه
+
Warning
- هشدار
+
ERROR
-
OK
- تایید
+
@@ -26889,22 +26661,22 @@ Press cancel to abort breaks calculation or OK to continue.
GRASS Attributes
-
Tab 1
-
result
-
Update database record
-
Add new category using settings in GRASS Edit toolbox
-
New
- جدید
+
Delete selected category
-
Delete
- حذف
+
@@ -26937,49 +26709,49 @@ Press cancel to abort breaks calculation or OK to continue.
Tools
-
Add selected map to canvas
-
Copy selected map
-
Rename selected map
-
Delete selected map
-
Set current region to selected map
-
Refresh
- به روز رسانی
+
New name
-
New name for layer "%1"
-
Warning
- هشدار
+
Cannot copy map %1@%2
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot rename map %1
-
Information
- اطلاعات
+
Remove the selected layer(s) from canvas before continue.
-
Question
-
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
-
+
Cannot delete map %1
-
Cannot write new region
-
@@ -27055,212 +26825,212 @@ Press cancel to abort breaks calculation or OK to continue.
Warning
- هشدار
+
You are not owner of the mapset, cannot open the vector for editing.
-
Cannot open vector for update.
-
Edit tools
-
New point
- نقطه جدید
+
New line
-
New boundary
-
New centroid
- نقطه جدید مرکری
+
Move vertex
-
Add vertex
-
Delete vertex
- حذف راس
+
Move element
-
Split line
-
Delete element
-
Edit attributes
-
Close
- بستن
+
Background
-
Highlight
-
Dynamic
-
Point
- نقطه
+
Line
- خطی
+
Boundary (no area)
-
Boundary (1 area)
-
Boundary (2 areas)
-
Centroid (in area)
-
Centroid (outside area)
-
Centroid (duplicate in area)
-
Node (1 line)
-
Node (2 lines)
-
Next not used
-
Manual entry
-
No category
-
Info
- اطلاعات
+
The table was created
-
Tool not yet implemented.
-
Cannot check orphan record: %1
-
Orphan record was left in attribute table. <br>Delete the record?
-
Cannot delete orphan record:
-
Cannot describe table for field %1
-
Left: %1
-
-- Middle: %1
-
-- Right: %1
-
@@ -27297,59 +27067,59 @@ Press cancel to abort breaks calculation or OK to continue.
GRASS Edit
-
Category
-
Mode
- حالت
+
Layer
- لایه
+
Settings
- تنظیمات
+
Snapping in screen pixels
-
Symbology
-
Line width
- عرض خط
+
Marker size
- اندازه نشانگر
+
Disp
-
Color
- رنگ
+
Index
-
Table
- جدول
+
Length
- طول
+
Create / Alter Table
-
@@ -27531,32 +27301,32 @@ Press cancel to abort breaks calculation or OK to continue.
Cancel
- لغو
+
Ok
-
<font color='red'>Enter a name!</font>
-
<font color='red'>This is name of the source!</font>
-
<font color='red'>Exists!</font>
-
Overwrite
-
@@ -27564,300 +27334,300 @@ Press cancel to abort breaks calculation or OK to continue.
Mapcalc tools
-
Add map
-
Add constant value
-
Add operator or function
-
Add connection
-
Select item
-
Delete selected item
-
Open
-
Save
-
Save as
-
Addition
-
Subtraction
-
Multiplication
-
Division
-
Modulus
-
Exponentiation
-
Equal
-
Not equal
-
Greater than
-
Greater than or equal
-
Less than
-
Less than or equal
-
And
-
Or
-
Absolute value of x
-
Inverse tangent of x (result is in degrees)
-
Inverse tangent of y/x (result is in degrees)
-
Current column of moving window (starts with 1)
-
Cosine of x (x is in degrees)
-
Convert x to double-precision floating point
-
Current east-west resolution
-
Exponential function of x
-
x to the power y
-
Convert x to single-precision floating point
-
Decision: 1 if x not zero, 0 otherwise
-
Decision: a if x not zero, 0 otherwise
-
Decision: a if x not zero, b otherwise
-
Decision: a if x > 0, b if x is zero, c if x < 0
-
Convert x to integer [ truncates ]
-
Check if x = NULL
-
Natural log of x
-
Log of x base b
-
Largest value
-
Median value
-
Smallest value
-
Mode value
-
1 if x is zero, 0 otherwise
-
Current north-south resolution
-
NULL value
-
Random value between a and b
-
Round x to nearest integer
-
Current row of moving window (Starts with 1)
-
Sine of x (x is in degrees)
sin(x)
-
Square root of x
sqrt(x)
-
Tangent of x (x is in degrees)
tan(x)
-
Current x-coordinate of moving window
-
Current y-coordinate of moving window
-
Output
- خروجی
+
Warning
- هشدار
+
Cannot get current region
-
Cannot check region of map %1
-
Cannot get region of map %1
-
No GRASS raster maps currently in QGIS
-
Cannot create 'mapcalc' directory in current mapset.
-
New mapcalc
-
Enter new mapcalc name:
-
Enter vector name
-
The file already exists. Overwrite?
-
Save mapcalc
-
File name empty
-
Cannot open mapcalc file
-
The mapcalc schema (%1) not found.
-
Cannot open mapcalc schema (%1)
-
Cannot read mapcalc schema (%1):
-
%1
at line %2 column %3
-
@@ -27977,7 +27747,7 @@ at line %2 column %3
Module: %1
-
Warning
- هشدار
+
The module file (%1) not found.
-
Cannot open module file (%1)
-
Cannot read module file (%1)
-
%1
at line %2 column %3
-
Module %1 not found
-
Cannot find man page %1
-
Please ensure you have the GRASS documentation installed.
-
Not available, description not found (%1)
-
Not available, cannot open description (%1)
-
Not available, incorrect description (%1)
-
Run
- اجرا
+
Cannot get input region
-
Input %1 outside current region!
-
Use Input Region
-
Output %1 exists! Overwrite?
-
Cannot find module %1
-
Cannot start module: %1
-
Stop
-
<B>Successfully finished</B>
-
<B>Finished with error</B>
-
<B>Module crashed or killed</B>
-
@@ -28111,17 +27881,17 @@ at line %2 column %3
GRASS Module
-
Options
-
Output
- خروجی
+
TextLabel
- برچسب متن
+
Close
- بستن
+
@@ -28164,7 +27934,7 @@ at line %2 column %3
'layer' attribute in field tag with key= %1 is missing.
-
@@ -28172,17 +27942,17 @@ at line %2 column %3
File
- پرونده
+
%1: missing value
- %1 :  ; ارزش از دست رفته
+
%1: directory does not exist
-
@@ -28190,44 +27960,44 @@ at line %2 column %3
OGR/PostGIS/GDAL Input
-
Warning
- هشدار
+
Cannot find layeroption %1
-
Cannot find whereoption %1
-
Password
- کلمه عبور
+
Select a layer
- انتخاب یک لایه
+
PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
-
%1: no input
-
@@ -28235,7 +28005,7 @@ at line %2 column %3
Input
- ورودي
+
Warning
- هشدار
+
Cannot find typeoption %1
-
Cannot find values for typeoption %1
-
Cannot find layeroption %1
-
GRASS element %1 not supported
-
Use region of this map
-
Select a layer
- انتخاب یک لایه
+
%1 (band %2)
-
Cannot get provider
-
%1: no input
-
@@ -28299,17 +28069,17 @@ at line %2 column %3
Browse
- جستجو
+
Output file
-
GeoTIFF
-
Cannot parse version_min %1
-
Cannot parse version_max %1
-
Warning
- هشدار
+
Cannot find module %1
-
Cannot start module %1
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot read module description (%1):
-
%1
at line %2 column %3
-
Region
-
Input layers
-
Current map canvas
-
Cannot find key %1
-
<< Hide advanced options
-
Show advanced options >>
-
Item with key %1 not found
-
Item with id %1 not found
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
-
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
Cannot set region of map %1
-
@@ -28480,60 +28250,60 @@ at line %2 column %3
Database
- پایگاه داده
+
Location 1
-
System mapset
-
User's mapset
-
Location 2
-
Enter path to GRASS database
-
The directory doesn't exist!
-
No writable locations, the database is not writable!
-
Enter location name!
-
The location exists!
-
Selected projection is not supported by GRASS!
-
Warning
- هشدار
+
Cannot create projection.
-
Cannot reproject previously set region, default region set.
-
North must be greater than south
-
East must be greater than west
-
Regions file (%1) not found.
-
Cannot open locations file (%1)
-
Cannot read locations file (%1):
-
%1
at line %2 column %3
-
Cannot create QgsCoordinateReferenceSystem
-
Cannot reproject selected region.
-
Cannot reproject region
-
Enter mapset name.
-
The mapset already exists
-
Database:
-
Location:
-
Mapset:
-
Create location
-
Cannot create new location: %1
-
Create mapset
-
Cannot create new mapset directory
-
Cannot open DEFAULT_WIND
-
Cannot open WIND
-
New mapset
-
New mapset successfully created, but cannot be opened: %1
-
New mapset successfully created and set as current working mapset.
-
@@ -28689,211 +28459,211 @@ at line %2 column %3
New Mapset
-
GRASS Database
-
Tree
-
Comment
- توضیح
+
Example directory tree:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
-
Database Error
- خطاي پايگاه داده
+
Database:
-
Browse...
- فهرست...
+
Select existing directory or create a new one:
-
GRASS Location
-
Location
- محل
+
Select location
-
Create new location
-
Location Error
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
-
Projection
-
Projection Error
-
Coordinate system
-
Not defined
-
Default GRASS Region
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
-
Set current QGIS extent
-
Set
-
Region Error
-
S
-
W
-
E
-
N
-
Mapset
-
New mapset:
-
Mapset Error
-
<p align="center">Existing mapsets</p>
-
Owner
- مالک
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
-
Create New Mapset
-
Location:
-
Mapset:
-
@@ -28901,102 +28671,102 @@ p, li { white-space: pre-wrap; }
GrassVector
-
0.1
- 0.1
+
GRASS layer
-
Plugins
- پلاگینها
+
Add GRASS raster layer
-
Open GRASS tools
-
Display Current Grass Region
-
Edit Current Grass Region
-
Edit Grass Vector layer
-
Open Mapset
-
New Mapset
-
Close Mapset
-
Add GRASS Vector Layer
-
Adds a GRASS vector layer to the map canvas
-
Adds a GRASS raster layer to the map canvas
-
Open GRASS Tools
-
Displays the current GRASS region as a rectangle on the map canvas
-
Edit the current GRASS region
-
Edit the currently selected GRASS vector layer.
-
Create New Grass Vector
-
&GRASS
-
GRASS
-
Warning
- هشدار
+
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
Cannot open GRASS vector:
%1
-
GRASS Edit is already running.
-
New vector name
-
Cannot create new vector: %1
-
New vector created but cannot be opened by data provider.
-
Cannot start editing.
-
Cannot open vector for update.
-
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot open the mapset. %1
-
Cannot close mapset. %1
-
Cannot close current mapset. %1
-
Cannot open GRASS mapset. %1
-
@@ -29130,7 +28900,7 @@ p, li { white-space: pre-wrap; }
GRASS vector map %1 does not have topology. Build topology?
-
@@ -29138,22 +28908,22 @@ p, li { white-space: pre-wrap; }
cellhd file %1 does not exist
-
Groups not yet supported
-
Format not supported
-
Cannot read data
-
@@ -29168,12 +28938,12 @@ p, li { white-space: pre-wrap; }
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
GRASS Region Settings
-
Extent
- حوزه
+
North
- شمال
+
West
- غرب
+
East
- شرق
+
South
- جنوب
+
Select the extent by dragging on canvas
or change the following values
-
Resolution
-
Cell width
-
Cell height
-
Rows
- سطر
+
Border
-
Color
- رنگ
+
Width
- عرض
+
@@ -29265,22 +29035,22 @@ or change the following values
Select GRASS Vector Layer
-
Select GRASS Raster Layer
-
Select GRASS mapcalc schema
-
Select GRASS Mapset
-
Add GRASS Layer
-
Gisdbase
-
Location
- محل
+
Mapset
-
Map name
-
Select or type map name (wildcards '*' and '?' accepted for rasters)
-
Layer
- لایه
+
Browse...
- فهرست...
+
@@ -29391,48 +29161,48 @@ or change the following values
GRASS Tools
-
GRASS Tools: %1/%2
-
GRASS Direct Tools
-
Modules Tree
-
Modules List
-
Browser
-
Direct Modules Tree
-
Direct Modules List
-
Cannot start command shell (%1)
-
Warning
- هشدار
+
GRASS Shell is not compiled.
-
The config file (%1) not found.
-
Cannot open config file (%1).
-
Cannot read config file (%1):
-
%1
at line %2 column %3
-
@@ -29475,39 +29245,39 @@ at line %2 column %3
Grass Tools
-
Modules Tree
-
1
- 1
+
Modules List
-
Filter
- فیلتر
+
Direct Modules Tree
-
Direct Modules List
-
@@ -29515,60 +29285,60 @@ at line %2 column %3
Add feature
- اضافه نمودن موجودیت
+
Start editing failed
- ویرایش شروع نشد
+
Provider cannot be opened for editing
- ارائه دهنده خدمات برای ویرایش اجرا نمی شود
+
Stop editing
- توقف ویرایش
+
Do you want to save the changes to layer %1?
- آیا شما می خواهید تغییرات در لایه ذخیره شود %1؟
+
Error
- خطا
+
Problems during roll back
- مشکلات در هنگام برگشت
+
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
-
Show more
-
@@ -29576,12 +29346,12 @@ at line %2 column %3
Browse
- جستجو
+
Layer name
-
Provider
- ارائه دهنده خدمات
+
Datasource
-
none
-
Select file to replace '%1'
-
Please select exactly one file.
-
Select new directory of selected files
-
All files (*)
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -29652,12 +29420,12 @@ at line %2 column %3
Handle bad layers
- دسته لایه های بد
+
%1 of %2 bad layers were not fixable.
-
@@ -29665,7 +29433,7 @@ at line %2 column %3
QGIS Help
-
@@ -29673,7 +29441,7 @@ at line %2 column %3
QGIS Help
-
HTML annotation
-
WMS Server responded unexpectedly with HTTP Status Code %1 (%2)
-
Received %1 of %2 bytes
-
Received %1 bytes (total unknown)
-
HTTP response completed, however there was an error: %1
-
HTTP transaction completed, however there was an error: %1
-
Not connected
-
Looking up '%1'
-
Connecting to '%1'
-
Sending request '%1'
-
Receiving reply
-
Response is complete
-
Closing down connection
-
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
-
+
@@ -29776,12 +29542,12 @@ This may be a problem in your network connection or at the WMS server.
Dialog
- محاوره
+
Distance coefficient P
-
@@ -29794,27 +29560,27 @@ This may be a problem in your network connection or at the WMS server.
Layer
- لایه
+
FID
-
Attribute
-
Value
-
Expand tree.
-
...
- ...
+
Clear Results
-
Help
- راهنما
+
Select identify mode
-
Mode
- حالت
+
Select view mode for raster layers
-
View
-
Auto open form
-
Collapse tree.
-
New results will be expanded by default.
-
Copy selected feature to clipboard.
-
Print selected HTML response.
-
@@ -29888,12 +29654,12 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
- شناسایی نمایش نتایج
+
Feature
-
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
(Derived)
-
Edit feature form
-
View feature form
-
Table
- جدول
+
Tree
-
Graph
-
feature id
- شناسه ویژگی
+
Format
- قالب
+
No attributes.
-
Zoom to feature
- بزرگ نمايي به عارضه
+
Copy feature
-
Toggle feature selection
-
Copy attribute value
-
Copy feature attributes
-
Copy GetFeatureInfo request URL
-
Clear results
-
Clear highlights
-
Highlight all
-
Highlight layer
-
Activate layer
-
Layer properties...
-
Expand all
-
Collapse all
-
Attributes changed
- ویژگیهای تغییر داده شده
+
Cannot print
-
Cannot print this item
-
@@ -30068,7 +29834,7 @@ This may be a problem in your network connection or at the WMS server.
Print
-
@@ -30076,7 +29842,7 @@ This may be a problem in your network connection or at the WMS server.
Loading...
-
@@ -30093,55 +29859,55 @@ This may be a problem in your network connection or at the WMS server.
Triangular interpolation (TIN)
-
Inverse Distance Weighting (IDW)
-
No input data for interpolation
-
Please add one or more input layers
-
Output file name invalid
-
Please enter a valid output file name
-
Break lines
-
Structure lines
-
Points
- نقطه
+
Save interpolated raster as...
-
@@ -30149,47 +29915,47 @@ This may be a problem in your network connection or at the WMS server.
Interpolation plugin
-
Input
- ورودي
+
Vector layers
-
Interpolation attribute
-
Use z-Coordinate for interpolation
-
Add
- اضافه
+
Remove
- حذف
+
Vector layer
-
Attribute
-
Output
- خروجی
+
Interpolation method
- روش الحاق
+
...
- ...
+
Number of columns
-
Number of rows
-
Cellsize X
-
Cellsize Y
-
X min
-
X max
-
Y min
-
Y max
-
Set to current extent
-
Output file
-
Add result to project
-
@@ -30284,7 +30050,7 @@ This may be a problem in your network connection or at the WMS server.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -30292,17 +30058,17 @@ This may be a problem in your network connection or at the WMS server.
Form
- فرم
+
Sub renderer:
-
Merge polygons before rendering (slow)
-
@@ -30336,23 +30102,23 @@ This may be a problem in your network connection or at the WMS server.
Form1
-
Label Properties
-
Placement
- جایگذاری
+
Below Right
-
Below
-
Over
-
Above
-
Below Left
-
Above Right
-
Above Left
-
Use scale dependent rendering
-
Buffer labels
-
Buffer size
-
In points
-
In map units
-
Color
- رنگ
+
%
- %
+
Transparency
-
Offset
- افست
+
X offset
-
Y offset
-
Basic label options
-
Field containing label
-
Default label
-
Font size
-
Angle (deg)
-
°
-
Multiline labels?
-
Label only selected features
-
Advanced
-
Data defined placement
-
Data defined properties
-
&Font family
-
&Bold
-
&Italic
-
&Underline
-
&Size
-
Size units
-
&Color
-
Strikeout
-
Data defined buffer
-
Transparency:
-
Size:
-
Data defined position
-
X Coordinate
- مختصاتX
+
Y Coordinate
- مختصاتY
+
X Offset (pts)
-
Y Offset (pts)
-
Preview:
-
QGIS Rocks!
-
@@ -30621,7 +30387,7 @@ This may be a problem in your network connection or at the WMS server.
Expression result
-
Available typeface styles
- سبک حروف موجود
+
Style
- سبک
+
Underlined text
-
U
-
Strikeout text
- متن خارج شده
+
S
-
Bold text
(data defined only, overrides Style)
-
B
-
Italic text
(data defined only, overrides Style)
-
I
-
Ignores priority and permits collisions/overlaps
-
Always show (exceptions above)
-
points
-
map units
-
mm
-
% of length
-
%1 not found. Default substituted.
-
Chosen font
-
string
-
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
-
int [0-2000]
-
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
-
int [1-10000]
-
Text/Buffer sample
-
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
No change
-
All uppercase
-
All lowercase
-
Capitalize first letter
-
Size%1
-
X
-
File not found
-
@@ -30960,7 +30726,7 @@ This may be a problem in your network connection or at the WMS server.
تنظیمات برچسب لایه
- Label this layer with
برچسب این لایه با
@@ -31040,22 +30806,22 @@ This may be a problem in your network connection or at the WMS server.
...
...
@@ -31063,7 +30829,7 @@ This may be a problem in your network connection or at the WMS server.
Lorem Ipsum
-
Line direction symbol
-
خطوط چندگانه
- Automated placement settings (apply to all layers)
-
Text/Buffer Sample
-
Text
- متن
+
Formatting
-
Shadow
-
Rendering
- رندر
+
letter
-
Spacing
-
Blend mode
-
word
-
Underlined text
-
Bold text
(data defined only, overrides Style)
-
B
-
Italic text
(data defined only, overrides Style)
-
I
-
Font is missing.
-
Text formatting
-
Alignment
هم ترازی
@@ -31256,17 +31022,17 @@ This may be a problem in your network connection or at the WMS server.
Force point inside polygon
-
Repeat
-
- Discourage labels from covering features
-
U
-
S
-
حائل
- Labels will not show if larger than this on screen
-
- px
پيکسل
- Data defined
-
- X
- X
+
- Y
- Y
+
- Coordinate
-
- Preserve data rotation values
-
- horizontal
افقی
- vertical
عمودی
- Label options
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
- Maximum
حداکثر مقدار
- Pixel size-based visibility (labels in map units)
-
- Labels will not show if smaller than this on screen
-
- Minimum
به حداقل رساندن
<
-
- Scale-based visibility
دید مقیاس مبتنی بر
@@ -31464,7 +31230,7 @@ This may be a problem in your network connection or at the WMS server.
left/right
-
Reverse direction
-
- Priority
اولویت
- Low
پایین
- High
بالا
@@ -31519,88 +31285,88 @@ This may be a problem in your network connection or at the WMS server.
Text buffer
-
Draw text buffer
-
Color buffer's fill
-
Draw background
-
Size X
-
Size type
-
Size Y
-
Fill color
-
Border color
-
Draw drop shadow
-
Blur radius
-
Blur only alpha pixels
-
Label's rotation is ignored
-
Use global shadow
-
˚
-
Lowest label component
-
Draw under
-
Rotation
زاویه
@@ -31672,7 +31438,7 @@ This may be a problem in your network connection or at the WMS server.
Centroid
-
abc
-
Quadrant
-
Distance
- فاصله
+
- outside
خارج
- inside
داخل
- Maximum angle between curved characters
-
Pen join style
-
Drop shadow
-
Offset
- افست
+
Scale
- مقیاس
+
Background
-
Load symbol parameters
-
Fixed
-
Offset X,Y
- افست X,Y
+
Rectangle
-
Square
- چارگوش
+
Ellipse
-
Circle
-
SVG
-
Shape
-
Sync with label
-
Offset of label
-
Radius X,Y
-
Border width
- عرض حاشیه
+
symbol units
-
- Merge connected lines to avoid duplicate labels
ادغام خطوط متصل برای جلوگیری از برچسب های تکراری
- Label every part of multi-part features
برچسب هر بخشی از ویژگی های چند بخشی
- Feature options
-
- Suppress labeling of features smaller than
سرکوب برچسب زدن از ویژگی های کوچکتر از
- mm
میلی متر
- Show all labels for this layer (including colliding labels)
-
- Show upside-down labels
-
- never
هرگز
- when rotation defined
-
- always
-
- Limit number of features to be labeled to
-
- Number of features sent to labeling engine, though not all may be labeled
-
موقعیت
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
-
- Show label
نمایش برچسب
@@ -31904,15 +31670,15 @@ This may be a problem in your network connection or at the WMS server.
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -31920,60 +31686,60 @@ not displayed
&Add Group
-
&Remove
-
&Show in overview
-
Re&name
-
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
QgsLegendModel
- Group
گروه
- No Legend Available
-
@@ -31982,33 +31748,33 @@ not displayed
Millimeter
-
Map unit
-
Angle
- زاویه
+
Distance
- فاصله
+
Line width
- عرض خط
+
Color
- رنگ
+
@@ -32016,23 +31782,23 @@ not displayed
Styles related to the layer
-
Other styles on the database
-
Cancel
- لغو
+
Load Style
-
@@ -32040,58 +31806,58 @@ not displayed
Select all
- انتخاب همه
+
Clear selection
-
Select connections to import
-
Import
-
Export
-
Export/import error
-
You should select at least one connection from list.
-
Save connections
-
XML files (*.xml *.XML)
- XML files (*.xml *.XML)
+
Saving connections
-
Cannot write file %1:
%2.
-
Loading connections
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an WMS connections exchange file.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an PostGIS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Connection with name '%1' already exists. Overwrite?
-
@@ -32185,31 +31951,31 @@ not displayed
Manage connections
-
Select connections to export
-
QgsMapCanvas
- canvas
-
- Rendering
- رندر
+
- Canvas refresh: %1 ms
-
@@ -32254,95 +32020,95 @@ not displayed
Specify CRS for layer %1
-
%1 at line %2 column %3
-
Error: qgis element could not be found in %1
-
Loading style file %1 failed because:
%2
-
Could not save symbology because:
%1
-
The directory containing your dataset needs to be writable!
-
Style not found in database
-
Created default style file as %1
-
ERROR: Failed to created default style file as %1. Check file permissions and retry.
-
User database could not be opened.
-
The style table could not be created.
-
The style %1 was saved to database
-
The style %1 was updated in the database.
-
The style %1 could not be updated in the database.
-
The style %1 could not be inserted into database.
-
ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
Unable to open file %1
-
@@ -32439,12 +32205,12 @@ not displayed
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
@@ -32453,53 +32219,53 @@ not displayed
No feature selected. Please select a feature with the selection tool or in the attribute table
-
Several features are selected. Please select only one feature to which an part should be added.
-
Part added
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected feature is not multi part.
-
New part's geometry is not valid.
-
New polygon ring not disjoint with existing polygons.
-
Several features are selected. Please select only one feature to which an island should be added.
-
Selected geometry could not be found
-
@@ -32507,52 +32273,52 @@ not displayed
Coordinate transform error
- خطا تبدیل مختصات
+
Cannot transform the point to the layers coordinate system
- نقطه به لایه سیستم مختصات قابل تبدیل نیست
+
Ring added
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32573,7 +32339,7 @@ not displayed
Changed properties for label
-
@@ -32594,12 +32360,12 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
No active vector layer
-
Layer not editable
- لایه ویرایش نشده است
+
@@ -32654,52 +32420,52 @@ not displayed
Coordinate transform error
- خطا تبدیل مختصات
+
Cannot transform the point to the layers coordinate system
- نقطه به لایه سیستم مختصات قابل تبدیل نیست
+
Ring added and filled
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32707,7 +32473,7 @@ not displayed
All (%1)
-
Identify error
-
@@ -32799,7 +32565,7 @@ not displayed
No features at this position found.
- هیچ ویژگی در این موقعیت وجود نداشت.
+
@@ -32823,7 +32589,7 @@ not displayed
could not snap to a segment on the current layer.
-
Offset curve
-
Offset:
-
Geometry error
-
Creating offset geometry failed
-
@@ -32859,12 +32625,12 @@ not displayed
Pinned label
-
Unpinned label
-
@@ -32872,12 +32638,12 @@ not displayed
Coordinate transform error
- خطا تبدیل مختصات
+
Cannot transform the point to the layers coordinate system
- نقطه به لایه سیستم مختصات قابل تبدیل نیست
+
No point feature was detected at the clicked position. Please click closer to the feature or enhance the search tolerance under Settings->Options->Digitizing->Serch radius for vertex edits
-
The active point layer does not have a rotation attribute
-
Hid labels
-
Showed labels
-
@@ -32947,23 +32713,23 @@ not displayed
Geometry simplified
-
Unsupported operation
-
Multipart features are not supported for simplification.
-
This feature cannot be simplified. Check if feature has enough vertices to be simplified.
-
@@ -32971,49 +32737,49 @@ not displayed
Coordinate transform error
- خطا تبدیل مختصات
+
Cannot transform the point to the layers coordinate system
- نقطه به لایه سیستم مختصات قابل تبدیل نیست
+
Features split
-
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
No feature split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
@@ -33021,53 +32787,53 @@ not displayed
Coordinate transform error
- خطا تبدیل مختصات
+
Cannot transform the point to the layers coordinate system
- نقطه به لایه سیستم مختصات قابل تبدیل نیست
+
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Split error
-
@@ -33075,22 +32841,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
@@ -33100,39 +32866,39 @@ not displayed
Millimeter
-
Map unit
-
Interval
-
Line offset
- انحراف خط
+
Placement
- جایگذاری
+
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -33158,67 +32924,67 @@ not displayed
&New
- &جدید
+
The calculations are based on:
-
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
@@ -33226,12 +32992,12 @@ not displayed
Incorrect measure results
-
<p>This map is defined with a geographic coordinate system (latitude/longitude) but the map extents suggests that it is actually a projected coordinate system (e.g., Mercator). If so, the results from line or area measurements will be incorrect.</p><p>To fix this, explicitly set an appropriate map coordinate system using the <tt>Settings:Project Properties</tt> menu.
-
@@ -33255,42 +33021,42 @@ not displayed
Date
- زمان
+
Whole number (smallint - 16bit)
-
Whole number (integer - 32bit)
-
Whole number (integer - 64bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (double)
-
Text, unlimited length (text)
-
@@ -33298,17 +33064,17 @@ not displayed
Skip attribute
-
Id
-
Merge
- ادغام
+
Median
- میانه
+
Sum
- مجموع
+
Concatenation
-
Mean
- میانگین
+
Skipped
-
@@ -33374,12 +33140,12 @@ not displayed
Remaining messages
-
Close all
-
%n more
unread messages
-
-
+
@@ -33400,7 +33164,7 @@ not displayed
QGIS Log
-
General
- عمومی
+
Timestamp
-
Show non-spatial tables
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Test connection
- آزمون اتصال
+
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
اتصال برقرار نشد - نام میزبان مشخص نشده است.
@@ -33537,7 +33301,7 @@ not displayed
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
اتصال شکست خورد - نام پایگاه داده شده است مشخص نشده است.
@@ -33554,82 +33318,82 @@ not displayed
Create a New MSSQL connection
-
Connection Information
-
Name
- نام
+
Provider/DSN
-
Host
- میزبان
+
Database
- پایگاه داده
+
Username
- کاربری
+
Password
- کلمه عبور
+
Name of the new connection
-
Trusted Connection
-
Save Username
-
&Test Connect
-
Save Password
-
Only look in the geometry_columns metadata table
-
Also list tables with no geometry
- لیست جداول بدون هندسه
+
Use estimated table parameters
-
@@ -33637,72 +33401,72 @@ not displayed
8 Bytes integer
-
4 Bytes integer
-
2 Bytes integer
-
1 Bytes integer
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
- اعداد اعشاری ( اعشاری )
+
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length (text)
-
Text, unlimited length unicode (ntext)
-
@@ -33731,52 +33495,52 @@ not displayed
Add MSSQL Table(s)
-
&Add
- &اضافه
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Schema
- طرح
+
Table
- جدول
+
Primary key column
- ستون کليد اصلي
+
SRID
- SRID
+
Sql
- اس کیو ال
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
MSSQL Provider
-
Stop
-
Connect
-
@@ -33868,47 +33632,47 @@ not displayed
Schema
- طرح
+
Table
- جدول
+
Type
- نوع
+
Geometry column
-
SRID
- SRID
+
Primary key column
- ستون کليد اصلي
+
Select at id
-
Sql
- اس کیو ال
+
Detecting...
-
Select...
- انتخاب ...
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Enter...
- انتخاب ...
+
Point
- نقطه
+
Multipoint
- تعدادی نقطه
+
Line
- خطی
+
Multiline
- تعدادی خط
+
Polygon
- چند ضلعی
+
Multipolygon
- تعدادی چند ضلعی
+
No Geometry
-
Unknown Geometry
-
@@ -33976,42 +33740,42 @@ not displayed
Not set
-
No enhancement
- هیچ ارتقاء
+
Stretch to MinMax
- کشش به حداقل حداکثر
+
Stretch and clip to MinMax
- کشش و کلیپ به حداقل حداکثر
+
Clip to MinMax
- کلیپ به حداقل حداکثر
+
Red
- قرمز
+
Green
- سبز
+
Blue
- آبی
+
@@ -34019,35 +33783,35 @@ not displayed
Form
- فرم
+
Contrast
enhancement
-
Min/max
-
Red band
- گروه قرمز
+
Green band
- گروه سبز
+
Blue band
- گروه آبی
+
@@ -34068,7 +33832,7 @@ enhancement
Cannot find boundary in multipart content type
-
@@ -34076,52 +33840,52 @@ enhancement
Create a new %1 connection
-
all
-
off
-
QGIS
-
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
Save connection
- ذخیره اتصال
+
Should the existing connection %1 be overwritten?
-
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
@@ -34140,82 +33904,82 @@ Note: giving the password is optional. It will be requested interactivly, when n
Create a new WMS connection
-
Connection details
-
DPI-Mode
-
URL
- مسیر
+
If the service requires basic authentication, enter a user name and optional password
-
Password
- کلمه عبور
+
&User name
-
Name
- نام
+
Name of the new connection
-
HTTP address of the Web Map Server
-
Ignore GetFeatureInfo URI reported in capabilities
-
Ignore GetMap/GetTile URI reported in capabilities
-
Ignore axis orientation (WMS 1.3/WMTS)
-
Invert axis orientation
-
Smooth pixmap transform
-
Referer
-
@@ -34258,12 +34022,12 @@ Extended error information:
Create a New OGR Database connection
-
Connection Information
-
Name
- نام
+
Name of the new connection
-
Host
- میزبان
+
Database
- پایگاه داده
+
Port
- درگاه
+
Username
- کاربری
+
Password
- کلمه عبور
+
Save Password
-
&Test Connect
-
@@ -34364,7 +34128,7 @@ Extended error information:
Failed to load SRIDS: %1
-
New Spatialite Layer
-
Database
- پایگاه داده
+
Create a new Spatialite database
-
...
- ...
+
Layer name
-
Name for the new layer
-
Geometry column
-
geometry
-
Point
- نقطه
+
Line
- خطی
+
Polygon
- چند ضلعی
+
MultiPoint
-
Multiline
- تعدادی خط
+
Multipolygon
- تعدادی چند ضلعی
+
Spatial Reference Id
-
Specify the coordinate reference system of the layer's geometry.
-
Specify CRS
-
Add an integer id field as the primary key for the new layer
-
Create an autoincrementing primary key
-
Name
- نام
+
An attribute name
-
Add attribute to list
-
Add to attributes list
-
Attributes list
-
Delete selected attribute
-
Date
- زمان
+
Comma Separated Value
-
GML
-
Mapinfo File
-
Save layer as...
-
@@ -34630,12 +34394,12 @@ Extended error information:
New Vector Layer
-
File format
-
Point
- نقطه
+
Line
- خطی
+
Polygon
- چند ضلعی
+
New attribute
- ویژگی جدید
+
Name
- نام
+
Width
- عرض
+
Precision
- دقت
+
Add attribute to list
-
Add to attributes list
-
Attributes list
-
Delete selected attribute
-
Remove attribute
- حذف صفت
+
Specify the coordinate reference system of the layer's geometry.
-
Specify CRS
-
File encoding
-
@@ -34729,17 +34493,17 @@ Extended error information:
No query has been specified.
-
There is already a pending request for data.
-
Cannot open output file: %1
-
@@ -34747,47 +34511,47 @@ Extended error information:
Download OpenStreetMap data
-
Extent
- حوزه
+
From map canvas
- از بوم نقشه
+
From layer
-
Manual
- دستی
+
Output file
-
...
- ...
+
OpenStreetMap files (*.osm)
-
Download error
-
OpenStreetMap download
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -34830,95 +34594,95 @@ Extended error information:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
...
- ...
+
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Polygons (closed ways)
-
Output layer name
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
- &بارگذاری به داخل کانواس(چارچوب تصویر) پس از اتمام
+
Tag
-
Count
-
SQLite databases (*.db)
-
Unable to open database:
%1
-
OpenStreetMap export
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -34926,66 +34690,66 @@ Extended error information:
OpenStreetMap Import
-
Input XML file (.osm)
-
...
- ...
+
Output SpatiaLite DB file
-
Create connection (SpatiaLite) after import
-
Connection name
-
OpenStreetMap files (*.osm)
-
SQLite databases (*.db)
-
OpenStreetMap import
-
Output database file exists already. Overwrite?
-
Failed to import OSM data:
%1
-
Import has been successful.
-
@@ -34998,7 +34762,7 @@ Extended error information:
Password
- کلمه عبور
+
@@ -35019,7 +34783,7 @@ Extended error information:
New Connection...
- اتصال جدید ...
+
@@ -35027,96 +34791,94 @@ Extended error information:
Add Layer(s) from a %1 Server
-
&Add
- &اضافه
+
Add selected layers to map
-
Always cache
-
Prefer cache
-
Prefer network
-
Always network
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
Coordinate Reference System (%n available)
crs count
-
-
+
Coordinate Reference System
- سیستم های مرجع مختصات
+
Could not understand the response:
%1
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
@@ -35124,140 +34886,140 @@ Extended error information:
Add Layer(s) from a Server
-
Ready
- خواندن
+
Layers
- لایهها
+
C&onnect
- &اتصال
+
&New
- &جدید
+
Edit
- ویرایش
+
Delete
- حذف
+
Load connections from file
-
Load
- بارگذاری
+
Save connections to file
- ذخیره اتصال در فایل
+
Save
-
Adds a few example WMS servers
-
Add default servers
-
ID
- شناسه
+
Name
- نام
+
Title
- عنوان
+
Abstract
- چکیده
+
Time
-
Coordinate Reference System:
-
Selected Coordinate Reference System
-
Change ...
-
Format
- قالب
+
Options
-
Layer name
-
Tile size
-
Feature limit for GetFeatureInfo
-
Cache
-
Layer Order
-
Move selected layer UP
-
Up
- بالا
+
Move selected layer DOWN
-
Down
- پايين
+
Layer
- لایه
+
Style
- سبک
+
Tilesets
-
Styles
-
Size
- اندازه
+
Server Search
-
Search
- جستجو
+
Description
-
URL
- مسیر
+
Add selected row to WMS list
-
@@ -35359,44 +35121,44 @@ Always network: always load from network and do not check if the cache has a val
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints
-
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Offline Editing Plugin
-
Could not open the spatialite logging database
-
@@ -35432,47 +35194,47 @@ Always network: always load from network and do not check if the cache has a val
Converting to offline project
-
Synchronizing to remote layers
-
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -35480,32 +35242,32 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
-
SpatiaLite DB
-
All files
- همه فایلها
+
Offline Editing Plugin
-
Converting to offline project.
-
Offline database file '%1' exists. Overwrite?
-
@@ -35568,7 +35330,7 @@ Always network: always load from network and do not check if the cache has a val
OGR
-
Data source is invalid, no layer found (%1)
-
OGR
-
Data source is invalid (%1)
-
Whole number (integer)
- مجموع اعداد ( صحیح )
+
Decimal number (real)
- اعداد اعشاری ( اعشاری )
+
Text (string)
- متن ( رشته )
+
Date
- زمان
+
Date & Time
-
OGR[%1] error %2: %3
-
Unknown
-
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
type %1 for field %2 not found
-
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
Feature %1 for attribute update not found.
-
Field %1 of feature %2 doesn't exist.
-
Type %1 of attribute %2 of feature %3 unknown.
-
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
Shapefiles without attribute are considered read-only.
-
@@ -35756,51 +35518,51 @@ Always network: always load from network and do not check if the cache has a val
Open raster
-
Raster file:
-
...
- ...
+
Save raster as:
-
Choose a name of the raster
-
Error
- خطا
+
The selected file is not a valid raster file.
-
Choose a name for the modified raster
-
-modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -35808,22 +35570,22 @@ Always network: always load from network and do not check if the cache has a val
Open an OGR Supported Vector Layer
-
Open Directory
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Add vector layer
-
No database selected.
-
Password for
-
Please enter your password:
-
No protocol URI entered.
-
No layers selected.
-
No directory selected.
-
@@ -35869,39 +35631,39 @@ Always network: always load from network and do not check if the cache has a val
Add vector layer
-
Source type
-
File
- پرونده
+
Directory
- فهرست
+
Database
- پایگاه داده
+
Protocol
-
Encoding
-
URI
-
Source
- منبع
+
Dataset
-
Browse
- جستجو
+
Connections
- ارتباط
+
New
- جدید
+
Edit
- ویرایش
+
Delete
- حذف
+
@@ -35956,12 +35718,12 @@ Always network: always load from network and do not check if the cache has a val
Options Dialog Template
-
GroupBox
-
@@ -35969,17 +35731,17 @@ Always network: always load from network and do not check if the cache has a val
Identify highlight color
-
not present
-
System value: %1
-
Always
-
If needed
-
Never
- هرگز
+
Load all
-
Check file contents
-
Check extension
-
No
-
Basic scan
-
Full scan
-
Cumulative pixel count cut
-
Mean +/- standard deviation
-
Select grid color
-
Solid
-
Dots
-
Crosses
-
- Detected active locale on your system: %1
-
-
- To vertex
-
-
- To segment
-
-
- To vertex and segment
-
-
- map units
-
-
- pixels
- پیکسل
-
-
- Semi transparent circle
-
-
- Cross
-
-
- None
- هیچ یک
-
-
- QGIS files
-
Off
- To vertex
+
- QGIS
- To segment
+
+
+ To vertex and segment
+
+
+ map units
+
+
+ pixels
+
+
+ Semi transparent circle
+
+
+ Cross
+
+
+ None
+
+
+ QGIS files
+
+
+ Off
+
QGIS
+
+
+ GEOS
-
- Round
-
- Mitre
-
- Bevel
- مورب
+
- Save default project
-
- You must set a default project
-
- Current project saved as default
-
- Error saving current project as default
-
- Choose a directory to store project template files
-
Selection color
- انتخاب رنگ
+
Show features visible on map
-
- Choose project file to open at launch
-
- Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
-
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
-
- If Undefined
-
- Unset
-
- Prepend
-
- Append
-
- Choose a directory
-
- Enter scale
- مقیاس را
+
- Scale denominator
- مقیاس مخرج کسر
+
- Load scales
- بارگذاری مقیاس
+
- XML files (*.xml *.XML)
- XML files (*.xml *.XML)
+
- Save scales
- ذخیره مقیاس
+
- No Stretch
-
- Stretch To MinMax
-
- Stretch And Clip To MinMax
-
- Clip To MinMax
-
None / Planimetric
-
@@ -36320,7 +36082,7 @@ Always network: always load from network and do not check if the cache has a val
General
عمومی
@@ -36328,12 +36090,12 @@ Always network: always load from network and do not check if the cache has a val
System
-
Data Sources
-
Canvas & Legend
-
Canvas and legend
-
Map Tools
-
Timeout for timed messages or dialogs
-
s
-
Bold group box titles
-
QGIS-styled group boxes
-
Most recent
-
Specific
-
...
...
Open project on launch
-
Prompt to save project and data source changes when required
-
Prompt for confirmation when a layer is to be removed
-
QSettings
-
Reset the User Interface settings, to reset QGIS to it's default view
-
Environment
-
Apply
-
Variable
-
Remove
حذف
@@ -36627,24 +36389,24 @@ Always network: always load from network and do not check if the cache has a val
Add
اضافه
Current environment variables (read-only - bold indicates modified at startup)
-
Show only QGIS-specific variables
-
Use custom variables (restart required - include separators)
-
Path(s) to search for Scalable Vector Graphic (SVG) symbols
-
Feature attributes and table
-
Data source handling
-
Scan for valid items in the browser dock
-
Scan for contents of compressed files (.zip) in browser dock
-
Prompt for raster sublayers when opening
-
Rendering behavior
-
Use render caching where possible to speed up redraws
-
Render layers in parallel using many CPU cores
-
Max cores to use:
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Rendering quality
-
Make lines appear less jagged at the expense of some drawing performance
-
Multi band color (byte / band)
-
Multi band color (> byte / band)
-
-
-
%
- %
+
Debugging
-
Show these events in the Log Message panel (under Rendering tab)
-
Map canvas refresh
-
Default map appearance (overridden by project properties)
-
Highlight color
-
<html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
Buffer
-
Lines / outlines buffer in millimeters.
-
Minimum width
-
Minimum line / outline width in millimeters.
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- پيکسل
-
-
- Suppress attribute form pop-up after feature creation
-
Use live-updating color chooser dialogs
-
Ignore shapefile encoding declaration
-
Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
Composer
-
Custom side bar style
-
Add Oracle layers with double click and select in extended mode
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
Simplify on provider side if possible
-
Layer legend
-
Capitalise layer names
-
Bold layer names
-
Display classification attribute names
-
Bold group names
-
Create raster icons (may be slow)
-
Legend item styles
-
WMS getLegendGraphic Resolution
-
Nautical Miles
-
Map update interval
-
ms
-
Enable feature simplification by default for newly added layers
-
Gon
-
Add predefined scale
-
Remove selected
-
Insert default scales
-
Import from file
-
Export to file
-
Composition defaults
-
Default font
-
Grid appearance
-
Grid style
-
Color...
-
+
+ Grid defaults
+
+
+ Spacing
+
mm
- میلی متر
+
Grid offset
-
x:
-
y:
-
Snap tolerance
-
- Guide defaults
+
+
+ Feature creation
ايجاد کردن
- Validate geometries
اعتبارسنجی هندسه
- Reuse last entered attribute values
استفاده مجدد از آخرین مقادیر ویژگی وارده
- Rubberband
حلقه لاستیکی
- Line color
رنگ خط
- Line width in pixels
عرض خط به پیکسل
- Line width
عرض خط
- Snapping
چسبیدن به
- Default snap mode
پیش فرض حالت چسبیدن به
- Default snapping tolerance
پیش فرض خطای چسبیدن به
- Search radius for vertex edits
شعاع جستجو برای ویرایش گره ها
- map units
واحد نقشه
pixels
- پیکسل
+
- Open snapping options in a dock window (QGIS restart required)
-
- Vertex markers
نشانگرهای گره ها
- Marker style
سبک نشانگر
- Marker size
اندازه نشانگر
- Show markers only for selected features
نمایش نشانگرهای فقط برای ویژگی های انتخاب شده
- Curve offset tool
-
- Miter limit
-
- Join style
اتصال سبک ها
- Quadrant segments
-
- GDAL driver options
-
- Edit Pyramids Options
ویرایش هرم تنظیمات
- Edit Create Options
ویرایش تنظیمات
- GDAL drivers
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
در برخی از موارد چند درایور برای نمایش یک عکس رستر وجود دارد .از لیست زیر مشخص می شود که از چه درایوری استفاده می شود .
- Name
نام
- ext
پسوند
- Flags
پرچم
- Description
شرح
- CRS for new layers
-
- Select...
انتخاب ...
- Use &project CRS
-
- Prompt for &CRS
-
- Use default CRS displa&yed below
-
- When a new layer is created, or when a layer is loaded that has no CRS
-
- Default CRS for new projects
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
اگر در حالت کار در پروژه لایه ای اضافه شود که دارای CRS متفاوت از لایه ها باشد CRS لایه های موجود استفاده می شود .
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
- Always start new projects with this CRS
همیشه پروژه های جدید با این CRS شروع
- Enable 'on the &fly' reprojection by default
فعال نمودن حالت &پرواز در پروژه
- Don't enable 'on the fly' reprojection
-
- Default datum transformations
-
- Source CRS
-
- Destination CRS
-
- Source datum transform
-
- Destination datum transform
-
- Ask for datum transformation when no default is defined
-
- Override system locale
-
- Locale to use instead
تنظیمات محلی با استفاده از به جای
- <b>Note:</b> Enabling / changing overide on local requires an application restart
-
- Additional Info
اطلاعات اضافی
- Detected active locale on your system:
محلی فعال بر روی سیستم شما تشخیص داده شده :
- WMS search address
آدرس جستجو WMS
- Timeout for network requests (ms)
فاصله زمانی در پاسخ شبکه
- Default expiration period for WMS-C/WMTS tiles (hours)
پیش فرض دوره انقضای برای کاشی ها WMS-C/WMTS (ساعت)
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
Max retry in case of tile request errors
+
+
+ User-Agent
+
+
+ Cache settings
تنظیمات حافظه پنهان
- Directory
فهرست
- Size [KiB]
-
- Clear
تمیز
- Use proxy for web access
استفاده از پراکسی برای دسترسی به وب سایت
- Host
میزبان
- Port
درگاه
- User
کاربری
- Leave this blank if no proxy username / password are required
اینجا را خالی بگذارید اگر پروکسی و نام کاربری / کلمه عبور مورد نیاز نیست
- Password
کلمه عبور
- Proxy type
نوع پروکسی
- Exclude URLs (starting with)
محروم کردن آدرس ها (با شروع از)
@@ -37592,7 +37357,7 @@ Always network: always load from network and do not check if the cache has a val
Missing objects
-
@@ -37608,17 +37373,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -37626,7 +37391,7 @@ Missing some of the .ui template objects:
Connection to database failed
-
Oracle
-
SQL:%1
error:%2
-
Database connection was successful, but the accessible tables could not be determined.
-
Unable to get list of spatially enabled tables from the database
-
Unsupported geometry type %1 in %2.%3.%4 ignored
-
View %1.%2 doesn't have integer columns for use as keys.
-
Point
- نقطه
+
Multipoint
- تعدادی نقطه
+
Line
- خطی
+
Multiline
- تعدادی خط
+
Polygon
- چند ضلعی
+
Multipolygon
- تعدادی چند ضلعی
+
No Geometry
-
Unknown Geometry
-
@@ -37722,17 +37487,17 @@ error:%2
Edit...
- ویرایش ...
+
Delete
- حذف
+
Refresh
- به روز رسانی
+
Abort
-
Import layer
-
%1: Not a vector layer!
- %1 لایه وکتود وجود ندارد!
+
%1: OK!
- %1 : تایید!
+
Import to Oracle database
-
Failed to import some layers!
- ورود برخی از لایه های ناموفق بود!
-
-
+
Import was successful.
- ورود موفق بود.
+
@@ -37788,12 +37551,12 @@ error:%2
Delete layer
- حذف لایه
+
Layer deleted successfully.
- لایه حذف شده است .
+
@@ -37801,41 +37564,41 @@ error:%2
Saving passwords
- ذخیره کلمه عبور
+
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
- ذخیره اتصال
+
Should the existing connection %1 be overwritten?
-
Test connection
- آزمون اتصال
+
Connection to %1 was successful
- اتصال به %1 موفقیت آمیز بود
+
Connection failed - Check settings and try again.
-
@@ -37843,128 +37606,128 @@ error:%2
Create a New Oracle connection
-
Connection Information
-
Password
- کلمه عبور
+
Save Username
-
Username
- کاربری
+
Name of the new connection
-
Database
- پایگاه داده
+
Name
- نام
+
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
Also list tables with no geometry
- لیست جداول بدون هندسه
+
Port
- درگاه
+
1521
- 1521
+
&Test Connect
-
Save Password
-
Host
- میزبان
+
Use estimated table statistics for the layer metadata.
-
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Use estimated table metadata
-
@@ -37972,12 +37735,12 @@ error:%2
%1 as %2 in %3
- %1 از %2 در %3
+
as geometryless table
- بدون جدول هندسی
+
@@ -37985,12 +37748,12 @@ error:%2
Add Oracle GeoRaster Layer...
-
Add a Oracle Spatial GeoRaster...
-
@@ -37998,52 +37761,52 @@ error:%2
Whole number
- عدد صحیح
+
Whole big number
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
- اعداد اعشاری ( اعشاری )
+
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
-
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
-
Primary key field %1 not found in %2
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
No key field for query given.
-
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -38495,32 +38258,32 @@ Error: %2
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Password for %1/<password>@%2
-
Please enter your password:
-
Open failed
-
The connection to %1 failed. Please verify your connection parameters. Make sure you have the GDAL GeoRaster plugin installed.
-
@@ -38528,52 +38291,52 @@ Error: %2
Add Oracle Table(s)
-
&Add
- &اضافه
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Owner
- مالک
+
Table
- جدول
+
Geometry column
-
SRID
- SRID
+
Sql
- اس کیو ال
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
Stop
-
Connect
-
@@ -38657,7 +38420,7 @@ Error: %2
Enter...
- انتخاب ...
+
@@ -38665,12 +38428,12 @@ Error: %2
Owner
- مالک
+
Table
- جدول
+
Geometry column
-
SRID
- SRID
+
Select at id
-
Sql
- اس کیو ال
+
Specify a geometry type
-
Enter a SRID
-
Select a primary key
-
Select...
- انتخاب ...
+
Enter...
- انتخاب ...
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -38742,63 +38505,61 @@ Error: %2
Edit...
- ویرایش ...
+
Delete
- حذف
+
Refresh
- به روز رسانی
+
Copying features...
- کپي کردن عوارض
+
Abort
-
Import layer
-
%1: Not a vector layer!
- %1 لایه وکتود وجود ندارد!
+
%1: OK!
- %1 : تایید!
+
Import to PostGIS database
-
Failed to import some layers!
- ورود برخی از لایه های ناموفق بود!
-
-
+
Import was successful.
- ورود موفق بود.
+
@@ -38862,7 +38623,7 @@ Error: %2
Label
-
@@ -38870,12 +38631,12 @@ Error: %2
Paste Transformations
-
<b>Note: This function is not useful yet!</b>
-
Solid Line
-
No Pen
-
Dash Line
-
Dot Line
-
Dash Dot Line
-
Dash Dot Dot Line
-
@@ -38962,61 +38723,61 @@ Error: %2
disable
-
allow
-
prefer
-
require
-
Saving passwords
- ذخیره کلمه عبور
+
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
- ذخیره اتصال
+
Should the existing connection %1 be overwritten?
-
Test connection
- آزمون اتصال
+
Connection to %1 was successful
- اتصال به %1 موفقیت آمیز بود
+
Connection failed - Check settings and try again.
-
@@ -39024,114 +38785,114 @@ Error: %2
Create a New PostGIS connection
-
Connection Information
-
Name
- نام
+
Service
-
Host
- میزبان
+
Port
- درگاه
+
Database
- پایگاه داده
+
SSL mode
-
Username
- کاربری
+
Password
- کلمه عبور
+
Name of the new connection
-
5432
- 5432
+
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
Only show layers in the layer registries
-
Restrict the search to the public schema for spatial tables not in the geometry_columns table
-
When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
-
Only look in the 'public' schema
-
Save Username
-
&Test Connect
-
Save Password
-
Use estimated table statistics for the layer metadata.
-
Use estimated table metadata
-
Also list tables with no geometry
- لیست جداول بدون هندسه
+
Don't resolve type of unrestricted columns (GEOMETRY)
-
@@ -39167,52 +38928,52 @@ Error: %2
Add PostGIS Table(s)
-
&Add
- &اضافه
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
-
Schema
- طرح
+
Table
- جدول
+
Geometry column
-
SRID
- SRID
+
Sql
- اس کیو ال
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
-
Stop
-
Connect
-
@@ -39304,12 +39065,12 @@ Error: %2
Schema
- طرح
+
Table
- جدول
+
Data Type
-
Spatial Type
-
SRID
- SRID
+
Select at id
-
Sql
- اس کیو ال
+
Select a primary key
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Select...
- انتخاب ...
+
Specify a geometry type
-
Enter a SRID
-
Enter...
- انتخاب ...
+
@@ -39384,32 +39145,32 @@ Error: %2
Form
- فرم
+
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- عرض
+
Height
- ارتفاع
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39417,208 +39178,208 @@ Error: %2
Select a picture
-
...
- ...
+
QgsPluginInstaller
Looking for new plugins...
-
There is a new plugin available
-
There is a plugin update available
-
QGIS Python Plugin Installer
- نصب پلاگین پایتون در کیو جی ای اس
+
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
-
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
-
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
-
Plugin installation failed
-
Plugin has disappeared
-
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
-
Plugin installed successfully
-
Plugin reinstalled successfully
-
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
-
The plugin is broken. Python said:
-
Plugin uninstall failed
-
Are you sure you want to uninstall the following plugin?
-
Warning: this plugin isn't available in any accessible repository!
-
Plugin uninstalled successfully
-
Unable to add another repository with the same URL!
-
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
-
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
QGIS Official Plugin Repository
-
Nothing to remove! Plugin directory doesn't exist:
-
Failed to remove the directory:
-
Check permissions or remove it manually
-
QgsPluginInstallerFetchingDialog
Success
-
Resolving host name...
-
Connecting...
- متصل شده ...
+
Host connected. Sending request...
-
Downloading data...
-
Idle
-
Closing connection...
-
Error
- خطا
+
@@ -39653,43 +39414,43 @@ You need to restart QGIS in order to reload it.
QgsPluginInstallerInstallingDialog
Installing...
-
Resolving host name...
-
Connecting...
- متصل شده ...
+
Host connected. Sending request...
-
Downloading data...
-
Idle
-
Closing connection...
-
Error
- خطا
+
Failed to unzip the plugin package. Probably it's broken or missing from the repository. You may also want to make sure that you have write permission to the plugin directory:
-
Aborted by user
-
@@ -39714,7 +39475,7 @@ You need to restart QGIS in order to reload it.
QgsPluginInstallerPluginErrorDialog
no error message received
-
@@ -39722,17 +39483,17 @@ You need to restart QGIS in order to reload it.
Error loading plugin
-
The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below:
-
Do you want to uninstall this plugin now? If you're unsure, probably you would like to do this.
-
@@ -39740,50 +39501,50 @@ You need to restart QGIS in order to reload it.
Repository details
-
Enter a name for the repository
-
Name
- نام
+
Enter the repository URL, beginning with "http://"
-
Enable or disable the repository (disabled repositories will be omitted)
-
Parameters
- ورودیها
+
?qgis=
-
URL
- مسیر
+
Enabled
-
@@ -39792,284 +39553,284 @@ You need to restart QGIS in order to reload it.
Plugins
- پلاگینها
+
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
No Plugins
-
No QGIS plugins found in %1
-
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
-
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
Installable
category: plugins that are available for installation
-
This plugin is incompatible with this version of QGIS
-
Plugin designed for QGIS %1
compatible QGIS version(s)
-
This plugin requires a missing module
-
This plugin is broken
-
There is a new version available
-
This is a new plugin
-
Installed version of this plugin is higher than any version found in repository
-
This plugin is experimental
-
This plugin is deprecated
-
Category
-
Tags
-
Author
-
More info
-
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Upgrade plugin
-
Downgrade plugin
-
Install plugin
-
Reinstall plugin
-
Reload all repositories
-
Only show plugins from selected repository
-
Clear filter
-
connected
-
The repository is connected
-
unavailable
-
The repository is enabled, but unavailable
-
disabled
-
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
@@ -40077,253 +39838,253 @@ You need to restart QGIS in order to reload it.
Plugin Manager
-
All
-
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
New
- جدید
+
Not installed plugins seen for the first time
-
Invalid
-
Broken and incompatible installed plugins
-
Settings
- تنظیمات
+
Search
- جستجو
+
Not installed
-
about:blank
-
Upgrade all upgradeable plugins
-
Upgrade all
-
Uninstall the selected plugin
-
Uninstall plugin
-
Install, reinstall or upgrade the selected plugin
-
Reinstall plugin
-
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
Check for updates on startup
-
every time QGIS starts
-
once a day
-
every 3 days
-
every week
-
every 2 weeks
-
every month
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
-
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Status
-
Name
- نام
+
URL
- مسیر
+
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Add a new plugin repository
-
Add...
-
Edit the selected repository
-
Edit...
- ویرایش ...
+
Remove the selected repository
-
Delete
- حذف
+
@@ -40345,7 +40106,7 @@ p, li { white-space: pre-wrap; }
The point displacement renderer only applies to (single) point layers.
'%1' is not a point layer and cannot be displayed by the point displacement renderer
-
@@ -40353,77 +40114,77 @@ p, li { white-space: pre-wrap; }
Form
- فرم
+
Center symbol:
-
Renderer:
-
Renderer settings...
-
Displacement circles
-
Circle pen width:
-
Circle color:
-
Circle radius modification:
-
Point distance tolerance:
-
Labels
-
Label attribute:
-
Label font...
-
Label color:
-
Use scale dependent labelling
-
max scale denominator:
-
@@ -40434,7 +40195,7 @@ p, li { white-space: pre-wrap; }
Millimeter
-
Map unit
-
Horizontal distance
- فاصله افقی
+
Vertical distance
- فاصله عمودی
+
Horizontal displacement
- جابجایی افقی
+
Vertical displacement
- جابجایی عمودی
+
@@ -40470,7 +40231,7 @@ p, li { white-space: pre-wrap; }
Connection to database failed
-
PostGIS
-
error in setting encoding
-
undefined return value from encoding setting
-
Your database has no working PostGIS support.
-
Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net)
-
Database connection was successful, but the accessible tables could not be determined.
-
Database connection was successful, but the accessible tables could not be determined. The error message from the database was:
%1
-
Database connection was successful, but the accessible tables could not be determined.
The error message from the database was:
%1
-
Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry.
-
Unable to get list of spatially enabled tables from the database
-
Retrieval of postgis version failed
-
Could not parse postgis version string '%1'
-
Connection error: %1 returned %2 [%3]
-
Erroneous query: %1 returned %2 [%3]
-
Query failed: %1
Error: no result buffer
-
Query: %1 returned %2 [%3]
-
%1 cursor states lost.
SQL: %2
Result: %3 (%4)
-
resetting bad connection.
-
retry after reset succeeded.
-
retry after reset failed again.
-
connection still bad after reset.
-
bad connection, not retrying.
-
Point
- نقطه
+
Multipoint
- تعدادی نقطه
+
Line
- خطی
+
Multiline
- تعدادی خط
+
Polygon
- چند ضلعی
+
Multipolygon
- تعدادی چند ضلعی
+
No Geometry
-
Unknown Geometry
-
None
- هیچ یک
+
Geometry
- هندسی
+
Geography
-
TopoGeometry
-
Query could not be canceled [%1]
-
PQgetCancel failed
-
@@ -40698,7 +40459,7 @@ Result: %3 (%4)
invalid PostgreSQL layer
-
PostGIS
-
invalid PostgreSQL topology layer
-
PostgreSQL layer has no primary key.
-
Whole number (smallint - 16bit)
-
Whole number (integer - 32bit)
-
Whole number (integer - 64bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
- اعداد اعشاری ( اعشاری )
+
Decimal number (double)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, unlimited length (text)
-
Date
- زمان
+
PostgreSQL layer has unknown primary key type.
-
Read attempt on an invalid postgresql data source
-
FAILURE: Field %1 not found.
-
unexpected formatted field type '%1' for field %2
-
Field %1 ignored, because of unsupported type %2
-
Field %1 ignored, because of unsupported type type %2
-
Duplicate field %1 found
-
PostgreSQL is still in recovery after a database crash
(or you are connected to a (read-only) slave).
Write accesses will be denied.
-
The custom query is not a select query.
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
Unexpected relation type '%1'.
-
No key field for query given.
-
Could not find topology of layer %1.%2.%3
-
PostGIS error while adding features: %1
-
PostGIS error while deleting features: %1
-
PostGIS error while adding attributes: %1
-
PostGIS error while deleting attributes: %1
-
PostGIS error while changing attributes: %1
-
PostGIS error while changing geometry values: %1
-
result of extents query invalid: %1
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
PostgreSQL version: unknown
-
unknown
- مجهول
+
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -40978,47 +40739,47 @@ PostGIS %2
Loading layer %1
-
Unable to open %1
-
Project File Read Error
-
%1 at line %2 column %3
-
Project file read error: %1 at line %2 column %3
-
%1 for file %2
-
Unable to save to file %1
-
%1 is not writable. Please adjust permissions (if possible) and try again.
-
Unable to save to file %1. Your project may be corrupted on disk. Try clearing some space on the volume and check file permissions before pressing save again.
-
@@ -41037,7 +40798,7 @@ PostGIS %2
Unable to open one or more project layers.
Choose ignore to continue loading without the missing layers. Choose cancel to return to your pre-project load state. Choose OK to try to find the missing layers.
-
@@ -41045,22 +40806,22 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select project file
-
QGIS files
-
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -41068,172 +40829,172 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select layers and groups to embed
-
Project file
-
...
- ...
+
QgsProjectProperties
- Layer
لایه
- Type
نوع
- Identifiable
قابل شناسایی
- Vector
وکتور
- WMS
WMS
- Raster
رستر
- Coordinate System Restriction
مختصات محدودیت سیستم
- No coordinate systems selected. Disabling restriction.
بدون سیستم مختصات انتخاب شده است. غیر فعال کردن محدودیت.
- Selection color
انتخاب رنگ
- Measure tool (CRS transformation: %1)
-
- Canvas units (CRS transformation: %1)
-
+ OFF
-
+ ON
-
- CRS %1 was already selected
CRS %1 در حال حاضر انتخاب شد
- Coordinate System Restrictions
مختصات محدودیت سیستم
- The current selection of coordinate systems will be lost.
Proceed?
سیستم مختصات انتخاب شده از دست رفته است .
ادامه دهید؟
- Select print composer
انتخاب پرینتر سازنده
- Composer Title
عنوان سازنده
- Select restricted layers and groups
انتخاب لایه ها و گروه های محدود
- Enter scale
مقیاس را
- Scale denominator
مقیاس مخرج کسر
- Load scales
بارگذاری مقیاس
- XML files (*.xml *.XML)
XML files (*.xml *.XML)
- Save scales
ذخیره مقیاس
- Select a valid symbol
انتخاب یک نماد معتبر
- Invalid symbol :
نماد نامعتبر :
- Parameters:
ورودیها:
+ Select %1 from pull-down menu to adjust radii
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
فقط وفتی می توانید از محاسبات بیضوی استفاده کنید که سیستم مختصات فعال باشد
@@ -41258,7 +41019,6 @@ Proceed?
Project title
عنوان پروژه
@@ -41298,37 +41058,37 @@ Proceed?
ذخیره مسیرهای
- Measure tool
ابزار اندازه گیری
- Semi-minor
نیمه جزئی
- Semi-major
نیمه بزرگ
- Used when CRS transformation is turned off
وقتی تبدیل سیستم مختصات خاموش است
- Canvas units
واحدهای چهارچوب
- Meters
متر
- Feet
پا
@@ -41357,102 +41117,102 @@ Proceed?
OWS server
-
- Ellipsoid
(for distance calculations)
-
- Degree
درجه
- Degree display
نمایش درجه
- Decimal degrees
درجه دهدهی
- Degrees, Minutes
درجه، دقیقه
- Degrees, Minutes, Seconds
درجه، دقیقه، ثانیه
- Precision
دقت
- Automatically sets the number of decimal places in the mouse position display
به صورت خودکار مجموعه تعداد رقم اعشار در نمایش موقعیت ماوس
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
-
- Automatic
اتوماتیک
- Sets the number of decimal places to use for the mouse position display
تعداد رقم اعشار مکان موشواره را در صفحه مشخص می نماید
- Manual
دستی
- The number of decimal places for the manual option
تعداد رقم اعشار برای کتابچه راهنمای کاربر
- decimal places
رقم اعشار
- Project scales
مقیاس پروژه
- ...
...
- Enable 'on the fly' CRS transformation
-
شناسایی لایه ها
- Project layers
لایه های پروژه
- Layer
لایه
- Type
نوع
- Identifiable
قابل شناسایی
- Marker
نشانگر
- Line
خطی
- Default symbols
نمادهای پیش فرض
- Fill
پر کردن
- Color Ramp
رمپ رنگ
- Transparency
شفافیت
- %
%
- Style Manager
مدیریت سبک نگارش
- Options
مشخصات
Relations
-
- Project file
-
-
- Nautical miles
-
- Assign random colors to symbols
اختصاص رنگ به طور تصادفی به نمادهای
- Service capabilities
-
- Person
شخص
- Title
عنوان
- Organization
سازمان
- Online resource
منابع آنلاین
- E-Mail
ایمیل
- Phone
تلفن
- Abstract
چکیده
- Fees
-
- Access constraints
محدودیت های دسترسی
- Keyword list
لیست کلمات کلیدی
- WMS capabilities
-
- Add geometry to feature response
-
- Min. X
X حداقل
- Min. Y
Y حداقل
- Max. X
X حداکثر
- Max. Y
Y حداکثر
- Use Current Canvas Extent
استفاده از بوم وسعت کنونی
- Used
مورد استفاده
- Exclude composers
حذف سازنده
- WFS capabilities
-
- WCS capabilities
-
- Exclude layers
حذف لایه
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
- Published
منتشر کردن
- Update
بروزرسانی
- Insert
قرار دادن
- Delete
حذف
- Unselect all
عدم انتخاب همه
- Select all
انتخاب همه
@@ -41706,39 +41461,39 @@ Proceed?
ماکرو
- Advertised URL
اعلان مسیر
- Width
عرض
- Height
ارتفاع
- Maximums for GetMap request
حد اکثر دریافت برای گرفتن نقشه
- Advertised extent
وسعت آگهی
- CRS restrictions
محدودیت سیستم مختصات
- Python macros
ماکروها پایتون
@@ -41790,30 +41545,30 @@ Because of this the projection selector will not work...
Recently used coordinate reference systems
-
Coordinate Reference System
- سیستم های مرجع مختصات
+
Selected CRS:
-
Authority ID
-
ID
- شناسه
+
Set provider filter on %1
-
Query Result
-
The where clause returned %n row(s).
returned test rows
-
-
+
Query Failed
-
An error occurred when executing the query.
-
The data provider said:
%1
-
Error in Query
-
The subset string could not be set
-
@@ -41894,25 +41647,25 @@ The data provider said:
Query Builder
-
Datasource
-
Fields
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
-
Sample
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
-
All
-
Use unfiltered layer
-
Operators
-
=
-
<
-
NOT
-
OR
-
AND
-
%
- %
+
IN
-
NOT IN
-
!=
-
>
- >
+
LIKE
-
ILIKE
-
>=
-
<=
-
Provider specific filter expression
-
@@ -42045,29 +41798,29 @@ p, li { white-space: pre-wrap; }
Editable
-
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42075,32 +41828,32 @@ p, li { white-space: pre-wrap; }
Form
- فرم
+
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Maximum
- بيشترين
+
Minimum
- کمترين
+
Local minimum/maximum = 0/0
-
@@ -42126,52 +41879,52 @@ p, li { white-space: pre-wrap; }
Raster calculator
-
Raster bands
-
Result layer
-
Output layer
-
...
- ...
+
Current layer extent
-
X min
-
XMax
-
Y min
-
Y max
-
Rows
- سطر
+
Output format
-
Add result to project
-
Operators
-
+
-
*
-
sqrt
-
sin
-
^
-
acos
-
(
-
-
-
/
-
cos
-
asin
-
tan
-
atan
-
)
-
<
-
>
- >
+
=
-
OR
-
AND
-
<=
-
>=
-
Raster calculator expression
-
@@ -42314,7 +42067,7 @@ p, li { white-space: pre-wrap; }
Format not supported
-
Text
- متن
+
Html
-
Default
- پیش فرض
+
No compression
-
Low compression
-
High compression
-
JPEG compression
-
Cannot get create options for driver %1
-
For details on pyramids options please see the following pages
-
No help available
-
cannot validate pyramid options
-
Cannot validate creation options
-
Valid
-
pyramid creation option
-
creation option
-
Profile name:
-
Use simple interface
-
Use table interface
-
@@ -42438,32 +42191,32 @@ Click on help button to get valid creation options for this format.
Form
- فرم
+
New
- جدید
+
Remove
- حذف
+
Reset
- بارگزاری مجدد
+
Profile
-
Name
- نام
+
+
-
Validate
-
Help
- راهنما
+
-
-
Insert KEY=VALUE pairs separated by spaces
-
@@ -42501,119 +42254,119 @@ Click on help button to get valid creation options for this format.
Visibility
-
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Show all bands
-
Show RGB/Gray band(s)
-
Show selected band
-
Display
- نمایش
+
Draw as lines
-
Draw as lines (only int layers)
-
Actions
- اکشن
+
Reset
- بارگزاری مجدد
+
Load min/max
-
Estimate (faster)
-
Actual (slower)
-
Current extent
-
Use stddev (1.0)
-
Use stddev (custom)
-
Load for each band
-
Recompute Histogram
-
Band %1
-
Choose a file name to save the map image as
- با انتخاب نام فایل نقشه در عکس ذخیره می شود در
+
@@ -42621,58 +42374,58 @@ Click on help button to get valid creation options for this format.
Form
- فرم
+
Set min/max style for
-
Min
- حد پایین
+
Pick Min value on graph
-
...
- ...
+
Max
- حد بالا
+
Pick Max value on graph
-
Prefs/Actions
-
Save plot
-
Save as image...
-
Compute Histogram
-
@@ -42680,27 +42433,27 @@ Click on help button to get valid creation options for this format.
Identify
- شناسایی
+
Build Pyramids
-
Create Datasources
-
Remove Datasources
-
Band
- باند
+
@@ -42710,192 +42463,192 @@ Click on help button to get valid creation options for this format.
Not Set
-
QgsRasterLayer created
-
Raster
- رستر
+
No Data Value
-
NoDataValue not set
-
Could not determine raster data type.
-
Driver
-
Data Type
-
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Band
- باند
+
Band No
-
No Stats
-
No stats collected yet
-
Min Val
-
Max Val
-
Range
-
Mean
- میانگین
+
Sum of squares
-
Standard Deviation
-
Sum of all cells
-
Cell Count
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
<maplayer> not found.
-
@@ -42903,7 +42656,7 @@ Click on help button to get valid creation options for this format.
Not Set
-
Large resolution raster layers can slow navigation in QGIS.
-
By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom.
-
You must have write access in the directory where the original data is stored to build pyramids.
-
Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
-
Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
-
Nearest neighbour
-
Cubic
-
Percent Transparent
-
Gray
-
Indexed Value
-
not defined
-
n/a
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
QGIS Generated Transparent Pixel Value Export File
-
Value
-
Write access denied. Adjust the file permissions and try again.
-
Import Error
-
The following lines contained errors
%1
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Load layer properties from style file
-
QGIS Layer Style File
-
Save layer properties as style file
-
@@ -43185,304 +42938,304 @@ Click on help button to get valid creation options for this format.
Raster Layer Properties
-
Save Style ...
-
Load Style ...
-
Resolutions
-
Save As Default
-
Restore Default Style
-
Render type
-
Resampling
-
Oversampling
-
Transparency
- شفافیت
+
Style
- سبک
+
Layer info
-
Description
-
Keyword list
- لیست کلمات کلیدی
+
Format
- قالب
+
Attribution
-
Url
-
MetadataUrl
-
Type
- نوع
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
-
Band rendering
-
Color rendering
-
Saturation
- اشباع
+
Off
-
By lightness
-
By luminosity
-
By average
-
Hue
- رنگ
+
Blending mode
-
Brightness
-
Contrast
-
Grayscale
-
Colorize
-
Strength
-
%
- %
+
Reset all color rendering options to default
-
Reset
- بارگزاری مجدد
+
Zoomed: in
-
out
-
Global transparency
-
None
- هیچ یک
+
00%
-
<p align="right">Full</p>
-
No data value
-
Use original source no data value.
-
No data value:
-
Original data source no data value, if exists.
-
<src no data value>
-
Additional user defined no data value.
-
Additional no data value
-
Custom transparency options
-
Transparency band
-
Add values from display
-
Transparent pixel list
-
Add values manually
-
...
- ...
+
Remove selected row
-
Default values
-
Import from file
-
Export to file
-
General
- عمومی
+
Layer name
-
displayed as
-
Layer source
-
Columns
-
Rows
- سطر
+
No Data
-
Scale dependent visibility
-
Coordinate reference system
-
Specify the coordinate reference system of the layer's geometry.
-
Specify...
-
Thumbnail
-
Legend
- رسته
+
Palette
-
Metadata
- متاداده
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Title
- عنوان
+
Abstract
- چکیده
+
Pyramids
-
Average
- میانگین
+
Nearest Neighbour
-
Build pyramids
-
Resampling method
-
Overview format
-
External
-
Internal (if possible)
-
External (Erdas Imagine)
-
Histogram
-
@@ -43670,67 +43423,67 @@ p, li { white-space: pre-wrap; }
From
- از
+
To
- به
+
Select output directory
-
Warning
- هشدار
+
The directory %1 contains files which will be overwritten: %2
-
Select output file
-
GeoTIFF
-
layer
-
user defined
-
Resolution (current: %1)
-
Layer (%1, %2)
-
Project (%1, %2)
-
Selected (%1, %2)
-
@@ -43738,58 +43491,58 @@ p, li { white-space: pre-wrap; }
Save raster layer as...
-
Output mode
-
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Format
- قالب
+
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
Create VRT
-
Save as
-
Browse...
- فهرست...
+
Change ...
-
Extent
- حوزه
+
Resolution
-
Horizontal
- افقی
+
Columns
-
Rows
- سطر
+
Layer resolution
-
Layer size
-
Vertical
-
VRT Tiles
-
Maximum number of columns in one tile.
-
Max columns
-
Maximum number of rows in one tile.
-
Max rows
-
Create Options
-
Pyramids
-
Resolutions
-
Pyramid resolutions corresponding to levels given
-
Use existing
-
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
- مقادیر داده ها موجود نمی باشد
+
Add values manually
-
...
- ...
+
Load user defined fully transparent (100%) values
-
Remove selected row
-
Clear all
-
@@ -43937,12 +43690,12 @@ datasets with maximum width and height specified below.
No option selected
-
Please select an option to load min/max values.
-
@@ -43950,74 +43703,74 @@ datasets with maximum width and height specified below.
Form
- فرم
+
Load min/max values
-
-
-
%
- %
+
Min / max
-
Extent
- حوزه
+
Full
-
Current
-
Accuracy
-
Actual (slower)
-
Estimate (faster)
-
Cumulative
count cut
-
Mean +/-
standard deviation ×
-
Load
- بارگذاری
+
@@ -44025,62 +43778,62 @@ standard deviation ×
Form
- فرم
+
Insert positive integer values separated by spaces
-
External (GTiff .ovr)
-
Internal (if possible)
-
External (Erdas Imagine .aux)
-
Levels
-
Create Options
-
Resampling method
-
Average
- میانگین
+
Nearest Neighbour
-
Custom levels
-
Overview format
-
@@ -44088,53 +43841,53 @@ standard deviation ×
Unknown
-
User defined
-
Estimated
-
Exact
-
min / max
-
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
-
@@ -44142,63 +43895,63 @@ standard deviation ×
Export Frequency distribution as csv
-
Export Colors and elevations as xml
-
Import Colors and elevations from xml
-
Error opening file
-
The relief color file could not be opened
-
Error parsing xml
-
The xml file could not be loaded
-
Enter result file
- ثبت فایل خروجی
+
Enter lower elevation class bound
-
Elevation
-
Enter upper elevation class bound
-
Select color for relief class
-
@@ -44206,112 +43959,112 @@ standard deviation ×
Dialog
- محاوره
+
Elevation layer
-
Output layer
-
...
- ...
+
Output format
-
Z factor
-
Add result to project
-
Illumination
-
Azimuth (horizontal angle)
-
Vertical angle
-
Relief colors
-
Create automatically
-
Export distribution...
-
Up
- بالا
+
Down
- پايين
+
+
-
-
-
Lower bound
-
Upper bound
-
Color
- رنگ
+
Export colors...
-
Import colors...
-
@@ -44319,41 +44072,41 @@ standard deviation ×
Terrain analysis
-
Slope
-
Aspect
-
Hillshade
-
Relief
-
Ruggedness index
-
Calculating hillshade...
-
Abort
-
Calculating relief...
-
Calculating slope...
-
Calculating aspect...
-
Ruggedness
-
Calculating ruggedness...
-
@@ -44395,7 +44148,7 @@ standard deviation ×
Preview Expression
-
@@ -44403,32 +44156,32 @@ standard deviation ×
Dialog
- محاوره
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -44436,19 +44189,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -44456,7 +44209,7 @@ standard deviation ×
[Generated automatically]
-
@@ -44464,37 +44217,37 @@ standard deviation ×
Add relation
-
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
- نام
+
Id
-
@@ -44502,43 +44255,43 @@ standard deviation ×
Form
- فرم
+
Toggle editing
-
New
- جدید
+
Delete
- حذف
+
Link
-
Unlink
-
Form View
-
Table View
-
@@ -44546,47 +44299,47 @@ standard deviation ×
Dialog
- محاوره
+
Name
- نام
+
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
-
Add Relation
-
Remove Relation
-
@@ -44594,17 +44347,17 @@ standard deviation ×
Open Form
-
(no selection)
-
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -44612,67 +44365,65 @@ standard deviation ×
Rule properties
-
Label
-
Filter
- فیلتر
+
...
- ...
+
Test
- آزمودن
+
Description
-
Scale range
-
Symbol
-
Error
- خطا
+
Filter expression parsing error:
-
Evaluation error
- خطا ارزیابی
+
Filter returned %n feature(s)
number of filtered features
-
-
+
@@ -44709,7 +44460,7 @@ standard deviation ×
- expression -
-
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
This renderer doesn't implement a graphical interface.
-
@@ -44757,88 +44508,88 @@ standard deviation ×
Copy
- کپی
+
Paste
-
Change color
-
Change transparency
-
Change output unit
-
Change width
-
Change size
-
Transparency
- شفافیت
+
Change symbol transparency [%]
-
Symbol unit
-
Select symbol unit
-
Millimeter
-
Map unit
-
Width
- عرض
+
Change symbol width
-
Size
- اندازه
+
Change symbol size
-
@@ -44851,7 +44602,7 @@ standard deviation ×
<li><nobr>%1 features also in rule %2</nobr></li>
-
Count
-
Duplicate count
-
Max. scale
-
Number of features in this rule.
-
Number of features in this rule which are also present in other rule(s).
-
@@ -44899,103 +44650,103 @@ standard deviation ×
Add rule
-
Edit rule
-
Remove rule
-
Refine current rules
-
Count features
-
Rendering order...
-
Remove Rule
-
Refine current rule
-
Add scales to rule
-
Add categories to rule
-
Add ranges to rule
-
Refine a rule to categories
-
Refine a rule to ranges
-
Scale refinement
-
Parent rule %1 must have a symbol for this operation.
-
Please enter scale denominators at which will split the rule, separate them by commas (e.g. 1000,5000):
-
Error
- خطا
+
"%1" is not valid scale denominator, ignoring it.
-
Calculating feature count.
-
Abort
-
@@ -45033,63 +44784,61 @@ standard deviation ×
Database does not exist
-
Failed to open database
-
Failed to check metadata
-
Failed to get list of tables
-
Unknown error
-
Delete
- حذف
+
%1: Not a vector layer!
- %1 لایه وکتود وجود ندارد!
+
%1: OK!
- %1 : تایید!
+
Import to SpatiaLite database
-
Failed to import some layers!
- ورود برخی از لایه های ناموفق بود!
-
-
+
Import was successful.
- ورود موفق بود.
+
@@ -45122,12 +44871,12 @@ standard deviation ×
New SpatiaLite Database File
- فایل جدید بانک اطلاعات SpatiaLite
+
SpatiaLite
- SpatiaLite
+
Texture width
-
SVG file
-
Millimeter
-
Map unit
-
Select SVG texture file
-
All files
- همه فایلها
+
Rotation
-
Color
- رنگ
+
Border color
-
Border width
- عرض حاشیه
+
@@ -45208,32 +44957,32 @@ standard deviation ×
Save style in database
-
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
@@ -45241,37 +44990,37 @@ standard deviation ×
Save style
-
Description
-
UI
-
Style Name
-
Use as default style for this layer
-
Open...
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45280,29 +45029,29 @@ standard deviation ×
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -45310,7 +45059,7 @@ standard deviation ×
Scale visibility
-
@@ -45318,81 +45067,79 @@ standard deviation ×
Search query builder
-
&Test
- &تست
+
&Clear
-
&Save...
-
Save query to an xml file
-
&Load...
-
Load query from xml file
-
Search results
-
Found %n matching feature(s).
test result
-
-
+
Search string parsing error
-
Evaluation error
- خطا ارزیابی
+
Error during search
-
No Records
-
The query you specified results in zero records being returned.
-
Save query to file
-
Error
- خطا
+
Could not open file for writing
-
Load query from file
-
Query files
-
All files
- همه فایلها
+
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
Select attribute
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -45453,45 +45200,43 @@ standard deviation ×
Validation started.
- شروع اعتبار سنجی .
+
Validation finished (%n error(s) found).
number of geometry errors
-
-
+
ring %1, vertex %2
-
polygon %1, ring %2, vertex %3
-
polyline %1, vertex %2
-
vertex %1
-
point %1
-
single point
-
@@ -45541,48 +45286,48 @@ The error was:
Millimeter
-
Map unit
-
Color (start)
-
Color (end)
-
Blur radius
-
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -45591,28 +45336,28 @@ The error was:
Millimeter
-
Map unit
-
Color
- رنگ
+
Border color
-
Border width
- عرض حاشیه
+
@@ -45622,44 +45367,44 @@ The error was:
Millimeter
-
Map unit
-
Color
- رنگ
+
Pen width
- پهنا قلم
+
Offset
- افست
+
Dash pattern
-
Join style
- اتصال سبک ها
+
Cap style
- سبک کلاهک
+
@@ -45669,54 +45414,54 @@ The error was:
Millimeter
-
Map unit
-
Name
- نام
+
Fill color
-
Border color
-
Outline width
-
Angle
- زاویه
+
Offset
- افست
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -45724,12 +45469,12 @@ The error was:
Black to white
-
White to black
-
Contrast
enhancement
-
Color gradient
-
@@ -45795,7 +45540,7 @@ enhancement
Discrete
-
Linear
-
Exact
-
Continuous
-
Equal interval
-
Custom color map entry
-
Load Color Map
-
The color map for band %1 has no entries
-
Open file
- باز کردن فایل
+
Textfile (*.txt)
-
Import Error
-
The following lines contained errors
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Save file
- ذخیره فایل
+
QGIS Generated Color Map Export File
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
@@ -45902,22 +45647,22 @@ enhancement
Form
- فرم
+
Band
- باند
+
Color interpolation
-
Add values manually
-
...
- ...
+
Remove selected row
-
Sort colormap items
-
Load color map from band
-
Load color map from file
-
Export color map to file
-
Color
- رنگ
+
Label
-
Clip
-
Generate new color map
-
Mode
- حالت
+
Classes
- کلاس
+
Min
- حد پایین
+
Max
- حد بالا
+
Invert
-
Classify
-
Min / max origin:
-
Min / Max origin
-
@@ -46033,32 +45778,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -46079,22 +45824,22 @@ enhancement
ALL the constraints
-
any ONE of the constraints
-
Invalid name
-
The smart group name field is empty. Kindly provide a name
-
@@ -46130,34 +45875,34 @@ enhancement
Snapping and Digitizing Options
-
to vertex
-
to segment
-
to vertex and segment
-
map units
-
pixels
- پیکسل
+
@@ -46165,47 +45910,47 @@ enhancement
Snapping options
-
Layer
- لایه
+
Mode
- حالت
+
Tolerance
- دامنه تغییرات
+
Units
-
Avoid Int.
-
Avoid intersections of new polygons
-
Enable topological editing
-
Enable snapping on intersection
-
@@ -46213,7 +45958,7 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
UNKNOWN
-
GEOMETRY
-
POINT
-
LINESTRING
-
POLYGON
-
MULTIPOINT
-
MULTILINESTRING
-
MULTIPOLYGON
-
GEOMETRYCOLLECTION
-
@@ -46284,27 +46029,27 @@ enhancement
Binary object (BLOB)
-
Text
- متن
+
Decimal number (double)
-
Whole number (integer)
- مجموع اعداد ( صحیح )
+
Retrieval of spatialite version failed
-
SpatiaLite
- SpatiaLite
+
Could not parse spatialite version string '%1'
-
SQLite error: %2
SQL: %1
-
unknown cause
-
FAILURE: Field %1 not found.
-
@@ -46391,51 +46136,51 @@ SQL: %1
Add SpatiaLite Table(s)
-
Databases
-
&Update statistics
-
&Add
- &اضافه
+
&Set Filter
-
Wildcard
-
RegExp
-
All
-
Table
- جدول
+
Geometry column
-
Sql
- اس کیو ال
+
Confirm Update Statistics
-
Update Statistics
-
Internal statistics successfully updated for: %1
-
Error while updating internal statistics for: %1
-
@
- @
+
Choose a SpatiaLite/SQLite DB to open
-
SpatiaLite DB
-
All files
- همه فایلها
+
Error
- خطا
+
Cannot add connection '%1' : a connection with the same name already exists.
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Select Table
-
You must select a table in order to add a Layer.
-
SpatiaLite DB Open Error
-
Database does not exist: %1
-
Failure while connecting to: %1
%2
-
SpatiaLite getTableInfo Error
-
Failure exploring tables from: %1
%2
-
SpatiaLite Error
-
Unexpected error when working with: %1
%2
-
@@ -46635,137 +46380,135 @@ but implies better performance thereafter.
The spatial query requires at least two vector layers
-
%n selected geometries
selected geometries
-
-
+
Selected geometries
-
%1)Query
-
Begin at %L1
-
< %1 >
-
Total of features = %1
-
Total of invalid features:
-
Finish at %L1 (processing time %L2 minutes)
-
Using the field "%1" for subset
-
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
%1 of %2
-
all = %1
-
%1 of %2(selected features)
-
Create new selection
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
user
-
Map "%1" "on the fly" transformation.
-
enable
-
disable
-
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Missing reference layer
-
Select reference layer!
-
Missing target layer
-
Select target layer!
-
Create new layer from items
-
The query from "%1" using "%2" in field not possible.
-
Create new layer from selected
-
%1 of %2 identified
-
@@ -46827,76 +46570,76 @@ CRS of map is %1.
Spatial Query
-
Layer on which the topological operation will select geometries
-
Select source features from
-
Select the target layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
-
Selected feature(s) only
-
Where the feature
-
Select the topological operation
-
Layer whose geometries will be used as reference by the topological operation
-
Reference features of
-
Select the reference layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
-
And use the result to
-
Number of selected features in map
-
Create layer with selected
-
Result feature ID's
-
Select one FID to identify geometry of feature
-
Create layer with list of items
-
Zoom to item
-
Check to show log processing of query
-
Log messages
-
Run query or close the window
-
@@ -46975,38 +46718,38 @@ p, li { white-space: pre-wrap; }
Select a Spatialite Spatial Reference System
-
SRID
- SRID
+
Authority
-
Reference Name
-
Search
- جستجو
+
Filter
- فیلتر
+
Name
- نام
+
@@ -47014,12 +46757,12 @@ p, li { white-space: pre-wrap; }
File Name
-
Feature Class
-
DB Relation Name
-
Schema
- طرح
+
Are you sure you want to remove the [%1] connection and all associated settings?
-
Confirm Delete
-
Add Shapefiles
-
Shapefiles
-
All files
- همه فایلها
+
The following Shapefile(s) could not be loaded:
-
REASON: File cannot be opened
-
REASON: One or both of the Shapefile files (*.dbf, *.shx) missing
-
General Interface Help:
-
PostgreSQL Connections:
-
[New ...] - create a new connection
-
[Edit ...] - edit the currently selected connection
-
[Remove] - remove the currently selected connection
-
-you need to select a connection that works (connects properly) in order to import files
-
-when changing connections Global Schema also changes accordingly
-
Shapefile List:
-
[Add ...] - open a File dialog and browse to the desired file(s) to import
-
[Remove] - remove the currently selected file(s) from the list
-
[Remove All] - remove all the files in the list
-
[SRID] - Reference ID for the shapefiles to be imported
-
[Use Default (SRID)] - set SRID to -1
-
[Geometry Column Name] - name of the geometry column in the database
-
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
-
[Global Schema] - set the schema for all files to be imported into
-
[Import] - import the current shapefiles in the list
-
[Quit] - quit the program
-
[Help] - display this help dialog
-
Import Shapefiles
-
You need to specify a Connection first
-
Password for %1
-
Please enter your password:
-
Connection failed - Check settings and try again
-
PostGIS not available
-
<p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
-
You need to add shapefiles to the list first
-
Importing files
-
Cancel
- لغو
+
Progress
-
Problem inserting features from file:
-
%1
Invalid table name.
-
%1
No fields detected.
-
%1
The following fields are duplicates:
%2
-
Importing files
%1
-
%1
<p>Error while executing the SQL:</p><p>%2</p><p>The database said:%3</p>
-
Import Shapefiles - Relation Exists
-
%1 of %2 shapefiles could not be imported.
-
@@ -47319,132 +47062,132 @@ Do you want to overwrite the [%2] relation?
SPIT - Shapefile to PostGIS Import Tool
-
PostgreSQL connections
-
Connect to PostGIS
-
Connect
-
Create a new PostGIS connection
-
New
- جدید
+
Edit the current PostGIS connection
-
Edit
- ویرایش
+
Remove the current PostGIS connection
-
Remove
- حذف
+
Import options and shapefile list
-
Geometry column name
-
Set the geometry column name to the default value
-
Use default geometry column name
-
SRID
- SRID
+
Set the SRID to the default value
-
Use default SRID
-
Primary key column name
-
Global schema
-
Add a shapefile to the list of files to be imported
-
Add
- اضافه
+
Remove the selected shapefile from the import list
-
Remove all the shapefiles from the import list
-
Remove All
-
@@ -47452,18 +47195,18 @@ Do you want to overwrite the [%2] relation?
&Import Shapefiles to PostgreSQL
-
Import shapefiles into a PostGIS-enabled PostgreSQL database. The schema and field names can be customized on import
-
&Spit
-
@@ -47483,8 +47226,8 @@ Do you want to overwrite the [%2] relation?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47498,18 +47241,155 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
QgsSqlAnywhereProvider
- Error deleting features
- خطاي حذف کردن عوارض
+ Failed to load interface
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+ خطاي حذف کردن عوارض
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
- خطاي به روز رساني عوارض
+ خطاي به روز رساني عوارض
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
@@ -47517,163 +47397,163 @@ p, li { white-space: pre-wrap; }
Select all
- انتخاب همه
+
Clear selection
-
Import style(s)
-
file specified below
-
URL specified below
-
Select symbols to import
-
Import
-
Export style(s)
-
Export
-
Export/import error
-
You should select at least one symbol/color ramp.
-
Save styles
-
XML files (*.xml *.XML)
- XML files (*.xml *.XML)
+
Error when saving selected symbols to file:
%1
-
Import error
-
An error occured during import:
%1
-
Group Name
-
Please enter a name for new group:
-
imported
-
New Group
-
New group cannot be created without a name. Kindly enter a name.
-
New group
-
Cannot create a group without name. Enter a name.
-
Duplicate names
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
-
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
-
Load styles
-
XML files (*.xml *XML)
-
Downloading style ...
-
HTTP Error!
-
Download failed: %1.
-
@@ -47709,317 +47589,317 @@ Overwrite?
Type here to filter symbols...
-
Share Menu
-
Export
-
Import
-
Group Actions
-
Group Symbols
-
Edit Smart Group
-
Marker symbol (%1)
-
Line symbol (%1)
-
Fill symbol (%1)
-
Color ramp (%1)
-
Gradient
-
Random
-
ColorBrewer
-
cpt-city
-
new symbol
-
new marker
-
new line
-
new fill symbol
-
Symbol Name
-
Please enter a name for new symbol:
-
Save symbol
-
Cannot save symbol without name. Enter a name.
-
Symbol with name '%1' already exists. Overwrite?
-
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Color Ramp Name
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Cannot save color ramp without name. Enter a name.
-
Save color ramp
-
Color ramp with name '%1' already exists. Overwrite?
-
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
-
Invalid selection
-
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
Error!
- خطا!
+
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
Database Error
- خطاي پايگاه داده
+
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Add Group
-
Remove Group
-
Apply Group
-
Un-group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
@@ -48027,57 +47907,57 @@ There was a problem with your symbol database.
Style Manager
- مدیریت سبک نگارش
+
Marker
- نشانگر
+
Line
- خطی
+
Fill
- پر کردن
+
Color ramp
-
Tags
-
Add item
-
Edit item
-
Edit
- ویرایش
+
Remove item
-
Share
-
@@ -48085,51 +47965,51 @@ There was a problem with your symbol database.
Select vector layers to add...
-
Layer ID
-
Layer name
-
Number of features
-
Geometry type
-
Select raster layers to add...
-
Select layers to add...
-
Type
- نوع
+
Select All
- انتخاب همه
+
@@ -48137,12 +48017,12 @@ There was a problem with your symbol database.
Select layers to load
-
1
- 1
+
@@ -48150,22 +48030,22 @@ There was a problem with your symbol database.
SVG annotation
-
Delete
- حذف
+
Select SVG file
- انتخاب فایل SVG
+
SVG files
- فایل SVG
+
@@ -48173,23 +48053,23 @@ There was a problem with your symbol database.
SVG request failed [error: %1 - url: %2]
-
SVG
-
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -48197,17 +48077,17 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48217,14 +48097,14 @@ There was a problem with your symbol database.
Millimeter
-
Map unit
-
Border width
- عرض حاشیه
+
Angle
- زاویه
+
Offset
- افست
+
SVG file
-
Color
- رنگ
+
Border color
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -48282,12 +48162,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -48295,17 +48175,17 @@ There was a problem with your symbol database.
Select SVG file
- انتخاب فایل SVG
+
SVG files
- فایل SVG
+
File not found
-
@@ -48313,17 +48193,17 @@ There was a problem with your symbol database.
Size
- اندازه
+
area
- مساحت
+
diameter
-
@@ -48349,7 +48229,7 @@ There was a problem with your symbol database.
Define the order in which the symbol layers are rendered. The numbers in the cells define in which rendering pass the layer will be drawn.
-
@@ -48357,27 +48237,27 @@ There was a problem with your symbol database.
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
@@ -48385,42 +48265,42 @@ There was a problem with your symbol database.
Symbol selector
-
Add symbol layer
-
Remove symbol layer
-
Lock layer's color
-
Move up
-
Move down
-
Save symbol
-
Save
-
@@ -48428,42 +48308,42 @@ There was a problem with your symbol database.
Millimeter
-
Map unit
-
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
Transparency %1%
-
@@ -48471,18 +48351,18 @@ There was a problem with your symbol database.
Linear
-
Clough-Toucher (cubic)
-
Save triangulation to file
-
@@ -48536,12 +48416,12 @@ There was a problem with your symbol database.
B
-
I
-
@@ -48549,17 +48429,17 @@ There was a problem with your symbol database.
Form
- فرم
+
Multiline
- تعدادی خط
+
HTML
-
@@ -48572,7 +48452,7 @@ There was a problem with your symbol database.
Tile scale
-
@@ -48580,172 +48460,172 @@ There was a problem with your symbol database.
QGIS Publications
-
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
Become an QGIS translator
-
QGIS Mailing lists
-
Is it 'QGIS' or 'Quantum GIS'?
-
QGIS is open source
-
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
Moving Elements and Maps in the Print Composer
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -48766,21 +48646,21 @@ There was a problem with your symbol database.
QGIS Tips!
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
-
I've had enough tips, don't show this on start up any more!
-
@@ -48788,42 +48668,42 @@ p, li { white-space: pre-wrap; }
Dialog
- محاوره
+
Select transformation type:
-
Linear
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin plate spline (TPS)
-
Generate ESRI world file (.tfw)
-
@@ -48831,54 +48711,54 @@ p, li { white-space: pre-wrap; }
Transformation settings
-
Transformation type:
-
Resampling method:
-
Nearest neighbour
-
Linear
-
Cubic
-
Cubic Spline
-
Lanczos
-
Compression:
-
Output raster:
-
...
- ...
+
Target SRS:
-
Generate pdf report:
-
Set Target Resolution
-
Horizontal
- افقی
+
Vertical
-
Create world file
-
Generate pdf map:
-
Use 0 for transparency when needed
-
Load in QGIS when done
-
Helmert
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin Plate Spline
-
Projective
-
Info
- اطلاعات
+
Please set output name
-
%1 requires at least %2 GCPs. Please define more
-
Invalid output file name
-
Save raster
-
Select save PDF file
-
PDF Format
-
_modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -49014,17 +48894,17 @@ p, li { white-space: pre-wrap; }
Form
- فرم
+
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Editable
-
@@ -49032,12 +48912,12 @@ p, li { white-space: pre-wrap; }
Form
- فرم
+
Adjust scaling range
-
@@ -49045,18 +48925,18 @@ p, li { white-space: pre-wrap; }
Select a file
-
Error
- خطا
+
Could not open file %1
Error was:%2
-
@@ -49064,37 +48944,37 @@ Error was:%2
Form
- فرم
+
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
-
Value
-
Description
-
Remove Selected
-
@@ -49102,7 +48982,7 @@ Error was:%2
Edit filter expression
-
@@ -49110,52 +48990,52 @@ Error was:%2
Form
- فرم
+
Select layer, key column and value column
-
Layer
- لایه
+
Key column
- کليد ستون
+
Value column
-
Allow null value
-
Order by value
-
Allow multiple selections
-
Filter expression
-
...
- ...
+
@@ -49163,7 +49043,7 @@ Error was:%2
(no selection)
-
@@ -49171,7 +49051,7 @@ Error was:%2
ColorBrewer ramp
-
Codec %1 not found. Falling back to system locale
-
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -49280,46 +49160,46 @@ Error was:%2
Discrete
-
Continuous
-
Gradient file : %1
-
License file : %1
-
Edit Stop Color
-
Offset of the stop
-
Please enter offset in percents (%) of the new stop
-
Add Color Stop
-
@@ -49327,23 +49207,23 @@ Error was:%2
Gradient color ramp
-
Color 1
-
Color 2
-
Change...
-
Multiple stops
-
Add stop
-
Remove stop
-
Color
- رنگ
+
Offset (%)
-
Preview
-
Information
- اطلاعات
+
@@ -49391,130 +49271,130 @@ Error was:%2
Updating feature count for layer %1
-
Abort
-
ERROR: no provider
-
ERROR: layer not editable
-
Commit errors:
%1
-
General
- عمومی
+
Layer comment
-
Storage type of this layer
-
Description of this provider
-
Source for this layer
-
Geometry type of the features in this layer
-
Primary key attributes
-
The number of features in this layer
-
Editing capabilities of this layer
-
Extents
-
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
Error: qgis element could not be found
-
xMin,yMin %1,%2 : xMax,yMax %3,%4
-
unknown extent
-
(Invalid transformation of layer extents)
-
Field
-
Length
- طول
+
Precision
- دقت
+
Comment
- توضیح
+
@@ -49543,141 +49423,115 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
-
+
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
-
+
SUCCESS: %n attribute(s) added.
added attributes count
-
-
+
ERROR: %n new attribute(s) not added
not added attributes count
-
-
+
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
-
+
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
-
+
SUCCESS: %n feature(s) deleted.
deleted features count
-
-
+
ERROR: %n feature(s) not deleted.
not deleted features count
-
-
+
SUCCESS: %n feature(s) added.
added features count
-
-
+
ERROR: %n feature(s) not added.
not added features count
-
-
+
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
-
+
ERROR: %n geometries not changed.
not changed geometries count
-
-
+
Provider errors:
-
@@ -49687,99 +49541,99 @@ Error was:%2
QGIS Layer Style File
-
SLD File
-
Load from file
- بارگذاری از فایل
+
Load from database
-
Save in database (%1)
-
Layer Properties - %1
- خواص لایه - %1
+
Stop editing mode to enable this.
-
Insert expression
- قرار دادن عبارت
+
This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
-
The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
-
Not supported
-
Spatial Index
-
Creation of spatial index successful
-
Creation of spatial index failed
-
Load default style from:
-
Cancel
- لغو
+
Local database
-
Datasource database
-
Default Style
- پوسته پيش فرض
+
Loaded from Provider
-
No default style was found for this layer
-
Save default style to:
-
Load layer properties from style file
-
Load Style
-
Style saved
-
Save layer properties as style file
-
Saved Style
- ذخیره پوسته
+
Error occured retrieving styles from database
-
The retrieved style is not a valid named style. Error message: %1
-
Save Style
-
@@ -49852,140 +49706,140 @@ Error was:%2
Layer Properties
-
Restore Default Style
-
Save As Default
-
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
Description
-
Keyword list
- لیست کلمات کلیدی
+
DataUrl
-
Format
- قالب
+
Attribution
-
Url
-
MetadataUrl
-
Type
- نوع
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
-
Load Style ...
-
Save Style ...
-
Style
- سبک
+
Labels
-
Labels (deprecated)
-
Display labels
-
Fields
-
Specify the coordinate reference system of the layer's geometry.
-
Query Builder
-
Display
- نمایش
+
Rendering
- رندر
+
Layer info
-
Layer source
-
Data source encoding
-
Coordinate reference system
-
Specify...
-
Create spatial index
- ايجاد اندکس مکاني
+
Update extents
-
Scale dependent visibility
-
Feature subset
-
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
- پیکسل
+
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Map Tip display text
-
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
-
Inserts the selected field into the action
-
Insert field
-
HTML
-
Field
-
Layer name
-
displayed as
-
Metadata
- متاداده
+
Title
- عنوان
+
Abstract
- چکیده
+
Joins
-
Join layer
- لایه عضویت
+
Diagrams
-
@@ -50202,7 +50056,7 @@ Error was:%2
Layer CRS
- لايه سیستم مختصات مرجع
+
No symbology
-
Feature symbology
-
Symbol layer symbology
-
<Default>
-
Save layer as...
-
Select the coordinate reference system for the vector file. The data points will be transformed from the layer coordinate reference system.
-
@@ -50251,18 +50105,18 @@ Error was:%2
Save vector layer as...
-
Browse
- جستجو
+
Encoding
-
Symbology export
-
Datasource Options
-
Custom Options
-
Layer Options
-
Save as
-
Format
- قالب
+
Save only selected features
-
Data source
-
Layer
- لایه
+
This allows one to surpress attribute creation as some OGR drivers (eg. DGN, DXF) don't support it.
-
Skip attribute creation
-
Add saved file to map
-
1:
- 1:
+
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -50452,12 +50306,12 @@ Error was:%2
DescribeFeatureType failed for url %1
-
WFS
-
received %1 bytes from %2
-
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
@@ -50518,77 +50372,77 @@ Error was:%2
&Add
- &اضافه
+
&Build query
-
Build query
-
Network Error
-
Capabilities document is not valid
-
Server Exception
-
Error
- خطا
+
No Layers
-
capabilities document contained no layers.
-
Create a new WFS connection
- ایجاد اتصال جدید به WFS
+
Modify WFS connection
- اصلاح کردن اتصال WFS
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
@@ -50596,78 +50450,78 @@ Error was:%2
Add WFS Layer from a Server
-
Filter:
-
Display WFS FeatureTypes containing this word in the title, name or abstract
-
Server connections
-
C&onnect
- &اتصال
+
&New
- &جدید
+
Edit
- ویرایش
+
Delete
- حذف
+
Load connections from file
-
Load
- بارگذاری
+
Save connections to file
- ذخیره اتصال در فایل
+
Save
-
Use title for layer name
-
Coordinate reference system
-
Change ...
-
@@ -50683,17 +50537,17 @@ Error was:%2
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
&Add
- &اضافه
+
Add selected layers to map
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
-
Load connections
-
XML files (*.xml *XML)
-
encoding %1 not supported.
-
WMS Provider
-
Failed to parse WMS URI
-
Failed to download capabilities:
-
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
-
+
Select layer(s)
-
Select layer(s) or a tileset
-
Select either layer(s) or a tileset
-
Coordinate Reference System (%n available)
crs count
-
-
+
No common CRS for selected layers.
-
No image encoding selected
-
%n Layer(s) selected
selected layer count
-
-
+
Tileset selected
-
Could not understand the response. The %1 provider said:
%2
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
The %1 connection already exists. Do you want to overwrite it?
-
Confirm Overwrite
-
@@ -50882,52 +50730,52 @@ Error was:%2
Ready
- خواندن
+
Layers
- لایهها
+
C&onnect
- &اتصال
+
&New
- &جدید
+
Edit
- ویرایش
+
Delete
- حذف
+
Adds a few example WMS servers
-
Add default servers
-
ID
- شناسه
+
Name
- نام
+
Title
- عنوان
+
Abstract
- چکیده
+
Image encoding
-
Save connections to file
- ذخیره اتصال در فایل
+
Save
-
Load connections from file
-
Load
- بارگذاری
+
Options
-
Layer name
-
Coordinate Reference System
- سیستم های مرجع مختصات
+
Add Layer(s) from a WM(T)S Server
-
Change ...
-
Tile size
-
Feature limit for GetFeatureInfo
-
10
- 10
+
Layer Order
-
Move selected layer UP
-
Up
- بالا
+
Move selected layer DOWN
-
Down
- پايين
+
Layer
- لایه
+
Style
- سبک
+
Tilesets
-
Format
- قالب
+
Tileset
-
Server Search
-
Search
- جستجو
+
Description
-
URL
- مسیر
+
Add selected row to WMS list
-
@@ -51095,49 +50943,49 @@ Error was:%2
empty capabilities document
-
Tried URL: %1
-
Capabilities request redirected.
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
WCS
- WCS
+
%1 of %2 bytes of capabilities downloaded.
-
Exception
- استثنا
+
Could not get WCS capabilities: %1
-
Dom Exception
-
Version not supported
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -51183,7 +51031,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
- WCS
+
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51260,27 +51108,27 @@ Response was:
Cannot describe coverage
-
Coverage not found
-
Cannot calculate extent
-
Cannot get test dataset.
-
Received coverage has wrong extent %1 (expected %2)
-
WCS
- WCS
+
Rotating raster
-
Block read OK
-
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
Getting map via WCS.
-
No data received
-
Cannot create memory file
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request is for a Coverage not offered by the service instance.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
(No error code was reported)
-
(Unknown error code)
-
The WCS vendor also reported:
-
composed error message '%1'.
-
Cannot verify coverage full extent: %1
-
Property
-
Name (identifier)
-
Title
- عنوان
+
Abstract
- چکیده
+
Fixed Width
-
Fixed Height
-
Native Bounding Box
-
WGS 84 Bounding Box
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in format
-
Coverages
-
Cache Stats
-
Server Properties
-
Keywords
-
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
GetCapabilitiesUrl
-
Get Coverage Url
-
<font color="red">(advertised but ignored)</font>
-
And %1 more coverages
-
Format not supported
-
Read data error
-
RasterIO error:
-
@@ -51574,12 +51420,12 @@ Response was:
...
- ...
+
Select a file
-
@@ -51587,22 +51433,22 @@ Response was:
Form
- فرم
+
Field contains a filename or URL for a webpage
-
Width
- عرض
+
Height
- ارتفاع
+
@@ -51610,33 +51456,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
-
Capabilities request redirected.
-
Redirect loop detected: %1
-
WMS
- WMS
+
empty of capabilities: %1
-
Download of capabilities failed: %1
-
@@ -51644,7 +51490,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51692,22 +51538,22 @@ Response was:
Cannot parse URI
-
Cannot calculate extent
-
Cannot set CRS
-
Number of layers and styles don't match
-
WMS
- WMS
+
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
Getting map via WMS.
-
Getting tiles.
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
image is NULL
-
unexpected image size
-
Status: %1
Reason phrase: %2
-
Redirect loop detected: %1
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request contains a CRS not offered by the server for one or more of the Layers in the request.
-
Request contains a SRS not offered by the server for one or more of the Layers in the request.
-
GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
-
Request is for a Layer in a Style not offered by the server.
-
GetFeatureInfo request is applied to a Layer which is not declared queryable.
-
GetFeatureInfo request contains invalid X or Y value.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
-
Request contains an invalid sample dimension value.
-
Request is for an optional operation that is not supported by the server.
-
(No error code was reported)
-
(Unknown error code)
-
The WMS vendor also reported:
-
Property
-
Name
- نام
+
Visibility
-
Visible
-
Hidden
-
Title
- عنوان
+
Abstract
- چکیده
+
Can Identify
-
Yes
-
No
-
Can be Transparent
-
Can Zoom In
-
Cascade Count
-
Fixed Width
-
Fixed Height
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in style
-
LegendURLs
-
Server Properties
-
Selected Layers
-
Other Layers
-
Tile Layer Properties
-
Cache Stats
-
WMS Version
-
Keywords
-
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
Identify Formats
-
Layer Count
-
Tile Layer Count
-
GetCapabilitiesUrl
-
GetMapUrl
-
<font color="red">(advertised but ignored)</font>
-
GetFeatureInfoUrl
-
GetLegendGraphic
-
GetTileUrl
-
Tile templates
-
FeatureInfo templates
-
Tileset Properties
-
Identifier
-
Tile mode
-
WMTS
-
WMS-C
-
Invalid tile mode
-
Selected
-
Available Styles
-
Bounding Box
-
Available Tilesets
-
Selected tile matrix set
-
Scale
- مقیاس
+
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
Width
- عرض
+
Height
- ارتفاع
+
Top
- بالا
+
Left
- چپ
+
Bottom
- پایین
+
Right
- راست
+
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Cache stats
-
Hits
-
Misses
-
Errors
-
Format not supported
-
Context not fully specified (extent was defined but width and/or height was not).
-
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
GML schema is not valid
-
GML is not valid
-
Cannot identify
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
identify request redirected.
-
Map getfeatureinfo error %1: %2
-
Cannot parse getfeatureinfo: %1
-
Map getfeatureinfo error: %1 [%2]
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52398,18 +52230,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -52484,7 +52308,7 @@ Reason phrase: %2
Select dimensions
-
&Zonal statistics
-
Calculating zonal statistics...
-
Record Metadata
-
@@ -52582,93 +52406,93 @@ Reason phrase: %2
Transportation layer
-
Layer
- لایه
+
Direction field
-
Value for forward direction
-
Value for reverse direction
-
Value two-way direction
-
Speed field
-
km/h
-
m/s
-
Default settings
-
Direction
- جهت
+
Two-way direction
-
Forward direction
-
Reverse direction
-
Cost
-
Line lengths
-
Speed
- سرعت
+
Always use default
-
@@ -52719,105 +52543,105 @@ Reason phrase: %2
Shortest path
-
Start
-
Stop
-
Criterion
-
Length
- طول
+
Time
-
Calculate
- بر اورد کردن
+
Export
-
Clear
- تمیز
+
Help
- راهنما
+
Point not selected
-
First, select start and stop points.
-
Plugin isn't configured
-
Plugin isn't configured!
-
Tie point failed
-
Start point doesn't tie to the road!
-
Stop point doesn't tie to the road!
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
Path not found
-
@@ -52830,105 +52654,475 @@ Reason phrase: %2
Road graph plugin settings
- تنظیمات پلاگین گراف
+
Road graph
-
SLDatabase
Run &Vacuum
-
&Database
- &پایگاه دادهها
+
Sorry
- متاسفیم
+
No database selected or you are not connected to it.
-
SaDbTableModel
+ Schema
+
+
+ Table
+
+
+ Type
- نوع
+ نوع
+
+
+ SRID
+
+
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
+
+
+
+ SaNewConnection
+
+ Save connection
+
+
+ Should the existing connection %1 be overwritten?
+
+
+ Failed to load interface
+
+
+ Test connection
+
+
+ Connection to %1 was successful
+
+
+ Connection failed. Check settings and try again.
+
+SQL Anywhere error code: %1
+Description: %2
+
+
+
+ SaNewConnectionBase
+
+ Create a new SQL Anywhere connection
+
+
+ Connection Information
+
+
+ Name
+
+
+ Host
+
+
+ Port
+
+
+ Server
+
+
+ Database
+
+
+ Connection Parameters
+
+
+ Username
+
+
+ Password
+
+
+ Name of the new connection
+
+
+ Name or IP address of computer hosting the database server (leave blank for local connections)
+
+
+ Port number used by the database server (leave blank for default 2638)
+
+
+ Name of the database server (leave blank for default server on host)
+
+
+ Name of the database (leave blank for default database on server)
+
+
+ Additional connection parameters
+
+
+ Database username
+
+
+ Database password
+
+
+ Save the connection username in the registry
+
+
+ Save Username
+
+
+ &Test Connect
+
+
+ Save the connection password in the registry (WARNING: NOT SECURE)
+
+
+ Save Password
+
+
+ Encrypt packets using simple encryption
+
+
+ Simple Encryption
+
+
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
+
+
+ Estimate table metadata
+
+
+ Search for geometry columns in tables owned by other users
+
+
+ Search other users' tables
+
SaSourceSelect
+ &Add
+
+
+ &Set Filter
+
+
+ Wildcard
+
+
+ RegExp
+
+
+ All
+
+
+ Schema
+
+
+ Table
+
+
+ Type
- نوع
+ نوع
+
+
+ SRID
+
+
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
+
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+
+
+ Confirm Delete
+
+
+ Select Table
+
+
+ You must select a table in order to add a layer.
+
+
+ Failed to load interface
+
+
+ Connection failed
+
+
+ Connection to database %1 failed. Check settings and try again.
+
+SQL Anywhere error code: %2
+Description: %3
+
+
+ No accessible tables found
+
+
+ Database connection was successful, but no tables containing geometry columns were %1.
+
+
+ found
+
+
+ found in your schema
+
SaSourceSelectBase
+ Add SQL Anywhere layer
+
+
+ SQL Anywhere Connections
+
+
+ Delete
- حذف
+ حذف
+ Edit
- ویرایش
+ ویرایش
+ New
- جدید
+ جدید
+ Connect
- اتصال
+ اتصال
+ Search options
- جستجو تنظیمات
+ جستجو تنظیمات
+ Search
- جستجو
+ جستجو
+ Search mode
- نوع جستجو
+ نوع جستجو
+ Search in columns
- جستجو در ستون
+ جستجو در ستون
+
+
+
+ SaveAsPythonScriptAction
+
+ I/O error
+
+
+ Unable to save edits. Reason:
+ %s
+
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
-
I/O error
-
Unable to save edits. Reason:
%s
-
@@ -52989,231 +53183,231 @@ Reason phrase: %2
Editor
-
Auto-save script before running
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
-
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Font
- قلم
+
Size
- اندازه
+
Enable Object Inspector (switching between tabs may be slow)
-
Console
- کنسول
+
APIs
-
Using preloaded APIs file
-
Path
- مسیر
+
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
@@ -53221,12 +53415,12 @@ Reason phrase: %2
Simplify line tolerance
-
Set tolerance
-
SqlAnywhere
+ Add SQL Anywhere Layer...
- افزودن SQL در هر کجا لایه ...
+ افزودن SQL در هر کجا لایه ...
+ Store vector layers within a SQL Anywhere database
- ذخیره لایه بردار در هرجا پایگاه داده SQL
+ ذخیره لایه بردار در هرجا پایگاه داده SQL
+ Invalid Layer
- لایه بدون اعتبار
+ لایه بدون اعتبار
+ %1 is an invalid layer and cannot be loaded.
- %1 یک لایه نامعتبر است و نمی تواند بارگیری نمود.
+ %1 یک لایه نامعتبر است و نمی تواند بارگیری نمود.
@@ -53258,62 +53456,62 @@ Reason phrase: %2
Form
- فرم
+
Unit
-
Opacity
-
Color
- رنگ
+
Open Library
-
Size
- اندازه
+
Rotation
-
°
-
Width
- عرض
+
Symbols in group
-
Symbol Name
-
Advanced
-
@@ -53321,18 +53519,18 @@ Reason phrase: %2
TopologyChecker
-
Topology Checker for vector layer
-
&Topology Checker
-
@@ -53373,15 +53571,15 @@ Reason phrase: %2
Please specify input vector layer
- لطفا لایه برداری را معین کنید
+
Please specify input field
-
Please specify output shapefile
- لطفا فایل خروجی را معین کنید
+
Cancel
@@ -53389,18 +53587,18 @@ Reason phrase: %2
Geometry
- هندسی
+
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Feature
@@ -53415,51 +53613,51 @@ Reason phrase: %2
VisualDialog
Error!
- خطا!
+
Please specify input vector layer
- لطفا لایه برداری را معین کنید
+
Please specify input field
-
List unique values
-
Unique values
-
Total unique values
-
Basics statistics
-
Statistics output
-
Nearest neighbour analysis
-
Nearest neighbour statistics
-
Cancel
- لغو
+
Parameter
-
Value
@@ -53476,7 +53674,7 @@ Reason phrase: %2
Force point inside polygon
-
@@ -53484,92 +53682,92 @@ Reason phrase: %2
Form
- فرم
+
Colors
- رنگ ها
+
Fill
- پر کردن
+
Border
-
Left
- چپ
+
HCenter
-
Right
- راست
+
Top
- بالا
+
VCenter
-
Bottom
- پایین
+
Outline style
-
Outline width
-
Rotation
-
Anchor point
-
Data defined properties...
-
Offset X,Y
- افست X,Y
+
Symbol width
-
Symbol height
-
@@ -53577,72 +53775,72 @@ Reason phrase: %2
Form
- فرم
+
Offset X,Y
- افست X,Y
+
Rotation
-
Anchor point
-
Left
- چپ
+
HCenter
-
Right
- راست
+
Top
- بالا
+
VCenter
-
Bottom
- پایین
+
Size
- اندازه
+
Color
- رنگ
+
Font family
-
°
-
@@ -53650,120 +53848,120 @@ Reason phrase: %2
Form
- فرم
+
Two color
-
Color ramp
-
Gradient type
-
Linear
-
Radial
-
Conical
-
Coord mode
-
Object
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
x
- x
+
y
- y
+
Feature centroid
-
Reference Point 2
-
Angle
- زاویه
+
°
-
Data defined properties...
-
Offset X,Y
- افست X,Y
+
@@ -53781,7 +53979,7 @@ Reason phrase: %2
Data defined properties...
-
Offset along line
-
Data defined properties
-
Data defined properties...
-
Form
- فرم
+
Border width
- عرض حاشیه
+
Rotation
-
Texture width
-
Colors
- رنگ ها
+
Fill
- پر کردن
+
Border
-
Data defined properties...
-
SVG Groups
-
SVG Symbols
-
...
- ...
+
@@ -53948,57 +54146,57 @@ Reason phrase: %2
Form
- فرم
+
Gradient colors
-
Two color
-
Color ramp
-
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Blur strength
-
Offset X,Y
- افست X,Y
+
Data defined properties...
-
@@ -54026,7 +54224,7 @@ Reason phrase: %2
Colors
- رنگ ها
+
Join style
- اتصال سبک ها
+
Data defined properties...
-
Fill
- پر کردن
+
Border
-
@@ -54109,12 +54307,12 @@ Reason phrase: %2
Data defined properties...
-
Draw line only inside polygon
-
@@ -54132,67 +54330,67 @@ Reason phrase: %2
Fill
- پر کردن
+
Border
-
Outline style
-
Outline width
-
Anchor point
-
Left
- چپ
+
HCenter
-
Right
- راست
+
Top
- بالا
+
VCenter
-
Bottom
- پایین
+
Data defined properties...
-
Colors
- رنگ ها
+
°
-
Form
- فرم
+
Colors
- رنگ ها
+
Fill
- پر کردن
+
Border
-
Offset X,Y
- افست X,Y
+
Anchor point
-
Left
- چپ
+
HCenter
-
Right
- راست
+
Top
- بالا
+
VCenter
-
Bottom
- پایین
+
Data defined properties...
-
Border width
- عرض حاشیه
+
Angle
- زاویه
+
Size
- اندازه
+
SVG Groups
-
SVG Image
-
...
- ...
+
@@ -54313,32 +54511,32 @@ Reason phrase: %2
Form
- فرم
+
SVG Images
-
SVG Groups
-
...
- ...
+
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
-
@@ -54346,12 +54544,12 @@ Reason phrase: %2
Form
- فرم
+
Y attribute
- مشخصه Y
+
X attribute
- مشخصه X
+
Vector field type
-
Height only
-
Polar
-
Cartesian
-
Angle units
-
Degrees
- درجه
+
Radians
- رادیان
+
Angle orientation
-
Counterclockwise from east
-
Clockwise from north
-
Distance unit
- واحد فاصله
+
@@ -54424,17 +54622,17 @@ Reason phrase: %2
XML Request / Response
-
Request
-
Response
-
@@ -54455,59 +54653,59 @@ Reason phrase: %2
Topology Checker
-
Validate All
-
Validate Extent
-
Topology not checked yet
-
Configure
-
Show topology errors
-
Show errors
-
Select automatic fix
-
Fix!
-
No errors were found
-
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
Abort
-
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -54717,7 +54915,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -54727,7 +54925,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -56152,13 +56428,13 @@ Click on one of the icons along the top of the composer window to select what ty
Converts DXF files in Shapefile format
-
&Dxf2Shp
-
@@ -56166,69 +56442,69 @@ Click on one of the icons along the top of the composer window to select what ty
Dxf Importer
-
Input and output
-
Input DXF file
-
...
- ...
+
Output file
-
Export text labels
-
Output file type
-
Polyline
-
Polygon
- چند ضلعی
+
Point
- نقطه
+
Warning
- هشدار
+
Please specify a file to convert.
-
Please specify an output file
-
Choose a DXF file to open
-
DXF files
-
Choose a file name to save to
-
Shapefile
-
@@ -56271,32 +56547,32 @@ For support send a mail to scala@itc.cnr.it
eVis Database Connection
-
eVis Event Id Tool
-
eVis Event Browser
-
Create layer from a database query
-
Open an Event Browers and display the selected feature
-
Open an Event Browser to explore the current layer's features
-
@@ -56305,12 +56581,12 @@ For support send a mail to scala@itc.cnr.it
Undefined
-
No predefined queries loaded
-
Open File
-
New Database connection requested...
-
Error: You must select a database type
-
Error: No host name entered
-
Error: No database name entered
-
Connection to [%1.%2] established
-
connected
-
Tables
-
Connection to [%1.%2] failed: %3
-
Error: Parse error at line %1, column %2: %3
-
Error: Unabled to open file [%1]
-
Error: Query failed: %1
-
Error: Could not create temporary file, process halted
-
Error: A database connection is not currently established
-
@@ -56393,145 +56669,145 @@ For support send a mail to scala@itc.cnr.it
Database Connection
-
Predefined Queries
-
Load predefined queries
-
Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide.
-
The description of the selected query.
-
Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
-
not connected
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
-
Database Host
-
Enter the database host. If the database resides on your desktop you should enter ¨localhost¨. If you selected ¨MSAccess¨ as the database type this option will not be available.
-
Password to access the database.
-
Enter the name of the database.
-
Username
- کاربری
+
Enter the port through which the database must be accessed if a MYSQL database is used.
-
Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established.
-
Connect
-
User name to access the database.
-
Select the type of database from the list of supported databases in the drop-down menu.
-
Database Name
-
Password
- کلمه عبور
+
Database Type
-
Port
- درگاه
+
SQL Query
-
Run the query entered above. The status of the query will be displayed in the Output Console below.
-
Run Query
-
Enter the query you want to run in this window.
-
A window for status messages to be displayed.
-
Output Console
-
@@ -56539,37 +56815,37 @@ p, li { white-space: pre-wrap; }
Database File Selection
-
The name of the field that contains the Y coordinate of the points.
-
The name of the field that contains the X coordinate of the points.
-
Enter the name for the new layer that will be created and displayed in QGIS.
-
Y Coordinate
- مختصاتY
+
X Coordinate
- مختصاتX
+
Name of New Layer
-
@@ -56577,12 +56853,12 @@ p, li { white-space: pre-wrap; }
Generic Event Browser
-
Field
-
Warning
- هشدار
+
This tool only supports vector data
-
No active layers found
-
Error
- خطا
+
Unable to connect to either the map canvas or application interface
-
An invalid feature was received during initialization
-
Event Browser - Displaying records 01 of %1
-
Attribute Contents
-
Event Browser - Displaying records %1 of %2
-
Select Application
-
All ( * )
-
@@ -56657,82 +56933,82 @@ p, li { white-space: pre-wrap; }
Display
- نمایش
+
Use the Previous button to display the previous photo when more than one photo is available for display.
-
Previous
-
Use the Next button to display the next photo when more than one photo is available for display.
-
Next
-
All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green.
-
1
- 1
+
Image display area
-
Display area for the image.
-
Options
-
File path
-
Attribute containing path to file
-
Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
-
If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
-
Path is relative
-
If checked, the relative path values will be saved for the next session.
-
Remember this
-
Reset to default
-
Resets the values on this line to the default setting.
-
Reset
- بارگزاری مجدد
+
Compass bearing
-
Attribute containing compass bearing
-
Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
-
If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
-
Display compass bearing
-
If checked, the Display Compass Bearing values will be saved for the next session.
-
Compass offset
-
Define the compass offset manually.
-
Manual
- دستی
+
A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
Define the compass offset using a field from the vector layer attribute table.
-
From Attribute
-
Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
If checked, the compass offset values will be saved for the next session.
-
Resets the compass offset values to the default settings.
-
Relative paths
-
The base path or url from which images and documents can be “relative”
-
Base Path
-
The Base Path onto which the relative path defined above will be appended.
-
If checked, the Base Path will be saved for the next session.
-
Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
-
If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
-
Replace entire path/url stored in image path attribute with user defined
Base Path (i.e. keep only filename from attribute)
-
If checked, the current check-box setting will be saved for the next session.
-
Clears the check-box on this line.
-
If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
-
Apply Path to Image rules when loading docs in external applications
-
Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
-
Configure External Applications
-
File extension and external application in which to load a document of that type
-
A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
-
Extension
-
Application
- برنامه کاربردی
+
Add new file type
-
Add a new file type with a unique extension and the path for the application that can open the file.
-
Delete current row
-
Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
-
@@ -56965,234 +57241,234 @@ Base Path (i.e. keep only filename from attribute)
Zoom in
-
Zoom in to see more detail.
-
Zoom out
-
Zoom out to see more area.
-
Zoom to full extent
-
Zoom to display the entire image.
-
fTools
QGIS version detected:
-
This version of fTools requires at least QGIS version 1.0.0
Plugin will not be enabled.
-
&Analysis Tools
-
Distance matrix
- طول ماتریکس
+
Sum line lengths
- مجموع مسافت خط ها
+
Points in polygon
-
Basic statistics
-
List unique values
-
Nearest neighbour analysis
-
Mean coordinate(s)
-
Line intersections
- تقاطع خط
+
&Research Tools
-
Random selection
- انتخاب تصادفی
+
Random selection within subsets
- انتخاب تصادفی در داخل زیر مجموعه ها
+
Random points
-
Regular points
- نقطه های متقارن
+
Vector grid
- شبکه وکتور
+
Select by location
- انتخاب برپایه مکان
+
Polygon from layer extent
-
&Geoprocessing Tools
-
Convex hull(s)
-
Buffer(s)
-
Intersect
-
Union
-
Symetrical difference
-
Clip
-
Dissolve
-
Difference
-
Eliminate sliver polygons
- برش زدن چند ضلعی
+
G&eometry Tools
-
Export/Add geometry columns
-
Check geometry validity
- بررسی اعتبار هندسه
+
Polygon centroids
-
Delaunay triangulation
-
Voronoi Polygons
-
Extract nodes
- استخراج گره ها
+
Simplify geometries
- ساده سازی هندسی
+
Densify geometries
- متراکم سازی هندسی
+
Multipart to singleparts
-
Singleparts to multipart
-
Polygons to lines
-
Lines to polygons
-
&Data Management Tools
-
Define current projection
- تعریفهای نقشه فعلی
+
Join attributes by location
- اتصال صفات با استفاده از مکان
+
Split vector layer
- تقسیم لایه برداری
+
Merge shapefiles to one
-
Create spatial index
- ايجاد اندکس مکاني
+
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -57208,1857 +57484,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -59111,10 +59333,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59128,10 +59350,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -59152,10 +59374,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -59168,12 +59390,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -59189,16 +59411,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -59227,15 +59449,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -59252,17 +59474,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -59276,17 +59498,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -59302,16 +59524,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -59325,10 +59547,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -59341,10 +59563,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -59358,12 +59580,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -59377,12 +59599,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -59397,17 +59619,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -59417,10 +59639,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -59435,12 +59657,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -59454,12 +59676,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -59473,10 +59695,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -59493,12 +59715,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -59512,17 +59734,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -59537,10 +59759,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -59551,12 +59773,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -59570,17 +59792,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -59593,12 +59815,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -59615,14 +59837,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -59636,15 +59858,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -59653,15 +59875,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -59692,14 +59914,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -59718,14 +59940,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -59830,12 +60052,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -59849,10 +60071,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -59866,10 +60088,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -59886,10 +60108,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -59905,36 +60127,36 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
geometryThread
Merge all
- ادغام کردن همه
+
Polygon area
-
Polygon perimeter
-
Line length
-
Point x ordinate
-
Point y ordinate
-
@@ -60467,7 +60689,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Create parallel line to input lines
-
Create points along input lines
-
Create points/segments from input vector lines and positions
-
Create quantization file for floating-point raster
-
Create random 2D/3D vector points
-
Create random cell values with spatial dependence
-
Create random raster
-
Create random vector point contained in raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create slope raster from DEM (digital elevation model)
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
DXF vector layer
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
E00 vector layer
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export raster as non-georeferenced PNG image format
-
Export raster from GRASS
-
Export raster series to MPEG movie
-
Export raster to 8/24bit TIFF image at the resolution of the current region
-
Export raster to ASCII text file
-
Export raster to ESRI ARCGRID
-
Export raster to GRIDATB.FOR map file (TOPMODEL)
-
Export raster to Geo TIFF
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to VTK-ASCII
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Hydrologic modelling
-
Imagery
-
Import ASCII raster
-
Import DXF vector
-
Import ESRI ARC/INFO ASCII GRID
-
Import ESRI E00 vector
-
Import GDAL supported raster
-
Import GDAL supported raster and create a fitted location
-
Import GRIDATB.FOR (TOPMODEL)
-
Import MapGen or MatLab vector
-
Import OGR vector
-
Import OGR vector and create a fitted location
-
Import OGR vectors in a given data source combining them in a GRASS vector
-
Import SPOT VGT NDVI
-
Import SRTM HGT
-
Import US-NGA GEOnet Names Server (GNS) country file
-
Import all OGR/PostGIS vectors in a given data source and create a fitted location
-
Import attribute tables in various formats
-
Import binary MAT-File(v4)
-
Import binary raster
-
Import from database into GRASS
-
Import geonames.org country files
-
Import into GRASS
-
Import loaded raster
-
Import loaded raster and create a fitted location
-
Import loaded vector
-
Import loaded vector and create a fitted location
-
Import only some layers of a DXF vector
-
Import raster from ASCII polygon/line
-
Import raster from coordinates using univariate statistics
-
Import raster into GRASS
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Network analysis
-
Network maintenance
-
Number of rows to be skipped
-
Others
-
Output GML file
-
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Projection conversion of vector
-
Projection management
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster
- رستر
+
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reports
-
Reports and statistics
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
-
Split lines to shorter segments
-
Statistics
-
Sum raster cell values
-
Surface management
-
Tables management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Terrain analysis
-
Tests of normality on vector points
-
Text file
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform features
-
Transform image
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
-
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector
- وکتور
+
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
optionsDialog
Warning!
-
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -62178,59 +62400,59 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Current Rules
-
Add Rule
-
Rule
- قانون
+
Layer #1
-
Layer #2
-
Tolerance
- دامنه تغییرات
+
Layer1ID
-
Layer2ID
-
No layer
- لایه ای نیست
+
Delete Rule
-
@@ -62238,7 +62460,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid second geometry.
-
Topology plugin
-
Invalid first geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
visualThread
Max. len:
-
Min. len:
-
Mean. len:
-
Filled:
-
Empty:
-
N:
-
Mean:
-
StdDev:
-
Sum:
-
Min:
-
Max:
-
CV:
-
Number of unique values:
-
Range:
-
Median:
-
Observed mean distance:
-
Expected mean distance:
-
Nearest neighbour index:
-
Z-Score:
-
@@ -62438,17 +62660,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- فرم
+
Open number input dialog
-
...
- ...
+
@@ -62456,12 +62678,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- فرم
+
...
- ...
+
-
+
\ No newline at end of file
diff --git a/i18n/qgis_fi.ts b/i18n/qgis_fi.ts
index 840a2f413e0..27d26e98412 100644
--- a/i18n/qgis_fi.ts
+++ b/i18n/qgis_fi.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Kirjasto:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<varooitus> geometry_columns taulua ei ole!
Tämä taulu on tarpeellinen useille GIS sovellutuksille taulujen laskentaa varten.
@@ -417,13 +415,13 @@ Tämä taulu on tarpeellinen useille GIS sovellutuksille taulujen laskentaa vart
Skripti:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<varoitus> Asennetujen skriptien versiot eivät vastaa julkaistujen skriptien versioita!
Tämä lienee tuloksena virheellisestä PostGIS päivityksestä.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<varoitus> Tällä käyttäjällä ei ole oikeuksia lukea geometry_columns taulun sisältöä!
Tämä taulu on tarpeellinen useille GIS sovellutuksille taulujen laskentaa varten.
@@ -2098,7 +2096,7 @@ Tämä voi johtaa ennalta arvaamattomaan lopputulokseen.
pituustieto
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Ei voida poistaa olemassa olevaa shapefile tiedostoa
%s
@@ -2407,47 +2405,24 @@ Haluatko varmasti jatkaa?
poistetaan nykyisestä valinnasta
- Select by location
Valitse sijainnilla
- Select features in:
Valitse kohteet:
- that intersect features in:
joka leikkaa kohteet:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Muokkaa nykyistä valintaa:
+ Muokkaa nykyistä valintaa:
Use selected features only
- Käytä ainoastaan valittuja kohteita
+ Käytä ainoastaan valittuja kohteita
Please specify select layer
@@ -3409,7 +3384,7 @@ Liitännäistä ei voida ottaa käyttöön.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4727,7 +4702,7 @@ painettaessa työkalu valintaikkunan Apua painiketta.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Näytä aineisto 1 kaistalta väritauluaineistolla 3 (RGB) tai 4 (RGBA) kaistoilta.
Käyttökelpoinen tulostusajureille kuten JPEG, JPEG2000, MrSID, ECW jotka eivät tue indeksoituja väriaineistoja.
@@ -5526,7 +5501,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&Muokkaa
@@ -5546,157 +5521,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Valitse
- Measure
Mittaus
- &Decorations
&Koristelut
- &Layer
&Tasot
- New
Uusi
- &Plugins
&Liitännäiset
- &Help
&Ohje
- &Settings
&Asetukset
- &Raster
&Rasteri
- Vect&or
Vekt&ori
- &OpenStreetMap
&OpenStreetMap
- File
Tiedosto
- Manage Layers
Hallitse tasoja
- Digitizing
Digitointi
- Advanced Digitizing
Kehittynyt digitointi
- Map Navigation
Karttanavigointi
- Attributes
Ominaisuudet
- Plugins
Liitännäiset
- Help
Ohje
- Raster
Rasteri
- Label
Nimiö
- Vector
Vektori
- Database
Tietokanta
- Web
Verkkosivu
- Ctrl+N
Ctrl+U
- Ctrl+O
Ctrl+A
- Ctrl+S
Ctrl+T
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Tallenna kuvana...
- &New Print Composer
&Uusi tulosteen muodostus
- Ctrl+P
Ctrl+SHIFT+U
- Composer Manager...
Tulosteen muodostuksen hallinta...
@@ -5716,948 +5691,940 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Uusi mallista
- Preview Mode
Esikatselun tila
- Paste Features as
Liitä ominaisuudet kuten
- &New
&Uusi
- &Open...
&Avaa...
- &Save
&Tallenna
- Save &As...
Tallenna &nimellä...
- Exit QGIS
Poistu QGIS:tä
- Ctrl+Q
Ctrl+Q
- &Undo
&Kumoa
- Ctrl+Z
Ctrl+Z
- &Redo
&Tee uudelleen
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Leikkaa kohteet
- Ctrl+X
Ctrl+X
- Copy Features
Kopioi kohteet
- Ctrl+C
Ctrl+C
- Paste Features
Liitä kohteet
- Ctrl+V
Ctrl+V
- Add Feature
Lisää kohde
- Ctrl+.
Ctrl+.
- Move Feature(s)
Siirrä kohteet
- Reshape Features
Uudelleenmuotoile kohteet
- Split Features
Jaa kohde
- Split Parts
Halkaise osat
- Delete Selected
Poista valitut
- Add Ring
Lisää piiri
- Add Part
Lisää osa
- Simplify Feature
Pelkistä kohde
- Delete Ring
Poista piiri
- Delete Part
Poista osa
- Merge Selected Features
Yhdistä valitut kohteet
- Merge Attributes of Selected Features
Yhdistä ominaisuustiedot valituista kohteista
- Node Tool
Solmutyökalu
- Rotate Point Symbols
Kierrä pistesymboleita
- Snapping Options...
Kohdistusvaihtoehdot...
- Pan Map
Panoroi karttaa
- Zoom In
Lähennä
- Ctrl++
Ctrl++
- Zoom Out
Loitonna
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Valitse yksittäinen kohde
+ Valitse yksittäinen kohde
+ Select Features by Rectangle
- Valitse kohteet suorakaiteella
+ Valitse kohteet suorakaiteella
- Select Features by Polygon
Valitse kohteet monikulmiolla
- Select Features by Freehand
Valitse kohteet vapaalla kädellä
- Select Features by Radius
Valitse kohteet säteellä
- Deselect Features from All Layers
Poista kohteet kaikilta tasoilta
- Identify Features
Tunnista ominaisuudet
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Mittaa viiva
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Mittaa alue
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Mittaa kulma
- Zoom Full
Loitonna näyttöalueelle
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Kohdenna tasoon
- Zoom to Selection
Kohdenna valintaan
- Ctrl+J
Ctrl+J
- Zoom Last
Kohdenna edelliseen kohdennukseen
- Zoom Next
Kohdenna seuraavaan
- Zoom Actual Size
Kohdenna oikeaan kokoon
- Zoom to Native Pixel Resolution
Kohdenna alkuperäiseen pikseliresoluutioon
- Map Tips
Karttavinkit
- Show information about a feature when the mouse is hovered over it
Näyttää tieto kohteesta kun hiirenkursoria pidetään kohteen päällä
- New Bookmark...
Uusi kirjanmerkki...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Näytä kirjanmerkit
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Päivitä
- Text Annotation
Tekstihuomautus
- Form Annotation
Lomakkeen huomautukset
- Move Annotation
Siirrä huomautusta
- Labeling
Nimeäminen
- Layer Labeling Options
Tason nimiöiden vaihtoehdot
- New Shapefile Layer...
Uusi Shapefile taso...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Uusi SpatiaLite taso...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Rasterilaskin...
- Add Vector Layer...
Lisää vektoritaso...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Lisää rasteritaso...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Lisää PostGIS tasot...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Lisää SpatiaLite taso...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Lisää MSSQL Spatial taso...
- Add Oracle Spatial Layer...
Lisää Oracle Spatial Taso...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Lisää WMS/WMTS taso...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Avaa ominaisuustietojen taulu
- Toggle Editing
Vaihda muokkauksen toimintatilaa
- Toggles the editing state of the current layer
Mahdollistaa nykyisen tason muokkauksen
- Save for Selected Layer(s)
Tallenna valituille taso(i)lle
- Save edits to current layer, but continue editing
Tallenna muokkaukset nykyiseen tasoon jatkaen muokkausta
- Save As...
Tallenna...
- Add from Layer Definition File...
Lisää Tason Määritykset tiedostosta...
- Save As Layer Definition File...
Tallenna Tason Määritykset tiedostoon...
- Normal
Normaali
- Normal preview mode
Normaali esikatselu tila
- Simulate Photocopy (Grayscale)
Simuloi valokopiota (harmaasävy)
- Simulate photocopy (grayscale)
Simuloi valokopiota (harmaasävy)
- Simulate Fax (Mono)
Simuloi faxia (mono)
- Simulate fax (mono)
Simuloi faxia (mono)
- Simulate Color Blindness (Protanope)
Simuloi värisokeutta (protanopia eli punasokeus)
- Simulate color blindness (protanope)
Simuloi värisokeutta (protanopia eli punasokeus)
- Simulate Color Blindness (Deuteranope)
Simuloi värisokeutta (deuteranopia)
- Simulate color blindness (deuteranope)
Simuloi värisokeutta (deuteranopia)
- Set Scale Visibility of Layer(s)
Aseta mittakaavan näkyvyys tasolle/tasoille
- Remove Layer(s)
Poista taso(t)
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Aseta CRS tasoille
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Aseta projektin CRS tasosta
- Properties...
Ominaisuudet...
- Query...
Kysely...
- Add to Overview
Lisää katselmukseen
- Add All to Overview
Lisää kaikki katselmukseen
- Remove All from Overview
Poista kaikki katsauksesta
- Show All Layers
Näytä kaikki tasot
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Piilota kaikki tasot
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Hallitse ja asenna liitännäisiä...
- Open Field Calculator
Avaa Tiedon laskin
- Add Delimited Text Layer...
Lisää erotinmerkkejä sisältävä tekstitiedosto...
- Add Delimited Text Layer
Lisää erotinmerkkejä sisältävä tekstitiedosto
- New Vector Layer
Uusi vektoritaso
- Paste features in clipboard into a new OGR vector layer.
Liitä ominaisuudet leikepöydältä uuteen OGR vektoritasoon.
- New Memory Vector Layer
Uusi muistivektoritaso
- Paste features in clipboard into a new memory vector layer.
Liitä ominaisuudet leikepöydältä uuteen muistivektoritasoon.
- Toggle Full Screen Mode
Siirry kokonäytön tilaan
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Projektin asetukset...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Asetukset...
- Custom CRS...
Käyttäjän määrittelemä CRS...
- Configure shortcuts...
Muokkaa pikanäppäimiä...
- Local Histogram Stretch
Paikallinen histogrammin asetus
- Stretch histogram of active raster to view extents
Aseta aktiivisen rasyerin histogrammi nähdäksesi laajennukset
- Help Contents
Ohjeen sisältö
- F1
F1
- API documentation
API dokumentaatio
- QGIS Home Page
QGIS kotisivu
- Ctrl+H
Ctrl+H
- Check QGIS Version
Tarkista QGIS Version
- Check if your QGIS version is up to date (requires internet access)
Tarkistaa jos sinun QGIS sovellus on päivitetty (Vaatii internetyhteyden)
- About
Tietoja
- QGIS Sponsors
QGIS Sponsorit
- Move Label
Siirrä nimiö
- Rotate Label
Kierrä nimiötä
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Kierrä nimiötä
Ctl (Cmd) lisää 15 asteella.
- Change Label
Muuta nimiö
- Style Manager...
Tyylien hallinta...
- Python Console
Python konsoli
- Full histogram stretch
Täysi histogrammin jousto
- Stretch Histogram to Full Dataset
Laajenna histogrammi täyteen aineistoon
- Customization...
Räätälöinti...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Tämä on täällä vain pikakuvakkeen konfliktin välttämiseksi, pikakuvake pyydetty Qgis räätälöinnissä
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Liitä tasot ja ryhmät...
- Embed layers and groups from other project files
Upota kerrokset ja ryhmät muista projektitiedostoista
- &Copyright Label
&Tekijänoikeusnimiö
- Creates a copyright label that is displayed on the map canvas.
Luo tekijänoikeusnimiön, joka näkyy karttapohjassa.
- &North Arrow
&Pohjoisnuoli
- "Creates a north arrow that is displayed on the map canvas"
"Luo pohjoisnuolen joka näytetään kartan näyttöalueella"
- &Scale Bar
&Mittakaavajana
- Creates a scale bar that is displayed on the map canvas
Luo mittakaavajanan joka näytetään kartan näyttöalueella
- Add WFS Layer...
Lisää WFS taso...
- Add WFS Layer
Lisää WFS taso
- Feature Action
Toiminnat kohteille
- Run Feature Action
Suorita toiminnat kohteille
- Pan Map to Selection
Panoroi kartta valintaan
- Touch zoom and pan
Kosketus zoomaus ja panorointi
- Offset Curve
Siirtymäkäyrä
- Copy style
Kopioi tyyli
- Paste style
Liimaa tyyli
- Add WCS Layer...
Lisää WCS taso...
- &Grid
&Ruudukko
- Grid
Ruudukko
- Pin/Unpin Labels
Kiinnitä/poista kiinnitys nimiöiltä
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6668,44 +6635,44 @@ Shift poistaa kiinnityksen, Ctl (Cmd) vaihtaa tilaa
Toimii kaikilla muokattavilla tasoilla
- Highlight Pinned Labels
Korosta kiinnitetyt nimiöt
- New Blank Project
Uusi tyhjä projekti
- Local Cumulative Cut Stretch
Paikallinen kumulatiivinen leikkauksen jousto
- Local cumulative cut stretch using current extent, default limits and estimated values.
Paikallinen kumulatiivinen leikkauksen jousto käyttäen nykyistä laajuutta, oletus rajoja ja oletettuja arvoja.
- Full Dataset Cumulative Cut Stretch
Täyden tietojoukon kumulatiivinen leikkauksen jousto
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Kumulatiivinen leikkauksen jousto käyttäen täyttä tietojoukon laajuutta, oletus rajoja sekä arvioituja arvoja.
- Show/Hide Labels
Näytä/Kätke nimiöt
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6716,128 +6683,128 @@ Shift+klikkaus tai vieritys nimiölle jonka haluat kätkeä
Toimii nyt aktiivisesti muokattavalle tasolle
- Html Annotation
Html Huomautus
- Duplicate Layer(s)
Monista taso(t)
- SVG annotation
SVG Huomautus
- Save for All Layers
Tallenna kaikille tasoille
- Rollback for All Layers
Palauta kaikilla tasoilla
- Cancel for All Layers
Peruuta kaikilla tasoilla
- Rollback for Selected Layer(s)
Palauta valitu(i)lla taso(i)lla
- Current Edits
Nykyiset muokkaukset
- Cancel for Selected Layer(s)
Peruuta valituilla taso(i)lla
- Save Layer Edits
Tallenna tason muokkaukset
- Rotate Feature(s)
Kierrä ominaisuutta/ominaisuuksia
- &Download data
&Lataa dataa
- &Import topology from XML
&Tuo topologia XML:stä
- &Export topology to SpatiaLite
&Vie topologia SpatiaLiteen
- Increase brightness
Lisää kirkkautta
- Decrease brightness
Vähennä kirkkautta
- Increase contrast
Lisää kontrastia
- Decrease contrast
Vähennä kontrastia
- Select By Expression
Valitse lausekkeella
- Select features using an expression
Valitse ominaisuudet käyttämällä lauseketta
- Need commercial support?
Tarvitsetko kaupallista apua?
- DXF Export...
DFX vienti ...
- Fill Ring
Täyttökehä
@@ -7283,11 +7250,6 @@ Toimii nyt aktiivisesti muokattavalle tasolle
Can't save model
Ei voida tallentaa mallia
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
Malli ei sisällä yhtään algoritmia tai parametreja eikä sitä voi suorittaa
@@ -7315,7 +7277,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- Valittua mallia ei voitu ladata.
+ Valittua mallia ei voitu ladata.
Virheellinen rivi: %s
@@ -8168,22 +8130,22 @@ Virheellinen rivi: %s
Arvioidaan normaalin derivaattoja...
- minidump written to %1
pienoisdumppi kirjoitettiin %1:teen
- writing of minidump to %1 failed (%2)
pienoisdumpin kirjoittaminen %1:teen epäonnistui (%2)
- creation of minidump to %1 failed (%2)
pienoisdumpin luominen %1:teen epäonnistui (%2)
- Crash dumped
Ohjelman epäonnistuminen dumppiin
@@ -8335,6 +8297,7 @@ Virhe(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
CRS luotiin automaattisesti tason tiedoista sai tämän prefiksin kuvaukseen
@@ -8499,85 +8462,85 @@ Virhe(%2): %3
Ei voida muuntaa %1 Interval muotoon
- Cannot convert '%1' to boolean
Ei voida muuntaa %1 => boolean
- Domain max must be greater than domain min
Alan max tulee olla suurempi kuin alan min
- Exponent must be greater than 0
Eksponentin tulee olla suurempi kuin 0
- Invalid regular expression '%1': %2
Virheellinen säännöllinen lauseke '%1': %2
- Index is out of range
Indeksi rajojen ulkopuolella
- Cannot convert '%1:%2:%3' to color
ei voida muuntaa '%1:%2:%3' väriksi
- Cannot convert '%1:%2:%3:%4' to color
Ei voida muuntaa '%1:%2:%3:%4' väriksi
- "%1" is not a valid color ramp
"%1" ei ole kelvollinen väritys
- Cannot convert '%1:%2:%3:%4:%5' to color
Ei voida muuntaa '%1:%2:%3:%4:%5' väriksi
- function help for %1 missing
funktion ohje %1:lle kadoksissa
- Operators
Operaattorit
- Fields and Values
Tiedot ja arvot
- Math
Math
- Conversions
Muunnokset
- Conditionals
Ehdolliset
@@ -8624,58 +8587,58 @@ Virhe(%2): %3
vuosi|vuodet
- Date and Time
Päivä ja Aika
- String
String
- Color
Väri
- Geometry
Geometria
- Record
Tieto
- No root node! Parsing failed?
Ei perus solmua! Jäsennys epäonnistui?
- (no root)
(no root)
- Unary minus only for numeric values.
Looginen negaatio vain numeerisille arvoille.
- Can't preform /, *, or % on DateTime and Interval
Ei voida muotoilla /, *, tai % DateTime ja Interval tyypeillä
- [unsupported type;%1; value:%2]
[tukematon tyyppi%1; arvo:%2]
- Column '%1' not found
Saraketta '%1' ei löydy
@@ -8763,10 +8726,7 @@ Virhe(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- viiva %1 sisältää %n duplikaattia solmussa kohdassa %2
- viiva %1 sisältää %n duplikaattia solmuissa kohdassa %2
-
+ viiva %1 sisältää %n duplikaattia solmussa kohdassa %2 viiva %1 sisältää %n duplikaattia solmuissa kohdassa %2
Version 0.1
@@ -9887,6 +9848,7 @@ Only %1 of %2 features written.
Layers
Tasot
@@ -10464,12 +10426,14 @@ Only %1 of %2 features written.
Työkalu Shapefilen vientiin PostgreSQL/PostGIS
+ SQL Anywhere plugin
- SQL Anywhere plugin
+ SQL Anywhere plugin
+ Store vector layers within a SQL Anywhere database
- Tallenna vektoritasot SQL Anywhere tietokantaan
+ Tallenna vektoritasot SQL Anywhere tietokantaan
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS ei löytänyt GRASS asennusta.
Haluatko määritellä polun (GISBASE) GRASS asennukseesi?
@@ -10910,7 +10874,7 @@ Haluatko määritellä polun (GISBASE) GRASS asennukseesi?
Ei voitu luoda tiedostoa %1.qpj
- Fetching features failed.
SQL:%1
Error: %2
@@ -10919,7 +10883,7 @@ SQL:%1
Virhe: %2
- Oracle
Oracle
@@ -11381,12 +11345,14 @@ SQL: %1
moniosaisuus ominaisuus
+ Error describing bind parameters
- Virhe kuvattaessa sidosparametreja
+ Virhe kuvattaessa sidosparametreja
+ Error binding parameters
- Virhe sidosparametreissa
+ Virhe sidosparametreissa
Read-only field that generates a UUID if empty.
Ainoastaan-luettava tieto joka generoi UUID jos tyhjä.
-
- Legend
-
QSpatiaLiteDriver
- Error opening database
Virhe avattaessa tietokantaa
- Error closing database
Virhe suljettaessa tietokantaa
- Unable to begin transaction
Ei voida aloittaa tapahtumaa
- Unable to commit transaction
Ei voida vahvistaa tapahtumaa
- Unable to rollback transaction
Ei voida palauttaa tapahtumia
@@ -11591,27 +11552,27 @@ Vastaus oli:
Ei kyselyä
- Unable to execute statement
Ei kyetä suorittaa lauseketta
- Unable to execute multiple statements at a time
Usean komentojonon suorittaminen ei onnistu nykyisin
- Unable to reset statement
Komentojonon alkuun saattaminen ei onnistu
- Unable to bind parameters
Parametrien sitominen ei onnnistu
- Parameter count mismatch
Parametrien lukumäärissä virhe
@@ -11788,61 +11749,61 @@ Vastaus oli:
QGIS Valmis!
- Minimize
Pienennä
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Pienentää aktiivisen ikkunan telakkaikkunaksi
- Zoom
Zoom
- Toggles between a predefined size and the window size set by the user
Vaihtaa esimääritellyn koon ja käyttäjän määrittelemän koon välillä
- Bring All to Front
Tuo kaikki eteen
- Bring forward all open windows
Tuo kaikki ikkunat eteen
- Current Edits
Nykyiset muokkaukset
- Error
Virhe
- Failed to open Python console:
Python konsolin aukaisu epäonnistui:
@@ -11865,138 +11826,138 @@ Ota yhteyttä kehittäjiin.
QGIS - %1 ('%2')
- Panels
Paneelit
- Toolbars
Työkalut
- Window
Ikkuna
- &Database
&Tietokanta
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
Edistymispalkki joka näyttää hahmottamisen ja muiden aikaa vievien operaatioiden tilan
- Toggle extents and mouse position display
Ota käyttöön rajat ja hiirensijaintinäyttö
- Coordinate:
Koordinaatti:
- Current map coordinate
Nykyinen karttakoordinaatti
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Näyttää kartan koordinaatit nykyisestä kursorin sijainnista. Näyttö päivitetään jatkuvasti hiiren liikkuessa. Se sallii myös muokkauksella asettaa kartan näyttöalueen keskipisteen annettavaan sijaintiin. Muoto on leveyspiiri, pituuspiiri tai itä,pohjoinen
- Current map coordinate (lat,lon or east,north)
Nykyinen kartan koordinaatti (leveyspiiri, pituuspiiri tai itä,pohjoinen)
- Scale
Mittakaava
- Current map scale
Nykyisen kartan mittakaava
- Displays the current map scale
Näyttää nykyisen kartan mittakaavan
- Current map scale (formatted as x:y)
Nykyisen kartan mittakaava (muoto x,y)
- Render
Hahmota
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Kun valittuna, kartan tasot hahmotetaan kun kartalla navigoidaan tai siihen vaikuttaa tapahtumat. Kun tämä on valitsematta hahmottamista ei tehdä, ja sinun on mahdollista lisätä suuri määrä tasoja ja symboleita ennen hahmottamista.
- Toggle map rendering
Ota käyttöön kartan hahmottaminen
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Tämä kuvake näyttää onko reaaliaikainen paikkatietojärjestelmien muunnos käytössä vai ei. Klikkaa kuvaketta nähdäksesi asetus dialogin ja muuttaaksesi tämän toimintaa.
- CRS status - Click to open coordinate reference system dialog
CRS tila - Klikkaa päästäksesi asetuksiin
- Ready
Valmis
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Katselmus ikkuna. Tällä pohjalla voidaan näyttää karttapohjan nykyiset rajat. Raja näkyy punaisena suorakulmiona. Mikävain taso voidaan lisätä katselmukseen.
- Overview
Katselmus
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Karttaselite joka näyttää kaikki karttapohjalla olevat tasot. Klikkaa valintaruutua piilottaaksesi tason. Tuplaklikkaa tasoa selitteessä kustomoidaksesi sitä.
- Layers
Tasot
- Map layer list that displays all layers in drawing order.
Kartan tasojen listaus joka näyttää kaikkien tasojen piirtämisjärjestyksen.
- Layer order
Tasojärjestys
@@ -12006,394 +11967,388 @@ Ota yhteyttä kehittäjiin.
Yksityinen qgis.db
- < Blank >
< Tyhjä >
- QGIS version
QGIS versio
- QGIS code revision
Qgis koodin tarkistus
- Compiled against Qt
Käännetty Qt mukana
- Running against Qt
Suoritetaan QT:n kanssa
- Compiled against GDAL/OGR
Käännetty mukana GDAL/OGR
- Running against GDAL/OGR
Suoritetaan mukana GDAL/OGR
- PostgreSQL Client Version
PostgreSQL Client Versio
- No support.
Ei tuettu.
- SpatiaLite Version
SpatiaLite Versio
- QWT Version
QWT Versio
- PROJ.4 Version
PROJ.4 Versio
- QScintilla2 Version
QScintilla2 Versio
- This copy of QGIS writes debugging output.
Tämä QGIS versio kirjoittaa vianetsintätietoja.
- %1 doesn't have any layers
%1 ei ole yhtään tasoa
- Invalid Data Source
Viallinen tietolähde
- %1 is not a valid or recognized data source
%1 ei ole oikea tai tunnistettu tiedonlähde
- Vector
Vektori
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Ei saada PostgreSQL valinta ikkunaa palveluntarjoajalta.
- %1 is an invalid layer - not loaded
%1 on virheellinen taso - ei ladattu
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 on virheellinen taso eikä sitä voida ladata. Ole ystävällinen ja tarkista <a href="#messageLog">virhe loki</a> lisäinformaation saamiseksi.
- QGIS files
QGIS tiedostot
- No legend entries selected
Selitteitä ei ole valittu
- Select the layers and groups you want to remove in the legend.
Valitse tasot ja ryhmät jotka haluat poistaa selitteestä.
- Remove layers and groups
Poista tasot ja ryhmät
- Remove %n legend entries?
number of legend items to remove
-
- Poista %n seliteosaa?
- Poista %n selitteen osaa?
-
+ Poista %n seliteosaa? Poista %n selitteen osaa?
- %n legend entries removed.
number of removed legend entries
-
- %n seliteosa poistettu.
- %n seliteteen osaa poistettu.
-
+ %n seliteosa poistettu. %n seliteteen osaa poistettu.
- %1 (%2 type unsupported)
%1 (%2 tyyppiä ei tueta)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/en/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Haluatko tallentaa nykyisen projektin? %1
- Invalid Layer
Viallinen taso
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Ei saada SpatiaLite valinta ikkunaa palveluntarjoajalta.
- Delimited Text
Eroteltu teksti
- Cannot get Delimited Text select dialog from provider.
Ei saada Erotellun Tekstin valinta ikkunaa palveluntarjoajalta.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Ei saada MSSQL valintadialogia palveluntarjoajalta.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Ei saada Oracle valintadialogia tajoajalta.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Ei saada WMS valinta ikkunaa palveluntarjoajalta.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Ei saada WCS valintadialogia tajoajalta.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Ei saada WFS valintadialogia tajoajalta.
- Default failed to open: %1
Oletus epäonnistui avauksessa: %1
- Default not found: %1
Oletusta ei löydy: %1
- Open Template Project
Avaa Malli Projekti
- Auto-open Project
Automaattinen Projektin avaus
- Failed to open: %1
Avaus epäonnistui: %1
- Not valid project file: %1
Virheellinen projektitiedosto: %1
- Project failed to open: %1
Projektitiedoston avaus epäonnistui: %1
- Default template has been reopened: %1
Oletusmalli on avattu uudelleen: %1
- File not found: %1
Tiedostoa ei löydy: %1
- Calculating...
Lasketaan...
- Abort...
Keskeytä...
- Choose a QGIS project file to open
Valitse QGIS projekti tiedosto jonka haluat avata
- Loading project: %1
Ladataan projektia: %1
- Unable to open project
Projektia ei voida avata
- Security warning
Turvallisuus varoitus
- project macros have been disabled.
Projektin makrot on poistettu käytöstä.
- Enable macros
Ota makrot käyttöön
- Project loaded
Projekti ladattu
- Choose a QGIS project file
Valitse QGIS projekti tiedosto
- Saved project to: %1
Projekti tallennettiin nimellä %1
- Unable to save project %1
Projektia %1 ei voida tallentaa
- Choose a file name to save the QGIS project file as
Valitse tallennettavan QGIS projektitiedoston nimi
- Unable to load %1
Ei voida ladata %1
- Choose a file name to save the map image as
Valitse tallennettavan karttakuvan nimi
- Saved map image to %1
Karttakuva tallennettiin nimellä %1
- Default system font substituted.
Järjestelmän oletus kirjasinlaji korvattu.
- Labeling
Nimiöinti
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
Kirjasinlajia tasolle <b><u>%1</u></b> ei löytynyt (<i>%2</i>). %3
- Open labeling dialog
Avaa nimiöinti ikkuna
@@ -12494,452 +12449,446 @@ Ota yhteyttä kehittäjiin.
Päivä/Aika
- Compiled against GEOS
Käännetty käyttäen GEOS
- Running against GEOS
Suoritetaan käyttäen GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
Tason luonti epäonnistui. Ole ystävällinen ja tarkista <a href="#messageLog">viestiloki </a> lisäinformaation saamiseksi.
- Insufficient permissions
Riittämättömät käyttöoikeudet
- The project file is not writable.
Projektitiedosto ei ole kirjoitettavissa.
- DXF export completed
DXF vienti suoritettu
- DXF export failed
DXF vienti epäonnistui
- Commit errors
Vahvistus (commit) virheet
- Could not commit changes to layer %1
Ei voitu vahvistaa muutoksia tasolle %1
- Errors: %1
Virheet: %1
- Show more
Näytä lisää
- Labeling Options
Nimiöinnin vaihtoehdot
- Please select a vector layer first
Ole hyvä ja valitse vektoritaso ensin
- Layer labeling settings
Tason nimiöiden asetukset
- Reading raster
Luetaan rasteria
- Cannot write raster error code: %1
Ei voida kirjoittaa rasterin virhe koodia: %1
- Saving done
Tallennus valmis
- Export to vector file has been completed
Vienti vektoritiedostoon suoritettu
- Save error
Tallennus virhe
- Export to vector file failed.
Error: %1
Vienti vektoritiedostoon epäonnistui.
Virhe: %1
- No Layer Selected
Tasoa ei valittuna
- To delete features, you must select a vector layer in the legend
Poistaaksesi kohteet, sinun täytyy valita vektoritaso selitteestä
- No Vector Layer Selected
Ei vektoritasoa valittuna
- Deleting features only works on vector layers
Kohteiden poisto onnistuu vain vektoritasoilla
- Provider does not support deletion
Tarjoaja ei tue poistamista
- Data provider does not support deleting features
Tiedontarjoaja ei tue kohteiden poistamista
- Layer not editable
Taso ei ole muokattavissa
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Nykyinen taso ei ole muokattavissa. Valitse 'aloita muokkaus' digitointi työkalussa.
- No Features Selected
Ominaisuuksia ei valittu
- The current layer has not selected features
Nykyiseltä tasolta ei ole valittu ominaisuuksia
- Delete features
Poista kohteet
- Delete %n feature(s)?
number of features to delete
-
- Poista kohde?
- Poista %n kohdetta?
-
+ Poista kohde? Poista %n kohdetta?
- Features deleted
Kohteet poistettu
- Problem deleting features
Ongelma kohteita poistettaessa
- A problem occured during deletion of features
Virhe kohteita poistettaessa
- %n feature(s) deleted.
number of features deleted
-
- %n ominaisuus poistettu.
- %n ominaisuutta poistettu.
-
+ %n ominaisuus poistettu. %n ominaisuutta poistettu.
- Merging features...
Yhdistetään kohteita...
- Abort
Keskeytä
- Create unique print composer title
Luo yksilöllinen tulosteen muodostajan otsikko
- (title generated if left empty)
(generoitava otsikko jos jätetään tyhjäksi)
- Composer title
Muodostajan otsikko
- Title can not be empty!
Otsikko ei voi olla tyhjä!
- Title already exists!
Otsikko on jo olemassa!
- Composer %1
Muodostaja %1
- copy
kopioi
- No active layer
Ei aktiivista tasoa
- No active layer found. Please select a layer in the layer list
Aktiivista tasoa ei löydy. Valitse taso tasolistasta
- Active layer is not vector
Aktiivinen taso ei ole vektoritaso
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Kohteiden yhdistämien toimii vain vektoritasoilla. Valitse vektoritaso tasolistasta
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Kohteiden yhdistäminen toimii vain tasoilla joilla muokkaus on sallittu. Mene valikkoon Taso->Salli muokkaus
- Not enough features selected
Kohteita ei ole valittu riittävästi
- The merge tool requires at least two selected features
Yhdistämistyökalu vaatii vähintään kaksi valittua kohdetta
- Merged feature attributes
Yhdistettiin kohteiden ominaisuustietoja
- Merge failed
Yhdistäminen epäonnistui
- An error occured during the merge operation
Virhe yhdistettäessä
- Union operation canceled
Yhdistävä operaatio peruutettiin
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
Liitto-operaatio johtaisi geometriaan jota nykyinen taso ei tue. Operaatio peruttiin
- Merged features
Kohteet yhdistettiin
- No active vector layer
Ei aktiivista vektoritasoa
- To select features, choose a vector layer in the legend
Valitaksesi ominaisuuksia, valitse vektoritaso selitteessä
- Features cut
Kohteet leikattiin
- Features pasted
Kohteet liitettiin
- Paste features
Liitä ominaisuudet
- no features could be successfully pasted.
ominaisuuksia ei kyetty liittämään onnistuneesti.
- %1 features were successfully pasted.
%1 ominaisuutta liitettiin onnistuneesti.
- %1 of %2 features could be successfully pasted.
%1 ominaisuutta kaikkiaan %2 liitettiin onnistuneesti.
- Pasted
Liitetty
- New memory layer name
Uuden muistitason nimi
- Layer name
Tason nimi
- No features in clipboard.
Leikepöydällä ei ominaisuuksia.
- No features with geometry found, point type layer will be created.
Ei löydetty ominaisuuksia geometrialla, pistetyypin taso luodaan.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Useita geometriatyyppejä löydetty, ominaisuudet joiden geometria erilainen kuin %1 luodaan ilman geometriaa.
- Cannot create new layer
Uutta tasoa ei voida luoda
- Cannot create field %1 (%2,%3)
Ei voida luoda tietoa %1 (%2,%3)
- Cannot copy style: %1
Ei voida kopioida tyyliä: %1
- Cannot parse style: %1:%2:%3
Ei voida jäsentää tyyliä: %1:%2:%3
- Cannot read style: %1
Ei voida lukea tyyliä: %1
- Start editing failed
Muokkaamisen aloittaminen epäonnistui
- Provider cannot be opened for editing
Tarjoajaa ei voi muokata
- Stop editing
Lopeta muokkaus
- Do you want to save the changes to layer %1?
Haluatko tallentaa muutokset tasolle %1?
- Problems during roll back
Ongelmia palautuksessa
- Could not %1 changes to layer %2
Errors: %3
@@ -12949,343 +12898,340 @@ Errors: %3
Virheet: %3
- rollback
palautus
- cancel
peruuta
- Save
Tallenna
- all
kaikki
- Rollback
Palautus
- Cancel
Peruuta
- Current edits
Nykyiset muokkaukset
- %1 current changes for %2 layer(s)?
%1 nykyisiä muutoksia %2 tasolle(tasoille)?
- copy
kopioi
- Plugin layer
Liitännäistaso
- Memory layer
Muistitaso
- Duplicate layer:
Duplikaattitaso:
- %1 (duplication resulted in invalid layer)
%1 (tuplaaminen johti virheelliseen tasoon)
- Set scale visibility for selected layers
Aseta mittakaavan näkyvyys valituille tasoille
- Couldn't load Python support library: %1
Ei voida ladata Python tukikirjastoa: %1
- Couldn't resolve python support library's instance() symbol.
Ei voida ratkaista Python tukikirjaston instance() symbolia.
- Python support ENABLED :-)
Python tuki MAHDOLLISTETTU. :-)
- There is a new version of QGIS available
Uusi versio QGIS:stä löytyi
- You are running a development version of QGIS
Tämä on QGIS kehitysversio
- You are running the current version of QGIS
Tämä on uusin versio
- Would you like more information?
Haluaisitko lisätietoa?
- QGIS Version Information
QGIS Version tietoja
- QGIS - Changes since last release
QGIS - Muutokset edellisestä julkaisusta
- Unable to get current version information from server
Versiotietoa ei saada haettua palvelimelta
- Connection refused - server may be down
Yhteys epäonnistui - palvelin voi olla alhaalla
- QGIS server was not found
QGIS palvelinta ei löydy
- Unknown network socket error: %1
Tuntematon verkon socket error: %1
- Unable to communicate with QGIS Version server
%1
QGIS versio palvelimen kanssa kommunikointi epäonnistui
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
Suorittaaksesi täyden histogrammin laajentamisen, Sinulla tulee olla rasteritaso valittuna.
- To change brightness or contrast, you need to have a raster layer selected.
Muuttaaksesi kirkkautta tai kontrastia, Sinulla tulee olla rasteritaso valittuna.
- en
documentation language
en
- Layer is not valid
Taso virheellinen
- The layer %1 is not a valid layer and can not be added to the map
Taso %1 ei ole hyväksyttävä taso eikä sitä voida lisätä kartalle
- The layer is not a valid layer and can not be added to the map
Tämä taso on virheellinen eikä sitä voida lisätä kartalle
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Projektissa on tasoja muokkaustilassa joiden muokkauksia ei ole tallennettu, joita EI tulla tallentamaan!
- Save?
Tallenna?
- Current CRS: %1 (OTFR enabled)
Nykyinen CRS: %1 (OTFR käytössä)
- Current CRS: %1 (OTFR disabled)
Nykyinen CRS: %1 (OTFR ei käytössä)
- Map coordinates for the current view extents
Koordinaatit nykyisen katselmuksen rajoille
- Map coordinates at mouse cursor position
Koordinaatit kursorin kohdalla
- Extents:
Rajat:
- Maptips require an active layer
Vinkit tarvitsevat aktiivisen tason
- %n feature(s) selected on layer %1.
number of selected features
-
- %n kohde valittu tasolla %1.
- %n kohteita valittu tasolla %1.
-
+ %n kohde valittu tasolla %1. %n kohteita valittu tasolla %1.
- Open a GDAL Supported Raster Data Source
Avaa GDAL tuettu rasteri tietolähde
- Error adding valid layer to map canvas
Virhe lisättäessä kelvollinen taso kartan näyttöalalle
- Raster layer
Rasteritaso
- %1 is not a supported raster data source
%1 rasteri tietuetta ei tueta
- Unsupported Data Source
Tukematon tietue
- Exit QGIS
Poistu QGIS:tä
- Do you really want to quit QGIS?
Haluatko todella poistua QGIS ohjelmasta?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Tämä projektitiedosto on tallennettu vanhemmalla QGIS versiolla. Kun talletat tämän projektitiedoston QGIS päivittää sen viimeisimpään versioon, mahdollisesti tehden sen käyttökelvottomaksi vanhemmille QGIS versioille.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Tämä projektitiedosto on tallennettu QGIS:n vanhemmalla versiolla. Kun tämä projekti tallennetaan QGIS päivittää sen uusimmalle versiolle, ja on mahdollista että sitä ei voi enään avata QGIS:n vanhemmilla versioilla. <p> QGIS kehittäjät pyrkivät säilyttämään taaksepäinyhteensopivuuden, mutta osa vanhan projektin tiedoista voi kadota. Parantaaksemme QGIS ohjelmiston laatua, olisimme kiitollisia jos raportoit kaikista bugeista mitä löydät. Bugit voit ilmoittaa kohteeseen %3. Muista myös liittää mukaan vanha projektitiedosto, sekä ilmoittaa mitä QGIS versiota käytit virheen löytämiseen.<p> Poistaaksesi tämän varoituksen vanhoja projekteja aukaistessa, ota ruksi pois valintaruudusta '%5' valikossa %4.<p> Projektitiedoston versionumero: %1 <br> Nykyisen QGIS installaation versio: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Muokkaa:Asetukset:Yleiset</tt>
- Warn me when opening a project file saved with an older version of QGIS
Varoita minua kun avaan projektin joka on tallennettu vanhemmalla QGIS versiolla
- Project file is older
Projektitiedosto on vanhempi
- This project file was saved by an older version of QGIS
Tämä projektitiedosto tallennettiin vanhemmalla QGIS versiolla
- Please check the <a href="#messageLog">message log</a> for further info.
Ole ystävällinen ja tarkista <a href="#messageLog">viestiloki </a> lisäinformaation saamiseksi.
- A network request timed out, any data received is likely incomplete.
Verkkopyyntö on vanhentunut. Vastaanotettu data on todennäköisesti epätäydellistä.
- Warning
Varoitus
- This layer doesn't have a properties dialog.
Tällä tasolla ei ole asetus dialogia.
- Authentication required
Todennusta tarvitaan
- Proxy authentication required
Proxy todennusta tarvitaan
- SSL errors occured accessing URL %1:
SSL virheitä tapahtui käytettäessä URL %1:
-
Always ignore these errors?
@@ -13294,13 +13240,10 @@ Always ignore these errors?
Ohita nämä virheet aina?
- %n SSL errors occured
number of errors
-
- %n SSL virhe tapahtui
- %n SSL virheitä tapahtui
-
+ %n SSL virhe tapahtui %n SSL virheitä tapahtui
@@ -13332,7 +13275,7 @@ Ohita nämä virheet aina?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13682,19 +13625,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
Poikkeus
- unknown exception
tuntematon keskeytys
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13719,7 +13662,7 @@ Käyttäjän DB Polku: %9
-
match indentation of application state
@@ -13727,24 +13670,24 @@ Käyttäjän DB Polku: %9
- [ERROR] Can not make qgis.db private copy
[VIRHE] Ei voida tehdä qgis.db tiedostosta yksityistä kopiota
- Could not open qgis.db
Ei voitu avata qgis.db
- Migration of private qgis.db failed.
%1
Yksityisen qgis.db siirto epäonnistui.
%1
- Update of view in private qgis.db failed.
%1
Näytön päivitys yksityisessä qgis.db epäonnistui.
@@ -13754,28 +13697,28 @@ Käyttäjän DB Polku: %9
QgsAtlasComposition
- Atlas filter eval error: %1
Atlassuodattimen evaluontivirhe: %1
- Composer
Laatija
- No matching atlas features
Ei vastaavia atlas ominaisuuksia
- Atlas feature %1 of %2
Atlas ominaisuus %1 kaikkiaan %2
- Atlas filename evaluation error: %1
Atlaksen tiedostonimen evaluontivirhe: %1
@@ -13791,7 +13734,7 @@ Käyttäjän DB Polku: %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Ei voitu asettaa tiedostonimen mallia kuten '%1'.
@@ -14486,10 +14429,7 @@ Jäsentelyvirhe:
Attribute table - %1 (%n Feature(s))
feature count
-
- Ominaisuustietotaulu - %1 (%n Kohde)
- Ominaisuustietotaulu - %1 (%n Kohdetta)
-
+ Ominaisuustietotaulu - %1 (%n Kohde) Ominaisuustietotaulu - %1 (%n Kohdetta)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Haluatko varmasti poistaa %n kirjanmerkin ?
- Haluatko varmasti poistaa %n kirjanmerkkiä ?
-
+ Haluatko varmasti poistaa %n kirjanmerkin ? Haluatko varmasti poistaa %n kirjanmerkkiä ?
QgsCategorizedSymbolRendererV2Model
- Symbol
Symboli
- Value
Arvo
- Label
Nimiö
@@ -15272,49 +15209,49 @@ Tietokanta: %2
Vaativammat
- Random colors
Satunnaisvärit
- Symbol levels...
Symbolin tasot...
- High number of classes!
Suuri määrä luokkia!
- Classification would yield %1 entries which might not be expected. Continue?
Luokittelu antaisi %1 luokkia, joka ei ehkä ole odotettua. Jatkatko?
- Error
Virhe
- There are no available color ramps. You can add them in Style Manager.
Liukvärejä ei ole määritelty. Voit määritellä ne tyylien hallinnassa.
- The selected color ramp is not available.
Valittu liukuväri ei ole käytettävissä.
- Confirm Delete
Vahvista poisto
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Luokitus kenttä muuttui, ennen: %1, uusi: %2
Pitäisikö olemassa olevat luokat poistaa ennen luokitusta?
@@ -15372,25 +15309,20 @@ Pitäisikö olemassa olevat luokat poistaa ennen luokitusta?
QgsColorButton
- Select Color
Valitse väri
- Copy color
Kopioi väri
- Paste color
Liitä väri
-
- Pick color
-
QgsColorDialog
@@ -15462,7 +15394,7 @@ Pitäisikö olemassa olevat luokat poistaa ennen luokitusta?
Composer
Mallin muodostus
@@ -15621,8 +15553,8 @@ Pitäisikö olemassa olevat luokat poistaa ennen luokitusta?
Set as atlas feature for %1
Aseta atlas ominaisuuden arvoksi %1
@@ -15659,7 +15591,7 @@ Pitäisikö olemassa olevat luokat poistaa ennen luokitusta?
Choose a file name to save the map as
Valitse tiedoston nimi jonne kartta tallennetaan nimellä
@@ -15670,15 +15602,15 @@ Pitäisikö olemassa olevat luokat poistaa ennen luokitusta?
Empty filename pattern
Tyhjä tiedostopääte
The filename pattern is empty. A default one will be used.
Tyhjä tiedostopääte. Käytetään oletusta.
@@ -15689,15 +15621,15 @@ Pitäisikö olemassa olevat luokat poistaa ennen luokitusta?
Unable to write into the directory
Hakemistoon ei voida kirjoittaa
The given output directory is not writable. Cancelling.
Annettu tulostehakemisto on kirjoitussuojattu. Peruutetaan.
@@ -15707,251 +15639,251 @@ Pitäisikö olemassa olevat luokat poistaa ennen luokitusta?
Atlas processing error
Atlaksen prosessointi virhe
Feature filter parser error: %1
Ominaisuussuotimen jäsentelyvirhe: %1
Error creating %1.
Virhe luotaessa %1.
Rendering maps...
Hahmotetaan karttoja...
Abort
Keskeytä
- Big image
Iso kuva
- To create image %1x%2 requires about %3 MB of memory. Proceed?
Kuvan luominen %1x%2 tarvitsee noin %3 MB muistia. Jatkatko?
- Choose a file name to save the map image as
Valitse tallennettavan karttakuvan nimi
- Memory Allocation Error
Muistin allokoinnissa virhe
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
Yritys luoda kuva #%1 ( %2x%3 @ %4dpi ) saattaaa johtaa muistin ylivuotoon.
Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paperin koolla
- Image export error
Kuvan viennissä virhe
- Directory where to save image files
Hakemisto jonne kuvatiedostot tallennetaan
- Image format:
Kuvan formaatti:
- SVG warning
SVG varoitus
- Don't show this message again
Älä näytä tätä viestiä uudestaan
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>SVG vienti funktiossa QGIS ohjelmassa on useita ongelmia johtuen virheistä ja puutteista
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4 svg koodissa. Erityisesti ongelmia on tasoissa joita eivät leikkaa kartan rajauslaatikkoa.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Jos tarvitse vektoripohjaisen tulostustiedoston QGISsistä on suositeltavaa että yrität tulostaa PostScriptin jos SVG tuloste ei ole tyydyttävä.</p>
- SVG Format
SVG Formaatti
- Directory where to save SVG files
Hakemisto minne SVG tiedostot tallennetaan
- SVG export error
SVG viennissä virhe
- on page
sivulla
- SVG error
SVG virhe
- There was an error in SVG output for SVG layer
SVG tulosteessa löytyi virhe SVG tasolle
- copy
kopioi
- Duplicating composer...
Tuplataan muodostaja...
- Duplicate Composer
Tuplaa muodostaja
- Composer duplication failed.
Muodostajan tuplaus epäonnistui.
- Save template
Tallenna malli
- Composer templates
Sommittelumallit
- Save error
Tallennusvirhe
- Error, could not save file
Virhe, ei voitu tallentaa tiedostoa
- Load template
Lataa malli
- Read error
Lukuvirhe
- Error, could not read file
Virhe, ei voitu lukue tiedostoa
- Composer error
Muodostus virhe
- Error, could not create new composer
Virhe, ei voitu luoda uutta muodostajaa
- Loading template into composer...
Ladataan mallia muodostajaan...
- Project contains WMS layers
Projekti sisältää WMS tasoja
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Joissakin WMS palvelimissa (kuten UMN karttapalvelimessa) on rajoituksia LEVEYS ja KORKEUS parametreille. Tulostettaessa tasoja näistä palvelimista voivat ylittää nämä rajat. Jos näin, WMS tasoa ei tulosteta
- Project contains composition effects
Projekti sisältää sommittelun vaikutukset
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Laajennetut sommittelu efektit kuten sekoitusmoodi tai vektoritason läpinäkvyys ovat mahdollistettu tässä projektissa ja joita ei voida tulostaa vektoreina. Tulostusta raterina suositellaan.
- Print as raster
Tulosta rasterina
- Landscape
Vaakasuora
@@ -17096,67 +17028,67 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
QgsComposerItemWidget
- Frame color changed
Reunuksen väri muutettu
- Background color changed
Taustaväri muutettu
- Item position changed
Kohteen sijaintia muutettu
- Item outline width
Kohteen ulkoreunan leveys
- Item frame join style
Kohteen kehysten liitynnän tyyli
- Item frame toggled
Kohteen kehys vaihdettu
- Item background toggled
Kohteen tausta vaihdettu
- Select background color
Valitse taustaväri
- Select frame color
Valitse kehyksen väri
- Item blend mode changed
Kohteen sekoitustapa muutettu
- Item transparency changed
Kohteen läpinäkyvyys muutettu
- Item id changed
Kohteen id (tunnus) muutettu
- Item rotation changed
Jäsen rotaatiota muutettu
@@ -17169,115 +17101,104 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Globaalit vaihtoehdot
- Position and size
Sijainti ja koko
- Reference point
Viitepiste
- X
X
- Y
Y
- Width
Leveys
- Height
Korkeus
- Page
Sivu
- ...
- ...
-
-
- Rotation
Rotaatio
- °
°
- Frame
Raami
- mm
mm
- Join style
Yhdistämistyyli
- Rendering
Hahmotetaan
- Blending mode
Sekoitustila
- Thickness
Paksuus
- Color...
Väri...
- Background
Tausta
- Transparency
Läpinäkyvyys
- Item ID
Osan ID
- Id
Tunniste
@@ -17310,18 +17231,18 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Nimiön väri muutettu
- Insert expression
Lisää lauseke
- Label alignment changed
Nimiön kohdistus muutettu
@@ -17427,8 +17348,9 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
QgsComposerLegend
+ Legend
- Merkkien määritykset
+ Merkkien määritykset
@@ -17593,12 +17515,12 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Selitteen ryhmä lisätty
- Map %1
Kartta %1
- None
Ei mitään
@@ -18028,107 +17950,100 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
QgsComposerMap
- Map %1
Kartta %1
- Map will be printed here
Kartta tulostuu tähän
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Hahmota
- Rectangle
Suorakulmio
- Solid
Kiinteä
- Cross
Risti
- Markers
-
-
- Decimal
Desimaali
- DegreeMinute
AsteetMinuutit
- DegreeMinuteSecond
AsteetMinuutitSekunnit
+ No frame
- Ei raamia
+ Ei raamia
- Zebra
Zebra
- Map scale changed
Kartan mittakaavaa muutettu
- Map rotation changed
Kartan rotaatiota muutettu
- Map extent changed
Kartan laajuutta muutettu
- Select font color
Valitse merkin väri
@@ -18144,235 +18059,164 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Valitse ruudukon raamin täyttöväri
- Canvas items toggled
Mäyttöalan kohteet vaihdettu
- None
Ei mitään
- Overview frame style changed
Yhteenveto raamityyleistä muutettu
- Overview centering mode changed
Yhteenvedon keskittämisen tila muuttunut
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
- Millimetri
-
-
- Centimeter
-
-
- change...
- muuta...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Ruudukon valinta vaihdettu
- Grid interval changed
Ruudukon intervalli muutettu
- Grid offset changed
Ruudukon offsetti muutettu
- Grid line style changed
Ruudukon viivatyyli muutettu
- Grid type changed
Ruudukon tyyppi muutettu
+ Grid cross width changed
- Ruudukon ristikon leveys muutettu
+ Ruudukon ristikon leveys muutettu
- Annotation font changed
Huomautuksen kirjaisin muutettu
+ Label font changed
- Nimiön fontti muutettu
+ Nimiön fontti muutettu
- Annotation distance changed
Huomautuksen etäisyys muutettu
- Annotation format changed
Huomautuksen muoto muuttunut
- Annotation toggled
Huomautukset päällä/pois
- Changed annotation precision
Muutettu huomautuksen tarkkuutta
- Changed grid frame style
Muutettu ruudukon raamin tyyyiliä
+ Changed grid frame width
- Muutettu ruudukon raamin leveyttä
+ Muutettu ruudukon raamin leveyttä
- Changed grid frame line thickness
Muutettu ruudukon raamiviivan paksuutta
- Grid frame color changed
Ruudukon raamin väriä muutettu
- Grid frame first fill color changed
Ruudukon raamin ensimmäistä täyttöväriä muutettu
- Grid frame second fill color changed
Ruudukon raamin toista täyttöväriä muutettu
- Inside frame
Kehyksen sisällä
- Outside frame
Kehyksen ulkopuolella
- Disabled
Käytöstä poistettu
- Horizontal
Vaakataso
- Vertical
Pystytaso
- Annotation position changed
Huomautuksen sijainti muutettu
- Changed annotation direction
Muutettu huomautuksen suuntaa
- Map %1
Kartta %1
@@ -18385,377 +18229,287 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Kartan vaihtoehdot
- Map
Kartta
- Main properties
Kartan ominaisuudet
- Update preview
Päivitä esikatselu
- Scale
Mittakaava
- Map rotation
Kartan kierto
- Draw map canvas items
Piirrä kartan näyttöalueen osat
- Lock layers for map item
Lukitse tasot kartalle
- Extents
Alueet
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
Aseta kartta näyttöalueen laajuiseksi
- X min
X min
- View extent in map canvas
Näytä laajuus karttapohjalla
- Controlled by atlas
Atlaksen ohjaama
- Margin around feature
Marginaali ominaisuuden ympärillä
- %
%
- Fixed scale
Kiinteä mittakaava
- Use one of the predefined scales of the project where the atlas feature best fits.
Käytä yhtä projektissä määritellyistä mittakaavoista joka parhaiten sopii atlas ominaisuuteen.
- Predefined scale (best fit)
Edeltä määritelty mittakaava (parhaiten sopiva)
+ Show grid
- Näytä ruudukko
+ Näytä ruudukko
+ Grid &type
- Ruudukon &tyyppi
+ Ruudukon &tyyppi
- Offset
Siirtymä
- mm
mm
- Blend mode
Sekoitustila
- Interval
Intervalli
- Grid frame
Ruudukon reunus
- Frame size
Reunuksen koko
- Frame line thickness
Reunusviivan paksuus
- Color...
Väri...
- Frame fill colors
Reunuksen täyttöväri
- Marker style
- Symboliin tyyli
-
-
- Overview blending mode
Yhteenvedon sekoituksen tila
- Invert overview
Käännä yhteenveto
- Center on overview
Keskitä yhteenveto
- X
X
- °
°
- Y
Y
- Cross width
Ristin leveys
- Frame style
Raamin tyyli
- Line style
Viivatyyli
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Ruudukon tyyppi
-
-
- CRS
- CRS
-
-
- change...
muuta...
- Interval units
-
-
- Map unit
-
-
- Millimeter
- Millimetri
-
-
- Centimeter
-
-
- No frame
- Ei raamia
-
-
- Zebra
- Zebra
-
-
- Draw coordinates
Piirrä koordinaatit
- Format
Tiedostomuoto
- Left
Vasen
- Right
Oikea
- Top
Ylhäällä
- Bottom
Alhaalla
- Font
Kirjasin
- Font...
Kirjain...
- Font color
- Kirjaimen väri
-
-
- Distance to map frame
Etäisyys kartan reunukseen
- Coordinate precision
Koordinaattien tarkkuus
- Font color...
Kirjaimen väri...
- Overview
Yhteenveto
- Overview frame
Yhteenvedon raami
- Overview style
Yhteenvedon tyyli
- Change...
Muuta...
@@ -18796,18 +18550,18 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
QgsComposerPicture
- Picture expression parsing error: %1
Kuvalausekkeen jäsentelyvirhe: %1
- Composer
Mallin muodostus
- Picture expression eval error: %1
Kuvalausekkeen evaluontivirhe: %1
@@ -18822,64 +18576,64 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Picture changed
Kuva muuttunut
- Expression based image path
Lausekeperusteinen kuvan polku
- Picture rotation changed
Kuvan rotaatio muutettu
- Select new preview directory
Valitse uusi esikatselu kansio
- Picture resize mode changed
Kuvan koon muuttamisen tilaa muutettu
- Picture placement changed
Kuvan sijoittelua muutettu
- Picture source changed
Luvan lähdettä muutettu
- Picture source expression
Kuvan lähdelauseke
- Rotation synchronisation toggled
Rotaation synkronointi vaihdettu
- Rotation map changed
Rotaatio kartta muutettu
- Map %1
Kartta %1
- Creating icon for file %1
Luodaan ikonia tiedostolle %1
@@ -19046,32 +18800,32 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
QgsComposerScaleBar
- units
yksiköt
- km
km
- m
m
- miles
mailit
- ft
jalat
- Nm
mpk
@@ -19080,38 +18834,38 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
QgsComposerScaleBarWidget
Single Box
Yksinkertainen kehys
Double Box
Kaksoiskehys
Line Ticks Middle
Viivan ruksit keskellä
Line Ticks Down
Viivan ruksit alhaalla
Line Ticks Up
Viivan ruksit ylhäällä
Numeric
Numeerinen
@@ -19151,144 +18905,119 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
meripenikulmat
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Valitse merkin väri
-
-
- Select stroke color
-
-
- Map %1
Kartta %1
- Scalebar map changed
Mittakaavajanan kartta muutettu
- Scalebar line width
Mittakaavajanan viivan leveys
- Scalebar segment size
Mittakaavajanan segmentin koko
- Scalebar segments left
Mittakaavajanan segmenttejä vasemmalla
- Number of scalebar segments changed
Mittakaavajanan muutettujen segmenttien lukumäärä
- Scalebar height changed
Mittakaavajanan korkeus muutettu
- Scalebar font changed
Mittakaavajanan kirjaisin muutettu
- Scalebar font color changed
Mittakaavajanan kirjainten väri muutettu
- Scalebar color changed
Mittakaavajanan väri muutettu
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Mittakaavajanan viivan väri muutettu
- Scalebar unit text
Mittakaavajanan yksikön teksti
- Scalebar map units per segment
Mittakaavajanan kartan yksiköitä per segmentti
- Scalebar style changed
Mittakaavajanan tyyli muutettu
- Scalebar label bar space
Mittakaavajanan nimiön tila
- Scalebar box content space
Mittakaavajanalaatikon sisällön tila
- Scalebar alignment
Mittakaavajanan kohdistus
- Scalebar changed to map units
Mittakaavajana muutettu karttayksiköihin
- Scalebar changed to feet
Mittakaavajana muutettu jaloiksi
- Scalebar changed to nautical miles
Mittakaavajana muutettu meripenikulmiksi
- Scalebar changed to meters
Mittakaavajana muutettu metreiksi
- Scalebar line join style
Mittakaavajanan yhdistämistyyli
- Scalebar line cap style
Mittakaavajanan päätyjen tyyli
@@ -19431,11 +19160,6 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Secondary fill color...
-
-
- Stroke color...
Viivan väri...
@@ -19445,37 +19169,37 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Ellipse
Ellipsi
Rectangle
Suorakulmio
Triangle
Kolmio
- Shape style changed
Muodon tyyli muutettu
- Shape radius changed
Muodon sädettä muutettu
- Shape type changed
Muodon tyyppi muutettu
@@ -19886,107 +19610,107 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
QgsComposition
- Label added
Nimiö lisätty
- Map added
Kartta lisätty
- Arrow added
Nuoli lisätty
- Scale bar added
Mittakaavajana lisätty
- Shape added
Muoto lisätty
- Picture added
Kuva lisätty
- Legend added
Selite lisätty
- Table added
Taulu lisätty
- Aligned items left
Kohdistettu jäsenet vasemmalle
- Aligned items horizontal center
Kohdista jäsenet vaakatasossa keskelle
- Aligned items vertical center
Kohdista jäsenet pystytasossa keskelle
- Aligned items right
Kohdistettu jäsenet oikealle
- Aligned items top
Kohdistettu jäsenet ylös
- Aligned items bottom
Kohdistettu jäsenet alas
- Items locked
Jäsenet lukittu
- Items unlocked
Jäsenet poistettu lukituksesta
- Item z-order changed
Jäsenen z-järjestys muutettu
- Remove item group
Poista jäsenen ryhmä
- Frame deleted
Frame poistettu
- Item deleted
Jäsen poistettu
- Multiframe removed
Usea frame poistettu
@@ -20043,148 +19767,148 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Landscape
Vaakasuora
Portrait
Pystysuora
Map %1
Kartta %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
Käyttäjävalintainen
@@ -20202,131 +19926,109 @@ Ole ystävällinen ja yritä pienemmällä resoluutiolla tai pienemmällä paper
Paperi ja laatu
- Presets
Esiasetukset
- ...
- ...
-
-
- Width
Leveys
- Height
Korkeus
- Units
Yksiköt
- Number of pages
Sivujen lukumäärä
- Orientation
Suuntautuminen
- Export resolution
Vie resoluutio
- Print as raster
Tulosta rasterina
-
- Snap tolerance
- Kiinnitystoleranssi
-
-
- px
- px
-
Change...
Muuta...
- Page background
Sivun tausta
+ Grid
- Ruudukko
+ Ruudukko
- dpi
dpi
- World file on
Worldtiedosto voimassa
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Ruudukon siirtymä
- x:
x:
- y:
y:
+ Spacing
- Välistys
+ Välistys
+ Snap to alignments
- Kiinnitä kohdistuksiin
+ Kiinnitä kohdistuksiin
+ Tolerance
- Toleranssi
+ Toleranssi
@@ -21503,7 +21205,7 @@ ja nykyinen tiedosto on [%3]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23242,7 +22944,7 @@ Jätä tyhjäksi salliaksesi automaattisen maksimi arvon.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Ei voitu asettaa saraketta '%1' esikatselu sarakkeeksi.
@@ -23571,7 +23273,7 @@ Jäsentelyvirhe:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23584,7 +23286,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24687,7 +24389,7 @@ MyForms.py tulee sijaita PYTHONPATH, .qgis/python, tai projektihakemistossa.<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26004,7 +25706,7 @@ Ole ystävällinen ja valise uudelleen hyväksyttävä tiedosto.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26956,17 +26658,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Symboli
- Value
Arvo
- Label
Nimiö
@@ -27059,41 +26761,41 @@ p, li { white-space: pre-wrap; }
Vaativammat
- Symbol levels...
Symbolin tasot...
- Error
Virhe
- There are no available color ramps. You can add them in Style Manager.
Liukvärejä ei ole määritelty. Voit määritellä ne tyylien hallinnassa.
- The selected color ramp is not available.
Valittu liukuväri ei ole käytettävissä.
- Warning
Varoitus
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
Luonnollisen katkaisun luokittelu (Jenks) on O(n2) kompleksinen, luokittelusi voi kestää kauan.
Näppäile Cancel keskeyttääksesi katkojen luokittelun laskennan tai OK jatkaaksesi.
- Renderer creation has failed.
Hahmottaja luominen on epäonnistui.
@@ -27277,10 +26979,7 @@ Näppäile Cancel keskeyttääksesi katkojen luokittelun laskennan tai OK jatkaa
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Oletko varma että haluat poistaa valitun tason?
- Oletko varma että haluat poistaa %n valittua tasoa?
-
+ Oletko varma että haluat poistaa valitun tason? Oletko varma että haluat poistaa %n valittua tasoa?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29036,7 +28735,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29075,7 +28774,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29149,7 +28848,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29916,10 +29615,7 @@ rivillä %2 sarakkeessa %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Jäljellä on vielä %n käsittelemätön kerros, joka menetetään jos suljet nyt.
- Jäljellä on vielä %n käsittelemätöntä kerrosta, jotka menetetään jos suljet nyt.
-
+ Jäljellä on vielä %n käsittelemätön kerros, joka menetetään jos suljet nyt. Jäljellä on vielä %n käsittelemätöntä kerrosta, jotka menetetään jos suljet nyt.
@@ -30049,12 +29745,9 @@ rivillä %2 sarakkeessa %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Verkko katkaistiin %n sekunnin toimettomuuden jälkeen.
-Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta.
- Verkko katkaistiin %n sekunnin toimettomuuden jälkeen.
-Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta.
-
+ Verkko katkaistiin %n sekunnin toimettomuuden jälkeen.
+Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. Verkko katkaistiin %n sekunnin toimettomuuden jälkeen.
+Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta.
@@ -31249,7 +30942,7 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. Tason nimiöiden asetukset
- Label this layer with
Nimiöi tämä taso
@@ -31329,22 +31022,22 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta.
...
...
@@ -31400,7 +31093,7 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. Monirivinen
- Automated placement settings (apply to all layers)
Automatisoidut sijoitteluasetukset (käytä kaikilla tasoilla)
@@ -31430,7 +31123,7 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta.
Rendering
Hahmotus
@@ -31518,7 +31211,7 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta.
Alignment
Kohdistus
@@ -31555,7 +31248,7 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. Toista
- Discourage labels from covering features
Vastusta nimiöiden peittävän ominaisuuksia
@@ -31650,82 +31343,82 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. Puskuri
- Labels will not show if larger than this on screen
Nimiöt eivät näy jos suurempia kuin tämä ruudulla
- px
px
- Data defined
Datan määräämä
- X
X
- Y
Y
- Coordinate
Koordinaatti
- Preserve data rotation values
Säilytä tiedon kiertoarvot
- horizontal
vaakataso
- vertical
vaakatasossa
- Label options
Nimiön vaihtoehdot
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Arvo < 0 edustaa mittakaavaa lähempänä kuin 1:1, esim. -10 = 10:1.<br>Arvo 0 poistaa nimenomaisen rajan.
- Maximum
Maksimi
- Pixel size-based visibility (labels in map units)
Pikselin kokoon perustuva näköisyys (nimiöt karttayksiköissä)
- Labels will not show if smaller than this on screen
Nimiöt eivät näy jos pienempiä kuin tämä ruudulla
- Minimum
Minimi
@@ -31735,7 +31428,7 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. <
- Scale-based visibility
Mittakaava perusteinen näkyvyys
@@ -31773,17 +31466,17 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. Taaksepäin
- Priority
Prioriteetti
- Low
Matala
- High
Korkea
@@ -31936,7 +31629,7 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta.
Rotation
Rotaatio
@@ -31988,17 +31681,17 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. Etäisyys
- outside
ulkopuolella
- inside
sisällä
- Maximum angle between curved characters
Maksimi kulma kaarevien merkkien välillä
@@ -32104,62 +31797,62 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. symbolin yksiköt
- Merge connected lines to avoid duplicate labels
Yhdistä kytketyt viivat välttääksesi monistetut nimiöt
- Label every part of multi-part features
Nimiöi kaikki moniosaisen kohteen osat
- Feature options
Ominaisuuden vaihtoehdot
- Suppress labeling of features smaller than
Häivytä nimiöinti kohteilta jotka ovat pienempiä kuin
- mm
mm
- Show all labels for this layer (including colliding labels)
Näytä kaikki nimiöt tällä tasolla (myös törmäävät nimiöt)
- Show upside-down labels
Näytä ylösalaisin nimiöt
- never
ei koskaan
- when rotation defined
kun rotaatio on määritelty
- always
aina
- Limit number of features to be labeled to
Rajoita ominaisuuksien lukumäärää jotka nimiöidään
- Number of features sent to labeling engine, though not all may be labeled
Ominaisuuksien joukko lähetetty nimiöintiin vaikka kaikkia ei ehkä nimiöidäkkään
@@ -32169,17 +31862,17 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta. Sijainti
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Poista merkintä kirjoittaaksesi nimiöintityökalulta perityn kierron kiinnityksessä ja NULL kiinnityksen poistossa
- Always show
Näytä aina
- Show label
Näytä nimiö
@@ -32195,12 +31888,12 @@ Tämä voi johtua ongelmasta verkkoyhteydessä, tai WMS palvelimesta.
QgsLayerTreeModel
- Double-click to view legend
Tupla-klikkaa nähdäksesi selitteen
- following %1 items
not displayed
seuraavia %1 jäsentä ei näytetä
@@ -32257,12 +31950,12 @@ not displayed
QgsLegendModel
- Group
Ryhmä
- No Legend Available
Selitettä ei käytettävissä
@@ -32490,18 +32183,18 @@ not displayed
QgsMapCanvas
- canvas
karttapohja
- Rendering
Hahmotetaan
- Canvas refresh: %1 ms
Karttapohjan virkistys: %1 ms
@@ -33686,10 +33379,7 @@ not displayed
%n more
unread messages
-
- %n lisää
- %n lisää
-
+ %n lisää %n lisää
@@ -33827,7 +33517,7 @@ not displayed
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Yhteys epäonnistui - Host nimeä ei ole määritelty.
@@ -33836,7 +33526,7 @@ not displayed
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Yhteys epäonnistui - Tietokannan nimeä ei ole määritelty.
@@ -35389,10 +35079,7 @@ Virheilmoitus:
Coordinate Reference System (%n available)
crs count
-
- Koordinaattijärjestelmä (%n vapaana)
- Koordinaattijärjestelmä (%n vapaana)
-
+ Koordinaattijärjestelmä (%n vapaana) Koordinaattijärjestelmä (%n vapaana)
Solid
Kiinteä
Dots
Pisteillä
Crosses
Risteillä
- Detected active locale on your system: %1
Käyttöjärjestelmästäsi löytyi: %1
- To vertex
verteksiksi
- To segment
segmentiksi
- To vertex and segment
verteksiksi ja segmentiksi
- map units
Kartta yksikkö
- pixels
pikseleihin
- Semi transparent circle
Osittain läpinäkyvä ympyrä
- Cross
Risti
- None
Ei mitään
- QGIS files
QGIS tiedostot
- Off
Pois
- QGIS
QGIS
- GEOS
GEOS
- Round
Pyöreä
- Mitre
Katkaisu
- Bevel
Viistoreuna
- Save default project
Tallenna oletus projekti
- You must set a default project
Sinun tulee asettaa oletus projekti
- Current project saved as default
Nykyine projekti tallennettu oletukseksi
- Error saving current project as default
Virhe tallennettaessa nykyistä projektia oletukseksi
- Choose a directory to store project template files
Valitse hakemisto jonne projektin mallitiedostot tallennetaan
@@ -36521,105 +36208,105 @@ Aina verkosta: lataa aina verkosta äläkä tarkista onko välimuistin merkintä
Näytä kartalla näkyvät ominaisuudet
- Choose project file to open at launch
Valitse projektitiedosto joka avataan käynnistettäessä
- Create Options - %1 Driver
Luo vaihtoehdot - %1 ajuri
- Create Options - pyramids
Luo vaihtoehdot - pyramidit
- Restore UI defaults
Palauta käyttäjäliitynnän oletukset
- Are you sure to reset the UI to default (needs restart)?
Haluatko todella palauttaa käyttäjäliitynnän oletukset (vaatii uudelleenkäynnistyksen)?
- Overwrite
Korvaa
- If Undefined
Jos määrittelemätön
- Unset
Poista asetus
- Prepend
Liitä alkuun
- Append
Lisää
- Choose a directory
Valitse kansio
- Enter scale
Anna mittakaava
- Scale denominator
Mittakaavan nimittäjä
- Load scales
Lataa mittakaavat
- XML files (*.xml *.XML)
XML tiedostot (*.xml *.XML)
- Save scales
Talleta mittakaavat
- No Stretch
Ei levitystä
- Stretch To MinMax
Levitä min/max
- Stretch And Clip To MinMax
Levitä ja leikkaa min/max
- Clip To MinMax
Leikkaa min/max
@@ -36639,7 +36326,7 @@ Aina verkosta: lataa aina verkosta äläkä tarkista onko välimuistin merkintä
General
Yleiset
@@ -36822,7 +36509,7 @@ Aina verkosta: lataa aina verkosta äläkä tarkista onko välimuistin merkintä
...
...
@@ -36938,7 +36625,7 @@ Aina verkosta: lataa aina verkosta äläkä tarkista onko välimuistin merkintä
Remove
Poista
@@ -36946,7 +36633,7 @@ Aina verkosta: lataa aina verkosta äläkä tarkista onko välimuistin merkintä
Add
Lisää
@@ -37206,22 +36893,7 @@ Aina verkosta: lataa aina verkosta äläkä tarkista onko välimuistin merkintä
Minimi viivan / ääriviivan leveys millimetreissä.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Häivytä ominaisuustietojen pop-up ikkunat ominaisuuden luonnin jälkeen
@@ -37518,18 +37190,22 @@ Aina verkosta: lataa aina verkosta äläkä tarkista onko välimuistin merkintä
Väri...
+ Grid defaults
- Ruudukon oletusarvot
+ Ruudukon oletusarvot
+ Spacing
- Välistys
+ Välistys
mm
mm
@@ -37550,370 +37226,372 @@ Aina verkosta: lataa aina verkosta äläkä tarkista onko välimuistin merkintä
Snap tolerance
Kiinnitystoleranssi
+ Guide defaults
- Oppaan oletusarvot
+ Oppaan oletusarvot
- Feature creation
Ominaisuuden luonti
- Validate geometries
Tarkista geometriat
- Reuse last entered attribute values
Käytä uudelleen viimeksi annettua ominaisuustiedon arvoa
- Rubberband
Värinavigaattori
- Line color
Viivan väri
- Line width in pixels
Viivan leveys pikseleinä
- Line width
Viivan leveys
- Snapping
Kohdistus
- Default snap mode
Oletus kohdistustila
- Default snapping tolerance
Oletus kohdistustilan toleranssi
- Search radius for vertex edits
Hakusäde kärkipisteiden muokkaukseen
- map units
karttayksiköt
pixels
pikselit
- Open snapping options in a dock window (QGIS restart required)
Avaa kiinnityksen vaihtoehdot telakkaikkunaan (QGIS uudelleenkäynnistys tarvitaan)
- Vertex markers
Kärkipisteen symboli
- Marker style
Symboliin tyyli
- Marker size
Symbolin koko
- Show markers only for selected features
Näytä symbolit ainoastaan valituille kohteille
- Curve offset tool
Käyrän siirtymän työkalu
- Miter limit
Liitynnän rajat
- Join style
Yhdistä tyyli
- Quadrant segments
Neljännessegmentit
- GDAL driver options
GDAl ajurin vaihtoehdot
- Edit Pyramids Options
Muokkaa pyramidien vaihtoehtoja
- Edit Create Options
Muokkaa luonnin vaihtoehtoja
- GDAL drivers
GDAL ajurit
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
Joissain tapauksissa useampaa kuin yhtä GDAL ajuria voidaan käyttää lataamaan samaa rasteriformaattia. Käytä alla olevaa listaa määritelleksesi mitä käytät.
- Name
Nimi
- ext
laajuus
- Flags
Liput
- Description
Kuvaus
- CRS for new layers
CRS uusille tasoille
- Select...
Valitse...
- Use &project CRS
Kätä &projektin CRSää
- Prompt for &CRS
Kysy &CRSää
- Use default CRS displa&yed below
Käytä oletus CRSää jota nä&ytetään alla
- When a new layer is created, or when a layer is loaded that has no CRS
Kun uusi taso on luotu, tai kun taso on ladattu, eikä sillä ole CRS
- Default CRS for new projects
Oletus CRS uusille projekteille
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Ota käyttöön automaattisesti 'lennossa' uudelleen projektointi jos lisätyn uuden tason CRS ero jo olemassa olevien tasojen CRS:stä. Nykyisen tason/tasojen CRS otetaan käyttöön.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Ota käyttöön automaattinen 'lennossa' uudelleen projektointi jos tasoilla on eri CRS
- Always start new projects with this CRS
Aloita uudet projektit aina tällä CRS:llä
- Enable 'on the &fly' reprojection by default
Aseta '&lennossa' uudelleen projektointi oletukseksi
- Don't enable 'on the fly' reprojection
Älä mahdollista 'lennossa' uudelleen projektointia
- Default datum transformations
Oletus koordinaattimuunnoksesta
- Source CRS
Syötettävä CRS
- Destination CRS
Kohteen CRS
- Source datum transform
Syötettävän koordinaattimuunnos
- Destination datum transform
Tuloksen koordinaattimuunnos
- Ask for datum transformation when no default is defined
Kysy koordinaattimuunnosta jos oletusta ei ole määritelty
- Override system locale
Ohita järjestelmän locale
- Locale to use instead
Locale jota käytetään
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Huomautus:</b> Mahdollistamalla/ muuttamalla ohituksen locale arvoon tarvitsee sovelluksen (QGIS) uudelleen käynnistyksen muutoksen voimaantuloon
- Additional Info
Lisäinfo
- Detected active locale on your system:
Löydettiin aktiivinen locale järjestelmässäsi:
- WMS search address
WMS haku osoite
- Timeout for network requests (ms)
Aikakatkaisu verkossa esitettyihin pyyntöihin (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Oletus vanhenemisen ajanjakso WMS-C/WMTS kuvakkeille (tunneissa)
- Max retry in case of tile request errors
Laattojen uusintapyyntöjen maksimimäärä
- User-Agent
Käyttäjän toimija
- Cache settings
Välimuistin asetukset
- Directory
Hakemisto
- Size [KiB]
Koko [KiB]
- Clear
Tyhjennä
- Use proxy for web access
Käytä proxya verkon käytössä
- Host
Isäntä
- Port
Portti
- User
Käyttäjä
- Leave this blank if no proxy username / password are required
Jätä tämä tyhjäksi jos proxylle ei tarvita käyttäjänimi/salasanaa
- Password
Salasana
- Proxy type
Proxy tyyppi
- Exclude URLs (starting with)
Jätä URL-osoitteet (alkaen)
@@ -39891,7 +39569,7 @@ Virhe: %2
Liitännäinen on kadonnut
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
Liitännäinen näyttää olevan asennettu mutta en tiedä minne. Oletettavasti liitännäispaketti sisälsi virheellisesti nimetyn hakemiston.
Ole hyvä ja etsi asennettujen liitännäisten lista. Olen varma että löydät liitännäisen sieltä, mutta en voi päätellä mikä niistä. Tämä tarkoittaa myös etten voi päätellä onko liitännäinen asennettu enkä voi tiedottaa mahdollisista päivityksistä. Liitännäinen voi kuitenkin toimia. Ole ystävällinen ja ota yhteyttä tekijään ja lähetä tiedot tapahtuneesta.
@@ -40614,7 +40292,7 @@ Sinun tulee käynnistää QGIS uudelleen ladataksesi sen.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40632,7 +40310,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40650,7 +40328,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41511,156 +41189,156 @@ Valitse Ohita jatkaaksesi lataamista ilman puuttuvia tasoja. Valitse Peruuta pal
QgsProjectProperties
- Layer
Taso
- Type
Tyyppi
- Identifiable
Tunnistettava
- Vector
Vektori
- WMS
WMS
- Raster
Rasteri
- Coordinate System Restriction
Koordinaattijärjestelmän rajoitus
- No coordinate systems selected. Disabling restriction.
Koordinaattijärjestelmää ei valittu. Poistetaan rajoitukset.
- Selection color
Valinnan väri
- Measure tool (CRS transformation: %1)
Mittatyökalu (CRS muunnos: %1)
- Canvas units (CRS transformation: %1)
Karttanäytön yksiköt (CRS muunnos: %1)
+ OFF
OFF
+ ON
ON
- CRS %1 was already selected
CRS %1 oli jo valittu
- Coordinate System Restrictions
Koordinaattijärjestelmän rajoitukset
- The current selection of coordinate systems will be lost.
Proceed?
Nykyinen koordinaattijärjestelmän valita menetetään.
Jatkatko?
- Select print composer
Valitse tulosteen muodostaja
- Composer Title
Muodostajan otsikko
- Select restricted layers and groups
Valitse rajoitetut tasot ja ryhmät
- Enter scale
Anna mittakaava
- Scale denominator
Mittakaavan nimittäjä
- Load scales
Lataa mittakaavat
- XML files (*.xml *.XML)
XML tiedostot (*.xml *.XML)
- Save scales
Talleta mittakaavat
- Select a valid symbol
Valitse oikea symboli
- Invalid symbol :
Virheellinen symboli :
- Parameters:
Parametrit:
+ Select %1 from pull-down menu to adjust radii
Valitse %1 alasvetovalikosta asettaaksesi säteen
- Can only use ellipsoidal calculations when CRS transformation is enabled
Ellipsoidin laskentaa voidaan käyttää ainoastaan kun CRS muunnos on käytössä
@@ -41685,7 +41363,6 @@ Proceed?
Project title
Projektin otsikko
@@ -41725,37 +41402,37 @@ Proceed?
Tallenna polut
- Measure tool
Mittatyökalu
- Semi-minor
Semi-minor
- Semi-major
Semi-major
- Used when CRS transformation is turned off
Käytetään kun CRS muunnos on pois käytöstä
- Canvas units
Karttapohjan yksiköt
- Meters
Metrit
- Feet
Jalkoja
@@ -41787,97 +41464,97 @@ Proceed?
OWS palvelin
- Ellipsoid
(for distance calculations)
Ellipsoidi (etäisyyksien laskentaan)
- Degree
Asteet
- Degree display
Astenäyttö
- Decimal degrees
Desimaaliasteet
- Degrees, Minutes
Asteet, Minuutit
- Degrees, Minutes, Seconds
Asteet, minuutit, sekunnit
- Precision
Tarkkuus
- Automatically sets the number of decimal places in the mouse position display
Asettaa automaattisesti desimaalipaikkojen lukumäärän hiiren sijaintinäyttöön
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Desimaalipaikkojen lukumäärä jota käytetään kun näytetään hiiren sijainti automaattisesti siten että liikutettaessa hiirtä yhden pikselin muuttuu sijaintinäyttö
- Automatic
Automaattinen
- Sets the number of decimal places to use for the mouse position display
Asettaa desimaalipaikkojen lukumäärän hiiren sijaintinäyttöön
- Manual
Ohjekirja
- The number of decimal places for the manual option
Desimaalipaikkojen lukumäärän manuaaliseen vaihtoehtoon
- decimal places
desimaalipaikat
- Project scales
Projektin mittakaavat
- ...
...
- Enable 'on the fly' CRS transformation
Aseta 'lennossa' CRS muunnokselle
@@ -41887,69 +41564,69 @@ Proceed?
Tunnistettavat tasot
- Project layers
Projektin tasot
- Layer
Taso
- Type
Tyyppi
- Identifiable
Tunnistettava
- Marker
Symboli
- Line
Viiva
- Default symbols
Oletus symbolit
- Fill
Täyttö
- Color Ramp
Väritys
- Transparency
Läpinäkyvyys
- %
%
- Style Manager
Tyylien hallinta
- Options
Asetukset
@@ -41959,170 +41636,165 @@ Proceed?
Relaatiot
- Project file
- Projektitiedosto
-
-
- Nautical miles
meripenikulmat
- Assign random colors to symbols
Määritä satunnaisvärit symboleille
- Service capabilities
Palvelu mahdollisuudet
- Person
Henkilö
- Title
Otsikko
- Organization
Organisaatio
- Online resource
Online resurssit
- E-Mail
E-Mail
- Phone
Puhelin
- Abstract
Abstrakti
- Fees
Palkkiot
- Access constraints
Käytön reunaehdot
- Keyword list
Avainsanaluettelo
- WMS capabilities
WMS valmiudet
- Add geometry to feature response
Lisää geometria kohteen vastaukseen
- Min. X
Min. X
- Min. Y
Min. Y
- Max. X
Max. X
- Max. Y
Max. Y
- Use Current Canvas Extent
Käytä nykyisen näyttöalueen laajuutta
- Used
Käytetty
- Exclude composers
Poissulje muodostajat
- WFS capabilities
WFS valmiudet
- WCS capabilities
WCS valmiudet
- Exclude layers
Poissulje tasot
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
JPEG kuvien laatu (10 : pienet kuvat - 100 : paras laatu )
- Published
Julkaistu
- Update
Päivitä
- Insert
Lisää
- Delete
Poista
- Unselect all
Poista valinta kaikista
- Select all
Valitse kaikki
@@ -42133,39 +41805,39 @@ Proceed?
Makrot
- Advertised URL
Ilmoitetut URL
- Width
Leveys
- Height
Korkeus
- Maximums for GetMap request
Maksimit GetMap pyynnölle
- Advertised extent
Ilmoitettu laajuus
- CRS restrictions
CRS rajoitukset
- Python macros
Python makrot
@@ -42279,10 +41951,7 @@ Tästä johtuen projektoinnin valinta ei toimi...
The where clause returned %n row(s).
returned test rows
-
- Where lauseke palautti %n rivin.
- Where lauseke palautti %n riviä.
-
+ Where lauseke palautti %n rivin. Where lauseke palautti %n riviä.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42354,7 +42023,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42365,7 +42034,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42381,7 +42050,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -44047,7 +43716,7 @@ Klikkaa ohje näppäintä saadaksesi oikeat luonnin vaihtoehdot tälle muodolle.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45127,10 +44796,7 @@ keskihajonta ×
Filter returned %n feature(s)
number of filtered features
-
- Suodatin palautti %n kohteen
- Suodatin palautti %n kohdetta
-
+ Suodatin palautti %n kohteen Suodatin palautti %n kohdetta
@@ -45820,10 +45486,7 @@ keskihajonta ×
Found %n matching feature(s).
test result
-
- Vastaavia kohteita löytyi %n kappale.
- Vastaavia kohteita löytyi %n kappaletta.
-
+ Vastaavia kohteita löytyi %n kappale. Vastaavia kohteita löytyi %n kappaletta.
Validation finished (%n error(s) found).
number of geometry errors
-
- Tarkistus loppui ( %n virhe löytyi).
- Tarkistus loppui ( %n virhettä löytyi).
-
+ Tarkistus loppui ( %n virhe löytyi). Tarkistus loppui ( %n virhettä löytyi).
%n selected geometries
selected geometries
-
- %n valittu geometria
- %n valittua geometriaa
-
+ %n valittu geometria %n valittua geometriaa
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47379,7 +47036,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47992,8 +47649,8 @@ Haluatko ylikirjoittaa [%2] relaation?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -48030,124 +47687,152 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Rajapinnan lataus epäonnistui
+ Rajapinnan lataus epäonnistui
+ Failed to connect to database
- Yhteys tietokantaan epäonnistui
+ Yhteys tietokantaan epäonnistui
+ A connection to the SQL Anywhere database cannot be established.
- Yhteyttä SQL Anywhere tietokantaan ei voida perustaa.
+ Yhteyttä SQL Anywhere tietokantaan ei voida perustaa.
+ No suitable key column
- Ei sopivaa avainsaraketta
+ Ei sopivaa avainsaraketta
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- Lähtörelaatiolle %1 ei ole sopivaa saraketta käytettäväksi yksilöllisenä avaimena.
+ Lähtörelaatiolle %1 ei ole sopivaa saraketta käytettäväksi yksilöllisenä avaimena.
QGIS tarvitsee relaatiolle kokonaisluku sarakkeen joka ei ole suurempi kuin 32 bittiä sisältäen yksilöllisen avaimen.
+ Error loading attributes
- Virhe ominaisuustietojen latauksessa
+ Virhe ominaisuustietojen latauksessa
+ Ambiguous field!
- Epäselvä kenttä!
+ Epäselvä kenttä!
+ Duplicate field %1 found
- Duplikaatti tieto %1 löydetty
+ Duplikaatti tieto %1 löydetty
+ Read attempt on an invalid SqlAnywhere data source
- Luku yritys virheelliseen SqlAnywhere tiedon lähteeseen
+ Luku yritys virheelliseen SqlAnywhere tiedon lähteeseen
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Virhe lisättäessä kohteita
+ Virhe lisättäessä kohteita
+ Error deleting features
- Virhe poistettaessa kohteita
+ Virhe poistettaessa kohteita
+ Error adding attributes
- Virhe lisättäessä atribuutteja
+ Virhe lisättäessä atribuutteja
+ Error deleting attributes
- Virhe poistettaessa omainaisuustietoja
+ Virhe poistettaessa omainaisuustietoja
+ Attribute not found
- Ominaisuustietoa ei löytynyt
+ Ominaisuustietoa ei löytynyt
+ Error updating attributes
- Virhe päivitettäessä ominaisuustietoja
+ Virhe päivitettäessä ominaisuustietoja
+ Error updating features
- Virhe päivitettäessä kohteita
+ Virhe päivitettäessä kohteita
+ Error verifying geometry column %1
- Virhe tarkistettaessa geometriasaraketta %1
+ Virhe tarkistettaessa geometriasaraketta %1
+ Unknown geometry type
- Tuntematon geometria tyyppi
+ Tuntematon geometria tyyppi
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- Sarakkeessa %1 on geometriatyyppi %2 jota QGIS ei nykyisellään tue.
+ Sarakkeessa %1 on geometriatyyppi %2 jota QGIS ei nykyisellään tue.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- Saraketta %1 ei ole rajoitettu yhteen SRID jota QGIS edellyttää.
+ Saraketta %1 ei ole rajoitettu yhteen SRID jota QGIS edellyttää.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Koska QGIS tukee vain tasomaisia tietoja, SQL Anywhere palveluntarjoaja muuntaa tiedot yhteensopivaan tasomainen projektio (SRID=%1).
+ Koska QGIS tukee vain tasomaisia tietoja, SQL Anywhere palveluntarjoaja muuntaa tiedot yhteensopivaan tasomainen projektio (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Koska QGIS tukee vain tasomaisia tietoja eikä yhteensopivaa tasomaista projektiota löytynyt, SQL Anywhere palveluntarjoaja yrittää muuntaa tiedot tasomaiseen WGS84 muotoon(SRID=%1).
+ Koska QGIS tukee vain tasomaisia tietoja eikä yhteensopivaa tasomaista projektiota löytynyt, SQL Anywhere palveluntarjoaja yrittää muuntaa tiedot tasomaiseen WGS84 muotoon(SRID=%1).
+ Mixed Spatial Reference Systems
- Sekoitettu Spatial Reference Systems
+ Sekoitettu Spatial Reference Systems
+ Error checking database ReadOnly property
- Virhe tarkistettaessa tietokannan ReadOnly (ainoastaan luku) ominaisuutta
+ Virhe tarkistettaessa tietokannan ReadOnly (ainoastaan luku) ominaisuutta
+ Error loading SRS definition
- Virhe ladattaessa SRS määritystä
+ Virhe ladattaessa SRS määritystä
+ Limited Support of Round Earth SRS
- Rajoitettu tuki Round Earth SRS
+ Rajoitettu tuki Round Earth SRS
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- Sarake %1 (%2) sisältää geometrioita jotka kuuluvat pyöreän maapallon sijaintiviitejärjestelmään (SRID =%3). %4
+ Sarake %1 (%2) sisältää geometrioita jotka kuuluvat pyöreän maapallon sijaintiviitejärjestelmään (SRID =%3). %4
Päivitykset geometria-arvoihin estetään, ja kyselyiden tehokkuus voi olla heikko koska spatiaalisia indeksejä ei käytetä. Tehokkuuden parantamiseksi harkitse onko uusi spatiaalisen indeksin sarake mahdollinen (mahdollisesti laskennallinen) joka sisältäisi tasomaisen projektion näistä geometrioista. Avuksi voit käyttää SQL Anywhere dokumentaatiosta kuvauksia ST_SRID(INT) ja ST_Transform(INT) metoodeista.
@@ -48282,14 +47967,14 @@ Päivitykset geometria-arvoihin estetään, ja kyselyiden tehokkuus voi olla hei
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Symboli jolla nimi "%1" on jo olemassa.
Ylikirjoitetaanko?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Väritys jolla nimi "%1" on jo olemassa.
Ylikirjoitetaanko?
@@ -49421,7 +49106,7 @@ Symbolien tietokannassa oli ongelma.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50197,37 +49882,25 @@ Virhe oli:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- VALMIS: %n ominaisuustieto poistettiin.
- VALMIS: %n ominaisuustietoa poistettiin.
-
+ VALMIS: %n ominaisuustieto poistettiin. VALMIS: %n ominaisuustietoa poistettiin.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- VIRHE:%n ominaisuustietoa ei poistettu.
- VIRHE: %n ominaisuustietoa ei poistettu.
-
+ VIRHE:%n ominaisuustietoa ei poistettu. VIRHE: %n ominaisuustietoa ei poistettu.
SUCCESS: %n attribute(s) added.
added attributes count
-
- VALMIS: %n ominaisuustietoa lisätty.
- VALMIS: %n ominaisuustietoa lisättiin.
-
+ VALMIS: %n ominaisuustietoa lisätty. VALMIS: %n ominaisuustietoa lisättiin.
ERROR: %n new attribute(s) not added
not added attributes count
-
- VIRHE: %n ominaisuustietoa ei lisätty
- VIRHE: %n ominaisuustietoja ei lisätty
-
+ VIRHE: %n ominaisuustietoa ei lisätty VIRHE: %n ominaisuustietoja ei lisätty
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- VALMIS: %n ominaisuustiedon arvo muuttui.
- VALMIS: %n ominaisuustitojen arvot muuttuivat.
-
+ VALMIS: %n ominaisuustiedon arvo muuttui. VALMIS: %n ominaisuustitojen arvot muuttuivat.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- VIRHE: %n ominaisuustiedon arvoa ei muutettu.
- VIRHE: %n ominaisuustietojen arvoja ei muutettu.
-
+ VIRHE: %n ominaisuustiedon arvoa ei muutettu. VIRHE: %n ominaisuustietojen arvoja ei muutettu.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- VALMIS: %n kohde poistettiin.
- VALMIS: %n kohdetta poistettiin.
-
+ VALMIS: %n kohde poistettiin. VALMIS: %n kohdetta poistettiin.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- VIRHE: kohdetta ei poistettu.
- VIRHE: %n kohdetta ei poistettu.
-
+ VIRHE: kohdetta ei poistettu. VIRHE: %n kohdetta ei poistettu.
SUCCESS: %n feature(s) added.
added features count
-
- VALMIS: %n kohde lisättiin.
- VALMIS: %n kohdetta lisättiin.
-
+ VALMIS: %n kohde lisättiin. VALMIS: %n kohdetta lisättiin.
ERROR: %n feature(s) not added.
not added features count
-
- VIRHE: %n kohdetta ei lisätty.
- VIRHE: %n kohdetta ei lisätty.
-
+ VIRHE: %n kohdetta ei lisätty. VIRHE: %n kohdetta ei lisätty.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- VIRHE: %n kohdetta ei lisätty - palveluntarjoaja ei tue tietojen lisäämistä.
- VIRHE: %n kohdetta ei lisätty - palveluntarjoaja ei tue tietojen lisäämistä.
-
+ VIRHE: %n kohdetta ei lisätty - palveluntarjoaja ei tue tietojen lisäämistä. VIRHE: %n kohdetta ei lisätty - palveluntarjoaja ei tue tietojen lisäämistä.
SUCCESS: %n geometries were changed.
changed geometries count
-
- VALMIS: %n geometria muutettiin.
- VALMIS: %n geometriaa muutettiin.
-
+ VALMIS: %n geometria muutettiin. VALMIS: %n geometriaa muutettiin.
ERROR: %n geometries not changed.
not changed geometries count
-
- VIRHE: %n geometriaa ei muutettu.
- VIRHE: %n geometrioita ei muutettu.
-
+ VIRHE: %n geometriaa ei muutettu. VIRHE: %n geometrioita ei muutettu.
Options (%n coordinate reference systems available)
crs count
-
- Vaihtoehdot (%n koordinaattijärjestelmä käytettävissä)
- Vaihtoehdot (%n koordinaattijärjestelmää käytettävissä)
-
+ Vaihtoehdot (%n koordinaattijärjestelmä käytettävissä) Vaihtoehdot (%n koordinaattijärjestelmää käytettävissä)
Coordinate Reference System (%n available)
crs count
-
- Koordinaattijärjestelmä (%n vapaana)
- Koordinaattijärjestelmä (%n vapaana)
-
+ Koordinaattijärjestelmä (%n vapaana) Koordinaattijärjestelmä (%n vapaana)
%n Layer(s) selected
selected layer count
-
- %n Taso valittu
- %n Tasoa valittu
-
+ %n Taso valittu %n Tasoa valittu
(and %n more)
crs
-
- (ja %n lisää)
- (ja %n lisää)
-
+ (ja %n lisää) (ja %n lisää)
%n tile requests in background
tile request count
-
- %n kuvakepyyntö taustalla
- %n kuvakepyyntöä taustalla
-
+ %n kuvakepyyntö taustalla %n kuvakepyyntöä taustalla
, %n cache hits
tile cache hits
-
- , %n välimuisti osumia
- , %n välimuisti osumia
-
+ , %n välimuisti osumia , %n välimuisti osumia
, %n cache misses.
tile cache missed
-
- , %n välimuistiin ei osumaa.
- , %n välimuistiin ei osumaa.
-
+ , %n välimuistiin ei osumaa. , %n välimuistiin ei osumaa.
, %n errors.
errors
-
- , %n virhe.
- , %n virhettä.
-
+ , %n virhe. , %n virhettä.
(and %n more)
crs
-
- (ja %n lisää)
- (ja %n lisää)
-
+ (ja %n lisää) (ja %n lisää)
%n missing row(s)
-
- %n puuttuva rivi
- %n puuttuvaaa riviä
-
+ %n puuttuva rivi %n puuttuvaaa riviä
%n missing column(s)
-
- %n puuttuva sarake
- %n puuttuvaa saraketta
-
+ %n puuttuva sarake %n puuttuvaa saraketta
%n tile requests in background
tile request count
-
- %n kuvakepyyntö taustalla
- %n kuvakepyyntöä taustalla
-
+ %n kuvakepyyntö taustalla %n kuvakepyyntöä taustalla
, %n cache hits
tile cache hits
-
- , %n välimuisti osumia
- , %n välimuisti osumia
-
+ , %n välimuisti osumia , %n välimuisti osumia
, %n cache misses.
tile cache missed
-
- , %n välimuistiin ei osumaa.
- , %n välimuistiin ei osumaa.
-
+ , %n välimuistiin ei osumaa. , %n välimuistiin ei osumaa.
, %n errors.
errors
-
- , %n virhe.
- , %n virhettä.
-
+ , %n virhe. , %n virhettä.
SaDbTableModel
+ Schema
- Skeema
+ Skeema
+ Table
- Taulu
+ Taulu
+ Type
- Tyyppi
+ Tyyppi
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Viivan tulkinta
+ Viivan tulkinta
+ Geometry column
- Geometriasarake
+ Geometriasarake
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Tallenna yhteys
+ Tallenna yhteys
+ Should the existing connection %1 be overwritten?
- Tuleeko olemassa oleva yhteys %1 ylikirjoittaa?
+ Tuleeko olemassa oleva yhteys %1 ylikirjoittaa?
+ Failed to load interface
- Rajapinnan lataus epäonnistui
+ Rajapinnan lataus epäonnistui
+ Test connection
- Testaa yhteyttä
+ Testaa yhteyttä
+ Connection to %1 was successful
- Yhdistäminen kohteeseen %1 onnistui
+ Yhdistäminen kohteeseen %1 onnistui
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Yhteys epäonnistui. Tarkista asetukset ja yritä uudelleen.
+ Yhteys epäonnistui. Tarkista asetukset ja yritä uudelleen.
SQL Anywhere virhekoodi: %1
Kuvaus: %2
@@ -53630,276 +53245,348 @@ Kuvaus: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Luo uusi SQL Anywhere yhteys
+ Luo uusi SQL Anywhere yhteys
+ Connection Information
- Yhteystiedot
+ Yhteystiedot
+ Name
- Nimi
+ Nimi
+ Host
- Isäntä
+ Isäntä
+ Port
- Portti
+ Portti
+ Server
- Palvelin
+ Palvelin
+ Database
- Tietokanta
+ Tietokanta
+ Connection Parameters
- Yhteyden parametrit
+ Yhteyden parametrit
+ Username
- Käyttäjänimi
+ Käyttäjänimi
+ Password
- Salasana
+ Salasana
+ Name of the new connection
- Uuden yhteyden nimi
+ Uuden yhteyden nimi
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Nimi tai IP osoite tietokoneelle joka toimii tietokantapalvelimena (jätä tyhjäksi paikallisella yhteydellä)
+ Nimi tai IP osoite tietokoneelle joka toimii tietokantapalvelimena (jätä tyhjäksi paikallisella yhteydellä)
+ Port number used by the database server (leave blank for default 2638)
- Tietokantapavelimen portin numero (jätä tyhjäksi oletusarvolle 2638)
+ Tietokantapavelimen portin numero (jätä tyhjäksi oletusarvolle 2638)
+ Name of the database server (leave blank for default server on host)
- Tietokantapalvelimen nimi (jätä tyhjäksi oletuspalvelimelle isännässä)
+ Tietokantapalvelimen nimi (jätä tyhjäksi oletuspalvelimelle isännässä)
+ Name of the database (leave blank for default database on server)
- Tietokannan nimi (jätä tyhjäksi palvelimen oletustietokannalle)
+ Tietokannan nimi (jätä tyhjäksi palvelimen oletustietokannalle)
+ Additional connection parameters
- Yhteyden lisäparametrit
+ Yhteyden lisäparametrit
+ Database username
- Tietokannan käyttäjänimi
+ Tietokannan käyttäjänimi
+ Database password
- Tietokannan salasana
+ Tietokannan salasana
+ Save the connection username in the registry
- Tallenna yhteyden käyttäjätunnus rekisteriin
+ Tallenna yhteyden käyttäjätunnus rekisteriin
+ Save Username
- Tallenna käyttäjänimi
+ Tallenna käyttäjänimi
+ &Test Connect
- &Testaa yhteys
+ &Testaa yhteys
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Tallenna yhteyden salasana rekisteriin (VAROITUS: EI TURVALLISTA)
+ Tallenna yhteyden salasana rekisteriin (VAROITUS: EI TURVALLISTA)
+ Save Password
- Tallenna salasana
+ Tallenna salasana
+ Encrypt packets using simple encryption
- Salaa paketit käyttäen yksinkertaista salausta
+ Salaa paketit käyttäen yksinkertaista salausta
+ Simple Encryption
- Yksinkertainen Salaus
+ Yksinkertainen Salaus
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Käytä arvioita tiettyistä taso-ominaisuuksista kuten kardinaliteetti, laajuus, jne. (parantaa suorituskykyä)
+ Käytä arvioita tiettyistä taso-ominaisuuksista kuten kardinaliteetti, laajuus, jne. (parantaa suorituskykyä)
+ Estimate table metadata
- Arvioi taulun metadata
+ Arvioi taulun metadata
+ Search for geometry columns in tables owned by other users
- Etsi muiden käyttäjien omistamien taulujen geometria sarakkeita
+ Etsi muiden käyttäjien omistamien taulujen geometria sarakkeita
+ Search other users' tables
- Etsi toisten käyttäjien tauluja
+ Etsi toisten käyttäjien tauluja
SaSourceSelect
+ &Add
- &Lisää
+ &Lisää
+ &Set Filter
- &Aseta suodatin
+ &Aseta suodatin
+ Wildcard
- Vastike
+ Vastike
+ RegExp
- RegExp
+ RegExp
+ All
- Kaikki
+ Kaikki
+ Schema
- Skeema
+ Skeema
+ Table
- Taulukko
+ Taulukko
+ Type
- Tyyppi
+ Tyyppi
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Viivatulkinta
+ Viivatulkinta
+ Geometry column
- Geometriasarake
+ Geometriasarake
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Oletko varma että haluat poistaa yhteyden %1 ja kaikki siihen liittyvät asetukset?
+ Oletko varma että haluat poistaa yhteyden %1 ja kaikki siihen liittyvät asetukset?
+ Confirm Delete
- Vahvista poisto
+ Vahvista poisto
+ Select Table
- Valitse taulukko
+ Valitse taulukko
+ You must select a table in order to add a layer.
- Sinun täytyy valita taulukko lisätäksesi tason.
+ Sinun täytyy valita taulukko lisätäksesi tason.
+ Failed to load interface
- Liitynnän lataaminen epäonistui
+ Liitynnän lataaminen epäonistui
+ Connection failed
- Yhteys epäonnistui
+ Yhteys epäonnistui
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Yhteys tietokantaan %1 epäonnistui. Tarkista asetukset ja yritä uudelleen.
+ Yhteys tietokantaan %1 epäonnistui. Tarkista asetukset ja yritä uudelleen.
SQL Anywhere virhekoodi: %2
Kuvaus: %3
+ No accessible tables found
- Käytettäviä tauluja ei löytynyt
+ Käytettäviä tauluja ei löytynyt
+ Database connection was successful, but no tables containing geometry columns were %1.
- Tietokantayhteys onnistui, mutta ei löytynyt yhtään taulua jossa geometriasarakeet olisivat %1.
+ Tietokantayhteys onnistui, mutta ei löytynyt yhtään taulua jossa geometriasarakeet olisivat %1.
+ found
- löytyi
+ löytyi
+ found in your schema
- löytyi skeemastasi
+ löytyi skeemastasi
SaSourceSelectBase
+ Add SQL Anywhere layer
- Lisää SQL Anywhere taso
+ Lisää SQL Anywhere taso
+ SQL Anywhere Connections
- SQL Anywhere yhteydet
+ SQL Anywhere yhteydet
+ Delete
- Poista
+ Poista
+ Edit
- Muokkaa
+ Muokkaa
+ New
- Uusi
+ Uusi
+ Connect
- Yhdistä
+ Yhdistä
+ Search options
- Haku asetukset
+ Haku asetukset
+ Search
- Etsi
+ Etsi
+ Search mode
- Hakutapa
+ Hakutapa
+ Search in columns
- Etsi sarakkeista
+ Etsi sarakkeista
SaveAsPythonScriptAction
I/O error
- I/O virhe
+ I/O virhe
Unable to save edits. Reason:
%s
- Muokkausta ei voida tallentaa. Syy:
+ Muokkausta ei voida tallentaa. Syy:
%s
@@ -54234,20 +53921,24 @@ Kuvaus: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Lisää SQL Anywhere taso ...
+ Lisää SQL Anywhere taso ...
+ Store vector layers within a SQL Anywhere database
- Tallenna vektoritasot SQL Anywhere tietokantaan
+ Tallenna vektoritasot SQL Anywhere tietokantaan
+ Invalid Layer
- Virheellinen tasoViallinen taso
+ Virheellinen tasoViallinen taso
+ %1 is an invalid layer and cannot be loaded.
- %1 taso on viallinen eikä sitä ladata.
+ %1 taso on viallinen eikä sitä ladata.
@@ -55585,7 +55276,7 @@ Suorita topologian tarkistus uudelleen.
context_help
- <h3>Database connection</h3>
<h3>Tietokantayhteys</h3>
@@ -55798,7 +55489,7 @@ Kasvava rivien ja sarakkeiden määrä vähentää solun kokoa ja kasvattaa tulo
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55808,7 +55499,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55868,7 +55559,7 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
<h3>Käyttäjän määrittelemän koordinaattijärjestelmän (CRS) määritelmän kuvaus</h3>
@@ -55904,7 +55595,7 @@ Käyttäjän määrittelemän CRS QGIS ohjelmassa edellyttää hyvää ymmärtä
<table>
<tr>
<td>
- <p align='justify'>
+ <p align='justify'>
The QGIS Python Console is an interactive shell for the python command executions.
It also has a python file editor that allows you to edit and save your python scripts.
Both console and editor are based on PyQScintilla2 package.<br>
@@ -55960,7 +55651,7 @@ Käyttäjän määrittelemän CRS QGIS ohjelmassa edellyttää hyvää ymmärtä
</tr>
</table>
<b><i>Toolbar:</i></b>
- <table width="100%" id='toolbarConsole'>
+ <table width="100%" id='toolbarConsole'>
<tr>
<td><img src="qrc:/images/themes/default/console/iconClearConsole.png" /></td>
<td colspan="2">Clear python console</td>
@@ -56055,8 +55746,8 @@ that will be automatically deleted after running.</li>
<br>
<li><label>Using prepared APIs file:</label> If checked the *.pap file will be used for code completion. To generate a prepared APIs file you have to load least an *.api file and then compile it by clicking on <label>Compile Apis...</label> button.</li>
</ul>
-<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
- <b>Note:</b> To save the state of console's widgets you have to close the Python Console
+<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
+ <b>Note:</b> To save the state of console's widgets you have to close the Python Console
from the close button. This allows you to save the geometry to be restored to the next start.
</p>
@@ -56251,7 +55942,7 @@ This dialog allows you to define the settings for a connection to a Oracle datab
<li> <label>Only look in meta data table</label> Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.
-<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
+<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56266,7 +55957,7 @@ the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied. The table
geometry is determined from the first 100 non-null geometry rows in the table.
<li> <label>Only existing geometry types</label> Only list the existing
-geometry types and don't offer to add others.
+geometry types and don't offer to add others.
</ul>
@@ -56447,10 +56138,10 @@ The field calculator allows you to update fields with expressions.
</td>
<td>value of field <tt>column_name</tt></td>
</tr>
-<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
+<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
<tr><td><tt>number</tt></td><td>number</td></tr>
<tr><td>NULL</td><td>null value</td></tr>
-<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
+<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
<tr><td>ln(<tt>a</tt>)</td><td>natural log (i.e. base e) of <tt>a</tt></td></tr>
<tr><td>log10(<tt>a</tt>)</td><td>log base 10 of <tt>a</tt></td></tr>
<tr><td>log(<tt>a</tt>,<tt>b</tt>)</td><td>log base <tt>b</tt> of <tt>a</tt></td></tr>
@@ -56576,8 +56267,8 @@ Draws a scale bar on the map.
<p>
You can control the style and placement, as well as the labeling of the bar.
QGIS only supports displaying the scale in the same units as your map frame. So
-if the units of your layers are in meters, you can't create a scale bar in
-feet. Likewise if you are using decimal degrees, you can't create a scale bar
+if the units of your layers are in meters, you can't create a scale bar in
+feet. Likewise if you are using decimal degrees, you can't create a scale bar
to display distance in meters.</p> <p>
To add a scale bar:
<ol>
@@ -56636,7 +56327,7 @@ This dialog allows you to define the settings for a connection to a PostgreSQL d
<li> <label>Only look in the geometry_columns table</label> Indicates that only "listed" geometry columns should be used - opposed to scanning all tables for geometry columns.
-<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
+<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56898,8 +56589,8 @@ To avoid digitizing all vertices of the common boundary select <label>Avoi
<a name="crs">
<h4>Coordinate Reference System (CRS) Tab</h4>
</a>
-The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
-<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
+The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
+<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
<p>You can find a coordinate system by entering its name, EPSG code or the QGIS ID and clicking the <label>Find</label> button.
<p>The list of recently used coordinate systems will be available on the bottom for quick access.
@@ -57203,7 +56894,7 @@ Päivittäksesi kirjanmerkin alueen laajuutta, klikkaa sitä ja sitten klikkaa &
<p><label>Topology tolerance</label> - the distance in units of the project. If the distance of two points falls short the topological tolerance, they are considered to be the vertex. A topological tolerance value greater than zero slows down the plugin, but you can use not ideal data sources.</p>
<h5>Note</h5>
-<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
+<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
<a name="LayerSettings">
<h4>Transport layer settings</h4>
@@ -57343,6 +57034,7 @@ Nämä käsitellään yleisesti paljon nopeammin kuin QGIS:n yleiset lausekkeet,
+ <h3>Create a New SQL Anywhere Connection</h3>
This dialog allows you to define the settings for a connection to a
SQL Anywhere database.
@@ -57371,11 +57063,11 @@ SQL Anywhere database.
<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
-<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
</ul>
- <h3>Luo uusi SQL Anywhere yhteys</h3>
+ <h3>Luo uusi SQL Anywhere yhteys</h3>
Tässä valintaikkunassa voit määritellä asetukset yhteydelle
SQL Anywhere tietokantaan.
<p>
@@ -57415,7 +57107,7 @@ SQL Anywhere tietokantaan.
The open vector layer dialog is used to add vector data to the QGIS map view. Vector data are spatial data described using geometries of points, lines and polygons (enclosed areas).</p>
QGIS supports vector data in a number of formats, including those supported by the OGR library data provider plugin, such as ESRI shape files, MapInfo MIF (interchange format) and MapInfo TAB (native format).</p>
QGIS supports PostGIS layers in a PostgreSQL database and SpatiaLite layers. Support for additional data types (eg. delimited text) is provided by additional data provider plugins. A list of OGR supported vector formats can be found in Appendix A.1 of the User Guide.</p>
-Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
+Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
<h3>Lisää vektoritaso valintaikkuna</h3>
@@ -57504,10 +57196,10 @@ It is possible to check how often QGIS will download the list and update informa
from the available repositories.
</p>
<p>
-By checking the 'Show experimental plugins' checkbox, all plugins will be shown
-in the lists, even the ones that are considered 'experimental' by the author.
+By checking the 'Show experimental plugins' checkbox, all plugins will be shown
+in the lists, even the ones that are considered 'experimental' by the author.
-<table border=1 width='95%' align='center'><tr><td>
+<table border=1 width='95%' align='center'><tr><td>
Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
</td></tr></table>
@@ -57662,7 +57354,7 @@ Define placement algorithm for labels. Choose between <label>central point
In the <label>Digitizing</label> tab you can define settings for digitizing line width and color.
<h5>Snapping</h5>
Here you can define a general, project wide snapping tolerance. <p>
-You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
+You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
A layer based snapping tolerance can be defined by choosing <label>Settings</label> (or <label>File</label>) > <label>Project Properties...</label>. In the <label>General</label> tab, section <label>Digitize</label> you can click on <label>Snapping options...</label> to enable and adjust snapping mode and tolerance on a layer basis.
<h5>Vertex markers</h5>
You can define marker style as <label>Semi transparent circle</label>, <label>Cross</label> or <label>None</label> and size; you can also set showing markers only for selected features.
@@ -57716,6 +57408,7 @@ Voit määritellä myös uuden attribuuttisarakkeen leveyden ja tarkuuden.
Tässä osassa näet luettelon attribuuteista. Poistaaksesi yhden, klikkaa sitä ja valitse <label>Poista ominaisuustieto</label> näppäin.
+ <h3>Add SQL Anywhere Tables</h3>
This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
<p>
@@ -57754,7 +57447,7 @@ To filter a layer before adding it to the map, either double click on its name o
</a>
Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
- <h3>Lisää SQL Anywhere tauluja</h3>
+ <h3>Lisää SQL Anywhere tauluja</h3>
Tässä valintaikkunassa voit lisätä SQL Anywhere tasoja (tauluja joissa geometriasarake) QGIS karttapohjalle.
<p>
<a href="#connect">Yhteydet</a><br/>
@@ -57935,7 +57628,7 @@ It is safer to use an explicit coding if the QGIS project needs to be portable.
or degrees/minutes. QGIS is quite permissive in its interpretation of degrees/minutes/seconds.
A valid DMS coordinate will contain three numeric fields with an optional hemisphere prefix or suffix
(N, E, or + are positive, S, W, or - are negative). Additional non numeric characters are
- generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
+ generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
</li>
</ul>
<p>For well known text geometry the following options apply:</p>
@@ -57985,8 +57678,8 @@ are escaped.</p>
(that is, to stop it being treated as a new line, delimiter, or quote character).
</p>
<p>Escape characters that are also quote characters have much more limited effect. They only apply within quotes and only escape themselves. For example, if
-<tt>'</tt> is a quote and escape character, then the string
-<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
+<tt>'</tt> is a quote and escape character, then the string
+<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
</p>
@@ -58775,7 +58468,7 @@ Avun saamiseksi lähetä email scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -59543,7 +59236,7 @@ Liitännäistä ei voi käyttää.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -59559,9 +59252,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
<h3>week() funktio</h3>
@@ -59586,7 +59279,7 @@ Erottelee viikon numeron päiväyksestä, viikkojen määrän
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -59611,7 +59304,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
@@ -59646,7 +59339,7 @@ Ehdollinen lauseke jota voidaan käyttää useiden lausekkeiden ratkaisemiseksi
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -59660,7 +59353,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
<h3>right() funktio</h3>
@@ -59681,7 +59374,7 @@ Palauttaa osamerkkijoukon joka sisältää <i>n</i> oikean puolimmai
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -59691,7 +59384,7 @@ Tämä ryhmä sisältää funktiot värien käsittelyyn
- <h3>length() function</h3>
Returns the length of a string.
@@ -59704,7 +59397,7 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
<h3>length() funktio</h3>
Palauttaa merkkijonon pituuden.
@@ -59722,7 +59415,7 @@ Palauttaa merkkijonon pituuden.
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -59735,7 +59428,7 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
<h3>upper() funktio</h3>
Muuntaa merkkijonon isoiksi kirjaimiksi.
@@ -59753,9 +59446,9 @@ Muuntaa merkkijonon isoiksi kirjaimiksi.
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -59765,8 +59458,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
<h3>bbox funktio</h3>
Palauttaa 1 jos geometriat alueellisesti leikkaavat määritellyn rajauslaatikon ja 0 jos ne eivät leikkaa.
@@ -59784,7 +59477,7 @@ b → geometry
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -59798,7 +59491,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
<h3>left() funktio</h3>
@@ -59819,7 +59512,7 @@ Palauttaa osamerkkijoukon joka sisältää <i>n</i> vasemmanpuoleisi
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -59848,7 +59541,7 @@ Huomautus: Tämä funktio on käytettävissä ainoastaan joissakin yhteyksissä,
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -59881,9 +59574,9 @@ Pyöristää numeron ylöspäin.
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -59894,7 +59587,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
<h3>toreal() funktio</h3>
Muuntaa merkkijonon liukuluvuksi (real). Mikään ei muutu jos arvoa ei voida muuntaa (esim '123.56asd' on virheellinen). Numerot pyöristetään muutosten tallennuksen jälkeen jos tarkkuus on pienempi kuin muunnoksen tulos.
@@ -59912,7 +59605,7 @@ Muuntaa merkkijonon liukuluvuksi (real). Mikään ei muutu jos arvoa ei voida mu
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -59939,7 +59632,7 @@ Palauttaa nykyisen ominaisuuden x koordinaatine
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -59968,14 +59661,14 @@ Ei mitään
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -59984,8 +59677,8 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
<h3>strpos() funktio</h3>
Palauttaa säännöllisen lausekkeen indeksin merkkijonosta..
@@ -60007,7 +59700,7 @@ Palauttaa -1 jos lauseketta ei löydy.
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -60044,7 +59737,7 @@ Tämä funktio tarvitsee kaksi argumettia.
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -60080,7 +59773,7 @@ Ei mitään
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -60113,7 +59806,7 @@ Ei mitään
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60142,7 +59835,7 @@ geom → geometria
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -60174,7 +59867,7 @@ Pyöristää numeron alaspäin.
<code>floor(-4.9) → -5</code><br
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60203,9 +59896,9 @@ geom → geometria
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -60216,7 +59909,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
<h3>toint() funktio</h3>
Muuntaa merkkijonon kokonaisluvuksi. Mitään ei muuteta jos arvoa ei voida muuntaa kokonaisluvuksi. (esim. '123asd' on virheellinen).
@@ -60234,7 +59927,7 @@ Muuntaa merkkijonon kokonaisluvuksi. Mitään ei muuteta jos arvoa ei voida muun
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -60261,7 +59954,7 @@ Hakee nykyisen ominaisuuden y koordinaatin
- <h3>tostring() function</h3>
Converts a number to string.
@@ -60274,7 +59967,7 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
<h3>tostring() funktio</h3>
Muuntaa numeron merkkijonoksi.
@@ -60292,7 +59985,7 @@ Muuntaa numeron merkkijonoksi.
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -60321,7 +60014,7 @@ Ei mitään
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -60354,7 +60047,7 @@ etumerkkejä tuloksen neljänneksen päättelyyn.
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -60383,7 +60076,7 @@ Palauttaa kulman sinin.
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -60399,9 +60092,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
<h3>month() funktio</h3>
@@ -60455,7 +60148,7 @@ Ei mitään
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -60471,9 +60164,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
<h3>day() funktio</h3>
@@ -60498,12 +60191,12 @@ Poimii päivän päiväyksestä, tai päivien lukumäärän
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -60527,7 +60220,7 @@ Muuntaa merkkijonon Qt päivämäärä tyyppiin.
<code>todate('2012-05-04') → 2012-05-04</code><br>
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60544,7 +60237,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
<h3>lpad() funktio</h3>
Palauttaa merkkijonon annetulle pituudella
@@ -60565,7 +60258,7 @@ joka on täytetty käyttäen täyttömerkkiä.
<code>lpad('Hello', 10, 'x') → 'xxxxxHello'</code><br
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -60594,14 +60287,14 @@ Palauttaa arvosta arcus kosinin radiaaneissa.
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60616,7 +60309,7 @@ WFS tason kenttien arvojen lataamista ei ole tuettu, ennenkuin taso on todella l
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -60653,7 +60346,7 @@ Tämä funktio tarvitsee kaksi argumenttia.
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -60662,14 +60355,14 @@ Tämä ryhmä sisältää funktiot joilla operoidaan geometria objekteja kuten p
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60683,7 +60376,7 @@ WFS tason kenttien arvojen lataamista ei ole tuettu, ennenkuin taso on todella l
</p>
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -60712,7 +60405,7 @@ Ei mitään
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -60741,7 +60434,7 @@ Palauttaa arvon eksopentin.
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60758,7 +60451,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
<h3>rpad() funktio</h3>
@@ -60780,7 +60473,7 @@ joka on täytetty käyttäen täyttömerkkiä.
<code>rpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -60826,7 +60519,7 @@ use <code>round(decimal)</code> pyöristetään lähimpään kokonai
- <h3>$now function</h3>
Returns the current date and time
@@ -60855,7 +60548,7 @@ Ei mitään
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -60870,7 +60563,7 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
<h3>color_hsl() funktio</h3>
Palauttaa väriä esittävän merkkijono, perustuen värin sävyn, kylläisyyden ja valosuuden attribuutteihin
@@ -60890,7 +60583,7 @@ Palauttaa väriä esittävän merkkijono, perustuen värin sävyn, kylläisyyden
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -60903,8 +60596,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -60948,7 +60641,7 @@ Muuntaa annetun arvon syötettävältä alueelta tulosaluelle käyttäen ekspone
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -60960,7 +60653,7 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
<h3>convexHull funktio</h3>
Palauttaa geometrian konveksin peitteen. Tulos edustaa geometrian pienintä peitettä joka sisältää kaikki joukkoon kuuluvat siihen kuuluvat geometriat.
@@ -60977,7 +60670,7 @@ b → geometry
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -60989,7 +60682,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
<h3>union funktio</h3>
Palauttaa geometrian joka esittää pistejoukon geometrioiden unionia..
@@ -61006,7 +60699,7 @@ b → geometry
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61035,7 +60728,7 @@ geom → geometria
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61064,7 +60757,7 @@ geom → geometria
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61093,7 +60786,7 @@ geom → geometria
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -61105,8 +60798,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>contains funktio</h3>
Palauttaa true jos ja ainoastaan jos yhtään b:n pistettä ei ole a:n ulkopuolella, ja vähintään yksi b:sisällä oleva piste on a:n sisällä.
@@ -61124,7 +60817,7 @@ geometry → geometry
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -61139,8 +60832,8 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
<h3>wordwrap() funktio</h3>
Palauttaa merkkijonon rivitettynä maksimi/minimi merkkien määrään.
@@ -61161,7 +60854,7 @@ Palauttaa merkkijonon rivitettynä maksimi/minimi merkkien määrään.
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -61177,7 +60870,7 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
<h3>color_rgb() funktio</h3>
@@ -61197,7 +60890,7 @@ Palauttaa merkkijono joka edustaa väriä perustuen sen punainen, vihreä ja sin
color_rgb(255,127,0) → '255,127,0'</p
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -61214,7 +60907,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
<h3>color_cmyk() funktio</h3>
@@ -61235,7 +60928,7 @@ Palauttaa merkkijono joka edustaa väri perustuen sen syaani, purppura, keltaine
color_cmyk(100,50,0,10) → '0,115,230'</p
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -61247,7 +60940,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
<h3>intersection funktio</h3>
Palauttaa geometrian, joka edustaa yhteistä geometria a:n ja geometria b:n osaa.
@@ -61264,7 +60957,7 @@ geometry → geometry
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -61274,12 +60967,12 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
@@ -61309,7 +61002,7 @@ ei ehkä anna odotettuja tuloksia jos siirrät QGIS projektisia .
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -61320,8 +61013,8 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
@@ -61347,7 +61040,7 @@ Ei mitään
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -61362,7 +61055,7 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
<h3>color_hsv() funktio</h3>
Palauttaa merkkijono joka edustaa väriä perustuen sen sävy, kylläisyys ja arvo attribuutteihin
@@ -61382,7 +61075,7 @@ Palauttaa merkkijono joka edustaa väriä perustuen sen sävy, kylläisyys ja ar
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -61393,9 +61086,9 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
<h3>ILIKE lauseke</h3>
Palauttaa 1 jos ensimmäinen parametri kohdistuu merkkien koosta riippumatta annettuun rakenteeseen. LIKE voidaan käyttää ILIKE sijasta vertailun tekemiseksi merkkiriippivaiseksi.. Toimii myös numeroilla.
@@ -61413,7 +61106,7 @@ Ei mitään
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -61424,9 +61117,9 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
<h3>LIKE lauseke</h3>
Palauttaa 1 jos ensimmäinen parametri kohdistuu annettuun rakenteeseen. Toimii myös numeroilla.
@@ -61444,7 +61137,7 @@ Ei mitään
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61472,7 +61165,7 @@ geom → geometria
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -61483,7 +61176,7 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
<h3>geomFromGML funktio</h3>
@@ -61501,7 +61194,7 @@ text → GML esityksen mukainen geometria
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -61510,7 +61203,7 @@ Tämä ryhmä sisältää funktiot joilla käsitellään päiväystä ja aika da
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -61522,8 +61215,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
<h3>combine funktio</h3>
Palauttaa geometria a:n ja geometria b:n yhdistelmän.
@@ -61541,9 +61234,9 @@ geometry → geometry
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -61553,8 +61246,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>intersects funktio</h3>
Palauttaa 1 jos geometriat leikkaavat tilassa (jakavat tilassa minkä tahansa pisteen) ja 0 jos ne eivät leikkaa lainkaan.
@@ -61572,7 +61265,7 @@ b → geometry
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -61614,7 +61307,7 @@ Rajoittaa syötettävän arvon määritellylle välille..
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -61626,8 +61319,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
<h3>disjoint funktio</h3>
Palauttaa 1 jos geometriat eivät "alueellisesti leikkaa" - jos niillä ei ole lainkaan yhteistä aluetta.
@@ -61645,7 +61338,7 @@ b → geometry
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -61656,7 +61349,7 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
<h3>geomFromWKT funktio</h3>
@@ -61674,7 +61367,7 @@ text → Well-Known Text (WKT) esitys geometriasta
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -61705,43 +61398,7 @@ b → distance for the buffer
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -61770,10 +61427,10 @@ Ei mitään
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -61801,25 +61458,7 @@ Ei mitään
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -61831,8 +61470,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>crosses funktio</h3>
Palauttaa 1 jos annetuilla geometrioilla on joitakin muttei kaikkia yhteisiä pisteitä.
@@ -61850,7 +61489,7 @@ geometry → geometry
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -61877,7 +61516,7 @@ a → geometry
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -61889,8 +61528,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>touches funktio</h3>
Palauttaa 1 jos geometrioilla on vähintäin yksi yhteinen piste mutta niiden alueet eivät leikkaa toisiaan.
@@ -61908,7 +61547,7 @@ b → geometry
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -61920,8 +61559,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>overlaps funktio</h3>
Palauttaa 1 jos geometriat jakavat tilan, ovat samaa muotoa ja kokoa mutteivät sisällytä toisiaan kokonaan.
@@ -61939,7 +61578,7 @@ b → geometry
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -61970,7 +61609,7 @@ Ei mitään
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -61998,7 +61637,7 @@ Ei mitään
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -62029,7 +61668,7 @@ Ei mitään
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -62058,7 +61697,7 @@ a → geometry
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -62070,8 +61709,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
<h3>within funktio</h3>
Palauttaa 1 jos geometria a on kokonaan geometria b:n sisällä
@@ -62089,7 +61728,7 @@ geometry → geometry
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -62125,7 +61764,7 @@ $map → "karttapohja (QGIS pääkarttapohjasta)</pre>
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -62137,7 +61776,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
<h3>distance funktio</h3>
Palauttaa minimietäisyyden (perustuen alueelliseen referenssiin) kahden geometrian välillä perustuen projektoituihin yksiköihin.
@@ -62154,7 +61793,7 @@ b → geometry
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -62166,7 +61805,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
<h3>difference funktio</h3>
Palauttaa geometrian joka esittää sitä osaa geometriasta a joka ei leikkaa geometrian b kanssa.
@@ -62183,7 +61822,7 @@ geometry → geometry
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -62194,8 +61833,8 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
@@ -62216,7 +61855,7 @@ Ei mitään
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -62228,7 +61867,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
<h3>symDifference funktio</h3>
Palauttaa geometrian joka edustaa tulosta osien a ja b leikkausta..
@@ -62245,7 +61884,7 @@ geometry → geometry
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -62274,12 +61913,12 @@ Ei mitään
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -62303,7 +61942,7 @@ Muuntaa merkkijonon interval tyyypiksi. Voidaan käyttää ottamaan päiviä, t
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 päivää 2 tuntia') → 2012-05-04T10:00:00</code><br>
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -62319,10 +61958,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
<h3>hour() funktio</h3>
@@ -62347,7 +61986,7 @@ Hakee tunnin joko datetime tai time muodosta, tai tuntien lukumäärän <code
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -62363,7 +62002,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
<h3>color_hsla() funktio</h3>
Palauttaa merkkijonon värin esityksestä perustuen sen sävyn, kylläisyyden, vaaleuden ja alfa (läpinäkyvyyden) määritteisiin.
@@ -62384,7 +62023,7 @@ Palauttaa merkkijonon värin esityksestä perustuen sen sävyn, kylläisyyden, v
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -62411,7 +62050,7 @@ Ei mitään
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
@@ -62419,12 +62058,12 @@ This group contains functions that operate on record identifiers.
Tämä ryhmä sisältää toiminnot, jotka toimivat tietuetunnuksilla.
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -62448,7 +62087,7 @@ Muuntaa merkkijonon Qt aika tyyppiiin.
<code>totime('12:30:01') → 12:30:01</code><br>
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -62463,7 +62102,7 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
<h3>replace() funktio</h3>
Palauttaa merkkijonon annetulla merkkijonolla korvattuna..
@@ -62483,7 +62122,7 @@ Palauttaa merkkijonon annetulla merkkijonolla korvattuna..
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
@@ -62492,7 +62131,7 @@ Tämä ryhmä sisältää toiminnot käsitellä ehdollisia tarkastuksia lausekke
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -62520,7 +62159,7 @@ abs(<i>value</i>)<br>
<code>abs(-2) → 2</code><br
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -62551,7 +62190,7 @@ Palauttaa suurimman arvon arvojoukosta.
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -62580,7 +62219,7 @@ Palauttaa arvon neliöjuuren
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
@@ -62589,7 +62228,7 @@ Tämä ryhmä sisältää funktiot joilla operoidaan ehdoilla.
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -62607,7 +62246,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
<h3>color_cmyka() funktio</h3>
@@ -62630,7 +62269,7 @@ Palauttaa merkkijonon joka edustaa väriä perustuen sen syaani, purppura, kelta
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -62667,7 +62306,7 @@ Lyhentää myös luvun annettuun numeroiden lukumäärään.
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -62683,9 +62322,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
<h3>year() funktio</h3>
@@ -62709,7 +62348,7 @@ Erottelee vuosiosan päiväyksestä, tai vuosien lukumäärän <code>Inter
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -62734,7 +62373,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
@@ -62768,7 +62407,7 @@ tuloksen palauttamiseen.
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -62805,7 +62444,7 @@ Tämä funktio tarvitsee kaksi argumenttia.
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -62834,7 +62473,7 @@ geom → geometria
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -62877,7 +62516,7 @@ Muuntaa annetun arvon syötettävästä aineistosta tulosalueelle käyttäen lin
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -62890,7 +62529,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
<h3>trim() funktio</h3>
Poistaa merkkijonosta kaikki tyhjätilamerkit (välilyönti, tab, jne) alusta ja lopusta.
@@ -62908,7 +62547,7 @@ Poistaa merkkijonosta kaikki tyhjätilamerkit (välilyönti, tab, jne) alusta ja
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -62924,10 +62563,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
<h3>minute() funktio</h3>
@@ -62953,7 +62592,7 @@ Erottelee minuutit datetime tai time tiedosta, tai minuuttien lukumäärän
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -62982,9 +62621,9 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
<h3>age() funktio</h3>
@@ -63021,7 +62660,7 @@ käytä <code>day</code> saadaksesi päivien lukumäärän<br>
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -63057,7 +62696,7 @@ Tämä funktio tarvitsee yhden argumentin.
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
@@ -63065,7 +62704,7 @@ This group contains functions to convert on data type to another e.g string to i
Tämä ryhmä sisältää funktot joilla muunnetaan eri datatyyppejä toisiin, esim. merkkijono numeroksi, numero merkkijonoksi.
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -63094,7 +62733,7 @@ Palauttaa kulman kosinin.
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -63102,7 +62741,7 @@ This group contains operators e.g + - *
Tämä ryhmä sisältää operaattorit esim. + - *
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -63118,10 +62757,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
<h3>second() funktio</h3>
@@ -63147,7 +62786,7 @@ Erottelee sekuntit datetime tai time tiedosta, tai sekuntien lukumäärän
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -63176,7 +62815,7 @@ Palauttaa arcustangentin arvon radiaaneina.
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -63203,7 +62842,7 @@ Ei mitään
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -63217,7 +62856,7 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
<h3>title() funktio</h3>
Muuntaa merkkijonon kaikki sanat otsikkomuotoon (kaikki sanat pienistä isoon etukirjaimeen).
@@ -63235,7 +62874,7 @@ Muuntaa merkkijonon kaikki sanat otsikkomuotoon (kaikki sanat pienistä isoon et
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -63249,7 +62888,7 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
<h3>regexp_match() funktio</h3>
Palauttaa toden jos mikä tahansa merkkijonon osa vastaa annettua säännöllistä lauseketta.
@@ -63268,7 +62907,7 @@ Palauttaa toden jos mikä tahansa merkkijonon osa vastaa annettua säännöllist
- <h3>substr() function</h3>
Return a part of a string
@@ -63283,7 +62922,7 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
<h3>substr() funktio</h3>
Palauttaa merkkijonon osan
@@ -63303,12 +62942,12 @@ Palauttaa merkkijonon osan
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -63334,7 +62973,7 @@ Muotilee merkkijonon käyttäen annattuja argumentteja.
<code>format('Tämä %1 esimerkki %2','on', 'testi') → Tämä on esimerkki testi</code><br>
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -63349,7 +62988,7 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
<h3>regexp_replace() funktio</h3>
Palauttaa merkkijonon annetulla säännöllisellä lausekkeella korvattuna.
@@ -63369,7 +63008,7 @@ Palauttaa merkkijonon annetulla säännöllisellä lausekkeella korvattuna.
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -63383,7 +63022,7 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
<h3>regexp_substr() funktio</h3>
Palauttaa merkkijonon sen osan joka vastaa annettua säännöllistä lauseketta.
@@ -63402,7 +63041,7 @@ Palauttaa merkkijonon sen osan joka vastaa annettua säännöllistä lauseketta.
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -63431,7 +63070,7 @@ Ei mitään
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -63448,7 +63087,7 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
<h3>color_rgba() funktio</h3>
Palauttaa merkkijonon värin esityksestä perustuen sen punaisen, vihreän, sinisen ja alfa (läpinäkyvyyden) määritteisiin
@@ -63469,7 +63108,7 @@ Palauttaa merkkijonon värin esityksestä perustuen sen punaisen, vihreän, sini
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -63498,7 +63137,7 @@ Ei mitään
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
@@ -63507,7 +63146,7 @@ Tämä ryhmä sisältää matemaattiset funktiot kuten. neliöjuuren, sinin ja k
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -63538,7 +63177,7 @@ Palauttaa pienimmän arvon arvojoukosta.
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -63549,7 +63188,7 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
<h3>lower() funktio</h3>
Muuntaa merkkijonon pieniiin merkkeihin..
@@ -63565,7 +63204,7 @@ Muuntaa merkkijonon pieniiin merkkeihin..
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -63594,7 +63233,7 @@ Ei mitään
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
@@ -63603,7 +63242,7 @@ Tämä ryhmä sisältää funktiot joilla operoidaan merkkijonoja esim. korvaust
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -63616,7 +63255,7 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
<h3>concat() function</h3>
Kokoaa useita merkkijonoja yhdeksi merkkijonoksi.
@@ -63634,7 +63273,7 @@ Kokoaa useita merkkijonoja yhdeksi merkkijonoksi.
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -63651,8 +63290,8 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
<h3>coalesce() funktio</h3>
@@ -63678,7 +63317,7 @@ tai muuten "fallbackField" arvo tai merkkijono 'ERROR' jos m
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -63707,12 +63346,12 @@ Palauttaa arcussinin arvon radiaaneina.
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -63737,12 +63376,12 @@ Muuntaa merkkijonon Qt data time tyypiksi.
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -63773,14 +63412,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -63799,14 +63438,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -63911,7 +63550,7 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
<h3>format_date() funktio</h3>
Muotoillee tyypin tai merkkijonon räätälöidyksi merkkijonoksi. Käyttää Qt data time muotisia merkkijonoja. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
@@ -64090,7 +63729,7 @@ Muotoillee tyypin tai merkkijonon räätälöidyksi merkkijonoksi. Käyttää Qt
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -64119,7 +63758,7 @@ Palauttaa kulman tangentin.
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -64148,7 +63787,7 @@ Ei mitään
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -64183,7 +63822,7 @@ Tämä funktio tarvitsee yhden argumentin.
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -64199,7 +63838,7 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
<h3>color_hsva() funktio</h3>
Palauttaa merkkijonon värin esityksestä perustuen sen sävyn, kylläisyyden, arvon ja alfa (läpinäkyvyyden) määritteisiin
@@ -66774,4 +66413,4 @@ Palauttaa merkkijonon värin esityksestä perustuen sen sävyn, kylläisyyden, a
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_fr.ts b/i18n/qgis_fr.ts
index 053a5879a2c..a056a717ec3 100644
--- a/i18n/qgis_fr.ts
+++ b/i18n/qgis_fr.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Bibliothèque :
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> la table geometry_columns n'existe pas !
Cette table est indispensable pour qu'une application SIG puisse correctement utiliser les tables à composante spatiale.
@@ -417,13 +415,13 @@ Cette table est indispensable pour qu'une application SIG puisse correcteme
Scripts :
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> La version installée du script ne correspond pas à la version publiée !
Cela est probablement le résultat d'une mise à jour incorrecte de PostGIS.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Cet utilisateur n'a pas les droits de lecture pour la table geometrey_columns !
Cette table est essentielle pour les applications SIG pour énumérer les tables spatiales.
@@ -2098,7 +2096,7 @@ Cela peut provoquer des effets inattendus.
champ de longueur
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Impossible d'effacer le fichier shapefile existant
%s
@@ -2408,47 +2406,24 @@ Are you sure you want to proceed?
Enlever de la sélection actuelle
- Select by location
Sélection par localisation
- Select features in:
Sélection d'entités dans :
- that intersect features in:
qui intersecte les entités dans :
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Modifier la sélection avec :
+ Modifier la sélection avec :
Use selected features only
- Utiliser uniquement les entités sélectionnées
+ Utiliser uniquement les entités sélectionnées
Please specify select layer
@@ -3410,7 +3385,7 @@ Cette extension ne sera pas activée.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4728,7 +4703,7 @@ when pressing on the tool dialog's Help button.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Pour faire apparaître un raster d'une seule bande et d'une palette de couleurs comme un raster à 3 (RVB) ou 4 (RVBA) bandes.
Utile pour les pilotes de sortie comme le JPEG, JPEG2000, MrSID et l'ECW qui ne supportent pas les rasters aux couleurs indexés.
@@ -5528,7 +5503,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&Éditer
@@ -5548,157 +5523,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Sélection
- Measure
Mesure
- &Decorations
&Décorations
- &Layer
&Couche
- New
Nouveau
- &Plugins
E&xtension
- &Help
&Aide
- &Settings
&Préférences
- &Raster
&Raster
- Vect&or
&Vecteur
- &OpenStreetMap
&OpenStreetMap
- File
Fichier
- Manage Layers
Contrôle des couches
- Digitizing
Numérisation
- Advanced Digitizing
Numérisation avancée
- Map Navigation
Navigateur de carte
- Attributes
Attributs
- Plugins
Extensions
- Help
Aide
- Raster
Raster
- Label
Étiquette
- Vector
Vecteur
- Database
Base de données
- Web
Site internet
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Sauvegarder comme image...
- &New Print Composer
&Nouveau composeur d'impression
- Ctrl+P
Ctrl+P
- Composer Manager...
Gestionnaire de composition
@@ -5718,948 +5693,940 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Nouveau depuis un modèle
- Preview Mode
Mode d''affichage
- Paste Features as
Coller les entités comme
- &New
&Nouveau
- &Open...
&Ouvrir
- &Save
&Sauvegarder
- Save &As...
Sauvegarder sous...
- Exit QGIS
Fermer QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
&Annuler
- Ctrl+Z
Ctrl+Z
- &Redo
&Refaire
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Couper les entités
- Ctrl+X
Ctrl+X
- Copy Features
Copier les entités
- Ctrl+C
Ctrl+C
- Paste Features
Coller les entités
- Ctrl+V
Ctrl+V
- Add Feature
Ajouter une entité
- Ctrl+.
Ctrl+.
- Move Feature(s)
Déplacer l'entité
- Reshape Features
Remodeler les entités
- Split Features
Séparer les entités
- Split Parts
Séparer les parties
- Delete Selected
Supprimer les entités sélectionnées
- Add Ring
Ajouter un anneau
- Add Part
Ajouter une partie
- Simplify Feature
Simplifier l'entité
- Delete Ring
Effacer un anneau
- Delete Part
Effacer une partie
- Merge Selected Features
Fusionner les entités sélectionnées
- Merge Attributes of Selected Features
Fusionner les attributs des entités sélectionnées
- Node Tool
Outil de nœud
- Rotate Point Symbols
Rotation des symboles de points
- Snapping Options...
Options d'accrochage
- Pan Map
Se déplacer dans la carte
- Zoom In
Zoom +
- Ctrl++
Zoom +
- Zoom Out
Zoom -
- Ctrl+-
Zoom -
+ Select Single Feature
- Sélectionner une seule entité
+ Sélectionner une seule entité
+ Select Features by Rectangle
- Sélectionner des entités avec un rectangle
+ Sélectionner des entités avec un rectangle
- Select Features by Polygon
Sélectionner des entités avec un polygone
- Select Features by Freehand
Sélectionner des entités à main levée
- Select Features by Radius
Sélectionner des entités selon un rayon
- Deselect Features from All Layers
Désélectionner toutes les entités
- Identify Features
Identifier les entités
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Mesurer une longueur
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Mesurer une aire
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Mesurer un angle
- Zoom Full
Zoom sur l'emprise
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Zoom sur la couche
- Zoom to Selection
Zoom sur la sélection
- Ctrl+J
Mesurer une aire
- Zoom Last
Zoom précédent
- Zoom Next
Zoom suivant
- Zoom Actual Size
Zoom à la taille réelle
- Zoom to Native Pixel Resolution
Zoom à la résolution native des pixels
- Map Tips
Infobulles
- Show information about a feature when the mouse is hovered over it
Affiche une information sur un objet quand le pointeur de la souris le survol
- New Bookmark...
Nouveau signet...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Liste des signets
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Actualiser
- Text Annotation
Annotation de texte
- Form Annotation
Formulaire d'annotation
- Move Annotation
Déplacer une annotation
- Labeling
Étiquetage
- Layer Labeling Options
Paramètres d'étiquetage de la couche
- New Shapefile Layer...
Nouvelle couche shapefile...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Nouvelle couche SpatiaLite...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Calculatrice Raster
- Add Vector Layer...
Ajouter une couche vecteur...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Ajouter une couche raster...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Ajouter une couche PostGIS...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Ajouter une couche Spatialite...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Ajouter une couche MSSQL...
- Add Oracle Spatial Layer...
Ajouter une couche Oracle Spatial
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Ajouter une couche WMS...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Ouvrir la table d'attributs
- Toggle Editing
Basculer en mode édition
- Toggles the editing state of the current layer
Bascule le mode d'édition de la couche courante
- Save for Selected Layer(s)
Sauvegarder les couches sélectionnées
- Save edits to current layer, but continue editing
Enregistrer les modifications de la couche courante tout en continuant l'édition
- Save As...
Sauvegarder sous...
- Add from Layer Definition File...
Ajouter à un Fichier de Définition de Couche (.qlr)
- Save As Layer Definition File...
Enregistrer dans un Fichier de Définition de Couche...
- Normal
Normal
- Normal preview mode
Mode d''affichage normal
- Simulate Photocopy (Grayscale)
Simuler une photocopie (échelle de gris)
- Simulate photocopy (grayscale)
Simuler une photocopie (niveaux de gris)
- Simulate Fax (Mono)
Simuler un fax (mono)
- Simulate fax (mono)
Simuler un fax (monochrome)
- Simulate Color Blindness (Protanope)
Simuler un trouble de vision des couleurs (protanopie)
- Simulate color blindness (protanope)
Simuler un daltonisme (protanopie)
- Simulate Color Blindness (Deuteranope)
Simuler un trouble de vision des couleurs (deuteranopie)
- Simulate color blindness (deuteranope)
Simuler un daltonisme (deutéranopie)
- Set Scale Visibility of Layer(s)
Définir l''échelle de visibilité
- Remove Layer(s)
Supprimer une couche
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Définir le SCR des couches
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Définir le SCR du projet depuis cette couche
- Properties...
Propriétés...
- Query...
Filtrer
- Add to Overview
Ajouter dans l'aperçu
- Add All to Overview
Tout ajouter dans l'aperçu
- Remove All from Overview
Enlever tout de l'aperçu
- Show All Layers
Afficher toutes les couches
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Cacher toutes les couches
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Installer/Gérer les extensions
- Open Field Calculator
Ouvrir la calculatrice de champ
- Add Delimited Text Layer...
Ajouter une couche de texte délimité
- Add Delimited Text Layer
Ajouter une couche de texte délimité
- New Vector Layer
Nouvelle couche vecteur
- Paste features in clipboard into a new OGR vector layer.
Colle les objects dans une nouvelle couche OGR.
- New Memory Vector Layer
Nouvelle couche vecteur en mémoire
- Paste features in clipboard into a new memory vector layer.
Colle les objets dans une nouvelle couche en mémoire.
- Toggle Full Screen Mode
Basculer en mode plein écran
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Propriétés du projet...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Options...
- Custom CRS...
Projection personnalisée...
- Configure shortcuts...
Configurer les raccourcis...
- Local Histogram Stretch
Histogramme de l'emprise locale
- Stretch histogram of active raster to view extents
Étend l'histogramme du raster actif à l'emprise de la vue
- Help Contents
Table des matières de l'Aide
- F1
F1
- API documentation
Documentation de l'API
- QGIS Home Page
Site officiel de QGIS
- Ctrl+H
Ctrl+H
- Check QGIS Version
Vérifier la version de QGIS
- Check if your QGIS version is up to date (requires internet access)
Vérifiez si votre version de QGIS est à jour (exige l'accès à Internet)
- About
À propos
- QGIS Sponsors
Sponsors de QGIS
- Move Label
Déplacer l'étiquette
- Rotate Label
Rotation de l'étiquette
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Pivoter les étiquettes
Rotation de15 deg.
- Change Label
Modifier l'étiquette
- Style Manager...
Gestionnaire de symboles...
- Python Console
Console Python
- Full histogram stretch
Histogramme complet
- Stretch Histogram to Full Dataset
Étendre l'histogramme à tout le jeu de données
- Customization...
Personnalisation
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Uniquement pour éviter les problèmes de racourcis, qui sont gérés par QgsCustomization
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Intégrer des couches et des groupes
- Embed layers and groups from other project files
Intégrer des couches et des groupes depuis d'autres projets
- &Copyright Label
Étiquette de &Copyright
- Creates a copyright label that is displayed on the map canvas.
Ajoute un copyright qui sera affiché sur le canevas de la carte.
- &North Arrow
&Flèche Nord
- "Creates a north arrow that is displayed on the map canvas"
"Ajoute sur le canevas de la carte une flèche qui indique le Nord cartographique"
- &Scale Bar
&Échelle graphique
- Creates a scale bar that is displayed on the map canvas
Crée une échelle graphique qui est affichée sur le canevas de la carte
- Add WFS Layer...
Ajouter une couche WFS...
- Add WFS Layer
Ajouter une couche WFS
- Feature Action
Action de l'entité
- Run Feature Action
Exécuter l'action de l'entité
- Pan Map to Selection
Déplacer la carte jusqu'à la sélection
- Touch zoom and pan
Panoramique et zoom
- Offset Curve
Décalage X,Y
- Copy style
Copier le style
- Paste style
Coller le style
- Add WCS Layer...
Ajouter une couche WCS...
- &Grid
&Grille
- Grid
Grille
- Pin/Unpin Labels
Épingler/dépingler des étiquettes
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6670,44 +6637,44 @@ La touche Shift dépingle, la touche Ctrl bascule d'un état à l'autr
Activables sur toutes les couches éditables
- Highlight Pinned Labels
Mettre en évidence les étiquettes épinglées
- New Blank Project
Nouveau projet vide
- Local Cumulative Cut Stretch
Histogramme cumulatif de l'emprise locale
- Local cumulative cut stretch using current extent, default limits and estimated values.
Histogramme cumulatif de l'emprise locale utilisant l'emprise actuelle, les limites par défauts et les valeurs estimées.
- Full Dataset Cumulative Cut Stretch
Coupe étendue cumulative de l'ensemble de données
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
histogramme cumulatif de l'emprise local utilisant l'emprise total du jeu de données, les limites par défaut et les valeurs estimées
- Show/Hide Labels
Afficher/masquer les étiquettes
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6718,128 +6685,128 @@ Shift+clic pour la masquer
Agit sur toutes les couches actives courantes
- Html Annotation
Annotation HTML
- Duplicate Layer(s)
Dupliquer une couche(s)
- SVG annotation
Annotation SVG
- Save for All Layers
Enregistrer toutes les couches
- Rollback for All Layers
Retourner à l'étape précédente sur toutes les couches
- Cancel for All Layers
Annuler sur toutes les couches
- Rollback for Selected Layer(s)
Retourner à l'étape précédente sur la couches sélectionnée
- Current Edits
Éditions en cours
- Cancel for Selected Layer(s)
Annuler sur la couches sélectionnée
- Save Layer Edits
Sauvegarder les modifications
- Rotate Feature(s)
Pivoter l'entité
- &Download data
Télécharger des &données
- &Import topology from XML
&Importer la topologie depuis un XML
- &Export topology to SpatiaLite
&Exporter la topologie en Spatialite
- Increase brightness
Augmenter la luminosité
- Decrease brightness
Diminuer la luminosité
- Increase contrast
Augmenter le contraste
- Decrease contrast
Baisser le contraste
- Select By Expression
Sélection par expression
- Select features using an expression
Sélectionne les entités en utilisant une expression
- Need commercial support?
Besoin de support commercial ?
- DXF Export...
Export DXF
- Fill Ring
Remplir l'anneau
@@ -6942,7 +6909,7 @@ Agit sur toutes les couches actives courantes
Set global
-
Can't save model
Impossible de sauvegarder le modèle
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
Le modèle ne contient pas d'algorithmes et/ou de paramètres et ne peut pas être exécuté
@@ -7317,7 +7279,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- Le modèle sélectionné n'a pas pu être chargé.
+ Le modèle sélectionné n'a pas pu être chargé.
Erreur sur la ligne %s.
@@ -8167,22 +8129,22 @@ Erreur sur la ligne %s.
Estimation des dérivés normaux...
- minidump written to %1
minidump déposé dans %1
- writing of minidump to %1 failed (%2)
l'écriture du minidump vers %1 a échouée (%2)
- creation of minidump to %1 failed (%2)
la création du minidump vers %1 a échouée (%2)
- Crash dumped
Plantage dumpé
@@ -8335,6 +8297,7 @@ Erreur(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
SCR généré
@@ -8499,85 +8462,85 @@ Erreur(%2): %3
Impossible de convertir '%1' en Intervalle
- Cannot convert '%1' to boolean
Impossible de convertir '%1' en booléen
- Domain max must be greater than domain min
Le max du domaine doit ^etre supérieur au min.
- Exponent must be greater than 0
l'exposant doit être supérieur à 0
- Invalid regular expression '%1': %2
Expression régulière invalide '%1' : %2
- Index is out of range
L'index est hors de portée
- Cannot convert '%1:%2:%3' to color
Impossible de convertir '%1' en couleur
- Cannot convert '%1:%2:%3:%4' to color
Impossible de convertir '%1:%2:%3:%4' en couleur
- "%1" is not a valid color ramp
"%1" n'est pas une palette de couleur valide
- Cannot convert '%1:%2:%3:%4:%5' to color
Impossible de convertir '%1:%2:%3:%4%5' en couleur
- function help for %1 missing
l'aide de la fonction %1 est manquante
- Operators
Opérateurs
- Fields and Values
Champs et valeurs
- Math
Math
- Conversions
Conversions
- Conditionals
Conditions
@@ -8624,58 +8587,58 @@ Erreur(%2): %3
année|années
- Date and Time
Date et heure
- String
Chaîne
- Color
Couleur
- Geometry
Géométrie
- Record
Enregistrement
- No root node! Parsing failed?
Pas de nœud racine !
- (no root)
(pas de racine)
- Unary minus only for numeric values.
Le signe 'moins' ne fonctionne que pour les valeurs numériques.
- Can't preform /, *, or % on DateTime and Interval
Ne peut pas appliquer /, *, ou % sur un type DateTime ou Interval
- [unsupported type;%1; value:%2]
[type non-supporté %1, valeur %2]
- Column '%1' not found
La colonne '%1' n'a pas été trouvée
@@ -8763,10 +8726,7 @@ Erreur(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- La ligne %1 contient %n noeud en double à %2
- La ligne %1 contient %n noeuds en double à %2
-
+ La ligne %1 contient %n noeud en double à %2 La ligne %1 contient %n noeuds en double à %2
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
Version 0.1
@@ -9887,6 +9848,7 @@ Seulement %1 sur %2 entités ont été écrites.
Layers
Couches
@@ -10464,12 +10426,14 @@ Seulement %1 sur %2 entités ont été écrites.
Outils d'importation de Shapefile vers PostgreSQL/PostGIS (SPIT)
+ SQL Anywhere plugin
- Extension SQL AnyWhere
+ Extension SQL AnyWhere
+ Store vector layers within a SQL Anywhere database
- Stocke les couches vectorielles dans une base de données SQL AnyWhere
+ Stocke les couches vectorielles dans une base de données SQL AnyWhere
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS ne trouve pas votre installation de GRASS.
Voulez-vous renseigner le chemin (GISBASE) vers votre installation de GRASS ?
@@ -10588,7 +10552,7 @@ Voulez-vous renseigner le chemin (GISBASE) vers votre installation de GRASS ?
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
- Fetching features failed.
SQL:%1
Error: %2
@@ -10919,7 +10883,7 @@ SQL:%1
Erreur: %2
- Oracle
Oracle
@@ -11379,12 +11343,14 @@ SQL: %1
entité avec plusieurs morceaux
+ Error describing bind parameters
- Erreur de description des paramètres de liaison
+ Erreur de description des paramètres de liaison
+ Error binding parameters
- Erreur de paramètres de liaison
+ Erreur de paramètres de liaison
Read-only field that generates a UUID if empty.
Champ en lecture seule qui créé des UUID lorsqu'il est vide.
-
- Legend
- Légende
-
QSpatiaLiteDriver
- Error opening database
Erreur lors de l'ouverture de la base de données
- Error closing database
Erreur lors de la fermeture de la base de données
- Unable to begin transaction
Impossible de commencer la transaction
- Unable to commit transaction
Impossible d'appliquer la transaction
- Unable to rollback transaction
Impossible d'annuler la transaction
@@ -11589,27 +11550,27 @@ La réponse est :
Pas de requête
- Unable to execute statement
Impossible d'exécuter cette déclaration
- Unable to execute multiple statements at a time
Impossible d'exécuter de multiples déclarations à la fois
- Unable to reset statement
Impossible de réinitiliaser la déclaration
- Unable to bind parameters
Impossible de lier les paramètres
- Parameter count mismatch
Différence dans le compte des paramètres
@@ -11786,61 +11747,61 @@ La réponse est :
QGIS prêt!
- Minimize
Minimiser
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Minimise la fenêtre active
- Zoom
Zoom
- Toggles between a predefined size and the window size set by the user
Bascule entre une taille prédéfinie et la taille de fenêtre ajustée par l'utilisateur
- Bring All to Front
Déplacer tout vers l'avant
- Bring forward all open windows
Déplacer vers l'avant toutes les fenêtres actives
- Current Edits
Éditions en cours
- Error
Erreur
- Failed to open Python console:
Impossible d'ouvrir une console python :
@@ -11864,138 +11825,138 @@ Veuillez contacter les développeurs.
QGIS - %1 ('%2')
- Panels
Panneaux
- Toolbars
Barres d'outils
- Window
Fenêtre
- &Database
&Base de donnée
- &Web
&Internet
- Progress bar that displays the status of rendering layers and other time-intensive operations
Barre de progression affichant l'état d'avancement du rendu des couches et d'autres opérations gourmandes en temps de CPU
- Toggle extents and mouse position display
Basculer les limites et l'affichage de la position du curseur
- Coordinate:
Coordonnée :
- Current map coordinate
Coordonnées actuelles de la carte
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Affiche les coordonnées de la carte sous le curseur. L'affichage est mis à jour en continu, il permet aussi de centrer le canevas sur une position précise. Le format est lat/long ou Est/Nord.
- Current map coordinate (lat,lon or east,north)
Coordonnées actuelles de la carte (lat/long ou est/nord)
- Scale
Échelle
- Current map scale
Échelle actuelle de la carte
- Displays the current map scale
Affiche l'échelle courante de la carte
- Current map scale (formatted as x:y)
L'échelle actuelle de la carte (formatée x:y)
- Render
Rendu
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Si elle est cochée, les couches de la carte sont actualisées (opérations de calcul et d'affichage) à chaque commande de navigation sur la carte et à d'autres évènements. Sinon, aucune actualisation n'est faite. Cela vous permet d'ajouter un grand nombre de couche et de les identifier avant le rendu à l'écran.
- Toggle map rendering
Activer le rendu de carte
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Cette icône montre si la transformation à la volée du système de référence de coordonnées est activée ou pas. Cliquez sur l'icône pour faire apparaître le dialogue de propriétés pour modifier ce comportement.
- CRS status - Click to open coordinate reference system dialog
Statut de la projection - cliquez pour ouvrir la boîte de dialogue de projection
- Ready
Prêt
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Canevas de prévisualisation des cartes. Il peut être utilisé afin d'afficher une représentation de l'agrandissement courant du canevas des cartes. La zone agrandie est signalée par un rectangle rouge. Toutes les couches de la carte peuvent être ajoutées au canevas de prévisualisation.
- Overview
Aperçu
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Carte des légendes affichant toutes les couches actuellement posées sur le canevas. Cochez la case pour activer ou non une couche. Double-cliquez sur une couche dans la légende afin de modifier son apparence et ses propriétés.
- Layers
Couches
- Map layer list that displays all layers in drawing order.
Liste affichant les couches dans l'ordre dde rendu.
- Layer order
Ordre des couches
@@ -12005,394 +11966,388 @@ Veuillez contacter les développeurs.
qgis.db privé
- < Blank >
< Blanc >
- QGIS version
Version de QGIS
- QGIS code revision
Révision du code
- Compiled against Qt
Compilé avec Qt
- Running against Qt
Utilisant Qt
- Compiled against GDAL/OGR
Compilé avec GDAL/OGR
- Running against GDAL/OGR
Utilisé avec GDAL/OGR
- PostgreSQL Client Version
Version du client PostgreSQL
- No support.
Pas de support
- SpatiaLite Version
Version de SpatiaLite
- QWT Version
Version de QWT
- PROJ.4 Version
Version de PROJ.4 :
- QScintilla2 Version
Version de QScintilla2
- This copy of QGIS writes debugging output.
Cette copie de QGIS dispose d'une sortie de débogage.
- %1 doesn't have any layers
%1 ne possède aucune couche
- Invalid Data Source
Source de données non valide
- %1 is not a valid or recognized data source
%1 n'est pas une source de données valide ou reconnue
- Vector
Vecteur
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Impossible d'obtenir le dialogue de sélection PostgreSQL depuis le prestataire.
- %1 is an invalid layer - not loaded
%1 est une couche non valide et ne peut être chargée.
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 est une couche non valide et ne peut être chargée. Veuillez vérifier le <a href="#messageLog">journal des messages</a> pour plus d'informations.
- QGIS files
Fichiers QGIS
- No legend entries selected
Aucune entrée de légende n'a été sélectionnée
- Select the layers and groups you want to remove in the legend.
Sélectionnez les couches et groupes que vous souhaitez retirer de la légende.
- Remove layers and groups
Supprimer couches et groupes
- Remove %n legend entries?
number of legend items to remove
-
- Supprimer %n entrée de légende ?
- Supprimer %n entrées de légende ?
-
+ Supprimer %n entrée de légende ? Supprimer %n entrées de légende ?
- %n legend entries removed.
number of removed legend entries
-
- Supprimer %n entrée de légende ?
- Supprimer %n entrées de légende ?
-
+ Supprimer %n entrée de légende ? Supprimer %n entrées de légende ?
- %1 (%2 type unsupported)
%1 (%2 type non supporté)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/fr/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Voulez-vous sauvegarder le projet courant ? %1
- Invalid Layer
Couche non valide
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Impossible d'obtenir le dialogue de sélection SpatiaLite depuis le prestataire.
- Delimited Text
Texte délimité
- Cannot get Delimited Text select dialog from provider.
Impossible d'obtenir le dialogue de sélection de texte délimité depuis le prestataire.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Impossible d'obtenir le dialogue de sélection MSSQL depuis le prestataire.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Impossible d'obtenir le dialogue de sélection Oracle depuis le prestataire.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Impossible d'obtenir la liste de sélection WMS depuis le prestataire.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Impossible d'obtenir la liste de sélection WCS depuis le prestataire.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Impossible d'obtenir la liste de sélection WFS depuis le prestataire.
- Default failed to open: %1
Échec du chargement : %1
- Default not found: %1
Défaut non trouvé : %1
- Open Template Project
Ouvrir un projet modèle
- Auto-open Project
Ouvrir le projet uatomatiquement
- Failed to open: %1
Échec du chargement : %1
- Not valid project file: %1
Projet invalide : %1
- Project failed to open: %1
Échec du chargement du projet : %1
- Default template has been reopened: %1
Le modèle par défaut a été ré-ouvert : %1
- File not found: %1
Fichier non trouvé : %1
- Calculating...
Calcul...
- Abort...
Annuler...
- Choose a QGIS project file to open
Choisissez un fichier projet QGIS à ouvrir
- Loading project: %1
Chargement du projet : %1
- Unable to open project
Impossible d'ouvrir le projet
- Security warning
Avertissement de sécurité
- project macros have been disabled.
Les macros du projet ont été désactivé.
- Enable macros
Activer les macros
- Project loaded
Projet chargé
- Choose a QGIS project file
Choisissez un fichier projet QGIS
- Saved project to: %1
Projet sauvegardé sous : %1
- Unable to save project %1
Impossible de sauvegarder le projet %1
- Choose a file name to save the QGIS project file as
Choisissez un nom de fichier pour sauvegarder le projet QGIS sous
- Unable to load %1
Impossobme de charger %1
- Choose a file name to save the map image as
Choisissez un nom de fichier et sauvegarder l'image de la carte sous
- Saved map image to %1
Carte sauvegardée sous %1
- Default system font substituted.
Remplacement par la police système.
- Labeling
Étiquetage
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
La police de la couche <b><u>%1</u></b> n'a pas été trouvée (<i>%2</i>). %3
- Open labeling dialog
Ouvrir l'étiquetage
@@ -12493,451 +12448,445 @@ Veuillez contacter les développeurs.
Date/Heure
- Compiled against GEOS
Compilé avec GEOS
- Running against GEOS
Utilisé avec GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
Impossible de créer la couche. Veuillez consulter le <a href="#messageLog">message d'erreur</a> pour plus d'informations.
- Insufficient permissions
Permissions insuffisantes
- The project file is not writable.
Le fichier projet n'est pas modifiable.
- DXF export completed
L'export DXF est terminé
- DXF export failed
L'export DXF a échoué
- Commit errors
Erreurs de commit
- Could not commit changes to layer %1
Impossible de valider les changements pour la couche %1
- Errors: %1
Erreurs : %1
- Show more
En afficher plus
- Labeling Options
Options des étiquettes
- Please select a vector layer first
Veuillez sélectionner une couche vectorielle avant tout.
- Layer labeling settings
Paramètres d'étiquetage de la couche
- Reading raster
Lecture du raster
- Cannot write raster error code: %1
Impossible d'écrire le raster, code d'erreur : %1
- Saving done
Sauvegarde effectuée
- Export to vector file has been completed
L'export du fichier vectoriel est terminé
- Save error
Sauvegarder l'erreur
- Export to vector file failed.
Error: %1
L'export du fichier vectoriel a échoué.
Erreur : %1
- No Layer Selected
Aucune couche sélectionnée
- To delete features, you must select a vector layer in the legend
Pour effacer des données, vous devez sélectionner une couche vecteur dans la légende
- No Vector Layer Selected
Aucune couche vecteur sélectionnée
- Deleting features only works on vector layers
L'effacement des données ne peut s'appliquer qu'à des couches vectorielles
- Provider does not support deletion
Le service prestataire ne supporte pas l'effacement
- Data provider does not support deleting features
Le prestataire de données ne supporte pas l'effacement des objets
- Layer not editable
Couche non éditable
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
La couche courante n'est pas éditable. Choisir 'Début édition' dans dans la barre d'outils digitalisation.
- No Features Selected
Aucune entité sélectionnée
- The current layer has not selected features
La couche active n'a pas d'entités sélectionnées
- Delete features
Effacer les entités
- Delete %n feature(s)?
number of features to delete
-
- Effacer %n entité ?
- Effacer %n entités ?
-
+ Effacer %n entité ? Effacer %n entités ?
- Features deleted
Entités effacées
- Problem deleting features
Problème lors de l'effacement des données
- A problem occured during deletion of features
Un problème est apparu lors de l'effacement des données
- %n feature(s) deleted.
number of features deleted
-
- %n entité supprimée
- %n entités supprimées
-
+ %n entité supprimée %n entités supprimées
- Merging features...
Fusion d'entités...
- Abort
Annuler
- Create unique print composer title
Créer un titre de composition unique
- (title generated if left empty)
(titre généré si laissé vide)
- Composer title
Titre de la composition
- Title can not be empty!
Le titre ne peut rester vide !
- Title already exists!
Ce titre existe déjà !
- Composer %1
Composeur %1
- copy
copier
- No active layer
Aucune couche active
- No active layer found. Please select a layer in the layer list
Aucune couche active trouvée. Veuillez sélectionner une couche dans la liste
- Active layer is not vector
La couche active n'est pas un vecteur
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
L'outil de fusion d'entités ne marche que sur les couches vecteurs. Veuillez sélectionner une couche vecteur dans la liste
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
La fusion d'entités ne peut se faire que lors d'une session d'édition. Pour l'utiliser, basculez en mode d'édition avec un clic-droit sur la couche voulue
- Not enough features selected
Pas assez d'entités sélectionnées
- The merge tool requires at least two selected features
La fusion nécessite au moins deux entités sélectionnées
- Merged feature attributes
Attributs d'entités fusionnées
- Merge failed
Echec de la fusion
- An error occured during the merge operation
Une erreur est survenue lors de l'opération de fusion
- Union operation canceled
Opération d'union annulée
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
L'opération d'union résulte d'un type de géométrie qui n'est pas compatible avec la couche actuelle, elle est donc annulée
- Merged features
Entités fusionnées
- No active vector layer
Pas de couche vectorielle active
- To select features, choose a vector layer in the legend
Pour sélectionner des entités, choisissez une couche vectorielle dans la légende.
- Features cut
Entités découpés
- Features pasted
Entités collées
- Paste features
Coller les entités
- no features could be successfully pasted.
Aucun élément ne peut être collé.
- %1 features were successfully pasted.
%1 éléments ont été collés avec succès.
- %1 of %2 features could be successfully pasted.
%1 élement(s) sur %2 ont été collés avec succès.
- Pasted
Collé
- New memory layer name
Nom de la nouvelle couche en mémoire
- Layer name
Nom de la couche
- No features in clipboard.
Pas d'objets dans le presse-papier.
- No features with geometry found, point type layer will be created.
Pas d'objets avec une géométrie trouvés, une couche de type point va être créée.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Plusieurs types de géométries trouvées, les objets avec une géométrie de type différent de %1 seront créées sans géométrie.
- Cannot create new layer
Impossible de créer de nouvelle couche
- Cannot create field %1 (%2,%3)
Ne peut pas créer le champ %1 (%2,%3)
- Cannot copy style: %1
Ne peut copier le style : %1
- Cannot parse style: %1:%2:%3
Ne peut parser le style : %1:%2:%3
- Cannot read style: %1
Ne peut lire le style : %1
- Start editing failed
Echec du lancement de l'édition
- Provider cannot be opened for editing
Le prestataire de données ne peut être ouvert pour l'édition
- Stop editing
Arrêter l'édition
- Do you want to save the changes to layer %1?
Voulez-vous sauvegarder les modifications pour la couche %1 ?
- Problems during roll back
Problèmes pendant le retour en arrière
- Could not %1 changes to layer %2
Errors: %3
@@ -12947,342 +12896,339 @@ Errors: %3
Erreurs : %3
- rollback
retourner en arrière
- cancel
Annuler
- Save
Sauvegarder
- all
Tout
- Rollback
Retourner en arrière
- Cancel
Annuler
- Current edits
Éditions en cours
- %1 current changes for %2 layer(s)?
%1 modifications dans %2 couches(s) ?
- copy
copier
- Plugin layer
Couche d'extension
- Memory layer
Couche mémoire
- Duplicate layer:
Couche dupliquée :
- %1 (duplication resulted in invalid layer)
%1 (la duplication a provoquée une couche invalide)
- Set scale visibility for selected layers
Définir l''échelle de visibilité pour les couches sélectionnées
- Couldn't load Python support library: %1
Impossible de charger la bibliothèque Python %1
- Couldn't resolve python support library's instance() symbol.
Impossible de résoudre le symbole instance() de la bibliothèque Python.
- Python support ENABLED :-)
Support de Python opérationnel !
- There is a new version of QGIS available
Une nouvelle version de QGIS est disponible
- You are running a development version of QGIS
Vous utilisez une version de développement de QGIS
- You are running the current version of QGIS
Vous utilisez la version courante de QGIS
- Would you like more information?
Voulez-vous plus d'information ?
- QGIS Version Information
Information de version de QGIS
- QGIS - Changes since last release
QGIS - Changements depuis la version précédente
- Unable to get current version information from server
Impossible de récupérer la version courante depuis le serveur
- Connection refused - server may be down
Connexion refusée - le serveur est peut-être indisponible
- QGIS server was not found
Le serveur QGIS n'a pas été trouvé
- Unknown network socket error: %1
Erreur interface réseau (socket) inconnue : %1
- Unable to communicate with QGIS Version server
%1
Impossible de communiquer avec le serveur de version de QGIS %1
- To perform a full histogram stretch, you need to have a raster layer selected.
Pour réaliser un histogramme complet, vous devez sélectionner une couche raster.
- To change brightness or contrast, you need to have a raster layer selected.
Pour changer la luminosité ou le contraste, vous devez sélectionner une couche raster.
- en
documentation language
en
- Layer is not valid
La couche n'est pas valide
- The layer %1 is not a valid layer and can not be added to the map
La couche %1 n'est pas une couche valide et ne peut pas être ajoutée à la carte
- The layer is not a valid layer and can not be added to the map
La couche n'est pas une couche valide et ne peut pas être ajoutée à la carte
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Le projet a des couches en mode édition avec des modifications non-enregistrées, elles ne seront pas enregistrées !
- Save?
Sauvegarder ?
- Current CRS: %1 (OTFR enabled)
SCR actuel : %1 (reproj. à la volée activée)
- Current CRS: %1 (OTFR disabled)
SCR actuel : %1 (reproj. à la volée désactivée)
- Map coordinates for the current view extents
Afficher les coordonnées des limites de la vue courante
- Map coordinates at mouse cursor position
Coordonnées de la carte sous le curseur de la souris
- Extents:
Emprise :
- Maptips require an active layer
Une couche active est requise pour les infobulles
- %n feature(s) selected on layer %1.
number of selected features
-
- %n entité sélectionnée dans la couche %1.
- %n entités sélectionnées dans la couche %1.
-
+ %n entité sélectionnée dans la couche %1. %n entités sélectionnées dans la couche %1.
- Open a GDAL Supported Raster Data Source
Ouvrez des données raster gérées par GDAL
- Error adding valid layer to map canvas
Erreur lors de l'ajout d'une couche valide au canevas
- Raster layer
Couche raster
- %1 is not a supported raster data source
%1 n'est pas une source de données raster gérées
- Unsupported Data Source
Source de données non gérée
- Exit QGIS
Quitter QGIS
- Do you really want to quit QGIS?
Voulez-vous vraiment quitter QGIS ?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Ce projet a été sauvegardé sous une version plus ancienne de QGIS. Lors de la sauvegarde de ce projet, QGIS le mettra à jour vers la version la plus récente, ce qui le rendra probablement inutilisable dans les anciennes version de QGIS.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Ce projet a été enregistré dans une ancienne version de QGIS. Si vous enregistrerez maintenant ce projet, QGIS le mettra à jour à la dernière version, le rendant peut être inutilisable sous les anciennes versions.<p>Même si les développeurs essayent de maintenir une compatibilité descendante, certaines des informations peuvent être perdues. Pour améliorer la qualité de QGIS nous apprécierions si vous remplissiez un rapport de bug à %3. Soyez sûr d'inclure le vieux fichier de projet et de signaler le numéro de version de QGIS sur laquelle vous avez découvert l'erreur.<p>Pour désactiver cet avertissement, décochez la case '%5' dans le menu '%4'.<p>Version du fichier de projet : %1<br>Version actuelle de QGIS : %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Configuration:Options:Général</tt>
- Warn me when opening a project file saved with an older version of QGIS
M'avertir lors de l'ouverture d'un fichier projet sauvegardé avec une version précédente de QGIS
- Project file is older
Le fichier projet est plus vieux
- This project file was saved by an older version of QGIS
Ce fichier de projet a été enregistré dans une ancienne version de QGIS
- Please check the <a href="#messageLog">message log</a> for further info.
Veuillez vérifier le <a href="#messageLog"> message du journal de bord </a> pour plus d'informations.
- A network request timed out, any data received is likely incomplete.
Une requête réseau a expiré. Les données réceptionnées sont probablement incomplètes.
- Warning
Attention
- This layer doesn't have a properties dialog.
Cette couche n'a pas de fenêtre de propriétés.
- Authentication required
Identification requise
- Proxy authentication required
Identification proxy requise
- SSL errors occured accessing URL %1:
Une erreur SSL a été rencontrée lors de l'accès à l'adresse %1 :
-
Always ignore these errors?
@@ -13291,13 +13237,10 @@ Always ignore these errors?
Toujours ignorer ces erreurs ?
- %n SSL errors occured
number of errors
-
- %n erreurs SSL se sont produites
- %n erreurs SSL se sont produites
-
+ %n erreurs SSL se sont produites %n erreurs SSL se sont produites
@@ -13329,7 +13272,7 @@ Toujours ignorer ces erreurs ?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13679,19 +13622,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
Erreur
- unknown exception
Erreur inconnue
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13715,7 +13658,7 @@ Chemin des SVG : %8
Chemin de la BD utilisateur : %9
-
match indentation of application state
@@ -13723,24 +13666,24 @@ Chemin de la BD utilisateur : %9
- [ERROR] Can not make qgis.db private copy
Errur : impossible de faire une copie de qgis.db
- Could not open qgis.db
Impossible d'ouvrir qgis.db
- Migration of private qgis.db failed.
%1
La migration du fichier qgis.db privé a échoué.
%1
- Update of view in private qgis.db failed.
%1
Echec de la mise à jour de la vue dans la base qgis.db.
@@ -13750,28 +13693,28 @@ Chemin de la BD utilisateur : %9
QgsAtlasComposition
- Atlas filter eval error: %1
Erreur d'évaluation du filtre d'atlas: %1
- Composer
Composeur
- No matching atlas features
Pas d'entité Atlas correspondante
- Atlas feature %1 of %2
Entité de l'atlas %1 de %2
- Atlas filename evaluation error: %1
Erreur dans le nom de fichier de l'atlas : %1
@@ -13787,7 +13730,7 @@ Chemin de la BD utilisateur : %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Impossible de régler le modèle de nom de fichier comme '%1'. Erreur de l'analyseur: %2
@@ -14480,10 +14423,7 @@ Parser error:
Attribute table - %1 (%n Feature(s))
feature count
-
- Table d'attributs - %1 (%n entité)
- Table d'attributs - %1 (%n entités)
-
+ Table d'attributs - %1 (%n entité) Table d'attributs - %1 (%n entités)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- êtes-vous sûr de vouloir effacer %1 signet(s) ?
- Êtes-vous sûr(e) de vouloir effacer %n signet(s) ?
-
+ êtes-vous sûr de vouloir effacer %1 signet(s) ? Êtes-vous sûr(e) de vouloir effacer %n signet(s) ?
QgsCategorizedSymbolRendererV2Model
- Symbol
Symbole
- Value
Valeur
- Label
Étiquette
@@ -15265,49 +15202,49 @@ Base de données :%2
Avancé
- Random colors
Couleurs aléatoires
- Symbol levels...
Niveaux de symbole
- High number of classes!
Nombre élevé de classes !
- Classification would yield %1 entries which might not be expected. Continue?
La classification comporterait %1 entrées, ce qui n'est peut-être pas le résultat voulu. On continue ?
- Error
Erreur
- There are no available color ramps. You can add them in Style Manager.
Il n'y a pas de palette de couleur disponible. Vous pouvez en ajouter via le Gestionnaire de Symboles.
- The selected color ramp is not available.
La palette de couleur sélectionnée n'est pas disponible.
- Confirm Delete
Confirmer l'effacement
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Le champ de classification a été modifié de '%1' à '%2'.
Les classes existantes doivent-elles être effacées avant la classification ?
@@ -15365,25 +15302,20 @@ Les classes existantes doivent-elles être effacées avant la classification ?
QgsColorButton
- Select Color
Sélectionner la couleur
- Copy color
Copier la couleur
- Paste color
Coller la couleur
-
- Pick color
-
QgsColorDialog
@@ -15455,7 +15387,7 @@ Les classes existantes doivent-elles être effacées avant la classification ?
Composer
Composeur
@@ -15614,8 +15546,8 @@ Les classes existantes doivent-elles être effacées avant la classification ?
Set as atlas feature for %1
Fixé comme une caractéristique atlas pour %1
@@ -15652,7 +15584,7 @@ Les classes existantes doivent-elles être effacées avant la classification ?
Choose a file name to save the map as
Choisissez un nom de fichier pour sauvegarder la carte sous
@@ -15663,15 +15595,15 @@ Les classes existantes doivent-elles être effacées avant la classification ?
Empty filename pattern
Modèle de nom vide
The filename pattern is empty. A default one will be used.
Le modèle de nom est vide, celui par défaut sera utilisé.
@@ -15682,15 +15614,15 @@ Les classes existantes doivent-elles être effacées avant la classification ?
Unable to write into the directory
Impossible d'écrire dans ce dossier
The given output directory is not writable. Cancelling.
Le dossier défini n'est pas accessible en écriture. Annulation.
@@ -15700,251 +15632,251 @@ Les classes existantes doivent-elles être effacées avant la classification ?
Atlas processing error
Erreur lors la génération de l'atlas
Feature filter parser error: %1
Erreur de l'analyseur du filtre d'élément: %1
Error creating %1.
Erreur à la création de %1.
Rendering maps...
Fabrication des cartes...
Abort
Annuler
- Big image
Grande image
- To create image %1x%2 requires about %3 MB of memory. Proceed?
La création de cette image %1x%2 requiert environ %3Mo de mémoire. Voulez-vous continuez ?
- Choose a file name to save the map image as
Choisissez un nom de fichier et sauvegarder l'image de la carte sous
- Memory Allocation Error
Erreur d'allocation mémoire
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
L'essai de création de l'image #%1( %2x%3 @ %4dpi ) peut provoquer une saturation de la mémoire.
Essayez une résolution ou une taille de papier inférieur.
- Image export error
Erreur lors de l'export de l'image
- Directory where to save image files
Dossier d'enregistrement des fichiers image
- Image format:
Format de l'image :
- SVG warning
avertissement SVG
- Don't show this message again
Ne plus montrer ce message
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p> La fonction d'export SVG de Qgis a plusieurs problèmes dus à des déficiences de
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
code svg de Qt4. En particulier, il y a des problèmes avec les couches qui ne sont par incluses dans l'emprise de la carte.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
<p>Si vous avez besoin d'une sortie vectorielle depuis QGIS, il est conseillé d'imprimer en PostScript si le rendu SVG ne vous satisfait pas.</p>
- SVG Format
Format SVG
- Directory where to save SVG files
Dossier d'enregistrement des fichiers SVG
- SVG export error
erreur lors de l'export du SVG
- on page
à la page
- SVG error
Erreur SVG
- There was an error in SVG output for SVG layer
Il y eu une erreur dans la sortie en SVG de la couche SVG
- copy
copier
- Duplicating composer...
Duplication d'une composition...
- Duplicate Composer
Dupliquer une composition
- Composer duplication failed.
La duplication a échoué.
- Save template
Sauvegarder le modèle
- Composer templates
Modèles de composition
- Save error
Sauvegarder l'erreur
- Error, could not save file
Erreur, impossible d'enregistrer le fichier
- Load template
Charger un modèle
- Read error
Lire l'erreur
- Error, could not read file
Erreur, impossible de lire le fichier
- Composer error
Erreur du composeur
- Error, could not create new composer
Erreur, impossible de créer une nouvelle composition.
- Loading template into composer...
Chargement un modèle dans le composeur..
- Project contains WMS layers
Ce projet contient des couches WMS
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Certains serveurs WMS (e.g. UMN mapserver) ont une limite pour les paramètres de largeur et de hauteur. Imprimer ces couches à partir de ces serveurs peut dépasser ces limites. Si c'est le cas, la couche WMS ne sera pas imprimée
- Project contains composition effects
le projet comporte des effets de composition
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Les effets de composition et de transparence sont actifs dans ce projet sur des couches vectorielles, elles ne pourront pas être imprimées en vecteur. L'impression raster est recommandée.
- Print as raster
Impression raster
- Landscape
Paysage
@@ -17089,67 +17021,67 @@ Essayez une résolution ou une taille de papier inférieur.
QgsComposerItemWidget
- Frame color changed
Couleur du cadre modifiée
- Background color changed
Couleur du fond modifiée
- Item position changed
Position de l'objet modifiée
- Item outline width
Bordure de 'lobjet modifié
- Item frame join style
Style de jointure du cadre de l'objet
- Item frame toggled
Cadre de l'objet activé
- Item background toggled
Couleur du fond activée
- Select background color
Sélectionner la couleur du fond
- Select frame color
Sélection de la couleur du cadre
- Item blend mode changed
Mode de fusion d'objet modifiée
- Item transparency changed
La transparence de l'objet a été modifiée
- Item id changed
L'identifiant de l'objet a été modifié
- Item rotation changed
La rotation de l'objet a été modifiée
@@ -17162,115 +17094,104 @@ Essayez une résolution ou une taille de papier inférieur.
Options globales
- Position and size
Position et taille
- Reference point
Point de référence
- X
X
- Y
Y
- Width
Largeur
- Height
Hauteur
- Page
Page
- ...
- ...
-
-
- Rotation
Rotation
- °
°
- Frame
Cadre
- mm
mm
- Join style
Joindre le style
- Rendering
Rendu
- Blending mode
Mode de fusion
- Thickness
Epaisseur
- Color...
Couleur
- Background
Fond
- Transparency
Transparence
- Item ID
Identifiant de l'objet
- Id
Id
@@ -17303,18 +17224,18 @@ Essayez une résolution ou une taille de papier inférieur.
Couleur de l'étiquette modifiée
- Insert expression
Insérer l'expression
- Label alignment changed
Alignement de l'étiquette modifié
@@ -17420,8 +17341,9 @@ Essayez une résolution ou une taille de papier inférieur.
QgsComposerLegend
+ Legend
- Légende
+ Légende
@@ -17586,12 +17508,12 @@ Essayez une résolution ou une taille de papier inférieur.
Groupe de légende ajouté
- Map %1
Carte %1
- None
Aucun
@@ -18021,107 +17943,100 @@ Essayez une résolution ou une taille de papier inférieur.
QgsComposerMap
- Map %1
Carte %1
- Map will be printed here
La carte sera imprimée ici
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Rendu
- Rectangle
Rectangle
- Solid
Continue
- Cross
Croix
- Markers
-
-
- Decimal
Décimal
- DegreeMinute
Degrée, Minute
- DegreeMinuteSecond
Degré, Minute, Seconde
+ No frame
- Pas de cadre
+ Pas de cadre
- Zebra
Zébré
- Map scale changed
Échelle de la carte modifiée
- Map rotation changed
Rotation de la carte modifiée
- Map extent changed
Emprise de la carte modifiée
- Select font color
Sélectionner la couleur de police
@@ -18137,235 +18052,164 @@ Essayez une résolution ou une taille de papier inférieur.
Sélectionner la couleur du remplissage de la grille
- Canvas items toggled
Objets du canevas activés
- None
Aucun
- Overview frame style changed
Le style du cadre d''aperçu a changé
- Overview centering mode changed
Mode de centrage de l'aperçu modifié
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
- Millimètre
-
-
- Centimeter
-
-
- change...
- Modification...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Case de la grille activée
- Grid interval changed
Intervalle de la grille modifié
- Grid offset changed
Décalage de la grille modifié
- Grid line style changed
Le style de ligne de la grille a été modifié
- Grid type changed
Type de grille modifié
+ Grid cross width changed
- Largeur des croix de la grille modifiée
+ Largeur des croix de la grille modifiée
- Annotation font changed
Police des annotations modifiée
+ Label font changed
- Police de l'étiquette modifiée
+ Police de l'étiquette modifiée
- Annotation distance changed
Distance des annotations modifiée
- Annotation format changed
Format d'annotation modifié
- Annotation toggled
Annotation modifiée
- Changed annotation precision
Précision d'annotation modifiée
- Changed grid frame style
Style du cadre modifié
+ Changed grid frame width
- Largeur du cadre modifiée
+ Largeur du cadre modifiée
- Changed grid frame line thickness
Épaisseur de la ligne du cadre modifiée
- Grid frame color changed
Couleur du cadre modifiée
- Grid frame first fill color changed
Couleur du premier cadre de remplissage modifiée
- Grid frame second fill color changed
Couleur du deuxième cadre de remplissage modifiée
- Inside frame
Dans un cadre
- Outside frame
Cadre extérieur
- Disabled
Désactivé
- Horizontal
Horizontal
- Vertical
Vertical
- Annotation position changed
Position des annotations modifiée
- Changed annotation direction
Direction d'annotation modifiée
- Map %1
Carte %1
@@ -18378,377 +18222,287 @@ Essayez une résolution ou une taille de papier inférieur.
Options de la carte
- Map
Carte
- Main properties
Propriétés principales
- Update preview
Mise à jour de l'aperçu
- Scale
Échelle
- Map rotation
Rotation de la carte
- Draw map canvas items
Dessiner les objets du canevas de la carte
- Lock layers for map item
Verrouiller les couches pour cette carte
- Extents
Emprise
- X max
max X
- Y min
min Y
- Y max
max Y
- Set to map canvas extent
Fixer sur l'emprise courante du canevas de la carte
- X min
min X
- View extent in map canvas
Voir l'étendue sur la carte
- Controlled by atlas
Paramètres contrôlés par l'atlas
- Margin around feature
Marge autour des entités
- %
%
- Fixed scale
Échelle fixe
- Use one of the predefined scales of the project where the atlas feature best fits.
Utilise une des échelles prédéfinies du projet s'ajustant le mieux à l''entité de l''atlas.
- Predefined scale (best fit)
Échelle prédéfinie (meilleur ajustement)
+ Show grid
- Afficher le graticule
+ Afficher le graticule
+ Grid &type
- &Type de graticule
+ &Type de graticule
- Offset
Décalage
- mm
mm
- Blend mode
Mode de fusion
- Interval
Intervalle
- Grid frame
Cadre du graticule
- Frame size
Taille du cadre
- Frame line thickness
Épaisseur de ligne du cadre
- Color...
Couleur
- Frame fill colors
Couleurs de remplissage
- Marker style
- Style de marqueur
-
-
- Overview blending mode
Mode de fusion de l'aperçu
- Invert overview
Inverser l'aperçu
- Center on overview
Centrer sur l'aperçu
- X
X
- °
°
- Y
Y
- Cross width
Largeur des croix
- Frame style
Style du cadre
- Line style
Style de ligne
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Type de grille
-
-
- CRS
- SCR
-
-
- change...
Modification...
- Interval units
-
-
- Map unit
-
-
- Millimeter
- Millimètre
-
-
- Centimeter
-
-
- No frame
- Pas de cadre
-
-
- Zebra
- Zébré
-
-
- Draw coordinates
Afficher les coordonnées
- Format
Format
- Left
À gauche
- Right
À droite
- Top
En haut
- Bottom
En bas
- Font
Police
- Font...
Police
- Font color
- Couleur de police
-
-
- Distance to map frame
Espacement du cadre
- Coordinate precision
Précision des coordonnées
- Font color...
Couleur de police
- Overview
Aperçu
- Overview frame
Cadre d'aperçu
- Overview style
Style de l'aperçu
- Change...
Modification...
@@ -18789,18 +18543,18 @@ Essayez une résolution ou une taille de papier inférieur.
QgsComposerPicture
- Picture expression parsing error: %1
Erreur dans l'analyse de l'expression de l'image source: %1
- Composer
Composeur
- Picture expression eval error: %1
Évaluation de l'erreur de l'expression de l'image source: %1
@@ -18815,64 +18569,64 @@ Essayez une résolution ou une taille de papier inférieur.
Picture changed
Image modifiée
- Expression based image path
Expression basée sur le chemin de l'image
- Picture rotation changed
Rotation de l'image modifiée
- Select new preview directory
Sélectionnez un nouveau dossier d'aperçu
- Picture resize mode changed
Mode de redimensionnement des images modifié
- Picture placement changed
Position de l'image modifiée
- Picture source changed
La source de l'image a changé
- Picture source expression
Expression de l'image source
- Rotation synchronisation toggled
Synchronisation de la rotation activée
- Rotation map changed
Rotation de la carte modifiée
- Map %1
Carte %1
- Creating icon for file %1
Création de l'icône pour le fichier %1
@@ -19039,32 +18793,32 @@ Essayez une résolution ou une taille de papier inférieur.
QgsComposerScaleBar
- units
unités
- km
km
- m
m
- miles
miles
- ft
pieds
- Nm
miles nautiques
@@ -19073,38 +18827,38 @@ Essayez une résolution ou une taille de papier inférieur.
QgsComposerScaleBarWidget
Single Box
Boîte unique
Double Box
Boîte double
Line Ticks Middle
Repères au milieu de la ligne
Line Ticks Down
Repères en-dessous de la ligne
Line Ticks Up
Repères au-dessus de la ligne
Numeric
Numérique
@@ -19144,144 +18898,119 @@ Essayez une résolution ou une taille de papier inférieur.
Miles nautiques
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Sélectionner la couleur de police
-
-
- Select stroke color
-
-
- Map %1
Carte %1
- Scalebar map changed
Barre d'échelle modifiée
- Scalebar line width
Line de la barre d'échelle modifiée
- Scalebar segment size
Taille de segment de la barre d'échelle modifié
- Scalebar segments left
Segments restants de la barre d'échelle
- Number of scalebar segments changed
Nombre des segments de la barre d'échelle changé
- Scalebar height changed
Hauteur de la barre d'échelle modifiée
- Scalebar font changed
Police de la barre d'échelle modifiée
- Scalebar font color changed
Couleur de la police de la barre d'échelle changée
- Scalebar color changed
Couleur de la barre d'échelle modifiée
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Couleur de remplissage de la barre d'échelle changée
- Scalebar unit text
Texte de l'unité de la barre d'échelle
- Scalebar map units per segment
Unités de la carte par segment
- Scalebar style changed
Style de la barre d'échelle modifiée
- Scalebar label bar space
Espace entre les étiquettes de la barre d'échelle
- Scalebar box content space
Espace entre la barre d'échelle et la boîte
- Scalebar alignment
Alignement de l'échelle
- Scalebar changed to map units
Échelle convertie en unités de la carte
- Scalebar changed to feet
Échelle convertie en pieds
- Scalebar changed to nautical miles
Échelle convertie en miles nautiques
- Scalebar changed to meters
Échelle convertie en mètres
- Scalebar line join style
Style de jointure de ligne de barre d'échelle
- Scalebar line cap style
Style d'extrémité de ligne de barre d'échelle
@@ -19424,11 +19153,6 @@ Essayez une résolution ou une taille de papier inférieur.
Secondary fill color...
-
-
- Stroke color...
Couleur du trait
@@ -19438,37 +19162,37 @@ Essayez une résolution ou une taille de papier inférieur.
Ellipse
Ellipse
Rectangle
Rectangle
Triangle
Triangle
- Shape style changed
Style de la couche modifié
- Shape radius changed
Rayon de la forme modifié
- Shape type changed
Type de forme modifiée
@@ -19879,107 +19603,107 @@ Essayez une résolution ou une taille de papier inférieur.
QgsComposition
- Label added
Étiquette ajoutée
- Map added
Carte ajoutée
- Arrow added
Flèche ajoutée
- Scale bar added
Barre d'échelle ajoutée
- Shape added
Forme ajoutée
- Picture added
Image ajoutée
- Legend added
Légende ajoutée
- Table added
Table ajoutée
- Aligned items left
Objets alignés à gauche
- Aligned items horizontal center
Objets alignés sur le centre horizontal
- Aligned items vertical center
Objets alignés sur le centre vertical
- Aligned items right
Objets alignés à droite
- Aligned items top
Objets alignés au sommet
- Aligned items bottom
Objets alignés en bas
- Items locked
Objets verrouillés
- Items unlocked
Objets déverrouillés
- Item z-order changed
Ordre de profondeur des objets modifié
- Remove item group
Supprimer le groupe d'objet
- Frame deleted
Cadre supprimé
- Item deleted
Objet effacé
- Multiframe removed
Multicadre supprimé
@@ -20036,148 +19760,148 @@ Essayez une résolution ou une taille de papier inférieur.
Landscape
Paysage
Portrait
Portrait
Map %1
Carte %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Lettre; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
Personnalisation
@@ -20195,131 +19919,109 @@ Essayez une résolution ou une taille de papier inférieur.
Options du Papier
- Presets
Préconfigurés
- ...
- ...
-
-
- Width
Largeur
- Height
Hauteur
- Units
Unités
- Number of pages
Nombre de pages
- Orientation
Orientation
- Export resolution
Résolution de l'export
- Print as raster
Impression raster
-
- Snap tolerance
- Tolérance d'accrochage (snap)
-
-
- px
- px
-
Change...
Modification...
- Page background
Fond des pages
+ Grid
- Grille
+ Grille
- dpi
dpi (ppp)
- World file on
Générer fichier World file
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
décalage de la grille
- x:
x :
- y:
y :
+ Spacing
- Espacement
+ Espacement
+ Snap to alignments
- Accrocher aux alignements
+ Accrocher aux alignements
+ Tolerance
- Tolérance
+ Tolérance
@@ -21252,7 +20954,7 @@ le SCR existant
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23230,7 +22932,7 @@ Leave empty to automatically apply the maximum value.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Impossible de définir la colonne '%1 comme une colonne de prévisualisation
@@ -23557,7 +23259,7 @@ Parser error:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23570,7 +23272,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24671,7 +24373,7 @@ MyForms.py doit exister dans PYTHONPATH, .qgis / python, ou dans le dossier du p
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -25989,7 +25691,7 @@ Veuillez sélectionner un fichier valide.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26941,17 +26643,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Symbole
- Value
Valeur
- Label
Étiquette
@@ -27044,41 +26746,41 @@ p, li { white-space: pre-wrap; }
Avancé
- Symbol levels...
Niveaux de symbole
- Error
Erreur
- There are no available color ramps. You can add them in Style Manager.
Il n'y a pas de palette de couleur disponible. Vous pouvez en ajouter via le Gestionnaire de Symboles.
- The selected color ramp is not available.
La palette de couleur sélectionnée n'est pas disponible.
- Warning
Attention
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
La classification suivant les ruptures naturelles (Jenks) est de complexitéO(n2), et risque de prendre du temps.
Appuyez sur Échap pour annuler le calcul ou OK pour continuer.
- Renderer creation has failed.
La création du rendu a échouée
@@ -27262,10 +26964,7 @@ Appuyez sur Échap pour annuler le calcul ou OK pour continuer.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Êtes-vous sûr de vouloir effacer la couche sélectionnée ?
- Êtes-vous sûr de vouloir effacer les %n couches sélectionnées ?
-
+ Êtes-vous sûr de vouloir effacer la couche sélectionnée ? Êtes-vous sûr de vouloir effacer les %n couches sélectionnées ?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">Les données GRASS sont enregistrées dans un répertoire en structure arborescente. La géodatabase est le niveau supérieur du répertoire.</p></body></html>
@@ -29017,7 +28716,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">Le secteur GRASS est une collection de cartes pour un territoire ou projet particulier.</p></body></html>
@@ -29052,7 +28751,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">La région GRASS définit un espace de traval pour les modules raster. La région par défaut est valide pour un secteur. Il est possible d'utiliser une région différente par jeu de données et d'en changer ultérieurement.</p></body></html>
@@ -29122,7 +28821,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">Le jeu de données GRASS rassemble les cartes utilisées par un utilisateur. Un utilisateur peur lire des cartes à partir de tous les jeu de données mais ne peut modifier que le sien.</p></body></html>
@@ -29884,10 +29583,7 @@ at line %2 column %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Il y a encore %n couche(s) non retrouvée(s) qui seront perdues si vous fermez maintenant.
- Il y a encore %n couche(s) non retrouvée(s) qui seront perdues si vous fermez maintenant.
-
+ Il y a encore %n couche(s) non retrouvée(s) qui seront perdues si vous fermez maintenant. Il y a encore %n couche(s) non retrouvée(s) qui seront perdues si vous fermez maintenant.
@@ -30017,12 +29713,9 @@ at line %2 column %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Le réseau s'est déconnecté après %n seconde(s) d'inactivité.
-Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
- Le réseau s'est déconnecté après %n secondes d'inactivité.
-Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
-
+ Le réseau s'est déconnecté après %n seconde(s) d'inactivité.
+Ceci est peut-être dû à votre connexion ou celle du serveur WMS. Le réseau s'est déconnecté après %n secondes d'inactivité.
+Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
@@ -31131,7 +30824,7 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
- Label this layer with
Étiqueter cette couche avec
@@ -31297,22 +30990,22 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
...
...
@@ -31368,7 +31061,7 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS. Lignes multiples
- Automated placement settings (apply to all layers)
Paramètres du moteur d'étiquetage ( pour toutes les couches)
@@ -31398,7 +31091,7 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
Rendering
Rendu
@@ -31486,7 +31179,7 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
Alignment
Alignement
@@ -31523,7 +31216,7 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS. Répéter
- Discourage labels from covering features
Eviter que l'étiquette ne recouvre des objets
@@ -31618,82 +31311,82 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS. Tampon
- Labels will not show if larger than this on screen
L'étiquette ne s'affichera pas si sa taille à l'écran est plus grande que la valeur saisie
- px
px
- Data defined
Défini par les données (Note: la rotation nécessite des champs X Y)
- X
X
- Y
Y
- Coordinate
Coordonnée :
- Preserve data rotation values
Garde la valeur de rotation saisie lors de l'épinglage - dépinglage
- horizontal
horizontal
- vertical
vertical
- Label options
Options des étiquettes
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Value < 0 représente une échelle plus proche que 1:1, ex. -10 = 10:1.<br>La valeur 0 désactivite cette limite.
- Maximum
Maximum
- Pixel size-based visibility (labels in map units)
Visibilité basée sur la taille des pixels (étiquettes en unités de carte)
- Labels will not show if smaller than this on screen
L'étiquette ne s'affichera pas si sa taille à l'écran est plus petite que la valeur saisie
- Minimum
Minimum
@@ -31703,7 +31396,7 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS. <
- Scale-based visibility
Visibilité selon l'échelle
@@ -31741,17 +31434,17 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS. Inverser la direction
- Priority
Priorité
- Low
Basse
- High
Haute
@@ -31904,7 +31597,7 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
Rotation
Rotation
@@ -31956,17 +31649,17 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS. Distance
- outside
Extérieur
- inside
Intérieur
- Maximum angle between curved characters
Angle maximal des lettres (étiquettes courbes)
@@ -32072,62 +31765,62 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS. Unité du symbole
- Merge connected lines to avoid duplicate labels
Fusionner les lignes connectées pour éviter la duplication d'étiquettes
- Label every part of multi-part features
Étiqueter toutes les parties d'une entité multi-parties
- Feature options
Options des entités
- Suppress labeling of features smaller than
Ne pas afficher d'étiquettes pour les entités plus petites que
- mm
mm
- Show all labels for this layer (including colliding labels)
Afficher toutes les étiquettes pour cette couche (même celles en conflit)
- Show upside-down labels
Afficher les étiquettes renversées
- never
Jamais
- when rotation defined
Quand une rotation est définie
- always
Toujours
- Limit number of features to be labeled to
Limite du nombre d'étiquettes à afficher
- Number of features sent to labeling engine, though not all may be labeled
Nombre d'objets envoyés au moteur d'étiquetage (toutes peuvent ne pas être affichées)
@@ -32137,17 +31830,17 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS. Position
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Garde la valeur de rotation saisie lors de l'épinglage-dépinglage
- Always show
Toujours afficher
- Show label
Afficher l'étiquette
@@ -32163,12 +31856,12 @@ Ceci est peut-être dû à votre connexion ou celle du serveur WMS.
QgsLayerTreeModel
- Double-click to view legend
Double-clic pour afficher la légende
- following %1 items
not displayed
Les %1 objets suivants
@@ -32226,12 +31919,12 @@ ne sont pas affichés
QgsLegendModel
- Group
Groupe
- No Legend Available
Pas de légende disponible
@@ -32459,18 +32152,18 @@ ne sont pas affichés
QgsMapCanvas
- canvas
canevas
- Rendering
Rendu
- Canvas refresh: %1 ms
Actualisation du canevas : %1 ms
@@ -33655,10 +33348,7 @@ ne sont pas affichés
%n more
unread messages
-
- %n de plus
- %n de plus
-
+ %n de plus %n de plus
@@ -33794,7 +33484,7 @@ ne sont pas affichés
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
La connexion a échouée - Le nom d'hôte n'a pas été indiqué.
@@ -33802,7 +33492,7 @@ ne sont pas affichés
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
La connexion a échouée - Le nom de la base n'a pas été indiqué.
@@ -35354,10 +35044,7 @@ Complément d'information sur l'erreur :
Coordinate Reference System (%n available)
crs count
-
- Système de Coordonnées de Référence (%n disponible)
- Systèmes de Coordonnées de Référence (%n disponibles)
-
+ Système de Coordonnées de Référence (%n disponible) Systèmes de Coordonnées de Référence (%n disponibles)
Solid
Continue
Dots
Pointillés
Crosses
Croix
- Detected active locale on your system: %1
Les paramètres de lieu (locales) suivants ont été trouvé sur votre système : %1
- To vertex
Sur un sommet
- To segment
Sur un segment
- To vertex and segment
Sur un somment et un segment
- map units
Identique à celle de la carte
- pixels
pixels
- Semi transparent circle
Cercle semi-transparent
- Cross
Croix
- None
Aucun
- QGIS files
Fichiers QGIS
- Off
Off
- QGIS
QGIS
- GEOS
GEOS
- Round
Rond
- Mitre
Angle droit
- Bevel
Oblique
- Save default project
Sauvegarder comme projet par défaut
- You must set a default project
Vous devez définir un projet par défaut
- Current project saved as default
Projet courant définit comme défaut
- Error saving current project as default
Erreur lors de l'enregistrement du projet courant en tant que défaut
- Choose a directory to store project template files
Choisissez un dossier pour sauvegarder les fichiers modèles de projet
@@ -36485,105 +36172,105 @@ Toujours le réseau : toujours charger depuis le réseau sans vérifier si le ca
Montrer les entités visibles sur la carte
- Choose project file to open at launch
Choisissez un projet à ouvrir au lancement
- Create Options - %1 Driver
Options de création - Pilote %1
- Create Options - pyramids
Options de création - pyramides
- Restore UI defaults
Restaurer les paramètres par défaut de l'Interface
- Are you sure to reset the UI to default (needs restart)?
Êtes-vous sûr de vouloir restaurer les paramètres par défaut de l'UI (nécessite un redémarrage) ?
- Overwrite
Écraser
- If Undefined
Si non défini
- Unset
Non défini
- Prepend
Ajouter au début
- Append
Ajouter à la fin
- Choose a directory
Choisir un répertoire
- Enter scale
Saisir une échelle
- Scale denominator
Dénominateur de l'échelle
- Load scales
Charger les échelles
- XML files (*.xml *.XML)
Fichiers XML (*.xml)
- Save scales
Enregistrer les échelles
- No Stretch
Pas d'étirement
- Stretch To MinMax
Etirer jusqu'au MinMax
- Stretch And Clip To MinMax
Etirer et couper jusqu'au MinMax
- Clip To MinMax
Couper jusqu'au MinMax
@@ -36603,7 +36290,7 @@ Toujours le réseau : toujours charger depuis le réseau sans vérifier si le ca
General
Général
@@ -36786,7 +36473,7 @@ Toujours le réseau : toujours charger depuis le réseau sans vérifier si le ca
...
...
@@ -36902,7 +36589,7 @@ Toujours le réseau : toujours charger depuis le réseau sans vérifier si le ca
Remove
Supprimer
@@ -36910,7 +36597,7 @@ Toujours le réseau : toujours charger depuis le réseau sans vérifier si le ca
Add
Ajouter
@@ -37170,22 +36857,7 @@ Toujours le réseau : toujours charger depuis le réseau sans vérifier si le ca
Largeur minimale de la ligne / bordure en millimètres.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Supprimer la fenêtre de saisie des attributs lors de la création de chaque nouvelle entité
@@ -37482,18 +37154,22 @@ Toujours le réseau : toujours charger depuis le réseau sans vérifier si le ca
Couleur
+ Grid defaults
- Grille par défaut
+ Grille par défaut
+ Spacing
- Espacement
+ Espacement
mm
mm
@@ -37514,370 +37190,372 @@ Toujours le réseau : toujours charger depuis le réseau sans vérifier si le ca
Snap tolerance
Tolérance d'accrochage (snap)
+ Guide defaults
- Guides par défaut
+ Guides par défaut
- Feature creation
Création d'objet
- Validate geometries
Valider les géométries
- Reuse last entered attribute values
Réutiliser la dernière valeur attributaire saisie
- Rubberband
Contours d'édition
- Line color
Couleur de ligne
- Line width in pixels
Largeur de ligne en pixels
- Line width
Largeur de ligne
- Snapping
Accrochage
- Default snap mode
Mode d'accrochage par défaut
- Default snapping tolerance
Tolérance d'accrochage
- Search radius for vertex edits
Rayon de recherche pour l'édition des sommets
- map units
unités de carte
pixels
pixels
- Open snapping options in a dock window (QGIS restart required)
Ouvrir les options d'accrochage dans une fenêtre intégrée à QGIS (redémarrage requis)
- Vertex markers
Symbole de sommet
- Marker style
Style de marqueur
- Marker size
Taille du marqueur
- Show markers only for selected features
Montrer les symboles uniquement pour les entités sélectionnées
- Curve offset tool
Outil de décalage de courbe
- Miter limit
Limite d'angle droit
- Join style
Style de jointure
- Quadrant segments
Segments de quadrant
- GDAL driver options
Options des pilotes GDAL
- Edit Pyramids Options
Modifier les options de pyramides
- Edit Create Options
Modifier les options de création
- GDAL drivers
Pilotes GDAL
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
Dans certains cas, plus d'un pilote GDAL peut être utilisé pour charger un même format. Utilisez la liste ci-dessous pour sélectionner lequel.
- Name
Nom
- ext
ext
- Flags
Drapeaux
- Description
Description
- CRS for new layers
SCR pour les nouvelles couches
- Select...
Sélection...
- Use &project CRS
Utiliser le SCR du &projet
- Prompt for &CRS
Demander le S&CR
- Use default CRS displa&yed below
Utilis&er le SCR par défaut affiché ci-dessous
- When a new layer is created, or when a layer is loaded that has no CRS
Quand une nouvelle couche est créée ou quand une couche est chargée sans SCR
- Default CRS for new projects
Projection par défaut des nouveaux projets
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Activer automatiquement la projection à la volée si les couches ont des SCR différents.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Activer automatiquement la projection à la volée si les couches ont des SCR différents
- Always start new projects with this CRS
Toujours lancer ce SCR pour les nouveaux projets
- Enable 'on the &fly' reprojection by default
Activer la reprojection 'à la volée' par défaut
- Don't enable 'on the fly' reprojection
Ne pas activer la reprojection à la volée
- Default datum transformations
Transformations géodésiques (datum) par défaut
- Source CRS
SCR source
- Destination CRS
SCR cible
- Source datum transform
Transformation géodésique source
- Destination datum transform
Transformation géodésique cible
- Ask for datum transformation when no default is defined
Demander un datum pour la conversion de coordonnées lorsqu'aucun n'est défini par défaut
- Override system locale
Forcer la nationalité du système
- Locale to use instead
Paramètres de lieu à utiliser
- <b>Note:</b> Enabling / changing overide on local requires an application restart
Note : l'activation ou le changement de paramètre du lieu nécessite le redémarrage de l'application
- Additional Info
Informations supplémentaires
- Detected active locale on your system:
Paramètres de lieu (locale) sur votre système :
- WMS search address
Adresse de recherche WMS
- Timeout for network requests (ms)
Délai d'abandon pour les requêtes réseaux (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Délai d'expiration pour les tuiles WMS-C/WMTS (en heures)
- Max retry in case of tile request errors
Nombre d'essais maximum lors d'une erreur de requête vers une tuile
- User-Agent
User-Agent
- Cache settings
Paramètres du cache
- Directory
Répertoire
- Size [KiB]
Taille [KiB]
- Clear
Effacer
- Use proxy for web access
Utiliser un proxy pour l'accès internet
- Host
Hôte
- Port
Port
- User
Utilisateur
- Leave this blank if no proxy username / password are required
Laissez vide si il n'y pas d'identification / mot de passe requis
- Password
Mot de Passe
- Proxy type
Type de proxy
- Exclude URLs (starting with)
Exclure les adresses (débutant par)
@@ -39851,7 +39529,7 @@ Erreur: %2
Disparition de l'extension
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
L'extension semble avoir été installée, mais je ne sais pas où. Il est probable que l'extension devait contenir un répertoire mal nommé.
Veuillez chercher dans la liste des extensions installées. Vous ne pourrez bénéficier des notifications de mises à jour. Rapportez ce problème à l'auteur de l'extension.
@@ -40574,7 +40252,7 @@ Vous devez relancer QGIS pour la charger de nouveau.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40592,7 +40270,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40610,7 +40288,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41473,155 +41151,155 @@ Choisissez 'Ignorer' pour continuer le chargement sans elles. Choisiss
QgsProjectProperties
- Layer
Couche
- Type
Type
- Identifiable
Identifiant
- Vector
Vecteur
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
Restriction du système de coordonnées
- No coordinate systems selected. Disabling restriction.
Aucun système de coordonnées sélectionnés.
- Selection color
Couleur de la sélection
- Measure tool (CRS transformation: %1)
Outils de mesure (projection 'à la volée' : %1)
- Canvas units (CRS transformation: %1)
Unités du canevas (transformation du SCR : %1)
+ OFF
OFF
+ ON
ON
- CRS %1 was already selected
SCR %1 déjà sélectionné
- Coordinate System Restrictions
Restrictions du système de coordonnées
- The current selection of coordinate systems will be lost.
Proceed?
La sélection courante de systèmes de coordonnées sera perdue. Continuer ?
- Select print composer
Sélection d'un composeur d'impression
- Composer Title
Titre de la composition
- Select restricted layers and groups
Sélection de couches et de groupes spécifiques
- Enter scale
Saisir une échelle
- Scale denominator
Dénominateur de l'échelle
- Load scales
Charger les échelles
- XML files (*.xml *.XML)
Fichiers XML (*.xml)
- Save scales
Enregistrer les échelles
- Select a valid symbol
Sélectionner un symbole valide
- Invalid symbol :
Symbole invalide :
- Parameters:
Paramètres :
+ Select %1 from pull-down menu to adjust radii
Sélectionnez %1 dans la liste déroulante pour ajuster le rayon
- Can only use ellipsoidal calculations when CRS transformation is enabled
Les calculs sur l'ellipsoïde ne sont possibles que quand une transformation SRS est activée.
@@ -41646,7 +41324,6 @@ Proceed?
Project title
Titre du projet
@@ -41686,37 +41363,37 @@ Proceed?
Enregistrer les chemins
- Measure tool
Outil de mesure
- Semi-minor
Semi-mineur
- Semi-major
Semi-majeur
- Used when CRS transformation is turned off
Utilisé lorsque la reprojection à la volée est désactivée
- Canvas units
Unités du canevas
- Meters
Mètres
- Feet
Pied
@@ -41748,97 +41425,97 @@ Proceed?
Serveur OWS
- Ellipsoid
(for distance calculations)
Ellipsoïde (pour les calculs de distances)
- Degree
Degrés
- Degree display
Affichage en degrés
- Decimal degrees
Degrés décimaux
- Degrees, Minutes
Degrés, Minutes
- Degrees, Minutes, Seconds
Degrés, Minutes, Secondes
- Precision
Précision
- Automatically sets the number of decimal places in the mouse position display
Place automatiquement le nombre de décimales dans l'affichage de la position de la souris
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Les décimales qui sont employées pour la position de la souris sont automatiquement calculées de sorte que déplacer la souris d'un Pixel donne un changement à l'affichage d'une position
- Automatic
Automatique
- Sets the number of decimal places to use for the mouse position display
Place le nombre de décimales à utiliser pour l'affichage de la position de la souris
- Manual
Manuel
- The number of decimal places for the manual option
Le nombre de décimales pour l'option manuelle
- decimal places
nombre de décimales
- Project scales
Échelles du projet
- ...
...
- Enable 'on the fly' CRS transformation
Activer la projection 'à la volée'
@@ -41848,69 +41525,69 @@ Proceed?
Identification des couches
- Project layers
Couches du projet
- Layer
Couche
- Type
Type
- Identifiable
Identification
- Marker
Symbole
- Line
Ligne
- Default symbols
Symbole par défaut
- Fill
Remplissage
- Color Ramp
Palette de couleur
- Transparency
Transparence
- %
%
- Style Manager
Gestionnaire de symboles
- Options
Options
@@ -41920,170 +41597,165 @@ Proceed?
Relations
- Project file
- Fichier du projet
-
-
- Nautical miles
Miles nautiques
- Assign random colors to symbols
Assigner une couleur aléatoire aux symboles
- Service capabilities
Informations générales du service
- Person
Personne
- Title
Titre
- Organization
Organisation
- Online resource
Ressource en ligne
- E-Mail
E-Mail
- Phone
Téléphone
- Abstract
Résumé
- Fees
Honoraires
- Access constraints
Contraintes d'accès
- Keyword list
Liste de mots-clés
- WMS capabilities
Capacités WMS
- Add geometry to feature response
Ajouter la géométrie à l'entité de la réponse
- Min. X
X min.
- Min. Y
Y min.
- Max. X
X max.
- Max. Y
Y max.
- Use Current Canvas Extent
Utiliser l'emprise actuelle du canevas
- Used
Utilisé
- Exclude composers
Exclure des compositions
- WFS capabilities
Capacités WFS
- WCS capabilities
Capacités WCS
- Exclude layers
Exclure les couches
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
Qualité des images JPEG (10 : image la plus légère - 100 : meilleure qualité)
- Published
Publié
- Update
Mise à jour
- Insert
Insérer
- Delete
Effacer
- Unselect all
Tout désélectionner
- Select all
Sélectionner tout
@@ -42094,39 +41766,39 @@ Proceed?
Macros
- Advertised URL
URL publiée
- Width
Largeur
- Height
Hauteur
- Maximums for GetMap request
Maximums pour la requête GetMap
- Advertised extent
Emprise annoncée
- CRS restrictions
Restreindre les SCR
- Python macros
Macros Python
@@ -42240,10 +41912,7 @@ De ce fait le sélecteur de projection ne fonctionnera pas...
The where clause returned %n row(s).
returned test rows
-
- La clause where a retournée %n ligne.
- La clause where a retournée %n lignes.
-
+ La clause where a retournée %n ligne. La clause where a retournée %n lignes.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Liste des champs dans ce fichier vectoriel</p></body></html>
@@ -42314,7 +41983,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Liste des valeurs pour le champs courant.</p></body></html>
@@ -42322,7 +41991,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Obtenir un <span style=" font-weight:600;">échantillon</span> des entrées présentes dans le fichier vectoriel</p></body></html>
@@ -42335,7 +42004,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Obtenir <span style=" font-weight:600;">toutes</span> les entrées du fichier vecteur (<span style=" font-style:italic;">si la table est grande, l'opération peut prendre un certain temps</span>)</p></body></html>
@@ -43996,7 +43665,7 @@ Cliquer sur le bouton Aide pour connaître les options valides de création pour
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45075,10 +44744,7 @@ standard deviation ×
Filter returned %n feature(s)
number of filtered features
-
- Le filtre a trouvé %n entité
- Le filtre a trouvé %n entités
-
+ Le filtre a trouvé %n entité Le filtre a trouvé %n entités
@@ -45676,7 +45342,7 @@ standard deviation ×
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45766,10 +45432,7 @@ standard deviation ×
Found %n matching feature(s).
test result
-
- %n entité trouvée.
- %n entités trouvées.
-
+ %n entité trouvée. %n entités trouvées.
Validation finished (%n error(s) found).
number of geometry errors
-
- Validation terminée (%1 erreur trouvée)
- Validation terminée (%n erreurs trouvées).
-
+ Validation terminée (%1 erreur trouvée) Validation terminée (%n erreurs trouvées).
%n selected geometries
selected geometries
-
- %n géométries sélectionnées
- %n géométries sélectionnées
-
+ %n géométries sélectionnées %n géométries sélectionnées
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47324,7 +46981,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47938,8 +47595,8 @@ voulez-vous écraser la remation [%2] ?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47976,122 +47633,150 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Impossible de charger l'interface
+ Impossible de charger l'interface
+ Failed to connect to database
- Erreur durant la connexion à la base de donnée
+ Erreur durant la connexion à la base de donnée
+ A connection to the SQL Anywhere database cannot be established.
- Aucune connexion ne peut être établie vers une base de données SQL AnyWhere
+ Aucune connexion ne peut être établie vers une base de données SQL AnyWhere
+ No suitable key column
- Aucune colonne principale appropriée
+ Aucune colonne principale appropriée
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- La relation source %1 n'a pas de colonne utilisable comme clé unique.
+ La relation source %1 n'a pas de colonne utilisable comme clé unique.
+ Error loading attributes
- Erreur lors du chargement d'attributs
+ Erreur lors du chargement d'attributs
+ Ambiguous field!
- Champ ambigü !
+ Champ ambigü !
+ Duplicate field %1 found
- Champ dupliqué %1 trouvé
+ Champ dupliqué %1 trouvé
+ Read attempt on an invalid SqlAnywhere data source
- Tentative de lecture sur une source de données SqlAnywhere non valide
+ Tentative de lecture sur une source de données SqlAnywhere non valide
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Erreur lors de l'insertion d'entités
+ Erreur lors de l'insertion d'entités
+ Error deleting features
- Erreur lors de la suppression d'entités
+ Erreur lors de la suppression d'entités
+ Error adding attributes
- Erreur lors de l'ajout d'attributs
+ Erreur lors de l'ajout d'attributs
+ Error deleting attributes
- Erreur lors de la supression d'attributs
+ Erreur lors de la supression d'attributs
+ Attribute not found
- Attribut non trouvé
+ Attribut non trouvé
+ Error updating attributes
- Erreur lors du chargement d'attributs
+ Erreur lors du chargement d'attributs
+ Error updating features
- Erreur lors de la modification d'entités
+ Erreur lors de la modification d'entités
+ Error verifying geometry column %1
- Erreur de vérification de la colonne géométrique %1
+ Erreur de vérification de la colonne géométrique %1
+ Unknown geometry type
- Type de géometrie inconnu
+ Type de géometrie inconnu
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- La colonne %1 a le type de géométrie %2 , que QGIS ne supporte pas pour l'instant.
+ La colonne %1 a le type de géométrie %2 , que QGIS ne supporte pas pour l'instant.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- La colonne %1 n'est pas contrainte à un seul SRID alors que QGIS le requiert.
+ La colonne %1 n'est pas contrainte à un seul SRID alors que QGIS le requiert.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Comme QGIS ne supporte que les données planes, le prestataire de service SQL Anywhere va transformer les données dans une projection plane compatible (SRID=%1).
+ Comme QGIS ne supporte que les données planes, le prestataire de service SQL Anywhere va transformer les données dans une projection plane compatible (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Comme QGIS ne supporte que les données planes et qu'aucune projection plane compatible n'a été trouvée, le prestataire de service SQL Anywhere va essayer de transformer les données dans la projection plane WGS84 (SRID=%1).
+ Comme QGIS ne supporte que les données planes et qu'aucune projection plane compatible n'a été trouvée, le prestataire de service SQL Anywhere va essayer de transformer les données dans la projection plane WGS84 (SRID=%1).
+ Mixed Spatial Reference Systems
- Systèmes de Coordonnées mélangés
+ Systèmes de Coordonnées mélangés
+ Error checking database ReadOnly property
- Erreur lors de la vérification de l'accès en lecture seule (ReadOnly).
+ Erreur lors de la vérification de l'accès en lecture seule (ReadOnly).
+ Error loading SRS definition
- Erreur lors du chargement du SCR
+ Erreur lors du chargement du SCR
+ Limited Support of Round Earth SRS
- Supporté limité d u SCR Round Earth
+ Supporté limité d u SCR Round Earth
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- La colonne %1 (%2) contient des géométries appartenant à un système de coordonnées sphérique (SRID=%3), %4.
+ La colonne %1 (%2) contient des géométries appartenant à un système de coordonnées sphérique (SRID=%3), %4.
Les modifications des valeurs géométriques sont désactivées et les performances peuvent en pâtir car les indexs spatiaux ne sont pas utilisés. Pour améliorer ça, considérez la création d'un index spatial sur une nouvelle colone contenant des projections planaires de ces géométries. Pour plus d'aide, référez-vous à la description des fonctions ST_SRID(INT) et ST_Transform(INT) de la documentation de SQL Anywhere.
@@ -48226,14 +47911,14 @@ Les modifications des valeurs géométriques sont désactivées et les performan
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Le symbole avec le nom '%1' existe déjà.
Voulez-vous l''écraser ?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Une palette de couleur avec le nom '%1' existe déjà.
Voulez-vous l''écraser ?
@@ -49363,7 +49048,7 @@ Il y a un problème avec votre base de symboles.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50139,37 +49824,25 @@ L'erreur est : %2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- SUCCES : %n attribut a été ajouté .
- SUCCES : %n attributs ont été ajoutés.
-
+ SUCCES : %n attribut a été ajouté . SUCCES : %n attributs ont été ajoutés.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- ERREUR : %n attribut a été ajouté .
- ERREUR : %n attributs ont été ajoutés.
-
+ ERREUR : %n attribut a été ajouté . ERREUR : %n attributs ont été ajoutés.
SUCCESS: %n attribute(s) added.
added attributes count
-
- SUCCES : %n attribut ajouté.
- SUCCES : %n attributs ajoutés.
-
+ SUCCES : %n attribut ajouté. SUCCES : %n attributs ajoutés.
ERROR: %n new attribute(s) not added
not added attributes count
-
- ERREUR : %n attribut non-ajouté
- ERREUR : %n attributs non-ajoutés
-
+ ERREUR : %n attribut non-ajouté ERREUR : %n attributs non-ajoutés
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- SUCCES : %n valeur d'attribut modifiée.
- SUCCES : %n valeurs d'attribut modifiées.
-
+ SUCCES : %n valeur d'attribut modifiée. SUCCES : %n valeurs d'attribut modifiées.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- ERREUR : %n modification de valeur d'attribut n'a pas été effectué.
- ERREUR : %n modifications de valeurs d'attribut n'ont pas été effectués.
-
+ ERREUR : %n modification de valeur d'attribut n'a pas été effectué. ERREUR : %n modifications de valeurs d'attribut n'ont pas été effectués.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- SUCCES : %n attribut effacé.
- SUCCES : %n attributs effacés.
-
+ SUCCES : %n attribut effacé. SUCCES : %n attributs effacés.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- ERREUR : %n attribut non effacé.
- ERREUR : %n attributs non effacés.
-
+ ERREUR : %n attribut non effacé. ERREUR : %n attributs non effacés.
SUCCESS: %n feature(s) added.
added features count
-
- SUCCES : %n entité ajouté.
- SUCCES : %n entités ajoutées.
-
+ SUCCES : %n entité ajouté. SUCCES : %n entités ajoutées.
ERROR: %n feature(s) not added.
not added features count
-
- ERREUR : %n attribut non-ajouté.
- ERREUR : %n attributs non-ajoutés.
-
+ ERREUR : %n attribut non-ajouté. ERREUR : %n attributs non-ajoutés.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- Erreur : %n entité non ajoutée - le prestataire de données ne supporte pas l'ajout d'entités.
- Erreur : %n entités non ajoutées - le prestataire de données ne supporte pas l'ajout d'entités.
-
+ Erreur : %n entité non ajoutée - le prestataire de données ne supporte pas l'ajout d'entités. Erreur : %n entités non ajoutées - le prestataire de données ne supporte pas l'ajout d'entités.
SUCCESS: %n geometries were changed.
changed geometries count
-
- SUCCES : %n géométrie-modifiée.
- SUCCES : %n géométries modifiées.
-
+ SUCCES : %n géométrie-modifiée. SUCCES : %n géométries modifiées.
ERROR: %n geometries not changed.
not changed geometries count
-
- ERREUR : %n géométrie non-modifiée.
- ERREUR : %n géométries non-modifiées.
-
+ ERREUR : %n géométrie non-modifiée. ERREUR : %n géométries non-modifiées.
Options (%n coordinate reference systems available)
crs count
-
- Options (%n systèmes de coordonnées de référence disponibles)
- Options (%n systèmes de coordonnées disponibles)
-
+ Options (%n systèmes de coordonnées de référence disponibles) Options (%n systèmes de coordonnées disponibles)
Coordinate Reference System (%n available)
crs count
-
- Système de Coordonnées de Référence (%n disponible)
- Systèmes de Coordonnées de Référence (%n disponibles)
-
+ Système de Coordonnées de Référence (%n disponible) Systèmes de Coordonnées de Référence (%n disponibles)
%n Layer(s) selected
selected layer count
-
- %n couche sélectionnée
- %n couches sélectionnées
-
+ %n couche sélectionnée %n couches sélectionnées
(and %n more)
crs
-
- (et %n de plus)
- (et %n de plus)
-
+ (et %n de plus) (et %n de plus)
%n tile requests in background
tile request count
-
- %n requête de tuiles en arrière-plan
- %n requêtes de tuiles en arrière-plan
-
+ %n requête de tuiles en arrière-plan %n requêtes de tuiles en arrière-plan
, %n cache hits
tile cache hits
-
- , %n utilisation du cache
- , %n utilisations du cache
-
+ , %n utilisation du cache , %n utilisations du cache
, %n cache misses.
tile cache missed
-
- , %n erreur de cache.
- , %n erreurs de cache.
-
+ , %n erreur de cache. , %n erreurs de cache.
, %n errors.
errors
-
- , %n erreur.
- , %n erreurs.
-
+ , %n erreur. , %n erreurs.
(and %n more)
crs
-
- (et %n de plus)
- (et %n de plus)
-
+ (et %n de plus) (et %n de plus)
%n missing row(s)
-
- %n ligne(s) manquante(s)
- %n ligne(s) manquante(s)
-
+ %n ligne(s) manquante(s) %n ligne(s) manquante(s)
%n missing column(s)
-
- %n colonne(s) manquante(s)
- %n colonne(s) manquante(s)
-
+ %n colonne(s) manquante(s) %n colonne(s) manquante(s)
%n tile requests in background
tile request count
-
- %n requête de tuiles en arrière-plan
- %n requêtes de tuiles en arrière-plan
-
+ %n requête de tuiles en arrière-plan %n requêtes de tuiles en arrière-plan
, %n cache hits
tile cache hits
-
- , %n utilisation du cache
- , %n utilisations du cache
-
+ , %n utilisation du cache , %n utilisations du cache
, %n cache misses.
tile cache missed
-
- , %n erreurs de cache.
- , %n erreurs de cache.
-
+ , %n erreurs de cache. , %n erreurs de cache.
, %n errors.
errors
-
- , %n erreur.
- , %n erreurs.
-
+ , %n erreur. , %n erreurs.
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
SaDbTableModel
+ Schema
- Schéma
+ Schéma
+ Table
- Table
+ Table
+ Type
- Type
+ Type
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Ligne d'interprétation
+ Ligne d'interprétation
+ Geometry column
- Colonne de géométrie
+ Colonne de géométrie
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Sauvegarder la connexion
+ Sauvegarder la connexion
+ Should the existing connection %1 be overwritten?
- La connexion existante %1 doit-elle être écrasée ?
+ La connexion existante %1 doit-elle être écrasée ?
+ Failed to load interface
- Impossible de charger l'interface
+ Impossible de charger l'interface
+ Test connection
- Test de connexion
+ Test de connexion
+ Connection to %1 was successful
- Connection à %1 réussie
+ Connection à %1 réussie
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Connexion échouée - Vérifiez les options et réessayez.
+ Connexion échouée - Vérifiez les options et réessayez.
Erreur SQL Anywhere : %1
@@ -53564,277 +53179,349 @@ Description : %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Créer une nouvelle connexion SQL Anywhere
+ Créer une nouvelle connexion SQL Anywhere
+ Connection Information
- Information de connexion
+ Information de connexion
+ Name
- Nom
+ Nom
+ Host
- Hôte
+ Hôte
+ Port
- Port
+ Port
+ Server
- Serveur
+ Serveur
+ Database
- Base de données
+ Base de données
+ Connection Parameters
- Paramètres de connexion
+ Paramètres de connexion
+ Username
- Nom d'utilisateur
+ Nom d'utilisateur
+ Password
- Mot de Passe
+ Mot de Passe
+ Name of the new connection
- Nom de la nouvelle connexion
+ Nom de la nouvelle connexion
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Nom ou adresse IP de l'ordinateur hébergeant le serveur de la base (laisser vide pour les connexions locales)
+ Nom ou adresse IP de l'ordinateur hébergeant le serveur de la base (laisser vide pour les connexions locales)
+ Port number used by the database server (leave blank for default 2638)
- Numéro de port utilisé par le serveur (laisser vide pour utiliser celui par défaut, le 2638)
+ Numéro de port utilisé par le serveur (laisser vide pour utiliser celui par défaut, le 2638)
+ Name of the database server (leave blank for default server on host)
- Nom du serveur (laisser vide pour utiliser celui par défaut)
+ Nom du serveur (laisser vide pour utiliser celui par défaut)
+ Name of the database (leave blank for default database on server)
- Nom de la base (laisser vide pour utiliser cele par défaut)
+ Nom de la base (laisser vide pour utiliser cele par défaut)
+ Additional connection parameters
- Paramètres de connexion supplémentaires
+ Paramètres de connexion supplémentaires
+ Database username
- Nom d'utilisateur de la base de données
+ Nom d'utilisateur de la base de données
+ Database password
- Mot de passe de la base de données
+ Mot de passe de la base de données
+ Save the connection username in the registry
- Enregistrer le nom d'utilisateur de cette connexion dans le registre
+ Enregistrer le nom d'utilisateur de cette connexion dans le registre
+ Save Username
- Enregistrer le nom d'utilisateur
+ Enregistrer le nom d'utilisateur
+ &Test Connect
- &Tester la connexion
+ &Tester la connexion
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Sauvegarder le mot de passe de la connexion dans le registre (Attention : non sécurisé !)
+ Sauvegarder le mot de passe de la connexion dans le registre (Attention : non sécurisé !)
+ Save Password
- Sauvegarder le mot de passe
+ Sauvegarder le mot de passe
+ Encrypt packets using simple encryption
- Coder les paquets avec un codage simple
+ Coder les paquets avec un codage simple
+ Simple Encryption
- Codage simple
+ Codage simple
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Utiliser l'estimation pour certaines propriétés de la couche telles que la cardinalité, l'emprise etc. (améliore les performances)
+ Utiliser l'estimation pour certaines propriétés de la couche telles que la cardinalité, l'emprise etc. (améliore les performances)
+ Estimate table metadata
- Estimer les métadonnées de la table
+ Estimer les métadonnées de la table
+ Search for geometry columns in tables owned by other users
- Rechercher des colonnes géométriques dans les tables appartenant à d'autres utilisateurs
+ Rechercher des colonnes géométriques dans les tables appartenant à d'autres utilisateurs
+ Search other users' tables
- Rechercher les tables d'autres utilisateurs
+ Rechercher les tables d'autres utilisateurs
SaSourceSelect
+ &Add
- &Ajouter
+ &Ajouter
+ &Set Filter
- &Filtrer
+ &Filtrer
+ Wildcard
- Joker
+ Joker
+ RegExp
- Expression rationelle
+ Expression rationelle
+ All
- Tout
+ Tout
+ Schema
- Schéma
+ Schéma
+ Table
- Table
+ Table
+ Type
- Type
+ Type
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Ligne d'interprétation
+ Ligne d'interprétation
+ Geometry column
- Colonne de géométrie
+ Colonne de géométrie
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Êtes-vous sûr de vouloir effacer la connexion %1 et tous les paramètres associés ?
+ Êtes-vous sûr de vouloir effacer la connexion %1 et tous les paramètres associés ?
+ Confirm Delete
- Confirmer l'effacement
+ Confirmer l'effacement
+ Select Table
- Sélectionner une Table
+ Sélectionner une Table
+ You must select a table in order to add a layer.
- Vous devez sélectionner une table afin de pouvoir ajouter une couche.
+ Vous devez sélectionner une table afin de pouvoir ajouter une couche.
+ Failed to load interface
- Impossible de charger l'interface
+ Impossible de charger l'interface
+ Connection failed
- La connexion a échoué
+ La connexion a échoué
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Echec de la connexionà la base %1 - Vérifiez les options et réessayez.
+ Echec de la connexionà la base %1 - Vérifiez les options et réessayez.
Erreur SQL Anywhere : %2
Description : %3
+ No accessible tables found
- Aucune table n'est accessible
+ Aucune table n'est accessible
+ Database connection was successful, but no tables containing geometry columns were %1.
- La connexion à la base de données a réussi, mais aucune table ne contenant des géométries n'a été %1.
+ La connexion à la base de données a réussi, mais aucune table ne contenant des géométries n'a été %1.
+ found
- trouvé
+ trouvé
+ found in your schema
- trouvé dans votre schéma
+ trouvé dans votre schéma
SaSourceSelectBase
+ Add SQL Anywhere layer
- Ajouter une couche SQL Anywhere
+ Ajouter une couche SQL Anywhere
+ SQL Anywhere Connections
- Connexion SQL Anywhere
+ Connexion SQL Anywhere
+ Delete
- Effacer
+ Effacer
+ Edit
- Éditer
+ Éditer
+ New
- Nouveau
+ Nouveau
+ Connect
- Connecter
+ Connecter
+ Search options
- Options de recherche
+ Options de recherche
+ Search
- Rechercher
+ Rechercher
+ Search mode
- Mode de recherche
+ Mode de recherche
+ Search in columns
- Rechercher dans les colonnes
+ Rechercher dans les colonnes
SaveAsPythonScriptAction
I/O error
- Error I/O
+ Error I/O
Unable to save edits. Reason:
%s
- Impossible d'enregistrer les modifications. Raison :
+ Impossible d'enregistrer les modifications. Raison :
%s
@@ -54169,20 +53856,24 @@ Description : %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Ajouter une couche SQL Anywhere
+ Ajouter une couche SQL Anywhere
+ Store vector layers within a SQL Anywhere database
- Stocke les couches vectorielles dans une base de données SQL AnyWhere
+ Stocke les couches vectorielles dans une base de données SQL AnyWhere
+ Invalid Layer
- Couche non valide
+ Couche non valide
+ %1 is an invalid layer and cannot be loaded.
- %1 est une couche non valide et ne peut être chargée.
+ %1 est une couche non valide et ne peut être chargée.
@@ -55520,7 +55211,7 @@ Relancer la vérification topologique.
context_help
- <h3>Database connection</h3>
<h3>Connexion à la base de données</h3>
@@ -55566,7 +55257,7 @@ On this tab you can search for WMS servers. It is possible to enter a search-str
To visualize the results, select an table entry, press the <label>Add selected row to WMS list</label> button and change back to the <label>Servers</label> tab.<p>
You only need to request the list of layers by clicking the <label>Connect</label> button.
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55665,7 +55356,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55714,9 +55405,9 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Open Vector Layer Dialog</h3>
@@ -56687,9 +56414,9 @@ sont parfois limités (par exemple pour les shape files) ou se comportent diffé
The open vector layer dialog is used to add vector data to the QGIS map view. Vector data are spatial data described using geometries of points, lines and polygons (enclosed areas).</p>
QGIS supports vector data in a number of formats, including those supported by the OGR library data provider plugin, such as ESRI shape files, MapInfo MIF (interchange format) and MapInfo TAB (native format).</p>
QGIS supports PostGIS layers in a PostgreSQL database and SpatiaLite layers. Support for additional data types (eg. delimited text) is provided by additional data provider plugins. A list of OGR supported vector formats can be found in Appendix A.1 of the User Guide.</p>
-Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
+Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
<h3>Save vector layer as...</h3>
@@ -56986,7 +56755,7 @@ Dans cette section vous pouvez voir la liste des attributs. Pour en supprimer un
See <a href="http://gdal.org/ogr/ogr_formats.html">OGR Vector formats</a> for a list of supported formats and the available options.
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -58390,7 +58159,7 @@ L'extension ne sera pas activée.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -58406,9 +58175,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
<h3>fonction week()</h3>
@@ -58432,7 +58201,7 @@ Indique le numéro de semaine à partir d'une date ou le nombre de semaines
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -58457,7 +58226,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
@@ -58492,7 +58261,7 @@ Une expression conditionnelle qui peut être utilisée pour évaluer de multiple
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -58506,7 +58275,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
<h3>fonction right()</h3>
@@ -58527,7 +58296,7 @@ Renvoie une sous-chaîne de caractères contenant les <i>n</i> derni
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -58538,7 +58307,7 @@ Ce groupe contient les fonctions d'utilisation de couleurs
- <h3>length() function</h3>
Returns the length of a string.
@@ -58551,7 +58320,7 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
<h3>fonction length()</h3>
Renvoie la longueur d'une chaîne de caractères.
@@ -58569,7 +58338,7 @@ Renvoie la longueur d'une chaîne de caractères.
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -58582,7 +58351,7 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
<h3>fonction upper()</h3>
Convertit en lettres majuscules une chaîne de caractères.
@@ -58600,9 +58369,9 @@ Convertit en lettres majuscules une chaîne de caractères.
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -58612,8 +58381,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
<h3>Fonction bbox()</h3>
Renvoie 1 si les géométries croisent l'enveloppe spatiale définie (bounding box), et 0 sinon.
@@ -58631,7 +58400,7 @@ b → geometry
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -58645,7 +58414,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
<h3>fonction left()</h3>
@@ -58665,7 +58434,7 @@ Renvoie une sous-chaîne de caractères contenant les <i>n</i> premi
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -58694,7 +58463,7 @@ Note : cette fonction n'est disponible que dans certains cas et renvoie 0 s
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -58727,9 +58496,9 @@ Arrondit par excès un nombre.
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -58740,7 +58509,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
<h3>fonction toreal()</h3>
Convertit une chaîne de caractères en nombre réel. Aucune modification n'est effectuée si la valeur ne peut pas être convertie en nombre réel (par ex, '123.56asd' est invalide). Les nombres sont arrondis lors de la sauvegarde des modifications si la précision autorisée est plus petite que celle du résultat de la conversion.
@@ -58758,7 +58527,7 @@ Convertit une chaîne de caractères en nombre réel. Aucune modification n&apos
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -58785,7 +58554,7 @@ Fournit la coordonnée x de l'entité courante.
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -58814,14 +58583,14 @@ Aucun
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -58830,8 +58599,8 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
<h3>Fonction strpos()</h3>
Renvoie la position d'une sous-chaîne à l'intérieur d'une chaîne de caractère.
@@ -58853,7 +58622,7 @@ Renvoie -1 si la sous-chaîne n'est pas trouvée.
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -58890,7 +58659,7 @@ Cette fonction demande deux arguments
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -58907,10 +58676,10 @@ None
<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -58926,10 +58695,10 @@ None
<pre>$atlasfeatureid = $id</pre>
-
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -58958,7 +58727,7 @@ geom → une géométrie
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -58991,7 +58760,7 @@ Arrondit par défaut un nombre.
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59020,9 +58789,9 @@ geom → une géométrie
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -59033,7 +58802,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
<h3>fonction toint()</h3>
Convertit une chaîne de caractères en nombre entier. Rien n'est modifié si une valeur ne peut être convertie en entier (par ex '123asd' est invalide).
@@ -59051,7 +58820,7 @@ Convertit une chaîne de caractères en nombre entier. Rien n'est modifié
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -59078,7 +58847,7 @@ Fournit la coordonnée y de l'entité courante.
- <h3>tostring() function</h3>
Converts a number to string.
@@ -59091,7 +58860,7 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
<h3>tostring() function</h3>
Convertit un nombre en chaîne de caractères.
@@ -59109,7 +58878,7 @@ Convertit un nombre en chaîne de caractères.
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -59138,7 +58907,7 @@ None
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -59155,10 +58924,10 @@ arguments to determine the quadrant of the result
<p><h4>Example</h4>
atan2(1.0, 1.732) → 0.523611477769969</p>
-
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -59187,7 +58956,7 @@ Renvoie le sinus d'un angle.
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -59203,12 +58972,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -59256,20 +59025,20 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -59293,7 +59062,7 @@ Convertit une chaîne de texte en type de donnée Qt.
<code>todate('2012-05-04') → 2012-05-04</code><br>
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -59310,12 +59079,12 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -59344,14 +59113,14 @@ Renvoie l'arccosinus d'une valeur en radians.
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -59366,7 +59135,7 @@ Le chargement des valeurs de champs provenant de couches WFS n'est pas gé
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -59384,10 +59153,10 @@ This function takes two arguments.
<code>log(2, 32) → 5</code><br>
<code>log(0.5, 32) → -5</code><br>
-
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -59396,14 +59165,14 @@ Ce groupe contient des fonctions qui opèrent sur des objets géométriques tels
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -59418,7 +59187,7 @@ Le chargement des valeurs de champs provenant de couches WFS n'est pas gé
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -59447,7 +59216,7 @@ Aucun
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -59476,7 +59245,7 @@ Renvoie l’exponentielle d'une valeur.
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -59493,13 +59262,13 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -59544,7 +59313,7 @@ utiliser <code>round(decimal)</code> pour arrondir à l'entier
- <h3>$now function</h3>
Returns the current date and time
@@ -59573,7 +59342,7 @@ Aucun
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -59588,7 +59357,7 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
<h3>color_hsl() function</h3>
Retourne une chaîne de caractères représentant une couleur d'après ses composantes de teinte, saturation et luminosité
@@ -59606,7 +59375,7 @@ color_hsl(100,50,70) → '166,217,140'</p>
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -59619,8 +59388,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -59636,10 +59405,10 @@ accelerating as the input values approach the domain maximum. Smaller exponents
-
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -59651,12 +59420,12 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -59668,7 +59437,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
<h3>Fonction union()</h3>
Renvoie une géométrie représentant l'union de la série de points en entrée.
@@ -59685,7 +59454,7 @@ b → géométrie
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59713,7 +59482,7 @@ geom → une géométrie
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59741,7 +59510,7 @@ geom → a geometry
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59769,7 +59538,7 @@ geom → une géométrie
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -59781,8 +59550,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Fonction contains()</h3>
Retourne vrai si et seulement si aucun des points de b se trouve à l'extérieur de a, et au moins un point de l'intérieur de b se situe à l'intérieur de a.
@@ -59797,7 +59566,7 @@ geometry → geometry
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -59812,13 +59581,13 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -59834,7 +59603,7 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
<h3>Fonction color_rgb()</h3>
@@ -59855,7 +59624,7 @@ Retourne une chaîne de caractères représentant une couleur d'après ses
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -59872,7 +59641,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
<h3>color_cmyk() function</h3>
@@ -59893,7 +59662,7 @@ color_cmyk(<i>cyan, magenta, jaune, noir</i>)</p>
color_cmyk(100,50,0,10) → '0,115,230'</p>
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -59905,7 +59674,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
<h3>Fonction intersection()</h3>
Renvoie une géométrie représentant la portion partagée par les géométries a et b.
@@ -59922,7 +59691,7 @@ géométrie b → géométrie
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -59932,12 +59701,12 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
@@ -59966,7 +59735,7 @@ Les palettes de couleurs disponibles varient en fonction des versions de QGIS. C
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -59977,8 +59746,8 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
@@ -60005,7 +59774,7 @@ Aucun
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -60020,7 +59789,7 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
<h3>Fonction color_hsv()</h3>
Retourne une chaîne de caractères représentant une couleur d'après ses composantes de teinte, saturation et valeurs
@@ -60040,7 +59809,7 @@ Retourne une chaîne de caractères représentant une couleur d'après ses
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -60051,9 +59820,9 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
<h3>Expression ILIKE</h3>
Renvoie 1 si le premier paramètre correspond au modèle fourni, sans tenir compte de la casse. LIKE peut être utilisé à la place de ILIKE pour prendre en compte la sensibilité à la casse. Fonctionne aussi avec les nombres.
@@ -60071,7 +59840,7 @@ Aucun
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -60082,9 +59851,9 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
<h3>Expression LIKE</h3>
Renvoie 1 si le premier paramètre correspond au modèle fourni. Fonctionne aussi avec les nombres.
@@ -60102,7 +59871,7 @@ Aucun
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60130,7 +59899,7 @@ geom → une géométrie
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -60141,7 +59910,7 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
<h3>Fonction geomFromGML() </h3>
@@ -60159,7 +59928,7 @@ text → géométrie au format GML
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -60168,7 +59937,7 @@ Ce groupe contient des fonctions de gestion de données horaires et de date
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -60180,8 +59949,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
<h3>Fonction combine()</h3>
Retourne la combinaison des géométries a et b.
@@ -60199,9 +59968,9 @@ b → géométrie
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -60211,8 +59980,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>Fonction intersects()</h3>
Renvoie 1 si les géométries s'intersecte spatialement (partage n'importe qu'elle portion de l'espace) et 0 sinon.
@@ -60230,7 +59999,7 @@ b → géométrie
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -60273,7 +60042,7 @@ Restreint la valeur d'entrée à se trouver dans une gamme de valeur défin
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -60285,8 +60054,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
<h3>Fonction disjoint()</h3>
Renvoie 1 si les géométries ne "s'intersecte pas spatialement", c'est à dire qu'elle ne partage aucun espace commun, 0 sinon.
@@ -60304,7 +60073,7 @@ b → géométrie
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -60315,7 +60084,7 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
<h3>Fonction geomFromWKT()</h3>
@@ -60333,7 +60102,7 @@ text → géométrie au format WKT
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -60364,43 +60133,7 @@ b → distance pour le tamponjavascript:;
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -60429,10 +60162,10 @@ Aucun
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -60460,25 +60193,7 @@ None
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -60490,8 +60205,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Fonction crosses()</h3>
Renvoie 1 si les géométries en entrée ont certains points internes en commun, mais pas tous.
@@ -60509,7 +60224,7 @@ b → une géométrie
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -60536,7 +60251,7 @@ a → une géométrie
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -60548,8 +60263,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>Fonction touches()</h3>
Renvoie 1 si les géométries en entrée ont au moins un point en commun mais que leur intérieur ne s'intersectent pas.
@@ -60567,7 +60282,7 @@ b → une géométrie
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -60579,8 +60294,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Fonction overlaps() </h3>
Renvoie 1 si les géométries en entrée partagent un espace, sont de la même dimension, mais ne sont pas complètement contenues l'une dans l'autre.
@@ -60598,7 +60313,7 @@ b → une géométrie
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -60629,7 +60344,7 @@ Aucun
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -60658,7 +60373,7 @@ None
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -60689,7 +60404,7 @@ Aucun
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -60718,7 +60433,7 @@ a → géométrie
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -60730,8 +60445,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
<h3>Fonction within()</h3>
Renvoie 1 si la géométrie a est complètement contenue à l'intérieur de la géométrie b.
@@ -60749,7 +60464,7 @@ geometry → géométrie
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -60767,10 +60482,10 @@ $map → "canvas" (within the main QGIS main canvas)</pre>
-
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -60782,7 +60497,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
<h3>Fonction distance()</h3>
Renvoie la distance minimale (basée sur la référence spatiale) entre deux géométries en unités projetées.
@@ -60799,7 +60514,7 @@ b → géométrie
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -60811,7 +60526,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
<h3>Fonction difference()</h3>
Renvoie une géométrie qui représente la portion d'une géométrie a qui n'intersecte pas une géométrie b.
@@ -60828,7 +60543,7 @@ geometry → géométrie
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -60839,8 +60554,8 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
@@ -60861,7 +60576,7 @@ Aucun
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -60873,7 +60588,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
<h3>Fonction symDifference()</h3>
Renvoie une géométrie représentant les portions ne s'intersectant pas des géométries en entrée.
@@ -60890,7 +60605,7 @@ b → une géométrie
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -60919,12 +60634,12 @@ None
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -60948,7 +60663,7 @@ Convertit une chaîne de caractères en un type d'intervalle. Peut être ut
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -60964,10 +60679,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
<h3>Fonction hour()</h3>
@@ -60992,7 +60707,7 @@ Extrait l'heure H d'une date/heure ou d'une heure, ou le nombre d
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -61008,7 +60723,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
<h3>Fonction color_hsla() </h3>
Retourne une chaîne de caractères représentant une couleur d'après ses composantes de teinte, saturation, luminosité et alpha (transparence).
@@ -61029,7 +60744,7 @@ Retourne une chaîne de caractères représentant une couleur d'après ses
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -61056,7 +60771,7 @@ Aucun
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
@@ -61065,12 +60780,12 @@ Ce groupe contient des fonctions qui opèrent sur l'identification des enre
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -61079,10 +60794,10 @@ Convert a string into Qt time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>totime('12:30:01') → 12:30:01</code><br>
-
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -61097,7 +60812,7 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
<h3>Fonction replace()</h3>
Renvoie une chaîne de caractères dont une sous chaîne est remplacée par la chaîne de caractère spécifiée en entrée.
@@ -61117,7 +60832,7 @@ Renvoie une chaîne de caractères dont une sous chaîne est remplacée par la c
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
@@ -61126,7 +60841,7 @@ Ce groupe contient des fonctions qui gèrent la vérification des conditions dan
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -61155,7 +60870,7 @@ abs(<i>valeur</i>)<br>
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -61186,7 +60901,7 @@ Returns the largest value in a set of values.
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -61215,7 +60930,7 @@ Retourne la racine carrée d'une valeur
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
@@ -61224,7 +60939,7 @@ Ce groupe contient des fonctions qui gèrent la vérification des conditions dan
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -61242,7 +60957,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
<h3>Fonction color_cmyka()</h3>
@@ -61265,7 +60980,7 @@ Retourne une chaîne de caractère représentant une couleur (cyan, magenta, jau
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -61302,7 +61017,7 @@ Supprime également les décimales dont la position dépasse celle spécifiée e
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -61318,15 +61033,15 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -61351,7 +61066,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
@@ -61385,7 +61100,7 @@ renvoyer un résultat.
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -61421,7 +61136,7 @@ Cette fonction demande deux arguments.
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61450,7 +61165,7 @@ geom → une géométrie
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -61471,10 +61186,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -61487,7 +61202,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
<h3>Fonction trim()</h3>
Supprime tous les espaces blancs (espace, tabulation, etc) en début et en fin de la chaîne de caractère en entrée.
@@ -61505,7 +61220,7 @@ Supprime tous les espaces blancs (espace, tabulation, etc) en début et en fin d
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -61521,16 +61236,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -61559,9 +61274,9 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
<h3>fonction age() </h3>
@@ -61599,7 +61314,7 @@ use <code>day</code>pour extraire le nombre de jours<br>
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -61634,7 +61349,7 @@ Cette fonction prend un seul argument..
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
@@ -61643,7 +61358,7 @@ Ce groupe contient les fonctions de conversion d'un type de données vers u
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -61672,7 +61387,7 @@ cos(1.571) → 0.000796326710733263</p>
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -61681,7 +61396,7 @@ Ce groupe contient des opérateurs tels que + - *
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -61697,16 +61412,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -61735,7 +61450,7 @@ atan(0.5) → 0.463647609000806</p>
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -61762,7 +61477,7 @@ Aucun
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -61776,7 +61491,7 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
<h3>Fonction title() </h3>
Convertit tous les mots de la chaîne de caractère en casse de titre (tous les mots
@@ -61795,7 +61510,7 @@ title('hello WOrld') → 'Hello World'</p>
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -61809,12 +61524,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -61829,7 +61544,7 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
<h3>fonction substr()</h3>
Renvoie une partie d'une chaîne de caractères
@@ -61849,12 +61564,12 @@ Renvoie une partie d'une chaîne de caractères
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -61864,10 +61579,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -61882,12 +61597,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -61901,12 +61616,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -61935,7 +61650,7 @@ Aucun
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -61952,7 +61667,7 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
<h3>Fonction color_rgba()</h3>
@@ -61974,7 +61689,7 @@ color_rgba(255,127,0,200) → '255,127,0,200'</p>
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -62003,7 +61718,7 @@ Aucun
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
@@ -62012,7 +61727,7 @@ Ce groupe contient des fonctions mathématiques telles que racine carré, sinus,
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -62043,7 +61758,7 @@ Renvoie la plus petite valeur d'un jeu de donnée.
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -62054,7 +61769,7 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
<h3>Fonction lower()</h3>
Convertit une chaîne de caractères en lettres minuscules.
@@ -62070,7 +61785,7 @@ Convertit une chaîne de caractères en lettres minuscules.
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -62084,10 +61799,10 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
@@ -62096,7 +61811,7 @@ Ce groupe contient des fonctions qui opèrent sur des chaînes telles que rempla
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -62109,7 +61824,7 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
<h3>Fonction concat()</h3>
Concatène plusieurs chaînes de caractères en une seule.
@@ -62127,7 +61842,7 @@ Concatène plusieurs chaînes de caractères en une seule.
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -62144,8 +61859,8 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
<h3>Fonction coalesce()</h3>
@@ -62170,7 +61885,7 @@ Cette fonction peut prendre un nombre infini d'argument.
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -62199,12 +61914,12 @@ Renvoie l’arc-sinus d'une valeur en radians.
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -62213,15 +61928,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -62252,14 +61967,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -62278,14 +61993,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -62390,12 +62105,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -62424,7 +62139,7 @@ Renvoie la tangente d'un angle.
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -62438,10 +62153,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -62476,7 +62191,7 @@ Cette fonction nécessite un argument.
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -62492,7 +62207,7 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
<h3>Fonction color_hsva()</h3>
Retourne une chaîne de caractères représentant une couleur d'après ses composantes de teinte, saturation, valeur et alpha (transparence).
@@ -65067,4 +64782,4 @@ Retourne une chaîne de caractères représentant une couleur d'après ses
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_hr.ts b/i18n/qgis_hr.ts
index 60f50026ed1..bf4b8e33240 100644
--- a/i18n/qgis_hr.ts
+++ b/i18n/qgis_hr.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,9 +205,9 @@
Knjižnica:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
-
create new schemas
@@ -269,7 +267,7 @@ This table is essential for many GIS applications for enumeration of tables.
<warning> This user has no privileges to access this schema!
-
Relation type:
@@ -289,7 +287,7 @@ This table is essential for many GIS applications for enumeration of tables.
Unknown (<a href="action:rows/count">find out</a>)
-
Name
@@ -357,7 +355,7 @@ This table is essential for many GIS applications for enumeration of tables.
Spatial ref:
-
Estimated extent:
@@ -365,7 +363,7 @@ This table is essential for many GIS applications for enumeration of tables.
(unknown) (<a href="action:extent/get">find out</a>)
-
Extent:
@@ -373,11 +371,11 @@ This table is essential for many GIS applications for enumeration of tables.
<warning> There isn't entry in geometry_columns!
-
<warning> No spatial index defined (<a href="action:spatialindex/create">create it</a>)
-
Pages:
@@ -393,7 +391,7 @@ This table is essential for many GIS applications for enumeration of tables.
<warning> This user doesn't have usage privileges for this schema!
-
Rows (counted):
@@ -405,7 +403,7 @@ This table is essential for many GIS applications for enumeration of tables.
<warning> There's a significant difference between estimated and real row count. Consider running <a href="action:vacuumanalyze/run">VACUUM ANALYZE</a>.
-
<warning> No primary key defined for this table!
@@ -416,14 +414,14 @@ This table is essential for many GIS applications for enumeration of tables.Skripte:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
-
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
-
Length
@@ -443,7 +441,7 @@ This table is essential for many GIS applications for enumeration of tables.
<a href="action:triggers/enable">Enable all triggers</a> / <a href="action:triggers/disable">Disable all triggers</a>
-
Definition
@@ -455,7 +453,7 @@ This table is essential for many GIS applications for enumeration of tables.
&Versioning
-
&Table
@@ -587,7 +585,7 @@ Upit:
Do you want to %s all triggers?
-
Table triggers
@@ -595,7 +593,7 @@ Upit:
Do you want to %s trigger %s?
-
Table trigger
@@ -603,7 +601,7 @@ Upit:
Do you want to %s spatial index for field %s?
-
Spatial Index
@@ -2095,7 +2093,7 @@ Ovo može imati neočekivane rezultate.
polje dužine
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Ne mogu brisati postojeću shape datoteku
%s
@@ -2248,7 +2246,7 @@ Would you like to add the new layer to the TOC?
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Distance matrix
@@ -2404,47 +2402,24 @@ Sigurno želite nastaviti?
Pomicanje iz trenutačnog odabira
- Select by location
Odaberi po lokaciji
- Select features in:
Odaberi elemente u:
- that intersect features in:
koje presjecaju elemente u:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Modificiaraj trenutni odabir s:
+ Modificiaraj trenutni odabir s:
Use selected features only
- Koristi samo odabrane elemente
+ Koristi samo odabrane elemente
Please specify select layer
@@ -2646,12 +2621,12 @@ Sigurno želite nastaviti?
Get scripts and models
-
about:blank
- o:prazno
+
@@ -2727,7 +2702,7 @@ Sigurno želite nastaviti?
Processing modeler
-
Enter number or expression
-
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -2826,17 +2801,17 @@ Sigurno želite nastaviti?
Dialog
-
Output
- Izlaz
+
Style
- Stil
+
@@ -2922,7 +2897,7 @@ Sigurno želite nastaviti?
DlgSqlWindow
%d rows, %.1f seconds
-
Sorry
@@ -2939,43 +2914,43 @@ kolona geometrije - kolona s jedinstvenim cjelobrojnim vrijednostimaDlgTableProperties
Sorry
-
nothing selected
-
Are you sure
-
really delete column '%s'?
-
really delete constraint '%s'?
-
The selected table has no geometry
-
Create?
-
Create spatial index for field %s?
-
Nothing selected
-
really delete index '%s'?
-
@@ -3051,76 +3026,76 @@ kolona geometrije - kolona s jedinstvenim cjelobrojnim vrijednostima
Field calculator
- Kalkulator polja
+
Create a new field
-
Output field name
- Naziv izlaznog polja
+
Output field type
- Tip izlaznog polja
+
Output field width
- Širina izlaznog polja
+
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
- Preciznost
+
Input layer
- Ulazni sloj
+
Update existing field
- Osvježi postojeće polje
+
Output file
-
...
- ...
+
FieldsCalculatorDialog
[Save to temporary file]
-
Save file
- Spremi datoteku
+
Unable to execute algorithm
-
Wrong or missing parameter values
-
@@ -3176,11 +3151,11 @@ kolona geometrije - kolona s jedinstvenim cjelobrojnim vrijednostimaUnable to load {0} plugin.
The required "{1}" module is missing.
Install it and try again.
-
QGIS version detected:
-
This version of Gdal Tools requires at least QGIS version 1.0.0
@@ -3250,31 +3225,31 @@ Dodatak neće biti omogućen.
Convert a 24bit RGB image to 8bit paletted
-
PCT to RGB
-
Convert an 8bit paletted image to 24bit RGB
-
Extraction
-
Contour
-
Builds vector contour lines from a DEM
-
Clipper
-
Analysis
@@ -3282,63 +3257,63 @@ Dodatak neće biti omogućen.
Sieve
-
Removes small raster polygons
-
Near black
-
Convert nearly black/white borders to exact value
-
Fill nodata
-
Fill raster regions by interpolation from edges
-
Proximity (Raster distance)
-
Produces a raster proximity map
-
Grid (Interpolation)
-
Create raster from the scattered data
-
DEM (Terrain models)
-
Tool to analyze and visualize DEMs
-
Miscellaneous
-
Build Virtual Raster (Catalog)
-
Builds a VRT from a list of datasets
-
Merge
@@ -3346,39 +3321,39 @@ Dodatak neće biti omogućen.
Build a quick mosaic from a set of images
-
Information
-
Lists information about raster dataset
-
Build overviews (Pyramids)
-
Builds or rebuilds overview images
-
Tile index
-
Build a shapefile as a raster tileindex
-
GdalTools settings
-
Various settings for Gdal Tools
-
@@ -3403,7 +3378,7 @@ Dodatak neće biti omogućen.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -3438,12 +3413,12 @@ p, li { white-space: pre-wrap; }
No input files to process.
-
The following files were not created:
{0}
-
@@ -3455,7 +3430,7 @@ p, li { white-space: pre-wrap; }
The command is still running.
Do you want terminate it anyway?
-
@@ -3478,7 +3453,7 @@ Do you want terminate it anyway?
%s not created.
-
@@ -3491,7 +3466,7 @@ Do you want terminate it anyway?
&Load into canvas when finished
-
Batch mode (for processing whole directory)
-
Recurse subdirectories
-
Select the raster file to save the results to
-
Select the color configuration file
-
Select the input file for Grid
-
Select the input file for Rasterize
-
Select the input file for Sieve
-
Select the input file for Warp
-
Select the mask file
-
Select the input directory with files to Warp
-
Select the output directory to save the results to
-
Output size or resolution required
-
The output file doesn't exist. You must set up the output size or resolution to create it.
-
Select the input file for Translate
-
Select the input directory with files to Translate
-
Translate - srcwin
-
Image coordinates (pixels) must be integer numbers.
-
Translate - prjwin
-
Image coordinates (geographic) must be numbers.
-
Select the input directory with raster files
-
Select where to save the TileIndex output
-
Convert paletted image to RGB
-
Select the input file for convert
-
Select the input directory with files for convert
-
Select the file to analyse
-
Select the input directory with files to Assign projection
-
Copy
@@ -3640,85 +3615,85 @@ Do you want terminate it anyway?
Select the input file for Polygonize
-
Select the files for VRT
-
Select where to save the VRT
-
VRT (*.vrt)
-
Select the input directory with files for VRT
-
Select the input file for Near Black
-
Select the input file
-
Select the input directory with files
-
Select the files to Merge
-
Error retrieving the extent
-
GDAL was unable to retrieve the extent from any file.
The "Use intersected extent" option will be unchecked.
-
Empty extent
-
The computed extent is empty.
Disable the "Use intersected extent" option to have a nonempty output.
-
Select where to save the Merge output
-
Select the input directory with files to Merge
-
{0} not created.
-
Select the files to analyse
-
Select the input file for Contour
-
Select where to save the Contour output
-
Select the input file for Proximity
-
Warning
@@ -3726,7 +3701,7 @@ Disable the "Use intersected extent" option to have a nonempty output.
Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
-
Finished
@@ -3742,11 +3717,11 @@ Disable the "Use intersected extent" option to have a nonempty output.
This raster already found in map canvas
-
Select where to save the Polygonize output
-
@@ -3754,12 +3729,12 @@ Disable the "Use intersected extent" option to have a nonempty output.
Select the extent by drag on canvas
-
or change the extent coordinates
-
Re-Enable
-
@@ -3830,7 +3805,7 @@ Disable the "Use intersected extent" option to have a nonempty output.
Path to the GDAL executables
-
Path to the GDAL python modules
-
GDAL help path
-
GDAL data path
-
GDAL driver path
-
A list of colon-separated (Linux and MacOS) or
@@ -3868,29 +3843,29 @@ and python executables.
MacOS users usually need to set it to something like
/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to python modules.
-
Useful to open local GDAL documentation instead of online help
when pressing on the tool dialog's Help button.
-
Select directory with GDAL executables
-
Select directory with GDAL python modules
-
Select directory with the GDAL documentation
-
@@ -3898,24 +3873,24 @@ when pressing on the tool dialog's Help button.
Build Virtual Raster (Catalog)
-
Use visible raster layers for input
-
Choose input directory instead of files
-
&Input files
-
Recurse subdirectories
-
&Output file
-
&Resolution
-
Highest
-
Lowest
-
&Source No Data
-
Se¶te
-
Allow projection difference
-
Clipper
-
&No data value
-
&Input file (raster)
-
Clipping mode
-
Extent
- Opseg
+
Mask layer
-
Create an output alpha band
-
Contour
-
&Output file for contour lines (vector)
-
I&nterval between contour lines
-
&Attribute name
-
If not provided, no elevation attribute is attached.
-
ELEV
-
Convert RGB image to paletted
-
Batch mode (for processing whole directory)
-
&Input file
- &Ulazna datoteka
+
Number of colors
-
Band to convert
-
DEM (Terrain models)
-
&Input file (DEM raster)
-
&Band
-
Compute &edges
-
Use Zevenbergen&&Thorne formula (instead of the Horn's one)
-
&Mode
-
Hillshade
-
Color relief
-
TRI (Terrain Ruggedness Index)
-
TPI (Topographic Position Index)
-
Roughness
-
Mode Options
-
Z factor (vertical exaggeration)
-
Scale (ratio of vert. units to horiz.)
-
Azimuth of the light
-
Altitude of the light
-
Slope expressed as percent (instead of as degrees)
-
Return trigonometric angle (instead of azimuth)
-
Return 0 for flat (instead of -9999)
-
Color configuration file
-
Matching mode
-
Exact color (otherwise "0,0,0,0" RGBA)
-
Nearest color
-
Add alpha channel
-
&Creation Options
-
Fill Nodata
-
&Input Layer
-
Search distance
-
Smooth iterations
-
Band to operate on
-
Validity mask
-
Do not use the default validity mask
-
Grid (Interpolation)
-
&Z Field
-
&Algorithm
-
Inverse distance to a power
-
Moving average
-
Nearest neighbor
-
Data metrics
-
Power
-
Smoothing
-
Radius1
-
Radius2
-
Max points
-
Min points
-
Raster info
-
Suppress GCP printing
-
Suppress metadata printing
-
Layer stack
-
Use intersected extent
-
Grab pseudocolor table from the first image
-
Near Black
-
How &far from black (or white)
-
Search for nearly &white (255) pixels instead of black ones
-
Build overviews (Pyramids)
-
Remove all overviews.
-
Clean
-
Polygonize (Raster to vector)
- Poligonizacija (raster u vektor)
+
&Output file for polygons (shapefile)
-
&Field name
-
DN
-
Use mask
-
Assign projection
- Dodijeli projekciju
+
WARNING: current projection definition will be cleared
-
Desired SRS
-
Output will be:
- new GeoTiff if input file is not GeoTiff
- overwritten if input is GeoTiff
-
Select...
- Odaberi...
+
Proximity (Raster distance)
-
&Values
-
&Dist units
-
&Max dist
-
&No data
-
&Fixed buf val
-
Rasterize (Vector to raster)
- Rasterizacija (vektor u raster)
+
&Input file (shapefile)
-
&Attribute field
-
&Output file for rasterized vectors (raster)
-
Keep existing raster size and resolution
-
Raster size in pixels
-
Raster resolution in map units per pixel
-
Horizontal
- Horizontalno
+
Vertical
- Vertikalno
+
Sieve
-
&Threshold
-
&Pixel connections
-
Raster tile index
-
Tile index field
-
location
-
Write absolute path
-
Skip files with different projection ref
-
Translate (Convert format)
- Prevođenje (konverzija formata)
+
&Target SRS
-
Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
-
Outsize
-
Assign a specified nodata value to output bands.
-
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
-
Expand
-
RGB
-
RGBA
-
Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
-
Srcwin
-
Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
-
Prjwin
-
Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
-
Sds
-
Warp (Reproject)
- Vitoperenje (reprojiciranje)
+
&Source SRS
-
&Resampling method
-
Near
-
Cubic spline
-
No data values
-
&Memory used for caching
-
Use m&ultithreaded warping implementation
-
&Output directory for contour lines (shapefile)
-
@@ -4889,15 +4864,15 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Layer CRS
-
Project CRS
-
Ellipsoid
-
Polygon centroids
@@ -4917,15 +4892,15 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Voronoi polygon
-
Buffer region
-
Lines to polygons
- Linije u poligone
+
Input line vector layer
@@ -4949,7 +4924,7 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Cancel
@@ -4968,28 +4943,27 @@ Odaberite veću toleranciju...
At least two features must have same attribute value!
Please choose another field...
-
One or more features in the output layer may have invalid geometry, please check using the check validity tool
-
Error loading output shapefile:
%s
- Pogreška pri učitavanju izlazne shape datoteke:
-%s
+
Created output shapefile:
%s
%s
-
Layer '{0}' updated
-
Error writing output shapefile.
@@ -5097,19 +5071,18 @@ Please choose another field...
No output created. File creation error:
%s
-
Created output shapefile:
%s
%s%s
-
Error loading output shapefile:
%s
- Pogreška pri učitavanju izlazne shape datoteke:
-%s
+
@@ -5119,7 +5092,7 @@ Upozorenja:
Symmetrical difference
-
@@ -5140,7 +5113,7 @@ Pogreška ulaznog CRS: Detektiran je različit ulazni koord. ref. sustav, rezult
Input CRS error: One or more input layers missing coordinate reference information, results may not be as expected.
-
@@ -5160,32 +5133,32 @@ Pogreška GEOS geoprocesiranja: Jedan ili više ulaznih elemenata nemaju valjanu
Launch Globe
-
Globe Settings
-
Unload Globe
-
Overlay data on a 3D globe
-
Settings for 3D globe
-
Unload globe
-
&Globe
-
@@ -5203,58 +5176,58 @@ Pogreška GEOS geoprocesiranja: Jedan ili više ulaznih elemenata nemaju valjanu
Heatmap
-
Creates a heatmap raster for the input point vector.
-
&Heatmap
-
GDAL driver error
-
Cannot open the driver for the specified format
-
Raster update error
-
Could not open the created raster for updating. The heatmap was not generated.
-
Creating heatmap
-
Abort
- Prekid
+
Heatmap generation aborted
-
QGIS will now load the partially-computed raster.
-
@@ -5262,37 +5235,37 @@ Pogreška GEOS geoprocesiranja: Jedan ili više ulaznih elemenata nemaju valjanu
Save Heatmap as:
-
No valid layers found!
-
Advanced options cannot be enabled.
-
Invalid output filename
-
Please enter a valid output file path and name.
-
Layer not found
-
Layer %1 not found.
-
@@ -5300,159 +5273,159 @@ Pogreška GEOS geoprocesiranja: Jedan ili više ulaznih elemenata nemaju valjanu
Heatmap Plugin
-
...
- ...
+
Input point layer
- Ulazni sloj točaka
+
Output raster
-
Output format
- Izlazni oblik
+
Radius
-
10
- 10
+
meters
-
map units
- jedinice mape
+
Rows
- Reci
+
Cell size X
-
Columns
- Kolone
+
Cell size Y
-
Use radius from field
-
Use weight from field
-
0.0
- 0.0
+
Decay ratio
-
Quartic (biweight)
-
Triangular
-
Uniform
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
Advanced
- Napredno
+
HelpEditionDialog
Outputs
-
HistoryDialog
Clear
- Očisti
+
Clear history and log
-
Confirmation
-
Are you sure you want to clear log?
-
Create test
-
@@ -5460,24 +5433,24 @@ Pogreška GEOS geoprocesiranja: Jedan ili više ulaznih elemenata nemaju valjanu
Dialog
-
Reload
-
Save
- Spremi
+
InfoViewer
DB Manager
- DB Upravitelj
+
@@ -5485,23 +5458,23 @@ Pogreška GEOS geoprocesiranja: Jedan ili više ulaznih elemenata nemaju valjanu
Form
- Obrazac
+
Symbol layer type
-
This layer doesn't have any editable properties
-
MainWindow
- &Edit
&Uredi
@@ -5521,1285 +5494,1285 @@ Pogreška GEOS geoprocesiranja: Jedan ili više ulaznih elemenata nemaju valjanu
Odabir
- Measure
Izmjeri
- &Decorations
&Dekoracije
- &Layer
S&loj
- New
Novo
- &Plugins
&Dodaci
- &Help
&Pomoć
- &Settings
Po&stavke
- &Raster
&Raster
- Vect&or
-
- &OpenStreetMap
-
- File
Datoteka
- Manage Layers
Upravljanje slojevima
- Digitizing
Digitaliziranje
- Advanced Digitizing
Napredno digitaliziranje
- Map Navigation
Navigacija po mapi
- Attributes
Atributi
- Plugins
Dodaci
- Help
Pomoć
- Raster
Raster
- Label
Oznaka
- Vector
Vektor
- Database
Baza podataka
- Web
Web
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Spremi kao sliku...
- &New Print Composer
&Novi print kompozitor
- Ctrl+P
Ctrl+P
- Composer Manager...
-
P&roject
-
&Open Recent
-
New From Template
-
- Preview Mode
-
- Paste Features as
-
- &New
- &Novo
+
- &Open...
-
- &Save
-
- Save &As...
-
- Exit QGIS
- Izađi iz QGIS
+
- Ctrl+Q
Ctrl+Q
- &Undo
&Vrati
- Ctrl+Z
Ctrl+Z
- &Redo
&Ponovi
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Izreži elemente
- Ctrl+X
Ctrl+X
- Copy Features
Kopiraj elemente
- Ctrl+C
Ctrl+C
- Paste Features
Zalijepi elemente
- Ctrl+V
Ctrl+V
- Add Feature
-
- Ctrl+.
Ctrl+.
- Move Feature(s)
Pomakni element(e)
- Reshape Features
Preoblikuj elemente
- Split Features
Razdvoji elemente
- Split Parts
-
- Delete Selected
Obriši odabrano
- Add Ring
Dodaj prsten
- Add Part
Dodaj dio
- Simplify Feature
Pojednostavni element
- Delete Ring
Izbriši prsten
- Delete Part
Izbriši dio
- Merge Selected Features
-
- Merge Attributes of Selected Features
-
- Node Tool
Alat za čvorove (node)
- Rotate Point Symbols
Rotacija simbola točaka
- Snapping Options...
Opcije snepiranja...
- Pan Map
Pomakni mapu
- Zoom In
Približi
- Ctrl++
Ctrl++
- Zoom Out
Udalji
- Ctrl+-
Ctrl+-
- Select Single Feature
+
+
+ Select Features by Rectangle
+
+
+ Select Features by Polygon
-
- Select Features by Freehand
-
- Select Features by Radius
-
- Deselect Features from All Layers
-
- Identify Features
Identificiraj elemente
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Izmjeri liniju
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Izmjeri površinu
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Mjeri kut
- Zoom Full
Prikaži sve
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Prikaži sloj
- Zoom to Selection
Prikaži odabrano
- Ctrl+J
Ctrl+J
- Zoom Last
Prikaži posljednje
- Zoom Next
Prikaži slijedeće
- Zoom Actual Size
Prikaži stvarnu veličinu
- Zoom to Native Pixel Resolution
Zumiraj na nativnu rezoluciju u pikselima
- Map Tips
Natuknice mape
- Show information about a feature when the mouse is hovered over it
Prikaži informacije o elementu kada je miš iznad njega
- New Bookmark...
Nova zabilješka...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Prikaži zabilješke
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Osvježi
- Text Annotation
Tekstualna anotacija
- Form Annotation
-
- Move Annotation
Pomakni oznaku
- Labeling
Označavanje
- Layer Labeling Options
-
- New Shapefile Layer...
Novi Shapefile sloj...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Novi SpatiaLite sloj...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Raster kalkulator...
- Add Vector Layer...
Dodaj vektorski sloj...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Dodaj rasterski sloj...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
-
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Dodaj SpatiaLite sloj...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
-
- Add Oracle Spatial Layer...
-
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
-
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Otvori atributnu tablicu
- Toggle Editing
-
- Toggles the editing state of the current layer
Uklj/isklj uređivanje trenutačnog sloja
- Save for Selected Layer(s)
-
- Save edits to current layer, but continue editing
Spremi uređeno u trenutnom sloju, no nastavi s uređivanjem
- Save As...
- Spremi kao...
+
- Add from Layer Definition File...
-
- Save As Layer Definition File...
-
- Normal
-
- Normal preview mode
-
- Simulate Photocopy (Grayscale)
-
- Simulate photocopy (grayscale)
-
- Simulate Fax (Mono)
-
- Simulate fax (mono)
-
- Simulate Color Blindness (Protanope)
-
- Simulate color blindness (protanope)
-
- Simulate Color Blindness (Deuteranope)
-
- Simulate color blindness (deuteranope)
-
- Set Scale Visibility of Layer(s)
-
- Remove Layer(s)
Ukloni sloj(eve)
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Postavi CRS-ove sloja/eva
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
-
- Properties...
Osobine...
- Query...
Upit...
- Add to Overview
Dodaj u Pregled
- Add All to Overview
Dodaj sve u Pregled
- Remove All from Overview
-
- Show All Layers
Prikaži sve slojeve
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Sakrij sve slojeve
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
-
- Open Field Calculator
-
- Add Delimited Text Layer...
-
- Add Delimited Text Layer
-
- New Vector Layer
- Novi vektorski sloj
+
- Paste features in clipboard into a new OGR vector layer.
-
- New Memory Vector Layer
-
- Paste features in clipboard into a new memory vector layer.
-
- Toggle Full Screen Mode
Uklj/isklj prikaz preko cijelog ekrana
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
- F5
+
- Ctrl+F
Ctrl+F
- F11
- F11
+
- Project Properties...
Osobine projekta...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Opcije...
- Custom CRS...
Prilagođeni CRS...
- Configure shortcuts...
Konfiguracija prečica...
- Local Histogram Stretch
-
- Stretch histogram of active raster to view extents
-
- Help Contents
Sadržaj Pomoći
- F1
F1
- API documentation
API dokumentacija
- QGIS Home Page
QGIS početna stranica
- Ctrl+H
Ctrl+H
- Check QGIS Version
Provjeri inačicu QGIS-a
- Check if your QGIS version is up to date (requires internet access)
Provjeri da li je QGIS najnovije verzije (zahtjeva vezu na internet)
- About
O programu
- QGIS Sponsors
QGIS sponzori
- Move Label
-
- Rotate Label
-
- Rotate Label
Ctl (Cmd) increments by 15 deg.
-
- Change Label
-
- Style Manager...
-
- Python Console
Python konzola
- Full histogram stretch
-
- Stretch Histogram to Full Dataset
-
- Customization...
-
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
-
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
-
- Embed layers and groups from other project files
-
- &Copyright Label
&Copyright oznaka
- Creates a copyright label that is displayed on the map canvas.
Stvara copyright oznaku koja se prikazuje u prikazu mape.
- &North Arrow
&Smjer sjevera
- "Creates a north arrow that is displayed on the map canvas"
-
- &Scale Bar
&Traka mjerila
- Creates a scale bar that is displayed on the map canvas
Stvara traku mjerila koja se prikazuje u prikazu mape
- Add WFS Layer...
Dodaj WFS sloj...
- Add WFS Layer
Dodaje WFS sloj
- Feature Action
-
- Run Feature Action
-
- Pan Map to Selection
-
- Touch zoom and pan
-
- Offset Curve
-
- Copy style
-
- Paste style
-
- Add WCS Layer...
-
- &Grid
-
- Grid
-
- Pin/Unpin Labels
-
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
Acts on all editable layers
-
- Highlight Pinned Labels
-
- New Blank Project
-
- Local Cumulative Cut Stretch
-
- Local cumulative cut stretch using current extent, default limits and estimated values.
-
- Full Dataset Cumulative Cut Stretch
-
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
-
- Show/Hide Labels
-
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
Acts on currently active editable layer
-
- Html Annotation
-
- Duplicate Layer(s)
-
- SVG annotation
-
- Save for All Layers
-
- Rollback for All Layers
-
- Cancel for All Layers
-
- Rollback for Selected Layer(s)
-
- Current Edits
-
- Cancel for Selected Layer(s)
-
- Save Layer Edits
-
-
- Rotate Feature(s)
-
-
- &Download data
-
+ &Import topology from XML
- Rotate Feature(s)
+
&Download data
+
+
+ &Import topology from XML
+
+
+ &Export topology to SpatiaLite
-
- Increase brightness
-
- Decrease brightness
-
- Increase contrast
-
- Decrease contrast
-
- Select By Expression
-
- Select features using an expression
-
- Need commercial support?
-
- DXF Export...
-
- Fill Ring
-
@@ -6807,76 +6780,76 @@ Acts on currently active editable layer
Manage connections
- Upravljanje vezama
+
Save to file
- Spremi u datoteku
+
Browse
- Traži
+
Load from file
- Učitaj iz datoteke
+
Load
-
Save
- Spremi
+
eXtensible Markup Language (*.xml *.XML)
-
Save connections
- Spremi veze
+
Load connections
- Učitaj veze
+
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
-
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -6884,411 +6857,411 @@ Acts on currently active editable layer
MetaSearch
-
Search
- Traži
+
Find
-
Set global
-
Map extent
-
-180
-
90
- 90
+
Records
-
-90
-
180
- 180
+
From
-
Keywords
- Ključne riječi
+
Results
- Rezultati
+
>
- >
+
<<
-
Add WCS
-
Add WMS/WMTS
-
<
- <
+
Add WFS
-
Abstract
- Sažetak
+
Double click to see full record information
-
Type
-
Title
- Naslov
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
-
Edit
-
Delete
-
Save
- Spremi
+
Add default services
-
Load
-
Settings
- Postavke
+
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
- Učitavanje veza
+
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
ModelerDialog
Search...
- Pretraži...
+
Message
- Poruka
+
There are unsaved changes in model. Close modeler without saving?
-
Empty model
-
Save Model As Image
-
PNG files (*.png *.PNG)
-
Warning
- Upozorenje
+
Please enter group and model names before saving
-
Save Model
-
Processing models (*.model)
-
I/O error
-
Unable to save edits. Reason:
%s
-
Can't save model
-
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
-
Model was correctly saved.
-
Open Model
-
Could not open model
-
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
- Parametri
+
MultipleInputDialog
Select all
- Odaberi sve
+
Clear selection
- Ukloni oznaku odabira
+
Toggle selection
-
@@ -7296,107 +7269,107 @@ See the log for more information.
Create a new Catalogue connection
-
Name
-
URL
- URL
+
Save connection
- Spremi vezu
+
Both Name and URL must be provided
-
Overwrite %s?
-
NotSupportedDbType
%s is not supported yet
-
NumberInputDialog
[Enter your formula here]
-
Values from data layers extents
-
Min X
-
Max X
-
Min Y
-
Max Y
-
Cellsize
-
Values from raster layers statistics
-
Mean
- Srednje
+
Std. deviation
-
Max value
-
Min value
-
Values from QGIS map canvas
-
Current extent
- Trenutni opseg
+
Full extent of all layers in map canvas
-
Wrong expression
-
The expression entered is not correct
-
@@ -7441,109 +7414,109 @@ See the log for more information.
OutputSelectionPanel
[Save to temporary file]
-
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
- Spremi datoteku
+
Select directory
- Odaberi direktorij
+
PGDatabase
&Table
- &Tablica
+
Run &Vacuum Analyze
-
Sorry
-
Select a TABLE for vacuum analyze.
-
PGTable
Table rule
-
PointsInPolygonThread
point count field
-
PostGisDBPlugin
There is no defined database connection "%s".
-
PrepareAPIDialog
Error
- Pogreška
+
Done
- Gotovo
+
Processing
Processing
-
Toolbox
-
Graphical modeler
-
History and log
- Povijest i zapisi
+
Options and configuration
-
&Results viewer
-
&Commander
-
@@ -7551,39 +7524,39 @@ See the log for more information.
Processing Toolbox
-
Enter algorithm name to filter list
- Unesi naziv algoritma za listu filtera
+
Search...
- Pretraži...
+
Execute
-
Execute as batch process
-
Edit rendering styles for outputs
-
Recently used algorithms
-
Python
Python warning
-
An error has occured while executing Python code:
@@ -7607,23 +7580,23 @@ See the log for more information.
Couldn't load plugin '%s' from ['%s']
-
Couldn't load plugin %s
-
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
-
Error while unloading plugin %s
-
@@ -7634,357 +7607,357 @@ See the log for more information.
Clear console
-
Compile APIs
-
Saving prepared file...
-
Saved
-
Done
- Gotovo
+
Error preparing file...
-
Hide Editor
-
Check Syntax
-
Run selected
-
Run Script
-
Undo
- Poništi
+
Redo
- Ponovi
+
Find Text
-
Cut
- Izreži
+
Copy
- Kopiraj
+
Paste
- Zalijepi
+
Comment
- Komentar
+
Uncomment
-
Share on codepad
-
Hide/Show Object Inspector
-
Select All
- Odaberi sve
+
Settings
- Postavke
+
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
-
Connection error:
-
[Temporary file saved in {0}]
-
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
-
You have to save the file before running it.
-
Python Console: Save file
-
Script was correctly saved.
-
Click on button to restore all tabs from last session.
-
Restore tabs
-
Close
- Zatvori
+
List all tabs
-
New Editor
-
Close Tab
-
Close All
-
Close Others
-
Save As
-
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
-
The file <b>'{0}'</b> has been modified, save changes?
-
Unable to restore the file:
{0}
-
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
-
Show Editor
-
Enter Selected
-
Object Inspector
-
Open file
- Otvori datoteku
+
Save
- Spremi
+
Save As...
- Spremi kao...
+
Run script
-
Show editor
-
Import Class
-
Import Processing class
-
Enter text to find...
-
Find Next
-
Find Previous
-
Case Sensitive
-
Whole Word
-
Wrap Around
-
Open File
- Otvori datoteku
+
Save Error
-
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
-
History saved successfully.
-
Session and file history cleared successfully.
-
History cleared successfully.
-
Command History
-
Show
-
Clear File
-
Clear Session
-
Python Console - Command History
-
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
-
Import PyQt.QtGui class
-
Run command
-
Help
- Pomoć
+
@@ -7992,12 +7965,12 @@ See the log for more information.
meters
-
feet
-
degrees
-
<unknown>
-
nautical miles
-
@@ -8024,27 +7997,27 @@ See the log for more information.
Unable to initialize
QOCISpatialDriver
-
Unable to logon
-
Unable to begin transaction
-
Unable to commit transaction
-
Unable to rollback transaction
-
@@ -8054,42 +8027,42 @@ See the log for more information.
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to goto next
-
Unable to alloc statement
-
Unable to prepare statement
-
Unable to get statement type
-
Unable to bind value
-
Unable to execute statement
-
@@ -8116,31 +8089,31 @@ See the log for more information.
Procjena derivacija normala...
- minidump written to %1
-
- writing of minidump to %1 failed (%2)
-
- creation of minidump to %1 failed (%2)
-
- Crash dumped
-
QGIS starting in non-interactive mode not supported.
You are seeing this message most likely because you have no DISPLAY environment variable set.
-
No active vector layer
-
To select features, choose a vector layer in the legend
-
Python is not enabled in QGIS.
-
Plugin "%1" is not compatible with this version of QGIS.
It will be disabled.
-
Loaded %1 (package: %2)
-
Library name is %1
-
Failed to load %1 (Reason: %2)
-
Attempting to resolve the classFactory function
-
Loaded %1 (Path: %2)
-
Unable to find the class factory for %1.
-
Plugin %1 did not return a valid type and cannot be loaded
-
Could not open CRS database %1
Error(%2): %3
-
Generated CRS
A CRS automatically generated from layer info get this prefix for description
Stvoreni CRS
@@ -8286,17 +8260,17 @@ Error(%2): %3
Saved user CRS [%1]
-
Imported from GDAL
-
Can't open database: %1
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
-
m²
-
km²
-
acres
-
sq. NM
-
NM
-
Cannot convert '%1' to double
-
Cannot convert '%1' to int
-
Cannot convert '%1' to DateTime
-
Cannot convert '%1' to Date
-
Cannot convert '%1' to Time
-
Cannot convert '%1' to Interval
-
- Cannot convert '%1' to boolean
-
- Domain max must be greater than domain min
-
- Exponent must be greater than 0
-
- Invalid regular expression '%1': %2
-
- Index is out of range
-
- Cannot convert '%1:%2:%3' to color
-
- Cannot convert '%1:%2:%3:%4' to color
-
- "%1" is not a valid color ramp
-
- Cannot convert '%1:%2:%3:%4:%5' to color
-
- function help for %1 missing
-
- Operators
- Operatori
+
- Fields and Values
-
- Math
-
- Conversions
-
- Conditionals
-
second|seconds
list of words separated by | which reference years
-
minute|minutes
list of words separated by | which reference minutes
-
hour|hours
list of words separated by | which reference minutes hours
-
day|days
list of words separated by | which reference days
-
week|weeks
wordlist separated by | which reference weeks
-
month|months
list of words separated by | which reference months
-
year|years
list of words separated by | which reference years
-
- Date and Time
-
- String
-
- Color
-
- Geometry
Geometrija
- Record
-
- No root node! Parsing failed?
-
- (no root)
-
- Unary minus only for numeric values.
-
- Can't preform /, *, or % on DateTime and Interval
-
- [unsupported type;%1; value:%2]
-
- Column '%1' not found
-
Exception: %1
-
GEOS
-
GEOS prior to 3.2 doesn't support GEOSInterpolate
-
ring %1 with less than four points
-
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- linija %1 sadrži %n dvostruki čvor na %2
- linija %1 sadrži %n dvostruka čvora na %2
- linija %1 sadrži %n dvostruka čvora na %2
-
+ linija %1 sadrži %n dvostruki čvor na %2 linija %1 sadrži %n dvostruka čvora na %2 linija %1 sadrži %n dvostruka čvora na %2
GEOS error:could not produce geometry for GEOS (check log window)
-
GEOS error:%1
-
polygon %1 has no rings
-
Unknown geometry type %1
-
Geometry validation was aborted.
-
Geometry has %1 errors.
-
Geometry is valid.
-
Console
-
infinite
-
Unable to instantiate the data provider plugin %1
-
Failed to load %1: %2
-
created field %1 not found (OGR error: %2)
-
Invalid variant type for field %1[%2]: received %3 with type %4
-
OGR
- OGR
+
no available replacement for internal fieldname ogc_fid found
-
Reserved attribute name ogc_fid replaced with %1
-
By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
Feature geometry not imported (OGR error: %1)
-
Feature creation error (OGR error: %1)
-
Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
-
Feature write errors:
-
Stopping after %1 errors
-
Only %1 of %2 features written.
-
Arc/Info ASCII Coverage
-
Atlas BNA
-
Comma Separated Value
-
DBF file
-
FMEObjects Gateway
-
New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
Limit the number of coordinate pairs per line in multiline format.
-
Set the number of decimal for coordinates. Default value is 10.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
Set to YES to resize fields to their optimal size.
-
DBF File
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
GeoJSON
-
whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
GeoRSS
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
If not specified, GML2 will be used.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
Geography Markup Language [GML]
-
Generic Mapping Tools [GMT]
-
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
GPS eXchange Format [GPX]
-
INTERLIS 1
-
INTERLIS 2
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Keyhole Markup Language [KML]
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Mapinfo TAB
-
Mapinfo MIF
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Microstation DGN
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
S-57 Base file
-
Spatial Data Transfer Standard [SDTS]
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
SQLite
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
SpatiaLite
-
AutoCAD DXF
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
Geoconcept
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
ESRI FileGDB
-
Cannot overwrite a OGR layer in place
-
Failed to transform, writing stopped. (Exception: %1)
-
Unable to load %1 provider
-
Provider %1 has no %2 method
-
Loaded from Provider
-
Loading of layer failed
-
Creation error for features from #%1 to #%2. Provider errors was:
%3
-
Import was canceled at %1 of %2
-
Vector import
-
Only %1 of %2 features written.
-
Reading raster part %1 of %2
-
Building Pyramids...
-
Building pyramids failed - write access denied
-
Write access denied. Adjust the file permissions and try again.
- Njie dopušteno pisanje. Podesite dozvole datoteke i pokušajte ponovno.
+
Building pyramids failed.
- Izgradnja piramida nije uspjela.
+
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
- Izgradnja piramidalnih pregleda nije podržaan za ovaj tip rastera.
+
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
- Izgradnja piramidalnih pregleda nije podržana za slojeve s JPEG kompresijom i vašom trenutačnom libtiff bibliotekom.
+
Multiband color
-
Paletted
-
Singleband gray
-
Singleband pseudocolor
-
Singleband color data
-
All Ramps
-
Rule-based
-
Point displacement
-
Inverted polygons
-
Simple line
-
Marker line
-
Simple marker
-
SVG marker
-
Font marker
-
Ellipse marker
-
Vector Field marker
-
Simple fill
-
Gradient fill
-
Shapeburst fill
-
SVG fill
-
Centroid fill
-
Line pattern fill
-
Point pattern fill
-
<html>QGIS rocks!</html>
-
Raster Histogram
-
Pixel Value
-
Frequency
-
Internal Compass
-
Shows a QtSensors compass reading
-
Version 0.9
- Verzija 0.9
+
Version 0.1
@@ -9832,6 +9803,7 @@ Only %1 of %2 features written.
Layers
Slojevi
@@ -9929,12 +9901,12 @@ Only %1 of %2 features written.
Could not reproject view extent: %1
-
Could not reproject layer extent: %1
-
Fitting a projective transform requires at least 4 corresponding points.
-
Globe
-
Overlay data on a 3D globe
-
Heatmap
-
Creates a Heatmap raster for the input point vector
-
OfflineEditing
-
Allow offline editing and synchronizing with database
-
Road graph plugin
-
It solves the shortest path problem.
-
Is disjoint
-
Shapefile to PostgreSQL/PostGIS Import Tool
Alat za uvoz Shape datoteka u PostgreSQL/PostGIS
+
+ SQL Anywhere plugin
+
+
+ Store vector layers within a SQL Anywhere database
+
Zonal statistics plugin
-
A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
-
Cannot open GDAL MEM dataset %1: %2
-
Cannot GDALCreateGenImgProjTransformer:
-
Cannot inittialize GDALWarpOperation :
-
Cannot ChunkAndWarpImage: %1
-
GDAL/OGR VSIFileHandler
-
This raster file has no bands and is invalid as a raster layer.
-
Cannot get GDAL raster band: %1
-
Nearest Neighbour
- Najbliži susjed
+
Average
- Prosječno
+
Gauss
-
Cubic
- Kubično
+
Mode
- Mod
+
None
- Nijedan
+
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
GQIS ne može pronaći GRASS instalaciju.
Želite li odrediti put (GISBASE) do vaše GRASS instalacije?
@@ -10525,7 +10507,7 @@ Would you like to specify path (GISBASE) to your GRASS installation?
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
Cannot open GISRC file
-
command: %1 %2
-
Cannot run module
-
Cannot get map info
-
Cannot get colors
-
Loading of the MSSQL provider failed
-
Unsupported type for field %1
-
Creation of fields failed
-
OGR[%1] error %2: %3
- OGR[%1] greška %2: %3
+
Unable to create the datasource. %1 exists and overwrite flag is false.
-
Unable to get driver %1
-
Arc/Info Binary Coverage
-
DODS
-
OpenFileGDB
-
ESRI Personal GeoDatabase
-
ESRI ArcSDE
-
ESRI Shapefiles
-
GeoPackage
-
Grass Vector
-
Informix DataBlade
-
Ingres
-
Mapinfo File
-
MySQL
-
MSSQL
-
Oracle Spatial
-
ODBC
-
OGDI Vectors
-
PostgreSQL
- PostgreSQL
+
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
UK. NTF2
-
U.S. Census TIGER/Line
-
VRT - Virtual Datasource
-
X-Plane/Flightgear
-
Duplicate field (10 significant characters): %1
-
Creating the data source %1 failed: %2
-
Unknown vector type of %1
-
Creation of OGR data source %1 failed: %2
-
field %1 with unsupported type %2 skipped
-
creation of field %1 failed
-
Couldn't create file %1.qpj
-
-
- Fetching features failed.
-SQL:%1
-Error: %2
-
Fetching features failed.
+SQL:%1
+Error: %2
+
+
+ Oracle
-
Connection to database failed
-
No owner name found
-
Creation of data source %1 failed:
%2
-
Loading of the layer %1 failed
-
Field name clash found (%1 not remappable)
-
%1 not owner of the table %2.
-
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Unable to delete layer %1.%2:
%3
-
Unable to clean metadata %1.%2:
%3
-
no result buffer
-
Fetching from cursor %1 failed
Database error: %2
-
PostGIS
- PostGIS
+
Infinite filter rectangle specified
-
Unable to delete layer %1:
%2
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
Save style in database
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
SQLite error: %2
SQL: %1
-
SQLite error getting feature: %1
-
creation of data source %1 failed. %2
-
loading of the layer %1 failed
-
creation of fields failed
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints [%1]
-
Unable to delete table %1
-
Unable to delete table %1:
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
The extra plugin path '%1' does not exist !
-
Couldn't set SIP API versions.
-
Undefined
- Nedefinirano
+
Hidden
- Skriveno
+
Title
- Naslov
+
Group
- Grupiraj
+
Subgroup
-
Symbol
- Simbol
+
Symbol label
-
Topology Checker
-
A Plugin for finding topological errors in vector layers
-
Using fix %1.
-
Topology plugin
-
intersecting geometries
-
features too close
-
point not covered by segment
-
segment too short
-
invalid geometry
-
dangling end
-
duplicate geometry
-
pseudo node
-
overlaps
-
gaps
-
point not covered
-
line ends not covered by point
-
point not in polygon
-
polygon does not contain point
-
multipart feature
-
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Save style to DB (%1)
-
Could not save symbology because:
%1
- Nemoguće snimiti simbologiju zbog:
-%1
+
Attribute index %1 out of bounds [0;%2]
-
Error
- Pogreška
+
Layer
- Sloj
+
Feature ID
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
- Dom Iznimka
+
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- Kazalo
+
QSpatiaLiteDriver
- Error opening database
-
- Error closing database
-
- Unable to begin transaction
-
- Unable to commit transaction
-
- Unable to rollback transaction
-
@@ -11493,37 +11479,37 @@ Response was:
Unable to fetch row
-
No query
-
- Unable to execute statement
-
- Unable to execute multiple statements at a time
-
- Unable to reset statement
-
- Unable to bind parameters
-
- Parameter count mismatch
-
@@ -11698,61 +11684,61 @@ Response was:
QGIS spreman!
- Minimize
Smanji
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Smanjuje aktivni prozor na traku
- Zoom
Približi
- Toggles between a predefined size and the window size set by the user
Prelazak između preddefinirane veličine prozora i korisnički postavljene
- Bring All to Front
Dovedi sve u prvi plan
- Bring forward all open windows
Dovedi naprijed sve otvorene prozore
- Current Edits
-
- Error
Pogreška
- Failed to open Python console:
Neuspješno otvaranje Python konzole:
@@ -11776,138 +11762,138 @@ Molimo konktaktirajte razvijatelje.
QGIS - %1 ('%2')
- Panels
Paneli
- Toolbars
Trake s alatima
- Window
Prozor
- &Database
Baza po&dataka
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
Traka napredka koja prikazuje status prikazivanja slojeva i ostalih vremenski osjetljivih operacija
- Toggle extents and mouse position display
Uklj/isklj opseg (extents) i prikaz pozicije miša
- Coordinate:
Koordinate:
- Current map coordinate
Trenutačne koordinate na mapi
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Prikazuje koordinate s karte na treutnoj poziciji pokazivača. Prikaz se osvježava kontinuirano kako se miš pokreće. Također omogućava centiranje prikaza na danu poziciju. Oblik je dužina,širina ili y,x
- Current map coordinate (lat,lon or east,north)
Trenutne koordinate na karti (dužina, širina ili y,x)
- Scale
Mjerilo
- Current map scale
Trenutačno mjerilo mape
- Displays the current map scale
Prikazuje trenutačno mjerilo mape
- Current map scale (formatted as x:y)
Trenutačno mjerilo mape (formatirano kao x:y)
- Render
Prikaži
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Kada je uključeno slojevi mape se prikazuju prema navigacijskim naredbama i ostalim događajima. Ako nije uključeno, ništa se ne prikazuje. Na taj način možete dodati velik broj slojeva i simbola prije prikazivanja.
- Toggle map rendering
Uklj/isklj prikazivanje mape
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Ova ikona prikazuje je li omogućena transformacija koordinata "u letu". Kliknite na ikonu kako biste otvorili dijalog za promjenu osobina projekta i izmjenili postavke.
- CRS status - Click to open coordinate reference system dialog
CRS status - kliknite za otvaranje dijaloga koord. referentnog sustava
- Ready
Spreman
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Prikaz pregledne mape. Na ovom se prikazuje lokatorska mapa koja prikazuje opseg trenutačne mape. Trenutačni opseg se prikazuje kao crveni pravokutnik. svaki sloj na mapi može se dodati i pregledni prikaz.
- Overview
Pregled
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Legenda mape koja prikazuje sve slojeve koji se prikazuju. Kliknite na kvadratić za označavanje za uklj. ili isklj. Dvostruki klik na sloj unutar legende za postavljanje izgleda i ostalih osobina.
- Layers
Slojevi
- Map layer list that displays all layers in drawing order.
Popis slojeva mape koji prikazuje sve slojeve redoslijedom iscrtavanja.
- Layer order
Redoslijed slojeva
@@ -11917,1302 +11903,1278 @@ Molimo konktaktirajte razvijatelje.
Privatni qgis.db
- < Blank >
< Blank >
- QGIS version
GQIS inačica
- QGIS code revision
QGIS code revision
-
- Compiled against Qt
-
-
- Running against Qt
-
-
- Compiled against GDAL/OGR
-
Running against GDAL/OGR
- Compiled against Qt
+
- Running against Qt
+
+
+ Compiled against GDAL/OGR
+
+
+ Running against GDAL/OGR
+
+
+ PostgreSQL Client Version
Inačica PostgreSQL klijenta
- No support.
Nema podrške.
- SpatiaLite Version
SpatiaLite inačica
- QWT Version
QWT inačica
- PROJ.4 Version
PROJ.4 inačica
- QScintilla2 Version
QScintilla2 inačica
- This copy of QGIS writes debugging output.
Ova kopija QGIS-a zapisuje izlazne podatke za debuggiranje.
- %1 doesn't have any layers
%1 nema slojeva
- Invalid Data Source
Nevaljani izvor podataka
- %1 is not a valid or recognized data source
%1 ije valjani ili prepoznati izvor podataka
- Vector
Vektor
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
-
- %1 is an invalid layer - not loaded
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
- QGIS files
-
- No legend entries selected
-
- Select the layers and groups you want to remove in the legend.
-
- Remove layers and groups
-
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
- Do you want to save the current project? %1
-
- Invalid Layer
Nevaljani sloj
- SpatiaLite
-
- Cannot get SpatiaLite select dialog from provider.
-
- Delimited Text
-
- Cannot get Delimited Text select dialog from provider.
-
- MSSQL
-
- Cannot get MSSQL select dialog from provider.
-
- Oracle
-
- Cannot get Oracle select dialog from provider.
-
- WMS
WMS
- Cannot get WMS select dialog from provider.
-
- WCS
-
- Cannot get WCS select dialog from provider.
-
- WFS
-
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
-
- Auto-open Project
-
- Failed to open: %1
-
- Not valid project file: %1
-
- Project failed to open: %1
-
- Default template has been reopened: %1
-
- File not found: %1
-
- Calculating...
-
- Abort...
Prekid...
- Choose a QGIS project file to open
Odaberite QGIS projekt za otvaranje
- Loading project: %1
-
- Unable to open project
Ne mogu otvoriti projekt
- Security warning
-
- project macros have been disabled.
-
- Enable macros
-
- Project loaded
-
- Choose a QGIS project file
Odaberite datoteku QGIS projekta
- Saved project to: %1
Projekt spremljen u: %1
- Unable to save project %1
Ne mogu spremiti projekt %1
- Choose a file name to save the QGIS project file as
Odaberite naziv datoteke za spremanje QGIS projekta
- Unable to load %1
-
- Choose a file name to save the map image as
Odaberite naziv datoteke za spremanje slike mape
- Saved map image to %1
Slika mape spremljena u %1
- Default system font substituted.
-
- Labeling
Označavanje
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
-
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
- Klasifikacija
+
Range
-
Unique Values
-
File Name
- Naziv datoteke
+
Value Map
-
Enumeration
- Pobrojanje
+
Hidden
- Skriveno
+
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
-
Web View
-
Color
-
Relation Reference
-
Date/Time
-
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
-
- The project file is not writable.
-
- DXF export completed
-
- DXF export failed
-
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
-
- Show more
-
- Labeling Options
-
- Please select a vector layer first
-
- Layer labeling settings
Postavke označavanja sloja
- Reading raster
-
- Cannot write raster error code: %1
-
- Saving done
Spremanje završeno
- Export to vector file has been completed
Izvoz u vektorsku datoteku je završen
- Save error
Pogreška spremanja
- Export to vector file failed.
Error: %1
Izvoz u vektorsku datoteku nije uspio.
Pogreška: %1
- No Layer Selected
Nema odabranih slojeva
- To delete features, you must select a vector layer in the legend
Kako bi ste obrisali element morate odabrati vektorski sloj u legendi
- No Vector Layer Selected
Nije odabran vektorski sloj
- Deleting features only works on vector layers
Brisanje elemenata radi samo s vektorskim slojevima
- Provider does not support deletion
Pružatelj ne podržava brisanje
- Data provider does not support deleting features
Pružatelj podataka ne podržava brisanje elemenata
- Layer not editable
Sloj se ne može uređivati
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Trenutni sloj se ne može uređivati. Odaberite 'Započni uređivanje' u traci digitaliziranja.
-
- No Features Selected
-
-
- The current layer has not selected features
-
No Features Selected
+
+
+ The current layer has not selected features
+
+
+ Delete features
Brisanje elemenata
- Delete %n feature(s)?
number of features to delete
-
- Izbrisati %n element?
- Izbrisati %n elementa?
- Izbrisati %n elemenata?
-
+ Izbrisati %n element? Izbrisati %n elementa? Izbrisati %n elemenata?
- Features deleted
Elementi izbrisani
- Problem deleting features
Problem pri brisanju elemenata
- A problem occured during deletion of features
Dogodio se problem pri brisanju elemenata
- %n feature(s) deleted.
number of features deleted
-
-
+
- Merging features...
Spajanje elemenata...
- Abort
Prekid
- Create unique print composer title
-
- (title generated if left empty)
-
- Composer title
-
- Title can not be empty!
-
- Title already exists!
-
- Composer %1
Kompozitor %1
- copy
-
- No active layer
Nema aktivnog sloja
- No active layer found. Please select a layer in the layer list
Nije pronađen aktivni sloj. Odaberite sloj s popisa slojeva
- Active layer is not vector
Aktivni sloj nije vektorski
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Alat za spajanje elemenata radi samo na vektorskim slojevima. Odaberite vektorski sloj s popisa slojeva
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Spajanje elemenata može se izvršiti samo za slojeve u modu uređivanja. Za korištenje odite na Sloj -> Uklj/isklj uređivanje
- Not enough features selected
-
- The merge tool requires at least two selected features
Alat za spajanje zahtjeva barem dva odabrana elementa
- Merged feature attributes
-
- Merge failed
Spajanje nije uspjelo
- An error occured during the merge operation
Došlo je do pogreške pri operaciji spajanja
- Union operation canceled
-
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
Operacija ujedinjavanja (union) rezultirala bi tipom geometrije koji nije kompatibilan s trenunim slojem, te je prekinuta
- Merged features
Spojeni elementi
- No active vector layer
-
- To select features, choose a vector layer in the legend
-
- Features cut
Izrezani elementi
- Features pasted
Zalijepljeni elementi
- Paste features
-
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
-
- New memory layer name
-
- Layer name
Naziv sloja
- No features in clipboard.
-
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
-
- Cannot create field %1 (%2,%3)
-
- Cannot copy style: %1
-
- Cannot parse style: %1:%2:%3
-
- Cannot read style: %1
-
- Start editing failed
Neuspješno započeto uređivanje
- Provider cannot be opened for editing
Pružatelj se ne može otvoriti za uređivanje
- Stop editing
Zaustavi uređivanje
- Do you want to save the changes to layer %1?
Želite li spremiti izmjene sloja %1?
- Problems during roll back
Problemi tokom vraćanja (roll back)
- Could not %1 changes to layer %2
Errors: %3
-
- rollback
-
- cancel
-
- Save
Spremi
- all
-
- Rollback
-
- Cancel
Prekid
- Current edits
-
- %1 current changes for %2 layer(s)?
-
- copy
-
- Plugin layer
-
- Memory layer
-
- Duplicate layer:
-
- %1 (duplication resulted in invalid layer)
-
- Set scale visibility for selected layers
-
-
- Couldn't load Python support library: %1
-
Couldn't load Python support library: %1
+
+
+ Couldn't resolve python support library's instance() symbol.
-
- Python support ENABLED :-)
-
- There is a new version of QGIS available
Dostupna je nova verzija QGIS-a
- You are running a development version of QGIS
Vi koristite razvojnu verziju QGIS-a
- You are running the current version of QGIS
Vi koristite najnoviju verziju QGIS-a
- Would you like more information?
Želite li više informacija?
- QGIS Version Information
Informacije o verziji QGIS-a
- QGIS - Changes since last release
QGIS - Izmjene od prethodne inačice
- Unable to get current version information from server
Ne mogu dohvatiti najnoviju verziju sa servera
- Connection refused - server may be down
Veza odbijena - server je možda pao
- QGIS server was not found
QGIS server nije pronađen
- Unknown network socket error: %1
Nepoznata network socket pogreška: %1
- Unable to communicate with QGIS Version server
%1
Nije moguće komunicirati s QGIS Version serverom
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
-
- To change brightness or contrast, you need to have a raster layer selected.
-
- en
documentation language
-
- Layer is not valid
Sloj nije valjan
- The layer %1 is not a valid layer and can not be added to the map
Sloj %1 nije valjan i ne može se dodati na mapu
- The layer is not a valid layer and can not be added to the map
Sloj nije valjan i ne može se dodati na mapu
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
- Save?
Spremiti?
- Current CRS: %1 (OTFR enabled)
-
- Current CRS: %1 (OTFR disabled)
-
- Map coordinates for the current view extents
Koordinate mape za trenutačni opseg prikaza
- Map coordinates at mouse cursor position
Koordinate mape na poziciji kursora
- Extents:
Opseg (extents):
- Maptips require an active layer
Natuknice (maptips) zahtjevaju aktivni sloj
- %n feature(s) selected on layer %1.
number of selected features
-
- %n element odabran na sloju %1.
- %n elementa odabrano na sloju %1.
- %n elemenata odabrano na sloju %1.
-
+ %n element odabran na sloju %1. %n elementa odabrano na sloju %1. %n elemenata odabrano na sloju %1.
- Open a GDAL Supported Raster Data Source
Otvorite GDAL podržani rasterski izvor podataka
- Error adding valid layer to map canvas
-
- Raster layer
-
- %1 is not a supported raster data source
%1 nije podržani rasterski izvor podataka
- Unsupported Data Source
Nepodržani izvor podataka
- Exit QGIS
Izađi iz QGIS
- Do you really want to quit QGIS?
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Ova datoteka projekta snimljena je starijom verzijom QGIS-a. Pri snimanju QGIS će ju osvježiti na najnoviju verziju, i moguće je da neće biti čitljiva za starije verzije.<p>Iako razvojni inženjeri pokušavaju održati kompatibilnost neke informacije iz starije datoteke mogu se izgubiti. Kako bismo unaprijedili kvalitetu QGIS-a molimo da ispuniti izvješće o bugu na %3. Priložite staru projektnu datoteku i navedite verziju QGIS-a s kojom ste otkrili pogrešku.<p>Kako biste uklonili ovo upozorenje prilikom otvaranja starije datoteke uklonite oznaku iz kvadratića '%5' u izborniku %4.<p>Verzija projektne datoteke: %1<br>Trenutna verzija QGIS-a: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Postavke:Opcije:Općenito</tt>
- Warn me when opening a project file saved with an older version of QGIS
Upozori me pri otvaranju projektne datoteke spremljene starijom verzijom QGIS-a
- Project file is older
Datoteka projekta je starija
- This project file was saved by an older version of QGIS
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
-
- Warning
Upozorenje
- This layer doesn't have a properties dialog.
Ovaj sloj nema dijalog s osobinama.
- Authentication required
Zahtjeva se autentikacija
- Proxy authentication required
Potrebna proxy autentikacija
- SSL errors occured accessing URL %1:
Došlo je do SSL pogrešaka pri pristupanju URL %1:
-
Always ignore these errors?
-
- %n SSL errors occured
number of errors
-
-
+
@@ -13220,7 +13182,7 @@ Always ignore these errors?
Attributes changed
-
@@ -13238,20 +13200,20 @@ Always ignore these errors?
License
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
-
QGIS is licensed under the GNU General Public License
-
Essen (Germany), Developer meeting 2012
-
<p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
-
Invalid field name. This field name is reserved and cannot be used.
-
@@ -13353,7 +13315,7 @@ p, li { white-space: pre-wrap; }
Add column
- Dodaj kolonu
+
Create attribute index on join field
-
Cache join layer in virtual memory
-
@@ -13420,7 +13382,7 @@ p, li { white-space: pre-wrap; }
Add tab or group for %1
-
@@ -13428,27 +13390,27 @@ p, li { white-space: pre-wrap; }
Dialog
-
Create category
-
as
-
a tab
-
a group in container
-
@@ -13474,7 +13436,7 @@ p, li { white-space: pre-wrap; }
Fixed map position
-
&Expand All
-
&Collapse All
-
&Remove
- &Ukloni
+
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Duplicate
-
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As...
- Spremi kao...
+
Save As Layer Definition File...
-
&Filter...
-
&Properties
-
Copy Style
-
Paste Style
-
QgsApplication
- Exception
Iznimka
- unknown exception
-
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13615,65 +13577,65 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
-
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
Ne mogu otvoriti qgis.db
- Migration of private qgis.db failed.
%1
Migracija privatne qgis.db nije uspjela. %1
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
- Kompozer
+
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
@@ -13682,35 +13644,35 @@ User DB Path: %9
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Expression based filename
-
Atlas preview
-
No matching atlas features found!
-
Expression based filter
-
@@ -13718,37 +13680,37 @@ Parser error:
Atlas Generation
-
Generate an atlas
-
Configuration
-
Coverage layer
-
Hidden coverage layer
-
Sort by
-
Sort direction
-
Filter with
-
Single file export when possible
-
Output filename expression
-
@@ -13789,7 +13751,7 @@ Parser error:
Insert expression
-
Echo attribute's value
-
Run an application
-
Get feature id
-
Selected field's value (Identify features tool)
-
Clicked coordinates (Run feature actions tool)
-
Search on web based on attribute's value
-
@@ -13852,7 +13814,7 @@ Parser error:
This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
-
Add default actions
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Inserts an expression into the action
-
Insert expression...
-
Inserts the selected field into the action
-
Add to action list
-
Update selected action
-
@@ -14044,7 +14006,7 @@ Parser error:
Feature Attributes
-
@@ -14052,7 +14014,7 @@ Parser error:
Attributes changed
-
@@ -14092,7 +14054,7 @@ Parser error:
Insert NULL value on top
-
@@ -14100,12 +14062,12 @@ Parser error:
Ascending
-
Descending
-
@@ -14113,17 +14075,17 @@ Parser error:
Select attributes
-
Columns
- Kolone
+
Reset
- Vraćanje
+
Case sensitive
-
?
-
Delete selected features (DEL)
-
Unselect all (Ctrl+U)
-
Ctrl+U
-
Move selection to top (Ctrl+T)
-
Invert selection (Ctrl+R)
-
Zoom map to the selected rows (Ctrl+J)
-
Pan map to the selected rows (Ctrl+P)
-
Toggle editing mode (Ctrl+E)
-
Ctrl+E
-
Save Edits (Ctrl+S)
-
Select features using an expression
-
New column (Ctrl+W)
-
Ctrl+W
-
Filters the visible features according to the current filter selection and filter string.
-
Apply
-
mMainViewButtonGroup
-
Table View
-
=
- =
+
Update All
-
Advanced Filter (Expression)
-
Use the Expression Builder to define the filter
-
Show All Features
-
Show Selected Features
-
Show Edited and New Features
-
Show Features Visible On Map
-
The filter defines which features are currently shown in the list or on the table
-
Form View
-
Column Filter
-
Filter all the features which have been edited but not yet saved
-
Delete column (Ctrl+L)
-
Open field calculator (Ctrl+I)
-
Attribute table - %1 (%n Feature(s))
feature count
-
- Atributna tablica - %1 (%n element)
- Atributna tablica - %1 (%n elementa)
- Atributna tablica - %1 (%n elemenata)
-
+ Atributna tablica - %1 (%n element) Atributna tablica - %1 (%n elementa) Atributna tablica - %1 (%n elemenata)
Parsing error
-
Evaluation error
-
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
-
Update Filtered
-
Error
- Pogreška
+
An error occured while evaluating the calculation string:
%1
-
Expression based filter
-
Attribute error
-
Error filtering
-
Geometryless feature added
-
@@ -14484,7 +14442,7 @@ Parser error:
Edit Widget Properties
-
Label on top
-
@@ -14502,22 +14460,22 @@ Parser error:
Normal
-
Lighten
-
Screen
-
Dodge
-
Darken
-
Multiply
-
Burn
-
Soft light
-
Hard light
-
Subtract
-
@@ -14594,7 +14552,7 @@ Parser error:
Database: %1
Driver: %2
Database: %3
-
Name
-
xMin
-
yMin
-
xMax
-
yMax
-
New bookmark
-
Unable to create the bookmark.
Driver:%1
Database:%2
-
Are you sure you want to delete %n bookmark(s)?
number of rows
-
-
+
Empty extent
-
Reprojected extent is empty.
-
@@ -14692,7 +14646,7 @@ Database:%2
Cannot get WMS select dialog from provider.
-
Cannot set layer CRS
-
@@ -14715,7 +14669,7 @@ Database:%2
Param
-
F5
- F5
+
Dialog
-
Path
- Putanja
+
@@ -14802,27 +14756,27 @@ Database:%2
Case Sensitive
-
Filter Pattern Syntax
-
Normal
-
Wildcard(s)
-
Regular Expression
-
Properties
- Osobine
+
Fast scan this dir.
-
Add Layer
-
Add Selected Layers
- Dodaj odabrane slojeve
+
Add a directory
-
Add directory to favourites
-
Error
- Pogreška
+
Layer Properties
- Osobine sloja
+
Directory Properties
-
@@ -14936,22 +14890,22 @@ Database:%2
Dialog
-
Display Name
-
Layer Source
-
Provider
-
Project home
-
Favourites
-
@@ -14987,7 +14941,7 @@ Database:%2
No Brush
-
Cross
-
BDiagonal
-
FDiagonal
-
Diagonal X
-
Dense 1
-
Dense 2
-
Dense 3
-
Dense 4
-
Dense 5
-
Dense 6
-
Dense 7
-
@@ -15068,38 +15022,38 @@ Database:%2
Form
- Obrazac
+
A calendar widget to enter a date.
-
Date format
-
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
Simbol
- Value
Vrijednost
- Label
Oznaka
@@ -15119,17 +15073,17 @@ Database:%2
Change...
-
Color ramp
-
Invert
-
Napredno
- Random colors
-
- Symbol levels...
Razine simbola...
- High number of classes!
-
- Classification would yield %1 entries which might not be expected. Continue?
-
- Error
Pogreška
- There are no available color ramps. You can add them in Style Manager.
Nema dostupnih rampi boja. Možete ih dodati pod Upravljanjem stilovima.
- The selected color ramp is not available.
Odabrana rampa boja nije dostupna.
- Confirm Delete
-
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Klasifikacijsko polje je izmijenjeno s '%1' na '%2'.
Trebaju li postojeće klase biti izbrisane prije klasifikacije?
@@ -15215,17 +15169,17 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Character Selector
-
Font:
-
Current font family and style
-
@@ -15233,17 +15187,17 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Form
- Obrazac
+
Representation for checked state
-
Representation for unchecked state
-
@@ -15251,35 +15205,30 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Shift-click to expand, then collapse others
-
Ctrl (or Alt)-click to toggle all
-
QgsColorButton
- Select Color
-
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -15287,7 +15236,7 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Select Color
-
@@ -15296,12 +15245,12 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Random colors
-
New color ramp...
-
@@ -15309,7 +15258,7 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Show compass
-
Internal Compass
-
Azimut
-
@@ -15352,7 +15301,7 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Composer
Kompozer
@@ -15364,83 +15313,83 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Cu&t
-
Cut
- Izreži
+
&Copy
-
Copy
- Kopiraj
+
&Paste
-
Paste
- Zalijepi
+
Edit
-
Normal
-
Simulate Photocopy (Grayscale)
-
Simulate photocopy (grayscale)
-
Simulate Fax (Mono)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
Atlas
-
Settings
- Postavke
+
Window
- Prozor
+
%1%
- %1%
+
Item properties
-
Command history
-
Atlas generation
-
Set as atlas feature for %1
-
x: %1 mm
-
y: %1 mm
-
page: %3
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
Choose a file name to save the map as
Odaberi naziv datoteke pod kojim će se spremiti mapa
@@ -15560,36 +15509,36 @@ Trebaju li postojeće klase biti izbrisane prije klasifikacije?
Empty filename pattern
-
The filename pattern is empty. A default one will be used.
-
Directory where to save PDF files
-
Unable to write into the directory
-
The given output directory is not writable. Cancelling.
-
Atlas processing error
-
Feature filter parser error: %1
-
Error creating %1.
-
Rendering maps...
-
Abort
Prekid
- Big image
Velika slika
- To create image %1x%2 requires about %3 MB of memory. Proceed?
-
- Choose a file name to save the map image as
Odaberite naziv datoteke za spremanje slike mape
- Memory Allocation Error
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
-
- Image export error
-
- Directory where to save image files
-
- Image format:
-
- SVG warning
SVG upozorenje
- Don't show this message again
Ne prikazuj više ovu poruku
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
-
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4 SVG kodu. Specifično, postoje problemi sa slojevima koji se ne obrezuju po okviru mape (bounding box).</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Ako vam je potrebna vektorska izlazna datoteka iz QGIS-a preporučuje se da probate s ispisom u PostScript ako vas SVG izlaz ne zadovoljava.</p>
- SVG Format
SVG oblik
- Directory where to save SVG files
-
- SVG export error
-
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
-
- Duplicating composer...
-
- Duplicate Composer
-
- Composer duplication failed.
-
- Save template
-
- Composer templates
-
- Save error
Pogreška spremanja
- Error, could not save file
Pogreška, nije moguće spremiti datoteku
- Load template
Učitaj predložak
- Read error
Pogreška čitanja
- Error, could not read file
Pogreška, nije moguće pročitati datoteku
- Composer error
-
- Error, could not create new composer
-
- Loading template into composer...
-
- Project contains WMS layers
Projekt sadrži WMS slojeve
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Neki WMS poslužitelji (npr. UMN mapserver) imaju limit za parametre ŠIRINA i VISINA. Ispisom slojeva s tih poslužitelja može se preći taj limit. Ako je tome slučaj, WMS slojevi neće biti ispisani
-
- Project contains composition effects
-
-
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
-
Project contains composition effects
+
+
+ Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
+
+
+ Print as raster
Ispis kao raster
- Landscape
- Pejzaž
+
@@ -15850,41 +15799,41 @@ Please try a lower resolution or a smaller papersize
Arrow outline width
-
Arrowhead width
-
Arrow color changed
-
Select arrow color
-
Arrow marker changed
-
Arrow start marker
-
Arrow end marker
-
Main properties
-
Arrow head width
-
Center
- Centar
+
Right
- Desno
+
Left
- Lijevo
+
Attribute
- Atribut
+
Heading
-
Alignment
- Poravnanje
+
@@ -16020,22 +15969,22 @@ Please try a lower resolution or a smaller papersize
Paper Navigation
-
Composer Item Actions
-
Composer Items
-
Atlas
-
Zoom full
-
Ctrl+0
-
Ctrl++
- Ctrl++
+
Ctrl+-
- Ctrl+-
+
Zoom to 100%
-
Ctrl+1
-
Zoom
- Približi
+
Add Legend
-
Add new legend
-
Export as image
- Izvezi kao sliku
+
Show Grid
-
Show grid
- Prikaži mrežu
+
Ctrl+'
-
Snap to Grid
-
Snap to grid
-
Ctrl+Shift+'
-
Show Guides
-
Show guides
-
Ctrl+;
-
Snap to Guides
-
Snap to guides
-
Ctrl+Shift+;
-
Smart Guides
-
Smart guides
-
Ctrl+Alt+;
-
Clear Guides
-
Clear guides
-
Add image
-
Ctrl+G
- Ctrl+G
+
Ctrl+Shift+G
-
Ctrl+]
-
Ctrl+[
-
Ctrl+Shift+]
-
Ctrl+Shift+[
-
Load from Template
-
Load from template
-
Save as Template
-
Align Left
-
Align Center
-
Align Right
-
Align Top
-
Align Center Vertical
-
Align Bottom
-
Add Arrow
-
Add Table
-
Add attribute table
-
Page setup
-
&Undo
- &Vrati
+
&Redo
- &Ponovi
+
Ctrl+Shift+L
- Ctrl+Shift+L
+
Pa&ste in Place
-
Paste in place
-
Ctrl+Shift+V
- Ctrl+Shift+V
+
&Delete
- &Briši
+
Delete selected items
-
Del
-
De&select All
-
Deselect all
-
Ctrl+Shift+A
- Ctrl+Shift+A
+
Select &All
-
Select all items
-
Ctrl+A
- Ctrl+A
+
&Invert Selection
-
Invert selection
-
Select Next Item &Below
-
Select next item below
-
Ctrl+Alt+[
-
Select Next Item &Above
-
Select next item above
-
Ctrl+Alt+]
-
Pan Composer
-
Composer Options...
-
Show Rulers
-
Show rulers
-
Ctrl+R
-
First Feature
-
Previous Feature
-
Next Feature
-
Last Feature
-
Preview Atlas
-
Print Atlas...
-
Export Atlas as Images...
-
Export Atlas as SVG...
-
Export Atlas as PDF...
-
Export Atlas as PDF
-
Atlas Settings
-
Add Rectangle
-
Add rectangle
-
Add Triangle
-
Add triangle
-
Add Ellipse
-
Add ellipse
-
Add HTML
-
Add html frame
-
Composer Manager
-
&New Composer
-
New composer
-
Save project
-
&Duplicate Composer
-
Duplicate composer
-
New from Template
-
New from template
-
Lock Selected Items
-
Ctrl+L
- Ctrl+L
+
Unlock All
-
Unlock All Items
-
@@ -16855,17 +16804,17 @@ Please try a lower resolution or a smaller papersize
Left
- Lijevo
+
Center
- Centar
+
Right
- Desno
+
@@ -16873,12 +16822,12 @@ Please try a lower resolution or a smaller papersize
Ascending
-
Descending
-
@@ -16886,42 +16835,42 @@ Please try a lower resolution or a smaller papersize
Use existing frames
-
Extend to next page
-
Repeat on every page
-
Repeat until finished
-
Change html url
-
Select HTML document
-
Change resize mode
-
Use smart breaks changed
-
@@ -16929,17 +16878,17 @@ Please try a lower resolution or a smaller papersize
HTML Frame
-
HTML frame
-
Main properties
-
Resize mode
-
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
- mm
+
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
-
- Background color changed
-
- Item position changed
-
- Item outline width
-
- Item frame join style
-
- Item frame toggled
-
- Item background toggled
-
- Select background color
Boja pozadine
- Select frame color
Odabir boje okvira
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
-
- Item rotation changed
-
@@ -17055,118 +17004,107 @@ Please try a lower resolution or a smaller papersize
Global Options
-
- Position and size
-
- Reference point
-
- X
X
- Y
Y
- Width
Širina
- Height
Visina
- Page
-
- ...
- ...
-
-
- Rotation
- Rotacija
+
- °
- °
+
- Frame
-
- mm
- mm
+
- Join style
- Spoji stil
+
- Rendering
Prikazivanje
- Blending mode
-
- Thickness
-
- Color...
Boja...
- Background
Pozadina
- Transparency
Transparentnost
- Item ID
-
- Id
Id
@@ -17176,43 +17114,43 @@ Please try a lower resolution or a smaller papersize
Label text HTML state changed
-
Label text changed
-
Label font changed
-
Label margin changed
-
Label color changed
-
- Insert expression
-
- Label alignment changed
-
@@ -17230,17 +17168,17 @@ Please try a lower resolution or a smaller papersize
Main properties
-
Render as HTML
-
Insert an expression
-
QgsComposerLegend
+ Legend
- Kazalo
+ Kazalo
@@ -17351,143 +17290,143 @@ Please try a lower resolution or a smaller papersize
Title style
-
Item wrapping changed
-
Legend title changed
-
Legend title alignment changed
-
Legend column count
-
Legend split layers
-
Legend equal column width
-
Legend symbol width
-
Legend symbol height
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
Legend group space
-
Legend layer space
-
Legend symbol space
-
Legend icon label space
-
Title font changed
-
Legend group font changed
-
Legend layer font changed
-
Legend item font changed
-
Legend font color changed
-
Legend box space
-
Legend map changed
-
Legend item edited
-
Legend updated
-
Legend group added
-
- Map %1
Mapa %1
- None
Nijedan
@@ -17497,7 +17436,7 @@ Please try a lower resolution or a smaller papersize
Legend Options
-
Main properties
-
Wrap text on
-
Show feature count for each class of vector layer.
-
Fonts
- Fontovi
+
Space above text using subgroup style.
-
Subgroup space
-
Space above symbol and symbol label.
-
Column space
-
Count
-
Equal column widths
-
Allow to split layer items into multiple columns.
-
Split layers
-
Spacing
-
Title alignment:
-
Left
- Lijevo
+
Center
- Centar
+
Right
- Desno
+
Update legend. User defined labels are preserved.
-
Update item
-
Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
-
Update all
-
Auto update
-
Title font...
-
Subgroup font...
-
Group font...
-
Item font...
-
WMS LegendGraphic
-
Legend width
-
Legend height
-
Space above text using group style.
-
Group Space
-
Symbol space
-
Space between symbol icon and symbol label (symbol label left margin).
-
Icon label space
-
Box space
-
Space below title.
-
Title space
-
@@ -17761,12 +17700,12 @@ Please try a lower resolution or a smaller papersize
&Show
-
&Duplicate
-
Specific
-
Template error
-
Error, template file not found
-
Composer error
-
Error, could not create composer
-
Loading template into composer...
-
Error, could not load template file
-
Choose template
-
Composer templates
-
File system error
-
Error, could not open or create local directory
-
copy
-
Duplicating composer...
-
Duplicate Composer
-
Composer duplication failed.
-
@@ -17886,7 +17825,7 @@ Please try a lower resolution or a smaller papersize
New from template
-
Open template directory
-
user
-
QgsComposerMap
- Map %1
Mapa %1
- Map will be printed here
Mapa će biti ispisana ovdje
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Privremena memorija
- Render
Prikaži
- Rectangle
Pravokutnik
- Solid
Čvrsto
- Cross
Križ
- Markers
- Decimal
+
- Decimal
- DegreeMinute
+
+
+ DegreeMinuteSecond
+
+
+ No frame
+
+
+ Zebra
+
+
+ Map scale changed
+
+
+ Map rotation changed
+
+
+ Map extent changed
+
DegreeMinute
-
-
- DegreeMinuteSecond
-
-
- Zebra
-
-
- Map scale changed
-
-
- Map rotation changed
-
-
- Map extent changed
-
-
- Select font color
Odaberi boju fonta
Select grid frame color
-
Select grid frame fill color
-
- Canvas items toggled
-
- None
Nijedan
- Overview frame style changed
-
- Overview centering mode changed
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Jedinice mape
-
-
- Millimeter
- Milimetar
-
-
- Centimeter
-
-
- change...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
-
- Grid interval changed
-
- Grid offset changed
-
- Grid line style changed
-
- Grid type changed
-
- Grid cross width changed
+
+
+ Annotation font changed
-
- Label font changed
+
+
+ Annotation distance changed
-
- Annotation format changed
-
- Annotation toggled
-
- Changed annotation precision
-
- Changed grid frame style
-
- Changed grid frame width
+
+
+ Changed grid frame line thickness
-
- Grid frame color changed
-
- Grid frame first fill color changed
-
- Grid frame second fill color changed
-
- Inside frame
Unutrašnji okvir
- Outside frame
Vanjski okvir
- Disabled
-
- Horizontal
Horizontalno
- Vertical
Vertikalno
- Annotation position changed
-
- Changed annotation direction
-
- Map %1
Mapa %1
@@ -18255,382 +18132,292 @@ Please try a lower resolution or a smaller papersize
Map Options
-
- Map
Mapa
- Main properties
-
- Update preview
Osvježi pretpregled
- Scale
Mjerilo
- Map rotation
-
- Draw map canvas items
-
- Lock layers for map item
Zaključaj slojeve za stavku mape
- Extents
Opseg (extents)
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
Postavi na opseg prikaza mape
- X min
X min
- View extent in map canvas
-
- Controlled by atlas
-
- Margin around feature
-
- %
- %
+
- Fixed scale
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
- Predefined scale (best fit)
-
+ Show grid
- Prikaži mrežu
+ Prikaži mrežu
+ Grid &type
- &Tip mreže
+ &Tip mreže
- Offset
Pomak
- mm
- mm
+
- Blend mode
-
- Interval
- Interval
+
- Grid frame
-
- Frame size
-
- Frame line thickness
-
- Color...
- Boja...
+
- Frame fill colors
-
- Marker style
- Stil markera
-
-
- Overview blending mode
-
- Invert overview
-
- Center on overview
-
- X
-
- °
- °
+
- Y
-
- Cross width
Širina križića
- Frame style
-
- Line style
-
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
-
-
- CRS
- CRS
-
-
- change...
-
- Interval units
-
-
- Map unit
- Jedinice mape
-
-
- Millimeter
- Milimetar
-
-
- Centimeter
-
-
- No frame
-
-
- Zebra
-
-
- Draw coordinates
-
- Format
Oblik
- Left
Lijevo
- Right
Desno
- Top
Vrh
- Bottom
Dno
- Font
Font
- Font...
Font...
- Font color
- Boja fonta
-
-
- Distance to map frame
Udaljenost do okvira mape
- Coordinate precision
Preciznost koordinate
- Font color...
Boja fonta...
- Overview
Pregled
- Overview frame
-
- Overview style
-
- Change...
-
@@ -18638,51 +18425,51 @@ Please try a lower resolution or a smaller papersize
Change item position
-
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
- Kompozer
+
- Picture expression eval error: %1
-
@@ -18695,64 +18482,64 @@ Please try a lower resolution or a smaller papersize
Picture changed
-
- Expression based image path
-
- Picture rotation changed
-
- Select new preview directory
Odaberite novi direktorij pretpregleda
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
-
- Rotation map changed
-
- Map %1
Mapa %1
- Creating icon for file %1
Stvaranje ikonice za datoteku %1
@@ -18767,17 +18554,17 @@ Please try a lower resolution or a smaller papersize
Picture
-
Main properties
-
Image source
-
Expression
- Izraz
+
Resize mode
-
Placement
- Postavljanje
+
Zoom
- Približi
+
Stretch
-
Clip
- Obreži
+
Zoom and resize frame
-
Resize frame to image size
-
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
- Sredina
+
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Loading previews...
-
Image search paths
-
Image rotation
-
Sync with map
-
QgsComposerScaleBar
- units
-
- km
-
- m
-
- miles
-
- ft
-
- Nm
-
QgsComposerScaleBarWidget
Single Box
Jedna kućica
Double Box
Dvostruka kućica
Line Ticks Middle
Linija dodiruje sredinu
Line Ticks Down
Lnija dodiruje odozdo
Line Ticks Up
Linija dodiruje odozgo
Numeric
Brojčano
@@ -19021,149 +18808,124 @@ Please try a lower resolution or a smaller papersize
Nautical Miles
-
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Odaberi boju fonta
-
-
- Select stroke color
-
-
- Map %1
Mapa %1
- Scalebar map changed
-
- Scalebar line width
-
- Scalebar segment size
-
- Scalebar segments left
-
- Number of scalebar segments changed
-
- Scalebar height changed
-
- Scalebar font changed
-
- Scalebar font color changed
-
- Scalebar color changed
-
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
-
- Scalebar unit text
-
- Scalebar map units per segment
-
- Scalebar style changed
-
- Scalebar label bar space
-
- Scalebar box content space
-
- Scalebar alignment
-
- Scalebar changed to map units
-
- Scalebar changed to feet
-
- Scalebar changed to nautical miles
-
- Scalebar changed to meters
-
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -19176,12 +18938,12 @@ Please try a lower resolution or a smaller papersize
Scalebar
-
Main properties
-
Box margin
-
Labels margin
-
Join style
- Spoji stil
+
Cap style
- Cap stil
+
Fonts and colors
-
Fill color...
-
Secondary fill color...
-
-
- Stroke color...
-
@@ -19318,39 +19075,39 @@ Please try a lower resolution or a smaller papersize
Ellipse
Elipsa
Rectangle
Pravokutnik
Triangle
Trokut
- Shape style changed
-
- Shape radius changed
-
- Shape type changed
-
@@ -19368,27 +19125,27 @@ Please try a lower resolution or a smaller papersize
Main properties
-
Corner radius
-
mm
- mm
+
Style
- Stil
+
Change...
-
@@ -19396,22 +19153,22 @@ Please try a lower resolution or a smaller papersize
Descending
-
Ascending
-
Attribute
- Atribut
+
Sort Order
-
@@ -19425,44 +19182,44 @@ Please try a lower resolution or a smaller papersize
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
-
Table header alignment changed
-
Table layer changed
-
Table attribute settings
-
Table map changed
-
Table maximum columns
-
Table header font
-
Table content font
-
Table grid stroke
-
Table grid color
-
Table grid toggled
-
Table visible only toggled
-
@@ -19518,12 +19275,12 @@ Please try a lower resolution or a smaller papersize
Attribute table
-
Main properties
-
Refresh table data
-
Filter with
-
...
- ...
+
mm
- mm
+
Stroke width
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
- Lijevo
+
Center
- Centar
+
Right
- Desno
+
@@ -19690,32 +19447,32 @@ Please try a lower resolution or a smaller papersize
Label added
-
Scale bar added
-
Legend added
-
Picture added
-
Table added
-
Shape added
-
Arrow added
-
Map added
-
Html item added
-
Html frame added
-
Item moved
-
Zoom item content
-
QgsComposition
- Label added
-
- Map added
-
- Arrow added
-
- Scale bar added
-
- Shape added
-
- Picture added
-
- Legend added
-
- Table added
-
+
+ Aligned items left
+
+
+ Aligned items horizontal center
+
+
+ Aligned items vertical center
+
Aligned items left
-
-
- Aligned items horizontal center
-
-
- Aligned items vertical center
-
-
- Aligned items right
-
- Aligned items top
-
- Aligned items bottom
-
- Items locked
-
- Items unlocked
-
- Item z-order changed
-
- Remove item group
-
- Frame deleted
-
- Item deleted
-
- Multiframe removed
-
@@ -19916,148 +19673,148 @@ Please try a lower resolution or a smaller papersize
Landscape
Pejzaž
Portrait
Portret
Map %1
Mapa %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
Prilagođeno
@@ -20075,119 +19832,109 @@ Please try a lower resolution or a smaller papersize
Papir i kvaliteta
- Presets
-
- ...
- ...
-
-
- Width
Širina
- Height
Visina
- Units
Jedinice
- Number of pages
-
- Orientation
Orijentacija
- Export resolution
-
- Print as raster
Ispis kao raster
-
- Snap tolerance
-
-
- px
-
Change...
-
- Page background
-
- Grid
+
+
+ dpi
dpi
- World file on
-
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
-
- x:
x:
- y:
y:
+ Spacing
+
+
+ Snap to alignments
+
+
+ Tolerance
- Tolerancija
+ Tolerancija
@@ -20330,17 +20077,17 @@ Please try a lower resolution or a smaller papersize
Error starting help viewer [%1]
-
Context help
-
<h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
-
@@ -20348,7 +20095,7 @@ Please try a lower resolution or a smaller papersize
The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
colors
-
discrete
-
continuous
-
continuous (multi)
-
variants
-
@@ -20427,24 +20174,24 @@ Pogreška: %5
Selections by theme
-
All by author
-
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
All Ramps (%1)
-
%1 directory details
-
%1 gradient details
-
@@ -20477,18 +20224,18 @@ and current file is [%3]
cpt-city color ramp
-
Selection and preview
-
License
-
Information
-
Author(s)
-
Details
-
Save as standard gradient
-
@@ -20560,7 +20307,7 @@ and current file is [%3]
Control rendering order
-
@@ -20581,12 +20328,12 @@ and current file is [%3]
new CRS
-
The proj4 definition of '%1' is not valid.
-
Choose a customization INI file
-
Customization files (*.ini)
-
@@ -20734,12 +20481,12 @@ and current file is [%3]
Customization
-
Enable customization
-
Catch
-
Switch to catching widgets in main application
-
Expand All
-
Collapse All
- Sažmi sve
+
Description...
-
Paste
- Zalijepi
+
string
-
int
-
double
-
Field type:
-
integer
-
unknown type
-
Data defined override
-
expression
-
Deactivate
-
Activate
-
No matching field types found
-
Current:
-
Data definition description
-
undefined
-
Parse error: %1
-
'%1' field missing
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
<b>Usage:</b><br>%1<br>
-
<b>Expected input:</b><br>%1<br>
-
<b>Valid input types:</b><br>%1<br>
-
<b>Current definition %1:</b><br>%2
-
double
-
'<red>,<green>,<blue>,<alpha>'
-
'<filename>'
-
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -21106,68 +20853,68 @@ and current file is [%3]
Form
- Obrazac
+
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
- zadano
+
custom
-
preview
-
@@ -21175,13 +20922,13 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
unknown
- nepoznato
+
@@ -21189,42 +20936,42 @@ and current file is [%3]
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Destination CRS
-
Source CRS
-
Layer
- Sloj
+
@@ -21232,7 +20979,7 @@ and current file is [%3]
Add PostGIS layers
-
Hold dialog open
-
Copyright Label Decoration
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
Color
-
@@ -21419,17 +21166,17 @@ p, li { white-space: pre-wrap; }
Please select a raster layer
- Molim odaberite rasterski sloj
+
Invalid raster layer
-
Layer CRS must be equal to project CRS
-
@@ -21437,12 +21184,12 @@ p, li { white-space: pre-wrap; }
Grid properties
-
Enable grid
-
Grid type
-
Line symbol
-
Marker symbol
-
Update Interval / Offset from
-
Canvas Extents
-
Active Raster Layer
-
North Arrow Decoration
-
Bar
- Stupac
+
Box
- Kućica
+
mile
- milja
+
Scale Bar Decoration
-
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -21961,32 +21708,32 @@ p, li { white-space: pre-wrap; }
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Invalid regular expression
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Text files
-
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
Regular expression is not valid
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
Create a Layer from a Delimited Text File
-
File Name
- Naziv datoteke
+
Full path to the delimited text file
-
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
-
Layer name
- Naziv sloja
+
Name to display in the map legend
-
Name displayed in the map legend
-
Browse to find the delimited text file to be processed
-
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
-
Browse...
-
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
Tab
-
Space
- Razmak
+
Comma
-
Encoding
-
Select the file encoding
-
X and Y coordinates are expressed in degrees/minutes/seconds
-
DMS coordinates
-
Geometry field
-
Name of the field containing well known text value
-
Geometry type
- Tip geometrije
+
Detect
-
Point
- Točka
+
Line
- Linija
+
Polygon
- Poligon
+
Record options
-
Field options
-
File format
-
Number of header lines to discard
-
The number of lines to discard from the beginning of the file
-
Field names are read from the first record. If not selected then fields are numbered
-
First record has field names
-
CSV (comma separated values)
-
Fields are defined by the specified delimiter, quote, and escape characters
-
Custom delimiters
-
Regular expression delimiter
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use spatial index
-
Use an index to improve performance of subset filters (set in layer properties)
-
Use subset index
-
Watch for changes to the file by other applications while QGIS is running
-
Watch file
-
Geometry definition
-
Geometry is a point defined by X and Y coordinate fields
-
Point coordinates
-
Geometry is read as a well known text string from the selected fields
-
Well known text (WKT)
-
The file contains only attribute information - it will not be displayed on the map
-
No geometry (attribute only table)
-
Trim leading and trailing spaces from fields
-
Trim fields
-
Discard empty fields in each record
-
Discard empty fields
-
Number fields use comma for a decimal separator
-
Decimal separator is comma
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Semicolon
-
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
- Izraz
+
Regular expression used to split each line into fields
-
Layer settings
-
Sample data
-
Colon
-
<p align="right">X field</p>
-
Name of the field containing x values
-
<p align="right">Y field</p>
-
Name of the field containing y values
-
@@ -22539,7 +22286,7 @@ p, li { white-space: pre-wrap; }
Category label
-
@@ -22558,12 +22305,12 @@ p, li { white-space: pre-wrap; }
Around Point
-
Over Point
-
Free
-
On line
-
Above line
-
Below Line
-
Map orientation
-
Text diagram
-
x-height
-
Diameter
-
Unknown diagram type.
-
The diagram type '%1' is unknown. A default type is selected for you.
-
Bar length: Scale linearly, such as the following value matches the specified size.
-
Diagrams: No attributes added.
-
Interpolation value
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Pen color
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -22739,7 +22486,7 @@ p, li { white-space: pre-wrap; }
Priority:
-
Appearance
-
Bar width
-
Transparency 0%
-
Start Angle
-
Only show diagrams with a size inside the specified range.
-
Hide diagrams with a size outside the specified range.
-
Edit expression
-
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
Increase size of small diagrams
-
Minimum size
-
Line Options
-
Automated placement settings
-
Label placement
-
Bar Orientation
-
Available attributes
-
Add expression
-
Assigned attributes
-
Drag and drop to reorder
-
Color
-
@@ -23076,35 +22823,35 @@ Leave empty to automatically apply the maximum value.
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
Run layer action
-
Open form
-
Loading features...
-
Attribute table
-
%1 features loaded.
-
@@ -23145,12 +22892,12 @@ Parser error:
Form
- Obrazac
+
Dummy Text
-
@@ -23158,12 +22905,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -23171,57 +22918,57 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
- Spremi kao
+
...
- ...
+
No symbology
-
Feature symbology
-
Symbol layer symbology
-
Select all
- Odaberi sve
+
Unselect all
- Deselektiraj sve
+
Export features intersecting the current map extent
-
@@ -23230,12 +22977,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -23283,12 +23030,12 @@ Parser error:
Horizontal anchor point
-
Vertical anchor point
-
@@ -23319,17 +23066,17 @@ Parser error:
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
(i.e. including colliding objects)
-
Draw text as outlines (recommended)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
Show all labels and features for all layers
-
Automated Placement Engine
-
Show candidates (for debugging)
-
@@ -23405,35 +23152,35 @@ Parser error:
Dialog
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
Always show details
-
Details >>
-
@@ -23441,7 +23188,7 @@ p, li { white-space: pre-wrap; }
Expression string builder
-
@@ -23449,22 +23196,22 @@ p, li { white-space: pre-wrap; }
(String Concatenation)
-
Joins two values together into a string
-
Usage
-
'Dia' || Diameter
-
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Parser Error
-
Eval Error
-
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
-
Load top 10 unique values
-
Load all unique values
-
@@ -23577,32 +23324,32 @@ p, li { white-space: pre-wrap; }
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Equal operator
-
Addition operator
-
Subtraction operator
-
Division operator
-
Multiplication operator
-
Power operator
-
String Concatenation
-
Open Bracket
-
Close Bracket
-
Output preview is generated <br> using the first feature from the layer.
-
Output preview:
-
Select By Expression
-
Add to selection
-
Remove from selection
-
Select within selection
-
@@ -23759,22 +23506,22 @@ p, li { white-space: pre-wrap; }
layer
-
map view
-
user defined
-
Extent (current: %1)
-
@@ -23782,37 +23529,37 @@ p, li { white-space: pre-wrap; }
Form
- Obrazac
+
West
- Zapad
+
East
- Istok
+
North
- Sjever
+
South
- Jug
+
Layer extent
-
Map view extent
-
@@ -23828,7 +23575,7 @@ p, li { white-space: pre-wrap; }
Dialog
-
@@ -23837,18 +23584,18 @@ p, li { white-space: pre-wrap; }
Not available for layer
-
Only update %1 selected features
-
Evaluation error
-
An error occured while evaluating the calculation string:
%1
-
Please enter a field name
-
The expression is invalid see (more info) for details
-
@@ -23898,7 +23645,7 @@ p, li { white-space: pre-wrap; }
Create a new field
-
Width of complete output. For example 123,456 means 6 as field width.
-
Expression dialog
-
@@ -23956,7 +23703,7 @@ p, li { white-space: pre-wrap; }
Name
-
Type name
-
Layer
- Sloj
+
Field
- Polje
+
Deleted attribute
- Izbrisan atribut
+
Dial range
-
Value relation
-
UUID generator
-
Photo
-
Web view
-
Editor Widget
-
Toggle editing mode
-
Delete column
- Izbriši kolonu
+
Fields
- Polja
+
Relations
-
Suppress attribute form pop-up after feature creation
-
On
-
Off
-
Autogenerate
-
Drag and drop designer
-
Provide ui-file
-
Attribute editor layout:
-
Python Init function
-
@@ -24292,12 +24039,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
...
- ...
+
Select a file
-
@@ -24306,13 +24053,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
@@ -24374,7 +24121,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
internal GPS
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24536,7 +24283,7 @@ p, li { white-space: pre-wrap; }
Connecting to GPS device...
-
Failed to connect to GPS device.
-
Dis&connect
-
Connected to GPS device.
-
Error opening log file.
-
&Connect
-
Disconnected from GPS device.
-
%1 m
-
%1 km/h
-
No fix
-
Differential
-
Non-differential
-
No position
-
Valid
-
Invalid
-
Save GPS log file as
-
NMEA files
-
&Add Point
-
&Add Line
-
&Add Polygon
-
@@ -24752,17 +24499,17 @@ red = no fix or bad fix
gray = no data
2D/3D depends on this information being available
-
Add track point
-
Reset track
-
Signal
-
Satellite
-
Debug
-
&Connect
-
latitude of position fix (degrees)
-
Longitude
-
longitude of position fix (degrees)
-
antenna altitude with respect to geoid (mean sea level)
-
Altitude
-
Latitude
-
Time of fix
-
date/time of position fix (UTC)
-
speed over ground
-
Speed
- Brzina
+
track direction (degrees)
-
Direction
- Smjer
+
Horizontal Dilution of Precision
-
HDOP
-
Vertical Dilution of Precision
-
VDOP
-
Position Dilution of Precision
-
PDOP
-
GPS receiver configuration 2D/3D mode: Automatic or Manual
-
position fix dimensions: 2D, 3D or No fix
-
Dimensions
- Dimenzije
+
quality of the position fix: Differential, Non-differential or No position
-
Quality
-
position fix status: Valid or Invalid
-
number of satellites used in the position fix
-
Satellites
-
H accurancy
-
V accurancy
-
Connection
-
Serial device
-
Refresh serial device list
-
Device
-
Internal
-
Automatically add points
-
Track width in pixels
-
save layer after every feature added
-
Automatically save added feature
-
save GPS data (NMEA sentences) to a file
-
Log File
-
browse for log file
-
Map centering
-
when leaving
-
% of map extent
-
Cursor
-
&GPS Tools
-
&GPS
-
Unable to create a GPX file with the given name. Try again with another name or in another directory.
-
GPS eXchange format
-
Waypoints from a route
-
Waypoints from a track
-
Route from waypoints
-
Track from waypoints
-
Dimensions
- Dimenzije
+
Origin
-
Pixel Size
-
Band
- Kanal
+
Format not supported
-
Cannot read data
-
Cannot get GDAL raster band: %1
-
@@ -25596,17 +25343,17 @@ Molim odaberite valjanu datoteku.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -25818,9 +25565,9 @@ Molim odaberite valjanu datoteku.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
@@ -25963,7 +25710,7 @@ p, li { white-space: pre-wrap; }
Coordinate of image(column/line)
-
Mean error [%1]
-
Projective
-
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
Local histogram stretch
-
Full histogram stretch
-
@@ -26434,7 +26181,7 @@ p, li { white-space: pre-wrap; }
Model files
-
@@ -26442,7 +26189,7 @@ p, li { white-space: pre-wrap; }
Globe Settings
-
Map
- Mapa
+
Base Layer
-
URL
- URL
+
TextLabel
- TekstOznaka
+
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -26653,7 +26400,7 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Error: %1 on line %2, column %3
-
WFS
-
GML Getfeature network request failed with error: %1
-
Network
-
@@ -26686,7 +26433,7 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
@@ -26694,88 +26441,88 @@ p, li { white-space: pre-wrap; }
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Color (start)
-
Color (end)
-
Angle
- Kut
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
QgsGraduatedSymbolRendererV2Model
- Symbol
Simbol
- Value
Vrijednost
- Label
Oznaka
@@ -26795,7 +26542,7 @@ p, li { white-space: pre-wrap; }
Change...
-
Color ramp
-
Quantile (Equal Count)
-
Natural Breaks (Jenks)
-
Pretty Breaks
-
Invert
-
Delete
-
Napredno
- Symbol levels...
Razine simbola...
- Error
Pogreška
- There are no available color ramps. You can add them in Style Manager.
Nema dostupnih rampi boja. Možete ih dodati pod Upravljanjem stilovima.
- The selected color ramp is not available.
Odabrana rampa boja nije dostupna.
- Warning
- Upozorenje
+
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
-
- Renderer creation has failed.
-
@@ -27069,12 +26816,12 @@ Press cancel to abort breaks calculation or OK to continue.
Information
-
Remove the selected layer(s) from canvas before continue.
-
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Sigurno želite izbrisati %n odabranih sloj(eva)?
- Sigurno želite izbrisati %n odabranih sloj(eva)?
- Sigurno želite izbrisati %n odabranih sloj(eva)?
-
+ Sigurno želite izbrisati %n odabranih sloj(eva)? Sigurno želite izbrisati %n odabranih sloj(eva)? Sigurno želite izbrisati %n odabranih sloj(eva)?
Left: %1
-
-- Middle: %1
-
-- Right: %1
-
@@ -27542,7 +27285,7 @@ Press cancel to abort breaks calculation or OK to continue.
Undo last vertex
-
Cannot parse version_min %1
-
Cannot parse version_max %1
-
Region
-
Input layers
-
Current map canvas
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
- Ne mogu naći pružatelja
+
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28845,7 +28588,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28884,7 +28627,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28946,7 +28689,7 @@ p, li { white-space: pre-wrap; }
<p align="center">Existing mapsets</p>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29032,22 +28775,22 @@ p, li { white-space: pre-wrap; }
Open Mapset
-
New Mapset
- Novi mapset
+
Close Mapset
-
Add GRASS Vector Layer
-
Open GRASS Tools
-
Create New Grass Vector
-
cellhd file %1 does not exist
-
Format not supported
-
Cannot read data
-
@@ -29471,7 +29214,7 @@ ili izmijenite slijedeće vrijednosti
Cannot rename the lock file %1
-
@@ -29490,7 +29233,7 @@ ili izmijenite slijedeće vrijednosti
GRASS Direct Tools
-
Direct Modules Tree
-
Direct Modules List
-
Direct Modules Tree
-
Direct Modules List
-
@@ -29605,60 +29348,60 @@ na liniji %2 kolona %3
Add feature
- Dodaj element
+
Start editing failed
- Neuspješno započeto uređivanje
+
Provider cannot be opened for editing
- Pružatelj se ne može otvoriti za uređivanje
+
Stop editing
- Zaustavi uređivanje
+
Do you want to save the changes to layer %1?
- Želite li spremiti izmjene sloja %1?
+
Error
- Pogreška
+
Problems during roll back
- Problemi tokom vraćanja (roll back)
+
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
-
Show more
-
@@ -29681,12 +29424,12 @@ na liniji %2 kolona %3
Provider
-
Datasource
- Izvor podataka
+
Select file to replace '%1'
-
Please select exactly one file.
-
Select new directory of selected files
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -29736,7 +29475,7 @@ na liniji %2 kolona %3
Handle bad layers
-
@@ -29744,12 +29483,12 @@ na liniji %2 kolona %3
Handle bad layers
-
%1 of %2 bad layers were not fixable.
-
@@ -29778,17 +29517,17 @@ na liniji %2 kolona %3
HTML annotation
-
Delete
-
html
-
@@ -29858,14 +29597,10 @@ na liniji %2 kolona %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Mreža nije odgovorila nakon %n sekunde neaktivnosti.
-Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
- Mreža nije odgovorila nakon %n sekunde neaktivnosti.
-Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
- Mreža nije odgovorila nakon %n sekundi neaktivnosti.
-Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
-
+ Mreža nije odgovorila nakon %n sekunde neaktivnosti.
+Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru. Mreža nije odgovorila nakon %n sekunde neaktivnosti.
+Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru. Mreža nije odgovorila nakon %n sekundi neaktivnosti.
+Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
@@ -29891,27 +29626,27 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
Layer
- Sloj
+
FID
-
Attribute
- Atribut
+
Value
- Vrijednost
+
Expand tree.
-
Clear Results
-
Help
- Pomoć
+
Select identify mode
-
Mode
- Mod
+
Select view mode for raster layers
-
View
- Pogled
+
Auto open form
-
Collapse tree.
-
New results will be expanded by default.
-
Copy selected feature to clipboard.
-
Print selected HTML response.
-
@@ -30000,22 +29735,22 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
Table
- Tablica
+
Tree
- Stablo
+
Graph
-
feature id
- element id
+
No attributes.
-
Copy feature
-
Toggle feature selection
-
Copy GetFeatureInfo request URL
-
Activate layer
-
Layer properties...
-
Attributes changed
-
Cannot print
-
Cannot print this item
-
@@ -30381,7 +30116,7 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -30389,17 +30124,17 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
Form
- Obrazac
+
Sub renderer:
-
Merge polygons before rendering (slow)
-
@@ -30751,7 +30486,7 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
Available typeface styles
-
Underlined text
-
Strikeout text
-
Bold text
(data defined only, overrides Style)
-
Italic text
(data defined only, overrides Style)
-
Scale-based
-
Show label
-
Ignores priority and permits collisions/overlaps
-
Always show (exceptions above)
-
points
-
map units
- jedinice mape
+
mm
- mm
+
% of length
-
%1 not found. Default substituted.
-
Chosen font
-
string
- string
+
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
- int [0-100] {0-20]?}
+
int [0-2000]
- int [0-100] {0-2000]?}
+
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
- int [0-100] {1-1000]?}
+
int [1-10000]
- int [0-100] {1-10000]?}
+
Text/Buffer sample
-
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
No change
-
All uppercase
-
All lowercase
-
Capitalize first letter
-
Size%1
-
X
-
File not found
- Datoteka nije pronađena
+
@@ -31057,7 +30792,7 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
Postavke označavanja sloja
- Label this layer with
Označi ovaj sloj s
@@ -31137,22 +30872,22 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
...
...
@@ -31170,22 +30905,22 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
Reset sample text
-
Size for sample text in map units
-
Sample background color
-
Line direction symbol
-
Multiple lines
-
- Automated placement settings (apply to all layers)
-
Text/Buffer Sample
-
Formatting
-
Shadow
-
Rendering
Prikazivanje
letter
-
Spacing
-
Blend mode
-
word
-
Underlined text
-
Bold text
(data defined only, overrides Style)
-
Italic text
(data defined only, overrides Style)
-
Font is missing.
-
Text formatting
-
Wrap on character
-
Line height
-
Line height spacing for multi-line text
-
line
-
Alignment
- Poravnanje
+
Paragraph style alignment of multi-line text
-
Force point inside polygon
-
Repeat
-
- Discourage labels from covering features
-
Available typeface styles
-
U
- U
+
Strikeout text
-
%
-
Capitalization style of text
-
Space in pixels or map units, relative to size unit choice
-
Type case
-
Zaštita (Buff)
- Labels will not show if larger than this on screen
-
- px
-
- Data defined
-
- X
X
- Y
Y
- Coordinate
-
- Preserve data rotation values
-
- horizontal
horizontalno
- vertical
-
- Label options
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
- Maximum
Maksimum
- Pixel size-based visibility (labels in map units)
-
- Labels will not show if smaller than this on screen
-
- Minimum
Minimum
@@ -31541,7 +31276,7 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
<
- Scale-based visibility
Vidljivost zasnovana na mjerilu
@@ -31561,92 +31296,92 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
left/right
-
above
-
below
-
Reverse direction
-
- Priority
Prioritet
- Low
Nisko
- High
Visoko
Around point
-
Offset from point
-
Parallel
-
Curved
-
Text buffer
-
Draw text buffer
-
Color buffer's fill
-
Draw background
-
Size X
-
Size type
-
Size Y
-
Draw drop shadow
-
Blur radius
-
Blur only alpha pixels
-
Label's rotation is ignored
-
Use global shadow
-
˚
-
Lowest label component
-
Draw under
-
Offset from centroid
-
Around centroid
-
Horizontal (slow)
-
Free (slow)
-
Using perimeter
-
visible polygon
-
whole polygon
-
Rotation
Rotacija
Above line
-
On line
-
Below line
-
Line orientation dependent position
-
Centroid
-
abc
-
Quadrant
-
Dužina
- outside
-
- inside
-
- Maximum angle between curved characters
-
Pen join style
-
Drop shadow
-
Load symbol parameters
-
Fixed
-
Circle
-
SVG
- SVG
+
Sync with label
-
Offset of label
-
Radius X,Y
-
symbol units
-
- Merge connected lines to avoid duplicate labels
-
- Label every part of multi-part features
-
- Feature options
-
- Suppress labeling of features smaller than
-
- mm
mm
- Show all labels for this layer (including colliding labels)
-
- Show upside-down labels
-
- never
nikada
- when rotation defined
-
- always
uvijek
- Limit number of features to be labeled to
-
- Number of features sent to labeling engine, though not all may be labeled
-
Pozicija
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
-
- Show label
-
@@ -32001,15 +31736,15 @@ Ovo može biti problem u vašoj mrežnoj vezi ili na WMS serveru.
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -32017,60 +31752,60 @@ not displayed
&Add Group
-
&Remove
- &Ukloni
+
&Show in overview
-
Re&name
- Preime&nuj
+
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
QgsLegendModel
- Group
Grupiraj
- No Legend Available
-
@@ -32079,13 +31814,13 @@ not displayed
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Styles related to the layer
-
Other styles on the database
-
Select connections to import
-
Export/import error
-
You should select at least one connection from list.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Connection with name '%1' already exists. Overwrite?
-
@@ -32296,20 +32031,20 @@ not displayed
QgsMapCanvas
- canvas
-
- Rendering
Prikazivanje
- Canvas refresh: %1 ms
-
@@ -32366,7 +32101,7 @@ not displayed
Error: qgis element could not be found in %1
-
The directory containing your dataset needs to be writable!
-
Style not found in database
-
ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
Unable to open file %1
-
@@ -32453,7 +32188,7 @@ not displayed
Transform error caught: %1
-
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
@@ -32560,7 +32295,7 @@ not displayed
Several features are selected. Please select only one feature to which an part should be added.
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
New part's geometry is not valid.
-
New polygon ring not disjoint with existing polygons.
-
Validation started.
-
Validation finished.
-
@@ -32675,7 +32410,7 @@ not displayed
Changed properties for label
-
@@ -32696,12 +32431,12 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
No active vector layer
-
No active vector layer
-
To run an action, you must choose a vector layer by clicking on its name in the legend
-
No actions available
-
The active vector layer has no defined actions
-
Coordinate transform error
- Pogreška transofrmacije koordinata
+
Cannot transform the point to the layers coordinate system
- Ne mogu transformirati točku u koordinatni sustav sloja
+
Ring added and filled
-
A problem with geometry type occured
- Došlo je do problema s tipom geometrije
+
The inserted Ring is not closed
- Ubačeni prsten nije zatvoren
+
The inserted Ring is not a valid geometry
- Ubačeni prsten nije valjana geometrija
+
The inserted Ring crosses existing rings
- Ubačeni prsten sječe se s postojćim poligonima
+
The inserted Ring is not contained in a feature
- Ubačeni prsten nije sadržan u elementu
+
An unknown error occured
- Došlo je do nepoznate pogreške
+
Error, could not add ring
- Pogreška, ne može se dodati prsten
+
@@ -32809,12 +32544,12 @@ not displayed
All (%1)
-
No active layer. To identify features, you must choose an active layer.
-
Perimeter
-
no data
-
Identify error
-
@@ -32917,7 +32652,7 @@ not displayed
Moved label
-
@@ -32925,7 +32660,7 @@ not displayed
could not snap to a segment on the current layer.
-
Offset curve
-
Offset:
-
Geometry error
-
Creating offset geometry failed
-
@@ -32961,12 +32696,12 @@ not displayed
Pinned label
-
Unpinned label
-
@@ -32992,7 +32727,7 @@ not displayed
Features Rotated
-
@@ -33000,7 +32735,7 @@ not displayed
Rotated label
-
@@ -33036,12 +32771,12 @@ not displayed
Hid labels
-
Showed labels
-
@@ -33088,12 +32823,12 @@ not displayed
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
@@ -33133,38 +32868,38 @@ not displayed
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
@@ -33202,14 +32937,14 @@ not displayed
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Line offset
-
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -33265,62 +33000,62 @@ not displayed
The calculations are based on:
-
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
@@ -33362,37 +33097,37 @@ not displayed
Whole number (smallint - 16bit)
- Cijeli broj (smallint - 16bit)
+
Whole number (integer - 32bit)
- Cijeli broj (integer - 32bit)
+
Whole number (integer - 64bit)
- Cijeli broj (integer - 64bit)
+
Decimal number (numeric)
- Decimalni broj (numerički)
+
Decimal number (decimal)
- Decimalni broj (decimalno)
+
Decimal number (double)
- Decimalni broj (double)
+
Text, unlimited length (text)
- Tekst, neograničena dužina (text)
+
@@ -33492,11 +33227,7 @@ not displayed
%n more
unread messages
-
- još %n
- još %n
- još %n
-
+ još %n još %n još %n
@@ -33525,7 +33256,7 @@ not displayed
Timestamp
-
Show non-spatial tables
-
%1: Not a vector layer!
-
%1: OK!
-
Import to MSSQL database
-
Failed to import some layers!
-
Import was successful.
- Uvoz je bio uspješan.
+
@@ -33609,7 +33340,7 @@ not displayed
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
-
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
-
Create a New MSSQL connection
-
Name
-
Provider/DSN
-
Trusted Connection
-
Only look in the geometry_columns metadata table
-
Use estimated table parameters
-
@@ -33737,22 +33468,22 @@ not displayed
8 Bytes integer
-
4 Bytes integer
-
2 Bytes integer
-
1 Bytes integer
-
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length unicode (ntext)
-
@@ -33831,7 +33562,7 @@ not displayed
Add MSSQL Table(s)
-
&Set Filter
-
Set Filter
-
Confirm Delete
-
MSSQL Provider
-
Select at id
-
Detecting...
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Enter...
- Unos...
+
Multipolygon
- Višestruki poligon
+
No Geometry
-
Unknown Geometry
-
@@ -34081,22 +33812,22 @@ not displayed
No enhancement
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
Contrast
enhancement
-
Min/max
-
Network request %1 timed out
-
Network
-
@@ -34168,7 +33899,7 @@ enhancement
Cannot find boundary in multipart content type
-
@@ -34176,42 +33907,42 @@ enhancement
Create a new %1 connection
-
all
-
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
@@ -34250,7 +33981,7 @@ Note: giving the password is optional. It will be requested interactivly, when n
DPI-Mode
-
If the service requires basic authentication, enter a user name and optional password
-
Ignore GetFeatureInfo URI reported in capabilities
-
Ignore GetMap/GetTile URI reported in capabilities
-
Ignore axis orientation (WMS 1.3/WMTS)
-
Invert axis orientation
-
Smooth pixmap transform
-
Referer
-
@@ -34436,12 +34167,12 @@ Više informacija o pogrešci:
New SpatiaLite Database File
-
SpatiaLite
-
Failed to load SRIDS: %1
-
Error Creating SpatiaLite Table
-
Failed to create the SpatiaLite table %1. The database returned:
%2
-
Error Creating Geometry Column
-
Failed to create the geometry column. The database returned:
%1
-
Error Creating Spatial Index
-
Failed to create the spatial index. The database returned:
%1
-
New Spatialite Layer
-
Create a new Spatialite database
-
Name for the new layer
-
geometry
-
MultiPoint
-
Multipolygon
- Višestruki poligon
+
Spatial Reference Id
-
Add an integer id field as the primary key for the new layer
-
Create an autoincrementing primary key
-
Name
-
An attribute name
-
Comma Separated Value
-
GML
-
Mapinfo File
-
Save layer as...
- Spremi sloj kao...
+
@@ -34818,7 +34549,7 @@ Više informacija o pogrešci:
File encoding
-
@@ -34826,17 +34557,17 @@ Više informacija o pogrešci:
No query has been specified.
-
There is already a pending request for data.
-
Cannot open output file: %1
-
@@ -34844,12 +34575,12 @@ Više informacija o pogrešci:
Download OpenStreetMap data
-
Extent
- Opseg
+
From layer
-
OpenStreetMap files (*.osm)
-
Download error
-
OpenStreetMap download
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -34927,12 +34658,12 @@ Više informacija o pogrešci:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Polygons (closed ways)
-
Output layer name
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
-
Tag
-
Count
-
SQLite databases (*.db)
-
Unable to open database:
%1
-
OpenStreetMap export
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -35023,12 +34754,12 @@ Više informacija o pogrešci:
OpenStreetMap Import
-
Input XML file (.osm)
-
Output SpatiaLite DB file
-
Create connection (SpatiaLite) after import
-
Connection name
-
OpenStreetMap files (*.osm)
-
SQLite databases (*.db)
-
OpenStreetMap import
-
Output database file exists already. Overwrite?
-
Failed to import OSM data:
%1
-
Import has been successful.
-
@@ -35124,7 +34855,7 @@ Više informacija o pogrešci:
Add Layer(s) from a %1 Server
-
Add selected layers to map
-
Always cache
-
Prefer cache
-
Prefer network
-
Always network
-
Confirm Delete
-
Coordinate Reference System (%n available)
crs count
-
- Koordinatni referentni sustav (%n dostupan)
- Koordinatni referentni sustav (%n dostupno)
- Koordinatni referentni sustav (%n dostupno)
-
+ Koordinatni referentni sustav (%n dostupan) Koordinatni referentni sustav (%n dostupno) Koordinatni referentni sustav (%n dostupno)
Could not understand the response:
%1
-
Tile size
-
Feature limit for GetFeatureInfo
-
Move selected layer UP
-
Move selected layer DOWN
-
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints
-
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Offline Editing Plugin
-
Could not open the spatialite logging database
-
@@ -35503,12 +35230,12 @@ Always network: always load from network and do not check if the cache has a val
Convert to offline project
-
Create offline copies of selected layers and save as offline project
-
&Offline Editing
-
Synchronize
-
Synchronize offline project with remote layers
-
Converting to offline project
-
Synchronizing to remote layers
-
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -35579,12 +35306,12 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
-
SpatiaLite DB
-
Offline Editing Plugin
-
Converting to offline project.
-
Offline database file '%1' exists. Overwrite?
-
@@ -35612,12 +35339,12 @@ Always network: always load from network and do not check if the cache has a val
Create offline project
-
Offline data
-
Select remote layers
-
Show only editable layers
-
@@ -35680,7 +35407,7 @@ Always network: always load from network and do not check if the cache has a val
Data source is invalid, no layer found (%1)
-
Data source is invalid (%1)
-
Date & Time
-
Unknown
-
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
type %1 for field %2 not found
-
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
Feature %1 for attribute update not found.
-
Field %1 of feature %2 doesn't exist.
-
Type %1 of attribute %2 of feature %3 unknown.
-
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
Shapefiles without attribute are considered read-only.
-
@@ -36055,12 +35782,12 @@ Always network: always load from network and do not check if the cache has a val
Options Dialog Template
-
GroupBox
-
@@ -36068,17 +35795,17 @@ Always network: always load from network and do not check if the cache has a val
Identify highlight color
-
not present
-
System value: %1
-
Always
-
If needed
-
Never
-
Load all
-
Check file contents
-
Check extension
-
Basic scan
-
Full scan
-
Cumulative pixel count cut
-
Minimum / maximum
-
Mean +/- standard deviation
-
Select grid color
- Odaberi boju mreže
+
Solid
- Čvrsto
+
Dots
-
Crosses
- Prelazi
+
- Detected active locale on your system: %1
Detektiraj aktivne regionalne postavke na vašem sustavu: %1
- To vertex
Na verteks
- To segment
Na segment
- To vertex and segment
Na verteks i segment
- map units
jedinice mape
- pixels
pikseli
- Semi transparent circle
Poluprozirna kružnica
- Cross
Križić
- None
Nijedan
- QGIS files
-
- Off
-
- QGIS
QGIS
- GEOS
-
- Round
-
- Mitre
-
- Bevel
Zakošeno
- Save default project
-
- You must set a default project
-
- Current project saved as default
-
- Error saving current project as default
-
- Choose a directory to store project template files
-
Show features visible on map
-
- Choose project file to open at launch
-
- Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
-
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
Zapiši preko
- If Undefined
-
- Unset
-
- Prepend
-
- Append
-
- Choose a directory
Odaberi mapu datoteka
- Enter scale
-
- Scale denominator
-
- Load scales
-
- XML files (*.xml *.XML)
XML datoteke (*.xml *.XML)
- Save scales
-
- No Stretch
Nema razvlačenja
- Stretch To MinMax
Razvuci na MinMax
- Stretch And Clip To MinMax
Razvuci i obreži na MinMax
- Clip To MinMax
Obreži na MinMax
None / Planimetric
-
@@ -36419,7 +36146,7 @@ Always network: always load from network and do not check if the cache has a val
General
Općenito
@@ -36427,17 +36154,17 @@ Always network: always load from network and do not check if the cache has a val
System
-
Data Sources
-
Data sources
-
Canvas & Legend
-
Canvas and legend
-
Map Tools
-
GDAL
-
Network
-
Style <i>(QGIS restart required)</i>
-
Icon size
-
Font
- Font
+
Qt default
-
Timeout for timed messages or dialogs
-
s
-
Show tips at start up
-
Bold group box titles
-
QGIS-styled group boxes
-
New
-
Most recent
-
Specific
-
...
...
Open project on launch
-
Create new project from default project
-
Set current project as default
-
Reset default
-
Template folder
-
Browse
- Traži
+
Reset
- Vraćanje
+
Prompt to save project and data source changes when required
-
Prompt for confirmation when a layer is to be removed
-
Enable macros
-
Never
-
Ask
-
For this session only
-
Always (not recommended)
-
QSettings
-
Reset the User Interface settings, to reset QGIS to it's default view
-
Environment
-
Apply
-
Variable
-
Value
- Vrijednost
+
Remove
Ukloni
@@ -36726,34 +36453,34 @@ Always network: always load from network and do not check if the cache has a val
Add
Dodaj
Current environment variables (read-only - bold indicates modified at startup)
-
Show only QGIS-specific variables
-
Use custom variables (restart required - include separators)
-
Plugin paths
-
Path(s) to search for additional C++ plugins libraries
-
Feature attributes and table
-
Open attribute table in a dock window (QGIS restart required)
-
Copy geometry in WKT representation from attribute table
-
Attribute table row cache
-
Representation for NULL values
-
Data source handling
-
Scan for valid items in the browser dock
-
Scan for contents of compressed files (.zip) in browser dock
-
Prompt for raster sublayers when opening
-
Render layers in parallel using many CPU cores
-
Max cores to use:
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Rasters
-
RGB band selection
-
Red band
- Crveni kanal
+
Green band
- Zeleni kanal
+
Blue band
- Plavi kanal
+
Contrast enhancement
-
Single band gray
-
Multi band color (byte / band)
-
Multi band color (> byte / band)
-
Limits (minimum/maximum)
-
Cumulative pixel count cut limits
-
-
- -
+
Standard deviation multiplier
-
Debugging
-
Show these events in the Log Message panel (under Rendering tab)
-
Map canvas refresh
-
Default map appearance (overridden by project properties)
-
Highlight color
-
<html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
Buffer
- Zaštita (Buff)
+
Lines / outlines buffer in millimeters.
-
Minimum width
-
Minimum line / outline width in millimeters.
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
-
-
- Suppress attribute form pop-up after feature creation
-
Use live-updating color chooser dialogs
-
Ignore shapefile encoding declaration
-
Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
Composer
- Kompozer
+
Custom side bar style
-
Add Oracle layers with double click and select in extended mode
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
Simplify on provider side if possible
-
Layer legend
-
Double click action in legend
-
Open layer properties
-
Open attribute table
-
Capitalise layer names
-
Bold layer names
-
Display classification attribute names
-
Bold group names
-
Create raster icons (may be slow)
-
Legend item styles
-
WMS getLegendGraphic Resolution
-
Nautical Miles
-
Map update interval
-
ms
-
Enable feature simplification by default for newly added layers
-
Decimal places
-
Keep base unit
-
Predefined scales
-
Add predefined scale
-
Remove selected
-
Insert default scales
-
Import from file
- Uvezi iz datoteke
+
Export to file
- Izvoz u datoteku
+
Composition defaults
-
Default font
-
Grid appearance
-
Grid style
-
Color...
- Boja...
+
+
+ Grid defaults
+
+
+ Spacing
+
mm
- mm
+
Grid offset
-
x:
- x:
+
y:
- y:
+
Snap tolerance
-
- Guide defaults
+
+
+ Feature creation
-
- Validate geometries
-
- Reuse last entered attribute values
-
- Rubberband
Rubberband
- Line color
Boja linije
- Line width in pixels
Širina linije u pikselima
- Line width
Širina linije
- Snapping
Snepiranje
- Default snap mode
Zadani snep način
- Default snapping tolerance
Zadana tolerancija snepiranja
- Search radius for vertex edits
Radijus pretrage za uređivanje verteksa
- map units
jedinice mape
pixels
pikseli
- Open snapping options in a dock window (QGIS restart required)
-
- Vertex markers
Markeri verteksa
- Marker style
Stil markera
- Marker size
Veličina markera
- Show markers only for selected features
Prikaži markere samo za odabrane elemente
-
- Curve offset tool
-
-
- Miter limit
-
-
- Join style
- Spoji stil
-
Curve offset tool
+
+
+ Miter limit
+
+
+ Join style
+
+
+ Quadrant segments
-
- GDAL driver options
-
- Edit Pyramids Options
-
-
- Edit Create Options
-
-
- GDAL drivers
-
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
-
Name
-
-
- ext
- Edit Create Options
+
GDAL drivers
+
+
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+
+
+ Name
+
+
+ ext
+
+
+ Flags
-
- Description
-
- CRS for new layers
-
- Select...
- Odaberi...
+
- Use &project CRS
-
- Prompt for &CRS
-
- Use default CRS displa&yed below
-
- When a new layer is created, or when a layer is loaded that has no CRS
-
- Default CRS for new projects
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
- Always start new projects with this CRS
-
- Enable 'on the &fly' reprojection by default
-
- Don't enable 'on the fly' reprojection
-
- Default datum transformations
-
- Source CRS
-
- Destination CRS
-
- Source datum transform
-
- Destination datum transform
-
- Ask for datum transformation when no default is defined
-
- Override system locale
Prepiši sistemske lokale
- Locale to use instead
Lokalne vrijednosti za korištenje umjesto
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Napomena:</b> Uključivanje / izmjena prepisivanja lokalnih postavki zahtjeva restart aplikacije
- Additional Info
Dodatni info
- Detected active locale on your system:
Detektiraj aktivne lokalne postavke na vašem sustavu:
- WMS search address
WMS adresa pretraživanja
- Timeout for network requests (ms)
-
- Default expiration period for WMS-C/WMTS tiles (hours)
-
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
Max retry in case of tile request errors
+
+
+ User-Agent
+
+
+ Cache settings
Postavke međuspremnika (cache)
- Directory
Mapa datoteka
- Size [KiB]
-
- Clear
Očisti
- Use proxy for web access
Koristi Proxy za pristup webu
- Host
Domaćin
- Port
Port
- User
Korisnik
- Leave this blank if no proxy username / password are required
Ostavi prazno ako nije potrebno korisničko ime / lozinka
- Password
Lozinka
- Proxy type
Tip Proxy-a
- Exclude URLs (starting with)
-
@@ -37691,7 +37421,7 @@ Always network: always load from network and do not check if the cache has a val
Missing objects
-
@@ -37707,17 +37437,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -37725,7 +37455,7 @@ Missing some of the .ui template objects:
Connection to database failed
-
Oracle
-
SQL:%1
error:%2
-
Database connection was successful, but the accessible tables could not be determined.
-
Unable to get list of spatially enabled tables from the database
-
Unsupported geometry type %1 in %2.%3.%4 ignored
-
View %1.%2 doesn't have integer columns for use as keys.
-
Multipolygon
- Višestruki poligon
+
No Geometry
-
Unknown Geometry
-
@@ -37826,17 +37556,17 @@ error:%2
Delete
-
Refresh
-
Copying features...
-
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to Oracle database
-
Failed to import some layers!
-
Import was successful.
- Uvoz je bio uspješan.
+
@@ -37885,12 +37615,12 @@ error:%2
Delete layer
-
Layer deleted successfully.
-
@@ -37904,7 +37634,7 @@ error:%2
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Create a New Oracle connection
-
Name
-
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Add Oracle GeoRaster Layer...
-
Add a Oracle Spatial GeoRaster...
-
@@ -38101,7 +37831,7 @@ error:%2
Whole big number
-
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
-
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
-
Primary key field %1 not found in %2
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
No key field for query given.
-
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -38585,7 +38315,7 @@ Error: %2
New Connection...
- Nova poveznica...
+
@@ -38626,7 +38356,7 @@ Error: %2
Add Oracle Table(s)
-
&Set Filter
-
Set Filter
-
Confirm Delete
-
Select at id
-
Specify a geometry type
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -38850,12 +38580,12 @@ Error: %2
Refresh
-
Copying features...
-
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to PostGIS database
-
Failed to import some layers!
-
Import was successful.
- Uvoz je bio uspješan.
+
@@ -38904,12 +38634,12 @@ Error: %2
Delete layer
-
Layer deleted successfully.
-
@@ -38917,7 +38647,7 @@ Error: %2
New Connection...
- Nova poveznica...
+
@@ -38958,7 +38688,7 @@ Error: %2
Label
- Oznaka
+
@@ -39025,32 +38755,32 @@ Error: %2
Solid Line
-
No Pen
-
Dash Line
-
Dot Line
-
Dash Dot Line
-
Dash Dot Dot Line
-
@@ -39084,7 +38814,7 @@ Error: %2
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
Only show layers in the layer registries
-
Don't resolve type of unrestricted columns (GEOMETRY)
-
@@ -39282,12 +39012,12 @@ Error: %2
&Set Filter
-
Set Filter
-
Enter...
- Unos...
+
@@ -39424,12 +39154,12 @@ Error: %2
Data Type
-
Spatial Type
-
Primary Key
-
Select at id
-
Select a primary key
- Odaberi primarni ključ
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Specify a geometry type
-
Enter a SRID
- Unesi SRID
+
Enter...
- Unos...
+
@@ -39489,32 +39219,32 @@ Error: %2
Form
- Obrazac
+
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- Širina
+
Height
- Visina
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39522,12 +39252,12 @@ Error: %2
Select a picture
-
...
- ...
+
@@ -39550,47 +39280,47 @@ Error: %2
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
-
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
@@ -39609,7 +39339,7 @@ Error: %2
Dodatak je nestao
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
Dodatak je izgleda bio instaliran, ali na nepoznatu lokaciju. Vjerojatno je paket sadržavao krivo imenovanu mapu.
Pretražite popis instaliranih dodataka. Gotovo sam siguran da ćete tamo pronaći dodatak, samo ne mogu drediti koji je točno. Ovo također znači da ne mogu odrediti je li dodatak instaliran i informirati vas o dostupnim nadogradnjama. No, dodatak može raditi. Kontaktirajte autora dodatka i objasnite situaciju.
@@ -39625,11 +39355,11 @@ Pretražite popis instaliranih dodataka. Gotovo sam siguran da ćete tamo prona
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
@@ -39661,11 +39391,11 @@ You need to restart QGIS in order to reload it.
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
@@ -39673,11 +39403,11 @@ You need to restart QGIS in order to reload it.
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
QGIS Official Plugin Repository
-
Nothing to remove! Plugin directory doesn't exist:
@@ -39857,7 +39587,7 @@ You need to restart QGIS in order to reload it.
Name
-
?qgis=
-
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
-
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
Installable
category: plugins that are available for installation
-
This plugin is incompatible with this version of QGIS
-
Plugin designed for QGIS %1
compatible QGIS version(s)
-
There is a new version available
-
This is a new plugin
-
Installed version of this plugin is higher than any version found in repository
-
This plugin is experimental
-
This plugin is deprecated
-
More info
-
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Reload all repositories
-
Only show plugins from selected repository
-
Clear filter
-
The repository is connected
-
The repository is enabled, but unavailable
-
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
@@ -40183,57 +39913,57 @@ You need to restart QGIS in order to reload it.
Plugin Manager
-
All
- Sve
+
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
New
-
Not installed plugins seen for the first time
-
Invalid
-
Broken and incompatible installed plugins
-
Not installed
-
about:blank
- o:prazno
+
Upgrade all upgradeable plugins
-
Upgrade all
-
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40356,21 +40086,21 @@ p, li { white-space: pre-wrap; }
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Name
-
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Delete
-
@@ -40455,7 +40185,7 @@ p, li { white-space: pre-wrap; }
The point displacement renderer only applies to (single) point layers.
'%1' is not a point layer and cannot be displayed by the point displacement renderer
-
@@ -40468,7 +40198,7 @@ p, li { white-space: pre-wrap; }
Center symbol:
-
Renderer settings...
-
Displacement circles
-
Circle pen width:
-
Circle radius modification:
-
Point distance tolerance:
-
Label attribute:
-
Use scale dependent labelling
-
max scale denominator:
-
@@ -40544,7 +40274,7 @@ p, li { white-space: pre-wrap; }
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Horizontal distance
-
Vertical distance
-
Horizontal displacement
-
Vertical displacement
-
@@ -40580,7 +40310,7 @@ p, li { white-space: pre-wrap; }
Connection to database failed
-
error in setting encoding
-
undefined return value from encoding setting
-
Your database has no working PostGIS support.
-
Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net)
-
Database connection was successful, but the accessible tables could not be determined.
-
Database connection was successful, but the accessible tables could not be determined. The error message from the database was:
%1
-
Database connection was successful, but the accessible tables could not be determined.
The error message from the database was:
%1
-
Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry.
-
Unable to get list of spatially enabled tables from the database
-
Retrieval of postgis version failed
-
Could not parse postgis version string '%1'
-
Connection error: %1 returned %2 [%3]
-
Erroneous query: %1 returned %2 [%3]
-
Query failed: %1
Error: no result buffer
-
Query: %1 returned %2 [%3]
-
%1 cursor states lost.
SQL: %2
Result: %3 (%4)
-
resetting bad connection.
-
retry after reset succeeded.
-
retry after reset failed again.
-
connection still bad after reset.
-
bad connection, not retrying.
-
Multipolygon
- Višestruki poligon
+
No Geometry
-
Unknown Geometry
-
Geography
-
TopoGeometry
-
Query could not be canceled [%1]
-
PQgetCancel failed
-
@@ -40808,7 +40538,7 @@ Result: %3 (%4)
invalid PostgreSQL layer
-
invalid PostgreSQL topology layer
-
PostgreSQL layer has no primary key.
-
PostgreSQL layer has unknown primary key type.
-
Read attempt on an invalid postgresql data source
-
FAILURE: Field %1 not found.
-
unexpected formatted field type '%1' for field %2
-
Field %1 ignored, because of unsupported type %2
-
Field %1 ignored, because of unsupported type type %2
-
Duplicate field %1 found
-
PostgreSQL is still in recovery after a database crash
(or you are connected to a (read-only) slave).
Write accesses will be denied.
-
The custom query is not a select query.
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
Unexpected relation type '%1'.
-
No key field for query given.
-
Could not find topology of layer %1.%2.%3
-
PostGIS error while adding features: %1
-
PostGIS error while deleting features: %1
-
PostGIS error while adding attributes: %1
-
PostGIS error while deleting attributes: %1
-
PostGIS error while changing attributes: %1
-
PostGIS error while changing geometry values: %1
-
result of extents query invalid: %1
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
PostgreSQL version: unknown
-
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -41094,7 +40824,7 @@ PostGIS %2
Loading layer %1
-
Project File Read Error
-
%1 is not writable. Please adjust permissions (if possible) and try again.
-
Ignore
-
Unable to open one or more project layers.
Choose ignore to continue loading without the missing layers. Choose cancel to return to your pre-project load state. Choose OK to try to find the missing layers.
-
@@ -41161,22 +40891,22 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select project file
-
QGIS files
-
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -41184,12 +40914,12 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select layers and groups to embed
-
Project file
-
QgsProjectProperties
- Layer
Sloj
- Type
Tip
- Identifiable
Može se identificirati
- Vector
Vektor
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
-
- No coordinate systems selected. Disabling restriction.
-
- Selection color
Boja odabira
- Measure tool (CRS transformation: %1)
-
- Canvas units (CRS transformation: %1)
-
+ OFF
-
+ ON
-
- CRS %1 was already selected
-
+
+ Coordinate System Restrictions
+
Coordinate System Restrictions
-
-
- The current selection of coordinate systems will be lost.
Proceed?
-
- Select print composer
-
- Composer Title
-
- Select restricted layers and groups
-
+
+ Enter scale
+
Enter scale
- Scale denominator
+
- Scale denominator
- Load scales
+
Load scales
-
-
- XML files (*.xml *.XML)
XML datoteke (*.xml *.XML)
- Save scales
-
- Select a valid symbol
-
- Invalid symbol :
-
- Parameters:
- Parametri:
+
+ Select %1 from pull-down menu to adjust radii
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
-
@@ -41373,7 +41103,6 @@ Proceed?
Project title
Naslov projekta
@@ -41413,37 +41142,37 @@ Proceed?
Spremi putanje
- Measure tool
Alat mjerenja
- Semi-minor
-
+
+ Semi-major
+
Semi-major
-
-
- Used when CRS transformation is turned off
-
- Canvas units
-
- Meters
Metri
- Feet
Stope
@@ -41460,112 +41189,112 @@ Proceed?
Identify layers
-
Default styles
-
OWS server
-
- Ellipsoid
(for distance calculations)
-
- Degree
-
- Degree display
-
- Decimal degrees
Decimalni stupnjevi
- Degrees, Minutes
-
- Degrees, Minutes, Seconds
Stupnjevi, minute, sekunde
- Precision
Preciznost
- Automatically sets the number of decimal places in the mouse position display
Automatski postavlja broj decimalnih mjesta u prikazu pozicije miša
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Broj decimalnih mjesta koja se koriste kod prikazivanja pozicije miša automatski se potavlja tako da pomak miša za jedan piksel izaziva promjenu u prikazu pozicije
- Automatic
Automatski
- Sets the number of decimal places to use for the mouse position display
Postavlja broj decimalnih mjesta za korištenje u prikazu pozicije miša
- Manual
Ručno
- The number of decimal places for the manual option
Broj decimalnih mjesta za ručnu opciju
- decimal places
decimalnih mjesta
- Project scales
-
- ...
...
- Enable 'on the fly' CRS transformation
Omogući CRS transformaciju 'u letu'
@@ -41575,242 +41304,237 @@ Proceed?
Slojevi koji se mogu identificirati
- Project layers
-
- Layer
Sloj
- Type
Tip
- Identifiable
Može se identificirati
- Marker
Marker
- Line
Linija
- Default symbols
-
- Fill
-
- Color Ramp
Rampa boja
- Transparency
Transparentnost
- %
-
- Style Manager
Upravljač stilova
- Options
Opcije
Relations
-
- Project file
-
-
- Nautical miles
-
- Assign random colors to symbols
-
- Service capabilities
-
- Person
-
- Title
Naslov
- Organization
-
- Online resource
-
- E-Mail
-
- Phone
-
- Abstract
Sažetak
- Fees
Naknade
- Access constraints
-
- Keyword list
-
- WMS capabilities
-
- Add geometry to feature response
-
- Min. X
Min. X
- Min. Y
Min. Y
- Max. X
Max. X
- Max. Y
Max. Y
- Use Current Canvas Extent
-
- Used
-
- Exclude composers
-
- WFS capabilities
-
- WCS capabilities
-
- Exclude layers
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
- Published
-
- Update
Osvježi
- Insert
-
- Delete
-
- Unselect all
Deselektiraj sve
- Select all
Odaberi sve
@@ -41818,44 +41542,44 @@ Proceed?
Macros
-
- Advertised URL
-
- Width
Širina
- Height
Visina
- Maximums for GetMap request
-
- Advertised extent
-
- CRS restrictions
-
- Python macros
-
@@ -41905,7 +41629,7 @@ Zbog ovoga neće raditi odabir projekcije...
Recently used coordinate reference systems
-
Selected CRS:
-
Coordinate reference systems of the world
-
Hide deprecated CRSs
-
@@ -41956,7 +41680,7 @@ Zbog ovoga neće raditi odabir projekcije...
Set provider filter on %1
-
The where clause returned %n row(s).
returned test rows
-
- Where rečenica vratila je %n redak.
- Where rečenica vratila je %n retka.
- Where rečenica vratila je %n retka.
-
+ Where rečenica vratila je %n redak. Where rečenica vratila je %n retka. Where rečenica vratila je %n retka.
An error occurred when executing the query.
-
The data provider said:
%1
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42043,7 +41763,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42054,7 +41774,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42070,7 +41790,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42085,7 +41805,7 @@ p, li { white-space: pre-wrap; }
Use unfiltered layer
-
Provider specific filter expression
-
@@ -42174,29 +41894,29 @@ p, li { white-space: pre-wrap; }
Editable
- Može se urediti
+
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42204,32 +41924,32 @@ p, li { white-space: pre-wrap; }
Form
- Obrazac
+
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Maximum
- Maksimum
+
Minimum
- Minimum
+
Local minimum/maximum = 0/0
-
@@ -42260,12 +41980,12 @@ p, li { white-space: pre-wrap; }
Raster bands
-
Result layer
-
Raster calculator expression
-
@@ -42443,7 +42163,7 @@ p, li { white-space: pre-wrap; }
Format not supported
-
No compression
-
Low compression
-
High compression
-
JPEG compression
-
Cannot get create options for driver %1
-
For details on pyramids options please see the following pages
-
No help available
-
cannot validate pyramid options
-
Cannot validate creation options
-
Valid
-
pyramid creation option
-
creation option
-
Profile name:
-
Use simple interface
-
Use table interface
-
@@ -42635,52 +42355,52 @@ Click on help button to get valid creation options for this format.
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Show all bands
-
Show RGB/Gray band(s)
-
Show selected band
-
Display
- Prikaz
+
Draw as lines
-
Draw as lines (only int layers)
-
Load min/max
-
Use stddev (1.0)
-
Use stddev (custom)
-
Load for each band
-
Recompute Histogram
-
Set min/max style for
-
Pick Min value on graph
-
Pick Max value on graph
-
Prefs/Actions
-
Save plot
-
Save as image...
-
Compute Histogram
-
@@ -42814,17 +42534,17 @@ Click on help button to get valid creation options for this format.
Build Pyramids
-
Create Datasources
-
Remove Datasources
-
Data Type
-
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
<maplayer> not found.
-
@@ -43137,7 +42857,7 @@ Click on help button to get valid creation options for this format.
From
-
not defined
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Textfile
-
Load layer properties from style file
-
QGIS Layer Style File
-
Save layer properties as style file
-
@@ -43334,7 +43054,7 @@ Click on help button to get valid creation options for this format.
Resolutions
-
Render type
-
Resampling
-
Oversampling
-
Layer info
-
Description
-
Keyword list
-
Attribution
-
Url
-
MetadataUrl
-
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Band rendering
-
Color rendering
-
Off
-
By lightness
-
By luminosity
-
By average
-
Blending mode
-
Brightness
-
Contrast
-
Colorize
-
Strength
-
Reset all color rendering options to default
-
Zoomed: in
-
out
-
Use original source no data value.
-
No data value:
-
Original data source no data value, if exists.
-
<src no data value>
-
Additional user defined no data value.
-
Additional no data value
-
Add values from display
-
displayed as
-
No Data
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Overview format
-
External
-
Internal (if possible)
-
External (Erdas Imagine)
-
From
-
Select output directory
-
The directory %1 contains files which will be overwritten: %2
-
Select output file
-
GeoTIFF
- GeoTIFF
+
layer
-
user defined
-
Resolution (current: %1)
-
Layer (%1, %2)
-
Project (%1, %2)
-
Selected (%1, %2)
-
@@ -43872,32 +43592,32 @@ p, li { white-space: pre-wrap; }
Save raster layer as...
-
Output mode
-
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
Create VRT
-
Browse...
-
Extent
- Opseg
+
Layer resolution
-
Layer size
-
VRT Tiles
-
Maximum number of columns in one tile.
-
Max columns
-
Maximum number of rows in one tile.
-
Max rows
-
Create Options
-
Resolutions
-
Pyramid resolutions corresponding to levels given
-
Use existing
-
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
-
Load user defined fully transparent (100%) values
-
No option selected
-
Please select an option to load min/max values.
-
@@ -44089,7 +43809,7 @@ datasets with maximum width and height specified below.
Load min/max values
-
Min / max
-
Extent
- Opseg
+
Full
-
Accuracy
-
Cumulative
count cut
-
Mean +/-
standard deviation ×
-
Load
-
@@ -44164,32 +43884,32 @@ standard deviation ×
Insert positive integer values separated by spaces
-
External (GTiff .ovr)
-
Internal (if possible)
-
External (Erdas Imagine .aux)
-
Levels
-
Create Options
-
Custom levels
-
Overview format
-
@@ -44247,7 +43967,7 @@ standard deviation ×
cumulative cut
-
Export Frequency distribution as csv
-
Export Colors and elevations as xml
-
Import Colors and elevations from xml
-
Error opening file
-
The relief color file could not be opened
-
Error parsing xml
-
The xml file could not be loaded
-
Enter lower elevation class bound
-
Enter upper elevation class bound
-
Select color for relief class
-
@@ -44340,12 +44060,12 @@ standard deviation ×
Dialog
-
Elevation layer
-
Z factor
-
Illumination
-
Azimuth (horizontal angle)
-
Vertical angle
-
Relief colors
-
Create automatically
-
Export distribution...
-
Lower bound
-
Upper bound
-
Export colors...
-
Import colors...
-
@@ -44453,7 +44173,7 @@ standard deviation ×
Terrain analysis
-
Hillshade
-
Relief
-
Calculating hillshade...
-
Calculating relief...
-
Calculating slope...
-
Calculating aspect...
-
Ruggedness
-
Calculating ruggedness...
-
@@ -44529,7 +44249,7 @@ standard deviation ×
Preview Expression
-
@@ -44537,32 +44257,32 @@ standard deviation ×
Dialog
-
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -44570,19 +44290,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -44590,7 +44310,7 @@ standard deviation ×
[Generated automatically]
-
@@ -44598,37 +44318,37 @@ standard deviation ×
Add relation
-
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
-
Id
- Id
+
@@ -44636,43 +44356,43 @@ standard deviation ×
Form
- Obrazac
+
Toggle editing
-
New
-
Delete
-
Link
-
Unlink
-
Form View
-
Table View
-
@@ -44680,47 +44400,47 @@ standard deviation ×
Dialog
-
Name
-
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
- Id
+
Add Relation
-
Remove Relation
-
@@ -44728,17 +44448,17 @@ standard deviation ×
Open Form
-
(no selection)
-
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -44746,7 +44466,7 @@ standard deviation ×
Rule properties
-
Scale range
-
Filter expression parsing error:
-
Evaluation error
-
Filter returned %n feature(s)
number of filtered features
-
-
+
@@ -44816,24 +44532,24 @@ standard deviation ×
Rotation field
-
Size scale field
-
Scale area
-
Scale diameter
-
- expression -
-
- no field -
-
@@ -44865,22 +44581,22 @@ standard deviation ×
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
Copy
- Kopiraj
+
Paste
- Zalijepi
+
Change color
-
Change transparency
-
Change output unit
-
Change width
-
Change size
-
Change symbol transparency [%]
-
Symbol unit
-
Select symbol unit
-
Change symbol width
-
Change symbol size
-
@@ -44982,12 +44698,12 @@ standard deviation ×
(no filter)
-
<li><nobr>%1 features also in rule %2</nobr></li>
-
Rule
-
Min. scale
-
Count
-
Duplicate count
-
Max. scale
-
Number of features in this rule.
-
Number of features in this rule which are also present in other rule(s).
-
@@ -45035,83 +44751,83 @@ standard deviation ×
Add rule
-
Edit rule
-
Remove rule
-
Refine current rules
-
Count features
-
Rendering order...
-
Remove Rule
-
Refine current rule
-
Add scales to rule
-
Add categories to rule
-
Add ranges to rule
-
Refine a rule to categories
-
Refine a rule to ranges
-
Scale refinement
-
Parent rule %1 must have a symbol for this operation.
-
Please enter scale denominators at which will split the rule, separate them by commas (e.g. 1000,5000):
-
"%1" is not valid scale denominator, ignoring it.
-
Calculating feature count.
-
Database does not exist
-
Failed to open database
-
Failed to check metadata
-
Failed to get list of tables
-
Unknown error
-
Delete
-
%1: Not a vector layer!
-
%1: OK!
-
Import to SpatiaLite database
-
Failed to import some layers!
-
Import was successful.
- Uvoz je bio uspješan.
+
@@ -45233,12 +44949,12 @@ standard deviation ×
Delete layer
-
Layer deleted successfully.
-
@@ -45246,7 +44962,7 @@ standard deviation ×
New Connection...
- Nova poveznica...
+
New SpatiaLite Database File
-
SpatiaLite
-
Create SpatiaLite database
-
The database has been created
-
Failed to create the database:
-
@@ -45286,7 +45002,7 @@ standard deviation ×
Texture width
-
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Select SVG texture file
-
All files
- Sve datoteke
+
Save style in database
-
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
@@ -45375,37 +45091,37 @@ standard deviation ×
Save style
-
Description
-
UI
-
Style Name
-
Use as default style for this layer
-
Open...
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45414,29 +45130,29 @@ standard deviation ×
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -45444,7 +45160,7 @@ standard deviation ×
Scale visibility
-
@@ -45467,22 +45183,22 @@ standard deviation ×
&Save...
-
Save query to an xml file
-
&Load...
-
Load query from xml file
-
Found %n matching feature(s).
test result
-
- Pronađen %n odgovarajući element.
- Pronađen %n odgovarajući element.
- Pronađen %n odgovarajućih elemenata.
-
+ Pronađen %n odgovarajući element. Pronađen %n odgovarajući element. Pronađen %n odgovarajućih elemenata.
Evaluation error
-
Save query to file
-
Could not open file for writing
-
Load query from file
-
Query files
-
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
Select attribute
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -45589,17 +45301,13 @@ standard deviation ×
Validation started.
-
Validation finished (%n error(s) found).
number of geometry errors
-
-
+
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Color (start)
-
Color (end)
-
Blur radius
-
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -45731,13 +45439,13 @@ Pogreška je:
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Color
-
Pen width
- Širina pera
+
Dash pattern
-
Join style
- Spoji stil
+
Cap style
- Cap stil
+
@@ -45809,14 +45517,14 @@ Pogreška je:
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -45864,32 +45572,32 @@ Pogreška je:
Black to white
-
White to black
-
No enhancement
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
@@ -45903,7 +45611,7 @@ Pogreška je:
Contrast
enhancement
-
Color gradient
-
@@ -45957,7 +45665,7 @@ enhancement
Continuous
-
The color map for band %1 has no entries
-
Sort colormap items
-
Invert
-
Min / max origin:
-
Min / Max origin
-
@@ -46178,32 +45886,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -46216,7 +45924,7 @@ enhancement
The Symbol
-
@@ -46224,22 +45932,22 @@ enhancement
ALL the constraints
-
any ONE of the constraints
-
Invalid name
-
The smart group name field is empty. Kindly provide a name
-
@@ -46247,27 +45955,27 @@ enhancement
Smart Group Editor
-
Smart Group Name
-
Condition matches
-
Add Condition
-
Conditions
-
@@ -46335,12 +46043,12 @@ enhancement
Avoid Int.
-
Avoid intersections of new polygons
-
Enable snapping on intersection
-
@@ -46358,7 +46066,7 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
UNKNOWN
-
GEOMETRY
-
POINT
-
LINESTRING
-
POLYGON
-
MULTIPOINT
-
MULTILINESTRING
-
MULTIPOLYGON
-
GEOMETRYCOLLECTION
-
@@ -46449,7 +46157,7 @@ enhancement
Retrieval of spatialite version failed
-
SpatiaLite
-
Could not parse spatialite version string '%1'
-
SQLite error: %2
SQL: %1
-
unknown cause
-
FAILURE: Field %1 not found.
-
@@ -46541,12 +46249,12 @@ SQL: %1
Databases
- Baze podataka
+
&Update statistics
-
&Set Filter
-
Confirm Update Statistics
-
Update Statistics
-
Internal statistics successfully updated for: %1
-
Error while updating internal statistics for: %1
-
SpatiaLite DB
-
Error
- Pogreška
+
Cannot add connection '%1' : a connection with the same name already exists.
-
Database does not exist: %1
-
SpatiaLite Error
-
Unexpected error when working with: %1
%2
-
@@ -46784,17 +46492,13 @@ but implies better performance thereafter.
The spatial query requires at least two vector layers
-
%n selected geometries
selected geometries
-
- %n odabrana geometrija
- %n odabrane geometrije
- %n odabranih geometrija
-
+ %n odabrana geometrija %n odabrane geometrije %n odabranih geometrija
%1)Query
-
Begin at %L1
-
Total of features = %1
-
Total of invalid features:
-
Finish at %L1 (processing time %L2 minutes)
-
Using the field "%1" for subset
-
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
%1 of %2(selected features)
-
Create new selection
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
user
-
Map "%1" "on the fly" transformation.
-
enable
-
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Create new layer from items
-
The query from "%1" using "%2" in field not possible.
-
Create new layer from selected
-
%1 of %2 identified
-
@@ -46988,7 +46692,7 @@ CRS of map is %1.
Select source features from
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47017,7 +46721,7 @@ p, li { white-space: pre-wrap; }
Where the feature
-
Reference features of
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47055,43 +46759,43 @@ p, li { white-space: pre-wrap; }
And use the result to
-
Selected features
-
Number of selected features in map
-
Create layer with selected
-
Result feature ID's
-
Select one FID to identify geometry of feature
-
Create layer with list of items
-
Zoom to item
-
Log messages
-
Query not executed
-
Select a Spatialite Spatial Reference System
-
Authority
-
Reference Name
-
Shapefiles
- Shapefiles
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47673,14 +47377,155 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
QgsSqlAnywhereProvider
+ Failed to load interface
+
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
- Nepoznat geometrijski tip
+ Nepoznat geometrijski tip
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
@@ -47698,22 +47543,22 @@ p, li { white-space: pre-wrap; }
Import style(s)
-
file specified below
-
URL specified below
-
Select symbols to import
-
Export style(s)
-
Export/import error
-
You should select at least one symbol/color ramp.
-
Save styles
-
Error when saving selected symbols to file:
%1
-
Import error
-
An error occured during import:
%1
-
Group Name
-
Please enter a name for new group:
-
imported
-
New Group
-
New group cannot be created without a name. Kindly enter a name.
-
New group
-
Cannot create a group without name. Enter a name.
-
Duplicate names
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
-
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
-
Load styles
-
Downloading style ...
-
HTTP Error!
-
Styles import/export
-
Import from
-
Save to group
-
Select symbols to export
-
@@ -47880,12 +47725,12 @@ Overwrite?
Type here to filter symbols...
-
Share Menu
-
Group Actions
-
Group Symbols
-
Edit Smart Group
-
Marker symbol (%1)
-
Line symbol (%1)
-
Fill symbol (%1)
-
Color ramp (%1)
-
Gradient
-
Random
-
ColorBrewer
-
cpt-city
-
new symbol
-
new marker
-
new line
-
new fill symbol
-
Symbol Name
-
Please enter a name for new symbol:
-
Save symbol
-
Cannot save symbol without name. Enter a name.
-
Symbol with name '%1' already exists. Overwrite?
-
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Color Ramp Name
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Cannot save color ramp without name. Enter a name.
-
Save color ramp
-
Color ramp with name '%1' already exists. Overwrite?
-
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
-
Invalid selection
-
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Add Group
-
Remove Group
-
Apply Group
-
Un-group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
@@ -48213,12 +48058,12 @@ There was a problem with your symbol database.
Fill
-
Color ramp
-
Edit
-
Share
-
@@ -48256,7 +48101,7 @@ There was a problem with your symbol database.
Select vector layers to add...
-
Number of features
-
Select raster layers to add...
-
Select layers to add...
-
Select All
- Odaberi sve
+
@@ -48321,12 +48166,12 @@ There was a problem with your symbol database.
SVG annotation
-
Delete
-
SVG files
- SVG datoteke
+
@@ -48344,23 +48189,23 @@ There was a problem with your symbol database.
SVG request failed [error: %1 - url: %2]
-
SVG
- SVG
+
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -48368,17 +48213,17 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48388,14 +48233,14 @@ There was a problem with your symbol database.
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -48453,12 +48298,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -48484,17 +48329,17 @@ There was a problem with your symbol database.
Size
- Veličina
+
area
- površina
+
diameter
-
@@ -48520,7 +48365,7 @@ There was a problem with your symbol database.
Define the order in which the symbol layers are rendered. The numbers in the cells define in which rendering pass the layer will be drawn.
-
@@ -48528,27 +48373,27 @@ There was a problem with your symbol database.
Symbol name
- Naziv simbola
+
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
@@ -48586,12 +48431,12 @@ There was a problem with your symbol database.
Save symbol
-
Save
- Spremi
+
@@ -48599,42 +48444,42 @@ There was a problem with your symbol database.
Millimeter
- Milimetar
+
Map unit
- Jedinice mape
+
Symbol name
- Naziv simbola
+
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
Transparency %1%
-
@@ -48702,7 +48547,7 @@ There was a problem with your symbol database.
Annotation text
-
Form
- Obrazac
+
Multiline
- Višestruke linije
+
HTML
-
@@ -48743,7 +48588,7 @@ There was a problem with your symbol database.
Tile scale
-
@@ -48751,172 +48596,172 @@ There was a problem with your symbol database.
QGIS Publications
-
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
Become an QGIS translator
-
QGIS Mailing lists
-
Is it 'QGIS' or 'Quantum GIS'?
-
QGIS is open source
-
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
Moving Elements and Maps in the Print Composer
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -48937,21 +48782,21 @@ There was a problem with your symbol database.
QGIS Tips!
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
-
I've had enough tips, don't show this on start up any more!
-
@@ -49067,7 +48912,7 @@ p, li { white-space: pre-wrap; }
Generate pdf report:
-
Create world file
-
Generate pdf map:
-
Thin Plate Spline
-
Projective
-
Invalid output file name
-
Select save PDF file
-
Form
- Obrazac
+
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Editable
- Može se urediti
+
@@ -49203,12 +49048,12 @@ p, li { white-space: pre-wrap; }
Form
- Obrazac
+
Adjust scaling range
-
@@ -49216,18 +49061,18 @@ p, li { white-space: pre-wrap; }
Select a file
-
Error
- Pogreška
+
Could not open file %1
Error was:%2
-
@@ -49235,37 +49080,37 @@ Error was:%2
Form
- Obrazac
+
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
-
Value
- Vrijednost
+
Description
-
Remove Selected
-
@@ -49273,7 +49118,7 @@ Error was:%2
Edit filter expression
-
@@ -49281,52 +49126,52 @@ Error was:%2
Form
- Obrazac
+
Select layer, key column and value column
-
Layer
- Sloj
+
Key column
- Ključna kolona
+
Value column
-
Allow null value
-
Order by value
-
Allow multiple selections
-
Filter expression
-
...
- ...
+
@@ -49334,7 +49179,7 @@ Error was:%2
(no selection)
-
@@ -49347,12 +49192,12 @@ Error was:%2
Scheme name
-
Colors
-
Codec %1 not found. Falling back to system locale
-
Add Features
-
Delete Features
-
Change Attribute Values
-
Add Attributes
-
Fast Access to Features at ID
-
Change Geometries
-
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -49423,27 +49268,27 @@ Error was:%2
X attribute
-
Y attribute
-
Length attribute
-
Angle attribute
-
Height attribute
-
@@ -49456,41 +49301,41 @@ Error was:%2
Continuous
-
Gradient file : %1
-
License file : %1
-
Edit Stop Color
-
Offset of the stop
-
Please enter offset in percents (%) of the new stop
-
Add Color Stop
-
@@ -49514,7 +49359,7 @@ Error was:%2
Change...
-
Multiple stops
-
Add stop
-
Remove stop
-
Offset (%)
-
Information
-
@@ -49583,7 +49428,7 @@ Error was:%2
Commit errors:
%1
-
Layer comment
-
Storage type of this layer
-
Description of this provider
-
Source for this layer
-
Geometry type of the features in this layer
-
Primary key attributes
-
The number of features in this layer
-
Editing capabilities of this layer
-
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
Error: qgis element could not be found
-
unknown extent
-
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- USPJEH: %n atribut izbrisan.
- USPJEH: %n atributa izbrisano.
- USPJEH: %n atributa izbrisano.
-
+ USPJEH: %n atribut izbrisan. USPJEH: %n atributa izbrisano. USPJEH: %n atributa izbrisano.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- POGREŠKA: %n atribut nije izbrisan.
- POGREŠKA: %n atributa nisu izbrisani.
- POGREŠKA: %n atributa nije izbrisano.
-
+ POGREŠKA: %n atribut nije izbrisan. POGREŠKA: %n atributa nisu izbrisani. POGREŠKA: %n atributa nije izbrisano.
SUCCESS: %n attribute(s) added.
added attributes count
-
- USPJEH: %n atribut dodan.
- USPJEH: %n atributa dodano.
- USPJEH: %n atributa dodano.
-
+ USPJEH: %n atribut dodan. USPJEH: %n atributa dodano. USPJEH: %n atributa dodano.
ERROR: %n new attribute(s) not added
not added attributes count
-
- POGREŠKA: %n novi atribut nije dodan
- POGREŠKA: %n novih atributa nije dodano
- POGREŠKA: %n novih atributa nije dodano
-
+ POGREŠKA: %n novi atribut nije dodan POGREŠKA: %n novih atributa nije dodano POGREŠKA: %n novih atributa nije dodano
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- USPJEH: %n atributna vrijednost izmijenjena.
- USPJEH: %n atributne vrijednosti izmijenjene.
- USPJEH: %n atributnih vrijednosti izmijenjeno.
-
+ USPJEH: %n atributna vrijednost izmijenjena. USPJEH: %n atributne vrijednosti izmijenjene. USPJEH: %n atributnih vrijednosti izmijenjeno.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- POGREŠKA: %n promjena atributnih vrijednosti nije primjenjena.
- POGREŠKA: %n promjene atributnih vrijednosti nisu primjenjene.
- POGREŠKA: %n promjena atributnih vrijednosti nije primjenjeno.
-
+ POGREŠKA: %n promjena atributnih vrijednosti nije primjenjena. POGREŠKA: %n promjene atributnih vrijednosti nisu primjenjene. POGREŠKA: %n promjena atributnih vrijednosti nije primjenjeno.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- USPJEH: %n element izbrisan.
- USPJEH: %n elementa izbrisana.
- USPJEH: %n elementa izbrisana.
-
+ USPJEH: %n element izbrisan. USPJEH: %n elementa izbrisana. USPJEH: %n elementa izbrisana.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- POGREŠKA: %n element nije izbrisan.
- POGREŠKA: %n elementa nisu izbrisana.
- POGREŠKA: %n elementa nisu izbrisana.
-
+ POGREŠKA: %n element nije izbrisan. POGREŠKA: %n elementa nisu izbrisana. POGREŠKA: %n elementa nisu izbrisana.
SUCCESS: %n feature(s) added.
added features count
-
- USPJEH: %n element dodan.
- USPJEH: %n elementa dodana.
- USPJEH: %n elementa dodano.
-
+ USPJEH: %n element dodan. USPJEH: %n elementa dodana. USPJEH: %n elementa dodano.
ERROR: %n feature(s) not added.
not added features count
-
- POGREŠKA: %n element nije dodan.
- POGREŠKA: %n elementa nisu dodana.
- POGREŠKA: %n elemenata nije dodano.
-
+ POGREŠKA: %n element nije dodan. POGREŠKA: %n elementa nisu dodana. POGREŠKA: %n elemenata nije dodano.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
- USPJEH: %n geometrija izmjenjena.
- USPJEH: %n geometrije izmjenjene.
- USPJEH: %n geometrija izmjenjeno.
-
+ USPJEH: %n geometrija izmjenjena. USPJEH: %n geometrije izmjenjene. USPJEH: %n geometrija izmjenjeno.
ERROR: %n geometries not changed.
not changed geometries count
-
- POGREŠKA: %n geometrija nije izmjenjena.
- POGREŠKA: %n geometrije nisu izmjenjene.
- POGREŠKA: %n geometrija nije izmjenjeno.
-
+ POGREŠKA: %n geometrija nije izmjenjena. POGREŠKA: %n geometrije nisu izmjenjene. POGREŠKA: %n geometrija nije izmjenjeno.
Provider errors:
-
@@ -49884,14 +49677,14 @@ Error was:%2
QGIS Layer Style File
-
SLD File
-
Load from database
-
Save in database (%1)
-
Stop editing mode to enable this.
-
Insert expression
-
Not supported
- Nije podržano
+
Load default style from:
-
Local database
-
Datasource database
-
Loaded from Provider
-
No default style was found for this layer
-
Save default style to:
-
Load layer properties from style file
-
Load Style
- Učitaj stil
+
Style saved
-
Save layer properties as style file
-
Error occured retrieving styles from database
-
The retrieved style is not a valid named style. Error message: %1
-
Save Style
-
@@ -50064,32 +49857,32 @@ Error was:%2
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
Description
-
Keyword list
-
DataUrl
-
Attribution
-
Url
-
MetadataUrl
-
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Labels (deprecated)
-
Rendering
- Prikazivanje
+
Layer info
-
Data source encoding
-
Create spatial index
- Stvori prostorni indeks
+
Update extents
-
Feature subset
-
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
- pikseli
+
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Map Tip display text
-
Inserts an expression into the action
-
Insert expression...
-
Inserts the selected field into the action
-
HTML
-
displayed as
-
Joins
-
Layer CRS
-
Project CRS
-
Selected CRS
-
No symbology
-
Feature symbology
-
Symbol layer symbology
-
<Default>
-
Select the coordinate reference system for the vector file. The data points will be transformed from the layer coordinate reference system.
-
@@ -50469,22 +50262,22 @@ Error was:%2
Symbology export
-
Datasource Options
-
Custom Options
-
Layer Options
-
Save only selected features
-
This allows one to surpress attribute creation as some OGR drivers (eg. DGN, DXF) don't support it.
-
Skip attribute creation
-
Add saved file to map
-
New Connection...
- Nova poveznica...
+
@@ -50623,7 +50416,7 @@ Error was:%2
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -50649,12 +50442,12 @@ Error was:%2
DescribeFeatureType failed for url %1
-
WFS
-
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
@@ -50702,7 +50495,7 @@ Error was:%2
New Connection...
- Nova poveznica...
+
Network Error
-
Capabilities document is not valid
-
Server Exception
-
capabilities document contained no layers.
-
Display WFS FeatureTypes containing this word in the title, name or abstract
-
Load connections from file
- Učitaj poveznice iz datoteke
+
Use title for layer name
-
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
New Connection...
- Nova poveznica...
+
@@ -50921,7 +50714,7 @@ Error was:%2
Add selected layers to map
-
Failed to parse WMS URI
-
Failed to download capabilities:
-
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
-
+
Coordinate Reference System (%n available)
crs count
-
- Koordinatni referentni sustav (%n dostupan)
- Koordinatni referentni sustav (%n dostupno)
- Koordinatni referentni sustav (%n dostupno)
-
+ Koordinatni referentni sustav (%n dostupan) Koordinatni referentni sustav (%n dostupno) Koordinatni referentni sustav (%n dostupno)
%n Layer(s) selected
selected layer count
-
- %n sloj odabran
- %n sloja odabrana
- %n slojeva odabrano
-
+ %n sloj odabran %n sloja odabrana %n slojeva odabrano
Load connections from file
- Učitaj poveznice iz datoteke
+
Add Layer(s) from a WM(T)S Server
-
Tile size
-
Feature limit for GetFeatureInfo
-
Move selected layer UP
-
Move selected layer DOWN
-
Tileset
-
empty capabilities document
-
WCS
-
Could not get WCS capabilities: %1
-
Version not supported
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -51388,7 +51169,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
-
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51465,27 +51246,27 @@ Response was:
Cannot describe coverage
-
Coverage not found
-
Cannot calculate extent
-
Cannot get test dataset.
-
Received coverage has wrong extent %1 (expected %2)
-
WCS
-
Rotating raster
-
Block read OK
-
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
Getting map via WCS.
-
No data received
-
Cannot create memory file
-
Service Exception
-
Request contains a format not offered by the server.
-
Request is for a Coverage not offered by the service instance.
-
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
The WCS vendor also reported:
-
composed error message '%1'.
-
Cannot verify coverage full extent: %1
-
Name (identifier)
-
Native CRS
-
Native Bounding Box
-
(and %n more)
crs
-
-
+
Available in format
-
Coverages
-
Cache Stats
-
Server Properties
-
GetCapabilitiesUrl
-
Get Coverage Url
-
<font color="red">(advertised but ignored)</font>
-
And %1 more coverages
-
Format not supported
-
Read data error
-
RasterIO error:
-
@@ -51781,12 +51558,12 @@ Response was:
...
- ...
+
Select a file
-
@@ -51794,22 +51571,22 @@ Response was:
Form
- Obrazac
+
Field contains a filename or URL for a webpage
-
Width
- Širina
+
Height
- Visina
+
@@ -51817,33 +51594,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
- %1 od %2 bajta mogućnosti skinuto.
+
Capabilities request redirected.
- Preusmjeren zahtjev za mogućnostima.
+
Redirect loop detected: %1
-
WMS
- WMS
+
empty of capabilities: %1
- nema mogućnosti: %1
+
Download of capabilities failed: %1
- Neuspješno skidanje mogućnosti: %1
+
@@ -51851,7 +51628,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51899,22 +51676,22 @@ Response was:
Cannot parse URI
-
Cannot calculate extent
-
Cannot set CRS
-
Number of layers and styles don't match
-
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
Getting map via WMS.
-
Getting tiles.
-
%n tile requests in background
tile request count
-
- %n zahtjev za tileovima u pozadini
- %n zahtjeva za tileovima u pozadini
- %n zahtjeva za tileovima u pozadini
-
+ %n zahtjev za tileovima u pozadini %n zahtjeva za tileovima u pozadini %n zahtjeva za tileovima u pozadini
, %n cache hits
tile cache hits
-
- , %n posjet međuspremniku
- , %n posjeta međuspremniku
- , %n posjeta međuspremniku
-
+ , %n posjet međuspremniku , %n posjeta međuspremniku , %n posjeta međuspremniku
, %n cache misses.
tile cache missed
-
- , %n promašaj međuspremnika.
- , %n promašaja međuspremnika.
- , %n promašaja međuspremnika.
-
+ , %n promašaj međuspremnika. , %n promašaja međuspremnika. , %n promašaja međuspremnika.
, %n errors.
errors
-
- , %n pogreška.
- , %n pogreške.
- , %n pogrešaka.
-
+ , %n pogreška. , %n pogreške. , %n pogrešaka.
image is NULL
-
unexpected image size
-
Status: %1
Reason phrase: %2
-
Redirect loop detected: %1
-
Service Exception
-
Request contains a format not offered by the server.
-
(and %n more)
crs
-
-
+
LegendURLs
-
Server Properties
-
Selected Layers
-
Other Layers
-
Tile Layer Properties
-
Cache Stats
-
Tile Layer Count
-
GetCapabilitiesUrl
-
GetMapUrl
-
<font color="red">(advertised but ignored)</font>
-
GetLegendGraphic
-
GetTileUrl
-
Tile templates
-
FeatureInfo templates
-
Tileset Properties
-
Identifier
-
Tile mode
-
WMTS
-
WMS-C
-
Invalid tile mode
-
Available Styles
-
Available Tilesets
-
Selected tile matrix set
-
Scale
- Mjerilo
+
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
Width
- Širina
+
Height
- Visina
+
Top
- Vrh
+
Left
- Lijevo
+
Bottom
- Dno
+
Right
- Desno
+
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Cache stats
-
Format not supported
-
Context not fully specified (extent was defined but width and/or height was not).
-
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
GML schema is not valid
-
GML is not valid
-
Cannot identify
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
Map getfeatureinfo error %1: %2
-
Cannot parse getfeatureinfo: %1
-
Map getfeatureinfo error: %1 [%2]
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52619,18 +52368,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
- %n zahtjev za tileovima u pozadini
- %n zahtjeva za tileovima u pozadini
- %n zahtjeva za tileovima u pozadini
-
+
, %n cache hits
tile cache hits
-
- , %n posjet međuspremniku
- , %n posjeta međuspremniku
- , %n posjeta međuspremniku
-
+
, %n cache misses.
tile cache missed
-
- , %n promašaj međuspremnika.
- , %n promašaja međuspremnika.
- , %n promašaja međuspremnika.
-
+
, %n errors.
errors
-
- , %n pogreška.
- , %n pogreške.
- , %n pogrešaka.
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -52713,12 +52446,12 @@ Reason phrase: %2
Select dimensions
-
Dimension
-
Raster layer:
-
Polygon layer containing the zones:
-
Output column prefix:
-
@@ -52767,12 +52500,12 @@ Reason phrase: %2
&Zonal statistics
-
Calculating zonal statistics...
-
Record Metadata
-
@@ -52793,17 +52526,17 @@ Reason phrase: %2
Export feature
-
Select destination layer
-
New temporary layer
-
@@ -52811,7 +52544,7 @@ Reason phrase: %2
Transportation layer
-
Direction field
-
Value for forward direction
-
Value for reverse direction
-
Value two-way direction
-
Speed field
-
Default settings
-
Two-way direction
-
Forward direction
-
Reverse direction
-
Cost
-
Line lengths
-
Always use default
-
@@ -52905,22 +52638,22 @@ Reason phrase: %2
Road graph plugin settings
-
Time unit
-
Distance unit
-
Topology tolerance
-
Shortest path
-
Start
-
Criterion
-
Time
- Vrijeme
+
Point not selected
-
First, select start and stop points.
-
Plugin isn't configured
-
Plugin isn't configured!
-
Tie point failed
-
Start point doesn't tie to the road!
-
Stop point doesn't tie to the road!
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
Path not found
-
@@ -53059,243 +52792,475 @@ Reason phrase: %2
Road graph plugin settings
-
Road graph
-
SLDatabase
Run &Vacuum
-
&Database
-
Sorry
-
No database selected or you are not connected to it.
- Baza podataka nije odabrana ili niste povezani sa njom.
+
SaDbTableModel
+ Schema
- Shema
+ Shema
+ Table
- Tablica
+ Tablica
+ Type
- Tip
+ Tip
+ SRID
- SRID
+ SRID
+ Line Interpretation
+
+
+ Geometry column
- Geometrijska kolona
+ Geometrijska kolona
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Spremi vezu
+ Spremi vezu
+ Should the existing connection %1 be overwritten?
- Treba li spremiti preko postojeće veze %1?
+ Treba li spremiti preko postojeće veze %1?
+ Failed to load interface
+
+
+ Test connection
- Testno povezivanje
+ Testno povezivanje
+ Connection to %1 was successful
- Uspješno spojen na %1
+ Uspješno spojen na %1
+
+
+ Connection failed. Check settings and try again.
+
+SQL Anywhere error code: %1
+Description: %2
+
SaNewConnectionBase
+ Create a new SQL Anywhere connection
+
+
+ Connection Information
- Informacije povezivanja
+ Informacije povezivanja
+ Name
+
+
+ Host
- Domaćin
+ Domaćin
+ Port
- Port
+ Port
+ Server
+
+
+ Database
- Baza podataka
+ Baza podataka
+ Connection Parameters
+
+
+ Username
- Korisničko ime
+ Korisničko ime
+ Password
- Lozinka
+ Lozinka
+ Name of the new connection
- Naziv nove poveznice
+ Naziv nove poveznice
+ Name or IP address of computer hosting the database server (leave blank for local connections)
+
+
+ Port number used by the database server (leave blank for default 2638)
+
+
+ Name of the database server (leave blank for default server on host)
+
+
+ Name of the database (leave blank for default database on server)
+
+
+ Additional connection parameters
+
+
+ Database username
+
+
+ Database password
+
+
+ Save the connection username in the registry
+
+
+ Save Username
- Spremi korisničko ime
+ Spremi korisničko ime
+ &Test Connect
- &Testno povezivanje
+ &Testno povezivanje
+ Save the connection password in the registry (WARNING: NOT SECURE)
+
+
+ Save Password
- Spremi lozinku
+ Spremi lozinku
+
+
+ Encrypt packets using simple encryption
+
+
+ Simple Encryption
+
+
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
+
+
+ Estimate table metadata
+
+
+ Search for geometry columns in tables owned by other users
+
+
+ Search other users' tables
+
SaSourceSelect
+ &Add
- &Dodaj
+ &Dodaj
+ &Set Filter
+
+
+ Wildcard
- Džoker
+ Džoker
+ RegExp
- RegExp
+ RegExp
+ All
- Sve
+ Sve
+ Schema
- Shema
+ Shema
+ Table
- Tablica
+ Tablica
+ Type
- Tip
+ Tip
+ SRID
- SRID
+ SRID
+ Line Interpretation
+
+
+ Geometry column
- Geometrijska kolona
+ Geometrijska kolona
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Sigurno želite ukloniti %1 poveznicu i sve pridružene postavke?
+ Sigurno želite ukloniti %1 poveznicu i sve pridružene postavke?
+ Confirm Delete
+
+
+ Select Table
- Odabir tablice
+ Odabir tablice
+ You must select a table in order to add a layer.
- Morate odabrati tablicu kako biste dodali sloj.
+ Morate odabrati tablicu kako biste dodali sloj.
+ Failed to load interface
+
+
+ Connection failed
- Veza nije uspjela
+ Veza nije uspjela
+ Connection to database %1 failed. Check settings and try again.
+
+SQL Anywhere error code: %2
+Description: %3
+
+
+ No accessible tables found
- Nisu pronađene dostupne tablice
+ Nisu pronađene dostupne tablice
+
+
+ Database connection was successful, but no tables containing geometry columns were %1.
+
+
+ found
+
+
+ found in your schema
+
SaSourceSelectBase
+ Add SQL Anywhere layer
+
+
+ SQL Anywhere Connections
+
+
+ Delete
- Briši
+ Briši
+ Edit
- Uredi
+ Uredi
+ New
- Novo
+ Novo
+ Connect
- Spoji
+ Spoji
+ Search options
- Opcije pretraživanja
+ Opcije pretraživanja
+ Search
- Traži
+ Traži
+ Search mode
- Mod traženja
+ Mod traženja
+ Search in columns
- Traži u kolonama
+ Traži u kolonama
+
+
+
+ SaveAsPythonScriptAction
+
+ I/O error
+
+
+ Unable to save edits. Reason:
+ %s
+
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
-
I/O error
-
Unable to save edits. Reason:
%s
-
@@ -53356,179 +53321,179 @@ Reason phrase: %2
Editor
-
Auto-save script before running
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
- Komentar:
+
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Enable Object Inspector (switching between tabs may be slow)
-
Console
-
APIs
-
Using preloaded APIs file
-
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
@@ -53604,12 +53569,24 @@ Reason phrase: %2
SqlAnywhere
- Invalid Layer
- Nevaljani sloj
+ Add SQL Anywhere Layer...
+
+ Store vector layers within a SQL Anywhere database
+
+
+ Invalid Layer
+ Nevaljani sloj
+
+
+ %1 is an invalid layer and cannot be loaded.
- %1 je nevaljani sloj i ne može se učitati.
+ %1 je nevaljani sloj i ne može se učitati.
@@ -53632,12 +53609,12 @@ Reason phrase: %2
Color
-
Open Library
-
Symbols in group
-
Symbol Name
-
TopologyChecker
-
Topology Checker for vector layer
-
&Topology Checker
-
@@ -53753,14 +53730,13 @@ Reason phrase: %2
Error loading output shapefile:
%s
- Pogreška pri učitavanju izlazne shape datoteke:
-%s
+
Created output shapefile:
%s
%s
-
Feature
@@ -53836,7 +53812,7 @@ Reason phrase: %2
Force point inside polygon
-
@@ -53849,12 +53825,12 @@ Reason phrase: %2
Colors
-
Fill
-
Left
- Lijevo
+
HCenter
-
Right
- Desno
+
Top
- Vrh
+
VCenter
-
Bottom
- Dno
+
Outline style
-
Anchor point
-
Data defined properties...
- Osobine definirane podacima...
+
Anchor point
-
Left
- Lijevo
+
HCenter
-
Right
- Desno
+
Top
- Vrh
+
VCenter
-
Bottom
- Dno
+
Form
- Obrazac
+
Two color
-
Color ramp
-
Gradient type
-
Linear
- Linearno
+
Radial
-
Conical
-
Coord mode
-
Object
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
x
- x
+
y
- y
+
Feature centroid
-
Reference Point 2
-
Angle
- Kut
+
°
- °
+
Data defined properties...
- Osobine definirane podacima...
+
Offset X,Y
- Pomak X, Y
+
@@ -54141,7 +54117,7 @@ Reason phrase: %2
Data defined properties...
- Osobine definirane podacima...
+
Marker placement
-
with interval
-
on every vertex
-
on last vertex only
-
on first vertex only
-
Offset along line
-
Line offset
-
on central point
-
@@ -54222,27 +54198,27 @@ Reason phrase: %2
Vertical distance
-
Vertical displacement
-
Data defined properties...
- Osobine definirane podacima...
+
Horizontal displacement
-
Horizontal distance
-
@@ -54265,17 +54241,17 @@ Reason phrase: %2
Texture width
-
Colors
-
Fill
-
Data defined properties...
- Osobine definirane podacima...
+
SVG Groups
-
SVG Symbols
-
Form
- Obrazac
+
Gradient colors
-
Two color
-
Color ramp
-
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Blur strength
-
Offset X,Y
- Pomak X, Y
+
Data defined properties...
- Osobine definirane podacima...
+
@@ -54381,32 +54357,32 @@ Reason phrase: %2
Fill style
-
Colors
-
Border style
-
Join style
- Spoji stil
+
Data defined properties...
- Osobine definirane podacima...
+
Fill
-
Draw line only inside polygon
-
@@ -54492,7 +54468,7 @@ Reason phrase: %2
Fill
-
Outline style
-
Anchor point
-
Left
- Lijevo
+
HCenter
-
Right
- Desno
+
Top
- Vrh
+
VCenter
-
Bottom
- Dno
+
Data defined properties...
- Osobine definirane podacima...
+
Colors
-
°
- °
+
Colors
-
Fill
-
Anchor point
-
Left
- Lijevo
+
HCenter
-
Right
- Desno
+
Top
- Vrh
+
VCenter
-
Bottom
- Dno
+
Data defined properties...
- Osobine definirane podacima...
+
SVG Groups
-
SVG Images
-
SVG Groups
-
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
-
@@ -54711,7 +54687,7 @@ Reason phrase: %2
Y attribute
-
X attribute
-
Vector field type
-
Height only
-
Polar
-
Cartesian
-
Angle units
-
Angle orientation
-
Counterclockwise from east
-
Clockwise from north
-
Distance unit
-
@@ -54784,17 +54760,17 @@ Reason phrase: %2
XML Request / Response
-
Request
-
Response
-
@@ -54815,59 +54791,59 @@ Reason phrase: %2
Topology Checker
-
Validate All
-
Validate Extent
-
Topology not checked yet
-
Configure
-
Show topology errors
-
Show errors
-
Select automatic fix
-
Fix!
-
No errors were found
-
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55077,7 +55053,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55087,7 +55063,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -56536,7 +56590,7 @@ Click on one of the icons along the top of the composer window to select what ty
Input DXF file
-
Please specify a file to convert.
-
Please specify an output file
-
DXF files
-
Shapefile
-
@@ -56789,7 +56843,7 @@ For support send a mail to scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -57361,7 +57415,7 @@ Base Path (i.e. keep only filename from attribute)
fTools
QGIS version detected:
-
This version of fTools requires at least QGIS version 1.0.0
@@ -57475,7 +57529,7 @@ Dodatak neće biti omogućen.
Eliminate sliver polygons
- Eliminiraj srebrne poligone
+
G&eometry Tools
@@ -57499,7 +57553,7 @@ Dodatak neće biti omogućen.
Voronoi Polygons
-
Extract nodes
@@ -57551,13 +57605,13 @@ Dodatak neće biti omogućen.
Create spatial index
- Stvori prostorni indeks
+
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -57573,1857 +57627,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -59476,10 +59476,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59493,10 +59493,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -59517,10 +59517,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -59533,12 +59533,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -59554,16 +59554,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -59592,15 +59592,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -59617,17 +59617,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -59641,17 +59641,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -59667,16 +59667,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -59690,10 +59690,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -59706,10 +59706,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -59723,12 +59723,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -59742,12 +59742,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -59762,17 +59762,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -59782,10 +59782,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -59800,12 +59800,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -59819,12 +59819,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -59838,10 +59838,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -59858,12 +59858,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -59877,17 +59877,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -59902,10 +59902,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -59916,12 +59916,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -59935,17 +59935,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -59958,12 +59958,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -59980,14 +59980,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -60001,15 +60001,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -60018,15 +60018,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -60057,14 +60057,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -60083,14 +60083,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -60195,12 +60195,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -60214,10 +60214,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -60231,10 +60231,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -60251,10 +60251,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -60270,9 +60270,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -60295,11 +60295,11 @@ Returns a string representation of a color based on its hue, saturation, value a
Point x ordinate
-
Point y ordinate
-
@@ -60312,7 +60312,7 @@ Returns a string representation of a color based on its hue, saturation, value a
(Optional) column to read labels
-
Attribute field to (over)write
-
Calculate average of raster within areas with the same category in a user-defined base map
-
Calculate median of raster within areas with the same category in a user-defined base map
-
Calculate mode of raster within areas with the same category in a user-defined base map
-
Calculate optimal index factor table for LANDSAT-TM raster
-
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Category or object oriented statistics
-
Cats
-
Cats (select from the map or using their id)
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Convert a raster to vector within GRASS
-
Convert a vector to raster within GRASS
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create new GRASS location and transfer data into it
-
Create new GRASS location from metadata file
-
Create new GRASS location from raster data
-
Create new GRASS location from vector data
-
Create new location from .prj (WKT) file
-
Create random cell values with spatial dependence
-
Create random points
-
Create random raster
-
Create random vector point contained in raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create shaded map
-
Create slope raster from DEM (digital elevation model)
-
Create standard vectors
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Develop map
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector attributes
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
E00 vector layer
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export from GRASS
-
Export raster as non-georeferenced PNG image format
-
Export raster from GRASS
-
Export raster series to MPEG movie
-
Export raster to 8/24bit TIFF image at the resolution of the current region
-
Export raster to ASCII text file
-
Export raster to ESRI ARCGRID
-
Export raster to GRIDATB.FOR map file (TOPMODEL)
-
Export raster to Geo TIFF
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to VTK-ASCII
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extract features from vector
-
Extract selected features
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
File management
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Filter image
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Hydrologic modelling
-
Imagery
-
Import ASCII raster
-
Import DXF vector
-
Import ESRI ARC/INFO ASCII GRID
-
Import ESRI E00 vector
-
Import GDAL supported raster
-
Import GDAL supported raster and create a fitted location
-
Import GRIDATB.FOR (TOPMODEL)
-
Import MapGen or MatLab vector
-
Import OGR vector
-
Import OGR vector and create a fitted location
-
Import OGR vectors in a given data source combining them in a GRASS vector
-
Import SPOT VGT NDVI
-
Import SRTM HGT
-
Import US-NGA GEOnet Names Server (GNS) country file
-
Import all OGR/PostGIS vectors in a given data source and create a fitted location
-
Import attribute tables in various formats
-
Import binary MAT-File(v4)
-
Import binary raster
-
Import from database into GRASS
-
Import geonames.org country files
-
Import into GRASS
-
Import loaded raster
-
Import loaded raster and create a fitted location
-
Import loaded vector
-
Import loaded vector and create a fitted location
-
Import only some layers of a DXF vector
-
Import raster from ASCII polygon/line
-
Import raster from coordinates using univariate statistics
-
Import raster into GRASS
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Input table
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage features
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Network analysis
-
Network maintenance
-
Number of rows to be skipped
-
Others
-
Output GML file
-
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Projection conversion of vector
-
Projection management
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reports
-
Reports and statistics
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
-
Split lines to shorter segments
-
Statistics
-
Sum raster cell values
-
Surface management
-
Tables management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Terrain analysis
-
Tests of normality on vector points
-
Text file
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform features
-
Transform image
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
-
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
optionsDialog
Warning!
-
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -62543,32 +62543,32 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Current Rules
-
Add Rule
-
Rule
-
Layer #1
-
Layer #2
-
Layer1ID
-
Layer2ID
-
Delete Rule
-
@@ -62603,7 +62603,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid second geometry.
-
Topology plugin
-
Invalid first geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
@@ -62803,17 +62803,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- Obrazac
+
Open number input dialog
-
...
- ...
+
@@ -62821,12 +62821,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- Obrazac
+
...
- ...
+
-
+
\ No newline at end of file
diff --git a/i18n/qgis_id.ts b/i18n/qgis_id.ts
index 93fbaa1c093..7e6a406b124 100644
--- a/i18n/qgis_id.ts
+++ b/i18n/qgis_id.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Pustaka:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> tabel geometry_columns tidak ditemukan!
Tabel ini esensial bagi beragam aplikasi SIG yang memerlukan hitungan menggunakan tabel .
@@ -417,13 +415,13 @@ Tabel ini esensial bagi beragam aplikasi SIG yang memerlukan hitungan menggunaka
Skrip:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> Versi script yang terinstall tidak sesuai dengan versi script yang dirilis!!
Hal ini mungkin hasil dari upgrade PostGIS yang tidak tepat.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Pengguna ini tidak memiliki hak untuk membaca isi tabel geometry_column!
Tabel ini penting untuk banyak aplikasi GIS untuk enumerasi tabel.
@@ -2099,7 +2097,7 @@ Hai ini mungkin mengakibatkan hasil yang tidak diinginkan.
Panjang field
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Tidak dapat menghapus shapefile
%s
@@ -2409,47 +2407,24 @@ Apakah anda yakin akan melanjutkan?
Menghilangkan dari pilihan saat ini
- Select by location
Pilih berdasarkan lokasi
- Select features in:
Pilih fitur dalam:
- that intersect features in:
Fitur yang berpotongan pada:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Modifikasi pemilihan saat ini berdasarkan:
+ Modifikasi pemilihan saat ini berdasarkan:
Use selected features only
- Gunakan fitur yang dipilih saja
+ Gunakan fitur yang dipilih saja
Please specify select layer
@@ -2652,7 +2627,7 @@ Apakah anda yakin akan melanjutkan?
Get scripts and models
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4723,7 +4698,7 @@ when pressing on the tool dialog's Help button.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Untuk membuka dataset 1 pita dengan tabel warna seperti dataset dengan 3 (RGB) atau 4 (RGBA) pita.
Berguna untuk driver keluaran seperti JPEG, JPEG2000, MrSID, ECW yang tidak mendukung pengindekan warna dataset.
@@ -4966,7 +4941,7 @@ Nilai 'abu-abu' (dari GDAL 1.7.0) memungkikan untuk memperluas dataset
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
- Saat QGIS tidak memungkinkan akses simultan dari benang yang berbeda dengan sumber data yang sama. Pastikan tabel atribut lapisan Anda ditutup. Lanjutkan?
+
Cancel
@@ -5523,7 +5498,7 @@ Kesalahan GEOS geoprocessing: satu atau lebih input fitur mememiliki geometri ya
MainWindow
- &Edit
&Edit
@@ -5543,157 +5518,157 @@ Kesalahan GEOS geoprocessing: satu atau lebih input fitur mememiliki geometri ya
Pilih
- Measure
Ukur
- &Decorations
&Dekorasi
- &Layer
&Layer
- New
Baru
- &Plugins
&Plugins
- &Help
&Bantuan
- &Settings
&Pengaturan
- &Raster
&Raster
- Vect&or
Vekt&or
- &OpenStreetMap
&OpenStreetMap
- File
File
- Manage Layers
Mengatur Layer
- Digitizing
Digitasi
- Advanced Digitizing
Digitasi Lanjutan
- Map Navigation
Navigasi Peta
- Attributes
Attribute
- Plugins
Plugins
- Help
Bantuan
- Raster
Raster
- Label
Label
- Vector
Vektor
- Database
Basisdata
- Web
Web
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Simpan sebagai Gambar...
- &New Print Composer
&Print Composer Baru
- Ctrl+P
Ctrl+P
- Composer Manager...
Pengaturan Composer...
@@ -5713,948 +5688,940 @@ Kesalahan GEOS geoprocessing: satu atau lebih input fitur mememiliki geometri ya
Layer baru dari Template
- Preview Mode
Mode Tampilan
- Paste Features as
Tempel Fitur sebagai
- &New
&Baru
- &Open...
&Buka...
- &Save
&Simpan
- Save &As...
Simp&an sebagai...
- Exit QGIS
Keluar QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
&Undo
- Ctrl+Z
Ctrl+Z
- &Redo
&Redo
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Potong Fitur
- Ctrl+X
Ctrl+X
- Copy Features
Salin Fitur
- Ctrl+C
Ctrl+C
- Paste Features
Paste Fitur
- Ctrl+V
Ctrl+V
- Add Feature
Tambahkan Fitur
- Ctrl+.
Ctrl+.
- Move Feature(s)
Pindahkan Fitur
- Reshape Features
Bentuk ulang fitur
- Split Features
Bagi Fitur
- Split Parts
Bagian-bagian dipisah
- Delete Selected
Hapus yang dipilih
- Add Ring
Tambahkan Lingkaran
- Add Part
Tambahkan Bagian
- Simplify Feature
Penyederhanaan Fitur
- Delete Ring
Hapus Lingkaran
- Delete Part
Hapus bagian
- Merge Selected Features
Gabung fitur yang dipiih
- Merge Attributes of Selected Features
Gabung attribut dari fitur yang dipilih
- Node Tool
Peralatan Node
- Rotate Point Symbols
Putar Simbol Titik
- Snapping Options...
Opsi penguncian...
- Pan Map
Pindahkan/Geser Peta
- Zoom In
Perbesar
- Ctrl++
Ctrl++
- Zoom Out
Perkecil
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Pilih fitur tunggal
+ Pilih fitur tunggal
+ Select Features by Rectangle
- Pilih fitur dengan persegi panjang
+ Pilih fitur dengan persegi panjang
- Select Features by Polygon
Pilih fitur dengan Poligon
- Select Features by Freehand
Pilih fitur dengan gambar bebas
- Select Features by Radius
Pilih fitur dengan Radius
- Deselect Features from All Layers
Hilangkan pemilihan Fitur dari Semua Lapisan
- Identify Features
Identifikasi fitur
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Ukur garis
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Ukur luas
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Ukur sudut
- Zoom Full
Perbesar semua
- Ctrl+Shift+F
Ctrl+ShiftF
- Zoom to Layer
Perbesar ke Layer
- Zoom to Selection
Perbesar pada pemilihan
- Ctrl+J
Ctrl+J
- Zoom Last
Perbesar ke posisi terakhir
- Zoom Next
Perbesar ke posisi selanjutnya
- Zoom Actual Size
Perbesar ke ukuran yang sebenarnya
- Zoom to Native Pixel Resolution
Perbesar ke resolusi aslinya
- Map Tips
Tips peta
- Show information about a feature when the mouse is hovered over it
Tampilkan informasi mengenai fitur ketika penunjuk mouse melayang di atasnya
- New Bookmark...
Penunjuk halaman baru...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Tampilkan penunjuk halaman
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Refresh
- Text Annotation
Annotasi Teks
- Form Annotation
Form anotasi
- Move Annotation
Pindahkan Annotasi
- Labeling
Pelabelan
- Layer Labeling Options
Opsi pelabelan layer
- New Shapefile Layer...
Layer shapefile baru...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Layer SpatiaLite Baru...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Kalkulator raster...
- Add Vector Layer...
Tambahkan Layer Vektor...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Tambahkan Layer Raster...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Tambahkan Layer PostGIS...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Tambahkan Layer SpatiaLite...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Tambahkan Layer MSSQL...
- Add Oracle Spatial Layer...
Tambahkan layer Oracle Spatial...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Tambah layer WMS/WMTS...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Buka atribut tabel
- Toggle Editing
Toggle untuk mengedit
- Toggles the editing state of the current layer
Toggle posisi pengeditan dari layer saat ini
- Save for Selected Layer(s)
Simpan pengeditan untuk layer terpilih
- Save edits to current layer, but continue editing
Simpan hasil edit ke layer ini, tapi lanjutkan mengedit
- Save As...
Simpan sebagai...
- Add from Layer Definition File...
Tambah dari Berkas Lapisan Definisi...
- Save As Layer Definition File...
Simpan Sebagai Berkas Lapisan Definisi...
- Normal
Normal
- Normal preview mode
Mode tampilan normal
- Simulate Photocopy (Grayscale)
Simulasikan fotokopi (Grayscale)
- Simulate photocopy (grayscale)
Simulasikan photocopy (grayscale)
- Simulate Fax (Mono)
Simulasikan Fax (Mono)
- Simulate fax (mono)
Simulasikan fax (mono)
- Simulate Color Blindness (Protanope)
Simulasikan Warna Kebutaan (Protanope)
- Simulate color blindness (protanope)
Simulasikan buta warna (protanope)
- Simulate Color Blindness (Deuteranope)
Simulasikan Warna Kebutaan (Deuteranope)
- Simulate color blindness (deuteranope)
Simulasikan buta warna (Deuteranope)
- Set Scale Visibility of Layer(s)
Atur Skala Visibilitas dari Lapisan
- Remove Layer(s)
Hapus Layer
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Atur CRS layer
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Atur CRS proyek dari layer
- Properties...
Properti...
- Query...
Kueri...
- Add to Overview
Tambahkan ke pratinjau
- Add All to Overview
Tambahkan semua ke pratinjau
- Remove All from Overview
Hapus Semua dari pratinjau
- Show All Layers
Tampilkan semua layer
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Sembunyikan Semua Layer
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Kelola dan install plugin...
- Open Field Calculator
Buka Kalkulator field
- Add Delimited Text Layer...
Tambah layer teks dengan pembatasan (delimited)...
- Add Delimited Text Layer
Tambah layer teks dengan pembatasan (delimited)
- New Vector Layer
Lapisan Vektor Baru
- Paste features in clipboard into a new OGR vector layer.
Tempel fitur di papanklip ke dalam lapisan vektor OGR baru.
- New Memory Vector Layer
Lapisan Vektor Memori Baru
- Paste features in clipboard into a new memory vector layer.
Tempel fitur di papanklip ke dalam lapisan vektor memori.
- Toggle Full Screen Mode
Toggle Modus Layar Penuh
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Properti Proyek...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Opsi...
- Custom CRS...
CRS kustom...
- Configure shortcuts...
Mengkonfigurasi jalan pintas...
- Local Histogram Stretch
Regangkan Histigram Lokal
- Stretch histogram of active raster to view extents
Regangkan histogram dari raster yang aktif untuk menampilkan luasannya
- Help Contents
Konten Bantuan
- F1
F1
- API documentation
Dokumentasi API
- QGIS Home Page
Halaman Web QGIS
- Ctrl+H
Ctrl+H
- Check QGIS Version
Periksa Versi QGIS
- Check if your QGIS version is up to date (requires internet access)
Periksa jika versi QGIS anda terbaru (membutuhkan akses internet)
- About
Tentang
- QGIS Sponsors
Sponsor QGIS
- Move Label
Pindahkan Label
- Rotate Label
Putar Label
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Putar Label
Ctl (Cmd) dengan kenaikan tiap 15 derajat.
- Change Label
Ubah Label
- Style Manager...
Pengaturan style...
- Python Console
Konsol Python
- Full histogram stretch
Peregangan histogram penuh
- Stretch Histogram to Full Dataset
Regangkan histogram ke seluruh dataset
- Customization...
Kustomisasi...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Ini hanya untuk menghindari konflik pada jalan pintas, jalan pintas ini terdapat pada QgsCustomization
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Sematkan layer dan grup...
- Embed layers and groups from other project files
Sematkan layer dan grup dari file proyek lain
- &Copyright Label
&Label dengan hakcipta
- Creates a copyright label that is displayed on the map canvas.
Buat label hak cipta yang ditampilkan pada kanvas peta.
- &North Arrow
&Arah Utara
- "Creates a north arrow that is displayed on the map canvas"
"Buat panah arah utara yang ditampilkan pada kanvas peta"
- &Scale Bar
&Skala batang
- Creates a scale bar that is displayed on the map canvas
Buat skala batang yang ditampilkan pada kanvas peta
- Add WFS Layer...
Tambahkan Layer WFS...
- Add WFS Layer
Tambahkan Layer WFS
- Feature Action
Aksi Fitur
- Run Feature Action
Jalankan aksi fitur
- Pan Map to Selection
Geser peta ke Fitur Terpilih
- Touch zoom and pan
Perbesaran dan pergeseran sentuh
- Offset Curve
Offset Melingkar
- Copy style
Salin style
- Paste style
Tempel style
- Add WCS Layer...
Tambahkan Layer WCS...
- &Grid
&Grid
- Grid
Grid
- Pin/Unpin Labels
Pin/Buka pin label
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6665,44 +6632,44 @@ Geser untuk unpin, Ctl (Cmd) mengaktifkan status
Berlaku untuk semua layer yang dapat diedit
- Highlight Pinned Labels
Sorot label yang di pin
- New Blank Project
Proyek Kosong Baru
- Local Cumulative Cut Stretch
Peregangan Cumulative Cut lokal
- Local cumulative cut stretch using current extent, default limits and estimated values.
Peregangan Cumulative cut berdasarkan cakupan dataset saat ini, batas-batas standar dan nilai terestimasi.
- Full Dataset Cumulative Cut Stretch
Peregangan Cumulative Cut Seluruh Dataset
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Peregangan Cumulative cut berdasarkan cakupan seluruh dataset, batas-batas standar dan nilai terestimasi.
- Show/Hide Labels
Tampilkan/sembunyikan label
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6712,128 +6679,128 @@ Shift+Klik atau tandai fitur pada label untuk menyembunyikannya
Berlaku pada layer aktif yang dapat diedit
- Html Annotation
Anotasi HTML
- Duplicate Layer(s)
Duplikasi Layer
- SVG annotation
Anotasi SVG
- Save for All Layers
Simpan pengeditan untuk semua layer
- Rollback for All Layers
Kembalikan pengeditan semua layer
- Cancel for All Layers
Batalkan pengeditan untuk semua layer
- Rollback for Selected Layer(s)
Kembalikan pengeditan untuk layer terpilih
- Current Edits
Pengeditan saat ini
- Cancel for Selected Layer(s)
Batalkan pengeditan untuk layer terpilih
- Save Layer Edits
Simpan pengeditan layer
- Rotate Feature(s)
Putar Fitur
- &Download data
&Download data
- &Import topology from XML
&Import topologi dari XML
- &Export topology to SpatiaLite
&Ekspor topologi ke Spatialite
- Increase brightness
Tingkatkan kecerahan
- Decrease brightness
Kurangi kecerahan
- Increase contrast
Tingkatkan kontras
- Decrease contrast
Kurangi kontras
- Select By Expression
Pilih berdasarkan Ekspresi
- Select features using an expression
Pilih fitur menggunakan ekspresi
- Need commercial support?
Membutuhkan dukungan komersial?
- DXF Export...
Ekspor DXF...
- Fill Ring
Isi Ring
@@ -7279,18 +7246,13 @@ Berlaku pada layer aktif yang dapat diedit
Can't save model
Tidak dapat menyimpan model
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
@@ -7308,6 +7270,11 @@ See the log for more information.
Could not open model
Tidak dapat membuka model
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
Parameter
@@ -8155,22 +8122,22 @@ See the log for more information.
Mengestimasi derivatif normal...
- minidump written to %1
minidump ditulis ke %1
- writing of minidump to %1 failed (%2)
penulisan minidump ke %1 gagal (%2)
- creation of minidump to %1 failed (%2)
pembuatan minidump ke %1 gagal (%2)
- Crash dumped
Tabrakan dumped
@@ -8323,6 +8290,7 @@ Eror(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
Membuat CRS
@@ -8487,85 +8455,85 @@ Eror(%2): %3
Gagal konversi '%1' ke Interval
- Cannot convert '%1' to boolean
Gagal konversi '%1' ke boolean
- Domain max must be greater than domain min
Domain maks harus lebih besar dari domain min
- Exponent must be greater than 0
Eksponen harus lebih besar dari 0
- Invalid regular expression '%1': %2
Ekspresi reguler tidak valid '%1': %2
- Index is out of range
Indeks berada di uar jangkauan
- Cannot convert '%1:%2:%3' to color
Tidak bisa konversi '%1:%2:%3' ke warna
- Cannot convert '%1:%2:%3:%4' to color
Tidak bisa konversi '%1:%2:%3:%4' ke warna
- "%1" is not a valid color ramp
"%1" bukan warna andai valid
- Cannot convert '%1:%2:%3:%4:%5' to color
Tidak bisa konversi '%1:%2:%3:%4:%5' ke warna
- function help for %1 missing
fungsi bantuan %1 yang hilang
- Operators
Operator
- Fields and Values
Bidang dan Nilai
- Math
Matematika
- Conversions
Konversi
- Conditionals
Kondisional
@@ -8612,58 +8580,58 @@ Eror(%2): %3
tahun|tahun
- Date and Time
Tanggal dan Waktu
- String
String
- Color
Warna
- Geometry
Geometri
- Record
Rekaman
- No root node! Parsing failed?
Tidak ada simpul root! Penguraian gagal?
- (no root)
(tidak ada akses root)
- Unary minus only for numeric values.
Unary minus hanya untuk nilai numerik.
- Can't preform /, *, or % on DateTime and Interval
Tidak dapat melakukan /, *, atau % pada Tanggal Waktu dan Interval
- [unsupported type;%1; value:%2]
[tipe tidak didukung;%1; nilai:%2]
- Column '%1' not found
Kolom '%1' tidak ditemukan
@@ -8751,9 +8719,7 @@ Eror(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- Garis %1 berisikan %n node rangkap pada %2
-
+ Garis %1 berisikan %n node rangkap pada %2
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
Cannot overwrite a OGR layer in place
-
Provider %1 has no %2 method
-
Shapeburst fill
-
Version 0.1
@@ -9875,6 +9842,7 @@ Only %1 of %2 features written.
Layers
Daftar Layer
@@ -10452,12 +10420,14 @@ Only %1 of %2 features written.
Peralatan untuk mengimport shapefile ke PostgreSQL/PostGIS
+ SQL Anywhere plugin
- Plugin SQL Anywhere
+ Plugin SQL Anywhere
+ Store vector layers within a SQL Anywhere database
- Menyimpan layer vektor dengan basisdata SQL Anywhere
+ Menyimpan layer vektor dengan basisdata SQL Anywhere
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS tidak dapat menemukan instalasi GRASS anda.
Apakah anda ingin menentukan jalur (GISBASE) ke instalasi GRASS anda?
@@ -10824,7 +10794,7 @@ Apakah anda ingin menentukan jalur (GISBASE) ke instalasi GRASS anda?
Systematic Organization of Spatial Information [SOSI]
-
Storage and eXchange Format
-
field %1 with unsupported type %2 skipped
-
- Fetching features failed.
SQL:%1
Error: %2
@@ -10907,7 +10877,7 @@ SQL:%1
Eror: %2
- Oracle
Oracle
@@ -10960,7 +10930,7 @@ Eror: %2
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Infinite filter rectangle specified
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
Error loading styles. The query was logged
-
intersecting geometries
-
point not covered by segment
-
dangling end
-
pseudo node
-
gaps
-
point not covered
-
line ends not covered by point
-
point not in polygon
-
polygon does not contain point
-
multipart feature
-
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Save style to DB (%1)
-
Attribute index %1 out of bounds [0;%2]
-
Simplify transform error caught: %1
-
Generated default style
-
Style was missing in capabilities
-
Field contains a color.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- Legenda
+
QSpatiaLiteDriver
- Error opening database
Kesalahan membuka basisdata
- Error closing database
Kesalahan menutup basisdata
- Unable to begin transaction
Tidak dapat memulai transaksi
- Unable to commit transaction
Tidak dapat menerapkan transaksi
- Unable to rollback transaction
Tidak dapat mengembalikan status transaksi
@@ -11563,27 +11538,27 @@ Response was:
Tidak ada kueri
- Unable to execute statement
Tidak dapat mengeksekusi pernyataan
- Unable to execute multiple statements at a time
Tidak dapat mengeksekusi beberapa pernyataan dalam satu waktu
- Unable to reset statement
Tidak dapat mereset pernyataan
- Unable to bind parameters
Tidak dapat mengikat pernyataan
- Parameter count mismatch
Jumlah parameter tidak sesuai
@@ -11760,61 +11735,61 @@ Response was:
QGIS Siap Digunakan!
- Minimize
Memperkecil
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Mengecilkan halaman yang aktif de dalam galangan
- Zoom
Perbesar
- Toggles between a predefined size and the window size set by the user
Beralih antara ukuran standar dan ukuran jendela yang di tentukan oleh pengguna
- Bring All to Front
Bawa semuanya ke depan
- Bring forward all open windows
Teruskan semua jendela yang terbuka
- Current Edits
Pengeditan Saat Ini
- Error
Ada kesalahan
- Failed to open Python console:
Gagal membuka Python:
@@ -11838,138 +11813,138 @@ Silahkan kontak developer.
QGIS - %1 ('%2')
- Panels
Panel-Panel
- Toolbars
Panel alat-alat
- Window
Jendela
- &Database
Basis&data
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
Kotak progres yang memperlihatkan status layer perenderan dan operasi yang sangat membutuhkan waktu lainnya
- Toggle extents and mouse position display
Toggle luasan tampilan dan tampilan posisi mouse
- Coordinate:
Koordinat:
- Current map coordinate
Koordinat peta saat ini
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Menampilkan koordinat peta pada posisi kursor saat ini. Tampilan akan senantiasa diperbarui pada saat mouse digerakkan. Ia juga memungkinkan pengeditan untuk mengatur pusat kanvas pada posisi yang diberikan. Formatnya adalah lintang, bujur atau timur, utara
- Current map coordinate (lat,lon or east,north)
Koordinat peta saat ini (lintang, bujur atau timur, utara)
- Scale
Skala
- Current map scale
Skala peta saat ini
- Displays the current map scale
Memperlihatkan skala peta aktual
- Current map scale (formatted as x:y)
Skala peta saat ini (dengan format x:y)
- Render
Render
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Saat ditandai, layer peta dirender sbg respon terhadap perintah navigasi peta dan event lainnya. Saat tidak ditandai, tidak ada proses render dilakukan. Ini mengijinkan Anda untuk menambahkan layer yang banyak dan mensimbolisasikannya sebelum proses render.
- Toggle map rendering
Toggle untuk menggambarkan peta
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Ikon ini memperlihatkan apakah transformasi sistem koordinat referensi diaktifkan atau tidak. Klik ikon ini untuk mengembalikan dialog properti proyek untuk merubah perilaku ini.
- CRS status - Click to open coordinate reference system dialog
Status CRS - Klik untuk membukan dialog referensi sistem koordinat
- Ready
Siap
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Kanvas previsualisasi peta. Kanvas ini dapat digunakan untuk menampilkan pelokasi peta yang akan memperlihatkan eksten aktual dari kanvas peta. Eksten aktual diperlihatkan sebagai kotak merah. Layer mana saja dapat ditambahkan pada kanvas previsualisasi.
- Overview
Gambaran
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Legenda Peta melampilkan semua layer-layer yang ada pada kanvas. Klik pada pada kotak untuk mengaktifkan atau menonaktifkan layer. Klik dua kali pada layer di legenda untuk menyesuaikan tampilan dan mengatur properti lainnya.
- Layers
Daftar Lapisan
- Map layer list that displays all layers in drawing order.
Petakan daftar layer yang menampilkan semua layer pada urutan penggambaran.
- Layer order
Urutan Layer
@@ -11979,392 +11954,388 @@ Silahkan kontak developer.
qgis.db pribadi
- < Blank >
< Blank >
- QGIS version
Versi QGIS
- QGIS code revision
Kode revisi QGIS
- Compiled against Qt
Kompilasi pada Qt
- Running against Qt
Berjalan pada Qt
- Compiled against GDAL/OGR
Kompilasi pada GDAL/OGR
- Running against GDAL/OGR
Berjalan pada GDAL/OGR
- PostgreSQL Client Version
Versi PostgreSQL Client
- No support.
Tidak ada dukungan.
- SpatiaLite Version
Versi SpatiaLite
- QWT Version
Versi QWT
- PROJ.4 Version
Versi PROJ4
- QScintilla2 Version
Versi QScintilla2
- This copy of QGIS writes debugging output.
Salinan QGIS ini menulis keluaran debugging.
- %1 doesn't have any layers
%1 tidak memiliki layer apapun
- Invalid Data Source
Sumber Data Tidak Benar
- %1 is not a valid or recognized data source
%1 tidak cocok atau sumber data tidak dikenali
- Vector
Vektor
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Tidak dapat mengambil kotak dialog seleksi PostgreSQL dari provider.
- %1 is an invalid layer - not loaded
%1 adalah layer yang tidak valid - tidak dimuat
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 adalah layer yang tidak valid dan tidak dapat dimuat. Silahkan periksa <a href="#messageLog">Catatan pesan</a> untuk informasi lebih lanjut.
- QGIS files
Berkas QGIS
- No legend entries selected
Tidak ada masukan legenda yang dipilih
- Select the layers and groups you want to remove in the legend.
Pilih lapisan dan kelompok-kelompok yang ingin Anda hapus dalam legenda.
- Remove layers and groups
Buang lapisan-lapisan dan grup-grup
- Remove %n legend entries?
number of legend items to remove
-
- Buang %n entri legenda?
-
+ Buang %n entri legenda?
- %n legend entries removed.
number of removed legend entries
-
- %n entri legenda dibuang.
-
+ %n entri legenda dibuang.
- %1 (%2 type unsupported)
%1 (%2 tipe tidak didukung)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/en/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Apakah Anda ingin menyimpan proyek ini? %1
- Invalid Layer
Layer tidak benar
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Tidak dapat mengambil kotak dialog seleksi Spatialite dari provider.
- Delimited Text
Teks Terdelimitasi
- Cannot get Delimited Text select dialog from provider.
Tidak dapat mengambil kotak dialog seleksi Teks Delimitasi dari provider.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Tidak dapat mengambil kotak dialog seleksi MSSQL dari provider.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Tidak dapat mengambil kotak dialog seleksi Oracle dari provider.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Tidak dapat mengambil kotak dialog seleksi WMS dari provider.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Tidak dapat mengambil kotak dialog seleksi WCS dari provider.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Tidak dapat mengambil kotak dialog seleksi WFS dari provider.
- Default failed to open: %1
Default gagal terbuka: %1
- Default not found: %1
Default tidak ditemukan: %1
- Open Template Project
Buka Template Proyek
- Auto-open Project
Buka-otomatis Proyek
- Failed to open: %1
Gagal membuka: %1
- Not valid project file: %1
Bukan berkas proyek yang valid: %1
- Project failed to open: %1
Proyek gagal dibuka: %1
- Default template has been reopened: %1
Template default telah dibuka kembali: %1
- File not found: %1
Berkas tidak ditemukan: %1
- Calculating...
Menghitung...
- Abort...
Batalkan...
- Choose a QGIS project file to open
Pilih arsip proyek QGIS untuk dibuka
- Loading project: %1
Memuat proyek: %1
- Unable to open project
Tidak dapat membuka proyek
- Security warning
Peringatan keamanan
- project macros have been disabled.
macro proyek telah dinonaktifkan.
- Enable macros
Aktifkan macro
- Project loaded
Proyek dimuat
- Choose a QGIS project file
Memilih arsip proyek QGIS
- Saved project to: %1
Simpan proyek ke: %1
- Unable to save project %1
Tidak bisa untuk menyimpan proyek %1
- Choose a file name to save the QGIS project file as
Pilih satu nama arsip untuk menyimpan sebagai arsip proyek QGIS
- Unable to load %1
Tidak dapat memuat %1
- Choose a file name to save the map image as
Pilih satu nama arsip untuk menyimpan sebagai gambar peta
- Saved map image to %1
Gambar peta tersimpan di %1
- Default system font substituted.
Huruf default sistem digantikan.
- Labeling
Pelabelan
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
Font untuk layer <b><u>%1</u></b> tidak ditemukan (<i>%2</i>). %3
- Open labeling dialog
Buka kotak dialog pelabelan
@@ -12465,449 +12436,445 @@ Silahkan kontak developer.
Tanggal/Waktu
- Compiled against GEOS
Dikompilasi terhadap GEOS
- Running against GEOS
Jalankan terhadap GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
Izin tidak cukup
- The project file is not writable.
Berkas proyek tidak bisa ditulis.
- DXF export completed
Ekspor DXF lengkap
- DXF export failed
Ekspor DXF gagal
- Commit errors
Mengirim kesalahan
- Could not commit changes to layer %1
Tidak dapat menerapkan perubahan ke layer %1
- Errors: %1
Kesalahan: %1
- Show more
Lebih lanjut
- Labeling Options
Opsi pelabelan
- Please select a vector layer first
Silahkan pilih layer vektor terlebih dahulu
- Layer labeling settings
Pengaturan pelabelan layer
- Reading raster
Membaca raster
- Cannot write raster error code: %1
Tidak dapat menulis kode kesalahan raster: %1
- Saving done
Selesai menyimpan
- Export to vector file has been completed
Mengeksport arsip vektor telah selesai
- Save error
Kesalahan menyimpan
- Export to vector file failed.
Error: %1
Mengekspor to arsip vektor gagal.
Kesalahan: %1
- No Layer Selected
Tidak ada Layer Dipilih
- To delete features, you must select a vector layer in the legend
Untuk menghapus fitur, Anda harus memilih layer vektor pada legenda
- No Vector Layer Selected
Tidak ada Layer Vektor yang Dipilih
- Deleting features only works on vector layers
Penghapusan fitur-fitur hanya berfungsi pada layer vektor
- Provider does not support deletion
Penyedia tidak mendukung penghapusan
- Data provider does not support deleting features
Penyedia data tidak mendukung penghapusan fitur-fitur
- Layer not editable
Layer tidak dapat diedit
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Layer ini tidak dapat diedit. Pilih 'Memulai mengedit' pada panel mendigitasi.
- No Features Selected
Tidak Ada Fitur Dipilih
- The current layer has not selected features
Lapisan saat ini belum memilih fitur
- Delete features
Hapus fitur
- Delete %n feature(s)?
number of features to delete
-
- Hapus %n fitur?
-
+ Hapus %n fitur?
- Features deleted
Fitur dihapus
- Problem deleting features
Masalah saat menghapus beberapa fitur
- A problem occured during deletion of features
Sebuah masalah muncul saat menghapus beberapa fitur
- %n feature(s) deleted.
number of features deleted
-
- %n fitur dihapus.
-
+ %n fitur dihapus.
- Merging features...
Menggabungkan fitur...
- Abort
Batalkan
- Create unique print composer title
Buat judul komposer cetak yang unik
- (title generated if left empty)
(judul dibuat secara otomatis apabila dikosongkan)
- Composer title
Judul Komposer
- Title can not be empty!
Judul tidak boleh kosong!
- Title already exists!
Judul sudah ada!
- Composer %1
Komposer %1
- copy
salin
- No active layer
Tidak ada layer yang aktif
- No active layer found. Please select a layer in the layer list
Tidak ada layer yang aktif yang ditemukan. Silahkan untuk memilih layer pada daftar layer
- Active layer is not vector
Layer yang aktif bukan vector
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Alat untuk menggabung fitur hanya berfungsi pada layer vektor. Silahkan untuk memilih layer vektor dari daftar layer
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Penggabungan fitur hanya dapat dilakukan pada layer dalam modus edit. Untuk menggunakan alat penggabung, silahkan ke Layer->Toggle Edit
- Not enough features selected
Fitur yang dipilih tidak cukup
- The merge tool requires at least two selected features
Alat penggabung membutuhkan paling tidak 2 fitur yang dipilih
- Merged feature attributes
Menggabung attribut fitir
- Merge failed
Penggabungan gagal
- An error occured during the merge operation
Kesalahan muncul selama proses penggabungan
- Union operation canceled
Operasi union dibatalkan
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
Proses union mungkin akan menghasilkan tipe geometri yang tidak kompatibel dengan layer saat ini dan oleh karena itu dibatalkan
- Merged features
Fitur tergabungkan
- No active vector layer
Tidak ada layer vektor yang aktif
- To select features, choose a vector layer in the legend
Untuk memilih fitur, pilih satu layer vektor pada legenda
- Features cut
Fitur terpotong
- Features pasted
Fitur ditempel
- Paste features
Tempel fitur
- no features could be successfully pasted.
tidak ada fitur berhasil disisipkan.
- %1 features were successfully pasted.
%1 fitur telah berhasil disisipkan.
- %1 of %2 features could be successfully pasted.
%1 dari %2 fitur berhasil disisipkan.
- Pasted
Disisipkan
- New memory layer name
Nama lapisan memori baru
- Layer name
Nama lapisan
- No features in clipboard.
Tidak ada fitur di papan klip.
- No features with geometry found, point type layer will be created.
Tidak ada fitur dengan geometri ditemukan, jenis lapisan titik akan dibuat.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Beberapa jenis geometri ditemukan, fitur dengan geometri yang berbeda dari %1 akan dibuat tanpa geometri.
- Cannot create new layer
Tidak bisa membuat lapisan baru
- Cannot create field %1 (%2,%3)
Tidak bisa membuat kolom %1 (%2,%3)
- Cannot copy style: %1
Tidak dapat menyalin style: %1
- Cannot parse style: %1:%2:%3
Tidak dapat menguraikan style: %1:%2:%3
- Cannot read style: %1
Tidak dapat membaca style: %1
- Start editing failed
Memulai mengedit gagal
- Provider cannot be opened for editing
Penyedia tidak dapat dibuka untuk diedit
- Stop editing
Berhenti mengedit
- Do you want to save the changes to layer %1?
Apakah anda ingin menyimpan perubahan pada layer %1?
- Problems during roll back
Masalah ketika mengembalikan
- Could not %1 changes to layer %2
Errors: %3
@@ -12917,342 +12884,340 @@ Errors: %3
Kesalahan: %3
- rollback
kembalikan
- cancel
batal
- Save
Simpan
- all
semua
- Rollback
Kembalikan
- Cancel
Batal
- Current edits
Pengeditan saat ini
- %1 current changes for %2 layer(s)?
%1 perubahan ini untuk %2 layer)?
- copy
salin
- Plugin layer
Layer Plugin
- Memory layer
Memori layer
- Duplicate layer:
Duplikasi layer:
- %1 (duplication resulted in invalid layer)
%1 (duplikasi menghasilkan layer yang tidak valid)
- Set scale visibility for selected layers
Atur visibilitas skala untuk lapisan yang dipilih
- Couldn't load Python support library: %1
Tidak dapat memuat pustaka dukungan Python:%1
- Couldn't resolve python support library's instance() symbol.
Tidak dapat menyelesaikan simbol instans() pustaka dukungan.
- Python support ENABLED :-)
Dukungan Python DIAKTIFKAN :-)
- There is a new version of QGIS available
Versi baru dari QGIS telah tersedia
- You are running a development version of QGIS
Anda sedang menjalankan versi pengembangan QGIS
- You are running the current version of QGIS
Anda sedang menjalankan versi aktual QGIS
- Would you like more information?
Apakah anda memerlukan informasi tambahan?
- QGIS Version Information
Informasi Versi QGIS
- QGIS - Changes since last release
QGIS - Perubahan sejak rilis terakhir
- Unable to get current version information from server
Gagal memperoleh informasi versi aktual dari server
- Connection refused - server may be down
Permintaan koneksi ditolak - Mungkin saat ini server sedang mati
- QGIS server was not found
Server QGIS tidak ditemukan
- Unknown network socket error: %1
Kesalahan soket jaringan yang tidak diketahui: %1
- Unable to communicate with QGIS Version server
%1
Tidak dapat berkomunikasi dengan server versi QGIS
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
Untuk merentangkan histogram penuh, anda harus memilih layer raster.
- To change brightness or contrast, you need to have a raster layer selected.
Untuk merubah kecerahan atau kontras, anda harus lebih dulu menyeleksi layer raster.
- en
documentation language
en
- Layer is not valid
Layer tidak benar
- The layer %1 is not a valid layer and can not be added to the map
Layer %1 merupakan layer yang tidak cocok dan tidak dapat di tambahkan dalam peta
- The layer is not a valid layer and can not be added to the map
Layer ini bukan layer yang benar dan tidak dapat ditambahkan pada peta
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Proyek memiliki layer pada modus edit yang belum disimpan, yang TIDAK akan disimpan!
- Save?
Simpan?
- Current CRS: %1 (OTFR enabled)
CRS saat ini: %1 (OTFR diaktifkan)
- Current CRS: %1 (OTFR disabled)
CRS saat ini: %1 (OTFR dinonaktifkan)
- Map coordinates for the current view extents
Koordinat peta pada luasan tampilan saat ini
- Map coordinates at mouse cursor position
Koordinat peta pada lokasi penunjuk mouse
- Extents:
Luasan:
- Maptips require an active layer
SaranPeta: membutuhkan layer yang aktif
- %n feature(s) selected on layer %1.
number of selected features
-
- %n fiitur yang dipilih pada layer %1.
-
+ %n fiitur yang dipilih pada layer %1.
- Open a GDAL Supported Raster Data Source
Membuka sumber data raster yang didukung oleh GDAL
- Error adding valid layer to map canvas
Gagal menambakan layer yang valid pada kanvas peta
- Raster layer
Layer Raster
- %1 is not a supported raster data source
%1 sumber data raster tidak didukung
- Unsupported Data Source
Sumber data tidak didukung
- Exit QGIS
Keluar QGIS
- Do you really want to quit QGIS?
Apakah Anda yakin ingin keluar dari QGIS?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Berkas proyek ini disimpan oleh QGIS versi lama. Ketika menyimpan berkas proyek ini, QGIS akan diperbarui ke versi terbaru, mungkin rendering berguna untuk versi QGIS.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p> Arsip proyek ini disimpan oleh QGIS versi yang lebih lama. Ketika menyimpan arsip proyek ini, QGIS akan memperbaruinya ke versi terakhir, kemungkinan penggambaran objek (rendering) tidak akan berfungsi pada QGIS versi yang lebih lama. <p> Meskipun demikian pengembang QGIS mencoba untuk memelihara kompatibilitas dengan versi sebelumnya, beberapa informasi dari arsip proyek lama mungkin akan hilang. Untuk meningkatkan kualitas QGIS, kami akan sangat mengapresiasi jika anda mengarsipkan laporan kesalahan pada %3. Pastikan untuk mengikutsertakan arsip proyek lama, dan menyatakan versi dari QGIS yang anda gunakan untuk menemukan kesalahan tersebut. <p> Untuk menghilangkan peringatan ini ketika membuka arsip proyek yang lebih lama, silahkan untuk tidak mencentang kotak '%5' dalam menu %4. <p>Versi arsip proyek:%1 <p>Versi QGIS saat ini:%2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Pengaturan:Pilihan:Umum</tt>
- Warn me when opening a project file saved with an older version of QGIS
Beritahu saya ketika membuka sebuak arsip proyek yang disimpan dalam versi yang lebih tua dari QGIS
- Project file is older
Arsip proyek anda lebih tua
- This project file was saved by an older version of QGIS
Berkas proyek ini disimpan pada versi QGIS yang lebih lama
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
Sebuah permintaan jaringan kehabisan waktu, setiap data yang diterima mungkin tidak lengkap.
- Warning
Perhatian
- This layer doesn't have a properties dialog.
Layer ini tidak memiliki dialog properti.
- Authentication required
Membutuhkan pembuktian keabsahan
- Proxy authentication required
Membutuhkan pembuktian keabsahan proxy
- SSL errors occured accessing URL %1:
Kesalahan SSl muncul ketika mengakses URL %1:
-
Always ignore these errors?
@@ -13261,12 +13226,10 @@ Always ignore these errors?
Selalu abaikan kesalahan ini?
- %n SSL errors occured
number of errors
-
- %n Terjadi kesalahan SSL
-
+ %n Terjadi kesalahan SSL
@@ -13298,7 +13261,7 @@ Selalu abaikan kesalahan ini?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13648,19 +13611,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
Pengecualian
- unknown exception
Pengecualian tidak diketahui
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13685,7 +13648,7 @@ User DB Path: %9
-
match indentation of application state
@@ -13693,24 +13656,24 @@ User DB Path: %9
- [ERROR] Can not make qgis.db private copy
[GAGAL] Tidak dapat membuat salinan privat dari qgis.db
- Could not open qgis.db
Tidak dapat membuka qgis.dg
- Migration of private qgis.db failed.
%1
Pemindahan qgis.db privat gagal
%1
- Update of view in private qgis.db failed.
%1
Pembaruan tampilan pada qgis.db privat gagal.
@@ -13720,28 +13683,28 @@ User DB Path: %9
QgsAtlasComposition
- Atlas filter eval error: %1
Menyaring atlas eval eror: %1
- Composer
Penyusun
- No matching atlas features
Tidak ada pencocokan fitur atlas
- Atlas feature %1 of %2
Fitur Atlas %1 dari %2
- Atlas filename evaluation error: %1
Atlas filename evaluasi eror: %1
@@ -13757,7 +13720,7 @@ User DB Path: %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Tidak dapat mengatur pola nama berkas sebagai '%1'.
@@ -14116,7 +14079,7 @@ Parser error:
Feature Attributes
-
@@ -14452,9 +14415,7 @@ Parser error:
Attribute table - %1 (%n Feature(s))
feature count
-
- Atribut tabel - %1 (%n fitur)
-
+ Atribut tabel - %1 (%n fitur)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Apakah Anda yakin ingin menghapus %n bookmark?
-
+ Apakah Anda yakin ingin menghapus %n bookmark?
QgsCategorizedSymbolRendererV2Model
- Symbol
Simbol
- Value
Nilai
- Label
Label
@@ -15236,49 +15195,49 @@ Basisdata:%2
Lanjutan
- Random colors
Warna acak
- Symbol levels...
Level Simbol...
- High number of classes!
Jumlah kelas terlalu banyak!
- Classification would yield %1 entries which might not be expected. Continue?
Klasifikasi akan menghasilkan %1 entri yang mungkin tidak diharapkan. Lanjutkan?
- Error
Kesalahan
- There are no available color ramps. You can add them in Style Manager.
Tidak ada degradasi warna. Anda dapat menambahkannya ke dalam Pengaturan Style.
- The selected color ramp is not available.
Degradasi warna yang dipilih tidak tersedia.
- Confirm Delete
Konfirmasi untuk menghapus
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Klasifikasi field telah berubah dari '%1' ke '%2'.
Apakah kelas yang sudah ada sebelumnya akan dihapus sebelum pengklasifikasian?
@@ -15336,25 +15295,20 @@ Apakah kelas yang sudah ada sebelumnya akan dihapus sebelum pengklasifikasian?
QgsColorButton
- Select Color
Pilih Warna
- Copy color
Salin warna
- Paste color
Tempel warna
-
- Pick color
-
QgsColorDialog
@@ -15426,7 +15380,7 @@ Apakah kelas yang sudah ada sebelumnya akan dihapus sebelum pengklasifikasian?
Composer
Komposer
@@ -15585,8 +15539,8 @@ Apakah kelas yang sudah ada sebelumnya akan dihapus sebelum pengklasifikasian?
Set as atlas feature for %1
Atur fitur atlas untuk %1
@@ -15623,7 +15577,7 @@ Apakah kelas yang sudah ada sebelumnya akan dihapus sebelum pengklasifikasian?
Choose a file name to save the map as
Pilih satu nama arsip untuk menyimpan peta sebagai
@@ -15634,15 +15588,15 @@ Apakah kelas yang sudah ada sebelumnya akan dihapus sebelum pengklasifikasian?
Empty filename pattern
Pola nama file kosong
The filename pattern is empty. A default one will be used.
Pola nama file kosong. Nama file standar akan digunakan.
@@ -15653,15 +15607,15 @@ Apakah kelas yang sudah ada sebelumnya akan dihapus sebelum pengklasifikasian?
Unable to write into the directory
Tidak dapat menulis ke direktori
The given output directory is not writable. Cancelling.
Direktori keluaran yang diberikan tidak dapat ditulis. Membatalkan.
@@ -15671,251 +15625,251 @@ Apakah kelas yang sudah ada sebelumnya akan dihapus sebelum pengklasifikasian?
Atlas processing error
Pemrosesan atlas gagal
Feature filter parser error: %1
Saring fitur parser error: %1
Error creating %1.
Eror membuat %1.
Rendering maps...
Merender peta...
Abort
Batalkan
- Big image
Gambar besar
- To create image %1x%2 requires about %3 MB of memory. Proceed?
Untuk membuat gambar %1x%2 membutuhkan memori sekitar %3 MB. Lanjutkan?
- Choose a file name to save the map image as
Pilih nama arsip untuk menyimpan gambar peta sebagai
- Memory Allocation Error
Kesalahan Alokasi Memori
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
Membuat gambar #%1( %2x%3 @ %4dpi ) dapat mengakibatkan memory overflow.
Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
- Image export error
Ekspor gambar eror
- Directory where to save image files
Direktori untuk menyimpan berkas gambar
- Image format:
Format gambar:
- SVG warning
Peringatan SVG
- Don't show this message again
Tidak perlu perlihatkan pesan ini lagi
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>Fungsi Ekspor SVG pada QGIS mengalami beberapa masalah karena adanya bug dan kekurangan pada
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Kode svg Qt4. Dalam kondisi tertentu, terdapat masalah dengan layer yang tidak di potong (di klip) terhadap kotak batas luasan peta.<p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Jika anda membutuhkan outpt arsip berdasarkan vektor Qgis menyarankan agar anda mencoba mencetaknya ke PostScript jika output SVG kurang memuaskan.<p>
- SVG Format
Format SVG
- Directory where to save SVG files
Direktori untuk menyimpan berkas SVG
- SVG export error
Ekspor SVG eror
- on page
pada halaman
- SVG error
Eror SVG
- There was an error in SVG output for SVG layer
Ada eror di keluaran SVG dari lapisan SVG
- copy
salin
- Duplicating composer...
Menduplikasi komposer...
- Duplicate Composer
Duplikasi Komposer
- Composer duplication failed.
Duplikasi komposer gagal.
- Save template
Simpan template
- Composer templates
Template komposer
- Save error
Simpan kesalahan
- Error, could not save file
Kesalahan, tidak bisa menyimpan arsip
- Load template
Muat template
- Read error
Kesalahan membaca
- Error, could not read file
Kesalahan, tidak dapat membaca arsip
- Composer error
Kesalahan komposer
- Error, could not create new composer
Gagal, tidak dapat membuat komposer baru
- Loading template into composer...
Memuat template dalam komposer...
- Project contains WMS layers
Proyek berisikan layer WMS
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Beberapa server WMS (seperti UMN mapserver) memiliki batas parameter LEBAR dan TINGGI. Mencetak layer dari server seperti itu mungkin melebihi batas. Jika seperti itu, layer WMS tidak akan di cetak
- Project contains composition effects
Proyek mengandung efek komposisi
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Efek komposisi lanjut, seperti modus pencampuran dan transparansi layer, diaktifkan pada proyek ini, yang mana tidk dapat dicetak sebagai sebuah vektor. Disarankan untuk mencetak sebagai raster.
- Print as raster
Cetak sebagai raster
- Landscape
Bentang
@@ -17060,67 +17014,67 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
QgsComposerItemWidget
- Frame color changed
Warna figura telah dirubah
- Background color changed
Warna latar telah dirubah
- Item position changed
Posisi item dirubah
- Item outline width
Lebar garis tepi item
- Item frame join style
Item bingkai gabung gaya
- Item frame toggled
Frame item berubah
- Item background toggled
Latar item berubah
- Select background color
Pilih warna latar
- Select frame color
Pilih warna frame
- Item blend mode changed
Mode paduan item yang diubah
- Item transparency changed
Item transparan yang diubah
- Item id changed
id item berubah
- Item rotation changed
Rotasi item yang diubah
@@ -17133,115 +17087,104 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecilOpsi global
- Position and size
Posisi dan ukuran
- Reference point
Titik referensi
- X
X
- Y
Y
- Width
Lebar
- Height
Tinggi
- Page
Laman
- ...
- ...
-
-
- Rotation
Rotasi
- °
°
- Frame
Frame
- mm
mm
- Join style
Gabung gaya
- Rendering
Merender
- Blending mode
Modus blending
- Thickness
Ketebalan
- Color...
Warna...
- Background
Latar belakang
- Transparency
Transparansi
- Item ID
ID Item
- Id
Id
@@ -17274,18 +17217,18 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecilLabel warna telah diubah
- Insert expression
Masukkan ekspresi
- Label alignment changed
Kesejajaran label tekah dirubah
@@ -17391,8 +17334,9 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
QgsComposerLegend
+ Legend
- Legenda
+ Legenda
@@ -17557,12 +17501,12 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecilKelompok legenda telah ditambahkan
- Map %1
Peta %1
- None
Tidak ada
@@ -17992,107 +17936,100 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
QgsComposerMap
- Map %1
Peta %1
- Map will be printed here
Peta akan dicetak di sini
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Render
- Rectangle
Persegi panjang
- Solid
Solid
- Cross
Silang
- Markers
-
-
- Decimal
Desimal
- DegreeMinute
DerajatMenit
- DegreeMinuteSecond
DerajatMenitDetik
+ No frame
- Tidak ada bingkai
+ Tidak ada bingkai
- Zebra
Zebra
- Map scale changed
Skala peta berubah
- Map rotation changed
Rotasi peta berubah
- Map extent changed
Extent peta berubah
- Select font color
Pilih warna huruf
@@ -18108,235 +18045,164 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecilPilih warna bingkai grid
- Canvas items toggled
Items kanvas toggled
- None
Tidak ada
- Overview frame style changed
Pratinjau gaya frame yang diubah
- Overview centering mode changed
Pratinjau mode tengah yang diubah
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
- Milimeter
-
-
- Centimeter
-
-
- change...
- ubah...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Kotak centang grid toggled
- Grid interval changed
Interval grid berubah
- Grid offset changed
Ofset grid berubah
- Grid line style changed
Gaya garis grid yang diubah
- Grid type changed
Jenis grid berubah
+ Grid cross width changed
- Lebar persilangan grid berubah
+ Lebar persilangan grid berubah
- Annotation font changed
Huruf anotasi berubah
+ Label font changed
- Huruf label telah diubah
+ Huruf label telah diubah
- Annotation distance changed
Jarak annotasi berubah
- Annotation format changed
Format anotasi yang diubah
- Annotation toggled
Anotasi toggled
- Changed annotation precision
Perubahan persisi anotasi
- Changed grid frame style
Berubah gaya bingkai grid
+ Changed grid frame width
- Berubah lebar bingkai grid
+ Berubah lebar bingkai grid
- Changed grid frame line thickness
Garis thikness bingkai grid berubah
- Grid frame color changed
Warna bingkai grid berubah
- Grid frame first fill color changed
Warna pertama bingkai grid berubah
- Grid frame second fill color changed
Warna kedua bingkai grid berubah
- Inside frame
Dalam figura
- Outside frame
Diluar figura
- Disabled
Dinonaktifkan
- Horizontal
Horizontal
- Vertical
Vertikal
- Annotation position changed
Posisi anotasi berubah
- Changed annotation direction
Perubahan arah anotasi
- Map %1
Peta %1
@@ -18349,377 +18215,287 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecilOpsi Peta
- Map
Peta
- Main properties
Properti Utama
- Update preview
Perbarui pratinjau
- Scale
Skala
- Map rotation
Rotasi peta
- Draw map canvas items
Gambar item kanvas
- Lock layers for map item
Kunci layer untuk item peta
- Extents
Luasan
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
Tentukan extent kanvas peta
- X min
X min
- View extent in map canvas
Lihat luasan dalam kanvas peta
- Controlled by atlas
Dikontrol oleh atlas
- Margin around feature
Batas sekeliling fitur
- %
%
- Fixed scale
Skala tetap
- Use one of the predefined scales of the project where the atlas feature best fits.
Gunakan salah satu skala yang telah ditentukan proyek dimana fitur atlas paling sesuai.
- Predefined scale (best fit)
Skala yang telah ditentukan (paling baik)
+ Show grid
- Tampilkan grid
+ Tampilkan grid
+ Grid &type
- &Jenis grid
+ &Jenis grid
- Offset
Ofset
- mm
mm
- Blend mode
Modus pencampuran
- Interval
Interval
- Grid frame
Bingkai kotak
- Frame size
Ukuran bingkai
- Frame line thickness
Garis thickness bingkai
- Color...
Warna...
- Frame fill colors
Isian warna bingkai
- Marker style
- Style penanda
-
-
- Overview blending mode
Pratinjau Modus pencampuran
- Invert overview
Balik pratinjau
- Center on overview
Pusat pada pratinjau
- X
X
- °
°
- Y
Y
- Cross width
Lebar silang
- Frame style
Style frame
- Line style
Style garis
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Jenis grid
-
-
- CRS
- CRS
-
-
- change...
ubah...
- Interval units
-
-
- Map unit
-
-
- Millimeter
- Milimeter
-
-
- Centimeter
-
-
- No frame
- Tidak ada bingkai
-
-
- Zebra
- Zebra
-
-
- Draw coordinates
Gambar koordinat
- Format
Format
- Left
Kiri
- Right
Kanan
- Top
Atas
- Bottom
Bawah
- Font
Huruf
- Font...
Huruf...
- Font color
- Warna huruf
-
-
- Distance to map frame
Jarak ke figura peta
- Coordinate precision
Presisi koordinat
- Font color...
Warna huruf...
- Overview
Pratinjau
- Overview frame
Frame pratinjau
- Overview style
Style Pratinjau
- Change...
Ubah...
@@ -18760,18 +18536,18 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
QgsComposerPicture
- Picture expression parsing error: %1
Ekspresi gambar parsing eror: %1
- Composer
Penyusun
- Picture expression eval error: %1
Ekspresi gambar eror eval: %1
@@ -18786,64 +18562,64 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
Picture changed
Gambar telah diganti
- Expression based image path
Ekspresi berbasis path gambar
- Picture rotation changed
Rotasi gambar telah dirubah
- Select new preview directory
Pilih direktori pratinjau baru
- Picture resize mode changed
Mode ukur ulang berubah
- Picture placement changed
Penempatan gambar berubah
- Picture source changed
Sumber gambar berubah
- Picture source expression
Sumber gambar ekspresi
- Rotation synchronisation toggled
Toggle sinkronisasi rotasi
- Rotation map changed
Rotasi peta telah dirubah
- Map %1
Peta %1
- Creating icon for file %1
Membuat ikon untuk arsip %1
@@ -19010,32 +18786,32 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
QgsComposerScaleBar
- units
satuan
- km
km
- m
m
- miles
mil
- ft
kaki
- Nm
Nm
@@ -19044,38 +18820,38 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecilQgsComposerScaleBarWidget
Single Box
Kotak tunggal
Double Box
Kotak ganda
Line Ticks Middle
Tanda Centang Garis Tengah
Line Ticks Down
Tanda Centang Garis Bawah
Line Ticks Up
Tanda Centang Garis Atas
Numeric
Numerik
@@ -19115,144 +18891,119 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecilMil Laut
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Pilih warna huruf
-
-
- Select stroke color
-
-
- Map %1
Peta %1
- Scalebar map changed
Skala bar peta berubah
- Scalebar line width
Lebar garis skala bar
- Scalebar segment size
Ukuran segment skala bar
- Scalebar segments left
Segmen kiri skala bar
- Number of scalebar segments changed
Angka dari segmen skalabar berubah
- Scalebar height changed
Tinggi skala bar berubah
- Scalebar font changed
Huruf skala bar berubah
- Scalebar font color changed
Warna huruf skalabar berubah
- Scalebar color changed
Warna skala bar berubah
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Warna stroke skalabar berubah
- Scalebar unit text
Satuan teks skala bar
- Scalebar map units per segment
Satuan peta skala bar per segmen
- Scalebar style changed
Style skala bar berubah
- Scalebar label bar space
Spasi label skalabar
- Scalebar box content space
Jarak isi kotak skala bar
- Scalebar alignment
Skalabar sejajar
- Scalebar changed to map units
Skalabar berubah ke satuan peta
- Scalebar changed to feet
Skala bar berubah ke kaki
- Scalebar changed to nautical miles
Skalabar berubah ke mil laut
- Scalebar changed to meters
Skalabar berubah ke meter
- Scalebar line join style
Gabung gaya garis skalabar
- Scalebar line cap style
Garis skalabar gaya cap
@@ -19395,11 +19146,6 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
Secondary fill color...
-
-
- Stroke color...
Warna garis...
@@ -19409,37 +19155,37 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
Ellipse
Elips
Rectangle
Persegi panjang
Triangle
Segi tiga
- Shape style changed
Gaya bentuk berubah
- Shape radius changed
Radius bentuk berubah
- Shape type changed
Jenis Shape dirubah
@@ -19850,107 +19596,107 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
QgsComposition
- Label added
Label telah ditambahkan
- Map added
Peta telah ditambahkan
- Arrow added
Tanda panah telah ditambahkan
- Scale bar added
Skala balok telah ditambahkan
- Shape added
Shape telah ditambahkan
- Picture added
Gambar telah ditambahkan
- Legend added
Legenda telah ditambahkan
- Table added
Tabel telah ditambahkan
- Aligned items left
Sejajar kirikan item
- Aligned items horizontal center
Titik tengah horizontal item yang tersusuh
- Aligned items vertical center
Titik tengah vertikal item yang tersusuh
- Aligned items right
Sejajar kanankan item
- Aligned items top
Sejajar ataskan item
- Aligned items bottom
Sejajarkan bawahkan item
- Items locked
Item terkunci
- Items unlocked
Item kunci dibuka
- Item z-order changed
Urutan -z item telah dirubah
- Remove item group
Hilangkan kelompok item
- Frame deleted
Bingkai dihapus
- Item deleted
Item telah dihapus
- Multiframe removed
Multi-bingkai dihapus
@@ -20007,148 +19753,148 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecil
Landscape
Bentang
Portrait
Tegak
Map %1
Peta %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
Penyesuaian
@@ -20166,131 +19912,109 @@ Silahkan coba turunkan resolusi atau gunakan ukuran kertas yang lebih kecilKertas dan kualitas
- Presets
Preset
- ...
- ...
-
-
- Width
Lebar
- Height
Tinggi
- Units
Satuan
- Number of pages
Jumlah halaman
- Orientation
Orientasi
- Export resolution
Resolusi ekspor
- Print as raster
Cetak sebagai raster
-
- Snap tolerance
- Toleransi snap
-
-
- px
- px
-
Change...
Ubah...
- Page background
Halaman latar
+ Grid
- Kotak
+ Kotak
- dpi
dpi
- World file on
Berkas dunia pada
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Jarak grid
- x:
x:
- y:
y:
+ Spacing
- Spasi
+ Spasi
+ Snap to alignments
- Lekatkan ke perataan
+ Lekatkan ke perataan
+ Tolerance
- Toleransi
+ Toleransi
@@ -21466,7 +21190,7 @@ Dan berkas saat ini adalah [%3]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23205,7 +22929,7 @@ Biarkan kosong untuk menerapkan nilai maksimum secara otomatis.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Tidak dapat mengatur kolom '%1' Sebagai kolom pratinjau.
@@ -23534,7 +23258,7 @@ Kesalahan pengurai:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23547,7 +23271,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24650,7 +24374,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -25967,7 +25691,7 @@ Silahkan pilih kembali arsip yang tepat.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26919,17 +26643,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Simbol
- Value
Nilai
- Label
Label
@@ -27022,41 +26746,41 @@ p, li { white-space: pre-wrap; }
Lanjutan
- Symbol levels...
Level Simbol...
- Error
Kesalahan
- There are no available color ramps. You can add them in Style Manager.
Tidak ada color ramp. Anda dapat menambahkannya pada Pengaturan Style.
- The selected color ramp is not available.
Color ramp yang dipilih tidak ada.
- Warning
Peringatan
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
Klasifikasi istirahat Alam (Jenks) adalah O (n2) kompleksitas, klasifikasi Anda mungkin memakan waktu lama.
Tekan membatalkan untuk membatalkan istirahat perhitungan atau OK untuk melanjutkan.
- Renderer creation has failed.
Pembuatan perender gagal.
@@ -27240,9 +26964,7 @@ Tekan membatalkan untuk membatalkan istirahat perhitungan atau OK untuk melanjut
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Apakah anda yakin akan menghapus %n layer yang dipilih?
-
+ Apakah anda yakin akan menghapus %n layer yang dipilih?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28995,7 +28717,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29034,7 +28756,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29096,7 +28818,7 @@ p, li { white-space: pre-wrap; }
<p align="center">Existing mapsets</p>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29874,9 +29596,7 @@ pada baris %2 kolom %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Masih ada %n layer yang tidak dapat ditangani, yang akan hilang jika anda menutupnya sekarang.
-
+ Masih ada %n layer yang tidak dapat ditangani, yang akan hilang jika anda menutupnya sekarang.
@@ -29892,7 +29612,7 @@ pada baris %2 kolom %3
Handle bad layers
- Tangani layer yang jelek
+
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Jaringan kehabisan waktu setelah %n detik tidak aktif.
-Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
-
+ Jaringan kehabisan waktu setelah %n detik tidak aktif.
+Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
@@ -30544,7 +30262,7 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
Merge polygons before rendering (slow)
-
@@ -31204,7 +30922,7 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.Pengaturan pelabelan layer
- Label this layer with
Labeli layer ini dengan
@@ -31284,22 +31002,22 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
...
...
@@ -31355,7 +31073,7 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.Banyak baris
- Automated placement settings (apply to all layers)
Pengaturan penempatan otomatis (berlaku untuk semua layer)
@@ -31385,7 +31103,7 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
Rendering
Merender
@@ -31473,7 +31191,7 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
Alignment
Perataan
@@ -31502,7 +31220,7 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
Force point inside polygon
-
- Discourage labels from covering features
Hindarkan label agar tidak menutupi fitur
@@ -31605,82 +31323,82 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.Penyangga
- Labels will not show if larger than this on screen
Label tidak dimunculkan apabila lebih besar dari yang ada di layar ini
- px
px
- Data defined
Didefinisikan oleh data
- X
X
- Y
Y
- Coordinate
Koordinat
- Preserve data rotation values
Simpan nilai rotasi data
- horizontal
Datar
- vertical
vertikal
- Label options
Opsi pelabelan
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Nilai < 0 mewakili skala lebih dekat dari 1:1, contoh -10 = 10:1. <br> Nilai 0 menghilangkan batas yang ditentukan.
- Maximum
Maksimum
- Pixel size-based visibility (labels in map units)
Tampilan berbasis ukuran piksel (label dalam satuan peta)
- Labels will not show if smaller than this on screen
Label tidak dimunculkan apabila lebih kecil dari yang ada di layar ini
- Minimum
Minimum
@@ -31690,7 +31408,7 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.<
- Scale-based visibility
Visibilitas berdasarkan skala
@@ -31728,17 +31446,17 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.Arah mundur
- Priority
Prioritas
- Low
Rendah
- High
Tinggi
@@ -31891,7 +31609,7 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
Rotation
Perputaran
@@ -31943,17 +31661,17 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.Jarak
- outside
di luar
- inside
di dalam
- Maximum angle between curved characters
Sudut maksimal antara karakter melingkar
@@ -32059,62 +31777,62 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.satuan simbol
- Merge connected lines to avoid duplicate labels
Gabungkan garis yang terhubung untuk menghindari label ganda
- Label every part of multi-part features
Buat label untuk setiap bagian dari fitur dengan yang memiliki banyak bagian
- Feature options
Opsi fitur
- Suppress labeling of features smaller than
Sembunyikan label untuk fitur yang lebih kecil dari
- mm
mm
- Show all labels for this layer (including colliding labels)
Munculkan semua label untuk layer ini (termasuk label yang bertumpuk)
- Show upside-down labels
Munculkan label yang terbalik
- never
Tidak pernah
- when rotation defined
saat rotasi didefinisikan
- always
Selalu
- Limit number of features to be labeled to
Batasi angka fitur yang akan diberi label
- Number of features sent to labeling engine, though not all may be labeled
Jumlah fitur yang dikirim ke mesin pelabelan, meskipun tidak semua akan diberi label
@@ -32124,17 +31842,17 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.Posisi
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Hilangkan centang untuk menulis rotasi berdasar mesin pelabelan pada pin dan NULL pada unpin
- Always show
Selalu munculkan
- Show label
Munculkan label
@@ -32150,12 +31868,12 @@ Ini mungkin masalah dalam koneksi jaringan anda atau pada server WMS.
QgsLayerTreeModel
- Double-click to view legend
Doble klik melihat legenda
- following %1 items
not displayed
item %1 berikut
@@ -32213,12 +31931,12 @@ tidak ditampilkan
QgsLegendModel
- Group
Kelompok
- No Legend Available
Tidak ada Legenda Tersedia
@@ -32445,18 +32163,18 @@ tidak ditampilkan
QgsMapCanvas
- canvas
kanvas
- Rendering
Merender
- Canvas refresh: %1 ms
Segarkan kanvas: %1 ms
@@ -33241,7 +32959,7 @@ tidak ditampilkan
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
An error occured during splitting.
- Kesalahan muncul ketika membagi fitur
+
Adjust scaling range
-
%n more
unread messages
-
- masih %n lagi
-
+ masih %n lagi
@@ -33780,7 +33496,7 @@ tidak ditampilkan
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Koneksi gagal - nama Host belum diisi.
@@ -33789,7 +33505,7 @@ tidak ditampilkan
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Koneksi gagal - Nama basisdata belum diisi.
@@ -35342,9 +35058,7 @@ Informasi kesalahan yang diperpanjang:
Coordinate Reference System (%n available)
crs count
-
- Sistem koordinat referensi (%n tidak tersedia)
-
+ Sistem koordinat referensi (%n tidak tersedia)
Solid
Solid
Dots
Titik
Crosses
Silang
- Detected active locale on your system: %1
Lokal aktif terdeteksi pada sistem anda: %1
- To vertex
Ke verteks
- To segment
Ke segmen
- To vertex and segment
Ke verteks dan segmen
- map units
Satuan peta
- pixels
Piksel
- Semi transparent circle
Lingkaran setengah transparan
- Cross
Silang
- None
Tidak ada
- QGIS files
Berkas QGIS
- Off
Off
- QGIS
QGIS
- GEOS
GEOS
- Round
Bulat
- Mitre
Mitre
- Bevel
Miring
- Save default project
Simpan proyek default
- You must set a default project
Anda harus mengatur sebuah proyek standar
- Current project saved as default
Proyek saat ini disimpan sebagai standar
- Error saving current project as default
Gagal menyimpan proyek saat ini sebagai default
- Choose a directory to store project template files
Pilih direktori untuk menyimpan berkas template proyek
@@ -36473,105 +36187,105 @@ Selalau jaringan: selalu memuat dari jaringan dan tidak memeriksa apakah cache m
Tampilkan Fitur yang nampak pada Peta
- Choose project file to open at launch
Pilih berkas proyek untuk dibuka pada saat memulai
- Create Options - %1 Driver
Opsi pembuatan- %1 Driver
- Create Options - pyramids
Opsi pembuatan - pyramid
- Restore UI defaults
Mengembalikan default UI
- Are you sure to reset the UI to default (needs restart)?
Apakah Anda yakin untuk mengatur ulang UI ke default (dibutuhkan menyalakan kembali/restart)?
- Overwrite
Timpa
- If Undefined
Jika tidak terdefinisi
- Unset
Unset
- Prepend
Tambah
- Append
Tambah
- Choose a directory
Pilih sebuah direktori
- Enter scale
Masukkan skala
- Scale denominator
Denominator skala
- Load scales
Muat skala
- XML files (*.xml *.XML)
Berkas XML (*.xml *.XML)
- Save scales
Simpan skala
- No Stretch
Tanpa regangan
- Stretch To MinMax
Stretch to MinMax
- Stretch And Clip To MinMax
Stretch dan clip to MinMax
- Clip To MinMax
Clip To MinMax
@@ -36591,7 +36305,7 @@ Selalau jaringan: selalu memuat dari jaringan dan tidak memeriksa apakah cache m
General
Umum
@@ -36774,7 +36488,7 @@ Selalau jaringan: selalu memuat dari jaringan dan tidak memeriksa apakah cache m
...
...
@@ -36890,7 +36604,7 @@ Selalau jaringan: selalu memuat dari jaringan dan tidak memeriksa apakah cache m
Remove
Buang
@@ -36898,7 +36612,7 @@ Selalau jaringan: selalu memuat dari jaringan dan tidak memeriksa apakah cache m
Add
Tambah
@@ -37158,22 +36872,7 @@ Selalau jaringan: selalu memuat dari jaringan dan tidak memeriksa apakah cache m
Minimum lebar garis / garis luar dalam milimeter.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Menekan atribut pop-up setelah pembuatan fitur
@@ -37470,18 +37169,22 @@ Selalau jaringan: selalu memuat dari jaringan dan tidak memeriksa apakah cache m
Warna...
+ Grid defaults
- Kotak/grid default
+ Kotak/grid default
+ Spacing
- Spasi
+ Spasi
mm
mm
@@ -37502,370 +37205,372 @@ Selalau jaringan: selalu memuat dari jaringan dan tidak memeriksa apakah cache m
Snap tolerance
Toleransi snap
+ Guide defaults
- Panduan default
+ Panduan default
- Feature creation
Pembuatan fitur
- Validate geometries
Validasi geometri
- Reuse last entered attribute values
Gunakan kembali nilai atribut yang pertama kali dimasukan
- Rubberband
Rubberband
- Line color
Warna garis
- Line width in pixels
Lebar garis dalam piksel
- Line width
Lebar garis
- Snapping
Penguncian
- Default snap mode
Modus penguncian standar
- Default snapping tolerance
Toleransi standar untuk penguncian
- Search radius for vertex edits
Radius pencarian untuk mengedit verteks
- map units
Satuan Peta
pixels
Piksel
- Open snapping options in a dock window (QGIS restart required)
Buka opsi-opsi snapping dalam dock jendela (dibutuhkan restart QGIS)
- Vertex markers
Penanda verteks
- Marker style
Style penanda
- Marker size
Ukuran penanda
- Show markers only for selected features
Perlihatkan penanda hanya untuk fitur yang dipilih
- Curve offset tool
Alat ofset kurva
- Miter limit
Batas miter
- Join style
Bergabung gaya
- Quadrant segments
Segmen kuadran
- GDAL driver options
Opsi-opsi driver GDAL
- Edit Pyramids Options
Opsi Edit Pyramid
- Edit Create Options
Opsi Edit Buat
- GDAL drivers
Driver GDAL
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
Dalam beberapa kasus lebih dari satu driver GDAL dapat digunakan untuk memuat format raster yang sama. Gunakan daftar di bawah untuk menentukan mana yang akan digunakan.
- Name
Nama
- ext
ext
- Flags
Bendera
- Description
Deskripsi
- CRS for new layers
CRS untuk lapisan baru
- Select...
Pilih...
- Use &project CRS
Gunakan &proyek CRS
- Prompt for &CRS
Meminta &CRS
- Use default CRS displa&yed below
Gunakan CRS &standar yang ditampilkan di bawah ini
- When a new layer is created, or when a layer is loaded that has no CRS
Ketika lapisan baru dibuat, atau ketika lapisan yang dimuat tidak memiliki CRS
- Default CRS for new projects
Default CRS untuk proyek baru
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Mengaktifkan secara otomatis proyeksi ulang 'on the fly' jika CRS dari lapisan baru ditambahkan berbeda dari CRS lapisan yang sudah ada. CRS lapisan ini akan digunakan.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Mengaktifkan secara otomatis proyeksi ulang 'on the fly' jika lapisan memiliki CRS yang berbeda
- Always start new projects with this CRS
Selalu awali proyek baru dengan CRS ini
- Enable 'on the &fly' reprojection by default
Aktifkan proyeksi 'on the &fly' sebagai standar
- Don't enable 'on the fly' reprojection
Jangan aktifkan proyeksi ulang 'on the fly'
- Default datum transformations
Default transformasi datum
- Source CRS
Sumber CRS
- Destination CRS
CRS Tujuan
- Source datum transform
Sumber transformasi datum
- Destination datum transform
Transformasi datum tujuan
- Ask for datum transformation when no default is defined
Mintalah transformasi datum bila tidak ada standar didefinisikan
- Override system locale
Abaikan sistem lokal
- Locale to use instead
Gunakan sistem lokal
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Note:</b> Aktifkan / perubahan lokal diharuskan untuk merestart aplikasi
- Additional Info
Informasi tambahan
- Detected active locale on your system:
Lokal aktif terdeteksi pada sistem anda:
- WMS search address
Alamat mencari WMS
- Timeout for network requests (ms)
Batas waktu untuk meminta ke jaringan (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Standar masa kedaluwarsa untuk WMS-C/WMTS tiles (jam)
- Max retry in case of tile request errors
Maks mencoba kembali jika terjadi kesalahan permintaan tile
- User-Agent
Agen-Pengguna
- Cache settings
Pengaturan Cache
- Directory
Direktori
- Size [KiB]
Ukuran [KiB]
- Clear
Hapus
- Use proxy for web access
Gunakan proxy untuk akses internet
- Host
Host
- Port
Port
- User
Pengguna
- Leave this blank if no proxy username / password are required
Biarkan kosong jika tidak ada proxy. dibutuhkan nama pengguna / sandi
- Password
Sandi
- Proxy type
Tipe proxy
- Exclude URLs (starting with)
Pengecualian URL (mulai dengan)
@@ -39731,7 +39436,7 @@ Eror: %2
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Plugin telah lenyap
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
Plugin ini sepertinya telah terinstall tapi saya tidak tau dimana. Mungkin paket plugin berisikan nama direktori yang salah.
Silahkan mencari daftar plugin yang terinstall. Saya hampir yakin anda akan menemukannya disana, hanya saja tidak dapat menentukan yang mana diantaranya. Itu juga berarti bahwa saya tidak dapat menentukan jika plugin ini telah terinstall dan memberitahu anda mengenai status perbaruan. Namun plugin mungkin bekerja. Silahkan menghubungi pemilik plugin dan sampaikan masalah ini.
@@ -40569,7 +40274,7 @@ Anda perlu me-restart QGIS untuk memuatnya.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40587,7 +40292,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40605,7 +40310,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41103,7 +40808,7 @@ Hasil: %3 (%4)
PostgreSQL layer has no primary key.
-
PostgreSQL layer has unknown primary key type.
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
PostgreSQL version: unknown
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -41465,156 +41170,156 @@ Pilih abaikan untuk melanjutkan memuat tanpa layer yang hilang. Pilih batal untu
QgsProjectProperties
- Layer
Layer
- Type
Tipe
- Identifiable
Dapat diidentifikasi
- Vector
Vektor
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
Coordinate System Restriction
- No coordinate systems selected. Disabling restriction.
Tidak ada sistem koordinat yang dipilih. Menonaktifkan pembatasan.
- Selection color
Warna pemilihan
- Measure tool (CRS transformation: %1)
Alat Ukur (transformasi CRS: %1)
- Canvas units (CRS transformation: %1)
Satuan kanvas (transformasi CRS: %1)
+ OFF
MATI
+ ON
HIDUP
- CRS %1 was already selected
CRS %1 telah dipilih
- Coordinate System Restrictions
Coordinate System Restrictions
- The current selection of coordinate systems will be lost.
Proceed?
Pilihan saat ini dari sistem koordinat akan hilang.
Diproses?
- Select print composer
Pilih penyusun cetak
- Composer Title
Judul Penyusun
- Select restricted layers and groups
Pilih lapisan dan kelompok dibatasi
- Enter scale
Masukkan skala
- Scale denominator
Denominator skala
- Load scales
Muat skala
- XML files (*.xml *.XML)
Berkas XML (*.xml *.XML)
- Save scales
Simpan skala
- Select a valid symbol
Pilih sebuah simbol valid
- Invalid symbol :
Simbol tidak valid :
- Parameters:
Parameter:
+ Select %1 from pull-down menu to adjust radii
Pilih %1 dari menu pull-down untuk menyesuaikan jari-jari
- Can only use ellipsoidal calculations when CRS transformation is enabled
Hanya dapat menggunakan perhitungan ellipsoidal ketika transformasi CRS diaktifkan
@@ -41639,7 +41344,6 @@ Diproses?
Project title
Judul proyek
@@ -41679,37 +41383,37 @@ Diproses?
Simpan jalur
- Measure tool
Alat pengukuran
- Semi-minor
Semi-minor
- Semi-major
Semi-mayor
- Used when CRS transformation is turned off
Digunakan ketika transformasi CRS dimatikan
- Canvas units
Satuan kanvas
- Meters
Meter
- Feet
Kaki
@@ -41741,98 +41445,98 @@ Diproses?
Server OWS
- Ellipsoid
(for distance calculations)
Ellipsoid
(penghitungan jarak)
- Degree
Derajat
- Degree display
Tampilan derajat
- Decimal degrees
Derajad Desimal
- Degrees, Minutes
Derajat, Menit
- Degrees, Minutes, Seconds
Derajat, Menit, Detik
- Precision
Presisi
- Automatically sets the number of decimal places in the mouse position display
Tentukan jumlah desimal secara otomatis pada tampilan posisi mouse
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Jumlah bilangan desimal yang digunakan ketika menampilkan posisi mouse yang cukup ditentukan secara otomatis jadi dengan menggerakkan mouse satu piksel memberikan perubahan pada posisi yang ditampilkan
- Automatic
Otomatis
- Sets the number of decimal places to use for the mouse position display
Tentukan jumlah desimal untuk yang digunakan untuk menampilkan posisi mouse
- Manual
Manual
- The number of decimal places for the manual option
Jumlah angka desimal untuk opsi manual
- decimal places
Jumlah angka desimal
- Project scales
Skala proyek
- ...
...
- Enable 'on the fly' CRS transformation
Aktifkan transformasi CRS 'on the fly'
@@ -41842,69 +41546,69 @@ Diproses?
Layer yang dapat diidentifikasi
- Project layers
Lapisan proyek
- Layer
Layer
- Type
Tipe
- Identifiable
Dapat diidentifikasi
- Marker
Penanda
- Line
Garis
- Default symbols
Simbol default
- Fill
Fill
- Color Ramp
Warna Ramp
- Transparency
Transparansi
- %
%
- Style Manager
Manajer Gaya
- Options
Opsi-opsi
@@ -41914,170 +41618,165 @@ Diproses?
Relasi
- Project file
- Berkas proyek
-
-
- Nautical miles
Mil laut
- Assign random colors to symbols
Menetapkan warna acak untuk simbol
- Service capabilities
Kemampuan layanan
- Person
Orang
- Title
Judul
- Organization
Organisasi
- Online resource
Sumberdaya dalam jaringan
- E-Mail
E-mail
- Phone
Telepon
- Abstract
Abstrak
- Fees
Biaya
- Access constraints
Kendala akses
- Keyword list
Daftar kata kunci
- WMS capabilities
Kemampuan WMS
- Add geometry to feature response
Tambahkan geometri untuk fitur respon
- Min. X
X min
- Min. Y
Y min
- Max. X
X max
- Max. Y
Y max
- Use Current Canvas Extent
Gunakan eksten kanvas saat ini
- Used
Digunakan
- Exclude composers
Kecuali penyusun
- WFS capabilities
Kemampuan WFS
- WCS capabilities
Kemampuan WCS
- Exclude layers
Kecuali lapisan
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
Kualitas gambar JPEG ( 10 : gambar terkecil - 100 : kualitas terbaik )
- Published
Diterbitkan
- Update
Perbarui
- Insert
Sisipkan
- Delete
Hapus
- Unselect all
Hapus semua pilihan
- Select all
Pilih semuanya
@@ -42088,39 +41787,39 @@ Diproses?
Macro
- Advertised URL
URL diiklankan
- Width
Lebar
- Height
Tinggi
- Maximums for GetMap request
Permintaan maksimum GetMap
- Advertised extent
Batas diiklankan
- CRS restrictions
Pembatasan CRS
- Python macros
Python macro
@@ -42234,9 +41933,7 @@ Karena pemilihan proyeksi ini tidak akan bekerja...
The where clause returned %n row(s).
returned test rows
-
- Dimana pengembalian klausa %n baris.
-
+ Dimana pengembalian klausa %n baris.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42310,7 +42007,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42321,7 +42018,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42337,7 +42034,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -44001,7 +43698,7 @@ Klik pada tombol bantuan untuk mendapat opsi pembuata yang valid untuk format in
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45082,9 +44779,7 @@ standar deviasi ×
Filter returned %n feature(s)
number of filtered features
-
- Penyaring menghasilkan %n fitur
-
+ Penyaring menghasilkan %n fitur
@@ -45774,9 +45469,7 @@ standar deviasi ×
Found %n matching feature(s).
test result
-
- Menemukan %n fitur yang sesuai.
-
+ Menemukan %n fitur yang sesuai.
Validation finished (%n error(s) found).
number of geometry errors
-
- Validasi selesai (%n kesalahan ditemukan).
-
+ Validasi selesai (%n kesalahan ditemukan).
Cannot add connection '%1' : a connection with the same name already exists.
-
%n selected geometries
selected geometries
-
- %n terpilih geometri
-
+ %n terpilih geometri
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47329,7 +47018,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47942,8 +47631,8 @@ Apakah Anda ingin menimpa relasi [%2]?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47980,100 +47669,150 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Gagal memuat antarmuka
+ Gagal memuat antarmuka
+ Failed to connect to database
- Gagal tersambung ke basisdata
+ Gagal tersambung ke basisdata
+ A connection to the SQL Anywhere database cannot be established.
- Sambungan ke basisdata SQL Anywhere tidak dapat dibangun.
+ Sambungan ke basisdata SQL Anywhere tidak dapat dibangun.
+ No suitable key column
- Tidak ada kolom kunci yang cocok
+ Tidak ada kolom kunci yang cocok
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
- Eror memuat atribut
+ Eror memuat atribut
+ Ambiguous field!
- Kolom membingungkan!
+ Kolom membingungkan!
+ Duplicate field %1 found
- Duplikat kolom %1 ditemukan
+ Duplikat kolom %1 ditemukan
+ Read attempt on an invalid SqlAnywhere data source
- Baca upaya pada sumber data SqlAnywhere tdak valid
+ Baca upaya pada sumber data SqlAnywhere tdak valid
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Eror memasukkan fitur
+ Eror memasukkan fitur
+ Error deleting features
- Eror menghapus fitur
+ Eror menghapus fitur
+ Error adding attributes
- Eror menambahkan atribut
+ Eror menambahkan atribut
+ Error deleting attributes
- Eror menghapus atribut
+ Eror menghapus atribut
+ Attribute not found
- Atribut tidak ditemukan
+ Atribut tidak ditemukan
+ Error updating attributes
- Eror memperbarui atribut
+ Eror memperbarui atribut
+ Error updating features
- Eror memperbarui fitur
+ Eror memperbarui fitur
+ Error verifying geometry column %1
- Eror memverifikasi kolom geometri %1
+ Eror memverifikasi kolom geometri %1
+ Unknown geometry type
- Tipe geometri tidak diketahui
+ Tipe geometri tidak diketahui
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
- Penggabungan Spasial Sistem Referensi
+ Penggabungan Spasial Sistem Referensi
+ Error checking database ReadOnly property
- Eror memeriksa properti basisdata ReadOnly
+ Eror memeriksa properti basisdata ReadOnly
+ Error loading SRS definition
- Eror memuat definisi SRS
+ Eror memuat definisi SRS
+ Limited Support of Round Earth SRS
- Dukungan Terbatas dari Round Earth SRS
+ Dukungan Terbatas dari Round Earth SRS
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- Kolom %1 (%2) berisi geometri milik sistem referensi spasial bumi bulat (SRID=%3). %4
+ Kolom %1 (%2) berisi geometri milik sistem referensi spasial bumi bulat (SRID=%3). %4
Pembaruan nilai geometri akan dinonaktifkan, dan kinerja query mungkin kurang karena indeks spasial tidak akan digunakan. Untuk meningkatkan kinerja, mempertimbangkan membuat indeks spasial pada kolom baru (mungkin dihitung) yang berisi proyeksi planar geometri tersebut. Untuk bantuan, lihat deskripsi ST_SRID(INT) and ST_Transform(INT) methods dalam dokumentasi SQL Anywhere.
@@ -48098,12 +47837,12 @@ Pembaruan nilai geometri akan dinonaktifkan, dan kinerja query mungkin kurang ka
file specified below
-
URL specified below
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Simbol dengan nama '%1' sudah ada.
Ditimpa?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Warna ramp dengan nama '%1' sudah ada.
Ditimpa?
@@ -48578,7 +48317,7 @@ Ada masalah dengan basisdata simbol Anda.
Un-group
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -49615,7 +49354,7 @@ p, li { white-space: pre-wrap; }
Adjust scaling range
-
@@ -49681,7 +49420,7 @@ Eror was:%2
Edit filter expression
-
@@ -50123,33 +49862,25 @@ Eror was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- BERHASIL: %n atribut telah dihapus.
-
+ BERHASIL: %n atribut telah dihapus.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- GAGAL: %n atributt tidak dapat di hapus.
-
+ GAGAL: %n atributt tidak dapat di hapus.
SUCCESS: %n attribute(s) added.
added attributes count
-
- BERHASIL: %n atribut telah ditambahkan.
-
+ BERHASIL: %n atribut telah ditambahkan.
ERROR: %n new attribute(s) not added
not added attributes count
-
- GAGAL: %n atribut baru tidak dapat ditambahkan
-
+ GAGAL: %n atribut baru tidak dapat ditambahkan
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- BERHASIL: %n nilai atribut telah dirubah.
-
+ BERHASIL: %n nilai atribut telah dirubah.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- GAGAL: %n nilai perubahan atribut tidak bisa dilakukan.
-
+ GAGAL: %n nilai perubahan atribut tidak bisa dilakukan.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- SUKSES: %n fitur telah dihapus.
-
+ SUKSES: %n fitur telah dihapus.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- GAGAL: %n fitur tidak dapat dihapus.
-
+ GAGAL: %n fitur tidak dapat dihapus.
SUCCESS: %n feature(s) added.
added features count
-
- BERHASIL: %n fitur telah ditambahkan.
-
+ BERHASIL: %n fitur telah ditambahkan.
ERROR: %n feature(s) not added.
not added features count
-
- GAGAL: %n fitur tidak dapat ditambahkan.
-
+ GAGAL: %n fitur tidak dapat ditambahkan.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- GAGAL: %n fitur tidak ditambahkan - provider tidak mendukung penambahan fitur.
-
+ GAGAL: %n fitur tidak ditambahkan - provider tidak mendukung penambahan fitur.
SUCCESS: %n geometries were changed.
changed geometries count
-
- BERHASIL: %n geometri telah dirubah.
-
+ BERHASIL: %n geometri telah dirubah.
ERROR: %n geometries not changed.
not changed geometries count
-
- GAGAL: %n geonetri tidak dapat dirubah.
-
+ GAGAL: %n geonetri tidak dapat dirubah.
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
unhandled response: %1
-
@@ -51353,22 +51066,20 @@ Eror was:%2
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
- Opsi (sistem koordinat referensi %n tersedia)
-
+ Opsi (sistem koordinat referensi %n tersedia)
Coordinate Reference System (%n available)
crs count
-
- Sistem koordinat referensi (%n tidak tersedia)
-
+ Sistem koordinat referensi (%n tidak tersedia)
%n Layer(s) selected
selected layer count
-
- %n layer yang dipilih
-
+ %n layer yang dipilih
Service Exception
- Pengecualian Layanan
+
(and %n more)
crs
-
- (dan %n lagi)
-
+ (dan %n lagi)
RasterIO error:
-
@@ -52183,7 +51888,7 @@ Response was:
Field contains a filename or URL for a webpage
-
%n tile requests in background
tile request count
-
- %n permintaan tile di belakang layar
-
+ %n permintaan tile di belakang layar
, %n cache hits
tile cache hits
-
- , %n cache dihitung
-
+ , %n cache dihitung
, %n cache misses.
tile cache missed
-
- , %n cache dilewati.
-
+ , %n cache dilewati.
, %n errors.
errors
-
- , %n kesalahan.
-
+ , %n kesalahan.
(and %n more)
crs
-
- (dan %n lagi)
-
+ (dan %n lagi)
LegendURLs
-
GetLegendGraphic
-
Identifier
-
Tile mode
-
Invalid tile mode
-
Selected tile matrix set
-
Matrix extent [mu]
-
Bounds
-
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Context not fully specified (extent was defined but width and/or height was not).
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52990,19 +52681,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
- Status: %1
-Ungkapan alasan: %2
+
Tile request error (Title:%1; Error:%2; URL: %3)
-
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
- %n permintaan tile di belakang layar
-
+
, %n cache hits
tile cache hits
-
- , %n cache dihitung
-
+
, %n cache misses.
tile cache missed
-
- , %n cache dilewati.
-
+
, %n errors.
errors
-
- , %n eror.
-
+ , %n eror.
Not logging more than 100 request errors.
- Tidak bisa menyimpan lebih dari 100 eror permintaan.
+
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -53454,62 +53136,76 @@ Ungkapan alasan: %2
SaDbTableModel
+ Schema
- Skema
+ Skema
+ Table
- Tabel
+ Tabel
+ Type
- Tipe
+ Tipe
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretasi Garis
+ Interpretasi Garis
+ Geometry column
- Kolom geometri
+ Kolom geometri
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Simpan koneksi
+ Simpan koneksi
+ Should the existing connection %1 be overwritten?
- Apakan koneksi %1 yang sudah ada bisa di timpa?
+ Apakan koneksi %1 yang sudah ada bisa di timpa?
+ Failed to load interface
- Gagal memuat antarmuka
+ Gagal memuat antarmuka
+ Test connection
- Coba koneksi
+ Coba koneksi
+ Connection to %1 was successful
- Koneksi ke %1 berhasil
+ Koneksi ke %1 berhasil
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- koneksi gagal. Periksa pengaturan dan coba lagi.
+ koneksi gagal. Periksa pengaturan dan coba lagi.
Kode kesalahan SQLAnywhere: %1
Deskripsi: %2
@@ -53518,276 +53214,348 @@ Deskripsi: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Buat koneksi SqlAnywhere baru
+ Buat koneksi SqlAnywhere baru
+ Connection Information
- Informasi Koneksi
+ Informasi Koneksi
+ Name
- Nama
+ Nama
+ Host
- Host
+ Host
+ Port
- Port
+ Port
+ Server
- Server
+ Server
+ Database
- Basisdata
+ Basisdata
+ Connection Parameters
- Parameter koneksi
+ Parameter koneksi
+ Username
- Nama Pengguna
+ Nama Pengguna
+ Password
- Sandi
+ Sandi
+ Name of the new connection
- Nama koneksi baru
+ Nama koneksi baru
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Nama atau alamat IP dari komputer tempat menyediaan server basisdata (biarkan kosong untuk koneksi lokal)
+ Nama atau alamat IP dari komputer tempat menyediaan server basisdata (biarkan kosong untuk koneksi lokal)
+ Port number used by the database server (leave blank for default 2638)
- Bulangan port digunakan oleh server basisdata (biarkan kosong untuk nilai standar 2638)
+ Bulangan port digunakan oleh server basisdata (biarkan kosong untuk nilai standar 2638)
+ Name of the database server (leave blank for default server on host)
- Nama dari server basisdata (biarkan kosong untuk server standar pada host
+ Nama dari server basisdata (biarkan kosong untuk server standar pada host
+ Name of the database (leave blank for default database on server)
- Nama basisdata (biarkan kosong untuk basisdata standar pada server)
+ Nama basisdata (biarkan kosong untuk basisdata standar pada server)
+ Additional connection parameters
- Parameter koneksi tambahan
+ Parameter koneksi tambahan
+ Database username
- Nama pengguna basisdata
+ Nama pengguna basisdata
+ Database password
- Sandi basisdata
+ Sandi basisdata
+ Save the connection username in the registry
- Simpan koneksi nama pengguna pada registry
+ Simpan koneksi nama pengguna pada registry
+ Save Username
- Simpan nama pengguna
+ Simpan nama pengguna
+ &Test Connect
- &Coba hubungkan
+ &Coba hubungkan
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Simpan sandi koneksi di registry (PERHATIAN: INI TIDAK AMAN)
+ Simpan sandi koneksi di registry (PERHATIAN: INI TIDAK AMAN)
+ Save Password
- Simpan Sandi
+ Simpan Sandi
+ Encrypt packets using simple encryption
- Enkripsi paket dengan enkripsi sederhana
+ Enkripsi paket dengan enkripsi sederhana
+ Simple Encryption
- Enkripsi sederhana
+ Enkripsi sederhana
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Gunakan estimasi untuk properti layer tertentu seperti kardinalitas, extent, dll. (meningkatkan performa)
+ Gunakan estimasi untuk properti layer tertentu seperti kardinalitas, extent, dll. (meningkatkan performa)
+ Estimate table metadata
- Estimasi tabel metadata
+ Estimasi tabel metadata
+ Search for geometry columns in tables owned by other users
- Cari kolom geometri pada tabel yang dimiliki oleh pengguna lainnya
+ Cari kolom geometri pada tabel yang dimiliki oleh pengguna lainnya
+ Search other users' tables
- Cari tabel pengguna yang lainnya
+ Cari tabel pengguna yang lainnya
SaSourceSelect
+ &Add
- &Tambahkan
+ &Tambahkan
+ &Set Filter
- &Atur Penyaring
+ &Atur Penyaring
+ Wildcard
- WildCard
+ WildCard
+ RegExp
- RegExp
+ RegExp
+ All
- Semua
+ Semua
+ Schema
- Skema
+ Skema
+ Table
- Tabel
+ Tabel
+ Type
- Tipe
+ Tipe
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretasi Garis
+ Interpretasi Garis
+ Geometry column
- geometri kolom
+ geometri kolom
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Apakah anda yakin ingin menghapus koneksi %1 dan semua pengaturan yang berhubungan dengannya?
+ Apakah anda yakin ingin menghapus koneksi %1 dan semua pengaturan yang berhubungan dengannya?
+ Confirm Delete
- Konfirmasi penghapusan
+ Konfirmasi penghapusan
+ Select Table
- Pilih Tabel
+ Pilih Tabel
+ You must select a table in order to add a layer.
- Anda harus memilih tabel untuk menambahkan layer.
+ Anda harus memilih tabel untuk menambahkan layer.
+ Failed to load interface
- Gagal memuat antarmuka
+ Gagal memuat antarmuka
+ Connection failed
- Koneksi gagal
+ Koneksi gagal
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Koneksi ke basisdata %1 gagal. Periksa pengaturan dan coba kembali.
+ Koneksi ke basisdata %1 gagal. Periksa pengaturan dan coba kembali.
Kode kesalahan SQL Anywhere:%2
Deskripsi: %3
+ No accessible tables found
- Tabel yang dapat diakses tidak ditemukan
+ Tabel yang dapat diakses tidak ditemukan
+ Database connection was successful, but no tables containing geometry columns were %1.
- Koneksi basisdata berhasil, tetapi tidak ada tabel yang berisikan kolom geometri %1.
+ Koneksi basisdata berhasil, tetapi tidak ada tabel yang berisikan kolom geometri %1.
+ found
- Ditemukan
+ Ditemukan
+ found in your schema
- Ditemukan dalam skema anda
+ Ditemukan dalam skema anda
SaSourceSelectBase
+ Add SQL Anywhere layer
- Tambahkan layer SQL Anywhere
+ Tambahkan layer SQL Anywhere
+ SQL Anywhere Connections
- Koneksi SQL Anywhere
+ Koneksi SQL Anywhere
+ Delete
- Hapus
+ Hapus
+ Edit
- Edit
+ Edit
+ New
- Baru
+ Baru
+ Connect
- Hubungkan
+ Hubungkan
+ Search options
- Opsi pencarian
+ Opsi pencarian
+ Search
- Cari
+ Cari
+ Search mode
- Modus pencarian
+ Modus pencarian
+ Search in columns
- Dari di kolom
+ Dari di kolom
SaveAsPythonScriptAction
I/O error
- Kesalahan I/O
+ Kesalahan I/O
Unable to save edits. Reason:
%s
- Tidak bisa menyimpan perubahan. Alasan:
+ Tidak bisa menyimpan perubahan. Alasan:
%s
@@ -54122,20 +53890,24 @@ Deskripsi: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Tambahkan layer SQL Anywhere...
+ Tambahkan layer SQL Anywhere...
+ Store vector layers within a SQL Anywhere database
- Simpan layer vektor dengan database SQL Anywhere
+ Simpan layer vektor dengan database SQL Anywhere
+ Invalid Layer
- Layer tidak benar
+ Layer tidak benar
+ %1 is an invalid layer and cannot be loaded.
- %1 adalah layer tidak valid dan tidak dapat dimuat.
+ %1 adalah layer tidak valid dan tidak dapat dimuat.
@@ -54364,7 +54136,7 @@ Deskripsi: %3
Force point inside polygon
-
@@ -55473,7 +55245,7 @@ Jalankan kembali pengujian topologi.
context_help
- <h3>Database connection</h3>
<h3>Sambungan Basisdata</h3
@@ -55569,7 +55341,7 @@ You may also tick an <label>Open feature form, if a single feature is iden
Identifiable layers can be set in the Project Properties dialog <label>Settings > Project Properties > Identifiable layers</label> where all the layers names are listed, their type (vector, raster, etc.) and ability to be identified.
</p>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55644,7 +55416,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55654,7 +55426,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -57440,7 +57290,7 @@ Untuk bantuan kirim email ke scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -58208,7 +58058,7 @@ Plugin akan dinonaktifkan.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -58224,1869 +58074,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
- <h3>fungsi $uuid</h3>
-Menghasilkan Universally Unique Identifier (UUID) untuk setiap baris dengan menggunakan metode Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>. Setiap UUID mempunyai 38 karakter.
-
-<h4>Sintaks</h4>
-<pre>$uuid</pre>
-
-<h4>Argumen</h4>
-None
-
-<h4>Contoh</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+ <h3>fungsi $uuid</h3>
+Menghasilkan Universally Unique Identifier (UUID) untuk setiap baris dengan menggunakan metode Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>. Setiap UUID mempunyai 38 karakter.
+
+<h4>Sintaks</h4>
+<pre>$uuid</pre>
+
+<h4>Argumen</h4>
+None
+
+<h4>Contoh</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -60139,10 +59935,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60156,10 +59952,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -60180,10 +59976,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -60196,12 +59992,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -60217,16 +60013,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -60255,15 +60051,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -60280,17 +60076,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -60304,17 +60100,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -60330,16 +60126,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -60353,10 +60149,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -60369,10 +60165,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -60386,12 +60182,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -60405,12 +60201,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -60425,17 +60221,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -60445,10 +60241,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -60463,12 +60259,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -60482,12 +60278,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -60501,10 +60297,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -60521,12 +60317,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -60540,17 +60336,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -60565,10 +60361,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -60579,12 +60375,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -60598,17 +60394,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -60621,12 +60417,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -60643,14 +60439,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -60664,15 +60460,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -60681,15 +60477,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -60720,14 +60516,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -60746,14 +60542,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -60858,12 +60654,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -60877,10 +60673,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -60894,10 +60690,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -60914,10 +60710,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -60933,9 +60729,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -61195,12 +60991,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Cats
-
Cats (select from the map or using their id)
-
Convex hull
-
Create a MASK for limiting raster operation
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create parallel line to input lines
-
Create points/segments from input vector lines and positions
-
Create random cell values with spatial dependence
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create shaded map
-
Create slope raster from DEM (digital elevation model)
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Drop column from attribute table
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export raster to POVRAY height-field file
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Gaussian kernel density
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Graphical raster map calculator
-
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Minimum size for each basin (number of cells)
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Output GML file
-
Output Shapefile
- Keluaran shapefile
+
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
- Overlay (Multiply+Screen)
+
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Projection conversion of vector
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Split lines to shorter segments
-
Sum raster cell values
-
Surface management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Tests of normality on vector points
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
@@ -63492,4 +63288,4 @@ Returns a string representation of a color based on its hue, saturation, value a
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_is.ts b/i18n/qgis_is.ts
index ba7a2788aa4..f5ccef94f7b 100644
--- a/i18n/qgis_is.ts
+++ b/i18n/qgis_is.ts
@@ -1,12 +1,10 @@
-
-
-
+
APIsDialogPythonConsole
Generating prepared API file (please wait)...
-
@@ -25,15 +23,15 @@
Setting
-
Value
- Gildi
+
Providers
-
Wrong value
@@ -113,111 +111,111 @@
DBManager
Sorry
-
No database selected or you are not connected to it.
- Engin gagnagrunnur valinn eða þú ert ekki tengd/ur við hann.
+
Select the table you want export to file.
-
DB Manager
-
Info
-
Table
- Tafla
+
Preview
- Forskoðun
+
&Database
- &Gagnagrunnur
+
&Schema
-
&Table
-
&Refresh
-
&SQL window
-
&Exit
-
&Import layer/file
-
&Export to file
-
DBManagerPlugin
Sorry
-
Unable to find a valid unique field
-
Copy
- Afrita
+
DB Manager
-
Server version:
-
Host:
-
User:
-
Library:
-
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
-
create new schemas
-
create temporary tables
-
Not connected
@@ -225,127 +223,127 @@ This table is essential for many GIS applications for enumeration of tables.
Connection details
- Lýsing tengingar
+
General info
-
<warning> %s support not enabled!
-
<warning> This user has no privileges!
-
User has privileges:
-
Privileges
-
Owner:
-
Comment:
-
create new objects
-
access objects
-
Schema details
-
<warning> This user has no privileges to access this schema!
-
Relation type:
-
View
- Skoða
+
Table
- Tafla
+
Rows:
-
Unknown (<a href="action:rows/count">find out</a>)
-
Name
- Nafn
+
Type
- Tegund
+
Null
-
Default
-
Column(s)
-
Function
-
<warning> This is not a spatial table.
-
Fields
- Svæði
+
Constraints
- Hömlur
+
Indexes
- Vísar
+
Triggers
-
View definition
-
Column:
-
Geometry:
-
Dimension:
@@ -353,85 +351,85 @@ This table is essential for many GIS applications for enumeration of tables.
Undefined
- Óskilgreint
+
Spatial ref:
-
Estimated extent:
-
(unknown) (<a href="action:extent/get">find out</a>)
-
Extent:
-
<warning> There isn't entry in geometry_columns!
-
<warning> No spatial index defined (<a href="action:spatialindex/create">create it</a>)
-
Pages:
-
Rows (estimation):
-
Privileges:
-
<warning> This user doesn't have usage privileges for this schema!
-
Rows (counted):
-
<warning> This user has read-only privileges.
-
<warning> There's a significant difference between estimated and real row count. Consider running <a href="action:vacuumanalyze/run">VACUUM ANALYZE</a>.
-
<warning> No primary key defined for this table!
-
Scripts:
-
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
-
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
-
Length
- Lengd
+
Enabled
- Virkt
+
Yes
@@ -439,167 +437,167 @@ This table is essential for many GIS applications for enumeration of tables.
No
- Nei
+
<a href="action:triggers/enable">Enable all triggers</a> / <a href="action:triggers/disable">Disable all triggers</a>
-
Definition
-
Rules
-
&Versioning
-
&Table
-
"{0}" not found
-
Filename:
-
SQLite version:
-
Error:
%s
-
Query:
%s
-
&Re-connect
-
&Database
- &Gagnagrunnur
+
&Create schema
-
&Schema
-
&Delete (empty) schema
-
Delete selected item
- Eyða valinn hlut
+
&Create table
-
&Edit table
-
&Delete table/view
-
&Empty table
-
&Move to schema
-
Cannot delete the selected item.
-
No database selected or you are not connected to it.
- Engin gagnagrunnur valinn eða þú ert ekki tengd/ur við hann.
+
New schema
-
Enter new schema name
-
Select an empty SCHEMA for deletion.
-
hey!
-
Really delete schema %s?
-
Select a TABLE for editation.
-
Select a TABLE/VIEW for deletion.
-
Really delete table/view %s?
-
Select a TABLE to empty it.
-
Really delete all items from table %s?
-
Select a TABLE/VIEW.
-
Do you want to %s all triggers?
-
Table triggers
-
Do you want to %s trigger %s?
-
Table trigger
-
Do you want to %s spatial index for field %s?
-
Spatial Index
@@ -607,7 +605,7 @@ Query:
Check
-
Primary key
@@ -615,49 +613,49 @@ Query:
Foreign key
-
Unique
- Einstakt
+
Exclusion
-
Unknown
-
DBModel
Databases
-
Invalid layer
-
Unable to load the layer %s
-
DBTree
Rename
-
Delete
- Eyða
+
Add to canvas
-
Re-connect
@@ -1024,12 +1022,12 @@ Query:
Store
-
Delete
- Eyða
+
Summary distance matrix (mean, std. dev., min, max)
-
Use only the nearest (k) target points
-
Output distance matrix
-
Output count field name
-
PNTCNT
-
Stratified Sampling Design (Individual polygons)
-
Projection Management Tool
-
Input spatial reference system
-
Output spatial reference system
-
Use predefined spatial reference system
-
Import spatial reference system
-
Generate Regular Points
-
Input Coordinates
-
Grid Spacing
-
Use this point spacing
-
Apply random offset to point spacing
-
Initial inset from corner (LH side)
-
Spatial Join
-
Attribute Summary
-
Take summary of intersecting features
-
Median
- Miðgildi
+
Take attributes of first located feature
-
Keep all records (including non-matching target records)
-
Input subset field (unique ID field)
-
Sum Line Length In Polygons
-
Output summed length field name
-
Parameters
- Breytur
+
X
-
Lock 1:1 ratio
-
Y
-
Output grid as polygons
-
Output grid as lines
-
Vector Split
-
Output folder
-
List Unique Values
-
Target field
-
Unique values list
-
Unique value count
-
Save errors location
-
Press Ctrl+C to copy results to the clipboard
-
Vector grid
@@ -1972,7 +1970,7 @@ dálka
Please specify output shapefile
-
Invalid extent coordinates entered
@@ -1988,7 +1986,7 @@ dálka
Regular points
-
Please specify input layer
@@ -2000,11 +1998,11 @@ dálka
Mean coordinates
-
Standard distance
-
(Optional) Weight field
@@ -2016,36 +2014,36 @@ dálka
Coordinate statistics
-
No input vector layer specified
-
There were %d vertices in original dataset which
were reduced to %d vertices after simplification
-
Processing of the following layers/files ended with error:<br><br>
-
Join attributes by location
-
Please specify target vector layer
-
Please specify join vector layer
-
Please specify at least one summary statistic
-
CRS warning!
@@ -2054,15 +2052,15 @@ were reduced to %d vertices after simplification
Warning: Input layers have non-matching CRS.
This may cause unexpected results.
-
Summary field
-
Error deleting shapefile
-
Sum line lengths
@@ -2074,24 +2072,24 @@ This may cause unexpected results.
Please specify input polygon vector layer
-
Please specify input line vector layer
-
Please specify output length field
-
length field
Lengdarsvæði
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
-
Split vector layer
@@ -2115,11 +2113,11 @@ This may cause unexpected results.
Please specify input point vector layer
-
Please specify output count field
-
Random selection within subsets
@@ -2127,19 +2125,19 @@ This may cause unexpected results.
Can't delete file %s
-
Error loading output shapefile:
%s
-
Created output shapefile:
%s
Would you like to add the new layer to the TOC?
-
Please specify input vector layer
@@ -2147,16 +2145,16 @@ Would you like to add the new layer to the TOC?
Please specify an input field
-
Defined Projection For:
%s.shp
-
Random Points
-
No input layer specified
@@ -2164,11 +2162,11 @@ Would you like to add the new layer to the TOC?
unstratified
-
stratified
-
density
@@ -2184,92 +2182,92 @@ Would you like to add the new layer to the TOC?
Selected features: %s
-
Commit error:
%s
-
Could not replace geometry of feature with id %s
-
Could not eliminate features with these ids:
%s
-
Created output shapefile:
%s
-
Line intersections
-
Please specify input line layer
-
Please specify line intersect layer
-
Created output shapefiles in folder:
%s
-
Please specify input unique ID field
-
Please specify intersect unique ID field
-
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Distance matrix
-
Create Point Distance Matrix
-
Please specify input point layer
-
Please specify output file
-
Please specify target point layer
-
Please specify target unique ID field
-
Created output matrix:
-
Finished
- Lokið
+
Processing completed.
- Vinnslu lokið.
+
Select directory with shapefiles to merge
@@ -2277,7 +2275,7 @@ Would you like to add the new layer to the TOC?
No shapefiles found
-
There are no shapefiles in this directory. Please select another one.
@@ -2285,15 +2283,15 @@ Would you like to add the new layer to the TOC?
Input files
-
No output file
-
Please specify output file.
-
There are no shapefiles with the given geometry type. Please select an available geometry type.
@@ -2317,7 +2315,7 @@ Would you like to add the new layer to the TOC?
Please specify spatial reference system
-
Cannot define projection for PostGIS data...yet!
@@ -2327,11 +2325,11 @@ Would you like to add the new layer to the TOC?
Identical output spatial reference system chosen
Are you sure you want to proceed?
-
Output spatial reference system is not valid
-
Please select the projection system that defines the current layer.
@@ -2343,7 +2341,7 @@ Are you sure you want to proceed?
Export to new projection
-
No Valid CRS selected
@@ -2351,23 +2349,23 @@ Are you sure you want to proceed?
Densify geometries
-
Vertices to add
-
Warning
- Viðvörun
+
Please specify an input layer
- Vinsamlega tiltakið inntakslag
+
Simplify results
-
Error
@@ -2386,47 +2384,24 @@ Are you sure you want to proceed?
fjarlægja úr núverandi vali
- Select by location
Velja eftir staðsetningu
- Select features in:
Velja fitjur í:
- that intersect features in:
-
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Breyta núverandi vali með:
+ Breyta núverandi vali með:
Use selected features only
- Nota aðeins valdar fitjur
+ Nota aðeins valdar fitjur
Please specify select layer
@@ -2434,7 +2409,7 @@ Are you sure you want to proceed?
Eliminate
-
No selection in input layer
@@ -2446,22 +2421,22 @@ Are you sure you want to proceed?
Could not delete features
-
Could not add features
-
DlgAddGeometryColumn
Sorry
-
field name must not be empty
-
@@ -2469,32 +2444,32 @@ Are you sure you want to proceed?
Autofill settings
-
Autofill mode
-
Do not autofill
-
Fill with numbers
-
Fill with parameter values
-
Parameter to use
-
@@ -2502,19 +2477,19 @@ Are you sure you want to proceed?
Processing options
-
Enter setting name to filter list
-
DlgCreateIndex
Error
- Villa
+
Please enter some name for the index
@@ -2525,11 +2500,11 @@ Are you sure you want to proceed?
DlgCreateTable
&Create
-
Sorry
-
no field selected
@@ -2537,7 +2512,7 @@ Are you sure you want to proceed?
field is at top already
-
No field selected
@@ -2545,7 +2520,7 @@ Are you sure you want to proceed?
field is at bottom already
-
select schema!
@@ -2553,42 +2528,42 @@ Are you sure you want to proceed?
enter table name!
-
add some fields!
-
set geometry column name
-
Good
-
everything went fine
-
DlgExportVector
Choose where to save the file
-
Shapefiles
-
Export to file
-
Output table name is required
-
Invalid source srid: must be an integer
@@ -2601,26 +2576,26 @@ Are you sure you want to proceed?
Error %d
%s
-
Export finished.
-
DlgFieldProperties
Sorry
-
field name must not be empty
-
field type must not be empty
-
@@ -2628,12 +2603,12 @@ Are you sure you want to proceed?
Get scripts and models
-
about:blank
-
@@ -2641,12 +2616,12 @@ Are you sure you want to proceed?
Help editor
-
about:blank
-
Element description
-
@@ -2664,26 +2639,26 @@ Are you sure you want to proceed?
History and log
-
DlgImportVector
Choose the file to import
-
Import to database
-
Input layer missing or not valid
-
Output table name is required
-
Invalid source srid: must be an integer
@@ -2696,11 +2671,11 @@ Are you sure you want to proceed?
Error %d
%s
-
Import was successful.
-
@@ -2708,12 +2683,12 @@ Are you sure you want to proceed?
Processing modeler
-
Open model
-
...
- ...
+
Save
- Vista
+
Save as...
-
Export as image
-
Edit model help
-
Run model
-
Inputs
-
Algorithms
-
Enter algorithm name to filter list
-
Enter model name here
-
Enter group name here
-
@@ -2789,17 +2764,17 @@ Are you sure you want to proceed?
Enter number or expression
-
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -2807,17 +2782,17 @@ Are you sure you want to proceed?
Dialog
- Valmynd
+
Output
- Úttak
+
Style
- Stíll
+
@@ -2825,12 +2800,12 @@ Are you sure you want to proceed?
Results
-
about:blank
-
@@ -2838,12 +2813,12 @@ Are you sure you want to proceed?
Script editor
-
Save
- Vista
+
...
- ...
+
Save as...
-
Edit script help
-
Run algorithm
-
Cut
-
Copy
- Afrita
+
Paste
-
Undo
- Afturkalla
+
Redo
- Endurgera
+
DlgSqlWindow
%d rows, %.1f seconds
-
Sorry
-
You must fill the required fields:
@@ -2920,7 +2895,7 @@ rúmfræðidálkur - dálkur með einkvæmum heiltölugildum
DlgTableProperties
Sorry
-
nothing selected
@@ -2928,15 +2903,15 @@ rúmfræðidálkur - dálkur með einkvæmum heiltölugildum
Are you sure
-
really delete column '%s'?
-
really delete constraint '%s'?
-
The selected table has no geometry
@@ -2944,7 +2919,7 @@ rúmfræðidálkur - dálkur með einkvæmum heiltölugildum
Create?
-
Create spatial index for field %s?
@@ -2964,7 +2939,7 @@ rúmfræðidálkur - dálkur með einkvæmum heiltölugildum
Add versioning support to a table
-
Schema
- Skema
+
Table
- Tafla
+
create a view with current content (<TABLE>_current)
-
New columns
-
Prim. key
-
id_hist
-
Start time
-
time_start
-
End time
-
time_end
-
SQL to be executed:
-
@@ -3032,87 +3007,87 @@ rúmfræðidálkur - dálkur með einkvæmum heiltölugildum
Field calculator
-
Create a new field
-
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
- Nákvæmni
+
Input layer
- Inntakslag
+
Update existing field
-
Output file
-
...
- ...
+
FieldsCalculatorDialog
[Save to temporary file]
-
Save file
- Vista skrá
+
Unable to execute algorithm
-
Wrong or missing parameter values
-
FileDirectorySelector
...
- ...
+
Select directory
-
Select file
@@ -3120,18 +3095,18 @@ rúmfræðidálkur - dálkur með einkvæmum heiltölugildum
All files (*.*)
-
GdalTools
&Input directory
-
&Output directory
-
The selected file is not a supported OGR format
@@ -3139,11 +3114,11 @@ rúmfræðidálkur - dálkur með einkvæmum heiltölugildum
The process failed to start. Either the invoked program is missing, or you may have insufficient permissions to invoke the program.
-
The process crashed some time after starting successfully.
-
An unknown error occurred.
@@ -3157,24 +3132,24 @@ rúmfræðidálkur - dálkur með einkvæmum heiltölugildum
Unable to load {0} plugin.
The required "{1}" module is missing.
Install it and try again.
-
QGIS version detected:
-
This version of Gdal Tools requires at least QGIS version 1.0.0
Plugin will not be enabled.
-
Projections
-
Warp (Reproject)
-
Warp an image into a new coordinate system
@@ -3190,35 +3165,35 @@ Plugin will not be enabled.
Extract projection
-
Extract projection information from raster(s)
-
Conversion
- Umbreyting
+
Rasterize (Vector to raster)
-
Burns vector geometries into a raster
-
Polygonize (Raster to vector)
-
Produces a polygon feature layer from a raster
-
Translate (Convert format)
-
Converts raster data between different formats
@@ -3226,47 +3201,47 @@ Plugin will not be enabled.
RGB to PCT
-
Convert a 24bit RGB image to 8bit paletted
-
PCT to RGB
-
Convert an 8bit paletted image to 24bit RGB
-
Extraction
-
Contour
-
Builds vector contour lines from a DEM
-
Clipper
-
Analysis
-
Sieve
-
Removes small raster polygons
-
Near black
@@ -3274,27 +3249,27 @@ Plugin will not be enabled.
Convert nearly black/white borders to exact value
-
Fill nodata
-
Fill raster regions by interpolation from edges
-
Proximity (Raster distance)
-
Produces a raster proximity map
-
Grid (Interpolation)
-
Create raster from the scattered data
@@ -3302,23 +3277,23 @@ Plugin will not be enabled.
DEM (Terrain models)
-
Tool to analyze and visualize DEMs
-
Miscellaneous
-
Build Virtual Raster (Catalog)
-
Builds a VRT from a list of datasets
-
Merge
@@ -3326,7 +3301,7 @@ Plugin will not be enabled.
Build a quick mosaic from a set of images
-
Information
@@ -3338,7 +3313,7 @@ Plugin will not be enabled.
Build overviews (Pyramids)
-
Builds or rebuilds overview images
@@ -3346,11 +3321,11 @@ Plugin will not be enabled.
Tile index
-
Build a shapefile as a raster tileindex
-
GdalTools settings
@@ -3358,7 +3333,7 @@ Plugin will not be enabled.
Various settings for Gdal Tools
-
@@ -3383,9 +3358,9 @@ Plugin will not be enabled.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
-
No input files to process.
-
The following files were not created:
{0}
-
@@ -3454,7 +3429,7 @@ Do you want terminate it anyway?
%s not created.
-
@@ -3473,38 +3448,38 @@ Do you want terminate it anyway?
Edit
- Breyta
+
Reset
- Endursetja
+
Extract projection
-
Batch mode (for processing whole directory)
-
&Input file
-
Recurse subdirectories
-
Create also prj file
-
Select the file for DEM
@@ -3548,11 +3523,11 @@ Do you want terminate it anyway?
Output size or resolution required
-
The output file doesn't exist. You must set up the output size or resolution to create it.
-
Select the input file for Translate
@@ -3572,23 +3547,23 @@ Do you want terminate it anyway?
Translate - prjwin
-
Image coordinates (geographic) must be numbers.
-
Select the input directory with raster files
-
Select where to save the TileIndex output
-
Convert paletted image to RGB
-
Select the input file for convert
@@ -3596,7 +3571,7 @@ Do you want terminate it anyway?
Select the input directory with files for convert
-
Select the file to analyse
@@ -3604,7 +3579,7 @@ Do you want terminate it anyway?
Select the input directory with files to Assign projection
-
Copy
@@ -3616,27 +3591,27 @@ Do you want terminate it anyway?
Select the input file for Polygonize
-
Select the files for VRT
-
Select where to save the VRT
-
VRT (*.vrt)
-
Select the input directory with files for VRT
-
Select the input file for Near Black
-
Select the input file
@@ -3676,27 +3651,27 @@ Gerðu "Nota skörunar kortvídd" valkostinn óvirkan til að fá ekki
Select the input directory with files to Merge
-
{0} not created.
-
Select the files to analyse
-
Select the input file for Contour
-
Select where to save the Contour output
-
Select the input file for Proximity
-
Warning
@@ -3704,15 +3679,15 @@ Gerðu "Nota skörunar kortvídd" valkostinn óvirkan til að fá ekki
Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
-
Finished
- Lokið
+
Processing completed.
- Vinnslu lokið.
+
Assign projection
@@ -3724,7 +3699,7 @@ Gerðu "Nota skörunar kortvídd" valkostinn óvirkan til að fá ekki
Select where to save the Polygonize output
-
@@ -3732,7 +3707,7 @@ Gerðu "Nota skörunar kortvídd" valkostinn óvirkan til að fá ekki
Select the extent by drag on canvas
-
Path to the GDAL executables
-
Path to the GDAL python modules
-
GDAL help path
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to python modules.
-
Useful to open local GDAL documentation instead of online help
when pressing on the tool dialog's Help button.
-
Select directory with GDAL executables
@@ -3864,11 +3839,11 @@ when pressing on the tool dialog's Help button.
Select directory with GDAL python modules
-
Select directory with the GDAL documentation
-
@@ -3876,18 +3851,18 @@ when pressing on the tool dialog's Help button.
Build Virtual Raster (Catalog)
-
Use visible raster layers for input
-
Choose input directory instead of files
-
Recurse subdirectories
-
&Source No Data
-
Se¶te
-
Allow projection difference
-
Clipper
-
&No data value
-
&Input file (raster)
-
Clipping mode
-
Mask layer
-
Create an output alpha band
-
Contour
-
&Output file for contour lines (vector)
-
I&nterval between contour lines
-
&Attribute name
-
If not provided, no elevation attribute is attached.
-
ELEV
-
Convert RGB image to paletted
-
Batch mode (for processing whole directory)
-
&Input file
-
Number of colors
-
Band to convert
-
DEM (Terrain models)
-
&Input file (DEM raster)
-
&Band
-
Compute &edges
-
Use Zevenbergen&&Thorne formula (instead of the Horn's one)
-
&Mode
-
Hillshade
-
Color relief
-
TRI (Terrain Ruggedness Index)
-
TPI (Topographic Position Index)
-
Roughness
-
Z factor (vertical exaggeration)
-
Scale (ratio of vert. units to horiz.)
-
Azimuth of the light
-
Slope expressed as percent (instead of as degrees)
-
Return trigonometric angle (instead of azimuth)
-
Return 0 for flat (instead of -9999)
-
Color configuration file
-
Matching mode
-
Exact color (otherwise "0,0,0,0" RGBA)
-
Nearest color
-
Add alpha channel
-
Fill Nodata
-
&Input Layer
-
Search distance
-
Smooth iterations
-
Band to operate on
-
Validity mask
-
Do not use the default validity mask
-
Grid (Interpolation)
-
&Z Field
-
&Algorithm
-
Inverse distance to a power
-
Moving average
-
Nearest neighbor
-
Data metrics
-
Power
-
Smoothing
-
Radius1
-
Radius2
-
Min points
-
No data
-
Metrics
-
Range
-
Resize
-
Info
-
Raster info
-
Suppress GCP printing
-
Suppress metadata printing
-
Layer stack
-
Grab pseudocolor table from the first image
-
Near Black
-
How &far from black (or white)
-
Search for nearly &white (255) pixels instead of black ones
-
Build overviews (Pyramids)
-
Remove all overviews.
-
Clean
-
Polygonize (Raster to vector)
-
&Output file for polygons (shapefile)
-
&Field name
-
DN
-
Use mask
-
Desired SRS
-
Output will be:
- new GeoTiff if input file is not GeoTiff
- overwritten if input is GeoTiff
-
Proximity (Raster distance)
-
&Values
-
&Dist units
-
GEO
-
PIXEL
-
&No data
-
&Fixed buf val
-
Rasterize (Vector to raster)
-
&Attribute field
-
&Output file for rasterized vectors (raster)
-
Keep existing raster size and resolution
-
Raster size in pixels
-
Raster resolution in map units per pixel
-
Horizontal
- Lárétt
+
Vertical
- Lóðrétt
+
Sieve
-
&Threshold
-
&Pixel connections
-
Raster tile index
-
Input directory
- Ílagsmappa
+
Tile index field
-
location
-
Write absolute path
-
Skip files with different projection ref
-
Translate (Convert format)
-
Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
-
Outsize
-
Assign a specified nodata value to output bands.
-
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
-
Expand
-
Gray
-
RGB
-
RGBA
-
Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
-
Srcwin
-
Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
-
Prjwin
-
Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
-
Sds
-
Warp (Reproject)
-
&Source SRS
-
&Resampling method
-
Near
-
Bilinear
-
Cubic
-
Cubic spline
-
Lanczos
-
No data values
-
&Memory used for caching
-
MB
-
Use m&ultithreaded warping implementation
-
&Output directory for contour lines (shapefile)
-
@@ -4823,7 +4798,7 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Please specify output shapefile
-
Please specify valid tolerance value
@@ -4831,11 +4806,11 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Please specify valid UID field
-
Singleparts to multipart
-
Output shapefile
@@ -4843,27 +4818,27 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Multipart to singleparts
-
Extract nodes
-
Polygons to lines
-
Input polygon vector layer
- Ílags flákalag
+
Export/Add geometry columns
-
Input vector layer
- Ílags vigurlag
+
Layer CRS
@@ -4871,43 +4846,43 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Project CRS
-
Ellipsoid
-
Polygon centroids
-
Output point shapefile
- Frálags punktashapeskrá
+
Delaunay triangulation
-
Input point vector layer
- Ílags punktavigurlag
+
Voronoi polygon
-
Buffer region
-
Lines to polygons
-
Input line vector layer
- Ílags línuvigurlag
+
Polygon from layer extent
@@ -4919,15 +4894,15 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Output polygon shapefile
-
Unable to delete existing shapefile.
-
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
Cancel
@@ -4941,32 +4916,32 @@ Vinsamlegast veldu hærra þolvik...
Unable to delete incomplete shapefile.
-
At least two features must have same attribute value!
Please choose another field...
-
One or more features in the output layer may have invalid geometry, please check using the check validity tool
-
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Layer '{0}' updated
-
Error writing output shapefile.
@@ -4977,11 +4952,11 @@ Please choose another field...
GeoprocessingDialog
Dissolve all
-
Geoprocessing
- Landgagnavinnsla
+
Please specify an input layer
@@ -4989,79 +4964,79 @@ Please choose another field...
Please specify a difference/intersect/union layer
-
Please specify valid buffer value
-
Please specify dissolve field
-
Please specify output shapefile
-
No features selected, please uncheck 'Use selected' or make a selection
-
Buffer(s)
-
Create single minimum convex hull
-
Create convex hulls based on input field
-
Convex hull(s)
-
Dissolve
-
Difference layer
-
Difference
-
Intersect layer
- Skörunar lag
+
Intersect
-
Clip layer
-
Clip
-
Union layer
-
Union
-
Unable to delete existing shapefile.
-
Cancel
@@ -5074,18 +5049,18 @@ Please choose another field...
No output created. File creation error:
%s
-
Created output shapefile:
%s
%s%s
-
Error loading output shapefile:
%s
-
@@ -5094,34 +5069,34 @@ Warnings:
Symmetrical difference
-
Some output geometries may be missing or invalid.
Would you like to add the new layer anyway?
-
Input CRS error: Different input coordinate reference systems detected, results may not be as expected.
-
Input CRS error: One or more input layers missing coordinate reference information, results may not be as expected.
-
Feature geometry error: One or more output features ignored due to invalid geometry.
-
GEOS geoprocessing error: One or more input features have invalid geometry.
-
@@ -5129,7 +5104,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Launch Globe
-
Unload Globe
-
Overlay data on a 3D globe
-
Unload globe
-
&Globe
-
@@ -5172,58 +5147,58 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Heatmap
-
Creates a heatmap raster for the input point vector.
-
&Heatmap
-
GDAL driver error
-
Cannot open the driver for the specified format
-
Raster update error
-
Could not open the created raster for updating. The heatmap was not generated.
-
Creating heatmap
-
Abort
- Hætta við
+
Heatmap generation aborted
-
QGIS will now load the partially-computed raster.
-
@@ -5231,12 +5206,12 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Save Heatmap as:
-
No valid layers found!
-
Invalid output filename
-
Please enter a valid output file path and name.
-
Layer not found
-
Layer %1 not found.
-
@@ -5269,7 +5244,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Heatmap Plugin
-
Input point layer
- Ílags punktalag
+
Output raster
-
Output format
- Úttakssnið
+
Radius
-
10
- 10
+
meters
-
map units
- mælieining korts
+
Rows
- Raðir
+
Cell size X
-
Columns
- Dálkar
+
Cell size Y
-
Use radius from field
-
Use weight from field
-
0.0
- 0.0
+
Decay ratio
-
Quartic (biweight)
-
Triangular
-
Uniform
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
Advanced
- Meira
+
HelpEditionDialog
Outputs
-
@@ -5413,7 +5388,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Confirmation
-
Are you sure you want to clear log?
@@ -5421,7 +5396,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Create test
-
@@ -5429,24 +5404,24 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Dialog
- Valmynd
+
Reload
-
Save
- Vista
+
InfoViewer
DB Manager
-
@@ -5454,23 +5429,23 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Form
- Form
+
Symbol layer type
-
This layer doesn't have any editable properties
-
MainWindow
- &Edit
&Breyta
@@ -5490,1285 +5465,1285 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Velja
- Measure
Mæla
- &Decorations
-
- &Layer
&Lög
- New
Nýtt
- &Plugins
&Viðbætur
- &Help
&Hjálp
- &Settings
&Stillingar
- &Raster
&Rasti
- Vect&or
-
- &OpenStreetMap
-
- File
Skrá
- Manage Layers
Umsjón laga
- Digitizing
Hnitun
- Advanced Digitizing
Ítarleg hnitun
- Map Navigation
-
- Attributes
Eigindir
- Plugins
Viðbætur
- Help
Hjálp
- Raster
Rasti
- Label
Merki
- Vector
- Vigur
+
- Database
- Gagnagrunnur
+
- Web
- Vefur
+
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
-
- Save as Image...
Vista sem mynd...
- &New Print Composer
&Nýjan prentsmið
- Ctrl+P
Ctrl+P
- Composer Manager...
-
P&roject
-
&Open Recent
-
New From Template
-
- Preview Mode
-
- Paste Features as
-
- &New
- &Nýtt
+
- &Open...
-
- &Save
-
- Save &As...
-
- Exit QGIS
-
- Ctrl+Q
-
- &Undo
&Hætta við
- Ctrl+Z
-
- &Redo
&Framkvæma aftur
- Ctrl+Shift+Z
-
- Cut Features
Klippa fitjur
- Ctrl+X
Ctrl+X
- Copy Features
Afrita fitjur
- Ctrl+C
Ctrl+C
- Paste Features
Líma fitjur
- Ctrl+V
-
- Add Feature
-
- Ctrl+.
-
- Move Feature(s)
Flytja fitju(r)
- Reshape Features
Breyta fitju
- Split Features
Skipta fitju
- Split Parts
-
- Delete Selected
Eyða valið
- Add Ring
Bæta við hring
- Add Part
Bæta við hluta
- Simplify Feature
Einfalda fitju
- Delete Ring
Eyða hring
- Delete Part
Eyða hluta
- Merge Selected Features
-
- Merge Attributes of Selected Features
-
- Node Tool
Hnútaverkfæri
- Rotate Point Symbols
Snúa merkjum punkta
- Snapping Options...
Valkostir grips...
- Pan Map
Hliðra korti
- Zoom In
Skruna inn
- Ctrl++
Ctrl++
- Zoom Out
-
- Ctrl+-
-
- Select Single Feature
+
+
+ Select Features by Rectangle
+
+
+ Select Features by Polygon
-
- Select Features by Freehand
-
- Select Features by Radius
-
- Deselect Features from All Layers
-
- Identify Features
Kenna fitju
- Ctrl+Shift+I
-
- Measure Line
Mæla línu
- Ctrl+Shift+M
-
- Measure Area
Mæla flatarmál
- Ctrl+Shift+J
-
- Measure Angle
Mæla horn
- Zoom Full
Skruna í fulla stærð
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Skruna á lag
- Zoom to Selection
Skruna á val
- Ctrl+J
Ctrl+J
- Zoom Last
Skruna til baka
- Zoom Next
Skruna áfram
- Zoom Actual Size
-
- Zoom to Native Pixel Resolution
-
- Map Tips
-
- Show information about a feature when the mouse is hovered over it
-
- New Bookmark...
Nýtt bókamerki...
- Ctrl+B
-
- Show Bookmarks
Sýna bókamerki
- Ctrl+Shift+B
-
- Refresh
Hressa
- Text Annotation
-
- Form Annotation
-
- Move Annotation
-
- Labeling
Merki
- Layer Labeling Options
Merkja valkostir lags
- New Shapefile Layer...
Ný shapeskrár þekja
- Ctrl+Shift+N
-
- New SpatiaLite Layer ...
-
- Ctrl+Shift+A
-
- Raster calculator ...
Rastareiknir...
- Add Vector Layer...
Bæta við vigurþekju...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Bæta við rastaþekju...
- Ctrl+Shift+R
-
- Add PostGIS Layers...
Bæta við PostGISþekju...
- Ctrl+Shift+D
-
- Add SpatiaLite Layer...
Bæta við SpatiaLiteþekju...
- Ctrl+Shift+L
-
- Add MSSQL Spatial Layer...
-
- Add Oracle Spatial Layer...
Bæta við Oracle Spatial þekju...
- Ctrl+Shift+O
-
- Add WMS/WMTS Layer...
-
- Ctrl+Shift+W
-
- Open Attribute Table
-
- Toggle Editing
-
- Toggles the editing state of the current layer
-
- Save for Selected Layer(s)
-
- Save edits to current layer, but continue editing
-
- Save As...
Vista sem...
- Add from Layer Definition File...
-
- Save As Layer Definition File...
-
- Normal
-
- Normal preview mode
-
- Simulate Photocopy (Grayscale)
-
- Simulate photocopy (grayscale)
-
- Simulate Fax (Mono)
-
- Simulate fax (mono)
-
- Simulate Color Blindness (Protanope)
-
- Simulate color blindness (protanope)
-
- Simulate Color Blindness (Deuteranope)
-
- Simulate color blindness (deuteranope)
-
- Set Scale Visibility of Layer(s)
-
- Remove Layer(s)
Fjarlægja lag (lög)
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
-
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
-
- Properties...
Stillingar...
- Query...
Fyrirspurnir...
- Add to Overview
Bæta við yfirlit
- Add All to Overview
Bæta öllu í yfirlitskort
- Remove All from Overview
-
- Show All Layers
Sýna öll lög
- Ctrl+Shift+U
-
- Hide All Layers
Fela öll lög
- Ctrl+Shift+H
-
- Manage and Install Plugins...
-
- Open Field Calculator
-
- Add Delimited Text Layer...
-
- Add Delimited Text Layer
-
- New Vector Layer
- Nýtt vigurlag
+
- Paste features in clipboard into a new OGR vector layer.
-
- New Memory Vector Layer
-
- Paste features in clipboard into a new memory vector layer.
-
- Toggle Full Screen Mode
-
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
- F5
+
- Ctrl+F
-
- F11
- F11
+
- Project Properties...
Stillingar verks...
- Ctrl+Shift+P
-
- Options...
Valkostir...
- Custom CRS...
-
- Configure shortcuts...
Skilgreina skammval...
- Local Histogram Stretch
-
- Stretch histogram of active raster to view extents
Strekkja stöplarit virks rasta í umfang sjónarhorns
- Help Contents
Hjálp Efnisyfirlit
- F1
- F1
+
- API documentation
-
- QGIS Home Page
Heimasíða QGIS
- Ctrl+H
-
- Check QGIS Version
-
- Check if your QGIS version is up to date (requires internet access)
Athuga hvort QGIS útgáfa sé sú nýjasta (þarfnast internet aðgangs)
- About
Um forritið
- QGIS Sponsors
- QGIS Styrkendur
+
- Move Label
Færa merki
- Rotate Label
Snúa merki
- Rotate Label
Ctl (Cmd) increments by 15 deg.
-
- Change Label
-
- Style Manager...
-
- Python Console
Python skjár
- Full histogram stretch
-
- Stretch Histogram to Full Dataset
-
- Customization...
-
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
-
- Ctrl+M
-
- Embed Layers and Groups...
-
- Embed layers and groups from other project files
-
- &Copyright Label
-
- Creates a copyright label that is displayed on the map canvas.
-
- &North Arrow
-
- "Creates a north arrow that is displayed on the map canvas"
-
- &Scale Bar
-
- Creates a scale bar that is displayed on the map canvas
-
- Add WFS Layer...
-
- Add WFS Layer
-
- Feature Action
-
- Run Feature Action
-
- Pan Map to Selection
-
- Touch zoom and pan
-
- Offset Curve
-
- Copy style
-
- Paste style
-
- Add WCS Layer...
-
- &Grid
-
- Grid
-
- Pin/Unpin Labels
-
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
Acts on all editable layers
-
- Highlight Pinned Labels
-
- New Blank Project
-
- Local Cumulative Cut Stretch
-
- Local cumulative cut stretch using current extent, default limits and estimated values.
-
- Full Dataset Cumulative Cut Stretch
-
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
-
- Show/Hide Labels
-
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
Acts on currently active editable layer
-
- Html Annotation
-
- Duplicate Layer(s)
-
- SVG annotation
-
- Save for All Layers
-
- Rollback for All Layers
-
- Cancel for All Layers
Hætta við fyrir öll lög
- Rollback for Selected Layer(s)
-
- Current Edits
-
- Cancel for Selected Layer(s)
Hætta við fyrir valið lag (eða lög)
- Save Layer Edits
-
-
- Rotate Feature(s)
-
-
- &Download data
-
+ &Import topology from XML
- Rotate Feature(s)
+
&Download data
+
+
+ &Import topology from XML
+
+
+ &Export topology to SpatiaLite
-
- Increase brightness
-
- Decrease brightness
-
- Increase contrast
-
- Decrease contrast
-
- Select By Expression
-
- Select features using an expression
-
- Need commercial support?
-
- DXF Export...
-
- Fill Ring
-
@@ -6776,76 +6751,76 @@ Acts on currently active editable layer
Manage connections
- Stjórna tengingum
+
Save to file
-
Browse
- Fletta
+
Load from file
-
Load
- Lesa inn
+
Save
- Vista
+
eXtensible Markup Language (*.xml *.XML)
-
Save connections
- Vista tengingar
+
Load connections
-
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
-
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -6853,384 +6828,379 @@ Acts on currently active editable layer
MetaSearch
-
Search
- Leita
+
Find
-
Set global
-
Map extent
-
-180
-
90
- 90
+
Records
-
-90
-
180
- 180
+
From
-
Keywords
-
Results
-
>
- >
+
<<
-
Add WCS
-
Add WMS/WMTS
-
<
- <
+
Add WFS
-
Abstract
- Útdráttur
+
Double click to see full record information
-
Type
- Tegund
+
Title
- Titill
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
- Nýtt
+
Edit
- Breyta
+
Delete
- Eyða
+
Save
- Vista
+
Add default services
-
Load
- Lesa inn
+
Settings
- Stillingar
+
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
- Les inn tengingar
+
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
ModelerDialog
Search...
- Leitar...
+
Message
-
There are unsaved changes in model. Close modeler without saving?
-
Empty model
-
Save Model As Image
-
PNG files (*.png *.PNG)
-
Warning
- Viðvörun
+
Please enter group and model names before saving
-
Save Model
-
Processing models (*.model)
-
I/O error
-
Unable to save edits. Reason:
%s
-
Can't save model
-
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
-
Model was correctly saved.
-
Open Model
@@ -7238,18 +7208,23 @@ See the log for more information.
Could not open model
-
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
- Breytur
+
MultipleInputDialog
Select all
- Velja allt
+
Clear selection
@@ -7257,7 +7232,7 @@ See the log for more information.
Toggle selection
-
@@ -7265,107 +7240,107 @@ See the log for more information.
Create a new Catalogue connection
-
Name
- Nafn
+
URL
- URL
+
Save connection
- Vista tengingu
+
Both Name and URL must be provided
-
Overwrite %s?
-
NotSupportedDbType
%s is not supported yet
-
NumberInputDialog
[Enter your formula here]
-
Values from data layers extents
-
Min X
-
Max X
-
Min Y
-
Max Y
-
Cellsize
-
Values from raster layers statistics
-
Mean
- Meðaltal
+
Std. deviation
-
Max value
-
Min value
-
Values from QGIS map canvas
-
Current extent
- Núverandi kortvídd
+
Full extent of all layers in map canvas
-
Wrong expression
-
The expression entered is not correct
-
@@ -7410,97 +7385,97 @@ See the log for more information.
OutputSelectionPanel
[Save to temporary file]
-
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
- Vista skrá
+
Select directory
-
PGDatabase
&Table
-
Run &Vacuum Analyze
-
Sorry
-
Select a TABLE for vacuum analyze.
-
PGTable
Table rule
-
PointsInPolygonThread
point count field
-
PostGisDBPlugin
There is no defined database connection "%s".
-
PrepareAPIDialog
Error
- Villa
+
Done
- Lokið
+
Processing
Processing
-
Toolbox
-
Graphical modeler
-
History and log
-
Options and configuration
@@ -7508,11 +7483,11 @@ See the log for more information.
&Results viewer
-
&Commander
-
@@ -7520,39 +7495,39 @@ See the log for more information.
Processing Toolbox
-
Enter algorithm name to filter list
-
Search...
- Leitar...
+
Execute
-
Execute as batch process
-
Edit rendering styles for outputs
-
Recently used algorithms
-
Python
Python warning
-
An error has occured while executing Python code:
@@ -7576,23 +7551,23 @@ See the log for more information.
Couldn't load plugin '%s' from ['%s']
-
Couldn't load plugin %s
-
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
-
Error while unloading plugin %s
-
@@ -7607,83 +7582,83 @@ See the log for more information.
Compile APIs
-
Saving prepared file...
-
Saved
-
Done
- Lokið
+
Error preparing file...
-
Hide Editor
-
Check Syntax
-
Run selected
-
Run Script
-
Undo
- Afturkalla
+
Redo
- Endurgera
+
Find Text
-
Cut
-
Copy
- Afrita
+
Paste
-
Comment
- Athugasemd
+
Uncomment
-
Share on codepad
-
Hide/Show Object Inspector
-
Select All
- Velja allt
+
Settings
@@ -7691,11 +7666,11 @@ See the log for more information.
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
-
Connection error:
@@ -7703,189 +7678,189 @@ See the log for more information.
[Temporary file saved in {0}]
-
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
-
You have to save the file before running it.
-
Python Console: Save file
-
Script was correctly saved.
-
Click on button to restore all tabs from last session.
-
Restore tabs
-
Close
- Loka
+
List all tabs
-
New Editor
-
Close Tab
-
Close All
-
Close Others
-
Save As
-
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
-
The file <b>'{0}'</b> has been modified, save changes?
-
Unable to restore the file:
{0}
-
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
-
Show Editor
-
Enter Selected
-
Object Inspector
-
Open file
- Opna skrá
+
Save
- Vista
+
Save As...
- Vista sem...
+
Run script
-
Show editor
-
Import Class
-
Import Processing class
-
Enter text to find...
-
Find Next
-
Find Previous
-
Case Sensitive
-
Whole Word
-
Wrap Around
-
Open File
- Opna skrá
+
Save Error
-
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
-
History saved successfully.
-
Session and file history cleared successfully.
@@ -7897,11 +7872,11 @@ See the log for more information.
Command History
-
Show
-
Clear File
@@ -7913,47 +7888,47 @@ See the log for more information.
Python Console - Command History
-
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
-
Import PyQt.QtGui class
-
Run command
-
Help
- Hjálp
+
@@ -7961,12 +7936,12 @@ See the log for more information.
meters
-
feet
-
degrees
-
<unknown>
-
nautical miles
-
@@ -7993,27 +7968,27 @@ See the log for more information.
Unable to initialize
QOCISpatialDriver
-
Unable to logon
-
Unable to begin transaction
-
Unable to commit transaction
-
Unable to rollback transaction
-
@@ -8023,12 +7998,12 @@ See the log for more information.
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to alloc statement
-
Unable to prepare statement
-
Unable to get statement type
-
Unable to bind value
-
Unable to execute statement
-
@@ -8077,49 +8052,49 @@ See the log for more information.
Building triangulation...
-
Estimating normal derivatives...
-
- minidump written to %1
-
- writing of minidump to %1 failed (%2)
-
- creation of minidump to %1 failed (%2)
-
- Crash dumped
-
QGIS starting in non-interactive mode not supported.
You are seeing this message most likely because you have no DISPLAY environment variable set.
-
Deleted vertices
-
Moved vertices
-
To select features, choose a vector layer in the legend
-
CRS Exception
-
Selection extends beyond layer's coordinate system.
-
Python is not enabled in QGIS.
-
Plugins
- Viðbætur
+
Plugin "%1" is not compatible with this version of QGIS.
It will be disabled.
-
Loaded %1 (package: %2)
-
Library name is %1
-
Failed to load %1 (Reason: %2)
-
Attempting to resolve the classFactory function
-
Loaded %1 (Path: %2)
-
There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
%1.
-
Unable to find the class factory for %1.
-
Plugin %1 did not return a valid type and cannot be loaded
-
Could not open CRS database %1
Error(%2): %3
-
CRS
-
Generated CRS
A CRS automatically generated from layer info get this prefix for description
-
Saved user CRS [%1]
-
Imported from GDAL
-
Can't open database: %1
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate line length.
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
-
m²
-
km²
-
ha
-
sq ft
-
acres
-
sq mile
-
sq. NM
-
NM
-
sq.deg.
-
Cannot convert '%1' to double
-
Cannot convert '%1' to int
-
Cannot convert '%1' to DateTime
-
Cannot convert '%1' to Date
-
Cannot convert '%1' to Time
-
Cannot convert '%1' to Interval
-
- Cannot convert '%1' to boolean
-
- Domain max must be greater than domain min
-
- Exponent must be greater than 0
-
- Invalid regular expression '%1': %2
-
- Index is out of range
-
- Cannot convert '%1:%2:%3' to color
-
- Cannot convert '%1:%2:%3:%4' to color
-
- "%1" is not a valid color ramp
-
- Cannot convert '%1:%2:%3:%4:%5' to color
-
- function help for %1 missing
-
- Operators
-
- Fields and Values
-
- Math
-
- Conversions
-
- Conditionals
-
second|seconds
list of words separated by | which reference years
-
minute|minutes
list of words separated by | which reference minutes
-
hour|hours
list of words separated by | which reference minutes hours
-
day|days
list of words separated by | which reference days
-
week|weeks
wordlist separated by | which reference weeks
-
month|months
list of words separated by | which reference months
-
year|years
list of words separated by | which reference years
-
- Date and Time
-
- String
-
- Color
- Litur
+
- Geometry
- Rúmfræði
+
- Record
-
- No root node! Parsing failed?
-
- (no root)
-
- Unary minus only for numeric values.
-
- Can't preform /, *, or % on DateTime and Interval
-
- [unsupported type;%1; value:%2]
-
- Column '%1' not found
-
Exception: %1
-
GEOS
-
GEOS prior to 3.2 doesn't support GEOSInterpolate
-
segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
-
ring %1 with less than four points
-
ring %1 not closed
-
line %1 with less than two points
-
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
-
+
segments %1 and %2 of line %3 intersect at %4
-
ring %1 of polygon %2 not in exterior ring
-
GEOS error:could not produce geometry for GEOS (check log window)
-
GEOS error:%1
-
polygon %1 has no rings
-
polygon %1 inside polygon %2
-
Unknown geometry type
-
Unknown geometry type %1
-
Geometry validation was aborted.
-
Geometry has %1 errors.
-
Geometry is valid.
-
invalid line
-
Console
-
infinite
-
No QGIS data provider plugins found in:
%1
-
No vector layers can be loaded. Check your QGIS installation
-
No Data Providers
-
No data provider plugins are available. No vector layers can be loaded
-
Unable to instantiate the data provider plugin %1
-
Failed to load %1: %2
-
OGR driver for '%1' not found (OGR error: %2)
-
trimming attribute name '%1' to ten significant characters produces duplicate column name.
-
creation of data source failed (OGR error:%1)
-
creation of layer failed (OGR error:%1)
-
unsupported type for field %1
-
creation of field %1 failed (OGR error: %2)
-
created field %1 not found (OGR error: %2)
-
Invalid variant type for field %1[%2]: received %3 with type %4
-
OGR
-
no available replacement for internal fieldname ogc_fid found
-
Reserved attribute name ogc_fid replaced with %1
-
By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
Feature geometry not imported (OGR error: %1)
-
Feature creation error (OGR error: %1)
-
Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
-
Feature write errors:
-
Stopping after %1 errors
-
Only %1 of %2 features written.
-
Arc/Info ASCII Coverage
-
Atlas BNA
-
Comma Separated Value
-
ESRI Shapefile
- ESRI Shapefile
+
DBF file
-
FMEObjects Gateway
-
New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
Limit the number of coordinate pairs per line in multiline format.
-
Set the number of decimal for coordinates. Default value is 10.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
DBF File
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
GeoJSON
-
whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
GeoRSS
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
If not specified, GML2 will be used.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
Geography Markup Language [GML]
-
Generic Mapping Tools [GMT]
-
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
INTERLIS 1
-
INTERLIS 2
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Keyhole Markup Language [KML]
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Mapinfo TAB
-
Mapinfo MIF
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Microstation DGN
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
S-57 Base file
-
Spatial Data Transfer Standard [SDTS]
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
SQLite
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
SpatiaLite
-
AutoCAD DXF
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
Geoconcept
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
ESRI FileGDB
-
Failed to transform, writing stopped. (Exception: %1)
-
Unable to load %1 provider
-
Provider %1 has no %2 method
-
Loaded from Provider
-
Loading of layer failed
-
Creation error for features from #%1 to #%2. Provider errors was:
%3
-
Vector import
-
Only %1 of %2 features written.
-
Reading raster part %1 of %2
-
Building Pyramids...
-
Building pyramids failed - write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Multiband color
-
Paletted
-
Singleband gray
-
Singleband pseudocolor
-
Singleband color data
-
All Ramps
-
Categorized
-
Graduated
-
Rule-based
-
Point displacement
-
Inverted polygons
-
Simple line
-
Marker line
-
Simple marker
-
SVG marker
-
Font marker
-
Ellipse marker
-
Vector Field marker
-
Simple fill
-
Gradient fill
-
Shapeburst fill
-
SVG fill
-
Centroid fill
-
Line pattern fill
-
Point pattern fill
-
Where is '%1' (original location: %2)?
-
QGIS rocks!
-
<html>QGIS rocks!</html>
-
Raster Histogram
-
Shows a QtSensors compass reading
-
Capture mouse coordinates in different CRS
-
Version 0.1
@@ -9797,18 +9771,19 @@ Only %1 of %2 features written.
Layers
Lag
Dxf2Shp Converter
-
Converts from dxf to shp file format
-
An event visualization tool - view images associated with vector features
-
Georeferencer GDAL
-
Georeferencing rasters using GDAL
-
Raster
- Rasti
+
Could not reproject view extent: %1
-
Could not reproject layer extent: %1
-
Version 3.1.9
- Útgáfa 3.1.9
+
Fit to a linear transform requires at least 2 points.
-
Fit to a Helmert transform requires at least 2 points.
-
Fit to an affine transform requires at least 4 points.
-
Fitting a projective transform requires at least 4 corresponding points.
-
Globe
-
Overlay data on a 3D globe
-
Location: %1<br>Mapset: %2
-
Categories
-
Boundaries
-
Centroids
-
Faces
-
Kernels
-
Areas
-
Islands
-
History<br>
-
<b>Layer</b>
-
<b>Region</b>
-
Cannot open region header
-
XY
-
UTM
-
SP
-
LL
-
Other
-
Projection Type
-
Zone
-
3D Cols
-
3D Rows
-
Depths
-
E-W 3D resolution
-
N-S 3D resolution
-
GRASS
- GRASS
+
Heatmap
-
Creates a Heatmap raster for the input point vector
-
A plugin for interpolation based on vertices of a vector layer
-
Version 0.001
- Útgáfa 0.001
+
OfflineEditing
-
Allow offline editing and synchronizing with database
-
Oracle Spatial GeoRaster
-
Access Oracle Spatial GeoRaster
-
A plugin for raster based terrain analysis
-
Road graph plugin
-
It solves the shortest path problem.
-
Processing 1/2 - %p%
-
Processing 2/2 - %p%
-
Intersects
-
Is disjoint
-
Touches
-
Within
-
Contains
-
Equals
-
Overlaps
-
Spatial Query Plugin
-
A plugin that makes spatial queries on vector layers
-
SPIT
-
Shapefile to PostgreSQL/PostGIS Import Tool
-
+
+ SQL Anywhere plugin
+
+
+ Store vector layers within a SQL Anywhere database
+
Zonal statistics plugin
-
A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
-
Cannot open GDAL MEM dataset %1: %2
-
Cannot GDALCreateGenImgProjTransformer:
-
Cannot inittialize GDALWarpOperation :
-
Cannot ChunkAndWarpImage: %1
-
GDAL/OGR VSIFileHandler
-
This raster file has no bands and is invalid as a raster layer.
-
Cannot get GDAL raster band: %1
-
Nearest Neighbour
-
Average
- Meðal
+
Gauss
-
Cubic
-
Mode
- Hamur
+
None
- Ekkert
+
Couldn't open the data source: %1
-
Parse error at line %1 : %2
-
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
-
Choose GRASS installation path (GISBASE)
-
GRASS data won't be available if GISBASE is not specified.
-
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
GISBASE is not set.
-
%1 is not a GRASS mapset.
-
Cannot start %1/etc/lock
-
Mapset is already in use.
-
Temporary directory %1 exists but is not writable
-
Cannot create temporary directory %1
-
Cannot create %1
-
Cannot remove mapset lock: %1
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
- Get ekki opnað vigur %1 í kortasafni %2
+
Cannot read raster map region
-
Cannot read vector map region
-
Cannot read region
-
Cannot open GISRC file
-
Cannot start module
-
command: %1 %2
-
Cannot run module
-
command: %1 %2<br>%3<br>%4
-
Cannot get projection
-
Cannot get map info
-
Cannot get colors
-
Cannot query raster
-
Cannot draw raster
-
Loading of the MSSQL provider failed
-
Unsupported type for field %1
-
Creation of fields failed
-
OGR[%1] error %2: %3
-
Unable to get driver %1
-
Arc/Info Binary Coverage
-
DODS
-
OpenFileGDB
-
ESRI Personal GeoDatabase
-
ESRI ArcSDE
-
ESRI Shapefiles
-
GeoPackage
-
Grass Vector
-
Informix DataBlade
-
Ingres
-
Mapinfo File
-
MySQL
-
MSSQL
-
Oracle Spatial
-
ODBC
-
OGDI Vectors
-
PostgreSQL
-
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
UK. NTF2
-
U.S. Census TIGER/Line
-
VRT - Virtual Datasource
-
X-Plane/Flightgear
-
All files
- Allar skrár
+
Duplicate field (10 significant characters): %1
-
Creating the data source %1 failed: %2
-
Unknown vector type of %1
-
Creation of OGR data source %1 failed: %2
-
field %1 with unsupported type %2 skipped
-
creation of field %1 failed
-
Couldn't create file %1.qpj
-
-
- Fetching features failed.
-SQL:%1
-Error: %2
-
Fetching features failed.
+SQL:%1
+Error: %2
+
+
+ Oracle
-
Connection to database failed
-
No owner name found
-
Creation of data source %1 failed:
%2
-
Loading of the layer %1 failed
-
Field name clash found (%1 not remappable)
-
%1 not owner of the table %2.
-
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Unable to delete layer %1.%2:
%3
-
Unable to clean metadata %1.%2:
%3
-
no result buffer
-
Fetching from cursor %1 failed
Database error: %2
-
PostGIS
-
Infinite filter rectangle specified
-
Unable to delete layer %1:
%2
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
Save style in database
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
SQLite error: %2
SQL: %1
-
SQLite error getting feature: %1
-
creation of data source %1 failed. %2
-
loading of the layer %1 failed
-
creation of fields failed
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
- Gat ekki búið til nýjan gagnagrunn
-
+
Unable to activate FOREIGN_KEY constraints [%1]
-
Unable to delete table %1
-
Unable to delete table %1:
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
The extra plugin path '%1' does not exist !
-
Couldn't load SIP module.
-
Python support will be disabled.
-
Couldn't set SIP API versions.
-
Couldn't load PyQt4.
-
Couldn't load PyQGIS.
-
Couldn't load QGIS utils.
-
An error occured during execution of following code:
-
Undefined
- Óskilgreint
+
Hidden
- Falið
+
Title
- Titill
+
Group
-
Subgroup
-
Symbol
- Tákn
+
Symbol label
-
Topology Checker
-
A Plugin for finding topological errors in vector layers
-
Using fix %1.
-
Topology plugin
-
intersecting geometries
-
features too close
-
point not covered by segment
-
segment too short
-
invalid geometry
-
dangling end
-
duplicate geometry
-
pseudo node
-
overlaps
-
gaps
-
point not covered
-
line ends not covered by point
-
point not in polygon
-
polygon does not contain point
-
multipart feature
-
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Save style to DB (%1)
-
Could not save symbology because:
%1
- Gat ekki vistað táknun vegna:
-%1
+
Attribute index %1 out of bounds [0;%2]
-
Error
- Villa
+
Layer
- Lag
+
Feature ID
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
-
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- Skýringar
+
QSpatiaLiteDriver
- Error opening database
Villa kom upp við opnun gagnagrunn
- Error closing database
Villa kom upp við lokun gagnagrunns
- Unable to begin transaction
-
- Unable to commit transaction
-
- Unable to rollback transaction
-
@@ -11458,37 +11446,37 @@ Response was:
Unable to fetch row
-
No query
-
- Unable to execute statement
-
- Unable to execute multiple statements at a time
-
- Unable to reset statement
-
- Unable to bind parameters
-
- Parameter count mismatch
-
@@ -11501,7 +11489,7 @@ Response was:
Invalid file descriptor (port was not opened correctly)
-
Caught a non-blocked signal (POSIX)
-
Operation timed out (POSIX)
-
The file opened by the port is not a valid device
-
The port detected a break condition
-
The port detected a framing error (usually caused by incorrect baud rate settings)
-
There was an I/O error while communicating with the port
-
Character buffer overrun
-
Receive buffer overflow
-
The port detected a parity error in the received data
-
Transmit buffer overflow
-
General read operation failure
-
General write operation failure
-
Multiple Instances of QgisApp
-
Map canvas. This is where raster and vector layers are displayed when added to the map
-
Browser
-
Browser (2)
-
Log Messages
-
QGIS starting...
-
Checking provider plugins
-
QGIS er tilbúið!
- Minimize
Minnka
- Ctrl+M
Minimize Window
-
- Minimizes the active window to the dock
-
- Zoom
Skruna
- Toggles between a predefined size and the window size set by the user
-
- Bring All to Front
Kalla alla fram
- Bring forward all open windows
Kalla fram alla opna glugga
- Current Edits
-
- Error
Villa
- Failed to open Python console:
Gat ekki opnað Python skjá:
QGIS
-
Multiple instances of QGIS application object detected.
Please contact the developers.
-
QGIS - %1 ('%2')
-
- Panels
Hnappaborð
- Toolbars
Verkfærastikur
- Window
-
- &Database
&Gagnagrunnur
- &Web
-
- Progress bar that displays the status of rendering layers and other time-intensive operations
-
- Toggle extents and mouse position display
-
- Coordinate:
Hnit:
- Current map coordinate
-
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
-
- Current map coordinate (lat,lon or east,north)
-
- Scale
Skali
- Current map scale
-
- Displays the current map scale
-
- Current map scale (formatted as x:y)
-
- Render
Teikna
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
-
- Toggle map rendering
-
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
-
- CRS status - Click to open coordinate reference system dialog
-
- Ready
Tilbúin
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
-
- Overview
Yfirlit
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
-
- Layers
Lög
- Map layer list that displays all layers in drawing order.
Kortalagalisti sem sýnir öll lög í teikni röð
- Layer order
Uppröðun laga
Private qgis.db
-
- < Blank >
-
-
- QGIS version
-
-
- QGIS code revision
-
-
- Compiled against Qt
-
Running against Qt
- QGIS version
+
- Compiled against GDAL/OGR
- QGIS code revision
+
Compiled against Qt
+
+
+ Running against Qt
+
+
+ Compiled against GDAL/OGR
+
+
+ Running against GDAL/OGR
-
- PostgreSQL Client Version
-
- No support.
-
-
- SpatiaLite Version
-
SpatiaLite Version
+
+
+ QWT Version
-
- PROJ.4 Version
-
- QScintilla2 Version
-
- This copy of QGIS writes debugging output.
-
- %1 doesn't have any layers
%1 hefur engin lög
- Invalid Data Source
-
- %1 is not a valid or recognized data source
%1 er ekki gilt eða þekkt gagnaform
- Vector
- Vigur
+
- PostgreSQL
-
- Cannot get PostgreSQL select dialog from provider.
-
- %1 is an invalid layer - not loaded
%1 er ógilt lag - hlóðst ekki
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
- QGIS files
-
- No legend entries selected
-
- Select the layers and groups you want to remove in the legend.
-
- Remove layers and groups
-
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
- Do you want to save the current project? %1
-
- Invalid Layer
Ógilt lag
- SpatiaLite
-
- Cannot get SpatiaLite select dialog from provider.
-
- Delimited Text
-
- Cannot get Delimited Text select dialog from provider.
-
- MSSQL
-
- Cannot get MSSQL select dialog from provider.
-
- Oracle
-
- Cannot get Oracle select dialog from provider.
-
- WMS
-
- Cannot get WMS select dialog from provider.
-
- WCS
-
- Cannot get WCS select dialog from provider.
-
- WFS
-
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
-
- Auto-open Project
-
- Failed to open: %1
-
- Not valid project file: %1
-
- Project failed to open: %1
-
- Default template has been reopened: %1
-
- File not found: %1
-
- Calculating...
Reikna...
- Abort...
Hætta við...
- Choose a QGIS project file to open
-
- Loading project: %1
-
- Unable to open project
-
- Security warning
-
- project macros have been disabled.
-
- Enable macros
-
- Project loaded
-
- Choose a QGIS project file
-
- Saved project to: %1
Vistaði verkefni í: %1
- Unable to save project %1
-
- Choose a file name to save the QGIS project file as
-
- Unable to load %1
-
- Choose a file name to save the map image as
-
- Saved map image to %1
Vistaði kortamynd í %1
- Default system font substituted.
-
- Labeling
- Merki
+
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
-
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
-
Range
-
Unique Values
-
File Name
- Skráarnafn
+
Value Map
-
Enumeration
-
Hidden
- Falið
+
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
-
Web View
-
Color
- Litur
+
Relation Reference
-
Date/Time
-
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
-
- The project file is not writable.
-
- DXF export completed
-
- DXF export failed
-
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
-
- Show more
-
- Labeling Options
Merkja valkostir
- Please select a vector layer first
Vinsamlegast veljið fyrst vigurlag
- Layer labeling settings
Merkja stillingar lags
- Reading raster
-
- Cannot write raster error code: %1
-
- Saving done
Vistun lokið
- Export to vector file has been completed
-
- Save error
Villa við vistun
- Export to vector file failed.
Error: %1
-
- No Layer Selected
Ekkert lag valið
- To delete features, you must select a vector layer in the legend
Til að eyða fitjum verður að velja lag í skýringum
- No Vector Layer Selected
Ekkert vigurlag valið
- Deleting features only works on vector layers
-
- Provider does not support deletion
-
- Data provider does not support deleting features
-
- Layer not editable
Lag er óbreytanlegt
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Núverandi lagi er ekki hægt að breyta. Veldu 'Byrja að breyta' í hnitunartólastikunni.
-
- No Features Selected
-
-
- The current layer has not selected features
-
No Features Selected
+
+
+ The current layer has not selected features
+
+
+ Delete features
Eyða fitjum
- Delete %n feature(s)?
number of features to delete
-
- Eyða %n fitju?
- Eyða %n fitjum?
-
+ Eyða %n fitju? Eyða %n fitjum?
- Features deleted
Fitjum eytt
- Problem deleting features
Vandamál við að eyða fitjum
- A problem occured during deletion of features
-
- %n feature(s) deleted.
number of features deleted
-
-
+
- Merging features...
Sameina fitjur...
- Abort
Hætta við
- Create unique print composer title
-
- (title generated if left empty)
-
- Composer title
-
- Title can not be empty!
-
- Title already exists!
-
- Composer %1
-
- copy
-
- No active layer
Ekkert virkt lag
- No active layer found. Please select a layer in the layer list
Ekkert virkt lag fannst. Veljið lag í listanum
- Active layer is not vector
Virkt lag er ekki Vigrað
-
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
-
Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
+
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
+
+
+ Not enough features selected
Ekki nógu margar fitjur valdar
- The merge tool requires at least two selected features
-
- Merged feature attributes
Sameinaði eigindir fitja
- Merge failed
Sameining mistókst
- An error occured during the merge operation
Villa átti sér stað við sameiningaraðgerð
- Union operation canceled
Hætt við sameiningar virki
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
Sameiningar virkir skilaði niðurstöðum í rúmfræðitegund um að hann væri ekki samhæfur núverandi lagi og var því stöðvaður
- Merged features
Sameinaði fitjur
- No active vector layer
- Ekkert virkt vigurlag
+
- To select features, choose a vector layer in the legend
-
- Features cut
-
- Features pasted
-
- Paste features
-
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
-
- New memory layer name
-
- Layer name
- Nafn lags
+
- No features in clipboard.
-
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
-
- Cannot create field %1 (%2,%3)
-
- Cannot copy style: %1
-
- Cannot parse style: %1:%2:%3
-
- Cannot read style: %1
Get ekki lesið stíl: %1
- Start editing failed
Það mistókst að hefja breytingar
- Provider cannot be opened for editing
-
- Stop editing
Hætta að breyta
- Do you want to save the changes to layer %1?
-
- Problems during roll back
-
- Could not %1 changes to layer %2
Errors: %3
-
- rollback
-
- cancel
hætta við
- Save
- Vista
+
- all
-
- Rollback
-
- Cancel
Hætta við
- Current edits
-
- %1 current changes for %2 layer(s)?
-
- copy
-
- Plugin layer
-
- Memory layer
-
- Duplicate layer:
-
- %1 (duplication resulted in invalid layer)
-
- Set scale visibility for selected layers
-
-
- Couldn't load Python support library: %1
-
Couldn't load Python support library: %1
+
+
+ Couldn't resolve python support library's instance() symbol.
-
- Python support ENABLED :-)
-
- There is a new version of QGIS available
Það er nýrri útgáfa af QGIS til
- You are running a development version of QGIS
Þú er að nota þróunarútgáfu af QGIS
- You are running the current version of QGIS
Þú ert að nota studda útgáfu af QGIS
- Would you like more information?
Viltu meiri upplýsingar?
- QGIS Version Information
Upplýsingar um útgáfu QGIS
- QGIS - Changes since last release
-
- Unable to get current version information from server
-
- Connection refused - server may be down
Tengingu hafnað - þjónn gæti verið bilaður
- QGIS server was not found
QGIS þjónn fannst ekki
- Unknown network socket error: %1
-
- Unable to communicate with QGIS Version server
%1
-
- To perform a full histogram stretch, you need to have a raster layer selected.
-
- To change brightness or contrast, you need to have a raster layer selected.
-
- en
documentation language
-
- Layer is not valid
Lag er ekki gilt
- The layer %1 is not a valid layer and can not be added to the map
-
- The layer is not a valid layer and can not be added to the map
Lagið er ekki gilt lag og ekki hægt að bæta því við kortið
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
- Save?
Vista?
- Current CRS: %1 (OTFR enabled)
-
- Current CRS: %1 (OTFR disabled)
-
- Map coordinates for the current view extents
-
- Map coordinates at mouse cursor position
-
- Extents:
Kortvídd:
- Maptips require an active layer
-
- %n feature(s) selected on layer %1.
number of selected features
-
-
+
- Open a GDAL Supported Raster Data Source
-
- Error adding valid layer to map canvas
-
- Raster layer
-
- %1 is not a supported raster data source
%1 er ekki myndform með stuðning
- Unsupported Data Source
-
- Exit QGIS
-
- Do you really want to quit QGIS?
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
-
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Stillingar:Eiginleikar:Almennt</tt>
- Warn me when opening a project file saved with an older version of QGIS
Vara mig við þegar verkefni er opnað í eldri útgafu af QGIS
- Project file is older
Verkefnisskrá er eldri
- This project file was saved by an older version of QGIS
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
-
- Warning
Viðvörun
- This layer doesn't have a properties dialog.
-
- Authentication required
Auðkenningar krafist
- Proxy authentication required
-
- SSL errors occured accessing URL %1:
-
-
Always ignore these errors?
-
- %n SSL errors occured
number of errors
-
-
+
@@ -13188,30 +13158,30 @@ Always ignore these errors?
About QGIS
-
License
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
-
QGIS is licensed under the GNU General Public License
-
http://www.gnu.org/licenses
-
Join our user mailing list
-
about:blank
-
What's New
-
Providers
-
Developers
-
Essen (Germany), Developer meeting 2012
-
Contributors
-
Donors
-
<p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
-
Available QGIS Data Provider Plugins
-
Available Qt Database Plugins
-
Available Qt Image Plugins
-
Qt Image Plugin Search Paths <br>
-
@@ -13295,12 +13265,12 @@ p, li { white-space: pre-wrap; }
Warning
- Viðvörun
+
Invalid field name. This field name is reserved and cannot be used.
-
@@ -13342,7 +13312,7 @@ p, li { white-space: pre-wrap; }
Add vector join
-
Target field
-
Create attribute index on join field
-
Cache join layer in virtual memory
-
@@ -13375,7 +13345,7 @@ p, li { white-space: pre-wrap; }
Add tab or group for %1
-
@@ -13383,27 +13353,27 @@ p, li { white-space: pre-wrap; }
Dialog
- Valmynd
+
Create category
-
as
-
a tab
-
a group in container
-
@@ -13416,7 +13386,7 @@ p, li { white-space: pre-wrap; }
Select background color
-
@@ -13444,7 +13414,7 @@ p, li { white-space: pre-wrap; }
Background color
- Litur bakgrunns
+
&Expand All
-
&Collapse All
-
&Remove
- &Fjarlægja
+
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Duplicate
-
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As...
- Vista sem...
+
Save As Layer Definition File...
-
&Filter...
-
&Properties
-
Copy Style
-
Paste Style
-
QgsApplication
- Exception
Frávik
- unknown exception
óþekkt frávik
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13570,65 +13540,65 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
-
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
-
- Migration of private qgis.db failed.
%1
-
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
- Smiður
+
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
@@ -13637,35 +13607,35 @@ User DB Path: %9
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Expression based filename
-
Atlas preview
-
No matching atlas features found!
-
Expression based filter
-
@@ -13673,64 +13643,64 @@ Parser error:
Atlas Generation
-
Generate an atlas
-
Configuration
-
Coverage layer
-
Hidden coverage layer
-
Sort by
-
Sort direction
-
...
- ...
+
Filter with
-
Output
- Úttak
+
Single file export when possible
-
Output filename expression
-
@@ -13744,7 +13714,7 @@ Parser error:
Insert expression
-
Echo attribute's value
-
Run an application
-
Get feature id
-
Selected field's value (Identify features tool)
-
Clicked coordinates (Run feature actions tool)
-
Search on web based on attribute's value
-
@@ -13807,7 +13777,7 @@ Parser error:
This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
-
Capture
-
Remove the selected action
-
Move the selected action up
-
Move the selected action down
-
Add default actions
-
Action properties
-
Generic
-
Captures any output from the action
-
Captures the standard output or error generated by the action and displays it in a dialog box
-
Capture output
-
Enter the name of an action here. The name should be unique (qgis will make it unique if necessary).
-
Enter the action name here
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Enter the action command here
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Browse for action
-
Click to browse for an action
-
Clicking the button will let you select an application to use as the action
-
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
-
Inserts the selected field into the action
-
Insert field
-
Inserts the action into the list above
-
Add to action list
-
Update the selected action
-
Update selected action
-
@@ -13999,7 +13969,7 @@ Parser error:
Feature Attributes
-
@@ -14007,7 +13977,7 @@ Parser error:
Attributes changed
- Eigind breytt
+
@@ -14047,7 +14017,7 @@ Parser error:
Insert NULL value on top
-
@@ -14073,12 +14043,12 @@ Parser error:
Columns
- Dálkar
+
Reset
- Endursetja
+
Delete selected features (DEL)
-
Invert selection (Ctrl+R)
-
Pan map to the selected rows (Ctrl+P)
-
Ctrl+P
- Ctrl+P
+
Toggle editing mode (Ctrl+E)
-
Save Edits (Ctrl+S)
-
Select features using an expression
-
Filter
- Sía
+
Filters the visible features according to the current filter selection and filter string.
-
Apply
-
mMainViewButtonGroup
-
Table View
-
=
- =
+
Update All
-
Advanced Filter (Expression)
-
Use the Expression Builder to define the filter
-
Ctrl+F
-
Show All Features
-
Show Selected Features
-
Show Edited and New Features
-
Show Features Visible On Map
-
The filter defines which features are currently shown in the list or on the table
-
Form View
-
Column Filter
-
Filter all the features which have been edited but not yet saved
-
Open field calculator (Ctrl+I)
-
Attribute table - %1 (%n Feature(s))
feature count
-
- Eigindatafla - %1 (%n fitja)
- Eigindatafla - %1 (%n fitjur)
-
+ Eigindatafla - %1 (%n fitja) Eigindatafla - %1 (%n fitjur)
Parsing error
-
Evaluation error
-
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
-
Update Filtered
-
Error
- Villa
+
An error occured while evaluating the calculation string:
%1
-
Expression based filter
-
The attribute could not be added to the layer
-
The attribute(s) could not be deleted
-
Attribute error
-
Error filtering
-
Geometryless feature added
-
@@ -14422,7 +14389,7 @@ Parser error:
feature id
- Kenni fitju
+
@@ -14430,7 +14397,7 @@ Parser error:
Select All
- Velja allt
+
@@ -14438,17 +14405,17 @@ Parser error:
Edit Widget Properties
-
Editable
-
Label on top
-
@@ -14456,67 +14423,67 @@ Parser error:
Normal
-
Lighten
-
Screen
-
Dodge
-
Addition
- Samlagning
+
Darken
-
Multiply
-
Burn
-
Overlay
-
Soft light
-
Hard light
-
Difference
-
Subtract
-
@@ -14524,7 +14491,7 @@ Parser error:
&Add
- &Bæta við
+
ID
- Kenni
+
Name
- Nafn
+
Project
-
xMin
-
yMin
-
Unable to create the bookmark.
Driver:%1
Database:%2
-
Are you sure you want to delete %n bookmark(s)?
number of rows
-
-
+
WMS
-
Cannot get WMS select dialog from provider.
-
CRS
-
Cannot set layer CRS
-
@@ -14663,78 +14627,78 @@ Database:%2
QGIS Browser
-
Param
-
Metadata
-
Preview
- Forskoðun
+
Stop rendering
-
Attributes
- Eigindir
+
toolBar
-
New Shapefile
-
Ctrl+Shift+N
-
Refresh
- Hressa
+
F5
- F5
+
Set layer CRS
-
Manage WMS
-
Manage WMS Connections
-
Ctrl+Shift+W
-
@@ -14742,12 +14706,12 @@ Database:%2
Dialog
- Valmynd
+
Path
-
@@ -14755,68 +14719,68 @@ Database:%2
Case Sensitive
-
Filter Pattern Syntax
-
Normal
-
Wildcard(s)
-
Regular Expression
-
Add as a favourite
-
Remove favourite
-
Properties
-
Fast scan this dir.
-
Add Layer
-
Add Selected Layers
-
Add a directory
-
Add directory to favourites
-
Layer Properties
- Stillingar lags
+
Directory Properties
-
@@ -14839,39 +14803,39 @@ Database:%2
Browser
-
Refresh
- Hressa
+
Add Selected Layers
-
Add
- Bæta við
+
Filter Files
-
...
- ...
+
Collapse All
-
Filter files
-
@@ -14889,27 +14853,27 @@ Database:%2
Dialog
- Valmynd
+
Display Name
-
Layer Source
-
Provider
-
Metadata
-
@@ -14917,17 +14881,17 @@ Database:%2
Project home
-
Home
-
Favourites
-
@@ -14940,7 +14904,7 @@ Database:%2
No Brush
-
BDiagonal
-
FDiagonal
-
Diagonal X
-
Dense 1
-
Dense 2
-
Dense 3
-
Dense 4
-
Dense 5
-
Dense 6
-
Dense 7
-
@@ -15013,7 +14977,7 @@ Database:%2
QGIS
- QGIS
+
@@ -15021,40 +14985,40 @@ Database:%2
Form
- Form
+
A calendar widget to enter a date.
-
Date format
-
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
- Tákn
+
- Value
- Gildi
+
- Label
- Merki
+
@@ -15072,7 +15036,7 @@ Database:%2
Change...
-
Invert
-
Meira
- Random colors
-
- Symbol levels...
-
- High number of classes!
-
- Classification would yield %1 entries which might not be expected. Continue?
-
- Error
Villa
- There are no available color ramps. You can add them in Style Manager.
Það eru engir tiltæki litastigar. Þú getur bætt þeim við í stílstjóranum.
- The selected color ramp is not available.
Valin litastigun er ekki tiltæk.
- Confirm Delete
Staðfesta eyðingu
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Svæði flokknar var breytt úr '%1' í '%2'. Á að eyða gömlu flokkuninni fyrir endurflokkun?
@@ -15167,17 +15131,17 @@ Should the existing classes be deleted before classification?
Character Selector
-
Font:
-
Current font family and style
-
@@ -15185,17 +15149,17 @@ Should the existing classes be deleted before classification?
Form
- Form
+
Representation for checked state
-
Representation for unchecked state
-
@@ -15203,35 +15167,30 @@ Should the existing classes be deleted before classification?
Shift-click to expand, then collapse others
-
Ctrl (or Alt)-click to toggle all
-
QgsColorButton
- Select Color
-
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -15239,7 +15198,7 @@ Should the existing classes be deleted before classification?
Select Color
-
@@ -15248,7 +15207,7 @@ Should the existing classes be deleted before classification?
Random colors
-
Show compass
-
&About
-
@@ -15274,7 +15233,7 @@ Should the existing classes be deleted before classification?
Pixmap not found
-
@@ -15287,7 +15246,7 @@ Should the existing classes be deleted before classification?
Azimut
-
@@ -15295,7 +15254,7 @@ Should the existing classes be deleted before classification?
Close
- Loka
+
Composer
Smiður
Print Composers
- Prentsmiður
+
Cu&t
-
Cut
-
&Copy
-
Copy
- Afrita
+
&Paste
-
Paste
-
Edit
- Breyta
+
Normal
-
Simulate Photocopy (Grayscale)
-
Simulate photocopy (grayscale)
-
Simulate Fax (Mono)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
Panels
- Hnappaborð
+
Toolbars
- Verkfærastikur
+
Atlas
-
Settings
- Stillingar
+
Window
-
Help
- Hjálp
+
%1%
-
Composition
- Samsetning
+
Item properties
-
Atlas generation
-
Set as atlas feature for %1
-
x: %1 mm
-
y: %1 mm
-
page: %3
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
Choose a file name to save the map as
Veljið skráarnafn til að vista kortið í
@@ -15512,34 +15471,34 @@ Should the existing classes be deleted before classification?
Empty filename pattern
-
The filename pattern is empty. A default one will be used.
-
Directory where to save PDF files
-
Unable to write into the directory
-
The given output directory is not writable. Cancelling.
Gefið útlagssvæði er ekki skrifanlegt. Hættir við.
@@ -15549,252 +15508,252 @@ Should the existing classes be deleted before classification?
Atlas processing error
-
Feature filter parser error: %1
-
Error creating %1.
-
Rendering maps...
-
Abort
- Hætta við
+
- Big image
Stór mynd
- To create image %1x%2 requires about %3 MB of memory. Proceed?
-
- Choose a file name to save the map image as
-
- Memory Allocation Error
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
-
- Image export error
-
- Directory where to save image files
-
- Image format:
-
- SVG warning
-
- Don't show this message again
Ekki birta þessi skilaboð aftur
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
-
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
-
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
-
- SVG Format
-
- Directory where to save SVG files
-
- SVG export error
-
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
-
- Duplicating composer...
-
- Duplicate Composer
-
- Composer duplication failed.
-
- Save template
-
- Composer templates
-
- Save error
Villa við vistun
- Error, could not save file
Villa, gat ekki vistað skrá
- Load template
Lesa inn sniðmát
- Read error
Villa við lestur
- Error, could not read file
Villa, gat ekki lesið skrá
- Composer error
-
- Error, could not create new composer
-
- Loading template into composer...
-
- Project contains WMS layers
Verkið inniheldur WMS lög
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
-
-
- Project contains composition effects
-
-
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
-
Print as raster
- Prenta sem rasta
+ Project contains composition effects
+
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
+
+
+ Print as raster
+
+
+ Landscape
- Lárétt
+
@@ -15802,51 +15761,51 @@ Please try a lower resolution or a smaller papersize
Arrow outline width
-
Arrowhead width
-
Arrow color changed
-
Select arrow color
-
Arrow marker changed
-
Arrow start marker
-
Arrow end marker
-
Start marker svg file
-
End marker svg file
-
@@ -15864,53 +15823,53 @@ Please try a lower resolution or a smaller papersize
Main properties
-
Line width
- Breidd línu
+
mm
- mm
+
Arrow head width
-
Color...
-
Arrow markers
-
Default
-
None
- Ekkert
+
SVG
-
Start marker
-
End marker
-
@@ -15929,32 +15888,32 @@ Please try a lower resolution or a smaller papersize
Center
- miðjað
+
Right
-
Left
-
Attribute
- Eigind
+
Heading
-
Alignment
-
@@ -15967,27 +15926,27 @@ Please try a lower resolution or a smaller papersize
Composer
- Smiður
+
Paper Navigation
-
Composer Item Actions
-
Composer Items
-
Atlas
-
Ctrl+P
- Ctrl+P
+
Zoom full
-
Ctrl+0
-
Zoom in
- Skruna inn
+
Ctrl++
- Ctrl++
+
Zoom out
- Skrunar út
+
Ctrl+-
-
Zoom to 100%
-
Ctrl+1
-
Zoom
- Skruna
+
Export as image
-
Add Scalebar
-
Add new scalebar
-
Show Grid
-
Show grid
- Sýna net
+
Ctrl+'
-
Snap to Grid
-
Snap to grid
-
Ctrl+Shift+'
-
Show Guides
-
Show guides
-
Ctrl+;
-
Snap to Guides
-
Snap to guides
-
Ctrl+Shift+;
-
Smart Guides
-
Smart guides
-
Ctrl+Alt+;
-
Clear Guides
-
Clear guides
-
Add image
-
Move item content
- Flytja innihald hlutar
+
Ctrl+G
- Ctrl+G
+
Ctrl+Shift+G
-
Ctrl+]
-
Ctrl+[
-
Ctrl+Shift+]
-
Ctrl+Shift+[
-
Load from Template
-
Load from template
-
Save as Template
-
Align Left
-
Align selected items left
-
Align Center
-
Align center horizontal
-
Align Right
-
Align selected items right
-
Align Top
-
Align selected items to top
-
Align Center Vertical
-
Align center vertical
-
Align Bottom
-
Align selected items bottom
-
&Quit
-
Ctrl+Q
-
Add Arrow
-
Add arrow
-
Add Table
-
Add attribute table
-
Page Setup
-
Page setup
-
Ctrl+Shift+P
-
&Undo
- &Hætta við
+
&Redo
- &Framkvæma aftur
+
Ctrl+Shift+L
-
Pa&ste in Place
-
Paste in place
-
Ctrl+Shift+V
- Ctrl+Shift+V
+
&Delete
- &Eyða
+
Delete selected items
-
Del
-
De&select All
-
Deselect all
-
Ctrl+Shift+A
-
Select &All
-
Select all items
-
Ctrl+A
- Ctrl+A
+
&Invert Selection
-
Invert selection
-
Select Next Item &Below
-
Select next item below
-
Ctrl+Alt+[
-
Select Next Item &Above
-
Select next item above
-
Ctrl+Alt+]
-
Pan Composer
-
Composer Options...
-
Show Rulers
-
Show rulers
-
Ctrl+R
-
First Feature
-
Previous Feature
-
Next Feature
-
Last Feature
-
Preview Atlas
-
Print Atlas...
-
Export Atlas as Images...
-
Export Atlas as SVG...
-
Export Atlas as PDF...
-
Export Atlas as PDF
-
Atlas Settings
-
Revert last change
-
Ctrl+Z
-
Restore last change
-
Ctrl+Shift+Z
-
Add Rectangle
-
Add rectangle
-
Add Triangle
-
Add triangle
-
Add Ellipse
-
Add ellipse
-
Add HTML
-
Add html frame
-
Composer Manager
-
Composer manager
- Stjórn prentsmiðs
+
&New Composer
-
New composer
-
Ctrl+N
- Ctrl+N
+
&Save Project
-
Save project
-
Ctrl+S
- Ctrl+S
+
&Duplicate Composer
-
Duplicate composer
-
New from Template
-
New from template
-
Lock Selected Items
-
Ctrl+L
- Ctrl+L
+
Unlock All
-
Unlock All Items
-
@@ -16807,17 +16766,17 @@ Please try a lower resolution or a smaller papersize
Left
-
Center
- miðjað
+
Right
-
@@ -16825,12 +16784,12 @@ Please try a lower resolution or a smaller papersize
Ascending
- Hækkandi
+
Descending
- Lækkandi
+
@@ -16838,42 +16797,42 @@ Please try a lower resolution or a smaller papersize
Use existing frames
-
Extend to next page
-
Repeat on every page
-
Repeat until finished
-
Change html url
-
Select HTML document
-
Change resize mode
-
Use smart breaks changed
-
@@ -16881,125 +16840,125 @@ Please try a lower resolution or a smaller papersize
HTML Frame
-
HTML frame
-
Main properties
-
URL
- URL
+
...
- ...
+
Resize mode
-
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
- mm
+
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
Lit ramma hefur verið breytt
- Background color changed
Lit bakgrunns hefur verið breytt
- Item position changed
-
- Item outline width
-
- Item frame join style
-
- Item frame toggled
-
- Item background toggled
-
- Select background color
-
- Select frame color
- Veldu lit á ramma
+
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
-
- Item rotation changed
-
@@ -17010,117 +16969,106 @@ Please try a lower resolution or a smaller papersize
Altækir valkostir
- Position and size
-
- Reference point
-
- X
-
- Y
-
- Width
- Vídd
+
- Height
- Hæð
+
- Page
-
- ...
- ...
-
-
- Rotation
- Snúningur
+
- °
-
- Frame
-
- mm
- mm
+
- Join style
- Stíll sameiningar
+
- Rendering
-
- Blending mode
-
- Thickness
-
- Color...
-
- Background
-
- Transparency
- Gagnsæi
+
- Item ID
-
- Id
- Kenni
+
@@ -17128,7 +17076,7 @@ Please try a lower resolution or a smaller papersize
Label text HTML state changed
-
Label color changed
-
- Insert expression
-
- Label alignment changed
Afstaða merkis breytt
@@ -17182,17 +17130,17 @@ Please try a lower resolution or a smaller papersize
Main properties
-
Render as HTML
-
Insert an expression
-
Alignment
-
Vertical
- Lóðrétt
+
Horizontal
- Lárétt
+
Display
- Birta
+
Margin
- Spássíur
+
mm
- mm
+
QgsComposerLegend
+ Legend
- Skýringar
+ Skýringar
@@ -17298,17 +17247,17 @@ Please try a lower resolution or a smaller papersize
Item
-
Title style
-
Item wrapping changed
-
Legend title alignment changed
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
Skýringarhóp bætt við
- Map %1
- Kort %1
+
- None
- Ekkert
+
@@ -17459,7 +17408,7 @@ Please try a lower resolution or a smaller papersize
Main properties
-
Map
- Kort
+
Wrap text on
-
Legend items
-
Show feature count for each class of vector layer.
-
Fonts
-
Space above text using subgroup style.
-
Subgroup space
-
Space above symbol and symbol label.
-
Column space
-
Font color...
- Leturlitur...
+
Columns
- Dálkar
+
Count
-
Equal column widths
-
Allow to split layer items into multiple columns.
-
Split layers
-
Spacing
-
Title alignment:
-
Left
-
Center
- miðjað
+
Right
-
Update legend. User defined labels are preserved.
-
Update item
-
Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
-
Update all
-
...
- ...
+
Auto update
-
Title font...
-
Subgroup font...
-
Group font...
-
Item font...
-
Symbol
- Tákn
+
Symbol width
-
Symbol height
-
WMS LegendGraphic
-
Legend width
-
Legend height
-
Space above text using group style.
-
Group Space
-
Symbol space
-
Space between symbol icon and symbol label (symbol label left margin).
-
Icon label space
-
Box space
-
Space below title.
-
Title space
-
@@ -17718,7 +17667,7 @@ Please try a lower resolution or a smaller papersize
&Duplicate
-
Specific
-
Error, template file not found
-
Composer error
-
Error, could not create composer
-
Loading template into composer...
-
Error, could not load template file
-
Choose template
-
Composer templates
-
File system error
-
Error, could not open or create local directory
-
copy
-
Duplicating composer...
-
Duplicate Composer
-
Composer duplication failed.
-
@@ -17838,7 +17787,7 @@ Please try a lower resolution or a smaller papersize
New from template
-
...
- ...
+
Open template directory
-
user
-
default
-
QgsComposerMap
- Map %1
Kort %1
- Map will be printed here
Kort verður prentað hér
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Skyndiminni
- Render
Teikna
- Rectangle
Rétthyrningur
- Solid
Heilt
- Cross
Kross
- Markers
- Decimal
+
- Decimal
- DegreeMinute
+
+
+ DegreeMinuteSecond
+
+
+ No frame
+
+
+ Zebra
+
+
+ Map scale changed
+
+
+ Map rotation changed
+
+
+ Map extent changed
+
DegreeMinute
-
-
- DegreeMinuteSecond
-
-
- Zebra
-
-
- Map scale changed
-
-
- Map rotation changed
-
-
- Map extent changed
-
-
- Select font color
- Val á lit leturs
+
Select grid frame color
-
Select grid frame fill color
-
- Canvas items toggled
-
- None
- Ekkert
+
- Overview frame style changed
-
- Overview centering mode changed
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- change...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
-
- Grid interval changed
-
- Grid offset changed
-
- Grid line style changed
-
- Grid type changed
-
- Grid cross width changed
+
+
+ Annotation font changed
-
- Label font changed
+
+
+ Annotation distance changed
-
- Annotation format changed
-
- Annotation toggled
-
- Changed annotation precision
-
- Changed grid frame style
-
- Changed grid frame width
+
+
+ Changed grid frame line thickness
-
- Grid frame color changed
-
- Grid frame first fill color changed
-
- Grid frame second fill color changed
-
- Inside frame
-
- Outside frame
-
- Disabled
-
- Horizontal
Lárétt
- Vertical
Lóðrétt
- Annotation position changed
-
- Changed annotation direction
-
- Map %1
- Kort %1
+
@@ -18210,375 +18097,289 @@ Please try a lower resolution or a smaller papersize
Korta valkostir
- Map
Kort
- Main properties
-
- Update preview
Uppfæra forskoðun
- Scale
Skali
- Map rotation
-
- Draw map canvas items
-
- Lock layers for map item
Læsa lögum fyrir kortahlut
- Extents
kortvídd
- X max
X Hámark
- Y min
Y lágmark
- Y max
Y Hámark
- Set to map canvas extent
Stilla á kortvídd kortaglugga
- X min
X lágmark
- View extent in map canvas
-
- Controlled by atlas
-
- Margin around feature
-
- %
- %
+
- Fixed scale
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
- Predefined scale (best fit)
-
+ Show grid
+
+
+ Grid &type
- Net &tegund
+ Net &tegund
- Offset
- Hliðrun
+
- mm
- mm
+
- Blend mode
-
- Interval
-
- Grid frame
-
- Frame size
-
- Frame line thickness
-
- Color...
-
- Frame fill colors
-
- Marker style
-
-
- Overview blending mode
-
- Invert overview
-
- Center on overview
-
- X
-
- °
-
- Y
-
- Cross width
Breidd kross
- Frame style
-
- Line style
-
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
-
-
- CRS
-
-
- change...
-
- Interval units
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- No frame
-
-
- Zebra
-
-
- Draw coordinates
-
- Format
-
- Left
-
- Right
-
- Top
- Efst
+
- Bottom
- Neðst
+
- Font
- Leturgerð
+
- Font...
Leturgerð...
- Font color
- Leturlitur
-
-
- Distance to map frame
-
- Coordinate precision
Nákvæmni hnits
- Font color...
- Leturlitur...
+
- Overview
Yfirlit
- Overview frame
Yfirlits rammi
- Overview style
Yfirlits stíll
- Change...
-
@@ -18586,51 +18387,51 @@ Please try a lower resolution or a smaller papersize
Change item position
-
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
- Smiður
+
- Picture expression eval error: %1
-
@@ -18643,64 +18444,64 @@ Please try a lower resolution or a smaller papersize
Picture changed
Mynd breytt
- Expression based image path
-
- Picture rotation changed
Snúningur myndar breyttur
- Select new preview directory
Veldu nýtt forskoðunarskráarsafn
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
Samræming snúnings breytt
- Rotation map changed
-
- Map %1
Kort %1
- Creating icon for file %1
Bý til tákn fyrir skrá %1
@@ -18715,22 +18516,22 @@ Please try a lower resolution or a smaller papersize
Picture
-
Main properties
-
Image source
-
Path
-
Expression
-
Resize mode
-
Placement
- Staðsetning
+
Zoom
- Skruna
+
Stretch
-
Clip
-
Zoom and resize frame
-
Resize frame to image size
-
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
- Miðjað
+
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Loading previews...
-
Image search paths
-
Image rotation
-
°
-
QgsComposerScaleBar
- units
-
- km
-
- m
-
- miles
-
- ft
-
- Nm
-
QgsComposerScaleBarWidget
Single Box
Einfaldur kassi
Double Box
Tvöfaldur kassi
Line Ticks Middle
-
Line Ticks Down
-
Line Ticks Up
-
Numeric
Tölugildi
Left
-
Middle
- Miðjað
+
Right
-
Map units
-
Meters
- Metrar
+
Feet
- Fet
+
Nautical Miles
-
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Val á lit leturs
-
-
- Select stroke color
-
-
- Map %1
Kort %1
- Scalebar map changed
-
- Scalebar line width
-
- Scalebar segment size
-
- Scalebar segments left
-
- Number of scalebar segments changed
-
- Scalebar height changed
-
- Scalebar font changed
-
- Scalebar font color changed
-
- Scalebar color changed
-
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
-
- Scalebar unit text
-
- Scalebar map units per segment
-
- Scalebar style changed
-
- Scalebar label bar space
-
- Scalebar box content space
-
- Scalebar alignment
-
- Scalebar changed to map units
-
- Scalebar changed to feet
-
- Scalebar changed to nautical miles
-
- Scalebar changed to meters
-
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -19124,12 +18900,12 @@ Please try a lower resolution or a smaller papersize
Scalebar
-
Main properties
-
Units
- Einingar
+
Label
- Merki
+
Map units per bar unit
-
Segments
- Hlutar
+
left
-
right
-
Size
- Stærð
+
units
-
Height
- Hæð
+
Display
- Birta
+
Box margin
-
Labels margin
-
Line width
- Breidd línu
+
Join style
- Stíll sameiningar
+
Cap style
-
Alignment
-
Fonts and colors
-
Font color...
- Leturlitur...
+
Fill color...
-
Secondary fill color...
-
-
- Stroke color...
-
@@ -19266,39 +19037,39 @@ Please try a lower resolution or a smaller papersize
Ellipse
Sporbaugur
Rectangle
Rétthyrningur
Triangle
Þríhyrningur
- Shape style changed
-
- Shape radius changed
-
- Shape type changed
-
@@ -19311,32 +19082,32 @@ Please try a lower resolution or a smaller papersize
Shape
-
Main properties
-
Corner radius
-
mm
- mm
+
Style
- Stíll
+
Change...
-
@@ -19344,22 +19115,22 @@ Please try a lower resolution or a smaller papersize
Descending
- Lækkandi
+
Ascending
- Hækkandi
+
Attribute
- Eigind
+
Sort Order
-
@@ -19373,38 +19144,38 @@ Please try a lower resolution or a smaller papersize
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
-
Table header alignment changed
-
Table layer changed
-
Table attribute settings
-
Table map changed
-
Table header font
-
Table content font
-
Table grid stroke
-
Table grid color
-
Table grid toggled
-
Table visible only toggled
-
@@ -19461,17 +19232,17 @@ Please try a lower resolution or a smaller papersize
Attribute Table
- Eigindatafla
+
Attribute table
-
Main properties
-
Composer map
-
Refresh table data
-
Filter with
-
...
- ...
+
mm
- mm
+
Stroke width
-
Color...
-
Fonts
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
-
Center
- miðjað
+
Right
-
@@ -19633,7 +19404,7 @@ Please try a lower resolution or a smaller papersize
QGIS
- QGIS
+
Html item added
-
Html frame added
-
Item moved
-
QgsComposition
- Label added
- Merki bætt við
+
- Map added
- Korti bætt við
+
- Arrow added
- Ör bætt við
+
- Scale bar added
- Kvarðastiku bætt við
+
- Shape added
- Útliti bætt við
+
- Picture added
- Mynd bætt við
+
- Legend added
- Skýringu bætt við
+
- Table added
- Töflu bætt við
+
+
+ Aligned items left
+
+
+ Aligned items horizontal center
+
+
+ Aligned items vertical center
+
Aligned items left
-
-
- Aligned items horizontal center
-
-
- Aligned items vertical center
-
-
- Aligned items right
-
- Aligned items top
-
- Aligned items bottom
-
- Items locked
-
- Items unlocked
-
- Item z-order changed
-
- Remove item group
-
- Frame deleted
-
- Item deleted
-
- Multiframe removed
-
@@ -19864,148 +19635,148 @@ Please try a lower resolution or a smaller papersize
Landscape
Lárétt
Portrait
Lóðrétt
Map %1
- Kort %1
+
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
-
- ANSI A (Letter; 8.5x11 in)
-
- ANSI B (Tabloid; 11x17 in)
-
- ANSI C (17x22 in)
-
- ANSI D (22x34 in)
-
- ANSI E (34x44 in)
-
- Arch A (9x12 in)
-
- Arch B (12x18 in)
-
- Arch C (18x24 in)
-
- Arch D (24x36 in)
-
- Arch E (36x48 in)
-
- Arch E1 (30x42 in)
-
- Custom
Sérsnið
@@ -20023,119 +19794,109 @@ Please try a lower resolution or a smaller papersize
Pappír og gæði
- Presets
-
- ...
- ...
-
-
- Width
- Vídd
+
- Height
- Hæð
+
- Units
- Einingar
+
- Number of pages
-
- Orientation
Stefna
- Export resolution
-
- Print as raster
Prenta sem rasta
-
- Snap tolerance
- Grips þolvik
-
-
- px
-
Change...
-
- Page background
-
- Grid
+
+
+ dpi
-
- World file on
-
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
- mm
+
- Grid offset
-
- x:
-
- y:
-
+ Spacing
+
+
+ Snap to alignments
+
+
+ Tolerance
- Þolvik
+ Þolvik
@@ -20164,7 +19925,7 @@ Please try a lower resolution or a smaller papersize
Set none
-
XML file
-
All files
- Allar skrár
+
The file is not an shortcuts exchange file.
-
The file contains shortcuts created with different locale, so you can't use it.
-
Error starting help viewer [%1]
-
Context help
-
<h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
-
@@ -20295,35 +20056,35 @@ Please try a lower resolution or a smaller papersize
The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
CRS
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
inverse transform
-
forward transform
-
%1 of
%2PROJ.4: %3 +to %4
Error: %5
-
@@ -20331,12 +20092,12 @@ Error: %5
Name
- Nafn
+
Info
-
@@ -20344,27 +20105,27 @@ Error: %5
colors
-
discrete
-
continuous
-
continuous (multi)
-
variants
-
@@ -20372,24 +20133,24 @@ Error: %5
Selections by theme
-
All by author
-
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
All Ramps (%1)
-
%1 directory details
-
%1 gradient details
-
@@ -20422,53 +20183,53 @@ and current file is [%3]
cpt-city color ramp
-
Selection and preview
-
License
-
Palette
-
Path
-
Information
- Upplýsingar
+
Author(s)
-
Source
- Uppruni
+
Details
-
Save as standard gradient
-
@@ -20505,7 +20266,7 @@ and current file is [%3]
Control rendering order
-
@@ -20516,27 +20277,27 @@ and current file is [%3]
QGIS Custom Projection
-
This proj4 projection definition is not valid.
-
new CRS
-
The proj4 definition of '%1' is not valid.
-
Northing and Easthing must be in decimal form.
-
Custom Coordinate Reference System Definition
-
ID
- Kenni
+
You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
-
Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
-
Geographic / WGS84
-
Destination CRS
-
Name:
-
Parameters:
-
Copy
existing CRS
-
Add new CRS
-
Remove
- Fjarlægja
+
Object name
-
Label
- Merki
+
Description
- Lýsing
+
Choose a customization INI file
-
Customization files (*.ini)
-
@@ -20679,57 +20440,57 @@ and current file is [%3]
Customization
-
Enable customization
-
toolBar
-
Catch
-
Switch to catching widgets in main application
-
Save
- Vista
+
Save to file
-
Load
- Lesa inn
+
Load from file
-
Expand All
-
Collapse All
-
Description...
-
Edit...
-
Paste
-
Copy
- Afrita
+
string
-
int
-
double
-
Field type:
-
unknown type
-
Data defined override
-
expression
-
field
- svæði
+
Deactivate
-
Activate
-
Attribute field
- Eigindasvæði
+
No matching field types found
-
Expression
-
Current:
-
Data definition description
-
undefined
-
Parse error: %1
-
'%1' field missing
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
no
- nei
+
<b>Usage:</b><br>%1<br>
-
<b>Expected input:</b><br>%1<br>
-
<b>Valid input types:</b><br>%1<br>
-
<b>Current definition %1:</b><br>%2
-
string
-
bool [<b>1</b>=True|<b>0</b>=False]
-
string of variable length
-
int [<= 0 =>]
-
int [>= 0]
-
int [>= 1]
-
double [<= 0.0 =>]
-
double [>= 0.0]
-
double coord [<b>X,Y</b>] as <= 0.0 =>
-
double [-180.0 - 180.0]
-
int [0-100]
-
string [<b>r,g,b</b>] as int 0-255
-
string [<b>r,g,b,a</b>] as int 0-255
-
@@ -20993,57 +20754,57 @@ and current file is [%3]
Data defined properties
- Stillingar skilgreindar í gögnum
+
Property
-
Expression
-
Help
- Hjálp
+
double
-
'<red>,<green>,<blue>,<alpha>'
-
'<filename>'
-
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -21051,68 +20812,68 @@ and current file is [%3]
Form
- Form
+
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
-
custom
-
preview
-
@@ -21120,13 +20881,13 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
unknown
- óþekkt
+
@@ -21134,42 +20895,42 @@ and current file is [%3]
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Destination CRS
-
Source CRS
-
Layer
- Lag
+
@@ -21177,7 +20938,7 @@ and current file is [%3]
Add PostGIS layers
-
Hold dialog open
-
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
@@ -21279,71 +21040,71 @@ and current file is [%3]
Copyright Label Decoration
-
Enable copyright label
-
&Enter your copyright label here:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
&Placement
-
Bottom Left
-
Top Left
-
Bottom Right
-
Top Right
-
&Orientation
-
Horizontal
- Lárétt
+
Vertical
- Lóðrétt
+
Color
- Litur
+
@@ -21359,22 +21120,22 @@ p, li { white-space: pre-wrap; }
No active layer
- Ekkert virkt lag
+
Please select a raster layer
- Vinsamlegast veljið rastalag
+
Invalid raster layer
-
Layer CRS must be equal to project CRS
-
@@ -21382,77 +21143,77 @@ p, li { white-space: pre-wrap; }
Grid properties
-
Enable grid
-
Interval X
-
Interval Y
-
Grid type
-
Line symbol
-
Draw annotation
-
Annotation direction
-
Font...
- Leturgerð...
+
Distance to map frame
-
Coordinate precision
- Nákvæmni hnits
+
Marker symbol
-
Offset X
-
Offset Y
-
Update Interval / Offset from
-
Active Raster Layer
-
Line
- Lína
+
Marker
- Merki
+
Horizontal
- Lárétt
+
Vertical
- Lóðrétt
+
Boundary direction
-
Horizontal and Vertical
-
@@ -21505,27 +21266,27 @@ p, li { white-space: pre-wrap; }
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
North arrow pixmap not found
-
@@ -21533,62 +21294,62 @@ p, li { white-space: pre-wrap; }
North Arrow Decoration
-
Preview of north arrow
-
Angle
- Horn
+
Placement
- Staðsetning
+
Placement on screen
-
Top Left
-
Top Right
-
Bottom Left
-
Bottom Right
-
Enable North Arrow
-
Set direction automatically
-
Pixmap not found
-
@@ -21596,102 +21357,102 @@ p, li { white-space: pre-wrap; }
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
Tick Down
-
Tick Up
-
Bar
-
Box
- Kassi
+
km
- km
+
mm
- mm
+
cm
- cm
+
m
- m
+
miles
-
mile
- míla
+
inches
-
foot
- fet
+
feet
- fet
+
degree
- gráða
+
degrees
- gráður
+
unknown
- óþekkt
+
@@ -21699,97 +21460,97 @@ p, li { white-space: pre-wrap; }
Scale Bar Decoration
-
Placement
- Staðsetning
+
Top Left
-
Top Right
-
Bottom Left
-
Bottom Right
-
Scale bar style
-
Select the style of the scale bar
-
Tick Down
-
Tick Up
-
Box
- Kassi
+
Bar
-
Color of bar
-
Size of bar
-
Enable scale bar
-
Automatically snap to round number on resize
-
metres/km
-
feet/miles
-
degrees
- gráður
+
@@ -21805,12 +21566,12 @@ p, li { white-space: pre-wrap; }
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -21896,122 +21657,122 @@ p, li { white-space: pre-wrap; }
No layer name
-
Please enter a layer name before adding the layer to the map
-
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Invalid regular expression
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Choose a delimited text file to open
-
Text files
-
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
Regular expression is not valid
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
All files
- Allar skrár
+
@@ -22019,142 +21780,142 @@ p, li { white-space: pre-wrap; }
Create a Layer from a Delimited Text File
-
File Name
- Skráarnafn
+
Full path to the delimited text file
-
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
-
Layer name
- Nafn lags
+
Name to display in the map legend
-
Name displayed in the map legend
-
Browse to find the delimited text file to be processed
-
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
-
Browse...
- Fletta...
+
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
Tab
-
Space
- Bil
+
Comma
-
Encoding
-
Select the file encoding
-
X and Y coordinates are expressed in degrees/minutes/seconds
-
DMS coordinates
-
Geometry field
-
Name of the field containing well known text value
-
Geometry type
-
Detect
-
Point
- Punktur
+
Line
- Lína
+
Polygon
-
Field options
-
File format
-
Number of header lines to discard
-
The number of lines to discard from the beginning of the file
-
Field names are read from the first record. If not selected then fields are numbered
-
First record has field names
-
CSV (comma separated values)
-
Fields are defined by the specified delimiter, quote, and escape characters
-
Custom delimiters
-
Regular expression delimiter
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use spatial index
-
Use an index to improve performance of subset filters (set in layer properties)
-
Use subset index
-
Watch for changes to the file by other applications while QGIS is running
-
Watch file
-
Geometry definition
-
Geometry is a point defined by X and Y coordinate fields
-
Point coordinates
-
Geometry is read as a well known text string from the selected fields
-
Well known text (WKT)
-
The file contains only attribute information - it will not be displayed on the map
-
No geometry (attribute only table)
-
Trim leading and trailing spaces from fields
-
Trim fields
-
Discard empty fields in each record
-
Discard empty fields
-
Number fields use comma for a decimal separator
-
Decimal separator is comma
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Semicolon
-
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
-
Regular expression used to split each line into fields
-
Layer settings
-
Sample data
-
Colon
-
<p align="right">X field</p>
-
Name of the field containing x values
-
<p align="right">Y field</p>
-
Name of the field containing y values
-
@@ -22484,7 +22245,7 @@ p, li { white-space: pre-wrap; }
Category label
-
@@ -22493,180 +22254,180 @@ p, li { white-space: pre-wrap; }
mm
- mm
+
Map units
-
Around Point
-
Over Point
-
Line
- Lína
+
Horizontal
- Lárétt
+
Free
-
On line
-
Above line
-
Below Line
-
Map orientation
-
Pie chart
-
Text diagram
-
Histogram
-
Height
- Hæð
+
x-height
-
Area
- Svæði
+
Diameter
-
None
- Ekkert
+
Top
- Efst
+
Right
-
Bottom
- Neðst
+
Left
-
Unknown diagram type.
-
The diagram type '%1' is unknown. A default type is selected for you.
-
Bar length: Scale linearly, such as the following value matches the specified size.
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Transparency: %1%
-
Diagrams: No attributes added.
-
Interpolation value
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Background color
- Litur bakgrunns
+
Pen color
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -22674,87 +22435,87 @@ p, li { white-space: pre-wrap; }
Display diagrams
-
Diagram type
-
Priority:
-
Low
- Lágt
+
High
- Hátt
+
Appearance
-
Background color
- Litur bakgrunns
+
Line color
- Línulitur
+
Line width
- Breidd línu
+
Font...
- Leturgerð...
+
Bar width
-
Transparency 0%
-
Start Angle
-
Only show diagrams with a size inside the specified range.
-
Hide diagrams with a size outside the specified range.
-
Scale dependent visibility
-
Minimum
- Lágmark
+
Size
- Stærð
+
Fixed size
-
Size units
- Eining stærðar
+
Scale linearly between 0 and the following attribute value / diagram size:
-
Attribute
- Eigind
+
Edit expression
-
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Scale
- Skali
+
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
Increase size of small diagrams
-
Minimum size
-
Position
- Staðsetning
+
Placement
- Staðsetning
+
Distance
-
Data defined position
- Staðsetning skilgreind í gögnum
+
x
- x
+
y
- y
+
Automated placement settings
-
Label placement
-
Bar Orientation
-
Up
- Upp
+
Down
- Niður
+
Right
-
Left
-
Attributes
- Eigindir
+
Available attributes
-
Add expression
-
Assigned attributes
-
Drag and drop to reorder
-
Color
- Litur
+
@@ -22936,58 +22697,58 @@ Leave empty to automatically apply the maximum value.
Name
- Nafn
+
Size
- Stærð
+
Date
-
Permissions
-
Owner
-
Group
-
Type
- Tegund
+
folder
-
file
-
link
-
@@ -23021,50 +22782,50 @@ Leave empty to automatically apply the maximum value.
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
Run layer action
-
Open form
-
Loading features...
-
Abort
- Hætta við
+
Attribute table
-
%1 features loaded.
-
@@ -23072,17 +22833,17 @@ Parser error:
...
- ...
+
Expression
-
Column Preview
-
@@ -23090,12 +22851,12 @@ Parser error:
Form
- Form
+
Dummy Text
-
@@ -23103,12 +22864,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -23116,57 +22877,57 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
- Vista sem
+
...
- ...
+
No symbology
-
Feature symbology
-
Symbol layer symbology
-
Select all
- Velja allt
+
Unselect all
- Fjalægja allt val
+
Export features intersecting the current map extent
-
@@ -23175,12 +22936,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -23188,52 +22949,52 @@ Parser error:
Symbol width
-
Symbol height
-
Rotation
- Snúningur
+
Outline width
-
Fill color
-
Border color
-
Symbol name
-
Offset
- Hliðrun
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -23254,37 +23015,37 @@ Parser error:
Search method
-
Chain (fast)
-
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
FALP (fastest)
-
Number of candidates
-
(i.e. including colliding objects)
-
Draw text as outlines (recommended)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
Show all labels and features for all layers
-
Automated Placement Engine
-
Show candidates (for debugging)
-
@@ -23342,7 +23103,7 @@ Parser error:
Error
- Villa
+
@@ -23350,35 +23111,35 @@ Parser error:
Dialog
- Valmynd
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
Always show details
-
Details >>
-
@@ -23386,7 +23147,7 @@ p, li { white-space: pre-wrap; }
Expression string builder
-
@@ -23394,122 +23155,122 @@ p, li { white-space: pre-wrap; }
(String Concatenation)
-
Joins two values together into a string
-
Usage
-
'Dia' || Diameter
-
Search
- Leita
+
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Parser Error
-
Eval Error
-
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
-
Load top 10 unique values
-
Load all unique values
-
@@ -23517,148 +23278,148 @@ p, li { white-space: pre-wrap; }
Form
- Form
+
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Operators
-
Equal operator
-
=
- =
+
Addition operator
-
+
- +
+
Subtraction operator
-
-
- -
+
Division operator
-
/
- /
+
Multiplication operator
-
*
- *
+
Power operator
-
^
- ^
+
String Concatenation
-
||
-
Open Bracket
-
(
- (
+
Close Bracket
-
)
- )
+
Output preview is generated <br> using the first feature from the layer.
-
Output preview:
-
Expression
-
@@ -23666,37 +23427,37 @@ p, li { white-space: pre-wrap; }
Select By Expression
-
Close
- Loka
+
...
- ...
+
Select
- Velja
+
Add to selection
-
Remove from selection
-
Select within selection
-
@@ -23704,22 +23465,22 @@ p, li { white-space: pre-wrap; }
layer
-
map view
-
user defined
-
Extent (current: %1)
-
@@ -23727,37 +23488,37 @@ p, li { white-space: pre-wrap; }
Form
- Form
+
West
- Vestur
+
East
- Austur
+
North
- Norður
+
South
- Suður
+
Layer extent
-
Map view extent
-
@@ -23773,7 +23534,7 @@ p, li { white-space: pre-wrap; }
Dialog
- Valmynd
+
@@ -23782,28 +23543,28 @@ p, li { white-space: pre-wrap; }
Not available for layer
-
Only update %1 selected features
-
Evaluation error
-
Provider error
-
Could not add the new field to the provider.
-
An error occured while evaluating the calculation string:
%1
-
Please enter a field name
-
The expression is invalid see (more info) for details
-
@@ -23833,37 +23594,37 @@ p, li { white-space: pre-wrap; }
Field calculator
-
Only update selected features
-
Create a new field
-
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Update existing field
-
@@ -23881,7 +23642,7 @@ p, li { white-space: pre-wrap; }
Expression dialog
-
@@ -23889,201 +23650,201 @@ p, li { white-space: pre-wrap; }
Label
- Merki
+
Id
- Kenni
+
Name
- Nafn
+
Type
- Tegund
+
Type name
-
Length
- Lengd
+
Precision
- Nákvæmni
+
Comment
- Athugasemd
+
Edit widget
-
Alias
-
Layer
- Lag
+
Field
- svæði
+
Name conflict
-
The attribute could not be inserted. The name already exists in the table.
-
Added attribute
-
Deleted attribute
- Eydd eigind
+
Line edit
-
Unique values
- Einkvæm gildi
+
Unique values editable
-
Classification
-
Value map
-
Edit range
-
Slider range
-
Dial range
-
File name
-
Enumeration
-
Immutable
-
Hidden
- Falið
+
Checkbox
-
Text edit
-
Calendar
-
Value relation
-
UUID generator
-
Photo
-
Web view
-
Color
- Litur
+
Editor Widget
-
Select edit form
-
UI file
-
@@ -24091,123 +23852,123 @@ p, li { white-space: pre-wrap; }
Field calculator
-
Click to toggle table editing
-
Toggle editing mode
-
New column
-
Ctrl+N
- Ctrl+N
+
Delete column
- Eyða dálki
+
Fields
- Svæði
+
Ctrl+X
- Ctrl+X
+
Relations
-
...
- ...
+
Edit UI
-
+
- +
+
-
- -
+
>
- >
+
^
- ^
+
v
-
Suppress attribute form pop-up after feature creation
-
Default
-
On
-
Off
-
Autogenerate
-
Drag and drop designer
-
Provide ui-file
-
Attribute editor layout:
-
Python Init function
-
@@ -24237,12 +23998,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
...
- ...
+
Select a file
-
@@ -24251,13 +24012,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
-
Map unit
-
@@ -24270,7 +24031,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Qt designer file
-
@@ -24278,7 +24039,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Form annotation
-
Devices
-
Device name
-
This is the name of the device as it will appear in the lists
-
Commands
-
Track download
-
Route upload
-
Waypoint download
-
The command that is used to download routes from the device
-
Route download
-
The command that is used to upload waypoints to the device
-
Track upload
-
The command that is used to download tracks from the device
-
The command that is used to upload routes to the device
-
The command that is used to download waypoints from the device
-
The command that is used to upload tracks to the device
-
Waypoint upload
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
-
@@ -24482,7 +24243,7 @@ p, li { white-space: pre-wrap; }
Timed out!
-
Dis&connect
-
Error opening log file.
-
%1 m
-
%1 km/h
-
Automatic
-
Manual
- Handvirkt
+
3D
- 3D
+
2D
- 2D
+
No fix
-
Differential
-
Non-differential
-
No position
-
Valid
-
Invalid
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
Cannot add feature. Unknown WKB type. Choose a different layer and try again.
-
NMEA files
-
&Add feature
-
&Add Point
-
&Add Line
-
&Add Polygon
-
@@ -24680,7 +24441,7 @@ Errors: %2
&Add feature
-
Add track point
-
Reset track
-
Position
- Staðsetning
+
Signal
-
Debug
-
latitude of position fix (degrees)
-
longitude of position fix (degrees)
-
antenna altitude with respect to geoid (mean sea level)
-
date/time of position fix (UTC)
-
track direction (degrees)
-
Horizontal Dilution of Precision
-
HDOP
-
Vertical Dilution of Precision
-
VDOP
-
Position Dilution of Precision
-
PDOP
-
GPS receiver configuration 2D/3D mode: Automatic or Manual
-
Mode
- Hamur
+
position fix dimensions: 2D, 3D or No fix
-
quality of the position fix: Differential, Non-differential or No position
-
position fix status: Valid or Invalid
-
Status
-
H accurancy
-
V accurancy
-
Refresh serial device list
-
00000;
-
gpsd
-
Track
-
Track width in pixels
-
save layer after every feature added
-
never
-
(Note: Selecting correct file type in browser dialog important!)
-
Download from GPS
-
Bad URI - you need to specify the feature type.
-
Dataset Description
-
Band %1
-
X: %1 Y: %2 Bands: %3
-
Dimensions
-
Origin
-
Pixel Size
-
Band
-
Format not supported
-
Cannot read data
-
Cannot get GDAL raster band: %1
-
@@ -25511,7 +25272,7 @@ Vinsamlega endurveljið gilda skrá.
By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.
-
@@ -25527,17 +25288,17 @@ Vinsamlega endurveljið gilda skrá.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -25668,42 +25429,42 @@ Vinsamlega endurveljið gilda skrá.
Configure Georeferencer
-
Point tip
-
Show IDs
-
Show coords
-
Residual units
-
Pixels
-
Use map units if possible
-
PDF report
-
Show Georeferencer window docked
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
@@ -25789,7 +25550,7 @@ p, li { white-space: pre-wrap; }
Unsupported Data Source
-
Georeferencer - %1
-
Transform:
-
Info
-
GDAL scripting is not supported for %1 transformation
-
Load GCP points
-
GCP file
-
No GCP points to save
-
Save GCP points
-
Please load raster to be georeferenced
-
Current transform parametrisation
-
Current map coordinate
-
None
- Ekkert
+
Coordinate of image(column/line)
-
Unable to open GCP points file %1
-
Save GCPs
-
Save GCP points?
-
Failed to get linear transform parameters
-
World file exists
-
<p>The selected file already seems to have a world file! Do you want to replace it with the new world file?</p>
-
Failed to compute GCP transform: Transform is not solvable
-
Could not write to %1
-
Transformation parameters
-
Translation x
-
Translation y
-
Scale x
-
Scale y
-
Rotation [degrees]
-
Mean error [%1]
-
Residuals
-
Translation (%1, %2)
-
Scale (%1, %2)
-
Rotation: %1
-
Mean error: %1
-
Copy in clipboard
-
%1
-
GDAL script
-
Please set transformation type
-
Please set output raster name
-
%1 requires at least %2 GCPs. Please define more
-
Helmert
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin plate spline (TPS)
-
Projective
-
GCP table
-
toolBar
-
Ctrl+-
-
Transformation settings
-
Start georeferencing
-
Generate GDAL script
-
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
Save GCP points as...
-
Load GCP points
-
Configure Georeferencer
-
Move GCP point
-
Local histogram stretch
-
Full histogram stretch
-
@@ -26324,48 +26085,48 @@ p, li { white-space: pre-wrap; }
GDAL files
-
DEM files
-
All files
- Allar skrár
+
Open raster file
-
Invalid Path: The file is either unreadable or does not exist
-
Invalid URL:
-
Do you want to add the datasource anyway?
-
Open 3D model file
-
Model files
-
@@ -26373,209 +26134,209 @@ p, li { white-space: pre-wrap; }
Globe Settings
- Hnattarstillingar
+
Elevation
-
Type
- Tegund
+
Raster
- Rasti
+
TMS
-
URL/File
-
...
- ...
+
Up
- Upp
+
Map
- Kort
+
Base Layer
-
URL
- URL
+
TextLabel
- Textamerki
+
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Down
- Niður
+
Add
- Bæta við
+
Remove
- Fjarlægja
+
Cache
- Skyndiminni
+
Path
-
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Model
-
Point Layer
-
3D Model
-
Stereo
-
Stereo Mode
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -26584,32 +26345,32 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Abort
- Hætta við
+
Error: %1 on line %2, column %3
-
WFS
-
GML Getfeature network request failed with error: %1
-
Network
-
@@ -26617,7 +26378,7 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
@@ -26625,90 +26386,90 @@ p, li { white-space: pre-wrap; }
Millimeter
-
Map unit
-
Color (start)
-
Color (end)
-
Angle
- Horn
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
QgsGraduatedSymbolRendererV2Model
- Symbol
- Tákn
+
- Value
- Gildi
+
- Label
- Merki
+
@@ -26726,7 +26487,7 @@ p, li { white-space: pre-wrap; }
Change...
-
Quantile (Equal Count)
-
Natural Breaks (Jenks)
-
Standard Deviation
-
Pretty Breaks
-
Invert
-
Delete
- Eyða
+
Delete all
- Eyða öllu
+
Meira
- Symbol levels...
-
- Error
Villa
- There are no available color ramps. You can add them in Style Manager.
Það eru engir tiltæki litastigar. Þú getur bætt þeim við í stílstjóranum.
- The selected color ramp is not available.
Valin litastigun er ekki tiltæk.
- Warning
- Viðvörun
+
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
-
- Renderer creation has failed.
-
@@ -26885,7 +26646,7 @@ Press cancel to abort breaks calculation or OK to continue.
Tab 1
-
Add new category using settings in GRASS Edit toolbox
-
Delete selected category
-
Set current region to selected map
-
Cannot copy map %1@%2
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot rename map %1
-
Information
- Upplýsingar
+
Remove the selected layer(s) from canvas before continue.
-
Question
-
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
-
+
Cannot delete map %1
-
Cannot write new region
-
@@ -27052,17 +26810,17 @@ Press cancel to abort breaks calculation or OK to continue.
You are not owner of the mapset, cannot open the vector for editing.
-
Cannot open vector for update.
- Get ekki opnað vigur til uppfærslu.
+
Edit tools
-
New boundary
-
Move element
-
Delete element
-
Edit attributes
-
Background
-
Highlight
-
Dynamic
-
Boundary (no area)
-
Boundary (1 area)
-
Boundary (2 areas)
-
Centroid (in area)
-
Centroid (outside area)
-
Centroid (duplicate in area)
-
Node (1 line)
-
Node (2 lines)
-
Next not used
-
Manual entry
-
No category
-
Info
-
The table was created
-
Tool not yet implemented.
-
Cannot check orphan record: %1
-
Orphan record was left in attribute table. <br>Delete the record?
-
Cannot delete orphan record:
-
Cannot describe table for field %1
-
Left: %1
-
-- Middle: %1
-
-- Right: %1
-
@@ -27268,7 +27026,7 @@ Press cancel to abort breaks calculation or OK to continue.
New vertex position
-
GRASS Edit
-
Category
-
Snapping in screen pixels
-
Marker size
-
Disp
-
Undo last vertex
-
<font color='red'>Enter a name!</font>
-
<font color='red'>This is name of the source!</font>
-
<font color='red'>Exists!</font>
-
Mapcalc tools
-
Add operator or function
-
Modulus
-
Exponentiation
-
Equal
-
Not equal
-
Greater than
-
Greater than or equal
-
Less than
-
Less than or equal
-
And
-
Or
-
Absolute value of x
-
Inverse tangent of x (result is in degrees)
-
Inverse tangent of y/x (result is in degrees)
-
Current column of moving window (starts with 1)
-
Cosine of x (x is in degrees)
-
Convert x to double-precision floating point
-
Current east-west resolution
-
Exponential function of x
-
x to the power y
-
Convert x to single-precision floating point
-
Decision: 1 if x not zero, 0 otherwise
-
Decision: a if x not zero, 0 otherwise
-
Decision: a if x not zero, b otherwise
-
Decision: a if x > 0, b if x is zero, c if x < 0
-
Check if x = NULL
-
Natural log of x
-
Log of x base b
-
Largest value
-
Median value
-
Smallest value
-
Mode value
-
1 if x is zero, 0 otherwise
-
Current north-south resolution
-
NULL value
-
Random value between a and b
-
Current row of moving window (Starts with 1)
-
Sine of x (x is in degrees)
sin(x)
-
Square root of x
sqrt(x)
-
Tangent of x (x is in degrees)
tan(x)
-
Current x-coordinate of moving window
-
Current y-coordinate of moving window
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot get region of map %1
-
No GRASS raster maps currently in QGIS
-
Cannot create 'mapcalc' directory in current mapset.
-
New mapcalc
-
Enter new mapcalc name:
-
Enter vector name
-
Save mapcalc
-
File name empty
-
Cannot open mapcalc file
-
The mapcalc schema (%1) not found.
-
Cannot open mapcalc schema (%1)
-
Cannot read mapcalc schema (%1):
-
Module: %1
-
The module file (%1) not found.
-
Cannot open module file (%1)
-
Cannot read module file (%1)
-
Module %1 not found
-
Cannot find man page %1
-
Please ensure you have the GRASS documentation installed.
-
Not available, description not found (%1)
-
Not available, cannot open description (%1)
-
Not available, incorrect description (%1)
-
Cannot get input region
-
Input %1 outside current region!
-
Use Input Region
-
Cannot find module %1
-
Cannot start module: %1
-
<B>Module crashed or killed</B>
-
@@ -28156,7 +27914,7 @@ at line %2 column %3
'layer' attribute in field tag with key= %1 is missing.
-
@@ -28194,17 +27952,17 @@ at line %2 column %3
Cannot find layeroption %1
-
Cannot find whereoption %1
-
Password
- Lykilorð
+
PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
-
Cannot find typeoption %1
-
Cannot find values for typeoption %1
-
Cannot find layeroption %1
-
GRASS element %1 not supported
-
Use region of this map
-
%1 (band %2)
-
Cannot get provider
-
Browse
- Fletta
+
Output file
-
GeoTIFF
-
Warning
- Viðvörun
+
Cannot parse version_min %1
-
Cannot find module %1
-
Cannot start module %1
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot read module description (%1):
-
Region
-
Input layers
-
Current map canvas
-
Cannot find key %1
-
<< Hide advanced options
-
Show advanced options >>
-
Item with key %1 not found
-
Item with id %1 not found
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
-
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
Cannot set region of map %1
-
@@ -28510,22 +28268,22 @@ at line %2 column %3
No writable locations, the database is not writable!
-
Enter location name!
-
The location exists!
-
Selected projection is not supported by GRASS!
-
Cannot create projection.
-
Cannot reproject previously set region, default region set.
-
North must be greater than south
-
East must be greater than west
-
Regions file (%1) not found.
-
Cannot open locations file (%1)
-
Cannot read locations file (%1):
-
Cannot create QgsCoordinateReferenceSystem
-
Cannot reproject selected region.
-
Cannot reproject region
-
Create mapset
-
Cannot open DEFAULT_WIND
-
Cannot open WIND
-
New mapset successfully created, but cannot be opened: %1
-
New mapset successfully created and set as current working mapset.
-
@@ -28701,16 +28459,16 @@ at line %2 column %3
Example directory tree:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
-
Default GRASS Region
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
-
Set
-
Region Error
-
New mapset:
-
Mapset Error
-
<p align="center">Existing mapsets</p>
-
Owner
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
-
Create New Mapset
-
Plugins
- Viðbætur
+
Open Mapset
-
New Mapset
- Nýtt kortasafn
+
Close Mapset
-
Add GRASS Vector Layer
-
Open GRASS Tools
-
Create New Grass Vector
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open GRASS vector:
%1
-
New vector created but cannot be opened by data provider.
-
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
cellhd file %1 does not exist
-
Format not supported
-
Cannot read data
-
@@ -29160,7 +28918,7 @@ p, li { white-space: pre-wrap; }
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
GRASS Region Settings
-
Select the extent by dragging on canvas
or change the following values
-
Select GRASS mapcalc schema
-
Choose existing GISDBASE
-
Wrong GISDBASE, no locations available.
-
Wrong GISDBASE
-
Select or type map name (wildcards '*' and '?' accepted for rasters)
-
Warning
- Viðvörun
+
Cannot rename the lock file %1
-
@@ -29394,32 +29152,32 @@ or change the following values
GRASS Direct Tools
-
Modules Tree
- Tré eininga
+
Modules List
- Listi eininga
+
Browser
-
Direct Modules Tree
-
Direct Modules List
-
Direct Modules Tree
-
Direct Modules List
-
@@ -29507,60 +29265,60 @@ at line %2 column %3
Add feature
- Bæta við fitju
+
Start editing failed
- Það mistókst að hefja breytingar
+
Provider cannot be opened for editing
-
Stop editing
- Hætta að breyta
+
Do you want to save the changes to layer %1?
-
Error
- Villa
+
Problems during roll back
-
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
-
Show more
-
@@ -29583,12 +29341,12 @@ at line %2 column %3
Provider
-
Datasource
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -29637,7 +29392,7 @@ at line %2 column %3
Handle bad layers
-
@@ -29645,12 +29400,12 @@ at line %2 column %3
Handle bad layers
-
%1 of %2 bad layers were not fixable.
-
@@ -29658,7 +29413,7 @@ at line %2 column %3
QGIS Help
- QGIS hjálp
+
@@ -29671,7 +29426,7 @@ at line %2 column %3
about:blank
-
@@ -29679,17 +29434,17 @@ at line %2 column %3
HTML annotation
-
Delete
- Eyða
+
html
-
@@ -29759,10 +29514,7 @@ at line %2 column %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Netsambandi lauk óeðlilega eftir %n sekúndu án svars. Það getur verið vandamál í nettenginunni þinni við WMS þjóninn.
- Netsambandi lauk óeðlilega eftir %n sekúndur án svars. Það getur verið vandamál í nettenginunni þinni við WMS þjóninn.
-
+ Netsambandi lauk óeðlilega eftir %n sekúndu án svars. Það getur verið vandamál í nettenginunni þinni við WMS þjóninn. Netsambandi lauk óeðlilega eftir %n sekúndur án svars. Það getur verið vandamál í nettenginunni þinni við WMS þjóninn.
@@ -29788,27 +29540,27 @@ This may be a problem in your network connection or at the WMS server.
Layer
- Lag
+
FID
-
Attribute
- Eigind
+
Value
- Gildi
+
Expand tree.
-
...
- ...
+
Clear Results
-
Help
- Hjálp
+
Select identify mode
-
Mode
- Hamur
+
Select view mode for raster layers
-
View
- Skoða
+
Auto open form
-
Collapse tree.
-
New results will be expanded by default.
-
Copy selected feature to clipboard.
-
Identify Results
- Kenna niðurstöður
+
Feature
- Fitja
+
Value
- Gildi
+
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
(Derived)
-
(Actions)
-
Edit feature form
-
Table
- Tafla
+
Tree
- Tré
+
Graph
-
feature id
- Kenni fitju
+
Format
-
No attributes.
-
Zoom to feature
- Þysja á fitju
+
Copy feature
-
Toggle feature selection
-
Copy attribute value
-
Copy feature attributes
-
Copy GetFeatureInfo request URL
-
Highlight all
-
Highlight layer
-
Activate layer
-
Layer properties...
-
Expand all
-
Collapse all
-
Attributes changed
- Eigind breytt
+
Cannot print
-
Cannot print this item
-
@@ -30062,7 +29814,7 @@ This may be a problem in your network connection or at the WMS server.
Print
-
@@ -30070,7 +29822,7 @@ This may be a problem in your network connection or at the WMS server.
Loading...
-
@@ -30087,45 +29839,45 @@ This may be a problem in your network connection or at the WMS server.
Triangular interpolation (TIN)
-
Inverse Distance Weighting (IDW)
-
No input data for interpolation
-
Please add one or more input layers
-
Output file name invalid
-
Please enter a valid output file name
-
Break lines
-
Structure lines
-
Save interpolated raster as...
-
@@ -30158,12 +29910,12 @@ This may be a problem in your network connection or at the WMS server.
Interpolation attribute
-
Use z-Coordinate for interpolation
-
Cellsize X
-
Cellsize Y
-
Set to current extent
-
Add result to project
- Bæta við niðurstöðu í verkefni
+
@@ -30278,7 +30030,7 @@ This may be a problem in your network connection or at the WMS server.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -30286,17 +30038,17 @@ This may be a problem in your network connection or at the WMS server.
Form
- Form
+
Sub renderer:
-
Merge polygons before rendering (slow)
-
@@ -30615,7 +30367,7 @@ This may be a problem in your network connection or at the WMS server.
Expression result
-
Available typeface styles
-
Style
- Stíll
+
Underlined text
-
U
-
Strikeout text
-
S
- S
+
Bold text
(data defined only, overrides Style)
-
B
- B
+
Italic text
(data defined only, overrides Style)
-
I
- I
+
Display
- Birta
+
Scale-based
-
Min
-
Show label
-
Ignores priority and permits collisions/overlaps
-
Always show (exceptions above)
-
points
-
map units
- mælieining korts
+
mm
- mm
+
% of length
-
%1 not found. Default substituted.
-
Chosen font
-
string
-
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
-
int [0-2000]
-
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
-
int [1-10000]
-
Text/Buffer sample
-
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
No change
-
All uppercase
-
All lowercase
-
Capitalize first letter
-
Size%1
-
X
-
File not found
-
@@ -30954,9 +30706,9 @@ This may be a problem in your network connection or at the WMS server.
Stillingar merkja á lagi
- Label this layer with
-
...
...
@@ -31057,97 +30809,97 @@ This may be a problem in your network connection or at the WMS server.
Lorem Ipsum
-
Sample text
-
Reset sample text
-
Size for sample text in map units
-
Sample background color
-
Line direction symbol
-
Formatted numbers
-
Decimal places
-
Show plus sign
-
Multiple lines
-
- Automated placement settings (apply to all layers)
-
Text/Buffer Sample
-
Text
- Texti
+
Formatting
-
Shadow
-
Rendering
-
letter
-
Spacing
-
Blend mode
-
word
-
Underlined text
-
Bold text
(data defined only, overrides Style)
-
B
- B
+
Italic text
(data defined only, overrides Style)
-
I
- I
+
Font is missing.
-
Text formatting
-
Wrap on character
-
Line height
-
Line height spacing for multi-line text
-
line
-
Alignment
-
Paragraph style alignment of multi-line text
-
Left
-
Center
- miðjað
+
Right
-
Force point inside polygon
-
Repeat
-
- Discourage labels from covering features
-
Available typeface styles
-
U
-
Strikeout text
-
S
- S
+
Style
- Stíll
+
Transparency
- Gagnsæi
+
%
-
Capitalization style of text
-
Space in pixels or map units, relative to size unit choice
-
Type case
-
Textabakgrunnur
- Labels will not show if larger than this on screen
-
- px
-
- Data defined
-
- X
-
- Y
-
- Coordinate
-
- Preserve data rotation values
-
- horizontal
-
- vertical
-
- Label options
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
- Maximum
Hámark
- Pixel size-based visibility (labels in map units)
-
- Labels will not show if smaller than this on screen
-
- Minimum
Lágmark
<
- <
+
- Scale-based visibility
-
>
- >
+
left/right
-
above
-
below
-
Reverse direction
-
- Priority
-
- Low
Lágt
- High
Hátt
Around point
-
Offset from point
-
Parallel
-
Curved
-
Text buffer
-
Draw text buffer
-
Color buffer's fill
-
Draw background
-
Size X
-
Size type
-
Size Y
-
Fill color
-
Border color
-
Draw drop shadow
-
Blur radius
-
Blur only alpha pixels
-
Label's rotation is ignored
-
Use global shadow
-
˚
-
Lowest label component
-
Draw under
-
Horizontal
- Lárétt
+
Offset from centroid
-
Around centroid
-
Horizontal (slow)
-
Free (slow)
-
Using perimeter
-
visible polygon
-
whole polygon
-
Rotation
Snúningur
Above line
-
On line
-
Below line
-
Line orientation dependent position
-
Centroid
-
abc
-
Quadrant
-
Distance
-
- outside
-
- inside
-
- Maximum angle between curved characters
Hámarks hort milli sveigðra stafa
@@ -31709,22 +31461,22 @@ This may be a problem in your network connection or at the WMS server.
Pen join style
-
Drop shadow
-
Offset
- Hliðrun
+
Scale
- Skali
+
Background
-
Load symbol parameters
-
Fixed
-
Offset X,Y
- Hliðrun X,Y
+
Rectangle
- Rétthyrningur
+
Square
- Ferkantað
+
Ellipse
- Sporbaugur
+
Circle
-
SVG
-
Shape
-
Sync with label
-
Offset of label
-
Radius X,Y
-
Border width
- Þykkt jaðars
+
symbol units
-
- Merge connected lines to avoid duplicate labels
Sameina tengdar línur til að koma í veg fyrir fjölföldun merkja
- Label every part of multi-part features
Merkja alla hluta marghluta fitju
- Feature options
-
- Suppress labeling of features smaller than
-
- mm
mm
- Show all labels for this layer (including colliding labels)
-
- Show upside-down labels
-
- never
-
- when rotation defined
-
- always
alltaf
- Limit number of features to be labeled to
-
- Number of features sent to labeling engine, though not all may be labeled
-
Staðsetning
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
Alltaf sýna
- Show label
-
@@ -31892,21 +31644,21 @@ This may be a problem in your network connection or at the WMS server.
Outline: %1
-
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -31914,60 +31666,60 @@ not displayed
&Add Group
-
&Remove
- &Fjarlægja
+
&Show in overview
-
Re&name
- &Endurskýra
+
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
QgsLegendModel
- Group
Hópur
- No Legend Available
-
@@ -31976,33 +31728,33 @@ not displayed
Millimeter
-
Map unit
-
Angle
- Horn
+
Distance
-
Line width
- Breidd línu
+
Color
- Litur
+
@@ -32010,12 +31762,12 @@ not displayed
Styles related to the layer
-
Other styles on the database
-
Load Style
-
@@ -32044,12 +31796,12 @@ not displayed
Select connections to import
-
Import
- Innlestur
+
Export/import error
- Innlestrar/útlestrarvilla
+
You should select at least one connection from list.
-
The file is not an WMS connections exchange file.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an PostGIS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Select connections to export
-
QgsMapCanvas
- canvas
-
- Rendering
-
- Canvas refresh: %1 ms
-
@@ -32226,17 +31978,17 @@ not displayed
Enter X and Y coordinates (DMS (dd mm ss.ss), DD (dd.dd) or projected coordinates (mmmm.mm)) which correspond with the selected point on the image. Alternatively, click the button with icon of a pencil and then click a corresponding point on map canvas of QGIS to fill in coordinates of that point.
-
X / East:
-
Y / North:
-
Specify CRS for layer %1
-
Error: qgis element could not be found in %1
-
Style not found in database
-
ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
Unable to open file %1
-
@@ -32349,13 +32101,13 @@ not displayed
Transform error caught: %1
-
CRS
-
@@ -32373,7 +32125,7 @@ not displayed
The data provider for this layer does not support the addition of features.
-
Cannot apply the 'capture point' tool on this vector layer
-
Cannot transform the point to the layers coordinate system
-
Cannot apply the 'capture line' tool on this vector layer
-
Cannot apply the 'capture polygon' tool on this vector layer
-
Cannot add feature. Unknown WKB type
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
@@ -32451,53 +32203,53 @@ not displayed
No feature selected. Please select a feature with the selection tool or in the attribute table
-
Several features are selected. Please select only one feature to which an part should be added.
-
Part added
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected feature is not multi part.
-
New part's geometry is not valid.
-
New polygon ring not disjoint with existing polygons.
-
Several features are selected. Please select only one feature to which an island should be added.
-
Selected geometry could not be found
-
@@ -32505,12 +32257,12 @@ not displayed
Coordinate transform error
- Villa tengd vörpun hnita
+
Cannot transform the point to the layers coordinate system
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32558,12 +32310,12 @@ not displayed
Validation started.
-
Validation finished.
-
@@ -32571,7 +32323,7 @@ not displayed
Changed properties for label
-
@@ -32592,12 +32344,12 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
No active vector layer
- Ekkert virkt vigurlag
+
Layer not editable
- Lag er óbreytanlegt
+
@@ -32624,27 +32376,27 @@ not displayed
No active vector layer
- Ekkert virkt vigurlag
+
To run an action, you must choose a vector layer by clicking on its name in the legend
-
No actions available
-
The active vector layer has no defined actions
-
No features at this position found.
-
@@ -32652,52 +32404,52 @@ not displayed
Coordinate transform error
- Villa tengd vörpun hnita
+
Cannot transform the point to the layers coordinate system
-
Ring added and filled
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32705,28 +32457,28 @@ not displayed
All (%1)
-
No active layer. To identify features, you must choose an active layer.
-
Identifying on %1...
-
Identifying done.
-
(clicked coordinate)
-
Perimeter
-
no data
-
Identify error
-
@@ -32797,7 +32549,7 @@ not displayed
No features at this position found.
-
@@ -32813,7 +32565,7 @@ not displayed
Moved label
-
@@ -32821,7 +32573,7 @@ not displayed
could not snap to a segment on the current layer.
-
Offset curve
-
Offset:
-
Creating offset geometry failed
-
@@ -32857,12 +32609,12 @@ not displayed
Pinned label
-
Unpinned label
-
@@ -32870,17 +32622,17 @@ not displayed
Coordinate transform error
- Villa tengd vörpun hnita
+
Cannot transform the point to the layers coordinate system
-
Reshape
-
@@ -32888,7 +32640,7 @@ not displayed
Features Rotated
-
@@ -32896,7 +32648,7 @@ not displayed
Rotated label
-
@@ -32932,12 +32684,12 @@ not displayed
Hid labels
-
Showed labels
-
@@ -32969,12 +32721,12 @@ not displayed
Coordinate transform error
- Villa tengd vörpun hnita
+
Cannot transform the point to the layers coordinate system
-
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
@@ -33019,53 +32771,53 @@ not displayed
Coordinate transform error
- Villa tengd vörpun hnita
+
Cannot transform the point to the layers coordinate system
-
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Split error
-
@@ -33073,22 +32825,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
@@ -33098,39 +32850,39 @@ not displayed
Millimeter
-
Map unit
-
Interval
-
Line offset
- Hliðrun línu
+
Placement
- Staðsetning
+
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -33161,22 +32913,22 @@ not displayed
The calculations are based on:
-
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
@@ -33253,12 +33005,12 @@ not displayed
Date
-
Whole number (smallint - 16bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (double)
- Rauntölur
+
Text, unlimited length (text)
-
@@ -33296,7 +33048,7 @@ not displayed
Skip attribute
-
Feature %1
-
Sum
- Samtals
+
Skipped
-
@@ -33372,26 +33124,23 @@ not displayed
Remaining messages
-
Close all
-
Close
- Loka
+
%n more
unread messages
-
-
+
@@ -33399,38 +33148,38 @@ not displayed
QGIS Log
-
No messages.
-
%1 message(s) logged.
-
General
- Almennt
+
Timestamp
-
Message
-
Level
-
@@ -33451,46 +33200,46 @@ not displayed
Show non-spatial tables
-
Edit...
-
Delete
- Eyða
+
%1: Not a vector layer!
-
%1: OK!
-
Import to MSSQL database
-
Failed to import some layers!
-
Import was successful.
-
@@ -33498,13 +33247,13 @@ not displayed
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Should the existing connection %1 be overwritten?
- Á að skrifa yfir eldri tengingu %1?
+
Test connection
- Prófa tengingu
+
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
-
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
-
Connection to %1 was successful
- Tenging %1 tókst
+
@@ -33549,47 +33298,47 @@ not displayed
Create a New MSSQL connection
-
Connection Information
- Upplýsingar um tengingu
+
Name
- Nafn
+
Provider/DSN
-
Host
- Þjónn
+
Database
- Gagnagrunnur
+
Username
- Notanafn
+
Password
- Lykilorð
+
Name of the new connection
- Nafn á nýja tengingu
+
Save Username
- Vista notandanafn
+
Save Password
- Vista lykilorð
+
Only look in the geometry_columns metadata table
-
Also list tables with no geometry
- Byrta líka töflur án landupplýsinga
+
Use estimated table parameters
-
@@ -33652,52 +33401,52 @@ not displayed
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
- Rauntölur (real)
+
Decimal number (double)
- Rauntölur
+
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length (text)
-
Text, unlimited length unicode (ntext)
-
@@ -33713,12 +33462,12 @@ not displayed
%1 as %2 in %3
-
as geometryless table
-
@@ -33726,64 +33475,64 @@ not displayed
Add MSSQL Table(s)
-
&Add
- &Bæta við
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
- Allt
+
Schema
- Skema
+
Table
- Tafla
+
Type
- Tegund
+
Geometry column
-
Sql
- Sql
+
Are you sure you want to remove the %1 connection and all associated settings?
- Ertu viss um að þú viljir fjarlægja %1 tenginguna og viðkomandi stillingar?
+
Confirm Delete
- Staðfesta eyðingu
+
XML files (*.xml *XML)
- XML skrár (*.xml *.XML)
+
You must select a table in order to add a layer.
- Þú verður að velja töflu til að geta bætt við lagi.
+
MSSQL Provider
-
Stop
- Stöðva
+
Select...
- Velja...
+
@@ -33863,22 +33612,22 @@ not displayed
Schema
- Skema
+
Table
- Tafla
+
Type
- Tegund
+
Geometry column
-
Select at id
-
Sql
- Sql
+
Detecting...
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Enter...
-
Point
- Punktur
+
Multipoint
- Fjölpunkta
+
Line
- Lína
+
Multiline
- Fjöllínu
+
Polygon
-
Multipolygon
- Fjölmarghyrningur
+
No Geometry
-
Unknown Geometry
-
@@ -33971,12 +33720,12 @@ not displayed
Not set
- Ekki skilgreint
+
No enhancement
-
Red
-
Green
-
Blue
-
@@ -34014,35 +33763,35 @@ not displayed
Form
- Form
+
Contrast
enhancement
-
Min/max
-
Red band
-
Green band
-
Blue band
-
@@ -34050,12 +33799,12 @@ enhancement
Network request %1 timed out
-
Network
-
@@ -34063,7 +33812,7 @@ enhancement
Cannot find boundary in multipart content type
-
@@ -34076,37 +33825,37 @@ enhancement
all
-
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
Saving passwords
-
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
@@ -34145,7 +33894,7 @@ Note: giving the password is optional. It will be requested interactivly, when n
DPI-Mode
-
Ignore GetFeatureInfo URI reported in capabilities
-
Ignore GetMap/GetTile URI reported in capabilities
-
Ignore axis orientation (WMS 1.3/WMTS)
-
Invert axis orientation
-
Smooth pixmap transform
-
Referer
-
@@ -34263,7 +34012,7 @@ Frekari villuupplýsingar:
Type
- Tegund
+
SpatiaLite
-
Unable to open the database
-
Error
- Villa
+
@
-
Error Creating SpatiaLite Table
-
Failed to create the SpatiaLite table %1. The database returned:
%2
-
Error Creating Geometry Column
-
Failed to create the geometry column. The database returned:
%1
-
Error Creating Spatial Index
-
Failed to create the spatial index. The database returned:
%1
-
Spatial Reference Id
-
Specify the coordinate reference system of the layer's geometry.
- Tilgreinið hnitviðmiðskerfi fyrir hnitakerfi lagsins.
+
Specify CRS
- Tilgreindu hnitviðmiðskerfi (CRS)
+
Create an autoincrementing primary key
-
Remove attribute
-
@@ -34589,7 +34338,7 @@ Frekari villuupplýsingar:
Date
-
Comma Separated Value
-
GML
-
Mapinfo File
-
Save layer as...
- Vista lag sem...
+
@@ -34699,7 +34448,7 @@ Frekari villuupplýsingar:
Remove attribute
-
File encoding
-
@@ -34723,17 +34472,17 @@ Frekari villuupplýsingar:
No query has been specified.
-
There is already a pending request for data.
-
Cannot open output file: %1
-
@@ -34741,47 +34490,47 @@ Frekari villuupplýsingar:
Download OpenStreetMap data
-
Extent
-
From map canvas
- Frá striga korts
+
From layer
-
Manual
- Handvirkt
+
Output file
-
...
- ...
+
OpenStreetMap files (*.osm)
-
Download error
-
OpenStreetMap download
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -34824,95 +34573,95 @@ Frekari villuupplýsingar:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
...
- ...
+
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Polygons (closed ways)
-
Output layer name
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
- &Setja á strigann þegar lokið
+
Tag
-
Count
-
SQLite databases (*.db)
-
Unable to open database:
%1
-
OpenStreetMap export
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -34920,50 +34669,50 @@ Frekari villuupplýsingar:
OpenStreetMap Import
-
Input XML file (.osm)
-
...
- ...
+
Output SpatiaLite DB file
-
Create connection (SpatiaLite) after import
-
Connection name
-
OpenStreetMap files (*.osm)
-
SQLite databases (*.db)
-
OpenStreetMap import
-
Failed to import OSM data:
%1
-
Import has been successful.
-
@@ -34987,12 +34736,12 @@ Frekari villuupplýsingar:
WMS Password for %1
-
Password
- Lykilorð
+
@@ -35000,12 +34749,12 @@ Frekari villuupplýsingar:
Edit...
-
Delete
- Eyða
+
@@ -35021,17 +34770,17 @@ Frekari villuupplýsingar:
Add Layer(s) from a %1 Server
-
&Add
- &Bæta við
+
Add selected layers to map
-
Prefer cache
-
Prefer network
-
Always network
-
Are you sure you want to remove the %1 connection and all associated settings?
- Ertu viss um að þú viljir fjarlægja %1 tenginguna og viðkomandi stillingar?
+
Confirm Delete
- Staðfesta eyðingu
+
Load connections
-
XML files (*.xml *XML)
- XML skrár (*.xml *.XML)
+
Coordinate Reference System (%n available)
crs count
-
-
+
Coordinate Reference System
- Hnitviðmiðskerfi
+
Could not understand the response:
%1
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
@@ -35119,115 +34865,115 @@ Frekari villuupplýsingar:
Add Layer(s) from a Server
-
Ready
- Tilbúin
+
Layers
-
C&onnect
- &Tengja
+
&New
- &Nýtt
+
Edit
- Breyta
+
Delete
- Eyða
+
Load connections from file
- Lesa inn tengingar frá skrá
+
Load
- Lesa inn
+
Save connections to file
- Vista tengingar í skrá
+
Save
- Vista
+
Adds a few example WMS servers
-
Add default servers
-
ID
- Kenni
+
Name
- Nafn
+
Title
- Titill
+
Abstract
- Útdráttur
+
Time
- Tími
+
Coordinate Reference System:
-
Selected Coordinate Reference System
-
Change ...
- Breyta...
+
Format
-
Layer name
- Nafn lags
+
Tile size
-
Feature limit for GetFeatureInfo
-
Cache
- Skyndiminni
+
Layer Order
-
Move selected layer UP
-
Up
- Upp
+
Move selected layer DOWN
-
Down
- Niður
+
Layer
- Lag
+
Style
- Stíll
+
Tilesets
-
Styles
-
Size
- Stærð
+
CRS
-
Server Search
-
Search
- Leita
+
Description
- Lýsing
+
URL
- URL
+
Add selected row to WMS list
-
@@ -35354,13 +35100,13 @@ Always network: always load from network and do not check if the cache has a val
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
-
Unable to activate FOREIGN_KEY constraints
-
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Offline Editing Plugin
-
Could not open the spatialite logging database
-
@@ -35400,12 +35146,12 @@ Always network: always load from network and do not check if the cache has a val
Convert to offline project
-
Create offline copies of selected layers and save as offline project
-
&Offline Editing
-
Synchronize offline project with remote layers
-
Converting to offline project
-
Synchronizing to remote layers
-
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -35476,27 +35222,27 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
-
SpatiaLite DB
-
All files
- Allar skrár
+
Offline Editing Plugin
-
Converting to offline project.
-
Create offline project
-
Offline data
-
Select remote layers
-
Couldn't open file %1.prj
-
OGR
-
Couldn't open file %1.qpj
-
@@ -35577,7 +35323,7 @@ Always network: always load from network and do not check if the cache has a val
Data source is invalid, no layer found (%1)
-
OGR
-
Data source is invalid (%1)
-
Date
-
Date & Time
-
OGR[%1] error %2: %3
-
Unknown
-
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
type %1 for field %2 not found
-
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
Feature %1 for attribute update not found.
-
Field %1 of feature %2 doesn't exist.
-
Type %1 of attribute %2 of feature %3 unknown.
-
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
Shapefiles without attribute are considered read-only.
-
@@ -35804,7 +35550,7 @@ Always network: always load from network and do not check if the cache has a val
Open an OGR Supported Vector Layer
-
No protocol URI entered.
-
Options Dialog Template
-
GroupBox
-
@@ -35965,17 +35711,17 @@ Always network: always load from network and do not check if the cache has a val
Identify highlight color
-
not present
-
System value: %1
-
If needed
-
Never
-
Load all
-
Check file contents
-
Check extension
-
No
- Nei
+
Basic scan
-
Full scan
-
Cumulative pixel count cut
-
Mean +/- standard deviation
-
Select grid color
- Velja lit á net
+
Solid
- Heilt
+
Dots
-
Crosses
- Krossar
+
- Detected active locale on your system: %1
-
- To vertex
Til hornpunkts
- To segment
Til hluta
- To vertex and segment
Til hornpunts eða hluta
- map units
mælieining korts
- pixels
punktar
- Semi transparent circle
-
- Cross
Kross
- None
Ekkert
- QGIS files
-
- Off
-
-
- QGIS
- QGIS
+
QGIS
+
+
+ GEOS
-
- Round
-
- Mitre
-
- Bevel
- Halli
+
- Save default project
-
- You must set a default project
-
- Current project saved as default
-
- Error saving current project as default
-
- Choose a directory to store project template files
-
Show features visible on map
-
- Choose project file to open at launch
-
- Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
-
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
Yfirskrifa
- If Undefined
-
- Unset
-
- Prepend
-
- Append
-
- Choose a directory
-
- Enter scale
-
- Scale denominator
-
- Load scales
-
- XML files (*.xml *.XML)
- XML skrár (*.xml *.XML)
+
- Save scales
-
- No Stretch
-
- Stretch To MinMax
Strekkja í lágmark/hámark
- Stretch And Clip To MinMax
Strekkja og klippa að lágmark/hámark
- Clip To MinMax
Klippa að Lágmark/Hámark
None / Planimetric
-
@@ -36316,7 +36062,7 @@ Always network: always load from network and do not check if the cache has a val
General
Almennt
@@ -36324,43 +36070,43 @@ Always network: always load from network and do not check if the cache has a val
System
-
Data Sources
-
Data sources
-
Rendering
-
Canvas & Legend
-
Canvas and legend
-
Map Tools
-
Map tools
-
GDAL
-
CRS
-
Locale
-
Network
-
Style <i>(QGIS restart required)</i>
-
Icon theme
-
Icon size
-
16
- 16
+
24
- 24
+
32
- 32
+
Font
- Leturgerð
+
Qt default
-
Timeout for timed messages or dialogs
-
s
-
Hide splash screen at startup
-
Show tips at start up
-
Bold group box titles
-
QGIS-styled group boxes
-
Project files
-
New
- Nýtt
+
Most recent
-
Specific
-
...
...
Open project on launch
-
Create new project from default project
-
Set current project as default
-
Reset default
-
Template folder
-
Browse
- Fletta
+
Reset
- Endursetja
+
Prompt to save project and data source changes when required
-
Prompt for confirmation when a layer is to be removed
-
Warn when opening a project file saved with an older version of QGIS
-
Enable macros
-
Never
-
Ask
-
For this session only
-
QSettings
-
Reset the User Interface settings, to reset QGIS to it's default view
-
Environment
-
Apply
-
Variable
-
Value
- Gildi
+
Remove
Fjarlægja
@@ -36623,184 +36369,184 @@ Always network: always load from network and do not check if the cache has a val
Add
Bæta við
Current environment variables (read-only - bold indicates modified at startup)
-
Show only QGIS-specific variables
-
Use custom variables (restart required - include separators)
-
Plugin paths
-
Path(s) to search for additional C++ plugins libraries
-
SVG paths
-
Path(s) to search for Scalable Vector Graphic (SVG) symbols
-
Feature attributes and table
-
Open attribute table in a dock window (QGIS restart required)
-
Copy geometry in WKT representation from attribute table
-
Attribute table behaviour
-
Attribute table row cache
-
Representation for NULL values
-
Data source handling
-
Scan for valid items in the browser dock
-
Scan for contents of compressed files (.zip) in browser dock
-
Prompt for raster sublayers when opening
-
Add PostGIS layers with double click and select in extended mode
-
Rendering behavior
-
By default new la&yers added to the map should be displayed
-
Use render caching where possible to speed up redraws
-
Render layers in parallel using many CPU cores
-
Max cores to use:
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Rendering quality
-
Make lines appear less jagged at the expense of some drawing performance
-
Rasters
-
RGB band selection
-
Red band
-
Green band
-
Blue band
-
Contrast enhancement
-
Single band gray
-
Multi band color (byte / band)
-
Multi band color (> byte / band)
-
Cumulative pixel count cut limits
-
-
- -
+
Standard deviation multiplier
-
Debugging
-
Show these events in the Log Message panel (under Rendering tab)
-
Map canvas refresh
-
Default map appearance (overridden by project properties)
-
Highlight color
-
<html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
Buffer
- Textabakgrunnur
+
Lines / outlines buffer in millimeters.
-
Minimum width
-
Minimum line / outline width in millimeters.
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
-
-
- Suppress attribute form pop-up after feature creation
-
Use live-updating color chooser dialogs
-
Ignore shapefile encoding declaration
-
Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
Composer
- Smiður
+
Custom side bar style
-
Add Oracle layers with double click and select in extended mode
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
Simplify on provider side if possible
-
Layer legend
-
Double click action in legend
-
Open layer properties
-
Open attribute table
-
Capitalise layer names
-
Bold layer names
-
Display classification attribute names
-
Bold group names
-
Create raster icons (may be slow)
-
Legend item styles
-
WMS getLegendGraphic Resolution
-
Identify
-
<b>Note:</b> Specify the search radius as a percentage of the map width
-
Search radius for identifying features and displaying map tips
-
Rubberband color
-
Nautical Miles
-
Preferred angle units
-
Degrees
-
Map update interval
-
ms
-
Enable feature simplification by default for newly added layers
-
Radians
-
Decimal places
-
Keep base unit
-
Gon
-
Panning and zooming
-
Zoom factor
-
Mouse wheel action
-
Zoom and recenter
-
Zoom to mouse cursor
-
Nothing
-
Predefined scales
-
Add predefined scale
-
Remove selected
-
Insert default scales
-
Import from file
-
Export to file
-
Composition defaults
-
Default font
-
Grid appearance
-
Grid style
-
Color...
-
+
+ Grid defaults
+
+
+ Spacing
+
mm
- mm
+
Grid offset
-
x:
-
y:
-
Snap tolerance
Grips þolvik
- Guide defaults
+
+
+ Feature creation
-
- Validate geometries
-
- Reuse last entered attribute values
-
- Rubberband
-
- Line color
Línulitur
- Line width in pixels
Breidd línu í skjápunktum
- Line width
Breidd línu
- Snapping
Smellur
- Default snap mode
Sjálfgefin smelluhamur
- Default snapping tolerance
Sjálfgefin þolvik smella
- Search radius for vertex edits
Leitar radíus fyrir breytingu brotpunkta
- map units
mælieining korts
pixels
punktar
- Open snapping options in a dock window (QGIS restart required)
Opna valkosti grips í glugga (Endurræsa þarf QGIS)
- Vertex markers
-
- Marker style
-
- Marker size
-
- Show markers only for selected features
-
-
- Curve offset tool
-
-
- Miter limit
-
-
- Join style
- Stíll sameiningar
+
Curve offset tool
+
+
+ Miter limit
+
+
+ Join style
+
+
+ Quadrant segments
-
- GDAL driver options
-
- Edit Pyramids Options
-
-
- Edit Create Options
-
-
- GDAL drivers
-
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
-
Name
- Nafn
-
-
- ext
- Edit Create Options
+
GDAL drivers
+
+
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+
+
+ Name
+
+
+ ext
+
+
+ Flags
-
- Description
- Lýsing
+
- CRS for new layers
-
- Select...
Velja...
- Use &project CRS
-
- Prompt for &CRS
-
- Use default CRS displa&yed below
-
- When a new layer is created, or when a layer is loaded that has no CRS
-
- Default CRS for new projects
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
- Always start new projects with this CRS
-
- Enable 'on the &fly' reprojection by default
-
- Don't enable 'on the fly' reprojection
-
- Default datum transformations
-
- Source CRS
-
- Destination CRS
-
- Source datum transform
-
- Destination datum transform
-
- Ask for datum transformation when no default is defined
-
- Override system locale
-
- Locale to use instead
-
- <b>Note:</b> Enabling / changing overide on local requires an application restart
-
- Additional Info
-
- Detected active locale on your system:
-
- WMS search address
-
- Timeout for network requests (ms)
-
- Default expiration period for WMS-C/WMTS tiles (hours)
-
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
Cache settings
- Max retry in case of tile request errors
+
- User-Agent
+
+
+ Cache settings
+
+
+ Directory
Skráarsafn
- Size [KiB]
-
- Clear
Hreinsa
- Use proxy for web access
-
- Host
Þjónn
- Port
Tengi
- User
-
- Leave this blank if no proxy username / password are required
-
- Password
Lykilorð
- Proxy type
-
- Exclude URLs (starting with)
-
@@ -37588,7 +37337,7 @@ Always network: always load from network and do not check if the cache has a val
Missing objects
-
@@ -37604,17 +37353,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -37622,7 +37371,7 @@ Missing some of the .ui template objects:
Connection to database failed
-
Oracle
-
SQL:%1
error:%2
-
Database connection was successful, but the accessible tables could not be determined.
-
Unable to get list of spatially enabled tables from the database
-
Unsupported geometry type %1 in %2.%3.%4 ignored
-
Point
- Punktur
+
Multipoint
- Fjölpunkta
+
Line
- Lína
+
Multiline
- Fjöllínu
+
Polygon
-
Multipolygon
- Fjölmarghyrningur
+
No Geometry
-
Unknown Geometry
-
@@ -37718,61 +37467,61 @@ error:%2
Edit...
-
Delete
- Eyða
+
Refresh
- Hressa
+
Copying features...
-
Abort
- Hætta við
+
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to Oracle database
-
Failed to import some layers!
-
Import was successful.
-
@@ -37782,12 +37531,12 @@ error:%2
Delete layer
-
Layer deleted successfully.
-
@@ -37795,41 +37544,41 @@ error:%2
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
- Vista tengingu
+
Should the existing connection %1 be overwritten?
- Á að skrifa yfir eldri tengingu %1?
+
Test connection
- Prófa tengingu
+
Connection to %1 was successful
- Tenging %1 tókst
+
Connection failed - Check settings and try again.
-
@@ -37837,128 +37586,128 @@ error:%2
Create a New Oracle connection
-
Connection Information
- Upplýsingar um tengingu
+
Password
- Lykilorð
+
Save Username
- Vista notandanafn
+
Username
- Notanafn
+
Name of the new connection
- Nafn á nýja tengingu
+
Database
- Gagnagrunnur
+
Name
- Nafn
+
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
Also list tables with no geometry
- Byrta líka töflur án landupplýsinga
+
Port
- Tengi
+
1521
- 1521
+
&Test Connect
-
Save Password
- Vista lykilorð
+
Host
- Þjónn
+
Use estimated table statistics for the layer metadata.
-
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Use estimated table metadata
-
@@ -37966,12 +37715,12 @@ error:%2
%1 as %2 in %3
-
as geometryless table
-
@@ -37984,7 +37733,7 @@ error:%2
Add a Oracle Spatial GeoRaster...
-
@@ -37992,52 +37741,52 @@ error:%2
Whole number
- Heilar tölur
+
Whole big number
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
- Rauntölur (real)
+
Decimal number (double)
- Rauntölur
+
Text, fixed length (char)
-
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
-
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
-
Key field '%1' for view not found.
-
No key field for view given.
-
No key field for query given.
-
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle error: %1
SQL: %2
Error: %3
-
New Connection...
-
@@ -38531,64 +38280,64 @@ Villa: %2
Add Oracle Table(s)
-
&Add
- &Bæta við
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
- Allt
+
Owner
-
Table
- Tafla
+
Type
- Tegund
+
Geometry column
-
Sql
- Sql
+
Are you sure you want to remove the %1 connection and all associated settings?
- Ertu viss um að þú viljir fjarlægja %1 tenginguna og viðkomandi stillingar?
+
Confirm Delete
- Staðfesta eyðingu
+
Load connections
-
XML files (*.xml *XML)
- XML skrár (*.xml *.XML)
+
Select Table
- Velja töflu
+
You must select a table in order to add a layer.
- Þú verður að velja töflu til að geta bætt við lagi.
+
Stop
- Stöðva
+
Enter...
-
@@ -38668,22 +38417,22 @@ Villa: %2
Owner
-
Table
- Tafla
+
Type
- Tegund
+
Geometry column
-
Select at id
-
Sql
- Sql
+
Specify a geometry type
-
Enter...
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -38745,61 +38494,61 @@ Villa: %2
Edit...
-
Delete
- Eyða
+
Refresh
- Hressa
+
Copying features...
-
Abort
- Hætta við
+
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to PostGIS database
-
Failed to import some layers!
-
Import was successful.
-
@@ -38809,12 +38558,12 @@ Villa: %2
Delete layer
-
Layer deleted successfully.
-
@@ -38830,12 +38579,12 @@ Villa: %2
%1 as %2 in %3
-
as geometryless table
-
@@ -38843,27 +38592,27 @@ Villa: %2
Form
- Form
+
Band
-
Value
- Gildi
+
Color
- Litur
+
Label
- Merki
+
@@ -38871,12 +38620,12 @@ Villa: %2
Paste Transformations
-
<b>Note: This function is not useful yet!</b>
-
Destination
-
@@ -38917,7 +38666,7 @@ Villa: %2
Miter
-
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Connection failed - Check settings and try again.
-
@@ -39040,7 +38789,7 @@ Villa: %2
Service
-
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
Only show layers in the layer registries
-
Use estimated table statistics for the layer metadata.
-
Use estimated table metadata
-
Also list tables with no geometry
- Byrta líka töflur án landupplýsinga
+
Don't resolve type of unrestricted columns (GEOMETRY)
-
@@ -39168,7 +38917,7 @@ Villa: %2
Add PostGIS Table(s)
-
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
Schema
- Skema
+
Geometry column
-
Stop
- Stöðva
+
Connect
-
@@ -39297,7 +39046,7 @@ Villa: %2
Enter...
-
@@ -39305,27 +39054,27 @@ Villa: %2
Schema
- Skema
+
Table
- Tafla
+
Column
- Dálkur
+
Data Type
-
Spatial Type
-
Select at id
-
Sql
- Sql
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Specify a geometry type
-
Enter...
-
@@ -39385,32 +39134,32 @@ Villa: %2
Form
- Form
+
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- Vídd
+
Height
- Hæð
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39418,12 +39167,12 @@ Villa: %2
Select a picture
-
...
- ...
+
@@ -39446,47 +39195,47 @@ Villa: %2
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
-
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
@@ -39494,97 +39243,97 @@ Villa: %2
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
-
Plugin installation failed
-
Plugin has disappeared
-
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
-
Plugin installed successfully
-
Plugin reinstalled successfully
-
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
-
The plugin is broken. Python said:
-
Plugin uninstall failed
-
Are you sure you want to uninstall the following plugin?
-
Warning: this plugin isn't available in any accessible repository!
-
Plugin uninstalled successfully
-
Unable to add another repository with the same URL!
-
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
-
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
QGIS Official Plugin Repository
-
Nothing to remove! Plugin directory doesn't exist:
-
Failed to remove the directory:
-
Check permissions or remove it manually
-
@@ -39627,22 +39376,22 @@ You need to restart QGIS in order to reload it.
Fetching repositories
-
Overall progress:
-
Abort fetching
-
Repository
-
The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below:
-
Repository details
-
Enter a name for the repository
-
Name
- Nafn
+
Enter the repository URL, beginning with "http://"
-
Enable or disable the repository (disabled repositories will be omitted)
-
Parameters
- Breytur
+
?qgis=
-
URL
- URL
+
Plugins
- Viðbætur
+
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
-
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
Installable
category: plugins that are available for installation
-
This plugin is incompatible with this version of QGIS
-
Plugin designed for QGIS %1
compatible QGIS version(s)
-
This plugin requires a missing module
-
This plugin is broken
-
There is a new version available
-
This is a new plugin
-
Installed version of this plugin is higher than any version found in repository
-
This plugin is experimental
-
This plugin is deprecated
-
Category
-
Tags
-
Author
-
More info
-
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Upgrade plugin
-
Downgrade plugin
-
Install plugin
-
Reinstall plugin
-
Reload all repositories
-
Only show plugins from selected repository
-
The repository is connected
-
unavailable
-
The repository is enabled, but unavailable
-
disabled
-
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
@@ -40078,253 +39827,253 @@ You need to restart QGIS in order to reload it.
Plugin Manager
-
All
- Allt
+
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
New
- Nýtt
+
Not installed plugins seen for the first time
-
Invalid
-
Broken and incompatible installed plugins
-
Settings
- Stillingar
+
Search
- Leita
+
Not installed
-
about:blank
-
Upgrade all upgradeable plugins
-
Upgrade all
-
Uninstall the selected plugin
-
Uninstall plugin
-
Install, reinstall or upgrade the selected plugin
-
Reinstall plugin
-
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
Check for updates on startup
-
every time QGIS starts
-
once a day
-
every 3 days
-
every week
-
every 2 weeks
-
every month
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
-
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Status
-
Name
- Nafn
+
URL
- URL
+
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Add a new plugin repository
-
Add...
- Bæta við...
+
Edit the selected repository
-
Edit...
-
Remove the selected repository
-
Delete
- Eyða
+
@@ -40346,7 +40095,7 @@ p, li { white-space: pre-wrap; }
The point displacement renderer only applies to (single) point layers.
'%1' is not a point layer and cannot be displayed by the point displacement renderer
-
@@ -40374,12 +40123,12 @@ p, li { white-space: pre-wrap; }
Displacement circles
-
Circle pen width:
-
Use scale dependent labelling
-
Millimeter
-
Map unit
-
Horizontal distance
-
Vertical distance
-
Horizontal displacement
-
Vertical displacement
-
@@ -40471,7 +40220,7 @@ p, li { white-space: pre-wrap; }
Connection to database failed
-
PostGIS
-
undefined return value from encoding setting
-
Your database has no working PostGIS support.
-
Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net)
-
Database connection was successful, but the accessible tables could not be determined.
-
Database connection was successful, but the accessible tables could not be determined. The error message from the database was:
%1
-
Database connection was successful, but the accessible tables could not be determined.
The error message from the database was:
%1
-
Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry.
-
Unable to get list of spatially enabled tables from the database
-
Retrieval of postgis version failed
-
Could not parse postgis version string '%1'
-
Erroneous query: %1 returned %2 [%3]
-
Query failed: %1
Error: no result buffer
-
Query: %1 returned %2 [%3]
-
%1 cursor states lost.
SQL: %2
Result: %3 (%4)
-
resetting bad connection.
-
retry after reset succeeded.
-
retry after reset failed again.
-
bad connection, not retrying.
-
Point
- Punktur
+
Multipoint
- Fjölpunkta
+
Line
- Lína
+
Multiline
- Fjöllínu
+
Polygon
-
Multipolygon
- Fjölmarghyrningur
+
No Geometry
-
Unknown Geometry
-
None
- Ekkert
+
Geometry
- Rúmfræði
+
Geography
-
TopoGeometry
-
invalid PostgreSQL layer
-
PostGIS
-
invalid PostgreSQL topology layer
-
Whole number (smallint - 16bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, unlimited length (text)
-
Date
-
Read attempt on an invalid postgresql data source
-
FAILURE: Field %1 not found.
-
unexpected formatted field type '%1' for field %2
-
Field %1 ignored, because of unsupported type %2
-
Field %1 ignored, because of unsupported type type %2
-
Duplicate field %1 found
-
PostgreSQL is still in recovery after a database crash
(or you are connected to a (read-only) slave).
Write accesses will be denied.
-
The custom query is not a select query.
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Key field '%1' for view not found.
-
No key field for view given.
-
Unexpected relation type '%1'.
-
No key field for query given.
-
Could not find topology of layer %1.%2.%3
-
result of extents query invalid: %1
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
PostgreSQL version: unknown
-
unknown
- óþekkt
+
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -40982,7 +40731,7 @@ PostGIS %2
Loading layer %1
-
Project file read error: %1 at line %2 column %3
-
Ignore
-
Unable to open one or more project layers.
Choose ignore to continue loading without the missing layers. Choose cancel to return to your pre-project load state. Choose OK to try to find the missing layers.
-
@@ -41049,22 +40798,22 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select project file
-
QGIS files
-
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -41072,173 +40821,173 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select layers and groups to embed
-
Project file
-
...
- ...
+
QgsProjectProperties
- Layer
Lag
- Type
Tegund
- Identifiable
-
- Vector
Vigur
- WMS
-
- Raster
Rasti
- Coordinate System Restriction
-
- No coordinate systems selected. Disabling restriction.
-
- Selection color
- Vallitur
+
+
+ Measure tool (CRS transformation: %1)
+
Measure tool (CRS transformation: %1)
-
-
- Canvas units (CRS transformation: %1)
-
+ OFF
-
+ ON
-
- CRS %1 was already selected
-
+
+ Coordinate System Restrictions
+
Coordinate System Restrictions
-
-
- The current selection of coordinate systems will be lost.
Proceed?
-
- Select print composer
-
- Composer Title
-
- Select restricted layers and groups
-
+
+ Enter scale
+
Enter scale
- Scale denominator
+
- Scale denominator
- Load scales
+
Load scales
-
-
- XML files (*.xml *.XML)
- XML skrár (*.xml *.XML)
-
-
XML files (*.xml *.XML)
+
+
+ Save scales
-
- Select a valid symbol
-
- Invalid symbol :
-
- Parameters:
-
+ Select %1 from pull-down menu to adjust radii
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
-
@@ -41261,24 +41010,23 @@ Proceed?
Project title
Nafn verkefnis
Descriptive project name
-
Default project title
-
Selection color
- Vallitur
+
absolute
-
relative
-
Save paths
-
- Measure tool
Mælingatól
- Semi-minor
-
+
+ Semi-major
+
Semi-major
-
-
- Used when CRS transformation is turned off
-
- Canvas units
-
- Meters
Metrar
- Feet
Fet
CRS
-
Coordinate Reference System
- Hnitviðmiðskerfi
+
Identify layers
-
Default styles
-
OWS server
-
- Ellipsoid
(for distance calculations)
-
- Degree
-
- Degree display
-
- Decimal degrees
-
- Degrees, Minutes
-
- Degrees, Minutes, Seconds
-
- Precision
Nákvæmni
- Automatically sets the number of decimal places in the mouse position display
-
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
-
- Automatic
-
- Sets the number of decimal places to use for the mouse position display
-
- Manual
Handvirkt
- The number of decimal places for the manual option
-
- decimal places
-
- Project scales
-
- ...
- ...
+
- Enable 'on the fly' CRS transformation
-
Identifiable layers
-
- Project layers
-
- Layer
Lag
- Type
Tegund
- Identifiable
-
- Marker
- Merki
+
- Line
- Lína
+
- Default symbols
-
- Fill
-
- Color Ramp
-
- Transparency
- Gagnsæi
+
- %
-
- Style Manager
- Stílstjóri
+
- Options
Valkostir
Relations
-
- Project file
-
-
- Nautical miles
-
- Assign random colors to symbols
-
- Service capabilities
-
- Person
-
- Title
Titill
- Organization
-
- Online resource
-
- E-Mail
-
- Phone
-
- Abstract
Útdráttur
- Fees
-
- Access constraints
-
- Keyword list
-
- WMS capabilities
-
- Add geometry to feature response
-
- Min. X
-
- Min. Y
-
- Max. X
Hámarks X
- Max. Y
Hámarks Y
- Use Current Canvas Extent
-
- Used
-
- Exclude composers
-
- WFS capabilities
-
- WCS capabilities
-
- Exclude layers
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
- Published
-
- Update
- Uppfæra
+
- Insert
-
- Delete
- Eyða
+
- Unselect all
Fjalægja allt val
- Select all
Velja allt
@@ -41706,44 +41449,44 @@ Proceed?
Macros
-
- Advertised URL
-
- Width
- Vídd
+
- Height
- Hæð
+
- Maximums for GetMap request
-
- Advertised extent
-
- CRS restrictions
-
- Python macros
-
@@ -41766,14 +41509,14 @@ Proceed?
Resource Location Error
-
Error reading database file from:
%1
Because of this the projection selector will not work...
-
@@ -41786,12 +41529,12 @@ Because of this the projection selector will not work...
Filter
- Sía
+
Recently used coordinate reference systems
-
Selected CRS:
-
Authority ID
-
Coordinate reference systems of the world
-
Hide deprecated CRSs
-
@@ -41842,7 +41585,7 @@ Because of this the projection selector will not work...
Set provider filter on %1
-
The where clause returned %n row(s).
returned test rows
-
- Leitin skilaði %n röð.
- Leitin skilaði %n röðum.
-
+ Leitin skilaði %n röð. Leitin skilaði %n röðum.
An error occurred when executing the query.
-
The data provider said:
%1
-
The subset string could not be set
-
@@ -41901,7 +41641,7 @@ The data provider said:
Datasource
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
-
Sample
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
-
Use unfiltered layer
-
Operators
-
NOT
-
OR
-
AND
-
IN
-
NOT IN
-
LIKE
-
ILIKE
-
Provider specific filter expression
-
@@ -42047,29 +41787,29 @@ p, li { white-space: pre-wrap; }
Editable
-
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42077,32 +41817,32 @@ p, li { white-space: pre-wrap; }
Form
- Form
+
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Maximum
- Hámark
+
Minimum
- Lágmark
+
Local minimum/maximum = 0/0
-
@@ -42115,12 +41855,12 @@ p, li { white-space: pre-wrap; }
Expression valid
-
Expression invalid
-
@@ -42128,17 +41868,17 @@ p, li { white-space: pre-wrap; }
Raster calculator
-
Raster bands
-
Result layer
-
Operators
-
OR
-
AND
-
Raster calculator expression
-
@@ -42316,27 +42056,27 @@ p, li { white-space: pre-wrap; }
Format not supported
-
Value
- Gildi
+
Text
- Texti
+
Html
-
Feature
- Fitja
+
@@ -42344,61 +42084,61 @@ p, li { white-space: pre-wrap; }
Default
-
No compression
-
Low compression
-
High compression
-
JPEG compression
-
Cannot get create options for driver %1
-
For details on pyramids options please see the following pages
-
No help available
-
cannot validate pyramid options
-
Cannot validate creation options
-
Valid
-
pyramid creation option
-
creation option
-
Profile name:
-
Use simple interface
-
Use table interface
-
@@ -42440,62 +42180,62 @@ Click on help button to get valid creation options for this format.
Form
- Form
+
New
- Nýtt
+
Remove
- Fjarlægja
+
Reset
- Endursetja
+
Profile
-
Name
- Nafn
+
Value
- Gildi
+
+
- +
+
Validate
-
Help
- Hjálp
+
-
- -
+
Insert KEY=VALUE pairs separated by spaces
-
@@ -42503,67 +42243,67 @@ Click on help button to get valid creation options for this format.
Visibility
- Sýnileiki
+
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Show all bands
-
Show RGB/Gray band(s)
-
Show selected band
-
Display
- Birta
+
Draw as lines
-
Draw as lines (only int layers)
-
Actions
- Aðgerð
+
Reset
- Endursetja
+
Estimate (faster)
-
Actual (slower)
-
Use stddev (1.0)
-
Use stddev (custom)
-
Load for each band
-
Recompute Histogram
-
Band %1
-
Choose a file name to save the map image as
-
@@ -42623,28 +42363,28 @@ Click on help button to get valid creation options for this format.
Form
- Form
+
Set min/max style for
-
Min
- Lágmark
+
Pick Min value on graph
-
...
- ...
+
Prefs/Actions
-
Save plot
-
Save as image...
-
Compute Histogram
-
@@ -42682,27 +42422,27 @@ Click on help button to get valid creation options for this format.
Identify
-
Build Pyramids
-
Create Datasources
-
Remove Datasources
-
Band
-
@@ -42717,37 +42457,37 @@ Click on help button to get valid creation options for this format.
QgsRasterLayer created
-
Raster
- Rasti
+
No Data Value
-
NoDataValue not set
-
Could not determine raster data type.
-
Driver
- Rekill
+
Data Type
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Band
-
Band No
-
No Stats
-
No stats collected yet
-
Min Val
-
Range
-
Sum of squares
-
Standard Deviation
-
Sum of all cells
-
Cell Count
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
<maplayer> not found.
-
@@ -42915,79 +42655,79 @@ Click on help button to get valid creation options for this format.
Large resolution raster layers can slow navigation in QGIS.
-
By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom.
-
You must have write access in the directory where the original data is stored to build pyramids.
-
Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
-
Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
-
Layer Properties - %1
-
Nearest neighbour
-
Bilinear
-
Cubic
-
Average
- Meðal
+
None
- Ekkert
+
Red
-
Green
-
Blue
-
Percent Transparent
-
Gray
-
Indexed Value
-
From
-
To
-
not defined
-
Columns: %1
-
Rows: %1
-
n/a
-
No-Data Value:
-
No-Data Value: %1
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Textfile
-
QGIS Generated Transparent Pixel Value Export File
-
Value
- Gildi
+
Write access denied. Adjust the file permissions and try again.
-
Import Error
-
The following lines contained errors
%1
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Load layer properties from style file
-
QGIS Layer Style File
-
Save layer properties as style file
-
@@ -43187,7 +42927,7 @@ Click on help button to get valid creation options for this format.
Raster Layer Properties
-
Resolutions
-
Render type
-
Resampling
-
Oversampling
-
Style
- Stíll
+
Layer info
-
Description
- Lýsing
+
Keyword list
-
Format
-
Attribution
-
Url
-
MetadataUrl
-
Type
- Tegund
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
-
Band rendering
-
Color rendering
-
Saturation
- mettun
+
Off
-
By lightness
-
By luminosity
-
By average
-
Hue
- Litblær
+
Blending mode
-
Brightness
-
Contrast
-
Grayscale
-
Colorize
-
Strength
-
%
- %
+
Reset all color rendering options to default
-
Reset
- Endursetja
+
Zoomed: in
-
out
-
Global transparency
-
00%
-
<p align="right">Full</p>
-
No data value
-
Use original source no data value.
-
No data value:
-
Original data source no data value, if exists.
-
<src no data value>
-
Additional user defined no data value.
-
Additional no data value
-
Custom transparency options
-
Transparency band
-
Add values from display
-
Transparent pixel list
-
Remove selected row
-
Default values
-
Import from file
-
Export to file
-
Layer name
- Nafn lags
+
displayed as
-
Layer source
-
Scale dependent visibility
-
Specify the coordinate reference system of the layer's geometry.
- Tilgreinið hnitviðmiðskerfi fyrir hnitakerfi lagsins.
+
Specify...
-
Thumbnail
-
Palette
-
Metadata
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Title
- Titill
+
Abstract
- Útdráttur
+
Pyramids
-
Nearest Neighbour
-
Build pyramids
-
Resampling method
-
External
-
Internal (if possible)
-
External (Erdas Imagine)
-
Histogram
-
@@ -43672,67 +43412,67 @@ p, li { white-space: pre-wrap; }
From
-
To
-
Select output directory
-
Warning
- Viðvörun
+
The directory %1 contains files which will be overwritten: %2
-
Select output file
-
GeoTIFF
-
layer
-
user defined
-
Resolution (current: %1)
-
Layer (%1, %2)
-
Project (%1, %2)
-
Selected (%1, %2)
-
@@ -43740,37 +43480,37 @@ p, li { white-space: pre-wrap; }
Save raster layer as...
-
Output mode
-
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Format
-
Create VRT
-
Save as
- Vista sem
+
Browse...
- Fletta...
+
CRS
-
Change ...
- Breyta...
+
Resolution
- Uppllausn
+
Horizontal
- Lárétt
+
Columns
- Dálkar
+
Rows
- Raðir
+
Layer resolution
-
Layer size
-
Vertical
- Lóðrétt
+
VRT Tiles
-
Create Options
-
Pyramids
-
Resolutions
-
Pyramid resolutions corresponding to levels given
-
Use existing
-
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
-
Add values manually
- Bæta við gildum handvirkt
+
...
- ...
+
Load user defined fully transparent (100%) values
-
Remove selected row
-
No option selected
-
Please select an option to load min/max values.
-
@@ -43953,42 +43693,42 @@ með hámakrs breidd og hæð skilgreinda hér að neðan.
Form
- Form
+
Load min/max values
-
-
- -
+
%
- %
+
Min / max
-
Extent
-
Full
-
Current
-
Actual (slower)
-
Estimate (faster)
-
Cumulative
count cut
-
Mean +/-
standard deviation ×
-
Load
- Lesa inn
+
@@ -44028,7 +43768,7 @@ standard deviation ×
Form
- Form
+
External (GTiff .ovr)
-
Internal (if possible)
-
External (Erdas Imagine .aux)
-
Levels
-
Create Options
-
Resampling method
-
Average
- Meðal
+
Nearest Neighbour
-
Custom levels
-
Unknown
-
User defined
-
Estimated
-
Exact
-
min / max
-
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
- %1 af %3. {1 %2 ?}
+
@@ -44145,37 +43885,37 @@ standard deviation ×
Export Frequency distribution as csv
-
Export Colors and elevations as xml
-
Import Colors and elevations from xml
-
Error opening file
-
The relief color file could not be opened
-
Error parsing xml
-
The xml file could not be loaded
-
Enter lower elevation class bound
-
Elevation
-
Enter upper elevation class bound
-
Select color for relief class
-
@@ -44209,12 +43949,12 @@ standard deviation ×
Dialog
- Valmynd
+
Elevation layer
-
Z factor
-
Illumination
-
Azimuth (horizontal angle)
-
Vertical angle
-
Relief colors
-
Create automatically
-
Export distribution...
-
Up
- Upp
+
Down
- Niður
+
+
- +
+
-
- -
+
Lower bound
-
Upper bound
-
Color
- Litur
+
Export colors...
-
Import colors...
-
@@ -44322,7 +44062,7 @@ standard deviation ×
Terrain analysis
-
Hillshade
-
Relief
-
Calculating hillshade...
-
Abort
- Hætta við
+
Calculating relief...
-
Calculating slope...
-
Calculating aspect...
-
Ruggedness
-
Calculating ruggedness...
-
@@ -44398,7 +44138,7 @@ standard deviation ×
Preview Expression
-
@@ -44406,32 +44146,32 @@ standard deviation ×
Dialog
- Valmynd
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -44439,19 +44179,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -44459,7 +44199,7 @@ standard deviation ×
[Generated automatically]
-
@@ -44467,37 +44207,37 @@ standard deviation ×
Add relation
-
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
- Nafn
+
Id
- Kenni
+
@@ -44505,43 +44245,43 @@ standard deviation ×
Form
- Form
+
Toggle editing
-
New
- Nýtt
+
Delete
- Eyða
+
Link
-
Unlink
-
Form View
-
Table View
-
@@ -44549,47 +44289,47 @@ standard deviation ×
Dialog
- Valmynd
+
Name
- Nafn
+
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
- Kenni
+
Add Relation
-
Remove Relation
-
@@ -44597,17 +44337,17 @@ standard deviation ×
Open Form
-
(no selection)
-
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -44662,21 +44402,18 @@ standard deviation ×
Filter expression parsing error:
-
Evaluation error
-
Filter returned %n feature(s)
number of filtered features
-
- Sía skilaði %n fitju
- Sía skilaði %n fitjum
-
+ Sía skilaði %n fitju Sía skilaði %n fitjum
@@ -44695,13 +44432,13 @@ standard deviation ×
Scale area
-
Scale diameter
-
- expression -
-
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
Copy
- Afrita
+
Paste
-
Change color
-
Change transparency
-
Change output unit
-
Change width
-
Change size
-
Transparency
- Gagnsæi
+
Change symbol transparency [%]
-
Symbol unit
-
Select symbol unit
-
Millimeter
-
Map unit
-
Width
- Vídd
+
Change symbol width
-
Size
- Stærð
+
Change symbol size
-
@@ -44850,52 +44587,52 @@ standard deviation ×
(no filter)
-
<li><nobr>%1 features also in rule %2</nobr></li>
-
Label
- Merki
+
Rule
-
Min. scale
-
Count
-
Duplicate count
-
Max. scale
-
Number of features in this rule.
-
Number of features in this rule which are also present in other rule(s).
-
@@ -44903,83 +44640,83 @@ standard deviation ×
Add rule
-
Edit rule
-
Remove rule
-
Refine current rules
-
Count features
-
Rendering order...
-
Remove Rule
-
Refine current rule
-
Add scales to rule
-
Add categories to rule
-
Add ranges to rule
-
Refine a rule to categories
-
Refine a rule to ranges
-
Scale refinement
-
Parent rule %1 must have a symbol for this operation.
-
Please enter scale denominators at which will split the rule, separate them by commas (e.g. 1000,5000):
-
"%1" is not valid scale denominator, ignoring it.
-
Calculating feature count.
-
Abort
- Hætta við
+
@@ -45037,61 +44774,61 @@ standard deviation ×
Database does not exist
-
Failed to open database
-
Failed to check metadata
-
Failed to get list of tables
-
Unknown error
-
Delete
- Eyða
+
%1: Not a vector layer!
-
%1: OK!
-
Import to SpatiaLite database
-
Failed to import some layers!
-
Import was successful.
-
@@ -45101,12 +44838,12 @@ standard deviation ×
Delete layer
-
Layer deleted successfully.
-
@@ -45119,34 +44856,34 @@ standard deviation ×
Create database...
-
New SpatiaLite Database File
- Ný SpatiaLite gagnagrunnsskrá
+
SpatiaLite
-
Create SpatiaLite database
-
The database has been created
-
Failed to create the database:
-
@@ -45154,55 +44891,55 @@ standard deviation ×
Texture width
- Breidd áferðar
+
SVG file
-
Millimeter
-
Map unit
-
Select SVG texture file
-
All files
- Allar skrár
+
Rotation
- Snúningur
+
Color
- Litur
+
Border color
-
Border width
- Þykkt jaðars
+
@@ -45210,32 +44947,32 @@ standard deviation ×
Save style in database
-
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
@@ -45243,37 +44980,37 @@ standard deviation ×
Save style
-
Description
- Lýsing
+
UI
-
Style Name
-
Use as default style for this layer
-
Open...
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45282,29 +45019,29 @@ standard deviation ×
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -45312,7 +45049,7 @@ standard deviation ×
Scale visibility
-
@@ -45320,7 +45057,7 @@ standard deviation ×
Search query builder
-
Save query to an xml file
-
Load query from xml file
-
Found %n matching feature(s).
test result
-
-
+
Search string parsing error
-
Evaluation error
-
The query you specified results in zero records being returned.
-
Could not open file for writing
-
Load query from file
-
Query files
-
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -45456,46 +45190,43 @@ standard deviation ×
Validation started.
-
Validation finished (%n error(s) found).
number of geometry errors
-
-
+
ring %1, vertex %2
-
polygon %1, ring %2, vertex %3
-
polyline %1, vertex %2
-
vertex %1
-
point %1
-
single point
-
@@ -45514,18 +45245,18 @@ standard deviation ×
The error was:
%2
-
The database gave an error while executing this SQL:
-
... (rest of SQL trimmed)
is appended to a truncated SQL statement
-
Millimeter
-
Map unit
-
Color (start)
-
Color (end)
-
Blur radius
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -45593,28 +45324,28 @@ The error was:
Millimeter
-
Map unit
-
Color
- Litur
+
Border color
-
Border width
- Þykkt jaðars
+
@@ -45624,44 +45355,44 @@ The error was:
Millimeter
-
Map unit
-
Color
- Litur
+
Pen width
- Breidd penna
+
Offset
- Hliðrun
+
Dash pattern
-
Join style
- Stíll sameiningar
+
Cap style
-
@@ -45671,54 +45402,54 @@ The error was:
Millimeter
-
Map unit
-
Name
- Nafn
+
Fill color
-
Border color
-
Outline width
-
Angle
- Horn
+
Offset
- Hliðrun
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -45726,32 +45457,32 @@ The error was:
Black to white
-
White to black
-
No enhancement
-
Stretch to MinMax
- Strekkja í Lágmark/Hámark
+
Stretch and clip to MinMax
- Strekkja í og klippa að Lágmark/Hámark
+
Clip to MinMax
- Klippa að Lágmark/Hámark
+
@@ -45759,33 +45490,33 @@ The error was:
Form
- Form
+
Contrast
enhancement
-
Gray band
-
Min
- Lágmark
+
Max
- Hámark
+
Color gradient
-
@@ -45797,7 +45528,7 @@ enhancement
Discrete
-
Linear
- Línulegt
+
Exact
-
Continuous
-
Equal interval
-
Custom color map entry
-
Load Color Map
-
The color map for band %1 has no entries
-
Textfile (*.txt)
-
Import Error
-
The following lines contained errors
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Save file
- Vista skrá
+
QGIS Generated Color Map Export File
-
Write access denied
-
Write access denied. Adjust the file permissions and try again.
-
@@ -45904,22 +45635,22 @@ enhancement
Form
- Form
+
Band
-
Color interpolation
-
Add values manually
- Bæta við gildum handvirkt
+
...
- ...
+
Remove selected row
-
Sort colormap items
-
Load color map from band
-
Load color map from file
-
Export color map to file
-
Value
- Gildi
+
Color
- Litur
+
Label
- Merki
+
Clip
-
Generate new color map
-
Mode
- Hamur
+
Classes
- Flokkar
+
Min
- Lágmark
+
Max
- Hámark
+
Invert
-
Classify
- Flokka
+
Min / max origin:
-
Min / Max origin
-
@@ -46027,7 +45758,7 @@ enhancement
Symbol levels...
-
@@ -46035,32 +45766,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -46068,12 +45799,12 @@ enhancement
Form
- Form
+
The Symbol
-
@@ -46081,22 +45812,22 @@ enhancement
ALL the constraints
-
any ONE of the constraints
-
Invalid name
-
The smart group name field is empty. Kindly provide a name
-
@@ -46104,27 +45835,27 @@ enhancement
Smart Group Editor
-
Smart Group Name
-
Condition matches
-
Add Condition
-
Conditions
-
@@ -46192,22 +45923,22 @@ enhancement
Avoid Int.
-
Avoid intersections of new polygons
-
Enable topological editing
-
Enable snapping on intersection
-
@@ -46215,70 +45946,70 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
unknown error cause
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
UNKNOWN
-
GEOMETRY
-
POINT
-
LINESTRING
-
POLYGON
-
MULTIPOINT
-
MULTILINESTRING
-
MULTIPOLYGON
-
GEOMETRYCOLLECTION
-
@@ -46286,7 +46017,7 @@ enhancement
Binary object (BLOB)
-
Retrieval of spatialite version failed
-
SpatiaLite
-
Could not parse spatialite version string '%1'
-
SQLite error: %2
SQL: %1
-
unknown cause
-
FAILURE: Field %1 not found.
-
@@ -46398,12 +46129,12 @@ SQL: %1
Databases
-
&Update statistics
-
&Set Filter
-
Wildcard
-
RegExp
-
Confirm Update Statistics
-
Update Statistics
-
Internal statistics successfully updated for: %1
-
Error while updating internal statistics for: %1
-
@
-
Choose a SpatiaLite/SQLite DB to open
-
SpatiaLite DB
-
All files
- Allar skrár
+
Error
- Villa
+
Cannot add connection '%1' : a connection with the same name already exists.
-
SpatiaLite DB Open Error
-
Database does not exist: %1
-
Failure while connecting to: %1
%2
-
SpatiaLite getTableInfo Error
-
Failure exploring tables from: %1
%2
-
SpatiaLite Error
-
Unexpected error when working with: %1
%2
-
@@ -46637,61 +46368,58 @@ but implies better performance thereafter.
The spatial query requires at least two vector layers
-
%n selected geometries
selected geometries
-
-
+
Selected geometries
-
%1)Query
-
Begin at %L1
-
< %1 >
-
Total of features = %1
-
Total of invalid features:
-
Finish at %L1 (processing time %L2 minutes)
-
Using the field "%1" for subset
-
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
all = %1
-
%1 of %2(selected features)
-
Create new selection
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
user
-
Map "%1" "on the fly" transformation.
-
enable
-
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Missing target layer
-
Create new layer from items
-
The query from "%1" using "%2" in field not possible.
-
Create new layer from selected
-
%1 of %2 identified
-
@@ -46835,122 +46563,122 @@ CRS of map is %1.
Layer on which the topological operation will select geometries
-
Select source features from
-
Select the target layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
-
Selected feature(s) only
-
Where the feature
-
Select the topological operation
-
Layer whose geometries will be used as reference by the topological operation
-
Reference features of
-
Select the reference layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
-
And use the result to
-
Selected features
-
Number of selected features in map
-
Create layer with selected
-
Result feature ID's
-
Select one FID to identify geometry of feature
-
Create layer with list of items
-
Zoom to item
-
Check to show log processing of query
-
Log messages
-
Run query or close the window
-
@@ -46965,7 +46693,7 @@ p, li { white-space: pre-wrap; }
Query not executed
-
Select a Spatialite Spatial Reference System
-
Authority
-
Reference Name
-
Feature Class
-
DB Relation Name
-
Schema
- Skema
+
Are you sure you want to remove the [%1] connection and all associated settings?
-
Add Shapefiles
-
Shapefiles
-
All files
- Allar skrár
+
The following Shapefile(s) could not be loaded:
-
REASON: File cannot be opened
-
REASON: One or both of the Shapefile files (*.dbf, *.shx) missing
-
-when changing connections Global Schema also changes accordingly
-
Shapefile List:
-
[Add ...] - open a File dialog and browse to the desired file(s) to import
-
[Remove] - remove the currently selected file(s) from the list
-
[Remove All] - remove all the files in the list
-
[SRID] - Reference ID for the shapefiles to be imported
-
[Use Default (SRID)] - set SRID to -1
-
[Geometry Column Name] - name of the geometry column in the database
-
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
-
[Global Schema] - set the schema for all files to be imported into
-
[Import] - import the current shapefiles in the list
-
[Quit] - quit the program
-
[Help] - display this help dialog
-
Import Shapefiles
-
You need to specify a Connection first
-
<p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
-
You need to add shapefiles to the list first
-
Importing files
-
Problem inserting features from file:
-
%1
Invalid table name.
-
%1
No fields detected.
-
%1
The following fields are duplicates:
%2
-
Importing files
%1
-
%1
<p>Error while executing the SQL:</p><p>%2</p><p>The database said:%3</p>
-
Import Shapefiles - Relation Exists
-
%1 of %2 shapefiles could not be imported.
-
@@ -47329,7 +47057,7 @@ Viltu yfirskrifa [2%] vensl?
SPIT - Shapefile to PostGIS Import Tool
-
Import options and shapefile list
-
Global schema
-
Add a shapefile to the list of files to be imported
-
Remove the selected shapefile from the import list
-
Remove all the shapefiles from the import list
-
&Import Shapefiles to PostgreSQL
-
Import shapefiles into a PostGIS-enabled PostgreSQL database. The schema and field names can be customized on import
-
&Spit
-
@@ -47493,8 +47221,8 @@ Viltu yfirskrifa [2%] vensl?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47508,7 +47236,155 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
+
+ QgsSqlAnywhereProvider
+
+ Failed to load interface
+
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
@@ -47526,17 +47402,17 @@ p, li { white-space: pre-wrap; }
Import style(s)
-
file specified below
-
URL specified below
-
Export style(s)
-
You should select at least one symbol/color ramp.
-
Error when saving selected symbols to file:
%1
-
An error occured during import:
%1
-
Group Name
-
Please enter a name for new group:
-
imported
-
New Group
-
New group cannot be created without a name. Kindly enter a name.
-
New group
-
Cannot create a group without name. Enter a name.
-
Duplicate names
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Tákn með nafninu '%1' er þegar til.
Viltu yfirskrifa?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Litastigi með nafninu '1%' er þegar til.
Viltu yfirskrifa?
@@ -47654,27 +47530,27 @@ Viltu yfirskrifa?
Load styles
-
XML files (*.xml *XML)
- XML skrár (*.xml *.XML)
+
Downloading style ...
-
HTTP Error!
-
Download failed: %1.
-
@@ -47687,17 +47563,17 @@ Viltu yfirskrifa?
Import from
-
Location
- Staðsetning
+
Save to group
-
Type here to filter symbols...
-
Share Menu
-
Export
- Flytja út
+
Import
- Innlestur
+
Group Actions
-
Group Symbols
-
Edit Smart Group
-
Marker symbol (%1)
-
Line symbol (%1)
-
Fill symbol (%1)
-
Color ramp (%1)
-
Gradient
-
ColorBrewer
-
cpt-city
-
new marker
-
new line
-
new fill symbol
-
Symbol Name
-
Please enter a name for new symbol:
-
Save symbol
-
Cannot save symbol without name. Enter a name.
-
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Color Ramp Name
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Cannot save color ramp without name. Enter a name.
-
Save color ramp
-
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
-
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
Error!
- Villa!
+
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
Database Error
-
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Add Group
-
Remove Group
-
Apply Group
-
Un-group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
@@ -48043,7 +47919,7 @@ There was a problem with your symbol database.
Fill
-
Tags
-
Share
-
@@ -48086,51 +47962,51 @@ There was a problem with your symbol database.
Select vector layers to add...
-
Layer ID
-
Layer name
- Nafn lags
+
Number of features
-
Geometry type
-
Select raster layers to add...
-
Select layers to add...
-
Type
- Tegund
+
Select All
- Velja allt
+
@@ -48138,12 +48014,12 @@ There was a problem with your symbol database.
Select layers to load
-
1
- 1
+
@@ -48151,12 +48027,12 @@ There was a problem with your symbol database.
SVG annotation
-
Delete
- Eyða
+
SVG files
-
@@ -48174,23 +48050,23 @@ There was a problem with your symbol database.
SVG request failed [error: %1 - url: %2]
-
SVG
-
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -48198,17 +48074,17 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48218,14 +48094,14 @@ There was a problem with your symbol database.
Millimeter
-
Map unit
-
SVG files
-
Border width
- Þykkt jaðars
+
Angle
- Horn
+
Offset
- Hliðrun
+
SVG file
-
Color
- Litur
+
Border color
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -48283,12 +48159,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -48296,17 +48172,17 @@ There was a problem with your symbol database.
Select SVG file
- Veldu SVG skrá
+
SVG files
-
File not found
-
@@ -48314,17 +48190,17 @@ There was a problem with your symbol database.
Size
- Stærð
+
area
- svæði
+
diameter
-
@@ -48350,7 +48226,7 @@ There was a problem with your symbol database.
Define the order in which the symbol layers are rendered. The numbers in the cells define in which rendering pass the layer will be drawn.
-
@@ -48358,22 +48234,22 @@ There was a problem with your symbol database.
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Add symbol layer
-
Remove symbol layer
-
Lock layer's color
-
Move up
-
Move down
-
Save symbol
-
Save
- Vista
+
@@ -48429,42 +48305,42 @@ There was a problem with your symbol database.
Millimeter
-
Map unit
-
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
- Tákn með nafninu '%1' er þegar til. Viltu yfirskrifa?
+
Transparency %1%
-
@@ -48478,7 +48354,7 @@ There was a problem with your symbol database.
Clough-Toucher (cubic)
-
Triangle based interpolation
-
Export triangulation to shapefile after interpolation
-
Form
- Form
+
Multiline
- Fjöllínu
+
HTML
-
@@ -48573,7 +48449,7 @@ There was a problem with your symbol database.
Tile scale
-
@@ -48581,172 +48457,172 @@ There was a problem with your symbol database.
QGIS Publications
-
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
Become an QGIS translator
-
QGIS Mailing lists
-
Is it 'QGIS' or 'Quantum GIS'?
-
QGIS is open source
-
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
Moving Elements and Maps in the Print Composer
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -48767,21 +48643,21 @@ There was a problem with your symbol database.
QGIS Tips!
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
-
I've had enough tips, don't show this on start up any more!
-
@@ -48794,7 +48670,7 @@ p, li { white-space: pre-wrap; }
Select transformation type:
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin plate spline (TPS)
-
Generate ESRI world file (.tfw)
-
@@ -48832,22 +48708,22 @@ p, li { white-space: pre-wrap; }
Transformation settings
-
Transformation type:
-
Resampling method:
-
Nearest neighbour
-
Cubic
-
Cubic Spline
-
Lanczos
-
Compression:
-
Output raster:
-
Target SRS:
-
Generate pdf report:
-
Set Target Resolution
-
Create world file
-
Generate pdf map:
-
Use 0 for transparency when needed
-
Load in QGIS when done
-
Helmert
-
Polynomial 1
-
Polynomial 2
-
Polynomial 3
-
Thin Plate Spline
-
Projective
-
Info
-
Please set output name
-
%1 requires at least %2 GCPs. Please define more
-
Invalid output file name
-
_modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -49015,17 +48891,17 @@ p, li { white-space: pre-wrap; }
Form
- Form
+
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Editable
-
@@ -49033,12 +48909,12 @@ p, li { white-space: pre-wrap; }
Form
- Form
+
Adjust scaling range
-
@@ -49046,18 +48922,18 @@ p, li { white-space: pre-wrap; }
Select a file
-
Error
- Villa
+
Could not open file %1
Error was:%2
-
@@ -49065,37 +48941,37 @@ Error was:%2
Form
- Form
+
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
-
Value
- Gildi
+
Description
- Lýsing
+
Remove Selected
-
@@ -49103,7 +48979,7 @@ Error was:%2
Edit filter expression
-
@@ -49111,52 +48987,52 @@ Error was:%2
Form
- Form
+
Select layer, key column and value column
-
Layer
- Lag
+
Key column
- Lykildálkur
+
Value column
-
Allow null value
-
Order by value
-
Allow multiple selections
-
Filter expression
-
...
- ...
+
@@ -49164,7 +49040,7 @@ Error was:%2
(no selection)
-
@@ -49172,12 +49048,12 @@ Error was:%2
ColorBrewer ramp
-
Scheme name
-
Codec %1 not found. Falling back to system locale
-
Fast Access to Features at ID
-
Change Geometries
-
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -49253,27 +49129,27 @@ Error was:%2
X attribute
-
Y attribute
-
Length attribute
-
Angle attribute
-
Height attribute
-
@@ -49281,46 +49157,46 @@ Error was:%2
Discrete
-
Continuous
-
Gradient file : %1
-
License file : %1
-
Edit Stop Color
-
Offset of the stop
-
Please enter offset in percents (%) of the new stop
-
Add Color Stop
-
@@ -49328,7 +49204,7 @@ Error was:%2
Gradient color ramp
-
Change...
-
Type
- Tegund
+
Multiple stops
-
Add stop
-
Remove stop
-
Offset (%)
-
Information
- Upplýsingar
+
@@ -49392,17 +49268,17 @@ Error was:%2
Updating feature count for layer %1
-
Abort
- Hætta við
+
ERROR: no provider
-
Commit errors:
%1
-
General
- Almennt
+
Layer comment
-
Storage type of this layer
-
Description of this provider
-
Source for this layer
-
Geometry type of the features in this layer
-
The number of features in this layer
-
Editing capabilities of this layer
-
Extents
- kortvídd
+
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
Error: qgis element could not be found
-
xMin,yMin %1,%2 : xMax,yMax %3,%4
-
unknown extent
-
(Invalid transformation of layer extents)
-
Field
- svæði
+
Type
- Tegund
+
Length
- Lengd
+
Precision
- Nákvæmni
+
Comment
- Athugasemd
+
@@ -49544,154 +49420,115 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
-
+
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
-
+
SUCCESS: %n attribute(s) added.
added attributes count
-
-
+
ERROR: %n new attribute(s) not added
not added attributes count
-
-
+
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
-
+
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
-
+
SUCCESS: %n feature(s) deleted.
deleted features count
-
-
+
ERROR: %n feature(s) not deleted.
not deleted features count
-
-
+
SUCCESS: %n feature(s) added.
added features count
-
-
+
ERROR: %n feature(s) not added.
not added features count
-
-
+
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
-
+
ERROR: %n geometries not changed.
not changed geometries count
-
-
+
Provider errors:
-
@@ -49701,60 +49538,60 @@ Error was:%2
QGIS Layer Style File
-
SLD File
-
Load from file
-
Load from database
-
Save in database (%1)
-
Layer Properties - %1
-
Stop editing mode to enable this.
-
Insert expression
-
This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
-
The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
-
Not supported
- Ekki stutt
+
Load default style from:
-
Local database
-
Datasource database
-
Loaded from Provider
-
No default style was found for this layer
-
Save default style to:
-
Load layer properties from style file
-
Load Style
-
Style saved
-
Save layer properties as style file
-
Error occured retrieving styles from database
-
The retrieved style is not a valid named style. Error message: %1
-
Save Style
-
@@ -49881,86 +49718,86 @@ Error was:%2
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
Description
- Lýsing
+
Keyword list
-
DataUrl
-
Format
-
Attribution
-
Url
-
MetadataUrl
-
Type
- Tegund
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
-
Labels (deprecated)
-
Specify the coordinate reference system of the layer's geometry.
- Tilgreinið hnitviðmiðskerfi fyrir hnitakerfi lagsins.
+
Display
- Birta
+
Rendering
-
Layer info
-
Layer source
-
Data source encoding
-
Coordinate reference system
- Hnitviðmiðskerfi
+
Specify...
-
Create spatial index
- Búa til rýmislegan vísi
+
Update extents
-
Scale dependent visibility
-
Feature subset
-
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
- punktar
+
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Map Tip display text
-
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
-
Inserts the selected field into the action
-
Insert field
-
HTML
-
Field
- svæði
+
Layer name
- Nafn lags
+
displayed as
-
Metadata
-
Title
- Titill
+
Abstract
- Útdráttur
+
Joins
-
Join layer
- Sameina lag
+
Join field
- Sameina svæði
+
Target field
-
Diagrams
-
@@ -50216,12 +50053,12 @@ Error was:%2
Layer CRS
- Hnitviðmiðskerfi þekju
+
Project CRS
-
No symbology
-
Feature symbology
-
Symbol layer symbology
-
<Default>
-
Select the coordinate reference system for the vector file. The data points will be transformed from the layer coordinate reference system.
-
@@ -50281,27 +50118,27 @@ Error was:%2
CRS
-
Symbology export
-
Datasource Options
-
Custom Options
-
Layer Options
-
Save only selected features
-
This allows one to surpress attribute creation as some OGR drivers (eg. DGN, DXF) don't support it.
-
Skip attribute creation
-
Add saved file to map
-
1:
- 1:
+
Scale
- Skali
+
@@ -50406,12 +50243,12 @@ Error was:%2
Edit...
-
Delete
- Eyða
+
@@ -50427,7 +50264,7 @@ Error was:%2
Select a layer
- Velja lag
+
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -50448,12 +50285,12 @@ Error was:%2
Edit...
-
Delete
- Eyða
+
DescribeFeatureType failed for url %1
-
WFS
-
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
@@ -50532,32 +50369,32 @@ Error was:%2
&Add
- &Bæta við
+
&Build query
-
Build query
-
Network Error
-
Capabilities document is not valid
-
Server Exception
-
capabilities document contained no layers.
-
Filter:
-
Display WFS FeatureTypes containing this word in the title, name or abstract
-
Use title for layer name
-
WMS Password for %1
-
@@ -50697,27 +50534,27 @@ Error was:%2
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
Edit...
-
Delete
- Eyða
+
@@ -50738,7 +50575,7 @@ Error was:%2
Add selected layers to map
-
encoding %1 not supported.
-
WMS Provider
-
Failed to parse WMS URI
-
Failed to download capabilities:
-
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
-
+
Select layer(s) or a tileset
-
Select either layer(s) or a tileset
-
Coordinate Reference System (%n available)
crs count
-
-
+
No common CRS for selected layers.
-
No CRS selected
- Ekkert hnitviðmiðskerfi valið
+
No image encoding selected
-
%n Layer(s) selected
selected layer count
-
-
+
Tileset selected
-
Could not understand the response. The %1 provider said:
%2
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
Adds a few example WMS servers
-
Add default servers
-
Image encoding
-
Load connections from file
- Lesa inn tengingar frá skrá
+
Load
- Lesa inn
+
Add Layer(s) from a WM(T)S Server
-
Tile size
-
Feature limit for GetFeatureInfo
-
10
- 10
+
Layer Order
-
Move selected layer UP
-
Up
- Upp
+
Move selected layer DOWN
-
Down
- Niður
+
Tilesets
-
Tileset
-
CRS
-
Server Search
-
Add selected row to WMS list
-
@@ -51112,49 +50940,49 @@ Error was:%2
empty capabilities document
-
Tried URL: %1
-
Capabilities request redirected.
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
WCS
-
%1 of %2 bytes of capabilities downloaded.
-
Exception
- Frávik
+
Could not get WCS capabilities: %1
-
Dom Exception
-
Version not supported
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -51200,7 +51028,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
-
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51277,27 +51105,27 @@ Response was:
Cannot describe coverage
-
Coverage not found
-
Cannot calculate extent
-
Cannot get test dataset.
-
Received coverage has wrong extent %1 (expected %2)
-
WCS
-
Rotating raster
-
Block read OK
-
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
Getting map via WCS.
-
No data received
-
Cannot create memory file
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request is for a Coverage not offered by the service instance.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
(No error code was reported)
-
(Unknown error code)
-
The WCS vendor also reported:
-
composed error message '%1'.
-
Cannot verify coverage full extent: %1
-
Property
-
Value
- Gildi
+
Name (identifier)
-
Title
- Titill
+
Abstract
- Útdráttur
+
Fixed Width
-
Fixed Height
-
Native CRS
-
Native Bounding Box
-
WGS 84 Bounding Box
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in format
-
Coverages
-
Cache Stats
-
Server Properties
-
Keywords
-
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
GetCapabilitiesUrl
-
Get Coverage Url
-
<font color="red">(advertised but ignored)</font>
-
And %1 more coverages
-
Format not supported
-
Read data error
-
RasterIO error:
-
@@ -51592,12 +51417,12 @@ Response was:
...
- ...
+
Select a file
-
@@ -51605,22 +51430,22 @@ Response was:
Form
- Form
+
Field contains a filename or URL for a webpage
-
Width
- Vídd
+
Height
- Hæð
+
@@ -51628,33 +51453,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
-
Capabilities request redirected.
-
Redirect loop detected: %1
-
WMS
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
@@ -51662,7 +51487,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
-
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51710,22 +51535,22 @@ Response was:
Cannot parse URI
-
Cannot calculate extent
-
Cannot set CRS
-
Number of layers and styles don't match
-
WMS
-
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
Getting map via WMS.
-
Getting tiles.
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
image is NULL
-
unexpected image size
-
Status: %1
Reason phrase: %2
-
Redirect loop detected: %1
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request contains a CRS not offered by the server for one or more of the Layers in the request.
-
Request contains a SRS not offered by the server for one or more of the Layers in the request.
-
GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
-
GetFeatureInfo request is applied to a Layer which is not declared queryable.
-
GetFeatureInfo request contains invalid X or Y value.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
-
Request contains an invalid sample dimension value.
-
Request is for an optional operation that is not supported by the server.
-
(No error code was reported)
-
(Unknown error code)
-
The WMS vendor also reported:
-
Property
-
Can Identify
-
Cascade Count
-
Fixed Width
-
Fixed Height
-
Available in CRS
-
(and %n more)
crs
-
-
+
LegendURLs
-
Server Properties
-
Tile Layer Properties
-
Cache Stats
-
Keywords
-
Online Resource
-
Contact Person
-
Fees
-
Access Constraints
-
Image Formats
-
Identify Formats
-
Layer Count
-
Tile Layer Count
-
GetCapabilitiesUrl
-
GetMapUrl
-
<font color="red">(advertised but ignored)</font>
-
GetFeatureInfoUrl
-
GetLegendGraphic
-
GetTileUrl
-
Tile templates
-
FeatureInfo templates
-
Tileset Properties
-
Identifier
-
Tile mode
-
WMTS
-
WMS-C
-
Invalid tile mode
-
Available Styles
-
CRS
-
Bounding Box
-
Available Tilesets
-
Selected tile matrix set
-
Scale
- Skali
+
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
Width
- Vídd
+
Height
- Hæð
+
Top
- Efst
+
Left
-
Bottom
- Neðst
+
Right
-
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Cache stats
-
Hits
-
Misses
-
Format not supported
-
Context not fully specified (extent was defined but width and/or height was not).
-
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
GML schema is not valid
-
GML is not valid
-
Cannot identify
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
identify request redirected.
-
Map getfeatureinfo error %1: %2
-
Cannot parse getfeatureinfo: %1
-
Map getfeatureinfo error: %1 [%2]
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52423,18 +52227,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
-
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -52513,7 +52305,7 @@ Reason phrase: %2
Select dimensions
-
Value
- Gildi
+
Abstract
- Útdráttur
+
Default
-
@@ -52542,22 +52334,22 @@ Reason phrase: %2
Dialog
- Valmynd
+
Raster layer:
-
Polygon layer containing the zones:
-
Output column prefix:
-
@@ -52567,17 +52359,17 @@ Reason phrase: %2
&Zonal statistics
-
Calculating zonal statistics...
-
Abort...
- Hætta við...
+
@@ -52585,7 +52377,7 @@ Reason phrase: %2
Record Metadata
-
@@ -52611,7 +52403,7 @@ Reason phrase: %2
Transportation layer
-
Direction field
-
Value for forward direction
-
Value for reverse direction
-
Value two-way direction
-
km/h
-
m/s
-
Default settings
-
Two-way direction
-
Forward direction
-
Reverse direction
-
Cost
-
Line lengths
-
Road graph plugin settings
-
Time unit
-
Distance unit
-
second
-
hour
-
meter
-
kilometer
-
@@ -52763,7 +52555,7 @@ Reason phrase: %2
Criterion
-
Point not selected
-
First, select start and stop points.
-
Plugin isn't configured
-
Plugin isn't configured!
-
Tie point failed
-
Start point doesn't tie to the road!
-
Stop point doesn't tie to the road!
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
Path not found
-
@@ -52854,33 +52646,33 @@ Reason phrase: %2
Settings
- Stillingar
+
Road graph plugin settings
-
Road graph
-
SLDatabase
Run &Vacuum
-
&Database
- &Gagnagrunnur
+
Sorry
-
No database selected or you are not connected to it.
@@ -52890,223 +52682,444 @@ Reason phrase: %2
SaDbTableModel
+ Schema
+
+
+ Table
- Tafla
+ Tafla
+ Type
- Tegund
+ Tegund
+ SRID
- Staðviðmiðskerfisauðkennir
+ Staðviðmiðskerfisauðkennir
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Vista tengingu
+ Vista tengingu
+ Should the existing connection %1 be overwritten?
- Á að skrifa yfir eldri tengingu %1?
+ Á að skrifa yfir eldri tengingu %1?
+ Failed to load interface
- Gat ekki lesið inn viðmót
+ Gat ekki lesið inn viðmót
+ Test connection
- Prófa tengingu
+ Prófa tengingu
+ Connection to %1 was successful
- Tenging %1 tókst
+ Tenging %1 tókst
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Tenging mistókst. Athugið stillingar og prófið aftur. SQL Anywhere villa: %1 Lýsing: %2
+ Tenging mistókst. Athugið stillingar og prófið aftur. SQL Anywhere villa: %1 Lýsing: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Búa til nýja SQL Anywhere tengingu
+ Búa til nýja SQL Anywhere tengingu
+ Connection Information
- Upplýsingar um tengingu
+ Upplýsingar um tengingu
+ Name
- Nafn
+ Nafn
+ Host
- Þjónn
+ Þjónn
+ Port
- Tengi
+ Tengi
+ Server
- Þjónn
+ Þjónn
+ Database
- Gagnagrunnur
+ Gagnagrunnur
+ Connection Parameters
+
+
+ Username
- Notanafn
+ Notanafn
+ Password
- Lykilorð
+ Lykilorð
+ Name of the new connection
- Nafn á nýja tengingu
+ Nafn á nýja tengingu
+ Name or IP address of computer hosting the database server (leave blank for local connections)
+
+
+ Port number used by the database server (leave blank for default 2638)
+
+
+ Name of the database server (leave blank for default server on host)
+
+
+ Name of the database (leave blank for default database on server)
+
+
+ Additional connection parameters
+
+
+ Database username
+
+
+ Database password
+
+
+ Save the connection username in the registry
+
+
+ Save Username
- Vista notandanafn
+ Vista notandanafn
+ &Test Connect
- &Prófa tengingu
+ &Prófa tengingu
+ Save the connection password in the registry (WARNING: NOT SECURE)
+
+
+ Save Password
- Vista lykilorð
+ Vista lykilorð
+
+
+ Encrypt packets using simple encryption
+
+
+ Simple Encryption
+
+
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
+
+
+ Estimate table metadata
+
+
+ Search for geometry columns in tables owned by other users
+
+
+ Search other users' tables
+
SaSourceSelect
+ &Add
- &Bæta við
+ &Bæta við
+ &Set Filter
+
+
+ Wildcard
+
+
+ RegExp
+
+
+ All
- Allt
+ Allt
+ Schema
+
+
+ Table
- Tafla
+ Tafla
+ Type
- Tegund
+ Tegund
+ SRID
- Staðviðmiðskerfisauðkennir
+ Staðviðmiðskerfisauðkennir
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Ertu viss um að þú viljir fjarlægja %1 tenginguna og viðkomandi stillingar?
+ Ertu viss um að þú viljir fjarlægja %1 tenginguna og viðkomandi stillingar?
+ Confirm Delete
- Staðfesta eyðingu
+ Staðfesta eyðingu
+ Select Table
- Velja töflu
+ Velja töflu
+ You must select a table in order to add a layer.
- Þú verður að velja töflu til að geta bætt við lagi.
+ Þú verður að velja töflu til að geta bætt við lagi.
+ Failed to load interface
+
+
+ Connection failed
- Tenging mistókst
+ Tenging mistókst
+ Connection to database %1 failed. Check settings and try again.
+
+SQL Anywhere error code: %2
+Description: %3
+
+
+ No accessible tables found
- Engar aðgengilegar töflur fundust
+ Engar aðgengilegar töflur fundust
+
+
+ Database connection was successful, but no tables containing geometry columns were %1.
+
+
+ found
+
+
+ found in your schema
+
SaSourceSelectBase
+ Add SQL Anywhere layer
- Bæta við SQL Anywhere lagi
+ Bæta við SQL Anywhere lagi
+ SQL Anywhere Connections
- SQL Anywhere tengingar
+ SQL Anywhere tengingar
+ Delete
- Eyða
+ Eyða
+ Edit
- Breyta
+ Breyta
+ New
- Nýtt
+ Nýtt
+ Connect
- Tengja
+ Tengja
+ Search options
- Leitarvalkostir
+ Leitarvalkostir
+ Search
- Leita
+ Leita
+ Search mode
- Leitarhamur
+ Leitarhamur
+ Search in columns
- Leita í dálkum
+ Leita í dálkum
+
+
+
+ SaveAsPythonScriptAction
+
+ I/O error
+
+
+ Unable to save edits. Reason:
+ %s
+
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
-
I/O error
-
Unable to save edits. Reason:
%s
-
@@ -53167,60 +53180,60 @@ Description: %2
Editor
-
Auto-save script before running
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
-
Comment block:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Font
- Leturgerð
+
Size
- Stærð
+
Enable Object Inspector (switching between tabs may be slow)
-
Console
-
APIs
-
Using preloaded APIs file
-
Path
-
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
@@ -53415,20 +53428,24 @@ Description: %2
SqlAnywhere
+ Add SQL Anywhere Layer...
- Bæta við SQL Anywhere lagi...
+ Bæta við SQL Anywhere lagi...
+ Store vector layers within a SQL Anywhere database
- Vista vigurlög innan SQL Anywhere gagnagrunns
+ Vista vigurlög innan SQL Anywhere gagnagrunns
+ Invalid Layer
- Ógilt lag
+ Ógilt lag
+ %1 is an invalid layer and cannot be loaded.
- %1 er ógilt lag og ekki hægt að lesa inn.
+ %1 er ógilt lag og ekki hægt að lesa inn.
@@ -53436,62 +53453,62 @@ Description: %2
Form
- Form
+
Unit
-
Opacity
-
Color
- Litur
+
Open Library
-
Size
- Stærð
+
Rotation
- Snúningur
+
°
- °
+
Width
- Vídd
+
Symbols in group
-
Symbol Name
-
Advanced
- Meira
+
@@ -53499,18 +53516,18 @@ Description: %2
TopologyChecker
-
Topology Checker for vector layer
-
&Topology Checker
-
@@ -53535,15 +53552,15 @@ Description: %2
ValidateDialog
Check geometry validity
-
Geometry errors
-
Total encountered errors
-
Error!
@@ -53559,7 +53576,7 @@ Description: %2
Please specify output shapefile
-
Cancel
@@ -53567,18 +53584,18 @@ Description: %2
Geometry
- Rúmfræði
+
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Feature
@@ -53605,7 +53622,7 @@ Description: %2
List unique values
-
Unique values
@@ -53617,19 +53634,19 @@ Description: %2
Basics statistics
-
Statistics output
-
Nearest neighbour analysis
-
Nearest neighbour statistics
-
Cancel
@@ -53637,7 +53654,7 @@ Description: %2
Parameter
-
Value
@@ -53654,7 +53671,7 @@ Description: %2
Force point inside polygon
-
@@ -53662,92 +53679,92 @@ Description: %2
Form
- Form
+
Colors
- Litir
+
Fill
-
Border
- Jaðar
+
Left
-
HCenter
-
Right
-
Top
- Efst
+
VCenter
-
Bottom
- Neðst
+
Outline style
-
Outline width
-
Rotation
- Snúningur
+
Anchor point
-
Data defined properties...
-
Offset X,Y
- Hliðrun X,Y
+
Symbol width
-
Symbol height
-
@@ -53770,37 +53787,37 @@ Description: %2
Anchor point
-
Left
-
HCenter
-
Right
-
Top
- Efst
+
VCenter
-
Bottom
- Neðst
+
Form
- Form
+
Two color
-
Color ramp
- Litastigun
+
Gradient type
-
Linear
- Línulegt
+
Radial
-
Conical
-
Coord mode
-
Object
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
x
- x
+
y
- y
+
Feature centroid
-
Reference Point 2
-
Angle
- Horn
+
°
-
Data defined properties...
-
Offset X,Y
- Hliðrun X,Y
+
@@ -53949,27 +53966,27 @@ Description: %2
Form
- Form
+
Angle
- Horn
+
Data defined properties...
-
Distance
-
Offset
- Hliðrun
+
@@ -53982,32 +53999,32 @@ Description: %2
Marker placement
-
with interval
-
on every vertex
-
on last vertex only
-
on first vertex only
-
Offset along line
-
Data defined properties
- Stillingar skilgreindar í gögnum
+
on central point
-
@@ -54035,32 +54052,32 @@ Description: %2
Form
- Form
+
Vertical distance
-
Vertical displacement
-
Data defined properties...
-
Horizontal displacement
-
Horizontal distance
-
@@ -54073,7 +54090,7 @@ Description: %2
Border width
- Þykkt jaðars
+
Colors
- Litir
+
Fill
-
Border
- Jaðar
+
Data defined properties...
-
SVG Groups
-
SVG Symbols
-
Form
- Form
+
Gradient colors
-
Two color
-
Color ramp
- Litastigun
+
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Blur strength
-
Offset X,Y
- Hliðrun X,Y
+
Data defined properties...
-
@@ -54199,37 +54216,37 @@ Description: %2
Fill style
-
Colors
- Litir
+
Border style
-
Join style
- Stíll sameiningar
+
Data defined properties...
-
Fill
-
Border
- Jaðar
+
@@ -54272,7 +54289,7 @@ Description: %2
Cap style
-
Dash pattern unit
-
Data defined properties...
-
Draw line only inside polygon
-
@@ -54310,67 +54327,67 @@ Description: %2
Fill
-
Border
- Jaðar
+
Outline style
-
Outline width
-
Anchor point
-
Left
-
HCenter
-
Right
-
Top
- Efst
+
VCenter
-
Bottom
- Neðst
+
Data defined properties...
-
Colors
- Litir
+
°
-
Colors
- Litir
+
Fill
-
Border
- Jaðar
+
Anchor point
-
Left
-
HCenter
-
Right
-
Top
- Efst
+
VCenter
-
Bottom
- Neðst
+
Data defined properties...
-
Border width
- Þykkt jaðars
+
SVG Groups
-
...
- ...
+
@@ -54491,32 +54508,32 @@ Description: %2
Form
- Form
+
SVG Images
-
SVG Groups
-
...
- ...
+
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
-
@@ -54524,77 +54541,77 @@ Description: %2
Form
- Form
+
Y attribute
-
Scale
- Skali
+
X attribute
-
Vector field type
-
Height only
-
Polar
-
Cartesian
-
Angle units
-
Degrees
-
Radians
-
Angle orientation
-
Counterclockwise from east
-
Clockwise from north
-
Distance unit
-
@@ -54602,17 +54619,17 @@ Description: %2
XML Request / Response
-
Request
-
Response
-
@@ -54633,59 +54650,59 @@ Description: %2
Topology Checker
-
Validate All
-
Validate Extent
-
Topology not checked yet
-
Configure
-
Show topology errors
-
Show errors
-
Select automatic fix
-
Fix!
-
No errors were found
-
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
Abort
- Hætta við
+
context_help
- <h3>Database connection</h3>
<h3>Gagnagrunnstenging</h3>
@@ -54807,7 +54824,7 @@ On this tab you can search for WMS servers. It is possible to enter a search-str
To visualize the results, select an table entry, press the <label>Add selected row to WMS list</label> button and change back to the <label>Servers</label> tab.<p>
You only need to request the list of layers by clicking the <label>Connect</label> button.
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -54896,7 +54913,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -54948,9 +54965,9 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -56417,7 +56512,7 @@ Click on one of the icons along the top of the composer window to select what ty
Input DXF file
-
Polyline
-
Warning
- Viðvörun
+
Please specify a file to convert.
-
Please specify an output file
-
Choose a DXF file to open
-
DXF files
-
Shapefile
-
@@ -56517,27 +56612,27 @@ For support send a mail to scala@itc.cnr.it
eVis Event Id Tool
-
eVis Event Browser
-
Create layer from a database query
-
Open an Event Browers and display the selected feature
-
Open an Event Browser to explore the current layer's features
-
@@ -56650,7 +56745,7 @@ For support send a mail to scala@itc.cnr.it
Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide.
-
Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
-
Enter the database host. If the database resides on your desktop you should enter ¨localhost¨. If you selected ¨MSAccess¨ as the database type this option will not be available.
-
Enter the port through which the database must be accessed if a MYSQL database is used.
-
Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established.
-
User name to access the database.
-
Select the type of database from the list of supported databases in the drop-down menu.
-
Run the query entered above. The status of the query will be displayed in the Output Console below.
-
Enter the query you want to run in this window.
-
A window for status messages to be displayed.
-
Output Console
-
@@ -56781,22 +56876,22 @@ p, li { white-space: pre-wrap; }
Database File Selection
-
The name of the field that contains the Y coordinate of the points.
-
The name of the field that contains the X coordinate of the points.
-
Enter the name for the new layer that will be created and displayed in QGIS.
-
Generic Event Browser
-
Unable to connect to either the map canvas or application interface
-
An invalid feature was received during initialization
-
Event Browser - Displaying records 01 of %1
-
Event Browser - Displaying records %1 of %2
-
Use the Previous button to display the previous photo when more than one photo is available for display.
-
Use the Next button to display the next photo when more than one photo is available for display.
-
All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green.
-
Image display area
-
Display area for the image.
-
Attribute containing path to file
-
Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
-
If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
-
Path is relative
-
If checked, the relative path values will be saved for the next session.
-
Compass bearing
-
Attribute containing compass bearing
-
Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
-
If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
-
If checked, the Display Compass Bearing values will be saved for the next session.
-
Compass offset
-
Define the compass offset manually.
-
A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
Define the compass offset using a field from the vector layer attribute table.
-
From Attribute
-
Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
If checked, the compass offset values will be saved for the next session.
-
Resets the compass offset values to the default settings.
-
Relative paths
-
The base path or url from which images and documents can be “relative”
-
Base Path
-
The Base Path onto which the relative path defined above will be appended.
-
If checked, the Base Path will be saved for the next session.
-
Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
-
If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
-
Replace entire path/url stored in image path attribute with user defined
Base Path (i.e. keep only filename from attribute)
-
If checked, the current check-box setting will be saved for the next session.
-
If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
-
Apply Path to Image rules when loading docs in external applications
-
Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
-
Configure External Applications
-
File extension and external application in which to load a document of that type
-
A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
-
Add a new file type with a unique extension and the path for the application that can open the file.
-
Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
-
@@ -57239,12 +57334,12 @@ Base Path (i.e. keep only filename from attribute)
fTools
QGIS version detected:
-
This version of fTools requires at least QGIS version 1.0.0
Plugin will not be enabled.
-
&Analysis Tools
@@ -57252,7 +57347,7 @@ Plugin will not be enabled.
Distance matrix
-
Sum line lengths
@@ -57260,31 +57355,31 @@ Plugin will not be enabled.
Points in polygon
-
Basic statistics
-
List unique values
-
Nearest neighbour analysis
-
Mean coordinate(s)
-
Line intersections
-
&Research Tools
-
Random selection
@@ -57292,7 +57387,7 @@ Plugin will not be enabled.
Random selection within subsets
- Handahófsval innan úttektarmengi
+
Random points
@@ -57300,7 +57395,7 @@ Plugin will not be enabled.
Regular points
-
Vector grid
@@ -57312,103 +57407,103 @@ Plugin will not be enabled.
Polygon from layer extent
- Fláki úr kortvídd lags
+
&Geoprocessing Tools
-
Convex hull(s)
-
Buffer(s)
-
Intersect
-
Union
-
Symetrical difference
-
Clip
-
Dissolve
-
Difference
-
Eliminate sliver polygons
- Útiloka flaskafláka
+
G&eometry Tools
-
Export/Add geometry columns
-
Check geometry validity
-
Polygon centroids
-
Delaunay triangulation
-
Voronoi Polygons
-
Extract nodes
-
Simplify geometries
- Einfalda rúmfræði
+
Densify geometries
-
Multipart to singleparts
-
Singleparts to multipart
-
Polygons to lines
-
Lines to polygons
-
&Data Management Tools
-
Define current projection
@@ -57416,7 +57511,7 @@ Plugin will not be enabled.
Join attributes by location
-
Split vector layer
@@ -57424,7 +57519,7 @@ Plugin will not be enabled.
Merge shapefiles to one
-
Create spatial index
@@ -57434,7 +57529,7 @@ Plugin will not be enabled.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -57450,1857 +57545,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -59353,10 +59394,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59370,10 +59411,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -59394,10 +59435,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -59410,12 +59451,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -59431,16 +59472,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -59469,15 +59510,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -59494,17 +59535,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -59518,17 +59559,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -59544,16 +59585,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -59567,10 +59608,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -59583,10 +59624,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -59600,12 +59641,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -59619,12 +59660,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -59639,17 +59680,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -59659,10 +59700,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -59677,12 +59718,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -59696,12 +59737,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -59715,10 +59756,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -59735,12 +59776,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -59754,17 +59795,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -59779,10 +59820,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -59793,12 +59834,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -59812,17 +59853,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -59835,12 +59876,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -59857,14 +59898,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -59878,15 +59919,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -59895,15 +59936,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -59934,14 +59975,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -59960,14 +60001,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -60072,12 +60113,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -60091,10 +60132,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -60108,10 +60149,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -60128,10 +60169,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -60147,9 +60188,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -60172,11 +60213,11 @@ Returns a string representation of a color based on its hue, saturation, value a
Point x ordinate
-
Point y ordinate
-
@@ -60189,62 +60230,62 @@ Returns a string representation of a color based on its hue, saturation, value a
(Optional) column to read labels
-
3D-Viewer (NVIZ)
-
3d Visualization
-
Add a value to the current category values
-
Add elements to layer (ALL elements of the selected layer type!)
-
Add missing centroids to closed boundaries
-
Add one or more columns to attribute table
-
Allocate network
-
Assign constant value to column
-
Assign new constant value to column only if the result of query is TRUE
-
Assign new value as result of operation on columns to column in attribute table
-
Assign new value to column as result of operation on columns only if the result of query is TRUE
-
Attribute field (interpolated values)
-
Attribute field to (over)write
-
Auto-balancing of colors for LANDSAT-TM raster
-
Bicubic or bilinear spline interpolation with Tykhonov regularization
-
Bilinear interpolation utility for raster maps
-
Blend color components for two rasters by given ratio
-
Blend red, green, raster layers to obtain one color raster
-
Break (topologically clean) polygons (imported from non topological format, like ShapeFile). Boundaries are broken on each point shared between 2 and more polygons where angles of segments are different
-
Break lines at each intersection of vector
-
Brovey transform to merge multispectral and high-res panchromatic channels
-
Buffer
- Textabakgrunnur
+
Build polylines from lines
-
Calculate average of raster within areas with the same category in a user-defined base map
-
Calculate covariance/correlation matrix for user-defined rasters
-
Calculate error matrix and kappa parameter for accuracy assessment of classification result
-
Calculate geometry statistics for vectors
-
Calculate linear regression from two rasters: y = a + b*x
-
Calculate median of raster within areas with the same category in a user-defined base map
-
Calculate mode of raster within areas with the same category in a user-defined base map
-
Calculate optimal index factor table for LANDSAT-TM raster
-
Calculate raster surface area
-
Calculate shadow maps from exact sun position
-
Calculate shadow maps from sun position determinated by date/time
-
Calculate statistics for raster
-
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Category or object oriented statistics
-
Cats
-
Cats (select from the map or using their id)
-
Change category values and labels
-
Change field
-
Change layer number
-
Change resolution
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Change the type of geometry elements
-
Choose appropriate format
-
Columns management
-
Compares bit patterns with raster
-
Compress and decompress raster
-
Computes a coordinate transformation based on the control points
-
Concentric circles
-
Connect nodes by shortest route (traveling salesman)
-
Connect selected nodes by shortest tree (Steiner tree)
-
Convert 2D vector to 3D by sampling raster
-
Convert 2D vector to 3D vector by sampling of elevation raster. Default sampling by nearest neighbour
-
Convert GRASS binary vector to GRASS ASCII vector
-
Convert boundaries to lines
-
Convert centroids to points
-
Convert coordinates from one projection to another (cs2cs frontend)
-
Convert lines to boundaries
-
Convert points to centroids
-
Convert vector to raster using attribute values
-
Convert vector to raster using constant
-
Convex hull
-
Copy also attribute table (only the table of layer 1 is currently supported)
-
Create 3D volume map based on 2D elevation and value rasters
-
Create a MASK for limiting raster operation
-
Create a map containing concentric rings
-
Create a raster plane
-
Create aspect raster from DEM (digital elevation model)
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create new GRASS location and transfer data into it
-
Create new GRASS location from metadata file
-
Create new GRASS location from raster data
-
Create new GRASS location from vector data
-
Create new layer with category values based upon user's reclassification of categories in existing raster
-
Create new location from .prj (WKT) file
-
Create new raster by combining other rasters
-
Create new vector by combining other vectors
-
Create new vector with current region extent
-
Create nodes on network
-
Create parallel line to input lines
-
Create points along input lines
-
Create points/segments from input vector lines and positions
-
Create quantization file for floating-point raster
-
Create random 2D/3D vector points
-
Create random cell values with spatial dependence
-
Create random raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create slope raster from DEM (digital elevation model)
-
Create standard vectors
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
DXF vector layer
-
Database file
-
Database management
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Develop map
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector attributes
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
E00 vector layer
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export from GRASS
-
Export raster as non-georeferenced PNG image format
-
Export raster from GRASS
-
Export raster series to MPEG movie
-
Export raster to 8/24bit TIFF image at the resolution of the current region
-
Export raster to ASCII text file
-
Export raster to ESRI ARCGRID
-
Export raster to GRIDATB.FOR map file (TOPMODEL)
-
Export raster to Geo TIFF
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to VTK-ASCII
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extract features from vector
-
Extract selected features
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
File management
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Filter image
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Hydrologic modelling
-
Imagery
-
Import ASCII raster
-
Import DXF vector
-
Import ESRI ARC/INFO ASCII GRID
-
Import ESRI E00 vector
-
Import GDAL supported raster
-
Import GDAL supported raster and create a fitted location
-
Import GRIDATB.FOR (TOPMODEL)
-
Import MapGen or MatLab vector
-
Import OGR vector
-
Import OGR vector and create a fitted location
-
Import OGR vectors in a given data source combining them in a GRASS vector
-
Import SPOT VGT NDVI
-
Import SRTM HGT
-
Import US-NGA GEOnet Names Server (GNS) country file
-
Import all OGR/PostGIS vectors in a given data source and create a fitted location
-
Import attribute tables in various formats
-
Import binary MAT-File(v4)
-
Import binary raster
-
Import from database into GRASS
-
Import geonames.org country files
-
Import into GRASS
-
Import loaded raster
-
Import loaded raster and create a fitted location
-
Import loaded vector
-
Import loaded vector and create a fitted location
-
Import only some layers of a DXF vector
-
Import raster from ASCII polygon/line
-
Import raster from coordinates using univariate statistics
-
Import raster into GRASS
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Input table
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage features
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Network analysis
-
Network maintenance
-
Number of rows to be skipped
-
Others
-
Output GML file
-
Output Shapefile
- Frálags shapeskrá
+
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Projection conversion of vector
-
Projection management
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reports
-
Reports and statistics
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
-
Split lines to shorter segments
-
Statistics
-
Sum raster cell values
-
Surface management
-
Tables management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Terrain analysis
-
Tests of normality on vector points
-
Text file
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform features
-
Transform image
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
-
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
optionsDialog
Warning!
-
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -62420,59 +62461,59 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Current Rules
-
Add Rule
-
Rule
-
Layer #1
-
Layer #2
-
Tolerance
-
Layer1ID
-
Layer2ID
-
No layer
- Ekkert lag
+
Delete Rule
-
@@ -62480,7 +62521,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid second geometry.
-
Topology plugin
-
Invalid first geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
visualThread
Max. len:
-
Min. len:
-
Mean. len:
-
Filled:
-
Empty:
-
N:
-
Mean:
-
StdDev:
-
Sum:
-
Min:
-
Max:
-
CV:
-
Number of unique values:
-
Range:
-
Median:
-
Observed mean distance:
-
Expected mean distance:
-
Nearest neighbour index:
-
Z-Score:
-
@@ -62680,17 +62721,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- Form
+
Open number input dialog
-
...
- ...
+
@@ -62698,12 +62739,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- Form
+
...
- ...
+
-
+
\ No newline at end of file
diff --git a/i18n/qgis_it.ts b/i18n/qgis_it.ts
index 1bdf013eae2..6e57f55285c 100644
--- a/i18n/qgis_it.ts
+++ b/i18n/qgis_it.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Libreria:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> la tabella di tipo geometrico (geometry_columns) non esiste!
Questa tabella è essenziale a molte applicazioni GIS per elencare le tabelle.
@@ -417,13 +415,13 @@ Questa tabella è essenziale a molte applicazioni GIS per elencare le tabelle.Script:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> La versione degli script installati non corrisponde alla versione degli script di rilascio!
Questo dipende probabilmente da un aggiornamento non corretto di PostGIS.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Questo utente non ha i privilegi per leggere i contenuti della tabella geometry_columns!
Questa tabella è essenziale a molte applicazioni GIS per elencare le tabelle.
@@ -2098,7 +2096,7 @@ Questo può provocare risultati inattesi.
campo della lunghezza
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Impossibile eliminare lo shapefile esistente
%s
@@ -2406,47 +2404,24 @@ Sicuro di voler proseguire?
rimuovi dalla selezione attuale
- Select by location
Seleziona per posizione
- Select features in:
Scegli le geometrie nel:
- that intersect features in:
che intersecano geometrie in:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Modifica la selezione attuale per:
+ Modifica la selezione attuale per:
Use selected features only
- Usa solo le geometrie selezionate
+ Usa solo le geometrie selezionate
Please specify select layer
@@ -3408,7 +3383,7 @@ Il plugin non sarà installato.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4725,7 +4700,7 @@ quando si preme sul pulsante Aiuto del dialogo degli strumenti.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Per esporre dati monobanda con una tabella di colori come set di dati con 3 (RGB) o 4 (RGBA) bande.
Utile per i driver di output come JPEG, JPEG2000, MrSID, ECW che non supportano dati indicizzati per colore.
@@ -5523,7 +5498,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&Modifica
@@ -5543,157 +5518,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Seleziona
- Measure
Misura
- &Decorations
&Decorazioni
- &Layer
&Layer
- New
Nuovo
- &Plugins
&Plugins
- &Help
&Guida
- &Settings
&Impostazioni
- &Raster
&Raster
- Vect&or
Vett&ore
- &OpenStreetMap
&OpenStreetMap
- File
File
- Manage Layers
Gestione layer
- Digitizing
Digitalizzazione
- Advanced Digitizing
Digitalizzazione avanzata
- Map Navigation
Orientazione della mappa
- Attributes
Attributi
- Plugins
Plugin
- Help
Guida
- Raster
Raster
- Label
Etichetta
- Vector
Vettore
- Database
Database
- Web
Web
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Salva come immagine...
- &New Print Composer
&Nuova composizione di stampa
- Ctrl+P
Ctrl+P
- Composer Manager...
Gestore di stampe...
@@ -5713,948 +5688,940 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Nuovo da modello
- Preview Mode
Modalità anteprima
- Paste Features as
Incolla elementi come
- &New
&Nuovo
- &Open...
&Apri...
- &Save
&Salva
- Save &As...
Salva &Come...
- Exit QGIS
Esci da QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
Ann&ulla
- Ctrl+Z
Ctrl+Z
- &Redo
&Ripristina
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Taglia elementi
- Ctrl+X
Ctrl+X
- Copy Features
Copia elementi
- Ctrl+C
Ctrl+C
- Paste Features
Incolla elementi
- Ctrl+V
Ctrl+V
- Add Feature
Aggiungi elemento
- Ctrl+.
Ctrl+.
- Move Feature(s)
Muovi elemento/i
- Reshape Features
Modifica la forma
- Split Features
Spezza elemento
- Split Parts
Dividi parti
- Delete Selected
Elimina il selezionato
- Add Ring
Aggiungi buco
- Add Part
Aggiungi parte
- Simplify Feature
Semplifica geometria
- Delete Ring
Elimina buco
- Delete Part
Elimina parte
- Merge Selected Features
Unisci gli elementi selezionati
- Merge Attributes of Selected Features
Unisci gli attributi degli elementi selezionati
- Node Tool
Strumento vertici
- Rotate Point Symbols
Ruota i simboli per i punti
- Snapping Options...
Opzioni di snap...
- Pan Map
Sposta mappa
- Zoom In
Ingrandisci
- Ctrl++
Ctrl++
- Zoom Out
Rimpicciolisci
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Seleziona il singolo elemento
+ Seleziona il singolo elemento
+ Select Features by Rectangle
- Seleziona elementi con un rettangolo
+ Seleziona elementi con un rettangolo
- Select Features by Polygon
Seleziona elementi con un poligono
- Select Features by Freehand
Seleziona elementi a mano libera
- Select Features by Radius
Seleziona elementi con un cerchio
- Deselect Features from All Layers
Deseleziona gli elementi da tutti i vettori
- Identify Features
Informazioni elementi
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Misura linea
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Misura area
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Misura angolo
- Zoom Full
Zoom completo
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Zoom sul layer
- Zoom to Selection
Zoom alla selezione
- Ctrl+J
Ctrl+J
- Zoom Last
Ultimo zoom
- Zoom Next
Zoom successivo
- Zoom Actual Size
Zoom alla dimensione attuale
- Zoom to Native Pixel Resolution
Zoom alla risoluzione nativa del pixel
- Map Tips
Suggerimenti mappa
- Show information about a feature when the mouse is hovered over it
Mostra informazioni su un elemento quando il mouse vi viene fermato sopra
- New Bookmark...
Nuovo segnalibro...
- Ctrl+B
Ctrl B
- Show Bookmarks
Mostra segnalibri
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Aggiorna
- Text Annotation
Nota testuale
- Form Annotation
Nota con modulo
- Move Annotation
Muovi nota
- Labeling
Etichettatura
- Layer Labeling Options
Opzioni per le etichette del layer
- New Shapefile Layer...
Nuovo shapefile...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Nuovo vettore SpatiaLite ...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Calcolatore raster ...
- Add Vector Layer...
Aggiungi vettore...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Aggiungi raster...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Aggiungi vettore PostGIS...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Aggiungi vettore SpatiaLite...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Aggiungi vettore MSSQL...
- Add Oracle Spatial Layer...
Aggiungi vettore spaziale Oracle...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Aggiungi layer WMS/WMTS...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Apri tabella attributi
- Toggle Editing
Modifica
- Toggles the editing state of the current layer
Attiva/disattiva modifica vettore in uso
- Save for Selected Layer(s)
Salva vettore selezionato/i
- Save edits to current layer, but continue editing
Salva i cambiamenti allo strato corrente, ma continua con la modifica
- Save As...
Salva con nome...
- Add from Layer Definition File...
Aggiungi da un file di definizione del layer...
- Save As Layer Definition File...
Salva come file di definizione del layer...
- Normal
Normale
- Normal preview mode
Modalità anteprima normale
- Simulate Photocopy (Grayscale)
Simula la fotocopia (scala di grigi)
- Simulate photocopy (grayscale)
Simula fotocopia (toni di grigio)
- Simulate Fax (Mono)
Simula il fax (monocolore)
- Simulate fax (mono)
Simula fax (monocolore)
- Simulate Color Blindness (Protanope)
Simula il daltonismo (protanopia)
- Simulate color blindness (protanope)
Simula daltonismo (protanopia)
- Simulate Color Blindness (Deuteranope)
Simula il daltonismo (deuteranopia)
- Simulate color blindness (deuteranope)
Simula daltonismo (deuteranopia)
- Set Scale Visibility of Layer(s)
Fissa la scala di visibilità del/dei layer
- Remove Layer(s)
Elimina layer
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Imposta SR del/i layer
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Imposta SR progetto dal layer
- Properties...
Proprietà...
- Query...
Filtro...
- Add to Overview
Aggiungi alla panoramica
- Add All to Overview
Aggiungi tutto alla panoramica
- Remove All from Overview
Rimuovi tutto dalla panoramica
- Show All Layers
Mostra tutti i layer
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Nascondi tutti i layer
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Gestisci e installa plugin...
- Open Field Calculator
Apri calcolatore di campi
- Add Delimited Text Layer...
Aggiungi layer testo delimitato...
- Add Delimited Text Layer
Aggiungi layer testo delimitato
- New Vector Layer
Nuovo vettore
- Paste features in clipboard into a new OGR vector layer.
Incolla gli elementi negli appunti in un nuovo layer vettoriale OGR.
- New Memory Vector Layer
Nuovo vettore in memoria
- Paste features in clipboard into a new memory vector layer.
Incolla gli elementi negli appunti in un nuovo layer vettoriale in memoria.
- Toggle Full Screen Mode
Schermo Intero
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Proprietà progetto...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Opzioni...
- Custom CRS...
SR personalizzato...
- Configure shortcuts...
Configura le scorciatoie...
- Local Histogram Stretch
Stirare l'istogramma locale
- Stretch histogram of active raster to view extents
Stirare l'istogramma del raster attivo all'estensione della vista
- Help Contents
Contenuti della guida
- F1
F1
- API documentation
Documentazione sulle API
- QGIS Home Page
Home Page di QGIS
- Ctrl+H
Ctrl+H
- Check QGIS Version
Controlla la versione di QGIS
- Check if your QGIS version is up to date (requires internet access)
Controlla se la versione di QGIS in uso è aggiornata (richiede il collegamento internet)
- About
Informazioni
- QGIS Sponsors
Sponsor QGIS
- Move Label
Sposta etichetta
- Rotate Label
Ruota l'etichetta
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Ruota etichetta
Ctl (Cmd) incrementa di 15 gradi.
- Change Label
Cambia l'etichetta
- Style Manager...
Gestore di stili...
- Python Console
Console python
- Full histogram stretch
Stiramento completo dell'istogramma
- Stretch Histogram to Full Dataset
Stira l'istogramma all'intero raster
- Customization...
Personalizzazione...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Per identificare una geometria, prima scegli un vettore cliccando il suo nome nella legenda
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Includi layer e gruppi...
- Embed layers and groups from other project files
Includi layer e gruppi da altri progetti
- &Copyright Label
Etichetta ©right
- Creates a copyright label that is displayed on the map canvas.
Crea una etichetta di copyright che verrà visualizzata sulla mappa.
- &North Arrow
Freccia &nord
- "Creates a north arrow that is displayed on the map canvas"
"Crea una freccia orientata a nord da visualizzare sulla mappa"
- &Scale Bar
Barra di &scala
- Creates a scale bar that is displayed on the map canvas
Crea una barra di scala che verrà visualizzata sulla mappa
- Add WFS Layer...
Aggiungi vettore WFS...
- Add WFS Layer
Aggiungi vettore WFS
- Feature Action
Azione su elemento
- Run Feature Action
Avvia azione sull'elemento
- Pan Map to Selection
Sposta la mappa sulla selezione
- Touch zoom and pan
Zoom e sposta col tocco
- Offset Curve
Curva di offset
- Copy style
Copia lo stile
- Paste style
Incolla lo stile
- Add WCS Layer...
Aggiungi layer WCS...
- &Grid
&Reticolo
- Grid
Reticolo
- Pin/Unpin Labels
Appunta/rilascia etichette
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6666,44 +6633,44 @@ Agisce su tutti i vettori editabili
- Highlight Pinned Labels
Evidenzia etichette appuntate
- New Blank Project
Nuovo progetto vuoto
- Local Cumulative Cut Stretch
Stira e taglia l'istogramma locale
- Local cumulative cut stretch using current extent, default limits and estimated values.
Stira e taglia l'istogramma locale usando l'estensione attuale, limiti predefiniti e valori stimati.
- Full Dataset Cumulative Cut Stretch
Stira e taglia l'istogramma all'intero raster
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Stira e taglia l'istogramma locale all'intero raster, limiti predefiniti e valori stimati.
- Show/Hide Labels
Mostra/nascondi etichette
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6715,128 +6682,128 @@ Agisce su tutti i vettori editabili attivi al momento
- Html Annotation
Nota HTML
- Duplicate Layer(s)
Duplica vettore/i
- SVG annotation
Nota SVG
- Save for All Layers
Salva per tutti i vettori
- Rollback for All Layers
Rollback per tutti i vettori
- Cancel for All Layers
Annulla per tutti i vettori
- Rollback for Selected Layer(s)
Rollback per il vettore selezionato/i
- Current Edits
Modifiche in uso
- Cancel for Selected Layer(s)
Annulla per il vettore selezionato/i
- Save Layer Edits
Salva modifiche vettore
- Rotate Feature(s)
Ruota elemento/i
- &Download data
&Download dati
- &Import topology from XML
&Importa topologia da XML
- &Export topology to SpatiaLite
&Esporta topologia in Spatialite
- Increase brightness
Aumenta luminosità
- Decrease brightness
Diminuisci luminosità
- Increase contrast
Aumenta contrasto
- Decrease contrast
Diminuisci contrasto
- Select By Expression
Seleziona per espressione
- Select features using an expression
Seleziona elementi usando un'espressione
- Need commercial support?
Serve supporto commerciale?
- DXF Export...
Esportazione DXF...
- Fill Ring
Riempi buco
@@ -7282,11 +7249,6 @@ Agisce su tutti i vettori editabili attivi al momento
Can't save model
Impossibile salvare il modello
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
Il modello non contiene nessun algoritmo o parametro e non può essere eseguito
@@ -7314,7 +7276,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- Impossibile caricare il modello selezionato.
+ Impossibile caricare il modello selezionato.
Riga errata: %s
@@ -8164,22 +8126,22 @@ Riga errata: %s
Valutazione derivate regolari...
- minidump written to %1
minidump scritto a %1
- writing of minidump to %1 failed (%2)
scrittura del minidump a %1 fallita (%2)
- creation of minidump to %1 failed (%2)
creazione del minidump a %1 fallita (%2)
- Crash dumped
Creato un dump relativo al blocco
@@ -8331,6 +8293,7 @@ Errore(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
SR generato
@@ -8495,85 +8458,85 @@ Errore(%2): %3
Impossibile convertire '%1' in intervallo
- Cannot convert '%1' to boolean
Impossibile convertire '%1' in booleano
- Domain max must be greater than domain min
Il massimo deve essere maggiore del minimo
- Exponent must be greater than 0
Esponente deve essere maggiore di 0
- Invalid regular expression '%1': %2
Errore nell'espressione regolare '%1': %2
- Index is out of range
Indice fuori dall'intervallo
- Cannot convert '%1:%2:%3' to color
Impossibile convertire '%1:%2:%3' in colore
- Cannot convert '%1:%2:%3:%4' to color
Impossibile convertire '%1:%2:%3:%4' in colore
- "%1" is not a valid color ramp
"%1" non è una scala colori valida
- Cannot convert '%1:%2:%3:%4:%5' to color
Impossibile convertire '%1:%2:%3:%4:%5' in colore
- function help for %1 missing
aiuto mancante per la funzione %1
- Operators
Operatori
- Fields and Values
Campi e valori
- Math
Matematica
- Conversions
Conversioni
- Conditionals
Condizioni
@@ -8620,58 +8583,58 @@ Errore(%2): %3
year|years
- Date and Time
Data e ora
- String
Stringa
- Color
Colore
- Geometry
Geometria
- Record
Record
- No root node! Parsing failed?
Nessun nodo root! Analisi fallita?
- (no root)
(nessun root)
- Unary minus only for numeric values.
Meno unario per valori numerici.
- Can't preform /, *, or % on DateTime and Interval
Impossibile eseguire /, *, o % su data/ora e intervallo
- [unsupported type;%1; value:%2]
[tipo;%1 non consentito; valore:%2]
- Column '%1' not found
Colonna '%1' non trovata
@@ -8759,10 +8722,7 @@ Errore(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- la linea %1 contiene %n nodo duplicato in %2
- la linea %1 contiene %n nodi duplicati in %2
-
+ la linea %1 contiene %n nodo duplicato in %2 la linea %1 contiene %n nodi duplicati in %2
Version 0.1
@@ -9886,6 +9847,7 @@ Soltanto %1 di %2 elementi sono stati scritti.
Layers
Layer
@@ -10463,12 +10425,14 @@ Soltanto %1 di %2 elementi sono stati scritti.
Shapefile Postgis Import Tool: strumento per importare shapefile in PostGIS
+ SQL Anywhere plugin
- Plugin SQL Anywhere
+ Plugin SQL Anywhere
+ Store vector layers within a SQL Anywhere database
- Salva vettori in un database SQL Anywhere
+ Salva vettori in un database SQL Anywhere
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS non riesce a trovare l'installazione di GRASS.
Vuoi specificare il percorso (GISBASE) dove è installato GRASS?
@@ -10909,7 +10873,7 @@ Vuoi specificare il percorso (GISBASE) dove è installato GRASS?
Impossibile creare il file %1.qpj
- Fetching features failed.
SQL:%1
Error: %2
@@ -10918,7 +10882,7 @@ SQL:%1
Errore: %2
- Oracle
Oracle
@@ -11381,12 +11345,14 @@ SQL: %1
elemento multi parte
+ Error describing bind parameters
- Errore nella descrizione dei parametri di associazione
+ Errore nella descrizione dei parametri di associazione
+ Error binding parameters
- Errore nei parametri di associazione
+ Errore nei parametri di associazione
Read-only field that generates a UUID if empty.
Campo sola lettura che genera un UUID se vuoto.
-
- Legend
- Legenda
-
QSpatiaLiteDriver
- Error opening database
Errore apertura database
- Error closing database
Errore chiusura database
- Unable to begin transaction
Impossibile iniziare la transazione
- Unable to commit transaction
Impossibile effettuare il commit della transazione
- Unable to rollback transaction
Impossibile effettuare il rollback della transazione
@@ -11591,27 +11552,27 @@ La risposta è stata:
Nessuna interrogazione
- Unable to execute statement
Impossibile eseguire l'istruzione
- Unable to execute multiple statements at a time
Impossibile eseguire istruzioni multiple contemporaneamente
- Unable to reset statement
Impossibile reimpostare l'istruzione
- Unable to bind parameters
Impossibile associare i parametri
- Parameter count mismatch
Incongruenza nel conteggio dei parametri
@@ -11788,61 +11749,61 @@ La risposta è stata:
QGIS è pronto!
- Minimize
Minimizza
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Minimizza la finestra attiva
- Zoom
Zoom
- Toggles between a predefined size and the window size set by the user
Alterna fra una dimensione della finestra predefinita ed una dimensione definita dall'utente
- Bring All to Front
Porta tutto in primo piano
- Bring forward all open windows
Porta in primo piano tutte le finestre aperte
- Current Edits
Modifiche in uso
- Error
Errore
- Failed to open Python console:
Impossibile aprire la console Python:
@@ -11865,138 +11826,138 @@ Contatta gli sviluppatori.
QGIS - %1 ('%2')
- Panels
Pannelli
- Toolbars
Barre degli strumenti
- Window
Finestra
- &Database
&Database
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
Barra di progressione che mostra lo stato di visualizzazione dei layer e molte altre operazioni che richiedono tempo
- Toggle extents and mouse position display
Attiva/disattiva estensioni e visualizzazione posizione del mouse
- Coordinate:
Coordinata:
- Current map coordinate
Coordinata attuale
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Mostra le coordinate della posizione attuale del mouse. Queste sono continuamente aggiornate durante il movimento del mouse. Consente anche l'inserimento di dati, per centrare la mappa sulla posizione specificata. Il formato è lat,long oppure est, nord
- Current map coordinate (lat,lon or east,north)
Coordinate attualmente in uso sulla mappa (lat,long oppure est,nord)
- Scale
Scala
- Current map scale
Scala della mappa corrente
- Displays the current map scale
Mostra la scala attualmente in uso sulla mappa
- Current map scale (formatted as x:y)
Scala attualmente in uso sulla mappa (formattata come x:y)
- Render
Visualizza
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Se selezionato, vengono visualizzati tutti i vettori con le relative proprietà. Se non selezionato, non avverrà alcuna visualizzazione. Questo permette di aggiungere un gran numero di vettori e di cambiarne le proprietà prima che vengano visualizzati.
- Toggle map rendering
Attiva/disattiva la visualizzazione della mappa
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Questa icona mostra se la trasformazione "al volo" delle coordinate del sistema di riferimento è abilitata o no. Un click sull'icona apre le proprietà del progetto per modificarne le caratteristiche.
- CRS status - Click to open coordinate reference system dialog
Stato SR; clicca per aprire la finestra delle coordinate di riferimento spaziale
- Ready
Pronto
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Vista panoramica. Quest'area può essere utilizzata per visualizzare l'estensione attualmente in uso dalla mappa. L'estensione in uso è rappresentata da un rettangolo rosso. Qualsiasi layer può essere aggiunto in questa mappa.
- Overview
Panoramica
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Legenda che mostra tutti i layer attualmente presenti sulla mappa. Per abilitare/disabilitare la vista di un layer fare clic sulla relativa casella di controllo. Un doppio clic su un layer permette di personalizzare l'aspetto ed altre proprietà.
- Layers
Legenda
- Map layer list that displays all layers in drawing order.
Lista dei livelli della mappa che mostra tutti i livelli nell'ordine di disegno.
- Layer order
Ordine dei layer
@@ -12006,394 +11967,388 @@ Contatta gli sviluppatori.
qgis.db personale
- < Blank >
< Vuoto>
- QGIS version
Versione di QGIS
- QGIS code revision
Revisione codice QGIS
- Compiled against Qt
Compilato con Qt
- Running against Qt
Esecuzione con Qt
- Compiled against GDAL/OGR
Compilato con GDAL/OGR
- Running against GDAL/OGR
Esecuzione con GDAL/OGR
- PostgreSQL Client Version
Versione client PostgreSQL
- No support.
Nessun supporto.
- SpatiaLite Version
Versione SpatiaLite
- QWT Version
Versione QWT
- PROJ.4 Version
Versione PROJ.4
- QScintilla2 Version
Versione QScintilla2
- This copy of QGIS writes debugging output.
Questa copia di QGIS scrive messaggi di debug.
- %1 doesn't have any layers
%1 non ha alcun layer
- Invalid Data Source
Sorgente dati non valida
- %1 is not a valid or recognized data source
%1 è una sorgente dati non valida o sconosciuta
- Vector
Vettore
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Impossibile ottenere pannello selezione PostgreSQL dalla sorgente dati.
- %1 is an invalid layer - not loaded
%1 è un layer non valido; non caricato
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 è un layer non valido e non può essere caricato. Per favore caricare il <a href="#messageLog">registro messaggi</a> per ulteriori informazioni.
- QGIS files
File QGIS
- No legend entries selected
Nessuna voce di legenda scelta
- Select the layers and groups you want to remove in the legend.
Scegli i layer e i gruppi da rimuovere dalla legenda.
- Remove layers and groups
Rimuovi layer e gruppi
- Remove %n legend entries?
number of legend items to remove
-
- Elimina %n voce in legenda?
- Elimina %n voci in legenda?
-
+ Elimina %n voce in legenda? Elimina %n voci in legenda?
- %n legend entries removed.
number of removed legend entries
-
- %n voce in legenda eliminata.
- %n voci in legenda eliminate.
-
+ %n voce in legenda eliminata. %n voci in legenda eliminate.
- %1 (%2 type unsupported)
%1 (%2 tipo non fornito)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/de/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Vuoi salvare il progetto corrente? %1
- Invalid Layer
Layer non valido
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Impossibile ottenere pannello selezione SpatiaLite dalla sorgente dati.
- Delimited Text
Testo delimitato
- Cannot get Delimited Text select dialog from provider.
Impossibile ottenere pannello selezione Testo Delimitato dalla sorgente dati.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Impossibile ottenere pannello selezione MSSQL dalla sorgente dati.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Impossibile ottenere pannello selezione Oracle dalla sorgente dati.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Impossibile ottenere pannello selezione WMS dalla sorgente dati.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Impossibile ottenere pannello selezione WCS dalla sorgente dati.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Impossibile ottenere pannello selezione WFS dalla sorgente dati.
- Default failed to open: %1
Impossibile aprire il predefinito: %1
- Default not found: %1
Predefinito non trovato: %1
- Open Template Project
Apri modello di progetto
- Auto-open Project
Apri automaticamente il progetto
- Failed to open: %1
Impossibile aprire: %1
- Not valid project file: %1
File di progetto non valido: %1
- Project failed to open: %1
Impossibile aprire il progetto: %1
- Default template has been reopened: %1
Il template predefinito è stato ri-aperto: %1
- File not found: %1
File non trovato: %1
- Calculating...
Calcolo in corso...
- Abort...
Interrompi...
- Choose a QGIS project file to open
Scegli un progetto QGIS da caricare
- Loading project: %1
Caricamento progetto: %1
- Unable to open project
Impossibile aprire il progetto
- Security warning
Avviso di sicurezza
- project macros have been disabled.
le macro del progetto sono state disabilitate.
- Enable macros
Abilita macro
- Project loaded
Progetto caricato
- Choose a QGIS project file
Scegli un file di progetto QGIS
- Saved project to: %1
Progetto salvato in: %1
- Unable to save project %1
Impossibile salvare il progetto %1
- Choose a file name to save the QGIS project file as
Scegli un nome per il file con cui salvare il progetto QGIS
- Unable to load %1
Impossibile caricare %1
- Choose a file name to save the map image as
Scegli un nome per il file con cui salvare l'immagine della mappa
- Saved map image to %1
Immagine della mappa salvata in %1
- Default system font substituted.
Sostituito il font predefinito di sistema.
- Labeling
Etichettatura
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
Il font del layer <b><u>%1</u></b>non è stato trovato (<i>%2</i>). %3
- Open labeling dialog
Apri la finestra di dialogo dell'etichettatura
@@ -12494,451 +12449,445 @@ Contatta gli sviluppatori.
Data/ora
- Compiled against GEOS
Compilato con GEOS
- Running against GEOS
Esecuzione con GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
Creazione layer fallita. Controlla il <a href="#messageLog">registro</a> per ulteriori informazioni
- Insufficient permissions
Permessi insufficienti
- The project file is not writable.
Il file di progetto non è modificabile.
- DXF export completed
Esportazione DXF completata
- DXF export failed
Esporatione DXF fallita
- Commit errors
Errori d'invio
- Could not commit changes to layer %1
Impossibile applicare le modifiche al vettore %1
- Errors: %1
Errori: %1
- Show more
Mostra altro
- Labeling Options
Opzioni etichette
- Please select a vector layer first
Prima seleziona un vettore
- Layer labeling settings
Impostazioni etichettatura vettore
- Reading raster
Lettura raster
- Cannot write raster error code: %1
Impossibile scrivere raster, codice errore: %1
- Saving done
Salvato correttamente
- Export to vector file has been completed
Esportazione nel file vettoriale completata
- Save error
Errore di scrittura
- Export to vector file failed.
Error: %1
Esportazione nel file vettoriale fallita.
Errore: %1
- No Layer Selected
Nessun layer scelto
- To delete features, you must select a vector layer in the legend
Per cancellare un elemento occorre prima selezionare un vettore dalla legenda
- No Vector Layer Selected
Nessun vettore selezionato
- Deleting features only works on vector layers
La cancellazione degli elementi è possibile solo su vettori
- Provider does not support deletion
Il gestore di questo formato dati non permette l'eliminazione
- Data provider does not support deleting features
Non è possibile eliminare le geometrie per questo formato di dati
- Layer not editable
Vettore non modificabile
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Il vettore selezionato non è modificabile. Seleziona 'Avvia modifica' dalla barra strumenti per la digitalizzazione.
- No Features Selected
Nessuna geometria selezionata
- The current layer has not selected features
Questo vettore non ha geometrie selezionate
- Delete features
Elimina geometrie
- Delete %n feature(s)?
number of features to delete
-
- Elimina %n geometrie?
- Elimina %n geometrie?
-
+ Elimina %n geometrie? Elimina %n geometrie?
- Features deleted
Geometrie cancellate
- Problem deleting features
Problemi nel cancellare le geometrie
- A problem occured during deletion of features
Problemi durante l'eliminazione delle geometrie
- %n feature(s) deleted.
number of features deleted
-
- %n geometria eliminata.
- %n geometrie eliminate.
-
+ %n geometria eliminata. %n geometrie eliminate.
- Merging features...
Sto unendo le geometrie...
- Abort
Interrompi
- Create unique print composer title
Crea titolo univoco per il compositore di stampe
- (title generated if left empty)
(titolo automatico se lasciato vuoto)
- Composer title
Titolo compositore
- Title can not be empty!
Il titolo non può essere vuoto!
- Title already exists!
Titolo già esistente!
- Composer %1
Modello %1
- copy
copia
- No active layer
Nessun layer attivo
- No active layer found. Please select a layer in the layer list
Non è stato trovato alcun layer attivo. Scegline uno dalla lista
- Active layer is not vector
Il layer attivo non è un vettore
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Lo strumento di unione delle geometrie funziona solo con vettori. Scegli un vettore dalla lista
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
L'unione delle geometrie è possibile solo per i vettori in modalità modifica. Per utilizzare lo strumento di unione, vai a Layer->Abilita modifica
- Not enough features selected
Entità selezionate non sufficienti
- The merge tool requires at least two selected features
Lo strumento di unione richiede la selezione di almeno due geometrie
- Merged feature attributes
Attributi geometria uniti
- Merge failed
Unione non riuscita
- An error occured during the merge operation
Si è verificato un errore durante l'operazione di merge
- Union operation canceled
Operazione di unione annullata
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
L'operazione di unione avrebbe restituto un tipo di geometria che non è compatibile con il tipo di layer corrente e per tale motivo è stata annullata
- Merged features
Geometrie unite
- No active vector layer
Nessun vettore attivo
- To select features, choose a vector layer in the legend
Per selezionare un elemento, scegli prima un vettore dalla legenda
- Features cut
Geometrie tagliate
- Features pasted
Geometrie incollate
- Paste features
Incolla elementi
- no features could be successfully pasted.
nessun elemento può essere incollato.
- %1 features were successfully pasted.
%1 elementi sono stati incollati con successo.
- %1 of %2 features could be successfully pasted.
%1 di %2 elementi sono stati incollati con successo.
- Pasted
Incollato
- New memory layer name
Nome del nuovo layer in memoria
- Layer name
Nome layer
- No features in clipboard.
Nessun elemento negli appunti.
- No features with geometry found, point type layer will be created.
Nessun elemento con geometria trovato, verrà creato un vettore di punti.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Trovate geometrie multiple, gli elementi con geometrie differenti rispetto a %1 verranno create senza geometrie.
- Cannot create new layer
Impossibile creare nuovo layer
- Cannot create field %1 (%2,%3)
Impossibile creare il campo %1 (%2,%3)
- Cannot copy style: %1
Impossibile copiare lo stile: %1
- Cannot parse style: %1:%2:%3
Impossibile analizzare lo stile: %1:%2:%3
- Cannot read style: %1
Impossibile leggere lo stile: %1
- Start editing failed
Impossibile attivare la modifica
- Provider cannot be opened for editing
Il gestore della sorgente dati non permette l'apertura in modifica
- Stop editing
Interrompi modifica
- Do you want to save the changes to layer %1?
Vuoi salvare le modifiche effettuate al vettore %1?
- Problems during roll back
Problemi durante il ripristino
- Could not %1 changes to layer %2
Errors: %3
@@ -12949,343 +12898,340 @@ Errori: %3
- rollback
rollback
- cancel
annulla
- Save
Salva
- all
tutto
- Rollback
Rollback
- Cancel
Annulla
- Current edits
Modifiche in uso
- %1 current changes for %2 layer(s)?
%1 modifiche correnti per i %2 layer(s)?
- copy
copia
- Plugin layer
Plugin layer
- Memory layer
Memory layer
- Duplicate layer:
Duplica layer:
- %1 (duplication resulted in invalid layer)
%1 (duplicazione conclusa con un layer non valido)
- Set scale visibility for selected layers
Imposta la scala di visibilità per i layer selezionati
- Couldn't load Python support library: %1
Impossibile caricare la libreria di supporto Python: %1
- Couldn't resolve python support library's instance() symbol.
Impossibile risolvere il simbolo di istance() della libreria di supporto python.
- Python support ENABLED :-)
Supporto Python ABILITATO :-)
- There is a new version of QGIS available
È disponibile una nuova versione di QGIS
- You are running a development version of QGIS
Si sta utilizzando una versione di sviluppo di QGIS
- You are running the current version of QGIS
Si sta utilizzando l'ultima versione di QGIS
- Would you like more information?
Vuoi avere maggiori informazioni?
- QGIS Version Information
Informazioni sulla versione di QGIS
- QGIS - Changes since last release
QGIS - Cambiamenti dall'ultima release
- Unable to get current version information from server
Impossibile recuperare informazioni sulla versione
- Connection refused - server may be down
Connessione rifiutata; probabilmente il server ha problemi
- QGIS server was not found
Non è possibile raggiungere il server QGIS
- Unknown network socket error: %1
Errore nel socket della rete: %1
- Unable to communicate with QGIS Version server
%1
Impossibile mettersi in contatto con il server delle versioni QGIS
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
Per creare uno stiramento completo dell'istogramma, seleziona un raster.
- To change brightness or contrast, you need to have a raster layer selected.
Per cambiare la luminosità od il contrasto, devi avere selezionato un layer raster.
- en
documentation language
en
- Layer is not valid
Il layer non è valido
- The layer %1 is not a valid layer and can not be added to the map
Il layer %1 non è valido e non può essere aggiunto alla mappa
- The layer is not a valid layer and can not be added to the map
Questo layer non è valido e non può essere aggiunto alla mappa
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Il progetto ha uno (o più) layer con delle modifiche in corso, che NON saranno salvate!
- Save?
Salvare?
- Current CRS: %1 (OTFR enabled)
SR attuale: %1 (riproiezione abilitata)
- Current CRS: %1 (OTFR disabled)
SR attuale: %1 (riproiezione disabilitata)
- Map coordinates for the current view extents
Coordinate mappa dell'estensione della vista attuale
- Map coordinates at mouse cursor position
Coordinate mappa alla posizione del mouse
- Extents:
Estensione:
- Maptips require an active layer
Maptips richiede un layer attivo
- %n feature(s) selected on layer %1.
number of selected features
-
- %n elemento selezionato dal layer %1.
- %n elementi selezionati dal layer %1.
-
+ %n elemento selezionato dal layer %1. %n elementi selezionati dal layer %1.
- Open a GDAL Supported Raster Data Source
Apre un raster consentito da GDAL
- Error adding valid layer to map canvas
Errore nell'aggiungere un layer valido alla mappa
- Raster layer
Layer raster
- %1 is not a supported raster data source
%1 è una sorgente dati raster non supportata
- Unsupported Data Source
Sorgente dati non supportata
- Exit QGIS
Esci da QGIS
- Do you really want to quit QGIS?
Vuoi chiudere QGIS?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Questo progetto è stato salvato utilizzando una versione precedente di QGIS. Salvando questo progetto, QGIS lo aggiornerà all'ultima versione, forse rendendolo inutilizzabile per le versioni precedenti di QGIS.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Questo file di progetto è stato salvato con una vecchia versione di QGIS. Salvando questo file, QGIS lo aggiornerà automaticamente all´ultima versione rendendolo così difficile da leggere per le vecchie versioni di QGIS.<p>Ad ogni nuova versione gli sviluppatori di QGIS cercano di conservare la compabilità con la versione precedente, ma alcune delle informazioni contenute nel file possono essere perse. Per migliorare la qualità di QGIS siamo molto contenti di ricevere bug report a %3. Fare attenzione di includere il vecchio file di progetto e la versione di QGIS con cui l´errore si è verificato.<p>Per eliminare questo messaggio di attenzione ogni volta che si apre un vecchio file di progetto, basta deselezionare la relativa voce nel box '%5' contenuta nel menu %4.<p>Versione del file di progetto: %1<br>Version di QGIS attualmente in uso: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Impostazioni:Opzioni:Generale</tt>
- Warn me when opening a project file saved with an older version of QGIS
Avvisami quando carico un file di progetto salvato con una vecchia versione di QGIS
- Project file is older
Il file di progetto è di una versione precedente
- This project file was saved by an older version of QGIS
Questo file di progetto è stato salvato con una vecchia versione di QGIS
- Please check the <a href="#messageLog">message log</a> for further info.
Controlla il <a href="#messageLog">registro</a> per ulteriori informazioni.
- A network request timed out, any data received is likely incomplete.
Una richista di rete è scaduta. E' probabile che i dati ricevuti siano incompleti.
- Warning
Attenzione
- This layer doesn't have a properties dialog.
Questo layer non ha una finestra di dialogo delle proprietà.
- Authentication required
Autenticazione richiesta
- Proxy authentication required
Richiesta autenticazione proxy
- SSL errors occured accessing URL %1:
Errori SSL nell'accedere all'URL %1:
-
Always ignore these errors?
@@ -13294,13 +13240,10 @@ Always ignore these errors?
Ignora sempre questi errori?
- %n SSL errors occured
number of errors
-
- si è verificato un errore SSL
- sono avvenuti %n errori SSL
-
+ si è verificato un errore SSL sono avvenuti %n errori SSL
@@ -13332,7 +13275,7 @@ Ignora sempre questi errori?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13682,19 +13625,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
Eccezione
- unknown exception
Eccezione sconosciuta
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13718,7 +13661,7 @@ Percorso di ricerca SVG: %8
Percorso DB utente: %9
-
match indentation of application state
@@ -13726,24 +13669,24 @@ Percorso DB utente: %9
- [ERROR] Can not make qgis.db private copy
[ERRORE] Copia privata di qgis.db non riuscita
- Could not open qgis.db
Impossibile aprire qgis.db
- Migration of private qgis.db failed.
%1
Migrazione del qgis.db personale fallita.
%1
- Update of view in private qgis.db failed.
%1
Impossibile aggiornare la vista in qgis.db dell'utente.
@@ -13753,28 +13696,28 @@ Percorso DB utente: %9
QgsAtlasComposition
- Atlas filter eval error: %1
Errore nella valutazione del filtro per l'atlante: %1
- Composer
Compositore
- No matching atlas features
Nessuna corrispondenza geometrie atlante
- Atlas feature %1 of %2
Geometria atlante %1 di %2
- Atlas filename evaluation error: %1
Errore nella valutazione del nome del file per l'atlante: %1
@@ -13791,7 +13734,7 @@ Percorso DB utente: %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Impossibile impostare il pattern del nome del file come '%1'.
@@ -14486,10 +14429,7 @@ Errore di analisi:
Attribute table - %1 (%n Feature(s))
feature count
-
- Tabella degli attributi - %1 (%n elemento)
- Tabella degli attributi - %1 (%n elementi)
-
+ Tabella degli attributi - %1 (%n elemento) Tabella degli attributi - %1 (%n elementi)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Vuoi davvero cancellare il segnalibro?
- Vuoi davvero cancellare %n segnalibri?
-
+ Vuoi davvero cancellare il segnalibro? Vuoi davvero cancellare %n segnalibri?
QgsCategorizedSymbolRendererV2Model
- Symbol
Simbolo
- Value
Valore
- Label
Etichetta
@@ -15272,49 +15209,49 @@ Database:%2
Avanzato
- Random colors
Colori casuali
- Symbol levels...
Livelli simbolo...
- High number of classes!
Numero di classi alto!
- Classification would yield %1 entries which might not be expected. Continue?
La classificazione restituirebbe %1 voci inaspettate. Continuare?
- Error
Errore
- There are no available color ramps. You can add them in Style Manager.
Non ci sono rampe colori disponibili. Puoi aggiungerle nel gestore di stili.
- The selected color ramp is not available.
La scala di colori selezionata non è disponibile.
- Confirm Delete
Conferma eliminazione
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Il campo di classificazione è cambiato da '%1' a '%2'.Devono essere cancellate le classi esistenti prima della classificazione?
@@ -15371,25 +15308,20 @@ Should the existing classes be deleted before classification?
QgsColorButton
- Select Color
Seleziona colore
- Copy color
Copia colore
- Paste color
Incolla colore
-
- Pick color
-
QgsColorDialog
@@ -15461,7 +15393,7 @@ Should the existing classes be deleted before classification?
Composer
Compositore
@@ -15620,8 +15552,8 @@ Should the existing classes be deleted before classification?
Set as atlas feature for %1
Imposta come geometria atlante %1
@@ -15658,7 +15590,7 @@ Should the existing classes be deleted before classification?
Choose a file name to save the map as
Scegli un nome di file per salvare la mappa
@@ -15669,15 +15601,15 @@ Should the existing classes be deleted before classification?
Empty filename pattern
Pattern nome di file vuoto
The filename pattern is empty. A default one will be used.
Il pattern nome di file è vuoto. Ne verrà usato uno predefinito.
@@ -15688,15 +15620,15 @@ Should the existing classes be deleted before classification?
Unable to write into the directory
Impossibile scrivere nella cartella
The given output directory is not writable. Cancelling.
La cartella di output fornita non è scrivibile. Annullamento operazione.
@@ -15706,251 +15638,251 @@ Should the existing classes be deleted before classification?
Atlas processing error
Errore durante l'elaborazione dell'atlante
Feature filter parser error: %1
Errore nell'elaborazione del filtro delle geometrie: %1
Error creating %1.
Errore nella creazione %1.
Rendering maps...
Sto disegnando le mappe...
Abort
Interrompi
- Big image
Immagine grande
- To create image %1x%2 requires about %3 MB of memory. Proceed?
La creazione di una immagine %1 x %2 richiede circa %3 MB di memoria. Procedere?
- Choose a file name to save the map image as
Scegli un nome di file per salvare l'immagine della mappa
- Memory Allocation Error
Errore allocazione memoria
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
Creare un'immagine #%1( %2x%3 @ %4dpi ) può causare un superamento della memoria disponibile.
Prova una risoluzione minore o una minor dimensione di stampa
- Image export error
Errore nell'esportazione dell'immagine
- Directory where to save image files
Cartella dove salvare i file immagine
- Image format:
Formato immagine:
- SVG warning
Avviso SVG
- Don't show this message again
Non mostrare più questo messaggio
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>La funziona di esportazione SVG in QGIS ha diversi problemi causati da bug e limitazioni nel
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
dovute al codice SVG delle Qt4. In particolare ci sono problemi con i layer che non sono tagliati all'interno dei confini del box della mappa.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Se serve un formato vettoriale come output da QGIS e l´output SVG ottenuto non è soddisfacente, si consiglia di utilizzare la stampa su PostScript</p>
- SVG Format
Formato SVG
- Directory where to save SVG files
Cartella dove salvare i file SVG
- SVG export error
Errore nell'esportazione SVG
- on page
nella pagina
- SVG error
Errore SVG
- There was an error in SVG output for SVG layer
C'è stato un errore nell'output SVG per il layer SVG
- copy
copia
- Duplicating composer...
Duplicazione composizione in corso...
- Duplicate Composer
Duplica composizione
- Composer duplication failed.
Duplicazione composizione fallita.
- Save template
Salva modello
- Composer templates
Modelli di stampa
- Save error
Errore di scrittura
- Error, could not save file
Errore, impossibile salvare il file
- Load template
Carica modello
- Read error
Errore di lettura
- Error, could not read file
Errore, impossibile leggere il file
- Composer error
Errore di composizione
- Error, could not create new composer
Errore, impossibile creare nuova composizione
- Loading template into composer...
Caricamento modello nel compositore in corso...
- Project contains WMS layers
Progetto contenente livelli WMS
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Alcuni servers WMS (es. UMN mapserver) hanno dei limiti per i parametri WIDTH e HEIGHT. Stampare layer da questi server può superare il limite imposto. In tal caso, il layer WMS non verrà stampato
- Project contains composition effects
Il progetto contiene effetti di composizione
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
In questo progetto sono abilitati effetti di composizione quali modalità fusione o trasparenza dei vettori, che non vengono gestiti in stampe vettoriali. Viene raccomandata la stampa come raster.
- Print as raster
Stampa come raster
- Landscape
Orizzontale
@@ -17095,67 +17027,67 @@ Prova una risoluzione minore o una minor dimensione di stampa
QgsComposerItemWidget
- Frame color changed
Colore del riquadro modificato
- Background color changed
Colore di sfondo modificato
- Item position changed
Posizione dell'oggetto modificata
- Item outline width
Dimensione bordo dell' oggetto
- Item frame join style
Stile di giunzione cornice dell'oggetto
- Item frame toggled
Cornice dell'oggetto abilitata
- Item background toggled
Sfondo dell'oggetto abilitato
- Select background color
Scegli il colore di sfondo
- Select frame color
Scegli il colore del riquadro
- Item blend mode changed
Modalità di fusione oggetto cambiata
- Item transparency changed
Trasparenza dell'oggetto cambiata
- Item id changed
ID oggetto modificato
- Item rotation changed
Rotazione dell'oggetto modificata
@@ -17168,115 +17100,104 @@ Prova una risoluzione minore o una minor dimensione di stampa
Opzioni globali
- Position and size
Posizione e dimensione
- Reference point
Punto di riferimento
- X
X
- Y
Y
- Width
Larghezza
- Height
Altezza
- Page
Pagina
- ...
- ...
-
-
- Rotation
Rotazione
- °
°
- Frame
Cornice
- mm
mm
- Join style
Stile unione
- Rendering
Visualizzazione
- Blending mode
Modalità fusione
- Thickness
Spessore
- Color...
Colore...
- Background
Sfondo
- Transparency
Trasparenza
- Item ID
ID oggetto
- Id
Id
@@ -17309,18 +17230,18 @@ Prova una risoluzione minore o una minor dimensione di stampa
Cambiato colore dell'etichetta
- Insert expression
Inserisci espressione
- Label alignment changed
Allineamento etichetta modificato
@@ -17426,8 +17347,9 @@ Prova una risoluzione minore o una minor dimensione di stampa
QgsComposerLegend
+ Legend
- Legenda
+ Legenda
@@ -17592,12 +17514,12 @@ Prova una risoluzione minore o una minor dimensione di stampa
Gruppo legenda aggiunto
- Map %1
Mappa %1
- None
Nessuno
@@ -18027,107 +17949,100 @@ Prova una risoluzione minore o una minor dimensione di stampa
QgsComposerMap
- Map %1
Mappa %1
- Map will be printed here
La mappa verrà stampata qui
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Visualizza
- Rectangle
Rettangolo
- Solid
Pieno
- Cross
Croce
- Markers
-
-
- Decimal
Decimale
- DegreeMinute
GradiMinuti
- DegreeMinuteSecond
GradiMinutiSecondi
+ No frame
- Nessuna cornice
+ Nessuna cornice
- Zebra
Zebrato
- Map scale changed
Scala della mappa modificata
- Map rotation changed
Rotazione della mappa modificata
- Map extent changed
Estensione della mappa modificata
- Select font color
Scegli il colore del carattere
@@ -18143,235 +18058,164 @@ Prova una risoluzione minore o una minor dimensione di stampa
Scegli il colore di riempimento del riquadro del reticolo
- Canvas items toggled
Oggetti mappa abilitati
- None
Nessuno
- Overview frame style changed
Stile della cornice della panoramica modificato
- Overview centering mode changed
Modalità di centramento panoramica cambiata
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
- Millimetri
-
-
- Centimeter
-
-
- change...
- modifica...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Casella di controllo del reticolo abilitata
- Grid interval changed
Intervallo del reticolo modificato
- Grid offset changed
Offset reticolo modificato
- Grid line style changed
Stile della linea del reticolo modificato
- Grid type changed
Tipo di reticolo modificato
+ Grid cross width changed
- Dimensioni croci reticolo modificate
+ Dimensioni croci reticolo modificate
- Annotation font changed
Carattere della nota modificato
+ Label font changed
- Carattere etichetta modificato
+ Carattere etichetta modificato
- Annotation distance changed
Distanza della nota modificata
- Annotation format changed
Formato della nota modificato
- Annotation toggled
Nota abilitata
- Changed annotation precision
Precisione della nota cambiata
- Changed grid frame style
Stile cornice reticolo modificato
+ Changed grid frame width
- Spessore cornice reticolo modificata
+ Spessore cornice reticolo modificata
- Changed grid frame line thickness
Spessore linea della cornice del reticolo modificato
- Grid frame color changed
Colore del riquadro del reticolo modificato
- Grid frame first fill color changed
Primo colore di riempimento del riquadro del reticolo modificato
- Grid frame second fill color changed
Secondo colore di riempimento del riquadro del reticolo modificato
- Inside frame
Cornice interna
- Outside frame
Cornice esterna
- Disabled
Disabilitato
- Horizontal
Orizzontale
- Vertical
Verticale
- Annotation position changed
Posizione della nota modificata
- Changed annotation direction
Direzione della nota cambiata
- Map %1
Mappa %1
@@ -18384,377 +18228,287 @@ Prova una risoluzione minore o una minor dimensione di stampa
Opzioni mappa
- Map
Mappa
- Main properties
Proprietà principali
- Update preview
Aggiorna anteprima
- Scale
Scala
- Map rotation
Rotazione mappa
- Draw map canvas items
Disegna elementi sulla mappa
- Lock layers for map item
Blocca i layers per la mappa
- Extents
Estensione mappa
- X max
X Max
- Y min
Y min
- Y max
Y Max
- Set to map canvas extent
Imposta all'estensione della mappa
- X min
X min
- View extent in map canvas
Vedi l'estensione sulla mappa
- Controlled by atlas
Controllato dall'atlante
- Margin around feature
Margine attorno all'elemento
- %
%
- Fixed scale
Scala fissa
- Use one of the predefined scales of the project where the atlas feature best fits.
Usa una delle scale predefinite del progetto dove si adattano meglio le geometrie dell'atlante.
- Predefined scale (best fit)
Scala predefinita (miglior adattamento)
+ Show grid
- Visualizza reticolo
+ Visualizza reticolo
+ Grid &type
- &Tipo reticolo
+ &Tipo reticolo
- Offset
Offset
- mm
mm
- Blend mode
Modalità fusione
- Interval
Intervallo
- Grid frame
Cornice reticolo
- Frame size
Dimensione cornice
- Frame line thickness
Spessore linea cornice
- Color...
Colore...
- Frame fill colors
Colori riempimento cornice
- Marker style
- Stile indicatore
-
-
- Overview blending mode
Panoramica modalità fusione
- Invert overview
Inverti panoramica
- Center on overview
Centra sulla panoramica
- X
X
- °
°
- Y
Y
- Cross width
Spessore della croce
- Frame style
Stile cornice
- Line style
Stile linea
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Tipo reticolo
-
-
- CRS
-
-
- change...
modifica...
- Interval units
-
-
- Map unit
-
-
- Millimeter
- Millimetri
-
-
- Centimeter
-
-
- No frame
- Nessuna cornice
-
-
- Zebra
- Zebrato
-
-
- Draw coordinates
Scrivi coordinate
- Format
Formato
- Left
Sinistra
- Right
Destra
- Top
Cima
- Bottom
Fondo
- Font
Carattere
- Font...
Carattere...
- Font color
- Colore carattere
-
-
- Distance to map frame
Distanza dal bordo della mappa
- Coordinate precision
Precisione delle coordinate
- Font color...
Colore carattere...
- Overview
Panoramica
- Overview frame
Cornice panoramica
- Overview style
Stile panoramica
- Change...
Cambia ...
@@ -18795,18 +18549,18 @@ Prova una risoluzione minore o una minor dimensione di stampa
QgsComposerPicture
- Picture expression parsing error: %1
Errore nell'analisi dell'espressione dell'immagine: %1
- Composer
Compositore
- Picture expression eval error: %1
Errore nella valutazione dell'espressione dell'immagine: %1
@@ -18821,64 +18575,64 @@ Prova una risoluzione minore o una minor dimensione di stampa
Picture changed
Immagine cambiata
- Expression based image path
Percorso dell'immagine basato su espressione
- Picture rotation changed
Rotazione dell'immagine modificata
- Select new preview directory
Scegli una cartella di anteprima
- Picture resize mode changed
Modalità di ridimensionamento dell'immagine modificata
- Picture placement changed
Posizione dell'immagine modificata
- Picture source changed
Sorgente dell'immagine modificata
- Picture source expression
Espressione della sorgente dell'immagine
- Rotation synchronisation toggled
Sincronizzazione rotazione abilitata
- Rotation map changed
Rotazione della mappa modificata
- Map %1
Mappa %1
- Creating icon for file %1
Crea icone dal file %1
@@ -19045,32 +18799,32 @@ Prova una risoluzione minore o una minor dimensione di stampa
QgsComposerScaleBar
- units
unità
- km
km
- m
m
- miles
miglia
- ft
piedi
- Nm
miglia nautiche
@@ -19079,38 +18833,38 @@ Prova una risoluzione minore o una minor dimensione di stampa
QgsComposerScaleBarWidget
Single Box
Riquadro singolo
Double Box
Riquadro doppio
Line Ticks Middle
Linea con tacche al centro
Line Ticks Down
Linea con tacche in basso
Line Ticks Up
Linea con tacche in alto
Numeric
Numerico
@@ -19150,144 +18904,119 @@ Prova una risoluzione minore o una minor dimensione di stampa
Miglia nautiche
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Scegli il colore del carattere
-
-
- Select stroke color
-
-
- Map %1
Mappa %1
- Scalebar map changed
Barra di scala della mappa modificata
- Scalebar line width
Spessore della linea barra di scala
- Scalebar segment size
Dimensione segmento barra di scala
- Scalebar segments left
Segmenti di sinistra della barra di scala
- Number of scalebar segments changed
Numero di segmenti della barra di scala modificato
- Scalebar height changed
Altezza barra di scala modificata
- Scalebar font changed
Tipo di carattere barra di scala modificata
- Scalebar font color changed
Colore carattere barra di scala modificato
- Scalebar color changed
Colore barra di scala modificato
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Colore tratto barra di scala modificato
- Scalebar unit text
Unità di testo barra di scala
- Scalebar map units per segment
Unità mappa per segmenti della barra di scala
- Scalebar style changed
Stile barra di scala modificato
- Scalebar label bar space
Spazio etichetta della barra di scala
- Scalebar box content space
Spazio del contenuto del box della barra di scala
- Scalebar alignment
Alineamento barra di scala
- Scalebar changed to map units
Barra di scala modificata in unità di mappa
- Scalebar changed to feet
Barra di scala modificata in piedi
- Scalebar changed to nautical miles
Barra di scala modificata in miglia nautiche
- Scalebar changed to meters
Barra di scala modificata in metri
- Scalebar line join style
Stile di giunzione linea della barra di scala
- Scalebar line cap style
Stile testata della linea della barra di scala
@@ -19430,11 +19159,6 @@ Prova una risoluzione minore o una minor dimensione di stampa
Secondary fill color...
-
-
- Stroke color...
Colore tratto...
@@ -19444,37 +19168,37 @@ Prova una risoluzione minore o una minor dimensione di stampa
Ellipse
Ellisse
Rectangle
Rettangolo
Triangle
Triangolo
- Shape style changed
Stile della geometria modificato
- Shape radius changed
Raggio forma modificato
- Shape type changed
Tipo di geometria modificato
@@ -19885,107 +19609,107 @@ Prova una risoluzione minore o una minor dimensione di stampa
QgsComposition
- Label added
Etichetta aggiunta
- Map added
Mappa aggiunta
- Arrow added
Freccia aggiunta
- Scale bar added
Barra di scala aggiunta
- Shape added
Forma aggiunta
- Picture added
Immagine aggiunta
- Legend added
Legenda aggiunta
- Table added
Tabella aggiunta
- Aligned items left
Allinea a sinistra
- Aligned items horizontal center
Oggetti allineati al centro orizzontalmente
- Aligned items vertical center
Oggetti allineati al centro verticalmente
- Aligned items right
Allinea a destra
- Aligned items top
Allinea in alto
- Aligned items bottom
Allinea in basso
- Items locked
Oggetti bloccati
- Items unlocked
Oggetti sloccati
- Item z-order changed
L'ordine z dell'elemento è cambiato
- Remove item group
Rimuovi gruppo di oggetti
- Frame deleted
Cornice cancellata
- Item deleted
Oggetto cancellato
- Multiframe removed
Cornice multipla rimossa
@@ -20042,148 +19766,148 @@ Prova una risoluzione minore o una minor dimensione di stampa
Landscape
Orizzontale
Portrait
Verticale
Map %1
Mappa %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legale (8.5x14 pollici)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Lettera; 8.5x11 pollici)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 pollici)
- ANSI C (17x22 in)
ANSI C (17x22 pollici)
- ANSI D (22x34 in)
ANSI D (22x34 pollici)
- ANSI E (34x44 in)
ANSI E (34x44 pollici)
- Arch A (9x12 in)
Arch A (9x12 pollici)
- Arch B (12x18 in)
Arch B (12x18 pollici)
- Arch C (18x24 in)
Arch C (18x24 pollici)
- Arch D (24x36 in)
Arch D (24x36 pollici)
- Arch E (36x48 in)
Arch E (36x48 polllici)
- Arch E1 (30x42 in)
Arch E1 (30x42 pollici)
- Custom
Personalizzata
@@ -20201,131 +19925,109 @@ Prova una risoluzione minore o una minor dimensione di stampa
Carta e qualità
- Presets
Preimpostazioni
- ...
- ...
-
-
- Width
Larghezza
- Height
Altezza
- Units
Unità
- Number of pages
Numero di pagine
- Orientation
Direzione
- Export resolution
Risoluzione di esportazione
- Print as raster
Stampa come raster
-
- Snap tolerance
- Tolleranza di snap
-
-
- px
- px
-
Change...
Cambia...
- Page background
Sfondo pagina
+ Grid
- Reticolo
+ Reticolo
- dpi
dpi
- World file on
Crea world file
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Offset reticolo
- x:
x:
- y:
y:
+ Spacing
- Spaziatura
+ Spaziatura
+ Snap to alignments
- Aggancia agli allineamenti
+ Aggancia agli allineamenti
+ Tolerance
- Tolleranza
+ Tolleranza
@@ -21502,7 +21204,7 @@ ed il file attuale è [%3]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23241,7 +22943,7 @@ Lasciare vuoto per applicare automaticamente il valore massimo.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Impossibile impostare colonna '%1' come colonna anteprima.
@@ -23570,7 +23272,7 @@ Errore di elaborazione:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23583,7 +23285,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24686,7 +24388,7 @@ MyForms.py deve risiedere nel PYTHONPATH, .qgis/python, o dentro la cartella del
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26004,7 +25706,7 @@ Scegli un file valido.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26956,17 +26658,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Simbolo
- Value
Valore
- Label
Etichetta
@@ -27059,41 +26761,41 @@ p, li { white-space: pre-wrap; }
Avanzato
- Symbol levels...
Livelli simbolo...
- Error
Errore
- There are no available color ramps. You can add them in Style Manager.
Non ci sono rampe colore disponibili. Si possono aggiungere nel manager di stile.
- The selected color ramp is not available.
La scala di colori scelta non è disponibile.
- Warning
Attenzione
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
La classificazione Natural break (Jenks) è O(n2) complessa, la classificazione può richiedere molto tempo.
Premi annulla per interrompere il calcolo degli intervalli o OK per continuare.
- Renderer creation has failed.
Errore nella visualizzazione.
@@ -27277,10 +26979,7 @@ Premi annulla per interrompere il calcolo degli intervalli o OK per continuare.<
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Si è certi di voler eliminare il layer selezionato?
- Si è certi di voler eliminare i %n layer selezionati?
-
+ Si è certi di voler eliminare il layer selezionato? Si è certi di voler eliminare i %n layer selezionati?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29035,7 +28734,7 @@ p, li { white-space: pre-wrap; }</style></head><body style="
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29073,7 +28772,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29146,7 +28845,7 @@ p, li { white-space: pre-wrap;
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css"
@@ -29911,10 +29610,7 @@ alla linea %2 colonna %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- C'è ancora %n layer non gestito che andrà perso se chiudi ora.
- Ci sono ancora %n layer(s) non gestiti che andranno persi su chiudi ora.
-
+ C'è ancora %n layer non gestito che andrà perso se chiudi ora. Ci sono ancora %n layer(s) non gestiti che andranno persi su chiudi ora.
@@ -30044,12 +29740,9 @@ alla linea %2 colonna %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Time out di attesa di risposta dalla rete dopo %n secondi di inattività.
-Può essere un problema della propria connessione di rete oppure un problema lato server WMS.
- Time out di attesa di risposta dalla retae dopo %n secondi di inattività.
-Può essere o un problema della propria connessione di rete o sul lato del server WMS.
-
+ Time out di attesa di risposta dalla rete dopo %n secondi di inattività.
+Può essere un problema della propria connessione di rete oppure un problema lato server WMS. Time out di attesa di risposta dalla retae dopo %n secondi di inattività.
+Può essere o un problema della propria connessione di rete o sul lato del server WMS.
@@ -31244,7 +30937,7 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Impostazione etichettatura vettore
- Label this layer with
Etichetta questo vettore con
@@ -31324,22 +31017,22 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
...
...
@@ -31395,7 +31088,7 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Righe multiple
- Automated placement settings (apply to all layers)
Specifiche di disposizione automatica (si applica a tutti i layer)
@@ -31425,7 +31118,7 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Rendering
Visualizzazione
@@ -31513,7 +31206,7 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Alignment
Allineamento
@@ -31550,7 +31243,7 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Ripeti
- Discourage labels from covering features
Evita che le etichette si sovrappongano alle geometrie
@@ -31645,82 +31338,82 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Contorno
- Labels will not show if larger than this on screen
Le etichette non saranno mostrate se più grandi di questo sullo schermo
- px
px
- Data defined
Definito in funzione dei dati
- X
X
- Y
Y
- Coordinate
Coordinata
- Preserve data rotation values
Mantieni i valori di rotazione
- horizontal
orizzontale
- vertical
verticale
- Label options
Opzioni etichetta
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Il valore < 0 rappresenta una scala più vicina a 1:1, ad esempio -10 = 10:1.<br>Il valore 0 disabilita il limite specifico.
- Maximum
Massimo
- Pixel size-based visibility (labels in map units)
Visibilità basata sulla dimensione del pixel (etichette in unità di mappa)
- Labels will not show if smaller than this on screen
Le etichette non saranno mostrate se più piccole di questo sullo schermo
- Minimum
Minimo
@@ -31730,7 +31423,7 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
<
- Scale-based visibility
Visibilità in base alla scala
@@ -31768,17 +31461,17 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Direzione inversa
- Priority
Priorità
- Low
Bassa
- High
Alta
@@ -31931,7 +31624,7 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Rotation
Rotazione
@@ -31983,17 +31676,17 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Distanza
- outside
esterno
- inside
interno
- Maximum angle between curved characters
Angolo massimo tra caratteri curvi
@@ -32099,62 +31792,62 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Unità del simbolo
- Merge connected lines to avoid duplicate labels
Unisci le linee collegate per evitare la duplicazione delle etichette
- Label every part of multi-part features
Etichetta ogni parte delle geometrie multipart
- Feature options
Opzioni elementi
- Suppress labeling of features smaller than
Elimina l'etichettatura degli elementi più piccoli di
- mm
mm
- Show all labels for this layer (including colliding labels)
Mostra tutte le etichette per questo layer (incluse le etichette che collidono)
- Show upside-down labels
Mostra le etichette capovolte
- never
mai
- when rotation defined
quando la rotazione è definita
- always
sempre
- Limit number of features to be labeled to
Numero massimo di geometrie da etichettare
- Number of features sent to labeling engine, though not all may be labeled
Numero di geometrie inviate al sistema di etichettatura, anche eccedenti il numero massimo etichettabile
@@ -32164,17 +31857,17 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
Posizione
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Deseleziona per scrivere la rotazione derivata dal motore di etichettatura su pin e NULL su non-pin
- Always show
Mostra sempre
- Show label
Mostra etichetta
@@ -32190,12 +31883,12 @@ Può essere o un problema della propria connessione di rete o sul lato del serve
QgsLayerTreeModel
- Double-click to view legend
Doppio click per vedere la legenda
- following %1 items
not displayed
i seguenti %1 elementi
@@ -32253,12 +31946,12 @@ non visualizzati
QgsLegendModel
- Group
Gruppo
- No Legend Available
Nessuna legenda disponibile
@@ -32486,18 +32179,18 @@ non visualizzati
QgsMapCanvas
- canvas
mappa
- Rendering
Visualizzazione
- Canvas refresh: %1 ms
Aggiornamento mappa: %1 ms
@@ -33682,10 +33375,7 @@ non visualizzati
%n more
unread messages
-
- %n ulteriore
- %n ulteriori
-
+ %n ulteriore %n ulteriori
@@ -33821,7 +33511,7 @@ non visualizzati
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Connessione non riuscita - Il nome del server non è stato specificato.
@@ -33830,7 +33520,7 @@ non visualizzati
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Connessione non riuscita - Il nome del database non è stato specificato.
@@ -35383,10 +35073,7 @@ Ulteriori informazioni sull'errore:
Coordinate Reference System (%n available)
crs count
-
- Sistema di Riferimento (%n disponbile)
- Sistemi di Riferimento (%n disponbili)
-
+ Sistema di Riferimento (%n disponbile) Sistemi di Riferimento (%n disponbili)
Solid
Pieno
Dots
Punti
Crosses
Croci
- Detected active locale on your system: %1
Lingua rilevata sul tuo sistema: %1
- To vertex
Al vertice
- To segment
Al segmento
- To vertex and segment
Al vertice e al segmento
- map units
unità mappa
- pixels
pixel
- Semi transparent circle
Cerchio semi trasparente
- Cross
Croce
- None
Nessuno
- QGIS files
File QGIS
- Off
Spento
- QGIS
QGIS
- GEOS
GEOS
- Round
Tondo
- Mitre
Seghettato
- Bevel
Smussato
- Save default project
Salva progetto predefinito
- You must set a default project
Devi impostare un progetto predefinito
- Current project saved as default
Progetto in uso salvato come predefinito
- Error saving current project as default
Errore nel salvare il progetto in uso come predefinito
- Choose a directory to store project template files
Scegli una cartella per salvare i file dei modelli di progetto
@@ -36515,105 +36202,105 @@ Sempre rete: carica sempre dalle rete e non controllare se la cache ha geometrie
Mostra gli elementi visibili nella mappa
- Choose project file to open at launch
Scegli il file progetto da aprire all'avvio
- Create Options - %1 Driver
Crea opzioni - %1 Driver
- Create Options - pyramids
Crea opzioni - piramidi
- Restore UI defaults
Ripristina interfaccia predefinita
- Are you sure to reset the UI to default (needs restart)?
Si è certi di voler ripristinare l'interfaccia alla modalità predefinata (è necessario riavviare)?
- Overwrite
Sovrascrivi
- If Undefined
Se non definito
- Unset
Non impostato
- Prepend
Precede
- Append
Accoda
- Choose a directory
Scegli una cartella
- Enter scale
Inserisci scala
- Scale denominator
Denominatore della scala
- Load scales
Carica scale
- XML files (*.xml *.XML)
File XML (*.xml *.XML)
- Save scales
Salva le scale
- No Stretch
Nessun stiramento
- Stretch To MinMax
Stira a MinMax
- Stretch And Clip To MinMax
Stira e taglia a MinMax
- Clip To MinMax
Taglia a MinMax
@@ -36633,7 +36320,7 @@ Sempre rete: carica sempre dalle rete e non controllare se la cache ha geometrie
General
Generale
@@ -36816,7 +36503,7 @@ Sempre rete: carica sempre dalle rete e non controllare se la cache ha geometrie
...
...
@@ -36932,7 +36619,7 @@ Sempre rete: carica sempre dalle rete e non controllare se la cache ha geometrie
Remove
Rimuovi
@@ -36940,7 +36627,7 @@ Sempre rete: carica sempre dalle rete e non controllare se la cache ha geometrie
Add
Aggiungi
@@ -37200,22 +36887,7 @@ Sempre rete: carica sempre dalle rete e non controllare se la cache ha geometrie
Larghezza minima linea / contorno in millimetri.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Non aprire il modulo dopo la creazione di ogni geometria
@@ -37512,18 +37184,22 @@ Sempre rete: carica sempre dalle rete e non controllare se la cache ha geometrie
Colore...
+ Grid defaults
- Opzioni predefinite del reticolo
+ Opzioni predefinite del reticolo
+ Spacing
- Spaziatura
+ Spaziatura
mm
mm
@@ -37544,370 +37220,372 @@ Sempre rete: carica sempre dalle rete e non controllare se la cache ha geometrie
Snap tolerance
Tolleranza di snap
+ Guide defaults
- Opzioni predefinite delle guide
+ Opzioni predefinite delle guide
- Feature creation
Creazione di geometrie
- Validate geometries
Verifica le geometrie
- Reuse last entered attribute values
Ripeti i valori degli attributi usati per ultimi
- Rubberband
Elastico
- Line color
Colore della linea
- Line width in pixels
Spessore linea in pixel
- Line width
Spessore della linea
- Snapping
Snapping
- Default snap mode
Modalità di snap predefinita
- Default snapping tolerance
Tolleranza di snapping predefinita
- Search radius for vertex edits
Raggio di ricerca per le modifiche dei vertici
- map units
unità mappa
pixels
pixel
- Open snapping options in a dock window (QGIS restart required)
Apri le opzioni di snap in una finestra agganciata (richiede il riavvio di QGIS)
- Vertex markers
Indicatori di vertice
- Marker style
Stile indicatore
- Marker size
Dimensioni indicatore
- Show markers only for selected features
Usa indicatori solo per le geometrie selezionate
- Curve offset tool
Strumento per la curva di offset
- Miter limit
Limite di smusso
- Join style
Stile unione
- Quadrant segments
Segmenti di quadrante
- GDAL driver options
Opzioni del driver GDAL
- Edit Pyramids Options
Modifica le opzioni per le piramidi
- Edit Create Options
Modifica le opzioni di creazione
- GDAL drivers
Driver GDAL
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
In alcuni casi si possono usare più driver GDAL per caricare lo stesso formato raster. Usa l'elenco seguente per specificare quale usare.
- Name
Nome
- ext
estensione
- Flags
Flags
- Description
Descrizione
- CRS for new layers
SR per i nuovi layer
- Select...
Scegli...
- Use &project CRS
Usa il SR del &progetto
- Prompt for &CRS
Richiedi &SR
- Use default CRS displa&yed below
Usa come predefinito il SR &visualizzato sotto
- When a new layer is created, or when a layer is loaded that has no CRS
Quando si crea un nuovo layer, o quando si carica un layer privo di SR
- Default CRS for new projects
SR predefinito per nuovi progetti
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Abilita la riproiezione al volo se il SR del layer aggiunto è diverso dal SR dei layer presenti. Verrà usato quest'ultimo.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Abilita automaticamente la riproiezione al volo se i layer hanno SR differente
- Always start new projects with this CRS
Inizia un nuovo progetto sempre con questo SR
- Enable 'on the &fly' reprojection by default
E&ffettua sempre la riproiezione al volo
- Don't enable 'on the fly' reprojection
Non abilitare la riproiezione al volo
- Default datum transformations
Trasformazioni datum predefinite
- Source CRS
SR sorgente
- Destination CRS
SR destinazione
- Source datum transform
Trasformazione datum sorgente
- Destination datum transform
Trasformazione datum destinazione
- Ask for datum transformation when no default is defined
Chiedi la trasformazione del datum quando non è definito un valore di riferimento
- Override system locale
Sovrascrivi lingua in uso
- Locale to use instead
Lingua alternativa da utilizzare
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Nota:</b>: la sovrascrittura / modifica della lingua in uso richiede di riavviare l'applicazione
- Additional Info
Informazioni aggiuntive
- Detected active locale on your system:
Lingua in uso individuata sul tuo sistema:
- WMS search address
Indirizzo di ricerca WMS
- Timeout for network requests (ms)
Timeout per le richieste di rete (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Periodo di scadenza predefinito per mattonelle WMS-C/WMTS (ore)
- Max retry in case of tile request errors
Numero massimo di tentativi in caso di errore nella richesta della mattonella
- User-Agent
Utente-Agente
- Cache settings
Impostazioni della cache
- Directory
Cartella
- Size [KiB]
Dimensione [KiB]
- Clear
Pulisci
- Use proxy for web access
Usa un proxy per l'accesso web
- Host
Host
- Port
Porta
- User
Utente
- Leave this blank if no proxy username / password are required
Lascia questo spazio vuoto se il proxy non richiede un utente / password
- Password
Password
- Proxy type
Tipo proxy
- Exclude URLs (starting with)
Escludi URL (che iniziano per)
@@ -39883,7 +39561,7 @@ Errore: %2
Il plugin è scomparso
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
Il plugin sembra sia stato installato ma non è recuperabile. Probabilmente il pacchetto del plugin contiene un nome di cartella errato.
È probabile che specificando la lista dei plugin installati si riesca a trovare il plugin. QGIS non è in grado di capire quale sia. Questo vuol dire che è impossibile capire se il plugin è installato o meno e quindi non è possibile informare circa la disponibilità di aggiornamenti. Il plugin può comunque funzionare. Contatta l'autore del plugin e invia una notifica in merito a questo problema.
@@ -40607,7 +40285,7 @@ You need to restart QGIS in order to reload it.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40625,7 +40303,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40643,7 +40321,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41505,156 +41183,156 @@ Selezionare ignora per continuare il caricamento a meno dei layer mancanti. Sele
QgsProjectProperties
- Layer
Layer
- Type
Tipo
- Identifiable
Interrogabile
- Vector
Vettore
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
Restrizioni al sistema di coordinate
- No coordinate systems selected. Disabling restriction.
Nessun sistema di coordinate selezionato. Restrizione disabilitata.
- Selection color
Colore della selezione
- Measure tool (CRS transformation: %1)
Strumento di misura (trasformazione SR: %1)
- Canvas units (CRS transformation: %1)
Unità della mappa (trasformazione SR: %1)
+ OFF
Spento
+ ON
Acceso
- CRS %1 was already selected
Il SR %1 è già stato selezionato
- Coordinate System Restrictions
Restrizioni del sistema di coordinate
- The current selection of coordinate systems will be lost.
Proceed?
L'attuale selezione del sistema di coordinate verrà persa.
Procedere?
- Select print composer
Scegli il compositore di stampe
- Composer Title
Titolo composizione
- Select restricted layers and groups
Seleziona numero limitato di layer e gruppi
- Enter scale
Inserisci scala
- Scale denominator
Denominatore della scala
- Load scales
Carica scale
- XML files (*.xml *.XML)
File XML (*.xml *.XML)
- Save scales
Salva le scale
- Select a valid symbol
Scegli un simbolo valido
- Invalid symbol :
Simbolo non valido:
- Parameters:
Parametri:
+ Select %1 from pull-down menu to adjust radii
Seleziona %1 dal menu in basso per aggiustare il raggio
- Can only use ellipsoidal calculations when CRS transformation is enabled
Solo calcoli elissoidali quando la trasformazione del SR è abilitata
@@ -41679,7 +41357,6 @@ Procedere?
Project title
Titolo del progetto
@@ -41719,37 +41396,37 @@ Procedere?
Salva percorsi
- Measure tool
Strumenti di misura
- Semi-minor
Semiasse minore
- Semi-major
Semiasse maggiore
- Used when CRS transformation is turned off
Usato quando la trasformazione del SR è disattivata
- Canvas units
Unità della mappa
- Meters
Metri
- Feet
Piedi
@@ -41781,98 +41458,98 @@ Procedere?
Server OWS
- Ellipsoid
(for distance calculations)
Ellissoide
(per il calcolo delle distanze)
- Degree
Gradi
- Degree display
Visualizzazione gradi
- Decimal degrees
Gradi decimali
- Degrees, Minutes
Gradi, Minuti
- Degrees, Minutes, Seconds
Gradi, Minuti, Secondi
- Precision
Precisione
- Automatically sets the number of decimal places in the mouse position display
Calcola automaticamente il numero di decimali per la visualizzazione della posizione del mouse sul display
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Il numero di cifre decimali utilizzate per visualizzare la posizione del mouse durante il suo trascinamento sullo schermo è calcolato in modo tale che lo spostamento da un pixel ad un altro cambi rispetto alla posizione sullo schermo
- Automatic
Automatico
- Sets the number of decimal places to use for the mouse position display
Stabilisce il numero di cifre decimali per la visualizzazione della posizione del mouse sul display
- Manual
Manuale
- The number of decimal places for the manual option
Numero della posizione dei decimali per l'opzione manuale
- decimal places
posizioni decimali
- Project scales
Scale di progetto
- ...
...
- Enable 'on the fly' CRS transformation
Abilita la riproiezione al volo
@@ -41882,69 +41559,69 @@ Procedere?
Layer interrogabili
- Project layers
Layer del progetto
- Layer
Layer
- Type
Tipo
- Identifiable
Interrogabile
- Marker
Indicatore
- Line
Linea
- Default symbols
Simboli predefiniti
- Fill
Riempimento
- Color Ramp
Scala di colori
- Transparency
Trasparenza
- %
%
- Style Manager
Gestore stile
- Options
Opzioni
@@ -41954,170 +41631,165 @@ Procedere?
Relazioni
- Project file
- File di progetto
-
-
- Nautical miles
Miglia nautiche
- Assign random colors to symbols
Assegna colori casuali ai simboli
- Service capabilities
Capabilities del servizio
- Person
Persona
- Title
Titolo
- Organization
Organizzazione
- Online resource
Risorsa online
- E-Mail
E-Mail
- Phone
Telefono
- Abstract
Riassunto
- Fees
Tasse
- Access constraints
Vincoli di accesso
- Keyword list
Lista delle parole chiave
- WMS capabilities
Capabilities WMS
- Add geometry to feature response
Aggiungi elemento alla risposta geometrie
- Min. X
X Min
- Min. Y
Y Min
- Max. X
X Max
- Max. Y
Y Max
- Use Current Canvas Extent
Imposta all'estensione della mappa
- Used
Usato
- Exclude composers
Escludi composizioni
- WFS capabilities
Capabilities WFS
- WCS capabilities
Capabilities WCS
- Exclude layers
Escludi layer
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
Qualità delle immagini JPEG ( 10 : immagine piccola - 100 : qualità migliore )
- Published
Pubblicato
- Update
Aggiorna
- Insert
Inserisci
- Delete
Elimina
- Unselect all
Deseleziona tutto
- Select all
Seleziona tutto
@@ -42128,39 +41800,39 @@ Procedere?
Macro
- Advertised URL
URL pubblicato
- Width
Larghezza
- Height
Altezza
- Maximums for GetMap request
Massimi per la richiesta GetMap
- Advertised extent
Estensione pubblicata
- CRS restrictions
Restrizioni SR
- Python macros
Macro Python
@@ -42272,10 +41944,7 @@ Because of this the projection selector will not work...
The where clause returned %n row(s).
returned test rows
-
- Clausola di condizione (where) restituisce %n riga.
- Clausola di condizione (where) restituisce %n righe.
-
+ Clausola di condizione (where) restituisce %n riga. Clausola di condizione (where) restituisce %n righe.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">(new line)
p, li { white-space: pre-wrap; }(new line)
@@ -42349,7 +42018,7 @@ p, li { white-space: pre-wrap; }(new line)
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">(new line)
p, li { white-space: pre-wrap; }(new line)
@@ -42360,7 +42029,7 @@ p, li { white-space: pre-wrap; }(new line)
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">(new line)
p, li { white-space: pre-wrap; }(new line)
@@ -42376,7 +42045,7 @@ p, li { white-space: pre-wrap; }(new line)
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">(new line)
p, li { white-space: pre-wrap; }(new line)
@@ -44042,7 +43711,7 @@ Clicca sul pulsante di aiuto per avere opzioni di creazione valide per questo fo
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45122,10 +44791,7 @@ deviazione standard ×
Filter returned %n feature(s)
number of filtered features
-
- Il filtro ha trovato %n elemento
- Il filtro ha trovato %n elementi
-
+ Il filtro ha trovato %n elemento Il filtro ha trovato %n elementi
@@ -45814,10 +45480,7 @@ deviazione standard ×
Found %n matching feature(s).
test result
-
- Trovata %n geometria corrispondente.
- Trovate %n geometria corrispondenti.
-
+ Trovata %n geometria corrispondente. Trovate %n geometria corrispondenti.
Validation finished (%n error(s) found).
number of geometry errors
-
- Fine della validazione (trovato %n errore).
- Fine della validazione (trovati %n errori).
-
+ Fine della validazione (trovato %n errore). Fine della validazione (trovati %n errori).
%n selected geometries
selected geometries
-
- %n geometria selezionata
- %n geometrie selezionate
-
+ %n geometria selezionata %n geometrie selezionate
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47372,7 +47029,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47985,8 +47642,8 @@ Vuoi davvero sovrascrivere la tabella [%2]?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -48065,124 +47722,152 @@ text-indent:0px;"><br /></p> <hr /></body></h
QgsSqlAnywhereProvider
+ Failed to load interface
- Impossibile caricare l'interfaccia
+ Impossibile caricare l'interfaccia
+ Failed to connect to database
- Collegamento al database fallito
+ Collegamento al database fallito
+ A connection to the SQL Anywhere database cannot be established.
- Non è possibile stabilire un collegamente con il database SQL Anywhere.
+ Non è possibile stabilire un collegamente con il database SQL Anywhere.
+ No suitable key column
- Nessuna colonna utilizzabile come chiave
+ Nessuna colonna utilizzabile come chiave
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- La sorgente della relazione %1 non ha una colonna utilizzabile come chiave univoca.
+ La sorgente della relazione %1 non ha una colonna utilizzabile come chiave univoca.
QGIS richiede che la relazione abbia una colonna di tipo intero non superiore ai 32 bit e che contenga valori univoci.
+ Error loading attributes
- Errore nel caricamento degli attributi
+ Errore nel caricamento degli attributi
+ Ambiguous field!
- Campo ambiguo!
+ Campo ambiguo!
+ Duplicate field %1 found
- Trovato campo duplicato %1
+ Trovato campo duplicato %1
+ Read attempt on an invalid SqlAnywhere data source
- Tentativo di lettura da sorgente dati SqlAnywhere non valida
+ Tentativo di lettura da sorgente dati SqlAnywhere non valida
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Errore nell'inserimento di geometrie
+ Errore nell'inserimento di geometrie
+ Error deleting features
- Errore durante l'eliminazione delle geometrie
+ Errore durante l'eliminazione delle geometrie
+ Error adding attributes
- Errore durante l'aggiunta degli attributi
+ Errore durante l'aggiunta degli attributi
+ Error deleting attributes
- Errore durante la rimozione degli attributi
+ Errore durante la rimozione degli attributi
+ Attribute not found
- Attributo non trovato
+ Attributo non trovato
+ Error updating attributes
- Errore nell'aggiornamento degli attributi
+ Errore nell'aggiornamento degli attributi
+ Error updating features
- Errore nell'aggiornamento delle geometrie
+ Errore nell'aggiornamento delle geometrie
+ Error verifying geometry column %1
- Errore nella verifica della colonna geometrica %1
+ Errore nella verifica della colonna geometrica %1
+ Unknown geometry type
- Tipo di geometria sconosciuto
+ Tipo di geometria sconosciuto
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- La colonna %1 ha un tipo di geometria (%2) che attualmente non è consentito da QGIS.
+ La colonna %1 ha un tipo di geometria (%2) che attualmente non è consentito da QGIS.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- La colonna %1 non è limitata ad un singolo SRID, come richiesto da QGIS.
+ La colonna %1 non è limitata ad un singolo SRID, come richiesto da QGIS.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Poiché QGIS supporta solo dati planari, il fornitore di dati SQL Anywhere trasformerà i dati alla proiezione planare compatibile (SRID=%1).
+ Poiché QGIS supporta solo dati planari, il fornitore di dati SQL Anywhere trasformerà i dati alla proiezione planare compatibile (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Poiché QGIS supporta solo i dati planari e non è stato trovato alcuna proiezione planare compatibile, il fornitore di dati SQL Anywhere tenterà di trasformare i dati a planare WGS 84 (SRID=%1).
+ Poiché QGIS supporta solo i dati planari e non è stato trovato alcuna proiezione planare compatibile, il fornitore di dati SQL Anywhere tenterà di trasformare i dati a planare WGS 84 (SRID=%1).
+ Mixed Spatial Reference Systems
- Sistemi di Riferimento misti
+ Sistemi di Riferimento misti
+ Error checking database ReadOnly property
- Errore nel controllo della proprietà SolaLettura del database
+ Errore nel controllo della proprietà SolaLettura del database
+ Error loading SRS definition
- Errore durante il caricamento della definizione SR
+ Errore durante il caricamento della definizione SR
+ Limited Support of Round Earth SRS
- Supporto limitato del SR di tipo sferico
+ Supporto limitato del SR di tipo sferico
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- La colonna %1 (%2) contiene geometrie che appartengono ad un sistema di rifermento spaziale sferico (SRID=%3). %4.
+ La colonna %1 (%2) contiene geometrie che appartengono ad un sistema di rifermento spaziale sferico (SRID=%3). %4.
Gli aggiornamenti dei valori geometrici saranno disabilitati, e le prestazioni delle interrogazioni potrebbero essere scarse perché non verranno utilizzati gli indici spaziali. Per migliorare le prestazioni si consiglia di creare un indice spaziale in una nuova colonna (meglio se calcolata) che contenga una proiezione planare per queste geometrie. Per maggiori informazione leggere la documentazione relativa ai metodi ST_RID(INT) e ST_Transform(INT) di SQL Anywhere.
@@ -48317,14 +48002,14 @@ Gli aggiornamenti dei valori geometrici saranno disabilitati, e le prestazioni d
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Il simbolo con nome '%1' esiste già.
Sovrascrivere?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
La rampa colore con nome '%1'esiste già.
Sovrascrivere?
@@ -49456,7 +49141,7 @@ C'è stato un problema con il tuo database dei simboli.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50232,37 +49917,25 @@ L'errore è: %2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- SUCCESSO: %n attributo eliminato.
- SUCCESSO: %n attributi eliminati.
-
+ SUCCESSO: %n attributo eliminato. SUCCESSO: %n attributi eliminati.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- ERRORE: %n attributo non eliminato.
- ERRORE: %n attributi non eliminati.
-
+ ERRORE: %n attributo non eliminato. ERRORE: %n attributi non eliminati.
SUCCESS: %n attribute(s) added.
added attributes count
-
- SUCCESSO: %n attributo aggiunto.
- SUCCESSO: %n attributi aggiunti.
-
+ SUCCESSO: %n attributo aggiunto. SUCCESSO: %n attributi aggiunti.
ERROR: %n new attribute(s) not added
not added attributes count
-
- ERRORE: %n nuovo attributo non aggiunto
- ERRORE: %n nuovi attributi non aggiunti
-
+ ERRORE: %n nuovo attributo non aggiunto ERRORE: %n nuovi attributi non aggiunti
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- SUCCESSO: %n attributo modificato.
- SUCCESSO: %n attributi modificati.
-
+ SUCCESSO: %n attributo modificato. SUCCESSO: %n attributi modificati.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- ERRORE: %n cambiamento al valore attributo non applicato.
- ERRORE: %n cambiamenti ai valori attributi non applicati.
-
+ ERRORE: %n cambiamento al valore attributo non applicato. ERRORE: %n cambiamenti ai valori attributi non applicati.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- SUCCESSO: %n geometria eliminata.
- SUCCESSO: %n geometrie eliminate.
-
+ SUCCESSO: %n geometria eliminata. SUCCESSO: %n geometrie eliminate.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- ERRORE: %n geometria non eliminato.
- ERRORE: %n geometrie non eliminati.
-
+ ERRORE: %n geometria non eliminato. ERRORE: %n geometrie non eliminati.
SUCCESS: %n feature(s) added.
added features count
-
- SUCCESSO: %n geometria aggiunta.
- SUCCESSO: %n geometrie aggiunte.
-
+ SUCCESSO: %n geometria aggiunta. SUCCESSO: %n geometrie aggiunte.
ERROR: %n feature(s) not added.
not added features count
-
- ERRORE: %n geometria non aggiunta.
- ERRORE: %n geometrie non aggiunte.
-
+ ERRORE: %n geometria non aggiunta. ERRORE: %n geometrie non aggiunte.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- ERRORE: %n elemento non aggiunto; la sorgente dati non consente l'aggiunta di elementi.
- ERRORE: %n elementi non aggiunti; la sorgente dati non consente l'aggiunta di elementi.
-
+ ERRORE: %n elemento non aggiunto; la sorgente dati non consente l'aggiunta di elementi. ERRORE: %n elementi non aggiunti; la sorgente dati non consente l'aggiunta di elementi.
SUCCESS: %n geometries were changed.
changed geometries count
-
- SUCCESSO: %n geometria cambiata.
- SUCCESSO: %n geometrie cambiate.
-
+ SUCCESSO: %n geometria cambiata. SUCCESSO: %n geometrie cambiate.
ERROR: %n geometries not changed.
not changed geometries count
-
- ERRORE: %n geometria non cambiata.
- ERRORE: %n geometrie non cambiate.
-
+ ERRORE: %n geometria non cambiata. ERRORE: %n geometrie non cambiate.
Options (%n coordinate reference systems available)
crs count
-
- Opzioni (%n sistema di riferimento disponibile)
- Opzioni (%n sistemi di riferimento disponibili)
-
+ Opzioni (%n sistema di riferimento disponibile) Opzioni (%n sistemi di riferimento disponibili)
Coordinate Reference System (%n available)
crs count
-
- Sistema di Riferimento (%n disponbile)
- Sistemi di Riferimento (%n disponbili)
-
+ Sistema di Riferimento (%n disponbile) Sistemi di Riferimento (%n disponbili)
%n Layer(s) selected
selected layer count
-
- %n layer selezionato
- %n layer selezionati
-
+ %n layer selezionato %n layer selezionati
(and %n more)
crs
-
- (e %n in più)
- (e %n in più)
-
+ (e %n in più) (e %n in più)
%n tile requests in background
tile request count
-
- %n mattonella richiesta in background
- %n mattonelle richieste in background
-
+ %n mattonella richiesta in background %n mattonelle richieste in background
, %n cache hits
tile cache hits
-
- , %n trovato in cache
- , %n trovati in cache
-
+ , %n trovato in cache , %n trovati in cache
, %n cache misses.
tile cache missed
-
- , % non trovato in cache.
- , %n non trovati in cache.
-
+ , % non trovato in cache. , %n non trovati in cache.
, %n errors.
errors
-
- , %n errore.
- , %n errori.
-
+ , %n errore. , %n errori.
(and %n more)
crs
-
- (e %n in più)
- (e %n in più)
-
+ (e %n in più) (e %n in più)
%n missing row(s)
-
- %n riga mancante
- %n righe mancanti
-
+ %n riga mancante %n righe mancanti
%n missing column(s)
-
- %n colonna mancante
- %n colonne mancanti
-
+ %n colonna mancante %n colonne mancanti
%n tile requests in background
tile request count
-
- %n mattonella richiesta in background
- %n mattonelle richieste in background
-
+ %n mattonella richiesta in background %n mattonelle richieste in background
, %n cache hits
tile cache hits
-
- , %n trovato in cache
- , %n trovati in cache
-
+ , %n trovato in cache , %n trovati in cache
, %n cache misses.
tile cache missed
-
- , % non trovato in cache.
- , %n non trovati in cache.
-
+ , % non trovato in cache. , %n non trovati in cache.
, %n errors.
errors
-
- , %n errore.
- , %n errori.
-
+ , %n errore. , %n errori.
SaDbTableModel
+ Schema
- Schema
+ Schema
+ Table
- Tabella
+ Tabella
+ Type
- Tipo
+ Tipo
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretazione della linea
+ Interpretazione della linea
+ Geometry column
- Colonna geometrie
+ Colonna geometrie
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Salva connessione
+ Salva connessione
+ Should the existing connection %1 be overwritten?
- Sovrascrivo la connessione %1 esistente?
+ Sovrascrivo la connessione %1 esistente?
+ Failed to load interface
- Impossibile caricare l'interfaccia
+ Impossibile caricare l'interfaccia
+ Test connection
- Prova connessione
+ Prova connessione
+ Connection to %1 was successful
- Connessione a %1 avvenuta con successo
+ Connessione a %1 avvenuta con successo
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Connessione non riuscita. Controlla le impostazioni e riprova.
+ Connessione non riuscita. Controlla le impostazioni e riprova.
Codice di errore SQL Anywhere: %1
Descrizione: %2
@@ -53665,276 +53280,348 @@ Descrizione: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Crea un nuovo collegamento SQL Anywhere
+ Crea un nuovo collegamento SQL Anywhere
+ Connection Information
- Informazioni connessione
+ Informazioni connessione
+ Name
- Nome
+ Nome
+ Host
- Host
+ Host
+ Port
- Porta
+ Porta
+ Server
- Server
+ Server
+ Database
- Database
+ Database
+ Connection Parameters
- Parametri di connessione
+ Parametri di connessione
+ Username
- Nome utente
+ Nome utente
+ Password
- Password
+ Password
+ Name of the new connection
- Nome della nuova connessione
+ Nome della nuova connessione
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Nome o indirizzo IP del computer che ospita il server di database (lasciare vuoto per collegamenti in locale)
+ Nome o indirizzo IP del computer che ospita il server di database (lasciare vuoto per collegamenti in locale)
+ Port number used by the database server (leave blank for default 2638)
- Numero di porta utilizzato dal server di database (lasciare vuoto per il valore preimpostato 2638)
+ Numero di porta utilizzato dal server di database (lasciare vuoto per il valore preimpostato 2638)
+ Name of the database server (leave blank for default server on host)
- Nome del server di database (lasciare vuoto per il server predefinito sul server)
+ Nome del server di database (lasciare vuoto per il server predefinito sul server)
+ Name of the database (leave blank for default database on server)
- Nome del database (lasciare vuoto per il database predefinito sul server)
+ Nome del database (lasciare vuoto per il database predefinito sul server)
+ Additional connection parameters
- Parametri aggiuntivi di collegamento
+ Parametri aggiuntivi di collegamento
+ Database username
- Nome utente database
+ Nome utente database
+ Database password
- Password database
+ Password database
+ Save the connection username in the registry
- Salve il nome utente del collegamento nel registro
+ Salve il nome utente del collegamento nel registro
+ Save Username
- Salva nome utente
+ Salva nome utente
+ &Test Connect
- &Test connessione
+ &Test connessione
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Salva la password di collegamento nel registro (ATTENZIONE: NON SICURO)
+ Salva la password di collegamento nel registro (ATTENZIONE: NON SICURO)
+ Save Password
- Salva password
+ Salva password
+ Encrypt packets using simple encryption
- Cripta pacchetti utilizzanto una criptazione semplice
+ Cripta pacchetti utilizzanto una criptazione semplice
+ Simple Encryption
- Criptazione semplice
+ Criptazione semplice
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Usa la stima per individuare alcune proprietà del layer come la cardinalità, l'estensione, ecc.. (migliora le prestazioni)
+ Usa la stima per individuare alcune proprietà del layer come la cardinalità, l'estensione, ecc.. (migliora le prestazioni)
+ Estimate table metadata
- Stima tabella dei metadati
+ Stima tabella dei metadati
+ Search for geometry columns in tables owned by other users
- Cerca colonne geometrie presenti in tabella di proprietà di altri utenti
+ Cerca colonne geometrie presenti in tabella di proprietà di altri utenti
+ Search other users' tables
- Cerca tabelle di altri utenti
+ Cerca tabelle di altri utenti
SaSourceSelect
+ &Add
- &Aggiungi
+ &Aggiungi
+ &Set Filter
- &Configura filtro
+ &Configura filtro
+ Wildcard
- Wildcard
+ Wildcard
+ RegExp
- RegExp
+ RegExp
+ All
- Tutto
+ Tutto
+ Schema
- Schema
+ Schema
+ Table
- Tabella
+ Tabella
+ Type
- Tipo
+ Tipo
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretazione della linea
+ Interpretazione della linea
+ Geometry column
- Colonna geometrie
+ Colonna geometrie
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Sicuro di rimuovere la connessione %1 e tutti i parametri ad essa associati?
+ Sicuro di rimuovere la connessione %1 e tutti i parametri ad essa associati?
+ Confirm Delete
- Conferma eliminazione
+ Conferma eliminazione
+ Select Table
- Scegli tabella
+ Scegli tabella
+ You must select a table in order to add a layer.
- Occorre selezionare prima una tabella per poter aggiungere un layer.
+ Occorre selezionare prima una tabella per poter aggiungere un layer.
+ Failed to load interface
- Impossibile caricare l'interfaccia
+ Impossibile caricare l'interfaccia
+ Connection failed
- Connessione non riuscita
+ Connessione non riuscita
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Connessione al database %1 non riuscita. Controlla le impostazioni e riprova.
+ Connessione al database %1 non riuscita. Controlla le impostazioni e riprova.
Codice di errore SQL Anywhere: %2
Descrizione: %3
+ No accessible tables found
- Non è stata trovata nessuna tabella disponibile
+ Non è stata trovata nessuna tabella disponibile
+ Database connection was successful, but no tables containing geometry columns were %1.
- La connessione al database ha avuto successo, ma nessuna tabella che contenga colonne geometriche era %1.
+ La connessione al database ha avuto successo, ma nessuna tabella che contenga colonne geometriche era %1.
+ found
- trovato
+ trovato
+ found in your schema
- trovato nel tuo schema
+ trovato nel tuo schema
SaSourceSelectBase
+ Add SQL Anywhere layer
- Aggiungi layer SQL Anywhere
+ Aggiungi layer SQL Anywhere
+ SQL Anywhere Connections
- Connessioni SQL Anywhere
+ Connessioni SQL Anywhere
+ Delete
- Elimina
+ Elimina
+ Edit
- Modifica
+ Modifica
+ New
- Nuovo
+ Nuovo
+ Connect
- Connetti
+ Connetti
+ Search options
- Opzioni di ricerca
+ Opzioni di ricerca
+ Search
- Cerca
+ Cerca
+ Search mode
- Modalità di ricerca
+ Modalità di ricerca
+ Search in columns
- Ricerca in colonne
+ Ricerca in colonne
SaveAsPythonScriptAction
I/O error
- Errore di I/O
+ Errore di I/O
Unable to save edits. Reason:
%s
- Impossibile salvare le modifiche. Causa:
+ Impossibile salvare le modifiche. Causa:
%s
@@ -54269,20 +53956,24 @@ Descrizione: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Aggiungi layer SQL Anywhere...
+ Aggiungi layer SQL Anywhere...
+ Store vector layers within a SQL Anywhere database
- Salva vettori in un database SQL Anywhere
+ Salva vettori in un database SQL Anywhere
+ Invalid Layer
- Layer non valido
+ Layer non valido
+ %1 is an invalid layer and cannot be loaded.
- %1 non è un layer valido e non può essere caricato.
+ %1 non è un layer valido e non può essere caricato.
@@ -55620,7 +55311,7 @@ Lancia ancora il validatore topologico.
context_help
- <h3>Database connection</h3>
<h3>Connessione al database</h3>
@@ -55840,7 +55531,7 @@ tutte ben descritte in <a href="http://en.wikipedia.org/wiki/Kernel_(sta
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55850,7 +55541,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55900,7 +55591,7 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
<h3>Definizione coordinate di riferimento spaziale</h3>
Se QGIS non fornisce le coordinate di riferimento spaziale necessarie è possibile definire un CRS personalizzato.
@@ -55934,7 +55625,7 @@ La definizione di un CRS personalizzato in QGIS richiede una buona conoscenza de
<table>
<tr>
<td>
- <p align='justify'>
+ <p align='justify'>
The QGIS Python Console is an interactive shell for the python command executions.
It also has a python file editor that allows you to edit and save your python scripts.
Both console and editor are based on PyQScintilla2 package.<br>
@@ -55990,7 +55681,7 @@ La definizione di un CRS personalizzato in QGIS richiede una buona conoscenza de
</tr>
</table>
<b><i>Toolbar:</i></b>
- <table width="100%" id='toolbarConsole'>
+ <table width="100%" id='toolbarConsole'>
<tr>
<td><img src="qrc:/images/themes/default/console/iconClearConsole.png" /></td>
<td colspan="2">Clear python console</td>
@@ -56085,8 +55776,8 @@ that will be automatically deleted after running.</li>
<br>
<li><label>Using prepared APIs file:</label> If checked the *.pap file will be used for code completion. To generate a prepared APIs file you have to load least an *.api file and then compile it by clicking on <label>Compile Apis...</label> button.</li>
</ul>
-<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
- <b>Note:</b> To save the state of console's widgets you have to close the Python Console
+<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
+ <b>Note:</b> To save the state of console's widgets you have to close the Python Console
from the close button. This allows you to save the geometry to be restored to the next start.
</p>
@@ -56307,7 +55998,7 @@ This dialog allows you to define the settings for a connection to a Oracle datab
<li> <label>Only look in meta data table</label> Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.
-<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
+<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56322,7 +56013,7 @@ the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied. The table
geometry is determined from the first 100 non-null geometry rows in the table.
<li> <label>Only existing geometry types</label> Only list the existing
-geometry types and don't offer to add others.
+geometry types and don't offer to add others.
</ul>
@@ -56518,10 +56209,10 @@ The field calculator allows you to update fields with expressions.
</td>
<td>value of field <tt>column_name</tt></td>
</tr>
-<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
+<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
<tr><td><tt>number</tt></td><td>number</td></tr>
<tr><td>NULL</td><td>null value</td></tr>
-<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
+<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
<tr><td>ln(<tt>a</tt>)</td><td>natural log (i.e. base e) of <tt>a</tt></td></tr>
<tr><td>log10(<tt>a</tt>)</td><td>log base 10 of <tt>a</tt></td></tr>
<tr><td>log(<tt>a</tt>,<tt>b</tt>)</td><td>log base <tt>b</tt> of <tt>a</tt></td></tr>
@@ -56648,8 +56339,8 @@ Draws a scale bar on the map.
<p>
You can control the style and placement, as well as the labeling of the bar.
QGIS only supports displaying the scale in the same units as your map frame. So
-if the units of your layers are in meters, you can't create a scale bar in
-feet. Likewise if you are using decimal degrees, you can't create a scale bar
+if the units of your layers are in meters, you can't create a scale bar in
+feet. Likewise if you are using decimal degrees, you can't create a scale bar
to display distance in meters.</p> <p>
To add a scale bar:
<ol>
@@ -56707,7 +56398,7 @@ This dialog allows you to define the settings for a connection to a PostgreSQL d
<li> <label>Only look in the geometry_columns table</label> Indicates that only "listed" geometry columns should be used - opposed to scanning all tables for geometry columns.
-<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
+<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56962,8 +56653,8 @@ To avoid digitizing all vertices of the common boundary select <label>Avoi
<a name="crs">
<h4>Coordinate Reference System (CRS) Tab</h4>
</a>
-The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
-<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
+The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
+<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
<p>You can find a coordinate system by entering its name, EPSG code or the QGIS ID and clicking the <label>Find</label> button.
<p>The list of recently used coordinate systems will be available on the bottom for quick access.
@@ -57411,7 +57102,7 @@ Per cancellare un segnalibro, clic sul nome che lo identifica e poi clic sul pul
<p><label>Topology tolerance</label> - the distance in units of the project. If the distance of two points falls short the topological tolerance, they are considered to be the vertex. A topological tolerance value greater than zero slows down the plugin, but you can use not ideal data sources.</p>
<h5>Note</h5>
-<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
+<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
<a name="LayerSettings">
<h4>Transport layer settings</h4>
@@ -57551,6 +57242,7 @@ Queste interrogazioni sono più veloci rispetto a quelle generiche di QGIS, ma p
+ <h3>Create a New SQL Anywhere Connection</h3>
This dialog allows you to define the settings for a connection to a
SQL Anywhere database.
@@ -57579,11 +57271,11 @@ SQL Anywhere database.
<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
-<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
</ul>
- <h3>Crea una nuova connessione SQL Anywhere </h3>
+ <h3>Crea una nuova connessione SQL Anywhere </h3>
Questa finestra di dialogo permette di definire le impostazioni per una connessione a un
database SQL Anywhere.
<p>
@@ -57623,7 +57315,7 @@ database SQL Anywhere.
The open vector layer dialog is used to add vector data to the QGIS map view. Vector data are spatial data described using geometries of points, lines and polygons (enclosed areas).</p>
QGIS supports vector data in a number of formats, including those supported by the OGR library data provider plugin, such as ESRI shape files, MapInfo MIF (interchange format) and MapInfo TAB (native format).</p>
QGIS supports PostGIS layers in a PostgreSQL database and SpatiaLite layers. Support for additional data types (eg. delimited text) is provided by additional data provider plugins. A list of OGR supported vector formats can be found in Appendix A.1 of the User Guide.</p>
-Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
+Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
<h3>Apre finestra di dialogo vettoriale</h3>
@@ -57711,10 +57403,10 @@ It is possible to check how often QGIS will download the list and update informa
from the available repositories.
</p>
<p>
-By checking the 'Show experimental plugins' checkbox, all plugins will be shown
-in the lists, even the ones that are considered 'experimental' by the author.
+By checking the 'Show experimental plugins' checkbox, all plugins will be shown
+in the lists, even the ones that are considered 'experimental' by the author.
-<table border=1 width='95%' align='center'><tr><td>
+<table border=1 width='95%' align='center'><tr><td>
Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
</td></tr></table>
@@ -57870,7 +57562,7 @@ Define placement algorithm for labels. Choose between <label>central point
In the <label>Digitizing</label> tab you can define settings for digitizing line width and color.
<h5>Snapping</h5>
Here you can define a general, project wide snapping tolerance. <p>
-You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
+You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
A layer based snapping tolerance can be defined by choosing <label>Settings</label> (or <label>File</label>) > <label>Project Properties...</label>. In the <label>General</label> tab, section <label>Digitize</label> you can click on <label>Snapping options...</label> to enable and adjust snapping mode and tolerance on a layer basis.
<h5>Vertex markers</h5>
You can define marker style as <label>Semi transparent circle</label>, <label>Cross</label> or <label>None</label> and size; you can also set showing markers only for selected features.
@@ -57984,6 +57676,7 @@ In questa sezione e' possibile visualizzare la lista degli attributi. Per c
+ <h3>Add SQL Anywhere Tables</h3>
This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
<p>
@@ -58022,7 +57715,7 @@ To filter a layer before adding it to the map, either double click on its name o
</a>
Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
- <h3>Aggiungi tabelle SQL Anywhere</h3>
+ <h3>Aggiungi tabelle SQL Anywhere</h3>
Questa finestra permette di aggiungere layer SQL Anywhere (tabelle con una colonna geometria) alla mappa di QGIS.
<p>
<a href="#connect">Connessioni</a><br/>
@@ -58200,7 +57893,7 @@ It is safer to use an explicit coding if the QGIS project needs to be portable.
or degrees/minutes. QGIS is quite permissive in its interpretation of degrees/minutes/seconds.
A valid DMS coordinate will contain three numeric fields with an optional hemisphere prefix or suffix
(N, E, or + are positive, S, W, or - are negative). Additional non numeric characters are
- generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
+ generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
</li>
</ul>
<p>For well known text geometry the following options apply:</p>
@@ -58250,8 +57943,8 @@ are escaped.</p>
(that is, to stop it being treated as a new line, delimiter, or quote character).
</p>
<p>Escape characters that are also quote characters have much more limited effect. They only apply within quotes and only escape themselves. For example, if
-<tt>'</tt> is a quote and escape character, then the string
-<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
+<tt>'</tt> is a quote and escape character, then the string
+<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
</p>
@@ -59137,7 +58830,7 @@ Per supporto inviare una mail a scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -59905,7 +59598,7 @@ Il plugin non sarà abilitato.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -59921,9 +59614,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
<h3>Funzione week()</h3>
@@ -59947,7 +59640,7 @@ Estrae il numero della settimana da un tipo date, od il numero di settimane da u
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -59972,7 +59665,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
@@ -60007,7 +59700,7 @@ Un'espressione condizionale che può essere usata per valutare espressioni
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -60021,7 +59714,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
<h3>Funzione right()</h3>
@@ -60042,7 +59735,7 @@ Restituisce una porzione di stringa contenente gli <i>n</i> caratter
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -60053,7 +59746,7 @@ Questo gruppo contiene le funzioni per manipolare i colori
- <h3>length() function</h3>
Returns the length of a string.
@@ -60066,7 +59759,7 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
<h3>Funzione upper() </h3>
Restituisce la lunghezza di una stringa.
@@ -60084,7 +59777,7 @@ Restituisce la lunghezza di una stringa.
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -60097,7 +59790,7 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
<h3>Funzione upper() </h3>
Converte una stringa in maiuscolo.
@@ -60115,9 +59808,9 @@ Converte una stringa in maiuscolo.
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -60127,8 +59820,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
<h3>Funzione di Bounding box</h3>
Restituisce 1 se le geometrie intersecano il bounding box definito e 0
@@ -60149,7 +59842,7 @@ b → geometria
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -60163,7 +59856,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
<h3>Funzione left()</h3>
@@ -60184,7 +59877,7 @@ Restituisce una porzione di stringa contenente gli <i>n</i> caratter
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -60213,7 +59906,7 @@ Nota:Questa funzione è disponibile solo in alcuni contesti e sarà 0 altirmenti
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -60246,9 +59939,9 @@ Arrotonda un numero per eccesso.
<code>ceil(-4.9) → -4</code><br>
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -60259,7 +59952,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
<h3>Funzione toreal()</h3>
Converte una stringa in un numero reale. Se un valore non può essere convertito in reale non viene alterato nulla (e.g '123.56asd' non è valido). I numeri sono arrotondati solo dopo aver salvato i cambiamenti, se la precisione è più piccola del risultato della conversione.
@@ -60275,7 +59968,7 @@ Converte una stringa in un numero reale. Se un valore non può essere convertito
toreal('123.45') → 123.45</p>
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -60302,7 +59995,7 @@ Trova la coordinata x dell'elemento corrente
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -60331,14 +60024,14 @@ Nessuno
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -60347,8 +60040,8 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
<h3>Funzione strpos()</h3>
Restituisce l'indice dell'espressione regolare presente in una stringa.
@@ -60370,7 +60063,7 @@ Restituisce -1 se l'espressione non viene trovata.
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -60406,7 +60099,7 @@ Questa funzione prende due parametri.
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -60440,7 +60133,7 @@ Nessuno
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -60473,7 +60166,7 @@ Nessuno
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60502,7 +60195,7 @@ geom → la geometria
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -60535,7 +60228,7 @@ Arrotonda un numero per difetto.
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60564,9 +60257,9 @@ geom → la geometria
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -60577,7 +60270,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
<h3>Funzione toint()</h3>
Converte una stringa in un numero intero. Se un valore non può essere convertito in intero non viene alterato nulla (e.g '123.56asd' non è valido).
@@ -60595,7 +60288,7 @@ Converte una stringa in un numero intero. Se un valore non può essere convertit
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -60622,7 +60315,7 @@ Trova la coordinata y dell'elemento corrente
- <h3>tostring() function</h3>
Converts a number to string.
@@ -60635,7 +60328,7 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
<h3>Funzione tostring() </h3>
Converte un numero in una stringa.
@@ -60653,7 +60346,7 @@ Converte un numero in una stringa.
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -60682,7 +60375,7 @@ Nessuno
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -60715,7 +60408,7 @@ Restituisce l'arcotangente di x/y usando il segno dei due parametri per det
atan2(1.0, 1.732) → 0.523611477769969</p>
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -60743,7 +60436,7 @@ Restituisce il seno di un angolo.
sin(1.571) → 0.999999682931835</p>
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -60759,9 +60452,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
<h3>Funzione month()</h3>
@@ -60814,7 +60507,7 @@ Nessuno
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -60830,9 +60523,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
<h3>Funzione day()</h3>
@@ -60856,12 +60549,12 @@ Estrae il giorno da un tipo date, od il numero di giorni da un <code>Inter
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -60885,7 +60578,7 @@ Converte una stringa in un tipo dati Qt data.
<code>todate('2012-05-04') → 2012-05-04</code><br>
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60902,7 +60595,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
<h3>Funzione lpad() </h3>
Restituisce una stringa della lunghezza specificata, riempita usando il carattere di riempimento.
@@ -60923,7 +60616,7 @@ Restituisce una stringa della lunghezza specificata, riempita usando il caratter
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -60952,14 +60645,14 @@ Restituisce l'arcocoseno di un valore in radianti.
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60974,7 +60667,7 @@ Il caricamento di valori da un vettore WFS non è supporato prirma il vettore si
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -61011,7 +60704,7 @@ Questa funzione richiede due parametri.
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -61020,14 +60713,14 @@ Questo gruppo contiene funzioni che agiscono su proprietà geometriche degli ogg
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -61042,7 +60735,7 @@ Il caricamento di valori da un vettore WFS non è supporato prirma il vettore si
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -61071,7 +60764,7 @@ Nessuno
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -61100,7 +60793,7 @@ Restituisce l'esponenziale di un valore
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -61117,7 +60810,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
<h3>Funzione rpad() </h3>
@@ -61140,7 +60833,7 @@ Restituisce una stringa della lunghezza specificata, riempita usando il caratter
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -61184,7 +60877,7 @@ use <code>round(decimal)</code> per arrotondare all'intero più
- <h3>$now function</h3>
Returns the current date and time
@@ -61213,7 +60906,7 @@ Nessuno
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -61228,7 +60921,7 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
<h3>Funzione color_hsl() </h3>
Restituisce una stringa rappresentante un colore sulla base della sua tonalità, saturazione e luminosità
@@ -61248,7 +60941,7 @@ Restituisce una stringa rappresentante un colore sulla base della sua tonalità,
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -61261,8 +60954,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -61308,7 +61001,7 @@ Esponenti più piccoli (minori di 1) ne agevoleranno l'uscita, incominciand
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -61320,7 +61013,7 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
<h3>Funzione convexHull</h3>
Restituisce il poligono convesso di una geometria. Rappresenta la geometria convessa minima che racchiude tutte le geometrie del set.
@@ -61337,7 +61030,7 @@ a → geometria
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -61349,7 +61042,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
<h3>Funzione union</h3>
Restituisce una geometria che rappresenta l'unione dell'insieme di punti delle geometrie.
@@ -61366,7 +61059,7 @@ b → geometria
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61395,7 +61088,7 @@ geom → la geometria
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61424,7 +61117,7 @@ geom → la geometria
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61453,7 +61146,7 @@ geom → la geometria
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -61465,8 +61158,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Funzione contains</h3>
Restituisce vero se e solo se nessun punto di b è esterno ad a, e se almeno un punto di b ricade in a.
@@ -61484,7 +61177,7 @@ geometry → geometria
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -61499,8 +61192,8 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
<h3>funzione wordwrap()</h3>
Restituisce una stringa aggiungendo ritorni a capo su un numero massimo o minimo di caratteri.
@@ -61521,7 +61214,7 @@ Restituisce una stringa aggiungendo ritorni a capo su un numero massimo o minimo
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -61537,7 +61230,7 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
<h3>Funzione color_rgb()</h3>
@@ -61558,7 +61251,7 @@ Restituisce una stringa rappresentante un colore sulla base delle sue componenti
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -61575,7 +61268,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
<h3>Funzione color_cmyka() </h3>
Restituisce una stringa rappresentante un colore sulla base delle sue componenti ciano, magenta, giallo, e nero
@@ -61595,7 +61288,7 @@ Restituisce una stringa rappresentante un colore sulla base delle sue componenti
color_cmyk(100,50,0,10) → '0,115,230'</p>
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -61607,7 +61300,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
<h3>Funzione intersection</h3>
Restituisce una geometria che rappresenta la porzione comune fra la geometria a e la geometria b.
@@ -61624,7 +61317,7 @@ geometry → geometria
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -61634,12 +61327,12 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
@@ -61668,7 +61361,7 @@ Le scale dei colori disponibili variano in base alle varie installazioni di QGIS
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -61679,8 +61372,8 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
@@ -61707,7 +61400,7 @@ Nessuno
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -61722,7 +61415,7 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
<h3>funzione color_hsv()</h3>
Restituisce una rappresentazione stringa di un colore basato sui suoi attributi Hue, Saturation e Brightness (tonalità, saturazione e luminosità).
@@ -61742,7 +61435,7 @@ Restituisce una rappresentazione stringa di un colore basato sui suoi attributi
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -61753,9 +61446,9 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
<h3>Espressione ILIKE</h3>
Restituisce 1 se il primo parametro coincide (non fa differenza maiuscole minuscole) con il modello fornito. LIKE può essere utilizzata al posto di ILIKE per ricerche sensibili maiuscole/minuscole. Funziona anche con i numeri.
@@ -61773,7 +61466,7 @@ None
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -61784,9 +61477,9 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
<h3>Espressione LIKE</h3>
Restituisce 1 se il primo parametro coincide con il secondo parametro fornito. Funziona anche con i numeri.
@@ -61804,7 +61497,7 @@ Nessuno
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61833,7 +61526,7 @@ geom → la geometria
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -61844,7 +61537,7 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
<h3>Funzione geomFromGML</h3>
@@ -61862,7 +61555,7 @@ text → rappresentazione geometrica GML
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -61871,7 +61564,7 @@ Questo gruppo contiene funzioni per maneggiare dati con date e ore.
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -61883,8 +61576,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
<h3>Funzione combine</h3>
Restituisce la combinazione della geometria a e della geometria b.
@@ -61902,9 +61595,9 @@ geometry → geometria
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -61914,8 +61607,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>Funzione intersects</h3>
Restituisce 1 se le geometrie sono spazialmente intersecate (condividono una qualsiasi porzione di spazio) e 0 se invece non sono spazialmente intersecate.
@@ -61933,7 +61626,7 @@ b → geometria
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -61970,7 +61663,7 @@ Restituisce l'arcotangente di x/y usando il segno dei due parametri per det
atan2(1.0, 1.732) → 0.523611477769969</p> {3>?} {3>?} {4>?} {4>?} {4>?} {4>?} {4>?} {4>?} {1,5,10)?} {5 ?} {1 ?} {10 ?} {1,0,10)?} {1 ?} {1,?} {1)?} {1,11,10)?} {10 ?} {10,?} {10)?}
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -61982,8 +61675,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
<h3>Funzione disjoint</h3>
Restituisce 1 se le geometrie non sono "spazialmente intersecate" - ovvero se non condividono nessuno spazio comune.
@@ -62001,7 +61694,7 @@ b → geometria
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -62012,7 +61705,7 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
<h3>Funzione geomFromWKT</h3>
@@ -62030,7 +61723,7 @@ text → Well-Known Text (WKT)
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -62061,43 +61754,7 @@ b → distanza per il buffer
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -62126,10 +61783,10 @@ Nessuno
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -62157,25 +61814,7 @@ Nessuno
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -62187,8 +61826,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Funzione crosses</h3>
Restituisce 1 se le geometrie fornite hanno qualche, ma non tutti, punto in comune.
@@ -62206,7 +61845,7 @@ geometry → geometria
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -62233,7 +61872,7 @@ a → geometria
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -62245,8 +61884,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>Funzione touches</h3>
Restituisce 1 se le geometrie hanno almeno un punto in comune, senza che le loro parti interne siano intersecate.
@@ -62264,7 +61903,7 @@ b → geometria
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -62276,8 +61915,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>Funzione overlaps</h3>
Restituisce 1 se le geometrie condividono una porzione di spazio, hanno le stesse dimensioni, ma non sono contenute una nell'altra.
@@ -62295,7 +61934,7 @@ b → geometria
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -62326,7 +61965,7 @@ Nessuno
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -62355,7 +61994,7 @@ Nessuno
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -62386,7 +62025,7 @@ Nessuno
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -62413,7 +62052,7 @@ b → geometria
<pre> centroid($geometry) → restituisce un punto</pre>
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -62425,8 +62064,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
<h3>Funzione within</h3>
Restituisce 1 se la geometria a è completamente contenuta nella geometria b
@@ -62444,7 +62083,7 @@ geometry → geometria
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -62480,7 +62119,7 @@ $map → "canvas" (all'interno della mappa di QGIS)</pr
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -62492,7 +62131,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
<h3>Funzione distance</h3>
Restituisce la distanza minima (basata su rif spaziale) fra due geometrie nell'unità di progetto.
@@ -62509,7 +62148,7 @@ b → geometria
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -62521,7 +62160,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
<h3>Funzione difference</h3>
Restituisce una geometria che rappresenta la parte di geometria a che non si interseca con la geometria b.
@@ -62538,7 +62177,7 @@ geometry → geometria
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -62549,8 +62188,8 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
@@ -62571,7 +62210,7 @@ Nessuno
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -62583,7 +62222,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
<h3>Funzione symDifference</h3>
Restituisce una geometria che rappresenta la porzione di spazio che NON interseca a e b.
@@ -62600,7 +62239,7 @@ geometry → geometria
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -62629,12 +62268,12 @@ Nessuno
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -62657,7 +62296,7 @@ Converte una stringa in un tipo interval. Può essere usata per recuperare i gi
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -62673,10 +62312,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
<h3>Funzione hour()</h3>
@@ -62702,7 +62341,7 @@ da un <code>Intervallo</code>
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -62718,7 +62357,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
<h3>Funzione color_hsla() </h3>
Restituisce una stringa rappresentante un colore sulla base della sua tonalità, saturazione, luminosità e alfa (trasparenza)
@@ -62739,7 +62378,7 @@ Restituisce una stringa rappresentante un colore sulla base della sua tonalità,
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -62767,7 +62406,7 @@ Nessuno
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
@@ -62775,12 +62414,12 @@ This group contains functions that operate on record identifiers.
Questo gruppo contiene funzioni che operano sugli identificativi dei record.
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -62803,7 +62442,7 @@ Converte una stringa in un tipo dati Qt time.
<code>totime('12:30:01') → 12:30:01</code><br>
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -62818,7 +62457,7 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
<h3>Funzione replace()</h3>
Restituisce una stringa con la stringa specificata sostituita.
@@ -62838,7 +62477,7 @@ Restituisce una stringa con la stringa specificata sostituita.
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
@@ -62846,7 +62485,7 @@ This group contains functions to handle conditional checks in expressions.
Questo gruppo contiene funzioni per eseguire controlli condizionali nelle espressioni.
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -62875,7 +62514,7 @@ abs(<i>value</i>)<br>
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -62905,7 +62544,7 @@ Restituisce il valore più grande in un set di valori.
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -62934,7 +62573,7 @@ Restituisce la radice quadrata di un valore
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
@@ -62943,7 +62582,7 @@ Questo gruppo contiene funzioni che operano sulla condizione.
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -62961,7 +62600,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
<h3>Funzione color_cmyka() </h3>
Restituisce una stringa rappresentante un colore sulla base delle sue componenti ciano, magenta, giallo, nero ed alfa (trasparenza)
@@ -62982,7 +62621,7 @@ Restituisce una stringa rappresentante un colore sulla base delle sue componenti
color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -63019,7 +62658,7 @@ Tronca anche il numero secondo il numero di cifre indicato.
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -63035,9 +62674,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
<h3>Funzione year()</h3>
@@ -63061,7 +62700,7 @@ Estrae l'anno da una data, od il numero di anni da un <code>Intervall
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -63086,7 +62725,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
@@ -63119,7 +62758,7 @@ Un'espressione condizionale che può essere usata per valutare espressioni
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -63155,7 +62794,7 @@ Questa funzione prende due parametri.
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -63184,7 +62823,7 @@ geom → la geometria
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -63227,7 +62866,7 @@ Trasforma un dato valore da un dominio in input ad un intervallo in output usand
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -63240,7 +62879,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
<h3>Funzione trim() </h3>
Rimuove da una stringa ogni spazio bianco (spazi, tab, ecc..) iniziale e finale.
@@ -63258,7 +62897,7 @@ Rimuove da una stringa ogni spazio bianco (spazi, tab, ecc..) iniziale e finale.
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -63274,10 +62913,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
<h3>Funzione minute()</h3>
@@ -63302,7 +62941,7 @@ Estrae il minuto da un tipo datatime o time, od il numero di minuti da un <co
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -63331,9 +62970,9 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
<h3>Funzione age()</h3>
@@ -63371,7 +63010,7 @@ usa <code>day</code> per estrarre il numero di giorni<br>
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -63405,7 +63044,7 @@ Questa funzione richiede un argomento
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
@@ -63414,7 +63053,7 @@ Questo gruppo contiene funzioni per convertire un formato di dati in un'alt
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -63442,7 +63081,7 @@ Restituisce il coseno di un angolo.
cos(1.571) → 0.000796326710733263</p>
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -63451,7 +63090,7 @@ Questo gruppo contiene operatori, es: + - *
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -63467,10 +63106,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
<h3>Funzione second()</h3>
@@ -63495,7 +63134,7 @@ code>date</code> - è di tipo time o datetime. La data da cui estrarre
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -63523,7 +63162,7 @@ Restituisce l'arcotangente di un valore in radianti.
atan(0.5) → 0.463647609000806</p>
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -63551,7 +63190,7 @@ Nessuno
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -63565,7 +63204,7 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
<h3>Funzione title()</h3>
Converte tutte le parole di una stringa nel formato titolo inglese (tutte le parole in minuscolo con l'iniziale
@@ -63582,7 +63221,7 @@ Converte tutte le parole di una stringa nel formato titolo inglese (tutte le par
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -63596,7 +63235,7 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
<h3>Funzione regexp_match()</h3>
Restituisce true se una qualisiasi parte della stinga corrisponde all'espressione regolare fornita.
@@ -63615,7 +63254,7 @@ Restituisce true se una qualisiasi parte della stinga corrisponde all'espre
- <h3>substr() function</h3>
Return a part of a string
@@ -63630,7 +63269,7 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
<h3>Funzione substr()</h3>
Restituisce una porzione di stinga.
@@ -63650,12 +63289,12 @@ Restituisce una porzione di stinga.
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -63680,7 +63319,7 @@ Formatta una stringa secondo gli parametri forniti.
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -63695,7 +63334,7 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
<h3>Funzione regexp_replace()</h3>
Restituisce una stinga sostituendo l'espressione regolare fornita.
@@ -63715,7 +63354,7 @@ Restituisce una stinga sostituendo l'espressione regolare fornita.
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -63729,7 +63368,7 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
<h3>Funzione regexp_substr()</h3>
Restituisce la porzione di stinga corrispondente all'espressione regolare fornita.
@@ -63748,7 +63387,7 @@ Restituisce la porzione di stinga corrispondente all'espressione regolare f
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -63777,7 +63416,7 @@ Nessuno
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -63794,7 +63433,7 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
<h3>Funzione color_rgba()</h3>
@@ -63817,7 +63456,7 @@ Restituisce una stringa che rappresenta un colore basato sulle sue componenti ro
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -63846,7 +63485,7 @@ Nessuno
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
@@ -63855,7 +63494,7 @@ Questo gruppo contiene funzioni matematiche, es: radice quadrate, seno e coseno
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -63885,7 +63524,7 @@ Restituisce il valore più piccolo in un set di valori.
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -63896,7 +63535,7 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
<h3>Funzione lower()</h3>
Converte le lettere di una stringa in minuscolo.
@@ -63912,7 +63551,7 @@ Converte le lettere di una stringa in minuscolo.
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -63941,7 +63580,7 @@ Nessuno
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
@@ -63950,7 +63589,7 @@ Questo gruppo contiene le funzioni che operano sulle stringhe. es: sostituisci,
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -63963,7 +63602,7 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
<h3>Funzione concat()</h3>
Concatena più stringhe in un unica.
@@ -63980,7 +63619,7 @@ Concatena più stringhe in un unica.
concat('a','b','c','d','e') → 'abcde'
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -63997,8 +63636,8 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
<h3>Funzione coalesce()</h3>
@@ -64023,7 +63662,7 @@ Questa funzione può assumere qualsiasi numero di parametri.
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -64051,12 +63690,12 @@ Restituisce l'arcoseno di un valore in radianti.
asin(1.0) → 1.5707963267949</p>
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -64079,12 +63718,12 @@ Converte una stringa in un tipo dati Qt data time.
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -64115,14 +63754,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -64141,14 +63780,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -64253,7 +63892,7 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
<h3>Funzione format_date()</h3>
Formatta un tipo date od una stringa nel un formato specificato. Usa le stringhe nel formato Qt data time. Vedi <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::in stringhe</a>
@@ -64432,7 +64071,7 @@ Formatta un tipo date od una stringa nel un formato specificato. Usa le stringhe
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -64461,7 +64100,7 @@ Restituisce la tangente di un angolo
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -64490,7 +64129,7 @@ Nessuno
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -64525,7 +64164,7 @@ Questa funzione richiede un argomento.
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -64541,7 +64180,7 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
<h3>Funzione color_hsva() </h3>
Restituisce una stringa rappresentante un colore sulla base della sua tonalità, saturazione, valore e alfa (trasparenza)
@@ -67115,4 +66754,4 @@ Restituisce una stringa rappresentante un colore sulla base della sua tonalità,
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_ko.ts b/i18n/qgis_ko.ts
index 2c22b50c16d..3057001d296 100644
--- a/i18n/qgis_ko.ts
+++ b/i18n/qgis_ko.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
라이브러리:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<경고> geometry_columns 테이블이 없습니다!
이 테이블은 여러 GIS 프로그램에서 테이블의 구분을 위해 필수적입니다.
@@ -417,13 +415,13 @@ This table is essential for many GIS applications for enumeration of tables.스크립트:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<경고> 설치된 스크립트의 버전이 릴리즈된 스크립트 버전과 일치 않음!
이는 아마도 잘못된 PostGIS 업그래이드 때문인 듯 함.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<경고> 사용자가 geometry_columns 테이블 읽기 권한 없음!
이 테이블은 여러 GIS 프로그램에서 테이블 구분을 위해 필수적임.
@@ -2098,7 +2096,7 @@ This may cause unexpected results.
길이 필드
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
기존 Shape 파일 %s 삭제 불가
%s
@@ -2407,47 +2405,24 @@ Are you sure you want to proceed?
현재 선택에서 제거
- Select by location
위치별 선택
- Select features in:
다음의 객체를 선택:
- that intersect features in:
객체가 다음과 교차:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- 다음에 의해 현재 선택 수정:
+ 다음에 의해 현재 선택 수정:
Use selected features only
- 선택된 객체만 사용
+ 선택된 객체만 사용
Please specify select layer
@@ -3409,7 +3384,7 @@ Plugin will not be enabled.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4727,7 +4702,7 @@ when pressing on the tool dialog's Help button.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
1 밴드 색상표를 사용하여 데이터셋을 3 (RGB) 또는 4 (RGBA) 밴드의 데이터셋으로 표시합니다.
JPEG, JPEG2000, MrSID, ECW와 같은 컬러 인덱스를 지원하지 않는 데이터 세트의 출력 드라이버에 사용하면 유용합니다.
@@ -5529,7 +5504,7 @@ GEOS 공간 연산 오류: 하나 이상의 객체의 지오메트리가 잘못
MainWindow
- &Edit
편집(&E)
@@ -5549,157 +5524,157 @@ GEOS 공간 연산 오류: 하나 이상의 객체의 지오메트리가 잘못
선택
- Measure
측정
- &Decorations
꾸미기(&D)
- &Layer
레이어(&L)
- New
새로 만들기
- &Plugins
플러그인(&P)
- &Help
도움말(&H)
- &Settings
설정(&S)
- &Raster
래스터(&R)
- Vect&or
벡터(&o)
- &OpenStreetMap
OpenStreetMap(&O)
- File
파일
- Manage Layers
레이어 관리
- Digitizing
디지타이징
- Advanced Digitizing
고급 디지타이징
- Map Navigation
지도 탐색
- Attributes
속성
- Plugins
플러그인
- Help
도움말
- Raster
래스터
- Label
라벨
- Vector
벡터
- Database
데이터베이스
- Web
웹
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
이미지로 저장...
- &New Print Composer
새 인쇄 구성기(&N)
- Ctrl+P
Ctrl+P
- Composer Manager...
구성기 관리자...
@@ -5719,947 +5694,939 @@ GEOS 공간 연산 오류: 하나 이상의 객체의 지오메트리가 잘못
템플릿이용하여 새로 만들기
- Preview Mode
미리보기 모드
- Paste Features as
객체 골라 붙이기
- &New
새로 만들기(&N)
- &Open...
열기(&O)...
- &Save
저장(&S)
- Save &As...
다른 이름으로 저장(&A)...
- Exit QGIS
QGIS 종료
- Ctrl+Q
Ctrl+Q
- &Undo
실행 취소(&U)
- Ctrl+Z
Ctrl+Z
- &Redo
다시 실행(&R)
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
객체 잘라내기
- Ctrl+X
Ctrl+X
- Copy Features
객체 복사
- Ctrl+C
Ctrl+C
- Paste Features
객체 붙여넣기
- Ctrl+V
Ctrl+V
- Add Feature
객체 추가
- Ctrl+.
Ctrl+.
- Move Feature(s)
객체 이동
- Reshape Features
객체 변형
- Split Features
객체 분할
- Split Parts
파트 분리
- Delete Selected
선택 삭제
- Add Ring
링 추가
- Add Part
파트 추가
- Simplify Feature
객체 단순화
- Delete Ring
링 삭제
- Delete Part
파트 삭제
- Merge Selected Features
선택된 객체 병합
- Merge Attributes of Selected Features
선택된 객체의 속성 결합
- Node Tool
노드 도구
- Rotate Point Symbols
점 심볼 회전
- Snapping Options...
맞추기 옵션...
- Pan Map
지도 이동
- Zoom In
확대
- Ctrl++
Ctrl++
- Zoom Out
축소
- Ctrl+-
Ctrl+-
+ Select Single Feature
- 단일 객체 선택
+ 단일 객체 선택
+ Select Features by Rectangle
- 사각형으로 객체 선택
+ 사각형으로 객체 선택
- Select Features by Polygon
폴리곤으로 객체 선택
- Select Features by Freehand
프리핸드로 객체 선택
- Select Features by Radius
반경으로 객체 선택
- Deselect Features from All Layers
모든 레이어에서 객체 선택 해제
- Identify Features
객체 확인
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
선 길이 측정
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
면적 측정
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
각도 측정
- Zoom Full
전체 보기
- Ctrl+Shift+F
Ctrl+Shift+J
- Zoom to Layer
레이어 영역으로 확대
- Zoom to Selection
선택 영역으로 확대
- Ctrl+J
Ctrl+J
- Zoom Last
이전 영역 보기
- Zoom Next
다음 영역 보기
- Zoom Actual Size
실제 크기로 확대
- Zoom to Native Pixel Resolution
기본 픽셀 해상도로 확대
- Map Tips
지도 팁
- Show information about a feature when the mouse is hovered over it
마우스 커서가 위에 있는 객체의 정보가 표시됨
- New Bookmark...
새 북마크....
- Ctrl+B
Ctrl+B
- Show Bookmarks
북마크 목록보기
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
새로고침
- Text Annotation
텍스트 주석
- Form Annotation
양식 주석
- Move Annotation
이동 주석
- Labeling
라벨링
- Layer Labeling Options
레이어 라벨 옵션
- New Shapefile Layer...
새 Shape 파일 레이어...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
새 SpatiaLite 레이어...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
래스터 계산기...
- Add Vector Layer...
벡터 레이어 추가...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
래스터 레이어 추가...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
PostGIS 레이어 추가...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
SpatiaLite 레이어 추가...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
MSSQL Spatial 레이어 추가...
- Add Oracle Spatial Layer...
Oracle Spatial 레이어 추가...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
WMS/WMTS 레이어 추가...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
속성 테이블 열기
- Toggle Editing
편집 전환
- Toggles the editing state of the current layer
현재 레이어의 편집모드를 전환
- Save for Selected Layer(s)
선택된 레이어(들) 저장
- Save edits to current layer, but continue editing
현재 레이어에 편집을 저장 후 편집 작업을 계속함
- Save As...
다른 이름으로 저장...
- Add from Layer Definition File...
레이어 정의 파일에서 추가...
- Save As Layer Definition File...
레이어 정의 파일로 저장...
- Normal
일반
- Normal preview mode
일반 미리보기 모드
- Simulate Photocopy (Grayscale)
복사기 시뮬레이트 (회색조)
- Simulate photocopy (grayscale)
복사기 시뮬레이트 (회색조)
- Simulate Fax (Mono)
팩스 시뮬레이트 (흑백)
- Simulate fax (mono)
팩스 시뮬레이트 (흑백)
- Simulate Color Blindness (Protanope)
색맹 시뮬레이트 (적색맹)
- Simulate color blindness (protanope)
색맹 시뮬레이트 (적색맹)
- Simulate Color Blindness (Deuteranope)
색맹 시뮬레이트 (녹색맹)
- Simulate color blindness (deuteranope)
색맹 시뮬레이트 (녹색맹)
- Set Scale Visibility of Layer(s)
레이어의 축척에 따른 가시 설정
- Remove Layer(s)
레이어(군) 삭제
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
레이어 좌표계 설정
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
레이어에서 프로젝트 좌표계 설정
- Properties...
속성...
- Query...
검색...
- Add to Overview
오버뷰에 추가
- Add All to Overview
오버뷰에 모두 추가
- Remove All from Overview
오버뷰의 모두 제거
- Show All Layers
모든 레이어 표시
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
모든 레이어 숨기기
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
플러그인 관리 및 설치...
- Open Field Calculator
필드 계산기 열기
- Add Delimited Text Layer...
구분자로 분리된 텍스트 레이어를 추가...
- Add Delimited Text Layer
구분자로 분리된 텍스트 레이어를 추가
- New Vector Layer
새 벡터 레이어
- Paste features in clipboard into a new OGR vector layer.
클립보드에 있는 객체를 새로운 OGR 벡터 레이어로 붙여넣기.
- New Memory Vector Layer
새로운 메모리 벡터 레이어
- Paste features in clipboard into a new memory vector layer.
클립보드에 있는 객체를 새로운 메모리 벡터 레이어로 붙여넣기.
- Toggle Full Screen Mode
전체 화면 모드로 전환
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
프로젝트 속성...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
옵션...
- Custom CRS...
사용자 정의 좌표계...
- Configure shortcuts...
단축키 구성...
- Local Histogram Stretch
로컬 히스토그램 스트레치
- Stretch histogram of active raster to view extents
잘 보이게 하기위해 활성 래스터의 히스토그램을 스트레치
- Help Contents
QGIS 도움말
- F1
F1
- API documentation
API 문서
- QGIS Home Page
QGIS 홈페이지
- Ctrl+H
Ctrl+N
- Check QGIS Version
QGIS 버전 확인
- Check if your QGIS version is up to date (requires internet access)
QGIS 버전 업데이트 확인(인터넷 접속 필요)
- About
QGIS 정보
- QGIS Sponsors
QGIS 스폰서
- Move Label
라벨 이동
- Rotate Label
라벨 회전
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Ctrl(Cmd) 키로 라벨 15도씩 회전.
- Change Label
라벨 변경
- Style Manager...
스타일 관리자...
- Python Console
Python 콘솔
- Full histogram stretch
전체 히스토그램 스트레치
- Stretch Histogram to Full Dataset
전체 데이터범위로 히스토그램 늘리기
- Customization...
사용자 정의...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
이것은 바로가기 충돌을 피하기 위해 여기 있음, 이 바로가기는 QgsCustomization에 잡혀 있음
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
레이어와 그룹 활성화...
- Embed layers and groups from other project files
다른 프로젝트 파일의 활성화된 레이어와 그룹
- &Copyright Label
저작권 라벨(&C)
- Creates a copyright label that is displayed on the map canvas.
지도 캔버스에 표시되는 저작권 라벨을 만듭니다.
- &North Arrow
방위표(&N)
- "Creates a north arrow that is displayed on the map canvas"
"지도 캔버스에 표시될 방위표 생성"
- &Scale Bar
스케일바(&S)
- Creates a scale bar that is displayed on the map canvas
지도 캔버스에 표시될 스케일바 만들기
- Add WFS Layer...
WFS 레이어 추가...
- Add WFS Layer
WFS 레이어 추가
- Feature Action
객체 동작
- Run Feature Action
객체 동작 수행
- Pan Map to Selection
선택으로 지도이동
- Touch zoom and pan
터치 줌 및 이동
- Offset Curve
곡선 옵셋
- Copy style
스타일 복사
- Paste style
스타일 붙여넣기
- Add WCS Layer...
WCS 레이어 추가...
- &Grid
격자(&(G)
- Grid
격자
- Pin/Unpin Labels
라벨에 핀 꽂기/뽑기
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6670,44 +6637,44 @@ Shift 핀뽑기, Ctrl(Cmd) 상태 변경
모든 편집가능한 레이어에들 관한 법률들
- Highlight Pinned Labels
핀 꽂힌 라벨들 강조하기
- New Blank Project
빈 프로젝트로 시작
- Local Cumulative Cut Stretch
로컬 누적 컷 스트레치
- Local cumulative cut stretch using current extent, default limits and estimated values.
현재 범위와 기본 한계와 예상값을 이용한 로컬 누적 컷 스트레치.
- Full Dataset Cumulative Cut Stretch
누적 컷 스트레치의 전체 데이터셋
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
전체 데이터셋 범위와 기본 한계와 예상값을 이용한 로컬 누적 컷 스트레치.
- Show/Hide Labels
라벨 보이기/숨김
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6718,128 +6685,128 @@ Acts on currently active editable layer
현재 편집가능한 레이어에들 관한 법률
- Html Annotation
Html 주석
- Duplicate Layer(s)
레이어 복제
- SVG annotation
SVG 주석
- Save for All Layers
모든 레이어의 작업을 저장하기
- Rollback for All Layers
모든 레이어의 작업을 롤백하기
- Cancel for All Layers
모든 레이어의 작업을 취소하기
- Rollback for Selected Layer(s)
선택된 레이어(들)의 작업을 롤백하기
- Current Edits
현재 수정사항
- Cancel for Selected Layer(s)
선택된 레이어(들)의 작업 취소하기
- Save Layer Edits
레이어 수정사항 저장
- Rotate Feature(s)
객체(들) 회전
- &Download data
데이터 다운로드((&D)
- &Import topology from XML
XML 데이터에서 위상정보 가져오기((&I)
- &Export topology to SpatiaLite
위상정보를 SpatiaLite로 내보내기(&E)
- Increase brightness
밝기 증가
- Decrease brightness
밝기 감소
- Increase contrast
대비 증가
- Decrease contrast
대비 감소
- Select By Expression
표현식별 선택
- Select features using an expression
표현식을 이용하여 객체 선택하기
- Need commercial support?
상업적인 지원이 필요하십니까?
- DXF Export...
DXF 내보내기...
- Fill Ring
링 채우기
@@ -7285,11 +7252,6 @@ Acts on currently active editable layer
Can't save model
모델을 저장할 수 없습니다
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
모델에 알고리즘이 없거나 파라미터가 없기에 실행하지 못했습니다
@@ -7317,7 +7279,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- 선택된 모델을 읽을 수 없습니다.
+ 선택된 모델을 읽을 수 없습니다.
오류 행: %s
@@ -8172,22 +8134,22 @@ Wrong line: %s
정상적인 파생을 분석중...
- minidump written to %1
미니덤프가 %1에 기록
- writing of minidump to %1 failed (%2)
미니덤프가 %1에 기록하는 중 실패 (%2)
- creation of minidump to %1 failed (%2)
%1에 미니덤프 만들기 실패 (%2)
- Crash dumped
크래쉬l 덤프
@@ -8339,6 +8301,7 @@ Error(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
만들어진 좌표계
@@ -8503,85 +8466,85 @@ Error(%2): %3
'%1'을 간격으로 변환할 수 없음
- Cannot convert '%1' to boolean
'%1'을 부울 값으로 변환할 수 없음
- Domain max must be greater than domain min
최대 영역은 최소 영역보다 커야합니다
- Exponent must be greater than 0
지수는 0보다 커야합니다
- Invalid regular expression '%1': %2
잘못된 정규식 '%1' %2
- Index is out of range
인덱스가 범위를 벗어남
- Cannot convert '%1:%2:%3' to color
'%1:%2:%3'을 색상으로 변환할 수 없음
- Cannot convert '%1:%2:%3:%4' to color
'%1:%2:%3:%4'을 색상으로 변환할 수 없음
- "%1" is not a valid color ramp
"%1" 은 유효하지 않은 색상표입니다
- Cannot convert '%1:%2:%3:%4:%5' to color
'%1:%2:%3:%4:%5'을 색상으로 변환할 수 없음
- function help for %1 missing
잘못된 %1을 위한 기능 도움말
- Operators
연산자
- Fields and Values
필드와 값
- Math
수학
- Conversions
변환
- Conditionals
조건문
@@ -8628,58 +8591,58 @@ Error(%2): %3
년|년
- Date and Time
날짜와 시간
- String
문자열
- Color
색상
- Geometry
지오메트리
- Record
기록
- No root node! Parsing failed?
루트 노드 없음! 구문 분석 실패?
- (no root)
(루트 없음)
- Unary minus only for numeric values.
단항 마이너스는 숫자 값을 위한 것입니다.
- Can't preform /, *, or % on DateTime and Interval
날짜와 시간, 간격에 /, *, 혹은 %를 형성할 수 없습니다
- [unsupported type;%1; value:%2]
[지원되지 않는 타입: %1; 값: %2]
- Column '%1' not found
컬럼 '%1' 발견 못함
@@ -8767,9 +8730,7 @@ Error(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- 선 %1은 %2에 %n개의 중복 노드를 가지고 있음
-
+ 선 %1은 %2에 %n개의 중복 노드를 가지고 있음
Version 0.1
@@ -9892,6 +9854,7 @@ Only %1 of %2 features written.
Layers
레이어
@@ -10469,12 +10432,14 @@ Only %1 of %2 features written.
Shape 파일을 PostgreSQL/PostGIS로 임포트 도구
+ SQL Anywhere plugin
- SQL Anyware 플러그인
+ SQL Anyware 플러그인
+ Store vector layers within a SQL Anywhere database
- SQL Anywhere 데이터베이스에 벡터 레이어를 저장
+ SQL Anywhere 데이터베이스에 벡터 레이어를 저장
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS이 GRASS 설치 경로를 찾지 못했습니다.
GRASS 설치 경로(GISBASE)를 지정하시겠습니까?
@@ -10915,7 +10880,7 @@ GRASS 설치 경로(GISBASE)를 지정하시겠습니까?
%1.qpj 파일 만들지 못함
- Fetching features failed.
SQL:%1
Error: %2
@@ -10924,7 +10889,7 @@ SQL:%1
에러: %2
- Oracle
Oracle
@@ -11385,12 +11350,14 @@ SQL: %1
다중 객체
+ Error describing bind parameters
- 바인드 파라미터 설명 오류
+ 바인드 파라미터 설명 오류
+ Error binding parameters
- 파라미터 바인딩 오류
+ 파라미터 바인딩 오류
Read-only field that generates a UUID if empty.
비어있는 경우 UUID 생성 위한 읽기 전용 필드.
-
- Legend
- 범례
-
QSpatiaLiteDriver
- Error opening database
데이터 베이터 여는 중 오류
- Error closing database
데이터베이스 닫는 중 오류
- Unable to begin transaction
트랜잭션을 시작할 수 없음
- Unable to commit transaction
트랜잭션을 실행할 수 없음
- Unable to rollback transaction
트랜잭션을 되돌릴 수 없음
@@ -11595,27 +11557,27 @@ Response was:
질의가 없음
- Unable to execute statement
작업 명령을 실행할 수 없음
- Unable to execute multiple statements at a time
한 번에 다중 작업 명령을 실행할 수 없음
- Unable to reset statement
작업 명령을 초기화할 수 없음
- Unable to bind parameters
파라미터를 결합할 수 없음
- Parameter count mismatch
파라미터 개수가 일치하지 않음
@@ -11792,61 +11754,61 @@ Response was:
QGIS 준비 완료!
- Minimize
최소화
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
활성창을 최소화
- Zoom
확대
- Toggles between a predefined size and the window size set by the user
정의된 크기와 사용자 설정 크기 사이의 전환
- Bring All to Front
모두 전면으로
- Bring forward all open windows
열려있는 모든 창을 앞으로 가져오기
- Current Edits
현재 편집내용
- Error
오류
- Failed to open Python console:
파이썬 콘솔 열기 실패:
@@ -11869,138 +11831,138 @@ Please contact the developers.
QGIS - %1 ('%2')
- Panels
패널
- Toolbars
도구 모음
- Window
윈도우
- &Database
데이터베이스(&D)
- &Web
웹(&W)
- Progress bar that displays the status of rendering layers and other time-intensive operations
레이어 렌더링 등 시간이 걸리는 작업의 상태를 표시하는 진행률 표시줄
- Toggle extents and mouse position display
범위와 마우스 위치 표시간의 전환
- Coordinate:
좌표:
- Current map coordinate
현재 지도 좌표
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
커시 위치의 지도상 좌표를 보여줍니다. 마우스가 움직일때마다 지속적으로 값이 갱신됩니다. 또한 변경하시면 캔버스 중앙의 좌표값을 바꿀 수 있습니다. 형식은 경/위도 혹은 동/북 임
- Current map coordinate (lat,lon or east,north)
현재 지도 좌표 (경/위도 혹은 동/북)
- Scale
축척
- Current map scale
현재 지도 축척
- Displays the current map scale
현재 지도 축척을 표시
- Current map scale (formatted as x:y)
현재 지도 축척(x:y 형식)
- Render
렌더링
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
체크되어 있는 경우 지도 레이어는 탐색 명령과 같은 이벤트 때 렌더링됩니다. 체크되지 않은 경우 렌더링되지 않습니다. 이를 이용해 렌더링하지 않고 많은 레이어를 추가하여 심볼을 줄 수 있습니다.
- Toggle map rendering
지도 렌더링 전환
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
이 아이콘은 실시간 좌표계 변환 활성화 여부를 나타냅니다. 아이콘을 클릭하면이 동작을 변경하기 위한 프로젝트 속성 대화상자가 표시됩니다.
- CRS status - Click to open coordinate reference system dialog
좌표계 상태 - 클릭하면 좌표계 대화상자가 열림
- Ready
준비
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
지도 오버뷰 캔버스. 이 캔버스는 현재 지도 캔버스의 위치를 식별하는 데 사용됩니다. 현재 표시 영역이 빨간색 사각형 으로 표시됩니다. 지도상의 모든 레이어는 오버뷰 캔버스에 추가될 수 있습니다.
- Overview
오버뷰
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
범례에는 지도 캔버스에 있는 모든 레이어가 나타납니다. 체크박스를 클릭하면 레이어를 켜고 끕니다. 범례의 레이어 이름을 두 번 클릭하여 모양 등의 설정을 변경합니다.
- Layers
레이어
- Map layer list that displays all layers in drawing order.
그리기 순서에 보이는 모든 레이어의 맵 레이어 리스트.
- Layer order
레이어 순서
@@ -12010,392 +11972,388 @@ Please contact the developers.
사용자 qgis.db
- < Blank >
< Blank >
- QGIS version
QGIS 버전
- QGIS code revision
QGIS 코드 리버전
- Compiled against Qt
컴파일시 사용된 Qt
- Running against Qt
실행시 사용된 Qt
- Compiled against GDAL/OGR
다음 GDAL/OGR을 이용하여 컴파일됨
- Running against GDAL/OGR
다음 GDAL/OGR을 이용하여 실행중
- PostgreSQL Client Version
PostgreSQL 클라이언트 버전
- No support.
지원 안됨.
- SpatiaLite Version
SpatiaLite 버전
- QWT Version
QWT 버전
- PROJ.4 Version
PROJ.4 버전
- QScintilla2 Version
QScintilla2 버전
- This copy of QGIS writes debugging output.
이 QGIS 버전은 디버깅 정보를 출력합니다.
- %1 doesn't have any layers
%1에 레이어 없음
- Invalid Data Source
잘못된 데이터 소스
- %1 is not a valid or recognized data source
%1은 올바르지 않거나 인식할 수없는 데이터 소스임
- Vector
벡터
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
프로바이더에서 PostgreSQL 선택 대화상자를 받을 수 없습니다.
- %1 is an invalid layer - not loaded
%1은 잘못된 레이어임 - 불러오지 못함
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1이 잘못된 레이어라 읽을 수 없습니다. 추가정보는 <a href="#messageLog">메시지 로그</a>를 확인해 주십시요.
- QGIS files
QGIS 파일
- No legend entries selected
범례 항목이 선택되지 않음
- Select the layers and groups you want to remove in the legend.
범례에서 제거할 레이어와 그룹을 선택하십시오.
- Remove layers and groups
레이어 및 그룹 제거
- Remove %n legend entries?
number of legend items to remove
-
- %n개의 범례 항목을 제거하시겠습니까?
-
+ %n개의 범례 항목을 제거하시겠습니까?
- %n legend entries removed.
number of removed legend entries
-
- %n개의 범례 항목 제거됨.
-
+ %n개의 범례 항목 제거됨.
- %1 (%2 type unsupported)
%1 (%2 형식 지원안됨)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/en/site/forusers/commercial_support.html
- Do you want to save the current project? %1
현재 프로젝트를 저장하시겠습니까? %1
- Invalid Layer
잘못된 레이어
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
프로바이더에서 SpatiaLite 선택 대화상자를 받을 수 없습니다.
- Delimited Text
구분자로 분리된 텍스트
- Cannot get Delimited Text select dialog from provider.
프로바이더에서 구분자로 분리된 텍스트 선택 대화상자를 받을 수 없습니다.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
프로바이더에서 MSSQL 선택 대화상자를 받을 수 없습니다.
- Oracle
오라클
- Cannot get Oracle select dialog from provider.
프로바이더에서 오라클 선택 대화상자를 받을 수 없습니다.
- WMS
WMS
- Cannot get WMS select dialog from provider.
프로바이더에서 WMS 선택 대화상자를 받을 수 없습니다.
- WCS
WCS
- Cannot get WCS select dialog from provider.
프로바이더에서 WCS 선택 대화상자를 받을 수 없습니다.
- WFS
WFS
- Cannot get WFS select dialog from provider.
프로바이더에서 WFS 선택 대화상자를 받을 수 없습니다.
- Default failed to open: %1
다음을 여는 중 기본값 실패: %1
- Default not found: %1
기본값 발견 안됨: %1
- Open Template Project
템플릿 프로젝트 열기
- Auto-open Project
프로젝트 자동 열기
- Failed to open: %1
열기 실패: %1
- Not valid project file: %1
잘못된 프로젝트 파일: %1
- Project failed to open: %1
프로젝트 열기 실패: %1
- Default template has been reopened: %1
기본 템플릿이 다시 열림: %1
- File not found: %1
파일 찾지 못함: %1
- Calculating...
계산중...
- Abort...
중단...
- Choose a QGIS project file to open
불러올 QGIS 프로젝트 파일을 선택
- Loading project: %1
프로젝트 읽는중: %1
- Unable to open project
프로젝트 열 수 없음
- Security warning
보안 경고
- project macros have been disabled.
프로젝트 매크로가 비활성화 됨.
- Enable macros
매크로 활성화
- Project loaded
프로젝트 불러와짐
- Choose a QGIS project file
QGIS 프로젝트 파일을 선택
- Saved project to: %1
다음에 저장된 프로젝트: %1
- Unable to save project %1
프로젝트 %1 저장할 수 없음
- Choose a file name to save the QGIS project file as
새 QGIS 프로젝트로 저장할 파일 이름 선택
- Unable to load %1
%1 불러오지 못함
- Choose a file name to save the map image as
새 지도 이미지로 저장할 파일 이름 선택
- Saved map image to %1
%1에 지도 이미지 저장됨
- Default system font substituted.
기본 시스템 글꼴로 대체되었습니다.
- Labeling
라벨링
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
레이어 <b><u>%1</u></b>의 폰트 발견 못함 (<i>%2</i>). %3
- Open labeling dialog
라벨링 대화상자 열기
@@ -12496,450 +12454,446 @@ Please contact the developers.
일자/시간
- Compiled against GEOS
컴파일시 사용된 GEOS
- Running against GEOS
실행시 사용된 GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
레이어 생성 실패. 자세한 정보는 <a href="#messageLog">message log</a>에서 확인해 주십시오.
- Insufficient permissions
권한이 불충분함
- The project file is not writable.
프로젝트 파일이 쓰기가능하지 않음.
- DXF export completed
DXF 내보내기 완료
- DXF export failed
DXF 내보내기 실패
- Commit errors
커밋 오류
- Could not commit changes to layer %1
레이어 %1에 변경을 커밋할 수 없음
- Errors: %1
오류: %1
- Show more
더 보기
- Labeling Options
라벨링 옵션
- Please select a vector layer first
먼저 벡터 레이어를 선택해 주십시오
- Layer labeling settings
레이어 라벨링 설정
- Reading raster
래스터 읽는 중
- Cannot write raster error code: %1
래스터 쓸 수 없음. 오류 코드: %1
- Saving done
저장 완료
- Export to vector file has been completed
벡터 파일 내보내기 완료되었음
- Save error
저장 오류
- Export to vector file failed.
Error: %1
벡터 파일 내보내기가 실패했습니다.
오류: %1
- No Layer Selected
레이어가 선택되지 않음
- To delete features, you must select a vector layer in the legend
객체를 제거하려면, 범례에서 벡터 레이어를 선택
- No Vector Layer Selected
벡터 레이어가 선택되어 있지 않음
- Deleting features only works on vector layers
객체 삭제는 벡터 레이어에서만 동작함
- Provider does not support deletion
프로바이더가 삭제를 지원하지 않음
- Data provider does not support deleting features
데이터 프로바이더가 객체의 삭제를 지원하지 않음
- Layer not editable
레이어 편집 불가
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
현재 레이어는 편집할 수 없습니다. 디지타이징 도구 모음에서 '편집 시작'을 선택하십시오.
- No Features Selected
객체가 선택되지 않았음
- The current layer has not selected features
현재 레이어에 선택된 객체가 없음
- Delete features
객체 삭제
- Delete %n feature(s)?
number of features to delete
-
- %n 개의 객체를 삭제하시겠습니까?
-
+ %n 개의 객체를 삭제하시겠습니까?
- Features deleted
객체 삭제됨
- Problem deleting features
객체 삭제중 문제발생
- A problem occured during deletion of features
객체를 삭제하는 동안 문제가 발생
- %n feature(s) deleted.
number of features deleted
-
- %n 개의 객체가 삭제됨.
-
+ %n 개의 객체가 삭제됨.
- Merging features...
객체를 결합중...
- Abort
중단
- Create unique print composer title
유일한 인쇄 구성기 제목 생성
- (title generated if left empty)
(비어있을 경우 제목 생성됨)
- Composer title
구성기 제목
- Title can not be empty!
제목이 비어있을 수 없음!
- Title already exists!
제목이 항상 있어야 함!
- Composer %1
구성기 %1
- copy
복사
- No active layer
활성 레이어 없음
- No active layer found. Please select a layer in the layer list
활성 레이어 발견 안됨. 레이어 목록에서 레이어를 선택하십시오
- Active layer is not vector
활성 레이어가 벡터가 아님
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
객체 결합 도구는 벡터 레이어에서만 사용할 수 있습니다. 레이어 목록에서 벡터 레이어를 선택하십시오
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
객체 결합은 편집 모드인 레이어에서만 사용할 수 있습니다. 결합 툴을 이용하기 위해서는 레이어->편집 전환을 선택
- Not enough features selected
충분한 객체가 선택되지 않았음
- The merge tool requires at least two selected features
결합 도구를 이용하기 위해서는 적어도 2 개의 객체를 선택해야 함
- Merged feature attributes
객체 속성 결함됨
- Merge failed
결합 실패함
- An error occured during the merge operation
결합하는 동안 오류 발생
- Union operation canceled
병합 작업 취소됨
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
병합 작업의 결과 지오메트리 유형이 현재 레이어와 맞지 않으므로 작업이 취소되었음
- Merged features
머지된 객체
- No active vector layer
활성 벡터 레이어 없음
- To select features, choose a vector layer in the legend
객체를 선택하기 위해서는, 범례에서 벡터 레이어 선택
- Features cut
객체 잘라내기
- Features pasted
객체 붙여넣기
- Paste features
객체 붙여넣기
- no features could be successfully pasted.
어떤 객체도 성공적으로 붙어넣지 못함.
- %1 features were successfully pasted.
%1 객체가 성공적으로 붙여짐.
- %1 of %2 features could be successfully pasted.
%2 중 %1 객체가 성공적으로 붙여 짐.
- Pasted
붙여넣어짐
- New memory layer name
새로운 메모리 레이어 이름
- Layer name
레이어 이름
- No features in clipboard.
클립보드에 객체 없음.
- No features with geometry found, point type layer will be created.
도형이 없는 객체가 발견되어, 포인트 형식 레이어가 만들어 졌습니다.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
다중 지오메트리 타입이 발견되어, %1과 지오메트리가 다른 객체들은 지오메트리 없이 생성되었습니다.
- Cannot create new layer
새 레이어 만들 수 없음
- Cannot create field %1 (%2,%3)
필드 %1 만들 수 없음 (%2 %3)
- Cannot copy style: %1
다음 스타일 복사 못함: %1
- Cannot parse style: %1:%2:%3
스타일 해석 못함: %1:%2:%3
- Cannot read style: %1
스타일 읽지 못함: %1
- Start editing failed
편집 시작 실패
- Provider cannot be opened for editing
지정된 프로바이더는 편집모드로 열 수 없음
- Stop editing
편집 종료
- Do you want to save the changes to layer %1?
레이어 %1의 변경사항을 저장하시겠습니까?
- Problems during roll back
롤백 중에 문제가 발생
- Could not %1 changes to layer %2
Errors: %3
@@ -12950,342 +12904,340 @@ Errors: %3
- rollback
롤백
- cancel
취소
- Save
저장
- all
모두
- Rollback
롤백
- Cancel
취소
- Current edits
현재 편집내용
- %1 current changes for %2 layer(s)?
%2 레이어에 대해 변경사항을 %1 하시겠습니까?
- copy
복사
- Plugin layer
플러그인 레이어
- Memory layer
메모리 레이어
- Duplicate layer:
중복 레이어:
- %1 (duplication resulted in invalid layer)
%1 (잘못된 레이어에서의 중복된 결과)
- Set scale visibility for selected layers
선택된 레이어에 대한 가시 스케일 설정
- Couldn't load Python support library: %1
파이썬 지원 라이브러리를 불러올 수 없음: %1
- Couldn't resolve python support library's instance() symbol.
파이썬 지원 라이브러리의 instance() 심볼을 해석할 수 없습니다.
- Python support ENABLED :-)
파이썬 지원이 가능해짐 ^^
- There is a new version of QGIS available
새로운 버전의 QGIS가 존재함
- You are running a development version of QGIS
개발 버전 QGIS를 사용중임
- You are running the current version of QGIS
최신 버전의 QGIS 사용중임
- Would you like more information?
더 많은 정보를 원하십니까?
- QGIS Version Information
QGIS 버전 정보
- QGIS - Changes since last release
QGIS - 마지막 릴리즈 후의 변경사항
- Unable to get current version information from server
서버에서 현재 버전 정보를 가져올 수 없음
- Connection refused - server may be down
연결 거부 - 서버가 다운된 듯 함
- QGIS server was not found
QGIS 서버를 찾을 수 없음
- Unknown network socket error: %1
알 수 없는 네트워크 소켓 오류: %1
- Unable to communicate with QGIS Version server
%1
QGIS 버전 서버와 통신할 수 없음
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
히스토그램 스트레치를 하시려면, 래스터 레이어를 선택해야합니다.
- To change brightness or contrast, you need to have a raster layer selected.
밝기나 대조를 변경하시려면 래스터 레이어를 선택하셔야 합니다.
- en
documentation language
ko-KR
- Layer is not valid
레이어가 잘못되었음
- The layer %1 is not a valid layer and can not be added to the map
레이어 %1은 올바른 레이어가 아니기 때문에 지도에 추가할 수 없음
- The layer is not a valid layer and can not be added to the map
이 레이어가 잘못되어 지도에 추가할 수 없음
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
프로젝트에 저장되지 않은 변경사항이 있는 편집모드 레이어가 있으며, 이는 저장되지 않습니다!
- Save?
저장하시겠습니까?
- Current CRS: %1 (OTFR enabled)
현재 좌표계: %1 (OTFR 활성화)
- Current CRS: %1 (OTFR disabled)
현재 좌표계: %1 (OTFR 비활성화)
- Map coordinates for the current view extents
현재 뷰 영역의 지도 좌표
- Map coordinates at mouse cursor position
마우스 커서 위치의 지도 좌표
- Extents:
범위:
- Maptips require an active layer
지도팁은 활성 레이어가 필요함
- %n feature(s) selected on layer %1.
number of selected features
-
- %n개의 객체가 레이어 %1에서 선택되어 있습니다.
-
+ %n개의 객체가 레이어 %1에서 선택되어 있습니다.
- Open a GDAL Supported Raster Data Source
GDAL이 지원하는 래스터 데이터 소스 열기
- Error adding valid layer to map canvas
유효한 레이어를 지도 캔버스에 추가 실패
- Raster layer
래스터 레이어
- %1 is not a supported raster data source
%1은 지원되는 래스터 데이터 소스가 아님
- Unsupported Data Source
지원되지 않은 데이터 소스
- Exit QGIS
QGIS 종료
- Do you really want to quit QGIS?
정말로 QGIS를 종료하시겠습니까?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
이 프로젝크 파일은 구버전의 QGIS에서 저당되었음. 이 프로젝트 파일을 저장할 때, QGIS가 최신 버전으로 업데이트 할 것이며, 구버전 QGIS에서 사용할 수 없게 됩니다.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>이 프로젝트 파일은 다른 이전 버전 QGIS에서 저장되었고 이 프로젝트가 저장될 때 QGIS 프로젝트 파일을 최신 버전으로 저장됩니다. 이 경우 이전 버전의 QGIS에서 사용할 수 없는 표현이 갱신됩니다.<p>QGIS 개발자는 하위 호환성을 유지하려고 노력하지만 이전 프로젝트의 일부 정보가 손실될 것입니다. QGIS의 품질을 향상시키기 위해 %3에 버그 보고서를 해 주실 수 있으면 감사하겠습니다. 이 경우 이전 프로젝트 파일과 오류를 발견한 QGIS 버전을 포함하는 것을 잊지 마십시오.<p>이전 프로젝트 파일을 열 때마다이 경고가 표시되는 것을 중지 하기 위해서는 %4 메뉴의 '%5' 체크를 취소하십시오.<p>프로젝트 파일 버전: %1<br>QGIS 버전: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>설정:옵션:일반</tt>
- Warn me when opening a project file saved with an older version of QGIS
열 프로젝트 파일이 구 버전의 QGIS에서 만든 것일 때 경고
- Project file is older
프로젝트 파일이 구버전임
- This project file was saved by an older version of QGIS
이 프로젝트 파일은 구버전의 QGIS에서 저장되었음
- Please check the <a href="#messageLog">message log</a> for further info.
자세한 정보는 <a href="#messageLog">message log</a>를 확인해 주십시오.
- A network request timed out, any data received is likely incomplete.
네트워크 요청이 시간초과 됨. 일부 데이터가 불완전하게 받아진 듯 함.
- Warning
경고
- This layer doesn't have a properties dialog.
이 레이어는 속성 대화상자를 지원하지 않습니다.
- Authentication required
인증이 필요함
- Proxy authentication required
프록시 인증이 필요함
- SSL errors occured accessing URL %1:
URL %1에 액세스하는 동안 SSL 오류 발생:
-
Always ignore these errors?
@@ -13294,12 +13246,10 @@ Always ignore these errors?
항상 이런 오류를 무시하시겠습니까?
- %n SSL errors occured
number of errors
-
- %n개의 SSL 오류가 발생됨
-
+ %n개의 SSL 오류가 발생됨
@@ -13331,7 +13281,7 @@ Always ignore these errors?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13681,19 +13631,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
예외
- unknown exception
알 수 없는 예외
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13718,7 +13668,7 @@ SVG 검색 경로: %8
-
match indentation of application state
@@ -13726,24 +13676,24 @@ SVG 검색 경로: %8
- [ERROR] Can not make qgis.db private copy
[오류] qgis.db의 사용자 복사본 만들지 못함
- Could not open qgis.db
qgis.db를 열 수 없음
- Migration of private qgis.db failed.
%1
사용자 qgis.db 마이그레이션이 실패했습니다.
%1
- Update of view in private qgis.db failed.
%1
사용자 qgis.db의 뷰 갱신 실패.
@@ -13753,28 +13703,28 @@ SVG 검색 경로: %8
QgsAtlasComposition
- Atlas filter eval error: %1
아틀라스 필터 해석 오류: %1
- Composer
구성기
- No matching atlas features
일치하는 아틀라스 객체 없음
- Atlas feature %1 of %2
아틀라스 객체 %2 중 %1
- Atlas filename evaluation error: %1
아틀라스 파일이름 해석 오류: %1
@@ -13790,7 +13740,7 @@ SVG 검색 경로: %8
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
파일이름 패턴을 '%1'으로 설정할 수 없음.
@@ -14485,9 +14435,7 @@ Parser error:
Attribute table - %1 (%n Feature(s))
feature count
-
- 속성 테이블 - %1 (%n 객체)
-
+ 속성 테이블 - %1 (%n 객체)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- 정말 %n 개의 북마크를 삭제하시겠습니까?
-
+ 정말 %n 개의 북마크를 삭제하시겠습니까?
QgsCategorizedSymbolRendererV2Model
- Symbol
심볼
- Value
값
- Label
라벨
@@ -15269,49 +15215,49 @@ Database:%2
고급
- Random colors
무작위 색상
- Symbol levels...
심볼 레벨...
- High number of classes!
클레스의 높은 값!
- Classification would yield %1 entries which might not be expected. Continue?
분류가 기대하지 않은 %1 객체를 얻을 듯 합니다. 계속하시겠습니까?
- Error
오류
- There are no available color ramps. You can add them in Style Manager.
사용할 수 있는 색상표가 없습니다. 스타일 관리자에서 추가할 수 있습니다.
- The selected color ramp is not available.
선택된 색상표를 사용할 수 없습니다.
- Confirm Delete
삭제 확인
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
분류 필드가 '%1'에서 '%2'로 변경되었습니다.
이전 클레스를 분류 작업 전에 삭제하시겠습니까?
@@ -15369,25 +15315,20 @@ Should the existing classes be deleted before classification?
QgsColorButton
- Select Color
색상 선택
- Copy color
색상 복사
- Paste color
색상 붙여넣기
-
- Pick color
-
QgsColorDialog
@@ -15459,7 +15400,7 @@ Should the existing classes be deleted before classification?
Composer
구성기
@@ -15618,8 +15559,8 @@ Should the existing classes be deleted before classification?
Set as atlas feature for %1
%1을 위해 아틀라스 피처로 지정
@@ -15656,7 +15597,7 @@ Should the existing classes be deleted before classification?
Choose a file name to save the map as
지도를 저장할 파일 이름을 선택하십시오
@@ -15667,15 +15608,15 @@ Should the existing classes be deleted before classification?
Empty filename pattern
파일이름 비어 있음
The filename pattern is empty. A default one will be used.
파일이름이 비어있습니다.기본값이 사용됩니다.
@@ -15686,15 +15627,15 @@ Should the existing classes be deleted before classification?
Unable to write into the directory
디렉토리내에 쓸 수 없습니다
The given output directory is not writable. Cancelling.
해당 출력 디렉토리에 쓸 수 없습니다. 취소합니다.
@@ -15704,251 +15645,251 @@ Should the existing classes be deleted before classification?
Atlas processing error
아틀라스 프로세싱 오류
Feature filter parser error: %1
객체 필터 해석기 오류: %1
Error creating %1.
%1 생성중 오류.
Rendering maps...
도면 표현하기...
Abort
취소
- Big image
큰 이미지
- To create image %1x%2 requires about %3 MB of memory. Proceed?
%1x%2 이미지를 만들기 위해서는 약 %3 MB의 메모리가 필요합니다. 실행하시겠습니까?
- Choose a file name to save the map image as
지도 이미지를 저장할 파일 이름을 선택하십시오
- Memory Allocation Error
메모리 할당 오류
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
이미지 #%1 ( %2x%3 @ %4dpi )을 생성하는 중 메모리 오버플로우가 발생했습니다.
해상도를 낮추거나 더 작은 출력크기로 시도해 주세요
- Image export error
이미지 내보내기 오류
- Directory where to save image files
이미지파일을 저장할 디렉토리
- Image format:
이미지 양식:
- SVG warning
SVG 경고
- Don't show this message again
이 메시지를 다시 보여주지 않음
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>QGIS의 SVG 내보내기 기능은 버그와 결함때문에 몇가지 문제가 있습니다
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4 svg 코드에 있어 조금 문제가 있습니다. 특히 레이어가 지도 도곽에서 잘리지 않는 문제가 있습니다.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
만약 Qgis에서 벡터기반 출력 파일이 필요하다면 PostScript로 출력할 것을 권장합니다. SVG로 출력은 심뢰도가 낮습니다.</p>
- SVG Format
SVG 포멧
- Directory where to save SVG files
SVG 파일을 저장할 디렉토리
- SVG export error
SVG 내보내기 오류
- on page
발생 패이지
- SVG error
SVG 오류
- There was an error in SVG output for SVG layer
SVG 레이어를 위한 SVG 출력에 오류가 있음
- copy
복사
- Duplicating composer...
구성기 복사하기...
- Duplicate Composer
구성기 복사
- Composer duplication failed.
구성기 복사 실패.
- Save template
템플릿 저장
- Composer templates
구성기 템플릿
- Save error
저장 오류
- Error, could not save file
오류, 파일을 저장할 수 없습니다
- Load template
템플릿 불러오기
- Read error
읽기 오류
- Error, could not read file
오류, 파일을 읽을 수 없습니다
- Composer error
구성기 오류
- Error, could not create new composer
오류, 새로운 구성기를 생성할 수 없습니다
- Loading template into composer...
구성기에 템플릿 불러오기...
- Project contains WMS layers
프로젝트에 WMS 레이어가 포함되어 있습니다
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
어떤 WMS 서버(예: UMN mapserver)는 WIDTH와 HEIGHT 매개 변수에 제한이 있습니다. 이러한 서버 레이어를 인쇄하는 경우 제한을 초과할 수 있습니다. 이 경우 WMS 레이어는 인쇄되지 않습니다
- Project contains composition effects
프로젝트에 구성 효과가 포함되어 있습니다
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
강화된 구성 효과는 이 프로젝트내에서 블렌드 모드나 벡터 레이어 투명도 기능을 지원합니다, 벡터로 출력할 수 없을 경우. 래스터로 출력하도록 추천합니다.
- Print as raster
래스터로 인쇄
- Landscape
가로
@@ -17093,67 +17034,67 @@ Please try a lower resolution or a smaller papersize
QgsComposerItemWidget
- Frame color changed
프레임 색상이 변경되었음
- Background color changed
배경색이 변경되었음
- Item position changed
항목 위치가 변경되었음
- Item outline width
항목 외곽선 두께
- Item frame join style
항목 테두리 연결 스타일
- Item frame toggled
항목 프레임 전환
- Item background toggled
항목 배경색 전환됨
- Select background color
배경색 선택
- Select frame color
프레임 색상 선택
- Item blend mode changed
항목 플렌드 모드 변경됨
- Item transparency changed
항목 투명도 변경됨
- Item id changed
항목 ID 변경됨
- Item rotation changed
항목 회전 변경됨
@@ -17166,115 +17107,104 @@ Please try a lower resolution or a smaller papersize
전역 옵션
- Position and size
위치와 크기
- Reference point
참조 포인트
- X
X
- Y
Y
- Width
폭
- Height
높이
- Page
페이지
- ...
- ...
-
-
- Rotation
회전
- °
°
- Frame
프레임
- mm
mm
- Join style
이음새 스타일
- Rendering
렌더링
- Blending mode
블렌딩 모드
- Thickness
굵기
- Color...
색상...
- Background
배경
- Transparency
투명도
- Item ID
항목 ID
- Id
Id
@@ -17307,18 +17237,18 @@ Please try a lower resolution or a smaller papersize
라벨 색상 변경됨
- Insert expression
표현식 삽입
- Label alignment changed
라벨의 정렬이 변경됨
@@ -17424,8 +17354,9 @@ Please try a lower resolution or a smaller papersize
QgsComposerLegend
+ Legend
- 범례
+ 범례
@@ -17590,12 +17521,12 @@ Please try a lower resolution or a smaller papersize
범례 그룹이 추가됨
- Map %1
지도 %1
- None
없음
@@ -18025,107 +17956,100 @@ Please try a lower resolution or a smaller papersize
QgsComposerMap
- Map %1
지도 %1
- Map will be printed here
여기에 지도 인쇄 예정
-
- Grid %1
-
QgsComposerMapWidget
- Cache
캐시
- Render
표현하기
- Rectangle
사각형
- Solid
솔리드
- Cross
크로스
- Markers
-
-
- Decimal
10진
- DegreeMinute
도분
- DegreeMinuteSecond
도분초
+ No frame
- 프레임 없음
+ 프레임 없음
- Zebra
제브라
- Map scale changed
지도 스케일이 변경됨
- Map rotation changed
지도 회전이 변경됨
- Map extent changed
지도 영역이 변경됨
- Select font color
글꼴 색상 선택
@@ -18141,235 +18065,164 @@ Please try a lower resolution or a smaller papersize
격자 테두리 채움 색상 선택
- Canvas items toggled
캔버스 항목이 전환됨
- None
없음
- Overview frame style changed
오버뷰 프레임 스타일 변경됨
- Overview centering mode changed
미리보기 중심 모드 변경됨
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- 지도 단위
-
-
- Millimeter
- 밀리미터
-
-
- Centimeter
-
-
- change...
- 변경...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
격자 체크박스가 전환됨
- Grid interval changed
격자 간격이 변경됨
- Grid offset changed
격자 오프셋이 변경됨
- Grid line style changed
그리드 선 스타일 변경됨
- Grid type changed
격자 유형이 변경됨
+ Grid cross width changed
- 격자의 십자선 두께가 변경됨
+ 격자의 십자선 두께가 변경됨
- Annotation font changed
주석 글꼴이 변경됨
+ Label font changed
- 라벨 글꼴이 변경됨
+ 라벨 글꼴이 변경됨
- Annotation distance changed
주석 거리가 변경됨
- Annotation format changed
주석 양식이 변경됨
- Annotation toggled
주석 전환됨
- Changed annotation precision
주석 정밀도가 변경됨
- Changed grid frame style
격자 프레임 스타일이 변경됨
+ Changed grid frame width
- 격자 프레임 폭이 변경됨
+ 격자 프레임 폭이 변경됨
- Changed grid frame line thickness
변경된 격자 테두리 선 두께
- Grid frame color changed
격자 테두리 색상 변경됨
- Grid frame first fill color changed
격자 테두리 처음 채움 색 변경됨
- Grid frame second fill color changed
격자 테두리 두번째 채움 색 변경됨
- Inside frame
내부 프레임
- Outside frame
외부 프레임
- Disabled
사용금지
- Horizontal
가로
- Vertical
세로
- Annotation position changed
주석 위치가 변경됨
- Changed annotation direction
주석 방향이 변경됨
- Map %1
지도 %1
@@ -18382,377 +18235,287 @@ Please try a lower resolution or a smaller papersize
지도 옵션
- Map
지도
- Main properties
주요 속성들
- Update preview
미리보기 갱신
- Scale
축척
- Map rotation
지도 회전
- Draw map canvas items
지도 캔버스 항목 그리기
- Lock layers for map item
지도 항목 레이어 고정
- Extents
영역
- X max
X 최대값
- Y min
Y 최소값
- Y max
Y 최대값
- Set to map canvas extent
지도 캔버스 영역 지정
- X min
X 최소값
- View extent in map canvas
지도 캔버스의 영역 보기
- Controlled by atlas
아틀라스에 의해 조정됨
- Margin around feature
객체 주변 여백
- %
%
- Fixed scale
고정 축척
- Use one of the predefined scales of the project where the atlas feature best fits.
프로젝트의 미리 정의된 스캐일 중 아틀라스 객체에 가장 잘 맞는 하나를 사용하십시오.
- Predefined scale (best fit)
미리 정의된 스케일 (최적 맞춤)
+ Show grid
- 격자 보기
+ 격자 보기
+ Grid &type
- 격자 유형(&t)
+ 격자 유형(&t)
- Offset
오프셋
- mm
mm
- Blend mode
블렌드 모드
- Interval
간격
- Grid frame
격자 테두리
- Frame size
테두리 크기
- Frame line thickness
테두리 선 두께
- Color...
색상...
- Frame fill colors
테두리 채움 색상
- Marker style
- 마커 스타일
-
-
- Overview blending mode
블렌딩 모드로 오버뷰
- Invert overview
반전 오버뷰
- Center on overview
오버뷰상의 중앙
- X
X
- °
°
- Y
Y
- Cross width
십자선 두께
- Frame style
프레임 스타일
- Line style
라인 스타일
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- 격자 유형
-
-
- CRS
-
-
- change...
변경...
- Interval units
-
-
- Map unit
- 지도 단위
-
-
- Millimeter
- 밀리미터
-
-
- Centimeter
-
-
- No frame
- 프레임 없음
-
-
- Zebra
- 제브라
-
-
- Draw coordinates
좌표값 그리기
- Format
양식
- Left
왼쪽
- Right
오른쪽
- Top
상단
- Bottom
하단
- Font
글꼴
- Font...
글꼴...
- Font color
- 글꼴 색상
-
-
- Distance to map frame
지도 프레임까지의 거리
- Coordinate precision
좌표 정밀도
- Font color...
글꼴 색상...
- Overview
오버뷰
- Overview frame
오버뷰 프레임
- Overview style
오버뷰 스타일
- Change...
변경...
@@ -18793,18 +18556,18 @@ Please try a lower resolution or a smaller papersize
QgsComposerPicture
- Picture expression parsing error: %1
픽처 계산식 파싱 오류: %1
- Composer
구성기
- Picture expression eval error: %1
픽처 계산식 계산 오류: %1
@@ -18819,64 +18582,64 @@ Please try a lower resolution or a smaller papersize
Picture changed
픽처가 변경되었습니다
- Expression based image path
식 기반 이미지 경로
- Picture rotation changed
픽처 회전이 변경됨
- Select new preview directory
새 미리보기 디렉토리 선택
- Picture resize mode changed
픽처 크기변경 모드 변경됨
- Picture placement changed
픽처 위치 변경됨
- Picture source changed
픽처 소스 변경됨
- Picture source expression
픽처 소스 계산식
- Rotation synchronisation toggled
회전 동기화가 전환됨
- Rotation map changed
지도 회전이 변경됨
- Map %1
지도 %1
- Creating icon for file %1
파일 %1 아이콘 작성 중
@@ -19043,32 +18806,32 @@ Please try a lower resolution or a smaller papersize
QgsComposerScaleBar
- units
단위
- km
km
- m
m
- miles
마일
- ft
피트
- Nm
Nm
@@ -19077,38 +18840,38 @@ Please try a lower resolution or a smaller papersize
QgsComposerScaleBarWidget
Single Box
단일 박스
Double Box
더블 박스
Line Ticks Middle
선 눈금 중앙으로
Line Ticks Down
선 눈금 아래로
Line Ticks Up
선 눈금 위로
Numeric
숫자
@@ -19148,144 +18911,119 @@ Please try a lower resolution or a smaller papersize
해리
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- 글꼴 색상 선택
-
-
- Select stroke color
-
-
- Map %1
지도 %1
- Scalebar map changed
스케일바 지도가 변경됨
- Scalebar line width
스케일바 선 폭
- Scalebar segment size
스케일바 세그먼트 크기
- Scalebar segments left
스케일바 세그먼트의 왼쪽
- Number of scalebar segments changed
스케일바 세그먼트수가 변경됨
- Scalebar height changed
스케일바 높이가 변경됨
- Scalebar font changed
스케일바 글꼴이 변경됨
- Scalebar font color changed
스케일바 글꼴 색상이 변경됨
- Scalebar color changed
스케일바의 색상이 변경됨
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
스케일바 선 색상이 변경됨
- Scalebar unit text
스케일바 단위 문자
- Scalebar map units per segment
세그먼트 당 스케일바 지도 단위
- Scalebar style changed
스케일바 스타일이 변경됨
- Scalebar label bar space
스케일바 라벨 모음 영역
- Scalebar box content space
스케일바 상자 컨텍스트 영역
- Scalebar alignment
스케일바 정렬
- Scalebar changed to map units
스케일바가 지도 단위로 변경됨
- Scalebar changed to feet
스케일바가 피트로 변경됨
- Scalebar changed to nautical miles
스케일바가 해리 단위로 변경됨
- Scalebar changed to meters
스케일바가 미터로 변경됨
- Scalebar line join style
스케일바 선 연결 스타일
- Scalebar line cap style
스케일바 선 끝 스타일
@@ -19428,11 +19166,6 @@ Please try a lower resolution or a smaller papersize
Secondary fill color...
-
-
- Stroke color...
선 색상...
@@ -19442,37 +19175,37 @@ Please try a lower resolution or a smaller papersize
Ellipse
타원
Rectangle
사각형
Triangle
삼각형
- Shape style changed
도형 스타일 변경됨
- Shape radius changed
도형 반경 변경됨
- Shape type changed
도형 유형이 변경되었습니다
@@ -19883,107 +19616,107 @@ Please try a lower resolution or a smaller papersize
QgsComposition
- Label added
라벨이 추가됨
- Map added
지도가 추가됨
- Arrow added
화살표가 추가됨
- Scale bar added
스케일바가 추가됨
- Shape added
도형이 추가됨
- Picture added
픽처가 추가됨
- Legend added
범례가 추가됨
- Table added
테이블이 추가됨
- Aligned items left
항목 왼쪽 정렬됨
- Aligned items horizontal center
항목 수평 중앙 정렬됨
- Aligned items vertical center
항목 수직 중앙 정렬됨
- Aligned items right
항목 오른쪽 정렬됨
- Aligned items top
항목 상단 정렬됨
- Aligned items bottom
항목 하단 정렬됨
- Items locked
항목 잠김
- Items unlocked
항목 잠김해제됨
- Item z-order changed
항목의 Z 순서를 변경됨
- Remove item group
아이템 그룹 제거
- Frame deleted
프레임이 삭제됨
- Item deleted
아이템이 삭제됨
- Multiframe removed
멀티프레임이 삭제됨
@@ -20040,148 +19773,148 @@ Please try a lower resolution or a smaller papersize
Landscape
가로
Portrait
세로
Map %1
지도 %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
사용자 정의
@@ -20199,131 +19932,109 @@ Please try a lower resolution or a smaller papersize
종이와 품질
- Presets
사전 설정
- ...
- ...
-
-
- Width
폭
- Height
높이
- Units
단위
- Number of pages
페이지 번호
- Orientation
방향
- Export resolution
내보내기 해상도
- Print as raster
래스터로 인쇄
-
- Snap tolerance
- 맞추기 허용치
-
-
- px
- px
-
Change...
변경...
- Page background
페이지 배경
+ Grid
- 격자
+ 격자
- dpi
dpi
- World file on
월드 파일 기반
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
격자 간격
- x:
x:
- y:
y:
+ Spacing
- 간격
+ 간격
+ Snap to alignments
- 정렬에 맞추기
+ 정렬에 맞추기
+ Tolerance
- 허용 범위
+ 허용 범위
@@ -21497,7 +21208,7 @@ and current file is [%3]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23236,7 +22947,7 @@ Leave empty to automatically apply the maximum value.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
미리보기 컬럼으로 '%1' 컬럼을 설정할수 없음.
@@ -23565,7 +23276,7 @@ Parser error:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23578,7 +23289,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24681,7 +24392,7 @@ MyForms.py 은 PYTHONPATH 에 등록되어 있어야 한다, .qgis/python, 또
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -25999,7 +25710,7 @@ Please reselect a valid file.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26951,17 +26662,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
기호
- Value
값
- Label
라벨
@@ -27054,41 +26765,41 @@ p, li { white-space: pre-wrap; }
고급
- Symbol levels...
심볼 레벨...
- Error
오류
- There are no available color ramps. You can add them in Style Manager.
사용할 수 있는 색상표가 없습니다. 스타일 관리자에서 추가할 수 있습니다.
- The selected color ramp is not available.
선택된 색상표를 사용할 수 없습니다.
- Warning
경고
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
내츄럴 브레이크 분류(Jenks)는 O(n2) 복잡도를 가짐, 분류작업에 오랜 시간이 걸릴 것입니다.
계산을 중단하려면 Cancel을 누르고 계속하려면 OK를 누르세요.
- Renderer creation has failed.
렌더러 생성이 실패했습니다.
@@ -27272,9 +26983,7 @@ Press cancel to abort breaks calculation or OK to continue.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- 정말 선택된 레이어 %n 개를 삭제하시겠습니까?
-
+ 정말 선택된 레이어 %n 개를 삭제하시겠습니까?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29030,7 +28739,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29069,7 +28778,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29143,7 +28852,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29910,9 +29619,7 @@ at line %2 column %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- %n 개의 처리되지 않은 레이어가 있습니다, 이들은 지금 닫으면 손실됩니다.
-
+ %n 개의 처리되지 않은 레이어가 있습니다, 이들은 지금 닫으면 손실됩니다.
@@ -30042,10 +29749,8 @@ at line %2 column %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- 네트워크가 %n 초간 응답하지 않았습니다.
-네트워크 연결 문제 또는 WMS 서버 문제인 듯 합니다.
-
+ 네트워크가 %n 초간 응답하지 않았습니다.
+네트워크 연결 문제 또는 WMS 서버 문제인 듯 합니다.
@@ -31240,7 +30945,7 @@ This may be a problem in your network connection or at the WMS server.
레이어 라벨 설정
- Label this layer with
이 레이어의 라벨
@@ -31320,22 +31025,22 @@ This may be a problem in your network connection or at the WMS server.
...
...
@@ -31391,7 +31096,7 @@ This may be a problem in your network connection or at the WMS server.
다중 행
- Automated placement settings (apply to all layers)
자동 배치 설정 (모든 레이어에 적용)
@@ -31421,7 +31126,7 @@ This may be a problem in your network connection or at the WMS server.
Rendering
렌더링
@@ -31509,7 +31214,7 @@ This may be a problem in your network connection or at the WMS server.
Alignment
정렬
@@ -31546,7 +31251,7 @@ This may be a problem in your network connection or at the WMS server.
반복
- Discourage labels from covering features
객체에 덥히는 라벨 억제
@@ -31641,82 +31346,82 @@ This may be a problem in your network connection or at the WMS server.
버퍼
- Labels will not show if larger than this on screen
라벨이 이것보다 큰 경우 화면에 표시되지 않음
- px
px
- Data defined
데이터에 의해 정의
- X
X
- Y
Y
- Coordinate
좌표
- Preserve data rotation values
데이터 회전 값을 유지
- horizontal
수평
- vertical
수직
- Label options
라벨 옵션
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
값이 < 0 이면 스케일이 1:1보다 가까움을 나타냅니다. 예: -10 = 10:1<br>0 값이면 해당 제한을 비활성화 합니다.
- Maximum
최대
- Pixel size-based visibility (labels in map units)
픽셀 크기 기반의 보이기 (지도 단위의 라벨)
- Labels will not show if smaller than this on screen
라벨이 이것보다 작은 경우 화면에 표시되지 않음
- Minimum
최소
@@ -31726,7 +31431,7 @@ This may be a problem in your network connection or at the WMS server.
<
- Scale-based visibility
스케일에 따른 가시성
@@ -31764,17 +31469,17 @@ This may be a problem in your network connection or at the WMS server.
역방향
- Priority
우선 순위
- Low
낮음
- High
높음
@@ -31927,7 +31632,7 @@ This may be a problem in your network connection or at the WMS server.
Rotation
회전
@@ -31979,17 +31684,17 @@ This may be a problem in your network connection or at the WMS server.
거리
- outside
외부
- inside
내부
- Maximum angle between curved characters
곡선상 문자 사이의 최대 각도
@@ -32095,62 +31800,62 @@ This may be a problem in your network connection or at the WMS server.
심볼 단위
- Merge connected lines to avoid duplicate labels
라벨 중복을 제거하기 위해 인접한 선을 결합
- Label every part of multi-part features
멀티파트 객체 각 파트에 라벨을 출력
- Feature options
객체 옵션
- Suppress labeling of features smaller than
객체가 더 작은 경우 라벨링 안하기
- mm
mm
- Show all labels for this layer (including colliding labels)
이 레이어의 모든 라벨 표시 (겹치는 라벨 포함)
- Show upside-down labels
라벨을 뒤집어 표시
- never
안함
- when rotation defined
회전이 설정된 때
- always
항상
- Limit number of features to be labeled to
라벨에 사용되는 객체 수를 제한
- Number of features sent to labeling engine, though not all may be labeled
라벨링 엔진에 전송되는 객체 수, 모두 표시되지 않을 수 있음
@@ -32160,17 +31865,17 @@ This may be a problem in your network connection or at the WMS server.
위치
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
라벨링 엔진에 의해 회전해 표시 하려면 선택 취소
- Always show
항상 보이기
- Show label
라벨 보이기
@@ -32186,12 +31891,12 @@ This may be a problem in your network connection or at the WMS server.
QgsLayerTreeModel
- Double-click to view legend
범례를 보려면 더블클릭
- following %1 items
not displayed
다음의 %1 항목은
@@ -32249,12 +31954,12 @@ not displayed
QgsLegendModel
- Group
그룹화
- No Legend Available
범례가 없음
@@ -32482,18 +32187,18 @@ not displayed
QgsMapCanvas
- canvas
캔버스
- Rendering
렌더링
- Canvas refresh: %1 ms
캔버스 새로고침: %1 ms
@@ -33678,9 +33383,7 @@ not displayed
%n more
unread messages
-
- %n 더 있음
-
+ %n 더 있음
@@ -33818,14 +33521,14 @@ not displayed
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
연결 실패 - 호스트 이름이 지정되지 않았습니다.
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
연결 실패 - 데이터베이스 이름이 지정되지 않았습니다.
@@ -35371,9 +35074,7 @@ Extended error information:
Coordinate Reference System (%n available)
crs count
-
- 좌표계 (%n 사용가능)
-
+ 좌표계 (%n 사용가능)
Solid
채움
Dots
점
Crosses
십자
- Detected active locale on your system: %1
사용중인 시스템에서 탐지된 언어설정: %1
- To vertex
버텍스에 맞춤
- To segment
세그먼트에 맞춤
- To vertex and segment
버텍스와 세그먼트에 맞춤
- map units
지도 단위
- pixels
픽셀
- Semi transparent circle
반투명 원
- Cross
교차
- None
없음
- QGIS files
QGIS 파일
- Off
꺼짐
- QGIS
QGIS
- GEOS
GEOS
- Round
둥글게
- Mitre
마이터
- Bevel
비스듬하게
- Save default project
기본 프로젝트 저장
- You must set a default project
기본 프로젝트를 설정해야함
- Current project saved as default
기본 프로젝트로 저장된 현재 프로젝트
- Error saving current project as default
기본 프로젝트로 저장된 현재 프로젝트 저장 오류
- Choose a directory to store project template files
프로젝트 템플릿 파일을 저장할 디렉토리를 선택
@@ -36502,105 +36203,105 @@ Always network: always load from network and do not check if the cache has a val
지도에 보이는 객체 표시
- Choose project file to open at launch
시작시 열 프로젝트 파일 선택
- Create Options - %1 Driver
생성 옵션 - %1 드라이버
- Create Options - pyramids
생성 옵션 - 피라미드
- Restore UI defaults
UI 기본값 복구
- Are you sure to reset the UI to default (needs restart)?
정말로 UI 기본값으로 재설정(재시작 필요함) 하시겠습니까?
- Overwrite
덮어쓰기
- If Undefined
정의되지 않은 경우
- Unset
설정 안함
- Prepend
앞에 붙이기
- Append
붙이기
- Choose a directory
디렉토리를 선택
- Enter scale
스케일 입력
- Scale denominator
스케일 눈금
- Load scales
스케일 불러오기
- XML files (*.xml *.XML)
XML 파일 (*.xml * XML)
- Save scales
스케일 저장
- No Stretch
스트레치 없음
- Stretch To MinMax
최소/최대값까지 스트레치
- Stretch And Clip To MinMax
최소/최대값까지 스트레치하고 자름
- Clip To MinMax
최소/최대값으로 자름
@@ -36620,7 +36321,7 @@ Always network: always load from network and do not check if the cache has a val
General
일반 정보
@@ -36803,7 +36504,7 @@ Always network: always load from network and do not check if the cache has a val
...
...
@@ -36919,7 +36620,7 @@ Always network: always load from network and do not check if the cache has a val
Remove
삭제
@@ -36927,7 +36628,7 @@ Always network: always load from network and do not check if the cache has a val
Add
추가
@@ -37187,22 +36888,7 @@ Always network: always load from network and do not check if the cache has a val
밀리미터 단위으 라인 / 외곽선 두께
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
객체 생성 후 속성 양식 팝업 억제
@@ -37499,18 +37185,22 @@ Always network: always load from network and do not check if the cache has a val
색상...
+ Grid defaults
- 격자 기본값
+ 격자 기본값
+ Spacing
- 여백
+ 여백
mm
mm
@@ -37531,370 +37221,372 @@ Always network: always load from network and do not check if the cache has a val
Snap tolerance
맞추기 허용치
+ Guide defaults
- 격자 기본값
+ 격자 기본값
- Feature creation
객체 만들기
- Validate geometries
지오메트리 검증
- Reuse last entered attribute values
마지막 입력 값 다시 사용
- Rubberband
고무 밴드
- Line color
선색
- Line width in pixels
픽셀 단위의 선폭
- Line width
선폭
- Snapping
맞추기
- Default snap mode
기본 맞추기 모드
- Default snapping tolerance
기본 맞추기 허용치
- Search radius for vertex edits
버텍스 편집을 위한 검색 반경
- map units
지도 단위
pixels
픽셀
- Open snapping options in a dock window (QGIS restart required)
도킹 윈도우에 맞추기 옵션 열기 (QGIS 재시작 필요)
- Vertex markers
버텍스 마커
- Marker style
마커 스타일
- Marker size
마커 크기
- Show markers only for selected features
선택된 객체에만 마커를 표시
- Curve offset tool
곡선 상쇄 도구
- Miter limit
마이터 제한
- Join style
이음새 스타일
- Quadrant segments
사분면 세그먼트
- GDAL driver options
GDAL 드라이버 옵션
- Edit Pyramids Options
피라미드 옵션 편집
- Edit Create Options
생성 옵션 편집
- GDAL drivers
GDAL 드라이버
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
어떤 경우에는 하나 이상의 GDAL 드라이버가 동일한 래스터 형식을 불러오는 데 사용될 수 있습니다. 사용할 지정하려면 아래 목록을 사용하십시오.
- Name
이름
- ext
ext
- Flags
플래그
- Description
설명
- CRS for new layers
새 레이어를 위한 좌표계
- Select...
선택...
- Use &project CRS
프로젝트의 좌표계를 사용(&p)
- Prompt for &CRS
좌표계 확인(&C)
- Use default CRS displa&yed below
아래의 기본 좌표계를 사용(&y)
- When a new layer is created, or when a layer is loaded that has no CRS
새 레이어를 만들 때, 또는 좌표계가 없는 레이어가 불러와졌을 때
- Default CRS for new projects
새 프로젝트를 위한 기본 좌표계
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
새롭게 추가된 좌표계가 현재 레이어의 좌표계와 다르다면 '실시간' 좌표계 변환이 자동으로 활성화됩니다. 현재 레이어의 좌표계가 사용됩니다.
- Automatically enable 'on the fly' reprojection if layers have different CRS
레이어가 다른 좌표계를 가지고 있을 경우 '실시간' 좌표계 변환을 자동으로 활성화
- Always start new projects with this CRS
항상 이 좌표계로 새 프로젝트 시작
- Enable 'on the &fly' reprojection by default
'즉시' 재투영을 기본값으로 사용(&f)
- Don't enable 'on the fly' reprojection
'실시간' 좌표계 변환을 사용하지 마십시오
- Default datum transformations
기본 데이텀 변환
- Source CRS
원본 좌표계
- Destination CRS
대상 좌표계
- Source datum transform
원본 데이터 변환
- Destination datum transform
대상 데이텀 변환
- Ask for datum transformation when no default is defined
데이텀 변환시 기본값이 정의되어 있지 않으면 물어보기
- Override system locale
시스템 언어설정을 무시하고 사용
- Locale to use instead
대신 사용할 언어
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>참고:</b> 언어설정 변경을 적용하려면 응용 프로그램을 다시 시작해야 함
- Additional Info
추가 정보
- Detected active locale on your system:
사용중인 시스템에서 탐지된 언어설정:
- WMS search address
WMS 검색 주소
- Timeout for network requests (ms)
네트워크 요청 시간 (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
WMS-C/WMTS 타일을 위한 기본 만료 기간 (hours)
- Max retry in case of tile request errors
타일 요청 오류 발생시 최대 재시도 횟수
- User-Agent
사용자-에이전트
- Cache settings
캐시 설정
- Directory
디렉토리
- Size [KiB]
크기 [KiB]
- Clear
초기화
- Use proxy for web access
Web 연결에 프록시 사용
- Host
호스트
- Port
포트
- User
사용자
- Leave this blank if no proxy username / password are required
프록시 사용자 이름 / 암호가 필요하지 않은 경우는 비워둠
- Password
비밀번호
- Proxy type
프록시 유형
- Exclude URLs (starting with)
제외 URL (다음으로 시작하는)
@@ -39876,7 +39568,7 @@ Error: %2
플러그인 소실
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
이 플러그인은 아마 설치되어 있지만 어디에 있는지 알 수 없습니다. 아마 플러그인 패키지가 잘못된 이름의 디렉토리 이름을 포함합니다.
설치되어있는 플러그인 목록을 확인하십시오. 아마 거기에서 플러그인을 찾을 수 있겠지만 어느 것이 잘못된 이름을 포함하는 플러그인인지는 모릅니다. 그것은 또한 내가 이 플러그인이 설치되어 있는지 확인하고 사용 가능한 업데이트에 대해 알려드릴 수 없음을 의미합니다. 플러그인이 작업중일 수 있으니 플러그인 저자에게 연락하여 이 문제를 알려주십시오.
@@ -40600,7 +40292,7 @@ You need to restart QGIS in order to reload it.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40618,7 +40310,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40636,7 +40328,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41498,155 +41190,155 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
QgsProjectProperties
- Layer
레이어
- Type
유형
- Identifiable
정보 표시
- Vector
벡터
- WMS
WMS
- Raster
래스터
- Coordinate System Restriction
좌표계 제한
- No coordinate systems selected. Disabling restriction.
좌표계가 선택되지 않았습니다. 제한을 해제합니다.
- Selection color
선택 색상
- Measure tool (CRS transformation: %1)
측정 도구 (CRS 변환: %1)
- Canvas units (CRS transformation: %1)
캔버스 단위 (CRS 변환: %1)
+ OFF
끄기
+ ON
켜기
- CRS %1 was already selected
좌표계 %1은 이미 선택됨
- Coordinate System Restrictions
좌표계 제한
- The current selection of coordinate systems will be lost.
Proceed?
현재 선택되어있는 좌표계가 없어집니다. 계속하시겠습니까?
- Select print composer
출력 구성기 선택
- Composer Title
구성기 제목
- Select restricted layers and groups
제한 레이어와 그룹 선택
- Enter scale
스케일 입력
- Scale denominator
스케일 눈금
- Load scales
스케일 불러오기
- XML files (*.xml *.XML)
XML 파일 (*.xml * XML)
- Save scales
스케일 저장
- Select a valid symbol
유효한 심볼을 선택하십시오
- Invalid symbol :
잘못된 심볼 :
- Parameters:
매개 변수:
+ Select %1 from pull-down menu to adjust radii
반경 조절을 위해 풀다운 메뉴에서 %1 선택
- Can only use ellipsoidal calculations when CRS transformation is enabled
CRS 변환이 켜져 있어 타원체 기반 계산만 사용 가능
@@ -41671,7 +41363,6 @@ Proceed?
Project title
프로젝트 제목
@@ -41711,37 +41402,37 @@ Proceed?
저장 경로
- Measure tool
측정 도구
- Semi-minor
단반경
- Semi-major
장반경
- Used when CRS transformation is turned off
CRS 변환이 꺼져 있을 때 사용됨
- Canvas units
캐번스 단위
- Meters
미터
- Feet
피트
@@ -41773,97 +41464,97 @@ Proceed?
OWS 서버
- Ellipsoid
(for distance calculations)
거리 측정에 사용하는 타원체
- Degree
도
- Degree display
도 표시
- Decimal degrees
10 진수 각도
- Degrees, Minutes
도, 분
- Degrees, Minutes, Seconds
도, 분, 초
- Precision
정확도
- Automatically sets the number of decimal places in the mouse position display
마우스 위치 표시의 소수점 자릿수를 자동으로 설정
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
마우스 위치를 표시하는데 사용되는 소수점 자리수가 마우스가 한 픽셀 이동할 때마다 변할 수 있게 자동적으로 설정됨
- Automatic
자동
- Sets the number of decimal places to use for the mouse position display
마우스 위치 표시의 소수점 자릿수를 설정
- Manual
수동
- The number of decimal places for the manual option
마우스 위치 표시의 소수점 자릿수를 수동으로 설정
- decimal places
소수점 자릿수
- Project scales
프로젝트 스케일
- ...
...
- Enable 'on the fly' CRS transformation
'실시간' 좌표계 변환 활성화
@@ -41873,69 +41564,69 @@ Proceed?
확인 가능 레이어
- Project layers
프로젝트 레이어
- Layer
레이어
- Type
유형
- Identifiable
정보 검색 가능
- Marker
마커
- Line
선
- Default symbols
기본 심볼
- Fill
채우기
- Color Ramp
색상표
- Transparency
투명도
- %
%
- Style Manager
스타일 관리자
- Options
옵션
@@ -41945,170 +41636,165 @@ Proceed?
릴래이션
- Project file
- 프로젝트 파일
-
-
- Nautical miles
해리
- Assign random colors to symbols
심볼에 임의색 설정
- Service capabilities
서비스 Capabilities
- Person
담당자
- Title
제목
- Organization
조직
- Online resource
온라인 리소스
- E-Mail
이메일
- Phone
전화 번호
- Abstract
요약
- Fees
가격
- Access constraints
접근 제약
- Keyword list
키워드 목록
- WMS capabilities
WMS capabilities
- Add geometry to feature response
객체 응답에 지오메트리를 추가
- Min. X
X 최소값
- Min. Y
Y 최소값
- Max. X
X 최대값
- Max. Y
Y 최대값
- Use Current Canvas Extent
현재 캔버스 영역 이용
- Used
사용 중
- Exclude composers
구성기 제외
- WFS capabilities
WFS capabilities
- WCS capabilities
WCS capabilities
- Exclude layers
레이어 제외
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
JPEG 이미지의 화질 ( 10 : 작은 이미지 - 100 : 최고 화질 )
- Published
출판됨
- Update
갱신
- Insert
삽입
- Delete
삭제
- Unselect all
전체 선택 해제
- Select all
전체 선택
@@ -42119,39 +41805,39 @@ Proceed?
매크로
- Advertised URL
알려진 서비스 URL
- Width
폭
- Height
높이
- Maximums for GetMap request
GetMap 요청의 최대치
- Advertised extent
서비스 가능 범위
- CRS restrictions
CRS 제한
- Python macros
파이썬 매크로
@@ -42265,9 +41951,7 @@ Because of this the projection selector will not work...
The where clause returned %n row(s).
returned test rows
-
- where 절이 %n 행을 반환했습니다.
-
+ where 절이 %n 행을 반환했습니다.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42341,7 +42025,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42352,7 +42036,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42368,7 +42052,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -44034,7 +43718,7 @@ Click on help button to get valid creation options for this format.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45115,9 +44799,7 @@ standard deviation ×
Filter returned %n feature(s)
number of filtered features
-
- 필터가 %n 개의 객체를 반환
-
+ 필터가 %n 개의 객체를 반환
@@ -45806,9 +45488,7 @@ standard deviation ×
Found %n matching feature(s).
test result
-
- %n개의 객체가 일치했습니다.
-
+ %n개의 객체가 일치했습니다.
Validation finished (%n error(s) found).
number of geometry errors
-
- 검증 완료됨 (%n 오류 발견됨).
-
+ 검증 완료됨 (%n 오류 발견됨).
%n selected geometries
selected geometries
-
- 지오메트리 %n개 선택됨
-
+ 지오메트리 %n개 선택됨
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47362,7 +47038,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47976,8 +47652,8 @@ Do you want to overwrite the [%2] relation?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -48014,124 +47690,152 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- 인터페이스 불러오기 실패
+ 인터페이스 불러오기 실패
+ Failed to connect to database
- 데이터베이스 연결 실패
+ 데이터베이스 연결 실패
+ A connection to the SQL Anywhere database cannot be established.
- SQL Anywhere 데이터베이스에 연결할 수 없습니다.
+ SQL Anywhere 데이터베이스에 연결할 수 없습니다.
+ No suitable key column
- 적절한 키 컬럼이 없음
+ 적절한 키 컬럼이 없음
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- 원본 릴래이션 %1는 고유 키에 적합한 컬럼이 없습니다.
+ 원본 릴래이션 %1는 고유 키에 적합한 컬럼이 없습니다.
Quantum GIS는 32bit 이하의 정수를 릴래이션의 고유값으로 요구합니다.
+ Error loading attributes
- 속성 읽기 오류
+ 속성 읽기 오류
+ Ambiguous field!
- 애매한 필드입니다!
+ 애매한 필드입니다!
+ Duplicate field %1 found
- 중복 필드 %1 이 있었습니다
+ 중복 필드 %1 이 있었습니다
+ Read attempt on an invalid SqlAnywhere data source
- 부적합한 SqlAnywhere 데이터 소스에서 읽기 시도
+ 부적합한 SqlAnywhere 데이터 소스에서 읽기 시도
+ SQLAnywhere
- SQL Anywhere
+ SQL Anywhere
+ Error inserting features
- 객체 삽입 오류
+ 객체 삽입 오류
+ Error deleting features
- 객체 삭제 오류
+ 객체 삭제 오류
+ Error adding attributes
- 속성 추가 오류
+ 속성 추가 오류
+ Error deleting attributes
- 속성 삭제 오류
+ 속성 삭제 오류
+ Attribute not found
- 속성을 찾을 수 없음
+ 속성을 찾을 수 없음
+ Error updating attributes
- 속성 업데이트 오류
+ 속성 업데이트 오류
+ Error updating features
- 객체 업데이트 오류
+ 객체 업데이트 오류
+ Error verifying geometry column %1
- 지오메트리 컬럼 %1 유효성 검사 오류
+ 지오메트리 컬럼 %1 유효성 검사 오류
+ Unknown geometry type
- 알 수 없는 지오메트리 타입
+ 알 수 없는 지오메트리 타입
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- 컬럼 %1의 지오메트리 유형 %2는 Quantum GIS에서 현재 지원하지 않습니다.
+ 컬럼 %1의 지오메트리 유형 %2는 Quantum GIS에서 현재 지원하지 않습니다.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- 컬럼 %1은 하나의 SRID에 제한되지 않습니다. Quantum GIS는 유일한 SRID를 필요로 합니다.
+ 컬럼 %1은 하나의 SRID에 제한되지 않습니다. Quantum GIS는 유일한 SRID를 필요로 합니다.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- QGIS는 평면적인 데이터만을 지원하기 때문에 SQL Anywhere 데이터 프로바이더는 평면 투영 호환 데이터로 변환합니다. (SRID = %1).
+ QGIS는 평면적인 데이터만을 지원하기 때문에 SQL Anywhere 데이터 프로바이더는 평면 투영 호환 데이터로 변환합니다. (SRID = %1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Quantum GIS가 평면적인 데이터만을 지원하고 있기 때문에 호환성이 없는 평면 투영이 검색되었습니다. SQL Anywhere 데이터 프로바이더는 평면 데이터 WGS84(SRID=%1)로 변환을 시도합니다.
+ Quantum GIS가 평면적인 데이터만을 지원하고 있기 때문에 호환성이 없는 평면 투영이 검색되었습니다. SQL Anywhere 데이터 프로바이더는 평면 데이터 WGS84(SRID=%1)로 변환을 시도합니다.
+ Mixed Spatial Reference Systems
- 좌표계가 혼합되어 있음
+ 좌표계가 혼합되어 있음
+ Error checking database ReadOnly property
- 데이터베이스 일기전용 속성 검사 오류
+ 데이터베이스 일기전용 속성 검사 오류
+ Error loading SRS definition
- 좌표계 정의 읽기 실패
+ 좌표계 정의 읽기 실패
+ Limited Support of Round Earth SRS
- Round Earth SRS 제한적 지원
+ Round Earth SRS 제한적 지원
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- 컬럼 %1 (%2)이 라운드 어스 좌표계 (SRID = %3). %4에 속하는 지오메트리를 포함합니다.
+ 컬럼 %1 (%2)이 라운드 어스 좌표계 (SRID = %3). %4에 속하는 지오메트리를 포함합니다.
지오메트리 값 캐이퍼빌리티이 금지되었으며 공간 인덱스가 적용되지 않기에 검색 성능이 좋지 않을 것입니다. 성능을 향상시키기 위해서는 지오메트리의 평면 프로젝션을 포함하는 새 컬럼에 공간인덱스를 만들면 좋습니다. 도움이 필요하시면 SQL Anywhere 문서의 ST_SRID(INT)와 ST_Transform(INT) 메소드에 대한 설명을 참조하십시오.
@@ -48266,14 +47970,14 @@ Updates to geometry values will be disabled, and query performance may be poor b
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
'%1'라는 기호는 이미 존재합니다.
덮어 쓰시겠습니까?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
'%1'라는 색상표는 이미 존재합니다.
덮어 쓰시겠습니까?
@@ -49406,7 +49110,7 @@ There was a problem with your symbol database.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50182,33 +49886,25 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- 성공: %n개의 속성을 제거했습니다.
-
+ 성공: %n개의 속성을 제거했습니다.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- 오류: %n개의 속성은 삭제되지 않았습니다.
-
+ 오류: %n개의 속성은 삭제되지 않았습니다.
SUCCESS: %n attribute(s) added.
added attributes count
-
- 성공: %n개의 속성을 추가했습니다.
-
+ 성공: %n개의 속성을 추가했습니다.
ERROR: %n new attribute(s) not added
not added attributes count
-
- 오류: %n개의 속성이 추가되지 않음
-
+ 오류: %n개의 속성이 추가되지 않음
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- 성공: %n개의 속성 값을 변경했습니다.
-
+ 성공: %n개의 속성 값을 변경했습니다.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- 오류: %n개의 속성의 값 변경은 반영되지 않았습니다.
-
+ 오류: %n개의 속성의 값 변경은 반영되지 않았습니다.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- 성공: %n개의 객체가 삭제되었니다.
-
+ 성공: %n개의 객체가 삭제되었니다.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- 오류: %n개의 객체가 삭제되지 않았습니다.
-
+ 오류: %n개의 객체가 삭제되지 않았습니다.
SUCCESS: %n feature(s) added.
added features count
-
- 성공: %n개의 객체를 추가했습니다.
-
+ 성공: %n개의 객체를 추가했습니다.
ERROR: %n feature(s) not added.
not added features count
-
- 오류: %n개의 객체가 추가되지 않았습니다.
-
+ 오류: %n개의 객체가 추가되지 않았습니다.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- 오류: %n개의 객체가 추가되지 않음 - 프로바이더가 객체 추가를 지원 않음.
-
+ 오류: %n개의 객체가 추가되지 않음 - 프로바이더가 객체 추가를 지원 않음.
SUCCESS: %n geometries were changed.
changed geometries count
-
- 성공: %n개의 지오메트리를 변경했습니다.
-
+ 성공: %n개의 지오메트리를 변경했습니다.
ERROR: %n geometries not changed.
not changed geometries count
-
- 오류: %n개의 지오메트리는 변경되지 않았습니다.
-
+ 오류: %n개의 지오메트리는 변경되지 않았습니다.
Options (%n coordinate reference systems available)
crs count
-
- 옵션 (%n 가지 좌표계 사용가능)
-
+ 옵션 (%n 가지 좌표계 사용가능)
Coordinate Reference System (%n available)
crs count
-
- 좌표계 (%n 사용가능)
-
+ 좌표계 (%n 사용가능)
%n Layer(s) selected
selected layer count
-
- %n 개의 레이어가 선택됨
-
+ %n 개의 레이어가 선택됨
(and %n more)
crs
-
- (또한 %n 추가)
-
+ (또한 %n 추가)
%n tile requests in background
tile request count
-
- %n 개의 타일 요청이 백그라운드에 있음
-
+ %n 개의 타일 요청이 백그라운드에 있음
, %n cache hits
tile cache hits
-
- %n 번 캐시 히트
-
+ %n 번 캐시 히트
, %n cache misses.
tile cache missed
-
- %n 번 캐시 실수했습니다.
-
+ %n 번 캐시 실수했습니다.
, %n errors.
errors
-
- %n 번 오류가 발생했습니다.
-
+ %n 번 오류가 발생했습니다.
(and %n more)
crs
-
- (또한 %n 추가)
-
+ (또한 %n 추가)
%n missing row(s)
-
- %n 손실된 행(들)
-
+ %n 손실된 행(들)
%n missing column(s)
-
- %n 손실된 컬럼(들)
-
+ %n 손실된 컬럼(들)
%n tile requests in background
tile request count
-
- %n 개의 타일 요청이 백그라운드에 있음
-
+ %n 개의 타일 요청이 백그라운드에 있음
, %n cache hits
tile cache hits
-
- %n 번 캐시 히트
-
+ %n 번 캐시 히트
, %n cache misses.
tile cache missed
-
- %n 번 캐시 안 됨.
-
+ %n 번 캐시 안 됨.
, %n errors.
errors
-
- %n 번 오류 발생.
-
+ %n 번 오류 발생.
SaDbTableModel
+ Schema
- 스키마
+ 스키마
+ Table
- 테이블
+ 테이블
+ Type
- 유형
+ 유형
+ SRID
- SRID
+ SRID
+ Line Interpretation
- 선 판독
+ 선 판독
+ Geometry column
- 지오메트리 컬럼
+ 지오메트리 컬럼
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- 연결 저장
+ 연결 저장
+ Should the existing connection %1 be overwritten?
- 기존 연결 %1을 덮어 쓰시겠습니까?
+ 기존 연결 %1을 덮어 쓰시겠습니까?
+ Failed to load interface
- 인터페이스 불러오기 실패
+ 인터페이스 불러오기 실패
+ Test connection
- 연결 테스트
+ 연결 테스트
+ Connection to %1 was successful
- %1 연결 성공
+ %1 연결 성공
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- 연결 실패. 설정을 확인하고 다시 시도해 주세요.
+ 연결 실패. 설정을 확인하고 다시 시도해 주세요.
SQL Anywhere 오류 코드: %1
설명: %2
@@ -53587,276 +53249,348 @@ SQL Anywhere 오류 코드: %1
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- 새로운 SQL Anywhere 연결을 만들기
+ 새로운 SQL Anywhere 연결을 만들기
+ Connection Information
- 연결 정보
+ 연결 정보
+ Name
- 이름
+ 이름
+ Host
- 호스트
+ 호스트
+ Port
- 포트
+ 포트
+ Server
- 서버
+ 서버
+ Database
- 데이터베이스
+ 데이터베이스
+ Connection Parameters
- 연결 매개 변수
+ 연결 매개 변수
+ Username
- 사용자 이름
+ 사용자 이름
+ Password
- 비밀번호
+ 비밀번호
+ Name of the new connection
- 새 연결 이름
+ 새 연결 이름
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- 데이터베이스 서버를 호스팅 하는 컴퓨터의 이름 또는 IP 주소 (로컬 연결의 경우 공백)
+ 데이터베이스 서버를 호스팅 하는 컴퓨터의 이름 또는 IP 주소 (로컬 연결의 경우 공백)
+ Port number used by the database server (leave blank for default 2638)
- 데이터베이스 서버가 사용하는 포트 번호 (기본 2638의 경우 공백)
+ 데이터베이스 서버가 사용하는 포트 번호 (기본 2638의 경우 공백)
+ Name of the database server (leave blank for default server on host)
- 데이터베이스 서버 이름 (호스트의 기본 서버의 경우 공백)
+ 데이터베이스 서버 이름 (호스트의 기본 서버의 경우 공백)
+ Name of the database (leave blank for default database on server)
- 데이터 이름 (서버의 기본 데이터베이스의 경우 공백)
+ 데이터 이름 (서버의 기본 데이터베이스의 경우 공백)
+ Additional connection parameters
- 추가 연결 매개 변수
+ 추가 연결 매개 변수
+ Database username
- 데이터베이스 사용자 이름
+ 데이터베이스 사용자 이름
+ Database password
- 데이터베이스 암호
+ 데이터베이스 암호
+ Save the connection username in the registry
- 연결 사용자 이름을 레지스트리에 저장
+ 연결 사용자 이름을 레지스트리에 저장
+ Save Username
- 사용자 이름 저장
+ 사용자 이름 저장
+ &Test Connect
- 연결 테스트(&T)
+ 연결 테스트(&T)
+ Save the connection password in the registry (WARNING: NOT SECURE)
- 연결 암호를 레지스트리에 저장 (경고: 보안성 없음)
+ 연결 암호를 레지스트리에 저장 (경고: 보안성 없음)
+ Save Password
- 암호 저장
+ 암호 저장
+ Encrypt packets using simple encryption
- 단순 암호화를 사용하여 패킷 암호화
+ 단순 암호화를 사용하여 패킷 암호화
+ Simple Encryption
- 간단한 암호화
+ 간단한 암호화
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- 일부 레이어 속성, 예를 들어 밀도와 공간범위 등에 추정치 사용 (성능 향상됨)
+ 일부 레이어 속성, 예를 들어 밀도와 공간범위 등에 추정치 사용 (성능 향상됨)
+ Estimate table metadata
- 테이블 메타데이터 추정
+ 테이블 메타데이터 추정
+ Search for geometry columns in tables owned by other users
- 다른 사용자 소유 테이블의 지오메트리 컬럼 검색
+ 다른 사용자 소유 테이블의 지오메트리 컬럼 검색
+ Search other users' tables
- 다른 사용자의 테이블 검색
+ 다른 사용자의 테이블 검색
SaSourceSelect
+ &Add
- 추가(&A)
+ 추가(&A)
+ &Set Filter
- 세트 필터 (&S)
+ 세트 필터 (&S)
+ Wildcard
- 와일드카드
+ 와일드카드
+ RegExp
- 정규식
+ 정규식
+ All
- 모두
+ 모두
+ Schema
- 스키마
+ 스키마
+ Table
- 테이블
+ 테이블
+ Type
- 유형
+ 유형
+ SRID
- SRID
+ SRID
+ Line Interpretation
- 선 판독
+ 선 판독
+ Geometry column
- 지오메트리 컬럼
+ 지오메트리 컬럼
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- %1 연결과 모든 관련설정을 제거하시겠습니까?
+ %1 연결과 모든 관련설정을 제거하시겠습니까?
+ Confirm Delete
- 삭제 확인
+ 삭제 확인
+ Select Table
- 테이블을 선택
+ 테이블을 선택
+ You must select a table in order to add a layer.
- 레이어를 추가하려면 테이블을 선택하십시오.
+ 레이어를 추가하려면 테이블을 선택하십시오.
+ Failed to load interface
- 인터페이스 불러오기 실패
+ 인터페이스 불러오기 실패
+ Connection failed
- 연결 실패
+ 연결 실패
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- 데이터베이스 %1에 연결이 실패했습니다. 설정을 확인하고 다시 시도하십시오.
+ 데이터베이스 %1에 연결이 실패했습니다. 설정을 확인하고 다시 시도하십시오.
SQL Anywhere 오류 코드: %2
설명: %3
+ No accessible tables found
- 액세스가능한 테이블을 찾을 수 없음
+ 액세스가능한 테이블을 찾을 수 없음
+ Database connection was successful, but no tables containing geometry columns were %1.
- 데이터베이스 연결에 성공 했습니다만, 지오메트리 컬럼을 가진 테이블이 %1에 없습니다.
+ 데이터베이스 연결에 성공 했습니다만, 지오메트리 컬럼을 가진 테이블이 %1에 없습니다.
+ found
- 발견됨
+ 발견됨
+ found in your schema
- 사용자의 스키마에서 발견됨
+ 사용자의 스키마에서 발견됨
SaSourceSelectBase
+ Add SQL Anywhere layer
- SQL Anywhere 레이어 추가
+ SQL Anywhere 레이어 추가
+ SQL Anywhere Connections
- SQL Anywhere 연결
+ SQL Anywhere 연결
+ Delete
- 삭제
+ 삭제
+ Edit
- 편집
+ 편집
+ New
- 새로 만들기
+ 새로 만들기
+ Connect
- 연결
+ 연결
+ Search options
- 검색 옵션
+ 검색 옵션
+ Search
- 검색
+ 검색
+ Search mode
- 검색 모드
+ 검색 모드
+ Search in columns
- 컬럼에서 검색
+ 컬럼에서 검색
SaveAsPythonScriptAction
I/O error
- I/O 에러
+ I/O 에러
Unable to save edits. Reason:
%s
- 편집을 저장할 수 없습니다. 원인:
+ 편집을 저장할 수 없습니다. 원인:
%s
@@ -54191,20 +53925,24 @@ SQL Anywhere 오류 코드: %2
SqlAnywhere
+ Add SQL Anywhere Layer...
- SQL Anywhere 레이어 추가...
+ SQL Anywhere 레이어 추가...
+ Store vector layers within a SQL Anywhere database
- 벡터 레이어를 SQL Anywhere 데이터베이스에 저장
+ 벡터 레이어를 SQL Anywhere 데이터베이스에 저장
+ Invalid Layer
- 잘못된 레이어
+ 잘못된 레이어
+ %1 is an invalid layer and cannot be loaded.
- %1는 잘못된 레이어이기에 불러올 수 없습니다.
+ %1는 잘못된 레이어이기에 불러올 수 없습니다.
@@ -55540,7 +55278,7 @@ Run topology check again.
context_help
- <h3>Database connection</h3>
<h3>데이터베이스 연결</h3>
@@ -55758,7 +55496,7 @@ triweight 커널은 Epanechnikov 커널 보다 가까운 점에 대해 가중치
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55768,7 +55506,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55818,7 +55556,7 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
<h3>사용자 정의 좌표계 정의</h3>
QGIS가 사용자가 원하는 좌표계를 제공하지 않는다면, 사용자 정의 좌표계를 만들 수 있습니다. <p>
@@ -55850,7 +55588,7 @@ QGIS에서 사용자 정의 좌표계를 만들기 위해서는 Proj.4 투영
<table>
<tr>
<td>
- <p align='justify'>
+ <p align='justify'>
The QGIS Python Console is an interactive shell for the python command executions.
It also has a python file editor that allows you to edit and save your python scripts.
Both console and editor are based on PyQScintilla2 package.<br>
@@ -55906,7 +55644,7 @@ QGIS에서 사용자 정의 좌표계를 만들기 위해서는 Proj.4 투영
</tr>
</table>
<b><i>Toolbar:</i></b>
- <table width="100%" id='toolbarConsole'>
+ <table width="100%" id='toolbarConsole'>
<tr>
<td><img src="qrc:/images/themes/default/console/iconClearConsole.png" /></td>
<td colspan="2">Clear python console</td>
@@ -56001,8 +55739,8 @@ that will be automatically deleted after running.</li>
<br>
<li><label>Using prepared APIs file:</label> If checked the *.pap file will be used for code completion. To generate a prepared APIs file you have to load least an *.api file and then compile it by clicking on <label>Compile Apis...</label> button.</li>
</ul>
-<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
- <b>Note:</b> To save the state of console's widgets you have to close the Python Console
+<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
+ <b>Note:</b> To save the state of console's widgets you have to close the Python Console
from the close button. This allows you to save the geometry to be restored to the next start.
</p>
@@ -56184,7 +55922,7 @@ This dialog allows you to define the settings for a connection to a Oracle datab
<li> <label>Only look in meta data table</label> Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.
-<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
+<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56199,7 +55937,7 @@ the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied. The table
geometry is determined from the first 100 non-null geometry rows in the table.
<li> <label>Only existing geometry types</label> Only list the existing
-geometry types and don't offer to add others.
+geometry types and don't offer to add others.
</ul>
@@ -56380,10 +56118,10 @@ The field calculator allows you to update fields with expressions.
</td>
<td>value of field <tt>column_name</tt></td>
</tr>
-<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
+<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
<tr><td><tt>number</tt></td><td>number</td></tr>
<tr><td>NULL</td><td>null value</td></tr>
-<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
+<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
<tr><td>ln(<tt>a</tt>)</td><td>natural log (i.e. base e) of <tt>a</tt></td></tr>
<tr><td>log10(<tt>a</tt>)</td><td>log base 10 of <tt>a</tt></td></tr>
<tr><td>log(<tt>a</tt>,<tt>b</tt>)</td><td>log base <tt>b</tt> of <tt>a</tt></td></tr>
@@ -56508,8 +56246,8 @@ Draws a scale bar on the map.
<p>
You can control the style and placement, as well as the labeling of the bar.
QGIS only supports displaying the scale in the same units as your map frame. So
-if the units of your layers are in meters, you can't create a scale bar in
-feet. Likewise if you are using decimal degrees, you can't create a scale bar
+if the units of your layers are in meters, you can't create a scale bar in
+feet. Likewise if you are using decimal degrees, you can't create a scale bar
to display distance in meters.</p> <p>
To add a scale bar:
<ol>
@@ -56568,7 +56306,7 @@ This dialog allows you to define the settings for a connection to a PostgreSQL d
<li> <label>Only look in the geometry_columns table</label> Indicates that only "listed" geometry columns should be used - opposed to scanning all tables for geometry columns.
-<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
+<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56828,8 +56566,8 @@ To avoid digitizing all vertices of the common boundary select <label>Avoi
<a name="crs">
<h4>Coordinate Reference System (CRS) Tab</h4>
</a>
-The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
-<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
+The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
+<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
<p>You can find a coordinate system by entering its name, EPSG code or the QGIS ID and clicking the <label>Find</label> button.
<p>The list of recently used coordinate systems will be available on the bottom for quick access.
@@ -57263,7 +57001,7 @@ To update the extent of a bookmark, click on it then click the <label>Upda
<p><label>Topology tolerance</label> - the distance in units of the project. If the distance of two points falls short the topological tolerance, they are considered to be the vertex. A topological tolerance value greater than zero slows down the plugin, but you can use not ideal data sources.</p>
<h5>Note</h5>
-<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
+<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
<a name="LayerSettings">
<h4>Transport layer settings</h4>
@@ -57397,6 +57135,7 @@ are sometimes limited (e.g. for shape files) or behave diffently.
+ <h3>Create a New SQL Anywhere Connection</h3>
This dialog allows you to define the settings for a connection to a
SQL Anywhere database.
@@ -57425,11 +57164,11 @@ SQL Anywhere database.
<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
-<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
</ul>
- <h3>새 SQL Anywhere 연결 만들기</h3>
+ <h3>새 SQL Anywhere 연결 만들기</h3>
이 대화상자는 SQL Anywhere 데이터베이스 연결 설정을 할 수 있도록 해 줍니다.
<p>
<ul>
@@ -57456,7 +57195,7 @@ SQL Anywhere database.
The open vector layer dialog is used to add vector data to the QGIS map view. Vector data are spatial data described using geometries of points, lines and polygons (enclosed areas).</p>
QGIS supports vector data in a number of formats, including those supported by the OGR library data provider plugin, such as ESRI shape files, MapInfo MIF (interchange format) and MapInfo TAB (native format).</p>
QGIS supports PostGIS layers in a PostgreSQL database and SpatiaLite layers. Support for additional data types (eg. delimited text) is provided by additional data provider plugins. A list of OGR supported vector formats can be found in Appendix A.1 of the User Guide.</p>
-Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
+Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
<h3>벡터 레이어 열기 대화 상자 </h3>
@@ -57544,10 +57283,10 @@ It is possible to check how often QGIS will download the list and update informa
from the available repositories.
</p>
<p>
-By checking the 'Show experimental plugins' checkbox, all plugins will be shown
-in the lists, even the ones that are considered 'experimental' by the author.
+By checking the 'Show experimental plugins' checkbox, all plugins will be shown
+in the lists, even the ones that are considered 'experimental' by the author.
-<table border=1 width='95%' align='center'><tr><td>
+<table border=1 width='95%' align='center'><tr><td>
Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
</td></tr></table>
@@ -57696,7 +57435,7 @@ Define placement algorithm for labels. Choose between <label>central point
In the <label>Digitizing</label> tab you can define settings for digitizing line width and color.
<h5>Snapping</h5>
Here you can define a general, project wide snapping tolerance. <p>
-You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
+You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
A layer based snapping tolerance can be defined by choosing <label>Settings</label> (or <label>File</label>) > <label>Project Properties...</label>. In the <label>General</label> tab, section <label>Digitize</label> you can click on <label>Snapping options...</label> to enable and adjust snapping mode and tolerance on a layer basis.
<h5>Vertex markers</h5>
You can define marker style as <label>Semi transparent circle</label>, <label>Cross</label> or <label>None</label> and size; you can also set showing markers only for selected features.
@@ -57817,6 +57556,7 @@ In this section you can see the list of attributes. To delete one of them, click
+ <h3>Add SQL Anywhere Tables</h3>
This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
<p>
@@ -57855,7 +57595,7 @@ To filter a layer before adding it to the map, either double click on its name o
</a>
Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
- <h3>SQL Anywhere 테이블 추가</h3>
+ <h3>SQL Anywhere 테이블 추가</h3>
이 대화 상자는 사용자가 SQL Anywhere 레이어(지오메트리가 있는 테이블)를 QGIS 지도 캔버스에 추가할 수 있게 해줍니다.
<p>
<a href="#connect">연결</a><br/>
@@ -58032,7 +57772,7 @@ It is safer to use an explicit coding if the QGIS project needs to be portable.
or degrees/minutes. QGIS is quite permissive in its interpretation of degrees/minutes/seconds.
A valid DMS coordinate will contain three numeric fields with an optional hemisphere prefix or suffix
(N, E, or + are positive, S, W, or - are negative). Additional non numeric characters are
- generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
+ generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
</li>
</ul>
<p>For well known text geometry the following options apply:</p>
@@ -58082,8 +57822,8 @@ are escaped.</p>
(that is, to stop it being treated as a new line, delimiter, or quote character).
</p>
<p>Escape characters that are also quote characters have much more limited effect. They only apply within quotes and only escape themselves. For example, if
-<tt>'</tt> is a quote and escape character, then the string
-<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
+<tt>'</tt> is a quote and escape character, then the string
+<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
</p>
@@ -58856,7 +58596,7 @@ For support send a mail to scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -59624,7 +59364,7 @@ Plugin will not be enabled.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -59640,9 +59380,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
<h3>week() 함수</h3>
@@ -59667,7 +59407,7 @@ date에서 주 수를 추출 하거나,
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -59692,7 +59432,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
@@ -59727,7 +59467,7 @@ return a result.
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -59741,7 +59481,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
<h3>right() 함수</h3>
@@ -59762,7 +59502,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -59772,7 +59512,7 @@ This group contains functions for manipulating colors
이 그룹은 색상을 조작하기 위한 함수를 포함함
- <h3>length() function</h3>
Returns the length of a string.
@@ -59785,7 +59525,7 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
<h3>length() 함수</h3>
문자열의 길이를 반환합니다.
@@ -59803,7 +59543,7 @@ Returns the length of a string.
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -59816,7 +59556,7 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
<h3>upper() 함수</h3>
문자열을 대문자로 바꿉니다.
@@ -59833,9 +59573,9 @@ Converts a string to upper case letters.
upper('hello WOrld') → 'HELLO WORLD'</p>
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -59845,8 +59585,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
<h3>intersects 함수</h3>
지오메트리들이 공간적으로 교차(영역의 어떤 부분이던지 공유)하면 1을 반환하고 그렇지 않으면 0을 반환.
@@ -59863,7 +59603,7 @@ b → geometry
<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -59877,7 +59617,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
<h3>left() 함수</h3>
@@ -59898,7 +59638,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -59927,7 +59667,7 @@ Note: This function is only available in some contexts and will be 0 otherwise.
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -59960,9 +59700,9 @@ Rounds a number upwards.
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -59973,7 +59713,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
<h3>toreal 함수</h3>
문자열을 실수로 변환. 만약 실수로 해석할 수 없으면(예: '123.56asd'은 잘못된 값) 변경하지 않음. 만약 정밀도가 변환 결과보다 작을 경우 숫자는 반올림 됨
@@ -59991,7 +59731,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -60018,7 +59758,7 @@ Retrieves a x coordinate of the current feature
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -60047,14 +59787,14 @@ None
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -60063,8 +59803,8 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
<h3>strpos() 함수</h3>
문자열에서 정규 표현식의 인덱스를 반환
@@ -60086,7 +59826,7 @@ Returns -1 if the expression isn't found.
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -60122,7 +59862,7 @@ This function takes two arguments.
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -60157,7 +59897,7 @@ None
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -60190,7 +59930,7 @@ None
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60219,7 +59959,7 @@ geom → a geometry
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -60252,7 +59992,7 @@ Rounds a number downwards.
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60281,9 +60021,9 @@ geom → a geometry
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -60294,7 +60034,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
<h3>toint() 함수</h3>
문자열을 정수로 변환. 정수로 변환될 수 없는 값(예: '123asd')인 경우 아무것도 변경되지 않음.
@@ -60312,7 +60052,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -60339,7 +60079,7 @@ Retrieves a y coordinate of the current feature
- <h3>tostring() function</h3>
Converts a number to string.
@@ -60352,7 +60092,7 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
<h3>tostring() 함수</h3>
숫자를 문자열로 변환.
@@ -60370,7 +60110,7 @@ Converts a number to string.
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -60398,7 +60138,7 @@ None
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -60433,7 +60173,7 @@ arguments to determine the quadrant of the result
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -60462,7 +60202,7 @@ Returns sinus of an angle.
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -60478,9 +60218,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
<h3>month() 함수</h3>
@@ -60533,7 +60273,7 @@ None
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -60549,9 +60289,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
<h3>day() 함수</h3>
@@ -60575,12 +60315,12 @@ from a <code>Interval</code>
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -60604,7 +60344,7 @@ Convert a string into Qt data type.
<code>todate('2012-05-04') → 2012-05-04</code><br>
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60621,7 +60361,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
<h3>lpad() 함수</h3>
채움 문자를 이용해 주어진 폭만큼 채운 문자열을 반환.
@@ -60641,7 +60381,7 @@ using the fill character.
<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -60669,14 +60409,14 @@ Returns arcuscosinus of a value in radians.
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60690,7 +60430,7 @@ actually inserted, ie. when building queries.
</p>
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -60727,7 +60467,7 @@ This function takes two arguments.
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -60735,14 +60475,14 @@ This group contains functions that operate on geometry objects e.g length, area.
이 그룹에는 지오메트리에 적용될 수 있는 함수(예: length, area)를 포함하고 있습니다.
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60757,7 +60497,7 @@ actually inserted, ie. when building queries.
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -60786,7 +60526,7 @@ None
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -60815,7 +60555,7 @@ Returns exponential of an value.
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60832,7 +60572,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
<h3>rpad() 함수</h3>
@@ -60855,7 +60595,7 @@ using the fill character.
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -60900,7 +60640,7 @@ use <code>round(decimal)</code> to round to the nearest integer<b
- <h3>$now function</h3>
Returns the current date and time
@@ -60929,7 +60669,7 @@ None
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -60944,7 +60684,7 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
<h3>color_hsl() 함수</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -60964,7 +60704,7 @@ Returns a string representation of a color based on its hue, saturation, and lig
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -60977,8 +60717,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -61024,7 +60764,7 @@ accelerating as the input values approach the domain maximum. Smaller exponents
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -61036,7 +60776,7 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
<h3>convexHull 함수</h3>
지오메트리의 컨벡스 헐을 반환. 이것은 집합 내의 모든 지오메트리를 포함하는 가장 작은 볼록 다각형으로 표현된다.
@@ -61053,7 +60793,7 @@ a → geometry
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -61065,7 +60805,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
<h3>union 함수</h3>
지오메트리들이 융합된 점 집합으로 표현되는 지오메트리를 반환한다.
@@ -61082,7 +60822,7 @@ b → geometry
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61111,7 +60851,7 @@ geom → a geometry
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61140,7 +60880,7 @@ geom → a geometry
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61169,7 +60909,7 @@ geom → a geometry
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -61181,8 +60921,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>contains 함수</h3>
B에 있는 어떤 포인트도 A의 밖에 없고, B의 하나 이상의 포인트가 A 안에 있으면 true를 반환.
@@ -61200,7 +60940,7 @@ geometry → geometry
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -61215,8 +60955,8 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
<h3>wordwrap() 함수</h3>
최대/최소 글자수로 래핑된 문자열을 반환한다.
@@ -61237,7 +60977,7 @@ Returns a string wrapped to a maximum/minimum number of characters.
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -61253,7 +60993,7 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
<h3>color_rgb() 함수</h3>
@@ -61274,7 +61014,7 @@ Returns a string representation of a color based on its red, green, and blue com
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -61291,7 +61031,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
<h3>color_cmyk() 함수</h3>
@@ -61313,7 +61053,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -61325,7 +61065,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
<h3>intersection 함수</h3>
지오메트리 a와 지오메트리 b가 공유되는 부분을 표현하는 지오메트리를 반환한다.
@@ -61342,7 +61082,7 @@ geometry → geometry
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -61352,12 +61092,12 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
@@ -61387,7 +61127,7 @@ may not give the expected results if you move your Quantum project.
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -61398,8 +61138,8 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
@@ -61426,7 +61166,7 @@ A가 B와 같으면 1을 반환.
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -61441,7 +61181,7 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
<h3>color_hsv() 함수</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -61461,7 +61201,7 @@ Returns a string representation of a color based on its hue, saturation, and val
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -61472,9 +61212,9 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
<h3>ILIKE 표현식</h3>
첫 번째 파라미터가 대소문자 가리지 않고 두번째 패턴과 일치하면 1을 반환한다. ILKIE 대신 LIKE를 대소문자를 가리는 일치 확인을 위해 사용할 수 있다. 숫자에 대해서도 동작한다.
@@ -61492,7 +61232,7 @@ None
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -61503,9 +61243,9 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
<h3>LIKE 표현식</h3>
첫 번째 파라미터가 주어진 패턴과 일치하면 1을 반환한다. 숫자에 대해서도 동작한다.
@@ -61523,7 +61263,7 @@ None
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61552,7 +61292,7 @@ geom → a geometry
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -61563,7 +61303,7 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
<h3>geomFromGML 함수</h3>
@@ -61581,7 +61321,7 @@ text → GML representation of a geometry
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -61590,7 +61330,7 @@ This group contains functions for handling date and time data.
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -61602,8 +61342,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
<h3>combine 함수</h3>
지오메트리 a와 지오메트리 b의 조합을 반환한다.
@@ -61622,9 +61362,9 @@ geometry → geometry
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -61634,8 +61374,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>intersects 함수</h3>
지오메트리들이 공간적으로 교차(영역의 어떤 부분이던지 공유)하면 1을 반환하고 그렇지 않으면 0을 반환.
@@ -61653,7 +61393,7 @@ b → geometry
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -61697,7 +61437,7 @@ Restricts an input value to a specified range.
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -61709,8 +61449,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
<h3>disjoint 함수</h3>
지오메트리들이 "공간적으로 교차"하지 않으면 1을 반환 - 어떤 공간도 함께 공유하지 않는 경우.
@@ -61728,7 +61468,7 @@ b → geometry
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -61739,7 +61479,7 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
<h3>geomFromWKT 함수</h3>
@@ -61756,7 +61496,7 @@ text → 지오메트리의 Well-Known Text (WKT) 표현
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -61788,43 +61528,7 @@ b → 버퍼를 위한 거리
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -61853,10 +61557,10 @@ None
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -61884,25 +61588,7 @@ None
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -61914,8 +61600,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>crosses 함수</h3>
제공된 지오메트리들이 공유하는 내부 점이 전부는 아니고 일부인 경우 1을 반환한다.
@@ -61933,7 +61619,7 @@ geometry → geometry
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -61960,7 +61646,7 @@ a → geometry
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -61972,8 +61658,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>touches 함수</h3>
지오메트리들이 공유하는 점이 적어도 하나 있지만, 내부가 교차하지 않는다면 1을 반환한다.
@@ -61991,7 +61677,7 @@ b → geometry
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -62003,8 +61689,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>overlaps 함수</h3>
지오메트리들이 같은 차원에서 공간을 공유하지만, 서로 완전히 포함되지 않는다면 1을 반환한다.
@@ -62022,7 +61708,7 @@ b → geometry
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -62053,7 +61739,7 @@ None
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -62082,7 +61768,7 @@ None
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -62113,7 +61799,7 @@ None
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -62142,7 +61828,7 @@ b → geometry
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -62154,8 +61840,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
<h3>within 함수</h3>
지오메트리 a가 완전히 지오메트리 b의 안에 들어가면 1을 반환한다.
@@ -62173,7 +61859,7 @@ geometry → geometry
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -62210,7 +61896,7 @@ $map → "canvas" (within the main QGIS main canvas)</pre>
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -62222,7 +61908,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
<h3>distance 함수</h3>
두 지오메트리 사이의 (좌표계 상의)최소 거리를 프로젝션된 단위로 반환한다.
@@ -62239,7 +61925,7 @@ b → geometry
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -62251,7 +61937,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
<h3>difference 함수</h3>
지오메트리 adhk 지오메트리 b가 교차하지 않는 부분을 표현하는 지오메트리를 반환한다.
@@ -62268,7 +61954,7 @@ geometry → geometry
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -62279,8 +61965,8 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
@@ -62301,7 +61987,7 @@ None
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -62313,7 +61999,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
<h3>symDifference 함수</h3>
a와 b가 교차하지 않는 부분을 표현하는 지오메트리를 반환한다.
@@ -62330,7 +62016,7 @@ geometry → geometry
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -62359,12 +62045,12 @@ None
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -62388,7 +62074,7 @@ Converts a string to a interval type. Can be used to take days, hours, month, e
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -62404,10 +62090,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
<h3>hour() 함수</h3>
@@ -62432,7 +62118,7 @@ datetime 혹은 time에서 시간을 추출하거나, <code>Interval</c
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -62448,7 +62134,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
<h3>color_hsla() 함수</h3>
색상, 채도, 명도와 알파(투명도)를 기반으로 한 색을 문자열로 표현해 반환.
@@ -62469,7 +62155,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -62496,7 +62182,7 @@ None
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
@@ -62505,12 +62191,12 @@ This group contains functions that operate on record identifiers.
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -62534,7 +62220,7 @@ Convert a string into Qt time type.
<code>totime('12:30:01') → 12:30:01</code><br>
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -62549,7 +62235,7 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
<h3>replace() 함수</h3>
제공되는 문자열로 대체된 문자열을 반환한다.
@@ -62569,7 +62255,7 @@ Returns a string with the the supplied string replaced.
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
@@ -62577,7 +62263,7 @@ This group contains functions to handle conditional checks in expressions.
이 그룹에는 표현식 안에서 조건 검사를 처리하는 함수들이 있습니다.
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -62606,7 +62292,7 @@ abs(<i>value</i>)<br>
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -62638,7 +62324,7 @@ Returns the largest value in a set of values.
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -62666,7 +62352,7 @@ Returns square root of a value
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
@@ -62674,7 +62360,7 @@ This group contains functions that operate on condition.
이 그룹은 조건에 따라 작동하는 기능들을 포함하고 있습니다.
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -62692,7 +62378,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
<h3>color_cmyka() 함수</h3>
@@ -62715,7 +62401,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -62751,7 +62437,7 @@ to.
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -62767,9 +62453,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
<h3>year() 함수</h3>
@@ -62793,7 +62479,7 @@ from a <code>Interval</code>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -62818,7 +62504,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
@@ -62851,7 +62537,7 @@ return a result.
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -62887,7 +62573,7 @@ This function takes two arguments.
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -62916,7 +62602,7 @@ geom → a geometry
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -62959,7 +62645,7 @@ Transforms a given value from an input domain to an output range using linear in
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -62972,7 +62658,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
<h3>trim() 함수</h3>
문자열 앞 뒤의 공백문자(공백, 탭 등)을 모두 제거합니다.
@@ -62990,7 +62676,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -63006,10 +62692,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
<h3>minute() 함수</h3>
@@ -63034,7 +62720,7 @@ datetime 혹은 time에서 분을 추출하거나, <code>Interval</code
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -63063,9 +62749,9 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
<h3>age() 함수</h3>
@@ -63101,7 +62787,7 @@ use <code>day</code> to extract number of days<br>
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -63136,7 +62822,7 @@ This function takes one argument.
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
@@ -63145,7 +62831,7 @@ This group contains functions to convert on data type to another e.g string to i
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -63174,7 +62860,7 @@ Returns cosinus of an angle.
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -63182,7 +62868,7 @@ This group contains operators e.g + - *
연산자 그룹은 +, -, * 같은 연산자를 포함하고 있음
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -63198,10 +62884,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
<h3>second() 함수</h3>
@@ -63226,7 +62912,7 @@ datetime 혹은 time에서 초를 추출하거나, <code>Interval</code
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -63254,7 +62940,7 @@ Returns arcustanget of a value in radians.
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -63281,7 +62967,7 @@ None
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -63295,7 +62981,7 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
<h3>title() 함수</h3>
모든 단어를 타이틀 표시법으로 변환(모든 단어의 첫글자는 대문자로, 나머지는 소문자로)
@@ -63313,7 +62999,7 @@ capital letter).
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -63327,7 +63013,7 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
<h3>regexp_match() 함수</h3>
만약 문자열의 일부가 주어진 정규식에 맞다면 true 반환.
@@ -63346,7 +63032,7 @@ Returns true if any part of a string matches the supplied regular expression.
- <h3>substr() function</h3>
Return a part of a string
@@ -63361,7 +63047,7 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
<h3>substr() 함수</h3>
문자열의 일부분을 반환
@@ -63381,12 +63067,12 @@ Return a part of a string
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -63412,7 +63098,7 @@ Format a string using supplied arguments.
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -63427,7 +63113,7 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
<h3>regexp_replace() 함수</h3>
정규식을 적용해서 교체된 문자열을 반환.
@@ -63446,7 +63132,7 @@ Returns a string with the supplied regular expression replaced.
regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -63460,7 +63146,7 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
<h3>regexp_substr() 함수</h3>
제공된 정규식에 맞는 문자열을 잘라 반환.
@@ -63479,7 +63165,7 @@ Returns the portion of a string which matches a supplied regular expression.
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -63508,7 +63194,7 @@ None
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -63525,7 +63211,7 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
<h3>color_rgba() 함수</h3>
@@ -63547,7 +63233,7 @@ Returns a string representation of a color based on its red, green, blue, and al
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -63576,7 +63262,7 @@ None
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
@@ -63584,7 +63270,7 @@ This group contains math functions e.g square root, sin and cos
이 그룹에는 수학 함수들이 포함됨. 예: 제곱근, sin, cos
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -63616,7 +63302,7 @@ Returns the smallest value in a set of values.
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -63627,7 +63313,7 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
<h3>lower() 함수</h3>
문자열을 소문자로 변환함
@@ -63643,7 +63329,7 @@ Converts a string to lower case letters.
수
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -63672,7 +63358,7 @@ None
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
@@ -63681,7 +63367,7 @@ This group contains functions that operate on strings e.g replace, convert to up
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -63694,7 +63380,7 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
<h3>concat() 함수</h3>
여러 개의 문자열을 하나로 병합
@@ -63712,7 +63398,7 @@ Concatenates several strings to one.
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -63729,8 +63415,8 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
<h3>coalesce() 함수</h3>
@@ -63756,7 +63442,7 @@ This function can take any number of arguments.
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -63784,12 +63470,12 @@ Returns arcussinus of a value in radians.
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -63813,12 +63499,12 @@ Convert a string into Qt data time type.
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -63849,14 +63535,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -63875,14 +63561,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -63987,7 +63673,7 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
<h3>format_date() 함수</h3>
날짜 혹은 문자열 형식을 일반 문자열 형식으로 포매팅합니다. Qt data time 형식 문자열을 사용합니다. 다음을 참조하세요. <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
@@ -64166,7 +63852,7 @@ Format a date type or string into a custom string format. Uses Qt data time form
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -64195,7 +63881,7 @@ Returns tangent of an angle.
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -64224,7 +63910,7 @@ None
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -64258,7 +63944,7 @@ This function takes one argument.
<code>ln(2.7182818284590452354) → 1</code><br>
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -64274,7 +63960,7 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
<h3>color_hsva() 함수</h3>
색상, 채도, value, 알파(투명도)를 기반으로 한 색을 문자로 표현해 반환
@@ -66849,4 +66535,4 @@ Returns a string representation of a color based on its hue, saturation, value a
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_mn.ts b/i18n/qgis_mn.ts
index b12898c057e..c0d8dd3b9ab 100644
--- a/i18n/qgis_mn.ts
+++ b/i18n/qgis_mn.ts
@@ -1,59 +1,54 @@
-
-
-
+
APIsDialogPythonConsole
Generating prepared API file (please wait)...
-
CharacterWidget
-
- <p>Character: <span style="font-size: 24pt; font-family: %1%2</span><p>Value: 0x%3">
- <p>Тэмдэгт: <span style="font-size: 24pt; font-family: %1%2</span><p>Value: 0x%3">
-
<p>Character: <span style="font-size: 24pt; font-family: %1">%2</span><p>Value: 0x%3
-
ConfigDialog
Search...
- Хайх...
Setting
-
Value
- Утга
+
Providers
- Нийлүүлэгч
+
Wrong value
- Буруу утга
Wrong parameter value:
%1
- Буруу параметр утга:
+%1
ConnectionItem
Unable to connect
-
@@ -62,7 +57,6 @@
Coordinate Capture
- Дэлгэцэн дэх курсорын байрлалаар зургын орон зайн солбицлын утгыг авна
Солбицлын утгыг авах
@@ -85,16 +79,12 @@
Coordinate in your selected CRS (lat,lon or east,north)
-
Coordinate in map canvas coordinate reference system (lat,lon or east,north)
-
-
- Coordinate in your selected CRS
- Сонгогдсон тогтолцоон дох солбицол
+
Click to enable mouse tracking. Click the canvas to stop
-
DBManager
Sorry
-
No database selected or you are not connected to it.
-
Select the table you want export to file.
-
DB Manager
-
Info
- Мэдээ
+
Table
- Хүснэгт
+
Preview
- Тойм
+
&Database
- &Өгөгдлийн сан
+
&Schema
-
&Table
-
&Refresh
-
&SQL window
-
&Exit
-
&Import layer/file
-
&Export to file
-
DBManagerPlugin
Sorry
-
Unable to find a valid unique field
-
Copy
- Хуулах
+
DB Manager
-
Server version:
-
Host:
-
User:
-
Library:
-
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
-
create new schemas
-
create temporary tables
-
Not connected
-
Connection details
-
General info
-
<warning> %s support not enabled!
-
<warning> This user has no privileges!
-
User has privileges:
-
Privileges
-
Owner:
-
Comment:
-
create new objects
-
access objects
-
Schema details
-
<warning> This user has no privileges to access this schema!
-
Relation type:
-
View
- Харагдалт
+
Table
- Хүснэгт
+
Rows:
-
Unknown (<a href="action:rows/count">find out</a>)
-
Name
- Нэр
+
Type
- Төрөл
+
Null
-
Default
- Өгөгдмөл
+
Column(s)
-
Function
-
<warning> This is not a spatial table.
-
Fields
- Талбар
+
Constraints
-
Indexes
-
Triggers
-
View definition
-
Column:
-
Geometry:
-
Dimension:
-
Undefined
-
Spatial ref:
-
Estimated extent:
-
(unknown) (<a href="action:extent/get">find out</a>)
-
Extent:
-
<warning> There isn't entry in geometry_columns!
-
<warning> No spatial index defined (<a href="action:spatialindex/create">create it</a>)
-
Pages:
-
Rows (estimation):
-
Privileges:
-
<warning> This user doesn't have usage privileges for this schema!
-
Rows (counted):
-
<warning> This user has read-only privileges.
-
<warning> There's a significant difference between estimated and real row count. Consider running <a href="action:vacuumanalyze/run">VACUUM ANALYZE</a>.
-
<warning> No primary key defined for this table!
-
Scripts:
-
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
-
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
-
Length
- Урт
+
Enabled
- Идэвхжлээ
+
Yes
- Тийм
+
No
- Үгүй
+
<a href="action:triggers/enable">Enable all triggers</a> / <a href="action:triggers/disable">Disable all triggers</a>
-
Definition
-
Rules
-
&Versioning
-
&Table
-
"{0}" not found
-
Filename:
-
SQLite version:
-
Error:
%s
-
Query:
%s
-
&Re-connect
-
&Database
- &Өгөгдлийн сан
+
&Create schema
-
&Schema
-
&Delete (empty) schema
-
Delete selected item
- Сонгосон объект хасах
+
&Create table
-
&Edit table
-
&Delete table/view
-
&Empty table
-
&Move to schema
-
Cannot delete the selected item.
-
No database selected or you are not connected to it.
-
New schema
-
Enter new schema name
-
Select an empty SCHEMA for deletion.
-
hey!
-
Really delete schema %s?
-
Select a TABLE for editation.
-
Select a TABLE/VIEW for deletion.
-
Really delete table/view %s?
-
Select a TABLE to empty it.
-
Really delete all items from table %s?
-
Select a TABLE/VIEW.
-
Do you want to %s all triggers?
-
Table triggers
-
Do you want to %s trigger %s?
-
Table trigger
-
Do you want to %s spatial index for field %s?
-
Spatial Index
- Оронзайн Индекс
+
Check
-
Primary key
-
Foreign key
-
Unique
-
Exclusion
-
Unknown
-
DBModel
Databases
-
Invalid layer
-
Unable to load the layer %s
-
DBTree
Rename
-
Delete
-
Add to canvas
-
Re-connect
-
@@ -677,27 +667,27 @@ Query:
Add geometry column
- Геометр багана нэмэх
Name
- Нэр
+ Нэр
Type
- Төрөл
+ Төрөл
Dimensions
- Хэмжээс
SRID
- SRID
+ SRID
@@ -705,22 +695,22 @@ Query:
Add constraint
-
Column
- Багана
Primary key
-
Unique
- Үл давтагдах
@@ -728,17 +718,17 @@ Query:
Create index
- Индекс үүсгэх
Column
- Багана
Name
- Нэр
+ Нэр
@@ -746,63 +736,63 @@ Query:
Create Table
- Хүснэгт Үүсгэх
Schema
- Бүдүүвч
+ Бүдүүвч
Name
- Нэр
+ Нэр
Add field
- Талбар нэмэх
Delete field
- Талбар устгах
Up
- Дээшээ
+ Дээшээ
Down
- Доошоо
+ Доошоо
Primary key
-
Create geometry column
- Геометр багана нэмэх
Dimensions
- Хэмжээс
SRID
- SRID
+ SRID
Create spatial index
- Оронзайн Индекс Үүсгэх
@@ -810,22 +800,22 @@ Query:
Database Error
- Өгөгдлийн сангийн алдаа
+ Өгөгдлийн сангийн алдаа
An error occured:
- Алдаа гарлаа:
An error occured when executing a query:
-
Query:
-
@@ -833,57 +823,57 @@ Query:
Export to vector file
-
Output file
- Гаралтын ажил
+
...
- ...
+ ...
Action
-
Create new file
- Шинэ ажил үүсгэх
Drop existing one
-
Append data to file
-
Options
- Сонголтууд
Source SRID
-
Target SRID
-
Encoding
-
@@ -891,32 +881,32 @@ Query:
Field properties
-
Name
- Нэр
+ Нэр
Type
- Төрөл
+ Төрөл
Can be NULL
-
Default value
- Өгөгдмөл утга
Length
- Урт
+ Урт
@@ -924,97 +914,97 @@ Query:
Import vector layer
-
Input
-
...
- ...
+ ...
Update options
-
Output table
- Гарах хүснэгт
+
Schema
- Бүдүүвч
+
Table
- Хүснэгт
+ Хүснэгт
Action
-
Create new table
-
Drop existing one
-
Append data to table
-
Options
-
Primary key
-
Geometry column
- Геометр багана
+
Source SRID
-
Target SRID
-
Encoding
-
Create single-part geometries instead of multi-part
-
Create spatial index
-
@@ -1022,99 +1012,99 @@ Query:
SQL window
- SQL цонх
SQL query:
-
Store
-
Delete
-
&Execute (F5)
-
F5
- F5
+ F5
&Clear
- &Цэвэрлэх
+
Result:
-
Load as new layer
-
Column with unique
integer values
-
Geometry column
- Геометр багана
+ Геометр багана
Retrieve
columns
-
Layer name (prefix)
-
Type
- Төрөл
+ Төрөл
Vector
- Вестор
+ Вектор
Raster
- Растер
+ Растер
Load now!
-
<html><head/><body><p>Avoid selecting feature by id. Sometimes - especially when running expensive queries/views - fetching the data sequentially instead of fetching features by id can be much quicker.</p></body></html>
-
Avoid selecting by feature id
-
@@ -1122,104 +1112,100 @@ columns
Table properties
-
Columns
- Багана
+
Table columns:
-
Add column
- Багана Нэмэх
+ Багана Нэмэх
Add geometry column
- Геометр багана нэмэх
Edit column
- Багана засварлах
Delete column
- Багана устгах
Constraints
-
Primary, foreign keys, unique and check constraints:
-
Add primary key / unique
-
Delete constraint
-
Indexes
- Индексүүд
Indexes defined for this table:
-
Add index
- Индекс нэмэх
Add spatial index
-
Delete index
- Индекс устгах
Dialog
-
- Connect
- Холбох
-
Eliminate sliver polygons
-
common boundary
-
Merge selection with the neighbouring polygon with the largest
-
Browse
Зам заах
+
+ Input vector layer
+ Вектор давхаргыг сонгох
+
+
+ Add result to canvas
+
Selected features:
-
area
- талбай
-
-
- Help
- Туслах
-
-
- Close
- Хаах
+ талбай
Input line or polygon vector layer
Шулуун/Олон өнцөгт вектор давхаргыг сонгох
-
- Save to new shapefile
-
-
- Tolerance
-
-
- Calculate using
-
-
- Calculate extent for each feature separately
-
Unique ID field
Үл давтагдах утгын талбар
+
+ Save to new shapefile
+
Цэгэн файлын гаргалт
- Geoprocessing
- Гео боловсруулалт
+ Tolerance
+
- Input vector layer
- Вектор давхаргыг сонгох
+ Calculate using
+
+
+ Calculate extent for each feature separately
+
+
+ Use only selected features
+ Зөвхөн сонгосон обьектуудыг хэрэглэ
+
+
+ Geoprocessing
+ Оронзайн боловсруулалт
Segments to approximate
-
Input unique ID field
-
Intersect line layer
-
Intersect unique ID field
-
Output Shapefile
Гаралтын shp файл
-
- Target vector layer
-
-
- Join vector layer
- Вектор давхарга нийлүүлэх
-
-
- Output table
- Гарах хүснэгт
-
-
- Only keep matching records
- Зөвхөн тохирсон бичлэгүүдийг харуулах
-
-
- Keep all records (including non-matching target records)
- Бүх бичлэгүүдийг харуулах (тохирохгүй бичлэгүүдийг оруулан)
-
Generate Centroids
Хүндийн төв бодуулах
-
- creating new selection
- Шинэ сонголт үүсгэх
-
-
- adding to current selection
- Одоогийн сонголт дээр нэмэх
-
-
- removing from current selection
- одоогийн сонголтоос хасах
-
-
- Select by location
- Байрлалаар нь сонголт хийх
-
-
- Select features in:
- дараах давхаргаас сонгох:
-
-
- that intersect features in:
- дараах давхаргатай огтлолцох:
-
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
-
- Modify current selection by:
- Одоогийн сонголтонд өөрчлөлт хйих:
-
-
- Use selected features only
- Зөвхөн сонгосон обьектийг ашиглах
-
-
- Please specify input layer
- Оролтын давхаргыг зааж өгнө үү
-
-
- Finished
-
-
- Processing completed.
- Боловсруулалт дууслаа.
-
-
- Please specify select layer
- Сонголт хийх давхаргыг зааж өгнө үү
-
-
- Incorrect field names
- Буруу талбарын нэр
-
-
- No output will be created.
-Following field names are longer than 10 characters:
-%1
- Файл үүсгэгдсэнгүй.
-Дараах талбарын нэрс 10 тэмдэгтээс урт байна:
-%1
-
-
- Error deleting shapefile
- Файлыг устгахад алдаа гарлаа
-
-
- Can't delete existing shapefile
-%1
- Байгаа shp файлыг усгах боломжгүй
-%1
-
-
- Sum line lengths
- Шулууны уртуудын нийлбэр
-
-
- Sum Line Lengths In Polyons
- Полигоны шулууны уртын нийлбэр
-
-
- Select directory with shapefiles to merge
- Нэгтэл хийх shapefile агуулсан хавтасыг сонго
-
-
- No shapefiles found
- Shapefile олдсонгүй
-
-
- There are no shapefiles in this directory. Please select another one.
- Энэ хавтсанд shapefile байхгүй байна. Өөр хавтасыг сонгоно уу.
-
-
- Delete error
- Алдааг устгах
-
-
- Can't delete file %1
- %1 файлыг устгах боломжгүй
-
-
- Cancel
- Цуцлах
-
-
- Merging
- Нэгтгэх
-
-
- Missing or invalid CRS
-
-
- Please specify input polygon vector layer
- Оролтын полигон давхаргыг зааж өгнө үү
-
-
- Please specify input line vector layer
- Оролтын шугаман давхаргыг зааж өгнө үү
-
-
- Please specify output length field
- Уртын мэдээлэл агуулсан гаралтын талбарыг заа
-
-
- length field
- Уртын талбар
-
-
- Random selection within subsets
-
-
- Select files to merge
- Нэгтгэх файлуудыг сонго
-
-
- Input files
- Оролтын файл
-
-
- No output file
- Гаралтын файл байхгүй байна
-
-
- Please specify output file.
- Гаралтын ажлыг зааж өгнө үү.
-
-
- There are no shapefiles with the given geometry type. Please select an available geometry type.
-
-
- Can't delete file %s
-
-
- Error loading output shapefile:
-%s
-
-
- Created output shapefile:
-%s
-
-Would you like to add the new layer to the TOC?
-
-
- Please specify input vector layer
- Оролтын вектор давхаргыг зааж өгнө үү
-
-
- Please specify an input field
- Оролтын талбарыг зааж өгнө үү
-
-
- Defined Projection For:
-%s.shp
-
-
- Random Points
- Санамсаргүй цэгүүд
-
-
- unstratified
- үе давхраагүй
-
-
- stratified
- үелэсэн
-
-
- density
- Нягтрал
-
-
- field
- талбар
-
-
- Unknown layer type...
- Үл мэдэгдэх давхаргын төрөл...
-
-
- Created output shapefiles in folder:
-%s
-
Weight field
@@ -1670,12 +1417,44 @@ Would you like to add the new layer to the TOC?
Стд. Хаз.
- Regular points
- Энгийн цэгүүд
+ Merge shapefiles
+
- Please properly specify extent coordinates
- Select by layers in the folder
+
+
+ Shapefile type
+
+
+ Polygon
+ Олонталт
+
+
+ Line
+ Шулуун
+
+
+ Point
+ Цэг
+
+
+ Input directory
+ Оролтын ажлын хавтас
+
+
+ Add result to map canvas
+
Target point layer
-
Target unique ID field
-
Use only the nearest (k) target points
-
Output distance matrix
Гаралтын зайн матриц
-
- Use only selected features
- Зөвхөн сонгосон обьектуудыг хэрэглэ
-
-
- Line intersections
- Шулууны огтолцол
-
-
- Please specify input line layer
- Оролтын шугаман давхаргыг зааж өгнө үү
-
-
- Please specify output shapefile
- Гаралтын ажлыг зааж өгнө үү
-
-
- Please specify line intersect layer
-
-
- Please specify input unique ID field
-
-
- Please specify intersect unique ID field
-
-
- Export to new projection
- Шинэ тусгаг руу гаргах
-
-
- No input layer specified
- Оролтын давхаргыг заагаагүй байна
-
-
- Define current projection
-
-
- Please specify spatial reference system
-
-
- No Valid CRS selected
-
-
- Output spatial reference system is not valid
-
-
- Please specify target vector layer
-
-
- Please specify join vector layer
-
-
- Mean coordinates
- Дундаж солбицол
-
-
- Standard distance
- Стандарт зай
-
-
- (Optional) Weight field
- (Дурын) Жингийн талбар
-
-
- (Optional) Unique ID field
- (Дурын) Үл давтагдах утгын талбар
-
-
- Coordinate statistics
-
-
- No input vector layer specified
- Вектор давхаргыг зааж өгөөгүй байна
-
-
- Eliminate
-
-
- No selection in input layer
-
-
- Error creating output file
-
-
- Could not delete features
-
-
- Could not add features
-
-
- Join attributes by location
- Байрлалаар нь хүснэгтүүдийг нэгтгэх
-
-
- Please specify at least one summary statistic
-
-
- CRS warning!
- CRS анхааруулга!
-
-
- Warning: Input layers have non-matching CRS.
-This may cause unexpected results.
-
-
- Selected features: %s
-
-
- Commit error:
-%s
-
-
- Could not replace geometry of feature with id %s
-
-
- Could not eliminate features with these ids:
-%s
-
-
- Created output shapefile:
-%s
-
-
- Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
-
- There were %d vertices in original dataset which
-were reduced to %d vertices after simplification
-
-
- Processing of the following layers/files ended with error:<br><br>
-
-
- Summary field
-
-
- Can't delete existing shapefile
-%s
-
-
- Vector grid
- Вестор тор
-
-
- Please specify valid extent coordinates
-
-
- Invalid extent coordinates entered
-
-
- Generate Vector Grid
- Вектор тор үүсгэх
-
Count Points In Polygons
@@ -1934,23 +1525,23 @@ were reduced to %d vertices after simplification
Output count field name
-
PNTCNT
-
Generate Random Points
-
Input Boundary Layer
-
Unstratified Sampling Design (Entire layer)
-
Use this number of points
-
Stratified Sampling Design (Individual polygons)
-
Use this density of points
-
Use value from input field
-
-
- No input shapefile specified
-
-
- Cannot define projection for PostGIS data...yet!
-
-
- Identical output spatial reference system chosen
-
-Are you sure you want to proceed?
-
-
- Please select the projection system that defines the current layer.
-
-
- Layer CRS information will be updated to the selected CRS.
-
-
- Split vector layer
-
-
- Random selection
- Тохиолдлын сонголт
+
Random Selection Tool
Тохиолдлын монголтын хэрэгсэл
-
- Count Points in Polygon
- Полигон доторх цэг тоолох
-
-
- Count Points In Polygon
- Полигон доторх цэг тоолох
-
-
- Please specify input point vector layer
-
-
- Please specify output count field
-
-
- Please select a raster layer
-
-
- Unable to compute extents aligned on selected raster layer
-
-
- Densify geometries
-
-
- Vertices to add
-
-
- Warning
- Анхааруулга
-
-
- Please specify an input layer
-
-
- Simplify results
-
-
- Error
- Алдаа
-
-
- Distance matrix
- Зайн матриц
-
-
- Create Point Distance Matrix
-
-
- Please specify input point layer
-
-
- Please specify output file
- Гаралтын ажлыг зааж өгнө үү
-
-
- Please specify target point layer
-
-
- Please specify target unique ID field
-
-
- Created output matrix:
-
-
Randomly Select
-
Number of Features
-
Percentage of Features
-
Projection Management Tool
-
Input spatial reference system
-
Output spatial reference system
-
Use predefined spatial reference system
-
Import spatial reference system from existing layer
-
Import spatial reference system
-
Generate Regular Points
-
Use this point spacing
-
Apply random offset to point spacing
-
Initial inset from corner (LH side)
-
+
+ Simplify geometries
+
+
+ Input line or polygon layer
+
+
+ Simplify tolerance
+
+
+ Save to new file
+ Шинээр хадгалах
+
+
+ Build spatial index
+
+
+ Select files from disk
+
+
+ Select files...
+
+
+ Select all
+
+
+ Select none
+
+
+ Clear list
+
Spatial Join
-
+
+ Target vector layer
+
+
+ Join vector layer
+ Вектор давхарга нийлүүлэх
Attribute Summary
-
-
- Take attributes of first located feature
-
-
- Take summary of intersecting features
-
Mean
Дундаж
+
+ Take summary of intersecting features
+
Min
ХБ
-
- Max
- ХИ
-
Sum
@@ -2266,15 +1800,40 @@ Are you sure you want to proceed?
Median
Голын утга
+
+ Max
+ ХИ
+
+
+ Take attributes of first located feature
+
+
+ Output table
+ Гарах хүснэгт
+
+
+ Only keep matching records
+ Зөвхөн тохирсон бичлэгүүдийг харуулах
+
+
+ Keep all records (including non-matching target records)
+ Бүх бичлэгүүдийг харуулах (тохирохгүй бичлэгүүдийг оруулан)
+
Random Selection From Within Subsets
-
Input subset field (unique ID field)
-
Output summed length field name
-
Input line vector layer
Оролтын шулуун давхарга
+
+ Generate Vector Grid
+ Вектор тор үүсгэх
+
Grid extent
-
Update extents from layer
-
Update extents from canvas
-
Align extents and resolution to selected raster layer
-
Output grid as polygons
-
Output grid as lines
-
Vector Split
-
Target field
-
Save errors location
-
Ctrl+C дарж үр дүнг санах ойд хуулна уу
- Merge shapefiles
- Vector grid
+ Вестор тор
- Select by layers in the folder
- Please select a raster layer
+
- Shapefile type
- Unable to compute extents aligned on selected raster layer
+
- Polygon
- Олонталт
+ Please specify valid extent coordinates
+
- Line
- Шулуун
+ Please specify output shapefile
+ Гаралтын ажлыг зааж өгнө үү
- Point
- Цэг
+ Invalid extent coordinates entered
+
- Input directory
- Оролтын ажлын хавтас
+ Random selection
+ Тохиолдлын сонголт
- Add result to map canvas
- No input shapefile specified
+
- Simplify geometries
- Regular points
+ Энгийн цэгүүд
- Input line or polygon layer
- Please specify input layer
+ Оролтын давхаргыг зааж өгнө үү
- Simplify tolerance
- Please properly specify extent coordinates
+
- Save to new file
- Шинээр хадгалах
+ Mean coordinates
+ Дундаж солбицол
- Add result to canvas
- Standard distance
+ Стандарт зай
- Build spatial index
- (Optional) Weight field
+ (Дурын) Жингийн талбар
- Select files from disk
- (Optional) Unique ID field
+ (Дурын) Үл давтагдах утгын талбар
- Select files...
- Coordinate statistics
+
- Select all
- No input vector layer specified
+ Вектор давхаргыг зааж өгөөгүй байна
- Select none
- There were %d vertices in original dataset which
+were reduced to %d vertices after simplification
+
- Clear list
-
-
-
- DlgAbout
-
- Dialog
- Харилцах цонх
+ Processing of the following layers/files ended with error:<br><br>
+
- about:blank
- тухай:хоосон
+ Join attributes by location
+ Байрлалаар нь хүснэгтүүдийг нэгтгэх
+
+
+ Please specify target vector layer
+
+
+ Please specify join vector layer
+
+
+ Please specify at least one summary statistic
+
+
+ CRS warning!
+ CRS анхааруулга!
+
+
+ Warning: Input layers have non-matching CRS.
+This may cause unexpected results.
+
+
+ Summary field
+
+
+ Error deleting shapefile
+ Файлыг устгахад алдаа гарлаа
+
+
+ Sum line lengths
+ Шулууны уртуудын нийлбэр
+
+
+ Sum Line Lengths In Polyons
+ Полигоны шулууны уртын нийлбэр
+
+
+ Please specify input polygon vector layer
+ Оролтын полигон давхаргыг зааж өгнө үү
+
+
+ Please specify input line vector layer
+ Оролтын шугаман давхаргыг зааж өгнө үү
+
+
+ Please specify output length field
+ Уртын мэдээлэл агуулсан гаралтын талбарыг заа
+
+
+ length field
+ Уртын талбар
+
+
+ Can't delete existing shapefile
+%s
+
+
+ Split vector layer
+
+
+ Cancel
+ Цуцлах
+
+
+ Close
+ Хаах
+
+
+ Count Points in Polygon
+ Полигон доторх цэг тоолох
+
+
+ Count Points In Polygon
+ Полигон доторх цэг тоолох
+
+
+ Please specify input point vector layer
+
+
+ Please specify output count field
+
+
+ Random selection within subsets
+
+
+ Can't delete file %s
+
+
+ Error loading output shapefile:
+%s
+
+
+ Created output shapefile:
+%s
+
+Would you like to add the new layer to the TOC?
+
+
+ Please specify input vector layer
+ Оролтын вектор давхаргыг зааж өгнө үү
+
+
+ Please specify an input field
+ Оролтын талбарыг зааж өгнө үү
+
+
+ Defined Projection For:
+%s.shp
+
+
+ Random Points
+ Санамсаргүй цэгүүд
+
+
+ No input layer specified
+ Оролтын давхаргыг заагаагүй байна
+
+
+ unstratified
+ үе давхраагүй
+
+
+ stratified
+ үелэсэн
+
+
+ density
+ Нягтрал
+
+
+ field
+ талбар
+
+
+ Unknown layer type...
+ Үл мэдэгдэх давхаргын төрөл...
+
+
+ Selected features: %s
+
+
+ Commit error:
+%s
+
+
+ Could not replace geometry of feature with id %s
+
+
+ Could not eliminate features with these ids:
+%s
+
+
+ Created output shapefile:
+%s
+
+
+ Line intersections
+ Шулууны огтолцол
+
+
+ Please specify input line layer
+ Оролтын шугаман давхаргыг зааж өгнө үү
+
+
+ Please specify line intersect layer
+
+
+ Created output shapefiles in folder:
+%s
+
+
+ Please specify input unique ID field
+
+
+ Please specify intersect unique ID field
+
+
+ Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
+
+
+ Distance matrix
+ Зайн матриц
+
+
+ Create Point Distance Matrix
+
+
+ Please specify input point layer
+
+
+ Please specify output file
+ Гаралтын ажлыг зааж өгнө үү
+
+
+ Please specify target point layer
+
+
+ Please specify target unique ID field
+
+
+ Created output matrix:
+
+
+
+ Finished
+
+
+ Processing completed.
+
+
+ Select directory with shapefiles to merge
+ Нэгтэл хийх shapefile агуулсан хавтасыг сонго
+
+
+ No shapefiles found
+ Shapefile олдсонгүй
+
+
+ There are no shapefiles in this directory. Please select another one.
+ Энэ хавтсанд shapefile байхгүй байна. Өөр хавтасыг сонгоно уу.
+
+
+ Input files
+ Оролтын файл
+
+
+ No output file
+ Гаралтын файл байхгүй байна
+
+
+ Please specify output file.
+ Гаралтын ажлыг зааж өгнө үү.
+
+
+ There are no shapefiles with the given geometry type. Please select an available geometry type.
+
+
+ Delete error
+ Алдааг устгах
+
+
+ Merging
+ Нэгтгэх
+
+
+ Define current projection
+
+
+ Missing or invalid CRS
+
+
+ Please specify spatial reference system
+
+
+ Cannot define projection for PostGIS data...yet!
+
+
+ Identical output spatial reference system chosen
+
+Are you sure you want to proceed?
+
+
+ Output spatial reference system is not valid
+
+
+ Please select the projection system that defines the current layer.
+
+
+ Layer CRS information will be updated to the selected CRS.
+
+
+ Export to new projection
+ Шинэ тусгаг руу гаргах
+
+
+ No Valid CRS selected
+
+
+ Densify geometries
+
+
+ Vertices to add
+
+
+ Warning
+
+
+ Please specify an input layer
+
+
+ Simplify results
+
+
+ Error
+
+
+ creating new selection
+ Шинэ сонголт үүсгэх
+
+
+ adding to current selection
+ Одоогийн сонголт дээр нэмэх
+
+
+ removing from current selection
+ одоогийн сонголтоос хасах
+
+
+ Select by location
+ Байрлалаар нь сонголт хийх
+
+
+ Select features in:
+ дараах давхаргаас сонгох:
+
+
+ that intersect features in:
+ дараах давхаргатай огтлолцох:
+
+
+ Modify current selection by:
+ Одоогийн сонголтонд өөрчлөлт хйих:
+
+
+ Use selected features only
+ Зөвхөн сонгосон обьектийг ашиглах
+
+
+ Please specify select layer
+ Сонголт хийх давхаргыг зааж өгнө үү
+
+
+ Eliminate
+
+
+ No selection in input layer
+
+
+ Error creating output file
+
+
+ Could not delete features
+
+
+ Could not add features
+
DlgAddGeometryColumn
-
- Dialog
- Харилцах цонх
-
-
- Name
- Нэр
-
-
- Type
- Төрөл
-
-
- SRID
- SRID
-
Sorry
-
field name must not be empty
-
@@ -2536,32 +2442,32 @@ Are you sure you want to proceed?
Autofill settings
-
Autofill mode
-
Do not autofill
-
Fill with numbers
-
Fill with parameter values
-
Parameter to use
-
@@ -2569,172 +2475,125 @@ Are you sure you want to proceed?
Processing options
-
Enter setting name to filter list
-
-
- Value
- Утга
+
DlgCreateIndex
-
- Name
- Нэр
-
Error
- Алдаа
+
Please enter some name for the index
-
DlgCreateTable
-
- Schema
- Бүдүүвч
-
-
- Name
- Нэр
-
-
- Up
- Дээшээ
-
-
- Down
- Доошоо
-
-
- SRID
- SRID
-
&Create
-
Sorry
-
no field selected
-
field is at top already
-
No field selected
-
field is at bottom already
-
select schema!
-
enter table name!
-
add some fields!
-
set geometry column name
-
Good
-
everything went fine
-
-
-
- DlgDbError
-
- Database Error
- Өгөгдлийн сангийн алдаа
+
DlgExportVector
Choose where to save the file
-
Shapefiles
-
Export to file
- Гаргах
+
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
%s
-
Export finished.
-
DlgFieldProperties
-
- Name
- Нэр
-
-
- Type
- Төрөл
-
-
- Length
- Урт
-
Sorry
-
field name must not be empty
-
field type must not be empty
-
@@ -2742,12 +2601,12 @@ Are you sure you want to proceed?
Get scripts and models
-
about:blank
- тухай:хоосон
+
@@ -2755,22 +2614,22 @@ Are you sure you want to proceed?
Help editor
-
about:blank
- тухай:хоосон
+
Select element to edit
-
Element description
-
@@ -2778,55 +2637,43 @@ Are you sure you want to proceed?
History and log
-
DlgImportVector
-
- Schema:
- Бүдүүвч:
-
-
- Geometry column:
- Геометрийн багана:
-
-
- Encoding:
- Коодлох:
-
Choose the file to import
-
Import to database
-
Input layer missing or not valid
-
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
%s
-
Import was successful.
-
@@ -2834,12 +2681,12 @@ Are you sure you want to proceed?
Processing modeler
-
Open model
-
...
- ...
+
Save
- Хадгалах
+
Save as...
- Өөрөөр хадгалах...
+
Export as image
-
Edit model help
-
Run model
-
Inputs
-
Algorithms
-
Enter algorithm name to filter list
-
Enter model name here
-
Enter group name here
-
@@ -2907,7 +2754,7 @@ Are you sure you want to proceed?
Multiple selection
-
@@ -2915,17 +2762,17 @@ Are you sure you want to proceed?
Enter number or expression
-
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -2933,17 +2780,17 @@ Are you sure you want to proceed?
Dialog
- Харилцах цонх
+
Output
- Гаралт
+
Style
- Загвар
+
@@ -2951,12 +2798,12 @@ Are you sure you want to proceed?
Results
-
about:blank
- тухай:хоосон
+
@@ -2964,12 +2811,12 @@ Are you sure you want to proceed?
Script editor
-
Save
- Хадгалах
+
...
- ...
+
Save as...
- Өөрөөр хадгалах...
+
Edit script help
-
Run algorithm
-
Cut
-
Copy
- Хуулах
+
Paste
-
Undo
-
Redo
- Дахих
+
DlgSqlWindow
-
- F5
- F5
-
-
- &Clear
- &Цэвэрлэх
-
-
- Geometry column
- Геометр багана
-
-
- Type
- Төрөл
-
-
- Vector
- Вестор
-
-
- Raster
- Растер
-
%d rows, %.1f seconds
-
Sorry
-
You must fill the required fields:
geometry column - column with unique integer values
-
-
-
- DlgSymbolV2Properties
-
- Symbol properties
- Таних тэмдэгийн шинж чанар
-
-
- Symbol preview
- Өөрчлөлтийг харах
-
-
- Lock layer's color
- Давхаргын өнгийг түгжих
-
-
- Move up
- Дээш шилжүүлэх
-
-
- Move down
- Доош шилжүүлэх
+
DlgTableProperties
-
- Columns
- Багана
-
-
- Add column
- Багана Нэмэх
-
Sorry
-
nothing selected
-
Are you sure
-
really delete column '%s'?
-
really delete constraint '%s'?
-
The selected table has no geometry
-
Create?
-
Create spatial index for field %s?
-
Nothing selected
-
really delete index '%s'?
-
@@ -3144,67 +2936,67 @@ geometry column - column with unique integer values
Add versioning support to a table
-
Table is expected to be empty, with a primary key.
-
Schema
- Бүдүүвч
+
Table
- Хүснэгт
+
create a view with current content (<TABLE>_current)
-
New columns
-
Prim. key
-
id_hist
-
Start time
-
time_start
-
End time
-
time_end
-
SQL to be executed:
-
@@ -3212,118 +3004,136 @@ geometry column - column with unique integer values
Field calculator
-
Create a new field
-
Output field name
- Гаргах талбарын нэр
+
Output field type
- Гаргах Талбарын төрөл
+
Output field width
- Гаргах талбарын өргөн
+
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
- Нарийвчлал
+
Input layer
- Оролтын Давхагра
+
Update existing field
- Одоогийн талбарыг шинэчлэх
+
Output file
- Гаралтын ажил
+
...
- ...
+
FieldsCalculatorDialog
[Save to temporary file]
-
Save file
- Ажлыг хадгалах
+
Unable to execute algorithm
-
Wrong or missing parameter values
-
FileDirectorySelector
...
- ...
+
Select directory
-
Select file
-
All files (*.*)
-
GdalTools
+
+ &Input directory
+ &Оролтын хавтас
+
+
+ &Output directory
+ &Гаралтын хавтас
+
+
+ The selected file is not a supported OGR format
+
The process failed to start. Either the invoked program is missing, or you may have insufficient permissions to invoke the program.
-
The process crashed some time after starting successfully.
-
An unknown error occurred.
Үл мэдэгдэх алдаa гарлаа.
- The selected file is not a supported OGR format
- Plugin error
+
- Quantum GIS version detected:
- Quantum GIS-ийн хувилбар илэрлээ:
+ Unable to load {0} plugin.
+The required "{1}" module is missing.
+Install it and try again.
+
+
+ QGIS version detected:
+
This version of Gdal Tools requires at least QGIS version 1.0.0
@@ -3332,8 +3142,80 @@ Plugin will not be enabled.
Хэрэгсэл идэвхжихгүй.
- Builds a VRT from a list of datasets
- Projections
+ Түсгагууд
+
+
+ Warp (Reproject)
+
+
+ Warp an image into a new coordinate system
+
+
+ Assign projection
+
+
+ Add projection info to the raster
+
+
+ Extract projection
+
+
+ Extract projection information from raster(s)
+
+
+ Conversion
+ Хөрвүүлэлт
+
+
+ Rasterize (Vector to raster)
+
+
+ Burns vector geometries into a raster
+
+
+ Polygonize (Raster to vector)
+
+
+ Produces a polygon feature layer from a raster
+ Растераас полигон давхарга үүсгэ
+
+
+ Translate (Convert format)
+
+
+ Converts raster data between different formats
+
+
+ RGB to PCT
+ RGB-ээс PCT
+
+
+ Convert a 24bit RGB image to 8bit paletted
+
+
+ PCT to RGB
+ PCT-ээс RGB рүү
+
+
+ Convert an 8bit paletted image to 24bit RGB
+
+
+ Extraction
+
Contour
@@ -3343,183 +3225,53 @@ Plugin will not be enabled.
Builds vector contour lines from a DEM
DEM-ээс вектор хаялбарын шугам үүсгэ
-
- Burns vector geometries into a raster
-
-
- Unable to load {0} plugin.
-The required "{1}" module is missing.
-Install it and try again.
-
-
- Produces a polygon feature layer from a raster
- Растераас полигон давхарга үүсгэ
-
-
- Merge
- Нэгтгэх
-
-
- Build a quick mosaic from a set of images
-
-
- Sieve
-
-
- Removes small raster polygons
-
-
- Produces a raster proximity map
-
-
- Near black
-
-
- Convert nearly black/white borders to exact value
-
-
- Warp an image into a new coordinate system
-
-
- Create raster from the scattered data
-
-
- Converts raster data between different formats
-
-
- Information
- Мэдээлэл
-
-
- Lists information about raster dataset
-
-
- Assign projection
-
-
- Add projection info to the raster
-
-
- Build Virtual Raster (Catalog)
-
-
- Rasterize (Vector to raster)
-
-
- Polygonize (Raster to vector)
-
-
- Proximity (Raster distance)
-
-
- Warp (Reproject)
-
-
- Grid (Interpolation)
-
-
- Translate (Convert format)
-
-
- Build overviews (Pyramids)
-
-
- Builds or rebuilds overview images
-
Clipper
-
-
- Plugin error
-
-
- QGIS version detected:
-
-
- Projections
- Түсгагууд
-
-
- Extract projection
-
-
- Extract projection information from raster(s)
-
-
- Conversion
- Хөрвүүлэлт
-
-
- RGB to PCT
- RGB-ээс PCT
-
-
- Convert a 24bit RGB image to 8bit paletted
-
-
- PCT to RGB
- PCT-ээс RGB рүү
-
-
- Convert an 8bit paletted image to 24bit RGB
-
-
- Extraction
-
Analysis
Дун шинжилгээ
+
+ Sieve
+
+
+ Removes small raster polygons
+
+
+ Near black
+
+
+ Convert nearly black/white borders to exact value
+
Fill nodata
-
Fill raster regions by interpolation from edges
-
- Miscellaneous
- Бусад
+ Proximity (Raster distance)
+
- Tile index
- Produces a raster proximity map
+
- Build a shapefile as a raster tileindex
- Grid (Interpolation)
+
+
+ Create raster from the scattered data
+
DEM (Terrain models)
@@ -3527,7 +3279,51 @@ Install it and try again.
Tool to analyze and visualize DEMs
- DEM-ийг
+
+
+ Miscellaneous
+ Бусад
+
+
+ Build Virtual Raster (Catalog)
+
+
+ Builds a VRT from a list of datasets
+
+
+ Merge
+ Нэгтгэх
+
+
+ Build a quick mosaic from a set of images
+
+
+ Information
+ Мэдээлэл
+
+
+ Lists information about raster dataset
+
+
+ Build overviews (Pyramids)
+
+
+ Builds or rebuilds overview images
+
+
+ Tile index
+
+
+ Build a shapefile as a raster tileindex
+
GdalTools settings
@@ -3537,22 +3333,6 @@ Install it and try again.
Various settings for Gdal Tools
Gdal хэрэгслийн төрөл бүрийн тохиргоо
-
- About GdalTools
- Gdal хэрэгслийн тухай
-
-
- Displays information about Gdal Tools
- Gdal хэрэгслийн тухай мэдээллийг дэлгэцэнд
-
-
- &Input directory
- &Оролтын хавтас
-
-
- &Output directory
- &Гаралтын хавтас
-
GdalToolsAboutDialog
@@ -3576,9 +3356,9 @@ Install it and try again.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
-
Close
Хаах
-
-
-(using GDAL v. %1)
- (GDAL v. %1-ийг ашиглаж байна)
-
GdalToolsBaseBatchWidget
@@ -3612,18 +3387,12 @@ p, li { white-space: pre-wrap; }
No input files to process.
-
The following files were not created:
{0}
-
-
- The following files were not created:
-%1
- Дараах файлууд үүссэнгүй:
-%1
+
@@ -3638,10 +3407,6 @@ Do you want terminate it anyway?
Команд уншигдаж байна.
тэгсэн ч командыг зогсоох уу?
-
- Invalid parameters.
- Хүчингүй параметрүүд байна.
-
GdalToolsBasePluginWidget
@@ -3663,11 +3428,7 @@ Do you want terminate it anyway?
%s not created.
-
-
- %1 not created.
- %1 үүссэнгүй.
+
@@ -3680,195 +3441,144 @@ Do you want terminate it anyway?
&Load into canvas when finished
-
Edit
-
Reset
-
- Select the input file for Proximity
- Extract projection
+
- Select the raster file to save the results to
- Batch mode (for processing whole directory)
+
- Select the input file for Near Black
- &Input file
+
- Select the input file for Grid
- Recurse subdirectories
+
- Warning
- Анхааруулга
-
-
- Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
-
-
- Select the file to analyse
-
-
- Select the mask file
-
-
- Select the input directory with files for convert
-
-
- Output size or resolution required
-
-
- The output file doesn't exist. You must set up the output size or resolution to create it.
-
-
- Select the input directory with files to Assign projection
-
-
- Finished
-
-
- Processing completed.
- Боловсруулалт дууслаа.
-
-
- %1 not created.
- %1 үүссэнгүй.
-
-
- Assign projection
-
-
- This raster already found in map canvas
-
-
- Select the files for VRT
-
-
- Select where to save the VRT
-
-
- VRT (*.vrt)
- VRT (*.vrt)
-
-
- Select the input file for Warp
-
-
- Select the input directory with files to Warp
-
-
- Select the output directory to save the results to
-
-
- Select the input file for Sieve
-
-
- Select the files to Merge
-
-
- Select where to save the Merge output
-
-
- Select the input file for convert
- Create also prj file
+
Select the file for DEM
ӨТЗ ажлыг сонго
+
+ Select the raster file to save the results to
+
Select the color configuration file
Өнгөний тохиргоо хийх ажлыг сонго
- Select the input file for Polygonize
-
-
- Select where to save the Polygonize output
-
-
- Select the input file for Contour
-
-
- Select where to save the Contour output
-
-
- Select the input file for Translate
-
-
- {0} not created.
-
-
- Select the input directory with files to Translate
-
-
- Translate - srcwin
-
-
- Image coordinates (pixels) must be integer numbers.
-
-
- Translate - prjwin
-
-
- Image coordinates (geographic) must be numbers.
-
-
- Select the files to analyse
-
-
- Select the input directory with files to Merge
-
-
- Convert paletted image to RGB
- Select the input file for Grid
+
Select the input file for Rasterize
-
+
+ Select the input file for Sieve
+
+
+ Select the input file for Warp
+
+
+ Select the mask file
+
+
+ Select the input directory with files to Warp
+
+
+ Select the output directory to save the results to
+
+
+ Output size or resolution required
+
+
+ The output file doesn't exist. You must set up the output size or resolution to create it.
+
+
+ Select the input file for Translate
+
+
+ Select the input directory with files to Translate
+
+
+ Translate - srcwin
+
+
+ Image coordinates (pixels) must be integer numbers.
+
+
+ Translate - prjwin
+
+
+ Image coordinates (geographic) must be numbers.
+
+
+ Select the input directory with raster files
+
+
+ Select where to save the TileIndex output
+
+
+ Convert paletted image to RGB
+
+
+ Select the input file for convert
+
+
+ Select the input directory with files for convert
+
+
+ Select the file to analyse
+
+
+ Select the input directory with files to Assign projection
+
Copy
@@ -3878,68 +3588,115 @@ Do you want terminate it anyway?
Copy all
Бүгдийг хуулах
+
+ Select the input file for Polygonize
+
+
+ Select the files for VRT
+
+
+ Select where to save the VRT
+
+
+ VRT (*.vrt)
+ VRT (*.vrt)
+
Select the input directory with files for VRT
-
- Select the input directory with raster files
- Select the input file for Near Black
+
- Select where to save the TileIndex output
- Select the input file
+
+
+ Select the input directory with files
+
+
+ Select the files to Merge
+
Error retrieving the extent
-
GDAL was unable to retrieve the extent from any file.
The "Use intersected extent" option will be unchecked.
-
Empty extent
-
The computed extent is empty.
Disable the "Use intersected extent" option to have a nonempty output.
-
- Select the input file
- Select where to save the Merge output
+
- Select the input directory with files
- Select the input directory with files to Merge
+
- Extract projection
- {0} not created.
+
- Batch mode (for processing whole directory)
- Select the files to analyse
+
- &Input file
- Select the input file for Contour
+
- Recurse subdirectories
- Select where to save the Contour output
+
- Create also prj file
- Select the input file for Proximity
+
+
+ Warning
+ Анхааруулга
+
+
+ Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
+
+
+ Finished
+
+
+ Processing completed.
+
+
+ Assign projection
+
+
+ This raster already found in map canvas
+
+
+ Select where to save the Polygonize output
+
@@ -3947,12 +3704,12 @@ Disable the "Use intersected extent" option to have a nonempty output.
Select the extent by drag on canvas
-
or change the extent coordinates
-
Path to the GDAL executables
-
Path to the GDAL python modules
-
GDAL driver path
- GDAL driver path
+
A list of colon-separated (Linux and MacOS) or
@@ -4061,25 +3818,25 @@ and python executables.
MacOS users usually need to set it to something like
/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to python modules.
-
Useful to open local GDAL documentation instead of online help
when pressing on the tool dialog's Help button.
-
Select directory with GDAL executables
-
Select directory with GDAL python modules
-
Select directory with the GDAL documentation
@@ -4088,35 +3845,35 @@ when pressing on the tool dialog's Help button.
GdalToolsWidget
-
- Select...
- Сонгох...
-
-
- &Input files
-
Build Virtual Raster (Catalog)
-
Use visible raster layers for input
-
Choose input directory instead of files
-
+
+ &Input files
+
+
+ Recurse subdirectories
+
&Output file
-
&Resolution
-
Highest
-
Average
- Дундаж
+
Lowest
-
&Source No Data
-
Allow projection difference
-
Clipper
-
&No data value
-
+
+ &Input file (raster)
+
Clipping mode
-
Extent
- Өргөтгөл
+
Mask layer
-
Create an output alpha band
-
-
- 1
- 1
-
-
- 2
- 2
-
-
- Grab pseudocolor table from the first image
-
Contour
Хаялбар
-
- &Input file (raster)
-
-
- &Output directory for contour lines (shapefile)
-
&Output file for contour lines (vector)
-
I&nterval between contour lines
-
&Attribute name
-
If not provided, no elevation attribute is attached.
-
ELEV
-
Convert RGB image to paletted
-
Batch mode (for processing whole directory)
-
&Input file
-
Number of colors
-
Band to convert
-
+
+ DEM (Terrain models)
+
+
+ &Input file (DEM raster)
+
+
+ &Band
+
+
+ Compute &edges
+
+
+ Use Zevenbergen&&Thorne formula (instead of the Horn's one)
+
+
+ &Mode
+
+
+ Hillshade
+
+
+ Slope
+
+
+ Aspect
+
+
+ Color relief
+
+
+ TRI (Terrain Ruggedness Index)
+
+
+ TPI (Topographic Position Index)
+
+
+ Roughness
+
+
+ Mode Options
+
+
+ Z factor (vertical exaggeration)
+
+
+ Scale (ratio of vert. units to horiz.)
+
+
+ Azimuth of the light
+
+
+ Altitude of the light
+
+
+ Slope expressed as percent (instead of as degrees)
+
+
+ Return trigonometric angle (instead of azimuth)
+
+
+ Return 0 for flat (instead of -9999)
+
+
+ Color configuration file
+
+
+ Matching mode
+
+
+ Exact color (otherwise "0,0,0,0" RGBA)
+
+
+ Nearest color
+
+
+ Add alpha channel
+
+
+ &Creation Options
+
+
+ Fill Nodata
+
+
+ &Input Layer
+
+
+ Output format
+
+
+ Search distance
+
+
+ Smooth iterations
+
+
+ Band to operate on
+
+
+ Validity mask
+
+
+ Do not use the default validity mask
+
+
+ Grid (Interpolation)
+
Inverse distance to a power
-
Moving average
-
Nearest neighbor
-
Data metrics
-
Power
-
Smoothing
-
Radius2
Радиус2
+
+ Max points
+
+
+ Min points
+
Angle
Өнцөг
+
+ No data
+
+
+ Metrics
+
+
+ Minimum
+ Хамгийн бага
+
+
+ Maximum
+ Хамгийн их
+
+
+ Range
+
+
+ Resize
+
Height
Өндөр
-
- Max points
-
-
- Grid (Interpolation)
-
-
- Min points
-
-
- No data
-
-
- Metrics
-
-
- Minimum
- Хамгийн бага
-
-
- Maximum
- Хамгийн их
-
-
- Range
- Цараа
-
Info
- Мэдээ
+
Raster info
-
Suppress GCP printing
-
Suppress metadata printing
-
Layer stack
-
Use intersected extent
-
- DEM (Terrain models)
- DEM (Гадаргуун Загвар)
-
-
- &Input file (DEM raster)
-
-
- &Band
-
-
- Compute &edges
-
-
- &Mode
-
-
- Hillshade
-
-
- Slope
-
-
- Aspect
-
-
- Color relief
-
-
- TRI (Terrain Ruggedness Index)
-
-
- TPI (Topographic Position Index)
-
-
- Roughness
-
-
- Use Zevenbergen&&Thorne formula (instead of the Horn's one)
-
-
- Mode Options
-
-
- Z factor (vertical exaggeration)
-
-
- Scale (ratio of vert. units to horiz.)
-
-
- Azimuth of the light
-
-
- Altitude of the light
-
-
- Slope expressed as percent (instead of as degrees)
-
-
- Return trigonometric angle (instead of azimuth)
-
-
- Return 0 for flat (instead of -9999)
-
-
- Color configuration file
-
-
- Matching mode
-
-
- Exact color (otherwise "0,0,0,0" RGBA)
-
-
- Nearest color
-
-
- Add alpha channel
-
-
- &Creation Options
- Grab pseudocolor table from the first image
+
Near Black
-
How &far from black (or white)
-
Search for nearly &white (255) pixels instead of black ones
-
Build overviews (Pyramids)
-
-
- nearest
- хамгийн ойр
-
-
- average
- дундаж
-
-
- gauss
- гаусс
+
Remove all overviews.
-
Clean
-
-
- JPEG Quality (1-100)
- JPEG Чанар (1-100)
+
Polygonize (Raster to vector)
-
&Output file for polygons (shapefile)
-
&Field name
-
DN
-
Use mask
-
Assign projection
-
WARNING: current projection definition will be cleared
-
Desired SRS
-
Output will be:
- new GeoTiff if input file is not GeoTiff
- overwritten if input is GeoTiff
-
- Recurse subdirectories
- Select...
+ Сонгох...
Proximity (Raster distance)
-
&Values
-
&Dist units
-
GEO
-
PIXEL
-
&Max dist
-
&No data
-
&Fixed buf val
-
Rasterize (Vector to raster)
-
&Input file (shapefile)
-
&Attribute field
-
&Output file for rasterized vectors (raster)
-
Keep existing raster size and resolution
-
Raster size in pixels
-
Raster resolution in map units per pixel
-
Horizontal
- Хэвтээ
+
Vertical
- Босоо
+
Sieve
-
&Threshold
-
&Pixel connections
-
8
- Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
- Raster tile index
+
- %
- %
+ Input directory
+
- Assign a specified nodata value to output bands.
- Output shapefile
+
- To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
-The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
- Tile index field
+
- Fill Nodata
- location
+ байрлал
- &Input Layer
- Write absolute path
+
- Search distance
-
-
- Smooth iterations
-
-
- Band to operate on
-
-
- Validity mask
-
-
- Do not use the default validity mask
- Skip files with different projection ref
+
Translate (Convert format)
-
&Target SRS
-
+
+ Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
+
Outsize
-
+
+ %
+
+
+ Assign a specified nodata value to output bands.
+
+
+ To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
+
Expand
-
Gray
- Саарал
+
Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
-
Srcwin
-
-
- Prjwin
-
Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
-
+
+ Prjwin
+
Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
-
Sds
-
-
- Output format
- Гаралтын төрөл
-
-
- Near
-
-
- Bilinear
-
-
- Cubic
- Шоон
-
-
- Cubic spline
-
-
- Lanczos
-
-
- No data values
-
-
- MB
-
-
- &Source SRS
-
Warp (Reproject)
-
+
+ &Source SRS
+
&Resampling method
-
+
+ Near
+
+
+ Bilinear
+
+
+ Cubic
+
+
+ Cubic spline
+
+
+ Lanczos
+
+
+ No data values
+
&Memory used for caching
-
- Resize
- MB
+
Use m&ultithreaded warping implementation
-
- Raster tile index
-
-
- Input directory
- Оролтын ажлын хавтас
-
-
- Output shapefile
-
-
- Tile index field
-
-
- location
- байрлал
-
-
- Write absolute path
-
-
- Skip files with different projection ref
- &Output directory for contour lines (shapefile)
+
@@ -5066,15 +4799,15 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Please specify valid tolerance value
-
Please specify valid UID field
-
Singleparts to multipart
-
Output shapefile
@@ -5082,7 +4815,7 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Multipart to singleparts
-
Extract nodes
@@ -5094,60 +4827,43 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Input polygon vector layer
- Оролтын полигон давхарга
+
Export/Add geometry columns
-
Input vector layer
- Вектор давхаргыг сонгох
+
Layer CRS
-
Project CRS
-
Ellipsoid
-
-
- Lines to polygons
-
-
- Input line vector layer
- Оролтын шулуун давхарга
-
-
- One or more features in the output layer may have invalid geometry, please check using the check validity tool
-
-
-
- Layer '{0}' updated
-
Polygon centroids
-
Output point shapefile
- Цэгэн файлын гаргалт
+
Delaunay triangulation
-
Input point vector layer
- Оролтын цэгэн давхарга
+
Voronoi polygon
@@ -5155,23 +4871,27 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Buffer region
-
+
+ Lines to polygons
+
+
+ Input line vector layer
+
Polygon from layer extent
-
Input layer
- Оролтын Давхагра
+
Output polygon shapefile
-
-
- Geoprocessing
- Гео боловсруулалт
+
Unable to delete existing shapefile.
@@ -5179,40 +4899,49 @@ The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
+
+ Cancel
+
Error processing specified tolerance!
Please choose larger tolerance...
-
Unable to delete incomplete shapefile.
-
At least two features must have same attribute value!
Please choose another field...
-
+
+ One or more features in the output layer may have invalid geometry, please check using the check validity tool
+
+
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
+
+ Layer '{0}' updated
+
Error writing output shapefile.
-
-
- Cancel
- Хасах
+
@@ -5223,31 +4952,31 @@ Please choose another field...
Geoprocessing
- Гео боловсруулалт
+
Please specify an input layer
-
Please specify a difference/intersect/union layer
-
Please specify valid buffer value
-
Please specify dissolve field
-
Please specify output shapefile
- Гаралтын ажлыг зааж өгнө үү
+
No features selected, please uncheck 'Use selected' or make a selection
-
Buffer(s)
@@ -5255,116 +4984,55 @@ Please choose another field...
Create single minimum convex hull
-
Create convex hulls based on input field
-
Convex hull(s)
-
Dissolve
- Задлах
+
Difference layer
-
Difference
- Зөрүү
+
Intersect layer
- Огтолцох давхарга
+
Intersect
- Огтлол
+
Clip layer
-
Clip
-
Union layer
-
Union
- Нэгтгэх
+
Unable to delete existing shapefile.
- Байгаа shp файлыг усгах боломжгүй.
-
-
- No output created. File creation error:
-%s
-
-
- Created output shapefile:
-%s
-%s%s
-
-
- Error loading output shapefile:
-%s
-
-
-
-Warnings:
-
-Анхааруулга:
-
-
- Symmetrical difference
-
-
-
-Some output geometries may be missing or invalid.
-
-Would you like to add the new layer anyway?
-
-
-
-
-Would you like to add the new layer to the TOC?
-
-
-
-
-
-
-Input CRS error: Different input coordinate reference systems detected, results may not be as expected.
-
-
-
-Input CRS error: One or more input layers missing coordinate reference information, results may not be as expected.
-
-
-
-Feature geometry error: One or more output features ignored due to invalid geometry.
-
-
-
-GEOS geoprocessing error: One or more input features have invalid geometry.
-
Cancel
@@ -5374,13 +5042,62 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Close
Хаах
+
+ No output created. File creation error:
+%s
+
+
+ Created output shapefile:
+%s
+%s%s
+
+
+ Error loading output shapefile:
+%s
+
+
+
+Warnings:
+
+Анхааруулга:
+
+
+ Symmetrical difference
+
+
+
+Some output geometries may be missing or invalid.
+
+Would you like to add the new layer anyway?
+
+
+
+Input CRS error: Different input coordinate reference systems detected, results may not be as expected.
+
+
+
+Input CRS error: One or more input layers missing coordinate reference information, results may not be as expected.
+
+
+
+Feature geometry error: One or more output features ignored due to invalid geometry.
+
+
+
+GEOS geoprocessing error: One or more input features have invalid geometry.
+
GlobePlugin
-
- Globe
- Глоб
-
Launch Globe
@@ -5394,7 +5111,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Unload Globe
-
Unload globe
-
Heatmap
-
Creates a heatmap raster for the input point vector.
-
&Heatmap
-
GDAL driver error
-
Cannot open the driver for the specified format
-
Raster update error
-
Could not open the created raster for updating. The heatmap was not generated.
-
Creating heatmap
-
Abort
-
Heatmap generation aborted
-
QGIS will now load the partially-computed raster.
-
@@ -5486,37 +5203,37 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Save Heatmap as:
-
No valid layers found!
-
Advanced options cannot be enabled.
-
Invalid output filename
-
Please enter a valid output file path and name.
-
Layer not found
-
Layer %1 not found.
-
@@ -5524,174 +5241,159 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Heatmap Plugin
-
...
- ...
+
Input point layer
- Цэгэн давхаргыг заах
+
Output raster
-
Output format
-
Radius
-
10
- 10
+
meters
-
map units
- зургийн нэгж
+
Rows
- Мөр
+
Cell size X
-
Columns
- Багана
+
Cell size Y
-
Use radius from field
-
Use weight from field
-
0.0
- 0.0
+
Decay ratio
-
Quartic (biweight)
-
Triangular
-
Uniform
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
-
- 0.1
- 0.1
+
Advanced
- Нэмэлт
-
-
-
- Help
-
- Dialog
- Харилцах цонх
-
-
- about:blank
- тухай:хоосон
+
HelpEditionDialog
Outputs
-
HistoryDialog
Clear
- Цэвэрлэх
+
Clear history and log
-
Confirmation
-
Are you sure you want to clear log?
-
Create test
-
@@ -5699,24 +5401,24 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Dialog
- Харилцах цонх
+
Reload
-
Save
- Хадгалах
+
InfoViewer
DB Manager
-
@@ -5724,34 +5426,26 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Form
-
Symbol layer type
-
This layer doesn't have any editable properties
-
MainWindow
- &Edit
&Засах
-
- &File
- &Файл
-
-
- &Open Recent Projects
- &Сүүлийн төслийг нээх
-
Print Composers
@@ -5768,1373 +5462,1285 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Сонгох
- Measure
Хэмжих
- &Layer
- &Давхарга
-
-
- New
- Шинэ
-
-
- &Settings
- &Тохируулга
-
-
- &Plugins
- &Өргөтгөл
-
-
- &Decorations
&Чимэглэл
- &Raster
- &Растер
+ &Layer
+ &Давхарга
- New
+ Шинэ
+
+
+ &Plugins
+ &Өргөтгөл
+
+
+ &Help
&Тусламж
- &Settings
+ &Тохируулга
+
+
+ &Raster
+ &Растер
+
+
+ Vect&or
- Вект&oр
+
- &OpenStreetMap
-
- File
Ажил
- Manage Layers
- Давхаргын удирдлага
+
- Digitizing
Давхарлан зурах
- Advanced Digitizing
-
- Map Navigation
Зургийн навигаци
- Attributes
Атрибут
- Plugins
Өргөтгөл
- Help
Тусламж
- Raster
Растер
- Label
Шошго
- Vector
- Вестор
+
- Database
- Өгөгдлийн сан
+
- Web
- Веб
+
- &New Project
- &Шинэ төсөл
-
-
- Ctrl+N
Ctrl+N
- &Open Project...
- &Төсөл Нээх...
-
-
- Ctrl+O
Ctrl+O
- &Save Project
- &Төсөл Хадгалах
-
-
- Ctrl+S
Ctrl+S
- Save Project &As...
- Төслийг дахин &Хадгалах...
-
-
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Дүрсээр Хадгалах...
- &New Print Composer
&Шинэ Хэвлэлийн Эх
- Ctrl+P
Ctrl+P
- Embed Layers and Groups...
-
-
- Run Feature Action
-
-
- Touch zoom and pan
-
-
- Offset Curve
-
-
- Exit
- Гарах
-
-
- Ctrl+Q
- Ctrl+Q
-
-
- &Undo
- &Буцаах
-
-
- Ctrl+Z
- Ctrl+Z
-
-
- &Redo
- &Дахих
-
-
- Ctrl+Shift+Z
- Ctrl+Shift+Z
-
-
- Cut Features
- Объектийг авах
-
-
- Ctrl+X
- Ctrl+X
-
-
- Copy Features
- Объектийг хувилах
-
-
- Ctrl+C
- Ctrl+C
-
-
- Paste Features
- Объект оруулах
-
-
- Ctrl+V
- Ctrl+V
-
-
- Capture Point
- Цэг Оруулах
-
-
- Ctrl+.
- Ctrl+.
-
-
- Capture Line
- Шугам Оруулах
-
-
- Ctrl+/
- Ctrl+/
-
-
- Capture Polygon
- Полигон Оруулах
-
-
- Ctrl+?
- Ctrl+?
-
-
- Add feature
- Обьект нэмэх
-
-
- Move Feature(s)
- Зөөх
-
-
- Reshape Features
- Хэлбэр өөрчлөх
-
-
- Split Features
-
-
- Delete Selected
- Сонгосныг Устгах
-
-
- Add Ring
-
-
- Add Part
-
-
- Simplify Feature
-
-
- Delete Ring
-
-
- Delete Part
-
-
- Merge attributes of selected features
- Сонгогдсон обьектүүдийн атрибутыг нэгтгэх
-
-
- Node Tool
-
-
- Rotate Point Symbols
- Цэгэн тэмдэглэгээг эргүүлэх
-
-
- Snapping Options...
-
-
- Pan Map
- Зураг бэлтгэх
-
-
- Zoom In
- Томруулах
-
-
- Ctrl++
- Ctrl++
-
-
- Zoom Out
- Багасгах
-
-
- Ctrl+-
- Ctrl+-
-
-
- Select single feature
- Дан обьект сонгох
-
-
- Select features by rectangle
- Тэгш өнцөгтөөр обьект сонгох
-
-
- Select features by polygon
- Полигоноор обьект сонгох
-
-
- Deselect features from all layers
- Сонголтуудыг арилгах
-
-
- Identify Features
- Объект тодорхойлох
-
-
- Ctrl+Shift+I
- Ctrl+Shift+I
-
-
- Measure Line
- Шугам Хэмжих
-
-
- Ctrl+Shift+M
- Ctrl+Shift+M
-
-
- Measure Area
- Талбай Хэмжих
-
-
- Ctrl+Shift+J
- Ctrl+Shift+J
-
-
- Measure Angle
- Өнцөг хэмжих
-
-
- Zoom Full
- Бүгдийш Багтаах
-
-
- Ctrl+Shift+F
- Ctrl+Shift+F
-
-
- Zoom to Layer
- Давхаргаар Багтаах
-
-
- Zoom to Selection
- Сонгосон обьект рүү томсгох
-
-
- Ctrl+J
- Ctrl+J
-
-
- Zoom Last
- Сүүлийнхийг Багтаах
-
-
- Zoom Next
-
-
- Zoom Actual Size
-
-
- Zoom to Native Pixel Resolution
-
-
- Map Tips
- Зургийн Зөвлөмж
-
-
- Show information about a feature when the mouse is hovered over it
-
-
- New Bookmark...
- Шинэ хавчуулга...
-
-
- Ctrl+B
- Ctrl+B
-
-
- Show Bookmarks
- Хавчуурга Үзүүлэх
-
-
- Ctrl+Shift+B
- Ctrl+Shift+B
-
-
- Refresh
- Сэргээх
-
-
- Ctrl+R
- Ctrl+R
-
-
- Text Annotation
-
-
- Move Annotation
-
-
- Labeling
-
-
- Layer Labeling Options
-
-
- New Shapefile Layer...
- Шинэ SHP Давхарга...
-
-
- Ctrl+Shift+N
- Ctrl+Shift+N
-
-
- New SpatiaLite Layer ...
- Шинэ SpatiaLite Давхарга...
-
-
- Ctrl+Shift+A
- Ctrl+Shift+A
-
-
- Raster calculator ...
- Растер Тооцоологч...
-
-
- Add Vector Layer...
- Вектор Давхарга Нэмэх...
-
-
- Ctrl+Shift+V
- Ctrl+Shift+V
-
-
- Add Raster Layer...
- Растер Давхарга Нэмэх...
-
-
- Ctrl+Shift+R
- Ctrl+Shift+R
-
-
- Add Oracle Spatial Layer...
-
-
- Save for Selected Layer(s)
-
-
- Manage and Install Plugins...
-
-
- F11
- F11
-
-
- Rotate Label
-Ctl (Cmd) increments by 15 deg.
-
-
- Copy style
-
-
- Paste style
-
-
- Add WCS Layer...
-
-
- &Grid
-
-
- Grid
- Тор
-
-
- Pin/Unpin Labels
-
-
- Pin/Unpin Labels
-Click or marquee on label to pin
-Shift unpins, Ctl (Cmd) toggles state
-Acts on all editable layers
-
-
- Highlight Pinned Labels
-
-
- New Blank Project
-
-
- Local Cumulative Cut Stretch
-
-
- Local cumulative cut stretch using current extent, default limits and estimated values.
-
-
- Full Dataset Cumulative Cut Stretch
-
-
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
-
-
- Show/Hide Labels
-
-
- Show/Hide Labels
-Click or marquee on feature to show label
-Shift+click or marquee on label to hide it
-Acts on currently active editable layer
-
-
- Html Annotation
-
-
- Duplicate Layer(s)
-
-
- SVG annotation
-
-
- Save for All Layers
-
-
- Rollback for All Layers
-
-
- Cancel for All Layers
-
-
- Rollback for Selected Layer(s)
-
-
- Current Edits
-
-
- Cancel for Selected Layer(s)
-
-
- Save Layer Edits
-
-
- Rotate Feature(s)
-
-
- &Download data
-
-
- &Import topology from XML
-
-
- &Export topology to SpatiaLite
-
-
- Increase brightness
-
-
- Decrease brightness
-
-
- Increase contrast
-
-
- Decrease contrast
-
-
- Select By Expression
-
-
- Select features using an expression
-
-
- Need commercial support?
-
-
- DXF Export...
-
-
- Fill Ring
-
-
- Add from Layer Definition File...
-
-
- Save As Layer Definition File...
-
-
- Normal
-
-
- Normal preview mode
-
-
- Simulate Photocopy (Grayscale)
-
-
- Simulate photocopy (grayscale)
-
-
- Simulate Fax (Mono)
-
-
- Simulate fax (mono)
-
-
- Simulate Color Blindness (Protanope)
-
-
- Simulate color blindness (protanope)
-
-
- Simulate Color Blindness (Deuteranope)
-
-
- Simulate color blindness (deuteranope)
-
-
- Set Scale Visibility of Layer(s)
-
-
- Open Field Calculator
-
-
- Add Delimited Text Layer...
-
-
- Add Delimited Text Layer
- Зааглагдсан Текстэн Давхарга Нэмэх
-
-
- New Vector Layer
- Шинэ Вектор Давхарга
-
-
- Paste features in clipboard into a new OGR vector layer.
-
-
- New Memory Vector Layer
-
-
- Paste features in clipboard into a new memory vector layer.
-
-
- Add PostGIS Layer...
- PostGIS Давхарга Нэмэх...
-
-
- Ctrl+Shift+D
- Ctrl+Shift+D
-
-
- Add SpatiaLite Layer...
- SpatiaLite Давхарга Нэмэх...
-
-
- Ctrl+Shift+L
- Ctrl+Shift+L
-
-
- Add WMS/WMTS Layer...
- WMS давхарга нэмэх...
-
-
- Ctrl+Shift+W
- Ctrl+Shift+W
-
-
- Open Attribute Table
- Атрибут хүснэгтийг нээх
-
-
- Toggles the editing state of the current layer
-
-
- Save edits
- Засвар хадгалах
-
-
- Save edits to current layer, but continue editing
-
-
- Save as...
- Өөрөөр хадгалах...
-
-
- Save Selection as vector file...
- Сонголтыг вектор ажил болгоон хадгалах...
-
-
- Remove Layer(s)
-
-
- Ctrl+D
- Ctrl+D
-
-
- Set CRS of Layer(s)
-
-
- Ctrl+Shift+C
- Ctrl+Shift+C
-
-
- Remove All from Overview
-
-
- Style Manager...
-
-
- Stretch Histogram to Full Dataset
-
-
- Customization...
-
-
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
-
-
- Ctrl+M
- Ctrl+M
-
-
- Embed layers and groups from other project files
-
-
- &Copyright Label
- &Зохиогчийн Эрхийн Тэмдэг
-
-
- Creates a copyright label that is displayed on the map canvas.
- Зурагт тавишдах зохиогчийн эрхийн тэмдэг бэлтгэнэ.
-
-
- &North Arrow
- &Хойд Зүгийн Сум
-
-
- "Creates a north arrow that is displayed on the map canvas"
-
-
- &Scale Bar
- &Масштаб
-
-
- Creates a scale bar that is displayed on the map canvas
- Зурагт тавигдах масштабын шугамыг үүсгэх
-
-
- Add WFS Layer...
-
-
- Add WFS Layer
-
-
- Feature Action
-
-
- Pan Map to Selection
-
-
- Properties...
- Composer Manager...
+
P&roject
-
&Open Recent
-
New From Template
-
- Preview Mode
-
- Paste Features as
-
- &New
- &Шинэ
+
- &Open...
-
- &Save
-
- Save &As...
-
- Composer Manager...
-
-
- Exit QGIS
- QGIS-аас гарах
+
- Ctrl+Q
+ Ctrl+Q
+
+
+ &Undo
+ &Буцаах
+
+
+ Ctrl+Z
+ Ctrl+Z
+
+
+ &Redo
+ &Дахих
+
+
+ Ctrl+Shift+Z
+ Ctrl+Shift+Z
+
+
+ Cut Features
+
+
+ Ctrl+X
+ Ctrl+X
+
+
+ Copy Features
+
+
+ Ctrl+C
+ Ctrl+C
+
+
+ Paste Features
+
+
+ Ctrl+V
+ Ctrl+V
+
+
+ Add Feature
-
- Ctrl+.
+ Ctrl+.
+
+
+ Move Feature(s)
+ Зөөх
+
+
+ Reshape Features
+ Хэлбэр өөрчлөх
+
+
+ Split Features
+
+
+ Split Parts
-
- Delete Selected
+ Сонгосныг Устгах
+
+
+ Add Ring
+
+
+ Add Part
+
+
+ Simplify Feature
+
+
+ Delete Ring
+
+
+ Delete Part
+
+
+ Merge Selected Features
-
- Merge Attributes of Selected Features
-
- Node Tool
+
+
+ Rotate Point Symbols
+ Цэгэн тэмдэглэгээг эргүүлэх
+
+
+ Snapping Options...
+
+
+ Pan Map
+
+
+ Zoom In
+ Томруулах
+
+
+ Ctrl++
+ Ctrl++
+
+
+ Zoom Out
+ Багасгах
+
+
+ Ctrl+-
+ Ctrl+-
+
+
+ Select Single Feature
+
+
+ Select Features by Rectangle
+
+
+ Select Features by Polygon
-
- Select Features by Freehand
-
- Select Features by Radius
-
- Deselect Features from All Layers
-
- F5
- F5
+ Identify Features
+
- Ctrl+Shift+I
+ Ctrl+Shift+I
+
+
+ Measure Line
+ Шугам Хэмжих
+
+
+ Ctrl+Shift+M
+ Ctrl+Shift+M
+
+
+ Measure Area
+ Талбай Хэмжих
+
+
+ Ctrl+Shift+J
+ Ctrl+Shift+J
+
+
+ Measure Angle
+ Өнцөг хэмжих
+
+
+ Zoom Full
+ Бүгдийш Багтаах
+
+
+ Ctrl+Shift+F
+ Ctrl+Shift+F
+
+
+ Zoom to Layer
+ Давхаргаар Багтаах
+
+
+ Zoom to Selection
+ Сонгосон обьект рүү томсгох
+
+
+ Ctrl+J
+ Ctrl+J
+
+
+ Zoom Last
+
+
+ Zoom Next
+
+
+ Zoom Actual Size
+
+
+ Zoom to Native Pixel Resolution
+
+
+ Map Tips
+ Зургийн Зөвлөмж
+
+
+ Show information about a feature when the mouse is hovered over it
+
+
+ New Bookmark...
+ Шинэ хавчуулга...
+
+
+ Ctrl+B
+ Ctrl+B
+
+
+ Show Bookmarks
+ Хавчуурга Үзүүлэх
+
+
+ Ctrl+Shift+B
+ Ctrl+Shift+B
+
+
+ Refresh
+ Сэргээх
+
+
+ Text Annotation
+
+
+ Form Annotation
-
- Move Annotation
+
+
+ Labeling
+
+
+ Layer Labeling Options
+
+
+ New Shapefile Layer...
+ Шинэ SHP Давхарга...
+
+
+ Ctrl+Shift+N
+ Ctrl+Shift+N
+
+
+ New SpatiaLite Layer ...
+ Шинэ SpatiaLite Давхарга...
+
+
+ Ctrl+Shift+A
+ Ctrl+Shift+A
+
+
+ Raster calculator ...
+ Растер Тооцоологч...
+
+
+ Add Vector Layer...
+ Вектор Давхарга Нэмэх...
+
+
+ Ctrl+Shift+V
+ Ctrl+Shift+V
+
+
+ Add Raster Layer...
+ Растер Давхарга Нэмэх...
+
+
+ Ctrl+Shift+R
+ Ctrl+Shift+R
+
+
+ Add PostGIS Layers...
-
- Ctrl+Shift+D
+ Ctrl+Shift+D
+
+
+ Add SpatiaLite Layer...
+ SpatiaLite Давхарга Нэмэх...
+
+
+ Ctrl+Shift+L
+ Ctrl+Shift+L
+
+
+ Add MSSQL Spatial Layer...
-
- Toggle Editing
- Add Oracle Spatial Layer...
+
- Save As...
-
-
- Set Project CRS from Layer
-
-
- Query...
-
-
- Add to Overview
-
-
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
+
+
+ Ctrl+Shift+W
+ Ctrl+Shift+W
+
+
+ Open Attribute Table
+ Атрибут хүснэгтийг нээх
+
+
+ Toggle Editing
+
+
+ Toggles the editing state of the current layer
+
+
+ Save for Selected Layer(s)
+
+
+ Save edits to current layer, but continue editing
+
+
+ Save As...
+
+
+ Add from Layer Definition File...
+
+
+ Save As Layer Definition File...
+
+
+ Normal
+
+
+ Normal preview mode
+
+
+ Simulate Photocopy (Grayscale)
+
+
+ Simulate photocopy (grayscale)
+
+
+ Simulate Fax (Mono)
+
+
+ Simulate fax (mono)
+
+
+ Simulate Color Blindness (Protanope)
+
+
+ Simulate color blindness (protanope)
+
+
+ Simulate Color Blindness (Deuteranope)
+
+
+ Simulate color blindness (deuteranope)
+
+
+ Set Scale Visibility of Layer(s)
+
+
+ Remove Layer(s)
+
+
+ Ctrl+D
+ Ctrl+D
+
+
+ Set CRS of Layer(s)
+
+
+ Ctrl+Shift+C
+ Ctrl+Shift+C
+
+
+ Set Project CRS from Layer
+
+
+ Properties...
+
+
+ Query...
+
+
+ Add to Overview
+
+
+ Add All to Overview
-
- Remove All From Overview
- Үзүүлбэрээс Бүгд-ийг Арилгах
+ Remove All from Overview
+
- Show All Layers
Бүх Давхаргыг Үзүүлэх
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Бүх Давхаргыг Нуух
- Ctrl+Shift+H
Ctrl+Shift+H
- Toggle Full Screen Mode
- Manage and Install Plugins...
+
- Open Field Calculator
+
+
+ Add Delimited Text Layer...
+
+
+ Add Delimited Text Layer
+
+
+ New Vector Layer
+
+
+ Paste features in clipboard into a new OGR vector layer.
+
+
+ New Memory Vector Layer
+
+
+ Paste features in clipboard into a new memory vector layer.
+
+
+ Toggle Full Screen Mode
+
+
+ F5
+
+
+ Ctrl+F
Ctrl+F
- Select Feature(s)
- F11
+
- Select Features by area or single click
-
-
- Project Properties...
Төслийн Үзүүлэлт...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Сонголтууд...
- Custom CRS...
-
- Configure shortcuts...
-
- Local Histogram Stretch
-
- Stretch histogram of active raster to view extents
-
- Help Contents
Тусламжийн агуулга
- F1
F1
- API documentation
-
- QGIS Home Page
QGIS Нүүр Хуудас
- Ctrl+H
Ctrl+H
- Check QGIS Version
-
- Check if your QGIS version is up to date (requires internet access)
Таны QGIS хувилбар сүүлийн үеийн хувилбар гэдгийг шалгах (интернэт холболт хэрэгтэй)
- About
Тухай
- QGIS Sponsors
QGIS Ивээн Тэтгэгчид
- Move Label
-
- Rotate Label
-
- Rotate Label
+Ctl (Cmd) increments by 15 deg.
+
+
+ Change Label
-
- Style Manager...
+
+
+ Python Console
Пайтон Консол
- Full histogram stretch
-
+
+ Stretch Histogram to Full Dataset
+
+
+ Customization...
+
+
+ This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
+
+
+ Ctrl+M
+ Ctrl+M
+
+
+ Embed Layers and Groups...
+
+
+ Embed layers and groups from other project files
+
+
+ &Copyright Label
+ &Зохиогчийн Эрхийн Тэмдэг
+
+
+ Creates a copyright label that is displayed on the map canvas.
+ Зурагт тавишдах зохиогчийн эрхийн тэмдэг бэлтгэнэ.
+
+
+ &North Arrow
+ &Хойд Зүгийн Сум
+
+
+ "Creates a north arrow that is displayed on the map canvas"
+
+
+ &Scale Bar
+ &Масштаб
+
+
+ Creates a scale bar that is displayed on the map canvas
+ Зурагт тавигдах масштабын шугамыг үүсгэх
+
+
+ Add WFS Layer...
+
+
+ Add WFS Layer
+
+
+ Feature Action
+
+
+ Run Feature Action
+
+
+ Pan Map to Selection
+
+
+ Touch zoom and pan
+
+
+ Offset Curve
+
+
+ Copy style
+
+
+ Paste style
+
+
+ Add WCS Layer...
+
+
+ &Grid
+
+
+ Grid
+
+
+ Pin/Unpin Labels
+
+
+ Pin/Unpin Labels
+Click or marquee on label to pin
+Shift unpins, Ctl (Cmd) toggles state
+Acts on all editable layers
+
+
+ Highlight Pinned Labels
+
+
+ New Blank Project
+
+
+ Local Cumulative Cut Stretch
+
+
+ Local cumulative cut stretch using current extent, default limits and estimated values.
+
+
+ Full Dataset Cumulative Cut Stretch
+
+
+ Cumulative cut stretch using full dataset extent, default limits and estimated values.
+
+
+ Show/Hide Labels
+
+
+ Show/Hide Labels
+Click or marquee on feature to show label
+Shift+click or marquee on label to hide it
+Acts on currently active editable layer
+
+
+ Html Annotation
+
+
+ Duplicate Layer(s)
+
+
+ SVG annotation
+
+
+ Save for All Layers
+
+
+ Rollback for All Layers
+
+
+ Cancel for All Layers
+
+
+ Rollback for Selected Layer(s)
+
+
+ Current Edits
+
+
+ Cancel for Selected Layer(s)
+
+
+ Save Layer Edits
+
+
+ Rotate Feature(s)
+
+
+ &Download data
+
+
+ &Import topology from XML
+
+
+ &Export topology to SpatiaLite
+
+
+ Increase brightness
+
+
+ Decrease brightness
+
+
+ Increase contrast
+
+
+ Decrease contrast
+
+
+ Select By Expression
+
+
+ Select features using an expression
+
+
+ Need commercial support?
+
+
+ DXF Export...
+
+
+ Fill Ring
+
@@ -7142,76 +6748,76 @@ Acts on currently active editable layer
Manage connections
- Холболтуулыг цэгцлэх
+
Save to file
-
Browse
-
Load from file
-
Load
- Дуудах
+
Save
- Хадгалах
+
eXtensible Markup Language (*.xml *.XML)
-
Save connections
-
Load connections
- Холболтыг ачааллах
+
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
-
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -7219,423 +6825,411 @@ Acts on currently active editable layer
MetaSearch
-
Search
- Хайх
+
Find
- Олох
+
Set global
-
Map extent
-
-180
-
90
- 90
+
Records
-
-90
-
180
- 180
+
From
-
Keywords
- Түлхүүр үгс
+
Results
-
>
- >
+
<<
-
Add WCS
-
Add WMS/WMTS
-
<
- <
+
Add WFS
-
Abstract
-
Double click to see full record information
-
Type
- Төрөл
+
Title
- Гарчиг
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
- Шинэ
+
Edit
-
Delete
-
Save
- Хадгалах
+
Add default services
-
Load
- Дуудах
+
Settings
-
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
-
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
ModelerDialog
-
- Run
- Ажиллуулах
-
-
- Open
- Нээх
-
-
- Save
- Хадгалах
-
Search...
-
Message
-
There are unsaved changes in model. Close modeler without saving?
-
Empty model
-
Save Model As Image
-
PNG files (*.png *.PNG)
-
Warning
- Анхааруулга
+
Please enter group and model names before saving
-
Save Model
-
Processing models (*.model)
-
I/O error
-
Unable to save edits. Reason:
%s
-
Can't save model
-
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
-
Model was correctly saved.
-
Open Model
-
Could not open model
-
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
-
MultipleInputDialog
Select all
-
Clear selection
-
Toggle selection
-
@@ -7643,130 +7237,107 @@ See the log for more information.
Create a new Catalogue connection
-
Name
- Нэр
+
URL
- URL
+
Save connection
-
Both Name and URL must be provided
-
Overwrite %s?
-
NotSupportedDbType
%s is not supported yet
-
NumberInputDialog
[Enter your formula here]
-
Values from data layers extents
-
Min X
-
Max X
-
Min Y
-
Max Y
-
Cellsize
-
Values from raster layers statistics
-
Mean
- Дундаж
+
Std. deviation
-
Max value
-
Min value
-
Values from QGIS map canvas
-
Current extent
- Одоогийн орон зайн хүрээ
+
Full extent of all layers in map canvas
-
Wrong expression
-
The expression entered is not correct
-
-
-
- OgrConverterGuiBase
-
- Source
- Эх
-
-
- File
- Файл
-
-
- Directory
- Хавтас
-
-
- Browse
- Хайх
-
-
- Layer
- Давхарга
+
@@ -7781,6 +7352,11 @@ See the log for more information.
Name
Нэр
+
+ Name of the new connection
+ Шинэ холболтын нэр
+
Database instance
@@ -7796,455 +7372,119 @@ See the log for more information.
Password
Нууц үг
-
- Name of the new connection
- Шинэ холболтын нэр
-
Save Password
Нууц үгийг хадгалах
-
- OsmAddRelationDlg
-
- ...
- ...
-
-
- Properties
- Мөнчанар
-
-
- Members
- Гишүүд
-
-
- Create
- Үүсгэх
-
-
- Cancel
- Гарах
-
-
- Save
- Хадгалах
-
-
-
- OsmDownloadDlg
-
- Download OSM data
- OSM өгөгдөл татаж авах
-
-
- Extent
- Хүрээ
-
-
- Latitude:
- Өргөрөг:
-
-
- From
- -ээс
-
-
- To
- хүртэл
-
-
- Longitude:
- Уртраг:
-
-
- ...
- ...
-
-
- Download to:
- Энд татаж авах:
-
-
- Download
- Татаж авах
-
-
- Cancel
- Гарах
-
-
- Unable to save the file %1: %2.
- %1: %2 ажлыг хадгалах боломжгүй.
-
-
- Waiting for OpenStreetMap server ...
- OpenStreetMap серверийг хүлээж байна...
-
-
- Download process failed. OpenStreetMap server response: %1 - %2
- Татаж авах явах амжилтгүй боллоо. OpenStreetMap серверийн хариу: %1 - %2
-
-
- Getting data
- Өгөгдөл авч байна
-
-
-
- OsmFeatureDW
-
- OSM Plugin
- OSM Хэрэгсэл
-
-
- ...
- ...
-
-
- Create point
- Цэг үүсгэх
-
-
- Create line
- Шулуун үүсгэх
-
-
- Create polygon
- Полигон үүсгэх
-
-
- Undo
- Undo
-
-
- Redo
- Дахих
-
-
- unknown
- мэдэгдэхгүй
-
-
- Properties
- Шинж чанар
-
-
- Relations
- Холбоосууд
-
-
- 1
- 1
-
-
-
- OsmImportDlg
-
- Import data to OSM
- Өгөгдлийг OSM руу гаргах
-
-
- In this dialog you can import a layer loaded in QGIS into active OSM data.
- Энэхүү харилцах цонхонд QGIS-ийн давхаргуудыг идэвхтэй байгаа OSM мэдээнд оруулах.
-
-
- Layer
- Давхарга
-
-
- Import only current selection
- Зөвхөн одоогийн сонголтыг оруулах
-
-
- Import
- Импорт
-
-
-
- OsmLoadDlg
-
- Load OSM
- OSM-ийг дуудах
-
-
- OpenStreetMap file to load:
- Дуудах OpenStreetMap ажил:
-
-
- ...
- ...
-
-
- Replace current data (current layers will be removed)
- Байгаа өгөдлийг солих (хуучин давхаргууд хасагдах болно)
-
-
- Error
- Алдаа
-
-
-
- OsmPlugin
-
- Save OSM to file
- OSM-ийг хадгалах
-
-
- Download OSM data
- OSM өгөгдөл татаж авах
-
-
-
- OsmSaveDlg
-
- Save OSM to file
- OSM-ийг хадгалах
-
-
- Unable to save the file %1: %2.
- %1: %2 ажлыг хадгалах боломжгүй.
-
-
- Initializing...
- Суурилуулж байна...
-
-
- Saving nodes...
- Зангилаа Цэгүүдийг хадгалаж байна...
-
-
- Saving lines...
- Шулуунуудыг хадгалж байна...
-
-
- Saving polygons...
- Полигонуудыг хадгалж байна...
-
-
- Saving relations...
- Холбоосуудйг хадгалж байна...
-
-
- Save OSM
- OSM хадгалах
-
-
- Where to save:
- Хадгалах хавтас:
-
-
- ...
- ...
-
-
- Features to save:
- Хадгалах обьектүүд:
-
-
- Points
- Цэг
-
-
- Lines
- Шулуун
-
-
- Polygons
- Полигон
-
-
- Relations
- Холбоосууд
-
-
- Tags
- Тэмдэглэгээ
-
-
-
- OsmUndoRedoDW
-
- OSM Edit History
- OSM Засварласан Түүх
-
-
- Clear all
- Бүгдийг цэвэрлэх
-
-
- ...
- ...
-
-
- Undo
- Буцаах
-
-
- Redo
- Дахих
-
-
-
- OsmUploadDlg
-
- 1
- 1
-
-
- 2
- 2
-
-
- 3
- 3
-
-
- 4
- 4
-
-
- 5
- 5
-
-
- Comment on your changes:
- Өөрчлөлтөндөө тайлбар хийх:
-
-
- OSM account
- OSM гишүүнчлэл
-
-
- Username:
- Хэрэглэгчийн нэр:
-
-
- Password:
- Нэвтрэх үг:
-
-
- Show password
- Нэвтрэх үгийг харуулах
-
-
- Save password
- Нэвтрэх үгийг санах
-
-
- Uploading data...
- Гаргаж буй өгөгдөл...
-
-
OutputSelectionPanel
[Save to temporary file]
-
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
- Ажлыг хадгалах
+
Select directory
-
PGDatabase
&Table
-
Run &Vacuum Analyze
-
Sorry
-
Select a TABLE for vacuum analyze.
-
PGTable
Table rule
-
PointsInPolygonThread
point count field
-
PostGisDBPlugin
There is no defined database connection "%s".
-
PrepareAPIDialog
Error
- Алдаа
+
Done
- Хийгдсэн
+
Processing
Processing
-
Toolbox
-
Graphical modeler
-
History and log
-
Options and configuration
-
&Results viewer
-
&Commander
-
@@ -8252,43 +7492,39 @@ See the log for more information.
Processing Toolbox
-
Enter algorithm name to filter list
-
Search...
-
Execute
-
Execute as batch process
-
Edit rendering styles for outputs
-
Recently used algorithms
-
Python
-
- Python
- Python
-
Python warning
-
An error has occured while executing Python code:
@@ -8312,413 +7548,384 @@ See the log for more information.
Couldn't load plugin '%s' from ['%s']
-
Couldn't load plugin %s
-
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
-
Error while unloading plugin %s
-
-
- Couldn't load plugin '%1' from ['%2']
- ['%2']-ээс '%1' хэрэгслийг ачааллах боломжгүй
-
-
- Couldn't load plugin %1
- %1 хэрэгслийг ачааллах боломжгүй
+
PythonConsole
- Clear console
- Python Console
+
- Settings
- Clear console
+
Compile APIs
-
Saving prepared file...
-
Saved
-
Done
- Хийгдсэн
+
Error preparing file...
-
Hide Editor
-
Check Syntax
-
Run selected
-
Run Script
-
Undo
-
Redo
- Дахих
+
Find Text
-
Cut
-
Copy
- Хуулах
+
Paste
-
Comment
- Тайлбар
+
Uncomment
-
Share on codepad
-
Hide/Show Object Inspector
-
Select All
-
+
+ Settings
+
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
-
Connection error:
-
[Temporary file saved in {0}]
-
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
-
You have to save the file before running it.
-
Python Console: Save file
-
Script was correctly saved.
-
Click on button to restore all tabs from last session.
-
Restore tabs
-
Close
- Хаах
+
List all tabs
-
New Editor
-
Close Tab
-
Close All
-
Close Others
-
Save As
- Өөрөөр хадгалах
+
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
-
The file <b>'{0}'</b> has been modified, save changes?
-
Unable to restore the file:
{0}
-
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
-
Show Editor
-
Enter Selected
-
Object Inspector
-
Open file
- Ажил нээх
+
Save
- Хадгалах
+
Save As...
-
Run script
-
Show editor
-
Import Class
-
Import Processing class
-
Enter text to find...
-
Find Next
-
Find Previous
-
Case Sensitive
-
Whole Word
-
Wrap Around
-
Open File
- Ажил нээх
+
Save Error
-
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
-
History saved successfully.
-
Session and file history cleared successfully.
-
History cleared successfully.
-
Command History
-
Show
-
Clear File
-
Clear Session
-
Python Console - Command History
-
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
-
Import PyQt.QtGui class
-
Run command
-
Help
-
-
- Python Console
-
-
- To access Quantum GIS environment from this console
-use qgis.utils.iface object (instance of QgisInterface class).
-
-
- энэ консолоос QuantumGIS орчинг ачаалахдаа
-qgis.utils.iface-ийг ашигла.
-
-
-
-
-
- QFileDialog
-
- Load layer properties from style file (.qml)
- Загвар файлаар (.qml) давхаргын шинж чанарыг зааж өгөх
-
-
- Save layer properties as style file (.qml)
- Давхаргын шинж чанарыг Загвар файл (.qml) болгон хадгалах
+
@@ -8726,12 +7933,12 @@ qgis.utils.iface-ийг ашигла.
meters
-
feet
-
degrees
-
<unknown>
-
nautical miles
-
@@ -8758,27 +7965,27 @@ qgis.utils.iface-ийг ашигла.
Unable to initialize
QOCISpatialDriver
-
Unable to logon
-
Unable to begin transaction
-
Unable to commit transaction
-
Unable to rollback transaction
-
@@ -8788,150 +7995,283 @@ qgis.utils.iface-ийг ашигла.
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to goto next
-
Unable to alloc statement
-
Unable to prepare statement
-
Unable to get statement type
-
Unable to bind value
-
Unable to execute statement
-
QObject
- No Data Providers
- Өгөгдөл Нийлүүлэгч Алга
+ Interpolating...
+ Интерполяц хийж байна...
- No vector layers can be loaded. Check your QGIS installation
- Вектор давхарга орж ирэх боломжгүй. QGIS суулгаснаа шалгана уу
+ Abort
+ Таслах
- No data provider plugins are available. No vector layers can be loaded
- Өгөгдөл нийлүүлэгч Өргөтгөл алга. Вектор давхарга орж ирэх боломжгүй
+ Building triangulation...
+ Гурвалжлал байгуулж байна...
- Unable to instantiate the data provider plugin %1
- Estimating normal derivatives...
+
- Failed to load %1: %2
- minidump written to %1
+
- Unknown operator: %1
- Үл мэдэгдэх оператор: %1
+ writing of minidump to %1 failed (%2)
+
- Division by zero.
- Тэгд хуваах үйлдэл.
+ creation of minidump to %1 failed (%2)
+
- Expression error: %1
- Илэрхийллийн алдаа: %1
+ Crash dumped
+
- Unknown error %1: %2
- Үл мэдэгдэх алдаa %1: %2
+ QGIS starting in non-interactive mode not supported.
+You are seeing this message most likely because you have no DISPLAY environment variable set.
+
+
- Geometry is 0
- Геометр нь 0 байна
+ Deleted vertices
+ Устгагдсан оройн цэгүүд
- Index %1 out of range [0;%2[
- Индекс %1 нь [0;%2[ хязгаараас гарсан байна
+ Moved vertices
+ Зөөгдсөн оройн цэгүүд
- Unknown error!
- Үл мэдэгдэх алдаa!
+ No active vector layer
+
- Python error
- Пайтон алдаа
+ To select features, choose a vector layer in the legend
+
+
+ CRS Exception
+
+
+ Selection extends beyond layer's coordinate system.
+
+
+ Python is not enabled in QGIS.
+
+
+ Plugins
+
+
+ Plugin "%1" is not compatible with this version of QGIS.
+It will be disabled.
+
+
+ Loaded %1 (package: %2)
+
+
+ Library name is %1
+
+ Номын сангийн нэр нь %1
+
+
+ Failed to load %1 (Reason: %2)
+
+
+ Attempting to resolve the classFactory function
+
+
+
+ Loaded %1 (Path: %2)
+
+
+ Error Loading Plugin
+ Хэрэгсэл Ачаалахад Алдаа
+
+
+ There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
+%1.
+ Хэрэгсэлийг ачааллахад алдаа гарлаа. Дараах алдааны мэдээлэл энэ алдааг засахад нэмэр болж магадгүй:
+%1.
+
+
+ Unable to find the class factory for %1.
+
+
+ Plugin %1 did not return a valid type and cannot be loaded
+
+
+ Error when reading metadata of plugin %1
+ %1 хэрэгслийн мета өгөгдлийг уншихад алдаа гарлаа
+
+
+ Could not open CRS database %1
+Error(%2): %3
+
+
+ CRS
+
+
+ Generated CRS
+ A CRS automatically generated from layer info get this prefix for description
+
+
+ Saved user CRS [%1]
+
+
+ Imported from GDAL
+
+
+ Can't open database: %1
+
Caught a coordinate system exception while trying to transform a point. Unable to calculate line length.
-
-
- Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
-
-
- km2
- км2
-
-
- ha
- га
-
-
- m2
- м2
-
-
- Can't open database: %1
-
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
-
+
+ Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
+
m²
-
km²
-
+
+ ha
+ га
cm
см
+
+ sq ft
+ кв фт
+
acres
-
кв мл
- sq ft
- кв фт
+ foot
+
+
+ feet
+
mile
мил
-
- foot
- foot
-
-
- feet
- Fuß
-
sq. NM
-
NM
-
sq.deg.
-
degree
- өнцөг
+
degrees
- өнцөг
+
unknown
мэдэгдэхгүй
+
+ Cannot convert '%1' to double
+
+
+ Cannot convert '%1' to int
+
+
+ Cannot convert '%1' to DateTime
+
+
+ Cannot convert '%1' to Date
+
+
+ Cannot convert '%1' to Time
+
+
+ Cannot convert '%1' to Interval
+
+
+ Cannot convert '%1' to boolean
+
+
+ Domain max must be greater than domain min
+
+
+ Exponent must be greater than 0
+
+
+ Invalid regular expression '%1': %2
+
+
+ Index is out of range
+
+
+ Cannot convert '%1:%2:%3' to color
+
+
+ Cannot convert '%1:%2:%3:%4' to color
+
+
+ "%1" is not a valid color ramp
+
+
+ Cannot convert '%1:%2:%3:%4:%5' to color
+
+
+ function help for %1 missing
+
+
+ Operators
+
+
+ Fields and Values
+
+
+ Math
+
+
+ Conversions
+
+
+ Conditionals
+
+
+ second|seconds
+ list of words separated by | which reference years
+
+
+ minute|minutes
+ list of words separated by | which reference minutes
+
+
+ hour|hours
+ list of words separated by | which reference minutes hours
+
+
+ day|days
+ list of words separated by | which reference days
+
+
+ week|weeks
+ wordlist separated by | which reference weeks
+
+
+ month|months
+ list of words separated by | which reference months
+
+
+ year|years
+ list of words separated by | which reference years
+
+
+ Date and Time
+
+
+ String
+
+
+ Color
+
+
+ Geometry
+
+
+ Record
+
+
+ No root node! Parsing failed?
+
+
+ (no root)
+
+
+ Unary minus only for numeric values.
+
+
+ Can't preform /, *, or % on DateTime and Interval
+
+
+ [unsupported type;%1; value:%2]
+
+
+ Column '%1' not found
+
+
+ Exception: %1
+
+
+ GEOS
+
+
+ GEOS prior to 3.2 doesn't support GEOSInterpolate
+
+
+ segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
+
+
+ ring %1 with less than four points
+
+
+ ring %1 not closed
+
+
+ line %1 with less than two points
+
+
+ line %1 contains %n duplicate node(s) at %2
+ number of duplicate nodes
+
+
+ segments %1 and %2 of line %3 intersect at %4
+
+
+ ring %1 of polygon %2 not in exterior ring
+
+
+ GEOS error:could not produce geometry for GEOS (check log window)
+
+
+ GEOS error:%1
+
+
+ polygon %1 has no rings
+
+
+ polygon %1 inside polygon %2
+
+
+ Unknown geometry type
+
+
+ Unknown geometry type %1
+
+
+ Geometry validation was aborted.
+
+
+ Geometry has %1 errors.
+
+
+ Geometry is valid.
+
+
+ invalid line
+
Label
Шошго
- CopyrightLabel
- Зохиогчийн эрхийн тэмдэг
+ Console
+
+
+ infinite
+
+
+ W
+ Б
+
+
+ E
+ З
+
+
+ S
+ Ө
+
+
+ N
+ Х
+
+
+ No QGIS data provider plugins found in:
+%1
+
+
+
+ No vector layers can be loaded. Check your QGIS installation
+ Вектор давхарга орж ирэх боломжгүй. QGIS суулгаснаа шалгана уу
+
+
+ No Data Providers
+ Өгөгдөл Нийлүүлэгч Алга
+
+
+ No data provider plugins are available. No vector layers can be loaded
+ Өгөгдөл нийлүүлэгч Өргөтгөл алга. Вектор давхарга орж ирэх боломжгүй
+
+
+ Unable to instantiate the data provider plugin %1
+
+
+ Failed to load %1: %2
+
+
+ OGR driver for '%1' not found (OGR error: %2)
+
+
+ trimming attribute name '%1' to ten significant characters produces duplicate column name.
+
+
+ creation of data source failed (OGR error:%1)
+
+
+ creation of layer failed (OGR error:%1)
+
+
+ unsupported type for field %1
+
+
+ creation of field %1 failed (OGR error: %2)
+
+
+ created field %1 not found (OGR error: %2)
+
+
+ Invalid variant type for field %1[%2]: received %3 with type %4
+
+
+ OGR
+
+
+ no available replacement for internal fieldname ogc_fid found
+
+
+ Reserved attribute name ogc_fid replaced with %1
+
+
+ By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
+
+
+ Feature geometry not imported (OGR error: %1)
+
+
+ Feature creation error (OGR error: %1)
+
+
+ Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
+
+
+ Feature write errors:
+
+
+ Stopping after %1 errors
+
+
+
+Only %1 of %2 features written.
+
+
+ Arc/Info ASCII Coverage
+
+
+ Atlas BNA
+
+
+ Comma Separated Value
+
+
+ ESRI Shapefile
+
+
+ DBF file
+
+
+ FMEObjects Gateway
+
+
+ New BNA files are created by the systems default line termination conventions. This may be overridden here.
+
+
+ BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
+
+
+ The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
+
+
+ Limit the number of coordinate pairs per line in multiline format.
+
+
+ Set the number of decimal for coordinates. Default value is 10.
+
+
+ By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
+
+
+ Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
+
+
+ Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
+
+
+ Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
+
+
+ set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
+
+
+ Set to YES to resize fields to their optimal size.
+
+
+ DBF File
+
+
+ Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
+
+
+ Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
+
+
+ GeoJSON
+ GeoJSON
+
+
+ whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
+
+
+ The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
+
+
+ If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
+
+
+ If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
+
+
+ XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
+
+
+ Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ GeoRSS
+ GeoRSS
+
+
+ If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
+
+
+ This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
+
+
+ This is the prefix for the application target namespace.
+
+
+ Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
+
+
+ Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
+
+
+ If not specified, GML2 will be used.
+
+
+ only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
+
+
+ only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
+
+
+ Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
+
+
+ Geography Markup Language [GML]
+ Geography Markup Language [GML]
+
+
+ Generic Mapping Tools [GMT]
+
+
+ By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
+
+
+ By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
+
+
+ If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
+
+
+ Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
+
+
+ Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
+
+
+ By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
+
+
+ GPS eXchange Format [GPX]
+
+
+ INTERLIS 1
+ INTERLIS 1
+
+
+ INTERLIS 2
+ INTERLIS 2
+
+
+ Allows you to specify the field to use for the KML <name> element.
+
+
+ Allows you to specify the field to use for the KML <description> element.
+
+
+ Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
+
+
+ Keyhole Markup Language [KML]
+
+
+ Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
+
+
+ Mapinfo TAB
+
+
+ Mapinfo MIF
+
+
+ Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
+
+
+ Override the seed file to use.
+
+
+ Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
+
+
+ Indicates whether the color table should be copied from the seed file.
+
+
+ Override the master unit name from the seed file with the provided one or two character unit name.
+
+
+ Override the sub unit name from the seed file with the provided one or two character unit name.
+
+
+ Override the number of subunits per master unit. By default the seed file value is used.
+
+
+ Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
+
+
+ ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
+
+
+ Microstation DGN
+ Microstation DGN
+
+
+ Should update files be incorporated into the base data on the fly.
+
+
+ Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
+
+
+ Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
+
+
+ If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
+
+
+ Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
+
+
+ Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
+
+
+ Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
+
+
+ S-57 Base file
+
+
+ Spatial Data Transfer Standard [SDTS]
+
+
+ Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
+
+
+ Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
+
+
+ Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
+
+
+ column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
+
+
+ By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
+
+
+ Field separator character.
+
+
+ Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
+
+
+ Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
+
+
+ SQLite
+ SQLite
+
+
+ Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
+
+
+ If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
+
+
+ If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
+
+
+ Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
+
+
+ SpatiaLite
+
+
+ AutoCAD DXF
+ AutoCAD DXF
+
+
+ Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
+
+
+ Geoconcept
+
+
+ When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
+
+
+ Set name of geometry column in new layer. Defaults to 'SHAPE'.
+
+
+ Name of the OID column to create. Defaults to 'OBJECTID'.
+
+
+ ESRI FileGDB
+
+
+ Cannot overwrite a OGR layer in place
+
+
+ Failed to transform, writing stopped. (Exception: %1)
+
+
+ Unable to load %1 provider
+
+
+ Provider %1 has no %2 method
+
+
+ Loaded from Provider
+
+
+ Loading of layer failed
+
+
+ Creation error for features from #%1 to #%2. Provider errors was:
+%3
+
+
+ Import was canceled at %1 of %2
+
+
+ Vector import
+
+
+ Only %1 of %2 features written.
+
+
+ Reading raster part %1 of %2
+
+
+ Building Pyramids...
+
+
+ Building pyramids failed - write access denied
+
+
+ Write access denied. Adjust the file permissions and try again.
+
+
+ Building pyramids failed.
+
+
+ The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
+
+
+ Building pyramid overviews is not supported on this type of raster.
+
+
+ Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
+
+
+ Multiband color
+
+
+ Paletted
+
+
+ Singleband gray
+
+
+ Singleband pseudocolor
+
+
+ Singleband color data
+
+
+ All Ramps
+
+
+ Single Symbol
+
+
+ Categorized
+
+
+ Graduated
+
+
+ Rule-based
+
+
+ Point displacement
+
+
+ Inverted polygons
+
+
+ Simple line
+ Энгийн шулуун
+
+
+ Marker line
+
+
+ Simple marker
+
+
+ SVG marker
+
+
+ Font marker
+
+
+ Ellipse marker
+
+
+ Vector Field marker
+
+
+ Simple fill
+
+
+ Gradient fill
+
+
+ Shapeburst fill
+
+
+ SVG fill
+
+
+ Centroid fill
+
+
+ Line pattern fill
+
+
+ Point pattern fill
+
+
+ Where is '%1' (original location: %2)?
+ '%1' Хаана байна (эх байрлал нь: %2)?
+
+
+ QGIS rocks!
+
+
+ <html>QGIS rocks!</html>
+
+
+ Raster Histogram
+
+
+ Pixel Value
+
+
+ Frequency
+
+
+ Internal Compass
+
+
+ Shows a QtSensors compass reading
+
+
+ Version 0.9
+
+
+ Coordinate Capture
+ Солбицлын утгыг авах
+
+
+ Capture mouse coordinates in different CRS
+
+
+ Vector
+
Version 0.1
@@ -9045,38 +9767,148 @@ qgis.utils.iface-ийг ашигла.
Version 0.2
Хувилбар 0.2
-
- Loads and displays delimited text files containing x,y coordinates
- x, y солбицол агуулсан текст ажлыг дуудаж дэлгэцэнд харуулах
-
Layers
-
- Add Delimited Text Layer
- Зааглагдсан Текстэн Давхарга Нэмэх
+ Dxf2Shp Converter
+ Dxf2Shp Хөрвүүлэгч
+
+
+ Converts from dxf to shp file format
+ dxf-ээс shp өргөтгөл рүү хөрвүүлэгч
+
+
+ eVis
+ eVis
+
+
+ An event visualization tool - view images associated with vector features
+
+
+ Database
+ Өгөгдлийн сан
+
+
+ Version 1.1.0
+ Хувилбар 1.1.0
+
+
+ Warning
+ Анхааруулга
+
+
+ This tool only supports vector data
+ Энэ хэрэгсэл нь зөвхөн Вектор өгөдөлд зориулагдсан
+
+
+ No active layers found
+ Идэвхтэй давхарга олдсонгүй
+
+
+ Georeferencer GDAL
+ Орон зайн холболт хийгч GDAL
+
+
+ Georeferencing rasters using GDAL
+ GDAL ашиглан растерт орон зайн холболт хийх
+
+
+ Raster
+
+
+ Could not reproject view extent: %1
+
+
+ Could not reproject layer extent: %1
+
+
+ Version 3.1.9
+ Хувилбар 3.1.9
Fit to a linear transform requires at least 2 points.
-
Fit to a Helmert transform requires at least 2 points.
-
Fit to an affine transform requires at least 4 points.
-
Fitting a projective transform requires at least 4 corresponding points.
-
+
+ Globe
+
+
+ Overlay data on a 3D globe
+
Tools for loading and importing GPS data
GPS-ийн өгөгдлийг унших, оруулж ирэх хэрэгсэл
+
+ Location: %1
+ Байрлал: %1
+
+
+ Location: %1<br>Mapset: %2
+ Байрлал: %1<br>Mapset: %2
+
<b>Raster</b>
@@ -9273,14 +10116,6 @@ qgis.utils.iface-ийг ашигла.
Driver
Драйвэр
-
- Database
- Өгөгдлийн сан
-
Table
@@ -9294,12 +10129,12 @@ qgis.utils.iface-ийг ашигла.
<b>Region</b>
-
Cannot open region header
-
Depths
-
E-W 3D resolution
-
N-S 3D resolution
-
GRASS давхарга
- NorthArrow
- Хойд Зүг тэмдэг
+ Heatmap
+
- Displays a north arrow overlayed onto the map
- Зүг чигийн тэмдэгийг дэлгэцэнд харуулах
-
-
- ScaleBar
- Масштабын шугам
-
-
- Draws a scale bar
- Масштабын шугам зурах
-
-
- SPIT
- SPIT
-
-
- Shapefile to PostgreSQL/PostGIS Import Tool
- PostgreSQL/PostGIS руу Shapefile оруулах хэрэгсэл
-
-
- WFS plugin
- WFS өргөтгөл
-
-
- Adds WFS layers to the QGIS canvas
- QGIS-т WFS давхарга нэмэх
-
-
- GPS eXchange format provider
-
-
- GRASS plugin
- GRASS Хэрэгсэл
-
-
- QGIS couldn't find your GRASS installation.
-Would you like to specify path (GISBASE) to your GRASS installation?
- QGIS нь GRASS-ийн суусан хавтасыг олсонгүй.
-Замыг зааж өгөх үү?
-
-
- Choose GRASS installation path (GISBASE)
- GRASS суусан замыг сонго (GISBASE)
-
-
- GRASS data won't be available if GISBASE is not specified.
- GISBASE-ийн замыг зааж өгөхгүй бол GRASS-ийн мэдээг унших боломжгүй.
-
-
- Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
-
- GISBASE is not set.
- GISBASE тодорхойлогдоогүй.
-
-
- Mapset is already in use.
- Mapset аль хэдийн ачаалагдсан байна.
-
-
- Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
-
- Cannot open vector %1 in mapset %2
-
-
- Cannot open GISRC file
-
-
- Cannot start module
- Модулыг эхлээлэх боломжгүй
-
-
- command: %1 %2
- команд: %1 %2
-
-
- Cannot run module
-
-
- command: %1 %2<br>%3<br>%4
- команд: %1 %2<br>%3<br>%4
-
-
- Cannot get projection
- Тусгагийг авах боломжгүй
-
-
- Cannot get raster extent
-
-
- Cannot get map info
- Зургийн мэдээллийг унших боломжгүй
-
-
- Cannot get colors
- Өнгөнүүдийг унших боломжгүй
-
-
- Cannot query raster
-
-
- Warning
- Анхааруулга
-
-
- This tool only supports vector data
- Энэ хэрэгсэл нь зөвхөн Вектор өгөдөлд зориулагдсан
-
-
- No active layers found
- Идэвхтэй давхарга олдсонгүй
-
-
- Cannot read raster map region
-
-
- Cannot read vector map region
-
-
- Cannot read region
-
-
- Abort
- Таслах
-
-
- The extra plugin path '%1' does not exist !
-
-
- Couldn't load SIP module.
- SIP модулыг ачааллах боломжгүй.
-
-
- Python support will be disabled.
- Python идэвхгүй болох болно.
-
-
- Couldn't set SIP API versions.
-
-
- Couldn't load PyQt4.
- PyQt4 ачаалагдах боломжгүй.
-
-
- Couldn't load PyQGIS.
- PyQGIS ачаалагдах боломжгүй.
-
-
- Couldn't load QGIS utils.
- QGIS-ийн хэрэгслүүд ачаалагдах боломжгүй.
-
-
- Python version:
- Python хувилбар:
-
-
- QGIS version:
- QGIS хувилбар:
-
-
- Python path:
- Python зам:
-
-
- An error occured during execution of following code:
- Дараах кодыг гүйцэтгэх явцад алдаа гарлаа:
-
-
- Coordinate Capture
- Солбицлын утгыг авах
-
-
- Capture mouse coordinates in different CRS
-
-
- Vector
- Вестор
-
-
- Dxf2Shp Converter
- Dxf2Shp Хөрвүүлэгч
-
-
- Converts from dxf to shp file format
- dxf-ээс shp өргөтгөл рүү хөрвүүлэгч
-
-
- Interpolating...
- Интерполяц хийж байна...
+ Creates a Heatmap raster for the input point vector
+
Хувилбар 0.001
- Python is not enabled in QGIS.
- OfflineEditing
+
- Plugins
-
-
- Plugin "%1" is not compatible with this version of QGIS.
-It will be disabled.
-
-
- Loaded %1 (package: %2)
-
-
- Library name is %1
-
- Номын сангийн нэр нь %1
-
-
- Failed to load %1 (Reason: %2)
-
-
- Attempting to resolve the classFactory function
-
-
-
- Loaded %1 (Path: %2)
-
-
- Error Loading Plugin
- Хэрэгсэл Ачаалахад Алдаа
-
-
- There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
-%1.
- Хэрэгсэлийг ачааллахад алдаа гарлаа. Дараах алдааны мэдээлэл энэ алдааг засахад нэмэр болж магадгүй:
-%1.
-
-
- Unable to find the class factory for %1.
-
-
- Plugin %1 did not return a valid type and cannot be loaded
-
-
- Where is '%1' (original location: %2)?
- '%1' Хаана байна (эх байрлал нь: %2)?
-
-
- Error when reading metadata of plugin %1
- %1 хэрэгслийн мета өгөгдлийг уншихад алдаа гарлаа
-
-
- No QGIS data provider plugins found in:
-%1
-
-
-
- Location: %1
- Байрлал: %1
-
-
- Location: %1<br>Mapset: %2
- Байрлал: %1<br>Mapset: %2
-
-
- Couldn't open the data source: %1
- Өгөгдлийн эхийг нээх боломжгүй: %1
-
-
- Parse error at line %1 : %2
-
-
- %1 is not a GRASS mapset.
-
-
- Cannot start %1/etc/lock
-
-
- Temporary directory %1 exists but is not writable
-
-
- Cannot create temporary directory %1
-
-
- Cannot create %1
- %1-ийг үүсгэх боломжгүй
-
-
- Cannot remove mapset lock: %1
-
-
- Georeferencer GDAL
- Орон зайн холболт хийгч GDAL
-
-
- Georeferencing rasters using GDAL
- GDAL ашиглан растерт орон зайн холболт хийх
-
-
- Raster
- Растер
-
-
- Could not reproject view extent: %1
-
-
- Could not reproject layer extent: %1
-
-
- Version 3.1.9
- Хувилбар 3.1.9
+ Allow offline editing and synchronizing with database
+
Access Oracle Spatial GeoRaster
Oracle-ийн Spatial GeoRaster дуудах
-
- Deleted vertices
- Устгагдсан оройн цэгүүд
-
-
- Moved vertices
- Зөөгдсөн оройн цэгүүд
-
-
- eVis
- eVis
-
-
- An event visualization tool - view images associated with vector features
-
-
- Version 1.1.0
- Хувилбар 1.1.0
-
-
- Building triangulation...
- Гурвалжлал байгуулж байна...
-
-
- Estimating normal derivatives...
-
-
- Could not open CRS database %1
-Error(%2): %3
-
-
- CRS
-
-
- Generated CRS
- A CRS automatically generated from layer info get this prefix for description
-
-
- Saved user CRS [%1]
-
-
- Imported from GDAL
-
Raster Terrain Analysis plugin
-
A plugin for raster based terrain analysis
-
- infinite
- Road graph plugin
+
- W
- Б
-
-
- E
- З
-
-
- S
- Ө
-
-
- N
- Х
-
-
- Version 0.0.1
- Хувилбар 0.0.1
-
-
- Single Symbol
- Нэг Тэмдэг
-
-
- Categorized
-
-
- Graduated
-
-
- Rule-based
-
-
- Point displacement
-
-
- Inverted polygons
-
-
- invalid line
-
-
- segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
-
-
- ring %1 with less than four points
-
-
- ring %1 not closed
-
-
- line %1 with less than two points
-
-
- line %1 contains %n duplicate node(s) at %2
- number of duplicate nodes
-
-
-
-
- segments %1 and %2 of line %3 intersect at %4
-
-
- ring %1 of polygon %2 not in exterior ring
-
-
- GEOS error:could not produce geometry for GEOS (check log window)
-
-
- GEOS error:%1
-
-
- polygon %1 has no rings
-
-
- polygon %1 inside polygon %2
-
-
- Unknown geometry type
- Геометрийн төрөл мэдэгдэхгүй
-
-
- Unknown geometry type %1
-
-
- Geometry validation was aborted.
-
-
- Geometry is valid.
-
-
- Geometry has %1 errors.
-
-
- OGR driver for '%1' not found (OGR error: %2)
-
-
- trimming attribute name '%1' to ten significant characters produces duplicate column name.
-
-
- creation of data source failed (OGR error:%1)
-
-
- creation of layer failed (OGR error:%1)
-
-
- unsupported type for field %1
-
-
- no available replacement for internal fieldname ogc_fid found
-
-
- Reserved attribute name ogc_fid replaced with %1
-
-
- creation of field %1 failed (OGR error: %2)
-
-
- created field %1 not found (OGR error: %2)
-
-
- New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
-
- BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
-
- The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
-
- Limit the number of coordinate pairs per line in multiline format.
-
-
- Set the number of decimal for coordinates. Default value is 10.
-
-
- By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
-
- Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
-
- Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
-
- Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
-
- set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
-
- Set to YES to resize fields to their optimal size.
-
-
- DBF File
-
-
- Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
-
- Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
-
- whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
-
- The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
-
- If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
-
- If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
-
- XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
-
- Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
-
- This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
-
- This is the prefix for the application target namespace.
-
-
- Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
-
- Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
-
- If not specified, GML2 will be used.
-
-
- only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
-
- only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
-
- Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
-
- By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
-
- By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
-
- If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
-
- Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
-
- Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
-
- By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
-
- Allows you to specify the field to use for the KML <name> element.
-
-
- Allows you to specify the field to use for the KML <description> element.
-
-
- Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
-
- Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
-
- Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
-
- Override the seed file to use.
-
-
- Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
-
- Indicates whether the color table should be copied from the seed file.
-
-
- Override the master unit name from the seed file with the provided one or two character unit name.
-
-
- Override the sub unit name from the seed file with the provided one or two character unit name.
-
-
- Override the number of subunits per master unit. By default the seed file value is used.
-
-
- Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
-
- ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
-
- Should update files be incorporated into the base data on the fly.
-
-
- Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
-
- Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
-
- If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
-
- Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
-
- Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
-
- Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
-
- Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
-
- Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
-
- Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
-
- column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
-
- By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
-
- Field separator character.
-
-
- Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
-
- Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
-
- Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
-
- If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
-
- If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
-
- Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
-
- Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
-
- When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
-
- Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
-
- Name of the OID column to create. Defaults to 'OBJECTID'.
-
-
- Invalid variant type for field %1[%2]: received %3 with type %4
-
-
- Feature geometry not imported (OGR error: %1)
-
-
- Feature creation error (OGR error: %1)
-
-
- Cannot overwrite a OGR layer in place
-
-
- Feature write errors:
-
-
- Stopping after %1 errors
-
-
-
-Only %1 of %2 features written.
-
-
- Arc/Info ASCII Coverage
-
-
- Atlas BNA
-
-
- Comma Separated Value
-
-
- ESRI Shapefile
-
-
- DBF file
-
-
- FMEObjects Gateway
-
-
- By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
-
- GeoJSON
- GeoJSON
-
-
- GeoRSS
- GeoRSS
-
-
- Geography Markup Language [GML]
- Geography Markup Language [GML]
-
-
- Generic Mapping Tools [GMT]
-
-
- GPS eXchange Format [GPX]
-
-
- Keyhole Markup Language [KML]
-
-
- Mapinfo TAB
-
-
- Mapinfo MIF
-
-
- Spatial Data Transfer Standard [SDTS]
-
-
- SpatiaLite
-
-
- ESRI FileGDB
-
-
- Failed to transform, writing stopped. (Exception: %1)
-
-
- INTERLIS 1
- INTERLIS 1
-
-
- Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
-
-
- INTERLIS 2
- INTERLIS 2
-
-
- Mapinfo File
-
-
- Microstation DGN
- Microstation DGN
-
-
- S-57 Base file
-
-
- SQLite
- SQLite
-
-
- AutoCAD DXF
- AutoCAD DXF
-
-
- Geoconcept
-
-
- Cannot draw raster
-
-
- To select features, choose a vector layer in the legend
-
-
- QGIS rocks!
-
-
- <html>QGIS rocks!</html>
- It solves the shortest path problem.
+
Processing 1/2 - %p%
-
Processing 2/2 - %p%
-
Is disjoint
-
Spatial Query Plugin
-
A plugin that makes spatial queries on vector layers
-
- minidump written to %1
- SPIT
+ SPIT
- writing of minidump to %1 failed (%2)
- Shapefile to PostgreSQL/PostGIS Import Tool
+ PostgreSQL/PostGIS руу Shapefile оруулах хэрэгсэл
- creation of minidump to %1 failed (%2)
- SQL Anywhere plugin
+
- Crash dumped
- Store vector layers within a SQL Anywhere database
+
- QGIS starting in non-interactive mode not supported.
-You are seeing this message most likely because you have no DISPLAY environment variable set.
-
- Zonal statistics plugin
+
- Simple line
- Энгийн шулуун
+ A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
+
- Marker line
- Cannot open GDAL MEM dataset %1: %2
+
- Simple marker
- Cannot GDALCreateGenImgProjTransformer:
+
- SVG marker
- Cannot inittialize GDALWarpOperation :
+
- Font marker
- Cannot ChunkAndWarpImage: %1
+
- Ellipse marker
- GDAL/OGR VSIFileHandler
+
- Vector Field marker
- This raster file has no bands and is invalid as a raster layer.
+ Растер ажил нь суваггүй байгаа растер давхарга хүчингүй.
- Simple fill
- Cannot get GDAL raster band: %1
+
- Gradient fill
- Nearest Neighbour
+
- Shapeburst fill
- Average
+
- SVG fill
- Gauss
+
- Centroid fill
- Cubic
+
- Line pattern fill
- Mode
+
- Point pattern fill
- None
+
- No active vector layer
- Couldn't open the data source: %1
+ Өгөгдлийн эхийг нээх боломжгүй: %1
- CRS Exception
- Parse error at line %1 : %2
+
- Selection extends beyond layer's coordinate system.
- GPS eXchange format provider
+
- Raster Histogram
- GRASS plugin
+ GRASS Хэрэгсэл
- Pixel Value
- QGIS couldn't find your GRASS installation.
+Would you like to specify path (GISBASE) to your GRASS installation?
+ QGIS нь GRASS-ийн суусан хавтасыг олсонгүй.
+Замыг зааж өгөх үү?
- Frequency
- Choose GRASS installation path (GISBASE)
+ GRASS суусан замыг сонго (GISBASE)
- OfflineEditing
- GRASS data won't be available if GISBASE is not specified.
+ GISBASE-ийн замыг зааж өгөхгүй бол GRASS-ийн мэдээг унших боломжгүй.
- Allow offline editing and synchronizing with database
- Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
+
- Road graph plugin
- GISBASE is not set.
+ GISBASE тодорхойлогдоогүй.
- It solves the shortest path problem.
- %1 is not a GRASS mapset.
+
+
+ Cannot start %1/etc/lock
+
+
+ Mapset is already in use.
+ Mapset аль хэдийн ачаалагдсан байна.
+
+
+ Temporary directory %1 exists but is not writable
+
+
+ Cannot create temporary directory %1
+
+
+ Cannot create %1
+ %1-ийг үүсгэх боломжгүй
+
+
+ Cannot remove mapset lock: %1
+
+
+ Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
+
+
+ Cannot open vector %1 in mapset %2
+
+
+ Cannot read raster map region
+
+
+ Cannot read vector map region
+
+
+ Cannot read region
+
+
+ Cannot open GISRC file
+
+
+ Cannot start module
+ Модулыг эхлээлэх боломжгүй
+
+
+ command: %1 %2
+ команд: %1 %2
+
+
+ Cannot run module
+
+
+ command: %1 %2<br>%3<br>%4
+ команд: %1 %2<br>%3<br>%4
+
+
+ Cannot get projection
+ Тусгагийг авах боломжгүй
+
+
+ Cannot get raster extent
+
+
+ Cannot get map info
+ Зургийн мэдээллийг унших боломжгүй
+
+
+ Cannot get colors
+ Өнгөнүүдийг унших боломжгүй
+
+
+ Cannot query raster
+
+
+ Cannot draw raster
+
+
+ Loading of the MSSQL provider failed
+
+
+ Unsupported type for field %1
+
+
+ Creation of fields failed
+
OGR[%1] error %2: %3
-
-
- OGR
-
Unable to create the datasource. %1 exists and overwrite flag is false.
-
Unable to get driver %1
-
Arc/Info Binary Coverage
-
DODS
DODS
+
+ OpenFileGDB
+
GeoPackage
-
Informix DataBlade
Informix DataBlade
-
- INGRES
- INGRES
-
Ingres
-
+
+ Mapinfo File
+
MSSQL
-
OGDI Vectors
OGDI Вектор
-
- OpenFileGDB
-
PostgreSQL
@@ -11117,17 +10721,17 @@ You are seeing this message most likely because you have no DISPLAY environment
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
Duplicate field (10 significant characters): %1
-
Creating the data source %1 failed: %2
-
Unknown vector type of %1
-
Creation of OGR data source %1 failed: %2
-
field %1 with unsupported type %2 skipped
-
creation of field %1 failed
-
Couldn't create file %1.qpj
-
- Cannot get GDAL raster band: %1
- Fetching features failed.
+SQL:%1
+Error: %2
+
- Cannot open GDAL MEM dataset %1: %2
-
-
- Cannot GDALCreateGenImgProjTransformer:
-
-
- Cannot inittialize GDALWarpOperation :
-
-
- Cannot ChunkAndWarpImage: %1
-
-
- [GDAL] All files (*)
- [GDAL] Бүгд (*)
-
-
- GDAL/OGR VSIFileHandler
-
-
- This raster file has no bands and is invalid as a raster layer.
- Растер ажил нь суваггүй байгаа растер давхарга хүчингүй.
-
-
- Nearest Neighbour
- Ойрын Хөрш
-
-
- Average
- Дундаж
-
-
- Gauss
-
-
- Cubic
- Шоон
-
-
- Mode
- Горим
-
-
- None
-
-
- second
- Note: Word is part matched in code
- секунд
-
-
- hour
- Note: Word is part matched in code
- цаг
-
-
- Cannot convert '%1' to double
-
-
- Cannot convert '%1' to int
-
-
- Cannot convert '%1' to DateTime
-
-
- Cannot convert '%1' to Date
-
-
- Cannot convert '%1' to Time
-
-
- Cannot convert '%1' to Interval
-
-
- Cannot convert '%1' to boolean
-
-
- Domain max must be greater than domain min
-
-
- Exponent must be greater than 0
-
-
- Invalid regular expression '%1': %2
-
-
- Index is out of range
-
-
- Cannot convert '%1:%2:%3' to color
-
-
- Cannot convert '%1:%2:%3:%4' to color
-
-
- "%1" is not a valid color ramp
-
-
- Cannot convert '%1:%2:%3:%4:%5' to color
-
-
- function help for %1 missing
-
-
- Operators
- Оператор
-
-
- Fields and Values
-
-
- Math
-
-
- Conversions
-
-
- Conditionals
-
-
- second|seconds
- list of words separated by | which reference years
-
-
- minute|minutes
- list of words separated by | which reference minutes
-
-
- hour|hours
- list of words separated by | which reference minutes hours
-
-
- day|days
- list of words separated by | which reference days
-
-
- week|weeks
- wordlist separated by | which reference weeks
-
-
- month|months
- list of words separated by | which reference months
-
-
- year|years
- list of words separated by | which reference years
-
-
- Date and Time
-
-
- String
-
-
- Color
- Өнгө
-
-
- Geometry
- Геометр
-
-
- Record
-
-
- No root node! Parsing failed?
-
-
- (no root)
-
-
- Unary minus only for numeric values.
-
-
- Can't preform /, *, or % on DateTime and Interval
-
-
- [unsupported type;%1; value:%2]
-
-
- Column '%1' not found
-
-
- Globe
- Глоб
-
-
- Overlay data on a 3D globe
- 3-н хэмжээт глоб дээр өгөгдөл нэсэх
-
-
- Zonal statistics plugin
-
-
- A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
-
-
- Unable to load %1 provider
-
-
- Provider %1 has no %2 method
-
-
- Loaded from Provider
-
-
- Loading of layer failed
-
-
- Creation error for features from #%1 to #%2. Provider errors was:
-%3
-
-
- Import was canceled at %1 of %2
-
-
- Vector import
-
-
- Only %1 of %2 features written.
- Oracle
+
Connection to database failed
-
No owner name found
-
Creation of data source %1 failed:
%2
-
Loading of the layer %1 failed
-
Field name clash found (%1 not remappable)
-
%1 not owner of the table %2.
-
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Unable to delete layer %1.%2:
%3
-
Unable to clean metadata %1.%2:
%3
-
+
+ no result buffer
+
+
+ Fetching from cursor %1 failed
+Database error: %2
+
+
+ PostGIS
+
+
+ Infinite filter rectangle specified
+
Unable to delete layer %1:
%2
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
Save style in database
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
- Loading of the MSSQL provider failed
- SQLite error: %2
+SQL: %1
+
- Unsupported type for field %1
-
-
- Creation of fields failed
- SQLite error getting feature: %1
+
creation of data source %1 failed. %2
-
loading of the layer %1 failed
-
creation of fields failed
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
- Шинэ өгөгдлийн сан үүсгэх боломжгүй
+
Unable to activate FOREIGN_KEY constraints [%1]
-
Unable to delete table %1
-
+
+ Unable to delete table %1:
+
+
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
- Unable to activate FOREIGN_KEY constraints
- FOREIGN_KEY идэвхжүүлэх боломжгүй
+ The extra plugin path '%1' does not exist !
+
- Unable to delete table %1:
-
- Couldn't load SIP module.
+ SIP модулыг ачааллах боломжгүй.
- no result buffer
- Python support will be disabled.
+ Python идэвхгүй болох болно.
- Internal Compass
- Couldn't set SIP API versions.
+
- Shows a QtSensors compass reading
- Couldn't load PyQt4.
+ PyQt4 ачаалагдах боломжгүй.
- Version 0.9
- Хувилбар 0.9
+ Couldn't load PyQGIS.
+ PyQGIS ачаалагдах боломжгүй.
- Heatmap
- Couldn't load QGIS utils.
+ QGIS-ийн хэрэгслүүд ачаалагдах боломжгүй.
- Creates a Heatmap raster for the input point vector
- An error occured during execution of following code:
+ Дараах кодыг гүйцэтгэх явцад алдаа гарлаа:
- Exception: %1
- Python version:
+ Python хувилбар:
- GEOS
- QGIS version:
+ QGIS хувилбар:
- GEOS prior to 3.2 doesn't support GEOSInterpolate
- Python path:
+ Python зам:
- Console
-
-
- Reading raster part %1 of %2
-
-
- Building Pyramids...
-
-
- Building pyramids failed - write access denied
-
-
- Write access denied. Adjust the file permissions and try again.
-
-
- Building pyramids failed.
- Пирамид байгуулах бүтэлгүйтэв.
-
-
- The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
-
- Building pyramid overviews is not supported on this type of raster.
- Энэ төрлийн растерт пирамид байгуулах үзүүлбэр боломжгүй.
-
-
- Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
-
- Multiband color
-
-
- Paletted
-
-
- Singleband gray
-
-
- Singleband pseudocolor
-
-
- Singleband color data
- Python error
+ Пайтон алдаа
Undefined
-
Hidden
- Далд
+
Title
- Гарчиг
+
Group
-
Subgroup
-
Symbol
- Тэмдэг
+
Symbol label
-
-
- All Ramps
-
Topology Checker
-
A Plugin for finding topological errors in vector layers
-
Using fix %1.
-
Topology plugin
-
intersecting geometries
-
features too close
-
point not covered by segment
-
segment too short
-
invalid geometry
-
dangling end
-
duplicate geometry
-
pseudo node
-
overlaps
-
gaps
-
point not covered
-
line ends not covered by point
-
point not in polygon
-
polygon does not contain point
-
multipart feature
-
- Fetching features failed.
-SQL:%1
-Error: %2
- Error describing bind parameters
+
- Oracle
-
-
- Fetching from cursor %1 failed
-Database error: %2
-
-
- PostGIS
-
-
- Infinite filter rectangle specified
-
-
- SQLite error: %2
-SQL: %1
-
-
- SQLite error getting feature: %1
- Error binding parameters
+
Save style to DB (%1)
-
Could not save symbology because:
%1
-
Attribute index %1 out of bounds [0;%2]
-
Error
- Алдаа
+
Layer
- Давхарга
+
Feature ID
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
-
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- Томъёолсон тэмдэг
+
QSpatiaLiteDriver
- Error opening database
-
- Error closing database
-
- Unable to begin transaction
-
- Unable to commit transaction
-
- Unable to rollback transaction
-
@@ -12321,37 +11445,37 @@ Response was:
Unable to fetch row
-
No query
-
- Unable to execute statement
-
- Unable to execute multiple statements at a time
-
- Unable to reset statement
-
- Unable to bind parameters
-
- Parameter count mismatch
-
@@ -12364,72 +11488,72 @@ Response was:
Invalid file descriptor (port was not opened correctly)
-
Unable to allocate memory tables (POSIX)
-
Caught a non-blocked signal (POSIX)
-
Operation timed out (POSIX)
-
The file opened by the port is not a valid device
-
The port detected a break condition
-
The port detected a framing error (usually caused by incorrect baud rate settings)
-
There was an I/O error while communicating with the port
-
Character buffer overrun
-
Receive buffer overflow
-
The port detected a parity error in the received data
-
Transmit buffer overflow
-
General read operation failure
-
General write operation failure
-
QgisApp
- Version
- Хувилбар
+ &Raster
+ &Растер
- Invalid Data Source
- Өгөгдлийн эх буруу
+ Multiple Instances of QgisApp
+
- Vector
- Вестор
-
-
- Please select a vector layer first.
- Эхлээд вектор давхаргыг сонгоно уу.
-
-
- No Layer Selected
- Сонгогдсон давхарга байхгүй байна
-
-
- Not enough features selected
- Хангалттай обьект сонгогдоогүй байна
-
-
- Union operation canceled
-
-
- No legend entries selected
-
-
- Select the layers and groups you want to remove in the legend.
-
-
- Remove layers and groups
-
-
- Remove %n legend entries?
- number of legend items to remove
-
-
-
-
- %n legend entries removed.
- number of removed legend entries
-
-
-
-
- %1 (%2 type unsupported)
-
-
- There is a new version of QGIS available
- QGIS-ийн шинэ хувилбар гарлаа
-
-
- You are running a development version of QGIS
- QGIS-ийн хөгжүүлэх хувилбарыг ажиллуулж байна
-
-
- You are running the current version of QGIS
- QGIS-ийн одоохи хувилбарыг ажиллуулж байна
-
-
- Would you like more information?
- Та илүү мэдээлэл авмаар байна уу?
-
-
- QGIS Version Information
- QGIS Хувилбарын Мэдээлэл
-
-
- Unable to get current version information from server
- Серверээс хувилбарын мэдээлэл авч болохгүй нь
-
-
- Connection refused - server may be down
- Холболт цуцлагдлаа - сервер унтарсан байх
-
-
- QGIS server was not found
- QGIS сервер олдсонгүй
-
-
- Do you want to save the current project? %1
-
-
- Invalid Layer
- Буруу Давхарга
-
-
- %1 is an invalid layer and cannot be loaded.
- %1 тодорхойгүй давхарга тул ачаалагдахгүй.
-
-
- Problem deleting features
- Объект устгахад асуудалтай
-
-
- A problem occured during deletion of features
- Объектийг устгах явцад асуудал үүслээ
-
-
- No Vector Layer Selected
- Вектор Давхарга Сонгоогүй байна
-
-
- Deleting features only works on vector layers
- Вектор давхарга дээр л объект устгаж болно
-
-
- To delete features, you must select a vector layer in the legend
- Объектийг устгахын тулд вектор давхарга сонгох хэрэгтэй
-
-
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
- Зургийн тавцанд нээгдсэн бүх давхаргын жагсаалт. Давхаргыг идэвхжүүлэх, эс идэвхжүүлэхдээ нэр дээр нь товш. Давхаргыг дэлгэцэнд харуулах, ажиллахын тулд угсраа товшилт хий.
-
-
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
- Зураг заах тавцан. Энэ тавцанд тухайн үед дэлгэцэнд үзүүлсэн зургийн заагуур гарна. Одоо хэрэглэгдэж байгаа нь улаан тэгш өнцөгтөөр ялгагдана. Ямар ч давхаргыг зураг заах тавцанд нэмж оруулж болно.
-
-
- Map canvas. This is where raster and vector layers are displayed when added to the map
- Зургийн тавцан. Растер, вектор давхаргыг зурагт нэмэх, харах тавцан
-
-
- &Plugins
- &Өргөтгөл
-
-
- Progress bar that displays the status of rendering layers and other time-intensive operations
- Орлуулах давхарга ба хугацаа шаардах үйлдлийн төлвийг үзүүлэх хөвөгч
-
-
- Displays the current map scale
- Тухайн зургийн хэмжээс
-
-
- Render
- Орлуулга
-
-
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
- Шалгах явцад зургийн навигацийн команд ба бусад үйлдлээр зургийн давхарга нь орлуулга болно. Шалгалтгүй бол орлуулга байхгүй. Энэ нь орлуулгаас өмнө олон тооны давхарга нэмэх, тэмдэглэх боломж олгоно.
-
-
- Choose a QGIS project file
- QGIS төслийн ажил сонгох
-
-
- Toggle map rendering
- Сэлгээний зургаар орлуулах
-
-
- QGIS Project Read Error
- QGIS Төсөл Унших Алдаа
-
-
- Open a GDAL Supported Raster Data Source
- GDAL ДэмждэгРастер Өгөгдлийг Нээх
-
-
- Save As
- Өөрөөр хадгалах
-
-
- Choose a QGIS project file to open
- Нээх QGIS төслийн ажлыг сонгох
+ Checking database
+ Өгөгдлийн санг шалгах
GUI-ийг тохируулах
- Checking database
- Өгөгдлийн санг шалгах
-
-
- Quantum GIS
- Quantum GIS
+ Map canvas. This is where raster and vector layers are displayed when added to the map
+
Browser
- Браузер
+
Browser (2)
-
+
+ GPS Information
+ GPS Мэдээлэл
+
+
+ Log Messages
+
+
+ QGIS starting...
+
+
+ Checking provider plugins
+
+
+ Starting Python
+ Пайтон эхлүүлэх
QGIS ажиллахад бэлэн!
- &New Project
- &Шинэ төсөл
+ Minimize
+
- Ctrl+N
- New Project
- Ctrl+N
+ Ctrl+M
+ Minimize Window
+ Ctrl+M
- New Project
- Шинэ Төсөл
+ Minimizes the active window to the dock
+
- &Open Project...
- &Төсөл Нээх...
+ Zoom
+ Өсгөх
- Ctrl+O
- Open a Project
- Ctrl+O
+ Toggles between a predefined size and the window size set by the user
+
- Open a Project
- Нэг Төсөл Нээх
+ Bring All to Front
+
- &Save Project
- &Төсөл Хадгалах
+ Bring forward all open windows
+
- Ctrl+S
- Save Project
- Ctrl+S
+ Current Edits
+
- Save Project
- Төсөл Хадгалах
-
-
- Save Project &As...
- Төсөл Хадгалах &Нэр...
-
-
- Save Project under a new name
- Төслийг шинэ нэрээр Хадгалах
-
-
- Save as Image...
- Дүрсээр Хадгалах...
-
-
- Save map as image
- Зургийг дүрсээр хадгалах
-
-
- Exit
- Гарах
-
-
- Ctrl+Q
- Exit QGIS
- Ctrl+Q
-
-
- Exit QGIS
- QGIS-аас гарах
-
-
- Add a Vector Layer
- Нэг Вектор Давхарга Нэмэх
-
-
- Add a Raster Layer
- Нэг Растер Давхарга Нэмэх
-
-
- Add a PostGIS Layer
- Нэг PostGIS Давхарга Нэмэх
-
-
- Remove Layer
- Давхаргыг Арилгах
-
-
- Ctrl+D
- Remove a Layer
- Ctrl+D
-
-
- Remove a Layer
- Давхаргыг Арилгах
-
-
- Show all layers in the overview map
- Зургийн бүх давхаргыг үзүүлэх
-
-
- Remove All From Overview
- Үзүүлбэрээс Бүгд-ийг Арилгах
-
-
- Remove all layers from overview map
- Зургийн үзүүлбэрээс бүх давхаргыг арилгах
-
-
- Show All Layers
- Бүх Давхаргыг Үзүүлэх
-
-
- Show all layers
- Бүх давхаргыг үзүүлэх
-
-
- Hide All Layers
- Бүх Давхаргыг Далдлах
-
-
- Hide all layers
- Бүх давхаргыг далдлах
-
-
- Project Properties...
- Төслийн Үзүүлэлт...
-
-
- Set project properties
- Төслийн үзүүлэлтийг тохируулах
-
-
- Options...
- Хувилбарууд...
-
-
- Change various QGIS options
- QGIS-ийн янз бүрийн хувилбарыг өөрчлөх
-
-
- Help Contents
- Туслахын агуулга
-
-
- F1
- Help Documentation
- F1
-
-
- Help Documentation
- Туслах баримт бичиг
-
-
- Ctrl+H
- QGIS Home Page
- Ctrl+H
-
-
- QGIS Home Page
- QGIS Нүүр Хуудас
-
-
- About
- Тухай
-
-
- About QGIS
- QGIS-ийн тухай
-
-
- Check Qgis Version
- QGIS-ийн Хувилбарыг Шалгах
-
-
- Check if your QGIS version is up to date (requires internet access)
- Таны QGIS сүүлийн хувилбар мөн эсэхийг шалгах (Интернэт холболт хэрэгтэй)
-
-
- Refresh
- Шинэчлэх
-
-
- Ctrl+R
- Refresh Map
- Ctrl+R
-
-
- Refresh Map
- Зураг шинэчлэх
-
-
- Zoom In
- Томсгох
-
-
- Ctrl++
- Zoom In
- Ctrl++
-
-
- Zoom Out
- Багасгах
-
-
- Ctrl+-
- Zoom Out
- Ctrl+-
-
-
- Zoom Full
- Бүтэн хэмжээ
-
-
- Zoom to Full Extents
- Бүгдийг багтаах
-
-
- Pan Map
- Зураг бэлтгэх
-
-
- Pan the map
- Зураг бэлтгэх
-
-
- Zoom Last
- Сүүлийнхийг Багтаах
-
-
- Zoom to Last Extent
- Сүүлийн Хэсгийг Багтаах
-
-
- Zoom to Layer
- Давхаргаар Багтаах
-
-
- Identify Features
- Объект тодорхойлох
-
-
- Click on features to identify them
- Объект дээр товшиж тодорхойлох
-
-
- Select Features
- Объект сонгох
-
-
- Measure Line
- Шугам Хэмжих
-
-
- Measure a Line
- Нэг шугам хэмжих
-
-
- Measure Area
- Талбай Хэмжих
-
-
- Measure an Area
- Нэг Талбай Хэмжих
-
-
- Show Bookmarks
- Хавчуулга үзүүлэх
-
-
- New Bookmark...
- Шинэ хавчуулга...
-
-
- Ctrl+B
- New Bookmark
- Ctrl+B
-
-
- New Bookmark
- Шинэ Хавчуулга
-
-
- Add WMS/WMTS Layer...
- WMS давхарга нэмэх...
-
-
- Add current layer to overview map
- Тухайн давхаргыг зурагт нэмэх
-
-
- Open the plugin manager
- Өргөтгөлийн менежер нээх
-
-
- Capture Point
- Цэг Оруулах
-
-
- Capture Points
- Цэг Оруулах
-
-
- Capture Line
- Шугам Оруулах
-
-
- Capture Lines
- Шугам Оруулах
-
-
- Capture Polygon
- Полигон Оруулах
-
-
- Capture Polygons
- Полигон Оруулах
-
-
- Delete Selected
- Сонгосныг Хасах
-
-
- Add Vertex
- Оргил Нэмэх
-
-
- Delete Vertex
- Оргил Хасах
-
-
- Move Vertex
- Оргил Шилжүүлэх
-
-
- &File
- &Файл
-
-
- &Open Recent Projects
- &Сүүлийн төслийг нээх
-
-
- &View
- &Үзүүлбэр
-
-
- &Layer
- &Давхарга
-
-
- &Settings
- &Тохируулга
-
-
- &Help
- &Туслах
-
-
- File
- Файл
-
-
- Manage Layers
- Давхаргын удирдлага
-
-
- Help
- Туслах
-
-
- Digitizing
- Тоо болгох
-
-
- Map Navigation
- Зургийн навигаци
-
-
- Attributes
- Чанарын үзүүлэлт
-
-
- Plugins
- Хэрэгсэл
-
-
- Ready
- Бэлэн
-
-
- Unable to open project
- Төсөл нээгдэх боломжгүй
-
-
- Layer is not valid
- Давхарга хтодорхой бус
-
-
- The layer is not a valid layer and can not be added to the map
- Давхарга тодорхойгүй тул зурагт нэмж болохгүй
-
-
- Save?
- Хадгалах уу?
-
-
- Unsupported Data Source
- Дэмжигдэхгүй өгөгдлийн эх
-
-
- Enter a name for the new bookmark:
- Шинэ хавчуургын нэрийг оруулах:
-
-
- Error
Алдаа
- Unable to create the bookmark. Your user database may be missing or corrupted
- Хавчуулга үүсээгүй. Хэрэглэгчийн өгөгдлийн сан байхгүй эсвэл эвдэрсэн
-
-
- Cut Features
- Объектийг авах
-
-
- Cut selected features
- Сонгосон объектийг авах
-
-
- Copy Features
- Объектийг хувилах
-
-
- Copy selected features
- Сонгосон объектийг хувилах
-
-
- Paste Features
- Объект оруулах
-
-
- Paste selected features
- Сонгосон объект оруулах
-
-
- Ctrl+?
- Help Documentation (Mac)
- Ctrl+?
-
-
- Checking provider plugins
-
-
- Starting Python
- Пайтон эхлүүлэх
-
-
- Scale
- Масштаб
-
-
- Current map scale (formatted as x:y)
-
-
- Map coordinates at mouse cursor position
-
-
- Provider does not support deletion
- Нийлүүлэгч хасахыг дэмжихгүй
+ Failed to open Python console:
+
QGIS
-
Multiple instances of QGIS application object detected.
Please contact the developers.
-
QGIS - %1 ('%2')
-
- Data provider does not support deleting features
- Өгөгдөл нийлүүлэгч объект хасахыг дэмжихгүй
-
-
- Layer not editable
- Давхарга засварлагдах боломжгүй
-
-
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
- Энэ давхарга засагдахгүй. Тоонд оруулах багажийн жагсаалтаас 'Засвар эхлэх'-ийг сонго.
-
-
- Invalid scale
- Хүчингүй масштаб
-
-
- Do you want to save the current project?
- Одоогийн төслийг хадгалах уу?
-
-
- Current map scale
- Одоогийн зургийн масштаб
-
-
- Project file is older
-
-
- <tt>Settings:Options:General</tt>
- Menu path to setting options
-
-
- Warn me when opening a project file saved with an older version of QGIS
-
-
- Overview
- Ерөнхий тойм
-
-
- Multiple Instances of QgisApp
-
-
- Ctrl+X
- Ctrl+X
-
-
- Ctrl+C
- Ctrl+C
-
-
- Ctrl+J
- Zoom to Selection
- Ctrl+J
-
-
- Ctrl+D
- Remove Layer(s)
- Ctrl+D
-
-
- Minimize
-
-
- Ctrl+M
- Minimize Window
- Ctrl+M
-
-
- Minimizes the active window to the dock
-
-
- Zoom
- Өсгөх
-
-
- Toggles between a predefined size and the window size set by the user
-
-
- Bring All to Front
-
-
- Bring forward all open windows
-
-
- Current Edits
-
-
- Failed to open Python console:
-
-
- Panels
- Самбар
+
- Toolbars
-
- Measure
- Хэмжилт
+ Window
+
- New
- Шинэ
-
-
- &Window
- &Цонх
-
-
- &Database
&Өгөгдлийн сан
- Label
- Шошго
+ &Web
+
- Progress bar that displays the status of rendering layers and other time-intensive operations
+ Орлуулах давхарга ба хугацаа шаардах үйлдлийн төлвийг үзүүлэх хөвөгч
+
+
+ Toggle extents and mouse position display
-
- Coordinate:
Солбицол:
- Current map coordinate
Одоогийн зургийн солбицол
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
+
+
+ Current map coordinate (lat,lon or east,north)
+
+
+ Scale
+ Масштаб
+
+
+ Current map scale
+ Одоогийн зургийн масштаб
+
+
+ Displays the current map scale
+ Тухайн зургийн хэмжээс
+
+
+ Current map scale (formatted as x:y)
+
+
+ Render
+ Орлуулга
+
+
+ When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
+ Шалгах явцад зургийн навигацийн команд ба бусад үйлдлээр зургийн давхарга нь орлуулга болно. Шалгалтгүй бол орлуулга байхгүй. Энэ нь орлуулгаас өмнө олон тооны давхарга нэмэх, тэмдэглэх боломж олгоно.
+
+
+ Toggle map rendering
+ Сэлгээний зургаар орлуулах
+
+
+ This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
-
- CRS status - Click to open coordinate reference system dialog
-
- Compiled against GDAL/OGR
- Ready
+ Бэлэн
+
+
+ Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
+ Зураг заах тавцан. Энэ тавцанд тухайн үед дэлгэцэнд үзүүлсэн зургийн заагуур гарна. Одоо хэрэглэгдэж байгаа нь улаан тэгш өнцөгтөөр ялгагдана. Ямар ч давхаргыг зураг заах тавцанд нэмж оруулж болно.
+
+
+ Overview
+ Ерөнхий тойм
+
+
+ Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
+ Зургийн тавцанд нээгдсэн бүх давхаргын жагсаалт. Давхаргыг идэвхжүүлэх, эс идэвхжүүлэхдээ нэр дээр нь товш. Давхаргыг дэлгэцэнд харуулах, ажиллахын тулд угсраа товшилт хий.
+
+
+ Layers
+ Давхаргууд
+
+
+ Map layer list that displays all layers in drawing order.
+
+
+ Layer order
+
+
+ Private qgis.db
+
+
+ < Blank >
+
+
+ QGIS version
+ GWT Хувилбар
+
+
+ QGIS code revision
+
Compiled against Qt
+
+
+ Running against Qt
+
+
+ Compiled against GDAL/OGR
+
+
+ Running against GDAL/OGR
-
- PostgreSQL Client Version
+
+
+ No support.
+
+
+ SpatiaLite Version
+ SpatiaLite Хувилбар
+
+
+ QWT Version
+ GWT Хувилбар
+
+
+ PROJ.4 Version
-
- QScintilla2 Version
+
+
+ This copy of QGIS writes debugging output.
+
+
+ %1 doesn't have any layers
+ %1 ямарч давхарга бахйгүй байна
+
+
+ Invalid Data Source
+ Өгөгдлийн эх буруу
+
+
+ %1 is not a valid or recognized data source
+
+
+ Vector
+
+
+ PostgreSQL
+ PostgreSQL
+
+
+ Cannot get PostgreSQL select dialog from provider.
+
+
+ %1 is an invalid layer - not loaded
+
+
+ %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
+
+
+ QGIS files
+
+
+ No legend entries selected
+
+
+ Select the layers and groups you want to remove in the legend.
+
+
+ Remove layers and groups
+
+
+ Remove %n legend entries?
+ number of legend items to remove
+
+
+ %n legend entries removed.
+ number of removed legend entries
+
+
+ %1 (%2 type unsupported)
+
+
+ http://qgis.org/en/site/forusers/commercial_support.html
+
+
+ Do you want to save the current project? %1
+
+
+ Invalid Layer
+ Буруу Давхарга
+
+
+ SpatiaLite
+
+
+ Cannot get SpatiaLite select dialog from provider.
+
+
+ Delimited Text
+
+
+ Cannot get Delimited Text select dialog from provider.
+
+
+ MSSQL
+
+
+ Cannot get MSSQL select dialog from provider.
+
+
+ Oracle
+
+
+ Cannot get Oracle select dialog from provider.
+
+
+ WMS
+ WMS
+
+
+ Cannot get WMS select dialog from provider.
+
+
+ WCS
+
+
+ Cannot get WCS select dialog from provider.
+
+
+ WFS
+
+
+ Cannot get WFS select dialog from provider.
+
+
+ Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
+
+
+ Auto-open Project
+
+
+ Failed to open: %1
+
+
+ Not valid project file: %1
+
+
+ Project failed to open: %1
+
+
+ Default template has been reopened: %1
+
+
+ File not found: %1
+
+
+ Calculating...
+ Тооцоолж байна...
+
+
+ Abort...
+ Зогсоох...
+
+
+ Choose a QGIS project file to open
+ Нээх QGIS төслийн ажлыг сонгох
+
+
+ Loading project: %1
+
+
+ Unable to open project
+ Төсөл нээгдэх боломжгүй
+
+
+ Security warning
+
+
+ project macros have been disabled.
+
+
+ Enable macros
+
+
+ Project loaded
+
+
+ Choose a QGIS project file
+ QGIS төслийн ажил сонгох
+
+
+ Saved project to: %1
+
+
+ Unable to save project %1
+
+
+ Choose a file name to save the QGIS project file as
+
+
+ Unable to load %1
+
+
+ Choose a file name to save the map image as
+
+
+ Saved map image to %1
+
+
+ Default system font substituted.
+
+
+ Labeling
+
+
+ Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
+
+
+ Open labeling dialog
+
+
+ CRS was undefined
+
+
+ defaulting to project CRS %1 - %2
+
+
+ defaulting to CRS %1 - %2
+
+
+ Classification
+
+
+ Range
+
+
+ Unique Values
+
+
+ File Name
+
+
+ Value Map
+
+
+ Enumeration
+
+
+ Hidden
+
+
+ Check Box
+
+
+ Text Edit
+
+
+ Value Relation
+
+
+ Uuid Generator
+
+
+ Photo
+
+
+ Web View
+
+
+ Color
+
+
+ Relation Reference
+
+
+ Date/Time
+
+
+ Compiled against GEOS
+
+
+ Running against GEOS
+
+
+ Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
+
+
+ Insufficient permissions
+
+
+ The project file is not writable.
+
+
+ DXF export completed
+
+
+ DXF export failed
+
+
+ Commit errors
+
+
+ Could not commit changes to layer %1
+
+
+ Errors: %1
+
+
+
+ Show more
+
+
+ Labeling Options
+
+
+ Please select a vector layer first
+
+
+ Layer labeling settings
+
+
+ Reading raster
+
+
+ Cannot write raster error code: %1
+
+
+ Saving done
+ Хадгаллаа
+
+
+ Export to vector file has been completed
+
+
+ Save error
+ Алдааг хадгалах
+
+
+ Export to vector file failed.
+Error: %1
+
+
+ No Layer Selected
+ Сонгогдсон давхарга байхгүй байна
+
+
+ To delete features, you must select a vector layer in the legend
+ Объектийг устгахын тулд вектор давхарга сонгох хэрэгтэй
+
+
+ No Vector Layer Selected
+ Вектор Давхарга Сонгоогүй байна
+
+
+ Deleting features only works on vector layers
+ Вектор давхарга дээр л объект устгаж болно
+
+
+ Provider does not support deletion
+
+
+ Data provider does not support deleting features
+
+
+ Layer not editable
+ Давхарга засварлагдах боломжгүй
+
+
+ The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
+
+
+ No Features Selected
+
+
+ The current layer has not selected features
+
+
+ Delete features
+
+
+ Delete %n feature(s)?
+ number of features to delete
+
+
+ Features deleted
+
+
+ Problem deleting features
+ Объект устгахад асуудалтай
+
+
+ A problem occured during deletion of features
+ Объектийг устгах явцад асуудал үүслээ
+
+
+ %n feature(s) deleted.
+ number of features deleted
+
+
+ Merging features...
+
+
+ Abort
+ Зогсоох
+
+
+ Create unique print composer title
+
+
+ (title generated if left empty)
+
+
+ Composer title
+
+
+ Title can not be empty!
+
+
+ Title already exists!
+
+
+ Composer %1
+
+
+ copy
+
+
+ No active layer
+ Идэвхтэй давхарга алга
+
+
+ No active layer found. Please select a layer in the layer list
+ Идэвхтэй давхарга олдсонгүй. Давхаргын жагсаалтаас давхарга сонгоно уу
+
+
+ Active layer is not vector
+ Идэвхтэй давхарга вектор биш байна
+
+
+ The merge features tool only works on vector layers. Please select a vector layer from the layer list
+
+
+ Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
+
+
+ Not enough features selected
+ Хангалттай обьект сонгогдоогүй байна
+
+
+ The merge tool requires at least two selected features
+
+
+ Merged feature attributes
+
+
+ Merge failed
+
+
+ An error occured during the merge operation
+
+
+ Union operation canceled
+
+
+ The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
+
+
+ Merged features
+
+
+ No active vector layer
+
+
+ To select features, choose a vector layer in the legend
+
+
+ Features cut
+
+
+ Features pasted
+
+
+ Paste features
+
+
+ no features could be successfully pasted.
+
+
+ %1 features were successfully pasted.
+
+
+ %1 of %2 features could be successfully pasted.
+
+
+ Pasted
+
+
+ New memory layer name
+
+
+ Layer name
+
+
+ No features in clipboard.
+
+
+ No features with geometry found, point type layer will be created.
+
+
+ Multiple geometry types found, features with geometry different from %1 will be created without geometry.
+
+
+ Cannot create new layer
+
+
+ Cannot create field %1 (%2,%3)
+
+
+ Cannot copy style: %1
+
+
+ Cannot parse style: %1:%2:%3
+
+
+ Cannot read style: %1
+
+
+ Start editing failed
+ Засварын горим эхэлсэнгүй
+
+
+ Provider cannot be opened for editing
+
+
+ Stop editing
+
+
+ Do you want to save the changes to layer %1?
+
+
+ Problems during roll back
+
+
+ Could not %1 changes to layer %2
+
+Errors: %3
+
+
+
+ rollback
+
+
+ cancel
+
+
+ Save
+
+
+ all
+
+
+ Rollback
+
+
+ Cancel
+
+
+ Current edits
+
+
+ %1 current changes for %2 layer(s)?
+
+
+ copy
+
+
+ Plugin layer
+
+
+ Memory layer
+
+
+ Duplicate layer:
+
+
+ %1 (duplication resulted in invalid layer)
+
+
+ Set scale visibility for selected layers
+
+
+ Couldn't load Python support library: %1
+
+
+ Couldn't resolve python support library's instance() symbol.
+
+
+ Python support ENABLED :-)
+
+
+ There is a new version of QGIS available
+ QGIS-ийн шинэ хувилбар гарлаа
+
+
+ You are running a development version of QGIS
+ QGIS-ийн хөгжүүлэх хувилбарыг ажиллуулж байна
+
+
+ You are running the current version of QGIS
+ QGIS-ийн одоохи хувилбарыг ажиллуулж байна
+
+
+ Would you like more information?
+ Та илүү мэдээлэл авмаар байна уу?
+
+
+ QGIS Version Information
+ QGIS Хувилбарын Мэдээлэл
+
+
+ QGIS - Changes since last release
+
+
+ Unable to get current version information from server
+ Серверээс хувилбарын мэдээлэл авч болохгүй нь
+
+
+ Connection refused - server may be down
+ Холболт цуцлагдлаа - сервер унтарсан байх
+
+
+ QGIS server was not found
+ QGIS сервер олдсонгүй
+
+
+ Unknown network socket error: %1
+
+
+ Unable to communicate with QGIS Version server
+%1
+
+
+ To perform a full histogram stretch, you need to have a raster layer selected.
+
+
+ To change brightness or contrast, you need to have a raster layer selected.
+
+
+ en
+ documentation language
+
+
+ Layer is not valid
+ Давхарга хтодорхой бус
+
+
+ The layer %1 is not a valid layer and can not be added to the map
+
+
+ The layer is not a valid layer and can not be added to the map
+ Давхарга тодорхойгүй тул зурагт нэмж болохгүй
+
+
+ Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
+
+
+ Save?
+ Хадгалах уу?
+
+
+ Current CRS: %1 (OTFR enabled)
-
- Current CRS: %1 (OTFR disabled)
-
- Map coordinates for the current view extents
+
+
+ Map coordinates at mouse cursor position
+
+
+ Extents:
+
+
+ Maptips require an active layer
+
+
+ %n feature(s) selected on layer %1.
+ number of selected features
+
+
+ Open a GDAL Supported Raster Data Source
+ GDAL ДэмждэгРастер Өгөгдлийг Нээх
+
+
+ Error adding valid layer to map canvas
+
+
+ Raster layer
+
+
+ %1 is not a supported raster data source
+
+
+ Unsupported Data Source
+
+
+ Exit QGIS
+
+
+ Do you really want to quit QGIS?
+
+
+ This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
+
+
+ <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
+
+
+ <tt>Settings:Options:General</tt>
+ Menu path to setting options
+
+
+ Warn me when opening a project file saved with an older version of QGIS
+
+
+ Project file is older
+
+
+ This project file was saved by an older version of QGIS
+
+
+ Please check the <a href="#messageLog">message log</a> for further info.
+
+
+ A network request timed out, any data received is likely incomplete.
+
+
+ Warning
+ Анхааруулга
+
+
+ This layer doesn't have a properties dialog.
+
+
+ Authentication required
+
+
+ Proxy authentication required
+
+
+ SSL errors occured accessing URL %1:
+
+
+
Always ignore these errors?
@@ -13441,1150 +13135,10 @@ Always ignore these errors?
Эдгээр алдааг үргэлж үл ойшоох уу?
- %n SSL errors occured
number of errors
-
- %n SSL алдаа гарлаа
- %n SSL алдаа гарлаа
-
-
-
- %1 doesn't have any layers
- %1 ямарч давхарга бахйгүй байна
-
-
- Select raster layers to add...
- Нэмэх растер давхаргыг сонгоно уу...
-
-
- Raster
- Растер
-
-
- What's new in Version 1.7.0 'Wrocław'?
- Хувилбар 1.7.2 'Worclaw'-д юу шинээр нэмэгдэв?
-
-
- New Tools
- Шинэ хэрэгсэл
-
-
- Added voronoi polygon tool to Vector menu.
- Вектор цэсэнд вороной полигон хэрэгсэл нэмэгдсэн.
-
-
- Rasters
- Растер
-
-
- QGIS Mapserver
- QGIS Вебсервер
-
-
- Printing
- Хэвлэж байна
-
-
- Select vector layers to add...
- Нэмэх вектор давхаргыг сонгоно уу...
-
-
- PostgreSQL
- PostgreSQL
-
-
- Cannot get PostgreSQL select dialog from provider.
-
-
- %1 is an invalid layer - not loaded
-
-
- SpatiaLite
-
-
- Cannot get SpatiaLite select dialog from provider.
-
-
- MSSQL
-
-
- Oracle
-
-
- Cannot get Oracle select dialog from provider.
-
-
- WMS
- WMS
-
-
- Cannot get WMS select dialog from provider.
-
-
- WCS
-
-
- Cannot get WCS select dialog from provider.
-
-
- WFS
-
-
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
-
- Open Template Project
-
-
- Auto-open Project
-
-
- Failed to open: %1
-
-
- Not valid project file: %1
-
-
- Project failed to open: %1
-
-
- Default template has been reopened: %1
-
-
- File not found: %1
-
-
- Loading project: %1
-
-
- Security warning
-
-
- project macros have been disabled.
-
-
- Enable macros
-
-
- Project loaded
-
-
- Choose a file name to save the QGIS project file as
-
-
- Unable to load %1
-
-
- Choose a file name to save the map image as
-
-
- Default system font substituted.
-
-
- Labeling
-
-
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
-
- Open labeling dialog
-
-
- CRS was undefined
-
-
- defaulting to project CRS %1 - %2
-
-
- defaulting to CRS %1 - %2
-
-
- Classification
- Ангилал
-
-
- Range
-
-
- Unique Values
-
-
- File Name
- Файлын нэр
-
-
- Value Map
-
-
- Enumeration
-
-
- Hidden
- Далд
-
-
- Check Box
-
-
- Text Edit
-
-
- Value Relation
-
-
- Uuid Generator
-
-
- Photo
-
-
- Web View
-
-
- Color
- Өнгө
-
-
- Relation Reference
-
-
- Date/Time
-
-
- Compiled against GEOS
-
-
- Running against GEOS
-
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
-
- Insufficient permissions
-
-
- The project file is not writable.
-
-
- DXF export completed
-
-
- DXF export failed
-
-
- Commit errors
-
-
- Could not commit changes to layer %1
-
-
- Errors: %1
-
-
-
- Show more
-
-
- Labeling Options
-
-
- Please select a vector layer first
-
-
- Layer labeling settings
-
-
- Reading raster
-
-
- Cannot write raster error code: %1
-
-
- Saving done
- Хадгаллаа
-
-
- Export to vector file has been completed
-
-
- Save error
- Алдааг хадгалах
-
-
- Export to vector file failed.
-Error: %1
-
-
- No Features Selected
-
-
- The current layer has not selected features
-
-
- Features deleted
-
-
- %n feature(s) deleted.
- number of features deleted
-
-
-
-
- Merging features...
-
-
- Abort
- Зогсоох
-
-
- Create unique print composer title
-
-
- (title generated if left empty)
-
-
- Composer title
-
-
- Title can not be empty!
-
-
- Title already exists!
-
-
- Composer %1
-
-
- copy
-
-
- No active layer
- Идэвхтэй давхарга алга
-
-
- No active layer found. Please select a layer in the layer list
- Идэвхтэй давхарга олдсонгүй. Давхаргын жагсаалтаас давхарга сонгоно уу
-
-
- Active layer is not vector
- Идэвхтэй давхарга вектор биш байна
-
-
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
-
-
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
-
-
- The merge tool requires at least two selected features
-
-
- Merged feature attributes
-
-
- Merge failed
-
-
- An error occured during the merge operation
-
-
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
-
-
- Merged features
-
-
- No active vector layer
-
-
- To select features, choose a vector layer in the legend
-
-
- Features cut
-
-
- Features pasted
-
-
- Paste features
-
-
- no features could be successfully pasted.
-
-
- %1 features were successfully pasted.
-
-
- %1 of %2 features could be successfully pasted.
-
-
- Pasted
-
-
- New memory layer name
-
-
- Layer name
- Давхаргын нэр
-
-
- No features in clipboard.
-
-
- No features with geometry found, point type layer will be created.
-
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
-
- Cannot create new layer
-
-
- Cannot create field %1 (%2,%3)
-
-
- Cannot copy style: %1
-
-
- Cannot parse style: %1:%2:%3
-
-
- Cannot read style: %1
-
-
- Start editing failed
- Засварын горим эхэлсэнгүй
-
-
- Provider cannot be opened for editing
- Нийлүүлэгч засвар хийхээр нээгдэхгүй
-
-
- Stop editing
-
-
- Do you want to save the changes to layer %1?
-
-
- Problems during roll back
- roll back-ийн явцад асуудал гарав
-
-
- Set scale visibility for selected layers
-
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
-
- A network request timed out, any data received is likely incomplete.
-
-
- GPS Information
- GPS Мэдээлэл
-
-
- Log Messages
-
-
- QGIS starting...
-
-
- Window
-
-
- Vect&or
- Вект&oр
-
-
- &Web
-
-
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
-
-
- Current map coordinate (lat,lon or east,north)
-
-
- Map layer list that displays all layers in drawing order.
-
-
- Layer order
-
-
- < Blank >
-
-
- QGIS version
- GWT Хувилбар
-
-
- QGIS code revision
-
-
- Compiled against Qt
-
-
- Running against Qt
-
-
- GDAL/OGR Version
- GDAL/OGR Хувилбар
-
-
- GEOS Version
- GEOS Хувилбар
-
-
- PostgreSQL Client Version
-
-
- No support.
-
-
- SpatiaLite Version
- SpatiaLite Хувилбар
-
-
- QWT Version
- GWT Хувилбар
-
-
- QScintilla2 Version
-
-
- This copy of QGIS writes debugging output.
-
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
-
- Delimited Text
-
-
- Cannot get Delimited Text select dialog from provider.
-
-
- Cannot get MSSQL select dialog from provider.
-
-
- QGIS files
-
-
- Could not %1 changes to layer %2
-
-Errors: %3
-
-
-
- rollback
-
-
- cancel
-
-
- Save
- Хадгалах
-
-
- all
-
-
- Rollback
-
-
- Cancel
-
-
- Current edits
-
-
- %1 current changes for %2 layer(s)?
-
-
- copy
-
-
- Plugin layer
-
-
- Memory layer
-
-
- Duplicate layer:
-
-
- %1 (duplication resulted in invalid layer)
-
-
- QGIS - Changes since last release
-
-
- Unknown network socket error: %1
-
-
- To change brightness or contrast, you need to have a raster layer selected.
-
-
- en
- documentation language
-
-
- The layer %1 is not a valid layer and can not be added to the map
-
-
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
-
- Map coordinates for the current view extents
-
-
- Extents:
-
-
- Maptips require an active layer
-
-
- %n feature(s) selected on layer %1.
- number of selected features
-
-
-
-
- Error adding valid layer to map canvas
-
-
- Raster layer
-
-
- Do you really want to quit QGIS?
-
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
-
- This project file was saved by an older version of QGIS
-
-
- Warning
- Анхааруулга
-
-
- This layer doesn't have a properties dialog.
-
-
- Authentication required
-
-
- Proxy authentication required
-
-
- SSL errors occured accessing URL %1:
-
-
- Quantum GIS - %1 ('%2')
- Quantum GIS - %1 ('%2')
-
-
- Ctrl+P
- New Print Composer
- Ctrl+P
-
-
- Ctrl+/
- Capture Lines
- Ctrl+/
-
-
- Private qgis.db
-
-
- %1 is not a valid or recognized data source
-
-
- Calculating...
- Тооцоолж байна...
-
-
- Abort...
- Зогсоох...
-
-
- QGis files (*.qgs)
- QGIS ажлууд (*.qgs)
-
-
- Saved project to: %1
-
-
- Unable to save project %1
-
-
- Saved map image to %1
-
-
- Couldn't load Python support library: %1
-
-
- Couldn't resolve python support library's instance() symbol.
-
-
- Python support ENABLED :-)
-
-
- Unable to communicate with QGIS Version server
-%1
-
-
- To perform a full histogram stretch, you need to have a raster layer selected.
-
-
- %1 is not a supported raster data source
- %1 нь танигдахгүй растер өгөгдөл байна
-
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
-
-
- Layers
- Давхаргууд
-
-
- Delete features
-
-
- Delete %n feature(s)?
- number of features to delete
-
-
-
-
- &Raster
- &Растер
+ %n SSL алдаа гарлаа %n SSL алдаа гарлаа
@@ -14597,44 +13151,38 @@ Errors: %3
QgsAbout
-
- About Quantum GIS
- QGIS-н тухай
-
-
- Essen (Germany), Developer meeting 2012
-
-
- Contributors
- Оролцогчид
-
-
- about:blank
- тухай:хоосон
-
-
- Donors
- Хандивлагчид
-
About
Тухай
- Version
- Хувилбар
+ About QGIS
+
- What's New
- Шинэ мэдээ
+ License
+
+
+ <html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
+
+
+ QGIS is licensed under the GNU General Public License
+
+
+ http://www.gnu.org/licenses
+ http://www.gnu.org/licenses
QGIS Нүүр Хуудас
- About QGIS
- QGIS-ийн тухай
+ Join our user mailing list
+
- License
- about:blank
+
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
-
-
- QGIS is licensed under the GNU General Public License
- What's New
+ Шинэ мэдээ
Хөгжүүлэгч
- Name
- Нэр
+ Essen (Germany), Developer meeting 2012
+
- Quantum GIS is licensed under the GNU General Public License
- QGIS хамтлаг
-
-
- http://www.gnu.org/licenses
- http://www.gnu.org/licenses
-
-
- Join our user mailing list
-
-
- <p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
-
-
- Language
- Хэл
-
-
- Names
- Нэрс
-
-
- Available QGIS Data Provider Plugins
-
-
- Available Qt Database Plugins
-
-
- Available Qt Image Plugins
-
-
- Qt Image Plugin Search Paths <br>
- Contributors
+ Оролцогчид
Translators
Орчуулагчид
+
+ Donors
+ Хандивлагчид
+
+
+ <p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
+
+
+ Available QGIS Data Provider Plugins
+
+
+ Available Qt Database Plugins
+
+
+ Available Qt Image Plugins
+
+
+ Qt Image Plugin Search Paths <br>
+
QgsAddAttrDialog
Warning
- Анхааруулга
+
Invalid field name. This field name is reserved and cannot be used.
-
QgsAddAttrDialogBase
-
- Add Attribute
- Чанарын үзүүлэлт нэмэх
-
Add column
@@ -14787,7 +13313,7 @@ p, li { white-space: pre-wrap; }
Add vector join
-
Target field
-
Cache join layer in virtual memory
-
@@ -14820,7 +13346,7 @@ p, li { white-space: pre-wrap; }
Add tab or group for %1
-
@@ -14828,27 +13354,27 @@ p, li { white-space: pre-wrap; }
Dialog
- Харилцах цонх
+
Create category
-
as
-
a tab
-
a group in container
-
@@ -14861,7 +13387,7 @@ p, li { white-space: pre-wrap; }
Select background color
- Дэвсгэр өнгө сонгох
+
@@ -14876,21 +13402,21 @@ p, li { white-space: pre-wrap; }
Fixed map position
Тогтсон зургийн байрлал
-
- Background color
- Дэвсгэр өнгө
-
Map marker
-
Frame width
Хүрээний өргөн
+
+ Background color
+
Frame color
@@ -14902,108 +13428,108 @@ p, li { white-space: pre-wrap; }
&Expand All
-
&Collapse All
-
&Remove
- &Хасах
+
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Duplicate
-
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As...
-
Save As Layer Definition File...
-
&Filter...
-
&Properties
- &Мөнчанар
+
Copy Style
-
Paste Style
-
QgsApplication
- Exception
Хасалт
- unknown exception
тодорхойгүй хасалт
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -15015,106 +13541,102 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
-
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
-
- Migration of private qgis.db failed.
%1
-
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
-
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
QgsAtlasCompositionWidget
-
- Map %1
- Зураг %1
-
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Expression based filename
-
Atlas preview
-
No matching atlas features found!
-
Expression based filter
-
@@ -15122,72 +13644,64 @@ Parser error:
Atlas Generation
-
Generate an atlas
-
Configuration
-
Coverage layer
-
-
- Visibility
- Үзэгдэх
+
Hidden coverage layer
-
Sort by
-
Sort direction
-
...
- ...
+
Filter with
-
-
- %
- %
+
Output
- Гаралт
+
Single file export when possible
-
Output filename expression
-
@@ -15201,7 +13715,7 @@ Parser error:
Insert expression
-
Echo attribute's value
-
Run an application
-
Get feature id
-
Selected field's value (Identify features tool)
-
Clicked coordinates (Run feature actions tool)
-
Open file
- Ажил нээх
+
Search on web based on attribute's value
-
QgsAttributeActionDialogBase
- This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Insert action button. Actions can be edited here by double clicking on the item.
- Энэ давхаргад тодорхойлогдсон үйлдлийн жагсаалт.Дараахи нүдэнд задаргааг нь оруулж Insert товчлуурдаран үйлдэл нэмж болно. Холбогдох хэсэгт угсраа товшилт хийн үйлдлийг засажөөрчилж болно.
+ Attribute Actions
+
- Move up
- Дээш шилжүүлэх
+ Action list
+
+
+ This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
+
+
+ Type
+ Төрөл
+
+
+ Name
+ Нэр
+
+
+ Action
+
+
+ Capture
+
+
+ Remove the selected action
+ Сонгосон үйлдлийг хасах
Move the selected action up
Сонгосон үйлдлийг дээш шилжүүлэх
-
- Move down
- Доош шилжүүлэх
-
Move the selected action down
Сонгосон үйлдлийг доош шилжүүлэх
- Remove
- Хасах
+ Add default actions
+
- Remove the selected action
- Сонгосон үйлдлийг хасах
+ Action properties
+
+
+ Generic
+
+
+ Python
+ Python
+
+
+ Mac
+ Mac
+
+
+ Windows
+ Windows
+
+
+ Unix
+ Unix
+
+
+ Open
+
+
+ Captures any output from the action
+ Үйлдлийн аливаа үр дүнг авах
+
+
+ Captures the standard output or error generated by the action and displays it in a dialog box
+ Үйлдлийн стандарт үр дүн буюу алдааг аваад харилцах цонхонд үзүүлэх
+
+
+ Capture output
+ Үр дүнг авах
Enter the action name here
Үйлдлийн нэрийг энд оруулах
+
+ Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
+
Enter the action command here
Үйлдлийн командыг энд оруулах
-
- Insert action
- Үйлдэл оруулах
-
-
- Inserts the action into the list above
- Үйлдлийг дээрх жагсаалтанд оруулна
-
-
- Update action
- Үйлдлийг шинэчлэх
-
-
- Update the selected action
- Сонгосон үйлдлийг шинэчлэх
-
-
- Insert field
- Оруулалт бүтэлгүйтэв
-
-
- Inserts the selected field into the action, prepended with a %
- Сонгосон, % тэмдгээр эхэлсэн талбарыг үйлдэлд оруулна
-
-
- The valid attribute names for this layer
- Энэ давхаргын үзүүлэлтийн нэр нь буруу
-
-
- Capture output
- Үр дүнг авах
-
-
- Captures any output from the action
- Үйлдлийн аливаа үр дүнг авах
-
-
- Captures the standard output or error generated by the action and displays it in a dialog box
- Үйлдлийн стандарт үр дүн буюу алдааг аваад харилцах цонхонд үзүүлэх
-
-
- Attribute Actions
-
-
- Action properties
-
-
- Name
- Нэр
-
-
- Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
-
- Action
-
-
- Action list
-
-
- This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
-
-
- Type
- Төрөл
-
-
- Add default actions
-
-
- Open
- Нээх
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Browse for action
-
Click to browse for an action
-
+
+ Clicking the button will let you select an application to use as the action
+
Inserts an expression into the action
-
Insert expression...
-
+
+ The valid attribute names for this layer
+ Энэ давхаргын үзүүлэлтийн нэр нь буруу
Inserts the selected field into the action
-
+
+ Insert field
+ Оруулалт бүтэлгүйтэв
+
+
+ Inserts the action into the list above
+ Үйлдлийг дээрх жагсаалтанд оруулна
Add to action list
-
+
+ Update the selected action
+ Сонгосон үйлдлийг шинэчлэх
Update selected action
-
-
- Generic
-
-
- Python
- Python
-
-
- Windows
- Windows
-
-
- Mac
- Mac
-
-
- Unix
- Unix
-
-
- Capture
-
-
- Clicking the button will let you select an application to use as the action
-
QgsAttributeDialog
-
- Error
- Алдаа
-
-
- Error: %1
- Алдаа: %1
-
-
- Attributes - %1
- Үзүүлэлтүүд - %1
-
Feature Attributes
-
-
-
- QgsAttributeEditor
-
- Select a file
- Файлыг сонго
-
-
- Select a date
- Огноог сонго
-
-
- (no selection)
- (Сонголт байхгүй)
-
-
- ...
- ...
-
-
- <
- <
+
@@ -15527,7 +13978,7 @@ Parser error:
Attributes changed
- Атрибут өөрчлөгдсөн
+
@@ -15567,19 +14018,11 @@ Parser error:
Insert NULL value on top
-
QgsAttributeSelectionDialog
-
- Attribute
- Үзүүлэлт
-
-
- Clear
- Цэвэрлэх
-
Ascending
@@ -15601,36 +14044,17 @@ Parser error:
Columns
- Багана
+
Reset
-
-
- <b>Attribute</b>
- <b>Үзүүлэлт</b>
-
-
- Clear
- Цэвэрлэх
+
Sorting
-
-
- Ascending
- Өсөх эрэмбээр
-
-
-
- QgsAttributeTableAction
-
- Attributes changed
- Атрибут өөрчлөгдсөн
+
@@ -15643,132 +14067,15 @@ Parser error:
QgsAttributeTableDialog
-
- Search string parsing error
- Мөр танилтын алдааг хайх
-
-
- Search results
- Хайлтын дүн
-
-
- You've supplied an empty search string.
- Та хайлтын хоосон мөр өгсөн байна.
-
-
- Error during search
- Хайлтын үед алдаа
-
-
- Attribute table - %1 (%n Feature(s))
- feature count
-
-
-
-
- Parsing error
-
-
- Evaluation error
-
-
- Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
-
-
- Update Filtered
-
-
- Error
- Алдаа
-
-
- An error occured while evaluating the calculation string:
-%1
-
-
- Expression based filter
-
-
- Attribute added
-
-
- Attribute Error
-
-
- The attribute could not be added to the layer
-
-
- Deleted attribute
-
-
- The attribute(s) could not be deleted
-
-
- Attribute error
-
-
- Error filtering
-
-
- Geometryless feature added
-
-
- Run action
- Үйлдлийг гүйцэтгэх
-
-
- Open form
- Форм нээх
-
Attribute Table
Атирбут Хүснэгт
-
- Show selected only
- Зөвхөн сонгосныг харуул
-
-
- Search selected only
- Зөвхөн сонгосныг хай
-
Case sensitive
-
?
- Close
- Хаах
+ Delete selected features (DEL)
+
Unselect all (Ctrl+U)
-
Move selection to top (Ctrl+T)
Сонголтыг хамгийн дээр авчир (Ctrl+T)
-
- Invert selection (Ctrl+R)
-
-
- Zoom map to the selected rows (Ctrl+J)
-
-
- Pan map to the selected rows (Ctrl+P)
-
-
- Ctrl+P
- Ctrl+P
-
-
- Toggle editing mode (Ctrl+E)
-
-
- Ctrl+E
- Ctrl+E
-
-
- Save Edits (Ctrl+S)
-
-
- Delete selected features (Ctrl+D)
- Сонгосныг устгах (Ctrl+D)
-
-
- Ctrl+D
- Ctrl+D
-
-
- Select features using an expression
-
-
- New column (Ctrl+W)
- Шинэ багана (Ctrl+W)
-
-
- Ctrl+W
- Ctrl+W
-
-
- Filter
- Шүүлтүүр
-
-
- Filters the visible features according to the current filter selection and filter string.
-
-
- Apply
-
-
- mMainViewButtonGroup
-
-
- Table View
-
-
- =
- =
-
-
- Update All
-
-
- Advanced Filter (Expression)
-
-
- Use the Expression Builder to define the filter
-
-
- Ctrl+F
- Ctrl+F
-
-
- Show All Features
-
-
- Show Selected Features
-
-
- Show Edited and New Features
-
-
- Show Features Visible On Map
-
-
- Delete selected features (DEL)
-
-
- The filter defines which features are currently shown in the list or on the table
-
-
- Form View
-
-
- Column Filter
-
-
- Filter all the features which have been edited but not yet saved
-
-
- Delete column (Ctrl+L)
- Багана усгах (Ctrl+L)
-
-
- Ctrl+L
- Ctrl+L
-
-
- Add feature
- Обьект нэмэх
-
-
- +
- +
-
-
- Open field calculator (Ctrl+I)
-
-
- Ctrl+I
- Ctrl+I
-
Ctrl+T
Ctrl+T
- Invert selection
- Урвуу сонголт
+ Invert selection (Ctrl+R)
+
Ctrl+C
Ctrl+C
+
+ Zoom map to the selected rows (Ctrl+J)
+
Ctrl+J
Ctrl+J
- in
- дотор
+ Pan map to the selected rows (Ctrl+P)
+
- &Search
- &Хайх
+ Ctrl+P
+
- Help
- Туслах
+ Toggle editing mode (Ctrl+E)
+
+
+ Ctrl+E
+ Ctrl+E
+
+
+ Save Edits (Ctrl+S)
+
...
...
+
+ Select features using an expression
+
+
+ New column (Ctrl+W)
+ Шинэ багана (Ctrl+W)
+
+
+ Ctrl+W
+ Ctrl+W
+
+
+ Filter
+
+
+ Filters the visible features according to the current filter selection and filter string.
+
+
+ Apply
+
+
+ mMainViewButtonGroup
+
+
+ Table View
+
+
+ =
+
+
+ Update All
+
+
+ Advanced Filter (Expression)
+
+
+ Use the Expression Builder to define the filter
+
+
+ Ctrl+F
+
+
+ Show All Features
+
+
+ Show Selected Features
+
+
+ Show Edited and New Features
+
+
+ Show Features Visible On Map
+
+
+ The filter defines which features are currently shown in the list or on the table
+
+
+ Form View
+
+
+ Column Filter
+
+
+ Filter all the features which have been edited but not yet saved
+
+
+ Delete column (Ctrl+L)
+ Багана усгах (Ctrl+L)
+
+
+ Ctrl+L
+ Ctrl+L
+
+
+ Add feature
+ Обьект нэмэх
+
+
+ Open field calculator (Ctrl+I)
+
+
+ Ctrl+I
+ Ctrl+I
+
+
+ Attribute table - %1 (%n Feature(s))
+ feature count
+
+
+ Parsing error
+
+
+ Evaluation error
+
+
+ Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
+
+
+ Update Filtered
+
+
+ Error
+
+
+ An error occured while evaluating the calculation string:
+%1
+
+
+ Expression based filter
+
+
+ Attribute added
+
+
+ Attribute Error
+
+
+ The attribute could not be added to the layer
+
+
+ Deleted attribute
+
+
+ The attribute(s) could not be deleted
+
+
+ Attribute error
+
+
+ Error filtering
+
+
+ Geometryless feature added
+
QgsAttributeTableModel
feature id
-
QgsAttributeTableView
-
- Run action
- Үйлдлийг гүйцэтгэх
-
-
- Open form
- Форм нээх
-
Select All
-
QgsAttributeTypeDialog
-
- Select a file
- Ажлыг сонгох
-
-
- Error
- Алдаа
-
-
- Could not open file %1
-Error was:%2
- %1 ажлыг нээх боломжгүй
-Алдаа нь:%2
-
-
- Classification
- Ангилал
-
-
- Range
- Хязгаар
-
-
- Unique values
- Үл давтагдах утгууд
-
-
- File name
- Ажлын нэр
-
-
- Hidden
- Далд
-
-
- Calendar
- Хуанли
-
-
- Color
- Өнгө
-
Edit Widget Properties
-
-
- Label on top
-
-
- Layer
- Давхарга
-
-
- Key column
- Гол багана
-
-
- ...
- ...
-
-
- Height
- Өндөр
-
-
- Width
- Өргөн
-
-
- Minimum
- Хамгийн бага
-
-
- Maximum
- Хамгийн их
-
-
- Step
- Алхам
-
-
- A calendar widget to enter a date.
- Огноо оруулах Хуанли Виджет.
+
Засварлах боломжтой
- Value
- Утга
-
-
- Description
- Тайлбар
-
-
- Remove Selected
- Сонгогдсоныг Хасах
-
-
- Load Data from CSV file
- CSV ажлаас өгөгдөл дуудах
+ Label on top
+
@@ -16169,67 +14424,67 @@ Error was:%2
Normal
-
Lighten
-
Screen
-
Dodge
-
Addition
- Нэмэх
+
Darken
-
Multiply
-
Burn
-
Overlay
-
Soft light
-
Hard light
-
Difference
- Зөрүү
+
Subtract
-
@@ -16237,13 +14492,23 @@ Error was:%2
&Add
- &Нэмэх
+
+
+ &Delete
+
+
+ &Zoom to
+
Error
- Алдаа
+
ID
- ID
+
Name
- Нэр
+
Project
- Төсөл
+
xMin
-
yMin
-
xMax
-
yMax
-
SRID
- SRID
+
New bookmark
-
Unable to create the bookmark.
Driver:%1
Database:%2
-
Are you sure you want to delete %n bookmark(s)?
number of rows
-
-
+
Empty extent
-
Reprojected extent is empty.
-
-
- &Delete
-
-
- &Zoom to
-
@@ -16347,22 +14599,6 @@ Database:%2
Geospatial Bookmarks
Оронзайн хавчуулга
-
- Name
- Нэр
-
-
- Project
- Төсөл
-
-
- Extent
- Өргөтгөл
-
-
- Id
- Id
-
QgsBrowser
@@ -16374,17 +14610,17 @@ Database:%2
Cannot get WMS select dialog from provider.
-
CRS
-
Cannot set layer CRS
-
@@ -16392,82 +14628,78 @@ Database:%2
QGIS Browser
-
Param
-
Metadata
-
Preview
- Тойм
+
Stop rendering
-
Attributes
-
toolBar
-
New Shapefile
-
Ctrl+Shift+N
- Ctrl+Shift+N
+
Refresh
-
F5
- F5
-
-
- Ctrl+R
- Ctrl+R
+
Set layer CRS
-
Manage WMS
-
Manage WMS Connections
-
Ctrl+Shift+W
- Ctrl+Shift+W
+
@@ -16475,100 +14707,96 @@ Database:%2
Dialog
- Харилцах цонх
+
Path
-
QgsBrowserDockWidget
- Browser
- Браузер
+ Case Sensitive
+
- Add Selected Layers
- Filter Pattern Syntax
+
+
+ Normal
+
+
+ Wildcard(s)
+
+
+ Regular Expression
+
Add as a favourite
-
Remove favourite
-
-
- Add Layer
-
Properties
-
-
- Case Sensitive
-
-
- Filter Pattern Syntax
-
-
- Normal
-
-
- Wildcard(s)
-
-
- Regular Expression
-
Fast scan this dir.
-
+
+ Add Layer
+
+
+ Add Selected Layers
+
Add a directory
-
Add directory to favourites
-
Error
- Алдаа
+
Layer Properties
- Давхаргын Мөнчанар
+
Directory Properties
-
@@ -16576,49 +14804,49 @@ Database:%2
Browser
- Браузер
+
Refresh
-
Add Selected Layers
-
Add
- Нэмэх
+
Filter Files
-
...
- ...
+
Collapse All
-
Options
-
Filter files
-
@@ -16626,27 +14854,27 @@ Database:%2
Dialog
- Харилцах цонх
+
Display Name
-
Layer Source
-
Provider
-
Metadata
-
@@ -16654,7 +14882,7 @@ Database:%2
Project home
-
Favourites
-
@@ -16672,77 +14900,77 @@ Database:%2
Solid
- Битүү
-
-
- Horizontal
- Хэвтээ
-
-
- Vertical
- Босоо
-
-
- Cross
-
-
- BDiagonal
-
-
- FDiagonal
-
-
- Diagonal X
-
-
- Dense 1
-
-
- Dense 2
-
-
- Dense 3
-
-
- Dense 4
-
-
- Dense 5
-
-
- Dense 6
-
-
- Dense 7
-
No Brush
-
+
+ Horizontal
+
+
+ Vertical
+
+
+ Cross
+
+
+ BDiagonal
+
+
+ FDiagonal
+
+
+ Diagonal X
+
+
+ Dense 1
+
+
+ Dense 2
+
+
+ Dense 3
+
+
+ Dense 4
+
+
+ Dense 5
+
+
+ Dense 6
+
+
+ Dense 7
+
@@ -16750,7 +14978,7 @@ Database:%2
QGIS
- QGIS
+
@@ -16758,134 +14986,78 @@ Database:%2
Form
-
A calendar widget to enter a date.
- Огноо оруулах Хуанли Виджет.
+
Date format
-
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
- Тэмдэг
+
- Value
- Утга
+
- Label
- Шошго
+
QgsCategorizedSymbolRendererV2Widget
-
- Value
- Утга
-
-
- Label
- Шошго
-
-
- Random colors
-
-
- Symbol levels...
-
-
- High number of classes!
-
-
- Classification would yield %1 entries which might not be expected. Continue?
-
-
- Error
- Алдаа
-
-
- There are no available color ramps. You can add them in Style Manager.
-
-
- The selected color ramp is not available.
-
-
- Confirm Delete
- Хасахаа Баталгаажуулах
-
-
- The classification field was changed from '%1' to '%2'.
-Should the existing classes be deleted before classification?
- Ангилал хийх талбар %1-ээс %2 болон өөрчлөгдлөө.
-Хуучин ангилалыг устгах уу?
-
Column
-
Symbol
- Тэмдэг
+
Change...
-
Color ramp
-
Invert
-
Classify
- Ангилах
+
Add
- Нэмэх
+
Delete all
-
Join
-
Advanced
- Нэмэлт
+
+
+ Random colors
+
+
+ Symbol levels...
+
+
+ High number of classes!
+
+
+ Classification would yield %1 entries which might not be expected. Continue?
+
+
+ Error
+
+
+ There are no available color ramps. You can add them in Style Manager.
+
+
+ The selected color ramp is not available.
+
+
+ Confirm Delete
+
+
+ The classification field was changed from '%1' to '%2'.
+Should the existing classes be deleted before classification?
+
@@ -16913,17 +15132,17 @@ Should the existing classes be deleted before classification?
Character Selector
-
Font:
-
Current font family and style
-
@@ -16931,17 +15150,17 @@ Should the existing classes be deleted before classification?
Form
-
Representation for checked state
-
Representation for unchecked state
-
@@ -16949,35 +15168,30 @@ Should the existing classes be deleted before classification?
Shift-click to expand, then collapse others
-
Ctrl (or Alt)-click to toggle all
-
QgsColorButton
- Select Color
-
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -16985,7 +15199,7 @@ Should the existing classes be deleted before classification?
Select Color
-
@@ -16994,7 +15208,7 @@ Should the existing classes be deleted before classification?
Random colors
-
Show compass
-
&About
- &Тухай
+
@@ -17020,7 +15234,7 @@ Should the existing classes be deleted before classification?
Pixmap not found
- Пиксзураг олдсонгүй
+
@@ -17028,346 +15242,266 @@ Should the existing classes be deleted before classification?
Internal Compass
-
Azimut
-
QgsComposer
- Big image
- Том дүрс
-
-
- Map 1
- Зураг 1
-
-
- SVG warning
-
-
- Don't show this message again
-
-
- SVG Format
- Close
+
QGIS
- QGIS
-
-
- File
- Ажил
-
-
- View
- Харагдалт
-
-
- Panels
- Самбар
-
-
- Toolbars
-
-
- Layout
-
-
- Composition
- Бүрдэл
-
-
- PDF Format
- PDF Төрөл
-
-
- The given output directory is not writable. Cancelling.
-
-
- To create image %1x%2 requires about %3 MB of memory. Proceed?
-
-
- Choose a file name to save the map image as
-
-
- Choose a file name to save the map as
-
-
- Save template
-
-
- Composer templates
-
Composer
-
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
-Please try a lower resolution or a smaller papersize
-
-
- Composer error
-
-
- Error, could not create new composer
-
-
- Loading template into composer...
-
-
- Project contains WMS layers
-
-
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
-
-
- Command history
-
-
- Close
- Хаах
+
Print Composers
- Хэвлэх үзэмж
+
Cu&t
-
Cut
-
&Copy
-
Copy
- Хуулах
+
&Paste
-
Paste
-
Edit
-
Normal
-
Simulate Photocopy (Grayscale)
-
Simulate photocopy (grayscale)
-
Simulate Fax (Mono)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
+
+ View
+
+
+ Panels
+
+
+ Toolbars
+
+
+ Layout
+
Atlas
-
Settings
-
Window
-
Help
-
%1%
- %1%
+
+
+ Composition
+
Item properties
-
+
+ Command history
+
Atlas generation
-
Set as atlas feature for %1
-
x: %1 mm
-
y: %1 mm
-
page: %3
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
+
+ Choose a file name to save the map as
+
+
+ PDF Format
+
Empty filename pattern
-
The filename pattern is empty. A default one will be used.
-
Directory where to save PDF files
-
Unable to write into the directory
-
+
+ The given output directory is not writable. Cancelling.
+
Atlas processing error
-
Feature filter parser error: %1
-
Error creating %1.
-
Rendering maps...
-
Abort
-
- Big image
+ Том дүрс
+
+
+ To create image %1x%2 requires about %3 MB of memory. Proceed?
+
+
+ Choose a file name to save the map image as
+
+
+ Memory Allocation Error
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
+Please try a lower resolution or a smaller papersize
+
+
+ Image export error
-
- Directory where to save image files
-
- Image format:
-
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
- SVG warning
+
Don't show this message again
+
+
+ <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
+
+
+ Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
-
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
-
- SVG Format
+
+
+ Directory where to save SVG files
-
- SVG export error
-
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
-
- Duplicating composer...
-
- Duplicate Composer
-
- Composer duplication failed.
-
- Save template
+
+
+ Composer templates
+
+
+ Save error
Алдааг хадгалах
- Error, could not save file
Алдаа, ажлыг хадгалсангүй
- Load template
Загвар дуудах
- Read error
Алдаа
- Error, could not read file
Алдаа, ажлыг уншихад
- Project contains composition effects
- Composer error
+
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
- Error, could not create new composer
+
+
+ Loading template into composer...
+
+
+ Project contains WMS layers
+
+
+ Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
+
Print as raster
- Project contains composition effects
+
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
+
+
+ Print as raster
+
+
+ Landscape
- Хэвтээ
+
QgsComposerArrowWidget
-
- General options
- Ерөнхий тохиргоо
-
Arrow outline width
@@ -17567,10 +15769,6 @@ Please try a lower resolution or a smaller papersize
Arrowhead width
Толгойн өргөн
-
- Arrow color
- Сумны өнгө
-
Arrow color changed
@@ -17579,36 +15777,36 @@ Please try a lower resolution or a smaller papersize
Select arrow color
-
Arrow marker changed
-
Arrow start marker
-
-
- Start marker svg file
-
-
- End marker svg file
-
Arrow end marker
-
+
+ Start marker svg file
+
+
+ End marker svg file
+
@@ -17623,68 +15821,56 @@ Please try a lower resolution or a smaller papersize
Arrow
Сум
-
- Arrow color...
- Сумны өнгө...
-
-
- Line width
- Шулууны өргөн
-
-
- Arrow head width
- Сумны толгойн өргөн
-
-
- Arrow markers
-
Main properties
-
Line width
- Шугамын өргөн
+
mm
- мм
+
Arrow head width
-
Color...
-
+
+ Arrow markers
+
Default
- Өгөгдмөл
+
None
-
SVG
-
Start marker
-
End marker
-
@@ -17703,47 +15889,65 @@ Please try a lower resolution or a smaller papersize
Center
-
Right
- Баруун
+
Left
- Зүүн
+
Attribute
-
Heading
-
Alignment
-
QgsComposerBase
- General
- Ерөнхий
+ MainWindow
+ ГолЦонх
- Composition
- Бүрдэл
+ Composer
+
- Item
- Зүйл
+ Paper Navigation
+
+
+ Composer Item Actions
+
+
+ Composer Items
+
+
+ Atlas
+
&Хэвлэх...
- Add new map
- Шинэ зураг нэмэх
+ Ctrl+P
+
- Add new label
- Шинэ шошго нэмэх
+ Zoom Full
+
- Add new vect legend
- Шинэ вект тайлбар нэмэх
+ Zoom full
+
- Select/Move item
- Сонгох/Шилжүүлэх
-
-
- Add new scalebar
- Хэмжээсийн багана шинээр нэмэх
-
-
- Refresh view
- Үзүүлбэрийг сэргээх
-
-
- MainWindow
- ГолЦонх
+ Ctrl+0
+
Zoom In
Томсгох
+
+ Zoom in
+
+
+ Ctrl++
+
Zoom Out
Багасгах
+
+ Zoom out
+
+
+ Ctrl+-
+
+
+ Zoom to 100%
+
+
+ Ctrl+1
+
+
+ Zoom
+
+
+ Add Map
+
+
+ Add new map
+ Шинэ зураг нэмэх
+
+
+ Add Label
+
+
+ Add new label
+ Шинэ шошго нэмэх
+
Add Legend
-
Add new legend
-
+
+ Move Item
+
+
+ Select/Move item
+ Сонгох/Шилжүүлэх
+
+
+ Export as Image...
+
+
+ Export as image
+
+
+ Export as PDF...
+
+
+ Export as SVG...
+
+
+ Add Scalebar
+
+
+ Add new scalebar
+ Хэмжээсийн багана шинээр нэмэх
+
+
+ Refresh
+
+
+ Refresh view
+ Үзүүлбэрийг сэргээх
+
+
+ Show Grid
+
+
+ Show grid
+
+
+ Ctrl+'
+
+
+ Snap to Grid
+
+
+ Snap to grid
+
+
+ Ctrl+Shift+'
+
+
+ Show Guides
+
+
+ Show guides
+
+
+ Ctrl+;
+
+
+ Snap to Guides
+
+
+ Snap to guides
+
+
+ Ctrl+Shift+;
+
+
+ Smart Guides
+
+
+ Smart guides
+
+
+ Ctrl+Alt+;
+
+
+ Clear Guides
+
+
+ Clear guides
+
Add Image
Дүрс нэмэх
-
- Zoom Full
- Бүтэн хэмжээ
-
-
- Composer
-
-
- Paper Navigation
-
-
- Composer Item Actions
-
-
- Composer Items
-
-
- Atlas
-
-
- Ctrl+P
- Ctrl+P
-
-
- Zoom full
-
-
- Ctrl+0
-
-
- Zoom in
- Томруулах
-
-
- Ctrl++
- Ctrl++
-
-
- Zoom out
- Багасгах
-
-
- Ctrl+-
- Ctrl+-
-
-
- Zoom to 100%
-
-
- Ctrl+1
-
-
- Zoom
- Өсгөх
-
-
- Add Map
-
-
- Add Label
-
-
- Move Item
-
-
- Export as Image...
-
-
- Export as image
-
-
- Export as PDF...
-
-
- Export as SVG...
-
-
- Add Scalebar
-
-
- Refresh
-
-
- Show Grid
-
-
- Show grid
-
-
- Ctrl+'
-
-
- Snap to Grid
-
-
- Snap to grid
-
-
- Ctrl+Shift+'
-
-
- Show Guides
-
-
- Show guides
-
-
- Ctrl+;
-
-
- Snap to Guides
-
-
- Snap to guides
-
-
- Ctrl+Shift+;
-
-
- Smart Guides
-
-
- Smart guides
-
-
- Ctrl+Alt+;
-
-
- Clear Guides
-
-
- Clear guides
-
Add image
-
Move Content
-
Move item content
-
Group items
-
Ctrl+G
-
Ungroup
-
Ungroup items
-
Ctrl+Shift+G
-
Raise
-
Raise selected items
-
Ctrl+]
-
Lower
-
Lower selected items
-
Ctrl+[
-
Bring to Front
-
Move selected items to top
-
Ctrl+Shift+]
-
Send to Back
-
Move selected items to bottom
-
Ctrl+Shift+[
-
Load from Template
-
Load from template
-
Save as Template
-
-
- Align Left
-
-
- Align Center
-
-
- Align Right
-
-
- Align Top
-
-
- Align Bottom
-
-
- &Undo
- &Буцаах
-
-
- &Redo
- &Дахих
-
-
- Add ellipse
-
-
- Add HTML
-
-
- Composer Manager
-
-
- Composer manager
- Хэвлэлийн эх бэлтгэгч
-
-
- &New Composer
-
-
- New composer
-
-
- Ctrl+N
- Ctrl+N
-
-
- &Save Project
- &Төсөл Хадгалах
-
-
- Save project
-
-
- Ctrl+S
- Ctrl+S
-
-
- &Duplicate Composer
-
-
- Duplicate composer
-
-
- New from Template
-
-
- New from template
-
-
- Lock Selected Items
-
-
- Ctrl+L
- Ctrl+L
-
-
- Unlock All
-
-
- Unlock All Items
-
-
- Ctrl+Shift+L
- Ctrl+Shift+L
-
-
- Pa&ste in Place
-
-
- Paste in place
-
-
- Ctrl+Shift+V
- Ctrl+Shift+V
-
-
- &Delete
-
-
- Delete selected items
-
-
- Del
-
-
- De&select All
-
-
- Deselect all
-
-
- Ctrl+Shift+A
- Ctrl+Shift+A
-
-
- Select &All
-
-
- Select all items
-
-
- Ctrl+A
- Ctrl+A
-
-
- &Invert Selection
-
-
- Invert selection
- Урвуу сонголт
-
-
- Select Next Item &Below
-
-
- Select next item below
-
-
- Ctrl+Alt+[
-
-
- Select Next Item &Above
-
-
- Select next item above
-
-
- Ctrl+Alt+]
-
-
- Pan Composer
-
-
- Composer Options...
-
-
- Show Rulers
-
-
- Show rulers
-
-
- Ctrl+R
- Ctrl+R
-
-
- First Feature
-
-
- Previous Feature
-
-
- Next Feature
-
-
- Last Feature
-
-
- Preview Atlas
-
-
- Print Atlas...
-
-
- Export Atlas as Images...
-
-
- Export Atlas as SVG...
-
-
- Export Atlas as PDF...
-
-
- Export Atlas as PDF
-
-
- Atlas Settings
-
Save as template
-
+
+ Align Left
+
Align selected items left
-
+
+ Align Center
+
Align center horizontal
-
+
+ Align Right
+
Align selected items right
-
+
+ Align Top
+
Align selected items to top
-
Align Center Vertical
-
Align center vertical
-
+
+ Align Bottom
+
Align selected items bottom
-
Quit
- Гарах
+
Add Arrow
-
-
- Add Table
-
-
- Add attribute table
-
-
- Page setup
-
-
- Ctrl+Shift+P
- Ctrl+Shift+P
-
-
- Add Rectangle
-
-
- Add rectangle
-
-
- Add Triangle
-
-
- Add triangle
-
-
- Add Ellipse
-
-
- Add html frame
-
Add arrow
-
+
+ Add Table
+
+
+ Add attribute table
+
Page Setup
-
- Undo
- Буцаах
+ Page setup
+
+
+ Ctrl+Shift+P
+
+
+ &Undo
+
+
+ &Redo
+
+
+ Ctrl+Shift+L
+
+
+ Pa&ste in Place
+
+
+ Paste in place
+
+
+ Ctrl+Shift+V
+
+
+ &Delete
+
+
+ Delete selected items
+
+
+ Del
+
+
+ De&select All
+
+
+ Deselect all
+
+
+ Ctrl+Shift+A
+
+
+ Select &All
+
+
+ Select all items
+
+
+ Ctrl+A
+
+
+ &Invert Selection
+
+
+ Invert selection
+
+
+ Select Next Item &Below
+
+
+ Select next item below
+
+
+ Ctrl+Alt+[
+
+
+ Select Next Item &Above
+
+
+ Select next item above
+
+
+ Ctrl+Alt+]
+
+
+ Pan Composer
+
+
+ Composer Options...
+
+
+ Show Rulers
+
+
+ Show rulers
+
+
+ Ctrl+R
+
+
+ First Feature
+
+
+ Previous Feature
+
+
+ Next Feature
+
+
+ Last Feature
+
+
+ Preview Atlas
+
+
+ Print Atlas...
+
+
+ Export Atlas as Images...
+
+
+ Export Atlas as SVG...
+
+
+ Export Atlas as PDF...
+
+
+ Export Atlas as PDF
+
+
+ Atlas Settings
+
Ctrl+Z
Ctrl+Z
-
- Redo
- Дахих
-
Restore last change
@@ -18599,23 +16641,143 @@ Please try a lower resolution or a smaller papersize
Ctrl+Shift+Z
Ctrl+Shift+Z
+
+ Add Rectangle
+
+
+ Add rectangle
+
+
+ Add Triangle
+
+
+ Add triangle
+
+
+ Add Ellipse
+
+
+ Add ellipse
+
+
+ Add HTML
+
+
+ Add html frame
+
+
+ Composer Manager
+
+
+ Composer manager
+
+
+ &New Composer
+
+
+ New composer
+
+
+ Ctrl+N
+
+
+ &Save Project
+
+
+ Save project
+
+
+ Ctrl+S
+
+
+ &Duplicate Composer
+
+
+ Duplicate composer
+
+
+ New from Template
+
+
+ New from template
+
+
+ Lock Selected Items
+
+
+ Ctrl+L
+
+
+ Unlock All
+
+
+ Unlock All Items
+
QgsComposerColumnAlignmentDelegate
Left
- Зүүн
+
Center
-
Right
- Баруун
+
@@ -18623,12 +16785,12 @@ Please try a lower resolution or a smaller papersize
Ascending
- Өсөх эрэмбээр
+
Descending
- Буурах эрэмбээр
+
@@ -18636,372 +16798,322 @@ Please try a lower resolution or a smaller papersize
Use existing frames
-
Extend to next page
-
Repeat on every page
-
Repeat until finished
-
-
- Use smart breaks changed
-
-
- General options
- Ерөнхий тохиргоо
+
Change html url
-
Select HTML document
-
Change resize mode
-
+
+ Use smart breaks changed
+
QgsComposerHtmlWidgetBase
-
- ...
- ...
-
-
- URL
- URL
-
HTML Frame
-
HTML frame
-
Main properties
-
- Refresh HTML
- URL
+
+
+ ...
+
Resize mode
-
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
- мм
+
-
-
- QgsComposerItem
- Change item position
- Байрлалыг өөрчлөх
+ Refresh HTML
+
QgsComposerItemWidget
- Frame color changed
Хүрээний өнгө өөрчлөгдлөө
- Background color changed
Дэвсгэр өнгө өөрчлөгдлөө
- Item outline width
-
-
- Item frame toggled
-
-
- Item position changed
-
- Item outline width
+
+
+ Item frame join style
-
- Item frame toggled
+
+
+ Item background toggled
-
- Select background color
- Дэвсгэр өнгө сонгох
+
- Select frame color
- Хүрээний өнгийг сонгоно уу
+
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
-
- Item rotation changed
-
QgsComposerItemWidgetBase
-
- Form
- Форм
-
-
- Frame color...
- Хүрээний өнгө...
-
-
- Background color...
- Дэвсгэр өнгө...
-
-
- Outline width
- Хүрээний өргөн
-
-
- Position and size...
- Байрлал, хэмжээ...
-
-
- Show frame
- Хүрээг харуулах
-
Global Options
-
- Position and size
-
- Reference point
-
- X
- X
+
- Y
- Y
+
- Width
- Өргөн
+
- Height
- Өндөр
+
- Page
+
+
+ Rotation
- Эргэлт
+
- °
-
- Frame
-
- Thickness
-
-
- Color...
-
-
- Page
-
-
- ...
- ...
-
-
- mm
- мм
+
- Join style
- Нэгтгэх хэлбэр
+
- Rendering
+
+
+ Blending mode
+
+
+ Thickness
+
+
+ Color...
+
+
+ Background
-
- Transparency
+
+
+ Item ID
ID
- Id
- Id
-
-
- Rendering
- Харгалзуузлах
-
-
- Blending mode
-
-
- Transparency
- Тунгалагжилт
+
QgsComposerLabelWidget
-
- General options
- Ерөнхий тохиргоо
-
Label text HTML state changed
-
Label text changed
-
Label font changed
-
Label margin changed
-
Label color changed
-
- Insert expression
-
- Label alignment changed
-
@@ -19009,112 +17121,105 @@ Please try a lower resolution or a smaller papersize
Label Options
- Шошгын горим
+
Label
- Шошго
+
Main properties
-
Render as HTML
-
Insert an expression
-
-
- Alignment
-
-
- Vertical
- Босоо
-
-
- Horizontal
- Хэвтээ
-
-
- Display
- Дэлгэц
-
-
- Margin
-
-
- mm
- мм
-
-
- Rotation
- Эргэлт
+
Font
- Үсгийн хэв
+
Font color...
-
- Left
- Зүүн
+ Alignment
+
- Center
-
-
- Right
- Баруун
+ Vertical
+
Top
- Дээд
+
Middle
-
Bottom
- Доод
+
- mm
- мм
+ Left
+
+
+ Center
+
+
+ Right
+
+
+ Horizontal
+
+
+ Display
+
+
+ Margin
+
+
+ mm
+
QgsComposerLegend
+ Legend
- Томъёолсон тэмдэг
+ Томъёолсон тэмдэг
@@ -19143,161 +17248,168 @@ Please try a lower resolution or a smaller papersize
Item
- Зүйл
+
Title style
-
Item wrapping changed
-
Legend title changed
-
Legend title alignment changed
-
Legend column count
-
Legend split layers
-
Legend equal column width
-
Legend symbol width
-
Legend symbol height
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
Legend group space
-
Legend layer space
-
Legend symbol space
-
Legend icon label space
-
Title font changed
-
Legend group font changed
-
Legend layer font changed
-
Legend item font changed
-
Legend font color changed
-
Legend box space
-
Legend map changed
-
Legend item edited
-
Legend updated
-
Legend group added
-
-
- Map %1
- Зураг %1
+
Map %1
+
+
+ None
- Үгүй
+
QgsComposerLegendWidgetBase
- Barscale Options
- Баганат хэмжээсийн горим
+ Legend Options
+
- General
- Ерөнхий
+ Legend
+
+
+ Main properties
+
&Гарчиг
- Title alignment:
- Map
+
- Left
- Зүүн
+ Wrap text on
+
- Center
- Legend items
+
- Right
- Баруун
-
-
- Update legend. User defined labels are preserved.
-
-
- Update item
-
-
- Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
-
-
- Update all
-
-
- ...
- ...
+ Add group
+ Бүлэг нэмэх
Show feature count for each class of vector layer.
-
-
- Auto update
-
Fonts
-
-
- Title Font...
- Гарчигийн үсгийн хэлбэр...
-
-
- Group Font...
- Бүлэг үсгийн хэлбэр...
-
-
- Title font...
-
-
- Subgroup font...
-
-
- Group font...
-
-
- Item font...
-
-
- Font color...
-
-
- Columns
- Багана
-
-
- Count
-
-
- Equal column widths
-
-
- Allow to split layer items into multiple columns.
-
-
- Split layers
-
-
- Symbol
- Тэмдэг
-
-
- Symbol width
-
-
- Symbol height
-
-
- WMS LegendGraphic
-
-
- Legend width
-
-
- Legend height
-
-
- Spacing
-
-
- Space above text using group style.
-
-
- Group Space
-
Space above text using subgroup style.
-
Subgroup space
-
Space above symbol and symbol label.
-
-
- Symbol space
-
-
- Space between symbol icon and symbol label (symbol label left margin).
-
-
- Icon label space
-
-
- Box space
-
Column space
-
- Space below title.
- Font color...
+
- Title space
- Columns
+
- mm
- мм
+ Count
+
+
+ Equal column widths
+
+
+ Allow to split layer items into multiple columns.
+
+
+ Split layers
+
+
+ Spacing
+
мм
- Map
- Зураг
+ Title alignment:
+
- Wrap text on
- Left
+
- Edit
- Хянах
+ Center
+
- All
- Бүгд
+ Right
+
- Add group
- Бүлэг нэмэх
+ Update legend. User defined labels are preserved.
+
- Legend Options
- Update item
+
- Legend
- Томъёолсон тэмдэг
+ Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
+
- Main properties
- Update all
+
- Update
- Шинэчлэх
+ ...
+
- Legend items
- Auto update
+
+
+ Title font...
+
+
+ Subgroup font...
+
+
+ Group font...
+
+
+ Item font...
+
+
+ Symbol
+
+
+ Symbol width
+
+
+ Symbol height
+
+
+ WMS LegendGraphic
+
+
+ Legend width
+
+
+ Legend height
+
+
+ Space above text using group style.
+
+
+ Group Space
+
+
+ Symbol space
+
+
+ Space between symbol icon and symbol label (symbol label left margin).
+
+
+ Icon label space
+
+
+ Box space
+
+
+ Space below title.
+
+
+ Title space
+
@@ -19595,7 +17668,7 @@ Please try a lower resolution or a smaller papersize
&Duplicate
-
Empty composer
-
Specific
-
Template error
-
Error, template file not found
-
Error, could not read file
- Алдаа, ажлыг уншихад
+
Composer error
-
Error, could not create composer
-
Loading template into composer...
-
Error, could not load template file
-
Choose template
-
Composer templates
-
File system error
-
Error, could not open or create local directory
-
Remove composer
-
Do you really want to remove the map composer '%1'?
-
copy
-
Duplicating composer...
-
Duplicate Composer
-
Composer duplication failed.
-
-
- Change title
- Гарчиг өөрчлөх
-
-
- Title
- Гарчиг
+
@@ -19723,7 +17788,7 @@ Please try a lower resolution or a smaller papersize
New from template
-
...
- ...
+
Open template directory
-
user
-
default
- өгөгдмөл
+
QgsComposerMap
- Map %1
Зураг %1
- Map will be printed here
Зураг энд хэвлэгдэх болно
-
- Grid %1
-
QgsComposerMapWidget
- General options
- Ерөнхий тохиргоо
+ Cache
+
+
+ Render
+
Cache
- Cache
+ Rectangle
+
Rectangle
- Тэгшөнцөгт
+ Solid
+
- Solid
- Битүү
+ Cross
+
Cross
-
-
- Decimal
-
-
- DegreeMinute
-
-
- DegreeMinuteSecond
-
-
- Zebra
-
-
- Select font color
- Үсгийн өнгийг сонгох
-
-
- Inside frame
-
-
- Outside frame
-
-
- Horizontal
- Хэвтээ
-
-
- Vertical
- Босоо
-
-
- Map scale changed
-
Markers
- DegreeMinute
+
+
+ DegreeMinuteSecond
+
+
+ No frame
+
+
+ Zebra
+
+
+ Map scale changed
+
+
+ Map rotation changed
+
+
+ Map extent changed
+
+
+ Select font color
+
Select grid frame color
-
Select grid frame fill color
-
- Map rotation changed
-
-
- Map extent changed
-
-
- Canvas items toggled
-
- None
-
- Overview frame style changed
-
- Overview centering mode changed
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
- Миллметр
-
-
- Centimeter
-
-
- change...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
-
- Grid interval changed
-
- Grid offset changed
-
- Grid line style changed
-
- Grid type changed
-
- Grid cross width changed
+
+
+ Annotation font changed
-
- Label font changed
+
+
+ Annotation distance changed
-
- Annotation format changed
-
- Changed grid frame style
-
-
- Changed grid frame line thickness
-
-
- Grid frame color changed
-
-
- Grid frame first fill color changed
-
-
- Grid frame second fill color changed
-
-
- Disabled
-
-
- Annotation position changed
-
-
- Map %1
- Зураг %1
-
-
- Annotation toggled
-
- Changed annotation direction
-
-
- Changed annotation precision
-
- Render
- Орлуулга
+ Changed grid frame style
+
+
+ Changed grid frame width
+
+
+ Changed grid frame line thickness
+
+
+ Grid frame color changed
+
+
+ Grid frame first fill color changed
+
+
+ Grid frame second fill color changed
+
+
+ Inside frame
+
+
+ Outside frame
+
+
+ Disabled
+
+
+ Horizontal
+
+
+ Vertical
+
+
+ Annotation position changed
+
+
+ Changed annotation direction
+
+
+ Map %1
+
QgsComposerMapWidgetBase
- Map options
- Зургийн сонголт
+ Map Options
+
- Map
Зураг
- Width
- Өргөн
+ Main properties
+
- Height
- Өндөр
+ Update preview
+ Тоймыг шинэчлэх
- Scale
Масштаб
- Rotation
- Эргэлт
+ Map rotation
+
- degrees
- өнцөг
-
-
- Draw map canvas items
-
- Interval
- Lock layers for map item
+
- X
-
-
- ...
- ...
-
-
- °
-
-
- View extent in map canvas
-
-
- Controlled by atlas
-
-
- Margin around feature
-
-
- %
- %
-
-
- Fixed scale
-
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
-
- Predefined scale (best fit)
-
-
- Y
-
-
- Offset
-
-
- mm
- мм
-
-
- Line style
-
-
- change...
-
-
- Blend mode
-
-
- Grid frame
-
-
- Frame size
-
-
- Frame line thickness
-
-
- Color...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
-
-
- CRS
-
-
- Interval units
-
-
- Map unit
-
-
- Millimeter
- Миллметр
-
-
- Centimeter
-
-
- No frame
-
-
- Zebra
-
-
- Frame fill colors
-
-
- Draw coordinates
-
-
- Format
- Хэлбэр
-
-
- Left
- Зүүн
-
-
- Right
- Баруун
-
-
- Top
- Дээд
-
-
- Bottom
- Доод
-
-
- Font
- Үсгийн хэв
-
-
- Font color
- Үсгийн өнгө
-
-
- Font color...
-
-
- Marker style
-
-
- Overview
- Ерөнхий тойм
-
-
- Overview frame
-
-
- Overview style
-
-
- Change...
-
-
- Overview blending mode
-
-
- Invert overview
-
-
- Center on overview
-
-
- Extents
-
- X min
- X ХБ
-
-
- Y min
- Y ХБ
-
-
- Grid
- Тор
-
-
- Show grid?
- Тор харуулах уу?
-
-
- Grid &type
- Торны &төрөл
-
-
- Interval X
- Х интервал
-
-
- Line width
- Шугамын өргөн
-
-
- Line color
- Шугамын өнгө
-
-
- Interval Y
- Y интервал
-
-
- Cross width
-
-
- X max
X ХИ
- Map Options
- Y min
+ Y ХБ
- Main properties
-
-
- Map rotation
-
-
- Y max
Y ХИ
- Set to map canvas extent
-
- Lock layers for map item
- X min
+ X ХБ
+
+
+ View extent in map canvas
+
+
+ Controlled by atlas
+
+
+ Margin around feature
+
+
+ %
+
+
+ Fixed scale
+
+
+ Use one of the predefined scales of the project where the atlas feature best fits.
+
+
+ Predefined scale (best fit)
+
+
+ Show grid
+
+
+ Grid &type
+ Торны &төрөл
+
+
+ Offset
+
+
+ mm
+
+
+ Blend mode
+
+
+ Interval
+
+
+ Grid frame
+
+
+ Frame size
+
+
+ Frame line thickness
+
+
+ Color...
+
+
+ Frame fill colors
+
+
+ Overview blending mode
+
+
+ Invert overview
+
+
+ Center on overview
+
+
+ X
+
+
+ °
+
+
+ Y
+
+
+ Cross width
+
+
+ Frame style
+
+
+ Line style
+
+
+ change...
+
+
+ Draw coordinates
+
+
+ Format
+
+
+ Left
+
+
+ Right
+
+
+ Top
+
+
+ Bottom
+
+
+ Font
+
Frame style
-
-
- Frame width
- Хүрээний өргөн
-
-
- Font...
Үсгийн хэв...
- Distance to map frame
Зургийн хүрээ хүртэлх зай
- Coordinate precision
-
- Preview
- Тойм
+ Font color...
+
- Update preview
- Тоймыг шинэчлэх
+ Overview
+
+
+ Overview frame
+
+
+ Overview style
+
+
+ Change...
+
@@ -20527,127 +18388,123 @@ Please try a lower resolution or a smaller papersize
Change item position
- Байрлалыг өөрчлөх
+
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
-
- Picture expression eval error: %1
-
QgsComposerPictureWidget
-
- General options
- Ерөнхий тохиргоо
-
Select svg or image file
-
Picture changed
-
- Expression based image path
-
- Picture rotation changed
-
- Select new preview directory
-
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
-
- Rotation map changed
-
- Map %1
- Зураг %1
+
- Creating icon for file %1
- %1 ажилд icon үүсгэх
+
@@ -20657,114 +18514,116 @@ Please try a lower resolution or a smaller papersize
Picture Options
Зургийн Тохиргоо
-
- Picture options
- Зургийн Тохиргоо
-
Picture
-
Main properties
-
-
- Path
-
Image source
-
- Placement
- Path
+
- Resize mode
-
-
- Zoom
- Өсгөх
-
-
- Stretch
-
-
- Clip
-
-
- Zoom and resize frame
-
-
- Resize frame to image size
- ...
+ ...
Expression
-
+
+ Resize mode
+
+
+ Placement
+
+
+ Zoom
+
+
+ Stretch
+
+
+ Clip
+
+
+ Zoom and resize frame
+
+
+ Resize frame to image size
+
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
-
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Loading previews...
-
Image search paths
-
+
+ Remove
+ Хасах
Image rotation
-
-
- °
-
-
- Remove
- Хасах
-
-
- Preview
- Тойм
-
-
- Options
- Тохиргоо
-
-
- Load
- Дуудах
-
-
- ...
- ...
-
-
- Width
- Өргөн
-
-
- Height
- Өндөр
-
-
- Rotation
- Эргэлт
+
Sync with map
-
+
+ °
+
QgsComposerScaleBar
- units
-
- km
-
- m
-
- miles
-
- ft
-
- Nm
-
QgsComposerScaleBarWidget
-
- General options
- Ерөнхий тохиргоо
-
Single Box
-
Double Box
-
Line Ticks Middle
-
Line Ticks Down
-
Line Ticks Up
-
Numeric
-
Left
- Зүүн
+
Middle
-
Right
- Баруун
+
Map units
- Зургийн нэгж
+
Meters
- Метр
+
Feet
-
Nautical Miles
-
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Үсгийн өнгийг сонгох
-
-
- Select stroke color
-
-
- Map %1
- Зураг %1
+
- Scalebar map changed
-
- Scalebar line width
-
- Scalebar segment size
-
- Scalebar segments left
-
- Number of scalebar segments changed
-
- Scalebar height changed
-
- Scalebar font changed
-
- Scalebar font color changed
-
- Scalebar color changed
-
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
-
- Scalebar unit text
-
- Scalebar map units per segment
-
- Scalebar style changed
-
- Scalebar label bar space
-
- Scalebar box content space
-
- Scalebar alignment
-
- Scalebar changed to map units
-
- Scalebar changed to feet
-
- Scalebar changed to nautical miles
-
- Scalebar changed to meters
-
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -21096,53 +18896,73 @@ Please try a lower resolution or a smaller papersize
Barscale Options
- Баганат хэмжээсийн горим
+
- Map units per bar unit
- Scalebar
+
+
+ Main properties
+
+
+ Map
+
+
+ Style
+
Units
- Нэгж
+
Label
- Шошго
+
+
+ Map units per bar unit
+
Segments
- Хэсэг
+
left
-
right
-
Size
- Хэмжээ
+
units
-
Height
- Өндөр
+
mm
- мм
+
Display
- Дэлгэц
+
Box margin
-
Labels margin
-
Line width
- Шугамын өргөн
+
Join style
- Нэгтгэх хэлбэр
+
Cap style
-
-
- Fonts and colors
-
-
- Font color...
-
-
- Fill color...
-
-
- Secondary fill color...
-
-
- Stroke color...
-
-
- Line width
- Шулууны өргөн
+
Alignment
-
- Style
- Загвар
-
-
- Scalebar
-
-
- Main properties
-
-
- Map
- Зураг
-
-
- Unit label
- Нэгжийн шошго
+ Fonts and colors
+
Font...
- Үсгийн хэв...
+
+
+ Font color...
+
+
+ Fill color...
+
+
+ Stroke color...
+
QgsComposerShapeWidget
-
- General options
- Ерөнхий тохиргоо
-
Ellipse
-
Rectangle
- Тэгшөнцөгт
+
Triangle
-
- Shape style changed
-
- Shape radius changed
-
- Shape type changed
-
@@ -21305,49 +19088,27 @@ Please try a lower resolution or a smaller papersize
Main properties
-
Corner radius
-
mm
- мм
+
Style
- Загвар
+
Change...
-
-
- Rotation
- Эргэлт
-
-
- Shape outline color...
- Дүрсийн хүрээний өнгө...
-
-
- Outline width
- Хүрээний өргөн
-
-
- Shape fill Color...
- Дүрсийн будах өнгө...
-
-
- Rotation
- Rotation
- Rotation
- Эргэлт
+
@@ -21355,30 +19116,26 @@ Please try a lower resolution or a smaller papersize
Descending
- Буурах эрэмбээр
+
Ascending
- Өсөх эрэмбээр
+
Attribute
-
Sort Order
-
QgsComposerTableWidget
-
- General options
- Ерөнхий тохиргоо
-
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
-
Table header alignment changed
-
Table map changed
-
Table maximum columns
-
Table header font
- Хүснэгтийн толгойн
+
Table content font
-
Table grid stroke
-
Select grid color
-
Table grid color
-
Table grid toggled
-
Table visible only toggled
-
QgsComposerTableWidgetBase
-
- Table
- Хүснэгт
-
-
- Layer
- Давхарга
-
-
- Attributes...
-
-
- Show only visible features
-
-
- Composer map
-
Attribute Table
- Атирбут Хүснэгт
+
Attribute table
-
Main properties
-
- Refresh table data
- Layer
+
- Filter with
- Attributes...
+
- ...
- ...
+ Composer map
+
Maximum rows
-
Margin
-
+
+ Show only visible features
+
+
+ Refresh table data
+
+
+ Filter with
+
+
+ ...
+
mm
- мм
+
Show grid
-
Stroke width
-
Color...
-
Fonts
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
- Зүүн
+
Center
-
Right
- Баруун
+
@@ -21607,9 +19360,9 @@ Please try a lower resolution or a smaller papersize
Вектор тайлбарын горимууд
- Title
- Гарчиг
+ Preview
+ Тойм
Зураг
- Font
- Үсгийн хэв
+ Title
+ Гарчиг
+
+
+ Layers
+
+
+ Group
+
+
+ ID
+
Хайрцаг
- Preview
- Тойм
-
-
- Layers
- Давхарга
-
-
- Group
- Бүл
-
-
- ID
- ID
+ Font
+ Үсгийн хэв
QgsComposerView
- Quantum GIS
- Quantum GIS
+ QGIS
+
+
+ Label added
+
+
+ Scale bar added
+
+
+ Legend added
+
+
+ Picture added
+
+
+ Table added
+
+
+ Shape added
+
Move item content
-
+
+ Arrow added
+
+
+ Map added
+
Html item added
-
Html frame added
-
Item moved
-
Zoom item content
-
-
- Arrow added
-
-
- Label added
-
-
- Map added
-
-
- Scale bar added
-
-
- QGIS
- QGIS
-
-
- Legend added
-
-
- Picture added
-
-
- Shape added
-
-
- Table added
-
QgsComposition
- Label added
-
- Map added
-
- Arrow added
-
- Scale bar added
-
- Shape added
-
- Picture added
-
- Legend added
-
- Table added
-
+
+ Aligned items left
+
+
+ Aligned items horizontal center
+
+
+ Aligned items vertical center
+
Aligned items left
-
-
- Aligned items horizontal center
-
-
- Aligned items vertical center
-
-
- Aligned items right
-
- Aligned items top
-
- Aligned items bottom
-
- Items locked
-
- Items unlocked
-
- Item z-order changed
-
- Remove item group
-
- Frame deleted
-
- Item deleted
-
- Multiframe removed
-
@@ -21875,36 +19624,6 @@ Please try a lower resolution or a smaller papersize
QgsCompositionWidget
-
- Landscape
- Хэвтээ
-
-
- Portrait
- Босоо
-
-
- ANSI A (Letter; 8.5x11 inches)
- ANSI A (Letter; 8.5x11 inches)
-
-
- Custom
- Хэрэглэгчийн
-
-
- A5 (148x210 mm)
- A5 (148x210 мм)
-
mm
@@ -21916,141 +19635,151 @@ Please try a lower resolution or a smaller papersize
инч
- Map %1
- Зураг %1
+ Landscape
+ Хэвтээ
- Portrait
+ Босоо
+
+
+ Map %1
+
+
+ A5 (148x210 mm)
+ A5 (148x210 мм)
+
+
+ A4 (210x297 mm)
A4 (210x297 мм)
- A3 (297x420 mm)
A3 (297x420 мм)
- A2 (420x594 mm)
A2 (420x594 мм)
- A1 (594x841 mm)
A1 (594x841 мм)
- A0 (841x1189 mm)
A0 (841x1189 мм)
- B5 (176 x 250 mm)
B5 (176 x 250 мм)
- B4 (250 x 353 mm)
B4 (250 x 353 мм)
- B3 (353 x 500 mm)
B3 (353 x 500 мм)
- B2 (500 x 707 mm)
B2 (500 x 707 мм)
- B1 (707 x 1000 mm)
B1 (707 x 1000 мм)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 мм)
- Legal (8.5x14 in)
-
- ANSI A (Letter; 8.5x11 in)
-
- ANSI B (Tabloid; 11x17 in)
-
- ANSI C (17x22 in)
-
- ANSI D (22x34 in)
-
- ANSI E (34x44 in)
-
- Arch A (9x12 in)
-
- Arch B (12x18 in)
-
- Arch C (18x24 in)
-
- Arch D (24x36 in)
-
- Arch E (36x48 in)
-
- Arch E1 (30x42 in)
-
- Legal (8.5x14 inches)
- Зөвшөөрөгдсөн (8.5x14 инч)
-
-
- Solid
- Битүү
-
-
- Dots
- Цэг
-
-
- Crosses
- Хэрээс
+ Custom
+ Хэрэглэгчийн
@@ -22058,167 +19787,194 @@ Please try a lower resolution or a smaller papersize
Composition
- Бүрдэл
-
-
- Presets
-
-
- ...
- ...
-
-
- Width
- Өргөн
-
-
- Height
- Өндөр
-
-
- Orientation
- Чиглэл
-
-
- World file on
-
-
- Change...
-
-
- Page background
-
-
- Guides and Grid
-
-
- Grid spacing
-
-
- Snap tolerance
-
-
- px
-
-
- Grid
- Тор
-
-
- mm
- мм
-
-
- Grid offset
-
-
- x:
-
-
- y:
-
-
- Units
- Нэгж
+
Paper and quality
-
- Size
- Хэмжээ
+ Presets
+
- dpi
- Width
+
- Height
+
+
+ Units
+
+
+ Number of pages
-
+
+ Orientation
+
+
+ Export resolution
+
+
+ Print as raster
+
+
+ Change...
+
Export resolution
- Page background
+
- Print as raster
- Grid
+
+
+ dpi
+
+
+ World file on
+
+
+ mm
+
+
+ Grid offset
+
+
+ x:
+
+
+ y:
+
+
+ Spacing
+
+
+ Snap to alignments
+
+
+ Tolerance
+
QgsConfigureShortcutsDialog
+
+ Configure shortcuts
+
+
+ Action
+
+
+ Shortcut
+
+
+ Change
+
+
+ Set none
+
+
+ Set default
+
+
+ Load...
+
+
+ Save...
+
Save shortcuts
-
XML file
-
All files
- Бүх ажил
+
Saving shortcuts
-
Cannot write file %1:
%2.
-
Load shortcuts
-
Loading shortcuts
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an shortcuts exchange file.
-
The file contains shortcuts created with different locale, so you can't use it.
-
None
- Үгүй
+
Set default (%1)
-
Input:
-
-
- Change
- Өөрчлөлт
+
Shortcut conflict
-
This shortcut is already assigned to action %1. Reassign?
-
-
- Configure shortcuts
-
-
- Action
-
-
- Shortcut
-
-
- Set none
-
-
- Set default
-
-
- Load...
-
-
- Save...
-
@@ -22322,55 +20037,36 @@ Please try a lower resolution or a smaller papersize
Error starting help viewer [%1]
-
Context help
-
<h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
-
-
-
- QgsContinuousColorDialogBase
-
- Continuous color
- Үргэлжилсэн өнгө
-
-
- Maximum value
- Хамгийн их утга
-
-
- Outline width
- Хүрээний өргөн
-
-
- Minimum value
- Хамгийн бага утга
+
QgsCoordinateTransform
+
+ The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
+
CRS
-
-
- The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
%1 of
%2PROJ.4: %3 +to %4
Error: %5
-
-
-
- QgsCopyrightLabelPlugin
-
- Bottom Left
- Зүүн доод
-
-
- Top Left
- Зүүн дээд
-
-
- Top Right
- Баруун дээд
-
-
- Bottom Right
- Баруун доод
-
-
- &Copyright Label
- &Зохиогчийн эрхийн тэмдэг
-
-
- Creates a copyright label that is displayed on the map canvas.
- Зурагт тавих зохиогчийн эрхийн тэмдэг бэлтгэнэ.
-
-
- &Decorations
- &Чимэглэл
-
-
-
- QgsCopyrightLabelPluginGuiBase
-
- Copyright Label Plugin
- Зохиогчийн Эрхийн тэмдгийн Өргөтгөл
-
-
- Bottom Left
- Зүүн Доод
-
-
- Top Left
- Зүүн Дээд
-
-
- Bottom Right
- Баруун Доод
-
-
- Top Right
- Баруун Дээд
-
-
- Horizontal
- Хэвтээ
-
-
- Vertical
- Босоо
+
@@ -22457,12 +20091,12 @@ Error: %5
Name
- Нэр
+
Info
- Мэдээ
+
@@ -22470,27 +20104,27 @@ Error: %5
colors
-
-
- continuous
-
-
- continuous (multi)
-
discrete
-
+
+ continuous
+
+
+ continuous (multi)
+
variants
-
@@ -22498,24 +20132,24 @@ Error: %5
Selections by theme
-
All by author
-
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
All Ramps (%1)
-
%1 directory details
-
%1 gradient details
-
@@ -22548,53 +20182,53 @@ and current file is [%3]
cpt-city color ramp
-
Selection and preview
-
License
-
Palette
- Өнгөний хослол
+
Path
-
Information
- Мэдээлэл
+
Author(s)
-
Source
- Эх
+
Details
-
Save as standard gradient
-
@@ -22602,7 +20236,7 @@ and current file is [%3]
Enter Credentials
-
Realm
-
@@ -22631,32 +20265,11 @@ and current file is [%3]
Control rendering order
-
QgsCustomProjectionDialog
-
- Delete Projection Definition?
- Проекцийн тодорхойлолтыг хасах уу?
-
-
- Deleting a projection definition is not reversable. Do you want to delete it?
- Хасагдсан проекцийн тодорхойлолт дахин сэргээгдэхгүй. Та хасахыг хүсч байна уу?
-
-
- Abort
- Таслах
-
-
- New
- Шинэ
-
-
- new CRS
-
QGIS Custom Projection
QGIS Хэрэглэгчийн Проекц
-
- The proj4 definition of '%1' is not valid.
-
This proj4 projection definition is not valid.
Энэ proj4 элипсоидын тодорхойлолт буруу.
+
+ new CRS
+
+
+ The proj4 definition of '%1' is not valid.
+
Northing and Easthing must be in decimal form.
@@ -22689,50 +20307,50 @@ and current file is [%3]
Error
- Алдаа
-
-
- This proj4 ellipsoid definition is not valid. Please add a ellips= clause before pressing save.
- COMMENTED OUT
- Энэ proj4 элипсоидын тодорхойлолт буруу. Хадгалах товчлуур дарахаас өмнө ellips= clause өгнө үү.
+
QgsCustomProjectionDialogBase
- |<
- |<
-
-
- <
- <
-
-
- 1 of 1
- 1 von 1
-
-
- >
- >
-
-
- >|
- >|
+ Custom Coordinate Reference System Definition
+
Define
Тодорхойлох
+
+ ID
+
+
+ You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
+
+
+ Name
+
+
+ Parameters
+
Test
Testen
- Calculate
- Berechnen
+ Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
+
Geographisch/ WGS84
- Name
- Нэр
-
-
- Parameters
- Үзүүлэлт
-
-
- *
- *
-
-
- S
- Ө
-
-
- X
- X
+ Destination CRS
+
North
- Хойд
+
East
- Дорнод
-
-
- Custom Coordinate Reference System Definition
-
-
- ID
- ID
-
-
- You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
-
Name:
- Нэр:
+
Parameters:
-
Copy
existing CRS
-
Add new CRS
-
Remove
- Хасах
+
- Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
-
-
- Destination CRS
- Calculate
+ Berechnen
@@ -22828,29 +20409,29 @@ and current file is [%3]
Object name
-
Label
- Шошго
+
Description
- Тайлбар
+
Choose a customization INI file
-
Customization files (*.ini)
-
@@ -22858,62 +20439,62 @@ and current file is [%3]
Customization
-
Enable customization
-
toolBar
-
Catch
-
Switch to catching widgets in main application
-
Save
- Хадгалах
+
Save to file
-
Load
- Дуудах
+
Load from file
-
Expand All
-
Collapse All
-
Select All
-
@@ -22939,232 +20520,232 @@ and current file is [%3]
Description...
-
Edit...
- Засах...
+
Paste
-
Copy
- Хуулах
+
Clear
- Цэвэрлэх
+
string
-
int
-
double
-
Field type:
-
integer
-
unknown type
-
Data defined override
-
expression
-
field
- талбар
+
Deactivate
-
Activate
-
Attribute field
-
No matching field types found
-
Expression
-
Current:
-
Data definition description
-
undefined
-
Parse error: %1
-
'%1' field missing
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
yes
- тийм
+
no
- үгүй
+
<b>Usage:</b><br>%1<br>
-
<b>Expected input:</b><br>%1<br>
-
<b>Valid input types:</b><br>%1<br>
-
<b>Current definition %1:</b><br>%2
-
string
-
bool [<b>1</b>=True|<b>0</b>=False]
-
string of variable length
-
int [<= 0 =>]
-
int [>= 0]
-
int [>= 1]
-
double [<= 0.0 =>]
-
double [>= 0.0]
-
double coord [<b>X,Y</b>] as <= 0.0 =>
-
double [-180.0 - 180.0]
-
int [0-100]
-
string [<b>r,g,b</b>] as int 0-255
-
string [<b>r,g,b,a</b>] as int 0-255
-
@@ -23172,61 +20753,57 @@ and current file is [%3]
Data defined properties
-
Property
- Мөнчанар
-
-
- Field
- Талбар
+
Expression
-
Help
-
double
-
'<red>,<green>,<blue>,<alpha>'
-
'<filename>'
-
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -23234,68 +20811,68 @@ and current file is [%3]
Form
-
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
- өгөгдмөл
+
custom
-
preview
-
@@ -23303,13 +20880,13 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
unknown
- мэдэгдэхгүй
+
@@ -23317,69 +20894,65 @@ and current file is [%3]
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Destination CRS
-
Source CRS
-
Layer
- Давхарга
+
QgsDbSourceSelectBase
-
- Add PostGIS Table(s)
- PostGIS хүснэгт нэмэх
-
Add PostGIS layers
-
Connections
-
Connect
- Холбох
+
New
- Шинэ
+
Load
Load connections from file
- Дуудах
+
Save connections to file
- Холболтыг файл болгон хадгалах
+
Save
- Хадгалах
+
Also list tables with no geometry
-
Hold dialog open
-
Search options
- Хайлтын тохиогоо
+
Search
- Хайх
+
Search mode
-
Search in columns
- Баганад хайх
-
-
-
- QgsDbTableModel
-
- Schema
- Бүдүүвч
-
-
- Table
- Хүснэгт
-
-
- Type
- Төрөл
-
-
- Geometry column
- Геометр багана
-
-
- Sql
- Sql
-
-
- Point
- Цэг
-
-
- Line
- Шугам
-
-
- Polygon
- Олонталт
+
@@ -23501,75 +21039,71 @@ and current file is [%3]
Copyright Label Decoration
-
Enable copyright label
-
&Enter your copyright label here:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
&Placement
-
Bottom Left
-
Top Left
-
Bottom Right
-
Top Right
-
&Orientation
-
Horizontal
- Хэвтээ
+
Vertical
- Босоо
+
Color
- Өнгө
-
-
- &Color
- &Өнгө
+
@@ -23580,154 +21114,150 @@ p, li { white-space: pre-wrap; }
Error
- Алдаа
+
No active layer
-
Please select a raster layer
-
Invalid raster layer
-
Layer CRS must be equal to project CRS
-
QgsDecorationGridDialog
-
- Dialog
- Харилцах цонх
-
Grid properties
-
Enable grid
-
Interval X
- Х интервал
+
Interval Y
- Y интервал
+
Grid type
-
Line symbol
-
Draw annotation
-
Annotation direction
-
Font...
- Үсгийн хэв...
+
Distance to map frame
- Зургийн хүрээ хүртэлх зай
+
Coordinate precision
-
Marker symbol
-
Offset X
-
Offset Y
-
Update Interval / Offset from
-
Canvas Extents
-
Active Raster Layer
-
Line
-
Marker
- Тэмдэглэгч
+
Horizontal
- Хэвтээ
+
Vertical
- Босоо
+
Boundary direction
-
Horizontal and Vertical
-
@@ -23763,62 +21293,62 @@ p, li { white-space: pre-wrap; }
North Arrow Decoration
-
Preview of north arrow
- Хойтзүг тэмдэг үзэх
+
Angle
- Өнцөг
+
Placement
-
Placement on screen
- Дэлгэц дээрхи байршуулалт
+
Top Left
-
Top Right
-
Bottom Left
-
Bottom Right
-
Enable North Arrow
- Хойтзүг Тэмдэг Зөвшөөрөх
+
Set direction automatically
- Чиглэлийг автоматаар тохируулах
+
Pixmap not found
- Пиксзураг олдсонгүй
+
@@ -23826,102 +21356,102 @@ p, li { white-space: pre-wrap; }
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
Tick Down
- Доош Тэмдэглэх
+
Tick Up
- Дээш Тэмдэглэх
+
Bar
- Багана
+
Box
-
km
- км
+
mm
- мм
+
cm
- см
+
m
- м
+
miles
-
mile
- мил
+
inches
-
foot
- foot
+
feet
- Fuß
+
degree
- өнцөг
+
degrees
- өнцөг
+
unknown
- мэдэгдэхгүй
+
@@ -23929,97 +21459,97 @@ p, li { white-space: pre-wrap; }
Scale Bar Decoration
-
Placement
-
Top Left
-
Top Right
-
Bottom Left
-
Bottom Right
-
Scale bar style
-
Select the style of the scale bar
- Хэмжээсийн баганын загварыг сонгох
+
Tick Down
- Доош Тэмдэглэх
+
Tick Up
- Дээш Тэмдэглэх
+
Box
-
Bar
- Багана
+
Color of bar
-
Size of bar
-
Enable scale bar
- Хэмжээсийн баганыг зөвшөөрөх
+
Automatically snap to round number on resize
- Хэмжээг өөрчлөхдөө автоматаар бүдүүвчилнэ
+
metres/km
- метр/км
+
feet/miles
-
degrees
- өнцөг
+
@@ -24030,183 +21560,17 @@ p, li { white-space: pre-wrap; }
Атрибутыг Устгах
-
- QgsDelimitedTextPlugin
-
- &Add Delimited Text Layer
- Зааглагдсан Текстэн Давхарга &Нэмэх
-
-
- Add a delimited text file as a map layer. The file must have a header row containing the field names. The file must either contain X and Y fields with coordinates in decimal units or a WKT field.
- Зааглагдсан текстэн ажлыг зургийн давхаргаар нэмэх. Тухайн ажил нь талбарын нэрүүдийг агуулсан толгой мөртэй байх ёстой ба мөн солбицлын утга агуулсан X Y багана аль эсвэл WKT талбартай байх хэрэгтэй.
-
-
- &Delimited text
- &Товч бичиг
-
-
- DelimitedTextLayer
- ЗааглагдсанТекстэнДавхарга
-
-
-
- QgsDelimitedTextPluginGui
-
- No layer name
- Давхаргын нэр алга
-
-
- Please enter a layer name before adding the layer to the map
- Давхаргыг зурагт нэмэхийн өмнө нэрийг нь оруул
-
-
- All files
- Бүх ажил
-
-
- No delimiter
- Тусгаарлагч алга
-
-
- Please specify a delimiter prior to parsing the file
- Файл задлахаас өмнө тусгаарлагчийг заана уу
-
-
- Choose a delimited text file to open
- Нээхээр завдаж буй товч бичгийн файл сонгох
-
-
-
- QgsDelimitedTextPluginGuiBase
-
- Create a Layer from a Delimited Text File
- Товч Бичгийн Файлаас Давхарга Үүсгэх
-
-
- File Name
- Файлын нэр
-
-
- Browse...
- Зам заах...
-
-
- Space
- Хоорондын зай
-
-
- X Y fields
- X Y талбар
-
-
- <p align="right">X field</p>
- <p align="right">X Feld</p>
-
-
- Name of the field containing x values
- x-ийн утгыг агуулах талбарын нэр
-
-
- Name of the field containing x values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- x-ийн утгыг агуулах талбарын нэр. Жагсаалтаас нэг талбар сонго. Товч бичгийн файлын удиртгал мөрийг задлан жагсаалт гаргана.
-
-
- <p align="right">Y field</p>
- <p align="right">Y Feld</p>
-
-
- Name of the field containing y values
- y-ийн утга агуулах талбарын нэр
-
-
- Type
- Төрөл
-
-
- Name of the field containing y values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- y-ийн утга агуулах талбарын нэр. Жагсаалтаас нэг талбар сонго. Товч бичгийн файлын удиртгал мөрийг задлан жагсаалт гаргана.
-
-
- Layer name
- Давхаргын нэр
-
-
- Name to display in the map legend
- Зургийн тайлбарт үзүүлэх нэр
-
-
- Name displayed in the map legend
- Зургийн тайлбарт үзүүлэх нэр
-
-
- Delimiter
- Тусгаарлагч
-
-
- Delimiter to use when splitting fields in the text file. The delimiter can be more than one character.
- Бичгэн файл доторхи талбарыг хуваахад ашиглах тусгаарлагч. Тусгаарлагч нэг тэмдэгтээс олон байж болно.
-
-
- Delimiter to use when splitting fields in the delimited text file. The delimiter can be 1 or more characters in length.
- Товч бичгийн файл доторхи талбарыг хуваахад ашиглах тусгаарлагч. Тусгаарлагч 1 эсвэл түүнээс олон тэмдэгт байж болно.
-
-
- Delimited text file
- Товч бичгийн файл
-
-
- Full path to the delimited text file
- Товч бичгийн файлын бүтэн зам
-
-
- Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
- Товч бичгийн файлын бүтэн зам. Файл доторхи талбарыг тайлахын тулд файлын нэрийг өгөхөөс өмнө тусгаарлагчийг тодорхойлох ёстой. Оролтын файлыг сонгохын тулд энэ талбарын баруун талын Хайх товчийг ашигла.
-
-
- ...
- ...
-
-
- Browse to find the delimited text file to be processed
- Боловсруулах товч бичгийн файлыг хайж олох
-
-
- Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
- Товч бичгийн файлын байрлалыг хайхад энэ товчийг ашигла. </i> цонхны <i> дотор хязгаарлагчийг оруулаагүй үед энэ товч идэвхжихгүй. Ямар нэг файл сонгосон л бол товч бичгийн файлын талбарууд X ба Y талбарын зөөх-оруулах цонхонд орно.
-
-
- WKT field
- WKT талбар
-
-
- Sample text
- Загвар бичиг
-
-
- Regular expression
- Энгийн илэрхийлэл
-
-
QgsDelimitedTextProvider
-
- Error
- Алдаа
-
-
- Note: the following lines were not loaded because Qgis was unable to determine values for the x and y coordinates:
-
- Тэмдэглэл: QGIS x y-ийн утгыг тодорхойлж болохгүй байгаа учраас дараах шулуунууд ачаалагдсангүй:
-
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -24292,122 +21656,122 @@ p, li { white-space: pre-wrap; }
No layer name
- Давхаргын нэр алга
+
Please enter a layer name before adding the layer to the map
- Давхаргыг зурагт нэмэхийн өмнө нэрийг нь оруул
+
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Invalid regular expression
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Choose a delimited text file to open
- Нээхээр завдаж буй товч бичгийн файл сонгох
+
Text files
-
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
Regular expression is not valid
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
All files
- Бүх ажил
+
@@ -24415,481 +21779,449 @@ p, li { white-space: pre-wrap; }
Create a Layer from a Delimited Text File
- Товч Бичгийн Файлаас Давхарга Үүсгэх
+
File Name
- Файлын нэр
+
Full path to the delimited text file
- Товч бичгийн файлын бүтэн зам
+
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
- Товч бичгийн файлын бүтэн зам. Файл доторхи талбарыг тайлахын тулд файлын нэрийг өгөхөөс өмнө тусгаарлагчийг тодорхойлох ёстой. Оролтын файлыг сонгохын тулд энэ талбарын баруун талын Хайх товчийг ашигла.
+
Layer name
- Давхаргын нэр
+
Name to display in the map legend
- Зургийн тайлбарт үзүүлэх нэр
+
Name displayed in the map legend
- Зургийн тайлбарт үзүүлэх нэр
+
Browse to find the delimited text file to be processed
- Боловсруулах товч бичгийн файлыг хайж олох
+
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
- Товч бичгийн файлын байрлалыг хайхад энэ товчийг ашигла. </i> цонхны <i> дотор хязгаарлагчийг оруулаагүй үед энэ товч идэвхжихгүй. Ямар нэг файл сонгосон л бол товч бичгийн файлын талбарууд X ба Y талбарын зөөх-оруулах цонхонд орно.
+
Browse...
- Зам заах...
-
-
- Regular expression
- Энгийн илэрхийлэл
-
-
- Tab
-
-
- Space
- Хоорондын зай
-
-
- Comma
-
-
- Encoding
-
-
- Select the file encoding
-
-
- X and Y coordinates are expressed in degrees/minutes/seconds
-
-
- DMS coordinates
-
-
- Geometry field
-
-
- Name of the field containing well known text value
-
-
- Geometry type
- Геометр төрөл
-
-
- Detect
-
-
- Point
- Цэг
-
-
- Line
-
-
- Polygon
-
-
- Record options
-
-
- Field options
-
-
- File format
-
-
- Number of header lines to discard
-
-
- The number of lines to discard from the beginning of the file
-
-
- Field names are read from the first record. If not selected then fields are numbered
-
-
- First record has field names
-
-
- CSV (comma separated values)
-
-
- Fields are defined by the specified delimiter, quote, and escape characters
-
-
- Custom delimiters
-
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
+
+ Tab
+
+
+ Space
+
+
+ Comma
+
+
+ Encoding
+
+
+ Select the file encoding
+
+
+ X and Y coordinates are expressed in degrees/minutes/seconds
+
+
+ DMS coordinates
+
+
+ Geometry field
+
+
+ Name of the field containing well known text value
+
+
+ Geometry type
+
+
+ Detect
+
+
+ Point
+
+
+ Line
+
+
+ Polygon
+
+
+ Record options
+
+
+ Field options
+
+
+ File format
+
+
+ Number of header lines to discard
+
+
+ The number of lines to discard from the beginning of the file
+
+
+ Field names are read from the first record. If not selected then fields are numbered
+
+
+ First record has field names
+
+
+ CSV (comma separated values)
+
+
+ Fields are defined by the specified delimiter, quote, and escape characters
+
+
+ Custom delimiters
+
Regular expression delimiter
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use spatial index
-
Use an index to improve performance of subset filters (set in layer properties)
-
Use subset index
-
Watch for changes to the file by other applications while QGIS is running
-
Watch file
-
Geometry definition
-
Geometry is a point defined by X and Y coordinate fields
-
Point coordinates
-
Geometry is read as a well known text string from the selected fields
-
Well known text (WKT)
-
The file contains only attribute information - it will not be displayed on the map
-
No geometry (attribute only table)
-
Trim leading and trailing spaces from fields
-
Trim fields
-
Discard empty fields in each record
-
Discard empty fields
-
Number fields use comma for a decimal separator
-
Decimal separator is comma
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Semicolon
-
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
-
Regular expression used to split each line into fields
-
Layer settings
-
Sample data
-
Colon
-
-
- Delimiter to use when splitting fields in the text file. The delimiter can be more than one character.
- Бичгэн файл доторхи талбарыг хуваахад ашиглах тусгаарлагч. Тусгаарлагч нэг тэмдэгтээс олон байж болно.
-
-
- Delimiter to use when splitting fields in the delimited text file. The delimiter can be 1 or more characters in length.
- Товч бичгийн файл доторхи талбарыг хуваахад ашиглах тусгаарлагч. Тусгаарлагч 1 эсвэл түүнээс олон тэмдэгт байж болно.
-
-
- X Y fields
- X Y талбар
+
<p align="right">X field</p>
- <p align="right">X Feld</p>
+
Name of the field containing x values
- x-ийн утгыг агуулах талбарын нэр
-
-
- Name of the field containing x values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- x-ийн утгыг агуулах талбарын нэр. Жагсаалтаас нэг талбар сонго. Товч бичгийн файлын удиртгал мөрийг задлан жагсаалт гаргана.
+
<p align="right">Y field</p>
- <p align="right">Y Feld</p>
+
Name of the field containing y values
- y-ийн утга агуулах талбарын нэр
-
-
- Name of the field containing y values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- y-ийн утга агуулах талбарын нэр. Жагсаалтаас нэг талбар сонго. Товч бичгийн файлын удиртгал мөрийг задлан жагсаалт гаргана.
-
-
- WKT field
- WKT талбар
-
-
- Sample text
- Загвар бичиг
+
@@ -24912,49 +22244,7 @@ p, li { white-space: pre-wrap; }
Category label
-
-
-
- QgsDiagramDialog
-
- Pie chart
- Бялуу график
-
-
- Bar chart
- Хэрчимт график
-
-
- Proportional SVG symbols
- Тэнцүү SVG таних тэмдэг
-
-
- linearly scaling
- шугаман хэмжилт
-
-
-
- QgsDiagramDialogBase
-
- Dialog
- Харилцах цонх
-
-
- Display diagrams
- Диаграмыг үзүүлэх
-
-
- Diagram type
- Диаграмын төрөл
-
-
- Classification attribute
- Ангилалын үзүүлэлт
-
-
- Classification type
- Ангилалын төрөл
+
@@ -24963,180 +22253,180 @@ p, li { white-space: pre-wrap; }
mm
- мм
+
Map units
- Зургийн нэгж
+
Around Point
-
Over Point
-
Line
-
Horizontal
- Хэвтээ
+
Free
-
On line
-
Above line
-
Below Line
-
Map orientation
-
Pie chart
- Бялуу график
+
Text diagram
-
Histogram
- Гистограм
+
Height
- Өндөр
+
x-height
-
Area
- Талбай
+
Diameter
-
None
-
Top
- Дээд
+
Right
- Баруун
+
Bottom
- Доод
+
Left
- Зүүн
+
Unknown diagram type.
-
The diagram type '%1' is unknown. A default type is selected for you.
-
Bar length: Scale linearly, such as the following value matches the specified size.
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Transparency: %1%
-
Diagrams: No attributes added.
-
Interpolation value
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Background color
- Дэвсгэр өнгө
+
Pen color
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -25144,260 +22434,260 @@ p, li { white-space: pre-wrap; }
Display diagrams
- Диаграмыг үзүүлэх
+
Diagram type
- Диаграмын төрөл
+
Priority:
-
Low
-
High
-
Appearance
-
Background color
- Дэвсгэр өнгө
+
Line color
- Шугамын өнгө
+
Line width
- Шугамын өргөн
+
Font...
- Үсгийн хэв...
+
Bar width
-
Transparency 0%
-
Start Angle
-
Only show diagrams with a size inside the specified range.
-
Hide diagrams with a size outside the specified range.
-
Scale dependent visibility
-
Minimum
- Хамгийн бага
+
Maximum
- Хамгийн их
+
Size
- Хэмжээ
+
Fixed size
-
Size units
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Attribute
-
Edit expression
-
Find maximum value
- ХИ утгыг ол
+
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Scale
- Масштаб
+
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
Increase size of small diagrams
-
Minimum size
-
Position
- Байрлал
+
Placement
-
Line Options
-
Distance
-
Data defined position
-
x
- x
+
y
- y
+
Automated placement settings
-
Options
-
Label placement
-
Bar Orientation
-
Up
- Дээшээ
+
Down
- Доошоо
+
Right
- Баруун
+
Left
- Зүүн
+
Attributes
-
Available attributes
-
Add expression
-
Assigned attributes
-
Drag and drop to reorder
-
Color
- Өнгө
+
@@ -25406,58 +22696,58 @@ Leave empty to automatically apply the maximum value.
Name
- Нэр
+
Size
- Хэмжээ
+
Date
-
Permissions
-
Owner
- Эзэмшигч
+
Group
-
Type
- Төрөл
+
folder
-
file
-
link
-
@@ -25485,119 +22775,56 @@ Leave empty to automatically apply the maximum value.
Angle
Өнцөг
-
- Ellipsoidal
- Эллипсоидын
-
-
-
- QgsDlgPgBufferBase
-
- Buffer features
- Бүс тогтоох объект
-
-
- Buffer distance in map units:
- Зургийн нэгжээр өгсөн бүсийн зай:
-
-
- Table name for the buffered layer:
- Бүст давхаргын хүснэгтийн нэр:
-
-
- Create unique object id
- Объектод давтагдахгүй id өгөх
-
-
- public
- Нийтийн
-
-
- Geometry column:
- Геометрийн багана:
-
-
- Spatial reference ID:
- Орон зайн лавлах ID:
-
-
- Unique field to use as feature id:
- Объектийн id болох давтагдахгүй талбар:
-
-
- Schema:
- Бүдүүвч:
-
-
- Add the buffered layer to the map?
- Бүст давхаргыг зурагт нэмэх үү?
-
-
- <h2>Buffer the features in layer: </h2>
- <h2>Бүс тогтоох объектийн давхарга: </h2>
-
-
- Parameters
- Үзүүлэлт
-
QgsDualView
-
- Attributes changed
- Атрибут өөрчлөгдсөн
-
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
-
- Run action
- Үйлдлийг гүйцэтгэх
+
Run layer action
-
Open form
- Форм нээх
+
Loading features...
-
Abort
-
Attribute table
-
%1 features loaded.
-
@@ -25605,17 +22832,17 @@ Parser error:
...
- ...
+
Expression
-
Column Preview
-
@@ -25623,12 +22850,12 @@ Parser error:
Form
-
Dummy Text
-
@@ -25636,12 +22863,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -25649,57 +22876,57 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
- Нэрлэж хадгалах
+
...
- ...
+
No symbology
-
Feature symbology
-
Symbol layer symbology
-
Select all
-
Unselect all
-
Export features intersecting the current map extent
-
@@ -25708,12 +22935,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -25721,78 +22948,52 @@ Parser error:
Symbol width
-
Symbol height
-
Rotation
- Эргэлт
+
Outline width
- Хүрээний өргөн
+
Fill color
- Дүүргэх өнгө
+
Border color
- Хүрээний өнгө
+
Symbol name
-
Offset
-
Horizontal anchor point
-
Vertical anchor point
-
-
-
- QgsEmbedLayerDialog
-
- Select project file
- Төсөл ажлыг сонгох
-
-
- QGIS project files (*.qgs)
- QGIS төсөл ажлууд (*.qgis)
-
-
-
- QgsEmbedLayerDialogBase
-
- Select layers and groups to embed
- Шигтгэх Давхарга, Бүлэгийг сонгох
-
-
- Project file
- Төсөл ажил
-
-
- ...
- ...
+
@@ -25810,10 +23011,6 @@ Parser error:
QgsEngineConfigDialog
-
- Dialog
- Харилцах цонх
-
Search method
@@ -25827,27 +23024,27 @@ Parser error:
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
FALP (fastest)
-
Number of candidates
-
Полигон
- Show all labels and features for all layers
- (i.e. including colliding objects)
+
Draw text as outlines (recommended)
-
-
- Show candidates (for debugging)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
+
+ Show all labels and features for all layers
+
Automated Placement Engine
-
- (i.e. including colliding objects)
- Show candidates (for debugging)
+
@@ -25905,7 +23102,7 @@ Parser error:
Error
- Алдаа
+
@@ -25913,35 +23110,35 @@ Parser error:
Dialog
- Харилцах цонх
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
Always show details
-
Details >>
-
@@ -25949,138 +23146,130 @@ p, li { white-space: pre-wrap; }
Expression string builder
-
QgsExpressionBuilderWidget
-
- Operators
- Оператор
-
(String Concatenation)
-
Joins two values together into a string
-
Usage
-
'Dia' || Diameter
-
-
- Fields
- Талбар
+
Search
- Хайх
+
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Parser Error
-
Eval Error
-
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
-
Load top 10 unique values
-
Load all unique values
-
@@ -26088,152 +23277,148 @@ p, li { white-space: pre-wrap; }
Form
-
-
- Search
- Хайх
+
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Operators
- Оператор
+
Equal operator
-
=
- =
+
Addition operator
-
+
- +
+
Subtraction operator
-
-
- -
+
Division operator
-
/
- /
+
Multiplication operator
-
*
- *
+
Power operator
-
^
- ^
+
String Concatenation
-
||
- ||
+
Open Bracket
-
(
- (
+
Close Bracket
-
)
- )
-
-
- Expression
-
Output preview is generated <br> using the first feature from the layer.
-
Output preview:
-
+
+ Expression
+
@@ -26241,37 +23426,37 @@ p, li { white-space: pre-wrap; }
Select By Expression
-
Close
- Хаах
+
...
- ...
+
Select
- Сонгох
+
Add to selection
-
Remove from selection
-
Select within selection
-
@@ -26279,22 +23464,22 @@ p, li { white-space: pre-wrap; }
layer
-
map view
-
user defined
-
Extent (current: %1)
-
@@ -26302,37 +23487,37 @@ p, li { white-space: pre-wrap; }
Form
-
West
- Өрнөд
+
East
- Дорнод
+
North
- Хойд
+
South
- Өмнөд
+
Layer extent
-
Map view extent
-
@@ -26348,7 +23533,7 @@ p, li { white-space: pre-wrap; }
Dialog
- Харилцах цонх
+
@@ -26357,28 +23542,28 @@ p, li { white-space: pre-wrap; }
Not available for layer
-
Only update %1 selected features
-
Evaluation error
-
Provider error
-
Could not add the new field to the provider.
-
An error occured while evaluating the calculation string:
%1
-
Please enter a field name
-
The expression is invalid see (more info) for details
-
@@ -26408,17 +23593,7 @@ p, li { white-space: pre-wrap; }
Field calculator
-
-
- Create a new field
-
-
- Update existing field
- Одоогийн талбарыг шинэчлэх
+
Зөвхөн сонгогдсон обьектүүдийг шинэчил
- New field
- Шинэ талбар
+ Create a new field
+
Output field width
Гаргах талбарын өргөн
-
- Fields
- Талбар
-
-
- Values
- Утга
-
-
- Sample
- Жишээ
-
-
- All
- Бүгд
-
-
- Operators
- Оператор
-
Width of complete output. For example 123,456 means 6 as field width.
-
Нарийвчлал
- +
- +
-
-
- *
- *
-
-
- sqrt
- язгуур
-
-
- sin
- sin
-
-
- tan
- tan
-
-
- acos
- acos
-
-
- (
- (
-
-
- -
- -
-
-
- /
- /
-
-
- ^
- ^
-
-
- cos
- cos
-
-
- asin
- asin
-
-
- atan
- atan
-
-
- )
- )
-
-
- to real
- бодит тоо руу
-
-
- to int
- бүхэл тоо руу
-
-
- to string
- текст рүү
-
-
- length
- урт
-
-
- area
- талбай
-
-
- ||
- ||
+ Update existing field
+ Одоогийн талбарыг шинэчлэх
@@ -26560,7 +23641,7 @@ p, li { white-space: pre-wrap; }
Expression dialog
-
@@ -26568,201 +23649,201 @@ p, li { white-space: pre-wrap; }
Label
- Шошго
+
Id
- Id
+
Name
- Нэр
+
Type
- Төрөл
+
Type name
-
Length
- Урт
+
Precision
- Нарийвчлал
+
Comment
- Тайлбар
+
Edit widget
-
Alias
-
Layer
- Давхарга
+
Field
- Талбар
+
Name conflict
-
The attribute could not be inserted. The name already exists in the table.
-
Added attribute
-
Deleted attribute
-
Line edit
-
Unique values
- Үл давтагдах утгууд
+
Unique values editable
-
Classification
- Ангилал
+
Value map
-
Edit range
-
Slider range
-
Dial range
-
File name
- Ажлын нэр
+
Enumeration
-
Immutable
-
Hidden
- Далд
+
Checkbox
-
Text edit
-
Calendar
- Хуанли
+
Value relation
-
UUID generator
-
Photo
-
Web view
-
Color
- Өнгө
+
Editor Widget
-
Select edit form
-
UI file
-
@@ -26770,123 +23851,123 @@ p, li { white-space: pre-wrap; }
Field calculator
-
Click to toggle table editing
-
Toggle editing mode
-
New column
-
Ctrl+N
- Ctrl+N
+
Delete column
-
Fields
- Талбар
+
Ctrl+X
- Ctrl+X
+
Relations
- Холбоосууд
+
...
- ...
+
Edit UI
-
+
- +
+
-
- -
+
>
- >
+
^
- ^
+
v
-
Suppress attribute form pop-up after feature creation
-
Default
- Өгөгдмөл
+
On
-
Off
-
Autogenerate
-
Drag and drop designer
-
Provide ui-file
-
Attribute editor layout:
-
Python Init function
-
@@ -26916,12 +23997,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
...
- ...
+
Select a file
-
@@ -26930,13 +24011,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
- Миллметр
+
Map unit
-
@@ -26954,14 +24035,10 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
QgsFormAnnotationDialogBase
-
- Dialog
- Харилцах цонх
-
Form annotation
-
Recenter
-
internal GPS
-
GPS Device Editor
GPS Төхөөрөмж Засах
-
- This is the name of the device as it will appear in the lists
- Энэ төхөөрөмжийг жагсаалтанд оруулах нэр нь юм
-
-
- Commands
- Удирдамж
-
-
- The command that is used to upload tracks to the device
- Төхөөрөмжинд мөр оруулахад ашиглах удирдамж
-
-
- The command that is used to download tracks from the device
- Төхөөрөмжөөс мөр татан авахад ашиглах удирдамж
-
-
- The command that is used to upload routes to the device
- Төхөөрөмжид чиглэл оруулахад ашиглах удирдамж
-
-
- The command that is used to download routes from the device
- Төхөөрөмжөөс чиглэл татан авахад ашиглах удирдамж
-
Devices
-
Update
Шинэчлэх
+
+ Device name
+
+
+ This is the name of the device as it will appear in the lists
+ Энэ төхөөрөмжийг жагсаалтанд оруулах нэр нь юм
+
+
+ Commands
+ Удирдамж
+
Track download
-
Route upload
-
Waypoint download
-
+
+ The command that is used to download routes from the device
+ Төхөөрөмжөөс чиглэл татан авахад ашиглах удирдамж
Route download
-
Track upload
-
+
+ The command that is used to download tracks from the device
+ Төхөөрөмжөөс мөр татан авахад ашиглах удирдамж
+
+
+ The command that is used to upload routes to the device
+ Төхөөрөмжид чиглэл оруулахад ашиглах удирдамж
The command that is used to download waypoints from the device
Өртөөг төхөөрөмжөөс татан авахад ашиглах удирдамж
+
+ The command that is used to upload tracks to the device
+ Төхөөрөмжинд мөр оруулахад ашиглах удирдамж
+
Waypoint upload
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
-
-
- Device name
-
QgsGPSInformationWidget
-
- Connecting...
- Холбогдож байна...
-
-
- Timed out!
- Хугацаа хэтэгсэн байна!
-
-
- Connected!
- Холбогдсон!
-
-
- Connect
- Холбох
-
/gps
@@ -27169,18 +24227,33 @@ p, li { white-space: pre-wrap; }
No path to the GPS port is specified. Please enter a path then try again.
-
+
+ Connecting...
+ Холбогдож байна...
Connecting to GPS device...
GPS-ийн төхөөрөмжид холбогдож байна...
+
+ Timed out!
+ Хугацаа хэтэгсэн байна!
+
Failed to connect to GPS device.
GPS-ийн төхөөрөмжтэй холбогдож чадсангүй.
+
+ Connected!
+ Холбогдсон!
+
Dis&connect
@@ -27194,7 +24267,7 @@ p, li { white-space: pre-wrap; }
Error opening log file.
-
No fix
-
Differential
-
Non-differential
-
No position
-
Invalid
Хүчингүй
-
- NMEA files
-
-
- Not a vector layer
- Вектор давхарга биш байна
-
-
- The current layer is not a vector layer
- Энэ давхарга вектор давхарга биш байна
-
-
- Layer cannot be added to
- Давхаргыг нэмж болохгүй
-
-
- The data provider for this layer does not support the addition of features.
- Энэ давхаргад өгөгдөл нийлүүлэгч объект нэмэхийг зөвшөрөхгүй.
-
-
- Layer not editable
- Давхаргыг засаж болохгүй
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Вектор давхаргыг засах боломжгүй. 'Toggle Editing' ашиглан засварлах боломжтой болго.
-
Not enough vertices
-
Cannot close a line feature until it has at least two vertices.
-
Cannot close a polygon feature until it has at least three vertices.
-
Feature added
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
Cannot add feature. Unknown WKB type. Choose a different layer and try again.
-
Save GPS log file as
-
+
+ NMEA files
+
QgsGPSInformationWidgetBase
- Form
- Форм
+ GPS Connect
+
+
+ &Add feature
+
+
+ Quick status indicator:
+green = good or 3D fix
+yellow = good 2D fix
+red = no fix or bad fix
+gray = no data
+
+2D/3D depends on this information being available
+
+
+ Add track point
+
+
+ Reset track
+
...
- Connect
- Холбох
+ Position
+
- Latitude
- Өргөрөг
+ Signal
+
- Longitude
- Уртраг
+ Satellite
+
- Elevation
- Өндөр
+ Options
+
- Add vertex
- Оройн цэг нэмэх
+ Debug
+
- Add feature
- Обьект нэмэх
+ &Connect
+
- GPS connection
- GPS холболт
+ latitude of position fix (degrees)
+
+
+ Longitude
+
+
+ longitude of position fix (degrees)
+
+
+ antenna altitude with respect to geoid (mean sea level)
+
+
+ Altitude
+
+
+ Latitude
+
+
+ Time of fix
+
+
+ date/time of position fix (UTC)
+
+
+ speed over ground
+
+
+ Speed
+
+
+ track direction (degrees)
+
+
+ Direction
+
+
+ Horizontal Dilution of Precision
+
+
+ HDOP
+
+
+ Vertical Dilution of Precision
+
+
+ VDOP
+
+
+ Position Dilution of Precision
+
+
+ PDOP
+
+
+ GPS receiver configuration 2D/3D mode: Automatic or Manual
+
+
+ Mode
+
+
+ position fix dimensions: 2D, 3D or No fix
+
+
+ Dimensions
+
+
+ quality of the position fix: Differential, Non-differential or No position
+
+
+ Quality
+
+
+ position fix status: Valid or Invalid
+
+
+ Status
+
+
+ number of satellites used in the position fix
+
+
+ Satellites
+
+
+ H accurancy
+
+
+ V accurancy
+
+
+ Connection
+
Autodetect
-
+
+ Serial device
+
+
+ Refresh serial device list
+
Төхөөрөмж
- ddddd;
- ddddd;
+ 00000;
+
- Connection to gpsd
- gpsd-д холбогдох
+ gpsd
+
- GPS cursor size
- GPS хулганы хэмжээ
+ Internal
+
- Small
- Жижиг
+ Digitizing
+
- Large
- Том
+ Track
+
- GPS digitizing
- GPS Давхарлан зурах
+ Automatically add points
+
+
+ Track width in pixels
+
+
+ width
+ өргөн
+
+
+ Color
+ Өнгө
+
+
+ save layer after every feature added
+
+
+ Automatically save added feature
+
+
+ save GPS data (NMEA sentences) to a file
+
+
+ Log File
+
+
+ browse for log file
+
+
+ Map centering
+
+
+ when leaving
+
+
+ % of map extent
+
always
үргэлж
-
- Track
-
-
- GPS Connect
-
-
- &Add feature
- &Обьект нэмэх
-
-
- Quick status indicator:
-green = good or 3D fix
-yellow = good 2D fix
-red = no fix or bad fix
-gray = no data
-
-2D/3D depends on this information being available
-
-
- Add track point
-
-
- Reset track
-
-
- Position
- Байрлал
-
-
- Signal
-
-
- Satellite
-
-
- Options
-
-
- Debug
-
-
- &Connect
- &Холбох
-
-
- latitude of position fix (degrees)
-
-
- Longitude
-
-
- longitude of position fix (degrees)
-
-
- antenna altitude with respect to geoid (mean sea level)
-
-
- Altitude
-
-
- Latitude
-
-
- Time of fix
-
-
- date/time of position fix (UTC)
-
-
- speed over ground
-
-
- Speed
-
-
- track direction (degrees)
-
-
- Direction
-
-
- Horizontal Dilution of Precision
-
-
- HDOP
-
-
- Vertical Dilution of Precision
-
-
- VDOP
-
-
- Position Dilution of Precision
-
-
- PDOP
-
-
- GPS receiver configuration 2D/3D mode: Automatic or Manual
-
-
- Mode
- Горим
-
-
- position fix dimensions: 2D, 3D or No fix
-
-
- Dimensions
-
-
- quality of the position fix: Differential, Non-differential or No position
-
-
- Quality
-
-
- position fix status: Valid or Invalid
-
-
- Status
- Статус
-
-
- number of satellites used in the position fix
-
-
- Satellites
-
-
- H accurancy
-
-
- V accurancy
-
-
- Connection
-
-
- Serial device
-
-
- Refresh serial device list
-
-
- 00000;
-
-
- gpsd
-
-
- Internal
-
-
- Digitizing
-
-
- Automatically add points
-
-
- Track width in pixels
-
-
- Color
- Өнгө
-
-
- save layer after every feature added
-
-
- Automatically save added feature
-
-
- save GPS data (NMEA sentences) to a file
-
-
- Log File
-
-
- browse for log file
-
-
- Map centering
-
-
- when leaving
-
-
- % of map extent
-
Cursor
-
- width
- өргөн
+ Small
+ Жижиг
+
+
+ Large
+ Том
QgsGPSPlugin
- &Gps Tools
- &Gps Хэрэгсэл
+ &GPS Tools
+
GPX давхарга шинээр үүсгэн зургийн тавцанд гаргах
- &Gps
- &Gps
+ &GPS
+
Шинэ GPX файл хадгалах нэр...
- GPS eXchange file (*.gpx)
- GPS eXchange файл (*.gpx)
+ GPS eXchange file
+
Unable to create a GPX file with the given name. Try again with another name or in another directory.
-
GPX Loader
GPX Ачаалагч
+
+ Unable to read the selected file.
+Please reselect a valid file.
+
Error importing data
Өгөгдөл оруулахын алдаа
+
+ Could not convert data from %1!
+
+
+
+
+ Error converting data
+
Not supported
Дэмжигдэхгүй
+
+ This device does not support downloading of %1.
+
Downloading data...
@@ -27914,6 +24942,11 @@ gray = no data
Error downloading data
Өгөгдөл татан авалтын алдаа
+
+ This device does not support uploading of %1.
+
Uploading data...
@@ -27933,57 +24966,41 @@ gray = no data
Error uploading data
Өгөгдөл гаргалтын алдаа
-
- Could not convert data from %1!
-
-
-
-
- Error converting data
-
-
- Unable to read the selected file.
-Please reselect a valid file.
-
-
- &GPS Tools
-
-
- &GPS
-
-
- GPS eXchange file
- GPS eXchange файл
-
-
- This device does not support downloading of %1.
-
-
- This device does not support uploading of %1.
-
QgsGPSPluginGui
- GPS eXchange format (*.gpx)
- GPS eXchange загвар (*.gpx)
+ Waypoints
+
+
+ Routes
+
+
+ Tracks
+
+
+ Choose a file name to save under
+
+
+ GPS eXchange format
+
Select file and format to import
Импортлох файл, загварыг сонгох
-
- Waypoints
- Өртөө
-
-
- Routes
- Чиглэл
-
-
- Tracks
- Мөр
-
-
- Choose a file name to save under
-
-
- GPS eXchange format
-
Waypoints from a route
-
Waypoints from a track
-
Route from waypoints
-
Track from waypoints
-
+
+ GPS eXchange format (*.gpx)
+ GPS eXchange загвар (*.gpx)
@@ -28062,6 +25051,23 @@ Please reselect a valid file.
Load GPX file
GPX файл ачаалах
+
+ File
+ Ажил
+
+
+ Browse...
+
+
+ Feature types
+
Import other file
Өөр файл импортлох
+
+ File to import
+
+
+ Feature type
+
+
+ Layer name
+
+
+ GPX output file
+
+
+ Save As...
+
+
+ (Note: Selecting correct file type in browser dialog important!)
+
Download from GPS
GPS-ээ татан авах
- Edit devices
- Төхөөрөмж засах
+ GPS device
+
+
+ Edit devices...
+
+
+ Port
+
+
+ Refresh
+
+
+ Output file
+
Upload to GPS
GPS-д гаргах
-
- File
- Ажил
-
-
- Browse...
- Зам заах...
-
-
- Feature types
-
-
- File to import
-
-
- Feature type
-
-
- Layer name
- Давхаргын нэр
-
-
- GPX output file
-
-
- Save As...
-
-
- (Note: Selecting correct file type in browser dialog important!)
-
-
- GPS device
-
-
- Port
- Порт
-
-
- Output file
- Гаралтын ажил
-
Data layer
-
+
+ Edit devices
+ Төхөөрөмж засах
GPX Conversions
-
GPX input file
-
Conversion
- Хөрвүүлэлт
-
-
- Edit devices...
-
-
- Refresh
-
@@ -28224,92 +25213,61 @@ Please reselect a valid file.
Dataset Description
- Багц Өгөгдлийн Тодорхойлолт
+
Band %1
- Суваг %1
-
-
- Dimensions:
- Хэмжээс:
+
X: %1 Y: %2 Bands: %3
-
-
- Origin:
- Эхлэл:
-
-
- Pixel Size:
- Пикселийн хэмжээ:
+
Dimensions
-
Origin
-
Pixel Size
-
Band
- Суваг
+
Format not supported
-
Cannot read data
-
Cannot get GDAL raster band: %1
-
-
- Cubic
- Шоон
-
-
- Mode
- Горим
-
-
- out of extent
- өргөтгөлийн гадна
-
-
- null (no data)
- тэг (өгөгдөл үгүй)
-
-
- Average Magphase
- Дундаж Magphase
-
-
- Average
- Дундаж
+
QgsGenericProjectionSelector
+
+ Define this layer's coordinate reference system:
+ Давхаргын Солбицлын тогтолцоог зааж өгөх:
+
This layer appears to have no projection specification.
@@ -28320,11 +25278,6 @@ Please reselect a valid file.
By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.
Өгөгдмөл байдлаар, энэ давхарга нь төсөл ажлын тусгагийн мэдээллийг авах ба гэхдээ үүнийг солихын тулд доорхоос өөр тусгагийг сонгож өөрчилж болно.
-
- Define this layer's coordinate reference system:
- Давхаргын Солбицлын тогтолцоог зааж өгөх:
-
QgsGenericProjectionSelectorBase
@@ -28339,17 +25292,17 @@ Please reselect a valid file.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -28422,57 +25375,57 @@ Please reselect a valid file.
ANSI A (Letter; 8.5x11 inches)
- ANSI A (Letter; 8.5x11 inches)
+
ANSI B (Tabloid; 11x17 inches)
-
ANSI C (17x22 inches)
-
ANSI D (22x34 inches)
-
ANSI E (34x44 inches)
-
Arch A (9x12 inches)
-
Arch B (12x18 inches)
-
Arch C (18x24 inches)
-
Arch D (24x36 inches)
-
Arch E (36x48 inches)
-
Arch E1 (30x42 inches)
-
@@ -28480,73 +25433,73 @@ Please reselect a valid file.
Configure Georeferencer
- Тохиргоо
+
Point tip
-
Show IDs
-
Show coords
-
+
+ Residual units
+
+
+ Pixels
+
+
+ Use map units if possible
+
PDF report
-
Left margin
-
mm
- мм
+
Right margin
-
Show Georeferencer window docked
-
PDF map
-
Paper size
-
-
- Residual units
-
-
- Pixels
-
-
- Use map units if possible
-
@@ -28561,29 +25514,13 @@ Please reselect a valid file.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html>
+
QgsGeorefPlugin
-
- &About
- &Тухай
-
QgsGeorefPluginGui
+
+ Georeferencer
+ Орон зайн холболт
+
All other files (*)
@@ -28656,6 +25598,12 @@ p, li { white-space: pre-wrap; }
Load GCP points
GCP цэгүүд дуудах
+
+ GCP file
+
No GCP points to save
@@ -28686,7 +25634,12 @@ p, li { white-space: pre-wrap; }
Toolbars
-
+
+ Current transform parametrisation
+
Одоогийн зургийн солбицол
- Current transform parametrisation
- None
+
+
+ Coordinate of image(column/line)
+
Unable to open GCP points file %1
GCP цэгүүдийн %1 ажлыг нээх боломжгүй
-
- Could not write to %1
- %1 рүү бичих боломжгүй
-
Save GCPs
GCP-г хадгалах
-
- Georeferencer
- Орон зайн холболт
-
Save GCP points?
@@ -28747,7 +25695,7 @@ p, li { white-space: pre-wrap; }
Failed to compute GCP transform: Transform is not solvable
-
Алдаа
- Transformation parameters
- Хөрвүүлэлтийн параметр
-
-
- Translation x
-
-
- Translation y
-
-
- Scale x
-
-
- Scale y
-
-
- Rotation [degrees]
-
-
- Residuals
- Could not write to %1
+ %1 рүү бичих боломжгүй
map units
зургийн нэгж
-
- GCP file
-
-
- None
-
-
- Coordinate of image(column/line)
-
pixels
пиксел
+
+ Transformation parameters
+ Хөрвүүлэлтийн параметр
+
+
+ Translation x
+
+
+ Translation y
+
+
+ Scale x
+
+
+ Scale y
+
+
+ Rotation [degrees]
+
Mean error [%1]
Дундаж алдаа [%1]
+
+ Residuals
+
yes
@@ -28837,17 +25774,17 @@ p, li { white-space: pre-wrap; }
Translation (%1, %2)
-
Scale (%1, %2)
-
Rotation: %1
-
%1 requires at least %2 GCPs. Please define more
-
Thin plate spline (TPS)
-
Projective
-
toolBar
-
Pan
- Пан
+
Ctrl+G
-
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
Zoom Next
-
Zoom Last
- Сүүлийнхийг Багтаах
+
Local histogram stretch
-
Full histogram stretch
-
@@ -29173,27 +26110,27 @@ p, li { white-space: pre-wrap; }
Invalid Path: The file is either unreadable or does not exist
-
Invalid URL:
-
Do you want to add the datasource anyway?
-
Open 3D model file
-
Model files
-
@@ -29201,12 +26138,12 @@ p, li { white-space: pre-wrap; }
Globe Settings
- Тохиргоо
+
Elevation
-
TMS
-
URL/File
-
Map
- Зураг
+
Base Layer
-
URL
- URL
+
TextLabel
-
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Cache
- Cache
+
Path
-
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Model
-
3D Model
-
Stereo
-
Stereo Mode
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -29412,32 +26349,32 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Abort
-
Error: %1 on line %2, column %3
-
WFS
-
GML Getfeature network request failed with error: %1
-
Network
- Сүлжээ
+
@@ -29445,262 +26382,224 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
QgsGradientFillSymbolLayerV2Widget
-
- Color
- Өнгө
-
Millimeter
- Миллметр
+
Map unit
-
Color (start)
-
Color (end)
-
Angle
- Өнцөг
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
-
-
- QgsGraduatedSymbolDialog
-
- Equal Interval
- Тэнцүү интервал
-
-
- Empty
- Хоосон
-
-
-
- QgsGraduatedSymbolDialogBase
-
- graduated Symbol
- Тэмдэг
-
-
- Classify
- Ангилах
-
-
- Mode
- Горим
+
QgsGraduatedSymbolRendererV2Model
- Symbol
- Тэмдэг
+
- Value
- Утга
+
- Label
- Шошго
+
QgsGraduatedSymbolRendererV2Widget
-
- Range
- Цараа
-
-
- Label
- Шошго
-
-
- Symbol levels...
-
-
- Error
- Алдаа
-
-
- There are no available color ramps. You can add them in Style Manager.
-
-
- The selected color ramp is not available.
-
-
- Warning
- Анхааруулга
-
-
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
-Press cancel to abort breaks calculation or OK to continue.
-
-
- Renderer creation has failed.
-
Column
-
Symbol
- Тэмдэг
+
Change...
-
Classes
- Ангий
+
Color ramp
-
Mode
- Горим
+
Equal Interval
- Тэнцүү интервал
+
Quantile (Equal Count)
-
-
- Invert
-
-
- Delete
-
-
- Delete all
-
Natural Breaks (Jenks)
-
Standard Deviation
- Стандарт Хазайц
+
Pretty Breaks
-
+
+ Invert
+
Classify
- Ангилах
+
Add class
-
+
+ Delete
+
+
+ Delete all
+
Advanced
- Нэмэлт
+
+
+ Symbol levels...
+
+
+ Error
+
+
+ There are no available color ramps. You can add them in Style Manager.
+
+
+ The selected color ramp is not available.
+
+
+ Warning
+
+
+ Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
+Press cancel to abort breaks calculation or OK to continue.
+
+
+ Renderer creation has failed.
+
@@ -29708,17 +26607,22 @@ Press cancel to abort breaks calculation or OK to continue.
Column
-
Value
- Утга
+
Type
- Төрөл
+
+
+ Layer
+
ERROR
-
OK
- OK
-
-
- Layer
- Давхарга
+
@@ -29758,20 +26657,15 @@ Press cancel to abort breaks calculation or OK to continue.
result
дүн
-
- Update
- Шинэчлэх
-
Update database record
Сангийн бичлэг шинэчлэх
- New
- Шинэ
+ Update
+ Шинэчлэх
GRASS Засвар нүдний тохируулгыг ашиглан шинэ категори нэмэх
- Delete
- Устгах
+ New
+ Шинэ
Delete selected category
Сонгосон категори хасах
+
+ Delete
+ Устгах
+
QgsGrassBrowser
@@ -29830,13 +26729,13 @@ Press cancel to abort breaks calculation or OK to continue.
New name
-
New name for layer "%1"
-
Warning
Анхааруулга
-
- Information
- Мэдээлэл
-
-
- Question
-
-
- Are you sure you want to delete %n selected layer(s)?
- number of layers to delete
-
-
-
-
- Cannot write new region
-
Cannot copy map %1@%2
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot rename map %1
-
+
+ Information
+
Remove the selected layer(s) from canvas before continue.
-
+
+ Question
+
+
+ Are you sure you want to delete %n selected layer(s)?
+ number of layers to delete
+
Cannot delete map %1
-
+
+ Cannot write new region
+
QgsGrassEdit
- New point
- Шинэ цэг
+ Warning
+ Анхааруулга
- New centroid
- Шинэ хүндийн төв
+ You are not owner of the mapset, cannot open the vector for editing.
+
- Delete vertex
- Оргил хасах
+ Cannot open vector for update.
+
Edit tools
Засварын багаж
+
+ New point
+ Шинэ цэг
+
New line
@@ -29930,6 +26841,11 @@ Press cancel to abort breaks calculation or OK to continue.
New boundary
Шинэ хил
+
+ New centroid
+ Шинэ хүндийн төв
+
Move vertex
@@ -29940,6 +26856,11 @@ Press cancel to abort breaks calculation or OK to continue.
Add vertex
Оргил нэмэх
+
+ Delete vertex
+ Оргил хасах
+
Move element
@@ -29965,35 +26886,10 @@ Press cancel to abort breaks calculation or OK to continue.
Close
Хаах
-
- Warning
- Анхааруулга
-
-
- You are not owner of the mapset, cannot open the vector for editing.
-
-
- Cannot open vector for update.
-
Background
-
Dynamic
-
Boundary (1 area)
-
Boundary (2 areas)
-
Centroid (in area)
-
Centroid (outside area)
-
Centroid (duplicate in area)
-
Node (1 line)
-
Node (2 lines)
-
Next not used
-
Manual entry
-
No category
-
Tool not yet implemented.
-
-
- Orphan record was left in attribute table. <br>Delete the record?
-
-
- Cannot delete orphan record:
-
-
- Left: %1
-
-
- -- Middle: %1
-
-
- -- Right: %1
-
Cannot check orphan record: %1
-
+
+ Orphan record was left in attribute table. <br>Delete the record?
+
+
+ Cannot delete orphan record:
+
Cannot describe table for field %1
-
- Left: %1
- Зүүн: %1
+ Left: %1
+
- Middle: %1
- Дунд: %1
+ -- Middle: %1
+
- Right: %1
- Баруун: %1
+ -- Right: %1
+
@@ -30180,6 +27064,12 @@ Press cancel to abort breaks calculation or OK to continue.
Mode
Горим
+
+ Layer
+
Settings
@@ -30195,21 +27085,6 @@ Press cancel to abort breaks calculation or OK to continue.
Symbology
Тэмдэгзүй
-
- Table
- Хүснэгт
-
-
- Add Column
- Багана нэмэх
-
-
- Create / Alter Table
- Хүснэгт Үүсгэх / Өөрчлөх
-
Line width
@@ -30220,42 +27095,51 @@ Press cancel to abort breaks calculation or OK to continue.
Marker size
Тэмдгийн хэмжээ
-
- Layer
- Давхарга
-
Disp
-
Color
- Өнгө
+
Type
- Төрөл
+
Index
- Индекс
+
+
+ Table
+ Хүснэгт
Column
-
Length
- Урт
+
+
+ Add Column
+ Багана нэмэх
+
+
+ Create / Alter Table
+ Хүснэгт Үүсгэх / Өөрчлөх
@@ -30352,14 +27236,6 @@ Press cancel to abort breaks calculation or OK to continue.
Undo last vertex
Сүүлийн оройн цэгийг буцаах
-
- New point
- Шинэ цэг
-
-
- Undo last point
- Сүүлийн цэгийг буцаах
-
Close line
@@ -30409,32 +27285,32 @@ Press cancel to abort breaks calculation or OK to continue.
Cancel
- Хасах
+
Ok
-
<font color='red'>Enter a name!</font>
-
<font color='red'>This is name of the source!</font>
-
<font color='red'>Exists!</font>
-
Overwrite
-
@@ -30492,32 +27368,32 @@ Press cancel to abort breaks calculation or OK to continue.
Addition
- Нэмэх
+
Subtraction
-
Multiplication
-
Division
-
Modulus
-
Exponentiation
-
Inverse tangent of x (result is in degrees)
-
Inverse tangent of y/x (result is in degrees)
-
Current column of moving window (starts with 1)
-
Cosine of x (x is in degrees)
-
Convert x to double-precision floating point
-
Current east-west resolution
-
Exponential function of x
-
x to the power y
-
Convert x to single-precision floating point
-
Decision: 1 if x not zero, 0 otherwise
-
Decision: a if x not zero, 0 otherwise
-
Decision: a if x not zero, b otherwise
-
Decision: a if x > 0, b if x is zero, c if x < 0
-
Convert x to integer [ truncates ]
-
Check if x = NULL
-
Natural log of x
-
Log of x base b
-
Largest value
-
Median value
-
Smallest value
-
Mode value
-
1 if x is zero, 0 otherwise
-
Current north-south resolution
-
NULL value
-
Random value between a and b
-
Round x to nearest integer
-
Current row of moving window (Starts with 1)
-
Sine of x (x is in degrees)
sin(x)
-
Square root of x
sqrt(x)
-
Tangent of x (x is in degrees)
tan(x)
-
Current x-coordinate of moving window
-
Current y-coordinate of moving window
-
Cannot get current region
-
+
+ Cannot check region of map %1
+
+
+ Cannot get region of map %1
+
No GRASS raster maps currently in QGIS
-
Cannot create 'mapcalc' directory in current mapset.
-
New mapcalc
-
Enter new mapcalc name:
-
Enter vector name
-
+
+ The file already exists. Overwrite?
+
Save mapcalc
-
File name empty
-
Cannot open mapcalc file
-
-
- Cannot check region of map %1
-
-
- Cannot get region of map %1
-
-
- The file already exists. Overwrite?
-
The mapcalc schema (%1) not found.
-
Cannot open mapcalc schema (%1)
-
Cannot read mapcalc schema (%1):
-
%1
at line %2 column %3
-
@@ -30853,15 +27729,9 @@ at line %2 column %3
QgsGrassModule
- Run
- Ажиллуулах
-
-
- Stop
- Зогсоох
+ Module: %1
+
Warning
Анхааруулга
-
- Cannot get input region
-
-
- Use Input Region
-
-
- <B>Successfully finished</B>
-
-
- <B>Finished with error</B>
-
-
- <B>Module crashed or killed</B>
-
-
- Please ensure you have the GRASS documentation installed.
-
-
- Module: %1
-
The module file (%1) not found.
-
Cannot open module file (%1)
-
Cannot read module file (%1)
-
%1
at line %2 column %3
-
Module %1 not found
-
Cannot find man page %1
-
+
+ Please ensure you have the GRASS documentation installed.
+
Not available, description not found (%1)
-
Not available, cannot open description (%1)
-
Not available, incorrect description (%1)
-
+
+ Run
+ Ажиллуулах
+
+
+ Cannot get input region
+
Input %1 outside current region!
-
+
+ Use Input Region
+
Output %1 exists! Overwrite?
-
Cannot find module %1
-
Cannot start module: %1
-
+
+ Stop
+ Зогсоох
+
+
+ <B>Successfully finished</B>
+
+
+ <B>Finished with error</B>
+
+
+ <B>Module crashed or killed</B>
+
@@ -31006,25 +27882,25 @@ at line %2 column %3
Manual
Гараар
+
+ TextLabel
+
Run
Ажиллуулах
-
- Close
- Хаах
-
View output
Гаралтыг харах
- TextLabel
- Close
+ Хаах
@@ -31042,7 +27918,7 @@ at line %2 column %3
'layer' attribute in field tag with key= %1 is missing.
-
@@ -31065,6 +27941,11 @@ at line %2 column %3
QgsGrassModuleGdalInput
+
+ OGR/PostGIS/GDAL Input
+
Warning
Анхааруулга
-
- PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
-
Cannot find layeroption %1
-
-
- OGR/PostGIS/GDAL Input
-
Cannot find whereoption %1
-
Password
-
Select a layer
-
+
+ PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
+
%1: no input
-
QgsGrassModuleInput
+
+ Input
+
Warning
Анхааруулга
-
- Use region of this map
-
Cannot find typeoption %1
-
Cannot find values for typeoption %1
-
Cannot find layeroption %1
-
GRASS element %1 not supported
-
+
+ Use region of this map
+
Select a layer
-
%1 (band %2)
-
Cannot get provider
-
%1: no input
-
-
- Input
-
@@ -31177,33 +28053,33 @@ at line %2 column %3
Browse
-
Output file
- Гаралтын ажил
+
GeoTIFF
-
Warning
- Анхааруулга
+
Cannot parse version_min %1
-
Cannot parse version_max %1
-
QgsGrassModuleStandardOptions
-
- Item with key %1 not found
-
-
- << Hide advanced options
-
-
- Show advanced options >>
-
Warning
Анхааруулга
-
- Cannot get current region
-
Cannot find module %1
-
Cannot start module %1
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot read module description (%1):
-
%1
at line %2 column %3
-
Region
-
Input layers
-
Current map canvas
-
Cannot find key %1
-
+
+ << Hide advanced options
+
+
+ Show advanced options >>
+
+
+ Item with key %1 not found
+
Item with id %1 not found
-
+
+ Cannot get current region
+
Cannot check region of map %1
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
-
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
Cannot set region of map %1
-
@@ -31361,52 +28237,57 @@ at line %2 column %3
Өгөгдлийн сан
- Location 2
- Байрлал 2
+ Location 1
+ Байрлал 1
+
+
+ System mapset
+
User's mapset
-
- System mapset
-
-
- Location 1
- Байрлал 1
+ Location 2
+ Байрлал 2
Enter path to GRASS database
-
The directory doesn't exist!
-
+
+ No writable locations, the database is not writable!
+
Enter location name!
-
The location exists!
-
Selected projection is not supported by GRASS!
-
Cannot create projection.
-
Cannot reproject previously set region, default region set.
-
North must be greater than south
-
East must be greater than west
-
+
+ Regions file (%1) not found.
+
+
+ Cannot open locations file (%1)
+
+
+ Cannot read locations file (%1):
+
+
+
+%1
+at line %2 column %3
+
+
+ Cannot create QgsCoordinateReferenceSystem
+
Cannot reproject selected region.
-
Cannot reproject region
-
Enter mapset name.
-
The mapset already exists
-
Mapset:
-
Create location
Байрлал үүсгэх
+
+ Cannot create new location: %1
+
Create mapset
-
+
+ Cannot create new mapset directory
+
Cannot open DEFAULT_WIND
-
New mapset
Шинэ багцзураг
-
- New mapset successfully created and set as current working mapset.
-
-
- Cannot create new mapset directory
-
-
- Cannot create QgsCoordinateReferenceSystem
-
-
- No writable locations, the database is not writable!
-
-
- Regions file (%1) not found.
-
-
- Cannot open locations file (%1)
-
-
- Cannot read locations file (%1):
-
-
-
-%1
-at line %2 column %3
-
-
- Cannot create new location: %1
-
New mapset successfully created, but cannot be opened: %1
-
+
+ New mapset successfully created and set as current working mapset.
+
QgsGrassNewMapsetBase
+
+ New Mapset
+
+
+ GRASS Database
+ GRASS Өгөгдлийн сан
+
+
+ Tree
+
+
+ Comment
+ Тайлбар
+
Example directory tree:
Мөчирлөг хавтсын жишээ:
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
+
Database Error
@@ -31580,11 +28485,21 @@ at line %2 column %3
Database:
Өгөгдлийн сан:
+
+ Browse...
+ Зам заах...
+
Select existing directory or create a new one:
Байгаа хавтсыг сонгох буюу шинийг үүсгэх:
+
+ GRASS Location
+ GRASS Байрлал
+
Location
@@ -31605,6 +28520,21 @@ at line %2 column %3
Location Error
Байрлалын алдаа
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
+
+
+ Projection
+ Проекц
+
Projection Error
@@ -31615,17 +28545,25 @@ at line %2 column %3
Coordinate system
Координатын систем
-
- Projection
- Проекц
-
Not defined
Тодорхойлогдоогүй
+
+ Default GRASS Region
+
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
+
Set current QGIS extent
@@ -31661,6 +28599,12 @@ at line %2 column %3
N
Х
+
+ Mapset
+
New mapset:
@@ -31671,92 +28615,10 @@ at line %2 column %3
Mapset Error
Багцзургийн Алдаа
-
- <p align="center">Existing masets</p>
- <p align="center"> Байгаа багцзураг</p>
-
-
- Location:
- Байрлал:
-
-
- Mapset:
- Багцзураг:
-
-
- New Mapset
-
-
- GRASS Database
- GRASS Өгөгдлийн сан
-
-
- Tree
-
-
- Comment
- Тайлбар
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
-
-
- Browse...
- Зам заах...
-
-
- GRASS Location
- GRASS Байрлал
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
-
-
- Default GRASS Region
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
-
-
- Mapset
- Багцзураг
-
<p align="center">Existing mapsets</p>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
-
Create New Mapset
-
+
+ Location:
+ Байрлал:
+
+
+ Mapset:
+ Багцзураг:
QgsGrassPlugin
- GRASS
- GRASS
+ GrassVector
+
- &GRASS
- &GRASS
+ 0.1
+
+
+ GRASS layer
+
Plugins
-
-
- Open mapset
- Багцзураг нээх
-
-
- New mapset
- Шинэ багцзураг
-
-
- Close mapset
- Багцзураг хаах
-
-
- Add GRASS vector layer
- GRASS вектор давхарга нэмэх
+
Edit Grass Vector layer
GRASS Вектор давхаргыг Засах
+
+ Open Mapset
+
+
+ New Mapset
+
+
+ Close Mapset
+
+
+ Add GRASS Vector Layer
+
Adds a GRASS vector layer to the map canvas
@@ -31865,6 +28727,11 @@ p, li { white-space: pre-wrap; }
Adds a GRASS raster layer to the map canvas
GRASS растер давхаргыг зургийн тавцанд нэмдэг
+
+ Open GRASS Tools
+
Displays the current GRASS region as a rectangle on the map canvas
@@ -31881,19 +28748,38 @@ p, li { white-space: pre-wrap; }
Сонгосон GRASS вектор давхаргыг өөрчлөх.
- GrassVector
- Create New Grass Vector
+
- 0.1
- 0.1
+ &GRASS
+ &GRASS
- GRASS layer
- GRASS давхарга
+ GRASS
+ GRASS
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
-
- GRASS Edit is already running.
-
-
- New vector name
-
-
- New vector created but cannot be opened by data provider.
-
-
- Cannot start editing.
-
-
- GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot open GRASS vector:
%1
-
- Open Mapset
- GRASS Edit is already running.
+
- New Mapset
-
-
- Close Mapset
-
-
- Add GRASS Vector Layer
-
-
- Open GRASS Tools
-
-
- Create New Grass Vector
- New vector name
+
Cannot create new vector: %1
-
+
+ New vector created but cannot be opened by data provider.
+
+
+ Cannot start editing.
+
Cannot open vector for update.
-
+
+ GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
+
Cannot read current region: %1
-
Cannot open the mapset. %1
-
Cannot close mapset. %1
-
Cannot close current mapset. %1
-
Cannot open GRASS mapset. %1
-
@@ -32033,33 +28889,25 @@ p, li { white-space: pre-wrap; }
QgsGrassRasterProvider
-
- Out of extent
- Хүрээнээс хэтэрсэн байна
-
-
- null (no data)
- хоосон (өгөгдөл байхгүй)
-
cellhd file %1 does not exist
-
Groups not yet supported
-
Format not supported
-
Cannot read data
-
@@ -32074,17 +28922,17 @@ p, li { white-space: pre-wrap; }
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
-
- Cannot write region
-
Cannot read current region: %1
-
+
+ Cannot write region
+
@@ -32095,93 +28943,65 @@ p, li { white-space: pre-wrap; }
GRASS Мужийн Тохируулга
- N
- Х
+ Extent
+
- W
- Б
+ North
+
- E
- З
+ West
+
- S
- Ө
+ East
+
- N-S Res
- Х-Ө Res
+ South
+
+
+ Select the extent by dragging on canvas
+or change the following values
+
+
+ Resolution
+
+
+ Cell width
+
+
+ Cell height
+
+
+ Columns
+
Rows
Мөр
-
- Cols
- Багана
-
-
- E-W Res
- З-Б Res
-
-
- Extent
- Өргөтгөл
-
-
- North
- Хойд
-
-
- West
- Өрнөд
-
-
- East
- Дорнод
-
-
- South
- Өмнөд
-
-
- Select the extent by dragging on canvas
-or change the following values
-
-
- Resolution
-
-
- Cell width
-
-
- Cell height
-
-
- Columns
- Багана
-
Border
-
Width
Өргөн
-
- OK
- OK
-
-
- Cancel
- Хасах
-
QgsGrassSelect
Select GRASS Vector Layer
-
Select GRASS Raster Layer
-
Select GRASS mapcalc schema
-
Select GRASS Mapset
-
-
- Warning
- Анхааруулга
+
Choose existing GISDBASE
-
Wrong GISDBASE, no locations available.
-
Wrong GISDBASE
-
Select a map.
-
No map
-
No layer
-
No layers available in this map
-
QgsGrassSelectBase
+
+ Add GRASS Layer
+ GRASS Давхарга Нэмэх
+
Gisdbase
@@ -32276,10 +29089,6 @@ or change the following values
Location
Байрлал
-
- Browse
- Хайх
-
Mapset
@@ -32290,6 +29099,11 @@ or change the following values
Map name
Зургийн нэр
+
+ Select or type map name (wildcards '*' and '?' accepted for rasters)
+ Зургийн нэрийг сонгох буюу бичих ('*' ба '?' тэмдэг растерт зөвшөөрөгдөнө)
+
Layer
@@ -32298,25 +29112,7 @@ or change the following values
Browse...
- Зам заах...
-
-
- OK
- OK
-
-
- Select or type map name (wildcards '*' and '?' accepted for rasters)
- Зургийн нэрийг сонгох буюу бичих ('*' ба '?' тэмдэг растерт зөвшөөрөгдөнө)
-
-
- Add GRASS Layer
- GRASS Давхарга Нэмэх
-
-
- Cancel
- Хасах
+
@@ -32335,13 +29131,13 @@ or change the following values
Warning
- Анхааруулга
+
Cannot rename the lock file %1
-
@@ -32349,12 +29145,48 @@ or change the following values
GRASS Tools
-
+
+ GRASS Tools: %1/%2
+
+
+ GRASS Direct Tools
+
+
+ Modules Tree
+
+
+ Modules List
+
Browser
- Браузер
+
+
+ Direct Modules Tree
+
+
+ Direct Modules List
+
+
+ Cannot start command shell (%1)
+
GRASS Shell is not compiled.
-
-
- GRASS Tools: %1/%2
-
-
- GRASS Direct Tools
-
-
- Modules Tree
-
-
- Modules List
-
-
- Direct Modules Tree
-
-
- Direct Modules List
-
The config file (%1) not found.
-
Cannot open config file (%1).
-
Cannot read config file (%1):
-
%1
at line %2 column %3
-
-
- Cannot start command shell (%1)
-
@@ -32438,7 +29234,7 @@ at line %2 column %3
Modules Tree
-
Modules List
-
Direct Modules Tree
-
Direct Modules List
-
@@ -32473,60 +29269,60 @@ at line %2 column %3
Add feature
- Обьект нэмэх
+
Start editing failed
- Засварын горим эхэлсэнгүй
+
Provider cannot be opened for editing
- Нийлүүлэгч засвар хийхээр нээгдэхгүй
+
Stop editing
-
Do you want to save the changes to layer %1?
-
Error
- Алдаа
+
Problems during roll back
- roll back-ийн явцад асуудал гарав
+
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
-
Show more
-
@@ -32534,68 +29330,65 @@ at line %2 column %3
Browse
- Хайх
+
Layer name
- Давхаргын нэр
+
Type
- Төрөл
+
Provider
-
Datasource
-
none
-
Select file to replace '%1'
-
Please select exactly one file.
-
Select new directory of selected files
-
All files (*)
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -32603,15 +29396,7 @@ at line %2 column %3
Handle bad layers
-
-
- Layer name
- Давхаргын нэр
-
-
- Type
- Төрөл
+
@@ -32619,36 +29404,20 @@ at line %2 column %3
Handle bad layers
-
%1 of %2 bad layers were not fixable.
-
QgsHelpViewer
-
- Error
- Алдаа
-
-
- The QGIS help database is not installed
- QGIS туслах сан суулгаагүй байна
-
-
- Quantum GIS Help
- Quantum GIS Тусламж
-
-
- Quantum GIS Help - %1
- Quantum GIS Тусламж - %1
-
QGIS Help
- QGIS Hilfe
+
@@ -32658,38 +29427,6 @@ at line %2 column %3
QGIS Help
QGIS Hilfe
-
- &Home
- &Home
-
-
- Alt+H
- Alt+H
-
-
- &Forward
- &Vorwärts
-
-
- Alt+F
- Alt+F
-
-
- &Back
- &Rückwärts
-
-
- Alt+B
- Alt+B
-
-
- &Close
- &Хаах
-
-
- Alt+C
- Alt+C
-
about:blank
@@ -32701,17 +29438,17 @@ at line %2 column %3
HTML annotation
-
Delete
-
html
-
@@ -32721,6 +29458,16 @@ at line %2 column %3
WMS Server responded unexpectedly with HTTP Status Code %1 (%2)
WMS Үйлчлэгчийн %1 (%2) HTTP Статус Коод бүхий санамсаргүй хариулт
+
+ Received %1 of %2 bytes
+
+
+ Received %1 bytes (total unknown)
+
HTTP response completed, however there was an error: %1
@@ -32729,62 +29476,49 @@ at line %2 column %3
HTTP transaction completed, however there was an error: %1
-
-
- Received %1 of %2 bytes
-
-
- Received %1 bytes (total unknown)
-
Not connected
-
Looking up '%1'
-
Connecting to '%1'
-
Sending request '%1'
-
Receiving reply
-
Response is complete
-
Closing down connection
-
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
-
+
@@ -32800,25 +29534,6 @@ This may be a problem in your network connection or at the WMS server.
Зайн коеффициент P
-
- QgsIdentifyResults
-
- (Derived)
- (Уламжилсан)
-
-
- Identify Results
- Дүнг Тодорхойлох
-
-
- Feature
- Объект
-
-
- Value
- Утга
-
-
QgsIdentifyResultsBase
@@ -32826,34 +29541,30 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
Үр дүнг Тодорхойлох
-
- Table
- Хүснэгт
-
Layer
- Давхарга
+
FID
- FID
Attribute
- Атрибут
Value
- Утга
+ Утга
Expand tree.
-
...
- ...
-
-
- Collapse tree.
-
-
- New results will be expanded by default.
-
Clear Results
-
-
- Copy selected feature to clipboard.
-
-
- Print selected HTML response.
-
Help
-
Select identify mode
-
Mode
- Горим
+
Select view mode for raster layers
-
View
- Харагдалт
+
Auto open form
-
+
+ Collapse tree.
+
+
+ New results will be expanded by default.
+
+
+ Copy selected feature to clipboard.
+
+
+ Print selected HTML response.
+
@@ -32927,48 +29638,48 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Feature
- Объект
+
Value
- Утга
+
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
(Derived)
- (Уламжилсан)
+
(Actions)
-
Edit feature form
-
View feature form
-
Table
- Хүснэгт
+
Tree
-
Graph
-
feature id
-
Format
- Хэлбэр
+
No attributes.
-
Zoom to feature
-
Copy feature
-
Toggle feature selection
-
Copy attribute value
-
Copy feature attributes
-
Copy GetFeatureInfo request URL
-
Clear results
-
Clear highlights
-
Highlight all
-
Highlight layer
-
Activate layer
-
Layer properties...
-
Expand all
-
Collapse all
-
Attributes changed
- Атрибут өөрчлөгдсөн
+
Cannot print
-
Cannot print this item
-
@@ -33107,7 +29818,7 @@ This may be a problem in your network connection or at the WMS server.
Print
-
@@ -33115,7 +29826,7 @@ This may be a problem in your network connection or at the WMS server.
Loading...
-
@@ -33132,109 +29843,98 @@ This may be a problem in your network connection or at the WMS server.
Triangular interpolation (TIN)
-
Inverse Distance Weighting (IDW)
-
No input data for interpolation
-
Please add one or more input layers
-
Output file name invalid
-
Please enter a valid output file name
-
Break lines
-
Structure lines
-
Points
- Цэг
+
Save interpolated raster as...
-
QgsInterpolationDialogBase
-
- Output
- Гаралт
-
-
- ...
- ...
-
Interpolation plugin
- Интерполяц хэрэгсэл
+
Input
-
Vector layers
-
Interpolation attribute
-
Use z-Coordinate for interpolation
-
Add
- Нэмэх
+
Remove
- Хасах
+
Vector layer
-
Type
- Төрөл
+
+
+ Output
+
Interpolation method
- Интерполяцийн арга
+
+
+ ...
+
Number of columns
-
Number of rows
-
Cellsize X
-
Cellsize Y
-
X min
-
X max
- X ХИ
+
Y min
- Y ХБ
+
Y max
- Y ХИ
+
Set to current extent
-
Output file
-
Add result to project
-
@@ -33323,7 +30034,7 @@ This may be a problem in your network connection or at the WMS server.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -33331,40 +30042,17 @@ This may be a problem in your network connection or at the WMS server.
Form
-
Sub renderer:
-
Merge polygons before rendering (slow)
-
-
-
- QgsItemPositionDialogBase
-
- x
- x
-
-
- y
- y
-
-
- Width
- Өргөн
-
-
- Height
- Өндөр
-
-
- Close
- Хаах
+
@@ -33406,69 +30094,10 @@ This may be a problem in your network connection or at the WMS server.
Шинж чанар
- Preview:
- Тойм:
-
-
- QGIS Rocks!
- QGIS-ийн Хад!
-
-
- Font
- Үсгийн хэв
-
-
- Font size
- Үсгийн хэмжээ
-
-
- %
- %
-
-
- Transparency:
- Нэвтхарагдал:
-
-
- Size:
- Хэмжээ:
-
-
- Above
- Дээд
-
-
- Over
- Дээр
-
-
- Left
- Зүүн
-
-
- Below
- Доор
-
-
- Right
- Баруун
-
-
- Above Right
- Баруун Дээд
+ Placement
+ Байршуулах
Баруун Доод
- Above Left
- Зүүн Дээд
+ Right
+ Баруун
+
+
+ Below
+ Доор
+
+
+ Over
+ Дээр
+
+
+ Above
+ Дээд
+
+
+ Left
+ Зүүн
Зүүн Доод
- Placement
- Байршуулах
+ Above Right
+ Баруун Дээд
- Field containing label
-
-
- Default label
-
-
- Data defined buffer
-
-
- Data defined position
-
-
- Color
- Өнгө
-
-
- Angle (deg)
- Өнцөг (градус)
-
-
- Buffer size
- Буферийн хэмжээ
-
-
- X Offset (pts)
-
-
- Y Offset (pts)
-
-
- Basic label options
-
-
- Buffer labels
-
-
- Label only selected features
-
-
- Data defined placement
-
-
- Data defined properties
-
-
- &Font family
-
-
- &Bold
-
-
- &Italic
-
-
- &Underline
-
-
- &Size
-
-
- Size units
-
-
- Strikeout
-
-
- X Coordinate
- Х Солбицол
-
-
- Y Coordinate
- Y Солбицол
-
-
- Multiline labels?
- Олон мөрт шошго?
+ Above Left
+ Зүүн Дээд
Use scale dependent rendering
- Хэмжээст холбосон хамаарлыг ашиглах
+
Minimum
Хамгийн бага
+
+ Buffer labels
+
+
+ Buffer size
+ Буферийн хэмжээ
+
In map units
Зургийн нэгжээр
+
+ Color
+ Өнгө
+
+
+ %
+ %
+
Transparency
@@ -33650,50 +30202,182 @@ This may be a problem in your network connection or at the WMS server.
Offset
-
X offset
-
Y offset
-
+
+ Basic label options
+
+
+ Field containing label
+
+
+ Default label
+
+
+ Font size
+ Үсгийн хэмжээ
+
+
+ Angle (deg)
+ Өнцөг (градус)
°
°
+
+ Font
+ Үсгийн хэв
+
+
+ Multiline labels?
+ Олон мөрт шошго?
+
+
+ Label only selected features
+
Advanced
Нэмэлт
+
+ Data defined placement
+
+
+ Data defined properties
+
+
+ &Font family
+
+
+ &Bold
+
+
+ &Italic
+
+
+ &Underline
+
+
+ &Size
+
+
+ Size units
+
&Color
&Өнгө
+
+ Strikeout
+
+
+ Data defined buffer
+
+
+ Transparency:
+ Нэвтхарагдал:
+
+
+ Size:
+ Хэмжээ:
+
+
+ Data defined position
+
+
+ X Coordinate
+ Х Солбицол
+
+
+ Y Coordinate
+ Y Солбицол
+
+
+ X Offset (pts)
+
+
+ Y Offset (pts)
+
+
+ Preview:
+ Тойм:
+
+
+ QGIS Rocks!
+ QGIS-ийн Хад!
+
QgsLabelPropertyDialog
- Label font
- Шошгын фонт
+ Expression result
+
Font color
Үсгийн өнгө
-
- Expression result
-
Buffer color
@@ -33705,157 +30389,158 @@ This may be a problem in your network connection or at the WMS server.
Label properties
-
Text
- Текст
+
Font
- Үсгийн хэв
+
+
+ Available typeface styles
+
Size
- Хэмжээ
-
-
- Display
- Дэлгэц
-
-
- Show label
-
-
- Max
-
-
- Min
-
-
- Scale-based
-
-
- Available typeface styles
-
Style
- Загвар
+
Underlined text
-
U
-
Strikeout text
-
S
- Ө
+
Bold text
(data defined only, overrides Style)
-
B
- B
+
Italic text
(data defined only, overrides Style)
-
I
- I
+
+
+ Display
+
+
+ Scale-based
+
+
+ Min
+
+
+ Max
+
+
+ Show label
+
Ignores priority and permits collisions/overlaps
-
Always show (exceptions above)
-
Buffer
- Муж
+
Position
- Байрлал
+
Label distance
-
X Coordinate
- Х Солбицол
+
Y Coordinate
- Y Солбицол
+
Horizontal alignment
-
Vertical alignment
-
Rotation
- Эргэлт
+
QgsLabelingGui
- pt
- pt
+ points
+ цэгүүд
map units
- зургийн нэгж
-
-
- Sample
- Жишээ
-
-
- points
-
mm
- мм
+ мм
% of length
-
%1 not found. Default substituted.
-
Chosen font
-
string
-
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
-
int [0-2000]
-
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
-
int [1-10000]
-
Text/Buffer sample
-
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
No change
-
All uppercase
-
All lowercase
-
Capitalize first letter
-
Size%1
-
X
-
File not found
-
@@ -34031,342 +30707,12 @@ This may be a problem in your network connection or at the WMS server.
Layer labeling settings
-
- Sample text
- Загвар бичиг
-
-
- Reset sample text
-
-
- Size for sample text in map units
-
-
- Sample background color
-
-
- Text
- Текст
-
-
- Formatting
-
-
- Shadow
-
-
- Rendering
- Харгалзуузлах
-
-
- letter
-
-
- Spacing
-
-
- Blend mode
-
-
- word
-
-
- Underlined text
-
-
- Bold text
-(data defined only, overrides Style)
-
-
- B
- B
-
-
- Italic text
-(data defined only, overrides Style)
-
-
- I
- I
-
-
- Font is missing.
-
-
- Text formatting
-
-
- Multiple lines
-
-
- Wrap on character
-
-
- Line height
-
-
- Line height spacing for multi-line text
-
-
- line
-
-
- Alignment
-
-
- Paragraph style alignment of multi-line text
-
-
- Left
- Зүүн
-
-
- Center
-
-
- Right
- Баруун
-
-
- Line direction symbol
-
-
- Text buffer
-
-
- Draw text buffer
-
-
- Pen join style
-
-
- Force point inside polygon
-
-
- Repeat
-
-
- Discourage labels from covering features
-
-
- Available typeface styles
-
-
- U
-
-
- Strikeout text
-
-
- S
- Ө
-
-
- map units
- зургийн нэгж
-
-
- Style
- Загвар
-
-
- Transparency
- Тунгалагжилт
-
-
- %
-
-
- Space in pixels or map units, relative to size unit choice
-
-
- Type case
-
-
- Capitalization style of text
-
-
- mm
- мм
-
-
- Minimum
- Хамгийн бага
-
-
- Maximum
- Хамгийн их
-
-
- Formatted numbers
-
-
- Decimal places
-
-
- Show plus sign
-
-
- Advanced
- Нэмэлт
-
-
- Options
- Хувилбарууд
-
-
- Label every part of multi-part features
-
-
- Merge connected lines to avoid duplicate labels
-
-
- Placement
-
-
- Rotation
- Эргэлт
-
-
- Orientation
- Чиглэл
-
-
- Text style
-
-
- Font
- Үсгийн хэв
+ Label this layer with
+
...
- ...
+
+
+ Lorem Ipsum
+
+
+ Sample text
+
+
+ Reset sample text
+
+
+ Size for sample text in map units
+
+
+ Sample background color
+
+
+ Line direction symbol
+
+
+ Formatted numbers
+
+
+ Decimal places
+
+
+ Show plus sign
+
+
+ Multiple lines
+
+
+ Automated placement settings (apply to all layers)
+
+
+ Text/Buffer Sample
+
+
+ Text
+
+
+ Formatting
+
+
+ Shadow
+
+
+ Rendering
+
+
+ letter
+
+
+ Spacing
+
+
+ Blend mode
+
+
+ word
+
+
+ Underlined text
+
+
+ Bold text
+(data defined only, overrides Style)
+
+
+ B
+
+
+ Italic text
+(data defined only, overrides Style)
+
+
+ I
+
+
+ Font is missing.
+
+
+ Text formatting
+
+
+ Wrap on character
+
+
+ Line height
+
+
+ Line height spacing for multi-line text
+
+
+ line
+
+
+ Alignment
+
+
+ Paragraph style alignment of multi-line text
+
+
+ Left
+
+
+ Center
+
+
+ Right
+
+
+ Force point inside polygon
+
+
+ Repeat
+
+
+ Discourage labels from covering features
+
+
+ Text style
+
+
+ Available typeface styles
+
+
+ U
+
+
+ Strikeout text
+
+
+ S
+
+
+ Style
+
+
+ Transparency
+
+
+ %
+
+
+ Capitalization style of text
+
+
+ Space in pixels or map units, relative to size unit choice
+
+
+ Type case
+
+
+ Font
+
Color
- Өнгө
+
+
+ Size
+
Buffer
- Муж
+
- Size
- Хэмжээ
+ Labels will not show if larger than this on screen
+
+
+ px
+
+
+ Data defined
+
+
+ X
+
+
+ Y
+
+
+ Coordinate
+
+
+ Preserve data rotation values
+
+
+ horizontal
+
+
+ vertical
+
+
+ Label options
+
+
+ Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
+
+
+ Maximum
+ Хамгийн их
+
+
+ Pixel size-based visibility (labels in map units)
+
+
+ Labels will not show if smaller than this on screen
+
+
+ Minimum
+ Хамгийн бага
+
+
+ <
+
+
+ Scale-based visibility
+
+
+ >
+
+
+ Placement
+
+
+ left/right
+
+
+ above
+
+
+ below
+
+
+ Reverse direction
+
+
+ Priority
+
+
+ Low
+
+
+ High
+
+
+ Around point
+
+
+ Offset from point
+
+
+ Parallel
+
+
+ Curved
+
+
+ Text buffer
+
+
+ Draw text buffer
+
+
+ Color buffer's fill
+
+
+ Draw background
+
+
+ Size X
+
+
+ Size type
+
+
+ Size Y
+
+
+ Fill color
+
+
+ Border color
+
+
+ Draw drop shadow
+
+
+ Blur radius
+
+
+ Blur only alpha pixels
+
+
+ Label's rotation is ignored
+
+
+ Use global shadow
+
+
+ ˚
+
+
+ Lowest label component
+
+
+ Draw under
+
+
+ Horizontal
+
+
+ Offset from centroid
+
+
+ Around centroid
+
+
+ Horizontal (slow)
+
+
+ Free (slow)
+
+
+ Using perimeter
+
+
+ visible polygon
+
+
+ whole polygon
+
+
+ Rotation
+
+
+ Above line
+
+
+ On line
+
+
+ Below line
+
+
+ Line orientation dependent position
+
Centroid
-
abc
-
Quadrant
-
Distance
-
- Data defined
- outside
+
- X
- X
+ inside
+
- Y
- Y
+ Maximum angle between curved characters
+
- Coordinate
-
-
- Preserve data rotation values
-
-
- horizontal
-
-
- vertical
-
-
- Label options
-
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
-
- Pixel size-based visibility (labels in map units)
-
-
- Feature options
-
-
- mm
- мм
-
-
- Sample
- Жишээ
-
-
- Lorem Ipsum
-
-
- In points
- Цэгээр
-
-
- In map units
- Зургийн нэгжээр
-
-
- Priority
-
-
- Low
-
-
- High
-
-
- Scale-based visibility
-
-
- Label this layer with
-
-
- Suppress labeling of features smaller than
-
-
- Line orientation dependent position
-
-
- Font family
- Үсгийн хэлбэр
-
-
- Position
- Байрлал
-
-
- Around point
-
-
- Offset from point
-
-
- Parallel
-
-
- Curved
-
-
- Automated placement settings (apply to all layers)
-
-
- Text/Buffer Sample
-
-
- Color buffer's fill
-
-
- Draw background
-
-
- Size X
-
-
- Size type
-
-
- Size Y
-
-
- Fill color
- Дүүргэх өнгө
-
-
- Border color
- Хүрээний өнгө
-
-
- Draw drop shadow
-
-
- Blur radius
-
-
- Blur only alpha pixels
-
-
- Label's rotation is ignored
-
-
- Use global shadow
-
-
- ˚
-
-
- Lowest label component
-
-
- Draw under
-
-
- Horizontal
- Хэвтээ
-
-
- Offset from centroid
-
-
- Around centroid
-
-
- Horizontal (slow)
-
-
- Free (slow)
-
-
- Using perimeter
-
-
- visible polygon
-
-
- whole polygon
-
-
- Above line
-
-
- On line
-
-
- Below line
-
-
- <
- <
-
-
- >
- >
-
-
- left/right
-
-
- above
-
-
- below
-
-
- Reverse direction
-
-
- Labels will not show if larger than this on screen
-
-
- px
-
-
- Labels will not show if smaller than this on screen
- Pen join style
+
Drop shadow
-
Offset
-
-
- %
- %
+
Scale
- Масштаб
+
Background
-
Load symbol parameters
-
Fixed
-
Offset X,Y
-
Rectangle
- Тэгшөнцөгт
+
Square
- Дөрвөлжин
+
Ellipse
-
Circle
-
SVG
-
Shape
- Дүрс
+
Sync with label
-
Offset of label
-
Radius X,Y
-
Border width
- Хүрээний өргөн
+
symbol units
-
- outside
- Merge connected lines to avoid duplicate labels
+
- inside
- Label every part of multi-part features
+
- Maximum angle between curved characters
- Feature options
+
- Above Right
- Баруун Дээд
+ Suppress labeling of features smaller than
+
- Above Left
- Зүүн Дээд
+ mm
+
- Over
- Дээр
-
-
- Above
- Дээд
-
-
- Below Left
- Зүүн Доод
-
-
- Below
- Доор
-
-
- Below Right
- Баруун Доод
-
-
- Show all labels for this layer (including colliding labels)
-
- Show upside-down labels
-
- never
- хэзээч
+
- when rotation defined
-
- always
- үргэлж
+
- Limit number of features to be labeled to
-
- Number of features sent to labeling engine, though not all may be labeled
-
- X Coordinate
- Х Солбицол
+ Position
+
- Y Coordinate
- Y Солбицол
-
-
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
-
- Show label
-
-
- Buffer size
- Буферийн хэмжээ
-
-
- Buffer color
- Буферийн өнгө
+
@@ -35056,21 +31648,21 @@ This may be a problem in your network connection or at the WMS server.
Outline: %1
- Хүрээ: %1
+
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -35078,126 +31670,60 @@ not displayed
&Add Group
-
&Remove
- &Хасах
+
&Show in overview
-
Re&name
- Өөр&нэр
+
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
-
-
- QgsLegend
-
- group
- бүлэг
-
-
- &Properties
- &Мөнчанар
-
-
- &Remove
- &Хасах
-
-
- Legend
- Томъёолсон тэмдэг
-
-
- &Make to toplevel item
- Дээд төвшний объект &Болгох
-
-
- Re&name
- Өөр&нэр
-
-
- &Add group
- бүлэг &Нэмэх
-
-
- &Expand all
- бүгдийг &Өргөжүүлэх
-
-
- &Collapse all
- бүгдийг &Эвдэх
-
-
-
- QgsLegendLayer
-
- &Zoom to layer extent
- Давхаргаар &Багтаах
-
-
- &Remove
- &Хасах
-
-
- &Open attribute table
- Тайлбарын хүснэгт &Нээх
-
-
- Save as...
- Өөрөөр хадгалах...
-
-
- &Properties
- &Мөнчанар
-
-
- Abort
- Таслах
+
QgsLegendModel
- Group
Бүлэг
- No Legend Available
-
@@ -35206,154 +31732,116 @@ not displayed
Millimeter
- Миллметр
+
Map unit
-
Angle
- Өнцөг
+
Distance
-
Line width
- Шугамын өргөн
+
Color
- Өнгө
-
-
-
- QgsLinearlyScalingDialog
-
- Millimeter
- Миллметр
-
-
- Map units
- Зургийн нэгж
-
-
-
- QgsLinearlyScalingDialogBase
-
- Form
- Форм
-
-
- Find maximum value
- ХИ утгыг ол
-
-
- Size
- Хэмжээ
-
-
- Size unit
- Хэмжээний нэгж
+
QgsLoadStyleFromDBDialogLayout
-
- Add column
- Багана Нэмэх
-
Styles related to the layer
-
Other styles on the database
-
Cancel
-
Load Style
-
QgsManageConnectionsDialog
-
- Save
- Хадгалах
-
-
- Save connections
-
-
- XML files (*.xml *.XML)
-
Select all
-
Clear selection
-
Select connections to import
-
Import
- Импорт
+
Export
- Гаргах
+
Export/import error
-
You should select at least one connection from list.
-
+
+ Save connections
+
+
+ XML files (*.xml *.XML)
+
Saving connections
-
Cannot write file %1:
%2.
-
Loading connections
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an WMS connections exchange file.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an PostGIS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Connection with name '%1' already exists. Overwrite?
-
@@ -35454,41 +31942,24 @@ not displayed
Select connections to export
Гаргах холболтуудыг сонго
-
- Browse
- Хайх
-
QgsMapCanvas
- canvas
-
- Rendering
- Харгалзуузлах
+
- Canvas refresh: %1 ms
-
-
- Could not draw %1 because:
-%2
- COMMENTED OUT
- %1-ийг зурж болохгүй, учир нь:
-%2
-
-
- Could not draw %1 because:
-%2
- %1-ийг зурж болохгүй, учир нь:
-%2
+
@@ -35509,127 +31980,119 @@ not displayed
Enter X and Y coordinates (DMS (dd mm ss.ss), DD (dd.dd) or projected coordinates (mmmm.mm)) which correspond with the selected point on the image. Alternatively, click the button with icon of a pencil and then click a corresponding point on map canvas of QGIS to fill in coordinates of that point.
-
X / East:
-
Y / North:
-
-
- X:
- X:
-
-
- Y:
- Y:
+
Snap to background layers
-
QgsMapLayer
+
+ Specify CRS for layer %1
+
%1 at line %2 column %3
-
-
- Style not found in database
-
Error: qgis element could not be found in %1
-
-
- The directory containing your dataset needs to be writable!
-
-
- User database could not be opened.
-
-
- The style table could not be created.
-
-
- The style %1 was saved to database
-
-
- The style %1 was updated in the database.
-
-
- The style %1 could not be updated in the database.
-
-
- The style %1 could not be inserted into database.
-
-
- ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
-
- Unable to open file %1
-
-
- Specify CRS for layer %1
-
Loading style file %1 failed because:
%2
-
Could not save symbology because:
%1
-
+
+ The directory containing your dataset needs to be writable!
+
+
+ Style not found in database
+
Created default style file as %1
-
ERROR: Failed to created default style file as %1. Check file permissions and retry.
-
+
+ User database could not be opened.
+
+
+ The style table could not be created.
+
+
+ The style %1 was saved to database
+
+
+ The style %1 was updated in the database.
+
+
+ The style %1 could not be updated in the database.
+
+
+ The style %1 could not be inserted into database.
+
+
+ ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
+
+
+ Unable to open file %1
+
@@ -35638,13 +32101,13 @@ not displayed
Transform error caught: %1
-
CRS
-
@@ -35652,67 +32115,51 @@ not displayed
add feature
-
-
- Not a vector layer
- Вектор давхарга биш байна
-
-
- The current layer is not a vector layer
- Энэ давхарга вектор давхарга биш байна
+
Layer cannot be added to
- Давхаргыг нэмж болохгүй
+
The data provider for this layer does not support the addition of features.
- Энэ давхаргад өгөгдөл нийлүүлэгч объект нэмэхийг зөвшөрөхгүй.
-
-
- Layer not editable
- Давхаргыг засаж болохгүй
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Вектор давхаргыг засах боломжгүй. 'Toggle Editing' ашиглан засварлах боломжтой болго.
+
Wrong editing tool
-
Cannot apply the 'capture point' tool on this vector layer
-
Coordinate transform error
- Солбицлын хөрвүүлэлтийн алдаа
+
Cannot transform the point to the layers coordinate system
- Цэгийг давхаргын солбицолд хөрвүүлэх боломжгүй
+
Cannot apply the 'capture line' tool on this vector layer
-
Cannot apply the 'capture polygon' tool on this vector layer
-
Cannot add feature. Unknown WKB type
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
-
-
- QgsMapToolAddIsland
-
- Layer not editable
- Давхаргыг засаж болохгүй
+
QgsMapToolAddPart
-
- Not a vector layer
- Вектор давхарга биш байна
-
-
- The current layer is not a vector layer
- Энэ давхарга вектор давхарга биш байна
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Вектор давхаргыг засах боломжгүй. 'Toggle Editing' ашиглан засварлах боломжтой болго.
-
No feature selected. Please select a feature with the selection tool or in the attribute table
-
Several features are selected. Please select only one feature to which an part should be added.
-
Part added
-
-
- Coordinate transform error
- Солбицлын хөрвүүлэлтийн алдаа
-
-
- Cannot transform the point to the layers coordinate system
- Цэгийг давхаргын солбицолд хөрвүүлэх боломжгүй
+
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected feature is not multi part.
-
New part's geometry is not valid.
-
New polygon ring not disjoint with existing polygons.
-
Several features are selected. Please select only one feature to which an island should be added.
-
Selected geometry could not be found
-
QgsMapToolAddRing
-
- Not a vector layer
- Вектор давхарга биш байна
-
-
- The current layer is not a vector layer
- Энэ давхарга вектор давхарга биш байна
-
-
- Layer not editable
- Давхаргыг засаж болохгүй
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Вектор давхаргыг засах боломжгүй. 'Toggle Editing' ашиглан засварлах боломжтой болго.
-
Coordinate transform error
- Солбицлын хөрвүүлэлтийн алдаа
+
Cannot transform the point to the layers coordinate system
- Цэгийг давхаргын солбицолд хөрвүүлэх боломжгүй
+
Ring added
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
-
-
- QgsMapToolAddVertex
-
- Added vertex
- Оройн цэг нэмэгдлээ
+
@@ -35913,36 +32310,24 @@ not displayed
Validation started.
-
Validation finished.
-
QgsMapToolChangeLabelProperties
-
- Label properties changed
- Шошгын үзүүлэлт өөрчлөгдлөө
-
Changed properties for label
-
QgsMapToolDeletePart
-
- Delete part
- Хэсгийг устгах
-
-
- This isn't a multipart geometry.
- Энэ олон хэсэгт геометр биш байна.
-
Part of multipart feature deleted
@@ -35959,12 +32344,12 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
Цагираг устлаа
-
- QgsMapToolDeleteVertex
-
- Vertex deleted
- Оройн цэг устлаа
-
-
QgsMapToolEdit
No active vector layer
-
Layer not editable
-
@@ -35998,27 +32376,27 @@ not displayed
No active vector layer
-
To run an action, you must choose a vector layer by clicking on its name in the legend
-
No actions available
-
The active vector layer has no defined actions
-
No features at this position found.
-
@@ -36026,75 +32404,91 @@ not displayed
Coordinate transform error
- Солбицлын хөрвүүлэлтийн алдаа
+
Cannot transform the point to the layers coordinate system
- Цэгийг давхаргын солбицолд хөрвүүлэх боломжгүй
+
Ring added and filled
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
QgsMapToolIdentify
- (clicked coordinate)
- All (%1)
+
- No active layer
- Идэвхжсэн давхарга алга
+ No active layer. To identify features, you must choose an active layer.
+
Identifying on %1...
-
Identifying done.
-
+
+ (clicked coordinate)
+
+
+ feature id
+
+
+ new feature
+
firstX
attributes get sorted; translation for lastX should be lexically larger than this one
-
firstY
-
lastX
attributes get sorted; translation for firstX should be lexically smaller than this one
-
lastY
-
Area
- Талбай
+
Perimeter
-
no data
-
Error
- Алдаа
+
Identify error
-
-
- feature id
-
-
- All (%1)
-
-
- No active layer. To identify features, you must choose an active layer.
-
-
- new feature
-
-
- Raster
- Растер
+
@@ -36179,19 +32549,11 @@ not displayed
No features at this position found.
-
QgsMapToolMoveFeature
-
- Layer not editable
- Давхаргад засвар хийх боломжгүй
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Вектор давхаргыг засах боломжгүй. 'Toggle Editing' ашиглан засварлах боломжтой болго.
-
Feature moved
@@ -36200,33 +32562,18 @@ not displayed
QgsMapToolMoveLabel
-
- Label moved
- Шошго зөөгдлөө
-
Moved label
-
-
-
- QgsMapToolMoveVertex
-
- Vertex moved
- Оройн цэг зөөгдлөө
+
QgsMapToolNodeTool
-
- Node tool
- Зангилаа цэгийн хэрэгсэл
-
could not snap to a segment on the current layer.
-
Offset curve
-
Offset:
-
Geometry error
-
Creating offset geometry failed
-
@@ -36262,32 +32609,16 @@ not displayed
Pinned label
-
Unpinned label
-
QgsMapToolReshape
-
- Not a vector layer
- Вектор давхарга биш байна
-
-
- The current layer is not a vector layer
- Энэ давхарга вектор давхарга биш байна
-
-
- Layer not editable
- Давхаргыг засварлах горимд биш байна
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Вектор давхаргыг засах боломжгүй. 'Toggle Editing' ашиглан засварлах боломжтой болго.
-
Coordinate transform error
@@ -36309,19 +32640,15 @@ not displayed
Features Rotated
-
QgsMapToolRotateLabel
-
- Label rotated
- Шошго эргэгдлээ
-
Rotated label
-
@@ -36334,17 +32661,17 @@ not displayed
No point feature was detected at the clicked position. Please click closer to the feature or enhance the search tolerance under Settings->Options->Digitizing->Serch radius for vertex edits
-
No rotation Attributes
-
The active point layer does not have a rotation attribute
-
Таних тэмдэгийг эргүүлэх
-
- QgsMapToolSelect
-
- No active layer
- Идэвхжсэн давхарга алга
-
-
QgsMapToolShowHideLabels
Hid labels
-
Showed labels
-
@@ -36377,89 +32697,73 @@ not displayed
Geometry simplified
-
Unsupported operation
-
Multipart features are not supported for simplification.
-
This feature cannot be simplified. Check if feature has enough vertices to be simplified.
-
QgsMapToolSplitFeatures
-
- No feature split done
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- Вектор давхаргыг засах боломжгүй. 'Toggle Editing' ашиглан засварлах боломжтой болго.
-
-
- Features split
-
-
- Not a vector layer
- Вектор давхарга биш байна
-
-
- The current layer is not a vector layer
- Энэ давхарга вектор давхарга биш байна
-
-
- Layer not editable
- Давхаргыг засаж болохгүй
-
Coordinate transform error
- Солбицлын хөрвүүлэлтийн алдаа
+
Cannot transform the point to the layers coordinate system
- Цэгийг давхаргын солбицолд хөрвүүлэх боломжгүй
+
+
+ Features split
+
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
- Cut edges detected. Make sure the line splits features into multiple parts.
-
-
- The geometry is invalid. Please repair before trying to split it.
- No feature split done
+
An error occured during splitting.
-
+
+ Cut edges detected. Make sure the line splits features into multiple parts.
+
+
+ The geometry is invalid. Please repair before trying to split it.
+
@@ -36467,60 +32771,53 @@ not displayed
Coordinate transform error
- Солбицлын хөрвүүлэлтийн алдаа
+
Cannot transform the point to the layers coordinate system
- Цэгийг давхаргын солбицолд хөрвүүлэх боломжгүй
+
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Split error
-
-
-
- QgsMapToolVertexEdit
-
- Don't show this message again
- Энэ мэдээг дахин битгий харуул
+
@@ -36528,81 +32825,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
-
-
- QgsMapserverExportBase
-
- Map file
- Зургийн файл
-
-
- Map
- Зураг
-
-
- Name
- Нэр
-
-
- Height
- Өндөр
-
-
- Width
- Өргөн
-
-
- Units
- Нэгж
-
-
- Image type
- Дүрсийн төрөл
-
-
- Header
- Гарчиг
-
-
- Footer
- Хөлчиг
-
-
- Template
- Загвар
-
-
- Name for the map file to be created from the QGIS project file
- Зургийн файлын нэр нь QGIS төслийн файлаас үүснэ
-
-
- If checked, only the layer information will be processed
- Шалгагдвал зөвхөн давхаргын мэдээлэл боловсруулагдана
-
-
- Browse...
- Зам заах...
-
-
- Rendering
- Харгалзуузлах
+
@@ -36612,39 +32850,39 @@ not displayed
Millimeter
- Миллметр
+
Map unit
-
Interval
-
Line offset
-
Placement
-
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -36662,11 +32900,7 @@ not displayed
Segments
- Хэсэг
-
-
- Ellipsoidal
- Эллипсоидын
+
@@ -36679,78 +32913,62 @@ not displayed
The calculations are based on:
-
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
-
- Segments (in meters)
- Хэсэг (метрээр)
-
-
- Segments (in feet)
- Хэсэг (футээр)
-
-
- Segments (in degrees)
- Хэсэг (градусаар)
-
-
- Segments
- Хэсэг
+
@@ -36787,46 +33005,51 @@ not displayed
Date
-
Whole number (smallint - 16bit)
-
Whole number (integer - 32bit)
-
Whole number (integer - 64bit)
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (double)
- Аравтын тоо (double)
+
Text, unlimited length (text)
-
QgsMergeAttributesDialog
+
+ Skip attribute
+
Id
@@ -36838,19 +33061,15 @@ not displayed
Нэгтгэх
- feature %1
- обьект %1
+ Feature %1
+
Minimum
Хамгийн бага
-
- Feature %1
-
Maximum
@@ -36864,27 +33083,22 @@ not displayed
Sum
- Нийт
+
Concatenation
-
Mean
Дундаж
-
- Skip attribute
-
Skipped
-
@@ -36910,26 +33124,23 @@ not displayed
Remaining messages
-
Close all
-
Close
- Хаах
+
%n more
unread messages
-
-
+
@@ -36937,38 +33148,38 @@ not displayed
QGIS Log
-
No messages.
-
%1 message(s) logged.
-
General
- Ерөнхий
+
Timestamp
-
Message
-
Level
-
@@ -36989,46 +33200,46 @@ not displayed
Show non-spatial tables
-
Edit...
- Засах...
+
Delete
-
%1: Not a vector layer!
-
%1: OK!
-
Import to MSSQL database
-
Failed to import some layers!
-
Import was successful.
-
@@ -37036,23 +33247,23 @@ not displayed
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
-
Should the existing connection %1 be overwritten?
-
Test connection
- Холболтыг шалгах
+
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
-
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
-
Connection to %1 was successful
-
@@ -37087,82 +33298,82 @@ not displayed
Create a New MSSQL connection
-
Connection Information
- Холболтын мэдээлэл
+
Name
- Нэр
+
Provider/DSN
-
Host
-
Database
- Өгөгдлийн сан
+
Username
- Хэрэглэгчийн нэр
+
Password
-
Name of the new connection
- Шинэ холболтын нэр
+
Trusted Connection
-
Save Username
- Хэрэглэгчийн нэрийг санах
+
&Test Connect
- &Холболтыг шалгах
+
Save Password
-
Only look in the geometry_columns metadata table
-
Also list tables with no geometry
-
Use estimated table parameters
-
@@ -37170,72 +33381,72 @@ not displayed
8 Bytes integer
-
4 Bytes integer
-
2 Bytes integer
-
1 Bytes integer
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
- Аравтын тоо (бодит)
+
Decimal number (double)
- Аравтын тоо (double)
+
Text, fixed length (char)
-
Text, limited variable length (varchar)
-
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length (text)
-
Text, unlimited length unicode (ntext)
-
@@ -37243,7 +33454,7 @@ not displayed
New Connection...
-
@@ -37251,12 +33462,12 @@ not displayed
%1 as %2 in %3
-
as geometryless table
-
@@ -37264,128 +33475,128 @@ not displayed
Add MSSQL Table(s)
-
&Add
- &Нэмэх
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
- Бүгд
+
Schema
- Бүдүүвч
+
Table
- Хүснэгт
+
Type
- Төрөл
+
Geometry column
- Геометр багана
+
Primary key column
-
SRID
- SRID
+
Sql
- Sql
+
Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
Confirm Delete
-
Load connections
- Холболтыг ачааллах
+
XML files (*.xml *XML)
- XML ажил (*.xml *XML)
+
Select Table
- Хүснэгт Сонгох
+
You must select a table in order to add a layer.
-
MSSQL Provider
-
Stop
- Зогсоох
+
Connect
- Холбох
+
@@ -37393,7 +33604,7 @@ not displayed
Select...
- Сонгох...
+
@@ -37401,47 +33612,47 @@ not displayed
Schema
- Бүдүүвч
+
Table
- Хүснэгт
+
Type
- Төрөл
+
Geometry column
- Геометр багана
+
SRID
- SRID
+
Primary key column
-
Select at id
-
Sql
- Sql
+
Detecting...
-
Select...
- Сонгох...
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Enter...
-
Point
- Цэг
+
Multipoint
-
Line
-
Multiline
-
Polygon
-
Multipolygon
-
No Geometry
-
Unknown Geometry
-
@@ -37509,42 +33720,42 @@ not displayed
Not set
- Тохируулаагүй
+
No enhancement
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
Red
- Улаан
+
Green
- Ногоон
+
Blue
- Цэнхэр
+
@@ -37552,43 +33763,35 @@ not displayed
Form
-
Contrast
enhancement
-
Min/max
-
Red band
- Улаан
+
Green band
- Ногоон
+
Blue band
- Цэнхэр
-
-
- Min
- ХБ
-
-
- Max
- ХИ
+
@@ -37596,12 +33799,12 @@ enhancement
Network request %1 timed out
-
Network
- Сүлжээ
+
@@ -37609,7 +33812,7 @@ enhancement
Cannot find boundary in multipart content type
-
@@ -37617,42 +33820,42 @@ enhancement
Create a new %1 connection
-
all
-
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
Saving passwords
-
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
QgsNewHttpConnectionBase
- Name
- Нэр
+ Create a new WMS connection
+
+
+ Connection details
+
+
+ DPI-Mode
+
URL
URL
-
- DPI-Mode
-
If the service requires basic authentication, enter a user name and optional password
-
+
+ Password
+
+
+ &User name
+
+
+ Name
+ Нэр
Ignore GetFeatureInfo URI reported in capabilities
-
Ignore GetMap/GetTile URI reported in capabilities
-
Ignore axis orientation (WMS 1.3/WMTS)
-
Invert axis orientation
-
Smooth pixmap transform
-
Referer
-
-
- Create a new WMS connection
-
-
- Connection details
-
-
- &User name
-
-
- Password
- Нэвтрэх үг
+
@@ -37799,7 +34002,7 @@ Extended error information:
Create a New OGR Database connection
-
Type
- Төрөл
-
-
- Save Password
- Нууц үгийг хадгалах
-
-
- &Test Connect
- &Холболтыг шалгах
+
Name
Нэр
+
+ Name of the new connection
+ Шинэ холболтын нэр
+
Host
@@ -37852,9 +34050,14 @@ Extended error information:
Нэвтрэх үг
- Name of the new connection
- Шинэ холболтын нэр
+ Save Password
+ Нууц үгийг хадгалах
+
+
+ &Test Connect
+ &Холболтыг шалгах
@@ -37880,8 +34083,9 @@ Extended error information:
Шинэ SpatiaLite Өгөгдлийн сангийн Сан
- SpatiaLite (*.sqlite *.db )
- SpatiaLite (*.sqlite *.db )
+ SpatiaLite
+
SpatiaLite Database
SpatiaLite Өгөгдлийн сан
-
- Could not create a new database
-
- Шинэ өгөгдлийн сан үүсгэх боломжгүй
-
-
- Unable to activate FOREIGN_KEY constraints
- FOREIGN_KEY идэвхжүүлэх боломжгүй
-
-
- SpatiaLite
-
Unable to open the database
- Өгөгдлийн санг нээх боломжгүй
+
Error
- Алдаа
+
Failed to load SRIDS: %1
- SRIDS-ийг ачааллахад алдаа: %1
+
Failed to create the SpatiaLite table %1. The database returned:
%2
-
Error Creating Geometry Column
-
Failed to create the geometry column. The database returned:
%1
-
Error Creating Spatial Index
-
Failed to create the spatial index. The database returned:
%1
-
Invalid Layer
- Буруу Давхарга
+
%1 is an invalid layer and cannot be loaded.
- %1 алдаатай давхарга тул ачаалагдахгүй.
+
@@ -37984,147 +34174,147 @@ Extended error information:
New Spatialite Layer
-
Database
- Өгөгдлийн сан
+
Create a new Spatialite database
-
...
- ...
+
Layer name
- Давхаргын нэр
+
Name for the new layer
-
Geometry column
- Геометр багана
+
geometry
-
Type
- Төрөл
+
Point
- Цэг
+
Line
- Шугам
+
Polygon
- Олонталт
+
MultiPoint
-
Multiline
-
Multipolygon
-
-
- Specify CRS
-
-
- Remove attribute
-
Spatial Reference Id
-
Specify the coordinate reference system of the layer's geometry.
- Давхаргын геометрийн солбицлын системийн зааж өгнө үү.
+
+
+ Specify CRS
+
Add an integer id field as the primary key for the new layer
-
Create an autoincrementing primary key
-
New attribute
- Шинэ чанар
+
Name
- Нэр
+
An attribute name
-
-
- Attributes list
-
Add attribute to list
-
Add to attributes list
-
+
+ Attributes list
+
Delete selected attribute
-
+
+ Remove attribute
+
@@ -38147,7 +34337,7 @@ Extended error information:
Date
-
Comma Separated Value
-
GML
-
Mapinfo File
-
Save layer as...
- Давхаргыг хадгалах...
-
-
- Save As
- Өөрөөр хадгалах
+
@@ -38185,220 +34371,98 @@ Extended error information:
New Vector Layer
- Шинэ Вектор Давхарга
+
File format
-
Type
- Төрөл
+
Point
- Цэг
+
Line
- Шугам
+
Polygon
- Олонталт
+
New attribute
- Шинэ чанар
+
Name
- Нэр
+
Width
- Өргөн
+
Precision
- Нарийвчлал
-
-
- Remove attribute
-
-
- File encoding
-
Add attribute to list
-
Add to attributes list
-
+
+ Attributes list
+
+
+ Delete selected attribute
+
+
+ Remove attribute
+
Specify the coordinate reference system of the layer's geometry.
- Давхаргын геометрийн солбицлын системийн зааж өгнө үү.
+
Specify CRS
-
- Attributes list
-
-
- Delete selected attribute
-
-
-
- QgsNorthArrowPlugin
-
- Bottom Left
- Зүүн Доод
-
-
- Top Right
- Баруун Дээд
-
-
- Bottom Right
- Баруун Доод
-
-
- Top Left
- Зүүн Дээд
-
-
- &North Arrow
- &Хойтзүг Тэмдэг
-
-
- Creates a north arrow that is displayed on the map canvas
- Зургийн тавцанд гарах хойтзүг тэмдэг үүсгэх
-
-
- &Decorations
- &Чимэглэл
-
-
-
- QgsNorthArrowPluginGui
-
- Pixmap not found
- Пиксзураг олдсонгүй
-
-
-
- QgsNorthArrowPluginGuiBase
-
- North Arrow Plugin
- Хойтзүг Тэмдгийн Өргөтгөл
-
-
- Angle
- Өнцөг
-
-
- Placement
- Байршуулалт
-
-
- Set direction automatically
- Чиглэлийг автоматаар тохируулах
-
-
- Enable North Arrow
- Хойтзүг Тэмдэг Зөвшөөрөх
-
-
- Top Left
- Зүүн Дээд
-
-
- Top Right
- Баруун Дээд
-
-
- Bottom Left
- Зүүн Доод
-
-
- Bottom Right
- Баруун Доод
-
-
- Placement on screen
- Дэлгэц дээрхи байршуулалт
-
-
- Preview of north arrow
- Хойтзүг тэмдэг үзэх
-
-
-
- QgsOGRSublayersDialog
-
- Layer ID
- Давхарга ID
-
-
- Layer name
- Давхаргын нэр
-
-
- Nb of features
- Обьектийн тоо
-
-
- Geometry type
- Геометр төрөл
-
-
-
- QgsOGRSublayersDialogBase
-
- Select layers to load
- Ачааллах давхаргуудыг сонго
-
-
- 1
- 1
-
-
-
- QgsOSMDataProvider
-
- Open Street Map format
- Open Street Map өргөтгөл
+ File encoding
+
@@ -38406,17 +34470,17 @@ Extended error information:
No query has been specified.
-
There is already a pending request for data.
-
Cannot open output file: %1
-
@@ -38424,47 +34488,47 @@ Extended error information:
Download OpenStreetMap data
-
Extent
-
From map canvas
- Зургийн канвасаас
+
From layer
-
Manual
- Гараар
+
Output file
- Гаралтын ажил
+
...
- ...
+
OpenStreetMap files (*.osm)
-
Download error
-
OpenStreetMap download
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -38507,95 +34571,95 @@ Extended error information:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
...
- ...
+
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Polygons (closed ways)
-
Output layer name
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
-
Tag
-
Count
-
SQLite databases (*.db)
-
Unable to open database:
%1
-
OpenStreetMap export
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -38603,66 +34667,66 @@ Extended error information:
OpenStreetMap Import
-
Input XML file (.osm)
-
...
- ...
+
Output SpatiaLite DB file
-
Create connection (SpatiaLite) after import
-
Connection name
-
OpenStreetMap files (*.osm)
-
SQLite databases (*.db)
-
OpenStreetMap import
-
Output database file exists already. Overwrite?
-
Failed to import OSM data:
%1
-
Import has been successful.
-
@@ -38670,12 +34734,12 @@ Extended error information:
WMS Password for %1
- %1-ийн WMS Нэвтрэх үг
+
Password
-
@@ -38683,12 +34747,12 @@ Extended error information:
Edit...
- Засах...
+
Delete
-
@@ -38696,7 +34760,7 @@ Extended error information:
New Connection...
-
@@ -38704,97 +34768,94 @@ Extended error information:
Add Layer(s) from a %1 Server
-
&Add
- &Нэмэх
+
Add selected layers to map
- Зурагт сонгогдсон давхаргуудыг нэмэх
+
Always cache
-
Prefer cache
-
Prefer network
-
Always network
-
Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
Confirm Delete
-
Load connections
- Холболтыг ачааллах
+
XML files (*.xml *XML)
- XML ажил (*.xml *XML)
+
Coordinate Reference System (%n available)
crs count
-
- Солбицлын Тогтолцоо (%n боломжтой)
-
+
Coordinate Reference System
- Солбицолын Лавлах Систем
+
Could not understand the response:
%1
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
@@ -38802,144 +34863,140 @@ Extended error information:
Add Layer(s) from a Server
- Ёерверээс дэвхарга нэмэх
+
Ready
- Бэлэн
+
Layers
-
C&onnect
- Х&олбох
+
&New
- &Шинэ
+
Edit
-
Delete
-
Load connections from file
- Файлаас холболт дуудах
+
Load
- Дуудах
+
Save connections to file
- Холболтыг файл болгон хадгалах
+
Save
- Хадгалах
+
Adds a few example WMS servers
- WMS серверийн жишээ нэсэх
+
Add default servers
-
ID
- ID
+
Name
- Нэр
+
Title
- Гарчиг
+
Abstract
-
Time
-
-
- Coordinate Reference System
- Солбицолын Лавлах Систем
+
Coordinate Reference System:
-
Selected Coordinate Reference System
-
Change ...
- Өөрчлөх ...
+
Format
- Хэлбэр
+
Options
-
Layer name
- Давхаргын нэр
+
Tile size
-
Feature limit for GetFeatureInfo
-
Cache
- Cache
+
Layer Order
- Давхаргын дараалал
+
Move selected layer UP
-
Up
- Дээшээ
+
Move selected layer DOWN
-
Down
- Доошоо
+
Layer
- Давхарга
+
Style
- Загвар
+
Tilesets
-
Styles
-
Size
- Хэмжээ
+
CRS
-
Server Search
-
Search
- Хайх
+
Description
- Тайлбар
+
URL
- URL
+
Add selected row to WMS list
-
@@ -39041,44 +35098,44 @@ Always network: always load from network and do not check if the cache has a val
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
- Шинэ өгөгдлийн сан үүсгэх боломжгүй
+
Unable to activate FOREIGN_KEY constraints
- FOREIGN_KEY идэвхжүүлэх боломжгүй
+
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Offline Editing Plugin
-
Could not open the spatialite logging database
-
@@ -39086,12 +35143,12 @@ Always network: always load from network and do not check if the cache has a val
Convert to offline project
-
Create offline copies of selected layers and save as offline project
-
&Offline Editing
-
Synchronize
-
Synchronize offline project with remote layers
-
Converting to offline project
-
Synchronizing to remote layers
-
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -39162,32 +35219,32 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
-
SpatiaLite DB
-
All files
- Бүх ажил
+
Offline Editing Plugin
-
Converting to offline project.
-
Offline database file '%1' exists. Overwrite?
-
@@ -39195,12 +35252,12 @@ Always network: always load from network and do not check if the cache has a val
Create offline project
-
Offline data
-
Select remote layers
-
Show only editable layers
-
@@ -39244,27 +35301,26 @@ Always network: always load from network and do not check if the cache has a val
Couldn't open file %1.prj
-
OGR
-
Couldn't open file %1.qpj
-
QgsOgrProvider
- Data source is invalid (%1)
- Data source is invalid, no layer found (%1)
+
OGR
-
- Data source is invalid, no layer found (%1)
- Data source is invalid (%1)
+
Date
-
Date & Time
-
OGR[%1] error %2: %3
-
Unknown
-
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
+
+ type %1 for field %2 not found
+
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
+
+ Feature %1 for attribute update not found.
+
+
+ Field %1 of feature %2 doesn't exist.
+
+
+ Type %1 of attribute %2 of feature %3 unknown.
+
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
-
- type %1 for field %2 not found
-
-
- Feature %1 for attribute update not found.
-
-
- Field %1 of feature %2 doesn't exist.
-
-
- Type %1 of attribute %2 of feature %3 unknown.
-
Shapefiles without attribute are considered read-only.
-
QgsOpenRasterDialog
-
- Choose a name of the raster
-
-
- Error
- Алдаа
-
-
- The selected file is not a valid raster file.
- Сонгосон файл растер файл биш байна.
-
-
- Choose a name for the modified raster
-
-
- -modified
- Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
Open raster
- Растер нээх
+
Save raster as:
-
+
+ Choose a name of the raster
+
+
+ Error
+
+
+ The selected file is not a valid raster file.
+
+
+ Choose a name for the modified raster
+
+
+ -modified
+ Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
+
@@ -39490,22 +35547,22 @@ Always network: always load from network and do not check if the cache has a val
Open an OGR Supported Vector Layer
- Нээлттэй OGR-ийн дэмжлэгтэй вектор давхарга
+
Open Directory
-
Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
Confirm Delete
- Хасахаа Баталгаажуулах
+
Add vector layer
-
No database selected.
-
Password for
- Нэвтрэх үг
+
Please enter your password:
- Нэвтрэх үгээ оруулна уу:
+
No protocol URI entered.
-
No layers selected.
-
No directory selected.
-
@@ -39551,12 +35608,12 @@ Always network: always load from network and do not check if the cache has a val
Add vector layer
-
Source type
-
Directory
- Хавтас
+
Database
- Өгөгдлийн сан
+
Protocol
-
Encoding
-
Type
- Төрөл
+
URI
-
Source
- Эх
+
Dataset
-
Browse
- Хайх
+
Connections
-
New
- Шинэ
+
Options Dialog Template
-
GroupBox
-
QgsOptions
-
- Semi transparent circle
-
-
- Cross
-
-
- Detected active locale on your system: %1
-
-
- None / Planimetric
-
Identify highlight color
-
-
- Show all features
-
-
- Show selected features
-
-
- Always
-
-
- If needed
-
-
- Never
-
-
- Load all
-
-
- Check file contents
-
-
- Check extension
-
-
- No
- Үгүй
-
-
- Basic scan
-
-
- Full scan
-
-
- All
- Бүгд
-
-
- Select grid color
-
-
- Solid
- Битүү
-
-
- Dots
- Цэг
-
-
- Crosses
-
-
- Choose project file to open at launch
-
-
- Restore UI defaults
-
-
- Are you sure to reset the UI to default (needs restart)?
-
-
- Overwrite
-
-
- If Undefined
-
-
- Unset
-
-
- Prepend
-
-
- Append
-
-
- Enter scale
-
-
- Scale denominator
-
-
- Load scales
-
-
- XML files (*.xml *.XML)
-
-
- Save scales
-
-
- No Stretch
-
-
- Stretch To MinMax
-
-
- Stretch And Clip To MinMax
-
-
- Clip To MinMax
-
-
- To vertex
-
not present
-
System value: %1
-
- Show features visible on map
- Show all features
+
+
+ Show selected features
+
+
+ Always
+
+
+ If needed
+
+
+ Never
+
+
+ Load all
+
+
+ Check file contents
+
+
+ Check extension
+
+
+ No
+
+
+ Basic scan
+
+
+ Full scan
+
Cumulative pixel count cut
-
Minimum / maximum
-
Mean +/- standard deviation
-
- To segment
- Select grid color
+
- To vertex and segment
- Solid
+
- None
- Үгүй
+ Dots
+
+
+ Crosses
+
+
+ Detected active locale on your system: %1
+
Off
- To vertex
+
- QGIS
- QGIS
+ To segment
+
+
+ To vertex and segment
+
+
+ map units
+
+
+ pixels
+
+
+ Semi transparent circle
+
+
+ Cross
+
+
+ None
+
+
+ QGIS files
+
+
+ Off
+
QGIS
+
+
+ GEOS
-
- Round
-
- Mitre
-
- Bevel
- Налуу
+
- Save default project
-
- You must set a default project
-
- Current project saved as default
-
- Error saving current project as default
-
- Choose a directory to store project template files
-
Selection color
-
- QGIS files
- Show features visible on map
+
- Choose project file to open at launch
+
+
+ Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
+
+
+ Are you sure to reset the UI to default (needs restart)?
+
+
+ Overwrite
+
+
+ If Undefined
+
+
+ Unset
+
+
+ Prepend
+
+
+ Append
+
+
+ Choose a directory
- Хавтас сонгох
+
- map units
- зургийн нэгж
+ Enter scale
+
- pixels
- пиксел
+ Scale denominator
+
- Chain (fast)
- Хэлхээ (хурдан)
+ Load scales
+
+
+ XML files (*.xml *.XML)
+
+
+ Save scales
+
+
+ No Stretch
+
+
+ Stretch To MinMax
+
+
+ Stretch And Clip To MinMax
+
+
+ Clip To MinMax
+
+
+ None / Planimetric
+
QgsOptionsBase
- Hide splash screen at startup
- Эхлэхэд дэлгэц гялсхийхийг болиулах
-
-
- Map display will be updated (drawn) after this many features have been read from the data source
- Энэ олон объектийг эхээс нь уншсаны дараа зургийн дэлгэц шинэчлэгдэнэ (зурсны дагуу)
-
-
- ...
- ...
-
-
- Select Global Default ...
- Дэлхийн Заалтыг Сонгох ...
-
-
- Make lines appear less jagged at the expense of some drawing performance
- Зургийн үзүүлбэрт шугамын мурилзлыг багасгах
-
-
- By default new la&yers added to the map should be displayed
- Өөрөөр заагаагүй бол зурагт нэмсэн шинэ дав&харга дэлгэцэнд гарах ёстой
-
-
- Measure tool
- Хэмжих багаж
-
-
- Fix problems with incorrectly filled polygons
- Олонталтын дүүргэлтээс үүссэн алдааг засах
+ Options
+ Сонголтууд
General
Ерөнхий
- Panning and zooming
- System
+
- Zoom
- Өсгөх
+ Data Sources
+
- Zoom and recenter
- Data sources
+
- Nothing
- Rendering
+
- %
- %
+ Canvas & Legend
+
- Line color
- Шугамын өнгө
+ Canvas and legend
+
- Default snapping tolerance
-
-
- Search radius for vertex edits
- Map Tools
+
Map tools
-
-
- Prompt for &CRS
-
-
- Use &project CRS
-
-
- Use default CRS displa&yed below
-
-
- Locale
- Хэл
-
-
- CRS for new layers
-
-
- When a new layer is created, or when a layer is loaded that has no CRS
-
-
- Default CRS for new projects
-
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
-
- Locale to use instead
- Хэрэглэх Хэл сонгох
-
-
- Additional Info
- Нэмэлт мэдээлэл
-
-
- Detected active locale on your system:
-
-
- Rubberband
-
-
- Line width in pixels
-
-
- Snapping
-
-
- Zoom to mouse cursor
-
-
- Options
- Сонголтууд
+
Давхарлан зурах
- Project files
- GDAL
+
- Warn when opening a project file saved with an older version of QGIS
- CRS
+
- Create new project from default project
- Locale
+ Хэл
- System
- Network
+ Сүлжээ
- Data Sources
- Application
+
- Data sources
-
-
- Canvas & Legend
-
-
- Canvas and legend
-
-
- Map Tools
-
-
- Composer
-
-
- Timeout for timed messages or dialogs
-
-
- s
-
-
- Bold group box titles
-
-
- QGIS-styled group boxes
-
-
- Custom side bar style
-
-
- Use live-updating color chooser dialogs
-
-
- New
- Шинэ
-
-
- Most recent
-
-
- Specific
-
-
- Open project on launch
-
-
- Set current project as default
-
-
- Reset default
-
-
- Template folder
-
-
- Browse
-
-
- Reset
-
-
- Prompt to save project and data source changes when required
-
-
- Enable macros
-
-
- Never
-
-
- Ask
-
-
- For this session only
-
-
- Always (not recommended)
-
-
- Ignore shapefile encoding declaration
-
-
- Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
-
- Add Oracle layers with double click and select in extended mode
-
-
- Selection color
-
-
- Background color
- Дэвсгэр өнгө
+ Style <i>(QGIS restart required)</i>
+
Icon theme
-
Icon size
-
+
+ 16
+
+
+ 24
+
+
+ 32
+
Font
- Үсгийн хэв
+
Qt default
-
- Environment
- Size
+ Хэмжээ
- Apply
- Timeout for timed messages or dialogs
+
- Variable
- s
+
- Value
- Утга
-
-
- Current environment variables (read-only - bold indicates modified at startup)
-
-
- Show only QGIS-specific variables
-
-
- Use custom variables (restart required - include separators)
-
-
- Feature attributes and table
-
-
- Data source handling
-
-
- Prompt for raster sublayers when opening
-
-
- Render layers in parallel using many CPU cores
-
-
- Max cores to use:
-
-
- <b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
-
- Simplification threshold (higher values result in more simplification):
-
-
- Higher values result in more simplification
-
-
- Simplify on provider side if possible
-
-
- Debugging
-
-
- Show these events in the Log Message panel (under Rendering tab)
-
-
- Map canvas refresh
-
-
- Default map appearance (overridden by project properties)
-
-
- Layer legend
-
-
- Double click action in legend
-
-
- Open layer properties
-
-
- Open attribute table
- Атрибут хүснэгтийг нээх
-
-
- Capitalise layer names in legend
- Томъёолсон тэмдэгт давхаргын нэрийг томоор харуулах
+ Hide splash screen at startup
+ Эхлэхэд дэлгэц гялсхийхийг болиулах
QGIS эхлэхэд зөвлөмжийн цонхыг харуулах
- Open attribute table in a dock window (QGIS restart required)
- Bold group box titles
+
- Add PostGIS layers with double click and select in extended mode
- QGIS-styled group boxes
+
- Attribute table behaviour
- Project files
+
+
+ New
+
+
+ Most recent
+
+
+ Specific
+
+
+ ...
+ ...
+
+
+ Open project on launch
+
+
+ Create new project from default project
+
+
+ Set current project as default
+
+
+ Reset default
+
+
+ Template folder
+
+
+ Browse
+
+
+ Reset
+
+
+ Prompt to save project and data source changes when required
+
Prompt for confirmation when a layer is to be removed
-
+
+ Warn when opening a project file saved with an older version of QGIS
+
+
+ Enable macros
+
+
+ Never
+
+
+ Ask
+
+
+ For this session only
+
+
+ Always (not recommended)
+
QSettings
-
Reset the User Interface settings, to reset QGIS to it's default view
-
- Representation for NULL values
- Environment
+
- Map update interval
- Apply
+
- ms
- Variable
+
- Enable feature simplification by default for newly added layers
- Value
+
- Maximum scale at which the layer should be simplified (1:1 always simplifies):
- Remove
+ Хасах
- WMS getLegendGraphic Resolution
- Add
+ Нэмэх
- Highlight color
- Current environment variables (read-only - bold indicates modified at startup)
+
- <html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
- Show only QGIS-specific variables
+
- Buffer
-
-
- Lines / outlines buffer in millimeters.
-
-
- Minimum width
-
-
- Minimum line / outline width in millimeters.
-
-
- Nautical Miles
-
-
- Add predefined scale
-
-
- Remove selected
-
-
- Insert default scales
-
-
- Import from file
- Файлаас оруулах
-
-
- Export to file
- Гаргах
-
-
- Composition defaults
-
-
- Default font
-
-
- Grid appearance
-
-
- Grid style
-
-
- Color...
-
-
- mm
- мм
-
-
- Grid offset
-
-
- x:
-
-
- y:
-
-
- Snap tolerance
-
-
- Feature creation
-
-
- Suppress attribute form pop-up after feature creation
-
-
- Open snapping options in a dock window (QGIS restart required)
-
-
- Curve offset tool
-
-
- Miter limit
-
-
- Join style
- Нэгтгэх хэлбэр
-
-
- Quadrant segments
-
-
- GDAL driver options
-
-
- GDAL drivers
-
-
- Name
- Нэр
-
-
- ext
-
-
- Flags
-
-
- Description
- Тайлбар
-
-
- Edit Pyramids Options
-
-
- Edit Create Options
- Use custom variables (restart required - include separators)
+
Path(s) to search for additional C++ plugins libraries
-
-
- Rendering
- Харгалзуузлах
-
-
- Rendering behavior
-
-
- Default expiration period for WMS-C/WMTS tiles (hours)
-
-
- Style <i>(QGIS restart required)</i>
-
-
- 16
- 16
-
-
- 24
- 24
-
-
- 32
- 32
-
-
- Copy geometry in WKT representation from attribute table
-
-
- Attribute table row cache
-
-
- Scan for valid items in the browser dock
-
-
- Scan for contents of compressed files (.zip) in browser dock
-
-
- GDAL
-
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
-
-
- Use render caching where possible to speed up redraws
-
-
- Rendering quality
-
SVG paths
-
Path(s) to search for Scalable Vector Graphic (SVG) symbols
-
+
+ Feature attributes and table
+
+
+ Open attribute table in a dock window (QGIS restart required)
+
+
+ Copy geometry in WKT representation from attribute table
+
+
+ Attribute table behaviour
+
+
+ Attribute table row cache
+
+
+ Representation for NULL values
+
+
+ Data source handling
+
+
+ Scan for valid items in the browser dock
+
+
+ Scan for contents of compressed files (.zip) in browser dock
+
+
+ Prompt for raster sublayers when opening
+
+
+ Add PostGIS layers with double click and select in extended mode
+
+
+ Rendering behavior
+
+
+ By default new la&yers added to the map should be displayed
+ Өөрөөр заагаагүй бол зурагт нэмсэн шинэ дав&харга дэлгэцэнд гарах ёстой
+
+
+ Use render caching where possible to speed up redraws
+
+
+ Render layers in parallel using many CPU cores
+
+
+ Max cores to use:
+
+
+ Maximum scale at which the layer should be simplified (1:1 always simplifies):
+
+
+ Rendering quality
+
+
+ Make lines appear less jagged at the expense of some drawing performance
+ Зургийн үзүүлбэрт шугамын мурилзлыг багасгах
Rasters
- Растер
+
RGB band selection
-
Red band
- Улаан
+
Green band
- Ногоон
+
Blue band
- Цэнхэр
-
-
- Use standard deviation
- Стандарт хазайлтыг ашиглах
+
Contrast enhancement
-
- Preferred angle units
- Single band gray
+
- Degrees
- Градус
+ Multi band color (byte / band)
+
- Radians
- Радиан
+ Multi band color (> byte / band)
+
- Gon
- Гон
+ Limits (minimum/maximum)
+
- Decimal places
- Аравтын орон
+ Cumulative pixel count cut limits
+
- Keep base unit
- Үндсэн нэгжийг хадгалах
+ -
+
- Zoom factor
- %
+ %
- Mouse wheel action
- Standard deviation multiplier
+
- Overlays
- Давхцал
+ Debugging
+
- Reuse last entered attribute values
- Show these events in the Log Message panel (under Rendering tab)
+
- Validate geometries
- Map canvas refresh
+
- Enable 'on the &fly' reprojection by default
- Default map appearance (overridden by project properties)
+
- Select...
- Сонгох...
+ Selection color
+
- Always start new projects with this CRS
- Highlight color
+
- Network
- Сүлжээ
+ <html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
+
- Exclude URLs (starting with)
- Buffer
+
- Cache settings
- Lines / outlines buffer in millimeters.
+
- Directory
- Хавтас
+ Minimum width
+
- Size
- Хэмжээ
+ Minimum line / outline width in millimeters.
+
- Clear
- Цэвэрлэх
+ Suppress attribute form pop-up after feature creation
+
- WMS search address
- Background color
+ Дэвсгэр өнгө
- Timeout for network requests (ms)
- Use live-updating color chooser dialogs
+
+
+ Ignore shapefile encoding declaration
+
+
+ Disable OGR on-the-fly conversion from declared encoding to UTF-8
+
+
+ Composer
+
+
+ Custom side bar style
+
+
+ Add Oracle layers with double click and select in extended mode
+
+
+ <b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
+
+
+ Simplification threshold (higher values result in more simplification):
+
+
+ Higher values result in more simplification
+
+
+ Simplify on provider side if possible
+
+
+ Layer legend
+
+
+ Double click action in legend
+
+
+ Open layer properties
+
+
+ Open attribute table
+ Атрибут хүснэгтийг нээх
+
+
+ Capitalise layer names
+
+
+ Bold layer names
+
+
+ Display classification attribute names
+
+
+ Bold group names
+
+
+ Create raster icons (may be slow)
+
+
+ Legend item styles
+
+
+ WMS getLegendGraphic Resolution
+
+
+ Identify
+
+
+ <b>Note:</b> Specify the search radius as a percentage of the map width
+
+
+ Search radius for identifying features and displaying map tips
+
+
+ Measure tool
+ Хэмжих багаж
Rubberband color
-
Preferred measurements units
-
Фут
- Identify
- Тодорхойлох
+ Nautical Miles
+
- Application
- Preferred angle units
+
- Single band gray
- Дан суваг-саарал
+ Degrees
+ Градус
- Multi band color (byte / band)
- Map update interval
+
- Multi band color (> byte / band)
- ms
+
- Limits (minimum/maximum)
- Enable feature simplification by default for newly added layers
+
- Cumulative pixel count cut limits
- Radians
+ Радиан
- -
- -
+ Decimal places
+ Аравтын орон
- Standard deviation multiplier
- Keep base unit
+ Үндсэн нэгжийг хадгалах
- Capitalise layer names
- Gon
+
- Bold layer names
- Panning and zooming
+
- Display classification attribute names
- Zoom factor
+
- Bold group names
- Mouse wheel action
+
- Create raster icons (may be slow)
- Zoom
+
- Legend item styles
- Zoom and recenter
+
- <b>Note:</b> Specify the search radius as a percentage of the map width
- Zoom to mouse cursor
+
- Search radius for identifying features and displaying map tips
-
-
- Mode
- Горим
+ Nothing
+
Predefined scales
-
- Add predefined scale
+
+
+ Remove selected
+
+
+ Insert default scales
+
+
+ Import from file
+
+
+ Export to file
+
+
+ Composition defaults
+
+
+ Default font
+
+
+ Grid appearance
+
+
+ Grid style
+
+
+ Color...
+
+
+ Grid defaults
+
+
+ Spacing
+
+
+ mm
+
+
+ Grid offset
+
+
+ x:
+
+
+ y:
+
+
+ Snap tolerance
+
+
+ Guide defaults
+
+
+ Feature creation
+
+
+ Validate geometries
+
+
+ Reuse last entered attribute values
+
+
+ Rubberband
+
+
+ Line color
+ Шугамын өнгө
+
+
+ Line width in pixels
+
+
+ Line width
Шугамын өргөн
- Snapping
+
+
+ Default snap mode
-
- Vertex markers
- Default snapping tolerance
+
- Show markers only for selected features
- Search radius for vertex edits
+
- Marker style
-
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
-
-
- Marker size
- Тэмдгийн хэмжээ
-
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
-
-
- Don't enable 'on the fly' reprojection
-
-
- Default datum transformations
-
-
- Source CRS
-
-
- Destination CRS
-
-
- Source datum transform
-
-
- Destination datum transform
-
-
- Ask for datum transformation when no default is defined
-
-
- Override system locale
-
-
- <b>Note:</b> Enabling / changing overide on local requires an application restart
-
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
-
- Size [KiB]
-
-
- Use proxy for web access
-
-
- Host
- Эх
-
-
- Port
- Порт
-
-
- User
- Хэрэглэгч
-
-
- Leave this blank if no proxy username / password are required
-
-
- Password
- Нэвтрэх үг
-
-
- CRS
-
-
- Proxy type
- Прокси тарал
-
-
- Add
- Нэмэх
-
-
- Remove
- Хасах
-
-
- Position
- Байрлал
-
-
- map units
зургийн нэгж
pixels
пиксел
+
+ Open snapping options in a dock window (QGIS restart required)
+
+
+ Vertex markers
+
+
+ Marker style
+
+
+ Marker size
+
+
+ Show markers only for selected features
+
+
+ Curve offset tool
+
+
+ Miter limit
+
+
+ Join style
+
+
+ Quadrant segments
+
+
+ GDAL driver options
+
+
+ Edit Pyramids Options
+
+
+ Edit Create Options
+
+
+ GDAL drivers
+
+
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+
+
+ Name
+
+
+ ext
+
+
+ Flags
+
+
+ Description
+
+
+ CRS for new layers
+
+
+ Select...
+ Сонгох...
+
+
+ Use &project CRS
+
+
+ Prompt for &CRS
+
+
+ Use default CRS displa&yed below
+
+
+ When a new layer is created, or when a layer is loaded that has no CRS
+
+
+ Default CRS for new projects
+
+
+ Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
+
+
+ Automatically enable 'on the fly' reprojection if layers have different CRS
+
+
+ Always start new projects with this CRS
+
+
+ Enable 'on the &fly' reprojection by default
+
+
+ Don't enable 'on the fly' reprojection
+
+
+ Default datum transformations
+
+
+ Source CRS
+
+
+ Destination CRS
+
+
+ Source datum transform
+
+
+ Destination datum transform
+
+
+ Ask for datum transformation when no default is defined
+
+
+ Override system locale
+
+
+ Locale to use instead
+ Хэрэглэх Хэл сонгох
+
+
+ <b>Note:</b> Enabling / changing overide on local requires an application restart
+
+
+ Additional Info
+ Нэмэлт мэдээлэл
+
+
+ Detected active locale on your system:
+
+
+ WMS search address
+
+
+ Timeout for network requests (ms)
+
+
+ Default expiration period for WMS-C/WMTS tiles (hours)
+
+
+ Max retry in case of tile request errors
+
+
+ User-Agent
+
+
+ Cache settings
+
+
+ Directory
+ Хавтас
+
+
+ Size [KiB]
+
+
+ Clear
+ Цэвэрлэх
+
+
+ Use proxy for web access
+
+
+ Host
+ Эх
+
+
+ Port
+ Порт
+
+
+ User
+ Хэрэглэгч
+
+
+ Leave this blank if no proxy username / password are required
+
+
+ Password
+ Нэвтрэх үг
+
+
+ Proxy type
+
+
+ Exclude URLs (starting with)
+
QgsOptionsDialogBase
Missing objects
-
@@ -41330,17 +37350,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -41348,7 +37368,7 @@ Missing some of the .ui template objects:
Connection to database failed
-
Oracle
-
SQL:%1
error:%2
-
Database connection was successful, but the accessible tables could not be determined.
-
Unable to get list of spatially enabled tables from the database
-
Unsupported geometry type %1 in %2.%3.%4 ignored
-
View %1.%2 doesn't have integer columns for use as keys.
-
Point
- Цэг
+
Multipoint
-
Line
-
Multiline
-
Polygon
-
Multipolygon
-
No Geometry
-
Unknown Geometry
-
@@ -41444,61 +37464,61 @@ error:%2
Edit...
- Засах...
+
Delete
-
Refresh
-
Copying features...
-
Abort
-
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to Oracle database
-
Failed to import some layers!
-
Import was successful.
-
@@ -41508,12 +37528,12 @@ error:%2
Delete layer
-
Layer deleted successfully.
-
@@ -41521,41 +37541,41 @@ error:%2
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
-
Should the existing connection %1 be overwritten?
-
Test connection
- Холболтыг шалгах
+
Connection to %1 was successful
-
Connection failed - Check settings and try again.
-
@@ -41563,128 +37583,128 @@ error:%2
Create a New Oracle connection
-
Connection Information
- Холболтын мэдээлэл
+
Password
-
Save Username
- Хэрэглэгчийн нэрийг санах
+
Username
- Хэрэглэгчийн нэр
+
Name of the new connection
- Шинэ холболтын нэр
+
Database
- Өгөгдлийн сан
+
Name
- Нэр
+
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
Also list tables with no geometry
-
Port
- Порт
+
1521
- 1521
+
&Test Connect
- &Холболтыг шалгах
+
Save Password
-
Host
-
Use estimated table statistics for the layer metadata.
-
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Use estimated table metadata
-
@@ -41692,12 +37712,12 @@ error:%2
%1 as %2 in %3
-
as geometryless table
-
@@ -41718,52 +37738,52 @@ error:%2
Whole number
- Бүхэл тоо
+
Whole big number
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
- Аравтын тоо (бодит)
+
Decimal number (double)
- Аравтын тоо (double)
+
Text, fixed length (char)
-
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
-
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
-
Primary key field %1 not found in %2
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
No key field for query given.
-
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -42207,7 +38227,7 @@ Error: %2
New Connection...
-
@@ -42215,32 +38235,32 @@ Error: %2
Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
Confirm Delete
- Хасахаа Баталгаажуулах
+
Password for %1/<password>@%2
-
Please enter your password:
- Нэвтрэх үгээ оруулна уу:
+
Open failed
-
The connection to %1 failed. Please verify your connection parameters. Make sure you have the GDAL GeoRaster plugin installed.
-
@@ -42248,122 +38268,122 @@ Error: %2
Add Oracle Table(s)
-
&Add
- &Нэмэх
+
&Set Filter
-
Set Filter
-
Wildcard
-
RegExp
-
All
- Бүгд
+
Owner
- Эзэмшигч
+
Table
- Хүснэгт
+
Type
- Төрөл
+
Geometry column
- Геометр багана
+
Primary key column
-
SRID
- SRID
+
Sql
- Sql
+
Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
Confirm Delete
-
Load connections
- Холболтыг ачааллах
+
XML files (*.xml *XML)
- XML ажил (*.xml *XML)
+
Select Table
- Хүснэгт Сонгох
+
You must select a table in order to add a layer.
-
Stop
- Зогсоох
+
Connect
- Холбох
+
@@ -42372,12 +38392,12 @@ Error: %2
Select...
- Сонгох...
+
Enter...
-
@@ -42385,76 +38405,76 @@ Error: %2
Owner
- Эзэмшигч
+
Table
- Хүснэгт
+
Type
- Төрөл
+
Geometry column
- Геометр багана
+
SRID
- SRID
+
Primary key column
-
Select at id
-
Sql
- Sql
+
Specify a geometry type
-
Enter a SRID
-
Select a primary key
-
Select...
- Сонгох...
+
Enter...
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -42462,61 +38482,61 @@ Error: %2
Edit...
- Засах...
+
Delete
-
Refresh
-
Copying features...
-
Abort
-
Import layer
-
%1: Not a vector layer!
-
%1: OK!
-
Import to PostGIS database
-
Failed to import some layers!
-
Import was successful.
-
@@ -42526,12 +38546,12 @@ Error: %2
Delete layer
-
Layer deleted successfully.
-
@@ -42539,7 +38559,7 @@ Error: %2
New Connection...
-
@@ -42547,12 +38567,12 @@ Error: %2
%1 as %2 in %3
-
as geometryless table
-
@@ -42560,34 +38580,27 @@ Error: %2
Form
-
Band
- Суваг
+
Value
- Утга
+
Color
- Өнгө
+
Label
- Шошго
-
-
-
- QgsPasteTransformations
-
- &Add New Transfer
- &Шинэ Шилжүүлэг Нэмэх
+
@@ -42641,7 +38654,7 @@ Error: %2
Miter
-
Solid Line
-
-
- Dash Line
-
-
- Dot Line
-
-
- Dash Dot Line
-
-
- Dash Dot Dot Line
-
No Pen
-
-
-
- QgsPgGeoprocessing
-
- Buffer features in layer %1
- %1 давхаргын мужийн объект
+
- Error connecting to the database
- Өгөгдлийн санд холбогдоход алдаа гарав
+ Dash Line
+
- &Buffer features
- &Мужийн объект
+ Dot Line
+
- &Geoprocessing
- &Геоболовсруулалт
+ Dash Dot Line
+
- Unable to add geometry column
- Геометрийн багана нэмэгдэхгүй
-
-
- Unable to create table
- Хүснэгт үүсээгүй
-
-
- No GEOS support
- GEOS дэмжлэг алга
-
-
- Buffer function requires GEOS support in PostGIS
- Мужийн үйлдэл хийхэд PostGIS дотор GEOS дэмжлэг хэрэгтэй
-
-
- No Active Layer
- Идэвхжсэн Давхарга Алга
-
-
- You must select a layer in the legend to buffer
- Муж тогтоохын тулд давхарга сонгох ёстой
+ Dash Dot Dot Line
+
@@ -42740,7 +38710,7 @@ Error: %2
prefer
-
Saving passwords
-
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Connection failed - Check settings and try again.
-
-
- Connection failed - Check settings and try again.
-
-Extended error information:
-%1
- Холболт амжилтгүй - тохиргоог шалгаад дахин оролдоно уу.
-
-Алдааны дэлгэрэнгүй мэдээлэл:
-%1
+
@@ -42802,7 +38762,7 @@ Extended error information:
Create a New PostGIS connection
-
Name
Нэр
+
+ Service
+
Host
Эх
+
+ Port
+ Порт
+
Database
Өгөгдлийн сан
- Port
- Порт
+ SSL mode
+
Password
Нэвтрэх үг
+
+ Name of the new connection
+
+
+ 5432
+ 5432
+
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
+
+ Only show layers in the layer registries
+
+
+ Restrict the search to the public schema for spatial tables not in the geometry_columns table
+
+
+ When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
+
+
+ Only look in the 'public' schema
+
+
+ Save Username
+ Хэрэглэгчийн нэрийг санах
+
+
+ &Test Connect
+ &Холболтыг шалгах
+
+
+ Save Password
+ Нууц үгийг хадгалах
Use estimated table statistics for the layer metadata.
-
Use estimated table metadata
-
-
- Don't resolve type of unrestricted columns (GEOMETRY)
-
-
- SSL mode
-
-
- Name of the new connection
- Шинэ холболтын нэр
-
-
- 5432
- 5432
-
-
- Save Username
- Хэрэглэгчийн нэрийг санах
-
-
- Save Password
- Нууц үгийг хадгалах
-
-
- &Test Connect
- &Холболтыг шалгах
-
-
- Service
-
-
- Only show layers in the layer registries
-
-
- Restrict the search to the public schema for spatial tables not in the geometry_columns table
-
-
- When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
-
-
- Only look in the 'public' schema
-
Also list tables with no geometry
-
+
+ Don't resolve type of unrestricted columns (GEOMETRY)
+
QgsPgSourceSelect
- &Add
- &Нэмэх
+ Add PostGIS Table(s)
+
- Load connections
- Холболтыг ачааллах
+ &Add
+
+
+ &Set Filter
+
+
+ Set Filter
+
Wildcard
-
-
- Add PostGIS Table(s)
- PostGIS хүснэгт нэмэх
-
-
- &Set Filter
-
-
- Set Filter
-
RegExp
-
All
- Бүгд
+
Schema
- Бүдүүвч
+
Table
- Хүснэгт
+
Type
- Төрөл
+
Geometry column
- Геометр багана
+
Primary key column
-
SRID
- SRID
+
Sql
- Sql
+
Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
Confirm Delete
- Хасахаа Баталгаажуулах
+
+
+ Load connections
+
XML files (*.xml *XML)
- XML ажил (*.xml *XML)
+
Select Table
- Хүснэгт Сонгох
+
You must select a table in order to add a layer.
-
Stop
- Зогсоох
+
Connect
- Холбох
-
-
- Connection failed
- Холболт бүтэлгүйтэв
-
-
-
- QgsPgSourceSelectBase
-
- Add PostGIS Table(s)
- PostGIS хүснэгт нэмэх
-
-
- PostgreSQL Connections
- PostgreSQL Холболт
-
-
- Delete
- Хасах
-
-
- Edit
- Хянах
-
-
- New
- Шинэ
-
-
- Connect
- Холбох
-
-
- Search
- Хайх
+
@@ -43104,12 +39029,12 @@ Extended error information:
Select...
- Сонгох...
+
Enter...
-
@@ -43117,87 +39042,79 @@ Extended error information:
Schema
- Бүдүүвч
+
Table
- Хүснэгт
-
-
- Type
- Төрөл
-
-
- Geometry column
- Геометр багана
-
-
- SRID
- SRID
-
-
- Select at id
-
-
- Sql
- Sql
-
-
- Select...
- Сонгох...
-
-
- Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Column
-
Data Type
-
Spatial Type
-
+
+ SRID
+
Primary Key
-
+
+ Select at id
+
+
+ Sql
+
+
+ Select a primary key
+
+
+ Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
+
+
+ Select...
+
Specify a geometry type
-
Enter a SRID
-
Enter...
-
-
- Select a primary key
-
@@ -43205,32 +39122,32 @@ Extended error information:
Form
-
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- Өргөн
+
Height
- Өндөр
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -43238,474 +39155,208 @@ Extended error information:
Select a picture
-
...
- ...
+
QgsPluginInstaller
-
- Nothing to remove! Plugin directory doesn't exist:
-
-
- QGIS Official Plugin Repository
-
-
- Failed to remove the directory:
-
-
- Check permissions or remove it manually
-
Looking for new plugins...
-
There is a new plugin available
-
There is a plugin update available
-
QGIS Python Plugin Installer
- QGIS Python Хэрэгсэл Суулгагч
+
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
-
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
-
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
- Та хэрэгслийн хувилбарыг буулгахдаа итгэлтэй байна уу? Одоогийнн нь шинэ байна!
+
Plugin installation failed
- Хэрэгсэлийн суулгалт амжилтгүй боллоо
+
Plugin has disappeared
- Хэрэгсэл алга болсон
+
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
-
Plugin installed successfully
- Хэрэгсэл амжилттай суулаа
+
Plugin reinstalled successfully
- Хэрэгсэл дахин амжилттай суулаа
+
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
-
The plugin is broken. Python said:
-
Plugin uninstall failed
-
Are you sure you want to uninstall the following plugin?
-
Warning: this plugin isn't available in any accessible repository!
-
Plugin uninstalled successfully
-
Unable to add another repository with the same URL!
-
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
-
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
-
-
- QgsPluginInstallerDialog
- QGIS Python Plugin Installer
- QGIS Python Хэрэгсэл Суулгагч
+ QGIS Official Plugin Repository
+
- connected
- холбогдсон
+ Nothing to remove! Plugin directory doesn't exist:
+
- unavailable
- боломжгүй
+ Failed to remove the directory:
+
- disabled
- идэвхгүй
-
-
- any status
- дурын статус
-
-
- not installed
- суугаагүй байна
-
-
- installed
- суусан
-
-
- This plugin is not installed
- хэрэгсэл суугаагүй байна
-
-
- This plugin is installed
- хэрэгсэл суулаа
-
-
- This plugin is installed, but there is an updated version available
- хэрэгсэл суулаа, гэхдээ шинэ хувилбар байна
-
-
- This plugin is installed, but I can't find it in any enabled repository
- Хэрэгсэл суусан байна, гэхдээ түүнтэй холбоотой идэвхтэй агуулахыг олсонгүй
-
-
- upgradeable
- сайжруулах боломжтой
-
-
- new!
- шинэ!
-
-
- invalid
- хүчингүй
-
-
- installed version
- суусан хувилбар
-
-
- available version
- боломжит хувилбар
-
-
- That's the newest available version
- Энэ өол хамгийн сүүлд гарсан хувилбар
-
-
- There is no version available for download
- Татаж авах хувилбар байхгүй байна
-
-
- This plugin is broken
- Хэрэгсэл гэмтсэн байна
-
-
- This plugin requires a newer version of Quantum GIS
- Энэ хэрэгсэл нь QGIS-ийн шинэ хувилбар дээр ажиллана
-
-
- at least
- ядаж
-
-
- This plugin requires a missing module
- Энэ хэрэгсэл гээгдсэн модулыг шаардаж байна
-
-
- only locally available
- зөвхөн дотоодод боломжтой
-
-
- - %d plugins available
- - % хэрэгслүүд байна
-
-
- Install plugin
- Хэрэгсэл суулгах
-
-
- Reinstall plugin
- Хэрэгсэл дахин суулгах
-
-
- Upgrade plugin
- Хэрэгслийг шинэчлэх
-
-
- Install/upgrade plugin
- Хэрэгсэл Суулгах/шинэчлэх
-
-
- Downgrade plugin
- Хэрэгслийн хувилбарыг буулгах
-
-
- Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
- Та хэрэгслийн хувилбарыг буулгахдаа итгэлтэй байна уу? Одоогийнн нь шинэ байна!
-
-
- Plugin installation failed
- Хэрэгсэлийн суулгалт амжилтгүй боллоо
-
-
- Plugin has disappeared
- Хэрэгсэл алга болсон
-
-
- Plugin installed successfully
- Хэрэгсэл амжилттай суулаа
-
-
- Plugin reinstalled successfully
- Хэрэгсэл дахин амжилттай суулаа
-
-
-
- QgsPluginInstallerDialogBase
-
- QGIS Python Plugin Installer
- QGIS Python Хэрэгсэл Суулгагч
-
-
- Help
- Тусламж
-
-
- Plugins
- Хэрэгслүүд
-
-
- List of available and installed plugins
- Бэлэн байгаа болон суусэн хэрэгслүүдийн жагсаалт
-
-
- Filter:
- Шүүлт:
-
-
- Display only plugins containing this word in their metadata
- Мета өгөгдөлдөө энэ үгийг агуулсан хэрэгслүүдийг дэлгэцэнд харуул
-
-
- State
- Байдал
-
-
- Status
- Статус
-
-
- Name
- Нэр
-
-
- Version
- Хувилбар
-
-
- Description
- Тайлбар
-
-
- Author
- Зохиогч
-
-
- Repository
- Агуулах
-
-
- Upgrade all
- Бүгдийг шинэчлэх
-
-
- Install, reinstall or upgrade the selected plugin
- Сонгосон хэрэгслүүдийг суулгах, шинэчлэх
-
-
- Install/upgrade plugin
- Хэрэгсэл Суулгах/шинэчлэх
-
-
- URL
- URL
-
-
- Add...
- Нэмэх...
-
-
- Edit...
- Засах...
-
-
- Delete
- Устгах
-
-
- Close the Installer window
- Цонхыг хаах
-
-
- Close
- Хаах
-
-
- Options
- Сонголтууд
-
-
- Configuration of the plugin installer
- Тохиргоо
-
-
- every time QGIS starts
- QGIS-ийг эхлүүлэх болгонд
-
-
- once a day
- өдөрт нэг
-
-
- every 3 days
- гурван өдөр дутамд
-
-
- every week
- 7 хоног бүр
-
-
- every 2 weeks
- хоёр 7 хоног бүр
-
-
- every month
- сар дутамд
-
-
- Allowed plugins
- Зөвшөөрөгдсөн хэрэгслүүд
+ Check permissions or remove it manually
+
QgsPluginInstallerFetchingDialog
Success
-
Resolving host name...
-
Connecting...
- Холбогдож байна...
+
Host connected. Sending request...
-
Downloading data...
- Татан авч буй өгөгдөл...
+
Idle
-
Closing connection...
-
Error
- Алдаа
+
@@ -43740,43 +39391,43 @@ You need to restart QGIS in order to reload it.
QgsPluginInstallerInstallingDialog
Installing...
-
Resolving host name...
-
Connecting...
- Холбогдож байна...
+
Host connected. Sending request...
-
Downloading data...
- Татан авч буй өгөгдөл...
+
Idle
-
Closing connection...
-
Error
- Алдаа
+
Failed to unzip the plugin package. Probably it's broken or missing from the repository. You may also want to make sure that you have write permission to the plugin directory:
-
Aborted by user
-
@@ -43797,21 +39448,6 @@ You need to restart QGIS in order to reload it.
Холбогдож байна...
-
- QgsPluginInstallerOldReposBase
-
- Remove
- Хасах
-
-
- Disable
- Идэвхгүй болгох
-
-
- Ask me later
- Дараа асуу
-
-
QgsPluginInstallerPluginErrorDialog
@@ -43829,12 +39465,12 @@ You need to restart QGIS in order to reload it.
The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below:
-
Do you want to uninstall this plugin now? If you're unsure, probably you would like to do this.
-
@@ -43844,24 +39480,16 @@ You need to restart QGIS in order to reload it.
Repository details
Агуулахын мэдээ
-
- Name:
- Нэр:
-
Enter a name for the repository
Агуулахын нэрийг оруулна уу
-
- URL:
- URL:
-
Name
- Нэр
+
Parameters
-
?qgis=
-
URL
- URL
+
QgsPluginManager
+
+ Plugins
+
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
No Plugins
Өргөтгөл Алга
+
+ No QGIS plugins found in %1
+
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
-
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
-
- This plugin is incompatible with this version of QGIS
-
-
- Plugin designed for QGIS %1
- compatible QGIS version(s)
-
-
- This plugin requires a missing module
- Энэ хэрэгсэл гээгдсэн модулыг шаардаж байна
-
-
- This plugin is broken
- Хэрэгсэл гэмтсэн байна
-
-
- There is a new version available
-
-
- This is a new plugin
-
-
- Installed version of this plugin is higher than any version found in repository
-
-
- This plugin is experimental
-
-
- Category
- Категори
-
-
- Tags
- Тэмдэглэгээ
-
-
- Author
- Зохиогч
-
-
- More info
-
Installable
category: plugins that are available for installation
-
+
+ This plugin is incompatible with this version of QGIS
+
+
+ Plugin designed for QGIS %1
+ compatible QGIS version(s)
+
+
+ This plugin requires a missing module
+
+
+ This plugin is broken
+
+
+ There is a new version available
+
+
+ This is a new plugin
+
+
+ Installed version of this plugin is higher than any version found in repository
+
+
+ This plugin is experimental
+
This plugin is deprecated
-
+
+ Category
+
+
+ Tags
+
+
+ Author
+
+
+ More info
+
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Upgrade plugin
- Хэрэгслийг шинэчлэх
+
Downgrade plugin
- Хэрэгслийн хувилбарыг буулгах
+
Install plugin
- Хэрэгсэл суулгах
+
Reinstall plugin
- Хэрэгсэл дахин суулгах
+
Reload all repositories
-
Only show plugins from selected repository
-
Clear filter
-
connected
- холбогдсон
+
The repository is connected
-
unavailable
- боломжгүй
+
The repository is enabled, but unavailable
-
disabled
- идэвхгүй
+
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
-
- &Select All
- Бүгдийг &Сонгох
-
-
- Plugins
-
-
- No QGIS plugins found in %1
-
-
- Error
- Алдаа
+
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
QgsPluginManagerBase
-
- Directory
- Хавтас
-
Plugin Manager
-
All
- Бүгд
+
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
New
- Шинэ
+
Not installed plugins seen for the first time
-
Invalid
- Хүчингүй
+
Broken and incompatible installed plugins
-
Settings
-
Search
- Хайх
+
Not installed
-
about:blank
- тухай:хоосон
+
Upgrade all upgradeable plugins
-
Upgrade all
- Бүгдийг шинэчлэх
+
Uninstall the selected plugin
-
Uninstall plugin
-
Install, reinstall or upgrade the selected plugin
- Сонгосон хэрэгслүүдийг суулгах, шинэчлэх
+
Reinstall plugin
- Хэрэгсэл дахин суулгах
+
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
Check for updates on startup
-
every time QGIS starts
- QGIS-ийг эхлүүлэх болгонд
+
once a day
- өдөрт нэг
+
every 3 days
- гурван өдөр дутамд
+
every week
- 7 хоног бүр
+
every 2 weeks
- хоёр 7 хоног бүр
+
every month
- сар дутамд
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
-
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Status
- Статус
+
Name
- Нэр
+
URL
- URL
+
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Add a new plugin repository
-
Add...
- Нэмэх...
+
Edit the selected repository
-
Edit...
- Засах...
+
Remove the selected repository
-
Delete
-
@@ -44463,19 +40079,11 @@ p, li { white-space: pre-wrap; }
Label Font
Үсгийн фонт
-
- Circle color
- Дугуйн өнгө
-
-
- Label color
- Өнгө
-
The point displacement renderer only applies to (single) point layers.
'%1' is not a point layer and cannot be displayed by the point displacement renderer
-
@@ -44483,77 +40091,77 @@ p, li { white-space: pre-wrap; }
Form
-
Center symbol:
-
Renderer:
-
Renderer settings...
-
Displacement circles
-
Circle pen width:
-
Circle color:
-
Circle radius modification:
-
Point distance tolerance:
-
Labels
- Шошго
+
Label attribute:
-
Label font...
-
Label color:
-
Use scale dependent labelling
-
max scale denominator:
-
@@ -44564,7 +40172,7 @@ p, li { white-space: pre-wrap; }
Millimeter
- Миллметр
+
Map unit
-
Horizontal distance
- Хэвтээ зай
+
Vertical distance
- Босоо зай
+
Horizontal displacement
- Хэвтээ шилжилт
+
Vertical displacement
- Босоо шилжилт
+
@@ -44600,7 +40208,7 @@ p, li { white-space: pre-wrap; }
Connection to database failed
-
PostGIS
-
error in setting encoding
-
undefined return value from encoding setting
-
Your database has no working PostGIS support.
-
Your PostGIS installation has no GEOS support. Feature selection and identification will not work properly. Please install PostGIS with GEOS support (http://geos.refractions.net)
-
Database connection was successful, but the accessible tables could not be determined.
-
Database connection was successful, but the accessible tables could not be determined. The error message from the database was:
%1
-
Database connection was successful, but the accessible tables could not be determined.
The error message from the database was:
%1
-
Database connection was successful, but no accessible tables were found. Please verify that you have SELECT privilege on a table carrying PostGIS geometry.
-
Unable to get list of spatially enabled tables from the database
-
Retrieval of postgis version failed
-
Could not parse postgis version string '%1'
-
Connection error: %1 returned %2 [%3]
-
Erroneous query: %1 returned %2 [%3]
-
Query failed: %1
Error: no result buffer
-
Query: %1 returned %2 [%3]
-
%1 cursor states lost.
SQL: %2
Result: %3 (%4)
-
resetting bad connection.
-
retry after reset succeeded.
-
retry after reset failed again.
-
connection still bad after reset.
-
bad connection, not retrying.
-
Point
- Цэг
+
+
+ Multipoint
+
Line
-
+
+ Multiline
+
Polygon
-
+
+ Multipolygon
+
No Geometry
-
+
+ Unknown Geometry
+
None
-
Geometry
- Геометр
+
Geography
-
TopoGeometry
-
Query could not be canceled [%1]
-
PQgetCancel failed
-
-
- Multipoint
-
-
- Multiline
-
-
- Multipolygon
-
-
- Unknown Geometry
-
QgsPostgresProvider
-
- Unable to access relation
- Хамааралд хандахгүй
-
-
- No suitable key column in table
- Тохирох түлхүүр багана хүснэгтэнд алга
-
-
- and
- ба
-
-
- Unable to find a key column
- Түлхүүр багана олдсонгүй
-
-
- and is suitable.
- ба тохиромжтой.
-
-
- and has a suitable constraint)
- ба тохиромжтой constraint бүхий)
-
-
- and does not have a suitable constraint)
- ба тохиромжтой constraint байхгүй)
-
-
- No suitable key column in view
- Тохиромжтой түлхүүр багана үзүүлбэрт алга
-
-
- Unknown geometry type
- Геометрийн төрөл мэдэгдэхгүй
-
-
- Unable to get feature type and srid
- Объектийн төрөл ба srid олдсонгүй
-
-
- PostgreSQL
- PostgreSQL
-
invalid PostgreSQL layer
-
-
- Read attempt on an invalid postgresql data source
-
-
- unexpected formatted field type '%1' for field %2
-
-
- Duplicate field %1 found
-
-
-
- PostgreSQL is still in recovery after a database crash
-(or you are connected to a (read-only) slave).
-Write accesses will be denied.
-
-
- The custom query is not a select query.
-
-
- Unable to execute the query.
-The error message from the database was:
-%1.
-SQL: %2
-
-
- Whole number (integer - 32bit)
-
-
- Whole number (integer - 64bit)
-
-
- Text, limited variable length (varchar)
-
-
- Text, unlimited length (text)
-
-
- Date
-
-
- Field %1 ignored, because of unsupported type type %2
-
-
- Unable to access the %1 relation.
-The error message from the database was:
-%2.
-SQL: %3
-
-
- Unable to determine table access privileges for the %1 relation.
-The error message from the database was:
-%2.
-SQL: %3
-
-
- Whole number (smallint - 16bit)
-
PostGIS
-
invalid PostgreSQL topology layer
-
PostgreSQL layer has no primary key.
-
+
+ Whole number (smallint - 16bit)
+
+
+ Whole number (integer - 32bit)
+
+
+ Whole number (integer - 64bit)
+
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
- Аравтын тоо (бодит)
+
Decimal number (double)
- Аравтын тоо (double)
+
Text, fixed length (char)
-
+
+ Text, limited variable length (varchar)
+
+
+ Text, unlimited length (text)
+
+
+ Date
+
PostgreSQL layer has unknown primary key type.
-
+
+ Read attempt on an invalid postgresql data source
+
FAILURE: Field %1 not found.
-
+
+ unexpected formatted field type '%1' for field %2
+
Field %1 ignored, because of unsupported type %2
-
+
+ Field %1 ignored, because of unsupported type type %2
+
+
+ Duplicate field %1 found
+
+
+
+ Unable to access the %1 relation.
+The error message from the database was:
+%2.
+SQL: %3
+
+
+ PostgreSQL is still in recovery after a database crash
+(or you are connected to a (read-only) slave).
+Write accesses will be denied.
+
+
+ Unable to determine table access privileges for the %1 relation.
+The error message from the database was:
+%2.
+SQL: %3
+
+
+ The custom query is not a select query.
+
+
+ Unable to execute the query.
+The error message from the database was:
+%1.
+SQL: %2
+
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
Unexpected relation type '%1'.
-
No key field for query given.
-
Could not find topology of layer %1.%2.%3
-
PostGIS error while adding features: %1
-
PostGIS error while deleting features: %1
-
PostGIS error while adding attributes: %1
-
PostGIS error while deleting attributes: %1
-
PostGIS error while changing attributes: %1
-
PostGIS error while changing geometry values: %1
-
result of extents query invalid: %1
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
PostgreSQL version: unknown
-
unknown
- мэдэгдэхгүй
+
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -45152,7 +40716,7 @@ PostGIS %2
Loading layer %1
-
Project File Read Error
-
%1 at line %2 column %3
-
Project file read error: %1 at line %2 column %3
-
%1 for file %2
-
Unable to save to file %1
-
%1 is not writable. Please adjust permissions (if possible) and try again.
-
Unable to save to file %1. Your project may be corrupted on disk. Try clearing some space on the volume and check file permissions before pressing save again.
-
@@ -45220,22 +40784,22 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select project file
- Төсөл ажлыг сонгох
+
QGIS files
-
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -45243,173 +40807,173 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select layers and groups to embed
- Шигтгэх Давхарга, Бүлэгийг сонгох
+
Project file
- Төсөл ажил
+
...
- ...
+
QgsProjectProperties
- Layer
- Давхарга
+
+
+ Type
+
Type
- Төрөл
-
-
- Identifiable
-
- Vector
- Вестор
+
- WMS
- WMS
+
- Raster
- Растер
+
- Coordinate System Restriction
-
- No coordinate systems selected. Disabling restriction.
-
- Selection color
-
+
+ Measure tool (CRS transformation: %1)
+
Measure tool (CRS transformation: %1)
-
-
- Canvas units (CRS transformation: %1)
-
+ OFF
-
+ ON
-
- CRS %1 was already selected
-
+
+ Coordinate System Restrictions
+
Coordinate System Restrictions
-
-
- The current selection of coordinate systems will be lost.
Proceed?
-
- Select print composer
-
- Composer Title
-
- Select restricted layers and groups
-
+
+ Enter scale
+
Enter scale
- Scale denominator
+
- Scale denominator
- Load scales
+
Load scales
-
-
- XML files (*.xml *.XML)
-
-
XML files (*.xml *.XML)
+
+
+ Save scales
-
- Parameters:
-
-
- Select %1 from pull-down menu to adjust radii
-
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
-
-
- Select a valid symbol
-
- Invalid symbol :
-
+
+ Parameters:
+
+
+ Select %1 from pull-down menu to adjust radii
+
+
+ Can only use ellipsoidal calculations when CRS transformation is enabled
+
@@ -45419,401 +40983,41 @@ Proceed?
Project Properties
Төслийн Мөнчанар
-
- Meters
- Метр
-
-
- Feet
- Feet
-
-
- Decimal degrees
- Аравт өнцөг
-
-
- Default project title
- Төслийн заасан нэр
-
General
Ерөнхий
-
- Automatic
- Автоматаар
-
-
- Automatically sets the number of decimal places in the mouse position display
- Хулганы байрлалын цонхонд гарах аравтын оронг автоматаар тохируулна
-
General settings
Ерөнхий тохиргоо
- Degrees, Minutes, Seconds
- Project title
+
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
- Хулганы байрлалын цонхонд гарах аравтын оронг автоматаар тохируулахдаа хулганыг нэг пикселээр шилжүүлэхэд байрлалын өөрчлөлт нь мэдэгдэж байх нөхцлийг хангана
+ Descriptive project name
+
- Manual
- Гараар
+ Default project title
+ Төслийн заасан нэр
- WMS Server
- WMS Сервер
+ Selection color
+
- Title
- Гарчиг
-
-
- Person
- Иргэн
-
-
- Default symbols
-
-
- Transparency
- Тунгалагжилт
-
-
- %
-
-
- Phone
- Утасны дугаар
-
-
- Abstract
- Хураангуй
-
-
- E-Mail
- Э-Хаяг
-
-
- Service capabilities
-
-
- Organization
- Байгууллага
-
-
- Online resource
-
-
- WMS capabilities
-
-
- Min. X
- X ХБ
-
-
- Min. Y
- Y ХБ
-
-
- Max. X
- X ХИ
-
-
- Max. Y
- Y ХИ
-
-
- Use Current Canvas Extent
-
-
- Add
- Нэмэх
-
-
- Remove
- Хасах
-
-
- Used
-
-
- Project scales
-
-
- ...
- ...
-
-
- Marker
- Тэмдэглэгч
-
-
- Line
-
-
- Fill
-
-
- Color Ramp
- Өнгөний шилжилт
-
-
- Style Manager
-
-
- Options
-
-
- Assign random colors to symbols
-
-
- WFS capabilities
-
-
- Published
-
-
- Macros
-
-
- Fees
- Төлбөр
-
-
- Access constraints
-
-
- Keyword list
-
-
- Add geometry to feature response
-
-
- Exclude layers
-
-
- Advertised URL
-
-
- Width
- Өргөн
-
-
- Height
- Өндөр
-
-
- Maximums for GetMap request
-
-
- Advertised extent
-
-
- CRS restrictions
-
-
- Exclude composers
-
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
-
- Update
- Шинэчлэх
-
-
- Insert
-
-
- Delete
-
-
- Unselect all
-
-
- Select all
-
-
- WCS capabilities
-
-
- Python macros
-
-
- Identifiable layers
-
-
- Project layers
-
-
- Layer
- Давхарга
-
-
- Type
- Төрөл
-
-
- Identifiable
-
-
- Sets the number of decimal places to use for the mouse position display
- Хулганы байрлалын цонхонд гарах аравтын оронг тохируулах
-
-
- CRS
-
-
- Coordinate Reference System
- Солбицолын Лавлах Систем
-
-
- Identify layers
-
-
- Default styles
-
-
- OWS server
-
-
- Relations
- Холбоосууд
+ Background color
+ Дэвсгэр өнгө
Save paths
-
- Project file
- Төсөл ажил
-
-
- Measure tool
- Хэмжих багаж
+
- Ellipsoid
-(for distance calculations)
- Semi-minor
+
+
+ Semi-major
+
Semi-major
-
-
- Semi-minor
-
-
- Used when CRS transformation is turned off
-
- Canvas units
-
- Meters
+ Метр
+
+
+ Feet
+ Feet
+
+
+ CRS
+
+
+ Coordinate Reference System
+
+
+ Identify layers
+
+
+ Default styles
+
+
+ OWS server
+
+
+ Ellipsoid
+(for distance calculations)
+
+
+ Degree
-
- Nautical miles
-
-
- Degree display
-
- Decimal degrees
+ Аравт өнцөг
+
+
+ Degrees, Minutes
-
- The number of decimal places for the manual option
- Гараар тохируулгад зориулсан аравтын орны тоо
+ Degrees, Minutes, Seconds
+
- decimal places
- аравтын орон
-
-
- Precision
Нарийвчлал
- Digitizing
- Тоо болгох
+ Automatically sets the number of decimal places in the mouse position display
+ Хулганы байрлалын цонхонд гарах аравтын оронг автоматаар тохируулна
- Descriptive project name
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
+ Хулганы байрлалын цонхонд гарах аравтын оронг автоматаар тохируулахдаа хулганыг нэг пикселээр шилжүүлэхэд байрлалын өөрчлөлт нь мэдэгдэж байх нөхцлийг хангана
- Project title
- Automatic
+ Автоматаар
- Selection color
- Sets the number of decimal places to use for the mouse position display
+ Хулганы байрлалын цонхонд гарах аравтын оронг тохируулах
- Background color
- Дэвсгэр өнгө
+ Manual
+ Гараар
- The number of decimal places for the manual option
+ Гараар тохируулгад зориулсан аравтын орны тоо
+
+
+ decimal places
+ аравтын орон
+
+
+ Project scales
+
+
+ ...
+
+
+ Enable 'on the fly' CRS transformation
-
+
+ Identifiable layers
+
+
+ Project layers
+
+
+ Layer
+ Давхарга
+
+
+ Type
+ Төрөл
+
+
+ Identifiable
+
+
+ Marker
+
+
+ Line
+
+
+ Default symbols
+
+
+ Fill
+
+
+ Color Ramp
+
+
+ Transparency
+
+
+ %
+
+
+ Style Manager
+
+
+ Options
+
+
+ Relations
+
+
+ Nautical miles
+
+
+ Assign random colors to symbols
+
+
+ Service capabilities
+
+
+ Person
+ Иргэн
+
+
+ Title
+
+
+ Organization
+ Байгууллага
+
+
+ Online resource
+
+
+ E-Mail
+ Э-Хаяг
+
+
+ Phone
+ Утасны дугаар
+
+
+ Abstract
+ Хураангуй
+
+
+ Fees
+
+
+ Access constraints
+
+
+ Keyword list
+
+
+ WMS capabilities
+
+
+ Add geometry to feature response
+
+
+ Min. X
+ X ХБ
+
+
+ Min. Y
+ Y ХБ
+
+
+ Max. X
+ X ХИ
+
+
+ Max. Y
+ Y ХИ
+
+
+ Use Current Canvas Extent
+
+
+ Used
+
+
+ Exclude composers
+
+
+ WFS capabilities
+
+
+ WCS capabilities
+
+
+ Exclude layers
+
+
+ Quality for JPEG images ( 10 : smaller image - 100 : best quality )
+
+
+ Published
+
+
+ Update
+
+
+ Insert
+
+
+ Delete
+
+
+ Unselect all
+
+
+ Select all
+
+
+ Macros
+
+
+ Advertised URL
+
+
+ Width
+
+
+ Height
+
+
+ Maximums for GetMap request
+
+
+ Advertised extent
+
+
+ CRS restrictions
+
+
+ Python macros
+
QgsProjectionSelector
-
- All
- Бүгд
-
User Defined Coordinate Systems
-
Geographic Coordinate Systems
-
Projected Coordinate Systems
-
Resource Location Error
-
Error reading database file from:
%1
Because of this the projection selector will not work...
-
QgsProjectionSelectorBase
-
- Authority ID
-
-
- Search
- Хайх
-
-
- Find
- Олох
-
-
- Name
- Нэр
-
Coordinate Reference System Selector
- Солбицлын Тогтолцоо Сонгогч
+
Filter
- Шүүлтүүр
+
Recently used coordinate reference systems
-
Coordinate Reference System
- Солбицолын Лавлах Систем
+
Selected CRS:
-
+
+ Authority ID
+
ID
- ID
+
Coordinate reference systems of the world
-
Hide deprecated CRSs
-
@@ -46045,7 +41571,7 @@ Because of this the projection selector will not work...
Set provider filter on %1
-
The where clause returned %n row(s).
returned test rows
-
-
+
An error occurred when executing the query.
-
The data provider said:
%1
-
Error in Query
-
The subset string could not be set
-
@@ -46099,196 +41622,149 @@ The data provider said:
Query Builder
- Хүсэлт Бүтээгч
+
Datasource
-
Fields
- Талбар
+
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
-
Values
- Утга
+
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
-
Sample
- Жишээ
+
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
-
All
- Бүгд
+
Use unfiltered layer
-
Operators
- Оператор
+
=
- =
+
<
- <
+
NOT
- NOT
+
OR
- OR
+
AND
- AND
+
%
- %
+
IN
- IN
+
NOT IN
- NOT IN
+
!=
- !=
+
>
- >
+
LIKE
- LIKE
+
ILIKE
- ILIKE
+
>=
- >=
+
<=
- <=
+
Provider specific filter expression
-
-
- SQL where clause
- SQL where clause
-
-
-
- QgsQuickPrint
-
- km
- км
-
-
- mm
- мм
-
-
- cm
- см
-
-
- m
- м
-
-
- mile
- мил
-
-
- foot
- foot
-
-
- feet
- Fuß
-
-
- degree
- өнцөг
-
-
- degrees
- өнцөг
-
-
- unknown
- мэдэгдэхгүй
+
@@ -46297,29 +41773,29 @@ p, li { white-space: pre-wrap; }
Editable
- Засварлах боломжтой
+
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -46327,32 +41803,32 @@ p, li { white-space: pre-wrap; }
Form
-
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
- Алхам
+
Maximum
- Хамгийн их
+
Minimum
- Хамгийн бага
+
Local minimum/maximum = 0/0
-
@@ -46378,7 +41854,7 @@ p, li { white-space: pre-wrap; }
Raster calculator
-
Result layer
-
Current layer extent
-
Add result to project
-
Raster calculator expression
-
QgsRasterDataProvider
-
- Identify
- Тодорхойлох
-
-
- Build Pyramids
- Пирамид үүсгэх
-
-
- Band
- Суваг
-
Format not supported
-
-
- Average
- Дундаж
-
-
- Nearest Neighbour
- Ойрын Хөрш
-
-
- Cubic
- Шоон
-
-
- Mode
- Горим
+
Value
- Утга
+
Text
- Текст
+
Html
-
Feature
- Объект
+
@@ -46622,41 +42070,61 @@ p, li { white-space: pre-wrap; }
Default
- Өгөгдмөл
+
No compression
-
Low compression
-
High compression
-
JPEG compression
-
+
+ Cannot get create options for driver %1
+
+
+ For details on pyramids options please see the following pages
+
+
+ No help available
+
cannot validate pyramid options
-
Cannot validate creation options
-
+
+ Valid
+
pyramid creation option
-
creation option
-
-
- Cannot get create options for driver %1
-
-
- For details on pyramids options please see the following pages
-
-
- No help available
-
-
- Valid
- Хүчинтэй
+
Profile name:
-
Use simple interface
-
Use table interface
-
@@ -46718,62 +42166,62 @@ Click on help button to get valid creation options for this format.
Form
-
New
- Шинэ
+
Remove
- Хасах
+
Reset
-
Profile
-
Name
- Нэр
+
Value
- Утга
+
+
- +
+
Validate
-
Help
-
-
- -
+
Insert KEY=VALUE pairs separated by spaces
-
@@ -46781,119 +42229,119 @@ Click on help button to get valid creation options for this format.
Visibility
- Үзэгдэх
+
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Show all bands
-
Show RGB/Gray band(s)
-
Show selected band
-
Display
- Дэлгэц
+
Draw as lines
-
Draw as lines (only int layers)
-
Actions
- Үйлдэл
+
Reset
-
Load min/max
-
Estimate (faster)
- Ойролцоогоор (хурдан)
+
Actual (slower)
- Бодитоор (удаан)
+
Current extent
- Одоогийн орон зайн хүрээ
+
Use stddev (1.0)
-
Use stddev (custom)
-
Load for each band
-
Recompute Histogram
-
Band %1
- Суваг %1
+
Choose a file name to save the map image as
-
@@ -46901,62 +42349,58 @@ Click on help button to get valid creation options for this format.
Form
-
-
- Band
- Суваг
+
Set min/max style for
-
Min
- ХБ
+
Pick Min value on graph
-
...
- ...
+
Max
- ХИ
+
Pick Max value on graph
-
Prefs/Actions
-
Save plot
-
Save as image...
- Зураг хэлбэрт хадгалах...
+
Compute Histogram
-
@@ -46964,27 +42408,27 @@ Click on help button to get valid creation options for this format.
Identify
- Тодорхойлох
+
Build Pyramids
- Пирамид үүсгэх
+
Create Datasources
-
Remove Datasources
-
Band
- Суваг
+
@@ -46996,115 +42440,115 @@ Click on help button to get valid creation options for this format.
Not Set
Тохируулаагүй
+
+ QgsRasterLayer created
+
Raster
- Растер
+
- Driver:
- Драйвэр:
+ No Data Value
+ Өгөгдлийн Утга Алга
- Dimensions:
- Хэмжээс:
+ NoDataValue not set
+
- Origin:
- Эхлэл:
-
-
- Pixel Size:
- Пикселийн хэмжээ:
-
-
- Pyramid overviews:
- Пирамид үзүүлбэр:
+ Could not determine raster data type.
+ Растер өгөгдлийн төрлийг тодорхойлж чадахгүй байна.
Driver
- Драйвэр
+
Data Type
-
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Cell Count
Нүдний Тоо
-
- <maplayer> not found.
-
-
- Data Type:
- Өгөгдлийн Төрөл:
-
-
- GDT_Byte - Eight bit unsigned integer
- GDT_Byte - 8 бит тэмдэггүй бүхэл тоо
-
-
- GDT_UInt16 - Sixteen bit unsigned integer
- GDT_UInt16 - 16 бит тэмдэггүй бүхэл тоо
-
-
- GDT_Int16 - Sixteen bit signed integer
- GDT_Int16 - 16 бит тэмдэгтэй бүхэл тоо
-
-
- GDT_UInt32 - Thirty two bit unsigned integer
- GDT_UInt32 - 32 бит тэмдэггүй бүхэл тоо
-
-
- GDT_Int32 - Thirty two bit signed integer
- GDT_Int32 - 32 бит тэмдэгтэй бүхэл тоо
-
-
- GDT_Float32 - Thirty two bit floating point
- GDT_Float32 - 32 бит бутархай тоо
-
-
- GDT_Float64 - Sixty four bit floating point
- GDT_Float64 - 64 бит бутархай тоо
-
-
- GDT_CInt16 - Complex Int16
- GDT_CInt16 - Комплекс Int16
-
-
- GDT_CInt32 - Complex Int32
- GDT_CInt32 - Комплекс Int32
-
-
- GDT_CFloat32 - Complex Float32
- GDT_CFloat32 - Комплекс Float32
-
-
- GDT_CFloat64 - Complex Float64
- GDT_CFloat64 - Комплекс Float64
-
-
- Could not determine raster data type.
- Растер өгөгдлийн төрлийг тодорхойлж чадахгүй байна.
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
- Average Magphase
- Дундаж Magphase
-
-
- Average
- Дундаж
-
-
- Layer Spatial Reference System:
- Давхаргын Оронзайн Лавлах Систем:
-
-
- Project Spatial Reference System:
- Төслийн Оронзайн Лавлах Систем:
-
-
- out of extent
- өргөтгөлийн гадна
-
-
- null (no data)
- тэг (өгөгдөл үгүй)
-
-
- Dataset Description
- Багц Өгөгдлийн Тодорхойлолт
-
-
- No Data Value
- Өгөгдлийн Утга Алга
-
-
- NoDataValue not set
-
-
- QgsRasterLayer created
- <maplayer> not found.
+
QgsRasterLayerProperties
-
- Grayscale
- Харцагаан
-
-
- Pseudocolor
- Хуурмагөнгө
-
-
- Freak Out
- Бүдгэрүүлэх
-
Not Set
- Тохируулгагүй
-
-
- From
-
-
- To
- хүртэл
-
-
- not defined
-
-
- Write access denied
- Бичихээр хандаж болохгүй
-
-
- Write access denied. Adjust the file permissions and try again.
-
-
- Бичих эрх байхгүй. Файлд хандах зөвшөөрлөө тохируулаад давтан хий.
-
-
-
-
- Building pyramids failed.
- Пирамид байгуулах бүтэлгүйтэв.
-
-
- Building pyramid overviews is not supported on this type of raster.
- Энэ төрлийн растерт пирамид байгуулах үзүүлбэр боломжгүй.
-
-
- Columns:
- Багана:
-
-
- Rows:
- Мөр:
-
-
- No-Data Value:
-
-
- n/a
- n/a
+
Description
Тайлбар
-
- Value
- Утга
-
-
- Color
- Өнгө
-
-
- Label
- Шошго
-
Large resolution raster layers can slow navigation in QGIS.
-
By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom.
-
You must have write access in the directory where the original data is stored to build pyramids.
-
+
+ Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
+
+
+ Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
+
Layer Properties - %1
-
Nearest neighbour
- Ойрын хөрш
+
Bilinear
-
Cubic
- Шоон
+
Average
- Дундаж
+
None
-
Percent Transparent
-
Indexed Value
-
- Filter
- Шүүлтүүр
+ From
+
- User Defined
- Хэрэглэгчийн тодорхойлсон
+ To
+
- The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
-
- Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
-
- Save file
- Ажлыг хадгалах
-
-
- Save layer properties as style file
-
-
- Textfile (*.txt)
- Текст ажил (*.txt)
-
-
- QGIS Generated Transparent Pixel Value Export File
-
-
- Band %1
- Суваг %1
-
-
- Open file
- Ажил нээх
-
-
- Import Error
- Алдаа
-
-
- out of extent
- өргөтгөлийн гадна
-
-
- Read access denied
-
-
- Read access denied. Adjust the file permissions and try again.
-
-
-
-
- Color Ramp
- Өнгөний шилжилт
-
-
- Default Style
- Өгөгдмөл Загвар
-
-
- QGIS Layer Style File (*.qml)
- QGIS Давхаргын Загвар Файл (*.qml)
-
-
- QGIS
- QGIS
-
-
- Colormap
- Өнгөний шилжилт
-
-
- Linear
- Шугаман
-
-
- Exact
- Яг
-
-
- Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
-
-
- Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
-
-
- Load layer properties from style file
-
-
- QGIS Layer Style File
-
-
- Saved Style
-
-
- <h3>Multiband Image Notes</h3><p>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:</p><ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul>
- COMMENTED OUT
- <h3>Multiband Image Notes</h3><p>Энэ бол олон сувагт дүрс. Харцагаан буюу өнгөд харгалзуулан сонгож болно (RGB). Өнгөт дүрсийн хувьд сувгийг тохирох өнгөд харгалзуулна. Жишээ нь, хэрэв та 7 сувгийн landsat дүрстэй бол дараахи байдлаар харгалзуулж болно:</p><ul><li>Үзэгдэх хөх (0.45 to 0.52 микрон) - гаргахгүй</li><li>Үзэгдэх ногоон (0.52 to 0.60 микрон) - гаргахгүй</li></li>Үзэгдэх Улаан (0.63 to 0.69 микрон) - улаанаар гаргах</li><li>Ойрын Нилулаан (0.76 to 0.90 microns) - ногооноор гаргах</li><li>Дунд Нилулаан (1.55 to 1.75 microns) - гаргахгүй</li><li>Дулааны Нилулаан (10.4 to 12.5 microns) - гаргахгүй</li><li>Дунд Нилулаан (2.08 to 2.35 microns) - хөхөөр гаргах</li></ul>
-
-
- <h3>Paletted Image Notes</h3> <p>This image uses a fixed color palette. You can remap these colors in different combinations e.g.</p><ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul>
- COMMENTED OUT
- <h3>Paletted Image Notes</h3> <p>Энэ дүрс тогтсон өнгө ашиглана. Эдгээр өнгийг янз бүрээр нийлүүлэн зураг гаргаж болно.</p><ul><li>Улаан - хөх дүрс</li><li>Ногоон - хөх дүрс</li><li>Хөх - ногоон дүрс</li></ul>
-
-
- <h3>Grayscale Image Notes</h3> <p>You can remap these grayscale colors to a pseudocolor image using an automatically generated color ramp.</p>
- COMMENTED OUT
- <h3>Харцагаан Дүрсийн Тайлбар</h3> <p>Автомат өнгийн хуваарийг ашиглан харцагаан дүрсийг өнгөөр гаргаж болно.</p>
+ not defined
+
Rows: %1
Мөр: %1
+
+ Columns:
+ Багана:
+
+
+ n/a
+ n/a
+
+
+ Rows:
+ Мөр:
+
+
+ No-Data Value:
+
No-Data Value: %1
-
+
+ Write access denied
+
Write access denied. Adjust the file permissions and try again.
-
+
+ Building pyramids failed.
+
+
+ The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
+
+
+ Building pyramid overviews is not supported on this type of raster.
+
+
+ Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
+
+
+ Save file
+ Ажлыг хадгалах
Textfile
-
+
+ QGIS Generated Transparent Pixel Value Export File
+
+
+ Value
+
+
+ Write access denied. Adjust the file permissions and try again.
+
+
+
+
+ Open file
+ Ажил нээх
+
+
+ Import Error
+ Алдаа
The following lines contained errors
%1
-
- Unknown style format: %1
- Үл мэдэгдэх загварын төрөл: %1
+ Read access denied
+
+
+ Read access denied. Adjust the file permissions and try again.
+
+
+
+
+ Default Style
+ Өгөгдмөл Загвар
+
+
+ Load layer properties from style file
+
+
+ QGIS Layer Style File
+
+
+ Saved Style
+
+
+ Save layer properties as style file
+
@@ -47653,19 +42916,225 @@ Click on help button to get valid creation options for this format.
Растер Давхаргын Мөнчанар
- General
- Ерөнхий
+ Save Style ...
+ Загвар ажлыг хадгалах...
- Symbology
- Тэмдэгзүй
+ Load Style ...
+ Загвар ажил дуудах...
- <p align="right">Full</p>
- <p align="right">Full</p>
+ Resolutions
+
+
+ Save As Default
+ Өгөгдсмөл болгож хадгалах
+
+
+ Restore Default Style
+ Өгөгдмөл Загварыг сэргээх
+
+
+ Render type
+
+
+ Resampling
+
+
+ Oversampling
+
+
+ Transparency
+ Тунгалагжилт
+
+
+ Style
+
+
+ Layer info
+
+
+ Description
+
+
+ Keyword list
+
+
+ Format
+
+
+ Attribution
+
+
+ Url
+
+
+ MetadataUrl
+
+
+ Type
+
+
+ LegendUrl
+
+
+ image/png
+
+
+ image/jpeg
+
+
+ image/jpg
+
+
+ Properties
+
+
+ Band rendering
+
+
+ Color rendering
+
+
+ Saturation
+
+
+ Off
+
+
+ By lightness
+
+
+ By luminosity
+
+
+ By average
+
+
+ Hue
+
+
+ Blending mode
+
+
+ Brightness
+
+
+ Contrast
+
+
+ Grayscale
+
+
+ Colorize
+
+
+ Strength
+
+
+ %
+
+
+ Reset all color rendering options to default
+
+
+ Reset
+
+
+ Zoomed: in
+
+
+ out
+
+
+ Global transparency
+ Нийтийн тунгалагжилт
Үгүй
- Layer info
- 00%
+ 00%
- displayed as
- <p align="right">Full</p>
+ <p align="right">Full</p>
- Layer name
- Давхаргын нэр
-
-
- Add values from display
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
-
- Description
- Тайлбар
-
-
- Keyword list
-
-
- Format
- Хэлбэр
-
-
- Attribution
-
-
- Url
-
-
- MetadataUrl
-
-
- Type
- Төрөл
-
-
- LegendUrl
-
-
- image/png
-
-
- image/jpeg
-
-
- image/jpg
-
-
- Properties
-
-
- Band rendering
-
-
- Color rendering
-
-
- Saturation
-
-
- Off
-
-
- By lightness
-
-
- By luminosity
-
-
- By average
-
-
- Hue
-
-
- Blending mode
-
-
- Brightness
-
-
- Contrast
-
-
- Grayscale
- Харцагаан
-
-
- Colorize
-
-
- Strength
-
-
- %
- %
-
-
- Reset all color rendering options to default
-
-
- Reset
-
-
- Zoomed: in
-
-
- out
-
-
- Oversampling
- No data value
+ Өгөгдлийн утга байхгүй
Use original source no data value.
-
No data value:
-
Original data source no data value, if exists.
-
<src no data value>
-
Additional user defined no data value.
-
Additional no data value
-
- Metadata
- Metadata
+ Custom transparency options
+ Хэрэглэгчийн тунгалагжилтын сонголт
- Pyramids
- Пирамид
+ Transparency band
+ Сувгийн тунгалагжилт
- Resolutions
- Add values from display
+
- Average
- Дундаж
+ Transparent pixel list
+
- Nearest Neighbour
- Ойрын Хөрш
-
-
- Thumbnail
- Thumbnail
-
-
- Histogram
- Гистограм
-
-
- Options
- Хувилбарууд
-
-
- Chart Type
- Графикийн Төрөл
-
-
- Refresh
- Сэргээх
-
-
- Max
- ХИ
-
-
- Min
- ХБ
-
-
- 00%
- 00%
+ Add values manually
+ Утгуулыг гараар нэмэх
...
...
-
- Colormap
- Өнгөний шилжилт
-
-
- Delete entry
- Оруулсан утгыг устгах
-
-
- Classify
- Ангилах
-
-
- 1
- 1
-
-
- 2
- 2
-
-
- Single band gray
- Дан суваг-саарал
-
-
- Style
- Загвар
-
-
- Three band color
- Гурван суваг-өнгө
-
-
- RGB mode band selection and scaling
- RGB Сувагийн тохиргоо ба хэмжээ
-
-
- Red band
- Улаан
-
-
- Green band
- Ногоон
-
-
- Blue band
- Цэнхэр
-
-
- Save current RGB composition as default. This setting will be persistent between QGIS sessions.
- Одоогийн RGB хослолыг өгөгдсөл болгон хадгалах. Энэ тохиргоо нь QGIS-ийн аль ч горимд хүчинтэй байх болно.
-
-
- Custom min / max values
- Хэрэглэгчийн ХБ / ХИ утга
-
-
- Red min
- Улаан ХБ
-
-
- Red max
- Улаан ХИ
-
-
- Green min
- Ногоон ХБ
-
-
- Green max
- Ногоон ХИ
-
-
- Blue min
- Цэнхэр ХБ
-
-
- Blue max
- Цэнхэр ХИ
-
-
- Save current standard deviation value as default. This setting will be persistent between QGIS sessions.
- Одоогийн Стандарт хазайлтын утгыг өгөгдмөл байдлаар хадгалах. Энэ тохиргоо нь QGIS-ийн аль ч горимд хүчинтэй байх болно.
-
-
- Single band properties
- Дан сувгийн шинж чанар
-
-
- Gray band
- Саарал суваг
-
-
- Color map
- Өнгөт зураг
-
-
- Invert color map
- Эсрэг өнгө
-
-
- Use standard deviation
- Стандарт хазайлтыг ашиглах
-
-
- Load min / max values from band
- Сувгийн ХБ / ХИ утгыг дуудах
-
-
- Estimate (faster)
- Ойролцоогоор (хурдан)
-
-
- Actual (slower)
- Бодитоор (удаан)
-
-
- Current extent
- Одоогийн орон зайн хүрээ
-
-
- Load
- Дуудах
-
-
- Current
- Одоогийн
-
-
- Default
- Өгөгдмөл
-
-
- TextLabel
- ТекстШошго
-
-
- Title
- Гарчиг
-
-
- Abstract
-
-
- Save as image...
- Зураг хэлбэрт хадгалах...
-
-
- Transparency
- Тунгалагжилт
-
-
- Note
- Тэмдэглэл
-
-
- Global transparency
- Нийтийн тунгалагжилт
-
-
- No data value
- Өгөгдлийн утга байхгүй
-
-
- Custom transparency options
- Хэрэглэгчийн тунгалагжилтын сонголт
-
-
- Style
- mRendererTab
- Загвар
-
-
- Render type
-
-
- Resampling
-
-
- Transparency band
- Сувгийн тунгалагжилт
-
-
- Transparent pixel list
-
-
- Add values manually
- Утгуулыг гараар нэмэх
-
-
- Add Values from display
- Дэлгэцнээс утга нэмэх
-
Remove selected row
@@ -48202,96 +43243,26 @@ p, li { white-space: pre-wrap; }
Гаргах
- Scale dependent visibility
- General
+ Ерөнхий
- Maximum
- Хамгийн их
+ Layer name
+
- Minimum
- Хамгийн бага
+ displayed as
+
Layer source
Давхаргын эх сурвалж
-
- Display name
- Дэлгэцний нэр
-
-
- Specify the coordinate reference system of the layer's geometry.
- Давхаргын геометрийн солбицлын системийн зааж өгнө үү.
-
-
- Specify...
- Зааж өгөх...
-
-
- Resampling method
-
-
- Build pyramids
- Пирамид үүсгэх
-
-
- Overview format
-
-
- External
-
-
- Internal (if possible)
-
-
- External (Erdas Imagine)
-
-
- Restore Default Style
- Өгөгдмөл Загварыг сэргээх
-
-
- Save As Default
- Өгөгдсмөл болгож хадгалах
-
-
- Load Style ...
- Загвар ажил дуудах...
-
-
- Save Style ...
- Загвар ажлыг хадгалах...
-
-
- Default R:1 G:2 B:3
- Өгөгдмөл R:1 G:2 B:3
-
-
- Sort
- Төрөлжүүлэх
-
Columns
@@ -48307,11 +43278,32 @@ p, li { white-space: pre-wrap; }
No Data
Өгөгдөл байхгүй
+
+ Scale dependent visibility
+
Coordinate reference system
Солбицлын систем
+
+ Specify the coordinate reference system of the layer's geometry.
+ Давхаргын геометрийн солбицлын системийн зааж өгнө үү.
+
+
+ Specify...
+ Зааж өгөх...
+
+
+ Thumbnail
+ Thumbnail
+
Legend
@@ -48323,12 +43315,82 @@ p, li { white-space: pre-wrap; }
Өнгөний хослол
- Notes
- Тэмдэглэл
+ Metadata
+ Metadata
- Build pyramids internally if possible
- Боломжтой бол дотоод пирамид үүсгэх
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
+
+
+ Title
+
+
+ Abstract
+
+
+ Pyramids
+ Пирамид
+
+
+ Average
+ Дундаж
+
+
+ Nearest Neighbour
+ Ойрын Хөрш
+
+
+ Build pyramids
+ Пирамид үүсгэх
+
+
+ Resampling method
+
+
+ Overview format
+
+
+ External
+
+
+ Internal (if possible)
+
+
+ External (Erdas Imagine)
+
+
+ Histogram
+ Гистограм
@@ -48336,67 +43398,67 @@ p, li { white-space: pre-wrap; }
From
-
To
- хүртэл
+
Select output directory
-
Warning
- Анхааруулга
+
The directory %1 contains files which will be overwritten: %2
-
Select output file
-
GeoTIFF
-
layer
-
user defined
-
Resolution (current: %1)
-
Layer (%1, %2)
-
Project (%1, %2)
-
Selected (%1, %2)
-
@@ -48404,171 +43466,175 @@ p, li { white-space: pre-wrap; }
Save raster layer as...
-
Output mode
-
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Format
- Хэлбэр
+
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
+
+ Create VRT
+
Save as
- Нэрлэж хадгалах
+
Browse...
- Зам заах...
+
CRS
-
Change ...
- Өөрчлөх ...
+
Extent
-
-
- West
- Өрнөд
-
-
- East
- Дорнод
-
-
- North
- Хойд
-
-
- South
- Өмнөд
+
Resolution
-
Horizontal
- Хэвтээ
+
Columns
- Багана
+
Rows
- Мөр
+
Layer resolution
-
Layer size
-
Vertical
- Босоо
+
VRT Tiles
-
-
- Create Options
-
Maximum number of columns in one tile.
-
Max columns
-
Maximum number of rows in one tile.
-
Max rows
-
- Create VRT
- Create Options
+
+
+ Pyramids
+
+
+ Resolutions
+
+
+ Pyramid resolutions corresponding to levels given
+
+
+ Use existing
+
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
-
Add values manually
- Утгуулыг гараар нэмэх
+
...
- ...
+
Load user defined fully transparent (100%) values
-
Remove selected row
- Сонгогдсон мөрийг хасах
+
Clear all
- Бүгдийг цэвэрлэх
-
-
- Pyramids
- Пирамид
-
-
- Resolutions
-
-
- Pyramid resolutions corresponding to levels given
-
-
- Use existing
-
@@ -48619,12 +43665,12 @@ datasets with maximum width and height specified below.
No option selected
-
Please select an option to load min/max values.
-
@@ -48632,74 +43678,74 @@ datasets with maximum width and height specified below.
Form
-
Load min/max values
-
-
- -
+
%
- %
+
Min / max
-
Extent
-
Full
-
Current
- Одоогийн
+
Accuracy
-
Actual (slower)
- Бодитоор (удаан)
+
Estimate (faster)
- Ойролцоогоор (хурдан)
+
Cumulative
count cut
-
Mean +/-
standard deviation ×
-
Load
- Дуудах
+
@@ -48707,62 +43753,62 @@ standard deviation ×
Form
-
-
- Custom levels
-
-
- Internal (if possible)
-
Insert positive integer values separated by spaces
-
External (GTiff .ovr)
-
+
+ Internal (if possible)
+
External (Erdas Imagine .aux)
-
-
- Average
- Дундаж
-
-
- Nearest Neighbour
- Ойрын Хөрш
-
-
- Overview format
-
-
- Create Options
-
Levels
-
+
+ Create Options
+
Resampling method
-
+
+ Average
+
+
+ Nearest Neighbour
+
+
+ Custom levels
+
+
+ Overview format
+
@@ -48770,53 +43816,53 @@ standard deviation ×
Unknown
-
User defined
-
Estimated
-
Exact
- Яг
+
min / max
-
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
-
@@ -48824,184 +43870,176 @@ standard deviation ×
Export Frequency distribution as csv
-
Export Colors and elevations as xml
-
Import Colors and elevations from xml
-
Error opening file
-
The relief color file could not be opened
-
Error parsing xml
-
The xml file could not be loaded
-
Enter result file
- Үр дүнгийн ажлыг оруулах
+
Enter lower elevation class bound
-
Elevation
-
Enter upper elevation class bound
-
Select color for relief class
-
QgsRasterTerrainAnalysisDialogBase
- Analysis
- Дун шинжилгээ
+ Dialog
+
- Input layer
- Оролтын Давхагра
+ Elevation layer
+
Output layer
Гаралтын Давхарга
-
- Output format
- Гаралтын Төрөл
-
...
...
- Dialog
- Харилцах цонх
-
-
- Elevation layer
- Output format
+ Гаралтын Төрөл
Z factor
-
Add result to project
-
Illumination
-
Azimuth (horizontal angle)
-
Vertical angle
-
Relief colors
-
Create automatically
-
Export distribution...
-
Up
- Дээшээ
+
Down
- Доошоо
+
+
- +
+
-
- -
+
Lower bound
-
Upper bound
-
Color
- Өнгө
+
Export colors...
-
Import colors...
-
@@ -49009,41 +44047,41 @@ standard deviation ×
Terrain analysis
-
Slope
-
Aspect
-
Hillshade
-
Relief
-
Ruggedness index
-
Calculating hillshade...
-
Abort
-
Calculating relief...
-
Calculating slope...
-
Calculating aspect...
-
Ruggedness
-
Calculating ruggedness...
-
-
- Abort...
- Зогсоох...
+
@@ -49089,7 +44123,7 @@ standard deviation ×
Preview Expression
-
@@ -49097,32 +44131,32 @@ standard deviation ×
Dialog
- Харилцах цонх
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -49130,19 +44164,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -49150,49 +44184,45 @@ standard deviation ×
[Generated automatically]
-
QgsRelationAddDlgBase
-
- Dialog
- Харилцах цонх
-
Add relation
-
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
- Нэр
+
Id
- Id
+
@@ -49200,43 +44230,43 @@ standard deviation ×
Form
-
Toggle editing
-
New
- Шинэ
+
Delete
-
Link
-
Unlink
-
Form View
-
Table View
-
@@ -49244,47 +44274,47 @@ standard deviation ×
Dialog
- Харилцах цонх
+
Name
- Нэр
+
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
- Id
+
Add Relation
-
Remove Relation
-
@@ -49292,17 +44322,17 @@ standard deviation ×
Open Form
-
(no selection)
- (Сонголт байхгүй)
+
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -49310,83 +44340,65 @@ standard deviation ×
Rule properties
-
Label
- Шошго
+
Filter
- Шүүлтүүр
+
...
- ...
+
Test
- Testen
+
Description
- Тайлбар
+
Scale range
-
Symbol
- Тэмдэг
+
Error
- Алдаа
+
Filter expression parsing error:
-
Evaluation error
-
Filter returned %n feature(s)
number of filtered features
-
-
-
-
-
- QgsRendererRulesTreeWidget
-
- (no filter)
- (шүүлт байхгүй)
-
-
- scale
- масштаб
-
-
- any scale
- дурын масштаб
+
@@ -49399,19 +44411,19 @@ standard deviation ×
Size scale field
-
Scale area
-
Scale diameter
-
- expression -
-
- талбаргүй -
-
- QgsRendererV2PropertiesDialog
-
- Symbology
- Тэмдэгзүй
-
-
QgsRendererV2PropsDialogBase
@@ -49450,35 +44455,27 @@ standard deviation ×
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
-
- Symbol levels
- Таних тэмдэгийн Түвшин
-
-
- Old symbology
- Хуучин тэмдэгзүй
+
This renderer doesn't implement a graphical interface.
-
@@ -49486,88 +44483,88 @@ standard deviation ×
Copy
- Хуулах
+
Paste
-
Change color
-
Change transparency
-
Change output unit
-
Change width
-
Change size
-
Transparency
- Тунгалагжилт
+
Change symbol transparency [%]
-
Symbol unit
-
Select symbol unit
-
Millimeter
- Миллметр
+
Map unit
-
Width
- Өргөн
+
Change symbol width
-
Size
- Хэмжээ
+
Change symbol size
-
@@ -49575,210 +44572,185 @@ standard deviation ×
(no filter)
- (шүүлт байхгүй)
+
<li><nobr>%1 features also in rule %2</nobr></li>
-
Label
- Шошго
+
Rule
-
Min. scale
-
Count
-
Duplicate count
-
Max. scale
-
Number of features in this rule.
-
Number of features in this rule which are also present in other rule(s).
-
QgsRuleBasedRendererV2Widget
-
- Label
- Шошго
-
-
- Add
- Нэмэх
-
Add rule
-
Edit rule
-
Remove rule
-
-
- Count features
-
-
- Rendering order...
-
-
- None
- No grouping for displaying rules
- Үгүй
-
-
- Edit
- Засах
-
-
- Remove
- Хасах
+
Refine current rules
-
- Enable symbol levels
- Таних тэмдэгийн түвшинг идэвхжүүлэх
+ Count features
+
+
+ Rendering order...
+
Remove Rule
-
Refine current rule
-
Add scales to rule
-
Add categories to rule
-
Add ranges to rule
-
Refine a rule to categories
-
Refine a rule to ranges
-
Scale refinement
-
Parent rule %1 must have a symbol for this operation.
-
Please enter scale denominators at which will split the rule, separate them by commas (e.g. 1000,5000):
-
Error
- Алдаа
+
"%1" is not valid scale denominator, ignoring it.
-
Calculating feature count.
-
Abort
-
QgsRunProcess
+
+ <b>Starting %1...</b>
+
+
+ Action
+
+
+ Unable to run command
+%1
+
Done
Хийгдсэн
-
- Action
-
-
- <b>Starting %1...</b>
-
-
- Unable to run command
-%1
-
Unable to run command %1
-
@@ -49786,61 +44758,61 @@ standard deviation ×
Database does not exist
-
Failed to open database
-
Failed to check metadata
-
Failed to get list of tables
-
Unknown error
-
Delete
-
%1: Not a vector layer!
-
%1: OK!
-
Import to SpatiaLite database
-
Failed to import some layers!
-
Import was successful.
-
@@ -49850,146 +44822,108 @@ standard deviation ×
Delete layer
-
Layer deleted successfully.
-
QgsSLRootItem
+
+ New Connection...
+
Create database...
-
New SpatiaLite Database File
- Шинэ SpatiaLite Өгөгдлийн сангийн Сан
-
-
- SpatiaLite (*.sqlite *.db )
- SpatiaLite (*.sqlite *.db )
-
-
- New Connection...
-
SpatiaLite
-
Create SpatiaLite database
-
The database has been created
-
Failed to create the database:
-
-
-
- QgsSVGDiagramFactoryWidget
-
- Select svg file
- SVG ажил сонгох
-
-
- Creating icon for file %1
- %1 ажилд icon үүсгэх
-
-
-
- QgsSVGDiagramFactoryWidgetBase
-
- Search directories
- Хайлт хийх замууд
-
-
- Add...
- Нэмэх...
-
-
- Remove
- Хасах
-
-
- ...
- ...
+
QgsSVGFillSymbolLayerWidget
-
- Select svg texture file
- svg файлыг сонго
-
Texture width
-
SVG file
-
Millimeter
- Миллметр
+
Map unit
-
Select SVG texture file
-
All files
- Бүх ажил
+
Rotation
- Эргэлт
+
Color
- Өнгө
+
Border color
- Хүрээний өнгө
+
Border width
- Хүрээний өргөн
+
@@ -49997,212 +44931,70 @@ standard deviation ×
Save style in database
-
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
QgsSaveToDBDialog
-
- Add column
- Багана Нэмэх
-
Save style
-
Description
- Тайлбар
+
UI
-
Style Name
-
Use as default style for this layer
-
Open...
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
-
-
- QgsScaleBarPlugin
-
- metres/km
- метр/км
-
-
- feet
- Fuß
-
-
- degrees
- өнцөг
-
-
- km
- км
-
-
- mm
- мм
-
-
- cm
- см
-
-
- m
- м
-
-
- foot
- foot
-
-
- degree
- өнцөг
-
-
- unknown
- мэдэгдэхгүй
-
-
- Top Left
- Зүүн Дээд
-
-
- Bottom Left
- Зүүн Доод
-
-
- Top Right
- Баруун Дээд
-
-
- Bottom Right
- Баруун Доод
-
-
- Tick Down
- Доош Тэмдэглэх
-
-
- Tick Up
- Дээш Тэмдэглэх
-
-
- Bar
- Багана
-
-
- Box
- Хайрцаг
-
-
- &Scale Bar
- &Хэмжээсийн шугам
-
-
- Creates a scale bar that is displayed on the map canvas
- Зургийн тавцанд гарах хэмжээсийг үүсгэх
-
-
- &Decorations
- &Чимэглэл
-
-
-
- QgsScaleBarPluginGuiBase
-
- Scale Bar Plugin
- Хэмжээсийн Өргөтгөл
-
-
- Top Left
- Зүүн Дээд
-
-
- Top Right
- Баруун Дээд
-
-
- Bottom Left
- Зүүн Доод
-
-
- Bottom Right
- Баруун Доод
-
-
- Tick Down
- Доош Тэмдэглэх
-
-
- Tick Up
- Дээш Тэмдэглэх
-
-
- Box
- Цонх
-
-
- Bar
- Багана
-
-
- Select the style of the scale bar
- Хэмжээсийн баганын загварыг сонгох
-
-
- Enable scale bar
- Хэмжээсийн баганыг зөвшөөрөх
-
-
- Automatically snap to round number on resize
- Хэмжээг өөрчлөхдөө автоматаар бүдүүвчилнэ
+
@@ -50211,29 +45003,29 @@ standard deviation ×
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -50241,22 +45033,73 @@ standard deviation ×
Scale visibility
-
QgsSearchQueryBuilder
+
+ Search query builder
+
+
+ &Test
+
+
+ &Clear
+
+
+ &Save...
+
+
+ Save query to an xml file
+
+
+ &Load...
+
+
+ Load query from xml file
+
Search results
Хайлтын дүн
+
+ Found %n matching feature(s).
+ test result
+
Search string parsing error
Мөр танилтын алдааг хайх
+
+ Evaluation error
+
+
+ Error during search
+ Хайлтад алдаа
+
No Records
@@ -50267,64 +45110,10 @@ standard deviation ×
The query you specified results in zero records being returned.
Таны өгсөн хүсэлтийн хариуд нэг ч бичлэг олдсонгүй.
-
- Search query builder
-
-
- &Test
- &Шалгах
-
-
- &Clear
- &Цэвэрлэх
-
-
- &Save...
-
-
- Save query to an xml file
-
-
- &Load...
-
-
- Load query from xml file
-
-
- Found %n matching feature(s).
- test result
-
-
-
-
- Evaluation error
-
-
- Error during search
- Хайлтад алдаа
-
Save query to file
-
Could not open file for writing
-
Load query from file
-
Query files
-
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
Select attribute
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -50385,65 +45174,51 @@ standard deviation ×
Validation started.
-
Validation finished (%n error(s) found).
number of geometry errors
-
-
+
ring %1, vertex %2
-
polygon %1, ring %2, vertex %3
-
polyline %1, vertex %2
-
vertex %1
- оройн цэг %1
+
point %1
- цэг %1
+
single point
-
QgsShapeFile
-
- The database gave an error while executing this SQL:
-
-
- ... (rest of SQL trimmed)
- is appended to a truncated SQL statement
-
Scanning
-
+
+ The database gave an error while executing this SQL:
+
+
+ ... (rest of SQL trimmed)
+ is appended to a truncated SQL statement
+
The error was:
%1
-
@@ -50470,48 +45256,48 @@ The error was:
Millimeter
- Миллметр
+
Map unit
-
Color (start)
-
Color (end)
-
Blur radius
-
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -50520,28 +45306,28 @@ The error was:
Millimeter
- Миллметр
+
Map unit
-
Color
- Өнгө
+
Border color
- Хүрээний өнгө
+
Border width
- Хүрээний өргөн
+
@@ -50551,44 +45337,44 @@ The error was:
Millimeter
- Миллметр
+
Map unit
-
Color
- Өнгө
+
Pen width
-
Offset
-
Dash pattern
-
Join style
- Нэгтгэх хэлбэр
+
Cap style
-
@@ -50598,58 +45384,54 @@ The error was:
Millimeter
- Миллметр
+
Map unit
-
Name
- Нэр
+
Fill color
- Дүүргэх өнгө
+
Border color
- Хүрээний өнгө
+
Outline width
- Хүрээний өргөн
-
-
- Size
- Хэмжээ
+
Angle
- Өнцөг
+
Offset
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -50657,32 +45439,32 @@ The error was:
Black to white
-
White to black
-
No enhancement
-
Stretch to MinMax
-
Stretch and clip to MinMax
-
Clip to MinMax
-
@@ -50690,33 +45472,33 @@ The error was:
Form
-
Contrast
enhancement
-
Gray band
- Саарал суваг
+
Min
- ХБ
+
Max
- ХИ
+
Color gradient
-
@@ -50728,7 +45510,7 @@ enhancement
Discrete
-
Linear
- Шугаман
+
Exact
- Яг
+
Continuous
-
Equal interval
-
Custom color map entry
-
Load Color Map
-
The color map for band %1 has no entries
-
Open file
- Ажил нээх
+
Textfile (*.txt)
- Текст ажил (*.txt)
+
Import Error
- Алдаа
+
The following lines contained errors
-
Read access denied
-
Read access denied. Adjust the file permissions and try again.
-
Save file
- Ажлыг хадгалах
+
QGIS Generated Color Map Export File
-
Write access denied
- Бичихээр хандаж болохгүй
+
Write access denied. Adjust the file permissions and try again.
- Бичих эрх байхгүй. Файлд хандах зөвшөөрлөө тохируулаад давтан хий.
-
-
+
@@ -50837,30 +45617,22 @@ enhancement
Form
-
Band
- Суваг
+
Color interpolation
-
- Delete entry
- Оруулсан утгыг устгах
-
-
- Sort
- Төрөлжүүлэх
-
-
- Load color map from band
- Add values manually
+
...
- ...
-
-
- Add values manually
- Утгуулыг гараар нэмэх
+
Remove selected row
- Сонгогдсон мөрийг хасах
+
Sort colormap items
-
+
+ Load color map from band
+
Load color map from file
-
Export color map to file
-
Value
- Утга
+
Color
- Өнгө
+
Label
- Шошго
+
Clip
-
Generate new color map
-
-
- Invert
-
-
- Classes
- Ангий
-
-
- Min / Max origin
-
-
- Min / max origin:
-
Mode
- Горим
+
+
+ Classes
+
Min
- ХБ
+
Max
- ХИ
+
+
+ Invert
+
Classify
- Ангилах
-
-
-
- QgsSingleSymbolDialog
-
- None
- Хоосон
+
- Open File
- Ажил нээх
+ Min / max origin:
+
- Images (*.png *.xpm *.jpg)
- Зураг (*.png *.xpm *.jpg)
-
-
-
- QgsSingleSymbolDialogBase
-
- Single Symbol
- Нэг Тэмдэг
-
-
- Size
- Хэмжээ
-
-
- In map units
- Зургийн нэгжээр
-
-
- Rotation
- Эргэлт
-
-
- Symbol
- Тэмдэг
-
-
- Width
- Өргөн
-
-
- ...
- ...
-
-
- Label
- Шошго
+ Min / Max origin
+
@@ -51018,7 +45740,7 @@ enhancement
Symbol levels...
-
@@ -51026,32 +45748,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -51059,12 +45781,12 @@ enhancement
Form
-
The Symbol
-
@@ -51072,22 +45794,22 @@ enhancement
ALL the constraints
-
any ONE of the constraints
-
Invalid name
-
The smart group name field is empty. Kindly provide a name
-
@@ -51095,27 +45817,27 @@ enhancement
Smart Group Editor
-
Smart Group Name
-
Condition matches
-
Add Condition
-
Conditions
-
@@ -51123,34 +45845,34 @@ enhancement
Snapping and Digitizing Options
-
to vertex
-
to segment
-
to vertex and segment
-
map units
- зургийн нэгж
+
pixels
- пиксел
+
@@ -51158,12 +45880,7 @@ enhancement
Snapping options
-
-
- Enable topological editing
-
Tolerance
-
Avoid Int.
-
Avoid intersections of new polygons
-
+
+ Enable topological editing
+
Enable snapping on intersection
-
@@ -51206,84 +45928,84 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
unknown error cause
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
UNKNOWN
-
GEOMETRY
-
POINT
-
LINESTRING
-
POLYGON
-
MULTIPOINT
-
MULTILINESTRING
-
MULTIPOLYGON
-
GEOMETRYCOLLECTION
-
QgsSpatiaLiteProvider
-
- Text
- Текст
-
Binary object (BLOB)
Хоёртын обьект (BLOB)
+
+ Text
+ Текст
+
Decimal number (double)
@@ -51297,12 +46019,38 @@ enhancement
Retrieval of spatialite version failed
-
+
+ SpatiaLite
+
Could not parse spatialite version string '%1'
-
SQLite error: %2
SQL: %1
-
-
- SpatiaLite
-
unknown cause
-
FAILURE: Field %1 not found.
-
@@ -51384,59 +46106,69 @@ SQL: %1
Add SpatiaLite Table(s)
-
Databases
-
+
+ &Update statistics
+
&Add
- &Нэмэх
+
+
+ &Set Filter
+
Wildcard
-
RegExp
-
All
- Бүгд
+
Table
- Хүснэгт
+
Type
- Төрөл
+
Geometry column
- Геометр багана
+
Sql
- Sql
+
Confirm Update Statistics
-
Update Statistics
-
Internal statistics successfully updated for: %1
-
Error while updating internal statistics for: %1
-
+
+ @
+
+
+ Choose a SpatiaLite/SQLite DB to open
+
SpatiaLite DB
-
All files
- Бүх ажил
+
Error
- Алдаа
+
Cannot add connection '%1' : a connection with the same name already exists.
-
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+
+
+ Confirm Delete
+
+
+ Select Table
+
+
+ You must select a table in order to add a Layer.
+
SpatiaLite DB Open Error
-
Database does not exist: %1
-
Failure while connecting to: %1
%2
-
-
- SpatiaLite Error
-
-
- Unexpected error when working with: %1
-
-%2
-
-
- @
- @
-
-
- &Update statistics
-
-
- &Set Filter
-
-
- Choose a SpatiaLite/SQLite DB to open
-
-
- Confirm Delete
- Хасахаа Баталгаажуулах
-
-
- Select Table
- Хүснэгт Сонгох
-
-
- You must select a table in order to add a Layer.
- Давхарга нэмэхийн тулд хүснэгт сонговол зохино.
+
SpatiaLite getTableInfo Error
-
Failure exploring tables from: %1
%2
-
- Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
-
-
-
- QgsSpatiaLiteSourceSelectBase
-
- Delete
- Хасах
+ SpatiaLite Error
+
- New
- Шинэ
-
-
- Connect
- Холбох
-
-
- Search
- Хайх
+ Unexpected error when working with: %1
+
+%2
+
@@ -51594,191 +46297,188 @@ but implies better performance thereafter.
Table
- Хүснэгт
+
Type
- Төрөл
+
Geometry column
- Геометр багана
+
Sql
- Sql
+
Point
- Цэг
+
Multipoint
-
Line
- Шугам
+
Multiline
-
Polygon
- Олонталт
+
Multipolygon
-
QgsSpatialQueryDialog
+
+ The spatial query requires at least two vector layers
+
%n selected geometries
selected geometries
-
-
+
Selected geometries
-
+
+ %1)Query
+
+
+ Begin at %L1
+
< %1 >
-
+
+ Total of features = %1
+
+
+ Total of invalid features:
+
+
+ Finish at %L1 (processing time %L2 minutes)
+
+
+ Using the field "%1" for subset
+
+
+ Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
+
%1 of %2
-
all = %1
-
-
- %1)Query
-
-
- The spatial query requires at least two vector layers
-
-
- Begin at %L1
-
-
- Total of features = %1
-
-
- Total of invalid features:
-
-
- Finish at %L1 (processing time %L2 minutes)
-
-
- Using the field "%1" for subset
-
-
- Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
%1 of %2(selected features)
-
Create new selection
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
user
-
Map "%1" "on the fly" transformation.
-
enable
-
disable
- идэвхгүй болгох
+
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Zoom to feature
-
Missing reference layer
-
Select reference layer!
-
Missing target layer
-
Select target layer!
-
Create new layer from items
-
The query from "%1" using "%2" in field not possible.
-
Create new layer from selected
-
%1 of %2 identified
-
-
- DEBUG
- Алдаа Засагч
+
@@ -51844,127 +46540,127 @@ CRS of map is %1.
Spatial Query
-
Layer on which the topological operation will select geometries
-
Select source features from
-
Select the target layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
-
Selected feature(s) only
-
Where the feature
-
+
+ Select the topological operation
+
Layer whose geometries will be used as reference by the topological operation
-
Reference features of
-
-
- And use the result to
-
-
- Selected features
-
-
- Number of selected features in map
-
-
- Create layer with selected
-
-
- Select one FID to identify geometry of feature
-
-
- Create layer with list of items
-
-
- Zoom to item
-
-
- Log messages
-
Select the reference layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
-
+
+ And use the result to
+
+
+ Selected features
+
+
+ Number of selected features in map
+
+
+ Create layer with selected
+
Result feature ID's
-
- Run query or close the window
- Select one FID to identify geometry of feature
+
- Select the topological operation
- Create layer with list of items
+
+
+ Zoom to item
+
Check to show log processing of query
-
+
+ Log messages
+
+
+ Run query or close the window
+
@@ -51974,12 +46670,12 @@ p, li { white-space: pre-wrap; }
&Spatial Query
-
Query not executed
-
Алдаа Засагч
-
- QgsSpatialiteSridsDialog
-
- SpatiaLite Database
- SpatiaLite Өгөгдлийн сан
-
-
- Unable to open the database
- Өгөгдлийн санг нээх боломжгүй
-
-
- Error
- Алдаа
-
-
- Failed to load SRIDS: %1
- SRIDS-ийг ачааллахад алдаа: %1
-
-
QgsSpatialiteSridsDialogBase
@@ -52022,7 +46699,7 @@ p, li { white-space: pre-wrap; }
Authority
- Эрх
+
QgsSpit
+
+ File Name
+ Файлын нэр
+
+
+ Feature Class
+ Объектийн Анги
+
+
+ Features
+ Объект
+
+
+ DB Relation Name
+ ӨС Хамаарлын Нэр
+
+
+ Schema
+ Бүдүүвч
+
+
+ Are you sure you want to remove the [%1] connection and all associated settings?
+ Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
Confirm Delete
Хасахаа Баталгаажуулах
- Shapefiles (*.shp);;All files (*)
- Shapefiles (*.shp);;Бүх төрөл (*)
+ Add Shapefiles
+ Shapefiles Нэмэх
+
+
+ Shapefiles
+
+
+ All files
+
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
[Өгөгдсөн (Геометрийн Баганын Нэр)] - баганын нэрийг 'the_geom' болгох
+
+ [Global Schema] - set the schema for all files to be imported into
+ [Global Schema] - схемийг оруулж ирэх бүх ажлуудад зааж өгнө үү
+
[Import] - import the current shapefiles in the list
@@ -52195,11 +46918,31 @@ p, li { white-space: pre-wrap; }
You need to specify a Connection first
Холболтыг эхлээд зааж өгөх хэрэгтэй
+
+ Password for %1
+ %1-ийн Нэвтрэх үг
+
+
+ Please enter your password:
+ Нэвтрэх үгээ оруулна уу:
+
Connection failed - Check settings and try again
Холболт бүтэлгүйтэв - Тохируулгыг шалгаад давтан хий
+
+ PostGIS not available
+ PostGIS байхгүй байна
+
+
+ <p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
+ <p>Сонгосон баазад PostGIS суугаагүй байна, энэ нь орон зайн өгөгдөл хадгалахад шаардлагатай.</p>
+
You need to add shapefiles to the list first
@@ -52225,86 +46968,6 @@ p, li { white-space: pre-wrap; }
Problem inserting features from file:
Файлаас объект оруулахад алдаа гарав:
-
- Import Shapefiles - Relation Exists
- Shape файл Импортлох - Хамаарал Байна
-
-
- File Name
- Файлын нэр
-
-
- Feature Class
- Объектийн Анги
-
-
- Features
- Объект
-
-
- DB Relation Name
- ӨС Хамаарлын Нэр
-
-
- Schema
- Бүдүүвч
-
-
- Add Shapefiles
- Shapefiles Нэмэх
-
-
- PostGIS not available
- PostGIS байхгүй байна
-
-
- <p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
- <p>Сонгосон баазад PostGIS суугаагүй байна, энэ нь орон зайн өгөгдөл хадгалахад шаардлагатай.</p>
-
-
- %1 of %2 shapefiles could not be imported.
- %2-ийн %1 shapefile-ийг оруулж ирэх боломжгүй байна.
-
-
- Please enter your password:
- Нэвтрэх үгээ оруулна уу:
-
-
- Are you sure you want to remove the [%1] connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
-
-
- Shapefiles
-
-
- All files
- Бүх ажил
-
-
- [Global Schema] - set the schema for all files to be imported into
- [Global Schema] - схемийг оруулж ирэх бүх ажлуудад зааж өгнө үү
-
-
- Password for %1
- %1-ийн Нэвтрэх үг
-
%1
@@ -52350,6 +47013,11 @@ The following fields are duplicates:
%1
<p>SQL-ийг уншуулахад алдаа:</p><p>%2</p><p>Мэдээллийн сан нь:%3</p>
+
+ Import Shapefiles - Relation Exists
+ Shape файл Импортлох - Хамаарал Байна
+
The Shapefile:
@@ -52369,6 +47037,11 @@ Do you want to overwrite the [%2] relation?
Та [%2] холбоосыг дарахдаа итгэлтэй байна уу?
+
+ %1 of %2 shapefiles could not be imported.
+ %2-ийн %1 shapefile-ийг оруулж ирэх боломжгүй байна.
+
QgsSpitBase
@@ -52377,26 +47050,102 @@ Do you want to overwrite the [%2] relation?
SPIT - Shapefile to PostGIS Import Tool
SPIT - PostGIS Импорт Багажийн Shape Файл
+
+ PostgreSQL connections
+
+
+ Connect to PostGIS
+
+
+ Connect
+
+
+ Create a new PostGIS connection
+ Шинэ PostGIS холболт үүсгэх
+
+
+ New
+ Шинэ
+
+
+ Edit the current PostGIS connection
+ Одоогийн PostGIS холболтыг засах
+
+
+ Edit
+ Засах
+
+
+ Remove the current PostGIS connection
+ Одоогийн PostGIS холболтыг салгах
+
Remove
Хасах
+
+ Import options and shapefile list
+
+
+ Geometry column name
+
+
+ Set the geometry column name to the default value
+ Геомтрийн баганын урьдчилсан нэр өгөх
+
+
+ Use default geometry column name
+
SRID
- SRID
+
- Remove All
- Бүгдийг Хасах
+ Set the SRID to the default value
+ SRID урьдчилсан утга өгөх
- Add
- Нэмэх
+ Use default SRID
+
+
+ Primary key column name
+
+
+ Global schema
+
shape файлыг импортлох файлын жагсаалтанд нэмэх
- PostgreSQL connections
-
-
- Geometry column name
-
-
- Use default geometry column name
-
-
- Use default SRID
-
-
- Primary key column name
-
-
- Global schema
- Add
+ Нэмэх
Бүх shape файлыг импортлох файлын жагсаалтаас хасах
- Set the SRID to the default value
- SRID урьдчилсан утга өгөх
-
-
- Set the geometry column name to the default value
- Геомтрийн баганын урьдчилсан нэр өгөх
-
-
- New
- Шинэ
-
-
- Create a new PostGIS connection
- Шинэ PostGIS холболт үүсгэх
-
-
- Remove the current PostGIS connection
- Одоогийн PostGIS холболтыг салгах
-
-
- Connect
- Холбох
-
-
- Edit
- Засах
-
-
- Edit the current PostGIS connection
- Одоогийн PostGIS холболтыг засах
-
-
- Import options and shapefile list
-
-
- Connect to PostGIS
- Remove All
+ Бүгдийг Хасах
@@ -52539,8 +47212,8 @@ Do you want to overwrite the [%2] relation?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -52554,14 +47227,155 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
QgsSqlAnywhereProvider
+ Failed to load interface
+
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
- Геометрийн төрөл мэдэгдэхгүй
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
@@ -52569,163 +47383,163 @@ p, li { white-space: pre-wrap; }
Select all
-
Clear selection
-
Import style(s)
-
file specified below
-
URL specified below
-
Select symbols to import
-
Import
- Импорт
+
Export style(s)
-
Export
- Гаргах
+
Export/import error
-
You should select at least one symbol/color ramp.
-
Save styles
-
XML files (*.xml *.XML)
-
Error when saving selected symbols to file:
%1
-
Import error
-
An error occured during import:
%1
-
Group Name
-
Please enter a name for new group:
-
imported
-
New Group
-
New group cannot be created without a name. Kindly enter a name.
-
New group
-
Cannot create a group without name. Enter a name.
-
Duplicate names
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
-
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
-
Load styles
-
XML files (*.xml *XML)
- XML ажил (*.xml *XML)
+
Downloading style ...
-
HTTP Error!
-
Download failed: %1.
-
@@ -52738,17 +47552,17 @@ Overwrite?
Import from
-
Location
- Байрлал
+
Save to group
-
QgsStyleV2ManagerDialog
+
+ Type here to filter symbols...
+
+
+ Share Menu
+
+
+ Export
+
+
+ Import
+
+
+ Group Actions
+
+
+ Group Symbols
+
+
+ Edit Smart Group
+
Marker symbol (%1)
-
Line symbol (%1)
-
Fill symbol (%1)
-
Color ramp (%1)
-
-
- new symbol
-
-
- Save symbol
-
-
- Symbol with name '%1' already exists. Overwrite?
-
Gradient
-
-
- Type here to filter symbols...
-
-
- Share Menu
-
-
- Export
- Гаргах
-
-
- Import
- Импорт
-
-
- Group Actions
-
-
- Group Symbols
-
-
- Edit Smart Group
-
Random
-
ColorBrewer
-
cpt-city
-
+
+ new symbol
+
new marker
-
new line
-
new fill symbol
-
Symbol Name
-
Please enter a name for new symbol:
-
+
+ Save symbol
+
Cannot save symbol without name. Enter a name.
-
+
+ Symbol with name '%1' already exists. Overwrite?
+
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Color Ramp Name
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Cannot save color ramp without name. Enter a name.
-
Save color ramp
-
Color ramp with name '%1' already exists. Overwrite?
-
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
-
Invalid selection
-
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
Error!
- Алдаа!
+
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
Database Error
- Өгөгдлийн сангийн алдаа
+
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Add Group
-
Remove Group
-
Apply Group
-
Un-group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
-
- XML files (*.xml *XML)
- XML ажил (*.xml *XML)
+
@@ -53083,51 +47893,42 @@ There was a problem with your symbol database.
Style Manager
-
Marker
- Тэмдэглэгч
+
Line
- Шугам
+
Fill
-
Color ramp
-
Tags
- Тэмдэглэгээ
+
Add item
-
-
- Share
-
-
- Add
- Нэмэх
+
Edit item
-
Remove item
-
- Remove
- Хасах
+ Share
+
@@ -53149,51 +47951,51 @@ There was a problem with your symbol database.
Select vector layers to add...
- Нэмэх вектор давхаргыг сонгоно уу...
+
Layer ID
- Давхарга ID
+
Layer name
- Давхаргын нэр
+
Number of features
-
Geometry type
- Геометр төрөл
+
Select raster layers to add...
- Нэмэх растер давхаргыг сонгоно уу...
+
Select layers to add...
-
Type
- Төрөл
+
Select All
-
@@ -53201,12 +48003,12 @@ There was a problem with your symbol database.
Select layers to load
- Ачааллах давхаргуудыг сонго
+
1
- 1
+
@@ -53214,22 +48016,22 @@ There was a problem with your symbol database.
SVG annotation
-
Delete
-
Select SVG file
- SVG өжил сонгох
+
SVG files
-
@@ -53237,23 +48039,23 @@ There was a problem with your symbol database.
SVG request failed [error: %1 - url: %2]
-
SVG
-
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -53261,21 +48063,35 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
QgsSvgMarkerSymbolLayerV2Widget
+
+ Millimeter
+
+
+ Map unit
+
Select SVG file
@@ -53284,65 +48100,47 @@ There was a problem with your symbol database.
SVG files
-
-
- Size
- Хэмжээ
-
-
- Millimeter
- Миллметр
-
-
- Map unit
-
Border width
- Хүрээний өргөн
+
Angle
- Өнцөг
+
Offset
-
SVG file
-
Color
- Өнгө
+
Border color
- Хүрээний өнгө
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -53350,12 +48148,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -53363,17 +48161,17 @@ There was a problem with your symbol database.
Select SVG file
- SVG өжил сонгох
+
SVG files
-
File not found
-
@@ -53381,17 +48179,17 @@ There was a problem with your symbol database.
Size
- Хэмжээ
+ Хэмжээ
area
- талбай
+ талбай
diameter
- диаметр
@@ -53417,14 +48215,7 @@ There was a problem with your symbol database.
Define the order in which the symbol layers are rendered. The numbers in the cells define in which rendering pass the layer will be drawn.
-
-
-
- QgsSymbolV2PropertiesDialog
-
- Outline: %1
- Хүрээ: %1
+
@@ -53432,27 +48223,27 @@ There was a problem with your symbol database.
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
@@ -53460,78 +48251,42 @@ There was a problem with your symbol database.
Symbol selector
-
Add symbol layer
-
Remove symbol layer
-
Lock layer's color
- Давхаргын өнгийг түгжих
+
Move up
- Дээш шилжүүлэх
+
Move down
- Доош шилжүүлэх
+
Save symbol
-
Save
- Хадгалах
-
-
- Millimeter
- Миллметр
-
-
- Color
- Өнгө
-
-
- Change
- Өөрчлөлт
-
-
- Size
- Хэмжээ
-
-
- Rotation
- Эргэлт
-
-
- °
- °
-
-
- Width
- Өргөн
-
-
- Properties
- Мөнчанар
-
-
- Advanced
- Нэмэлт
+
@@ -53539,42 +48294,42 @@ There was a problem with your symbol database.
Millimeter
- Миллметр
+
Map unit
-
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
Transparency %1%
-
@@ -53588,7 +48343,7 @@ There was a problem with your symbol database.
Clough-Toucher (cubic)
-
Select font color
Үсгийн өнгийг сонгох
-
- Select background color
- Дэвсгэр өнгө сонгох
-
QgsTextAnnotationDialogBase
Annotation text
-
I
I
-
- Background color
- Дэвсгэр өнгө
-
QgsTextEditConfigDlg
Form
-
Multiline
-
HTML
-
@@ -53691,15 +48438,11 @@ There was a problem with your symbol database.
Tile scale
-
QgsTipFactory
-
- Quantum GIS is open source
- Quantum GIS нь нээлтэй эх үүсвэрийн програм хангамж юм
-
QGIS Publications
@@ -53708,7 +48451,7 @@ There was a problem with your symbol database.
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
QGIS Mailing lists
-
Is it 'QGIS' or 'Quantum GIS'?
-
QGIS is open source
- QGIS нь нээлтэй эх үүсвэрийн програм хангамж юм
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
Moving Elements and Maps in the Print Composer
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -53896,7 +48639,7 @@ There was a problem with your symbol database.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -53945,98 +48688,16 @@ p, li { white-space: pre-wrap; }
Thin plate spline (TPS)
-
Generate ESRI world file (.tfw)
-
QgsTransformSettingsDialog
-
- Linear
- Шугаман
-
-
- Helmert
- Хелмерт
-
-
- Projective
-
-
- Polynomial 1
- Полиномиал 1
-
-
- Polynomial 2
- Полиномиал 2
-
-
- Polynomial 3
- Полиномиал 3
-
-
- Thin Plate Spline
-
-
- Info
- Мэдээ
-
-
- Please set output name
- Гаралтын нэрийг өгнө үү
-
-
- %1 requires at least %2 GCPs. Please define more
-
-
- Invalid output file name
-
-
- Save raster
-
-
- Select save PDF file
-
-
- PDF Format
- PDF Төрөл
-
-
- _modified
- Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
- _modified
-
Transformation settings
@@ -54050,27 +48711,34 @@ p, li { white-space: pre-wrap; }
Resampling method:
- Хувиргах арга:
+
Nearest neighbour
- Ойрын хөрш
+
+
+ Linear
+ Шугаман
Cubic
- Шоон
+
Cubic Spline
-
Lanczos
-
Target SRS:
-
Set Target Resolution
-
Use 0 for transparency when needed
- Нэвт харагдуулахад 0 хэрэглэх
+
Load in QGIS when done
Дууссаны дараа QGIS-д дуудах
-
-
- QgsUniqueValueDialog
- default
- өгөгдмөл
+ Helmert
+ Хелмерт
- Confirm Delete
- Устгахыг Баталгаажуулах
+ Polynomial 1
+ Полиномиал 1
- The classification field was changed from '%1' to '%2'.
-Should the existing classes be deleted before classification?
- Ангилал хийх талбар %1-ээс %2 болон өөрчлөгдлөө.
-Хуучин ангилалыг устгах уу?
-
-
-
- QgsUniqueValueDialogBase
-
- Form1
- Маягт1
+ Polynomial 2
+ Полиномиал 2
- Classify
- Ангилах
+ Polynomial 3
+ Полиномиал 3
+
+
+ Thin Plate Spline
+
+
+ Projective
+
+
+ Info
+ Мэдээ
+
+
+ Please set output name
+ Гаралтын нэрийг өгнө үү
+
+
+ %1 requires at least %2 GCPs. Please define more
+
+
+ Invalid output file name
+
+
+ Save raster
+
+
+ Select save PDF file
+
+
+ PDF Format
+ PDF Төрөл
+
+
+ _modified
+ Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
+ _modified
@@ -54169,17 +48884,17 @@ Should the existing classes be deleted before classification?
Form
-
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Editable
- Засварлах боломжтой
+
@@ -54187,12 +48902,12 @@ Should the existing classes be deleted before classification?
Form
-
Adjust scaling range
-
@@ -54200,19 +48915,18 @@ Should the existing classes be deleted before classification?
Select a file
-
Error
- Алдаа
+
Could not open file %1
Error was:%2
- %1 ажлыг нээх боломжгүй
-Алдаа нь:%2
+
@@ -54220,37 +48934,37 @@ Error was:%2
Form
-
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
- CSV ажлаас өгөгдөл дуудах
+
Value
- Утга
+
Description
- Тайлбар
+
Remove Selected
- Сонгогдсоныг Хасах
+
@@ -54258,7 +48972,7 @@ Error was:%2
Edit filter expression
-
@@ -54266,52 +48980,52 @@ Error was:%2
Form
-
Select layer, key column and value column
-
Layer
- Давхарга
+
Key column
- Гол багана
+
Value column
-
Allow null value
-
Order by value
-
Allow multiple selections
-
Filter expression
-
...
- ...
+
@@ -54319,7 +49033,7 @@ Error was:%2
(no selection)
- (Сонголт байхгүй)
+
@@ -54327,7 +49041,7 @@ Error was:%2
ColorBrewer ramp
-
Codec %1 not found. Falling back to system locale
-
Add Features
-
Delete Features
-
Change Attribute Values
-
Fast Access to Features at ID
-
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -54408,27 +49122,27 @@ Error was:%2
X attribute
-
Y attribute
-
Length attribute
-
Angle attribute
-
Height attribute
-
@@ -54436,46 +49150,46 @@ Error was:%2
Discrete
-
Continuous
-
Gradient file : %1
-
License file : %1
-
Edit Stop Color
-
Offset of the stop
-
Please enter offset in percents (%) of the new stop
-
Add Color Stop
-
@@ -54483,71 +49197,77 @@ Error was:%2
Gradient color ramp
-
-
- Change
- Өөрчлөлт
+
Color 1
-
Color 2
-
Change...
-
Type
- Төрөл
+
Multiple stops
-
-
- Offset (%)
-
Add stop
-
Remove stop
-
-
- Information
- Мэдээлэл
+
Color
- Өнгө
+
+
+ Offset (%)
+
Preview
- Тойм
+
+
+ Information
+
QgsVectorLayer
+
+ Updating feature count for layer %1
+
+
+ Abort
+
ERROR: no provider
@@ -54558,259 +49278,108 @@ Error was:%2
ERROR: layer not editable
АЛДАА: давхарга засварлагдах боломжгүй
-
- SUCCESS: attribute %1 was added.
- АМЖИЛТТАЙ: атрибут %1 нэмэгдлээ.
-
-
- ERROR: attribute %1 not added
- АЛДАА: атрибут %1 нэмэгдсэнгүй
-
-
- ERROR: %n attribute(s) not deleted.
- not deleted attributes count
-
-
-
-
-
-
-
- SUCCESS: %n attribute(s) added.
- added attributes count
-
-
-
-
-
-
-
- ERROR: %n new attribute(s) not added
- not added attributes count
-
-
-
-
-
-
-
- SUCCESS: %n attribute value(s) changed.
- changed attribute values count
-
-
-
-
-
-
-
- ERROR: %n attribute value change(s) not applied.
- not changed attribute values count
-
-
-
-
-
-
-
- SUCCESS: %n feature(s) added.
- added features count
-
-
-
-
-
-
-
- ERROR: %n feature(s) not added.
- not added features count
-
-
-
-
-
-
-
- SUCCESS: %n geometries were changed.
- changed geometries count
-
-
-
-
-
-
-
- ERROR: %n geometries not changed.
- not changed geometries count
-
-
-
-
-
-
-
- SUCCESS: %n feature(s) deleted.
- deleted features count
-
-
-
-
-
-
-
- ERROR: %n feature(s) not deleted.
- not deleted features count
-
-
-
-
-
-
-
- Updating feature count for layer %1
-
-
- Abort
-
Commit errors:
%1
-
-
- General:
- Ерөнхий:
-
-
- Extents:
- Хүрээ:
-
-
- In layer spatial reference system units :
- Давхаргын оронзайн лавлах системийн нэгжээр :
-
-
- xMin,yMin %1,%2 : xMax,yMax %3,%4
-
-
- unknown extent
-
-
- In project spatial reference system units :
- Төслийн оронзайн лавлах системийн нэгжээр :
-
-
- Layer Spatial Reference System:
- Давхаргын Оронзайн Лавлах Систем:
-
-
- Project (Output) Spatial Reference System:
- Төслийн (Үр дүн) Оронзайн Лавлах Систем::
-
-
- (Invalid transformation of layer extents)
-
-
- Attribute field info:
- Аттрибут талбарын мэдээлэл:
+
General
- Ерөнхий
+
Layer comment
-
Storage type of this layer
-
Description of this provider
-
Source for this layer
-
Geometry type of the features in this layer
-
Primary key attributes
-
The number of features in this layer
-
Editing capabilities of this layer
-
Extents
-
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
+
+ Error: qgis element could not be found
+
+
+ xMin,yMin %1,%2 : xMax,yMax %3,%4
+
+
+ unknown extent
+
+
+ (Invalid transformation of layer extents)
+
Precision
- Нарийвчлал
+
Comment
Тайлбар
-
- Error: qgis element could not be found
-
QgsVectorLayerEditBuffer
@@ -54849,195 +49413,178 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
-
+
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
-
-
-
-
+
SUCCESS: %n attribute(s) added.
added attributes count
-
-
-
-
-
+
ERROR: %n new attribute(s) not added
not added attributes count
-
-
-
-
-
+
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
-
-
-
-
+
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
-
-
-
-
+
SUCCESS: %n feature(s) deleted.
deleted features count
-
-
-
-
-
+
ERROR: %n feature(s) not deleted.
not deleted features count
-
-
-
-
-
+
SUCCESS: %n feature(s) added.
added features count
-
-
-
-
-
+
ERROR: %n feature(s) not added.
not added features count
-
-
-
-
-
+
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
-
-
-
-
+
ERROR: %n geometries not changed.
not changed geometries count
-
-
-
-
-
+
Provider errors:
-
QgsVectorLayerProperties
- Single Symbol
- Нэг Тэмдэг
+ QGIS Layer Style File
+
- Graduated Symbol
- Graduated Тэмдэг
+ SLD File
+
- Continuous Color
- Үргэлжилсэн Өнгө
+ Load from file
+
- Unique Value
- Давтагдахгүй Утга
+ Load from database
+
+
+ Save in database (%1)
+
+
+ Layer Properties - %1
+
+
+ Stop editing mode to enable this.
+
+
+ Insert expression
+
+
+ This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
+
+
+ The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
+
+
+ Not supported
+
Spatial Index
Оронзайн Индекс
+
+ Creation of spatial index successful
+
Creation of spatial index failed
Оронзайн индекс байгуулах нь бүтэлгүйтэв
- General:
- Ерөнхий:
+ Load default style from:
+
- Extents:
- Өргөтгөл:
+ Cancel
+
- In layer spatial reference system units :
- Давхаргын оронзайн лавлах системийн нэгжээр :
+ Local database
+
- In project spatial reference system units :
- Төслийн оронзайн лавлах системийн нэгжээр :
-
-
- Layer Spatial Reference System:
- Давхаргын Оронзайн Лавлах Систем:
-
-
- Project (Output) Spatial Reference System:
- Төслийн (Үр дүн) Оронзайн Лавлах Систем::
-
-
- Attribute field info:
- Аттрибут талбарын мэдээлэл:
-
-
- Field
- Талбар
-
-
- Type
- Төрөл
-
-
- Length
- Урт
-
-
- Precision
- Нарийвчлал
-
-
- Comment
- Тайлбар
+ Datasource database
+
Default Style
- Өгөгдмөл Загвар
-
-
- QGIS Layer Style File (*.qml)
- QGIS Давхаргын Загвар Файл (*.qml)
-
-
- Layer Properties - %1
-
-
- Stop editing mode to enable this.
-
-
- Insert expression
-
-
- This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
-
-
- The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
-
-
- Unique values
- Үл давтагдах утгууд
-
-
- Classification
- Ангилал
-
-
- File name
- Ажлын нэр
-
-
- Hidden
- Далд
-
-
- Calendar
- Хуанли
-
-
- Save Style
-
-
- Pie chart
- Бялуу график
-
-
- Map units
- Зургийн нэгж
-
-
- Creation of spatial index successful
-
-
- Load layer properties from style file
-
-
- QGIS Layer Style File
-
-
- SLD File
-
-
- Load from file
-
-
- Load from database
-
-
- Save in database (%1)
-
-
- Not supported
- Дэмжигдэхгүй
-
-
- Load default style from:
-
-
- Cancel
-
-
- Local database
-
-
- Datasource database
-
Loaded from Provider
-
No default style was found for this layer
-
Save default style to:
-
+
+ Load layer properties from style file
+
Load Style
-
Style saved
-
Save layer properties as style file
-
Saved Style
-
Error occured retrieving styles from database
-
The retrieved style is not a valid named style. Error message: %1
-
- Symbology
- Тэмдэгзүй
-
-
- Background color
- Дэвсгэр өнгө
-
-
- mm
- мм
-
-
- Line
- Шугам
-
-
- Horizontal
- Хэвтээ
-
-
- None
- Үгүй
-
-
- Id
- Id
-
-
- Name
- Нэр
-
-
- Load layer properties from style file (.qml)
- Загвар файлаар (.qml) давхаргын шинж чанарыг зааж өгөх
-
-
- Save layer properties as style file (.qml)
- Давхаргын шинж чанарыг Загвар файл (.qml) болгон хадгалах
+ Save Style
+
@@ -55332,8 +49699,137 @@ Error was:%2
Давхаргын Мөнчанар
- Symbology
- Тэмдэгзүй
+ Restore Default Style
+
+
+ Save As Default
+
+
+ A widget to define the scale visibility
+
+
+ A widget to define the scale visibility.
+
+
+ Memory cache
+
+
+ Description
+
+
+ Keyword list
+
+
+ DataUrl
+
+
+ Format
+
+
+ Attribution
+
+
+ Url
+
+
+ MetadataUrl
+
+
+ Type
+
+
+ LegendUrl
+
+
+ image/png
+
+
+ image/jpeg
+
+
+ image/jpg
+
+
+ Properties
+
+
+ Load Style ...
+
+
+ Save Style ...
+
+
+ Style
+
+
+ Labels
+ Шошго
+
+
+ Labels (deprecated)
+
+
+ Display labels
+ Шошго үзүүлэх
+
+
+ Fields
+
Ерөнхий
- Use scale dependent rendering
- Хэмжээст холбосон хамаарлыг ашиглах
-
-
- Display name
- Дэлгэц дэх нэр
-
-
- Use this control to set which field is placed at the top level of the Identify Results dialog box.
- Үр Дүнг Тодорхойлох харилцах цонхны дээд төвшинд байршуулах талбарыг заахдаа энэ контролийг ашигла.
-
-
- Display field for the Identify Results dialog box
- Үр дүнг Тодорхойлох харилцах цонхонд зориулсан дэлгэцийн талбар
-
-
- Style
- Загвар
-
-
- Fields
- Талбар
-
-
- This sets the display field for the Identify Results dialog box
- Үр дүнг Тодорхойлох харилцах цонхонд зориулсан дэлгэцийн талбарыг тохируулах
-
-
- Display field
- Дэлгэцийн талбар
-
-
- ...
- ...
-
-
- Subset
- Дэдбагц
+ Specify the coordinate reference system of the layer's geometry.
+
Display
- Дэлгэц
+
Rendering
- Харгалзуузлах
+
Layer info
-
Layer source
- Давхаргын эх сурвалж
+
Data source encoding
-
Coordinate reference system
- Солбицлын систем
+
Specify...
- Зааж өгөх...
+
Create spatial index
-
Update extents
-
Scale dependent visibility
-
Feature subset
-
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
- пиксел
+
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Map Tip display text
-
Inserts an expression into the action
-
Insert expression...
-
The valid attribute names for this layer
- Энэ давхаргын үзүүлэлтийн нэр нь буруу
+
Inserts the selected field into the action
-
Insert field
- Оруулалт бүтэлгүйтэв
+
HTML
-
Field
- Талбар
+
Layer name
- Давхаргын нэр
+
displayed as
-
-
- Joins
-
-
- Join layer
- Нэгтгэх давхарга
-
-
- Join field
- Нэгтгэх талбар
-
-
- Target field
-
-
- Create Spatial Index
- Оронзайн Индекс Үүсгэх
+
Metadata (Мэдээллийн лавлах)
- Labels
- Шошго
+ Title
+
- Display labels
- Шошго үзүүлэх
+ Abstract
+
Үйлдэл
- Restore Default Style
- Өгөгдмөл Загварыг сэргээх
+ Joins
+
- Save As Default
- Өгөгдсмөл болгож хадгалах
+ Join layer
+
- A widget to define the scale visibility
- Join field
+
- A widget to define the scale visibility.
-
-
- Memory cache
-
-
- Description
- Тайлбар
-
-
- Keyword list
-
-
- DataUrl
-
-
- Format
- Хэлбэр
-
-
- Attribution
-
-
- Url
-
-
- MetadataUrl
-
-
- Type
- Төрөл
-
-
- LegendUrl
-
-
- image/png
-
-
- image/jpeg
-
-
- image/jpg
-
-
- Properties
-
-
- Load Style ...
- Загвар ажил дуудах...
-
-
- Save Style ...
- Загвар ажлыг хадгалах...
-
-
- Specify the coordinate reference system of the layer's geometry.
- Давхаргын геометрийн солбицлын системийн зааж өгнө үү.
-
-
- Transparency
- Тунгалагжилт
-
-
- Options
- Хувилбарууд
-
-
- Maximum
- Хамгийн их
-
-
- Minimum
- Хамгийн бага
+ Target field
+
Diagrams
-
-
- Display diagrams
- Диаграмыг үзүүлэх
-
-
- Diagram type
- Диаграмын төрөл
-
-
- Background color
- Дэвсгэр өнгө
-
-
- Current
- Одоогийн
-
-
- Title
- Гарчиг
-
-
- Abstract
-
-
- Font...
- Үсгийн хэв...
-
-
- Size
- Хэмжээ
-
-
- Attribute
- Атрибут
-
-
- Find maximum value
- ХИ утгыг ол
-
-
- Position
- Байрлал
-
-
- x
- x
-
-
- y
- y
-
-
- Attributes
- Атрибут
-
-
- Color
- Өнгө
-
-
- Labels (deprecated)
-
-
- Ctrl+N
- Ctrl+N
-
-
- Ctrl+X
- Ctrl+X
+
QgsVectorLayerSaveAsDialog
-
- Original CRS
- Эх CRS
-
Layer CRS
-
Project CRS
-
Selected CRS
-
No symbology
-
Feature symbology
-
Symbol layer symbology
-
<Default>
-
Save vector layer as...
-
-
- Add saved file to map
-
-
- CRS
-
-
- Save as
- Нэрлэж хадгалах
+
Browse
- Хайх
-
-
- Datasource Options
-
-
- Custom Options
-
-
- Layer Options
-
Encoding
-
- Save only selected features
- CRS
+
Symbology export
-
+
+ Datasource Options
+
+
+ Custom Options
+
+
+ Layer Options
+
+
+ Save as
+
Format
- Хэлбэр
+
+
+ Save only selected features
+
Data source
- Өгөдлийн эх сурвалж
+
Layer
- Давхарга
+
This allows one to surpress attribute creation as some OGR drivers (eg. DGN, DXF) don't support it.
-
Skip attribute creation
-
+
+ Add saved file to map
+
1:
- 1:
+
Scale
- Масштаб
+
@@ -55942,31 +50189,31 @@ Error was:%2
Random color ramp
-
Hue
-
from
-
to
-
Saturation
-
Edit...
- Засах...
+
Delete
-
@@ -56002,7 +50249,7 @@ Error was:%2
New Connection...
-
@@ -56010,12 +50257,12 @@ Error was:%2
Select a layer
-
No CRS selected
-
@@ -56023,7 +50270,7 @@ Error was:%2
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -56031,35 +50278,17 @@ Error was:%2
Edit...
- Засах...
+
Delete
-
Modify WFS connection
-
-
-
- QgsWFSData
-
- Loading WFS data
- WFS-ийн өгөдлийг ачааллаж байна
-
-
- Abort
- Таслах
-
-
-
- QgsWFSPlugin
-
- Add W&FS layer...
- W&FS давхарга нэмэх...
+
@@ -56067,12 +50296,12 @@ Error was:%2
DescribeFeatureType failed for url %1
-
WFS
-
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
-
- Error
- Алдаа
+
@@ -56124,130 +50349,124 @@ Error was:%2
New Connection...
-
Create a new WFS connection
-
QgsWFSSourceSelect
-
- Error
- Алдаа
-
-
- No Layers
-
-
- capabilities document contained no layers.
-
-
- Capabilities document is not valid
-
&Add
- &Нэмэх
+
&Build query
-
Build query
-
Network Error
-
+
+ Capabilities document is not valid
+
Server Exception
-
+
+ Error
+
+
+ No Layers
+
+
+ capabilities document contained no layers.
+
Create a new WFS connection
-
Modify WFS connection
-
-
- Confirm Delete
- Хасахаа Баталгаажуулах
-
-
- Load connections
- Холболтыг ачааллах
-
-
- XML files (*.xml *XML)
- XML ажил (*.xml *XML)
+
Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
+
+ Confirm Delete
+
+
+ Load connections
+
+
+ XML files (*.xml *XML)
+
QgsWFSSourceSelectBase
- Title
- Гарчиг
+ Add WFS Layer from a Server
+
- Name
- Нэр
+ Filter:
+
- Abstract
- Товчлол
-
-
- Change ...
- Өөрчлөх ...
-
-
- Coordinate reference system
- Солбицлын систем
+ Display WFS FeatureTypes containing this word in the title, name or abstract
+
Server connections
-
+
+ C&onnect
+
&New
- &Шинэ
-
-
- Delete
- Устгах
+
Засах
- Filter:
- Шүүлт:
-
-
- Display WFS FeatureTypes containing this word in the title, name or abstract
-
-
- C&onnect
- Х&олбох
+ Delete
+ Устгах
Load connections from file
- Файлаас холболт дуудах
+
Load
- Дуудах
+
Save connections to file
- Холболтыг файл болгон хадгалах
+
Save
- Хадгалах
+
Use title for layer name
-
- Filter
- Шүүлтүүр
+ Coordinate reference system
+
- Add WFS Layer from a Server
-
-
-
- QgsWKNDiagramFactoryWidgetBase
-
- Form
- Форм
-
-
- Attributes
- Атрибут
-
-
- Add
- Нэмэх
-
-
- Remove
- Хасах
-
-
- 1
- 1
+ Change ...
+
@@ -56341,27 +50527,27 @@ Error was:%2
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
Edit...
- Засах...
+
Delete
-
@@ -56369,7 +50555,7 @@ Error was:%2
New Connection...
-
@@ -56379,6 +50565,11 @@ Error was:%2
&Add
&Нэмэх
+
+ Add selected layers to map
+ Зурагт сонгогдсон давхаргуудыг нэмэх
+
Are you sure you want to remove the %1 connection and all associated settings?
@@ -56389,27 +50580,6 @@ Error was:%2
Confirm Delete
Устгал Баталгаажуулах
-
- encoding %1 not supported.
-
-
- WMS Password for %1
- %1-ийн WMS Нэвтрэх үг
-
-
- WMS Provider
- WMS Нийлүүлэгч
-
-
- Add selected layers to map
- Зурагт сонгогдсон давхаргуудыг нэмэх
-
Load connections
@@ -56421,152 +50591,147 @@ Error was:%2
XML ажил (*.xml *XML)
- Could not open the WMS Provider
- WMS Нийлүүлэгч нээгдэх боломжгүй
+ encoding %1 not supported.
+
+
+ WMS Provider
+ WMS Нийлүүлэгч
+
+
+ Failed to parse WMS URI
+
+
+ Failed to download capabilities:
+
+
+
+ The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
+
+
+ Instead of the capabilities string that was expected, the following response has been received:
+
+%1
+
- Coordinate Reference System (%n available)
+ Options (%n coordinate reference systems available)
crs count
-
- Солбицлын Тогтолцоо (%n боломжтой)
-
+
Select layer(s)
Давхарга (ууд) Сонгох
-
- Failed to parse WMS URI
-
-
- Failed to download capabilities:
-
-
-
- The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
-
- Instead of the capabilities string that was expected, the following response has been received:
-
-%1
-
-
- Options (%n coordinate reference systems available)
- crs count
-
-
-
Select layer(s) or a tileset
-
Select either layer(s) or a tileset
-
+
+ Coordinate Reference System (%n available)
+ crs count
+ Солбицлын Тогтолцоо (%n боломжтой)
No common CRS for selected layers.
-
No CRS selected
-
No image encoding selected
-
%n Layer(s) selected
selected layer count
-
-
+
Tileset selected
-
Could not understand the response. The %1 provider said:
%2
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
The %1 connection already exists. Do you want to overwrite it?
-
Confirm Overwrite
-
QgsWMSSourceSelectBase
- Add Layer(s) from a Server
- Ёерверээс дэвхарга нэмэх
+ Ready
+ Бэлэн
- Save connections to file
- Холболтыг файл болгон хадгалах
+ Layers
+ Давхарга
C&onnect
Х&олбох
-
- Add Layer(s) from a WM(T)S Server
-
&New
@@ -56585,12 +50750,12 @@ Error was:%2
Adds a few example WMS servers
- WMS серверийн жишээ нэсэх
+
Add default servers
-
Abstract
Товчлол
+
+ Image encoding
+
+
+ Save connections to file
+
Save
@@ -56630,20 +50805,45 @@ Error was:%2
Load
Дуудах
+
+ Options
+ Сонголт
+
+
+ Layer name
+ Давхаргын нэр
+
+
+ Coordinate Reference System
+
+
+ Add Layer(s) from a WM(T)S Server
+
+
+ Change ...
+ Өөрчлөх ...
+
Tile size
-
Feature limit for GetFeatureInfo
-
10
- 10
+
Move selected layer UP
-
Up
- Дээшээ
+
Move selected layer DOWN
-
Down
- Доошоо
+
Tilesets
-
-
- Styles
- Загварууд
-
-
- Size
- Хэмжээ
+
Tileset
-
CRS
-
Server Search
-
Search
Хайх
-
- URL
- URL
-
Description
Тайлбар
+
+ URL
+ URL
+
Add selected row to WMS list
-
-
- Image encoding
- Дүрс коодлох
-
-
- Layers
- Давхарга
-
-
- Options
- Сонголт
-
-
- Layer name
- Давхаргын нэр
-
-
- Coordinate Reference System
- Солбицолын Лавлах Систем
-
-
- Change ...
- Өөрчлөх ...
-
-
- Ready
- Бэлэн
+
@@ -56776,49 +50933,49 @@ Error was:%2
empty capabilities document
-
Tried URL: %1
-
Capabilities request redirected.
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
WCS
-
%1 of %2 bytes of capabilities downloaded.
-
Exception
- Хасалт
+
Could not get WCS capabilities: %1
-
Dom Exception
-
Version not supported
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -56864,7 +51021,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
-
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -56941,7 +51098,27 @@ Response was:
Cannot describe coverage
-
+
+ Coverage not found
+
+
+ Cannot calculate extent
+
+
+ Cannot get test dataset.
+
+
+ Received coverage has wrong extent %1 (expected %2)
+
WCS
-
-
- Coverage not found
-
-
- Cannot calculate extent
-
-
- Cannot get test dataset.
-
-
- Received coverage has wrong extent %1 (expected %2)
-
Rotating raster
-
Block read OK
-
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
Getting map via WCS.
-
No data received
-
Cannot create memory file
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request is for a Coverage not offered by the service instance.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
- GetCapabilities шаардлага дахь UpdateSequence үзүүлэлтийн утга нь одоогийн үйлчилгээний метадатаг шинэчлэх дарааллын дугаартай тэнцүү байна.
+
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
- GetCapabilities-д шаардагдах ДараалалӨөрчлөх-ийн утга нь одоогийн үйлчилгээний метадатаг шинэчлэх дарааллын дугаараас их байна.
+
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
(No error code was reported)
-
(Unknown error code)
-
The WCS vendor also reported:
-
composed error message '%1'.
-
Cannot verify coverage full extent: %1
-
Property
- Мөнчанар
+
Value
- Утга
+
Name (identifier)
-
Title
- Гарчиг
+
Abstract
-
Fixed Width
- Тогтсон Өргөн
+
Fixed Height
- Тогтсон Өндөр
+
Native CRS
-
Native Bounding Box
-
WGS 84 Bounding Box
- WGS 84 Bounding Box
+
Available in CRS
- CRS-д байгаа
+
(and %n more)
crs
-
-
+
Available in format
-
Coverages
-
Cache Stats
-
Server Properties
-
Keywords
- Түлхүүр үгс
+
Online Resource
- Интернэт дэх Нөөц
+
Contact Person
- Харилцах Хүн
+
Fees
- Төлбөр
+
Access Constraints
- Хандах Constraints
+
Image Formats
- Дүрсийн Формат
+
GetCapabilitiesUrl
-
Get Coverage Url
-
<font color="red">(advertised but ignored)</font>
-
And %1 more coverages
-
Format not supported
-
Read data error
-
RasterIO error:
-
@@ -57256,12 +51410,12 @@ Response was:
...
- ...
+
Select a file
-
@@ -57269,22 +51423,22 @@ Response was:
Form
-
Field contains a filename or URL for a webpage
-
Width
- Өргөн
+
Height
- Өндөр
+
@@ -57292,33 +51446,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
-
Capabilities request redirected.
-
Redirect loop detected: %1
-
WMS
- WMS
+
empty of capabilities: %1
-
Download of capabilities failed: %1
-
@@ -57326,7 +51480,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
QgsWmsProvider
- This is probably due to an incorrect WMS Server URL.
- WMS-Server URL буруу байснаас болсон байж магад.
+ Cannot parse URI
+
- Could not get WMS Service Exception at %1: %2 at line %3 column %4
- %1-ээс WMS Service Exception авсангүй: %3 шугам дээр %2, багана %4
+ Cannot calculate extent
+
- Request contains a Format not offered by the server.
- Шаардлага дотор сэрвэрийн өгөхгүй Формат байна.
+ Cannot set CRS
+
+
+ Number of layers and styles don't match
+
+
+ WMS
+
+
+ Number of tile layers must be one
+
+
+ Tile layer not found
+
+
+ Tile layer or tile matrix set not found
+
+
+ Getting map via WMS.
+
+
+ Getting tiles.
+
+
+ %n tile requests in background
+ tile request count
+
+
+ , %n cache hits
+ tile cache hits
+
+
+ , %n cache misses.
+ tile cache missed
+
+
+ , %n errors.
+ errors
+
+
+ image is NULL
+
+
+ unexpected image size
+
+
+ Status: %1
+Reason phrase: %2
+
+
+ Redirect loop detected: %1
+
+
+ Dom Exception
+
+
+ Service Exception
+
+
+ Request contains a format not offered by the server.
+
GetFeatureInfo request contains invalid X or Y value.
GetFeatureInfo шаардлагад X буюу Y алдаатай байна.
+
+ Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
+ GetCapabilities шаардлага дахь UpdateSequence үзүүлэлтийн утга нь одоогийн үйлчилгээний метадатаг шинэчлэх дарааллын дугаартай тэнцүү байна.
+
+
+ Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
+ GetCapabilities-д шаардагдах ДараалалӨөрчлөх-ийн утга нь одоогийн үйлчилгээний метадатаг шинэчлэх дарааллын дугаараас их байна.
+
Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
@@ -57428,6 +51697,16 @@ Response was:
Request is for an optional operation that is not supported by the server.
Шаардлага нь сэрвэрийн дэмжихгүй нэмэлт үйлдэлд зориулагджээ.
+
+ (No error code was reported)
+
+
+ (Unknown error code)
+
The WMS vendor also reported:
@@ -57450,9 +51729,25 @@ Response was:
Утга
- WMS Version
- WMS Хувилбар
+ Name
+ Нэр
+
+
+ Visibility
+ Үзэгдэх
+
+
+ Visible
+ Ил
+
+
+ Hidden
+ Далд
Title
Гарчиг
-
- Cannot parse URI
-
-
- Cannot calculate extent
-
-
- Cannot set CRS
-
-
- Number of tile layers must be one
-
-
- Tile layer not found
-
-
- Tile layer or tile matrix set not found
-
-
- Status: %1
-Reason phrase: %2
-
-
- Redirect loop detected: %1
-
-
- Service Exception
-
-
- Request contains a format not offered by the server.
-
Abstract
Товчлол
+
+ Can Identify
+ Тодорхойлж Болно
+
+
+ Yes
+ Тийм
+
+
+ No
+ Үгүй
+
+
+ Can be Transparent
+ Нэвт Харагдана
+
+
+ Can Zoom In
+ Томсгож Болно
+
+
+ Cascade Count
+ Cascade Тоо
+
+
+ Fixed Width
+ Тогтсон Өргөн
+
+
+ Fixed Height
+ Тогтсон Өндөр
+
+
+ Available in CRS
+
+
+ (and %n more)
+ crs
+
+
+ Available in style
+ Загвар байгаа
+
LegendURLs
-
+
+ Server Properties
+
+
+ Selected Layers
+
+
+ Other Layers
+
Tile Layer Properties
-
+
+ Cache Stats
+
+
+ WMS Version
+ WMS Хувилбар
Tile Layer Count
-
+
+ GetCapabilitiesUrl
+
+
+ GetMapUrl
+
+
+ <font color="red">(advertised but ignored)</font>
+
+
+ GetFeatureInfoUrl
+
GetLegendGraphic
-
GetTileUrl
-
Tile templates
-
FeatureInfo templates
-
+
+ Tileset Properties
+
Identifier
-
Tile mode
-
WMTS
-
WMS-C
-
Invalid tile mode
-
Сонгосон
- Selected tile matrix set
-
-
- Scale
- Масштаб
-
-
- Tile size [px]
-
-
- Tile size [mu]
-
-
- Matrix size
-
-
- Matrix extent [mu]
-
-
- Bounds
-
-
- Width
- Өргөн
-
-
- Height
- Өндөр
-
-
- Top
- Дээд
-
-
- Left
- Зүүн
-
-
- Bottom
- Доод
-
-
- Right
- Баруун
-
-
- %n missing row(s)
-
-
-
-
- Layer's upper bound: %1
-
-
- %n missing column(s)
-
-
-
-
- Layer's left bound: %1
-
-
- Layer's lower bound: %1
-
-
- Layer's right bound: %1
-
-
- Context not fully specified (extent was defined but width and/or height was not).
-
-
- Cannot identify
-
-
- Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
-
- Cannot parse getfeatureinfo: %1
-
-
- GetLegendGraphic request redirected.
-
-
- GetLegendGraphic request error
-
-
- Returned legend image is flawed [URL: %1]
-
-
- Download of GetLegendGraphic failed: %1
-
-
- %1 of %2 bytes of GetLegendGraphic downloaded.
-
-
- Yes
- Тийм
-
-
- No
- Үгүй
-
-
- Visibility
- Үзэгдэх
-
-
- Number of layers and styles don't match
-
-
- Getting tiles.
-
-
- Visible
- Ил
-
-
- Hidden
- Далд
-
-
- Can Identify
- Тодорхойлж Болно
-
-
- Can be Transparent
- Нэвт Харагдана
-
-
- Can Zoom In
- Томсгож Болно
-
-
- Cascade Count
- Cascade Тоо
-
-
- Fixed Width
- Тогтсон Өргөн
-
-
- Fixed Height
- Тогтсон Өндөр
-
-
- WGS 84 Bounding Box
- WGS 84 Bounding Box
-
-
- Available in CRS
- CRS-д байгаа
-
-
- Available in style
- Загвар байгаа
-
-
- Name
- Нэр
-
-
- Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
- GetCapabilities шаардлага дахь UpdateSequence үзүүлэлтийн утга нь одоогийн үйлчилгээний метадатаг шинэчлэх дарааллын дугаартай тэнцүү байна.
-
-
- Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
- GetCapabilities-д шаардагдах ДараалалӨөрчлөх-ийн утга нь одоогийн үйлчилгээний метадатаг шинэчлэх дарааллын дугаараас их байна.
-
-
- Styles
- Загвар
+ Available Styles
+
CRS
-
Bounding Box
-
+
+ Available Tilesets
+
+
+ Selected tile matrix set
+
+
+ Scale
+
+
+ Tile size [px]
+
+
+ Tile size [mu]
+
+
+ Matrix size
+
+
+ Matrix extent [mu]
+
+
+ Bounds
+
+
+ Width
+
+
+ Height
+
+
+ Top
+
+
+ Left
+
+
+ Bottom
+
+
+ Right
+
+
+ %n missing row(s)
+
+
+ Layer's upper bound: %1
+
+
+ %n missing column(s)
+
+
+ Layer's left bound: %1
+
+
+ Layer's lower bound: %1
+
+
+ Layer's right bound: %1
+
+
+ Cache stats
+
Hits
-
Misses
-
Errors
Алдаанууд
-
- Dom Exception
-
-
- WMS
- WMS
-
-
- Getting map via WMS.
-
-
- %n tile requests in background
- tile request count
-
-
-
-
- , %n cache hits
- tile cache hits
-
-
-
-
- , %n cache misses.
- tile cache missed
-
-
-
-
- , %n errors.
- errors
-
-
-
-
- image is NULL
-
-
- unexpected image size
-
-
- (No error code was reported)
-
-
- (Unknown error code)
-
-
- (and %n more)
- crs
-
-
-
-
- Server Properties
-
-
- Selected Layers
-
-
- Other Layers
-
-
- Tileset Properties
-
-
- Cache Stats
-
-
- GetCapabilitiesUrl
-
-
- GetMapUrl
-
-
- <font color="red">(advertised but ignored)</font>
-
-
- GetFeatureInfoUrl
-
-
- Available Styles
-
-
- Available Tilesets
-
-
- Cache stats
-
Format not supported
-
+
+ Context not fully specified (extent was defined but width and/or height was not).
+
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
GML schema is not valid
-
GML is not valid
-
+
+ Cannot identify
+
+
+ Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
+
identify request redirected.
-
Map getfeatureinfo error %1: %2
-
+
+ Cannot parse getfeatureinfo: %1
+
Map getfeatureinfo error: %1 [%2]
-
+
+ GetLegendGraphic request redirected.
+
+
+ GetLegendGraphic request error
+
+
+ Returned legend image is flawed [URL: %1]
+
+
+ Download of GetLegendGraphic failed: %1
+
+
+ %1 of %2 bytes of GetLegendGraphic downloaded.
+
@@ -58107,18 +52220,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
QgsWmtsDimensionsBase
-
- Dialog
- Харилцах цонх
-
Select dimensions
-
Dimension
-
Value
- Утга
+
Abstract
-
Default
- Өгөгдмөл
+
@@ -58250,16 +52347,12 @@ Reason phrase: %2
QgsZonalStatisticsPlugin
-
- &Zonal statistics...
- &Бүсийн статистик...
-
&Zonal statistics
-
Зогсоох...
-
- QuickPrintGuiBase
-
- Map name
- Зургийн нэр
-
-
- Output
- Гаралт
-
-
RecordDialog
Record Metadata
-
@@ -58314,97 +52396,93 @@ Reason phrase: %2
Transportation layer
-
Layer
- Давхарга
+
Direction field
-
-
- Reverse direction
-
Value for forward direction
-
Value for reverse direction
-
Value two-way direction
-
Speed field
-
-
- Default settings
-
-
- Direction
-
-
- Two-way direction
-
-
- Forward direction
-
-
- Cost
-
-
- Line lengths
-
-
- Speed
-
-
- Units
- Нэгж
+
km/h
-
m/s
-
+
+ Default settings
+
+
+ Direction
+
+
+ Two-way direction
+
+
+ Forward direction
+
+
+ Reverse direction
+
+
+ Cost
+
+
+ Line lengths
+
+
+ Speed
+
Always use default
-
@@ -58412,7 +52490,7 @@ Reason phrase: %2
Road graph plugin settings
-
Topology tolerance
-
Shortest path
-
Start
-
Stop
- Зогсоох
+
Criterion
-
Length
- Урт
+
Time
-
Calculate
- Berechnen
+
Export
- Гаргах
+
Clear
- Цэвэрлэх
+
Help
- Туслах
+
Point not selected
-
First, select start and stop points.
-
Plugin isn't configured
-
Plugin isn't configured!
-
Tie point failed
-
Start point doesn't tie to the road!
-
Stop point doesn't tie to the road!
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
Path not found
-
RoadGraphPlugin
-
- About
- Тухай
-
Settings
-
Road graph plugin settings
-
Road graph
-
-
- Close
- Хаах
-
-
-
- SEXTANTE
-
- Analysis
- Дун шинжилгээ
+
SLDatabase
Run &Vacuum
-
&Database
- &Өгөгдлийн сан
+
Sorry
-
No database selected or you are not connected to it.
-
SaDbTableModel
+ Schema
- Бүдүүвч
+ Бүдүүвч
+ Table
- Хүснэгт
+ Хүснэгт
+ Type
- Төрөл
+ Төрөл
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Шулууны тайлал
+
+ Geometry column
- Геометр багана
+ Геометр багана
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Холболтыг хадгалах
+ Холболтыг хадгалах
+ Should the existing connection %1 be overwritten?
+
+
+ Failed to load interface
+
+
+ Test connection
- Холболтыг шалгах
+ Холболтыг шалгах
+ Connection to %1 was successful
- %1 -д амжилттай холбогдлоо
+ %1 -д амжилттай холбогдлоо
+
+
+ Connection failed. Check settings and try again.
+
+SQL Anywhere error code: %1
+Description: %2
+
SaNewConnectionBase
+ Create a new SQL Anywhere connection
+
+
+ Connection Information
- Холболтын мэдээлэл
+ Холболтын мэдээлэл
+ Name
- Нэр
+ Нэр
+ Host
- Толгой компьютер
+ Толгой компьютер
+ Port
- Порт
+ Порт
+ Server
- Сервер
+ Сервер
+ Database
- Өгөгдлийн сан
+ Өгөгдлийн сан
+ Connection Parameters
- Ө.сангийн параметр
+ Ө.сангийн параметр
+ Username
- Хэрэглэгчийн нэр
+ Хэрэглэгчийн нэр
+ Password
- Нэвтрэх үг
+ Нэвтрэх үг
+ Name of the new connection
- Шинэ холболтын нэр
+ Шинэ холболтын нэр
+ Name or IP address of computer hosting the database server (leave blank for local connections)
+
+
+ Port number used by the database server (leave blank for default 2638)
+
+
+ Name of the database server (leave blank for default server on host)
- Өгөгдлийн сангийн серверийн нэр
+
+ Name of the database (leave blank for default database on server)
+
+
+ Additional connection parameters
- Нэмэлт холболтын параметрүүд
+ Нэмэлт холболтын параметрүүд
+ Database username
- Өгөгдлийн сангийн хэрэглэгчийн нэр
+ Өгөгдлийн сангийн хэрэглэгчийн нэр
+ Database password
- Нэвтрэх нууц үг
+ Нэвтрэх нууц үг
+ Save the connection username in the registry
+
+
+ Save Username
- Хэрэглэгчийн нэрийг санах
+ Хэрэглэгчийн нэрийг санах
+ &Test Connect
- &Холболтыг шалгах
+ &Холболтыг шалгах
+ Save the connection password in the registry (WARNING: NOT SECURE)
+
+
+ Save Password
- Нэвтрэх нууц үг санах
-
-
-
- SaQueryBuilder
-
- &Test
- &Шалгах
+ Нэвтрэх нууц үг санах
- &Clear
- &Цэвэрлэх
+ Encrypt packets using simple encryption
+
- Query Result
- Хүсэлтийн Дүн
+ Simple Encryption
+
- Query Failed
- Хүсэлт Бүтэлгүйтэв
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
+
+
+ Estimate table metadata
+
+
+ Search for geometry columns in tables owned by other users
+
+
+ Search other users' tables
+
SaSourceSelect
+ &Add
- &Нэмэх
+ &Нэмэх
+ &Set Filter
+
+
+ Wildcard
+
+
+ RegExp
+
+
+ All
- Бүгд
+ Бүгд
+ Schema
- Бүдүүвч
+
+ Table
- Хүснэгт
+ Хүснэгт
+ Type
- Төрөл
+ Төрөл
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Шулууны тайлал
+
+ Geometry column
- Геометр багана
+ Геометр багана
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Та [%1] холболтыг түүний тохиргоотой хамт устгахдаа итгэлтэй байна уу?
+
+ Confirm Delete
- Хасахаа Баталгаажуулах
+
+ Select Table
- Хүснэгт Сонгох
+ Хүснэгт Сонгох
+ You must select a table in order to add a layer.
+
+
+ Failed to load interface
+
+
+ Connection failed
- Холболт амжилтгүй
+ Холболт амжилтгүй
+
+
+ Connection to database %1 failed. Check settings and try again.
+
+SQL Anywhere error code: %2
+Description: %3
+
+
+ No accessible tables found
+
+
+ Database connection was successful, but no tables containing geometry columns were %1.
+
+
+ found
+
+
+ found in your schema
+
SaSourceSelectBase
+ Add SQL Anywhere layer
+
+
+ SQL Anywhere Connections
+
+
+ Delete
- Устгах
+ Устгах
+ Edit
- Засах
+ Засах
+ New
- Шинэ
+ Шинэ
+ Connect
- Холбох
+ Холбох
+ Search options
- Хайлтын тохиогоо
+ Хайлтын тохиогоо
+ Search
- Хайх
+ Хайх
+ Search mode
+
+
+ Search in columns
- Баганад хайх
+ Баганад хайх
+
+
+
+ SaveAsPythonScriptAction
+
+ I/O error
+
+
+ Unable to save edits. Reason:
+ %s
+
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
-
I/O error
-
Unable to save edits. Reason:
%s
-
@@ -58860,18 +53120,13 @@ Reason phrase: %2
Select Oracle Spatial GeoRaster
-
Server Connections
Серверийн Холболт
-
- C&onnect
- Х&олбох
-
Edit
@@ -58887,6 +53142,16 @@ Reason phrase: %2
&New
&Шинэ
+
+ C&onnect
+ Х&олбох
+
+
+ Subdatasets
+
Selection
@@ -58902,264 +53167,237 @@ Reason phrase: %2
Ready
Бэлэн
-
- Subdatasets
-
-
-
- SelectionFeature
-
- vertex %1
- оройн цэг %1
-
-
- point %1
- цэг %1
-
-
- Node tool
- Зангилаа цэгийн хэрэгсэл
-
SettingsDialogPythonConsole
Editor
-
Auto-save script before running
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
-
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Font
- Үсгийн хэв
+
Size
- Хэмжээ
+
Enable Object Inspector (switching between tabs may be slow)
-
Console
-
APIs
-
Using preloaded APIs file
-
Path
-
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
-
-
- SextanteToolbox
-
- Warning
- Анхааруулга
+
@@ -59167,12 +53405,12 @@ Reason phrase: %2
Simplify line tolerance
-
Set tolerance
-
SqlAnywhere
- Invalid Layer
- Буруу Давхарга
+ Add SQL Anywhere Layer...
+
+ Store vector layers within a SQL Anywhere database
+
+
+ Invalid Layer
+ Буруу Давхарга
+
+
+ %1 is an invalid layer and cannot be loaded.
- %1 алдаатай давхарга тул ачаалагдахгүй.
+ %1 алдаатай давхарга тул ачаалагдахгүй.
@@ -59196,74 +53446,62 @@ Reason phrase: %2
Form
-
Unit
-
-
- Millimeter
- Миллметр
+
Opacity
-
Color
- Өнгө
-
-
- Symbol
- Тэмдэг
-
-
- Size
- Хэмжээ
-
-
- Rotation
- Эргэлт
-
-
- °
- °
-
-
- Width
- Өргөн
-
-
- Symbols in group
-
Open Library
-
+
+ Size
+
+
+ Rotation
+
+
+ °
+
+
+ Width
+
+
+ Symbols in group
+
Symbol Name
-
-
- Style
- Загвар
+
Advanced
- Нэмэлт
+
@@ -59271,18 +53509,18 @@ Reason phrase: %2
TopologyChecker
-
Topology Checker for vector layer
-
&Topology Checker
-
@@ -59307,7 +53545,7 @@ Reason phrase: %2
ValidateDialog
Check geometry validity
-
Geometry errors
@@ -59331,7 +53569,7 @@ Reason phrase: %2
Please specify output shapefile
- Гаралтын ажлыг зааж өгнө үү
+
Cancel
@@ -59339,22 +53577,22 @@ Reason phrase: %2
Geometry
- Геометр
+
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Feature
- Объект
+
Error(s)
@@ -59389,11 +53627,11 @@ Reason phrase: %2
Basics statistics
-
Statistics output
-
Nearest neighbour analysis
@@ -59426,15 +53664,7 @@ Reason phrase: %2
Force point inside polygon
-
-
- Marker
- Тэмдэглэгч
-
-
- Change
- Өөрчлөх
+
@@ -59442,112 +53672,92 @@ Reason phrase: %2
Form
-
-
- Settings
- Тохируулга
-
-
- Border color
- Хүрээний өнгө
-
-
- Fill color
- Дүүргэх өнгө
+
Colors
- Өнгө
+
Fill
-
Border
-
-
- Symbol width
-
-
- Millimeter
- Миллметр
+
Left
- Зүүн
+
HCenter
-
Right
- Баруун
+
Top
- Дээд
+
VCenter
-
Bottom
- Доод
+
Outline style
-
Outline width
- Хүрээний өргөн
-
-
- Symbol height
-
-
- Anchor point
-
-
- Data defined properties...
-
-
- Offset X,Y
-
Rotation
- Эргэлт
+
- Shape
- Дүрс
+ Anchor point
+
+
+ Data defined properties...
+
+
+ Offset X,Y
+
+
+ Symbol width
+
+
+ Symbol height
+
@@ -59558,18 +53768,49 @@ Reason phrase: %2
Форм
- Font family
- Үсгийн хэлбэр
+ Offset X,Y
+
- Color
- Өнгө
+ Rotation
+ Эргэлт
- Change
- Өөрчлөх
+ Anchor point
+
+
+ Left
+
+
+ HCenter
+
+
+ Right
+
+
+ Top
+
+
+ VCenter
+
+
+ Bottom
+
Хэмжээ
- Millimeter
- Миллметр
+ Color
+ Өнгө
- Rotation
- Эргэлт
+ Font family
+ Үсгийн хэлбэр
°
°
-
- Offset X,Y
-
-
- Anchor point
-
-
- Left
- Зүүн
-
-
- HCenter
-
-
- Right
- Баруун
-
-
- Top
- Дээд
-
-
- VCenter
-
-
- Bottom
- Доод
-
WidgetGradientFill
Form
-
Two color
-
Color ramp
-
Gradient type
-
Linear
- Шугаман
+
Radial
-
Conical
-
Coord mode
-
Object
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
x
- x
+
y
- y
+
Feature centroid
-
Reference Point 2
-
Angle
- Өнцөг
+
°
-
Data defined properties...
-
-
- Millimeter
- Миллметр
+
Offset X,Y
-
-
-
- WidgetLineDecoration
-
- Form
- Форм
-
-
- Color
- Өнгө
-
-
- Millimeter
- Миллметр
-
-
- Change
- Өөрчлөх
-
-
- Pen width
- Өргөн
+
@@ -59784,43 +53959,27 @@ Reason phrase: %2
Form
-
Angle
- Өнцөг
-
-
- Distance
-
-
- Millimeter
- Миллметр
-
-
- Line width
- Шугамын өргөн
-
-
- Color
- Өнгө
+
Data defined properties...
-
- Outline
- Хүрээ
+ Distance
+
Offset
-
@@ -59830,32 +53989,15 @@ Reason phrase: %2
Form
Форм
-
- Marker
- Тэмдэглэгч
-
-
- Line offset
-
-
- Change
- Өөрчлөх
-
Marker placement
-
with interval
-
-
- Millimeter
- Миллметр
+
Offset along line
-
Rotate marker
-
+
+ Line offset
+
Data defined properties
-
Form
- Форм
-
-
- Marker
- Тэмдэглэгч
-
-
- Change
- Өөрчлөх
-
-
- Horizontal distance
- Хэвтээ зай
-
-
- Millimeter
- Миллметр
+
Vertical distance
Босоо зай
-
- Horizontal displacement
- Хэвтээ шилжилт
-
Vertical displacement
@@ -59935,7 +54060,17 @@ Reason phrase: %2
Data defined properties...
-
+
+ Horizontal displacement
+ Хэвтээ шилжилт
+
+
+ Horizontal distance
+ Хэвтээ зай
@@ -59946,69 +54081,49 @@ Reason phrase: %2
Форм
- Texture width
-
-
- Millimeter
- Миллметр
+ Border width
+
Rotation
Эргэлт
+
+ Texture width
+
Colors
- Өнгө
+
Fill
-
Border
-
Data defined properties...
-
-
- Color
- Өнгө
-
-
- Border color
- Хүрээний өнгө
-
-
- Border width
- Хүрээний өргөн
-
-
- Outline
- Хүрээ
-
-
- Change
- Өөрчлөх
+
SVG Groups
-
SVG Symbols
-
Form
-
Gradient colors
-
Two color
-
Color ramp
-
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
-
- Millimeter
- Миллметр
+
Blur strength
-
Offset X,Y
-
Data defined properties...
-
@@ -60086,22 +54197,24 @@ Reason phrase: %2
Форм
- Color
- Өнгө
+ Offset X,Y
+
+
+ Border width
+ Хүрээний өргөн
Fill style
Будах хэлбэр
-
- Border color
- Хүрээний өнгө
-
Colors
- Өнгө
+
Join style
- Нэгтгэх хэлбэр
-
-
- Border width
- Хүрээний өргөн
-
-
- Millimeter
- Миллметр
-
-
- Offset X,Y
-
Data defined properties...
-
Fill
-
Border
-
-
- Change
- Өөрчлөх
+
@@ -60159,19 +54254,20 @@ Reason phrase: %2
Color
Өнгө
+
+ Change
+ Өөрчлөх
+
Pen width
Зурах өргөн
-
- Millimeter
- Миллметр
-
Offset
-
Cap style
-
-
- Change
- Өөрчлөх
-
-
- Dash pattern unit
-
-
- Data defined properties...
-
-
- Draw line only inside polygon
-
Use custom dash pattern
-
+
+ Dash pattern unit
+
+
+ Data defined properties...
+
+
+ Draw line only inside polygon
+
@@ -60221,42 +54312,75 @@ Reason phrase: %2
Form
Форм
-
- Border color
- Хүрээний өнгө
-
-
- Fill color
- Дүүргэх өнгө
-
-
- Fill
-
-
- Border
-
Size
Хэмжээ
- Millimeter
- Миллметр
+ Fill
+
+
+ Border
+
Outline style
-
Outline width
- Хүрээний өргөн
+
+
+ Anchor point
+
+
+ Left
+
+
+ HCenter
+
+
+ Right
+
+
+ Top
+
+
+ VCenter
+
+
+ Bottom
+
+
+ Data defined properties...
+
+
+ Colors
+
°
-
Offset X,Y
-
-
- Anchor point
-
-
- Left
- Зүүн
-
-
- HCenter
-
-
- Right
- Баруун
-
-
- Top
- Дээд
-
-
- VCenter
-
-
- Bottom
- Доод
-
-
- Data defined properties...
-
-
- Colors
- Өнгө
-
-
- Change
- Өөрчлөх
+
@@ -60331,13 +54406,69 @@ Reason phrase: %2
Форм
- Size
- Хэмжээ
+ Colors
+
- Millimeter
- Миллметр
+ Fill
+
+
+ Border
+
+
+ Offset X,Y
+
+
+ Anchor point
+
+
+ Left
+
+
+ HCenter
+
+
+ Right
+
+
+ Top
+
+
+ VCenter
+
+
+ Bottom
+
+
+ Data defined properties...
+
+
+ Border width
+
Өнцөг
- Colors
- Өнгө
-
-
- Fill
-
-
- Border
-
-
- Offset X,Y
-
-
- Anchor point
-
-
- Left
- Зүүн
-
-
- HCenter
-
-
- Right
- Баруун
-
-
- Top
- Дээд
-
-
- VCenter
-
-
- Bottom
- Доод
-
-
- Data defined properties...
-
-
- Color
- Өнгө
-
-
- Border width
- Хүрээний өргөн
-
-
- Border color
- Хүрээний өнгө
+ Size
+ Хэмжээ
SVG Groups
-
...
- ...
+
@@ -60438,32 +54501,32 @@ Reason phrase: %2
Form
-
SVG Images
-
SVG Groups
-
...
- ...
+
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
-
@@ -60471,81 +54534,77 @@ Reason phrase: %2
Form
-
-
- X attribute
-
Y attribute
-
Scale
- Масштаб
+
+
+ X attribute
+
Vector field type
-
-
- Cartesian
-
-
- Polar
-
-
- Distance unit
- Зайн нэгж
-
-
- Millimeter
- Миллметр
+
Height only
-
+
+ Polar
+
+
+ Cartesian
+
Angle units
-
Degrees
- Градус
+
Radians
- Радиан
+
Angle orientation
-
Counterclockwise from east
-
Clockwise from north
-
+
+ Distance unit
+
@@ -60553,17 +54612,17 @@ Reason phrase: %2
XML Request / Response
-
Request
-
Response
-
@@ -60584,59 +54643,59 @@ Reason phrase: %2
Topology Checker
-
Validate All
-
Validate Extent
-
Topology not checked yet
-
Configure
-
Show topology errors
-
Show errors
-
Select automatic fix
-
Fix!
-
No errors were found
-
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
Abort
-
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -60846,7 +54905,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -60856,7 +54915,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -62292,56 +56429,56 @@ Click on one of the icons along the top of the composer window to select what ty
dxf2shpConverterGui
-
- Polygon
- Олонталт
-
-
- Point
- Цэг
-
Dxf Importer
-
Input and output
-
Input DXF file
-
...
- ...
+
Output file
- Гаралтын ажил
-
-
- Output file type
-
-
- Polyline
-
Export text labels
-
+
+ Output file type
+
+
+ Polyline
+
+
+ Polygon
+
+
+ Point
+
Please specify a file to convert.
-
Please specify an output file
-
Choose a DXF file to open
-
DXF files
-
-
- Shapefile
-
Choose a file name to save to
-
+
+ Shapefile
+
@@ -62405,27 +56542,27 @@ For support send a mail to scala@itc.cnr.it
eVis Event Id Tool
-
eVis Event Browser
-
Create layer from a database query
-
Open an Event Browers and display the selected feature
-
Open an Event Browser to explore the current layer's features
-
@@ -62434,12 +56571,12 @@ For support send a mail to scala@itc.cnr.it
Undefined
-
No predefined queries loaded
-
Open File
- Ажил нээх
+
New Database connection requested...
-
Error: You must select a database type
-
Error: No host name entered
-
Error: No database name entered
-
Connection to [%1.%2] established
-
-
- Connection to [%1.%2] failed: %3
-
-
- Error: Unabled to open file [%1]
-
-
- Error: Query failed: %1
-
-
- Error: Could not create temporary file, process halted
-
connected
- холбогдсон
+
Tables
-
+
+ Connection to [%1.%2] failed: %3
+
Error: Parse error at line %1, column %2: %3
-
+
+ Error: Unabled to open file [%1]
+
+
+ Error: Query failed: %1
+
+
+ Error: Could not create temporary file, process halted
+
Error: A database connection is not currently established
-
@@ -62522,145 +56659,145 @@ For support send a mail to scala@itc.cnr.it
Database Connection
-
- Load predefined queries
-
-
- Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide.
-
-
- The description of the selected query.
-
Predefined Queries
-
+
+ Load predefined queries
+
+
+ Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide.
+
+
+ The description of the selected query.
+
Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
-
not connected
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
-
Database Host
-
Enter the database host. If the database resides on your desktop you should enter ¨localhost¨. If you selected ¨MSAccess¨ as the database type this option will not be available.
-
Password to access the database.
-
Enter the name of the database.
-
Username
- Хэрэглэгчийн нэр
+
Enter the port through which the database must be accessed if a MYSQL database is used.
-
Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established.
-
Connect
- Холбох
+
User name to access the database.
-
Select the type of database from the list of supported databases in the drop-down menu.
-
Database Name
-
Password
- Нэвтрэх үг
+
Database Type
-
Port
- Порт
+
SQL Query
-
Run the query entered above. The status of the query will be displayed in the Output Console below.
-
Run Query
-
Enter the query you want to run in this window.
-
A window for status messages to be displayed.
-
Output Console
-
@@ -62706,17 +56843,17 @@ p, li { white-space: pre-wrap; }
Generic Event Browser
-
Field
- Талбар
+
Value
- Утга
+
This tool only supports vector data
- Энэ хэрэгсэл нь зөвхөн Вектор өгөдөлд зориулагдсан
+
No active layers found
- Идэвхтэй давхарга олдсонгүй
+
Error
- Алдаа
+
Unable to connect to either the map canvas or application interface
-
An invalid feature was received during initialization
-
Event Browser - Displaying records 01 of %1
-
+
+ Attribute Contents
+
Event Browser - Displaying records %1 of %2
-
-
- Attribute Contents
-
Select Application
-
All ( * )
-
@@ -62791,17 +56928,17 @@ p, li { white-space: pre-wrap; }
Use the Previous button to display the previous photo when more than one photo is available for display.
-
Previous
-
Use the Next button to display the next photo when more than one photo is available for display.
-
All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green.
-
Image display area
-
Display area for the image.
-
Options
Сонголтууд
-
- Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
-
-
- If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
-
-
- If checked, the relative path values will be saved for the next session.
-
-
- Reset to default
-
-
- Resets the values on this line to the default setting.
-
-
- If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
-
-
- Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
-
-
- If checked, the Display Compass Bearing values will be saved for the next session.
-
-
- A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
-
- Define the compass offset using a field from the vector layer attribute table.
-
-
- From Attribute
- Атрибутаас
-
-
- Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
-
- Define the compass offset manually.
-
-
- Manual
- Гараар
-
-
- If checked, the compass offset values will be saved for the next session.
-
-
- Resets the compass offset values to the default settings.
-
-
- The base path or url from which images and documents can be “relative”
-
-
- Base Path
-
-
- Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
-
-
- If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
-
-
- The Base Path onto which the relative path defined above will be appended.
-
File path
@@ -62953,12 +56978,27 @@ p, li { white-space: pre-wrap; }
Attribute containing path to file
-
+
+ Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
+
+
+ If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
+
Path is relative
-
+
+ If checked, the relative path values will be saved for the next session.
+
Remember this
Үүнийг санах
+
+ Reset to default
+
+
+ Resets the values on this line to the default setting.
+
Reset
-
Compass bearing
-
Attribute containing compass bearing
-
+
+ Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
+
+
+ If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
+
Display compass bearing
-
+
+ If checked, the Display Compass Bearing values will be saved for the next session.
+
Compass offset
-
+
+ Define the compass offset manually.
+
+
+ Manual
+ Гараар
+
+
+ A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
+
+
+ Define the compass offset using a field from the vector layer attribute table.
+
+
+ From Attribute
+ Атрибутаас
+
+
+ Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
+
+
+ If checked, the compass offset values will be saved for the next session.
+
+
+ Resets the compass offset values to the default settings.
+
Relative paths
-
+
+ The base path or url from which images and documents can be “relative”
+
+
+ Base Path
+
+
+ The Base Path onto which the relative path defined above will be appended.
+
If checked, the Base Path will be saved for the next session.
-
+
+ Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
+
If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
-
Replace entire path/url stored in image path attribute with user defined
Base Path (i.e. keep only filename from attribute)
-
If checked, the current check-box setting will be saved for the next session.
-
Clears the check-box on this line.
-
+
+ If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
+
Apply Path to Image rules when loading docs in external applications
-
Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
-
Configure External Applications
-
File extension and external application in which to load a document of that type
-
A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
-
Application
-
Add a new file type with a unique extension and the path for the application that can open the file.
-
Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
-
@@ -63125,8 +57262,8 @@ Base Path (i.e. keep only filename from attribute)
fTools
- Quantum GIS version detected:
- Quantum GIS хувилбар илэрлээ:
+ QGIS version detected:
+
This version of fTools requires at least QGIS version 1.0.0
@@ -63134,17 +57271,9 @@ Plugin will not be enabled.
Энэ fTools-ийн хувилбар нь QGIS 1.0.0-аас дээш хувилбарыг шаардаж байна
Өргөтгөл идэвхжихгүй.
-
- Vect&or
- Вект&oр
-
-
- QGIS version detected:
-
&Analysis Tools
-
Distance matrix
@@ -63180,7 +57309,7 @@ Plugin will not be enabled.
&Research Tools
-
Random selection
@@ -63188,7 +57317,7 @@ Plugin will not be enabled.
Random selection within subsets
-
Random points
@@ -63208,15 +57337,15 @@ Plugin will not be enabled.
Polygon from layer extent
-
&Geoprocessing Tools
-
Convex hull(s)
-
Buffer(s)
@@ -63232,11 +57361,11 @@ Plugin will not be enabled.
Symetrical difference
-
Clip
-
Dissolve
@@ -63248,31 +57377,31 @@ Plugin will not be enabled.
Eliminate sliver polygons
-
G&eometry Tools
-
Export/Add geometry columns
-
Check geometry validity
-
Polygon centroids
-
Delaunay triangulation
-
Voronoi Polygons
-
Extract nodes
@@ -63280,19 +57409,19 @@ Plugin will not be enabled.
Simplify geometries
-
Densify geometries
-
Multipart to singleparts
-
Singleparts to multipart
-
Polygons to lines
@@ -63300,37 +57429,37 @@ Plugin will not be enabled.
Lines to polygons
-
&Data Management Tools
-
Define current projection
-
Join attributes by location
- Байрлалаар нь хүснэгтүүдийг нэгтгэх
+
Split vector layer
-
Merge shapefiles to one
-
Create spatial index
-
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -63346,1857 +57475,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -65249,10 +59324,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -65266,10 +59341,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -65290,10 +59365,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -65306,12 +59381,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -65327,16 +59402,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -65365,15 +59440,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -65390,17 +59465,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -65414,17 +59489,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -65440,16 +59515,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -65463,10 +59538,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -65479,10 +59554,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -65496,12 +59571,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -65515,12 +59590,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -65535,17 +59610,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -65555,10 +59630,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -65573,12 +59648,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -65592,12 +59667,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -65611,10 +59686,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -65631,12 +59706,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -65650,17 +59725,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -65675,10 +59750,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -65689,12 +59764,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -65708,17 +59783,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -65731,12 +59806,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -65753,14 +59828,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -65774,15 +59849,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -65791,15 +59866,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -65830,14 +59905,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -65856,14 +59931,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -65968,12 +60043,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -65987,10 +60062,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -66004,10 +60079,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -66024,10 +60099,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -66043,9 +60118,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -66068,19 +60143,11 @@ Returns a string representation of a color based on its hue, saturation, value a
Point x ordinate
-
Point y ordinate
-
-
- Point x coordinate
- Цэгийн x солбицол
-
-
- Point y coordinate
- Цэгийн y солбицол
+
@@ -66143,12 +60210,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Assign new value as result of operation on columns to column in attribute table
-
Assign new value to column as result of operation on columns only if the result of query is TRUE
-
Bicubic or bilinear spline interpolation with Tykhonov regularization
-
Bilinear interpolation utility for raster maps
-
Blend color components for two rasters by given ratio
-
Blend red, green, raster layers to obtain one color raster
-
Break (topologically clean) polygons (imported from non topological format, like ShapeFile). Boundaries are broken on each point shared between 2 and more polygons where angles of segments are different
-
Brovey transform to merge multispectral and high-res panchromatic channels
-
Calculate average of raster within areas with the same category in a user-defined base map
-
Calculate covariance/correlation matrix for user-defined rasters
-
Calculate error matrix and kappa parameter for accuracy assessment of classification result
-
Calculate geometry statistics for vectors
-
Calculate linear regression from two rasters: y = a + b*x
-
Calculate median of raster within areas with the same category in a user-defined base map
-
Calculate mode of raster within areas with the same category in a user-defined base map
-
Calculate optimal index factor table for LANDSAT-TM raster
-
Calculate raster surface area
-
Calculate shadow maps from exact sun position
-
Calculate shadow maps from sun position determinated by date/time
-
Calculate statistics for raster
-
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Category or object oriented statistics
-
Cats
-
Cats (select from the map or using their id)
-
Change category values and labels
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Columns management
-
Compares bit patterns with raster
-
Compress and decompress raster
-
Computes a coordinate transformation based on the control points
-
Concentric circles
-
-
- Config
- Тохиргоо
+
Connect nodes by shortest route (traveling salesman)
-
Connect selected nodes by shortest tree (Steiner tree)
-
Connect vector to database
-
Convert 2D vector to 3D by sampling raster
-
Convert 2D vector to 3D vector by sampling of elevation raster. Default sampling by nearest neighbour
-
Convert GRASS binary vector to GRASS ASCII vector
-
-
- Convert a raster to vector
- Растераас вектор луу хөрвүүлэх
+
Convert a raster to vector within GRASS
-
-
- Convert a vector to raster
- Вектороос растер үүсгэх
+
Convert a vector to raster within GRASS
-
Convert bearing and distance measurements to coordinates and vice versa
-
Convert boundaries to lines
-
Convert centroids to points
-
Convex hull
-
Copy also attribute table (only the table of layer 1 is currently supported)
-
Count of neighbouring points
-
Create 3D volume map based on 2D elevation and value rasters
-
Create a MASK for limiting raster operation
-
Create a map containing concentric rings
-
Create and/or modify raster support files
-
Create aspect raster from DEM (digital elevation model)
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create grid in current region
-
Create new GRASS location and transfer data into it
-
Create new GRASS location from metadata file
-
Create new GRASS location from raster data
-
Create new GRASS location from vector data
-
Create new layer with category values based upon user's reclassification of categories in existing raster
-
Create new location from .prj (WKT) file
-
Create new raster by combining other rasters
-
Create new vector by combining other vectors
-
Create new vector with current region extent
-
Create nodes on network
-
Create parallel line to input lines
-
Create points along input lines
-
Create points/segments from input vector lines and positions
-
Create quantization file for floating-point raster
-
Create random 2D/3D vector points
-
Create random cell values with spatial dependence
-
Create random raster
-
Create random vector point contained in raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create shaded map
-
Create slope raster from DEM (digital elevation model)
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
Database management
Өгөгдлийн сангийн удирдлага
-
- Database parameters
- Өгөгдлийн сангийн параметрүүд
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Develop map
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector attributes
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
-
- Export
- Гаргах
+
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export from GRASS
GRASS-аас гаргах
-
- Export raster
- Растер гаргах
-
Export raster as non-georeferenced PNG image format
@@ -66957,1270 +61000,1262 @@ Returns a string representation of a color based on its hue, saturation, value a
Export raster to 8/24bit TIFF image at the resolution of the current region
-
Export raster to ASCII text file
-
Export raster to ESRI ARCGRID
-
Export raster to GRIDATB.FOR map file (TOPMODEL)
-
Export raster to Geo TIFF
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to VTK-ASCII
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extract features from vector
-
Extract selected features
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
-
- File
- Ажил
+
File management
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Filter image
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Help
- Туслах
+
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Hydrologic modelling
-
Imagery
-
-
- Import
- Импорт
+
Import ASCII raster
-
Import DXF vector
-
Import ESRI ARC/INFO ASCII GRID
-
Import ESRI E00 vector
-
Import GDAL supported raster
-
Import GDAL supported raster and create a fitted location
-
Import GRIDATB.FOR (TOPMODEL)
-
Import MapGen or MatLab vector
-
Import OGR vector
-
Import OGR vector and create a fitted location
-
Import OGR vectors in a given data source combining them in a GRASS vector
-
Import SPOT VGT NDVI
-
Import SRTM HGT
-
Import US-NGA GEOnet Names Server (GNS) country file
-
Import all OGR/PostGIS vectors in a given data source and create a fitted location
-
Import attribute tables in various formats
-
Import binary MAT-File(v4)
-
Import binary raster
-
Import from database into GRASS
-
Import geonames.org country files
-
Import into GRASS
-
Import loaded raster
-
Import loaded raster and create a fitted location
-
Import loaded vector
-
Import loaded vector and create a fitted location
-
Import only some layers of a DXF vector
-
Import raster from ASCII polygon/line
-
Import raster from coordinates using univariate statistics
-
Import raster into GRASS
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Input table
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage features
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Network analysis
-
Network maintenance
-
Number of rows to be skipped
-
Others
-
Output GML file
-
Output Shapefile
- Гаралтын shp файл
+
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Projection conversion of vector
-
Projection management
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster
- Растер
+
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reports
-
Reports and statistics
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
-
Split lines to shorter segments
-
Statistics
-
Sum raster cell values
-
Surface management
-
Tables management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Terrain analysis
-
Tests of normality on vector points
-
Text file
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform features
-
Transform image
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
-
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
optionsDialog
Warning!
-
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -68356,59 +62391,59 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Current Rules
-
Add Rule
-
Rule
-
Layer #1
-
Layer #2
-
Tolerance
-
Layer1ID
-
Layer2ID
-
No layer
-
Delete Rule
-
@@ -68416,7 +62451,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid second geometry.
-
Topology plugin
-
Invalid first geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
@@ -68556,7 +62591,7 @@ Returns a string representation of a color based on its hue, saturation, value a
N:
-
Mean:
@@ -68572,17 +62607,15 @@ Returns a string representation of a color based on its hue, saturation, value a
Min:
- хамгийн бага
ХБ:
Max:
- хамгийн их
ХИ:
CV:
-
Number of unique values:
@@ -68602,7 +62635,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Expected mean distance:
- Бодсон дундаж зай:
+
Nearest neighbour index:
@@ -68618,17 +62651,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
-
Open number input dialog
-
...
- ...
+
@@ -68636,12 +62669,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
-
...
- ...
+
-
+
\ No newline at end of file
diff --git a/i18n/qgis_nb.ts b/i18n/qgis_nb.ts
index 82263da217a..d2d143b87d6 100644
--- a/i18n/qgis_nb.ts
+++ b/i18n/qgis_nb.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Bibliotek:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<advarsel> geometry_columns tabellen finnes ikke!
Denne tabellen er viktig for mange GIS programmer for opptelling av tabeller.
@@ -417,13 +415,13 @@ Denne tabellen er viktig for mange GIS programmer for opptelling av tabeller.Skript:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<advarsel> Den installerte skriptversjonen stemmer ikke overrens medl versjonen av de frigitte skriptene!
Dette er sannsynligvis et resultat av feil PostGIS-oppgradering.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<advarsel> Denne brukeren har ikke rettigheter til å lese innholdet i geometry_columns tabellen!
Denne tabellen er viktig for mange GIS-applikasjoner for opptelling av tabeller.
@@ -2097,7 +2095,7 @@ Dette kan medføre uventede resultat.
lengdefelt
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Kan ikke slette eksisterende shapefil
%s
@@ -2405,47 +2403,24 @@ Er du sikker på at du vil fortsette?
Fjerner objekt fra nåværende utvalg
- Select by location
Velg etter lokasjon
- Select features in:
Velg objekter i:
- that intersect features in:
som krysser objekter i:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Endre nåværende utvalg med:
+ Endre nåværende utvalg med:
Use selected features only
- Bruk kun valgte objekter
+ Bruk kun valgte objekter
Please specify select layer
@@ -3408,7 +3383,7 @@ Programtillegget vil ikke aktiveres.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4727,7 +4702,7 @@ når du trykker på verktøydialogens hjelp-knapp.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Til eksponering av et datasett med 1 bånd med en fargetabell som et datasett med 3 (RGB) eller 4 (RGBA) bånd.
Brukbar for utdatatyper som JPEG, JPEG2000, MrSID, ECW som ikke støtter fargeindeserte datasett.
@@ -5527,7 +5502,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&Rediger
@@ -5547,157 +5522,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Velg
- Measure
Mål
- &Decorations
&Dekorasjoner
- &Layer
&Lag
- New
Ny
- &Plugins
&Programtillegg
- &Help
&Hjelp
- &Settings
&Innstillinger
- &Raster
&Raster
- Vect&or
Vekt&or
- &OpenStreetMap
&OpenStreetMap
- File
Fil
- Manage Layers
Administrer lag
- Digitizing
Digitalisering
- Advanced Digitizing
Avansert Digitalisering
- Map Navigation
Kartnavigasjon
- Attributes
Attributter
- Plugins
Programtillegg
- Help
Hjelp
- Raster
Raster
- Label
Etikett
- Vector
Vektor
- Database
Database
- Web
Web
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Lagre som bilde...
- &New Print Composer
&Ny utskiftslayout
- Ctrl+P
Ctrl+P
- Composer Manager...
Komponeringsstyring...
@@ -5717,949 +5692,941 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Ny fra mal
- Preview Mode
Forhåndsvisning
- Paste Features as
Lim inn objekter som
- &New
&Ny
- &Open...
&Åpne...
- &Save
&Lagre
- Save &As...
Lagre &som...
- Exit QGIS
Avslutt QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
&Angre
- Ctrl+Z
Ctrl+Z
- &Redo
&Gjør om igjen
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Klipp ut objekter
- Ctrl+X
Ctrl+X
- Copy Features
Kopier objekter
- Ctrl+C
Ctrl+C
- Paste Features
Lim inn objekter
- Ctrl+V
Ctrl+V
- Add Feature
Legg til objekt
- Ctrl+.
Ctrl+.
- Move Feature(s)
Flytt objekt(er)
- Reshape Features
Omform objekter
- Split Features
Del opp objekter
- Split Parts
Del opp deler
- Delete Selected
Slett valgte
- Add Ring
Legg til ring
- Add Part
Legg til del
- Simplify Feature
Forenkle objekt
- Delete Ring
Slett ring
- Delete Part
Slett del
- Merge Selected Features
Slå sammen valgte objekter
- Merge Attributes of Selected Features
Slå sammen attributter fra valgte objekter
- Node Tool
Knutepunktverktøy
- Rotate Point Symbols
Roter punktsymboler
- Snapping Options...
Snap innstillinger...
- Pan Map
Panorer kart
- Zoom In
Zoom inn
- Ctrl++
Ctrl++
- Zoom Out
Zoom ut
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Velg enkelt objekt
+ Velg enkelt objekt
+ Select Features by Rectangle
- Velg objekter med rektangel
+ Velg objekter med rektangel
- Select Features by Polygon
Velg objekter med polygon
- Select Features by Freehand
Velg objekter med frihånd
- Select Features by Radius
Velg objekter med radius
- Deselect Features from All Layers
Fjern valg av objekter fra alle lag
- Identify Features
Identifiser objekter
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Mål linje
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Mål område
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Mål vinkel
- Zoom Full
Zoom helt ut
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Zoom til lag
- Zoom to Selection
Zoom til utvalg
- Ctrl+J
Ctrl+J
- Zoom Last
Zoom til forrige
- Zoom Next
Zoom til neste
- Zoom Actual Size
Zoom til aktuell størrelse
- Zoom to Native Pixel Resolution
Zoom til utvalg
- Map Tips
Karttips
- Show information about a feature when the mouse is hovered over it
Vis imformasjon om et objekt, når musen dras over det
- New Bookmark...
Nytt bokmerke...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Vis bokmerker
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Oppdater
- Text Annotation
Tekst merknad
- Form Annotation
Form merknad
- Move Annotation
Flytt merknad
- Labeling
Etikettverktøy
- Layer Labeling Options
Innstillinger for etikettverktøy
- New Shapefile Layer...
Nytt Shapefil-lag...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Nytt SpatiaLite-lag...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Raster-kalkulator...
- Add Vector Layer...
Legg til vektorlag...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Legg til rasterlag...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Legg til PostGIS-lag...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Legg til SpatiaLite-lag...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Legg til MSSQL Spatial-lag...
- Add Oracle Spatial Layer...
Legg til Oracle Spatial-lag...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Legg til WMS/WMTS lag...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Åpne attributttabell
- Toggle Editing
Slå av/på redigering
- Toggles the editing state of the current layer
Slår av/på redigering på det valgte laget
- Save for Selected Layer(s)
Lagre for valgte lag
- Save edits to current layer, but continue editing
Lagre redigeringer i valgt lag, men fortsett redigering
- Save As...
Lagre som...
- Add from Layer Definition File...
Legg til fra lag-definisjonsfil...
- Save As Layer Definition File...
Lagre som lag-definisjonsfil...
- Normal
Normal
- Normal preview mode
Normal forhåndsvisning
- Simulate Photocopy (Grayscale)
Simulert fotokopi (gråtone)
- Simulate photocopy (grayscale)
Simulert fotokopi (gråtone)
- Simulate Fax (Mono)
Simulert faks (mono)
- Simulate fax (mono)
Simulert faks (mono)
- Simulate Color Blindness (Protanope)
Simulert fargeblindhet (protanopi/rødblindhet)
- Simulate color blindness (protanope)
Simulert fargeblindhet (protanopi/rødblindhet)
- Simulate Color Blindness (Deuteranope)
Simulert fargeblindhet (deuteranope)
- Simulate color blindness (deuteranope)
Simulert fargeblindhet (deuteranope)
- Set Scale Visibility of Layer(s)
Sett synlighet basert på skala for lag(ene)
- Remove Layer(s)
Fjern lag
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Velg CRS av lag
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Sett prosjekt CRS fra lag
- Properties...
Egenskaper...
- Query...
Spørring...
- Add to Overview
Legg til oversikt
- Add All to Overview
Legg til alle i oversikten
- Remove All from Overview
Fjern alle fra oversikt
- Show All Layers
Vis alle lag
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Skjul alle lag
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Administrerer og installer programtillegg...
- Open Field Calculator
Åpne feltkalkulator
- Add Delimited Text Layer...
Legg til skilletegn tekstlag...
- Add Delimited Text Layer
Legg til skilletegn tekstlag
- New Vector Layer
Ny vektorlag
- Paste features in clipboard into a new OGR vector layer.
Lim inn objekter til et nytt OGR vektor lag.
- New Memory Vector Layer
Nytt vektor minnelag
- Paste features in clipboard into a new memory vector layer.
Lim inn objekter til et nytt minnevektorlag.
- Toggle Full Screen Mode
Slå av/på fullskjerm
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Prosjektegenskaper...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Innstillinger...
- Custom CRS...
Egendefinert CRS...
- Configure shortcuts...
Konfigurer hurtigtaster...
- Local Histogram Stretch
Lokal Histogramutstrekning
- Stretch histogram of active raster to view extents
Utvid aktiv rasters histogram til kartutstrekningen
- Help Contents
Innhold i hjelp
- F1
F1
- API documentation
API dokumentasjon
- QGIS Home Page
QGIS hjemmeside
- Ctrl+H
Ctrl+H
- Check QGIS Version
Sjekk QGIS versjon
- Check if your QGIS version is up to date (requires internet access)
Sjekk om din QGIS versjon er oppdatert (krever internett-tilgang)
- About
Om
- QGIS Sponsors
QGIS sponsorer
- Move Label
Flytt etikett
- Rotate Label
Roter etikett
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Roter etikett
Ctl (Cmd) øker med 15 grd.
- Change Label
Endre etikett
- Style Manager...
Skrifttypestyring...
- Python Console
Python-konsoll
- Full histogram stretch
Full Histogram utstrekning
- Stretch Histogram to Full Dataset
Strekk histogram til fullt dataset
- Customization...
Tilpasning...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Det er her bare for at unngå snarveikonflikter, snarveien er i QgsCustomization
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Embed lag og grupper...
- Embed layers and groups from other project files
Embed lag og grupper fra andre prosjektfiler
- &Copyright Label
&Opphavsrett-etikett
- Creates a copyright label that is displayed on the map canvas.
Oppretter en opphavsrett-etikett som vises på kartet.
- &North Arrow
&Nordpil
- "Creates a north arrow that is displayed on the map canvas"
Oppretter en nordpil som vises på kartet
- &Scale Bar
&Målestokk
- Creates a scale bar that is displayed on the map canvas
Oppretter en målestokk som vises på kartet
- Add WFS Layer...
Legg til WFS lag...
- Add WFS Layer
Legg til WFS lag
- Feature Action
Objekthandling
- Run Feature Action
Kjør objektkommando
- Pan Map to Selection
Panorer kart til utvalg
- Touch zoom and pan
Berør zoom og panorer
- Offset Curve
Forskyv kurve
- Copy style
Kopier skrifttype
- Paste style
Lim inn skriftype
- Add WCS Layer...
Legg til WCS lag...
- &Grid
&Rutenett
- Grid
Rutenett
- Pin/Unpin Labels
Fest/frigjør etiketter
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6670,44 +6637,44 @@ Shift frigjør, Ctl (Cmd) skifter status
Virker på alle redigerbare lag
- Highlight Pinned Labels
Fremhev festede etiketter
- New Blank Project
Nytt tomt prosjekt
- Local Cumulative Cut Stretch
Lokal kumulativ beskjæringsstrekk
- Local cumulative cut stretch using current extent, default limits and estimated values.
Lokalt kumulativ beskjæringsstrekk med nåværende utstrekning, standard begrensninger og estimerte verdier.
- Full Dataset Cumulative Cut Stretch
Fullt dataset kumulativ beskjæringsstrekk
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Fullt dataset beskjæringsstrekk med full dataset utstrekning, standard begrensninger og estimerte verdier.
- Show/Hide Labels
Vis/skjul etiketter
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6718,128 +6685,128 @@ Shift+klikk eller marker for å skjule etikett
Virker på alle redigerbare lag
- Html Annotation
Html merknad
- Duplicate Layer(s)
Dupliser lag
- SVG annotation
SVG merknad
- Save for All Layers
Lagre for alle lag
- Rollback for All Layers
Gjenta for alle lag
- Cancel for All Layers
Avbryt for alle lag
- Rollback for Selected Layer(s)
Gjenta for valgte lag
- Current Edits
Aktuelle redigeringer
- Cancel for Selected Layer(s)
Avbryt for valgte lag
- Save Layer Edits
Lagre lagredigeringer
- Rotate Feature(s)
Roter objekt(er)
- &Download data
&Last ned data
- &Import topology from XML
&Importer topologi fra XML
- &Export topology to SpatiaLite
&Eksporter topologi til SpatiaLite
- Increase brightness
Øk lysstyrken
- Decrease brightness
Reduser lysstyrken
- Increase contrast
Øk kontrast
- Decrease contrast
Reduser kontrast
- Select By Expression
Velg fra uttrykk
- Select features using an expression
Velg objekter med et uttrykk
- Need commercial support?
Trenger komersiell støtte?
- DXF Export...
Eksporter DXF...
- Fill Ring
Fyll ring
@@ -7285,18 +7252,13 @@ Virker på alle redigerbare lag
Can't save model
Kan ikke lagre modell
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
Modell inneholder ingen algoritmer og/eller parametre og kan ikke utføres
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
@@ -7314,6 +7276,11 @@ See the log for more information.
Could not open model
Kunne ikke åpne modell
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
Parametere
@@ -8165,22 +8132,22 @@ See the log for more information.
Vurderer normale derivater...
- minidump written to %1
minidump skrevet til %1
- writing of minidump to %1 failed (%2)
skrivning av minidump til %1 mislyktes (%2)
- creation of minidump to %1 failed (%2)
opprettelse av minidump til %1 mislyktes (%2)
- Crash dumped
Krasj dumpet
@@ -8334,6 +8301,7 @@ Feil(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
Generert CRS
@@ -8498,85 +8466,85 @@ Feil(%2): %3
Kan ikke konvertere '%1' til intervall
- Cannot convert '%1' to boolean
Kan ikke konvertere '%1' til boolsk
- Domain max must be greater than domain min
Domenemaksimum må være større enn domeneminimum
- Exponent must be greater than 0
Eksponent må være større enn 0
- Invalid regular expression '%1': %2
Ugyldig regulært uttrykk '%1': %2
- Index is out of range
Indeksen er utenfor rekkevidde
- Cannot convert '%1:%2:%3' to color
Kan ikke konvertere '%1:%2:%3' til farge
- Cannot convert '%1:%2:%3:%4' to color
Kan ikke konvertere '%1:%2:%3:%4' til farge
- "%1" is not a valid color ramp
"%1" er ikke en gyldig fargerampe
- Cannot convert '%1:%2:%3:%4:%5' to color
Kan ikke konvertere '%1:%2:%3:%4:%5' til farge
- function help for %1 missing
funksjonshjelp for %1 mangler
- Operators
Operatorer
- Fields and Values
Felt og verdier
- Math
Matematikk
- Conversions
Konverteringer
- Conditionals
Vilkårlige
@@ -8584,97 +8552,97 @@ Feil(%2): %3
second|seconds
list of words separated by | which reference years
-
minute|minutes
list of words separated by | which reference minutes
-
hour|hours
list of words separated by | which reference minutes hours
-
day|days
list of words separated by | which reference days
-
week|weeks
wordlist separated by | which reference weeks
-
month|months
list of words separated by | which reference months
-
year|years
list of words separated by | which reference years
-
- Date and Time
Dato og tid
- String
Streng
- Color
Farge
- Geometry
Geometri
- Record
Post
- No root node! Parsing failed?
Ingen rotknute! Fortolkning misslyktes?
- (no root)
(ingen rot)
- Unary minus only for numeric values.
Unære minus kun for numeriske verdier.
- Can't preform /, *, or % on DateTime and Interval
Kan ikke utføre /, * eller % på DateTime eller Intervall
- [unsupported type;%1; value:%2]
[type ikke støttet, %1, verdi: %2]
- Column '%1' not found
Kolonne '%1' ikke funnet
@@ -8762,10 +8730,7 @@ Feil(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- linje %1 inneholder %n duplikat knutepunkt på %2
- linje %1 inneholder %n duplikat knutepunkt på %2
-
+ linje %1 inneholder %n duplikat knutepunkt på %2 linje %1 inneholder %n duplikat knutepunkt på %2
Version 0.1
@@ -9886,6 +9852,7 @@ Only %1 of %2 features written.
Layers
Lag
@@ -10463,12 +10430,14 @@ Only %1 of %2 features written.
Shapefil til PostgreSQL/PostGIS importverktøy
+ SQL Anywhere plugin
- SQL Anywhere programtillegg
+ SQL Anywhere programtillegg
+ Store vector layers within a SQL Anywhere database
- Lagre vektorlag innenfor en SQL Anywhere database
+ Lagre vektorlag innenfor en SQL Anywhere database
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS kunne ikke finne din GRASS-installasjon.
Vil du angi stien (GISBASE) til din GRASS-installasjon?
@@ -10845,7 +10814,7 @@ Vil du angi stien (GISBASE) til din GRASS-installasjon?
Storage and eXchange Format
-
Kunne ikke opprette fil %1.qpj
- Fetching features failed.
SQL:%1
Error: %2
@@ -10918,7 +10887,7 @@ SQL: %1
Feil: %2
- Oracle
Oracle
@@ -11380,12 +11349,14 @@ SQL: %1
multidelobjekt
+ Error describing bind parameters
- Feil ved beskrivelse av bindparametre
+ Feil ved beskrivelse av bindparametre
+ Error binding parameters
- Feil ved binding av paramtre
+ Feil ved binding av paramtre
Read-only field that generates a UUID if empty.
Skrivebeskyttet felt som skaper et UUID hvis det er tomt.
-
- Legend
- Tegnforklaring
-
QSpatiaLiteDriver
- Error opening database
Feil ved åpning av database
- Error closing database
Feil ved lukking av database
- Unable to begin transaction
Kunne ikke begynne transaksjon
- Unable to commit transaction
Kunne ikke utføre transaksjon
- Unable to rollback transaction
Kunne ikke rulle tilbake transaksjon
@@ -11590,27 +11556,27 @@ Svaret var:
Ingen spørring
- Unable to execute statement
Kan ikke kjøre uttrykk
- Unable to execute multiple statements at a time
Kan ikke kjøre flere uttrykk på en gang
- Unable to reset statement
Kan ikke nullstille uttrykk
- Unable to bind parameters
Kan ikke binde parametre
- Parameter count mismatch
Parameterantall passer ikke
@@ -11787,61 +11753,61 @@ Svaret var:
QGIS er klar!
- Minimize
Minimer
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Minimer aktivt vindu til dokken
- Zoom
Zoom
- Toggles between a predefined size and the window size set by the user
Skifter mellom en predefinert størrelse og vindusstørrelsen angitt av brukeren
- Bring All to Front
Flytt alle fremst
- Bring forward all open windows
Flytt alle åpne vinuder frem
- Current Edits
Nåværende redigeringer
- Error
Feil
- Failed to open Python console:
Kunne ikke åpne Python-konsoll:
@@ -11865,138 +11831,138 @@ Vennligs kontakt utviklerne.
QGIS - %1 ('%2')
- Panels
Paneler
- Toolbars
Verktøylinjer
- Window
Vindu
- &Database
&Database
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
Statuslinje, som viser status på opptegning av lag og andre tidkrevende operasjoner
- Toggle extents and mouse position display
Slå på/av visning av utstrekning og pekerposisjon
- Coordinate:
Koordinat:
- Current map coordinate
Nåværende kartkoordinat
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Viser kartkoordinatene i nåværende markørposisjon. Visningen blir løpende oppdatert når musen flyttes. Det lar deg også flytte kartvinduet sentrum til en gitt posisjon. Formatet er bredde, lengde eller øst, nord
- Current map coordinate (lat,lon or east,north)
Nåværende kartkoordinat (bredde, lengde eller øst, nord)
- Scale
Skala
- Current map scale
Nåværende kartmålestokk
- Displays the current map scale
Viser den nåværende kartskalaen
- Current map scale (formatted as x:y)
Nåværende kartskala (formatert som x:y)
- Render
Tegn opp
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Når denne er markert tegnes kartlagene opp i respons til kartnavigasjonskommandoer og andre handlinger. Når den ikke er marker blir kartet ikke oppdatert. Dette lar deg legge til et stort antall lag og symbolisere dem før de tegnes opp i kartet.
- Toggle map rendering
Slå av/på kartopptegnelse
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Dette ikonet viser om transformasjon mellom koordinatsystem er slått på eller ikke. Klikk på ikonet for å åpne dialogen projektegenskaper for å endre dette.
- CRS status - Click to open coordinate reference system dialog
CRS-status. Klikk for å åpne dialog for koordinatsystem
- Ready
Klar
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Oversiktskartvindu. Dette kartvinduet kan brukes til å vise et posisjonskart, som viser den aktuelle utstrekningen som et rødt rektangel. Alle lag i kartet kan legges til i oversiktskartet.
- Overview
Oversikt
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Tegnforklaring som viser alle nåværende lag i kartvinduet. Kryss av lagene for å skru dem på eller av. Dobbeltklikk på et lag i tegnforklaringen for å tilpasse dets visning og endre andre egenskaper.
- Layers
Lag
- Map layer list that displays all layers in drawing order.
Liste over kartlag som viser alle lag i tegningsrekkefølge.
- Layer order
Lagrekkefølge
@@ -12006,394 +11972,388 @@ Vennligs kontakt utviklerne.
Privat qgis.db
- < Blank >
< Tom >
- QGIS version
QGIS-versjon
- QGIS code revision
QGIS-kodeversjon
- Compiled against Qt
Kompilert mot Qt
- Running against Qt
Kjører mot Qt
- Compiled against GDAL/OGR
Kompilert mot GDAL/OGR
- Running against GDAL/OGR
Kjører mot GDAL/OGR
- PostgreSQL Client Version
PostgreSQL-klientversjon
- No support.
Ingen støtte.
- SpatiaLite Version
SpatiaLite-versjon
- QWT Version
QWT-versjon
- PROJ.4 Version
PROJ.4-versjon
- QScintilla2 Version
QScintilla2-versjon
- This copy of QGIS writes debugging output.
Denne kopien av QGIS skriver feilsøkingsinformasjon.
- %1 doesn't have any layers
%1 har ingen lag
- Invalid Data Source
Ugyldig datakilde
- %1 is not a valid or recognized data source
%1 er ikke en gyldig eller kjent datakilde
- Vector
Vektor
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Kan ikke hente PostgreSQL-utvalgsdialog fra tilbyder.
- %1 is an invalid layer - not loaded
%1 er et ugyldig lag - ikke lastet
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 er et ugyldig lag og kan ikke leses inn. Sjekk <a href="#messageLog">meldingsloggen</a> for ytterligere informasjon.
- QGIS files
QGIS-filer
- No legend entries selected
Ingen tegnforklaringsoppføringer valgt
- Select the layers and groups you want to remove in the legend.
Velg lagene eller gruppene du vil fjerne fra tegnforklaringen.
- Remove layers and groups
Fjern lag og grupper
- Remove %n legend entries?
number of legend items to remove
-
- Fjern %n tegnforklaringsoppføring?
- Fjern %n tegnforklaringsoppføringer?
-
+ Fjern %n tegnforklaringsoppføring? Fjern %n tegnforklaringsoppføringer?
- %n legend entries removed.
number of removed legend entries
-
- %n tegnforklaringsoppføring fjernet.
- %n tegnforklaringsoppføringer fjernet.
-
+ %n tegnforklaringsoppføring fjernet. %n tegnforklaringsoppføringer fjernet.
- %1 (%2 type unsupported)
%1 (%2 type ikke støttet)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/en/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Vil du gjemme det aktuelle prosjektet? %1
- Invalid Layer
Ugyldig lag
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Kan ikke hente SpatiaLite utvalgsdialog fra tilbyder.
- Delimited Text
Avgrenset tekst
- Cannot get Delimited Text select dialog from provider.
Kan ikke hente avgrenset tekst-dialog fra tilbyder.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Kan ikke hente MSSQL-utvalgsdialog fra tilbyder.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Kan ikke hente Oracle-utvalgssdialog fra tilbyder.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Kan ikke hentel WMS-utvalgsdialog fra tilbyder.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Kan ikke hente WCS-utvalgsdialog fra tilbyder.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Kan ikke hente WFS-utvalgsdialog fra tilbyder.
- Default failed to open: %1
Kunne ikke åpne standard: %1
- Default not found: %1
Standard ikke funnet: %1
- Open Template Project
Åpne malprosjekt
- Auto-open Project
Åpne prosjekt automatisk
- Failed to open: %1
Kunne ikke åpne: %1
- Not valid project file: %1
Ikke gyldig prosjektfil: %1
- Project failed to open: %1
Kunne ikke åpne prosjekt: %1
- Default template has been reopened: %1
Standardmal har blitt åpnet på nytt: %1
- File not found: %1
Fil ikke funnet: %1
- Calculating...
Beregner...
- Abort...
Avbryt...
- Choose a QGIS project file to open
Velg en QGIS-prosjektfil som skal åpnes
- Loading project: %1
Laster prosjekt: %1
- Unable to open project
Kunne ikke åpne prosjekt
- Security warning
Sikkerhetsadvarsel
- project macros have been disabled.
prosjektmakroer har blitt deaktivert.
- Enable macros
Aktiver makroer
- Project loaded
Prosjekt lastet
- Choose a QGIS project file
Velg en QGIS-prosjektfil
- Saved project to: %1
Lagret prosjekt til: %1
- Unable to save project %1
Kunne ikke lagre prosjekt %1
- Choose a file name to save the QGIS project file as
Velg et filnavn å lagre QGIS-prosjektfilen som
- Unable to load %1
Kunne ikke laste %1
- Choose a file name to save the map image as
Velg et filnavn å lagre kartbildet som
- Saved map image to %1
Lagret kartbildet til %1
- Default system font substituted.
Standard systemskrifttype byttet ut.
- Labeling
Påskrifter
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
Skrifttype for lag <b><u>%1</u></b> ikke funnet (<i>%2</i>). %3
- Open labeling dialog
Åpne påskriftsdialog
@@ -12494,451 +12454,445 @@ Vennligs kontakt utviklerne.
Dato/tid
- Compiled against GEOS
Kompilert mot GEOS
- Running against GEOS
Kjører mot GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
Utilstrekkelig tillatelser
- The project file is not writable.
Prosjektfilen er ikke skrivbar.
- DXF export completed
DFX-eksport fullført
- DXF export failed
DXF-export misslyktes
- Commit errors
Commitfeil
- Could not commit changes to layer %1
Kunne ikke lagre endringer til lag %1
- Errors: %1
Feil: %1
- Show more
Vis mer
- Labeling Options
Påskriftsinnstillinger
- Please select a vector layer first
Vennligst velg et vektorlag først
- Layer labeling settings
Lagets påskriftsinnstillinger
- Reading raster
Leser raster
- Cannot write raster error code: %1
Kan ikke skrive til raster feilkode: %1
- Saving done
Lagring er ferdig
- Export to vector file has been completed
Eksport til vektorfil er fullført
- Save error
Lagre feil
- Export to vector file failed.
Error: %1
Kunne ikke lagre vektorfil.
Feil: %1
- No Layer Selected
Ingen lag valgt
- To delete features, you must select a vector layer in the legend
For å slette objekt skal du velge et vektorlag i tegnforklaringen
- No Vector Layer Selected
Ingen vektorlag valgt
- Deleting features only works on vector layers
Sletting av objekter fungerer kun på vektorlag
- Provider does not support deletion
Tilbyder støtter ikke sletting
- Data provider does not support deleting features
Datatilbyder støtter ikke sletting av objekter
- Layer not editable
Lag kan ikke redigeres
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
Nåværende lag kan ikke redigeres. Velg 'Start redigering' i verktøylinjen for digitalisering.
- No Features Selected
Ingen valgte objekt
- The current layer has not selected features
Nåværende lag har ingen valgte objekter
- Delete features
Slett objekter
- Delete %n feature(s)?
number of features to delete
-
- Slett %n objekt?
- Slett %n objekter?
-
+ Slett %n objekt? Slett %n objekter?
- Features deleted
Objekter slettet
- Problem deleting features
Problem med å slette objekt
- A problem occured during deletion of features
Et problem oppsto ved sletting av objekter
- %n feature(s) deleted.
number of features deleted
-
- %n objekt slettet.
- %n objekter slettet.
-
+ %n objekt slettet. %n objekter slettet.
- Merging features...
Slår sammen objekter...
- Abort
Avbryt
- Create unique print composer title
Opprett unik tittel til utskriftslayout
- (title generated if left empty)
(tittel autogenereres hvis tom)
- Composer title
Layouttittel
- Title can not be empty!
Tittel kan ikke være tom!
- Title already exists!
Tittel finnes allerede!
- Composer %1
Layout %1
- copy
kopier
- No active layer
Ingen aktive lag
- No active layer found. Please select a layer in the layer list
Ingen aktive lag funnet. Velg et lag i laglisten
- Active layer is not vector
Aktivt lag er ikke vektor
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Verktøyet for å slå sammen objekt fungerer kun på vektorlag. Vleg et vektorlag fra listen
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Verktøyet for å slå sammen objekt fungerer kun i redigeringstilstand. Gå til Lag->Slå på redigering
- Not enough features selected
Ikke nok objekter valgt
- The merge tool requires at least two selected features
Verktøyet for å slå sammen objekt krever at minst to objekter er valgt
- Merged feature attributes
Sammenslåtte objektattributt
- Merge failed
Sammenslåing misslyktes
- An error occured during the merge operation
Det oppsto en feil under sammenslåingen
- Union operation canceled
Unionhandlingen avbrutt
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
Unionhandlingen ville resultert i en geometritype som ikke er kompatibel med det nåværende lag og er derfor avbrudt
- Merged features
Sammenslåtte objekter
- No active vector layer
Ingen aktive vektorlag
- To select features, choose a vector layer in the legend
Velg et vektorlag i tegnforklaringen for å velge objekt
- Features cut
Objekter klippet
- Features pasted
Objekter limt inn
- Paste features
Lim inn objekter
- no features could be successfully pasted.
ingen ombjekter kunne limes inn.
- %1 features were successfully pasted.
%1 objekter ble limt inn.
- %1 of %2 features could be successfully pasted.
%1 av %2 objekter ble limt inn.
- Pasted
Limet inn
- New memory layer name
Navn på nytt minnelag
- Layer name
Lagnavn
- No features in clipboard.
Ingen objekter i utklippstavlen.
- No features with geometry found, point type layer will be created.
Ingen objekter med geometri funnet, punkttypelag vil bli opprettet.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Flere geometrityper funnet, objekter med geometri som skiller seg fra %1 vil bli opprettet uten geometri.
- Cannot create new layer
Kan ikke opprette nytt lag
- Cannot create field %1 (%2,%3)
Kan ikke opprette felt %1 (%2, %3)
- Cannot copy style: %1
Kan ikke kopiere stil: %1
- Cannot parse style: %1:%2:%3
Kan ikke tyde stil: %1: %2: %3
- Cannot read style: %1
Kan ikke lese stil: %1
- Start editing failed
Start av redigering mislyktes
- Provider cannot be opened for editing
Tilbyder kan ikke åpnes for redigering
- Stop editing
Stopp redigering
- Do you want to save the changes to layer %1?
Vil du lagre endringer til lag %1?
- Problems during roll back
Problemer med tilbakerulling
- Could not %1 changes to layer %2
Errors: %3
@@ -12949,343 +12903,340 @@ Feil: %3
- rollback
rulle tilbake
- cancel
avbryt
- Save
lagre
- all
alle
- Rollback
Rulle tilbake
- Cancel
Avbryt
- Current edits
Nåværende redigeringer
- %1 current changes for %2 layer(s)?
%1 nåværende redigereinger for %2 lag?
- copy
kopier
- Plugin layer
Programtilleggslag
- Memory layer
Minneslag
- Duplicate layer:
Dupliser lag:
- %1 (duplication resulted in invalid layer)
%1 (duplisering resulterte i ugyldig lag)
- Set scale visibility for selected layers
Sett synlighet etter skala for valgte lag
- Couldn't load Python support library: %1
Kunne ikke laste bibliotek for Python-støtte: %1
- Couldn't resolve python support library's instance() symbol.
Kunne ikke løse ut python-støttebibliotekets instans ()-symbol.
- Python support ENABLED :-)
Python støtte aktivert :-)
- There is a new version of QGIS available
Det er en ny versjon av QGIS tilgjengelig
- You are running a development version of QGIS
Du kjører en utviklingversjon av QGIS
- You are running the current version of QGIS
Du kjører den nåværende versjonen av QGIS
- Would you like more information?
Ønsker du mer informasjon?
- QGIS Version Information
QGIS versjonsinformasjon
- QGIS - Changes since last release
QGIS - Endringer siden forrige slipp
- Unable to get current version information from server
Kan ikke hente nåværende versjonsinformasjon fra server
- Connection refused - server may be down
Tilkobling nektet - serveren kan være nede
- QGIS server was not found
Fant ikke QGIS-server
- Unknown network socket error: %1
Ukjent nettverksfeil: %1
- Unable to communicate with QGIS Version server
%1
Kan ikke kommunisere med QGIS-versjonsserver
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
For å utføre en full histogramstrekk må du ha valgt et rasterlag.
- To change brightness or contrast, you need to have a raster layer selected.
For å endre lysstyrke eller kontrast må du ha valgt et rasterlag.
- en
documentation language
en
- Layer is not valid
Lag er ikke ugyldig
- The layer %1 is not a valid layer and can not be added to the map
Laget %1 er ikke et gyldig lag og kan ikke tilføyes til kartet
- The layer is not a valid layer and can not be added to the map
Laget er ikke gyldig og kan ikke tilføyes kartet
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Prosjekt har lag i redigeringstilstand med ulagrede endringer, som IKKE vil bli lagret!
- Save?
Lagre?
- Current CRS: %1 (OTFR enabled)
Nåværende CRS: %1 (OTFR aktivert)
- Current CRS: %1 (OTFR disabled)
Nåværende CRS: %1 (OTFR deaktivert)
- Map coordinates for the current view extents
Kartkoordinater for nåværende visningsutstrekning
- Map coordinates at mouse cursor position
Kartkoordinater på musemarkørens posisjon
- Extents:
Utstrekning:
- Maptips require an active layer
Karttips krever et aktivt lag
- %n feature(s) selected on layer %1.
number of selected features
-
- %n objekt valgt på lag %1.
- %n objekter valgt på lag %1.
-
+ %n objekt valgt på lag %1. %n objekter valgt på lag %1.
- Open a GDAL Supported Raster Data Source
Åpne en GDAL-støttet raster datakilde
- Error adding valid layer to map canvas
Feil ved tillegging av gyldig lag til kartvindu
- Raster layer
Rasterlag
- %1 is not a supported raster data source
%1 er ikke en rasterkilde som støttes
- Unsupported Data Source
Datakilde ikke støttet
- Exit QGIS
Avslutt QGIS
- Do you really want to quit QGIS?
Vil du virkelig avslutte QGIS?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Denne prosjektfilen ble lagret med en eldre vesjon av QGIS. Når du lagrer denne prosjektfilen, vil QGIS oppdatere den til den seneste versjonen, muligens gjør dette den ubrukelig i eldre versjoner av QGIS.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Denne prosjektfilen ble lagret med en eldre versjon av QGIS. Når du lagrer denne prosjektfilen, vil QGIS oppdatere den til nyeste versjon, som muligens kan gjøre den ubrukelig i eldre versjoner av QGIS<p>Selv om QGIS-utviklerne prøver å opprettholde bakoverkompabilitet, så kan det være en del av informasjonen fra den gamle prosjektfilen som kan gå tapt. For å forbedre kvaliteten av QGIS setter vi pris på om du oppretter en feilrapport på %3. Husk å inkludere den gamle prosjektfilen og ang hvilken versjon av QGIS du brukte når du oppdaget feilen.<p>For å fjerne denne advarselen, når en gammel prosjektfil åpnes, avmarker ruten '%5' i %4 menyen.<p>Versjon av prosjektfil: %1<br>Nåværende versjon av QGIS: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Innstillinger: Generelle innstillinger: Generelt</tt>
- Warn me when opening a project file saved with an older version of QGIS
Advar meg ved åpning av prosjektfil som lagres med en eldre versjon av QGIS
- Project file is older
Prosjektfil er eldre
- This project file was saved by an older version of QGIS
Denne prosjektfilen ble lagret med en eldre versjon av QGIS
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
En nettverksordre ble tidsutkoblet, motatte data er sannsynligvis ufullstendige.
- Warning
Advarsel
- This layer doesn't have a properties dialog.
Dette lag har ikke en egenskapsdialog.
- Authentication required
Autentisering kreves
- Proxy authentication required
Mellomvertsautentisiering kreves
- SSL errors occured accessing URL %1:
SSL-feil oppsto ved tilgang til URL %1:
-
Always ignore these errors?
@@ -13294,13 +13245,10 @@ Always ignore these errors?
Ignorer alltid disse feilene?
- %n SSL errors occured
number of errors
-
- %n SSL-feil oppsto
- %n SSL-feil oppsto
-
+ %n SSL-feil oppsto %n SSL-feil oppsto
@@ -13332,7 +13280,7 @@ Ignorer alltid disse feilene?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13682,19 +13630,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
Unntak
- unknown exception
ukjent unntak
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13719,7 +13667,7 @@ Bruker DB sti: %9
-
match indentation of application state
@@ -13727,24 +13675,24 @@ Bruker DB sti: %9
- [ERROR] Can not make qgis.db private copy
[FEIL] Kan ikke lage en privat kopi av qgis.db
- Could not open qgis.db
Kunne ikke åpne qgis.db
- Migration of private qgis.db failed.
%1
Feil ved migrasjon av privat qgis.db.
%1
- Update of view in private qgis.db failed.
%1
Kunne ikke oppdatere visning i den private qgis.db.
@@ -13754,28 +13702,28 @@ Bruker DB sti: %9
QgsAtlasComposition
- Atlas filter eval error: %1
Atlas filter evalueringsfeil: %1
- Composer
Layout
- No matching atlas features
Ingen samsvarende atlas objekt
- Atlas feature %1 of %2
Atlas objekt %1 av %2
- Atlas filename evaluation error: %1
Atlas filnavn evalueringsfeil: %1
@@ -13791,7 +13739,7 @@ Bruker DB sti: %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Kunne ikke sette filnavnmønster som '%1'.
@@ -14486,10 +14434,7 @@ Analysefeil:
Attribute table - %1 (%n Feature(s))
feature count
-
- Attributttable . %1 (%n objekt)
- Attributttable . %1 (%n objekt(er))
-
+ Attributttable . %1 (%n objekt) Attributttable . %1 (%n objekt(er))
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Vil du virkelig slette %n bokmerke?
- Vil du virkelig slette %n bokmerker?
-
+ Vil du virkelig slette %n bokmerke? Vil du virkelig slette %n bokmerker?
QgsCategorizedSymbolRendererV2Model
- Symbol
Symbol
- Value
Verdi
- Label
Etikett
@@ -15272,49 +15214,49 @@ Database:%2
Avansert
- Random colors
Tilfeldige farger
- Symbol levels...
Symbolnivå...
- High number of classes!
Høyt antall klasser!
- Classification would yield %1 entries which might not be expected. Continue?
Klassifisering skulle skape %1 klasser, noe som kunne være uventet. Fortsett?
- Error
Feil
- There are no available color ramps. You can add them in Style Manager.
Der er ingen tilgjengelige fargerramper. Du kan legge dem til i Symbolhåndtereren.
- The selected color ramp is not available.
Den valgte fargerampen er ikke tilgjengelig.
- Confirm Delete
Bekreft slett
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Klassifiseringsfeltet ble endret fra '%1' til '%2'.
Skal de eksisterende klassene slettes før klassifisering?
@@ -15373,25 +15315,20 @@ Skal de eksisterende klassene slettes før klassifisering?
QgsColorButton
- Select Color
Velg farge
- Copy color
Kopier farge
- Paste color
Lim inn farge
-
- Pick color
-
QgsColorDialog
@@ -15463,7 +15400,7 @@ Skal de eksisterende klassene slettes før klassifisering?
Composer
Layout
@@ -15622,8 +15559,8 @@ Skal de eksisterende klassene slettes før klassifisering?
Set as atlas feature for %1
Bruk som atlasobjekt for %1
@@ -15660,7 +15597,7 @@ Skal de eksisterende klassene slettes før klassifisering?
Choose a file name to save the map as
Velg et filnavn å lagre kartet som
@@ -15671,15 +15608,15 @@ Skal de eksisterende klassene slettes før klassifisering?
Empty filename pattern
Tomt filnavnmønster
The filename pattern is empty. A default one will be used.
Filnavnmønsteret er tomt. Standarden vil bli brukt.
@@ -15690,15 +15627,15 @@ Skal de eksisterende klassene slettes før klassifisering?
Unable to write into the directory
Kan ikke skrive til mappen
The given output directory is not writable. Cancelling.
Den angitte utdatamappen er ikke skrivbar. Avbryter.
@@ -15708,251 +15645,251 @@ Skal de eksisterende klassene slettes før klassifisering?
Atlas processing error
Atlas prosesseringfeil
Feature filter parser error: %1
Feil ved fortolkning av objektfilter: %1
Error creating %1.
-
Rendering maps...
Renderer kart...
Abort
Avbryt
- Big image
Stort bilde
- To create image %1x%2 requires about %3 MB of memory. Proceed?
For å opprette et bilde %1x%2 krever ca %3 MB minne. Fortsette?
- Choose a file name to save the map image as
Velg et filnavn å lagre kartbildet som
- Memory Allocation Error
Minne tildelingsfeil
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
Å danne bilde #%1( %2x%3 @ %4dpi ) kan resultere i brist på minne.
Vennligst prøv en lavere oppløsning eller et mindre papirformat
- Image export error
-
- Directory where to save image files
Mappe hvor bildefiler skal lagres
- Image format:
Bildeformat:
- SVG warning
SVG-advarsel
- Don't show this message again
Vis ikke denne meldingen igjen
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>SVG-eksportfunksjonen i QGIS har flere problemer pga feil og mangler i
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4-SVG-kod. Det er spesielt problemer med lag, som ikke beskjæres til kartets begrensningsboks. </p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Hvis du trenger en vektor-basert utdatafil fra QGIS, foreslås det at du prøver å skrive til PostScript, hvis ikke resultatet fra SVG er tilfredstillende.</p>
- SVG Format
SVG-format
- Directory where to save SVG files
Mappe hvor SVG-filer skal lagres
- SVG export error
-
- on page
på side
- SVG error
SVK-feil
- There was an error in SVG output for SVG layer
Det oppsto en feil i SVG-utdata for SVG-lag
- copy
kopier
- Duplicating composer...
Dupliserer layout...
- Duplicate Composer
Dupliser layout
- Composer duplication failed.
Duplikasjon av layout mislyktes.
- Save template
Lagre mal
- Composer templates
Layoutmal
- Save error
Lagre feil
- Error, could not save file
Feil, kunne ikke lagre fil
- Load template
Last mal
- Read error
Lesefeil
- Error, could not read file
Feil, kunne ikke lese fil
- Composer error
Layoutfeil
- Error, could not create new composer
Feil, kunne ikke opprette en ny layout
- Loading template into composer...
Laster inn mal til layout...
- Project contains WMS layers
Projekt inneholder WMS-lag
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Noen WMS-servere (f.eks. UMN kartverver) har en begrensning på BREDDE og HØYDE-parameter. Skriver du ut slike lag kan grensene overskrides. Hvis dette er tilfellet, skrives ikke WMS-laget ut
- Project contains composition effects
Prosjekt inneholder komposisjonseffekter
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Avanserte komposisisjonseffekter, slik som sammensmelting eller gjennomsiktighet på vektorlaget er aktivert i dette prosjektet, dette innebærer at det ikke kan skrives ut som vektorer. Utskrift som raster er rekommendert.
- Print as raster
Skriv ut som raster
- Landscape
Liggende
@@ -16434,7 +16371,7 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Ctrl+Shift+G
-
QgsComposerItemWidget
- Frame color changed
Rammefarge endret
- Background color changed
Bakgrunnsfarge endret
- Item position changed
Objektets posisjon endret
- Item outline width
Objektomriss bredde
- Item frame join style
Elementramme forent stil
- Item frame toggled
Objektramme ble slått av/på
- Item background toggled
Objektbakgrunn ble slått av/på
- Select background color
Velg bakgrunnsfarge
- Select frame color
Velg rammefarge
- Item blend mode changed
Element blandingsmodus endret
- Item transparency changed
Element gjennomsiktighet endret
- Item id changed
Objektid endret
- Item rotation changed
Objektrotasjon endret
@@ -17170,115 +17107,104 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Globale innstillinger
- Position and size
Posisjon og størrelse
- Reference point
Referansepunkt
- X
X
- Y
Y
- Width
Bredde
- Height
Høyde
- Page
Side
- ...
- ...
-
-
- Rotation
Rotasjon
- °
°
- Frame
Ramme
- mm
mm
- Join style
Sammenføy stil
- Rendering
Rendering
- Blending mode
Blandingsmodus
- Thickness
Bredde
- Color...
Farge...
- Background
Bakgrunn
- Transparency
Gjennomsiktighet
- Item ID
Objekt-ID
- Id
Id
@@ -17311,18 +17237,18 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Etikettfarge endret
- Insert expression
Sett inn et uttrykk
- Label alignment changed
Etikettjustering endret
@@ -17428,8 +17354,9 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
QgsComposerLegend
+ Legend
- Tegnforklaring
+ Tegnforklaring
@@ -17594,12 +17521,12 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Tegnforklaringsgruppe lagt til
- Map %1
Kart %1
- None
Ingen
@@ -18029,107 +17956,100 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
QgsComposerMap
- Map %1
Kart %1
- Map will be printed here
Kartet skrives ut her
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Rendering
- Rectangle
Rektangel
- Solid
Ensfarget
- Cross
Kryss
- Markers
-
-
- Decimal
Desimal
- DegreeMinute
GraderMinutt
- DegreeMinuteSecond
GraderMinuttSekund
+ No frame
- Ingen ramme
+ Ingen ramme
- Zebra
Zebra
- Map scale changed
Målestokk endret
- Map rotation changed
Kartrotasjon endret
- Map extent changed
Kartutstrekning endret
- Select font color
Velg skriftfarge
@@ -18145,235 +18065,164 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Velg ruttenett rammefyllfarge
- Canvas items toggled
Kartvinduelemeter ble slått av/på
- None
Ingen
- Overview frame style changed
Oversikt rammestil endret
- Overview centering mode changed
Oversikt sentreringsmodus endret
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Kartenhet
-
-
- Millimeter
- Millimeter
-
-
- Centimeter
-
-
- change...
- endre...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Rutenett avkryssingsboks ble slått av/på
- Grid interval changed
Rutenettintervall endret
- Grid offset changed
Rutenettforskyving endret
- Grid line style changed
Rutenett-linjestil endret
- Grid type changed
Rutenetttype endret
+ Grid cross width changed
- Rutenett kryssbredde endret
+ Rutenett kryssbredde endret
- Annotation font changed
Merknadsskrift endret
+ Label font changed
- Påskrift skrifttype endret
+ Påskrift skrifttype endret
- Annotation distance changed
Merknadsavstand endret
- Annotation format changed
Merknadsformat endret
- Annotation toggled
Merknadstekst ble slått av/på
- Changed annotation precision
Endret merknadens presisjon
- Changed grid frame style
Endret rutenettets rammestil
+ Changed grid frame width
- Endret rutenettets rammebredde
+ Endret rutenettets rammebredde
- Changed grid frame line thickness
Endret rutenettrammens linjebredde
- Grid frame color changed
Rutenettets rammefarge endret
- Grid frame first fill color changed
Rutenettets første rammefyllfarge endret
- Grid frame second fill color changed
Rutenettets andre rammefyll farge endret
- Inside frame
Inni ramme
- Outside frame
Utenfor ramme
- Disabled
Deaktivert
- Horizontal
Horisontal
- Vertical
Vertikal
- Annotation position changed
Merknadsposisjon endret
- Changed annotation direction
Endret merknadens retning
- Map %1
Kart %1
@@ -18386,377 +18235,287 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Kartinnstillinger
- Map
Kart
- Main properties
Hovedegenskaper
- Update preview
Oppdater forhåndsvisning
- Scale
Målestokk
- Map rotation
Kartrotasjon
- Draw map canvas items
Tegn kartvinduobjekter
- Lock layers for map item
Lås lag til kartobjekt
- Extents
Utstrekninger
- X max
X maks
- Y min
Y min
- Y max
Y maks
- Set to map canvas extent
Sett til kartutstrekning
- X min
X min
- View extent in map canvas
Vis utstrekning i kartvinduet
- Controlled by atlas
Kontrollert av atlas
- Margin around feature
Marg rundt objekt
- %
%
- Fixed scale
Fast skala
- Use one of the predefined scales of the project where the atlas feature best fits.
Bruk en av de forhåndsdefinerte skalaene til prosjektet hvor atlasobjektet passer best.
- Predefined scale (best fit)
Forhåndsdefinert skala (beste tilpasning)
+ Show grid
- Vis rutenett
+ Vis rutenett
+ Grid &type
- Rutenett&type
+ Rutenett&type
- Offset
Forskyvning
- mm
mm
- Blend mode
Blandingsmodus
- Interval
Intervall
- Grid frame
Rutenettramme
- Frame size
Rammestørrelse
- Frame line thickness
Rammelinje bredde
- Color...
Farge...
- Frame fill colors
Ramme fyllfarger
- Marker style
- Markørstil
-
-
- Overview blending mode
Oversikt blandingsmodus
- Invert overview
Inverter oversikt
- Center on overview
Sentrer på oversikt
- X
X
- °
°
- Y
Y
- Cross width
Kryssbredde
- Frame style
Rammestil
- Line style
Linjestil
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Rutenetttype
-
-
- CRS
- CRS
-
-
- change...
endre...
- Interval units
-
-
- Map unit
- Kartenhet
-
-
- Millimeter
- Millimeter
-
-
- Centimeter
-
-
- No frame
- Ingen ramme
-
-
- Zebra
- Zebra
-
-
- Draw coordinates
Tegn koordinater
- Format
Format
- Left
Venstre
- Right
Høyre
- Top
Topp
- Bottom
Bunn
- Font
Skrifttype
- Font...
Skrifttype...
- Font color
- Skriftfarge
-
-
- Distance to map frame
Avstand til kartramme
- Coordinate precision
Koordinatpresisjon
- Font color...
Skriftfarge...
- Overview
Oversikt
- Overview frame
Oversiktsramme
- Overview style
Oversiktsstil
- Change...
Endre...
@@ -18797,18 +18556,18 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
QgsComposerPicture
- Picture expression parsing error: %1
Bildeuttrykk spaltingsfeil:%1
- Composer
Layout
- Picture expression eval error: %1
Bildeuttrykk vurdert feil:%1
@@ -18823,64 +18582,64 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Picture changed
Bilde endret
- Expression based image path
Uttrykksbasert bildesti
- Picture rotation changed
Bilderotasjon endret
- Select new preview directory
Velg ny forhåndsvisning mappe
- Picture resize mode changed
Endret størrelsesinnstilling for bilde
- Picture placement changed
Bildeplassering endret
- Picture source changed
Bildekilde endret
- Picture source expression
Bilde kildeuttrykk
- Rotation synchronisation toggled
Rotasjon synkronisering ble slått av/på
- Rotation map changed
Kartrotasjon endret
- Map %1
Kart %1
- Creating icon for file %1
Opprette ikon for fil %1
@@ -19047,32 +18806,32 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
QgsComposerScaleBar
- units
enheter
- km
km
- m
m
- miles
engelsk mil
- ft
ft
- Nm
Nm
@@ -19081,38 +18840,38 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
QgsComposerScaleBarWidget
Single Box
Enkel boks
Double Box
Dobbelboks
Line Ticks Middle
Enhetslinjer i midten
Line Ticks Down
Enhetslinjer nede
Line Ticks Up
Enhetslinjer oppe
Numeric
Numerisk
@@ -19152,144 +18911,119 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Nautiske mil
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Velg skriftfarge
-
-
- Select stroke color
-
-
- Map %1
Kart %1
- Scalebar map changed
Målestokkslinjens kart endret
- Scalebar line width
Målestokkslinjens linjebredde
- Scalebar segment size
Målestokkslinjens segmentstørrelse
- Scalebar segments left
Målestokkslinjens segment venstre
- Number of scalebar segments changed
Antall målestokkssegment endret
- Scalebar height changed
Målestokkslinjens høyde endret
- Scalebar font changed
Målestokkslinjens skrifttype endret
- Scalebar font color changed
Målestokkslinjens skriftfarge endret
- Scalebar color changed
Målestokkslinjens farge endret
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Målestokkslinjens strekfarge endret
- Scalebar unit text
Målestokkslinjens enhetstekst
- Scalebar map units per segment
Målestokkslinjens kartenheter per segment
- Scalebar style changed
Målestokkslinjens stil endret
- Scalebar label bar space
Målestokkslinjens påskriftsmellomrom
- Scalebar box content space
Målestokklinjens plass i inneholdsboks
- Scalebar alignment
Målestokkslinjens justering
- Scalebar changed to map units
Målestokkslinjen endret til kartenheter
- Scalebar changed to feet
Målestokkslinjen endret til fot
- Scalebar changed to nautical miles
Målestokkslinjen endret til nautiske mil
- Scalebar changed to meters
Målestokkslinjen endret til meter
- Scalebar line join style
Målestokkslinje sammnføyd stil
- Scalebar line cap style
Målestokkslinje avslutning
@@ -19432,11 +19166,6 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Secondary fill color...
-
-
- Stroke color...
Linjefarge...
@@ -19446,37 +19175,37 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Ellipse
Ellipse
Rectangle
Rektangel
Triangle
Trekant
- Shape style changed
Formstil endret
- Shape radius changed
Formradius endret
- Shape type changed
Formtype endret
@@ -19887,107 +19616,107 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
QgsComposition
- Label added
Påskrift lagt til
- Map added
Kart lagt til
- Arrow added
Pil lagt til
- Scale bar added
Målestokkslinje lagt til
- Shape added
Form lagt til
- Picture added
Bilde lagt til
- Legend added
Tegnforklaring lagt til
- Table added
Tabell lagt til
- Aligned items left
Justerte element venstre
- Aligned items horizontal center
Justerte element-horisontalt midten
- Aligned items vertical center
Justerte element-vertikal midten
- Aligned items right
Justerte element høyre
- Aligned items top
Justerte element topp
- Aligned items bottom
Justerte element bunn
- Items locked
Objekter låst
- Items unlocked
Objekter opplåst
- Item z-order changed
Elementets z-rekkefølge endret
- Remove item group
Fjern elementgruppe
- Frame deleted
Ramme slettet
- Item deleted
Element slettet
- Multiframe removed
Multiramme fjernet
@@ -20044,148 +19773,148 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Landscape
Liggende
Portrait
Stående
Map %1
Kart %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 tommer)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 tommer)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 tommer)
- ANSI C (17x22 in)
ANSI C (17x22 tommer)
- ANSI D (22x34 in)
ANSI D (22x34 tommer)
- ANSI E (34x44 in)
ANSI E (34x44 tommer)
- Arch A (9x12 in)
Arch A (9x12 tommer)
- Arch B (12x18 in)
Arch B (12x18 tommer)
- Arch C (18x24 in)
Arch C (18x24 tommer)
- Arch D (24x36 in)
Arch D (24x36 tommer)
- Arch E (36x48 in)
Arch E (36x48 tommer)
- Arch E1 (30x42 in)
Arch E1 (30x42 tommer)
- Custom
Egendefinert
@@ -20203,131 +19932,109 @@ Vennligst prøv en lavere oppløsning eller et mindre papirformat
Papir og kvalitet
- Presets
Papirstørrelse
- ...
- ...
-
-
- Width
Bredde
- Height
Høyde
- Units
Enheter
- Number of pages
Antall sider
- Orientation
Orientering
- Export resolution
Eksportoppløsning
- Print as raster
Skriv ut som raster
-
- Snap tolerance
- Festetoleranse
-
-
- px
- px
-
Change...
Endre...
- Page background
Sidebakgrunn
+ Grid
- Rutenett
+ Rutenett
- dpi
dpi
- World file on
World-fil er på
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Rutenettforskyving
- x:
x:
- y:
y:
+ Spacing
- Mellomrom
+ Mellomrom
+ Snap to alignments
- Fest til justeringslinjer
+ Fest til justeringslinjer
+ Tolerance
- Toleranse
+ Toleranse
@@ -21504,9 +21211,9 @@ eksisterende CRS
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Kunne ikke sette kolonne '%1' som forhåndsvisningskolonne.
@@ -23568,7 +23275,7 @@ Fortolkerfeil:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23581,7 +23288,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24684,7 +24391,7 @@ MyForms.py må finnes med i PYTHONPATH, qgis/python eller i prosjektets mappe.<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26001,7 +25708,7 @@ Velg en gyldig fil.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26953,17 +26660,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Symbol
- Value
Verdi
- Label
Påskrift
@@ -27056,41 +26763,41 @@ p, li { white-space: pre-wrap; }
Avansert
- Symbol levels...
Symbolnivå...
- Error
Feil
- There are no available color ramps. You can add them in Style Manager.
Der er ingen tilgjengelige fargerramper. Du kan legge til dem i Stilartstyring.
- The selected color ramp is not available.
Den valgte fargerampen er ikke tilgjenlig.
- Warning
Advarsel
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
Naturlig brytepunktsklassifikasjon (Jenks) er O(n2) kompleks, din klassifikasjon kan ta lang tid.
Trykk avbryt for å avbryte beregningen eller OK for å fortsette.
- Renderer creation has failed.
Opptegning misslyktes.
@@ -27274,10 +26981,7 @@ Trykk avbryt for å avbryte beregningen eller OK for å fortsette.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Er du sikker på at du vil slette %n valgt lag?
- Er du sikker på at du vil slette %n valgte lag?
-
+ Er du sikker på at du vil slette %n valgt lag? Er du sikker på at du vil slette %n valgte lag?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29032,7 +28736,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29071,7 +28775,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29133,7 +28837,7 @@ p, li { white-space: pre-wrap; }
<p align="center">Existing mapsets</p>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29910,10 +29614,7 @@ på linje %2 kolonne %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Der er forsatt %n ubehandlet lag, som vil gå tapt hvis du lukket nå.
- Der er forsatt %n ubehandlet lag, som vil gå tapt hvis du lukket nå.
-
+ Der er forsatt %n ubehandlet lag, som vil gå tapt hvis du lukket nå. Der er forsatt %n ubehandlet lag, som vil gå tapt hvis du lukket nå.
@@ -30043,12 +29744,9 @@ på linje %2 kolonne %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Nettverket fikk tidsavbrudd etter %n sekund inaktivitet.
-Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
- Nettverket fikk tidsavbrudd etter %n sekunder inaktivitet.
-Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
-
+ Nettverket fikk tidsavbrudd etter %n sekund inaktivitet.
+Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren. Nettverket fikk tidsavbrudd etter %n sekunder inaktivitet.
+Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
@@ -30255,7 +29953,7 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
No attributes.
-
- Label this layer with
Sett påskrift på dette laget med
@@ -31323,22 +31021,22 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
...
...
@@ -31394,7 +31092,7 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.Flere linjer
- Automated placement settings (apply to all layers)
Instillinger for automatisk plassering (gjelder for alle lag)
@@ -31424,7 +31122,7 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
Rendering
Opptegning
@@ -31512,7 +31210,7 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
Alignment
Justering
@@ -31549,7 +31247,7 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.Gjenta
- Discourage labels from covering features
Forhindre påskrifter i å dekke objekter
@@ -31644,82 +31342,82 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.Buffer
- Labels will not show if larger than this on screen
Påskrifter vil ikke bli vist hvis de er større enn dette på skjermen
- px
px
- Data defined
Datadefinert
- X
X
- Y
Y
- Coordinate
Koordinat
- Preserve data rotation values
Bevar datarotasjonsverdier
- horizontal
horisontal
- vertical
vertikal
- Label options
Påskriftsinnstillinger
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Verdi < 0 representerer en skala tettere enn 1:1, f.eks. -10 = 10:1. <br> Verdien 0 deaktiverer denne spesifikke begrensningen.
- Maximum
Maksimum
- Pixel size-based visibility (labels in map units)
Pikselstørrelse-basert synlighet (påskrifter i kartenheter)
- Labels will not show if smaller than this on screen
Påskrifter vil ikke bli vist hvis de er mindre enn dette på skjermen
- Minimum
Minimum
@@ -31729,7 +31427,7 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.<
- Scale-based visibility
Skalbasert synlighet
@@ -31767,17 +31465,17 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.Motsatt retning
- Priority
Prioritet
- Low
Lav
- High
Høy
@@ -31930,7 +31628,7 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
Rotation
Rotasjon
@@ -31982,17 +31680,17 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.Avstand
- outside
utenfor
- inside
inni
- Maximum angle between curved characters
Maksimumsvinkel mellom kurvede tegn
@@ -32098,62 +31796,62 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.symbolenheter
- Merge connected lines to avoid duplicate labels
Slå sammen linjer med kontakt for å unngå duplisering av påskrifter
- Label every part of multi-part features
Sett påskrift på hver del i flerdelsobjekter
- Feature options
Objektinnstillinger
- Suppress labeling of features smaller than
Undertrykk påskrifter på objekter mindre enn
- mm
mm
- Show all labels for this layer (including colliding labels)
Vis alle påskrifter for dette lag (inkludert kolliderende påskrifter)
- Show upside-down labels
Vis opp-ned påskrifter
- never
aldri
- when rotation defined
når rotasjon er definert
- always
alltid
- Limit number of features to be labeled to
Begrens antall objekter som skal ha påskrift
- Number of features sent to labeling engine, though not all may be labeled
Antall objekter sendt til påskriftsmotor, selv om kanskje ikke alle får påskrift
@@ -32163,17 +31861,17 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.Posisjon
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Avmarkér for å skrive rotasjon utledet av påskriftverktøy, og NULL ved frigjøring
- Always show
Vis alltid
- Show label
Vis påskrift
@@ -32189,12 +31887,12 @@ Dette kan være et problem med din nettverkstilkobling eller på WMS-serveren.
QgsLayerTreeModel
- Double-click to view legend
Dobbeltklikk for å vise tegnforklaring
- following %1 items
not displayed
følgende %1 objekter vises ikke
@@ -32251,12 +31949,12 @@ not displayed
QgsLegendModel
- Group
Gruppe
- No Legend Available
Ingen tegnforklaring tilgjengelig
@@ -32484,18 +32182,18 @@ not displayed
QgsMapCanvas
- canvas
kartvindu
- Rendering
Rendering
- Canvas refresh: %1 ms
Kartvinduoppdatering: %1 ms
@@ -32581,7 +32279,7 @@ not displayed
Style not found in database
-
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
An error occured during splitting.
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
An error occured during splitting.
-
%n more
unread messages
-
- %n mer
- %n mer
-
+ %n mer %n mer
@@ -33820,14 +33515,14 @@ not displayed
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Forbindelsen mislyktes - vertsnavn er ikke angitt.
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Forbindelse mislyktes - Databasenavn er ikke angitt.
@@ -35382,10 +35077,7 @@ Detaljert feilinformasjon:
Coordinate Reference System (%n available)
crs count
-
- Koordinatsystem (%n tilgjengelig)
- Koordinatsystem (%n tilgjengelig)
-
+ Koordinatsystem (%n tilgjengelig) Koordinatsystem (%n tilgjengelig)
Solid
Dekkende
Dots
Prikker
Crosses
Kryss
- Detected active locale on your system: %1
Fant aktivt sted på ditt system: %1
- To vertex
Til knutepunkt
- To segment
Til segment
- To vertex and segment
Til knutepunkt og segment
- map units
kartenheter
- pixels
piksler
- Semi transparent circle
Semitransparent sirkel
- Cross
Kryss
- None
Ingen
- QGIS files
QGIS-filer
- Off
Av
- QGIS
QGIS
- GEOS
GEOS
- Round
Rund
- Mitre
Gjæring
- Bevel
Fase
- Save default project
Lagre standardprosjekt
- You must set a default project
Du må sette et standardprosjekt
- Current project saved as default
Nåværende prosjekt lagret som standard
- Error saving current project as default
Feil ved lagring av nåværende prosjekt som standard
- Choose a directory to store project template files
Velg en mappe for å lagre prosjektmalsfiler
@@ -36514,105 +36206,105 @@ Alltid nettverk: last alltid fra nettverk og sjekk ikke om hurtiglageret har en
Vis objekter synlige på kart
- Choose project file to open at launch
Velg en prosjektfil, som skal åpnes ved start
- Create Options - %1 Driver
Innstillinger for opprettelse: - %1-driver
- Create Options - pyramids
Innstillinger for opprettelse- pyramider
- Restore UI defaults
Reparer UI-standarder
- Are you sure to reset the UI to default (needs restart)?
Er du sikker på at du vil nullstille UI til standard (trenger omstart)?
- Overwrite
Overskriv
- If Undefined
Hvis udefineret
- Unset
Ikke satt
- Prepend
Foranstill
- Append
Tilføy
- Choose a directory
Velg en mappe
- Enter scale
Angi skala
- Scale denominator
Skalavgrenser
- Load scales
Last skalaer
- XML files (*.xml *.XML)
XML-filer (*.xml *.XML)
- Save scales
Lagre skalaer
- No Stretch
Ingen utstrekning
- Stretch To MinMax
Strekk ut til MinMaks
- Stretch And Clip To MinMax
Strekk ut og klipp til MinMaks
- Clip To MinMax
Klipp til MinMaks
@@ -36632,7 +36324,7 @@ Alltid nettverk: last alltid fra nettverk og sjekk ikke om hurtiglageret har en
General
Generelt
@@ -36815,7 +36507,7 @@ Alltid nettverk: last alltid fra nettverk og sjekk ikke om hurtiglageret har en
...
...
@@ -36931,7 +36623,7 @@ Alltid nettverk: last alltid fra nettverk og sjekk ikke om hurtiglageret har en
Remove
Fjern
@@ -36939,7 +36631,7 @@ Alltid nettverk: last alltid fra nettverk og sjekk ikke om hurtiglageret har en
Add
Legg til
@@ -37199,22 +36891,7 @@ Alltid nettverk: last alltid fra nettverk og sjekk ikke om hurtiglageret har en
Minimum linje/omrissbredde i millimeter.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Forhindre at attributtvinduet vises etter hvert opprettet objekt
@@ -37511,18 +37188,22 @@ Alltid nettverk: last alltid fra nettverk og sjekk ikke om hurtiglageret har en
Farge...
+ Grid defaults
- Standarder for rutenett
+ Standarder for rutenett
+ Spacing
- Mellomrom
+ Mellomrom
mm
mm
@@ -37543,370 +37224,372 @@ Alltid nettverk: last alltid fra nettverk og sjekk ikke om hurtiglageret har en
Snap tolerance
Festetoleranse
+ Guide defaults
- Standard for hjelpelinjer
+ Standard for hjelpelinjer
- Feature creation
Opprettelse av objekter
- Validate geometries
Valider geometrier
- Reuse last entered attribute values
Gjenbruk siste angitte attributtverdier
- Rubberband
Strikk
- Line color
Linjefarge
- Line width in pixels
Linjebredde i pikseler
- Line width
Linjebredde
- Snapping
Festing
- Default snap mode
Standard festemodus
- Default snapping tolerance
Standard festeområde
- Search radius for vertex edits
Søkeradius for knutepunktredigeringer
- map units
kartenheter
pixels
piksler
- Open snapping options in a dock window (QGIS restart required)
Åpne feste-muligheter i et forankret vindu (krever QGIS-omstart)
- Vertex markers
Knutepunktmarkører
- Marker style
Markørstil
- Marker size
Markørstørrelse
- Show markers only for selected features
Vis markør kun for valgt objekter
- Curve offset tool
Kurveoffsett-verktøy
- Miter limit
Gjæringsgrense
- Join style
Sammenføyningsstil
- Quadrant segments
Kvadrantsegment
- GDAL driver options
GDAL-driverinnstillinger
- Edit Pyramids Options
Rediger pyramidinnstillinger
- Edit Create Options
Rediger innstillinger for opprettelse
- GDAL drivers
GDAL-drivere
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
I noen tilfeller kan mer enn en GDAL-driverbrukestil å lese inn det samme rasterformatet. Bruk listen nedenfor for å angi hvilken som skal brukes.
- Name
Navn
- ext
ext
- Flags
Flagg
- Description
Beskrivelse
- CRS for new layers
Koordinatsystem for nye lag
- Select...
Velg...
- Use &project CRS
Bruk &prosjektets referansekoordinatsystem
- Prompt for &CRS
Spør etter &referansekoordinatsystem
- Use default CRS displa&yed below
Bruk &standard referansekoordinatsystem som &vist nedenfor
- When a new layer is created, or when a layer is loaded that has no CRS
Når et nytt lag opprettes, eller når et lag leses inn som ikke har et definert koordinatsystem
- Default CRS for new projects
Standard referansekoordinatsystem for nye prosjekter
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Aktiver automatisktransformasjon av koordinater dersom et nytt lag har et annet referansekoordinatsystem enn de(t) lag som allerede er der. Nåværende lags referansekoordinatsystem vil bli brukt.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Aktiver automatisk koordinatsystemtransformasjon dersom lag har ulike koordinatsystem
- Always start new projects with this CRS
Start alltid nye prosjekt med dette CRS
- Enable 'on the &fly' reprojection by default
Aktiver automatisk CRS-trans&formasjon
- Don't enable 'on the fly' reprojection
Aktiver ikke automatisk koordinattransformasjon
- Default datum transformations
Standard datumtransformasjoner
- Source CRS
Kilde-referansekoordinatsystem
- Destination CRS
Mål-referansekoordinatsystem
- Source datum transform
Kildedatumtransformasjon
- Destination datum transform
Måldatumtransformasjon
- Ask for datum transformation when no default is defined
Spør etter datumtransformasjon når ingen standarder er satt
- Override system locale
Tilsidesett systemlokalisering
- Locale to use instead
Lokalisering som skal brukes istedet
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>NB:</b> Det kreves en omstart av programmet for å endre systemets lokalisering
- Additional Info
Ytterligere informasjon
- Detected active locale on your system:
Fant aktiv lokalisering for ditt system:
- WMS search address
WMS-søkeadresse
- Timeout for network requests (ms)
Tidsavbrudd for nettverksforespørseler (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Standardutløpsperiode for WMS-C/WMTS tiles (timer)
- Max retry in case of tile request errors
Maksimalt antall forsøk ved tile-forespørsel
- User-Agent
Brukeragent
- Cache settings
Hurtiglagerinnstillinger
- Directory
Mappe
- Size [KiB]
Størrelse [KiB]
- Clear
Rydd
- Use proxy for web access
Bruk mellomtjener til internettilgang
- Host
Vert
- Port
Port
- User
Bruker
- Leave this blank if no proxy username / password are required
La dette stå tomt hvis ingen mellomtjener brukernavn / passord er påkrevd
- Password
Passord
- Proxy type
Mellomtjenertype
- Exclude URLs (starting with)
Ekskluder URLer (starter med)
@@ -38626,7 +38309,7 @@ SQL: %2
Could not reload fields.
-
Programtillegg har forsvunnet
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
Programtillegget ser ut til å ha blitt installert, men jeg vet ikke hvor. Antagelig inneholdt programtilleggspakken en katalog med feilaktig navn.
Søk i listen for installerte programtillegg. Jeg er nesten sikker på at du finner programtillegget der, men jeg kan ikke oppdage hvilket det er. Det betyr at jeg ikke kan informere om tilgjengelige oppdateringer. Kontakt forfatteren til programtillegget og rapporter problemet.
@@ -40608,7 +40291,7 @@ Du må starte QGIS på nytt for å laste det.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40626,7 +40309,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40644,7 +40327,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41505,156 +41188,156 @@ Velg ignorer for å fortsette innlesning uten de manglende lag. Velg avbryt for
QgsProjectProperties
- Layer
Lag
- Type
Type
- Identifiable
Identifiserbare
- Vector
Vektor
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
Koordinatsystem
- No coordinate systems selected. Disabling restriction.
Ingen koordinatsystemer valgt. Deaktiverer begrensning.
- Selection color
Utvalg farge
- Measure tool (CRS transformation: %1)
Måleverktøy (CRS transformasjon: %1)
- Canvas units (CRS transformation: %1)
Kartvinduenheter (CRS transformasjon: %1)
+ OFF
AV
+ ON
PÅ
- CRS %1 was already selected
CRS %1 var allerede valgt
- Coordinate System Restrictions
Koordinatsystembegrensninger
- The current selection of coordinate systems will be lost.
Proceed?
Nåværende valg av koordinatsystemer vil gå tapt.
Fortsette?
- Select print composer
Velg en utskriftslayout
- Composer Title
Layouttittel
- Select restricted layers and groups
Velg begrensede lag og grupper
- Enter scale
Angi skala
- Scale denominator
Skalaavgrenser
- Load scales
Last skalaer
- XML files (*.xml *.XML)
XML-filer (*.xml *.XML)
- Save scales
Lagre skalaer
- Select a valid symbol
Velg et gyldig symbol
- Invalid symbol :
Ugyldig symbol :
- Parameters:
Parametre:
+ Select %1 from pull-down menu to adjust radii
Velg %1 fra nedtrekksmenyen for å justere radius
- Can only use ellipsoidal calculations when CRS transformation is enabled
Kan kun bruke elliptiske beregninger når CRS-transformeringer er aktivert
@@ -41679,7 +41362,6 @@ Fortsette?
Project title
Prosjekttittel
@@ -41719,37 +41401,37 @@ Fortsette?
Lagre stier
- Measure tool
Måleverktøy
- Semi-minor
Lille halvakse
- Semi-major
Store halvaksel
- Used when CRS transformation is turned off
Brukes når CRS-transformasjonen er slått av
- Canvas units
Kartvinduenheter
- Meters
Meter
- Feet
Fot
@@ -41781,98 +41463,98 @@ Fortsette?
OWS-tjener
- Ellipsoid
(for distance calculations)
Ellipsoide
(for avstandsberegninger)
- Degree
Grad
- Degree display
Visning av grader
- Decimal degrees
Desimalgrader
- Degrees, Minutes
Grader, minutter
- Degrees, Minutes, Seconds
Grader, minutter, sekunder
- Precision
Presisjon
- Automatically sets the number of decimal places in the mouse position display
Setter automatisk antall desimaler ved visning av musens posisjon
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Antallet desimalplasser som brukes når visning av musens posisjon settes automatisk slik at forflytning av musen med én piksel endrer vist posisjon
- Automatic
Automatisk
- Sets the number of decimal places to use for the mouse position display
Setter antall desimaler ved visning av musens posisjon
- Manual
Manuelt
- The number of decimal places for the manual option
Antall desimaler ved valg 'manuelt'
- decimal places
desimalplasser
- Project scales
Prosjektskalaer
- ...
...
- Enable 'on the fly' CRS transformation
Aktiver automatisk CRS-transformasjon
@@ -41882,69 +41564,69 @@ Fortsette?
Identifiserbare lag
- Project layers
Prosjektlag
- Layer
Lag
- Type
Type
- Identifiable
Identifiserbare
- Marker
Markør
- Line
Linje
- Default symbols
Standardsymboler
- Fill
Fyll
- Color Ramp
Fargerampe
- Transparency
Gjennomsiktighet
- %
%
- Style Manager
Stilstyring
- Options
Innstillinger
@@ -41954,170 +41636,165 @@ Fortsette?
Relasjoner
- Project file
- Prosjektfil
-
-
- Nautical miles
Nautiske mil
- Assign random colors to symbols
Tildel tilfeldige farger til symboler
- Service capabilities
Tjenesteevner
- Person
Person
- Title
Tittel
- Organization
Organisasjon
- Online resource
Online ressurs
- E-Mail
E-post
- Phone
Telefon
- Abstract
Abstrakt
- Fees
Avgifter
- Access constraints
Tilgangsbegrensninger
- Keyword list
Nøkkelordliste
- WMS capabilities
WMS-egenskaper
- Add geometry to feature response
Legg til geometri til objektrespons
- Min. X
Min. X
- Min. Y
Min. Y
- Max. X
Maks. X
- Max. Y
Maks. Y
- Use Current Canvas Extent
Bruk nåværende kartvinduutstrekning
- Used
Brukt
- Exclude composers
Ekskluder layouter
- WFS capabilities
WFS-egenskaper
- WCS capabilities
WCS-egenskaper
- Exclude layers
Ekskluder lag
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
Kvalitet for JPEG-bilder (10: mindre bild - 100 : beste kvalitet)
- Published
Publisert
- Update
Oppdater
- Insert
Legg til
- Delete
Slett
- Unselect all
Fravelg alle
- Select all
Velg alle
@@ -42128,39 +41805,39 @@ Fortsette?
Makroer
- Advertised URL
Annonsert URL
- Width
Bredde
- Height
Høyde
- Maximums for GetMap request
Maksimum for GetMap forespørseler
- Advertised extent
Annonsert utstrekning
- CRS restrictions
CRS-begrensninger
- Python macros
Python-makroer
@@ -42274,10 +41951,7 @@ Derfor vil projeksjonsvelgeren ikke fungere...
The where clause returned %n row(s).
returned test rows
-
- Hvor-setningen returnerte %n rad.
- Hvor-setningen returnerte %n rader.
-
+ Hvor-setningen returnerte %n rad. Hvor-setningen returnerte %n rader.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42350,7 +42024,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42361,7 +42035,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42377,7 +42051,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -44043,7 +43717,7 @@ Klikk på hjelpeknappen for å få gyldige opprettelsesmuligheter for dette form
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45052,7 +44726,7 @@ standardavvik ×
(no selection)
- (ingen utvalg)
+
Filter returned %n feature(s)
number of filtered features
-
- Filter returnerte %n objekt
- Filter returnerte %n objekter
-
+ Filter returnerte %n objekt Filter returnerte %n objekter
@@ -45814,10 +45485,7 @@ standardavvik ×
Found %n matching feature(s).
test result
-
- Fant %n samsvarende objekt.
- Fant %n samsvarende objekter.
-
+ Fant %n samsvarende objekt. Fant %n samsvarende objekter.
Validation finished (%n error(s) found).
number of geometry errors
-
- Validering ferdig (%n feil funnet).
- Validering ferdig (%n feil funnet).
-
+ Validering ferdig (%n feil funnet). Validering ferdig (%n feil funnet).
%n selected geometries
selected geometries
-
- %n valgt geometri
- %n valgte geometrier
-
+ %n valgt geometri %n valgte geometrier
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47372,7 +47034,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47986,8 +47648,8 @@ Vil du overskrive [%2]-relasjonen?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -48024,124 +47686,152 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Kunne ikke laste grensesnitt
+ Kunne ikke laste grensesnitt
+ Failed to connect to database
- Tilkobling til databsen mislyktes
+ Tilkobling til databsen mislyktes
+ A connection to the SQL Anywhere database cannot be established.
- En forbindelse til SQL Anywhere-databasen kan ikke opprettes.
+ En forbindelse til SQL Anywhere-databasen kan ikke opprettes.
+ No suitable key column
- Ingen brukbar nøkkelkolonne
+ Ingen brukbar nøkkelkolonne
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- Kilderelasjonen %1 har ingen kolonne, som er egnet til å være unik nøkkel.
+ Kilderelasjonen %1 har ingen kolonne, som er egnet til å være unik nøkkel.
QGIS krever at relasjonen har en heltallskolonne ikke større enn 32 bits, som inneholder unike verdier.
+ Error loading attributes
- Feil ved lasting av egenskaper
+ Feil ved lasting av egenskaper
+ Ambiguous field!
- Tvetydig felt!
+ Tvetydig felt!
+ Duplicate field %1 found
- Duplikatfelt %1 funnet
+ Duplikatfelt %1 funnet
+ Read attempt on an invalid SqlAnywhere data source
- Leseforsøk på en ugyldig SqlAnywhere-datakilde
+ Leseforsøk på en ugyldig SqlAnywhere-datakilde
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Feil ved innsetting av objekter
+ Feil ved innsetting av objekter
+ Error deleting features
- Feil ved sletting av objekter
+ Feil ved sletting av objekter
+ Error adding attributes
- Feil ved tilføyelse av egenskaper
+ Feil ved tilføyelse av egenskaper
+ Error deleting attributes
- Feil ved sletting av egenskaper
+ Feil ved sletting av egenskaper
+ Attribute not found
- Egenskap ikke funnet
+ Egenskap ikke funnet
+ Error updating attributes
- Feil ved oppdatering av egenskaper
+ Feil ved oppdatering av egenskaper
+ Error updating features
- Feil ved oppdatering av objekter
+ Feil ved oppdatering av objekter
+ Error verifying geometry column %1
- Feil ved bekreftelse av geometrikolonne %1
+ Feil ved bekreftelse av geometrikolonne %1
+ Unknown geometry type
- Ukjent geometritype
+ Ukjent geometritype
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- Kolonne %1 har en geometritype av %2, som QGIS ikke støtter ennå.
+ Kolonne %1 har en geometritype av %2, som QGIS ikke støtter ennå.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- Kolonne %1 er ikke begrenset til et enkelt SRID, som QGIS krever.
+ Kolonne %1 er ikke begrenset til et enkelt SRID, som QGIS krever.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Fordi QGIS ikke støtter kun plandata, vil SQL Anywhere datatilbyderen transformere dataene til den kompatible planprojeksjonen (SRID=%1).
+ Fordi QGIS ikke støtter kun plandata, vil SQL Anywhere datatilbyderen transformere dataene til den kompatible planprojeksjonen (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Fordi QGIS støtter kun plandata og ingen kompatible planprojeksjoner ble funnet, vil SQL Anywhere-tilbyderen prøve å transformere dataene til planprojeksjonen WGS 84 (SRID=%1).
+ Fordi QGIS støtter kun plandata og ingen kompatible planprojeksjoner ble funnet, vil SQL Anywhere-tilbyderen prøve å transformere dataene til planprojeksjonen WGS 84 (SRID=%1).
+ Mixed Spatial Reference Systems
- Blandede koordinatsystemer
+ Blandede koordinatsystemer
+ Error checking database ReadOnly property
- Feil ved sjekking av databasens skrivebeskyttende egenskap
+ Feil ved sjekking av databasens skrivebeskyttende egenskap
+ Error loading SRS definition
- Feil ved innlesning av CRS-definisjon
+ Feil ved innlesning av CRS-definisjon
+ Limited Support of Round Earth SRS
- Begrenset støtte av Rund Jord SRS
+ Begrenset støtte av Rund Jord SRS
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- Kolonne %1 (%2) inneholder geometrier, som tilhører et rund-jord koordinatsystem (SRID=%3). %4
+ Kolonne %1 (%2) inneholder geometrier, som tilhører et rund-jord koordinatsystem (SRID=%3). %4
Oppdateringer av geometriverdier vil bli slått av og forespørselsyteevnen kan være dårlig, da romlige indekser ikke brukes. For å forbedre yteevnen bør det opprettes et romlig indeks på en ny (muligvis beregnet) kolonne, som inneholder en planprojeksjon med disse geometrier. Referer til beskrivelsen av ST_SRID(INT) - og ST_Transform(INT)-metodene i SQL Anywhere-dokumentasjonen for hjelp.
@@ -48276,14 +47966,14 @@ Oppdateringer av geometriverdier vil bli slått av og forespørselsyteevnen kan
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Symbol med navn '%1' finnes allerede.
Overskriv?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Fargeramp med navn '%1' finnes allerede.
Overskriv?
@@ -48532,22 +48222,22 @@ Overskriv?
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50191,37 +49881,25 @@ Feilen var: %2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- SUKSESS: %n attributt slettet.
- SUKSESS: %n attributter slettet.
-
+ SUKSESS: %n attributt slettet. SUKSESS: %n attributter slettet.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- FEIL: %n attributt ikke slettet.
- FEIL: %n attributt er ikke slettet.
-
+ FEIL: %n attributt ikke slettet. FEIL: %n attributt er ikke slettet.
SUCCESS: %n attribute(s) added.
added attributes count
-
- SUKSESS: %n attributt lagt til.
- SUKSESS: %n attributter lagt til.
-
+ SUKSESS: %n attributt lagt til. SUKSESS: %n attributter lagt til.
ERROR: %n new attribute(s) not added
not added attributes count
-
- FEIL: %n ny attributt ikke lagt til
- FEIL: %n nye attributter ikke lagt til
-
+ FEIL: %n ny attributt ikke lagt til FEIL: %n nye attributter ikke lagt til
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- SUKSESS: %n attributtverdi endret.
- SUKSESS: %n attributtverdier endret.
-
+ SUKSESS: %n attributtverdi endret. SUKSESS: %n attributtverdier endret.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- FEIL: %n attributtverdiendring ikke lagret.
- FEIL: %n attributtverdiendringer ikke lagret.
-
+ FEIL: %n attributtverdiendring ikke lagret. FEIL: %n attributtverdiendringer ikke lagret.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- SUKSESS: %n objekt slettet.
- SUKSESS: %n objekter slettet.
-
+ SUKSESS: %n objekt slettet. SUKSESS: %n objekter slettet.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- FEIL: %n objekt ikke slettet.
- FEIL: %n objekter ikke slettet.
-
+ FEIL: %n objekt ikke slettet. FEIL: %n objekter ikke slettet.
SUCCESS: %n feature(s) added.
added features count
-
- SUKSESS: %n objekt lagt til.
- SUKSESS: %n objekter lagt til.
-
+ SUKSESS: %n objekt lagt til. SUKSESS: %n objekter lagt til.
ERROR: %n feature(s) not added.
not added features count
-
- FEIL: %n objekt ikke lagt til.
- FEIL: %n objekter ikke lagt til.
-
+ FEIL: %n objekt ikke lagt til. FEIL: %n objekter ikke lagt til.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- FEIL: %n objekt ikke lagt til - tilbyder støtter ikke tilføyelse av objekter.
- FEIL: %n objekter ikke lagt til - tilbyder støtter ikke tilføyelse av objekter.
-
+ FEIL: %n objekt ikke lagt til - tilbyder støtter ikke tilføyelse av objekter. FEIL: %n objekter ikke lagt til - tilbyder støtter ikke tilføyelse av objekter.
SUCCESS: %n geometries were changed.
changed geometries count
-
- SUKSESS: %n geometri endret.
- SUKSESS: %n geometrier endret.
-
+ SUKSESS: %n geometri endret. SUKSESS: %n geometrier endret.
ERROR: %n geometries not changed.
not changed geometries count
-
- FEIL: %n geometri ikke endret.
- FEIL: %n geometrier ikke endret.
-
+ FEIL: %n geometri ikke endret. FEIL: %n geometrier ikke endret.
Options (%n coordinate reference systems available)
crs count
-
- Innstillinger (%n koordinatsystem tilgjengelig)
- Innstillinger (%n koordinatsystem tilgjengelig)
-
+ Innstillinger (%n koordinatsystem tilgjengelig) Innstillinger (%n koordinatsystem tilgjengelig)
Coordinate Reference System (%n available)
crs count
-
- Koordinatsystem (%n tilgjengelig)
- Koordinatsystem (%n tilgjengelige)
-
+ Koordinatsystem (%n tilgjengelig) Koordinatsystem (%n tilgjengelige)
%n Layer(s) selected
selected layer count
-
- %n lag valgt
- %n lag valgte
-
+ %n lag valgt %n lag valgte
(and %n more)
crs
-
- (og %n mer)
- (og %n mer)
-
+ (og %n mer) (og %n mer)
%n tile requests in background
tile request count
-
- %n flis forespørsel i bakgrunnen
- %n fliser forespørsler i bakgrunnen
-
+ %n flis forespørsel i bakgrunnen %n fliser forespørsler i bakgrunnen
, %n cache hits
tile cache hits
-
- , %n hurtiglager treff
- , %n hurtiglager treff
-
+ , %n hurtiglager treff , %n hurtiglager treff
, %n cache misses.
tile cache missed
-
- , %n hurtiglager tapt.
- , %n hurtiglager tapt.
-
+ , %n hurtiglager tapt. , %n hurtiglager tapt.
, %n errors.
errors
-
- , %n feil.
- , %n feil.
-
+ , %n feil. , %n feil.
(and %n more)
crs
-
- (og %n til)
- (og %n til)
-
+ (og %n til) (og %n til)
%n missing row(s)
-
- %n manglende rad
- %n manglende rader
-
+ %n manglende rad %n manglende rader
%n missing column(s)
-
- %n manglende kolonne
- %n manglende kolonner
-
+ %n manglende kolonne %n manglende kolonner
%n tile requests in background
tile request count
-
- %n flis forespørsel i bakgrunnen
- %n fliser forespørsler i bakgrunnen
-
+ %n flis forespørsel i bakgrunnen %n fliser forespørsler i bakgrunnen
, %n cache hits
tile cache hits
-
- , %n hurtiglager treff
- , %n hurtiglager treff
-
+ , %n hurtiglager treff , %n hurtiglager treff
, %n cache misses.
tile cache missed
-
- , %n hurtiglagerbom.
- , %n hurtiglagerbommer.
-
+ , %n hurtiglagerbom. , %n hurtiglagerbommer.
, %n errors.
errors
-
- , %n feil.
- , %n feil.
-
+ , %n feil. , %n feil.
SaDbTableModel
+ Schema
- Skjema
+ Skjema
+ Table
- Tabell
+ Tabell
+ Type
- Type
+ Type
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Linjetolkning
+ Linjetolkning
+ Geometry column
- Geometrikolonne
+ Geometrikolonne
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Lagre forbindelse
+ Lagre forbindelse
+ Should the existing connection %1 be overwritten?
- Skal den eksisterende forbindelsen %1 overskrives?
+ Skal den eksisterende forbindelsen %1 overskrives?
+ Failed to load interface
- Kunne ikke laste grensesnitt
+ Kunne ikke laste grensesnitt
+ Test connection
- Test forbindelse
+ Test forbindelse
+ Connection to %1 was successful
- Tilkobling til %1 var vellykket
+ Tilkobling til %1 var vellykket
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Tilkobling mislyktes - sjekk innstillinger og prøv igjen.
+ Tilkobling mislyktes - sjekk innstillinger og prøv igjen.
SQL-Anywhere feilkode: %1
Detaljert feilinformasjon: %2
@@ -53625,277 +53245,349 @@ Detaljert feilinformasjon: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Opprett ny SQL Anywhere-forbindelse
+ Opprett ny SQL Anywhere-forbindelse
+ Connection Information
- Forbindelsesinformasjon
+ Forbindelsesinformasjon
+ Name
- Navn
+ Navn
+ Host
- Vert
+ Vert
+ Port
- Port
+ Port
+ Server
- Tjener
+ Tjener
+ Database
- Database
+ Database
+ Connection Parameters
- Forbindelsesparametre
+ Forbindelsesparametre
+ Username
- Brukernavn
+ Brukernavn
+ Password
- Passord
+ Passord
+ Name of the new connection
- Navn på den nye forbindelsen
+ Navn på den nye forbindelsen
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Navn eller IP-adresse på datamaskinen, som hoster databaseserveren (la den være tom for lokale forbindelser)
+ Navn eller IP-adresse på datamaskinen, som hoster databaseserveren (la den være tom for lokale forbindelser)
+ Port number used by the database server (leave blank for default 2638)
- Portnummer brukt av databaseserveren (la den være tom for standard 2638)
+ Portnummer brukt av databaseserveren (la den være tom for standard 2638)
+ Name of the database server (leave blank for default server on host)
- Navn på databaseserveren (la den være tom for standardserver på vert)
+ Navn på databaseserveren (la den være tom for standardserver på vert)
+ Name of the database (leave blank for default database on server)
- Navn på databasen (la den være tom for standarddatabase på server)
+ Navn på databasen (la den være tom for standarddatabase på server)
+ Additional connection parameters
- Tilleggsforbindelsesparametre
+ Tilleggsforbindelsesparametre
+ Database username
- Database brukernavn
+ Database brukernavn
+ Database password
- Database passord
+ Database passord
+ Save the connection username in the registry
- Lagre forbindelsens brukernavn i registeret
+ Lagre forbindelsens brukernavn i registeret
+ Save Username
- Lagre brukernavn
+ Lagre brukernavn
+ &Test Connect
- &Test forbindelse
+ &Test forbindelse
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Lagre forbindelsens passord i registeret (ADVARSEL: IKKE SIKKER)
+ Lagre forbindelsens passord i registeret (ADVARSEL: IKKE SIKKER)
+ Save Password
- Lagre passord
+ Lagre passord
+ Encrypt packets using simple encryption
- Krypter pakker med enkel kryptering
+ Krypter pakker med enkel kryptering
+ Simple Encryption
- Enkel kryptering
+ Enkel kryptering
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Bruk estimater for bestemte lagegenskaper, slik som kardinalitet, omriss,etc. (forbedrer yteevnen)
+ Bruk estimater for bestemte lagegenskaper, slik som kardinalitet, omriss,etc. (forbedrer yteevnen)
+ Estimate table metadata
- Bruk estimerte tabellmetadata
+ Bruk estimerte tabellmetadata
+ Search for geometry columns in tables owned by other users
- Søk etter geometrikolonner i tabeller eid av andre brukere
+ Søk etter geometrikolonner i tabeller eid av andre brukere
+ Search other users' tables
- Søk andre brukeres tabeller
+ Søk andre brukeres tabeller
SaSourceSelect
+ &Add
- &Legg til
+ &Legg til
+ &Set Filter
- &Sett filter
+ &Sett filter
+ Wildcard
- Jokertegn
+ Jokertegn
+ RegExp
- regulæruttrykk
+ regulæruttrykk
+ All
- Alle
+ Alle
+ Schema
- Skjema
+ Skjema
+ Table
- Tabell
+ Tabell
+ Type
- Type
+ Type
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Linjetolkning
+ Linjetolkning
+ Geometry column
- Geometrikolonne
+ Geometrikolonne
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Er du sikker på at du vil fjerne %1 forbindelsen og alle tilknyttede innstillinger?
+ Er du sikker på at du vil fjerne %1 forbindelsen og alle tilknyttede innstillinger?
+ Confirm Delete
- Bekreft slett
+ Bekreft slett
+ Select Table
- Velg tabell
+ Velg tabell
+ You must select a table in order to add a layer.
- Du må velge en tabell for å kunne legge til et lag.
+ Du må velge en tabell for å kunne legge til et lag.
+ Failed to load interface
- Kunne ikke laste grensesnitt
+ Kunne ikke laste grensesnitt
+ Connection failed
- Tilkobling mislyktes
+ Tilkobling mislyktes
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Tilkobling til database %1 mislyktes. Sjekk innstillinger og prøv igjen.
+ Tilkobling til database %1 mislyktes. Sjekk innstillinger og prøv igjen.
SQL-Anywhere feilkode: %2
Beskrivelse: %3
+ No accessible tables found
- Ingen tilgjengelige tabeller funnet
+ Ingen tilgjengelige tabeller funnet
+ Database connection was successful, but no tables containing geometry columns were %1.
- Database-tilkoblingen var vellykket, men ingen tabeller som inneholder geometrikolonner var %1.
+ Database-tilkoblingen var vellykket, men ingen tabeller som inneholder geometrikolonner var %1.
+ found
- funnet
+ funnet
+ found in your schema
- funnet i ditt skjema
+ funnet i ditt skjema
SaSourceSelectBase
+ Add SQL Anywhere layer
- Legg til SQL-Anywherelag
+ Legg til SQL-Anywherelag
+ SQL Anywhere Connections
- SQL-Anywhereforbindelser
+ SQL-Anywhereforbindelser
+ Delete
- Slett
+ Slett
+ Edit
- Rediger
+ Rediger
+ New
- Ny
+ Ny
+ Connect
- Koble til
+ Koble til
+ Search options
- Søkinnstillinger
+ Søkinnstillinger
+ Search
- Søk
+ Søk
+ Search mode
- Søkmodus
+ Søkmodus
+ Search in columns
- Søk i kolonner
+ Søk i kolonner
SaveAsPythonScriptAction
I/O error
- I/O-feil
+ I/O-feil
Unable to save edits. Reason:
%s
- Kunne ikke lagre redigeringer. Grunn:
+ Kunne ikke lagre redigeringer. Grunn:
%s
@@ -54230,20 +53922,24 @@ Beskrivelse: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Legg til SQL-"Anywhere-lag"...
+ Legg til SQL-"Anywhere-lag"...
+ Store vector layers within a SQL Anywhere database
- Lagre vektorlag innenfor en SQL-"Anywhere-database"
+ Lagre vektorlag innenfor en SQL-"Anywhere-database"
+ Invalid Layer
- Ugyldig lag
+ Ugyldig lag
+ %1 is an invalid layer and cannot be loaded.
- %1 er et ugyldig lag og kan ikke lastes.
+ %1 er et ugyldig lag og kan ikke lastes.
@@ -55581,7 +55277,7 @@ Kjør topologi sjekk igjen.
context_help
- <h3>Database connection</h3>
<h3>Databaseforbindelse</h3>
@@ -55738,14 +55434,14 @@ which are described and illustrated on <a href="http://en.wikipedia.org/
<p>Contact the author through aruntheguy at gmail dot com</p>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55755,7 +55451,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55805,7 +55501,7 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
<h3>Brukerdefineret CRS</h3>
Hvis QGIS ikke har det CRS, du skal bruke, kan du definere et brukerdefinert CRS. <p>
@@ -55837,7 +55533,7 @@ NB: Parametre skal starte med en +proj=-blok for å representere det nye CRS-et.
<table>
<tr>
<td>
- <p align='justify'>
+ <p align='justify'>
The QGIS Python Console is an interactive shell for the python command executions.
It also has a python file editor that allows you to edit and save your python scripts.
Both console and editor are based on PyQScintilla2 package.<br>
@@ -55893,7 +55589,7 @@ NB: Parametre skal starte med en +proj=-blok for å representere det nye CRS-et.
</tr>
</table>
<b><i>Toolbar:</i></b>
- <table width="100%" id='toolbarConsole'>
+ <table width="100%" id='toolbarConsole'>
<tr>
<td><img src="qrc:/images/themes/default/console/iconClearConsole.png" /></td>
<td colspan="2">Clear python console</td>
@@ -55988,12 +55684,12 @@ that will be automatically deleted after running.</li>
<br>
<li><label>Using prepared APIs file:</label> If checked the *.pap file will be used for code completion. To generate a prepared APIs file you have to load least an *.api file and then compile it by clicking on <label>Compile Apis...</label> button.</li>
</ul>
-<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
- <b>Note:</b> To save the state of console's widgets you have to close the Python Console
+<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
+ <b>Note:</b> To save the state of console's widgets you have to close the Python Console
from the close button. This allows you to save the geometry to be restored to the next start.
</p>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -58495,7 +58269,7 @@ Programtillegget lukkes.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -58511,1857 +58285,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -60414,10 +60134,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60431,10 +60151,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -60455,10 +60175,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -60471,12 +60191,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -60492,16 +60212,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -60530,15 +60250,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -60555,17 +60275,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -60579,17 +60299,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -60605,16 +60325,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -60628,10 +60348,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -60644,10 +60364,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -60661,12 +60381,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -60680,12 +60400,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -60700,17 +60420,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -60720,10 +60440,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -60738,12 +60458,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -60757,12 +60477,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -60776,10 +60496,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -60796,12 +60516,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -60815,17 +60535,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -60840,10 +60560,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -60854,12 +60574,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -60873,17 +60593,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -60896,12 +60616,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -60918,14 +60638,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -60939,15 +60659,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -60956,15 +60676,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -60995,14 +60715,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -61021,14 +60741,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -61133,12 +60853,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -61152,10 +60872,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -61169,10 +60889,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -61189,10 +60909,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -61208,9 +60928,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -63717,7 +63437,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Median:
-
Observed mean distance:
@@ -63767,4 +63487,4 @@ Returns a string representation of a color based on its hue, saturation, value a
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_nl.ts b/i18n/qgis_nl.ts
index ed2295c6f53..b79ddb39ea3 100644
--- a/i18n/qgis_nl.ts
+++ b/i18n/qgis_nl.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Bibliotheek:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning>de tabel geometry_columns bestaat niet!
Deze tabel is benodigd voor veel GIS software om een tabellijst te tonen.
@@ -417,13 +415,13 @@ Deze tabel is benodigd voor veel GIS software om een tabellijst te tonen.Scripts:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> Versie van geïnstalleerde scripts komen niet overeen met vrijgegeven scripts!
Dit is waarschijnlijk het resultaat van een incorrect uitgevoerde upgrade van PostGIS.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Gebruiker heeft geen rechten om de inhoud van de tabel 'geometry_columns' te lezen
Deze tabel is essentieel voor veel GIS applicaties voor de enumeratie van tabellen.
@@ -2098,7 +2096,7 @@ Dit een onverwacht resultaat opleveren.
Veld voor lengte
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Verwijderen van bestaande shape-bestand niet mogelijk
%s
@@ -2408,47 +2406,24 @@ Weet u zeker dat u door wilt?
verwijderen uit bestaande selectie
- Select by location
Selecteren op plaats
- Select features in:
Selecteer objecten in:
- that intersect features in:
die objecten doorsnijden in:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Bestaande selectie bewerken door:
+ Bestaande selectie bewerken door:
Use selected features only
- Alleen geselecteerde objecten gebruiken
+ Alleen geselecteerde objecten gebruiken
Please specify select layer
@@ -3409,7 +3384,7 @@ De plugin wordt niet geactiveerd.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4728,7 +4703,7 @@ wanneer de knop Help in het dialoog scherm wordt ingedrukt.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Exposeren van een dataset met 1 band met een kleurentabel als een dataset met 3 (RGB) of 4 (RGBA) banden.
Nuttig voor de output drivers zoals JPEG, JPEG2000, MrSID, ECW die geen kleur-geïndexeerde datasets ondersteunen.
@@ -5531,7 +5506,7 @@ GEOS fout: een of meer invoerobjecten hebben een ongeldige geometrie.
MainWindow
- &Edit
&Bewerken
@@ -5551,157 +5526,157 @@ GEOS fout: een of meer invoerobjecten hebben een ongeldige geometrie.Selecteren
- Measure
Opmeten
- &Decorations
&Decoraties
- &Layer
&Kaartlagen
- New
Nieuw
- &Plugins
&Plugins
- &Help
&Help
- &Settings
E&xtra
- &Raster
&Raster
- Vect&or
Vect&or
- &OpenStreetMap
&OpenStreetMap
- File
Bestand
- Manage Layers
Kaartlagen bewerken
- Digitizing
Digitaliseren
- Advanced Digitizing
Geavanceerd Digitaliseren
- Map Navigation
Kaart Navigatie
- Attributes
Attributen
- Plugins
Plugins
- Help
Help
- Raster
Raster
- Label
Label
- Vector
Vector
- Database
Database
- Web
Web
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Opslaan als afbeelding...
- &New Print Composer
&Nieuwe Printvormgeving
- Ctrl+P
Ctrl+P
- Composer Manager...
Printvormgeving-manager...
@@ -5721,947 +5696,939 @@ GEOS fout: een of meer invoerobjecten hebben een ongeldige geometrie.Nieuw van Template
- Preview Mode
Modus Voorvertoning
- Paste Features as
Objecten plakken als
- &New
&Nieuw
- &Open...
&Open...
- &Save
Op&slaan
- Save &As...
Opslaan &Als...
- Exit QGIS
QGIS afsluiten
- Ctrl+Q
Ctrl+Q
- &Undo
&Ongedaan maken
- Ctrl+Z
Ctrl+Z
- &Redo
&Opnieuw
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Kaartobjecten Knippen
- Ctrl+X
Ctrl+X
- Copy Features
Kaartobjecten Kopiëren
- Ctrl+C
Ctrl+C
- Paste Features
Kaartobjecten Plakken
- Ctrl+V
Ctrl+V
- Add Feature
Object toevoegen
- Ctrl+.
Ctrl+.
- Move Feature(s)
Object(en) verplaatsen
- Reshape Features
Objecten vervormen
- Split Features
Kaartobjecten splitsen
- Split Parts
Delen Splitsen
- Delete Selected
Geselecteerd Object(en) Verwijderen
- Add Ring
Ring toevoegen
- Add Part
Onderdeel toevoegen
- Simplify Feature
Versimpel Object
- Delete Ring
Verwijder Ring
- Delete Part
Verwijder Onderdeel
- Merge Selected Features
Geselecteerde objecten samenvoegen
- Merge Attributes of Selected Features
Attributen van geselecteerde opjecten samenvoegen
- Node Tool
Knooppunt-gereedschap
- Rotate Point Symbols
Puntsymbolen Roteren
- Snapping Options...
'Snapping'-opties...
- Pan Map
Kaart verschuiven
- Zoom In
Inzoomen
- Ctrl++
Ctrl++
- Zoom Out
Uitzoomen
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Eén object selecteren
+ Eén object selecteren
+ Select Features by Rectangle
- Objecten met een rechthoek selecteren
+ Objecten met een rechthoek selecteren
- Select Features by Polygon
Objecten met een polygoon selecteren
- Select Features by Freehand
Objecten selecteren door er overheen te tekenen
- Select Features by Radius
Objecten met een cirkel selecteren
- Deselect Features from All Layers
Objecten uit alle layers deselecteren
- Identify Features
Objecten Identificeren
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Lijn Meten
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Vlak Opmeten
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Hoek Opmeten
- Zoom Full
Volledig Uitzoomen
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Op Kaartlaag Inzoomen
- Zoom to Selection
Inzoomen Op Selectie
- Ctrl+J
Ctrl+J
- Zoom Last
Vorig beeld
- Zoom Next
Volgend beeld
- Zoom Actual Size
Zoom naar Ware Grootte
- Zoom to Native Pixel Resolution
Inzoomen naar 'native' pixelresolutie
- Map Tips
Kaart Tips
- Show information about a feature when the mouse is hovered over it
Toon informatie over een kaartobject als u de muis eroverheen beweegt
- New Bookmark...
Nieuwe Favoriete Plaats...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Toon Favoriete Plaatsen
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Bijwerken
- Text Annotation
Tekst Annotatie
- Form Annotation
Formulier Annotatie
- Move Annotation
Verplaats Annotatie
- Labeling
Labels
- Layer Labeling Options
Laag-label opties
- New Shapefile Layer...
Nieuw Shape Laag...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Nieuwe SpatialLite-laag ...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Rasterberekeningen ...
- Add Vector Layer...
Vectorlaag toevoegen...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Rasterlaag toevoegen...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
PostGIS-laag toevoegen...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
SpatialLite-laag toevoegen...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
MSSQL Spatial-laag toevoegen...
- Add Oracle Spatial Layer...
Oracle-Spatial-laag toevoegen...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
WMS/WMTS-laag toevoegen...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Open attributentabel
- Toggle Editing
Bewerken aan/uitzetten
- Toggles the editing state of the current layer
Zet de modus van de objectinvoer om
- Save for Selected Layer(s)
Opslaan voor Geselecteerde Laag/lagen
- Save edits to current layer, but continue editing
Huidige aanpassingen opslaan, maar doorgaan met aanpassen
- Save As...
Opslaan als...
- Add from Layer Definition File...
Toevoegen van Laag Definitie Bestand...
- Save As Layer Definition File...
Opslaan Als Laag Definitie Bestand...
- Normal
Normaal
- Normal preview mode
Modus normale voorvertoning
- Simulate Photocopy (Grayscale)
Simuleer Fotokopie (Grijsschalen)
- Simulate photocopy (grayscale)
Simuleer fotokopie (grijsschalen)
- Simulate Fax (Mono)
Simuleer Fax (Zwart wit)
- Simulate fax (mono)
Simuleer fax (zwart wit)
- Simulate Color Blindness (Protanope)
Simuleer Kleurenblind (Protanope)
- Simulate color blindness (protanope)
Simuleer kleurenblind (protanope)
- Simulate Color Blindness (Deuteranope)
Simuleer Kleurenblind (Deuteranope)
- Simulate color blindness (deuteranope)
Simuleer kleurenblind (deuteranope)
- Set Scale Visibility of Layer(s)
Zichtbaarheidsschaal instellen...
- Remove Layer(s)
Laag/lagen verwijderen
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Instellen laag-CRS
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Project CRS van kaartlaag overnemen
- Properties...
Eigenschappen...
- Query...
Query...
- Add to Overview
Toevoegen aan overzichtskaart
- Add All to Overview
Alles aan overzichtskaart toevoegen
- Remove All from Overview
Verwijder alles van Overzichtskaart
- Show All Layers
Toon Alle Lagen
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Verberg Alle Lagen
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Beheer en Installeer Plugins...
- Open Field Calculator
Open veldberekening
- Add Delimited Text Layer...
Tekstgescheiden kaartlaag toevoegen...
- Add Delimited Text Layer
Tekstgescheiden kaartlaag toevoegen
- New Vector Layer
Nieuwe Vectorlaag
- Paste features in clipboard into a new OGR vector layer.
Objecten in klembord plakken in nieuwe OGR vectorlaag.
- New Memory Vector Layer
Nieuwe Memory Vectorlaag
- Paste features in clipboard into a new memory vector layer.
Objecten in klembord plakken in een nieuwe memory vectorlaag.
- Toggle Full Screen Mode
Volledig scherm aan/uit
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Projectinstellingen...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Opties...
- Custom CRS...
Aangepaste CRS...
- Configure shortcuts...
Snelkoppelingen bewerken...
- Local Histogram Stretch
Lokaal Histogram 'Strech'
- Stretch histogram of active raster to view extents
Verleng het histogram van actieve raster to aan de extent van het kaartbeeld
- Help Contents
Inhoudsopgave
- F1
F1
- API documentation
API documentatie
- QGIS Home Page
QGIS Start Pagina
- Ctrl+H
Ctrl+H
- Check QGIS Version
QGIS op updates controleren
- Check if your QGIS version is up to date (requires internet access)
Controleer of er een nieuwere QGIS versie beschikbaar is (vereist internet toegang)
- About
Info
- QGIS Sponsors
QGIS Sponsors
- Move Label
Label Verplaatsen
- Rotate Label
Labels roteren
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Roteer label Ctl (Cmd) verhoogt met 15 graden.
- Change Label
Label Wijzigen
- Style Manager...
Stijl-manager...
- Python Console
Python Console
- Full histogram stretch
Volledige histogram
- Stretch Histogram to Full Dataset
Histogram uitbreiden op basis van gehele dataset
- Customization...
Aanpassingen...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Dit is hier alleen maar om conflicten met snelkoppelingen op te vangen, de snelkoppeling wordt opgevangen door QgsCustomization
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Kaartlagen en groepen inbedden...
- Embed layers and groups from other project files
Gebruik lagen en groepen uit andere projectbestanden
- &Copyright Label
&Copyrightlabel
- Creates a copyright label that is displayed on the map canvas.
Creëert een copyrightlabel welk wordt getoond op het de kaart.
- &North Arrow
&Noordpijl
- "Creates a north arrow that is displayed on the map canvas"
"Aanmaken van een Noordpijl om op de kaart te tonen"
- &Scale Bar
&Schaalbalk
- Creates a scale bar that is displayed on the map canvas
Maakt een schaalbalk aan om op de kaart te tonen
- Add WFS Layer...
WFS-laag toevoegen...
- Add WFS Layer
WFS-laag toevoegen
- Feature Action
Object-actie
- Run Feature Action
Object-actie uitvoeren
- Pan Map to Selection
Kaart verschuiven naar selectie
- Touch zoom and pan
Zoom en pan voor aanraakschermen
- Offset Curve
Verspring Curve
- Copy style
Kopiëer stijl
- Paste style
Plak stijl
- Add WCS Layer...
WCS-laag toevoegen...
- &Grid
&Grid
- Grid
Grid
- Pin/Unpin Labels
Prik/Onprik labels
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6672,44 +6639,44 @@ Shift unpins, Ctl (Cmd) toggles state
Actief op all aan te passen layers
- Highlight Pinned Labels
Geprikte Labels Accentueren
- New Blank Project
Nieuw leeg project
- Local Cumulative Cut Stretch
Lokale Cumulatieve Strekking
- Local cumulative cut stretch using current extent, default limits and estimated values.
Lokale Cumulatieve Strekking waarbij volledige grootte, standaard limieten en geschatte waarden wordt gebruikt.
- Full Dataset Cumulative Cut Stretch
Volledige Cumulatieve Strekking
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Cumulatieve Strekking waarbij volledige grootte van de dataset, standaard limieten en geschatte waarden wordt gebruikt.
- Show/Hide Labels
Toon/Verberg Labels
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6720,128 +6687,128 @@ Shift+klik op label om deze te verbergen
Werkt voor huidige actieve bewerkbare laag
- Html Annotation
Html-notatie
- Duplicate Layer(s)
Dupliceer Laag/lagen
- SVG annotation
SVG annotatie
- Save for All Layers
Opslaan voor Alle Lagen
- Rollback for All Layers
Terugdraaien voor Alle Lagen
- Cancel for All Layers
Afbreken voor Alle Lagen
- Rollback for Selected Layer(s)
Terugdraaien voor Geselecteerde Laag/lagen
- Current Edits
Huidige Wijzigingen
- Cancel for Selected Layer(s)
Afbreken voor Huidige Laag/lagen
- Save Layer Edits
Opslaan Wijzigingen Laag
- Rotate Feature(s)
Draai Object(en)
- &Download data
&Download data
- &Import topology from XML
&Importeer topologie van XML
- &Export topology to SpatiaLite
&Exporteer topologie naar Spatialite
- Increase brightness
Lichtsterkte verhogen
- Decrease brightness
Lichtsterkte verlagen
- Increase contrast
Contrast verhogen
- Decrease contrast
Contrast verlagen
- Select By Expression
Selecteren met Expressie
- Select features using an expression
Selecteren van objecten gebruik makend van een reguliere expressie
- Need commercial support?
Commerciële ondersteuning nodig?
- DXF Export...
DXF Export...
- Fill Ring
Ring Vullen
@@ -7287,11 +7254,6 @@ Werkt voor huidige actieve bewerkbare laag
Can't save model
Het model kan niet worden opgeslagen
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
Model bevat geen algoritmes en/of parameters en kan niet worden uitgevoerd
@@ -7319,7 +7281,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- Het geselecteerde model kon niet worden geladen.
+ Het geselecteerde model kon niet worden geladen.
Foutregel: %s
@@ -8170,22 +8132,22 @@ Foutregel: %s
Schatten normaal afgeleiden...
- minidump written to %1
minidump geschreven naar %1
- writing of minidump to %1 failed (%2)
schrijven van minidump van %1 mislukt (%2)
- creation of minidump to %1 failed (%2)
aanmaken van minidump naar %1 mislukt(%2)
- Crash dumped
Vastloper opgeslagen in logbestand
@@ -8339,6 +8301,7 @@ Fout(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
Automatisch aangemaakte CRS
@@ -8503,85 +8466,85 @@ Fout(%2): %3
Kan '%1' niet converteren naar type Interval
- Cannot convert '%1' to boolean
Kan '%1' niet converteren naar boolean
- Domain max must be greater than domain min
Domain max moet groter zijn dan domein min
- Exponent must be greater than 0
Exponent moet groter zijn dan 0
- Invalid regular expression '%1': %2
Ongeldige formule '%1': %2
- Index is out of range
Index valt buiten domein
- Cannot convert '%1:%2:%3' to color
Kan '%1:%2:%3' niet omzetten naar kleur
- Cannot convert '%1:%2:%3:%4' to color
Kan '%1:%2:%3:%4' niet omzetten naar kleur
- "%1" is not a valid color ramp
"%1" is niet een valide kleurverloop
- Cannot convert '%1:%2:%3:%4:%5' to color
Kan '%1:%2:%3:%4:%5' niet omzetten naar kleur
- function help for %1 missing
functie help voor %1 niet aanwezig
- Operators
Operatoren
- Fields and Values
Velden en Waarden
- Math
Berekening
- Conversions
Conversies
- Conditionals
Voorwaarden
@@ -8628,58 +8591,58 @@ Fout(%2): %3
jaar|jaren
- Date and Time
Datum en Tijd
- String
String
- Color
Kleur
- Geometry
Geometrie
- Record
Record
- No root node! Parsing failed?
Geen root node! Parseren mislukt?
- (no root)
(geen root)
- Unary minus only for numeric values.
Min-teken alleen toegestaan voor numerieke waarden.
- Can't preform /, *, or % on DateTime and Interval
Kan /, *, or % niet uitvoeren op type DateTime en Interval
- [unsupported type;%1; value:%2]
[niet ondersteund type;%1; waarde:%2]
- Column '%1' not found
Kolom '%1' niet gevonden
@@ -8767,10 +8730,7 @@ Fout(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- lijn %1 bevat %n dubbele hoekpunt bij %2
- lijn %1 bevat %n dubbele hoekpunten bij %2
-
+ lijn %1 bevat %n dubbele hoekpunt bij %2 lijn %1 bevat %n dubbele hoekpunten bij %2
Version 0.1
@@ -9892,6 +9853,7 @@ Only %1 of %2 features written.
Layers
Lagen
@@ -10469,12 +10431,14 @@ Only %1 of %2 features written.
Shape-bestand naar PostgreSQL/PostGIS omzetgereedschap
+ SQL Anywhere plugin
- SQL Anywhere plugin
+ SQL Anywhere plugin
+ Store vector layers within a SQL Anywhere database
- Vectorlagen opslaan in een SQL Anywhere database
+ Vectorlagen opslaan in een SQL Anywhere database
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS kan uw GRASS installatie niet vinden.
Wilt u het pad (GISBASE) naar uw GRASS installatie wijzen?
@@ -10915,7 +10879,7 @@ Wilt u het pad (GISBASE) naar uw GRASS installatie wijzen?
Aanmaken van bestand %1.qpj mislukt
- Fetching features failed.
SQL:%1
Error: %2
@@ -10924,7 +10888,7 @@ SQL:%1
Fout: %2
- Oracle
Oracle
@@ -11388,12 +11352,14 @@ SQL: %1
object bestaat uit meerdere delen
+ Error describing bind parameters
- Fout definitie van verbindingsparameters
+ Fout definitie van verbindingsparameters
+ Error binding parameters
- Fout in de verbindingparameters
+ Fout in de verbindingparameters
Read-only field that generates a UUID if empty.
Alleen-lezen-veld dat UUID genereert indien het leeg is.
-
- Legend
- Legenda
-
QSpatiaLiteDriver
- Error opening database
Fout tijdens openen database
- Error closing database
Fout tijdens sluiten database
- Unable to begin transaction
De transactie opzetten mislukt
- Unable to commit transaction
De transactie afronden mislukt
- Unable to rollback transaction
De transactie terugdraaien mislukt
@@ -11598,27 +11559,27 @@ Antwoord was:
Geen query
- Unable to execute statement
Opdracht kon niet worden uitgevoerd
- Unable to execute multiple statements at a time
Het tegelijkertijd uitvoeren van meerdere opdrachten is mislukt
- Unable to reset statement
Niet mogelijk om opdracht te resetten
- Unable to bind parameters
Het binden van parameters is mislukt
- Parameter count mismatch
Het aantal gegeven parameters komt niet overeen met verwachte aantal
@@ -11795,61 +11756,61 @@ Antwoord was:
QGIS Gereed!
- Minimize
Minimaliseren
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Minimaliseert het actieve scherm naar de 'dock'
- Zoom
Zoom
- Toggles between a predefined size and the window size set by the user
Wisselt tussen een voorgedefineerde venstergrootte en een door de gebruiker ingestelde grootte
- Bring All to Front
Alle Naar de Voorgrond
- Bring forward all open windows
Alle geopende vensters naar de voorgrond
- Current Edits
Huidige Wijzigingen
- Error
Fout
- Failed to open Python console:
Fout bij het openen van de Python-console:
@@ -11873,139 +11834,139 @@ Neem alstublieft contact op met de ontwikkelaars.
QGIS - %1 ('%2')
- Panels
Panelen
- Toolbars
Werkbalken
- Window
Venster
- &Database
&Database
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
De voortgangsindicator toont de status van het (her)tekenen van kaartlagen en andere tijdsintensieve operaties
- Toggle extents and mouse position display
Wissel tussen vertoning muispositie of extent
- Coordinate:
Coördinaat:
- Current map coordinate
Huidige kaartcoördinaten
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Toont de kaartcoördinaten op de plek van de cursor. De coördinaten wordt constant ververst wanneer de muis wordt bewogen. De coördinaten kunnen worden aangepast om het kaartbeeld te centreren naar gegeven positie. Het formaat is latitute,longitude of oost,noord
- Current map coordinate (lat,lon or east,north)
Huidige kaart coördinaat (latitude,longitude of oost,noord)
- Scale
Schaal
- Current map scale
Huidige kaartschaal
- Displays the current map scale
Toon de huidige kaartschaal
- Current map scale (formatted as x:y)
Huidige kaartschaal (getoond als x:y)
- Render
(Her)teken
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Indien aangevinkt worden de kaartlagen (her)tekend bij elke kaart-zoom of -verschuiving en andere acties. Indien niet aangevinkt wordt niet direkt hertekend. Dit maakt het mogelijk om een groot aantal kaartlagen toe te voegen en de symboliek in te stellen voordat de kaart wordt hertekend.
- Toggle map rendering
Kaart (her)tekenen omzetten
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Dit icoon toont of de gelijktijdige CRS-transformatie is aangezet of niet. Klik op het icoon om de dialoog projecteigenschappen te laten verschijnen en dit aan te passen.
- CRS status - Click to open coordinate reference system dialog
CRS status - Klik om de dialoog 'Ruimtelijk Referentie Systeem' te tonen
- Ready
Gereed
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Kaartoverzicht. Dit vlak kan worden gebruikt om een referentiekaart met de huidige extent van de kaart af te beelden. De huidige exent wordt getoond als een rode rechthoek. Elke kaartlaag in de kaart kan aan het kaartoverzicht worden toegevoegd.
- Overview
Kaartoverzicht
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Legenda welke alle lagen in de huidige kaart toont. Klik op het selectievakje om een laag zichtbaar te maken, of te verbergen.
Dubbelklik op een laag in de legenda om de verschijning of andere eigenschappen aan te passen .
- Layers
Lagen
- Map layer list that displays all layers in drawing order.
Kaartlagen weergeven zodat ze tonen in de volgorde van tekenen.
- Layer order
Laag Volgorde
@@ -12015,394 +11976,388 @@ Dubbelklik op een laag in de legenda om de verschijning of andere eigenschappen
Niet openbare qgis.db
- < Blank >
< Leeg >
- QGIS version
QGIS-versie
- QGIS code revision
QFIS code revisie
- Compiled against Qt
Gecompileerd tegen Qt
- Running against Qt
Gebruikt nu Qt
- Compiled against GDAL/OGR
Gecompileerd tegen GDAL/OGR
- Running against GDAL/OGR
Gebruikt nu GDAL/OGR
- PostgreSQL Client Version
PostgreSQL Client Versie
- No support.
Geen ondersteuning.
- SpatiaLite Version
SpatiaLite-versie
- QWT Version
QWT versie
- PROJ.4 Version
PROJ.4 Versie
- QScintilla2 Version
QScintilla2 Versie
- This copy of QGIS writes debugging output.
Deze versie van QGIS schrijft debug-informatie.
- %1 doesn't have any layers
%1 bevat geen lagen
- Invalid Data Source
Ongeldige Data
- %1 is not a valid or recognized data source
%1 wordt niet als geldige bronbestand beschouwd
- Vector
Vector
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Probleem bij het maken van een PostgreSQL-selecteerdialoog voor provider.
- %1 is an invalid layer - not loaded
%1 is een ongeldige laag en is niet geladen
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 is een ongeldige laag en kan niet worden geladen. Check alstublief de <a href="#messageLog">message log</a> voor verder informatie.
- QGIS files
QGIS bestanden
- No legend entries selected
Geen legenda items geselecteerd
- Select the layers and groups you want to remove in the legend.
Selecteer de lagen en groepen die je wilt verplaatsen naar de legenda.
- Remove layers and groups
Verwijder lagen en groepen
- Remove %n legend entries?
number of legend items to remove
-
- %n legenda-item verwijderen?
- %n legenda-items verwijderen?
-
+ %n legenda-item verwijderen? %n legenda-items verwijderen?
- %n legend entries removed.
number of removed legend entries
-
- %n legenda-item verwijderd.
- %n legenda-items verwijderd.
-
+ %n legenda-item verwijderd. %n legenda-items verwijderd.
- %1 (%2 type unsupported)
%1 (%2 type niet ondersteund)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/nl/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Wilt u het huidige project opslaan? %1
- Invalid Layer
Ongeldige Laag
- SpatiaLite
SpatialLite
- Cannot get SpatiaLite select dialog from provider.
Probleem bij het maken van een SpatiaLite-selecteerdialoog voor provider.
- Delimited Text
Tekengescheiden tekst
- Cannot get Delimited Text select dialog from provider.
Probleem bij het maken van een Tekengescheiden tekst-selecteerdialoog voor provider.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Probleem bij het maken van een MSSQL-selecteerdialoog voor provider.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Probleem bij het maken van een Oracle-selecteerdialoog voor provider.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Probleem bij het maken van een WMS-selecteerdialoog voor provider.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Probleem bij het maken van een WCS-selecteerdialoog voor provider.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Probleem bij het maken van een WFS-selecteerdialoog voor provider.
- Default failed to open: %1
Default openen mislukt: %1
- Default not found: %1
Default niet gevonden: %1
- Open Template Project
Open Template Project
- Auto-open Project
Auto-open Project
- Failed to open: %1
Openen van: %1 mislukt
- Not valid project file: %1
Project bestand: %1 is niet valide
- Project failed to open: %1
Openen van project: %1 mislukt
- Default template has been reopened: %1
Default template is opnieuw geopend: %1
- File not found: %1
Bestand niet gevonden: %1
- Calculating...
Berekenen...
- Abort...
Afbreken...
- Choose a QGIS project file to open
Kies een QGIS-project om te openen
- Loading project: %1
Bezig met laden project: %1
- Unable to open project
Project openen mislukt
- Security warning
Beveiligingswaarschuwing
- project macros have been disabled.
project macro's zijn uitgeschakeld.
- Enable macros
Macro's activeren voor gebruik
- Project loaded
Project geladen
- Choose a QGIS project file
Kies een QGIS-projectbestand
- Saved project to: %1
Sla project op naar: %1
- Unable to save project %1
Fout bij het opslaan van project naar %1
- Choose a file name to save the QGIS project file as
Kies een bestandsnaam om het QGIS-project op te slaan als
- Unable to load %1
Laden mislukt van %1
- Choose a file name to save the map image as
Kies een bestandsnaam voor het opslaan van de kaart als
- Saved map image to %1
Kaartafbeelding opgeslagen als %1
- Default system font substituted.
Standaard systeem font aangepast.
- Labeling
Labels
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
Font voor laag <b><u>%1</u></b> is niet gevonden (<i>%2</i>). %3
- Open labeling dialog
Open de labeling dialoog
@@ -12503,452 +12458,446 @@ Dubbelklik op een laag in de legenda om de verschijning of andere eigenschappen
Datum/Tijd
- Compiled against GEOS
Gecompileerd tegen GEOS
- Running against GEOS
Gebruikt nu GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
Aanmaken van laag mislukt. Controleer <a href="#messageLog">message log</a> voor meer informatie.
- Insufficient permissions
Onvoldoende rechten
- The project file is not writable.
Het projectbestand is niet schrijfbaar.
- DXF export completed
DXF export voltooid
- DXF export failed
DXF export niet gelukt
- Commit errors
Commit fouten
- Could not commit changes to layer %1
Commiten van de aanpassingen zijn mislukt voor laag %1
- Errors: %1
Fouten: %1
- Show more
Meer tonen
- Labeling Options
Labelopties
- Please select a vector layer first
Selecteer eerst een vectorlaag
- Layer labeling settings
Instellingen voor het labelen van Laag
- Reading raster
Raster inlezen
- Cannot write raster error code: %1
Kan niet schrijven naar raster fout code: %1
- Saving done
Opslaan voltooid
- Export to vector file has been completed
Export naar vectorbestand is voltooid
- Save error
Fout bij opslaan
- Export to vector file failed.
Error: %1
Export naar vectorbestand mislukt.
Fout: %1
- No Layer Selected
Geen Kaartlaag Geselecteerd
- To delete features, you must select a vector layer in the legend
Om kaartobjecten te verwijderen, selecter eerst een vectorlaag in de legenda
- No Vector Layer Selected
Geen Vectorlaag Geselecteerd
- Deleting features only works on vector layers
Verwijderen van kaartobjecten werkt alleen met vectorlagen
- Provider does not support deletion
Dataprovider heeft geen mogelijkheid tot verwijderen
- Data provider does not support deleting features
Dataprovider heeft geen mogelijkheid om kaartobjecten te verwijderen
- Layer not editable
Laag is niet bewerkbaar
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
De huidige kaartlaag is niet bewerkbaar. Kies 'Start bewerken' in de digitaliseerwerkbalk.
- No Features Selected
Geen Objecten Geselecteerd
- The current layer has not selected features
De huidige laag bevat geen geselecteerde objecten
- Delete features
Kaartobjecten verwijderen
- Delete %n feature(s)?
number of features to delete
-
- %n kaartobject verwijderen?
- %n kaartobjecten verwijderen?
-
+ %n kaartobject verwijderen? %n kaartobjecten verwijderen?
- Features deleted
Kaartobjecten verwijderd
- Problem deleting features
Fout bij het verwijderen van kaartobjecten
- A problem occured during deletion of features
Er is een fout opgetreden tijdens het verwijderen van objecten
- %n feature(s) deleted.
number of features deleted
-
- %n object(en) verwijderd.
- %n object(en) verwijderd.
-
+ %n object(en) verwijderd. %n object(en) verwijderd.
- Merging features...
Kaartobjecten samenvoegen...
- Abort
Afbreken
- Create unique print composer title
Aanmaken unieke titel printvormgeving
- (title generated if left empty)
(indien leeg wordt een titel gegenereerd)
- Composer title
Titel printvormgeving
- Title can not be empty!
Titel moet gegeven zijn!
- Title already exists!
Titel bestaat al!
- Composer %1
Printvormgeving %1
- copy
Kopiëren
- No active layer
Geen actieve laag
- No active layer found. Please select a layer in the layer list
Geen actieve laag gevonden. Selecteer een laag uit de lagenlijst
- Active layer is not vector
Actieve laag is geen vectorlaag
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
Het samenvoegen van objecten werkt alleen op vectorlagen. Selecteer een vectorlaag uit de lagenlijst
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Samenvoegen van objecten kan alleen in de modus 'bewerken'. Om dit gereedschap te gebruiken, ga naar Kaartlagen->Bewerken aan/uitzetten
- Not enough features selected
Niet genoeg objecten geselecteerd
- The merge tool requires at least two selected features
Het samenvoeggereedschap heeft minstens twee geselecteerde objecten nodig
- Merged feature attributes
Object-attributen samenvoegen
- Merge failed
Samenvoegen mislukt
- An error occured during the merge operation
Er is een fout opgetreden bij het samenvoegen
- Union operation canceled
Operatie 'union' afgebroken
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
De 'union'-operatie zou resulteren in een geometrie van een type dat niet in de huidige laag past. Bewerking afgebroken
- Merged features
Samengevoegde objecten
- No active vector layer
Geen actieve vectorlaag
- To select features, choose a vector layer in the legend
Om objecten te selecteren, kies een vectorlaag in de legenda
- Features cut
Objecten doorgesneden
- Features pasted
Objecten geplakt
- Paste features
Objecten plakken
- no features could be successfully pasted.
er konden geen objecten worden geplakt.
- %1 features were successfully pasted.
%1 objecten konden worden geplakt.
- %1 of %2 features could be successfully pasted.
%1 van de %2 konden worden geplakt.
- Pasted
Geplakt
- New memory layer name
Nieuwe memory laagnaam
- Layer name
Laagnaam
- No features in clipboard.
Geen objecten in klembord.
- No features with geometry found, point type layer will be created.
Geen objecten binnen geometrie gevonden, vectorlaag voor punten wordt aangemaakt.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Meerdere geometrie typen gevonden, objecten met een geometry type anders dan %1 zullen worden aangemaakt zonder geometrie.
- Cannot create new layer
Kan de nieuwe laag niet aanmaken
- Cannot create field %1 (%2,%3)
Kan velden %1 (%2,%3) niet aanmaken
- Cannot copy style: %1
Kan stijl niet kopiëren %1
- Cannot parse style: %1:%2:%3
Kan stijl niet parseren: %1:%2:%3
- Cannot read style: %1
Kan stijl niet inlezen: %1
- Start editing failed
Bewerken starten mislukt
- Provider cannot be opened for editing
Bewerken starten voor deze (Data)provider mislukt
- Stop editing
Bewerken stoppen
- Do you want to save the changes to layer %1?
Wilt u de huidige aanpassingen in laag %1 opslaan?
- Problems during roll back
Problemen bij de 'roll-back'
- Could not %1 changes to layer %2
Errors: %3
@@ -12959,356 +12908,350 @@ Fouten: %3
- rollback
terugdraaien
- cancel
annuleren
- Save
Opslaan
- all
alles
- Rollback
Terugdraaien
- Cancel
Annuleren
- Current edits
Huidige wijzigingen
- %1 current changes for %2 layer(s)?
%1 huidige wijzigingen voor %2 laag/lagen?
- copy
kopiëren
- Plugin layer
Plugin laag
- Memory layer
Memory laag
- Duplicate layer:
Duplicaat laag:
- %1 (duplication resulted in invalid layer)
%1 (duplicaat resulteert in invalide laag)
- Set scale visibility for selected layers
Zichtbaarheidsschaal instellen voor geselecteerde lagen
- Couldn't load Python support library: %1
Kan benodigde Python module niet laden: %1
- Couldn't resolve python support library's instance() symbol.
Probleem bij het instance()-symbol niet vinden in de python module.
- Python support ENABLED :-)
Python ondersteuning AAN :-)(sp)
- There is a new version of QGIS available
Er is een recentere versie van QGIS beschikbaar
- You are running a development version of QGIS
U gebruikt een ontwikkel-versie van QGIS
- You are running the current version of QGIS
U gebruikt de laatste versie van QGIS
- Would you like more information?
Wilt u meer informatie?
- QGIS Version Information
QGIS Versie Informatie
- QGIS - Changes since last release
QGIS.-.Aanpassingen sinds laatste release
- Unable to get current version information from server
Ophalen van versieinformatie op dit moment niet mogelijk
- Connection refused - server may be down
Verbinding maken mislukt - server kan uit staan
- QGIS server was not found
QGIS server is niet gevonden
- Unknown network socket error: %1
Onbekende netwerk (socket) fout: %1
- Unable to communicate with QGIS Version server
%1
Problemen met de communicatie met de QGIS Versie-server
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
Voor een 'full histogram stretch' moet een rasterlaag geselecteerd zijn.
- To change brightness or contrast, you need to have a raster layer selected.
Om de lichtsterkte of contrast te wijzigen, moet een rasterlaag geselecteerd zijn.
- en
documentation language
en
- Layer is not valid
Ongeldige kaartlaag
- The layer %1 is not a valid layer and can not be added to the map
Laag %1 is geen geldige laag en kan niet worden toegevoegd
- The layer is not a valid layer and can not be added to the map
De kaartlaag is ongeldig en kan niet worden toegevoegd aan de kaart
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Het project heeft laag/lagen in modus bewerken met nog niet opgeslagen wijzigingen die NIET zullen worden opgeslagen!
- Save?
Opslaan?
- Current CRS: %1 (OTFR enabled)
Huidig CRS: %1 (OTFR aan)
- Current CRS: %1 (OTFR disabled)
Huidig CRS: %1 (OTFR uit)
- Map coordinates for the current view extents
Kaartcoördinaten van de extent van het huidige kaartbeeld
- Map coordinates at mouse cursor position
Kaartcoördinaten onder muisaanwijzer
- Extents:
Extents:
- Maptips require an active layer
Maptips werken alleen met een actieve laag
- %n feature(s) selected on layer %1.
number of selected features
-
- %n feature geselecteerd in laag %1.
- %n features geselecteerd in laag %1.
-
+ %n feature geselecteerd in laag %1. %n features geselecteerd in laag %1.
- Open a GDAL Supported Raster Data Source
Open een GDAL Ondersteunde Raster Databron
- Error adding valid layer to map canvas
Fout toevoegen valide laag aan de kaart
- Raster layer
Rasterlaag
- %1 is not a supported raster data source
%1 is een ongeldige raster databron
- Unsupported Data Source
Niet ondersteund Dataformaat
- Exit QGIS
QGIS afsluiten
- Do you really want to quit QGIS?
Weet u zeker dat u QGIS wilt afsluiten?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Dit project is opgeslagen met een oudere versie van QGIS. Wanneer dit project wordt opgeslagen zal QGIS het updaten naar de huidige versie waardoor het mogelijk niet meer geopend kan worden in oudere versies van QGIS.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p>Dit projectbestand (.qgs) is opgeslagen door een ouder versie van QGiS dan de nu gebruikte. Bij het opnieuw opslaan zal het opgeslagen worden in de nieuwste versie, daarbij kunnen problemen ontstaan wanneer u dit projectbestand alsnog gaat openen in oudere versie van QGIS<p>Hoewel de QGIS ontwikkelaars proberen 'backwards compatible' te blijven, kan er informatie uit het oude projectbestand verlorgen gaan. Om de kwaliteit van QGIS hoog te houden, zouden we het fijn vindne als u een foutrapportage zou doorgeven naar: %3. Vermeld vooral de beide versies van QGIS en stuur het oude .qgs bestand mee.<p>Om deze waarschuwing in de toekomst niet meer te zien, kunt u het vakje '%5' aanvinken in het %4 menu.<p>De versie van het projectbestand is: %1<br>Huidige versie van QGIS: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Extra:Opties:Algemeen</tt>
- Warn me when opening a project file saved with an older version of QGIS
Geef een waarschuwing bij het openen van een projectfile uit een oudere versie van QGIS
- Project file is older
Projectbestand is ouder
- This project file was saved by an older version of QGIS
Dit project is opgeslagen in een oudere versie van QGIS
- Please check the <a href="#messageLog">message log</a> for further info.
Controleer <a href="#messageLog">message log</a> voor meer informatie.
- A network request timed out, any data received is likely incomplete.
Timeout netwerk request, waarschijnlijk is niet alle data ontvangen.
- Warning
Waarschuwing
- This layer doesn't have a properties dialog.
Deze laag heeft een eigenschappen-dialoog.
- Authentication required
Authenticatie vereist
- Proxy authentication required
Proxy-authenticatie vereist
- SSL errors occured accessing URL %1:
SSL-fouten opgetreden bij benaderen van URL %1:
-
Always ignore these errors?
Deze fouten altijd negeren?
- %n SSL errors occured
number of errors
-
- %n SSL-fout opgetreden
- %n SSL-fouten opgetreden
-
+ %n SSL-fout opgetreden %n SSL-fouten opgetreden
@@ -13340,7 +13283,7 @@ Always ignore these errors?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13690,19 +13633,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
Fout
- unknown exception
onbekende fout
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13727,7 +13670,7 @@ Gebruikers DB Pad: %9
-
match indentation of application state
@@ -13735,24 +13678,24 @@ Gebruikers DB Pad: %9
- [ERROR] Can not make qgis.db private copy
[FOUT] Kan geen eigen kopie maken van qgis.db
- Could not open qgis.db
Probleem bij het openen van qgis.db
- Migration of private qgis.db failed.
%1
Migratie van de eigen qgis.db mislukt
%1
- Update of view in private qgis.db failed.
%1
Bijwerken van view in eigen qgis.db mislukt.
@@ -13762,28 +13705,28 @@ Gebruikers DB Pad: %9
QgsAtlasComposition
- Atlas filter eval error: %1
Atlas filter evalueer fout: %1
- Composer
Printvormgeving
- No matching atlas features
Geen overeenkomende atlas objecten
- Atlas feature %1 of %2
Atlas object %1 van %2
- Atlas filename evaluation error: %1
Atlas bestandsnaam evaluatie fout: %1
@@ -13799,7 +13742,7 @@ Gebruikers DB Pad: %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
De opbouw van de bestandsnaam kon niet worden gegeven als '%1'.
@@ -14494,10 +14437,7 @@ Parser fout:
Attribute table - %1 (%n Feature(s))
feature count
-
- Attribuuttabel - %1 (%n Object)
- Attribuuttabel - %1 (%n Objecten)
-
+ Attribuuttabel - %1 (%n Object) Attribuuttabel - %1 (%n Objecten)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Weet u zeker dat u %n favoriete plaats wilt verwijderen?
- Weet u zeker dat u %n favoriete plaatsen wilt verwijderen?
-
+ Weet u zeker dat u %n favoriete plaats wilt verwijderen? Weet u zeker dat u %n favoriete plaatsen wilt verwijderen?
QgsCategorizedSymbolRendererV2Model
- Symbol
Symbool
- Value
Waarde
- Label
Label
@@ -15279,49 +15216,49 @@ Database: %2
Geavanceerd
- Random colors
Willekeurige kleuren
- Symbol levels...
Symboollagen...
- High number of classes!
Hoog aantal classen!
- Classification would yield %1 entries which might not be expected. Continue?
Classificatie zal %1 klassen opleveren wat wellicht onverwacht is. Doorgaan?
- Error
Fout
- There are no available color ramps. You can add them in Style Manager.
Er zijn geen kleurverlopen beschikbaar. U kunt ze toevoegen via de 'Stijlmanager'.
- The selected color ramp is not available.
Het geselecteerde kleurverloop is niet beschikbaar.
- Confirm Delete
Verwijderen Bevestigen
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
Het veld voor klassificatie is veranderd van '%1' naar '%2'
Moeten de bestaande klassen worden verwijderd voor de nieuwe klassificatie?
@@ -15379,25 +15316,20 @@ Moeten de bestaande klassen worden verwijderd voor de nieuwe klassificatie?
QgsColorButton
- Select Color
Selecteer Kleur
- Copy color
Kopieer kleur
- Paste color
Plak kleur
-
- Pick color
-
QgsColorDialog
@@ -15469,7 +15401,7 @@ Moeten de bestaande klassen worden verwijderd voor de nieuwe klassificatie?
Composer
Printvormgeving
@@ -15628,8 +15560,8 @@ Moeten de bestaande klassen worden verwijderd voor de nieuwe klassificatie?
Set as atlas feature for %1
Instellen als atlas-object voor %1
@@ -15666,7 +15598,7 @@ Moeten de bestaande klassen worden verwijderd voor de nieuwe klassificatie?
Choose a file name to save the map as
Kies bestandsnaam om de kaart te bewaren als
@@ -15677,15 +15609,15 @@ Moeten de bestaande klassen worden verwijderd voor de nieuwe klassificatie?
Empty filename pattern
Lege bestandsnaam patroon
The filename pattern is empty. A default one will be used.
Het bestandsnaampatroon is leeg. Er wordt een standaardnaam gebruikt.
@@ -15696,15 +15628,15 @@ Moeten de bestaande klassen worden verwijderd voor de nieuwe klassificatie?
Unable to write into the directory
Kan niet worden geschreven in de map
The given output directory is not writable. Cancelling.
De opgegeven map is niet schrijfbaar. Opdracht wordt geannuleerd.
@@ -15714,251 +15646,251 @@ Moeten de bestaande klassen worden verwijderd voor de nieuwe klassificatie?
Atlas processing error
Atlasproductie-fout
Feature filter parser error: %1
Object filter parser fout: %1
Error creating %1.
Fout tijdens aanmaken van %1.
Rendering maps...
Genereren van kaarten...
Abort
Afbreken
- Big image
Grote afbeelding
- To create image %1x%2 requires about %3 MB of memory. Proceed?
Om de afbeelding van %1x%2 pixels aan te maken is %3 MB geheugen nodig. Doorgaan?
- Choose a file name to save the map image as
Kies een bestandsnaam voor het opslaan van de kaart als
- Memory Allocation Error
Geheugen Allocatie Fout
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
Het aanmaken van afbeelding #%1( %2x%3 @ %4dpi ) kan resulteren in geheugenproblemen.
Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
- Image export error
Fout afbeelding export
- Directory where to save image files
Map waar de afbeeldingen worden opgeslagen
- Image format:
Afbeeldingsformaat:
- SVG warning
SVG waarschuwing
- Don't show this message again
Deze melding niet meer tonen
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>De SVG export functie in QGIS heeft verschillende problemen door fouten en afhankelijkheden in de
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4 svg code. Er zijn problemen bij het clippen van lagen met de huidige kaart-extent</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Als de SVG niet voldoet en u een vectorgebaseerd uitvoerbestand nodig heeft van QGIS, probeer dan naar een PostScript-bestand af te drukken.<p>
- SVG Format
SVG Formaat
- Directory where to save SVG files
Map waar de SVG-bestanden worden opgeslagen
- SVG export error
Fout SVG export
- on page
op pagina
- SVG error
SVG fout
- There was an error in SVG output for SVG layer
Er deed zich een fout voor tijdens het aanmaken van SVG output voor SVG laag
- copy
kopiëren
- Duplicating composer...
Printvormgeving wordt gedupliceerd...
- Duplicate Composer
Dupliceer Printvormgeving
- Composer duplication failed.
Duplicatie van printvormgeving is mislukt.
- Save template
Sjabloon opslaan
- Composer templates
Printvormgeving sjablonen
- Save error
Fout bij opslaan
- Error, could not save file
Fout, bestand opslaan mislukt
- Load template
Sjabloon laden
- Read error
Leesfout
- Error, could not read file
Fout, kan bestand niet lezen
- Composer error
Printvormgeving-fout
- Error, could not create new composer
Fout, er kon geen nieuwe printvormgeving worden gemaakt
- Loading template into composer...
Templatewordt geladen in de printvormgeving...
- Project contains WMS layers
Project bevat WMS-lagen
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Sommige WMS-servers (bijvoorbeeld UMN-mapserver) hebben een beperking op de grootte van WIDTH- en HEIGHT-parameter. Bij het printen kunnen die worden overschreden. In dat geval zal de WMS-laag niet worden geprint
- Project contains composition effects
Project bevat compositie effecten
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Geavanceerde compositie effecten zoals blend modes of vectorlaag transparantie zijn aanwezig in dit project. Deze kunnen niet worden geprint als vectoren. Aangeraden wordt om te printen als raster.
- Print as raster
Als raster afdrukken
- Landscape
Liggend
@@ -17103,67 +17035,67 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
QgsComposerItemWidget
- Frame color changed
Randkleur aangepast
- Background color changed
Achtergrondkleur aangepast
- Item position changed
Onderdeelplaatsing bewerken
- Item outline width
Onderdeel randdikte
- Item frame join style
Onderdeel verbindingsstijl rand
- Item frame toggled
Wel/geen rand omgezet
- Item background toggled
Object achtergrond omgezet
- Select background color
Selecteer achtergrondkleur
- Select frame color
Selecteer randkleur
- Item blend mode changed
Blend modus onderdeel aangepast
- Item transparency changed
Transparantie onderdeel aangepast
- Item id changed
Item id aangepast
- Item rotation changed
Rotatie onderdeel aangepast
@@ -17176,115 +17108,104 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootteGlobale opties
- Position and size
Positie en grootte
- Reference point
Referentiepunt
- X
X
- Y
Y
- Width
Breedte
- Height
Hoogte
- Page
Pagina
- ...
- ...
-
-
- Rotation
Rotatie
- °
°
- Frame
Frame
- mm
mm
- Join style
Verbindingsstijl
- Rendering
Rendering
- Blending mode
Meng-modus
- Thickness
Dikte
- Color...
Kleur...
- Background
Achtergrond
- Transparency
Transparantie
- Item ID
Item ID
- Id
Id
@@ -17317,18 +17238,18 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootteLabelkleur gewijzigd
- Insert expression
Voer expressie in
- Label alignment changed
Label-uitlijning aangepast
@@ -17434,8 +17355,9 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
QgsComposerLegend
+ Legend
- Legenda
+ Legenda
@@ -17600,12 +17522,12 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootteLegendagroep toegevoegd
- Map %1
Kaart %1
- None
Geen
@@ -18035,107 +17957,100 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
QgsComposerMap
- Map %1
Kaart %1
- Map will be printed here
De kaart wordt hier afgedrukt
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Werkgeheugen
- Render
Renderen
- Rectangle
Rechthoek
- Solid
Doorgetrokken
- Cross
Kruis
- Markers
-
-
- Decimal
Decimalen
- DegreeMinute
GradenMinuten
- DegreeMinuteSecond
GradenMinutenSeconden
+ No frame
- Zonder lijst
+ Zonder lijst
- Zebra
Zebra
- Map scale changed
Kaartschaal aangepast
- Map rotation changed
Kaartrotatie aangepast
- Map extent changed
Kaartextent aangepast
- Select font color
Selecteer lettertype kleur
@@ -18151,235 +18066,164 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootteSelecteer grid frame vulkleur
- Canvas items toggled
Kaartvenstenonderdelen omgezet
- None
Geen
- Overview frame style changed
Stijl overzichtskaart aangepast
- Overview centering mode changed
Overzichtskaart centreer modus aangepast
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Kaarteenheid
-
-
- Millimeter
- Millimeter
-
-
- Centimeter
-
-
- change...
- wijzigen...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Gridzichtbaarheid omgezet
- Grid interval changed
Gridinterval aangepast
- Grid offset changed
Gridstartwaarde aangepast
- Grid line style changed
Stijl gridlijnen aangepast
- Grid type changed
Gridtype aangepast
+ Grid cross width changed
- Gridkruizengrootte aangepast
+ Gridkruizengrootte aangepast
- Annotation font changed
Annotatie-lettertype aangepast
+ Label font changed
- Labellettertype aangepast
+ Labellettertype aangepast
- Annotation distance changed
Annotatie-afstand aangepast
- Annotation format changed
Label layout is gewijzigd
- Annotation toggled
Annotatie zichtbaarheid omgezet
- Changed annotation precision
Annotatie-precisie aangepast
- Changed grid frame style
Grid frame stijl gewijzigd
+ Changed grid frame width
- Grid frame breedte gewijzigd
+ Grid frame breedte gewijzigd
- Changed grid frame line thickness
Wijzig lijndikte grid frame lijnen
- Grid frame color changed
Grid frame kleur gewijzigd
- Grid frame first fill color changed
Grid frame eerste vulkleur gewijzigd
- Grid frame second fill color changed
Grid frame tweede vulkleur gewijzigd
- Inside frame
Binnen venster
- Outside frame
Buiten venster
- Disabled
Uitgeschakeld
- Horizontal
Horizontaal
- Vertical
Verticaal
- Annotation position changed
Annotatie-positionering aangepast
- Changed annotation direction
Annotatie-richting aangepast
- Map %1
Kaart %1
@@ -18392,377 +18236,287 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootteKaart-opties
- Map
Kaart
- Main properties
Algemene eigenschappen
- Update preview
Voorvertoning bijwerken
- Scale
Schaal
- Map rotation
Kaartrotatie
- Draw map canvas items
Kaartvenster objecten tekenen
- Lock layers for map item
Lagen vastzetten voor kaartonderdeel
- Extents
Extents
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
aanpassen aan kaartformaat
- X min
X min
- View extent in map canvas
Toon extent in kaartvenster
- Controlled by atlas
Beheerd door atlas
- Margin around feature
Marge rond object
- %
%
- Fixed scale
Vaste schaal
- Use one of the predefined scales of the project where the atlas feature best fits.
Gebruik 1 van voorgedefinieerde schalen van het project waarvoor het atlas object het beste past.
- Predefined scale (best fit)
Voorgedefinieerde schaal (best passend)
+ Show grid
- Toon grid
+ Toon grid
+ Grid &type
- &Type Grid
+ &Type Grid
- Offset
Verspringing
- mm
mm
- Blend mode
Meng-modus
- Interval
Interval
- Grid frame
Grid frame
- Frame size
Frame grootte
- Frame line thickness
Frame lijndiktes
- Color...
Kleur...
- Frame fill colors
Frame vulkleuren
- Marker style
- Markerstijl
-
-
- Overview blending mode
Overzicht blending modus
- Invert overview
Inverteren overzichtskaart
- Center on overview
Cenreer in overzichtskaart
- X
X
- °
°
- Y
Y
- Cross width
Kruisdikte
- Frame style
Randstijl
- Line style
Lijnstijl
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Type grid
-
-
- CRS
- CRS
-
-
- change...
wijzigen...
- Interval units
-
-
- Map unit
- Kaarteenheid
-
-
- Millimeter
- Millimeter
-
-
- Centimeter
-
-
- No frame
- Zonder lijst
-
-
- Zebra
- Zebra
-
-
- Draw coordinates
Teken coördinaten
- Format
Formaat
- Left
Links
- Right
Rechts
- Top
Boven
- Bottom
Onder
- Font
Lettertype
- Font...
Lettertype...
- Font color
- Lettertype kleur
-
-
- Distance to map frame
Afstand tot kaartvenster
- Coordinate precision
Coördinaat precisie
- Font color...
Lettertype kleur...
- Overview
Kaartoverzicht
- Overview frame
Overzichtskaartje
- Overview style
Overzichtstijl
- Change...
Wijzigen...
@@ -18803,18 +18557,18 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
QgsComposerPicture
- Picture expression parsing error: %1
Fout bij parseren van Afbeelding expressie: %1
- Composer
Printvormgeving
- Picture expression eval error: %1
Afbeelding expressie evaluatiefout: %1
@@ -18829,64 +18583,64 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
Picture changed
Afbeelding is veranderd
- Expression based image path
Expressiegebaseerd afbeeldingspad
- Picture rotation changed
Afbeeldingrotatie is veranderd
- Select new preview directory
Selecteer een map voor de voorvertoning
- Picture resize mode changed
Modus formaat aanpassen gewijzigd
- Picture placement changed
Plaatsing afbeelding gewijzigd
- Picture source changed
Bron afbeelding is gewijzigd
- Picture source expression
Expressie bron afbeelding
- Rotation synchronisation toggled
Rotatie-synchronisatie omgezet
- Rotation map changed
Rotatie kaart aangepast
- Map %1
Kaart %1
- Creating icon for file %1
Aanmaken icon voor bestand %1
@@ -19053,32 +18807,32 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
QgsComposerScaleBar
- units
eenheden
- km
km
- m
m
- miles
mijlen
- ft
ft
- Nm
NM
@@ -19087,38 +18841,38 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootteQgsComposerScaleBarWidget
Single Box
Enkele Rechthoek
Double Box
Dubbele Rechthoek
Line Ticks Middle
Schaalstreepjes Midden
Line Ticks Down
Schaalstreepjes Onder
Line Ticks Up
Schaalstreepjes Boven
Numeric
Numeriek
@@ -19158,144 +18912,119 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootteZeemijlen
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Selecteer lettertype kleur
-
-
- Select stroke color
-
-
- Map %1
Kaart %1
- Scalebar map changed
Schaalbalk kaart aangepast
- Scalebar line width
Schaalbalk lijndikte
- Scalebar segment size
Schaalbalk segmentgrootte
- Scalebar segments left
Schaalbalk segmenten links
- Number of scalebar segments changed
Het aantal schaalbalk kaarteenheden per segment is veranderd
- Scalebar height changed
Schaalbalkhoogte aangepast
- Scalebar font changed
Schaalbalk lettertype aangepast
- Scalebar font color changed
Tekstkleur schaalbalk aangepast
- Scalebar color changed
Schaalbalkkleur aangepast
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Schaduwkleur schaalbalk aangepast
- Scalebar unit text
Schaalbalk eenheidtekst
- Scalebar map units per segment
Schaalbalk kaarteenheden per segment
- Scalebar style changed
Schaalbalk stijl aangepast
- Scalebar label bar space
Schaalbalk labeltussenruimte
- Scalebar box content space
Schaalbalk boxtussenruimte
- Scalebar alignment
Schaalbalk uitlijning
- Scalebar changed to map units
Eenheid schaalbalk gewijzigd naar kaarteenheden
- Scalebar changed to feet
Eenheid schaalbalk gewijzigd naar voet
- Scalebar changed to nautical miles
Eenheid schaalbalk gewijzigd naar zeemijlen
- Scalebar changed to meters
Eenheid schaalbalk gewijzigd naar meter
- Scalebar line join style
Verbindingsstijl schaalbalk lijn
- Scalebar line cap style
Stijl schaalbalk eindkap lijn
@@ -19438,11 +19167,6 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
Secondary fill color...
-
-
- Stroke color...
Schaduwkleur...
@@ -19452,37 +19176,37 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
Ellipse
Ellipse
Rectangle
Rechthoek
Triangle
Driehoek
- Shape style changed
Stijl vorm aangepast
- Shape radius changed
Radius object aangepast
- Shape type changed
Object type aangepast
@@ -19893,107 +19617,107 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
QgsComposition
- Label added
Label toegevoegd
- Map added
Map toegevoegd
- Arrow added
Pijl toegevoegd
- Scale bar added
Schaalbalk toegevoegd
- Shape added
Tekenobject toegevoegd
- Picture added
Afbeelding toegevoegd
- Legend added
Legenda toegevoegd
- Table added
Tabel toegevoegd
- Aligned items left
Onderdele links uitlijnen
- Aligned items horizontal center
Objecten uitlijnen op midden horizontaal
- Aligned items vertical center
Objecten uitlijnen op midden vertikaal
- Aligned items right
Onderdelen rechts uitlijnen
- Aligned items top
Onderdelen boven uitlijnen
- Aligned items bottom
Onderdelen onder uitlijnen
- Items locked
Onderdelen vastgezet
- Items unlocked
Onderdelen losgemaakt
- Item z-order changed
Onderdelen z-volgorde aangepast
- Remove item group
Verwijder onderdeelgroep
- Frame deleted
Frame verwijderd
- Item deleted
Onderdeel verwijderd
- Multiframe removed
Multiframe verwijderd
@@ -20050,148 +19774,148 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergrootte
Landscape
Liggend
Portrait
Staand
Map %1
Kaart %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
Aangepast
@@ -20209,131 +19933,109 @@ Probeer alstublieft een lagere resolutie of een kleiner papiergroottePapier en kwaliteit
- Presets
Voorinstellingen
- ...
- ...
-
-
- Width
Breedte
- Height
Hoogte
- Units
Eenheden
- Number of pages
Aantal pagina's
- Orientation
Oriëntatie
- Export resolution
Export resolutie
- Print as raster
Als raster afdrukken
-
- Snap tolerance
- 'Snap'-tolerantie
-
-
- px
- px
-
Change...
Wijzigen...
- Page background
Pagina achtergrond
+ Grid
- Grid
+ Grid
- dpi
dpi
- World file on
'World file' aan
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Grid verspringing
- x:
x:
- y:
y:
+ Spacing
- Tussenruimte
+ Tussenruimte
+ Snap to alignments
- Snappen naar uitlijning
+ Snappen naar uitlijning
+ Tolerance
- Tolerantie
+ Tolerantie
@@ -21508,7 +21210,7 @@ en het huidige bestand is [%3]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23247,7 +22949,7 @@ Laat leeg wanneer automatisch de maximum waarde moet worden toegepast.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Kolom '%1' kan niet worden gebruik als voorvertoningskolom.
@@ -23576,7 +23278,7 @@ Parser fout:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23589,7 +23291,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24690,7 +24392,7 @@ MyForms.py moet aanwezig zijn in PYTHONPATH, .qgis/python, of in de projectfolde
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26008,7 +25710,7 @@ Selecteer alstublieft een geldig bestand.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26960,17 +26662,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Symbool
- Value
Waarde
- Label
Label
@@ -27063,40 +26765,40 @@ p, li { white-space: pre-wrap; }
Geavanceerd
- Symbol levels...
Symboollagen...
- Error
Fout
- There are no available color ramps. You can add them in Style Manager.
Er zijn geen kleurverlopen beschikbaar. U kunt ze toevoegen via de 'Stijlmanager'.
- The selected color ramp is not available.
Het geselecteerde kleurverloop is niet beschikbaar.
- Warning
Waarschuwing
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
Natuurlijke Grenzen-classificatie (Jenks) is complex, je classificatie kan lang duren. Druk op Afbreken om de berekening te stoppen of op OK om verder te gaan.
- Renderer creation has failed.
Aanmaken van renderer is mislukt.
@@ -27280,10 +26982,7 @@ Press cancel to abort breaks calculation or OK to continue.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Weet u zeker dat u %n geselecteerde laag wilt verwijderen?
- Weet u zeker dat u de %n geselecteerde lagen wilt verwijderen?
-
+ Weet u zeker dat u %n geselecteerde laag wilt verwijderen? Weet u zeker dat u de %n geselecteerde lagen wilt verwijderen?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">De GRASS data wordt opgeslagen in een boomstructuur. De GRASS-database is de top van deze structuur.</p></body></html>
@@ -29035,7 +28734,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">Een GRASS-locatie is een verzameling kaarten van een bepaald gebied of project.</p></body></html>
@@ -29070,7 +28769,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">(new line)
<html><head><meta name="qrichtext" content="1" /><style type="text/css">(new line)
@@ -29144,7 +28843,7 @@ p, li { white-space: pre-wrap; }(new line)
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">Een GRASS mapset is een door een gebruiker gebruikte kaartcollectie. Een gebruiker kan alle meapset in dezelfde 'location' inlezen, maar kan alleen zijn eigen kaarten aanpassen.</p></body></html>
@@ -29907,10 +29606,7 @@ in regel %2 kolom %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Er is nog %n niet verwerkte laag, die gaan verloren als u nu afsluit.
- Er zijn nog %n niet verwerkte lagen, die gaan verloren als u nu afsluit.
-
+ Er is nog %n niet verwerkte laag, die gaan verloren als u nu afsluit. Er zijn nog %n niet verwerkte lagen, die gaan verloren als u nu afsluit.
@@ -30040,12 +29736,9 @@ in regel %2 kolom %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Netwerkverbinding verbroken na %n seconde van inaktiviteit.
-Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.
- Netwerkverbinding verbroken na %n seconden van inaktiviteit.
-Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.
-
+ Netwerkverbinding verbroken na %n seconde van inaktiviteit.
+Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server. Netwerkverbinding verbroken na %n seconden van inaktiviteit.
+Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.
@@ -31240,7 +30933,7 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.Instellingen Laag-labeling
- Label this layer with
Deze laag labelen met
@@ -31320,22 +31013,22 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.
...
...
@@ -31391,7 +31084,7 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.Meerdere tekstregels
- Automated placement settings (apply to all layers)
Instellingen automatische plaatsing (toepassen op alle lagen)
@@ -31421,7 +31114,7 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.
Rendering
Rendering
@@ -31509,7 +31202,7 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.
Alignment
Uitlijning
@@ -31546,7 +31239,7 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.Herhaal
- Discourage labels from covering features
Voorkom dat labels objecten overschrijven
@@ -31641,82 +31334,82 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.Buffer
- Labels will not show if larger than this on screen
Labels zullen niet getoond worden indien groter dan deze op het venster
- px
px
- Data defined
Data gedefinieërd
- X
X
- Y
Y
- Coordinate
Coordinaat
- Preserve data rotation values
Behoud data rotatie waarden
- horizontal
horizontaal
- vertical
verticaal
- Label options
Label opties
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Waarde < 0 betekend een schaal kleiner dan 1:1, b.v. -10 = 10:1<br>Waarde van 0 schakelt deze limiet uit.
- Maximum
Maximum
- Pixel size-based visibility (labels in map units)
Getoonde is gebaseerd op pixelgrootte (labels in kaarteenheden)
- Labels will not show if smaller than this on screen
Labels zullen niet getoond worden indien kleiner dan deze op het venster
- Minimum
Minimum
@@ -31726,7 +31419,7 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.<
- Scale-based visibility
Schaalgebaseerde zichtbaarheid
@@ -31764,17 +31457,17 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.Omgekeerde richting
- Priority
Prioriteit
- Low
Laag
- High
Hoog
@@ -31927,7 +31620,7 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.
Rotation
Rotatie
@@ -31979,17 +31672,17 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.Afstand
- outside
buiten
- inside
binnen
- Maximum angle between curved characters
Maximale hoek tussen bochtvolgende karakters
@@ -32095,62 +31788,62 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.Symbool eenheden
- Merge connected lines to avoid duplicate labels
Aan elkaar verbonden lijnen samenvoegen om labelduplicaten te voorkomen
- Label every part of multi-part features
Elk deel van een samengesteld object labelen
- Feature options
Mogelijkheden
- Suppress labeling of features smaller than
Onderdruk labeling van objecten kleiner dan
- mm
mm
- Show all labels for this layer (including colliding labels)
Toon alle label voor deze laag (inclusief conflicterende labels)
- Show upside-down labels
Toon labels die ondersteboven staan
- never
nooit
- when rotation defined
wanneer rotatie is gegeven
- always
altijd
- Limit number of features to be labeled to
Stel het maximale aantal te labelen objecten in op
- Number of features sent to labeling engine, though not all may be labeled
Aantal objecten naar labeling engine, deze krijgen wellicht niet allemaal een label
@@ -32160,17 +31853,17 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.Positie
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Uitvinken voor labeling engine afhankelijke rotatie rond vast punt en NULL wanneer vast punt wordt verwijderd
- Always show
Toon altijd
- Show label
Toon label
@@ -32186,12 +31879,12 @@ Er kan een probleem zijn met uw netwerkverbinding, of bij de WMS-server.
QgsLayerTreeModel
- Double-click to view legend
Dubbelklik om legenda te bekijken
- following %1 items
not displayed
Volgende %1 onderdelen
@@ -32249,12 +31942,12 @@ worden niet getoond
QgsLegendModel
- Group
Groepeer
- No Legend Available
Geen Legenda Beschikbaar
@@ -32482,18 +32175,18 @@ worden niet getoond
QgsMapCanvas
- canvas
kaartvenster
- Rendering
Rendering
- Canvas refresh: %1 ms
Kaartvenster verversen: %1 ms
@@ -33684,10 +33377,7 @@ eigenschappen
%n more
unread messages
-
- %n meer
- %n meer
-
+ %n meer %n meer
@@ -33824,7 +33514,7 @@ eigenschappen
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Connectie verbroken - Hostnaam niet gespecificeerd.
@@ -33833,7 +33523,7 @@ eigenschappen
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Connectie verbroken - Databasenaam niet gespecificeerd.
@@ -35385,10 +35075,7 @@ Uitgebreide foutinformatie:
Coordinate Reference System (%n available)
crs count
-
- Ruimtelijke Referentie Systemen (%n beschikbaar)
- Ruimtelijke Referentie Systemen (%n beschikbaar)
-
+ Ruimtelijke Referentie Systemen (%n beschikbaar) Ruimtelijke Referentie Systemen (%n beschikbaar)
Solid
Doorgetrokken
Dots
Stippels
Crosses
Kruisjes
- Detected active locale on your system: %1
Gedetecteerde huidige 'locale' op uw systeem: %1
- To vertex
Naar hoekpunt
- To segment
Naar segment
- To vertex and segment
Naar hoekpunt en segment
- map units
kaarteenheden
- pixels
pixels
- Semi transparent circle
Semi transparante cirkel
- Cross
Kruis
- None
Geen
- QGIS files
QGIS bestanden
- Off
Uit
- QGIS
QGIS
- GEOS
GEOS
- Round
Rond
- Mitre
Puntig
- Bevel
Hoekig
- Save default project
standaard projectbestand opslaan
- You must set a default project
Stel eerst een standaardproject in
- Current project saved as default
Huidige project als standaardproject opgeslagen
- Error saving current project as default
Fout bij het opslaan van het huidige project als standaardproject
- Choose a directory to store project template files
Kies een map om projectsjablonen op te slaan
@@ -36516,105 +36203,105 @@ Altijd netwerk: altijd ophalen uit het netwerk, en niet checken of er misschien
Toon objecten zichtbaar op kaart
- Choose project file to open at launch
Kies een projectbestand dat geopend wordt bij het starten
- Create Options - %1 Driver
Schrijf-opties - %1 driver
- Create Options - pyramids
Schrijf-opties - pyramides
- Restore UI defaults
UI-standaardwaarden herstellen
- Are you sure to reset the UI to default (needs restart)?
Weet je zeker dat je de UI-standaardwaarden wilt herstellen? (herstarten noodzakelijk)
- Overwrite
Overschrijf
- If Undefined
Indien niet gedefiniëerd
- Unset
Definitie verwijderen
- Prepend
Voorvoegen
- Append
Toevoegen
- Choose a directory
Kies een map
- Enter scale
Voer schaal in
- Scale denominator
Schaalgetal
- Load scales
Schalen laden
- XML files (*.xml *.XML)
XML bestanden (*.xml *.XML)
- Save scales
Schalen opslaan
- No Stretch
Geen 'Strech'
- Stretch To MinMax
'Stretch' tot MinMax
- Stretch And Clip To MinMax
'Stretch' en 'Clip' tot MinMax
- Clip To MinMax
Clip naar MinMax
@@ -36634,7 +36321,7 @@ Altijd netwerk: altijd ophalen uit het netwerk, en niet checken of er misschien
General
Algemeen
@@ -36817,7 +36504,7 @@ Altijd netwerk: altijd ophalen uit het netwerk, en niet checken of er misschien
...
...
@@ -36933,7 +36620,7 @@ Altijd netwerk: altijd ophalen uit het netwerk, en niet checken of er misschien
Remove
Verwijder
@@ -36941,7 +36628,7 @@ Altijd netwerk: altijd ophalen uit het netwerk, en niet checken of er misschien
Add
Toevoegen
@@ -37201,22 +36888,7 @@ Altijd netwerk: altijd ophalen uit het netwerk, en niet checken of er misschien
Minimum breedte lijn/omlijning in millimeters.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Voorkom tonen van attributenformulier na intekenen object
@@ -37513,18 +37185,22 @@ Altijd netwerk: altijd ophalen uit het netwerk, en niet checken of er misschien
Kleur...
+ Grid defaults
- Ruitennetstandaarden
+ Ruitennetstandaarden
+ Spacing
- Tussenruimte
+ Tussenruimte
mm
mm
@@ -37545,370 +37221,372 @@ Altijd netwerk: altijd ophalen uit het netwerk, en niet checken of er misschien
Snap tolerance
'Snap'-tolerantie
+ Guide defaults
- Hulplijnstandaarden
+ Hulplijnstandaarden
- Feature creation
Objectcreatie
- Validate geometries
Valideer geometriën
- Reuse last entered attribute values
Laatst ingevoerde attribuutwaarden gebruiken
- Rubberband
Rubberband
- Line color
Lijnkleur
- Line width in pixels
Lijndikte in pixels
- Line width
Lijndikte
- Snapping
Snapping
- Default snap mode
Standaard 'snap'-modus
- Default snapping tolerance
Standaard 'snapping'-tolerantie
- Search radius for vertex edits
Zoekradius voor hoekpuntaanpassingen
- map units
kaart eenheden
pixels
pixels
- Open snapping options in a dock window (QGIS restart required)
Open snap-opties in een 'dock window' (QGIS herstart vereist)
- Vertex markers
Hoekpunten
- Marker style
Markerstijl
- Marker size
Markergrootte
- Show markers only for selected features
Markers alleen gebruiken voor geselecteerde objecten
- Curve offset tool
Lijnverspring-gereedschap
- Miter limit
Maximale puntlengte bij scherpe hoeken
- Join style
Verbindingstijl
- Quadrant segments
Segmenten per kwadrant
- GDAL driver options
GDAL driver opties
- Edit Pyramids Options
Pyramide-opties aanpassen
- Edit Create Options
Schrijf-opties aanpassen
- GDAL drivers
GDAL drivers
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
In sommige gevallen kan meer dan één GDAL-driver gebruikt worden om hetzelfde rasterformaat te laden. Gebruik onderstaande lijst om te specificeren welke gebruikt moet worden.
- Name
Naam
- ext
ext
- Flags
acties
- Description
Omschrijving
- CRS for new layers
CRS voor nieuwe kaartlagen
- Select...
Selecteren...
- Use &project CRS
Gebruik huidige &project CRS
- Prompt for &CRS
Vraag om &CRS
- Use default CRS displa&yed below
Gebruik het &standaard CRS zoals hieronder getoond
- When a new layer is created, or when a layer is loaded that has no CRS
Wanneer een nieuwe laag is aangemaakt, of wanneer een laag zonderCRS is geladen
- Default CRS for new projects
Standaard CRS voor nieuwe projecten
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Automatisch gelijktijdige CRS-transformatie inschakelen wanneer een kaartlaag wordt toegevoegd met een andere CRS dan de aanwezige kaartlagen. CRS van de aanwezige kaartlagen zal worden gebruikt.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Automatisch gelijktijdige CRS-transformatie inschakelen indien kaartlagen verschillen van CRS
- Always start new projects with this CRS
Altijd dit CRS gebruiken voor nieuwe projecten
- Enable 'on the &fly' reprojection by default
Gelijktijdige CRS-trans&formatie gebruiken
- Don't enable 'on the fly' reprojection
Gelijktijdige herprojectie uitschakelen
- Default datum transformations
Standaard datumtransformaties
- Source CRS
Bron CRS
- Destination CRS
Doel CRS
- Source datum transform
Bron datumtransformatie
- Destination datum transform
Doel datumtransformatie
- Ask for datum transformation when no default is defined
Vraag om datumtransformatie als deze niet standaard is ingesteld
- Override system locale
Systeem locale negeren
- Locale to use instead
Te gebruiken locale
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Opmerking:</b> Voor het aanpassen van de locale/taal moet het programma worden herstart
- Additional Info
Aanvullende Informatie
- Detected active locale on your system:
Gedetecteerde actieve locale op uw systeem:
- WMS search address
WMS zoekadres
- Timeout for network requests (ms)
'Timeout' voor netwerkaanvragen (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Standaard verlooptijd van WMS-C/WMTS tegels (uur)
- Max retry in case of tile request errors
Maximum aantal pogingen bij tile request fouten
- User-Agent
User-Agent
- Cache settings
Cache instellingen
- Directory
Map
- Size [KiB]
Grootte [KiB]
- Clear
Leegmaken
- Use proxy for web access
Gebruik een proxy voor internettoegang
- Host
Host
- Port
Poort
- User
Gebruiker
- Leave this blank if no proxy username / password are required
Laat dit leeg als gebruikersnaam/wachtwoord niet nodig zijn
- Password
Wachtwoord
- Proxy type
Proxy type
- Exclude URLs (starting with)
URLs uitsluiten (beginnend met)
@@ -39878,7 +39556,7 @@ Fout: %2
Plugin is verdwenen
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
De plugin lijkt geïnstalleerd, maar het is niet duidelijk waar. Waarschijnlijk bevatte het pluginpakket een verkeerde mapnaam.
Zoek in de lijst van geïnstalleerde plugins. Het is waarschijnlijk dat de plugin er tussen staat, alleen kan het programma niet onderscheiden welk het precies is. Dit betekent ook dat u niet geïnformeerd kan worden over updates. De plugin werkt misschien wel. Neem contact op met de bouwer van de plugin en meld deze fout.
@@ -40601,7 +40279,7 @@ U dient Quantum GIS te herstarten om de plugin te laden.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Opmerking:</span>Als u dit instelt zal QGIS u op de hoogte stellen wanneer er een nieuwe plugin is of er een nieuwere versie van een plugin is. In het andere geval zal de informatie worden opgehaald tijdens het openen van de 'Beheer en installeer plugins'-dialoog.</p></body></html>
@@ -40615,7 +40293,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"><html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Opmerking:</span> Experimentele plugins zijn niet bruikbaar in een produktieomgeving. Het zijn eerste versies, en moeten gezien worden als 'nog niet af' of 'probeersels'. QGIS raadt deze plugins niet aan, behalve als u iets wilt uittesten.</p></body></html>
@@ -40629,7 +40307,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41493,156 +41171,156 @@ Kies 'negeren' om door te gaan zonder deze lagen. Kies 'annuleren
QgsProjectProperties
- Layer
Laag
- Type
Type
- Identifiable
Identificeerbaar
- Vector
Vector
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
Coördinaatsystemen Beperken
- No coordinate systems selected. Disabling restriction.
Geen coördinaatsystemen geselecteerd. Begrenzing verwijderd.
- Selection color
Selectie-kleur
- Measure tool (CRS transformation: %1)
Meetgereedschap (CRS-transformatie %1)
- Canvas units (CRS transformation: %1)
Kaartvenster eenheden (CRS-transformatie %1)
+ OFF
UIT
+ ON
AAN
- CRS %1 was already selected
CRS %1 is al geselecteerd
- Coordinate System Restrictions
Coördinaatsystemen Beperkingen
- The current selection of coordinate systems will be lost.
Proceed?
De huidige selectie van ruimtelijk referentie systemen zal verloren gaan.
Doorgaan?
- Select print composer
Selecteer printvormgeving
- Composer Title
Printvormgevings-titel
- Select restricted layers and groups
Selecteer lagen en groepen met restricties
- Enter scale
Voer schaal in
- Scale denominator
Schaalgetal
- Load scales
Schalen laden
- XML files (*.xml *.XML)
XML-bestanden (*.xml *.XML)
- Save scales
Schalen opslaan
- Select a valid symbol
Selecteer een geldig symbool
- Invalid symbol :
Ongeldig symbool :
- Parameters:
Parameters:
+ Select %1 from pull-down menu to adjust radii
Selecteer %1 uit het afrolmenu om de radii aan te passen
- Can only use ellipsoidal calculations when CRS transformation is enabled
Gebruik van ellipsoïdische berekeningen kan alleen als CRS-transformatie is ingeschakeld
@@ -41667,7 +41345,6 @@ Doorgaan?
Project title
Project titel
@@ -41707,37 +41384,37 @@ Doorgaan?
Paden opslaan
- Measure tool
Meetgereedschap
- Semi-minor
Korte as
- Semi-major
Lange as
- Used when CRS transformation is turned off
Gebruikt wanneer CRS-transformatie is uitgeschakeld
- Canvas units
Kaarteenheden
- Meters
Meters
- Feet
Voet
@@ -41769,98 +41446,98 @@ Doorgaan?
OWS Server
- Ellipsoid
(for distance calculations)
Ellipsoïde
(voor afstandberekeningen)
- Degree
Graden
- Degree display
Graden tonen
- Decimal degrees
Decimale graden
- Degrees, Minutes
Graden, Minuten
- Degrees, Minutes, Seconds
Graden, Minuten, Seconden
- Precision
Precisie
- Automatically sets the number of decimal places in the mouse position display
Het aantal decimalen in de muispositie-vertoning automatisch bepalen
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Het aantal decimalen om de muispositie te toen wordt automatisch ingesteld op die waarde dat een verschuiving van de muis met 1 pixel ook een verandering in de muispositie toont
- Automatic
Automatisch
- Sets the number of decimal places to use for the mouse position display
Bepaald het aantal decimalen bij de muispositie-vertoning
- Manual
Handmatig
- The number of decimal places for the manual option
Het aantal decimalen bij de handmatige optie
- decimal places
Decimale posities
- Project scales
Projectschalen
- ...
...
- Enable 'on the fly' CRS transformation
Gelijktijdige CRS-transformatie gebruiken
@@ -41870,69 +41547,69 @@ Doorgaan?
Identificeerbare lagen
- Project layers
Project-lagen
- Layer
Laag
- Type
Type
- Identifiable
Identificeerbaar
- Marker
Puntsymbool
- Line
Lijn
- Default symbols
Standaard symbolen
- Fill
Vulling
- Color Ramp
Kleurverloop
- Transparency
Transparantie
- %
%
- Style Manager
Stijlmanager
- Options
Opties
@@ -41942,170 +41619,165 @@ Doorgaan?
Relaties
- Project file
- Project-bestand
-
-
- Nautical miles
Zeemijlen
- Assign random colors to symbols
Willekeurige kleuren aan symbolen toekennen
- Service capabilities
Service-mogelijkheden (Capabilities)
- Person
Persoon
- Title
Titel
- Organization
Organisatie
- Online resource
Online resource
- E-Mail
E-Mail
- Phone
Telefoon
- Abstract
Beschrijving
- Fees
Kosten
- Access constraints
Toegangsbeperkingen
- Keyword list
Sleutelwoordenlijst
- WMS capabilities
WMS-mogelijkheden
- Add geometry to feature response
Geometrie aan feature response toevoegen
- Min. X
Min. X
- Min. Y
Min. Y
- Max. X
Max. X
- Max. Y
Max. Y
- Use Current Canvas Extent
Huidige Extent van Kaartvenster gebruiken
- Used
Huidige gebruikte
- Exclude composers
Printvormgeving uitsluiten
- WFS capabilities
WFS-mogelijkheden
- WCS capabilities
WCS-mogelijkheden
- Exclude layers
Kaartlagen uitsluiten
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
Kwaliteit voor JPEG images ( 10 : kleinere afbeelding - 100 : beste kwaliteit )
- Published
Gepubliceerd
- Update
Bijwerken
- Insert
Toevoegen
- Delete
Verwijderen
- Unselect all
Deselecteer alles
- Select all
Selecteer alles
@@ -42116,39 +41788,39 @@ Doorgaan?
Macro's
- Advertised URL
Gegeven URL
- Width
Breedte
- Height
Hoogte
- Maximums for GetMap request
Maximums voor GetMap-request
- Advertised extent
Gegeven extent
- CRS restrictions
CRS-beperkingen
- Python macros
Python-macro's
@@ -42262,10 +41934,7 @@ Hierdoor zal het kiezen van een projectie niet werken...
The where clause returned %n row(s).
returned test rows
-
- Het 'where'-filter levert %n rij op.
- Het 'where'-filter levert %n rijen op.
-
+ Het 'where'-filter levert %n rij op. Het 'where'-filter levert %n rijen op.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42339,7 +42008,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42350,7 +42019,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42366,7 +42035,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -44032,7 +43701,7 @@ Klik op de help knop om geldige schrijf-opties voor dit type te verkrijgen.<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45112,10 +44781,7 @@ standaarddeviatie x
Filter returned %n feature(s)
number of filtered features
-
- Filter levert %n object
- Filter levert %n objecten
-
+ Filter levert %n object Filter levert %n objecten
@@ -45805,10 +45471,7 @@ standaarddeviatie x
Found %n matching feature(s).
test result
-
- %n passend object gevonden.
- %n passende objecten gevonden.
-
+ %n passend object gevonden. %n passende objecten gevonden.
Validation finished (%n error(s) found).
number of geometry errors
-
- Validatie klaar (%n fout gevonden).
- Validatie klaar (%n fouten gevonden).
-
+ Validatie klaar (%n fout gevonden). Validatie klaar (%n fouten gevonden).
%n selected geometries
selected geometries
-
- %n geselecteerde geometrie
- %n geselecteerde geometrieën
-
+ %n geselecteerde geometrie %n geselecteerde geometrieën
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47363,7 +47020,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47975,8 +47632,8 @@ Wilt u de relatie [%2] overschrijven?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -48013,124 +47670,152 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Interface kan niet worden geladen
+ Interface kan niet worden geladen
+ Failed to connect to database
- Verbinding met database mislukt
+ Verbinding met database mislukt
+ A connection to the SQL Anywhere database cannot be established.
- Er kan geen verbinding met de SQL Anywhere database worden gemaakt.
+ Er kan geen verbinding met de SQL Anywhere database worden gemaakt.
+ No suitable key column
- Geen bruikbare sleutelkolom
+ Geen bruikbare sleutelkolom
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- De bron relatie %1 heeft geen kolom die gebruikt kan worden als unieke sleutel.
+ De bron relatie %1 heeft geen kolom die gebruikt kan worden als unieke sleutel.
QGIS vereist dat een relatie een integer kolom heeft van minder dan 32 bits met alleen unieke waarden.
+ Error loading attributes
- Fout bij laden van attributen
+ Fout bij laden van attributen
+ Ambiguous field!
- Unduidelijk veld!
+ Unduidelijk veld!
+ Duplicate field %1 found
- Dubbel veld %1 gevonden
+ Dubbel veld %1 gevonden
+ Read attempt on an invalid SqlAnywhere data source
- Leespoging naar een ongeldige SqlAnywhere database
+ Leespoging naar een ongeldige SqlAnywhere database
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Fout bij het toevoegen van objecten
+ Fout bij het toevoegen van objecten
+ Error deleting features
- Fout bij het verwijderen van objecten
+ Fout bij het verwijderen van objecten
+ Error adding attributes
- Fout bij het toevoegen van attributen
+ Fout bij het toevoegen van attributen
+ Error deleting attributes
- Fout bij het verwijderen van attributen
+ Fout bij het verwijderen van attributen
+ Attribute not found
- Attribuut niet gevonden
+ Attribuut niet gevonden
+ Error updating attributes
- Fout bij het bijwerken van attributen
+ Fout bij het bijwerken van attributen
+ Error updating features
- Fout bij het bijwerken van objecten
+ Fout bij het bijwerken van objecten
+ Error verifying geometry column %1
- Fout bij het controleren van geometrieveld %1
+ Fout bij het controleren van geometrieveld %1
+ Unknown geometry type
- Onbekend geometrie-type
+ Onbekend geometrie-type
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- Kolom %1 heeft een geometrie-type %2 dat momenteel niet door QGIS wordt ondersteund.
+ Kolom %1 heeft een geometrie-type %2 dat momenteel niet door QGIS wordt ondersteund.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- Kolom %1 is niet beperkt tot een enkel SRID, wat nodig is voor QGIS.
+ Kolom %1 is niet beperkt tot een enkel SRID, wat nodig is voor QGIS.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Omdat QGIS alleen data in het platte vlak ondersteund, zal de SQL Anywhere-data provder de data omzetten naar een bruikbare cartesische projectie (SRID=%1).
+ Omdat QGIS alleen data in het platte vlak ondersteund, zal de SQL Anywhere-data provder de data omzetten naar een bruikbare cartesische projectie (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Omdat QGIS alleen vlakke data ondersteund en er geen vlakke data projectie is gevonden, zal de SQL Anywhere provider proberen de data te transformeren naar WGS 84 (SRID=%1).
+ Omdat QGIS alleen vlakke data ondersteund en er geen vlakke data projectie is gevonden, zal de SQL Anywhere provider proberen de data te transformeren naar WGS 84 (SRID=%1).
+ Mixed Spatial Reference Systems
- Verschillende ruimtelijke referentiesystemen
+ Verschillende ruimtelijke referentiesystemen
+ Error checking database ReadOnly property
- Fout bij het controleren van de AlleenLezen-eigenschap van de database
+ Fout bij het controleren van de AlleenLezen-eigenschap van de database
+ Error loading SRS definition
- Fout bij het laden van de SRS-definitie
+ Fout bij het laden van de SRS-definitie
+ Limited Support of Round Earth SRS
- Beperkte ondersteuning voor "Round Earth SRS"
+ Beperkte ondersteuning voor "Round Earth SRS"
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- Kolom %1 (%2) bevat geometrieën in een Round Earth SRS (SRID=%3). %4
+ Kolom %1 (%2) bevat geometrieën in een Round Earth SRS (SRID=%3). %4
Het bijwerken van geometrie wordt uitgeschakeld, en queries kunnen langzamer worden uitgevoerd omdat de ruimtelijke index niet kan worden gebruikt. Overweeg een ruimtelijke index te maken op een nieuwe (nog te berekenen) kolom met deze geometrieën in een vlakke projectie om de snelheid te verbeteren. Kijk voor hulp in de beschrijvingen van ST_SRID(INT) en ST_Transform(INT) methodes in de SQL Anywhere documentatie.
@@ -48265,14 +47950,14 @@ Het bijwerken van geometrie wordt uitgeschakeld, en queries kunnen langzamer wor
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Er is al een symbool met de naam '%1'.
Overschrijven?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Er is al een kleurverloop met de naam '%1'.
Overschrijven?
@@ -49405,7 +49090,7 @@ m elementen te verplaatsen. De linker (pijl naar rechts icoon) selecteert en ver
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50181,37 +49866,25 @@ Foutmelding: %2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- GESLAAGD: %n attribuut verwijderd.
- GESLAAGD: %n attributen verwijderd.
-
+ GESLAAGD: %n attribuut verwijderd. GESLAAGD: %n attributen verwijderd.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- FOUT: %n attribuut niet verwijderd.
- FOUT: %n attributen niet verwijderd.
-
+ FOUT: %n attribuut niet verwijderd. FOUT: %n attributen niet verwijderd.
SUCCESS: %n attribute(s) added.
added attributes count
-
- GESLAAGD: %n attribuut toegevoegd.
- GESLAAGD: %n attributen toegevoegd.
-
+ GESLAAGD: %n attribuut toegevoegd. GESLAAGD: %n attributen toegevoegd.
ERROR: %n new attribute(s) not added
not added attributes count
-
- FOUT: %n nieuwe attribuut niet toegevoegd
- FOUT: %n nieuwe attributen niet toegevoegd
-
+ FOUT: %n nieuwe attribuut niet toegevoegd FOUT: %n nieuwe attributen niet toegevoegd
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- GESLAAGD: %n attribuutwaarde aangepast.
- GESLAAGD: %n attribuutwaarden aangepast.
-
+ GESLAAGD: %n attribuutwaarde aangepast. GESLAAGD: %n attribuutwaarden aangepast.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- FOUT: %n attribuutwaarde is niet aangepast.
- FOUT: %n attribuutwaarden zijn niet aangepast.
-
+ FOUT: %n attribuutwaarde is niet aangepast. FOUT: %n attribuutwaarden zijn niet aangepast.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- GESLAAGD: %n object verwijderd.
- GESLAAGD: %n objecten verwijderd.
-
+ GESLAAGD: %n object verwijderd. GESLAAGD: %n objecten verwijderd.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- FOUT: %n object niet verwijderd.
- FOUT: %n objecten niet verwijderd.
-
+ FOUT: %n object niet verwijderd. FOUT: %n objecten niet verwijderd.
SUCCESS: %n feature(s) added.
added features count
-
- GESLAAGD: %n object toegevoegd.
- GESLAAGD: %n objecten toegevoegd.
-
+ GESLAAGD: %n object toegevoegd. GESLAAGD: %n objecten toegevoegd.
ERROR: %n feature(s) not added.
not added features count
-
- FOUT: %n object niet toegevoegd.
- FOUT: %n objecten niet toegevoegd.
-
+ FOUT: %n object niet toegevoegd. FOUT: %n objecten niet toegevoegd.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- FOUT: %n object niet toegevoegd - de provider ondersteund het toevoegen niet.
- FOUT: %n objecten niet toegevoegd - de provider ondersteund het toevoegen niet.
-
+ FOUT: %n object niet toegevoegd - de provider ondersteund het toevoegen niet. FOUT: %n objecten niet toegevoegd - de provider ondersteund het toevoegen niet.
SUCCESS: %n geometries were changed.
changed geometries count
-
- GESLAAGD: %n geometrie is aangepast.
- GESLAAGD: %n geometrieën zijn aangepast.
-
+ GESLAAGD: %n geometrie is aangepast. GESLAAGD: %n geometrieën zijn aangepast.
ERROR: %n geometries not changed.
not changed geometries count
-
- FOUT: %n geometrie is niet aangepast.
- FOUT: %n geometrieën niet aangepast.
-
+ FOUT: %n geometrie is niet aangepast. FOUT: %n geometrieën niet aangepast.
Options (%n coordinate reference systems available)
crs count
-
- Opties (%n ruimtelijke referentie systemen beschikbaar)
- Opties (%n ruimtelijke referentie systemen beschikbaar)
-
+ Opties (%n ruimtelijke referentie systemen beschikbaar) Opties (%n ruimtelijke referentie systemen beschikbaar)
Coordinate Reference System (%n available)
crs count
-
- Ruimtelijke Referentie Systemen (%n beschikbaar)
- Ruimtelijke Referentie Systemen (%n beschikbaar)
-
+ Ruimtelijke Referentie Systemen (%n beschikbaar) Ruimtelijke Referentie Systemen (%n beschikbaar)
%n Layer(s) selected
selected layer count
-
- %n Laag geselecteerd
- %n Lagen geselecteerd
-
+ %n Laag geselecteerd %n Lagen geselecteerd
(and %n more)
crs
-
- (en %n meer)
- (en %n meer)
-
+ (en %n meer) (en %n meer)
%n tile requests in background
tile request count
-
- %n tile-aanvraag op de achtergrond
- %n tile-aanvragen op de achtergrond
-
+ %n tile-aanvraag op de achtergrond %n tile-aanvragen op de achtergrond
, %n cache hits
tile cache hits
-
- , %n cache hit
- , %n cache hits
-
+ , %n cache hit , %n cache hits
, %n cache misses.
tile cache missed
-
- , %n cache misses.
- , %n cache misses.
-
+ , %n cache misses. , %n cache misses.
, %n errors.
errors
-
- , %n fout.
- , %n fouten.
-
+ , %n fout. , %n fouten.
(and %n more)
crs
-
- (en %n meer)
- (en %n meer)
-
+ (en %n meer) (en %n meer)
%n missing row(s)
-
- %n ontbrekende rij(en)
- %n ontbreken rijen
-
+ %n ontbrekende rij(en) %n ontbreken rijen
%n missing column(s)
-
- %n ontbrekende kolom(men)
- %n ontbrekende kolommen
-
+ %n ontbrekende kolom(men) %n ontbrekende kolommen
%n tile requests in background
tile request count
-
- %n tile request op achtergrond
- %n tile requests op achtergrond
-
+ %n tile request op achtergrond %n tile requests op achtergrond
, %n cache hits
tile cache hits
-
- , %n cache hits
- , %n cache hits
-
+ , %n cache hits , %n cache hits
, %n cache misses.
tile cache missed
-
- , %n cache missers.
- , %n cache misses.
-
+ , %n cache missers. , %n cache misses.
, %n errors.
errors
-
- , %n fouten.
- , %n fouten.
-
+ , %n fouten. , %n fouten.
SaDbTableModel
+ Schema
- Schema
+ Schema
+ Table
- Tabel
+ Tabel
+ Type
- Type
+ Type
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Lijn Interpretatie
+ Lijn Interpretatie
+ Geometry column
- Geometriekolom
+ Geometriekolom
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Verbinding opslaan
+ Verbinding opslaan
+ Should the existing connection %1 be overwritten?
- Bestaande verbinding %1 overschrijven?
+ Bestaande verbinding %1 overschrijven?
+ Failed to load interface
- Interface kan niet worden geladen
+ Interface kan niet worden geladen
+ Test connection
- Test verbinding
+ Test verbinding
+ Connection to %1 was successful
- Verbinding met %1 is geslaagd
+ Verbinding met %1 is geslaagd
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Verbinding mislukt - Controleer de instellingen en probeer opnieuw.
+ Verbinding mislukt - Controleer de instellingen en probeer opnieuw.
SQL Anywhere foutinformatie: %1
Omschrijving: %2
@@ -53614,276 +53229,348 @@ Omschrijving: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Nieuwe SQL Anywhere verbinding aanmaken
+ Nieuwe SQL Anywhere verbinding aanmaken
+ Connection Information
- Verbindingsinformatie
+ Verbindingsinformatie
+ Name
- Naam
+ Naam
+ Host
- Host
+ Host
+ Port
- Poort
+ Poort
+ Server
- Server
+ Server
+ Database
- Database
+ Database
+ Connection Parameters
- Verbindingseigenschappen
+ Verbindingseigenschappen
+ Username
- Gebruikersnaam
+ Gebruikersnaam
+ Password
- Wachtwoord
+ Wachtwoord
+ Name of the new connection
- Naam van de nieuwe verbinding
+ Naam van de nieuwe verbinding
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Naam of IP-adres van de computer die de database server draait (leeg laten voor lokale verbindingen)
+ Naam of IP-adres van de computer die de database server draait (leeg laten voor lokale verbindingen)
+ Port number used by the database server (leave blank for default 2638)
- Poortnummer van de database-server (leeg laten voor standaard 2638)
+ Poortnummer van de database-server (leeg laten voor standaard 2638)
+ Name of the database server (leave blank for default server on host)
- Naam van de database-server (leeg laten voor de standaar server op de host)
+ Naam van de database-server (leeg laten voor de standaar server op de host)
+ Name of the database (leave blank for default database on server)
- Naam van de database (leeg laten voor standaard database op server)
+ Naam van de database (leeg laten voor standaard database op server)
+ Additional connection parameters
- Aanvulling op verbindingseigenschappen
+ Aanvulling op verbindingseigenschappen
+ Database username
- Database-gebruiker
+ Database-gebruiker
+ Database password
- Database-wachtwoord
+ Database-wachtwoord
+ Save the connection username in the registry
- Sla de gebruikersnaam van de verbinding op in de 'registry'
+ Sla de gebruikersnaam van de verbinding op in de 'registry'
+ Save Username
- Gebruikersnaam Opslaan
+ Gebruikersnaam Opslaan
+ &Test Connect
- &Test Verbinding
+ &Test Verbinding
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Sla het wachtwoord op in het 'registry' (WAARSCHUWING: ONVEILIG)
+ Sla het wachtwoord op in het 'registry' (WAARSCHUWING: ONVEILIG)
+ Save Password
- Wachtwoord Opslaan
+ Wachtwoord Opslaan
+ Encrypt packets using simple encryption
- Gebruik een eenvoudige versleuteling van de data-pakketten
+ Gebruik een eenvoudige versleuteling van de data-pakketten
+ Simple Encryption
- Eenvoudige Versleuteling
+ Eenvoudige Versleuteling
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Gebruik schattingen voor bepaalde laageigenschappen zoals cardinaliteit, extent etc (verbeterd de snelheid)
+ Gebruik schattingen voor bepaalde laageigenschappen zoals cardinaliteit, extent etc (verbeterd de snelheid)
+ Estimate table metadata
- Tabel metadata schattingen
+ Tabel metadata schattingen
+ Search for geometry columns in tables owned by other users
- Zoek naar geometriekolommen in tabellen van andere gebruikers
+ Zoek naar geometriekolommen in tabellen van andere gebruikers
+ Search other users' tables
- Doorzoek tabellen van andere gebruikers
+ Doorzoek tabellen van andere gebruikers
SaSourceSelect
+ &Add
- &Toevoegen
+ &Toevoegen
+ &Set Filter
- Filter In&stellen
+ Filter In&stellen
+ Wildcard
- Wildcard
+ Wildcard
+ RegExp
- RegExp
+ RegExp
+ All
- Alles
+ Alles
+ Schema
- Schema
+ Schema
+ Table
- Tabel
+ Tabel
+ Type
- Type
+ Type
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Lijn Interpretatie
+ Lijn Interpretatie
+ Geometry column
- Geometriekolom
+ Geometriekolom
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Weet u zeker dat u de %1 verbinding wilt verwijderen inclusief alle eraan verbonden instellingen?
+ Weet u zeker dat u de %1 verbinding wilt verwijderen inclusief alle eraan verbonden instellingen?
+ Confirm Delete
- Verwijderen Bevestigen
+ Verwijderen Bevestigen
+ Select Table
- Selecteer Tabel
+ Selecteer Tabel
+ You must select a table in order to add a layer.
- Selecteer een tabel om een laag toe te kunnen voegen.
+ Selecteer een tabel om een laag toe te kunnen voegen.
+ Failed to load interface
- Interface kan niet worden geladen
+ Interface kan niet worden geladen
+ Connection failed
- Verbinding mislukt
+ Verbinding mislukt
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Verbinding met database %1 mislukt. Controleer de instellingen en probeer opnieuw.
+ Verbinding met database %1 mislukt. Controleer de instellingen en probeer opnieuw.
SQL Anywhere fouinformatie: %2
Omschrijving: %3
+ No accessible tables found
- Geen toegankelijke tabellen gevonden
+ Geen toegankelijke tabellen gevonden
+ Database connection was successful, but no tables containing geometry columns were %1.
- Databaseverbinding is gelukt, maar er zijn geen voor tabellen gevonden die een geometrie bevat met '%1'.
+ Databaseverbinding is gelukt, maar er zijn geen voor tabellen gevonden die een geometrie bevat met '%1'.
+ found
- gevonden
+ gevonden
+ found in your schema
- gevonden in uw schema
+ gevonden in uw schema
SaSourceSelectBase
+ Add SQL Anywhere layer
- SQL Anywhere Laag toevoegen
+ SQL Anywhere Laag toevoegen
+ SQL Anywhere Connections
- SQL Anywhere Verbindingen
+ SQL Anywhere Verbindingen
+ Delete
- Verwijderen
+ Verwijderen
+ Edit
- Bewerken
+ Bewerken
+ New
- Nieuw
+ Nieuw
+ Connect
- Verbinden
+ Verbinden
+ Search options
- Zoek opties
+ Zoek opties
+ Search
- Zoek
+ Zoek
+ Search mode
- Zoek modus
+ Zoek modus
+ Search in columns
- Zoeken in kolommen
+ Zoeken in kolommen
SaveAsPythonScriptAction
I/O error
- I/O fout
+ I/O fout
Unable to save edits. Reason:
%s
- Kan wijzigingen niet opslaan. Reden:
+ Kan wijzigingen niet opslaan. Reden:
%s
@@ -54218,20 +53905,24 @@ Omschrijving: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- SQL Anywhere-laag toevoegen...
+ SQL Anywhere-laag toevoegen...
+ Store vector layers within a SQL Anywhere database
- Vectorlagen opslaan in een SQL Anywhere database
+ Vectorlagen opslaan in een SQL Anywhere database
+ Invalid Layer
- Ongeldige Laag
+ Ongeldige Laag
+ %1 is an invalid layer and cannot be loaded.
- %1 is een ongeldige laag en kan niet worden geladen.
+ %1 is een ongeldige laag en kan niet worden geladen.
@@ -55569,7 +55260,7 @@ Doe nogmaals de topologie check.
context_help
- <h3>Database connection</h3>
<h3>Database connectie</h3>
@@ -55781,7 +55472,7 @@ which are described and illustrated on <a href="http://en.wikipedia.org/
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55791,7 +55482,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55841,7 +55532,7 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
<h3>Aangepast Ruimtelijk Referentie Systeem (CRS) Definitie</h3>
Als het gewenste coördinaatsysteem niet aanwezig is kunt u zelf een aangepast CRS definiëren. <p>
@@ -55873,7 +55564,7 @@ Om een aangepast CRS in QGIS te definiëren is kennis van de Proj.4 projectie bi
<table>
<tr>
<td>
- <p align='justify'>
+ <p align='justify'>
The QGIS Python Console is an interactive shell for the python command executions.
It also has a python file editor that allows you to edit and save your python scripts.
Both console and editor are based on PyQScintilla2 package.<br>
@@ -55929,7 +55620,7 @@ Om een aangepast CRS in QGIS te definiëren is kennis van de Proj.4 projectie bi
</tr>
</table>
<b><i>Toolbar:</i></b>
- <table width="100%" id='toolbarConsole'>
+ <table width="100%" id='toolbarConsole'>
<tr>
<td><img src="qrc:/images/themes/default/console/iconClearConsole.png" /></td>
<td colspan="2">Clear python console</td>
@@ -56024,8 +55715,8 @@ that will be automatically deleted after running.</li>
<br>
<li><label>Using prepared APIs file:</label> If checked the *.pap file will be used for code completion. To generate a prepared APIs file you have to load least an *.api file and then compile it by clicking on <label>Compile Apis...</label> button.</li>
</ul>
-<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
- <b>Note:</b> To save the state of console's widgets you have to close the Python Console
+<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
+ <b>Note:</b> To save the state of console's widgets you have to close the Python Console
from the close button. This allows you to save the geometry to be restored to the next start.
</p>
@@ -56221,7 +55912,7 @@ This dialog allows you to define the settings for a connection to a Oracle datab
<li> <label>Only look in meta data table</label> Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.
-<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
+<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56236,7 +55927,7 @@ the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied. The table
geometry is determined from the first 100 non-null geometry rows in the table.
<li> <label>Only existing geometry types</label> Only list the existing
-geometry types and don't offer to add others.
+geometry types and don't offer to add others.
</ul>
@@ -56408,10 +56099,10 @@ The field calculator allows you to update fields with expressions.
</td>
<td>value of field <tt>column_name</tt></td>
</tr>
-<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
+<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
<tr><td><tt>number</tt></td><td>number</td></tr>
<tr><td>NULL</td><td>null value</td></tr>
-<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
+<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
<tr><td>ln(<tt>a</tt>)</td><td>natural log (i.e. base e) of <tt>a</tt></td></tr>
<tr><td>log10(<tt>a</tt>)</td><td>log base 10 of <tt>a</tt></td></tr>
<tr><td>log(<tt>a</tt>,<tt>b</tt>)</td><td>log base <tt>b</tt> of <tt>a</tt></td></tr>
@@ -56538,8 +56229,8 @@ Draws a scale bar on the map.
<p>
You can control the style and placement, as well as the labeling of the bar.
QGIS only supports displaying the scale in the same units as your map frame. So
-if the units of your layers are in meters, you can't create a scale bar in
-feet. Likewise if you are using decimal degrees, you can't create a scale bar
+if the units of your layers are in meters, you can't create a scale bar in
+feet. Likewise if you are using decimal degrees, you can't create a scale bar
to display distance in meters.</p> <p>
To add a scale bar:
<ol>
@@ -56596,7 +56287,7 @@ This dialog allows you to define the settings for a connection to a PostgreSQL d
<li> <label>Only look in the geometry_columns table</label> Indicates that only "listed" geometry columns should be used - opposed to scanning all tables for geometry columns.
-<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
+<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56853,8 +56544,8 @@ To avoid digitizing all vertices of the common boundary select <label>Avoi
<a name="crs">
<h4>Coordinate Reference System (CRS) Tab</h4>
</a>
-The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
-<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
+The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
+<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
<p>You can find a coordinate system by entering its name, EPSG code or the QGIS ID and clicking the <label>Find</label> button.
<p>The list of recently used coordinate systems will be available on the bottom for quick access.
@@ -57294,7 +56985,7 @@ Om het gebied van een Favoriete Plaats bij te werken, druk op de knop <label&
<p><label>Topology tolerance</label> - the distance in units of the project. If the distance of two points falls short the topological tolerance, they are considered to be the vertex. A topological tolerance value greater than zero slows down the plugin, but you can use not ideal data sources.</p>
<h5>Note</h5>
-<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
+<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
<a name="LayerSettings">
<h4>Transport layer settings</h4>
@@ -57433,6 +57124,7 @@ Deze worden over het algemeen veel sneller geëvalueerd dan de algemene uitdrukk
+ <h3>Create a New SQL Anywhere Connection</h3>
This dialog allows you to define the settings for a connection to a
SQL Anywhere database.
@@ -57461,11 +57153,11 @@ SQL Anywhere database.
<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
-<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
</ul>
- <h3>Maak een nieuwe SQL Anywhere verbinding</h3>
+ <h3>Maak een nieuwe SQL Anywhere verbinding</h3>
In dit dialoogvenster kun je de instellingen definiëren voor de verbinding met een
SQL Anywhere database.
<p>
@@ -57505,7 +57197,7 @@ bepalen. Indien deze optie is aangevinkt wordt alleen een klein gedeelte van de
The open vector layer dialog is used to add vector data to the QGIS map view. Vector data are spatial data described using geometries of points, lines and polygons (enclosed areas).</p>
QGIS supports vector data in a number of formats, including those supported by the OGR library data provider plugin, such as ESRI shape files, MapInfo MIF (interchange format) and MapInfo TAB (native format).</p>
QGIS supports PostGIS layers in a PostgreSQL database and SpatiaLite layers. Support for additional data types (eg. delimited text) is provided by additional data provider plugins. A list of OGR supported vector formats can be found in Appendix A.1 of the User Guide.</p>
-Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
+Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
<h3>Vectorlaag Toevoegen</h3>
<p>Het dialoogscherm voor Vectorlaag Toevoegen wordt gebruikt om vector kaartlagen aan de kaart toe te voegen. Vectoren zijn ruimtelijke objecten die worden beschreven als punten, lijnen en vlakken (polygonen).</p>
@@ -57593,10 +57285,10 @@ It is possible to check how often QGIS will download the list and update informa
from the available repositories.
</p>
<p>
-By checking the 'Show experimental plugins' checkbox, all plugins will be shown
-in the lists, even the ones that are considered 'experimental' by the author.
+By checking the 'Show experimental plugins' checkbox, all plugins will be shown
+in the lists, even the ones that are considered 'experimental' by the author.
-<table border=1 width='95%' align='center'><tr><td>
+<table border=1 width='95%' align='center'><tr><td>
Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
</td></tr></table>
@@ -57747,7 +57439,7 @@ Define placement algorithm for labels. Choose between <label>central point
In the <label>Digitizing</label> tab you can define settings for digitizing line width and color.
<h5>Snapping</h5>
Here you can define a general, project wide snapping tolerance. <p>
-You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
+You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
A layer based snapping tolerance can be defined by choosing <label>Settings</label> (or <label>File</label>) > <label>Project Properties...</label>. In the <label>General</label> tab, section <label>Digitize</label> you can click on <label>Snapping options...</label> to enable and adjust snapping mode and tolerance on a layer basis.
<h5>Vertex markers</h5>
You can define marker style as <label>Semi transparent circle</label>, <label>Cross</label> or <label>None</label> and size; you can also set showing markers only for selected features.
@@ -57870,6 +57562,7 @@ Je kan ook breedte en precisie van het nieuwe attribuutveld meegeven.
In de Attributenlijst kun je de toe te voegen attribuutvelden zien. Om een attribuutveld te verwijderen uit de lijst, klik erop en kies <label>Attribuut verwijderen</label>.
+ <h3>Add SQL Anywhere Tables</h3>
This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
<p>
@@ -57908,7 +57601,7 @@ To filter a layer before adding it to the map, either double click on its name o
</a>
Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
- <h3>SQL Anywhere-tabellen toevoegen</h3>
+ <h3>SQL Anywhere-tabellen toevoegen</h3>
Dit dialoogvenster stelt u in staat SQL Anywhere-lagen (tabellen met een kolom geometrie) toe te voegen an het kaartvenster van QGIS.
<p>
<a href="#connect">Verbindingen</a><br/>
@@ -58087,7 +57780,7 @@ It is safer to use an explicit coding if the QGIS project needs to be portable.
or degrees/minutes. QGIS is quite permissive in its interpretation of degrees/minutes/seconds.
A valid DMS coordinate will contain three numeric fields with an optional hemisphere prefix or suffix
(N, E, or + are positive, S, W, or - are negative). Additional non numeric characters are
- generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
+ generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
</li>
</ul>
<p>For well known text geometry the following options apply:</p>
@@ -58137,8 +57830,8 @@ are escaped.</p>
(that is, to stop it being treated as a new line, delimiter, or quote character).
</p>
<p>Escape characters that are also quote characters have much more limited effect. They only apply within quotes and only escape themselves. For example, if
-<tt>'</tt> is a quote and escape character, then the string
-<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
+<tt>'</tt> is a quote and escape character, then the string
+<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
</p>
@@ -58925,7 +58618,7 @@ Voor ondersteuning stuur email naar scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">p, li { white-space: pre-wrap; }</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Verbindingsstatus: </span></p></body></html>
@@ -59690,7 +59383,7 @@ Plugin wordt niet geladen.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -59706,9 +59399,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
<h3>week() function</h3>
@@ -59733,7 +59426,7 @@ uit een <code>Interval</code>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -59758,7 +59451,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
@@ -59794,7 +59487,7 @@ die een resultaat geeft.
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -59808,7 +59501,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
<h3>right() functie</h3>
@@ -59829,7 +59522,7 @@ Geeft een substring die het <i>n</i> meest rechtse teken van de teke
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -59840,7 +59533,7 @@ Deze groep bevat functies om kleuren te manipuleren
- <h3>length() function</h3>
Returns the length of a string.
@@ -59853,7 +59546,7 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
<h3>length() functie</h3>
Geeft de lengte van een string.
@@ -59871,7 +59564,7 @@ Geeft de lengte van een string.
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -59884,7 +59577,7 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
<h3>upper() functie</h3>
Converteert een tekenreeks naar hoofdletters.
@@ -59902,9 +59595,9 @@ Converteert een tekenreeks naar hoofdletters.
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -59914,8 +59607,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
<h3>de functie bbox</h3>
Retourneert 1 wanneer de bounding box, de minimale rechthoek waarbinnen een geometrie past, deels over elkaar heenliggen en 0 wanneer niet.
@@ -59933,7 +59626,7 @@ b → geometrie
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -59947,7 +59640,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
<h3>left() functie</h3>
@@ -59968,7 +59661,7 @@ Geeft een subtekenreeks die de <i>n</i> meest linkse tekens van de t
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -59997,7 +59690,7 @@ NB: Deze functie is alleen beschikbaar in sommige contexten en zal anders 0 zijn
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -60030,9 +59723,9 @@ Rond een getal naar boven af.
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -60043,7 +59736,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
<h3>de functie toreal</h3>
Zet een tekststring om naar een reëel getal. Er veranderd niets wanneer een waarde niet omgezet kan worden naar een reël getal (bijv. '123.56asd' is ongeldig). Getallen worden afgerond na het opslaan van de wijzigingen wanneer de precisie kleiner is dan het resultaat van de conversie.
@@ -60061,7 +59754,7 @@ Zet een tekststring om naar een reëel getal. Er veranderd niets wanneer een waa
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -60088,7 +59781,7 @@ Geeft de x-coördinaat van een punt van de huidige geometrie terug
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -60117,14 +59810,14 @@ Geen
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -60133,8 +59826,8 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
<h3>de functie strpos()</h3>
Geeft de index van een reguliere expressie van een tekst terug.
@@ -60156,7 +59849,7 @@ Retourneert -1 wanneer de expressie niet is gevonden.
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -60193,7 +59886,7 @@ Deze functie heeft twee argumenten.
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -60227,7 +59920,7 @@ Geen
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -60260,7 +59953,7 @@ Geen
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60289,7 +59982,7 @@ geom → a geometrie
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -60322,7 +60015,7 @@ Rondt een getal naar beneden af.
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60351,9 +60044,9 @@ geom → een geometrie
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -60364,7 +60057,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
<h3>de functie toint()</h3>
Converteert tekst naar een integer (geheel getal). Zet deze tekst niet om wanneer de waarde niet kan worden omgezet naar een integer ('123asd' is bijv. ongeldig).
@@ -60382,7 +60075,7 @@ Converteert tekst naar een integer (geheel getal). Zet deze tekst niet om wannee
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -60409,7 +60102,7 @@ Geeft de y-coördinaat van een punt van de huidige geometrie terug
- <h3>tostring() function</h3>
Converts a number to string.
@@ -60422,7 +60115,7 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
<h3>de functie tostring()</h3>
Converteert een getal naar tekst.
@@ -60440,7 +60133,7 @@ Converteert een getal naar tekst.
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -60469,7 +60162,7 @@ Geen
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -60504,7 +60197,7 @@ argumenten worden gebruikt om het quadrant van het resultaat te bepalen
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -60533,7 +60226,7 @@ Geeft de sinus van een hoek.
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -60549,9 +60242,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
<h3>month() functie</h3>
@@ -60605,7 +60298,7 @@ Geen
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -60621,9 +60314,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
<h3>day() functie</h3>
@@ -60648,12 +60341,12 @@ uit een <code>Interval</code>
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -60677,7 +60370,7 @@ Converteert een tekenreeks naar een Qt datatype.
<code>todate('2012-05-04') → 2012-05-04</code><br>
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60694,7 +60387,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
<h3>lpad() functie</h3>
Zet een string om naar een nieuwe string van de gevraagde lengte, opgevuld met een meegegeven teken.
@@ -60715,7 +60408,7 @@ Zet een string om naar een nieuwe string van de gevraagde lengte, opgevuld met e
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -60744,14 +60437,14 @@ Geeft de arcuscosinus van een waarde in radialen.
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60766,7 +60459,7 @@ Het laden van veldwaarden van WFS lagen wordt niet ondersteund, voordat de kaart
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -60803,7 +60496,7 @@ Deze functie heeft twee argumenten.
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -60812,14 +60505,14 @@ Deze groep bevat functies voor geometrie-objecten zoals lengten, oppervlakken.
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60834,7 +60527,7 @@ Het laden van veldwaarden van WFS lagen wordt niet ondersteund, voordat de kaart
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -60863,7 +60556,7 @@ Geen
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -60891,7 +60584,7 @@ Geeft de exponent van een waarde
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60908,7 +60601,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
<h3>rpad() functie</h3>
@@ -60929,7 +60622,7 @@ Zet een string om naar een nieuwe string van de gevraagde lengte, opgevuld met e
<code>rpad('Hallo', 10, 'x') → 'xxxxxHallo'</code><br>
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -60974,7 +60667,7 @@ gebruik <code>round(decimal)</code> om af te ronden tot de dichts na
- <h3>$now function</h3>
Returns the current date and time
@@ -61003,7 +60696,7 @@ Geen
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -61018,7 +60711,7 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
<h3>de functie color_hsl()</h3>
Geeft een tekstwaarde van een kleur terug gebaseerd op de attributen tint, saturatie en helderheid
@@ -61038,7 +60731,7 @@ Geeft een tekstwaarde van een kleur terug gebaseerd op de attributen tint, satur
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -61051,8 +60744,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -61098,7 +60791,7 @@ accelererend als de invoerwaarden het maximum van het domein naderen. Kleinere e
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -61110,7 +60803,7 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
<h3>de functie convexHull</h3>
Geeft de convexe omhulling terug van een geometrie. Het vertegenwoordigt de minimale convex geometrie die alle geometrieën binnen de verzameling omhult.
@@ -61127,7 +60820,7 @@ b → geometrie
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -61139,7 +60832,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
<h3>de functie union</h3>
Geeft een geometrie terug die de samengevoegde puntenverzameling van de geometrieën vertegenwoordigt.
@@ -61156,7 +60849,7 @@ b → geometrie
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61185,7 +60878,7 @@ geom → een geometrie
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61214,7 +60907,7 @@ geom → een geometrie
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61244,7 +60937,7 @@ geom → een geometrie
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -61256,8 +60949,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>de functie contains</h3>
Geeft true terug als en alleen als er geen punten van b buiten a liggen en ten minste één punt binnen b ook binnen a ligt.
@@ -61275,7 +60968,7 @@ geometry → geometrie
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -61290,8 +60983,8 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
<h3>de functie wordwrap()</h3>
Geeft een tekenreeks terug die is afgebroken tot een maximum/minimum aantal tekens.
@@ -61312,7 +61005,7 @@ Geeft een tekenreeks terug die is afgebroken tot een maximum/minimum aantal teke
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -61328,7 +61021,7 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
<h3>de functie color_rgb()</h3>
@@ -61349,7 +61042,7 @@ Geeft een tekenreeks terug die een kleur weergeeft, gebaseerd op zijn componente
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -61366,7 +61059,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
<h3>color_cmyk() functie</h3>
@@ -61387,7 +61080,7 @@ Geeft een tekstwaarde terug die een kleur weergeeft, gebaseerd op de componenten
color_cmyk(100,50,0,10) → '#0073e6'</p>
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -61399,7 +61092,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
<h3>de functie intersection</h3>
Geeft een geometrie terug die het gedeelde deel van geometrie a en geometrie b vertegenwoordigt.
@@ -61416,7 +61109,7 @@ geometry → geometrie
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -61426,12 +61119,12 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
@@ -61460,7 +61153,7 @@ De beschikbare kleurverlopen variëren tussen installaties van QGIS. Deze funct
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -61471,8 +61164,8 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
@@ -61499,7 +61192,7 @@ Geen
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -61514,7 +61207,7 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
<h3>de functie color_hsv()</h3>
Geeft een tekstwaarde terug die een kleur weergeeft, gebaseerd op de attributen tint, saturatie en waarde
@@ -61533,7 +61226,7 @@ Geeft een tekstwaarde terug die een kleur weergeeft, gebaseerd op de attributen
color_hsv(40,100,100) → '#ffaa00'</p>
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -61544,9 +61237,9 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
<h3>expressie ILIKE</h3>
Geeft 1 terug als de eerste parameter overeenkomt, niet hoofdlettergevoelig, met het opgegeven patroon. LIKE mag in plaats van ILIKE wordne gebruikt om de overeenkomst hoofdlettergevoelig te maken. Werkt ook met getallen.
@@ -61564,7 +61257,7 @@ Geen
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -61575,9 +61268,9 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
<h3>expressie LIKE</h3>
Geeft 1 terug als de eerste parameter overeenkomst met het opgegeven patroon. Werkt ook met getallen.
@@ -61595,7 +61288,7 @@ Geen
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61625,7 +61318,7 @@ geom → een geometrie
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -61636,7 +61329,7 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
<h3>de functie geomFromGML</h3>
@@ -61654,7 +61347,7 @@ tekst → GML-weergave van een geometrie
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -61663,7 +61356,7 @@ Deze groep bevat functies voor gebruik van datum en tijddata.
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -61675,8 +61368,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
<h3>de functie combine</h3>
geeft de combinatie terug van geometrie a en geometrie b.
@@ -61694,9 +61387,9 @@ geometry → geometrie
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -61706,8 +61399,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>de functie intersects</h3>
Geeft 1 terug als de geometrieën elkaar ruimtelijk overlappen (enig deel van een ruimte delen) en 0 als dat niet zo is.
@@ -61725,7 +61418,7 @@ b → geometrie
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -61768,7 +61461,7 @@ Beperkt een inputwaarde tot een specifiek bereik.
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -61780,8 +61473,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
<h3>de functie disjoint</h3>
Retourneert 1 wanneer geometrieën geen "spatiale relatie" met elkaar hebben - ze delen nergens een ruimte met elkaar, ze staan los van elkaar.
@@ -61799,7 +61492,7 @@ b → geometrie
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -61810,7 +61503,7 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
<h3>de functie geomFromWKT</h3>
@@ -61828,7 +61521,7 @@ tekst → weergave van een geometrie in Well-Known Text (WKT)
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -61859,43 +61552,7 @@ b → bufferafstand
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -61924,10 +61581,10 @@ Geen
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -61954,25 +61611,7 @@ Geen
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -61984,8 +61623,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>de functie crosses</h3>
Retourneert 1 wanneer de gegeven geometrieën enkele, maar niet alle, overeenkomstige interne punten hebben.
@@ -62003,7 +61642,7 @@ geometry → geometrie
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -62030,7 +61669,7 @@ a → geometrie
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -62042,8 +61681,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>de functie touches</h3>
Retourneert 1 wanneer de geometrieën minstens één gemeenschappelijk punt hebben maar waarbij hun binnenkant elkaar niet overlapt.
@@ -62061,7 +61700,7 @@ b → geometrie
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -62073,8 +61712,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>de functie overlaps</h3>
Retourneert 1 wanneer twee geometrieën van hetzelfde type zijn, voor een deel elkaar overlappen, maar niet geheel binnen de ander valt.
@@ -62091,7 +61730,7 @@ b → geometrie
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -62122,7 +61761,7 @@ Geen
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -62151,7 +61790,7 @@ Geen
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -62182,7 +61821,7 @@ Geen
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -62211,7 +61850,7 @@ b → geometrie
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -62223,8 +61862,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
<h3>de functie within</h3>
Geeft 1 terug wanneer geometrie a volledig binnen geometrie b ligt
@@ -62242,7 +61881,7 @@ geometrie → geometrie
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -62278,7 +61917,7 @@ $map → "canvas" (binnen het hoofdvenster van QGIS)</pre>
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -62290,7 +61929,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
<h3>de functie distance</h3>
Geeft de minimale afstand terug (gebaseerd op ruimtelijke verwijzing) tussen twee geometrieën in geprojecteerde eenheden.
@@ -62307,7 +61946,7 @@ b → geometrie
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -62319,7 +61958,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
<h3>de functie difference</h3>
Geeft een geometrie terug die dat gedeelte van geometrie a vertegenwoordigt dat niet kruist met geometrie b.
@@ -62336,7 +61975,7 @@ geometry → geometrie
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -62347,8 +61986,8 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
@@ -62369,7 +62008,7 @@ Geen
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -62381,7 +62020,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
<h3>de functie symDifference</h3>
geeft een geometrie terug die de gedeelten van a en b vertegenwoordigen die elkaar niet overlappen.
@@ -62398,7 +62037,7 @@ geometry → geometrie
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -62427,12 +62066,12 @@ Geen
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -62456,7 +62095,7 @@ Converteert en tekenreeks naar een type interval. Kan worden gebruikt om dagen,
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -62472,10 +62111,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
<h3>hour() functie</h3>
@@ -62500,7 +62139,7 @@ Geeft het uur uit een datumtijd of tijd terug, of het aantal uren uit een <co
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -62516,7 +62155,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
<h3>de functie color_hsla()</h3>
Geeft een weergave in een tekenreeks terug van een kleur, gebaseerd op zijn attributen tint, saturatie, helderheid en alfa (transparantie)
@@ -62537,7 +62176,7 @@ Geeft een weergave in een tekenreeks terug van een kleur, gebaseerd op zijn attr
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -62563,7 +62202,7 @@ Geen
<pre>$pi → 3.14159265358979</pre>
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
@@ -62571,12 +62210,12 @@ This group contains functions that operate on record identifiers.
Deze groep bevat functies met betrekking tot rijnummers.
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -62600,7 +62239,7 @@ Converteert een tekenreeks naar Qt time-indeling.
<code>totime('12:30:01') → 12:30:01</code><br>
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -62615,7 +62254,7 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
<h3>replace() functie</h3>
Geeft een tekst terug waarvan een deel is vervangen.
@@ -62635,7 +62274,7 @@ Geeft een tekst terug waarvan een deel is vervangen.
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
@@ -62643,7 +62282,7 @@ This group contains functions to handle conditional checks in expressions.
Deze groep bevat functies om conditionele voorwaarden in expressies in te bouwen.
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -62671,7 +62310,7 @@ abs(<i>waarde</i>)<br>
<code>abs(-2) → 2</code><br>
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -62702,7 +62341,7 @@ Geeft de maximum waarde van een set.
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -62730,7 +62369,7 @@ Geeft de vierkantswortel van een waarde
sqrt(9) → 3</p>
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
@@ -62739,7 +62378,7 @@ Deze groep bevat functies die werken met voorwaardelijke condities.
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -62757,7 +62396,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
<h3>color_cmyka() functie</h3>
@@ -62780,7 +62419,7 @@ Geeft een tekstwaarde van een kleur, gebaseerd op de cyaan, magenta, geel, zwart
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -62816,7 +62455,7 @@ De functie rondt het getal ook af op het opgegeven aantal decimalen.
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -62832,9 +62471,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
<h3>year() functie</h3>
@@ -62856,7 +62495,7 @@ Geeft het jaar uit een datum terug, of het aantal jaren uit een <code>Inte
<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -62881,7 +62520,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
@@ -62914,7 +62553,7 @@ Componten tussen [ ] zijn optioneel
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -62949,7 +62588,7 @@ De functie heeft twee argumenten.
<code>randf(1, 10) → 4.59258286403147</code><br>
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -62978,7 +62617,7 @@ geom → een geometrie
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -63021,7 +62660,7 @@ scale_linear(<i>val</i>,<i>domain_min</i>,<i>domai
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -63034,7 +62673,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
<h3>trim() functie</h3>
Verwijdert alle spaties en tabs aan het begin en aan het eind van een tekst
@@ -63051,7 +62690,7 @@ Verwijdert alle spaties en tabs aan het begin en aan het eind van een tekst
trim(' hallo wereld ') → 'hallo wereld'</p>
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -63067,10 +62706,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
<h3>minute() functie</h3>
@@ -63093,7 +62732,7 @@ Geeft de minuut uit een datumtijd of tijd terug, of het aantal minuten uit een &
<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -63122,9 +62761,9 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
<h3>age() functie</h3>
@@ -63159,7 +62798,7 @@ gebruik <code>day</code> om het aantal dagen terug te krijgen<br&
<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -63195,7 +62834,7 @@ Deze functie heeft één argument.
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
@@ -63203,7 +62842,7 @@ This group contains functions to convert on data type to another e.g string to i
Deze groep bevat functies om gegevens te converteren naar een ander type, bijvoorbeeld tekst naar getallen, of getallen naar tekst.
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -63232,7 +62871,7 @@ Geeft de cosinus van een hoek terug.
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -63241,7 +62880,7 @@ Deze groep bevat operatoren, bijvoorbeeld +, - en *
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -63257,10 +62896,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
<h3>second() functie</h3>
@@ -63284,7 +62923,7 @@ Geeft de seconde uit een datumtijd of tijd terug, of het aantal seconden uit een
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -63313,7 +62952,7 @@ Geeft de arctangens van een waarde in radialen.
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -63340,7 +62979,7 @@ Geen
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -63354,7 +62993,7 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
<h3>title() functie</h3>
Zet een tekst om naar titelformaat (alle woorden in kleine letters, met hoofdletter als eerste letter).
@@ -63372,7 +63011,7 @@ Zet een tekst om naar titelformaat (alle woorden in kleine letters, met hoofdlet
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -63386,7 +63025,7 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
<h3>de functie regexp_match()</h3>
Geeft true terug als enig deel van een tekenreeks overeenkomt met de opgegeven reguliere expressie.
@@ -63405,7 +63044,7 @@ Geeft true terug als enig deel van een tekenreeks overeenkomt met de opgegeven r
- <h3>substr() function</h3>
Return a part of a string
@@ -63420,7 +63059,7 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
<h3>substr() functie</h3>
Geeft een deel van een tekst terug
@@ -63440,12 +63079,12 @@ Geeft een deel van een tekst terug
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -63471,7 +63110,7 @@ Formatteert een tekst met opgegeven argumenten.
<code>format('Dit %1 een %2','is', 'test') → Dit is een test</code><br>
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -63486,7 +63125,7 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
<h3>de functie regexp_replace()</h3>
Geeft een tekenreeks terug waarin de opgegeven reguliere expressie is vervangen.
@@ -63506,7 +63145,7 @@ Geeft een tekenreeks terug waarin de opgegeven reguliere expressie is vervangen.
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -63520,7 +63159,7 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
<h3>de functie regexp_substr()</h3>
geeft het gedeelte van een tekenreeks terug dat overeenkomt met de opgegeven reguliere expressie.
@@ -63539,7 +63178,7 @@ geeft het gedeelte van een tekenreeks terug dat overeenkomt met de opgegeven reg
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -63568,7 +63207,7 @@ None
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -63585,7 +63224,7 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
<h3>color_rgba() functie</h3>
Geeft een tekstwaarde van een kleur, gebaseerd op de rood, groen, blauw en alpha (transparantie) componenten
@@ -63606,7 +63245,7 @@ Geeft een tekstwaarde van een kleur, gebaseerd op de rood, groen, blauw en alpha
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -63635,7 +63274,7 @@ Geen
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
@@ -63643,7 +63282,7 @@ This group contains math functions e.g square root, sin and cos
Deze groep bevat wiskundige functies zoals wortel, sinus en cosinus
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -63674,7 +63313,7 @@ Geeft de minimum waarde van een set.
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -63685,7 +63324,7 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
<h3>lower() functie</h3>
Converteert een tekst naar kleine letters.
@@ -63700,7 +63339,7 @@ Converteert een tekst naar kleine letters.
lower('HALLIE Hallo') → 'hallie hallo'</p>
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -63729,7 +63368,7 @@ Geen
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
@@ -63737,7 +63376,7 @@ This group contains functions that operate on strings e.g replace, convert to up
Deze groep bevat functies voor het bewerken van tekst, bijvoorbeeld 'zoek en vervang' en omzetten naar hoofdletters.
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -63750,7 +63389,7 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
<h3>concat() functie</h3>
Voegt meerdere tekst-strings samen.
@@ -63768,7 +63407,7 @@ Voegt meerdere tekst-strings samen.
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -63785,8 +63424,8 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
<h3>coalesce() functie</h3>
@@ -63810,7 +63449,7 @@ Deze functie kan meerdere argumenten meekrijgen.
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -63839,12 +63478,12 @@ Geeft de arcsinus van een waarde in radialen.
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -63868,12 +63507,12 @@ Converteert een tekst naar Qt data time type.
<code>todatetime('2014-02-14 12:50:00') → 2014-02-14T12:50:00</code><br>
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -63904,14 +63543,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -63930,14 +63569,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -64042,7 +63681,7 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
<h3>format_date() functie</h3>
@@ -64222,7 +63861,7 @@ Formatteert een datum gegevenstype of string naar een bepaald formaat. Gebruikt
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -64251,7 +63890,7 @@ Geeft de tangens van een hoek terug.
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -64280,7 +63919,7 @@ Geen
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -64316,7 +63955,7 @@ Deze functie heeft één argument.
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -64332,7 +63971,7 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
<h3>de functie color_hsva()</h3>
Geeft een weergave in een tekenreeks terug van een kleur, gebaseerd op zijn attributen tint, saturatie, waarde en alfa (transparantie)
@@ -66907,4 +66546,4 @@ Geeft een weergave in een tekenreeks terug van een kleur, gebaseerd op zijn attr
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_pt_BR.ts b/i18n/qgis_pt_BR.ts
index 6e9bfe1f865..6c48cf1a168 100644
--- a/i18n/qgis_pt_BR.ts
+++ b/i18n/qgis_pt_BR.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,7 +205,7 @@
Biblioteca:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> tabela geometry_columns não existe!
Esta tabela é essencial para muitas aplicações SIG para enumeração de tabelas.
@@ -417,13 +415,13 @@ Esta tabela é essencial para muitas aplicações SIG para enumeração de tabel
Scripts:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> A versão de scripts instalada não corresponde a a versão de scripts lançada!
Isto é provavelmente um resultado de atualização PostGIS incorreta.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Este usuário não possui privilégios para ler conteúdos geometry_columns da tabela!
Esta tabela é essencial para muitas aplicações SIG para enumeração de tabelas.
@@ -2096,7 +2094,7 @@ Isto pode causar resultados inesperados.
campo de comprimento
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Impossível excluir o aquivo shape
%s
@@ -2403,47 +2401,24 @@ Are you sure you want to proceed?
Remover da seleção atual
- Select by location
Selecionar pela localização
- Select features in:
Selecionar feições em:
- that intersect features in:
que cruzem feições em:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Modifica seleção atual por:
+ Modifica seleção atual por:
Use selected features only
- Usar apenas feições selecionadas
+ Usar apenas feições selecionadas
Please specify select layer
@@ -3405,7 +3380,7 @@ Complemento não será habilitado.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4722,7 +4697,7 @@ quando pressionar a ferramenta de diálogo do botão de ajuda.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Para expor um registro com 1 banda com a tabela de cor como um registro com 3 (RGB) ou 4 (RGBA) bandas.
Úteis para drivers de saída, como JPEG, JPEG2000, MrSID, ECW que não suportam cores de registros indexados.
@@ -5521,7 +5496,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&Editar
@@ -5541,157 +5516,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Selecionar
- Measure
Medir
- &Decorations
&Decorações
- &Layer
&Camada
- New
Nova
- &Plugins
&Complementos
- &Help
&Ajuda
- &Settings
&Configurações
- &Raster
&Raster
- Vect&or
Vet&or
- &OpenStreetMap
&OpenStreetMap
- File
Arquivo
- Manage Layers
Gerenciar Camadas
- Digitizing
Digitalizar
- Advanced Digitizing
Digitalização Avançada
- Map Navigation
Navegar no mapa
- Attributes
Atributos
- Plugins
Complementos
- Help
Ajuda
- Raster
Raster
- Label
Rótulo
- Vector
Vetor
- Database
Base de Dados
- Web
Internet
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Salvar a tela como imagem...
- &New Print Composer
&Novo compositor de impressão
- Ctrl+P
Ctrl+P
- Composer Manager...
Gerenciador do compositor...
@@ -5711,947 +5686,939 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Novo a partir de um modelo
- Preview Mode
Modo de pré-visualização
- Paste Features as
Colar Recursos como
- &New
&Novo
- &Open...
&Abrir...
- &Save
&Salvar
- Save &As...
Salvar &Como...
- Exit QGIS
Sair do QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
&Desfazer
- Ctrl+Z
Ctrl+Z
- &Redo
&Refazer
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Recortar Feições
- Ctrl+X
Ctrl+X
- Copy Features
Copiar feições
- Ctrl+C
Ctrl+C
- Paste Features
Colar feições
- Ctrl+V
Ctrl+V
- Add Feature
Adicionar feição
- Ctrl+.
Ctrl+.
- Move Feature(s)
Mover feições
- Reshape Features
Remodelar feições
- Split Features
Quebrar Feições
- Split Parts
DividirPartes
- Delete Selected
Excluir selecionado(s)
- Add Ring
Adicionar anel
- Add Part
Adicionar parte
- Simplify Feature
Simplificar feições
- Delete Ring
Excluir Anel
- Delete Part
Excluir Parte
- Merge Selected Features
Mesclar feições selecionadas
- Merge Attributes of Selected Features
Mesclar atributos de feições selecionadas
- Node Tool
Ferramenta de nós
- Rotate Point Symbols
Rotacionar pontos com símbolo
- Snapping Options...
Opções de ajuste...
- Pan Map
Panorâmica no Mapa
- Zoom In
Aproximar
- Ctrl++
Ctrl++
- Zoom Out
Afastar
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Uma feição simples
+ Uma feição simples
+ Select Features by Rectangle
- Feições através de retângulo
+ Feições através de retângulo
- Select Features by Polygon
Feições através de polígono
- Select Features by Freehand
Feições através de traço livre
- Select Features by Radius
Feições através de raio
- Deselect Features from All Layers
Desfazer seleção de feições em todas as camadas
- Identify Features
Identificar feições
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Linha
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Área
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Ângulo
- Zoom Full
Ver tudo
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Aproximar à camada
- Zoom to Selection
Aproximar à seleção
- Ctrl+J
Ctrl+J
- Zoom Last
Última visualização
- Zoom Next
Próxima visualização
- Zoom Actual Size
Aproximar ao tamanho real
- Zoom to Native Pixel Resolution
Aproximar à resolução nativa do pixel
- Map Tips
Dicas do Mapa
- Show information about a feature when the mouse is hovered over it
Mostrar informação sobre a feição quando o mouse passar sobre ela
- New Bookmark...
Novo Favorito...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Mostrar Favoritos
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Atualizar
- Text Annotation
Anotação de texto
- Form Annotation
Anotação de formulário
- Move Annotation
Mover anotação
- Labeling
Rotular
- Layer Labeling Options
Opções de Rotulação da Camada
- New Shapefile Layer...
Camada do tipo shape...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Camada SpatiaLite ...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Calculadora Raster ...
- Add Vector Layer...
Adicionar camada vetorial...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Adicionar camada raster...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Adicionar camada PostGIS...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Adicionar camada SpatiaLite...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Adicionar camada MSSQL Spatial...
- Add Oracle Spatial Layer...
Adicionar Camada Oracle Spatial
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Adicionar camada WMS/WMTS...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Abrir Tabela de Atributos
- Toggle Editing
Alternar edição
- Toggles the editing state of the current layer
Alterna o estado de edição da camada ativa
- Save for Selected Layer(s)
Salvar para a(s) Camada(s) Selecionada(s)
- Save edits to current layer, but continue editing
Salva alterações na camada atual e continua editando
- Save As...
Salvar como...
- Add from Layer Definition File...
Adicionar a partir de Arquivo de Definição de Camada...
- Save As Layer Definition File...
Salvar como Arquivo de Definição de Camada
- Normal
Normal
- Normal preview mode
Modo de pré-visualização normal
- Simulate Photocopy (Grayscale)
Simular fotocópia (tons de cinza)
- Simulate photocopy (grayscale)
Simular fotocópia (tons de cinza)
- Simulate Fax (Mono)
Simular fax (mono)
- Simulate fax (mono)
Simular fax (mono)
- Simulate Color Blindness (Protanope)
Simular daltonismo (Protanopia)
- Simulate color blindness (protanope)
Simular daltonismo (protanopia)
- Simulate Color Blindness (Deuteranope)
Simular daltonismo (Deuteranopia)
- Simulate color blindness (deuteranope)
Simular daltonismo (deuteranopia)
- Set Scale Visibility of Layer(s)
Definir a Escala de Visibilidade das Camada(s)
- Remove Layer(s)
Remover Camada(s)
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Definir SRC da(s) Camada(s)
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Definir o SRC do projeto a partir da camada
- Properties...
Propriedades...
- Query...
Pesquisa...
- Add to Overview
Adicionar para a Visão Geral
- Add All to Overview
Adicionar tudo para a Visão Geral
- Remove All from Overview
Remover tudo da Visão Geral
- Show All Layers
Mostrar Todas as Camadas
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Ocultar Todas as Camadas
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Gerenciar e Instalar Complementos...
- Open Field Calculator
Abrir Calculadora de campo
- Add Delimited Text Layer...
Adicionar camada a partir de um texto delimitado...
- Add Delimited Text Layer
Adicionar uma Camada de Texto Delimitado
- New Vector Layer
Nova camada vetorial
- Paste features in clipboard into a new OGR vector layer.
Colar recursos da área de transferência dentro de uma nova camada vetorial OGR
- New Memory Vector Layer
Nova camada vetorial em memória
- Paste features in clipboard into a new memory vector layer.
Colar recursos da área de transfêrencia em uma nova camada vetorial em memória
- Toggle Full Screen Mode
Mudar para o Modo de Tela Inteira
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Propriedades do projeto...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Opções...
- Custom CRS...
SRC Personalizado...
- Configure shortcuts...
Configurar atalhos...
- Local Histogram Stretch
Extensão do Histograma Local
- Stretch histogram of active raster to view extents
Estender o histograma do raster ativo aos limites da visão
- Help Contents
Conteúdo da Ajuda
- F1
F1
- API documentation
Documentação API
- QGIS Home Page
Página do QGIS
- Ctrl+H
Ctrl+H
- Check QGIS Version
Verificar a versão do QGIS
- Check if your QGIS version is up to date (requires internet access)
Verificar se seu QGIS é a versão atual
- About
Sobre
- QGIS Sponsors
Patrocinadores
- Move Label
Mover Rótulo
- Rotate Label
Rotacionar Rótulo
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Rotacionar rótulo Ctl (Cmd) com incrementos de 15 graus.
- Change Label
Modificar Rótulo
- Style Manager...
Gerenciador de estilos...
- Python Console
Terminal Python
- Full histogram stretch
Extensão total do histograma
- Stretch Histogram to Full Dataset
Estender o histograma para a base de dados total
- Customization...
Personalização...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Isto está aqui apenas para evitar conflitos de atalhos, o atalho é selecionado em QgsCustomization
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Incorporar camadas e grupos...
- Embed layers and groups from other project files
Incorporar camadas e grupos de outros arquivos de projetos
- &Copyright Label
&Rótulo de Copyright
- Creates a copyright label that is displayed on the map canvas.
Cria um rótulo de copyright que será mostrada na tela do mapa.
- &North Arrow
&Rosa dos ventos
- "Creates a north arrow that is displayed on the map canvas"
"Cria uma rosa dos ventos que será mostrada na tela"
- &Scale Bar
&Barra de escala
- Creates a scale bar that is displayed on the map canvas
Cria uma barra de escala que é exibida na tela
- Add WFS Layer...
Adicionar camada WFS...
- Add WFS Layer
Adiciona camada WFS
- Feature Action
Ação de feição
- Run Feature Action
Rodar ação de feição
- Pan Map to Selection
Mover mapa para seleção
- Touch zoom and pan
Toque de zoom e pan
- Offset Curve
Curva de deslocamento
- Copy style
Copiar estilo
- Paste style
Colar estilo
- Add WCS Layer...
Adicionar camada WCS...
- &Grid
&Grade
- Grid
Grade
- Pin/Unpin Labels
Fixar/Soltar Rótulos
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6662,44 +6629,44 @@ Desmarcar, Ctl (Cmd) alterna o estado
Agir para todas as camadas editáveis
- Highlight Pinned Labels
Destacar rótulos fixados
- New Blank Project
Novo projeto em branco
- Local Cumulative Cut Stretch
Trecho de corte cumulativo local
- Local cumulative cut stretch using current extent, default limits and estimated values.
Trecho de corte cumulativo local usando a extenção atual, limites padrão e valores estimados.
- Full Dataset Cumulative Cut Stretch
Trecho de corte cumulativo para todo o conjunto de dados
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Trecho de corte cumulativo local usando toda a extenção do conjunto de dados, limites padrão e valores estimados.
- Show/Hide Labels
Mostrar/esconder rótulos
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6710,128 +6677,128 @@ Shift+clique ou marque o rótulo para escondê-lo
Agir na camada editável atual
- Html Annotation
Anotação HMTL
- Duplicate Layer(s)
Duplicar Camadas(s)
- SVG annotation
Anotação SVG
- Save for All Layers
Salvar para Todas as Camadas
- Rollback for All Layers
Reverter para Todas as Camadas
- Cancel for All Layers
Cancelar para Todas as Camadas
- Rollback for Selected Layer(s)
Reverter para a(s) Camada(s) Selecionada(s)
- Current Edits
Edições atuais
- Cancel for Selected Layer(s)
Cancelar para a(s) Camada(s) Selecionada(s)
- Save Layer Edits
Salvar Edições da Camada
- Rotate Feature(s)
Rotacionar Feição(s)
- &Download data
&Baixar dados
- &Import topology from XML
&Importar topologia a partir de um XML
- &Export topology to SpatiaLite
&Exportar topologia para SpatiaLite
- Increase brightness
Aumentar brilho
- Decrease brightness
Reduzir brilho
- Increase contrast
Aumentar contraste
- Decrease contrast
Reduzir contraste
- Select By Expression
Selecionar por Expressão
- Select features using an expression
Selecionar feições usando uma expressão
- Need commercial support?
Precisa de suporte comercial?
- DXF Export...
Exportar DXF...
- Fill Ring
Preencher Anel
@@ -7277,11 +7244,6 @@ Agir na camada editável atual
Can't save model
Impossível salvar o modelo
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
Modelo não contém quaisquer algoritmos e/ou parâmetros e não pode ser executado
@@ -7309,7 +7271,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- O modelo selecionado não pôde ser carregado.
+ O modelo selecionado não pôde ser carregado.
Linha errada: %s
@@ -8160,22 +8122,22 @@ Linha errada: %s
Estimando derivados normais...
- minidump written to %1
minidump escrito para %1
- writing of minidump to %1 failed (%2)
escrever minidump para %1 falhou (%2)
- creation of minidump to %1 failed (%2)
criação de minidump para %1 falhou (%2)
- Crash dumped
O problema foi salvo
@@ -8325,6 +8287,7 @@ Erro(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
SRC gerado
@@ -8489,85 +8452,85 @@ Erro(%2): %3
Impossível converter '%1' para Intervalo
- Cannot convert '%1' to boolean
Impossível converter '%1' para booleano
- Domain max must be greater than domain min
Domínio max deve ser maior que o domínio min
- Exponent must be greater than 0
Expoente deve ser maior que 0
- Invalid regular expression '%1': %2
Expressão regular inválida '%1': %2
- Index is out of range
Índice está fora do intervalo
- Cannot convert '%1:%2:%3' to color
Impossível converter '%1:%2:%3' para cor
- Cannot convert '%1:%2:%3:%4' to color
Impossível converter '%1:%2:%3:%4' para cor
- "%1" is not a valid color ramp
"%1" não é uma cor válida para gradiente
- Cannot convert '%1:%2:%3:%4:%5' to color
Impossível converter '%1:%2:%3:%4:%5' para cor
- function help for %1 missing
função de ajuda para %1 perdida
- Operators
Operadores
- Fields and Values
Campos e valores
- Math
Matemática
- Conversions
Conversões
- Conditionals
Condicionais
@@ -8614,58 +8577,58 @@ Erro(%2): %3
ano|anos
- Date and Time
Data e hora
- String
String
- Color
Cor
- Geometry
Geometria
- Record
Registro
- No root node! Parsing failed?
Sem nó raiz! Análise falhou?
- (no root)
(sem raiz)
- Unary minus only for numeric values.
Unário menos apenas para valores numéricos.
- Can't preform /, *, or % on DateTime and Interval
Impossivel preformar /,*, ou % em DataHora e Intervalo
- [unsupported type;%1; value:%2]
[tipo não suportado;%1; valor:%2]
- Column '%1' not found
Coluna '%1' não encontrada
@@ -8753,10 +8716,7 @@ Erro(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- linha %1 contém %n nó duplicado em %2
- linha %1 contém %n nó(s) duplicados em %2
-
+ linha %1 contém %n nó duplicado em %2 linha %1 contém %n nó(s) duplicados em %2
Version 0.1
@@ -9877,6 +9838,7 @@ Apenas %1 de %2 feições escritas.
Layers
Camadas
@@ -10455,12 +10417,14 @@ Apenas %1 de %2 feições escritas.
Ferramenta para importar um arquivo shape para PostgreSQL/PostGIS
+ SQL Anywhere plugin
- Complemento SQL Anywhere
+ Complemento SQL Anywhere
+ Store vector layers within a SQL Anywhere database
- Armazena camadas vetoriais dentro de uma base de dados SQL Anywhere
+ Armazena camadas vetoriais dentro de uma base de dados SQL Anywhere
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS não encontrou sua instalação do GRASS.
Você gostaria de especificar um caminhos (GISBASE) para sua instalação GRASS?
@@ -10901,7 +10865,7 @@ Você gostaria de especificar um caminhos (GISBASE) para sua instalação GRASS?
Impossível criar arquivo %1.qpj
- Fetching features failed.
SQL:%1
Error: %2
@@ -10910,7 +10874,7 @@ SQL:%1
Erro: %2
- Oracle
Oracle
@@ -11370,12 +11334,14 @@ SQL: %1
feição multiparte
+ Error describing bind parameters
- Erro ao descrever parâmetros vinculados
+ Erro ao descrever parâmetros vinculados
+ Error binding parameters
- Erro em parâmetros vinculados
+ Erro em parâmetros vinculados
Read-only field that generates a UUID if empty.
Campo somente leitura que gera uma UUID se vazio.
-
- Legend
- Legenda
-
QSpatiaLiteDriver
- Error opening database
Erro ao abrir base de dados
- Error closing database
Erro ao fechar base de dados
- Unable to begin transaction
Impossível iniciar transação
- Unable to commit transaction
Impossível enviar transação
- Unable to rollback transaction
Impossível retornar transação
@@ -11580,27 +11541,27 @@ Resposta foi:
Sem consulta
- Unable to execute statement
Impossível executar instrução
- Unable to execute multiple statements at a time
Impossível executar instruções múltiplas em uma vez
- Unable to reset statement
Impossível reiniciar instrução
- Unable to bind parameters
Impossível vincular parâmetros
- Parameter count mismatch
Incompatibilidade na contagem do parâmetro
@@ -11777,61 +11738,61 @@ Resposta foi:
QGIS pronto!
- Minimize
Minimizar
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Minimizar a janela ativa para o espaço
- Zoom
Visualizar
- Toggles between a predefined size and the window size set by the user
Trocar entre um tamanho predefinido para um tamanho de janela ajustado pelo usuário
- Bring All to Front
Trazer Tudo para Frente
- Bring forward all open windows
Trazer para frente todas as janelas abertas
- Current Edits
Modificações atuais
- Error
Erro
- Failed to open Python console:
Falha ao abrir console Phyton:
@@ -11854,138 +11815,138 @@ Por favor contate os desenvolvedores.
QGIS - %1 ('%2')
- Panels
Painéis
- Toolbars
Barra de Ferramentas
- Window
Janela
- &Database
&Base de dados
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
A barra de progresso mostra o status da renderização das camadas e outras operações que levam muito tempo
- Toggle extents and mouse position display
Ativar a visualização da extensão do mapa e a posição do mapa
- Coordinate:
Coordenada:
- Current map coordinate
Coordenada atual do mapa
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Mostra as coordenadas do mapa na posição atual do cursor. A tela é continuamente atualizada com o movimento do mouse. Isto permite editar para fixar a tela no centro para uma posição fornecida. O formato é lat,long ou leste,norte
- Current map coordinate (lat,lon or east,north)
Mapa de coordenadas atual (lat,long ou leste,norte)
- Scale
Escala
- Current map scale
Escala atual do mapa
- Displays the current map scale
Exibe a escala atual do mapa
- Current map scale (formatted as x:y)
Escala do mapa atual (formatada como x:y)
- Render
Renderizar
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Quando marcadas, as camadas do mapa são desenhadas em resposta aos comandos de navegação pelo mapa e outros eventos. Quando não marcadas, nenhuma renderização será feita. Isso permite que você adicione um grande número de camadas e as altere antes de renderizá-las.
- Toggle map rendering
Ativa a renderização do mapa
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Este ícone mostra se a transformação do sistema de coordenadas em tempo real está habilitada ou não. Clique no ícone para abrir a janela de propriedade e alterar este comportamento.
- CRS status - Click to open coordinate reference system dialog
Situação do SRC - Clique para abrir a janela do sistema de referência de coordenadas
- Ready
Pronto
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Visão geral da área do mapa. Esta área pode ser usado para mostrar um localizador na área total do mapa. A extensão atual é mostrada como um retângulo vermelho. Qualquer camada do mapa pode ser adicionada para a visão geral.
- Overview
Visão Geral
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
A legenda do mapa mostra todas as camadas na área do mapa. Clique na caixa para ativar ou desativar a camada. Duplo clique em uma camada em sua legenda serve para customizar sua aparência e ajustar outras propriedades.
- Layers
Camadas
- Map layer list that displays all layers in drawing order.
A lista de camadas do mapa mostra todas as camadas na ordem de renderização.
- Layer order
Ordem de camada
@@ -11995,394 +11956,388 @@ Por favor contate os desenvolvedores.
Bloqueie qgis.db
- < Blank >
< Blank >
- QGIS version
Versão do QGIS
- QGIS code revision
Código da versão do QGIS
- Compiled against Qt
Compilado sobre Qt
- Running against Qt
Rodando sobre Qt
- Compiled against GDAL/OGR
Compilado sobre GDAL/OGR
- Running against GDAL/OGR
Rodando sobre GDAL/OGR
- PostgreSQL Client Version
Versão do cliente PostgreSQL
- No support.
Sem suporte.
- SpatiaLite Version
Versão SpatiaLite
- QWT Version
Versão do QWT
- PROJ.4 Version
Versão PROJ.4
- QScintilla2 Version
Versão QScintilla2
- This copy of QGIS writes debugging output.
Esta cópia do QGIS grava saídas de depuração.
- %1 doesn't have any layers
%1 não possui quaisquer camadas
- Invalid Data Source
Fonte de Dados Inválida
- %1 is not a valid or recognized data source
%1 não é uma fonte de dados reconhecida
- Vector
Vetor
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Impossível obter diálogo PostgreSQL selecionado de um provedor.
- %1 is an invalid layer - not loaded
%1 é uma camada inválida - não carregada
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 é uma camada inválida e não pode ser carregada. Verifique a <a href="#messageLog">mensagem de registro</a> para mais informações.
- QGIS files
Arquivos QGIS
- No legend entries selected
Não há entradas de legenda selecionadas
- Select the layers and groups you want to remove in the legend.
Selecione as camadas e grupos que você deseja remover na legenda.
- Remove layers and groups
Remover as camadas e grupos
- Remove %n legend entries?
number of legend items to remove
-
- Remover %n entrada da legenda?
- Remover %n entradas da legenda?
-
+ Remover %n entrada da legenda? Remover %n entradas da legenda?
- %n legend entries removed.
number of removed legend entries
-
- %n entrada da legenda removida.
- %n entradas da legenda removidas.
-
+ %n entrada da legenda removida. %n entradas da legenda removidas.
- %1 (%2 type unsupported)
%1 (%2 tipo não-suportado)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/en/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Você quer salvar o projeto atual? %1
- Invalid Layer
Camada Inválida
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Impossível obter diálogo SpatiaLite selecionado de um provedor.
- Delimited Text
Texto delimitado
- Cannot get Delimited Text select dialog from provider.
Impossível obter Texto Delimitado selecionado de um provedor.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Impossível obter diálogo MSSQL selecionado de um provedor.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Impossível obter diálogo Oracle selecionado de um provedor.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Impossível obter diálogo WMS selecionado de um provedor.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Impossível obter diálogo WCS selecionado de um provedor.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Impossível obter diálogo WFS selecionado de um provedor.
- Default failed to open: %1
Padrão falhou ao abrir: %1
- Default not found: %1
Padrão não encontrado: %1
- Open Template Project
Abrir Modelo de Projeto
- Auto-open Project
Auto-abrir Projeto
- Failed to open: %1
Falha ao abrir: %1
- Not valid project file: %1
Arquivo de projeto válido: %1
- Project failed to open: %1
Projeto falhou ao abrir: %1
- Default template has been reopened: %1
Modelo padrão deve ser reaberto: %1
- File not found: %1
Arquivo não encontrado: %1
- Calculating...
Calculando...
- Abort...
Abortar...
- Choose a QGIS project file to open
Escolha um projeto do QGIS para abrir
- Loading project: %1
Carregar projeto: %1
- Unable to open project
Impossível abrir projeto
- Security warning
Aviso de segurança
- project macros have been disabled.
macros de projeto foram desabilitadas.
- Enable macros
Habilitar macros
- Project loaded
Projeto carregado
- Choose a QGIS project file
Escolha um projeto do QGIS
- Saved project to: %1
Salvar projeto em: %1
- Unable to save project %1
Impossível salvar projeto %1
- Choose a file name to save the QGIS project file as
Escolha um nome para salvar o projeto do QGIS
- Unable to load %1
Impossível carregar %1
- Choose a file name to save the map image as
Escolha um nome para salvar a imagem do mapa
- Saved map image to %1
Mapa de imagem salva para %1
- Default system font substituted.
Fonte padrão do sistema substituída.
- Labeling
Rotular
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
Fonte para a camada <b><u>%1</u></b> não foi encontrada (<i>%2</i>). %3
- Open labeling dialog
Abrir diálogo de rotulação
@@ -12483,451 +12438,445 @@ Por favor contate os desenvolvedores.
Data/Hora
- Compiled against GEOS
Compilado sobre GEOS
- Running against GEOS
Rodando sobre GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
Falha na criação de camada. Por favor, verifique o <a href="#messageLog"> log de mensagem</a> para mais informações.
- Insufficient permissions
Permissões insuficientes
- The project file is not writable.
O arquivo de projeto não é gravável.
- DXF export completed
Exportação de DXF concluída
- DXF export failed
Exportação de DXF falhou
- Commit errors
Enviar erros
- Could not commit changes to layer %1
Impossível enviar modificações para a camada %1
- Errors: %1
Erros: %1
- Show more
Mostrar mais
- Labeling Options
Opções de rotulação
- Please select a vector layer first
Selecione primeiro uma camada vetorial
- Layer labeling settings
Configurações de rótulo de camada
- Reading raster
Lendo raster
- Cannot write raster error code: %1
Impossível escrever código de erro raster: %1
- Saving done
Salvo
- Export to vector file has been completed
Exportação para arquivo vetorial concluída
- Save error
Erro ao salvar
- Export to vector file failed.
Error: %1
Falha ao exportar para arquivo vetorial.
Erro: %1
- No Layer Selected
Nenhuma Camada Selecionada
- To delete features, you must select a vector layer in the legend
Para excluir feições. você precisa selecionar uma camada vetorial
- No Vector Layer Selected
Nenhuma camada vetorial selecionada
- Deleting features only works on vector layers
Excluir feições funciona apenas em camadas vetoriais
- Provider does not support deletion
O provedor não suporta exclusão
- Data provider does not support deleting features
O provedor de dados não suporta excluir feições
- Layer not editable
A camada não pode ser editada
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
A camada atual não é editável. Escolha 'Iniciar edição' na barra da ferramentas de digitalização
- No Features Selected
Nenhum recurso selecionado
- The current layer has not selected features
A camada atual não tem recursos selecionados
- Delete features
Excluir feições
- Delete %n feature(s)?
number of features to delete
-
- Excluir %n feição?
- Excluir %n feições?
-
+ Excluir %n feição? Excluir %n feições?
- Features deleted
Feições excluídas
- Problem deleting features
Problema ao excluir feições
- A problem occured during deletion of features
Um problema ocorreu durante a exclusão das feições
- %n feature(s) deleted.
number of features deleted
-
- %n recurso apagado.
- %n recurso(s) apagados.
-
+ %n recurso apagado. %n recurso(s) apagados.
- Merging features...
Mesclando feições...
- Abort
Abortar
- Create unique print composer title
Criar um título único ao compositor de impressão
- (title generated if left empty)
(será gerado um título se deixar vazio)
- Composer title
Título do compositor
- Title can not be empty!
Título não pode ser vazio!
- Title already exists!
Título já existe!
- Composer %1
Compositor %1
- copy
copiar
- No active layer
Nenhuma camada ativa
- No active layer found. Please select a layer in the layer list
Nenhuma camada ativa encontrada. Selecione uma camada na lista de camadas
- Active layer is not vector
Camada ativa não vetorial
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
A ferramente de mesclar feições trabalha apenas com camadas vetoriais. Selecione uma camada vetorial a partir da lista de camadas
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Mesclar feições pode ser apenas efetivada no modo de edição. Para usar a ferramenta mesclar, vá em Camadas > Editar Toggle
- Not enough features selected
Feições selecionadas insuficientes
- The merge tool requires at least two selected features
A ferramenta de mesclar requer pelo menos duas feições selecionadas
- Merged feature attributes
Mesclar feições de atributo
- Merge failed
Falha ao mesclar
- An error occured during the merge operation
Um erro ocorreu no processo de mescla
- Union operation canceled
Operação de união cancelada
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
A operação de união espera resultados no tipo de geometria que não é compatível com a camada atual e, em vista disso está cancelado
- Merged features
Mesclar feições
- No active vector layer
Sem camada vetorial ativa
- To select features, choose a vector layer in the legend
Para selecionar feições, escolha uma camada vetorial na legenda
- Features cut
Corta feições
- Features pasted
Cola feições
- Paste features
Colar feições
- no features could be successfully pasted.
nenhuma feição pode ser colada com sucesso.
- %1 features were successfully pasted.
%1 feições foram coladas com sucesso.
- %1 of %2 features could be successfully pasted.
%1 de %2 feições poderiam ser coladas com êxito.
- Pasted
Colado
- New memory layer name
Novo nome de camada de memória
- Layer name
Nome da camada
- No features in clipboard.
Nenhuma feição na área de transferência.
- No features with geometry found, point type layer will be created.
Nenhuma feição com geometria encontrada, uma camada do tipo ponto será criada.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Múltiplas tipos de geometria encontrado, feições com geometria diferente de %1 será criada sem geometria.
- Cannot create new layer
Não é possível criar uma nova camada
- Cannot create field %1 (%2,%3)
Não é possível criar o campo %1 (%2,%3)
- Cannot copy style: %1
Impossível copiar o estilo %1
- Cannot parse style: %1:%2:%3
Impossível analizar o estilo: %1
- Cannot read style: %1
Impossível ler o estilo%1
- Start editing failed
Falha ao iniciar a edição
- Provider cannot be opened for editing
Provedor não pode ser aberto para edição
- Stop editing
Parar edição
- Do you want to save the changes to layer %1?
Você quer salvar as mudanças para a camada %1?
- Problems during roll back
Problemas durante retorno
- Could not %1 changes to layer %2
Errors: %3
@@ -12938,343 +12887,340 @@ Erros: %3
- rollback
reverter
- cancel
cancelar
- Save
Salvar
- all
todos
- Rollback
Reverter
- Cancel
Cancelar
- Current edits
Edições atuais
- %1 current changes for %2 layer(s)?
%1 mudanças atuais para %2 camada(s)?
- copy
copiar
- Plugin layer
Complemento camada
- Memory layer
Memória da camada
- Duplicate layer:
Camada duplicada:
- %1 (duplication resulted in invalid layer)
%1 (duplicação resultou em uma camada inválida)
- Set scale visibility for selected layers
Definir a visibilidade de escala para camadas selecionadas
- Couldn't load Python support library: %1
Impossível carregar biblioteca de suporte python: %1
- Couldn't resolve python support library's instance() symbol.
Impossível resolver instância() símbolo da bilioteca de suporte python.
- Python support ENABLED :-)
Suporte python HABILITADO :-)
- There is a new version of QGIS available
Existe uma nova versão do QGIS disponível
- You are running a development version of QGIS
Você está executando uma versão de desenvolvimento do QGIS
- You are running the current version of QGIS
Você está rodando a versão atual do QGIS
- Would you like more information?
Gostaria de obter mais informações?
- QGIS Version Information
Informações sobre a versão do QGIS
- QGIS - Changes since last release
QGIS - mudanças desde a última versão
- Unable to get current version information from server
Impossível obter informações sobre a versão atual
- Connection refused - server may be down
Conexão recusada - o servidor pode estar indisponível
- QGIS server was not found
Servidor do QGIS não foi encontrado
- Unknown network socket error: %1
Erro desconhecido de rede: %1
- Unable to communicate with QGIS Version server
%1
Impossível comunicar com o servidor de versão do QGIS
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
Para executar um trecho de histograma completo, você precisa ter uma camada raster selecionado.
- To change brightness or contrast, you need to have a raster layer selected.
Para mudar brilho ou contraste você precisa ter uma camada raster selecionada.
- en
documentation language
pt_BR
- Layer is not valid
Camada não é válida
- The layer %1 is not a valid layer and can not be added to the map
A camada %1 não é uma camada válida e não pode ser adicionada ao mapa
- The layer is not a valid layer and can not be added to the map
A camada não é uma camada válida e não pode ser adicionada ao mapa
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
O projeto possui camada(s) no modo de edição com modificações não salvas, que não serão salvas!
- Save?
Salvar?
- Current CRS: %1 (OTFR enabled)
SRC atual: %1 (OTFR habilitado)
- Current CRS: %1 (OTFR disabled)
SRC atual: %1 (OTFR desabilitado)
- Map coordinates for the current view extents
Mapear as coordenadas para corrente extensão da visão
- Map coordinates at mouse cursor position
Coordenadas onde o cursor do mouse se encontra
- Extents:
Extensão:
- Maptips require an active layer
Detalhes do Mapa requer uma camada ativada
- %n feature(s) selected on layer %1.
number of selected features
-
- %n feição selecionadas na camada %1.
- %n feição(ões) selecionadas na camada %1.
-
+ %n feição selecionadas na camada %1. %n feição(ões) selecionadas na camada %1.
- Open a GDAL Supported Raster Data Source
Abrir uma fonte de dados raster GDAL suportada
- Error adding valid layer to map canvas
Erro ao adicionar uma camada válida à tela
- Raster layer
Camada raster
- %1 is not a supported raster data source
%1 não é uma fonte de dados raster suportada
- Unsupported Data Source
Fonte de dados não suportada
- Exit QGIS
Sair do QGIS
- Do you really want to quit QGIS?
Você realmente deseja sair do QGIS?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Este arquivo de projeto foi salvo por uma versão mais antiga do QGIS. Ao salvar esse arquivo de projeto, o QGIS irá atualizá-lo para a versão mais recente, possivelmente tornando-o inútil para versões mais antigas do QGIS.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p> Este projeto foi salvo em uma versão antiga do QGIS. Quando você salvar o arquivo do projeto, o QGIS irá atualizá-lo para a versão atual, sendo impossível, depois disso, abri-lo em uma versão mais antiga.<p> Sempre que os desenvolvedores tentam manter compatibilidade com versões anteriores, algumas informações do projeto antigo pode se perder. Para manter a qualidade do QGIS, nós esperamos que você nos informe sobre sobre o bug %3. Esteja certo em incluir o arquivo do projeto antigo, e em quais versões você gerou este arquivo e o mesmo apresentou problema.<p> Para remover este aviso quando abrir um projeto antigo, desabilite a caixa '%5' no menu %4.<p> Versão em que você gerou o arquivo do projeto: %1<br>Versão atual do QGIS: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Configurações:Opções:Geral</tt>
- Warn me when opening a project file saved with an older version of QGIS
Avisar-me quando abrir um arquivo de projeto salvado por uma versão mais velha do QGIS
- Project file is older
O arquivo do projeto é mais velho
- This project file was saved by an older version of QGIS
Este arquivo de projeto foi salvo por uma versão mais antiga do QGIS
- Please check the <a href="#messageLog">message log</a> for further info.
Por favor, verifique o <a href="#messageLog"> log de mensagem</a> para uma informação mais adicional.
- A network request timed out, any data received is likely incomplete.
A solicitação de rede expirou, todos os dados recebidos podem estar incompletos.
- Warning
Atenção
- This layer doesn't have a properties dialog.
Esta camada não possui diálogo de propriedades.
- Authentication required
Autenticação necessária
- Proxy authentication required
Autenticação proxy necessária
- SSL errors occured accessing URL %1:
Erro SSL ocorreu ao acessar URL %1:
-
Always ignore these errors?
@@ -13283,13 +13229,10 @@ Always ignore these errors?
Sempre ignorar estes erros?
- %n SSL errors occured
number of errors
-
- %n erro SSL ocorridos
- %n erros SSL ocorridos
-
+ %n erro SSL ocorridos %n erros SSL ocorridos
@@ -13321,7 +13264,7 @@ Sempre ignorar estes erros?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13675,19 +13618,19 @@ O site da da comunidade QGIS Brasil.
QgsApplication
- Exception
Exceção
- unknown exception
Exceção desconhecida
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13712,7 +13655,7 @@ Caminho ao BD do Usuário: %9
-
match indentation of application state
@@ -13720,24 +13663,24 @@ Caminho ao BD do Usuário: %9
- [ERROR] Can not make qgis.db private copy
[ERRO] Impossível faver um a cópia privada de qgis.db
- Could not open qgis.db
Impossível abrir qgis.db
- Migration of private qgis.db failed.
%1
Falha na migração qgis.db.
%1
- Update of view in private qgis.db failed.
%1
Falha na atualização da visão no qgis.db privado.
@@ -13747,28 +13690,28 @@ Caminho ao BD do Usuário: %9
QgsAtlasComposition
- Atlas filter eval error: %1
Erro de avaliação no Filtro do Atlas: %1
- Composer
Compositor
- No matching atlas features
Nenhuma funcionalidade atlas correspondente
- Atlas feature %1 of %2
Funcionalidade Atlas %1 de %2
- Atlas filename evaluation error: %1
Erro de avaliação no Filtro do Atlas: %1
@@ -13784,7 +13727,7 @@ Caminho ao BD do Usuário: %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Não foi possível definir o padrão de nome de arquivo como '%1'.
@@ -14479,10 +14422,7 @@ Erro do analisador:
Attribute table - %1 (%n Feature(s))
feature count
-
- Tabela de atributos - %1 (%n Feição)
- Tabela de atributos - %1 (%n Feições)
-
+ Tabela de atributos - %1 (%n Feição) Tabela de atributos - %1 (%n Feições)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Tem certeza que deseja excluir %n favorito?
- Tem certeza que deseja excluir %n favorito(s)?
-
+ Tem certeza que deseja excluir %n favorito? Tem certeza que deseja excluir %n favorito(s)?
QgsCategorizedSymbolRendererV2Model
- Symbol
Símbolo
- Value
Valor
- Label
Rótulo
@@ -15265,49 +15202,49 @@ Base de dados:%2
Avançado
- Random colors
Cores aleatórias
- Symbol levels...
Níveis de símbolos...
- High number of classes!
Número alto de classes!
- Classification would yield %1 entries which might not be expected. Continue?
Classificação renderia %1 entradas que não podem ser esperadas. Continuar?
- Error
Erro
- There are no available color ramps. You can add them in Style Manager.
Não existem cor de rampas disponíveis. Você pode adicioná-las no Gerenciador de Estilos.
- The selected color ramp is not available.
A cor de rampa selecionada não está disponível.
- Confirm Delete
Confirma exclusão
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
O campo de classificação foi mudado de '%1' para '%2'.
Existem classes que podem ser excluídas antes da classificação?
@@ -15365,25 +15302,20 @@ Existem classes que podem ser excluídas antes da classificação?
QgsColorButton
- Select Color
Selecionar cor
- Copy color
Copiar cor
- Paste color
Colar cor
-
- Pick color
-
QgsColorDialog
@@ -15455,7 +15387,7 @@ Existem classes que podem ser excluídas antes da classificação?
Composer
Compositor
@@ -15614,8 +15546,8 @@ Existem classes que podem ser excluídas antes da classificação?
Set as atlas feature for %1
Definir como feição atlas para %1
@@ -15652,7 +15584,7 @@ Existem classes que podem ser excluídas antes da classificação?
Choose a file name to save the map as
Escolha um nome para salvar o mapa como
@@ -15663,15 +15595,15 @@ Existem classes que podem ser excluídas antes da classificação?
Empty filename pattern
Padrão vazio de nome de arquivo
The filename pattern is empty. A default one will be used.
O padrão de nome de arquivo está vazio. Um padrão será usado.
@@ -15682,15 +15614,15 @@ Existem classes que podem ser excluídas antes da classificação?
Unable to write into the directory
Impossível escrever na pasta
The given output directory is not writable. Cancelling.
A pasta de saída não permite escrita. Cancelando.
@@ -15700,251 +15632,251 @@ Existem classes que podem ser excluídas antes da classificação?
Atlas processing error
Erro ao processar atlas
Feature filter parser error: %1
Erro na análise do filtro de feições: %1
Error creating %1.
Erro ao criar% 1.
Rendering maps...
Renderizando mapas...
Abort
Abortar
- Big image
Imagem grande
- To create image %1x%2 requires about %3 MB of memory. Proceed?
Para criar imagem %1x%2 são necessários %3 MB de memória. Preceder?
- Choose a file name to save the map image as
Escolha um nome para salvar a imagem do mapa como
- Memory Allocation Error
Erro ao alocar memória
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
Tentar criar a imagem #%1( %2x%3 @ %4dpi ) pode causar uma sobrecarga de uso de memória.
Tente uma resolução ou um tamanho de papel menor
- Image export error
Erro de exportação de imagem
- Directory where to save image files
Pasta para salvar arquivos de imagem
- Image format:
Formato de imagem:
- SVG warning
Advertência SVG
- Don't show this message again
Não mostrar esta mensagem novamente
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p> A função de exportação SVG tem sérios problemas devido a bugs e deficiências no
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
código Qt4 svg. Em particular, existem problemas com camadas que não são aparadas da caixa limite do mapa.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Se você necessita de um arquivo de saída do tipo vetorial é sugerido que você tente imprimir para PostScript se o SVG criado não foi satisfatório.</p>
- SVG Format
Formato SVG
- Directory where to save SVG files
Pasta para salvar arquivos SVG
- SVG export error
Erro de exportação de SVG
- on page
na página
- SVG error
Erro no SVG
- There was an error in SVG output for SVG layer
Houve um erro na saída SVG para a camada SVG
- copy
copiar
- Duplicating composer...
Duplicando o compositor...
- Duplicate Composer
Duplica o compositor
- Composer duplication failed.
Falha na duplicação do compositor.
- Save template
Salvar modelo
- Composer templates
Modelos do compositor
- Save error
Erro ao salvar
- Error, could not save file
Erro, impossível salvar arquivo
- Load template
Carrega modelo
- Read error
Erro ao ler
- Error, could not read file
Erro, impossível ler arquivo
- Composer error
Erro no compositor
- Error, could not create new composer
Erro, impossível criar novo compositor
- Loading template into composer...
Carregar modelo no compositor...
- Project contains WMS layers
Projeto contém camadas WMS
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Alguns servidores WMS (e. g. UMN Mapserver) tem um limite para os parâmetros LARGURA e ALTURA. Ao imprimir camadas destes servidores, o limite pode ser excedido. Se não for o caso, a camada WMS não será impressa.
- Project contains composition effects
O projeto contém efeitos de composição
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Efeitos de composição avançada como modos de mistura ou transparência de camadas vetoriais estão habilitqados neste projeto, porém não podem ser impressos. Neste caso é sugerido ser impresso como raster.
- Print as raster
Imprimir como raster
- Landscape
Paisagem
@@ -17089,69 +17021,69 @@ Tente uma resolução ou um tamanho de papel menor
QgsComposerItemWidget
- Frame color changed
Cor da moldura modificada
- Background color changed
Cor de fundo modificada
- Item position changed
Posição do item modificada
- Item outline width
Espessura do contorno do item
- Item frame join style
Estilo da união da moldura do item
- Item frame toggled
Alternada a moldura do item
- Item background toggled
Item de fundo alternado
- Select background color
Selecionar a cor de fundo
- Select frame color
Selecione a cor da moldura
- Item blend mode changed
Modo de mistura do item alterado
- Item transparency changed
Transparência do item alterada
- Item id changed
id do item modificada
- Item rotation changed
A Rotação do item mudou
@@ -17164,115 +17096,104 @@ Tente uma resolução ou um tamanho de papel menor
Opções globais
- Position and size
Posição e tamanho
- Reference point
Ponto de referência
- X
X
- Y
Y
- Width
Largura
- Height
Altura
- Page
Página
- ...
- ...
-
-
- Rotation
Rotação
- °
°
- Frame
Moldura
- mm
mm
- Join style
Estilo da união
- Rendering
Renderizar
- Blending mode
Modo de mistura
- Thickness
Espessura
- Color...
Cor...
- Background
Fundo
- Transparency
Transparência
- Item ID
ID do item
- Id
ID
@@ -17305,18 +17226,18 @@ Tente uma resolução ou um tamanho de papel menor
Cor do rótulo modificada
- Insert expression
Inserir expressão
- Label alignment changed
Alinhamento do rótulo modificado
@@ -17422,8 +17343,9 @@ Tente uma resolução ou um tamanho de papel menor
QgsComposerLegend
+ Legend
- Legenda
+ Legenda
@@ -17588,12 +17510,12 @@ Tente uma resolução ou um tamanho de papel menor
Grupo de legenda adicionado
- Map %1
Mapa %1
- None
Nenhum
@@ -18023,107 +17945,100 @@ Tente uma resolução ou um tamanho de papel menor
QgsComposerMap
- Map %1
Mapa %1
- Map will be printed here
O mapa será impresso aqui
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Desenhar
- Rectangle
Retângulo
- Solid
Sólido
- Cross
Cruz
- Markers
-
-
- Decimal
Decimal
- DegreeMinute
GrauMinuto
- DegreeMinuteSecond
GrauMinutoSegundo
+ No frame
- Sem moldura
+ Sem moldura
- Zebra
Zebra
- Map scale changed
Escala do mapa modificada
- Map rotation changed
Rotação do mapa modificada
- Map extent changed
Extensão do mapa modificada
- Select font color
Selecionar a cor da fonte
@@ -18139,235 +18054,164 @@ Tente uma resolução ou um tamanho de papel menor
Selecionar cor do preenchimento da moldura da grade
- Canvas items toggled
Itens da tela alternados
- None
Nenhum
- Overview frame style changed
Estilo da moldura da Visão Geral modificada
- Overview centering mode changed
Modo de centralização da Visão Geral alterado
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- change...
- mudar...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Caixa de verificação da grade alternada
- Grid interval changed
Intervalo do Grid modificado
- Grid offset changed
Deslocamento do Grid modificado
- Grid line style changed
Estilo da linha de grade modificada
- Grid type changed
Tipo do Grid modificado
+ Grid cross width changed
- Espessura da cruz do Grid modificada
+ Espessura da cruz do Grid modificada
- Annotation font changed
Fonte da anotação moficada
+ Label font changed
- Fonte do rótulo modificada
+ Fonte do rótulo modificada
- Annotation distance changed
Distância da anotação modificada
- Annotation format changed
Formato da anotação moficada
- Annotation toggled
Anotação alternada
- Changed annotation precision
Precisão da anotação modificada
- Changed grid frame style
Estilo da grade de moldura modificado
+ Changed grid frame width
- Estilo da grade de moldura modificado
+ Estilo da grade de moldura modificado
- Changed grid frame line thickness
Espessura da linha da moldura da grade alterada
- Grid frame color changed
Cor da moldura da grade alterada
- Grid frame first fill color changed
Primeira cor de preenchimento da moldura da grade alterada
- Grid frame second fill color changed
Segunda cor de preenchimento da moldura da grade alterada
- Inside frame
Dentro da moldura
- Outside frame
Fora da moldura
- Disabled
Desabilitado
- Horizontal
Horizontal
- Vertical
Vertical
- Annotation position changed
Posição da anotação modificada
- Changed annotation direction
Direção da anotação modificada
- Map %1
Mapa %1
@@ -18380,377 +18224,287 @@ Tente uma resolução ou um tamanho de papel menor
Opções de mapa
- Map
Mapa
- Main properties
Propriedades principais
- Update preview
Atualizar pré-visualização
- Scale
Escala
- Map rotation
Rotação do mapa
- Draw map canvas items
Desenhar itens da tela do mapa
- Lock layers for map item
Travar camadas para o item do mapa
- Extents
Extensão
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
Fixa o mapa a extensão da tela
- X min
X min
- View extent in map canvas
Ver extensão na tela do mapa
- Controlled by atlas
Controlado pelo atlas
- Margin around feature
Margem em torno da feição
- %
%
- Fixed scale
Escala fixa
- Use one of the predefined scales of the project where the atlas feature best fits.
Use uma das escalas predefinidas do projeto onde o atlas apresentam melhor se encaixa.
- Predefined scale (best fit)
Escala predefinida (melhor ajuste)
+ Show grid
- Mostrar grade
+ Mostrar grade
+ Grid &type
- &Tipo de grade
+ &Tipo de grade
- Offset
Afastamento
- mm
mm
- Blend mode
Modo de mistura
- Interval
Intervalo
- Grid frame
Moldura da grade
- Frame size
Tamanho da moldura
- Frame line thickness
Espessura da linha da moldura
- Color...
Cor...
- Frame fill colors
Cores de preenchimento da moldura
- Marker style
- Estilo de marcadores
-
-
- Overview blending mode
Visão geral do modo de mistura
- Invert overview
Inverter visão geral
- Center on overview
Centralizar na visão geral
- X
X
- °
°
- Y
Y
- Cross width
Espessura do cruzamento
- Frame style
Estilo de moldura
- Line style
Estilo de linha
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Tipo de grade
-
-
- CRS
- SRC
-
-
- change...
mudar...
- Interval units
-
-
- Map unit
-
-
- Millimeter
-
-
- Centimeter
-
-
- No frame
- Sem moldura
-
-
- Zebra
- Zebra
-
-
- Draw coordinates
Desenhar coordenadas
- Format
Formato
- Left
Esquerda
- Right
Direita
- Top
Topo
- Bottom
Base
- Font
Fonte
- Font...
Fonte...
- Font color
- Cor da fonte
-
-
- Distance to map frame
Distância a moldura do mapa
- Coordinate precision
Precisão da coordenada
- Font color...
Cor da fonte...
- Overview
Visão Geral
- Overview frame
Moldura da visão geral
- Overview style
Estilo da visão geral
- Change...
Mudar ...
@@ -18791,18 +18545,18 @@ Tente uma resolução ou um tamanho de papel menor
QgsComposerPicture
- Picture expression parsing error: %1
Análise de erro na expressão da imagem: 1%
- Composer
Compositor
- Picture expression eval error: %1
Aval de erro na expressão da imagem: 1%
@@ -18817,64 +18571,64 @@ Tente uma resolução ou um tamanho de papel menor
Picture changed
Figura modificada
- Expression based image path
Expressão baseada no trajeto da imagem
- Picture rotation changed
Rotação da figura modificada
- Select new preview directory
Seleciona nova pasta de previsualização
- Picture resize mode changed
modo de redimensionamento de imagem
- Picture placement changed
Posicionamento de imagem alterado
- Picture source changed
mudar fonte da imagem
- Picture source expression
Expressão fonte da imagem
- Rotation synchronisation toggled
Sincronização da rotação alternada
- Rotation map changed
Rotação do mapa modificada
- Map %1
Mapa %1
- Creating icon for file %1
Criar ícone para arquivo %1
@@ -19041,32 +18795,32 @@ Tente uma resolução ou um tamanho de papel menor
QgsComposerScaleBar
- units
unidades
- km
km
- m
m
- miles
milhas
- ft
pés
- Nm
Nm
@@ -19075,38 +18829,38 @@ Tente uma resolução ou um tamanho de papel menor
QgsComposerScaleBarWidget
Single Box
Caixa simples
Double Box
Caixa dupla
Line Ticks Middle
Linhas tracejadas do meio
Line Ticks Down
Linhas tracejadas embaixo
Line Ticks Up
Linhas tracejadas em cima
Numeric
Numérico
@@ -19146,144 +18900,119 @@ Tente uma resolução ou um tamanho de papel menor
Milhas Náuticas
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Selecionar a cor da fonte
-
-
- Select stroke color
-
-
- Map %1
Mapa %1
- Scalebar map changed
Escala do mapa modificada
- Scalebar line width
Espessura da linha da barra de escala
- Scalebar segment size
Tamanho do segmennto da barra de escala
- Scalebar segments left
Seguimentos à esquerda na barra de escala
- Number of scalebar segments changed
Número de seguimentos da barra de escala modificado
- Scalebar height changed
Altura da barra de escala modificado
- Scalebar font changed
Fonte da barra de escala modificada
- Scalebar font color changed
Fonte da barra de escala modificada
- Scalebar color changed
Cor da barra de escala modificada
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Cor do traço da barra de escala modificada
- Scalebar unit text
Unidade de texto da barra de escala
- Scalebar map units per segment
Unidades do mapa por segmento da barra de escala
- Scalebar style changed
Estilo da barra de escala modificado
- Scalebar label bar space
Espaço do rótulo da barra de escala
- Scalebar box content space
Espaço da caixa de conteúdo da barra de escala
- Scalebar alignment
Alinhamento da barra de escala
- Scalebar changed to map units
Barra de escala modificada para unidades do mapa
- Scalebar changed to feet
Barra de escala modificada para pés
- Scalebar changed to nautical miles
Barra de escala modificada para milhas náuticas
- Scalebar changed to meters
Barra de escala modificada para metros
- Scalebar line join style
Estilo da junção da linha da barra de escala
- Scalebar line cap style
Estilo da cobertura da linha
@@ -19426,11 +19155,6 @@ Tente uma resolução ou um tamanho de papel menor
Secondary fill color...
-
-
- Stroke color...
Cor do traço...
@@ -19440,37 +19164,37 @@ Tente uma resolução ou um tamanho de papel menor
Ellipse
Elipse
Rectangle
Retângulo
Triangle
Triângulo
- Shape style changed
Estilo do shape modificado
- Shape radius changed
Raio do shape modificado
- Shape type changed
Tipo do shape modificado
@@ -19881,107 +19605,107 @@ Tente uma resolução ou um tamanho de papel menor
QgsComposition
- Label added
Rótulo adicionado
- Map added
Mapa adicionado
- Arrow added
Seta adicionada
- Scale bar added
Barra de escala adicionada
- Shape added
Shape adicionado
- Picture added
Figura adicionada
- Legend added
Legenda adicionada
- Table added
Tabela adicionada
- Aligned items left
Itens alinhados à esquerda
- Aligned items horizontal center
Itens centralizados na horizontal
- Aligned items vertical center
Itens centralizados na vertical
- Aligned items right
Itens alinhados à direita
- Aligned items top
Itens alinhados pelo topo
- Aligned items bottom
Itens alinhados pela base
- Items locked
Items bloqueados
- Items unlocked
Items desbloqueados
- Item z-order changed
Ordem Z do item modificado
- Remove item group
Remover item do grupo
- Frame deleted
Moldura detectada
- Item deleted
Item excluído
- Multiframe removed
Multimoldura removida
@@ -20038,148 +19762,148 @@ Tente uma resolução ou um tamanho de papel menor
Landscape
Paisagem
Portrait
Retrato
Map %1
Mapa %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A1 (594x841 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Carta; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloide; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
Personalizado
@@ -20197,131 +19921,109 @@ Tente uma resolução ou um tamanho de papel menor
Papel e qualidade
- Presets
Predefinidos
- ...
- ...
-
-
- Width
Largura
- Height
Altura
- Units
Unidades
- Number of pages
Número de páginas
- Orientation
Orientação
- Export resolution
Exportar resolução
- Print as raster
Imprimir como raster
-
- Snap tolerance
- Tolerância da atração
-
-
- px
- px
-
Change...
Mudar...
- Page background
Página de Fundo
+ Grid
- Grade
+ Grade
- dpi
dpi
- World file on
Arquivo do Mundo em
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Afastamento da grade
- x:
x:
- y:
y:
+ Spacing
- Espaçamento
+ Espaçamento
+ Snap to alignments
- Ajustar aos alinhamentos
+ Ajustar aos alinhamentos
+ Tolerance
- Tolerância
+ Tolerância
@@ -21496,7 +21198,7 @@ e arquivo atual é [%3]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23235,7 +22937,7 @@ Deixar vazio para aplicar automaticamente o máximo valor.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Impossível definir coluna '%1' como coluna prévia.
@@ -23564,7 +23266,7 @@ Erro ao analisar:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23577,7 +23279,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24680,7 +24382,7 @@ MyForms.py deve estar no PYTHONPATH, .qgis/python, ou dentro do diretório do pr
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -25988,7 +25690,7 @@ Please reselect a valid file.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26940,17 +26642,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Símbolo
- Value
Valor
- Label
Rótulo
@@ -27043,41 +26745,41 @@ p, li { white-space: pre-wrap; }
Avançado
- Symbol levels...
Níveis de símbolos...
- Error
Erro
- There are no available color ramps. You can add them in Style Manager.
Não existem cor de rampas disponíveis. Você pode adicioná-las no Gerenciador de Estilos.
- The selected color ramp is not available.
A cor de rampa selecionada não está disponível.
- Warning
Atenção
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
Classificação por quebras naturais (Jenks) é de complexidade O(n2), sua classificação pode levar um tempo longo.
Pressione cancelar para abortar o calculo das quebras ou OK para continuar.
- Renderer creation has failed.
Criação de renderização falhou.
@@ -27261,10 +26963,7 @@ Pressione cancelar para abortar o calculo das quebras ou OK para continuar.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Você tem certeza que deseja excluir %n a camada selecionada?
- Você tem certeza que deseja excluir %n as camadas selecionadas?
-
+ Você tem certeza que deseja excluir %n a camada selecionada? Você tem certeza que deseja excluir %n as camadas selecionadas?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29020,7 +28719,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29059,7 +28758,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29133,7 +28832,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29899,10 +29598,7 @@ na liha %2 coluna %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Existe %n camada não-manuseável, que será perdida se você fechar agora.
- Existem %n camadas não-manuseáveis, que serão perdidas se você fechar agora.
-
+ Existe %n camada não-manuseável, que será perdida se você fechar agora. Existem %n camadas não-manuseáveis, que serão perdidas se você fechar agora.
@@ -30033,12 +29729,9 @@ Ajuda do QGIS
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Rede esgotou o tempo após %1 segundos de inatividade.
-Isto pode ser um problema em sua conexão ou no servidor WMS.
- A Rede esgotou o tempo após %n segundo(s) de inatividade.
-Isto pode ser um problema em sua conexão ou no servidor WMS.
-
+ Rede esgotou o tempo após %1 segundos de inatividade.
+Isto pode ser um problema em sua conexão ou no servidor WMS. A Rede esgotou o tempo após %n segundo(s) de inatividade.
+Isto pode ser um problema em sua conexão ou no servidor WMS.
@@ -31233,7 +30926,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Configurações de rótulo de camada
- Label this layer with
Rotular esta camada com
@@ -31313,22 +31006,22 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
...
...
@@ -31384,7 +31077,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Múltiplas linhas
- Automated placement settings (apply to all layers)
Configurações de posicionamento automatizado (aplicar a todas camadas)
@@ -31414,7 +31107,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Rendering
Renderizar
@@ -31502,7 +31195,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Alignment
Alinhamento
@@ -31539,7 +31232,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Repetir
- Discourage labels from covering features
Desencorajar rótulos de cobrir feições
@@ -31634,82 +31327,82 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Buffer
- Labels will not show if larger than this on screen
Rótulos não serão mostrados se maiores do que a tela
- px
px
- Data defined
Dado definido
- X
X
- Y
Y
- Coordinate
Coordenada
- Preserve data rotation values
Preservar valores de rotação de dados
- horizontal
horizontal
- vertical
vertical
- Label options
Opções de rótulo
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Valor < 0 representa uma escala próxima de 1:1, p.e. -10 = 10:1.<br>Valor de 0 desabilita o limite específico.
- Maximum
Máximo
- Pixel size-based visibility (labels in map units)
Tamanho do pixel baseado na visibilidade (rótulos na unidade do mapa)
- Labels will not show if smaller than this on screen
Rótulos não serão mostrados se menores do que a tela
- Minimum
Mínimo
@@ -31719,7 +31412,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
<
- Scale-based visibility
Visibilidade baseada na escala
@@ -31757,17 +31450,17 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Direção reversa
- Priority
Prioridade
- Low
Baixa
- High
Alta
@@ -31920,7 +31613,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Rotation
Rotação
@@ -31972,17 +31665,17 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Distância
- outside
fora do tamanho
- inside
dentro
- Maximum angle between curved characters
Ângulo máximo entre caracteres curvados
@@ -32088,62 +31781,62 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Unidades do símbolo
- Merge connected lines to avoid duplicate labels
Mesclar linhas conectadas para evitar rótulos duplicados
- Label every part of multi-part features
Rótulo sempre parte de feições multi-parte
- Feature options
Opções da feição
- Suppress labeling of features smaller than
Omitir rotulagem de feições menores que
- mm
mm
- Show all labels for this layer (including colliding labels)
Mostrar todos rótulos para esta camada (incluindo rótulos em colisão)
- Show upside-down labels
Mostrar rótulos de cabeça para baixo
- never
nunca
- when rotation defined
quando a rotação definida
- always
sempre
- Limit number of features to be labeled to
Limitar número de feições para serem rotuladas a
- Number of features sent to labeling engine, though not all may be labeled
Número de feições enviadas para rotulação, embora nem todas sejam rotulados
@@ -32153,17 +31846,17 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Posição
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Desmarque para rotular derivado de rotação no pino e NULL para fora do pino
- Always show
Mostrar sempre
- Show label
Mostrar rótulo
@@ -32179,12 +31872,12 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
QgsLayerTreeModel
- Double-click to view legend
Duplo clique para exibir a legenda
- following %1 items
not displayed
Os seguintes %1 itens
@@ -32242,12 +31935,12 @@ não serão exibidos
QgsLegendModel
- Group
Agrupar
- No Legend Available
Nenhuma Legenda Disponível
@@ -32475,18 +32168,18 @@ não serão exibidos
QgsMapCanvas
- canvas
tela
- Rendering
Renderização
- Canvas refresh: %1 ms
Recarregar tela: %1 ms
@@ -33671,10 +33364,7 @@ não serão exibidos
%n more
unread messages
-
- %n mais
- %n mais
-
+ %n mais %n mais
@@ -33810,7 +33500,7 @@ não serão exibidos
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Falha na conexão - O nome do Host não deve ter sido especificado.
@@ -33818,7 +33508,7 @@ não serão exibidos
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Falha na conexão - O nome da base de dados não deve ter sido especificado.
@@ -35368,10 +35058,7 @@ Informação de erro estendida:
Coordinate Reference System (%n available)
crs count
-
- Sistema de Referência de Coordenadas (%n disponível)
- Sistema de Referência de Coordenadas (%n disponíveis)
-
+ Sistema de Referência de Coordenadas (%n disponível) Sistema de Referência de Coordenadas (%n disponíveis)
Solid
Sólido
Dots
Pontos
Crosses
Cruzes
- Detected active locale on your system: %1
Idioma ativo detectado em seu sistema: %1
- To vertex
Ao vértice
- To segment
Ao segmento
- To vertex and segment
Ambos
- map units
unidades do mapa
- pixels
pixels
- Semi transparent circle
Círculo semi-transparente
- Cross
Cruz
- None
Nenhum
- QGIS files
Arquivos QGIS
- Off
Desligar
- QGIS
QGIS
- GEOS
GEOS
- Round
Arredondado
- Mitre
Pontiagudo
- Bevel
Chanfrado
- Save default project
Salvar projeto padrão
- You must set a default project
Você deve definir um projeto padrão
- Current project saved as default
Projeto atual salvo como padrão
- Error saving current project as default
Erro ao salvar projeto atual como padrão
- Choose a directory to store project template files
Escolha um diretório para armazenar arquivos de modelo de projeto
@@ -36497,105 +36184,105 @@ Rede sempre: sempre carregar da rede e não verificar se o cache tem uma entrada
Mostrar feições visíveis no mapa
- Choose project file to open at launch
Escolha o arquivo de projeto para abrir na inicialização
- Create Options - %1 Driver
Opção de Criação - Driver %1
- Create Options - pyramids
Opções de Criação - pirâmides
- Restore UI defaults
Restaurar UI padrão
- Are you sure to reset the UI to default (needs restart)?
Tem certeza que deseja redefinir a UI para o padrão (é necessário reiniciar)?
- Overwrite
Substituir
- If Undefined
Se não definido
- Unset
Desativado
- Prepend
Preceder
- Append
Acrescentar
- Choose a directory
Escolha uma pasta
- Enter scale
Entrar escala
- Scale denominator
Denominador da escala
- Load scales
Carregar escala
- XML files (*.xml *.XML)
Arquivos XML (*.xml *.XML)
- Save scales
Salvar escalas
- No Stretch
Sem extensão
- Stretch To MinMax
Estender para MinMax
- Stretch And Clip To MinMax
Estender e cortar para MinMax
- Clip To MinMax
Cortar para MinMax
@@ -36615,7 +36302,7 @@ Rede sempre: sempre carregar da rede e não verificar se o cache tem uma entrada
General
Geral
@@ -36798,7 +36485,7 @@ Rede sempre: sempre carregar da rede e não verificar se o cache tem uma entrada
...
...
@@ -36914,7 +36601,7 @@ Rede sempre: sempre carregar da rede e não verificar se o cache tem uma entrada
Remove
Remove
@@ -36922,7 +36609,7 @@ Rede sempre: sempre carregar da rede e não verificar se o cache tem uma entrada
Add
Adiciona
@@ -37182,22 +36869,7 @@ Rede sempre: sempre carregar da rede e não verificar se o cache tem uma entrada
Largura mínima de linha / contorno em milímetros.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Suprimir janela de formulário de atributo após a criação
@@ -37494,18 +37166,22 @@ Rede sempre: sempre carregar da rede e não verificar se o cache tem uma entrada
Cor...
+ Grid defaults
- Padrões da grade
+ Padrões da grade
+ Spacing
- Espaçamento
+ Espaçamento
mm
mm
@@ -37526,370 +37202,372 @@ Rede sempre: sempre carregar da rede e não verificar se o cache tem uma entrada
Snap tolerance
Tolerância da atração
+ Guide defaults
- Padrões das Guias
+ Padrões das Guias
- Feature creation
Criação de feições
- Validate geometries
Validar geometrias
- Reuse last entered attribute values
Reutilizar último valor de atributo inscrito
- Rubberband
Linha ao digitalizar
- Line color
Cor da linha
- Line width in pixels
Espessura da linha em pixels
- Line width
Espessura da linha
- Snapping
Atração
- Default snap mode
Modo de atração padrão
- Default snapping tolerance
Tolerância de atração padrão
- Search radius for vertex edits
Raio de busca para editar vértice
- map units
unidades do mapa
pixels
pixels
- Open snapping options in a dock window (QGIS restart required)
Abrir opções de ajuste em uma janela flutuante (será nescessário reiniciar o QGIS)
- Vertex markers
Marcadores de vértice
- Marker style
Estilo de marcadores
- Marker size
Tamanho do marcador
- Show markers only for selected features
Mostrar marcadores apenas para feições selecionadas
- Curve offset tool
Ferramenta de deslocamento da curva
- Miter limit
Limite da esquadria
- Join style
Estilo da união
- Quadrant segments
Segmentos do quadrante
- GDAL driver options
Opções de driver GDAL
- Edit Pyramids Options
Editar opções de Pirâmides
- Edit Create Options
Editar opções de criação
- GDAL drivers
Drivers GDAL
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
Em alguns casos mais de um driver GDAL pode ser usado para carregar o mesmo formato de raster. Use a lista abaixo para especificar qual usar.
- Name
Nome
- ext
ext
- Flags
Bandeiras
- Description
Descrição
- CRS for new layers
SRC para novas camadas
- Select...
Selecione...
- Use &project CRS
Usar SRC de &projeto
- Prompt for &CRS
Prompt para &SRC
- Use default CRS displa&yed below
Usar SRC padrão mos&trado abaixo
- When a new layer is created, or when a layer is loaded that has no CRS
Quando uma nova camada é criada ou carregada e não possui um SRC
- Default CRS for new projects
SRC padrão para novos projetos
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Habilitar automaticamente a reprojeção 'on the fly' se o SRC de uma nova camada adicionada diferir do SRC da camada(s) que já está presente. O SRC da camada(s) atual será usada.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Habilitar automaticamente a reprojeção 'on the fly' se as camadas tiverem diferentes SRCs
- Always start new projects with this CRS
Sempre iniciar novos projetos com este SRC
- Enable 'on the &fly' reprojection by default
Habilitar reprojeção 'on the fly' como padrão
- Don't enable 'on the fly' reprojection
Não habilite a reprojeção 'on the fly'
- Default datum transformations
Transformações padrão do Datum
- Source CRS
CRS Original
- Destination CRS
CRS Destino
- Source datum transform
Transformação Original do Datum
- Destination datum transform
Transformação Destino do Datum
- Ask for datum transformation when no default is defined
Pergunte sobre a transformação do datum quando um padrão não estiver definido
- Override system locale
Sobrepor idioma do sistema
- Locale to use instead
Escolha o código do idioma a ser usado
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Nota:</b> Habilitar / trocar a região requer reiniciar a aplicação
- Additional Info
Informação adicional
- Detected active locale on your system:
Região detectada no seu sistema:
- WMS search address
Buscar endereço WMS
- Timeout for network requests (ms)
Tempo esgotado para pedidos de rede (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Prazo de validade padrão para tiles WMS-C/WMTS (horas)
- Max retry in case of tile request errors
Número máximo de tentativas em caso de erro na requisção de tiles
- User-Agent
User-Agent
- Cache settings
Configurações do cache
- Directory
Pasta
- Size [KiB]
Tamanho [KiB]
- Clear
Limpar
- Use proxy for web access
Usar proxy para acessar a web
- Host
Máquina
- Port
Porta
- User
Usuário
- Leave this blank if no proxy username / password are required
Deixe este branco se não é requerido usuário ou senha para o proxy
- Password
Senha
- Proxy type
Tipo do proxy
- Exclude URLs (starting with)
Excluir URLs (iniciar com)
@@ -39864,7 +39542,7 @@ Erro: %2
O complemento desapareceu
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
O complemento parece ter sido instalado, mas não sei onde. Provavelmente, o pacote de complemento contém um nome de pasta errado.
Procure a lista de complementos instalados. Tenho quase certeza que você vai encontrar o complemento lá, mas eu simplesmente não posso determinar qual deles é. Isso também significa que não vou ser capaz de determinar se este complemento está instalado e informá-lo sobre atualizações disponíveis. No entanto, o complemento pode trabalhar. Entre em contato com o autor do complemento e comunique-o sobre esse problema.
@@ -40587,7 +40265,7 @@ Você precisa reiniciar o QGIS para recarregá-lo.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40605,7 +40283,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40623,7 +40301,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41484,156 +41162,156 @@ Escolha ignorar para continuar carregando sem as camadas não encontradas. Escol
QgsProjectProperties
- Layer
Camada
- Type
Tipo
- Identifiable
Identificável
- Vector
Vetor
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
Restrição ao sistema de coordenadas
- No coordinate systems selected. Disabling restriction.
Nenhum sistema de coordenadas selecionado. Desabilitando a restrição.
- Selection color
Seleção de cor
- Measure tool (CRS transformation: %1)
Ferramenta de medição (transformação de SRC: %1)
- Canvas units (CRS transformation: %1)
Unidades de tela (transformação SRC: %1)
+ OFF
Desligado
+ ON
Ligado
- CRS %1 was already selected
SRC %1 já foi selecionado
- Coordinate System Restrictions
Restrição ao Sistema de Coordenadas
- The current selection of coordinate systems will be lost.
Proceed?
O sistema de coordenadas atual será perdido.
Continuar?
- Select print composer
Selecionar compositor de impressão
- Composer Title
Título do compositor
- Select restricted layers and groups
Selecionar as camadas e grupos restritos
- Enter scale
Escala de entrada
- Scale denominator
Denominador da escala
- Load scales
Carregar escalas
- XML files (*.xml *.XML)
Arquivos XML (*.xml *.XML)
- Save scales
Salvar escalas
- Select a valid symbol
Selecione um símbolo válido
- Invalid symbol :
Símbolo inválido :
- Parameters:
Parâmetros:
+ Select %1 from pull-down menu to adjust radii
Selecione %1 a partir do menu suspenso para ajustar os raios
- Can only use ellipsoidal calculations when CRS transformation is enabled
Somente se pode usar cálculos elipsoidais quando a transformação de SRC está habilitada
@@ -41658,7 +41336,6 @@ Continuar?
Project title
Título do Projeto
@@ -41698,37 +41375,37 @@ Continuar?
Salvar caminhos
- Measure tool
Ferramenta de medida
- Semi-minor
Semi-eixo menor
- Semi-major
Semi-eixo maior
- Used when CRS transformation is turned off
Usado quando as transformações de SRC está desligada
- Canvas units
Unidades da tela
- Meters
Metros
- Feet
Pés
@@ -41760,98 +41437,98 @@ Continuar?
Servidor OWS
- Ellipsoid
(for distance calculations)
Elipsoide
(para cálculos de distância)
- Degree
Graus
- Degree display
Exibição dos graus
- Decimal degrees
Graus Decimais
- Degrees, Minutes
Graus, Minutos
- Degrees, Minutes, Seconds
Graus, Minutos, Segundos
- Precision
Precisão
- Automatically sets the number of decimal places in the mouse position display
Ajustar automaticamente o número de casas decimais na posição (geográfica) mostrada pelo mouse
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
O número de casas decimais que são usadas para mostrar a posição (geográfica) do mouse é automaticamente ajustado de forma a ser suficientemente precisa, dessa forma, ao mover o mouse em um pixel resulta em uma mudança na posição
- Automatic
Automático
- Sets the number of decimal places to use for the mouse position display
Ajusta o número de casas decimais que mostrarão a posição (geográfica) do mouse
- Manual
Manual
- The number of decimal places for the manual option
O número de casas decimais para a opção manual
- decimal places
casas decimais
- Project scales
Escalas do Projeto
- ...
...
- Enable 'on the fly' CRS transformation
Habilitar transformação SRC "on the fly"
@@ -41861,69 +41538,69 @@ Continuar?
Camadas identificáveis
- Project layers
Camadas do projeto
- Layer
Camada
- Type
Tipo
- Identifiable
Identificável
- Marker
Marcador
- Line
Linha
- Default symbols
Símbolos padrão
- Fill
Preenchimento
- Color Ramp
Escala de cor
- Transparency
Transparência
- %
%
- Style Manager
Gerenciador de Estilos
- Options
Opções
@@ -41933,170 +41610,165 @@ Continuar?
Relações
- Project file
- Arquivo de projeto
-
-
- Nautical miles
Milhas Náuticas
- Assign random colors to symbols
Atribuir cores aleatórias para os símbolos
- Service capabilities
Recursos do Serviço
- Person
Pessoal
- Title
Título
- Organization
Organização
- Online resource
Recurso on-line
- E-Mail
E-Mail
- Phone
Fone
- Abstract
Resumo
- Fees
Taxas
- Access constraints
Acesso reservado
- Keyword list
Lista de palavras-chave
- WMS capabilities
Recursos WMS
- Add geometry to feature response
Adicionar geometria a resposta da feição
- Min. X
Min. X
- Min. Y
Min. Y
- Max. X
Max. X
- Max. Y
Max. Y
- Use Current Canvas Extent
Usar a extensão da tela atual
- Used
Usado
- Exclude composers
Excluir compositores
- WFS capabilities
Recursos WFS
- WCS capabilities
Recursos do WCS
- Exclude layers
Excluir camadas
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
Qualidade para imagens JPEG (10: imagem menor - 100: melhor qualidade)
- Published
Publicado
- Update
Atualizar
- Insert
Inserir
- Delete
Excluir
- Unselect all
Desmarcar tudo
- Select all
Selecionar Tudo
@@ -42107,39 +41779,39 @@ Continuar?
Macros
- Advertised URL
URL informada
- Width
Largura
- Height
Altura
- Maximums for GetMap request
Requisição máxima para GetMap
- Advertised extent
Extensão informada
- CRS restrictions
Restrições de SRC
- Python macros
Macros Python
@@ -42253,10 +41925,7 @@ Devido ao seletor de projeção não estar em funcionamento...
The where clause returned %n row(s).
returned test rows
-
- A cláusula onde retornou %n linha.
- A cláusula onde retornou %n linhas.
-
+ A cláusula onde retornou %n linha. A cláusula onde retornou %n linhas.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42330,7 +41999,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42341,7 +42010,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42357,7 +42026,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -44021,7 +43690,7 @@ Clique no botão de ajuda para obter opções de criação válidos para este fo
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta nome="qrichtext" content="1" /><style type="text/css">
@@ -45100,10 +44769,7 @@ Desvio Padrão ×
Filter returned %n feature(s)
number of filtered features
-
- %1 feições filtrada(s)
- Filtro retornou %n feição(ões)
-
+ %1 feições filtrada(s) Filtro retornou %n feição(ões)
@@ -45791,10 +45457,7 @@ Desvio Padrão ×
Found %n matching feature(s).
test result
-
- Encontradas %n feições correspondente.
- Encontradas %n feições correspondente(s).
-
+ Encontradas %n feições correspondente. Encontradas %n feições correspondente(s).
Validation finished (%n error(s) found).
number of geometry errors
-
- Validação concluída (%n erro encontrado).
- Validação concluída (%n erros encontrados).
-
+ Validação concluída (%n erro encontrado). Validação concluída (%n erros encontrados).
%n selected geometries
selected geometries
-
- %n geometria selecionada
- %n geometrias selecionadas
-
+ %n geometria selecionada %n geometrias selecionadas
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47346,7 +47003,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47959,8 +47616,8 @@ Você deseja substituir a [%2] relação?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47997,124 +47654,152 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Falha ao carregar a interface
+ Falha ao carregar a interface
+ Failed to connect to database
- Falha ao conectar com a base de dados
+ Falha ao conectar com a base de dados
+ A connection to the SQL Anywhere database cannot be established.
- Uma conexão com a base de dados SQL Anywhere não pode ser estabelecida.
+ Uma conexão com a base de dados SQL Anywhere não pode ser estabelecida.
+ No suitable key column
- Nenhuma coluna chave apropriada
+ Nenhuma coluna chave apropriada
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- A fonte da relação %1 não possui coluna apropriada para usar como uma chave única.
+ A fonte da relação %1 não possui coluna apropriada para usar como uma chave única.
O QGIS requer que a relação tenha uma coluna de número inteiro menor que 32 bits contendo valores únicos.
+ Error loading attributes
- Erro ao carregar atributos
+ Erro ao carregar atributos
+ Ambiguous field!
- Campo ambíguo!
+ Campo ambíguo!
+ Duplicate field %1 found
- Campo duplicado %1 encontrado
+ Campo duplicado %1 encontrado
+ Read attempt on an invalid SqlAnywhere data source
- Tentativa de leitura em uma fonte de dados SqlAnywhere inválida
+ Tentativa de leitura em uma fonte de dados SqlAnywhere inválida
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Erro ao inserir feições
+ Erro ao inserir feições
+ Error deleting features
- Erro ao excluir feições
+ Erro ao excluir feições
+ Error adding attributes
- Erro ao adicionar atributos
+ Erro ao adicionar atributos
+ Error deleting attributes
- Erro ao excluir atributos
+ Erro ao excluir atributos
+ Attribute not found
- Atributos não encontrados
+ Atributos não encontrados
+ Error updating attributes
- Erro ao atualizar atributos
+ Erro ao atualizar atributos
+ Error updating features
- Erro ao atualizar feições
+ Erro ao atualizar feições
+ Error verifying geometry column %1
- Erro ao verificar geometria de coluna %1
+ Erro ao verificar geometria de coluna %1
+ Unknown geometry type
- Tipo de geometria desconhecida
+ Tipo de geometria desconhecida
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- Coluna %1 tem um tipo de geometria de %2, a qual o QGIS não suporta atualmente.
+ Coluna %1 tem um tipo de geometria de %2, a qual o QGIS não suporta atualmente.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- Coluna %1 não é restrita a um simples SRID, o qual o QGIS requer.
+ Coluna %1 não é restrita a um simples SRID, o qual o QGIS requer.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Devido ao QGIS suportar apenas dados planos, o provedor de dados SQL Anywhere transformará os dados para uma projeção planar compatível (SRID=%1).
+ Devido ao QGIS suportar apenas dados planos, o provedor de dados SQL Anywhere transformará os dados para uma projeção planar compatível (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Devido ao QGIS suportar apenas dados planos e uma projeção plana não compatível ter sido encontrada, o provedor de dados SQL Anywhere tentará transformar os dados para projeção planar WGS 84 (SRID=%1).
+ Devido ao QGIS suportar apenas dados planos e uma projeção plana não compatível ter sido encontrada, o provedor de dados SQL Anywhere tentará transformar os dados para projeção planar WGS 84 (SRID=%1).
+ Mixed Spatial Reference Systems
- Sistema de referência espacial misto
+ Sistema de referência espacial misto
+ Error checking database ReadOnly property
- Erro ao verificar base de dados com propriedade 'Apenas Leitura'
+ Erro ao verificar base de dados com propriedade 'Apenas Leitura'
+ Error loading SRS definition
- Erro ao carregar definição SRC
+ Erro ao carregar definição SRC
+ Limited Support of Round Earth SRS
- Suporte Limitado do SRC "Round Earth"
+ Suporte Limitado do SRC "Round Earth"
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- Coluna %1 (%2) contém geometrias pertencentes a um sistema de referência espacial "round earth" (SRID=%3). %4
+ Coluna %1 (%2) contém geometrias pertencentes a um sistema de referência espacial "round earth" (SRID=%3). %4
Atualizações para os valores de geometria serão desabilitados e a performance da pesquisa poderá ser ruim, porque não serão utilizados índices espaciais. Para melhorar a performance, considere criar um índice espacial em uma nova coluna (possivelmente existente) contendo uma projeção plana destas geometrias. Para ajuda, cite as descrições de métodos de ST_SRID(INT) e ST_Transform(INT) na documentação SQL Anywhere.
@@ -48249,14 +47934,14 @@ Atualizações para os valores de geometria serão desabilitados e a performance
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Símbolo com nome '%1' já existe.
Substituir?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Inclinação com nome '%1' já existe.
Substituir?
@@ -49388,7 +49073,7 @@ Houve um problema com o seu banco de dados de simbologias.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50164,37 +49849,25 @@ Foi erro: %2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- SUCESSO: %n atributo excluído.
- SUCESSO: %n atributos excluídos.
-
+ SUCESSO: %n atributo excluído. SUCESSO: %n atributos excluídos.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- ERRO: %n atributo não excluído.
- ERRO: %n atributos não excluídos.
-
+ ERRO: %n atributo não excluído. ERRO: %n atributos não excluídos.
SUCCESS: %n attribute(s) added.
added attributes count
-
- SUCESSO: %n atributo adicionado.
- SUCESSO: %n atributos adicionados.
-
+ SUCESSO: %n atributo adicionado. SUCESSO: %n atributos adicionados.
ERROR: %n new attribute(s) not added
not added attributes count
-
- ERRO: %n novo atributo não adicionado
- ERRO: %n novos atributos não adicionados
-
+ ERRO: %n novo atributo não adicionado ERRO: %n novos atributos não adicionados
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- SUCESSO: %n valor de atributo modificados.
- SUCESSO: %n valores de atributos modificados.
-
+ SUCESSO: %n valor de atributo modificados. SUCESSO: %n valores de atributos modificados.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- ERRO: %n mudança de valor de atributo não aplicada.
- ERRO: %n mudanças de valor de atributo não aplicada.
-
+ ERRO: %n mudança de valor de atributo não aplicada. ERRO: %n mudanças de valor de atributo não aplicada.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- SUCESSO: %n feição excluída.
- SUCESSO: %n feições excluídas.
-
+ SUCESSO: %n feição excluída. SUCESSO: %n feições excluídas.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- ERRO: %n feição não excluída.
- ERRO: %n feições não excluídas.
-
+ ERRO: %n feição não excluída. ERRO: %n feições não excluídas.
SUCCESS: %n feature(s) added.
added features count
-
- SUCESSO: %n feição adicionada.
- SUCESSO: %n feições adicionadas.
-
+ SUCESSO: %n feição adicionada. SUCESSO: %n feições adicionadas.
ERROR: %n feature(s) not added.
not added features count
-
- ERRO: %n feição não adicionada.
- ERRO: %n feições não adicionadas.
-
+ ERRO: %n feição não adicionada. ERRO: %n feições não adicionadas.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- ERRO: %n feição não adicionada - o provedor não suporta adição de feições.
- ERRO: %n feições não adicionadas - o provedor não suporta adição de feições.
-
+ ERRO: %n feição não adicionada - o provedor não suporta adição de feições. ERRO: %n feições não adicionadas - o provedor não suporta adição de feições.
SUCCESS: %n geometries were changed.
changed geometries count
-
- SUCESSO: %n geometria foram modificada.
- SUCESSO: %n geometrias foram modificadas.
-
+ SUCESSO: %n geometria foram modificada. SUCESSO: %n geometrias foram modificadas.
ERROR: %n geometries not changed.
not changed geometries count
-
- ERRO: %n geometria não modificada.
- ERRO: %n geometrias não modificadas.
-
+ ERRO: %n geometria não modificada. ERRO: %n geometrias não modificadas.
Options (%n coordinate reference systems available)
crs count
-
- Opções (%n sistema de referência de coordenadas disponível)
- Opções (%n sistema de referência de coordenadas disponíveis)
-
+ Opções (%n sistema de referência de coordenadas disponível) Opções (%n sistema de referência de coordenadas disponíveis)
Coordinate Reference System (%n available)
crs count
-
- Sistema de Referência de Coordenadas (%n disponível)
- Sistema de Referência de Coordenadas (%n disponíveis)
-
+ Sistema de Referência de Coordenadas (%n disponível) Sistema de Referência de Coordenadas (%n disponíveis)
%n Layer(s) selected
selected layer count
-
- %n Camada selecionada
- %n Camadas selecionadas
-
+ %n Camada selecionada %n Camadas selecionadas
(and %n more)
crs
-
- (e %n mais)
- (e %n mais)
-
+ (e %n mais) (e %n mais)
%n tile requests in background
tile request count
-
- %n pedido de 'tile' no fundo
- %n pedidos de 'tile' no fundo
-
+ %n pedido de 'tile' no fundo %n pedidos de 'tile' no fundo
, %n cache hits
tile cache hits
-
- , %n cache hits
- , %n acessos ao cache
-
+ , %n cache hits , %n acessos ao cache
, %n cache misses.
tile cache missed
-
- , %n cache de perdas.
- , %n cache de perdas.
-
+ , %n cache de perdas. , %n cache de perdas.
, %n errors.
errors
-
- , %n erro.
- , %n erros.
-
+ , %n erro. , %n erros.
(and %n more)
crs
-
- (e %n mais)
- (e %n mais)
-
+ (e %n mais) (e %n mais)
%n missing row(s)
-
- %n linha faltando
- %n linha(s) faltando
-
+ %n linha faltando %n linha(s) faltando
%n missing column(s)
-
- %n coluna faltando
- %n coluna(s) faltando
-
+ %n coluna faltando %n coluna(s) faltando
%n tile requests in background
tile request count
-
- %n 'tile' solicitado no fundo
- %n 'tile' solicitados no fundo
-
+ %n 'tile' solicitado no fundo %n 'tile' solicitados no fundo
, %n cache hits
tile cache hits
-
- , %n acesso ao cache
- , %n acessos ao cache
-
+ , %n acesso ao cache , %n acessos ao cache
, %n cache misses.
tile cache missed
-
- , %n erro de cache.
- , %n erros de cache.
-
+ , %n erro de cache. , %n erros de cache.
, %n errors.
errors
-
- , %n erro.
- , %n erros.
-
+ , %n erro. , %n erros.
SaDbTableModel
+ Schema
- Esquema
+ Esquema
+ Table
- Tabela
+ Tabela
+ Type
- Tipo
+ Tipo
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpolação de linha
+ Interpolação de linha
+ Geometry column
- Geometria da coluna
+ Geometria da coluna
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Salvar conexão
+ Salvar conexão
+ Should the existing connection %1 be overwritten?
- Devo substituir a conexão %1 existente?
+ Devo substituir a conexão %1 existente?
+ Failed to load interface
- Falha ao carregar a interface
+ Falha ao carregar a interface
+ Test connection
- Testar conexão
+ Testar conexão
+ Connection to %1 was successful
- Conexão com %1 foi concluída
+ Conexão com %1 foi concluída
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Conexão falhou - Verifique configurações e tente novamente.
+ Conexão falhou - Verifique configurações e tente novamente.
Código de erro SQL Anywhere: %1
Descrição: %2
@@ -53598,276 +53213,348 @@ Descrição: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Criar uma nova conexão SQL Anyqhere
+ Criar uma nova conexão SQL Anyqhere
+ Connection Information
- Informação da Conexão
+ Informação da Conexão
+ Name
- Nome
+ Nome
+ Host
- Host
+ Host
+ Port
- Porta
+ Porta
+ Server
- Servidor
+ Servidor
+ Database
- Base de Dados
+ Base de Dados
+ Connection Parameters
- Parâmetros da conexão
+ Parâmetros da conexão
+ Username
- Usuário
+ Usuário
+ Password
- Senha
+ Senha
+ Name of the new connection
- Nome da nova conexão
+ Nome da nova conexão
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Nome ou endereço de IP do computador que hospeda o servidor de dados (deixe em brando para conexões locais)
+ Nome ou endereço de IP do computador que hospeda o servidor de dados (deixe em brando para conexões locais)
+ Port number used by the database server (leave blank for default 2638)
- Número da porta usada pelo servidor da base de dados (deixe em brando para o padrão 2638)
+ Número da porta usada pelo servidor da base de dados (deixe em brando para o padrão 2638)
+ Name of the database server (leave blank for default server on host)
- Nome do servidor da base de dados (deixe em branco para o servidor padrão no host)
+ Nome do servidor da base de dados (deixe em branco para o servidor padrão no host)
+ Name of the database (leave blank for default database on server)
- Nome da base de dados (deixe em branco para base de dados padrão no servidor)
+ Nome da base de dados (deixe em branco para base de dados padrão no servidor)
+ Additional connection parameters
- Parâmetros adicionais de conexão
+ Parâmetros adicionais de conexão
+ Database username
- Usuário da base de dados
+ Usuário da base de dados
+ Database password
- Senha da base de dados
+ Senha da base de dados
+ Save the connection username in the registry
- Salva o nome de usuário no registro
+ Salva o nome de usuário no registro
+ Save Username
- Salvar nome do usuário
+ Salvar nome do usuário
+ &Test Connect
- &Testar Conexão
+ &Testar Conexão
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Salva a senha de conexão no resgistro (ALERTA: NÃO SEGURO)
+ Salva a senha de conexão no resgistro (ALERTA: NÃO SEGURO)
+ Save Password
- Salvar Senha
+ Salvar Senha
+ Encrypt packets using simple encryption
- Criptografar pacotes usando criptografia simples
+ Criptografar pacotes usando criptografia simples
+ Simple Encryption
- Criptografia simples
+ Criptografia simples
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Utilizar estimativas para determinadas propriedades da camada, tais como a cardinalidade, extensão, etc. (melhora performance)
+ Utilizar estimativas para determinadas propriedades da camada, tais como a cardinalidade, extensão, etc. (melhora performance)
+ Estimate table metadata
- Estimar tabela de metadados
+ Estimar tabela de metadados
+ Search for geometry columns in tables owned by other users
- Buscar por geometrias de colunas em tabela utilizadas por outros usuários
+ Buscar por geometrias de colunas em tabela utilizadas por outros usuários
+ Search other users' tables
- Buscar outras tabelas de usuários
+ Buscar outras tabelas de usuários
SaSourceSelect
+ &Add
- &Adicionar
+ &Adicionar
+ &Set Filter
- &Definir Filtro
+ &Definir Filtro
+ Wildcard
- Coringa
+ Coringa
+ RegExp
- RegExp
+ RegExp
+ All
- Tudo
+ Tudo
+ Schema
- Esquema
+ Esquema
+ Table
- Tabela
+ Tabela
+ Type
- Tipo
+ Tipo
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretação em Linha
+ Interpretação em Linha
+ Geometry column
- Geometria da coluna
+ Geometria da coluna
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Você quer realmente remover a conexão %1 e todas as configurações associadas?
+ Você quer realmente remover a conexão %1 e todas as configurações associadas?
+ Confirm Delete
- Confirmar exclusão
+ Confirmar exclusão
+ Select Table
- Selecionar Tabela
+ Selecionar Tabela
+ You must select a table in order to add a layer.
- Você deve selecionar uma tabela para poder adicionar uma camada.
+ Você deve selecionar uma tabela para poder adicionar uma camada.
+ Failed to load interface
- Falha ao carregar interface
+ Falha ao carregar interface
+ Connection failed
- A conexão Falhou
+ A conexão Falhou
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Conexão com a base de dados %1 falhou. Verifique as configurações e tente novamente.
+ Conexão com a base de dados %1 falhou. Verifique as configurações e tente novamente.
Erro de código SQL Anywhere: %2
Descrição: %3
+ No accessible tables found
- Não foram encontradas tabelas acessíveis
+ Não foram encontradas tabelas acessíveis
+ Database connection was successful, but no tables containing geometry columns were %1.
- Conexão com a base de dados estabelecida, mas nenhuma tabela contendo colunas de geometria foram %1.
+ Conexão com a base de dados estabelecida, mas nenhuma tabela contendo colunas de geometria foram %1.
+ found
- encontrados
+ encontrados
+ found in your schema
- encontrados no seu esquema
+ encontrados no seu esquema
SaSourceSelectBase
+ Add SQL Anywhere layer
- Adicionar camada SQL Anywhere
+ Adicionar camada SQL Anywhere
+ SQL Anywhere Connections
- Conexões SQL Anywhere
+ Conexões SQL Anywhere
+ Delete
- Excluir
+ Excluir
+ Edit
- Editar
+ Editar
+ New
- Novo
+ Novo
+ Connect
- Conectar
+ Conectar
+ Search options
- Opções de busca
+ Opções de busca
+ Search
- Buscar
+ Buscar
+ Search mode
- Modo de Busca
+ Modo de Busca
+ Search in columns
- Procurar nas colunas
+ Procurar nas colunas
SaveAsPythonScriptAction
I/O error
- Erro de I/O
+ Erro de I/O
Unable to save edits. Reason:
%s
- Não é possível salvar edições. Razão:
+ Não é possível salvar edições. Razão:
%s
@@ -54202,20 +53889,24 @@ Descrição: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Adicionar camada SQL Anywhere...
+ Adicionar camada SQL Anywhere...
+ Store vector layers within a SQL Anywhere database
- Armazena camadas vetoriais dentro de uma base de dados SQL Anywhere
+ Armazena camadas vetoriais dentro de uma base de dados SQL Anywhere
+ Invalid Layer
- Camada Inválida
+ Camada Inválida
+ %1 is an invalid layer and cannot be loaded.
- %1 é uma camada inválida e não pode ser carregada.
+ %1 é uma camada inválida e não pode ser carregada.
@@ -55553,7 +55244,7 @@ Execute verificação de topologia novamente.
context_help
- <h3>Database connection</h3>
<h3>Conexão à base de dados</h3>
@@ -55775,7 +55466,7 @@ que são descritos e ilustradis na <a href="http://en.wikipedia.org/wiki
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55785,7 +55476,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55837,7 +55528,7 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
<h3>Definição personalizada do Sistema de Referência de Coordenadas (SRC)</h3>
Se o QGIS não estabelecer o SRC, você pode definir um SRC personalizado. <p>
@@ -55870,7 +55561,7 @@ Definir um SRC no QGIS requer um bom conhecimento da biblioteca de projeção Pr
<table>
<tr>
<td>
- <p align='justify'>
+ <p align='justify'>
The QGIS Python Console is an interactive shell for the python command executions.
It also has a python file editor that allows you to edit and save your python scripts.
Both console and editor are based on PyQScintilla2 package.<br>
@@ -55926,7 +55617,7 @@ Definir um SRC no QGIS requer um bom conhecimento da biblioteca de projeção Pr
</tr>
</table>
<b><i>Toolbar:</i></b>
- <table width="100%" id='toolbarConsole'>
+ <table width="100%" id='toolbarConsole'>
<tr>
<td><img src="qrc:/images/themes/default/console/iconClearConsole.png" /></td>
<td colspan="2">Clear python console</td>
@@ -56021,8 +55712,8 @@ that will be automatically deleted after running.</li>
<br>
<li><label>Using prepared APIs file:</label> If checked the *.pap file will be used for code completion. To generate a prepared APIs file you have to load least an *.api file and then compile it by clicking on <label>Compile Apis...</label> button.</li>
</ul>
-<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
- <b>Note:</b> To save the state of console's widgets you have to close the Python Console
+<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
+ <b>Note:</b> To save the state of console's widgets you have to close the Python Console
from the close button. This allows you to save the geometry to be restored to the next start.
</p>
@@ -56207,7 +55898,7 @@ This dialog allows you to define the settings for a connection to a Oracle datab
<li> <label>Only look in meta data table</label> Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.
-<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
+<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56222,7 +55913,7 @@ the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied. The table
geometry is determined from the first 100 non-null geometry rows in the table.
<li> <label>Only existing geometry types</label> Only list the existing
-geometry types and don't offer to add others.
+geometry types and don't offer to add others.
</ul>
@@ -56405,10 +56096,10 @@ The field calculator allows you to update fields with expressions.
</td>
<td>value of field <tt>column_name</tt></td>
</tr>
-<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
+<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
<tr><td><tt>number</tt></td><td>number</td></tr>
<tr><td>NULL</td><td>null value</td></tr>
-<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
+<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
<tr><td>ln(<tt>a</tt>)</td><td>natural log (i.e. base e) of <tt>a</tt></td></tr>
<tr><td>log10(<tt>a</tt>)</td><td>log base 10 of <tt>a</tt></td></tr>
<tr><td>log(<tt>a</tt>,<tt>b</tt>)</td><td>log base <tt>b</tt> of <tt>a</tt></td></tr>
@@ -56536,8 +56227,8 @@ Draws a scale bar on the map.
<p>
You can control the style and placement, as well as the labeling of the bar.
QGIS only supports displaying the scale in the same units as your map frame. So
-if the units of your layers are in meters, you can't create a scale bar in
-feet. Likewise if you are using decimal degrees, you can't create a scale bar
+if the units of your layers are in meters, you can't create a scale bar in
+feet. Likewise if you are using decimal degrees, you can't create a scale bar
to display distance in meters.</p> <p>
To add a scale bar:
<ol>
@@ -56595,7 +56286,7 @@ This dialog allows you to define the settings for a connection to a PostgreSQL d
<li> <label>Only look in the geometry_columns table</label> Indicates that only "listed" geometry columns should be used - opposed to scanning all tables for geometry columns.
-<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
+<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56855,8 +56546,8 @@ To avoid digitizing all vertices of the common boundary select <label>Avoi
<a name="crs">
<h4>Coordinate Reference System (CRS) Tab</h4>
</a>
-The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
-<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
+The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
+<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
<p>You can find a coordinate system by entering its name, EPSG code or the QGIS ID and clicking the <label>Find</label> button.
<p>The list of recently used coordinate systems will be available on the bottom for quick access.
@@ -57294,7 +56985,7 @@ Para excluir um favorito do diálogo de Favoritos, clique nele e depois no botã
<p><label>Topology tolerance</label> - the distance in units of the project. If the distance of two points falls short the topological tolerance, they are considered to be the vertex. A topological tolerance value greater than zero slows down the plugin, but you can use not ideal data sources.</p>
<h5>Note</h5>
-<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
+<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
<a name="LayerSettings">
<h4>Transport layer settings</h4>
@@ -57435,6 +57126,7 @@ Este é usualmente mais rápido do que expressões genéricas no QGIS, mas é, a
+ <h3>Create a New SQL Anywhere Connection</h3>
This dialog allows you to define the settings for a connection to a
SQL Anywhere database.
@@ -57463,11 +57155,11 @@ SQL Anywhere database.
<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
-<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
</ul>
- <h3>Criar uma Nova Conecção SQL Anywhere</h3>
+ <h3>Criar uma Nova Conecção SQL Anywhere</h3>
Esta caixa de diálogo permite que você defina as configurações para uma conexão com o
SQL Anywhere.
<p>
@@ -57514,7 +57206,7 @@ SQL Anywhere.
The open vector layer dialog is used to add vector data to the QGIS map view. Vector data are spatial data described using geometries of points, lines and polygons (enclosed areas).</p>
QGIS supports vector data in a number of formats, including those supported by the OGR library data provider plugin, such as ESRI shape files, MapInfo MIF (interchange format) and MapInfo TAB (native format).</p>
QGIS supports PostGIS layers in a PostgreSQL database and SpatiaLite layers. Support for additional data types (eg. delimited text) is provided by additional data provider plugins. A list of OGR supported vector formats can be found in Appendix A.1 of the User Guide.</p>
-Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
+Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
<h3>Diálogo de Abertura de Camada Vetorial</h3>
@@ -57603,10 +57295,10 @@ It is possible to check how often QGIS will download the list and update informa
from the available repositories.
</p>
<p>
-By checking the 'Show experimental plugins' checkbox, all plugins will be shown
-in the lists, even the ones that are considered 'experimental' by the author.
+By checking the 'Show experimental plugins' checkbox, all plugins will be shown
+in the lists, even the ones that are considered 'experimental' by the author.
-<table border=1 width='95%' align='center'><tr><td>
+<table border=1 width='95%' align='center'><tr><td>
Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
</td></tr></table>
@@ -57769,7 +57461,7 @@ Define placement algorithm for labels. Choose between <label>central point
In the <label>Digitizing</label> tab you can define settings for digitizing line width and color.
<h5>Snapping</h5>
Here you can define a general, project wide snapping tolerance. <p>
-You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
+You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
A layer based snapping tolerance can be defined by choosing <label>Settings</label> (or <label>File</label>) > <label>Project Properties...</label>. In the <label>General</label> tab, section <label>Digitize</label> you can click on <label>Snapping options...</label> to enable and adjust snapping mode and tolerance on a layer basis.
<h5>Vertex markers</h5>
You can define marker style as <label>Semi transparent circle</label>, <label>Cross</label> or <label>None</label> and size; you can also set showing markers only for selected features.
@@ -57892,6 +57584,7 @@ Nesta seção você pode ver a lista e atributos. Para excluir um deles, clique
+ <h3>Add SQL Anywhere Tables</h3>
This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
<p>
@@ -57930,7 +57623,7 @@ To filter a layer before adding it to the map, either double click on its name o
</a>
Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
- <h3>AUXILIE A TRADUZIR ESTA AJUDA POR CONTEXTO... TORNE-SE UM COLABORADOR DO QGIS!</h3>
+ <h3>AUXILIE A TRADUZIR ESTA AJUDA POR CONTEXTO... TORNE-SE UM COLABORADOR DO QGIS!</h3>
<h3>Adicionar Tabelas SQL Anywhere </h3>
Permite adicionar camadas, com colunas de geometria, SQL Anywhere ao projeto QGIS.
<p>
@@ -58110,7 +57803,7 @@ It is safer to use an explicit coding if the QGIS project needs to be portable.
or degrees/minutes. QGIS is quite permissive in its interpretation of degrees/minutes/seconds.
A valid DMS coordinate will contain three numeric fields with an optional hemisphere prefix or suffix
(N, E, or + are positive, S, W, or - are negative). Additional non numeric characters are
- generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
+ generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
</li>
</ul>
<p>For well known text geometry the following options apply:</p>
@@ -58160,8 +57853,8 @@ are escaped.</p>
(that is, to stop it being treated as a new line, delimiter, or quote character).
</p>
<p>Escape characters that are also quote characters have much more limited effect. They only apply within quotes and only escape themselves. For example, if
-<tt>'</tt> is a quote and escape character, then the string
-<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
+<tt>'</tt> is a quote and escape character, then the string
+<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
</p>
@@ -58946,7 +58639,7 @@ Para suporte envie um email para scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -59714,7 +59407,7 @@ O complemento não será habilitado.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -59730,9 +59423,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
<h3>Função week()</h3>
@@ -59756,7 +59449,7 @@ a partir de um <code>Interval</code>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -59781,7 +59474,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
@@ -59816,7 +59509,7 @@ END
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -59830,7 +59523,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
<h3>Função right()</h3>
@@ -59849,7 +59542,7 @@ Retorna uma subsequência de caracteres que contém o <i> n </i> car
<code>right ('Hello World', 5) → 'World'</code><br>
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -59858,7 +59551,7 @@ This group contains functions for manipulating colors
Este grupo contém funções para manipular cores
- <h3>length() function</h3>
Returns the length of a string.
@@ -59871,7 +59564,7 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
<h3>função length()</h3>
Retorna o comprimento de uma cadeia de texto.
@@ -59889,7 +59582,7 @@ length('OLÁ') → 5</p>
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -59902,7 +59595,7 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
<h3>Função upper()</h3>
Converte uma sequência de caracteres em letras maiúsculas.
@@ -59919,9 +59612,9 @@ Converte uma sequência de caracteres em letras maiúsculas.
upper('hello WOrld') → 'HELLO WORLD'</p>
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -59931,8 +59624,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
<h3>função bbox</h3>
Retorna 1 se as geometrias espacialmente cruzam a caixa delimitadora definida e 0 se não.
@@ -59953,7 +59646,7 @@ b → geometria
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -59967,7 +59660,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
<h3>função left()</h3>
@@ -59988,7 +59681,7 @@ Retorna a sub cadeia de texto que contém <i>n</i> caracteres à esq
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -60015,7 +59708,7 @@ Nota: Esta função só está disponível em alguns contextos e será 0 caso con
<code>$scale → 10000</code><br>
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -60047,9 +59740,9 @@ Arredonda um número para cima.
<code>ceil(-4.9) → -4</code><br>
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -60060,7 +59753,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
<h3>função toreal()</h3>
Converte uma cadeia de texto para um número real. O valor não muda quando não for possível converter para real (ex. '123.56asd' é inválido). Os números são arredondados após guardar as alterações se a precisão dor mais pequena que o resultado da conversão.
@@ -60078,7 +59771,7 @@ toreal('123.45') → 123.45</p>
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -60104,7 +59797,7 @@ Recupera uma coordenada x de uma seleção atual
<pre>xat(1) → 5</pre>
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -60131,14 +59824,14 @@ Nenhum
<pre>$numpages → 42</pre>
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -60147,8 +59840,8 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
<h3>função strpos()</h3>
Retorna o índice de uma expressão numa cadeia de texto.
@@ -60171,7 +59864,7 @@ strpos('HELLO WORLD','ADEUS') → -1<br>
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -60208,7 +59901,7 @@ Esta função recebe dois argumentos.
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -60245,7 +59938,7 @@ None
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -60277,7 +59970,7 @@ None
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60305,7 +59998,7 @@ geom → a geometry
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -60337,7 +60030,7 @@ Arredonda um número para baixo.
<code>floor(-4.9) → -5</code><br>
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60365,9 +60058,9 @@ geom → a geometry
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -60378,7 +60071,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
<h3>Função toint()</h3>
Converte uma sequência de caracteres em um número inteiro. Nada mudou se um valor não pode ser convertido para inteiro (por exemplo, '123asd 'é inválido).
@@ -60395,7 +60088,7 @@ Converte uma sequência de caracteres em um número inteiro. Nada mudou se um va
toint('123') → 123</p>
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -60421,7 +60114,7 @@ Recupera a coordenada y da seleção atual
<pre>yat(1) → 5</pre>
- <h3>tostring() function</h3>
Converts a number to string.
@@ -60434,7 +60127,7 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
<h3>Função tostring()</h3>
Converte um número em uma sequência de caracteres.
@@ -60451,7 +60144,7 @@ Converte um número em uma sequência de caracteres.
tostring(123) → '123'</p>
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -60480,7 +60173,7 @@ Nenhum
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -60514,7 +60207,7 @@ Retorna o arco tangente de um par y/x usando sinais dos dois
atan2(1.0, 1.732) → 0.523611477769969</p>
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -60542,7 +60235,7 @@ Retorna o seno de um ângulo.
sin(1.571) → 0.999999682931835</p>
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -60558,9 +60251,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
<h3>função month()</h3>
@@ -60613,7 +60306,7 @@ Nenhum
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -60629,9 +60322,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
<h3>função day()</h3>
@@ -60656,12 +60349,12 @@ de um <code>Intervalo</code>
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -60685,7 +60378,7 @@ Converte uma string em um tipo de dado QT.
<code>todate('2012-05-04') → 2012-05-04</code><br>
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60702,7 +60395,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
<h3>função lpad()</h3>
Retorna uma string fornecendo largura confortável
@@ -60727,7 +60420,7 @@ usa o caractere de preenchimento.
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -60755,14 +60448,14 @@ Retorna o arcocosseno de um valor em radianos.
acos(0.5) → 1.0471975511966</p>
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60776,7 +60469,7 @@ O carregamentodo dos valores de campo a partir de camadas WFS não é suportado,
</p>
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -60812,7 +60505,7 @@ Esta função recebe dois argumentos.
<code>log(0.5, 32) → -5</code><br>
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -60820,14 +60513,14 @@ This group contains functions that operate on geometry objects e.g length, area.
Este grupo contém funções que operam nos objetos de geometria como por exemplo comprimento, área.
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60842,7 +60535,7 @@ O carregamentodo dos valores de campo a partir de camadas WFS não é suportado,
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -60869,7 +60562,7 @@ Nenhum
<pre>$page → 2</pre>
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -60897,7 +60590,7 @@ Retorna o exponencial de um valor.
exp(1.0) → 2.71828182845905</p>
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60914,7 +60607,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
<h3>função rpad()</h3>
@@ -60941,7 +60634,7 @@ usando o caractere de preenchimento.
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -60985,7 +60678,7 @@ use <code>round(decimal)</code> para arrendondar ao próximo inteiro
- <h3>$now function</h3>
Returns the current date and time
@@ -61013,7 +60706,7 @@ None
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -61028,7 +60721,7 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
<h3>função color_hsl()</h3>
Retorna uma representação de seqüência de caracteres de cor com base em seus atributos de matiz, saturação e luminosidade
@@ -61048,7 +60741,7 @@ Retorna uma representação de seqüência de caracteres de cor com base em seus
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -61061,8 +60754,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -61109,7 +60802,7 @@ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -61121,7 +60814,7 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
<h3>função convexHull</h3>
Retorna a fronteira convexo de uma geometria. Ela representa a geometria convexa mínima que envolve todas as geometrias dentro do conjunto.
@@ -61138,7 +60831,7 @@ a → geometry
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -61150,7 +60843,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
<h3>função union</h3>
Retorna uma geometria que representa a união do conjunto de pontos das geometrias.
@@ -61167,7 +60860,7 @@ b → geometry
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61195,7 +60888,7 @@ geom → a geometry
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61223,7 +60916,7 @@ geom → a geometry
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61251,7 +60944,7 @@ geom → a geometry
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -61263,8 +60956,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>função contains</h3>
Retorna verdadeiro se e apenas se não houver pontos de b que encontram-se no exterior de a, e pelo menos um ponto do interior de b encontra-se no interior de a.
@@ -61282,7 +60975,7 @@ geometry → geometry
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -61297,8 +60990,8 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
<h3>função wordwrap()</h3>
Retorna uma string envolta a um número máximo / mínimo de caracteres.
@@ -61322,7 +61015,7 @@ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -61338,7 +61031,7 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
<h3>função color_rgb()</h3>
@@ -61359,7 +61052,7 @@ Retorna uma representação de seqüência de caracteres de cor com base em seus
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -61376,7 +61069,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
<h3>função color_cmyk()</h3>
@@ -61398,7 +61091,7 @@ Retorna uma representação de seqüência de caracteres de cor com base em seus
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -61410,7 +61103,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
<h3>função intersecção</h3>
Retorna a geometria que representa a porção de geometria que partilha detalhe entre a geometria a e a geometria b.
@@ -61427,7 +61120,7 @@ geometry → geometria
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -61437,12 +61130,12 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
@@ -61472,7 +61165,7 @@ pode não dar os resultados esperados, se você mover seu projeto do QGIS.
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -61483,8 +61176,8 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
@@ -61510,7 +61203,7 @@ None
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -61525,7 +61218,7 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
<h3>função color_hsv()</h3>
Retorna uma representação de seqüência de caracteres de uma cor com base no seu matiz, saturação e valor de atributos
@@ -61545,7 +61238,7 @@ Retorna uma representação de seqüência de caracteres de uma cor com base no
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -61556,9 +61249,9 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
<h3>expressão ILIKE</h3>
Retorna 1 se o primeiro parâmetro coincide em caso insensível a maiúsculas com o padrão fornecido. LIKE pode ser usado em vez do ILIKE para fazer uma coincidência sensível a maiúsculas. Também trabalha com números.
@@ -61576,7 +61269,7 @@ Nenhum
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -61587,9 +61280,9 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
<h3>expressão LIKE</h3>
Retorna 1 se o primeiro parâmetro coincide com o padrão fornecido. Trabalha também com os números.
@@ -61607,7 +61300,7 @@ Nenhum
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61635,7 +61328,7 @@ geom → a geometry
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -61646,7 +61339,7 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
<h3>função geomFromGML</h3>
@@ -61664,7 +61357,7 @@ text → representação GML de uma geometria
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -61672,7 +61365,7 @@ This group contains functions for handling date and time data.
Este grupo contém funções para a manipulação de dados de data e hora.
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -61684,8 +61377,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
<h3>função combinar</h3>
Retorna a combinação da geometria A e a geometria B.
@@ -61703,9 +61396,9 @@ geometry → geometria
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -61715,8 +61408,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>função de intersecção</h3>
Retorna 1 se a geometria intersecta espacialmente (partilhe qualquer porção do espaço) e 0 se não.
@@ -61734,7 +61427,7 @@ b → geometria
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -61777,7 +61470,7 @@ clamp(1,11,10) → 10 (<i>input</i> é maior que o valor máx
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -61789,8 +61482,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
<h3>função disjoint</h3>
Returna 1 se as geometrias não se "intersectam espacialmente" - se não partilham um espaço conjunto.
@@ -61808,7 +61501,7 @@ b → geometria
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -61819,7 +61512,7 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
<h3>função geomFromWKT</h3>
@@ -61837,7 +61530,7 @@ text → Representação da geometria do Well-Known Text (WKT).
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -61868,43 +61561,7 @@ b → distância para o buffer
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -61932,10 +61589,10 @@ Nenhum
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -61963,25 +61620,7 @@ None
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -61993,8 +61632,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>função crosses</h3>
Returna 1 se as geometrias fornecidas tiverem alguns, mas não todos, pontos interiores em comum.
@@ -62012,7 +61651,7 @@ geometry → geometria
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -62039,7 +61678,7 @@ a → geometria
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -62051,8 +61690,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>função touches</h3>
Retorna 1 se as geometrias têm pelo menos um ponto em comum, mas o seu interior não se intersecta.
@@ -62070,7 +61709,7 @@ b → geometria
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -62082,8 +61721,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>função overlaps</h3>
Returna 1 se as geometrias partilham o espaço, são da mesma dimensão, mas não estão completamente contidos um no outro.
@@ -62101,7 +61740,7 @@ b → geometria
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -62131,7 +61770,7 @@ Nenhum
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -62160,7 +61799,7 @@ Nenhum
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -62191,7 +61830,7 @@ Nenhum
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -62221,7 +61860,7 @@ a → geometria
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -62233,8 +61872,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
<h3>função within</h3>
Retorna 1 se a geometria está completamente dentro da geometria b
@@ -62252,7 +61891,7 @@ geometry → geometria
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -62289,7 +61928,7 @@ $map → "canvas" (dento do enquadramento principal do QGIS)<
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -62301,7 +61940,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
<h3>função distancia</h3>
Returna a distância mínima (baseado na ref espacial) entre as unidades projetadas de duas geometrias.
@@ -62318,7 +61957,7 @@ b → geometria
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -62330,7 +61969,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
<h3>função diferença</h3>
Retorna a geometria que representa parte da geometria a, que não intersecta com a geometria b.
@@ -62347,7 +61986,7 @@ geometry → geometria
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -62358,8 +61997,8 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
@@ -62380,7 +62019,7 @@ Nenhum
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -62392,7 +62031,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
<h3>função symDifference</h3>
Returna a geometria que representa porções de a e b que não se intersectam.
@@ -62409,7 +62048,7 @@ geometry → geometria
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -62436,12 +62075,12 @@ Nenhum
<pre> $ perimeter → 42 </pre>
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -62465,7 +62104,7 @@ Converte uma cadeia de texto para um tipo de intervalo. Pode ser para tirar dias
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -62481,10 +62120,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
<h3>Função hour()</h3>
@@ -62508,7 +62147,7 @@ Extrai a hora de um campo data/hora ou data, ou o número de horas de um
<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -62524,7 +62163,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
<h3>função color_hsla()</h3>
Retorna uma cadeia de texto da representação dos atributos da co baseado na tonalidade, saturação, luminosidade e alfa (transparência)
@@ -62545,7 +62184,7 @@ color_hsla(100,50,70,200) → '166,217,140,200'</p>
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -62571,7 +62210,7 @@ Nenhum
<pre>$pi → 3.14159265358979</pre>
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
@@ -62579,12 +62218,12 @@ This group contains functions that operate on record identifiers.
Este grupo contém funções que operam em identificadores de registro.
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -62608,7 +62247,7 @@ Converte uma sequência de caracteres em um tipo de data hora.
<code>totime('12:30:01') → 12:30:01</code><br>
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -62623,7 +62262,7 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
<h3>função replace()</h3>
Retorna a substituição de uma cadeia de texto com a cadeia de texto fornecida.
@@ -62643,7 +62282,7 @@ replace('O QGIS DEVE SER FIXE','DEVE SER','É') &a
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
@@ -62652,7 +62291,7 @@ Este agrupamento contém funções para manusear verificação condicional em ex
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -62680,7 +62319,7 @@ abs(<i>valor</i>)<br>
<code>abs(-2) → 2</code><br>
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -62710,7 +62349,7 @@ Retorna o maior valor em um conjunto de valores.
max(2,10.2,5.5) → 10.2
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -62739,7 +62378,7 @@ Devolve a raiz quadrada de um valor
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
@@ -62749,7 +62388,7 @@ Este grupo contém funções que operam na condição.
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -62767,7 +62406,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
<h3>função color_cmyka()</h3>
@@ -62790,7 +62429,7 @@ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -62827,7 +62466,7 @@ Também trunca o número nos sítios fornecidos.
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -62843,9 +62482,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
<h3>função year()</h3>
@@ -62870,7 +62509,7 @@ de um <code>Intervalo</code>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -62895,7 +62534,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
@@ -62929,7 +62568,7 @@ END
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -62966,7 +62605,7 @@ Esta função recebe dois argumentos.
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -62994,7 +62633,7 @@ geom → a geometry
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -63038,7 +62677,7 @@ scale_linear(1500,1000,10000,9,20) → 10.22 <i>(por exemplo, escol
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -63051,7 +62690,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
<h3>função trim()</h3>
Remove todos os espaços em branco (espaços, avanços, etc) de uma cadeia de texto.
@@ -63069,7 +62708,7 @@ trim(' olá mundo ') → 'olá mundo'</p>
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -63085,10 +62724,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
<h3>função minute()</h3>
@@ -63114,7 +62753,7 @@ de um <code>Intervalo</code>
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -63143,9 +62782,9 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
<h3>função age()</h3>
@@ -63183,7 +62822,7 @@ usado <code>day</code> para extrair o número de dias<br>
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -63217,7 +62856,7 @@ Esta função tem um argumento.
<code>log10(100) → 2</code><br>
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
@@ -63225,7 +62864,7 @@ This group contains functions to convert on data type to another e.g string to i
Este grupo contém funções para converter o tipo de dados para outro, por exemplo sequência de caracteres para inteiro, inteiror para sequência de caracteres.
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -63253,7 +62892,7 @@ Retorna o cosseno de um ângulo.
cos(1.571) → 0.000796326710733263</p>
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -63262,7 +62901,7 @@ Este grupo contém operadores por exemplo + - *
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -63278,10 +62917,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
<h3>função second()</h3>
@@ -63307,7 +62946,7 @@ de um <code>Intervalo</code>
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -63335,7 +62974,7 @@ Retorna o valor de um arcotangente em radianos.
atan(0.5) → 0.463647609000806</p>
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -63362,7 +63001,7 @@ Nenhum
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -63376,7 +63015,7 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
<h3>Função title()</h3>
Converte todas as palavras de uma sequência de caracteres para maiúsculas (todas as palavras em minúsculas com os principais
@@ -63394,7 +63033,7 @@ letras em maiúscula).
upper('hello WOrld') → 'Hello World'</p>
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -63408,7 +63047,7 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
<h3>Função regexp_match() </h3>
Retorna verdadeiro se qualquer parte de uma sequencia de caracteres corresponde à expressão regular fornecida.
@@ -63426,7 +63065,7 @@ Retorna verdadeiro se qualquer parte de uma sequencia de caracteres corresponde
regexp_match ('ROCKS QGIS', '\\sROCKS') → 1 </p>
- <h3>substr() function</h3>
Return a part of a string
@@ -63441,7 +63080,7 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
<h3>função substr()</h3>
Retorna uma parte da cadeia de texto
@@ -63461,12 +63100,12 @@ substr('OLÁ MUNDO',3,5) → 'Á MUN'</p>
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -63492,7 +63131,7 @@ Formata uma cadeia de texto usando argumentos fornecidos.
<code>format('Isto %1 é %2','um', 'teste') → Isto é um teste</code><br>
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -63507,7 +63146,7 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
<h3>função regexp_replace()</h3>
Retorna uma string substituíndo a expressão regular fornecida.
@@ -63530,7 +63169,7 @@ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD&
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -63544,7 +63183,7 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
<h3>função regexp_substr()</h3>
Retorna a parte da string que corresponde a uma expressão regular fornecida.
@@ -63565,7 +63204,7 @@ regexp_substr('abc123','(\\d+)') →
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -63592,7 +63231,7 @@ Nenhum
<pre>$y → 42</pre>
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -63609,7 +63248,7 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
<h3>Função color_rgba()</h3>
@@ -63631,7 +63270,7 @@ Retorna com a representação de string de uma cor baseada em seus componentes v
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -63659,7 +63298,7 @@ None
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
@@ -63667,7 +63306,7 @@ This group contains math functions e.g square root, sin and cos
Este grupo contém funções matemáticas por exemplo, raiz quadrada, seno e cosseno
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -63698,7 +63337,7 @@ Retorna o menor valor em um conjunto de valores.
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -63709,7 +63348,7 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
<h3>Função lower()</h3>
Converte uma sequência de caracteres em letras minúsculas.
@@ -63724,7 +63363,7 @@ Converte uma sequência de caracteres em letras minúsculas.
lower('HELLO World') → 'hello world'</p>
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -63751,7 +63390,7 @@ Nenhum
<pre>$numfeatures → 42</pre>
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
@@ -63759,7 +63398,7 @@ This group contains functions that operate on strings e.g replace, convert to up
Este grupo contém funções que operam em sequências de caracteres por exemplo, substituir, converter para maiúsculas.
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -63772,7 +63411,7 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
<h3>Função concat ()</h3>
Concatena várias sequencias de caracteres (strings) em uma.
@@ -63790,7 +63429,7 @@ Concatena várias sequencias de caracteres (strings) em uma.
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -63807,8 +63446,8 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
<h3>função coalesce()</h3>
@@ -63833,7 +63472,7 @@ senão o valor do "fallbackField" ou a cadeia de texto 'ERROR&apo
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -63861,12 +63500,12 @@ Retorna o arcoseno de um valor em radianos.
asin(1.0) → 1.5707963267949</p>
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -63890,12 +63529,12 @@ Converte uma cadeia de texto para um tipo data hora Qt.
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -63926,14 +63565,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -63952,14 +63591,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -64064,7 +63703,7 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
<h3>função format_date()</h3>
Formatar um tipo ou string de data em um formato de string personalizado. Usa formato Qt strings dados tempo. Ver <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
@@ -64296,7 +63935,7 @@ Formatar um tipo ou string de data em um formato de string personalizado. Usa fo
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -64324,7 +63963,7 @@ Retorna a tangente de um ângulo.
tan(1.0) → 1.5574077246549</p>
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -64351,7 +63990,7 @@ Nenhum
<pre>$feature → 2</pre>
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -64385,7 +64024,7 @@ Esta função tem um argumento.
<code>ln (2,7182818284590452354) → 1</code><br>
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -64401,7 +64040,7 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
<h3>função color_hsla()</h3>
Retorna uma cadeia de texto da representação dos atributos da cor baseado na tonalidade, saturação, valor e alfa (transparência)
@@ -66976,4 +66615,4 @@ color_hsva(40,100,100,200) → '255,170,0,200'</p>
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_pt_PT.ts b/i18n/qgis_pt_PT.ts
index 422c3e83455..7ea27a4bdc1 100644
--- a/i18n/qgis_pt_PT.ts
+++ b/i18n/qgis_pt_PT.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -206,7 +204,7 @@
Bilbioteca:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<warning> tabela geometry_columns inexistente!
Esta tabela é essencial em muitos programas SIG para enumeração das tabelas.
@@ -416,13 +414,13 @@ Esta tabela é essencial em muitos programas SIG para enumeração das tabelas.<
Scripts:
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<warning> A versão dos scripts instalados não corresponde à dos disponiblilizados!
Provavelmente é resultado de uma atualização incorrecta do PostGIS.
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<warning> Este utilizador não tem privilégios para ler o conteúdo da tabela geometry_columns!
Em muitos programas de SIG, esta tabela é essencial para a enumeração das tabelas.
@@ -2094,7 +2092,7 @@ Isto pode causar resultados inesperados.
campo de comprimento
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
Não é possível apagar shapefile existente
%s
@@ -2404,47 +2402,24 @@ Tem a certeza que quer prosseguir?
remover da seleção atual
- Select by location
Selecionar pela localização
- Select features in:
Seleccionar os elementos em:
- that intersect features in:
que interceptam os elementos em:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Modificar seleção atual por:
+ Modificar seleção atual por:
Use selected features only
- Usar apenas elementos selecionados
+ Usar apenas elementos selecionados
Please specify select layer
@@ -3406,7 +3381,7 @@ Módulo não será ativado.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4723,7 +4698,7 @@ abrir documentação local GDAL em vez da ajuda online.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
Para expor uma matriz com 1 banda e com tabela de cor como matriz com 3 (RGB) ou 4 (RGBA) bandas.
Útil para formatos de saída como JPEG, JPEG2000, MrSID, ECW, que não suportam cores indexadas.
@@ -5525,7 +5500,7 @@ Erro no geoprocessamento GEOS: Um ou mais elementos de entrada têm geometria in
MainWindow
- &Edit
&Editar
@@ -5545,157 +5520,157 @@ Erro no geoprocessamento GEOS: Um ou mais elementos de entrada têm geometria in
Selecionar
- Measure
Medição
- &Decorations
&Decorações
- &Layer
&Camada
- New
Novo
- &Plugins
&Módulos
- &Help
&Ajuda
- &Settings
&Configurações
- &Raster
&Raster
- Vect&or
&Vector
- &OpenStreetMap
&OpenStreetMap
- File
Ficheiro
- Manage Layers
Gerir Camadas
- Digitizing
Vectorizar
- Advanced Digitizing
Vectorização Avançada
- Map Navigation
Navegação no Mapa
- Attributes
Atributos
- Plugins
Módulos
- Help
Ajuda
- Raster
Raster
- Label
Etiqueta
- Vector
Vetor
- Database
Base de Dados
- Web
Internet
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Guardar como Imagem...
- &New Print Composer
&Novo Compositor de Impressão
- Ctrl+P
Ctrl+P
- Composer Manager...
Gestor de compositor...
@@ -5715,948 +5690,940 @@ Erro no geoprocessamento GEOS: Um ou mais elementos de entrada têm geometria in
Novo a partir de modelo
- Preview Mode
Modo de Pré-visualização
- Paste Features as
Colar Elementos como
- &New
&Novo
- &Open...
&Abrir...
- &Save
&Guardar
- Save &As...
Guardar &Como...
- Exit QGIS
Sair do QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
&Anular
- Ctrl+Z
Ctrl+Z
- &Redo
&Refazer
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Cortar Elementos
- Ctrl+X
Ctrl+X
- Copy Features
Copiar Elementos
- Ctrl+C
Ctrl+C
- Paste Features
Colar Elementos
- Ctrl+V
Ctrl+V
- Add Feature
Adicionar Elemento
- Ctrl+.
Ctrl+.
- Move Feature(s)
Mover Elemento(s)
- Reshape Features
Redesenhar Elementos
- Split Features
Dividir Elementos
- Split Parts
Dividir Partes
- Delete Selected
Apagar Selecção
- Add Ring
Adicionar Anel
- Add Part
Adicionar Parte
- Simplify Feature
Simplificar Elemento
- Delete Ring
Apagar Anel
- Delete Part
Apagar Parte
- Merge Selected Features
Juntar elementos selecionados
- Merge Attributes of Selected Features
Juntar Atributos dos Elementos Selecionados
- Node Tool
Ferramenta de Nós
- Rotate Point Symbols
Rodar Símbolos de Pontos
- Snapping Options...
Opções de Snapping...
- Pan Map
Mover Mapa
- Zoom In
Aproximar
- Ctrl++
Ctrl++
- Zoom Out
Afastar
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Selecionar um elemento
+ Selecionar um elemento
+ Select Features by Rectangle
- Selecionar elementos por rectângulo
+ Selecionar elementos por rectângulo
- Select Features by Polygon
Selecionar elementos por polígono
- Select Features by Freehand
Selecionar elementos por delimitação livre
- Select Features by Radius
Selecionar elementos por raio
- Deselect Features from All Layers
Limpar elementos de todas as camadas
- Identify Features
Identificar Elementos
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Medir Linha
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Medir Área
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Medir Ângulo
- Zoom Full
Ver Tudo
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
Aproximar à Camada
- Zoom to Selection
Aproximar à Selecção
- Ctrl+J
Ctrl+J
- Zoom Last
Última Vista
- Zoom Next
Próxima Vista
- Zoom Actual Size
Aproximar ao Tamanho Real
- Zoom to Native Pixel Resolution
Aproximar à Resolução Natural
- Map Tips
Dicas de Mapa
- Show information about a feature when the mouse is hovered over it
Mostrar informação sobre um elemento ao passar-lhe com o rato por cima
- New Bookmark...
Novo Marcador...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Mostra Marcadores
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Atualizar
- Text Annotation
Anotação de Texto
- Form Annotation
Anotação de formulário
- Move Annotation
Mover Anotação
- Labeling
Rotular
- Layer Labeling Options
Opções de etiqueta da camada
- New Shapefile Layer...
Nova Camada Shapefile...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
Nova Camada SpatiaLite ...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Calculadora raster ...
- Add Vector Layer...
Adicionar Camada Vetorial...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Adicionar Camada Raster...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Adicionar Camada PostGIS...
- Ctrl+Shift+D
Ctrl+Shif+D
- Add SpatiaLite Layer...
Adicionar Camada SpatiaLite...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Adicionar Camada Espacial MSSQL...
- Add Oracle Spatial Layer...
Adicionar Camada Espacial Oracle...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
Adicionar Camada WMS/WMTS...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Abrir Tabela de Atributos
- Toggle Editing
Alternar Edição
- Toggles the editing state of the current layer
Alterna o estado de edição da camada atual
- Save for Selected Layer(s)
Guardar para as camadas seleccionadas
- Save edits to current layer, but continue editing
Guardar alterações para a camada atual, mas continuar a editar
- Save As...
Guardar Como...
- Add from Layer Definition File...
Adicionar a partir do Ficheiro de Definições da Camada...
- Save As Layer Definition File...
Guardar Como Ficheiro de Definições da Camada...
- Normal
Normal
- Normal preview mode
Modo de pré-visualização Normal
- Simulate Photocopy (Grayscale)
Simular Fotocópia (escala de cinzas)
- Simulate photocopy (grayscale)
Simular fotocópia (escala de cinzas)
- Simulate Fax (Mono)
Simular Fax (Monocromático)
- Simulate fax (mono)
Simular fax (monocromático)
- Simulate Color Blindness (Protanope)
Simular Daltonismo (Protonopia)
- Simulate color blindness (protanope)
Simular daltonismo (protonopia)
- Simulate Color Blindness (Deuteranope)
Simular Daltonismo (Deuteranopia)
- Simulate color blindness (deuteranope)
Simular daltonismo (deuteranopia)
- Set Scale Visibility of Layer(s)
Definir a Escala de Visibilidade da Camada(s)
- Remove Layer(s)
Remover Camada(s)
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Definir SRC de Camada(s)
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
Definir SRC do projecto a partir de camada
- Properties...
Propriedades...
- Query...
Consultar...
- Add to Overview
Adicionar ao Enquadramento
- Add All to Overview
Adicionar Tudo ao Enquadramento
- Remove All from Overview
Remover Tudo do Enquadramento
- Show All Layers
Mostrar Todas as Camadas
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Ocultar Todas as Camadas
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
Gerir e Instalar Módulos...
- Open Field Calculator
Abrir Calculadora de Campos
- Add Delimited Text Layer...
Adicionar Camada de Texto Delimitado...
- Add Delimited Text Layer
Adicionar Camada de Texto Delimitado
- New Vector Layer
Nova Camada Vectorial
- Paste features in clipboard into a new OGR vector layer.
Colar elementos na área de transferência em novas camadas vectoriais OGR.
- New Memory Vector Layer
Nova Camada Vectorial de Memória
- Paste features in clipboard into a new memory vector layer.
Colar elementos na área de transferência na camada vectorial de memória.
- Toggle Full Screen Mode
Activar Modo de Ecrã Completo
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Propriedades do Projeto...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Opções...
- Custom CRS...
SRC Personalizado...
- Configure shortcuts...
Configurar atalhos...
- Local Histogram Stretch
Expansão do Histrograma Local
- Stretch histogram of active raster to view extents
Ajustar histograma da camada raster à extensão do mapa
- Help Contents
Conteúdos de Ajuda
- F1
F1
- API documentation
Documentação da API
- QGIS Home Page
Página Web do QGIS
- Ctrl+H
Ctrl+H
- Check QGIS Version
Verificar Versão do QGIS
- Check if your QGIS version is up to date (requires internet access)
Verificar se a sua versão do QGIS está atualizada (necessita de ligação à internet)
- About
Sobre
- QGIS Sponsors
Patrocinadores QGIS
- Move Label
Mover Etiqueta
- Rotate Label
Rodar Etiqueta
- Rotate Label
Ctl (Cmd) increments by 15 deg.
Rodar legenda
Ctl (Cmd) em incrementos de 15 graus.
- Change Label
Alterar Etiqueta
- Style Manager...
Gestor de estilos...
- Python Console
Consola Python
- Full histogram stretch
Expansão de histrograma completa
- Stretch Histogram to Full Dataset
Expandir Histograma ao Total da Camada
- Customization...
Personalização...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
Isto está aqui apenas para evitar conflitos nos atalhos, os atalhos são capturados em QgsCustomization
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Incorporar Camadas e Grupos...
- Embed layers and groups from other project files
Incorporar camadas e grupos de outros ficheiros de projecto
- &Copyright Label
&Etiqueta de Copyright
- Creates a copyright label that is displayed on the map canvas.
Cria uma etiqueta de copyright que será mostrado na tela do mapa.
- &North Arrow
&Seta Norte
- "Creates a north arrow that is displayed on the map canvas"
"Cria uma seta norte que será mostrada na tela."
- &Scale Bar
&Escala Gráfica
- Creates a scale bar that is displayed on the map canvas
Cria uma escala gráfica que é exibida na tela do mapa
- Add WFS Layer...
Adicionar Camada WFS...
- Add WFS Layer
Adicionar Camada WFS
- Feature Action
Acção do Elemento
- Run Feature Action
Executar acções do elemento
- Pan Map to Selection
Ajustar mapa à selecção
- Touch zoom and pan
Toque em zoom e pan
- Offset Curve
Curva de Afastamento
- Copy style
Copiar estilo
- Paste style
Colar estilo
- Add WCS Layer...
Adicionar Camada WCS...
- &Grid
&Grelha
- Grid
Grelha
- Pin/Unpin Labels
Fixar / Não fixar uma etiqueta
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6667,44 +6634,44 @@ Shift para não fixar, Ctl (Cmd) muda o estado.
Funciona em todas as camadas editáveis
- Highlight Pinned Labels
Realçar as legendas fixadas
- New Blank Project
Novo projecto em branco
- Local Cumulative Cut Stretch
Expansão Cumulativa Local do Corte
- Local cumulative cut stretch using current extent, default limits and estimated values.
Expansão Cumulativa Local do Corte usando a extensão atual, limites padrão e valores estimados.
- Full Dataset Cumulative Cut Stretch
Expansão Cumulativa do Corte para a totalidade dos dados
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
Expansão Cumulativa do Corte usando a totalidade da extensão de dados, limites padrão e valores estimados.
- Show/Hide Labels
Mostrar/Esconder etiquetas
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6714,128 +6681,128 @@ Selecionar o elementos para ver legenda.
Shift+seleção da camada ativa
- Html Annotation
Anotação Html
- Duplicate Layer(s)
Duplicar camada(s)
- SVG annotation
Anotação SVG
- Save for All Layers
Guardar para todos as Camadas
- Rollback for All Layers
Repor para todas as camadas
- Cancel for All Layers
Cancelar todas as Camadas
- Rollback for Selected Layer(s)
Repor para todas as camadas selecionadas
- Current Edits
Edições Atuais
- Cancel for Selected Layer(s)
Cancelar para a camada seleccionada
- Save Layer Edits
Guardar as edições da camada
- Rotate Feature(s)
Rodar Elemento(s)
- &Download data
&Transferir dados
- &Import topology from XML
&Importar topologia a partir do XML
- &Export topology to SpatiaLite
&Exportar topologia para o SpatiaLite
- Increase brightness
Aumentar brilho
- Decrease brightness
Diminuir Brilho
- Increase contrast
Aumentar Contraste
- Decrease contrast
Diminuir Contraste
- Select By Expression
Seleccionar por Expressão
- Select features using an expression
Seleccionar elementos usando uma expressão
- Need commercial support?
Necessita de suporte comercial?
- DXF Export...
Exportar como DXF...
- Fill Ring
Preencher anel
@@ -7281,11 +7248,6 @@ Shift+seleção da camada ativa
Can't save model
Não pode guardar o modelo
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
O modelo não contém quaisquer algoritmos e/ou parâmetros e não pode ser executado
@@ -7313,7 +7275,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- O modelo seleccionado não pode ser carregado.
+ O modelo seleccionado não pode ser carregado.
Linha errada: %s
@@ -8167,22 +8129,22 @@ Linha errada: %s
Estimando derivados normais...
- minidump written to %1
minidump escrito em %1
- writing of minidump to %1 failed (%2)
Falhou a escrita do minidump em %1(%2)
- creation of minidump to %1 failed (%2)
Falhou a criação do minidump em %1(%2)
- Crash dumped
Informação da falha
@@ -8335,6 +8297,7 @@ Erro(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
SRC gerado automaticamente
@@ -8499,85 +8462,85 @@ Erro(%2): %3
Impossível converter '%1' para formato Intervalo
- Cannot convert '%1' to boolean
Impossível converter '%1' para formato boolean
- Domain max must be greater than domain min
Domínio max tem de ser maior que o domínio min
- Exponent must be greater than 0
Exponente deve ser maior que 0
- Invalid regular expression '%1': %2
Expressão regular inválida '%1': %2
- Index is out of range
Indíce fora do intervalo
- Cannot convert '%1:%2:%3' to color
Impossível converter '%1:%2:%3' para a cor
- Cannot convert '%1:%2:%3:%4' to color
Impossível converter '%1:%2:%3:%4' para a cor
- "%1" is not a valid color ramp
"%1" não é uma rampa de cores válida
- Cannot convert '%1:%2:%3:%4:%5' to color
Impossível converter '%1:%2:%3:%4:%5' para a cor
- function help for %1 missing
função de ajuda para %1 em falta
- Operators
Operadores
- Fields and Values
Campos e Valores
- Math
Matemática
- Conversions
Conversões
- Conditionals
Condicionais
@@ -8624,58 +8587,58 @@ Erro(%2): %3
ano|anos
- Date and Time
Data e hora
- String
String
- Color
Cor
- Geometry
Geometria
- Record
Registo
- No root node! Parsing failed?
Nó inexistente! Falha na análise?
- (no root)
(sem administrador)
- Unary minus only for numeric values.
Sinal negativo apenas para valores numéricos.
- Can't preform /, *, or % on DateTime and Interval
Impossível incluir /, *, ou % no formato Data e Hora e Intervalo
- [unsupported type;%1; value:%2]
[tipo não suportado; %1; value: %2]
- Column '%1' not found
Coluna '%1' não encontrada
@@ -8763,10 +8726,7 @@ Erro(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- linha %1 contém %n nó duplicado em %2
- linha %1 contém %n nós duplicados em %2
-
+ linha %1 contém %n nó duplicado em %2 linha %1 contém %n nós duplicados em %2
Version 0.1
@@ -9889,6 +9850,7 @@ Apenas %1 de %2 elementos escritos.
Layers
Camadas
@@ -10466,12 +10428,14 @@ Apenas %1 de %2 elementos escritos.
Ferramenta de Importação de Shapefile para PostgreSQL/PostGIS
+ SQL Anywhere plugin
- Módulo SQL Anywhere
+ Módulo SQL Anywhere
+ Store vector layers within a SQL Anywhere database
- Guardar camadas vectoriais numa base de dados SQL Anywhere
+ Guardar camadas vectoriais numa base de dados SQL Anywhere
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
O QGIS não encontrou sua instalação de GRASS.
Deseja especificar o caminho (GISBASE) para sua instalação GRASS?
@@ -10912,7 +10876,7 @@ Deseja especificar o caminho (GISBASE) para sua instalação GRASS?Impossível criar ficheiro %1.qpj
- Fetching features failed.
SQL:%1
Error: %2
@@ -10921,7 +10885,7 @@ SQL: %1
Erro: %2
- Oracle
Oracle
@@ -11378,12 +11342,14 @@ SQL: %1
elemento com múltiplas partes
+ Error describing bind parameters
- Erro ao descrever os parâmetros de ligação
+ Erro ao descrever os parâmetros de ligação
+ Error binding parameters
- Erro nos parâmetros de ligação
+ Erro nos parâmetros de ligação
Read-only field that generates a UUID if empty.
Campo só de leitura que gera um UUID se estiver vazio.
-
- Legend
- Legenda
-
QSpatiaLiteDriver
- Error opening database
Erro na abertura da base de dados
- Error closing database
Erro no fecho da base de dados
- Unable to begin transaction
Impossível começar a transacção
- Unable to commit transaction
Impossivel submeter a transação
- Unable to rollback transaction
Impossivel reverter a transação
@@ -11593,27 +11554,27 @@ A resposta foi:
Sem consulta
- Unable to execute statement
Impossível executar instrução
- Unable to execute multiple statements at a time
Impossível executar múltiplas instruções ao mesmo tempo
- Unable to reset statement
Impossível repor instrução
- Unable to bind parameters
Impossível combinar parâmetros
- Parameter count mismatch
Contagem de parâmetros é não coincidente
@@ -11790,61 +11751,61 @@ A resposta foi:
QGIS preparado!
- Minimize
Minimizar
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
Minimizar a janela activa
- Zoom
Zoom
- Toggles between a predefined size and the window size set by the user
Alterna entre um tamanho predefinido e um tamanho de janela definido pelo utilizador
- Bring All to Front
Trazer Tudo para a Frente
- Bring forward all open windows
Trazer para frente todas as janelas abertas
- Current Edits
Edições Atuais
- Error
Erro
- Failed to open Python console:
Falha ao abrir o terminal Phyton:
@@ -11867,138 +11828,138 @@ Por favor contate os programadores.
QGIS - %1 ('%2')
- Panels
Painéis
- Toolbars
Barras de Ferramentas
- Window
Janela
- &Database
&Base de Dados
- &Web
&Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
A barra de progresso mostra a duração e estado da renderização das camadas e outras operações
- Toggle extents and mouse position display
Alternar visualização entre extensão do mapa e posição do rato
- Coordinate:
Coordenada:
- Current map coordinate
Coordenada do mapa atual
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
Mostra as coordenadas do mapa na posição atual do cursor. A tela é continuamente atualizada durante o movimento do rato. Permite ainda ser editado para definir o centro da tela numa determinada posição. O formato é Lat, Long ou Leste, Norte
- Current map coordinate (lat,lon or east,north)
Coordenadas do mapa atual (Lat, Long ou Leste,Norte)
- Scale
Escala
- Current map scale
Escala atual do mapa
- Displays the current map scale
Exibe a escala atual do mapa
- Current map scale (formatted as x:y)
Escala atual do mapa (formatada como x:y)
- Render
Desenhar
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Quando marcadas, as camadas do mapa são desenhadas em resposta aos comandos de navegação pelo mapa e outros eventos. Quando não marcadas, nenhuma renderização será feita. Isso permite ao utilizador adicionar um grande número de camadas e fazer alterações antes de renderizar.
- Toggle map rendering
Activa a renderização do mapa
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
Este ícone mostra se a transformação do sistema de coordenadas em tempo real está activado ou não. Clique no ícone para abrir a janela de propriedade e alterar este comportamento.
- CRS status - Click to open coordinate reference system dialog
Estado do SRC - Clique para abrir a janela do sistema de coordenadas
- Ready
Pronto
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Visão geral da área do mapa. Esta área pode ser usada para mostrar um localizador na área total do mapa. A extensão atual é mostrada como um rectângulo vermelho. Qualquer camada do mapa pode ser adicionada na visão geral.
- Overview
enquadramento
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Legenda do mapa que exibe todas as camadas atualmente na área do mapa. Clique na caixa de seleção para ligar ou desligar uma camada. Duplo clique numa camada na legenda para alterar a sua aparência e definir outras propriedades.
- Layers
Camadas
- Map layer list that displays all layers in drawing order.
Listagem da camada do mapa que exibe as camadas por ordem de visualização.
- Layer order
Ordem da camada
@@ -12008,394 +11969,388 @@ Por favor contate os programadores.
Privado qgis.db
- < Blank >
< Blank >
- QGIS version
Versão do QGIS
- QGIS code revision
Revisão do código do QGIS
- Compiled against Qt
Compilado contra Qt
- Running against Qt
Em execução contra Qt
- Compiled against GDAL/OGR
Compilado contra GDAL/OGR
- Running against GDAL/OGR
Em execução contra GDAL/OGR
- PostgreSQL Client Version
Versão de cliente PostgreSQL
- No support.
Sem suporte.
- SpatiaLite Version
Versão SpatiaLite
- QWT Version
Versão QWT
- PROJ.4 Version
Versão PROJ.4
- QScintilla2 Version
Versão QScintilla2
- This copy of QGIS writes debugging output.
Esta cópia do QGIS escreve a depuração de saída.
- %1 doesn't have any layers
%1 não possui quaisquer camadas
- Invalid Data Source
Fonte de Dados Inválida
- %1 is not a valid or recognized data source
%1 não é uma fonte de dados reconhecida
- Vector
Vector
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
Impossivel obter diálogo PostgreSQL selecionado do fornecedor.
- %1 is an invalid layer - not loaded
%1 é uma camada inválida - não carregado
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1 é uma camada inválida e não pode ser carregada. Por favor verifique a <a href="#messageLog">mensagens de registo</a> para mais informação.
- QGIS files
Ficheiros QGIS
- No legend entries selected
Sem entradas de legenda seleccionadas
- Select the layers and groups you want to remove in the legend.
Seleccionar camadas e grupos que quer remover da legenda.
- Remove layers and groups
Remover camadas e grupos
- Remove %n legend entries?
number of legend items to remove
-
- Remover %n entrada da legenda?
- Remover %n entradas da legenda?
-
+ Remover %n entrada da legenda? Remover %n entradas da legenda?
- %n legend entries removed.
number of removed legend entries
-
- %n entrada de legenda removida.
- %n entradas de legenda removidas.
-
+ %n entrada de legenda removida. %n entradas de legenda removidas.
- %1 (%2 type unsupported)
%1 (%2 tipo não suportado)
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/en/site/forusers/commercial_support.html
- Do you want to save the current project? %1
Deseja guardar o projeto actual?%1
- Invalid Layer
Camada Inválida
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
Impossivel obter diálogo SpatiaLite selecionado do fornecedor.
- Delimited Text
Texto delimitado
- Cannot get Delimited Text select dialog from provider.
Não é possível obter o texto delimitado do fornecedor.
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
Impossível obter diálogo MSSQL selecionado do fornecedor.
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
Não foi possível obter o diálogo seleccionado do provedor Oracle.
- WMS
WMS
- Cannot get WMS select dialog from provider.
Impossivel obter diálogo WMS selecionado do fornecedor.
- WCS
WCS
- Cannot get WCS select dialog from provider.
Não foi possível obter diálogo WCS selecionado do fornecedor.
- WFS
WFS
- Cannot get WFS select dialog from provider.
Impossivel obter diálogo WFS selecionado do fornecedor.
- Default failed to open: %1
Falha ao abrir padrão: %1
- Default not found: %1
Padrão não encontrado: %1
- Open Template Project
Abrir Projeto Modelo
- Auto-open Project
Auto-abertura do Projeto
- Failed to open: %1
Falha ao abrir: %1
- Not valid project file: %1
Ficheiro de Projeto não é válido: %1
- Project failed to open: %1
Projeto falhou ao abrir: %1
- Default template has been reopened: %1
O template padrão foi re-aberto: %1
- File not found: %1
Ficheiro não encontrado: %1
- Calculating...
A Calcular...
- Abort...
Abortar...
- Choose a QGIS project file to open
Escolha um ficheiro de projeto do QGIS para abrir
- Loading project: %1
Carregando Projeto: %1
- Unable to open project
Não é possível abrir o projecto
- Security warning
Aviso de segurança
- project macros have been disabled.
macros do projeto foram desativadas.
- Enable macros
Ativar macros
- Project loaded
Projeto carregado
- Choose a QGIS project file
Escolha um ficheiro de projeto do QGIS
- Saved project to: %1
Projeto guardado em: %1
- Unable to save project %1
Não é possivel guardar o projecto %1
- Choose a file name to save the QGIS project file as
Escolha um nome de ficheiro para salvar o projeto do QGIS como
- Unable to load %1
Impossível carregar %1
- Choose a file name to save the map image as
Escolha um nome de ficheiro para guardar a imagem do mapa como
- Saved map image to %1
Imagem do mapa guardada em %1
- Default system font substituted.
Fonte padrão do sistema foi substituída.
- Labeling
Rotular
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
Fonte para a camadar <b><u>%1</u></b> não foi encontrada (<i>%2</i>). %3
- Open labeling dialog
Abrir diálogo de rótulos
@@ -12496,451 +12451,445 @@ Por favor contate os programadores.
Data/Hora
- Compiled against GEOS
Compilado com GEOS
- Running against GEOS
Correndo GEOS
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
Falha na criação da Camada. Por favor verifique <a href="#messageLog">mensagem de registo</a> para mais informação.
- Insufficient permissions
Permissões insuficientes
- The project file is not writable.
Não é permitido guardar o ficheiro do projecto.
- DXF export completed
Exportação DXF completa
- DXF export failed
Exportação DXF falhou
- Commit errors
Erros de submissão
- Could not commit changes to layer %1
Não foi possível submeter alterações na camada %1
- Errors: %1
Erros: %1
- Show more
Mostrar mais
- Labeling Options
Opções de etiquetas
- Please select a vector layer first
Por favor selecione primeiro uma camada vetorial
- Layer labeling settings
Configurações da camada de etiqueta
- Reading raster
A ler raster
- Cannot write raster error code: %1
Não foi possível escrever o erro do código raster: %1
- Saving done
Guardado
- Export to vector file has been completed
Exportação para ficheiro vetorial completada
- Save error
Erro ao Guardar
- Export to vector file failed.
Error: %1
Exportação para ficheiro vetorial falhou.
Erro: %1
- No Layer Selected
Nenhuma Camada Seleccionada
- To delete features, you must select a vector layer in the legend
Para apagar elementos, deve selecionar a camada vetorial na legenda
- No Vector Layer Selected
Nenhuma Camada Vetorial Selecionada
- Deleting features only works on vector layers
Apagar elementos só funciona em camadas vectoriais
- Provider does not support deletion
O fornecedor não suporta eliminação
- Data provider does not support deleting features
O fornecedor de dados não suporta eliminação de elementos
- Layer not editable
A camada não pode ser editada
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
A camada atual não é editável. Escolha 'Iniciar edição' na barra da ferramentas de digitalização.
- No Features Selected
Nenhum Elemento Seleccionado
- The current layer has not selected features
A camada actual não tem elementos seleccionados
- Delete features
Eliminar elementos
- Delete %n feature(s)?
number of features to delete
-
- Eliminar %n elemento?
- Eliminar %n elementos?
-
+ Eliminar %n elemento? Eliminar %n elementos?
- Features deleted
Elementos eliminados
- Problem deleting features
Problema ao eliminar elementos
- A problem occured during deletion of features
Ocorreu um problema enquanto se eliminavam elementos
- %n feature(s) deleted.
number of features deleted
-
- %n elemento apagado.
- %n elementos apagados.
-
+ %n elemento apagado. %n elementos apagados.
- Merging features...
A juntar elementos...
- Abort
Abortar
- Create unique print composer title
Criar um título único do compositor de impressão
- (title generated if left empty)
(título gerado se a esquerda estiver vazia)
- Composer title
Título do compositor
- Title can not be empty!
O Título não pode estar vazio!
- Title already exists!
O título já existe!
- Composer %1
Compositor %1
- copy
copiar
- No active layer
Nenhuma camada ativa
- No active layer found. Please select a layer in the layer list
Nenhuma camada activa encontrada. Selecione uma camada na lista de camadas
- Active layer is not vector
A camada activa não é vetorial
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
A ferramenta para juntar elementos funciona apenas com camadas vetoriais. Selecione uma camada vetorial a partir da lista de camadas
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
Juntar elementos apenas pode ser realizado para camadas em modo de edição. Para usar a ferramenta de junção elementos, selecione Camadas > Alternar edição
- Not enough features selected
Elementos selecionados insuficientes
- The merge tool requires at least two selected features
A ferramenta de juntar requer pelo menos dois elementos selecionados
- Merged feature attributes
Atributos das caractristicas agregadas
- Merge failed
Falha ao juntar
- An error occured during the merge operation
Ocorreu um erro na operação de juntar
- Union operation canceled
Operação de união cancelada
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
A operação de união iria resultar num tipo de geometria que não é compatível com a camada atual e portanto será cancelada
- Merged features
Juntar elementos
- No active vector layer
Nenhuma camada vetorial activa
- To select features, choose a vector layer in the legend
Para selecionar elementos, escolha a camada vetorial na legenda
- Features cut
Elementos Cortados
- Features pasted
Elementos Colados
- Paste features
Colar elementos
- no features could be successfully pasted.
não foram colados elementos com sucesso.
- %1 features were successfully pasted.
%1 elemento foram colados com sucesso.
- %1 of %2 features could be successfully pasted.
%1 de %2 elementos podem ter sido colados com sucesso.
- Pasted
Colado
- New memory layer name
Novo nome para a camada de memória
- Layer name
Nome da camada
- No features in clipboard.
Não existem elementos na área de transferência.
- No features with geometry found, point type layer will be created.
Não forma encontrados elementos com geometria, uma camada do tipo ponto será criada.
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
Foi encontrado múltiplos tipos de geometria, elementos com geometria diferente da %1 serão criadas sem geometria.
- Cannot create new layer
Impossível criar uma nova camada
- Cannot create field %1 (%2,%3)
Impossível criar campo %1 (%2,%3)
- Cannot copy style: %1
Impossível copiar estilo: %1
- Cannot parse style: %1:%2:%3
Impossível analisar estilo: %1:%2:%3
- Cannot read style: %1
Impossível ler estilo: %1
- Start editing failed
Falha ao iniciar a edição
- Provider cannot be opened for editing
Fornecedor não pode ser aberto para edição
- Stop editing
Parar edição
- Do you want to save the changes to layer %1?
Salvar as mudanças para a camada %1?
- Problems during roll back
Problemas durante reversão
- Could not %1 changes to layer %2
Errors: %3
@@ -12949,356 +12898,350 @@ Errors: %3
Erro: %3
- rollback
recuar
- cancel
Cancelar
- Save
Salvar
- all
Tudo
- Rollback
Recuar
- Cancel
Cancelar
- Current edits
Edições atuais
- %1 current changes for %2 layer(s)?
%1 alterações atuais para %2 camada(s)?
- copy
copiar
- Plugin layer
Camada plugin
- Memory layer
Camada Memória
- Duplicate layer:
Duplicar camada:
- %1 (duplication resulted in invalid layer)
%1 (duplicação resultou numa camada inválida)
- Set scale visibility for selected layers
Definir a escala de visibilidade para as camadas seleccionadas
- Couldn't load Python support library: %1
Não foi possível carregar a biblioteca de suporte Python: %1
- Couldn't resolve python support library's instance() symbol.
Não foi posível resolver o simbolo de exemplo () da biblioteca de suporte python.
- Python support ENABLED :-)
Suporte de Python ATIVADO :-)
- There is a new version of QGIS available
Existe uma nova versão do QGIS disponível
- You are running a development version of QGIS
Está a usar uma versão de desenvolvimento do QGIS
- You are running the current version of QGIS
Está a usar a versão atual do QGIS
- Would you like more information?
Gostaria de obter mais informações?
- QGIS Version Information
Informações sobre a versão do QGIS
- QGIS - Changes since last release
QGIS - Alterações deste a última versão
- Unable to get current version information from server
Impossível obter informações do servidor sobre a versão atual
- Connection refused - server may be down
Conexão recusada - o servidor pode estar indisponível
- QGIS server was not found
Servidor do QGIS não foi encontrado
- Unknown network socket error: %1
Erro desconhecido de socket de rede: %1
- Unable to communicate with QGIS Version server
%1
Não é possível comunicar com o servidor de versão do QGIS
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
Para realizar a extensão completa aos limites do histograma, precisa selecionar uma camada raster.
- To change brightness or contrast, you need to have a raster layer selected.
Para alterar o brilho ou o contraste, precisa de ter uma camada raster selecionada.
- en
documentation language
en
- Layer is not valid
Camada não é válida
- The layer %1 is not a valid layer and can not be added to the map
A camada %1 não é uma camada válida e não pode ser adicionada ao mapa
- The layer is not a valid layer and can not be added to the map
A camada não é uma camada válida e não pode ser adicionada ao mapa
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
Projeto tem camada(s) em modo edição com edições por guardar, o que NÃO serão salvas!
- Save?
Guardar?
- Current CRS: %1 (OTFR enabled)
SRC atual: %1 (OTFR ativado)
- Current CRS: %1 (OTFR disabled)
SRC atual: %1 (OTFR desativado)
- Map coordinates for the current view extents
Coordenadas atuais para a extensão visivel no mapa
- Map coordinates at mouse cursor position
Coordenadas do mapa na posição do cursor do rato
- Extents:
Extensão:
- Maptips require an active layer
Dicas do Mapa requer uma camada activa
- %n feature(s) selected on layer %1.
number of selected features
-
- %n elemento selecionado na camada %1.
- %n elementos selecionados na camada %1.
-
+ %n elemento selecionado na camada %1. %n elementos selecionados na camada %1.
- Open a GDAL Supported Raster Data Source
Abrir uma fonte suportada de dados raster GDAL
- Error adding valid layer to map canvas
Erro ao adicionar uma camada válida no mapa
- Raster layer
Camada Raster
- %1 is not a supported raster data source
%1 não é uma fonte de dados raster suportada
- Unsupported Data Source
Fonte de dados não suportada
- Exit QGIS
Sair do QGIS
- Do you really want to quit QGIS?
Deseja mesmo sair do QGIS?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
Este ficheiro de projecto foi guardado por uma versão antiga do QGIS. Quando guardar este ficheiro de projecto, o QGIS irá actualizá-lo para a última versão, poderá ser impossível a renderização para versões mais antigas do QGIS.
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
<p> Este projeto foi guardado numa versão anterior do QGIS. Quando guardar este ficheiro de projeto, o QGIS irá atualizá-lo para a ultima versão, tornando-o possivelmente inútil nas versões anteriores do QGIS.<p> Embora os programadores tentem manter a compatibilidade com versões anteriores, algumas informações do projeto antigo podem-se perder. Para melhorar a qualidade do QGIS, agradecemos que nos reporte um bug para %3. Confirme que inclui o ficheiro de projecto antigo, e descreva a versão do QGIS que gerou o erro.<p> Para remover este aviso ao abrir um projeto antigo, des-selecione a caixa '%5' no menu %4.<p>Versão do ficheiro de projeto: %1<br>Versão atual do QGIS: %2
- <tt>Settings:Options:General</tt>
Menu path to setting options
<tt>Configurações:Opções:Geral</tt>
- Warn me when opening a project file saved with an older version of QGIS
Avisar-me quando abrir um ficheiro de projecto guardado numa versão mais antiga do QGIS
- Project file is older
O ficheiro do projecto é mais antigo
- This project file was saved by an older version of QGIS
Este ficheiro de projecto foi gravado com uma versão anterior do QGIS
- Please check the <a href="#messageLog">message log</a> for further info.
Por favor verifique a <a href="#messageLog">mensagem de registo</a> para mais informação.
- A network request timed out, any data received is likely incomplete.
O pedido à rede acabou, qualquer tipo de dado recebido deverá estar incompleto.
- Warning
Aviso
- This layer doesn't have a properties dialog.
Esta camada não possui diálogo de propriedades.
- Authentication required
Autenticação necessária
- Proxy authentication required
Autenticação proxy necessária
- SSL errors occured accessing URL %1:
Ocorreu um erro SSL ao aceder ao URL %1:
-
Always ignore these errors?
Ignorar sempre estes erros?
- %n SSL errors occured
number of errors
-
- Ocorreu %n erro SSL
- Ocorreram %n erros SSL
-
+ Ocorreu %n erro SSL Ocorreram %n erros SSL
@@ -13330,7 +13273,7 @@ Always ignore these errors?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -13680,19 +13623,19 @@ p, li { white-space: pre-wrap; }
QgsApplication
- Exception
Excepção
- unknown exception
Excepção desconhecida
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13716,31 +13659,31 @@ Pesquisa de Caminho SVG: %8
Caminho do utilizador DB: %9
-
match indentation of application state
corresponder indentação ao estado da aplicação
- [ERROR] Can not make qgis.db private copy
[ERRO] Impossível realizar uma cópia privada de qgis.db
- Could not open qgis.db
Não foi possivel abrir o qgis.db
- Migration of private qgis.db failed.
%1
Falha na migração de privado qgis.db.
%1
- Update of view in private qgis.db failed.
%1
Falha na atualização da visualização em qgis.db (modo privado).
@@ -13750,28 +13693,28 @@ Caminho do utilizador DB: %9
QgsAtlasComposition
- Atlas filter eval error: %1
Erro de avaliação do filtro do Atlas: %1
- Composer
Compositor
- No matching atlas features
Os elementos do atlas não coincidem
- Atlas feature %1 of %2
%1 de %2 Elemento(s) do Atlas
- Atlas filename evaluation error: %1
Erro na avaliação do nome do ficheiro Atlas: %1
@@ -13787,7 +13730,7 @@ Caminho do utilizador DB: %9
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
Não é possível definir o nome de ficheiro padrão como '%1'
@@ -14482,10 +14425,7 @@ erro de análise:
Attribute table - %1 (%n Feature(s))
feature count
-
- Tabela de atributos - %1 (%nElemento)
- Tabela de atributos - %1 (%n Elementos)
-
+ Tabela de atributos - %1 (%nElemento) Tabela de atributos - %1 (%n Elementos)
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- Tem a certeza que deseja excluir %n marcador?
- Tem a certeza que deseja excluir %n marcadores?
-
+ Tem a certeza que deseja excluir %n marcador? Tem a certeza que deseja excluir %n marcadores?
QgsCategorizedSymbolRendererV2Model
- Symbol
Símbolo
- Value
Valor
- Label
Etiqueta
@@ -15268,49 +15205,49 @@ Base de dados:%2
Avançado
- Random colors
Cores aleatórias
- Symbol levels...
Nível dos símbolos...
- High number of classes!
Número alto de classes!
- Classification would yield %1 entries which might not be expected. Continue?
A classificação pode produzir %1 de entradas que poderão não ser expectáveis. Continuar?
- Error
Erro
- There are no available color ramps. You can add them in Style Manager.
Não existem rampas de cores disponíveis. Pode adicioná-las no Gestor de Estilos.
- The selected color ramp is not available.
A cor da escala seleccionada não está disponível.
- Confirm Delete
Confirme a exclusão
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
O campo de classificação foi mudado de '%1' para '%2'.
Podem as classes ser excluídas antes da classificação?
@@ -15368,25 +15305,20 @@ Podem as classes ser excluídas antes da classificação?
QgsColorButton
- Select Color
Seleccionar Cor
- Copy color
Copiar cor
- Paste color
Colar cor
-
- Pick color
-
QgsColorDialog
@@ -15458,7 +15390,7 @@ Podem as classes ser excluídas antes da classificação?
Composer
Compositor
@@ -15617,8 +15549,8 @@ Podem as classes ser excluídas antes da classificação?
Set as atlas feature for %1
Definir como elemento do atlas para %1
@@ -15655,7 +15587,7 @@ Podem as classes ser excluídas antes da classificação?
Choose a file name to save the map as
Escolha um nome para salvar o mapa como
@@ -15666,15 +15598,15 @@ Podem as classes ser excluídas antes da classificação?
Empty filename pattern
Nome do ficheiro padrão vazio
The filename pattern is empty. A default one will be used.
O nome do ficheiro padrão está vazio. Será usado um predefinido.
@@ -15685,15 +15617,15 @@ Podem as classes ser excluídas antes da classificação?
Unable to write into the directory
Não é possível guardar neste local
The given output directory is not writable. Cancelling.
O diretório de saída não é gravável. Cancelar.
@@ -15703,251 +15635,251 @@ Podem as classes ser excluídas antes da classificação?
Atlas processing error
Erro no processamento Atlas
Feature filter parser error: %1
Erro na análise no filtro do elemento: %1
Error creating %1.
Erro na criação do %1.
Rendering maps...
Renderizando mapas...
Abort
Abortar
- Big image
Imagem grande
- To create image %1x%2 requires about %3 MB of memory. Proceed?
Para criar imagem %1x%2 são necessários %3 MB de memória. Preceder?
- Choose a file name to save the map image as
Escolha um nome para salvar a imagem do mapa como
- Memory Allocation Error
Erro de alocação de memória
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
Tentando criar imagem #%1( %2x%3 @ %4dpi ) pode resultar num estouro da memória.
Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno
- Image export error
Erro na exportação da imagem
- Directory where to save image files
Diretoria onde salvar ficheiros de imagem
- Image format:
Formato imagem:
- SVG warning
Aviso SVG
- Don't show this message again
Não mostrar esta mensagem novamente
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>A função de exportação SVG no QGIS tem vários problemas devido a bugs e deficiências no
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
código Qt4 svg. Em particular, existem problemas com camadas que não são aparadas da caixa limite do mapa.</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
Se necessita de um ficheiro de saída do tipo vetorial é sugerido que tente imprimir para PostScript se o SVG criado não foi satisfatório.</p>
- SVG Format
Formato SVG
- Directory where to save SVG files
Diretoria onde salvar ficheiros SVG
- SVG export error
Erro na exportação do SVG
- on page
na página
- SVG error
Erro no SVG
- There was an error in SVG output for SVG layer
Houve um erro no ficheiro de saída SVG para a camada SVG
- copy
copiar
- Duplicating composer...
Duplicando o compositor...
- Duplicate Composer
Compositor Duplicado
- Composer duplication failed.
Duplicação do compositor falhou.
- Save template
Salvar modelo
- Composer templates
Modelos de compositor
- Save error
Erro ao salvar
- Error, could not save file
Erro, impossível salvar ficheiro
- Load template
Carregar modelo
- Read error
Erro ao ler
- Error, could not read file
Erro, impossível ler ficheiro
- Composer error
Erro no compositor
- Error, could not create new composer
Erro, não foi possível criar um novo compositor
- Loading template into composer...
Carregando modelo para o compositor...
- Project contains WMS layers
Projeto contém camadas WMS
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
Alguns servidores WMS (e. g. UMN Mapserver) tem um limite para os parâmetros LARGURA e ALTURA. Ao imprimir camadas destes servidores, o limite pode ser excedido. Se for o caso, a camada WMS não será impressa
- Project contains composition effects
Projeto contêm efeitos de composição
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
Efeitos de compisição avançada, tais como blend modes ou transparência em camada vetorial estão ativos neste projeto, o qual não pode ser impresso com vetores. É recomendado imprimir como um raster.
- Print as raster
Imprimir como raster
- Landscape
Paisagem
@@ -17092,67 +17024,67 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
QgsComposerItemWidget
- Frame color changed
Cor da frame mudou
- Background color changed
Cor de fundo alterada
- Item position changed
Posição do item alterada
- Item outline width
Espessura do item
- Item frame join style
Estilo de união do item moldura
- Item frame toggled
Item da frame ativado
- Item background toggled
Item de fundo ativado
- Select background color
Selecionar a cor de fundo
- Select frame color
Selecione a cor da moldura
- Item blend mode changed
Modo de mistura alterado
- Item transparency changed
Transparência do item alterado
- Item id changed
ID do item alterado
- Item rotation changed
Rotação do item alterada
@@ -17165,115 +17097,104 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Opções Globais
- Position and size
Posição e tamanho
- Reference point
Ponto de referência
- X
X
- Y
Y
- Width
Largura
- Height
Altura
- Page
Página
- ...
- ...
-
-
- Rotation
Rotação
- °
°
- Frame
Moldura
- mm
mm
- Join style
Estilo da união
- Rendering
Renderização
- Blending mode
Modo de mistura
- Thickness
Espessura
- Color...
Cor...
- Background
Fundo
- Transparency
Transparência
- Item ID
ID do item
- Id
Id
@@ -17306,18 +17227,18 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Cor da etiqueta foi alterada
- Insert expression
Inserir expressão
- Label alignment changed
Alinhamento da etiqueta alterado
@@ -17423,8 +17344,9 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
QgsComposerLegend
+ Legend
- Legenda
+ Legenda
@@ -17589,12 +17511,12 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Grupo de legenda adicionado
- Map %1
Mapa %1
- None
Nenhum
@@ -18024,107 +17946,100 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
QgsComposerMap
- Map %1
Mapa %1
- Map will be printed here
O mapa será impresso aqui
-
- Grid %1
-
QgsComposerMapWidget
- Cache
Cache
- Render
Desenhar
- Rectangle
Rectângulo
- Solid
Sólido
- Cross
Cruz
- Markers
-
-
- Decimal
Decimal
- DegreeMinute
Grau e Minuto
- DegreeMinuteSecond
Grau, Minuto e Segundo
+ No frame
- Sem moldura
+ Sem moldura
- Zebra
Zebra
- Map scale changed
Escala do mapa alterada
- Map rotation changed
Rotação do mapa alterada
- Map extent changed
Extensão do mapa alterada
- Select font color
Selecionar a cor da fonte
@@ -18140,235 +18055,164 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Seleccione a cor de preenchimento da moldura da grelha
- Canvas items toggled
Alterados items do mapa
- None
Nenhum
- Overview frame style changed
Estilo da Moldura da Visão Global alterado
- Overview centering mode changed
Alterado o modo de centralização da Visão Global
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Unidade do mapa
-
-
- Millimeter
- Milímetro
-
-
- Centimeter
-
-
- change...
- alterar...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
Alterada a caixa de verificação da grelha
- Grid interval changed
Intervalo da grelha alterado
- Grid offset changed
Alterado offset da grelha
- Grid line style changed
Tipo de grelha alterado
- Grid type changed
Tipo de grelha alterado
+ Grid cross width changed
- Espessura da cruz da grelha alterada
+ Espessura da cruz da grelha alterada
- Annotation font changed
Fonte da anotação alterada
+ Label font changed
- Fonte da etiqueta alterada
+ Fonte da etiqueta alterada
- Annotation distance changed
Distância da anotação alterada
- Annotation format changed
Formato da anotação alterado
- Annotation toggled
Alterada a anotação
- Changed annotation precision
Precisão da anotação alterada
- Changed grid frame style
Estilo da moldura da grelha alterado
+ Changed grid frame width
- Largura da moldura da grelha alterada
+ Largura da moldura da grelha alterada
- Changed grid frame line thickness
Alterado a espessura da linha da moldura da grelha
- Grid frame color changed
Alterada a cor da moldura da grelha
- Grid frame first fill color changed
Alterada a primeira cor de preenchimento da moldura da grelha
- Grid frame second fill color changed
Alterada a segunda cor de preenchimento da moldura da grelha
- Inside frame
Dentro da moldura
- Outside frame
Fora da moldura
- Disabled
Desativado
- Horizontal
Horizontal
- Vertical
Vertical
- Annotation position changed
Posição da anotação alterada
- Changed annotation direction
Direcção da anotação alterada
- Map %1
Mapa %1
@@ -18381,377 +18225,287 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Opções do Mapa
- Map
Mapa
- Main properties
Propriedades principais
- Update preview
Atualizar pré-visualização
- Scale
Escala
- Map rotation
Rotação do Mapa
- Draw map canvas items
Desenhar itens do mapa
- Lock layers for map item
Bloquear camadas para o item do mapa
- Extents
Extensão
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
Definir a extensão do mapa
- X min
X min
- View extent in map canvas
Ver a extensão no enquadramento do mapa
- Controlled by atlas
Controlado pelo atlas
- Margin around feature
Margem à volta do elemento
- %
%
- Fixed scale
Escala fixa
- Use one of the predefined scales of the project where the atlas feature best fits.
Usar uma das escalas pré-definidas para o projecto onde o elemento do atlas se melhor ajusta.
- Predefined scale (best fit)
Escala pré-definida (melhor ajustamento)
+ Show grid
- Mostrar grelha
+ Mostrar grelha
+ Grid &type
- &Tipo de grelha
+ &Tipo de grelha
- Offset
Afastamento
- mm
mm
- Blend mode
Modo de mistura
- Interval
Intervalo
- Grid frame
Moldura da grelha
- Frame size
Tamanho da moldura
- Frame line thickness
Espessura da linha da moldura
- Color...
Cor...
- Frame fill colors
Cores de preenchimento da Moldura
- Marker style
- Estilo de marcadores
-
-
- Overview blending mode
Modo de mistura da visão global
- Invert overview
Inverter visão global
- Center on overview
Centrar na visão global
- X
X
- °
°
- Y
Y
- Cross width
Espessura do cruzamento
- Frame style
Estilo da moldura
- Line style
Estilo da linha
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Tipo de grelha
-
-
- CRS
- SRC
-
-
- change...
alterar...
- Interval units
-
-
- Map unit
- Unidade do mapa
-
-
- Millimeter
- Milímetro
-
-
- Centimeter
-
-
- No frame
- Sem moldura
-
-
- Zebra
- Zebra
-
-
- Draw coordinates
Desenhar coordenadas
- Format
Formato
- Left
Esquerda
- Right
Direita
- Top
Topo
- Bottom
Fundo
- Font
Fonte
- Font...
Fonte...
- Font color
- Cor da fonte
-
-
- Distance to map frame
Distância à moldura do mapa
- Coordinate precision
Precisão da coordenada
- Font color...
Cor da fonte...
- Overview
Visão Global
- Overview frame
Visão global da Moldura
- Overview style
Estilo de enquadramento
- Change...
Mudar...
@@ -18792,18 +18546,18 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
QgsComposerPicture
- Picture expression parsing error: %1
Erro de análise na expressão da imagem: %1
- Composer
Compositor
- Picture expression eval error: %1
Erro na avaliação da expressão de imagem: %1
@@ -18818,64 +18572,64 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Picture changed
Imagem alterada
- Expression based image path
Expressão baseada no caminho da imagem
- Picture rotation changed
Rotação da imagem alterada
- Select new preview directory
Seleciona nova pasta de pré-visualização
- Picture resize mode changed
Modo de redimensionamento da imagem alterado
- Picture placement changed
Posicionamento da Imagem alterado
- Picture source changed
Fonte da imagem alterada
- Picture source expression
Expressão da fonte da imagem
- Rotation synchronisation toggled
Alterada a sincronização da rotação
- Rotation map changed
Rotação do mapa alterada
- Map %1
Mapa %1
- Creating icon for file %1
Criando ícone para ficheiro %1
@@ -19042,32 +18796,32 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
QgsComposerScaleBar
- units
unidades
- km
km
- m
m
- miles
milhas
- ft
ft
- Nm
Mn
@@ -19076,38 +18830,38 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
QgsComposerScaleBarWidget
Single Box
Caixa simples
Double Box
Caixa dupla
Line Ticks Middle
Linhas tracejadas do meio
Line Ticks Down
Linhas tracejadas em baixo
Line Ticks Up
Linhas tracejadas em cima
Numeric
Numérico
@@ -19147,144 +18901,119 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Milhas Náuticas
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Selecionar a cor da fonte
-
-
- Select stroke color
-
-
- Map %1
Mapa %1
- Scalebar map changed
Escala gráfica do mapa alterada
- Scalebar line width
Espessura da linha da escala gráfica alterada
- Scalebar segment size
Tamanho do segmento da escala gráfica
- Scalebar segments left
Segmentos da escala à esquerda
- Number of scalebar segments changed
Número de segmentos da escala gráfica alterado
- Scalebar height changed
Altura da escala gráfica alterada
- Scalebar font changed
Tipo de letra da escala gráfica alterada
- Scalebar font color changed
Cor dos textos da escala gráfica alterada
- Scalebar color changed
Cor da escala gráfica alterada
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
Cor do traço da escala gráfica alterada
- Scalebar unit text
Texto das unidades da escala gráfica
- Scalebar map units per segment
Unidades do mapa por segmento da escala gráfica
- Scalebar style changed
Estilo da escala gráfica alterado
- Scalebar label bar space
Espaçamento dos textos da escala gráfica
- Scalebar box content space
Espaçamento da caixa de conteúdo da escala gráfica
- Scalebar alignment
Alinhamento da escala gráfica
- Scalebar changed to map units
Escala gráfica alterada para as unidades do mapa
- Scalebar changed to feet
Escala gráfica alterada para pés
- Scalebar changed to nautical miles
Escala gráfica alterada para milhas náuticas
- Scalebar changed to meters
Escala gráfica alterada para metros
- Scalebar line join style
Estilo de união da linha da escala gráfica
- Scalebar line cap style
Estilo do fim de linha da escala gráfica
@@ -19427,11 +19156,6 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Secondary fill color...
-
-
- Stroke color...
Cor do troço...
@@ -19441,37 +19165,37 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Ellipse
Elipse
Rectangle
Retângulo
Triangle
Triângulo
- Shape style changed
Estilo da forma alterado
- Shape radius changed
Alterado o raio da shape
- Shape type changed
Tipo de forma alterado
@@ -19882,107 +19606,107 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
QgsComposition
- Label added
Etiqueta adicionada
- Map added
Mapa adicionado
- Arrow added
Seta adicionada
- Scale bar added
Barra gráfica adicionada
- Shape added
Forma adicionada
- Picture added
Imagem adicionada
- Legend added
Legenda adicionada
- Table added
Tabela adicionada
- Aligned items left
Itens alinhados à esquerda
- Aligned items horizontal center
Itens alinhados no centro horizontal
- Aligned items vertical center
Itens alinhados no centro vertical
- Aligned items right
Itens alinhados à direita
- Aligned items top
Itens alinhados ao topo
- Aligned items bottom
Itens alinhados ao fundo
- Items locked
Itens bloqueados
- Items unlocked
Itens desbloqueados
- Item z-order changed
Item z-ordem alterado
- Remove item group
Remover grupo de itens
- Frame deleted
Moldura apagada
- Item deleted
Item apagado
- Multiframe removed
Multiframe removida
@@ -20039,148 +19763,148 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Landscape
Paisagem
Portrait
Retrato
Map %1
Mapa %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A1 (594x841 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (21.59x35.56 cm)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Carta; 21.59x27.94 cm)
- ANSI B (Tabloid; 11x17 in)
ANSI B(Tablóide; 27.94x43.18 cm)
- ANSI C (17x22 in)
ANSI C (43.18x55.88 cm)
- ANSI D (22x34 in)
ANSI D (55.88x 86.36 cm)
- ANSI E (34x44 in)
ANSI E (86.36x 111.76 cm)
- Arch A (9x12 in)
Arch A (22.86x30.48 cm)
- Arch B (12x18 in)
Arch B (30.48x45.72 cm)
- Arch C (18x24 in)
Arch C (45.72x60.96 cm)
- Arch D (24x36 in)
Arch D (60.96x91.44 cm)
- Arch E (36x48 in)
Arch E (91.44x121.92 cm)
- Arch E1 (30x42 in)
Arch E1 (76.2x106.68 cm)
- Custom
Personalizado
@@ -20198,131 +19922,109 @@ Por favor, tente uma resolução mais baixa ou um tamanho de papel mais pequeno<
Papel e qualidade
- Presets
Tamanho
- ...
- ...
-
-
- Width
Largura
- Height
Altura
- Units
Unidades
- Number of pages
Número de páginas
- Orientation
Orientação
- Export resolution
Resolução de exportação
- Print as raster
Imprimir como raster
-
- Snap tolerance
- Tolerância de atração
-
-
- px
- px
-
Change...
Alterar...
- Page background
Fundo da Página
+ Grid
- Grelha
+ Grelha
- dpi
dpi
- World file on
Ficheiro World em
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
Offset da Grelha
- x:
x:
- y:
y:
+ Spacing
- Espaçamento
+ Espaçamento
+ Snap to alignments
- Coincidir com os alinhamentos
+ Coincidir com os alinhamentos
+ Tolerance
- Tolerância
+ Tolerância
@@ -21497,7 +21199,7 @@ e o ficheiro atual é [%3]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23236,7 +22938,7 @@ Deixe vazio para automaticamente aplicar o valor máximo.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
Não foi possível definir coluna '%1' como coluna de pré-visualização.
@@ -23565,7 +23267,7 @@ Erro de análise:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23579,7 +23281,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24682,7 +24384,7 @@ MyForms.py deve existir na PYTHONPATH, .qgis/python, ou na pasta do projecto.<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -25993,7 +25695,7 @@ Volte a seleccionar um ficheiro válido.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -26945,17 +26647,17 @@ p, li { white-space: pre-wrap; }
QgsGraduatedSymbolRendererV2Model
- Symbol
Símbolo
- Value
Valor
- Label
Etiqueta
@@ -27048,41 +26750,41 @@ p, li { white-space: pre-wrap; }
Avançado
- Symbol levels...
Níveis de símbolos...
- Error
Erro
- There are no available color ramps. You can add them in Style Manager.
Não existem rampas de cores disponíveis. Pode adicioná-las no Gestor de Estilos.
- The selected color ramp is not available.
A escala de cor selecionada não está disponível.
- Warning
Aviso
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
Classificação de quebras naturais (Jenks) é O(n2) complexo, a sua classificação poderá durar mais tempo.
Pressione cancelar para abortar o cálculo das quebras ou OK para continuar.
- Renderer creation has failed.
Criação de renderização falhou.
@@ -27266,10 +26968,7 @@ Pressione cancelar para abortar o cálculo das quebras ou OK para continuar.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- Você tem certeza que deseja excluir %n a camada seleccionada?
- Você tem certeza que deseja excluir %n as camadas seleccionadas?
-
+ Você tem certeza que deseja excluir %n a camada seleccionada? Você tem certeza que deseja excluir %n as camadas seleccionadas?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29025,7 +28724,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29064,7 +28763,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29138,7 +28837,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29905,10 +29604,7 @@ na linha %2 coluna %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- Existe %n uma camada não tratada, que será perdida se fechar agora.
- Existem %n camadas não tratadas, que serão perdidas se fechar agora.
-
+ Existe %n uma camada não tratada, que será perdida se fechar agora. Existem %n camadas não tratadas, que serão perdidas se fechar agora.
@@ -30038,13 +29734,10 @@ na linha %2 coluna %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- Esgotou o tempo de ligação após %n segundos de inatividade.
+ Esgotou o tempo de ligação após %n segundos de inatividade.
Pode ser um problema na sua ligação ou no servidor WMS.
-
- Rede esgotou o tempo após %n segundos de inatividade.
-Isto pode ser um problema em sua conexão ou no servidor WMS.
- Rede esgotou o tempo após %n segundos de inatividade.
+Isto pode ser um problema em sua conexão ou no servidor WMS.
@@ -31239,7 +30932,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Configurações de etiqueta de camada
- Label this layer with
Rotular esta camada com
@@ -31319,22 +31012,22 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
...
...
@@ -31390,7 +31083,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Múltiplas linhas
- Automated placement settings (apply to all layers)
Configurações de posicionamento automatizadas (aplicam-se a todas as camadas)
@@ -31420,7 +31113,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Rendering
Renderização
@@ -31508,7 +31201,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Alignment
Alinhamento
@@ -31545,7 +31238,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Repetir
- Discourage labels from covering features
Desencorajar os rótulos de cobrir elementos
@@ -31640,82 +31333,82 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Buffer
- Labels will not show if larger than this on screen
As etiquetas não serão visualizadas no ecrã se forem maiores que estas
- px
px
- Data defined
Definido por dados
- X
X
- Y
Y
- Coordinate
Coordenada
- Preserve data rotation values
Preservar valores de rotação dos dados
- horizontal
horizontal
- vertical
vertical
- Label options
Opções de etiqueta
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
Valor < 0 representa uma escalar mais próxima do que 1:1, ex. -10 = 10:1.<br>Valor de 0 desativa o limite específico.
- Maximum
Máximo
- Pixel size-based visibility (labels in map units)
Visibilidade baseada no tamanho pixel (rótulo em unidades do mapa)
- Labels will not show if smaller than this on screen
As etiquetas não serão visualizadas no ecrã se forem menores que estas
- Minimum
Mínimo
@@ -31725,7 +31418,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
<
- Scale-based visibility
Visibilidade baseada na escala
@@ -31763,17 +31456,17 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Direção inversa
- Priority
Prioridade
- Low
Baixa
- High
Alta
@@ -31926,7 +31619,7 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Rotation
Rotação
@@ -31978,17 +31671,17 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Distância
- outside
fora
- inside
dentro
- Maximum angle between curved characters
Ângulo máximo entre caracteres curvos
@@ -32094,62 +31787,62 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
unidades do símbolo
- Merge connected lines to avoid duplicate labels
Fundir linhas conetadas para evitar etiquetas duplicadas
- Label every part of multi-part features
Rotular cada parte dos elementos com múltiplas partes
- Feature options
Opções para elementos
- Suppress labeling of features smaller than
Omitir rotulagem de elementos menores que
- mm
mm
- Show all labels for this layer (including colliding labels)
Mostras todas as etiquetas para esta camada (incluindo etiquetas em colisão)
- Show upside-down labels
Mostrar etiquetas de cabeça para baixo
- never
nunca
- when rotation defined
quando rotação definida
- always
sempre
- Limit number of features to be labeled to
Limite o número de elementos a rotular
- Number of features sent to labeling engine, though not all may be labeled
Número de elementos enviados para o motor de rotulagem, embora nem todos possam ser rotulados
@@ -32159,17 +31852,17 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
Posição
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
Desmarque a opção de escrita motor rotulagem rotação derivados no pino e NULL em unpin
- Always show
Mostrar sempre
- Show label
Mostrar etiqueta
@@ -32185,12 +31878,12 @@ Isto pode ser um problema em sua conexão ou no servidor WMS.
QgsLayerTreeModel
- Double-click to view legend
Duplo clique na legenda
- following %1 items
not displayed
os seguintes itens %1
@@ -32248,12 +31941,12 @@ não são exibidos
QgsLegendModel
- Group
Agrupar
- No Legend Available
Não existe legenda disponível
@@ -32481,18 +32174,18 @@ não são exibidos
QgsMapCanvas
- canvas
janela
- Rendering
Renderização
- Canvas refresh: %1 ms
Actualização da janela:%1 ms
@@ -33677,10 +33370,7 @@ não são exibidos
%n more
unread messages
-
- %n
- %n mais
-
+ %n %n mais
@@ -33817,7 +33507,7 @@ não são exibidos
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
Falha na conexão - O nome do host não foi especificado.
@@ -33826,7 +33516,7 @@ não são exibidos
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
Falha na conexão - O nome da base de dados não foi especificado.
@@ -35378,10 +35068,7 @@ Informação de erro estendida:
Coordinate Reference System (%n available)
crs count
-
- Sistema de Referência de Coordenadas (%n disponível)
- Sistema de Referência de Coordenadas (%n disponíveis)
-
+ Sistema de Referência de Coordenadas (%n disponível) Sistema de Referência de Coordenadas (%n disponíveis)
Solid
Sólido
Dots
Pontos
Crosses
Cruzes
- Detected active locale on your system: %1
Idioma ativo detectado no seu sistema: %1
- To vertex
Ao vértice
- To segment
Ao segmento
- To vertex and segment
Ao vértice e segmento
- map units
unidades de mapa
- pixels
Pixels
- Semi transparent circle
Círculo semi-transparente
- Cross
Cruz
- None
Nenhum
- QGIS files
Ficheiros QGIS
- Off
Off
- QGIS
QGIS
- GEOS
GEOS
- Round
Arredondado
- Mitre
Pontiaguda
- Bevel
Chanfrado
- Save default project
Guardar projeto padrão
- You must set a default project
Deve escolher um projeto padrão
- Current project saved as default
Projeto atual guardado como padrão
- Error saving current project as default
Erro ao guardar o projeto atual como padrão
- Choose a directory to store project template files
Escolher uma pasta para guardar os ficheiros de modelo do projeto
@@ -36507,105 +36194,105 @@ Sempre rede: Carrega sempre a partir de rede e não verifica se a cache tem uma
Mostrar elementos visiveis no mapa
- Choose project file to open at launch
Escolha o ficheiro de projeto a abrir no lançamento
- Create Options - %1 Driver
Opções para criar - %1 Driver
- Create Options - pyramids
Opções para criar - pirâmidas
- Restore UI defaults
Restaurar os padrões UI
- Are you sure to reset the UI to default (needs restart)?
Tem a certeza que quer reverter o UI para o seu estado original (necessita reiniciar)?
- Overwrite
Actualizar
- If Undefined
Se definido
- Unset
Indefinido
- Prepend
Prefixar
- Append
Acrescentar
- Choose a directory
Escolha uma pasta
- Enter scale
Insira escala
- Scale denominator
Denominador de escala
- Load scales
Carregar escalas
- XML files (*.xml *.XML)
Ficheiros XML (*.xml *.XML)
- Save scales
Salvar escalar
- No Stretch
Sem esticar
- Stretch To MinMax
Estender para MinMax
- Stretch And Clip To MinMax
Estender e cortar para MinMax
- Clip To MinMax
Cortar para MinMax
@@ -36625,7 +36312,7 @@ Sempre rede: Carrega sempre a partir de rede e não verifica se a cache tem uma
General
Geral
@@ -36808,7 +36495,7 @@ Sempre rede: Carrega sempre a partir de rede e não verifica se a cache tem uma
...
...
@@ -36924,7 +36611,7 @@ Sempre rede: Carrega sempre a partir de rede e não verifica se a cache tem uma
Remove
Remove
@@ -36932,7 +36619,7 @@ Sempre rede: Carrega sempre a partir de rede e não verifica se a cache tem uma
Add
Adiciona
@@ -37192,22 +36879,7 @@ Sempre rede: Carrega sempre a partir de rede e não verifica se a cache tem uma
Largura mínima na linha/ no contorno em milímetros.
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
Suprimir balão de formulário de atributos depois da criação do elemento
@@ -37504,18 +37176,22 @@ Sempre rede: Carrega sempre a partir de rede e não verifica se a cache tem uma
Cor...
+ Grid defaults
- Grelha padrão
+ Grelha padrão
+ Spacing
- Espaçamento
+ Espaçamento
mm
mm
@@ -37536,370 +37212,372 @@ Sempre rede: Carrega sempre a partir de rede e não verifica se a cache tem uma
Snap tolerance
Tolerância de atração
+ Guide defaults
- Guia padrão
+ Guia padrão
- Feature creation
Criação do Elemento
- Validate geometries
Validar geometrias
- Reuse last entered attribute values
Reutilizar últimos valores de atributos inseridos
- Rubberband
Borracha
- Line color
Cor da linha
- Line width in pixels
Espessura da linha em pixels
- Line width
Espessura da linha
- Snapping
Ajuste
- Default snap mode
Modo de atração padrão
- Default snapping tolerance
Tolerância de snapping pré-definida
- Search radius for vertex edits
Raio de pesquisa para editar vértice
- map units
unidades de mapa
pixels
pixels
- Open snapping options in a dock window (QGIS restart required)
Abrir opções de snapping numa janela (necessário reiniciar o QGIS)
- Vertex markers
Marcadores de vértice
- Marker style
Estilo de marcadores
- Marker size
Tamanho do marcador
- Show markers only for selected features
Mostrar marcadores apenas para elementos selecionados
- Curve offset tool
Ferramenta de Curva de Afastamento
- Miter limit
Miter limite
- Join style
Estilo da união
- Quadrant segments
Segmentos de quadrante
- GDAL driver options
Opções do controlador GDAL
- Edit Pyramids Options
Editar opções de Pirâmides
- Edit Create Options
Editar Criar Opções
- GDAL drivers
Controladores GDAL
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
Em alguns casos mais de um controlador GDAL pode ser usado para ler o mesmo formato raster. Utilize a lista abaixo para especificar o que vai usar.
- Name
Nome
- ext
ext
- Flags
Flags
- Description
Descrição
- CRS for new layers
SRC para novas camadas
- Select...
Selecione...
- Use &project CRS
Utilizar SRC &projecto
- Prompt for &CRS
Prompt para SR&C
- Use default CRS displa&yed below
Utlilize SRC padrão mos&trado abaixo
- When a new layer is created, or when a layer is loaded that has no CRS
Quando uma nova camada é criada, ou quando uma camada é carregada e não tem SRC (Sistema de Referência de Coordenadas)
- Default CRS for new projects
SRC predefinido para novos projetos
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
Habilitar automaticamente reprojeção 'on the fly' se o SRC da nova camada adicionada for diferente do SRC da(s) camada(s) presente(s). O SRC da(s) presente(s) camada(s) será utilizado.
- Automatically enable 'on the fly' reprojection if layers have different CRS
Habilitar automaticamente a reprojeção 'on the fly' se as camadas tiverem diferentes SRC
- Always start new projects with this CRS
Inicie sempre um novo projecto com este SRC
- Enable 'on the &fly' reprojection by default
Habilita reprojeção 'on the &fly' por defeito
- Don't enable 'on the fly' reprojection
Não activar a reprojecção 'on the fly'
- Default datum transformations
Transformações de datum padrão
- Source CRS
SRC Fonte
- Destination CRS
SRC de Destino
- Source datum transform
Origem da transformação de datum
- Destination datum transform
Destino da transformação de datum
- Ask for datum transformation when no default is defined
Perguntar pela transformação de datum quando não for defenido um padrão
- Override system locale
Sobrepor idioma do sistema
- Locale to use instead
Idioma a utilizar em alternativa
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>Nota:</b> Habilitar / trocar a região requer reiniciar a aplicação
- Additional Info
Informação adicional
- Detected active locale on your system:
Região ativa detetada no seu sistema:
- WMS search address
Pesquisa de endereço WMS
- Timeout for network requests (ms)
Tempo esgotado para pedidos de rede (ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
Período padrão de validade para quadrículas WMS-C/WMTS (horas)
- Max retry in case of tile request errors
Tentativa Máxima em caso de erros de tentativas de pedido
- User-Agent
Utilizador-Agente
- Cache settings
Configurações da cache
- Directory
Pasta
- Size [KiB]
Tamanho [KiB]
- Clear
Limpar
- Use proxy for web access
Usar proxy para aceder a web
- Host
Máquina
- Port
Porta
- User
Utilizador
- Leave this blank if no proxy username / password are required
Deixe em branco se o utilizador / palavra-passe não é obrigatório no proxy
- Password
Palavra-passe
- Proxy type
Tipo de proxy
- Exclude URLs (starting with)
Excluir URLs (iniciar com)
@@ -39877,7 +39555,7 @@ Erro: %2
O módulo desapareceu
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
O módulo parece ter sido instalado, mas não é possíver saber onde. Provavelmente, o pacote contém um nome de pasta errado.
Procure a lista de módulos instalados. Quase de certeza que você vai encontrar o módulo lá, mas não é possível determinar qual deles é. Isso também significa que não é possível determinar se este módulo está instalado e informá-lo sobre atualizações disponíveis. No entanto, o módulo pode trabalhar. Entre em contato com o seu autor e comunique-o sobre esse problema.
@@ -40600,7 +40278,7 @@ Você precisa reiniciar o QGIS para recarregá-lo.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40618,7 +40296,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -40636,7 +40314,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -41498,156 +41176,156 @@ Escolha ignorar para continuar a carregar sem as camadas perdidas. Escolha cance
QgsProjectProperties
- Layer
Camada
- Type
Tipo
- Identifiable
Identificável
- Vector
Vetor
- WMS
WMS
- Raster
Raster
- Coordinate System Restriction
Restrição de Sistema de Coordenadas
- No coordinate systems selected. Disabling restriction.
Não há sistema de coordenadas selecionado. Desactivando restrição.
- Selection color
Cor da selecção
- Measure tool (CRS transformation: %1)
Ferramenta de medição (transformação SRC:%1)
- Canvas units (CRS transformation: %1)
Unidades do ecrã (transformação SRC: %1)
+ OFF
Desligado
+ ON
Ligado
- CRS %1 was already selected
SRC %1 já foi selecionado
- Coordinate System Restrictions
Restrições do Sistema de Coordenadas
- The current selection of coordinate systems will be lost.
Proceed?
O sistema de coordenadas corrente será perdido.
Proceder?
- Select print composer
Selecione compositor de impressão
- Composer Title
Compositor de título
- Select restricted layers and groups
Selecione as camadas e grupos restritos
- Enter scale
Entrar escala
- Scale denominator
Denominador de escala
- Load scales
Carregar escalas
- XML files (*.xml *.XML)
Ficheiros XML (*.xml *.XML)
- Save scales
Salvar escalas
- Select a valid symbol
Selecione um símbolo válido
- Invalid symbol :
Símbolo inválido :
- Parameters:
Parâmetros:
+ Select %1 from pull-down menu to adjust radii
Selecionar %1 a partir do menu pull-down para ajustar raios
- Can only use ellipsoidal calculations when CRS transformation is enabled
Pode-se usar calculos elipsoidais apenas quando a transformação SRC está habilitada
@@ -41672,7 +41350,6 @@ Proceder?
Project title
Título do Projeto
@@ -41712,37 +41389,37 @@ Proceder?
Salvar caminhos
- Measure tool
Ferramenta de medida
- Semi-minor
Semi-menor
- Semi-major
Semi-maior
- Used when CRS transformation is turned off
Usado quando transformação de SRC é desligado
- Canvas units
Unidades do ecrã
- Meters
Metros
- Feet
Pés
@@ -41774,98 +41451,98 @@ Proceder?
Servidor OWS
- Ellipsoid
(for distance calculations)
Elipsoide
(para cálculos de distância)
- Degree
Graus
- Degree display
Visualização de graus
- Decimal degrees
Graus Decimais
- Degrees, Minutes
Graus, Minutos
- Degrees, Minutes, Seconds
Graus, Minutos, Segundos
- Precision
Precisão
- Automatically sets the number of decimal places in the mouse position display
Ajustar automaticamente o número de casas decimais na posição (geográfica) mostrada pelo rato
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
O número de casas decimais usadas para mostrar a posição (geográfica) do rato é automaticamente ajustada de forma a ser suficientemente, dessa forma, ao mover o rato por um pixel, resulta na mudança da posição apresentada
- Automatic
Automático
- Sets the number of decimal places to use for the mouse position display
Ajusta o número de casas decimais que mostrarão a posição (geográfica) do rato
- Manual
Manual
- The number of decimal places for the manual option
O número de casas decimais para a opção manual
- decimal places
casas decimais
- Project scales
Escalas do projeto
- ...
...
- Enable 'on the fly' CRS transformation
Ativar transformação SRC "on the fly"
@@ -41875,69 +41552,69 @@ Proceder?
Camadas identificáveis
- Project layers
Camadas do projecto
- Layer
Camada
- Type
Tipo
- Identifiable
Identificável
- Marker
Marcador
- Line
Linha
- Default symbols
Símbolos por defeito
- Fill
Preenchimento
- Color Ramp
Rampa de cor
- Transparency
Transparência
- %
.%
- Style Manager
Gestor de Estilos
- Options
Opções
@@ -41947,170 +41624,165 @@ Proceder?
Relações
- Project file
- Ficheiro do projecto
-
-
- Nautical miles
Milhas náuticas
- Assign random colors to symbols
Atribuir cores aleatórias aos símbolos
- Service capabilities
Capacidades do serviço
- Person
Pessoa
- Title
Título
- Organization
Organização
- Online resource
Recurso online
- E-Mail
E-mail
- Phone
Telefone
- Abstract
Resumo
- Fees
Taxa
- Access constraints
Restrições de acesso
- Keyword list
Lista de palavras reservadas
- WMS capabilities
Capacidades WMS
- Add geometry to feature response
Adicionar geometria ao elemento de resposta
- Min. X
Min. X
- Min. Y
Min. Y
- Max. X
Max. X
- Max. Y
Max. Y
- Use Current Canvas Extent
Usar extensão atual do mapa
- Used
Usado
- Exclude composers
Excluir compositores
- WFS capabilities
Capacidades WFS
- WCS capabilities
Capacidades WCS
- Exclude layers
Excluir camadas
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
Qualidade para as imagens JPEG ( 10 : imagem mais pequena - 100 : maior qualidade )
- Published
Publicado
- Update
Atualizar
- Insert
Inserir
- Delete
Apagar
- Unselect all
Desmarcar tudo
- Select all
Selecionar tudo
@@ -42121,39 +41793,39 @@ Proceder?
Macros
- Advertised URL
URL anunciado
- Width
Largura
- Height
Altura
- Maximums for GetMap request
máximos para pedidos GetMap
- Advertised extent
Extensão anunciada
- CRS restrictions
Restrições SRC
- Python macros
Macros Python
@@ -42267,10 +41939,7 @@ Por este motivo, o seletor de projeção não irá funcionaro...
The where clause returned %n row(s).
returned test rows
-
- A cláusula Where retornou %n linha.
- A cláusula Where retornou %n linhas.
-
+ A cláusula Where retornou %n linha. A cláusula Where retornou %n linhas.
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42343,7 +42012,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42354,7 +42023,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -42370,7 +42039,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -44034,7 +43703,7 @@ Clique no botão de ajuda para obter opções válidas de criação para este fo
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -45113,10 +44782,7 @@ desvio padrão ×
Filter returned %n feature(s)
number of filtered features
-
- %n elemento filtrado
- %n elemento(s) filtrados
-
+ %n elemento filtrado %n elemento(s) filtrados
@@ -45805,10 +45471,7 @@ desvio padrão ×
Found %n matching feature(s).
test result
-
- Encontrado %n elemento correspondente.
- Encontrados %n elemento(s) correspondentes.
-
+ Encontrado %n elemento correspondente. Encontrados %n elemento(s) correspondentes.
Validation finished (%n error(s) found).
number of geometry errors
-
- Validação terminada (%n erro encontrado).
- Validação terminada (%n erros encontrados).
-
+ Validação terminada (%n erro encontrado). Validação terminada (%n erros encontrados).
%n selected geometries
selected geometries
-
- %n geometria selecionada
- %n geometrias selecionadas
-
+ %n geometria selecionada %n geometrias selecionadas
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47355,7 +47012,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47968,8 +47625,8 @@ Você deseja sobrepor a [%2] relação?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -48006,124 +47663,152 @@ p, li { white-space: pre-wrap; }
QgsSqlAnywhereProvider
+ Failed to load interface
- Falha a carregar interface
+ Falha a carregar interface
+ Failed to connect to database
- Falha na conexão à base de dados
+ Falha na conexão à base de dados
+ A connection to the SQL Anywhere database cannot be established.
- A conexão com a base de dados SQL Anywhere não pode ser estabelecida.
+ A conexão com a base de dados SQL Anywhere não pode ser estabelecida.
+ No suitable key column
- Nenhuma coluna chave adequada
+ Nenhuma coluna chave adequada
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- A relação fonte %1 não tem nenhuma coluna adequada para utilização como chave única.
+ A relação fonte %1 não tem nenhuma coluna adequada para utilização como chave única.
QGIS rquer que a relação tenha uma coluna de número inteiro inferior a 32 bits contendo valores únicos.
+ Error loading attributes
- Erro ao carregar atributos
+ Erro ao carregar atributos
+ Ambiguous field!
- Campo ambíguo!
+ Campo ambíguo!
+ Duplicate field %1 found
- Encontrado campo duplicado %1
+ Encontrado campo duplicado %1
+ Read attempt on an invalid SqlAnywhere data source
- Tentativa de leitura de um fonte de dados SQLAnywhere inválida
+ Tentativa de leitura de um fonte de dados SQLAnywhere inválida
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- Erro ao inserir elementos
+ Erro ao inserir elementos
+ Error deleting features
- Erro ao apagar os elementos
+ Erro ao apagar os elementos
+ Error adding attributes
- Erro ao adicionar atributos
+ Erro ao adicionar atributos
+ Error deleting attributes
- Erro ao apagar atributos
+ Erro ao apagar atributos
+ Attribute not found
- Atributo não encontrado
+ Atributo não encontrado
+ Error updating attributes
- Erro ao atualizar atributos
+ Erro ao atualizar atributos
+ Error updating features
- Erro ao atualizar elementos
+ Erro ao atualizar elementos
+ Error verifying geometry column %1
- Erro ao verificar a geometria das colunas %1
+ Erro ao verificar a geometria das colunas %1
+ Unknown geometry type
- Tipo de geometria desconhecida
+ Tipo de geometria desconhecida
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- Coluna %1 tem um tipo de geometria %2, que o QGIS não suporta atualmente.
+ Coluna %1 tem um tipo de geometria %2, que o QGIS não suporta atualmente.
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- Coluna %1 não está restrita a um único SRID, que o QGIS requer.
+ Coluna %1 não está restrita a um único SRID, que o QGIS requer.
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- Uma vez o QGIS suportar apenas dados planos, o fornecedor de dados SQL Anywhere irá tentar transformar os dados para uma projecção planar compatível (SRID=%1).
+ Uma vez o QGIS suportar apenas dados planos, o fornecedor de dados SQL Anywhere irá tentar transformar os dados para uma projecção planar compatível (SRID=%1).
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- Uma vez o QGIS suportar apenas dados planos e não foi encontrado uma projecção plana compatível, o fornecedor de dados SQL Anywhere irá tentar transformar os dados para WGS 84 planar (SRID=%1).
+ Uma vez o QGIS suportar apenas dados planos e não foi encontrado uma projecção plana compatível, o fornecedor de dados SQL Anywhere irá tentar transformar os dados para WGS 84 planar (SRID=%1).
+ Mixed Spatial Reference Systems
- Sistemas de Referência Espacial misto
+ Sistemas de Referência Espacial misto
+ Error checking database ReadOnly property
- Erro ao verificar a base de dados com propriedade ReadOnly
+ Erro ao verificar a base de dados com propriedade ReadOnly
+ Error loading SRS definition
- Erro ao carregar as definições SRS
+ Erro ao carregar as definições SRS
+ Limited Support of Round Earth SRS
- Suporte limitado de Round Earth SRS
+ Suporte limitado de Round Earth SRS
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- Coluna %1 (%2) contém geometrias que pertencem a um sistema de referência espacial de terra redonda (SRID=%3). %4
+ Coluna %1 (%2) contém geometrias que pertencem a um sistema de referência espacial de terra redonda (SRID=%3). %4
Actualizações para valores de geometria será descativado, e desempenho da consulta pode ser baixo, porque os índices espaciais não serão utilizados. Para melhorar o desempenho, considere a criação de um índice espacial em uma coluna (possivelmente calculado) contendo uma nova projeção plana dessas geometrias. Para obter ajuda, consulte as descrições dos métodos ST_SRID(INT) e ST_Transform(INT) na documentação do SQL Anywhere.
@@ -48258,14 +47943,14 @@ Actualizações para valores de geometria será descativado, e desempenho da con
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Símbolo com o nome '%1' já existe.
Substituir?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Rampa de cores com o nome '%1' já existe.
Substituir?
@@ -49397,7 +49082,7 @@ Foi detectado um problema com a sua base de dados de símbolo.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -50173,37 +49858,25 @@ Erro:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- SUCESSO: %n atributo eliminado.
- SUCESSO: %n atributos eliminados.
-
+ SUCESSO: %n atributo eliminado. SUCESSO: %n atributos eliminados.
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- ERRO: %n atributo não eliminado.
- ERRO: %n atributos não eliminados.
-
+ ERRO: %n atributo não eliminado. ERRO: %n atributos não eliminados.
SUCCESS: %n attribute(s) added.
added attributes count
-
- SUCESSO: %n atributo adicionado.
- SUCESSO: %n atributos adicionados.
-
+ SUCESSO: %n atributo adicionado. SUCESSO: %n atributos adicionados.
ERROR: %n new attribute(s) not added
not added attributes count
-
- ERRO: %n novo atributo não adicionado
- ERRO: %n novos atributos não adicionados
-
+ ERRO: %n novo atributo não adicionado ERRO: %n novos atributos não adicionados
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- SUCESSO: %n valor de atributo modificado.
- SUCESSO: %n valores de atributo modificados.
-
+ SUCESSO: %n valor de atributo modificado. SUCESSO: %n valores de atributo modificados.
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- ERRO: %n mudança de valor de atributo não aplicado.
- ERRO: %n mudanças de valor de atributo não aplicados.
-
+ ERRO: %n mudança de valor de atributo não aplicado. ERRO: %n mudanças de valor de atributo não aplicados.
SUCCESS: %n feature(s) deleted.
deleted features count
-
- SUCESSO: %n funcionalidade eliminada.
- SUCESSO: %n elemento(s) eliminados.
-
+ SUCESSO: %n funcionalidade eliminada. SUCESSO: %n elemento(s) eliminados.
ERROR: %n feature(s) not deleted.
not deleted features count
-
- ERRO: %n funcionalidade não eliminada.
- ERRO: %n elemento(s) não eliminados.
-
+ ERRO: %n funcionalidade não eliminada. ERRO: %n elemento(s) não eliminados.
SUCCESS: %n feature(s) added.
added features count
-
- SUCESSO: %n elemento adicionado.
- SUCESSO: %n elemento(s) adicionados.
-
+ SUCESSO: %n elemento adicionado. SUCESSO: %n elemento(s) adicionados.
ERROR: %n feature(s) not added.
not added features count
-
- ERRO: %n elemento não adicionado.
- ERRO: %n elemento(s) não adicionados.
-
+ ERRO: %n elemento não adicionado. ERRO: %n elemento(s) não adicionados.
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- ERRO: %n elemento não adicionado - fornecedor não suporta a adição de elementos.
- ERRO: %n elemento(s) não adicionados - fornecedor não suporta a adição de elementos.
-
+ ERRO: %n elemento não adicionado - fornecedor não suporta a adição de elementos. ERRO: %n elemento(s) não adicionados - fornecedor não suporta a adição de elementos.
SUCCESS: %n geometries were changed.
changed geometries count
-
- SUCESSO: %n geometria foi modificada.
- SUCESSO: %n geometrias foram modificadas.
-
+ SUCESSO: %n geometria foi modificada. SUCESSO: %n geometrias foram modificadas.
ERROR: %n geometries not changed.
not changed geometries count
-
- ERRO: %n geometria não modificada.
- ERRO: %n geometrias não modificadas.
-
+ ERRO: %n geometria não modificada. ERRO: %n geometrias não modificadas.
Options (%n coordinate reference systems available)
crs count
-
- Opções (%n sistema de referência de coordenadas disponível)
- Opções (%n sistema de referência de coordenadas disponíveis)
-
+ Opções (%n sistema de referência de coordenadas disponível) Opções (%n sistema de referência de coordenadas disponíveis)
Coordinate Reference System (%n available)
crs count
-
- Sistema de Referência de Coordenadas (%n disponível)
- Sistema de Referência de Coordenadas (%n disponíveis)
-
+ Sistema de Referência de Coordenadas (%n disponível) Sistema de Referência de Coordenadas (%n disponíveis)
%n Layer(s) selected
selected layer count
-
- %n Camada selecionada
- %n Camadas selecionadas
-
+ %n Camada selecionada %n Camadas selecionadas
(and %n more)
crs
-
- (e %n mais)
- (e %n mais)
-
+ (e %n mais) (e %n mais)
%n tile requests in background
tile request count
-
- %n pedido de quadrículas no fundo
- %n pedidos de quadrículas no fundo
-
+ %n pedido de quadrículas no fundo %n pedidos de quadrículas no fundo
, %n cache hits
tile cache hits
-
- , %n acerto no cache
- , %n acertos no cache
-
+ , %n acerto no cache , %n acertos no cache
, %n cache misses.
tile cache missed
-
- , %n erro no cache.
- , %n erros no cache.
-
+ , %n erro no cache. , %n erros no cache.
, %n errors.
errors
-
- , %n erro.
- , %n erros.
-
+ , %n erro. , %n erros.
(and %n more)
crs
-
- (e %n mais)
- (e %n mais)
-
+ (e %n mais) (e %n mais)
%n missing row(s)
-
- %n linha(s) em falta
- %n linha(s) em falta
-
+ %n linha(s) em falta %n linha(s) em falta
%n missing column(s)
-
- %n coluna(s) em falta
- %n coluna(s) em falta
-
+ %n coluna(s) em falta %n coluna(s) em falta
%n tile requests in background
tile request count
-
- %n pedido de mosaico no fundo
- %n pedidos de mosaicos no fundo
-
+ %n pedido de mosaico no fundo %n pedidos de mosaicos no fundo
, %n cache hits
tile cache hits
-
- , %n acerto no cache
- , %n acertos no cache
-
+ , %n acerto no cache , %n acertos no cache
, %n cache misses.
tile cache missed
-
- , %n falha no cache.
- , %n falhas no cache.
-
+ , %n falha no cache. , %n falhas no cache.
, %n errors.
errors
-
- , %n erro.
- , %n erros.
-
+ , %n erro. , %n erros.
SaDbTableModel
+ Schema
- Esquema
+ Esquema
+ Table
- Tabela
+ Tabela
+ Type
- Tipo
+ Tipo
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretação da linha
+ Interpretação da linha
+ Geometry column
- Geometria da Coluna
+ Geometria da Coluna
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Salvar ligação
+ Salvar ligação
+ Should the existing connection %1 be overwritten?
- Deve a ligação existente %1 ser sobrescrita?
+ Deve a ligação existente %1 ser sobrescrita?
+ Failed to load interface
- Falha ao carregar a interface
+ Falha ao carregar a interface
+ Test connection
- Testar ligação
+ Testar ligação
+ Connection to %1 was successful
- Ligação com '%1' com sucesso
+ Ligação com '%1' com sucesso
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Ligação falhou - Verifique as configurações e tente novamente.
+ Ligação falhou - Verifique as configurações e tente novamente.
Código de erro SQL Anywhere:%1
Descrição: %2
@@ -53607,276 +53222,348 @@ Descrição: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Criar uma nova ligação SQL Anywhere
+ Criar uma nova ligação SQL Anywhere
+ Connection Information
- Dados da conexão
+ Dados da conexão
+ Name
- Nome
+ Nome
+ Host
- Máquina
+ Máquina
+ Port
- Porta
+ Porta
+ Server
- Servidor
+ Servidor
+ Database
- Base de dados
+ Base de dados
+ Connection Parameters
- Parâmetros da ligação
+ Parâmetros da ligação
+ Username
- Utilizador
+ Utilizador
+ Password
- Palavra-passe
+ Palavra-passe
+ Name of the new connection
- Nome da nova ligação
+ Nome da nova ligação
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Nome ou endereço IP do computador que hospeda o servidor da base de dados (deixe em branco para conexões locais)
+ Nome ou endereço IP do computador que hospeda o servidor da base de dados (deixe em branco para conexões locais)
+ Port number used by the database server (leave blank for default 2638)
- Número da porta utilizada pelo servidor da base de dados (deixar em branco para a porta padrão 2638)
+ Número da porta utilizada pelo servidor da base de dados (deixar em branco para a porta padrão 2638)
+ Name of the database server (leave blank for default server on host)
- Nome do servidor da base de dados (deixar em branco para o servidor padrão da máquina)
+ Nome do servidor da base de dados (deixar em branco para o servidor padrão da máquina)
+ Name of the database (leave blank for default database on server)
- Nome da base de dados (deixar em branco para base de dados padrão do servidor)
+ Nome da base de dados (deixar em branco para base de dados padrão do servidor)
+ Additional connection parameters
- Parâmetros adicionais da ligação
+ Parâmetros adicionais da ligação
+ Database username
- Nome de usuário da base de dados
+ Nome de usuário da base de dados
+ Database password
- Palavra-passe da base de dados
+ Palavra-passe da base de dados
+ Save the connection username in the registry
- Salvar a ligação do utilizador no registo
+ Salvar a ligação do utilizador no registo
+ Save Username
- Salvar nome do utilizador
+ Salvar nome do utilizador
+ &Test Connect
- &Testar Ligação
+ &Testar Ligação
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Salvar a palavra-passe no resgisto (AVISO: NÃO É SEGURO)
+ Salvar a palavra-passe no resgisto (AVISO: NÃO É SEGURO)
+ Save Password
- Salvar Palavra-passe
+ Salvar Palavra-passe
+ Encrypt packets using simple encryption
- Encriptar pacotes utilizando encriptação simples
+ Encriptar pacotes utilizando encriptação simples
+ Simple Encryption
- Encriptação simples
+ Encriptação simples
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Utilizar estimativas para certas propriedades da camada como extensão, cardinalidade, etc. (melhora o desempenho)
+ Utilizar estimativas para certas propriedades da camada como extensão, cardinalidade, etc. (melhora o desempenho)
+ Estimate table metadata
- Tabela estimativa de metadados
+ Tabela estimativa de metadados
+ Search for geometry columns in tables owned by other users
- Procurar colunas de geometria nas tabelas pertencentes a outros utilizadores
+ Procurar colunas de geometria nas tabelas pertencentes a outros utilizadores
+ Search other users' tables
- Pesquisar tabelas de outros utilizadores
+ Pesquisar tabelas de outros utilizadores
SaSourceSelect
+ &Add
- &Adicionar
+ &Adicionar
+ &Set Filter
- &Definir Filtro
+ &Definir Filtro
+ Wildcard
- Caracter universal
+ Caracter universal
+ RegExp
- RegExp
+ RegExp
+ All
- Tudo
+ Tudo
+ Schema
- Esquema
+ Esquema
+ Table
- Tabela
+ Tabela
+ Type
- Tipo
+ Tipo
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretação da linha
+ Interpretação da linha
+ Geometry column
- Geometria da Coluna
+ Geometria da Coluna
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Quer realmente remover a ligação %1 e todas as configurações associadas?
+ Quer realmente remover a ligação %1 e todas as configurações associadas?
+ Confirm Delete
- Confirme a eliminação
+ Confirme a eliminação
+ Select Table
- Seleccionar Tabela
+ Seleccionar Tabela
+ You must select a table in order to add a layer.
- Deve seleccionar uma tabela para poder adiccionar uma camada.
+ Deve seleccionar uma tabela para poder adiccionar uma camada.
+ Failed to load interface
- Falha ao carregar a interface
+ Falha ao carregar a interface
+ Connection failed
- A ligação falhou
+ A ligação falhou
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Ligação com a base de dados %1 falhou. Verifique as configurações e tente novamente.
+ Ligação com a base de dados %1 falhou. Verifique as configurações e tente novamente.
Código de erro SQL Anywhere: %2
Descrição: %3
+ No accessible tables found
- Não foram encontradas tabelas acessíveis
+ Não foram encontradas tabelas acessíveis
+ Database connection was successful, but no tables containing geometry columns were %1.
- Ligação com a base de dados estabelecida, mas sem tabelas contendo geometria da colunas %1.
+ Ligação com a base de dados estabelecida, mas sem tabelas contendo geometria da colunas %1.
+ found
- encontrado
+ encontrado
+ found in your schema
- encontrado no seu esquema
+ encontrado no seu esquema
SaSourceSelectBase
+ Add SQL Anywhere layer
- Adicionar Camada SQL Anywhere
+ Adicionar Camada SQL Anywhere
+ SQL Anywhere Connections
- Conexões SQL Anywhere
+ Conexões SQL Anywhere
+ Delete
- Apagar
+ Apagar
+ Edit
- Editar
+ Editar
+ New
- Novo
+ Novo
+ Connect
- Conectar
+ Conectar
+ Search options
- Opções de pesquisa
+ Opções de pesquisa
+ Search
- Pesquisar
+ Pesquisar
+ Search mode
- Modo de pesquisa
+ Modo de pesquisa
+ Search in columns
- Pesquisar nas colunas
+ Pesquisar nas colunas
SaveAsPythonScriptAction
I/O error
- Erro I/O
+ Erro I/O
Unable to save edits. Reason:
%s
- Impossível guardar edições. Razão:
+ Impossível guardar edições. Razão:
%s
@@ -54211,20 +53898,24 @@ Descrição: %3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Adicionar Camada SQL Anywhere...
+ Adicionar Camada SQL Anywhere...
+ Store vector layers within a SQL Anywhere database
- Guardar camadas vetoriais numa base de dados SQL Anywhere
+ Guardar camadas vetoriais numa base de dados SQL Anywhere
+ Invalid Layer
- Camada Inválida
+ Camada Inválida
+ %1 is an invalid layer and cannot be loaded.
- %1 é uma camada inválida e não pode ser carregada.
+ %1 é uma camada inválida e não pode ser carregada.
@@ -55562,7 +55253,7 @@ Para executar a topologia clique aqui.
context_help
- <h3>Database connection</h3>
<h3>Conexões de Base de dados</h3>
@@ -55783,7 +55474,7 @@ que estão descritas e ilustradas em<a href="http://en.wikipedia.org/wik
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55793,7 +55484,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55844,7 +55535,7 @@ After that you can save your CRS by clicking the button <label>Save</la
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference
system.
<p>
-Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
+Defining a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the <a href="ftp://ftp.remotesensing.org/proj/OF90-284.pdf">Cartographic Projection Procedures for the UNIX Environment</a> - A User's Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990. This manual describes the use of the <i>proj.4</i> and related command line utilities. The cartographic parameters used with <i>proj.4</i> are described in the user manual, and are the same as those used by QGIS.
<h3>Definição de Sistema de Referência de Coordenadas Personalizado</h3>
Se o QGIS não fornecer o sistema de referências de coordenadas que necessita, poderá definir o seu próprio sistema. <p>
@@ -55878,7 +55569,7 @@ Para definir um SRC personalizado no QGIS precisa de entender bem a blibloteca d
<table>
<tr>
<td>
- <p align='justify'>
+ <p align='justify'>
The QGIS Python Console is an interactive shell for the python command executions.
It also has a python file editor that allows you to edit and save your python scripts.
Both console and editor are based on PyQScintilla2 package.<br>
@@ -55934,7 +55625,7 @@ Para definir um SRC personalizado no QGIS precisa de entender bem a blibloteca d
</tr>
</table>
<b><i>Toolbar:</i></b>
- <table width="100%" id='toolbarConsole'>
+ <table width="100%" id='toolbarConsole'>
<tr>
<td><img src="qrc:/images/themes/default/console/iconClearConsole.png" /></td>
<td colspan="2">Clear python console</td>
@@ -56029,8 +55720,8 @@ that will be automatically deleted after running.</li>
<br>
<li><label>Using prepared APIs file:</label> If checked the *.pap file will be used for code completion. To generate a prepared APIs file you have to load least an *.api file and then compile it by clicking on <label>Compile Apis...</label> button.</li>
</ul>
-<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
- <b>Note:</b> To save the state of console's widgets you have to close the Python Console
+<p style='border: 1px solid; background:#f6f6f6;' align='justify'>
+ <b>Note:</b> To save the state of console's widgets you have to close the Python Console
from the close button. This allows you to save the geometry to be restored to the next start.
</p>
@@ -56214,7 +55905,7 @@ This dialog allows you to define the settings for a connection to a Oracle datab
<li> <label>Only look in meta data table</label> Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.
-<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
+<li> <label>Only look for user's tables</label> When searching for spatial tables restrict the search to tables that are owner by the user.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56229,7 +55920,7 @@ the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied. The table
geometry is determined from the first 100 non-null geometry rows in the table.
<li> <label>Only existing geometry types</label> Only list the existing
-geometry types and don't offer to add others.
+geometry types and don't offer to add others.
</ul>
@@ -56410,10 +56101,10 @@ The field calculator allows you to update fields with expressions.
</td>
<td>value of field <tt>column_name</tt></td>
</tr>
-<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
+<tr><td>'<tt>string</tt>'</td><td>literal string value</td></tr>
<tr><td><tt>number</tt></td><td>number</td></tr>
<tr><td>NULL</td><td>null value</td></tr>
-<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
+<tr><td>exp(<tt>a</tt>)</td><td>Euler's number e to the power of <tt>a</tt></td></tr>
<tr><td>ln(<tt>a</tt>)</td><td>natural log (i.e. base e) of <tt>a</tt></td></tr>
<tr><td>log10(<tt>a</tt>)</td><td>log base 10 of <tt>a</tt></td></tr>
<tr><td>log(<tt>a</tt>,<tt>b</tt>)</td><td>log base <tt>b</tt> of <tt>a</tt></td></tr>
@@ -56538,8 +56229,8 @@ Draws a scale bar on the map.
<p>
You can control the style and placement, as well as the labeling of the bar.
QGIS only supports displaying the scale in the same units as your map frame. So
-if the units of your layers are in meters, you can't create a scale bar in
-feet. Likewise if you are using decimal degrees, you can't create a scale bar
+if the units of your layers are in meters, you can't create a scale bar in
+feet. Likewise if you are using decimal degrees, you can't create a scale bar
to display distance in meters.</p> <p>
To add a scale bar:
<ol>
@@ -56598,7 +56289,7 @@ This dialog allows you to define the settings for a connection to a PostgreSQL d
<li> <label>Only look in the geometry_columns table</label> Indicates that only "listed" geometry columns should be used - opposed to scanning all tables for geometry columns.
-<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
+<li> <label>Only look in the 'public' schema</label> Indicates that only tables in the 'public' schema should be considers - opposed to all accessible tables.
<li> <label>Also list tables with no geometry</label> Indicates that tables without geometry should also be listed by default.
@@ -56862,8 +56553,8 @@ To avoid digitizing all vertices of the common boundary select <label>Avoi
<a name="crs">
<h4>Coordinate Reference System (CRS) Tab</h4>
</a>
-The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
-<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
+The Coordinate Reference System (CRS) tab allows you to set the projection for the current project and enable on the fly transformation. You do not need to have a saved project to setup and enable 'on the fly' CRS transformation.
+<p>To use 'on the fly' CRS transformation, click the <label>Enable 'on the fly' CRS transformation</label> check box. Then choose the projection for the project (map canvas) from the list of Geographic or Projected coordinate systems.
<p>You can find a coordinate system by entering its name, EPSG code or the QGIS ID and clicking the <label>Find</label> button.
<p>The list of recently used coordinate systems will be available on the bottom for quick access.
@@ -57304,7 +56995,7 @@ Para actualizar a extensão de um marcador, clique nele e de seguida clique no b
<p><label>Topology tolerance</label> - the distance in units of the project. If the distance of two points falls short the topological tolerance, they are considered to be the vertex. A topological tolerance value greater than zero slows down the plugin, but you can use not ideal data sources.</p>
<h5>Note</h5>
-<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
+<p>The Road graph plugin considers two roads as linked, if they have a common node. A Node is uniquely identified by it's coordinates. However, in the process of digitizing errors may occur. The errors sometimes occur when the network is transformed from one coordinate reference system to another. This might cause the Road graph plugin to consider connected roads as disconnected. In that case the topological tolerance should be set to a value greater than zero.</p>
<a name="LayerSettings">
<h4>Transport layer settings</h4>
@@ -57443,6 +57134,7 @@ Estas costumam ser avaliadas mais rapidamente que as expressões genéricas do Q
+ <h3>Create a New SQL Anywhere Connection</h3>
This dialog allows you to define the settings for a connection to a
SQL Anywhere database.
@@ -57471,11 +57163,11 @@ SQL Anywhere database.
<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
-<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
</ul>
- <h3>Criar uma Nova Ligação SQL Anywhere</h3>
+ <h3>Criar uma Nova Ligação SQL Anywhere</h3>
Este diálogo permite que possa definir as configurações para uma ligação a uma
base de dados SQL Anywhere database.
<p>
@@ -57515,7 +57207,7 @@ base de dados SQL Anywhere database.
The open vector layer dialog is used to add vector data to the QGIS map view. Vector data are spatial data described using geometries of points, lines and polygons (enclosed areas).</p>
QGIS supports vector data in a number of formats, including those supported by the OGR library data provider plugin, such as ESRI shape files, MapInfo MIF (interchange format) and MapInfo TAB (native format).</p>
QGIS supports PostGIS layers in a PostgreSQL database and SpatiaLite layers. Support for additional data types (eg. delimited text) is provided by additional data provider plugins. A list of OGR supported vector formats can be found in Appendix A.1 of the User Guide.</p>
-Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
+Detailed description how to proceed with vector data is described in chapter 5 'Working with Vector Data'.
<h3>Abrir o Diálogo da Camada Vectorial</h3>
@@ -57604,10 +57296,10 @@ It is possible to check how often QGIS will download the list and update informa
from the available repositories.
</p>
<p>
-By checking the 'Show experimental plugins' checkbox, all plugins will be shown
-in the lists, even the ones that are considered 'experimental' by the author.
+By checking the 'Show experimental plugins' checkbox, all plugins will be shown
+in the lists, even the ones that are considered 'experimental' by the author.
-<table border=1 width='95%' align='center'><tr><td>
+<table border=1 width='95%' align='center'><tr><td>
Note: Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered "incomplete" or "proof of concept" tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for testing purposes.
</td></tr></table>
@@ -57757,7 +57449,7 @@ Define placement algorithm for labels. Choose between <label>central point
In the <label>Digitizing</label> tab you can define settings for digitizing line width and color.
<h5>Snapping</h5>
Here you can define a general, project wide snapping tolerance. <p>
-You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
+You can select between <label>To vertex</label>, <label>To segment</label> or <label>To vertex and segment</label> as default snap mode. You can also define a default snapping tolerance and a search radius for vertex edits. The tolerance can be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesn't have to be changed after zoom operations.<p>
A layer based snapping tolerance can be defined by choosing <label>Settings</label> (or <label>File</label>) > <label>Project Properties...</label>. In the <label>General</label> tab, section <label>Digitize</label> you can click on <label>Snapping options...</label> to enable and adjust snapping mode and tolerance on a layer basis.
<h5>Vertex markers</h5>
You can define marker style as <label>Semi transparent circle</label>, <label>Cross</label> or <label>None</label> and size; you can also set showing markers only for selected features.
@@ -57881,6 +57573,7 @@ Nesta secção pode ver a lista dos atributos. Para apagar um deles, clique nele
+ <h3>Add SQL Anywhere Tables</h3>
This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
<p>
@@ -57919,7 +57612,7 @@ To filter a layer before adding it to the map, either double click on its name o
</a>
Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
- <h3>Adicionar Tabelas SQL Anywhere</h3>
+ <h3>Adicionar Tabelas SQL Anywhere</h3>
Este diálogo permite que possa adicionar camadas SQL Anywhere (tabelas com coluna de geometria) ao enquadramento do mapa no QGIS.
<p>
<a href="#connect">Ligações</a><br/>
@@ -58097,7 +57790,7 @@ It is safer to use an explicit coding if the QGIS project needs to be portable.
or degrees/minutes. QGIS is quite permissive in its interpretation of degrees/minutes/seconds.
A valid DMS coordinate will contain three numeric fields with an optional hemisphere prefix or suffix
(N, E, or + are positive, S, W, or - are negative). Additional non numeric characters are
- generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
+ generally discarded. For example <tt>N41d54'01.54"</tt> is a valid coordinate.
</li>
</ul>
<p>For well known text geometry the following options apply:</p>
@@ -58147,8 +57840,8 @@ are escaped.</p>
(that is, to stop it being treated as a new line, delimiter, or quote character).
</p>
<p>Escape characters that are also quote characters have much more limited effect. They only apply within quotes and only escape themselves. For example, if
-<tt>'</tt> is a quote and escape character, then the string
-<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
+<tt>'</tt> is a quote and escape character, then the string
+<tt>'Smith''s Creek'</tt> will represent the value Smith's Creek.
</p>
@@ -58877,7 +58570,7 @@ Para suporte envie um email para scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -59645,7 +59338,7 @@ A extensão não será activada.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -59661,9 +59354,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
<h3>função week()</h3>
@@ -59688,7 +59381,7 @@ de um <code>Intervalo</code>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -59713,7 +59406,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
ELSE <i>"column"</i>
END
</pre>
@@ -59749,7 +59442,7 @@ retorna um resultado.
- <h3>right() function</h3>
Returns a substring that contains the <i>n</i> rightmost characters of the string.
@@ -59763,7 +59456,7 @@ Returns a substring that contains the <i>n</i> rightmost characters
<h4>Example</h4>
<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
+<code>right('Hello World',5) → 'World'</code><br>
<h3>função right()</h3>
@@ -59784,7 +59477,7 @@ Retorna a sub cadeia de texto que contém <i>n</i> caracteres à dir
-
<h3>Color Group</h3>
This group contains functions for manipulating colors
@@ -59795,7 +59488,7 @@ Este grupo contém funções para manipular cores
- <h3>length() function</h3>
Returns the length of a string.
@@ -59808,7 +59501,7 @@ Returns the length of a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- length('HELLO') → 5</p>
+ length('HELLO') → 5</p>
<h3>função length()</h3>
Retornas o comprimento de uma cadeia de texto.
@@ -59826,7 +59519,7 @@ Retornas o comprimento de uma cadeia de texto.
- <h3>upper() function</h3>
Converts a string to upper case letters.
@@ -59839,7 +59532,7 @@ Converts a string to upper case letters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
+ upper('hello WOrld') → 'HELLO WORLD'</p>
<h3>função upper()</h3>
Converte a cadeia de texto para maiúsculas.
@@ -59857,9 +59550,9 @@ Converte a cadeia de texto para maiúsculas.
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
<h4>Syntax</h4>
<pre>bbox( a, b )</pre>
@@ -59869,8 +59562,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
<h3>função bbox</h3>
Returna 1 se as geometrias intersectam espacialmente a caixa envolvente definida e 0 se não.
@@ -59887,7 +59580,7 @@ b → geometry
<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → retorna 0</pre>
- <h3>left() function</h3>
Returns a substring that contains the <i>n</i> leftmost characters of the string.
@@ -59901,7 +59594,7 @@ Returns a substring that contains the <i>n</i> leftmost characters o
<h4>Example</h4>
<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
+<code>left('Hello World',5) → 'Hello'</code><br>
<h3>função left()</h3>
@@ -59922,7 +59615,7 @@ Retorna a sub cadeia de texto que contém <i>n</i> caracteres à esq
- <h3>$scale function</h3>
Returns the current scale of the map canvas.
<br>
@@ -59951,7 +59644,7 @@ Nota: Esta função só está disponível em alguns contextos, caso contrário s
- <h3>ceil() function</h3>
Rounds a number upwards.
@@ -59984,9 +59677,9 @@ Arredonda o número para cima.
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
<p><h4>Syntax</h4>
toreal(<i>string</i>)</p>
@@ -59997,7 +59690,7 @@ Converts a string to real number. Nothing changed if a value cannot be converted
<p><h4>Example</h4>
<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
+ toreal('123.45') → 123.45</p>
<h3>função toreal()</h3>
Converte uma cadeia de texto para um número real. O valor não muda quando não for possível converter para real (ex. '123.56asd' é inválido). Os números são arredondados após guardar as alterações se a precisão dor mais pequena que o resultado da conversão.
@@ -60015,7 +59708,7 @@ Converte uma cadeia de texto para um número real. O valor não muda quando não
- <h3>xat() function</h3>
Retrieves a x coordinate of the current feature
@@ -60042,7 +59735,7 @@ Fornece a coordenada x do elemento actual
- <h3>$numpages function</h3>
Returns the total number of pages in the composition.
@@ -60071,14 +59764,14 @@ Nenhum
- <h3>strpos() function</h3>
Return the index of a regular expression in a string.
<h4>Syntax</h4>
strpos(<i>haystack</i>, <i>needle</i>)
<br><br>
-Returns -1 if the expression isn't found.
+Returns -1 if the expression isn't found.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
@@ -60087,8 +59780,8 @@ Returns -1 if the expression isn't found.
<h4>Example</h4>
<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
<h3>função strpos()</h3>
Retorna o índice de uma expressão numa cadeia de texto.
@@ -60110,7 +59803,7 @@ Retorna -1 se a expressão não for encontrada.
- <h3>rand() function</h3>
Returns a random integer within the range specified by the minimum and
maximum argument (inclusive).
@@ -60147,7 +59840,7 @@ Esta função recebe dois argumentos.
- <h3>$atlasgeometry function</h3>
Returns the geometry of the current feature iterated in atlas.
Can be used for rule based display of geometry when using atlas.
@@ -60182,7 +59875,7 @@ Nenhum
- <h3>$atlasfeatureid function</h3>
Returns the feature id of the current row while using atlas.
This enables you to use features of atlas in rules
@@ -60214,7 +59907,7 @@ Nenhum
- <h3>bounds_width function</h3>
Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60242,7 +59935,7 @@ geom → uma geometria
- <h3>floor() function</h3>
Rounds a number downwards.
@@ -60275,7 +59968,7 @@ Arredonda o número para baixo.
- <h3>bounds_height function</h3>
Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -60303,9 +59996,9 @@ geom → uma geometria
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
<p><h4>Syntax</h4>
toint(<i>string</i>)</p>
@@ -60316,7 +60009,7 @@ Converts a string to integer number. Nothing changed if a value cannot be conver
<p><h4>Example</h4>
<!-- Show example of function.-->
- toint('123') → 123</p>
+ toint('123') → 123</p>
<h3>função toint()</h3>
Converte uma cadeia de texto para um número inteiro. Nada será alterado se o valor não possa ser convertido para inteiro (ex. '123asd' é inválido).
@@ -60334,7 +60027,7 @@ Converte uma cadeia de texto para um número inteiro. Nada será alterado se o v
- <h3>yat() function</h3>
Retrieves a y coordinate of the current feature
@@ -60361,7 +60054,7 @@ Fornece a coordenada y do elemento actual
- <h3>tostring() function</h3>
Converts a number to string.
@@ -60374,7 +60067,7 @@ Converts a number to string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- tostring(123) → '123'</p>
+ tostring(123) → '123'</p>
<h3>função tostring()</h3>
Converte um número para a cadeia de texto.
@@ -60392,7 +60085,7 @@ Converte um número para a cadeia de texto.
- <h3>$rownum function</h3>
Returns the number of the current row.
@@ -60421,7 +60114,7 @@ Nenhum
- <h3>atan2() function</h3>
Returns arcustangens of y/x using the signs of the two
arguments to determine the quadrant of the result
@@ -60456,7 +60149,7 @@ argumentos para determinar o quadrante do resultado
- <h3>sin() function</h3>
Returns sinus of an angle.
@@ -60485,7 +60178,7 @@ Retorna o seno de um ângulo.
- <h3>month() function</h3>
Extract the month part from a date, or the number of months
from a <code>Interval</code>
@@ -60501,9 +60194,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
<h3>função month()</h3>
@@ -60557,7 +60250,7 @@ Nenhum
- <h3>day() function</h3>
Extract the day from a date, or the number of days
from a <code>Interval</code>
@@ -60573,9 +60266,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
<h3>função day()</h3>
@@ -60600,12 +60293,12 @@ de um <code>Intervalo</code>
- <h3>todate() function</h3>
Convert a string into Qt data type.
<h4>Syntax</h4>
-<code>todate('string')</code><br>
+<code>todate('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date format.
@@ -60629,7 +60322,7 @@ Converte uma cadeia de texto para um tipo de data Qt.
<code>todate('2012-05-04') → 2012-05-04</code><br>
- <h3>lpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60646,7 +60339,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
<h3>função lpad()</h3>
Retorna a cadeia de texto com largura fornecida
@@ -60668,7 +60361,7 @@ usando o preenchimento de caracteres.
- <h3>acos() function</h3>
Returns arcuscosinus of a value in radians.
@@ -60697,14 +60390,14 @@ Retorna o arcocosseno de um valor em radianos.
- <h3>Fields and Values</h3>
Contains a list of fields from the layer. Sample values can also be accessed via right-click.
<br><br>
Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60719,7 +60412,7 @@ ser adicionada, ex. na construção de consultas.
</p>
- <h3>log() function</h3>
Returns the value of the logarithm of the passed value and base.
<br>
@@ -60756,7 +60449,7 @@ Esta função recebe dois argumentos.
- <h3>Geometry Group</h3>
This group contains functions that operate on geometry objects e.g length, area.
@@ -60765,14 +60458,14 @@ Este grupo contém funções que operam nos objectos de geometria como por exemp
- <h3>Field</h3>
Double click to add field name to expression string.
<br><br>
Right-Click on field name to open context menu sample value loading options.
<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
+Loading field values from WFS layers isn't supported, before the layer is
actually inserted, ie. when building queries.
</p>
@@ -60788,7 +60481,7 @@ de ser inserida,ex. quando constrói consultas.
- <h3>$page function</h3>
Returns the current page number within a composition.
@@ -60817,7 +60510,7 @@ Nenhum
- <h3>exp() function</h3>
Returns exponential of an value.
@@ -60846,7 +60539,7 @@ Retorna o exponencial de um valor
- <h3>rpad() function</h3>
Returns a string with supplied width padded
using the fill character.
@@ -60863,7 +60556,7 @@ using the fill character.
<h4>Example</h4>
<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
<h3>função rpad()</h3>
@@ -60886,7 +60579,7 @@ Retorna uma cadeia de texto com a largura do enchimento fornecida usando um cara
- <h3>round() function</h3>
Rounds a number to number of decimal places.
<br>
@@ -60931,7 +60624,7 @@ use <code>round(decimal)</code> para arrendondar ao próximo inteiro
- <h3>$now function</h3>
Returns the current date and time
@@ -60960,7 +60653,7 @@ Nenhum
- <h3>color_hsl() function</h3>
Returns a string representation of a color based on its hue, saturation, and lightness attributes
@@ -60975,7 +60668,7 @@ Returns a string representation of a color based on its hue, saturation, and lig
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
+ color_hsl(100,50,70) → '166,217,140'</p>
<h3>função color_hsl()</h3>
Retorna uma cadeia de texto da representação da cor baseada nos atributos da tonalidade, saturação, e luminosidade
@@ -60995,7 +60688,7 @@ Retorna uma cadeia de texto da representação da cor baseada nos atributos da t
- <h3>scale_exp() function</h3>
Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
of the specified output range.
@@ -61008,8 +60701,8 @@ of the specified output range.
<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
<h4>Example</h4>
<!-- Show example of function.-->
@@ -61056,7 +60749,7 @@ acelerar assim que os valores de entrada se aproximam do domínio máximo. Expon
- <h3>convexHull function</h3>
Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
@@ -61068,7 +60761,7 @@ a → geometry
a → geometry
<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
<h3>função fecho convexo</h3>
Returnoa o fecho convexo de uma geometria. Representa a geometria convexa mínima que fecha todas as geometrias dentro do conjunto.
@@ -61085,7 +60778,7 @@ a → geometria
- <h3>union function</h3>
Returns a geometry that represents the point set union of the geometries.
@@ -61097,7 +60790,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
<h3>função união</h3>
Retorna a geometria que representa o conjunto de pontos de união das geometrias.
@@ -61114,7 +60807,7 @@ b → geometria
- <h3>xmax function</h3>
Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61142,7 +60835,7 @@ geom → uma geometria
- <h3>bounds function</h3>
Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61170,7 +60863,7 @@ geom → uma geometria
- <h3>ymax function</h3>
Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61198,7 +60891,7 @@ geom → uma geometria
- <h3>contains function</h3>
Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
@@ -61210,8 +60903,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>função contains</h3>
Devolve verdadeiro se e apenas se nenhum ponto de b está no exterior de a, e pelo menos um ponto do interior de b está no interior de a.
@@ -61229,7 +60922,7 @@ geometry → geometria
- <h3>wordwrap() function</h3>
Returns a string wrapped to a maximum/minimum number of characters.
@@ -61244,8 +60937,8 @@ Returns a string wrapped to a maximum/minimum number of characters.
<p><h4>Example</h4>
<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
<h3>função wordwrap()</h3>
Retorna uma cadeia de texto moldada ao número mínimo/máximo de caracteres.
@@ -61266,7 +60959,7 @@ Retorna uma cadeia de texto moldada ao número mínimo/máximo de caracteres.
-
<h3>color_rgb() function</h3>
Returns a string representation of a color based on its red, green, and blue components
@@ -61282,7 +60975,7 @@ Returns a string representation of a color based on its red, green, and blue com
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
+ color_rgb(255,127,0) → '255,127,0'</p>
<h3>função color_rgb()</h3>
@@ -61303,7 +60996,7 @@ Retorna uma cadeia de texto da representação de cor baseada nos componentes ve
-
<h3>color_cmyk() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow and black components
@@ -61320,7 +61013,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow an
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
<h3>função color_cmyk()</h3>
@@ -61342,7 +61035,7 @@ color_cmyk(100,50,0,10) → '0,115,230'
- <h3>intersection function</h3>
Returns a geometry that represents the shared portion of geometry a and geometry b.
@@ -61354,7 +61047,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
<h3>função intersecção</h3>
Retorna a geometria que representa a porção de geometria partilhadathe da geometria a e a geometria b.
@@ -61371,7 +61064,7 @@ geometry → geometria
-
<h3>ramp_color() function</h3>
Returns a string representing a color from a color ramp.
@@ -61381,12 +61074,12 @@ Returns a string representing a color from a color ramp.
<p><h4>Arguments</h4>
<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
<p><h4>Example</h4>
<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
<p><h4>Note:</h4>
The color ramps available vary between QGIS installations. This function
@@ -61415,7 +61108,7 @@ Os gradientes de cor disponíveis variam entre as instalações do QGIS. Esta f
- <h3>IS expression</h3>
Returns 1 if a is the same as b.
@@ -61426,8 +61119,8 @@ Returns 1 if a is the same as b.
None
<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
<pre> 4 IS 4 → returns 1 </pre>
<pre> 4 IS 2+2 → returns 1 </pre>
<pre> 4 IS 2 → returns 0 </pre>
@@ -61454,7 +61147,7 @@ Nenhum
- <h3>color_hsv() function</h3>
Returns a string representation of a color based on its hue, saturation, and value attributes
@@ -61469,7 +61162,7 @@ Returns a string representation of a color based on its hue, saturation, and val
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
+ color_hsv(40,100,100) → '255,170,0'</p>
<h3>função color_hsv()</h3>
Retorna um representação da cor em cadeia de texto baseada nos seus atributos de tonalidade, saturação, e valor
@@ -61489,7 +61182,7 @@ Retorna um representação da cor em cadeia de texto baseada nos seus atributos
- <h3>ILIKE expression</h3>
Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
@@ -61500,9 +61193,9 @@ Returns 1 if the first parameter matches case-insensitive the supplied pattern.
None
<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
<h3>expressão ILIKE</h3>
Retorna 1 se o primeiro parâmetro coincide em caso insensível a maiúsculas com o padrão fornecido. LIKE pode ser usado em vez do ILIKE para fazer uma coincidência sensível a maiúsculas. Também trabalha com números.
@@ -61520,7 +61213,7 @@ Nenhum
- <h3>LIKE expression</h3>
Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
@@ -61531,9 +61224,9 @@ Returns 1 if the first parameter matches the supplied pattern. Works with number
None
<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
<h3>expressão LIKE</h3>
Retorna 1 se o primeiro parâmetro coincide com o padrão fornecido. Trabalha também com os números.
@@ -61551,7 +61244,7 @@ Nenhum
- <h3>ymin function</h3>
Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -61579,7 +61272,7 @@ geom → uma geometria
- <h3>geomFromGML function</h3>
Returns a geometry from a GML representation of geometry
@@ -61590,7 +61283,7 @@ Returns a geometry from a GML representation of geometry
text → GML representation of a geometry
<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
<h3>função geomFromGML</h3>
@@ -61608,7 +61301,7 @@ text → representação GML de uma geometria
- <h3>Date and Time Group</h3>
This group contains functions for handling date and time data.
@@ -61617,7 +61310,7 @@ Este grupo contém funções para lidar com dados de data e horas.
- <h3>combine function</h3>
Returns the combination of geometry a and geometry b.
@@ -61629,8 +61322,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
<h3>função combinar</h3>
Retorna a combinação da geometria a e a geometria b.
@@ -61648,9 +61341,9 @@ geometry → geometria
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
<h4>Syntax</h4>
<pre>intersects( a, b )</pre>
@@ -61660,8 +61353,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>função de intersecção</h3>
Retorna 1 se a geometria intersecta espacialmente (partilhe qualquer porção do espaço) e 0 se não.
@@ -61679,7 +61372,7 @@ b → geometria
- <h3>clamp() function</h3>
Restricts an input value to a specified range.
@@ -61722,7 +61415,7 @@ Restringe um valor de entrada a um intervalo específico.
- <h3>disjoint function</h3>
Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
@@ -61734,8 +61427,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
<h3>função disjoint</h3>
Returna 1 se as geometrias não se "intersectam espacialmente" - se não partilham um espaço conjunto.
@@ -61753,7 +61446,7 @@ b → geometria
- <h3>geomFromWKT function</h3>
Returns a geometry created from a Well-Known Text (WKT) representation.
@@ -61764,7 +61457,7 @@ Returns a geometry created from a Well-Known Text (WKT) representation.
text → Well-Known Text (WKT) representation of a geometry
<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
<h3>função geomFromWKT</h3>
@@ -61780,7 +61473,7 @@ text → Representação da geometria do Well-Known Text (WKT).
<pre> geomFromWKT( 'POINT(4 5)' ) → retorna a geometria</pre>
- <h3>buffer function</h3>
Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
@@ -61811,43 +61504,7 @@ b → distância para o buffer
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
Returns the feature id of the current row.
@@ -61876,10 +61533,10 @@ Nenhum
- <h3>$uuid function</h3>
Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
method. Each UUID is 38 characters long.
<h4>Syntax</h4>
@@ -61906,25 +61563,7 @@ Nenhum
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
Returns 1 if the supplied geometries have some, but not all, interior points in common.
@@ -61936,8 +61575,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>função crosses</h3>
Returna 1 se as geometrias fornecidas tenham alguns, mas não todos, pontos interiores em comum.
@@ -61955,7 +61594,7 @@ geometry → geometria
- <h3>geomToWKT function</h3>
Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
@@ -61981,7 +61620,7 @@ a → geometria
<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
- <h3>touches function</h3>
Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
@@ -61993,8 +61632,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
<h3>função touches</h3>
Retorna 1 se as geometrias t~em pelo menos um ponto em comum, mas o seu interior não se intersecta.
@@ -62012,7 +61651,7 @@ b → geometria
- <h3>overlaps function</h3>
Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
@@ -62024,8 +61663,8 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
<h3>função overlaps</h3>
Returna 1 se as geometrias partilham o espaço, são da mesma dimensão, mas não estão completamente contidos um no outro.
@@ -62043,7 +61682,7 @@ b → geometria
- <h3>AND logical operator</h3>
Returns 1 when condition a and b are true.
@@ -62073,7 +61712,7 @@ Nenhum
- <h3>$geometry function</h3>
Returns the geometry of the current feature. Can be used for processing with other functions.
@@ -62102,7 +61741,7 @@ Nenhum
- <h3>OR logical operator</h3>
Returns 1 when condition a or b is true.
@@ -62133,7 +61772,7 @@ Nenhum
- <h3>centroid function</h3>
Returns the geometric center of a geometry.
@@ -62162,7 +61801,7 @@ a → geometria
- <h3>within function</h3>
Returns 1 if the geometry a is completely inside geometry b
@@ -62174,8 +61813,8 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
<h3>função within</h3>
Retorna 1 se a geometria está completamente dentro da geometria b
@@ -62193,7 +61832,7 @@ geometry → geometria
- <h3>$map function</h3>
Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
drawn within the main QGIS window.
@@ -62230,7 +61869,7 @@ $map → "canvas" (dento do enquadramento principal do QGIS)<
- <h3>distance function</h3>
Returns the minimum distance (based on spatial ref) between two geometries in projected units.
@@ -62242,7 +61881,7 @@ a → geometry
b → geometry
<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
<h3>função distance</h3>
Returna a distância mínima (baseado na ref espacial) entre as unidades projectadas de duas geometrias.
@@ -62259,7 +61898,7 @@ b → geometria
- <h3>difference function</h3>
Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
@@ -62271,7 +61910,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
<h3>função difference</h3>
Retorna a geometria que representa parte da geometria a que não intersecta com a geometria b.
@@ -62288,7 +61927,7 @@ geometry → geometria
- <h3>NOT</h3>
Returns 1 if a is not the same as b.
@@ -62299,8 +61938,8 @@ Returns 1 if a is not the same as b.
None
<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
<pre> 4 IS NOT 2+2 → returns 0 </pre>
@@ -62321,7 +61960,7 @@ Nenhum
- <h3>symDifference function</h3>
Returns a geometry that represents the portions of a and b that do not intersect.
@@ -62333,7 +61972,7 @@ geometry → geometry
geometry → geometry
<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
<h3>função symDifference</h3>
Returna a geometria que representa porções de a e b que não se intersectam.
@@ -62350,7 +61989,7 @@ geometry → geometria
- <h3>$perimeter function</h3>
Returns the perimeter length of the current feature.
@@ -62379,12 +62018,12 @@ Nenhum
- <h3>tointerval() function</h3>
Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
+<code>tointerval('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Format {n} days {n} hours {n} months
@@ -62408,7 +62047,7 @@ Converte uma cadeia de texto para um tipo de intervalo. Pode ser para tirar dia
<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
- <h3>hour() function</h3>
Extract the hour from a datetime or time, or the number of hours
from a <code>Interval</code>
@@ -62424,10 +62063,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
<h3>função hour()</h3>
@@ -62453,7 +62092,7 @@ de um <code>Intervalo</code>
- <h3>color_hsla() function</h3>
Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
@@ -62469,7 +62108,7 @@ Returns a string representation of a color based on its hue, saturation, lightne
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
<h3>função color_hsla()</h3>
Retorna uma cadeia de texto da representação dos atributos da co baseado na tonalidade, saturação, luminosidade e alfa (transparência)
@@ -62490,7 +62129,7 @@ Retorna uma cadeia de texto da representação dos atributos da co baseado na to
- <h3>$pi constant</h3>
Returns pi as value for calculations
@@ -62517,7 +62156,7 @@ Nenhum
- <h3>Record Group</h3>
This group contains functions that operate on record identifiers.
@@ -62526,12 +62165,12 @@ Este grupos contém funções que operam em identificadores de registo.
- <h3>totime() function</h3>
Convert a string into Qt time type.
<h4>Syntax</h4>
-<code>totime('string')</code><br>
+<code>totime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt time format.
@@ -62555,7 +62194,7 @@ Converte uma cadeia de texto para um tipo de hora Qt.
<code>totime('12:30:01') → 12:30:01</code><br>
- <h3>replace() function</h3>
Returns a string with the the supplied string replaced.
@@ -62570,7 +62209,7 @@ Returns a string with the the supplied string replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
<h3>função replace()</h3>
Retorna a substituição de uma cadeia de texto com a cadeia de texto fornecida.
@@ -62589,7 +62228,7 @@ Retorna a substituição de uma cadeia de texto com a cadeia de texto fornecida.
replace('O QGIS DEVE SER FIXE','DEVE SER','É') → 'O QGIS É FIXE'</p>
- <h3>Conditionals Group</h3>
This group contains functions to handle conditional checks in expressions.
@@ -62598,7 +62237,7 @@ Este grupo contém funções que controlam a verificação de condições em exp
- <h3>abs() function</h3>
Returns the absolute value of a number.<br>
@@ -62626,7 +62265,7 @@ abs(<i>value</i>)<br>
<code>abs(-2) → 2</code><br>
- <h3>max() function</h3>
Returns the largest value in a set of values.
@@ -62657,7 +62296,7 @@ Retorna o maior valor de um conjunto de dados.
- <h3>sqrt() function</h3>
Returns square root of a value
@@ -62686,7 +62325,7 @@ Retorna a raíz quadrada de um valor
- <h3>Conditions Group</h3>
This group contains functions that operate on condition.
@@ -62695,7 +62334,7 @@ Este grupo contém funções que operar sobre uma condição.
-
<h3>color_cmyka() function</h3>
Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
@@ -62713,7 +62352,7 @@ Returns a string representation of a color based on its cyan, magenta, yellow, b
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
<h3>função color_cmyka()</h3>
@@ -62736,7 +62375,7 @@ Retorna a representação em cadeia de texto das componentes da cor baseado no c
- <h3>format_number() function</h3>
Returns a number formatted with the locale separator for thousands.
Also truncates the number to the number of supplied places.
@@ -62773,7 +62412,7 @@ Também trunca o número nos sítios fornecidos.
- <h3>year() function</h3>
Extract the year part from a date, or the number of years
from a <code>Interval</code>
@@ -62789,9 +62428,9 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
<h3>função year()</h3>
@@ -62816,7 +62455,7 @@ de um <code>Intervalo</code>
- <h3>CASE expression</h3>
A conditional expression that can be used to evaluate multiple expressions and
return a result.
@@ -62841,7 +62480,7 @@ return a result.
<!-- Show example of function.-->
<pre>
CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
END
</pre>
@@ -62876,7 +62515,7 @@ retorna um resultado.
- <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -62913,7 +62552,7 @@ Esta função recebe dois argumentos.
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -62941,7 +62580,7 @@ geom → uma geometria
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -62983,7 +62622,7 @@ entre 0 e 360)
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -62996,7 +62635,7 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
<h3>função trim()</h3>
Remove todos os espaços em branco (espaços, avanços, etc) de uma cadeia de texto.
@@ -63014,7 +62653,7 @@ Remove todos os espaços em branco (espaços, avanços, etc) de uma cadeia de te
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -63030,10 +62669,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
<h3>função minute()</h3>
@@ -63059,7 +62698,7 @@ de um <code>Intervalo</code>
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -63088,9 +62727,9 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
<h3>função age()</h3>
@@ -63128,7 +62767,7 @@ usado <code>day</code> para extrair o número de dias<br>
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -63163,7 +62802,7 @@ Esta funcão recebe um argumento.
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
@@ -63172,7 +62811,7 @@ Este grupo contém funções que convertem um tipo de dados para outro como por
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -63201,7 +62840,7 @@ Retorna cosseno de um ãngulo.
- <h3>Operators Group</h3>
This group contains operators e.g + - *
@@ -63209,7 +62848,7 @@ This group contains operators e.g + - *
Este grupo contém operadores como por ex. + - *
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -63225,10 +62864,10 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
<h3>função second()</h3>
@@ -63252,7 +62891,7 @@ de um <code>Intervalo</code>
<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -63281,7 +62920,7 @@ Returnas um arctangente de um valor em radianos.
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -63308,7 +62947,7 @@ Nenhum
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -63322,7 +62961,7 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
<h3>função title()</h3>
Converte todas as palavras de uma cadeia de texto a iniciar com maiúsculas(todas as palavras ficam minúsculas excepto a letra do ínicio da palavra).
@@ -63340,7 +62979,7 @@ Converte todas as palavras de uma cadeia de texto a iniciar com maiúsculas(toda
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -63354,7 +62993,7 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
<h3>função regexp_match()</h3>
Returna como verdadeiro se houver qualquer parte da cadeia de texto que coincida com a expressão regular fornecida.
@@ -63373,7 +63012,7 @@ Returna como verdadeiro se houver qualquer parte da cadeia de texto que coincida
- <h3>substr() function</h3>
Return a part of a string
@@ -63388,7 +63027,7 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
<h3>função substr()</h3>
Retorna uma parte da cadeia de texto
@@ -63408,12 +63047,12 @@ Retorna uma parte da cadeia de texto
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -63439,7 +63078,7 @@ Formata uma cadeia de texto usando argumentos fornecidos.
<code>format('Isto %1 é %2','um', 'teste') → Isto é um teste</code><br>
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -63454,7 +63093,7 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
<h3>função regexp_replace()</h3>
Retorna uma cadeia de texto com uma expressão fornecida substituída.
@@ -63474,7 +63113,7 @@ Retorna uma cadeia de texto com uma expressão fornecida substituída.
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -63488,7 +63127,7 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
<h3>função regexp_substr()</h3>
Retorna uma porção da cadeia de texto que coincide com a expressão fornecida.
@@ -63507,7 +63146,7 @@ Retorna uma porção da cadeia de texto que coincide com a expressão fornecida.
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -63536,7 +63175,7 @@ Nenhum
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -63553,7 +63192,7 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
<h3>função color_rgba()</h3>
Retorna uma cadeia de texto da representação dos componentes da cor baseado no vermelho, verde, azul e alfa (transparência)
@@ -63574,7 +63213,7 @@ Retorna uma cadeia de texto da representação dos componentes da cor baseado no
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -63603,7 +63242,7 @@ Nenhum
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
@@ -63612,7 +63251,7 @@ Este grupo contém funções matemáticas como por ex raíz quadrada, sen e cos
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -63643,7 +63282,7 @@ Retorna o valor mais pequeno de um conjunto de dados.
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -63654,7 +63293,7 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
<h3>função lower()</h3>
Converte uma cadeia de texto para minúsculas.
@@ -63670,7 +63309,7 @@ Converte uma cadeia de texto para minúsculas.
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -63699,7 +63338,7 @@ Nenhum
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
@@ -63708,7 +63347,7 @@ O grupo contém funções que operam em cadeias de texto ex., substituir, conver
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -63721,7 +63360,7 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
<h3>função concat()</h3>
Concatenação de várias cadeias de texto numa só.
@@ -63739,7 +63378,7 @@ Concatenação de várias cadeias de texto numa só.
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -63756,8 +63395,8 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
<h3>função coalesce()</h3>
@@ -63782,7 +63421,7 @@ senão o valor do "fallbackField" ou a cadeia de texto 'ERROR&apo
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -63811,12 +63450,12 @@ Retorna o arcosseno de um valor em radianos.
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -63840,12 +63479,12 @@ Converte uma cadeia de texto para um tipo data hora Qt.
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -63876,14 +63515,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -63902,14 +63541,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -64014,7 +63653,7 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
<h3>função format_date()</h3>
Formata um tipo de data ou cadeia de texto num formato de cadeia de texto personalizado. Usa o formato das cadeias de texto de data Qt. Veja <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
@@ -64193,7 +63832,7 @@ Formata um tipo de data ou cadeia de texto num formato de cadeia de texto person
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -64222,7 +63861,7 @@ Retorna a tangente de um ângulo.
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -64251,7 +63890,7 @@ Nenhum
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -64286,7 +63925,7 @@ Esta função recebe um argumento.
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -64302,7 +63941,7 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
<h3>função color_hsla()</h3>
Retorna uma cadeia de texto da representação dos atributos da cor baseado na tonalidade, saturação, valor e alfa (transparência)
@@ -66877,4 +66516,4 @@ Retorna uma cadeia de texto da representação dos atributos da cor baseado na t
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_ro.ts b/i18n/qgis_ro.ts
index d96add705f1..63c1ddf4f14 100644
--- a/i18n/qgis_ro.ts
+++ b/i18n/qgis_ro.ts
@@ -1,12 +1,10 @@
-
-
-
+
APIsDialogPythonConsole
Generating prepared API file (please wait)...
-
@@ -25,15 +23,15 @@
Setting
- Setare
Value
- Valoare
+ Valoare
Providers
- Furnizori
+ Furnizori
Wrong value
@@ -50,7 +48,7 @@
ConnectionItem
Unable to connect
- Nu se poate realiza conectarea
@@ -113,70 +111,70 @@
DBManager
Sorry
- Ne pare rău
+
No database selected or you are not connected to it.
-
Select the table you want export to file.
-
DB Manager
- DB Manager
+ DB Manager
Info
- Informaţii
+
Table
- Tabel
Preview
- Previzualizare
+ Previzualizare
&Database
- &Bază de date
&Schema
- &Schemă
&Table
- &Tabel
&Refresh
- Actualiza&re
&SQL window
- Fereastră &SQL
&Exit
- I&eșire
&Import layer/file
-
&Export to file
-
DBManagerPlugin
Sorry
- Ne pare rău
+
Unable to find a valid unique field
@@ -196,28 +194,28 @@
Host:
-
User:
- Utilizator:
Library:
- Bibliotecă:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
-
create new schemas
-
create temporary tables
-
Not connected
@@ -393,7 +391,7 @@ This table is essential for many GIS applications for enumeration of tables.
<warning> This user doesn't have usage privileges for this schema!
-
Rows (counted):
@@ -401,29 +399,29 @@ This table is essential for many GIS applications for enumeration of tables.
<warning> This user has read-only privileges.
-
<warning> There's a significant difference between estimated and real row count. Consider running <a href="action:vacuumanalyze/run">VACUUM ANALYZE</a>.
-
<warning> No primary key defined for this table!
-
Scripts:
-
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
-
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
-
Length
@@ -443,7 +441,7 @@ This table is essential for many GIS applications for enumeration of tables.
<a href="action:triggers/enable">Enable all triggers</a> / <a href="action:triggers/disable">Disable all triggers</a>
-
Definition
@@ -455,28 +453,29 @@ This table is essential for many GIS applications for enumeration of tables.
&Versioning
-
&Table
- &Tabel
"{0}" not found
-
Filename:
- Nume de fișier:
SQLite version:
- Versiune SQLite:
Error:
%s
- Eroare:
+%s
@@ -490,181 +489,181 @@ Interogare:
&Re-connect
- &Re-conectare
&Database
- Baza de &date
&Create schema
-
&Schema
- &Schemă
&Delete (empty) schema
-
Delete selected item
-
&Create table
-
&Edit table
- &Editare tabelă
&Delete table/view
-
&Empty table
-
&Move to schema
-
Cannot delete the selected item.
-
No database selected or you are not connected to it.
-
New schema
- Schemă nouă
Enter new schema name
-
Select an empty SCHEMA for deletion.
-
hey!
-
Really delete schema %s?
-
Select a TABLE for editation.
-
Select a TABLE/VIEW for deletion.
-
Really delete table/view %s?
-
Select a TABLE to empty it.
-
Really delete all items from table %s?
-
Select a TABLE/VIEW.
-
Do you want to %s all triggers?
-
Table triggers
-
Do you want to %s trigger %s?
-
Table trigger
-
Do you want to %s spatial index for field %s?
-
Spatial Index
- Index Spatial
+ Index Spațial
Check
-
Primary key
- Cheie primară
+ Cheie primară
Foreign key
- Cheie externă
Unique
- Unic
+ Valoare unică
Exclusion
-
Unknown
- Necunoscut
+ Necunoscut
DBModel
Databases
- Baze de date
+ Baze de date
Invalid layer
-
Unable to load the layer %s
-
DBTree
Rename
- Redenumire
Delete
- Ştergere
Add to canvas
-
Re-connect
- Re-conectare
@@ -1027,12 +1026,12 @@ Interogare:
Store
- Depozit
Delete
- Ştergere
Vector Split
-
There were %d vertices in original dataset which
were reduced to %d vertices after simplification
-
Processing of the following layers/files ended with error:<br><br>
-
Join attributes by location
@@ -2093,9 +2092,10 @@ Acest lucru poate conduce la rezultate neașteptate.
lungime câmp
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
- Nu se poate şterge fişierul de tip shape
+%s
Split vector layer
@@ -2131,19 +2131,19 @@ Acest lucru poate conduce la rezultate neașteptate.
Can't delete file %s
- Nu se poate șterge fișierul %s
Error loading output shapefile:
%s
-
Created output shapefile:
%s
Would you like to add the new layer to the TOC?
-
Please specify input vector layer
@@ -2156,7 +2156,7 @@ Would you like to add the new layer to the TOC?
Defined Projection For:
%s.shp
-
Random Points
@@ -2188,26 +2188,26 @@ Would you like to add the new layer to the TOC?
Selected features: %s
- Entități selectate: %s
Commit error:
%s
-
Could not replace geometry of feature with id %s
-
Could not eliminate features with these ids:
%s
-
Created output shapefile:
%s
-
Line intersections
@@ -2224,7 +2224,7 @@ Would you like to add the new layer to the TOC?
Created output shapefiles in folder:
%s
-
Please specify input unique ID field
@@ -2236,7 +2236,7 @@ Would you like to add the new layer to the TOC?
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
- La ora actuală, QGIS nu permite acces simultan din diferite direcţii la aceeaşi sursă de date. Asiguraţi-vă că tabelele de atribute ale stratului dumneavoastră sunt închise. Doriţi să continuaţi?
+
Distance matrix
@@ -2370,7 +2370,7 @@ Sigur doriți să continuați?
Please specify an input layer
- Vă rog să specificaţi un strat de intrare
+
Simplify results
@@ -2393,47 +2393,24 @@ Sigur doriți să continuați?
elimină din selecția curentă
- Select by location
Selectează după locație
- Select features in:
Selectați entitățile din:
- that intersect features in:
care intersectează entitățile din:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- Modifică selecția curentă după:
+ Modifică selecția curentă după:
Use selected features only
- Folosește doar entitățile selectate
+ Folosește doar entitățile selectate
Please specify select layer
@@ -2464,11 +2441,11 @@ Sigur doriți să continuați?
DlgAddGeometryColumn
Sorry
- Ne pare rău
+
field name must not be empty
-
@@ -2476,32 +2453,32 @@ Sigur doriți să continuați?
Autofill settings
-
Autofill mode
-
Do not autofill
-
Fill with numbers
-
Fill with parameter values
-
Parameter to use
-
@@ -2509,7 +2486,7 @@ Sigur doriți să continuați?
Processing options
- Opțiuni de procesare
DlgCreateIndex
Error
- Eroare
+ Eroare
Please enter some name for the index
-
DlgCreateTable
&Create
-
Sorry
- Ne pare rău
+
no field selected
-
field is at top already
-
No field selected
-
field is at bottom already
-
select schema!
-
enter table name!
-
add some fields!
-
set geometry column name
-
Good
-
everything went fine
-
DlgExportVector
Choose where to save the file
-
Shapefiles
@@ -2595,15 +2572,15 @@ Sigur doriți să continuați?
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
@@ -2624,11 +2601,11 @@ Sigur doriți să continuați?
field name must not be empty
-
field type must not be empty
-
@@ -2636,12 +2613,12 @@ Sigur doriți să continuați?
Get scripts and models
-
about:blank
- about:blank
+
@@ -2649,7 +2626,7 @@ Sigur doriți să continuați?
Help editor
-
DlgImportVector
Choose the file to import
-
Import to database
-
Input layer missing or not valid
-
Output table name is required
-
Invalid source srid: must be an integer
-
Invalid target srid: must be an integer
-
Error %d
@@ -2709,7 +2686,7 @@ Sigur doriți să continuați?
Import was successful.
- Importare reuşită.
@@ -2717,12 +2694,12 @@ Sigur doriți să continuați?
Processing modeler
-
Open model
- Deschidere model
Edit model help
-
Run model
- Rulare model
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -2847,7 +2824,7 @@ Sigur doriți să continuați?
Script editor
-
Edit script help
-
Run algorithm
- Rulare algoritm
DlgSqlWindow
%d rows, %.1f seconds
- %d rânduri, %.1f secunde
Sorry
@@ -2932,7 +2909,7 @@ geometry column - column with unique integer values
nothing selected
- nu s-a selectat nimic
Are you sure
@@ -2940,31 +2917,31 @@ geometry column - column with unique integer values
really delete column '%s'?
- sigur doriţi să ştergeţi coloana '%s'?
really delete constraint '%s'?
- sigur doriţi să eliminaţi constrângerea '%s'?
The selected table has no geometry
- Tabelul selectat nu conține nici o geometrie
Create?
-
Create spatial index for field %s?
-
Nothing selected
- Nu s-a selectat nimic
really delete index '%s'?
-
@@ -3040,57 +3017,57 @@ geometry column - column with unique integer values
Field calculator
- Calculator pentru câmpuri
+ Calculator pentru câmpuri
Create a new field
- Crează un nou câmp
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Precision
- Precizie
+ Precizie
Input layer
- Strat intrare
+
Update existing field
- Actualizează câmpul existent
+
Output file
- Fişier de ieşire
...
- ...
+ ...
@@ -3101,34 +3078,34 @@ geometry column - column with unique integer values
Save file
- Salvare fişier
+ Salvare fişier
Unable to execute algorithm
-
Wrong or missing parameter values
-
FileDirectorySelector
...
- ...
+ ...
Select directory
- Selectare director
Select file
- Selectare fișier
All files (*.*)
- Toate fişierele (*.*)
@@ -3165,11 +3142,11 @@ geometry column - column with unique integer values
Unable to load {0} plugin.
The required "{1}" module is missing.
Install it and try again.
-
QGIS version detected:
-
This version of Gdal Tools requires at least QGIS version 1.0.0
@@ -3392,7 +3369,7 @@ Plugin-ul nu va fi activat.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -3427,12 +3404,12 @@ p, li { white-space: pre-wrap; }
No input files to process.
-
The following files were not created:
{0}
-
@@ -3467,7 +3444,7 @@ Do you want terminate it anyway?
%s not created.
-
@@ -3561,11 +3538,11 @@ Do you want terminate it anyway?
Output size or resolution required
-
The output file doesn't exist. You must set up the output size or resolution to create it.
-
Select the input file for Translate
@@ -3693,7 +3670,7 @@ Dezactivaţi opţiunea "Utilizaţi extensiunea intersectată" pentru a
{0} not created.
-
Select the files to analyse
@@ -3995,7 +3972,7 @@ la apăsarea butonului de ajutor al dialogului instrumentului.
Clipping mode
-
Color relief
-
Slope expressed as percent (instead of as degrees)
-
Inverse distance to a power
-
Moving average
-
Use intersected extent
-
&Fixed buf val
-
Keep existing raster size and resolution
-
Raster size in pixels
-
Raster resolution in map units per pixel
-
Horizontal
- Orizontal
Vertical
- Vertical
&Pixel connections
-
Raster tile index
-
Tile index field
-
Assign a specified nodata value to output bands.
-
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
-
&Memory used for caching
-
Use m&ultithreaded warping implementation
-
&Output directory for contour lines (shapefile)
-
@@ -4978,17 +4955,17 @@ Please choose another field...
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Layer '{0}' updated
-
Error writing output shapefile.
@@ -5019,7 +4996,7 @@ Please choose another field...
Please specify dissolve field
-
Please specify output shapefile
@@ -5027,7 +5004,7 @@ Please choose another field...
No features selected, please uncheck 'Use selected' or make a selection
-
Buffer(s)
@@ -5035,11 +5012,11 @@ Please choose another field...
Create single minimum convex hull
-
Create convex hulls based on input field
-
Convex hull(s)
@@ -5096,18 +5073,18 @@ Please choose another field...
No output created. File creation error:
%s
-
Created output shapefile:
%s
%s%s
-
Error loading output shapefile:
%s
-
@@ -5117,7 +5094,7 @@ Avertismente:
Symmetrical difference
-
@@ -5143,12 +5120,12 @@ Eroare de introducere CRS: Unuia sau mai multor straturi de intrare le lipsesc i
Feature geometry error: One or more output features ignored due to invalid geometry.
-
GEOS geoprocessing error: One or more input features have invalid geometry.
-
@@ -5235,12 +5212,12 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Creating heatmap
-
Abort
- Renunţare
+
Input point layer
- Strat de intrare de tip punct
+
Output raster
-
Output format
-
Rows
- Rânduri
+ Rânduri
Cell size X
-
Columns
- Coloane
+ Coloane
Cell size Y
-
Use radius from field
-
Use weight from field
-
Decay ratio
-
Quartic (biweight)
-
Triangular
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
Confirmation
-
Are you sure you want to clear log?
@@ -5456,24 +5433,24 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Dialog
- Dialog
+ Dialog
Reload
-
Save
- Salvare
+ Salvare
InfoViewer
DB Manager
- DB Manager
+ DB Manager
@@ -5497,14 +5474,14 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
&Editează
Print Composers
-
- Measure
Măsoară
- &Decorations
&Decorații
- &Layer
&Strat
- New
Nou
- &Plugins
&Plugin-uri
- &Help
&Ajutor
- &Settings
&Setări
- &Raster
&Raster
- Vect&or
Vect&or
- &OpenStreetMap
&OpenStreetMap
- File
Fişier
- Manage Layers
Gestionare straturi
- Digitizing
Digitizare
- Advanced Digitizing
Digitizare avansată
- Map Navigation
Navigaţie hartă
- Attributes
Atribute
- Plugins
Plugin-uri
- Help
Ajutor
- Raster
Raster
- Label
Etichetă
- Vector
Vector
- Database
Bază de date
- Web
Web
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+S
- Save as Image...
Salvare ca imagine...
- &New Print Composer
-
- Ctrl+P
Ctrl+P
- Composer Manager...
Managerul compozițiilor...
P&roject
- P&roiect
&Open Recent
-
New From Template
-
- Preview Mode
-
- Paste Features as
-
- &New
- &Nou
+ &Nou
- &Open...
-
- &Save
- &Salvare
- Save &As...
-
- Exit QGIS
- Închidere QGIS
+ Închidere QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
Înapoi
- Ctrl+Z
Ctrl+Z
- &Redo
Refă
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
Divizare entități
- Ctrl+X
Ctrl+X
- Copy Features
Copiere entități
- Ctrl+C
Ctrl+C
- Paste Features
Lipire entități
- Ctrl+V
Ctrl+V
- Add Feature
Adăugare entitate
- Ctrl+.
Ctrl+.
- Move Feature(s)
Mutare entitate(ăți)
- Reshape Features
-
- Split Features
Divizare entități
- Split Parts
- Divizare părți
- Delete Selected
Ștergere selecție
- Add Ring
Adăugare inel
- Add Part
Adăugare parte
- Simplify Feature
Simplificare entitate
- Delete Ring
Ştergere inel
- Delete Part
Ştergere parte
- Merge Selected Features
-
- Merge Attributes of Selected Features
-
- Node Tool
Instrumentul Nod
- Rotate Point Symbols
-
- Snapping Options...
-
- Pan Map
Translație hartă
- Zoom In
Apropiere
- Ctrl++
Ctrl++
- Zoom Out
Depărtare
- Ctrl+-
Ctrl+-
+ Select Single Feature
- Selectați o singură entitate
+ Selectați o singură entitate
- Select Features by Rectangle
+
+
+ Select Features by Polygon
-
- Select Features by Freehand
Selectați entitățile în mod liber:
- Select Features by Radius
-
- Deselect Features from All Layers
Deselectați entitățile din toate straturile
- Identify Features
Identificați entitățile
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
Măsurați linia
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
Măsurați aria
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
Măsurați unghiul
- Zoom Full
Vedere de ansamblu
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
- Focusare pe strat
- Zoom to Selection
- Focusare pe selecție
- Ctrl+J
Ctrl+J
- Zoom Last
- Înapoi la ultimul nivel de zoom
- Zoom Next
- Următorul nivel de mărire
- Zoom Actual Size
-
- Zoom to Native Pixel Resolution
-
- Map Tips
Indicii despre hartă
- Show information about a feature when the mouse is hovered over it
-
- New Bookmark...
Marcaj nou...
- Ctrl+B
Ctrl+B
- Show Bookmarks
Arată marcaje
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
Actualizează
- Text Annotation
Adnotare de tip text
- Form Annotation
Adnotare de tip formular
- Move Annotation
Mută adnotarea
- Labeling
Etichetare
- Layer Labeling Options
-
- New Shapefile Layer...
-
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
-
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
Calculator raster ...
- Add Vector Layer...
Adaugă stratul vectorial...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
Adaugă strat raster...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
Adaugă straturi PostGIS...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
Adaugă strat SpatiaLite...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
Adaugă strat MSSQL Spatial...
- Add Oracle Spatial Layer...
Adaugă strat Oracle Spatial...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
-
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
Deschide tabela de atribute
- Toggle Editing
Comută editarea
- Toggles the editing state of the current layer
-
- Save for Selected Layer(s)
-
- Save edits to current layer, but continue editing
-
- Save As...
Salvare ca...
- Add from Layer Definition File...
-
- Save As Layer Definition File...
-
- Normal
- Normal
+
- Normal preview mode
-
- Simulate Photocopy (Grayscale)
Simulează o fotocopie (tonuri de gri)
- Simulate photocopy (grayscale)
-
- Simulate Fax (Mono)
Simulează un fax (monocrom)
- Simulate fax (mono)
-
- Simulate Color Blindness (Protanope)
-
- Simulate color blindness (protanope)
-
- Simulate Color Blindness (Deuteranope)
-
- Simulate color blindness (deuteranope)
-
- Set Scale Visibility of Layer(s)
-
- Remove Layer(s)
Eliminare Strat(uri)
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
Setează CRS-ul statului(-urilor)
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
-
- Properties...
Proprietăţi...
- Query...
Interogare...
- Add to Overview
-
- Add All to Overview
-
- Remove All from Overview
-
- Show All Layers
-
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
Ascunde toate straturile
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
-
- Open Field Calculator
-
- Add Delimited Text Layer...
-
- Add Delimited Text Layer
-
- New Vector Layer
-
- Paste features in clipboard into a new OGR vector layer.
-
- New Memory Vector Layer
-
- Paste features in clipboard into a new memory vector layer.
-
- Toggle Full Screen Mode
-
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
Proprietățile proiectului...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
Opţiuni...
- Custom CRS...
CRS personalizat...
- Configure shortcuts...
Configurare comenzi rapide...
- Local Histogram Stretch
-
- Stretch histogram of active raster to view extents
-
- Help Contents
-
- F1
F1
- API documentation
Documentația API
- QGIS Home Page
Pagina de casă QGIS
- Ctrl+H
Ctrl+H
- Check QGIS Version
Verifică versiunea QGIS
- Check if your QGIS version is up to date (requires internet access)
-
- About
Despre
- QGIS Sponsors
Sponsori QGIS
- Move Label
Mută eticheta
- Rotate Label
Rotește eticheta
- Rotate Label
Ctl (Cmd) increments by 15 deg.
-
- Change Label
Schimbare etichetă
- Style Manager...
Managerul de stiluri...
- Python Console
Consola Python
- Full histogram stretch
-
- Stretch Histogram to Full Dataset
-
- Customization...
Personalizare...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
-
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
Încapsulează straturi sau grupuri...
- Embed layers and groups from other project files
Încapsulează straturi sau grupuri din fișierele altui proiect
- &Copyright Label
&Eticheta Drepturilor de Autor
- Creates a copyright label that is displayed on the map canvas.
-
- &North Arrow
Săgeata &Nordului
- "Creates a north arrow that is displayed on the map canvas"
-
- &Scale Bar
-
- Creates a scale bar that is displayed on the map canvas
-
- Add WFS Layer...
Adaugă stratul WFS...
- Add WFS Layer
Adăugare strat WFS
- Feature Action
-
- Run Feature Action
-
- Pan Map to Selection
-
- Touch zoom and pan
-
- Offset Curve
Curba de compensare
- Copy style
Copiere stil
- Paste style
Lipire stil
- Add WCS Layer...
Adaugă stratul WCS...
- &Grid
&Grid
- Grid
Grid
- Pin/Unpin Labels
-
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
Acts on all editable layers
-
- Highlight Pinned Labels
-
- New Blank Project
-
- Local Cumulative Cut Stretch
-
- Local cumulative cut stretch using current extent, default limits and estimated values.
-
- Full Dataset Cumulative Cut Stretch
-
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
-
- Show/Hide Labels
Arată/Ascunde Etichete
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
Acts on currently active editable layer
-
- Html Annotation
Adnotare HTML
- Duplicate Layer(s)
- Duplicare Strat(uri)
- SVG annotation
-
- Save for All Layers
-
- Rollback for All Layers
-
- Cancel for All Layers
-
- Rollback for Selected Layer(s)
-
- Current Edits
-
- Cancel for Selected Layer(s)
-
- Save Layer Edits
-
-
- Rotate Feature(s)
-
-
- &Download data
-
+ Rotate Feature(s)
+
+
+ &Download data
+
+
+ &Import topology from XML
&Importare topologie din XML
- &Export topology to SpatiaLite
-
- Increase brightness
Creștere luminozitate
- Decrease brightness
Scădere luminozitate
- Increase contrast
Creștere contrast
- Decrease contrast
Scădere contrast
- Select By Expression
-
- Select features using an expression
-
- Need commercial support?
-
- DXF Export...
-
- Fill Ring
-
@@ -6807,12 +6780,12 @@ Acts on currently active editable layer
Manage connections
- Gestionare conexiuni
+
Save to file
- Salvează într-un fişier
+
Load from file
- Încărcare din fişier
+
Load
-
Save
- Salvare
+
eXtensible Markup Language (*.xml *.XML)
-
Save connections
-
Load connections
- Încarcare conexiuni
+
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
-
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -6895,220 +6868,220 @@ Acts on currently active editable layer
Find
-
Set global
-
Map extent
-
-180
-
90
- 90
+
Records
-
-90
-
180
- 180
+
From
-
Keywords
- Cuvinte cheie
+
Results
- Rezultate
+
>
- >
+
<<
-
Add WCS
-
Add WMS/WMTS
-
<
- <
+
Add WFS
-
Abstract
- Rezumat
+
Double click to see full record information
-
Type
- Tip
+
Title
- Titlu
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
-
Edit
- Editare
+
Delete
-
Save
- Salvare
+
Add default services
-
Load
-
Settings
- Setări
+
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
-
Search error
@@ -7120,71 +7093,71 @@ Acts on currently active editable layer
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
@@ -7195,100 +7168,100 @@ Acts on currently active editable layer
Message
- Mesaj
There are unsaved changes in model. Close modeler without saving?
-
Empty model
-
Save Model As Image
-
PNG files (*.png *.PNG)
-
Warning
- Atenţie
Please enter group and model names before saving
-
Save Model
-
Processing models (*.model)
-
I/O error
-
Unable to save edits. Reason:
%s
-
Can't save model
-
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
-
This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
Model saved
-
Model was correctly saved.
-
Open Model
-
Could not open model
-
+
+ The selected model could not be loaded.
+Wrong line: %s
+
Parameters
- Parametri
+ Parametri
MultipleInputDialog
Select all
-
Clear selection
- Ştergere selecţie
+
Toggle selection
-
@@ -7296,47 +7269,47 @@ See the log for more information.
Create a new Catalogue connection
-
Name
- Nume
+
URL
-
Save connection
- Salvare conexiune
+
Both Name and URL must be provided
-
Overwrite %s?
-
NotSupportedDbType
%s is not supported yet
-
NumberInputDialog
[Enter your formula here]
-
Values from data layers extents
-
Min X
@@ -7356,11 +7329,11 @@ See the log for more information.
Cellsize
-
Values from raster layers statistics
-
Mean
@@ -7380,23 +7353,23 @@ See the log for more information.
Values from QGIS map canvas
-
Current extent
- Extindere actuală
+
Full extent of all layers in map canvas
-
Wrong expression
-
The expression entered is not correct
-
@@ -7441,53 +7414,53 @@ See the log for more information.
OutputSelectionPanel
[Save to temporary file]
- [Salvează în fișier temporar]
+
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
- Salvare fişier
+
Select directory
-
PGDatabase
&Table
- &Tabel
Run &Vacuum Analyze
-
Sorry
- Ne pare rău
+
Select a TABLE for vacuum analyze.
-
PGTable
Table rule
-
@@ -7501,49 +7474,49 @@ See the log for more information.
PostGisDBPlugin
There is no defined database connection "%s".
-
PrepareAPIDialog
Error
- Eroare
+ Eroare
Done
- Îndeplinit
+
Processing
Processing
- Procesare
Toolbox
-
Graphical modeler
-
History and log
- Istoric și jurnal
+
Options and configuration
-
&Results viewer
-
&Commander
-
@@ -7551,12 +7524,12 @@ See the log for more information.
Processing Toolbox
-
Enter algorithm name to filter list
- Introduceți numele algoritmului pentru a filtra lista
+
Search...
@@ -7564,26 +7537,26 @@ See the log for more information.
Execute
-
Execute as batch process
-
Edit rendering styles for outputs
-
Recently used algorithms
-
Python
Python warning
-
An error has occured while executing Python code:
@@ -7607,23 +7580,23 @@ See the log for more information.
Couldn't load plugin '%s' from ['%s']
-
Couldn't load plugin %s
-
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
-
Error while unloading plugin %s
-
@@ -7638,83 +7611,83 @@ See the log for more information.
Compile APIs
-
Saving prepared file...
-
Saved
-
Done
- Îndeplinit
+
Error preparing file...
-
Hide Editor
-
Check Syntax
-
Run selected
-
Run Script
-
Undo
- Înapoi
+
Redo
-
Find Text
-
Cut
- Tăiere
+
Copy
- Copiere
+
Paste
- Lipire
+
Comment
- Comentariu
+
Uncomment
-
Share on codepad
-
Hide/Show Object Inspector
-
Select All
- Selectează tot
+
Settings
@@ -7722,149 +7695,149 @@ See the log for more information.
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
-
Connection error:
-
[Temporary file saved in {0}]
-
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
-
You have to save the file before running it.
-
Python Console: Save file
-
Script was correctly saved.
-
Click on button to restore all tabs from last session.
-
Restore tabs
-
Close
-
List all tabs
-
New Editor
-
Close Tab
-
Close All
-
Close Others
-
Save As
-
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
-
The file <b>'{0}'</b> has been modified, save changes?
-
Unable to restore the file:
{0}
-
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
-
Show Editor
-
Enter Selected
-
Object Inspector
-
Open file
- Deschidere fişier
+
Save
- Salvare
+
Save As...
- Salvare ca...
+
Run script
-
Show editor
-
Import Class
@@ -7872,103 +7845,103 @@ See the log for more information.
Import Processing class
-
Enter text to find...
-
Find Next
-
Find Previous
-
Case Sensitive
-
Whole Word
-
Wrap Around
-
Open File
-
Save Error
-
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
-
History saved successfully.
-
Session and file history cleared successfully.
-
History cleared successfully.
-
Command History
-
Show
-
Clear File
-
Clear Session
-
Python Console - Command History
-
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
@@ -8054,42 +8027,42 @@ See the log for more information.
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to goto next
-
Unable to alloc statement
-
Unable to prepare statement
-
Unable to get statement type
-
Unable to bind value
-
Unable to execute statement
-
@@ -8103,7 +8076,7 @@ See the log for more information.
Abort
- Renunţare
+ Renunţare
Estimating normal derivatives...
-
- minidump written to %1
minidump scris la %1
- writing of minidump to %1 failed (%2)
scrierea minidump-ului la %1 a eșuat (%2)
- creation of minidump to %1 failed (%2)
crearea minidump-ului la %1 a eșuat (%2)
- Crash dumped
-
QGIS starting in non-interactive mode not supported.
You are seeing this message most likely because you have no DISPLAY environment variable set.
-
Deleted vertices
-
Moved vertices
- Deplasare noduri
Selection extends beyond layer's coordinate system.
-
Python is not enabled in QGIS.
-
Plugin "%1" is not compatible with this version of QGIS.
It will be disabled.
-
Loaded %1 (package: %2)
-
Library name is %1
-
Failed to load %1 (Reason: %2)
-
Attempting to resolve the classFactory function
-
Loaded %1 (Path: %2)
- Încărcat %1 (Cale: %2)
Error Loading Plugin
- Eroare la încărcarea plugin-ului
There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
%1.
-
Unable to find the class factory for %1.
-
Plugin %1 did not return a valid type and cannot be loaded
-
Error when reading metadata of plugin %1
-
Could not open CRS database %1
Error(%2): %3
-
Generated CRS
A CRS automatically generated from layer info get this prefix for description
- CRS Generat
Saved user CRS [%1]
-
Can't open database: %1
- Nu s-a putut deschide baza de date: %1
Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
-
Cannot convert '%1' to double
-
Cannot convert '%1' to int
-
Cannot convert '%1' to DateTime
-
Cannot convert '%1' to Date
-
Cannot convert '%1' to Time
-
Cannot convert '%1' to Interval
-
- Cannot convert '%1' to boolean
-
- Domain max must be greater than domain min
-
- Exponent must be greater than 0
-
- Invalid regular expression '%1': %2
-
- Index is out of range
-
- Cannot convert '%1:%2:%3' to color
-
- Cannot convert '%1:%2:%3:%4' to color
-
- "%1" is not a valid color ramp
-
- Cannot convert '%1:%2:%3:%4:%5' to color
-
- function help for %1 missing
-
- Operators
Operatori
- Fields and Values
Câmpuri și valori
- Math
-
- Conversions
- Conversii
- Conditionals
-
second|seconds
list of words separated by | which reference years
-
minute|minutes
list of words separated by | which reference minutes
-
hour|hours
list of words separated by | which reference minutes hours
-
day|days
list of words separated by | which reference days
-
week|weeks
wordlist separated by | which reference weeks
-
month|months
list of words separated by | which reference months
-
year|years
list of words separated by | which reference years
-
- Date and Time
- Data și ora
- String
-
- Color
Culoare
- Geometry
- Geometrie
+
- Record
-
- No root node! Parsing failed?
-
- (no root)
-
- Unary minus only for numeric values.
-
- Can't preform /, *, or % on DateTime and Interval
-
- [unsupported type;%1; value:%2]
-
- Column '%1' not found
-
Exception: %1
- Excepție: %1
GEOS prior to 3.2 doesn't support GEOSInterpolate
-
segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
-
ring %1 with less than four points
-
ring %1 not closed
-
line %1 with less than two points
-
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
-
+
segments %1 and %2 of line %3 intersect at %4
-
ring %1 of polygon %2 not in exterior ring
-
GEOS error:could not produce geometry for GEOS (check log window)
-
GEOS error:%1
- Eroare GEOS: %1
polygon %1 inside polygon %2
-
Unknown geometry type
-
Unknown geometry type %1
-
Geometry validation was aborted.
-
Geometry has %1 errors.
-
Geometry is valid.
-
invalid line
-
Console
- Consolă
infinite
- infinite
No QGIS data provider plugins found in:
%1
-
Unable to instantiate the data provider plugin %1
-
Failed to load %1: %2
-
OGR driver for '%1' not found (OGR error: %2)
-
trimming attribute name '%1' to ten significant characters produces duplicate column name.
-
creation of data source failed (OGR error:%1)
-
creation of layer failed (OGR error:%1)
-
unsupported type for field %1
-
creation of field %1 failed (OGR error: %2)
-
created field %1 not found (OGR error: %2)
-
Invalid variant type for field %1[%2]: received %3 with type %4
-
no available replacement for internal fieldname ogc_fid found
-
Reserved attribute name ogc_fid replaced with %1
-
By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
Feature creation error (OGR error: %1)
-
Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
-
Feature write errors:
-
Stopping after %1 errors
-
Only %1 of %2 features written.
-
Arc/Info ASCII Coverage
-
Atlas BNA
- Atlas BNA
Comma Separated Value
-
ESRI Shapefile
- Fișier shape ESRI
FMEObjects Gateway
-
New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
Limit the number of coordinate pairs per line in multiline format.
-
Set the number of decimal for coordinates. Default value is 10.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
Set to YES to resize fields to their optimal size.
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
If not specified, GML2 will be used.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
Geography Markup Language [GML]
- Geography Markup Language [GML]
Generic Mapping Tools [GMT]
- Generic Mapping Tools [GMT]
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Keyhole Markup Language [KML]
- Keyhole Markup Language [KML]
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Mapinfo TAB
-
Mapinfo MIF
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Microstation DGN
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
S-57 Base file
-
Spatial Data Transfer Standard [SDTS]
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
Cannot overwrite a OGR layer in place
-
Failed to transform, writing stopped. (Exception: %1)
-
Unable to load %1 provider
-
Provider %1 has no %2 method
-
Loaded from Provider
-
Loading of layer failed
-
Creation error for features from #%1 to #%2. Provider errors was:
%3
-
Only %1 of %2 features written.
-
Reading raster part %1 of %2
-
Building Pyramids...
- Construire piramide...
Building pyramids failed - write access denied
-
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Multiband color
-
Paletted
-
Singleband gray
-
Singleband pseudocolor
-
Singleband color data
-
All Ramps
-
Single Symbol
-
Categorized
-
Graduated
-
Rule-based
-
Point displacement
-
Simple line
-
Marker line
-
Simple marker
-
SVG marker
-
Font marker
-
Ellipse marker
-
Vector Field marker
-
Simple fill
-
SVG fill
-
Centroid fill
-
Line pattern fill
-
Point pattern fill
-
Where is '%1' (original location: %2)?
-
QGIS rocks!
-
<html>QGIS rocks!</html>
-
Raster Histogram
-
Pixel Value
- Valoarea pixelului
Frequency
-
Internal Compass
-
Shows a QtSensors compass reading
-
Capture mouse coordinates in different CRS
-
Version 0.1
@@ -9829,8 +9800,9 @@ Only %1 of %2 features written.
Layers
- Straturi
+ Straturi
An event visualization tool - view images associated with vector features
-
Georeferencer GDAL
-
Could not reproject view extent: %1
-
Could not reproject layer extent: %1
-
Fitting a projective transform requires at least 4 corresponding points.
-
Location: %1
-
Location: %1<br>Mapset: %2
-
<b>Raster</b>
- <b>Raster</b>
Cannot open raster header
-
<b>Vector</b>
- <b>Vector</b>
Faces
-
Kernels
-
Features
- Entități spațiale
+
Driver
-
Key column
-
Cannot open region header
-
Other
-
3D Cols
-
Depths
-
E-W 3D resolution
-
N-S 3D resolution
-
Heatmap
- Reprezentare cromatică
+
Creates a Heatmap raster for the input point vector
-
Interpolation plugin
-
Oracle Spatial GeoRaster
-
Access Oracle Spatial GeoRaster
-
Raster Terrain Analysis plugin
-
A plugin for raster based terrain analysis
-
Road graph plugin
-
It solves the shortest path problem.
-
Processing 1/2 - %p%
- Procesare 1/2 - %p%
Processing 2/2 - %p%
- Procesare 2/2 - %p%
Intersects
-
Is disjoint
-
Touches
-
Crosses
- Cruciulițe
+
Within
-
Contains
-
Overlaps
-
Spatial Query Plugin
-
Instrument de import fișiere shape în PostgreSQL/PostGIS
+ SQL Anywhere plugin
+
+
+ Store vector layers within a SQL Anywhere database
- Stochează straturile vectoriale într-o bază de date SQL Anywhere
+ Stochează straturile vectoriale într-o bază de date SQL Anywhere
Zonal statistics plugin
-
Cannot open GDAL MEM dataset %1: %2
-
Cannot inittialize GDALWarpOperation :
-
Cannot ChunkAndWarpImage: %1
-
GDAL/OGR VSIFileHandler
-
This raster file has no bands and is invalid as a raster layer.
-
Cannot get GDAL raster band: %1
-
None
-
Couldn't open the data source: %1
-
Parse error at line %1 : %2
-
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
QGIS nu a găsit instalarea GRASS.
Doriţi să specificaţi calea (GISBASE) către instalarea GRASS?
@@ -10526,67 +10504,67 @@ Doriţi să specificaţi calea (GISBASE) către instalarea GRASS?
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
GISBASE is not set.
-
%1 is not a GRASS mapset.
-
Cannot start %1/etc/lock
-
Mapset is already in use.
-
Temporary directory %1 exists but is not writable
-
Cannot create temporary directory %1
-
Cannot create %1
- Nu se poate crea %1
Cannot remove mapset lock: %1
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
- Nu se poate deschide vectorul 1 din setul de hărți 2
+
Cannot read raster map region
-
Cannot read vector map region
-
Cannot open GISRC file
-
Cannot start module
-
command: %1 %2
- comanda: %1 %2
Cannot run module
-
command: %1 %2<br>%3<br>%4
-
Cannot get projection
-
Cannot get raster extent
-
Cannot get map info
-
Cannot get colors
-
Cannot query raster
-
Cannot draw raster
-
Loading of the MSSQL provider failed
-
Unsupported type for field %1
-
Creation of fields failed
-
OGR[%1] error %2: %3
-
Unable to create the datasource. %1 exists and overwrite flag is false.
-
Unable to get driver %1
-
Arc/Info Binary Coverage
-
OpenFileGDB
-
GeoPackage
-
Grass Vector
-
Ingres
- Ingres
Mapinfo File
-
OGDI Vectors
-
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
U.S. Census TIGER/Line
-
VRT - Virtual Datasource
-
X-Plane/Flightgear
-
All files
- Toate fişierele
Duplicate field (10 significant characters): %1
-
Creating the data source %1 failed: %2
-
Unknown vector type of %1
-
Creation of OGR data source %1 failed: %2
-
field %1 with unsupported type %2 skipped
-
creation of field %1 failed
-
Couldn't create file %1.qpj
-
-
- Fetching features failed.
-SQL:%1
-Error: %2
-
Fetching features failed.
+SQL:%1
+Error: %2
+
+
+ Oracle
Oracle
@@ -10873,35 +10851,35 @@ Error: %2
Connection to database failed
- Conexiunea cu baza de date a eşuat
+
No owner name found
-
Creation of data source %1 failed:
%2
-
Loading of the layer %1 failed
-
Field name clash found (%1 not remappable)
-
%1 not owner of the table %2.
-
Unable to delete layer %1.%2:
%3
-
Unable to clean metadata %1.%2:
%3
-
no result buffer
-
Fetching from cursor %1 failed
Database error: %2
-
Infinite filter rectangle specified
-
Unable to delete layer %1:
%2
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Consistency error in table '%1'. Style id should be unique
-
SQLite error: %2
SQL: %1
- Eroare SQLite: %2
-SQL: %1
+
SQLite error getting feature: %1
-
creation of data source %1 failed. %2
-
loading of the layer %1 failed
-
creation of fields failed
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints [%1]
-
Unable to delete table %1
-
Unable to delete table %1:
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
The extra plugin path '%1' does not exist !
-
Couldn't load SIP module.
-
Python support will be disabled.
-
Couldn't set SIP API versions.
-
Couldn't load QGIS utils.
-
An error occured during execution of following code:
-
Using fix %1.
-
Topology plugin
-
intersecting geometries
-
features too close
-
point not covered by segment
-
dangling end
-
duplicate geometry
-
pseudo node
-
overlaps
-
gaps
-
point not covered
-
line ends not covered by point
-
multipart feature
-
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Could not save symbology because:
%1
-
Attribute index %1 out of bounds [0;%2]
-
viewport
-
pad
-
Simplify transform error caught: %1
-
empty capabilities document
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- Legendă
+
QSpatiaLiteDriver
- Error opening database
- Eroare la deschiderea bazei de date
- Error closing database
-
- Unable to begin transaction
- Nu se poate începe tranzacția
+
- Unable to commit transaction
- Nu se poate comite tranzacția
+
- Unable to rollback transaction
- Rollback-ul tranzacției nu se poate realiza
+
@@ -11495,37 +11477,37 @@ Response was:
Unable to fetch row
-
No query
-
- Unable to execute statement
-
- Unable to execute multiple statements at a time
-
- Unable to reset statement
-
- Unable to bind parameters
-
- Parameter count mismatch
-
@@ -11533,82 +11515,82 @@ Response was:
No Error has occurred
-
Invalid file descriptor (port was not opened correctly)
-
Unable to allocate memory tables (POSIX)
-
Caught a non-blocked signal (POSIX)
-
Operation timed out (POSIX)
-
The file opened by the port is not a valid device
-
The port detected a break condition
- Portul a detectat o condiție de întrerupere
The port detected a framing error (usually caused by incorrect baud rate settings)
-
There was an I/O error while communicating with the port
-
Character buffer overrun
-
Receive buffer overflow
-
The port detected a parity error in the received data
-
Transmit buffer overflow
-
General read operation failure
-
General write operation failure
-
Unknown error: %1
-
@@ -11616,12 +11598,12 @@ Response was:
&Raster
- &Raster
+ &Raster
Multiple Instances of QgisApp
-
Log Messages
- Mesajele jurnalului
QGIS starting...
-
Checking provider plugins
-
Starting Python
- Startare Python
QGIS este pregatit pentru utilizare!
- Minimize
-
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
-
- Zoom
-
- Toggles between a predefined size and the window size set by the user
-
- Bring All to Front
-
- Bring forward all open windows
-
- Current Edits
-
- Error
Eroare
- Failed to open Python console:
-
Multiple instances of QGIS application object detected.
Please contact the developers.
-
QGIS - %1 ('%2')
- Panels
- Panouri
- Toolbars
- Bare de Instrumente
- Window
- Fereastră
- &Database
- Baza de &date
- &Web
- &Web
- Progress bar that displays the status of rendering layers and other time-intensive operations
Arată evoluţia randării hărţii sau a altor operaţii ce necesită mult timp
- Toggle extents and mouse position display
-
- Coordinate:
-
- Current map coordinate
-
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
-
- Current map coordinate (lat,lon or east,north)
-
- Scale
-
- Current map scale
-
- Displays the current map scale
Arată scara curentă a hărţii
- Current map scale (formatted as x:y)
-
- Render
Randare (Producere imagine)
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
Când sunt selectate, straturile sunt afişate. Când nu sunt selectate, straturile nu vor fi randate şi astfel se permite adaugarea unui mare număr de straturi înainte de randare.
- Toggle map rendering
Schimbă opţiunea de randare
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
-
- CRS status - Click to open coordinate reference system dialog
-
- Ready
Gata
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
Suprafata de previzualizare a hartii. Dimensiunea actuala a hartii este desenata cu un dreptunghi rosu. Orice layer poate fi adaugat in acest overview.
- Overview
- Vedere generală
+
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
Legenda hartii, ce arată toate straturile. Faceti click pe casuta de selectie pentru a arata sau a ascunde orice strat. Faceti dublu click pentru a customiza stratul respectiv.
- Layers
- Straturi
+ Straturi
- Map layer list that displays all layers in drawing order.
-
- Layer order
-
Private qgis.db
-
- < Blank >
-
-
- QGIS version
-
-
- QGIS code revision
-
-
- Compiled against Qt
- < Blank >
Running against Qt
- QGIS version
+
- Compiled against GDAL/OGR
- QGIS code revision
+
Compiled against Qt
+
+
+ Running against Qt
+
+
+ Compiled against GDAL/OGR
+
+
+ Running against GDAL/OGR
-
- PostgreSQL Client Version
-
- No support.
-
-
- SpatiaLite Version
- Fără suport.
SpatiaLite Version
+ Versiune SpatiaLite
+
+
+ QWT Version
- Versiune QWT
- PROJ.4 Version
- Versiune PROJ.4
- QScintilla2 Version
- QScintilla2 Version
- This copy of QGIS writes debugging output.
-
- %1 doesn't have any layers
-
-
- Invalid Data Source
-
Invalid Data Source
+
+
+ %1 is not a valid or recognized data source
-
- Vector
- Vector
+ Vector
- PostgreSQL
- PostgreSQL
+ PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
-
- %1 is an invalid layer - not loaded
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
- QGIS files
Fișiere QGIS
- No legend entries selected
-
- Select the layers and groups you want to remove in the legend.
-
- Remove layers and groups
Elimină straturi sau grupuri...
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
%1 (%2 tip nesuportat)
- http://qgis.org/en/site/forusers/commercial_support.html
-
- Do you want to save the current project? %1
Doriți să salvați proiectul curent? %1
- Invalid Layer
- Strat nevalid
+
- SpatiaLite
- SpatiaLite
+ SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
-
- Delimited Text
Text delimitat
- Cannot get Delimited Text select dialog from provider.
-
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
-
- Oracle
Oracle
- Cannot get Oracle select dialog from provider.
-
- WMS
WMS
- Cannot get WMS select dialog from provider.
-
- WCS
WCS
- Cannot get WCS select dialog from provider.
-
- WFS
WFS
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
-
- Auto-open Project
-
- Failed to open: %1
-
- Not valid project file: %1
-
- Project failed to open: %1
-
- Default template has been reopened: %1
-
- File not found: %1
-
- Calculating...
-
- Abort...
- Anulează...
+
- Choose a QGIS project file to open
-
- Loading project: %1
-
- Unable to open project
-
- Security warning
-
- project macros have been disabled.
-
- Enable macros
- Activează macro
+
- Project loaded
-
- Choose a QGIS project file
-
- Saved project to: %1
-
- Unable to save project %1
-
- Choose a file name to save the QGIS project file as
-
- Unable to load %1
-
- Choose a file name to save the map image as
- Alegeţi un nume de fişier pentru a salva imaginea hărţii ca
+
- Saved map image to %1
-
- Default system font substituted.
-
- Labeling
Etichetare
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
- Clasificare
+
Range
-
Unique Values
-
File Name
- Nume fișier
+
Value Map
-
Enumeration
-
Hidden
- Ascuns
+
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
-
Web View
-
Color
- Culoare
+
Relation Reference
-
Date/Time
-
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
-
- The project file is not writable.
-
- DXF export completed
Export DXF încheiat
- DXF export failed
Export DXF eșuat
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
Erori: %1
- Show more
Mai multe
- Labeling Options
-
- Please select a vector layer first
Vă rog să selectaţi mai întâi un strat vectorial
- Layer labeling settings
-
- Reading raster
Citire raster
- Cannot write raster error code: %1
-
- Saving done
-
-
- Export to vector file has been completed
-
Save error
- Export to vector file has been completed
+
- Save error
+
+
+ Export to vector file failed.
Error: %1
-
- No Layer Selected
-
- To delete features, you must select a vector layer in the legend
Pentru a șterge entități spațiale, alegeți mai întâi un strat vectorial din legendă
- No Vector Layer Selected
-
- Deleting features only works on vector layers
-
- Provider does not support deletion
-
- Data provider does not support deleting features
-
- Layer not editable
-
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
-
- No Features Selected
Nu s-au selectat entități
- The current layer has not selected features
Stratul curent nu conține entități selectate
- Delete features
-
- Delete %n feature(s)?
number of features to delete
-
-
+
- Features deleted
-
- Problem deleting features
-
- A problem occured during deletion of features
-
- %n feature(s) deleted.
number of features deleted
-
-
+
- Merging features...
-
- Abort
- Renunţare
+
- Create unique print composer title
-
- (title generated if left empty)
-
- Composer title
-
- Title can not be empty!
-
- Title already exists!
-
- Composer %1
-
- copy
-
- No active layer
- Nu este activat nici un layer
+
- No active layer found. Please select a layer in the layer list
-
-
- Active layer is not vector
-
-
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
-
Active layer is not vector
+
+
+ The merge features tool only works on vector layers. Please select a vector layer from the layer list
+
+
+ Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
-
- Not enough features selected
-
- The merge tool requires at least two selected features
-
- Merged feature attributes
-
- Merge failed
-
- An error occured during the merge operation
-
- Union operation canceled
-
-
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
-
+ The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
+
+
+ Merged features
-
- No active vector layer
- Nici un strat vectorial nu este activ
+
- To select features, choose a vector layer in the legend
- Pentru a selecta entități spațiale, alegeți un strat vectorial din legendă
+
- Features cut
-
- Features pasted
-
- Paste features
Lipire entități
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
Lipit
- New memory layer name
-
- Layer name
Numele stratului
- No features in clipboard.
Nu sunt entități în clipboard.
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
Nu se poate crea un nou strat
- Cannot create field %1 (%2,%3)
Nu se poate crea câmpul %1 (%2,%3)
- Cannot copy style: %1
-
- Cannot parse style: %1:%2:%3
-
- Cannot read style: %1
-
- Start editing failed
-
- Provider cannot be opened for editing
-
- Stop editing
- Încheiere editare
- Do you want to save the changes to layer %1?
-
- Problems during roll back
-
- Could not %1 changes to layer %2
Errors: %3
-
- rollback
-
- cancel
-
- Save
- Salvare
+ Salvare
- all
-
- Rollback
-
- Cancel
-
- Current edits
-
- %1 current changes for %2 layer(s)?
-
- copy
-
- Plugin layer
-
- Memory layer
-
- Duplicate layer:
- Duplicare strat:
- %1 (duplication resulted in invalid layer)
-
- Set scale visibility for selected layers
-
-
- Couldn't load Python support library: %1
-
Couldn't load Python support library: %1
+
+
+ Couldn't resolve python support library's instance() symbol.
-
- Python support ENABLED :-)
-
- There is a new version of QGIS available
-
- You are running a development version of QGIS
-
- You are running the current version of QGIS
-
- Would you like more information?
Doriți mai multe informații?
- QGIS Version Information
Informații despre versiunea QGIS
- QGIS - Changes since last release
-
- Unable to get current version information from server
Nu s-au putut obține de pe server informațiile despre versiunea curentă
-
- Connection refused - server may be down
-
-
- QGIS server was not found
-
-
- Unknown network socket error: %1
-
Connection refused - server may be down
+
+
+ QGIS server was not found
+
+
+ Unknown network socket error: %1
+
+
+ Unable to communicate with QGIS Version server
%1
-
- To perform a full histogram stretch, you need to have a raster layer selected.
-
- To change brightness or contrast, you need to have a raster layer selected.
-
- en
documentation language
en
- Layer is not valid
- Stratul nu este valid
- The layer %1 is not a valid layer and can not be added to the map
-
- The layer is not a valid layer and can not be added to the map
-
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
- Save?
- Salvez?
- Current CRS: %1 (OTFR enabled)
-
- Current CRS: %1 (OTFR disabled)
-
- Map coordinates for the current view extents
-
- Map coordinates at mouse cursor position
-
- Extents:
-
- Maptips require an active layer
-
- %n feature(s) selected on layer %1.
number of selected features
-
-
+
- Open a GDAL Supported Raster Data Source
-
- Error adding valid layer to map canvas
-
- Raster layer
-
- %1 is not a supported raster data source
-
- Unsupported Data Source
-
- Exit QGIS
Închidere QGIS
- Do you really want to quit QGIS?
Sigur doriți să închideți QGIS?
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
-
- <tt>Settings:Options:General</tt>
Menu path to setting options
-
- Warn me when opening a project file saved with an older version of QGIS
-
- Project file is older
-
- This project file was saved by an older version of QGIS
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
-
- Warning
- Atenţie
- This layer doesn't have a properties dialog.
-
- Authentication required
-
- Proxy authentication required
-
- SSL errors occured accessing URL %1:
-
-
Always ignore these errors?
-
- %n SSL errors occured
number of errors
-
-
+
@@ -13219,7 +13177,7 @@ Always ignore these errors?
Attributes changed
-
@@ -13243,14 +13201,14 @@ Always ignore these errors?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
-
QGIS is licensed under the GNU General Public License
-
<p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
-
Available QGIS Data Provider Plugins
-
Available Qt Database Plugins
-
Available Qt Image Plugins
-
Qt Image Plugin Search Paths <br>
-
@@ -13357,12 +13315,12 @@ p, li { white-space: pre-wrap; }
N&ame
-
Comment
- Comentariu
+ Comentariu
Width
- Lăţime
+ Lăţime
Precision
- Precizie
+ Precizie
@@ -13386,32 +13344,32 @@ p, li { white-space: pre-wrap; }
Add vector join
-
Join layer
- Îmbinare strat
+
Join field
- Îmbinare câmp
+
Target field
- Câmp ţintă
+
Create attribute index on join field
-
Cache join layer in virtual memory
-
@@ -13419,7 +13377,7 @@ p, li { white-space: pre-wrap; }
Add tab or group for %1
-
@@ -13427,27 +13385,27 @@ p, li { white-space: pre-wrap; }
Dialog
- Dialog
+ Dialog
Create category
-
as
-
a tab
-
a group in container
-
@@ -13455,12 +13413,12 @@ p, li { white-space: pre-wrap; }
Select frame color
-
Select background color
-
@@ -13473,27 +13431,27 @@ p, li { white-space: pre-wrap; }
Fixed map position
-
Map marker
-
Frame width
-
Background color
-
Frame color
-
@@ -13517,92 +13475,92 @@ p, li { white-space: pre-wrap; }
&Set Group CRS
-
&Zoom to Best Scale (100%)
-
&Stretch Using Current Extent
-
&Duplicate
-
&Set Layer Scale Visibility
-
&Set Layer CRS
-
Set &Project CRS from Layer
-
&Open Attribute Table
-
Save As...
- Salvare ca...
+
Save As Layer Definition File...
-
&Filter...
-
&Properties
-
Copy Style
-
Paste Style
-
QgsApplication
- Exception
- Excepţie
+ Excepţie
- unknown exception
-
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13614,65 +13572,66 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
-
+
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
Nu se poate deschide qgis.db
- Migration of private qgis.db failed.
%1
-
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
- Compozitor
+
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
@@ -13681,20 +13640,20 @@ User DB Path: %9
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Expression based filename
-
No matching atlas features found!
-
Expression based filter
-
@@ -13717,37 +13676,37 @@ Parser error:
Atlas Generation
-
Generate an atlas
-
Configuration
-
Coverage layer
-
Hidden coverage layer
-
Sort by
-
Sort direction
-
Filter with
-
Output
- Rezultat
+ Rezultat
Single file export when possible
-
Output filename expression
-
@@ -13783,7 +13742,7 @@ Parser error:
Select an action
File dialog window title
-
To create an attribute action, you must provide both a name and the action to perform.
-
Echo attribute's value
-
Get feature id
-
Selected field's value (Identify features tool)
-
Clicked coordinates (Run feature actions tool)
-
Search on web based on attribute's value
-
@@ -13841,7 +13800,7 @@ Parser error:
Attribute Actions
-
Capture
-
Open
- Deschidere
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Clicking the button will let you select an application to use as the action
-
Inserts an expression into the action
- Introduce expresie în acţiune
+
Insert expression...
- Introducere expresie...
+
Inserts the selected field into the action
- Introduce câmpul selectat în acţiune
+
Add to action list
-
Update selected action
-
@@ -14043,7 +14002,7 @@ Parser error:
Feature Attributes
-
@@ -14051,7 +14010,7 @@ Parser error:
Attributes changed
-
@@ -14059,18 +14018,18 @@ Parser error:
Load values from layer
-
Layer
- Strat
+ Strat
Description
- Descriere
+
Select data from attributes in selected layer.
-
View All
-
Insert NULL value on top
-
@@ -14099,12 +14058,12 @@ Parser error:
Ascending
- Ascendent
Descending
- Descendent
@@ -14112,22 +14071,22 @@ Parser error:
Select attributes
- Selectare atribute
Columns
- Coloane
+
Reset
- Resetare
+
Sorting
- Sortare
@@ -14135,7 +14094,7 @@ Parser error:
Attribute changed
-
@@ -14143,12 +14102,12 @@ Parser error:
Attribute Table
-
Case sensitive
-
Delete selected features (DEL)
-
Unselect all (Ctrl+U)
-
Move selection to top (Ctrl+T)
-
Invert selection (Ctrl+R)
-
Copy selected rows to clipboard (Ctrl+C)
-
Zoom map to the selected rows (Ctrl+J)
-
Pan map to the selected rows (Ctrl+P)
-
Toggle editing mode (Ctrl+E)
-
Save Edits (Ctrl+S)
-
Select features using an expression
-
New column (Ctrl+W)
-
Filters the visible features according to the current filter selection and filter string.
-
mMainViewButtonGroup
-
=
- =
+
Update All
-
Use the Expression Builder to define the filter
-
Show Edited and New Features
-
Show Features Visible On Map
-
The filter defines which features are currently shown in the list or on the table
-
Form View
-
Column Filter
-
Filter all the features which have been edited but not yet saved
-
Delete column (Ctrl+L)
-
Add feature
-
Open field calculator (Ctrl+I)
-
Attribute table - %1 (%n Feature(s))
feature count
-
-
+
Parsing error
-
Evaluation error
-
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
-
Update Filtered
-
Error
- Eroare
+
An error occured while evaluating the calculation string:
%1
-
Expression based filter
-
Attribute added
-
Attribute Error
-
The attribute could not be added to the layer
-
Deleted attribute
-
The attribute(s) could not be deleted
-
Attribute error
-
Geometryless feature added
-
@@ -14467,7 +14422,7 @@ Parser error:
feature id
-
@@ -14483,7 +14438,7 @@ Parser error:
Edit Widget Properties
-
Label on top
-
@@ -14506,62 +14461,62 @@ Parser error:
Lighten
-
Screen
-
Dodge
-
Addition
-
Darken
-
Multiply
-
Burn
-
Overlay
-
Soft light
-
Hard light
-
Difference
- Diferență
+
Subtract
-
@@ -14574,12 +14529,12 @@ Parser error:
&Delete
- Ştergere
+
&Zoom to
-
New bookmark
-
Unable to create the bookmark.
Driver:%1
Database:%2
-
Are you sure you want to delete %n bookmark(s)?
number of rows
-
-
+
Empty extent
- Extensiune goală
+
Reprojected extent is empty.
-
@@ -14691,7 +14642,7 @@ Database:%2
Cannot get WMS select dialog from provider.
-
Cannot set layer CRS
-
@@ -14714,37 +14665,37 @@ Database:%2
Param
-
Metadata
- Metadate
+
Preview
- Previzualizare
+
Stop rendering
-
Attributes
- Atribute
+
toolBar
-
New Shapefile
-
Refresh
- Actualizează
+
Set layer CRS
-
Manage WMS
-
Manage WMS Connections
-
Dialog
- Dialog
+ Dialog
Path
- Cale
+ Cale
@@ -14801,12 +14752,12 @@ Database:%2
Case Sensitive
-
Filter Pattern Syntax
-
Wildcard(s)
-
Regular Expression
-
Add as a favourite
-
Remove favourite
-
Fast scan this dir.
-
Refresh
- Actualizează
+
Add Selected Layers
- Adaugă straturile selectate
+
Filter Files
-
Filter files
-
@@ -14963,12 +14914,12 @@ Database:%2
Project home
-
Home
-
Solid
- Solid
+
No Brush
-
Cross
-
BDiagonal
-
FDiagonal
-
Diagonal X
-
Form
-
A calendar widget to enter a date.
-
Date format
-
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
Simbol
- Value
Valoare
- Label
Etichetă
@@ -15123,7 +15074,7 @@ Database:%2
Color ramp
- Gradient culoare
+
Classify
-
Join
-
Avansat
- Random colors
Culori aleatorii
- Symbol levels...
- Nivele simbol...
+
- High number of classes!
-
- Classification would yield %1 entries which might not be expected. Continue?
-
- Error
Eroare
- There are no available color ramps. You can add them in Style Manager.
-
+
+ The selected color ramp is not available.
+
The selected color ramp is not available.
-
-
- Confirm Delete
-
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
-
@@ -15213,7 +15164,7 @@ Should the existing classes be deleted before classification?
Character Selector
-
Current font family and style
-
@@ -15231,17 +15182,17 @@ Should the existing classes be deleted before classification?
Form
-
Representation for checked state
-
Representation for unchecked state
-
@@ -15249,35 +15200,30 @@ Should the existing classes be deleted before classification?
Shift-click to expand, then collapse others
-
Ctrl (or Alt)-click to toggle all
-
QgsColorButton
- Select Color
Selectează culoare
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -15299,7 +15245,7 @@ Should the existing classes be deleted before classification?
New color ramp...
-
@@ -15307,12 +15253,12 @@ Should the existing classes be deleted before classification?
Show compass
-
&About
-
@@ -15320,7 +15266,7 @@ Should the existing classes be deleted before classification?
Pixmap not found
-
@@ -15328,7 +15274,7 @@ Should the existing classes be deleted before classification?
Internal Compass
-
Close
-
Composer
- Compozitor
+
Print Composers
-
Normal
- Normal
+
Simulate photocopy (grayscale)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
View
- Vizualizare
+
Panels
-
Toolbars
-
Layout
-
Window
- Fereastră
Help
- Ajutor
+
Composition
- Compunere
+
Command history
-
Atlas generation
-
Set as atlas feature for %1
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
Choose a file name to save the map as
-
Empty filename pattern
-
The filename pattern is empty. A default one will be used.
-
Directory where to save PDF files
-
Unable to write into the directory
-
The given output directory is not writable. Cancelling.
-
Atlas processing error
-
Feature filter parser error: %1
-
Error creating %1.
-
Rendering maps...
-
Abort
- Renunţare
+ Renunţare
- Big image
Imagine mare
- To create image %1x%2 requires about %3 MB of memory. Proceed?
-
- Choose a file name to save the map image as
- Alegeţi un nume de fişier pentru a salva imaginea hărţii ca
+
- Memory Allocation Error
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
-
- Image export error
-
- Directory where to save image files
-
- Image format:
Formatul imaginii:
- SVG warning
avertisment SVG
- Don't show this message again
Nu mai arătaţi acest mesaj
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
-
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
-
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
-
- SVG Format
Format SVG
- Directory where to save SVG files
-
- SVG export error
-
- on page
-
- SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
- copiere
- Duplicating composer...
-
- Duplicate Composer
-
- Composer duplication failed.
-
- Save template
-
- Composer templates
-
- Save error
-
- Error, could not save file
-
- Load template
-
- Read error
-
- Error, could not read file
-
- Composer error
-
- Error, could not create new composer
-
- Loading template into composer...
-
- Project contains WMS layers
-
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
-
-
- Project contains composition effects
-
-
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
-
Print as raster
- Project contains composition effects
+
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
+
+
+ Print as raster
+
+
+ Landscape
-
@@ -15848,51 +15794,51 @@ Please try a lower resolution or a smaller papersize
Arrow outline width
-
Arrowhead width
-
Arrow color changed
-
Select arrow color
-
Arrow marker changed
-
Arrow start marker
-
Arrow end marker
-
Start marker svg file
-
End marker svg file
-
@@ -15905,17 +15851,17 @@ Please try a lower resolution or a smaller papersize
Arrow
-
Main properties
- Proprietăți principale
+
Line width
- Grosimea liniei
+
Arrow head width
-
Arrow markers
-
Default
-
None
-
Start marker
-
End marker
-
@@ -15975,32 +15921,32 @@ Please try a lower resolution or a smaller papersize
Center
- Centru
+
Right
- Dreapta
+
Left
- Stânga
+
Attribute
- Atribut
+
Heading
-
Alignment
- Aliniere
+
@@ -16013,22 +15959,22 @@ Please try a lower resolution or a smaller papersize
Composer
- Compozitor
+
Paper Navigation
-
Composer Item Actions
-
Composer Items
-
Zoom Full
- Vedere de ansamblu
+
Zoom full
-
Zoom in
- Măriţi pentru a vedea mai detaliat
+
Zoom out
- Micşoraţi
+
Zoom
-
Add Map
-
Add Label
-
Move Item
-
Add Scalebar
-
Refresh
- Actualizează
+
Snap to Grid
-
Snap to grid
-
Ctrl+Shift+'
-
Show Guides
-
Show guides
-
Snap to Guides
-
Snap to guides
-
Smart Guides
-
Smart guides
-
Clear Guides
-
Clear guides
-
Add image
-
Move Content
-
Move item content
-
Raise
-
Raise selected items
-
Lower
-
Lower selected items
-
Bring to Front
-
Move selected items to top
-
Send to Back
-
Move selected items to bottom
-
Load from Template
-
Load from template
-
Save as Template
-
Save as template
-
Align selected items left
-
Align center horizontal
-
Align selected items right
-
Align Top
-
Align selected items to top
-
Align Center Vertical
-
Align center vertical
-
Align Bottom
-
Align selected items bottom
-
&Quit
-
Quit
-
Add Arrow
-
Add arrow
-
Add Table
-
Add attribute table
-
Page Setup
-
Page setup
-
Pa&ste in Place
-
Paste in place
-
Delete selected items
-
De&select All
-
Deselect all
-
Select Next Item &Below
-
Select next item below
-
Select Next Item &Above
-
Select next item above
-
Pan Composer
-
Composer Options...
-
Show Rulers
-
Show rulers
-
Previous Feature
-
Next Feature
-
Export Atlas as PDF...
-
Export Atlas as PDF
-
Revert last change
-
Restore last change
-
Add html frame
-
Composer Manager
-
Composer manager
-
&New Composer
-
New composer
-
&Save Project
-
Save project
-
&Duplicate Composer
-
Duplicate composer
-
New from Template
-
New from template
-
Lock Selected Items
-
Unlock All
-
Unlock All Items
-
@@ -16853,17 +16799,17 @@ Please try a lower resolution or a smaller papersize
Left
- Stânga
+
Center
- Centru
+
Right
- Dreapta
+
@@ -16871,12 +16817,12 @@ Please try a lower resolution or a smaller papersize
Ascending
-
Descending
-
@@ -16884,42 +16830,42 @@ Please try a lower resolution or a smaller papersize
Use existing frames
-
Extend to next page
-
Repeat on every page
-
Repeat until finished
-
Change html url
-
Select HTML document
-
Change resize mode
-
Use smart breaks changed
-
@@ -16927,17 +16873,17 @@ Please try a lower resolution or a smaller papersize
HTML Frame
-
HTML frame
-
Main properties
- Proprietăți principale
+
Resize mode
-
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
-
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
-
- Background color changed
-
- Item position changed
-
- Item outline width
-
- Item frame join style
-
- Item frame toggled
-
- Item background toggled
-
- Select background color
-
- Select frame color
-
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
-
- Item rotation changed
-
@@ -17053,118 +16999,107 @@ Please try a lower resolution or a smaller papersize
Global Options
-
- Position and size
-
- Reference point
-
- X
X
- Y
Y
- Width
Lăţime
- Height
Înălţime
- Page
-
- ...
- ...
-
-
- Rotation
Rotire
- °
°
- Frame
Cadru
- mm
-
- Join style
- Stil îmbinare
+
- Rendering
Randare
- Blending mode
-
- Thickness
Grosime
- Color...
Culoare...
- Background
Fundal
- Transparency
Transparenţă
- Item ID
ID-ul itemului
- Id
Id
@@ -17174,43 +17109,43 @@ Please try a lower resolution or a smaller papersize
Label text HTML state changed
-
Label text changed
-
Label font changed
-
Label margin changed
-
Label color changed
-
- Insert expression
- Introducere expresie
+
- Label alignment changed
-
@@ -17314,8 +17249,9 @@ Please try a lower resolution or a smaller papersize
QgsComposerLegend
+ Legend
- Legendă
+ Legendă
@@ -17354,7 +17290,7 @@ Please try a lower resolution or a smaller papersize
Item wrapping changed
-
Legend title alignment changed
-
Legend column count
-
Legend split layers
-
Legend equal column width
-
Legend symbol width
-
Legend symbol height
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
Legend group space
-
Legend layer space
-
Legend symbol space
-
Legend icon label space
-
Title font changed
-
Legend group font changed
-
Legend layer font changed
-
Legend item font changed
-
Legend font color changed
-
Legend box space
-
Legend map changed
-
Legend item edited
-
Legend updated
-
Legend group added
-
-
- Map %1
- Harta %1
+
Map %1
+
+
+ None
-
@@ -17495,7 +17431,7 @@ Please try a lower resolution or a smaller papersize
Legend Options
-
Main properties
- Proprietăți principale
+
&Title
-
Map
- Hartă
+
Wrap text on
-
Legend items
-
Add group
-
Show feature count for each class of vector layer.
-
Fonts
-
Space above text using subgroup style.
-
Subgroup space
-
Space above symbol and symbol label.
-
Column space
-
Font color...
- Culoarea fontului...
+
Columns
- Coloane
+
Count
-
Equal column widths
-
Allow to split layer items into multiple columns.
-
Split layers
-
Spacing
-
Title alignment:
-
Left
- Stânga
+
Center
- Centru
+
Right
- Dreapta
+
Update legend. User defined labels are preserved.
-
Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
-
Update all
-
Title font...
-
Subgroup font...
-
Group font...
-
Item font...
-
Symbol
- Simbol
+
Symbol width
- Lăţimea simbolului
+
Symbol height
- Înălţimea simbolului
+
WMS LegendGraphic
-
Legend width
-
Legend height
-
Space above text using group style.
-
Group Space
-
Symbol space
-
Space between symbol icon and symbol label (symbol label left margin).
-
Icon label space
-
Box space
-
Space below title.
-
Title space
-
@@ -17759,119 +17695,119 @@ Please try a lower resolution or a smaller papersize
&Show
-
&Duplicate
-
&Remove
- &Elimină
+
Re&name
-
Empty composer
-
Specific
- Specific
+
Template error
-
Error, template file not found
-
Error, could not read file
-
Composer error
-
Error, could not create composer
-
Loading template into composer...
-
Error, could not load template file
-
Choose template
-
Composer templates
-
File system error
-
Error, could not open or create local directory
-
Remove composer
-
Do you really want to remove the map composer '%1'?
-
copy
-
Duplicating composer...
-
Duplicate Composer
-
Composer duplication failed.
-
@@ -17879,17 +17815,17 @@ Please try a lower resolution or a smaller papersize
Composer manager
-
New from template
-
Add
- Adaugă
+
Open template directory
-
user
- utilizator
+
default
-
QgsComposerMap
- Map %1
Harta %1
- Map will be printed here
-
-
- Grid %1
-
QgsComposerMapWidget
- Cache
-
- Render
Randare
- Rectangle
Dreptunghi
- Solid
- Solid
+
+
+ Cross
+
Cross
-
-
- Markers
-
-
- Decimal
Zecimal
- DegreeMinute
-
- DegreeMinuteSecond
-
+ No frame
- Fără cadre
+ Fără cadre
- Zebra
Zebră
- Map scale changed
-
- Map rotation changed
-
- Map extent changed
-
- Select font color
- Selectare culoare font
+
Select grid frame color
-
Select grid frame fill color
-
- Canvas items toggled
-
- None
-
- Overview frame style changed
-
- Overview centering mode changed
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- Unitate hartă
-
-
- Millimeter
- Milimetru
-
-
- Centimeter
-
-
- change...
- schimbă...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
-
- Grid interval changed
Intervalul grilei s-a schimbat
- Grid offset changed
Offsetul grilei s-a schimbat
- Grid line style changed
-
- Grid type changed
Tipul grilei s-a schimbat
- Grid cross width changed
+
+
+ Annotation font changed
-
- Label font changed
+
+
+ Annotation distance changed
-
- Annotation format changed
-
- Annotation toggled
-
- Changed annotation precision
-
- Changed grid frame style
-
- Changed grid frame width
+
+
+ Changed grid frame line thickness
-
- Grid frame color changed
-
- Grid frame first fill color changed
-
- Grid frame second fill color changed
-
- Inside frame
-
- Outside frame
-
- Disabled
-
- Horizontal
Orizontal
- Vertical
Vertical
- Annotation position changed
-
- Changed annotation direction
-
- Map %1
Harta %1
@@ -18257,380 +18127,290 @@ Please try a lower resolution or a smaller papersize
Map Options
-
- Map
Hartă
- Main properties
- Proprietăți principale
+
- Update preview
-
- Scale
Scară
- Map rotation
-
- Draw map canvas items
-
- Lock layers for map item
-
- Extents
Extent
- X max
X max
- Y min
Y min
- Y max
Y max
- Set to map canvas extent
-
- X min
X min
- View extent in map canvas
-
- Controlled by atlas
-
- Margin around feature
-
- %
- %
+
- Fixed scale
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
- Predefined scale (best fit)
-
+ Show grid
- Arată grilă
+ Arată grilă
+ Grid &type
- Tipul &grilei
+ Tipul &grilei
- Offset
-
- mm
-
- Blend mode
-
- Interval
Interval
- Grid frame
Cadrul grilei
- Frame size
-
- Frame line thickness
-
- Color...
- Culoare...
+
- Frame fill colors
-
- Marker style
-
-
- Overview blending mode
-
- Invert overview
-
- Center on overview
-
- X
X
- °
- °
+
- Y
Y
- Cross width
-
- Frame style
-
- Line style
Stilul liniei
- ...
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- Tipul rețelei
-
-
- CRS
-
-
- change...
schimbă...
- Interval units
-
-
- Map unit
- Unitate hartă
-
-
- Millimeter
- Milimetru
-
-
- Centimeter
-
-
- No frame
- Fără cadre
-
-
- Zebra
- Zebră
-
-
- Draw coordinates
-
- Format
Format
- Left
Stânga
- Right
Dreapta
- Top
Sus
- Bottom
Jos
- Font
Font
- Font...
Font...
- Font color
-
-
- Distance to map frame
- Distanța până la cadrul hărții
+
- Coordinate precision
Precizia coordonatelor
- Font color...
- Culoarea fontului...
+
- Overview
Vedere generală
- Overview frame
-
- Overview style
-
- Change...
Schimbă...
@@ -18640,51 +18420,51 @@ Please try a lower resolution or a smaller papersize
Change item position
-
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
- Compozitor
+
- Picture expression eval error: %1
-
@@ -18692,69 +18472,69 @@ Please try a lower resolution or a smaller papersize
Select svg or image file
-
Picture changed
-
- Expression based image path
-
- Picture rotation changed
-
- Select new preview directory
-
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
-
- Rotation map changed
-
- Map %1
Harta %1
- Creating icon for file %1
Creare pictogramă pentru fişierul %1
@@ -18779,7 +18559,7 @@ Please try a lower resolution or a smaller papersize
Image source
-
Expression
- Expresie
+
Resize mode
-
Placement
- Pozitionare
+
Zoom
-
Stretch
-
Clip
- Decupează
+
Zoom and resize frame
-
Resize frame to image size
-
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
- Mijloc
+
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
Loading previews...
-
Image search paths
-
Image rotation
-
QgsComposerScaleBar
- units
-
- km
km
- m
m
- miles
-
- ft
-
- Nm
-
QgsComposerScaleBarWidget
Single Box
-
Double Box
-
Line Ticks Middle
-
Line Ticks Down
-
Line Ticks Up
-
Numeric
Numeric
@@ -19023,149 +18803,124 @@ Please try a lower resolution or a smaller papersize
Nautical Miles
-
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
- Selectare culoare font
-
-
- Select stroke color
-
-
- Map %1
Harta %1
- Scalebar map changed
-
- Scalebar line width
-
- Scalebar segment size
-
- Scalebar segments left
-
- Number of scalebar segments changed
-
- Scalebar height changed
-
- Scalebar font changed
-
- Scalebar font color changed
-
- Scalebar color changed
-
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
-
- Scalebar unit text
-
- Scalebar map units per segment
-
- Scalebar style changed
-
- Scalebar label bar space
-
- Scalebar box content space
-
- Scalebar alignment
-
- Scalebar changed to map units
-
- Scalebar changed to feet
-
- Scalebar changed to nautical miles
-
- Scalebar changed to meters
-
- Scalebar line join style
-
- Scalebar line cap style
-
@@ -19173,17 +18928,17 @@ Please try a lower resolution or a smaller papersize
Barscale Options
-
Scalebar
-
Main properties
- Proprietăți principale
+
Map units per bar unit
-
Join style
- Stil îmbinare
+
Cap style
- Stil punct final
+
Fonts and colors
-
Font...
- Font...
+
Font color...
- Culoarea fontului...
+
Fill color...
-
Secondary fill color...
-
-
- Stroke color...
-
@@ -19320,39 +19070,39 @@ Please try a lower resolution or a smaller papersize
Ellipse
Elipsă
Rectangle
Dreptunghi
Triangle
Triunghi
- Shape style changed
-
- Shape radius changed
-
- Shape type changed
-
@@ -19365,32 +19115,32 @@ Please try a lower resolution or a smaller papersize
Shape
-
Main properties
- Proprietăți principale
+
Corner radius
-
mm
-
Style
- Stil
+
Change...
- Schimbă...
+
@@ -19398,22 +19148,22 @@ Please try a lower resolution or a smaller papersize
Descending
-
Ascending
-
Attribute
- Atribut
+
Sort Order
-
@@ -19422,43 +19172,43 @@ Please try a lower resolution or a smaller papersize
Map %1
- Harta %1
+
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
-
Table header alignment changed
-
Table layer changed
-
Table attribute settings
-
Table map changed
-
Select Font
-
Table header font
-
Table content font
-
Table grid stroke
-
Table grid color
-
Table grid toggled
-
Table visible only toggled
-
@@ -19515,37 +19265,37 @@ Please try a lower resolution or a smaller papersize
Attribute Table
-
Attribute table
-
Main properties
- Proprietăți principale
+
Layer
- Strat
+
Attributes...
-
Composer map
-
Maximum rows
-
Show only visible features
-
Refresh table data
-
Filter with
-
...
- ...
+
mm
-
Stroke width
-
Color...
- Culoare...
+
Fonts
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
- Stânga
+
Center
- Centru
+
Right
- Dreapta
+
@@ -19659,12 +19409,12 @@ Please try a lower resolution or a smaller papersize
Layers
- Straturi
+
Group
-
QGIS
- QGIS
+
Label added
-
Scale bar added
-
Legend added
-
Picture added
-
Table added
-
Shape added
-
Move item content
-
Arrow added
-
Map added
-
Html item added
-
Html frame added
-
Item moved
-
Zoom item content
-
QgsComposition
- Label added
-
- Map added
-
- Arrow added
-
- Scale bar added
-
- Shape added
-
- Picture added
-
- Legend added
-
- Table added
-
+
+ Aligned items left
+
+
+ Aligned items horizontal center
+
+
+ Aligned items vertical center
+
Aligned items left
-
-
- Aligned items horizontal center
-
-
- Aligned items vertical center
-
-
- Aligned items right
-
- Aligned items top
-
- Aligned items bottom
-
- Items locked
-
- Items unlocked
-
- Item z-order changed
-
- Remove item group
-
- Frame deleted
-
- Item deleted
-
- Multiframe removed
-
@@ -19918,148 +19668,148 @@ Please try a lower resolution or a smaller papersize
Landscape
-
Portrait
-
Map %1
- Harta %1
+
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
Personalizat
@@ -20069,131 +19819,117 @@ Please try a lower resolution or a smaller papersize
Composition
- Compunere
+
Paper and quality
-
- Presets
-
- ...
- ...
-
-
- Width
- Lăţime
+
- Height
- Înălţime
+
- Units
- Unităţi
+
- Number of pages
-
- Orientation
- Orientare
+
- Export resolution
-
- Print as raster
-
-
- Snap tolerance
-
-
- px
- px
+
Change...
- Schimbă...
+
- Page background
-
+ Grid
- Grilă
+ Grilă
- dpi
dpi
- World file on
-
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
-
- x:
x:
- y:
y:
+ Spacing
+
+
+ Snap to alignments
+
+
+ Tolerance
- Toleranţă
+ Toleranţă
@@ -20201,7 +19937,7 @@ Please try a lower resolution or a smaller papersize
Configure shortcuts
-
Shortcut
-
Change
- Schimba
+
Set none
-
Set default
-
Load...
-
Save...
-
Save shortcuts
-
XML file
-
All files
-
Saving shortcuts
-
Cannot write file %1:
%2.
-
Load shortcuts
-
Loading shortcuts
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an shortcuts exchange file.
-
The file contains shortcuts created with different locale, so you can't use it.
-
None
-
Set default (%1)
-
Input:
-
Shortcut conflict
-
This shortcut is already assigned to action %1. Reassign?
-
@@ -20333,17 +20069,17 @@ Please try a lower resolution or a smaller papersize
Error starting help viewer [%1]
-
Context help
-
<h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
-
@@ -20351,35 +20087,35 @@ Please try a lower resolution or a smaller papersize
The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
CRS
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
inverse transform
-
forward transform
-
%1 of
%2PROJ.4: %3 +to %4
Error: %5
-
@@ -20387,12 +20123,12 @@ Error: %5
Name
- Nume
+
Info
- Informaţii
+
@@ -20400,27 +20136,27 @@ Error: %5
colors
-
discrete
-
continuous
-
continuous (multi)
-
variants
-
@@ -20428,24 +20164,24 @@ Error: %5
Selections by theme
-
All by author
-
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
All Ramps (%1)
-
%1 directory details
-
%1 gradient details
-
@@ -20478,28 +20214,28 @@ and current file is [%3]
cpt-city color ramp
-
Selection and preview
-
License
- Licență
+
Palette
- Paletă
+
Path
- Cale
+
Author(s)
-
Source
- Sursă
+
Details
-
Save as standard gradient
-
@@ -20532,28 +20268,28 @@ and current file is [%3]
Enter Credentials
-
Username
-
Password
-
TextLabel
-
Realm
-
@@ -20561,7 +20297,7 @@ and current file is [%3]
Control rendering order
-
@@ -20582,12 +20318,12 @@ and current file is [%3]
new CRS
-
The proj4 definition of '%1' is not valid.
-
Custom Coordinate Reference System Definition
-
ID
-
You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
-
Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
-
Destination CRS
-
Name:
-
Parameters:
- Parametri:
+
Copy
existing CRS
-
Add new CRS
-
Remove
-
Choose a customization INI file
-
Customization files (*.ini)
-
@@ -20735,27 +20471,27 @@ and current file is [%3]
Customization
-
Enable customization
-
toolBar
-
Catch
-
Switch to catching widgets in main application
-
Description...
-
Edit...
- Editare...
+
Paste
- Lipire
+
Copy
- Copiere
+
Clear
- Şterge
+
string
-
int
-
double
-
Field type:
-
integer
-
unknown type
-
Data defined override
-
expression
-
field
- câmp
+
Deactivate
-
Activate
-
Attribute field
- Alocaţi câmp
+
No matching field types found
-
Expression
- Expresie
+
Current:
-
Data definition description
-
undefined
-
Parse error: %1
-
'%1' field missing
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
yes
- da
+
no
- nu
+
<b>Usage:</b><br>%1<br>
-
<b>Expected input:</b><br>%1<br>
-
<b>Valid input types:</b><br>%1<br>
-
<b>Current definition %1:</b><br>%2
-
string
-
bool [<b>1</b>=True|<b>0</b>=False]
-
string of variable length
-
int [<= 0 =>]
-
int [>= 0]
-
int [>= 1]
-
double [<= 0.0 =>]
-
double [>= 0.0]
-
double coord [<b>X,Y</b>] as <= 0.0 =>
-
double [-180.0 - 180.0]
-
int [0-100]
-
string [<b>r,g,b</b>] as int 0-255
-
string [<b>r,g,b,a</b>] as int 0-255
-
@@ -21049,57 +20785,57 @@ and current file is [%3]
Data defined properties
-
Property
- Proprietate
+
Expression
- Expresie
+
Help
- Ajutor
+
double
-
'<red>,<green>,<blue>,<alpha>'
-
'<filename>'
-
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -21107,68 +20843,68 @@ and current file is [%3]
Form
-
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
-
custom
-
preview
-
@@ -21176,13 +20912,13 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
unknown
- necunoscut
+
@@ -21190,7 +20926,7 @@ and current file is [%3]
Select datum transformations
-
Remember selection
-
Hide deprecated
-
Destination CRS
-
Source CRS
-
Layer
- Strat
+
@@ -21284,7 +21020,7 @@ and current file is [%3]
Hold dialog open
-
Copyright Label Decoration
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
Color
- Culoare
+
@@ -21438,7 +21174,7 @@ p, li { white-space: pre-wrap; }
Grid properties
-
Coordinate precision
- Precizia coordonatelor
+
Marker symbol
-
Offset X
-
Offset Y
-
Update Interval / Offset from
-
Canvas Extents
-
Active Raster Layer
-
Marker
- Marcator
+
Boundary direction
-
Horizontal and Vertical
-
@@ -21561,27 +21297,27 @@ p, li { white-space: pre-wrap; }
Bottom Left
- Stanga jos
+
Top Left
- Stanga sus
+
Top Right
- Dreapta sus
+
Bottom Right
- Dreapta jos
+
North arrow pixmap not found
-
@@ -21589,12 +21325,12 @@ p, li { white-space: pre-wrap; }
North Arrow Decoration
-
Preview of north arrow
-
Placement
- Pozitionare
+
Placement on screen
-
Top Left
- Stanga sus
+
Top Right
- Dreapta sus
+
Bottom Left
- Stanga jos
+
Bottom Right
- Dreapta jos
+
Enable North Arrow
-
Set direction automatically
-
Pixmap not found
-
@@ -21652,42 +21388,42 @@ p, li { white-space: pre-wrap; }
Bottom Left
- Stanga jos
+
Top Left
- Stanga sus
+
Top Right
- Dreapta sus
+
Bottom Right
- Dreapta jos
+
Tick Down
-
Tick Up
-
Bar
-
Box
- Box (Dimensiuni)
+
Scale Bar Decoration
-
Placement
- Pozitionare
+
Top Left
- Stanga sus
+
Top Right
- Dreapta sus
+
Bottom Left
- Stanga jos
+
Bottom Right
- Dreapta jos
+
Scale bar style
-
Select the style of the scale bar
-
Tick Down
-
Tick Up
-
Box
- Box (Dimensiuni)
+
Bar
-
Color of bar
-
Size of bar
-
Enable scale bar
-
Automatically snap to round number on resize
-
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -21952,47 +21688,47 @@ p, li { white-space: pre-wrap; }
No layer name
-
Please enter a layer name before adding the layer to the map
-
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Invalid regular expression
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Choose a delimited text file to open
-
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
Regular expression is not valid
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
-
Layer name
- Numele stratului
+
Name to display in the map legend
-
Name displayed in the map legend
-
Browse to find the delimited text file to be processed
-
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
-
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
Tab
-
Encoding
- Codificare
+
Select the file encoding
-
X and Y coordinates are expressed in degrees/minutes/seconds
-
DMS coordinates
-
Geometry field
-
Name of the field containing well known text value
-
Geometry type
-
Detect
-
Point
- Punct
+
Line
- Linie
+
Polygon
- Poligon
+
Record options
-
Field options
-
File format
-
Number of header lines to discard
-
The number of lines to discard from the beginning of the file
-
Field names are read from the first record. If not selected then fields are numbered
-
First record has field names
-
CSV (comma separated values)
-
Fields are defined by the specified delimiter, quote, and escape characters
-
Custom delimiters
-
Regular expression delimiter
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use spatial index
-
Use an index to improve performance of subset filters (set in layer properties)
-
Use subset index
-
Watch for changes to the file by other applications while QGIS is running
-
Watch file
-
Geometry definition
-
Geometry is a point defined by X and Y coordinate fields
-
Point coordinates
-
Geometry is read as a well known text string from the selected fields
-
Well known text (WKT)
-
The file contains only attribute information - it will not be displayed on the map
-
No geometry (attribute only table)
-
Trim leading and trailing spaces from fields
-
Trim fields
-
Discard empty fields in each record
-
Discard empty fields
-
Number fields use comma for a decimal separator
-
Decimal separator is comma
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
- Expresie
+
Regular expression used to split each line into fields
-
Layer settings
-
Sample data
-
Name of the field containing x values
-
Name of the field containing y values
-
@@ -22530,17 +22266,17 @@ p, li { white-space: pre-wrap; }
Heading Label
-
Detail label
-
Category label
-
@@ -22554,17 +22290,17 @@ p, li { white-space: pre-wrap; }
Map units
- Unităţi hartă
+
Around Point
-
Over Point
-
Free
-
x-height
-
None
-
Top
- Sus
+
Right
- Dreapta
+
Bottom
- Jos
+
Left
- Stânga
+
Unknown diagram type.
-
The diagram type '%1' is unknown. A default type is selected for you.
-
Bar length: Scale linearly, such as the following value matches the specified size.
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Diagrams: No attributes added.
-
Interpolation value
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
Pen color
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -22730,7 +22466,7 @@ p, li { white-space: pre-wrap; }
Display diagrams
-
Appearance
-
Background color
-
Line color
-
Line width
- Grosimea liniei
+
Bar width
-
Start Angle
-
Only show diagrams with a size inside the specified range.
-
Hide diagrams with a size outside the specified range.
-
Scale dependent visibility
-
Size
-
Fixed size
-
Size units
-
Scale linearly between 0 and the following attribute value / diagram size:
-
Edit expression
-
Find maximum value
-
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
Increase size of small diagrams
-
Add expression
-
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
Run layer action
-
Open form
-
Loading features...
-
Abort
- Renunţare
+
Attribute table
-
%1 features loaded.
-
@@ -23128,17 +22864,17 @@ Parser error:
...
- ...
+
Expression
- Expresie
+
Column Preview
-
@@ -23146,12 +22882,12 @@ Parser error:
Form
-
Dummy Text
-
@@ -23159,12 +22895,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -23172,57 +22908,57 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
- Salvare ca
+
...
- ...
+
No symbology
- Fără simbolizare
+
Feature symbology
-
Symbol layer symbology
-
Select all
-
Unselect all
-
Export features intersecting the current map extent
-
@@ -23231,12 +22967,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -23244,52 +22980,52 @@ Parser error:
Symbol width
- Lăţimea simbolului
+
Symbol height
- Înălţimea simbolului
+
Rotation
-
Outline width
- Lăţimea conturului
+
Fill color
-
Border color
-
Symbol name
-
Offset
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -23302,7 +23038,7 @@ Parser error:
Cancel &All
-
@@ -23320,17 +23056,17 @@ Parser error:
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
Draw text as outlines (recommended)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
Automated Placement Engine
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23426,7 +23162,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -23463,7 +23199,7 @@ p, li { white-space: pre-wrap; }
Joins two values together into a string
-
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Recent (%1)
-
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
-
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
Equal operator
-
Addition operator
-
Subtraction operator
-
Division operator
-
Multiplication operator
-
Power operator
-
String Concatenation
-
Open Bracket
-
Close Bracket
-
Select By Expression
-
Close
-
...
- ...
+
Select
- Selectează
+
Add to selection
-
Remove from selection
-
Select within selection
-
@@ -23768,22 +23504,22 @@ p, li { white-space: pre-wrap; }
layer
- strat
+
map view
-
user defined
- definit de utilizator
+
Extent (current: %1)
-
@@ -23796,32 +23532,32 @@ p, li { white-space: pre-wrap; }
West
- Vest
+
East
- Est
+
North
- Nord
+
South
- Sud
+
Layer extent
-
Map view extent
-
@@ -23837,7 +23573,7 @@ p, li { white-space: pre-wrap; }
Dialog
- Dialog
+
@@ -23851,7 +23587,7 @@ p, li { white-space: pre-wrap; }
Only update %1 selected features
-
An error occured while evaluating the calculation string:
%1
-
Please enter a field name
-
The expression is invalid see (more info) for details
-
@@ -23897,37 +23633,37 @@ p, li { white-space: pre-wrap; }
Field calculator
- Calculator pentru câmpuri
+
Only update selected features
-
Create a new field
-
Output field name
-
Output field type
-
Output field width
-
Width of complete output. For example 123,456 means 6 as field width.
-
Expression dialog
-
@@ -23975,7 +23711,7 @@ p, li { white-space: pre-wrap; }
Type name
-
Edit widget
-
Layer
- Strat
+
Field
- Câmp
+
The attribute could not be inserted. The name already exists in the table.
-
Added attribute
-
Deleted attribute
-
Line edit
-
Value map
-
Edit range
-
Slider range
-
Dial range
-
File name
-
Enumeration
-
Immutable
-
Checkbox
-
Text edit
-
Value relation
-
Photo
-
Web view
-
Color
- Culoare
+
Editor Widget
-
Select edit form
-
Click to toggle table editing
-
Toggle editing mode
-
Fields
- Câmpuri
+
Relations
-
Suppress attribute form pop-up after feature creation
-
Default
-
On
-
Off
-
Drag and drop designer
-
Attribute editor layout:
-
Python Init function
-
@@ -24301,12 +24037,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
...
- ...
+
Select a file
-
@@ -24315,13 +24051,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
@@ -24329,12 +24065,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Delete
-
Qt designer file
-
@@ -24342,7 +24078,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Form annotation
-
map units
-
Recenter
-
Remove
-
@@ -24383,12 +24119,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
internal GPS
-
local gpsd
-
@@ -24414,12 +24150,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
GPS Device Editor
-
Devices
-
Update
- Actualizare
+
Device name
-
This is the name of the device as it will appear in the lists
-
Track download
-
Route upload
-
Waypoint download
-
The command that is used to download routes from the device
-
Route download
-
The command that is used to upload waypoints to the device
-
Track upload
-
The command that is used to download tracks from the device
-
The command that is used to upload routes to the device
-
The command that is used to download waypoints from the device
-
The command that is used to upload tracks to the device
-
Waypoint upload
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -24535,62 +24271,62 @@ p, li { white-space: pre-wrap; }
No path to the GPS port is specified. Please enter a path then try again.
-
Connecting...
- Conectare...
+
Connecting to GPS device...
-
Timed out!
-
Failed to connect to GPS device.
-
Connected!
-
Dis&connect
-
Connected to GPS device.
-
Error opening log file.
-
Disconnected...
-
&Connect
-
Disconnected from GPS device.
-
No fix
-
Differential
-
Non-differential
-
No position
-
Valid
- Valid
+
Invalid
-
Not enough vertices
-
Cannot close a line feature until it has at least two vertices.
-
Cannot close a polygon feature until it has at least three vertices.
-
Feature added
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
Cannot add feature. Unknown WKB type. Choose a different layer and try again.
-
Save GPS log file as
-
NMEA files
-
&Add feature
-
&Add Point
-
&Add Line
-
&Add Polygon
-
@@ -24743,12 +24479,12 @@ Errors: %2
GPS Connect
-
&Add feature
-
Add track point
-
Reset track
-
Position
- Poziție
+
Signal
-
Satellite
-
Options
- Opţiuni
+
Debug
-
&Connect
-
latitude of position fix (degrees)
-
Longitude
-
longitude of position fix (degrees)
-
antenna altitude with respect to geoid (mean sea level)
-
Altitude
-
Latitude
-
Time of fix
-
date/time of position fix (UTC)
-
speed over ground
-
track direction (degrees)
-
Direction
- Direcţie
+
Horizontal Dilution of Precision
-
HDOP
-
Vertical Dilution of Precision
-
Position Dilution of Precision
-
GPS receiver configuration 2D/3D mode: Automatic or Manual
-
position fix dimensions: 2D, 3D or No fix
-
quality of the position fix: Differential, Non-differential or No position
-
Quality
-
position fix status: Valid or Invalid
-
Status
-
number of satellites used in the position fix
-
Satellites
-
H accurancy
-
V accurancy
-
Connection
-
Autodetect
-
Serial device
-
Refresh serial device list
-
Port
- Port
+
Host
-
Device
-
00000;
-
gpsd
-
Internal
-
Digitizing
- Digitizare
+
Track
-
Automatically add points
-
Track width in pixels
-
width
-
Color
- Culoare
+
save layer after every feature added
-
Automatically save added feature
-
save GPS data (NMEA sentences) to a file
-
Log File
-
browse for log file
-
Map centering
-
when leaving
-
% of map extent
-
Cursor
-
Small
-
Large
-
@@ -25114,18 +24850,18 @@ gray = no data
&GPS Tools
-
&Create new GPX layer
-
Creates a new GPX layer and displays it on the map canvas
-
Save new GPX file as...
-
GPS eXchange file
-
Could not create file
-
Unable to create a GPX file with the given name. Try again with another name or in another directory.
-
GPX Loader
-
Unable to read the selected file.
Please reselect a valid file.
-
Could not convert data from %1!
-
Error converting data
-
Not supported
-
This device does not support downloading of %1.
-
Downloading data...
- Descărcare date...
+
Could not download data from GPS!
-
Error downloading data
-
This device does not support uploading of %1.
-
Uploading data...
-
Error while uploading data to GPS!
-
Error uploading data
-
@@ -25276,26 +25012,26 @@ Please reselect a valid file.
Waypoints
-
Routes
-
Tracks
-
Choose a file name to save under
-
Waypoints from a route
-
Waypoints from a track
-
Route from waypoints
-
Track from waypoints
-
GPS Tools
- Instrumente GPS
+
Load GPX file
-
File
- Fişier
+
Feature types
-
Waypoints
-
Routes
-
Tracks
-
Feature type
-
Layer name
- Numele stratului
+
GPX output file
-
Save As...
- Salvare ca...
+
Download from GPS
-
GPS device
-
Edit devices...
-
Port
- Port
+
Refresh
- Actualizează
+
Output file
-
Upload to GPS
-
Data layer
-
Edit devices
-
GPX Conversions
-
GPX input file
-
Conversion
- Conversie
+
@@ -25498,17 +25234,17 @@ Please reselect a valid file.
Bad URI - you need to specify the feature type.
-
GPS eXchange file
-
Digitized in QGIS
-
@@ -25516,52 +25252,52 @@ Please reselect a valid file.
Dataset Description
-
Band %1
- bandă %1
+
X: %1 Y: %2 Bands: %3
-
Dimensions
- Dimensiuni
+
Origin
-
Pixel Size
-
Band
- Bandă
+
Format not supported
-
Cannot read data
-
Cannot get GDAL raster band: %1
-
@@ -25569,17 +25305,17 @@ Please reselect a valid file.
Define this layer's coordinate reference system:
-
This layer appears to have no projection specification.
-
By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.
-
@@ -25587,7 +25323,7 @@ Please reselect a valid file.
Coordinate Reference System Selector
- Selector sistem de coordonate de referinţă
+
@@ -25595,17 +25331,17 @@ Please reselect a valid file.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -25613,122 +25349,122 @@ Please reselect a valid file.
A5 (148x210 mm)
- A5 (148x210 mm)
+
A4 (210x297 mm)
- A4 (210x297 mm)
+
A3 (297x420 mm)
- A3 (297x420 mm)
+
A2 (420x594 mm)
- A2 (420x594 mm)
+
A1 (594x841 mm)
- A1 (594x841 mm)
+
A0 (841x1189 mm)
- A0 (841x1189 mm)
+
B5 (176 x 250 mm)
- B5 (176 x 250 mm)
+
B4 (250 x 353 mm)
- B4 (250 x 353 mm)
+
B3 (353 x 500 mm)
- B3 (353 x 500 mm)
+
B2 (500 x 707 mm)
- B2 (500 x 707 mm)
+
B1 (707 x 1000 mm)
- B1 (707 x 1000 mm)
+
B0 (1000 x 1414 mm)
- B0 (1000 x 1414 mm)
+
Legal (8.5x14 inches)
-
ANSI A (Letter; 8.5x11 inches)
-
ANSI B (Tabloid; 11x17 inches)
-
ANSI C (17x22 inches)
-
ANSI D (22x34 inches)
-
ANSI E (34x44 inches)
-
Arch A (9x12 inches)
-
Arch B (12x18 inches)
-
Arch C (18x24 inches)
-
Arch D (24x36 inches)
-
Arch E (36x48 inches)
-
Arch E1 (30x42 inches)
-
@@ -25736,73 +25472,73 @@ Please reselect a valid file.
Configure Georeferencer
-
Point tip
-
Show IDs
-
Show coords
-
Residual units
-
Pixels
-
Use map units if possible
-
PDF report
-
Left margin
-
mm
-
Right margin
-
Show Georeferencer window docked
-
PDF map
-
Paper size
-
@@ -25810,16 +25546,16 @@ Please reselect a valid file.
Description georeferencer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
@@ -25837,37 +25573,37 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
All other files (*)
-
Open raster
-
%1 is not a supported raster data source
-
Unsupported Data Source
-
Raster loaded: %1
-
Georeferencer - %1
-
Info
- Informaţii
+
GDAL scripting is not supported for %1 transformation
-
Load GCP points
-
GCP file
-
No GCP points to save
-
Save GCP points
-
Please load raster to be georeferenced
-
Help
- Ajutor
+
Panels
-
Toolbars
-
Current transform parametrisation
-
Coordinate:
-
Current map coordinate
-
None
-
Coordinate of image(column/line)
-
Unable to open GCP points file %1
-
Save GCPs
-
Save GCP points?
-
Failed to get linear transform parameters
-
World file exists
-
<p>The selected file already seems to have a world file! Do you want to replace it with the new world file?</p>
-
Failed to compute GCP transform: Transform is not solvable
-
Error
- Eroare
+
Could not write to %1
-
map units
-
pixels
- pixeli
+
Transformation parameters
-
Translation x
-
Translation y
-
Scale x
-
Scale y
-
Rotation [degrees]
-
Mean error [%1]
-
Residuals
-
yes
- da
+
no
- nu
+
Translation (%1, %2)
-
Scale (%1, %2)
-
Rotation: %1
-
Mean error: %1
-
Copy in clipboard
-
%1
- %1% {1?}
+
GDAL script
-
Please set transformation type
-
Please set output raster name
-
%1 requires at least %2 GCPs. Please define more
- %1 necesită cel puţin %2 GCP. Vă rugăm definiţi mai multe
+
Linear
-
Helmert
- Helmert
+
Polynomial 1
- Polinomial 1
+
Polynomial 2
- Polinomial 2
+
Polynomial 3
- Polinomial 3
+
Thin plate spline (TPS)
- TPS
+
Projective
- Proiectiv
+
Not set
-
@@ -26170,221 +25906,221 @@ p, li { white-space: pre-wrap; }
Georeferencer
-
File
- Fişier
+
View
- Vizualizare
+
Edit
- Editare
+
Settings
- Setări
+
GCP table
-
toolBar
-
Open raster
-
Ctrl+O
- Ctrl+O
+
Zoom In
- Apropiere
+
Ctrl++
- Ctrl++
+
Zoom Out
- Depărtare
+
Ctrl+-
- Ctrl+-
+
Zoom to Layer
-
Ctrl+Shift+F
- Ctrl+Shift+F
+
Pan
-
Transformation settings
- Setări transformare
+
Add point
-
Ctrl+A
- Ctrl+A
+
Delete point
-
Ctrl+D
- Ctrl+D
+
Quit
-
Start georeferencing
-
Ctrl+G
- Ctrl+G
+
Generate GDAL script
-
Ctrl+C
- Ctrl+C
+
Link Georeferencer to QGIS
-
Link QGIS to Georeferencer
-
Save GCP points as...
-
Ctrl+S
- Ctrl+S
+
Load GCP points
-
Ctrl+L
- Ctrl+L
+
Configure Georeferencer
-
Ctrl+P
- Ctrl+P
+
Raster properties
-
Move GCP point
-
Zoom Next
-
Zoom Last
-
Local histogram stretch
-
Full histogram stretch
-
@@ -26408,12 +26144,12 @@ p, li { white-space: pre-wrap; }
Open raster file
-
Invalid Path: The file is either unreadable or does not exist
-
Do you want to add the datasource anyway?
-
Open 3D model file
-
Model files
-
@@ -26441,12 +26177,12 @@ p, li { white-space: pre-wrap; }
Globe Settings
- Setări Glob
+
Elevation
- Elevaţie
+
Map
- Hartă
+
Base Layer
-
URL
-
TextLabel
-
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Cache
-
Path
- Cale
+
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Point Layer
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -26652,32 +26388,32 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Abort
- Renunţare
+
Error: %1 on line %2, column %3
-
WFS
- WFS
+
GML Getfeature network request failed with error: %1
-
Network
-
@@ -26685,7 +26421,7 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
@@ -26693,90 +26429,90 @@ p, li { white-space: pre-wrap; }
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Color (start)
-
Color (end)
-
Angle
-
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
QgsGraduatedSymbolRendererV2Model
- Symbol
Simbol
- Value
Valoare
- Label
- Etichetă
+
@@ -26794,7 +26530,7 @@ p, li { white-space: pre-wrap; }
Change...
- Schimbă...
+
Color ramp
- Gradient culoare
+
Quantile (Equal Count)
-
Natural Breaks (Jenks)
-
Standard Deviation
- Abaterea standard
+
Pretty Breaks
-
Invert
- Inversează
+
Delete all
- Șterge tot
+
Avansat
- Symbol levels...
- Nivele simbol...
+
- Error
Eroare
- There are no available color ramps. You can add them in Style Manager.
-
- The selected color ramp is not available.
-
- Warning
-
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
-
- Renderer creation has failed.
-
@@ -26948,32 +26684,32 @@ Press cancel to abort breaks calculation or OK to continue.
GRASS Attributes
-
Tab 1
-
result
-
Update database record
-
Update
- Actualizare
+
Add new category using settings in GRASS Edit toolbox
-
Add selected map to canvas
-
Copy selected map
-
Rename selected map
-
Delete selected map
-
Set current region to selected map
-
New name
-
New name for layer "%1"
-
Cannot copy map %1@%2
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot rename map %1
-
Remove the selected layer(s) from canvas before continue.
-
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
-
+
Cannot delete map %1
-
Cannot write new region
-
@@ -27121,32 +26853,32 @@ Press cancel to abort breaks calculation or OK to continue.
You are not owner of the mapset, cannot open the vector for editing.
-
Cannot open vector for update.
- Nu se poate deschide vectorul pentru actualizare.
+
Edit tools
-
New point
-
New line
-
New boundary
-
Split line
-
Boundary (no area)
-
Boundary (1 area)
-
Boundary (2 areas)
-
Centroid (in area)
-
Centroid (outside area)
-
Centroid (duplicate in area)
-
Node (1 line)
-
Node (2 lines)
-
Next not used
-
Manual entry
-
No category
-
Info
- Informaţii
+
The table was created
-
Tool not yet implemented.
-
Cannot check orphan record: %1
-
Orphan record was left in attribute table. <br>Delete the record?
-
Cannot delete orphan record:
-
Cannot describe table for field %1
-
Left: %1
-
-- Middle: %1
-
-- Right: %1
-
@@ -27332,17 +27064,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select line segment
-
New vertex position
-
Release
-
@@ -27350,7 +27082,7 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
@@ -27358,59 +27090,59 @@ Press cancel to abort breaks calculation or OK to continue.
GRASS Edit
-
Category
-
Mode
- Mod
+
Layer
- Strat
+
Settings
- Setări
+
Snapping in screen pixels
-
Symbology
-
Line width
- Grosimea liniei
+
Marker size
-
Disp
-
Color
- Culoare
+
Index
-
Table
-
Column
- Coloană
+
Length
- Lungime
+
Add Column
-
Create / Alter Table
-
@@ -27456,17 +27188,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
Delete selected / select next
-
Release selected
-
@@ -27477,17 +27209,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select vertex
-
Delete vertex
- Șterge vertex
+
Release vertex
-
@@ -27498,17 +27230,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
-
New location
-
Release selected
-
@@ -27518,12 +27250,12 @@ Press cancel to abort breaks calculation or OK to continue.
Select vertex
-
Select new position
-
@@ -27535,18 +27267,18 @@ Press cancel to abort breaks calculation or OK to continue.
New vertex
-
Undo last vertex
-
Close line
-
@@ -27554,12 +27286,12 @@ Press cancel to abort breaks calculation or OK to continue.
New centroid
- Centroid nou
+
New point
-
@@ -27568,23 +27300,23 @@ Press cancel to abort breaks calculation or OK to continue.
Select position on line
-
Split the line
-
Release the line
-
Select point on line
-
@@ -27592,32 +27324,32 @@ Press cancel to abort breaks calculation or OK to continue.
Cancel
-
Ok
-
<font color='red'>Enter a name!</font>
-
<font color='red'>This is name of the source!</font>
-
<font color='red'>Exists!</font>
-
Overwrite
-
@@ -27625,300 +27357,300 @@ Press cancel to abort breaks calculation or OK to continue.
Mapcalc tools
-
Add map
-
Add constant value
-
Add operator or function
-
Add connection
-
Select item
-
Delete selected item
-
Open
-
Save
- Salvare
+
Save as
- Salvare ca
+
Addition
-
Subtraction
-
Multiplication
-
Division
-
Modulus
-
Exponentiation
-
Equal
-
Not equal
-
Greater than
-
Greater than or equal
-
Less than
-
Less than or equal
-
And
-
Or
-
Absolute value of x
-
Inverse tangent of x (result is in degrees)
-
Inverse tangent of y/x (result is in degrees)
-
Current column of moving window (starts with 1)
-
Cosine of x (x is in degrees)
-
Convert x to double-precision floating point
-
Current east-west resolution
-
Exponential function of x
-
x to the power y
-
Convert x to single-precision floating point
-
Decision: 1 if x not zero, 0 otherwise
-
Decision: a if x not zero, 0 otherwise
-
Decision: a if x not zero, b otherwise
-
Decision: a if x > 0, b if x is zero, c if x < 0
-
Convert x to integer [ truncates ]
-
Check if x = NULL
-
Natural log of x
-
Log of x base b
-
Largest value
-
Median value
-
Smallest value
-
Mode value
-
1 if x is zero, 0 otherwise
-
Current north-south resolution
-
NULL value
-
Random value between a and b
-
Round x to nearest integer
-
Current row of moving window (Starts with 1)
-
Sine of x (x is in degrees)
sin(x)
-
Square root of x
sqrt(x)
-
Tangent of x (x is in degrees)
tan(x)
-
Current x-coordinate of moving window
-
Current y-coordinate of moving window
-
Output
- Rezultat
+
Warning
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot get region of map %1
-
No GRASS raster maps currently in QGIS
-
Cannot create 'mapcalc' directory in current mapset.
-
New mapcalc
-
Enter new mapcalc name:
-
Enter vector name
-
The file already exists. Overwrite?
-
Save mapcalc
-
File name empty
-
Cannot open mapcalc file
-
The mapcalc schema (%1) not found.
-
Cannot open mapcalc schema (%1)
-
Cannot read mapcalc schema (%1):
-
%1
at line %2 column %3
-
@@ -28038,7 +27770,7 @@ at line %2 column %3
Module: %1
-
Warning
-
The module file (%1) not found.
-
Cannot open module file (%1)
-
Cannot read module file (%1)
-
%1
at line %2 column %3
-
Module %1 not found
-
Cannot find man page %1
-
Please ensure you have the GRASS documentation installed.
-
Not available, description not found (%1)
-
Not available, cannot open description (%1)
-
Not available, incorrect description (%1)
-
Cannot get input region
-
Input %1 outside current region!
-
Use Input Region
-
Output %1 exists! Overwrite?
-
Cannot find module %1
-
Cannot start module: %1
-
<B>Successfully finished</B>
-
<B>Finished with error</B>
-
<B>Module crashed or killed</B>
-
@@ -28172,37 +27904,37 @@ at line %2 column %3
GRASS Module
-
Options
- Opţiuni
+
Output
- Rezultat
+
Manual
- Manual
+
TextLabel
-
Run
- Rulează
+
View output
-
Attribute field
- Alocaţi câmp
+
Warning
-
'layer' attribute in field tag with key= %1 is missing.
-
@@ -28233,17 +27965,17 @@ at line %2 column %3
File
- Fişier
+
%1: missing value
-
%1: directory does not exist
-
@@ -28251,44 +27983,44 @@ at line %2 column %3
OGR/PostGIS/GDAL Input
-
Warning
-
Cannot find layeroption %1
-
Cannot find whereoption %1
-
Password
-
Select a layer
- Selectaţi un strat
+
PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
-
%1: no input
-
@@ -28296,7 +28028,7 @@ at line %2 column %3
Input
- Intrare
+
Warning
-
Cannot find typeoption %1
-
Cannot find values for typeoption %1
-
Cannot find layeroption %1
-
GRASS element %1 not supported
-
Use region of this map
-
Select a layer
- Selectaţi un strat
+
%1 (band %2)
-
Cannot get provider
-
%1: no input
-
@@ -28365,33 +28097,33 @@ at line %2 column %3
Output file
-
GeoTIFF
- GeoTIFF
+
Warning
-
Cannot parse version_min %1
-
Cannot parse version_max %1
-
%1: missing value
-
@@ -28399,7 +28131,7 @@ at line %2 column %3
Selected categories
-
@@ -28423,117 +28155,117 @@ at line %2 column %3
Warning
-
Cannot find module %1
-
Cannot start module %1
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot read module description (%1):
-
%1
at line %2 column %3
-
Region
-
Input layers
-
Current map canvas
-
Cannot find key %1
-
<< Hide advanced options
-
Show advanced options >>
-
Item with key %1 not found
-
Item with id %1 not found
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
-
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
Cannot set region of map %1
-
@@ -28541,60 +28273,60 @@ at line %2 column %3
Database
-
Location 1
-
System mapset
-
User's mapset
-
Location 2
-
Enter path to GRASS database
-
The directory doesn't exist!
-
No writable locations, the database is not writable!
-
Enter location name!
-
The location exists!
-
Selected projection is not supported by GRASS!
-
Warning
-
Cannot create projection.
-
Cannot reproject previously set region, default region set.
-
North must be greater than south
-
East must be greater than west
-
Regions file (%1) not found.
-
Cannot open locations file (%1)
-
Cannot read locations file (%1):
-
%1
at line %2 column %3
-
Cannot create QgsCoordinateReferenceSystem
-
Cannot reproject selected region.
-
Cannot reproject region
-
Enter mapset name.
-
The mapset already exists
-
Database:
-
Mapset:
-
Create location
-
Cannot create new location: %1
-
Create mapset
-
Cannot create new mapset directory
-
Cannot open DEFAULT_WIND
-
Cannot open WIND
-
New mapset
-
New mapset successfully created, but cannot be opened: %1
-
New mapset successfully created and set as current working mapset.
-
@@ -28750,7 +28482,7 @@ at line %2 column %3
New Mapset
-
Example directory tree:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28836,7 +28568,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28868,14 +28600,14 @@ p, li { white-space: pre-wrap; }
Default GRASS Region
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28886,17 +28618,17 @@ p, li { white-space: pre-wrap; }
Set current QGIS extent
-
Set
-
Region Error
-
Mapset
-
New mapset:
-
Mapset Error
-
<p align="center">Existing mapsets</p>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
-
Create New Mapset
-
Mapset:
-
@@ -28974,7 +28706,7 @@ p, li { white-space: pre-wrap; }
GrassVector
-
GRASS layer
- Strat GRASS
+
Plugins
- Plugin-uri
+
Add GRASS raster layer
-
Open GRASS tools
-
Display Current Grass Region
-
Edit Current Grass Region
-
Edit Grass Vector layer
-
Open Mapset
-
New Mapset
-
Close Mapset
-
Add GRASS Vector Layer
-
Adds a GRASS vector layer to the map canvas
-
Adds a GRASS raster layer to the map canvas
-
Open GRASS Tools
-
Displays the current GRASS region as a rectangle on the map canvas
-
Edit the current GRASS region
-
Edit the currently selected GRASS vector layer.
-
Create New Grass Vector
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
New vector name
-
Cannot create new vector: %1
-
New vector created but cannot be opened by data provider.
-
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot open the mapset. %1
-
Cannot close mapset. %1
-
Cannot close current mapset. %1
-
Cannot open GRASS mapset. %1
-
@@ -29204,7 +28936,7 @@ p, li { white-space: pre-wrap; }
GRASS vector map %1 does not have topology. Build topology?
-
@@ -29212,22 +28944,22 @@ p, li { white-space: pre-wrap; }
cellhd file %1 does not exist
-
Groups not yet supported
-
Format not supported
-
Cannot read data
-
@@ -29242,17 +28974,17 @@ p, li { white-space: pre-wrap; }
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
-
Cannot read current region: %1
-
Cannot write region
-
@@ -29260,12 +28992,12 @@ p, li { white-space: pre-wrap; }
GRASS Region Settings
-
Extent
-
Select the extent by dragging on canvas
or change the following values
-
Cell width
-
Cell height
-
Select GRASS Vector Layer
-
Select GRASS Raster Layer
-
Select GRASS mapcalc schema
-
Select GRASS Mapset
-
Choose existing GISDBASE
-
Wrong GISDBASE, no locations available.
-
Wrong GISDBASE
-
No map
-
No layer
-
No layers available in this map
-
@@ -29397,32 +29129,32 @@ or change the following values
Add GRASS Layer
-
Gisdbase
-
Location
-
Mapset
-
Map name
-
Select or type map name (wildcards '*' and '?' accepted for rasters)
-
Cannot rename the lock file %1
-
@@ -29471,22 +29203,22 @@ or change the following values
GRASS Tools: %1/%2
-
GRASS Direct Tools
-
Modules Tree
- Arborele modulelor
+
Modules List
- Lista modulelor
+
Direct Modules Tree
-
Direct Modules List
-
Cannot start command shell (%1)
-
GRASS Shell is not compiled.
-
The config file (%1) not found.
-
Cannot open config file (%1).
-
Cannot read config file (%1):
-
%1
at line %2 column %3
-
@@ -29576,12 +29308,12 @@ at line %2 column %3
Direct Modules Tree
-
Direct Modules List
-
@@ -29589,61 +29321,60 @@ at line %2 column %3
Add feature
-
Start editing failed
-
Provider cannot be opened for editing
-
Stop editing
-
Do you want to save the changes to layer %1?
-
Error
- Eroare
+
Problems during roll back
-
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
- Erori: %1
-
+
Show more
- Mai multe
+
@@ -29656,7 +29387,7 @@ at line %2 column %3
Layer name
- Numele stratului
+
Provider
- Furnizor
+
Datasource
-
none
-
Select file to replace '%1'
-
Please select exactly one file.
-
Select new directory of selected files
-
All files (*)
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -29721,7 +29448,7 @@ at line %2 column %3
Handle bad layers
-
@@ -29729,12 +29456,12 @@ at line %2 column %3
Handle bad layers
-
%1 of %2 bad layers were not fixable.
-
@@ -29742,7 +29469,7 @@ at line %2 column %3
QGIS Help
-
@@ -29750,12 +29477,12 @@ at line %2 column %3
QGIS Help
-
about:blank
- about:blank
+
@@ -29763,12 +29490,12 @@ at line %2 column %3
HTML annotation
-
Delete
-
WMS Server responded unexpectedly with HTTP Status Code %1 (%2)
-
Received %1 of %2 bytes
-
Received %1 bytes (total unknown)
-
HTTP response completed, however there was an error: %1
-
HTTP transaction completed, however there was an error: %1
-
Not connected
- Neconectat
+
Looking up '%1'
-
Connecting to '%1'
-
Sending request '%1'
-
Receiving reply
-
Response is complete
-
Closing down connection
-
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
-
+
@@ -29860,7 +29583,7 @@ This may be a problem in your network connection or at the WMS server.
Distance coefficient P
-
@@ -29868,32 +29591,32 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Layer
- Strat
+
FID
-
Attribute
- Atribut
+
Value
- Valoare
+
Expand tree.
-
Clear Results
-
Help
- Ajutor
+
Select identify mode
-
Mode
- Mod
+
Select view mode for raster layers
-
View
- Vizualizare
+
Auto open form
-
Collapse tree.
-
New results will be expanded by default.
-
Copy selected feature to clipboard.
-
Print selected HTML response.
-
@@ -29967,43 +29690,43 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
-
Feature
- Trăsătură
+
Value
- Valoare
+
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
(Derived)
-
Edit feature form
-
View feature form
-
Table
-
Tree
- Arbore
+
Graph
-
feature id
-
Zoom to feature
-
Copy feature
-
Toggle feature selection
-
Copy attribute value
-
Copy feature attributes
-
Copy GetFeatureInfo request URL
-
Clear results
-
Clear highlights
-
Highlight all
-
Highlight layer
-
Activate layer
-
Layer properties...
-
Expand all
-
Collapse all
-
Attributes changed
-
Cannot print
-
Cannot print this item
-
@@ -30147,7 +29870,7 @@ This may be a problem in your network connection or at the WMS server.
Print
-
@@ -30155,7 +29878,7 @@ This may be a problem in your network connection or at the WMS server.
Loading...
-
@@ -30163,7 +29886,7 @@ This may be a problem in your network connection or at the WMS server.
Progress indication
-
@@ -30172,45 +29895,45 @@ This may be a problem in your network connection or at the WMS server.
Triangular interpolation (TIN)
-
Inverse Distance Weighting (IDW)
-
No input data for interpolation
-
Please add one or more input layers
-
Output file name invalid
-
Please enter a valid output file name
-
Break lines
-
Structure lines
-
Save interpolated raster as...
-
@@ -30228,47 +29951,47 @@ This may be a problem in your network connection or at the WMS server.
Interpolation plugin
-
Input
- Intrare
+
Vector layers
-
Interpolation attribute
-
Use z-Coordinate for interpolation
-
Add
- Adaugă
+
Remove
-
Vector layer
-
Attribute
- Atribut
+
Output
- Rezultat
+
Interpolation method
- Metodă interpolare
+
Number of columns
-
Number of rows
-
Cellsize X
-
Cellsize Y
-
Set to current extent
-
Output file
-
Add result to project
- Adăugare rezultat la proiect
+
@@ -30354,7 +30077,7 @@ This may be a problem in your network connection or at the WMS server.
&Interpolation
-
@@ -30363,7 +30086,7 @@ This may be a problem in your network connection or at the WMS server.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -30371,17 +30094,17 @@ This may be a problem in your network connection or at the WMS server.
Form
-
Sub renderer:
-
Merge polygons before rendering (slow)
-
@@ -30389,17 +30112,17 @@ This may be a problem in your network connection or at the WMS server.
Enter class bounds
-
Lower value
-
Upper value
-
@@ -30420,63 +30143,63 @@ This may be a problem in your network connection or at the WMS server.
Label Properties
-
Placement
- Pozitionare
+
Below Right
-
Right
- Dreapta
+
Below
-
Over
-
Above
-
Left
- Stânga
+
Below Left
-
Above Right
-
Above Left
-
Use scale dependent rendering
-
Buffer labels
-
Buffer size
-
In points
-
In map units
-
Color
- Culoare
+
Transparency
-
Offset
-
X offset
-
Y offset
-
Basic label options
-
Field containing label
-
Default label
-
Font size
-
Angle (deg)
-
Multiline labels?
-
Label only selected features
-
Data defined placement
-
Data defined properties
-
&Font family
-
&Underline
-
&Size
-
Size units
-
&Color
-
Strikeout
-
Data defined buffer
-
Transparency:
-
Size:
-
Data defined position
- Poziționare definită de date
+
X Coordinate
- Coordonata X
+
Y Coordinate
- Coordonata Y
+
X Offset (pts)
-
Y Offset (pts)
-
Preview:
-
QGIS Rocks!
-
@@ -30700,17 +30423,17 @@ This may be a problem in your network connection or at the WMS server.
Expression result
-
Font color
-
Buffer color
-
@@ -30718,7 +30441,7 @@ This may be a problem in your network connection or at the WMS server.
Label properties
-
Available typeface styles
-
Size
-
Style
- Stil
+
Underlined text
-
U
- U
+
Strikeout text
-
S
- S
+
Bold text
(data defined only, overrides Style)
-
B
- B
+
Italic text
(data defined only, overrides Style)
-
I
- I
+
Display
-
Scale-based
-
Show label
-
Ignores priority and permits collisions/overlaps
-
Always show (exceptions above)
-
Buffer
- Tampon
+
Label distance
-
X Coordinate
- Coordonata X
+
Y Coordinate
- Coordonata Y
+
Horizontal alignment
-
Vertical alignment
-
points
-
map units
-
mm
- mm
+
% of length
-
%1 not found. Default substituted.
-
Chosen font
-
string
-
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
-
int [0-2000]
-
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
-
int [1-10000]
-
Text/Buffer sample
-
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
No change
-
All uppercase
-
All lowercase
-
Capitalize first letter
-
Size%1
-
X
-
File not found
-
@@ -31036,12 +30759,12 @@ This may be a problem in your network connection or at the WMS server.
Layer labeling settings
-
- Label this layer with
-
...
...
@@ -31147,63 +30870,63 @@ This may be a problem in your network connection or at the WMS server.
Sample text
-
Reset sample text
-
Size for sample text in map units
-
Sample background color
-
Line direction symbol
-
Formatted numbers
-
Decimal places
-
Show plus sign
-
Multiple lines
-
- Automated placement settings (apply to all layers)
-
Text/Buffer Sample
-
Text
- Text
+
Shadow
-
Rendering
- Randare
+
letter
-
Spacing
-
Blend mode
-
word
-
Underlined text
-
Bold text
(data defined only, overrides Style)
-
B
- B
+
Italic text
(data defined only, overrides Style)
-
I
- I
+
Font is missing.
-
Text formatting
-
Wrap on character
-
Line height
-
Line height spacing for multi-line text
-
Alignment
Aliniere
Paragraph style alignment of multi-line text
-
Left
- Stânga
+
Center
- Centru
+
Right
- Dreapta
+
Force point inside polygon
-
Repeat
-
- Discourage labels from covering features
-
Text style
-
Available typeface styles
-
Strikeout text
-
Capitalization style of text
-
Space in pixels or map units, relative to size unit choice
-
Type case
-
Color
- Culoare
+
Size
-
Buffer
- Tampon
+
- Labels will not show if larger than this on screen
-
- px
px
- Data defined
-
- X
- X
+
- Y
- Y
+
- Coordinate
-
- Preserve data rotation values
-
- horizontal
-
- vertical
-
- Label options
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
-
- Maximum
Maximum
- Pixel size-based visibility (labels in map units)
-
- Labels will not show if smaller than this on screen
-
- Minimum
Minimum
@@ -31523,9 +31246,9 @@ This may be a problem in your network connection or at the WMS server.
<
- Scale-based visibility
-
Placement
- Pozitionare
+
left/right
-
above
-
below
-
Reverse direction
- Direcţie inversă
+
- Priority
-
- Low
- Scăzut
+
- High
- Ridicat
+
Around point
-
Offset from point
-
Parallel
-
Curved
-
Text buffer
-
Draw text buffer
-
Color buffer's fill
-
Draw background
-
Size X
-
Size type
-
Size Y
-
Fill color
-
Border color
-
Draw drop shadow
-
Blur radius
-
Blur only alpha pixels
-
Label's rotation is ignored
-
Use global shadow
-
˚
-
Lowest label component
-
Draw under
-
Horizontal
-
Offset from centroid
-
Around centroid
-
Horizontal (slow)
-
Free (slow)
-
Using perimeter
-
visible polygon
-
whole polygon
-
Rotation
-
Above line
- Deasupra liniei
+
On line
- Pe linie
+
Below line
-
Line orientation dependent position
-
Centroid
-
abc
-
Quadrant
-
Distance
- Distanţă
+
- outside
-
- inside
-
- Maximum angle between curved characters
-
Pen join style
-
Drop shadow
-
Offset
-
Scale
- Scară
+
Background
- Fundal
+
Load symbol parameters
-
Fixed
-
Offset X,Y
-
Rectangle
- Dreptunghi
+
Square
-
Ellipse
- Elipsă
+
Circle
-
SVG
- SVG
+
Shape
-
Sync with label
-
Offset of label
-
Radius X,Y
-
Border width
-
symbol units
-
- Merge connected lines to avoid duplicate labels
-
- Label every part of multi-part features
-
- Feature options
-
- Suppress labeling of features smaller than
-
- mm
mm
- Show all labels for this layer (including colliding labels)
-
- Show upside-down labels
-
- never
niciodată
- when rotation defined
-
- always
întotdeauna
- Limit number of features to be labeled to
-
- Number of features sent to labeling engine, though not all may be labeled
-
Poziție
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
-
- Show label
-
@@ -31977,21 +31700,21 @@ This may be a problem in your network connection or at the WMS server.
Outline: %1
-
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -31999,60 +31722,60 @@ not displayed
&Add Group
-
&Remove
- &Elimină
+
&Show in overview
-
Re&name
-
Show Feature Count
-
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
-
QgsLegendModel
- Group
Grup
- No Legend Available
-
@@ -32061,33 +31784,33 @@ not displayed
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Angle
-
Distance
- Distanţă
+
Line width
- Grosimea liniei
+
Color
- Culoare
+
@@ -32095,23 +31818,23 @@ not displayed
Styles related to the layer
-
Other styles on the database
-
Cancel
-
Load Style
- Încărcare stil
+
@@ -32119,12 +31842,12 @@ not displayed
Select all
-
Clear selection
- Ştergere selecţie
+
You should select at least one connection from list.
-
Save connections
-
Saving connections
-
Cannot write file %1:
%2.
-
Loading connections
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an WMS connections exchange file.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an PostGIS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Connection with name '%1' already exists. Overwrite?
-
@@ -32269,26 +31992,26 @@ not displayed
Select connections to export
-
QgsMapCanvas
- canvas
-
- Rendering
Randare
- Canvas refresh: %1 ms
-
@@ -32296,7 +32019,7 @@ not displayed
From map canvas
-
@@ -32304,27 +32027,27 @@ not displayed
Enter map coordinates
-
Enter X and Y coordinates (DMS (dd mm ss.ss), DD (dd.dd) or projected coordinates (mmmm.mm)) which correspond with the selected point on the image. Alternatively, click the button with icon of a pencil and then click a corresponding point on map canvas of QGIS to fill in coordinates of that point.
-
X / East:
-
Y / North:
-
Snap to background layers
-
@@ -32333,39 +32056,39 @@ not displayed
Specify CRS for layer %1
-
%1 at line %2 column %3
- %1 la linia %2 coloana %3
+
Error: qgis element could not be found in %1
-
Loading style file %1 failed because:
%2
-
Could not save symbology because:
%1
-
The directory containing your dataset needs to be writable!
-
Created default style file as %1
-
ERROR: Failed to created default style file as %1. Check file permissions and retry.
-
User database could not be opened.
-
The style table could not be created.
-
The style %1 was saved to database
-
The style %1 was updated in the database.
-
The style %1 could not be updated in the database.
-
The style %1 could not be inserted into database.
-
ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
Unable to open file %1
-
@@ -32430,13 +32153,13 @@ not displayed
Transform error caught: %1
-
CRS
-
@@ -32444,51 +32167,51 @@ not displayed
add feature
-
Layer cannot be added to
-
The data provider for this layer does not support the addition of features.
-
Wrong editing tool
-
Cannot apply the 'capture point' tool on this vector layer
-
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Cannot apply the 'capture line' tool on this vector layer
-
Cannot apply the 'capture polygon' tool on this vector layer
-
Cannot add feature. Unknown WKB type
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
@@ -32532,53 +32255,53 @@ not displayed
No feature selected. Please select a feature with the selection tool or in the attribute table
-
Several features are selected. Please select only one feature to which an part should be added.
-
Part added
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected feature is not multi part.
-
New part's geometry is not valid.
-
New polygon ring not disjoint with existing polygons.
-
Several features are selected. Please select only one feature to which an island should be added.
-
Selected geometry could not be found
-
@@ -32586,52 +32309,52 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32639,12 +32362,12 @@ not displayed
Validation started.
- Validarea a început.
+
Validation finished.
-
@@ -32652,7 +32375,7 @@ not displayed
Changed properties for label
-
@@ -32660,12 +32383,12 @@ not displayed
Part of multipart feature deleted
-
Couldn't remove the selected part.
-
@@ -32673,18 +32396,18 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
Ring deleted
-
@@ -32692,12 +32415,12 @@ not displayed
No active vector layer
- Nici un strat vectorial nu este activ
+
Layer not editable
-
@@ -32705,27 +32428,27 @@ not displayed
No active vector layer
- Nici un strat vectorial nu este activ
+
To run an action, you must choose a vector layer by clicking on its name in the legend
-
No actions available
-
The active vector layer has no defined actions
-
No features at this position found.
-
@@ -32733,52 +32456,52 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added and filled
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32786,38 +32509,38 @@ not displayed
All (%1)
-
No active layer. To identify features, you must choose an active layer.
-
Identifying on %1...
-
Identifying done.
-
(clicked coordinate)
-
feature id
-
new feature
-
no data
-
Identify error
-
@@ -32878,7 +32601,7 @@ not displayed
No features at this position found.
-
@@ -32886,7 +32609,7 @@ not displayed
Feature moved
-
@@ -32894,7 +32617,7 @@ not displayed
Moved label
-
@@ -32902,12 +32625,12 @@ not displayed
could not snap to a segment on the current layer.
-
Inserted vertex
-
@@ -32915,22 +32638,22 @@ not displayed
Offset curve
-
Offset:
-
Geometry error
-
Creating offset geometry failed
-
@@ -32938,12 +32661,12 @@ not displayed
Pinned label
-
Unpinned label
-
@@ -32951,17 +32674,17 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Reshape
-
@@ -32969,7 +32692,7 @@ not displayed
Features Rotated
-
@@ -32977,7 +32700,7 @@ not displayed
Rotated label
-
@@ -32985,27 +32708,27 @@ not displayed
No point feature
-
No point feature was detected at the clicked position. Please click closer to the feature or enhance the search tolerance under Settings->Options->Digitizing->Serch radius for vertex edits
-
No rotation Attributes
-
The active point layer does not have a rotation attribute
-
Rotate symbol
-
@@ -33013,12 +32736,12 @@ not displayed
Hid labels
-
Showed labels
-
@@ -33026,23 +32749,23 @@ not displayed
Geometry simplified
-
Unsupported operation
-
Multipart features are not supported for simplification.
-
This feature cannot be simplified. Check if feature has enough vertices to be simplified.
-
@@ -33050,17 +32773,17 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Features split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
No feature split done
-
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
@@ -33100,17 +32823,17 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Parts split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Split error
-
@@ -33154,22 +32877,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
@@ -33179,39 +32902,39 @@ not displayed
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Interval
- Interval
+
Line offset
- Compensare linie
+
Placement
- Pozitionare
+
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -33237,67 +32960,67 @@ not displayed
&New
- &Nou
+
The calculations are based on:
-
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
@@ -33305,12 +33028,12 @@ not displayed
Incorrect measure results
-
<p>This map is defined with a geographic coordinate system (latitude/longitude) but the map extents suggests that it is actually a projected coordinate system (e.g., Mercator). If so, the results from line or area measurements will be incorrect.</p><p>To fix this, explicitly set an appropriate map coordinate system using the <tt>Settings:Project Properties</tt> menu.
-
@@ -33318,58 +33041,58 @@ not displayed
Whole number (integer)
- Număr întreg
+
Decimal number (real)
-
Text (string)
-
Date
- Dată
+
Whole number (smallint - 16bit)
- Număr întreg (smallint - 16 biţi)
+
Whole number (integer - 32bit)
- Număr întreg (intreg - 32 biţi)
+
Whole number (integer - 64bit)
- Număr întreg (întreg - 64 biţi)
+
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (double)
-
Text, unlimited length (text)
- Text, lungime nelimitată (text)
+
@@ -33377,7 +33100,7 @@ not displayed
Skip attribute
-
Merge
-
Feature %1
-
Median
- Media
+
Sum
- Sumă
+
Concatenation
-
Mean
- Media
+
Skipped
-
@@ -33435,17 +33158,17 @@ not displayed
Merge feature attributes
-
Take attributes from selected feature
-
Remove feature from selection
-
@@ -33453,27 +33176,23 @@ not displayed
Remaining messages
-
Close all
-
Close
-
%n more
unread messages
-
-
+
@@ -33481,38 +33200,38 @@ not displayed
QGIS Log
-
No messages.
-
%1 message(s) logged.
-
General
- General
+
Timestamp
-
Message
-
Level
-
@@ -33533,28 +33252,28 @@ not displayed
Show non-spatial tables
-
Edit...
- Editare...
+
Delete
-
%1: Not a vector layer!
- %1: Nu este un strat vectorial!
+
%1: OK!
- %1: OK!
+
Saving passwords
- Salvare parole
+
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
- Salvare conexiune
+
Should the existing connection %1 be overwritten?
- Doriţi suprascrierea conexiunii existente %1?
+
Test connection
- Test conexiune
+
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
-
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
-
Connection to %1 was successful
-
@@ -33633,12 +33352,12 @@ not displayed
Create a New MSSQL connection
-
Connection Information
-
Host
-
Name of the new connection
-
Trusted Connection
-
&Test Connect
-
Save Password
- Salvare parolă
+
Only look in the geometry_columns metadata table
-
Also list tables with no geometry
- De asemenea, afișează lista tabelelor fără geometrie
+
Use estimated table parameters
-
@@ -33716,22 +33435,22 @@ not displayed
8 Bytes integer
-
4 Bytes integer
-
2 Bytes integer
-
1 Bytes integer
-
Text, fixed length (char)
- Text, lungime fixă (reduce)
+
Text, limited variable length (varchar)
- Text, lungime variabilă limitată
+
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length (text)
- Text, lungime nelimitată (text)
+
Text, unlimited length unicode (ntext)
-
@@ -33789,7 +33508,7 @@ not displayed
New Connection...
- Conexiune nouă...
+
@@ -33797,12 +33516,12 @@ not displayed
%1 as %2 in %3
-
as geometryless table
-
@@ -33810,7 +33529,7 @@ not displayed
Add MSSQL Table(s)
-
&Set Filter
- &Setare Filtru
+
Set Filter
- Setare Filtru
+
Wildcard
- Element substituent
+
RegExp
- RegExp
+
All
- Tot
+
Schema
- Schemă
+
Table
-
Geometry column
- Coloană geometrie
+
Primary key column
-
Confirm Delete
-
Load connections
- Încarcare conexiuni
+
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
- Trebuie să selectaţi un tabel pentru a putea adăuga un strat.
+
MSSQL Provider
-
Connect
- Conectare
+
@@ -33939,7 +33658,7 @@ not displayed
Select...
-
@@ -33947,12 +33666,12 @@ not displayed
Schema
- Schemă
+
Table
-
Geometry column
- Coloană geometrie
+
Primary key column
-
Select at id
-
Detecting...
-
Select...
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
No Geometry
- Nici o geometrie
+
Unknown Geometry
- Geometrie necunoscută
+
@@ -34055,27 +33774,27 @@ not displayed
Not set
-
No enhancement
- Nici o îmbunătăţire
+
Stretch to MinMax
- Extindere la MinMax
+
Stretch and clip to MinMax
- Întindere şi tăiere la MinMax
+
Clip to MinMax
- Tăiere la MinMax
+
Contrast
enhancement
-
Min/max
-
Red band
-
Green band
-
Blue band
-
@@ -34134,12 +33853,12 @@ enhancement
Network request %1 timed out
-
Network
-
@@ -34147,7 +33866,7 @@ enhancement
Cannot find boundary in multipart content type
-
@@ -34155,63 +33874,63 @@ enhancement
Create a new %1 connection
-
all
-
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
Save connection
- Salvare conexiune
+
Should the existing connection %1 be overwritten?
- Doriţi suprascrierea conexiunii existente %1?
+
Saving passwords
- Salvare parole
+
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
@@ -34219,17 +33938,17 @@ Note: giving the password is optional. It will be requested interactivly, when n
Create a new WMS connection
-
Connection details
- Detalii conexiune
+
DPI-Mode
-
If the service requires basic authentication, enter a user name and optional password
-
&User name
-
Name of the new connection
-
HTTP address of the Web Map Server
-
Ignore GetFeatureInfo URI reported in capabilities
-
Ignore GetMap/GetTile URI reported in capabilities
-
Ignore axis orientation (WMS 1.3/WMTS)
-
Invert axis orientation
-
Smooth pixmap transform
-
Referer
-
@@ -34303,7 +34022,7 @@ Note: giving the password is optional. It will be requested interactivly, when n
Test connection
- Test conexiune
+
Connection to %1 was successful
-
Save connection
- Salvare conexiune
+
Should the existing connection %1 be overwritten?
- Doriţi suprascrierea conexiunii existente %1?
+
@@ -34334,12 +34053,12 @@ Extended error information:
Create a New OGR Database connection
-
Connection Information
-
Name of the new connection
-
Host
-
Database
-
Username
-
Password
-
Save Password
- Salvare parolă
+
&Test Connect
-
@@ -34397,27 +34116,27 @@ Extended error information:
Text data
-
Whole number
-
Decimal number
-
New SpatiaLite Database File
- Nou fişier baza de date SpatiaLite
+
SpatiaLite
- SpatiaLite
+
SpatiaLite Database
-
Unable to open the database
-
Error
- Eroare
+
Failed to load SRIDS: %1
-
Registered new database!
-
Unable to open the database: %1
-
Error Creating SpatiaLite Table
-
Failed to create the SpatiaLite table %1. The database returned:
%2
-
Error Creating Geometry Column
-
Failed to create the geometry column. The database returned:
%1
-
Error Creating Spatial Index
-
Failed to create the spatial index. The database returned:
%1
-
Invalid Layer
- Strat nevalid
+
%1 is an invalid layer and cannot be loaded.
- %1 este un strat nevalid si nu poate fi accesat.
+
@@ -34506,17 +34225,17 @@ Extended error information:
New Spatialite Layer
-
Database
-
Create a new Spatialite database
-
Layer name
- Numele stratului
+
Name for the new layer
-
Geometry column
- Coloană geometrie
+
geometry
-
Polygon
- Poligon
+
Multiline
- Multilinie
+
Spatial Reference Id
-
Add an integer id field as the primary key for the new layer
-
Create an autoincrementing primary key
-
An attribute name
-
Add attribute to list
-
Add to attributes list
-
Attributes list
-
Delete selected attribute
-
Remove attribute
-
@@ -34654,43 +34373,43 @@ Extended error information:
Text data
-
Whole number
-
Decimal number
-
Date
- Dată
+
ESRI Shapefile
-
Comma Separated Value
-
GML
-
Mapinfo File
-
New Vector Layer
-
File format
-
Add attribute to list
-
Add to attributes list
-
Attributes list
-
Delete selected attribute
-
Remove attribute
-
Specify the coordinate reference system of the layer's geometry.
- Specificaţi sistemul de coordonate de referinţă al geometriei stratului.
+
Specify CRS
- Specificaţi CRS
+
No query has been specified.
-
There is already a pending request for data.
-
Cannot open output file: %1
-
@@ -34820,32 +34539,32 @@ Extended error information:
Download OpenStreetMap data
-
Extent
-
From map canvas
-
From layer
-
Manual
- Manual
+
Output file
-
OpenStreetMap files (*.osm)
-
Download error
-
OpenStreetMap download
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -34903,12 +34622,12 @@ Extended error information:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Polygons (closed ways)
-
Output layer name
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
- &Încărcaţi pe planşă atunci când este finalizat
+
Tag
-
Count
-
SQLite databases (*.db)
-
Unable to open database:
%1
-
OpenStreetMap export
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -35004,7 +34723,7 @@ Extended error information:
Input XML file (.osm)
-
Output SpatiaLite DB file
-
Connection name
-
OpenStreetMap files (*.osm)
-
SQLite databases (*.db)
-
Output database file exists already. Overwrite?
-
WMS Password for %1
- Parolă WMS pentru %1
+
Edit...
- Editare...
+
Delete
-
@@ -35106,32 +34825,32 @@ Extended error information:
&Add
-
Add selected layers to map
-
Always cache
-
Prefer cache
-
Prefer network
-
Always network
-
Confirm Delete
-
Load connections
- Încarcare conexiuni
+
XML files (*.xml *XML)
-
Coordinate Reference System (%n available)
crs count
-
-
+
Coordinate Reference System
-
Could not understand the response:
%1
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
@@ -35200,68 +34915,68 @@ Extended error information:
Add Layer(s) from a Server
-
Ready
- Gata
+
Layers
- Straturi
+
C&onnect
-
&New
- &Nou
+
Edit
- Editare
+
Delete
-
Load connections from file
-
Load
-
Save connections to file
-
Save
- Salvare
+
Adds a few example WMS servers
- Adaugă câteva servere WMS exemplu
+
Add default servers
- Adaugă servere predefinite
+
Abstract
- Rezumat
+
Time
- Timp
+
Coordinate Reference System:
-
Selected Coordinate Reference System
-
Change ...
- Schimba ...
+
Options
- Opţiuni
+
Layer name
- Numele stratului
+
Tile size
- Mărime piesă
+
Feature limit for GetFeatureInfo
- Limită trasături pentru GetFeatureInfo
+
Cache
-
Layer Order
- Ordine strat
+
Move selected layer UP
- Mutare strat selectat în sus
+
Up
- Sus
+
Move selected layer DOWN
- Mutare strat selectat în jos
+
Down
- Jos
+
Layer
- Strat
+
Style
- Stil
+
Tilesets
- Seturi piese
+
Styles
-
Size
-
CRS
-
Server Search
- Căutare server
+
Description
- Descriere
+
URL
-
Add selected row to WMS list
- Adăugare rând selectat la lista WMS
+
@@ -35435,44 +35150,44 @@ Always network: always load from network and do not check if the cache has a val
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints
-
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Offline Editing Plugin
-
Could not open the spatialite logging database
-
@@ -35480,12 +35195,12 @@ Always network: always load from network and do not check if the cache has a val
Convert to offline project
-
Create offline copies of selected layers and save as offline project
-
&Offline Editing
-
Synchronize
-
Synchronize offline project with remote layers
-
Converting to offline project
-
Synchronizing to remote layers
-
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -35556,32 +35271,32 @@ Always network: always load from network and do not check if the cache has a val
Select target database for offline data
-
SpatiaLite DB
- Spatialite DB
+
All files
-
Offline Editing Plugin
-
Converting to offline project.
-
Offline database file '%1' exists. Overwrite?
-
@@ -35589,12 +35304,12 @@ Always network: always load from network and do not check if the cache has a val
Create offline project
-
Offline data
-
Select remote layers
-
Show only editable layers
-
@@ -35617,7 +35332,7 @@ Always network: always load from network and do not check if the cache has a val
Layer %1 of %2..
-
@@ -35625,12 +35340,12 @@ Always network: always load from network and do not check if the cache has a val
Dialog
- Dialog
+
TextLabel
-
@@ -35638,7 +35353,7 @@ Always network: always load from network and do not check if the cache has a val
Couldn't open file %1.prj
-
Couldn't open file %1.qpj
-
@@ -35657,7 +35372,7 @@ Always network: always load from network and do not check if the cache has a val
Data source is invalid, no layer found (%1)
-
Data source is invalid (%1)
-
Whole number (integer)
- Număr întreg
+
Decimal number (real)
-
Text (string)
-
OGR[%1] error %2: %3
-
Unknown
- Necunoscut
+
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
type %1 for field %2 not found
-
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
Feature %1 for attribute update not found.
-
Field %1 of feature %2 doesn't exist.
-
Type %1 of attribute %2 of feature %3 unknown.
-
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
Shapefiles without attribute are considered read-only.
-
@@ -35832,12 +35547,12 @@ Always network: always load from network and do not check if the cache has a val
Open raster
-
Raster file:
-
Save raster as:
-
Choose a name of the raster
-
Error
- Eroare
+
The selected file is not a valid raster file.
-
Choose a name for the modified raster
-
-modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -35884,12 +35599,12 @@ Always network: always load from network and do not check if the cache has a val
Open an OGR Supported Vector Layer
-
Open Directory
-
Confirm Delete
-
Add vector layer
-
No database selected.
-
Password for
-
Please enter your password:
-
No protocol URI entered.
-
No layers selected.
-
No directory selected.
-
@@ -35945,39 +35660,39 @@ Always network: always load from network and do not check if the cache has a val
Add vector layer
-
Source type
-
File
- Fişier
+
Directory
-
Database
-
Protocol
-
Encoding
- Codificare
+
URI
-
Dataset
-
Connections
- Conexiuni
+
New
-
Edit
- Editare
+
Delete
-
@@ -36032,12 +35747,12 @@ Always network: always load from network and do not check if the cache has a val
Options Dialog Template
-
GroupBox
-
@@ -36045,27 +35760,27 @@ Always network: always load from network and do not check if the cache has a val
Identify highlight color
-
not present
-
System value: %1
-
Show all features
-
Show selected features
-
Load all
-
Check file contents
-
Check extension
-
Basic scan
-
Full scan
-
Cumulative pixel count cut
-
Minimum / maximum
-
Mean +/- standard deviation
-
Solid
Solid
Dots
Puncte
Crosses
Cruciulițe
- Detected active locale on your system: %1
-
- To vertex
-
- To segment
-
- To vertex and segment
-
- map units
-
- pixels
- pixeli
+
- Semi transparent circle
-
- Cross
-
- None
-
- QGIS files
Fișiere QGIS
- Off
-
- QGIS
QGIS
- GEOS
GEOS
- Round
-
- Mitre
-
- Bevel
-
- Save default project
-
- You must set a default project
-
- Current project saved as default
-
- Error saving current project as default
-
- Choose a directory to store project template files
-
Selection color
-
Afișare entități vizibile pe hartă
- Choose project file to open at launch
-
- Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
Revenire la UI implicită
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
-
- If Undefined
-
- Unset
-
- Prepend
-
- Append
-
- Choose a directory
-
- Enter scale
- Introducere scară
+
- Scale denominator
- Denominator scară
+
- Load scales
- Încărcare scări
+
- XML files (*.xml *.XML)
-
- Save scales
- Salvare scări
+
- No Stretch
-
- Stretch To MinMax
-
- Stretch And Clip To MinMax
-
- Clip To MinMax
-
None / Planimetric
-
@@ -36391,12 +36106,12 @@ Always network: always load from network and do not check if the cache has a val
Options
- Opţiuni
+
General
General
@@ -36409,44 +36124,44 @@ Always network: always load from network and do not check if the cache has a val
Data Sources
-
Data sources
-
Rendering
- Randare
+
Canvas & Legend
-
Canvas and legend
-
Map Tools
-
Map tools
-
Digitizing
- Digitizare
+
Locale
-
Network
-
Application
-
Style <i>(QGIS restart required)</i>
-
Icon theme
-
Hide splash screen at startup
-
Show tips at start up
-
Bold group box titles
-
QGIS-styled group boxes
-
Project files
-
Most recent
-
...
...
Open project on launch
-
Create new project from default project
-
Set current project as default
-
Reset default
-
Template folder
-
Prompt to save project and data source changes when required
-
Prompt for confirmation when a layer is to be removed
-
Warn when opening a project file saved with an older version of QGIS
-
Ask
-
Reset the User Interface settings, to reset QGIS to it's default view
-
Remove
Elimină
@@ -36703,194 +36418,194 @@ Always network: always load from network and do not check if the cache has a val
Add
Adaugă
Current environment variables (read-only - bold indicates modified at startup)
-
Show only QGIS-specific variables
-
Use custom variables (restart required - include separators)
-
Plugin paths
-
Path(s) to search for additional C++ plugins libraries
-
SVG paths
-
Path(s) to search for Scalable Vector Graphic (SVG) symbols
-
Feature attributes and table
-
Open attribute table in a dock window (QGIS restart required)
-
Copy geometry in WKT representation from attribute table
-
Attribute table behaviour
-
Attribute table row cache
-
Representation for NULL values
-
Data source handling
-
Scan for valid items in the browser dock
-
Scan for contents of compressed files (.zip) in browser dock
-
Prompt for raster sublayers when opening
-
Add PostGIS layers with double click and select in extended mode
-
Rendering behavior
-
By default new la&yers added to the map should be displayed
-
Use render caching where possible to speed up redraws
-
Render layers in parallel using many CPU cores
-
Max cores to use:
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Rendering quality
-
Make lines appear less jagged at the expense of some drawing performance
-
Rasters
-
RGB band selection
-
Red band
-
Green band
-
Blue band
-
Contrast enhancement
-
Single band gray
-
Multi band color (byte / band)
-
Multi band color (> byte / band)
-
Limits (minimum/maximum)
-
Cumulative pixel count cut limits
-
Standard deviation multiplier
-
Debugging
-
Show these events in the Log Message panel (under Rendering tab)
-
Map canvas refresh
-
Default map appearance (overridden by project properties)
-
Selection color
-
Highlight color
-
<html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
Buffer
- Tampon
+
Lines / outlines buffer in millimeters.
-
Minimum width
-
Minimum line / outline width in millimeters.
-
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
-
Background color
-
Use live-updating color chooser dialogs
-
Ignore shapefile encoding declaration
-
Disable OGR on-the-fly conversion from declared encoding to UTF-8
-
Custom side bar style
-
Add Oracle layers with double click and select in extended mode
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
Simplify on provider side if possible
-
Layer legend
-
Double click action in legend
-
Open layer properties
-
Open attribute table
-
Capitalise layer names
-
Bold layer names
-
Display classification attribute names
-
Bold group names
-
Create raster icons (may be slow)
-
Legend item styles
-
WMS getLegendGraphic Resolution
-
<b>Note:</b> Specify the search radius as a percentage of the map width
-
Search radius for identifying features and displaying map tips
-
Measure tool
- Instrument de măsură
+
Rubberband color
-
Preferred measurements units
-
Nautical Miles
-
Preferred angle units
-
Degrees
- Grade
+
Map update interval
-
Enable feature simplification by default for newly added layers
-
Radians
- radiani
+
Decimal places
-
Keep base unit
-
Gon
-
Panning and zooming
-
Zoom factor
-
Mouse wheel action
-
Zoom
-
Zoom and recenter
-
Zoom to mouse cursor
-
Nothing
-
Predefined scales
-
Add predefined scale
-
Remove selected
-
Insert default scales
-
Import from file
- Importare din fişier
+
Export to file
- Exportare în fișier
+
Composition defaults
-
Default font
-
Grid style
-
Color...
Culoare...
+
+ Grid defaults
+
+
+ Spacing
+
mm
mm
Grid offset
-
Snap tolerance
-
- Guide defaults
+
+
+ Feature creation
-
- Validate geometries
-
- Reuse last entered attribute values
-
- Rubberband
-
- Line color
-
- Line width in pixels
-
- Line width
- Grosimea liniei
+
- Snapping
-
- Default snap mode
-
- Default snapping tolerance
-
- Search radius for vertex edits
-
- map units
-
pixels
- pixeli
+
- Open snapping options in a dock window (QGIS restart required)
-
- Vertex markers
-
- Marker style
-
- Marker size
-
- Show markers only for selected features
-
-
- Curve offset tool
-
-
- Miter limit
-
-
- Join style
- Stil îmbinare
+
Curve offset tool
+
+
+ Miter limit
+
+
+ Join style
+
+
+ Quadrant segments
-
- GDAL driver options
-
- Edit Pyramids Options
-
-
- Edit Create Options
-
-
- GDAL drivers
-
-
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
-
Name
- Nume
+ Edit Create Options
+
- GDAL drivers
+
+
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+
+
+ Name
+
+
+ ext
ext
- Flags
-
- Description
- Descriere
+
- CRS for new layers
-
- Select...
-
- Use &project CRS
-
- Prompt for &CRS
-
- Use default CRS displa&yed below
-
- When a new layer is created, or when a layer is loaded that has no CRS
-
- Default CRS for new projects
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
-
- Always start new projects with this CRS
-
- Enable 'on the &fly' reprojection by default
-
- Don't enable 'on the fly' reprojection
-
- Default datum transformations
-
- Source CRS
-
- Destination CRS
-
- Source datum transform
-
- Destination datum transform
-
- Ask for datum transformation when no default is defined
-
- Override system locale
-
- Locale to use instead
-
- <b>Note:</b> Enabling / changing overide on local requires an application restart
-
- Additional Info
-
- Detected active locale on your system:
-
- WMS search address
-
- Timeout for network requests (ms)
-
- Default expiration period for WMS-C/WMTS tiles (hours)
-
- Max retry in case of tile request errors
-
- User-Agent
User-Agent
- Cache settings
-
- Directory
-
- Size [KiB]
Mărime [KiB]
- Clear
- Şterge
+
- Use proxy for web access
-
- Host
-
- Port
Port
- User
Utilizator
- Leave this blank if no proxy username / password are required
-
- Password
Parolă
- Proxy type
-
- Exclude URLs (starting with)
-
@@ -37668,7 +37386,7 @@ Always network: always load from network and do not check if the cache has a val
Missing objects
-
@@ -37684,17 +37402,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -37702,7 +37420,7 @@ Missing some of the .ui template objects:
Connection to database failed
- Conexiunea cu baza de date a eşuat
+
SQL:%1
error:%2
-
Database connection was successful, but the accessible tables could not be determined.
- Conexiunea cu baza de date a reuşit, dar tabelele accesibile nu au putut fi determinate.
+
Unable to get list of spatially enabled tables from the database
- Nu s-a putu obţine o listă cu tabele pregătite spaţial din baza de date
+
Unsupported geometry type %1 in %2.%3.%4 ignored
-
View %1.%2 doesn't have integer columns for use as keys.
-
Line
- Linie
+
Multiline
- Multilinie
+
Polygon
- Poligon
+
Multipolygon
- Multipoligon
+
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
Also list tables with no geometry
- De asemenea, afișează lista tabelelor fără geometrie
+
Port
- Port
+
1521
- 1521
+
&Test Connect
-
Save Password
- Salvare parolă
+
Host
-
Use estimated table statistics for the layer metadata.
-
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Use estimated table metadata
-
@@ -38052,12 +37770,12 @@ error:%2
%1 as %2 in %3
-
as geometryless table
-
@@ -38065,12 +37783,12 @@ error:%2
Add Oracle GeoRaster Layer...
-
Add a Oracle Spatial GeoRaster...
-
@@ -38078,52 +37796,52 @@ error:%2
Whole number
-
Whole big number
-
Decimal number (numeric)
-
Decimal number (decimal)
-
Decimal number (real)
-
Decimal number (double)
-
Text, fixed length (char)
- Text, lungime fixă (reduce)
+
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
- Oracle
+
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
- Interogarea personalizată nu e o interogare selectată.
+
Nu se poate realiza interogarea.
-Mesajul de eroare din baza de date a fost:
-%1.
-SQL: %2
+
Primary key field %1 not found in %2
-
Primary key field '%1' for view not unique.
- Câmpul '%1' cheie primară pentru vizializare nu este unic.
+
Key field '%1' for view not found.
- Câmpul cheie '%1' pentru vizualizare nu a fost găsit.
+
No key field for view given.
- Nu s-a dat câmp cheie pentru vizualizare.
+
No key field for query given.
- Nu s-a dat câmp cheie pentru interogare.
+
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Geometry type and srid for empty column %1 of %2 undefined.
- Tip geometrie şi srid pentru coloană goală %1 din %2 nedefinite.
+
Feature type or srid for %1 of %2 could not be determined or was not requested.
- Tip trăsătură sau srid pentru %1 din %2 nu a putut fi determinat sau nu a fost cerut.
+
Editing and adding disabled for 2D+ layer (%1; %2)
- Editarea şi adăugarea dezactivate pentru stratul 2D+ strat (%1; %2)
+
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -38570,7 +38285,7 @@ Error: %2
New Connection...
- Conexiune nouă...
+
@@ -38583,27 +38298,27 @@ Error: %2
Confirm Delete
-
Password for %1/<password>@%2
-
Please enter your password:
-
Open failed
-
The connection to %1 failed. Please verify your connection parameters. Make sure you have the GDAL GeoRaster plugin installed.
-
@@ -38611,52 +38326,52 @@ Error: %2
Add Oracle Table(s)
-
&Add
-
&Set Filter
- &Setare Filtru
+
Set Filter
- Setare Filtru
+
Wildcard
- Element substituent
+
RegExp
- RegExp
+
All
- Tot
+
Owner
- Proprietar
+
Table
-
Geometry column
- Coloană geometrie
+
Primary key column
-
SRID
-
Sql
- Sql
+
Confirm Delete
-
Load connections
- Încarcare conexiuni
+
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
- Trebuie să selectaţi un tabel pentru a putea adăuga un strat.
+
Stop
-
Connect
- Conectare
+
@@ -38735,7 +38450,7 @@ Error: %2
Select...
-
Owner
- Proprietar
+
Table
-
Geometry column
- Coloană geometrie
+
SRID
-
Primary key column
-
Select at id
-
Sql
- Sql
+
Specify a geometry type
-
Enter a SRID
-
Select a primary key
-
Select...
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -38825,12 +38540,12 @@ Error: %2
Edit...
- Editare...
+
Delete
-
Copying features...
- Copiere entități...
+
Abort
- Renunţare
+
%1: Not a vector layer!
- %1: Nu este un strat vectorial!
+
%1: OK!
- %1: OK!
+
Delete layer
- Ştergere strat
+
Layer deleted successfully.
- Strat şters.
+
@@ -38904,7 +38619,7 @@ Error: %2
New Connection...
- Conexiune nouă...
+
@@ -38912,12 +38627,12 @@ Error: %2
%1 as %2 in %3
-
as geometryless table
-
@@ -38930,17 +38645,17 @@ Error: %2
Band
- Bandă
+
Value
- Valoare
+
Color
- Culoare
+
Paste Transformations
-
<b>Note: This function is not useful yet!</b>
-
Source
- Sursă
+
Destination
-
@@ -38976,17 +38691,17 @@ Error: %2
Square
-
Flat
-
Round
-
@@ -38994,17 +38709,17 @@ Error: %2
Bevel
-
Miter
-
Round
-
@@ -39012,32 +38727,32 @@ Error: %2
Solid Line
-
No Pen
-
Dash Line
-
Dot Line
-
Dash Dot Line
-
Dash Dot Dot Line
-
@@ -39145,59 +38860,59 @@ Error: %2
SSL mode
-
Username
-
Password
-
Name of the new connection
-
5432
- 5432
+
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
Only show layers in the layer registries
-
Restrict the search to the public schema for spatial tables not in the geometry_columns table
-
When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
-
Only look in the 'public' schema
-
Use estimated table statistics for the layer metadata.
-
Use estimated table metadata
-
Also list tables with no geometry
- De asemenea, afișează lista tabelelor fără geometrie
+
Don't resolve type of unrestricted columns (GEOMETRY)
-
@@ -39274,13 +38989,13 @@ Error: %2
Wildcard
- Element substituent
+
RegExp
- RegExp
+
Geometry column
- Coloană geometrie
+
Primary key column
-
Confirm Delete
-
Load connections
- Încarcare conexiuni
+
XML files (*.xml *XML)
-
Select Table
-
You must select a table in order to add a layer.
- Trebuie să selectaţi un tabel pentru a putea adăuga un strat.
+
Select...
-
Table
-
Data Type
-
Spatial Type
-
Primary Key
-
Select at id
-
Select a primary key
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Select...
-
Specify a geometry type
-
Enter a SRID
-
Form
-
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- Lăţime
+
Height
- Înălţime
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39503,149 +39218,149 @@ Error: %2
Select a picture
-
...
- ...
+
QgsPluginInstaller
Looking for new plugins...
-
There is a new plugin available
-
There is a plugin update available
-
QGIS Python Plugin Installer
-
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
- Eroare necunoscută
+
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
-
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
-
Plugin installation failed
-
Plugin has disappeared
-
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
-
Plugin installed successfully
-
Plugin reinstalled successfully
-
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
-
The plugin is broken. Python said:
-
Plugin uninstall failed
-
Are you sure you want to uninstall the following plugin?
-
Warning: this plugin isn't available in any accessible repository!
-
Plugin uninstalled successfully
-
Unable to add another repository with the same URL!
-
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
@@ -39653,23 +39368,23 @@ You need to restart QGIS in order to reload it.
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
QGIS Official Plugin Repository
-
Nothing to remove! Plugin directory doesn't exist:
-
Failed to remove the directory:
-
Check permissions or remove it manually
-
@@ -39680,7 +39395,7 @@ You need to restart QGIS in order to reload it.
Resolving host name...
- Rezolvare nume gazdă ...
+
Connecting...
@@ -39688,7 +39403,7 @@ You need to restart QGIS in order to reload it.
Host connected. Sending request...
- Gazdă conectată. Trimitere cerere...
+
Downloading data...
@@ -39696,15 +39411,15 @@ You need to restart QGIS in order to reload it.
Idle
- Inactiv
+
Closing connection...
- Închidere conexiune...
+
Error
- Eroare
+
@@ -39712,7 +39427,7 @@ You need to restart QGIS in order to reload it.
Fetching repositories
-
Abort fetching
-
State
-
@@ -39771,11 +39486,11 @@ You need to restart QGIS in order to reload it.
Failed to unzip the plugin package. Probably it's broken or missing from the repository. You may also want to make sure that you have write permission to the plugin directory:
-
Aborted by user
-
@@ -39783,24 +39498,24 @@ You need to restart QGIS in order to reload it.
QGIS Python Plugin Installer
-
Installing plugin:
-
Connecting...
- Conectare...
+
QgsPluginInstallerPluginErrorDialog
no error message received
-
@@ -39808,17 +39523,17 @@ You need to restart QGIS in order to reload it.
Error loading plugin
-
The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below:
-
Do you want to uninstall this plugin now? If you're unsure, probably you would like to do this.
-
@@ -39826,50 +39541,50 @@ You need to restart QGIS in order to reload it.
Repository details
-
Enter a name for the repository
-
Name
- Nume
+
Enter the repository URL, beginning with "http://"
-
Enable or disable the repository (disabled repositories will be omitted)
-
Parameters
- Parametri
+
?qgis=
-
URL
-
Enabled
- Activat
+
@@ -39883,22 +39598,22 @@ You need to restart QGIS in order to reload it.
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
-
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
Installable
category: plugins that are available for installation
-
This plugin is incompatible with this version of QGIS
-
Plugin designed for QGIS %1
compatible QGIS version(s)
-
This plugin requires a missing module
-
This plugin is broken
-
There is a new version available
-
This is a new plugin
-
Installed version of this plugin is higher than any version found in repository
-
This plugin is experimental
-
This plugin is deprecated
-
Category
-
Tags
- Etichete
+
Author
-
More info
-
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Upgrade plugin
-
Downgrade plugin
-
Install plugin
-
Reinstall plugin
-
Reload all repositories
-
Only show plugins from selected repository
-
Clear filter
-
connected
-
The repository is connected
-
unavailable
-
The repository is enabled, but unavailable
-
disabled
-
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
@@ -40163,63 +39878,63 @@ You need to restart QGIS in order to reload it.
Plugin Manager
-
All
- Tot
+
Installed
-
Installed plugins
-
Not installed plugins available for download
-
Upgradeable
-
Installed plugins with more recent version available for download
-
New
-
Not installed plugins seen for the first time
-
Invalid
-
Broken and incompatible installed plugins
-
Settings
- Setări
+
Not installed
-
about:blank
- about:blank
+
Upgrade all upgradeable plugins
-
Upgrade all
-
Uninstall the selected plugin
-
Uninstall plugin
-
Install, reinstall or upgrade the selected plugin
-
Reinstall plugin
-
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
Check for updates on startup
-
every time QGIS starts
-
once a day
-
every 3 days
-
every week
-
every 2 weeks
-
every month
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
Show also experimental plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
-
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Plugin repositories
-
Status
-
Name
- Nume
+
URL
-
Reload repository contents
(useful when you uploaded a plugin there)
-
Reload repository
-
Configure an additional plugin repository
-
Add a new plugin repository
-
Add...
- Adaugă...
+
Edit the selected repository
-
Edit...
- Editare...
+
Remove the selected repository
-
Delete
-
@@ -40521,7 +40236,7 @@ p, li { white-space: pre-wrap; }
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Horizontal distance
- Distanţă orizontală
+
Vertical distance
- Distanţă verticală
+
Horizontal displacement
- Deplasare orizontală
+
Vertical displacement
- Deplasare verticală
+
@@ -40686,7 +40401,7 @@ Eroare: fără tampon rezultat
%1 cursor states lost.
SQL: %2
Result: %3 (%4)
-
None
-
TopoGeometry
-
invalid PostgreSQL topology layer
-
PostgreSQL layer has no primary key.
-
Date
- Dată
+
PostgreSQL layer has unknown primary key type.
-
Field %1 ignored, because of unsupported type type %2
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Could not find topology of layer %1.%2.%3
-
PostgreSQL version: unknown
-
unknown
- necunoscut
+
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -41079,7 +40794,7 @@ PostGIS %2
Loading layer %1
-
Select project file
-
QGIS files
- Fișiere QGIS
+
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -41170,12 +40885,12 @@ Alegeţi ignorare pentru a continua încărcarea fără straturile lipsă. Alege
Select layers and groups to embed
-
Project file
-
QgsProjectProperties
- Layer
Strat
- Type
Tip
- Identifiable
Identificabil
- Vector
Vector
- WMS
WMS (sistem de modelare bazin hidrografic)
- Raster
Raster
- Coordinate System Restriction
Restricţie sistem de coordonate
- No coordinate systems selected. Disabling restriction.
Nu a fost selectat nici un sistem de coordonate. Anulare restricţie.
- Selection color
Selectare culoare
- Measure tool (CRS transformation: %1)
-
- Canvas units (CRS transformation: %1)
-
+ OFF
-
+ ON
-
- CRS %1 was already selected
CRS %1 a fost deja selectat
- Coordinate System Restrictions
Restricţii sistem de coordonate
- The current selection of coordinate systems will be lost.
Proceed?
Selecţia actuală a sistemelor de coordonate va fi pierdută.
Continuaţi?
- Select print composer
-
- Composer Title
-
- Select restricted layers and groups
-
- Enter scale
Introducere scară
- Scale denominator
Denominator scară
- Load scales
Încărcare scări
- XML files (*.xml *.XML)
Fişiere XML (*.xml *.XML)
- Save scales
Salvare scări
- Select a valid symbol
Selectare simbol valid
- Invalid symbol :
Simbol nevalid:
- Parameters:
Parametri:
+ Select %1 from pull-down menu to adjust radii
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
Poate folosi doar calcule elipsoidale atunci când transformarea CRS este activată
@@ -41360,7 +41075,6 @@ Continuaţi?
Project title
Titlu proiect
@@ -41400,159 +41114,159 @@ Continuaţi?
Salvare căi
- Measure tool
Instrument de măsură
- Semi-minor
Semi-minor
- Semi-major
Semi-major
- Used when CRS transformation is turned off
Folosit când transformarea CRS este închisă
- Canvas units
Unităţi cadru
- Meters
Metri
- Feet
Picioare
CRS
-
Coordinate Reference System
-
Identify layers
-
Default styles
-
OWS server
-
- Ellipsoid
(for distance calculations)
-
- Degree
Grad
- Degree display
Afişare grad
- Decimal degrees
Grade zecimale
- Degrees, Minutes
Grade, minute
- Degrees, Minutes, Seconds
Grade, minute, secunde
- Precision
Precizie
- Automatically sets the number of decimal places in the mouse position display
Setare automată a numărului de locuri zecimale în afişarea poziţiei mouse-ului
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
Numărul de locuri zecimale care sunt folosite atunci când afişarea poziţiei mouse-ului este setată automat a fi suficientă pentru ca mişcarea acestuia cu câte un pixel să schimbe afişarea poziţiei
- Automatic
Automat
- Sets the number of decimal places to use for the mouse position display
Setare număr de locuri zecimale pentru utilizarea afişării poziţiei mouse-ului
- Manual
Manual
- The number of decimal places for the manual option
Numărul de locuri zecimale pentru opţiunea manuală
- decimal places
locuri zecimale
- Project scales
Scări proiect
- ...
...
- Enable 'on the fly' CRS transformation
Permite transformare rapidă CRS
@@ -41562,244 +41276,239 @@ Continuaţi?
Straturi identificabile
- Project layers
-
- Layer
Strat
- Type
Tip
- Identifiable
Identificabil
- Marker
Marcator
- Line
Linie
- Default symbols
-
- Fill
Umplere
- Color Ramp
Gamă culori
- Transparency
- Transparenţă
+
- %
- %
+
- Style Manager
Manager stil
- Options
Opţiuni
Relations
-
- Project file
-
-
- Nautical miles
-
- Assign random colors to symbols
Atribuire de culori aleatorii simbolurilor
- Service capabilities
-
- Person
Persoană
- Title
Titlu
- Organization
Organizaţie
- Online resource
Resurse online
- E-Mail
E-mail
- Phone
Telefon
- Abstract
Rezumat
- Fees
- Taxe
+
- Access constraints
-
- Keyword list
-
- WMS capabilities
-
- Add geometry to feature response
-
- Min. X
Minim X
- Min. Y
Minim Y
- Max. X
Maxim X
- Max. Y
Maxim Y
- Use Current Canvas Extent
Utilizare extindere cadru actuală
- Used
Utilizat
- Exclude composers
-
- WFS capabilities
-
- WCS capabilities
-
- Exclude layers
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
- Published
Publicat
- Update
- Actualizare
+
- Insert
-
- Delete
-
- Unselect all
-
- Select all
-
Macro
- Advertised URL
-
- Width
- Lăţime
+
- Height
- Înălţime
+
- Maximums for GetMap request
-
- Advertised extent
-
- CRS restrictions
-
- Python macros
Macro Python
@@ -41903,7 +41612,7 @@ Din această cauză selectorul proiecţiei nu va funcţiona...
Selected CRS:
-
Set provider filter on %1
-
The where clause returned %n row(s).
returned test rows
-
-
+
Query Builder
- Creator de Interogari
+
Datasource
-
Fields
- Câmpuri
+
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
-
Values
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
-
Sample
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
-
All
- Tot
+
Use unfiltered layer
-
Operators
- Operatori
+
Provider specific filter expression
-
@@ -42150,29 +41855,29 @@ p, li { white-space: pre-wrap; }
Editable
- Editabil
+
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42180,17 +41885,17 @@ p, li { white-space: pre-wrap; }
Form
-
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Minimum
- Minimum
+
Raster calculator
-
Raster bands
-
Result layer
-
Output layer
- Strat rezultat
+
Current layer extent
-
X min
- X min
+
XMax
-
Y min
- Y min
+
Y max
- Y max
+
Columns
- Coloane
+
Rows
- Rânduri
+
Add result to project
- Adăugare rezultat la proiect
+
Operators
- Operatori
+
sqrt
-
sin
-
acos
-
cos
-
asin
-
tan
-
atan
-
Raster calculator expression
-
@@ -42419,27 +42124,27 @@ p, li { white-space: pre-wrap; }
Format not supported
-
Value
- Valoare
+
Text
- Text
+
Html
-
Feature
- Trăsătură
+
@@ -42471,7 +42176,7 @@ p, li { white-space: pre-wrap; }
JPEG compression
-
For details on pyramids options please see the following pages
-
cannot validate pyramid options
-
Cannot validate creation options
-
pyramid creation option
-
creation option
-
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Display
-
Draw as lines
-
Draw as lines (only int layers)
-
Actions
- Acţiuni
+
Set min/max style for
-
Identify
- Identificare
+
Build Pyramids
-
Create Datasources
-
Remove Datasources
-
Band
- Bandă
+
@@ -42824,12 +42529,12 @@ Elimină toate straturile tematice din Zona de Previzualizare
QgsRasterLayer created
-
Raster
- Raster
+
NoDataValue not set
-
Driver
-
Data Type
-
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
-
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
<maplayer> not found.
-
@@ -43012,42 +42717,42 @@ Elimină toate straturile tematice din Zona de Previzualizare
Not Set
- Nu este setat
+
Description
- Descriere
+
Large resolution raster layers can slow navigation in QGIS.
-
By creating lower resolution copies of the data (pyramids) performance can be considerably improved as QGIS selects the most suitable resolution to use depending on the level of zoom.
-
You must have write access in the directory where the original data is stored to build pyramids.
-
Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
-
Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
-
Layer Properties - %1
-
Bilinear
- Biliniar
+
Percent Transparent
-
Indexed Value
-
No-Data Value: %1
-
Write access denied
- Access tip scriere nu este permis
+
Write access denied. Adjust the file permissions and try again.
-
Building pyramids failed.
-
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
-
Building pyramid overviews is not supported on this type of raster.
-
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
-
Save file
- Salvare fişier
+
Textfile
-
QGIS Generated Transparent Pixel Value Export File
-
Value
- Valoare
+
Write access denied. Adjust the file permissions and try again.
- Access tip scriere nu este permis. Modificaţi permisiunile fişierului si reîncercaţi.
-
-
+
Open file
- Deschidere fişier
+
The following lines contained errors
%1
-
Read access denied
- Acces pentru citire respins
+
Read access denied. Adjust the file permissions and try again.
- Acces pentru citire respins. Ajustaţi permisiunile fişierului şi reîncercaţi.
-
+
Default Style
- Stil implicit
+
Load layer properties from style file
-
QGIS Layer Style File
-
Saved Style
- Stil salvate
+
Save layer properties as style file
-
@@ -43302,69 +43004,69 @@ Elimină toate straturile tematice din Zona de Previzualizare
Save Style ...
- Salvare stil...
+
Load Style ...
- Încărcare stil...
+
Resolutions
- Rezoluții
+
Save As Default
- Salvare ca automat
+
Restore Default Style
- Revenire la stil automat
+
Render type
-
Resampling
-
Oversampling
-
Transparency
- Transparenţă
+
Style
- Stil
+
Layer info
-
Description
- Descriere
+
Keyword list
-
Attribution
-
Url
-
MetadataUrl
-
Type
- Tip
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
- Proprietăţi
+
Band rendering
-
Color rendering
-
Saturation
- Saturaţie
+
Off
-
By lightness
-
By luminosity
-
By average
-
Hue
- Tentă
+
Blending mode
-
Brightness
-
Contrast
-
Grayscale
-
Colorize
-
Strength
-
%
- %
+
Reset all color rendering options to default
-
Reset
- Resetare
+
Zoomed: in
-
out
-
Global transparency
-
No data value
-
Use original source no data value.
-
No data value:
-
Original data source no data value, if exists.
-
<src no data value>
-
Additional user defined no data value.
-
Additional no data value
-
Custom transparency options
-
Transparency band
-
Add values from display
-
Transparent pixel list
-
Add values manually
- Adaugă valoarea manual
+
Remove selected row
-
Default values
-
Export to file
- Exportare în fișier
+
Layer name
- Numele stratului
+
displayed as
-
Layer source
-
Columns
- Coloane
+
No Data
-
Scale dependent visibility
-
Coordinate reference system
- Sistem de coordonate de referinţă
+
Specify the coordinate reference system of the layer's geometry.
- Specificaţi sistemul de coordonate de referinţă al geometriei stratului.
+
Specify...
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Abstract
- Rezumat
+
Build pyramids
-
Resampling method
- Metodă reeşantionare
+
External
-
Internal (if possible)
- Intern (dacă este posibil)
+
External (Erdas Imagine)
-
Warning
-
The directory %1 contains files which will be overwritten: %2
-
Save raster layer as...
-
Output mode
-
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
Create VRT
-
Save as
- Salvare ca
+
Change ...
- Schimba ...
+
Extent
-
Layer resolution
-
Layer size
-
VRT Tiles
-
Maximum number of columns in one tile.
-
Max columns
-
Maximum number of rows in one tile.
-
Max rows
-
Create Options
- Creare opţiuni
+
Pyramid resolutions corresponding to levels given
-
Use existing
-
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
- Valori Fără-Date
+
Add values manually
- Adaugă valoarea manual
+
Load user defined fully transparent (100%) values
-
Remove selected row
-
Clear all
-
@@ -44049,12 +43751,12 @@ datasets with maximum width and height specified below.
No option selected
-
Please select an option to load min/max values.
-
@@ -44120,13 +43822,13 @@ Elimină toate straturile tematice din Zona de Previzualizare
Cumulative
count cut
-
Mean +/-
standard deviation ×
-
External (GTiff .ovr)
-
External (Erdas Imagine .aux)
-
User defined
-
Estimated
-
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
- %1 din %3. {1 %2 ?}
+
@@ -44513,7 +44215,7 @@ Elimină toate straturile tematice din Zona de Previzualizare
Preview Expression
-
@@ -44521,32 +44223,32 @@ Elimină toate straturile tematice din Zona de Previzualizare
Dialog
- Dialog
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -44554,19 +44256,19 @@ Elimină toate straturile tematice din Zona de Previzualizare
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -44574,7 +44276,7 @@ Elimină toate straturile tematice din Zona de Previzualizare
[Generated automatically]
-
@@ -44582,37 +44284,37 @@ Elimină toate straturile tematice din Zona de Previzualizare
Add relation
-
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
- Nume
+
Id
- Id
+
@@ -44626,37 +44328,37 @@ Elimină toate straturile tematice din Zona de Previzualizare
Toggle editing
-
New
-
Delete
-
Link
-
Unlink
-
Form View
-
Table View
- Vizualizare tabelă
+
@@ -44664,47 +44366,47 @@ Elimină toate straturile tematice din Zona de Previzualizare
Dialog
- Dialog
+
Name
- Nume
+
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
- Id
+
Add Relation
-
Remove Relation
-
@@ -44712,17 +44414,17 @@ Elimină toate straturile tematice din Zona de Previzualizare
Open Form
-
(no selection)
-
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -44788,11 +44490,7 @@ Elimină toate straturile tematice din Zona de Previzualizare
Filter returned %n feature(s)
number of filtered features
-
- Filtrul a dat %n trăsături
-
+ Filtrul a dat %n trăsături
@@ -44829,7 +44527,7 @@ Elimină toate straturile tematice din Zona de Previzualizare
- expression -
-
Layer rendering
-
Layer transparency
-
Feature blending mode
-
Layer blending mode
-
Copy
- Copiere
+
Paste
- Lipire
+
<li><nobr>%1 features also in rule %2</nobr></li>
-
Count
-
Duplicate count
-
Max. scale
-
Number of features in this rule.
-
Number of features in this rule which are also present in other rule(s).
-
@@ -45019,17 +44717,17 @@ Elimină toate straturile tematice din Zona de Previzualizare
Add rule
-
Edit rule
-
Remove rule
-
Count features
-
Remove Rule
-
Refine current rule
-
Calculating feature count.
-
Abort
- Renunţare
+
@@ -45270,55 +44968,55 @@ Elimină toate straturile tematice din Zona de Previzualizare
Texture width
- Lăţimea texturii
+
SVG file
-
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Select SVG texture file
-
All files
-
Rotation
-
Color
- Culoare
+
Border color
-
Border width
-
@@ -45326,32 +45024,32 @@ Elimină toate straturile tematice din Zona de Previzualizare
Save style in database
- Salvare stil în baza de date
+
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
@@ -45359,37 +45057,37 @@ Elimină toate straturile tematice din Zona de Previzualizare
Save style
-
Description
- Descriere
+
UI
-
Style Name
-
Use as default style for this layer
-
Open...
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45398,12 +45096,12 @@ Elimină toate straturile tematice din Zona de Previzualizare
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
-
current
-
@@ -45429,7 +45127,7 @@ Elimină toate straturile tematice din Zona de Previzualizare
Scale visibility
-
@@ -45437,7 +45135,7 @@ Elimină toate straturile tematice din Zona de Previzualizare
Search query builder
-
&Clear
-
Save query to an xml file
-
&Load...
-
Load query from xml file
-
Search results
-
Found %n matching feature(s).
test result
-
-
+
Search string parsing error
-
Evaluation error
-
Error during search
-
No Records
-
The query you specified results in zero records being returned.
-
Save query to file
-
Could not open file for writing
-
Load query from file
-
Query files
-
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
Select attribute
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -45580,11 +45274,7 @@ Elimină toate straturile tematice din Zona de Previzualizare
Validation finished (%n error(s) found).
number of geometry errors
-
- Validarea este completă (S-a(u) găsit %n eroare (erori)).
-
+ Validarea este completă (S-a(u) găsit %n eroare (erori)).
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Color (start)
-
Color (end)
-
Blur radius
-
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -45715,13 +45405,13 @@ Eroarea a fost:
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Border color
-
Border width
-
@@ -45746,14 +45436,14 @@ Eroarea a fost:
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Pen width
- Lăţimea peniţei
+
Offset
-
Dash pattern
-
Join style
- Stil îmbinare
+
Cap style
- Stil punct final
+
@@ -45793,14 +45483,14 @@ Eroarea a fost:
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Fill color
-
Border color
-
Outline width
- Lăţimea conturului
+
Horizontal anchor point
-
Vertical anchor point
-
@@ -45848,12 +45538,12 @@ Eroarea a fost:
Black to white
-
White to black
-
Contrast
enhancement
-
Color gradient
-
@@ -45941,7 +45631,7 @@ enhancement
Continuous
-
The color map for band %1 has no entries
-
Remove selected row
-
Sort colormap items
-
Clip
- Decupează
+
Invert
- Inversează
+
Min / max origin:
-
Min / Max origin
-
@@ -46161,17 +45851,17 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
any ONE of the constraints
-
Enable snapping on intersection
-
@@ -46341,7 +46031,7 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
Retrieval of spatialite version failed
-
Could not parse spatialite version string '%1'
-
&Update statistics
-
&Set Filter
- &Setare Filtru
+
Confirm Update Statistics
-
Update Statistics
-
Internal statistics successfully updated for: %1
-
Error while updating internal statistics for: %1
-
Cannot add connection '%1' : a connection with the same name already exists.
-
The spatial query requires at least two vector layers
-
%n selected geometries
selected geometries
-
-
+
Selected geometries
-
%1)Query
-
Begin at %L1
-
Total of features = %1
-
Total of invalid features:
-
Finish at %L1 (processing time %L2 minutes)
-
Using the field "%1" for subset
-
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
all = %1
-
Create new selection
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
enable
-
disable
- dezactivat
+
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Zoom to feature
-
Missing reference layer
-
Select reference layer!
-
Missing target layer
-
Select target layer!
-
Create new layer from items
-
The query from "%1" using "%2" in field not possible.
-
Create new layer from selected
-
%1 of %2 identified
-
@@ -46964,17 +46650,17 @@ CRS of map is %1.
Spatial Query
-
Layer on which the topological operation will select geometries
-
Select source features from
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -46998,39 +46684,39 @@ p, li { white-space: pre-wrap; }
Selected feature(s) only
-
Where the feature
-
Select the topological operation
-
Layer whose geometries will be used as reference by the topological operation
-
Reference features of
-
Select the reference layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -47041,58 +46727,58 @@ p, li { white-space: pre-wrap; }
And use the result to
-
Selected features
-
Number of selected features in map
-
Create layer with selected
-
Result feature ID's
-
Select one FID to identify geometry of feature
-
Create layer with list of items
-
Zoom to item
-
Check to show log processing of query
-
Log messages
-
Run query or close the window
-
@@ -47174,7 +46860,7 @@ p, li { white-space: pre-wrap; }
DB Relation Name
-
Confirm Delete
-
Add Shapefiles
-
Shapefiles
- Fișiere shape
+
The following Shapefile(s) could not be loaded:
-
[New ...] - create a new connection
-
[Edit ...] - edit the currently selected connection
-
[Remove] - remove the currently selected connection
-
-you need to select a connection that works (connects properly) in order to import files
-
-when changing connections Global Schema also changes accordingly
-
[Add ...] - open a File dialog and browse to the desired file(s) to import
-
[Remove] - remove the currently selected file(s) from the list
-
[Remove All] - remove all the files in the list
-
[SRID] - Reference ID for the shapefiles to be imported
-
[Use Default (SRID)] - set SRID to -1
-
[Geometry Column Name] - name of the geometry column in the database
-
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
-
[Global Schema] - set the schema for all files to be imported into
-
[Import] - import the current shapefiles in the list
-
[Quit] - quit the program
-
[Help] - display this help dialog
-
You need to specify a Connection first
-
Please enter your password:
-
Connection failed - Check settings and try again
-
PostGIS not available
-
<p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
-
You need to add shapefiles to the list first
-
Cancel
-
Problem inserting features from file:
-
%1
Invalid table name.
-
%1
No fields detected.
-
%1
The following fields are duplicates:
%2
-
%1
<p>Error while executing the SQL:</p><p>%2</p><p>The database said:%3</p>
-
Import Shapefiles - Relation Exists
-
%1 of %2 shapefiles could not be imported.
-
@@ -47617,20 +47303,20 @@ Do you want to overwrite the [%2] relation?
QGIS Sponsors
- Sponsori QGIS
+
TextLabel
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47664,6 +47350,154 @@ p, li { white-space: pre-wrap; }
<hr /></body></html>
+
+ QgsSqlAnywhereProvider
+
+ Failed to load interface
+
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
+
QgsStyleV2ExportImportDialog
@@ -47684,12 +47518,12 @@ p, li { white-space: pre-wrap; }
file specified below
-
URL specified below
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
Simbolul cu numele '%1' există deja.
Doriţi să salvaţi peste acesta?
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
Gradientul de culoare cu numele '%1' există deja.
Doriţi să salvaţi peste acesta?
@@ -47865,12 +47699,12 @@ Doriţi să salvaţi peste acesta?
Type here to filter symbols...
-
Share Menu
-
Group Actions
-
Group Symbols
-
Edit Smart Group
-
Marker symbol (%1)
-
Line symbol (%1)
-
Fill symbol (%1)
-
Color ramp (%1)
-
Random
-
ColorBrewer
-
new symbol
-
new marker
-
new line
-
new fill symbol
-
Symbol Name
- Numele simbolului
+
Please enter a name for new symbol:
-
Save symbol
-
Cannot save symbol without name. Enter a name.
-
Symbol with name '%1' already exists. Overwrite?
-
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Color Ramp Name
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Cannot save color ramp without name. Enter a name.
-
Save color ramp
-
Color ramp with name '%1' already exists. Overwrite?
-
All Symbols
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
- Grup nou
+
Invalid selection
-
Cannot delete system defined categories.
Kindly select a group or smart group you might want to delete.
-
Error!
- Eroare!
+
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
Database Error
- Eroare bază de date
+
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Add Group
-
Remove Group
-
Apply Group
-
Un-group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
@@ -48241,51 +48075,51 @@ There was a problem with your symbol database.
Select vector layers to add...
-
Layer ID
-
Layer name
- Numele stratului
+
Number of features
-
Geometry type
-
Select raster layers to add...
-
Select layers to add...
-
Type
- Tip
+
Select All
- Selectează tot
+
@@ -48293,7 +48127,7 @@ There was a problem with your symbol database.
Select layers to load
-
SVG annotation
-
Delete
-
Select SVG file
- Selectare fişier SVG
+
SVG request failed [error: %1 - url: %2]
-
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -48353,17 +48187,17 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48373,14 +48207,14 @@ There was a problem with your symbol database.
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Border width
-
Offset
-
SVG file
-
Color
- Culoare
+
Border color
-
Horizontal anchor point
-
Vertical anchor point
-
@@ -48438,12 +48272,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -48451,17 +48285,17 @@ There was a problem with your symbol database.
Select SVG file
- Selectare fişier SVG
+
SVG files
- Fişiere SVG
+
File not found
-
@@ -48469,17 +48303,17 @@ There was a problem with your symbol database.
Size
-
area
- aria
+
diameter
-
@@ -48513,27 +48347,27 @@ There was a problem with your symbol database.
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
@@ -48571,12 +48405,12 @@ There was a problem with your symbol database.
Save symbol
-
Save
- Salvare
+
@@ -48584,37 +48418,37 @@ There was a problem with your symbol database.
Millimeter
- Milimetru
+
Map unit
- Unitate hartă
+
Symbol name
-
Please enter name for the symbol:
-
New symbol
-
Save symbol
-
Symbol with name '%1' already exists. Overwrite?
-
Form
-
Multiline
- Multilinie
+
HTML
- HTML
+
@@ -48741,7 +48575,7 @@ There was a problem with your symbol database.
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
QGIS is open source
-
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
Moving Elements and Maps in the Print Composer
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -48929,9 +48763,9 @@ There was a problem with your symbol database.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
-
Form
-
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Editable
- Editabil
+
@@ -49188,12 +49022,12 @@ p, li { white-space: pre-wrap; }
Form
-
Adjust scaling range
-
@@ -49201,18 +49035,18 @@ p, li { white-space: pre-wrap; }
Select a file
-
Error
- Eroare
+
Could not open file %1
Error was:%2
-
@@ -49220,37 +49054,37 @@ Error was:%2
Form
-
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
-
Value
- Valoare
+
Description
- Descriere
+
Remove Selected
-
@@ -49258,7 +49092,7 @@ Error was:%2
Edit filter expression
-
@@ -49266,52 +49100,52 @@ Error was:%2
Form
-
Select layer, key column and value column
-
Layer
- Strat
+
Key column
-
Value column
-
Allow null value
-
Order by value
-
Allow multiple selections
-
Filter expression
-
...
- ...
+
@@ -49319,7 +49153,7 @@ Error was:%2
(no selection)
-
@@ -49395,12 +49229,12 @@ Error was:%2
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -49441,23 +49275,23 @@ Error was:%2
Continuous
-
Gradient file : %1
-
License file : %1
-
Edit Stop Color
-
Add Color Stop
-
@@ -49499,7 +49333,7 @@ Error was:%2
Change...
- Schimbă...
+
Offset (%)
-
Updating feature count for layer %1
-
Abort
- Renunţare
+
ERROR: no provider
-
ERROR: layer not editable
-
Commit errors:
%1
-
General
- General
+
Layer comment
-
Storage type of this layer
-
Description of this provider
-
Source for this layer
-
Geometry type of the features in this layer
-
Primary key attributes
-
The number of features in this layer
-
Editing capabilities of this layer
-
Extents
- Extent
+
In layer spatial reference system units
-
In project spatial reference system units
-
Layer Spatial Reference System
-
Project (Output) Spatial Reference System
-
Attribute field info
-
Error: qgis element could not be found
-
xMin,yMin %1,%2 : xMax,yMax %3,%4
-
unknown extent
-
(Invalid transformation of layer extents)
-
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
-
+
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
-
+
SUCCESS: %n attribute(s) added.
added attributes count
-
-
+
ERROR: %n new attribute(s) not added
not added attributes count
-
-
+
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
-
+
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
-
+
SUCCESS: %n feature(s) deleted.
deleted features count
-
- SUCCESS: o entitate ștearsă.
- SUCCES: %n entităț(i) șterse.
- SUCCES: %n entităț(i) șterse.
-
+ SUCCESS: o entitate ștearsă. SUCCES: %n entităț(i) șterse. SUCCES: %n entităț(i) șterse.
ERROR: %n feature(s) not deleted.
not deleted features count
-
-
+
SUCCESS: %n feature(s) added.
added features count
-
-
+
ERROR: %n feature(s) not added.
not added features count
-
-
+
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
-
+
ERROR: %n geometries not changed.
not changed geometries count
-
-
+
Provider errors:
-
@@ -49869,7 +49651,7 @@ Error was:%2
QGIS Layer Style File
-
Load from file
- Încărcare din fişier
+
Load from database
-
Save in database (%1)
-
Layer Properties - %1
-
Stop editing mode to enable this.
-
This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
-
The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
-
Not supported
-
Creation of spatial index successful
-
Load default style from:
-
Cancel
-
Local database
-
Datasource database
-
Loaded from Provider
-
No default style was found for this layer
-
Save default style to:
-
Load layer properties from style file
-
Style saved
-
Save layer properties as style file
-
Error occured retrieving styles from database
-
The retrieved style is not a valid named style. Error message: %1
-
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
Description
- Descriere
+
Keyword list
-
DataUrl
-
Attribution
-
Url
-
MetadataUrl
-
Type
- Tip
+
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
Properties
- Proprietăţi
+
Rendering
- Randare
+
Layer info
-
Layer source
-
Data source encoding
-
Coordinate reference system
- Sistem de coordonate de referinţă
+
Specify...
-
Create spatial index
-
Update extents
-
Scale dependent visibility
-
Feature subset
-
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
- pixeli
+
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
displayed as
-
Feature symbology
-
Symbol layer symbology
-
<Default>
-
Symbology export
-
Datasource Options
-
Custom Options
-
Layer Options
-
Save only selected features
-
1:
- 1:
+
Scale
- Scară
+
@@ -50608,7 +50390,7 @@ Error was:%2
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -50634,12 +50416,12 @@ Error was:%2
DescribeFeatureType failed for url %1
-
WFS
- WFS
+
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
@@ -50700,17 +50482,17 @@ Error was:%2
&Add
-
&Build query
-
Build query
-
Filter:
-
Display WFS FeatureTypes containing this word in the title, name or abstract
-
Use title for layer name
-
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
&Add
-
Add selected layers to map
-
Confirm Delete
-
Load connections
- Încarcare conexiuni
+
XML files (*.xml *XML)
-
encoding %1 not supported.
-
WMS Provider
-
Failed to parse WMS URI
-
Failed to download capabilities:
-
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
Options (%n coordinate reference systems available)
crs count
-
-
+
Select layer(s)
-
Select layer(s) or a tileset
-
Select either layer(s) or a tileset
-
Coordinate Reference System (%n available)
crs count
-
-
+
No common CRS for selected layers.
-
No CRS selected
- Nici un sistem de coordonate de referinţă selectat
+
No image encoding selected
-
%n Layer(s) selected
selected layer count
-
-
+
Tileset selected
-
Could not understand the response. The %1 provider said:
%2
-
WMS proxies
-
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
-
parse error at row %1, column %2: %3
-
network error: %1
-
The %1 connection already exists. Do you want to overwrite it?
-
Confirm Overwrite
-
@@ -51173,7 +50943,7 @@ Error was:%2
Add Layer(s) from a WM(T)S Server
-
empty capabilities document
-
Tried URL: %1
-
empty of capabilities: %1
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -51371,7 +51141,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
- WCS
+
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51523,12 +51293,12 @@ Response was:
Response was:
%4
-
Service Exception
-
Cannot verify coverage full extent: %1
-
(and %n more)
crs
-
- (şi %n mai mult)
- (şi %n mai mult)
- (şi %n mai multe)
-
+ (şi %n mai mult) (şi %n mai mult) (şi %n mai multe)
Format not supported
-
Read data error
-
RasterIO error:
-
@@ -51764,12 +51530,12 @@ Response was:
...
- ...
+
Select a file
-
@@ -51777,22 +51543,22 @@ Response was:
Form
-
Field contains a filename or URL for a webpage
-
Width
- Lăţime
+
Height
- Înălţime
+
@@ -51800,33 +51566,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
- %1 din %2 biţi capacităţi descărcaţi.
+
Capabilities request redirected.
- Cerere capacităţi redirecţionată.
+
Redirect loop detected: %1
-
WMS
-
empty of capabilities: %1
-
Download of capabilities failed: %1
- Descărcare capacităţi eşuată: %1
+
@@ -51834,7 +51600,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
-
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51882,22 +51648,22 @@ Response was:
Cannot parse URI
-
Cannot calculate extent
- Extensiunea nu poate fi calculată
+
Cannot set CRS
-
Number of layers and styles don't match
-
WMS
-
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
Getting map via WMS.
-
Getting tiles.
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
image is NULL
-
unexpected image size
-
Status: %1
Reason phrase: %2
-
Redirect loop detected: %1
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
- Cererea conţine un format care nu este pus la dispoziţie de server.
+
Request contains a CRS not offered by the server for one or more of the Layers in the request.
-
Request contains a SRS not offered by the server for one or more of the Layers in the request.
-
GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
-
Request is for a Layer in a Style not offered by the server.
-
GetFeatureInfo request is applied to a Layer which is not declared queryable.
-
GetFeatureInfo request contains invalid X or Y value.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
- Valoarea parametrului (opţional) UpdateSequence din cererea GetCapabilities este egală cu valoarea actuală a numărului secvenţă de service al actualizării metadatelor.
+
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
- Valoarea parametrului (opţional) UpdateSequence din cererea GetCapabilities este mai mare decât valoarea actuală a numărului secvenţă a serviciului de actualizare al metadatelor.
+
Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
-
Request contains an invalid sample dimension value.
-
Request is for an optional operation that is not supported by the server.
-
Can Zoom In
-
Cascade Count
-
(and %n more)
crs
-
- (şi încă %n în plus)
- (şi încă %n în plus)
- (şi încă %n în plus)
-
+ (şi încă %n în plus) (şi încă %n în plus) (şi încă %n în plus)
LegendURLs
-
Tile Layer Properties
-
Cache Stats
- Statistici lot
+
WMS Version
-
Keywords
- Cuvinte cheie
+
Online Resource
- Resursă online
+
Layer Count
-
Tile Layer Count
-
GetLegendGraphic
-
Tile templates
-
FeatureInfo templates
-
Tileset Properties
-
Identifier
-
Tile mode
-
Invalid tile mode
-
Bounding Box
-
Available Tilesets
-
Selected tile matrix set
-
Scale
- Scară
+
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
Width
- Lăţime
+
Height
- Înălţime
+
Top
- Sus
+
Left
- Stânga
+
Bottom
- Jos
+
Right
- Dreapta
+
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Cache stats
-
Hits
-
Misses
-
Format not supported
-
Context not fully specified (extent was defined but width and/or height was not).
-
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
Cannot identify
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
Map getfeatureinfo error %1: %2
-
Cannot parse getfeatureinfo: %1
-
Map getfeatureinfo error: %1 [%2]
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52602,18 +52340,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
-
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -52696,7 +52418,7 @@ Reason phrase: %2
Select dimensions
-
Record Metadata
-
@@ -53019,12 +52741,12 @@ Reason phrase: %2
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
SLDatabase
Run &Vacuum
-
&Database
-
Sorry
- Ne pare rău
+
No database selected or you are not connected to it.
-
SaDbTableModel
+ Schema
- Schemă
+ Schemă
+ Table
- Tabel
+ Tabel
+ Type
- Tip
+ Tip
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretare linie
+ Interpretare linie
+ Geometry column
- Coloană geometrie
+ Coloană geometrie
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- Salvare conexiune
+ Salvare conexiune
+ Should the existing connection %1 be overwritten?
- Doriţi suprascrierea conexiunii existente %1?
+ Doriţi suprascrierea conexiunii existente %1?
+ Failed to load interface
- Eroare încărcare interfaţă
+ Eroare încărcare interfaţă
+ Test connection
- Test conexiune
+ Test conexiune
+ Connection to %1 was successful
- Conexiune la %1 reuşită
+ Conexiune la %1 reuşită
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- Conexiune ratată. Verificaţi setările şi reîncercaţi. Cod eroare SQL Anywhere: %1 Descriere: %2
+ Conexiune ratată. Verificaţi setările şi reîncercaţi. Cod eroare SQL Anywhere: %1 Descriere: %2
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- Creare conexiune SQL Anywhere nouă
+ Creare conexiune SQL Anywhere nouă
+ Connection Information
- Informaţii conexiune
+ Informaţii conexiune
+ Name
- Nume
+ Nume
+ Host
- Adresă (host)
+ Adresă (host)
+ Port
- Port
+ Port
+ Server
- Server
+ Server
+ Database
- Baza de date
+ Baza de date
+ Connection Parameters
- Parametrii conexiune
+ Parametrii conexiune
+ Username
- Nume Utilizator (Login)
+ Nume Utilizator (Login)
+ Password
- Parola
+ Parola
+ Name of the new connection
- Numele conexiunii noi
+ Numele conexiunii noi
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- Numele sau adresa IP a computerului ce găzduieşte serverul pentru baza de date (lăsaţi spaţiu gol pentru conexiuni locale)
+ Numele sau adresa IP a computerului ce găzduieşte serverul pentru baza de date (lăsaţi spaţiu gol pentru conexiuni locale)
+ Port number used by the database server (leave blank for default 2638)
- Număr port folosit de cptre serverul bazei de date (lăsaţi spaţiu gol pentru setările automate 2638)
+ Număr port folosit de cptre serverul bazei de date (lăsaţi spaţiu gol pentru setările automate 2638)
+ Name of the database server (leave blank for default server on host)
- Numele serverului bazei de date (lăsaţi spaţiul gol pentru serverul automat pe gazdă)
+ Numele serverului bazei de date (lăsaţi spaţiul gol pentru serverul automat pe gazdă)
+ Name of the database (leave blank for default database on server)
- Numele bazei de date (lăsaţi spaţiu gol pentru baza de date automată de pe server)
+ Numele bazei de date (lăsaţi spaţiu gol pentru baza de date automată de pe server)
+ Additional connection parameters
- Parametrii conexiune suplimentari
+ Parametrii conexiune suplimentari
+ Database username
- Nume utilizator bază de date
+ Nume utilizator bază de date
+ Database password
- Parolă bază de date
+ Parolă bază de date
+ Save the connection username in the registry
- Salvare nume utilizator conexiune în registru
+ Salvare nume utilizator conexiune în registru
+ Save Username
- Salvare nume utilizator
+ Salvare nume utilizator
+ &Test Connect
- &Test conectare
+ &Test conectare
+ Save the connection password in the registry (WARNING: NOT SECURE)
- Salvare parolă conexiune în registru (AVERTIZARE: NESIGUR)
+ Salvare parolă conexiune în registru (AVERTIZARE: NESIGUR)
+ Save Password
- Salvare parolă
+ Salvare parolă
+ Encrypt packets using simple encryption
- Criptare pachete folosind criptare simplă
+ Criptare pachete folosind criptare simplă
+ Simple Encryption
- Criptare simplă
+ Criptare simplă
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- Folosire estimări pentru anumite proprietăţi ale straturilor precum număr cardinal, răspândire, etc. (îmbunătăţeşte performanţa)
+ Folosire estimări pentru anumite proprietăţi ale straturilor precum număr cardinal, răspândire, etc. (îmbunătăţeşte performanţa)
+ Estimate table metadata
- Estimare metadate sub formă tabelară
+ Estimare metadate sub formă tabelară
+ Search for geometry columns in tables owned by other users
- Căutare de coloane geometrie în tabelele deţinute de alţi utilizatori
+ Căutare de coloane geometrie în tabelele deţinute de alţi utilizatori
+ Search other users' tables
- Căutare tabelele altor utilizatori
+ Căutare tabelele altor utilizatori
SaSourceSelect
+ &Add
- &Adauga
+ &Adauga
+ &Set Filter
- &Setare Filtru
+ &Setare Filtru
+ Wildcard
- Element substituent
+ Element substituent
+ RegExp
- RegExp
+ RegExp
+ All
- Tot
+ Tot
+ Schema
- Schemă
+ Schemă
+ Table
- Tabel
+ Tabel
+ Type
- Tip
+ Tip
+ SRID
- SRID
+ SRID
+ Line Interpretation
- Interpretare linie
+ Interpretare linie
+ Geometry column
- Coloană geometrie
+ Coloană geometrie
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- Sunteţi sigur că doriţi ştergerea conexiunii %1 şi toate setările aferente acesteia?
+ Sunteţi sigur că doriţi ştergerea conexiunii %1 şi toate setările aferente acesteia?
+ Confirm Delete
- Confirma stergerea
+ Confirma stergerea
+ Select Table
- Selectaţi tabelul
+ Selectaţi tabelul
+ You must select a table in order to add a layer.
- Trebuie să selectaţi un tabel pentru a putea adăuga un strat.
+ Trebuie să selectaţi un tabel pentru a putea adăuga un strat.
+ Failed to load interface
- Eroare încărcare interfaţă
+ Eroare încărcare interfaţă
+ Connection failed
- Conexiune ratată
+ Conexiune ratată
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- Conexiunea la baza de date %1 a eşuat. Verificaţi setările şi reîncercaţi.
+ Conexiunea la baza de date %1 a eşuat. Verificaţi setările şi reîncercaţi.
Eroare cod SQL Anywhere: %2
Descriere:%3
+ No accessible tables found
- Nu s-au găsit tabele accesibile
+ Nu s-au găsit tabele accesibile
+ Database connection was successful, but no tables containing geometry columns were %1.
- Conexiunea la baza de date a reuşit, dar nici un tabel conţinând coloane geometrie nu au fost %1.
+ Conexiunea la baza de date a reuşit, dar nici un tabel conţinând coloane geometrie nu au fost %1.
+ found
- Găsit
+ Găsit
+ found in your schema
- Găsit în schema dumneavoastră
+ Găsit în schema dumneavoastră
SaSourceSelectBase
+ Add SQL Anywhere layer
- Adăugare strat SQL Anywhere
+ Adăugare strat SQL Anywhere
+ SQL Anywhere Connections
- Conexiuni SQL Anywhere
+ Conexiuni SQL Anywhere
+ Delete
- Ştergere
+ Ştergere
+ Edit
- Editare
+ Editare
+ New
- Nou(ă)
+ Nou(ă)
+ Connect
- Conectare
+ Conectare
+ Search options
- Opţiuni de căutare
+ Opţiuni de căutare
+ Search
- Căutare
+ Căutare
+ Search mode
- Mod de căutare
+ Mod de căutare
+ Search in columns
- Căutare în coloane
+ Căutare în coloane
+
+
+
+ SaveAsPythonScriptAction
+
+ I/O error
+
+
+ Unable to save edits. Reason:
+ %s
+
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
-
I/O error
-
Unable to save edits. Reason:
%s
-
@@ -53476,179 +53296,179 @@ Descriere:%3
Editor
-
Auto-save script before running
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
- Comentariu:
+
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Enable Object Inspector (switching between tabs may be slow)
-
Console
-
APIs
-
Using preloaded APIs file
-
Path
- Cale
+
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
@@ -53724,20 +53544,24 @@ Descriere:%3
SqlAnywhere
+ Add SQL Anywhere Layer...
- Adaugă Strat SQL Anywhere...
+ Adaugă Strat SQL Anywhere...
+ Store vector layers within a SQL Anywhere database
- Înmagazinare straturi vectoriale în baza de date SQL Anywhere
+ Înmagazinare straturi vectoriale în baza de date SQL Anywhere
+ Invalid Layer
- Strat nevalid
+ Strat nevalid
+ %1 is an invalid layer and cannot be loaded.
- %1 este un strat nevalid si nu poate fi accesat.
+ %1 este un strat nevalid si nu poate fi accesat.
@@ -53765,7 +53589,7 @@ Descriere:%3
Open Library
-
Symbols in group
-
TopologyChecker
-
Topology Checker for vector layer
-
&Topology Checker
-
@@ -53881,13 +53705,13 @@ Descriere:%3
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
-
Feature
@@ -53963,7 +53787,7 @@ Descriere:%3
Force point inside polygon
-
@@ -53976,52 +53800,52 @@ Descriere:%3
Colors
- Culori
+
Fill
- Umplere
+
Border
- Margine
+
Left
- Stânga
+
HCenter
-
Right
- Dreapta
+
Top
- Sus
+
VCenter
-
Bottom
- Jos
+
Outline style
-
Anchor point
-
Data defined properties...
-
Offset X,Y
-
Anchor point
-
Left
- Stânga
+
HCenter
-
Right
- Dreapta
+
Top
- Sus
+
VCenter
-
Bottom
- Jos
+
Two color
-
Color ramp
- Gradient culoare
+
Gradient type
-
Linear
-
Radial
-
Conical
-
Coord mode
-
Object
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
Feature centroid
-
Reference Point 2
-
Data defined properties...
-
Offset X,Y
-
@@ -54268,7 +54092,7 @@ Descriere:%3
Data defined properties...
-
Offset along line
-
Data defined properties
-
Data defined properties...
-
Colors
- Culori
+
Fill
- Umplere
+
Border
- Margine
+
Data defined properties...
-
Gradient colors
-
Two color
-
Color ramp
- Gradient culoare
+
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Blur strength
-
Offset X,Y
-
Data defined properties...
-
@@ -54513,7 +54337,7 @@ Descriere:%3
Colors
- Culori
+
Join style
- Stil îmbinare
+
Data defined properties...
-
Border
- Margine
+
@@ -54591,17 +54415,17 @@ Descriere:%3
Dash pattern unit
-
Data defined properties...
-
Draw line only inside polygon
-
@@ -54624,62 +54448,62 @@ Descriere:%3
Border
- Margine
+
Outline style
-
Outline width
- Lăţimea conturului
+
Anchor point
-
Left
- Stânga
+
HCenter
-
Right
- Dreapta
+
Top
- Sus
+
VCenter
-
Bottom
- Jos
+
Data defined properties...
-
Colors
- Culori
+
°
- °
+
Colors
- Culori
+
Fill
- Umplere
+
Border
- Margine
+
Anchor point
-
Left
- Stânga
+
HCenter
-
Right
- Dreapta
+
Top
- Sus
+
VCenter
-
Bottom
- Jos
+
Data defined properties...
-
SVG Images
-
SVG Groups
-
...
- ...
+
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
-
@@ -54903,7 +54727,7 @@ Descriere:%3
Distance unit
- Unitate de distanţă
+
@@ -54911,17 +54735,17 @@ Descriere:%3
XML Request / Response
-
Request
-
Response
-
@@ -54942,59 +54766,59 @@ Descriere:%3
Topology Checker
- Verificare topologie
+
Validate All
-
Validate Extent
-
Topology not checked yet
-
Configure
-
Show topology errors
-
Show errors
-
Select automatic fix
-
Fix!
-
No errors were found
-
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
Abort
- Renunţare
+
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -55204,7 +55028,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -55214,7 +55038,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -56730,7 +56632,7 @@ Developed by Paolo L. Scala, Barbara Rita Barricelli, Marco Padula
CNR, Milan Unit (Information Technology), Construction Technologies Institute.
For support send a mail to scala@itc.cnr.it
-
Undefined
- Nedefinit
+
No predefined queries loaded
-
Open File
-
New Database connection requested...
-
Error: You must select a database type
-
Error: No host name entered
-
Error: No database name entered
-
Connection to [%1.%2] established
-
connected
-
Tables
-
Connection to [%1.%2] failed: %3
-
Error: Parse error at line %1, column %2: %3
-
Error: Unabled to open file [%1]
-
Error: Query failed: %1
-
Error: Could not create temporary file, process halted
-
Error: A database connection is not currently established
-
@@ -56880,43 +56782,43 @@ For support send a mail to scala@itc.cnr.it
Database Connection
-
Predefined Queries
-
Load predefined queries
-
Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide.
-
The description of the selected query.
-
Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
-
not connected
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -56926,102 +56828,102 @@ p, li { white-space: pre-wrap; }
Database Host
-
Enter the database host. If the database resides on your desktop you should enter ¨localhost¨. If you selected ¨MSAccess¨ as the database type this option will not be available.
-
Password to access the database.
-
Enter the name of the database.
-
Username
-
Enter the port through which the database must be accessed if a MYSQL database is used.
-
Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established.
-
Connect
- Conectare
+
User name to access the database.
-
Select the type of database from the list of supported databases in the drop-down menu.
-
Database Name
-
Password
-
Database Type
-
Port
- Port
+
SQL Query
-
Run the query entered above. The status of the query will be displayed in the Output Console below.
-
Run Query
-
Enter the query you want to run in this window.
-
A window for status messages to be displayed.
-
Output Console
-
@@ -57147,82 +57049,82 @@ p, li { white-space: pre-wrap; }
Display
-
Use the Previous button to display the previous photo when more than one photo is available for display.
-
Previous
-
Use the Next button to display the next photo when more than one photo is available for display.
-
Next
-
All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green.
-
1
- 1
+
Image display area
-
Display area for the image.
-
Options
- Opţiuni
+
File path
-
Attribute containing path to file
-
Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
-
If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
-
Path is relative
-
If checked, the relative path values will be saved for the next session.
-
Remember this
-
Reset to default
-
Resets the values on this line to the default setting.
-
Reset
- Resetare
+
Compass bearing
-
Attribute containing compass bearing
-
Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
-
If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
-
Display compass bearing
-
If checked, the Display Compass Bearing values will be saved for the next session.
-
Compass offset
-
Define the compass offset manually.
-
Manual
- Manual
+
A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
Define the compass offset using a field from the vector layer attribute table.
-
From Attribute
-
Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
If checked, the compass offset values will be saved for the next session.
-
Resets the compass offset values to the default settings.
-
Relative paths
-
The base path or url from which images and documents can be “relative”
-
Base Path
-
The Base Path onto which the relative path defined above will be appended.
-
If checked, the Base Path will be saved for the next session.
-
Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
-
If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
-
Replace entire path/url stored in image path attribute with user defined
Base Path (i.e. keep only filename from attribute)
-
If checked, the current check-box setting will be saved for the next session.
-
Clears the check-box on this line.
-
If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
-
Apply Path to Image rules when loading docs in external applications
-
Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
-
Configure External Applications
-
File extension and external application in which to load a document of that type
-
A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
-
Extension
-
Application
-
Add new file type
-
Add a new file type with a unique extension and the path for the application that can open the file.
-
Delete current row
-
Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
-
@@ -57460,7 +57362,7 @@ Base Path (i.e. keep only filename from attribute)
Zoom in to see more detail.
-
fTools
QGIS version detected:
-
This version of fTools requires at least QGIS version 1.0.0
Plugin will not be enabled.
-
&Analysis Tools
-
Distance matrix
- Matricea distanțelor
+
Sum line lengths
- Însumează lungimile liniilor
+
Points in polygon
-
Basic statistics
-
List unique values
- Afişează valorile unice
+
Nearest neighbour analysis
@@ -57524,31 +57426,31 @@ Plugin will not be enabled.
Mean coordinate(s)
-
Line intersections
- Intersecții linii
+
&Research Tools
-
Random selection
- Selecție aleatoare
+
Random selection within subsets
- Selecție aleatorie în cadrul subseturilor
+
Random points
-
Regular points
- Puncte obișnuite
+
Vector grid
@@ -57556,39 +57458,39 @@ Plugin will not be enabled.
Select by location
- Selectează după locație
+
Polygon from layer extent
- Poligon din extensiunea stratului
+
&Geoprocessing Tools
-
Convex hull(s)
- Convex hull(s)
+
Buffer(s)
- Zonă(e) tampon
+
Intersect
- Intersectează
+
Union
- Uniune
+
Symetrical difference
-
Clip
- Decupează
+
Dissolve
@@ -57596,11 +57498,11 @@ Plugin will not be enabled.
Difference
- Diferență
+
Eliminate sliver polygons
- Elimină poligoanele extrem de mici
+
G&eometry Tools
@@ -57656,7 +57558,7 @@ Plugin will not be enabled.
&Data Management Tools
-
Define current projection
@@ -57682,7 +57584,7 @@ Plugin will not be enabled.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -57698,1869 +57600,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
- <h3>Funcția $uuid</h3>
-Generează un Identificator Unic Universal (UUID) pentru fiecare rând care folosește metoda Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>. Fiecare UUID are o lungime de 38 caractere.
-
-<h4>Sintaxă</h4>
-<pre>$uuid</pre>
-
-<h4>Argumente</h4>
-Niciunul
-
-<h4>Exemplu</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+ <h3>Funcția $uuid</h3>
+Generează un Identificator Unic Universal (UUID) pentru fiecare rând care folosește metoda Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>. Fiecare UUID are o lungime de 38 caractere.
+
+<h4>Sintaxă</h4>
+<pre>$uuid</pre>
+
+<h4>Argumente</h4>
+Niciunul
+
+<h4>Exemplu</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -59613,10 +59461,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59630,10 +59478,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -59654,10 +59502,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -59670,12 +59518,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -59691,16 +59539,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -59729,15 +59577,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -59754,17 +59602,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -59778,17 +59626,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -59804,16 +59652,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -59827,10 +59675,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -59843,10 +59691,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -59860,12 +59708,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -59879,12 +59727,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -59899,17 +59747,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -59919,10 +59767,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -59937,12 +59785,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -59956,12 +59804,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -59975,10 +59823,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -59995,12 +59843,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -60014,17 +59862,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -60039,10 +59887,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -60053,12 +59901,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -60072,17 +59920,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -60095,12 +59943,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -60117,14 +59965,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -60138,15 +59986,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -60155,15 +60003,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -60194,14 +60042,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -60220,14 +60068,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -60332,12 +60180,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -60351,10 +60199,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -60368,10 +60216,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -60388,10 +60236,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -60407,9 +60255,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -60432,11 +60280,11 @@ Returns a string representation of a color based on its hue, saturation, value a
Point x ordinate
-
Point y ordinate
-
@@ -60629,7 +60477,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Calculate shadow maps from sun position determinated by date/time
-
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Category or object oriented statistics
-
Cats
-
Cats (select from the map or using their id)
-
Change category values and labels
-
Change layer number
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Change the type of geometry elements
-
Columns management
-
Compares bit patterns with raster
-
Compress and decompress raster
-
Compress raster
-
Computes a coordinate transformation based on the control points
-
Connect nodes by shortest route (traveling salesman)
-
Connect selected nodes by shortest tree (Steiner tree)
-
Connect vector to database
-
Convert 2D vector to 3D by sampling raster
-
Convert GRASS binary vector to GRASS ASCII vector
-
Convert a raster to vector within GRASS
-
Convert a vector to raster within GRASS
-
Convert bearing and distance measurements to coordinates and vice versa
-
Convert boundaries to lines
-
Convert centroids to points
-
Convert coordinates
-
Convert coordinates from one projection to another (cs2cs frontend)
-
Convert lines to boundaries
-
Convert points to centroids
-
Convert raster to vector areas
-
Convert raster to vector lines
-
Convert raster to vector points
-
Convert vector to raster using attribute values
-
Convert vector to raster using constant
-
Copy also attribute table (only the table of layer 1 is currently supported)
-
Create 3D volume map based on 2D elevation and value rasters
-
Create a MASK for limiting raster operation
-
Create a map containing concentric rings
-
Create a raster plane
-
Create and add new table to vector
-
Create and/or modify raster support files
-
Create aspect raster from DEM (digital elevation model)
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create new GRASS location and transfer data into it
-
Create new GRASS location from metadata file
-
Create new GRASS location from raster data
-
Create new GRASS location from vector data
-
Create new layer with category values based upon user's reclassification of categories in existing raster
-
Create new location from .prj (WKT) file
-
Create new raster by combining other rasters
-
Create new vector by combining other vectors
-
Create new vector with current region extent
-
Create nodes on network
-
Create parallel line to input lines
-
Create points along input lines
-
Create points/segments from input vector lines and positions
-
Create quantization file for floating-point raster
-
Create random 2D/3D vector points
-
Create random cell values with spatial dependence
-
Create random points
-
Create random raster
-
Create random vector point contained in raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create shaded map
-
Create slope raster from DEM (digital elevation model)
-
Create standard vectors
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
Database connection
-
Database file
-
Database management
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Develop map
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector attributes
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
E00 vector layer
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export raster to Geo TIFF
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to VTK-ASCII
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extract features from vector
-
Extract selected features
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
File management
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Filter image
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Help
- Ajutor
+
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Input table
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage features
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Network analysis
- Analiză de rețea
Network maintenance
- Întreținere rețea
Number of rows to be skipped
-
Others
- Altele
Output GML file
-
Output Shapefile
- Fişier shape de ieşire
+
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Projection conversion of vector
-
Projection management
- Administrare proiecție
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster
- Raster
+ Raster
Raster buffer
-
Raster file matrix filter
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
- Recodificare raster
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
- Setări de regiune
Register external data sources in GRASS
- Înregistrați surse de date externe în GRASS
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
- Redenumire coloană din tabela de atribute
Reports
- Rapoarte
Reports and statistics
- Rapoarte și statistici
Reproject raster from another Location
- Reproiectare raster din altă Locație
Reproject vector from another Location
- Reproiectare vector din altă Locație
Resample raster using aggregation
- Reeșantionare raster folosind agregarea
Resample raster using interpolation
- Reeșantionare raster folosind interpolarea
Resample raster. Set new resolution first
- Reeșantionare raster. Setați mai întâi noua rezoluție
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
- Separator (| , etc.)
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
- Simplificare vector
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
- Modele spațiale
Split lines to shorter segments
-
Statistics
- Statistici
Sum raster cell values
-
Surface management
-
Tables management
- Management tabele
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tassled cap vegetation index
-
Terrain analysis
- Analiză teren
+ Analiză teren
Tests of normality on vector points
-
Text file
- Fișier text
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
- Management topologie
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
- Actualizare statistici raster
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector
- Vector
+ Vector
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
- Diagrama Voronoi (arie)
Voronoi diagram (lines)
- Diagrama Voronoi (linii)
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
@@ -62645,34 +62493,34 @@ Returns a string representation of a color based on its hue, saturation, value a
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -62680,7 +62528,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Layer #1
-
Layer #2
-
Tolerance
-
Layer1ID
-
Layer2ID
-
No layer
-
Delete Rule
-
@@ -62740,7 +62588,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid second geometry.
-
Topology plugin
-
Invalid first geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
@@ -62872,11 +62720,11 @@ Returns a string representation of a color based on its hue, saturation, value a
Filled:
- Umplut:
Empty:
- Vid:
N:
@@ -62884,11 +62732,11 @@ Returns a string representation of a color based on its hue, saturation, value a
Mean:
- Medie:
StdDev:
- StdDev:
Sum:
@@ -62908,23 +62756,23 @@ Returns a string representation of a color based on its hue, saturation, value a
Number of unique values:
-
Range:
- Gamă:
Median:
-
Observed mean distance:
-
Expected mean distance:
-
Nearest neighbour index:
@@ -62932,7 +62780,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Z-Score:
-
@@ -62940,17 +62788,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
-
Open number input dialog
-
...
- ...
+
@@ -62966,4 +62814,4 @@ Returns a string representation of a color based on its hue, saturation, value a
...
-
+
\ No newline at end of file
diff --git a/i18n/qgis_zh_CN.ts b/i18n/qgis_zh_CN.ts
index ea5f951e941..a17e704210b 100644
--- a/i18n/qgis_zh_CN.ts
+++ b/i18n/qgis_zh_CN.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -11,14 +9,10 @@
CharacterWidget
-
- <p>Character: <span style="font-size: 24pt; font-family: %1%2</span><p>Value: 0x%3">
- <p>字符：<span style="font-size: 24pt; font-family: %1%2</span><p>Value: 0x%3">
-
<p>Character: <span style="font-size: 24pt; font-family: %1">%2</span><p>Value: 0x%3
- <p>字符：<span style="font-size: 24pt; font-family: %1">%2</span><p>Value: 0x%3"
+ <p>字符：<span style="font-size: 24pt; font-family: %1">%2</span><p>值: 0x%3"
@@ -29,15 +23,15 @@
Setting
- 设置
+
Value
- 值
+
Providers
- 数据源
+
Wrong value
@@ -63,7 +57,7 @@
Coordinate Capture
- 撷取坐标
+ 坐标撷取
Coordinate in map canvas coordinate reference system (lat,lon or east,north)
地图视图坐标参照系中的坐标值（纬度、经度或东、北）
-
- Coordinate in your selected CRS
- 所选坐标参照系中的坐标值
-
-
- Coordinate in map canvas coordinate reference system
- 地图视图坐标参照系中的坐标值
-
Copy to clipboard
@@ -219,7 +205,7 @@
库：
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
<警告> 几何字段表格（geometry_columns table）不存在！
此表在许多GIS应用程序的表格枚举中是必不可少的。
@@ -429,13 +415,13 @@ This table is essential for many GIS applications for enumeration of tables.脚本：
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
<警告> 已安装的脚本版本与发布的脚本版本不一致！
这可能是由不正确的PostGIS升级导致的。
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
<警告> 此用户没有权限读取几何字段表格（geometry_columns table）的内容！
此表在许多GIS应用程序的表格枚举中是必不可少的。
@@ -655,14 +641,6 @@ Query:
Databases
数据库
-
- Invalid MIME uri
- 无效的MIME URI
-
-
- The dropped object is not a valid layer
- 已删除的对象不是有效图层
-
Invalid layer
无效图层
@@ -834,12 +812,12 @@ Query:
An error occured:
- 发生了一个错误：
+ 出现一个错误：
An error occured when executing a query:
- 执行查询时发生了一个错误：
+ 执行查询时出现了一个错误：
Dialog
-
- Connect
- 连接
-
Eliminate sliver polygons
@@ -1262,6 +1236,31 @@ columns
Browse
浏览
+
+ Input vector layer
+ 输入矢量图层
+
+
+ Add result to canvas
+ 结果添加到视图中
+
Selected features:
@@ -1272,14 +1271,6 @@ columns
area
面积
-
- Help
- 帮助
-
-
- Close
- 关闭
-
Extract Nodes
@@ -1290,11 +1281,24 @@ columns
Input line or polygon vector layer
输入线条或多边形矢量图层
+
+ Unique ID field
+ 唯一标识符字段
+
Save to new shapefile
另存为新shape文件
+
+ Output point shapefile
+ 输出点shape文件
+
Tolerance
@@ -1311,32 +1315,19 @@ columns
为每个要素单独计算范围
- Unique ID field
- 唯一标识符字段
-
-
- Output point shapefile
- 输出点shape文件
+ Use only selected features
+ 仅使用选中的要素
Geoprocessing
地理处理
-
- Input vector layer
- 输入矢量图层
-
Intersect layer
@@ -1412,282 +1403,11 @@ columns
Output Shapefile
输出shape文件
-
- Target vector layer
- 目标矢量图层
-
-
- Join vector layer
- 连接矢量图层
-
-
- Output table
- 输出表格
-
-
- Only keep matching records
- 仅保留匹配的记录
-
-
- Keep all records (including non-matching target records)
- 保留全部记录（包括不匹配的目标记录）
-
Generate Centroids
生成质心
-
- creating new selection
- 新建选择
-
-
- adding to current selection
- 正在添加到当前选择里面
-
-
- removing from current selection
- 从当前选择里面移除
-
-
- Select by location
-
-
- Select features in:
- 选择要素于：
-
-
- that intersect features in:
- 与要素相交于：
-
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
-
- Modify current selection by:
- 修改当前选择由：
-
-
- Use selected features only
- 仅使用选中的要素
-
-
- Please specify input layer
- 请指定输入图层
-
-
- Finished
- 完成
-
-
- Processing completed.
- 处理结束。
-
-
- Please specify select layer
- 请指定选择图层
-
-
- Incorrect field names
- 字段名称不正确
-
-
- No output will be created.
-Following field names are longer than 10 characters:
-%1
- 没有创建输出文件。
-以下字段名称超过10个字符：
-%1
-
-
- Error deleting shapefile
- 删除shape文件时出错
-
-
- Can't delete existing shapefile
-%1
- 无法删除已有的shape文件%1
-
-
- Sum line lengths
- 计算线条总长
-
-
- Sum Line Lengths In Polyons
- 计算多边形内线条总长
-
-
- Select directory with shapefiles to merge
- 选择包含要合并的shape文件的目录
-
-
- No shapefiles found
- 未找到shape文件
-
-
- There are no shapefiles in this directory. Please select another one.
- 该目录内没有shape文件。请选择其他目录。
-
-
- Delete error
- 删除错误
-
-
- Can't delete file %1
- 无法删除文件%1
-
-
- Cancel
- 取消
-
-
- Merging
- 正在合并
-
-
- Missing or invalid CRS
- 坐标参照系缺失或无效
-
-
- Please specify input polygon vector layer
- 请指定输入多边形矢量图层
-
-
- Please specify input line vector layer
- 请指定输入线条矢量图层
-
-
- Please specify output length field
- 请指定输出长度字段
-
-
- length field
- 长度字段
-
-
- Random selection within subsets
- 子集内随机选择
-
-
- Input files
- 输入文件
-
-
- Created output point shapefile:
-%s
-
-Would you like to add the new layer to the TOC?
- 已创建输出点shape文件：
-%s
-
-要将新图层添加到地图视图中吗？
-
-
- No output file
- 没有输出文件
-
-
- Please specify output file.
- 请指定输出文件。
-
-
- There are no shapefiles with the given geometry type. Please select an available geometry type.
- shape文件不含给定的几何类型。请选择一个可用的几何类型。
-
-
- Can't delete file %s
- 无法删除文件%s
-
-
- Error loading output shapefile:
-%s
- 载入以下输出shape文件时出错：
-%s
-
-
- Created output shapefile:
-%s
-
-Would you like to add the new layer to the TOC?
- 已创建输出shape文件：
-%s
-
-要将新图层添加到地图视图中吗？
-
-
- Please specify input vector layer
- 请指定输入的矢量图层
-
-
- Please specify an input field
- 请指定一个输入字段
-
-
- Defined Projection For:
-%s.shp
- 已为以下文件定义了投影：
-%s.shp
-
-
- Random Points
- 随机点
-
-
- unstratified
- 不分层
-
-
- stratified
- 分层
-
-
- density
- 密实化
-
-
- field
- 字段
-
-
- Unknown layer type...
- 未知的图层类型...
-
-
- Please specify an input layer
- 请指定一个输入图层
-
-
- Created output shapefiles in folder:
-%s
- 已在目录中创建了输出shape文件：
-%s
-
Weight field
@@ -1704,12 +1424,44 @@ Would you like to add the new layer to the TOC?
标准偏差.
- Regular points
- 正则点
+ Merge shapefiles
+ 合并shape文件
- Please properly specify extent coordinates
- 请指定适当的范围坐标
+ Select by layers in the folder
+ 按目录中的图层选择
+
+
+ Shapefile type
+ Shape文件类型
+
+
+ Polygon
+ 多边形
+
+
+ Line
+ 线条
+
+
+ Point
+ 点
+
+
+ Input directory
+ 输入目录
+
+
+ Add result to map canvas
+ 结果添加到地图视图中
Count Points In Polygons
计算多边形内点的数目
-
- Line intersections
- 线条相交
-
-
- Please specify input line layer
- 请指定一个输入线条图层
-
-
- Please specify output shapefile
- 请指定输出shape文件
-
-
- Please specify line intersect layer
- 请指定线条相交的图层
-
-
- Please specify input unique ID field
- 请指定输入唯一标识符字段
-
-
- Please specify intersect unique ID field
- 请指定相交唯一标识符字段
-
-
- Created output point shapefile:
-%1
-
-Would you like to add the new layer to the TOC?
- 已创建输出点shape文件：
-%1
-
-要将新图层添加到地图视图中吗？
-
-
- Export to new projection
- 导出到新投影
-
-
- No input layer specified
- 未指定输入图层
-
-
- Define current projection
- 定义当前投影
-
-
- Please specify spatial reference system
- 请指定空间参考系统
-
-
- No Valid CRS selected
- 未选择可用的坐标参照系
-
-
- Output spatial reference system is not valid
- 输出空间参考系统无效
-
-
- Please specify target vector layer
- 请指定目标矢量图层
-
-
- Please specify join vector layer
- 请指定要连接的矢量图层
-
-
- Created output shapefile:
-%1
-
-Would you like to add the new layer to the TOC?
- 已创建输出shape文件：
-%1
-
-要将新图层添加到地图视图中吗？
-
-
- Mean coordinates
- 平均坐标
-
-
- Standard distance
- 标准距离
-
-
- (Optional) Weight field
- （可选）权重字段
-
-
- (Optional) Unique ID field
- （可选）唯一标识符字段
-
-
- Coordinate statistics
- 坐标统计
-
-
- No input vector layer specified
- 未指定输入矢量图层
-
-
- Selected features: %1
- 选中的要素：%1
-
-
- Eliminate
- 清除
-
-
- No selection in input layer
- 输入图层中未作选择
-
-
- Commit error:
- %1
- 提交时出错：
-%1
-
-
- Error creating output file
- 创建输出文件时出错
-
-
- Could not delete features
- 无法删除要素
-
-
- Could not replace geometry of feature with id %1
- 无法以标识符%1替换要素的几何图形
-
-
- Could not eliminate features with these ids:
-%1
- 无法清除具有如下标识符的要素：
-%1
-
-
- Could not add features
- 无法添加要素
-
-
- Created output shapefile:
-%1
- 创建输出shape文件：
-%1
-
-
- Join attributes by location
- 按位置连接属性
-
-
- Please specify at least one summary statistic
- 请指定至少一个摘要统计
-
-
- CRS warning!
- 坐标参照系警告！
-
-
- Warning: Input layers have non-matching CRS.
-This may cause unexpected results.
- 警告：输入图层含有不匹配的坐标参照系。
-这可能会导致发生不可预料的结果。
-
-
- Selected features: %s
- 选中的要素：%s
-
-
- Commit error:
-%s
- 提交时出错：
-%s
-
-
- Could not replace geometry of feature with id %s
- 无法以标识符%s替换要素的几何图形
-
-
- Could not eliminate features with these ids:
-%s
- 无法清除具有如下标识符的要素：
-%s
-
-
- Created output shapefile:
-%s
- 已创建输出shape文件：
-%s
-
-
- Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
-
- There were %d vertices in original dataset which
-were reduced to %d vertices after simplification
- 原始数据集中有%d个顶点，简化后剩余%d个
-
-
- Processing of the following layers/files ended with error:<br><br>
- 处理以下图层/文件时结果出了错误：<br><br>
-
-
- Summary field
- 摘要字段
-
-
- No output will be created.
-Following field names are longer than 10 characters:
-%s
- 没有创建输出文件。
-以下字段名称超过10个字符：
-%s
-
-
- Can't delete existing shapefile
-%s
- 无法删除已有的shape文件
-%s
-
-
- Vector grid
- 矢量网格
-
-
- Please specify valid extent coordinates
- 请指定有效范围内的坐标
-
-
- Invalid extent coordinates entered
- 输入的坐标范围无效
-
-
- Generate Vector Grid
- 生成矢量网格
-
Use value from input field
使用值
-
- No input shapefile specified
- 未指定输入shape文件
-
-
- Cannot define projection for PostGIS data...yet!
- 还不能为PostGIS数据定义投影！
-
-
- Identical output spatial reference system chosen
-
-Are you sure you want to proceed?
- 选择了相同的输出空间参考系统
-
-你是否确定要继续？
-
-
- Defined Projection For:
-%1.shp
- 已为以下文件定义了投影：
-%1.shp
-
-
- Please select the projection system that defines the current layer.
- 请选择当前图层的投影系统。
-
-
- Layer CRS information will be updated to the selected CRS.
- 图层的坐标参照系信息将被更新为此处选中的坐标参照系。
-
-
- Split vector layer
- 分割矢量图层
-
-
- Created output shapefiles in folder:
-%1
- 已在目录中创建了输出shape文件：
-%1
-
-
- Random selection
- 随机选择
-
Random Selection Tool
随机选择工具
-
- Count Points in Polygon
- 计算多边形内点的数目
-
-
- Count Points In Polygon
- 计算多边形内点的数目
-
-
- Please specify input point vector layer
- 请指定输入点矢量图层
-
-
- Please specify output count field
- 请指定输出计数字段
-
-
- point count field
- 点计数字段
-
-
- Please select a raster layer
- 请选择一个栅格图层
-
-
- Unable to compute extents aligned on selected raster layer
- 无法计算所选栅格图层的对齐范围
-
-
- Densify geometries
- 密实化几何图形
-
-
- Vertices to add
- 要添加的顶点
-
-
- Warning
- 警告
-
-
- Currently QGIS doesn't allow simultaneous access from
- different threads to the same datasource. Make sure your layer's
- attribute tables are closed. Continue?
- 目前QGIS不允许从不同的线程同时访问相同的数据源。
- 请确保你的图层的属性表已经关闭。
- 要继续吗？
-
-
- Simplify results
- 简化结果
-
-
- There were %1 vertices in original dataset which
-were reduced to %2 vertices after simplification
- 原始数据集中有%1个顶点，简化后剩余%2个
-
-
- Error
- 错误
-
-
- Distance matrix
- 距离矩阵
-
-
- Create Point Distance Matrix
- 创建点距离矩阵
-
-
- Please specify input point layer
- 请指定一个输入点图层
-
-
- Please specify output file
- 请指定输出文件
-
-
- Please specify target point layer
- 请指定目标点图层
-
-
- Please specify target unique ID field
- 请指定目标唯一标识符字段
-
-
- Created output matrix:
-
- 已创建输出矩阵：
-
-
- Error loading output shapefile:
-%1
- 载入以下输出shape文件时出错：
-%1
-
Initial inset from corner (LH side)
从角落处开始插入（左手边）
+
+ Simplify geometries
+ 简化几何图形
+
+
+ Input line or polygon layer
+ 输入线条或多边形图层
+
+
+ Simplify tolerance
+ 简化容差
+
+
+ Save to new file
+ 保存到新文件
+
+
+ Build spatial index
+ 构建空间索引
+
+
+ Select files from disk
+ 从磁盘中选择文件
+
+
+ Select files...
+ 选择文件...
+
+
+ Select all
+ 全选
+
+
+ Select none
+ 不选
+
+
+ Clear list
+ 清除列表
+
Spatial Join
空间连接
+
+ Target vector layer
+ 目标矢量图层
+
+
+ Join vector layer
+ 连接矢量图层
+
Attribute Summary
属性摘要
- Take attributes of first located feature
- 取最先找出的要素的属性
+ Mean
+ 均值
Take summary of intersecting features
取相交要素的属性
-
- Mean
- 均值
-
Min
最小值
-
- Max
- 最大值
-
Sum
@@ -2383,6 +1807,31 @@ were reduced to %2 vertices after simplification
Median
中位数
+
+ Max
+ 最大值
+
+
+ Take attributes of first located feature
+ 取最先找出的要素的属性
+
+
+ Output table
+ 输出表格
+
+
+ Only keep matching records
+ 仅保留匹配的记录
+
+
+ Keep all records (including non-matching target records)
+ 保留全部记录（包括不匹配的目标记录）
+
Random Selection From Within Subsets
@@ -2413,6 +1862,11 @@ were reduced to %2 vertices after simplification
Input line vector layer
输入线条矢量图层
+
+ Generate Vector Grid
+ 生成矢量网格
+
Grid extent
@@ -2504,174 +1958,496 @@ were reduced to %2 vertices after simplification
按Ctrl+C将结果复制到剪贴板
- Use only selected features
+ Vector grid
+ 矢量网格
+
+
+ Please select a raster layer
+ 请选择一个栅格图层
+
+
+ Unable to compute extents aligned on selected raster layer
+ 无法计算所选栅格图层的对齐范围
+
+
+ Please specify valid extent coordinates
+ 请指定有效范围内的坐标
+
+
+ Please specify output shapefile
+ 请指定输出shape文件
+
+
+ Invalid extent coordinates entered
+ 输入的坐标范围无效
+
+
+ Random selection
+ 随机选择
+
+
+ No input shapefile specified
+ 未指定输入shape文件
+
+
+ Regular points
+ 正则点
+
+
+ Please specify input layer
+ 请指定输入图层
+
+
+ Please properly specify extent coordinates
+ 请指定适当的范围坐标
+
+
+ Mean coordinates
+ 平均坐标
+
+
+ Standard distance
+ 标准距离
+
+
+ (Optional) Weight field
+ （可选）权重字段
+
+
+ (Optional) Unique ID field
+ （可选）唯一标识符字段
+
+
+ Coordinate statistics
+ 坐标统计
+
+
+ No input vector layer specified
+ 未指定输入矢量图层
+
+
+ There were %d vertices in original dataset which
+were reduced to %d vertices after simplification
+ 原始数据集中有%d个顶点，简化后剩余%d个
+
+
+ Processing of the following layers/files ended with error:<br><br>
+ 处理以下图层/文件时结果出了错误：<br><br>
+
+
+ Join attributes by location
+ 按位置连接属性
+
+
+ Please specify target vector layer
+ 请指定目标矢量图层
+
+
+ Please specify join vector layer
+ 请指定要连接的矢量图层
+
+
+ Please specify at least one summary statistic
+ 请指定至少一个摘要统计
+
+
+ CRS warning!
+ 坐标参照系警告！
+
+
+ Warning: Input layers have non-matching CRS.
+This may cause unexpected results.
+ 警告：输入图层含有不匹配的坐标参照系。
+这可能会导致发生不可预料的结果。
+
+
+ Summary field
+ 摘要字段
+
+
+ Error deleting shapefile
+ 删除shape文件时出错
+
+
+ Sum line lengths
+ 计算线条总长
+
+
+ Sum Line Lengths In Polyons
+ 计算多边形内线条总长
+
+
+ Please specify input polygon vector layer
+ 请指定输入多边形矢量图层
+
+
+ Please specify input line vector layer
+ 请指定输入线条矢量图层
+
+
+ Please specify output length field
+ 请指定输出长度字段
+
+
+ length field
+ 长度字段
+
+
+ Can't delete existing shapefile
+%s
+ 无法删除已有的shape文件
+%s
+
+
+ Split vector layer
+ 分割矢量图层
+
+
+ Cancel
+ 取消
+
+
+ Close
+ 关闭
+
+
+ Count Points in Polygon
+ 计算多边形内点的数目
+
+
+ Count Points In Polygon
+ 计算多边形内点的数目
+
+
+ Please specify input point vector layer
+ 请指定输入点矢量图层
+
+
+ Please specify output count field
+ 请指定输出计数字段
+
+
+ Random selection within subsets
+ 子集内随机选择
+
+
+ Can't delete file %s
+ 无法删除文件%s
+
+
+ Error loading output shapefile:
+%s
+ 载入以下输出shape文件时出错：
+%s
+
+
+ Created output shapefile:
+%s
+
+Would you like to add the new layer to the TOC?
+ 已创建输出shape文件：
+%s
+
+要将新图层添加到地图视图中吗？
+
+
+ Please specify input vector layer
+ 请指定输入的矢量图层
+
+
+ Please specify an input field
+ 请指定一个输入字段
+
+
+ Defined Projection For:
+%s.shp
+ 已为以下文件定义了投影：
+%s.shp
+
+
+ Random Points
+ 随机点
+
+
+ No input layer specified
+ 未指定输入图层
+
+
+ unstratified
+ 不分层
+
+
+ stratified
+ 分层
+
+
+ density
+ 密实化
+
+
+ field
+ 字段
+
+
+ Unknown layer type...
+ 未知的图层类型...
+
+
+ Selected features: %s
+ 选中的要素：%s
+
+
+ Commit error:
+%s
+ 提交时出错：
+%s
+
+
+ Could not replace geometry of feature with id %s
+ 无法以标识符%s替换要素的几何图形
+
+
+ Could not eliminate features with these ids:
+%s
+ 无法清除具有如下标识符的要素：
+%s
+
+
+ Created output shapefile:
+%s
+ 已创建输出shape文件：
+%s
+
+
+ Line intersections
+ 线条相交
+
+
+ Please specify input line layer
+ 请指定一个输入线条图层
+
+
+ Please specify line intersect layer
+ 请指定线条相交的图层
+
+
+ Created output shapefiles in folder:
+%s
+ 已在目录中创建了输出shape文件：
+%s
+
+
+ Please specify input unique ID field
+ 请指定输入唯一标识符字段
+
+
+ Please specify intersect unique ID field
+ 请指定相交唯一标识符字段
+
+
+ Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
+
+
+ Distance matrix
+ 距离矩阵
+
+
+ Create Point Distance Matrix
+ 创建点距离矩阵
+
+
+ Please specify input point layer
+ 请指定一个输入点图层
+
+
+ Please specify output file
+ 请指定输出文件
+
+
+ Please specify target point layer
+ 请指定目标点图层
+
+
+ Please specify target unique ID field
+ 请指定目标唯一标识符字段
+
+
+ Created output matrix:
+
+ 已创建输出矩阵：
+
+
+ Finished
+ 完成
+
+
+ Processing completed.
+ 处理结束。
+
+
+ Select directory with shapefiles to merge
+ 选择包含要合并的shape文件的目录
+
+
+ No shapefiles found
+ 未找到shape文件
+
+
+ There are no shapefiles in this directory. Please select another one.
+ 该目录内没有shape文件。请选择其他目录。
+
+
+ Input files
+ 输入文件
+
+
+ No output file
+ 没有输出文件
+
+
+ Please specify output file.
+ 请指定输出文件。
+
+
+ There are no shapefiles with the given geometry type. Please select an available geometry type.
+ shape文件不含给定的几何类型。请选择一个可用的几何类型。
+
+
+ Delete error
+ 删除错误
+
+
+ Merging
+ 正在合并
+
+
+ Define current projection
+ 定义当前投影
+
+
+ Missing or invalid CRS
+ 坐标参照系缺失或无效
+
+
+ Please specify spatial reference system
+ 请指定空间参考系统
+
+
+ Cannot define projection for PostGIS data...yet!
+ 还不能为PostGIS数据定义投影！
+
+
+ Identical output spatial reference system chosen
+
+Are you sure you want to proceed?
+ 选择了相同的输出空间参考系统
+
+你是否确定要继续？
+
+
+ Output spatial reference system is not valid
+ 输出空间参考系统无效
+
+
+ Please select the projection system that defines the current layer.
+ 请选择当前图层的投影系统。
+
+
+ Layer CRS information will be updated to the selected CRS.
+ 图层的坐标参照系信息将被更新为此处选中的坐标参照系。
+
+
+ Export to new projection
+ 导出到新投影
+
+
+ No Valid CRS selected
+ 未选择可用的坐标参照系
+
+
+ Densify geometries
+ 密实化几何图形
+
+
+ Vertices to add
+ 要添加的顶点
+
+
+ Warning
+ 警告
+
+
+ Please specify an input layer
+
+
+ Simplify results
+ 简化结果
+
+
+ Error
+ 错误
+
+
+ creating new selection
+ 新建选择
+
+
+ adding to current selection
+ 正在添加到当前选择里面
+
+
+ removing from current selection
+ 从当前选择里面移除
+
+
+ Select by location
+
+
+ Select features in:
+ 选择要素于：
+
+
+ that intersect features in:
+ 与要素相交于：
+
+
+ Modify current selection by:
+ 修改当前选择由：
+
+
+ Use selected features only
仅使用选中的要素
- Merge shapefiles
- 合并shape文件
+ Please specify select layer
+ 请指定选择图层
- Select by layers in the folder
- 按目录中的图层选择
+ Eliminate
+ 清除
- Shapefile type
- Shape文件类型
+ No selection in input layer
+ 输入图层中未作选择
- Polygon
- 多边形
+ Error creating output file
+ 创建输出文件时出错
- Line
- 线条
+ Could not delete features
+ 无法删除要素
- Point
- 点
-
-
- Input directory
- 输入目录
-
-
- Add result to map canvas
- 结果添加到地图视图中
-
-
- Simplify geometries
- 简化几何图形
-
-
- Input line or polygon layer
- 输入线条或多边形图层
-
-
- Simplify tolerance
- 简化容差
-
-
- Save to new file
- 保存到新文件
-
-
- Add result to canvas
- 结果添加到视图中
-
-
- Build spatial index
- 构建空间索引
-
-
- Select files from disk
- 从磁盘中选择文件
-
-
- Select files...
- 选择文件...
-
-
- Select all
- 全选
-
-
- Select none
- 不选
-
-
- Clear list
- 清除列表
-
-
-
- DlgAbout
-
- about:blank
- about:blank
+ Could not add features
+ 无法添加要素
DlgAddGeometryColumn
-
- Dialog
- 对话框
-
-
- Name
- 名称
-
-
- Type
- 类型
-
-
- POINT
- 点
-
-
- POLYGON
- 多边形
-
-
- MULTIPOINT
- 点集
-
-
- MULTIPOLYGON
- 多边形集
-
-
- GEOMETRYCOLLECTION
- 几何图形集
-
-
- Dimensions
- 维度
-
-
- SRID
- 空间参考标识符
-
-
- -1
- -1
-
Sorry
不好意思
@@ -2686,40 +2462,36 @@ were reduced to %2 vertices after simplification
Autofill settings
-
Autofill mode
-
Do not autofill
-
Fill with numbers
-
Fill with parameter values
-
Parameter to use
-
DlgConfig
-
- SEXTANTE options
- SEXTANTE工具箱
-
Processing options
@@ -2730,48 +2502,9 @@ were reduced to %2 vertices after simplification
Enter setting name to filter list
请输入设置名称
-
- Setting
- 设置
-
-
- Value
- 值
-
-
-
- DlgCreateConstraint
-
- Add constraint
- 添加限制
-
-
- Column
- 列
-
-
- Primary key
- 主键
-
-
- Unique
- 唯一
-
DlgCreateIndex
-
- Create index
- 创建索引
-
-
- Column
- 列
-
-
- Name
- 名称
-
Error
错误
@@ -2783,78 +2516,6 @@ were reduced to %2 vertices after simplification
DlgCreateTable
-
- Create Table
- 创建表格
-
-
- Schema
- 模式
-
-
- Name
- 名称
-
-
- Add field
- 添加字段
-
-
- Delete field
- 删除字段
-
-
- Up
- 向上
-
-
- Down
- 向下
-
-
- Primary key
- 主键
-
-
- Create geometry column
- 创建几何字段
-
-
- POINT
- 点
-
-
- POLYGON
- 多边形
-
-
- MULTIPOINT
- 点集
-
-
- MULTIPOLYGON
- 多边形集
-
-
- GEOMETRYCOLLECTION
- 几何图形集
-
-
- Dimensions
- 维度
-
-
- SRID
- 空间参考标识符
-
-
- -1
- -1
-
-
- Create spatial index
- 创建空间索引
-
&Create
创建(&C)
@@ -2904,25 +2565,6 @@ were reduced to %2 vertices after simplification
一切都还行
-
- DlgDbError
-
- Database Error
- 数据库错误
-
-
- An error occured:
- 发生了一个错误：
-
-
- An error occured when executing a query:
- 执行查询时发生了一个错误：
-
-
- Query:
- 查询：
-
-
DlgExportVector
@@ -2962,30 +2604,6 @@ were reduced to %2 vertices after simplification
DlgFieldProperties
-
- Field properties
- 字段属性
-
-
- Name
- 名称
-
-
- Type
- 类型
-
-
- Can be NULL
- 可为空
-
-
- Default value
- 默认值
-
-
- Length
- 长度
-
Sorry
不好意思
@@ -3004,12 +2622,12 @@ were reduced to %2 vertices after simplification
Get scripts and models
-
about:blank
- about:blank
+
@@ -3045,66 +2663,6 @@ were reduced to %2 vertices after simplification
DlgImportVector
-
- Import vector layer
- 导入矢量图层
-
-
- Schema:
- 模式：
-
-
- Table:
- 表格：
-
-
- Action
- 动作
-
-
- Create new table
- 新建表格
-
-
- Drop existing one
- 删除已有的表格
-
-
- Append data into table
- 将数据追加到表格
-
-
- Options
- 选项
-
-
- Primary key:
- 主键：
-
-
- Geometry column:
- 几何字段：
-
-
- Source SRID:
- 源空间参考标识符：
-
-
- Target SRID:
- 目标空间参考标识符：
-
-
- Encoding:
- 编码：
-
-
- Create single-part geometries instead of multi-part
- 创建单部件几何图形，而不是多部件几何图形
-
-
- Create spatial index
- 创建空间索引
-
Choose the file to import
选择要导入的文件
@@ -3142,10 +2700,6 @@ were reduced to %2 vertices after simplification
DlgModeler
-
- SEXTANTE modeler
- SEXTANTE建模
-
Processing modeler
@@ -3154,7 +2708,7 @@ were reduced to %2 vertices after simplification
Open model
-
...
- ...
+
Save
- 保存
+
Save as...
-
Export as image
- 导出为位图
+
Edit model help
- 编辑模型帮助
+
Run model
-
Multiple selection
-
@@ -3230,17 +2784,17 @@ were reduced to %2 vertices after simplification
Enter number or expression
-
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -3248,17 +2802,17 @@ were reduced to %2 vertices after simplification
Dialog
- 对话框
+
Output
- 输出
+
Style
- 样式
+
@@ -3279,12 +2833,12 @@ were reduced to %2 vertices after simplification
Script editor
-
Save
- 保存
+
...
- ...
+
Save as...
-
Edit script help
-
Run algorithm
-
Cut
- 剪切
+
Copy
- 复制
+
Paste
- 粘帖
+
Undo
- 撤销
+
Redo
- 重做
+
DlgSqlWindow
-
- SQL window
- SQL窗口
-
-
- SQL query:
- SQL查询：
-
-
- &Execute (F5)
- 执行(&E) (F5)
-
-
- F5
- F5
-
-
- Result:
- 结果：
-
-
- Load as new layer
- 导入为新图层
-
-
- Column with unique
-integer values
- 包含不重复整型数值的列
-
-
- Geometry column
- 几何字段
-
-
- Retrieve
-columns
- 获取列
-
-
- Layer name (prefix)
- 图层名称（前缀）
-
-
- Type
- 类型
-
-
- Vector
- 矢量
-
-
- Raster
- 栅格
-
-
- Load now!
- 立刻载入！
-
%d rows, %.1f seconds
%d行，% 1f 秒
@@ -3415,115 +2911,8 @@ geometry column - column with unique integer values
几何字段列 - 包含不重复整型数值的列
-
- DlgSymbolV2Properties
-
- Symbol properties
- 符号属性
-
-
- Symbol layer properties
- 符号图层属性
-
-
- This symbol layer doesn't have GUI for settings.
- 该符号图层没有图形用户界面设置选项。
-
-
- Symbol preview
- 符号预览
-
-
- Symbol layer type
- 符号图层类型
-
-
- Symbol layers
- 符号图层
-
-
- Add symbol layer
- 添加符号图层
-
-
- Remove symbol layer
- 移除符号图层
-
-
- Lock layer's color
- 锁定图层颜色
-
-
- Move up
- 上移
-
-
- Move down
- 下移
-
-
DlgTableProperties
-
- Table properties
- 表格属性
-
-
- Columns
- 列
-
-
- Table columns:
- 表格中的列（字段）：
-
-
- Add column
- 添加字段
-
-
- Add geometry column
- 添加几何字段
-
-
- Edit column
- 编辑字段
-
-
- Delete column
- 删除字段
-
-
- Constraints
- 限制
-
-
- Add primary key / unique
- 添加主键/唯一键
-
-
- Delete constraint
- 删除限制
-
-
- Indexes
- 索引
-
-
- Indexes defined for this table:
- 该表格定义的索引：
-
-
- Add index
- 添加索引
-
-
- Add spatial index
- 添加空间索引
-
-
- Delete index
- 删除索引
-
Sorry
不好意思
@@ -3633,130 +3022,116 @@ geometry column - column with unique integer values
将被执行的SQL语句：
-
- EditRScriptDialog
-
- I/O error
- 输入/输出错误
-
-
- Unable to save edits. Reason:
- %1
- 无法保存编辑。原因：
- %1
-
-
-
- EditScriptDialog
-
- I/O error
- 输入/输出错误
-
-
- Unable to save edits. Reason:
- %1
- 无法保存编辑。原因：
- %1
-
-
FieldsCalculator
Field calculator
- 字段计算器
+
Create a new field
- 新建字段
+
Output field name
- 输出字段名称
+
Output field type
- 输出字段类型
+
Output field width
- 输出字段宽度
+
Width of complete output. For example 123,456 means 6 as field width.
- 完整输出的宽度。例如123,456意味着字段宽度为6。
+
Precision
- 精度
+
Input layer
- 输入图层
+
Update existing field
- 更新现有的字段
+
Output file
- 输出文件
+
...
- ...
+
FieldsCalculatorDialog
[Save to temporary file]
-
Save file
- 保存文件
+
Unable to execute algorithm
-
Wrong or missing parameter values
-
FileDirectorySelector
...
- ...
+
Select directory
-
Select file
-
All files (*.*)
-
GdalTools
+
+ &Input directory
+ 输入目录(&I)
+
+
+ &Output directory
+ 输出目录(&O)
+
+
+ The selected file is not a supported OGR format
+ 选中的文件不是受支持的OGR格式文件
+
The process failed to start. Either the invoked program is missing, or you may have insufficient permissions to invoke the program.
进程启动失败。可能被调用的程序缺失，也可能是你没有足够的权限来调用程序。
@@ -3770,12 +3145,18 @@ geometry column - column with unique integer values
发生了一个未知错误。
- The selected file is not a supported OGR format
- 选中的文件不是受支持的OGR格式文件
+ Plugin error
+ 插件错误
- Quantum GIS version detected:
- 检测到Quantum GIS版本：
+ Unable to load {0} plugin.
+The required "{1}" module is missing.
+Install it and try again.
+ 无法加载{0}插件，因为找不到需要的“{1}”模型。请尝试着重新安装加载该插件。
+
+
+ QGIS version detected:
+ 检测到Quantum GIS版本：
This version of Gdal Tools requires at least QGIS version 1.0.0
@@ -3784,73 +3165,17 @@ Plugin will not be enabled.
不能启用插件。
- Builds a VRT from a list of datasets
- 由一系列的数据集构建虚拟栅格
+ Projections
+ 投影
- Contour
- 等值线
-
-
- Builds vector contour lines from a DEM
- 由数字高程模型（DEM）生成矢量等高线
-
-
- Burns vector geometries into a raster
- 将矢量几何图形转换成一个栅格
-
-
- Produces a polygon feature layer from a raster
- 从栅格生成一个多边形要素图层
-
-
- Merge
- 合并
-
-
- Build a quick mosaic from a set of images
- 由一组位图影像构建快速拼接（quick mosaic）
-
-
- Sieve
- 过滤分析
-
-
- Removes small raster polygons
- 移除小栅格多边形
-
-
- Produces a raster proximity map
- 生成栅格距离图
-
-
- Near black
- 边框转换
-
-
- Convert nearly black/white borders to exact value
- 将接近黑色或白色的边界转换为精确的颜色值
+ Warp (Reproject)
+ 变形（重新投影）
Warp an image into a new coordinate system
将位图变形，重新投影到一个新的坐标系中
-
- Create raster from the scattered data
- 由离散数据创建栅格
-
-
- Converts raster data between different formats
- 转换各种不同格式的栅格数据
-
-
- Information
- 信息
-
-
- Lists information about raster dataset
- 列出栅格数据集的相关信息
-
Assign projection
指定投影
@@ -3860,50 +3185,40 @@ Plugin will not be enabled.
为栅格添加投影信息
- Build Virtual Raster (Catalog)
- 构建虚拟栅格（目录）
+ Extract projection
+ 提取投影
+
+
+ Extract projection information from raster(s)
+ 提取栅格的投影信息
+
+
+ Conversion
+ 转换
Rasterize (Vector to raster)
矢量栅格化（矢量转栅格）
+
+ Burns vector geometries into a raster
+ 将矢量几何图形转换成一个栅格
+
Polygonize (Raster to vector)
栅格矢量化（栅格转矢量）
- Proximity (Raster distance)
- 生成栅格距离图（计算栅格中心点像元与临近像元间的距离作为结果像元值）
-
-
- Warp (Reproject)
- 变形（重新投影）
-
-
- Grid (Interpolation)
- 网格插值（从离散数据点创建一个规则栅格图像）
+ Produces a polygon feature layer from a raster
+ 从栅格生成一个多边形要素图层
Translate (Convert format)
翻译（格式转换）
- Build overviews (Pyramids)
- 构建概貌（金字塔）
-
-
- Builds or rebuilds overview images
- 构建或重新构建概貌图
-
-
- Clipper
- 裁剪器
-
-
- Unable to load {0} plugin.
-The required "{1}" module is missing.
-Install it and try again.
- 无法加载{0}插件，因为找不到需要的“{1}”模型。请尝试着重新安装加载该插件。
+ Converts raster data between different formats
+ 转换各种不同格式的栅格数据
RGB to PCT
@@ -3921,58 +3236,42 @@ Install it and try again.
Convert an 8bit paletted image to 24bit RGB
8位调色板位图转换为24位RGB位图
-
- Tile index
- 瓦片索引
-
-
- Build a shapefile as a raster tileindex
- 创建矢量文件作为栅格瓦片索引
-
-
- DEM (Terrain models)
- 数字高程模型（DEM，地形模型）
-
-
- Plugin error
- 插件错误
-
-
- Unable to load %1 plugin.
-The required "%2" module is missing.
-Install it and try again.
- 无法载入%1插件。
-所依赖的“%2”模块缺失。
-请安装插件依赖的模块再重试。
-
-
- QGIS version detected:
- 检测到Quantum GIS版本：
-
-
- Projections
- 投影
-
-
- Extract projection
- 提取投影
-
-
- Extract projection information from raster(s)
- 提取栅格的投影信息
-
-
- Conversion
- 转换
-
Extraction
提取
+
+ Contour
+ 等值线
+
+
+ Builds vector contour lines from a DEM
+ 由数字高程模型（DEM）生成矢量等高线
+
+
+ Clipper
+ 裁剪器
+
Analysis
分析
+
+ Sieve
+ 过滤分析
+
+
+ Removes small raster polygons
+ 移除小栅格多边形
+
+
+ Near black
+ 边框转换
+
+
+ Convert nearly black/white borders to exact value
+ 将接近黑色或白色的边界转换为精确的颜色值
+
Fill nodata
填充无数据
@@ -3981,6 +3280,26 @@ Install it and try again.
Fill raster regions by interpolation from edges
从边缘插值填充栅格区域
+
+ Proximity (Raster distance)
+ 生成栅格距离图（计算栅格中心点像元与临近像元间的距离作为结果像元值）
+
+
+ Produces a raster proximity map
+ 生成栅格距离图
+
+
+ Grid (Interpolation)
+ 网格插值（从离散数据点创建一个规则栅格图像）
+
+
+ Create raster from the scattered data
+ 由离散数据创建栅格
+
+
+ DEM (Terrain models)
+ 数字高程模型（DEM，地形模型）
+
Tool to analyze and visualize DEMs
数字高程模型（DEM）分析及可视化工具
@@ -3989,6 +3308,46 @@ Install it and try again.
Miscellaneous
杂项
+
+ Build Virtual Raster (Catalog)
+ 构建虚拟栅格（目录）
+
+
+ Builds a VRT from a list of datasets
+ 由一系列的数据集构建虚拟栅格
+
+
+ Merge
+ 合并
+
+
+ Build a quick mosaic from a set of images
+ 由一组位图影像构建快速拼接（quick mosaic）
+
+
+ Information
+ 信息
+
+
+ Lists information about raster dataset
+ 列出栅格数据集的相关信息
+
+
+ Build overviews (Pyramids)
+ 构建概貌（金字塔）
+
+
+ Builds or rebuilds overview images
+ 构建或重新构建概貌图
+
+
+ Tile index
+ 瓦片索引
+
+
+ Build a shapefile as a raster tileindex
+ 创建矢量文件作为栅格瓦片索引
+
GdalTools settings
Gdal工具设置
@@ -3997,14 +3356,6 @@ Install it and try again.
Various settings for Gdal Tools
Gdal工具的各种设置
-
- &Input directory
- 输入目录(&I)
-
-
- &Output directory
- 输出目录(&O)
-
GdalToolsAboutDialog
@@ -4028,7 +3379,7 @@ Install it and try again.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -4063,7 +3414,7 @@ p, li { white-space: pre-wrap; }
No input files to process.
-
The following files were not created:
@@ -4071,12 +3422,6 @@ p, li { white-space: pre-wrap; }
以下文件未创建：
{0}
-
- The following files were not created:
-%1
- 以下文件没有被创建：
-%1
-
GdalToolsBaseDialog
@@ -4090,10 +3435,6 @@ Do you want terminate it anyway?
命令仍在执行中。
要终止吗？
-
- Invalid parameters.
- 无效的参数。
-
GdalToolsBasePluginWidget
@@ -4117,10 +3458,6 @@ Do you want terminate it anyway?
%s not created.
没有创建%s。
-
- %1 not created.
- 没有创建%1。
-
GdalToolsDialog
@@ -4146,242 +3483,6 @@ Do you want terminate it anyway?
Reset
重置
-
- Select the input file for Proximity
- 选择要生成栅格距离图的输入文件
-
-
- Select the raster file to save the results to
- 选择一个栅格文件以将结果保存到其中
-
-
- Select the input file for Near Black
- 选择要作边框转换的输入文件
-
-
- Select the input file for Grid
- 选择网格插值的输入文件
-
-
- Select the input directory with files to Merge
- 选择包含要合并的文件的输入目录
-
-
- Warning
- 警告
-
-
- Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
- 警告：子目录中所有栅格的坐标参照系信息将被重写。你确定要这样做吗？
-
-
- Select the file to analyse
- 选择要分析的文件
-
-
- Select the input directory with files to Assign projection
- 选择包含要指定投影的文件的输入目录
-
-
- Finished
- 完成
-
-
- Processing completed.
- 处理结束。
-
-
- %1 not created.
- 没有创建%1。
-
-
- Assign projection
- 指定投影
-
-
- This raster already found in map canvas
- 地图视图中已有该栅格
-
-
- Select the files for VRT
- 选择用于构建虚拟栅格的文件
-
-
- Select where to save the VRT
- 选择虚拟栅格的保存位置
-
-
- VRT (*.vrt)
- 虚拟栅格文件(*.vrt)
-
-
- Select the input file for Warp
- 选择要变形的输入文件
-
-
- Select the mask file
- 选择掩膜文件
-
-
- Select the input directory with files to Warp
- 选择包含要变形的文件的输入目录
-
-
- [select levels]
- [选择级别]
-
-
- Select the output directory to save the results to
- 选择输出目录以将结果保存到其中
-
-
- Select the input file for Sieve
- 选择要过滤分析的输入文件
-
-
- Select the files to Merge
- 选择要合并的文件
-
-
- Select where to save the Merge output
- 选择合并结果输出的保存位置
-
-
- Select the input file for convert
- 选择要转换的输入文件
-
-
- Select the input directory with files for convert
- 选择包含要转换的文件的输入目录
-
-
- Select the file for DEM
- 选择用于数字高程模型处理的文件
-
-
- Select the color configuration file
- 选择颜色设置文件
-
-
- Select the input file for Polygonize
- 选择要矢量化的输入文件
-
-
- Select where to save the Polygonize output
- 选择矢量化输出的保存位置
-
-
- Select the input file for Contour
- 选择要绘制等值线的输入文件
-
-
- Select where to save the Contour output
- 选择等值线输出的保存位置
-
-
- Select the input file for Translate
- 选择要翻译的输入文件
-
-
- {0} not created.
- {0}未创建.
-
-
- Select the input directory with files to Translate
- 选择包含要翻译的文件的输入目录
-
-
- Translate - srcwin
- 格式转换 - srcwin
-
-
- Image coordinates (pixels) must be integer numbers.
- 位图坐标（像素）必须是整数。
-
-
- Translate - prjwin
- 格式转换 - prjwin
-
-
- Image coordinates (geographic) must be numbers.
- 位图坐标（地理）必须是数字。
-
-
- Output size or resolution required
- 要求设置输出大小或分辨率
-
-
- The output file doesn't exist. You must set up the output size or resolution to create it.
- 输出文件不存在。你必须设置输出大小或分辨率来创建它。
-
-
- Select the files to analyse
- 选择要分析的文件
-
-
- Output size required
- 要求设置输出大小
-
-
- The output file doesn't exist. You must set up the output size to create it.
- 输出文件不存在。你必须设置输出大小来创建它。
-
-
- Convert paletted image to RGB
- 调色板位图转换为RGB位图
-
-
- Select the input file for Rasterize
- 选择要栅格化的输入文件
-
-
- Copy
- 复制
-
-
- Copy all
- 全部复制
-
-
- Select the input directory with files for VRT
- 选择输入目录，这个目录包含用于构建虚拟栅格的文件
-
-
- Select the input directory with raster files
- 选择包含栅格文件的输入目录
-
-
- Select where to save the TileIndex output
- 选择瓦片索引结果输出存储位置
-
-
- Error retrieving the extent
- 获取范围时出错
-
-
- GDAL was unable to retrieve the extent from any file.
-The "Use intersected extent" option will be unchecked.
- GDAL无法从任何文件中检索范围。
-“使用相交范围”选项将被取消勾选。
-
-
- Empty extent
- 范围为空
-
-
- The computed extent is empty.
-Disable the "Use intersected extent" option to have a nonempty output.
- 计算出来的范围是空的。
-禁用“使用相交范围”选项以获得非空输出。
-
-
- Select the input file
- 选择输入文件
-
-
- Select the input directory with files
- 选择包含文件的输入目录
-
Extract projection
@@ -4407,6 +3508,226 @@ Disable the "Use intersected extent" option to have a nonempty output.
Create also prj file
同时生成prj文件
+
+ Select the file for DEM
+ 选择用于数字高程模型处理的文件
+
+
+ Select the raster file to save the results to
+ 选择一个栅格文件以将结果保存到其中
+
+
+ Select the color configuration file
+ 选择颜色设置文件
+
+
+ Select the input file for Grid
+ 选择网格插值的输入文件
+
+
+ Select the input file for Rasterize
+ 选择要栅格化的输入文件
+
+
+ Select the input file for Sieve
+ 选择要过滤分析的输入文件
+
+
+ Select the input file for Warp
+ 选择要变形的输入文件
+
+
+ Select the mask file
+ 选择掩膜文件
+
+
+ Select the input directory with files to Warp
+ 选择包含要变形的文件的输入目录
+
+
+ Select the output directory to save the results to
+ 选择输出目录以将结果保存到其中
+
+
+ Output size or resolution required
+ 要求设置输出大小或分辨率
+
+
+ The output file doesn't exist. You must set up the output size or resolution to create it.
+ 输出文件不存在。你必须设置输出大小或分辨率来创建它。
+
+
+ Select the input file for Translate
+ 选择要翻译的输入文件
+
+
+ Select the input directory with files to Translate
+ 选择包含要翻译的文件的输入目录
+
+
+ Translate - srcwin
+ 格式转换 - srcwin
+
+
+ Image coordinates (pixels) must be integer numbers.
+ 位图坐标（像素）必须是整数。
+
+
+ Translate - prjwin
+ 格式转换 - prjwin
+
+
+ Image coordinates (geographic) must be numbers.
+ 位图坐标（地理）必须是数字。
+
+
+ Select the input directory with raster files
+ 选择包含栅格文件的输入目录
+
+
+ Select where to save the TileIndex output
+ 选择瓦片索引结果输出存储位置
+
+
+ Convert paletted image to RGB
+ 调色板位图转换为RGB位图
+
+
+ Select the input file for convert
+ 选择要转换的输入文件
+
+
+ Select the input directory with files for convert
+ 选择包含要转换的文件的输入目录
+
+
+ Select the file to analyse
+ 选择要分析的文件
+
+
+ Select the input directory with files to Assign projection
+ 选择包含要指定投影的文件的输入目录
+
+
+ Copy
+ 复制
+
+
+ Copy all
+ 全部复制
+
+
+ Select the input file for Polygonize
+ 选择要矢量化的输入文件
+
+
+ Select the files for VRT
+ 选择用于构建虚拟栅格的文件
+
+
+ Select where to save the VRT
+ 选择虚拟栅格的保存位置
+
+
+ VRT (*.vrt)
+ 虚拟栅格文件(*.vrt)
+
+
+ Select the input directory with files for VRT
+ 选择输入目录，这个目录包含用于构建虚拟栅格的文件
+
+
+ Select the input file for Near Black
+ 选择要作边框转换的输入文件
+
+
+ Select the input file
+ 选择输入文件
+
+
+ Select the input directory with files
+ 选择包含文件的输入目录
+
+
+ Select the files to Merge
+ 选择要合并的文件
+
+
+ Error retrieving the extent
+ 获取范围时出错
+
+
+ GDAL was unable to retrieve the extent from any file.
+The "Use intersected extent" option will be unchecked.
+ GDAL无法从任何文件中检索范围。
+“使用相交范围”选项将被取消勾选。
+
+
+ Empty extent
+ 范围为空
+
+
+ The computed extent is empty.
+Disable the "Use intersected extent" option to have a nonempty output.
+ 计算出来的范围是空的。
+禁用“使用相交范围”选项以获得非空输出。
+
+
+ Select where to save the Merge output
+ 选择合并结果输出的保存位置
+
+
+ Select the input directory with files to Merge
+ 选择包含要合并的文件的输入目录
+
+
+ {0} not created.
+ {0}未创建.
+
+
+ Select the files to analyse
+ 选择要分析的文件
+
+
+ Select the input file for Contour
+ 选择要绘制等值线的输入文件
+
+
+ Select where to save the Contour output
+ 选择等值线输出的保存位置
+
+
+ Select the input file for Proximity
+ 选择要生成栅格距离图的输入文件
+
+
+ Warning
+ 警告
+
+
+ Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
+ 警告：子目录中所有栅格的坐标参照系信息将被重写。你确定要这样做吗？
+
+
+ Finished
+ 完成
+
+
+ Processing completed.
+ 处理结束。
+
+
+ Assign projection
+ 指定投影
+
+
+ This raster already found in map canvas
+ 地图视图中已有该栅格
+
+
+ Select where to save the Polygonize output
+ 选择矢量化输出的保存位置
+
GdalToolsExtentSelector
@@ -4520,31 +3841,6 @@ Disable the "Use intersected extent" option to have a nonempty output.
GDAL driver path
GDAL驱动路径
-
- A list of colon-separated (Linux and MacOS) or
-semicolon-separated (Windows) paths to both binaries
-and python executables.
-
-MacOS users usually need to set it to something like
-/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
- 一个到中二进制文件和Python可执行文件的以冒号分隔
-（Linux和MacOS）或分号分隔（Windows）的路径列表。
-
-MacOS用户通常要将其设置为类似
-/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
-的样子
-
-
- A list of colon-separated (Linux and MacOS) or
-semicolon-separated (Windows) paths to python modules.
- 一个到Python可执行文件的以冒号分隔（Linux和MacOS）或
-分号分隔（Windows）的路径列表。
-
-
- Useful to open local GDAL documentation instead of online help
-when pressing on the tool dialog's Help button.
- 当按下工具对话框的“帮助”按钮时，打开本地GDAL文档而不是在线帮助。
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to both binaries
@@ -4585,20 +3881,6 @@ when pressing on the tool dialog's Help button.
GdalToolsWidget
-
- Select...
- 选择...
-
-
- &Input files
- 输入文件(&I)
-
Build Virtual Raster (Catalog)
@@ -4615,6 +3897,20 @@ when pressing on the tool dialog's Help button.
Choose input directory instead of files
设置输入为目录而非文件
+
+ &Input files
+ 输入文件(&I)
+
+
+ Recurse subdirectories
+ 递归子目录
+
&No data value
无数据值(&N)
+
+ &Input file (raster)
+ 输入栅格文件(&I)
+
Clipping mode
@@ -4700,35 +4003,11 @@ when pressing on the tool dialog's Help button.
Create an output alpha band
创建一个输出alpha波段
-
- 1
- 1
-
-
- 2
- 2
-
-
- Grab pseudocolor table from the first image
- 从第一个位图抓取伪彩色表
-
Contour
等值线
-
- &Input file (raster)
- 输入栅格文件(&I)
-
-
- &Output directory for contour lines (shapefile)
- 等值线（shape文件）输出目录(&O)
-
&Output file for contour lines (vector)
@@ -4792,165 +4071,6 @@ when pressing on the tool dialog's Help button.
Band to convert
要转换的波段数
-
- &Z Field
- 竖坐标字段(&Z)
-
-
- &Algorithm
- 算法(&A)
-
-
- Inverse distance to a power
- 距离倒数乘方法（Inverse distance to a power）
-
-
- Moving average
- 滑动平均法（Moving average）
-
-
- Nearest neighbor
- 近邻取样法（Nearest neighbor）
-
-
- Data metrics
- 数据度规法（Data metrics）
-
-
- Power
- 幂
-
-
- Smoothing
- 平滑参数
-
-
- Radius1
- 半径一
-
-
- Radius2
- 半径二
-
-
- Angle
- 角度
-
-
- Width
- 宽度
-
-
- Height
- 高度
-
-
- Max points
- 点的最大搜索数目
-
-
- Grid (Interpolation)
- 网格插值（从离散数据点创建一个规则栅格图像）
-
-
- Min points
- 点的最小搜索数目
-
-
- No data
- 无数据值
-
-
- Metrics
- 度规
-
-
- Minimum
- 最小值
-
-
- Maximum
- 最大值
-
-
- Range
- 范围
-
-
- Info
- 信息
-
-
- Raster info
- 栅格信息
-
-
- Suppress GCP printing
- 抑制地面控制点列表打印
-
-
- Suppress metadata printing
- 抑制元数据打印
-
-
- Merge
- 合并
-
-
- Layer stack
- 图层堆叠 - 每个输入文件放到单独的堆叠波段
-
-
- Use intersected extent
- 使用相交的范围
-
DEM (Terrain models)
@@ -4971,6 +4091,12 @@ when pressing on the tool dialog's Help button.
Compute &edges
计算栅格边界数据和无数据值附近的数据(&E)
+
+ Use Zevenbergen&&Thorne formula (instead of the Horn's one)
+ 使用Zevenbergen && Thorne方程取代Horn方程
+（Horn方程粗糙地形表现较好，而前者反之）
+
&Mode
@@ -5011,12 +4137,6 @@ when pressing on the tool dialog's Help button.
Roughness
粗糙度
-
- Use Zevenbergen&&Thorne formula (instead of the Horn's one)
- 使用Zevenbergen && Thorne方程取代Horn方程
-（Horn方程粗糙地形表现较好，而前者反之）
-
Mode Options
@@ -5090,6 +4210,218 @@ when pressing on the tool dialog's Help button.
&Creation Options
创建选项(&C)
+
+ Fill Nodata
+ 填充无数据
+
+
+ &Input Layer
+ 输入图层(&I)
+
+
+ Output format
+ 输出格式
+
+
+ Search distance
+ 最大插值搜索距离（像素）
+
+
+ Smooth iterations
+ 平滑迭代次数
+
+
+ Band to operate on
+ 要操作的波段
+
+
+ Validity mask
+ 有效性掩膜
+
+
+ Do not use the default validity mask
+ 不使用默认的有效性掩膜
+
+
+ Grid (Interpolation)
+ 网格插值（从离散数据点创建一个规则栅格图像）
+
+
+ &Z Field
+ 竖坐标字段(&Z)
+
+
+ &Algorithm
+ 算法(&A)
+
+
+ Inverse distance to a power
+ 距离倒数乘方法（Inverse distance to a power）
+
+
+ Moving average
+ 滑动平均法（Moving average）
+
+
+ Nearest neighbor
+ 近邻取样法（Nearest neighbor）
+
+
+ Data metrics
+ 数据度规法（Data metrics）
+
+
+ Power
+ 幂
+
+
+ Smoothing
+ 平滑参数
+
+
+ Radius1
+ 半径一
+
+
+ Radius2
+ 半径二
+
+
+ Max points
+ 点的最大搜索数目
+
+
+ Min points
+ 点的最小搜索数目
+
+
+ Angle
+ 角度
+
+
+ No data
+ 无数据值
+
+
+ Metrics
+ 度规
+
+
+ Minimum
+ 最小值
+
+
+ Maximum
+ 最大值
+
+
+ Range
+ 范围
+
+
+ Resize
+ 调整大小
+
+
+ Width
+ 宽度
+
+
+ Height
+ 高度
+
+
+ Info
+ 信息
+
+
+ Raster info
+ 栅格信息
+
+
+ Suppress GCP printing
+ 抑制地面控制点列表打印
+
+
+ Suppress metadata printing
+ 抑制元数据打印
+
+
+ Merge
+ 合并
+
+
+ Layer stack
+ 图层堆叠 - 每个输入文件放到单独的堆叠波段
+
+
+ Use intersected extent
+ 使用相交的范围
+
+
+ Grab pseudocolor table from the first image
+ 从第一个位图抓取伪彩色表
+
Near Black
@@ -5110,38 +4442,6 @@ when pressing on the tool dialog's Help button.
Build overviews (Pyramids)
构建概貌（金字塔）
-
- old
- 旧
-
-
- Resampling method
- 重采样方法
-
-
- nearest
- 近邻
-
-
- average
- 平均
-
-
- gauss
- 高斯
-
-
- cubic
- 立方卷积
-
-
- mode
- 模式
-
-
- new
- 新
-
Remove all overviews.
@@ -5152,44 +4452,6 @@ when pressing on the tool dialog's Help button.
Clean
清理
-
- In order to generate external overview (for GeoTIFF especially).
- 用于生成额外的鹰眼图（特别是GeoTIFF格式）。
-
-
- Open in read-only mode
- 以只读方式打开
-
-
- Create external overviews in TIFF format, compressed using JPEG.
- GeoTIFF格式下生成额外的鹰眼图，使用JPEG压缩算法。
-
-
- Overviews in TIFF format with JPEG compression
- TIFF格式中的鹰眼图使用JPEG压缩
-
-
- For JPEG compressed external overviews,
-the JPEG quality can be set.
- 用于JPEG压缩的额外鹰眼图。
-这里设置JPEG压缩质量。
-
-
- JPEG Quality (1-100)
- JPEG质量（1-100）
-
-
- Alternate overview format using Erdas Imagine format,
-placing the overviews in an associated .aux file
-suitable for direct use with Imagine,ArcGIS, GDAL.
- 另一种可用的鹰眼图格式，采用Erdas Imagine格式，将鹰眼图
-存放在一个关联的.aux文件中，适合Imagine、ArcGIS和GDAL
-直接使用。
-
-
- Use Imagine format (.aux file)
- 使用Imagine格式（.aux文件）
-
Polygonize (Raster to vector)
@@ -5240,12 +4502,12 @@ suitable for direct use with Imagine,ArcGIS, GDAL.
- 直接覆盖（若输入是GeoTiff）
- Recurse subdirectories
- 递归子目录
+ Select...
+ 选择...
Vertical
垂直
-
- New size (required if output file doens't exist)
- 设置大小（如果输出文件尚不存在，则需要指定）
-
Sieve
@@ -5367,12 +4625,63 @@ suitable for direct use with Imagine,ArcGIS, GDAL.
8
8
+
+ Raster tile index
+ 影像瓦片索引
+
+
+ Input directory
+ 输入目录
+
+
+ Output shapefile
+ 输出shape文件
+
+
+ Tile index field
+ 瓦片索引字段
+
+
+ location
+ 位置
+
+
+ Write absolute path
+ 写入绝对路径
+
+
+ Skip files with different projection ref
+ 跳过带有不同投影信息的文件
+
+
+ Translate (Convert format)
+ 翻译（格式转换）
+
+
+ &Target SRS
+ 目标空间参照系统(&T)
+
Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
调整栅格图像大小为源栅格图像大小的百分比。这将相应地改变像素大小/图像分辨率：25%将创建一个栅格图像，其每个像素点的大小是源栅格的4倍。
+
+ Outsize
+ 输出大小
+
%
@@ -5388,64 +4697,12 @@ suitable for direct use with Imagine,ArcGIS, GDAL.
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
将包含1个波段同时具有颜色表的数据集展开成3个波段（RGB）或4个波段（RGBA）的数据集。
适用于JPEG、JPEG2000、MrSID、ECW等不支持颜色索引数据集的输出驱动。
“灰度”（GDAL 1.7.0）可使只包含灰度梯度但同时具有颜色表的数据集展开成一个灰度索引数据集。
-
- Fill Nodata
- 填充无数据
-
-
- &Input Layer
- 输入图层(&I)
-
-
- Search distance
- 最大插值搜索距离（像素）
-
-
- Smooth iterations
- 平滑迭代次数
-
-
- Band to operate on
- 要操作的波段
-
-
- Validity mask
- 有效性掩膜
-
-
- Do not use the default validity mask
- 不使用默认的有效性掩膜
-
-
- Translate (Convert format)
- 翻译（格式转换）
-
-
- &Target SRS
- 目标空间参照系统(&T)
-
-
- Outsize
- 输出大小
-
Expand
@@ -5482,11 +4739,6 @@ Ysize——子窗口纵坐标跨度大小
Srcwin
行列位置取值窗口
-
- Prjwin
- 地理坐标取值窗口
-
+
+ Prjwin
+ 地理坐标取值窗口
+
Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
@@ -5509,10 +4766,19 @@ lry——像素或线条的终止地理纬度坐标
复制子数据集
- Output format
- 输出格式
+ Warp (Reproject)
+ 变形（重新投影）
+
+
+ &Source SRS
+ 源空间参照系统(&S)
+
+
+ &Resampling method
+ 重采样方法(&R)
No data values
无数据值
-
- MB
- MB
-
-
- &Source SRS
- 源空间参照系统(&S)
-
-
- Warp (Reproject)
- 变形（重新投影）
-
-
- &Resampling method
- 重采样方法(&R)
-
&Memory used for caching
缓存大小(&M)
- Resize
- 调整大小
+ MB
+ MB
使用多线程(&u)
- Raster tile index
- 影像瓦片索引
-
-
- Input directory
- 输入目录
-
-
- Output shapefile
- 输出shape文件
-
-
- Tile index field
- 瓦片索引字段
-
-
- location
- 位置
-
-
- Write absolute path
- 写入绝对路径
-
-
- Skip files with different projection ref
- 跳过带有不同投影信息的文件
+ &Output directory for contour lines (shapefile)
+ 等值线（shape文件）输出目录(&O)
@@ -5686,72 +4900,6 @@ lry——像素或线条的终止地理纬度坐标
Ellipsoid
椭球
-
- Lines to polygons
- 线条到多边形
-
-
- Input line vector layer
- 输入线条矢量图层
-
-
- Currently QGIS doesn't allow simultaneous access from
- different threads to the same datasource. Make sure your layer's
- attribute tables are closed. Continue?
- 目前QGIS不允许从不同的线程同时访问相同的数据源。
- 请确保你的图层的属性表已经关闭。
- 要继续吗？
-
-
- One or more features in the output layer may have invalid geometry, please check using the check validity tool
-
- 输出图层的一个或多个要素中可能含有无效的几何图形，请使用有效性检查工具检查一下
-
-
- Error loading output shapefile:
-%s
- 载入以下输出shape文件时出错：
-%s
-
-
- Created output shapefile:
-%s
-%s
-
-
- Created output shapefile:
-{0}
-{1}
-
-Would you like to add the new layer to the TOC?
- 已创建以下输出文件：
-{0}
-{1}
-需要加载新图层到TOC中去吗？
-
-
- Error loading output shapefile:
-{0}
- 加载输出的矢量文件出错：
-{0}
-
-
- Layer '{0}' updated
- 图层‘{0}’已更新
-
-
- Created output shapefile:
-%1
-%2
-
-Would you like to add the new layer to the TOC?
- 已创建输出shape文件：
-%1
-%2
-
-要将新图层添加到地图视图中吗？
-
Polygon centroids
多边形质心
@@ -5776,6 +4924,14 @@ Would you like to add the new layer to the TOC?
Buffer region
缓冲区域
+
+ Lines to polygons
+ 线条到多边形
+
+
+ Input line vector layer
+ 输入线条矢量图层
+
Polygon from layer extent
按图层范围创建多边形
@@ -5794,7 +4950,11 @@ Would you like to add the new layer to the TOC?
Currently QGIS doesn't allow simultaneous access from different threads to the same datasource. Make sure your layer's attribute tables are closed. Continue?
-
+
+ Cancel
+ 取消
Error processing specified tolerance!
@@ -5813,23 +4973,29 @@ Please choose another field...
请选择另一个字段...
- Error loading output shapefile:
-%1
- 载入以下输出shape文件时出错：
-%1
+ One or more features in the output layer may have invalid geometry, please check using the check validity tool
+
+ 输出图层的一个或多个要素中可能含有无效的几何图形，请使用有效性检查工具检查一下
- Layer '%1' updated
- 已更新图层“%1”
+ Error loading output shapefile:
+%s
+
+
+ Created output shapefile:
+%s
+%s
+
+
+ Layer '{0}' updated
+ 图层‘{0}’已更新
Error writing output shapefile.
写入输出shape文件时出错。
-
- Cancel
- 取消
-
GeoprocessingDialog
@@ -5901,10 +5067,6 @@ Please choose another field...
Intersect
交集操作
-
- Symetrical difference
- 对称区别
-
Clip layer
剪裁图层
@@ -5925,6 +5087,14 @@ Please choose another field...
Unable to delete existing shapefile.
无法删除现有的shape文件。
+
+ Cancel
+ 取消
+
+
+ Close
+ 关闭
+
No output created. File creation error:
%s
@@ -5944,12 +5114,6 @@ Please choose another field...
%s
载入以下输出shape文件时出错：
%s
-
-
- No output created. File creation error:
-%1
- 未创建输出。文件创建错误：
-%1
@@ -5957,6 +5121,10 @@ Warnings:
警告：
+
+ Symmetrical difference
+ 对称差分
+
Some output geometries may be missing or invalid.
@@ -5969,14 +5137,6 @@ Would you like to add the new layer anyway?
-
-Would you like to add the new layer to the TOC?
-
-
-要将新图层添加到地图视图中吗？
-
-
-
Input CRS error: Different input coordinate reference systems detected, results may not be as expected.
输入坐标参照系错误：检测到不同的输入坐标参照系，结果可能在意料之外。
@@ -5998,32 +5158,6 @@ Feature geometry error: One or more output features ignored due to invalid geome
GEOS geoprocessing error: One or more input features have invalid geometry.
GEOS地理处理错误：一个或多个要素包含无效的几何图形。
-
- Cancel
- 取消
-
-
- Symmetrical difference
- 对称差分
-
-
- Close
- 关闭
-
-
- Created output shapefile:
-%1
-%2%3
- 创建输出shape文件：
-%1
-%2%3
-
-
- Error loading output shapefile:
-%1
- 载入以下输出shape文件时出错：
-%1
-
GlobePlugin
@@ -6116,14 +5250,6 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Abort
放弃
-
- Point layer error
- 点图层错误
-
-
- Could not identify the vector data provider.
- 无法识别该矢量数据源。
-
Heatmap generation aborted
@@ -6180,23 +5306,11 @@ GEOS geoprocessing error: One or more input features have invalid geometry.Heatmap Plugin
热图插件
-
- Input Point Vector
- 输入点图层
-
-
- Output Raster
- 输出栅格
-
...
...
-
- Output Format
- 输出格式
-
Input point layer
@@ -6307,52 +5421,13 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Add generated file to map
-
-
- Decay Ratio
- 衰减率
-
-
- 0.1
- 0.1
+
Advanced
高级
-
- Row
- 行
-
-
- Cell Size X
- 横坐标格子大小
-
-
- Column
- 列
-
-
- Cell Size Y
- 纵坐标格子大小
-
-
- Use Radius from field
- 设定半径为
-
-
-
- Help
-
- Dialog
- 对话框
-
-
- about:blank
- about:blank
-
HelpEditionDialog
@@ -6373,11 +5448,11 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Confirmation
-
Are you sure you want to clear log?
-
Create test
@@ -6399,7 +5474,7 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Save
- 保存
+
@@ -6430,18 +5505,10 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
MainWindow
- &Edit
编辑(&E)
-
- &File
- 文件(&F)
-
-
- &Open Recent Projects
- 打开最近的项目(&O)
-
Print Composers
@@ -6458,48 +5525,159 @@ GEOS geoprocessing error: One or more input features have invalid geometry.选择
- Measure
测量
- &Layer
- 图层(&L)
-
-
- New
- 新建
-
-
- &Settings
- 设置(&S)
-
-
- &Plugins
- 插件(&P)
-
-
- New Project From Template
- 由模板新建项目
-
-
- &Decorations
装饰 (&D)
- &Layer
+ 图层(&L)
+
+
+ New
+ 新建
+
+
+ &Plugins
+ 插件(&P)
+
+
+ &Help
+ 帮助(&H)
+
+
+ &Settings
+ 设置(&S)
+
+
+ &Raster
栅格(&R)
- &Help
- 帮助(&H)
+ Vect&or
+ 矢量(&O)
+
+
+ &OpenStreetMap
+ 开放街道图(&O)
+
+
+ File
+ 文件
+
+
+ Manage Layers
+ 管理图层
+
+
+ Digitizing
+ 数字化
+
+
+ Advanced Digitizing
+ 高级数字化
+
+
+ Map Navigation
+ 地图浏览
+
+
+ Attributes
+ 属性
+
+
+ Plugins
+ 插件
+
+
+ Help
+ 帮助
+
+
+ Raster
+ 栅格
+
+
+ Label
+ 标签
+
+
+ Vector
+ 矢量
+
+
+ Database
+ 数据库
+
+
+ Web
+ 网络
+
+
+ Ctrl+N
+ Ctrl+N
+
+
+ Ctrl+O
+ Ctrl+O
+
+
+ Ctrl+S
+ Ctrl+S
+
+
+ Ctrl+Shift+S
+ Ctrl+Shift+S
+
+
+ Save as Image...
+ 另存为位图...
+
+
+ &New Print Composer
+ 新建打印版式(&N)
+
+
+ Ctrl+P
+ Ctrl+P
+
+
+ Composer Manager...
+ 版式管理...
- Vect&or
- 矢量(&O)
+ Preview Mode
+
- &OpenStreetMap
- 开放街道图(&O)
+ Paste Features as
+
- File
- 文件
+ &New
+ 新建(&N)
- Manage Layers
- 管理图层
+ &Open...
+ 打开(&O)...
- Digitizing
- 数字化
+ &Save
+ 保存(&S)
- Advanced Digitizing
- 高级数字化
+ Save &As...
+ 另存为(&A)...
- Map Navigation
- 地图浏览
+ Exit QGIS
+ 退出QGIS
- Attributes
- 属性
-
-
- Plugins
- 插件
-
-
- Help
- 帮助
-
-
- Raster
- 栅格
-
-
- Label
- 标签
-
-
- Vector
- 矢量
-
-
- Database
- 数据库
-
-
- Web
- 网络
-
-
- &New Project
- 新建项目(&N)
-
-
- Ctrl+N
- Ctrl+N
-
-
- &Open Project...
- 打开项目(&O)...
-
-
- Ctrl+O
- Ctrl+O
-
-
- &Save Project
- 保存项目(&S)
-
-
- Ctrl+S
- Ctrl+S
-
-
- Save Project &As...
- 项目另存为(&A)...
-
-
- Ctrl+Shift+S
- Ctrl+Shift+S
-
-
- Save as Image...
- 另存为位图...
-
-
- &New Print Composer
- 新建打印版式(&N)
-
-
- Ctrl+P
- Ctrl+P
-
-
- Embed Layers and Groups...
- 嵌入图层和组...
-
-
- Run Feature Action
- 执行要素动作
-
-
- Touch zoom and pan
- 触摸缩放和平移
-
-
- Offset Curve
- 偏移曲线
-
-
- Exit
- 退出
-
-
- Ctrl+Q
Ctrl+Q
- &Undo
撤销(&U)
- Ctrl+Z
Ctrl+Z
- &Redo
重做(&R)
- Ctrl+Shift+Z
- Ctrl+Shift+Z
- Cut Features
剪切要素
- Ctrl+X
Ctrl+X
- Copy Features
复制要素
- Ctrl+C
Ctrl+C
- Paste Features
粘贴要素
- Ctrl+V
Ctrl+V
- Capture Point
- 捕获点
+ Add Feature
+ 添加要素
- Ctrl+.
Ctrl+.
- Capture Line
- 捕获线
-
-
- Ctrl+/
- Ctrl+/
-
-
- Capture Polygon
- 捕获多边形
-
-
- Move Feature(s)
移动要素
- Reshape Features
重塑要素
- Split Features
分割要素
- Split Parts
-
- Delete Selected
删除选中的记录
- Add Ring
添加环形
- Add Part
添加部件
- Simplify Feature
简化要素
- Delete Ring
删除环形
- Delete Part
删除部件
- Merge Selected Features
+ 合并选中的要素
+
+
+ Merge Attributes of Selected Features
+ 合并选中要素的属性
+
+
+ Node Tool
节点工具
- Rotate Point Symbols
旋转点符号
- Snapping Options...
对齐选项...
- Pan Map
平移地图
- Zoom In
放大
- Ctrl++
Ctrl++
- Zoom Out
缩小
- Ctrl+-
Ctrl+-
- Select Feature(s)
- Select Single Feature
+ 单一要素
- Select Features by area or single click
- Select Features by Rectangle
+ 按矩形
- Select Features by Polygon
+ 按多边形
+
+
+ Select Features by Freehand
+ 自由手绘方式
+
+
+ Select Features by Radius
+ 按半径
+
+
+ Deselect Features from All Layers
+ 在所有图层中取消选择要素
+
+
+ Identify Features
识别要素
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
测距
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
测量面积
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
测量角度
- Zoom Full
全图显示
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
缩放到整个图层范围
- Zoom to Selection
缩放到选中的范围
- Ctrl+J
Ctrl+J
- Zoom Last
回到上一视图
- Zoom Next
下一视图
- Zoom Actual Size
实际大小
- Zoom to Native Pixel Resolution
缩放到原始像素分辨率
- Map Tips
地图提示工具
- Show information about a feature when the mouse is hovered over it
当鼠标指针移到要素上方时显示其信息
- New Bookmark...
新建书签...
- Ctrl+B
Ctrl+B
- Show Bookmarks
显示书签
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
刷新
- Ctrl+R
- Ctrl+R
-
-
- Text Annotation
文本注记
- Form Annotation
+ 窗体注记
+
+
+ Move Annotation
移动注记
- Labeling
加标签
- Layer Labeling Options
图层标签选项
- New Shapefile Layer...
Shapefile图层...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
SpatiaLite图层...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
栅格计算器...
- Add Vector Layer...
添加矢量图层...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
添加栅格图层...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
+ 添加PostGIS图层...
+
+
+ Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
添加SpatiaLite图层...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
+ 添加MSSQL空间图层...
+
+
+ Add Oracle Spatial Layer...
添加Oracle空间图层...
- Ctrl+Shift+O
+ Ctrl+Shift+O
+
+
+ Add WMS/WMTS Layer...
添加WMS/WMTS图层...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
打开属性表
- Toggle Editing
+ 切换编辑状态
+
+
+ Toggles the editing state of the current layer
切换当前图层的编辑状态
- Save for Selected Layer(s)
保存选中的图层
- Save edits to current layer, but continue editing
将编辑保存到当前图层，接着继续编辑
- Save As...
+ 另存为...
+
+
+ Add from Layer Definition File...
+
+
+ Save As Layer Definition File...
+
+
+ Normal
+
+
+ Normal preview mode
+
+
+ Simulate Photocopy (Grayscale)
+
+
+ Simulate photocopy (grayscale)
+
+
+ Simulate Fax (Mono)
+
+
+ Simulate fax (mono)
+
+
+ Simulate Color Blindness (Protanope)
+
+
+ Simulate color blindness (protanope)
+
+
+ Simulate Color Blindness (Deuteranope)
+
+
+ Simulate color blindness (deuteranope)
+
+
+ Set Scale Visibility of Layer(s)
+
+
+ Remove Layer(s)
移除图层
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
设置图层的坐标参照系
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
+ 将图层的坐标参照系设定为项目的坐标参照系
+
+
+ Properties...
+ 属性...
+
+
+ Query...
+ 查询...
+
+
+ Add to Overview
+ 添加到鹰眼图中
+
+
+ Add All to Overview
+ 将所有图层添加到鹰眼图中
+
+
+ Remove All from Overview
+ 移除鹰眼图内所有的图层
+
+
+ Show All Layers
+ 显示所有图层
+
+
+ Ctrl+Shift+U
+ Ctrl+Shift+U
+
+
+ Hide All Layers
+ 隐藏所有图层
+
+
+ Ctrl+Shift+H
+ Ctrl+Shift+H
+
+
+ Manage and Install Plugins...
管理并安装插件...
- F11
- F11
+ Open Field Calculator
+ 打开字段计算器
- Add Delimited Text Layer...
+ 添加文本数据图层...
+
+
+ Add Delimited Text Layer
+ 添加文本数据图层
+
+
+ New Vector Layer
+
+
+ Paste features in clipboard into a new OGR vector layer.
+
+
+ New Memory Vector Layer
+
+
+ Paste features in clipboard into a new memory vector layer.
+
+
+ Toggle Full Screen Mode
+ 切换全屏模式
+
+
+ F5
+
+
+ Ctrl+F
+ Ctrl+F
+
+
+ F11
+
+
+ Project Properties...
+ 项目属性...
+
+
+ Ctrl+Shift+P
+ Ctrl+Shift+P
+
+
+ Options...
+ 选项...
+
+
+ Custom CRS...
+ 自定义坐标参照系...
+
+
+ Configure shortcuts...
+ 设置快捷键...
+
+
+ Local Histogram Stretch
+ 局部直方图拉伸
+
+
+ Stretch histogram of active raster to view extents
+ 直方图拉伸活动影像到视图范围
+
+
+ Help Contents
+ 帮助
+
+
+ F1
+ F1
+
+
+ API documentation
+ API文档
+
+
+ QGIS Home Page
+ QGIS主页
+
+
+ Ctrl+H
+ Ctrl+H
+
+
+ Check QGIS Version
+ 检查QGIS版本
+
+
+ Check if your QGIS version is up to date (requires internet access)
+ 检查是否有新版本的QGIS (需要互联网接入)
+
+
+ About
+ 关于
+
+
+ QGIS Sponsors
+ QGIS赞助者
+
+
+ Move Label
+ 移动标签
+
+
+ Rotate Label
+ 旋转标签
+
+
+ Rotate Label
Ctl (Cmd) increments by 15 deg.
旋转标签
按住Ctl（Cmd）键，增减步长为15度。
- Change Label
+ 更改标签
+
+
+ Style Manager...
+ 样式管理...
+
+
+ Python Console
+ Python控制台
+
+
+ Full histogram stretch
+ 全图直方图拉伸
+
+
+ Stretch Histogram to Full Dataset
+ 全图直方图拉伸
+
+
+ Customization...
+ 自定义...
+
+
+ This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
+ 为了避免快捷方式冲突，该快捷方式在QgsCustomization中被拦截
+
+
+ Ctrl+M
+ Ctrl+M
+
+
+ Embed Layers and Groups...
+ 嵌入图层和组...
+
+
+ Embed layers and groups from other project files
+ 嵌入其他项目文件中的图层和组
+
+
+ &Copyright Label
+ 版权标签(&C)
+
+
+ Creates a copyright label that is displayed on the map canvas.
+ 在地图视图上创建一个版权标签。
+
+
+ &North Arrow
+ 罗盘(&N)
+
+
+ "Creates a north arrow that is displayed on the map canvas"
+ 在地图视图中创建一个罗盘
+
+
+ &Scale Bar
+ 比例尺(&S)
+
+
+ Creates a scale bar that is displayed on the map canvas
+ 在地图视图中创建一个比例尺
+
+
+ Add WFS Layer...
+ 添加WFS图层...
+
+
+ Add WFS Layer
+ 添加WFS图层
+
+
+ Feature Action
+ 要素动作
+
+
+ Run Feature Action
+ 执行要素动作
+
+
+ Pan Map to Selection
+ 在视图中将选中的部分居中
+
+
+ Touch zoom and pan
+ 触摸缩放和平移
+
+
+ Offset Curve
+ 偏移曲线
+
+
+ Copy style
+ 复制样式
+
+
+ Paste style
+ 粘贴样式
+
+
+ Add WCS Layer...
添加WCS图层...
- &Grid
网格(&G)
- Grid
网格
- Pin/Unpin Labels
钉住/取消钉住标签
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -7147,38 +6639,44 @@ Acts on all editable layers
动作对所有可编辑图层均有效
- Highlight Pinned Labels
突出现实钉住的标签
- New Blank Project
+ 新建空项目
+
+
+ Local Cumulative Cut Stretch
局部累积裁剪拉伸
- Local cumulative cut stretch using current extent, default limits and estimated values.
使用当前范围，默认限制和估计值进行局部累积裁剪拉伸。
- Full Dataset Cumulative Cut Stretch
全图累积裁剪拉伸
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
使用全图范围，默认限制和估计值进行累积裁剪拉伸。
- Show/Hide Labels
显示/隐藏标签
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -7189,637 +6687,130 @@ Acts on currently active editable layer
动作仅对当前活动的可编辑图层有效
- Html Annotation
Html注记
- Duplicate Layer(s)
创建图层副本
- SVG annotation
SVG注记
- Save for All Layers
保存所有图层
- Rollback for All Layers
回滚所有图层
- Cancel for All Layers
取消所有图层
- Rollback for Selected Layer(s)
回滚选中的图层
- Current Edits
当前编辑
- Cancel for Selected Layer(s)
取消选中的图层
- Save Layer Edits
保存图层编辑
- Rotate Feature(s)
旋转要素
- &Download data
下载数据(&D)
- &Import topology from XML
从XML导入拓扑结构(&I)
- &Export topology to SpatiaLite
将拓扑结构导出到SpatiaLite(&E)
- Increase brightness
增加亮度
- Decrease brightness
降低亮度
- Increase contrast
增加对比度
- Decrease contrast
降低对比度
- Select By Expression
按表达式选取
- Select features using an expression
使用表达式选择要素
- Need commercial support?
-
- DXF Export...
-
-
- Fill Ring
-
-
- Add from Layer Definition File...
-
+ Save As Layer Definition File...
-
-
- Normal
- 正常
-
-
- Normal preview mode
-
-
- Simulate Photocopy (Grayscale)
-
-
- Simulate photocopy (grayscale)
-
-
- Simulate Fax (Mono)
-
-
- Simulate fax (mono)
-
-
- Simulate Color Blindness (Protanope)
-
-
- Simulate color blindness (protanope)
-
-
- Simulate Color Blindness (Deuteranope)
-
-
- Simulate color blindness (deuteranope)
-
-
- Set Scale Visibility of Layer(s)
-
-
- Need Support?
- 需要支持吗？
-
-
- Open Field Calculator
- 打开字段计算器
-
-
- Add Delimited Text Layer...
- 添加文本数据图层...
-
-
- Add Delimited Text Layer
- 添加文本数据图层
-
-
- New Vector Layer
- 新建矢量图层
-
-
- Paste features in clipboard into a new OGR vector layer.
-
-
- New Memory Vector Layer
-
-
- Paste features in clipboard into a new memory vector layer.
-
-
- New Blank Project
- 新建空项目
-
-
- Tile scale slider
- 地图方块滑动条
-
-
- Remove All from Overview
- 移除鹰眼图内所有的图层
-
-
- Style Manager...
- 样式管理...
-
-
- Stretch Histogram to Full Dataset
- 全图直方图拉伸
-
-
- Customization...
- 自定义...
-
-
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
- 为了避免快捷方式冲突，该快捷方式在QgsCustomization中被拦截
-
-
- Ctrl+M
- Ctrl+M
-
-
- Embed layers and groups from other project files
- 嵌入其他项目文件中的图层和组
-
-
- &Copyright Label
- 版权标签(&C)
-
-
- Creates a copyright label that is displayed on the map canvas.
- 在地图视图上创建一个版权标签。
-
-
- &North Arrow
- 罗盘(&N)
-
-
- "Creates a north arrow that is displayed on the map canvas"
- 在地图视图中创建一个罗盘
-
-
- &Scale Bar
- 比例尺(&S)
-
-
- Creates a scale bar that is displayed on the map canvas
- 在地图视图中创建一个比例尺
-
-
- Add WFS Layer...
- 添加WFS图层...
-
-
- Add WFS Layer
- 添加WFS图层
-
-
- Feature Action
- 要素动作
-
-
- Pan Map to Selection
- 在视图中将选中的部分居中
-
-
- Copy style
- 复制样式
-
-
- Paste style
- 粘贴样式
-
-
- Properties...
- 属性...
-
-
- Paste Features as
-
-
- &New
- 新建(&N)
-
-
- &Open...
- 打开(&O)...
-
-
- &Save
- 保存(&S)
-
-
- Save &As...
- 另存为(&A)...
-
-
- Composer Manager...
- 版式管理...
-
-
- Exit QGIS
- 退出QGIS
-
-
- Add Feature
- 添加要素
-
-
- Merge Selected Features
- 合并选中的要素
-
-
- Merge Attributes of Selected Features
- 合并选中要素的属性
-
-
- Select Single Feature
- 单一要素
-
-
- Select Features by Rectangle
- 按矩形
-
-
- Select Features by Polygon
- 按多边形
-
-
- Select Features by Freehand
- 自由手绘方式
-
-
- Select Features by Radius
- 按半径
-
-
- Deselect Features from All Layers
- 在所有图层中取消选择要素
-
-
- Form Annotation
- 窗体注记
-
-
- Add PostGIS Layers...
- 添加PostGIS图层...
-
-
- Add MSSQL Spatial Layer...
- 添加MSSQL空间图层...
-
-
- Toggle Editing
- 切换编辑状态
-
-
- Save Edits
- 保存编辑
-
-
- Save As...
- 另存为...
-
-
- Save Selection as Vector File...
- 将选中的部分另存为矢量文件...
-
-
- Set Project CRS from Layer
- 将图层的坐标参照系设定为项目的坐标参照系
-
-
- Query...
- 查询...
-
-
- Add to Overview
- 添加到鹰眼图中
-
-
- Ctrl+Shift+O
- Ctrl+Shift+O
-
-
- Add All to Overview
- 将所有图层添加到鹰眼图中
-
-
- Remove All From Overview
- 移除鹰眼图内所有的图层
-
-
- Show All Layers
- 显示所有图层
-
-
- Ctrl+Shift+U
- Ctrl+Shift+U
-
-
- Hide All Layers
- 隐藏所有图层
-
-
- Ctrl+Shift+H
- Ctrl+Shift+H
-
-
- Manage Plugins...
- 管理插件...
-
-
- Toggle Full Screen Mode
- 切换全屏模式
-
-
- Ctrl+F
- Ctrl+F
-
-
- Preview Mode
-
-
- F5
- F5
-
-
- Project Properties...
- 项目属性...
-
-
- Ctrl+Shift+P
- Ctrl+Shift+P
-
-
- Options...
- 选项...
-
-
- Custom CRS...
- 自定义坐标参照系...
-
-
- Configure shortcuts...
- 设置快捷键...
-
-
- Local Histogram Stretch
- 局部直方图拉伸
-
-
- Stretch histogram of active raster to view extents
- 直方图拉伸活动影像到视图范围
-
-
- Help Contents
- 帮助
-
-
- F1
- F1
-
-
- API documentation
- API文档
-
-
- QGIS Home Page
- QGIS主页
-
-
- Ctrl+H
- Ctrl+H
-
-
- Check QGIS Version
- 检查QGIS版本
-
-
- Check if your QGIS version is up to date (requires internet access)
- 检查是否有新版本的QGIS (需要互联网接入)
-
-
- About
- 关于
-
-
- QGIS Sponsors
- QGIS赞助者
-
-
- Move Label
- 移动标签
-
-
- Rotate Label
- 旋转标签
-
-
- Change Label
-
-
- Python Console
- Python控制台
-
-
- Full histogram stretch
- 全图直方图拉伸
+ Fill Ring
+
@@ -7827,76 +6818,76 @@ Acts on currently active editable layer
Manage connections
- 管理连接
+
Save to file
- 保存到文件
+
Browse
- 浏览
+
Load from file
- 从文件载入
+
Load
- 载入
+
Save
- 保存
+
eXtensible Markup Language (*.xml *.XML)
-
Save connections
- 保存连接
+
Load connections
- 载入连接
+
Save Connections
-
Saved to %s
-
File %s exists. Overwrite?
-
Loading Connections
-
MetaSearch
MetaSearch plugin
-
Search Metadata Catalogues
-
MetaSearch plugin help
-
Get Help on MetaSearch
-
@@ -7904,358 +6895,322 @@ Acts on currently active editable layer
MetaSearch
-
Search
- 搜索
+
Find
- 查找
+
Set global
-
Map extent
-
-180
- -180
+
90
- 90
+
Records
-
-90
- -90
+
180
- 180
+
From
-
Keywords
- 关键字
+
Results
- 结果
+
>
- >
+
<<
-
Add WCS
-
Add WMS/WMTS
-
<
- <
+
Add WFS
-
Abstract
- 摘要
+
Double click to see full record information
-
Type
- 类型
+
Title
- 标题
+
View search results as XML
-
>>
-
Services
-
Service info
-
GetCapabilities response
-
New
-
Edit
- 编辑
+
Delete
- 删除
+
Save
- 保存
+
Add default services
-
Load
- 载入
+
Settings
- 设置
+
Connection naming
-
When saving the connection of an OWS service
-
Use the OWS Service Title and ask before overwriting
-
Use the OWS Service Title and always overwrite if already available
-
Use a temporary name, which you can change later
-
No services/connections defined. To get started with MetaSearch, create a new connection by clicking 'New' or click 'Add default services'.
-
New Catalogue service
-
Edit Catalogue service
-
Remove service %s?
-
Confirm delete
-
%s exists. Overwrite?
-
Loading connections
- 正在载入连接
+
Search error
-
Search error: %s
-
Connection error
-
Connection error: %s
-
0 results
-
Showing %d - %d of %d result%s
-
No abstract
-
End of results. Go to start?
-
Navigation
-
Start of results. Go to end?
-
Error connecting to %s: %s
-
Connection %s exists. Overwrite?
-
Saving server
-
GetRecords error
-
Error getting response: %s
-
Error connecting to service: %s
-
Value Error: %s
-
Unknown Error: %s
-
CSW Connection error
-
ModelerDialog
-
- Edit model help
- 编辑模型帮助
-
-
- Run
- 运行
-
-
- Execute current model
- 执行当前模型
-
-
- Open
- 打开
-
-
- Open existing model
- 打开已有的模型
-
-
- Save
- 保存
-
-
- Save current model
- 保存当前模型
-
-
- Save as ...
- 另存为...
-
-
- Save current model as
- 当前模型另存为
-
Search...
搜索...
Message
- 消息
+
There are unsaved changes in model. Close modeler without saving?
-
Empty model
@@ -8263,29 +7218,11 @@ Acts on currently active editable layer
Save Model As Image
-
PNG files (*.png *.PNG)
-
-
- Unable to save edits. Reason:
- %s
-
-
- This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
-
-
- The selected model could not be loaded.
-See the log for more information.
-
-
- Model doesn't contains any algorithms and/or parameters and can't be executed
- 模型不含任何可执行的算法或参数
+
Warning
@@ -8303,31 +7240,26 @@ See the log for more information.
Processing models (*.model)
处理模型（*.model）
-
- SEXTANTE models (*.model)
- SEXTANTE模型（*.model）
-
I/O error
输入/输出错误
Unable to save edits. Reason:
- %1
- 无法保存编辑。原因：
- %1
+ %s
+
Can't save model
无法保存模型
- This model can't be saved in its original location
-(probably you do not have permission to do it).
-Please, use the 'Save as...' option.
- 该模型无法在原始位置保存
-（可能你没有权限保存）。
-请“另存为”。
+ Model doesn't contains any algorithms and/or parameters and can't be executed
+
+
+ This model can't be saved in its original location (probably you do not have permission to do it). Please, use the 'Save as...' option.
+
Model saved
@@ -8347,9 +7279,8 @@ Please, use the 'Save as...' option.
The selected model could not be loaded.
-Wrong line: %1
- 无法载入选中的模型。
-错误行：%1
+Wrong line: %s
+
Parameters
@@ -8360,15 +7291,15 @@ Wrong line: %1
MultipleInputDialog
Select all
- 全选
+
Clear selection
- 清除选择
+
Toggle selection
-
@@ -8376,29 +7307,29 @@ Wrong line: %1
Create a new Catalogue connection
-
Name
- 名称
+
URL
-
Save connection
- 保存连接
+
Both Name and URL must be provided
-
Overwrite %s?
-
@@ -8412,94 +7343,71 @@ Wrong line: %1
NumberInputDialog
[Enter your formula here]
-
Values from data layers extents
-
Min X
-
Max X
-
Min Y
-
Max Y
-
Cellsize
-
Values from raster layers statistics
-
Mean
- 均值
+
Std. deviation
-
Max value
-
Min value
-
Values from QGIS map canvas
-
Current extent
- 当前范围
+
Full extent of all layers in map canvas
-
Wrong expression
-
The expression entered is not correct
-
-
-
- OgrConverterGuiBase
-
- Source
- 源
-
-
- File
- 文件
-
-
- Directory
- 目录
-
-
- Browse
- 浏览
-
-
- Layer
- 图层
+
@@ -8514,6 +7422,11 @@ Wrong line: %1
Name
名称
+
+ Name of the new connection
+ 新连接的名称
+
Database instance
@@ -8529,783 +7442,37 @@ Wrong line: %1
Password
密码
-
- Name of the new connection
- 新连接的名称
-
Save Password
保存密码
-
- OsmAddRelationDlg
-
- Create OSM relation
- 创建开放街道图关系
-
-
- Relation type:
- 关系类型：
-
-
- ...
- ...
-
-
- Properties
- 属性
-
-
- Members
- 成员
-
-
- Create
- 创建
-
-
- Cancel
- 取消
-
-
- Show type description
- 显示类型描述
-
-
- Shows brief description of selected relation type.
- 显示所选关系类型的简要描述。
-
-
- Generate tags
- 生成标签
-
-
- Remove all selected tags
- 移除全部选中的标签
-
-
- Removes all selected tags.
- 移除全部选中的标签。
-
-
- Select member on map
- 在地图中选择成员
-
-
- Starts process of selecting next relation member on map.
- 启动在地图中选择下一个关系成员的进程。
-
-
- Remove all selected members
- 移除全部选中的成员
-
-
- Removes all selected members.
- 移除全部选中的成员。
-
-
- Save
- 保存
-
-
- Edit OSM relation
- 编辑开放街道图关系
-
-
- OSM Information
- 开放街道图信息
-
-
-
- OsmDownloadDlg
-
- Download OSM data
- 下载开放街道图数据
-
-
- Extent
- 范围
-
-
- Latitude:
- 纬度：
-
-
- From
- 从
-
-
- To
- 到
-
-
- Longitude:
- 经度：
-
-
- <nothing>
- <无>
-
-
- ...
- ...
-
-
- Download to:
- 下载到：
-
-
- Open data automatically after download
- 下载完成后自动打开数据
-
-
- Replace current data (current layer will be removed)
- 取代当前数据（当前图层将被移除）
-
-
- Use custom renderer
- 使用自定义渲染器
-
-
- Download
- 下载
-
-
- Cancel
- 取消
-
-
- OSM Download
- 开放街道图下载
-
-
- Unable to save the file %1: %2.
- 无法保存文件%1：%2。
-
-
- Waiting for OpenStreetMap server ...
- 正在等待开放街道图服务器回应...
-
-
- Download process failed. OpenStreetMap server response: %1 - %2
- 下载进程失败。开放街道图服务器回应：%1 - %2
-
-
- Check your internet connection
- 请检查你的网络连接
-
-
- OSM Download Error
- 开放街道图下载错误
-
-
- Download failed: %1.
- 下载失败：%1。
-
-
- Choose file to save
- 选择一个文件名以保存文件
-
-
- OSM Files (*.osm)
- 开放街道图文件 (*.osm)
-
-
- Getting data
- 获取数据
-
-
- The OpenStreetMap server you are downloading OSM data from (~ api.openstreetmap.org) has fixed limitations of how much data you can get. As written at <http://wiki.openstreetmap.org/wiki/Getting_Data> neither latitude nor longitude extent of downloaded region can be larger than 0.25 degrees. Note that Quantum GIS allows you to specify any extent you want, but OpenStreetMap server will reject all request that won't satisfy downloading limitations.
- 你正在下载数据的开放街道图服务器（~ api.openstreetmap.org）对于你可以获取多少数据有固定的限制。如<http://wiki.openstreetmap.org/wiki/Getting_Data>所述，下载区域的纬度和经度范围均不能大于0.25度。需要注意的是，Quantum GIS允许你指定任意范围，但开放街道图服务器会拒绝所有超出下载限制的请求。
-
-
- Both extents are too large!
- 两个范围都过大！
-
-
- Latitude extent is too large!
- 纬度范围过大！
-
-
- Longitude extent is too large!
- 经度范围过大！
-
-
- OK! Area is probably acceptable to server.
- 没问题！指定的区域可被服务器接受。
-
-
-
- OsmFeatureDW
-
- OSM Plugin
- 开放街道图插件
-
-
- The 'Create OSM Relation' dialog was closed automatically because current OSM database was changed.
- 因当前开放街道图数据库发生了改变，“创建开放街道图关系”对话框已自动关闭。
-
-
- Choose OSM feature first.
- 先选择开放街道图要素。
-
-
- Choose relation for editing first.
- 先选择要编辑的关系。
-
-
- Snapping ON. Hold Ctrl to disable it.
- 已启用对齐。按住Ctrl键即可将其禁用。
-
-
- Hide OSM Edit History
- 隐藏开放街道图编辑历史
-
-
- Show OSM Edit History
- 显示开放街道图编辑历史
-
-
- OSM Feature
- 开放街道图要素
-
-
- ...
- ...
-
-
- Create point
- 创建点
-
-
- Create line
- 创建线条
-
-
- Create polygon
- 创建多边形
-
-
- Create relation
- 创建关系
-
-
- Undo
- 撤销
-
-
- Redo
- 重做
-
-
- Show/Hide OSM Edit History
- 显示/隐藏开放街道图编辑历史
-
-
- Feature:
- 要素：
-
-
- unknown
- 未知
-
-
- Properties
- 属性
-
-
- Remove selected tags
- 移除选中的标签
-
-
- Relations
- 关系
-
-
- Add relation
- 添加关系
-
-
- Edit relation
- 编辑关系
-
-
- Remove relation
- 移除关系
-
-
- Relation tags:
- 关系标签：
-
-
- 1
- 1
-
-
- Relation members:
- 关系成员：
-
-
- Identify feature
- 识别要素
-
-
- Move feature
- 移动要素
-
-
- Remove this feature
- 移除该要素
-
-
-
- OsmImportDlg
-
- Import data to OSM
- 将数据导入到开放街道图
-
-
- In this dialog you can import a layer loaded in QGIS into active OSM data.
- 通过本对话框你可以将QGIS中已载入的图层导入到活动的开放街道图数据中。
-
-
- Layer
- 图层
-
-
- Import only current selection
- 仅导入当前所选
-
-
- Layer doesn't exist
- 图层不存在
-
-
- The selected layer doesn't exist anymore!
- 选中的图层已经不存在！
-
-
- Importing features...
- 正在导入要素...
-
-
- Cancel
- 取消
-
-
- Import
- 导入
-
-
- Import has been completed.
- 导入已完成。
-
-
-
- OsmLoadDlg
-
- Load OSM
- 载入开放街道图
-
-
- OpenStreetMap file to load:
- 要载入的开放街道图文件：
-
-
- ...
- ...
-
-
- Add columns for tags:
- 为标签添加字段：
-
-
- Use custom renderer
- 使用自定义渲染器
-
-
- Replace current data (current layers will be removed)
- 取代当前数据（当前图层将被移除）
-
-
- Choose an Open Street Map file
- 选择一个开放街道图文件
-
-
- OSM Files (*.osm)
- 开放街道图文件 (*.osm)
-
-
- OSM Load
- 开放街道图载入
-
-
- Please enter path to OSM data file.
- 请输入放街道图数据文件的路径。
-
-
- Path to OSM file is invalid: %1.
- 开放街道图文件的路径无效：%1。
-
-
- Error
- 错误
-
-
- Layers of OSM file "%1" are loaded already.
- 开放街道图文件“%1”的图层已经载入。
-
-
- Failed to load polygon layer.
- 载入多边形图层失败。
-
-
- Failed to load line layer.
- 载入线条图层失败。
-
-
- Failed to load point layer.
- 载入点图层失败。
-
-
- Could not connect to setRenderer signal.
- 无法连接到setRenderer（设置渲染器）信号。
-
-
- Failed to load layers: %1
- 载入图层失败：%1
-
-
-
- OsmPlugin
-
- Load OSM from file
- 从文件载入开放街道图
-
-
- Load OpenStreetMap from file
- 从文件载入开放街道图
-
-
- Import data from a layer
- 从图层导入数据
-
-
- Import data from a layer to OpenStreetMap
- 将数据从图层导入到开放街道图
-
-
- Save OSM to file
- 将开放街道图保存到文件
-
-
- Save OpenStreetMap to file
- 将开放街道图保存到文件
-
-
- Download OSM data
- 下载开放街道图数据
-
-
- Download OpenStreetMap data
- 下载开放街道图数据
-
-
- Upload OSM data
- 上传开放街道图数据
-
-
- Upload OpenStreetMap data
- 上传开放街道图数据
-
-
- Show/Hide OSM Feature Manager
- 显示/隐藏开放街道图要素管理器
-
-
- Show/Hide OpenStreetMap Feature Manager
- 显示/隐藏开放街道图要素管理器
-
-
- Sorry
- 不好意思
-
-
- You don't have OSM provider installed!
- 你没有安装开放街道图数据源！
-
-
- OSM Save to file
- 将开放街道图保存到文件
-
-
- No OSM data are loaded/downloaded or no OSM layer is selected in Layers panel.
-Please change this situation first, because OSM Plugin doesn't know what to save.
- 没有载入/下载任何开放街道图数据，或没有在图层面板中选择任何开放街道图图层。
-请先改变这一状况，因为开放街道图插件不知道要保存什么东西。
-
-
- OSM Upload
- 开放街道图上传
-
-
- No OSM data are loaded/downloaded or no OSM layer is selected in Layers panel.
-Please change this situation first, because OSM Plugin doesn't know what to upload.
- 没有载入/下载任何开放街道图数据，或没有在图层面板中选择任何开放街道图图层。
-请先改变这一状况，因为开放街道图插件不知道要上传什么。
-
-
- OSM Import
- 开放街道图导入
-
-
- No OSM data are loaded/downloaded or no OSM layer is selected in Layers panel.
-Please change this situation first, because OSM Plugin doesn't know what layer will be destination of the import.
- 没有载入/下载任何开放街道图数据，或没有在图层面板中选择任何开放街道图图层。
-请先改变这一状况，因为开放街道图插件不知道哪个图层是导入的目标。
-
-
- There are currently no available vector layers.
- 当前没有可用的矢量图层。
-
-
-
- OsmSaveDlg
-
- Choose an Open Street Map file
- 选择一个开放街道图文件
-
-
- OSM Files (*.osm)
- 开放街道图文件 (*.osm)
-
-
- Save OSM to file
- 将开放街道图保存到文件
-
-
- Unable to save the file %1: %2.
- 无法保存文件%1：%2。
-
-
- Initializing...
- 正在初始化...
-
-
- Saving nodes...
- 正在保存节点...
-
-
- Saving lines...
- 正在保存线条...
-
-
- Saving polygons...
- 正在保存多边形...
-
-
- Saving relations...
- 正在保存关系...
-
-
- Save OSM
- 保存开放街道图
-
-
- Where to save:
- 保存到：
-
-
- ...
- ...
-
-
- Features to save:
- 选择要保存的要素：
-
-
- Points
- 点
-
-
- Lines
- 线条
-
-
- Polygons
- 多边形
-
-
- Relations
- 关系
-
-
- Tags
- 标签
-
-
-
- OsmUndoRedoDW
-
- OSM Edit History
- 开放街道图编辑历史
-
-
- Clear all
- 全部清除
-
-
- ...
- ...
-
-
- Undo
- 撤销
-
-
- Redo
- 重做
-
-
-
- OsmUploadDlg
-
- Upload
- 上传
-
-
- OSM Upload
- 开放街道图上传
-
-
- Node addition failed.
- 添加节点失败。
-
-
- Node update failed.
- 更新节点失败。
-
-
- Node deletion failed.
- 删除节点失败。
-
-
- Relation addition failed.
- 添加关系失败。
-
-
- Relation update failed.
- 更新关系失败。
-
-
- Relation deletion failed.
- 删除关系失败。
-
-
- Connection to OpenStreetMap server cannot be established. Please check your proxy settings, firewall settings and try again.
- 无法建立到开放街道图服务器的连接。请检查你的代理设置和防火墙设置，然后再重试。
-
-
- Upload process failed. OpenStreetMap server response: %1 - %2.
- 上传进程失败。开放街道图服务器回应：%1 - %2。
-
-
- Authentication failed. Please try again with correct login and password.
- 验证失败，请输入正确的登录名和密码，再试一次。
-
-
- Setting host failed.
- 设置主机失败。
-
-
- Setting user and password failed.
- 设置用户名和密码失败。
-
-
- Setting proxy failed.
- 设置代理失败。
-
-
- Upload OSM data
- 上传开放街道图数据
-
-
- 1
- 1
-
-
- 2
- 2
-
-
- 3
- 3
-
-
- 4
- 4
-
-
- 5
- 5
-
-
- Comment on your changes:
- 你的更改备注：
-
-
- OSM account
- 开放街道图帐号
-
-
- Username:
- 用户名：
-
-
- Password:
- 密码：
-
-
- Show password
- 显示密码
-
-
- Save password
- 保存密码
-
-
- Uploading data...
- 正在上传数据...
-
-
OutputSelectionPanel
[Save to temporary file]
-
Save to a temporary file
-
Save to file...
-
Save to memory layer
-
Save file
- 保存文件
+
Select directory
-
@@ -9347,14 +7514,6 @@ Please change this situation first, because OSM Plugin doesn't know what la
There is no defined database connection "%s".
已定义的数据库连接“%s”不存在。
-
- Enter password
- 输入密码
-
-
- Enter password for connection "%s":
- 为连接“%s”输入密码：
-
PrepareAPIDialog
@@ -9433,13 +7592,9 @@ Please change this situation first, because OSM Plugin doesn't know what la
Python
-
- Python
- Python
-
Python warning
-
An error has occured while executing Python code:
@@ -9481,119 +7636,12 @@ Please change this situation first, because OSM Plugin doesn't know what la
Error while unloading plugin %s
卸下插件%s时出错
-
- Couldn't load plugin '%1' from ['%2']
- 无法从['%2']载入插件'%1'
-
-
- Couldn't load plugin %1
- 无法载入插件%1
-
-
- %1 due an error when calling its classFactory() method
- %1，由于调用它的classFactory()方法时发生了一个错误
-
-
- %1 due an error when calling its initGui() method
- %1，由于调用它的initGui()方法时发生了一个错误
-
-
- Error while unloading plugin %1
- 卸下插件%1时出错
-
PythonConsole
- Open file
- 打开文件
-
-
- Save
- 保存
-
-
- Cut
- 剪切
-
-
- Copy
- 复制
-
-
- Paste
- 粘帖
-
-
- <b>"{0}"</b> was not found.
- <b>"{0}"</b>未找到.
-
-
- [Temporary file saved in {0}]
- [临时文件保存在{0}]
-
-
- ## Script error: {0}
- ##脚本作物：{0}
-
-
- ## Script executed successfully: {0}
- ##脚本执行完毕：{0}
-
-
- Cannot execute file {0}. Error: {1}
-
- 无法执行文件{0}.错误：{1}
-
-
-
- The file <b>"{0}"</b> has been deleted or is not accessible
- 文件 <b>"{0}"</b> 已被删除或不可访问
-
-
- The file <b>"{0}"</b> has been changed and reloaded
- 文件 <b>"{0}"</b> 已改变和重新加载
-
-
- The file <b>"{0}"</b> is read only, please save to different file first.
- 文件 <b>"{0}"</b> 只读，请先另存为其他文件.
-
-
- The file {0} could not be opened. Error: {1}
-
- 文件{0}无法打开.错误：{1}
-
-
-
- Untitled-{0}
- 无标题-{0}
-
-
- The file <b>'{0}'</b> has been modified, save changes?
- 文件<b>'{0}'已被修改，是否保存修改？
-
-
- Unable to restore the file:
-{0}
-
- 无法打开文件：
-{0}
-
-
-
- Python {0} on {1}
-## Type help(iface) for more info and list of methods.
-
- ##输入help(iface)以了解更多算法信息.
-
-
-
- Run script
- 执行脚本
-
-
- Show editor
- 显示编辑器
+ Python Console
+ Python控制台
Clear console
@@ -9647,6 +7695,18 @@ Please change this situation first, because OSM Plugin doesn't know what la
Find Text
查找文件
+
+ Cut
+ 剪切
+
+
+ Copy
+ 复制
+
+
+ Paste
+ 粘帖
+
Comment
备注
@@ -9672,32 +7732,8 @@ Please change this situation first, because OSM Plugin doesn't know what la
设置
- Close Tab
-
-
- Close All
-
-
- Close Others
-
-
- Save As
- 另存为
-
-
- Import Processing class
- 导入处理算法类
-
-
- The file <b>{0}</b> could not be saved. Error: {1}
- 文件<b>{0}</b>无法保存.错误：{1}
-
-
- <b>"%1"</b> was not found.
- 找不到<b>"%1"</b>。
+ <b>"{0}"</b> was not found.
+ <b>"{0}"</b>未找到.
URL copied to clipboard.
@@ -9708,21 +7744,22 @@ Please change this situation first, because OSM Plugin doesn't know what la
连接错误：
- [Temporary file saved in %1]
- [临时文件保存在%1]
+ [Temporary file saved in {0}]
+ [临时文件保存在{0}]
- ## Script error: %1
- ## 脚本错误：%1
+ ## Script error: {0}
+ ##脚本作物：{0}
- ## Script executed successfully: %1
- ## 成功执行脚本：%1
+ ## Script executed successfully: {0}
+ ##脚本执行完毕：{0}
- Cannot execute file %1. Error: %2
+ Cannot execute file {0}. Error: {1}
- 无法执行文件%1。错误：%2
+ 无法执行文件{0}.错误：{1}
+
Hey, type something to run!
@@ -9732,22 +7769,6 @@ Please change this situation first, because OSM Plugin doesn't know what la
You have to save the file before running it.
文件在执行之前必须先保存。
-
- Syntax ok
- 语法正确无误
-
-
- The file <b>"%1"</b> has been deleted or is not accessible
- 文件<b>“%1”</b>已经删除或无法读取
-
-
- The file <b>"%1"</b> has been changed and reloaded
- 文件<b>“%1”</b>已经更新并重新载入
-
-
- The file <b>"%1"</b> is read only, please save to different file first.
- 文件<b>“%1”</b>是只读文件，请先以其他文件名保存。
-
Python Console: Save file
Python控制台：保存文件
@@ -9777,35 +7798,53 @@ Please change this situation first, because OSM Plugin doesn't know what la
新开编辑器
- The file %1 could not be opened. Error: %2
-
- 无法打开文件%1。错误：%2
+ Close Tab
+
- Untitled-%1
- 未命名—%1
+ Close All
+
+
+ Close Others
+
+
+ Save As
+
+
+ The file {0} could not be opened. Error: {1}
+
+ 文件{0}无法打开.错误：{1}
+
+
+
+ Untitled-{0}
+ 无标题-{0}
Python Console: Save File
Python控制台：保存文件
- The file <b>'%1'</b> has been modified, save changes?
- 文件<b>“%1”</b>已经更改，要保存吗？
+ The file <b>'{0}'</b> has been modified, save changes?
+ 文件<b>'{0}'已被修改，是否保存修改？
Unable to restore the file:
-%1
+{0}
- 无法还原文件：
-%1
+ 无法打开文件：
+{0}
+
- Python %1 on %2
+ Python {0} on {1}
## Type help(iface) for more info and list of methods.
- Python %1 于 %2
-## 输入help(iface)命令可查看更多信息及方法列表。
+ ##输入help(iface)以了解更多算法信息.
+
Hide/Show Toolbar
@@ -9823,14 +7862,34 @@ Please change this situation first, because OSM Plugin doesn't know what la
Object Inspector
象检查器
+
+ Open file
+ 打开文件
+
+
+ Save
+ 保存
+
Save As...
另存为...
+
+ Run script
+ 执行脚本
+
+
+ Show editor
+ 显示编辑器
+
Import Class
导入类
+
+ Import Processing class
+ 导入处理算法类
+
Enter text to find...
输入文本以查找...
@@ -9864,8 +7923,8 @@ Please change this situation first, because OSM Plugin doesn't know what la
保存出错
- The file <b>%1</b> could not be saved. Error: %2
- 文件<b>“%1”</b>无法保存。错误：%2
+ The file <b>{0}</b> could not be saved. Error: {1}
+ 文件<b>{0}</b>无法保存.错误：{1}
Save File As
@@ -9916,12 +7975,16 @@ Please change this situation first, because OSM Plugin doesn't know what la
移除API路径
- Manage Script
- 管理脚本
+ The file <b>"{0}"</b> has been deleted or is not accessible
+ 文件 <b>"{0}"</b> 已被删除或不可访问
- Import Sextante class
- 导入Sextante类
+ The file <b>"{0}"</b> has been changed and reloaded
+ 文件 <b>"{0}"</b> 已改变和重新加载
+
+
+ The file <b>"{0}"</b> is read only, please save to different file first.
+ 文件 <b>"{0}"</b> 只读，请先另存为其他文件.
Import PyQt.QtCore class
@@ -9931,14 +7994,6 @@ Please change this situation first, because OSM Plugin doesn't know what la
Import PyQt.QtGui class
导入PyQt.QtGui类
-
- Open script file
- 打开脚本文件
-
-
- Save to script file
- 保存到脚本文件
-
Run command
执行命令
@@ -9947,18 +8002,6 @@ Please change this situation first, because OSM Plugin doesn't know what la
Help
帮助
-
- Python Console
- Python控制台
-
-
- To access Quantum GIS environment from this console
-use qgis.utils.iface object (instance of QgisInterface class).
-
-
- 要想从这个控制台访问Quantum GIS环境，
-请使用qgis.utils.iface对象（QgisInterface类的实例）。
-
QGis::UnitType
@@ -9988,7 +8031,7 @@ use qgis.utils.iface object (instance of QgisInterface class).
nautical miles
-
@@ -10067,6 +8110,736 @@ use qgis.utils.iface object (instance of QgisInterface class).
QObject
+
+ Interpolating...
+ 正在插值...
+
+
+ Abort
+ 放弃
+
+
+ Building triangulation...
+ 正在三角化...
+
+
+ Estimating normal derivatives...
+ 正在评估正常的衍生品...
+
+
+ minidump written to %1
+ minidump保存为为%1
+
+
+ writing of minidump to %1 failed (%2)
+ 输出minidump为%1失败（%2）
+
+
+ creation of minidump to %1 failed (%2)
+ 创建minidump%1失败（%2）
+
+
+ Crash dumped
+ 废弃的Crash
+
+
+ QGIS starting in non-interactive mode not supported.
+You are seeing this message most likely because you have no DISPLAY environment variable set.
+
+ 不支持在非交互模式下启动QGIS。
+你看到了这个消息，最有可能是因为你有没有设置DISPLAY环境变量。
+
+
+ Deleted vertices
+ 删除顶点
+
+
+ Moved vertices
+ 移动顶点
+
+
+ No active vector layer
+ 没有活动矢量图层
+
+
+ To select features, choose a vector layer in the legend
+ 在图例中选择一个矢量图层方可选择要素
+
+
+ CRS Exception
+ 坐标参照系异常
+
+
+ Selection extends beyond layer's coordinate system.
+ 你的选择超出了图层的坐标系统。
+
+
+ Python is not enabled in QGIS.
+ QGIS未启用Python。
+
+
+ Plugins
+ 插件
+
+
+ Plugin "%1" is not compatible with this version of QGIS.
+It will be disabled.
+ 插件“%1”与当前版本的QGIS不兼容。
+将禁用该插件。
+
+
+ Loaded %1 (package: %2)
+ 已载入%1（包：%2）
+
+
+ Library name is %1
+
+ 库名为%1
+
+
+ Failed to load %1 (Reason: %2)
+ 载入%1失败（原因：%2）
+
+
+ Attempting to resolve the classFactory function
+
+ 正试图解析classFactory函数
+
+
+ Loaded %1 (Path: %2)
+ 已载入%1（路径：%2）
+
+
+ Error Loading Plugin
+ 载入插件时出错
+
+
+ There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
+%1.
+ 载入一个插件时出现错误。以下诊断信息或许可以帮助QGIS开发者解决该问题：
+%1。
+
+
+ Unable to find the class factory for %1.
+ 找不到%1的calss factory方法.
+
+
+ Plugin %1 did not return a valid type and cannot be loaded
+ %1插件未能返回有效类型，因此不能载入
+
+
+ Error when reading metadata of plugin %1
+ 读取插件%1的元数据时出错
+
+
+ Could not open CRS database %1
+Error(%2): %3
+ 无法打开坐标参照系数据库%1
+错误（%2）：%3
+
+
+ CRS
+ 坐标参照系
+
+
+ Generated CRS
+ A CRS automatically generated from layer info get this prefix for description
+ 生成坐标参照系
+
+
+ Saved user CRS [%1]
+ 已保存用户坐标参照系[%1]
+
+
+ Imported from GDAL
+ 从GDAL导入
+
+
+ Can't open database: %1
+ 无法打开数据库：%1
+
+
+ Caught a coordinate system exception while trying to transform a point. Unable to calculate line length.
+ 尝试转换一个点时捕获到坐标系统异常。无法计算线条长度。
+
+
+ Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
+ 尝试转换一个点时捕获到坐标系统异常。无法计算多边形面积或周长。
+
+
+ Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
+ 尝试转换一个点时捕获到坐标系统异常。无法计算多边形面积。
+
+
+ m²
+ 平方米
+
+
+ km²
+ 平方公里
+
+
+ ha
+ 公顷
+
+
+ m
+ 米
+
+
+ km
+ 公里
+
+
+ mm
+ 毫米
+
+
+ cm
+ 厘米
+
+
+ sq ft
+ 平方英尺
+
+
+ acres
+ 英亩
+
+
+ sq mile
+ 平方英里
+
+
+ foot
+ 英尺
+
+
+ feet
+ 英尺
+
+
+ mile
+ 英里
+
+
+ sq. NM
+
+
+ NM
+
+
+ sq.deg.
+ 平方度
+
+
+ degree
+ 度
+
+
+ degrees
+ 度
+
+
+ unknown
+ 未知
+
+
+ Cannot convert '%1' to double
+ 无法将“%1”转换为双精度型
+
+
+ Cannot convert '%1' to int
+ 无法将“%1”转换为整型
+
+
+ Cannot convert '%1' to DateTime
+ 无法将“%1”转换为日期时间
+
+
+ Cannot convert '%1' to Date
+ 无法将“%1”转换为日期
+
+
+ Cannot convert '%1' to Time
+ 无法将“%1”转换为时间
+
+
+ Cannot convert '%1' to Interval
+ 无法将“%1”转换为内建
+
+
+ Cannot convert '%1' to boolean
+ 无法将“%1”转换为布尔型
+
+
+ Domain max must be greater than domain min
+ 范围域的最大值必须大于最小值
+
+
+ Exponent must be greater than 0
+ 指数必须大于0
+
+
+ Invalid regular expression '%1': %2
+ 无效的正则表达式“%1”：%2
+
+
+ Index is out of range
+ 索引超出范围
+
+
+ Cannot convert '%1:%2:%3' to color
+ 无法将“%1:%2:%3”转换为颜色
+
+
+ Cannot convert '%1:%2:%3:%4' to color
+ 无法将“%1:%2:%3:%4”转换为颜色
+
+
+ "%1" is not a valid color ramp
+ “%1”不是合法的颜色梯度文件
+
+
+ Cannot convert '%1:%2:%3:%4:%5' to color
+ 无法将“%1:%2:%3:%4:%5”转换为颜色
+
+
+ function help for %1 missing
+ %1的帮助信息缺失
+
+
+ Operators
+ 操作符
+
+
+ Fields and Values
+ 字段和值
+
+
+ Math
+ 数学
+
+
+ Conversions
+ 转换
+
+
+ Conditionals
+ 条件
+
+
+ second|seconds
+ list of words separated by | which reference years
+
+
+ minute|minutes
+ list of words separated by | which reference minutes
+
+
+ hour|hours
+ list of words separated by | which reference minutes hours
+
+
+ day|days
+ list of words separated by | which reference days
+
+
+ week|weeks
+ wordlist separated by | which reference weeks
+
+
+ month|months
+ list of words separated by | which reference months
+
+
+ year|years
+ list of words separated by | which reference years
+
+
+ Date and Time
+ 日期和时间
+
+
+ String
+ 字符串
+
+
+ Color
+ 颜色
+
+
+ Geometry
+ 几何图形
+
+
+ Record
+ 记录
+
+
+ No root node! Parsing failed?
+ 无根节点！解析失败？
+
+
+ (no root)
+ （没有节点）
+
+
+ Unary minus only for numeric values.
+ 一元减号仅用于数值。
+
+
+ Can't preform /, *, or % on DateTime and Interval
+ 无法对日期时间和内建类型应用/、*或%
+
+
+ [unsupported type;%1; value:%2]
+ [不受支持的类型；%1；值：%2]
+
+
+ Column '%1' not found
+ 未找到列“%1”
+
+
+ Exception: %1
+ 异常：%1
+
+
+ GEOS
+ GEOS
+
+
+ GEOS prior to 3.2 doesn't support GEOSInterpolate
+ 低于3.2版的GEOS不支持GEOS插值（GEOSInterpolate）
+
+
+ segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
+ 多边形%3里面的环形%2中的线段%1，与多边形%6里面的环形%5中的线段%4在%7处相交
+
+
+ ring %1 with less than four points
+ 环形%1点数目少于四
+
+
+ ring %1 not closed
+ 环形%1不闭合
+
+
+ line %1 with less than two points
+ 线条%1点数目少于二
+
+
+ line %1 contains %n duplicate node(s) at %2
+ number of duplicate nodes
+ 线条%1在%2处包含%n个重复结点
+
+ segments %1 and %2 of line %3 intersect at %4
+ 线条%3中的线段%1和线段%2在%4处相交
+
+
+ ring %1 of polygon %2 not in exterior ring
+ 多边形%2的环形%1不在外部环形里面
+
+
+ GEOS error:could not produce geometry for GEOS (check log window)
+ GEOS错误：无法为GEOS生成几何图形（请检查日志窗口）
+
+
+ GEOS error:%1
+ GEOS错误：%1
+
+
+ polygon %1 has no rings
+ 多边形%1没有任何环
+
+
+ polygon %1 inside polygon %2
+ 多边形%1在多边形%2之内
+
+
+ Unknown geometry type
+ 未知的几何图形类型
+
+
+ Unknown geometry type %1
+ 未知的几何图形类型“%1”
+
+
+ Geometry validation was aborted.
+ 已放弃几何图形校验。
+
+
+ Geometry has %1 errors.
+ 几何图形有%1处错误。
+
+
+ Geometry is valid.
+ 几何图形有效。
+
+
+ invalid line
+ 无效线条
+
+
+ Label
+ 标签
+
+
+ Console
+ 控制台
+
+
+ infinite
+ 无穷
+
+
+ W
+ 西
+
+
+ E
+ 东
+
+
+ S
+ 南
+
+
+ N
+ 北
+
+
+ No QGIS data provider plugins found in:
+%1
+
+ 在
+%1
+找不到QGIS数据源插件
+
No vector layers can be loaded. Check your QGIS installation
@@ -10093,45 +8866,1100 @@ use qgis.utils.iface object (instance of QgisInterface class).
载入%1失败：%2
- Expected operator, got scalar value!
- 期望操作符，却得到标量值！
+ OGR driver for '%1' not found (OGR error: %2)
+ 未找到“%1”的OGR驱动（OGR错误：%2）
- Unknown operator: %1
- 未知操作符：%1
+ trimming attribute name '%1' to ten significant characters produces duplicate column name.
+ 将属性名称“%1”缩减为10个重要字符将产生重复的列名。
- Division by zero.
- 被0除。
+ creation of data source failed (OGR error:%1)
+ 数据源创建失败（OGR错误：%1）
- Unknown token: %1
- 未知令牌：%1
+ creation of layer failed (OGR error:%1)
+ 图层创建失败（OGR错误：%1）
- Expression error: %1
- 表达式错误：%1
+ unsupported type for field %1
+ 字段%1的类型不受支持
- Unknown error %1: %2
- 未知错误%1：%2
+ creation of field %1 failed (OGR error: %2)
+ 字段%1创建失败（OGR错误：%2）
- Index %1 out of range [0;%2[
- 索引%1超出了范围[0;%2]
+ created field %1 not found (OGR error: %2)
+ 未找到已创建的字段%1（OGR错误：%2）
- Operator doesn't match the argument types.
- 操作符与参数类型不匹配。
+ Invalid variant type for field %1[%2]: received %3 with type %4
+ 字段%1[%2]的变量类型无效：收到%3，其类型为%4
- Value '%1' is not numeric
- 值“%1”不是数字
+ OGR
+ OGR
- Label
- 标签
+ no available replacement for internal fieldname ogc_fid found
+ 未找到任何可用于替换内部字段名ogc_fid的名称
+
+
+ Reserved attribute name ogc_fid replaced with %1
+ 保留将要被%1替换的属性名ogc_fid
+
+
+ By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
+
+
+ Feature geometry not imported (OGR error: %1)
+ 未导入要素几何图形（OGR错误：%1）
+
+
+ Feature creation error (OGR error: %1)
+ 要素创建失败（OGR错误：%1）
+
+
+ Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
+ 绘制标识符为“%1”的要素时转换一个点失败。停止写入。（异常：%2）
+
+
+ Feature write errors:
+ 要素写入错误：
+
+
+ Stopping after %1 errors
+ %1个错误之后停止
+
+
+
+Only %1 of %2 features written.
+
+只写入了%2个要素中的%1个。
+
+
+ Arc/Info ASCII Coverage
+ Arc/Info ASCII覆盖范围
+
+
+ Atlas BNA
+ Atlas BNA
+
+
+ Comma Separated Value
+ 以逗号分隔的值
+
+
+ ESRI Shapefile
+ ESRI Shape文件
+
+
+ DBF file
+ DBF文件
+
+
+ FMEObjects Gateway
+ FME对象网关
+
+
+ New BNA files are created by the systems default line termination conventions. This may be overridden here.
+
+
+ BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
+
+
+ The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
+
+
+ Limit the number of coordinate pairs per line in multiline format.
+
+
+ Set the number of decimal for coordinates. Default value is 10.
+
+
+ By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
+
+
+ Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
+
+
+ Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
+
+
+ Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
+
+
+ set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
+
+
+ Set to YES to resize fields to their optimal size.
+
+
+ DBF File
+
+
+ Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
+
+
+ Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
+
+
+ GeoJSON
+ GeoJSON
+
+
+ whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
+
+
+ The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
+
+
+ If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
+
+
+ If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
+
+
+ XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
+
+
+ Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
+
+
+ GeoRSS
+ GeoRSS
+
+
+ If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
+
+
+ This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
+
+
+ This is the prefix for the application target namespace.
+
+
+ Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
+
+
+ Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
+
+
+ If not specified, GML2 will be used.
+
+
+ only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
+
+
+ only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
+
+
+ Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
+
+
+ Geography Markup Language [GML]
+ 地理标记语言 [GML]
+
+
+ Generic Mapping Tools [GMT]
+ 通用制图工具 [GMT]
+
+
+ By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
+
+
+ By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
+
+
+ If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
+
+
+ Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
+
+
+ Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
+
+
+ By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
+
+
+ GPS eXchange Format [GPX]
+ GPS交换文件 [GPX]
+
+
+ INTERLIS 1
+ INTERLIS 1
+
+
+ INTERLIS 2
+ INTERLIS 2
+
+
+ Allows you to specify the field to use for the KML <name> element.
+
+
+ Allows you to specify the field to use for the KML <description> element.
+
+
+ Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
+
+
+ Keyhole Markup Language [KML]
+ Keyhole标记语言[KML]
+
+
+ Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
+
+
+ Mapinfo TAB
+ Mapinfo选项
+
+
+ Mapinfo MIF
+ Mapinfo MIF
+
+
+ Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
+
+
+ Override the seed file to use.
+
+
+ Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
+
+
+ Indicates whether the color table should be copied from the seed file.
+
+
+ Override the master unit name from the seed file with the provided one or two character unit name.
+
+
+ Override the sub unit name from the seed file with the provided one or two character unit name.
+
+
+ Override the number of subunits per master unit. By default the seed file value is used.
+
+
+ Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
+
+
+ ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
+
+
+ Microstation DGN
+ Microstation DGN
+
+
+ Should update files be incorporated into the base data on the fly.
+
+
+ Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
+
+
+ Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
+
+
+ If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
+
+
+ Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
+
+
+ Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
+
+
+ Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
+
+
+ S-57 Base file
+ S-57基文件
+
+
+ Spatial Data Transfer Standard [SDTS]
+ 空间数据传输标准 [SDTS]
+
+
+ Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
+
+
+ Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
+
+
+ Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
+
+
+ column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
+
+
+ By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
+
+
+ Field separator character.
+
+
+ Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
+
+
+ Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
+
+
+ SQLite
+ SQLite
+
+
+ Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
+
+
+ If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
+
+
+ If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
+
+
+ Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
+
+
+ SpatiaLite
+ SpatiaLite
+
+
+ AutoCAD DXF
+ AutoCAD DXF
+
+
+ Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
+
+
+ Geoconcept
+ 地理概念
+
+
+ When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
+
+
+ Set name of geometry column in new layer. Defaults to 'SHAPE'.
+
+
+ Name of the OID column to create. Defaults to 'OBJECTID'.
+
+
+ ESRI FileGDB
+ ESRI FileGDB
+
+
+ Cannot overwrite a OGR layer in place
+
+
+ Failed to transform, writing stopped. (Exception: %1)
+ 转换失败，停止写入。（异常：%1）
+
+
+ Unable to load %1 provider
+ 无法载入%1数据源
+
+
+ Provider %1 has no %2 method
+ 数据源%1没有%2方法
+
+
+ Loaded from Provider
+ 已从数据源载入
+
+
+ Loading of layer failed
+ 图层载入失败
+
+
+ Creation error for features from #%1 to #%2. Provider errors was:
+%3
+ 从#%1到#%2创建要素失败.提供者错误为：
+%3
+
+
+ Import was canceled at %1 of %2
+ 共有%2个待导入，当导入到%1个时放弃了导入
+
+
+ Vector import
+ 导入矢量
+
+
+ Only %1 of %2 features written.
+ 只写入了%2个要素中的%1个。
+
+
+ Reading raster part %1 of %2
+ 正在读取栅格第%1部分，共%2部分
+
+
+ Building Pyramids...
+ 正在构建金字塔...
+
+
+ Building pyramids failed - write access denied
+ 构建金字塔失败 - 写入访问被拒绝
+
+
+ Write access denied. Adjust the file permissions and try again.
+ 写入访问被拒绝。请调整文件权限再重试。
+
+
+ Building pyramids failed.
+ 构建金字塔失败。
+
+
+ The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
+ 该文件不可写。一些格式不支持金字塔概貌。如有疑问请查阅GDAL文档。
+
+
+ Building pyramid overviews is not supported on this type of raster.
+ 此类栅格不支构建金字塔概貌。
+
+
+ Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
+ 用JPEG压缩的栅格图层和当前的libtiff库不支持构建内建金字塔概貌。
+
+
+ Multiband color
+ 多波段彩色
+
+
+ Paletted
+ 调色板
+
+
+ Singleband gray
+ 单波段灰度
+
+
+ Singleband pseudocolor
+ 单波段伪彩色
+
+
+ Singleband color data
+ 单波段彩色数据
+
+
+ All Ramps
+ 全部颜色渐变
+
+
+ Single Symbol
+ 单一符号
+
+
+ Categorized
+ 已分类
+
+
+ Graduated
+ 渐进
+
+
+ Rule-based
+ 基于规则
+
+
+ Point displacement
+ 点的位移
+
+
+ Inverted polygons
+
+
+ Simple line
+ 简单线条
+
+
+ Marker line
+ 标记线
+
+
+ Simple marker
+ 简单标记
+
+
+ SVG marker
+ SVG标记
+
+
+ Font marker
+ 文字符号标记
+
+
+ Ellipse marker
+ 椭圆标记
+
+
+ Vector Field marker
+ 矢量字段标记
+
+
+ Simple fill
+ 简单填充
+
+
+ Gradient fill
+
+
+ Shapeburst fill
+
+
+ SVG fill
+ SVG填充
+
+
+ Centroid fill
+ 质心填充
+
+
+ Line pattern fill
+ 线条图案填充
+
+
+ Point pattern fill
+ 点图案填充
+
+
+ Where is '%1' (original location: %2)?
+ “%1”在哪里（原始位置：%2）？
+
+
+ QGIS rocks!
+ QGIS真棒！
+
+
+ <html>QGIS rocks!</html>
+ <html>QGIS真棒！</html>
+
+
+ Raster Histogram
+ 栅格柱状图
+
+
+ Pixel Value
+ 像素值
+
+
+ Frequency
+ 频率
+
+
+ Internal Compass
+ 内建罗盘
+
+
+ Shows a QtSensors compass reading
+ 显示QtSensors罗盘读数
+
+
+ Version 0.9
+ 版本 0.9
+
+
+ Coordinate Capture
+ 撷取坐标
+
+
+ Capture mouse coordinates in different CRS
+ 撷取鼠标指针位置处各种不同坐标参照系下的坐标值
+
+
+ Vector
+ 矢量
+
+
+ Version 0.1
+ 版本 0.1
+
+
+ Version 0.2
+ 版本 0.2
+
+
+ Layers
+ 图层
+
+
+ Dxf2Shp Converter
+ Dxf2Shp转换器
+
+
+ Converts from dxf to shp file format
+ 将dxf格式转换为shp文件格式
+
+
+ eVis
+ eVis
+
+
+ An event visualization tool - view images associated with vector features
+ 一个事件可视化工具——查看与矢量要素关联的位图
+
+
+ Database
+ 数据库
+
+
+ Version 1.1.0
+ 版本 1.1.0
+
+
+ Warning
+ 警告
+
+
+ This tool only supports vector data
+ 这个工具只支持矢量数据
+
+
+ No active layers found
+ 未找到活动图层
+
+
+ Georeferencer GDAL
+ GDAL配准
+
+
+ Georeferencing rasters using GDAL
+ 使用GDAL配准栅格影像
+
+
+ Raster
+ 栅格
+
+
+ Could not reproject view extent: %1
+
+
+ Could not reproject layer extent: %1
+
+
+ Version 3.1.9
+ 版本 3.1.9
作投影变换至少需要四个对应点。
- GPS eXchange format provider
- GPS交换文件数据源
+ Globe
+ 地球仪
- Caught a coordinate system exception while trying to transform a point. Unable to calculate line length.
- 尝试转换一个点时捕获到坐标系统异常。无法计算线条长度。
-
-
- Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area.
- 尝试转换一个点时捕获到坐标系统异常。无法计算多边形面积。
-
-
- GRASS plugin
- GRASS插件
-
-
- QGIS couldn't find your GRASS installation.
-Would you like to specify path (GISBASE) to your GRASS installation?
- QGIS找不到GRASS。
-要指定GRASS的安装路径（GISBASE）吗？
-
-
- Choose GRASS installation path (GISBASE)
- 选择GRASS安装路径（GISBASE）
-
-
- GRASS data won't be available if GISBASE is not specified.
- 若不指定GISBASE，GRASS数据将不可用。
-
-
- Version 0.1
- 版本 0.1
-
-
- Version 0.2
- 版本 0.2
-
-
- Loads and displays delimited text files containing x,y coordinates
- 载入并显示以分隔符分割的、包含横坐标与纵坐标的文本文件
-
-
- Layers
- 图层
-
-
- Add Delimited Text Layer
- 添加以分隔符分割的文本数据图层
+ Overlay data on a 3D globe
+ 将数据叠加到三维地球仪上
载入和导入GPS数据的工具
- GRASS
- GRASS
+ Location: %1
+ 地点：%1
- GRASS layer
- GRASS图层
-
-
- SPIT
- SPIT
-
-
- Shapefile to PostgreSQL/PostGIS Import Tool
- Shape文件到PostgreSQL/PostGIS的导入工具
-
-
- Python error
- Python错误
-
-
- ha
- 公顷
-
-
- Can't open database: %1
- 无法打开数据库：%1
-
-
- Caught a coordinate system exception while trying to transform a point. Unable to calculate polygon area or perimeter.
- 尝试转换一个点时捕获到坐标系统异常。无法计算多边形面积或周长。
-
-
- m²
- 平方米
-
-
- km²
- 平方公里
-
-
- m
- 米
-
-
- km
- 公里
-
-
- mm
- 毫米
-
-
- cm
- 厘米
-
-
- acres
- 英亩
-
-
- sq mile
- 平方英里
-
-
- sq ft
- 平方英尺
-
-
- mile
- 英里
-
-
- foot
- 英尺
-
-
- feet
- 英尺
-
-
- sq. NM
-
-
- NM
-
-
- sq.deg.
- 平方度
-
-
- degree
- 度
-
-
- degrees
- 度
-
-
- unknown
- 未知
-
-
- Regular expressions on numeric values don't make sense. Use comparison instead.
- 正则表达式对数值没有意义。请换用比较。
+ Location: %1<br>Mapset: %2
+ 地点：%1<br>地图集：%2
Driver
驱动
-
- Database
- 数据库
-
Table
@@ -10578,440 +10208,6 @@ Would you like to specify path (GISBASE) to your GRASS installation?
Key column
键字段
-
- GISBASE is not set.
- 未设置GISBASE。
-
-
- Mapset is already in use.
- 地图集已在使用中。
-
-
- Warning
- 警告
-
-
- Cannot read raster map region
- 无法读取栅格地图区域
-
-
- Cannot read vector map region
- 无法读取矢量地图区域
-
-
- Cannot read region
- 无法读取区域
-
-
- Abort
- 放弃
-
-
- The extra plugin path '%1' does not exist !
-
-
- Couldn't load SIP module.
- 无法载入SIP模块。
-
-
- Python support will be disabled.
- Python支持将被禁用。
-
-
- Couldn't set SIP API versions.
- 无法设置SIP API版本.
-
-
- Couldn't load PyQt4.
- 无法载入PyQt4。
-
-
- Couldn't load PyQGIS.
- 无法载入PyQGIS。
-
-
- Python version:
- Python版本：
-
-
- QGIS version:
- QGIS版本：
-
-
- Python path:
- Python路径：
-
-
- An error occured during execution of following code:
- 执行以下代码时发生错误：
-
-
- Coordinate Capture
- 撷取坐标
-
-
- Capture mouse coordinates in different CRS
- 撷取鼠标指针位置处各种不同坐标参照系下的坐标值
-
-
- Vector
- 矢量
-
-
- Dxf2Shp Converter
- Dxf2Shp转换器
-
-
- Converts from dxf to shp file format
- 将dxf格式转换为shp文件格式
-
-
- Interpolating...
- 正在插值...
-
-
- Interpolation plugin
- 插值插件
-
-
- A plugin for interpolation based on vertices of a vector layer
- 一个依据矢量图层的顶点来插值的插件
-
-
- Version 0.001
- 版本 0.001
-
-
- Python is not enabled in QGIS.
- QGIS未启用Python。
-
-
- Plugins
- 插件
-
-
- Plugin "%1" is not compatible with this version of QGIS.
-It will be disabled.
- 插件“%1”与当前版本的QGIS不兼容。
-将禁用该插件。
-
-
- Loaded %1 (package: %2)
- 已载入%1（包：%2）
-
-
- Library name is %1
-
- 库名为%1
-
-
- Failed to load %1 (Reason: %2)
- 载入%1失败（原因：%2）
-
-
- Attempting to resolve the classFactory function
-
- 正试图解析classFactory函数
-
-
- Loaded %1 (Path: %2)
- 已载入%1（路径：%2）
-
-
- Error Loading Plugin
- 载入插件时出错
-
-
- There was an error loading a plugin.The following diagnostic information may help the QGIS developers resolve the issue:
-%1.
- 载入一个插件时出现错误。以下诊断信息或许可以帮助QGIS开发者解决该问题：
-%1。
-
-
- Unable to find the class factory for %1.
- 找不到%1的calss factory方法.
-
-
- Plugin %1 did not return a valid type and cannot be loaded
- %1插件未能返回有效类型，因此不能载入
-
-
- Where is '%1' (original location: %2)?
- “%1”在哪里（原始位置：%2）？
-
-
- Error when reading metadata of plugin %1
- 读取插件%1的元数据时出错
-
-
- No QGIS data provider plugins found in:
-%1
-
- 在
-%1
-找不到QGIS数据源插件
-
-
- Location: %1
- 地点：%1
-
-
- Location: %1<br>Mapset: %2
- 地点：%1<br>地图集：%2
-
-
- Couldn't open the data source: %1
- 无法打开数据源：%1
-
-
- Parse error at line %1 : %2
- 第%1行解析错误：%2
-
-
- Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
-
- %1 is not a GRASS mapset.
- %1不是GRASS地图集。
-
-
- Cannot start %1/etc/lock
- 无法启动 %1/etc/lock
-
-
- Temporary directory %1 exists but is not writable
- 临时目录%1已经存在但不可写
-
-
- Cannot create temporary directory %1
- 无法创建临时目录%1
-
-
- Cannot create %1
- 无法创建%1
-
-
- Cannot remove mapset lock: %1
- 无法移除地图集锁：%1
-
-
- Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
- 无法在地图集%2第二级别中打开矢量数据%1（无法获取矢量拓扑数据，请尝试用v.build模块重建拓扑关系）.
-
-
- Cannot open vector %1 in mapset %2
- 无法打开地图集%2中的矢量%1
-
-
- Cannot open GISRC file
- 无法打开GISRC文件
-
-
- Cannot start module
- 无法启动模块
-
-
- command: %1 %2
- 命令：%1 %2
-
-
- Cannot run module
- 无法运行模块
-
-
- command: %1 %2<br>%3<br>%4
- 命令：%1 %2<br>%3<br>%4
-
-
- Cannot get projection
- 无法获取投影
-
-
- Cannot get raster extent
- 无法获取栅格范围
-
-
- Cannot get map info
- 无法获取地图信息
-
-
- Cannot get colors
- 无法获取颜色
-
-
- Cannot query raster
- 无法查询栅格
-
-
- Georeferencer GDAL
- GDAL配准
-
-
- Georeferencing rasters using GDAL
- 使用GDAL配准栅格影像
-
-
- Raster
- 栅格
-
-
- Could not reproject view extent: %1
- 无法重新投影视图范围：%1
-
-
- Could not reproject layer extent: %1
-
-
- Version 3.1.9
- 版本 3.1.9
-
-
- Oracle Spatial GeoRaster
- Oracle Spatial GeoRaster
-
-
- Access Oracle Spatial GeoRaster
- 存取Oracle Spatial GeoRaster
-
-
- Deleted vertices
- 删除顶点
-
-
- Moved vertices
- 移动顶点
-
<b>Region</b>
@@ -11083,70 +10279,59 @@ It will be disabled.
南北向三维分辨率
- eVis
- eVis
+ GRASS
+ GRASS
- An event visualization tool - view images associated with vector features
- 一个事件可视化工具——查看与矢量要素关联的位图
+ GRASS layer
+ GRASS图层
- Version 1.1.0
- 版本 1.1.0
+ Heatmap
+ 热图
- This tool only supports vector data
- 这个工具只支持矢量数据
+ Creates a Heatmap raster for the input point vector
+ 为输入点矢量创建一个热图栅格
- No active layers found
- 未找到活动图层
+ Interpolation plugin
+ 插值插件
- Building triangulation...
- 正在三角化...
+ A plugin for interpolation based on vertices of a vector layer
+ 一个依据矢量图层的顶点来插值的插件
- Could not open CRS database %1
-Error(%2): %3
- 无法打开坐标参照系数据库%1
-错误（%2）：%3
+ Version 0.001
+ 版本 0.001
- CRS
- 坐标参照系
+ OfflineEditing
+ 离线编辑
- Generated CRS
- A CRS automatically generated from layer info get this prefix for description
- 生成坐标参照系
+ Allow offline editing and synchronizing with database
+ 允许离线编辑并与数据库同步
- Saved user CRS [%1]
- 已保存用户坐标参照系[%1]
+ Oracle Spatial GeoRaster
+ Oracle Spatial GeoRaster
- Imported from GDAL
- 从GDAL导入
+ Access Oracle Spatial GeoRaster
+ 存取Oracle Spatial GeoRaster
一个基于栅格数据的地形分析插件
- infinite
- 无穷
+ Road graph plugin
+ 路径图插件
- W
- 西
-
-
- E
- 东
-
-
- S
- 南
-
-
- N
- 北
-
-
- Couldn't load QGIS utils.
- 无法载入QGIS工具。
-
-
- Diagram Overlay
- 图表叠层
-
-
- Diagram Overlay (Legacy)
- 图表叠层（旧式）
-
-
- A plugin for placing diagrams on vector layers
- 一个可在矢量图层上放置图表的插件
-
-
- Version 0.0.1 (Legacy)
- 版本 0.0.1（旧式）
-
-
- Version 0.0.1
- 版本 0.0.1
-
-
- Estimating normal derivatives...
- 正在评估正常的衍生品...
-
-
- Single Symbol
- 单一符号
-
-
- Categorized
- 已分类
-
-
- Graduated
- 渐进
-
-
- Rule-based
- 基于规则
-
-
- Point displacement
- 点的位移
-
-
- Inverted polygons
-
-
- invalid line
- 无效线条
-
-
- segment %1 of ring %2 of polygon %3 intersects segment %4 of ring %5 of polygon %6 at %7
- 多边形%3里面的环形%2中的线段%1，与多边形%6里面的环形%5中的线段%4在%7处相交
-
-
- ring %1 with less than four points
- 环形%1点数目少于四
-
-
- ring %1 not closed
- 环形%1不闭合
-
-
- line %1 with less than two points
- 线条%1点数目少于二
-
-
- line %1 contains %n duplicate node(s) at %2
- number of duplicate nodes
-
- 线条%1在%2处包含%n个重复结点
-
-
-
- segments %1 and %2 of line %3 intersect at %4
- 线条%3中的线段%1和线段%2在%4处相交
-
-
- ring %1 of polygon %2 not in exterior ring
- 多边形%2的环形%1不在外部环形里面
-
-
- GEOS error:could not produce geometry for GEOS (check log window)
- GEOS错误：无法为GEOS生成几何图形（请检查日志窗口）
-
-
- GEOS error:%1
- GEOS错误：%1
-
-
- polygon %1 has no rings
- 多边形%1没有任何环
-
-
- polygon %1 inside polygon %2
- 多边形%1在多边形%2之内
-
-
- Unknown geometry type
- 未知的几何图形类型
-
-
- Unknown geometry type %1
- 未知的几何图形类型“%1”
-
-
- Geometry validation was aborted.
- 已放弃几何图形校验。
-
-
- Geometry is valid.
- 几何图形有效。
-
-
- Geometry has %1 errors.
- 几何图形有%1处错误。
-
-
- OGR driver for '%1' not found (OGR error: %2)
- 未找到“%1”的OGR驱动（OGR错误：%2）
-
-
- trimming attribute name '%1' to ten significant characters produces duplicate column name.
- 将属性名称“%1”缩减为10个重要字符将产生重复的列名。
-
-
- creation of data source failed (OGR error:%1)
- 数据源创建失败（OGR错误：%1）
-
-
- creation of layer failed (OGR error:%1)
- 图层创建失败（OGR错误：%1）
-
-
- unsupported type for field %1
- 字段%1的类型不受支持
-
-
- no available replacement for internal fieldname ogc_fid found
- 未找到任何可用于替换内部字段名ogc_fid的名称
-
-
- Reserved attribute name ogc_fid replaced with %1
- 保留将要被%1替换的属性名ogc_fid
-
-
- creation of field %1 failed (OGR error: %2)
- 字段%1创建失败（OGR错误：%2）
-
-
- created field %1 not found (OGR error: %2)
- 未找到已创建的字段%1（OGR错误：%2）
-
-
- By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
-
- By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
-
- Field separator character.
-
-
- Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
-
- Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
-
- Invalid variant type for field %1[%2]: received %3 with type %4
- 字段%1[%2]的变量类型无效：收到%3，其类型为%4
-
-
- Feature geometry not imported (OGR error: %1)
- 未导入要素几何图形（OGR错误：%1）
-
-
- Feature creation error (OGR error: %1)
- 要素创建失败（OGR错误：%1）
-
-
- Failed to transform a point while drawing a feature of type '%1'. Writing stopped. (Exception: %2)
- 绘制类型为“%1”的要素时转换一个点失败。停止写入。（异常：%2）
-
-
- Feature write errors:
- 要素写入错误：
-
-
- Stopping after %1 errors
- %1个错误之后停止
-
-
-
-Only %1 of %2 features written.
-
-只写入了%2个要素中的%1个。
-
-
- Arc/Info ASCII Coverage
- Arc/Info ASCII覆盖范围
-
-
- Atlas BNA
- Atlas BNA
-
-
- Comma Separated Value
- 以逗号分隔的值
-
-
- ESRI Shapefile
- ESRI Shape文件
-
-
- DBF file
- DBF文件
-
-
- FMEObjects Gateway
- FME对象网关
-
-
- New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
-
- BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
-
- The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
-
- Limit the number of coordinate pairs per line in multiline format.
-
-
- Set the number of decimal for coordinates. Default value is 10.
-
-
- By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
-
- Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
-
- Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
-
- Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
-
- set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
-
- Set to YES to resize fields to their optimal size.
-
-
- DBF File
-
-
- Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
-
- Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
-
- GeoJSON
- GeoJSON
-
-
- whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
-
- The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
-
- If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
-
- If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
-
- XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
-
- Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
-
- GeoRSS
- GeoRSS
-
-
- If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
-
- This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
-
- This is the prefix for the application target namespace.
-
-
- Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
-
- Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
-
- If not specified, GML2 will be used.
-
-
- only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
-
- only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
-
- Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
-
- Geography Markup Language [GML]
- 地理标记语言 [GML]
-
-
- Generic Mapping Tools [GMT]
- 通用制图工具 [GMT]
-
-
- By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
-
- By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
-
- If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
-
- Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
-
- Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
-
- By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
-
- GPS eXchange Format [GPX]
- GPS交换文件 [GPX]
-
-
- Allows you to specify the field to use for the KML <name> element.
-
-
- Allows you to specify the field to use for the KML <description> element.
-
-
- Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
-
- Keyhole Markup Language [KML]
- Keyhole标记语言[KML]
-
-
- Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
-
- Mapinfo TAB
- Mapinfo选项
-
-
- Mapinfo MIF
- Mapinfo MIF
-
-
- Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
-
- Override the seed file to use.
-
-
- Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
-
- Indicates whether the color table should be copied from the seed file.
-
-
- Override the master unit name from the seed file with the provided one or two character unit name.
-
-
- Override the sub unit name from the seed file with the provided one or two character unit name.
-
-
- Override the number of subunits per master unit. By default the seed file value is used.
-
-
- Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
-
- ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
-
- Should update files be incorporated into the base data on the fly.
-
-
- Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
-
- Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
-
- If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
-
- Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
-
- Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
-
- Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
-
- Spatial Data Transfer Standard [SDTS]
- 空间数据传输标准 [SDTS]
-
-
- Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
-
- Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
-
- Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
-
- column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
-
- Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
-
- If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
-
- If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
-
- Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
-
- SpatiaLite
- SpatiaLite
-
-
- Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
-
- When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
-
- Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
-
- Name of the OID column to create. Defaults to 'OBJECTID'.
-
-
- ESRI FileGDB
- ESRI FileGDB
-
-
- Cannot overwrite a OGR layer in place
-
-
- Failed to transform, writing stopped. (Exception: %1)
- 转换失败，停止写入。（异常：%1）
-
-
- INTERLIS 1
- INTERLIS 1
-
-
- Failed to transform a point while drawing a feature with ID '%1'. Writing stopped. (Exception: %2)
- 绘制标识符为“%1”的要素时转换一个点失败。停止写入。（异常：%2）
-
-
- INTERLIS 2
- INTERLIS 2
-
-
- Mapinfo File
- Mapinfo文件
-
-
- Microstation DGN
- Microstation DGN
-
-
- S-57 Base file
- S-57基文件
-
-
- SQLite
- SQLite
-
-
- AutoCAD DXF
- AutoCAD DXF
-
-
- Geoconcept
- 地理概念
-
-
- Cannot draw raster
- 无法绘制栅格
-
-
- CRS undefined - defaulting to project CRS
- 未指定坐标参照系——将使用默认坐标参照系
-
-
- CRS undefined - defaulting to default CRS: %1
- 未指定坐标参照系——将使用默认坐标参照系：%1
-
-
- To select features, choose a vector layer in the legend
- 在图例中选择一个矢量图层方可选择要素
-
-
- QGIS rocks!
- QGIS真棒！
-
-
- <html>QGIS rocks!</html>
- <html>QGIS真棒！</html>
+ It solves the shortest path problem.
+ 解决最短路径问题。
一个可在矢量图层上作空间查询的插件
- minidump written to %1
- minidump保存为为%1
+ SPIT
+ SPIT
- writing of minidump to %1 failed (%2)
- 输出minidump为%1失败（%2）
-
-
- creation of minidump to %1 failed (%2)
- 创建minidump%1失败（%2）
-
-
- Crash dumped
- 废弃的Crash
-
-
- QGIS starting in non-interactive mode not supported.
-You are seeing this message most likely because you have no DISPLAY environment variable set.
-
- 不支持在非交互模式下启动QGIS。
-你看到了这个消息，最有可能是因为你有没有设置DISPLAY环境变量。
-
-
- Simple line
- 简单线条
-
-
- Marker line
- 标记线
-
-
- Line decoration
- 线条装饰
-
-
- Simple marker
- 简单标记
-
-
- SVG marker
- SVG标记
-
-
- Font marker
- 文字符号标记
-
-
- Ellipse marker
- 椭圆标记
-
-
- Vector Field marker
- 矢量字段标记
-
-
- Simple fill
- 简单填充
-
-
- Gradient fill
-
-
- Shapeburst fill
-
-
- SVG fill
- SVG填充
-
-
- Centroid fill
- 质心填充
-
-
- Line pattern fill
- 线条图案填充
-
-
- Point pattern fill
- 点图案填充
-
-
- No active vector layer
- 没有活动矢量图层
-
-
- To select features, you must choose a vector layer by clicking on its name in the legend
- 要选择要素，必须在图例中点击图层的名称选择一个矢量图层
-
-
- CRS Exception
- 坐标参照系异常
-
-
- Selection extends beyond layer's coordinate system.
- 你的选择超出了图层的坐标系统。
-
-
- Raster Histogram
- 栅格柱状图
-
-
- Pixel Value
- 像素值
-
-
- Frequency
- 频率
-
-
- OfflineEditing
- 离线编辑
-
-
- Allow offline editing and synchronizing with database
- 允许离线编辑并与数据库同步
-
-
- Road graph plugin
- 路径图插件
-
-
- It solves the shortest path problem.
- 解决最短路径问题。
+ Shapefile to PostgreSQL/PostGIS Import Tool
+ Shape文件到PostgreSQL/PostGIS的导入工具
+ SQL Anywhere plugin
- SQL Anywhere插件
+ SQL Anywhere插件
+ Store vector layers within a SQL Anywhere database
- 在SQL Anywhere数据库中存储矢量图层
+ 在SQL Anywhere数据库中存储矢量图层
+
+
+ Zonal statistics plugin
+ 分区统计插件
+
+
+ A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
+ 一个用于计算矢量图层中每个多边形的栅格的计数、求和及平均值的插件
+
+
+ Cannot open GDAL MEM dataset %1: %2
+ 无法打开GDAL MEM数据集%1：%2
+
+
+ Cannot GDALCreateGenImgProjTransformer:
+ 无法执行GDALCreateGenImgProjTransforme：
+
+
+ Cannot inittialize GDALWarpOperation :
+ 无法初始化GDAL重新投影操作：
+
+
+ Cannot ChunkAndWarpImage: %1
+ 无法执行ChunkAndWarpImage：%1
+
+
+ GDAL/OGR VSIFileHandler
+ GDAL/OGR VSIFileHandler
+
+
+ This raster file has no bands and is invalid as a raster layer.
+ 该栅格文件不包含任何波段，不能作为一个有效的栅格图层。
+
+
+ Cannot get GDAL raster band: %1
+ 无法获取GDAL栅格波段：%1
+
+
+ Nearest Neighbour
+ 近邻取样
+
+
+ Average
+ 平均值
+
+
+ Gauss
+ 高斯
+
+
+ Cubic
+ 立方卷积
+
+
+ Mode
+ 模式
+
+
+ None
+ 无
+
+
+ Couldn't open the data source: %1
+ 无法打开数据源：%1
+
+
+ Parse error at line %1 : %2
+ 第%1行解析错误：%2
+
+
+ GPS eXchange format provider
+ GPS交换文件数据源
+
+
+ GRASS plugin
+ GRASS插件
+
+
+ QGIS couldn't find your GRASS installation.
+Would you like to specify path (GISBASE) to your GRASS installation?
+ QGIS找不到GRASS。
+要指定GRASS的安装路径（GISBASE）吗？
+
+
+ Choose GRASS installation path (GISBASE)
+ 选择GRASS安装路径（GISBASE）
+
+
+ GRASS data won't be available if GISBASE is not specified.
+ 若不指定GISBASE，GRASS数据将不可用。
+
+
+ Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
+
+
+ GISBASE is not set.
+ 未设置GISBASE。
+
+
+ %1 is not a GRASS mapset.
+ %1不是GRASS地图集。
+
+
+ Cannot start %1/etc/lock
+ 无法启动 %1/etc/lock
+
+
+ Mapset is already in use.
+ 地图集已在使用中。
+
+
+ Temporary directory %1 exists but is not writable
+ 临时目录%1已经存在但不可写
+
+
+ Cannot create temporary directory %1
+ 无法创建临时目录%1
+
+
+ Cannot create %1
+ 无法创建%1
+
+
+ Cannot remove mapset lock: %1
+ 无法移除地图集锁：%1
+
+
+ Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
+ 无法在地图集%2第二级别中打开矢量数据%1（无法获取矢量拓扑数据，请尝试用v.build模块重建拓扑关系）.
+
+
+ Cannot open vector %1 in mapset %2
+ 无法打开地图集%2中的矢量%1
+
+
+ Cannot read raster map region
+ 无法读取栅格地图区域
+
+
+ Cannot read vector map region
+ 无法读取矢量地图区域
+
+
+ Cannot read region
+ 无法读取区域
+
+
+ Cannot open GISRC file
+ 无法打开GISRC文件
+
+
+ Cannot start module
+ 无法启动模块
+
+
+ command: %1 %2
+ 命令：%1 %2
+
+
+ Cannot run module
+ 无法运行模块
+
+
+ command: %1 %2<br>%3<br>%4
+ 命令：%1 %2<br>%3<br>%4
+
+
+ Cannot get projection
+ 无法获取投影
+
+
+ Cannot get raster extent
+ 无法获取栅格范围
+
+
+ Cannot get map info
+ 无法获取地图信息
+
+
+ Cannot get colors
+ 无法获取颜色
+
+
+ Cannot query raster
+ 无法查询栅格
+
+
+ Cannot draw raster
+ 无法绘制栅格
+
+
+ Loading of the MSSQL provider failed
+ MSSQL数据源载入失败
+
+
+ Unsupported type for field %1
+ 字段%1的类型不受支持
+
+
+ Creation of fields failed
+ 字段创建失败
OGR[%1] error %2: %3
OGR[%1]错误%2：%3
-
- OGR
- OGR
-
Unable to create the datasource. %1 exists and overwrite flag is false.
@@ -12303,6 +10724,11 @@ You are seeing this message most likely because you have no DISPLAY environment
DODS
DODS
+
+ OpenFileGDB
+
GeoPackage
-
Ingres
互动式图像和检索系统
+
+ Mapinfo File
+ Mapinfo文件
+
MySQL
@@ -12364,11 +10795,6 @@ You are seeing this message most likely because you have no DISPLAY environment
OGDI Vectors
OGDI矢量
-
- OpenFileGDB
-
PostgreSQL
@@ -12377,17 +10803,17 @@ You are seeing this message most likely because you have no DISPLAY environment
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
无法创建文件%1.qpj
- Cannot get GDAL raster band: %1
- 无法获取GDAL栅格波段：%1
-
-
- Cannot open GDAL MEM dataset %1: %2
- 无法打开GDAL MEM数据集%1：%2
-
-
- Cannot GDALCreateGenImgProjTransformer:
- 无法执行GDALCreateGenImgProjTransforme：
-
-
- Cannot inittialize GDALWarpOperation :
- 无法初始化GDAL重新投影操作：
-
-
- Cannot ChunkAndWarpImage: %1
- 无法执行ChunkAndWarpImage：%1
-
-
- [GDAL] All files (*)
- [GDAL] 全部文件 (*)
-
-
- GDAL/OGR VSIFileHandler
- GDAL/OGR VSIFileHandler
-
-
- This raster file has no bands and is invalid as a raster layer.
- 该栅格文件不包含任何波段，不能作为一个有效的栅格图层。
-
-
- Nearest Neighbour
- 近邻取样
-
-
- Average
- 平均值
-
-
- Gauss
- 高斯
-
-
- Cubic
- 立方卷积
-
-
- Mode
- 模式
-
-
- None
- 无
-
-
- day
- Note: Word is part matched in code
- 天
-
-
- days
- Note: Word is part matched in code
- 天
-
-
- week
- Note: Word is part matched in code
- 星期
-
-
- weeks
- Note: Word is part matched in code
- 星期
-
-
- month
- Note: Word is part matched in code
- 月
-
-
- months
- Note: Word is part matched in code
- 月
-
-
- year
- Note: Word is part matched in code
- 年
-
-
- years
- Note: Word is part matched in code
- 年
-
-
- second
- Note: Word is part matched in code
- 秒
-
-
- seconds
- Note: Word is part matched in code
- 秒
-
-
- minute
- Note: Word is part matched in code
- 分
-
-
- minutes
- Note: Word is part matched in code
- 分
-
-
- hour
- Note: Word is part matched in code
- 时
-
-
- hours
- Note: Word is part matched in code
- 时
-
-
- Cannot convert '%1' to double
- 无法将“%1”转换为双精度型
-
-
- Cannot convert '%1' to int
- 无法将“%1”转换为整型
-
-
- Cannot convert '%1' to DateTime
- 无法将“%1”转换为日期时间
-
-
- Cannot convert '%1' to Date
- 无法将“%1”转换为日期
-
-
- Cannot convert '%1' to Time
- 无法将“%1”转换为时间
-
-
- Cannot convert '%1' to Interval
- 无法将“%1”转换为内建
-
-
- Cannot convert '%1' to boolean
- 无法将“%1”转换为布尔型
-
-
- Domain max must be greater than domain min
- 范围域的最大值必须大于最小值
-
-
- Exponent must be greater than 0
- 指数必须大于0
-
-
- Invalid regular expression '%1': %2
- 无效的正则表达式“%1”：%2
-
-
- Index is out of range
- 索引超出范围
-
-
- Cannot convert '%1:%2:%3' to color
- 无法将“%1:%2:%3”转换为颜色
-
-
- Cannot convert '%1:%2:%3:%4' to color
- 无法将“%1:%2:%3:%4”转换为颜色
-
-
- "%1" is not a valid color ramp
- “%1”不是合法的颜色梯度文件
-
-
- Cannot convert '%1:%2:%3:%4:%5' to color
- 无法将“%1:%2:%3:%4:%5”转换为颜色
-
-
- function help for %1 missing
- %1的帮助信息缺失
-
-
- Operators
- 操作符
-
-
- Fields and Values
- 字段和值
-
-
- Math
- 数学
-
-
- Conversions
- 转换
-
-
- Conditionals
- 条件
-
-
- Date and Time
- 日期和时间
-
-
- Date/Time
- 日期/时间
-
-
- String
- 字符串
-
-
- Color
- 颜色
-
-
- Geometry
- 几何图形
-
-
- Record
- 记录
-
-
- No root node! Parsing failed?
- 无根节点！解析失败？
-
-
- second|seconds
- list of words separated by | which reference years
-
-
- minute|minutes
- list of words separated by | which reference minutes
-
-
- hour|hours
- list of words separated by | which reference minutes hours
-
-
- day|days
- list of words separated by | which reference days
-
-
- week|weeks
- wordlist separated by | which reference weeks
-
-
- month|months
- list of words separated by | which reference months
-
-
- year|years
- list of words separated by | which reference years
-
-
- (no root)
- （没有节点）
-
-
- Unary minus only for numeric values.
- 一元减号仅用于数值。
-
-
- Can't preform /, *, or % on DateTime and Interval
- 无法对日期时间和内建类型应用/、*或%
-
-
- [unsupported type;%1; value:%2]
- [不受支持的类型；%1；值：%2]
-
-
- Column '%1' not found
- 未找到列“%1”
-
-
- Unable to load %1 provider
- 无法载入%1数据源
-
-
- Provider %1 has no %2 method
- 数据源%1没有%2方法
-
-
- Loaded from Provider
- 已从数据源载入
-
-
- Provider %1 has no createEmptyLayer method
- 数据源%1没有createEmptyLayer（创建空图层）方法
-
-
- Loading of layer failed
- 图层载入失败
-
-
- Creation error for features from #%1 to #%2. Provider errors was:
-%3
- 从#%1到#%2创建要素失败.提供者错误为：
-%3
-
-
- Import was canceled at %1 of %2
- 共有%2个待导入，当导入到%1个时放弃了导入
-
-
- Vector import
- 导入矢量
-
-
- Only %1 of %2 features written.
- 只写入了%2个要素中的%1个。
-
-
- Globe
- 地球仪
-
-
- Overlay data on a 3D globe
- 将数据叠加到三维地球仪上
-
-
- Zonal statistics plugin
- 分区统计插件
-
-
- A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
- 一个用于计算矢量图层中每个多边形的栅格的计数、求和及平均值的插件
-
-
- no result buffer
- 没有结果缓冲
+ Fetching features failed.
+SQL:%1
+Error: %2
+ 获取要素失败。
+SQL：%1
+错误：%2
+
+
+ Oracle
+ Oracle
Unable to determine number of geometry columns of layer %1.%2:
%3
无法判别图层%1.%2的几何属性个数：
-%3
-
-
- Unable determine number of geometry columns of layer %1.%2:
-%3
- 无法确定图层%1 %2 的几何字段数目：
%3
@@ -12955,6 +10956,31 @@ You are seeing this message most likely because you have no DISPLAY environment
无法清理元数据%1 %2：
%3
+
+ no result buffer
+ 没有结果缓冲
+
+
+ Fetching from cursor %1 failed
+Database error: %2
+ 游标%1处获取失败
+数据库错误：%2
+
+
+ PostGIS
+ PostGIS
+
+
+ Infinite filter rectangle specified
+
表“%1”包含一致性错误。样式标识符应该是唯一的
- Loading of the MSSQL provider failed
- MSSQL数据源载入失败
+ SQLite error: %2
+SQL: %1
+ SQLite错误：%2
+SQL：%1
- Unsupported type for field %1
- 字段%1的类型不受支持
-
-
- Creation of fields failed
- 字段创建失败
+ SQLite error getting feature: %1
+ 获取要素时SQLite发生错误：%1
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
- Internal Compass
- 内建罗盘
+ The extra plugin path '%1' does not exist !
+
- Shows a QtSensors compass reading
- 显示QtSensors罗盘读数
+ Couldn't load SIP module.
+ 无法载入SIP模块。
- Version 0.9
- 版本 0.9
+ Python support will be disabled.
+ Python支持将被禁用。
- Heatmap
- 热图
+ Couldn't set SIP API versions.
+ 无法设置SIP API版本.
- Creates a Heatmap raster for the input point vector
- 为输入点矢量创建一个热图栅格
+ Couldn't load PyQt4.
+ 无法载入PyQt4。
- Exception: %1
- 异常：%1
+ Couldn't load PyQGIS.
+ 无法载入PyQGIS。
- GEOS
- GEOS
+ Couldn't load QGIS utils.
+ 无法载入QGIS工具。
- GEOS prior to 3.2 doesn't support GEOSInterpolate
- 低于3.2版的GEOS不支持GEOS插值（GEOSInterpolate）
+ An error occured during execution of following code:
+ 执行以下代码时发生错误：
- Console
- 控制台
+ Python version:
+ Python版本：
- Paletted
- 调色板
+ QGIS version:
+ QGIS版本：
- Multiband color
- 多波段彩色
+ Python path:
+ Python路径：
- Singleband pseudocolor
- 单波段伪彩色
-
-
- Singleband gray
- 单波段灰度
-
-
- Singleband color data
- 单波段彩色数据
-
-
- Reading raster part %1 of %2
- 正在读取栅格第%1部分，共%2部分
-
-
- Building Pyramids...
- 正在构建金字塔...
-
-
- Building pyramids failed - write access denied
- 构建金字塔失败 - 写入访问被拒绝
-
-
- Write access denied. Adjust the file permissions and try again.
- 写入访问被拒绝。请调整文件权限再重试。
-
-
- Building pyramids failed.
- 构建金字塔失败。
-
-
- The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
- 该文件不可写。一些格式不支持金字塔概貌。如有疑问请查阅GDAL文档。
-
-
- Building pyramid overviews is not supported on this type of raster.
- 此类栅格不支构建金字塔概貌。
-
-
- Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
- 用JPEG压缩的栅格图层和当前的libtiff库不支持构建内建金字塔概貌。
+ Python error
+ Python错误
Symbol label
符号标签
-
- Attribute index %1 out of bounds [0;%2[
- 属性索引%1超出了边界[0;%2]
-
-
- All Ramps
- 全部颜色渐变
-
Topology Checker
@@ -13434,74 +11346,14 @@ You are seeing this message most likely because you have no DISPLAY environment
多部件要素
- Delimited text
- 以分隔符分割的文本
-
-
- Memory provider
- 内存数据源
-
-
- Fetching features failed.
-SQL:%1
-Error: %2
- 获取要素失败。
-SQL：%1
-错误：%2
-
-
- Oracle
- Oracle
-
-
- Fetching from cursor %1 failed
-Database error: %2
- 游标%1处获取失败
-数据库错误：%2
-
-
- PostGIS
- PostGIS
-
-
- Infinite filter rectangle specified
-
-
- Trying to fetch geometry on a layer without geometry.
- 尝试为缺乏几何属性的图层获取几何属性.
-
-
- SQLite error: %2
-SQL: %1
- SQLite错误：%2
-SQL：%1
-
-
- SQLite error getting feature: %1
- 获取要素时SQLite发生错误：%1
-
-
+ Error describing bind parameters
- 描述绑定参数时发生错误
+ 描述绑定参数时发生错误
+ Error binding parameters
- 绑定参数时出错
-
-
- WFS
- WFS
+ 绑定参数时出错
Feature ID
要素ID
-
- empty response
- 空的响应
-
-
- WFS service exception:%1
- WFS服务异常：%1
-
-
- unsuccessful service response: %1
- 不成功的服务响应：%1
-
-
- WFS exception report (code=%1 text=%2)
- WFS异常报告（code=%1 text=%2）
-
-
- missing
- 确实
-
-
- unhandled response: %1
- 未处理的异常响应：%1
-
linear
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
- 空的性能文档
+
Dom Exception
- Dom异常
+
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
- 可在列的类型里面使用的带值的组合框。须受数据源支持。
+
Simplifies file selection by adding a file chooser dialog.
- 通过添加一个文件选择对话框来简化文件选择方式。
+
A hidden attribute will be invisible - the user is not able to see it's contents.
- 隐藏属性将不可见——用户不能看到其内容。
+
Read-only field that generates a UUID if empty.
- 只读字段，若为空则生成唯一识别码（UUID）。
-
-
- Legend
- 图例
+
QSpatiaLiteDriver
- Error opening database
打开数据库时出错
- Error closing database
关闭数据库时出错
- Unable to begin transaction
无法开始处理
- Unable to commit transaction
无法交付处理
- Unable to rollback transaction
无法回滚处理
@@ -13722,27 +11545,27 @@ Response was:
无查询
- Unable to execute statement
无法执行指令
- Unable to execute multiple statements at a time
无法一次执行多个指令
- Unable to reset statement
无法重置指令
- Unable to bind parameters
无法绑定参数
- Parameter count mismatch
参数计数不匹配
@@ -13833,229 +11656,19 @@ Response was:
QgisApp
- Layers
- 图层
+ &Raster
+ 栅格(&R)
- Version
- 版本
+ Multiple Instances of QgisApp
+ 多重QgisApp实例
- Invalid Data Source
- 无效的数据源
-
-
- Invalid Layer
- 无效的图层
-
-
- %1 is an invalid layer and cannot be loaded.
- %1是一个无效的图层，无法载入。
-
-
- Please select a vector layer first.
- 请先选择一个矢量图层。
-
-
- No Layer Selected
- 未选择图层
-
-
- Not enough features selected
- 没有选择到足够的要素
-
-
- Union operation canceled
- 已放弃合并操作
-
-
- No legend entries selected
-
-
- Select the layers and groups you want to remove in the legend.
-
-
- Remove layers and groups
-
-
- Remove %n legend entries?
- number of legend items to remove
-
-
-
-
- %n legend entries removed.
- number of removed legend entries
-
-
-
-
- %1 (%2 type unsupported)
- %1 （%2类型不支持）
-
-
- There is a new version of QGIS available
- QGIS有新版本
-
-
- You are running a development version of QGIS
- 您正在使用QGIS的开发版本
-
-
- You are running the current version of QGIS
- 您正在使用QGIS的当前版本
-
-
- Would you like more information?
- 您想了解更多的信息吗?
-
-
- QGIS Version Information
- QGIS版本信息
-
-
- Unable to get current version information from server
- 无法从服务器得到当前版本的信息
-
-
- Connection refused - server may be down
- 连接被拒绝 - 服务器可能出现故障
-
-
- QGIS server was not found
- 未找到QGIS服务器
-
-
- Problem deleting features
- 删除要素出错
-
-
- A problem occured during deletion of features
- 删除要素时发生错误
-
-
- No Vector Layer Selected
- 未选择矢量图层
-
-
- Deleting features only works on vector layers
- 删除要素只对矢量图层有效
-
-
- To delete features, you must select a vector layer in the legend
- 要删除要素，必须在图例中选择一个矢量图层
-
-
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
- 当前地图上显示的所有图层的图例。单击复选框显示或隐藏一个图层。在图例上双击一个图层来定制它的显示并设置其它的属性.
-
-
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
- 地图鹰眼图。这个区域用来显示一个定位图，它显示了地图视图的当前范围。当前范围以红色矩形框显示。地图上的任何一个图层都能够添加到鹰眼图中.
-
-
- Map canvas. This is where raster and vector layers are displayed when added to the map
- 地图显示区。这是栅格和矢量图层显示的地方
-
-
- &Plugins
- 插件(&P)
-
-
- Progress bar that displays the status of rendering layers and other time-intensive operations
- 进度条用来显示绘制图层的进度，以及其它一些耗时的操作的进度
-
-
- Displays the current map scale
- 显示当前的地图比例
-
-
- Render
- 渲染
-
-
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
- 当选中这一选项时，地图图层会在地图移动或其它一些事件中被渲染。不选中它，则不会进行渲染。这可以让您在渲染以前添加大量的图层并对它们进行符号化。
-
-
- QGis files (*.qgs)
- QGis文件(*.qgs)
-
-
- Choose a QGIS project file
- 选择一个QGIS项目文件
-
-
- Toggle map rendering
- 切换地图渲染
-
-
- QGIS Project Read Error
- QGIS项目读取错误
-
-
- Open a GDAL Supported Raster Data Source
- 打开一个GDAL支持的栅格数据源
-
-
- Save As
- 另存为
-
-
- Choose a QGIS project file to open
- 选择一个QGIS项目文件并打开
+ Checking database
+ 检查数据库
正在设置用户图形界面
- Checking database
- 检查数据库
+ Map canvas. This is where raster and vector layers are displayed when added to the map
+ 地图显示区。这是栅格和矢量图层显示的地方
- QGIS
- QGIS
+ Browser
+ 浏览器
- CRS undefined - defaulting to project CRS
- 未指定坐标参照系——将使用默认坐标参照系
+ Browser (2)
+ 浏览器（2）
- CRS undefined - defaulting to default CRS: %1
- 未指定坐标参照系——将使用默认坐标参照系：%1
+ GPS Information
+ GPS信息
- Multiple instances of QGIS application object detected.
-Please contact the developers.
-
- 检测到多个QGIS应用对象的实例。
-请联系开发者。
+ Log Messages
+ 日志消息
+
+
+ QGIS starting...
+ 正在启动QGIS...
+
+
+ Checking provider plugins
+ 正在检查数据源插件
+
+
+ Starting Python
+ 正在启动Python
QGIS就绪!
- &New Project
- 新建项目(&N)
-
-
- New Project
- 新建项目
-
-
- &Open Project...
- 打开项目(&O)...
-
-
- Open a Project
- 打开项目
-
-
- &Save Project
- 保存项目(&S)
-
-
- Save Project &As...
- 项目另存为(&A)...
-
-
- Save Project under a new name
- 以新名称保存项目
-
-
- Save as Image...
- 另存为位图...
-
-
- Save map as image
- 将地图另存为位图
-
-
- Exit
- 退出
-
-
- Exit QGIS
- 退出QGIS
-
-
- Add a Vector Layer
- 添加一个矢量图层
-
-
- Add a Raster Layer
- 添加栅格图层
-
-
- Add a PostGIS Layer
- 添加PostGIS图层
-
-
- Remove Layer
- 移除图层
-
-
- Remove a Layer
- 移除一个图层
-
-
- Show all layers in the overview map
- 在鹰眼图中显示所有图层
-
-
- Remove All From Overview
- 移除鹰眼图内所有的图层
-
-
- Remove all layers from overview map
- 移除鹰眼图内所有的图层
-
-
- Show All Layers
- 显示所有图层
-
-
- Show all layers
- 显示所有图层
-
-
- Hide All Layers
- 隐藏所有图层
-
-
- Hide all layers
- 隐藏所有图层
-
-
- Project Properties...
- 项目属性...
-
-
- Set project properties
- 设置项目属性
-
-
- Options...
- 选项...
-
-
- Change various QGIS options
- 改变QGIS选项
-
-
- Help Contents
- 帮助
-
-
- Help Documentation
- 帮助文档
-
-
- QGIS Home Page
- QGIS主页
-
-
- About
- 关于
-
-
- About QGIS
- 关于QGIS
-
-
- Check Qgis Version
- 检查QGIS版本
-
-
- Check if your QGIS version is up to date (requires internet access)
- 检查是否有新版本的QGIS (需要互联网接入)
-
-
- Refresh
- 刷新
-
-
- Refresh Map
- 刷新地图
-
-
- Zoom In
- 放大
-
-
- Zoom Out
- 缩小
-
-
- Zoom Full
- 全图显示
-
-
- Zoom to Full Extents
- 全图显示
-
-
- Pan Map
- 平移地图
-
-
- Pan the map
- 平移地图
-
-
- Zoom Last
- 回到上一视图
-
-
- Zoom to Last Extent
- 回到上一视图
-
-
- Zoom to Layer
- 缩放到图层范围
-
-
- Identify Features
- 识别要素
-
-
- Click on features to identify them
- 点击要素进行识别
-
-
- Select Features
- 选择要素
-
-
- Measure Line
- 测距
-
-
- Measure a Line
- 测量线的距离
-
-
- Measure Area
- 测量面积
-
-
- Measure an Area
- 测量面积
-
-
- Show Bookmarks
- 显示书签
-
-
- New Bookmark...
- 新的书签...
-
-
- New Bookmark
- 新的书签
-
-
- Add WMS/WMTS Layer...
- 添加WMS图层...
-
-
- Add current layer to overview map
- 将当前图层添加到鹰眼图中
-
-
- Open the plugin manager
- 打开插件管理器
-
-
- Capture Point
- 捕获点
-
-
- Capture Points
- 捕获点
-
-
- Capture Line
- 捕获线
-
-
- Capture Lines
- 捕获线
-
-
- Capture Polygon
- 捕获多边形
-
-
- Capture Polygons
- 捕获多边形
-
-
- Delete Selected
- 删除选中的记录
-
-
- Add Vertex
- 添加顶点
-
-
- Delete Vertex
- 删除顶点
-
-
- Move Vertex
- 移动顶点
-
-
- &File
- 文件(&F)
-
-
- &Open Recent Projects
- 打开最近的项目(&O)
-
-
- &View
- 视图(&V)
-
-
- &Layer
- 图层(&L)
-
-
- &Settings
- 设置(&S)
-
-
- &Help
- 帮助(&H)
-
-
- File
- 文件
-
-
- Manage Layers
- 管理图层
-
-
- Help
- 帮助
-
-
- Digitizing
- 数字化
-
-
- Map Navigation
- 地图浏览
-
-
- Attributes
- 属性
-
-
- Plugins
- 插件
-
-
- Ready
- 就绪
-
-
- Unable to open project
- 无法打开项目
-
-
- Layer is not valid
- 图层无效
-
-
- The layer is not a valid layer and can not be added to the map
- 该图层不是一个有效的图层，无法添加到地图中
-
-
- Save?
- 保存？
-
-
- Do you want to save the current project?
- 您是否要保存当前的项目？
-
-
- Unsupported Data Source
- 不支持的数据源
-
-
- Enter a name for the new bookmark:
- 新书签的名称:
-
-
- Error
- 错误
-
-
- Unable to create the bookmark. Your user database may be missing or corrupted
- 无法创建书签。您的用户数据库丢失或损坏
-
-
- Ctrl+N
- New Project
- Ctrl+N
-
-
- Ctrl+O
- Open a Project
- Ctrl+O
-
-
- Ctrl+S
- Save Project
- Ctrl+S
-
-
- Save Project
- 保存项目
-
-
- Ctrl+Q
- Exit QGIS
- Ctrl+Q
-
-
- Ctrl+D
- Remove a Layer
- Ctrl+D
-
-
- F1
- Help Documentation
- F1
-
-
- Ctrl+H
- QGIS Home Page
- Ctrl+H
-
-
- Ctrl+R
- Refresh Map
- Ctrl+R
-
-
- Ctrl+B
- New Bookmark
- Ctrl+B
-
-
- Checking provider plugins
- 正在检查数据源插件
-
-
- Starting Python
- 正在启动Python
-
-
- Provider does not support deletion
- 数据源不支持删除操作
-
-
- Data provider does not support deleting features
- 数据源不支持删除要素
-
-
- Layer not editable
- 图层不可编辑
-
-
- Scale
- 比例尺
-
-
- Current map scale (formatted as x:y)
- 当前地图的比例尺（x,y格式）
-
-
- Do you want to save the current project? %1
- 想要保存当前工程吗？%1
-
-
- Map coordinates at mouse cursor position
- 鼠标指针位置的地图坐标值
-
-
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
- 当前图层不可编辑。请在数字化工具栏中点选“开始编辑”。
-
-
- Invalid scale
- 无效的比例尺
-
-
- Current map scale
- 当前地图的比例尺
-
-
- Project file is older
- 项目文件的格式版本比较老
-
-
- <tt>Settings:Options:General</tt>
- Menu path to setting options
- <tt>设置：选项：通用</tt>
-
-
- Warn me when opening a project file saved with an older version of QGIS
- 当打开旧版格式的QGIS项目文件时警告我
-
-
- Overview
- 鹰眼图
-
-
- Stop map rendering
- 停止地图渲染
-
-
- Multiple Instances of QgisApp
- 多重QgisApp实例
-
-
- Multiple instances of Quantum GIS application object detected.
-Please contact the developers.
-
- 检测到多个Quantum GIS应用对象的实例。
-请联系开发者。
-
-
- Ctrl+X
- Ctrl+X
-
-
- Ctrl+C
- Ctrl+C
-
-
- Labeling
- 标志
-
-
- Ctrl+D
- Remove Layer(s)
- Ctrl+D
-
-
- Minimize
最小化
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
将活动窗口最小化到停靠区
- Zoom
缩放
- Toggles between a predefined size and the window size set by the user
在预设窗口大小与用户设定的窗口大小之间切换
- Bring All to Front
全部提升到顶层
- Bring forward all open windows
提升所有打开的窗口
- Current Edits
+ 当前编辑
+
+
+ Error
+ 错误
+
+
+ Failed to open Python console:
打开Python控制台时出现错误:
- Panels
- 面板
+ QGIS
+ QGIS
- Toolbars
- 工具栏
-
-
- Measure
- 测量
-
-
- &Window
- 窗口(&W)
-
-
- Toggle extents and mouse position display
- 切换范围和鼠标位置显示
-
-
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
- 此图标显示是否已启用动态坐标参照系转换功能。点击图标，便可在弹出的项目属性对话框中作更改。
-
-
- CRS status - Click to open coordinate reference system dialog
- 坐标参照系状态——点击打开坐标参照系对话框
-
-
- %1 doesn't have any layers
- %1不包含任何图层
-
-
- Select raster layers to add...
- 请选择要添加的栅格图层...
-
-
- Raster
- 栅格
-
-
- Select vector layers to add...
- 请选择要添加的矢量图层...
-
-
- Choose a file name to save the QGIS project file as
- 选择一个文件名以保存QGIS项目文件
-
-
- Choose a file name to save the map image as
- 选择一个文件名以保存地图位图文件
-
-
- Merge failed
- 合并失败
-
-
- An error occured during the merge operation
- 合并操作过程中发生错误
-
-
- Start editing failed
- 开始编辑失败
-
-
- Provider cannot be opened for editing
- 数据源不能以可写方式打开
-
-
- Stop editing
- 结束编辑
-
-
- Do you want to save the changes to layer %1?
- 你要将更改保存到图层%1吗？
-
-
- Problems during roll back
- 回滚时发生问题
-
-
- GPS Information
- GPS信息
-
-
- Log Messages
- 日志消息
-
-
- QGIS starting...
- 正在启动QGIS...
-
-
- Window
- 窗口
-
-
- Vect&or
- 矢量(&O)
-
-
- &Web
- 网络(&W)
-
-
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
- 显示鼠标指针当前位置的地图坐标。坐标值会随着鼠标指针移动连续改变。允许编辑设定地图的中心点位置。格式为纬度,经度或东,北
-
-
- Current map coordinate (lat,lon or east,north)
- 当前地图的坐标参照系（纬度、经度或东、北）
-
-
- Control rendering order
- 控制渲染顺序
-
-
- Map layer list that displays all layers in drawing order.
- 按绘图顺序显示所有图层的地图图层列表。
-
-
- Layer order
- 图层顺序
-
-
- [ERROR] Can not make qgis.db private copy
- [错误] 无法为qgis.db创建私有副本
-
-
- Compiled against GDAL/OGR
- 编译于GDAL/OGR版本
-
-
- Running against GDAL/OGR
- 运行于GDAL/OGR版本
-
-
- Cannot get MSSQL select dialog from provider.
- 无法从数据源获取MSSQL选择对话框。
-
-
- QGIS files
- QGIS文件
-
-
- To change brightness or contrast, you need to have a raster layer selected.
- 要更改亮度和对比度，你需要先选择栅格图层。
-
-
- en
- documentation language
- 英语
-
-
- http://qgis.org/de/site/forusers/commercial_support.html
- http://qgis.org/de/site/forusers/commercial_support.html
-
-
- The layer %1 is not a valid layer and can not be added to the map
- 图层%1不是一个有效的图层，不能添加到地图上
-
-
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
- 项目中有些图层正处于编辑模式且有未保存的编辑，这些编辑将不会被保存！
-
-
- Do you want to save the current project?%1
- 要保存当前项目吗？%1
-
-
- Map coordinates for the current view extents
- 当前视图范围的地图坐标
-
-
- Maptips require an active layer
- 地图提示要求有活动图层
-
-
- %n feature(s) selected on layer %1.
- number of selected features
-
- 图层%1上选中了%n个要素。
-
-
-
- Error adding valid layer to map canvas
- 添加有效图层到地图视图时失败
-
-
- Raster layer
- 栅格图层
-
-
- Do you really want to quit QGIS?
-
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
-
-
- This project file was saved by an older version of QGIS
- 这个项目文件是老版本的QGIS保存的
-
-
- Warning
- 警告
-
-
- This layer doesn't have a properties dialog.
- 这个图层没有属性对话框。
-
-
- Authentication required
- 需要认证
-
-
- Proxy authentication required
- 需要代理认证
-
-
- Quantum GIS - %1 ('%2')
- Quantum GIS - %1 ('%2')
-
-
- Browser
- 浏览器
-
-
- Browser (2)
- 浏览器（2）
+ Multiple instances of QGIS application object detected.
+Please contact the developers.
+
+ 检测到多个QGIS应用对象的实例。
+请联系开发者。
QGIS - %1（“%2”）
- Current Edits
- 当前编辑
+ Panels
+ 面板
- %1 is not a valid or recognized data source
- %1不是一个有效或可被识别的数据源
+ Toolbars
+ 工具栏
- Saved project to: %1
- 项目保存到: %1
+ Window
+ 窗口
- Unable to save project %1
- 无法保存项目%1
-
-
- Saved map image to %1
- 地图位图保存到%1
-
-
- Could not commit changes to layer %1
-
-Errors: %2
-
- 无法向图层%1提交更改
-
-错误：%2
-
-
- Unable to communicate with QGIS Version server
-%1
- 无法与QGIS版本服务器通信
-%1
-
-
- Current CRS: %1 (OTFR enabled)
- 当前坐标参照系：%1（OTFR已启用）
-
-
- Current CRS: %1 (OTFR disabled)
- 当前坐标参照系：%1（OTFR已禁用）
-
-
- %1 is not a valid or recognized raster data source
- %1不是一个有效或可被识别的栅格数据源
-
-
- %1 is not a supported raster data source
- %1不是一个受支持的栅格数据源
-
-
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
- <p>这是旧版的QGIS软件保存的项目文件。当你再次保存该项目文件时，QGIS会将其更新为最新版本。新版项目文件旧版本QGIS可能无法使用。<p>虽然QGIS开发者们都试图保持软件的向后兼容性，旧版项目文件的某些信息仍然可能会丢失。为了提高QGIS软件的质量，我们非常欢迎你在%3提交错误或漏洞报告。请务必附上你的旧版目文件，并说明你用来打开这个项目文件时发现错误的QGIS版本号。<p>若要在打开旧版项目文件时不显示此警告信息，请在菜单“%4”选项框“%5”上取消勾选即可。<p>项目文件版本：%1<br>当前QGIS软件版本：%2
-
-
- Delete features
- 删除要素
-
-
- Delete %n feature(s)?
- number of features to delete
-
- 确实要删除%n个要素？
-
-
-
- New
- 新建
-
-
- &Database
数据库(&D)
- Label
- 标签
+ &Web
+ 网络(&W)
+
+
+ Progress bar that displays the status of rendering layers and other time-intensive operations
+ 进度条用来显示绘制图层的进度，以及其它一些耗时的操作的进度
+
+
+ Toggle extents and mouse position display
+ 切换范围和鼠标位置显示
+
+
+ Coordinate:
+ 坐标：
+
+
+ Current map coordinate
+ 当前地图的坐标
+
+
+ Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
+ 显示鼠标指针当前位置的地图坐标。坐标值会随着鼠标指针移动连续改变。允许编辑设定地图的中心点位置。格式为纬度,经度或东,北
+
+
+ Current map coordinate (lat,lon or east,north)
+ 当前地图的坐标参照系（纬度、经度或东、北）
+
+
+ Scale
+ 比例尺
+
+
+ Current map scale
+ 当前地图的比例尺
+
+
+ Displays the current map scale
+ 显示当前的地图比例
+
+
+ Current map scale (formatted as x:y)
+ 当前地图的比例尺（x,y格式）
+
+
+ Render
+ 渲染
+
+
+ When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
+ 当选中这一选项时，地图图层会在地图移动或其它一些事件中被渲染。不选中它，则不会进行渲染。这可以让您在渲染以前添加大量的图层并对它们进行符号化。
+
+
+ Toggle map rendering
+ 切换地图渲染
+
+
+ This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
+ 此图标显示是否已启用动态坐标参照系转换功能。点击图标，便可在弹出的项目属性对话框中作更改。
+
+
+ CRS status - Click to open coordinate reference system dialog
+ 坐标参照系状态——点击打开坐标参照系对话框
+
+
+ Ready
+ 就绪
+
+
+ Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
+ 地图鹰眼图。这个区域用来显示一个定位图，它显示了地图视图的当前范围。当前范围以红色矩形框显示。地图上的任何一个图层都能够添加到鹰眼图中.
+
+
+ Overview
+ 鹰眼图
+
+
+ Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
+ 当前地图上显示的所有图层的图例。单击复选框显示或隐藏一个图层。在图例上双击一个图层来定制它的显示并设置其它的属性.
+
+
+ Layers
+ 图层
+
+
+ Map layer list that displays all layers in drawing order.
+ 按绘图顺序显示所有图层的地图图层列表。
+
+
+ Layer order
+ 图层顺序
私有的qgis.db
- Could not open qgis.db
- 无法打开qgis.db
-
-
- Migration of private qgis.db failed.
-%1
- 私有qgis.db迁移失败。
-%1
-
-
- Update of view in private qgis.db failed.
-%1
- 在私有的qgis.db中更新视图失败。
-%1
-
-
- < Blank >
< 空 >
- QGIS version
QGIS版本
- QGIS code revision
QGIS代码版本
- Compiled against Qt
编译于Qt版本
- Running against Qt
运行于Qt版本
- GEOS Version
- GEOS版本
+ Compiled against GDAL/OGR
+ 编译于GDAL/OGR版本
- Running against GDAL/OGR
+ 运行于GDAL/OGR版本
+
+
+ PostgreSQL Client Version
PostgreSQL客户端版本
- No support.
不支持。
- SpatiaLite Version
SpatiaLite版本
- QWT Version
QWT版本
- PROJ.4 Version
PROJ.4版本
- QScintilla2 Version
QScintilla2 版本
- This copy of QGIS writes debugging output.
该QGIS副本会写入调试输出信息。
- Select zip layers to add...
- 请选择要添加的zip图层...
+ %1 doesn't have any layers
+ %1不包含任何图层
- Invalid Data Source
+ 无效的数据源
+
+
+ %1 is not a valid or recognized data source
+ %1不是一个有效或可被识别的数据源
+
+
+ Vector
矢量
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
无法从数据源获取PostgreSQL选择对话框。
- %1 is an invalid layer - not loaded
%1是一个无效的图层——无法载入
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
%1是无效图层，因此无法载入。详情请查看<a href="#messageLog">消息日志</a>。
- QGIS files
+ QGIS文件
+
+
+ No legend entries selected
+
+
+ Select the layers and groups you want to remove in the legend.
+
+
+ Remove layers and groups
+
+
+ Remove %n legend entries?
+ number of legend items to remove
+
+
+ %n legend entries removed.
+ number of removed legend entries
+
+
+ %1 (%2 type unsupported)
+ %1 （%2类型不支持）
+
+
+ http://qgis.org/en/site/forusers/commercial_support.html
+
+
+ Do you want to save the current project? %1
+ 想要保存当前工程吗？%1
+
+
+ Invalid Layer
+ 无效的图层
+
+
+ SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
无法从数据源获取SpatiaLite选择对话框。
- Delimited Text
分隔文本文件
- Cannot get Delimited Text select dialog from provider.
无法从数据源获取分隔文本选择对话框。
- MSSQL
MSSQL
- Cannot get MSSQL select dialog from provider.
+ 无法从数据源获取MSSQL选择对话框。
+
+
+ Oracle
Oracle
- Cannot get Oracle select dialog from provider.
无法从数据源获取Oracle选择对话框。
- WMS
WMS
- Cannot get WMS select dialog from provider.
无法从数据源获取WMS选择对话框。
- WCS
WCS
- Cannot get WCS select dialog from provider.
无法从数据源获取WCS选择对话框。
- WFS
WFS
- Cannot get WFS select dialog from provider.
无法从数据源获取WFS选择对话框。
- Default failed to open: %1
打开默认项目失败：%1
- Default not found: %1
未找到默认项目：%1
- Open Template Project
打开模板项目
- Auto-open Project
自动打开项目
- Failed to open: %1
打开失败：%1
- Not valid project file: %1
无效的项目文件：%1
- Project failed to open: %1
打开项目失败：%1
- Default template has been reopened: %1
默认模板已经重新打开：%1
- File not found: %1
未找到文件：%1
- Calculating...
正在计算...
- Abort...
放弃...
- QGis files
- QGIS文件
+ Choose a QGIS project file to open
+ 选择一个QGIS项目文件并打开
- Loading project: %1
正在载入项目：%1
- Unable to open project
+ 无法打开项目
+
+
+ Security warning
安全警告
- project macros have been disabled.
项目中的宏已经被禁用。
- Enable macros
启用宏
- Project loaded
已载入项目
- Choose a QGIS project file
+ 选择一个QGIS项目文件
+
+
+ Saved project to: %1
+ 项目保存到: %1
+
+
+ Unable to save project %1
+ 无法保存项目%1
+
+
+ Choose a file name to save the QGIS project file as
+ 选择一个文件名以保存QGIS项目文件
+
+
+ Unable to load %1
无法载入 %1
- Choose a file name to save the map image as
+ 选择一个文件名以保存地图位图文件
+
+
+ Saved map image to %1
+ 地图位图保存到%1
+
+
+ Default system font substituted.
默认系统字体已被替换.
- Labeling
+ 标志
+
+
+ Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
图层<b><u>%1</u></b>的字体未找到（<i>%2</i>）.%3
- Open labeling dialog
打开标志窗口
@@ -15376,419 +12349,539 @@ Errors: %2
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
Classification
- 类别
+
Range
- 范围
+
Unique Values
-
File Name
- 文件名称
+
Value Map
-
Enumeration
- 枚举
+
Hidden
- 隐藏
+
Check Box
-
Text Edit
-
Value Relation
-
Uuid Generator
-
Photo
- 相片
+
Web View
-
Color
- 颜色
+
Relation Reference
-
Date/Time
- 日期/时间
+
- Compiled against GEOS
文件在GEOS上已编译
- Running against GEOS
在GEOS上运行
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
-
- The project file is not writable.
-
- DXF export completed
-
- DXF export failed
-
- Commit errors
提交错误
- Could not commit changes to layer %1
无法提高对图层%1的更改
- Errors: %1
错误：%1
- Show more
显示更多
- Labeling Options
标签选项
- Please select a vector layer first
请先选择一个矢量图层
- Layer labeling settings
图层标签设置
- Reading raster
读取栅格
- Cannot write raster error code: %1
无法写入栅格错误代码：%1
- Saving done
已保存
- Export to vector file has been completed
导出到矢量文件的操作已经完成
- Save error
保存出错
- Export to vector file failed.
Error: %1
保存到矢量文件的操作发生错误。
错误: %1
- No Layer Selected
+ 未选择图层
+
+
+ To delete features, you must select a vector layer in the legend
+ 要删除要素，必须在图例中选择一个矢量图层
+
+
+ No Vector Layer Selected
+ 未选择矢量图层
+
+
+ Deleting features only works on vector layers
+ 删除要素只对矢量图层有效
+
+
+ Provider does not support deletion
+ 数据源不支持删除操作
+
+
+ Data provider does not support deleting features
+ 数据源不支持删除要素
+
+
+ Layer not editable
+ 图层不可编辑
+
+
+ The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
+ 当前图层不可编辑。请在数字化工具栏中点选“开始编辑”。
+
+
+ No Features Selected
-
- The current layer has not selected features
-
- Features deleted
+ Delete features
删除要素
- %n feature(s) deleted.
- number of features deleted
-
-
+ Delete %n feature(s)?
+ number of features to delete
+ 确实要删除%n个要素？
- Features deleted
+ 删除要素
+
+
+ Problem deleting features
+ 删除要素出错
+
+
+ A problem occured during deletion of features
+ 删除要素时发生错误
+
+
+ %n feature(s) deleted.
+ number of features deleted
+
+
+ Merging features...
正在合并要素...
- Abort
放弃
- Create unique print composer title
创建唯一的打印版式标题
- (title generated if left empty)
（留空时生成的标题）
- Composer title
打印版式标题
- Title can not be empty!
标题不能为空！
- Title already exists!
标题已经存在！
- Composer %1
+ 版式 %1
+
+
+ copy
复制
- No active layer
没有活动图层
- No active layer found. Please select a layer in the layer list
没有找到活动图层。请在图层列表中选择一个图层
- Active layer is not vector
活动图层不是矢量图层
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
要素合并工具仅适用于矢量图层。请在图层列表中选择一个矢量图层
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
要素合并操作仅在图层可编辑状态下方可完成。要使用合并工具，请点选图层->切换编辑状态
- Not enough features selected
+ 没有选择到足够的要素
+
+
+ The merge tool requires at least two selected features
合并工具要求至少选中两个要素
- Merged feature attributes
合并要素属性
- Merge failed
+ 合并失败
+
+
+ An error occured during the merge operation
+ 合并操作过程中发生错误
+
+
+ Union operation canceled
+ 已放弃合并操作
+
+
+ The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
合并操作的结果会导致与当前图层不兼容的几何图形类型，因而该操作被取消
- Merged features
合并要素
- No active vector layer
没有活动矢量图层
- To select features, choose a vector layer in the legend
在图例中选择一个矢量图层方可选择要素
- Features cut
剪切要素
- Features pasted
粘贴要素
- Paste features
-
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
-
- New memory layer name
-
- Layer name
- 图层名称
+
- No features in clipboard.
-
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
-
- Cannot create field %1 (%2,%3)
-
- Cannot copy style: %1
无法复制样式: %1
- Cannot parse style: %1:%2:%3
无法解析样式: %1:%2:%3
- Cannot read style: %1
无法读取样式: %1
- Start editing failed
+ 开始编辑失败
+
+
+ Provider cannot be opened for editing
+ 数据源不能以可写方式打开
+
+
+ Stop editing
+ 结束编辑
+
+
+ Do you want to save the changes to layer %1?
+ 你要将更改保存到图层%1吗？
+
+
+ Problems during roll back
+ 回滚时发生问题
+
+
+ Could not %1 changes to layer %2
Errors: %3
@@ -15798,143 +12891,340 @@ Errors: %3
错误：%3
- rollback
回滚
- cancel
取消
- Save
保存
- all
全部
- Rollback
回滚
- Cancel
取消
- Current edits
当前编辑
- %1 current changes for %2 layer(s)?
%1当前对%2图层作出的更改？
- copy
复制
- Plugin layer
插件图层
- Memory layer
内存图层
- Duplicate layer:
创建图层副本：
- %1 (duplication resulted in invalid layer)
%1（创建副本结果导致无效图层）
- Set scale visibility for selected layers
-
- http://qgis.org/en/site/forusers/commercial_support.html
-
-
- Please check the <a href="#messageLog">message log</a> for further info.
-
-
- A network request timed out, any data received is likely incomplete.
-
-
- %1 (%2type unsupported)
- %1（%2类型不受支持）
-
-
- Couldn't load Python support library: %1
无法载入Python支持库: %1
- Couldn't resolve python support library's instance() symbol.
无法解析Python支持库的instance()符号。
- Python support ENABLED :-)
已开启Python支持 :-)
- There is a new version of QGIS available
+ QGIS有新版本
+
+
+ You are running a development version of QGIS
+ 您正在使用QGIS的开发版本
+
+
+ You are running the current version of QGIS
+ 您正在使用QGIS的当前版本
+
+
+ Would you like more information?
+ 您想了解更多的信息吗?
+
+
+ QGIS Version Information
+ QGIS版本信息
+
+
+ QGIS - Changes since last release
QGIS——自上一版本以来的变更
- Unable to get current version information from server
+ 无法从服务器得到当前版本的信息
+
+
+ Connection refused - server may be down
+ 连接被拒绝 - 服务器可能出现故障
+
+
+ QGIS server was not found
+ 未找到QGIS服务器
+
+
+ Unknown network socket error: %1
未知的网络套接字错误：%1
- Unable to communicate with QGIS Version server
+%1
+ 无法与QGIS版本服务器通信
+%1
+
+
+ To perform a full histogram stretch, you need to have a raster layer selected.
要执行完整的柱状图拉伸，你需要先选择栅格图层。
- No Raster Layer Selected
- 未选择栅格图层
+ To change brightness or contrast, you need to have a raster layer selected.
+ 要更改亮度和对比度，你需要先选择栅格图层。
- No Valid Raster Layer Selected
- 未选择可用的栅格图层
+ en
+ documentation language
+ 英语
- Layer is not valid
+ 图层无效
+
+
+ The layer %1 is not a valid layer and can not be added to the map
+ 图层%1不是一个有效的图层，不能添加到地图上
+
+
+ The layer is not a valid layer and can not be added to the map
+ 该图层不是一个有效的图层，无法添加到地图中
+
+
+ Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
+ 项目中有些图层正处于编辑模式且有未保存的编辑，这些编辑将不会被保存！
+
+
+ Save?
+ 保存？
+
+
+ Current CRS: %1 (OTFR enabled)
+ 当前坐标参照系：%1（OTFR已启用）
+
+
+ Current CRS: %1 (OTFR disabled)
+ 当前坐标参照系：%1（OTFR已禁用）
+
+
+ Map coordinates for the current view extents
+ 当前视图范围的地图坐标
+
+
+ Map coordinates at mouse cursor position
+ 鼠标指针位置的地图坐标值
+
+
+ Extents:
+ 范围：
+
+
+ Maptips require an active layer
+ 地图提示要求有活动图层
+
+
+ %n feature(s) selected on layer %1.
+ number of selected features
+ 图层%1上选中了%n个要素。
+
+ Open a GDAL Supported Raster Data Source
+ 打开一个GDAL支持的栅格数据源
+
+
+ Error adding valid layer to map canvas
+ 添加有效图层到地图视图时失败
+
+
+ Raster layer
+ 栅格图层
+
+
+ %1 is not a supported raster data source
+ %1不是一个受支持的栅格数据源
+
+
+ Unsupported Data Source
+ 不支持的数据源
+
+
+ Exit QGIS
+
+
+ Do you really want to quit QGIS?
+
+
+ This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
+
+
+ <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
+ <p>这是旧版的QGIS软件保存的项目文件。当你再次保存该项目文件时，QGIS会将其更新为最新版本。新版项目文件旧版本QGIS可能无法使用。<p>虽然QGIS开发者们都试图保持软件的向后兼容性，旧版项目文件的某些信息仍然可能会丢失。为了提高QGIS软件的质量，我们非常欢迎你在%3提交错误或漏洞报告。请务必附上你的旧版目文件，并说明你用来打开这个项目文件时发现错误的QGIS版本号。<p>若要在打开旧版项目文件时不显示此警告信息，请在菜单“%4”选项框“%5”上取消勾选即可。<p>项目文件版本：%1<br>当前QGIS软件版本：%2
+
+
+ <tt>Settings:Options:General</tt>
+ Menu path to setting options
+ <tt>设置：选项：通用</tt>
+
+
+ Warn me when opening a project file saved with an older version of QGIS
+ 当打开旧版格式的QGIS项目文件时警告我
+
+
+ Project file is older
+ 项目文件的格式版本比较老
+
+
+ This project file was saved by an older version of QGIS
+ 这个项目文件是老版本的QGIS保存的
+
+
+ Please check the <a href="#messageLog">message log</a> for further info.
+
+
+ A network request timed out, any data received is likely incomplete.
+
+
+ Warning
+ 警告
+
+
+ This layer doesn't have a properties dialog.
+ 这个图层没有属性对话框。
+
+
+ Authentication required
+ 需要认证
+
+
+ Proxy authentication required
+ 需要代理认证
+
+
+ SSL errors occured accessing URL %1:
访问网址%1时发生SSL错误：
-
Always ignore these errors?
@@ -15943,61 +13233,10 @@ Always ignore these errors?
总是忽略这些错误？
- %n SSL errors occured
number of errors
-
- 发生了%n个SSL错误
-
-
-
- Ctrl+/
- Capture Lines
- Ctrl+/
-
-
- Coordinate:
- 坐标：
-
-
- Current map coordinate
- 当前地图的坐标
-
-
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position.
- 显示鼠标指针当前位置的地图坐标。坐标值会随着鼠标指针移动连续改变。允许编辑设定地图的中心点位置。
-
-
- Current map coordinate (formatted as x,y)
- 当前地图的坐标（x,y格式）
-
-
- Extents:
- 范围：
-
-
- Quantum GIS
- Quantum GIS
-
-
- Ctrl+P
- New Print Composer
- Ctrl+P
-
-
- Composer %1
- 版式 %1
-
-
- &Raster
- 栅格(&R)
+ 发生了%n个SSL错误
@@ -16010,39 +13249,11 @@ Always ignore these errors?
QgsAbout
-
- About Quantum GIS
- 关于Quantum GIS
-
About
关于
-
- Version
- 版本
-
-
- What's New
- 新特性
-
-
- Essen (Germany), Developer meeting 2012
- 德国Essen，2012年开发者大会
-
-
- Contributors
- 贡献者
-
-
- QGIS Home Page
- QGIS主页
-
About QGIS
@@ -16051,13 +13262,13 @@ Always ignore these errors?
License
- 许可证
+
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -16069,6 +13280,32 @@ p, li { white-space: pre-wrap; }
QGIS is licensed under the GNU General Public License
QGIS在GNU通用公共许可证授权下发布
+
+ http://www.gnu.org/licenses
+ http://www.gnu.org/licenses
+
+
+ QGIS Home Page
+ QGIS主页
+
+
+ Join our user mailing list
+ 加入用户邮件列表
+
+
+ about:blank
+ about:blank
+
+
+ What's New
+ 新特性
+
Providers
@@ -16080,36 +13317,24 @@ p, li { white-space: pre-wrap; }
开发人员
- License
- 证书
+ Essen (Germany), Developer meeting 2012
+ 德国Essen，2012年开发者大会
- Name
- 名称
+ Contributors
+ 贡献者
- Quantum GIS is licensed under the GNU General Public License
- Quantum GIS在GNU通用公共许可证授权下发布
+ Translators
+ 翻译者
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">Quantum GIS (QGIS)</span></p></body></html>
- <html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">Quantum GIS (QGIS)</span></p></body></html>
-
-
- http://www.gnu.org/licenses
- http://www.gnu.org/licenses
-
-
- Join our user mailing list
- 加入用户邮件列表
+ Donors
+ 捐赠
Qt Image Plugin Search Paths <br>
Qt位图插件搜索路径<br>
-
- Translators
- 翻译者
-
-
- about:blank
- about:blank
-
-
- Donors
- 捐赠
-
QgsAddAttrDialog
@@ -16169,29 +13378,15 @@ p, li { white-space: pre-wrap; }
QgsAddAttrDialogBase
- Add Attribute
- 添加属性
-
-
- Width
- 宽度
-
-
- Precision
- 精度
+ Add column
+ 添加字段
N&ame
名称(&a)
-
- Add column
- 添加字段
-
Comment
@@ -16203,6 +13398,16 @@ p, li { white-space: pre-wrap; }
Type
类型
+
+ Width
+ 宽度
+
+
+ Precision
+ 精度
+
QgsAddJoinDialogBase
@@ -16298,11 +13503,6 @@ p, li { white-space: pre-wrap; }
Fixed map position
固定地图位置
-
- Background color
- 背景颜色
-
Map marker
@@ -16313,6 +13513,11 @@ p, li { white-space: pre-wrap; }
Frame width
边框宽度
+
+ Background color
+ 背景颜色
+
Frame color
@@ -16324,108 +13529,108 @@ p, li { white-space: pre-wrap; }
&Expand All
- 全部展开(&E)
+
&Collapse All
- 全部折叠(&C)
+
&Remove
- 移除(&R)
+
&Set Group CRS
- 设置组的坐标参照系(&S)
+
&Zoom to Best Scale (100%)
- 缩放到最佳比例（100%）(&Z)
+
&Stretch Using Current Extent
- 使用当前范围进行拉伸（&S）
+
&Duplicate
- 创建副本(&D)
+
&Set Layer Scale Visibility
-
&Set Layer CRS
- 设置图层的坐标参照系(&S)
+
Set &Project CRS from Layer
- 将图层的坐标参照系设定为项目的坐标参照系(&P)
+
&Open Attribute Table
- 打开属性表(&O)
+
Save As...
- 另存为...
+
Save As Layer Definition File...
-
&Filter...
- 过滤(&F)...
+
&Properties
- 属性(&P)
+
Copy Style
- 复制样式
+
Paste Style
- 粘贴样式
+
QgsApplication
- Exception
异常
- unknown exception
未知异常
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -16449,123 +13654,82 @@ SVG搜索路径： %8
用户数据库路径： %9
- [ERROR] Can not make qgis.db private copy
- [错误] 无法为qgis.db创建私有副本
-
-
- Could not open qgis.db
- 无法打开qgis.db
-
-
- Migration of private qgis.db failed.
-%1
- 私有qgis.db迁移失败。
-%1
-
-
- Update of view in private qgis.db failed.
-%1
- 在私有的qgis.db中更新视图失败。
-%1
-
-
- Application state:
-Prefix: %1
-Plugin Path: %2
-Package Data Path: %3
-Active Theme Name: %4
-Active Theme Path: %5
-Default Theme Path: %6
-SVG Search Paths: %7
-User DB Path: %8
-
- 程序状态：
-路径前缀： %1
-插件路径： %2
-程序包数据路径： %3
-活动主题名称： %4
-活动主题路径： %5
-默认主题路径： %6
-SVG搜索路径： %7
-用户数据库路径： %8
-
-
-
match indentation of application state
+
+ [ERROR] Can not make qgis.db private copy
+ [错误] 无法为qgis.db创建私有副本
+
+
+ Could not open qgis.db
+ 无法打开qgis.db
+
+
+ Migration of private qgis.db failed.
+%1
+ 私有qgis.db迁移失败。
+%1
+
+
+ Update of view in private qgis.db failed.
+%1
+ 在私有的qgis.db中更新视图失败。
+%1
+
QgsAtlasComposition
- Filename parsing error: %1
- 文件名解析错误：%1
-
-
- Feature filter parser error: %1
- 要素过滤器解析错误：%1
-
-
- Feature filter eval error: %1
- 要素过滤器赋值错误：%1
-
-
- Atlas filter eval error: %1
-
- Composer
- 版式
+
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
-
- Filename eval error: %1
- 文件名赋值错误：%1
+
QgsAtlasCompositionWidget
-
- Map %1
- 地图 %1
-
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Atlas preview
-
No matching atlas features found!
-
Coverage layer
-
-
- Composer map
- 版式地图
-
-
- Coverage layer
- 覆盖范围图层
-
-
- Visibility
- 可见性
+
Hidden coverage layer
显示隐藏的覆盖范围图层
-
- Feature sorting
- 要素排序
-
Sort by
@@ -16648,31 +13796,11 @@ Parser error:
...
...
-
- Feature filtering
- 要素过滤
-
Filter with
过滤用
-
- Scaling
- 缩放
-
-
- Margin around feature
- 要素周围的边距
-
-
- %
- %
-
-
- Fixed scale
- 固定比例尺
-
Output
@@ -16750,6 +13878,27 @@ Parser error:
QgsAttributeActionDialogBase
+
+ Attribute Actions
+ 属性动作
+
+
+ Action list
+ 动作列表
+
+
+ This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
+ 该列表包含了为当前图层定义的所有动作。要添加动作，请在下面的控件内输入详细内容，然后按添加动作按钮。双击相应的条目即可编辑动作。
+
+
+ Type
+ 类型
+
动作
- This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Insert action button. Actions can be edited here by double clicking on the item.
- 该列表包含了为当前图层定义的所有动作。在底部的控件中输入详细内容，然后按插入动作按钮即可添加动作。只要双击相应的条目就能编辑它。
+ Capture
+ 捕获
- Move up
- 上移
+ Remove the selected action
+ 移除选中的动作
Move the selected action up
将选中的动作上移
-
- Move down
- 下移
-
Move the selected action down
将选中的动作下移
- Remove
- 移除
+ Add default actions
+ 添加默认动作
- Remove the selected action
- 移除选中的动作
+ Action properties
+ 动作属性
+
+
+ Generic
+ 通用
+
+
+ Python
+ Python
+
+
+ Mac
+ Mac
+
+
+ Windows
+ Windows
+
+
+ Unix
+ Unix
+
+
+ Open
+ 打开
+
+
+ Captures any output from the action
+ 捕获该动作的所有输出
+
+
+ Captures the standard output or error generated by the action and displays it in a dialog box
+ 捕获该动作生成的标准输出和错误，并在对话框中显示
+
+
+ Capture output
+ 捕获输出
Enter the action name here
在这里输入动作的名称
+
+ Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
+ 在此输入动作。可输入系统上任何可用的的程序，脚本或者命令。动作被调用时任何以%开头并含有字段名的字符集将被该字段的值所替换。特殊的字符集%%也将被选择的字段的值所替换。用双引号括住的文本将被视为动作调用过程中的单一参数，但若前面带有反斜杠双引号将被忽略
+
Enter the action command here
在这里输入动作的命令
-
- Insert action
- 插入动作
-
-
- Inserts the action into the list above
- 将动作插入到上面的列表中
-
-
- Update action
- 更新动作
-
-
- Update the selected action
- 更新选中的动作
-
-
- Insert field
- 插入字段
-
-
- Inserts the selected field into the action, prepended with a %
- 将选中的字段插入动作中，并在前面加上a%
-
-
- The valid attribute names for this layer
- 有效的属性名称
-
-
- Capture
- 捕获
-
-
- Capture output
- 捕获输出
-
-
- Captures any output from the action
- 捕获该动作的所有输出
-
-
- Captures the standard output or error generated by the action and displays it in a dialog box
- 捕获该动作生成的标准输出和错误，并在对话框中显示
-
-
- Attribute Actions
- 属性动作
-
-
- This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
- 该列表包含了为当前图层定义的所有动作。要添加动作，请在下面的控件内输入详细内容，然后按添加动作按钮。双击相应的条目即可编辑动作。
-
-
- Remove action
- 移除动作
-
-
- Add default actions
- 添加默认动作
-
-
- Action properties
- 动作属性
-
-
- Open
- 打开
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
@@ -16905,6 +14022,11 @@ Parser error:
Click to browse for an action
点击浏览一个动作
+
+ Clicking the button will let you select an application to use as the action
+ 点击按钮可选择一个用于动作的应用程序
+
...
@@ -16920,10 +14042,25 @@ Parser error:
Insert expression...
插入表达式...
+
+ The valid attribute names for this layer
+ 有效的属性名称
+
Inserts the selected field into the action
-
+
+ Insert field
+ 插入字段
+
+
+ Inserts the action into the list above
+ 将动作插入到上面的列表中
添加到动作列表
- Update selected action
+ Update the selected action
更新选中的动作
- Clicking the button will let you select an application to use as the action
- 点击按钮可选择一个用于动作的应用程序
-
-
- Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
- 在此输入动作。可输入系统上任何可用的的程序，脚本或者命令。动作被调用时任何以%开头并含有字段名的字符集将被该字段的值所替换。特殊的字符集%%也将被选择的字段的值所替换。用双引号括住的文本将被视为动作调用过程中的单一参数，但若前面带有反斜杠双引号将被忽略
-
-
- Action list
- 动作列表
-
-
- Type
- 类型
-
-
- Generic
- 通用
-
-
- Python
- Python
-
-
- Windows
- Windows
-
-
- Mac
- Mac
-
-
- Unix
- Unix
+ Update selected action
+ 更新选中的动作
QgsAttributeDialog
-
- Error
- 错误
-
-
- Error: %1
- 错误：%1
-
-
- Attributes - %1
- 属性 - %1
-
Feature Attributes
-
-
-
- QgsAttributeEditor
-
- Select a file
- 选择一个文件
-
-
- Select a date
- 选择一个日期
-
-
- (no selection)
- （未选择）
-
-
- ...
- ...
-
-
- <
- <
-
-
- Select filename...
- 选择文件名...
-
-
- Save current page url in attribute
- 在属性里保存当前页面地址
-
-
- Select date in calendar
- 在日历中选择日期
-
-
- Select color in browser
- 在浏览器中选择颜色
-
-
- Open current page in default browser
- 使用默认浏览器打开当前页面
+
@@ -17050,7 +14091,7 @@ Parser error:
Attributes changed
- 更改属性
+
@@ -17090,19 +14131,11 @@ Parser error:
Insert NULL value on top
-
QgsAttributeSelectionDialog
-
- Attribute
- 属性
-
-
- Clear
- 清除
-
Ascending
@@ -17124,49 +14157,18 @@ Parser error:
Columns
- 列
+
Reset
- 重置
-
-
- <b>Attribute</b>
- <b>属性</b>
-
-
- <b>Alias</b>
- <b>别名</b>
-
-
- Select all
- 全选
-
-
- Clear
- 清除
+
Sorting
排序
-
- Column
- 列
-
-
- Ascending
- 升序
-
-
-
- QgsAttributeTableAction
-
- Attributes changed
- 更改属性
-
QgsAttributeTableDelegate
@@ -17178,35 +14180,11 @@ Parser error:
QgsAttributeTableDialog
-
- Search string parsing error
- 搜索字符串解析错误
-
-
- Search results
- 搜索结果
-
-
- You've supplied an empty search string.
- 您提供了一个空的搜索字符串。
-
-
- Error during search
- 搜索时出错
-
Attribute Table
属性表
-
- Show selected only
- 仅显示选中的
-
-
- Search selected only
- 仅搜索选中的
-
Case sensitive
@@ -17218,8 +14196,9 @@ Parser error:
?
- Close
- 关闭
+ Delete selected features (DEL)
+
Invert selection (Ctrl+R)
反选(Ctrl+R)
+
+ Ctrl+S
+ Ctrl+S
+
+
+ Copy selected rows to clipboard (Ctrl+C)
+ 将选中的行复制到剪贴板(Ctrl+C)
+
+
+ Ctrl+C
+ Ctrl+C
+
Zoom map to the selected rows (Ctrl+J)
缩放地图到选中的行(Ctrl+J)
+
+ Ctrl+J
+ Ctrl+J
+
Pan map to the selected rows (Ctrl+P)
@@ -17278,12 +14277,10 @@ Parser error:
保存编辑(Ctrl+S)
- Delete selected features (Ctrl+D)
- 删除选中的要素(Ctrl+D)
-
-
- Ctrl+D
- Ctrl+D
+ ...
+ ...
Ctrl+W
Ctrl+W
-
- The filter defines, which features are currently shown in the list or on the table
- 过滤器定义了当前表格中显示哪些要素
-
-
- The filter defines which features are currently shown in the list or on the table
- 过滤器定义了列表或表格中当前显示的要素
-
Filter
@@ -17325,20 +14313,11 @@ Parser error:
Apply
应用
-
- Attribute View
- 属性视图
-
-
- Form View
-
mMainViewButtonGroup
-
=
- =
+
Update All
-
Show Edited and New Features
显示已编辑的要素和新要素
-
- Show All
- 全部显示
-
-
- Show Selected
- 显示选中的
-
Show Features Visible On Map
显示地图上可见的要素
+
+ The filter defines which features are currently shown in the list or on the table
+ 过滤器定义了列表或表格中当前显示的要素
+
+
+ Form View
+
Column Filter
字段过滤
-
- Filter Edited
- 编辑过滤
-
Filter all the features which have been edited but not yet saved
@@ -17428,15 +14405,6 @@ Parser error:
Add feature
添加要素
-
- +
- +
-
-
- Delete selected features (DEL)
-
Open field calculator (Ctrl+I)
@@ -17447,78 +14415,11 @@ Parser error:
Ctrl+I
Ctrl+I
-
- Invert selection
- 反向选择
-
-
- Ctrl+S
- Ctrl+S
-
-
- Copy selected rows to clipboard (Ctrl+C)
- 将选中的行复制到剪贴板(Ctrl+C)
-
-
- Ctrl+C
- Ctrl+C
-
-
- Ctrl+J
- Ctrl+J
-
-
- Look for
- 查找
-
-
- in
- 在
-
-
- Looks for the given value in the given attribute column
- 在给出的属性列中查找给出的值
-
-
- &Search
- 搜索(&S)
-
-
- Opens the search query builder
- 打开搜索查询构建器
-
-
- Advanced search
- 高级搜索
-
-
- Help
- 帮助
-
-
- ...
- ...
-
Attribute table - %1 (%n Feature(s))
feature count
-
- 属性表 - %1（%n个要素）
-
-
-
- Attribute table - %1 :: %n / %2 feature(s) selected
- feature count
-
- 属性表 - %1 :: 共%2个要素，选中了%n个
-
+ 属性表 - %1（%n个要素）
Evaluation error
鉴定错误
-
- Attribute table - %1 (%n matching features)
- matching features
-
- 属性表 - %1（%n个匹配的要素）
-
-
-
- Attribute table - %1 (No matching features)
- 属性表 - %1（无匹配的要素）
-
Attribute table - %1 :: Features total: %2, filtered: %3, selected: %4
@@ -17549,19 +14439,18 @@ Parser error:
Update Filtered
-
Error
- 错误
+
An error occured while evaluating the calculation string:
%1
- 鉴定计算字符串时发生错误：
-%1
+
Geometryless feature added
添加了非几何图形要素
-
- Run action
- 执行动作
-
-
- Loading feature attributes...
- 正在载入要素属性...
-
-
- Abort
- 放弃
-
-
- Attribute table
- 属性表
-
-
- %1 features loaded.
- 载入了%1个要素。
-
QgsAttributeTableModel
@@ -17647,195 +14516,10 @@ Parser error:
QgsAttributeTypeDialog
-
- Edit filter expression
- 编辑过滤表达式
-
-
- Current minimum for this value is %1 and current maximum is %2.
- 该值当前最小为%1，最大为%2。
-
-
- Attribute has no integer or real type, therefore range is not usable.
- 属性不是整型或实型，因此范围无法使用。
-
-
- Enumeration is not available for this attribute
- 枚举不能用于该属性
-
-
- Field contains an URL
- 包含地址的字段
-
-
- Attribute Edit Dialog
- 属性编辑对话框
-
-
- Line edit
- 行编辑框
-
-
- Classification
- 类别
-
-
- Range
- 范围
-
-
- Unique values
- 唯一值
-
-
- File name
- 文件名称
-
-
- Value map
- 值图
-
-
- Enumeration
- 枚举
-
-
- Immutable
- 不可变
-
-
- Calendar
- 日历
-
-
- Value relation
- 值关系
-
-
- UUID generator
- 唯一识别码（UUID）生成器
-
-
- Photo
- 相片
-
-
- Webview
- 网页视图
-
-
- Color
- 颜色
-
-
- Simple edit box. This is the default editation widget.
- 简单的编辑框。这是默认的编辑控件。
-
-
- Displays combo box containing values of attribute used for classification.
- 显示有分类用属性值的组合框。
-
-
- Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
- 允许人们在指定的范围内设置数值。该编辑控件可以是一个滑块或旋钮。
-
-
- Minimum
- 最小值
-
-
- Maximum
- 最大值
-
-
- Step
- 步长
-
-
- Date format
- 日期格式
-
-
- A calendar widget to enter a date.
- 日历控件，用于输入日期。
-
-
- <html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
- <html><head/><body><p>实例格式:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">格式</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">结果</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">参考文档</span></a></p></body></html>
-
-
- Layer
- 图层
-
-
- Key column
- 键字段
-
-
- Value column
- 值字段
-
-
- Filter expression
- 过滤表达式
-
-
- ...
- ...
-
-
- Height
- 高度
-
-
- Width
- 宽度
-
Edit Widget Properties
-
-
- Label on top
- 顶层标签
-
-
- Field contains a filename for a picture
- 包含文件名或图片的字段
-
-
- Fields contains an URL
- 包含地址的字段
-
-
- Field contains a color
- 包含颜色的字段
-
-
- Select layer, key column and value column
- 选择图层、键字段和值字段
-
-
- Allow null value
- 允许空值
-
-
- Order by value
- 按值排序
-
-
- Allow multiple selections
- 允许多选
-
-
- Read-only field that generates a UUID if empty.
- 只读字段，若为空则生成唯一识别码（UUID）。
-
-
- Slider
- 滑块
+
可编辑
- Local minimum/maximum = 0/0
- 本地最小值/最大值=0/0
-
-
- The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
- 用户可以选择一个已在该属性中的使用的值。若可编辑，将显示一个支持自动完成功能的行编辑框，否则显示一个组合框。
-
-
- Simplifies file selection by adding a file chooser dialog.
- 通过添加一个文件选择对话框来简化文件选择方式。
-
-
- Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
- 带预定义条目的组合框。值存储在属性里，对应的描述显示在组合框中。
-
-
- Load Data from layer
- 从图层载入数据
-
-
- Value
- 值
-
-
- Description
- 描述
-
-
- Remove Selected
- 移除选中
-
-
- Combo box with values that can be used within the column's type. Must be supported by the provider.
- 可在列的类型里面使用的带值的组合框。须受数据源支持。
-
-
- Select a file
- 选择一个文件
-
-
- Error
- 错误
-
-
- Could not open file %1
-Error was:%2
- 无法打开文件%1
-错误：%2
-
-
- Load Data from CSV file
- 从CSV文件载入数据
-
-
- Hidden
- 隐藏
-
-
- An immutable attribute is read-only - the user is not able to modify the contents.
- 不可变属性是只读的——用户不可以改变其内容。
-
-
- A hidden attribute will be invisible - the user is not able to see it's contents.
- 隐藏属性将不可见——用户不能看到其内容。
-
-
- Checkbox
- 复选框
-
-
- Text edit
- 文本编辑
-
-
- Representation for checked state
- 表示选中状态
-
-
- Representation for unchecked state
- 表示未选中状态
-
-
- A text edit field that accepts multiple lines will be used.
- 令字段可接受多行文本编辑。
+ Label on top
+ 顶层标签
@@ -18004,6 +14607,16 @@ Error was:%2
&Add
添加(&A)
+
+ &Delete
+ 删除(&D)
+
+
+ &Zoom to
+ 缩放到...(&Z)
+
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- 确定要删除%n个书签？
-
+ 确定要删除%n个书签？
Reprojected extent is empty.
重新投影范围为空。
-
- &Delete
- 删除(&D)
-
-
- &Zoom to
- 缩放到...(&Z)
-
QgsBookmarksBase
@@ -18116,22 +14717,6 @@ Database:%2
Geospatial Bookmarks
书签
-
- Name
- 名称
-
-
- Project
- 项目
-
-
- Extent
- 范围
-
-
- Id
- Id
-
QgsBrowser
@@ -18211,11 +14796,7 @@ Database:%2
F5
- F5
-
-
- Ctrl+R
- Ctrl+R
+
QgsBrowserDockWidget
-
- Browser
- 浏览器
-
-
- Refresh
- 刷新
-
-
- Add Selection
- 添加选择
-
-
- Add Selected Layers
- 添加选中的图层
-
-
- Collapse All
- 全部折叠
-
-
- Add as a favourite
- 添加为喜欢
-
-
- Remove favourite
- 移除喜欢
-
-
- Add Layer
- 添加图层
-
-
- Properties
- 属性
-
Case Sensitive
- 区分大小写
+
Normal
- 正常
+
Regular Expression
正则表达式
+
+ Add as a favourite
+ 添加为喜欢
+
+
+ Remove favourite
+ 移除喜欢
+
+
+ Properties
+ 属性
+
Fast scan this dir.
快速扫描该目录。
+
+ Add Layer
+ 添加图层
+
+
+ Add Selected Layers
+ 添加选中的图层
+
Add a directory
@@ -18455,6 +15020,11 @@ Database:%2
Solid
实线
+
+ No Brush
+ 没有画刷
+
Horizontal
@@ -18520,11 +15090,6 @@ Database:%2
Dense 7
Dense 7
-
- No Brush
- 没有画刷
-
QgsBusyIndicatorDialog
@@ -18539,104 +15104,44 @@ Database:%2
Form
- 窗体
+
A calendar widget to enter a date.
- 日历控件，用于输入日期。
+
Date format
- 日期格式
+
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
- <html><head/><body><p>实例格式:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">格式</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">结果</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">参考文档</span></a></p></body></html>
+
QgsCategorizedSymbolRendererV2Model
- Symbol
符号
- Value
值
- Label
标签
QgsCategorizedSymbolRendererV2Widget
-
- Value
- 值
-
-
- Label
- 标签
-
-
- Random colors
-
-
- Symbol levels...
- 符号层次...
-
-
- High number of classes!
- 类别数目太大！
-
-
- Classification would yield %1 entries which might not be expected. Continue?
- 分类操作将导致产生%1个意料之外的条目。要继续吗？
-
-
- Error
- 错误
-
-
- There are no available color ramps. You can add them in Style Manager.
- 没有可用的颜色渐变。你可以在样式管理器中添加。
-
-
- The selected color ramp is not available.
- 选中的颜色渐变不可用。
-
-
- Confirm Delete
- 确认删除
-
-
- The classification field was changed from '%1' to '%2'.
-Should the existing classes be deleted before classification?
- 类别字段已经由“%1”更改为“%2”。
-分类之前是否删除已有的类别？
-
-
- change
- 更改
-
Column
@@ -18660,7 +15165,7 @@ Should the existing classes be deleted before classification?
Invert
- 反转
+
Advanced
高级
+
+ Random colors
+
+
+ Symbol levels...
+ 符号层次...
+
+
+ High number of classes!
+ 类别数目太大！
+
+
+ Classification would yield %1 entries which might not be expected. Continue?
+ 分类操作将导致产生%1个意料之外的条目。要继续吗？
+
+
+ Error
+ 错误
+
+
+ There are no available color ramps. You can add them in Style Manager.
+ 没有可用的颜色渐变。你可以在样式管理器中添加。
+
+
+ The selected color ramp is not available.
+ 选中的颜色渐变不可用。
+
+
+ Confirm Delete
+ 确认删除
+
+
+ The classification field was changed from '%1' to '%2'.
+Should the existing classes be deleted before classification?
+ 类别字段已经由“%1”更改为“%2”。
+分类之前是否删除已有的类别？
+
QgsCharacterSelectorBase
@@ -18716,25 +15269,21 @@ Should the existing classes be deleted before classification?
Form
- 窗体
+
Representation for checked state
- 表示选中状态
+
Representation for unchecked state
- 表示未选中状态
+
QgsCollapsibleGroupBoxBasic
-
- Ctrl(or Alt)-click to toggle all
- Ctrl（或 Alt）——点击以切换全部
-
Shift-click to expand, then collapse others
@@ -18749,24 +15298,19 @@ Should the existing classes be deleted before classification?
QgsColorButton
- Select Color
选择颜色
- Copy color
-
- Paste color
-
-
- Pick color
-
@@ -18783,7 +15327,7 @@ Should the existing classes be deleted before classification?
Random colors
-
QgsComposer
- Big image
- 大位图
-
-
- Image too big
- 位图太大
-
-
- Creation of image with %1x%2 pixels failed. Export aborted.
- 创建%1x%2像素的位图失败。放弃导出。
-
-
- SVG warning
- SVG警告
-
-
- Don't show this message again
- 不要再显示此消息
-
-
- SVG Format
- SVG格式
+ Close
+ 关闭
QGIS
- File
- 文件
-
-
- View
- 视图
-
-
- Layout
- 布局
-
-
- Composition
- 结构
-
-
- Item Properties
- 条目属性
-
-
- Image too large
- 位图太大
-
-
- Creation of image with %1x%2 pixels failed. Retry without 'Print As Raster'?
- 创建%1x%2像素的位图失败。忽略“打印为位图”，再重试？
-
-
- To create image %1x%2 requires about %3 MB of memory. Proceed?
- 要创建%1x%2像素的位图，至少需要%3MB内存。继续吗？
-
-
- Choose a file name to save the map image as
- 选择一个文件名以保存地图位图文件
-
-
- Choose a file name to save the map as
- 选择一个文件名以保存地图
-
-
- The given output directory is not writable. Cancelling.
- 给定的输出目录不可写。放弃。
-
-
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
-Please try a lower resolution or a smaller papersize
- 尝试创建影像#%1（%2%3 @ %4dpi ）可能会导致内存溢出.
-请尝试调低分辨率或者会用更小的纸张大小
-
-
- Save template
- 保存模板
-
-
- Composer templates
- 版式模板
-
-
- Composer error
- 版式错误
-
-
- Error, could not create new composer
- 错误，无法创建新版式
-
-
- Loading template into composer...
- 将模板载入到版式中...
-
-
- Project contains WMS layers
- 项目包含WMS图层
-
-
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
- 有些WMS服务器（如UMN地图服务器）对宽度和高度参数有限制。从这些服务器打印图层时可能会超出限制。如果发生了这种情况，WMS图层将不会被打印
-
-
- Command history
- 命令历史
-
-
- Close
- 关闭
+ Composer
+ 版式
Cu&t
-
Cut
- 剪切
+
&Copy
-
Copy
- 复制
+
&Paste
-
Paste
- 粘帖
+
Edit
- 编辑
+
Normal
- 正常
+
Simulate Photocopy (Grayscale)
-
Simulate photocopy (grayscale)
-
Simulate Fax (Mono)
-
Simulate fax (mono)
-
Simulate Color Blindness (Protanope)
-
Simulate color blindness (Protanope)
-
Simulate Color Blindness (Deuteranope)
-
Simulate color blindness (Deuteranope)
-
+
+ View
+ 视图
Toolbars
工具栏
+
+ Layout
+ 布局
+
Atlas
-
Settings
- 设置
+
%1%
-
-
-%1%
+
+
+ Composition
+ 结构
Item properties
-
+
+ Command history
+ 命令历史
Set as atlas feature for %1
-
x: %1 mm
-
y: %1 mm
-
page: %3
-
Enable atlas preview
-
Atlas in not currently enabled for this composition!
-
No matching atlas features found!
-
+
+ Choose a file name to save the map as
+ 选择一个文件名以保存地图
+
+
+ PDF Format
+ PDF格式
Empty filename pattern
文件名模式为空
The filename pattern is empty. A default one will be used.
文件名模式为空。将启用默认的文件名模式。
@@ -19161,54 +15610,17 @@ Please try a lower resolution or a smaller papersize
Unable to write into the directory
无法写入目录
- Feature filter parser error: %1
- 要素过滤器解析错误：%1
-
-
- Error creating %1.
-
-
- Image export error
-
-
- SVG export error
-
-
- on page
-
-
- Landscape
- 横向
-
-
- The given output directory is not writeable. Cancelling.
- 给定的输出目录不可写。放弃。
+ The given output directory is not writable. Cancelling.
+ 给定的输出目录不可写。放弃。
Atlas processing error
图集处理错误
+
+ Feature filter parser error: %1
+
+
+ Error creating %1.
+
Rendering maps...
正在渲染地图...
Abort
放弃
- Big image
+ 大位图
+
+
+ To create image %1x%2 requires about %3 MB of memory. Proceed?
+ 要创建%1x%2像素的位图，至少需要%3MB内存。继续吗？
+
+
+ Choose a file name to save the map image as
+ 选择一个文件名以保存地图位图文件
+
+
+ Memory Allocation Error
内存分配错误
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
+Please try a lower resolution or a smaller papersize
+ 尝试创建影像#%1（%2%3 @ %4dpi ）可能会导致内存溢出.
+请尝试调低分辨率或者会用更小的纸张大小
+
+
+ Image export error
+
+
+ Directory where to save image files
保存位图文件的目录
- Image format:
位图格式：
- SVG warning
+ SVG警告
+
+
+ Don't show this message again
+ 不要再显示此消息
+
+
+ <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>由于上游Qt4的SVG代码有错误和不足，QGIS的SVG导出功能存在几个
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
问题。尤其是，没被剪辑到地图边框的图层会有问题。</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
如果您需要从QGIS得到一个基于矢量的输出文件，且SVG输出不能令你满意，建议您尝试打印到PostScript文件。</p>
- SVG Format
+ SVG格式
+
+
+ Directory where to save SVG files
保存SVG文件的目录
- SVG export error
+
+
+ on page
+
+
+ SVG error
-
- There was an error in SVG output for SVG layer
-
- copy
复制
- Duplicating composer...
正在创建版式副本...
- Duplicate Composer
创建版式副本
- Composer duplication failed.
版式副本创建失败。
- Save template
+ 保存模板
+
+
+ Composer templates
+ 版式模板
+
+
+ Save error
保存出错
- Error, could not save file
错误，无法保存文件
- Load template
载入模板
- Read error
读取错误
- Error, could not read file
错误，无法读取文件
- Composer error
+ 版式错误
+
+
+ Error, could not create new composer
+ 错误，无法创建新版式
+
+
+ Loading template into composer...
+ 将模板载入到版式中...
+
+
+ Project contains WMS layers
+ 项目包含WMS图层
+
+
+ Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
+ 有些WMS服务器（如UMN地图服务器）对宽度和高度参数有限制。从这些服务器打印图层时可能会超出限制。如果发生了这种情况，WMS图层将不会被打印
+
+
+ Project contains composition effects
项目包含合成效果
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
该项目启用了无法以矢量方式打印的高级合成效果，如混合模式和矢量图层透明。建议以栅格影像方式打印。
- Print as raster
以栅格影像方式打印
- Content of template file is not valid
- 模板文件的内容无效
-
-
- PDF Format
- PDF格式
-
-
- Composer
- 版式
+ Landscape
+
QgsComposerArrowWidget
-
- General options
- 通用选项
-
Arrow outline width
@@ -19383,10 +15889,6 @@ Please try a lower resolution or a smaller papersize
Arrowhead width
箭头头部宽度
-
- Arrow color
- 箭头颜色
-
Arrow color changed
@@ -19410,6 +15912,12 @@ Please try a lower resolution or a smaller papersize
Arrow start marker
箭头起始标记
+
+ Arrow end marker
+ 箭头终止标记
+
Start marker svg file
@@ -19420,12 +15928,6 @@ Please try a lower resolution or a smaller papersize
End marker svg file
终止标记 svg 文件
-
- Arrow end marker
- 箭头终止标记
-
QgsComposerArrowWidgetBase
@@ -19439,35 +15941,6 @@ Please try a lower resolution or a smaller papersize
Arrow
箭头
-
- Arrow color...
- 箭头颜色...
-
-
- Line width
- 线条宽度
-
-
- Arrow head width
- 箭头头部宽度
-
-
- Arrow markers
- 箭头标记
-
-
- Default marker
- 默认标记
-
-
- No marker
- 无标记
-
-
- SVG markers
- SVG标记
-
Main properties
@@ -19494,6 +15967,11 @@ Please try a lower resolution or a smaller papersize
Color...
颜色...
+
+ Arrow markers
+ 箭头标记
+
Default
@@ -19531,121 +16009,41 @@ Please try a lower resolution or a smaller papersize
Center
- 中间
+
Right
- 右边
+
Left
- 左边
+
Attribute
- 属性
+
Heading
-
Alignment
- 对齐
+
QgsComposerBase
-
- General
- 通用
-
-
- Composition
- 组成
-
-
- Item
- 条目
-
-
- &Print...
- 打印(&P)...
-
-
- Add new map
- 添加新地图
-
-
- Add new label
- 添加新标签
-
-
- Add new vect legend
- 添加新的矢量图例
-
-
- Select/Move item
- 选择/移动项目
-
-
- Add new scalebar
- 添加新比例尺
-
-
- Refresh view
- 刷新视图
-
MainWindow
主窗口
-
- Toolbar
- 工具栏
-
-
- Zoom In
- 放大
-
-
- Zoom Out
- 缩小
-
-
- Add Legend
- 添加图例
-
-
- Add new legend
- 添加新图例
-
-
- Add Image
- 添加位图
-
-
- Zoom Full
- 全图显示
-
Composer
@@ -19669,13 +16067,23 @@ Please try a lower resolution or a smaller papersize
Atlas
-
+
+ &Print...
+ 打印(&P)...
Ctrl+P
Ctrl+P
+
+ Zoom Full
+ 全图显示
+
Zoom full
@@ -19684,7 +16092,12 @@ Please try a lower resolution or a smaller papersize
Ctrl+0
-
+
+ Zoom In
+ 放大
Ctrl++
- Ctrl++
+
+
+ Zoom Out
+ 缩小
Ctrl+-
- Ctrl+-
+
Zoom to 100%
-
Ctrl+1
-
Zoom
- 缩放
+
Add Map
添加地图
+
+ Add new map
+ 添加新地图
+
Add Label
添加标签
+
+ Add new label
+ 添加新标签
+
+
+ Add Legend
+ 添加图例
+
+
+ Add new legend
+ 添加新图例
+
Move Item
移动条目
+
+ Select/Move item
+ 选择/移动项目
+
Export as Image...
@@ -19748,6 +16191,11 @@ Please try a lower resolution or a smaller papersize
Export as image
导出为位图
+
+ Export as PDF...
+ 导出为PDF文件...
+
Export as SVG...
@@ -19758,95 +16206,110 @@ Please try a lower resolution or a smaller papersize
Add Scalebar
添加比例尺
+
+ Add new scalebar
+ 添加新比例尺
+
Refresh
刷新
+
+ Refresh view
+ 刷新视图
+
Show Grid
-
Show grid
- 显示网格
+
Ctrl+'
-
Snap to Grid
-
Snap to grid
- 对齐到网格
+
Ctrl+Shift+'
-
Show Guides
-
Show guides
-
Ctrl+;
-
Snap to Guides
-
Snap to guides
-
Ctrl+Shift+;
-
Smart Guides
-
Smart guides
-
Ctrl+Alt+;
-
Clear Guides
-
Clear guides
-
+
+ Add Image
+ 添加位图
Ctrl+G
- Ctrl+G
+
Ctrl+Shift+G
-
Ctrl+]
-
Ctrl+[
-
Ctrl+Shift+]
-
Ctrl+Shift+[
-
+
+ Load from Template
+ 从模板载入
+
+
+ Load from template
+ 从模板载入
+
+
+ Save as Template
+ 保存为模板
+
+
+ Save as template
+ 保存为模板
+
+
+ Align Left
+ 左对齐
+
+
+ Align selected items left
+ 左对齐选中的条目
+
+
+ Align Center
+ 居中对齐
+
+
+ Align center horizontal
+ 水平居中对齐
+
+
+ Align Right
+ 右对齐
+
+
+ Align selected items right
+ 右对齐选中的条目
+
+
+ Align Top
+ 顶部对齐
+
+
+ Align selected items to top
+ 顶部对齐选中的条目
+
+
+ Align Center Vertical
+ 垂直居中对齐
+
+
+ Align center vertical
+ 垂直居中对齐
+
+
+ Align Bottom
+ 底部对齐
+
+
+ Align selected items bottom
+ 底部对齐选中的条目
+
+
+ &Quit
+ 退出(&Q)
+
+
+ Quit
+ 退出
+
+
+ Ctrl+Q
+ Ctrl+Q
+
+
+ Add Arrow
+ 添加箭头
+
+
+ Add arrow
+ 添加箭头
Add attribute table
添加属性表
+
+ Page Setup
+ 页面设置
+
+
+ Page setup
+ 页面设置
+
+
+ Ctrl+Shift+P
+ Ctrl+Shift+P
+
&Undo
- 撤销(&U)
+
&Redo
- 重做(&R)
+
+
+ Ctrl+Shift+L
+
+
+ Pa&ste in Place
+
+
+ Paste in place
+
+
+ Ctrl+Shift+V
+
+
+ &Delete
+
+
+ Delete selected items
+
+
+ Del
+
+
+ De&select All
+
+
+ Deselect all
+
+
+ Ctrl+Shift+A
+
+
+ Select &All
+
+
+ Select all items
+
+
+ Ctrl+A
+
+
+ &Invert Selection
+
+
+ Invert selection
+
+
+ Select Next Item &Below
+
+
+ Select next item below
+
+
+ Ctrl+Alt+[
+
+
+ Select Next Item &Above
+
+
+ Select next item above
+
+
+ Ctrl+Alt+]
+
+
+ Pan Composer
+
+
+ Composer Options...
+
+
+ Show Rulers
+
+
+ Show rulers
+
+
+ Ctrl+R
+
+
+ First Feature
+
+
+ Previous Feature
+
+
+ Next Feature
+
+
+ Last Feature
+
+
+ Preview Atlas
+
+
+ Print Atlas...
+
+
+ Export Atlas as Images...
+
+
+ Export Atlas as SVG...
+
+
+ Export Atlas as PDF...
+
+
+ Export Atlas as PDF
+
+
+ Atlas Settings
+
+
+ Revert last change
+ 撤销最后的更改
+
+
+ Ctrl+Z
+ Ctrl+Z
+
+
+ Restore last change
+ 还原最后的更改
+
+
+ Ctrl+Shift+Z
+ Ctrl+Shift+Z
+
+
+ Add Rectangle
+ 添加矩形
+
+
+ Add rectangle
+ 添加矩形
+
+
+ Add Triangle
+ 添加三角形
+
+
+ Add triangle
+ 添加三角形
+
+
+ Add Ellipse
+ 添加椭圆
Add HTML
添加HTML
+
+ Add html frame
+ 添加HTML框架
+
Composer Manager
@@ -20046,422 +16864,22 @@ Please try a lower resolution or a smaller papersize
Lock Selected Items
-
Ctrl+L
- Ctrl+L
+
Unlock All
-
Unlock All Items
-
-
- Ctrl+Shift+L
- Ctrl+Shift+L
-
-
- Pa&ste in Place
-
-
- Paste in place
-
-
- Ctrl+Shift+V
- Ctrl+Shift+V
-
-
- &Delete
- 删除(&D)
-
-
- Delete selected items
-
-
- Del
-
-
- De&select All
-
-
- Deselect all
-
-
- Ctrl+Shift+A
- Ctrl+Shift+A
-
-
- Select &All
-
-
- Select all items
-
-
- Ctrl+A
- Ctrl+A
-
-
- &Invert Selection
-
-
- Invert selection
- 反向选择
-
-
- Select Next Item &Below
-
-
- Select next item below
-
-
- Ctrl+Alt+[
-
-
- Select Next Item &Above
-
-
- Select next item above
-
-
- Ctrl+Alt+]
-
-
- Pan Composer
-
-
- Composer Options...
-
-
- Show Rulers
-
-
- Show rulers
-
-
- Ctrl+R
- Ctrl+R
-
-
- First Feature
-
-
- Previous Feature
-
-
- Next Feature
-
-
- Last Feature
-
-
- Preview Atlas
-
-
- Print Atlas...
-
-
- Export Atlas as Images...
-
-
- Export Atlas as SVG...
-
-
- Export Atlas as PDF...
-
-
- Export Atlas as PDF
-
-
- Atlas Settings
-
-
- Load From template
- 从模板载入
-
-
- Save as template
- 保存为模板
-
-
- Align left
- 左对齐
-
-
- Align selected items left
- 左对齐选中的条目
-
-
- Align center
- 居中对齐
-
-
- Align center horizontal
- 水平居中对齐
-
-
- Align right
- 右对齐
-
-
- Align selected items right
- 右对齐选中的条目
-
-
- Align top
- 顶部对齐
-
-
- Align selected items to top
- 顶部对齐选中的条目
-
-
- Align center vertical
- 垂直居中对齐
-
-
- Align bottom
- 底部对齐
-
-
- Align selected items bottom
- 底部对齐选中的条目
-
-
- Add table
- 添加表格
-
-
- Adds attribute table
- 添加属性表
-
-
- Page Setup
- 页面设置
-
-
- Page setup
- 页面设置
-
-
- Ctrl+Shift+P
- Ctrl+Shift+P
-
-
- Undo
- 撤销
-
-
- Revert last change
- 撤销最后的更改
-
-
- Ctrl+Z
- Ctrl+Z
-
-
- Redo
- 重做
-
-
- Restore last change
- 还原最后的更改
-
-
- Ctrl+Shift+Z
- Ctrl+Shift+Z
-
-
- Add Rectangle
- 添加矩形
-
-
- Add rectangle
- 添加矩形
-
-
- Add Triangle
- 添加三角形
-
-
- Add triangle
- 添加三角形
-
-
- Add Ellipse
- 添加椭圆
-
-
- Add html frame
- 添加HTML框架
-
-
- Export as PDF...
- 导出为PDF文件...
-
-
- Load from Template
- 从模板载入
-
-
- Load from template
- 从模板载入
-
-
- Save as Template
- 保存为模板
-
-
- Align Left
- 左对齐
-
-
- Align Center
- 居中对齐
-
-
- Align Right
- 右对齐
-
-
- Align Top
- 顶部对齐
-
-
- Align Center Vertical
- 垂直居中对齐
-
-
- Align Bottom
- 底部对齐
-
-
- &Quit
- 退出(&Q)
-
-
- Quit
- 退出
-
-
- Ctrl+Q
- Ctrl+Q
-
-
- Add Arrow
- 添加箭头
-
-
- Add arrow
- 添加箭头
+
@@ -20469,17 +16887,17 @@ Please try a lower resolution or a smaller papersize
Left
- 左边
+
Center
- 中间
+
Right
- 右边
+
@@ -20487,12 +16905,12 @@ Please try a lower resolution or a smaller papersize
Ascending
- 升序
+
Descending
- 降序
+
@@ -20535,25 +16953,11 @@ Please try a lower resolution or a smaller papersize
Use smart breaks changed
-
QgsComposerHtmlWidgetBase
-
- Form
- 窗体
-
-
- ...
- ...
-
-
- URL
- 网址
-
HTML Frame
@@ -20570,9 +16974,14 @@ Please try a lower resolution or a smaller papersize
主要属性
- Refresh HTML
- URL
+ 网址
+
+
+ ...
+ ...
Add Frame
-
Use smart page breaks
-
Maximum distance
-
mm
-
-
-
- QgsComposerItem
- Change item position
- 更改条目位置
+ Refresh HTML
+
QgsComposerItemWidget
- Frame color changed
更改边框颜色
- Background color changed
更改背景颜色
- Item opacity changed
- 更改条目透明度
-
-
- Item outline width
- 条目轮廓宽度
-
-
- Item frame toggled
- 切换边框显示状态
-
-
- Item position changed
更改条目位置
- Item frame join style
- Item outline width
+ 条目轮廓宽度
- Item frame join style
+
+
+ Item frame toggled
+ 切换边框显示状态
+
+
+ Item background toggled
切换条目背景
- Select background color
选择背景颜色
- Select frame color
选择边框颜色
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
更改条目标识符
- Item rotation changed
-
QgsComposerItemWidgetBase
-
- Form
- 窗体
-
-
- Opacity
- 透明度
-
-
- Outline width
- 轮廓宽度
-
-
- Position and size...
- 位置和大小...
-
-
- Show frame
- 显示边框
-
Global Options
全局选项
- Position and size
位置和大小
- Reference point
参照点
- X
横坐标
- Y
纵坐标
- Width
宽度
- Height
高度
- Page
-
- Rotation
-
- °
- °
+
- ...
- ...
-
-
- Frame
边框
- Thickness
- 厚度
-
-
- Color...
- 颜色...
-
-
- mm
-
- Join style
- 连接样式
+
- Background
- 背景
-
-
- Item ID
- 条目标识符
-
-
- Uuid (read-only)
- 唯一识别码（UUID，只读）
-
-
- Id
- 标识符
-
-
- Rendering
渲染
- Blending mode
混合模式
- Thickness
+ 厚度
+
+
+ Color...
+ 颜色...
+
+
+ Background
+ 背景
+
+
+ Transparency
透明度
- Frame color...
- 边框颜色...
+ Item ID
+ 条目标识符
- Background color...
- 背景颜色...
+ Id
+ 标识符
QgsComposerLabelWidget
-
- General options
- 通用选项
-
Label text HTML state changed
@@ -20861,32 +17217,24 @@ Please try a lower resolution or a smaller papersize
Label color changed
-
- Insert expression
插入表达式
- Label alignment changed
更改标签对齐方式
-
- Label id changed
- 更改标签标识符
-
-
- Label rotation changed
- 更改标签旋转角度
-
QgsComposerLabelWidgetBase
@@ -20895,6 +17243,11 @@ Please try a lower resolution or a smaller papersize
Label Options
标签选项
+
+ Label
+ 标签
+
Main properties
@@ -20910,6 +17263,16 @@ Please try a lower resolution or a smaller papersize
Insert an expression
插入表达式
+
+ Font
+ 字体
+
+
+ Font color...
+ 字体颜色...
+
Alignment
@@ -20920,6 +17283,36 @@ Please try a lower resolution or a smaller papersize
Vertical
垂直
+
+ Top
+ 顶部
+
+
+ Middle
+ 中间
+
+
+ Bottom
+ 底部
+
+
+ Left
+ 左边
+
+
+ Center
+ 中间
+
+
+ Right
+ 右边
+
Horizontal
@@ -20940,81 +17333,13 @@ Please try a lower resolution or a smaller papersize
mm
毫米
-
- Rotation
- 旋转角度
-
-
- °
- °
-
-
- Font
- 字体
-
-
- Horizontal Alignment:
- 水平对齐方式：
-
-
- Left
- 左边
-
-
- Center
- 中间
-
-
- Right
- 右边
-
-
- Vertical Alignment:
- 垂直对齐方式：
-
-
- Top
- 顶部
-
-
- Middle
- 中间
-
-
- Bottom
- 底部
-
-
- Margin
- 边距
-
-
- mm
- 毫米
-
-
- Label
- 标签
-
-
- Font color...
- 字体颜色...
-
QgsComposerLegend
+ Legend
- 图例
+ 图例
@@ -21040,10 +17365,6 @@ Please try a lower resolution or a smaller papersize
QgsComposerLegendWidget
-
- General Options
- 通用选项
-
Item
@@ -21067,7 +17388,7 @@ Please try a lower resolution or a smaller papersize
Legend title alignment changed
-
Wms Legend width
-
Wms Legend height
-
添加图例群组
- Map %1
地图 %1
- None
不透明
QgsComposerLegendWidgetBase
-
- Barscale Options
- 比例尺选项
-
-
- General
- 通用
-
-
- Map
- 地图
-
-
- Group Space
- 组间距
-
-
- Wrap text on
- 换行符
-
-
- Legend items
- 图例条目
-
-
- Auto Update
- 自动更新
-
-
- Update
- 更新
-
Legend Options
@@ -21251,96 +17537,54 @@ Please try a lower resolution or a smaller papersize
标题(&T)
- Title alignment:
- Map
+ 地图
- Left
- 左边
+ Wrap text on
+ 换行符
- Center
- 中间
+ Legend items
+ 图例条目
- Right
- 右边
-
-
- Update legend. User defined labels are preserved.
- 更新图例。用户定义的标签将被保留。
-
-
- Update item
- 更新条目
-
-
- Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
- 更新整个图例。图层按照主程序图例添加/移除。用户定义的标签将被删除。
-
-
- Update all
- 全部更新
-
-
- ...
- ...
+ Add group
+ 添加组
Show feature count for each class of vector layer.
为每一类矢量图层显示要素统计。
-
- Auto update
-
Fonts
字体
- Title Font...
- 标题字体...
+ Space above text using subgroup style.
+ 文本顶部的间距，使用亚组样式。
- Subgroup Font...
- 小组字体...
+ Subgroup space
+ 亚组间距
- Group Font...
- 组字体...
+ Space above symbol and symbol label.
+ 符号和符号标签顶部的间距。
- Title font...
-
-
- Subgroup font...
-
-
- Group font...
-
-
- Item font...
- Column space
+ 列间距
Split layers
分割图层
+
+ Spacing
+ 间距
+
+
+ mm
+ 毫米
+
+
+ Title alignment:
+
+
+ Left
+
+
+ Center
+
+
+ Right
+
+
+ Update legend. User defined labels are preserved.
+ 更新图例。用户定义的标签将被保留。
+
+
+ Update item
+ 更新条目
+
+
+ Update whole legend. Layers are added/removed according to main application legend. User defined labels will be deleted.
+ 更新整个图例。图层按照主程序图例添加/移除。用户定义的标签将被删除。
+
+
+ Update all
+ 全部更新
+
+
+ ...
+ ...
+
+
+ Auto update
+
+
+ Title font...
+
+
+ Subgroup font...
+
+
+ Group font...
+
+
+ Item font...
+
Symbol
@@ -21390,22 +17724,17 @@ Please try a lower resolution or a smaller papersize
WMS LegendGraphic
-
Legend width
-
Legend height
-
-
- Spacing
- 间距
+
Group Space
组间距
-
- Space above text using subgroup style.
- 文本顶部的间距，使用亚组样式。
-
-
- Subgroup space
- 亚组间距
-
-
- Space above symbol and symbol label.
- 符号和符号标签顶部的间距。
-
Symbol space
@@ -21452,11 +17766,6 @@ Please try a lower resolution or a smaller papersize
Box space
外框边距
-
- Column space
- 列间距
-
Title space
标题空间
-
- mm
- 毫米
-
-
- Layer Font...
- 图层字体...
-
-
- Item Font...
- 条目字体...
-
-
- Symbol width
- 符号宽度
-
-
- mm
- 毫米
-
-
- Symbol height
- 符号高度
-
-
- Layer space
- 图层间距
-
-
- Symbol space
- 符号间距
-
-
- Icon label space
- 图标标签间距
-
-
- Box space
- 外框边距
-
-
- Edit
- 编辑
-
-
- All
- 全部
-
-
- Add group
- 添加组
-
QgsComposerManager
@@ -21652,14 +17897,6 @@ Please try a lower resolution or a smaller papersize
Composer duplication failed.
版式副本创建失败。
-
- Change title
- 更改标题
-
-
- Title
- 标题
-
QgsComposerManagerBase
@@ -21702,832 +17939,568 @@ Please try a lower resolution or a smaller papersize
QgsComposerMap
- Map %1
地图 %1
- Map will be printed here
地图将会打印到此处
-
- Grid %1
-
QgsComposerMapWidget
- Cache
缓存
- Rectangle
- 矩形
-
-
- Render
渲染
- Rectangle
+ 矩形
+
+
+ Solid
实线
- Cross
十字
- Markers
-
-
- Decimal
小数
- DegreeMinute
度、分
- DegreeMinuteSecond
度、分、秒
+ No frame
- 无边框
+ 无边框
- Zebra
斑马线
- Map scale changed
+ 更改地图比例尺
+
+
+ Map rotation changed
+ 更改地图旋转角度
+
+
+ Map extent changed
+ 更改地图范围
+
+
+ Select font color
选择字体颜色
Select grid frame color
-
Select grid frame fill color
-
- Overview frame style changed
-
-
- Overview centering mode changed
-
-
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- 地图单位
-
-
- Millimeter
- 毫米
-
-
- Centimeter
-
-
- change...
- 更改...
-
-
- Grid line style changed
-
-
- Label font changed
- 更改标签字体
-
-
- Inside frame
- 边框内侧
-
-
- Outside frame
- 边框外侧
-
-
- Horizontal
- 水平
-
-
- Vertical
- 垂直
-
-
- Horizontal and Vertical
- 一个坐标水平，另一个坐标垂直
-
-
- Boundary direction
- 边界方向
-
-
- Change item width
- 更改条目宽度
-
-
- Change item height
- 更改条目高度
-
-
- Map scale changed
- 更改地图比例尺
-
-
- Map rotation changed
- 更改地图旋转角度
-
-
- Map extent changed
- 更改地图范围
-
-
- Canvas items toggled
切换条目视图
- None
无
- Grid markers style changed
- Overview frame style changed
+
- Cross width changed
- Overview centering mode changed
+
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
切换网格复选框状态
- Grid interval changed
更改网格间隔
- Grid offset changed
更改网格偏移量
- Grid pen changed
- 更改网格画笔
+ Grid line style changed
+
- Grid type changed
更改网格类型
+ Grid cross width changed
- 更改十字网格宽度
+ 更改十字网格宽度
- Annotation font changed
更改注记字体
- Label font changed
+ 更改标签字体
+
+
+ Annotation distance changed
更改注记距离
- Annotation format changed
更改注记格式
- Changed grid frame style
- 更改网格边框样式
-
-
- Changed grid frame width
- 更改网格边框宽度
-
-
- Changed grid frame line thickness
-
-
- Grid frame color changed
-
-
- Grid frame first fill color changed
-
-
- Grid frame second fill color changed
-
-
- Disabled
- 禁用
-
-
- Annotation position changed
- 更改注记位置
-
-
- Map %1
- 地图 %1
-
-
- Annotation toggled
切换注记显示状态
- Changed annotation direction
- 更改注记方向
-
-
- Changed annotation precision
更改注记精度
- General options
- 通用选项
+ Changed grid frame style
+ 更改网格边框样式
+
+
+ Changed grid frame width
+ 更改网格边框宽度
+
+
+ Changed grid frame line thickness
+
+
+ Grid frame color changed
+
+
+ Grid frame first fill color changed
+
+
+ Grid frame second fill color changed
+
+
+ Inside frame
+ 边框内侧
+
+
+ Outside frame
+ 边框外侧
+
+
+ Disabled
+ 禁用
+
+
+ Horizontal
+ 水平
+
+
+ Vertical
+ 垂直
+
+
+ Annotation position changed
+ 更改注记位置
+
+
+ Changed annotation direction
+ 更改注记方向
+
+
+ Map %1
+ 地图 %1
QgsComposerMapWidgetBase
-
- Map options
- 地图选项
-
-
- Width
- 宽度
-
-
- Height
- 高度
-
-
- Preview
- 预览
-
-
- Update preview
- 更新预览
-
-
- Map
- 地图
-
-
- Scale
- 比例
-
-
- X min
- 横坐标最小值
-
-
- Y min
- 纵坐标最小值
-
Map Options
地图选项
- Map
+ 地图
+
+
+ Main properties
主要属性
- Update preview
+ 更新预览
+
+
+ Scale
+ 比例
+
+
+ Map rotation
-
- X max
- 横坐标最大值
-
-
- Y max
- 纵坐标最大值
-
-
- Set to map canvas extent
- 将范围设置为地图视图范围
-
-
- Lock layers for map item
- 为地图条目锁定图层
-
-
- Show grid
- 显示网格
-
-
- Interval
- 间隔
-
-
- X
- 横坐标
-
-
- ...
- ...
-
-
- °
- °
-
-
- View extent in map canvas
-
-
- Controlled by atlas
-
-
- Margin around feature
- 要素周围的边距
-
-
- %
- %
-
-
- Fixed scale
- 固定比例尺
-
-
- Use one of the predefined scales of the project where the atlas feature best fits.
-
-
- Predefined scale (best fit)
-
-
- Y
- 纵坐标
-
-
- Offset
- 偏移
-
-
- mm
-
-
- Line style
- 线条样式
-
-
- change...
- 更改...
-
-
- Blend mode
- 混合模式
-
-
- Grid frame
-
-
- Frame size
-
-
- Frame line thickness
-
-
- Color...
- 颜色...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- 网格类型
-
-
- CRS
- 坐标参照系
-
-
- Interval units
-
-
- Map unit
- 地图单位
-
-
- Millimeter
- 毫米
-
-
- Centimeter
-
-
- No frame
- 无边框
-
-
- Zebra
- 斑马线
-
-
- Frame fill colors
-
-
- Draw coordinates
- 绘制坐标
-
-
- Format
- 格式
-
-
- Left
- 左边
-
-
- Right
- 右边
-
-
- Top
- 顶部
-
-
- Bottom
- 底部
-
-
- Font
- 字体
-
-
- Font color
- 字体颜色
-
-
- Font color...
- 字体颜色...
-
-
- Marker style
- 标记的样式
-
-
- Overview
- 鹰眼图
-
-
- Overview frame
- 鹰眼图边框
-
-
- Overview style
- 鹰眼图样式
-
-
- Change...
- 更改...
-
-
- Overview blending mode
- 鹰眼图混合模式
-
-
- Invert overview
- 倒置鹰眼图
-
-
- Center on overview
-
-
- Frame style
- 边框样式
-
-
- Frame width
- 边框宽度
-
-
- Draw annotation
- 绘制注记
-
-
- Font...
- 字体...
-
-
- Coordinate precision
- 坐标精度
-
-
- Rotation
- 旋转角度
-
-
- degrees
- 度
-
-
- Draw map canvas items
绘制地图视图条目
- Show grid?
- 显示网格？
+ Lock layers for map item
+ 为地图条目锁定图层
- Grid &type
- 网格类型(&T)
-
-
- Interval X
- 横坐标间隔
-
-
- Offset X
- 横坐标偏移
-
-
- Line width
- 线条宽度
-
-
- Annotation position
- 注记位置
-
-
- Annotation direction
- 注记方向
-
-
- Line color
- 线条颜色
-
-
- Distance to map frame
- 到地图边框的距离
-
-
- Interval Y
- 纵坐标间隔
-
-
- Offset Y
- 纵坐标偏移
-
-
- Cross width
- 十字宽度
-
-
- Extents
范围
- Grid
- 网格
+ X max
+ 横坐标最大值
+
+
+ Y min
+ 纵坐标最小值
+
+
+ Y max
+ 纵坐标最大值
+
+
+ Set to map canvas extent
+ 将范围设置为地图视图范围
+
+
+ X min
+ 横坐标最小值
+
+
+ View extent in map canvas
+
+
+ Controlled by atlas
+
+
+ Margin around feature
+
+
+ %
+
+
+ Fixed scale
+
+
+ Use one of the predefined scales of the project where the atlas feature best fits.
+
+
+ Predefined scale (best fit)
+
+
+ Show grid
+ 显示网格
+
+
+ Grid &type
+ 网格类型(&T)
+
+
+ Offset
+ 偏移
+
+
+ mm
+
+
+ Blend mode
+ 混合模式
+
+
+ Interval
+ 间隔
+
+
+ Grid frame
+
+
+ Frame size
+
+
+ Frame line thickness
+
+
+ Color...
+
+
+ Frame fill colors
+
+
+ Overview blending mode
+ 鹰眼图混合模式
+
+
+ Invert overview
+ 倒置鹰眼图
+
+
+ Center on overview
+
+
+ X
+ 横坐标
+
+
+ °
+
+
+ Y
+ 纵坐标
+
+
+ Cross width
+ 十字宽度
+
+
+ Frame style
+ 边框样式
+
+
+ Line style
+ 线条样式
+
+
+ change...
+ 更改...
+
+
+ Draw coordinates
+ 绘制坐标
+
+
+ Format
+ 格式
+
+
+ Left
+ 左边
+
+
+ Right
+ 右边
+
+
+ Top
+ 顶部
+
+
+ Bottom
+ 底部
+
+
+ Font
+ 字体
+
+
+ Font...
+ 字体...
+
+
+ Distance to map frame
+ 到地图边框的距离
+
+
+ Coordinate precision
+ 坐标精度
+
+
+ Font color...
+ 字体颜色...
+
+
+ Overview
+ 鹰眼图
+
+
+ Overview frame
+ 鹰眼图边框
+
+
+ Overview style
+ 鹰眼图样式
+
+
+ Change...
+ 更改...
@@ -22535,51 +18508,51 @@ Please try a lower resolution or a smaller papersize
Change item position
- 更改条目位置
+
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
- 版式
+
- Picture expression eval error: %1
-
@@ -22592,78 +18565,66 @@ Please try a lower resolution or a smaller papersize
Picture changed
更改图片
- Picture width changed
- 更改图片宽度
-
-
- Picture height changed
- 更改图片高度
-
-
- Expression based image path
-
- Picture rotation changed
更改图片旋转角度
- Select new preview directory
选择新的预览目录
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
切换旋转同步
- Rotation map changed
更改地图旋转角度
- Creating icon for file %1
- 正在为文件%1创建图标
-
-
- Map %1
地图%1
- General options
- 通用选项
+ Creating icon for file %1
+ 正在为文件%1创建图标
@@ -22673,14 +18634,6 @@ Please try a lower resolution or a smaller papersize
Picture Options
图片选项
-
- Preloaded images
- 预载入位图
-
-
- Load another
- 载入另一个
-
Picture
@@ -22691,100 +18644,106 @@ Please try a lower resolution or a smaller papersize
Main properties
主要属性
+
+ Image source
+
Path
路径
- Image source
-
-
- Placement
- 位置
-
-
- Resize mode
- 调整大小模式
-
-
- Zoom
- 缩放
-
-
- Stretch
-
-
- Clip
- 裁剪
-
-
- Zoom and resize frame
-
-
- Resize frame to image size
- ...
+ ...
Expression
- 表达式
+
+
+ Resize mode
+
+
+ Placement
+
+
+ Zoom
+
+
+ Stretch
+
+
+ Clip
+
+
+ Zoom and resize frame
+
+
+ Resize frame to image size
+
Top left
-
Top center
-
Top right
-
Middle left
-
Middle
- 中间
+
Middle right
-
Bottom left
-
Bottom center
-
Bottom right
-
影像搜索路径
- Image rotation
-
-
- Loading SVG previews...
- 载入SVG预览...
+ Remove
+ 移除
Add...
添加...
-
- °
- °
-
- Remove
- 移除
-
-
- Preview
- 预览
-
-
- ...
- ...
-
-
- Width
- 宽度
-
-
- Height
- 高度
-
-
- Rotation
- 旋转角度
+ Image rotation
+
Sync with map
与该地图同步
-
- Options
- 选项
-
-
- Picture options
- 图片选项
+
+ °
+ °
QgsComposerScaleBar
- units
-
- km
公里
- m
米
- miles
- 英里
+
- ft
-
- Nm
-
QgsComposerScaleBarWidget
Single Box
单框
Double Box
双框
Line Ticks Middle
刻度与线条交叉
Line Ticks Down
刻度位于线条下方
Line Ticks Up
刻度位于线条上方
Numeric
数字
@@ -22966,161 +18891,124 @@ Please try a lower resolution or a smaller papersize
Nautical Miles
-
- Select fill color
- 选择填充颜色
-
-
- Select alternate fill color
-
-
- Select font color
- 选择字体颜色
-
-
- Select stroke color
-
-
- Map %1
地图%1
- Scalebar map changed
更改比例尺地图
- Scalebar line width
更改比例尺线条宽度
- Scalebar segment size
更改比例尺线段大小
- Scalebar segments left
更改比例尺左边线段
- Number of scalebar segments changed
比例尺段数已改变
- Scalebar secondary color changed
-
-
- Scalebar changed to map units
-
-
- Scalebar changed to feet
-
-
- Scalebar changed to nautical miles
-
-
- Scalebar changed to meters
-
-
- Scalebar line join style
-
-
- Scalebar line cap style
-
-
- Scalebar n segments
- 更改比例尺右边线段
-
-
- Scalebar height changed
更改比例尺高度
- Scalebar font changed
更改比例尺字体
- Scalebar font color changed
更改比例尺字体颜色
- Scalebar color changed
更改比例尺颜色
- Scalebar stroke color changed
更改比例尺描边颜色
- Scalebar unit text
更改比例尺单位标签文本
- Scalebar map units per segment
更改比例尺上每一格线段代表的地图单位
- Scalebar style changed
更改比例尺样式
- Scalebar label bar space
更改比例尺标签间距
- Scalebar box content space
与比例尺外框之间的边距
- Scalebar alignment
更改比例尺对齐方式
- Scalebar unit changed
- 更改比例尺单位
+ Scalebar changed to map units
+
- General options
- 通用选项
+ Scalebar changed to feet
+
+
+ Scalebar changed to nautical miles
+
+
+ Scalebar changed to meters
+
+
+ Scalebar line join style
+
+
+ Scalebar line cap style
+
@@ -23140,11 +19028,31 @@ Please try a lower resolution or a smaller papersize
Main properties
主要属性
+
+ Map
+ 地图
+
+
+ Style
+ 样式
+
+
+ Units
+ 单位
+
Label
标签
+
+ Map units per bar unit
+ 比例尺每一格地图单位代表的实际长度
+
Height
高度
+
+ mm
+ 毫米
+
Display
@@ -23199,12 +19115,17 @@ Please try a lower resolution or a smaller papersize
Join style
- 连接样式
+
Cap style
- 端点样式
+
+
+ Alignment
+ 对齐
Secondary fill color...
-
-
- Stroke color...
描边颜色...
-
- Color...
- 颜色...
-
-
- Segment size (map units)
- 比例尺每一格代表的实际距离（地图单位）
-
-
- Map units per bar unit
- 比例尺每一格地图单位代表的实际长度
-
-
- Style
- 样式
-
-
- Map
- 地图
-
-
- Unit label
- 单位标签
-
-
- Scale bar
- 比例尺
-
-
- Right segments
- 格（右边）
-
-
- Left segments
- 格（左边）
-
-
- Units
- 单位
-
-
- mm
- 毫米
-
-
- Height
- 高度
-
-
- Line width
- 线条宽度
-
-
- Label space
- 标签间距
-
-
- Box space
- 外框边距
-
-
- Alignment
- 对齐
-
QgsComposerShapeWidget
-
- General options
- 通用选项
-
Ellipse
椭圆
Rectangle
矩形
Triangle
三角形
- Shape style changed
-
- Shape radius changed
-
- Shape rotation changed
- 更改形状旋转角度
-
-
- Shape type changed
更改形状类型
-
- Select outline color
- 选择轮廓颜色
-
-
- Shape outline color
- 形状轮廓颜色
-
-
- Shape outline width
- 形状轮廓宽度
-
-
- Shape transparency toggled
- 切换形状的透明度状态
-
-
- Select fill color
- 选择填充颜色
-
-
- Shape fill color
- 形状填充颜色
-
QgsComposerShapeWidgetBase
@@ -23402,52 +19213,22 @@ Please try a lower resolution or a smaller papersize
Corner radius
-
mm
-
Style
- 样式
+
Change...
- 更改...
-
-
- Rotation
- 旋转角度
-
-
- °
- °
-
-
- Shape outline color...
- 形状轮廓颜色...
-
-
- Outline width
- 轮廓宽度
-
-
- Transparent fill
- 透明填充
-
-
- Shape fill Color...
- 形状填充颜色...
-
-
- Rotation
- Rotation
- Rotation
- 旋转角度
+
@@ -23455,30 +19236,26 @@ Please try a lower resolution or a smaller papersize
Descending
- 降序
+
Ascending
- 升序
+
Attribute
- 属性
+
Sort Order
-
QgsComposerTableWidget
-
- General options
- 通用选项
-
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
- 基于表达式的过滤器
+
Table header alignment changed
-
QgsComposerTableWidgetBase
-
- Form
- 窗体
-
-
- Table
- 表格
-
-
- Layer
- 图层
-
-
- Attributes...
- 属性...
-
-
- Show only visible features
- 仅显示可见要素
-
-
- Composer map
- 版式地图
-
Attribute Table
@@ -23617,19 +19366,19 @@ Please try a lower resolution or a smaller papersize
主要属性
- Refresh table data
- Layer
+ 图层
- Filter with
- 过滤用
+ Attributes...
+ 属性...
- ...
- ...
+ Composer map
+ 版式地图
Margin
边距
+
+ Show only visible features
+ 仅显示可见要素
+
+
+ Refresh table data
+
+
+ Filter with
+
+
+ ...
+
mm
-
Header font...
-
Content font...
-
Header alignment
-
Follow column alignment
-
Left
- 左边
+
Center
- 中间
+
Right
- 右边
-
-
- Grid stroke width
- 网格描边宽度
-
-
- Grid color
- 网格颜色
-
-
- Header Font...
- 标题字体...
-
-
- Content Font...
- 内容字体...
+
@@ -23727,9 +19480,9 @@ Please try a lower resolution or a smaller papersize
矢量图例选项
- Title
- 标题
+ Preview
+ 预览
地图
- Font
- 字体
-
-
- Box
- 矩形框
-
-
- Preview
- 预览
+ Title
+ 标题
ID
标识符
+
+ Box
+ 矩形框
+
+
+ Font
+ 字体
+
QgsComposerView
- Quantum GIS
- Quantum GIS
+ QGIS
+ QGIS
+
+
+ Label added
+ 添加标签
+
+
+ Scale bar added
+ 添加比例尺
+
+
+ Legend added
+ 添加图例
+
+
+ Picture added
+ 添加图片
+
+
+ Table added
+ 添加表格
+
+
+ Shape added
+ 添加形状
Move item content
移动条目内容
+
+ Arrow added
+ 添加箭头
+
+
+ Map added
+ 添加地图
+
Html item added
@@ -23801,164 +19595,111 @@ Please try a lower resolution or a smaller papersize
Zoom item content
缩放条目内容
-
- Arrow added
- 添加箭头
-
-
- Label added
- 添加标签
-
-
- Map added
- 添加地图
-
-
- Scale bar added
- 添加比例尺
-
-
- QGIS
- QGIS
-
-
- Legend added
- 添加图例
-
-
- Picture added
- 添加图片
-
-
- Shape added
- 添加形状
-
-
- Table added
- 添加表格
-
QgsComposition
- Label added
添加标签
- Map added
添加地图
- Arrow added
添加箭头
- Scale bar added
添加比例尺
- Shape added
添加形状
- Picture added
添加图片
- Legend added
添加图例
- Table added
添加表格
- Aligned items left
左对齐条目
- Aligned items horizontal center
水平中心对齐选项
- Aligned items vertical center
垂直中心对齐选项
- Aligned items hcenter
- 水平居中条目
-
-
- Aligned items right
右对齐条目
- Aligned items top
顶部对齐条目
- Aligned items vcenter
- 垂直居中条目
-
-
- Aligned items bottom
底部对齐条目
- Items locked
-
- Items unlocked
-
- Item z-order changed
更改条目的深度顺序
- Remove item group
移除条目群组
- Frame deleted
删除边框
- Item deleted
删除条目
- Multiframe removed
移除多边框
@@ -24003,173 +19744,6 @@ Please try a lower resolution or a smaller papersize
QgsCompositionWidget
-
- Landscape
- 横向
-
-
- Portrait
- 纵向
-
-
- Map %1
-
-
- Legal (8.5x14 in)
- Legal（8.5x14英寸）
-
-
- ANSI A (Letter; 8.5x11 in)
- ANSI A（信纸；8.5x11英寸）
-
-
- ANSI B (Tabloid; 11x17 in)
- ANSI B（小报；11x17英寸）
-
-
- ANSI C (17x22 in)
- ANSI C（17x22英寸）
-
-
- ANSI D (22x34 in)
- ANSI D（22x34英寸）
-
-
- ANSI E (34x44 in)
- ANSI E（34x44英寸）
-
-
- Arch A (9x12 in)
- Arch A（9x12英寸）
-
-
- Arch B (12x18 in)
- Arch B（12x18英寸）
-
-
- Arch C (18x24 in)
- Arch C（18x24英寸）
-
-
- Arch D (24x36 in)
- Arch D（24x36英寸）
-
-
- Arch E (36x48 in)
- Arch E（36x48英寸）
-
-
- Arch E1 (30x42 in)
- Arch E1（30x42英寸）
-
-
- Custom
- 自定义
-
-
- A5 (148x210 mm)
- A5（148x210毫米）
-
-
- Select grid color
- 选择网格颜色
-
-
- A4 (210x297 mm)
- A4（210x297毫米）
-
-
- A3 (297x420 mm)
- A3（297x420毫米）
-
-
- A2 (420x594 mm)
- A2（420x594毫米）
-
-
- A1 (594x841 mm)
- A1（594x841毫米）
-
-
- A0 (841x1189 mm)
- A0（841x1189毫米）
-
-
- B5 (176 x 250 mm)
- B5（176x250毫米）
-
-
- B4 (250 x 353 mm)
- B4（250x353毫米）
-
-
- B3 (353 x 500 mm)
- B3（353x500毫米）
-
-
- B2 (500 x 707 mm)
- B2（500x707毫米）
-
-
- B1 (707 x 1000 mm)
- B1（707x1000毫米）
-
-
- B0 (1000 x 1414 mm)
- B0（1000x1414毫米）
-
-
- Legal (8.5x14 inches)
- Legal（8.5x14英寸）
-
-
- Solid
- 实线
-
-
- Dots
- 虚线（点）
-
-
- Crosses
- 十字
-
mm
@@ -24181,48 +19755,151 @@ Please try a lower resolution or a smaller papersize
英寸
- ANSI A (Letter; 8.5x11 inches)
- ANSI A（信纸；8.5x11英寸）
+ Landscape
+ 横向
- ANSI B (Tabloid; 11x17 inches)
- ANSI B（小报；11x17英寸）
+ Portrait
+ 纵向
- ANSI C (17x22 inches)
- ANSI C（17x22英寸）
+ Map %1
+
- ANSI D (22x34 inches)
- ANSI D（22x34英寸）
+ A5 (148x210 mm)
+ A5（148x210毫米）
- ANSI E (34x44 inches)
- ANSI E（34x44英寸）
+ A4 (210x297 mm)
+ A4（210x297毫米）
- Arch A (9x12 inches)
- Arch A（9x12英寸）
+ A3 (297x420 mm)
+ A3（297x420毫米）
- Arch B (12x18 inches)
- Arch B（12x18英寸）
+ A2 (420x594 mm)
+ A2（420x594毫米）
- Arch C (18x24 inches)
- Arch C（18x24英寸）
+ A1 (594x841 mm)
+ A1（594x841毫米）
- Arch D (24x36 inches)
- Arch D（24x36英寸）
+ A0 (841x1189 mm)
+ A0（841x1189毫米）
- Arch E (36x48 inches)
- Arch E（36x48英寸）
+ B5 (176 x 250 mm)
+ B5（176x250毫米）
- Arch E1 (30x42 inches)
- Arch E1（30x42英寸）
+ B4 (250 x 353 mm)
+ B4（250x353毫米）
+
+
+ B3 (353 x 500 mm)
+ B3（353x500毫米）
+
+
+ B2 (500 x 707 mm)
+ B2（500x707毫米）
+
+
+ B1 (707 x 1000 mm)
+ B1（707x1000毫米）
+
+
+ B0 (1000 x 1414 mm)
+ B0（1000x1414毫米）
+
+
+ Legal (8.5x14 in)
+ Legal（8.5x14英寸）
+
+
+ ANSI A (Letter; 8.5x11 in)
+ ANSI A（信纸；8.5x11英寸）
+
+
+ ANSI B (Tabloid; 11x17 in)
+ ANSI B（小报；11x17英寸）
+
+
+ ANSI C (17x22 in)
+ ANSI C（17x22英寸）
+
+
+ ANSI D (22x34 in)
+ ANSI D（22x34英寸）
+
+
+ ANSI E (34x44 in)
+ ANSI E（34x44英寸）
+
+
+ Arch A (9x12 in)
+ Arch A（9x12英寸）
+
+
+ Arch B (12x18 in)
+ Arch B（12x18英寸）
+
+
+ Arch C (18x24 in)
+ Arch C（18x24英寸）
+
+
+ Arch D (24x36 in)
+ Arch D（24x36英寸）
+
+
+ Arch E (36x48 in)
+ Arch E（36x48英寸）
+
+
+ Arch E1 (30x42 in)
+ Arch E1（30x42英寸）
+
+
+ Custom
+ 自定义
@@ -24232,240 +19909,119 @@ Please try a lower resolution or a smaller papersize
Composition
结构
-
- Presets
- 预设
-
-
- ...
- ...
-
-
- Width
- 宽度
-
-
- Height
- 高度
-
-
- Orientation
- 纸张方向
-
-
- Export resolution
- 导出分辨率
-
-
- World file on
-
-
- Change...
- 更改...
-
-
- Page background
-
-
- Guides and Grid
-
-
- Grid spacing
-
-
- Snap tolerance
- 对齐容差
-
-
- px
- 像素
-
-
- Grid
- 网格
-
-
- Spacing
- 间距
-
-
- mm
- 毫米
-
-
- Grid offset
- 网格偏移
-
-
- x:
- 横坐标：
-
-
- y:
- 纵坐标：
-
-
- Pen width
- 画笔宽度
-
-
- Selection tolerance
- 选择容差
-
-
- Color...
- 颜色...
-
-
- Snap to alignments
- 对齐到对中点
-
-
- Tolerance
- 容差
-
-
- Units
- 单位
-
-
- Size
- 大小
-
-
- Number of pages
- 纸张数量
-
-
- Snapping
- 对齐
-
-
- Snap to grid
- 对齐到网格
-
-
- Print as raster
- 打印为
-
-
- Grid color
- 网格颜色
-
-
- Grid style
- 网格类型
-
Paper and quality
纸张和质量
- Resolution
- 分辨率
+ Presets
+ 预设
- Width
+ 宽度
+
+
+ Height
+ 高度
+
+
+ Units
+ 单位
+
+
+ Number of pages
+ 纸张数量
+
+
+ Orientation
+ 纸张方向
+
+
+ Export resolution
+ 导出分辨率
+
+
+ Print as raster
+ 打印为
+
+
+ Change...
+
+
+ Page background
+
+
+ Grid
+
+
+ dpi
dpi
- Quality
- 质量
+ World file on
+
- Width
- 宽度
+ mm
+ 毫米
- Height
- 高度
+ Grid offset
+ 网格偏移
- Spacing
- 网格间距
+ x:
+ 横坐标：
- X offset
- 横坐标偏移
+ y:
+ 纵坐标：
- Y offset
- 纵坐标偏移
+ Spacing
+ 间距
- Pen width
- 画笔宽度
+ Snap to alignments
+ 对齐到对中点
- Selection tolerance (mm)
- 选择容差（毫米）
+ Tolerance
+ 容差
QgsConfigureShortcutsDialog
-
- None
- 空
-
-
- Set default (%1)
- 设为默认（%1）
-
-
- Input:
- 输入：
-
-
- Change
- 更改
-
-
- Shortcut conflict
- 快捷键冲突
-
-
- This shortcut is already assigned to action %1. Reassign?
- 这个快捷方式已被指派给动作%1。要重新指派吗？
-
Configure shortcuts
@@ -24481,6 +20037,12 @@ Please try a lower resolution or a smaller papersize
Shortcut
快捷键
+
+ Change
+ 更改
+
Set none
@@ -24491,6 +20053,16 @@ Please try a lower resolution or a smaller papersize
Set default
设为默认
+
+ Load...
+ 载入...
+
+
+ Save...
+ 保存...
+
Save shortcuts
@@ -24558,14 +20130,29 @@ Please try a lower resolution or a smaller papersize
这个文件包含别的语言环境下创建的快捷键，因此不能使用。
- Load...
- 载入...
+ None
+ 空
- Save...
- 保存...
+ Set default (%1)
+ 设为默认（%1）
+
+
+ Input:
+ 输入：
+
+
+ Shortcut conflict
+ 快捷键冲突
+
+
+ This shortcut is already assigned to action %1. Reassign?
+ 这个快捷方式已被指派给动作%1。要重新指派吗？
@@ -24586,46 +20173,19 @@ Please try a lower resolution or a smaller papersize
<h3>糟糕！QGIS找不到该窗体的帮助。</h3>找不到你所使用的语言版本的%1帮助文件。<br>如果你想创建该语言版本的帮助文件，请联系QGIS开发团队
-
- QgsContinuousColorDialogBase
-
- Continuous color
- 连续色
-
-
- Draw polygon outline
- 绘制多边形轮廓
-
-
- Maximum value
- 最大值
-
-
- Outline width
- 轮廓宽度
-
-
- Minimum value
- 最小值
-
-
- Classification field
- 类别字段
-
-
QgsCoordinateTransform
+
+ The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
+ 源坐标参照系无效。坐标无法投影。坐标参照系为：%1
+
CRS
坐标参照系
-
- The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
- 源坐标参照系无效。坐标无法投影。坐标参照系为：%1
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
@@ -24651,64 +20211,6 @@ Error: %5
错误: %5
-
- QgsCopyrightLabelPlugin
-
- Bottom Left
- 左下
-
-
- Top Left
- 左上
-
-
- Top Right
- 右上
-
-
- &Decorations
- 装饰 (&D)
-
-
- Creates a copyright label that is displayed on the map canvas.
- 在地图视图上创建一个版权标签。
-
-
- Bottom Right
- 右下
-
-
-
- QgsCopyrightLabelPluginGuiBase
-
- Copyright Label Plugin
- 版权标签插件
-
-
- Bottom Left
- 左下
-
-
- Top Left
- 左上
-
-
- Bottom Right
- 右下
-
-
- Top Right
- 右上
-
-
- Horizontal
- 水平
-
-
- Vertical
- 垂直
-
-
QgsCptCityBrowserModel
@@ -24729,6 +20231,11 @@ Error: %5
colors
颜色
+
+ discrete
+ 离散
+
continuous
@@ -24739,11 +20246,6 @@ Error: %5
continuous (multi)
连续（多个）
-
- discrete
- 离散
-
variants
@@ -24752,30 +20254,6 @@ Error: %5
QgsCptCityColorRampV2Dialog
-
- Error - cpt-city gradient files not found.
-
-You have two means of installing them:
-
-1) Install the "Color Ramp Manager" python plugin (you must enable Experimental plugins in the plugin manager) and use it to download latest cpt-city package.
-You can install the entire cpt-city archive or a selection for QGIS.
-
-2) Download the complete archive (in svg format) and unzip it to your QGis settings directory [%1] .
-
-This file can be found at [%2]
-and current file is [%3]
- 错误——未找到 cpt-city 梯度文件。
-
-有两种方法安装这些文件：
-
-一、安装一个名为“颜色渐变管理器（Color Ramp Manager）”的python插件，使用这个插件来下载最新的cpt-city包（必须在插件管理器中启用试验性插件）。
-可以安装整个cpt-city存档文件或选择一部分来安装。
-
-二、下载完整的存档文件（svg格式）并解压到QGIS设置目录 [%1]。
-
-该文件可在 [%2] 找到
-当前文件为 [%3]
-
Selections by theme
@@ -24924,40 +20402,11 @@ and current file is [%3]
Control rendering order
- 控制渲染顺序
+
QgsCustomProjectionDialog
-
- Delete Projection Definition?
- 删除投影的定义?
-
-
- Deleting a projection definition is not reversable. Do you want to delete it?
- 删除投影的 定义是不可恢复的。您要删除它吗?
-
-
- %1 of %2
- 第%1，共%2
-
-
- Abort
- 放弃
-
-
- New
- 新建
-
-
- * of %1
- 第*，共%1
-
-
- new CRS
- 新建坐标参照系
-
QGIS Custom Projection
QGIS自定义投影
-
- The proj4 definition of '%1' is not valid.
- “%1”的proj4投影定义无效。
-
This proj4 projection definition is not valid.
该proj4投影定义无效.
+
+ new CRS
+ 新建坐标参照系
+
+
+ The proj4 definition of '%1' is not valid.
+ “%1”的proj4投影定义无效。
+
Northing and Easthing must be in decimal form.
@@ -24992,49 +20446,13 @@ and current file is [%3]
Error
错误
-
- Please give the projection a name before pressing save.
- 按保存前请给投影取一个名字。
-
-
- Please add the parameters before pressing save.
- 按保存前请添加参数。
-
-
- Please add a proj= clause before pressing save.
- 按保存前请添加proj=子句。
-
-
- This proj4 ellipsoid definition is not valid. Please add a ellips= clause before pressing save.
- COMMENTED OUT
- 该proj4椭球定义无效。在按下保存之前，请添加“ellips=”子句。
-
-
- Please correct before pressing save.
- 按保存前请更正。
-
QgsCustomProjectionDialogBase
- |<
- |<
-
-
- <
- <
-
-
- 1 of 1
- 第 1，共 1
-
-
- >
- >
-
-
- >|
- >|
+ Custom Coordinate Reference System Definition
+ 自定义坐标参照系
自定义
- Test
- 测试
+ ID
+ 标识符
- Calculate
- 计算
-
-
- Geographic / WGS84
- 地理坐标系 / WGS84
+ You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
+ 你可已在此处定义你自己的坐标参照系。定义必须符合proj4指定坐标参照系的格式。
参数
- *
- *
+ Test
+ 测试
- S
- 南
+ Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
+ 使用下面的文本框来测试你正在定义的坐标参照系。输入一组经度、纬度的转换结果都已知（如通过读取地图获知转换结果）的坐标值，然后点击计算按钮，对比看看你定义的坐标参照系是否准确。
- X
- 横坐标
+ Geographic / WGS84
+ 地理坐标系 / WGS84
+
+
+ Destination CRS
+ 自定义坐标参照系
East
东
-
- Custom Coordinate Reference System Definition
- 自定义坐标参照系
-
-
- ID
- 标识符
-
-
- You can define your own custom Coordinate Reference System (CRS) here. The definition must conform to the proj4 format for specifying a CRS.
- 你可已在此处定义你自己的坐标参照系。定义必须符合proj4指定坐标参照系的格式。
-
Name:
@@ -25130,14 +20536,9 @@ and current file is [%3]
移除
- Use the text boxes below to test the CRS definition you are creating. Enter a coordinate where both the lat/long and the transformed result are known (for example by reading off a map). Then press the calculate button to see if the CRS definition you are creating is accurate.
- 使用下面的文本框来测试你正在定义的坐标参照系。输入一组经度、纬度的转换结果都已知（如通过读取地图获知转换结果）的坐标值，然后点击计算按钮，对比看看你定义的坐标参照系是否准确。
-
-
- Destination CRS
- 自定义坐标参照系
+ Calculate
+ 计算
@@ -25169,10 +20570,6 @@ and current file is [%3]
Customization files (*.ini)
自定义文件 (*.ini)
-
- Widgets
- 控件
-
QgsCustomizationDialogBase
@@ -25422,10 +20819,6 @@ and current file is [%3]
<b>Current definition %1:</b><br>%2
<b>当前定义%1：</b><br>%2
-
- <b>Current definition%1:</b><br>%2
- <b>当前定义%1：</b><br>%2
-
string
@@ -25499,19 +20892,11 @@ and current file is [%3]
Data defined properties
由数据定义属性
-
- New Row
- 新的行
-
Property
属性
-
- Field
- 字段
-
Expression
@@ -25540,22 +20925,22 @@ and current file is [%3]
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -25563,68 +20948,68 @@ and current file is [%3]
Form
- 窗体
+
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
- ...
+
Widget display
-
calendar popup
-
default
- 默认
+
custom
-
preview
-
@@ -25632,13 +21017,13 @@ and current file is [%3]
File '%1' not found in directory '%2'
-
unknown
- 未知
+
@@ -25646,50 +21031,46 @@ and current file is [%3]
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Destination CRS
-
Source CRS
-
Layer
- 图层
+
QgsDbSourceSelectBase
-
- Add PostGIS Table(s)
- 添加PostGIS表
-
Add PostGIS layers
@@ -25744,7 +21125,7 @@ and current file is [%3]
Hold dialog open
-
搜索列
-
- QgsDbTableModel
-
- Table
- 表
-
-
- Type
- 类型
-
-
- Sql
- Sql
-
-
- Point
- 点
-
-
- Line
- 线
-
-
- Polygon
- 多边形
-
-
QgsDecorationCopyright
@@ -25834,24 +21188,12 @@ and current file is [%3]
&Enter your copyright label here:
输入你的版权标签(&E)：
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana';">© QGIS 2009</span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana';">© QGIS 2009</span></p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -25904,10 +21246,6 @@ p, li { white-space: pre-wrap; }
Color
颜色
-
- &Color
- 颜色(&C)
-
QgsDecorationGrid
@@ -25942,14 +21280,10 @@ p, li { white-space: pre-wrap; }
QgsDecorationGridDialog
-
- Dialog
- 对话框
-
Grid properties
-
Vertical
垂直
-
- Horizontal and vertical
- 一个坐标水平，另一个坐标垂直
-
Boundary direction
@@ -26332,10 +21662,6 @@ p, li { white-space: pre-wrap; }
Color of bar
比例尺颜色
-
- Click to select the color
- 点击选择颜色
-
Size of bar
@@ -26375,227 +21701,8 @@ p, li { white-space: pre-wrap; }
删除属性
-
- QgsDelimitedTextPlugin
-
- &Delimited text
- 以分隔符分割的文本 (&D)
-
-
- &Add Delimited Text Layer
- 添加以分隔符分割的文本数据图层(&A)
-
-
- DelimitedTextLayer
- 以分隔符分割的文本数据图层
-
-
- Add a delimited text file as a map layer. The file must have a header row containing the field names. The file must either contain X and Y fields with coordinates in decimal units or a WKT field.
- 将以分隔符分割的文本数据添加为地图图层。文件第一行必须是包含各列字段名称的标题行。此外文件还必须包含横坐标、纵坐标字段或一个WKT字段，内容为十进制格式的坐标数值。
-
-
- Delimited Text
- 分隔文本文件
-
-
- Cannot get Delimited Text select dialog from provider.
- 无法从数据源获取分隔文本选择对话框。
-
-
-
- QgsDelimitedTextPluginGui
-
- No layer name
- 没有图层名称
-
-
- Please enter a layer name before adding the layer to the map
- 添加图层以前，请输入一个图层名称
-
-
- Text files
- 文本文件
-
-
- All files
- 全部文件
-
-
- No delimiter
- 没有分隔符
-
-
- Please specify a delimiter prior to parsing the file
- 解析文件前，请指定一个分隔符
-
-
- Choose a delimited text file to open
- 选择一个将要打开的分隔文本文件
-
-
-
- QgsDelimitedTextPluginGuiBase
-
- Create a Layer from a Delimited Text File
- 从分隔文本文件创建一个图层
-
-
- File Name
- 文件名称
-
-
- Browse...
- 浏览...
-
-
- Selected delimiters
- 选择文本分隔符
-
-
- Semicolon
- 分号
-
-
- Tab
- 制表符
-
-
- Space
- 空格
-
-
- Comma
- 逗号
-
-
- Colon
- 冒号
-
-
- Start import at row
- 数据起始行
-
-
- The file contains X and Y coordinate columns
- 包含横坐标列和纵坐标列的文件
-
-
- X Y fields
- 横坐标和纵坐标字段
-
-
- <p align="right">X field</p>
- <p align="right">横坐标</p>
-
-
- Name of the field containing x values
- 包含横坐标值的字段名称
-
-
- Name of the field containing x values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- 包含横坐标值的字段名称。从列表中选择一个字段。该列表通过解析文本文件的首行而生成的.
-
-
- <p align="right">Y field</p>
- <p align="right">纵坐标</p>
-
-
- Name of the field containing y values
- 包含纵坐标值的字段名称
-
-
- Name of the field containing y values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- 包含纵坐标值的字段名称。从列表中选择一个字段。该列表通过解析文本文件的首行而生成的.
-
-
- Layer name
- 图层名称
-
-
- Name to display in the map legend
- 显示在地图图例中的名称
-
-
- Name displayed in the map legend
- 显示在地图图例中的名称
-
-
- Delimiter
- 分隔符
-
-
- Delimiter to use when splitting fields in the text file. The delimiter can be more than one character.
- 在文本文件中分隔字段的分隔符。分隔符可以是多个字符.
-
-
- Delimiter to use when splitting fields in the delimited text file. The delimiter can be 1 or more characters in length.
- 在文本文件中分隔字段的分隔符。分隔符可以是一个或多个字符.
-
-
- Delimited text file
- 分隔文本文件
-
-
- Full path to the delimited text file
- 分隔文本文件的完整路径
-
-
- Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
- 分隔文本文件的完整路径。为了能正确地解析文件中的字段，分隔符必须在输入文件名称之前定义。使用右边的浏览按钮来选择输入文件.
-
-
- ...
- ...
-
-
- Browse to find the delimited text file to be processed
- 浏览并找到将要处理的分隔文本文件
-
-
- Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
- 使用这个按钮来浏览分隔文本文件的位置。这个按钮只有在<i>分隔符</i>框中输入了分隔符后才可用。一旦选择了一个文件，横坐标和纵坐标字段的下拉列表会用文本文件中的字段来填充.
-
-
- WKT field
- WKT字段
-
-
- Decimal point
- 小数点
-
-
- Sample text
- 样例文本
-
-
- Plain characters
- 普通字符作为分隔符
-
-
- Regular expression
- 以正则表达式作为分隔符
-
-
- Type
- 类型
-
-
QgsDelimitedTextProvider
-
- Note: the following lines were not loaded because Qgis was unable to determine values for the x and y coordinates:
-
- 注意：以下各行未被载入，因为QGIS无法确定横坐标和纵坐标的值：
-
-
- Error
- 错误
-
-
- Note: the following lines were not loaded because QGIS was unable to determine values for the x and y coordinates:
-
- 注意：以下各行未被载入，因为QGIS无法确定横坐标和纵坐标的值：
-
File type string in %1 is not correctly formatted
@@ -26663,16 +21770,6 @@ p, li { white-space: pre-wrap; }
The following lines were not loaded into QGIS due to errors:
因发生错误，以下各行未被载入QGIS：
-
- Invalid subset string %1 for %2
- %2的子集字符串%1无效
-
-
- The file has been updated by another application - reloading
- 文件已被其他程序更新 - 正在重新载入
-
Delimited text file errors
分隔文本文件错误
+
+ Invalid subset string %1 for %2
+ %2的子集字符串%1无效
+
+
+ The file has been updated by another application - reloading
+ 文件已被其他程序更新 - 正在重新载入
+
QgsDelimitedTextSourceSelect
@@ -26702,10 +21809,6 @@ p, li { white-space: pre-wrap; }
No delimiters set
没有设定分隔符
-
- Please one or more characters to use as the delimiter, or choose a different delimiter type
- 请输入一个或多个字符作为分隔符，或者选择另一种分隔符类型
-
Use one or more characters as the delimiter, or choose a different delimiter type
@@ -26806,10 +21909,6 @@ p, li { white-space: pre-wrap; }
%1 badly formatted records discarded from sample data
样例数据中有%1条格式凌乱的记录被丢弃
-
- Well Known Text files
- Well Known Text 文件
-
All files
@@ -26823,6 +21922,303 @@ p, li { white-space: pre-wrap; }
Create a Layer from a Delimited Text File
从分隔文本文件创建一个图层
+
+ File Name
+ 文件名称
+
+
+ Full path to the delimited text file
+ 分隔文本文件的完整路径
+
+
+ Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
+ 分隔文本文件的完整路径。为了能正确地解析文件中的字段，分隔符必须在输入文件名称之前定义。使用右边的浏览按钮来选择输入文件.
+
+
+ Layer name
+ 图层名称
+
+
+ Name to display in the map legend
+ 显示在地图图例中的名称
+
+
+ Name displayed in the map legend
+ 显示在地图图例中的名称
+
+
+ Browse to find the delimited text file to be processed
+ 浏览以寻找将要处理的分隔文本文件
+
+
+ Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
+ 使用这个按钮来浏览分隔文本文件的位置。这个按钮只有在<i>分隔符</i>框中输入了分隔符后才可用。一旦选择了一个文件，横坐标和纵坐标字段的下拉列表会用文本文件中的字段来填充。
+
+
+ Browse...
+ 浏览...
+
+
+ The file is a comma separated value file, fields delimited by commas and quoted by "
+ 该文件中值被逗号分隔，字段由逗号分隔并由"引出
+
+
+ Each line in the file is split using a regular expression to define the end of each field
+ 文件中的每一行都被一个用于定义每个字段结尾的正则表达式分隔
+
+
+ Tab
+ 制表符
+
+
+ Space
+ 空格
+
+
+ Comma
+ 逗号
+
+
+ Encoding
+ 编码
+
+
+ Select the file encoding
+ 选择文件编码
+
+
+ X and Y coordinates are expressed in degrees/minutes/seconds
+ 横坐标和纵坐标以度/分/秒格式表达
+
+
+ DMS coordinates
+ 度分秒格式坐标
+
+
+ Geometry field
+ 几何图形字段
+
+
+ Name of the field containing well known text value
+ 包含well known text值的字段名称
+
+
+ Geometry type
+ 几何图形类型
+
+
+ Detect
+ 检测
+
+
+ Point
+ 点
+
+
+ Line
+ 行
+
+
+ Polygon
+ 多边形
+
+
+ Record options
+ 记录选项
+
+
+ Field options
+ 字段选项
+
+
+ File format
+ 文件格式
+
+
+ Number of header lines to discard
+ 从文件开头起忽略的行数
+
+
+ The number of lines to discard from the beginning of the file
+ 从文件开头起要忽略的行数
+
+
+ Field names are read from the first record. If not selected then fields are numbered
+ 从第一行读入字段名称。若不勾选此项，则以数字序号为字段名
+
+
+ First record has field names
+ 首行包含字段名称
+
+
+ CSV (comma separated values)
+ CSV格式（值用逗号分隔）
+
+
+ Fields are defined by the specified delimiter, quote, and escape characters
+ 按自定义分隔符、引号和退出（escape）字符拆分字段
+
+
+ Custom delimiters
+ 自定义分隔符
+
+
+ Regular expression delimiter
+ 分隔符为正则表达式
+
+
+ Use a spatial index to improve performance of displaying and spatially selecting features
+ 使用空间索引以提高显示及空间上选择要素的性能
+
+
+ Use spatial index
+ 使用空间索引
+
+
+ Use an index to improve performance of subset filters (set in layer properties)
+ 使用索引以提高的子集筛选（在图层属性中设置）的性能
+
+
+ Use subset index
+ 使用子集索引
+
+
+ Watch for changes to the file by other applications while QGIS is running
+ QGIS运行时追踪其他程序对文本文件内容的更改
+
+
+ Watch file
+ 追踪文件
+
+
+ Geometry definition
+ 几何图形定义
+
+
+ Geometry is a point defined by X and Y coordinate fields
+ 由横坐标字段和纵坐标字段定义的点
+
+
+ Point coordinates
+ 点坐标
+
+
+ Geometry is read as a well known text string from the selected fields
+ 几何图形以well known text字符串形式从选中的字段中读入
+
+
+ Well known text (WKT)
+ WKT文本
+
+
+ The file contains only attribute information - it will not be displayed on the map
+ 文件仅包含属性信息，不在地图中显示
+
+
+ No geometry (attribute only table)
+ 无几何图形（属性表）
+
+
+ Trim leading and trailing spaces from fields
+ 若字段前后有多个连续的空格，将被剪裁为单个空格
+
+
+ Trim fields
+ 裁剪字段前后的空格
+
+
+ Discard empty fields in each record
+ 忽略每一条记录中的空字段
+
+
+ Discard empty fields
+ 忽略空字段
+
数字字段使用逗号作为小数点分隔符
- Each line in the file is split using a regular expression to define the end of each field
- 文件每一行按照正则表达式定义的字段结尾拆分成多个字段
+ Decimal separator is comma
+ 小数点为逗号
- The file a comma separated value file, fields delimited by commas and quoted by "
- 文件以逗号分隔字段，必要时字段由双引号（""）引起来
+ Comma character is one of the delimiters
+ 逗号为字段分隔符
Semicolon character is one of the delimiters
分号为字段分隔符
+
+ Semicolon
+ 分号
+
Other delimiters
@@ -26922,241 +22327,6 @@ p, li { white-space: pre-wrap; }
Regular expression used to split each line into fields
用以将每一行拆分成多个字段的正则表达式
-
- File format
- 文件格式
-
-
- Geometry definition
- 几何图形定义
-
-
- Geometry is a point defined by X and Y coordinate fields
- 由横坐标字段和纵坐标字段定义的点
-
-
- Point coordinates
- 点坐标
-
-
- X and Y coordinates are expressed in degrees/minutes/seconds
- 横坐标和纵坐标以度/分/秒格式表达
-
-
- DMS coordinates
- 度分秒格式坐标
-
-
- Geometry is read as a well known text string from the selected fields
- 几何图形以well known text字符串形式从选中的字段中读入
-
-
- Well known text (WKT)
- WKT文本
-
-
- Geometry field
- 几何图形字段
-
-
- Select the file encoding
- 选择文件编码
-
-
- Name of the field containing well known text value
- 包含well known text值的字段名称
-
-
- Geometry type
- 几何图形类型
-
-
- Detect
- 检测
-
-
- Point
- 点
-
-
- Line
- 行
-
-
- Polygon
- 多边形
-
-
- The number of lines to discard from the beginning of the file
- 从文件开头起要忽略的行数
-
-
- Field names are read from the first record. If not selected then fields are numbered
- 从第一行读入字段名称。若不勾选此项，则以数字序号为字段名
-
-
- The file is a comma separated value file, fields delimited by commas and quoted by "
- 该文件中值被逗号分隔，字段由逗号分隔并由"引出
-
-
- CSV (comma separated values)
- CSV格式（值用逗号分隔）
-
-
- Fields are defined by the specified delimiter, quote, and escape characters
- 按自定义分隔符、引号和退出（escape）字符拆分字段
-
-
- Custom delimiters
- 自定义分隔符
-
-
- Each line in the file is split using a regular expression to define the end of each field
- 文件中的每一行都被一个用于定义每个字段结尾的正则表达式分隔
-
-
- Regular expression delimiter
- 分隔符为正则表达式
-
-
- Use a spatial index to improve performance of displaying and spatially selecting features
- 使用空间索引以提高显示及空间上选择要素的性能
-
-
- Use spatial index
- 使用空间索引
-
-
- Use an index to improve performance of subset filters (set in layer properties)
- 使用索引以提高的子集筛选（在图层属性中设置）的性能
-
-
- Use subset index
- 使用子集索引
-
-
- Watch for changes to the file by other applications while QGIS is running
- QGIS运行时追踪其他程序对文本文件内容的更改
-
-
- Watch file
- 追踪文件
-
-
- The file contains only attribute information - it will not be displayed on the map
- 文件仅包含属性信息，不在地图中显示
-
-
- No geometry (attribute only table)
- 无几何图形（属性表）
-
-
- File Name
- 文件名称
-
-
- Full path to the delimited text file
- 分隔文本文件的完整路径
-
-
- Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
- 分隔文本文件的完整路径。为了能正确地解析文件中的字段，分隔符必须在输入文件名称之前定义。使用右边的浏览按钮来选择输入文件.
-
-
- Layer name
- 图层名称
-
-
- Name to display in the map legend
- 显示在地图图例中的名称
-
-
- Name displayed in the map legend
- 显示在地图图例中的名称
-
-
- Encoding
- 编码
-
-
- Decimal separator is comma
- 小数点为逗号
-
-
- Comma character is one of the delimiters
- 逗号为字段分隔符
-
Layer settings
@@ -27167,126 +22337,11 @@ p, li { white-space: pre-wrap; }
Sample data
数据样例
-
- Record options
- 记录选项
-
-
- Number of header lines to discard
- 从文件开头起忽略的行数
-
-
- First record has field names
- 首行包含字段名称
-
-
- Field options
- 字段选项
-
-
- Trim leading and trailing spaces from fields
- 若字段前后有多个连续的空格，将被剪裁为单个空格
-
-
- Trim fields
- 裁剪字段前后的空格
-
-
- Discard empty fields in each record
- 忽略每一条记录中的空字段
-
-
- Discard empty fields
- 忽略空字段
-
-
- Browse to find the delimited text file to be processed
- 浏览以寻找将要处理的分隔文本文件
-
-
- Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
- 使用这个按钮来浏览分隔文本文件的位置。这个按钮只有在<i>分隔符</i>框中输入了分隔符后才可用。一旦选择了一个文件，横坐标和纵坐标字段的下拉列表会用文本文件中的字段来填充。
-
-
- Browse...
- 浏览...
-
-
- Selected delimiters
- 选择文本分隔符
-
-
- The delimiter is a regular expression
- 分隔符为正则表达式
-
-
- Regular expression
- 以正则表达式作为分隔符
-
-
- Plain characters
- 普通字符作为分隔符
-
-
- Tab
- 制表符
-
-
- Space
- 空格
-
-
- Comma
- 逗号
-
-
- Semicolon
- 分号
-
Colon
冒号
-
- Delimiter to use when splitting fields in the text file. The delimiter can be more than one character.
- 在文本文件中用以分隔字段的分隔符。分隔符可以是多个字符。
-
-
- Delimiter to use when splitting fields in the delimited text file. The delimiter can be 1 or more characters in length.
- 在文本文件中用以分隔字段的分隔符。分隔符可以是一个或多个字符。
-
-
- Start import at row
- 数据起始行
-
-
- The file contains X and Y coordinate columns
- 包含横坐标列和纵坐标列的文件
-
-
- X Y fields
- 横坐标和纵坐标字段
-
<p align="right">X field</p>
@@ -27299,10 +22354,6 @@ p, li { white-space: pre-wrap; }
Name of the field containing x values
包含横坐标值的字段名称
-
- Name of the field containing x values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- 包含横坐标值的字段名称。从列表中选择一个字段。该列表通过解析文本文件的首行而生成。
-
<p align="right">Y field</p>
@@ -27315,26 +22366,6 @@ p, li { white-space: pre-wrap; }
Name of the field containing y values
包含纵坐标值的字段名称
-
- Name of the field containing y values. Choose a field from the list. The list is generated by parsing the header row of the delimited text file.
- 包含纵坐标值的字段名称。从列表中选择一个字段。该列表通过解析文本文件的首行而生成。
-
-
- The file contains a well known text geometry field
- 包含一个Well Known Text几何字段的文件
-
-
- WKT field
- WKT字段
-
-
- Decimal point
- 小数点
-
-
- Sample text
- 样例文本
-
QgsDetailedItemWidgetBase
@@ -27359,44 +22390,6 @@ p, li { white-space: pre-wrap; }
分类标签
-
- QgsDiagramDialog
-
- Pie chart
- 饼图
-
-
- Bar chart
- 柱状图
-
-
- Proportional SVG symbols
- 依比例的SVG符号
-
-
-
- QgsDiagramDialogBase
-
- Dialog
- 对话框
-
-
- Display diagrams
- 显示图表
-
-
- Diagram type
- 图表类型
-
-
- Classification attribute
- 类别属性
-
-
- Classification type
- 类别类型
-
-
QgsDiagramProperties
@@ -27561,7 +22554,7 @@ p, li { white-space: pre-wrap; }
Expression based attribute
-
Pen color
画笔颜色
-
- No attributes added.
- 未添加属性。
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
尚未在该图表图层上添加任何属性。请指定属性以使之具体化或禁用该图表。
-
- No attribute value specified
- 未指定属性值
-
QgsDiagramPropertiesBase
@@ -27709,7 +22694,7 @@ p, li { white-space: pre-wrap; }
Edit expression
- 编辑表达式
+
此处输入的值将与“尺寸”字段及选中的“尺寸单位”字段对应。
留空将自动应用最大值。
-
- Empty: Use maximum value
- 空：使用最大值
-
Scale
@@ -27835,7 +22816,7 @@ Leave empty to automatically apply the maximum value.
Add expression
-
Angle
角度
-
- Ellipsoidal
- 椭球
-
-
-
- QgsDlgPgBufferBase
-
- Buffer features
- 对要素作缓冲区
-
-
- Buffer distance in map units:
- 缓冲区距离(地图单位):
-
-
- Table name for the buffered layer:
- 缓冲区图层的表名:
-
-
- Create unique object id
- 创建唯一的对象标识符
-
-
- public
- 公有
-
-
- Geometry column:
- 几何字段:
-
-
- Spatial reference ID:
- 空间参考标识符：
-
-
- Unique field to use as feature id:
- 用作要素标识符的唯一值字段:
-
-
- Schema:
- 模式：
-
-
- Add the buffered layer to the map?
- 是否将缓冲区图层添加到地图上?
-
-
- <h2>Buffer the features in layer: </h2>
- <h2>对该图层的要素作缓冲区: </h2>
-
-
- Parameters
- 参数
-
QgsDualView
-
- Attributes changed
- 更改属性
-
Expression based preview
@@ -28012,21 +22934,17 @@ Leave empty to automatically apply the maximum value.
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
无法将字段“%1”设置为预览字段。
解析错误：
%2
-
- Run action
- 执行动作
-
Run layer action
-
Form
- 窗体
+
Dummy Text
-
@@ -28091,12 +23009,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -28104,57 +23022,57 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
- 另存为
+
...
- ...
+
No symbology
- 无符号
+
Feature symbology
- 要素符号
+
Symbol layer symbology
- 符号图层符号
+
Select all
- 全选
+
Unselect all
- 清除选择
+
Export features intersecting the current map extent
-
@@ -28163,12 +23081,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -28216,46 +23134,12 @@ Parser error:
Horizontal anchor point
-
Vertical anchor point
-
-
-
- QgsEmbedLayerDialog
-
- Select project file
- 选择项目文件
-
-
- QGis files
- QGIS文件
-
-
- Recursive embeding not possible
- 不可以递归嵌入
-
-
- It is not possible to embed layers / groups from the current project
- 不可以由当前项目嵌入图层或组
-
-
-
- QgsEmbedLayerDialogBase
-
- Select layers and groups to embed
- 选择要嵌入的图层和组
-
-
- Project file
- 项目文件
-
-
- ...
- ...
+
@@ -28273,10 +23157,6 @@ Parser error:
QgsEngineConfigDialog
-
- Dialog
- 对话框
-
Search method
@@ -28328,19 +23208,14 @@ Parser error:
多边形
- Show all labels and features for all layers
- 在全部图层中显示所有标签和要素
+ (i.e. including colliding objects)
+ （例如包括重叠的对象）
Draw text as outlines (recommended)
-
-
- Show candidates (for debugging)
- 显示候选（用于调试）
+
Show partials labels
-
- Save settings with project
- 随项目保存设置
+ Show all labels and features for all layers
+ 在全部图层中显示所有标签和要素
Automated Placement Engine
-
- (i.e. including colliding objects)
- （例如包括重叠的对象）
+ Show candidates (for debugging)
+ 显示候选（用于调试）
@@ -28387,7 +23263,7 @@ Parser error:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28400,7 +23276,7 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -28429,10 +23305,6 @@ p, li { white-space: pre-wrap; }
QgsExpressionBuilderWidget
-
- Operators
- 操作符
-
(String Concatenation)
@@ -28453,19 +23325,11 @@ p, li { white-space: pre-wrap; }
'Dia' || Diameter
'Dia' || 直径
-
- Fields
- 字段
-
Search
搜索
-
- Fields and Values
- 字段和值
-
Addition operator
@@ -28529,7 +23393,7 @@ p, li { white-space: pre-wrap; }
Recent (%1)
-
Load all unique values
载入全部唯一值
-
- <h3>Oops! QGIS can't find help for this function.</h3>The help file for %1 was not found.<br>
- <h3>糟糕！QGIS找不到该函数的帮助。</h3>未找到%1的帮助文件。<br>
-
-
- (Showing English version as there was no help available in your language (%1). If you would like to create it, contact the QGIS translation team).<br>
- （因为找不到你所使用的语言版本（%1）的帮助文件，因此显示英文版。如果你想创建你使用的语言版本的帮助文件，请联系QGIS翻译团队）<br>
-
-
- It was neither available in your language (%1) nor English.
- 不可用，无论是你使用的语言（%1），还是英语。
-
-
- <br>If you would like to create it, contact the QGIS development team.
- <br>如果你想创建它，请跟QGIS开发团队联系。
-
QgsExpressionBuilderWidgetBase
@@ -28585,59 +23433,35 @@ p, li { white-space: pre-wrap; }
Form
窗体
-
- Function List
- 函数列表
-
-
- Search
- 搜索
-
-
- Selected Function Help
- 所选函数的帮助信息
-
-
- Field Values
- 字段值
-
-
- Load all unique values
- 载入全部唯一值
-
-
- Load 10 sample values
- 载入前10个样例值
-
Function list
-
Selected function help
-
Field values
-
Load values
-
all unique
-
10 samples
-
layer
- 图层
+
map view
- 地图视图
+
user defined
- 用户定义的
+
Extent (current: %1)
- 范围（当前：%1）
+
@@ -28817,37 +23641,37 @@ p, li { white-space: pre-wrap; }
Form
- 窗体
+
West
- 西
+
East
- 东
+
North
- 北
+
South
- 南
+
Layer extent
- 图层范围
+
Map view extent
- 地图视图范围
+
@@ -28863,7 +23687,7 @@ p, li { white-space: pre-wrap; }
Dialog
- 对话框
+
@@ -28877,7 +23701,7 @@ p, li { white-space: pre-wrap; }
Only update %1 selected features
-
表达式无效，详情请参阅（更多信息）
-
- (not supported by provider)
- （不受数据源支持）
-
QgsFieldCalculatorBase
@@ -28931,62 +23751,15 @@ p, li { white-space: pre-wrap; }
Field calculator
字段计算器
-
- Create a new field
- 新建字段
-
-
- Update existing field
- 更新现有的字段
-
Only update selected features
仅更新选中的要素
- Fields
- 字段
-
-
- Values
- 值
-
-
- Sample
- 采样
-
-
- All
- 所有
-
-
- Operators
- 操作符
-
-
- Width of complete output. For example 123,456 means 6 as field width.
- 完整输出的宽度。例如123,456意味着字段宽度为6。
-
-
- Precision
- 精度
-
-
- +
- +
-
-
- -
- -
-
-
- /
- /
+ Create a new field
+ 新建字段
Output field width
输出字段宽度
+
+ Width of complete output. For example 123,456 means 6 as field width.
+ 完整输出的宽度。例如123,456意味着字段宽度为6。
+
+
+ Precision
+ 精度
+
+
+ Update existing field
+ 更新现有的字段
+
QgsFieldExpressionWidget
Expression dialog
-
@@ -29069,12 +23857,12 @@ p, li { white-space: pre-wrap; }
Layer
- 图层
+
Field
- 字段
+
Editor Widget
-
Fields
- 字段
+
Relations
- 关系
+
Suppress attribute form pop-up after feature creation
-
Default
- 默认
+
On
-
Off
- 关闭
+
...
- ...
+
Select a file
- 选择一个文件
+
@@ -29389,13 +24177,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
- 毫米
+
Map unit
- 地图单位
+
@@ -29413,10 +24201,6 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
QgsFormAnnotationDialogBase
-
- Dialog
- 对话框
-
Form annotation
@@ -29494,51 +24278,6 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
GPS Device Editor
GPS设备编辑器
-
- This is the name of the device as it will appear in the lists
- 这是设备的名称，它会出现在列表中
-
-
- Commands
- 命令
-
-
- The command that is used to upload tracks to the device
- 该命令用来将轨迹上载到设备上
-
-
- The command that is used to download tracks from the device
- 该命令用来将轨迹从设备上下载下来
-
-
- The command that is used to upload routes to the device
- 该命令用来将路径上载到设备上
-
-
- The command that is used to download routes from the device
- 该命令用来将路径从设备上下载下来
-
-
- The command that is used to upload waypoints to the device
- 该命令用来将航点上载到设备上
-
-
- The command that is used to download waypoints from the device
- 该命令用来将航点从设备上下载下来
-
-
- Device name
- 设备名称
-
Devices
@@ -29559,6 +24298,21 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Update
更新
+
+ Device name
+ 设备名称
+
+
+ This is the name of the device as it will appear in the lists
+ 这是设备的名称，它会出现在列表中
+
+
+ Commands
+ 命令
+
Track download
@@ -29574,16 +24328,46 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Waypoint download
航点下载
+
+ The command that is used to download routes from the device
+ 该命令用来将路径从设备上下载下来
+
Route download
路径下载
+
+ The command that is used to upload waypoints to the device
+ 该命令用来将航点上载到设备上
+
Track upload
轨迹上传
+
+ The command that is used to download tracks from the device
+ 该命令用来将轨迹从设备上下载下来
+
+
+ The command that is used to upload routes to the device
+ 该命令用来将路径上载到设备上
+
+
+ The command that is used to download waypoints from the device
+ 该命令用来将航点从设备上下载下来
+
+
+ The command that is used to upload tracks to the device
+ 该命令用来将轨迹上载到设备上
+
Waypoint upload
@@ -29594,7 +24378,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -29605,25 +24389,6 @@ p, li { white-space: pre-wrap; }
QgsGPSInformationWidget
-
- Connecting...
- 正在连接...
-
-
- Timed out!
- 超时！
-
-
- Connected!
- 已连接！
-
-
- Connect
- 连接
-
/gps
@@ -29634,16 +24399,31 @@ p, li { white-space: pre-wrap; }
No path to the GPS port is specified. Please enter a path then try again.
没有指定GPS端口的路径。请输入一个路径，然后再试一次。
+
+ Connecting...
+ 正在连接...
+
Connecting to GPS device...
正在连接到GPS设备...
+
+ Timed out!
+ 超时！
+
Failed to connect to GPS device.
连接到GPS设备失败。
+
+ Connected!
+ 已连接！
+
Dis&connect
@@ -29734,23 +24514,6 @@ p, li { white-space: pre-wrap; }
Invalid
无效
-
- NMEA files
- NMEA文件
-
-
- Layer cannot be added to
- 不能添加图层
-
-
- The data provider for this layer does not support the addition of features.
- 该图层的数据源不支持添加要素。
-
-
- Layer not editable
- 图层不可编辑
-
Save GPS log file as
GPS日志文件另存为
+
+ NMEA files
+ NMEA文件
+
&Add feature
@@ -29836,71 +24604,6 @@ Errors: %2
QgsGPSInformationWidgetBase
-
- ...
- ...
-
-
- Connect
- 连接
-
-
- Add vertex
- 添加顶点
-
-
- Autodetect
- 自动检测
-
-
- Port
- 端口
-
-
- Host
- 主机
-
-
- Device
- 设备
-
-
- Small
- 小
-
-
- Large
- 大
-
-
- never
- 从不
-
-
- always
- 总是
-
-
- Track
- 轨迹
-
GPS Connect
@@ -29938,6 +24641,18 @@ gray = no data
Reset track
重置轨迹
+
+ ...
+ ...
+
Position
@@ -30123,6 +24838,11 @@ gray = no data
Connection
连接
+
+ Autodetect
+ 自动检测
+
Serial device
@@ -30133,6 +24853,21 @@ gray = no data
Refresh serial device list
刷新串口设备列表
+
+ Port
+ 端口
+
+
+ Host
+ 主机
+
+
+ Device
+ 设备
+
00000;
@@ -30153,6 +24888,11 @@ gray = no data
Digitizing
数字化
+
+ Track
+ 轨迹
+
Automatically add points
@@ -30163,6 +24903,11 @@ gray = no data
Track width in pixels
轨迹的像素宽度
+
+ width
+ 宽度
+
Color
@@ -30208,26 +24953,38 @@ gray = no data
% of map extent
%地图范围
+
+ never
+ 从不
+
+
+ always
+ 总是
+
Cursor
光标
- width
- 宽度
+ Small
+ 小
+
+
+ Large
+ 大
QgsGPSPlugin
- &Gps
- GPS (&G)
-
-
- &Gps Tools
- GPS工具 (&G)
+ &GPS Tools
+ GPS工具 (&G)
新的GPX文件另存为...
- GPS eXchange file (*.gpx)
- GPS交换文件 (*.gpx)
+ GPS eXchange file
+ GPS交换文件
GPX Loader
GPX载入器
+
+ Unable to read the selected file.
+Please reselect a valid file.
+ 无法读取选中的文件。
+请重新选择一个有效的文件。
+
Error importing data
导入数据时出错
+
+ Could not convert data from %1!
+
+
+ 无法从%1转换数据!
+
+
+
+
+ Error converting data
+ 转换数据时出错
+
Not supported
不支持
+
+ This device does not support downloading of %1.
+ 该设备不支持%1下载。
+
Downloading data...
@@ -30339,6 +25123,11 @@ gray = no data
Error downloading data
下载数据时出错
+
+ This device does not support uploading of %1.
+ 该设备不支持%1上传。
+
Uploading data...
@@ -30358,66 +25147,9 @@ gray = no data
Error uploading data
上传数据时出错
-
- Could not convert data from %1!
-
-
- 无法从%1转换数据!
-
-
-
-
- Error converting data
- 转换数据时出错
-
-
- Unable to read the selected file.
-Please reselect a valid file.
- 无法读取选中的文件。
-请重新选择一个有效的文件。
-
-
- &GPS Tools
- GPS工具 (&G)
-
-
- GPS eXchange file
- GPS交换文件
-
-
- This device does not support downloading of %1.
- 该设备不支持%1下载。
-
-
- This device does not support uploading of %1.
- 该设备不支持%1上传。
-
QgsGPSPluginGui
-
- GPS eXchange format (*.gpx)
- GPS交换文件(*.gpx)
-
-
- Select GPX file
- 选择GPX文件
-
-
- Select file and format to import
- 选择要导入的文件和格式
-
GPS eXchange format
GPS交换文件
+
+ Select GPX file
+ 选择GPX文件
+
+
+ Select file and format to import
+ 选择要导入的文件和格式
+
Waypoints from a route
@@ -30471,6 +25214,11 @@ Please reselect a valid file.
Track from waypoints
航点到轨迹
+
+ GPS eXchange format (*.gpx)
+ GPS交换文件(*.gpx)
+
QgsGPSPluginGuiBase
@@ -30484,6 +25232,23 @@ Please reselect a valid file.
Load GPX file
载入GPX文件
+
+ File
+ 文件
+
+
+ Browse...
+ 浏览...
+
+
+ Feature types
+ 要素类型
+
Import other file
导入其它的文件
-
- Download from GPS
- 从GPS下载
-
-
- Edit devices
- 编辑设备
-
-
- Upload to GPS
- 上载到GPS
-
-
- Browse...
- 浏览...
-
-
- Save As...
- 另存为...
-
-
- (Note: Selecting correct file type in browser dialog important!)
- （注意：在浏览对话框中选择正确的文件类型非常重要！）
-
-
- GPX Conversions
- GPX转换
-
-
- Edit devices...
- 编辑设备...
-
-
- Refresh
- 刷新
-
-
- File
- 文件
-
-
- Feature types
- 要素类型
-
File to import
@@ -30590,28 +25296,70 @@ Please reselect a valid file.
GPX output file
GPX输出文件
+
+ Save As...
+ 另存为...
+
+
+ (Note: Selecting correct file type in browser dialog important!)
+ （注意：在浏览对话框中选择正确的文件类型非常重要！）
+
+
+ Download from GPS
+ 从GPS下载
+
GPS device
GPS设备
+
+ Edit devices...
+ 编辑设备...
+
Port
端口
+
+ Refresh
+ 刷新
+
Output file
输出文件
+
+ Upload to GPS
+ 上载到GPS
+
Data layer
数据图层
+
+ Edit devices
+ 编辑设备
+
+
+ GPX Conversions
+ GPX转换
+
GPX input file
@@ -30653,23 +25401,11 @@ Please reselect a valid file.
Band %1
波段%1
-
- Dimensions:
- 维度：
-
X: %1 Y: %2 Bands: %3
横坐标：%1 纵坐标：%2 波段：%3
-
- Origin:
- 起点：
-
-
- Pixel Size:
- 像素大小：
-
Dimensions
@@ -30688,7 +25424,7 @@ Please reselect a valid file.
Band
- 波段
+
Cannot get GDAL raster band: %1
无法获取GDAL栅格波段：%1
-
- Cubic
- 立方卷积
-
-
- Mode
- 模式
-
-
- out of extent
- 超出范围
-
-
- null (no data)
- 空值（无数据）
-
-
- Average
- 平均值
-
QgsGenericProjectionSelector
+
+ Define this layer's coordinate reference system:
+ 定义该图层的坐标参照系：
+
This layer appears to have no projection specification.
@@ -30738,11 +25459,6 @@ Please reselect a valid file.
By default, this layer will now have its projection set to that of the project, but you may override this by selecting a different projection below.
默认情况下，该图层的投影会被设置为跟项目的投影一致，但你也可以选择以下不同的投影。
-
- Define this layer's coordinate reference system:
- 定义该图层的坐标参照系：
-
QgsGenericProjectionSelectorBase
@@ -30915,6 +25631,21 @@ Please reselect a valid file.
Show coords
显示坐标
+
+ Residual units
+ 残差单位
+
+
+ Pixels
+ 像素
+
+
+ Use map units if possible
+ 可能时使用地图单位
+
PDF report
@@ -30951,21 +25682,6 @@ Please reselect a valid file.
Paper size
纸张大小
-
- Residual units
- 残差单位
-
-
- Pixels
- 像素
-
-
- Use map units if possible
- 可能时使用地图单位
-
QgsGeorefDescriptionDialogBase
@@ -30979,7 +25695,7 @@ Please reselect a valid file.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -31000,6 +25716,11 @@ p, li { white-space: pre-wrap; }
QgsGeorefPluginGui
+
+ Georeferencer
+ 配准
+
All other files (*)
@@ -31062,6 +25783,12 @@ p, li { white-space: pre-wrap; }
Load GCP points
载入地面控制点
+
+ GCP file
+ 地面控制点文件
+
No GCP points to save
@@ -31094,6 +25821,11 @@ p, li { white-space: pre-wrap; }
Toolbars
工具栏
+
+ Current transform parametrisation
+ 当前转换的参数化过程
+
Coordinate:
@@ -31105,30 +25837,25 @@ p, li { white-space: pre-wrap; }
当前地图的坐标
- Current transform parametrisation
- 当前转换的参数化过程
+ None
+ 无
+
+
+ Coordinate of image(column/line)
+ 影像的坐标（列/行）
Unable to open GCP points file %1
无法打开地面控制点文件%1
-
- Could not write to %1
- 无法写入%1
-
Save GCPs
保存地面控制点
-
- Georeferencer
- 配准
-
Save GCP points?
@@ -31160,6 +25887,25 @@ p, li { white-space: pre-wrap; }
Error
错误
+
+ Could not write to %1
+ 无法写入%1
+
+
+ map units
+ 地图单位
+
+
+ pixels
+ 像素
+
Transformation parameters
@@ -31190,46 +25936,16 @@ p, li { white-space: pre-wrap; }
Rotation [degrees]
旋转角度
-
- Residuals
- 残差
-
-
- map units
- 地图单位
-
-
- GCP file
- 地面控制点文件
-
-
- None
- 无
-
-
- Coordinate of image(column/line)
- 影像的坐标（列/行）
-
-
- pixels
- 像素
-
Mean error [%1]
平均误差：[%1]
+
+ Residuals
+ 残差
+
yes
@@ -31491,14 +26207,6 @@ p, li { white-space: pre-wrap; }
Link QGIS to Georeferencer
将QGIS连接到配准工具
-
- Link Georeferencer to QGis
- 将配准工具连接到QGIS
-
-
- Link QGis to Georeferencer
- 将QGIS连接到配准工具
-
Map
- 地图
+
Base Layer
-
URL
-
TextLabel
- 文本标签
+
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Cannot guess schema
-
QgsGradientFillSymbolLayerV2Widget
-
- Color
- 颜色
-
-
- Color 2
- 颜色二
-
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Color (start)
-
Color (end)
-
Angle
- 角度
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
-
-
- QgsGraduatedSymbolDialog
-
- Equal Interval
- 等间距
-
-
-
- QgsGraduatedSymbolDialogBase
-
- graduated Symbol
- 渐进符号
-
-
- Delete class
- 删除类别
-
-
- Classify
- 分类
-
-
- Classification field
- 类别字段
-
-
- Mode
- 模式
-
-
- Number of classes
- 类别数目
+
QgsGraduatedSymbolRendererV2Model
- Symbol
符号
- Value
值
- Label
标签
QgsGraduatedSymbolRendererV2Widget
-
- Range
- 范围
-
-
- Label
- 标签
-
-
- Symbol levels...
- 符号层次...
-
-
- Error
- 错误
-
-
- There are no available color ramps. You can add them in Style Manager.
- 没有可用的颜色渐变。你可以在样式管理器中添加。
-
-
- The selected color ramp is not available.
- 选中的颜色渐变不可用。
-
-
- Warning
- 警告
-
-
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
-Press cancel to abort breaks calculation or OK to continue.
-
-
- Renderer creation has failed.
- 创建渲染器失败。
-
-
- change
- 更改
-
Column
@@ -32090,21 +26706,6 @@ Press cancel to abort breaks calculation or OK to continue.
Quantile (Equal Count)
分位数（等计数）
-
- Invert
- 反转
-
-
- Delete
- 删除
-
-
- Delete all
- 全部删除
-
Natural Breaks (Jenks)
@@ -32120,6 +26721,11 @@ Press cancel to abort breaks calculation or OK to continue.
Pretty Breaks
Pretty Breaks
+
+ Invert
+
Classify
@@ -32131,22 +26737,61 @@ Press cancel to abort breaks calculation or OK to continue.
添加类别
- Delete class
- 删除类别
+ Delete
+ 删除
+
+
+ Delete all
+ 全部删除
Advanced
高级
+
+ Symbol levels...
+ 符号层次...
+
+
+ Error
+ 错误
+
+
+ There are no available color ramps. You can add them in Style Manager.
+ 没有可用的颜色渐变。你可以在样式管理器中添加。
+
+
+ The selected color ramp is not available.
+ 选中的颜色渐变不可用。
+
+
+ Warning
+
+
+ Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
+Press cancel to abort breaks calculation or OK to continue.
+
+
+ Renderer creation has failed.
+ 创建渲染器失败。
+
QgsGrassAttributes
-
- Warning
- 警告
-
Column
@@ -32162,6 +26807,16 @@ Press cancel to abort breaks calculation or OK to continue.
Type
类型
+
+ Layer
+ 图层
+
+
+ Warning
+ 警告
+
ERROR
@@ -32172,11 +26827,6 @@ Press cancel to abort breaks calculation or OK to continue.
OK
确定
-
- Layer
- 图层
-
QgsGrassAttributesBase
@@ -32195,20 +26845,15 @@ Press cancel to abort breaks calculation or OK to continue.
result
结果
-
- Update
- 更新
-
Update database record
更新数据库记录
- New
- 新建
+ Update
+ 更新
使用GRASS编辑工具箱中的设置来添加新的类别
- Delete
- 删除
+ New
+ 新建
Delete selected category
删除选中的类别
+
+ Delete
+ 删除
+
QgsGrassBrowser
@@ -32263,6 +26913,18 @@ Press cancel to abort breaks calculation or OK to continue.
Refresh
刷新
+
+ New name
+ 新名称
+
+
+ New name for layer "%1"
+ 图层“%1”的新名称
+
Warning
警告
-
- Information
- 信息
-
-
- Remove the selected layer(s) from QGis canvas before continue.
- 在继续下一步之前请从QGIS视图中删除选中的图层。
-
-
- Cannot write new region
- 无法写入新区域
-
-
- New name
- 新名称
-
Cannot copy map %1@%2
@@ -32308,22 +26950,16 @@ Press cancel to abort breaks calculation or OK to continue.
Cannot rename map %1
无法重命名地图%1
+
+ Information
+ 信息
+
Remove the selected layer(s) from canvas before continue.
在继续下一步之前请从视图中删除选中的图层。
-
- Cannot delete map %1
- 无法删除地图%1
-
-
- New name for layer "%1"
- 图层“%1”的新名称
-
Question
@@ -32333,78 +26969,21 @@ Press cancel to abort breaks calculation or OK to continue.
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- 确定要删除%n个选中的图层？
-
+ 确定要删除%n个选中的图层？
+
+ Cannot delete map %1
+ 无法删除地图%1
+
+
+ Cannot write new region
+ 无法写入新区域
QgsGrassEdit
-
- New point
- 新的点
-
-
- New centroid
- 新的质心
-
-
- Delete vertex
- 删除顶点
-
-
- Edit tools
- 编辑工具
-
-
- New line
- 新的线
-
-
- New boundary
- 新的边界
-
-
- Move vertex
- 移动顶点
-
-
- Add vertex
- 添加顶点
-
-
- Move element
- 移动元素
-
-
- Split line
- 分割线条
-
-
- Delete element
- 删除元素
-
-
- Edit attributes
- 编辑属性
-
-
- Close
- 关闭
-
无法打开并更新矢量。
- Info
- 信息
+ Edit tools
+ 编辑工具
- The table was created
- 表格已经创建
+ New point
+ 新的点
- Tool not yet implemented.
- 工具尚未实现。
+ New line
+ 新的线
- Orphan record was left in attribute table. <br>Delete the record?
- 属性表中留有孤立记录。<br>删除之？
+ New boundary
+ 新的边界
- Cannot delete orphan record:
- 无法删除孤立记录：
+ New centroid
+ 新的质心
+
+
+ Move vertex
+ 移动顶点
+
+
+ Add vertex
+ 添加顶点
+
+
+ Delete vertex
+ 删除顶点
+
+
+ Move element
+ 移动元素
+
+
+ Split line
+ 分割线条
+
+
+ Delete element
+ 删除元素
+
+
+ Edit attributes
+ 编辑属性
+
+
+ Close
+ 关闭
No category
无类别
+
+ Info
+ 信息
+
+
+ The table was created
+ 表格已经创建
+
+
+ Tool not yet implemented.
+ 工具尚未实现。
+
Cannot check orphan record: %1
无法检查孤立记录：%1
+
+ Orphan record was left in attribute table. <br>Delete the record?
+ 属性表中留有孤立记录。<br>删除之？
+
+
+ Cannot delete orphan record:
+ 无法删除孤立记录：
+
Cannot describe table for field %1
@@ -32608,6 +27252,12 @@ Press cancel to abort breaks calculation or OK to continue.
Mode
模式
+
+ Layer
+ 图层
+
Settings
@@ -32623,21 +27273,6 @@ Press cancel to abort breaks calculation or OK to continue.
Symbology
符号化
-
- Table
- 表
-
-
- Add Column
- 添加字段
-
-
- Create / Alter Table
- 创建/更改表
-
Line width
@@ -32648,12 +27283,6 @@ Press cancel to abort breaks calculation or OK to continue.
Marker size
标记的大小
-
- Layer
- 图层
-
Disp
@@ -32675,6 +27304,11 @@ Press cancel to abort breaks calculation or OK to continue.
Index
索引
+
+ Table
+ 表
+
Column
@@ -32685,6 +27319,16 @@ Press cancel to abort breaks calculation or OK to continue.
Length
长度
+
+ Add Column
+ 添加字段
+
+
+ Create / Alter Table
+ 创建/更改表
+
QgsGrassEditDeleteLine
@@ -32780,14 +27424,6 @@ Press cancel to abort breaks calculation or OK to continue.
Undo last vertex
撤消最后的顶点
-
- New point
- 新的点
-
-
- Undo last point
- 撤消最后的点
-
Close line
@@ -33159,6 +27795,12 @@ Press cancel to abort breaks calculation or OK to continue.
Current y-coordinate of moving window
移动窗口的当前y坐标
+
+ Output
+ 输出
+
Cannot get current region
无法获取当前区域
+
+ Cannot check region of map %1
+ 无法检查地图%1的区域
+
+
+ Cannot get region of map %1
+ 无法获取地图%1的区域
+
No GRASS raster maps currently in QGIS
@@ -33205,6 +27857,11 @@ Press cancel to abort breaks calculation or OK to continue.
Enter vector name
输入矢量名称
+
+ The file already exists. Overwrite?
+ 文件已经存在。要覆盖吗？
+
Cannot open mapcalc file
无法打开mapcalc文件
-
- Output
- 输出
-
-
- Cannot check region of map %1
- 无法检查地图%1的区域
-
-
- Cannot get region of map %1
- 无法获取地图%1的区域
-
-
- The file already exists. Overwrite?
- 文件已经存在。要覆盖吗？
-
The mapcalc schema (%1) not found.
@@ -33283,15 +27919,9 @@ at line %2 column %3
QgsGrassModule
- Run
- 运行
-
-
- Stop
- 停止
+ Module: %1
+ 模块：%1
Warning
警告
-
- Cannot get input region
- 无法获取输入区域
-
-
- Use Input Region
- 使用输入区域
-
-
- <B>Successfully finished</B>
- <B>已经成功完成</B>
-
-
- <B>Finished with error</B>
- <B>已经完成，但有错误</B>
-
-
- <B>Module crashed or killed</B>
- <B>模块已崩溃或被杀死</B>
-
-
- Please ensure you have the GRASS documentation installed.
- 请确认你已经安装了GRASS文档。
-
-
- Module: %1
- 模块：%1
-
The module file (%1) not found.
@@ -33380,6 +27974,11 @@ at line %2 column %3
Cannot find man page %1
找不到帮助页面%1
+
+ Please ensure you have the GRASS documentation installed.
+ 请确认你已经安装了GRASS文档。
+
Not available, description not found (%1)
@@ -33395,11 +27994,28 @@ at line %2 column %3
Not available, incorrect description (%1)
不可用，描述不正确（%1）
+
+ Run
+ 运行
+
+
+ Cannot get input region
+ 无法获取输入区域
+
Input %1 outside current region!
输入%1超出当前区域！
+
+ Use Input Region
+ 使用输入区域
+
Output %1 exists! Overwrite?
@@ -33415,6 +28031,26 @@ at line %2 column %3
Cannot start module: %1
无法启动模块：%1
+
+ Stop
+ 停止
+
+
+ <B>Successfully finished</B>
+ <B>已经成功完成</B>
+
+
+ <B>Finished with error</B>
+ <B>已经完成，但有错误</B>
+
+
+ <B>Module crashed or killed</B>
+ <B>模块已崩溃或被杀死</B>
+
QgsGrassModuleBase
@@ -33438,25 +28074,25 @@ at line %2 column %3
Manual
手动
+
+ TextLabel
+ 文本标签
+
Run
运行
-
- Close
- 关闭
-
View output
查看输出
- TextLabel
- 文本标签
+ Close
+ 关闭
@@ -33497,6 +28133,11 @@ at line %2 column %3
QgsGrassModuleGdalInput
+
+ OGR/PostGIS/GDAL Input
+ OGR/PostGIS/GDAL输入
+
Warning
警告
-
- PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
- OGR中的PostGIS驱动不支模式！<br>仅表格名称会被使用。<br>如果数据库中存在多个相同名称的表格，可能会导致输入错误。
-
Cannot find layeroption %1
找不到图层选项（layeroption）%1
-
- OGR/PostGIS/GDAL Input
- OGR/PostGIS/GDAL输入
-
Cannot find whereoption %1
@@ -33529,19 +28160,29 @@ at line %2 column %3
Password
密码
-
- %1: no input
- %1： 无输入
-
Select a layer
选择一个图层
+
+ PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
+ OGR中的PostGIS驱动不支模式！<br>仅表格名称会被使用。<br>如果数据库中存在多个相同名称的表格，可能会导致输入错误。
+
+
+ %1: no input
+ %1： 无输入
+
QgsGrassModuleInput
+
+ Input
+ 输入
+
Warning
警告
-
- Use region of this map
- 使用该地图区域
-
Cannot find typeoption %1
@@ -33577,6 +28213,16 @@ at line %2 column %3
GRASS element %1 not supported
不支持GRASS元素%1
+
+ Use region of this map
+ 使用该地图区域
+
+
+ Select a layer
+ 选择一个图层
+
%1 (band %2)
@@ -33593,16 +28239,6 @@ at line %2 column %3
%1: no input
%1： 无输入
-
- Input
- 输入
-
-
- Select a layer
- 选择一个图层
-
QgsGrassModuleOption
@@ -33653,21 +28289,6 @@ at line %2 column %3
QgsGrassModuleStandardOptions
-
- Item with key %1 not found
- 未找到键为%1的条目
-
-
- << Hide advanced options
- << 隐藏高级选项
-
-
- Show advanced options >>
- 显示高级选项 >>
-
Warning
警告
-
- Cannot get current region
- 无法获取当前区域
-
Cannot find module %1
@@ -33744,11 +28359,32 @@ at line %2 column %3
Cannot find key %1
找不到键%1
+
+ << Hide advanced options
+ << 隐藏高级选项
+
+
+ Show advanced options >>
+ 显示高级选项 >>
+
+
+ Item with key %1 not found
+ 未找到键为%1的条目
+
Item with id %1 not found
未找到标识符为%1的条目
+
+ Cannot get current region
+ 无法获取当前区域
+
Cannot check region of map %1
@@ -33795,9 +28431,15 @@ at line %2 column %3
数据库
- Location 2
- 地点 2
+ Location 1
+ 地点 1
+
+
+ System mapset
+ 系统地图集
用户地图集
- System mapset
- 系统地图集
-
-
- Location 1
- 地点 1
+ Location 2
+ 地点 2
The directory doesn't exist!
目录不存在！
+
+ No writable locations, the database is not writable!
+ 地点目录或文件不能写入，数据库不可写！
+
Enter location name!
@@ -33877,6 +28518,38 @@ at line %2 column %3
East must be greater than west
东部经度值必须大于西部经度值
+
+ Regions file (%1) not found.
+ 找不到区域文件（%1）。
+
+
+ Cannot open locations file (%1)
+ 无法打开地点文件（%1）
+
+
+ Cannot read locations file (%1):
+ 无法读取地点文件（%1）：
+
+
+
+%1
+at line %2 column %3
+
+%1
+在第%2行第%3列
+
+
+ Cannot create QgsCoordinateReferenceSystem
+ 无法创建QGIS坐标参照系（QgsCoordinateReferenceSystem）
+
Cannot reproject selected region.
@@ -33917,6 +28590,11 @@ at line %2 column %3
Create location
创建地点
+
+ Cannot create new location: %1
+ 无法创建新地点：%1
+
Create mapset
创建地图集
+
+ Cannot create new mapset directory
+ 无法创建新地图集的目录
+
Cannot open DEFAULT_WIND
@@ -33940,71 +28623,57 @@ at line %2 column %3
New mapset
新建地图集
-
- New mapset successfully created and set as current working mapset.
- 成功创建了新的地图集。新建的地图集已经被设置为当前工作地图集。
-
-
- Cannot create new mapset directory
- 无法创建新地图集的目录
-
-
- Cannot create QgsCoordinateReferenceSystem
- 无法创建QGIS坐标参照系（QgsCoordinateReferenceSystem）
-
-
- No writable locations, the database is not writable!
- 地点目录或文件不能写入，数据库不可写！
-
-
- Regions file (%1) not found.
- 找不到区域文件（%1）。
-
-
- Cannot open locations file (%1)
- 无法打开地点文件（%1）
-
-
- Cannot read locations file (%1):
- 无法读取地点文件（%1）：
-
-
-
-%1
-at line %2 column %3
-
-%1
-在第%2行第%3列
-
-
- Cannot create new location: %1
- 无法创建新地点：%1
-
New mapset successfully created, but cannot be opened: %1
成功创建了新的地图集，但无法打开新建的地图集：%1
+
+ New mapset successfully created and set as current working mapset.
+ 成功创建了新的地图集。新建的地图集已经被设置为当前工作地图集。
+
QgsGrassNewMapsetBase
+
+ New Mapset
+ 新建地图集
+
+
+ GRASS Database
+ GRASS数据库
+
+
+ Tree
+ 树形
+
+
+ Comment
+ 注解
+
Example directory tree:
示例目录树：
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS数据存储在目录树结构中。目录树结构的最顶层目录即为GRASS数据库。</p></body></html>
+
Database Error
@@ -34016,11 +28685,21 @@ at line %2 column %3
Database:
数据库：
+
+ Browse...
+ 浏览...
+
Select existing directory or create a new one:
选择已有的目录或创建一个新目录:
+
+ GRASS Location
+ GRASS地点
+
Location
@@ -34041,6 +28720,25 @@ at line %2 column %3
Location Error
定位错误
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS地点是一个特定地区或项目的地图集合。</p></body></html>
+
+
+ Projection
+ 投影
+
Projection Error
@@ -34051,17 +28749,29 @@ at line %2 column %3
Coordinate system
坐标系统
-
- Projection
- 投影
-
Not defined
未定义的
+
+ Default GRASS Region
+ 默认的GRASS区域
+
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS区域为栅格模块定义了一个工作空间。默认区域对一个地点有效。每个地图集都可以设置一个不同的区域。可以在稍后更改默认地点的区域。</p></body></html>
+
Set current QGIS extent
@@ -34097,6 +28807,12 @@ at line %2 column %3
N
北
+
+ Mapset
+ 地图集（MapSet）
+
New mapset:
@@ -34107,104 +28823,10 @@ at line %2 column %3
Mapset Error
地图集错误
-
- <p align="center">Existing masets</p>
- <p align="center">已有的地图集</p>
-
-
- Location:
- 地点：
-
-
- Mapset:
- 地图集：
-
-
- New Mapset
- 新建地图集
-
-
- GRASS Database
- GRASS数据库
-
-
- Tree
- 树形
-
-
- Comment
- 注解
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS数据存储在目录树结构中。目录树结构的最顶层目录即为GRASS数据库。</p></body></html>
-
-
- Browse...
- 浏览...
-
-
- GRASS Location
- GRASS地点
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS地点是一个特定地区或项目的地图集合。</p></body></html>
-
-
- Default GRASS Region
- 默认的GRASS区域
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS区域为栅格模块定义了一个工作空间。默认区域对一个地点有效。每个地图集都可以设置一个不同的区域。可以在稍后更改默认地点的区域。</p></body></html>
-
-
- Mapset
- 地图集（MapSet）
-
<p align="center">Existing mapsets</p>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -34229,59 +28851,39 @@ p, li { white-space: pre-wrap; }
Create New Mapset
新建地图集
+
+ Location:
+ 地点：
+
+
+ Mapset:
+ 地图集：
+
QgsGrassPlugin
- GRASS
- GRASS
+ GrassVector
+ GRASS矢量
- &GRASS
- GRASS(&G)
+ 0.1
+ 0.1
+
+
+ GRASS layer
+ GRASS图层
Plugins
插件
-
- Open mapset
- 打开地图集
-
-
- New mapset
- 新建地图集
-
-
- Close mapset
- 关闭地图集
-
-
- Add GRASS vector layer
- 添加GRASS矢量图层
-
Add GRASS raster layer
@@ -34307,6 +28909,26 @@ p, li { white-space: pre-wrap; }
Edit Grass Vector layer
编辑GRASS矢量图层
+
+ Open Mapset
+
+
+ New Mapset
+
+
+ Close Mapset
+
+
+ Add GRASS Vector Layer
+
Adds a GRASS vector layer to the map canvas
@@ -34317,6 +28939,11 @@ p, li { white-space: pre-wrap; }
Adds a GRASS raster layer to the map canvas
在地图视图中添加一个GRASS栅格图层
+
+ Open GRASS Tools
+
Displays the current GRASS region as a rectangle on the map canvas
@@ -34333,23 +28960,38 @@ p, li { white-space: pre-wrap; }
编辑当前选中的GRASS矢量图层。
- GrassVector
- GRASS矢量
+ Create New Grass Vector
+
- 0.1
- 0.1
+ &GRASS
+ GRASS(&G)
- GRASS layer
- GRASS图层
-
-
- Create new Grass Vector
- 新建GRASS矢量
+ GRASS
+ GRASS
Cannot open vector %1 in mapset %2
无法打开地图集%2中的矢量%1
+
+ Cannot open GRASS vector:
+ %1
+ 无法打开GRASS矢量：
+ %1
+
New vector name
新矢量的名称
+
+ Cannot create new vector: %1
+ 无法创建新矢量：%1
+
New vector created but cannot be opened by data provider.
@@ -34402,58 +29056,16 @@ p, li { white-space: pre-wrap; }
Cannot start editing.
无法启动编辑功能。
-
- GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
- 未设定数据库根目录（GISDBASE）、地点名称（LOCATION_NAME）或地图集（MAPSET），无法显示当前区域。
-
-
- Cannot open GRASS vector:
- %1
- 无法打开GRASS矢量：
- %1
-
-
- Open Mapset
-
-
- New Mapset
- 新建地图集
-
-
- Close Mapset
-
-
- Add GRASS Vector Layer
-
-
- Open GRASS Tools
-
-
- Create New Grass Vector
-
-
- Cannot create new vector: %1
- 无法创建新矢量：%1
-
Cannot open vector for update.
无法打开并更新矢量。
+
+ GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
+ 未设定数据库根目录（GISDBASE）、地点名称（LOCATION_NAME）或地图集（MAPSET），无法显示当前区域。
+
Cannot read current region: %1
@@ -34490,14 +29102,6 @@ p, li { white-space: pre-wrap; }
QgsGrassRasterProvider
-
- Out of extent
- 超出范围
-
-
- null (no data)
- 空值（无数据）
-
cellhd file %1 does not exist
@@ -34533,16 +29137,16 @@ p, li { white-space: pre-wrap; }
GISDBASE, LOCATION_NAME or MAPSET is not set, cannot display current region.
未设定数据库根目录（GISDBASE）、地点名称（LOCATION_NAME）或地图集（MAPSET），无法显示当前区域。
-
- Cannot write region
- 无法写入区域
-
Cannot read current region: %1
无法读取当前区域：%1
+
+ Cannot write region
+ 无法写入区域
+
QgsGrassRegionBase
@@ -34551,39 +29155,6 @@ p, li { white-space: pre-wrap; }
GRASS Region Settings
GRASS区域设置
-
- N
- 北
-
-
- W
- 西
-
-
- E
- 东
-
-
- S
- 南
-
-
- N-S Res
- 南北向分辨率
-
-
- Rows
- 行
-
-
- Cols
- 列
-
-
- E-W Res
- 东西向分辨率
-
Extent
@@ -34635,6 +29206,11 @@ or change the following values
Columns
列
+
+ Rows
+ 行
+
Border
@@ -34650,14 +29226,6 @@ or change the following values
Width
宽度
-
- OK
- 确定
-
-
- Cancel
- 取消
-
QgsGrassSelect
@@ -34681,10 +29249,6 @@ or change the following values
Select GRASS Mapset
选择GRASS地图集
-
- Warning
- 警告
-
Choose existing GISDBASE
@@ -34738,42 +29302,30 @@ or change the following values
Location
地点（Location）
-
- Browse...
- 浏览...
-
-
- Browse
- 浏览
-
Mapset
地图集（MapSet）
-
- Select or type map name (wildcards '*' and '?' accepted for rasters)
- 选择或输入地图名称(栅格接受通配符'*'和'?')
-
Map name
地图名称
+
+ Select or type map name (wildcards '*' and '?' accepted for rasters)
+ 选择或输入地图名称(栅格接受通配符'*'和'?')
+
Layer
图层
- OK
- 确定
-
-
- Cancel
- 取消
+ Browse...
+ 浏览...
@@ -34803,29 +29355,11 @@ or change the following values
QgsGrassTools
-
- Browser
- 浏览
-
GRASS Tools
GRASS工具
-
- Warning
- 警告
-
-
- GRASS Shell is not compiled.
- GRASS Shell（外壳界面）未被编译。
-
Modules List
模块列表
+
+ Browser
+ 浏览
+
Direct Modules Tree
@@ -34857,6 +29396,24 @@ or change the following values
Direct Modules List
Direct模块列表
+
+ Cannot start command shell (%1)
+ 无法启动命令行界面（%1）
+
+
+ Warning
+ 警告
+
+
+ GRASS Shell is not compiled.
+ GRASS Shell（外壳界面）未被编译。
+
The config file (%1) not found.
@@ -34881,11 +29438,6 @@ at line %2 column %3
%1
在第%2行第%3列
-
- Cannot start command shell (%1)
- 无法启动命令行界面（%1）
-
QgsGrassToolsBase
@@ -34932,61 +29484,60 @@ at line %2 column %3
Add feature
- 添加要素
+
Start editing failed
- 开始编辑失败
+
Provider cannot be opened for editing
- 数据源不能以可写方式打开
+
Stop editing
- 结束编辑
+
Do you want to save the changes to layer %1?
- 你要将更改保存到图层%1吗？
+
Error
- 错误
+
Problems during roll back
- 回滚时发生问题
+
Commit errors
- 提交错误
+
Could not commit changes to layer %1
- 无法提高对图层%1的更改
+
Errors: %1
- 错误：%1
-
+
Show more
- 显示更多
+
@@ -35012,27 +29563,15 @@ at line %2 column %3
数据源
- New file
- 新文件
-
-
- New datasource
- 新数据源
+ Datasource
+
none
无
-
- None
- 无
-
-
- Datasource
- 数据源
-
Select file to replace '%1'
@@ -35064,9 +29603,7 @@ at line %2 column %3
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
- 还有%n个未处理的图层，现在关闭的话将全部丢失。
-
+ 还有%n个未处理的图层，现在关闭的话将全部丢失。
@@ -35076,84 +29613,22 @@ at line %2 column %3
Handle bad layers
处理坏掉的图层
-
- Layer name
- 图层名称
-
-
- Type
- 类型
-
-
- Provider
- 数据源
-
-
- Original filename
- 原始文件名
-
-
- New filename
- 新文件名
-
-
- Original datasource
- 原始数据源
-
-
- New datasource
- 新数据源
-
QgsHandleBadLayersHandler
-
- Handle Bad layers
- 处理坏掉的图层
-
Handle bad layers
- 处理坏掉的图层
+
%1 of %2 bad layers were not fixable.
%2的%1坏图层不可修复.
-
- %1 of %2 bad layers were not not fixable.
- %2个坏掉的图层中，%1个无法修复。
-
QgsHelpViewer
-
- <h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
- <h3>糟糕！QGIS找不到该窗体的帮助。</h3>找不到你所使用的语言版本的%1帮助文件。<br>如果你想创建该语言版本的帮助文件，请联系QGIS开发团队
-
-
- Error
- 错误
-
-
- The QGIS help database is not installed
- QGIS帮助数据库没有安装
-
-
- Quantum GIS Help
- Quantum GIS帮助
-
-
- Quantum GIS Help - %1
- Quantum GIS帮助——%1
-
-
- Failed to get the help text from the database:
- %1
- 从数据库获取帮助文本失败：
- %1
-
QGIS Help
@@ -35167,38 +29642,6 @@ at line %2 column %3
QGIS Help
QGIS帮助
-
- &Home
- 主目录(&H)
-
-
- Alt+H
- Alt+H
-
-
- &Forward
- 前进(&F)
-
-
- Alt+F
- Alt+F
-
-
- &Back
- 后退(&B)
-
-
- Alt+B
- Alt+B
-
-
- &Close
- 关闭(&C)
-
-
- Alt+C
- Alt+C
-
about:blank
@@ -35230,16 +29673,6 @@ at line %2 column %3
WMS Server responded unexpectedly with HTTP Status Code %1 (%2)
WMS服务器意外地返回了HTTP状态代码%1（%2）
-
- HTTP response completed, however there was an error: %1
- HTTP响应完成，但有一个错误：%1
-
-
- HTTP transaction completed, however there was an error: %1
- HTTP交易完成，但有一个错误：%1
-
Received %1 of %2 bytes
@@ -35250,6 +29683,16 @@ at line %2 column %3
Received %1 bytes (total unknown)
接收到%1个字节（大小总和未知）
+
+ HTTP response completed, however there was an error: %1
+ HTTP响应完成，但有一个错误：%1
+
+
+ HTTP transaction completed, however there was an error: %1
+ HTTP交易完成，但有一个错误：%1
+
Not connected
@@ -35290,10 +29733,8 @@ at line %2 column %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
- 闲置%n秒后，网络超时。
-可能是您的网络连接有问题，也可能是WMS服务器有问题。
-
+ 闲置%n秒后，网络超时。
+可能是您的网络连接有问题，也可能是WMS服务器有问题。
@@ -35309,77 +29750,6 @@ This may be a problem in your network connection or at the WMS server.
距离系数P
-
- QgsIdentifyResults
-
- Feature
- 要素
-
-
- Value
- 值
-
-
- (Derived)
- （派生）
-
-
- Copy attribute value
- 复制属性值
-
-
- Copy feature attributes
- 复制要素属性
-
-
- Attribute changes
- 更改属性
-
-
- Zoom to feature
- 缩放到要素范围
-
-
- Identify Results
- 识别结果
-
-
- (Actions)
- （动作）
-
-
- Expand all
- 全部展开
-
-
- Collapse all
- 全部折叠
-
-
- Edit feature form
- 编辑要素窗体
-
-
- View feature form
- 查看要素窗体
-
-
- Clear results
- 清除结果
-
-
- Clear highlights
- 清除突出现实
-
-
- Highlight all
- 全部突出显示
-
-
- Highlight layer
- 突出显示图层
-
-
QgsIdentifyResultsBase
@@ -35387,29 +29757,25 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
结果
-
- Tree
- 树形
-
Layer
- 图层
+
FID
-
Attribute
- 属性
+
Value
- 值
+
...
...
+
+ Clear Results
+
+
+ Help
+
+
+ Select identify mode
+
+
+ Mode
+
+
+ Select view mode for raster layers
+
+
+ View
+
+
+ Auto open form
+
Collapse tree.
@@ -35437,11 +29838,6 @@ This may be a problem in your network connection or at the WMS server.
New results will be expanded by default.
新的结果将默认自动展开。
-
- Clear Results
-
Copy selected feature to clipboard.
@@ -35452,36 +29848,6 @@ This may be a problem in your network connection or at the WMS server.
Print selected HTML response.
打印选中的HTML响应。
-
- Help
- 帮助
-
-
- Select identify mode
-
-
- Mode
- 模式
-
-
- Select view mode for raster layers
-
-
- View
- 视图
-
-
- Auto open form
-
QgsIdentifyResultsDialog
@@ -35503,22 +29869,22 @@ This may be a problem in your network connection or at the WMS server.
Current layer
- 当前图层
+
Top down, stop at first
- 从上往下，止于第一个
+
Top down
- 从上往下
+
Layer selection
-
Table
-
Tree
- 树形
+
Graph
-
feature id
- 要素标识码
+
No attributes.
-
Toggle feature selection
-
Activate layer
-
Attributes changed
- 更改属性
-
-
- Attribute changes
- 更改属性
+
Cannot print
无法打印
-
- Could not open url
- 无法打开地址
-
-
- Could not open URL '%1'
- 无法打开地址”%1“
-
-
- Cannot not print
- 无法打印
-
Cannot print this item
@@ -35762,17 +30112,6 @@ This may be a problem in your network connection or at the WMS server.
QgsInterpolationDialogBase
-
- Output
- 输出
-
-
- ...
- ...
-
Interpolation plugin
@@ -35783,31 +30122,21 @@ This may be a problem in your network connection or at the WMS server.
Input
输入
+
+ Vector layers
+ 矢量图层
+
+
+ Interpolation attribute
+ 插值属性
+
Use z-Coordinate for interpolation
使用z坐标插值
-
- Interpolation method
- 插值方法
-
-
- Number of columns
- 列数
-
-
- Number of rows
- 行数
-
-
- Output file
- 输出文件
-
Add
@@ -35834,19 +30163,30 @@ This may be a problem in your network connection or at the WMS server.
类型
- Set to current extent
- 当前范围
+ Output
+ 输出
- Vector layers
- 矢量图层
+ Interpolation method
+ 插值方法
- Interpolation attribute
- 插值属性
+ ...
+ ...
+
+
+ Number of columns
+ 列数
+
+
+ Number of rows
+ 行数
Y max
纵坐标最大值
+
+ Set to current extent
+ 当前范围
+
+
+ Output file
+ 输出文件
+
Add result to project
@@ -35900,7 +30250,7 @@ This may be a problem in your network connection or at the WMS server.
The inverted polygon renderer only applies to polygon and multipolygon layers.
'%1' is not a polygon layer and then cannot be displayed
-
@@ -35908,52 +30258,17 @@ This may be a problem in your network connection or at the WMS server.
Form
- 窗体
+
Sub renderer:
-
Merge polygons before rendering (slow)
-
-
-
- QgsItemPositionDialogBase
-
- Set item position
- 设置条目位置
-
-
- Coordinates
- 坐标
-
-
- Width
- 宽度
-
-
- Height
- 高度
-
-
- Set Position
- 设置位置
-
-
- Close
- 关闭
-
-
- x
- 横坐标
-
-
- y
- 纵坐标
+
@@ -35990,64 +30305,15 @@ This may be a problem in your network connection or at the WMS server.
窗体1
- Preview:
- 预览:
+ Label Properties
+ 标签属性
- QGIS Rocks!
- QGIS真棒！
-
-
- Font
- 字体
-
-
- %
- %
-
-
- Transparency:
- 透明度：
-
-
- Size:
- 大小:
-
-
- Above
- 上面
-
-
- Over
- 中间
-
-
- Left
- 左边
-
-
- Below
- 下面
-
-
- Right
- 右边
-
-
- Above Right
- 右上方
+ Placement
+ 位置
右下方
- Above Left
- 左上方
+ Right
+ 右边
+
+
+ Below
+ 下面
+
+
+ Over
+ 中间
+
+
+ Above
+ 上面
+
+
+ Left
+ 左边
左下方
- Placement
- 位置
+ Above Right
+ 右上方
+
+
+ Above Left
+ 左上方
+
+
+ Use scale dependent rendering
+ 依比例渲染
+
+
+ Maximum
+ 最大值
+
+
+ Minimum
+ 最小值
+
+
+ Buffer labels
+ 给标签加上轮廓缓冲区
+
+
+ Buffer size
+ 轮廓缓冲区大小
+
+
+ In points
+ 点
+
+
+ In map units
+ 地图单位
+
+
+ Color
+ 颜色
+
+
+ %
+ %
+
+
+ Transparency
+ 透明度
+
+
+ Offset
+ 偏移
+
+
+ X offset
+ 横坐标偏移
+
+
+ Y offset
+ 纵坐标偏移
+
+
+ Basic label options
+ 基本标签选项
默认标签
- Data defined buffer
- 由数据定义轮廓缓冲区
-
-
- Data defined position
- 由数据定义位置
-
-
- Color
- 颜色
+ Font size
+ 字体大小
Angle (deg)
角度
-
- Buffer size
- 轮廓缓冲区大小
+
+ °
+ °
- X Offset (pts)
- 横坐标偏移（pts）
+ Font
+ 字体
- Y Offset (pts)
- 纵坐标偏移（pts）
+ Multiline labels?
+ 多行标签？
- Buffer labels
- 给标签加上轮廓缓冲区
+ Label only selected features
+ 仅为选中的要素加标签
+
+
+ Advanced
+ 高级
+
+
+ Data defined placement
+ 由数据定义布局
+
+
+ Data defined properties
+ 由数据定义属性
Size units
大小单位
+
+ &Color
+ 颜色(&C)
+
Strikeout
删除线
+
+ Data defined buffer
+ 由数据定义轮廓缓冲区
+
+
+ Transparency:
+ 透明度：
+
+
+ Size:
+ 大小:
+
+
+ Data defined position
+ 由数据定义位置
+
X Coordinate
@@ -36168,121 +30562,38 @@ This may be a problem in your network connection or at the WMS server.
纵坐标
- Multiline labels?
- 多行标签？
+ X Offset (pts)
+ 横坐标偏移（pts）
- Label Properties
- 标签属性
+ Y Offset (pts)
+ 纵坐标偏移（pts）
- Use scale dependent rendering
- 依比例渲染
+ Preview:
+ 预览:
- Maximum
- 最大值
-
-
- Minimum
- 最小值
-
-
- In points
- 点
-
-
- In map units
- 地图单位
-
-
- Transparency
- 透明度
-
-
- Offset
- 偏移
-
-
- X offset
- 横坐标偏移
-
-
- Y offset
- 纵坐标偏移
-
-
- °
- °
-
-
- Label only selected features
- 仅为选中的要素加标签
-
-
- Advanced
- 高级
-
-
- &Color
- 颜色(&C)
-
-
- Font size
- 字体大小
-
-
- Basic label options
- 基本标签选项
-
-
- Data defined placement
- 由数据定义布局
-
-
- Data defined properties
- 由数据定义属性
+ QGIS Rocks!
+ QGIS真棒！
QgsLabelPropertyDialog
- Label font
- 标签字体
+ Expression result
+ 表达式结果
Font color
字体颜色
-
- Expression result
- 表达式结果
-
Buffer color
@@ -36306,42 +30617,17 @@ This may be a problem in your network connection or at the WMS server.
Font
字体
+
+ Available typeface styles
+ 可用的字体样式
+
Size
大小
-
- Display
- 显示
-
-
- Show label
- 显示标签
-
-
- Max
- 最大值
-
-
- Min
- 最小值
-
-
- Scale-based
- 基于比例尺
-
-
- Available typeface styles
- 可用的字体样式
-
Style
@@ -36391,6 +30677,31 @@ This may be a problem in your network connection or at the WMS server.
I
斜体
+
+ Display
+ 显示
+
+
+ Scale-based
+ 基于比例尺
+
+
+ Min
+ 最小值
+
+
+ Max
+ 最大值
+
+
+ Show label
+ 显示标签
+
Ignores priority and permits collisions/overlaps
@@ -36445,8 +30756,9 @@ This may be a problem in your network connection or at the WMS server.
QgsLabelingGui
- pt
- 点
+ points
+
map units
- 地图单位
-
-
- points
- 点
+
mm
- 毫米
+
% of length
- 长度的百分比
+
+
+ %1 not found. Default substituted.
+ %1未找到.将使用默认值.
+
+
+ Chosen font
+ 选择的字体
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
在编辑模式下, 图层的相关 地图标志工具为:<br> 已定义属性字段 -> <i>enabled</i><br> 已定义表达式 -> <i>disabled</i>
+
+ Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
+ 值 < 0代表比1:1更接近的比例, e.g. -10 = 10:1<br>值0表示禁止特定的限制.
+
int [1-1000]
@@ -36542,25 +30864,6 @@ This may be a problem in your network connection or at the WMS server.
int [1-10000]
整型 [1-10000]
-
- (not found!)
- （找不到！）
-
-
- %1 not found. Default substituted.
- %1未找到.将使用默认值.
-
-
- Chosen font
- 选择的字体
-
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
- 值 < 0代表比1:1更接近的比例, e.g. -10 = 10:1<br>值0表示禁止特定的限制.
-
Text/Buffer sample
@@ -36581,10 +30884,6 @@ This may be a problem in your network connection or at the WMS server.
(BUFFER NOT SHOWN, in map units)
（缓冲区未显示，使用地图单位）
-
- Expression based label
- 基于表达式的标签
-
No change
@@ -36620,26 +30919,6 @@ This may be a problem in your network connection or at the WMS server.
File not found
未找到文件
-
- Mixed Case
- 大小写混合
-
-
- All Uppercase
- 全部大写
-
-
- All Lowercase
- 全部小写
-
-
- Title Case
- 标题大小写
-
-
- Select SVG symbol
- 选择SVG符号
-
QgsLabelingGuiBase
@@ -36649,455 +30928,9 @@ This may be a problem in your network connection or at the WMS server.
图层标签设置
- Expression
- 表达式
-
-
- Label settings
- 标签设置
-
-
- Text/Buffer sample
- 文本/缓冲区样例
-
-
- Sample text
- 样例文本
-
-
- Reset sample text
- 重置样例文本
-
-
- Size for sample text in map units
- 样例文本的地图单位大小
-
-
- Sample background color
- 样例的背景颜色
-
-
- Formatting
- 格式
-
-
- Shadow
- 阴影
-
-
- Rendering
- 渲染
-
-
- letter
- 字母
-
-
- Spacing
- 间距
-
-
- Blend mode
- 混合模式
-
-
- word
- 单词
-
-
- Underlined text
- 下划线文本
-
-
- Bold text
-(data defined only, overrides Style)
- 粗体文本
-（仅由数据定义，覆盖样式设置）
-
-
- B
- 粗体
-
-
- Italic text
-(data defined only, overrides Style)
- 斜体文本
-（仅由数据定义，覆盖样式设置）
-
-
- I
- 斜体
-
-
- Font is missing.
- 未找到对应字体.
-
-
- Text formatting
- 文本格式
-
-
- Multiple lines
- 多行
-
-
- Wrap on character
- 按该字符换行
-
-
- Line height
- 行高
-
-
- Line height spacing for multi-line text
- 多行文本的行高间距
-
-
- line
- 行
-
-
- Alignment
- 对齐
-
-
- Paragraph style alignment of multi-line text
- 多行文本的段落对齐样式
-
-
- Left
- 左边
-
-
- Center
- 中间
-
-
- Right
- 右边
-
-
- Line direction symbol
- 行方向符号
-
-
- Text buffer
- 文本缓冲区
-
-
- Draw text buffer
- 绘制文本缓冲区
-
-
- Pen join style
- 画笔连接样式
-
-
- Force point inside polygon
-
-
- Repeat
-
-
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
- 值 < 0代表比1:1更接近的比例, e.g. -10 = 10:1<br>值0表示禁止特定的限制.
-
-
- Discourage labels from covering features
- 不主张标签覆盖要素
-
-
- Blending mode
- 混合模式
-
-
- Available typeface styles
- 可用的字体样式
-
-
- Underlined Text
- 下划线文本
-
-
- U
- 下
-
-
- Strikeout text
- 给文本加上删除线
-
-
- S
- 南
-
-
- points
- 点
-
-
- map units
- 地图单位
-
-
- Style
- 样式
-
-
- Transparency
- 透明度
-
-
- %
- %
-
-
- Word spacing
- 单词间距
-
-
- Letter spacing
- 字符间距
-
-
- Space in pixels or map units, relative to size unit choice
- 像素或地图单位间距，与大小单位选择相关
-
-
- Type case
- 铅字盘
-
-
- Capitalization style of text
- 文本的大写样式
-
-
- mm
- 毫米
-
-
- Color area inside of pen stroke
- 笔画内部填充颜色
-
-
- Minimum
- 最小比例尺
-
-
- Maximum
- 最大比例尺
-
-
- Advanced
- 高级
-
-
- Options
- 选项
-
-
- Label every part of multi-part features
- 给多部件要素的每个部件都加上标签
-
-
- Capitalization
- 大写
-
-
- Multi-line align
- 多行对齐
-
-
- Add label columns to attribute table
- 将标签字段添加到属性表
-
-
- About data defined values
- 关于由数据定义的值
-
-
- Merge connected lines to avoid duplicate labels
- 合并相连的线条以防止重复标签
-
-
- Add direction symbol
- 添加方向符号
-
-
- Features don't act as obstacles for labels
- 要素不阻碍标签
-
-
- Wrap label on character
- 代表换行的字符或字符串
-
-
- Placement
- 位置
-
-
- around point
- 点周围
-
-
- over point
- 点所在位置
-
-
- parallel
- 平行
-
-
- curved
- 弯曲
-
-
- horizontal
- 水平
-
-
- over centroid
- 质心所在位置
-
-
- around centroid
- 质心周围
-
-
- horizontal (slow)
- 水平摆放（慢）
-
-
- free (slow)
- 自由摆放（慢）
-
-
- using perimeter
- 使用要素外围线条定位
-
-
- Label distance
- 标签距离
-
-
- Rotation
- 旋转角度
-
-
- degrees
- 度
-
-
- above line
- 线条上方
-
-
- on line
- 线条中间
-
-
- below line
- 线条下方
-
-
- Orientation
- 方向
-
-
- Text style
- 文本样式
-
-
- Font
- 字体
-
-
- TextLabel
- 文本标签
+ Label this layer with
+ 给该图层加上标签，标签字段为
...
...
-
- Color
- 颜色
-
-
- Buffer
- 使用轮廓缓冲区
-
-
- Size
- 大小
-
-
- mm
- 毫米
-
-
- Sample
- 标签样例
-
Lorem Ipsum 乱数假文
- In points
- 点
+ Sample text
+ 样例文本
- In map units
- 地图单位
+ Reset sample text
+ 重置样例文本
- Priority
- 优先级
+ Size for sample text in map units
+ 样例文本的地图单位大小
- Low
- 低
+ Sample background color
+ 样例的背景颜色
- High
- 高
-
-
- Scale-based visibility
- 依赖于地图比例尺的可见性
-
-
- Label this layer with
- 给该图层加上标签，标签字段为
+ Line direction symbol
+ 行方向符号
显示加号
- Centroid
- 质心
+ Multiple lines
+ 多行
- abc
- 甲乙丙
+ Automated placement settings (apply to all layers)
+ 自动布局设置（应用于所有图层）
- Quadrant
- 象限
+ Text/Buffer Sample
+ 文本/缓冲区样例
- Distance
- 距离
+ Text
+ 文本
- Formatting
+ 格式
+
+
+ Shadow
+ 阴影
+
+
+ Rendering
+ 渲染
+
+
+ letter
+ 字母
+
+
+ Spacing
+ 间距
+
+
+ Blend mode
+ 混合模式
+
+
+ word
+ 单词
+
+
+ Underlined text
+ 下划线文本
+
+
+ Bold text
+(data defined only, overrides Style)
+ 粗体文本
+（仅由数据定义，覆盖样式设置）
+
+
+ B
+ 粗体
+
+
+ Italic text
+(data defined only, overrides Style)
+ 斜体文本
+（仅由数据定义，覆盖样式设置）
+
+
+ I
+ 斜体
+
+
+ Font is missing.
+ 未找到对应字体.
+
+
+ Text formatting
+ 文本格式
+
+
+ Wrap on character
+ 按该字符换行
+
+
+ Line height
+ 行高
+
+
+ Line height spacing for multi-line text
+ 多行文本的行高间距
+
+
+ line
+ 行
+
+
+ Alignment
+ 对齐
+
+
+ Paragraph style alignment of multi-line text
+ 多行文本的段落对齐样式
+
+
+ Left
+ 左边
+
+
+ Center
+ 中间
+
+
+ Right
+ 右边
+
+
+ Force point inside polygon
+
+
+ Repeat
+
+
+ Discourage labels from covering features
+ 不主张标签覆盖要素
+
+
+ Text style
+ 文本样式
+
+
+ Available typeface styles
+ 可用的字体样式
+
+
+ U
+ 下
+
+
+ Strikeout text
+ 给文本加上删除线
+
+
+ S
+ 南
+
+
+ Style
+ 样式
+
+
+ Transparency
+ 透明度
+
+
+ %
+ %
+
+
+ Capitalization style of text
+ 文本的大写样式
+
+
+ Space in pixels or map units, relative to size unit choice
+ 像素或地图单位间距，与大小单位选择相关
+
+
+ Type case
+ 铅字盘
+
+
+ Font
+ 字体
+
+
+ Color
+ 颜色
+
+
+ Size
+ 大小
+
+
+ Buffer
+ 使用轮廓缓冲区
+
+
+ Labels will not show if larger than this on screen
+ 若在屏幕中大于此则不显示标签
+
+
+ px
+ 像素
+
+
+ Data defined
数据定义的
- X
横坐标
- Y
纵坐标
- Coordinate
坐标
- Preserve data rotation values
保存数据旋转值
- horizontal
+ 水平
+
+
+ vertical
垂直
- Label options
标签选项
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
+ 值 < 0代表比1:1更接近的比例, e.g. -10 = 10:1<br>值0表示禁止特定的限制.
+
+
+ Maximum
+ 最大比例尺
+
+
+ Pixel size-based visibility (labels in map units)
基于像素大小的显示特性（标签为地图单位）
- Feature options
- 要素选项
+ Labels will not show if smaller than this on screen
+ 若在屏幕中小于此则不显示标签
- Suppress labeling of features smaller than
- 小于这个尺寸的要素不贴标签
+ Minimum
+ 最小比例尺
- Engine settings
- 引擎设置
+ <
+ <
- In mm
- 毫米
+ Scale-based visibility
+ 依赖于地图比例尺的可见性
- Line orientation dependent position
- 位置取决于线条方向
+ >
+ >
- Data defined settings
- 由数据定义设置
-
-
- Font properties
- 字体属性
-
-
- Bold
- 粗体
-
-
- Italic
- 斜体
-
-
- Underline
- 下划线
-
-
- Font family
- 字体系列
-
-
- Position
+ Placement
位置
- Automated placement settings
- 自动布局设置
+ left/right
+ 左/右
+
+
+ above
+ 上面
+
+
+ below
+ 下面
+
+
+ Reverse direction
+ 反向
+
+
+ Priority
+ 优先级
+
+
+ Low
+ 低
+
+
+ High
+ 高
弯曲
- Edit expression
- 编辑表达式
+ Text buffer
+ 文本缓冲区
- Automated placement settings (apply to all layers)
- 自动布局设置（应用于所有图层）
-
-
- Text/Buffer Sample
- 文本/缓冲区样例
+ Draw text buffer
+ 绘制文本缓冲区
Draw drop shadow
绘制阴影
+
+ Blur radius
+ 模糊半径
+
+
+ Blur only alpha pixels
+ 只模糊alpha像素
+
Label's rotation is ignored
@@ -37486,6 +31556,22 @@ This may be a problem in your network connection or at the WMS server.
Use global shadow
使用全局阴影
+
+ ˚
+ 度
+
+
+ Lowest label component
+ 最低标签组件
+
+
+ Draw under
+ 绘制于
+
Horizontal
@@ -37526,6 +31612,13 @@ This may be a problem in your network connection or at the WMS server.
whole polygon
整个多边形
+
+ Rotation
+ 旋转角度
+
Above line
@@ -37542,70 +31635,57 @@ This may be a problem in your network connection or at the WMS server.
线条下方
- X
- 横坐标
+ Line orientation dependent position
+ 位置取决于线条方向
- Line direction symbols
- 行方向符号
+ Centroid
+ 质心
- Symbol(s)
- 符号
+ abc
+ 甲乙丙
- <
- <
+ Quadrant
+ 象限
- Label
- 标签
+ Distance
+ 距离
- >
- >
+ outside
+ 外面
- left/right
- 左/右
+ inside
+ 里面
- above
- 上面
+ Maximum angle between curved characters
+ 弧形弯曲字符之间的最大夹角
- below
- 下面
-
-
- Reverse direction
- 反向
-
-
- Labels will not show if larger than this on screen
- 若在屏幕中大于此则不显示标签
-
-
- px
- 像素
-
-
- Labels will not show if smaller than this on screen
- 若在屏幕中小于此则不显示标签
-
-
- Label in Map Units
- 地图单位表示的标签
+ Pen join style
+ 画笔连接样式
Offset
偏移量
-
- Y
- 纵坐标
-
-
- %
- %
-
Scale
@@ -37638,63 +31710,11 @@ This may be a problem in your network connection or at the WMS server.
Background
背景
-
- Draw under
- 绘制于
-
-
- Lowest label component
- 最低标签组件
-
-
- Text
- 文本
-
-
- ˚
- 度
-
-
- @
- @
-
-
- Blur radius
- 模糊半径
-
-
- Blur only alpha pixels
- 只模糊alpha像素
-
-
- Select SVG symbol
- 选择SVG符号
-
-
- Fill
- 填充
-
-
- Size X,Y
- 横、纵大小
-
Load symbol parameters
载入符号参数
-
- % of length
- 长度的百分比
-
符号单位
- Border
- 边界
+ Merge connected lines to avoid duplicate labels
+ 合并相连的线条以防止重复标签
- outside
- 外面
+ Label every part of multi-part features
+ 给多部件要素的每个部件都加上标签
- inside
- 里面
+ Feature options
+ 要素选项
- Maximum angle between curved characters
- 弧形弯曲字符之间的最大夹角
+ Suppress labeling of features smaller than
+ 小于这个尺寸的要素不贴标签
- Above Right
- 右上方
+ mm
+ 毫米
- Above Left
- 左上方
-
-
- Over
- 中间
-
-
- Above
- 上面
-
-
- Below Left
- 左下方
-
-
- Below
- 下面
-
-
- Below Right
- 右下方
-
-
- Show all labels for this layer (including colliding labels)
显示该图层的所有标签（包括重叠的标签）
- Show upside-down labels
显示倒转的标签
- never
从不
- when rotation defined
当定义了旋转角度时
- always
总是
- Limit number of features to be labeled to
限制贴标签的要素数量为
- Number of features sent to labeling engine, though not all may be labeled
发送到标签引擎的要素数量，尽管不是全部都会贴上标签
- Buffer transparency
- 缓冲区透明度
+ Position
+ 位置
- X Coordinate
- 横坐标
-
-
- Y Coordinate
- 纵坐标
-
-
- Horizontal alignment
- 水平对齐
-
-
- Vertical alignment
- 垂直对齐
-
-
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
取消勾选会在钉住时写入源于标签引擎的旋转，非钉住时写入NULL
- Display properties
- 显示属性
-
-
- Always show
总是显示
- Minimum scale
- 最小比例尺
-
-
- Show label
显示标签
-
- Maximum scale
- 最大比例尺
-
-
- Strikeout
- 删除线
-
-
- Buffer properties
- 轮廓缓冲区属性
-
-
- Buffer size
- 轮廓缓冲区大小
-
-
- Buffer color
- 轮廓缓冲区颜色
-
QgsLayerPropertiesWidget
@@ -37919,15 +31874,15 @@ This may be a problem in your network connection or at the WMS server.
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
- 以下%1条目未显示
+
@@ -37935,231 +31890,60 @@ not displayed
&Add Group
-
&Remove
- 移除(&R)
+
&Show in overview
-
Re&name
- 重命名 (&n)
+
Show Feature Count
- 显示要素数目
+
&Zoom to Layer
-
&Zoom to Group
-
&Move to Top-level
-
&Group Selected
- 选择组(&G)
-
-
-
- QgsLegend
-
- sub-group
- 亚组
-
-
- group
- 组
-
-
- &Properties
- 属性(&P)
-
-
- &Make to Toplevel Item
- 对顶层选项进行操作（&M）
-
-
- Zoom to Group
- 缩放到组
-
-
- &Remove
- 移除(&R)
-
-
- &Set Group CRS
- 设置组的坐标参照系(&S)
-
-
- &Group Selected
- 选择组(&G)
-
-
- Copy Style
- 复制样式
-
-
- Paste Style
- 粘贴样式
-
-
- &Add New Group
- 添加新组(&A)
-
-
- &Expand All
- 全部展开(&E)
-
-
- &Collapse All
- 全部折叠(&C)
-
-
- &Update Drawing Order
- 更新绘图顺序(&U)
-
-
- Not fully defined drawing order set to legend order.
- 将未完整定义的绘制顺序设置为图例顺序.
-
-
- Legend
- 图例
-
-
- Legend context
- 图例上下文
-
-
- Re&name
- 重命名 (&n)
-
-
- &Add group
- 添加组 (&A)
-
-
- &Expand all
- 全部展开 (&E)
-
-
- &Collapse all
- 全部折叠 (&C)
-
-
-
- QgsLegendLayer
-
- &Zoom to layer extent
- 缩放到图层的范围 (&Z)
-
-
- &Remove
- 移除(&R)
-
-
- &Open attribute table
- 打开属性表(&O)
-
-
- &Query...
- 查询(&Q)...
-
-
- following %1 items
-not displayed
- 以下%1条目未显示
-
-
- &Zoom to Layer Extent
- 缩放到图层范围 (&Z)
-
-
- &Zoom to Best Scale (100%)
- 缩放到最佳比例（100%）(&Z)
-
-
- &Stretch Using Current Extent
- 使用当前范围进行拉伸（&S）
-
-
- &Show in Overview
- 在鹰眼图中显示(&S)
-
-
- &Duplicate
- 创建副本(&D)
-
-
- &Set Layer CRS
- 设置图层的坐标参照系(&S)
-
-
- Set &Project CRS from Layer
- 将图层的坐标参照系设定为项目的坐标参照系(&P)
-
-
- &Open Attribute Table
- 打开属性表(&O)
-
-
- Save As...
- 另存为...
-
-
- Save Selection As...
- 将选中的部分另存为...
-
-
- &Filter...
- 过滤(&F)...
-
-
- Show Feature Count
- 显示要素数目
-
-
- &Properties
- 属性(&P)
-
-
- Updating feature count for layer %1
- 正在更新%1图层的要素数目
-
-
- Abort
- 放弃
+
QgsLegendModel
- Group
组
- No Legend Available
-
@@ -38168,13 +31952,13 @@ not displayed
Millimeter
- 毫米
+
Map unit
- 地图单位
+
颜色
-
- QgsLinearlyScalingDialog
-
- Millimeter
- 毫米
-
-
- Map units
- 地图单位
-
-
-
- QgsLinearlyScalingDialogBase
-
- Form
- 窗体
-
-
- Find maximum value
- 查找最大值
-
-
- Size
- 大小
-
-
- Size unit
- 单位
-
-
QgsLoadStyleFromDBDialogLayout
-
- Add column
- 添加字段
-
Styles related to the layer
@@ -38257,20 +32007,6 @@ not displayed
QgsManageConnectionsDialog
-
- Save
- 保存
-
-
- Save connections
- 保存连接
-
-
- XML files (*.xml *.XML)
- XML文件(*.xml *.XML)
-
Select all
@@ -38306,6 +32042,16 @@ not displayed
You should select at least one connection from list.
你至少要在列表中选择一个连接。
+
+ Save connections
+ 保存连接
+
+
+ XML files (*.xml *.XML)
+ XML文件(*.xml *.XML)
+
Saving connections
@@ -38419,45 +32165,24 @@ not displayed
Select connections to export
选择要导出的连接
-
- Browse
- 浏览
-
QgsMapCanvas
- canvas
-
- Canvas refresh: %1 ms
- 视图刷新：%1毫秒
-
-
- , sender '%1'
- ，发送者‘%1’
-
-
- Rendering
渲染
- Could not draw %1 because:
-%2
- COMMENTED OUT
- 无法绘制%1，因为：
-%2
-
-
- Could not draw %1 because:
-%2
- 无法绘制%1，因为：
-%2
+ Canvas refresh: %1 ms
+
@@ -38490,14 +32215,6 @@ not displayed
Y / North:
纵坐标/北：
-
- X:
- 横坐标：
-
-
- Y:
- 纵坐标：
-
Snap to background layers
@@ -38506,6 +32223,12 @@ not displayed
QgsMapLayer
+
+ Specify CRS for layer %1
+ 给%1指定坐标参照系
+
%1 at line %2 column %3
%1在第%2行第%3列
-
- Style not found in database
-
Error: qgis element could not be found in %1
错误：无法在%1找到qgis元素
+
+ Loading style file %1 failed because:
+%2
+ 样式文件%1载入失败，因为：
+%2
+
+
+ Could not save symbology because:
+%1
+ 无法保存符号，因为：
+%1
+
+
+ The directory containing your dataset needs to be writable!
+ 包含你的数据集的目录必须是可写的！
+
+
+ Style not found in database
+
+
+ Created default style file as %1
+ 创建默认样式文件%1
+
+
+ ERROR: Failed to created default style file as %1. Check file permissions and retry.
+ 错误：创建默认样式文件%1时失败。请检查文件权限然后重试。
+
User database could not be opened.
@@ -38563,49 +32319,6 @@ not displayed
Unable to open file %1
无法打开文件%1
-
- style not found in database
- 数据库中找不到样式
-
-
- Specify CRS for layer %1
- 给%1指定坐标参照系
-
-
- Loading style file %1 failed because:
-%2
- 样式文件%1载入失败，因为：
-%2
-
-
- Could not save symbology because:
-%1
- 无法保存符号，因为：
-%1
-
-
- The directory containing your dataset needs to be writable!
- 包含你的数据集的目录必须是可写的！
-
-
- Created default style file as %1
- 创建默认样式文件%1
-
-
- ERROR: Failed to created default style file as %1. Check file permissions and retry.
- 错误：创建默认样式文件%1时失败。请检查文件权限然后重试。
-
QgsMapRenderer
@@ -38625,12 +32338,9 @@ not displayed
QgsMapToolAddFeature
- Not a vector layer
- 不是矢量图层
-
-
- The current layer is not a vector layer
- 当前图层不是矢量图层
+ add feature
+ 添加要素
The data provider for this layer does not support the addition of features.
该图层的数据源不支持添加要素。
-
- Layer not editable
- 图层不可编辑
-
Cannot add feature. Unknown WKB type
无法添加要素。位置的WKB类型
-
- The feature cannot be added because it's geometry is empty
- 无法添加该要素，因其几何图形为空
-
-
- The feature cannot be added because it's geometry collapsed due to intersection avoidance
- 不能添加该要素，因为要避免相交，导致其几何图形相互重叠
-
-
- Feature added
- 添加要素
-
-
- add feature
- 添加要素
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- 不能编辑该矢量图层。请点击“切换编辑状态”以使之可编辑。
-
The feature could not be added because removing the polygon intersections would change the geometry type
@@ -38728,32 +32411,19 @@ not displayed
An error was reported during intersection removal
移除相交时报告了一个错误
-
-
- QgsMapToolAddIsland
- Layer not editable
- 图层不可编辑
+ The feature cannot be added because it's geometry is empty
+ 无法添加该要素，因其几何图形为空
+
+
+ The feature cannot be added because it's geometry collapsed due to intersection avoidance
+ 不能添加该要素，因为要避免相交，导致其几何图形相互重叠
QgsMapToolAddPart
-
- Not a vector layer
- 不是矢量图层
-
-
- The current layer is not a vector layer
- 当前图层不是矢量图层
-
-
- Layer not editable
- 图层不可编辑
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- 不能编辑该矢量图层。请点击“切换编辑状态”以使之可编辑。
-
Several features are selected. Please select only one feature to which an part should be added.
选择了多个要素。请只选择一个要添加部件的要素。
-
- Error. Could not add part.
- 错误，无法添加部件。
-
Part added
添加部件
-
- Coordinate transform error
- 坐标参照系转换失败
-
-
- Cannot transform the point to the layers coordinate system
- 不能将点转换到图层坐标参照系
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected geometry could not be found
找不到选中的几何图形
-
- Error, could not add part
- 错误，无法添加部件
-
QgsMapToolAddRing
-
- Not a vector layer
- 不是矢量图层
-
-
- The current layer is not a vector layer
- 当前图层不是矢量图层
-
-
- Layer not editable
- 图层不可编辑
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- 不能编辑该矢量图层。请点击“切换编辑状态”以使之可编辑。
-
Coordinate transform error
@@ -38851,6 +32489,11 @@ not displayed
Cannot transform the point to the layers coordinate system
不能将点转换到图层坐标参照系
+
+ Ring added
+ 添加环形
+
A problem with geometry type occured
@@ -38886,18 +32529,6 @@ not displayed
Error, could not add ring
错误，无法添加环形
-
- Ring added
- 添加环形
-
-
-
- QgsMapToolAddVertex
-
- Added vertex
- 添加顶点
-
QgsMapToolCapture
@@ -38914,10 +32545,6 @@ not displayed
QgsMapToolChangeLabelProperties
-
- Label properties changed
- 更改标签属性
-
Changed properties for label
@@ -38927,35 +32554,27 @@ not displayed
QgsMapToolDeletePart
- Delete part
- 删除部件
-
-
- This isn't a multipart geometry.
- 这不是多部件几何图形。
+ Part of multipart feature deleted
+ 删除多部件要素的一部分
Couldn't remove the selected part.
无法删除选中的部件。
-
- Part of multipart feature deleted
- 删除多部件要素的一部分
-
QgsMapToolDeleteRing
Delete ring
-
Delete ring can only be used in a polygon layer.
-
删除环形
-
- QgsMapToolDeleteVertex
-
- Vertex deleted
- 删除顶点
-
-
QgsMapToolEdit
@@ -38978,19 +32590,11 @@ not displayed
No active vector layer
没有活动矢量图层
-
- Choose a vector layer in the legend
- 在图例中选择一个矢量图层
-
Layer not editable
图层不可编辑
-
- Use 'Toggle Editing' to make it editable
- 请使用“切换编辑模式”使之可编辑
-
QgsMapToolFeatureAction
@@ -39025,56 +32629,76 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added and filled
-
A problem with geometry type occured
- 发生了一个几何图形类型问题
+
The inserted Ring is not closed
- 插入的环形不是封闭的
+
The inserted Ring is not a valid geometry
- 插入的环形不是有效的几何图形
+
The inserted Ring crosses existing rings
- 插入的环形跟已有的环形相互交叉
+
The inserted Ring is not contained in a feature
- 插入的环形没有包含在要素中
+
An unknown error occured
- 发生了一个未知错误
+
Error, could not add ring
- 错误，无法添加环形
+
QgsMapToolIdentify
+
+ All (%1)
+
+
+ No active layer. To identify features, you must choose an active layer.
+ 没有活动图层。要识别要素，必须选择一个活动图层。
+
+
+ Identifying on %1...
+ 正在%1上识别...
+
+
+ Identifying done.
+ 识别完成。
+
（已点击的坐标）
- No active layer
- 没有活动图层
+ feature id
+ 要素标识码
- To identify features, you must choose an active layer by clicking on its name in the legend
- 要识别要素，必须在图例中点击图层的名称选择一个活动图层
+ new feature
+ 新建要素
Length
长度
-
- Area
- 面积
-
firstX
attributes get sorted; translation for lastX should be lexically larger than this one
第一个横坐标值
-
- All (%1)
-
-
- No active layer. To identify features, you must choose an active layer.
- 没有活动图层。要识别要素，必须选择一个活动图层。
-
firstY
@@ -39131,6 +32742,11 @@ not displayed
lastY
最后一个纵坐标值
+
+ Area
+ 面积
+
Perimeter
@@ -39150,43 +32766,7 @@ not displayed
Identify error
-
-
- Identifying on %1...
- 正在%1上识别...
-
-
- Identifying done.
- 识别完成。
-
-
- No features at this position found.
- 这个位置没有发现要素。
-
-
- WMS layer
- WMS图层
-
-
- Feature info
- 要素信息
-
-
- Raster
- 栅格
-
-
- feature id
- 要素标识码
-
-
- new feature
- 新建要素
+
@@ -39199,14 +32779,6 @@ not displayed
QgsMapToolMoveFeature
-
- Layer not editable
- 图层不可编辑
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- 不能编辑该矢量图层。请点击“切换编辑状态”以使之可编辑。
-
Feature moved
@@ -39215,29 +32787,18 @@ not displayed
QgsMapToolMoveLabel
-
- Label moved
- 移动标签
-
Moved label
移动标签
-
- QgsMapToolMoveVertex
-
- Vertex moved
- 移动顶点
-
-
QgsMapToolNodeTool
could not snap to a segment on the current layer.
-
QgsMapToolReshape
-
- Not a vector layer
- 不是矢量图层
-
-
- The current layer is not a vector layer
- 当前图层不是矢量图层
-
-
- Layer not editable
- 图层不可编辑
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- 不能编辑该矢量图层。请点击“切换编辑状态”以使之可编辑。
-
Coordinate transform error
@@ -39325,10 +32870,6 @@ not displayed
QgsMapToolRotateLabel
-
- Label rotated
- 旋转标签
-
Rotated label
@@ -39363,13 +32904,6 @@ not displayed
旋转符号
-
- QgsMapToolSelect
-
- No active layer
- 没有活动图层
-
-
QgsMapToolShowHideLabels
@@ -39385,6 +32919,11 @@ not displayed
QgsMapToolSimplify
+
+ Geometry simplified
+ 简化几何图形
+
Multipart features are not supported for simplification.
多部件要素不支持简化。
-
- Geometry simplified
- 简化几何图形
-
This feature cannot be simplified. Check if feature has enough vertices to be simplified.
@@ -39409,41 +32943,6 @@ not displayed
QgsMapToolSplitFeatures
-
- Split error
- 分割错误
-
-
- An error occured during feature splitting
- 要素分割过程中发生了一个错误
-
-
- No feature split done
- 未完成要素分割
-
-
- Cannot edit the vector layer. Use 'Toggle Editing' to make it editable.
- 不能编辑该矢量图层。请点击“切换编辑状态”以使之可编辑。
-
-
- If there are selected features, the split tool only applies to the selected ones. If you like to split all features under the split line, clear the selection
- 如果有选中的要素，分割工具仅应用于选中的那些。如果你想将分割线下的全部要素分割，请清除选择
-
-
- Not a vector layer
- 不是矢量图层
-
-
- The current layer is not a vector layer
- 当前图层不是矢量图层
-
-
- Layer not editable
- 图层不可编辑
-
Coordinate transform error
@@ -39462,12 +32961,24 @@ not displayed
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
+
+ No feature split done
+ 未完成要素分割
+
+
+ An error occured during splitting.
+
The geometry is invalid. Please repair before trying to split it.
几何图形无效。尝试分割之前请修复之。
-
- An error occured during splitting.
-
QgsMapToolSplitParts
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
- 几何图形无效。尝试分割之前请修复之。
+
Split error
- 分割错误
-
-
- An error occured during feature splitting
- 要素分割过程中发生了一个错误
-
-
-
- QgsMapToolVertexEdit
-
- Snap tolerance
- 对齐容差
-
-
- Could not snap segment. Have you set the tolerance in Settings > Snapping Options?
- 无法对齐线段。你是否在“设置” → “对齐选项”里设置了容差？
-
-
- Don't show this message again
- 不要再显示此消息
-
-
- Could not snap segment.
- 无法对齐线段。
-
-
- Have you set the tolerance in Settings > Project Properties > General?
- 你是否在“设置” → “项目属性” → “通用”里设置了容差？
+
@@ -39571,199 +33050,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
-
-
- QgsMapserverExportBase
-
- Map file
- 地图文件
-
-
- Map
- 地图
-
-
- Name
- 名称
-
-
- Height
- 高度
-
-
- Width
- 宽度
-
-
- Units
- 单位
-
-
- Image type
- 位图类型
-
-
- Header
- 标题
-
-
- Footer
- 页脚
-
-
- Template
- 模板
-
-
- Name for the map file to be created from the QGIS project file
- 地图文件的名称
-
-
- If checked, only the layer information will be processed
- 如果选中，只有图层信息会处理
-
-
- Path to the MapServer template file
- 地图服务器模板文件的路径
-
-
- Full path to the QGIS project file to export to MapServer map format
- 要导出到地图服务器地图格式的QGIS项目文件的完整路径
-
-
- Browse...
- 浏览...
-
-
- Save As...
- 另存为...
-
-
- Force
- 强制
-
-
- Should text be antialiased? Note that this requires more available colors, decreases drawing performance, and results in slightly larger output images.
- 是否消除文本显示的锯齿？请注意，启用此选项需要更多的可用的颜色，会降低绘图效能，并导致输出稍大的位图。
-
-
- Anti-alias
- 消除锯齿
-
-
- Can text run off the edge of the map?
- 文本是否可以跑出地图边缘？
-
-
- Partials
- 部分
-
-
- Paths
- 路径
-
-
- MapServer url
- 地图服务器网址
-
-
- Forces labels on, regardless of collisions. Available only for cached labels.
- 强制启用标签，不论是否有冲突。仅用于缓存标签。
-
-
- Check to allow MapServer to return data in GML format. Useful when used with WMS GetFeatureInfo operations.
- 勾选后允许地图服务器以GML格式返回数据。与WMS GetFeatureInfo操作一起使用时有用。
-
-
- MapServer Export: Save project to MapFile
- 地图服务器导出：将项目保存到地图文件
-
-
- Use current project
- 使用当前项目
-
-
- LAYER information only
- 仅图层信息
-
-
- Rendering
- 渲染
-
-
- The URL to the mapserver executable.
-
-For example:
-http://my.host.com/cgi-bin/mapserv.exe
- 地图服务器可执行文件的网址。
-
-例：
-http://my.host.com/cgi-bin/mapserv.exe
-
-
- Symbolset
- 符号集
-
-
- Use templates
- 使用模板
-
-
- The file name of the fonts file.
- 字体文件的文件名。
-
-
- Fontset
- 字体集
-
-
- The file name of the symbols file.
- 符号文件的文件名。
-
-
- Layer/label options
- 图层/标签选项
-
-
- meters
- 米
-
-
- dd
- dd
-
-
- feet
- 英尺
-
-
- miles
- 英里
-
-
- inches
- 英寸
-
-
- kilometers
- 公里
+
@@ -39773,14 +33075,14 @@ http://my.host.com/cgi-bin/mapserv.exe
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Offset along line
-
@@ -39815,39 +33117,19 @@ http://my.host.com/cgi-bin/mapserv.exe
Measure
测量
-
- Segments
- 线段
-
-
- Ellipsoidal
- 椭球
-
Total
总计
+
+ Segments
+ 线段
+
QgsMeasureDialog
-
- Segments (in meters)
- 片段（米）
-
-
- Segments (in feet)
- 片段（英尺）
-
-
- Segments (in degrees)
- 片段（度）
-
-
- Segments
- 片段
-
&New
@@ -39876,7 +33158,7 @@ http://my.host.com/cgi-bin/mapserv.exe
Measure (OTF off)
-
Measure (OTF on)
-
Date
- 日期
+
Whole number (smallint - 16bit)
- 整数（16位整型）
+
Whole number (integer - 32bit)
- 整数（32位整型）
+
Whole number (integer - 64bit)
- 整数（64位整型）
+
Decimal number (numeric)
- 十进制数（数字）
+
Decimal number (decimal)
- 十进制数（小数）
+
Decimal number (double)
- 小数（双精度）
+
Text, unlimited length (text)
- 文本，长度不限（text）
+
QgsMergeAttributesDialog
+
+ Skip attribute
+ 跳过属性
+
Id
@@ -39999,19 +33286,15 @@ http://my.host.com/cgi-bin/mapserv.exe
合并
- feature %1
- 要素%1
+ Feature %1
+ 要素%1
Minimum
最小值
-
- Feature %1
- 要素%1
-
Maximum
@@ -40037,11 +33320,6 @@ http://my.host.com/cgi-bin/mapserv.exe
Mean
均值
-
- Skip attribute
- 跳过属性
-
Skipped
@@ -40087,13 +33365,7 @@ http://my.host.com/cgi-bin/mapserv.exe
%n more
unread messages
-
- %n更多
-
-
-
- more
- 更多
+ %n更多
@@ -40153,7 +33425,7 @@ http://my.host.com/cgi-bin/mapserv.exe
Show non-spatial tables
-
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
连接失败——未指定主机名。
@@ -40239,7 +33511,7 @@ http://my.host.com/cgi-bin/mapserv.exe
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
连接失败——未指定数据库名称。
@@ -40441,14 +33713,6 @@ http://my.host.com/cgi-bin/mapserv.exe
&Add
添加(&A)
-
- &Build query
- 构建查询(&B)
-
-
- Build query
- 构建查询
-
&Set Filter
@@ -40760,70 +34024,6 @@ enhancement
Blue band
蓝色波段
-
- Min
- 最小值
-
-
- Max
- 最大值
-
-
- Contrast enhancement
- 对比度增强
-
-
- Min/Max values
- 最大值和最小值
-
-
- Red min
- 红色最小值
-
-
- Red max
- 红色最大值
-
-
- Green min
- 绿色最小值
-
-
- Green max
- 绿色最大值
-
-
- Blue min
- 蓝色最小值
-
-
- Blue max
- 蓝色最大值
-
-
- Load min-/max values
- 载入最大值和最小值
-
-
- Estimate (faster)
- 估计（较快）
-
-
- Actual (slower)
- 实际（较慢）
-
-
- CurrentExtent
- 当前范围
-
-
- Use standard deviation
- 使用标准偏差
-
-
- Load
- 载入
-
QgsNetworkAccessManager
@@ -40856,27 +34056,27 @@ enhancement
all
- 全部
+
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
QgsNewHttpConnectionBase
- Name
- 名称
+ Create a new WMS connection
+ 创建一个新的WFS连接
+
+
+ Connection details
+ 连接详情
+
+
+ DPI-Mode
+
URL
网址
-
- DPI-Mode
-
If the service requires basic authentication, enter a user name and optional password
如果服务需要基本身份验证，输入用户名和可选密码
+
+ Password
+ 密码
+
+
+ &User name
+ 用户名(&U)
+
+
+ Name
+ 名称
+
Name of the new connection
@@ -40951,11 +34171,7 @@ Note: giving the password is optional. It will be requested interactivly, when n
Ignore GetMap/GetTile URI reported in capabilities
-
-
- Ignore GetMap URI reported in capabilities
- 在功能中忽略报告的GeMap URI
+
Referer
参考
-
- Create a new WMS connection
- 创建一个新的WFS连接
-
-
- Connection details
- 连接详情
-
-
- Password
- 密码
-
-
- &User name
- 用户名(&U)
-
QgsNewOgrConnection
@@ -41050,16 +34246,16 @@ Extended error information:
Type
类型
-
- Save Password
- 保存密码
-
Name
名称
+
+ Name of the new connection
+ 新连接的名称
+
Host
@@ -41086,9 +34282,9 @@ Extended error information:
密码
- Name of the new connection
- 新连接的名称
+ Save Password
+ 保存密码
Multipolygon
多边形集
-
- Specify CRS
- 指定坐标参照系
-
-
- Remove attribute
- 移除属性
-
Spatial Reference Id
@@ -41309,6 +34495,11 @@ Extended error information:
Specify the coordinate reference system of the layer's geometry.
为图层的几何图形指定坐标参照系。
+
+ Specify CRS
+ 指定坐标参照系
+
Add an integer id field as the primary key for the new layer
@@ -41335,11 +34526,6 @@ Extended error information:
An attribute name
一个属性名
-
- Attributes list
- 属性列表
-
Add attribute to list
@@ -41350,11 +34536,21 @@ Extended error information:
Add to attributes list
添加到属性列表
+
+ Attributes list
+ 属性列表
+
Delete selected attribute
删除选中的属性
+
+ Remove attribute
+ 移除属性
+
QgsNewVectorLayerDialog
@@ -41402,11 +34598,7 @@ Extended error information:
Save layer as...
- 图层另存为...
-
-
- Save As
- 另存为
+
@@ -41505,118 +34697,7 @@ Extended error information:
File encoding
-
-
-
- QgsNorthArrowPlugin
-
- Bottom Left
- 左下
-
-
- Top Right
- 右上
-
-
- Bottom Right
- 右下
-
-
- &Decorations
- 装饰 (&D)
-
-
- Creates a north arrow that is displayed on the map canvas
- 在地图视图中创建一个罗盘
-
-
- Top Left
- 左上
-
-
-
- QgsNorthArrowPluginGuiBase
-
- North Arrow Plugin
- 罗盘插件
-
-
- Angle
- 角度
-
-
- Placement
- 位置
-
-
- Set direction automatically
- 自动设置方向
-
-
- Enable North Arrow
- 显示罗盘
-
-
- Top Left
- 左上
-
-
- Top Right
- 右上
-
-
- Bottom Left
- 左下
-
-
- Bottom Right
- 右下
-
-
- Placement on screen
- 屏幕位置
-
-
- Preview of north arrow
- 预览
-
-
-
- QgsOGRSublayersDialog
-
- Layer ID
- 图层标识符
-
-
- Layer name
- 图层名称
-
-
- Nb of features
- 要素数目
-
-
- Geometry type
- 几何图形类型
-
-
-
- QgsOGRSublayersDialogBase
-
- Select layers to load
- 选择要载入的图层
-
-
- 1
- 1
-
-
-
- QgsOSMDataProvider
-
- Open Street Map format
- 开放街道图格式
+
@@ -41696,12 +34777,12 @@ Extended error information:
Could not transform canvas extent.
-
Could not transform layer extent.
-
Export has been successful.
导出成功。
-
- OpenStreetMap import
- 导入开放街道图
-
Failed to export OSM data:
@@ -41927,6 +35004,11 @@ Extended error information:
QgsOWSSourceSelect
+
+ Add Layer(s) from a %1 Server
+
&Add
@@ -41957,23 +35039,6 @@ Extended error information:
Always network
常用网络
-
- Server format
- 服务器格式
-
-
- is supported by GDAL %1 driver.
- 由GDAL %1驱动支持。
-
-
- is not supported by GDAL
- 不被GDAL支持
-
-
- Add Layer(s) from a %1 Server
-
Are you sure you want to remove the %1 connection and all associated settings?
@@ -41998,9 +35063,7 @@ Extended error information:
Coordinate Reference System (%n available)
crs count
-
- 坐标参照系（%n个可用）
-
+ 坐标参照系（%n个可用）
network error: %1
网络错误：%1
-
- The %1 connection already exists. Do you want to overwrite it?
- 连接%1已经存在。是否要覆盖已存在的连接？
-
-
- Confirm Overwrite
- 确认覆盖
-
QgsOWSSourceSelectBase
@@ -42147,6 +35202,11 @@ Extended error information:
Selected Coordinate Reference System
选择坐标参照系
+
+ Change ...
+ 更改...
+
Feature limit for GetFeatureInfo
GetFeatureInfo的要素限制
-
- Coordinate Reference System
- 坐标参照系
-
-
- Change ...
- 更改...
-
Cache
@@ -42516,10 +35567,9 @@ Always network: always load from network and do not check if the cache has a val
QgsOgrProvider
- Data source is invalid (%1)
- 数据源无效（%1）
+ Data source is invalid, no layer found (%1)
+ 数据源无效，未找到任何图层（%1）
OGR
- Data source is invalid, no layer found (%1)
- 数据源无效，未找到任何图层（%1）
+ Data source is invalid (%1)
+ 数据源无效（%1）
Unknown
未知
-
- Read attempt on an invalid OGR data source
- 尝试读取一个无效的OGR数据源
-
OGR error creating wkb for feature %1: %2
@@ -42694,6 +35741,27 @@ Always network: always load from network and do not check if the cache has a val
QgsOpenRasterDialog
+
+ Open raster
+ 打开栅格
+
+
+ Raster file:
+ 栅格文件:
+
+
+ ...
+ ...
+
+
+ Save raster as:
+ 栅格另存为：
+
Choose a name of the raster
@@ -42722,27 +35790,6 @@ Always network: always load from network and do not check if the cache has a val
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
- 已更改
-
- Open raster
- 打开栅格
-
-
- Raster file:
- 栅格文件:
-
-
- ...
- ...
-
-
- Save raster as:
- 栅格另存为：
-
QgsOpenVectorLayerDialog
@@ -42899,10 +35946,6 @@ Always network: always load from network and do not check if the cache has a val
Options Dialog Template
选项对话框模板
-
- Section
- 章节
-
GroupBox
@@ -42912,41 +35955,19 @@ Always network: always load from network and do not check if the cache has a val
QgsOptions
- Semi transparent circle
- 半透明圆圈
+ Identify highlight color
+
- Cross
- 十字
+ not present
+ 不预先考虑
- Detected active locale on your system: %1
- 检测到系统当前的语言为：%1
-
-
- None
- 无
-
-
- map units
- 地图单位
-
-
- None / Planimetric
- 无/平面的
+ System value: %1
+ 系统值：%1
Show selected features
显示选中的要素
-
- Show features in current canvas
- 显示当前视图中的要素
-
Always
@@ -43007,10 +36024,6 @@ Always network: always load from network and do not check if the cache has a val
Full scan
深度扫描
-
- All
- 所有
-
Select grid color
- 选择网格颜色
+
Solid
- 实线
+
Dots
- 虚线（点）
+
Crosses
- 十字
+
- QGIS files
- QGIS文件
-
-
- Create Options - %1 Driver
- 创建选项——%1驱动
-
-
- Create Options - pyramids
- 创建选项——金字塔
-
-
- Restore UI defaults
-
-
- Are you sure to reset the UI to default (needs restart)?
-
-
- No Stretch
- 不延伸
-
-
- Stretch To MinMax
- 延伸至最大最小值
-
-
- Stretch And Clip To MinMax
- 延伸并裁剪至最大最小值
-
-
- Clip To MinMax
- 裁剪到最大最小值
-
-
- pixels
- 像素
+ Detected active locale on your system: %1
+ 检测到系统当前的语言为：%1
Off
- 关闭
-
-
- QGIS
- QGIS
-
-
- GEOS
- GEOS
-
-
- Round
- 圆角
-
-
- Mitre
- 尖角
-
-
- Bevel
- 斜角
-
-
- Central point (fastest)
- 中心点（最快）
-
-
- Choose project file to open at launch
- 选择一个启动时打开的项目文件
-
-
- QGis files
- QGIS文件
-
-
- Overwrite
- 覆盖
-
-
- If Undefined
- 若未定义
-
-
- Unset
- 未设置
-
-
- Prepend
- 预先考虑
-
-
- Append
- 追加
-
-
- Enter scale
- 输入比例尺
-
-
- Scale denominator
- 比例尺分母
-
-
- Load scales
- 载入比例尺
-
-
- XML files (*.xml *.XML)
- XML文件(*.xml *.XML)
-
-
- Save scales
- 保存比例尺
-
-
- Current layer
- 当前图层
-
-
- Top down, stop at first
- 从上往下，止于第一个
-
-
- Top down
- 从上往下
-
-
- Identify highlight color
-
-
- not present
- 不预先考虑
-
-
- System value: %1
- 系统值：%1
-
-
- Show features visible on map
- 显示地图上可见的要素
-
-
- To vertex
到顶点
- To segment
到线段
- To vertex and segment
到顶点及线段
- map units
+ 地图单位
+
+
+ pixels
+ 像素
+
+
+ Semi transparent circle
+ 半透明圆圈
+
+
+ Cross
+ 十字
+
+
+ None
+ 无
+
+
+ QGIS files
+ QGIS文件
+
+
+ Off
+ 关闭
+
+
+ QGIS
+ QGIS
+
+
+ GEOS
+ GEOS
+
+
+ Round
+ 圆角
+
+
+ Mitre
+ 尖角
+
+
+ Bevel
+ 斜角
+
+
+ Save default project
保存默认项目
- You must set a default project
必须设置一个默认项目
- Current project saved as default
当前项目保存为默认项目
- Error saving current project as default
将当前项目保存为默认项目时出错
- Choose a directory to store project template files
选择一个目录以存储模板文件
@@ -43276,143 +36185,174 @@ Always network: always load from network and do not check if the cache has a val
选区颜色
- Show features visible on map
+ 显示地图上可见的要素
+
+
+ Choose project file to open at launch
+ 选择一个启动时打开的项目文件
+
+
+ Create Options - %1 Driver
+ 创建选项——%1驱动
+
+
+ Create Options - pyramids
+ 创建选项——金字塔
+
+
+ Restore UI defaults
+
+
+ Are you sure to reset the UI to default (needs restart)?
+
+
+ Overwrite
+ 覆盖
+
+
+ If Undefined
+ 若未定义
+
+
+ Unset
+ 未设置
+
+
+ Prepend
+ 预先考虑
+
+
+ Append
+ 追加
+
+
+ Choose a directory
选择一个目录
+
+ Enter scale
+ 输入比例尺
+
+
+ Scale denominator
+ 比例尺分母
+
+
+ Load scales
+ 载入比例尺
+
+
+ XML files (*.xml *.XML)
+ XML文件(*.xml *.XML)
+
+
+ Save scales
+ 保存比例尺
+
+
+ No Stretch
+ 不延伸
+
+
+ Stretch To MinMax
+ 延伸至最大最小值
+
+
+ Stretch And Clip To MinMax
+ 延伸并裁剪至最大最小值
+
+
+ Clip To MinMax
+ 裁剪到最大最小值
+
+
+ None / Planimetric
+ 无/平面的
+
QgsOptionsBase
- Hide splash screen at startup
- 启动时隐藏飞溅屏幕
+ Options
+ 选项
- Map display will be updated (drawn) after this many features have been read from the data source
- 从数据源中读取这么多要素后，地图显示会被更新
+ General
+ 通用
- ...
- ...
+ System
+ 系统
- Select Global Default ...
- 选择全局默认值...
+ Data Sources
+ 数据源
- Make lines appear less jagged at the expense of some drawing performance
- 牺牲绘制效率使线的显示更光滑
+ Data sources
+ 数据源
- By default new la&yers added to the map should be displayed
- 默认情况下添加到地图的新图层将会显示 (&y)
+ Rendering
+ 渲染
- Measure tool
- 测量工具
+ Canvas & Legend
+ 视图和图例
- Fix problems with incorrectly filled polygons
- 修正多边形未正确填充的问题
+ Canvas and legend
+ 视图和图例
- %
- %
+ Map Tools
+ 地图工具
- Panning and zooming
- 平移和缩放
-
-
- Zoom
- 缩放
-
-
- Zoom and recenter
- 缩放并居中
-
-
- Nothing
- 无
-
-
- px
- 像素
-
-
- Prompt for &CRS
- 提示选择坐标参照系(&C)
-
-
- Use &project CRS
- 使用项目的坐标参照系(&P)
-
-
- Use default CRS displa&yed below
- 默认使用以下坐标参照系(&Y)
-
-
- Locale
- 语言
-
-
- Locale to use instead
- 设置语言及区域为
-
-
- Additional Info
- 附加信息
-
-
- Detected active locale on your system:
- 检测到系统当前的语言及区域设置为：
-
-
- Rubberband
- 橡皮圈
-
-
- Line width in pixels
- 线条宽度（像素）
-
-
- Snapping
- 对齐
-
-
- Zoom to mouse cursor
- 缩放到鼠标指针位置
+ Map tools
+ 地图工具
数字化
- Project files
- 项目文件
+ GDAL
+ GDAL
- Prompt to save project changes when required
- 当项目文件有更改时提醒保存
+ CRS
+ 坐标参照系
- Warn when opening a project file saved with an older version of QGIS
- 当打开旧版格式的QGIS项目文件时提出警告
+ Locale
+ 语言
- Enable macros
- 是否启用宏
+ Network
+ 网络
- Never
- 从不
+ Application
+ 应用程序
- Ask
- 询问
-
-
- For this session only
- 仅在该会话中
-
-
- Always (not recommended)
- 总是（不建议）
-
-
- Default Map Appearance (overridden by project properties)
- 默认的地图外观(项目属性会取代此默认设定)
-
-
- Selection color
- 选区颜色
-
-
- Background color
- 背景颜色
+ Style <i>(QGIS restart required)</i>
+ 样式<i>(需要重启QGIS更改才能生效)</i>
Icon size
图标大小
+
+ 16
+ 16
+
+
+ 24
+ 24
+
+
+ 32
+ 32
+
Font
@@ -43494,46 +36430,24 @@ Always network: always load from network and do not check if the cache has a val
Qt默认
- Map update interval
- Size
+ 大小
- ms
- Timeout for timed messages or dialogs
+ 限时消息或限时窗口的超时时间
- Enable feature simplification by default for newly added layers
- s
+ 秒
- Double click action in legend
- 双击图例时
-
-
- Open layer properties
- 打开图层属性对话框
-
-
- Open attribute table
- 打开属性表
-
-
- Capitalise layer names in legend
- 图例中的图层名称大写
-
-
- Display classification attribute names in legend
- 在图例中显示类别属性名称
-
-
- Create raster icons in legend
- 在图例中创建栅格图标
+ Hide splash screen at startup
+ 启动时隐藏飞溅屏幕
启动时显示技巧窗口
- Open snapping options in a dock window (QGIS restart required)
- 在停靠区窗口打开对齐选项（重启QGIS软件才能生效）
+ Bold group box titles
+ 组框标题使用粗体
- Open attribute table in a dock window (QGIS restart required)
- 在停靠区窗口打开属性表（重启QGIS软件才能生效）
+ QGIS-styled group boxes
+ QGIS风格的组框
- Ignore shapefile encoding
- 忽略shape文件编码
+ Project files
+ 项目文件
- Attribute table behaviour
- 属性表行为
+ New
+ 新建
- Representation for NULL values
- 空值表示为
+ Most recent
+ 最近
- Edit Pyramids Options
- 编辑金字塔选项
+ Specific
+ 特定
- Edit Create Options
- 编辑创建选项
+ ...
+ ...
- Plugin paths
- 插件路径
-
-
- Path(s) to search for additional C++ plugins libraries
- 附加C++插件库的搜索路径
-
-
- Rendering
- 渲染
-
-
- Rendering behavior
- 渲染行为
-
-
- Number of features to draw before updating the display
- 更新显示之前要绘制的要素数目
-
-
- Default expiration period for WMS-C/WMTS tiles (hours)
- WMS-C/WMTS块的默认过期时间（小时）
-
-
- <b>Note:</b> Use zero to prevent display updates until all features have been rendered
- <b>注意：</b>设置为0可在全部要素渲染完毕之前防止显示更新
+ Open project on launch
+ 打开项目，当启动
重置
- Style <i>(QGIS restart required)</i>
- 样式<i>(需要重启QGIS更改才能生效)</i>
+ Prompt to save project and data source changes when required
+ 需要时提示保存项目和更新的数据
- 16
- 16
+ Prompt for confirmation when a layer is to be removed
+
- 24
- 24
+ Warn when opening a project file saved with an older version of QGIS
+ 当打开旧版格式的QGIS项目文件时提出警告
- 32
- 32
+ Enable macros
+ 是否启用宏
- Menu size
- 菜单大小
+ Never
+ 从不
- Add new layers to selected or current group
- 将新图层添加到选中的组或当前组
+ Ask
+ 询问
+
+
+ For this session only
+ 仅在该会话中
+
+
+ Always (not recommended)
+ 总是（不建议）
+
+
+ QSettings
+
+
+ Reset the User Interface settings, to reset QGIS to it's default view
+
+
+ Environment
+ 环境
+
+
+ Apply
+ 应用
+
+
+ Variable
+ 变量
+
+
+ Value
+ 值
+
+
+ Remove
+ 移除
+
+
+ Add
+ 添加
+
+
+ Current environment variables (read-only - bold indicates modified at startup)
+ 当前环境变量（只读，启动时更新的变量显示为粗体）
+
+
+ Show only QGIS-specific variables
+ 仅显示QGIS特殊变量
+
+
+ Use custom variables (restart required - include separators)
+ 使用自定义变量（重启QGIS软件才能生效——包括分隔符）
+
+
+ Plugin paths
+ 插件路径
+
+
+ Path(s) to search for additional C++ plugins libraries
+ 附加C++插件库的搜索路径
+
+
+ SVG paths
+ SVG路径
+
+
+ Path(s) to search for Scalable Vector Graphic (SVG) symbols
+ 可伸缩矢量图形（SVG）符号的搜索路径
+
+
+ Feature attributes and table
+ 要素属性和表格
+
+
+ Open attribute table in a dock window (QGIS restart required)
+ 在停靠区窗口打开属性表（重启QGIS软件才能生效）
Copy geometry in WKT representation from attribute table
从属性表中复制几何图形时使用WKT表示法
+
+ Attribute table behaviour
+ 属性表行为
+
Attribute table row cache
属性表的行缓存
- Prompt for raster sublayers
- 提示栅格的子图层
+ Representation for NULL values
+ 空值表示为
+
+
+ Data source handling
+ 数据源处理
在浏览器停靠区扫描压缩文件（.zip）的内容
- GDAL
- GDAL
+ Prompt for raster sublayers when opening
+ 打开时提示栅格的子图层
- GDAL Drivers
- GDAL驱动
+ Add PostGIS layers with double click and select in extended mode
+ 双击添加PostGIS图层并以扩展模式选中它
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
- 在某些情况下，栅格格式可用多个GDAL驱动来载入。用以下列表指定要使用哪一个。
+ Rendering behavior
+ 渲染行为
- Name
- 名称
+ By default new la&yers added to the map should be displayed
+ 默认情况下添加到地图的新图层将会显示 (&y)
- ext
- 扩展名
+ Use render caching where possible to speed up redraws
+ 在可能的情况下使用渲染缓存以加速图形重绘
- Flags
- 标志
+ Render layers in parallel using many CPU cores
+
- Description
- 描述
+ Max cores to use:
+
- Plugins
- 插件
+ Maximum scale at which the layer should be simplified (1:1 always simplifies):
+
Rendering quality
渲染质量
+
+ Make lines appear less jagged at the expense of some drawing performance
+ 牺牲绘制效率使线的显示更光滑
+
Rasters
@@ -43759,81 +36774,16 @@ Always network: always load from network and do not check if the cache has a val
Blue band
蓝色波段
-
- Use standard deviation
- 使用标准偏差
-
Contrast enhancement
对比度增强
-
- Preferred angle units
- 首选的角度单位
-
-
- Degrees
- 度
-
-
- Radians
- 弧度
-
-
- Gon
- 格
-
-
- Decimal places
- 小数位数
-
-
- Keep base unit
- 保持基本单位
-
-
- Zoom factor
- 缩放系数
-
Single band gray
单波段灰度
-
- <b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
-
- Simplification threshold (higher values result in more simplification):
-
-
- Higher values result in more simplification
-
-
- Simplify on provider side if possible
-
-
- Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
Multi band color (byte / band)
@@ -43859,331 +36809,16 @@ Always network: always load from network and do not check if the cache has a val
-
-
+
+ %
+ %
+
Standard deviation multiplier
标准偏差乘数
-
- WMS getLegendGraphic Resolution
-
-
- Mouse wheel action
- 鼠标滚轮动作
-
-
- Predefined scales
- 预定义比例尺
-
-
- Overlays
- 叠层
-
-
- Placement algorithm
- 布局算法
-
-
- Other settings
- 其他设置
-
-
- Reuse last entered attribute values
- 重用最后输入的属性值
-
-
- Validate geometries
- 检验几何图形
-
-
- Miter limit for curve offset
- 曲线偏移的斜接限制
-
-
- Default Coordinate Reference System for new projects
- 新建项目的默认坐标参照系
-
-
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
- 若新加入的图层的坐标参照系跟既有图层的坐标参照系不同，则自动启用“动态投影”，套用既有图层的坐标参照系。
-
-
- Enable 'on the &fly' reprojection by default
- 默认启用动态（on the fly）投影(&F)
-
-
- Select...
- 选择...
-
-
- Always start new projects with this CRS
- 总是以此坐标参照系打开新项目
-
-
- Coordinate Reference System for new layers
- 新建图层的默认坐标参照系
-
-
- When a new layer is created, or when a layer is loaded that has no Coordinate Reference System (CRS)
- 新建或载入没有坐标参照系的图层时
-
-
- Network
- 网络
-
-
- Exclude URLs (starting with)
- 不包含以下网址（及以以下网址起始的网址）
-
-
- Cache settings
- 缓存设置
-
-
- Directory
- 目录
-
-
- Size
- 大小
-
-
- Clear
- 清除
-
-
- WMS search address
- WMS搜索地址
-
-
- Timeout for network requests (ms)
- 网络请求超时（毫秒）
-
-
- Rubberband color
- 橡皮圈颜色
-
-
- Ellipsoid for distance calculations
- 距离计算所使用的椭球面
-
-
- <b>Note:</b> Specify the search radius as a percentage of the map width
- <b>注意：</b>指定的搜索半径是地图宽度的百分比
-
-
- Application
- 应用程序
-
-
- System
- 系统
-
-
- Data Sources
- 数据源
-
-
- Data sources
- 数据源
-
-
- Canvas & Legend
- 视图和图例
-
-
- Canvas and legend
- 视图和图例
-
-
- Map Tools
- 地图工具
-
-
- Composer
- 版式
-
-
- Timeout for timed messages or dialogs
- 限时消息或限时窗口的超时时间
-
-
- s
- 秒
-
-
- Bold group box titles
- 组框标题使用粗体
-
-
- QGIS-styled group boxes
- QGIS风格的组框
-
-
- Custom side bar style
-
-
- Use live-updating color chooser dialogs
- 使用实时更新的颜色选择器对话框
-
-
- New
- 新建
-
-
- Most recent
- 最近
-
-
- Specific
- 特定
-
-
- Open project on launch
- 打开项目，当启动
-
-
- Prompt to save project and data source changes when required
- 需要时提示保存项目和更新的数据
-
-
- Prompt for confirmation when a layer is to be removed
-
-
- QSettings
-
-
- Reset the User Interface settings, to reset QGIS to it's default view
-
-
- Environment
- 环境
-
-
- Apply
- 应用
-
-
- Variable
- 变量
-
-
- Value
- 值
-
-
- Current environment variables (read-only - bold indicates modified at startup)
- 当前环境变量（只读，启动时更新的变量显示为粗体）
-
-
- Show only QGIS-specific variables
- 仅显示QGIS特殊变量
-
-
- Use custom variables (restart required - include separators)
- 使用自定义变量（重启QGIS软件才能生效——包括分隔符）
-
-
- Feature attributes and table
- 要素属性和表格
-
-
- Data source handling
- 数据源处理
-
-
- Prompt for raster sublayers when opening
- 打开时提示栅格的子图层
-
-
- Ignore shapefile encoding declaration
- 忽略shape文件编码声明
-
-
- Disable OGR on-the-fly conversion from declared encoding to UTF-8
- 禁用OGR将声明的编码动态转换为UTF-8
-
-
- Add Oracle layers with double click and select in extended mode
- 双击添加Oracle图层并以扩展模式选中它
-
-
- Better graphics performance at the cost of loosing the possibility to cancel rendering and incremental feature drawing
- 以牺牲放弃渲染及递增要素绘制的可能性为代价来提高图形性能
-
-
- Enable back buffer
- 启用后台缓冲
-
-
- <b>Note:</b> Set below 1000 to prevent display updates until all features have been rendered
- <b>注意:</b> 设置低于1000的值以避免视图在所有的图层描绘完毕完成前刷新
-
Debugging
@@ -44199,20 +36834,127 @@ Always network: always load from network and do not check if the cache has a val
Map canvas refresh
地图视图刷新
-
- Map canvas & legend
- 地图视图和图例
-
Default map appearance (overridden by project properties)
默认的地图外观（项目属性会取代此默认设定）
+
+ Selection color
+ 选区颜色
+
+
+ Highlight color
+
+
+ <html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
+
+
+ Buffer
+
+
+ Lines / outlines buffer in millimeters.
+
+
+ Minimum width
+
+
+ Minimum line / outline width in millimeters.
+
+
+ Suppress attribute form pop-up after feature creation
+
+
+ Background color
+ 背景颜色
+
+
+ Use live-updating color chooser dialogs
+ 使用实时更新的颜色选择器对话框
+
+
+ Ignore shapefile encoding declaration
+ 忽略shape文件编码声明
+
+
+ Disable OGR on-the-fly conversion from declared encoding to UTF-8
+ 禁用OGR将声明的编码动态转换为UTF-8
+
+
+ Composer
+
+
+ Custom side bar style
+
+
+ Add Oracle layers with double click and select in extended mode
+ 双击添加Oracle图层并以扩展模式选中它
+
+
+ <b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
+
+
+ Simplification threshold (higher values result in more simplification):
+
+
+ Higher values result in more simplification
+
+
+ Simplify on provider side if possible
+
Layer legend
图层图例
+
+ Double click action in legend
+ 双击图例时
+
+
+ Open layer properties
+ 打开图层属性对话框
+
+
+ Open attribute table
+ 打开属性表
+
Capitalise layer names
@@ -44244,18 +36986,140 @@ Always network: always load from network and do not check if the cache has a val
图例条目样式
- Overlay position
- 叠层位置
+ WMS getLegendGraphic Resolution
+
+
+ Identify
+ 识别要素
+
+
+ <b>Note:</b> Specify the search radius as a percentage of the map width
+ <b>注意：</b>指定的搜索半径是地图宽度的百分比
Search radius for identifying features and displaying map tips
识别要素和显示地图提示的搜索半径
+
+ Measure tool
+ 测量工具
+
+
+ Rubberband color
+ 橡皮圈颜色
+
+
+ Preferred measurements units
+ 首选的测量单位
+
+
+ Meters
+ 米
+
+
+ Feet
+ 英尺
+
Nautical Miles
-
+
+ Preferred angle units
+ 首选的角度单位
+
+
+ Degrees
+ 度
+
+
+ Map update interval
+
+
+ ms
+
+
+ Enable feature simplification by default for newly added layers
+
+
+ Radians
+ 弧度
+
+
+ Decimal places
+ 小数位数
+
+
+ Keep base unit
+ 保持基本单位
+
+
+ Gon
+ 格
+
+
+ Panning and zooming
+ 平移和缩放
+
+
+ Zoom factor
+ 缩放系数
+
+
+ Mouse wheel action
+ 鼠标滚轮动作
+
+
+ Zoom
+ 缩放
+
+
+ Zoom and recenter
+ 缩放并居中
+
+
+ Zoom to mouse cursor
+ 缩放到鼠标指针位置
+
+
+ Nothing
+ 无
+
+
+ Predefined scales
+ 预定义比例尺
Composition defaults
-
Default font
-
Grid appearance
-
Grid style
- 网格类型
+
Color...
- 颜色...
+
+ Grid defaults
+
+
+ Spacing
- 间距
+
mm
-
-
- Render layers in parallel using many CPU cores
-
-
- Max cores to use:
-
-
- Highlight color
-
-
- <html><head/><body><p>The color used to highlight identified feature. The alpha channel is only used for polygons fill, lines and outlines are fully opaque.</p></body></html>
-
-
- Buffer
-
-
- Lines / outlines buffer in millimeters.
-
-
- Minimum width
-
-
- Minimum line / outline width in millimeters.
-
-
- Grid and guide defaults
-
-
- Grid spacing
-
Grid offset
- 网格偏移
+
x:
- 横坐标：
+
y:
- 纵坐标：
+
Snap tolerance
- 对齐容差
+
- Guide defaults
+
+
+ Feature creation
创建要素
- Suppress attribute form pop-up after feature creation
- Validate geometries
+ 检验几何图形
- Reuse last entered attribute values
+ 重用最后输入的属性值
+
+
+ Rubberband
+ 橡皮圈
+
+
+ Line color
+ 线条颜色
+
+
+ Line width in pixels
+ 线条宽度（像素）
+
+
+ Line width
线条宽度
- Snapping
+ 对齐
+
+
+ Default snap mode
默认对齐模式
- Open snapping options in a dock window (QGIS restart required)
- 在停靠窗口中打开对齐选项（重启QGIS软件才能生效）
+ Default snapping tolerance
+ 默认对齐容差
- Vertex markers
- 顶点标记
+ Search radius for vertex edits
+ 顶点编辑的搜索半径
- Marker style
- 标记的样式
-
-
- Curve offset tool
- 曲线偏移工具
-
-
- Miter limit
- 斜接限制
-
-
- Join style
- 连接样式
-
-
- Quadrant segments
- 相限区段
-
-
- GDAL driver options
- GDAL驱动选项
-
-
- GDAL drivers
- GDAL驱动
-
-
- Coordinate Reference System (CRS)
- 坐标参照系
-
-
- CRS for new layers
- 新图层的坐标参照系
-
-
- When a new layer is created, or when a layer is loaded that has no CRS
- 新建或载入没有坐标参照系的图层时
-
-
- Default CRS for new projects
- 新项目的默认坐标参照系
-
-
- Automatically enable 'on the fly' reprojection if layers have different CRS
- 新加入的图层坐标参照系与既有图层坐标参照系不同时自动启用动态投影
-
-
- Don't enable 'on the fly' reprojection
-
-
- Default datum transformations
-
-
- Source CRS
-
-
- Destination CRS
-
-
- Source datum transform
-
-
- Destination datum transform
-
-
- Ask for datum transformation when no default is defined
-
-
- Override system locale
- 覆盖系统的语言环境
-
-
- <b>Note:</b> Enabling / changing overide on local requires an application restart
- <b>注意：</b>启用或更改对系统语言与区域的覆盖设置需要重启QGIS软件才能生效
-
-
- Max retry in case of tile request errors
-
-
- User-Agent
-
-
- Size [KiB]
-
-
- Use proxy for web access
- 连网时使用代理
-
-
- Host
- 主机
-
-
- Port
- 端口
-
-
- User
- 用户名
-
-
- Leave this blank if no proxy username / password are required
- 若代理不要求用户名或密码，请留空
-
-
- Password
- 密码
-
-
- CRS
- 坐标参照系
-
-
- Suppress attributes pop-up windows after each created feature
- 禁止每个要素创建后的弹出属性窗口
-
-
- Proxy type
- 代理类型
-
-
- Add
- 添加
-
-
- Remove
- 移除
-
-
- Position
- 位置
-
-
- map units
地图单位
pixels
像素
- Show markers only for selected features
- 仅为选中的要素显示标记
+ Open snapping options in a dock window (QGIS restart required)
+ 在停靠窗口中打开对齐选项（重启QGIS软件才能生效）
- Add PostGIS layers with double click and select in extended mode
- 双击添加PostGIS图层并以扩展模式选中它
+ Vertex markers
+ 顶点标记
- Preferred measurements units
- 首选的测量单位
+ Marker style
+ 标记的样式
- Meters
- 米
-
-
- Feet
- 英尺
-
-
- Identify
- 识别要素
-
-
- Mode
- 模式
-
-
- Open identify results in a dock window (QGIS restart required)
- 在停靠区窗口打开识别结果（重启QGIS软件才能生效）
-
-
- Marker size
标记的大小
- Default snapping tolerance
- 默认对齐容差
+ Show markers only for selected features
+ 仅为选中的要素显示标记
- Search radius for vertex edits
- 顶点编辑的搜索半径
+ Curve offset tool
+ 曲线偏移工具
- Options
- 选项
+ Miter limit
+ 斜接限制
- Use render caching where possible to speed up redraws
- 在可能的情况下使用渲染缓存以加速图形重绘
+ Join style
+ 连接样式
- SVG paths
- SVG路径
+ Quadrant segments
+ 相限区段
- Path(s) to search for Scalable Vector Graphic (SVG) symbols
- 可伸缩矢量图形（SVG）符号的搜索路径
+ GDAL driver options
+ GDAL驱动选项
- Compatibility
- 兼容性
+ Edit Pyramids Options
+ 编辑金字塔选项
- Use new generation symbology for rendering
- 使用新一代的符号来渲染
+ Edit Create Options
+ 编辑创建选项
- Open feature form, if a single feature is identified
- 当选中一个要素时打开要素窗体
+ GDAL drivers
+ GDAL驱动
- Line color
- 线条颜色
+ In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
+ 在某些情况下，栅格格式可用多个GDAL驱动来载入。用以下列表指定要使用哪一个。
- General
- 通用
+ Name
+ 名称
- Map tools
- 地图工具
+ ext
+ 扩展名
+
+
+ Flags
+ 标志
+
+
+ Description
+ 描述
+
+
+ CRS for new layers
+ 新图层的坐标参照系
+
+
+ Select...
+ 选择...
+
+
+ Use &project CRS
+ 使用项目的坐标参照系(&P)
+
+
+ Prompt for &CRS
+ 提示选择坐标参照系(&C)
+
+
+ Use default CRS displa&yed below
+ 默认使用以下坐标参照系(&Y)
+
+
+ When a new layer is created, or when a layer is loaded that has no CRS
+ 新建或载入没有坐标参照系的图层时
+
+
+ Default CRS for new projects
+ 新项目的默认坐标参照系
+
+
+ Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
+ 若新加入的图层的坐标参照系跟既有图层的坐标参照系不同，则自动启用“动态投影”，套用既有图层的坐标参照系。
+
+
+ Automatically enable 'on the fly' reprojection if layers have different CRS
+ 新加入的图层坐标参照系与既有图层坐标参照系不同时自动启用动态投影
+
+
+ Always start new projects with this CRS
+ 总是以此坐标参照系打开新项目
+
+
+ Enable 'on the &fly' reprojection by default
+ 默认启用动态（on the fly）投影(&F)
+
+
+ Don't enable 'on the fly' reprojection
+
+
+ Default datum transformations
+
+
+ Source CRS
+
+
+ Destination CRS
+
+
+ Source datum transform
+
+
+ Destination datum transform
+
+
+ Ask for datum transformation when no default is defined
+
+
+ Override system locale
+ 覆盖系统的语言环境
+
+
+ Locale to use instead
+ 设置语言及区域为
+
+
+ <b>Note:</b> Enabling / changing overide on local requires an application restart
+ <b>注意：</b>启用或更改对系统语言与区域的覆盖设置需要重启QGIS软件才能生效
+
+
+ Additional Info
+ 附加信息
+
+
+ Detected active locale on your system:
+ 检测到系统当前的语言及区域设置为：
+
+
+ WMS search address
+ WMS搜索地址
+
+
+ Timeout for network requests (ms)
+ 网络请求超时（毫秒）
+
+
+ Default expiration period for WMS-C/WMTS tiles (hours)
+ WMS-C/WMTS块的默认过期时间（小时）
+
+
+ Max retry in case of tile request errors
+
+
+ User-Agent
+
+
+ Cache settings
+ 缓存设置
+
+
+ Directory
+ 目录
+
+
+ Size [KiB]
+
+
+ Clear
+ 清除
+
+
+ Use proxy for web access
+ 连网时使用代理
+
+
+ Host
+ 主机
+
+
+ Port
+ 端口
+
+
+ User
+ 用户名
+
+
+ Leave this blank if no proxy username / password are required
+ 若代理不要求用户名或密码，请留空
+
+
+ Password
+ 密码
+
+
+ Proxy type
+ 代理类型
+
+
+ Exclude URLs (starting with)
+ 不包含以下网址（及以以下网址起始的网址）
@@ -45046,10 +37904,6 @@ SQL：%1
Only existing geometry types
仅已有的几何图形类型
-
- Restrict the displayed tables to those that are in the geometry_columns table
- 仅显示geometry_columns表中的表格
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
@@ -45438,7 +38292,7 @@ SQL：%2
Could not reload fields.
-
无法为%1.%2更新元数据.
SQL：%1
错误：%4
-
-
- Could not update metadata for %1.%2.
-SQL:%1
-Error: %2
- 无法为%1 %2更新元数据。
-SQL：%1
-错误：%2
&Add
添加(&A)
-
- &Build query
- 构建查询(&B)
-
-
- Build query
- 构建查询
-
&Set Filter
@@ -45940,14 +38778,6 @@ SQL：%1
QgsPGConnectionItem
-
- Failed to retrieve layers
- 获取图层失败
-
-
- No layers found.
- 未找到任何图层。
-
Edit...
@@ -46071,14 +38901,7 @@ SQL：%1
Label
- 标签
-
-
-
- QgsPasteTransformations
-
- &Add New Transfer
- 添加新的转移器（&A）
+
@@ -46147,6 +38970,11 @@ SQL：%1
Solid Line
实线
+
+ No Pen
+ 不显示画笔
+
Dash Line
@@ -46167,50 +38995,6 @@ SQL：%1
Dash Dot Dot Line
短横-点-点虚线
-
- No Pen
- 不显示画笔
-
-
-
- QgsPgGeoprocessing
-
- Buffer features in layer %1
- 对图层%1中的要素作缓冲区
-
-
- Error connecting to the database
- 连接到数据库时出错
-
-
- &Geoprocessing
- &Geoprocessing
-
-
- Unable to add geometry column
- 无法添加几何属性字段
-
-
- Unable to create table
- 无法创建表
-
-
- No GEOS support
- 没有GEOS支持
-
-
- Buffer function requires GEOS support in PostGIS
- 在PostGIS中缓冲区功能需要GEOS支持
-
-
- No Active Layer
- 没有激活的图层
-
-
- You must select a layer in the legend to buffer
- 您必须在图例中选择一个图层来作缓冲区
-
QgsPgNewConnection
@@ -46293,20 +39077,30 @@ SQL：%1
Name
名称
+
+ Service
+ 服务
+
Host
主机
+
+ Port
+ 端口
+
Database
数据库
- Port
- 端口
+ SSL mode
+ SSL模式
Password
密码
+
+ Name of the new connection
+ 新连接的名称
+
+
+ 5432
+ 5432
+
限制表格显示，仅显示图层注册表中的表格（geometry_columns, geography_columns, topology.layer）。这样可以加速空间表格的初始显示。
- Only look in the layer registries
- 只在图层注册表中查找
+ Only show layers in the layer registries
+
+
+ Restrict the search to the public schema for spatial tables not in the geometry_columns table
+ 针对在geometry_columns表格中不存在的空间表格，限制检索为公有模式
+
+
+ When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
+ 针对在geometry_columns表格中不存在的空间表格，限制检索为公有模式（对某些数据库而言这可以节省很多时间）
+
+
+ Only look in the 'public' schema
+ 只查找“公共”模式
+
+
+ Save Username
+ 保存用户名
+
+
+ &Test Connect
+ 测试连接(&T)
+
+
+ Save Password
+ 保存密码
Use estimated table metadata
使用估算的表格元数据
-
- Don't resolve type of unrestricted columns (GEOMETRY)
- 不解析无限制的字段类型（几何字段，GEOMETRY）
-
-
- SSL mode
- SSL模式
-
-
- Name of the new connection
- 新连接的名称
-
-
- 5432
- 5432
-
-
- Save Username
- 保存用户名
-
-
- Save Password
- 保存密码
-
-
- &Test Connect
- 测试连接(&T)
-
-
- Service
- 服务
-
-
- Only show layers in the layer registries
-
-
- Restrict the search to the public schema for spatial tables not in the geometry_columns table
- 针对在geometry_columns表格中不存在的空间表格，限制检索为公有模式
-
-
- When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
- 针对在geometry_columns表格中不存在的空间表格，限制检索为公有模式（对某些数据库而言这可以节省很多时间）
-
-
- Only look in the 'public' schema
- 只查找“公共”模式
-
Also list tables with no geometry
同时列出不包含几何图形的表格
+
+ Don't resolve type of unrestricted columns (GEOMETRY)
+ 不解析无限制的字段类型（几何字段，GEOMETRY）
+
QgsPgSourceSelect
-
- &Build query
- 构建查询(&B)
-
-
- Build query
- 构建查询
-
-
- Load connections
- 载入连接
-
-
- Wildcard
- 通配符
-
Add PostGIS Table(s)
添加PostGIS表
+
+ &Add
+ 添加(&A)
+
&Set Filter
@@ -46467,6 +39233,12 @@ SQL：%1
Set Filter
设置过滤
+
+ Wildcard
+ 通配符
+
Confirm Delete
确认删除
+
+ Load connections
+ 载入连接
+
XML files (*.xml *XML)
@@ -46551,59 +39328,11 @@ SQL：%1
Stop
终止
-
- Postgres/PostGIS Provider
- Postgres/PostGIS数据源
-
-
- Could not open the Postgres/PostGIS Provider
- 无法打开该Postgres/PostGIS数据源
-
Connect
连接
-
- Connection failed
- 连接失败
-
-
- &Add
- 添加(&A)
-
-
-
- QgsPgSourceSelectBase
-
- Add PostGIS Table(s)
- 添加PostGIS表
-
-
- PostgreSQL Connections
- PostgreSQL连接
-
-
- Delete
- 删除
-
-
- Edit
- 编辑
-
-
- New
- 新建
-
-
- Connect
- 连接
-
-
- Search
- 搜索
-
QgsPgSourceSelectDelegate
@@ -46631,47 +39360,6 @@ SQL：%1
Table
表格
-
- Type
- 类型
-
-
- Geometry column
- 几何字段
-
-
- SRID
- 空间参考标识符
-
-
- Primary key column
- 主键字段
-
-
- Select at id
- 按标识符选择
-
-
- Sql
- Sql
-
-
- Detecting...
- 正在侦测...
-
-
- Select...
- 选择...
-
-
- Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
- 禁用“按标识符快速访问要素”功能来强制使属性表保留在内存中。
-
Column
@@ -46687,11 +39375,41 @@ SQL：%1
Spatial Type
空间类型
+
+ SRID
+ 空间参考标识符
+
Primary Key
主键
+
+ Select at id
+ 按标识符选择
+
+
+ Sql
+ Sql
+
+
+ Select a primary key
+ 选择一个主键
+
+
+ Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
+ 禁用“按标识符快速访问要素”功能来强制使属性表保留在内存中。
+
+
+ Select...
+ 选择...
+
Enter...
输入...
-
- Select a primary key
- 选择一个主键
-
QgsPhotoConfigDlgBase
Form
- 窗体
+
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- 宽度
+
Height
- 高度
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -46753,60 +39466,20 @@ SQL：%1
Select a picture
-
...
- ...
+
QgsPluginInstaller
-
- Couldn't open the local plugin directory
- 无法打开本地插件目录
-
-
- Nothing to remove! Plugin directory doesn't exist:
- 没有东西可以移除！插件目录不存在：
-
-
- Failed to remove the directory:
- 移除目录失败：
-
-
- Check permissions or remove it manually
- 检查权限或手动删除它
-
-
- Fetch Python Plugins...
- 安装Python插件...
-
-
- Install more plugins from remote repositories
- 从远程插件库安装更多插件
-
Looking for new plugins...
正在查找新插件...
-
- QGIS Plugin Installer update
- QGIS插件安装器更新
-
-
- The Plugin Installer has been updated. Please restart QGIS prior to using it
- 插件安装器已被更新。请重启QGIS以便使用更新后的插件安装器
-
-
- QGIS Plugin Conflict:
- QGIS插件冲突：
-
-
- The Plugin Installer has detected an obsolete plugin which masks a newer version shipped with this QGIS version. This is likely due to files associated with a previous installation of QGIS. Please use the Plugin Installer to remove that older plugin in order to unmask the newer version shipped with this copy of QGIS.
- 插件安装器已检测到一个过时插件，该插件掩盖了此版本QGIS中附带的较新版本。这可能是由于以前安装的旧版QGIS残留了相关文件。请用插件安装器删除旧插件，以取消掩盖此QGIS副本附带的较新版本。
-
There is a new plugin available
有一个新插件可用
@@ -46815,6 +39488,58 @@ SQL：%1
There is a plugin update available
有一个插件更新可用
+
+ QGIS Python Plugin Installer
+ QGIS Python插件安装器
+
+
+ If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
+ 如果你没有手动取消下载，那有可能是因为时间超限所导致。在这种情况下可尝试延长GQIS选项中的连接超时限制再重新下载.
+
+
+ Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
+ 服务响应为2000k，但不含有插件元数据。这种情况很可能是因为代理插件库链接或者链接错误所致。你可以尝试在QGIS选型窗口中配置新的代理设置。
+
+
+ Status code:
+ 状态代码：
+
+
+ The plugin exited with error status: {0}
+ 插件异常退出的错误状态为：{0}
+
+
+ Unknown error
+ 未知错误
+
+
+ Missing metadata file
+
+
+ Error reading metadata
+
+
+ Uninstall (recommended)
+ 卸载（建议）
+
+
+ I will uninstall it later
+ 将在稍后卸载
+
+
+ Obsolete plugin:
+ 废弃的插件：
+
+
+ QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
+ QGIS检测到一个废弃的插件，该插件掩盖了随此版QGIS一起提供的更新版本。这可能是先前安装的QGIS遗留下来的。你要立刻删除该插件，以解除它对新版插件的掩盖吗？
+
+
+ Error reading repository:
+ 读取插件库时出错：
+
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
你确实要将该插件降级为可用的最新版本吗？当前已安装的版本比可用的最新版本还要新！
@@ -46828,7 +39553,7 @@ SQL：%1
插件已消失
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
插件似乎已经安装，但我不知到安装到了哪里。或许插件包包含了错误的目录名称。请搜索已安装的插件列表。我几乎可以肯定你能在列表中找到该插件，但我不能确定其中哪个是。这也意味着我不能确定该插件是否已经安装，也不能通知你可用的版本更新。尽管如此该插件仍有可能可以使用。请联系插件作者并提交问题报告。
@@ -46870,14 +39595,6 @@ You need to restart QGIS in order to reload it.
Warning: this plugin isn't available in any accessible repository!
警告：该插件在任何可访问的插件库中都不可用！
-
- If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
- 如果你没有手动取消下载，那有可能是因为时间超限所导致。在这种情况下可尝试延长GQIS选项中的连接超时限制再重新下载.
-
-
- Plugin Installer update uninstalled. Plugin Installer will now close and revert to its primary version. You can find it in the Plugins menu and continue operation.
- 插件安装器的更新已经被卸载。插件安装器将立即关闭并还原回主版本。你可以在插件菜单中找到它，并继续操作。
-
Plugin uninstalled successfully
插件已成功卸载
@@ -46899,565 +39616,24 @@ You need to restart QGIS in order to reload it.
你确实要移除以下插件库吗？
- QGIS Python Plugin Installer
- QGIS Python插件安装器
+ If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
+ 如果你没有手动取消下载，那有可能是因为时间超限所导致。在这种情况下可尝试延长GQIS选项中的连接超时限制再重新下载.
QGIS Official Plugin Repository
QGIS官方插件库
- If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
- 如果你没有手动取消下载，那有可能是因为时间超限所导致。在这种情况下可尝试延长GQIS选项中的连接超时限制再重新下载.
+ Nothing to remove! Plugin directory doesn't exist:
+ 没有东西可以移除！插件目录不存在：
- Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
- 服务响应为2000k，但不含有插件元数据。这种情况很可能是因为代理插件库链接或者链接错误所致。你可以尝试在QGIS选型窗口中配置新的代理设置。
+ Failed to remove the directory:
+ 移除目录失败：
- Status code:
- 状态代码：
-
-
- The plugin exited with error status: {0}
- 插件异常退出的错误状态为：{0}
-
-
- Unknown error
- 未知错误
-
-
- Missing metadata file
-
-
- Error reading metadata
-
-
- Uninstall (recommended)
- 卸载（建议）
-
-
- I will uninstall it later
- 将在稍后卸载
-
-
- Obsolete plugin:
- 废弃的插件：
-
-
- QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
- QGIS检测到一个废弃的插件，该插件掩盖了随此版QGIS一起提供的更新版本。这可能是先前安装的QGIS遗留下来的。你要立刻删除该插件，以解除它对新版插件的掩盖吗？
-
-
- Error reading repository:
- 读取插件库时出错：
-
-
-
- QgsPluginInstallerDialog
-
- QGIS Python Plugin Installer
- QGIS Python插件安装器
-
-
- Error reading repository:
- 读取插件库时出错：
-
-
- all repositories
- 全部插件库
-
-
- connected
- 已连接
-
-
- This repository is connected
- 该插件库已经连接
-
-
- unavailable
- 不可用
-
-
- This repository is enabled, but unavailable
- 该插件库虽然已经启用，但无法使用
-
-
- disabled
- 禁用
-
-
- This repository is disabled
- 该插件库已经禁用
-
-
- This repository is blocked due to incompatibility with your Quantum GIS version
- 该插件库与你的Quantum GIS版本不兼容，因此已被禁用
-
-
- orphans
- 孤立
-
-
- any status
- 任何状态
-
-
- not installed
- 未安装
-
-
- installed
- 已安装
-
-
- upgradeable and news
- 可升级的插件和新插件
-
-
- This plugin is not installed
- 未安装该插件
-
-
- This plugin is installed
- 已经安装了该插件
-
-
- This plugin is installed, but there is an updated version available
- 已经安装了该插件。该插件有新版本可用
-
-
- This plugin is installed, but I can't find it in any enabled repository
- 已经安装了该插件。但在全部已启用的插件库中都找不到该插件
-
-
- This plugin is not installed and is seen for the first time
- 未安装该插件。该插件在插件库中第一次出现
-
-
- This plugin is installed and is newer than its version available in a repository
- 已经安装了该插件。该插件已安装的版本比插件库中可用的版本还要新
-
-
- This plugin is incompatible with your Quantum GIS version and probably won't work.
- 该插件与你的Quantum GIS版本不兼容，可能无法正常工作。
-
-
- The required Python module is not installed.
-For more information, please visit its homepage and Quantum GIS wiki.
- 所需的Python模块尚未安装。
-详细信息请访问其主页及Quantum GIS wiki。
-
-
- This plugin seems to be broken.
-It has been installed but can't be loaded.
-Here is the error message:
- 该插件似乎已经破损。
-虽然已经安装，但无法载入。
-以下是错误消息：
-
-
- upgradeable
- 可升级
-
-
- new!
- 新插件！
-
-
- invalid
- 无效
-
-
- Note that it's an uninstallable core plugin
- 请注意，这是一个不可安装的核心插件
-
-
- installed version
- 已安装的版本
-
-
- available version
- 可用版本
-
-
- That's the newest available version
- 那便是可用的最新版本
-
-
- There is no version available for download
- 没有任何版本可供下载
-
-
- This plugin is broken
- 该插件已经破损
-
-
- This plugin requires a newer version of Quantum GIS
- 该插件依赖新版本的Quantum GIS
-
-
- at least
- 至少
-
-
- This plugin requires a missing module
- 该插件依赖的一个模块缺失
-
-
- only locally available
- 仅本地可用
-
-
- Experimental plugin. Use at own risk
- 试验性插件。使用这类插件风险自担
-
-
- - %d plugins available
- - %d 个插件可用
-
-
- Install plugin
- 安装插件
-
-
- Reinstall plugin
- 重新安装插件
-
-
- Upgrade plugin
- 升级插件
-
-
- Install/upgrade plugin
- 安装/升级插件
-
-
- Downgrade plugin
- 降级插件
-
-
- Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
- 你确实要将该插件降级为可用的最新版本吗？当前已安装的版本比可用的最新版本还要新！
-
-
- Plugin installation failed
- 插件安装失败
-
-
- Plugin has disappeared
- 插件已消失
-
-
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
-Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
- 插件似乎已经安装，但我不知到安装到了哪里。或许插件包包含了错误的目录名称。请搜索已安装的插件列表。我几乎可以肯定你能在列表中找到该插件，但我不能确定其中哪个是。这也意味着我不能确定该插件是否已经安装，也不能通知你可用的版本更新。尽管如此该插件仍有可能可以使用。请联系插件作者并提交问题报告。
-
-
- Plugin installed successfully
- 插件已成功安装
-
-
- Python plugin installed.
-Now you need to enable it in Plugin Manager.
- Python插件已经安装。
-现在你需要做的是到插件管理器中启用该插件。
-
-
- Plugin reinstalled successfully
- 插件已经成功重新安装
-
-
- Python plugin reinstalled.
-You need to restart Quantum GIS in order to reload it.
- Python插件已经重新安装。
-你需要重新启动Quantum GIS软件以便重新载入该插件。
-
-
- The plugin is designed for a newer version of Quantum GIS. The minimum required version is:
- 该插件为新版本的Quantum GIS设计。最低版本需求：
-
-
- The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
- 该插件依赖于某些你系统中缺失的组件。你需要安装以下Python模块才能启用该插件：
-
-
- The plugin is broken. Python said:
- 破损的插件。Python返回的信息：
-
-
- Plugin uninstall failed
- 插件卸载失败
-
-
- Are you sure you want to uninstall the following plugin?
- 你确实要卸载以下插件吗？
-
-
- Warning: this plugin isn't available in any accessible repository!
- 警告：该插件在任何可访问的插件库中都不可用！
-
-
- Plugin Installer update uninstalled. Plugin Installer will now close and revert to its primary version. You can find it in the Plugins menu and continue operation.
- 插件安装器的更新已经被卸载。插件安装器将立即关闭并还原回主版本。你可以在插件菜单中找到它，并继续操作。
-
-
- Plugin Installer update uninstalled. Please restart QGIS in order to load its primary version.
- 插件安装器的更新已经被卸载。请重启QGIS以载入其主版本。
-
-
- Plugin uninstalled successfully
- 插件已成功卸载
-
-
- Python plugin uninstalled. Note that you may need to restart Quantum GIS in order to remove it completely.
- Python插件已经卸载。注意你可能需要重新启动Quantum GIS软件以便彻底卸载该插件。
-
-
- You are about to add several plugin repositories that are neither authorized nor supported by the Quantum GIS team. Plugin authors generally make efforts to ensure that their work is useful and safe, however, we can assume no responsibility for them.
- 你即将添加的几个插件库既没有获得Quantum GIS团队授权，也不受Quantum GIS团队支持。一般来说插件作者会努力确保他们所做的工作是有用并安全的。尽管如此，我们不为他们负任何责任。
-
-
- Unable to add another repository with the same URL!
- 不能再以相同网址添加另一个插件库！
-
-
- Are you sure you want to remove the following repository?
- 你确实要移除以下插件库吗？
-
-
-
- QgsPluginInstallerDialogBase
-
- QGIS Python Plugin Installer
- QGIS Python插件安装器
-
-
- Help
- 帮助
-
-
- Plugins
- 插件
-
-
- List of available and installed plugins
- 可用插件和已安装插件列表
-
-
- Filter:
- 过滤：
-
-
- Display only plugins containing this word in their metadata
- 仅显示元数据中包含这个词的插件
-
-
- Display only plugins from given repository
- 仅显示指定插件库中的插件
-
-
- all repositories
- 全部插件库
-
-
- Display only plugins with matching status
- 仅显示状态匹配的插件
-
-
- State
- 状态
-
-
- Status
- 状态
-
-
- Name
- 名称
-
-
- Version
- 版本
-
-
- Description
- 描述
-
-
- Author
- 作者
-
-
- Repository
- 插件库
-
-
- Upgrade all
- 全部升级
-
-
- Install, reinstall or upgrade the selected plugin
- 安装、重装或升级选中的插件
-
-
- Install/upgrade plugin
- 安装/升级插件
-
-
- Uninstall the selected plugin
- 卸载选中的插件
-
-
- Uninstall plugin
- 卸载插件
-
-
- Repositories
- 插件库
-
-
- List of plugin repositories
- 插件库列表
-
-
- URL
- 网址
-
-
- Add the contributed repository to the list
- 添加捐赠插件库到列表
-
-
- Add the contributed repository
- 添加捐赠插件库
-
-
- Remove depreciated repositories from the list
- 将废旧插件库从列表中移除
-
-
- Delete depreciated repositories
- 删除废旧插件库
-
-
- Check for updates on startup
- 打开QGIS软件时检查更新
-
-
- Add 3rd party repositories
- 添加第三方插件库
-
-
- Add a new plugin repository
- 添加一个新的插件库
-
-
- Add...
- 添加...
-
-
- Edit the selected repository
- 编辑选中的插件库
-
-
- Edit...
- 编辑...
-
-
- Remove the selected repository
- 移除选中的插件库
-
-
- Delete
- 删除
-
-
- The plugins will be installed to ~/.qgis/python/plugins
- 插件将被安装到 ~/.qgis/python/plugins
-
-
- Close the Installer window
- 关闭安装器窗口
-
-
- Close
- 关闭
-
-
- Options
- 选项
-
-
- Configuration of the plugin installer
- 插件安装器配置
-
-
- every time QGIS starts
- 每次打开QGIS软件
-
-
- once a day
- 每天
-
-
- every 3 days
- 每三天
-
-
- every week
- 每个星期
-
-
- every 2 weeks
- 每两个星期
-
-
- every month
- 每个月
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, Quantum GIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Installer window.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">注意：</span>如果启用此功能，每当出现新插件或插件更新可用时，Quantum GIS都会通知你。若不启用，则只会在每次打开插件安装器窗口时才获取插件库信息。</p></body></html>
-
-
- Allowed plugins
- 允许哪些插件
-
-
- Only show plugins from the official repository
- 只显示官方插件库中的插件
-
-
- Show all plugins except those marked as experimental
- 显示除了带试验性标志之外的其他所有插件
-
-
- Show all plugins, even those marked as experimental
- 显示所有插件，包括试验性插件
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">注意：</span>试验性插件一般不适合生产用途。这些插件尚在发展的初期阶段，应被视为“不完整的”工具或“概念验证”工具。QGIS建议不要安装这些插件，除非你打算出于测试目的使用它们。</p></body></html>
+ Check permissions or remove it manually
+ 检查权限或手动删除它
@@ -47584,33 +39760,6 @@ p, li { white-space: pre-wrap; }
正在连接...
-
- QgsPluginInstallerOldReposBase
-
- Plugin Installer
- 插件安装器
-
-
- The Plugin Installer has detected that your copy of QGIS is configured to use a number of plugin repositories around the world. It was a typical situation in older versions of the program, but from the version 1.5, external plugins are collected in one central Contributed Repository, and all the old repositories are not necessary any more. Do you want to drop them now? If you're unsure what to do, probably you don't need them. However, if you choose to keep them in use, you will be able to remove them manually later.
- 插件安装器检测到您的QGIS副本配置使用了一些来自世界各地的插件库。旧版本程序中这种情况很常见，但从版本1.5开始，外部插件都被收集在一个中央插件库中，所有旧仓库都已变得没必要。你想现在删除掉它们吗？如果你不确定该怎么做，最大的可能是，你已经并再不需要它们。不过，如果你选择保留并继续使用这些插件库，稍后你仍可手动删除它们。
-
-
- Remove
- 移除
-
-
- Disable
- 禁用
-
-
- Keep
- 保留
-
-
- Ask me later
- 稍后再问
-
-
QgsPluginInstallerPluginErrorDialog
@@ -47643,20 +39792,12 @@ p, li { white-space: pre-wrap; }
Repository details
插件库详情
-
- Name:
- 名称：
-
Enter a name for the repository
输入插件库的名称
-
- URL:
- 网址：
-
Name
@@ -47697,6 +39838,12 @@ p, li { white-space: pre-wrap; }
QgsPluginManager
+
+ Plugins
+ 插件
+
sort by name
@@ -47717,27 +39864,56 @@ p, li { white-space: pre-wrap; }
sort by status
按状态排序
-
- sort by repository
- 按插件库排序
-
-
- To enable or disable plugin, click its checkbox or doubleclick its name...
- 要启用或禁用插件，点击其复选框或双击其名称即可...
-
No Plugins
没有插件
+
+ No QGIS plugins found in %1
+ %1内没有找到QGIS插件
+
+
+ Only locally available
+ category: plugins that are only locally available
+ 仅本地可用
+
+
+ Reinstallable
+ category: plugins that are installed and available
+ 可重装
+
+
+ Upgradeable
+ category: plugins that are installed and there is a newer version available
+ 可升级
+
+
+ Downgradeable
+ category: plugins that are installed and there is an OLDER version available
+ 可降级
+
+
+ Installable
+ category: plugins that are available for installation
+
This plugin is incompatible with this version of QGIS
该插件跟当前版本的QGIS不兼容
- Compatible versions:
- 兼容于版本：
+ Plugin designed for QGIS %1
+ compatible QGIS version(s)
+ 为QGIS %1 设计的插件
This plugin is deprecated
-
-
- %1 rating vote(s)
-
-
- %1 downloads
- %1已下载
+
Author
作者
-
- Vote sent successfully
-
-
- Sending vote to the plugin repository failed.
-
More info
更多信息
- Installable
- category: plugins that are available for installation
- %1 rating vote(s)
+
+
+ %1 downloads
+ %1已下载
code_ repository
代码库
-
- Reload all repositories
- 重新载入全部插件库
-
-
- Only show plugins from selected repository
- 只显示所选插件库中的插件
-
-
- Clear filter
- 清除过滤
-
-
- <br/>%1 rating vote(s)<br/>
- <br/>%1个评分投票<br/>
-
-
- Reinstallable
- category: plugins that are installed and available
- 可重装
-
-
- Upgradeable
- category: plugins that are installed and there is a newer version available
- 可升级
-
-
- Only locally available
- category: plugins that are only locally available
- 仅本地可用
-
-
- Downgradeable
- category: plugins that are installed and there is an OLDER version available
- 可降级
-
-
- Plugin designed for QGIS %1
- compatible QGIS version(s)
- 为QGIS %1 设计的插件
-
-
- %1 downloads<br/>
- %1次下载<br/>
-
Installed version: %1 (in %2)<br/>
@@ -47914,19 +40021,30 @@ p, li { white-space: pre-wrap; }
Downgrade plugin
降级插件
-
- Reinstall plugin
- 重新安装插件
-
Install plugin
安装插件
- Install/upgrade plugin
- 安装/升级插件
+ Reinstall plugin
+ 重新安装插件
+
+
+ Reload all repositories
+ 重新载入全部插件库
+
+
+ Only show plugins from selected repository
+ 只显示所选插件库中的插件
+
+
+ Clear filter
+ 清除过滤
该插件库已经被封，因为它与你的QGIS版本不兼容
- &Select All
- 全选(&S)
+ Vote sent successfully
+
- &Clear All
- 全部清除(&C)
-
-
- Plugins
- 插件
-
-
- [ incompatible ]
- [不兼容]
-
-
- Installed in %1 menu/toolbar
- 已安装到%1 菜单/工具栏
-
-
- No QGIS plugins found in %1
- %1内没有找到QGIS插件
-
-
- Error
- 错误
-
-
- Failed to open plugin installer!
- 打开插件安装器失败！
-
-
- <h3>Installed Plugins</h3><p>On the left you see the list of <b>installed plugins</b> on your system. Both python and cpp plugins are listed. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin.To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. Consult the 'Invalid' tab to see more details, or to reinstall or uninstall this plugin.</p>
- <h3>已安装的插件</h3><p>在你的系统左侧你可以看到 <b>已安装的插件</b>列表。列表中同时显示了python插件和C++插件，其中一些是QGIS安装时自带的，而大部分是通过插件库所获取的。</p><p>你可以临时激活或禁止其中的插件，勾选或取消对应的复选框即可。</p><p>以<span style='color:red'>红色</span>显示的表示该插件存在问题，不能安装到QGIS中。你可以到“非法无效”选项卡下查看更多信息，或者尝试重新安装或者卸载该插件。</p>
+ Sending vote to the plugin repository failed.
+
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
<h3>可更新的插件</h3><p>这里是<b>可更新的插件</b>。即是说插件库中含有对应插件的更新版本可供下载。</p>
-
- <h3>Get more plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
- <h3>获取更多插件</h3><p>这里显示的是插件库中所有的但<b>尚未安装</b>的插件。</p><p>点击插件名可以查看更多信息。</p><p>通过右键菜单可以对插件列表进行排序。</p><p>点击插件名，然后点击“安装插件”按钮以安装插件。</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
QgsPluginManagerBase
- QGIS Plugin Manager
- QGIS插件管理器
+ Plugin Manager
+ 插件管理器
+
+
+ All
+
已安装的插件
- Get more
- 获取更多
-
-
- Uninstalled plugins available for download
- 已卸载的插件，可供下载
+ Not installed plugins available for download
+ 可下载的未安装插件
可升级
- Installed plugins with newer version available
- 已安装的插件，有新版可用
+ Installed plugins with more recent version available for download
+ 已安装插件有新版本可下载
新插件
- New plugins seens for thw first time
- 第一次出现的新插件
+ Not installed plugins seen for the first time
+ 未安装的插件第一次可见
无效插件
- Broken or uncompatible installed plugins
- 已安装但损坏或不兼容的插件
+ Broken and incompatible installed plugins
+ 已损坏或不兼容的安装插件
设置
- Plugins
- 插件
+ Search
+ 搜索
- &Filters
- 过滤(&F)
+ Not installed
+
- Search in:
- 搜索：
-
-
- names
- 名称
-
-
- descriptions
- 描述
-
-
- tags
- 标签
-
-
- authors
- 作者
+ about:blank
+
Upgrade all
全部升级
-
- Install, reinstall or upgrade the selected plugin
- 安装、重装或升级选中的插件
-
-
- Install/upgrade plugin
- 安装/升级插件
-
-
- Plugin Manager
- 插件管理器
-
-
- All
-
-
- Not installed
-
-
- Not installed plugins available for download
- 可下载的未安装插件
-
-
- Installed plugins with more recent version available for download
- 已安装插件有新版本可下载
-
-
- Not installed plugins seen for the first time
- 未安装的插件第一次可见
-
-
- Broken and incompatible installed plugins
- 已损坏或不兼容的安装插件
-
-
- Search
- 搜索
-
-
- in:
- in：
-
-
- about:blank
- about:blank
-
Uninstall the selected plugin
@@ -48200,6 +40220,11 @@ p, li { white-space: pre-wrap; }
Uninstall plugin
卸载插件
+
+ Install, reinstall or upgrade the selected plugin
+ 安装、重装或升级选中的插件
+
Reinstall plugin
@@ -48250,56 +40275,13 @@ p, li { white-space: pre-wrap; }
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">注意:</span> 如果该插件已被激活, QGIS将会随时通知你该插件是否已有更新. 否则, 插件版本信息仅在你打开插件管理窗口时被刷新.</p></body></html>
-
-
- Show also deprecated plugins
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
-
- Reload repository contents
-(useful when you uploaded a plugin there)
- 重新加载存储库内容
-（当你上传一个插件时该操作很有效）
-
-
- Reload repository
- 重新加载插件库
-
-
- Configure an additional plugin repository
- 配置额外的插件库
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening the Plugin Manager window.</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">注意：</span>如果启用此功能，每当出现新插件或插件更新可用时，QGIS都会通知你。若不启用，则只会在每次打开插件安装器窗口时才获取插件库信息。</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -48319,6 +40301,20 @@ p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">注意：</span>试验性插件一般不适合生产用途。这些插件尚在发展的初期阶段，应被视为“不完整的”工具或“概念验证”工具。QGIS建议不要安装这些插件，除非你打算出于测试目的使用它们。</p></body></html>
+
+ Show also deprecated plugins
+
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
+
Plugin repositories
@@ -48340,8 +40336,21 @@ p, li { white-space: pre-wrap; }
网址
- Reload all repositories
- 重新载入全部插件库
+ Reload repository contents
+(useful when you uploaded a plugin there)
+ 重新加载存储库内容
+（当你上传一个插件时该操作很有效）
+
+
+ Reload repository
+ 重新加载插件库
+
+
+ Configure an additional plugin repository
+ 配置额外的插件库
Delete
删除
-
- To enable / disable a plugin, click its checkbox or description
- 要启用或禁用插件，点击其复选框或描述即可
-
-
- &Filter
- 过滤(&F)
-
-
- Plugin Directory:
- 插件目录：
-
-
- Directory
- 目录
-
-
- Plugin Installer
- 插件安装器
-
QgsPointDisplacementRendererWidget
@@ -48411,10 +40400,6 @@ p, li { white-space: pre-wrap; }
Label Font
标签字体
-
- Label color
- 标签颜色
-
The point displacement renderer only applies to (single) point layers.
@@ -48509,7 +40494,7 @@ p, li { white-space: pre-wrap; }
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Point
点
+
+ Multipoint
+ 点集
+
Line
线条
+
+ Multiline
+ 线集
+
Polygon
多边形
+
+ Multipolygon
+ 多边形集
+
No Geometry
没有几何图形
+
+ Unknown Geometry
+ 未知几何图形
+
None
@@ -48756,118 +40761,9 @@ SQL：%2
PQgetCancel failed
PQgetCancel执行失败
-
- Multipoint
- 点集
-
-
- Multiline
- 线集
-
-
- Multipolygon
- 多边形集
-
-
- Unknown Geometry
- 未知几何图形
-
-
-
- QgsPostgresFeatureIterator
-
- feature %1 not found
- 未找到要素%1
-
-
- PostGIS
- PostGIS
-
-
- found %1 features instead of just one.
- 找到%1个要素，而不只是一个。
-
QgsPostgresProvider
-
- No suitable key column in view
- 视图中没有合适的键字段
-
-
- No GEOS Support!
- 没有GEOS支持!
-
-
- Duplicate field %1 found
-
- 找到重复字段%1
-
-
- PostgreSQL is still in recovery after a database crash
-(or you are connected to a (read-only) slave).
-Write accesses will be denied.
- PostgreSQL仍在数据库崩溃后的修复过程中
-（或者您已连接到一个（只读的）从属数据库）。
-写入访问会被拒绝。
-
-
- Unable to execute the query.
-The error message from the database was:
-%1.
-SQL: %2
- 无法执行查询。
-数据库返回以下错误消息：
-%1。
-SQL：%2
-
-
- Whole number (smallint - 16bit)
- 整数（16位整型）
-
-
- invalid PostgreSQL topology layer
- 无效的PostgreSQL拓扑图层
-
-
- Decimal number (numeric)
- 十进制数（数字）
-
-
- Decimal number (decimal)
- 十进制数（小数）
-
-
- Decimal number (real)
- 小数（实型）
-
-
- Decimal number (double)
- 小数（双精度）
-
-
- Text, fixed length (char)
- 文本，固定长度（char）
-
-
- Whole number (integer - 32bit)
- 整数（32位整型）
-
invalid PostgreSQL layer
@@ -48900,11 +40796,56 @@ SQL：%2
PostGIS
PostGIS
+
+ invalid PostgreSQL topology layer
+ 无效的PostgreSQL拓扑图层
+
+
+ PostgreSQL layer has no primary key.
+ PostgreSQL图层不含主键。
+
+
+ Whole number (smallint - 16bit)
+ 整数（16位整型）
+
+
+ Whole number (integer - 32bit)
+ 整数（32位整型）
+
Whole number (integer - 64bit)
整数（64位整型）
+
+ Decimal number (numeric)
+ 十进制数（数字）
+
+
+ Decimal number (decimal)
+ 十进制数（小数）
+
+
+ Decimal number (real)
+ 小数（实型）
+
+
+ Decimal number (double)
+ 小数（双精度）
+
+
+ Text, fixed length (char)
+ 文本，固定长度（char）
+
Text, limited variable length (varchar)
@@ -48916,28 +40857,20 @@ SQL：%2
文本，长度不限（text）
- Couldn't get the feature geometry in binary form
- 无法以二进制形式获取要素几何图形
+ Date
+ 日期
+
+
+ PostgreSQL layer has unknown primary key type.
+ PostgreSQL图层包含无法识别的主键类型。
Read attempt on an invalid postgresql data source
尝试读取一个无效的PostgreSQL数据源
-
- Fetching from cursor %1 failed
-Database error: %2
- 游标%1处获取失败
-数据库错误：%2
-
-
- feature %1 not found
- 未找到要素%1
-
-
- found %1 features instead of just one.
- 找到%1个要素，而不只是一个。
-
FAILURE: Field %1 not found.
@@ -48954,6 +40887,17 @@ Database error: %2
Field %1 ignored, because of unsupported type %2
忽略了字段%1，因为类型%2不受支持
+
+ Field %1 ignored, because of unsupported type type %2
+ 忽略了字段%1，因为类型%2不受支持
+
+
+ Duplicate field %1 found
+
+ 找到重复字段%1
+
Unable to access the %1 relation.
@@ -48964,6 +40908,15 @@ SQL: %3
数据库返回以下错误消息：
%2。
SQL：%3
+
+
+ PostgreSQL is still in recovery after a database crash
+(or you are connected to a (read-only) slave).
+Write accesses will be denied.
+ PostgreSQL仍在数据库崩溃后的修复过程中
+（或者您已连接到一个（只读的）从属数据库）。
+写入访问会被拒绝。
自定义查询不是select（选择）查询。
- The table has no column suitable for use as a key. Quantum GIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
- 表中有没有适合作为一个键的字段。Quantum GIS要求表具有一个主键，一个PostgreSQL的oid字段，或者一个ctid。
-
-
- Primary key field '%1' for view not unique.
- 视图的主键字段‘%1’值不唯一.
-
-
- Date
- 日期
-
-
- PostgreSQL layer has no primary key.
- PostgreSQL图层不含主键。
-
-
- PostgreSQL layer has unknown primary key type.
- PostgreSQL图层包含无法识别的主键类型。
-
-
- Field %1 ignored, because of unsupported type type %2
- 忽略了字段%1，因为类型%2不受支持
+ Unable to execute the query.
+The error message from the database was:
+%1.
+SQL: %2
+ 无法执行查询。
+数据库返回以下错误消息：
+%1。
+SQL：%2
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
表中有没有适合作为一个键的字段。QGIS要求表具有一个主键，一个PostgreSQL的oid字段，或者一个ctid。
+
+ Primary key field '%1' for view not unique.
+ 视图的主键字段‘%1’值不唯一.
+
Key field '%1' for view not found.
@@ -49190,10 +41130,6 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select project file
选择项目文件
-
- QGis files
- QGIS文件
-
QGIS files
@@ -49231,167 +41167,159 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
QgsProjectProperties
- Layer
图层
- Type
类型
- Identifiable
是否可识别
- Vector
矢量
- WMS
WMS
- Raster
栅格
- Coordinate System Restriction
坐标参照系
- No coordinate systems selected. Disabling restriction.
未选择坐标参照系。取消限制。
- Selection color
选区颜色
- Measure tool (CRS transformation: %1)
测量工具（坐标参照系转换：%1）
- Canvas units (CRS transformation: %1)
视图单位（坐标参照系转换：%1）
+ OFF
关闭
+ ON
打开
- CRS %1 was already selected
已经选择了坐标参照系%1
- Coordinate System Restrictions
坐标系限制
- The current selection of coordinate systems will be lost.
Proceed?
当前选择的坐标系将会丢失。
继续吗？
- Select print composer
选择打印版式
- Composer Title
版式标题
- Select restricted layers and groups
选择限制图层和组
- Enter scale
输入比例尺
- Scale denominator
比例尺分母
- Load scales
载入比例尺
- XML files (*.xml *.XML)
XML文件(*.xml *.XML)
- Save scales
保存比例尺
- Parameters :
- 参数：
-
-
- Parameters:
- 参数：
-
-
- Select %1 from pull-down menu to adjust radii
- 从下拉菜单中选择%1以调整半径
-
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
- 启用坐标参照系转换后只能使用椭球计算
-
-
- Transparency %1%
- 透明度 %1%
-
-
- Select a valid symbol
选择一个有效的符号
- Invalid symbol :
无效的符号：
+
+ Parameters:
+ 参数：
+
+
+ Select %1 from pull-down menu to adjust radii
+ 从下拉菜单中选择%1以调整半径
+
+
+ Can only use ellipsoidal calculations when CRS transformation is enabled
+ 启用坐标参照系转换后只能使用椭球计算
+
QgsProjectPropertiesBase
@@ -49400,26 +41328,6 @@ Proceed?
Project Properties
项目属性
-
- Meters
- 米
-
-
- Feet
- 英尺
-
-
- Decimal degrees
- 十进制度
-
-
- Default project title
- 默认项目标题
-
通用
- Automatic
- 自动
+ General settings
+ 通用设置
- Automatically sets the number of decimal places in the mouse position display
- 在鼠标位置的显示中自动设置小数位数
-
-
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
- 显示鼠标位置时用到的小数位数自动设置为足够大，这样在鼠标移动一个像素的时候，位置的显示能够有所变化
-
-
- Manual
- 手动
-
-
- Sets the number of decimal places to use for the mouse position display
- 为鼠标位置的显示设置小数位数
-
-
- The number of decimal places for the manual option
- 手动选项的小数位数
-
-
- decimal places
- 位小数
-
-
- Precision
- 精度
-
-
- Digitizing
- 数字化
+ Project title
+ 项目标题
描述性的项目名称
- Project title
- 项目标题
+ Default project title
+ 默认项目标题
Selection color
选区颜色
+
+ Background color
+ 背景颜色
+
+
+ absolute
+ 绝对路径
+
+
+ relative
+ 相对路径
+
+
+ Save paths
+ 保存路径
+
+
+ Measure tool
+ 测量工具
+
+
+ Semi-minor
+ 半次要
+
+
+ Semi-major
+ 半主要
+
+
+ Used when CRS transformation is turned off
+ 坐标参照系转换关闭时使用
+
+
+ Canvas units
+ 视图单位
+
+
+ Meters
+ 米
+
+
+ Feet
+ 英尺
+
CRS
@@ -49516,275 +41442,340 @@ Proceed?
OWS服务器
- Relations
- 关系
-
-
- Background color
- 背景颜色
-
-
- Project file
- 项目文件
-
-
- Measure tool
- 测量工具
-
-
- Ellipsoid
(for distance calculations)
椭球面（用于距离计算）
- Semi-major
- 半主要
-
-
- Semi-minor
- 半次要
-
-
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
-
- WFS capabilities
-
-
- Coordinate Reference System (CRS)
- 坐标参照系
-
-
- Enable 'on the fly' CRS transformation
- 启用动态（on the fly）坐标参照系转换功能
-
-
- Layer units (only used when CRS transformation is disabled)
- 图层单位（仅当禁用坐标参照系转换功能时才会被使用）
-
-
- General settings
- 通用设置
-
-
- Used when CRS transformation is turned off
- 坐标参照系转换关闭时使用
-
-
- Canvas units
- 视图单位
-
-
- Degree
度
- Nautical miles
-
-
- Degree display
显示度
- Decimal degrees
+ 十进制度
+
+
+ Degrees, Minutes
度、分
- Degrees, Minutes, Seconds
+ 度、分、秒
+
+
+ Precision
+ 精度
+
+
+ Automatically sets the number of decimal places in the mouse position display
+ 在鼠标位置的显示中自动设置小数位数
+
+
+ The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
+ 显示鼠标位置时用到的小数位数自动设置为足够大，这样在鼠标移动一个像素的时候，位置的显示能够有所变化
+
+
+ Automatic
+ 自动
+
+
+ Sets the number of decimal places to use for the mouse position display
+ 为鼠标位置的显示设置小数位数
+
+
+ Manual
+ 手动
+
+
+ The number of decimal places for the manual option
+ 手动选项的小数位数
+
+
+ decimal places
+ 位小数
+
+
+ Project scales
项目比例尺
- ...
...
+
+ Enable 'on the fly' CRS transformation
+ 启用动态（on the fly）坐标参照系转换功能
+
Identifiable layers
可识别的图层
- Project layers
项目图层
- Layer
图层
- Type
类型
- Identifiable
是否可识别
- Marker
标记
- Line
线条
- Fill
- 填充
-
-
- Color Ramp
- 颜色渐变
-
-
- Style Manager
- 样式管理器
-
-
- Options
- 选项
-
-
- Assign random colors to symbols
- 给符号指派随机颜色
-
-
- OWS Server
- OWS服务器
-
-
- Title
- 标题
-
-
- Person
- 人员
-
-
- Defaut styles
- 默认样式
-
-
- Default symbols
默认符号
- Fill
+ 填充
+
+
+ Color Ramp
+ 颜色渐变
+
+
+ Transparency
透明度
- %
%
- Service capabilitities
- 服务性能
+ Style Manager
+ 样式管理器
- Phone
- 电话
+ Options
+ 选项
- Abstract
- 摘要
+ Relations
+
- E-Mail
- 电子邮件
+ Nautical miles
+
- Assign random colors to symbols
+ 给符号指派随机颜色
+
+
+ Service capabilities
-
- Person
+ 人员
+
+
+ Title
+ 标题
+
+
+ Organization
组织
- Online resource
在线资源
- WMS capabilities
- E-Mail
+ 电子邮件
- Phone
+ 电话
+
+
+ Abstract
+ 摘要
+
+
+ Fees
+ 费用
+
+
+ Access constraints
+ 访问限制
+
+
+ Keyword list
+ 关键字列表
+
+
+ WMS capabilities
+
+
+ Add geometry to feature response
+
+
+ Min. X
横坐标最小值
- Min. Y
纵坐标最小值
- Max. X
横坐标最大值
- Max. Y
横坐标最大值
- Use Current Canvas Extent
使用当前地图视图范围
+
+ Used
+ 已用
+
+
+ Exclude composers
+ 排除版式
+
+
+ WFS capabilities
+
+
+ WCS capabilities
+
+
+ Exclude layers
+ 排除图层
+
+
+ Quality for JPEG images ( 10 : smaller image - 100 : best quality )
+
+
+ Published
+ 已发表
+
+
+ Update
+ 更新
+
+
+ Insert
+ 插入
+
+
+ Delete
+ 删除
+
+
+ Unselect all
+ 清除选择
+
+
+ Select all
+ 全选
+
宏
- Fees
- 费用
-
-
- Access constraints
- 访问限制
-
-
- Keyword list
- 关键字列表
-
-
- WMS capabilitities
- WMS性能
-
-
- Add geometry to feature response
-
-
- Exclude layers
- 排除图层
-
-
- Advertised URL
广播地址
- Width
宽度
- Height
高度
- Maximums for GetMap request
GetMap请求的最大值
- Advertised extent
广播范围
- CRS restrictions
坐标参照系限制
- Exclude composers
- 排除版式
-
-
- WFS capabilitities
- WFS性能
-
-
- Update
- 更新
-
-
- Insert
- 插入
-
-
- Delete
- 删除
-
-
- Unselect all
- 清除选择
-
-
- Select all
- 全选
-
-
- WCS capabilities
-
-
- Python macros
Python宏
-
- Coordinate Systems Restrictions
- 坐标系限制
-
-
- Add
- 添加
-
-
- Remove
- 移除
-
-
- Used
- 已用
-
-
- Add WKT geometry to feature info response
- 将WKT几何图形添加到要素信息响应
-
-
- Maximum width
- 宽度最大值
-
-
- Maximum height
- 高度最大值
-
-
- Published
- 已发表
-
-
- absolute
- 绝对路径
-
-
- relative
- 相对路径
-
-
- Save paths
- 保存路径
-
-
- Degrees, Minutes, Seconds
- 度、分、秒
-
QgsProjectionSelector
-
- All
- 所有
-
User Defined Coordinate Systems
@@ -49992,24 +41854,6 @@ Because of this the projection selector will not work...
QgsProjectionSelectorBase
-
- Authority ID
- 管理机构标识符
-
-
- Search
- 搜索
-
-
- Find
- 查找
-
-
- Name
- 名称
-
Coordinate Reference System Selector
@@ -50036,6 +41880,12 @@ Because of this the projection selector will not work...
Selected CRS:
选择坐标参照系：
+
+ Authority ID
+ 管理机构标识符
+
QgsQueryBuilder
+
+ &Test
+ 测试(&T)
+
+
+ &Clear
+ 清除(&C)
+
Set provider filter on %1
-
The where clause returned %n row(s).
returned test rows
-
- where子句返回%n行。
-
+ where子句返回%n行。
The subset string could not be set
不能设置子集字符串
-
- &Test
- 测试(&T)
-
-
- &Clear
- 清除(&C)
-
QgsQueryBuilderBase
@@ -50139,7 +41987,7 @@ The data provider said:
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -50155,7 +42003,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -50166,7 +42014,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -50182,7 +42030,7 @@ p, li { white-space: pre-wrap; }
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -50279,66 +42127,6 @@ p, li { white-space: pre-wrap; }
Provider specific filter expression
提供者过滤器表达式
-
- SQL where clause
- SQL where子句
-
-
-
- QgsQuickPrint
-
- km
- 公里
-
-
- mm
- 毫米
-
-
- cm
- 厘米
-
-
- m
- 米
-
-
- miles
- 英里
-
-
- mile
- 英里
-
-
- inches
- 英寸
-
-
- foot
- 英尺
-
-
- feet
- 英尺
-
-
- degree
- 度
-
-
- degrees
- 度
-
-
- unknown
- 未知
-
-
- Please wait while your report is generated
- COMMENTED OUT
- 请稍等，正在生成报告
-
QgsRangeConfigDlg
@@ -50346,29 +42134,29 @@ p, li { white-space: pre-wrap; }
Editable
- 可编辑
+
Slider
- 滑块
+
Dial
-
Current minimum for this value is %1 and current maximum is %2.
- 该值当前最小为%1，最大为%2。
+
Attribute has no integer or real type, therefore range is not usable.
- 属性不是整型或实型，因此范围无法使用。
+
@@ -50376,32 +42164,32 @@ p, li { white-space: pre-wrap; }
Form
- 窗体
+
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
- 允许人们在指定的范围内设置数值。该编辑控件可以是一个滑块或旋钮。
+
Step
- 步长
+
Maximum
-
Minimum
-
Local minimum/maximum = 0/0
- 本地最小值/最大值=0/0
+
@@ -50612,51 +42400,11 @@ p, li { white-space: pre-wrap; }
QgsRasterDataProvider
-
- Identify
- 识别要素
-
-
- Band
- 波段
-
Format not supported
不受支持的格式
-
- no data
- 无数据值
-
-
- Feature info
- 要素信息
-
-
- Average
- 平均值
-
-
- Nearest Neighbour
- 近邻取样
-
-
- Gauss
- 高斯
-
-
- Cubic
- 立方卷积
-
-
- Mode
- 模式
-
-
- None
- 无
-
Value
@@ -50709,6 +42457,21 @@ p, li { white-space: pre-wrap; }
JPEG compression
JPEG压缩
+
+ Cannot get create options for driver %1
+ 驱动%1无法获得创建选项
+
+
+ For details on pyramids options please see the following pages
+ 关于金字塔选项的详细信息，请查看以下页面
+
+
+ No help available
+ 没有可用的帮助
+
cannot validate pyramid options
@@ -50719,6 +42482,11 @@ p, li { white-space: pre-wrap; }
Cannot validate creation options
无法验证创建选项
+
+ Valid
+ 有效
+
Invalid %1:
@@ -50742,26 +42510,6 @@ Click on help button to get valid creation options for this format.
creation option
创建选项
-
- Cannot get create options for driver %1
- 驱动%1无法获得创建选项
-
-
- For details on pyramids options please see the following pages
- 关于金字塔选项的详细信息，请查看以下页面
-
-
- No help available
- 没有可用的帮助
-
-
- Valid
- 有效
-
Profile name:
@@ -50849,8 +42597,24 @@ Click on help button to get valid creation options for this format.
可见性
- Show min/max markers
- 显示最小/最大值标记
+ Min/Max options
+ 最小值/最大值选项
+
+
+ Always show min/max markers
+ 总是显示最大最小值标记
+
+
+ Zoom to min/max
+ 缩放到最大最小值
+
+
+ Update style to min/max
+ 更新样式到最大最小值
Display
- 显示
+
Draw as lines
-
Draw as lines (only int layers)
-
Actions
动作
+
+ Reset
+ 重置
+
Load min/max
@@ -50917,31 +42686,6 @@ Click on help button to get valid creation options for this format.
Use stddev (custom)
使用标准偏差（自定义）
-
- Reset
- 重置
-
-
- Min/Max options
- 最小值/最大值选项
-
-
- Always show min/max markers
- 总是显示最大最小值标记
-
-
- Zoom to min/max
- 缩放到最大最小值
-
-
- Update style to min/max
- 更新样式到最大最小值
-
Load for each band
@@ -50972,10 +42716,6 @@ Click on help button to get valid creation options for this format.
Form
窗体
-
- Band
- 波段
-
Set min/max style for
@@ -51066,8 +42806,9 @@ Click on help button to get valid creation options for this format.
未设置
- Could not reproject view extent: %1
- 无法重新投影视图范围：%1
+ QgsRasterLayer created
+ QgsRasterLayer已创建
栅格
- Driver:
- 驱动：
+ No Data Value
+ 无数据值
- Dimensions:
- 尺寸:
-
-
- Data Type:
- 数据类型:
-
-
- GDT_Byte - Eight bit unsigned integer
- GDT_Byte - 8位无符号整型
-
-
- GDT_UInt16 - Sixteen bit unsigned integer
- GDT_UInt16 - 16位无符号整型
-
-
- GDT_Int16 - Sixteen bit signed integer
- GDT_Int16 - 16位有符号整型
-
-
- GDT_UInt32 - Thirty two bit unsigned integer
- GDT_UInt32 - 32位无符号整型
-
-
- GDT_Int32 - Thirty two bit signed integer
- GDT_Int32 - 32位有符号整型
-
-
- GDT_Float32 - Thirty two bit floating point
- GDT_Float32 - 32位浮点型
-
-
- GDT_Float64 - Sixty four bit floating point
- GDT_Float64 - 64位浮点型
-
-
- GDT_CInt16 - Complex Int16
- GDT_CInt16 - Complex Int16
-
-
- GDT_CInt32 - Complex Int32
- GDT_CInt32 - Complex Int32
-
-
- GDT_CFloat32 - Complex Float32
- GDT_CFloat32 - Complex Float32
-
-
- GDT_CFloat64 - Complex Float64
- GDT_CFloat64 - Complex Float64
+ NoDataValue not set
+ 未设定无数据值
Could not determine raster data type.
无法确定栅格数据的类型.
-
- Pyramid overviews:
- 金字塔概貌：
-
-
- Cannot instantiate the '%1' data provider
- 无法实例化“%1”数据源
-
-
- Provider is not valid (provider: %1, URI: %2
- 数据源无效（数据源：%1，URI：%2
-
-
- Failed to load provider %1 (Reason: %2)
- 载入数据源%1失败（原因：%2）
-
-
- Cannot instantiate the data provider
- 无法实例化数据源
-
-
- <maplayer> not found.
- 未找到<maplayer>。
-
-
- GDAL data type %1 is not supported
- 不支持GDAL数据类型%1
-
-
- Origin:
- 起点:
-
-
- Pixel Size:
- 像素大小:
-
Driver
@@ -51320,147 +42976,33 @@ Click on help button to get valid creation options for this format.
像元数量
- Average
- 平均值
+ Cannot instantiate the '%1' data provider
+ 无法实例化“%1”数据源
- Layer Spatial Reference System:
- 图层的空间参考系统:
+ Provider is not valid (provider: %1, URI: %2
+ 数据源无效（数据源：%1，URI：%2
- Layer Extent (layer original source projection):
- 图层范围（图层的原始源投影）：
-
-
- Project Spatial Reference System:
- 项目的空间参考系统：
-
-
- out of extent
- 超出范围
-
-
- null (no data)
- 空值(no data)
-
-
- Dataset Description
- 数据集描述
-
-
- No Data Value
- 无数据值
-
-
- NoDataValue not set
- 未设定无数据值
-
-
- QgsRasterLayer created
- QgsRasterLayer已创建
-
-
- Retrieving stats for %1
- 正在检索%1的统计信息
+ <maplayer> not found.
+ 未找到<maplayer>。
QgsRasterLayerProperties
-
- Grayscale
- 灰阶
-
-
- Pseudocolor
- 伪彩色
-
-
- Freak Out
- 反常
-
Not Set
未设置
-
- Columns:
- 列数：
-
-
- Rows:
- 行数：
-
-
- No-Data Value:
- 无数据值：
-
-
- n/a
- n/a
-
-
- Write access denied
- 写入访问被拒绝
-
-
- Write access denied. Adjust the file permissions and try again.
-
-
- 写入访问被拒绝。请调整文件权限再重试。
-
-
-
-
- Building pyramids failed.
- 构建金字塔失败。
-
-
- Building pyramid overviews is not supported on this type of raster.
- 此类栅格不支构建金字塔概貌。
-
-
- Clip To MinMax
- 裁剪到最大最小值
-
Description
描述
-
- Value
- 值
-
-
- Color
- 颜色
-
-
- Label
- 标签
-
Large resolution raster layers can slow navigation in QGIS.
@@ -51476,6 +43018,16 @@ Click on help button to get valid creation options for this format.
You must have write access in the directory where the original data is stored to build pyramids.
你必须有原始数据所在目录的写入权限方可构建金字塔。
+
+ Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
+ 请注意，构建内建金字塔会修改原始数据文件。一旦金字塔构建完成，便再也不能移除！
+
+
+ Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
+ 请注意，构建内建金字塔有可能会损坏你的位图影像——请务必先备份你的数据！
+
Layer Properties - %1
@@ -51547,20 +43099,93 @@ Click on help button to get valid creation options for this format.
索引值
- Filter
- 过滤
+ From
+ 从
- Bands
- 波段
+ To
+ 到
- Time
- 时间
+ not defined
+ 未定义
- No-Data Value: Not Set
- 无数据值：未设置
+ Columns: %1
+ 列数：%1
+
+
+ Rows: %1
+ 行数：%1
+
+
+ Columns:
+ 列数：
+
+
+ n/a
+ n/a
+
+
+ Rows:
+ 行数：
+
+
+ No-Data Value:
+ 无数据值：
+
+
+ No-Data Value: %1
+ 无数据值：%1
+
+
+ Write access denied
+ 写入访问被拒绝
+
+
+ Write access denied. Adjust the file permissions and try again.
+ 写入访问被拒绝。请调整文件权限再重试。
+
+
+ Building pyramids failed.
+ 构建金字塔失败。
+
+
+ The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
+ 该文件不可写。一些格式不支持金字塔概貌。如有疑问请查阅GDAL文档。
+
+
+ Building pyramid overviews is not supported on this type of raster.
+ 此类栅格不支构建金字塔概貌。
+
+
+ Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
+ 用JPEG压缩的栅格图层和当前的libtiff库不支持构建内建金字塔概貌。
保存文件
- Save layer properties as style file
- 将图层属性保存为样式文件
+ Textfile
+ 文本文件
QGIS生成的透明像素值导出文件
- Band %1
- 波段%1
+ Value
+ 值
- Choose a file name to save the map image as
- 选择一个文件名以保存地图位图文件
+ Write access denied. Adjust the file permissions and try again.
+
+
+ 写入访问被拒绝。请调整文件权限再重试。
+
+
导入错误
- out of extent
- 超出范围
+ The following lines contained errors
+
+%1
+ 以下各行包含的错误
+
+%1
Default Style
默认样式
-
- Linear
- 线性
-
-
- Please note that building internal pyramids may alter the original data file and once created they cannot be removed!
- 请注意，构建内建金字塔会修改原始数据文件。一旦金字塔构建完成，便再也不能移除！
-
-
- Please note that building internal pyramids could corrupt your image - always make a backup of your data first!
- 请注意，构建内建金字塔有可能会损坏你的位图影像——请务必先备份你的数据！
-
-
- From
- 从
-
-
- To
- 到
-
-
- not defined
- 未定义
-
-
- The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
- 该文件不可写。一些格式不支持金字塔概貌。如有疑问请查阅GDAL文档。
-
Load layer properties from style file
@@ -51671,59 +43274,9 @@ Click on help button to get valid creation options for this format.
保存样式
- <h3>Multiband Image Notes</h3><p>This is a multiband image. You can choose to render it as grayscale or color (RGB). For color images, you can associate bands to colors arbitarily. For example, if you have a seven band landsat image, you may choose to render it as:</p><ul><li>Visible Blue (0.45 to 0.52 microns) - not mapped</li><li>Visible Green (0.52 to 0.60 microns) - not mapped</li></li>Visible Red (0.63 to 0.69 microns) - mapped to red in image</li><li>Near Infrared (0.76 to 0.90 microns) - mapped to green in image</li><li>Mid Infrared (1.55 to 1.75 microns) - not mapped</li><li>Thermal Infrared (10.4 to 12.5 microns) - not mapped</li><li>Mid Infrared (2.08 to 2.35 microns) - mapped to blue in image</li></ul>
- COMMENTED OUT
- <h3>多波段位图注释</h3><p>这是一个多波段位图。您可以将它着色为灰度或彩色(RGB)。对于彩色位图，您可以为每个波段关联任意的颜色。比如有一个七波段的landsat位图，您可以这样着色：</p><ul><li>可见蓝光 (0.45到0.52微米) - 未映射</li><li>可见绿光(0.52到0.60微米) - 未映射</li></li>可见红光(0.63到0.69微米) - 映射为红色</li><li>近红外(0.76到0.90微米) - 映射为绿色</li><li>中红外(1.55到1.75微米) - 未映射</li><li>热红外(10.4到12.5微米) - 未映射</li><li>中红外(2.08到2.35微米) - 映射为蓝色</li></ul>
-
-
- <h3>Paletted Image Notes</h3> <p>This image uses a fixed color palette. You can remap these colors in different combinations e.g.</p><ul><li>Red - blue in image</li><li>Green - blue in image</li><li>Blue - green in image</li></ul>
- COMMENTED OUT
- <h3>调色板位图注释</h3> <p>这个位图使用了一个固定的调色板。您可以将这些颜色重新映射为不同的组合。如</p><ul><li>红色 - 映射为蓝色</li><li>绿色 - 映射为蓝色</li><li>蓝色 - 映射为绿色</li></ul>
-
-
- <h3>Grayscale Image Notes</h3> <p>You can remap these grayscale colors to a pseudocolor image using an automatically generated color ramp.</p>
- COMMENTED OUT
- <h3>灰度位图注释</h3> <p>您可以将灰度重新映射为伪彩色，使用一个自动生成的色阶。</p>
-
-
- Columns: %1
- 列数：%1
-
-
- Rows: %1
- 行数：%1
-
-
- No-Data Value: %1
- 无数据值：%1
-
-
- Write access denied. Adjust the file permissions and try again.
- 写入访问被拒绝。请调整文件权限再重试。
-
-
- Textfile
- 文本文件
-
-
- The following lines contained errors
-
-%1
- 以下各行包含的错误
-
-%1
-
-
- Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
- 用JPEG压缩的栅格图层和当前的libtiff库不支持构建内建金字塔概貌。
+ Save layer properties as style file
+ 将图层属性保存为样式文件
@@ -51734,59 +43287,62 @@ Click on help button to get valid creation options for this format.
栅格图层属性
- Symbology
- 符号化
+ Save Style ...
+ 保存样式...
- <p align="right">Full</p>
- <p align="right">完全透明</p>
+ Load Style ...
+ 载入样式...
- None
- 不透明
+ Resolutions
+ 分辨率
+
+
+ Save As Default
+ 保存并设为默认
+
+
+ Restore Default Style
+ 恢复默认样式
+
+
+ Render type
+ 渲染类型
+
+
+ Resampling
+ 重采样
+
+
+ Oversampling
+ 过采样
+
+
+ Transparency
+ 透明度
+
+
+ Style
+ 样式
Layer info
图层信息
-
- displayed as
- 显示为
-
-
- Layer name
- 图层名称
-
-
- Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
- 最小比例尺，例如最大比例尺分母。该限制具有排除性，意味着在此比例尺下图层将不被显示出来。
-
-
- <html><head/><body><p align="center"><span style=" font-size:0.75em;">Minimum<br>(exclusive)</span></p></body></html>
- <html><head/><body><p align="center"><span style=" font-size:0.75em;">最小<br>（排除性）</span></p></body></html>
-
-
- Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
- 最大比例尺，例如最小比例尺分母。该限制具有包含性，意味着在此比例尺下图层将被显示出来。
-
-
- <html><head/><body><p align="center"><span style=" font-size:0.75em;">Maximum<br>(inclusive)</span></p></body></html>
- <html><head/><body><p align="center"><span style=" font-size:0.75em;">最大<br>（包含性）</span></p></body></html>
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
-
Description
@@ -51797,6 +43353,13 @@ p, li { white-space: pre-wrap; }
Keyword list
关键字列表
+
+ Format
+ 格式
+
Attribution
@@ -51820,11 +43383,24 @@ p, li { white-space: pre-wrap; }
类型
- Format
- 格式
+ LegendUrl
+
+
+ image/png
+
+
+ image/jpeg
+
+
+ image/jpg
+
缩小
- Oversampling
- 过采样
+ Global transparency
+ 全局透明度
+
+
+ None
+ 不透明
+
+
+ 00%
+ 00%
+
+
+ <p align="right">Full</p>
+ <p align="right">完全透明</p>
+
+
+ No data value
+ 无数据值
Additional no data value
附加的无数据值
-
- General
- 通用
-
-
- Thumbnail
- 缩略图
-
-
- Metadata
- 元数据
-
-
- Pyramids
- 金字塔
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:9pt; font-weight:400; font-style:normal;">
-<table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;">
-<tr>
-<td style="border: none;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:11pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"><br /></p></td></tr></table></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:9pt; font-weight:400; font-style:normal;">
-<table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;">
-<tr>
-<td style="border: none;">
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:11pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans'; font-size:10pt;"><br /></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"><br /></p></td></tr></table></body></html>
-
-
- Average
- 平均值
-
-
- Nearest Neighbour
- 近邻取样
-
-
- Overview format
- 鹰眼图格式
-
-
- External
- 外部
-
-
- Resolutions
- 分辨率
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell'; font-size:11pt;"><br /></span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell'; font-size:11pt;"><br /></span></p></body></html>
-
-
- Internal (if possible)
- 内建（若可能的话）
-
-
- External (Erdas Imagine)
- 外部（Erdas Imagine）
-
-
- Histogram
- 柱状图
-
-
- Options
- 选项
-
-
- Chart Type
- 图表类型
-
-
- Refresh
- 刷新
-
-
- Max
- 最大值
-
-
- Min
- 最小值
-
-
- 00%
- 00%
-
-
- Render as
- 渲染为
-
-
- ...
- ...
-
-
- Colormap
- 颜色表
-
-
- Delete entry
- 删除条目
-
-
- Classify
- 分类
-
-
- 1
- 1
-
-
- 2
- 2
-
-
- Single band gray
- 单波段灰度
-
-
- Style
- 样式
-
-
- Three band color
- 三波段彩色
-
-
- RGB mode band selection and scaling
- RGB模式的波段选择和缩放
-
-
- Red band
- 红色波段
-
-
- Green band
- 绿色波段
-
-
- Blue band
- 蓝色波段
-
-
- Custom min / max values
- 自定义最小值和最大值
-
-
- Red min
- 红色最小值
-
-
- Red max
- 红色最大值
-
-
- Green min
- 绿色最小值
-
-
- Green max
- 绿色最大值
-
-
- Blue min
- 蓝色最小值
-
-
- Blue max
- 蓝色最大值
-
-
- Single band properties
- 单波段属性
-
-
- Gray band
- 灰度波段
-
-
- Color map
- 颜色表
-
-
- Use standard deviation
- 使用标准偏差
-
-
- Load
- 载入
-
-
- Contrast enhancement
- 对比度增强
-
-
- Current
- 当前
-
-
- Default
- 默认
-
-
- TextLabel
- 文本标签
-
-
- Title
- 标题
-
-
- Abstract
- 摘要
-
-
- Save as image...
- 另存为位图...
-
-
- Transparency
- 透明度
-
-
- Global transparency
- 全局透明度
-
-
- No data value
- 无数据值
-
Custom transparency options
自定义透明度选项
-
- Style
- mRendererTab
- 样式
-
-
- Render type
- 渲染类型
-
-
- Resampling
- 重采样
-
-
- Zoomed in
- 放大
-
-
- Zoomed out
- 缩小
-
-
- Maximum oversampling
- 最大过采样
-
Transparency band
透明波段
+
+ Add values from display
+ 从显示添加值
+
Transparent pixel list
@@ -52330,8 +43584,14 @@ p, li { white-space: pre-wrap; }
手动添加值
- Add Values from display
- 从显示添加值
+ ...
+ ...
导出到文件
- Reset to file defined null
- 重设为文件定义的空值
+ General
+ 通用
- Number of entries
- 条目数量
+ Layer name
+ 图层名称
- Color interpolation
- 颜色插值
-
-
- Classification mode
- 分类模式
-
-
- Scale dependent visibility
- 依赖于地图比例尺的可见性
-
-
- Maximum
- 最大比例尺
-
-
- Minimum
- 最小比例尺
+ displayed as
+ 显示为
Layer source
图层的数据源
-
- Display name
- 显示名称
-
-
- Pyramid resolutions
- 金字塔分辨率
-
-
- Resampling method
- 重采样方法
-
-
- Build pyramids
- 构建金字塔
-
-
- Pipe
- 管道
-
-
- Restore Default Style
- 恢复默认样式
-
-
- Save As Default
- 保存并设为默认
-
-
- Add values from display
- 从显示添加值
-
-
- LegendUrl
-
-
- image/png
-
-
- image/jpeg
-
-
- image/jpg
-
-
- Load Style ...
- 载入样式...
-
-
- Save Style ...
- 保存样式...
-
-
- Default R:1 G:2 B:3
- 默认 R:1 G:2 B:3
-
-
- Add entry
- 添加条目
-
-
- Sort
- 排序
-
Columns
@@ -52481,29 +43649,16 @@ p, li { white-space: pre-wrap; }
No Data
无数据值
+
+ Scale dependent visibility
+ 依赖于地图比例尺的可见性
+
Coordinate reference system
坐标参照系
-
- Legend
- 图例
-
-
- Palette
- 调色板
-
-
- Notes
- 注
-
-
- Build pyramids internally if possible
- 如果可能的话，构建内建金字塔
-
指定...
- Current extent
- 当前范围
+ Thumbnail
+ 缩略图
+
+
+ Legend
+ 图例
+
+
+ Palette
+ 调色板
+
+
+ Metadata
+ 元数据
+
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
+
+
+ Title
+ 标题
+
+
+ Abstract
+ 摘要
+
+
+ Pyramids
+ 金字塔
+
+
+ Average
+ 平均值
+
+
+ Nearest Neighbour
+ 近邻取样
+
+
+ Build pyramids
+ 构建金字塔
+
+
+ Resampling method
+ 重采样方法
+
+
+ Overview format
+ 鹰眼图格式
+
+
+ External
+ 外部
+
+
+ Internal (if possible)
+ 内建（若可能的话）
+
+
+ External (Erdas Imagine)
+ 外部（Erdas Imagine）
+
+
+ Histogram
+ 柱状图
@@ -52572,14 +43816,6 @@ p, li { white-space: pre-wrap; }
Resolution (current: %1)
分辨率（当前：%1）
-
- map view
- 地图视图
-
-
- Extent (current: %1)
- 范围（当前：%1）
-
Layer (%1, %2)
@@ -52640,6 +43876,11 @@ datasets with maximum width and height specified below.
创建包含多个数据集的GDAL虚拟格式。
每个数据集的最大宽度和最大高度在下面指定。
+
+ Create VRT
+ 创建VRT
+
Save as
@@ -52665,30 +43906,6 @@ datasets with maximum width and height specified below.
Extent
范围
-
- West
- 西
-
-
- East
- 东
-
-
- North
- 北
-
-
- South
- 南
-
-
- Layer extent
- 图层范围
-
-
- Map view extent
- 地图视图范围
-
Resolution
@@ -52729,11 +43946,6 @@ datasets with maximum width and height specified below.
VRT Tiles
VRT 瓦片
-
- Create Options
- 创建选项
-
最大行数
- Create VRT
- 创建VRT
+ Create Options
+ 创建选项
+
+
+ Pyramids
+ 金字塔
+
+
+ Resolutions
+ 分辨率
+
+
+ Pyramid resolutions corresponding to levels given
+ 与层数对应的金字塔影像分辨率
+
+
+ Use existing
+ 使用既有
Clear all
全部清除
-
- Pyramids
- 金字塔
-
-
- Resolutions
- 分辨率
-
-
- Pyramid resolutions corresponding to levels given
- 与层数对应的金字塔影像分辨率
-
-
- Use existing
- 使用既有
-
QgsRasterMinMaxWidget
No option selected
-
Please select an option to load min/max values.
-
@@ -52894,7 +44106,7 @@ datasets with maximum width and height specified below.
Cumulative
count cut
-
Form
窗体
-
- Custom levels
- 自定义层数
-
-
- Internal (if possible)
- 内建（若可能的话）
-
Insert positive integer values separated by spaces
@@ -52936,11 +44138,31 @@ standard deviation ×
External (GTiff .ovr)
外部（GTiff .ovr）
+
+ Internal (if possible)
+ 内建（若可能的话）
+
External (Erdas Imagine .aux)
外部（Erdas Imagine .aux）
+
+ Levels
+ 层数
+
+
+ Create Options
+ 创建选项
+
+
+ Resampling method
+ 重采样方法
+
Average
@@ -52951,26 +44173,16 @@ standard deviation ×
Nearest Neighbour
近邻取样
+
+ Custom levels
+ 自定义层数
+
Overview format
鹰眼图格式
-
- Create Options
- 创建选项
-
-
- Levels
- 层数
-
-
- Resampling method
- 重采样方法
-
QgsRasterRenderer
@@ -53025,10 +44237,6 @@ standard deviation ×
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
%3范围内的%1 %2.
-
- of
- of
-
QgsRasterTerrainAnalysisDialog
@@ -53106,11 +44314,21 @@ standard deviation ×
Elevation layer
高程图层
+
+ Output layer
+ 输出图层
+
...
...
+
+ Output format
+ 输出格式
+
Z factor
@@ -53196,16 +44414,6 @@ standard deviation ×
Import colors...
导入颜色...
-
- Output layer
- 输出图层
-
-
- Output format
- 输出格式
-
QgsRasterTerrainAnalysisPlugin
@@ -53288,7 +44496,7 @@ standard deviation ×
Preview Expression
-
@@ -53296,32 +44504,32 @@ standard deviation ×
Dialog
- 对话框
+
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -53329,19 +44537,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -53349,49 +44557,45 @@ standard deviation ×
[Generated automatically]
-
QgsRelationAddDlgBase
-
- Dialog
- 对话框
-
Add relation
- 添加关系
+
Referencing Field
-
Referenced Layer (Parent)
-
Referenced Field
-
Referencing Layer (Child)
-
Name
- 名称
+
Id
-
@@ -53399,43 +44603,43 @@ standard deviation ×
Form
- 窗体
+
Toggle editing
-
New
-
Delete
- 删除
+
Link
-
Unlink
-
Form View
-
Table View
- 表格视图
+
@@ -53443,47 +44647,47 @@ standard deviation ×
Dialog
- 对话框
+
Name
- 名称
+
Referencing Layer
-
Referencing Field
-
Referenced Layer
-
Referenced Field
-
Id
-
Add Relation
-
Remove Relation
-
@@ -53491,17 +44695,17 @@ standard deviation ×
Open Form
-
(no selection)
- （未选择）
+
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -53542,18 +44746,6 @@ standard deviation ×
Scale range
比例尺范围
-
- Min. scale
- 最小比例尺
-
-
- 1 :
- 1 :
-
-
- Max. scale
- 最大比例尺
-
Symbol
@@ -53579,9 +44771,7 @@ standard deviation ×
Filter returned %n feature(s)
number of filtered features
-
- 过滤后返回%n个要素
-
+ 过滤后返回%n个要素
@@ -53618,7 +44808,7 @@ standard deviation ×
- expression -
-
- 无字段 -
-
- QgsRendererV2PropertiesDialog
-
- Symbology
- 符号化
-
-
- Do you wish to use the original symbology implementation for this layer?
- 你想在该图层使用旧式符号吗？
-
-
QgsRendererV2PropsDialogBase
@@ -53666,14 +44845,6 @@ standard deviation ×
Layer blending mode
图层混合模式
-
- Blending mode
- 混合模式
-
-
- Old symbology
- 旧式符号
-
This renderer doesn't implement a graphical interface.
@@ -53685,12 +44856,12 @@ standard deviation ×
Copy
- 复制
+
Paste
- 粘帖
+
Min. scale
最小比例尺
-
- Max.scale
- 最大比例尺
-
Count
@@ -53828,14 +44995,6 @@ standard deviation ×
QgsRuleBasedRendererV2Widget
-
- Label
- 标签
-
-
- Add
- 添加
-
Add rule
@@ -53851,6 +45010,11 @@ standard deviation ×
Remove rule
移除规则
+
+ Refine current rules
+ 完善当前规则
+
Count features
@@ -53861,23 +45025,10 @@ standard deviation ×
Rendering order...
停止顺序...
-
- Edit
- 编辑
-
-
- Remove
- 移除
-
-
- Refine current rules
- 完善当前规则
-
Remove Rule
-
QgsRunProcess
- Done
- 完成
+ <b>Starting %1...</b>
+ <b>正在启动%1...</b>
Action
动作
-
- <b>Starting %1...</b>
- <b>正在启动%1...</b>
-
Unable to run command
@@ -53970,6 +45116,11 @@ standard deviation ×
无法执行命令
%1
+
+ Done
+ 完成
+
Unable to run command %1
@@ -54057,6 +45208,11 @@ standard deviation ×
QgsSLRootItem
+
+ New Connection...
+ 新建连接...
+
Create database...
@@ -54067,11 +45223,6 @@ standard deviation ×
New SpatiaLite Database File
新建SpatiaLite数据库文件
-
- New Connection...
- 新建连接...
-
SpatiaLite
@@ -54095,54 +45246,8 @@ standard deviation ×
创建数据库失败：
-
- QgsSVGDiagramFactoryWidget
-
- Select svg file
- 选择SVG文件
-
-
- Select new preview directory
- 选择新的预览目录
-
-
- Creating icon for file %1
- 正在为文件%1创建图标
-
-
-
- QgsSVGDiagramFactoryWidgetBase
-
- Form
- 窗体
-
-
- Search directories
- 搜索目录
-
-
- Add...
- 添加...
-
-
- Remove
- 移除
-
-
- SVG Preview
- SVG预览
-
-
- ...
- ...
-
-
QgsSVGFillSymbolLayerWidget
-
- Select svg texture file
- 选择SVG纹理文件
-
Texture width
@@ -54158,23 +45263,23 @@ standard deviation ×
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Select SVG texture file
-
All files
- 全部文件
+
QgsSaveToDBDialog
-
- Add column
- 添加字段
-
Save style
@@ -54272,173 +45373,35 @@ standard deviation ×
（可选）选择一个输入表单以编辑属性（Qt设计器用户界面格式），将保存到数据库中
-
- QgsScaleBarPlugin
-
- metres/km
- 米/千米
-
-
- feet
- 英尺
-
-
- degrees
- 度
-
-
- km
- 千米
-
-
- mm
- 毫米
-
-
- cm
- 厘米
-
-
- m
- 米
-
-
- foot
- 英尺
-
-
- degree
- 度
-
-
- unknown
- 未知
-
-
- Top Left
- 左上
-
-
- Bottom Left
- 左下
-
-
- Top Right
- 右上
-
-
- Bottom Right
- 右下
-
-
- Tick Down
- 开口向下
-
-
- Tick Up
- 开口向上
-
-
- Bar
- 条状
-
-
- Box
- 矩形框
-
-
- &Decorations
- 装饰 (&D)
-
-
- Creates a scale bar that is displayed on the map canvas
- 在地图视图中创建一个比例尺
-
-
-
- QgsScaleBarPluginGuiBase
-
- Scale Bar Plugin
- 比例尺插件
-
-
- Top Left
- 左上
-
-
- Top Right
- 右上
-
-
- Bottom Left
- 左下
-
-
- Bottom Right
- 右下
-
-
- Tick Down
- 开口向下
-
-
- Tick Up
- 开口向上
-
-
- Box
- 矩形框
-
-
- Bar
- 条状
-
-
- Select the style of the scale bar
- 选择比例尺样式
-
-
- Enable scale bar
- 显示比例尺
-
-
- Automatically snap to round number on resize
- 刻度取整
-
-
- Placement
- 位置
-
-
QgsScaleRangeWidget
Minimum
(exclusive)
-
Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
- 最小比例尺，例如最大比例尺分母。该限制具有排除性，意味着在此比例尺下图层将不被显示出来。
+
Maximum
(inclusive)
-
Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
- 最大比例尺，例如最小比例尺分母。该限制具有包含性，意味着在此比例尺下图层将被显示出来。
+
current
-
@@ -54446,32 +45409,11 @@ standard deviation ×
Scale visibility
-
QgsSearchQueryBuilder
-
- Search results
- 搜索结果
-
-
- Search string parsing error
- 搜索字符串解析错误
-
-
- No Records
- 没有记录
-
-
- The query you specified results in zero records being returned.
- 您指定的查询没有返回任何记录。
-
Search query builder
@@ -54507,13 +45449,22 @@ standard deviation ×
Load query from xml file
从xml文件载入查询
+
+ Search results
+ 搜索结果
+
Found %n matching feature(s).
test result
-
- 找到%n个匹配的要素。
-
+ 找到%n个匹配的要素。
+
+ Search string parsing error
+ 搜索字符串解析错误
Error during search
搜索时出错
+
+ No Records
+ 没有记录
+
+
+ The query you specified results in zero records being returned.
+ 您指定的查询没有返回任何记录。
+
Save query to file
@@ -54595,9 +45556,7 @@ standard deviation ×
Validation finished (%n error(s) found).
number of geometry errors
-
- 校验完成（找到%n个错误）。
-
+ 校验完成（找到%n个错误）。
QgsShapeFile
-
- The database gave an error while executing this SQL:
- 执行该SQL语句时数据库返回了一个错误消息：
-
-
- ... (rest of SQL trimmed)
- is appended to a truncated SQL statement
- ... (rest of SQL trimmed)
-
Scanning
@@ -54662,6 +45610,17 @@ The error was:
错误为：
%2
+
+ The database gave an error while executing this SQL:
+ 执行该SQL语句时数据库返回了一个错误消息：
+
+
+ ... (rest of SQL trimmed)
+ is appended to a truncated SQL statement
+ ... (rest of SQL trimmed)
+
The error was:
@@ -54677,48 +45636,48 @@ The error was:
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Color (start)
-
Color (end)
-
Blur radius
- 模糊半径
+
Integer between 0 and 18
-
Use whole shape
-
Maximum distance
-
Ignore rings
-
@@ -54727,13 +45686,13 @@ The error was:
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Outline width
轮廓宽度
-
- Size
- 大小
-
Angle
@@ -54851,12 +45806,12 @@ The error was:
Horizontal anchor point
-
Vertical anchor point
-
@@ -54900,44 +45855,16 @@ The error was:
窗体
- Load min-/max values
- 载入最大值和最小值
-
-
- Estimate (faster)
- 估计（较快）
-
-
- Actual (slower)
- 实际（较慢）
-
-
- CurrentExtent
- 当前范围
-
-
- Use standard deviation
- 使用标准偏差
-
-
- Load
- 载入
+ Contrast
+enhancement
+ 对比度增强
Gray band
灰度波段
-
- Contrast enhancement
- 对比度增强
-
-
- Contrast
-enhancement
- 对比度增强
-
Min
@@ -55089,21 +46016,9 @@ enhancement
颜色插值
- Add entry
- 添加条目
-
-
- Delete entry
- 删除条目
-
-
- Sort
- 排序
-
-
- Load color map from band
- 从波段载入颜色表
+ Add values manually
+ 手动添加值
...
...
-
- Add values manually
- 手动添加值
-
Remove selected row
@@ -55130,6 +46040,11 @@ enhancement
Sort colormap items
对颜色表条目排序
+
+ Load color map from band
+ 从波段载入颜色表
+
Load color map from file
@@ -55166,9 +46081,9 @@ enhancement
生成新的颜色表
- Invert
- 反转
+ Mode
+ 模式
最大值
- Min / Max origin
- 最小 / 最大 原点
+ Invert
+ 反转
+
+
+ Classify
+ 分类
最小 / 最大 原点：
- Mode
- 模式
-
-
- Color ramp
- 颜色渐变
-
-
- Number of entries
- 条目数量
-
-
- Classification mode
- 分类模式
-
-
- Classify
- 分类
-
-
-
- QgsSingleSymbolDialog
-
- Refresh markers
- 刷新标记
-
-
- None
- 不透明
-
-
- Open File
- 打开文件
-
-
- Images
- 位图
-
-
-
- QgsSingleSymbolDialogBase
-
- Single Symbol
- 单一符号
-
-
- Size
- 大小
-
-
- Symbol
- 符号
-
-
- ...
- ...
-
-
- Point Symbol
- 点符号
-
-
- Label
- 标签
-
-
- In map units
- 地图单位
-
-
- Drawing by field
- 按字段来绘制
-
-
- Rotation
- 旋转角度
-
-
- Fill options
- 填充选项
-
-
- Outline options
- 轮廓选项
-
-
- Width
- 宽度
+ Min / Max origin
+ 最小 / 最大 原点
@@ -55435,11 +46268,6 @@ enhancement
Snapping options
对齐选项
-
- Enable topological editing
- 启用拓扑编辑
-
Layer
@@ -55470,6 +46298,11 @@ enhancement
Avoid intersections of new polygons
避免新多边形相交
+
+ Enable topological editing
+ 启用拓扑编辑
+
Enable snapping on intersection
@@ -55549,16 +46382,16 @@ enhancement
QgsSpatiaLiteProvider
-
- Text
- 文本
-
Binary object (BLOB)
二进制对象（BLOB）
+
+ Text
+ 文本
+
Decimal number (double)
@@ -55574,6 +46407,32 @@ enhancement
Retrieval of spatialite version failed
检索spatialite版本失败
+
+ SpatiaLite
+ SpatiaLite
+
Could not parse spatialite version string '%1'
@@ -55610,32 +46469,6 @@ SQL: %1
SQLite错误：%2
SQL：%1
-
- SpatiaLite
- SpatiaLite
-
unknown cause
不明原因
-
- SQLite error getting feature: %1
- 获取要素时SQLite发生错误：%1
-
FAILURE: Field %1 not found.
@@ -55661,6 +46490,31 @@ SQL：%1
QgsSpatiaLiteSourceSelect
+
+ Add SpatiaLite Table(s)
+ 添加SpatiaLite表格
+
+
+ Databases
+ 数据库
+
+
+ &Update statistics
+ 更新统计(&U)
+
+
+ &Add
+ 添加(&A)
+
+
+ &Set Filter
+ 设置过滤(&S)
+
Error while updating internal statistics for: %1
为%1更新内建统计失败
+
+ @
+ @
+
+
+ Choose a SpatiaLite/SQLite DB to open
+ 选择一个SpatiaLite或SQLite数据库并打开
+
SpatiaLite DB
@@ -55748,12 +46612,32 @@ but implies better performance thereafter.
Error
- 错误
+
Cannot add connection '%1' : a connection with the same name already exists.
-
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+ 确定要移除连接%1及全部相关设置吗？
+
+
+ Confirm Delete
+ 确认删除
+
+
+ Select Table
+ 选择表格
+
+
+ You must select a table in order to add a Layer.
+ 要添加图层，你必须选择一个表格。
-
- SpatiaLite Error
- SpatiaLite错误
-
-
- Unexpected error when working with: %1
-
-%2
- 处理%1时发生了预想不到的错误
-
-%2
-
-
- Choose a SpatiaLite/SQLite DB to open
- 选择一个SpatiaLite或SQLite数据库并打开
-
-
- &Update statistics
- 更新统计(&U)
-
-
- &Set Filter
- 设置过滤(&S)
-
-
- Confirm Delete
- 确认删除
-
-
- Select Table
- 选择表格
-
-
- You must select a table in order to add a Layer.
- 要添加图层，你必须选择一个表格。
-
SpatiaLite getTableInfo Error
@@ -55834,52 +46674,18 @@ but implies better performance thereafter.
%2
- Are you sure you want to remove the %1 connection and all associated settings?
- 确定要移除连接%1及全部相关设置吗？
+ SpatiaLite Error
+ SpatiaLite错误
- Add SpatiaLite Table(s)
- 添加SpatiaLite表格
-
-
- Databases
- 数据库
-
-
- &Build Query
- 构建查询(&B)
-
-
- @
- @
-
-
- &Add
- 添加(&A)
-
-
-
- QgsSpatiaLiteSourceSelectBase
-
- Delete
- 删除
-
-
- New
- 新建
-
-
- Connect
- 连接
-
-
- Search
- 搜索
+ Unexpected error when working with: %1
+
+%2
+ 处理%1时发生了预想不到的错误
+
+%2
@@ -55937,44 +46743,22 @@ but implies better performance thereafter.
QgsSpatialQueryDialog
+
+ The spatial query requires at least two vector layers
+ 空间查询要求至少两个矢量图层
+
%n selected geometries
selected geometries
-
- %n个选中的要素
-
+ %n个选中的要素
Selected geometries
选中的几何图形
-
- < %1 >
- < %1 >
-
-
- %1 of %2
- 第%1，共%2
-
-
- all = %1
- 总数=%1
-
-
- Total
- 总计
-
-
- The spatial query requires at least two vector layers
- 空间查询要求至少两个矢量图层
-
%1)Query
@@ -55985,6 +46769,11 @@ but implies better performance thereafter.
Begin at %L1
始于%L1
+
+ < %1 >
+ < %1 >
+
Total of features = %1
@@ -56010,6 +46799,17 @@ but implies better performance thereafter.
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
对不起！只启用了这些数据源：OGR、POSTGRES和SPATIALITE。
+
+ %1 of %2
+ 第%1，共%2
+
+
+ all = %1
+ 总数=%1
+
%1 of %2(selected features)
@@ -56133,10 +46933,6 @@ CRS of map is %1.
%1 of %2 identified
识别了%1个，共%2个
-
- DEBUG
- 调试
-
QgsSpatialQueryDialogBase
@@ -56165,7 +46961,7 @@ CRS of map is %1.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -56184,6 +46980,11 @@ p, li { white-space: pre-wrap; }
Where the feature
当要素
+
+ Select the topological operation
+ 选择拓扑操作
+
Layer whose geometries will be used as reference by the topological operation
@@ -56194,6 +46995,24 @@ p, li { white-space: pre-wrap; }
Reference features of
参照要素；参照要素位于图层
+
+ Select the reference layer
+ 选择参照图层
+
+
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
+ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
+<html><head><meta name="qrichtext" content="1" /><style type="text/css">
+p, li { white-space: pre-wrap; }
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">勾选后操作将只考虑参照图层中选中的几何图形</span></p></body></html>
+
And use the result to
@@ -56215,6 +47034,11 @@ p, li { white-space: pre-wrap; }
Create layer with selected
由所选创建图层
+
+ Result feature ID's
+ 结果要素标识符的
+
Select one FID to identify geometry of feature
@@ -56230,49 +47054,21 @@ p, li { white-space: pre-wrap; }
Zoom to item
缩放到条目
+
+ Check to show log processing of query
+ 勾选后显示请求处理过程日志
+
Log messages
日志消息
-
- Select the reference layer
- 选择参照图层
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">勾选后操作将只考虑参照图层中选中的几何图形</span></p></body></html>
-
-
- Result feature ID's
- 结果要素标识符的
-
Run query or close the window
执行查询或关闭窗口
-
- Select the topological operation
- 选择拓扑操作
-
-
- Check to show log processing of query
- 勾选后显示请求处理过程日志
-
QgsSpatialQueryPlugin
@@ -56294,13 +47090,6 @@ p, li { white-space: pre-wrap; }
调试
-
- QgsSpatialiteSridsDialog
-
- Error
- 错误
-
-
QgsSpatialiteSridsDialogBase
@@ -56342,11 +47131,56 @@ p, li { white-space: pre-wrap; }
QgsSpit
+
+ File Name
+ 文件名称
+
+
+ Feature Class
+ 要素类
+
+
+ Features
+ 要素
+
+
+ DB Relation Name
+ 数据库关系名称
+
+
+ Schema
+ 模式
+
+
+ Are you sure you want to remove the [%1] connection and all associated settings?
+ 确定要移除连接[%1]及全部相关设置吗？
+
Confirm Delete
确认删除
+
+ Add Shapefiles
+ 添加shape文件
+
+
+ Shapefiles
+ shape文件
+
+
+ All files
+ 全部文件
+
The following Shapefile(s) could not be loaded:
@@ -56441,6 +47275,11 @@ p, li { white-space: pre-wrap; }
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
[使用默认（的几何字段名称）]——将字段名称设置为“the_geom”
+
+ [Global Schema] - set the schema for all files to be imported into
+ [全局模式]——设置一个表格模式，所有文件将导入到其中
+
[Import] - import the current shapefiles in the list
@@ -56485,11 +47324,31 @@ p, li { white-space: pre-wrap; }
You need to specify a Connection first
你需要先指定一个连接
+
+ Password for %1
+ %1的密码
+
+
+ Please enter your password:
+ 请输入您的密码：
+
Connection failed - Check settings and try again
连接失败——检查设置然后再重试
+
+ PostGIS not available
+ PostGIS不可用
+
+
+ <p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
+ <p>所选数据库没有安装PostGIS。空间数据存储要求数据库已安装PostGIS。</p>
+
You need to add shapefiles to the list first
@@ -56515,86 +47374,6 @@ p, li { white-space: pre-wrap; }
Problem inserting features from file:
从文件插入要素时出错：
-
- Import Shapefiles - Relation Exists
- 导入shape文件——关系已存在
-
-
- File Name
- 文件名称
-
-
- Feature Class
- 要素类
-
-
- Features
- 要素
-
-
- DB Relation Name
- 数据库关系名称
-
-
- Schema
- 模式
-
-
- Add Shapefiles
- 添加shape文件
-
-
- PostGIS not available
- PostGIS不可用
-
-
- <p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
- <p>所选数据库没有安装PostGIS。空间数据存储要求数据库已安装PostGIS。</p>
-
-
- %1 of %2 shapefiles could not be imported.
- %2个shape文件中，%1个无法导入。
-
-
- Please enter your password:
- 请输入您的密码：
-
-
- Are you sure you want to remove the [%1] connection and all associated settings?
- 确定要移除连接[%1]及全部相关设置吗？
-
-
- Shapefiles
- shape文件
-
-
- All files
- 全部文件
-
-
- [Global Schema] - set the schema for all files to be imported into
- [全局模式]——设置一个表格模式，所有文件将导入到其中
-
-
- Password for %1
- %1的密码
-
%1
@@ -56640,6 +47419,11 @@ The following fields are duplicates:
%1
<p>执行以下SQL语句出错：</p><p>%2</p><p>数据库反馈信息为：%3</p>
+
+ Import Shapefiles - Relation Exists
+ 导入shape文件——关系已存在
+
The Shapefile:
@@ -56658,6 +47442,11 @@ Do you want to overwrite the [%2] relation?
确定要覆盖[%2] 关系吗？
+
+ %1 of %2 shapefiles could not be imported.
+ %2个shape文件中，%1个无法导入。
+
QgsSpitBase
@@ -56667,88 +47456,9 @@ Do you want to overwrite the [%2] relation?
SPIT - shape文件到PostGIS的导入工具
- Add
- 添加
-
-
- Add a shapefile to the list of files to be imported
- 向将要导入的文件列表中添加一个shapefile
-
-
- Remove
- 移除
-
-
- Remove the selected shapefile from the import list
- 从导入列表中移除选定的shapefile
-
-
- Remove All
- 全部移除
-
-
- Remove all the shapefiles from the import list
- 移除导入列表中所有的shapefile
-
-
- Set the SRID to the default value
- 将空间参考标识符设置为默认值
-
-
- Set the geometry column name to the default value
- 将几何字段的名称设置为默认值
-
-
- New
- 新建
-
-
- Create a new PostGIS connection
- 创建一个新的PostGIS连接
-
-
- Remove the current PostGIS connection
- 删除当前的PostGIS连接
-
-
- Connect
- 连接
-
-
- Edit
- 编辑
-
-
- Edit the current PostGIS connection
- 编辑当前的PostGIS连接
-
-
- Import options and shapefile list
- 导入选项与shape文件列表
+ PostgreSQL connections
+ PostgreSQL连接
连接到PostGIS
- PostgreSQL connections
- PostgreSQL连接
+ Connect
+ 连接
+
+
+ Create a new PostGIS connection
+ 创建一个新的PostGIS连接
+
+
+ New
+ 新建
+
+
+ Edit the current PostGIS connection
+ 编辑当前的PostGIS连接
+
+
+ Edit
+ 编辑
+
+
+ Remove the current PostGIS connection
+ 删除当前的PostGIS连接
+
+
+ Remove
+ 移除
+
+
+ Import options and shapefile list
+ 导入选项与shape文件列表
Geometry column name
几何字段名称
+
+ Set the geometry column name to the default value
+ 将几何字段的名称设置为默认值
+
Use default geometry column name
@@ -56776,6 +47531,12 @@ Do you want to overwrite the [%2] relation?
SRID
空间参考标识符
+
+ Set the SRID to the default value
+ 将空间参考标识符设置为默认值
+
Use default SRID
@@ -56791,6 +47552,34 @@ Do you want to overwrite the [%2] relation?
Global schema
全局模式
+
+ Add a shapefile to the list of files to be imported
+ 向将要导入的文件列表中添加一个shapefile
+
+
+ Add
+ 添加
+
+
+ Remove the selected shapefile from the import list
+ 从导入列表中移除选定的shapefile
+
+
+ Remove all the shapefiles from the import list
+ 移除导入列表中所有的shapefile
+
+
+ Remove All
+ 全部移除
+
QgsSpitPlugin
@@ -56828,8 +47617,8 @@ Do you want to overwrite the [%2] relation?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -56843,215 +47632,157 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">我们辛苦努力工作，为您奉上这个好用的软件。它有很酷的功能，不是吗？当您使用它时，是否会有一种温暖模糊的感觉呢？QGIS是一个专业开发团队的充满爱的劳动。我们希望您把它复制并共享给尽可能多的人。如果QGIS为您节省了开支，或者您喜欢我们的工作，并有足够的财政能力提供一些帮助，请考虑赞助QGIS的发展。我们使用从赞助商的钱支付旅费和有关的双年度hackfests成本，并普遍支持我们的项目目标。赞助者提同的经费将被用于支付旅费及与两年一度的开发者hackfests聚会相关的花费，并为我们的项目目标提供一般性支持。详情请浏览</span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS赞助网页</span></a><span style=" font-size:10pt;">。在下面的列表中，你可以看到正在财政上帮助我们好人和公司——非常感谢你们！</span></p></body></html>
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? Quantum GIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of Quantum GIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-size:10pt;"> for more details. In the list below you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:14pt; font-weight:600;">2011 Sponsors</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">SILVER SPONSORS</span></p>
-<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.vorarlberg.at"><span style=" font-family:'Courier New,courier'; font-size:10pt; text-decoration: underline; color:#0000ff;">State of Vorarlberg</span></a><span style=" font-family:'Courier New,courier'; font-size:10pt;"> </span><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">, Austria (11.2011)</span></p>
-<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.agi.so.ch"><span style=" font-family:'Courier New,courier'; font-size:10pt; text-decoration: underline; color:#0000ff;">Kanton Solothurn</span></a><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">, Switzerland (4.2011)</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'MS Shell Dlg 2'; font-size:8pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">BRONZE SPONSORS</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://gis.uster.ch/"><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; text-decoration: underline; color:#0000ff;">City of Uster</span></a><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#0000ff;"> </span><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#000000;">, Switzerland</span><span style=" font-family:'Helvetica,Arial,sans-serif'; color:#000000;"> (11.2011)</span></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.municipia.pt"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">Municípia, SA</span></a></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:14pt; font-weight:600;">2010 Sponsors</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">BRONZE SPONSORS</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.gfosservices.com"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">Studio Associato Gfosservices</span></a></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://nextgis.org"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">NEXTGIS</span></a></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:14pt; font-weight:600;"></p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">我们辛苦努力工作，为您奉上这个好用的软件。它有很酷的功能，不是吗？当您使用它时，是否会有一种温暖模糊的感觉呢？Quantum GIS是一个专业开发团队的充满爱的劳动。我们希望您把它复制并共享给尽可能多的人。如果QGIS为您节省了开支，或者您喜欢我们的工作，并有足够的财政能力提供一些帮助，请考虑赞助Quantum GIS的发展。我们使用从赞助商的钱支付旅费和有关的双年度hackfests成本，并普遍支持我们的项目目标。赞助者提同的经费将被用于支付旅费及与两年一度的开发者hackfests聚会相关的花费，并为我们的项目目标提供一般性支持。详情请浏览</span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS赞助网页</span></a><span style=" font-size:10pt;">。在下面的列表中，你可以看到正在财政上帮助我们好人和公司——非常感谢你们！</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:14pt; font-weight:600;">2011年度赞助者</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">银牌赞助者</span></p>
-<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Courier New,courier'; font-size:10pt;"> </span><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">奥地利</span><a href="http://www.vorarlberg.at"><span style=" font-family:'Courier New,courier'; font-size:10pt; text-decoration: underline; color:#0000ff;">福拉尔贝格州</span></a><span style=" font-family:'Courier New,courier'; font-size:10pt;"> </span><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">（2011年11月）</span></p>
-<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">瑞士</span><a href="http://www.agi.so.ch"><span style=" font-family:'Courier New,courier'; font-size:10pt; text-decoration: underline; color:#0000ff;">索洛图恩州</span></a><span style=" font-family:'Courier New,courier'; font-size:10pt; color:#333333;">（2011年4月）</span></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'MS Shell Dlg 2'; font-size:8pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">铜牌赞助者</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#000000;">瑞士</span><a href="http://gis.uster.ch/"><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; text-decoration: underline; color:#0000ff;">乌斯特市</span></a><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#0000ff;"> </span><span style=" font-family:'Helvetica,Arial,sans-serif'; font-size:10pt; color:#000000;">（2011年11月）</span></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.municipia.pt"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">Municípia, SA</span></a></p>
-<p align="center" style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:14pt; font-weight:600;">2010年度赞助者</span></p>
-<hr />
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">铜牌赞助者</span></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:10pt; font-weight:600;"></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://www.gfosservices.com"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">Studio Associato Gfosservices</span></a></p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><a href="http://nextgis.org"><span style=" font-family:'Sans'; font-size:10pt; text-decoration: underline; color:#0000ff;">NEXTGIS</span></a></p>
-<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:14pt; font-weight:600;"></p></body></html>
+
QgsSqlAnywhereProvider
+ Failed to load interface
- 载入接口失败
+ 载入接口失败
+ Failed to connect to database
- 数据库连接失败
+ 数据库连接失败
+ A connection to the SQL Anywhere database cannot be established.
- 无法建立与SQL Anywhere数据库的连接。
+ 无法建立与SQL Anywhere数据库的连接。
+ No suitable key column
- 没有合适的键字段
-
-
- The source relation %1 has no column suitable for use as a unique key.
-
-Quantum GIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- 源关系%1中没有合适的字段可作为唯一键。
-
-Quantum GIS要求关系中要有一个不大与32位的、包含唯一值的整型字段。
-
-
- Error loading attributes
- 载入属性时出错
-
-
- Ambiguous field!
- 含糊不清的字段！
-
-
- Duplicate field %1 found
-
- 找到重复字段%1
-
-
- Error describing bind parameters
- 描述绑定参数时发生错误
-
-
- Error binding parameters
- 绑定参数时出错
+ 没有合适的键字段
+ The source relation %1 has no column suitable for use as a unique key.
QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
- 源关系%1中没有合适的字段可作为唯一键。
+ 源关系%1中没有合适的字段可作为唯一键。
QGIS要求关系中要有一个不大与32位的、包含唯一值的整型字段。
+ Error loading attributes
+ 载入属性时出错
+
+
+ Ambiguous field!
+ 含糊不清的字段！
+
+
+ Duplicate field %1 found
+
+ 找到重复字段%1
+
+
+ Read attempt on an invalid SqlAnywhere data source
- 尝试读取一个无效的SQLAnywhere数据源
+ 尝试读取一个无效的SQLAnywhere数据源
+ SQLAnywhere
- SQLAnywhere
+ SQLAnywhere
+ Error inserting features
- 插入要素时出错
+ 插入要素时出错
+ Error deleting features
- 删除要素时出错
+ 删除要素时出错
+ Error adding attributes
- 添加属性时出错
+ 添加属性时出错
+ Error deleting attributes
- 删除属性时出错
+ 删除属性时出错
+ Attribute not found
- 未找到属性
+ 未找到属性
+ Error updating attributes
- 更新属性时出错
+ 更新属性时出错
+ Error updating features
- 更新要素时出错
+ 更新要素时出错
+ Error verifying geometry column %1
- 检验几何字段%1时出错
+ 检验几何字段%1时出错
+ Unknown geometry type
- 未知的几何图形类型
+ 未知的几何图形类型
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
- 列“%1”含有类型为%2的几何图形。QGIS目前尚不支持这种类型的几何图形。
+ 列“%1”含有类型为%2的几何图形。QGIS目前尚不支持这种类型的几何图形。
+ Column %1 is not restricted to a single SRID, which QGIS requires.
- 字段%1并不局限于一个单一的空间引用标识符。QGIS要求其限于一个单一的空间引用标识符。
+ 字段%1并不局限于一个单一的空间引用标识符。QGIS要求其限于一个单一的空间引用标识符。
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
- 因为QGIS只支持二维数据，SQLAnywhere数据源会将数据转换到兼容的二维投影（空间参考标识符=%1）。
+ 因为QGIS只支持二维数据，SQLAnywhere数据源会将数据转换到兼容的二维投影（空间参考标识符=%1）。
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
- 因为QGIS只支持二维数据而且找不到兼容的二维投影，SQLAnywhere数据源会尝试将数据转换到WGS 84投影（空间参考标识符=%1）。
-
-
- Column %1 has a geometry type of %2, which Quantum GIS does not currently support.
- 列“%1”含有类型为%2的几何图形。Quantum GIS目前尚不支持这种类型的几何图形。
+ 因为QGIS只支持二维数据而且找不到兼容的二维投影，SQLAnywhere数据源会尝试将数据转换到WGS 84投影（空间参考标识符=%1）。
+ Mixed Spatial Reference Systems
- 混合的空间参考系统
-
-
- Column %1 is not restricted to a single SRID, which Quantum GIS requires.
- 字段%1并不局限于一个单一的空间引用标识符。Quantum GIS要求其限于一个单一的空间引用标识符。
+ 混合的空间参考系统
+ Error checking database ReadOnly property
- 检查数据库只读属性时出错
+ 检查数据库只读属性时出错
+ Error loading SRS definition
- 载入空间参照系统定义时出错
+ 载入空间参照系统定义时出错
+ Limited Support of Round Earth SRS
- 有限支持圆形地球空间参照系统
+ 有限支持圆形地球空间参照系统
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
- 字段%1（%2）包含属于圆形地球空间参照系统（空间参考标识符=%3）的几何图形%4
+ 字段%1（%2）包含属于圆形地球空间参照系统（空间参考标识符=%3）的几何图形%4
将禁止更新几何图形值，而且查询性能可能会很差，因为空间索引将无法使用。要提高性能，可以考虑在新的（可能已经计算好的）、包含这些几何图形的二维投影的字段上创建一个空间索引。请参考SQLAnywhere文档中的ST_SRID(INT)和ST_Transform(INT)方法。
@@ -57186,14 +47917,14 @@ Updates to geometry values will be disabled, and query performance may be poor b
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
名为“%1”的符号已经存在。
要覆盖吗？
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
名为“%1”的颜色渐变已经存在。
要覆盖吗？
@@ -57254,61 +47985,6 @@ Overwrite?
QgsStyleV2ManagerDialog
-
- Marker symbol (%1)
- 标记符号(%1)
-
-
- Line symbol (%1)
- 线条符号(%1)
-
-
- Fill symbol (%1)
- 填充符号(%1)
-
-
- Color ramp (%1)
- 颜色渐变(%1)
-
-
- Symbol name
- 符号名称
-
-
- Please enter name for new symbol:
- 请输入新符号的名称：
-
-
- new symbol
- 新建符号
-
-
- Save symbol
- 保存符号
-
-
- Symbol with name '%1' already exists. Overwrite?
- 名为“%1”的符号已经存在，要覆盖吗？
-
-
- Gradient
- 梯度
-
-
- Type here to filter symbols ...
- 在这里输入符号名以过滤符号...
-
Type here to filter symbols...
@@ -57345,6 +48021,33 @@ Overwrite?
Edit Smart Group
编辑便捷组
+
+ Marker symbol (%1)
+ 标记符号(%1)
+
+
+ Line symbol (%1)
+ 线条符号(%1)
+
+
+ Fill symbol (%1)
+ 填充符号(%1)
+
+
+ Color ramp (%1)
+ 颜色渐变(%1)
+
+
+ Gradient
+ 梯度
+
cpt-city
cpt-city
+
+ new symbol
+ 新建符号
+
new marker
@@ -57391,11 +48099,22 @@ Overwrite?
Please enter a name for new symbol:
输入新符号名：
+
+ Save symbol
+ 保存符号
+
Cannot save symbol without name. Enter a name.
不能保存无名符号。请先输入符号名。
+
+ Symbol with name '%1' already exists. Overwrite?
+ 名为“%1”的符号已经存在，要覆盖吗？
+
Color ramp type
@@ -57455,22 +48174,22 @@ Overwrite?
All Symbols
-
Groups
-
Ungrouped
-
Smart Groups
-
There was some error while editing the smart group.
编辑编辑组合过程中遇到错误。
-
- Color ramp name
- 颜色渐变名称
-
-
- Please enter name for new color ramp:
- 请输入新颜色渐变的名称：
-
-
- new color ramp
- 新建颜色渐变
-
-
- Load styles
- 载入样式
-
-
- XML files (*.xml *XML)
- XML文件(*.xml *.XML)
-
QgsStyleV2ManagerDialogBase
@@ -57644,15 +48343,6 @@ There was a problem with your symbol database.
Add item
添加条目
-
- Share
- 共享
-
-
- Add
- 添加
-
Edit item
@@ -57669,16 +48359,9 @@ There was a problem with your symbol database.
移除条目
- Remove
- 移除
-
-
- Export...
- 导出...
-
-
- Import...
- 导入...
+ Share
+ 共享
@@ -57798,21 +48481,35 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
QgsSvgMarkerSymbolLayerV2Widget
+
+ Millimeter
+
+
+ Map unit
+
Select SVG file
@@ -57823,24 +48520,6 @@ There was a problem with your symbol database.
SVG files
SVG文件
-
- Size
- 大小
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
Border width
@@ -57874,12 +48553,12 @@ There was a problem with your symbol database.
Horizontal anchor point
-
Vertical anchor point
-
@@ -57912,39 +48591,23 @@ There was a problem with your symbol database.
File not found
未找到文件
-
- Invalid file
- 无效的文件
-
-
- Error, file does not exist or is not readable
- 错误，文件不存在或无法读取
-
-
- Invalid file url
- 无效的文件地址
-
-
- Error, file URL is invalid
- 错误，文件地址无效
-
QgsSymbolLayerV2Widget
Size
- 大小
+
area
- 面积
+
diameter
-
@@ -57973,51 +48636,32 @@ There was a problem with your symbol database.
定义符号图层渲染的顺序。单元格中的数字定义图层将在哪一重渲染通道上绘制。
-
- QgsSymbolV2PropertiesDialog
-
- Outline: %1
- 轮廓：%1
-
-
QgsSymbolV2SelectorDialog
Symbol name
- 符号名称
+
Please enter name for the symbol:
- 请为新符号输入一个名称：
+
New symbol
- 新建符号
+
Save symbol
- 保存符号
+
Symbol with name '%1' already exists. Overwrite?
- 名为“%1”的符号已经存在，要覆盖吗？
-
-
- Transparency %1%
- 透明度 %1%
-
-
- Invalid Selection!
- 无效的选择！
-
-
- Kindly select a symbol to add layer.
- 选择一个符号以添加图层。
+
@@ -58027,10 +48671,6 @@ There was a problem with your symbol database.
Symbol selector
符号选择器
-
- Symbol layers
- 符号图层
-
Add symbol layer
@@ -58059,126 +48699,50 @@ There was a problem with your symbol database.
Save symbol
- 保存符号
+
Save
- 保存
-
-
- Change...
- 更改...
-
-
- Unit
- 单位
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
-
- Opacity
- 不透明
-
-
- Color
- 颜色
-
-
- Change
- 更改
-
-
- Size
- 大小
-
-
- Rotation
- 旋转
-
-
- °
- °
-
-
- Width
- 宽度
-
-
- Save as style
- 保存为样式
-
-
- Saved styles
- 保存样式
-
-
- Symbol Name
- 符号名称
-
-
- Properties
- 属性
-
-
- Advanced
- 高级
-
-
- Style manager...
- 样式管理...
+
QgsSymbolsListWidget
-
- Style Manager
- 样式管理器
-
-
- Save in symbol library...
- 保存到符号库...
-
Millimeter
- 毫米
+
Map unit
- 地图单位
+
Symbol name
- 符号名称
+
Please enter name for the symbol:
- 请为新符号输入一个名称：
+
New symbol
- 新建符号
+
Save symbol
- 保存符号
+
Symbol with name '%1' already exists. Overwrite?
- 名为“%1”的符号已经存在，要覆盖吗？
+
QgsTINInterpolatorDialog
-
- Save triangulation to file
- 将三角剖分保存到文件
-
Linear
@@ -58204,6 +48763,11 @@ There was a problem with your symbol database.
Clough-Toucher (cubic)
Clough-Toucher (cubic)
+
+ Save triangulation to file
+ 将三角剖分保存到文件
+
QgsTINInterpolatorDialogBase
@@ -58212,26 +48776,26 @@ There was a problem with your symbol database.
Triangle based interpolation
三角插值
-
- Export triangulation to shapefile after interpolation
- 插值完成后将三角剖分导出到shape文件中
-
-
- ...
- ...
-
Interpolation method
插值方法
+
+ Export triangulation to shapefile after interpolation
+ 插值完成后将三角剖分导出到shape文件中
+
Output file
输出文件
+
+ ...
+ ...
+
QgsTextAnnotationDialog
@@ -58245,10 +48809,6 @@ There was a problem with your symbol database.
Select font color
选择字体颜色
-
- Select background color
- 选择背景颜色
-
QgsTextAnnotationDialogBase
@@ -58267,27 +48827,23 @@ There was a problem with your symbol database.
I
斜体
-
- Background color
- 背景颜色
-
QgsTextEditConfigDlg
Form
- 窗体
+
Multiline
- 线集
+
HTML
- HTML
+
@@ -58305,58 +48861,31 @@ There was a problem with your symbol database.
QgsTipFactory
-
- Quantum GIS is open source
- Quantum GIS是开放源代码的
-
-
- Quantum GIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available to the Quantum GIS project, and that you can not create a new version of Quantum GIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
- Quantum GIS是开源软件。这意味着任何人都可以自由查看和修改该软件的源代码。GPL设置了一个限制，就是你所做的任何修改都必须返回给Quantum GIS项目，你不能创建“闭源”许可下的Quantum GIS新版本。请访问<a href="http://qgis.org">QGIS的主页（http://qgis.org）</a>以了解更多信息。
-
QGIS Publications
QGIS出版物
- If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the Quantum GIS home page (http://http://qgis.org/en/site/about/case_studies/index.html).
- 如果你撰写的科学论文或任何其他文章中参考或提及QGIS，我们会很乐意将你的工作包括在Quantum GIS主页（http://http://qgis.org/en/site/about/case_studies/index.html）的<a href=“http://qgis.org/en/site/about/case_studies/index.html”>案例研究部分</a>。
+ If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
+ 如果你有写有关QGIS的科学报告或者其他文章，我们很乐意将你的作品加入QGIS主页上的<a href="http://qgis.org/en/site/about/case_studies/index.html">研究系列</a>中去。
Become an QGIS translator
成为QGIS翻译者
-
- Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page (http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui).</a>
- 你想在QGIS中看到你的母语吗？我们正在寻找更多的翻译人员并会感谢您的帮助！翻译过程是相当简单的——在QGIS的维基的<a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">翻译页面（http://qgis.org/wiki/ GUI_Translation）</a>上有说明。
-
QGIS Mailing lists
QGIS邮件列表
-
- If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating the the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page (http://qgis.org/en/site/forusers/support.html#mailing-lists).
- 如果您在使用QGIS过程中需要帮助，我们有一个“用户”邮件列表。在这个邮件列表中，用户们就软件使用相关的问题彼此相互帮助。对于那些想帮助并讨论QGIS代码相关东西的人，我们也提供了一个“开发者”邮件列表作为讨论基地。在QGIS主页（http://qgis.org/en/site/forusers/support.html#mailing-lists）的<a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">社区章节</a>中有关于如何订阅邮件列表的详细内容。
-
-
- If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page (http://qgis.org/en/site/forusers/support.html#mailing-lists).
- 如果您在使用QGIS过程中需要帮助，我们有一个“用户”邮件列表。在这个邮件列表中，用户们就软件使用相关的问题彼此相互帮助。对于那些想帮助并讨论QGIS代码相关东西的人，我们也提供了一个“开发者”邮件列表作为讨论基地。在QGIS主页（http://qgis.org/en/site/forusers/support.html#mailing-lists）的<a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">社区章节</a>中有关于如何订阅邮件列表的详细内容。
-
Is it 'QGIS' or 'Quantum GIS'?
是“QGIS”，还是“Quantum GIS”？
-
- Both are correct. For articles we suggest you write 'Quantum GIS (QGIS) is ....' and then refer to it as QGIS thereafter.
- 两个都对。如果你在文章中提到这个软件，我们建议你写成“Quantum GIS（QGIS）是...”，后面直接称之为QGIS。
-
-
- How do I refer to Quantum GIS?
- 怎样称谓Quantum GIS？
-
QGIS is open source
@@ -58367,10 +48896,6 @@ There was a problem with your symbol database.
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
QGIS是开源软件。这意味着任何人都可以自由查看和修改该软件的源代码。GPL设置了一个限制，就是你所做的任何修改都必须返回给QGIS项目，你不能创建“闭源”许可下的Quantum GIS新版本。请访问<a href="http://qgis.org">QGIS的主页（http://qgis.org）</a>以了解更多信息。
-
- If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page (http://http://qgis.org/en/site/about/case_studies/index.html).
- 如果你撰写的科学论文或任何其他文章中参考或提及QGIS，我们会很乐意将你的工作包括在Quantum GIS主页（http://http://qgis.org/en/site/about/case_studies/index.html）的<a href=“http://qgis.org/en/site/about/case_studies/index.html”>案例研究部分</a>。
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
@@ -58391,18 +48916,15 @@ There was a problem with your symbol database.
Add the current date to a map layout
将当前日期添加到地图版面中
-
- You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://doc.qt.nokia.com/latest/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
- 你可以将当前日期变量添加到你的地图版面中。创建一个普通文本标签并将字符串$CURRENT_DATE(yyyy-MM-dd)添加到文本框中。更多日期格式请参阅<a href="http://doc.qt.nokia.com/latest/qdate.html#toString">QDate::toString格式文档</a>。
-
Moving Elements and Maps in the Print Composer
在打印版式管理器中移动元素和地图
- In the print composer tool bar you can find two buttons for moving elements. The left one (a selection cursor with the hand symbol) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> dialogue, which can be found in the tab <strong>Item → General Options → Position and Size</strong>. For easier positioning you can also set specific anchor points of the element within this dialogue. The other move tool (the globe icon combined with the hand icon) allows one to move the map content within a map frame.
- 你可以在打印版式管理器工具栏找到两个移动元素的按钮。左边的（手形加指针的那个图标）选择并移动版面中的元素。用此工具选择元素后，你也可以用方向键移动它们。为准确定位，可以使用<strong>位置和大小</strong>的对话，该对话框位于<strong>项目 → 常规选项 → 位置和大小</strong>标签页。为方便定位，你还可以在该对话框中设置特定元素的锚点。其他移动工具（手形加地球的那个图标）允许你移动地图框架内的地图内容。
+ In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
+ 在打印版式工具栏上你可以找到两个可用于移动元素的按钮。左边的一个（向右箭头图标）用于选择和移动布局中的元素。在选定了元素之后你也可以通过键盘上的箭头移动元素。若要精确定位你可使用<strong>位置和大小</strong>章节操作，这可以在选项卡<strong>选项属性->位置和大小</strong>处找到。另外一个移动工具按钮（带有向右箭头的地图画布图标）允许你在地图框架里面移动地图内容。
Rotating a map and linking a north arrow
旋转地图并关联罗盘
-
- You can rotate a map by setting its rotation value in the <strong>Item tab → Map</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool, the button with the little camera icon. QGIS comes with a selection of north arrows. After the placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
- 你可以在<strong>条目属性 → 地图</strong>标签页设置旋转角度来旋转地图。如果你想在版面中放置一个罗盘，可以使用<strong>添加位图</strong>工具，就是版式管理器工具栏上一个相机图标的那个按钮。选中添加的位图框，其条目属性上会出现许多预载入位图，当中有各式罗盘可供选择。在版面上放置了罗盘之后，你可以勾选“与该地图同步”选项框，并在右侧下拉框中选择一个地图框架，这样便将该罗盘与特定的地图关联起来。当你旋转关联地图时，罗盘指针会也会自动地跟随旋转。
-
-
- If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
- 如果你有写有关QGIS的科学报告或者其他文章，我们很乐意将你的作品加入QGIS主页上的<a href="http://qgis.org/en/site/about/case_studies/index.html">研究系列</a>中去。
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
@@ -58443,16 +48956,6 @@ There was a problem with your symbol database.
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
你可以在地图布局中添加当前的日期变量，具体操作为创建一个普通的文本标签，然后在标签编辑框中添加字符串$CURRENT_DATE(yyyy-MM-dd)。参考<a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> 以了解更多有关时间格式的信息。
-
- In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
- 在打印版式工具栏上你可以找到两个可用于移动元素的按钮。左边的一个（向右箭头图标）用于选择和移动布局中的元素。在选定了元素之后你也可以通过键盘上的箭头移动元素。若要精确定位你可使用<strong>位置和大小</strong>章节操作，这可以在选项卡<strong>选项属性->位置和大小</strong>处找到。另外一个移动工具按钮（带有向右箭头的地图画布图标）允许你在地图框架里面移动地图内容。
-
-
- In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
- 在打印版式中你可以通过设置旋转角度值旋转一张地图，见<strong>选项属性 ->地图 -> 主要属性</strong> 部分。你可以使用<strong>添加图片</strong>工具在布局中添加指北针。在布局中添加和放置好指北针之后，你可以通过激活<strong>与地图同步</strong>复选框然后选择一个地图框架，从而来连接指北针和选择的地图框架。这样之后当你改变地图的旋转角度值之后，指北针也会做出相应的旋转。
-
Numeric scale value in map layout linked to map frame
@@ -58478,11 +48981,6 @@ There was a problem with your symbol database.
Stopping rendering
停止渲染
-
- Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
- 按‘Esc’按钮或点击状态栏下方‘停止地图渲染’图标以加快地图绘制速度。取消勾选状态栏右下方的的‘渲染’复选框以临时禁止地图渲染，从而便于你执行其他操作，例如修改地图符号等。操作完毕后记得勾选该复选框以再次渲染地图！
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
@@ -58493,15 +48991,21 @@ There was a problem with your symbol database.
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
QGIS具有丰富的插件来扩充它的功能。QGIS自带了一些插件，你可以通过“插件->管理和安装插件”菜单来查看QGIS插件，此外，你也可以在此下载和安装由QGIS社区分享的丰富的<a href="http://plugins.qgis.org/">python插件</a>以进一步扩充QGIS性能。从现在开始，尽情的享受这些丰富的插件所带给你的乐趣吧。
-
- Sometimes you have a very large dataset which takes ages to draw. You can press 'esc' (the escape key), or click the small red 'X' icon in the status bar to the bottom right of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
- 有些时候，你的数据集可能非常大，以至于绘图时间相当长。你可以随时按“Esc”键，或点击窗口底部状态栏上的带红色禁止符号或红色小“X”的按钮，来终止地图渲染。如果你想进行一些操作（例如修改符号选项），想要在操作过程中暂时禁用地图渲染，可以取消勾选窗口底部状态栏上的“渲染”选项框。操作完成后，不要忘了恢复勾选，以使地图恢复自动绘制和显示！
-
Join intersected polylines when rendering
渲染时连接相交的多边形
+
+ In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
+ 在打印版式中你可以通过设置旋转角度值旋转一张地图，见<strong>选项属性 ->地图 -> 主要属性</strong> 部分。你可以使用<strong>添加图片</strong>工具在布局中添加指北针。在布局中添加和放置好指北针之后，你可以通过激活<strong>与地图同步</strong>复选框然后选择一个地图框架，从而来连接指北针和选择的地图框架。这样之后当你改变地图的旋转角度值之后，指北针也会做出相应的旋转。
+
+
+ Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
+ 按‘Esc’按钮或点击状态栏下方‘停止地图渲染’图标以加快地图绘制速度。取消勾选状态栏右下方的的‘渲染’复选框以临时禁止地图渲染，从而便于你执行其他操作，例如修改地图符号等。操作完毕后记得勾选该复选框以再次渲染地图！
+
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
@@ -58522,31 +49026,11 @@ There was a problem with your symbol database.
Sponsor QGIS
赞助QGIS
-
- If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
- 如果QGIS为您节省了开支，或者您喜欢我们的工作，并有足够的财政能力提供一些帮助，请考虑赞助Quantum GIS的发展。我们使用从赞助商的钱支付旅费和有关的双年度hackfests成本，并普遍支持我们的项目目标。赞助者提同的经费将被用于支付旅费及与两年一度的开发者hackfests聚会相关的花费，并为我们的项目目标提供一般性支持。详情请浏览<a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS赞助网页</a>。
-
QGIS has Plugins!
QGIS有很多插件！
-
- QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage Plugins menu. In addition there are over 150 Python plugins contributed by the user community that can be installed from the Plugins->Fetch Python Plugins menu. Don't miss out on all QGIS has to offer---check out the plugins and see what they can do for you.
- QGIS有插件扩展功能。QGIS与一些核心插件一起分发，你可以点击“插件” → “管理插件”菜单，打开QGIS插件管理器查看这些插件。此外，还有超过150个用户社区捐赠的Python插件，可以点击“插件“ → ”安装Python插件“菜单来安装这些插件。千万别错过了QGIS提供的各种功能——查看插件，看看它们可以为你做什么。
-
-
- If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of Quantum GIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
- 如果QGIS为您节省了开支，或者您喜欢我们的工作，并有足够的财政能力提供一些帮助，请考虑赞助Quantum GIS的发展。我们使用从赞助商的钱支付旅费和有关的双年度hackfests成本，并普遍支持我们的项目目标。赞助者提同的经费将被用于支付旅费及与两年一度的开发者hackfests聚会相关的花费，并为我们的项目目标提供一般性支持。详情请浏览<a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS赞助网页</a>。
-
-
- Quantum GIS has Plugins!
- Quantum GIS有很多插件！
-
-
- Quantum GIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage Plugins menu. In addition there are over 150 Python plugins contributed by the user community that can be installed from the Plugins->Fetch Python Plugins menu. Don't miss out on all QGIS has to offer---check out the plugins and see what they can do for you.
- Quantum GIS有插件扩展功能。QGIS与一些核心插件一起分发，你可以点击“插件” → “管理插件”菜单，打开QGIS插件管理器查看这些插件。此外，还有超过150个用户社区捐赠的Python插件，可以点击“插件“ → ”安装Python插件“菜单来安装这些插件。千万别错过了QGIS提供的各种功能——查看插件，看看它们可以为你做什么。
-
QgsTipGui
@@ -58573,7 +49057,7 @@ There was a problem with your symbol database.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -58632,88 +49116,6 @@ p, li { white-space: pre-wrap; }
QgsTransformSettingsDialog
-
- Linear
- 线性
-
-
- Helmert
- 赫尔默特
-
-
- Projective
- 投影
-
-
- Polynomial 1
- 多项式1
-
-
- Polynomial 2
- 多项式2
-
-
- Polynomial 3
- 多项式3
-
-
- Thin Plate Spline
- 薄板样条
-
-
- Info
- 信息
-
-
- Please set output name
- 请设置输出名称
-
-
- %1 requires at least %2 GCPs. Please define more
- %1要求至少%2个地面控制点。请定义更多的地面控制点
-
-
- Invalid output file name
- 无效的输出文件名
-
-
- Save raster
- 保存栅格
-
-
- Select save PDF file
- 选择PDF输出文件
-
-
- PDF Format
- PDF格式
-
-
- _modified
- Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
- _已更改
-
Transformation settings
@@ -58734,6 +49136,13 @@ p, li { white-space: pre-wrap; }
Nearest neighbour
近邻取样
+
+ Linear
+ 线性
+
Cubic
@@ -58812,57 +49221,80 @@ p, li { white-space: pre-wrap; }
Load in QGIS when done
完成时载入到QGIS
-
-
- QgsUniqueValueDialog
- Confirm Delete
- 确认删除
+ Helmert
+ 赫尔默特
- The classification field was changed from '%1' to '%2'.
-Should the existing classes be deleted before classification?
- 类别字段已经由“%1”更改为“%2”。
-分类之前是否删除已有的类别？
+ Polynomial 1
+ 多项式1
- default
- 默认
-
-
-
- QgsUniqueValueDialogBase
-
- Form1
- 窗体1
+ Polynomial 2
+ 多项式2
- Classify
- 分类
+ Polynomial 3
+ 多项式3
- Classification field
- 分类字段
+ Thin Plate Spline
+ 薄板样条
- Add class
- 添加类别
+ Projective
+ 投影
- Delete classes
- 删除类别
+ Info
+ 信息
- Randomize Colors
- 随机颜色
+ Please set output name
+ 请设置输出名称
- Reset Colors
- 重置颜色
+ %1 requires at least %2 GCPs. Please define more
+ %1要求至少%2个地面控制点。请定义更多的地面控制点
- Restrict changes to common properties
- 限制共同属性的更改
+ Invalid output file name
+ 无效的输出文件名
+
+
+ Save raster
+ 保存栅格
+
+
+ Select save PDF file
+ 选择PDF输出文件
+
+
+ PDF Format
+ PDF格式
+
+
+ _modified
+ Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
+ _已更改
@@ -58870,17 +49302,17 @@ Should the existing classes be deleted before classification?
Form
- 窗体
+
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
- 用户可以选择一个已在该属性中的使用的值。若可编辑，将显示一个支持自动完成功能的行编辑框，否则显示一个组合框。
+
Editable
- 可编辑
+
@@ -58888,12 +49320,12 @@ Should the existing classes be deleted before classification?
Form
- 窗体
+
Adjust scaling range
-
@@ -58901,19 +49333,18 @@ Should the existing classes be deleted before classification?
Select a file
- 选择一个文件
+
Error
- 错误
+
Could not open file %1
Error was:%2
- 无法打开文件%1
-错误：%2
+
@@ -58921,37 +49352,37 @@ Error was:%2
Form
- 窗体
+
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
- 带预定义条目的组合框。值存储在属性里，对应的描述显示在组合框中。
+
Load Data from layer
- 从图层载入数据
+
Load Data from CSV file
- 从CSV文件载入数据
+
Value
- 值
+
Description
- 描述
+
Remove Selected
- 移除选中
+
@@ -58959,7 +49390,7 @@ Error was:%2
Edit filter expression
- 编辑过滤表达式
+
@@ -58967,52 +49398,52 @@ Error was:%2
Form
- 窗体
+
Select layer, key column and value column
- 选择图层、键字段和值字段
+
Layer
- 图层
+
Key column
- 键字段
+
Value column
- 值字段
+
Allow null value
- 允许空值
+
Order by value
- 按值排序
+
Allow multiple selections
- 允许多选
+
Filter expression
- 过滤表达式
+
...
- ...
+
@@ -59020,7 +49451,7 @@ Error was:%2
(no selection)
- （未选择）
+
@@ -59096,12 +49527,12 @@ Error was:%2
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -59139,10 +49570,6 @@ Error was:%2
Discrete
离散
-
- Continous
- 连续
-
Continuous
@@ -59190,10 +49617,6 @@ Error was:%2
Gradient color ramp
梯度颜色渐变
-
- Change
- 更改
-
Color 1
@@ -59220,11 +49643,6 @@ Error was:%2
Multiple stops
使用多个终止色
-
- Offset (%)
- 偏移（%）
-
Add stop
@@ -59235,147 +49653,29 @@ Error was:%2
Remove stop
移除终止色
-
- Information
- 信息
-
Color
颜色
- Offset
- 偏移量
+ Offset (%)
+ 偏移（%）
Preview
预览
+
+ Information
+ 信息
+
QgsVectorLayer
-
- ERROR: no provider
- 错误：无数据源
-
-
- ERROR: layer not editable
- 错误：图层不可编辑
-
-
- SUCCESS: attribute %1 was added.
- 成功：添加了属性%1。
-
-
- ERROR: attribute %1 not added
- 错误：未能添加属性%1
-
-
- Classification field not found
- 未找到类别字段
-
-
- SUCCESS: %n attribute(s) deleted.
- deleted attributes count
-
- 成功：删除了%n个属性。
-
-
-
- ERROR: %n attribute(s) not deleted.
- not deleted attributes count
-
- 错误：未能删除%n个属性。
-
-
-
- SUCCESS: %n attribute(s) added.
- added attributes count
-
- 成功：添加了%n个属性。
-
-
-
- ERROR: %n new attribute(s) not added
- not added attributes count
-
- 错误：未能添加%n个新属性
-
-
-
- SUCCESS: %n attribute value(s) changed.
- changed attribute values count
-
- 成功：更改了%n个属性值。
-
-
-
- ERROR: %n attribute value change(s) not applied.
- not changed attribute values count
-
- 错误：未能更改%n个属性值。
-
-
-
- SUCCESS: %n feature(s) added.
- added features count
-
- 成功：添加了%n个要素。
-
-
-
- ERROR: %n feature(s) not added.
- not added features count
-
- 错误：未能添加%n个要素。
-
-
-
- ERROR: %n feature(s) not added - provider doesn't support adding features.
- not added features count
-
- 错误：未能添加%n个要素——数据源不支持添加要素。
-
-
-
- SUCCESS: %n geometries were changed.
- changed geometries count
-
- 成功：更改了%n个几何图形。
-
-
-
- ERROR: %n geometries not changed.
- not changed geometries count
-
- 错误：未能更改%n个几何图形。
-
-
-
- SUCCESS: %n feature(s) deleted.
- deleted features count
-
- 成功：删除了%n个要素。
-
-
-
- ERROR: %n feature(s) not deleted.
- not deleted features count
-
- 错误：未能删除%n个要素。
-
-
-
-
- Provider errors:
-
-..数据源错误：
-
Updating feature count for layer %1
@@ -59386,6 +49686,16 @@ Error was:%2
Abort
放弃
+
+ ERROR: no provider
+ 错误：无数据源
+
+
+ ERROR: layer not editable
+ 错误：图层不可编辑
+
Commit errors:
@@ -59393,78 +49703,6 @@ Error was:%2
提交时出错：
%1
-
- General:
- 通用：
-
-
- Layer comment: %1
- 图层备注：%1
-
-
- Storage type of this layer: %1
- 该图层的存储类型：%1
-
-
- Source for this layer: %1
- 该图层的数据源：%1
-
-
- Geometry type of the features in this layer: %1
- 该图层中的要素几何图形类型：%1
-
-
- The number of features in this layer: %1
- 该图层中的要素数目：%1
-
-
- Editing capabilities of this layer: %1
- 该图层可用的编辑功能：%1
-
-
- Extents:
- 范围：
-
-
- In layer spatial reference system units :
- 以图层空间参考系统的单位计算：
-
-
- xMin,yMin %1,%2 : xMax,yMax %3,%4
- 横、纵坐标最小值 %1，%2 ：横、纵坐标最大值 %3，%4
-
-
- unknown extent
- 未知范围
-
-
- In project spatial reference system units :
- 以项目空间参考系统的单位计算：
-
-
- Layer Spatial Reference System:
- 图层的空间参考系统：
-
-
- Project (Output) Spatial Reference System:
- 项目（输出的）的空间参考系统:
-
-
- (Invalid transformation of layer extents)
- （无效的图层范围转换）
-
-
- Attribute field info:
- 属性字段信息：
-
-
- CRS
- 坐标参照系
-
General
@@ -59541,6 +49779,27 @@ Error was:%2
Attribute field info
属性字段信息
+
+ Error: qgis element could not be found
+ 错误：找不到qgis元素
+
+
+ xMin,yMin %1,%2 : xMax,yMax %3,%4
+ 横、纵坐标最小值 %1，%2 ：横、纵坐标最大值 %3，%4
+
+
+ unknown extent
+ 未知范围
+
+
+ (Invalid transformation of layer extents)
+ （无效的图层范围转换）
+
Field
@@ -59566,11 +49825,6 @@ Error was:%2
Comment
注解
-
- Error: qgis element could not be found
- 错误：找不到qgis元素
-
QgsVectorLayerEditBuffer
@@ -59578,33 +49832,25 @@ Error was:%2
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- 成功：删除了%n个属性。
-
+ 成功：删除了%n个属性。
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- 错误：未能删除%n个属性。
-
+ 错误：未能删除%n个属性。
SUCCESS: %n attribute(s) added.
added attributes count
-
- 成功：添加了%n个属性。
-
+ 成功：添加了%n个属性。
ERROR: %n new attribute(s) not added
not added attributes count
-
- 错误：未能添加%n个新属性
-
+ 错误：未能添加%n个新属性
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
- 成功：更改了%n个属性值。
-
+ 成功：更改了%n个属性值。
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
- 错误：未能更改%n个属性值。
-
+ 错误：未能更改%n个属性值。
SUCCESS: %n feature(s) deleted.
deleted features count
-
- 成功：删除了%n个要素。
-
+ 成功：删除了%n个要素。
ERROR: %n feature(s) not deleted.
not deleted features count
-
- 错误：未能删除%n个要素。
-
+ 错误：未能删除%n个要素。
SUCCESS: %n feature(s) added.
added features count
-
- 成功：添加了%n个要素。
-
+ 成功：添加了%n个要素。
ERROR: %n feature(s) not added.
not added features count
-
- 错误：未能添加%n个要素。
-
+ 错误：未能添加%n个要素。
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
- 错误：未能添加%n个要素——数据源不支持添加要素。
-
+ 错误：未能添加%n个要素——数据源不支持添加要素。
SUCCESS: %n geometries were changed.
changed geometries count
-
- 成功：更改了%n个几何图形。
-
+ 成功：更改了%n个几何图形。
ERROR: %n geometries not changed.
not changed geometries count
-
- 错误：未能更改%n个几何图形。
-
+ 错误：未能更改%n个几何图形。
QgsVectorLayerProperties
-
- Single Symbol
- 单一符号
-
-
- Graduated Symbol
- 渐进符号
-
-
- Continuous Color
- 连续色
-
-
- Unique Value
- 唯一值
-
-
- Calendar
- 日历
-
-
- Value relation
- 值关系
-
-
- UUID generator
- 唯一识别码（UUID）生成器
-
-
- Text diagram
- 文本图表
-
-
- Pie chart
- 饼图
-
-
- Map units
- 地图单位
-
-
- Spatial Index
- 空间索引
-
-
- Creation of spatial index failed
- 空间索引创建失败
-
-
- General:
- 通用：
-
-
- Extents:
- 范围：
-
-
- In layer spatial reference system units :
- 以图层空间参考系统的单位计算:
-
-
- In project spatial reference system units :
- 以项目空间参考系统的单位计算:
-
-
- Layer Spatial Reference System:
- 图层的空间参考系统：
-
-
- Project (Output) Spatial Reference System:
- 项目的(输出的)空间参考系统：
-
-
- Attribute field info:
- 属性字段信息：
-
-
- Field
- 字段
-
-
- Background color
- 背景颜色
-
-
- Pen color
- 画笔颜色
-
-
- AroundPoint
- 点周围
-
-
- Save Style
- 保存样式
-
-
- Save Style...
- 保存样式...
-
-
- mm
- 毫米
-
-
- OverPoint
- 点所在位置
-
-
- Line
- 线条上
-
-
- Horizontal
- 水平摆放
-
-
- Free
- 自由摆放
-
-
- On line
- 线条中间
-
-
- Above line
- 线条上方
-
-
- Below Line
- 线条下方
-
-
- Map orientation
- 地图方向
-
-
- None
- 无
-
-
- Type
- 类型
-
-
- Length
- 长度
-
-
- Precision
- 精度
-
-
- Comment
- 备注
-
-
- Default Style
- 默认样式
-
-
- Layer Properties - %1
- 图层属性 - %1
-
-
- Stop editing mode to enable this.
- 停止编辑模式以启用这个。
-
-
- Name conflict
- 名称冲突
-
-
- The attribute could not be inserted. The name already exists in the table.
- 无法插入该属性，表格中已经存在同名属性。
-
-
- The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
- 这里显示用于限制图层上要素的查询。点击查询构建器按钮可以输入或编辑查询
-
-
- Creation of spatial index successful
- 空间索引创建成功
-
-
- Load layer properties from style file
- 从样式文件中载入图层属性
-
Save in database (%1)
保存到数据库（%1）
+
+ Layer Properties - %1
+ 图层属性 - %1
+
+
+ Stop editing mode to enable this.
+ 停止编辑模式以启用这个。
+
+
+ Insert expression
+ 插入表达式
+
+
+ This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
+ 这个按钮会打开查询构建器，允许你创建一个在地图视图上显示的要素子集，而不是将所有要素都显示在该图层上
+
+
+ The query used to limit the features in the layer is shown here. To enter or modify the query, click on the Query Builder button
+ 这里显示用于限制图层上要素的查询。点击查询构建器按钮可以输入或编辑查询
+
Not supported
- 不支持
+
+
+ Spatial Index
+ 空间索引
+
+
+ Creation of spatial index successful
+ 空间索引创建成功
+
+
+ Creation of spatial index failed
+ 空间索引创建失败
Datasource database
数据源数据库
+
+ Default Style
+ 默认样式
+
Loaded from Provider
@@ -59992,6 +50068,11 @@ Error was:%2
Save default style to:
默认样式保存到：
+
+ Load layer properties from style file
+ 从样式文件中载入图层属性
+
Load Style
@@ -60025,106 +50106,9 @@ Error was:%2
检索到的样式名称无效。错误消息：%1
- Transparency: %1%
- 透明度：%1%
-
-
- Overlay
- 叠层
-
-
- Id
- 标识符
-
-
- Name
- 名称
-
-
- Edit widget
- 编辑控件
-
-
- Alias
- 别名
-
-
- Added attribute
- 添加属性
-
-
- Deleted attribute
- 删除属性
-
-
- Insert expression
- 插入表达式
-
-
- Enumeration
- 枚举
-
-
- Immutable
- 不可变
-
-
- Line edit
- 线条编辑
-
-
- Unique values
- 唯一值
-
-
- Unique values editable
- 唯一值可编辑
-
-
- Classification
- 类别
-
-
- Value map
- 值图
-
-
- Edit range
- 编辑范围
-
-
- Slider range
- 滑块范围
-
-
- File name
- 文件名
-
-
- Hidden
- 隐藏
-
-
- This button opens the query builder and allows you to create a subset of features to display on the map canvas rather than displaying all features in the layer
- 这个按钮会打开查询构建器，允许你创建一个在地图视图上显示的要素子集，而不是将所有要素都显示在该图层上
-
-
- Checkbox
- 复选框
-
-
- Text edit
- 文本编辑
-
-
- Symbology
- 符号化
-
-
- Do you wish to use the new symbology implementation for this layer?
- 你想在该图层使用新式符号吗？
+ Save Style
+ 保存样式
@@ -60134,116 +50118,6 @@ Error was:%2
Layer Properties
图层属性
-
- Symbology
- 符号化
-
-
- General
- 通用
-
-
- Use scale dependent rendering
- 依比例渲染
-
-
- Display name
- 显示名称
-
-
- Use this control to set which field is placed at the top level of the Identify Results dialog box.
- 用该控件来设置某个字段显示在识别结果对话框的顶部.
-
-
- Display field for the Identify Results dialog box
- 识别结果对话框中显示的字段
-
-
- This sets the display field for the Identify Results dialog box
- 在此处设置识别结果对话框中显示的字段
-
-
- Display field
- 显示字段
-
-
- Subset
- 子集
-
-
- Query Builder
- 查询构建器
-
-
- Create Spatial Index
- 创建空间索引
-
-
- Minimum scale, i.e. maximum scale denominator. This limit is exclusive, that means the layer will not be displayed on this scale.
- 最小比例尺，例如最大比例尺分母。该限制具有排除性，意味着在此比例尺下图层将不被显示出来。
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Minimum scale</p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(exclusive)</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">最小比例尺</p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">（排除性）</p></body></html>
-
-
- Maximum scale, i.e. minimum scale denominator. This limit is inclusive, that means the layer will be displayed on this scale.
- 最大比例尺，例如最小比例尺分母。该限制具有包含性，意味着在此比例尺下图层将被显示出来。
-
-
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Maximum scale</p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(inclusive)</p></body></html>
- <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">最大比例尺</p>
-<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">（包含性）</p></body></html>
-
-
- Current
- 当前
-
-
- Metadata
- 元数据
-
-
- Labels
- 标签
-
-
- Display labels
- 显示标签
-
-
- Actions
- 动作
-
Restore Default Style
@@ -60254,26 +50128,25 @@ p, li { white-space: pre-wrap; }
Save As Default
保存并设为默认
-
- Rendering
- 渲染
-
A widget to define the scale visibility
-
A widget to define the scale visibility.
-
Memory cache
-
+
+ Description
+ 描述
DataUrl
数据链接
+
+ Format
+ 格式
+
Attribution
@@ -60307,32 +50187,25 @@ p, li { white-space: pre-wrap; }
Type
类型
-
- Format
- 格式
-
LegendUrl
-
image/png
-
image/jpeg
-
image/jpg
-
样式
- Legend type
- 图例类型
-
-
- Transparency
- 透明度
+ Labels
+ 标签
Labels (deprecated)
标签（过时）
+
+ Display labels
+ 显示标签
+
字段
- Options
- 选项
+ General
+ 通用
- Update Extents
- 更新范围
+ Specify the coordinate reference system of the layer's geometry.
+ 为图层的几何图形指定坐标参照系。
- Maximum
- 最大值
-
-
- Minimum
- 最小值
-
-
- Provider-specific options
- 数据源特定选项
-
-
- Encoding
- 编码
+ Query Builder
+ 查询构建器
Display
显示
+
+ Rendering
+
Layer info
@@ -60441,12 +50316,9 @@ p, li { white-space: pre-wrap; }
更新范围
- <html><head/><body><p align="center"><span style=" font-size:0.75em;">Minimum<br>(exclusive)</span></p></body></html>
- <html><head/><body><p align="center"><span style=" font-size:0.75em;">最小<br>（排除性）</span></p></body></html>
-
-
- <html><head/><body><p align="center"><span style=" font-size:0.75em;">Maximum<br>(inclusive)</span></p></body></html>
- <html><head/><body><p align="center"><span style=" font-size:0.75em;">最大<br>（包含性）</span></p></body></html>
+ Scale dependent visibility
+ 依赖于地图比例尺的可见性
Simplify geometry
-
<b>Note:</b> Feature simplification may speed up rendering but can result in rendering inconsistencies
-
Simplification threshold (higher values result in more simplification):
-
Higher values result in more simplification
-
pixels
- 像素
+
Simplify on provider side if possible
-
Maximum scale at which the layer should be simplified (1:1 always simplifies):
-
显示为
- Description
- 描述
+ Metadata
+ 元数据
Abstract
摘要
+
+ Actions
+ 动作
+
Diagrams
图表
-
- Display diagrams
- 显示图表
-
-
- Diagram type
- 图表类型
-
-
- Priority:
- 优先级：
-
-
- Low
- 低
-
-
- High
- 高
-
-
- Appearance
- 外观
-
-
- Scale dependent visibility
- 依赖于地图比例尺的可见性
-
-
- Background color
- 背景颜色
-
-
- Pen color
- 画笔颜色
-
-
- Data defined position
- 由数据定义位置
-
-
- Pen width
- 画笔宽度
-
-
- Font...
- 字体...
-
-
- Size
- 大小
-
-
- Fixed size
- 固定大小
-
-
- Attribute
- 属性
-
-
- Find maximum value
- 查找最大值
-
-
- Size units
- 单位
-
-
- Position
- 位置
-
-
- Placement
- 位置
-
-
- Line Options
- 线条选项
-
-
- Distance
- 距离
-
-
- x
- 横坐标
-
-
- y
- 纵坐标
-
-
- Attributes
- 属性
-
-
- Color
- 颜色
-
-
- New column
- 新建字段
-
-
- Ctrl+N
- Ctrl+N
-
-
- Delete column
- 删除列
-
-
- Ctrl+X
- Ctrl+X
-
-
- Toggle editing mode
- 切换编辑模式
-
-
- Click to toggle table editing
- 点击切换表格编辑状态
-
-
- CRS
- 坐标参照系
-
-
- Specify the coordinate reference system of the layer's geometry.
- 为图层的几何图形指定坐标参照系。
-
-
- Specify CRS
- 指定坐标参照系
-
-
- Field calculator
- 字段计算器
-
-
- New symbology
- 新式符号
-
-
- ...
- ...
-
QgsVectorLayerSaveAsDialog
-
- SpatiaLite
- SpatiaLite
-
Layer CRS
@@ -60773,7 +50497,7 @@ p, li { white-space: pre-wrap; }
<Default>
-
Save vector layer as...
矢量图层另存为...
-
- Add saved file to map
- 将已保存的文件添加到地图中
-
-
- CRS
- 坐标参照系
-
-
- Save as
- 另存为
-
Browse
浏览
-
- Datasource Options
-
-
- Custom Options
-
-
- Layer Options
-
Encoding
编码
- Save only selected features
- CRS
+ 坐标参照系
Symbology export
导出符号
+
+ Datasource Options
+
+
+ Custom Options
+
+
+ Layer Options
+
+
+ Save as
+ 另存为
+
Format
格式
- OGR creation options
- OGR创建选项
+ Save only selected features
+
Skip attribute creation
跳过属性创建
+
+ Add saved file to map
+ 将已保存的文件添加到地图中
+
1:
@@ -60975,10 +50695,6 @@ p, li { white-space: pre-wrap; }
QgsWFSConnectionItem
-
- Failed to retrieve layers
- 获取图层失败
-
Edit...
@@ -60995,19 +50711,6 @@ p, li { white-space: pre-wrap; }
修改WFS连接
-
- QgsWFSData
-
- Abort
- 放弃
-
-
- Loading WFS data
-%1
- 正在载入WFS数据
-%1
-
-
QgsWFSProvider
@@ -61033,36 +50736,32 @@ p, li { white-space: pre-wrap; }
empty response
- 空的响应
+
WFS service exception:%1
- WFS服务异常：%1
+
unsuccessful service response: %1
- 不成功的服务响应：%1
+
WFS exception report (code=%1 text=%2)
- WFS异常报告（code=%1 text=%2）
+
missing
- 确实
+
unhandled response: %1
- 未处理的异常响应：%1
-
-
- Error
- 错误
+
@@ -61080,16 +50779,6 @@ p, li { white-space: pre-wrap; }
QgsWFSSourceSelect
-
- Confirm Delete
- 确认删除
-
-
- Are you sure you want to remove the %1 connection and all associated settings?
- 确定要移除连接%1及全部相关设置吗？
-
&Add
@@ -61110,11 +50799,21 @@ p, li { white-space: pre-wrap; }
Network Error
网络错误
+
+ Capabilities document is not valid
+ 性能文档无效
+
Server Exception
服务器异常
+
+ Error
+ 错误
+
No Layers
@@ -61125,11 +50824,6 @@ p, li { white-space: pre-wrap; }
capabilities document contained no layers.
性能文档不含图层。
-
- Capabilities document is not valid
- 性能文档无效
-
Create a new WFS connection
@@ -61140,6 +50834,16 @@ p, li { white-space: pre-wrap; }
Modify WFS connection
修改WFS连接
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+ 确定要移除连接%1及全部相关设置吗？
+
+
+ Confirm Delete
+ 确认删除
+
Load connections
@@ -61150,49 +50854,13 @@ p, li { white-space: pre-wrap; }
XML files (*.xml *XML)
XML文件(*.xml *.XML)
-
- Error
- 错误
-
QgsWFSSourceSelectBase
- Title
- 标题
-
-
- Name
- 名称
-
-
- Abstract
- 摘要
-
-
- Filter
- 过滤
-
-
- Change ...
- 更改...
-
-
- &New
- 新建(&N)
-
-
- Delete
- 删除
-
-
- Edit
- 编辑
+ Add WFS Layer from a Server
+ 从服务器中添加WFS层
Display WFS FeatureTypes containing this word in the title, name or abstract
显示标题、名称或摘要中包含这个词的WFS要素类型
+
+ Server connections
+ 服务器连接
+
C&onnect
连接 (&o)
+
+ &New
+ 新建(&N)
+
+
+ Edit
+ 编辑
+
+
+ Delete
+ 删除
+
Load connections from file
@@ -61235,43 +50923,15 @@ p, li { white-space: pre-wrap; }
Use title for layer name
使用标题作为图层名称
-
- Add WFS Layer from a Server
- 从服务器中添加WFS层
-
Coordinate reference system
坐标参照系
- Server connections
- 服务器连接
-
-
-
- QgsWKNDiagramFactoryWidgetBase
-
- Form
- 窗体
-
-
- 1
- 1
-
-
- Attributes
- 属性
-
-
- Add
- 添加
-
-
- Remove
- 移除
+ Change ...
+ 更改...
@@ -61284,24 +50944,20 @@ p, li { white-space: pre-wrap; }
QgsWMSConnectionItem
-
- Failed to retrieve layers
- 获取图层失败
-
Failed to parse WMS URI
-
Failed to download capabilities
-
Failed to parse capabilities
-
QgsWMSSourceSelect
+
+ &Add
+ 添加(&A)
+
+
+ Add selected layers to map
+ 将选中的图层添加到地图中
+
Are you sure you want to remove the %1 connection and all associated settings?
@@ -61334,22 +51000,6 @@ p, li { white-space: pre-wrap; }
Confirm Delete
确认删除
-
- WMS Provider
- WMS数据源
-
-
- Could not open the WMS Provider
- 无法打开WMS数据源
-
-
- Add selected layers to map
- 将选中的图层添加到地图中
-
Load connections
@@ -61365,49 +51015,46 @@ p, li { white-space: pre-wrap; }
encoding %1 not supported.
不支持%1编码。
+
+ WMS Provider
+ WMS数据源
+
+
+ Failed to parse WMS URI
+
+
+ Failed to download capabilities:
+
+
The server you are trying to connect to does not seem to be a WMS server. Please check the URL.
-
Instead of the capabilities string that was expected, the following response has been received:
%1
-
-
- Coordinate Reference System (%n available)
- crs count
-
- 坐标参照系（%n个可用）
-
-
-
- Select layer(s)
- 选择图层
-
-
- Failed to parse WMS URI
-
-
- Failed to download capabilities:
-
-
Options (%n coordinate reference systems available)
crs count
-
- 选项（%n个可用的坐标参照系）
-
+ 选项（%n个可用的坐标参照系）
+
+ Select layer(s)
+ 选择图层
Select either layer(s) or a tileset
选择图层或者瓦片集
+
+ Coordinate Reference System (%n available)
+ crs count
+ 坐标参照系（%n个可用）
No common CRS for selected layers.
@@ -61438,9 +51091,7 @@ p, li { white-space: pre-wrap; }
%n Layer(s) selected
selected layer count
-
- 选中了%n个图层
-
+ 选中了%n个图层
Confirm Overwrite
确认覆盖
-
- &Add
- 添加(&A)
-
QgsWMSSourceSelectBase
- Add Layer(s) from a Server
- 添加服务器上的图层
+ Ready
+ 就绪
- Save connections to file
- 将连接保存到文件
+ Layers
+ 图层
C&onnect
连接(&o)
-
- Add Layer(s) from a WM(T)S Server
-
&New
@@ -61560,6 +51202,16 @@ p, li { white-space: pre-wrap; }
Abstract
摘要
+
+ Image encoding
+ 位图编码
+
+
+ Save connections to file
+ 将连接保存到文件
+
Save
@@ -61575,6 +51227,31 @@ p, li { white-space: pre-wrap; }
Load
载入
+
+ Options
+ 选项
+
+
+ Layer name
+ 图层名称
+
+
+ Coordinate Reference System
+ 坐标参考系统
+
+
+ Add Layer(s) from a WM(T)S Server
+
+
+ Change ...
+ 更改...
+
Tile size
@@ -61632,14 +51309,6 @@ p, li { white-space: pre-wrap; }
Tilesets
瓦片集
-
- Styles
- 样式
-
-
- Size
- 大小
-
Format
@@ -61665,56 +51334,21 @@ p, li { white-space: pre-wrap; }
Search
搜索
-
- URL
- 网址
-
Description
描述
+
+ URL
+ 网址
+
Add selected row to WMS list
将选中的行添加到WMS列表中
-
- Image encoding
- 位图编码
-
-
- Layers
- 图层
-
-
- Options
- 选项
-
-
- Layer name
- 图层名称
-
-
- Coordinate Reference System
- 坐标参考系统
-
-
- Change ...
- 更改...
-
-
- Ready
- 就绪
-
QgsWcsCapabilities
@@ -61723,15 +51357,6 @@ p, li { white-space: pre-wrap; }
empty capabilities document
空的性能文档
-
- Version not supported
- 不受支持的版本
-
-
- The version %1 specified in connection URL parameter VERSION is not supported by QGIS
- 连接网址参数VERSION中指定的版本%1不受QGIS支持
-
+
+ Version not supported
+ 不受支持的版本
+
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
QGIS不支持WCS服务器版本%1（受支持的版本有：1.0.0，1.1.0，1.1.2）
-
- WCS server version %1 is not supported by Quantum GIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
- Quantum GIS不支持WCS服务器版本%1（受支持的版本有：1.0.0，1.1.0，1.1.2）
-
Could not get WCS capabilities: %1 at line %2 column %3
@@ -61826,7 +51452,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
- 地图请求错误（状态：%1；原因：%2；URL：%3）
+
WCS
- WCS
+
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
- 地图请求错误：<br>标题： %1<br>错误： %2<br>URL： <a href='%3'>%3</a>)
+
Map request error (Status: %1; Response: %2; URL:%3)
- 地图请求错误（状态：%1；原因：%2；URL：%3）
+
Cannot parse multipart response: %1
- 无法解析多部分响应：%1
+
Expected 2 parts, %1 received
- 期望两部分，但只接受到%1
+
More than 2 parts (%1) received
- 接收到的超过了两部分（%1）
+
Map request error (Title:%1; Error:%2; URL: %3)
- 地图请求错误（标题：%1；错误：%2；URL：%3）
+
Map request error (Response: %1; URL:%2)
- 地图请求错误（反馈：%1；URL：%2）
+
Content-Transfer-Encoding %1 not supported
- 内容-传输-编码 %1不支持
+
Map request failed [error:%1 url:%2]
- 地图请求失败 [错误：%1 地址：%2]
+
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
- 地图总大小%2字节，已下载%1字节。
+
@@ -61905,17 +51531,6 @@ Response was:
Cannot describe coverage
无法描述覆盖范围
-
- WCS
- WCS
-
Coverage not found
@@ -61936,6 +51551,17 @@ Response was:
Received coverage has wrong extent %1 (expected %2)
接收的覆盖范围区域（%1）不正确，应该为%2
+
+ WCS
+ WCS
+
Rotating raster
@@ -61956,42 +51582,6 @@ Response was:
Getting map via WCS.
正在通过WCS获取地图。
-
- Map request error (Status: %1; Reason phrase: %2; URL:%3)
- 地图请求错误（状态：%1；原因：%2；URL：%3）
-
-
- Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
- 地图请求错误：<br>标题： %1<br>错误： %2<br>URL： <a href='%3'>%3</a>)
-
-
- Cannot parse multipart response: %1
- 无法解析多部分响应：%1
-
-
- Map request error (Title:%1; Error:%2; URL: %3)
- 地图请求错误（标题：%1；错误：%2；URL：%3）
-
-
- Map request error (Status: %1; Response: %2; URL:%3)
- 地图请求错误（状态：%1；原因：%2；URL：%3）
-
-
- Expected 2 parts, %1 received
- 期望两部分，但只接受到%1
-
-
- More than 2 parts (%1) received
- 接收到的超过了两部分（%1）
-
-
- Map request error (Response: %1; URL:%2)
- 地图请求错误（反馈：%1；URL：%2）
-
-
- Content-Transfer-Encoding %1 not supported
- 内容-传输-编码 %1不支持
-
No data received
@@ -62002,35 +51592,11 @@ Response was:
Cannot create memory file
无法创建内存文件
-
- Map request failed [error:%1 url:%2]
- 地图请求失败 [错误：%1 地址：%2]
-
-
- Not logging more than 100 request errors.
- 不记录超过100个请求错误的记录。
-
-
- %1 of %2 bytes of map downloaded.
- 地图总大小%2字节，已下载%1字节。
-
Dom Exception
Dom异常
-
- Could not get WCS Service Exception at %1: %2 at line %3 column %4
-
-Response was:
-
-%5
- 无法获取WCS服务器异常：%1：%2，位置：行%3，列%4
-
-反馈信息：
-
-%5
-
Could not get WCS Service Exception at %1 at line %2 column %3
@@ -62038,12 +51604,12 @@ Response was:
Response was:
%4
-
Service Exception
- 服务异常
+
(and %n more)
crs
-
- （和额外的%n）
-
+ （和额外的%n）
栅格输入输出错误:
-
- QgsWebView
-
- Print
- 打印
-
-
QgsWebViewWidget
...
- ...
+
Select a file
- 选择一个文件
+
@@ -62297,22 +51854,22 @@ Response was:
Form
- 窗体
+
Field contains a filename or URL for a webpage
-
Width
- 宽度
+
Height
- 高度
+
@@ -62320,33 +51877,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
- 性能总大小%2字节，已下载%1字节。
+
Capabilities request redirected.
- 性能请求已被重定向。
+
Redirect loop detected: %1
- 监测到重定向循环：%1
+
WMS
- WMS
+
empty of capabilities: %1
- 权限为空：%1
+
Download of capabilities failed: %1
- 性能下载失败：%1
+
@@ -62354,7 +51911,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
- 地图请求错误（状态：%1；原因：%2；URL：%3）
+
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
- 返回的图像有瑕疵 [内容类型：%1；URL：%2]
+
Map request error (Title:%1; Error:%2; URL: %3)
- 地图请求错误（标题：%1；错误：%2；URL：%3）
+
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
- 地图请求错误 （状态：%1；反馈信息：%2；内容类型：%3；URL：%4）
+
Map request failed [error:%1 url:%2]
- 地图请求失败 [错误：%1 地址：%2]
+
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
- 地图总大小%2字节，已下载%1字节。
+
QgsWmsProvider
-
- Request contains a CRS not offered by the server for one or more of the Layers in the request.
- 请求的图层包含一个服务器无法提供的坐标参照系。
-
-
- Request contains a SRS not offered by the server for one or more of the Layers in the request.
- 请求的图层包含一个服务器无法提供的空间参照系统。
-
-
- GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
-
-
- Request is for a Layer in a Style not offered by the server.
-
-
- GetFeatureInfo request is applied to a Layer which is not declared queryable.
-
-
- GetFeatureInfo request contains invalid X or Y value.
- GetFeatureInfo请求（获取要素信息的请求）包含无效的横坐标和纵坐标值。
-
-
- Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
- 在GetCapabilities请求的更新频率参数（可选）与当前服务的更新频率一致。
-
-
- Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
- 在GetCapabilities请求的更新频率参数（可选）比当前服务的更新频率大。
-
-
- Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
-
-
- Request contains an invalid sample dimension value.
-
-
- Request is for an optional operation that is not supported by the server.
-
-
- The WMS vendor also reported:
-
-
- Property
- 属性
-
-
- Value
- 值
-
-
- Tile Layer Properties
- 瓦片图层属性
-
-
- WMS Version
- WMS版本
-
-
- Title
- 标题
-
Cannot parse URI
@@ -62512,6 +51976,18 @@ Response was:
Number of layers and styles don't match
图层数目和样式数目不匹配
+
+ WMS
+ WMS
+
Number of tile layers must be one
@@ -62527,36 +52003,190 @@ Response was:
Tile layer or tile matrix set not found
未找到瓦片图层或瓦片矩阵集
+
+ Getting map via WMS.
+ 通过WMS获取地图。
+
Getting tiles.
正在获取瓦片文件。
-
- Returned image is flawed [Content-Type:%1; URL: %2]
- 返回的图像有瑕疵 [内容类型：%1；URL：%2]
+
+ %n tile requests in background
+ tile request count
+ %n瓦片请求后台运行
+
+ , %n cache hits
+ tile cache hits
+ ，%n缓存成功
+
+ , %n cache misses.
+ tile cache missed
+ ，%n缓存丢失。
+
+ , %n errors.
+ errors
+ ，%n错误。
- Returned image is flawed [Content-Type:%1; URL:%2]
- 返回的图像有瑕疵 [内容类型：%1；URL：%2]
+ image is NULL
+ 位图为空
- Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
- 地图请求错误 （状态：%1；反馈信息：%2；内容类型：%3；URL：%4）
+ unexpected image size
+ 意想不到的位图大小
+
+
+ Status: %1
+Reason phrase: %2
+ 状态：%1
+原因：%2
Redirect loop detected: %1
监测到重定向循环：%1
+
+ Dom Exception
+ Dom异常
+
Service Exception
服务异常
- Extent for layer %1 not found in capabilities
- 图层%1范围在功能中未找到
+ Request contains a format not offered by the server.
+ 请求包含一个服务器未提供的格式。
+
+
+ Request contains a CRS not offered by the server for one or more of the Layers in the request.
+ 请求的图层包含一个服务器无法提供的坐标参照系。
+
+
+ Request contains a SRS not offered by the server for one or more of the Layers in the request.
+ 请求的图层包含一个服务器无法提供的空间参照系统。
+
+
+ GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
+
+
+ Request is for a Layer in a Style not offered by the server.
+
+
+ GetFeatureInfo request is applied to a Layer which is not declared queryable.
+
+
+ GetFeatureInfo request contains invalid X or Y value.
+ GetFeatureInfo请求（获取要素信息的请求）包含无效的横坐标和纵坐标值。
+
+
+ Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
+
+
+ Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
+
+
+ Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
+
+
+ Request contains an invalid sample dimension value.
+
+
+ Request is for an optional operation that is not supported by the server.
+
+
+ (No error code was reported)
+ （未报告任何错误代码）
+
+
+ (Unknown error code)
+ （未知错误代码）
+
+
+ The WMS vendor also reported:
+
+
+ Property
+ 属性
+
+
+ Value
+ 值
+
+
+ Name
+ 名称
+
+
+ Visibility
+ 可见性
+
+
+ Visible
+ 显示
+
+
+ Hidden
+ 隐藏
+
+
+ Title
+ 标题
Abstract
摘要
+
+ Can Identify
+ 可识别
+
+
+ Yes
+ 是
+
+
+ No
+ 否
+
+
+ Can be Transparent
+ 可透明
+
+
+ Can Zoom In
+ 可缩放
+
+
+ Cascade Count
+ 层叠数目
+
+
+ Fixed Width
+ 固定宽度
+
+
+ Fixed Height
+ 固定高度
+
+
+ Available in CRS
+ 坐标参照系中可用
+
+
+ (and %n more)
+ crs
+ （和额外的%n）
+
+ Available in style
+ 样式中可用
+
LegendURLs
-
+
+ Server Properties
+ 服务器属性
+
+
+ Selected Layers
+ 选中的图层
+
+
+ Other Layers
+ 其他图层
+
+
+ Tile Layer Properties
+ 瓦片图层属性
+
+
+ Cache Stats
+ 缓存状态
+
+
+ WMS Version
+ WMS版本
-
- GetLegendGraphic
-
-
- GetTileUrl
- GetTileUrl
-
-
- Tile templates
- 瓦片模板
-
-
- FeatureInfo templates
- 要素信息模板
-
-
- Identifier
-
-
- Tile mode
-
-
- WMTS
- WMTS
-
-
- WMS-C
- WMS-C
-
-
- Invalid tile mode
-
-
- Available Styles
- 可用的样式
-
-
- Available Tilesets
- 可用瓦片集
-
-
- Selected tile matrix set
-
-
- Scale
-
-
- Tile size [px]
-
-
- Tile size [mu]
-
-
- Matrix size
-
-
- Matrix extent [mu]
-
-
- Bounds
-
-
- Width
- 宽度
-
-
- Height
- 高度
-
-
- Top
- 顶部
-
-
- Left
- 左边
-
-
- Bottom
- 底部
-
-
- Right
- 右边
-
-
- %n missing row(s)
-
-
-
-
- Layer's upper bound: %1
-
-
- %n missing column(s)
-
-
-
-
- Layer's left bound: %1
-
-
- Layer's lower bound: %1
-
-
- Layer's right bound: %1
-
-
- Cache stats
- 缓存状态
-
-
- Context not fully specified (extent was defined but width and/or height was not).
-
-
- Cannot identify
-
-
- Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
-
- Cannot parse getfeatureinfo: %1
- 无法解析GetFeatureInfo（获取要素信息）：%1
-
-
- GetLegendGraphic request redirected.
-
-
- GetLegendGraphic request error
-
-
- Returned legend image is flawed [URL: %1]
-
-
- Download of GetLegendGraphic failed: %1
-
-
- %1 of %2 bytes of GetLegendGraphic downloaded.
-
-
- identify request redirected.
- 识别请求已被重定向。
-
-
- Selected
- 选中的
-
-
- Yes
- 是
-
-
- No
- 否
-
-
- Visibility
- 可见性
-
-
- Tile request error
- 瓦片请求错误
-
-
- Status: %1
-Reason phrase: %2
- 状态：%1
-原因：%2
-
-
- empty capabilities document
- 空的性能文档
-
-
- Request contains a format not offered by the server.
- 请求包含一个服务器未提供的格式。
-
-
- Visible
- 显示
-
-
- Hidden
- 隐藏
-
-
- Can Identify
- 可识别
-
-
- Can be Transparent
- 可透明
-
-
- Can Zoom In
- 可缩放
-
-
- Cascade Count
- 层叠数目
-
-
- Fixed Width
- 固定宽度
-
-
- Fixed Height
- 固定高度
-
-
- WGS 84 Bounding Box
- WGS 84 边框范围
-
-
- Available in CRS
- 坐标参照系中可用
-
-
- Available in style
- 样式中可用
-
-
- Name
- 名称
-
-
- Styles
- 样式
-
-
- CRS
- 坐标参照系
-
-
- Bounding Box
- 边框
-
-
- Hits
- 点击数
-
-
- Misses
- 缺失数
-
-
- Errors
- 错误
-
-
- Layer cannot be queried.
- 不能查询图层。
-
-
- Dom Exception
- Dom异常
-
-
- WMS
- WMS
-
-
- Getting map via WMS.
- 通过WMS获取地图。
-
-
- %n tile requests in background
- tile request count
-
- %n瓦片请求后台运行
-
-
-
- , %n cache hits
- tile cache hits
-
- ，%n缓存成功
-
-
-
- , %n cache misses.
- tile cache missed
-
- ，%n缓存丢失。
-
-
-
- , %n errors.
- errors
-
- ，%n错误。
-
-
-
- image is NULL
- 位图为空
-
-
- unexpected image size
- 意想不到的位图大小
-
-
- Tile request error (Title:%1; Error:%2; URL: %3)
- 瓦片请求错误（标题：%1；错误：%2；URL：%3）
-
-
- Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
- 瓦片请求错误（状态：%1；内容类型：%2；长度：%3；URL：%4）
-
-
- Tile request failed [error:%1 url:%2]
- 瓦片请求失败 [错误：%1 url：%2]
-
-
- Not logging more than 100 request errors.
- 不记录超过100请求错误的请求。
-
-
- Map request error (Status: %1; Reason phrase: %2; URL:%3)
- 地图请求错误（状态：%1；原因：%2；URL：%3）
-
-
- Map request error (Title:%1; Error:%2; URL: %3)
- 地图请求错误（标题：%1；错误：%2；URL：%3）
-
-
- Map request failed [error:%1 url:%2]
- 地图请求失败 [错误：%1 地址：%2]
-
-
-
-Tried URL: %1
-
-尝试了网址：%1
-
-
- Capabilities request redirected.
- 性能请求已被重定向。
-
-
- empty of capabilities: %1
- 权限为空：%1
-
-
- Download of capabilities failed: %1
- 性能下载失败：%1
-
-
- %1 of %2 bytes of capabilities downloaded.
- 性能总大小%2字节，已下载%1字节。
-
-
- %1 of %2 bytes of map downloaded.
- 地图总大小%2字节，已下载%1字节。
-
-
- (No error code was reported)
- （未报告任何错误代码）
-
-
- (Unknown error code)
- （未知错误代码）
-
-
- (and %n more)
- crs
-
- （和额外的%n）
-
-
-
- Server Properties
- 服务器属性
-
-
- Selected Layers
- 选中的图层
-
-
- Other Layers
- 其他图层
-
-
- Tileset Properties
- 瓦片集属性
-
-
- Cache Stats
- 缓存状态
+
GetFeatureInfoUrl
获取要素信息地址
+
+ GetLegendGraphic
+
+
+ GetTileUrl
+ GetTileUrl
+
+
+ Tile templates
+ 瓦片模板
+
+
+ FeatureInfo templates
+ 要素信息模板
+
+
+ Tileset Properties
+ 瓦片集属性
+
+
+ Identifier
+
+
+ Tile mode
+
+
+ WMTS
+ WMTS
+
+
+ WMS-C
+ WMS-C
+
+
+ Invalid tile mode
+
+
+ Selected
+ 选中的
+
+
+ Available Styles
+ 可用的样式
+
+
+ CRS
+ 坐标参照系
+
+
+ Bounding Box
+ 边框
+
+
+ Available Tilesets
+ 可用瓦片集
+
+
+ Selected tile matrix set
+
+
+ Scale
+
+
+ Tile size [px]
+
+
+ Tile size [mu]
+
+
+ Matrix size
+
+
+ Matrix extent [mu]
+
+
+ Bounds
+
+
+ Width
+
+
+ Height
+
+
+ Top
+
+
+ Left
+
+
+ Bottom
+
+
+ Right
+
+
+ %n missing row(s)
+
+
+ Layer's upper bound: %1
+
+
+ %n missing column(s)
+
+
+ Layer's left bound: %1
+
+
+ Layer's lower bound: %1
+
+
+ Layer's right bound: %1
+
+
+ Cache stats
+ 缓存状态
+
+
+ Hits
+ 点击数
+
+
+ Misses
+ 缺失数
+
+
+ Errors
+ 错误
+
Format not supported
不受支持的格式
+
+ Context not fully specified (extent was defined but width and/or height was not).
+
Get feature info request error (Title:%1; Error:%2; URL: %3)
@@ -63183,35 +52590,80 @@ Tried URL: %1
GML is not valid
GML无效
+
+ Cannot identify
+
+
+ Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
+
+
+ identify request redirected.
+ 识别请求已被重定向。
+
Map getfeatureinfo error %1: %2
地图获取要素信息错误%1：%2
+
+ Cannot parse getfeatureinfo: %1
+ 无法解析GetFeatureInfo（获取要素信息）：%1
+
Map getfeatureinfo error: %1 [%2]
地图获取要素信息错误：%1 [%2]
+
+ GetLegendGraphic request redirected.
+
+
+ GetLegendGraphic request error
+
+
+ Returned legend image is flawed [URL: %1]
+
+
+ Download of GetLegendGraphic failed: %1
+
+
+ %1 of %2 bytes of GetLegendGraphic downloaded.
+
QgsWmsTiledImageDownloadHandler
Tile request error
- 瓦片请求错误
+
Status: %1
Reason phrase: %2
- 状态：%1
-原因：%2
+
Tile request error (Title:%1; Error:%2; URL: %3)
- 瓦片请求错误（标题：%1；错误：%2；URL：%3）
+
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
- 瓦片请求错误（状态：%1；内容类型：%2；长度：%3；URL：%4）
+
Returned image is flawed [Content-Type:%1; URL: %2]
- 返回的图像有瑕疵 [内容类型：%1；URL：%2]
+
%n tile requests in background
tile request count
-
- %n瓦片请求后台运行
-
+
, %n cache hits
tile cache hits
-
- ，%n缓存成功
-
+
, %n cache misses.
tile cache missed
-
- ，%n缓存丢失。
-
+
, %n errors.
errors
-
- ，%n错误。
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
QgsWmtsDimensionsBase
-
- Dialog
- 对话框
-
Select dimensions
-
放弃...
-
- QuickPrintGuiBase
-
- Output
- 输出
-
-
- Map name
- 地图名称
-
-
RecordDialog
Record Metadata
-
@@ -63411,11 +52840,6 @@ Reason phrase: %2
Direction field
方向字段
-
- Reverse direction
- 反向
-
Value for forward direction
@@ -63436,6 +52860,16 @@ Reason phrase: %2
Speed field
速度字段
+
+ km/h
+ 公里/小时
+
+
+ m/s
+ 米/秒
+
Default settings
@@ -63456,6 +52890,11 @@ Reason phrase: %2
Forward direction
正向
+
+ Reverse direction
+ 反向
+
Cost
@@ -63471,20 +52910,6 @@ Reason phrase: %2
Speed
速度
-
- Units
- 单位
-
-
- km/h
- 公里/小时
-
-
- m/s
- 米/秒
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
RoadGraphPlugin
-
- About
- 关于
-
Settings
@@ -63663,41 +53084,6 @@ Reason phrase: %2
Road graph
路径图
-
- Close
- 关闭
-
-
-
- SEXTANTE
-
- Analysis
- 分析
-
-
- &SEXTANTE toolbox
- SEXTANTE工具箱(&S)
-
-
- &SEXTANTE modeler
- SEXTANTE建模(&S)
-
-
- &SEXTANTE history and log
- SEXTANTE历史和日志(&S)
-
-
- &SEXTANTE options and configuration
- SEXTANT选项和配置(&S)
-
-
- &SEXTANTE results viewer
- SEXTANTE结果查看器(&S)
-
-
- &SEXTANTE commander
- SEXTANTE命令(&S)
-
SLDatabase
@@ -63718,76 +53104,79 @@ Reason phrase: %2
未选择数据库或数据库尚未连接。
-
- SLDatabaseInfo
-
- Filename:
- 文件名：
-
-
- SQLite version
- SQLite版本
-
-
SaDbTableModel
+ Schema
- 模式
+ 模式
+ Table
- 表
+ 表
+ Type
- 类型
+ 类型
+ SRID
- 空间参考标识符
+ 空间参考标识符
+ Line Interpretation
- 线条插值
+ 线条插值
+ Geometry column
- 几何字段
+ 几何字段
+ Sql
- Sql
+ Sql
SaNewConnection
+ Save connection
- 保存连接
+ 保存连接
+ Should the existing connection %1 be overwritten?
- 是否要覆盖已存在的连接%1？
+ 是否要覆盖已存在的连接%1？
+ Failed to load interface
- 载入接口失败
+ 载入接口失败
+ Test connection
- 测试连接
+ 测试连接
+ Connection to %1 was successful
- 成功连接到%1
+ 成功连接到%1
+ Connection failed. Check settings and try again.
SQL Anywhere error code: %1
Description: %2
- 连接失败——检查设置然后再重试。
+ 连接失败——检查设置然后再重试。
SQL Anywhere错误代码：%1
描述：%2
@@ -63796,329 +53185,372 @@ SQL Anywhere错误代码：%1
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- 创建一个新的SQL Anywhere连接
+ 创建一个新的SQL Anywhere连接
+ Connection Information
- 连接信息
+ 连接信息
+ Name
- 名称
+ 名称
+ Host
- 主机
+ 主机
+ Port
- 端口
+ 端口
+ Server
- 服务器
+ 服务器
+ Database
- 数据库
+ 数据库
+ Connection Parameters
- 连接参数
+ 连接参数
+ Username
- 用户名
+ 用户名
+ Password
- 密码
+ 密码
+ Name of the new connection
- 新连接的名称
+ 新连接的名称
+ Name or IP address of computer hosting the database server (leave blank for local connections)
- 托管数据库服务器的主机的IP或名称（若为本地连接，请留空）
+ 托管数据库服务器的主机的IP或名称（若为本地连接，请留空）
+ Port number used by the database server (leave blank for default 2638)
- 数据库服务器所使用的端口（若使用默认的2638端口，请留空）
+ 数据库服务器所使用的端口（若使用默认的2638端口，请留空）
+ Name of the database server (leave blank for default server on host)
- 数据库服务器名称（若使用主机中的默认数据库服务器，请留空）
+ 数据库服务器名称（若使用主机中的默认数据库服务器，请留空）
+ Name of the database (leave blank for default database on server)
- 数据库名称（若使用服务器中的默认数据库，请留空）
+ 数据库名称（若使用服务器中的默认数据库，请留空）
+ Additional connection parameters
- 其他连接参数
+ 其他连接参数
+ Database username
- 数据库用户名
+ 数据库用户名
+ Database password
- 数据库密码
-
-
- Save Username
- 保存用户名
+ 数据库密码
+ Save the connection username in the registry
- 在注册表或文件中保存连接用户名
+ 在注册表或文件中保存连接用户名
+ Save Username
+ 保存用户名
+
+
+ &Test Connect
- 测试连接(&T)
-
-
- Save Password
- 保存密码
+ 测试连接(&T)
+ Save the connection password in the registry (WARNING: NOT SECURE)
- 在注册表或文件中保存连接密码（警告：不安全，有风险）
+ 在注册表或文件中保存连接密码（警告：不安全，有风险）
- Simple Encryption
- 简单加密
+ Save Password
+ 保存密码
+ Encrypt packets using simple encryption
- 使用简单加密算法加密数据包
+ 使用简单加密算法加密数据包
- Estimate table metadata
- 估算表格元数据
+ Simple Encryption
+ 简单加密
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
- 使用某些图层的属性估计值而非真实值以改善表现，例如基数、范围等等。
+ 使用某些图层的属性估计值而非真实值以改善表现，例如基数、范围等等。
- Search other users' tables
- 搜索其他用户的表格
+ Estimate table metadata
+ 估算表格元数据
+ Search for geometry columns in tables owned by other users
- 搜索表格中其他用户拥有的几何字段
-
-
-
- SaQueryBuilder
-
- Query Result
- 查询结果
-
-
- The where clause returned %n row(s).
- returned test rows
-
-
-
-
-
+ 搜索表格中其他用户拥有的几何字段
- Query Failed
- 查询失败
+ Search other users' tables
+ 搜索其他用户的表格
SaSourceSelect
+ &Add
- 添加(&A)
-
-
- &Build Query
- 构建查询(&B)
+ 添加(&A)
+ &Set Filter
- 设置过滤(&S)
+ 设置过滤(&S)
+ Wildcard
- 通配符
+ 通配符
+ RegExp
- 正则表达式
+ 正则表达式
+ All
- 全部
+ 全部
+ Schema
- 模式
+ 模式
+ Table
- 表格
+ 表格
+ Type
- 类型
+ 类型
+ SRID
- 空间参考标识符
+ 空间参考标识符
+ Line Interpretation
- 线条插值
+ 线条插值
+ Geometry column
- 几何字段
+ 几何字段
+ Sql
- Sql
+ Sql
+ Are you sure you want to remove the %1 connection and all associated settings?
- 确定要移除连接%1及全部相关设置吗？
+ 确定要移除连接%1及全部相关设置吗？
+ Confirm Delete
- 确认删除
+ 确认删除
+ Select Table
- 选择表格
+ 选择表格
+ You must select a table in order to add a layer.
- 要添加图层，你必须选择一个表格。
+ 要添加图层，你必须选择一个表格。
+ Failed to load interface
- 载入接口失败
+ 载入接口失败
+ Connection failed
- 连接失败
+ 连接失败
+ Connection to database %1 failed. Check settings and try again.
SQL Anywhere error code: %2
Description: %3
- 连接到数据库%1失败。请检查设置然后在重试。
+ 连接到数据库%1失败。请检查设置然后在重试。
SQL Anywhere错误代码：%2
描述：%3
+ No accessible tables found
- 找不到可访问的表格
+ 找不到可访问的表格
+ Database connection was successful, but no tables containing geometry columns were %1.
- 数据库连接成功，但没有%1包含几何图形的表格。
+ 数据库连接成功，但没有%1包含几何图形的表格。
+ found
- 找到
+ 找到
+ found in your schema
- 在你的模式中找到
+ 在你的模式中找到
SaSourceSelectBase
+ Add SQL Anywhere layer
- 添加SQL Anywhere图层
+ 添加SQL Anywhere图层
+ SQL Anywhere Connections
- SQL Anywhere 连接
+ SQL Anywhere 连接
+ Delete
- 删除
+ 删除
+ Edit
- 编辑
+ 编辑
+ New
- 新建
+ 新建
+ Connect
- 连接
+ 连接
+ Search options
- 搜索选项
+ 搜索选项
+ Search
- 搜索
+ 搜索
+ Search mode
- 搜索模式
+ 搜索模式
+ Search in columns
- 搜索列
+ 搜索列
SaveAsPythonScriptAction
I/O error
- 输入/输出错误
+ 输入/输出错误
Unable to save edits. Reason:
- %1
- 无法保存编辑。原因：
- %1
+ %s
+
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
-
I/O error
- 输入/输出错误
+
Unable to save edits. Reason:
%s
-
-
- Script was correctly saved.
- 脚本已正确保存。
+
@@ -64133,11 +53565,6 @@ SQL Anywhere错误代码：%2
Server Connections
服务器连接
-
- C&onnect
- 连接 (&o)
-
Edit
@@ -64153,6 +53580,16 @@ SQL Anywhere错误代码：%2
&New
新建(&N)
+
+ C&onnect
+ 连接 (&o)
+
+
+ Subdatasets
+ 子数据集
+
Selection
@@ -64168,11 +53605,6 @@ SQL Anywhere错误代码：%2
Ready
就绪
-
- Subdatasets
- 子数据集
-
SettingsDialogPythonConsole
@@ -64190,121 +53622,109 @@ SQL Anywhere错误代码：%2
Font and Colors
-
- Font
- 字体
-
-
- Size
- 大小
+
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
- 备注：
+
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
自动补全
-
- Autocompletion threshold
- 自动补全阈值
-
-
- Error:
-
from Document
从文档
-
- Get autocompletion from installed APIs
- 从已安装的API获取自动补全
-
-
- from APIs files
- 从API文件
-
从文档和API文件
- Enable Object Inspector (switching between tabs may be slow)
- 启用对象检查器（标签页间切换时可能会较慢）
+ Get autocompletion from installed APIs
+ 从已安装的API获取自动补全
+
+
+ from APIs files
+ 从API文件
+
+
+ Autocompletion threshold
+ 自动补全阈值
+
+
+ Error:
+
Automatic parentheses insertion
自动插入括号
+
+ Font
+ 字体
+
+
+ Size
+ 大小
+
+
+ Enable Object Inspector (switching between tabs may be slow)
+ 启用对象检查器（标签页间切换时可能会较慢）
+
Console
@@ -64401,68 +53833,11 @@ SQL Anywhere错误代码：%2
Compile APIs...
编译API...
-
- API file
- API文件
-
-
- Browse
- 浏览
-
-
- Using preloaded API file
- 使用预载入的API文件
-
Settings Python Console
设置Python控制台
-
- SextanteToolbox
-
- SEXTANTE Toolbox
- SEXTANTE工具箱
-
-
- Click here to learn more
-about SEXTANTE
- 点此获取关于SEXTANTE的更多信息
-
-
- Click here to configure
-additional algorithm providers
- 点此以配置额外的算法供应源
-
-
- Enter algorithm name to filter list
- 请输入算法名称
-
-
- Search...
- 搜索...
-
-
- Execute
- 执行
-
-
- Execute as batch process
- 以批量处理方式执行
-
-
- Edit rendering styles for outputs
- 编辑输出的渲染风格
-
-
- Warning
- 警告
-
-
- Recently used algorithms
- 最近使用过的算法
-
-
SimplifyLineDialog
@@ -64481,30 +53856,27 @@ additional algorithm providers
确定
-
- SpatiaLiteDBConnector
-
- "%s" not found
- 未找到“%s”
-
-
SqlAnywhere
+ Add SQL Anywhere Layer...
- 添加SQL Anywhere图层...
+ 添加SQL Anywhere图层...
+ Store vector layers within a SQL Anywhere database
- 在SQL Anywhere数据库中存储矢量图层
+ 在SQL Anywhere数据库中存储矢量图层
+ Invalid Layer
- 无效的图层
+ 无效的图层
+ %1 is an invalid layer and cannot be loaded.
- %1是一个无效的图层，无法载入。
+ %1是一个无效的图层，无法载入。
@@ -64519,14 +53891,6 @@ additional algorithm providers
Unit
单位
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
Opacity
@@ -64538,8 +53902,9 @@ additional algorithm providers
颜色
- Symbol
- 符号
+ Open Library
+
Symbols in group
-
-
- Open Library
-
-
- Saved styles
- 保存样式
+
Symbol Name
符号名称
-
- Style
- 样式
-
Advanced
@@ -64665,24 +54017,6 @@ additional algorithm providers
Geometry
几何图形
-
- Created output shapefile:
-%s
-%s
-
-
- Created output shapefile:
-%s
-%s
-
-Would you like to add the new layer to the TOC?
- 已创建输出shape文件：
-%s
-%s
-
-要将新图层添加到地图视图中吗？
-
Error loading output shapefile:
%s
@@ -64691,21 +54025,9 @@ Would you like to add the new layer to the TOC?
Created output shapefile:
-%1
-%2
-
-Would you like to add the new layer to the TOC?
- 已创建输出shape文件：
-%1
-%2
-
-要将新图层添加到地图视图中吗？
-
-
- Error loading output shapefile:
-%1
- 载入以下输出shape文件时出错：
-%1
+%s
+%s
+
Feature
@@ -64781,15 +54103,7 @@ Would you like to add the new layer to the TOC?
Force point inside polygon
-
-
- Marker
- 标记
-
-
- Change
- 更改
+
@@ -64799,22 +54113,6 @@ Would you like to add the new layer to the TOC?
Form
窗体
-
- Settings
- 设置
-
-
- Border color
- 边界颜色
-
-
- Change
- 更改
-
-
- Fill color
- 填充颜色
-
Colors
@@ -64830,53 +54128,40 @@ Would you like to add the new layer to the TOC?
Border
边界
-
- Symbol width
- 符号宽度
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
Left
- 左边
+
HCenter
-
Right
- 右边
+
Top
- 顶部
+
VCenter
-
Bottom
- 底部
+
Outline style
-
轮廓宽度
- Symbol height
- 符号高度
+ Rotation
+ 旋转
Anchor point
-
横、纵坐标偏移
- Rotation
- 旋转
+ Symbol width
+ 符号宽度
- Data defined settings
- 由数据定义设置
-
-
- Outline color
- 轮廓颜色
-
-
- Shape
- 形状
+ Symbol height
+ 符号高度
@@ -64929,18 +54207,49 @@ Would you like to add the new layer to the TOC?
窗体
- Font family
- 字体系列
+ Offset X,Y
+ 横、纵坐标偏移
- Color
- 颜色
+ Rotation
+ 旋转角度
- Change
- 更改
+ Anchor point
+
+
+ Left
+
+
+ HCenter
+
+
+ Right
+
+
+ Top
+
+
+ VCenter
+
+
+ Bottom
+
大小
- Millimeter
- 毫米
+ Color
+ 颜色
- Map unit
- 地图单位
-
-
- Rotation
- 旋转角度
+ Font family
+ 字体系列
°
°
-
- Offset X,Y
- 横、纵坐标偏移
-
-
- Anchor point
-
-
- Left
- 左边
-
-
- HCenter
-
-
- Right
- 右边
-
-
- Top
- 顶部
-
-
- VCenter
-
-
- Bottom
- 底部
-
WidgetGradientFill
Form
- 窗体
+
Two color
-
Color ramp
- 颜色渐变
+
Gradient type
-
Linear
- 线性
+
Radial
-
Conical
-
Coord mode
-
Object
-
Viewport
-
Spread
-
Pad
-
Repeat
-
Reflect
-
Reference Point 1
-
x
- 横坐标
+
y
- 纵坐标
+
Feature centroid
-
Reference Point 2
-
Angle
- 角度
+
°
- °
+
Data defined properties...
- 数据定义的属性...
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
+
Offset X,Y
- 横、纵坐标偏移
-
-
-
- WidgetLineDecoration
-
- Form
- 窗体
-
-
- Color
- 颜色
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
-
- Change
- 改变
-
-
- Pen width
- 画笔宽度
+
@@ -65174,39 +54405,15 @@ Would you like to add the new layer to the TOC?
Angle
角度
-
- Distance
- 距离
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
-
- Line width
- 线条宽度
-
-
- Color
- 颜色
-
Data defined properties...
数据定义的属性...
- Change
- 更改
-
-
- Outline
- 轮廓
+ Distance
+ 距离
Form
窗体
-
- Marker
- 标记
-
-
- Line offset
- 线条偏移
-
-
- Change
- 更改
-
Marker placement
@@ -65244,14 +54438,6 @@ Would you like to add the new layer to the TOC?
with interval
间隔分布，间距
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
on every vertex
@@ -65270,13 +54456,18 @@ Would you like to add the new layer to the TOC?
Offset along line
-
Rotate marker
旋转标记
+
+ Line offset
+ 线条偏移
+
Data defined properties
@@ -65295,37 +54486,11 @@ Would you like to add the new layer to the TOC?
Form
窗体
-
- Marker
- 标记
-
-
- Change
- 更改
-
-
- Horizontal distance
- 水平距离
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
Vertical distance
垂直距离
-
- Horizontal displacement
- 水平位移
-
Vertical displacement
@@ -65336,6 +54501,16 @@ Would you like to add the new layer to the TOC?
Data defined properties...
数据定义的属性...
+
+ Horizontal displacement
+ 水平位移
+
+
+ Horizontal distance
+ 水平距离
+
WidgetSVGFill
@@ -65345,23 +54520,20 @@ Would you like to add the new layer to the TOC?
窗体
- Texture width
- 纹理宽度
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
+ Border width
+ 边界宽度
Rotation
旋转角度
+
+ Texture width
+ 纹理宽度
+
Colors
@@ -65382,27 +54554,6 @@ Would you like to add the new layer to the TOC?
Data defined properties...
数据定义的属性...
-
- Color
- 颜色
-
-
- Border color
- 边界颜色
-
-
- Border width
- 边界宽度
-
-
- Outline
- 轮廓
-
-
- Change
- 更改
-
SVG Groups
@@ -65424,65 +54575,57 @@ Would you like to add the new layer to the TOC?
Form
- 窗体
+
Gradient colors
-
Two color
-
Color ramp
- 颜色渐变
+
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
+
Blur strength
-
Offset X,Y
- 横、纵坐标偏移
+
Data defined properties...
- 数据定义的属性...
+
@@ -65493,18 +54636,20 @@ Would you like to add the new layer to the TOC?
窗体
- Color
- 颜色
+ Offset X,Y
+ 横、纵坐标偏移
+
+
+ Border width
+ 边界宽度
Fill style
填充样式
-
- Border color
- 边界颜色
-
Colors
@@ -65518,25 +54663,7 @@ Would you like to add the new layer to the TOC?
Join style
- 连接样式
-
-
- Border width
- 边界宽度
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
-
- Offset X,Y
- 横、纵坐标偏移
+
Border
边界
-
- Change
- 更改
-
WidgetSimpleLine
@@ -65570,19 +54693,16 @@ Would you like to add the new layer to the TOC?
Color
颜色
+
+ Change
+ 更改
+
Pen width
画笔宽度
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
Offset
@@ -65604,9 +54724,9 @@ Would you like to add the new layer to the TOC?
端点样式
- Change
- 更改
+ Use custom dash pattern
+ 使用自定义横线样式
Draw line only inside polygon
-
-
- Use custom dash pattern
- 使用自定义横线样式
+
@@ -65637,12 +54752,9 @@ Would you like to add the new layer to the TOC?
窗体
- Border color
- 边界颜色
-
-
- Fill color
- 填充颜色
+ Size
+ 大小
Border
边界
-
- Size
- 大小
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
Outline style
-
Outline width
轮廓宽度
+
+ Anchor point
+
+
+ Left
+
+
+ HCenter
+
+
+ Right
+
+
+ Top
+
+
+ VCenter
+
+
+ Bottom
+
+
+ Data defined properties...
+ 数据定义的属性...
+
+
+ Colors
+ 颜色
+
Angle
@@ -65692,55 +54836,6 @@ Would you like to add the new layer to the TOC?
Offset X,Y
横、纵坐标偏移
-
- Anchor point
-
-
- Left
- 左边
-
-
- HCenter
-
-
- Right
- 右边
-
-
- Top
- 顶部
-
-
- VCenter
-
-
- Bottom
- 底部
-
-
- Data defined properties...
- 数据定义的属性...
-
-
- Colors
- 颜色
-
-
- Change
- 更改
-
WidgetSvgMarker
@@ -65749,24 +54844,6 @@ Would you like to add the new layer to the TOC?
Form
窗体
-
- Size
- 大小
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
-
- Angle
- 角度
-
Colors
@@ -65790,59 +54867,57 @@ Would you like to add the new layer to the TOC?
Anchor point
-
Left
- 左边
+
HCenter
-
Right
- 右边
+
Top
- 顶部
+
VCenter
-
Bottom
- 底部
+
Data defined properties...
数据定义的属性...
-
- Change
- 更改
-
-
- Color
- 颜色
-
Border width
边界宽度
- Border color
- 边界颜色
+ Angle
+ 角度
+
+
+ Size
+ 大小
Form
窗体
-
- X attribute
- 横坐标属性
-
Y attribute
@@ -65915,15 +54985,20 @@ Would you like to add the new layer to the TOC?
Scale
比例
+
+ X attribute
+ 横坐标属性
+
Vector field type
矢量字段类型
- Cartesian
- 直角坐标
+ Height only
+ 仅高度
极坐标
- Distance unit
- 距离单位
-
-
- Millimeter
- 毫米
-
-
- Map unit
- 地图单位
-
-
- Height only
- 仅高度
+ Cartesian
+ 直角坐标
顺时针方向自北
- LineStyle
- 线条样式
-
-
- change
- 更改
+ Distance unit
+ 距离单位
@@ -65992,17 +55051,17 @@ Would you like to add the new layer to the TOC?
XML Request / Response
-
Request
-
Response
-
@@ -66035,10 +55094,6 @@ Would you like to add the new layer to the TOC?
Validate Extent
验证范围
-
- Toggle Error Markers
- 切换错误标记
-
Topology not checked yet
@@ -66157,7 +55212,7 @@ Run topology check again.
context_help
- <h3>Database connection</h3>
<h3>数据库连接</h3>
@@ -66202,7 +55257,7 @@ On this tab you can search for WMS servers. It is possible to enter a search-str
To visualize the results, select an table entry, press the <label>Add selected row to WMS list</label> button and change back to the <label>Servers</label> tab.<p>
You only need to request the list of layers by clicking the <label>Connect</label> button.
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -66291,7 +55346,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -66301,7 +55356,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>New OGR Database Connection Dialog</h3>
-
- <h3>Identify</h3>
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
- <h3>识别鉴定</h3>
+
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -67744,27 +56872,37 @@ Click on one of the icons along the top of the composer window to select what ty
dxf2shpConverterGui
-
- Polygon
- 多边形
-
-
- Point
- 点
-
Dxf Importer
DXF导入工具
+
+ Input and output
+ 输入输出
+
+
+ Input DXF file
+ 输入DXF文件
+
...
...
+
+ Output file
+ 输出文件
+
+
+ Export text labels
+ 导出文本标签
+
Output file type
@@ -67776,9 +56914,14 @@ Click on one of the icons along the top of the composer window to select what ty
折线
- Export text labels
- 导出文本标签
+ Polygon
+ 多边形
+
+
+ Point
+ 点
DXF files
DXF文件
-
- Shapefile
- Shape文件
-
Choose a file name to save to
选择一个文件名以保存文件
- Input and output
- 输入输出
-
-
- Input DXF file
- 输入DXF文件
-
-
- Output file
- 输出文件
+ Shapefile
+ Shape文件
@@ -67932,6 +57060,11 @@ For support send a mail to scala@itc.cnr.it
Error: No database name entered
错误：未输入数据库名称
+
+ Connection to [%1.%2] established
+ 到[%1.%2]的连接已经建立
+
connected
@@ -67942,26 +57075,16 @@ For support send a mail to scala@itc.cnr.it
Tables
表格
-
- Error: Parse error at line %1, column %2: %3
- 错误：第%1行第%2列解析错误：%3
-
-
- Error: A database connection is not currently established
- 错误：数据库连接还未建立
-
-
- Connection to [%1.%2] established
- 到[%1.%2]的连接已经建立
-
Connection to [%1.%2] failed: %3
连接到[%1.%2]失败：%3
+
+ Error: Parse error at line %1, column %2: %3
+ 错误：第%1行第%2列解析错误：%3
+
Error: Unabled to open file [%1]
@@ -67977,35 +57100,25 @@ For support send a mail to scala@itc.cnr.it
Error: Could not create temporary file, process halted
错误：无法创建临时文件，进程终止
+
+ Error: A database connection is not currently established
+ 错误：数据库连接还未建立
+
eVisDatabaseConnectionGuiBase
-
- Username
- 用户名
-
-
- Connect
- 连接
-
-
- Password
- 密码
-
-
- Port
- 端口
-
Database Connection
数据库连接
+
+ Predefined Queries
+ 预定义查询
+
Load predefined queries
@@ -68021,6 +57134,11 @@ For support send a mail to scala@itc.cnr.it
The description of the selected query.
所选查询的描述。
+
+ Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
+ 从下拉列表中选择预定义查询语句，这些查询语句来自经由上面的‘打开文件’图标按钮加载的文件。要执行查询，你需要点击SQL查询选项卡，接着你选择的查询语句会自动加载到查询窗口中。
+
not connected
@@ -68030,7 +57148,7 @@ For support send a mail to scala@itc.cnr.it
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
@@ -68057,6 +57175,11 @@ p, li { white-space: pre-wrap; }
Enter the name of the database.
输入数据库的名称。
+
+ Username
+ 用户名
+
Enter the port through which the database must be accessed if a MYSQL database is used.
@@ -68067,6 +57190,11 @@ p, li { white-space: pre-wrap; }
Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established.
使用上面选择的参数连接数据库。如果连接成功，下面的输出控制台上会显示一条消息，告知连接已经建立。
+
+ Connect
+ 连接
+
User name to access the database.
@@ -68082,11 +57210,21 @@ p, li { white-space: pre-wrap; }
Database Name
数据库名称
+
+ Password
+ 密码
+
Database Type
数据库类型
+
+ Port
+ 端口
+
SQL Query
@@ -68117,16 +57255,6 @@ p, li { white-space: pre-wrap; }
Output Console
输出控制台
-
- Predefined Queries
- 预定义查询
-
-
- Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
- 从下拉列表中选择预定义查询语句，这些查询语句来自经由上面的‘打开文件’图标按钮加载的文件。要执行查询，你需要点击SQL查询选项卡，接着你选择的查询语句会自动加载到查询窗口中。
-
eVisDatabaseLayerFieldSelectionGuiBase
@@ -68168,6 +57296,11 @@ p, li { white-space: pre-wrap; }
eVisGenericEventBrowserGui
+
+ Generic Event Browser
+ 通用事件浏览器
+
Field
@@ -68186,17 +57319,6 @@ p, li { white-space: pre-wrap; }
Warning
警告
-
- Error
- 错误
-
-
- Generic Event Browser
- 通用事件浏览器
-
No active layers found
未找到活动图层
+
+ Error
+ 错误
+
Unable to connect to either the map canvas or application interface
@@ -68219,11 +57347,22 @@ p, li { white-space: pre-wrap; }
An invalid feature was received during initialization
初始化过程中收到一个无效要素
+
+ Event Browser - Displaying records 01 of %1
+ 事件浏览器——显示%1条记录中的第01条
+
Attribute Contents
属性内容
+
+ Event Browser - Displaying records %1 of %2
+ 事件浏览器——显示%2条记录中的第%1条
+
Select Application
@@ -68234,17 +57373,6 @@ p, li { white-space: pre-wrap; }
All ( * )
全部 ( * )
-
- Event Browser - Displaying records 01 of %1
- 事件浏览器——显示%1条记录中的第01条
-
-
- Event Browser - Displaying records %1 of %2
- 事件浏览器——显示%2条记录中的第%1条
-
eVisGenericEventBrowserGuiBase
@@ -68253,31 +57381,16 @@ p, li { white-space: pre-wrap; }
Display
显示
-
- Previous
- 上一个
-
-
- 1
- 1
-
-
- Options
- 选项
-
-
- Manual
- 手动
-
Use the Previous button to display the previous photo when more than one photo is available for display.
当有多个相片可供显示时，可以点击“上一个”按钮来显示上一个相片。
+
+ Previous
+ 上一个
+
Use the Next button to display the next photo when more than one photo is available for display.
@@ -68291,7 +57404,12 @@ p, li { white-space: pre-wrap; }
All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green.
-
+
+ 1
+ 1
Display area for the image.
显示图像面积。
+
+ Options
+ 选项
+
+
+ File path
+ 文件路径
+
+
+ Attribute containing path to file
+ 含有文件路径的属性
+
Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
-
+
+ If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
+
+
+ Path is relative
+ 相对路径
If checked, the relative path values will be saved for the next session.
如果选中，相对路径值将在下次会话中保存。
+
+ Remember this
+ 记住
+
Resets the values on this line to the default setting.
重置该线上的值为默认值。
-
- If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
-
-
- Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
-
-
- If checked, the Display Compass Bearing values will be saved for the next session.
-
-
- A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
-
- Define the compass offset using a field from the vector layer attribute table.
-
-
- From Attribute
- 来自属性
-
-
- Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
-
- Define the compass offset manually.
- 手动设置指南针偏移。
-
-
- If checked, the compass offset values will be saved for the next session.
-
-
- Resets the compass offset values to the default settings.
-
-
- The base path or url from which images and documents can be “relative”
-
-
- Base Path
- 基本路径
-
-
- The Base Path onto which the relative path defined above will be appended.
-
-
- If checked, the Base Path will be saved for the next session.
-
-
- If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
-
-
- Replace entire path/url stored in image path attribute with user defined
-Base Path (i.e. keep only filename from attribute)
-
-
- If checked, the current check-box setting will be saved for the next session.
-
-
- Clears the check-box on this line.
- 清空该线上的复选框。
-
-
- Apply Path to Image rules when loading docs in external applications
-
-
- Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
-
-
- Configure External Applications
- 设置外部应用程序
-
-
- File extension and external application in which to load a document of that type
- 文件扩展名及用以打开该类型文档的外部应用程序
-
-
- A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
-
-
- Extension
- 扩展名
-
-
- Application
- 应用程序
-
-
- Add new file type
- 添加新文件类型
-
-
- Add a new file type with a unique extension and the path for the application that can open the file.
-
-
- Delete current row
- 删除当前行
-
-
- Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
-
-
- If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
-
-
- Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
-
-
- If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
-
-
- File path
- 文件路径
-
-
- Attribute containing path to file
- 含有文件路径的属性
-
-
- Path is relative
- 相对路径
-
-
- Remember this
- 记住
-
Attribute containing compass bearing
包含罗盘方位的属性
+
+ Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
+
+
+ If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
+
Display compass bearing
显示罗盘方位
+
+ If checked, the Display Compass Bearing values will be saved for the next session.
+
Compass offset
罗盘偏移
+
+ Define the compass offset manually.
+ 手动设置指南针偏移。
+
+
+ Manual
+ 手动
+
+
+ A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
+
+
+ Define the compass offset using a field from the vector layer attribute table.
+
+
+ From Attribute
+ 来自属性
+
+
+ Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
+
+
+ If checked, the compass offset values will be saved for the next session.
+
+
+ Resets the compass offset values to the default settings.
+
Relative paths
相对路径
+
+ The base path or url from which images and documents can be “relative”
+
+
+ Base Path
+ 基本路径
+
+
+ The Base Path onto which the relative path defined above will be appended.
+
+
+ If checked, the Base Path will be saved for the next session.
+
+
+ Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
+
+
+ If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
+
+
+ Replace entire path/url stored in image path attribute with user defined
+Base Path (i.e. keep only filename from attribute)
+
+
+ If checked, the current check-box setting will be saved for the next session.
+
+
+ Clears the check-box on this line.
+ 清空该线上的复选框。
+
+
+ If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
+
+
+ Apply Path to Image rules when loading docs in external applications
+
+
+ Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
+
+
+ Configure External Applications
+ 设置外部应用程序
+
+
+ File extension and external application in which to load a document of that type
+ 文件扩展名及用以打开该类型文档的外部应用程序
+
+
+ A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
+
+
+ Extension
+ 扩展名
+
+
+ Application
+ 应用程序
+
+
+ Add new file type
+ 添加新文件类型
+
+
+ Add a new file type with a unique extension and the path for the application that can open the file.
+
+
+ Delete current row
+ 删除当前行
+
+
+ Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
+
eVisImageDisplayWidget
@@ -68561,37 +57689,37 @@ Base Path (i.e. keep only filename from attribute)
Zoom in
放大
+
+ Zoom in to see more detail.
+ 放大以查看细节。
+
Zoom out
缩小
-
- Zoom to full extent
- 全图显示
-
Zoom out to see more area.
缩小以查看更大的范围。
+
+ Zoom to full extent
+ 全图显示
+
Zoom to display the entire image.
缩放以显示整幅位图。
-
- Zoom in to see more detail.
- 放大以查看细节。
-
fTools
- Quantum GIS version detected:
- 检测到Quantum GIS版本：
+ QGIS version detected:
+ 检测到Quantum GIS版本：
This version of fTools requires at least QGIS version 1.0.0
@@ -68599,18 +57727,6 @@ Plugin will not be enabled.
该版本的fTools要求QGIS版本最低为1.0.0
不能启用插件。
-
- Create spatial index
- 创建空间索引
-
-
- Vect&or
- 矢量(&O)
-
-
- QGIS version detected:
- 检测到Quantum GIS版本：
-
&Analysis Tools
分析工具(&A)
@@ -68791,11 +57907,15 @@ Plugin will not be enabled.
Merge shapefiles to one
合并shape文件
+
+ Create spatial index
+ 创建空间索引
+
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -68811,1857 +57931,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -70714,10 +59780,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -70731,10 +59797,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -70755,10 +59821,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -70771,12 +59837,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -70792,16 +59858,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -70830,15 +59896,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -70855,17 +59921,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -70879,17 +59945,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -70905,16 +59971,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -70928,10 +59994,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -70944,10 +60010,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -70961,12 +60027,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -70980,12 +60046,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -71000,17 +60066,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -71020,10 +60086,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -71038,12 +60104,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -71057,12 +60123,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -71076,10 +60142,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -71096,12 +60162,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -71115,17 +60181,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -71140,10 +60206,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -71154,12 +60220,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -71173,17 +60239,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -71196,12 +60262,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -71218,14 +60284,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -71239,15 +60305,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -71256,15 +60322,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -71295,14 +60361,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -71321,14 +60387,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -71433,12 +60499,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -71452,10 +60518,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -71469,10 +60535,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -71489,10 +60555,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -71508,9 +60574,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -71539,23 +60605,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Point y ordinate
点的纵坐标
-
- Point x coordinate
- 点的横坐标
-
-
- Point y coordinate
- 点的纵坐标
-
-
-
- geoprocessingThread
-
- Following field names are longer than 10 characters:
-%s
- 以下字段名称长度超过10个字符：
-%s
-
grasslabel
@@ -71697,17 +60746,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Calculate average of raster within areas with the same category in a user-defined base map
-
Calculate covariance/correlation matrix for user-defined rasters
-
Calculate error matrix and kappa parameter for accuracy assessment of classification result
-
Calculate linear regression from two rasters: y = a + b*x
-
Calculate median of raster within areas with the same category in a user-defined base map
-
Calculate mode of raster within areas with the same category in a user-defined base map
-
Calculate optimal index factor table for LANDSAT-TM raster
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Cats
-
Cats (select from the map or using their id)
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Compares bit patterns with raster
-
Connect selected nodes by shortest tree (Steiner tree)
-
Convert bearing and distance measurements to coordinates and vice versa
-
Create 3D volume map based on 2D elevation and value rasters
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create vector contour from raster at specified steps
- 创建
+
Feature type (for polygons, choose Boundary)
要素类型（对于多边形，请选择边界）
-
- File
- 文件
-
File management
@@ -72591,7 +61636,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generates area statistics for rasters
-
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Imagery
位图影像
-
- Import
- 导入
-
Import ASCII raster
@@ -72955,7 +61996,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Resample raster using aggregation
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
@@ -73786,19 +62827,19 @@ Returns a string representation of a color based on its hue, saturation, value a
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
-
@@ -73855,10 +62896,6 @@ Returns a string representation of a color based on its hue, saturation, value a
No layer
无图层
-
- Add New Rule
- 添加新规则
-
Delete Rule
@@ -73902,26 +62939,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid first geometry.
第一个几何图形无效。
-
- First geometry invalid in line test.
- 线条测试中第一个几何图形无效。
-
-
- Failed to import first geometry into GEOS in line test.
- 线条测试中将第一个几何图形导入到GEOS时失败。
-
-
- Invalid second geometry in dangling line test.
- 悬浮线条测试中第二个几何图形无效。
-
-
- Failed to import second geometry into GEOS in dangling line test.
- 悬浮线条测试中将第二个几何图形导入到GEOS时失败。
-
-
- Skipping invalid second geometry of feature %1 in dangling line test.
- 悬浮线条测试时忽略要素%1中无效的第二个几何图形。
-
First geometry invalid in dangling line test.
@@ -73990,10 +63007,6 @@ Returns a string representation of a color based on its hue, saturation, value a
Second geometry missing or GEOS import failed.
缺少第二个几何图形或者导入GEOS失败。
-
- No second geometry missing or GEOS import failed.
- 没有第二个几何图形缺失或GEOS导入失败。
-
Missing geometry in multipart check.
@@ -74094,17 +63107,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- 窗体
+
Open number input dialog
-
...
- ...
+
@@ -74112,12 +63125,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- 窗体
+
...
- ...
+
-
+
\ No newline at end of file
diff --git a/i18n/qgis_zh_TW.ts b/i18n/qgis_zh_TW.ts
index b7d6632676d..7f879953b7c 100644
--- a/i18n/qgis_zh_TW.ts
+++ b/i18n/qgis_zh_TW.ts
@@ -1,6 +1,4 @@
-
-
-
+
APIsDialogPythonConsole
@@ -207,17 +205,17 @@
程式庫:
- <warning> geometry_columns table doesn't exist!
+ <warning> geometry_columns table doesn't exist!
This table is essential for many GIS applications for enumeration of tables.
-
create new schemas
-
create temporary tables
-
Not connected
@@ -233,381 +231,381 @@ This table is essential for many GIS applications for enumeration of tables.
<warning> %s support not enabled!
-
<warning> This user has no privileges!
-
User has privileges:
-
Privileges
-
Owner:
-
Comment:
-
create new objects
-
access objects
-
Schema details
-
<warning> This user has no privileges to access this schema!
-
Relation type:
-
View
- 檢視
+
Table
- 表格
+
Rows:
-
Unknown (<a href="action:rows/count">find out</a>)
-
Name
- 名稱
+
Type
-
Null
-
Default
- 預設
+
Column(s)
-
Function
-
<warning> This is not a spatial table.
-
Fields
- 欄位
+
Constraints
- 限制
+
Indexes
- 索引
+
Triggers
-
View definition
-
Column:
-
Geometry:
-
Dimension:
-
Undefined
- 未定義
+
Spatial ref:
-
Estimated extent:
-
(unknown) (<a href="action:extent/get">find out</a>)
-
Extent:
-
<warning> There isn't entry in geometry_columns!
-
<warning> No spatial index defined (<a href="action:spatialindex/create">create it</a>)
-
Pages:
-
Rows (estimation):
-
Privileges:
-
<warning> This user doesn't have usage privileges for this schema!
-
Rows (counted):
-
<warning> This user has read-only privileges.
-
<warning> There's a significant difference between estimated and real row count. Consider running <a href="action:vacuumanalyze/run">VACUUM ANALYZE</a>.
-
<warning> No primary key defined for this table!
-
Scripts:
-
- <warning> Version of installed scripts doesn't match version of released scripts!
+ <warning> Version of installed scripts doesn't match version of released scripts!
This is probably a result of incorrect PostGIS upgrade.
-
- <warning> This user doesn't have privileges to read contents of geometry_columns table!
+ <warning> This user doesn't have privileges to read contents of geometry_columns table!
This table is essential for many GIS applications for enumeration of tables.
-
Length
- 長度
+
Enabled
- 啟用
+
Yes
- 是
+
No
- 否
+
<a href="action:triggers/enable">Enable all triggers</a> / <a href="action:triggers/disable">Disable all triggers</a>
-
Definition
-
Rules
-
&Versioning
-
&Table
- 表格(&T)
+
"{0}" not found
-
Filename:
-
SQLite version:
-
Error:
%s
-
Query:
%s
-
&Re-connect
-
&Database
- 資料庫(D&)
+
&Create schema
-
&Schema
- 架構(&S)
+
&Delete (empty) schema
-
Delete selected item
- 刪除選取的項目
+
&Create table
-
&Edit table
-
&Delete table/view
-
&Empty table
-
&Move to schema
-
Cannot delete the selected item.
-
No database selected or you are not connected to it.
- 未選取資料庫或您未尚未連結資料庫。
+
New schema
-
Enter new schema name
-
Select an empty SCHEMA for deletion.
-
hey!
-
Really delete schema %s?
-
Select a TABLE for editation.
-
Select a TABLE/VIEW for deletion.
-
Really delete table/view %s?
-
Select a TABLE to empty it.
-
Really delete all items from table %s?
-
Select a TABLE/VIEW.
-
Do you want to %s all triggers?
-
Table triggers
-
Do you want to %s trigger %s?
-
Table trigger
-
Do you want to %s spatial index for field %s?
-
Spatial Index
- 空間索引
+
Check
-
Primary key
@@ -619,15 +617,15 @@ Query:
Unique
- 唯一值
+
Exclusion
-
Unknown
- 未知
+
@@ -2091,7 +2089,7 @@ This may cause unexpected results.
長度欄位
- Can't delete existing shapefile
+ Can't delete existing shapefile
%s
無法刪除現有的Shape檔
%s
@@ -2401,47 +2399,24 @@ Are you sure you want to proceed?
從目前的選取中移除
- Select by location
空間選取
- Select features in:
選取圖徵在:
- that intersect features in:
相交(intersect)圖徵在:
-
- Include input features that touch the selection features
-
-
- Include input features that overlap/cross the selection features
-
-
- Include input features completely within the selection features
-
-
- Only selected features
-
Modify current selection by:
- 修改目前選取由:
+ 修改目前選取由:
Use selected features only
- 只使用已選取的圖徵
+ 只使用已選取的圖徵
Please specify select layer
@@ -2811,12 +2786,12 @@ Are you sure you want to proceed?
<html><head/><body><p>Enter expression in the text field. Double click on elements in the tree to add their values to the expression.</p></body></html>
-
<html><head/><body><p><span style=" font-weight:600;">Warning</span>: if expression result is float value, but integer required, result will be rounded to integer.</p></body></html>
-
@@ -3174,7 +3149,7 @@ geometry column - column with unique integer values
Unable to load {0} plugin.
The required "{1}" module is missing.
Install it and try again.
-
QGIS version detected:
@@ -3288,35 +3263,35 @@ Plugin will not be enabled.
Near black
-
Convert nearly black/white borders to exact value
-
Fill nodata
-
Fill raster regions by interpolation from edges
-
Proximity (Raster distance)
-
Produces a raster proximity map
-
Grid (Interpolation)
-
Create raster from the scattered data
-
DEM (Terrain models)
@@ -3324,7 +3299,7 @@ Plugin will not be enabled.
Tool to analyze and visualize DEMs
-
Miscellaneous
@@ -3332,11 +3307,11 @@ Plugin will not be enabled.
Build Virtual Raster (Catalog)
-
Builds a VRT from a list of datasets
-
Merge
@@ -3344,31 +3319,31 @@ Plugin will not be enabled.
Build a quick mosaic from a set of images
-
Information
- 資訊
+
Lists information about raster dataset
-
Build overviews (Pyramids)
-
Builds or rebuilds overview images
-
Tile index
-
Build a shapefile as a raster tileindex
-
GdalTools settings
@@ -3401,7 +3376,7 @@ Plugin will not be enabled.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -3508,245 +3483,245 @@ Do you want terminate it anyway?
Extract projection
- 取出投影
+
Batch mode (for processing whole directory)
-
&Input file
- 輸入檔案(&I)
+
Recurse subdirectories
-
Create also prj file
-
Select the file for DEM
-
Select the raster file to save the results to
-
Select the color configuration file
-
Select the input file for Grid
-
Select the input file for Rasterize
-
Select the input file for Sieve
-
Select the input file for Warp
-
Select the mask file
-
Select the input directory with files to Warp
-
Select the output directory to save the results to
-
Output size or resolution required
-
The output file doesn't exist. You must set up the output size or resolution to create it.
-
Select the input file for Translate
-
Select the input directory with files to Translate
-
Translate - srcwin
-
Image coordinates (pixels) must be integer numbers.
-
Translate - prjwin
-
Image coordinates (geographic) must be numbers.
-
Select the input directory with raster files
-
Select where to save the TileIndex output
-
Convert paletted image to RGB
-
Select the input file for convert
-
Select the input directory with files for convert
-
Select the file to analyse
-
Select the input directory with files to Assign projection
-
Copy
- 複製
+
Copy all
-
Select the input file for Polygonize
-
Select the files for VRT
-
Select where to save the VRT
-
VRT (*.vrt)
-
Select the input directory with files for VRT
-
Select the input file for Near Black
-
Select the input file
-
Select the input directory with files
-
Select the files to Merge
-
Error retrieving the extent
-
GDAL was unable to retrieve the extent from any file.
The "Use intersected extent" option will be unchecked.
-
Empty extent
- 空範圍
+
The computed extent is empty.
Disable the "Use intersected extent" option to have a nonempty output.
-
Select where to save the Merge output
-
Select the input directory with files to Merge
-
{0} not created.
-
Select the files to analyse
-
Select the input file for Contour
-
Select where to save the Contour output
-
Select the input file for Proximity
-
Warning
- 警告
+
Warning: CRS information for all raster in subfolders will be rewritten. Are you sure?
-
Finished
- 已結束
+
Processing completed.
-
Assign projection
- 指定投影方式
+
This raster already found in map canvas
-
Select where to save the Polygonize output
-
@@ -3754,39 +3729,39 @@ Disable the "Use intersected extent" option to have a nonempty output.
Select the extent by drag on canvas
-
or change the extent coordinates
-
x
-
y
-
2
- 2
+
1
- 1
+
Re-Enable
-
@@ -3830,7 +3805,7 @@ Disable the "Use intersected extent" option to have a nonempty output.
Path to the GDAL executables
-
Path to the GDAL python modules
-
GDAL help path
-
GDAL data path
-
GDAL driver path
-
A list of colon-separated (Linux and MacOS) or
@@ -3868,29 +3843,29 @@ and python executables.
MacOS users usually need to set it to something like
/Library/Frameworks/GDAL.framework/Versions/1.8/Programs
-
A list of colon-separated (Linux and MacOS) or
semicolon-separated (Windows) paths to python modules.
-
Useful to open local GDAL documentation instead of online help
when pressing on the tool dialog's Help button.
-
Select directory with GDAL executables
-
Select directory with GDAL python modules
-
Select directory with the GDAL documentation
-
@@ -3898,24 +3873,24 @@ when pressing on the tool dialog's Help button.
Build Virtual Raster (Catalog)
-
Use visible raster layers for input
-
Choose input directory instead of files
-
&Input files
-
Recurse subdirectories
-
&Resolution
-
Highest
-
Lowest
-
&Source No Data
-
Se¶te
-
Allow projection difference
-
Clipper
- 裁剪
+
&No data value
-
Clipping mode
-
Extent
- 範圍
+
Mask layer
-
Create an output alpha band
-
Contour
- 等高線
+
&Output file for contour lines (vector)
-
I&nterval between contour lines
-
If not provided, no elevation attribute is attached.
-
ELEV
-
Convert RGB image to paletted
-
Batch mode (for processing whole directory)
-
Number of colors
-
Band to convert
-
DEM (Terrain models)
- DEM(地形模型)
+
&Band
-
Compute &edges
-
Use Zevenbergen&&Thorne formula (instead of the Horn's one)
-
&Mode
-
Hillshade
-
Slope
-
Aspect
-
Color relief
-
TRI (Terrain Ruggedness Index)
-
TPI (Topographic Position Index)
-
Roughness
-
Mode Options
-
Z factor (vertical exaggeration)
-
Scale (ratio of vert. units to horiz.)
-
Azimuth of the light
-
Altitude of the light
-
Slope expressed as percent (instead of as degrees)
-
Return trigonometric angle (instead of azimuth)
-
Return 0 for flat (instead of -9999)
-
Color configuration file
-
Matching mode
-
Exact color (otherwise "0,0,0,0" RGBA)
-
Nearest color
-
Add alpha channel
-
&Creation Options
-
Fill Nodata
-
&Input Layer
-
Output format
- 輸出格式
+
Search distance
-
Smooth iterations
-
Band to operate on
-
Validity mask
-
Do not use the default validity mask
-
Grid (Interpolation)
-
&Z Field
-
&Algorithm
-
Inverse distance to a power
-
Moving average
-
Nearest neighbor
-
Data metrics
-
Power
-
Smoothing
-
Radius1
-
Radius2
-
Max points
-
Min points
-
Angle
- 角度
+
No data
-
Metrics
-
Minimum
- 最小值
+
Maximum
- 最大值
+
Range
- 範圍
+
Resize
-
Width
- 寬度
+
Height
- 高度
+
Raster info
-
Use intersected extent
-
Grab pseudocolor table from the first image
-
Near Black
-
How &far from black (or white)
-
Search for nearly &white (255) pixels instead of black ones
-
Build overviews (Pyramids)
-
Remove all overviews.
-
Clean
-
Polygonize (Raster to vector)
- 轉化成多邊形(影像轉向量)
+
&Output file for polygons (shapefile)
-
&Field name
-
DN
-
Use mask
-
Desired SRS
-
Select...
- 選擇...
+
Proximity (Raster distance)
-
&Values
-
&Dist units
-
GEO
-
PIXEL
-
&Max dist
-
&No data
-
&Fixed buf val
-
0
- 0
+
Rasterize (Vector to raster)
- 影像化(向量轉影像)
+
&Output file for rasterized vectors (raster)
-
Keep existing raster size and resolution
-
Raster size in pixels
-
Raster resolution in map units per pixel
-
Horizontal
- 水平
+
Vertical
- 垂直
+
Sieve
- 篩濾(Sieve)
+
&Threshold
-
&Pixel connections
-
4
- 4
+
8
- 8
+
Raster tile index
-
Output shapefile
- 輸出shape檔
+
Tile index field
-
location
-
Write absolute path
-
Skip files with different projection ref
-
Translate (Convert format)
- 轉換(轉換格式)
+
Percentage to resize image. This will change pixel size/image resolution accordingly: 25% will create an image with pixels 4x larger.
-
Outsize
-
%
- %
+
Assign a specified nodata value to output bands.
-
To expose a dataset with 1 band with a color table as a dataset with 3 (RGB) or 4 (RGBA) bands.
-Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
+Useful for output drivers such as JPEG, JPEG2000, MrSID, ECW that don't support color indexed datasets.
The 'gray' value (from GDAL 1.7.0) enables to expand a dataset with a color table that only contains gray levels to a gray indexed dataset.
-
Expand
-
Gray
- 灰階
+
RGB
-
RGBA
-
Selects a subwindow from the source image for copying based on pixel/line location. (Enter Xoff Yoff Xsize Ysize)
-
Srcwin
-
Selects a subwindow from the source image for copying (like -srcwin) but with the corners given in georeferenced coordinates. (Enter ulx uly lrx lry)
-
Prjwin
-
Copy all subdatasets of this file to individual output files. Use with formats like HDF or OGDI that have subdatasets.
-
Sds
-
Warp (Reproject)
- 彎曲(重新投影)
+
&Resampling method
-
Near
-
Bilinear
- 雙線性
+
Cubic
- 立方卷積
+
Cubic spline
-
Lanczos
-
&Memory used for caching
-
Use m&ultithreaded warping implementation
-
&Output directory for contour lines (shapefile)
-
@@ -5212,43 +5187,43 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Heatmap
- Heatmap
+
Creates a heatmap raster for the input point vector.
-
&Heatmap
-
GDAL driver error
-
Cannot open the driver for the specified format
-
Raster update error
-
Could not open the created raster for updating. The heatmap was not generated.
-
Creating heatmap
-
Heatmap generation aborted
-
QGIS will now load the partially-computed raster.
-
@@ -5319,17 +5294,17 @@ GEOS geoprocessing error: One or more input features have invalid geometry.
Input point layer
- 輸入點圖層
+
Output raster
-
Output format
- 輸出格式
+
Rows
-
Cell size X
-
Columns
-
Cell size Y
-
Use radius from field
-
Use weight from field
-
0.0
- 0.0
+
Decay ratio
-
Quartic (biweight)
-
Triangular
-
Uniform
-
Triweight
-
Epanechnikov
-
Kernel shape
-
Add generated file to map
-
MainWindow
- &Edit
編輯(&E)
@@ -5530,157 +5505,157 @@ GEOS geoprocessing error: One or more input features have invalid geometry.選取
- Measure
測量
- &Decorations
地圖裝飾(&D)
- &Layer
圖層(&L)
- New
新增
- &Plugins
附加元件(&P)
- &Help
說明(&H)
- &Settings
設定(&S)
- &Raster
影像(&R)
- Vect&or
向量(&o)
- &OpenStreetMap
&OpenStreetMap
- File
檔案
- Manage Layers
管理圖層
- Digitizing
數位化
- Advanced Digitizing
進階數位化
- Map Navigation
地圖瀏覽
- Attributes
屬性
- Plugins
附加元件
- Help
說明
- Raster
影像
- Label
標記
- Vector
向量
- Database
資料庫
- Web
網頁
- Ctrl+N
Ctrl+N
- Ctrl+O
Ctrl+O
- Ctrl+S
Ctrl+S
- Ctrl+Shift+S
Ctrl+Shift+R
- Save as Image...
另存為影像...
- &New Print Composer
地圖出版設計(&N)
- Ctrl+P
Ctrl+P
- Composer Manager...
設計管理...
@@ -5700,948 +5675,940 @@ GEOS geoprocessing error: One or more input features have invalid geometry.使用範本新增
- Preview Mode
預覽模式
- Paste Features as
貼上圖徵為
- &New
新增(&N)
- &Open...
開啟(&O)...
- &Save
儲存(&S)
- Save &As...
另存新檔(&A)...
- Exit QGIS
退出QGIS
- Ctrl+Q
Ctrl+Q
- &Undo
復原(&U)
- Ctrl+Z
Ctrl+Z
- &Redo
取消回復(&R)
- Ctrl+Shift+Z
Ctrl+Shift+Z
- Cut Features
剪下圖徵
- Ctrl+X
Ctrl+X
- Copy Features
複製圖徵
- Ctrl+C
Ctrl+C
- Paste Features
貼上圖徵
- Ctrl+V
Ctrl+V
- Add Feature
加入圖徵
- Ctrl+.
Ctrl+.
- Move Feature(s)
移動圖徵
- Reshape Features
重塑圖徵
- Split Features
分割圖徵
- Split Parts
分割部件
- Delete Selected
刪除選取的記錄
- Add Ring
加入環形(Ring)
- Add Part
加入部件(Part)
- Simplify Feature
簡化圖徵
- Delete Ring
刪除環形(Ring)
- Delete Part
刪除部件(Part)
- Merge Selected Features
合併選取圖徵
- Merge Attributes of Selected Features
合併選取屬性的圖徵
- Node Tool
節點工具
- Rotate Point Symbols
旋轉點符號
- Snapping Options...
自動接合選項...
- Pan Map
平移地圖
- Zoom In
放大
- Ctrl++
Ctrl++
- Zoom Out
縮小
- Ctrl+-
Ctrl+-
+ Select Single Feature
- 選取單一圖徵
+ 選取單一圖徵
+ Select Features by Rectangle
- 由矩形選取圖徵
+ 由矩形選取圖徵
- Select Features by Polygon
由多邊形選取圖徵
- Select Features by Freehand
由手繪選取圖徵
- Select Features by Radius
由弧形選取圖徵
- Deselect Features from All Layers
取消所有圖層的圖徵選取
- Identify Features
識別圖徵
- Ctrl+Shift+I
Ctrl+Shift+I
- Measure Line
測量長度
- Ctrl+Shift+M
Ctrl+Shift+M
- Measure Area
測量面積
- Ctrl+Shift+J
Ctrl+Shift+J
- Measure Angle
測量角度
- Zoom Full
全圖顯示
- Ctrl+Shift+F
Ctrl+Shift+F
- Zoom to Layer
縮放到圖層範圍
- Zoom to Selection
縮放至選取的大小
- Ctrl+J
Ctrl+J
- Zoom Last
縮放至上一檢視
- Zoom Next
縮放至下一檢視
- Zoom Actual Size
實際大小縮放
- Zoom to Native Pixel Resolution
縮放至原始像素解析度
- Map Tips
地圖提示工具
- Show information about a feature when the mouse is hovered over it
當滑鼠移動至圖徵上時顯示其資訊
- New Bookmark...
新的書籤...
- Ctrl+B
Ctrl+B
- Show Bookmarks
顯示書籤
- Ctrl+Shift+B
Ctrl+Shift+B
- Refresh
重新整理
- Text Annotation
文字註記
- Form Annotation
表單註記
- Move Annotation
移動註記
- Labeling
標記
- Layer Labeling Options
圖層標記選項
- New Shapefile Layer...
新增Shape檔圖層...
- Ctrl+Shift+N
Ctrl+Shift+N
- New SpatiaLite Layer ...
新增SpatiaLite圖層...
- Ctrl+Shift+A
Ctrl+Shift+A
- Raster calculator ...
影像運算...
- Add Vector Layer...
加入向量圖層...
- Ctrl+Shift+V
Ctrl+Shift+V
- Add Raster Layer...
加入影像圖層...
- Ctrl+Shift+R
Ctrl+Shift+R
- Add PostGIS Layers...
加入PostGIS圖層...
- Ctrl+Shift+D
Ctrl+Shift+D
- Add SpatiaLite Layer...
加入SpatiaLite圖層...
- Ctrl+Shift+L
Ctrl+Shift+L
- Add MSSQL Spatial Layer...
加入MSSQL空間圖層...
- Add Oracle Spatial Layer...
加入Oracle空間圖層...
- Ctrl+Shift+O
Ctrl+Shift+O
- Add WMS/WMTS Layer...
加入 WMS/WMTS 圖層...
- Ctrl+Shift+W
Ctrl+Shift+W
- Open Attribute Table
開啟屬性工作表
- Toggle Editing
切換編輯狀態
- Toggles the editing state of the current layer
切換目前圖層的編輯狀態
- Save for Selected Layer(s)
儲存已選取的圖層
- Save edits to current layer, but continue editing
儲存編輯結果至目前圖層，且繼續編輯
- Save As...
儲存為...
- Add from Layer Definition File...
由圖層定義檔案新增…
- Save As Layer Definition File...
儲存為圖層定義檔案…
- Normal
正常
- Normal preview mode
正常預覽模式
- Simulate Photocopy (Grayscale)
模擬複印(灰階)
- Simulate photocopy (grayscale)
模擬複印(灰階)
- Simulate Fax (Mono)
模擬Fax(單一)
- Simulate fax (mono)
模擬Fax(單一)
- Simulate Color Blindness (Protanope)
模擬色盲(紅色盲)
- Simulate color blindness (protanope)
模擬色盲(紅色盲)
- Simulate Color Blindness (Deuteranope)
模擬色盲(綠色盲)
- Simulate color blindness (deuteranope)
模擬色盲(綠色盲)
- Set Scale Visibility of Layer(s)
設定圖層的可見比例
- Remove Layer(s)
移除圖層
- Ctrl+D
Ctrl+D
- Set CRS of Layer(s)
設定圖層的CRS
- Ctrl+Shift+C
Ctrl+Shift+C
- Set Project CRS from Layer
由圖層設定專案CRS
- Properties...
屬性...
- Query...
查詢...
- Add to Overview
加入到全覽圖
- Add All to Overview
全部圖層加入全覽圖
- Remove All from Overview
移除全覽圖內所有的圖層
- Show All Layers
顯示所有圖層
- Ctrl+Shift+U
Ctrl+Shift+U
- Hide All Layers
隱藏所有圖層
- Ctrl+Shift+H
Ctrl+Shift+H
- Manage and Install Plugins...
管理與安裝附加元件...
- Open Field Calculator
開啟欄位計算
- Add Delimited Text Layer...
加入分隔文字圖層...
- Add Delimited Text Layer
加入分隔文字圖層
- New Vector Layer
新增向量圖層
- Paste features in clipboard into a new OGR vector layer.
貼上剪貼簿中的圖徵為新的OGR向量圖層。
- New Memory Vector Layer
新增記憶體向量圖層
- Paste features in clipboard into a new memory vector layer.
貼上剪貼簿中的圖徵為新的記憶體向量圖層。
- Toggle Full Screen Mode
切換全螢幕模式
- Select Feature(s)
-
-
- Select Features by area or single click
-
-
- F5
F5
- Ctrl+F
Ctrl+F
- F11
F11
- Project Properties...
專案屬性...
- Ctrl+Shift+P
Ctrl+Shift+P
- Options...
選項...
- Custom CRS...
自訂坐標參考系統(CRS)...
- Configure shortcuts...
設定快速鍵...
- Local Histogram Stretch
延伸局部分佈圖(histogram)
- Stretch histogram of active raster to view extents
延伸目前檢視範圍的影像分佈圖(histogram)
- Help Contents
說明內容
- F1
F1
- API documentation
API文件
- QGIS Home Page
QGIS首頁
- Ctrl+H
Ctrl+H
- Check QGIS Version
檢查QGIS版本
- Check if your QGIS version is up to date (requires internet access)
檢查是否有新版本的QGIS (需要網路存取)
- About
關於
- QGIS Sponsors
QGIS贊助者
- Move Label
移動標記
- Rotate Label
旋轉標記
- Rotate Label
Ctl (Cmd) increments by 15 deg.
旋轉標記
Ctl (Cmd)每次增加 15 度。
- Change Label
改變標記
- Style Manager...
樣式管理...
- Python Console
Python主控台
- Full histogram stretch
延伸全幅分佈圖(histogram)
- Stretch Histogram to Full Dataset
延伸分佈圖(histogram)至整個資料集
- Customization...
自定功能區...
- This is here just to avoid shortcut conflicts, the shortcut is caught in QgsCustomization
為了避免捷徑衝突，這捷徑已在QgsCustomization攔截
- Ctrl+M
Ctrl+M
- Embed Layers and Groups...
嵌入圖層與群組...
- Embed layers and groups from other project files
由其它專案檔案嵌入圖層與群組
- &Copyright Label
版權標籤(&C)
- Creates a copyright label that is displayed on the map canvas.
在地圖檢視上建立版權標籤。
- &North Arrow
指北針(&N)
- "Creates a north arrow that is displayed on the map canvas"
“在地圖畫面中建立指北針”
- &Scale Bar
比例尺(&S)
- Creates a scale bar that is displayed on the map canvas
在地圖檢視中建立比例尺
- Add WFS Layer...
加入WFS圖層...
- Add WFS Layer
加入WFS圖層
- Feature Action
圖徵動作
- Run Feature Action
執行圖徵動作
- Pan Map to Selection
移動地圖至選取
- Touch zoom and pan
觸摸縮放與移動
- Offset Curve
偏移曲線
- Copy style
複製樣式
- Paste style
貼上樣式
- Add WCS Layer...
加入WCS圖層...
- &Grid
格線(&G)
- Grid
格線
- Pin/Unpin Labels
釘住／解除釘住標記
- Pin/Unpin Labels
Click or marquee on label to pin
Shift unpins, Ctl (Cmd) toggles state
@@ -6652,44 +6619,44 @@ Shift 解除釘住, Ctl (Cmd) 切換狀態
作用在所有可編輯的圖層
- Highlight Pinned Labels
突顯釘住的標記
- New Blank Project
新增空白專案
- Local Cumulative Cut Stretch
局部累計裁剪延伸
- Local cumulative cut stretch using current extent, default limits and estimated values.
使用目前的範圍作局部累計裁剪延伸，預設使用限制與估計值。
- Full Dataset Cumulative Cut Stretch
整個資料集累計裁剪延伸
- Cumulative cut stretch using full dataset extent, default limits and estimated values.
使用整個資料集作累積裁剪延伸，預設使用限制與估計值。
- Show/Hide Labels
顯示/隱藏標記
- Show/Hide Labels
Click or marquee on feature to show label
Shift+click or marquee on label to hide it
@@ -6700,128 +6667,128 @@ Shift+點擊或框選標記以隱藏標記
動作僅對目前編輯的圖層有效
- Html Annotation
HTML註記
- Duplicate Layer(s)
複製圖層
- SVG annotation
SVG註記
- Save for All Layers
儲存所有圖層
- Rollback for All Layers
回復所有圖層
- Cancel for All Layers
取消所有圖層
- Rollback for Selected Layer(s)
回復選取圖層
- Current Edits
目前的編輯
- Cancel for Selected Layer(s)
取消選取圖層
- Save Layer Edits
儲存圖層編輯
- Rotate Feature(s)
旋轉圖徵
- &Download data
下載資料(&D)
- &Import topology from XML
由XML匯入拓撲(&I)
- &Export topology to SpatiaLite
匯出拓撲至SpatiaLite(&E)
- Increase brightness
增加亮度
- Decrease brightness
減少亮度
- Increase contrast
增強對比
- Decrease contrast
减弱對比
- Select By Expression
表示式選取
- Select features using an expression
使用表示式選取圖徵
- Need commercial support?
需要商業支援嗎？
- DXF Export...
Dxf 匯出...
- Fill Ring
填滿環形
@@ -7267,11 +7234,6 @@ Shift+點擊或框選標記以隱藏標記
Can't save model
無法儲存模型
-
- The selected model could not be loaded.
-See the log for more information.
-
Model doesn't contains any algorithms and/or parameters and can't be executed
模型無法包含任何演算法與/或參數，無法執行
@@ -7299,7 +7261,7 @@ See the log for more information.
The selected model could not be loaded.
Wrong line: %s
- 選取的模型無法載入。
+ 選取的模型無法載入。
錯誤列:%s
@@ -7618,43 +7580,43 @@ Wrong line: %s
An error has occured while executing Python code:
-
Python version:
-
QGIS version:
-
Python path:
-
Python error
-
Couldn't load plugin '%s' from ['%s']
-
Couldn't load plugin %s
-
%s due an error when calling its classFactory() method
-
%s due an error when calling its initGui() method
-
Error while unloading plugin %s
-
@@ -7665,357 +7627,357 @@ Wrong line: %s
Clear console
-
Compile APIs
-
Saving prepared file...
-
Saved
-
Done
- 完成
+
Error preparing file...
-
Hide Editor
-
Check Syntax
-
Run selected
-
Run Script
-
Undo
- 復原
+
Redo
- 取消復原
+
Find Text
-
Cut
- 剪下
+
Copy
- 複製
+
Paste
- 貼上
+
Comment
- 註解
+
Uncomment
-
Share on codepad
-
Hide/Show Object Inspector
-
Select All
- 全選
+
Settings
- 設定
+
<b>"{0}"</b> was not found.
-
URL copied to clipboard.
-
Connection error:
-
[Temporary file saved in {0}]
-
## Script error: {0}
-
## Script executed successfully: {0}
-
Cannot execute file {0}. Error: {1}
-
Hey, type something to run!
-
You have to save the file before running it.
-
Python Console: Save file
-
Script was correctly saved.
-
Click on button to restore all tabs from last session.
-
Restore tabs
-
Close
- 關閉
+
List all tabs
-
New Editor
-
Close Tab
-
Close All
-
Close Others
-
Save As
-
The file {0} could not be opened. Error: {1}
-
Untitled-{0}
-
Python Console: Save File
-
The file <b>'{0}'</b> has been modified, save changes?
-
Unable to restore the file:
{0}
-
Python {0} on {1}
## Type help(iface) for more info and list of methods.
-
Hide/Show Toolbar
-
Show Editor
-
Enter Selected
-
Object Inspector
-
Open file
- 開啟檔案
+
Save
- 儲存
+
Save As...
-
Run script
-
Show editor
-
Import Class
-
Import Processing class
-
Enter text to find...
-
Find Next
-
Find Previous
-
Case Sensitive
-
Whole Word
-
Wrap Around
-
Open File
- 開啟檔案
+
Save Error
-
The file <b>{0}</b> could not be saved. Error: {1}
-
Save File As
-
History saved successfully.
-
Session and file history cleared successfully.
-
History cleared successfully.
-
Command History
-
Show
-
Clear File
-
Clear Session
-
Python Console - Command History
-
Double click on item to execute
-
Add API path
-
Remove API path
-
The file <b>"{0}"</b> has been deleted or is not accessible
-
The file <b>"{0}"</b> has been changed and reloaded
-
The file <b>"{0}"</b> is read only, please save to different file first.
-
Import PyQt.QtCore class
-
Import PyQt.QtGui class
-
Run command
-
Help
- 說明
+
@@ -8055,27 +8017,27 @@ Wrong line: %s
Unable to initialize
QOCISpatialDriver
-
Unable to logon
-
Unable to begin transaction
-
Unable to commit transaction
-
Unable to rollback transaction
-
@@ -8085,42 +8047,42 @@ Wrong line: %s
Unable to bind column for batch execute
-
Unable to execute batch statement
-
Unable to goto next
-
Unable to alloc statement
-
Unable to prepare statement
-
Unable to get statement type
-
Unable to bind value
-
Unable to execute statement
-
@@ -8147,22 +8109,22 @@ Wrong line: %s
估算標準差...
- minidump written to %1
minidump寫入至%1
- writing of minidump to %1 failed (%2)
寫入minidump至%1失敗 (%2)
- creation of minidump to %1 failed (%2)
建立minidump至%1失敗 (%2)
- Crash dumped
系統崩潰傾印
@@ -8316,6 +8278,7 @@ Error(%2): %3
Generated CRS
A CRS automatically generated from layer info get this prefix for description
生成CRS
@@ -8387,7 +8350,7 @@ Error(%2): %3
cm
-
無法轉換'%1'至區間 (Interval)
- Cannot convert '%1' to boolean
無法轉換'%1'至布林值 (boolean)
- Domain max must be greater than domain min
領域範圍最大值必大於最小值
- Exponent must be greater than 0
指數必須大於0
- Invalid regular expression '%1': %2
無效的正規表示式 '%1': %2
- Index is out of range
索引超出範圍
- Cannot convert '%1:%2:%3' to color
無法轉換 '%1': %2:%3' 為色彩值
- Cannot convert '%1:%2:%3:%4' to color
無法轉換 '%1': %2:%3 %4' 為色彩值
- "%1" is not a valid color ramp
"%1"不是有效的色彩映表
- Cannot convert '%1:%2:%3:%4:%5' to color
無法轉換'%1:%2:%3:%4:%5' 為色彩值
- function help for %1 missing
%1的功能說明遺失
- Operators
運算符號
- Fields and Values
欄位與值
- Math
數學
- Conversions
轉換
- Conditionals
條件
@@ -8605,58 +8568,58 @@ Error(%2): %3
年|年
- Date and Time
日期與時間
- String
字串
- Color
色彩
- Geometry
幾何圖形
- Record
記錄
- No root node! Parsing failed?
無根節點!解析失敗?
- (no root)
(無根節點)
- Unary minus only for numeric values.
僅適用於數值的一元減號。
- Can't preform /, *, or % on DateTime and Interval
日期時間與區間無法處理 /、 * 或 %
- [unsupported type;%1; value:%2]
[不支援的類別:%1;值:%2]
- Column '%1' not found
未找到列'%1'
@@ -8744,9 +8707,7 @@ Error(%2): %3
line %1 contains %n duplicate node(s) at %2
number of duplicate nodes
-
- 線條%1在%2處包含%n個重複節點
-
+ 線條%1在%2處包含%n個重複節點
By default, BNA files are created in multi-line format. For each record, the first line contains the identifiers and the type/number of coordinates to follow. Each following line contains a pair of coordinates.
-
New BNA files are created by the systems default line termination conventions. This may be overridden here.
-
BNA records may contain from 2 to 4 identifiers per record. Some software packages only support a precise number of identifiers. You can override the default value (2) by a precise value
-
The BNA writer will try to recognize ellipses and circles when writing a polygon. This will only work if the feature has previously been read from a BNA file. As some software packages do not support ellipses/circles in BNA data file, it may be useful to tell the writer by specifying ELLIPSES_AS_ELLIPSES=NO not to export them as such, but keep them as polygons.
-
Limit the number of coordinate pairs per line in multiline format.
-
Set the number of decimal for coordinates. Default value is 10.
-
By default, the geometry of a feature written to a .csv file is discarded. It is possible to export the geometry in its WKT representation by specifying GEOMETRY=AS_WKT. It is also possible to export point geometries into their X,Y,Z components by specifying GEOMETRY=AS_XYZ, GEOMETRY=AS_XY or GEOMETRY=AS_YX.
-
Create the associated .csvt file to describe the type of each column of the layer and its optional width and precision.
-
Write a UTF-8 Byte Order Mark (BOM) at the start of the file.
-
Override the type of shapefile created. Can be one of NULL for a simple .dbf file with no .shp file, POINT, ARC, POLYGON or MULTIPOINT for 2D, or POINTZ, ARCZ, POLYGONZ or MULTIPOINTZ for 3D. Shapefiles with measure values are not supported, nor are MULTIPATCH files.
-
set the encoding value in the DBF file. The default value is LDID/87. It is not clear what other values may be appropriate.
-
Set to YES to resize fields to their optimal size.
-
Set to YES to write a bbox property with the bounding box of the geometries at the feature and feature collection level.
-
Maximum number of figures after decimal separator to write in coordinates. Default to 15. Truncation will occur to remove trailing zeros.
-
whether the document must be in RSS 2.0 or Atom 1.0 format. Default value : RSS
-
The encoding of location information. Default value : SIMPLE. W3C_GEO only supports point geometries. SIMPLE or W3C_GEO only support geometries in geographic WGS84 coordinates.
-
If defined to YES, extension fields will be written. If the field name not found in the base schema matches the foo_bar pattern, foo will be considered as the namespace of the element, and a <foo:bar> element will be written. Otherwise, elements will be written in the <ogr:> namespace.
-
If defined to NO, only <entry> or <item> elements will be written. The user will have to provide the appropriate header and footer of the document.
-
XML content that will be put between the <channel> element and the first <item> element for a RSS document, or between the xml tag and the first <entry> element for an Atom document.
-
Value put inside the <title> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <description> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <link> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <updated> element in the header. Should be formatted as a XML datetime. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <author><name> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
Value put inside the <id> element in the header. If not provided, a dummy value will be used as that element is compulsory.
-
If provided, this URI will be inserted as the schema location. Note that the schema file isn't actually accessed by OGR, so it is up to the user to ensure it will match the schema of the OGR produced GML data file.
-
This writes a GML application schema file to a corresponding .xsd file (with the same basename). If INTERNAL is used the schema is written within the GML file, but this is experimental and almost certainly not valid XML. OFF disables schema generation (and is implicit if XSISCHEMAURI is used).
-
This is the prefix for the application target namespace.
-
Can be set to TRUE to avoid writing the prefix of the application target namespace in the GML file.
-
Defaults to 'http://ogr.maptools.org/'. This is the application target namespace.
-
If not specified, GML2 will be used.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If YES, SRS with EPSG authority will be written with the 'urn:ogc:def:crs:EPSG::' prefix. In the case, if the SRS is a geographic SRS without explicit AXIS order, but that the same SRS authority code imported with ImportFromEPSGA() should be treated as lat/long, then the function will take care of coordinate order swapping. If set to NO, SRS with EPSG authority will be written with the 'EPSG:' prefix, even if they are in lat/long order.
-
only valid when FORMAT=GML3/GML3Degree/GML3.2) Default to YES. If set to NO, the <gml:boundedBy> element will not be written for each feature.
-
Default to YES. If YES, the output will be indented with spaces for more readability, but at the expense of file size.
-
By default when writing a layer whose features are of type wkbLineString, the GPX driver chooses to write them as routes. If FORCE_GPX_TRACK=YES is specified, they will be written as tracks.
-
By default when writing a layer whose features are of type wkbMultiLineString, the GPX driver chooses to write them as tracks. If FORCE_GPX_ROUTE=YES is specified, they will be written as routes, provided that the multilines are composed of only one single line.
-
If GPX_USE_EXTENSIONS=YES is specified, extra fields will be written inside the <extensions> tag.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS_URL is set. The namespace value used for extension tags. By default, 'ogr'.
-
Only used if GPX_USE_EXTENSIONS=YES and GPX_EXTENSIONS_NS is set. The namespace URI. By default, 'http://osgeo.org/gdal'.
-
By default files are created with the line termination conventions of the local platform (CR/LF on win32 or LF on all other systems). This may be overridden through use of the LINEFORMAT layer creation option which may have a value of CRLF (DOS format) or LF (Unix format).
-
INTERLIS 1
-
INTERLIS 2
-
Allows you to specify the field to use for the KML <name> element.
-
Allows you to specify the field to use for the KML <description> element.
-
Allows you to specify the AltitudeMode to use for KML geometries. This will only affect 3D geometries and must be one of the valid KML options.
-
Use this to turn on 'quick spatial index mode'. In this mode writing files can be about 5 times faster, but spatial queries can be up to 30 times slower.
-
Mapinfo TAB
-
Mapinfo MIF
-
Determine whether 2D (seed_2d.dgn) or 3D (seed_3d.dgn) seed file should be used. This option is ignored if the SEED option is provided.
-
Override the seed file to use.
-
Indicate whether the whole seed file should be copied. If not, only the first three elements will be copied.
-
Indicates whether the color table should be copied from the seed file.
-
Override the master unit name from the seed file with the provided one or two character unit name.
-
Override the sub unit name from the seed file with the provided one or two character unit name.
-
Override the number of subunits per master unit. By default the seed file value is used.
-
Override the number of UORs (Units of Resolution) per sub unit. By default the seed file value is used.
-
ORIGIN=x,y,z: Override the origin of the design plane. By default the origin from the seed file is used.
-
Microstation DGN
-
Should update files be incorporated into the base data on the fly.
-
Should a DEPTH attribute be added on SOUNDG features and assign the depth of the sounding. This should only be enabled with SPLIT_MULTIPOINT is also enabled.
-
Should all the low level geometry primitives be returned as special IsolatedNode, ConnectedNode, Edge and Face layers.
-
If enabled, numeric attributes assigned an empty string as a value will be preserved as a special numeric value. This option should not generally be needed, but may be useful when translated S-57 to S-57 losslessly.
-
Should LNAM and LNAM_REFS fields be attached to features capturing the feature to feature relationships in the FFPT group of the S-57 file.
-
Should additional attributes relating features to their underlying geometric primitives be attached. These are the values of the FSPT group, and are primarily needed when doing S-57 to S-57 translations.
-
Should attribute values be recoded to UTF-8 from the character encoding specified in the S57 DSSI record.
-
S-57 Base file
-
Can be used to avoid creating the geometry_columns and spatial_ref_sys tables in a new database. By default these metadata tables are created when a new database is created.
-
Controls the format used for the geometry column. Defaults to WKB.This is generally more space and processing efficient, but harder to inspect or use in simple applications than WKT (Well Known Text).
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be convered to lower case and some special characters(' - #) will be changed to underscores.
-
column_name1[,column_name2, ...] A list of (String) columns that must be compressed with ZLib DEFLATE algorithm. This might be beneficial for databases that have big string blobs. However, use with care, since the value of such columns will be seen as compressed binary content with other SQLite utilities (or previous OGR versions). With OGR, when inserting, modifying or queryings compressed columns, compression/decompression is done transparently. However, such columns cannot be (easily) queried with an attribute filter or WHERE clause. Note: in table definition, such columns have the 'VARCHAR_deflate' declaration type.
-
By default when creating new .csv files they are created with the line termination conventions of the local platform (CR/LF on Win32 or LF on all other systems). This may be overridden through the use of the LINEFORMAT option.
-
Field separator character.
-
Should multipoint soundings be split into many single point sounding features. Multipoint geometries are not well handled by many formats, so it can be convenient to split single sounding features with many points into many single point features.
-
Controls whether layer and field names will be laundered for easier use in SQLite. Laundered names will be converted to lower case and some special characters(' - #) will be changed to underscores.
-
SQLite
-
Insert the content of the EPSG CSV files into the spatial_ref_sys table. Set to NO for regular SQLite databases.
-
If the database is of the SpatiaLite flavour, and if OGR is linked against libspatialite, this option can be used to control if a spatial index must be created.
-
If the format of the geometry BLOB is of the SpatiaLite flavour, this option can be used to control if the compressed format for geometries (LINESTRINGs, POLYGONs) must be used
-
Used to force the SRID number of the SRS associated with the layer. When this option isn't specified and that a SRS is associated with the layer, a search is made in the spatial_ref_sys to find a match for the SRS, and, if there is no match, a new entry is inserted for the SRS in the spatial_ref_sys table. When the SRID option is specified, this search (and the eventual insertion of a new entry) will not be done: the specified SRID is used as such.
-
SpatiaLite
- SpatiaLite
+
AutoCAD DXF
-
Indicates the GeoConcept export file extension. TXT was used by earlier releases of GeoConcept. GXT is currently used.
-
Geoconcept
-
When this option is set, the new layer will be created inside the named FeatureDataset folder. If the folder does not already exist, it will be created.
-
Set name of geometry column in new layer. Defaults to 'SHAPE'.
-
Name of the OID column to create. Defaults to 'OBJECTID'.
-
ESRI FileGDB
-
Cannot overwrite a OGR layer in place
-
Failed to transform, writing stopped. (Exception: %1)
-
Unable to load %1 provider
-
Provider %1 has no %2 method
-
Loaded from Provider
- 從提供者載入
+
Creation error for features from #%1 to #%2. Provider errors was:
%3
-
Import was canceled at %1 of %2
-
Only %1 of %2 features written.
-
Reading raster part %1 of %2
-
Building pyramids failed - write access denied
-
Write access denied. Adjust the file permissions and try again.
- 拒絕寫入存取。請調整檔案權限後再試。
+
Building pyramids failed.
- 建立影像金字塔失敗。
+
The file was not writable. Some formats do not support pyramid overviews. Consult the GDAL documentation if in doubt.
- 此檔案無法寫入。某些格式不支援影像金字塔全覽圖。若有疑問可以查閱GDAL文件。
+
Building pyramid overviews is not supported on this type of raster.
- 此影像類型不支援建立影像金字塔全覽圖。
+
Building internal pyramid overviews is not supported on raster layers with JPEG compression and your current libtiff library.
- JPEG壓縮影像圖層與您目前的libtiff程式庫不支援建立內部影像金字塔全覽圖。
+
Version 0.1
@@ -9868,6 +9830,7 @@ Only %1 of %2 features written.
Layers
圖層
@@ -10445,12 +10408,14 @@ Only %1 of %2 features written.
Shapefile 匯入 PostgreSQL/PostGIS工具
+ SQL Anywhere plugin
- SQL Anywhere附加元件
+ SQL Anywhere附加元件
+ Store vector layers within a SQL Anywhere database
- 在SQL Anywhere資料庫中儲存向量圖層
+ 在SQL Anywhere資料庫中儲存向量圖層
A plugin to calculate count, sum, mean of rasters for each polygon of a vector layer
-
Cannot open GDAL MEM dataset %1: %2
-
Cannot GDALCreateGenImgProjTransformer:
-
Cannot inittialize GDALWarpOperation :
-
Cannot ChunkAndWarpImage: %1
-
GDAL/OGR VSIFileHandler
-
This raster file has no bands and is invalid as a raster layer.
-
Cannot get GDAL raster band: %1
-
Couldn't open the data source: %1
-
Parse error at line %1 : %2
-
GPS eXchange format provider
-
QGIS couldn't find your GRASS installation.
+ QGIS couldn't find your GRASS installation.
Would you like to specify path (GISBASE) to your GRASS installation?
-
Choose GRASS installation path (GISBASE)
-
GRASS data won't be available if GISBASE is not specified.
-
Fatal error occurred in GRASS library. QGIS gets over the error but any next fatal error will cause QGIS exit without warning. This is a problem of GRASS 7.0.0beta1 and hopefully will be fixed in higher GRASS versions. Error message: %1
-
GISBASE is not set.
-
%1 is not a GRASS mapset.
-
Cannot start %1/etc/lock
-
Mapset is already in use.
-
Temporary directory %1 exists but is not writable
-
Cannot create temporary directory %1
-
Cannot create %1
-
Cannot remove mapset lock: %1
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
Cannot read raster map region
-
Cannot read vector map region
-
Cannot read region
-
Cannot open GISRC file
-
Cannot start module
-
command: %1 %2
-
Cannot run module
-
command: %1 %2<br>%3<br>%4
-
Cannot get projection
-
Cannot get raster extent
-
Cannot get map info
-
Cannot get colors
-
Cannot query raster
-
Cannot draw raster
-
Loading of the MSSQL provider failed
-
Unsupported type for field %1
-
Creation of fields failed
-
OGR[%1] error %2: %3
- OGR[%1] 錯誤 %2: %3
+
Unable to create the datasource. %1 exists and overwrite flag is false.
-
Unable to get driver %1
-
Arc/Info Binary Coverage
-
DODS
-
OpenFileGDB
-
ESRI Personal GeoDatabase
-
ESRI ArcSDE
-
ESRI Shapefiles
-
GeoPackage
-
Grass Vector
-
Informix DataBlade
-
Ingres
-
Mapinfo File
- Mapinfo檔案
+
MySQL
-
MSSQL
-
Oracle Spatial
-
ODBC
-
OGDI Vectors
-
PostgreSQL
- PostgreSQL
+
Systematic Organization of Spatial Information [SOSI]
-
SQLite/SpatiaLite
-
Storage and eXchange Format
-
UK. NTF2
-
U.S. Census TIGER/Line
-
VRT - Virtual Datasource
-
X-Plane/Flightgear
-
Duplicate field (10 significant characters): %1
-
Creating the data source %1 failed: %2
-
Unknown vector type of %1
-
Creation of OGR data source %1 failed: %2
-
field %1 with unsupported type %2 skipped
-
creation of field %1 failed
-
Couldn't create file %1.qpj
-
-
- Fetching features failed.
-SQL:%1
-Error: %2
-
Fetching features failed.
+SQL:%1
+Error: %2
+
+
+ Oracle
-
Connection to database failed
- 連結資料庫失敗
+
No owner name found
-
Creation of data source %1 failed:
%2
-
Field name clash found (%1 not remappable)
-
%1 not owner of the table %2.
-
Unable to determine number of geometry columns of layer %1.%2:
%3
-
Unable to delete layer %1.%2:
%3
-
Unable to clean metadata %1.%2:
%3
-
no result buffer
-
Fetching from cursor %1 failed
Database error: %2
-
PostGIS
- PostGIS
+
Infinite filter rectangle specified
-
Unable to delete layer %1:
%2
-
Unable to save layer style. It's not possible to create the destination table on the database. Maybe this is due to table permissions (user=%1). Please contact your database admin
-
Save style in database
-
A style named "%1" already exists in the database for this layer. Do you want to overwrite it?
-
Operation aborted. No changes were made in the database
-
Unable to save layer style. It's not possible to insert a new record into the style table. Maybe this is due to table permissions (user=%1). Please contact your database administrator.
-
Connection to database failed using username: %1
-
Error executing query: %1
-
Error executing the select query for related styles. The query was logged
-
Error executing the select query for unrelated styles. The query was logged
-
Error executing the select query. The query was logged
-
Consistency error in table '%1'. Style id should be unique
-
SQLite error: %2
SQL: %1
-
SQLite error getting feature: %1
-
creation of data source %1 failed. %2
-
loading of the layer %1 failed
-
creation of fields failed
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints [%1]
-
Unable to delete table %1
-
Unable to delete table %1:
-
Error looking for style. The query was logged
-
Unable to save layer style. It's not possible to create the destination table on the database.
-
Operation aborted
-
Error executing loading style. The query was logged
-
No styles available on DB
-
Error loading styles. The query was logged
-
The extra plugin path '%1' does not exist !
-
Couldn't load SIP module.
-
Python support will be disabled.
-
Couldn't set SIP API versions.
-
Couldn't load PyQt4.
-
Couldn't load PyQGIS.
-
Couldn't load QGIS utils.
-
An error occured during execution of following code:
-
Python version:
-
QGIS version:
-
Python path:
-
Python error
-
Undefined
- 未定義
+
Hidden
- 隱藏
+
Title
- 標題
+
Group
- 群組
+
Subgroup
-
Symbol
- 符號
+
Symbol label
-
Topology Checker
-
A Plugin for finding topological errors in vector layers
-
Using fix %1.
-
Topology plugin
-
intersecting geometries
-
features too close
-
point not covered by segment
-
segment too short
-
invalid geometry
-
dangling end
-
duplicate geometry
-
pseudo node
-
overlaps
-
gaps
-
point not covered
-
line ends not covered by point
-
point not in polygon
-
polygon does not contain point
-
multipart feature
-
+
+ Error describing bind parameters
+
+
+ Error binding parameters
+
Save style to DB (%1)
-
Could not save symbology because:
%1
-
Attribute index %1 out of bounds [0;%2]
-
radial
-
conical
-
feature
-
viewport
-
pad
-
repeat
-
reflect
-
Simplify transform error caught: %1
-
empty capabilities document
-
Dom Exception
-
Generated default style
-
Style was missing in capabilities
-
Displays a combo box containing values of attributes used for classification.
-
Field contains a color.
-
Combo box with values that can be used within the column's type. Must be supported by the provider.
-
Simplifies file selection by adding a file chooser dialog.
-
A hidden attribute will be invisible - the user is not able to see it's contents.
-
Read-only field that generates a UUID if empty.
-
-
- Legend
- 圖例
+
QSpatiaLiteDriver
- Error opening database
-
- Error closing database
-
- Unable to begin transaction
-
- Unable to commit transaction
-
- Unable to rollback transaction
-
@@ -11535,37 +11505,37 @@ Response was:
Unable to fetch row
-
No query
-
- Unable to execute statement
-
- Unable to execute multiple statements at a time
-
- Unable to reset statement
-
- Unable to bind parameters
-
- Parameter count mismatch
-
@@ -11573,82 +11543,82 @@ Response was:
No Error has occurred
-
Invalid file descriptor (port was not opened correctly)
-
Unable to allocate memory tables (POSIX)
-
Caught a non-blocked signal (POSIX)
-
Operation timed out (POSIX)
-
The file opened by the port is not a valid device
-
The port detected a break condition
-
The port detected a framing error (usually caused by incorrect baud rate settings)
-
There was an I/O error while communicating with the port
-
Character buffer overrun
-
Receive buffer overflow
-
The port detected a parity error in the received data
-
Transmit buffer overflow
-
General read operation failure
-
General write operation failure
-
Unknown error: %1
-
@@ -11691,17 +11661,17 @@ Response was:
Browser (2)
-
GPS Information
-
Log Messages
-
QGIS準備好了!
- Minimize
最小化
- Ctrl+M
Minimize Window
Ctrl+M
- Minimizes the active window to the dock
將目前的視窗縮小化至停駐位置
- Zoom
縮放
- Toggles between a predefined size and the window size set by the user
在預設大小與視窗大小中切換
- Bring All to Front
移置最上層
- Bring forward all open windows
所有開啟視窗向前顯示
- Current Edits
目前的編輯
- Error
錯誤
- Failed to open Python console:
開啟Python主控台時出現錯誤:
@@ -11808,7 +11778,7 @@ Response was:
Multiple instances of QGIS application object detected.
Please contact the developers.
-
QGIS - %1 ('%2')
- Panels
版面配置
- Toolbars
工具列
- Window
視窗
- &Database
資料庫(D&)
- &Web
網路(&Web)
- Progress bar that displays the status of rendering layers and other time-intensive operations
進度條用來顯示繪製圖層的進度，以及其它一些耗時的操作的進度
- Toggle extents and mouse position display
切換地圖範圍或滑鼠位置資訊
- Coordinate:
坐標:
- Current map coordinate
目前地圖坐標
- Shows the map coordinates at the current cursor position. The display is continuously updated as the mouse is moved. It also allows editing to set the canvas center to a given position. The format is lat,lon or east,north
-
- Current map coordinate (lat,lon or east,north)
-
- Scale
比例
- Current map scale
目前地圖比例
- Displays the current map scale
顯示目前的地圖比例
- Current map scale (formatted as x:y)
目前的地圖比例(使用x:y表示)
- Render
繪圖
- When checked, the map layers are rendered in response to map navigation commands and other events. When not checked, no rendering is done. This allows you to add a large number of layers and symbolize them before rendering.
當選取這一選項時，地圖圖層會在地圖移動或其它一些事件中被繪圖。不選取它，則不會進行繪圖。這可以讓您在繪圖以前新增大量的圖層並對它們進行符號化.
- Toggle map rendering
切換地圖繪圖
- This icon shows whether on the fly coordinate reference system transformation is enabled or not. Click the icon to bring up the project properties dialog to alter this behaviour.
-
- CRS status - Click to open coordinate reference system dialog
CRD狀況 - 按一下開啟坐標參考系統對話方塊
- Ready
我準備好了
- Map overview canvas. This canvas can be used to display a locator map that shows the current extent of the map canvas. The current extent is shown as a red rectangle. Any layer on the map can be added to the overview canvas.
地圖全覽圖。這個區域用來顯示一個定點陣圖，它顯示了地圖檢視的目前範圍。目前範圍以紅色矩形框顯示。地圖上的任何一個圖層都能夠新增到全覽圖中.
- Overview
全覽圖
- Map legend that displays all the layers currently on the map canvas. Click on the check box to turn a layer on or off. Double click on a layer in the legend to customize its appearance and set other properties.
目前地圖上顯示的所有圖層的圖例。按一下核取方塊顯示或隱藏圖層。在圖例上按兩下圖層來定制它的顯示並設定其它的屬性.
- Layers
圖層
- Map layer list that displays all layers in drawing order.
-
- Layer order
圖層順序
@@ -11957,410 +11927,406 @@ Please contact the developers.
私人的 qgis.db
- < Blank >
< Blank >
- QGIS version
QGIS版本
- QGIS code revision
QGIS原始碼版本
- Compiled against Qt
Qt 編譯版本
- Running against Qt
Qt 執行版本
- Compiled against GDAL/OGR
編譯GDAL/OGR
- Running against GDAL/OGR
執行GDAL/OGR版本
- PostgreSQL Client Version
PostgreSQL客戶端版本
- No support.
不支援。
- SpatiaLite Version
SpatiaLite 版本
- QWT Version
QWT版本
- PROJ.4 Version
PROJ.4 版本
- QScintilla2 Version
QScintilla2 版本
- This copy of QGIS writes debugging output.
這版的QGIS會自動輸出偵錯訊息
- %1 doesn't have any layers
%1沒有任何圖層
- Invalid Data Source
無效的資料來源
- %1 is not a valid or recognized data source
%1 不是一個有效或支援的資料來源
- Vector
向量
- PostgreSQL
PostgreSQL
- Cannot get PostgreSQL select dialog from provider.
-
- %1 is an invalid layer - not loaded
-
- %1 is an invalid layer and cannot be loaded. Please check the <a href="#messageLog">message log</a> for further info.
-
- QGIS files
QGIS檔案
- No legend entries selected
-
- Select the layers and groups you want to remove in the legend.
-
- Remove layers and groups
-
- Remove %n legend entries?
number of legend items to remove
-
-
+
- %n legend entries removed.
number of removed legend entries
-
-
+
- %1 (%2 type unsupported)
-
- http://qgis.org/en/site/forusers/commercial_support.html
http://qgis.org/en/site/forusers/commercial_support.html
- Do you want to save the current project? %1
您想要儲存目前專案嗎？ %1
- Invalid Layer
無效的圖層
- SpatiaLite
SpatiaLite
- Cannot get SpatiaLite select dialog from provider.
-
- Delimited Text
分隔文字檔案
- Cannot get Delimited Text select dialog from provider.
-
- MSSQL
-
- Cannot get MSSQL select dialog from provider.
-
- Oracle
-
- Cannot get Oracle select dialog from provider.
-
- WMS
- WMS
+
- Cannot get WMS select dialog from provider.
-
- WCS
-
- Cannot get WCS select dialog from provider.
-
- WFS
-
- Cannot get WFS select dialog from provider.
-
-
- Default failed to open: %1
-
-
- Default not found: %1
-
Default failed to open: %1
+
+
+ Default not found: %1
+
+
+ Open Template Project
-
- Auto-open Project
-
- Failed to open: %1
-
- Not valid project file: %1
-
- Project failed to open: %1
-
- Default template has been reopened: %1
-
- File not found: %1
-
- Calculating...
計算中...
- Abort...
放棄...
- Choose a QGIS project file to open
選擇QGIS專案檔案並開啟
- Loading project: %1
載入專案中: %1
- Unable to open project
無法開啟專案
- Security warning
安全性警告
- project macros have been disabled.
-
- Enable macros
啟用集巨
- Project loaded
專案已載入
- Choose a QGIS project file
選擇QGIS專案檔案
- Saved project to: %1
儲存專案至: %1
- Unable to save project %1
無法儲存專案: %1
- Choose a file name to save the QGIS project file as
選擇欲儲存的QGIS專案檔案名稱為
- Unable to load %1
無法載入 %1
- Choose a file name to save the map image as
請選擇地圖影像的檔名為
- Saved map image to %1
儲存地圖影像至 %1
- Default system font substituted.
-
- Labeling
標記
- Font for layer <b><u>%1</u></b> was not found (<i>%2</i>). %3
-
- Open labeling dialog
-
CRS was undefined
-
defaulting to project CRS %1 - %2
-
defaulting to CRS %1 - %2
-
日期/時間
- Compiled against GEOS
-
- Running against GEOS
-
- Layer creation failed. Please check the <a href="#messageLog">message log</a> for further information.
-
- Insufficient permissions
權限不足
- The project file is not writable.
-
- DXF export completed
-
- DXF export failed
-
- Commit errors
-
- Could not commit changes to layer %1
-
- Errors: %1
-
- Show more
-
- Labeling Options
-
- Please select a vector layer first
-
- Layer labeling settings
圖層標記設定
- Reading raster
-
- Cannot write raster error code: %1
-
- Saving done
儲存完成
- Export to vector file has been completed
-
- Save error
儲存錯誤
- Export to vector file failed.
Error: %1
-
- No Layer Selected
沒有選取的圖層
- To delete features, you must select a vector layer in the legend
要刪除圖徵，必須在圖例中選擇向量圖層
- No Vector Layer Selected
未選取向量圖層
- Deleting features only works on vector layers
刪除圖徵只對向量圖層有效
- Provider does not support deletion
提供者不支持刪除
- Data provider does not support deleting features
資料提供者不支援刪除圖徵
- Layer not editable
圖層不可編輯
- The current layer is not editable. Choose 'Start editing' in the digitizing toolbar.
目前的圖層是無法編輯的，請在[數位化工具列]中 選擇'開始編輯'。
- No Features Selected
無已選取的圖徵
- The current layer has not selected features
-
- Delete features
刪除圖徵
- Delete %n feature(s)?
number of features to delete
-
- 確定要刪除 %n 圖徵?
-
+ 確定要刪除 %n 圖徵?
- Features deleted
圖徵已刪除
- Problem deleting features
刪除圖徵出錯
- A problem occured during deletion of features
刪除圖徵時發生錯誤
- %n feature(s) deleted.
number of features deleted
-
- %n 圖徵已刪除。
-
+ %n 圖徵已刪除。
- Merging features...
合併圖徵...
- Abort
放棄
- Create unique print composer title
建立唯一的地圖出版設計標題
- (title generated if left empty)
(如果留白會自動產生)
- Composer title
設計標題
- Title can not be empty!
標題不能為空!
- Title already exists!
標題已存在!
- Composer %1
地圖設計 %1
- copy
複製
- No active layer
沒有作用中的圖層
- No active layer found. Please select a layer in the layer list
沒有發現作用中的圖層。請在圖層清單中選擇任一圖層
- Active layer is not vector
作用中的圖層不是向量圖層
- The merge features tool only works on vector layers. Please select a vector layer from the layer list
合併圖徵工具僅適用於向量圖層。請在圖層清單中選擇向量圖層
- Merging features can only be done for layers in editing mode. To use the merge tool, go to Layer->Toggle editing
合併圖徵僅號在圖層編輯模式中使用。要使用合併工具，請先至[圖層]->[切換編輯模式]
- Not enough features selected
-
- The merge tool requires at least two selected features
合併工具至少需要兩個圖徵
- Merged feature attributes
已合併圖徵屬性
- Merge failed
合併失敗
- An error occured during the merge operation
-
- Union operation canceled
-
-
- The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
-
+ The union operation would result in a geometry type that is not compatible with the current layer and therefore is canceled
+
+
+ Merged features
合併圖徵
- No active vector layer
無使用中的向量圖層
- To select features, choose a vector layer in the legend
- 選取圖徵，請先選擇圖例中的向量圖層
+
- Features cut
圖徵已剪下
- Features pasted
圖徵已貼上
- Paste features
貼上圖徵
- no features could be successfully pasted.
-
- %1 features were successfully pasted.
-
- %1 of %2 features could be successfully pasted.
-
- Pasted
已貼上
- New memory layer name
-
- Layer name
圖層名稱
- No features in clipboard.
-
- No features with geometry found, point type layer will be created.
-
- Multiple geometry types found, features with geometry different from %1 will be created without geometry.
-
- Cannot create new layer
-
- Cannot create field %1 (%2,%3)
-
- Cannot copy style: %1
-
- Cannot parse style: %1:%2:%3
-
- Cannot read style: %1
-
- Start editing failed
開始編輯失敗
- Provider cannot be opened for editing
資料來源不能以編輯模式開啟
- Stop editing
結束編輯
- Do you want to save the changes to layer %1?
您想將改變的內容儲存至圖層 %1?
- Problems during roll back
資料復原時發生問題
- Could not %1 changes to layer %2
Errors: %3
-
- rollback
-
- cancel
-
- Save
- 儲存
+
- all
-
- Rollback
-
- Cancel
- 取消
+
- Current edits
-
- %1 current changes for %2 layer(s)?
-
- copy
複製
- Plugin layer
-
- Memory layer
-
- Duplicate layer:
-
- %1 (duplication resulted in invalid layer)
-
- Set scale visibility for selected layers
-
-
- Couldn't load Python support library: %1
-
Couldn't load Python support library: %1
+
+
+ Couldn't resolve python support library's instance() symbol.
-
- Python support ENABLED :-)
-
- There is a new version of QGIS available
QGIS有新版本
- You are running a development version of QGIS
您正在使用QGIS的開發版本
- You are running the current version of QGIS
您正在使用QGIS的目前版本
- Would you like more information?
您想瞭解更多的資訊嗎?
- QGIS Version Information
QGIS版本資訊
- QGIS - Changes since last release
-
- Unable to get current version information from server
無法從伺服器得到目前版本的資訊
- Connection refused - server may be down
連接被拒絕 - 伺服器可能出現故障
- QGIS server was not found
未找到QGIS伺服器
- Unknown network socket error: %1
-
- Unable to communicate with QGIS Version server
%1
無法與QGIS版本伺服器溝通
%1
- To perform a full histogram stretch, you need to have a raster layer selected.
-
- To change brightness or contrast, you need to have a raster layer selected.
-
- en
documentation language
-
- Layer is not valid
圖層無效
- The layer %1 is not a valid layer and can not be added to the map
-
- The layer is not a valid layer and can not be added to the map
該圖層不是一個有效的圖層，無法加入到地圖中
- Project has layer(s) in edit mode with unsaved edits, which will NOT be saved!
-
- Save?
是否儲存?
- Current CRS: %1 (OTFR enabled)
目前的CRS: %1 (OTFR 啟用)
- Current CRS: %1 (OTFR disabled)
目前的CRS: %1 (OTFR 未啟用)
- Map coordinates for the current view extents
目前檢視範圍的地圖坐標
- Map coordinates at mouse cursor position
在滑鼠的位置顯示地圖坐標
- Extents:
範圍:
- Maptips require an active layer
地圖提示需要一個作用中的圖層
- %n feature(s) selected on layer %1.
number of selected features
-
-
+
- Open a GDAL Supported Raster Data Source
開啟GDAL支持的影像資料來源
- Error adding valid layer to map canvas
-
- Raster layer
-
- %1 is not a supported raster data source
%1 不是一個支援的影像資料來源
- Unsupported Data Source
不支持的資料來源
- Exit QGIS
- 退出QGIS
+
- Do you really want to quit QGIS?
-
- This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.
這專案檔是由較舊的QGIS版本建立。當儲存此專案檔時，QGIS將會專案更新至最新的版本，可能較舊版的QGIS無法使用。
- <p>This project file was saved by an older version of QGIS. When saving this project file, QGIS will update it to the latest version, possibly rendering it useless for older versions of QGIS.<p>Even though QGIS developers try to maintain backwards compatibility, some of the information from the old project file might be lost. To improve the quality of QGIS, we appreciate if you file a bug report at %3. Be sure to include the old project file, and state the version of QGIS you used to discover the error.<p>To remove this warning when opening an older project file, uncheck the box '%5' in the %4 menu.<p>Version of the project file: %1<br>Current version of QGIS: %2
-
- <tt>Settings:Options:General</tt>
Menu path to setting options
-
- Warn me when opening a project file saved with an older version of QGIS
開啟舊版QGIS檔案時提醒我
- Project file is older
專案檔是舊版
- This project file was saved by an older version of QGIS
這專案檔是由較舊的QGIS版本建立
- Please check the <a href="#messageLog">message log</a> for further info.
-
- A network request timed out, any data received is likely incomplete.
-
- Warning
- 警告
+
- This layer doesn't have a properties dialog.
-
- Authentication required
-
- Proxy authentication required
-
- SSL errors occured accessing URL %1:
-
-
Always ignore these errors?
@@ -13236,12 +13196,10 @@ Always ignore these errors?
永遠忽略這些錯誤?
- %n SSL errors occured
number of errors
-
-
+
@@ -13273,19 +13231,19 @@ Always ignore these errors?
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:x-large; font-weight:600;"><span style=" font-size:x-large;">QGIS</span></p></body></html>
-
QGIS is licensed under the GNU General Public License
-
http://www.gnu.org/licenses
-
about:blank
- 關於：空白
+
Essen (Germany), Developer meeting 2012
-
<p>For a list of individuals and institutions who have contributed money to fund QGIS development and other project costs see <a href="http://qgis.org/en/site/about/sponsorship.html#list-of-donors">http://qgis.org/en/site/about/sponsorship.html#list-of-donors</a></p>
-
Qt Image Plugin Search Paths <br>
-
@@ -13369,12 +13327,12 @@ p, li { white-space: pre-wrap; }
Warning
- 警告
+
Invalid field name. This field name is reserved and cannot be used.
-
@@ -13449,7 +13407,7 @@ p, li { white-space: pre-wrap; }
Add tab or group for %1
-
@@ -13457,27 +13415,27 @@ p, li { white-space: pre-wrap; }
Dialog
-
Create category
-
as
-
a tab
-
a group in container
-
@@ -13485,12 +13443,12 @@ p, li { white-space: pre-wrap; }
Select frame color
-
Select background color
-
@@ -13503,7 +13461,7 @@ p, li { white-space: pre-wrap; }
Fixed map position
-
Background color
- 背景色彩
+
QgsApplication
- Exception
意外錯誤
- unknown exception
未知的意外錯誤
- Application state:
QGIS_PREFIX_PATH env var: %1
Prefix: %2
@@ -13644,65 +13602,65 @@ Default Theme Path: %7
SVG Search Paths: %8
User DB Path: %9
-
-
match indentation of application state
-
- [ERROR] Can not make qgis.db private copy
-
- Could not open qgis.db
-
- Migration of private qgis.db failed.
%1
-
- Update of view in private qgis.db failed.
%1
-
QgsAtlasComposition
- Atlas filter eval error: %1
-
- Composer
出圖設計
- No matching atlas features
-
- Atlas feature %1 of %2
-
- Atlas filename evaluation error: %1
-
@@ -13711,35 +13669,35 @@ User DB Path: %9
Could not evaluate filename pattern
-
Could not set filename pattern as '%1'.
+ Could not set filename pattern as '%1'.
Parser error:
%2
-
Expression based filename
-
Atlas preview
-
No matching atlas features found!
- 無發現配合的輿圖功能!
+
Expression based filter
- 表示式過濾
+
@@ -13813,12 +13771,12 @@ Parser error:
Select an action
File dialog window title
-
Insert expression
- 插入表達式
+
To create an attribute action, you must provide both a name and the action to perform.
-
Echo attribute's value
-
Get feature id
-
Selected field's value (Identify features tool)
-
Clicked coordinates (Run feature actions tool)
-
Open file
- 開啟檔案
+
Search on web based on attribute's value
-
@@ -13871,7 +13829,7 @@ Parser error:
Attribute Actions
-
This list contains all actions that have been defined for the current layer. Add actions by entering the details in the controls below and then pressing the Add to action list button. Actions can be edited here by double clicking on the item.
-
Open
- 開啟
+
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters that start with a % and then have the name of a field will be replaced by the value of that field. The special characters %% will be replaced by the value of the field that was selected. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Enter the action here. This can be any program, script or command that is available on your system. When the action is invoked any set of characters within [% and %] will be evaluated as expression and replaced by its result. Double quote marks group text into single arguments to the program, script or command. Double quotes will be ignored if prefixed with a backslash
-
Browse for action
-
Clicking the button will let you select an application to use as the action
-
...
-
Inserts an expression into the action
- 插入表示式至動作中
+
Inserts the selected field into the action
- 插入選取的欄位至動作中
+
Load values from layer
-
Layer
- 圖層
+
Description
-
Value
- 值
+
Select data from attributes in selected layer.
-
View All
-
Insert NULL value on top
-
@@ -14129,12 +14087,12 @@ Parser error:
Ascending
- 升冪
+
Descending
- 降冪
+
@@ -14142,22 +14100,22 @@ Parser error:
Select attributes
-
Columns
-
Reset
- 重設
+
Sorting
-
@@ -14165,7 +14123,7 @@ Parser error:
Attribute changed
-
@@ -14183,12 +14141,12 @@ Parser error:
?
-
Delete selected features (DEL)
-
Ctrl+U
-
Ctrl+J
- Ctrl+J
+
Ctrl+E
-
Ctrl+W
-
Filters the visible features according to the current filter selection and filter string.
-
mMainViewButtonGroup
-
=
- =
+
Ctrl+F
- Ctrl+F
+
The filter defines which features are currently shown in the list or on the table
-
Filter all the features which have been edited but not yet saved
-
Attribute table - %1 (%n Feature(s))
feature count
-
- 屬性表格 - %1 (%n 圖徵)
-
+ 屬性表格 - %1 (%n 圖徵)
Edit Widget Properties
-
Label on top
-
@@ -14530,67 +14486,67 @@ Parser error:
Normal
- 正常
+
Lighten
-
Screen
-
Dodge
-
Addition
-
Darken
-
Multiply
-
Burn
-
Overlay
-
Soft light
-
Hard light
-
Difference
- 切除(Difference)
+
Subtract
-
@@ -14598,7 +14554,7 @@ Parser error:
&Add
- 加入 (&A)
+
&Zoom to
-
ID
-
xMin
-
yMin
-
xMax
-
yMax
-
SRID
-
Unable to create the bookmark.
Driver:%1
Database:%2
-
Are you sure you want to delete %n bookmark(s)?
number of rows
-
- 您確定要刪除%n書籤?
-
+ 您確定要刪除%n書籤?
WMS
- WMS
+
Cannot get WMS select dialog from provider.
-
CRS
-
Ctrl+Shift+N
- Ctrl+Shift+N
+
F5
- F5
+
Ctrl+Shift+W
- Ctrl+Shift+W
+
@@ -14815,12 +14769,12 @@ Database:%2
Dialog
-
Path
- 路徑
+
@@ -14828,22 +14782,22 @@ Database:%2
Case Sensitive
-
Filter Pattern Syntax
-
Normal
- 正常
+
Wildcard(s)
-
Add as a favourite
-
Remove favourite
-
Properties
- 屬性
+
Fast scan this dir.
-
Add Layer
-
Add Selected Layers
-
Add a directory
-
Add directory to favourites
-
Error
- 錯誤
+
Layer Properties
- 圖層屬性
+
Directory Properties
-
@@ -14912,49 +14866,49 @@ Database:%2
Browser
-
Refresh
- 重新整理
+
Add Selected Layers
-
Add
- 加入
+
Filter Files
-
...
-
Collapse All
- 全部收合
+
Options
- 選項
+
Filter files
-
@@ -14962,27 +14916,27 @@ Database:%2
Dialog
-
Display Name
-
Layer Source
-
Provider
-
Metadata
- 詮釋資料
+
@@ -14990,17 +14944,17 @@ Database:%2
Project home
-
Home
-
Favourites
-
@@ -15109,23 +15063,23 @@ Database:%2
<html><head/><body><p>Example formats:</p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><a href="http://qt-project.org/doc/qt-5.0/qtcore/qdatetime.html#toString"><span style=" text-decoration: underline; color:#0000ff;">Reference documentation</span></a></p></body></html>
-
QgsCategorizedSymbolRendererV2Model
- Symbol
符號
- Value
值
- Label
標記
@@ -15188,49 +15142,49 @@ Database:%2
進階設定
- Random colors
隨機色彩
- Symbol levels...
符號層級...
- High number of classes!
類別數量過大!
- Classification would yield %1 entries which might not be expected. Continue?
分類產生%1 無預期的項目。是否繼續？
- Error
錯誤
- There are no available color ramps. You can add them in Style Manager.
沒有可用的色彩對映表。您可以在樣式管理中新增。
- The selected color ramp is not available.
已選取的色彩樣式表不能使用。
- Confirm Delete
確認刪除
- The classification field was changed from '%1' to '%2'.
+ The classification field was changed from '%1' to '%2'.
Should the existing classes be deleted before classification?
分類欄位改變從'%1' 至 '%2'。
分類前是否刪除已有的分類？
@@ -15288,25 +15242,20 @@ Should the existing classes be deleted before classification?
QgsColorButton
- Select Color
選取色彩
- Copy color
複製色彩
- Paste color
貼上色彩
-
- Pick color
-
QgsColorDialog
@@ -15378,7 +15327,7 @@ Should the existing classes be deleted before classification?
Composer
出圖設計
@@ -15537,8 +15486,8 @@ Should the existing classes be deleted before classification?
Set as atlas feature for %1
設定為輿圖功能 %1
@@ -15575,7 +15524,7 @@ Should the existing classes be deleted before classification?
Choose a file name to save the map as
選擇一個檔名作為地圖存儲之用
@@ -15586,15 +15535,15 @@ Should the existing classes be deleted before classification?
Empty filename pattern
空的檔名格式
The filename pattern is empty. A default one will be used.
空的檔名格式。系統使用預設的名稱。
@@ -15605,15 +15554,15 @@ Should the existing classes be deleted before classification?
Unable to write into the directory
無法寫入資料夾
The given output directory is not writable. Cancelling.
輸出的資料夾不能寫入。取消中。
@@ -15623,251 +15572,251 @@ Should the existing classes be deleted before classification?
Atlas processing error
輿圖處理錯誤
Feature filter parser error: %1
圖徵過濾解析錯誤: %1
Error creating %1.
建立錯誤 %1。
Rendering maps...
繪製地圖...
Abort
放棄
- Big image
大型影像圖
- To create image %1x%2 requires about %3 MB of memory. Proceed?
建立影像檔 %1x%2像素，至少需要%3 M的記憶體。請問要繼續嗎？
- Choose a file name to save the map image as
請選擇地圖影像的檔名為
- Memory Allocation Error
記憶體分配錯誤
- Trying to create image #%1( %2x%3 @ %4dpi ) may result in a memory overflow.
Please try a lower resolution or a smaller papersize
嘗試建立影像#%1（%2%3 @ %4dpi ）可能會導致記憶體溢出.
請嘗試調低解析度或者用更小尺寸的紙張
- Image export error
影像輸出錯誤
- Directory where to save image files
儲存影像檔的資料夾
- Image format:
圖片格式:
- SVG warning
SVG警告
- Don't show this message again
不是再顯示此訊息
- <p>The SVG export function in QGIS has several problems due to bugs and deficiencies in the
<p>QGIS匯出SVG的功能存在數個問題，原因可能是有bugs與不完整的
- Qt4 svg code. In particular, there are problems with layers not being clipped to the map bounding box.</p>
Qt4 svg程式碼。特別是地圖邊框裁切的問題。</p>
- If you require a vector-based output file from Qgis it is suggested that you try printing to PostScript if the SVG output is not satisfactory.</p>
如果您需要從QGIS得到一個基於向量的輸出檔案，且SVG輸出不能讓您滿意，建議您嘗試使用PostScript檔案。 </p>
- SVG Format
SVG格式
- Directory where to save SVG files
儲存SVG檔案的資料夾
- SVG export error
SVG匯出錯誤
- on page
-
- SVG error
SVG錯誤
- There was an error in SVG output for SVG layer
SVG圖層使用SVG匯出時發生錯誤
- copy
複製
- Duplicating composer...
建立地圖設計的複本....
- Duplicate Composer
複製地圖設計
- Composer duplication failed.
複製地圖設計失敗。
- Save template
儲存範本
- Composer templates
地圖設計範本
- Save error
儲存錯誤
- Error, could not save file
錯誤，無法儲存檔案
- Load template
載入範本
- Read error
讀取錯誤
- Error, could not read file
錯誤，無法讀取檔案
- Composer error
地圖設計錯誤
- Error, could not create new composer
錯誤，無法建立新的地圖設計
- Loading template into composer...
載入範本至地圖設計...
- Project contains WMS layers
專案中包含WMS圖層
- Some WMS servers (e.g. UMN mapserver) have a limit for the WIDTH and HEIGHT parameter. Printing layers from such servers may exceed this limit. If this is the case, the WMS layer will not be printed
一些WMS伺服器(例如UMN Mapserver)有限制高度與寬度的參數。當您在列印這些圖層時不能超過這限制。所以這些WMS圖層並不一定可以列印
- Project contains composition effects
專案包含合成效果
- Advanced composition effects such as blend modes or vector layer transparency are enabled in this project, which cannot be printed as vectors. Printing as a raster is recommended.
本專案啟用進階合成效果不能列以向量方式列印，例如混合模式和向量圖層透明。建議以影像方式列印。
- Print as raster
列印為影像
- Landscape
橫向
@@ -16913,42 +16862,42 @@ Please try a lower resolution or a smaller papersize
Use existing frames
-
Extend to next page
-
Repeat on every page
-
Repeat until finished
-
Change html url
-
Select HTML document
-
Change resize mode
-
Use smart breaks changed
-
@@ -16986,95 +16935,95 @@ Please try a lower resolution or a smaller papersize
Add Frame
-
Use smart page breaks
-
Maximum distance
- 最大距離
+
mm
- mm
+
Refresh HTML
-
QgsComposerItemWidget
- Frame color changed
-
- Background color changed
-
- Item position changed
-
- Item outline width
-
- Item frame join style
-
- Item frame toggled
-
- Item background toggled
-
- Select background color
-
- Select frame color
-
- Item blend mode changed
-
- Item transparency changed
-
- Item id changed
-
- Item rotation changed
-
@@ -17085,115 +17034,104 @@ Please try a lower resolution or a smaller papersize
全域選項
- Position and size
位置與大小
- Reference point
參考點
- X
X
- Y
Y
- Width
寬度
- Height
高度
- Page
頁
- ...
-
-
- Rotation
旋轉
- °
°
- Frame
框線
- mm
- mm
+
- Join style
接點樣式
- Rendering
繪圖
- Blending mode
混合模式
- Thickness
厚度
- Color...
色彩...
- Background
背景
- Transparency
透明度
- Item ID
項目ID
- Id
Id
@@ -17203,43 +17141,43 @@ Please try a lower resolution or a smaller papersize
Label text HTML state changed
-
Label text changed
-
Label font changed
-
Label margin changed
-
Label color changed
-
- Insert expression
- 插入表達式
+
- Label alignment changed
-
@@ -17343,8 +17281,9 @@ Please try a lower resolution or a smaller papersize
QgsComposerLegend
+ Legend
- 圖例
+ 圖例
@@ -17383,140 +17322,140 @@ Please try a lower resolution or a smaller papersize
Item wrapping changed
-
Legend title changed
-
Legend title alignment changed
-
Legend column count
-
Legend split layers
-
Legend equal column width
-
Legend symbol width
-
Legend symbol height
-
Wms Legend width
-
Wms Legend height
-
Legend title space bottom
-
Legend group space
-
Legend layer space
-
Legend symbol space
-
Legend icon label space
-
Title font changed
-
Legend group font changed
-
Legend layer font changed
-
Legend item font changed
-
Legend font color changed
-
Legend box space
-
Legend map changed
-
Legend item edited
-
Legend updated
-
Legend group added
-
- Map %1
地圖 %1
- None
-
@@ -17944,107 +17883,100 @@ Please try a lower resolution or a smaller papersize
QgsComposerMap
- Map %1
地圖 %1
- Map will be printed here
地圖會在此處印出
-
- Grid %1
-
QgsComposerMapWidget
- Cache
快取
- Render
繪圖
- Rectangle
矩形
- Solid
實線
- Cross
十字
- Markers
-
-
- Decimal
小數
- DegreeMinute
度、分
- DegreeMinuteSecond
度、分、秒
+ No frame
- 無邊框
+ 無邊框
- Zebra
斑馬線
- Map scale changed
地圖比例已改變
- Map rotation changed
地圖已旋轉
- Map extent changed
地圖範圍已改變
- Select font color
選取字型色彩
@@ -18060,223 +17992,164 @@ Please try a lower resolution or a smaller papersize
選取網格邊框填滿色彩
- Canvas items toggled
地圖畫面項目切換
- None
無
- Overview frame style changed
全覽圖邊框樣式已更改
- Overview centering mode changed
全覽圖中心模式已更改
- Grid %1
-
-
- Add map grid
-
-
- Draw "%1" grid
-
-
- Map unit
- 地圖單位
-
-
- Millimeter
- 公釐
-
-
- Centimeter
-
-
- change...
- 變更...
-
-
- Grid markers style changed
-
-
- Cross width changed
-
-
- Frame width changed
-
-
- Changed grid unit
-
-
- Grid blend mode changed
-
-
- Grid CRS changed
-
-
- Annotation color changed
-
-
- Grid checkbox toggled
網格選取方塊切換
- Grid interval changed
-
- Grid offset changed
-
- Grid line style changed
-
- Grid type changed
-
- Grid cross width changed
+
+
+ Annotation font changed
-
- Label font changed
+
+
+ Annotation distance changed
-
- Annotation format changed
-
- Annotation toggled
-
- Changed annotation precision
-
- Changed grid frame style
-
- Changed grid frame width
+
+
+ Changed grid frame line thickness
-
- Grid frame color changed
-
- Grid frame first fill color changed
-
- Grid frame second fill color changed
-
- Inside frame
-
- Outside frame
-
- Disabled
-
- Horizontal
水平
- Vertical
垂直
- Annotation position changed
標註位置已更改
- Changed annotation direction
改變標註方向
- Map %1
地圖 %1
@@ -18289,377 +18162,287 @@ Please try a lower resolution or a smaller papersize
地圖選項
- Map
地圖
- Main properties
主要屬性
- Update preview
更新預覽
- Scale
比例
- Map rotation
地圖旋轉
- Draw map canvas items
繪製地圖項目
- Lock layers for map item
為地圖項目鎖定圖層
- Extents
範圍
- X max
X最大
- Y min
Y最小
- Y max
Y最大
- Set to map canvas extent
設定為地圖範圍
- X min
X最小
- View extent in map canvas
在地圖畫面中檢視範圍
- Controlled by atlas
由輿圖控制
- Margin around feature
圖徵周圍邊寬
- %
%
- Fixed scale
固定比例
- Use one of the predefined scales of the project where the atlas feature best fits.
使用最適合輿圖圖徵的專案預定比例。
- Predefined scale (best fit)
預設比例(最佳)
+ Show grid
- 顯示格線
+ 顯示格線
+ Grid &type
- 格線類別(&t)
+ 格線類別(&t)
- Offset
偏移
- mm
mm
- Blend mode
混合模式
- Interval
區間
- Grid frame
格線框
- Frame size
框線大小
- Frame line thickness
框線粗細
- Color...
色彩...
- Frame fill colors
框線填滿色彩
- Marker style
- 圖示樣式
-
-
- Overview blending mode
全覽圖混合模式
- Invert overview
倒置全覽圖
- Center on overview
中心在全覽圖
- X
X
- °
°
- Y
Y
- Cross width
十字形寬
- Frame style
框線樣式
- Line style
線樣式
- ...
-
-
- Grids
-
-
- Add a new grid
-
-
- Remove selected grid
-
-
- Move selected grid up
-
-
- Move selected grid down
-
-
- Draw grid
-
-
- Grid type
- 格線類別
-
-
- CRS
-
-
- change...
變更...
- Interval units
-
-
- Map unit
- 地圖單位
-
-
- Millimeter
- 公釐
-
-
- Centimeter
-
-
- No frame
- 無邊框
-
-
- Zebra
- 斑馬線
-
-
- Draw coordinates
繪製坐標
- Format
格式
- Left
左
- Right
右
- Top
上
- Bottom
下
- Font
字型
- Font...
字型...
- Font color
- 字型色彩
-
-
- Distance to map frame
與地圖圖框之距離
- Coordinate precision
坐標精準度
- Font color...
字型色彩...
- Overview
全覽圖
- Overview frame
全覽圖線框
- Overview style
全覽圖樣式
- Change...
變更...
@@ -18674,46 +18457,46 @@ Please try a lower resolution or a smaller papersize
Change item size
-
%1 items selected
-
1 item selected
-
dx: %1 mm dy: %2 mm
-
width: %1 mm height: %2 mm
-
QgsComposerPicture
- Picture expression parsing error: %1
-
- Composer
出圖設計
- Picture expression eval error: %1
-
@@ -18726,64 +18509,64 @@ Please try a lower resolution or a smaller papersize
Picture changed
圖片已更改
- Expression based image path
-
- Picture rotation changed
-
- Select new preview directory
選擇新的預覽資料夾
- Picture resize mode changed
-
- Picture placement changed
-
- Picture source changed
-
- Picture source expression
-
- Rotation synchronisation toggled
-
- Rotation map changed
地圖已旋轉
- Map %1
- 地圖 %1
+
- Creating icon for file %1
建立檔案圖示%1
@@ -18950,32 +18733,32 @@ Please try a lower resolution or a smaller papersize
QgsComposerScaleBar
- units
單位
- km
km
- m
m
- miles
英里
- ft
英尺
- Nm
海里
@@ -18984,38 +18767,38 @@ Please try a lower resolution or a smaller papersize
QgsComposerScaleBarWidget
Single Box
單匣
Double Box
雙匣
Line Ticks Middle
刻度線條相交
Line Ticks Down
刻度在線條之下
Line Ticks Up
刻度在線條之上
Numeric
數字
@@ -19055,144 +18838,119 @@ Please try a lower resolution or a smaller papersize
海里
- Select fill color
-
-
- Select alternate fill color
-
-
- Select font color
-
-
- Select stroke color
-
-
- Map %1
地圖 %1
- Scalebar map changed
比例尺地圖已改變
- Scalebar line width
比例尺線條寬度
- Scalebar segment size
比例尺線段大小
- Scalebar segments left
比例尺左邊線段
- Number of scalebar segments changed
比例尺線段數已更改
- Scalebar height changed
比例尺高交已變更
- Scalebar font changed
比例尺字型已變更
- Scalebar font color changed
比例尺色型色彩已變更
- Scalebar color changed
比例尺色彩已變更
- Scalebar secondary color changed
-
-
- Scalebar stroke color changed
比例尺邊線色彩已變更
- Scalebar unit text
比例尺單位文字
- Scalebar map units per segment
比例尺每段的地圖單位
- Scalebar style changed
比例尺樣式已變更
- Scalebar label bar space
比例尺標籤間距
- Scalebar box content space
比例尺匣間距
- Scalebar alignment
比例尺對齊
- Scalebar changed to map units
比例尺改用地圖單位
- Scalebar changed to feet
比例尺改用英尺
- Scalebar changed to nautical miles
比例尺改用海里
- Scalebar changed to meters
比例尺改用公尺
- Scalebar line join style
比例尺線段接點樣式
- Scalebar line cap style
比例尺線段端點樣式
@@ -19335,11 +19093,6 @@ Please try a lower resolution or a smaller papersize
Secondary fill color...
-
-
- Stroke color...
邊線色彩...
@@ -19349,37 +19102,37 @@ Please try a lower resolution or a smaller papersize
Ellipse
橢圓
Rectangle
矩形
Triangle
三角形
- Shape style changed
形狀樣式已更改
- Shape radius changed
形狀半徑已更改
- Shape type changed
形狀類別已更改
@@ -19456,44 +19209,44 @@ Please try a lower resolution or a smaller papersize
Table feature filter toggled
-
Table feature filter modified
-
Expression based filter
- 表示式過濾
+
Table header alignment changed
-
Table layer changed
-
Table attribute settings
-
Table map changed
-
Table maximum columns
-
Table header font
-
Table content font
-
Table grid stroke
-
Select grid color
-
Table grid color
-
Table grid toggled
-
Table visible only toggled
-
@@ -19716,62 +19469,62 @@ Please try a lower resolution or a smaller papersize
QGIS
- QGIS
+
Label added
-
Scale bar added
-
Legend added
-
Picture added
-
Table added
-
Shape added
-
Move item content
- 移動項目內容
+
Arrow added
-
Map added
-
Html item added
-
Html frame added
-
Item moved
-
Zoom item content
-
QgsComposition
- Label added
-
- Map added
-
- Arrow added
-
- Scale bar added
-
- Shape added
-
- Picture added
-
- Legend added
-
- Table added
-
+
+ Aligned items left
+
+
+ Aligned items horizontal center
+
+
+ Aligned items vertical center
+
Aligned items left
-
-
- Aligned items horizontal center
-
-
- Aligned items vertical center
-
-
- Aligned items right
-
- Aligned items top
-
- Aligned items bottom
-
- Items locked
項目鎖定
- Items unlocked
-
- Item z-order changed
-
- Remove item group
-
- Frame deleted
-
- Item deleted
-
- Multiframe removed
-
@@ -19947,148 +19700,148 @@ Please try a lower resolution or a smaller papersize
Landscape
橫向
Portrait
直向
Map %1
地圖 %1
- A5 (148x210 mm)
A5 (148x210 mm)
- A4 (210x297 mm)
A4 (210x297 mm)
- A3 (297x420 mm)
A3 (297x420 mm)
- A2 (420x594 mm)
A2 (420x594 mm)
- A1 (594x841 mm)
A1 (594x841 mm)
- A0 (841x1189 mm)
A0 (841x1189 mm)
- B5 (176 x 250 mm)
B5 (176 x 250 mm)
- B4 (250 x 353 mm)
B4 (250 x 353 mm)
- B3 (353 x 500 mm)
B3 (353 x 500 mm)
- B2 (500 x 707 mm)
B2 (500 x 707 mm)
- B1 (707 x 1000 mm)
B1 (707 x 1000 mm)
- B0 (1000 x 1414 mm)
B0 (1000 x 1414 mm)
- Legal (8.5x14 in)
Legal (8.5x14 in)
- ANSI A (Letter; 8.5x11 in)
ANSI A (Letter; 8.5x11 in)
- ANSI B (Tabloid; 11x17 in)
ANSI B (Tabloid; 11x17 in)
- ANSI C (17x22 in)
ANSI C (17x22 in)
- ANSI D (22x34 in)
ANSI D (22x34 in)
- ANSI E (34x44 in)
ANSI E (34x44 in)
- Arch A (9x12 in)
Arch A (9x12 in)
- Arch B (12x18 in)
Arch B (12x18 in)
- Arch C (18x24 in)
Arch C (18x24 in)
- Arch D (24x36 in)
Arch D (24x36 in)
- Arch E (36x48 in)
Arch E (36x48 in)
- Arch E1 (30x42 in)
Arch E1 (30x42 in)
- Custom
自訂
@@ -20106,131 +19859,109 @@ Please try a lower resolution or a smaller papersize
紙張及品質
- Presets
樣式
- ...
-
-
- Width
寬度
- Height
高度
- Units
單位
- Number of pages
頁數
- Orientation
紙張方向
- Export resolution
輸出解析度
- Print as raster
以影像列印
-
- Snap tolerance
- 自動接合容許值
-
-
- px
- px
-
Change...
變更...
- Page background
紙張背景
+ Grid
- 隔線
+ 隔線
- dpi
dpi
- World file on
World檔案在
- Guides and Grid
-
-
- Grid spacing
-
-
- mm
mm
- Grid offset
格線偏移
- x:
x:
- y:
y:
+ Spacing
- 間距
+ 間距
+ Snap to alignments
- 自動對齊
+ 自動對齊
+ Tolerance
- 容許範圍
+ 容許範圍
@@ -20279,13 +20010,13 @@ Please try a lower resolution or a smaller papersize
Save shortcuts
-
XML file
-
Saving shortcuts
-
Cannot write file %1:
%2.
-
Load shortcuts
-
Loading shortcuts
-
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an shortcuts exchange file.
-
The file contains shortcuts created with different locale, so you can't use it.
-
Error starting help viewer [%1]
-
Context help
-
<h3>Oops! QGIS can't find help for this form.</h3>The help file for %1 was not found for your language<br>If you would like to create it, contact the QGIS development team
-
@@ -20388,35 +20119,35 @@ Please try a lower resolution or a smaller papersize
The source spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
CRS
-
The destination spatial reference system (CRS) is not valid. The coordinates can not be reprojected. The CRS is: %1
-
inverse transform
-
forward transform
-
%1 of
%2PROJ.4: %3 +to %4
Error: %5
-
@@ -20470,19 +20201,19 @@ Error: %5
All by author
-
You can download a more complete set of cpt-city gradients by installing the "Color Ramp Manager" plugin (you must enable Experimental plugins in the plugin manager).
-
All Ramps (%1)
-
%1 directory details
-
%1 gradient details
-
@@ -20515,53 +20246,53 @@ and current file is [%3]
cpt-city color ramp
-
Selection and preview
-
License
- 授權
+
Palette
- 調色盤
+
Path
- 路徑
+
Information
- 資訊
+
Author(s)
-
Source
- 源
+
Details
-
Save as standard gradient
-
@@ -20569,28 +20300,28 @@ and current file is [%3]
Enter Credentials
-
Username
- 使用者名稱
+
Password
- 密碼
+
TextLabel
- 文字標記
+
Realm
-
@@ -20619,12 +20350,12 @@ and current file is [%3]
new CRS
-
The proj4 definition of '%1' is not valid.
-
Internal Error (source projection invalid?)
-
Error
- 錯誤
+
@@ -20840,17 +20571,17 @@ Google EPSG:3857 , 經緯度 EPSG:4326
Dash space pattern
-
Dash
-
Space
-
@@ -20895,7 +20626,7 @@ Google EPSG:3857 , 經緯度 EPSG:4326
double
-
<b><u>Data defined override</u></b><br>
-
<b>Active: </b>%1 <i>(ctrl|right-click toggles)</i><br>
-
double
-
'<red>,<green>,<blue>,<alpha>'
-
'<filename>'
-
'linear'|'radial'|'conical'
-
'feature'|'viewport'
-
'pad'|'repeat'|'reflect'
-
0 (false)|1 (true)
-
@@ -21149,68 +20880,68 @@ Google EPSG:3857 , 經緯度 EPSG:4326
Form
- 表單
+
<html><head/><body><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Format</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Examples result</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">dd.MM.yyyy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">21.05.2001</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ddd MMMM d yy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">Tue May 21 01</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">hh:mm:ss.zzz</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">14:13:09.042</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">h:m:s ap</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">2:13:9 pm</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Date output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">d</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the day as number without a leading zero (1 to 31)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the day as number with a leading zero (01 to 31)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">ddd</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">dddd</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized day name (e.g. 'Monday' to '</span><a href="http://qt-project.org/doc/qt-5/qt.html#DayOfWeek-enum"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">Qt::Sunday</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">M</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the month as number without a leading zero (1-12)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the month as number with a leading zero (01-12)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">MMM</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">MMMM</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the long localized month name (e.g. 'January' to 'December'). Uses the system locale to localize the name, i.e.</span><a href="http://qt-project.org/doc/qt-5/qlocale.html#system"><span style=" font-family:'Arial,FreeSans,sans-serif'; font-size:12px; font-weight:600; text-decoration: underline; color:#00732f;">QLocale::system</span></a><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;">().</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">yy</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the year as two digit number (00-99)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">yyyy</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the year as four digit number</span></p></td></tr></table><p><br/></p><table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#f6f6f6"><thead><tr><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Expression</span></p></td><td style=" vertical-align:top; padding-left:10; padding-right:15; padding-top:5; padding-bottom:5;"><p align="center"><span style=" font-family:'Open Sans,sans-serif'; font-size:12px; font-weight:600; color:#363534;">Time output</span></p></td></tr></thead><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">h</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">hh</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">H</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the hour without a leading zero (0 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">HH</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the hour with a leading zero (00 to 23, even with AM/PM display)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">m</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the minute without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">mm</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the minute with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">s</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the second without a leading zero (0 to 59)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ss</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the second with a leading zero (00 to 59)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">z</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the milliseconds without leading zeroes (0 to 999)</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">zzz</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">the milliseconds with leading zeroes (000 to 999)</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">AP or A</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">use AM/PM display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">A/AP</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "AM" or "PM".</span></p></td></tr><tr><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">ap or a</span></p></td><td bgcolor="#ffffff" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#ffffff;">use am/pm display.</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; font-style:italic; color:#66666e;">a/ap</span><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e;"> will be replaced by either "am" or "pm".</span></p></td></tr><tr><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">t</span></p></td><td bgcolor="#f6f6f6" style=" vertical-align:top; padding-left:10; padding-right:10; padding-top:3; padding-bottom:3;"><p><span style=" font-family:'Open Sans,sans-serif'; font-size:11px; color:#66666e; background-color:#f6f6f6;">the timezone (for example "CEST")</span></p></td></tr></table><p><br/></p></body></html>
-
Field format
-
date
-
time
-
date & time
-
custom format
-
...
-
Widget display
-
calendar popup
-
default
- 預設
+
custom
-
preview
-
@@ -21218,7 +20949,7 @@ Google EPSG:3857 , 經緯度 EPSG:4326
File '%1' not found in directory '%2'
-
Select datum transformations
-
src transform
-
dst transform
-
Remember selection
-
Hide deprecated
-
Destination CRS
- 目的CRS
+
Source CRS
- 來源CRS
+
Add PostGIS layers
-
New
- 新增
+
Edit
- 編輯
+
Delete
- 刪除
+
Load
Load connections from file
- 載入
+
Save connections to file
-
Save
- 儲存
+
Hold dialog open
-
Search options
- 尋找選項
+
Search
-
Search mode
- 搜尋模式
+
Search in columns
- 在欄位中尋找
+
@@ -21354,22 +21085,22 @@ Google EPSG:3857 , 經緯度 EPSG:4326
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
@@ -21377,71 +21108,71 @@ Google EPSG:3857 , 經緯度 EPSG:4326
Copyright Label Decoration
-
Enable copyright label
-
&Enter your copyright label here:
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana'; font-size:10pt;">© QGIS 2013</span></p></body></html>
-
&Placement
-
Bottom Left
-
Top Left
-
Bottom Right
-
Top Right
-
&Orientation
-
Horizontal
- 水平
+
Vertical
- 垂直
+
Color
- 色彩
+
@@ -21452,27 +21183,27 @@ p, li { white-space: pre-wrap; }
Error
- 錯誤
+
No active layer
- 沒有作用中的圖層
+
Please select a raster layer
- 請選取影像圖層
+
Invalid raster layer
-
Layer CRS must be equal to project CRS
-
@@ -21480,7 +21211,7 @@ p, li { white-space: pre-wrap; }
Grid properties
-
Update Interval / Offset from
-
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
North arrow pixmap not found
-
@@ -21631,62 +21362,62 @@ p, li { white-space: pre-wrap; }
North Arrow Decoration
-
Preview of north arrow
-
Angle
- 角度
+
Placement
- 位置
+
Placement on screen
-
Top Left
-
Top Right
-
Bottom Left
-
Bottom Right
-
Enable North Arrow
-
Set direction automatically
-
Pixmap not found
- 未找到Pixmap
+
@@ -21694,102 +21425,102 @@ p, li { white-space: pre-wrap; }
Bottom Left
-
Top Left
-
Top Right
-
Bottom Right
-
Tick Down
-
Tick Up
-
Bar
-
Box
- 矩形框
+
km
- km
+
mm
- mm
+
cm
-
m
- m
+
miles
-
mile
- 英里
+
inches
-
foot
- 英尺
+
feet
- 英尺
+
degree
- 度
+
degrees
- 度
+
unknown
- 未知
+
@@ -21797,97 +21528,97 @@ p, li { white-space: pre-wrap; }
Scale Bar Decoration
-
Placement
- 位置
+
Top Left
-
Top Right
-
Bottom Left
-
Bottom Right
-
Scale bar style
-
Select the style of the scale bar
-
Tick Down
-
Tick Up
-
Box
- 矩形框
+
Bar
-
Color of bar
-
Size of bar
-
Enable scale bar
-
Automatically snap to round number on resize
-
metres/km
-
feet/miles
-
degrees
- 度
+
@@ -21903,12 +21634,12 @@ p, li { white-space: pre-wrap; }
File type string in %1 is not correctly formatted
-
File cannot be opened or delimiter parameters are not valid
-
%0 field %1 is not defined in delimited text file
-
Invalid record format at line %1
-
Invalid WKT at line %1
-
Invalid X or Y fields at line %1
-
%1 records discarded due to invalid format
-
%1 records discarded due to missing geometry definitions
-
%1 records discarded due to invalid geometry definitions
-
%1 records discarded due to incompatible geometry types
-
Errors in file %1
-
The following lines were not loaded into QGIS due to errors:
-
There are %1 additional errors in the file
-
Delimited text file errors
-
Invalid subset string %1 for %2
-
The file has been updated by another application - reloading
-
@@ -21994,22 +21725,22 @@ p, li { white-space: pre-wrap; }
No layer name
-
Please enter a layer name before adding the layer to the map
-
No delimiters set
-
Use one or more characters as the delimiter, or choose a different delimiter type
-
Please enter a valid regular expression as the delimiter, or choose a different delimiter type
-
Invalid delimited text file
-
Please enter a valid file and delimiter
-
Choose a delimited text file to open
-
Text files
-
Please select an input file
-
File %1 does not exist
-
Please enter a layer name
-
At least one delimiter character must be specified
-
^.. expression needs capture groups
-
Definition of filename and delimiters is not valid
-
No data found in file
-
%1 badly formatted records discarded
-
X and Y field names must be selected
-
X and Y field names cannot be the same
-
The WKT field name must be selected
-
%1 badly formatted records discarded from sample data
-
All files
-
@@ -22117,105 +21848,105 @@ p, li { white-space: pre-wrap; }
Create a Layer from a Delimited Text File
-
File Name
- 檔案名稱
+
Full path to the delimited text file
-
Full path to the delimited text file. In order to properly parse the fields in the file, the delimiter must be defined prior to entering the file name. Use the Browse button to the right of this field to choose the input file.
-
Layer name
- 圖層名稱
+
Name to display in the map legend
-
Name displayed in the map legend
-
Browse to find the delimited text file to be processed
-
Use this button to browse to the location of the delimited text file. This button will not be enabled until a delimiter has been entered in the <i>Delimiter</i> box. Once a file is chosen, the X and Y field drop-down boxes will be populated with the fields from the delimited text file.
-
Browse...
- 瀏覽...
+
The file is a comma separated value file, fields delimited by commas and quoted by "
-
Each line in the file is split using a regular expression to define the end of each field
-
Tab
-
Space
-
Comma
-
Encoding
- 編碼
+
Select the file encoding
-
X and Y coordinates are expressed in degrees/minutes/seconds
-
DMS coordinates
-
Name of the field containing well known text value
-
Point
- 點
+
Line
- 線
+
Polygon
- 多邊形
+
The number of lines to discard from the beginning of the file
-
Field names are read from the first record. If not selected then fields are numbered
-
Fields are defined by the specified delimiter, quote, and escape characters
-
Use a spatial index to improve performance of displaying and spatially selecting features
-
Use an index to improve performance of subset filters (set in layer properties)
-
Watch for changes to the file by other applications while QGIS is running
-
Geometry is a point defined by X and Y coordinate fields
-
Geometry is read as a well known text string from the selected fields
-
The file contains only attribute information - it will not be displayed on the map
-
Trim leading and trailing spaces from fields
-
Number fields use comma for a decimal separator
-
Comma character is one of the delimiters
-
Tab character is one of the delimiters
-
Space character is one of the delimiters
-
Colon character is one of the delimiters
-
Semicolon character is one of the delimiters
-
Semicolon
-
Other delimiters
-
Delimiters to use when splitting fields in the text file. The delimiter can be more than one character. These characters are used in addition to the comma, tab, space, colon, and semicolon options.
-
Quote
-
The quote character(s) enclose fields which may include delimiters and new lines
-
"
-
Escape
-
The escape character(s) force the next character to be treated as a normal character (that is not a delimiter, quote, or new line character). If the escape character is the same as a quote character, it only escapes itself and only within quotes.
-
Expression
- 表示式
+
Regular expression used to split each line into fields
-
Sample data
-
Colon
-
<p align="right">X field</p>
-
Name of the field containing x values
-
<p align="right">Y field</p>
-
Name of the field containing y values
-
@@ -22567,22 +22298,22 @@ p, li { white-space: pre-wrap; }
Form
- 表單
+
Heading Label
-
Detail label
-
Category label
-
@@ -22591,7 +22322,7 @@ p, li { white-space: pre-wrap; }
mm
- mm
+
The diagram type '%1' is unknown. A default type is selected for you.
-
You did not specify an interpolation value. A default value of %1 has been set.
-
Expression based attribute
-
You did not add any attributes to this diagram layer. Please specify the attributes to visualize on the diagrams or disable diagrams.
-
@@ -22889,7 +22620,7 @@ p, li { white-space: pre-wrap; }
Edit expression
-
The attribute value you enter here will correspond to the size entered in the field "Size" and the chosen "Size unit".
Leave empty to automatically apply the maximum value.
-
Will scale diagrams with a size smaller than the minimum size to the minimum size
-
x
-
y
-
Add expression
-
%1 degrees
-
%1 radians
-
%1 gon
-
@@ -23111,7 +22842,7 @@ Leave empty to automatically apply the maximum value.
Angle
- 角度
+
@@ -23119,50 +22850,50 @@ Leave empty to automatically apply the maximum value.
Expression based preview
-
Could not set preview column
-
Could not set column '%1' as preview column.
+ Could not set column '%1' as preview column.
Parser error:
%2
-
Run layer action
-
Open form
-
Loading features...
-
Abort
- 放棄
+
Attribute table
- 屬性表格
+
%1 features loaded.
-
@@ -23201,12 +22932,12 @@ Parser error:
Export as DXF
-
DXF files *.dxf *.DXF
-
@@ -23214,57 +22945,57 @@ Parser error:
DXF export
-
Symbology mode
-
Symbology scale
-
Save as
- 另存為
+
...
-
No symbology
- 無符號設計
+
Feature symbology
- 圖徵符號設計
+
Symbol layer symbology
- 符號圖層設計
+
Select all
- 全選
+
Unselect all
- 取消全部選取
+
Export features intersecting the current map extent
-
@@ -23273,12 +23004,12 @@ Parser error:
Unknown attribute editor widget '%1'
-
Could not save unknown editor widget type '%1'.
-
@@ -23286,12 +23017,12 @@ Parser error:
Symbol width
- 符號寬度
+
Symbol height
- 符號高度
+
Outline width
- 邊線寬度
+
Fill color
- 填滿色彩
+
Border color
- 邊線色彩
+
Symbol name
- 符號名稱
+
Offset
- 偏移
+
Horizontal anchor point
- 水平錨點
+
Vertical anchor point
- 垂直錨點
+
@@ -23344,7 +23075,7 @@ Parser error:
Cancel &All
-
@@ -23352,72 +23083,72 @@ Parser error:
Search method
-
Chain (fast)
-
Popmusic Tabu
-
Popmusic Chain
-
Popmusic Tabu Chain
-
FALP (fastest)
-
Number of candidates
-
Point
- 點
+
Line
- 線
+
Polygon
- 多邊形
+
(i.e. including colliding objects)
-
Draw text as outlines (recommended)
-
Show shadow rectangles (for debugging)
-
Show partials labels
-
Automated Placement Engine
-
Show candidates (for debugging)
-
@@ -23440,7 +23171,7 @@ Parser error:
Error
- 錯誤
+
@@ -23448,35 +23179,35 @@ Parser error:
Dialog
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Summary</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Detailed report.</p></body></html>
-
Always show details
-
Details >>
-
@@ -23484,7 +23215,7 @@ p, li { white-space: pre-wrap; }
Expression string builder
-
@@ -23492,87 +23223,87 @@ p, li { white-space: pre-wrap; }
(String Concatenation)
-
Joins two values together into a string
-
Usage
-
'Dia' || Diameter
-
Search
-
Addition operator
-
Subtraction operator
-
Multiplication operator
-
Division operator
-
Modulo operator
-
Power operator
-
Equal operator
-
Greater as operator
-
Less than operator
-
Unequal operator
-
Less or equal operator
-
Greater or equal operator
-
Parser Error
-
Eval Error
-
Expression is invalid <a href=more>(more info)</a>
-
More info on expression error
-
Load top 10 unique values
-
Load all unique values
-
@@ -23630,12 +23361,12 @@ p, li { white-space: pre-wrap; }
Field values
-
Load values
-
10 samples
-
Equal operator
-
Addition operator
-
Subtraction operator
-
Division operator
-
Multiplication operator
-
*
-
Power operator
-
^
- ^
+
String Concatenation
-
||
-
Open Bracket
-
(
-
Close Bracket
-
)
-
layer
- 圖層
+
map view
-
user defined
- 使用使定義
+
Extent (current: %1)
-
@@ -23825,37 +23556,37 @@ p, li { white-space: pre-wrap; }
Form
- 表單
+
West
- 西
+
East
- 東
+
North
- 北
+
South
- 南
+
Layer extent
-
Map view extent
-
@@ -23871,7 +23602,7 @@ p, li { white-space: pre-wrap; }
Dialog
-
@@ -24272,7 +24003,7 @@ p, li { white-space: pre-wrap; }
Suppress attribute form pop-up after feature creation
- 圖徵建立後避免彈出屬性編輯
+
...
-
Select a file
-
@@ -24351,13 +24082,13 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Millimeter
- 公釐
+
Map unit
- 地圖單位
+
@@ -24365,7 +24096,7 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Delete
- 刪除
+
Recenter
-
Remove
- 移除
+
@@ -24419,12 +24150,12 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
internal GPS
-
local gpsd
-
@@ -24455,27 +24186,27 @@ MyForms.py must live on PYTHONPATH, .qgis/python, or inside the project folder.<
Devices
-
Delete
- 刪除
+
New
- 新增
+
Update
- 更新
+
Device name
-
Track download
-
Route upload
-
Waypoint download
-
Route download
-
Track upload
-
Waypoint upload
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">In the download and upload commands there can be special words that will be replaced by QGIS when the commands are used. These words are:</span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%babel</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the path to GPSBabel<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%in</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the GPX filename when uploading or the port when downloading<br /></span><span style=" font-family:'Sans Serif'; font-size:9pt; font-style:italic;">%out</span><span style=" font-family:'Sans Serif'; font-size:9pt;"> - the port when uploading or the GPX filename when downloading</span></p></body></html>
-
@@ -24562,149 +24293,149 @@ p, li { white-space: pre-wrap; }
/gps
-
No path to the GPS port is specified. Please enter a path then try again.
-
Connecting...
-
Connecting to GPS device...
-
Timed out!
-
Failed to connect to GPS device.
-
Connected!
-
Dis&connect
-
Connected to GPS device.
-
Error opening log file.
-
Disconnected...
-
&Connect
-
Disconnected from GPS device.
-
%1 m
-
%1 km/h
-
Automatic
- 自動
+
Manual
- 手動
+
3D
- 3D
+
2D
- 2D
+
No fix
-
Differential
-
Non-differential
-
No position
-
Valid
-
Invalid
- 無效
+
Not enough vertices
-
Cannot close a line feature until it has at least two vertices.
-
Cannot close a polygon feature until it has at least three vertices.
-
Feature added
-
Error
- 錯誤
+
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
Cannot add feature. Unknown WKB type. Choose a different layer and try again.
-
Save GPS log file as
-
NMEA files
-
&Add feature
-
&Add Point
-
&Add Line
-
&Add Polygon
-
@@ -24775,12 +24506,12 @@ Errors: %2
GPS Connect
-
&Add feature
-
Add track point
-
Reset track
-
...
-
Position
- 位置
+
Signal
-
Satellite
-
Options
- 選項
+
Debug
-
&Connect
-
latitude of position fix (degrees)
-
Longitude
-
longitude of position fix (degrees)
-
antenna altitude with respect to geoid (mean sea level)
-
Altitude
-
Latitude
-
Time of fix
-
date/time of position fix (UTC)
-
speed over ground
-
Speed
- 速度
+
track direction (degrees)
-
Direction
- 方向
+
Horizontal Dilution of Precision
-
HDOP
-
Vertical Dilution of Precision
-
VDOP
-
Position Dilution of Precision
-
PDOP
-
GPS receiver configuration 2D/3D mode: Automatic or Manual
-
Mode
- 模式
+
position fix dimensions: 2D, 3D or No fix
-
Dimensions
- 維度
+
quality of the position fix: Differential, Non-differential or No position
-
Quality
-
position fix status: Valid or Invalid
-
Status
- 狀態
+
number of satellites used in the position fix
-
Satellites
-
H accurancy
-
V accurancy
-
Connection
-
Serial device
-
Refresh serial device list
-
Port
-
Host
- 主機
+
Device
-
00000;
-
gpsd
-
Internal
-
Digitizing
- 數位化
+
Track
-
Automatically add points
-
Track width in pixels
-
width
-
Color
- 色彩
+
save layer after every feature added
-
Automatically save added feature
-
save GPS data (NMEA sentences) to a file
-
Log File
-
browse for log file
-
Map centering
-
when leaving
-
% of map extent
-
never
- 從不
+
always
- 總是
+
Cursor
-
Small
-
Large
-
@@ -25146,7 +24877,7 @@ gray = no data
&GPS Tools
-
Creates a new GPX layer and displays it on the map canvas
-
&GPS
-
GPS eXchange file
- GPS 交換檔案
+
Unable to create a GPX file with the given name. Try again with another name or in another directory.
-
Unable to read the selected file.
Please reselect a valid file.
-
Could not convert data from %1!
-
Error converting data
-
This device does not support downloading of %1.
-
This device does not support uploading of %1.
-
GPS eXchange format
-
Waypoints from a route
-
Waypoints from a track
-
Route from waypoints
-
Track from waypoints
-
GPS eXchange format (*.gpx)
-
@@ -25394,7 +25125,7 @@ Please reselect a valid file.
File
- 檔案
+
Feature types
-
File to import
-
Feature type
-
Layer name
- 圖層名稱
+
GPX output file
-
GPS device
-
Port
-
Output file
- 輸出檔案
+
Data layer
-
GPX input file
-
Conversion
- 轉換
+
@@ -25535,7 +25266,7 @@ Please reselect a valid file.
Bad URI - you need to specify the feature type.
-
Dataset Description
-
Band %1
-
X: %1 Y: %2 Bands: %3
-
Dimensions
- 維度
+
Origin
-
Pixel Size
-
Band
- 波段
+
Format not supported
-
Cannot read data
-
Cannot get GDAL raster band: %1
-
@@ -25632,17 +25363,17 @@ Please reselect a valid file.
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -25650,122 +25381,122 @@ Please reselect a valid file.
A5 (148x210 mm)
- A5 (148x210 mm)
+
A4 (210x297 mm)
- A4 (210x297 mm)
+
A3 (297x420 mm)
- A3 (297x420 mm)
+
A2 (420x594 mm)
- A2 (420x594 mm)
+
A1 (594x841 mm)
- A1 (594x841 mm)
+
A0 (841x1189 mm)
- A0 (841x1189 mm)
+
B5 (176 x 250 mm)
- B5 (176 x 250 mm)
+
B4 (250 x 353 mm)
- B4 (250 x 353 mm)
+
B3 (353 x 500 mm)
- B3 (353 x 500 mm)
+
B2 (500 x 707 mm)
- B2 (500 x 707 mm)
+
B1 (707 x 1000 mm)
- B1 (707 x 1000 mm)
+
B0 (1000 x 1414 mm)
- B0 (1000 x 1414 mm)
+
Legal (8.5x14 inches)
-
ANSI A (Letter; 8.5x11 inches)
-
ANSI B (Tabloid; 11x17 inches)
-
ANSI C (17x22 inches)
-
ANSI D (22x34 inches)
-
ANSI E (34x44 inches)
-
Arch A (9x12 inches)
-
Arch B (12x18 inches)
-
Arch C (18x24 inches)
-
Arch D (24x36 inches)
-
Arch E (36x48 inches)
-
Arch E1 (30x42 inches)
-
@@ -25773,73 +25504,73 @@ Please reselect a valid file.
Configure Georeferencer
- 設定幾何校正(Georeferencer)
+
Point tip
-
Show IDs
-
Show coords
-
Residual units
-
Pixels
-
Use map units if possible
-
PDF report
-
Left margin
-
mm
- mm
+
Right margin
-
Show Georeferencer window docked
-
PDF map
-
Paper size
-
@@ -25854,9 +25585,9 @@ Please reselect a valid file.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:11pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:10pt;"></p></body></html>
-
@@ -25889,29 +25620,29 @@ p, li { white-space: pre-wrap; }
%1 is not a supported raster data source
- %1 不是一個支援的影像資料來源
+
Unsupported Data Source
- 不支持的資料來源
+
Raster loaded: %1
-
Georeferencer - %1
-
Transform:
-
Info
-
GDAL scripting is not supported for %1 transformation
-
Load GCP points
- 載入GCP控制點
+
GCP file
-
No GCP points to save
-
Save GCP points
-
Please load raster to be georeferenced
-
<p>The selected file already seems to have a world file! Do you want to replace it with the new world file?</p>
-
Failed to compute GCP transform: Transform is not solvable
-
Could not write to %1
-
GDAL files
-
DEM files
-
All files
-
Open raster file
-
Invalid Path: The file is either unreadable or does not exist
-
Invalid URL:
-
Do you want to add the datasource anyway?
-
Open 3D model file
-
Model files
-
@@ -26478,109 +26209,109 @@ p, li { white-space: pre-wrap; }
Globe Settings
- 地球設定
+
Elevation
-
Type
-
Raster
- 影像
+
TMS
-
URL/File
-
...
-
Up
-
Map
- 地圖
+
Base Layer
-
URL
-
TextLabel
- 文字標記
+
Sky
-
Date / Time (UTC)
-
dd.MM.yyyy HH:mm
-
Auto ambient
-
Vertical Scale
-
Down
-
Add
- 加入
+
Remove
- 移除
+
Cache
- 快取
+
Video
-
Anti Aliasing
-
Samples
-
[Leave empty for maximum]
-
<i>Changing video settings requires a restart of the globe plugin</i>
-
Model
-
Stereo
-
Stereo Mode
-
Screen distance (m)
-
Screen width (m)
-
Split stereo horizontal separation (px)
-
Split stereo vertical separation (px)
-
Split stereo vertical eye mapping
-
Screen height (m)
-
Eye separation (m)
-
Reset to defaults
-
Split stereo horizontal eye mapping
-
@@ -26689,32 +26420,32 @@ p, li { white-space: pre-wrap; }
Loading GML data
%1
-
Abort
- 放棄
+
Error: %1 on line %2, column %3
-
WFS
-
GML Getfeature network request failed with error: %1
-
Network
- 網路
+
@@ -26722,7 +26453,7 @@ p, li { white-space: pre-wrap; }
Cannot guess schema
-
@@ -26730,90 +26461,90 @@ p, li { white-space: pre-wrap; }
Millimeter
- 公釐
+
Map unit
- 地圖單位
+
Color (start)
- 色彩(開始)
+
Color (end)
- 色彩(結束)
+
Angle
- 角度
+
Gradient type
-
Coordinate mode
-
Spread
-
Reference Point 1 (x)
-
Reference Point 1 (y)
-
Reference Point 1 (is centroid)
-
Reference Point 2 (x)
-
Reference Point 2 (y)
-
Reference Point 2 (is centroid)
-
QgsGraduatedSymbolRendererV2Model
- Symbol
- 符號
+
- Value
- 值
+
- Label
-
@@ -26904,41 +26635,41 @@ p, li { white-space: pre-wrap; }
進階設定
- Symbol levels...
符號層級...
- Error
錯誤
- There are no available color ramps. You can add them in Style Manager.
沒有可用的色彩對映表。您可以在樣式管理中新增。
- The selected color ramp is not available.
已選取的色彩樣式表不能使用。
- Warning
警告
- Natural break classification (Jenks) is O(n2) complexity, your classification may take a long time.
Press cancel to abort breaks calculation or OK to continue.
自然間斷法分類 (Jenks) 的時間複雜度為O(n^2)，您的分類會花一段時間。
請按取消以放棄計算或按OK繼續進行。
- Renderer creation has failed.
繪製建立失敗。
@@ -27096,12 +26827,12 @@ Press cancel to abort breaks calculation or OK to continue.
<br>command: %1 %2<br>%3<br>%4
-
Cannot rename map %1
-
Remove the selected layer(s) from canvas before continue.
-
Are you sure you want to delete %n selected layer(s)?
number of layers to delete
-
- 您確定要刪除選取%n個圖層嗎？
-
+ 您確定要刪除選取%n個圖層嗎？
Cannot delete map %1
-
Cannot write new region
-
@@ -27152,17 +26881,17 @@ Press cancel to abort breaks calculation or OK to continue.
Warning
- 警告
+
You are not owner of the mapset, cannot open the vector for editing.
-
Cannot open vector for update.
- 無法開啟向量且更新。
+
Background
- 背景
+
Highlight
-
Dynamic
-
Point
- 點
+
Line
- 線
+
Boundary (no area)
-
Boundary (1 area)
-
Boundary (2 areas)
-
Centroid (in area)
-
Centroid (outside area)
-
Centroid (duplicate in area)
-
Node (1 line)
-
Node (2 lines)
-
Next not used
-
Manual entry
-
No category
-
Info
-
The table was created
-
Tool not yet implemented.
-
Cannot check orphan record: %1
-
Orphan record was left in attribute table. <br>Delete the record?
-
Cannot delete orphan record:
-
Cannot describe table for field %1
-
Left: %1
-
-- Middle: %1
-
-- Right: %1
-
@@ -27368,17 +27097,17 @@ Press cancel to abort breaks calculation or OK to continue.
Select line segment
-
New vertex position
-
Release
-
@@ -27386,7 +27115,7 @@ Press cancel to abort breaks calculation or OK to continue.
Select element
- 選取元素
+
@@ -27711,250 +27440,250 @@ Press cancel to abort breaks calculation or OK to continue.
Addition
-
Subtraction
-
Multiplication
-
Division
-
Modulus
-
Exponentiation
-
Equal
-
Not equal
-
Greater than
-
Greater than or equal
-
Less than
-
Less than or equal
-
And
-
Or
-
Absolute value of x
-
Inverse tangent of x (result is in degrees)
-
Inverse tangent of y/x (result is in degrees)
-
Current column of moving window (starts with 1)
-
Cosine of x (x is in degrees)
-
Convert x to double-precision floating point
-
Current east-west resolution
-
Exponential function of x
-
x to the power y
-
Convert x to single-precision floating point
-
Decision: 1 if x not zero, 0 otherwise
-
Decision: a if x not zero, 0 otherwise
-
Decision: a if x not zero, b otherwise
-
Decision: a if x > 0, b if x is zero, c if x < 0
-
Convert x to integer [ truncates ]
-
Check if x = NULL
-
Natural log of x
-
Log of x base b
-
Largest value
-
Median value
-
Smallest value
-
Mode value
-
1 if x is zero, 0 otherwise
-
Current north-south resolution
-
NULL value
-
Random value between a and b
-
Round x to nearest integer
-
Current row of moving window (Starts with 1)
-
Sine of x (x is in degrees)
sin(x)
-
Square root of x
sqrt(x)
-
Tangent of x (x is in degrees)
tan(x)
-
Current x-coordinate of moving window
-
Current y-coordinate of moving window
-
Output
- 輸出
+
Warning
- 警告
+
Cannot get current region
-
Cannot check region of map %1
-
Cannot get region of map %1
-
No GRASS raster maps currently in QGIS
-
Cannot create 'mapcalc' directory in current mapset.
-
New mapcalc
-
Enter new mapcalc name:
-
Enter vector name
-
The file already exists. Overwrite?
-
Save mapcalc
-
File name empty
-
Cannot open mapcalc file
-
The mapcalc schema (%1) not found.
-
Cannot open mapcalc schema (%1)
-
Cannot read mapcalc schema (%1):
-
%1
at line %2 column %3
-
-%1
-在行 %2 列 %3
+
@@ -28076,7 +27803,7 @@ at line %2 column %3
Module: %1
-
Warning
- 警告
+
The module file (%1) not found.
-
Cannot open module file (%1)
-
Cannot read module file (%1)
-
%1
at line %2 column %3
-
-%1
-在行 %2 列 %3
+
Module %1 not found
-
Cannot find man page %1
-
Please ensure you have the GRASS documentation installed.
-
Not available, description not found (%1)
-
Not available, cannot open description (%1)
-
Not available, incorrect description (%1)
-
Cannot get input region
-
Input %1 outside current region!
-
Use Input Region
-
Output %1 exists! Overwrite?
-
Cannot find module %1
-
Cannot start module: %1
-
<B>Successfully finished</B>
-
<B>Finished with error</B>
-
<B>Module crashed or killed</B>
-
@@ -28232,7 +27957,7 @@ at line %2 column %3
TextLabel
- 文字標記
+
Attribute field
- 屬性欄位
+
Warning
- 警告
+
'layer' attribute in field tag with key= %1 is missing.
-
@@ -28273,17 +27998,17 @@ at line %2 column %3
File
- 檔案
+
%1: missing value
-
%1: directory does not exist
-
@@ -28291,44 +28016,44 @@ at line %2 column %3
OGR/PostGIS/GDAL Input
-
Warning
- 警告
+
Cannot find layeroption %1
-
Cannot find whereoption %1
-
Password
- 密碼
+
Select a layer
- 選擇圖層
+
PostGIS driver in OGR does not support schemas!<br>Only the table name will be used.<br>It can result in wrong input if more tables of the same name<br>are present in the database.
-
%1: no input
-
@@ -28336,7 +28061,7 @@ at line %2 column %3
Input
- 輸入
+
Warning
- 警告
+
Cannot find typeoption %1
-
Cannot find values for typeoption %1
-
Cannot find layeroption %1
-
GRASS element %1 not supported
-
Use region of this map
-
Select a layer
- 選擇圖層
+
%1 (band %2)
-
Cannot get provider
-
%1: no input
-
@@ -28400,38 +28125,38 @@ at line %2 column %3
Browse
- 瀏覽
+
Output file
- 輸出檔案
+
GeoTIFF
- GeoTIFF
+
Warning
- 警告
+
Cannot parse version_min %1
-
Cannot parse version_max %1
-
%1: missing value
-
@@ -28439,7 +28164,7 @@ at line %2 column %3
Selected categories
-
@@ -28463,119 +28188,117 @@ at line %2 column %3
Warning
- 警告
+
Cannot find module %1
-
Cannot start module %1
-
<br>command: %1 %2<br>%3<br>%4
-
Cannot read module description (%1):
-
%1
at line %2 column %3
-
-%1
-在行 %2 列 %3
+
Region
-
Input layers
-
Current map canvas
-
Cannot find key %1
-
<< Hide advanced options
-
Show advanced options >>
-
Item with key %1 not found
-
Item with id %1 not found
-
Cannot get current region
-
Cannot check region of map %1
-
Cannot set region
-
Cannot get selected layer
-
Cannot get provider
-
The layer CRS (defined in QGIS) and data source CRS differ. We are not yet able to pass the layer CRS to GRASS module. Please set correct data source CRS or change layer CRS to data source CRS.
-
Cannot get raster provider
-
Cannot set region of map %1
-
@@ -28583,60 +28306,60 @@ at line %2 column %3
Database
- 資料庫
+
Location 1
-
System mapset
-
User's mapset
-
Location 2
-
Enter path to GRASS database
-
The directory doesn't exist!
-
No writable locations, the database is not writable!
-
Enter location name!
-
The location exists!
-
Selected projection is not supported by GRASS!
-
Warning
- 警告
+
Cannot create projection.
-
Cannot reproject previously set region, default region set.
-
North must be greater than south
-
East must be greater than west
-
Regions file (%1) not found.
-
Cannot open locations file (%1)
-
Cannot read locations file (%1):
-
%1
at line %2 column %3
-
-%1
-在行 %2 列 %3
+
Cannot create QgsCoordinateReferenceSystem
-
Cannot reproject selected region.
-
Cannot reproject region
-
Enter mapset name.
-
The mapset already exists
-
Database:
-
Location:
-
Mapset:
-
Create location
-
Cannot create new location: %1
-
Create mapset
-
Cannot create new mapset directory
-
Cannot open DEFAULT_WIND
-
Cannot open WIND
-
New mapset
-
New mapset successfully created, but cannot be opened: %1
-
New mapset successfully created and set as current working mapset.
-
@@ -28794,22 +28515,22 @@ at line %2 column %3
New Mapset
- 新的地圖集
+
GRASS Database
-
Tree
-
Comment
- 註解
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">GRASS data are stored in tree directory structure. The GRASS database is the top-level directory in this tree structure.</p></body></html>
-
Browse...
- 瀏覽...
+
GRASS Location
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS location is a collection of maps for a particular territory or project.</p></body></html>
-
Default GRASS Region
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS region defines a workspace for raster modules. The default region is valid for one location. It is possible to set a different region in each mapset. It is possible to change the default location region later.</p></body></html>
-
Mapset
- 地圖集(MapSet)
+
<p align="center">Existing mapsets</p>
-
Owner
- 使用者
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;">The GRASS mapset is a collection of maps used by one user. A user can read maps from all mapsets in the location but he can open for writing only his mapset (owned by user).</p></body></html>
-
Create New Mapset
-
Plugins
- 附加元件
+
&GRASS
-
Cannot open vector %1 in mapset %2 on level 2 (topology not available, try to rebuild topology using v.build module).
-
Cannot open vector %1 in mapset %2
-
GRASS vector map %1 does not have topology. Build topology?
-
@@ -29244,22 +28965,22 @@ p, li { white-space: pre-wrap; }
cellhd file %1 does not exist
-
Groups not yet supported
-
Format not supported
-
Cannot read data
-
@@ -29323,7 +29044,7 @@ p, li { white-space: pre-wrap; }
Select the extent by dragging on canvas
or change the following values
-
GRASS Direct Tools
-
Direct Modules Tree
-
Direct Modules List
-
1
- 1
+
Filter
- 過濾條件
+
Direct Modules Tree
-
Direct Modules List
-
@@ -29623,60 +29344,60 @@ at line %2 column %3
Add feature
- 加入圖徵
+
Start editing failed
- 開始編輯失敗
+
Provider cannot be opened for editing
- 資料來源不能以編輯模式開啟
+
Stop editing
- 結束編輯
+
Do you want to save the changes to layer %1?
- 您想將改變的內容儲存至圖層 %1?
+
Error
- 錯誤
+
Problems during roll back
- 資料復原時發生問題
+
Commit errors
-
Could not commit changes to layer %1
-
Errors: %1
-
Show more
-
@@ -29684,67 +29405,65 @@ at line %2 column %3
Browse
- 瀏覽
+
Layer name
- 圖層名稱
+
Type
-
Provider
-
Datasource
- 資料來源
+
none
-
Select file to replace '%1'
-
Please select exactly one file.
-
Select new directory of selected files
-
All files (*)
-
Unhandled layer will be lost.
-
There are still %n unhandled layer(s), that will be lost if you closed now.
unhandled layers
-
-
+
@@ -29752,7 +29471,7 @@ at line %2 column %3
Handle bad layers
-
@@ -29760,12 +29479,12 @@ at line %2 column %3
Handle bad layers
-
%1 of %2 bad layers were not fixable.
-
@@ -29773,7 +29492,7 @@ at line %2 column %3
QGIS Help
- QGIS說明
+
@@ -29786,7 +29505,7 @@ at line %2 column %3
about:blank
- 關於：空白
+
@@ -29794,17 +29513,17 @@ at line %2 column %3
HTML annotation
-
Delete
- 刪除
+
html
-
@@ -29874,9 +29593,7 @@ at line %2 column %3
Network timed out after %n second(s) of inactivity.
This may be a problem in your network connection or at the WMS server.
inactivity timeout
-
-
+
@@ -29884,12 +29601,12 @@ This may be a problem in your network connection or at the WMS server.
Dialog
-
Distance coefficient P
-
@@ -29902,27 +29619,27 @@ This may be a problem in your network connection or at the WMS server.
Layer
- 圖層
+
FID
-
Attribute
- 屬性
+
Value
- 值
+
Expand tree.
-
...
-
Clear Results
-
Help
- 說明
+
Select identify mode
-
Mode
- 模式
+
Select view mode for raster layers
-
View
- 檢視
+
Auto open form
-
Collapse tree.
-
New results will be expanded by default.
-
Copy selected feature to clipboard.
-
Print selected HTML response.
-
@@ -29996,48 +29713,48 @@ This may be a problem in your network connection or at the WMS server.
Identify Results
- 結果
+
Feature
- 圖徵
+
Value
- 值
+
Current layer
-
Top down, stop at first
-
Top down
-
Layer selection
-
(Derived)
-
(Actions)
-
Edit feature form
-
View feature form
-
Tree
-
Graph
-
feature id
- 圖徵ID
+
Format
- 格式
+
No attributes.
-
Zoom to feature
-
Copy feature
-
Toggle feature selection
-
Copy attribute value
-
Copy feature attributes
-
Copy GetFeatureInfo request URL
-
Clear results
-
Clear highlights
-
Highlight all
-
Highlight layer
-
Activate layer
-
Layer properties...
-
Expand all
-
Collapse all
-
Attributes changed
-
Cannot print
-
Cannot print this item
-
@@ -30176,7 +29893,7 @@ This may be a problem in your network connection or at the WMS server.
Print
-
@@ -30184,7 +29901,7 @@ This may be a problem in your network connection or at the WMS server.
Loading...
-
@@ -30192,7 +29909,7 @@ This may be a problem in your network connection or at the WMS server.
Progress indication
-
@@ -30201,55 +29918,55 @@ This may be a problem in your network connection or at the WMS server.
Triangular interpolation (TIN)
-
Inverse Distance Weighting (IDW)
-
No input data for interpolation
-
Please add one or more input layers
-
Output file name invalid
-
Please enter a valid output file name
-
Break lines
-
Structure lines
-
Points
- 點
+
Save interpolated raster as...
-
@@ -30267,12 +29984,12 @@ This may be a problem in your network connection or at the WMS server.
Vector layers
-
Interpolation attribute
-
...
-
Cellsize X
-
Cellsize Y
-
X min
- X最小
+
X max
- X最大
+
Y min
- Y最小
+
Y max
- Y最大
+
Set to current extent
-
Add result to project
- 將結果加入專案
+
@@ -30955,57 +30672,57 @@ This may be a problem in your network connection or at the WMS server.
[<b>family</b>|<b>family[foundry]</b>],<br>e.g. Helvetica or Helvetica [Cronyx]
-
[<b>font style name</b>|<b>Ignore</b>],<br>e.g. Bold Condensed or Light Italic
-
double [0.0-10.0]
-
int [0-20]
- int [0-100] {0-20]?}
+
int [0-2000]
- int [0-100] {0-2000]?}
+
int<br>
-
double coord [<b>in,out</b> as 20.0-60.0,20.0-95.0]
-
In edit mode, layer's relevant labeling map tool is:<br> Defined attribute field -> <i>enabled</i><br> Defined expression -> <i>disabled</i>
-
Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1<br>Value of 0 disables the specific limit.
-
int [1-1000]
- int [0-100] {1-1000]?}
+
int [1-10000]
- int [0-100] {1-10000]?}
+
@ %1 pts (using map units)
-
@ %1 pts (using map units, BUFFER IN MILLIMETERS)
-
(BUFFER NOT SHOWN, in map units)
-
圖層標記設定
- Label this layer with
標記此圖層使用
@@ -31151,22 +30868,22 @@ This may be a problem in your network connection or at the WMS server.
...
...
@@ -31222,7 +30939,7 @@ This may be a problem in your network connection or at the WMS server.
多行
- Automated placement settings (apply to all layers)
自動位置設定(套用至所有圖層)
@@ -31252,7 +30969,7 @@ This may be a problem in your network connection or at the WMS server.
Rendering
繪圖
@@ -31340,7 +31057,7 @@ This may be a problem in your network connection or at the WMS server.
Alignment
對齊
@@ -31377,7 +31094,7 @@ This may be a problem in your network connection or at the WMS server.
重複
- Discourage labels from covering features
當覆蓋圖徵阻止標記
@@ -31472,82 +31189,82 @@ This may be a problem in your network connection or at the WMS server.
輪廓
- Labels will not show if larger than this on screen
如果大於此螢幕，標記將不顯示
- px
px
- Data defined
資料定義
- X
X
- Y
Y
- Coordinate
坐標
- Preserve data rotation values
保留資料旋轉值
- horizontal
水平
- vertical
垂直
- Label options
標記選項
- Value < 0 represents a scale closer than 1:1, e.g. -10 = 10:1.<br>Value of 0 disables the specific limit.
值 < 0代表比1:1更接近的比例, e.g. -10 = 10:1<br>值0表示禁止特定的限制。
- Maximum
最大值
- Pixel size-based visibility (labels in map units)
圖素大小為基準的顯示(以地圖單位標記)
- Labels will not show if smaller than this on screen
如果大於此螢幕，標記將不顯示
- Minimum
最小值
@@ -31557,7 +31274,7 @@ This may be a problem in your network connection or at the WMS server.
<
- Scale-based visibility
依比例顯示
@@ -31595,17 +31312,17 @@ This may be a problem in your network connection or at the WMS server.
反方向
- Priority
優先權
- Low
低
- High
高
@@ -31758,7 +31475,7 @@ This may be a problem in your network connection or at the WMS server.
Rotation
旋轉
@@ -31810,17 +31527,17 @@ This may be a problem in your network connection or at the WMS server.
距離
- outside
外面
- inside
裡面
- Maximum angle between curved characters
曲線特性內的最大角度
@@ -31926,62 +31643,62 @@ This may be a problem in your network connection or at the WMS server.
符號單位
- Merge connected lines to avoid duplicate labels
合併已結線以避免重複標記
- Label every part of multi-part features
標記多部份圖徵的每個部份
- Feature options
圖徵選項
- Suppress labeling of features smaller than
禁止標記圖徵，當小於
- mm
mm
- Show all labels for this layer (including colliding labels)
顯示此圖層的所有標記(包括衝突標記)
- Show upside-down labels
顯示上下顛倒的標記
- never
從不
- when rotation defined
當旋轉已定義
- always
總是
- Limit number of features to be labeled to
限制圖徵標記的數量
- Number of features sent to labeling engine, though not all may be labeled
圖徵的數量過多，標記引擎可能無法全部處理
@@ -31991,17 +31708,17 @@ This may be a problem in your network connection or at the WMS server.
位置
- Uncheck to write labeling engine derived rotation on pin and NULL on unpin
-
- Always show
總是顯示
- Show label
顯示標記
@@ -32017,15 +31734,15 @@ This may be a problem in your network connection or at the WMS server.
QgsLayerTreeModel
- Double-click to view legend
-
- following %1 items
not displayed
-
@@ -32079,12 +31796,12 @@ not displayed
QgsLegendModel
- Group
群組
- No Legend Available
沒有圖例可使用
@@ -32129,23 +31846,23 @@ not displayed
Styles related to the layer
-
Other styles on the database
-
Cancel
- 取消
+
Load Style
- 載入樣式
+
@@ -32153,7 +31870,7 @@ not displayed
Select all
- 全選
+
You should select at least one connection from list.
-
XML files (*.xml *.XML)
-
Cannot write file %1:
%2.
-
Loading connections
- 載入連線
+
Cannot read file %1:
%2.
-
Parse error at line %1, column %2:
%3
-
The file is not an WMS connections exchange file.
-
The file is not an WFS connections exchange file.
-
The file is not an WCS connections exchange file.
-
The file is not an PostGIS connections exchange file.
-
The file is not an MSSQL connections exchange file.
-
The file is not an Oracle connections exchange file.
-
The file is not an %1 connections exchange file.
-
Connection with name '%1' already exists. Overwrite?
-
@@ -32309,18 +32026,18 @@ not displayed
QgsMapCanvas
- canvas
畫面
- Rendering
繪圖
- Canvas refresh: %1 ms
畫面重新整理: %1 ms
@@ -32379,83 +32096,83 @@ not displayed
Error: qgis element could not be found in %1
-
Loading style file %1 failed because:
%2
-
Could not save symbology because:
%1
-
The directory containing your dataset needs to be writable!
-
Style not found in database
-
Created default style file as %1
-
ERROR: Failed to created default style file as %1. Check file permissions and retry.
-
User database could not be opened.
-
The style table could not be created.
-
The style %1 was saved to database
-
The style %1 was updated in the database.
-
The style %1 could not be updated in the database.
-
The style %1 could not be inserted into database.
-
ERROR: Failed to created SLD style file as %1. Check file permissions and retry.
-
Unable to open file %1
-
@@ -32464,13 +32181,13 @@ not displayed
Transform error caught: %1
-
CRS
-
@@ -32478,51 +32195,51 @@ not displayed
add feature
-
Layer cannot be added to
-
The data provider for this layer does not support the addition of features.
-
Wrong editing tool
-
Cannot apply the 'capture point' tool on this vector layer
-
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Cannot apply the 'capture line' tool on this vector layer
-
Cannot apply the 'capture polygon' tool on this vector layer
-
Error
- 錯誤
+
Cannot add feature. Unknown WKB type
-
The feature could not be added because removing the polygon intersections would change the geometry type
-
An error was reported during intersection removal
-
The feature cannot be added because it's geometry is empty
-
The feature cannot be added because it's geometry collapsed due to intersection avoidance
-
@@ -32566,53 +32283,53 @@ not displayed
No feature selected. Please select a feature with the selection tool or in the attribute table
-
Several features are selected. Please select only one feature to which an part should be added.
-
Part added
-
Could not add part. %1
-
Coordinate transform error. Cannot transform the point to the layers coordinate system
-
Selected feature is not multi part.
-
New part's geometry is not valid.
-
New polygon ring not disjoint with existing polygons.
-
Several features are selected. Please select only one feature to which an island should be added.
-
Selected geometry could not be found
-
@@ -32620,52 +32337,52 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32673,12 +32390,12 @@ not displayed
Validation started.
-
Validation finished.
-
@@ -32686,7 +32403,7 @@ not displayed
Changed properties for label
-
@@ -32694,12 +32411,12 @@ not displayed
Part of multipart feature deleted
-
Couldn't remove the selected part.
-
@@ -32707,18 +32424,18 @@ not displayed
Delete ring
-
Delete ring can only be used in a polygon layer.
-
Ring deleted
-
@@ -32726,12 +32443,12 @@ not displayed
No active vector layer
-
Layer not editable
- 圖層不可編輯
+
@@ -32739,27 +32456,27 @@ not displayed
No active vector layer
-
To run an action, you must choose a vector layer by clicking on its name in the legend
-
No actions available
-
The active vector layer has no defined actions
-
No features at this position found.
-
@@ -32767,52 +32484,52 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Ring added and filled
-
A problem with geometry type occured
-
The inserted Ring is not closed
-
The inserted Ring is not a valid geometry
-
The inserted Ring crosses existing rings
-
The inserted Ring is not contained in a feature
-
An unknown error occured
-
Error, could not add ring
-
@@ -32820,38 +32537,38 @@ not displayed
All (%1)
-
No active layer. To identify features, you must choose an active layer.
-
Identifying on %1...
-
Identifying done.
-
(clicked coordinate)
-
feature id
- 圖徵ID
+
new feature
-
firstX
attributes get sorted; translation for lastX should be lexically larger than this one
-
firstY
-
lastX
attributes get sorted; translation for firstX should be lexically smaller than this one
-
lastY
-
Perimeter
-
no data
-
Error
- 錯誤
+
Identify error
-
@@ -32912,7 +32629,7 @@ not displayed
No features at this position found.
-
@@ -32928,7 +32645,7 @@ not displayed
Moved label
-
@@ -32936,7 +32653,7 @@ not displayed
could not snap to a segment on the current layer.
-
Offset curve
-
Offset:
-
Geometry error
-
Creating offset geometry failed
-
@@ -32972,12 +32689,12 @@ not displayed
Pinned label
-
Unpinned label
-
@@ -32985,17 +32702,17 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Reshape
-
@@ -33003,7 +32720,7 @@ not displayed
Features Rotated
-
@@ -33011,7 +32728,7 @@ not displayed
Rotated label
-
@@ -33024,7 +32741,7 @@ not displayed
No point feature was detected at the clicked position. Please click closer to the feature or enhance the search tolerance under Settings->Options->Digitizing->Serch radius for vertex edits
-
The active point layer does not have a rotation attribute
-
Hid labels
-
Showed labels
-
@@ -33060,23 +32777,23 @@ not displayed
Geometry simplified
-
Unsupported operation
-
Multipart features are not supported for simplification.
-
This feature cannot be simplified. Check if feature has enough vertices to be simplified.
-
@@ -33084,27 +32801,27 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Features split
-
No features were split
-
If there are selected features, the split tool only applies to those. If you would like to split all features under the split line, clear the selection.
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits features into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
@@ -33134,53 +32851,53 @@ not displayed
Coordinate transform error
-
Cannot transform the point to the layers coordinate system
-
Parts split
-
No parts were split
-
If there are selected parts, the split tool only applies to those. If you would like to split all parts under the split line, clear the selection.
-
No part split done
-
An error occured during splitting.
-
Cut edges detected. Make sure the line splits parts into multiple parts.
-
The geometry is invalid. Please repair before trying to split it.
-
Split error
-
@@ -33188,22 +32905,22 @@ not displayed
Adjust scaling range
-
Maximum scale:
-
Minimum scale:
-
Scale only within the following map unit scale range:
-
@@ -33213,39 +32930,39 @@ not displayed
Millimeter
- 公釐
+
Map unit
- 地圖單位
+
Interval
- 區間
+
Line offset
-
Placement
- 位置
+
'vertex'|'lastvertex'|'firstvertex'|'centerpoint'
-
Offset along line
-
@@ -33258,12 +32975,12 @@ not displayed
Total
-
Segments
- 線段
+
@@ -33271,67 +32988,67 @@ not displayed
&New
- 新增(&N)
+
The calculations are based on:
-
Project CRS transformation is turned off.
-
Canvas units setting is taken from project properties setting (%1).
-
Ellipsoidal calculation is not possible, as project CRS is undefined.
-
Measure (OTF off)
-
Project CRS transformation is turned on and ellipsoidal calculation is selected.
-
The coordinates are transformed to the chosen ellipsoid (%1), and the result is in meters
-
Project CRS transformation is turned on but ellipsoidal calculation is not selected.
-
The canvas units setting is taken from the project CRS (%1).
-
Measure (OTF on)
-
Finally, the value is converted from %1 to %2.
-
Segments [%1]
-
@@ -33339,12 +33056,12 @@ not displayed
Incorrect measure results
-
<p>This map is defined with a geographic coordinate system (latitude/longitude) but the map extents suggests that it is actually a projected coordinate system (e.g., Mercator). If so, the results from line or area measurements will be incorrect.</p><p>To fix this, explicitly set an appropriate map coordinate system using the <tt>Settings:Project Properties</tt> menu.
-
@@ -33411,57 +33128,57 @@ not displayed
Skip attribute
-
Id
- Id
+
Merge
-
Feature %1
-
Minimum
- 最小值
+
Maximum
- 最大值
+
Median
- 中位數
+
Sum
- 總合
+
Concatenation
-
Mean
-
Skipped
-
@@ -33469,17 +33186,17 @@ not displayed
Merge feature attributes
-
Take attributes from selected feature
-
Remove feature from selection
-
@@ -33487,25 +33204,23 @@ not displayed
Remaining messages
-
Close all
-
Close
- 關閉
+
%n more
unread messages
-
-
+
@@ -33513,38 +33228,38 @@ not displayed
QGIS Log
-
No messages.
-
%1 message(s) logged.
-
General
- 一般
+
Timestamp
-
Message
- 訊息
+
Level
-
@@ -33557,7 +33272,7 @@ not displayed
Don't show this message again
- 不是再顯示此訊息
+
@@ -33565,48 +33280,46 @@ not displayed
Show non-spatial tables
-
Edit...
- 編輯...
+
Delete
- 刪除
+
%1: Not a vector layer!
- %1: 不是一個向量圖層！
+
%1: OK!
-
Import to MSSQL database
-
Failed to import some layers!
- 匯入一些圖層失敗！
-
-
+
Import was successful.
- 已成功匯入。
+
@@ -33614,23 +33327,23 @@ not displayed
Saving passwords
- 儲存密碼鄉
+
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
- 儲存連線
+
Should the existing connection %1 be overwritten?
-
Test connection
- 測試連線
+
Connection failed - Host name hasn't been specified.
+ Connection failed - Host name hasn't been specified.
-
Connection failed - Database name hasn't been specified.
+ Connection failed - Database name hasn't been specified.
-
Connection to %1 was successful
-
@@ -33665,82 +33378,82 @@ not displayed
Create a New MSSQL connection
-
Connection Information
- 連接資訊
+
Name
- 名稱
+
Provider/DSN
-
Host
- 主機
+
Database
- 資料庫
+
Username
- 使用者名稱
+
Password
- 密碼
+
Name of the new connection
- 新連接的名稱
+
Trusted Connection
-
Save Username
- 儲存帳號
+
&Test Connect
- 測試連線(&T)
+
Save Password
- 儲存密碼
+
Only look in the geometry_columns metadata table
-
Also list tables with no geometry
- 一併列出沒有幾何欄位的表格
+
Use estimated table parameters
-
@@ -33748,72 +33461,72 @@ not displayed
8 Bytes integer
-
4 Bytes integer
-
2 Bytes integer
-
1 Bytes integer
-
Decimal number (numeric)
- 十進位數 (numeric)
+
Decimal number (decimal)
- 十進位數 (decimal)
+
Decimal number (real)
-
Decimal number (double)
- 十進位數 (double)
+
Text, fixed length (char)
- 文字, 長度固定(字元)
+
Text, limited variable length (varchar)
- 文字，有限的可變長度(varchar)
+
Text, fixed length unicode (nchar)
-
Text, limited variable length unicode (nvarchar)
-
Text, unlimited length (text)
- 文字, 長度不限(文字)
+
Text, unlimited length unicode (ntext)
-
@@ -33821,7 +33534,7 @@ not displayed
New Connection...
- 新增連線...
+
@@ -33829,12 +33542,12 @@ not displayed
%1 as %2 in %3
-
as geometryless table
-
@@ -33852,24 +33565,24 @@ not displayed
&Set Filter
- 設定過濾(&S)
+
Set Filter
-
Wildcard
- 萬用字元
+
RegExp
- 正規表示式
+
Schema
- 架構
+
Table
- 表格
+
Type
-
Geometry column
- 幾何欄位
+
Primary key column
- 主鍵(PK)欄位
+
SRID
-
Sql
- Sql
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- 確認刪除
+
Load connections
- 載入連線
+
XML files (*.xml *XML)
- XML 檔案 (*.xml *.XML)
+
Select Table
- 選擇表格
+
You must select a table in order to add a layer.
- 您一定要選取一個格表加入圖層中。
+
Schema
- 架構
+
Table
- 表格
+
Type
-
Geometry column
- 幾何欄位
+
SRID
-
Primary key column
- 主鍵(PK)欄位
+
Select at id
- 用id選擇
+
Sql
- Sql
+
Select...
- 選擇...
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Enter...
- 輸入...
+
Point
- 點
+
Multipoint
- Multipoint
+
Line
- 線
+
Multiline
-
Polygon
- 多邊形
+
Multipolygon
- Multipolygon
+
No Geometry
- 無幾何欄位
+
Unknown Geometry
- 未知幾何欄位
+
@@ -34087,42 +33800,42 @@ not displayed
Not set
- 未設定
+
No enhancement
- 無增強
+
Stretch to MinMax
- 延伸至最大/最小
+
Stretch and clip to MinMax
- 延伸與修剪至最大/最小
+
Clip to MinMax
- 修剪至最大/最小
+
Red
- 紅
+
Green
- 綠
+
Blue
- 藍
+
@@ -34130,7 +33843,7 @@ not displayed
Form
- 表單
+
Network request %1 timed out
-
Network
- 網路
+
@@ -34180,7 +33893,7 @@ enhancement
Cannot find boundary in multipart content type
-
@@ -34188,63 +33901,63 @@ enhancement
Create a new %1 connection
-
all
-
off
-
QGIS
- QGIS
+
UMN
-
GeoServer
-
Ignore GetCoverage URI reported in capabilities
-
Ignore axis orientation
-
Save connection
- 儲存連線
+
Should the existing connection %1 be overwritten?
-
Saving passwords
- 儲存密碼鄉
+
WARNING: You have entered a password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
Note: giving the password is optional. It will be requested interactivly, when needed.
-
@@ -34342,7 +34055,7 @@ http://gis.sinica.edu.tw/tileserver/wmts
Test connection
- 測試連線
+
Connection to %1 was successful
-
Save connection
- 儲存連線
+
Should the existing connection %1 be overwritten?
-
@@ -34373,62 +34086,62 @@ Extended error information:
Create a New OGR Database connection
-
Connection Information
- 連接資訊
+
Type
-
Name
- 名稱
+
Name of the new connection
- 新連接的名稱
+
Host
- 主機
+
Database
- 資料庫
+
Port
-
Username
- 使用者名稱
+
Password
- 密碼
+
Save Password
- 儲存密碼
+
&Test Connect
- 測試連線(&T)
+
@@ -34451,12 +34164,12 @@ Extended error information:
New SpatiaLite Database File
-
SpatiaLite
- SpatiaLite
+
SpatiaLite Database
-
Unable to open the database
-
Error
- 錯誤
+
Failed to load SRIDS: %1
-
@
- @
+
Registered new database!
-
Unable to open the database: %1
-
Error Creating SpatiaLite Table
-
Failed to create the SpatiaLite table %1. The database returned:
%2
-
Error Creating Geometry Column
-
Failed to create the geometry column. The database returned:
%1
-
Error Creating Spatial Index
-
Failed to create the spatial index. The database returned:
%1
-
Invalid Layer
- 無效的圖層
+
%1 is an invalid layer and cannot be loaded.
- %1是一個無效的圖層，無法載入。
+
@@ -34841,17 +34554,17 @@ Extended error information:
No query has been specified.
-
There is already a pending request for data.
-
Cannot open output file: %1
-
@@ -34859,47 +34572,47 @@ Extended error information:
Download OpenStreetMap data
-
Extent
- 範圍
+
From map canvas
- 從地圖畫面
+
From layer
-
Manual
- 手動
+
Output file
- 輸出檔案
+
...
-
OpenStreetMap files (*.osm)
-
Download error
-
OpenStreetMap download
-
Could not transform canvas extent.
-
Could not transform layer extent.
-
Would you like to abort download?
-
Download failed.
%1
-
Download has been successful.
-
@@ -34942,95 +34655,95 @@ Extended error information:
Export OpenStreetMap topology to SpatiaLite
-
Input DB file
-
...
-
Export type
-
Points (nodes)
-
Polylines (open ways)
-
Polygons (closed ways)
-
Output layer name
-
Exported tags
-
Load from DB
-
&Load into canvas when finished
- 處理完成後載入QGIS地圖中(&L)
+
Tag
-
Count
-
SQLite databases (*.db)
-
Unable to open database:
%1
-
OpenStreetMap export
-
Export has been successful.
-
Failed to export OSM data:
%1
-
@@ -35038,66 +34751,66 @@ Extended error information:
OpenStreetMap Import
-
Input XML file (.osm)
-
...
-
Output SpatiaLite DB file
-
Create connection (SpatiaLite) after import
-
Connection name
-
OpenStreetMap files (*.osm)
-
SQLite databases (*.db)
-
OpenStreetMap import
-
Output database file exists already. Overwrite?
-
Failed to import OSM data:
%1
-
Import has been successful.
-
@@ -35105,12 +34818,12 @@ Extended error information:
WMS Password for %1
- %1的WMS密碼
+
Password
- 密碼
+
@@ -35118,12 +34831,12 @@ Extended error information:
Edit...
- 編輯...
+
Delete
- 刪除
+
@@ -35131,7 +34844,7 @@ Extended error information:
New Connection...
- 新增連線...
+
@@ -35139,96 +34852,94 @@ Extended error information:
Add Layer(s) from a %1 Server
-
&Add
- 加入 (&A)
+
Add selected layers to map
- 加入選取的圖層至QGIS地圖中
+
Always cache
-
Prefer cache
-
Prefer network
-
Always network
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- 確認刪除
+
Load connections
- 載入連線
+
XML files (*.xml *XML)
- XML 檔案 (*.xml *.XML)
+
Coordinate Reference System (%n available)
crs count
-
- 坐標參考系統 (%n可使用)
-
+
Coordinate Reference System
- 坐標參考系統
+
Could not understand the response:
%1
-
WMS proxies
- WMS Proxy伺服器
+
Several WMS servers have been added to the server list. Note that if you access the internet via a web proxy, you will need to set the proxy settings in the QGIS options dialog.
- 已加入數個WMS伺服器至您的伺服器清單中。注意如果您需透過Proxy伺服器連線，您必須先在QGIS選項中設定prxoy主機資料。
+
parse error at row %1, column %2: %3
- 在列%1,欄%2:%3 解析錯誤
+
network error: %1
- 網路錯誤: %1
+
@@ -35383,7 +35094,7 @@ Prefer network: default value; load from the network if the cached entry is olde
Always network: always load from network and do not check if the cache has a valid entry (similar to the "Reload" feature in browsers)
-
Could not open the spatialite database
-
Unable to initialize SpatialMetadata:
-
Could not create a new database
-
Unable to activate FOREIGN_KEY constraints
-
Unknown data type %1
-
QGIS wkbType %1 not supported
-
Could not open the spatialite logging database
-
@@ -35554,37 +35265,37 @@ Always network: always load from network and do not check if the cache has a val
%v / %m features copied
-
%v / %m features processed
-
%v / %m fields added
-
%v / %m features added
-
%v / %m features removed
-
%v / %m feature updates
-
%v / %m feature geometry updates
-
@@ -35602,7 +35313,7 @@ Always network: always load from network and do not check if the cache has a val
All files
-
OGR
- OGR
+
OGR error creating wkb for feature %1: %2
-
type %1 for attribute %2 not found
-
OGR error creating feature %1: %2
-
type %1 for field %2 not found
-
OGR error creating field %1: %2
-
OGR error deleting field %1: %2
-
Deleting fields is not supported prior to GDAL 1.9.0
-
OGR error on feature %1: id too large
-
Feature %1 for attribute update not found.
-
Field %1 of feature %2 doesn't exist.
-
Type %1 of attribute %2 of feature %3 unknown.
-
OGR error setting feature %1: %2
-
OGR error syncing to disk: %1
-
OGR error changing geometry: feature %1 not found
-
OGR error creating geometry for feature %1: %2
-
OGR error in feature %1: geometry is null
-
OGR error setting geometry of feature %1: %2
-
Possible corruption after REPACK detected. %1 still exists. This may point to a permission or locking problem of the original DBF.
-
Original layer could not be reopened.
-
Original datasource could not be reopened.
-
OGR error deleting feature %1: %2
-
Shapefiles without attribute are considered read-only.
-
@@ -35868,51 +35579,51 @@ Always network: always load from network and do not check if the cache has a val
Open raster
-
Raster file:
-
...
-
Save raster as:
-
Choose a name of the raster
-
Error
- 錯誤
+
The selected file is not a valid raster file.
-
Choose a name for the modified raster
-
-modified
Georeferencer:QgsOpenRasterDialog.cpp - used to modify a user given file name
-
@@ -35920,22 +35631,22 @@ Always network: always load from network and do not check if the cache has a val
Open an OGR Supported Vector Layer
-
Open Directory
-
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- 確認刪除
+
Add vector layer
- 加入向量圖層
+
No database selected.
-
Password for
-
Please enter your password:
- 請輸入您的密碼:
+
No protocol URI entered.
-
No layers selected.
-
No directory selected.
-
@@ -36025,12 +35736,12 @@ Always network: always load from network and do not check if the cache has a val
URI
-
Source
- 源
+
Options Dialog Template
-
GroupBox
-
@@ -36081,17 +35792,17 @@ Always network: always load from network and do not check if the cache has a val
Identify highlight color
-
not present
-
System value: %1
-
Cumulative pixel count cut
-
Minimum / maximum
-
Mean +/- standard deviation
-
Select grid color
-
Solid
- 實線
+
Dots
-
Crosses
- 十字
+
- Detected active locale on your system: %1
偵測目前您的系統使用的語言區域值為:%1
- To vertex
自動接合 轉折點
- To segment
自動接合 線段
- To vertex and segment
自動接合 轉折點與線段
- map units
地圖單位
- pixels
像素
- Semi transparent circle
半透明圓圈
- Cross
十字形
- None
不透明
- QGIS files
- QGIS檔案
+
- Off
- 關
-
-
- QGIS
- QGIS
+
QGIS
+
+
+ GEOS
- GEOS
+
- Round
-
- Mitre
-
- Bevel
-
- Save default project
儲存預設專案
- You must set a default project
-
- Current project saved as default
-
- Error saving current project as default
-
- Choose a directory to store project template files
-
Show features visible on map
-
- Choose project file to open at launch
-
- Create Options - %1 Driver
-
- Create Options - pyramids
-
- Restore UI defaults
-
- Are you sure to reset the UI to default (needs restart)?
-
- Overwrite
- 覆蓋
+
- If Undefined
-
- Unset
-
- Prepend
-
- Append
-
- Choose a directory
選擇資料夾
- Enter scale
輸入比例
- Scale denominator
-
- Load scales
-
- XML files (*.xml *.XML)
-
- Save scales
-
- No Stretch
無延伸(No Stretch)
- Stretch To MinMax
延伸至最大/最小
- Stretch And Clip To MinMax
延伸與修剪至最大/最小
- Clip To MinMax
修剪至最大/最小
None / Planimetric
-
@@ -36432,7 +36143,7 @@ Always network: always load from network and do not check if the cache has a val
General
一般
@@ -36615,7 +36326,7 @@ Always network: always load from network and do not check if the cache has a val
...
...
@@ -36731,7 +36442,7 @@ Always network: always load from network and do not check if the cache has a val
Remove
移除
@@ -36739,7 +36450,7 @@ Always network: always load from network and do not check if the cache has a val
Add
加入
@@ -36999,22 +36710,7 @@ Always network: always load from network and do not check if the cache has a val
最小線段/輪廓寬度(毫米)。
- Grid and guide defaults
-
-
- Grid spacing
-
-
- px
- px
-
-
- Suppress attribute form pop-up after feature creation
圖徵建立後避免彈出屬性編輯
@@ -37311,18 +37007,22 @@ Always network: always load from network and do not check if the cache has a val
色彩...
+ Grid defaults
- 格線預設
+ 格線預設
+ Spacing
- 間距
+ 間距
mm
mm
@@ -37343,370 +37043,372 @@ Always network: always load from network and do not check if the cache has a val
Snap tolerance
自動接合容許值
+ Guide defaults
- 導引預設
+ 導引預設
- Feature creation
圖徵建立
- Validate geometries
驗證幾何圖形
- Reuse last entered attribute values
重新使用最後一個輸入的屬性值
- Rubberband
數化線(Rubberband)
- Line color
線條色彩
- Line width in pixels
線條寬度(像素)
- Line width
線寬
- Snapping
自動接合(Snapping)
- Default snap mode
預設接合模式
- Default snapping tolerance
預設接合容許範圍
- Search radius for vertex edits
編輯轉控點的搜尋半徑
- map units
地圖單位
pixels
像素
- Open snapping options in a dock window (QGIS restart required)
在停駐視窗中開啟自動接合選項(QGIS需要重新啟動)
- Vertex markers
轉折點標誌
- Marker style
圖示樣式
- Marker size
圖示大小
- Show markers only for selected features
僅在選取圖徵時顯示圖示
- Curve offset tool
曲線偏移工具
- Miter limit
-
- Join style
- 接點樣式
+
- Quadrant segments
象限段數
- GDAL driver options
GDAL驅動程式選項
- Edit Pyramids Options
編輯金字塔快取選項
- Edit Create Options
編輯建立選項
- GDAL drivers
GDAL驅動程式
- In some cases more than one GDAL driver can be used to load the same raster format. Use the list below to specify which to use.
在某些情況下可以使用多個GDAL驅動程式載入相同的影像(Raster)格式。使用下列清單指定那些要使用。
- Name
名稱
- ext
-
- Flags
-
- Description
描述
- CRS for new layers
新增圖層的CRS
- Select...
選擇...
- Use &project CRS
使用專案CRS(&p)
- Prompt for &CRS
提示選取 &CRS
- Use default CRS displa&yed below
使用以下預設的CRS(&y)
- When a new layer is created, or when a layer is loaded that has no CRS
當建立一個新圖層或載入一個圖層時無指定CRS
- Default CRS for new projects
新增專案的預設CRS
- Automatically enable 'on the fly' reprojection if CRS of a new added layer differ from CRS of layer(s) already present. CRS of present layer(s) will be used.
如果圖層之間有不同的CRS，自動啟用即時坐標投影轉換。將會使用目前圖層的CRS。
- Automatically enable 'on the fly' reprojection if layers have different CRS
如果圖層之間有不同的CRS，自動啟用即時坐標投影轉換
- Always start new projects with this CRS
總是在新專案開始時使用此CRS
- Enable 'on the &fly' reprojection by default
預設開啟即時坐標投影轉換(&f)
- Don't enable 'on the fly' reprojection
不啟用'即時'坐標投影轉換
- Default datum transformations
預設的大地轉換
- Source CRS
來源CRS
- Destination CRS
目的CRS
- Source datum transform
來源大地轉換
- Destination datum transform
目的大地轉換
- Ask for datum transformation when no default is defined
若無預設的定義，請詢問大地轉換方式
- Override system locale
取代Windows系統的語言區域設定
- Locale to use instead
設定語言區域為
- <b>Note:</b> Enabling / changing overide on local requires an application restart
<b>注意:</b> 使用 / 改變 語言區域設定需要重新啟動程式
- Additional Info
參考資訊
- Detected active locale on your system:
偵測目前您的系統使用的語言區域值為:
- WMS search address
WMS搜尋網址
- Timeout for network requests (ms)
發出網路需求的等待時間(ms)
- Default expiration period for WMS-C/WMTS tiles (hours)
預設WMS-C/WMTS圖磚的過期時間(小時)
- Max retry in case of tile request errors
報告錯誤的最大重新嘗試數
- User-Agent
User-Agent
- Cache settings
快取設定
- Directory
資料夾
- Size [KiB]
大小[KiB]
- Clear
清除
- Use proxy for web access
存取網頁使用Proxy伺服器
- Host
主機
- Port
連接埠號
- User
使用者帳號
- Leave this blank if no proxy username / password are required
若Proxy不須帳號/密碼，請不用填寫
- Password
密碼
- Proxy type
Proxy類別
- Exclude URLs (starting with)
例外的網址(開始為)
@@ -37724,7 +37426,7 @@ Always network: always load from network and do not check if the cache has a val
Missing some of the .ui template objects:
-
@@ -37732,17 +37434,17 @@ Missing some of the .ui template objects:
Retrieving tables of %1...
-
Scanning column %1.%2.%3...
-
Table retrieval finished.
-
@@ -37750,7 +37452,7 @@ Missing some of the .ui template objects:
Connection to database failed
- 連結資料庫失敗
+
Oracle
-
SQL:%1
error:%2
-
Database connection was successful, but the accessible tables could not be determined.
- 資料庫連線已成功，但是不能決定可存取的表格。
+
Unable to get list of spatially enabled tables from the database
- 無法取得資料庫中具有空間資料的表格清單
+
Unsupported geometry type %1 in %2.%3.%4 ignored
-
View %1.%2 doesn't have integer columns for use as keys.
-
Point
- 點
+
Multipoint
- Multipoint
+
Line
- 線
+
Multiline
-
Polygon
- 多邊形
+
Multipolygon
- Multipolygon
+
No Geometry
- 無幾何欄位
+
Unknown Geometry
- 未知幾何欄位
+
@@ -37846,63 +37548,61 @@ error:%2
Edit...
- 編輯...
+
Delete
- 刪除
+
Refresh
- 重新整理
+
Copying features...
-
Abort
- 放棄
+
Import layer
-
%1: Not a vector layer!
- %1: 不是一個向量圖層！
+
%1: OK!
-
Import to Oracle database
-
Failed to import some layers!
- 匯入一些圖層失敗！
-
-
+
Import was successful.
- 已成功匯入。
+
@@ -37912,12 +37612,12 @@ error:%2
Delete layer
- 刪除圖層
+
Layer deleted successfully.
- 圖層刪除成功。
+
@@ -37925,41 +37625,41 @@ error:%2
Saving passwords
- 儲存密碼鄉
+
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Save connection
- 儲存連線
+
Should the existing connection %1 be overwritten?
-
Test connection
- 測試連線
+
Connection to %1 was successful
-
Connection failed - Check settings and try again.
-
@@ -37967,128 +37667,128 @@ error:%2
Create a New Oracle connection
-
Connection Information
- 連接資訊
+
Password
- 密碼
+
Save Username
- 儲存帳號
+
Username
- 使用者名稱
+
Name of the new connection
- 新連接的名稱
+
Database
- 資料庫
+
Name
- 名稱
+
Restrict the displayed tables to those that are in the all_sdo_geom_metadata table
-
When searching for spatial tables restrict the search to tables that are owned by the user.
-
<html><head/><body><p>When searching for spatial tables restrict the search to tables that are owned by the user.</p></body></html>
-
Only list the existing geometry types and don't offer to add others.
-
Only existing geometry types
-
<html><head/><body><p>Restricts the displayed tables to those that are in the all_sdo_geom_metadata view. This can speed up the initial display of spatial tables.</p></body></html>
-
Only look in meta data table
-
Only look for user's tables
-
Also list tables with no geometry
- 一併列出沒有幾何欄位的表格
+
Port
-
1521
- 1521
+
&Test Connect
- 測試連線(&T)
+
Save Password
- 儲存密碼
+
Host
- 主機
+
Use estimated table statistics for the layer metadata.
- 為了圖層詮釋資料，將使用已估計表格的統計資料。
+
<html><head/><body><p>When the layer is setup various metadata is required for the Oracle table. This includes information such as the table row count, geometry type and spatial extents of the data in the geometry column. If the table contains a large number of rows determining this metadata is time consuming.</p><p>By activating this option the following fast table metadata operations are done:</p><p>1) Row count is determined from all_tables.num_rows.</p><p>2) Table extents are always determined with the SDO_TUNE.EXTENTS_OF function even if a layer filter is applied.</p><p>3) The table geometry is determined from the first 100 non-null geometry rows in the table.</p></body></html>
-
Use estimated table metadata
- 使用已估計表格的詮釋資料
+
@@ -38096,12 +37796,12 @@ error:%2
%1 as %2 in %3
-
as geometryless table
-
@@ -38152,22 +37852,22 @@ error:%2
Text, fixed length (char)
- 文字, 長度固定(字元)
+
Text, limited variable length (varchar2)
-
Text, unlimited length (long)
-
FAILURE: Field %1 not found.
-
Oracle
-
Read attempt on an invalid oracle data source
-
Loading comment for table %1.%2 failed [%3]
-
Loading comment for columns of table %1.%2 failed [%3]
-
Other spatial field %1.%2.%3 ignored
-
Loading field types for table %1.%2 failed [%3]
-
Invalid spatial index %1 on column %2.%3.%4 found - expect poor performance.
-
No spatial index on column %1.%2.%3 found - expect poor performance.
-
Probing for spatial index on column %1.%2.%3 failed [%4]
-
Retrieving fields from '%1' failed [%2]
-
The custom query is not a select query.
-
Primary key field %1 not found in %2
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
No key field for query given.
-
Evaluation of default value failed
-
Could not start transaction
-
Could not prepare insert statement
-
Could not insert feature %1
-
Could not commit transaction
-
Oracle error while adding features: %1
-
Could not rollback transaction
-
Deletion of feature %1 failed
-
Oracle error while deleting features: %1
-
Adding attribute %1 failed
-
Setting comment on %1 failed
-
Oracle error while adding attributes: %1
-
Could not reload fields.
-
Dropping column %1 failed
-
Oracle error while deleting attributes: %1
-
Update of feature %1 failed
-
Oracle error while changing attributes: %1
-
Could not prepare update statement.
-
Oracle error while changing geometry values: %1
-
Could not retrieve extents: %1
SQL: %2
-
%1 has no valid geometry types.
SQL: %2
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
Could not update metadata for %1.%2.
SQL:%3
Error: %4
-
Could not insert metadata for %1.%2.
SQL:%3
Error: %4
-
Creation spatial index failed.
SQL:%1
Error: %2
-
Rebuild of spatial index failed.
SQL:%1
Error: %2
-
Could not determine table existence.
-
Table %1 could not be dropped.
-
Table %1 already exists.
-
Table creation failed.
-
Could not lookup authid %1:%2
-
Could not lookup WKT.
-
Could not determine new srid.
-
CRS not found and could not be created.
-
Could not insert metadata.
-
Drop created table %1 failed.
SQL:%2
Error: %3
-
Oracle SRID %1 not found.
-
Lookup of Oracle SRID %1 failed.
SQL:%2
Error:%3
-
Oracle error: %1
SQL: %2
Error: %3
-
Oracle error: %1
Error: %2
-
@@ -38611,7 +38311,7 @@ Error: %2
New Connection...
- 新增連線...
+
@@ -38619,32 +38319,32 @@ Error: %2
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- 確認刪除
+
Password for %1/<password>@%2
-
Please enter your password:
- 請輸入您的密碼:
+
Open failed
-
The connection to %1 failed. Please verify your connection parameters. Make sure you have the GDAL GeoRaster plugin installed.
-
@@ -38657,117 +38357,117 @@ Error: %2
&Add
- 加入 (&A)
+
&Set Filter
- 設定過濾(&S)
+
Set Filter
-
Wildcard
- 萬用字元
+
RegExp
- 正規表示式
+
All
- 全部
+
Owner
- 使用者
+
Table
- 表格
+
Type
-
Geometry column
- 幾何欄位
+
Primary key column
- 主鍵(PK)欄位
+
SRID
-
Sql
- Sql
+
Are you sure you want to remove the %1 connection and all associated settings?
-
Confirm Delete
- 確認刪除
+
Load connections
- 載入連線
+
XML files (*.xml *XML)
- XML 檔案 (*.xml *.XML)
+
Select Table
- 選擇表格
+
You must select a table in order to add a layer.
- 您一定要選取一個格表加入圖層中。
+
Stop
- 停止
+
Connect
- 連接
+
@@ -38776,12 +38476,12 @@ Error: %2
Select...
- 選擇...
+
Enter...
- 輸入...
+
@@ -38789,76 +38489,76 @@ Error: %2
Owner
- 使用者
+
Table
- 表格
+
Type
-
Geometry column
- 幾何欄位
+
SRID
-
Primary key column
- 主鍵(PK)欄位
+
Select at id
- 用id選擇
+
Sql
- Sql
+
Specify a geometry type
-
Enter a SRID
-
Select a primary key
-
Select...
- 選擇...
+
Enter...
- 輸入...
+
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
@@ -38876,22 +38576,22 @@ Error: %2
Refresh
- 重新整理
+
Copying features...
-
Abort
- 放棄
+
Import layer
-
%1: OK!
-
Import was successful.
- 已成功匯入。
+
@@ -38953,12 +38653,12 @@ Error: %2
%1 as %2 in %3
-
as geometryless table
-
@@ -38966,27 +38666,27 @@ Error: %2
Form
- 表單
+
Band
- 波段
+
Value
- 值
+
Color
- 色彩
+
Label
-
@@ -38994,12 +38694,12 @@ Error: %2
Paste Transformations
-
<b>Note: This function is not useful yet!</b>
-
Square
- 方形
+
Flat
-
Round
-
@@ -39035,17 +38735,17 @@ Error: %2
Bevel
-
Miter
-
Round
-
@@ -39112,7 +38812,7 @@ Error: %2
WARNING: You have opted to save your password. It will be stored in plain text in your project files and in your home directory on Unix-like systems, or in your user profile on Windows. If you do not want this to happen, please press the Cancel button.
-
Should the existing connection %1 be overwritten?
-
Connection to %1 was successful
-
Connection failed - Check settings and try again.
-
@@ -39203,34 +38903,34 @@ Error: %2
5432
- 5432
+
Restrict the displayed tables to those that are in the layer registries.
-
Restricts the displayed tables to those that are found in the layer registries (geometry_columns, geography_columns, topology.layer). This can speed up the initial display of spatial tables.
-
Only show layers in the layer registries
-
Restrict the search to the public schema for spatial tables not in the geometry_columns table
-
When searching for spatial tables that are not in the geometry_columns tables, restrict the search to tables that are in the public schema (for some databases this can save lots of time)
-
Don't resolve type of unrestricted columns (GEOMETRY)
-
@@ -39291,7 +38991,7 @@ Error: %2
Add PostGIS Table(s)
-
&Set Filter
- 設定過濾(&S)
+
Set Filter
-
SRID
-
Enter...
- 輸入...
+
@@ -39438,27 +39138,27 @@ Error: %2
Column
- 行
+
Data Type
-
Spatial Type
-
SRID
-
Primary Key
-
Select a primary key
-
Disable 'Fast Access to Features at ID' capability to force keeping the attribute table in memory (e.g. in case of expensive views).
-
Specify a geometry type
-
Enter a SRID
-
Form
- 表單
+
The field contains a filename for a picture. The widget will show a preview of this picture.
-
Picture size
-
Width
- 寬度
+
Height
- 高度
+
Specify the size of the preview. If you leave it set to 0, an optimal size will be estimated.
-
@@ -39541,208 +39241,208 @@ Error: %2
Select a picture
-
...
-
QgsPluginInstaller
Looking for new plugins...
-
There is a new plugin available
-
There is a plugin update available
-
QGIS Python Plugin Installer
- QGIS Python附加元件安裝
+
If you haven't cancelled the download manually, it was most likely caused by a timeout. In this case consider increasing the connection timeout value in QGIS options window.
-
Server response is 200 OK, but doesn't contain plugin metatada. This is most likely caused by a proxy or a wrong repository URL. You can configure proxy settings in QGIS options.
-
Status code:
-
The plugin exited with error status: {0}
-
Unknown error
-
Missing metadata file
-
Error reading metadata
-
Uninstall (recommended)
-
I will uninstall it later
-
Obsolete plugin:
-
QGIS has detected an obsolete plugin that masks its more recent version shipped with this copy of QGIS. This is likely due to files associated with a previous installation of QGIS. Do you want to remove the old plugin right now and unmask the more recent version?
-
Error reading repository:
-
Are you sure you want to downgrade the plugin to the latest available version? The installed one is newer!
-
Plugin installation failed
-
Plugin has disappeared
-
- The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
+ The plugin seems to have been installed but I don't know where. Probably the plugin package contained a wrong named directory.
Please search the list of installed plugins. I'm nearly sure you'll find the plugin there, but I just can't determine which of them it is. It also means that I won't be able to determine if this plugin is installed and inform you about available updates. However the plugin may work. Please contact the plugin author and submit this issue.
-
Plugin installed successfully
-
Plugin reinstalled successfully
-
Python plugin reinstalled.
You need to restart QGIS in order to reload it.
-
The plugin is not compatible with this version of QGIS. It's designed for QGIS versions:
-
The plugin depends on some components missing on your system. You need to install the following Python module in order to enable it:
-
The plugin is broken. Python said:
-
Plugin uninstall failed
-
Are you sure you want to uninstall the following plugin?
-
Warning: this plugin isn't available in any accessible repository!
-
Plugin uninstalled successfully
-
Unable to add another repository with the same URL!
-
This repository is blocked due to incompatibility with your QGIS version
-
You can't remove the official QGIS Plugin Repository. You can disable it if needed.
-
Are you sure you want to remove the following repository?
-
If you haven't cancelled the download manually, it might be caused by a timeout. In this case consider increasing the connection timeout value in QGIS options.
-
QGIS Official Plugin Repository
-
Nothing to remove! Plugin directory doesn't exist:
-
Failed to remove the directory:
-
Check permissions or remove it manually
-
QgsPluginInstallerFetchingDialog
Success
-
Resolving host name...
- 解析主機名稱...
+
Connecting...
-
Host connected. Sending request...
- 主機已連線。傳送請求中...
+
Downloading data...
- 下載資料...
+
Idle
- 閒置
+
Closing connection...
- 關閉連線中...
+
Error
- 錯誤
+
@@ -39851,7 +39551,7 @@ You need to restart QGIS in order to reload it.
The plugin seems to be invalid or have unfulfilled dependencies. It has been installed, but can't be loaded. If you really need this plugin, you can contact its author or <a href="http://lists.osgeo.org/mailman/listinfo/qgis-user">QGIS users group</a> and try to solve the problem. If not, you can just uninstall it. Here is the error message below:
-
Name
- 名稱
+
Parameters
- 參數
+
?qgis=
-
URL
-
Plugins
- 附加元件
+
sort by name
-
sort by downloads
-
sort by vote
-
sort by status
-
Only locally available
category: plugins that are only locally available
-
Reinstallable
category: plugins that are installed and available
-
Upgradeable
category: plugins that are installed and there is a newer version available
- 可升級
+
Downgradeable
category: plugins that are installed and there is an OLDER version available
-
Installable
category: plugins that are available for installation
-
This plugin is incompatible with this version of QGIS
-
Plugin designed for QGIS %1
compatible QGIS version(s)
-
This plugin requires a missing module
-
This plugin is broken
-
There is a new version available
-
This is a new plugin
-
Installed version of this plugin is higher than any version found in repository
-
This plugin is experimental
-
This plugin is deprecated
-
Category
- 類別
+
Tags
- 標籤
+
Author
-
More info
-
%1 rating vote(s)
-
%1 downloads
-
homepage
-
tracker
-
code_ repository
-
Installed version: %1 (in %2)<br/>
-
Available version: %1 (in %2)<br/>
-
changelog:<br/>%1 <br/>
-
Upgrade plugin
-
Downgrade plugin
-
Install plugin
-
Reinstall plugin
- 重新安裝附加元件
+
Reload all repositories
-
Only show plugins from selected repository
-
Clear filter
-
connected
- 已連線
+
The repository is connected
-
unavailable
-
The repository is enabled, but unavailable
-
disabled
-
The repository is disabled
-
The repository is blocked due to incompatibility with your QGIS version
-
Vote sent successfully
-
Sending vote to the plugin repository failed.
-
<h3>Upgradable plugins</h3><p>Here are <b>upgradeable plugins</b>. It means more recent versions of installed plugins are available in the repositories.</p>
-
<h3>All Plugins</h3><p>On the left you see the list of all plugins available for your QGIS, both installed and available for download. Some plugins come with your QGIS installation while most of them are made available via the plugin repositories.</p><p>You can temporarily enable or disable a plugin. To <i>enable</i> or <i>disable</i> a plugin, click its checkbox or doubleclick its name...</p><p>Plugins showing in <span style='color:red'>red</span> are not loaded because there is a problem. They are also listed on the 'Invalid' tab. Click on the plugin name to see more details, or to reinstall or uninstall this plugin.</p>
-
<h3>Installed Plugins</h3><p>Here you only see plugins <b>installed on your QGIS</b>.</p><p>Click on the name to see details. </p><p>Click the checkbox or doubleclick the name to <i>activate</i> or <i>deactivate</i> the plugin.</p><p>You can change the sorting via the context menu (right click).</p>
-
<h3>Not installed plugins</h3><p>Here you see the list of all plugins available in the repositories, but which are <b>not yet installed</b>.</p><p>Click on the name to see details.</p><p>You can change the sorting via the context menu (right click).</p><p>A plugin can be downloaded and installed by clicking on it's name, and then click the 'Install plugin' button.</p>
-
<h3>New plugins</h3><p>Here you see brand <b>new</b> plugins which can be installed.</p>
-
<h3>Invalid plugins</h3><p>Plugins in this list here are <b>broken or incompatible</b> with your version of QGIS.</p><p>Click on an individual plugin; if possible QGIS shows you more information.</p><p>The main reasons to have invalid plugins is that this plugin is not build for this version of QGIS. Maybe you can download another version from <a href="http://plugins.qgis.org">plugins.qgis.org</a>.</p><p>Another common reason is that a python plugin needs some external python libraries (dependencies). You can install them yourself, depending on your operating system. After a correct install the plugin should work.</p>
-
@@ -40221,7 +39921,7 @@ You need to restart QGIS in order to reload it.
Not installed plugins available for download
-
Not installed plugins seen for the first time
-
Broken and incompatible installed plugins
-
about:blank
- 關於：空白
+
The settings on this tab are only applicable for Python Plugins. No Python support detected, thus no settings available.
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> If this function is enabled, QGIS will inform you whenever a new plugin or plugin update is available. Otherwise, fetching repositories will be performed during opening of the Plugin Manager window.</p></body></html>
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Note:</span> Experimental plugins are generally unsuitable for production use. These plugins are in early stages of development, and should be considered 'incomplete' or 'proof of concept' tools. QGIS does not recommend installing these plugins unless you intend to use them for testing purposes.</p></body></html>
-
Show also deprecated plugins
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Droid Sans'; font-size:10pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:600;">Note:</span><span style=" font-family:'DejaVu Sans'; font-size:9pt;"> Deprecated plugins are generally unsuitable for production use. These plugins are unmaintained, and should be considered 'obsolete' tools. QGIS does not recommend installing these plugins unless you still need it and there are no other alternatives available.</span></p></body></html>
-
Reload repository contents
(useful when you uploaded a plugin there)
-
invalid PostgreSQL layer
-
invalid PostgreSQL topology layer
-
PostgreSQL layer has no primary key.
-
PostgreSQL layer has unknown primary key type.
-
Read attempt on an invalid postgresql data source
-
FAILURE: Field %1 not found.
-
unexpected formatted field type '%1' for field %2
-
Field %1 ignored, because of unsupported type %2
-
Field %1 ignored, because of unsupported type type %2
-
Duplicate field %1 found
-
PostgreSQL is still in recovery after a database crash
(or you are connected to a (read-only) slave).
Write accesses will be denied.
-
The custom query is not a select query.
-
The table has no column suitable for use as a key. QGIS requires a primary key, a PostgreSQL oid column or a ctid for tables.
-
Primary key field '%1' for view not unique.
-
Key field '%1' for view not found.
-
No key field for view given.
-
Unexpected relation type '%1'.
-
No key field for query given.
-
Could not find topology of layer %1.%2.%3
-
PostGIS error while adding features: %1
-
PostGIS error while deleting features: %1
-
PostGIS error while adding attributes: %1
-
PostGIS error while deleting attributes: %1
-
PostGIS error while changing attributes: %1
-
PostGIS error while changing geometry values: %1
-
result of extents query invalid: %1
-
Geometry type and srid for empty column %1 of %2 undefined.
-
Feature type or srid for %1 of %2 could not be determined or was not requested.
-
Editing and adding disabled for 2D+ layer (%1; %2)
-
PostgreSQL version: unknown
-
PostgreSQL not connected
-
PostgreSQL/PostGIS provider
%1
PostGIS %2
-
@@ -41117,42 +40817,42 @@ PostGIS %2
Unable to open %1
-
Project File Read Error
-
%1 at line %2 column %3
- %1在第%2行第%3列
+
Project file read error: %1 at line %2 column %3
-
%1 for file %2
-
Unable to save to file %1
-
%1 is not writable. Please adjust permissions (if possible) and try again.
-
Unable to save to file %1. Your project may be corrupted on disk. Try clearing some space on the volume and check file permissions before pressing save again.
-
@@ -41160,18 +40860,18 @@ PostGIS %2
Ignore
-
QGIS Project Read Error
-
Unable to open one or more project layers.
Choose ignore to continue loading without the missing layers. Choose cancel to return to your pre-project load state. Choose OK to try to find the missing layers.
-
@@ -41179,22 +40879,22 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select project file
-
QGIS files
- QGIS檔案
+
Recursive embedding not possible
-
It is not possible to embed layers / groups from the current project.
-
@@ -41202,173 +40902,173 @@ Choose ignore to continue loading without the missing layers. Choose cancel to r
Select layers and groups to embed
-
Project file
-
...
-
QgsProjectProperties
- Layer
圖層
- Type
類型
- Identifiable
可識別
- Vector
向量
- WMS
WMS
- Raster
影像
- Coordinate System Restriction
坐標參考系統
- No coordinate systems selected. Disabling restriction.
-
- Selection color
-
- Measure tool (CRS transformation: %1)
測量工具(CRS 轉換: %1)
- Canvas units (CRS transformation: %1)
地圖單位 (CRS 轉換: %1)
+ OFF
-
+ ON
-
- CRS %1 was already selected
-
+
+ Coordinate System Restrictions
+
Coordinate System Restrictions
-
-
- The current selection of coordinate systems will be lost.
Proceed?
-
- Select print composer
選取地圖出版
- Composer Title
設計標題
- Select restricted layers and groups
-
+
+ Enter scale
+
Enter scale
- 輸入比例
+ Scale denominator
+
- Scale denominator
- Load scales
+
Load scales
-
-
- XML files (*.xml *.XML)
-
-
XML files (*.xml *.XML)
+
+
+ Save scales
-
- Select a valid symbol
-
- Invalid symbol :
-
- Parameters:
- 參數:
+
+ Select %1 from pull-down menu to adjust radii
-
- Can only use ellipsoidal calculations when CRS transformation is enabled
-
@@ -41391,7 +41091,6 @@ Proceed?
Project title
專案主題
@@ -41431,37 +41130,37 @@ Proceed?
存檔路徑
- Measure tool
測量工具
- Semi-minor
短半軸
- Semi-major
長半軸
- Used when CRS transformation is turned off
當CRS轉換關閉時使用
- Canvas units
地圖單位
- Meters
公尺
- Feet
英呎
@@ -41493,98 +41192,98 @@ Proceed?
OWS 伺服器
- Ellipsoid
(for distance calculations)
橢球系統
(計算距離)
- Degree
度
- Degree display
度顯示
- Decimal degrees
十進位度
- Degrees, Minutes
度,分
- Degrees, Minutes, Seconds
度,分,秒
- Precision
精確度
- Automatically sets the number of decimal places in the mouse position display
在滑鼠位置的顯示中自動設定小數位數
- The number of decimal places that are used when displaying the mouse position is automatically set to be enough so that moving the mouse by one pixel gives a change in the position display
顯示滑鼠位置時用到的小數位數自動設定為足夠大，這樣在滑鼠移動一個像素的時候，位置的顯示能夠有所變化
- Automatic
自動
- Sets the number of decimal places to use for the mouse position display
為滑鼠位置的顯示設定小數位數
- Manual
手動
- The number of decimal places for the manual option
手動選項的小數位數
- decimal places
小數位
- Project scales
專案比例
- ...
...
- Enable 'on the fly' CRS transformation
開啟即時CRS轉換
@@ -41594,69 +41293,69 @@ Proceed?
可識別的圖層
- Project layers
專案圖層
- Layer
圖層
- Type
類型
- Identifiable
可識別
- Marker
圖示
- Line
線
- Default symbols
預設符讓
- Fill
填滿
- Color Ramp
色彩映射表
- Transparency
透明度
- %
%
- Style Manager
樣式管理
- Options
選項
@@ -41666,170 +41365,165 @@ Proceed?
關聯
- Project file
-
-
- Nautical miles
海里
- Assign random colors to symbols
分配隨機色彩至符號
- Service capabilities
服務能力
- Person
人員
- Title
標題
- Organization
組織
- Online resource
線上資源
- E-Mail
E-Mail
- Phone
電話
- Abstract
摘要
- Fees
收費
- Access constraints
存取限制
- Keyword list
關鍵字清單
- WMS capabilities
-
- Add geometry to feature response
-
- Min. X
X最小值
- Min. Y
Y最小值
- Max. X
X最大值
- Max. Y
Y最大值
- Use Current Canvas Extent
使用現在QGIS地圖的範圍
- Used
使用
- Exclude composers
排除出圖設計
- WFS capabilities
-
- WCS capabilities
-
- Exclude layers
排除圖層
- Quality for JPEG images ( 10 : smaller image - 100 : best quality )
-
- Published
已發佈
- Update
更新
- Insert
插入
- Delete
刪除
- Unselect all
取消全部選取
- Select all
全選
@@ -41840,39 +41534,39 @@ Proceed?
巨集
- Advertised URL
發送網址
- Width
寬度
- Height
高度
- Maximums for GetMap request
GetMap request的最大量
- Advertised extent
發送範圍
- CRS restrictions
CRS限制
- Python macros
Python巨集
@@ -41975,7 +41669,7 @@ Because of this the projection selector will not work...
Set provider filter on %1
-
The where clause returned %n row(s).
returned test rows
-
- where 子句傳回 %n 筆記錄。
-
+ where 子句傳回 %n 筆記錄。
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of fields in this vector file</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">List of values for the current field.</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Take a <span style=" font-weight:600;">sample</span> of records in the vector file</p></body></html>
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Retrieve <span style=" font-weight:600;">all</span> the record in the vector file (<span style=" font-style:italic;">if the table is big, the operation can consume some time</span>)</p></body></html>
-
Provider specific filter expression
-
@@ -42181,29 +41873,29 @@ p, li { white-space: pre-wrap; }
Editable
- 可編輯
+
Slider
-
Dial
-
Current minimum for this value is %1 and current maximum is %2.
-
Attribute has no integer or real type, therefore range is not usable.
-
@@ -42211,32 +41903,32 @@ p, li { white-space: pre-wrap; }
Form
- 表單
+
Allows setting of numeric values from a specified range. The edit widget can be either a slider or a spin box.
-
Step
-
Maximum
- 最大值
+
Minimum
- 最小值
+
Local minimum/maximum = 0/0
-
@@ -42262,22 +41954,22 @@ p, li { white-space: pre-wrap; }
Raster calculator
-
Raster bands
-
Result layer
-
Output layer
- 輸出圖層
+
Current layer extent
-
X min
- X最小
+
XMax
-
Y min
- Y最小
+
Y max
- Y最大
+
Columns
-
Rows
-
Output format
- 輸出格式
+
Add result to project
- 將結果加入專案
+
Operators
- 運算符號
+
*
-
sqrt
-
sin
-
^
- ^
+
acos
-
(
-
cos
-
asin
-
tan
-
atan
-
)
-
OR
- OR
+
AND
- AND
+
Raster calculator expression
-
@@ -42450,27 +42142,27 @@ p, li { white-space: pre-wrap; }
Format not supported
-
Value
- 值
+
Text
- 文字
+
Html
-
Feature
- 圖徵
+
@@ -42478,61 +42170,61 @@ p, li { white-space: pre-wrap; }
Default
- 預設
+
No compression
-
Low compression
-
High compression
-
JPEG compression
-
Cannot get create options for driver %1
-
For details on pyramids options please see the following pages
-
No help available
-
cannot validate pyramid options
-
Cannot validate creation options
-
Valid
-
pyramid creation option
-
creation option
-
Profile name:
-
Use simple interface
-
Use table interface
-
@@ -42574,62 +42266,62 @@ Click on help button to get valid creation options for this format.
Form
- 表單
+
New
- 新增
+
Remove
- 移除
+
Reset
- 重設
+
Profile
-
Name
- 名稱
+
Value
- 值
+
+
- +
+
Validate
-
Help
- 說明
+
-
- -
+
Insert KEY=VALUE pairs separated by spaces
-
@@ -42637,119 +42329,119 @@ Click on help button to get valid creation options for this format.
Visibility
- 可見性
+
Min/Max options
-
Always show min/max markers
-
Zoom to min/max
-
Update style to min/max
-
Show all bands
-
Show RGB/Gray band(s)
-
Show selected band
-
Display
- 顯示
+
Draw as lines
-
Draw as lines (only int layers)
-
Actions
- 動作設計
+
Reset
- 重設
+
Load min/max
-
Estimate (faster)
- 估算(較快)
+
Actual (slower)
- 實際(較慢)
+
Current extent
- 目前範圍
+
Use stddev (1.0)
-
Use stddev (custom)
-
Load for each band
-
Recompute Histogram
-
Band %1
-
Choose a file name to save the map image as
- 請選擇地圖影像的檔名為
+
@@ -42757,58 +42449,58 @@ Click on help button to get valid creation options for this format.
Form
- 表單
+
Set min/max style for
-
Min
- 最小值
+
Pick Min value on graph
-
...
-
Max
- 最大值
+
Pick Max value on graph
-
Prefs/Actions
-
Save plot
-
Save as image...
-
Compute Histogram
-
@@ -42816,27 +42508,27 @@ Click on help button to get valid creation options for this format.
Identify
- 識別圖徵
+
Build Pyramids
-
Create Datasources
-
Remove Datasources
-
Band
- 波段
+
@@ -42851,12 +42543,12 @@ Click on help button to get valid creation options for this format.
QgsRasterLayer created
-
Raster
- 影像
+
NoDataValue not set
-
Driver
- 驅動程式
+
Data Type
-
Byte - Eight bit unsigned integer
-
UInt16 - Sixteen bit unsigned integer
-
Int16 - Sixteen bit signed integer
-
UInt32 - Thirty two bit unsigned integer
-
Int32 - Thirty two bit signed integer
-
Float32 - Thirty two bit floating point
-
Float64 - Sixty four bit floating point
-
CInt16 - Complex Int16
-
CInt32 - Complex Int32
-
CFloat32 - Complex Float32
-
CFloat64 - Complex Float64
-
Pyramid overviews
-
Layer Spatial Reference System
- 圖層的空間參考系統
+
Layer Extent (layer original source projection)
-
Project Spatial Reference System
-
Cannot instantiate the '%1' data provider
-
Provider is not valid (provider: %1, URI: %2
-
<maplayer> not found.
-
@@ -43739,7 +43431,7 @@ Click on help button to get valid creation options for this format.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Cantarell';"><br /></span></p></body></html>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
@@ -43894,38 +43586,38 @@ p, li { white-space: pre-wrap; }
Write out raw raster layer data. Optionally user defined no data values may be applied.
-
Raw data
-
Write out 3 bands RGB image rendered using current layer style.
-
Rendered image
-
Format
- 格式
+
Create GDAL Virtual Format composed of multiple
datasets with maximum width and height specified below.
-
Create VRT
-
CRS
-
VRT Tiles
-
Maximum number of columns in one tile.
-
Max columns
-
Maximum number of rows in one tile.
-
Max rows
-
Create Options
- 建立選項
+
Pyramid resolutions corresponding to levels given
-
Use existing
-
Additional no data values. The specified values will be set to no data in output raster.
-
No data values
- 無資料值
+
...
-
Load user defined fully transparent (100%) values
-
No option selected
-
Please select an option to load min/max values.
-
@@ -44178,7 +43870,7 @@ standard deviation ×
Insert positive integer values separated by spaces
-
Internal (if possible)
- 內部 (如果可能)
+
Levels
-
Resampling method
- 重新取樣方法
+
Nearest Neighbour
-
Overview format
- 全覽圖格式
+
@@ -44236,53 +43928,53 @@ standard deviation ×
Unknown
- 未知
+
User defined
-
Estimated
-
Exact
-
min / max
-
cumulative cut
-
standard deviation
-
full extent
-
sub extent
-
%1 %2 of %3.
min/max origin label in raster properties, where %1 - estimated/exact, %2 - values (min/max, stddev, etc.), %3 - extent
-
@@ -44310,43 +44002,43 @@ standard deviation ×
The relief color file could not be opened
-
Error parsing xml
-
The xml file could not be loaded
-
Enter result file
- 輸入結果檔案
+
Enter lower elevation class bound
-
Elevation
-
Enter upper elevation class bound
-
Select color for relief class
-
@@ -44473,35 +44165,35 @@ standard deviation ×
Slope
-
Aspect
-
Hillshade
-
Relief
-
Ruggedness index
-
Calculating hillshade...
-
Abort
- 放棄
+
Calculating relief...
-
Calculating slope...
-
Calculating aspect...
-
Ruggedness
-
Calculating ruggedness...
-
@@ -44551,32 +44243,32 @@ standard deviation ×
Dialog
-
Display expression
-
Expression Builder
-
Allow NULL value
-
Show embedded form
-
Relation
-
@@ -44584,19 +44276,19 @@ standard deviation ×
Cannot create relation. Unexpected tag '%1'
-
Relation defined for layer '%1' which does not exist.
-
Relation defined for layer '%1' which is not of type VectorLayer.
-
@@ -44650,43 +44342,43 @@ standard deviation ×
Form
- 表單
+
Toggle editing
-
New
- 新增
+
Delete
- 刪除
+
Link
-
Unlink
-
Form View
- 表單檢視
+
Table View
- 表格檢視
+
@@ -44694,47 +44386,47 @@ standard deviation ×
Dialog
-
Name
- 名稱
+
Referencing Layer
-
Referencing Field
- 參考中欄位
+
Referenced Layer
-
Referenced Field
- 已參考欄位
+
Id
- Id
+
Add Relation
-
Remove Relation
-
@@ -44742,17 +44434,17 @@ standard deviation ×
Open Form
-
(no selection)
-
The relation is not valid. Please make sure your relation definitions are ok.
-
@@ -44818,9 +44510,7 @@ standard deviation ×
Filter returned %n feature(s)
number of filtered features
-
- 過濾後傳回 %n 圖徵
-
+ 過濾後傳回 %n 圖徵
@@ -45118,12 +44808,12 @@ standard deviation ×
Parent rule %1 must have a symbol for this operation.
-
Please enter scale denominators at which will split the rule, separate them by commas (e.g. 1000,5000):
-
"%1" is not valid scale denominator, ignoring it.
-
Failed to check metadata
-
Failed to get list of tables
-
Unknown error
-
Delete
- 刪除
+
%1: Not a vector layer!
- %1: 不是一個向量圖層！
+
%1: OK!
-
Import to SpatiaLite database
-
Failed to import some layers!
- 匯入一些圖層失敗！
-
-
+
Import was successful.
- 已成功匯入。
+
@@ -45247,12 +44935,12 @@ standard deviation ×
Delete layer
- 刪除圖層
+
Layer deleted successfully.
- 圖層刪除成功。
+
@@ -45260,39 +44948,39 @@ standard deviation ×
New Connection...
- 新增連線...
+
Create database...
-
New SpatiaLite Database File
-
SpatiaLite
- SpatiaLite
+
Create SpatiaLite database
-
The database has been created
-
Failed to create the database:
-
@@ -45356,32 +45044,32 @@ standard deviation ×
Save style in database
-
A name is mandatory
-
Attach Qt Designer UI file
-
Qt Designer UI file .ui
-
Wrong file
-
The selected file does not appear to be a valid Qt Designer UI file.
-
@@ -45389,37 +45077,37 @@ standard deviation ×
Save style
-
Description
-
UI
-
Style Name
-
Use as default style for this layer
-
Open...
-
Optionally pick an input form for attribute editing (QT Designer UI format), it will be stored in the database
-
@@ -45488,7 +45176,7 @@ standard deviation ×
Save query to an xml file
-
Load query from xml file
-
Found %n matching feature(s).
test result
-
- 找到%n符合的圖徵。
-
+ 找到%n符合的圖徵。
Error during search
-
Save query to file
-
Could not open file for writing
-
Load query from file
-
Could not open file for reading
-
File is not a valid xml document
-
File is not a valid query document
-
There is no attribute '%1' in the current vector layer. Please select an existing attribute
-
@@ -45603,45 +45289,43 @@ standard deviation ×
Validation started.
-
Validation finished (%n error(s) found).
number of geometry errors
-
-
+
ring %1, vertex %2
-
polygon %1, ring %2, vertex %3
-
polyline %1, vertex %2
-
vertex %1
-
point %1
-
single point
-
@@ -45660,25 +45344,25 @@ standard deviation ×
The error was:
%2
-
The database gave an error while executing this SQL:
-
... (rest of SQL trimmed)
is appended to a truncated SQL statement
-
The error was:
%1
-
@@ -45942,7 +45626,7 @@ enhancement
Discrete
-
Linear
- 線性
+
Exact
-
Continuous
-
Equal interval
-
Custom color map entry
-
Load Color Map
-
The color map for band %1 has no entries
-
Open file
- 開啟檔案
+
Textfile (*.txt)
-
Import Error
- 匯入錯誤
+
The following lines contained errors
-
Read access denied
- 拒絕讀取存取
+
Read access denied. Adjust the file permissions and try again.
- 拒絕讀取存取。請調整檔案權限再試。
-
-
+
Save file
- 儲存檔案
+
QGIS Generated Color Map Export File
-
Write access denied
- 拒絕寫入存取
+
Write access denied. Adjust the file permissions and try again.
- 拒絕寫入存取。調整檔案權限再試。
-
-
+
@@ -46184,32 +45864,32 @@ enhancement
has the tag
-
is a member of group
-
has a part of name matching
-
does NOT have the tag
-
is NOT a member of group
-
has NO part of name matching
-
@@ -46230,22 +45910,22 @@ enhancement
ALL the constraints
-
any ONE of the constraints
-
Invalid name
-
The smart group name field is empty. Kindly provide a name
-
@@ -46253,27 +45933,27 @@ enhancement
Smart Group Editor
-
Smart Group Name
-
Condition matches
-
Add Condition
-
Conditions
-
@@ -46281,34 +45961,34 @@ enhancement
Snapping and Digitizing Options
-
to vertex
-
to segment
-
to vertex and segment
-
map units
- 地圖單位
+
pixels
- 像素
+
@@ -46364,70 +46044,70 @@ enhancement
obsolete libspatialite: connecting to this DB requires using v.4.0 (or any subsequent)
-
unknown error cause
-
obsolete libspatialite: AbstractInterface is unsupported
-
table info on %1 failed
-
UNKNOWN
-
GEOMETRY
-
POINT
-
LINESTRING
-
POLYGON
-
MULTIPOINT
-
MULTILINESTRING
-
MULTIPOLYGON
-
GEOMETRYCOLLECTION
-
@@ -46435,12 +46115,12 @@ enhancement
Binary object (BLOB)
-
Text
- 文字
+
Retrieval of spatialite version failed
-
SpatiaLite
- SpatiaLite
+
Could not parse spatialite version string '%1'
-
SQLite error: %2
SQL: %1
-
unknown cause
-
FAILURE: Field %1 not found.
-
@@ -46801,131 +46481,129 @@ but implies better performance thereafter.
%n selected geometries
selected geometries
-
-
+
Selected geometries
-
%1)Query
-
Begin at %L1
-
< %1 >
-
Total of features = %1
-
Total of invalid features:
-
Finish at %L1 (processing time %L2 minutes)
-
Using the field "%1" for subset
-
Sorry! Only this providers are enable: OGR, POSTGRES and SPATIALITE.
-
%1 of %2
-
all = %1
-
%1 of %2(selected features)
-
Create new selection
-
Add to current selection
-
Remove from current selection
-
Result query
-
Invalid source
-
Invalid reference
-
%1 of %2 selected by "%3"
-
user
- 使用者
+
Map "%1" "on the fly" transformation.
-
enable
-
disable
- 禁用
+
Coordinate reference system(CRS) of
"%1" is invalid(see CRS of provider).
-
Zoom to feature
-
Missing reference layer
-
Select reference layer!
-
Missing target layer
-
Select target layer!
-
Create new layer from items
-
The query from "%1" using "%2" in field not possible.
-
Create new layer from selected
-
%1 of %2 identified
-
@@ -46992,122 +46670,122 @@ CRS of map is %1.
Layer on which the topological operation will select geometries
-
Select source features from
-
Select the target layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will only consider selected geometries of the target layer</span></p></body></html>
-
Selected feature(s) only
-
Where the feature
-
Select the topological operation
-
Layer whose geometries will be used as reference by the topological operation
-
Reference features of
-
Select the reference layer
-
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">When checked the operation will be only consider selected geometries of the reference layer</span></p></body></html>
-
And use the result to
-
Selected features
-
Number of selected features in map
-
Create layer with selected
-
Result feature ID's
-
Select one FID to identify geometry of feature
-
Create layer with list of items
-
Zoom to item
-
Check to show log processing of query
-
Log messages
-
Run query or close the window
-
@@ -47199,7 +46877,7 @@ p, li { white-space: pre-wrap; }
Are you sure you want to remove the [%1] connection and all associated settings?
-
Shapefiles
- Shape檔案
+
All files
-
-you need to select a connection that works (connects properly) in order to import files
-
-when changing connections Global Schema also changes accordingly
-
[Add ...] - open a File dialog and browse to the desired file(s) to import
-
[Remove] - remove the currently selected file(s) from the list
-
[Remove All] - remove all the files in the list
-
[SRID] - Reference ID for the shapefiles to be imported
-
[Use Default (SRID)] - set SRID to -1
-
[Geometry Column Name] - name of the geometry column in the database
-
[Use Default (Geometry Column Name)] - set column name to 'the_geom'
-
[Global Schema] - set the schema for all files to be imported into
-
[Import] - import the current shapefiles in the list
-
[Quit] - quit the program
-
[Help] - display this help dialog
-
<p>The chosen database does not have PostGIS installed, but this is required for storage of spatial data.</p>
-
Problem inserting features from file:
-
%1
Invalid table name.
-
%1
No fields detected.
-
%1
The following fields are duplicates:
%2
-
%1
<p>Error while executing the SQL:</p><p>%2</p><p>The database said:%3</p>
-
%1 of %2 shapefiles could not be imported.
-
@@ -47487,7 +47165,7 @@ Do you want to overwrite the [%2] relation?
PostgreSQL connections
-
Geometry column name
-
Use default geometry column name
-
SRID
-
Use default SRID
-
Primary key column name
-
QGIS Sponsors
- QGIS贊助者
+
TextLabel
- 文字標記
+
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
+</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">
+<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">We work really hard to make this nice software for you. See all the cool features it has? Get a warm fuzzy feeling when you use it? QGIS is a labour of love by a dedicated team of developers. We want you to copy & share it and put it in the hands of as many people as possible. If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our bi-annual hackfests, and to generally support the goals of our project. <br /><br />Please see the </span><a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html"><span style=" font-family:'Ubuntu'; font-size:10pt; text-decoration: underline; color:#0000ff;">QGIS Sponsorship Web Page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> for more details. In the </span><a href="http://qgis.org/en/site/about/sponsorship.html#list-of-sponsors"><span style=" text-decoration: underline; color:#0000ff;">Sponsors page</span></a><span style=" font-family:'Ubuntu'; font-size:10pt;"> you can see the fine people and companies that are helping us financially - a great big 'thank you' to you all!</span></p>
<hr />
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/gold.png" /></p>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/aas_300wide.png" /></p>
@@ -47661,7 +47339,155 @@ p, li { white-space: pre-wrap; }
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src=":/images/sponsors/sponsors/ibw.png" /> <img src=":/images/sponsors/sponsors/geosynergy.png" /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<hr /></body></html>
-
+
+
+ QgsSqlAnywhereProvider
+
+ Failed to load interface
+
+
+ Failed to connect to database
+
+
+ A connection to the SQL Anywhere database cannot be established.
+
+
+ No suitable key column
+
+
+ The source relation %1 has no column suitable for use as a unique key.
+
+QGIS requires that the relation has an integer column no larger than 32 bits containing unique values.
+
+
+ Error loading attributes
+
+
+ Ambiguous field!
+
+
+ Duplicate field %1 found
+
+
+
+ Read attempt on an invalid SqlAnywhere data source
+
+
+ SQLAnywhere
+
+
+ Error inserting features
+
+
+ Error deleting features
+
+
+ Error adding attributes
+
+
+ Error deleting attributes
+
+
+ Attribute not found
+
+
+ Error updating attributes
+
+
+ Error updating features
+
+
+ Error verifying geometry column %1
+
+
+ Unknown geometry type
+
+
+ Column %1 has a geometry type of %2, which QGIS does not currently support.
+
+
+ Column %1 is not restricted to a single SRID, which QGIS requires.
+
+
+ Because QGIS supports only planar data, the SQL Anywhere data provider will transform the data to the compatible planar projection (SRID=%1).
+
+
+ Because QGIS supports only planar data and no compatible planar projection was found, the SQL Anywhere data provider will attempt to transform the data to planar WGS 84 (SRID=%1).
+
+
+ Mixed Spatial Reference Systems
+
+
+ Error checking database ReadOnly property
+
+
+ Error loading SRS definition
+
+
+ Limited Support of Round Earth SRS
+
+
+ Column %1 (%2) contains geometries belonging to a round earth spatial reference system (SRID=%3). %4
+
+Updates to geometry values will be disabled, and query performance may be poor because spatial indexes will not be utilized. To improve performance, consider creating a spatial index on a new (possibly computed) column containing a planar projection of these geometries. For help, refer to the descriptions of the ST_SRID(INT) and ST_Transform(INT) methods in the SQL Anywhere documentation.
+
@@ -47674,158 +47500,158 @@ p, li { white-space: pre-wrap; }
Clear selection
- 清除選取
+
Import style(s)
-
file specified below
-
URL specified below
-
Select symbols to import
-
Import
- 匯入
+
Export style(s)
-
Export
- 匯出
+
Export/import error
- 匯出/匯入 錯誤
+
You should select at least one symbol/color ramp.
-
Save styles
-
XML files (*.xml *.XML)
-
Error when saving selected symbols to file:
%1
-
Import error
-
An error occured during import:
%1
-
Group Name
-
Please enter a name for new group:
-
imported
-
New Group
-
New group cannot be created without a name. Kindly enter a name.
-
New group
-
Cannot create a group without name. Enter a name.
-
Duplicate names
-
Symbol with name '%1' already exists.
+ Symbol with name '%1' already exists.
Overwrite?
-
Color ramp with name '%1' already exists.
+ Color ramp with name '%1' already exists.
Overwrite?
-
Load styles
-
XML files (*.xml *XML)
- XML 檔案 (*.xml *.XML)
+
Downloading style ...
-
HTTP Error!
-
Download failed: %1.
-
@@ -47940,43 +47766,43 @@ Overwrite?
cpt-city
-
new symbol
-
new marker
-
new line
-
new fill symbol
-
Symbol Name
- 符號名稱
+
Please enter a name for new symbol:
-
Save symbol
- 儲存符號
+
Symbol with name '%1' already exists. Overwrite?
- 符號名稱為 '%1' 已經存在。是否要覆蓋？
+
Color ramp type
-
Please select color ramp type:
-
new ramp
-
new gradient ramp
-
new random ramp
-
Please enter a name for new color ramp:
-
Save Color Ramp
-
Save color ramp
-
Color ramp with name '%1' already exists. Overwrite?
-
Invalid Selection
-
The parent group you have selected is not user editable.
Kindly select a user defined group.
-
Operation Not Allowed
-
Creation of nested smart groups are not allowed
Select the 'Smart Group' to create a new group.
-
New Group
-
Invalid selection
-
Error!
- 錯誤!
+
New group could not be created.
There was a problem with your symbol database.
-
Finish Grouping
-
Database Error
- 資料庫錯誤
+
There was a problem with the Symbols database while regrouping.
-
Edit Group
-
Remove Group
-
You have not selected a Smart Group. Kindly select a Smart Group to edit.
-
Database Error!
-
There was some error while editing the smart group.
-
@@ -48238,51 +48064,51 @@ There was a problem with your symbol database.
Select vector layers to add...
-
Layer ID
-
Layer name
- 圖層名稱
+
Number of features
-
Geometry type
- 幾何類型
+
Select raster layers to add...
-
Select layers to add...
-
Type
-
Select All
- 全選
+
@@ -48326,23 +48152,23 @@ There was a problem with your symbol database.
SVG request failed [error: %1 - url: %2]
-
SVG
- SVG
+
SVG request error [status: %1 - reason phrase: %2]
-
%1 of %2 bytes of svg image downloaded.
-
@@ -48350,17 +48176,17 @@ There was a problem with your symbol database.
SVG export options
-
Export map layers as svg groups (may affect label placement)
-
Render text as outline
-
@@ -48370,64 +48196,64 @@ There was a problem with your symbol database.
Millimeter
- 公釐
+
Map unit
- 地圖單位
+
Select SVG file
- 選取SVG檔案
+
SVG files
- SVG檔案
+
Border width
- 邊線寬度
+
Angle
- 角度
+
Offset
- 偏移
+
SVG file
- SVG檔案
+
Color
- 色彩
+
Border color
- 邊線色彩
+
Horizontal anchor point
- 水平錨點
+
Vertical anchor point
- 垂直錨點
+
@@ -48435,12 +48261,12 @@ There was a problem with your symbol database.
App Symbols
-
User Symbols
-
@@ -48448,17 +48274,17 @@ There was a problem with your symbol database.
Select SVG file
- 選取SVG檔案
+
SVG files
- SVG檔案
+
File not found
- 未找到檔案
+
@@ -48543,37 +48369,37 @@ There was a problem with your symbol database.
Add symbol layer
-
Remove symbol layer
-
Lock layer's color
-
Move up
-
Move down
-
Save symbol
- 儲存符號
+
Save
- 儲存
+
@@ -48630,7 +48456,7 @@ There was a problem with your symbol database.
Clough-Toucher (cubic)
-
Tile scale
-
@@ -48733,172 +48559,172 @@ There was a problem with your symbol database.
QGIS Publications
-
If you write a scientific paper or any other article that refers to QGIS we would love to include your work in the <a href="http://qgis.org/en/site/about/case_studies/index.html">case studies section</a> of the QGIS home page.
-
Become an QGIS translator
-
QGIS Mailing lists
-
Is it 'QGIS' or 'Quantum GIS'?
-
QGIS is open source
-
QGIS is open source software. This means that the software source code can be freely viewed and modified. The GPL places a restriction that any modifications you make must be made available in source form to whoever you give modified versions to, and that you can not create a new version of QGIS under a 'closed source' license. Visit <a href="http://qgis.org"> the QGIS home page (http://qgis.org)</a> for more information.
-
Both used to be correct, but we recently decided to just use 'QGIS'. For articles we suggest you write 'QGIS is ....'
-
How do I refer to QGIS?
-
QGIS is spelled in all caps. We have various subprojects of the QGIS project and it will help to avoid confusion if you refer to each by its name:<ul><li>QGIS Library - this is the C++ library that contains the core logic that is used to build the QGIS user interface and other applications.</li><li>QGIS Application - this is the desktop application that you know and love so much :-).</li><li>QGIS Mapserver - this is a server-side application based on the QGIS Library that will serve up your .qgs projects using the WMS protocol.</li></ul>
-
Add the current date to a map layout
-
Moving Elements and Maps in the Print Composer
-
In the print composer tool bar you can find two buttons for moving elements. The left one (right arrow icon) selects and moves elements in the layout. After selecting the element with this tool you can also move them around with the arrow keys. For accurate positioning use the <strong>Position and Size</strong> section, which can be found in the tab <strong>Item Properties -> Position and Size</strong>. The other move tool (map canvas icon with right arrow) allows one to move the map content within a map frame.
-
Lock an element in the layout view
-
By left clicking an element in the layout view you can select it, by right clicking an element you can lock it. A lock symbol will appear in the upper left corner of the selected element. This prevents the element from accidentally being moved with the mouse. While in a locked state, you cannot move an element with the mouse but you can still move it with the arrow keys or by absolutely positioning it by setting its <strong>Position and Size</strong>.
-
Rotating a map and linking a north arrow
-
Would you like to see QGIS in your native language? We are looking for more translators and would appreciate your help! The translation process is fairly straight forward - instructions are available in the QGIS wiki <a href="http://qgis.org/en/site/getinvolved/translate.html#howto-translate-gui">translator's page.</a>
-
If you need help using QGIS we have a 'users' mailing list where users help each other with issues related to using our sofware. We also have a 'developers' mailing list. for those wanting help and to discuss things relating to the QGIS code base. Details on how to subscribe are in the <a href="http://qgis.org/en/site/forusers/support.html#mailing-lists">community section</a> of the QGIS home page.
-
You can add a current date variable to your map layout. Create a regular text label and add the string $CURRENT_DATE(yyyy-MM-dd) to the text box. See the <a href="http://qt-project.org/doc/qt-5.0/qtcore/qdate.html#toString">QDate::toString format documentation</a> for the possible date formats.
-
Numeric scale value in map layout linked to map frame
-
If you want to place a text label as a placeholder for the current scale, linked to a map frame, you need to place a scalebar and set the style to 'Numeric'. You also need to select the map frame, if there is more than one.
-
Using the mouse scroll wheel
-
You can use the scroll wheel on your mouse to zoom in, out and pan the map. Scroll forwards to zoom in, scroll backwards to zoom out and press and hold the scroll wheel down to pan the map. You can configure options for scroll wheel behaviour in the Options panel.
-
Stopping rendering
-
If QGIS is saving you money or you like our work and have the financial ability to help, please consider sponsoring the development of QGIS. We use money from sponsors to pay for travel and costs related to our regular hackfest meetings, and to generally support the goals of our project. Please see the <a href="http://qgis.org/en/site/getinvolved/governance/sponsorship/sponsorship.html">QGIS Sponsorship Web Page</a> for more details.
-
QGIS has plugins that extend its functionality. QGIS ships with some core plugins you can explore from the Plugins->Manage and Install Plugins menu. In addition there are a lot of <a href="http://plugins.qgis.org/">Python plugins </a> contributed by the user community that can be installed via this same menu. Don't miss out on all QGIS has to offer! Check out the plugins and see what they can do for you.
-
Join intersected polylines when rendering
-
In the Print Composer you can rotate a map by setting its rotation value in the tab <strong>Item Properties -> Map -> Main properties</strong> section. To place a north arrow in your layout you can use the <strong>Add Image</strong> tool. After the selection and placement of the north arrow in the layout you can link it with a specific map frame by activating the <strong>Sync with map</strong> checkbox and selecting a map frame. Whenever you change the rotation value of a linked map, the north arrow will now automatically adjust its rotation.
-
Sometimes you have a very large dataset which takes ages to draw. You can press 'Esc' (the escape key), or click the 'Stop map rendering' icon in the status bar to the bottom of the window at any time to halt rendering. If you are going to be performing several actions (e.g. modifying symbology options) and wish to temporarily disable map rendering while you do so, you can uncheck the 'Render' checkbox in the bottom right of the status bar. Don't forget to check it on again when you are ready to have the map draw itself again!
-
When applying layered styles to a polyline layer, you can join intersecting lines together simply by enabling symbol levels. The image below shows a before (left) and after (right) view of an intersection when symbol levels are enabled.
-
Auto-enable on the fly projection
-
In the options dialog, under the CRS tab, you can set QGIS so that whenever you create a new project, 'on the fly projection' is enabled automatically and a pre-selected Coordinate Reference System of your choice is used.
-
Sponsor QGIS
-
QGIS has Plugins!
-
@@ -48906,12 +48732,12 @@ There was a problem with your symbol database.
&Previous
-
&Next
-
@@ -48926,9 +48752,9 @@ There was a problem with your symbol database.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
+</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:10pt;">A nice tip goes here...</span></p></body></html>
-
Lanczos
-
The user can select one of the values already used in the attribute. If editable, a line edit is shown with autocompletion support, otherwise a combo box is used.
-
Adjust scaling range
-
@@ -49198,18 +49024,18 @@ p, li { white-space: pre-wrap; }
Select a file
-
Error
- 錯誤
+
Could not open file %1
Error was:%2
-
@@ -49217,37 +49043,37 @@ Error was:%2
Form
- 表單
+
Combo box with predefined items. Value is stored in the attribute, description is shown in the combo box.
-
Load Data from layer
-
Load Data from CSV file
-
Value
- 值
+
Description
-
Remove Selected
-
@@ -49255,7 +49081,7 @@ Error was:%2
Edit filter expression
-
@@ -49263,52 +49089,52 @@ Error was:%2
Form
- 表單
+
Select layer, key column and value column
-
Layer
- 圖層
+
Key column
- 關鍵欄
+
Value column
-
Allow null value
-
Order by value
-
Allow multiple selections
-
Filter expression
-
...
-
@@ -49316,7 +49142,7 @@ Error was:%2
(no selection)
-
@@ -49347,57 +49173,57 @@ Error was:%2
Codec %1 not found. Falling back to system locale
-
Add Features
-
Delete Features
-
Change Attribute Values
-
Add Attributes
-
Delete Attributes
- 刪除屬性
+
Create Spatial Index
-
Fast Access to Features at ID
-
Change Geometries
-
Simplify Geometries
-
Simplify Geometries with topological validation
-
@@ -49433,46 +49259,46 @@ Error was:%2
Discrete
-
Continuous
-
Gradient file : %1
-
License file : %1
-
Edit Stop Color
-
Offset of the stop
-
Please enter offset in percents (%) of the new stop
-
Add Color Stop
-
@@ -49496,12 +49322,12 @@ Error was:%2
Change...
- 變更...
+
Type
-
Updating feature count for layer %1
-
Abort
- 放棄
+
Commit errors:
%1
-
Description of this provider
-
xMin,yMin %1,%2 : xMax,yMax %3,%4
-
SUCCESS: %n attribute(s) deleted.
deleted attributes count
-
- 成功: %n 屬性已刪除。
-
+ 成功: %n 屬性已刪除。
ERROR: %n attribute(s) not deleted.
not deleted attributes count
-
- 錯誤: %n 屬性未刪除。
-
+ 錯誤: %n 屬性未刪除。
SUCCESS: %n attribute(s) added.
added attributes count
-
- 成功: %n 屬性已加入。
-
+ 成功: %n 屬性已加入。
ERROR: %n new attribute(s) not added
not added attributes count
-
- 錯誤: %n 新屬性未加入
-
+ 錯誤: %n 新屬性未加入
ERROR: the count of fields is incorrect after addition/removal of fields!
-
ERROR: field with index %1 is not the same!
-
Provider: %1
-
Storage: %1
-
expected field
-
retrieved field
-
SUCCESS: %n attribute value(s) changed.
changed attribute values count
-
-
+
ERROR: %n attribute value change(s) not applied.
not changed attribute values count
-
-
+
SUCCESS: %n feature(s) deleted.
deleted features count
-
-
+
ERROR: %n feature(s) not deleted.
not deleted features count
-
-
+
SUCCESS: %n feature(s) added.
added features count
-
-
+
ERROR: %n feature(s) not added.
not added features count
-
-
+
ERROR: %n feature(s) not added - provider doesn't support adding features.
not added features count
-
-
+
SUCCESS: %n geometries were changed.
changed geometries count
-
-
+
ERROR: %n geometries not changed.
not changed geometries count
-
-
+
Provider errors:
-
@@ -49893,7 +49693,7 @@ Error was:%2
Not supported
- 不支持
+
This allows one to surpress attribute creation as some OGR drivers (eg. DGN, DXF) don't support it.
-
1:
- 1:
+
Either the WFS server does not support WFS version 1.0.0 or the WFS url is wrong
-
@@ -50605,12 +50405,12 @@ Error was:%2
DescribeFeatureType failed for url %1
-
WFS
-
empty response
-
WFS service exception:%1
-
unsuccessful service response: %1
-
WFS exception report (code=%1 text=%2)
-
missing
-
unhandled response: %1
-
@@ -50671,17 +50471,17 @@ Error was:%2
&Add
- 加入 (&A)
+
&Build query
-
Build query
-
Filter:
-
Display WFS FeatureTypes containing this word in the title, name or abstract
-
Use title for layer name
-
Options (%n coordinate reference systems available)
crs count
-
- 選項(%n坐標參考系統可以使用)
-
+ 選項(%n坐標參考系統可以使用)
Coordinate Reference System (%n available)
crs count
-
- 坐標參考系統 (%n可使用)
-
+ 坐標參考系統 (%n可使用)
%n Layer(s) selected
selected layer count
-
- %n 個圖層已選取
-
+ %n 個圖層已選取
empty capabilities document
-
Tried URL: %1
-
Capabilities request redirected.
-
empty of capabilities: %1
-
Download of capabilities failed: %1
-
WCS
-
%1 of %2 bytes of capabilities downloaded.
-
Exception
- 意外錯誤
+
Could not get WCS capabilities: %1
-
Dom Exception
-
Version not supported
-
WCS server version %1 is not supported by QGIS (supported versions: 1.0.0, 1.1.0, 1.1.2)
-
@@ -51340,7 +51134,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WCS
-
Map request error:<br>Title: %1<br>Error: %2<br>URL: <a href='%3'>%3</a>)
-
Map request error (Status: %1; Response: %2; URL:%3)
-
Cannot parse multipart response: %1
-
Expected 2 parts, %1 received
-
More than 2 parts (%1) received
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Response: %1; URL:%2)
-
Content-Transfer-Encoding %1 not supported
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51417,27 +51211,27 @@ Response was:
Cannot describe coverage
-
Coverage not found
-
Cannot calculate extent
-
Cannot get test dataset.
-
Received coverage has wrong extent %1 (expected %2)
-
WCS
-
Rotating raster
-
Block read OK
-
Received coverage has wrong size %1 x %2 (expected %3 x %4)
-
Getting map via WCS.
-
No data received
-
Cannot create memory file
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request is for a Coverage not offered by the service instance.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a parameter value, and the server instance did not declare a default value for that dimension.
-
Request contains an invalid parameter value.
-
No other exceptionCode specified by this service and server applies to this exception.
-
Operation request contains an output CRS that can not be used within the output format.
-
Operation request specifies to "store" the result, but not enough storage is available to do this.
-
(No error code was reported)
-
(Unknown error code)
-
The WCS vendor also reported:
-
composed error message '%1'.
-
Cannot verify coverage full extent: %1
-
Property
- 屬性
+
Value
- 值
+
Name (identifier)
-
Title
- 標題
+
Abstract
- 摘要
+
Fixed Width
- 固定寬度
+
Fixed Height
- 固定高度
+
Native CRS
-
Native Bounding Box
-
WGS 84 Bounding Box
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in format
-
Coverages
-
Cache Stats
- 快取狀態
+
Server Properties
-
Keywords
- 關鍵字
+
Online Resource
- 線上資源
+
Contact Person
- 連絡人
+
Fees
- 收費
+
Access Constraints
-
Image Formats
- 影像格式
+
GetCapabilitiesUrl
-
Get Coverage Url
-
<font color="red">(advertised but ignored)</font>
-
And %1 more coverages
-
Format not supported
-
Read data error
-
RasterIO error:
-
@@ -51731,12 +51523,12 @@ Response was:
...
-
Select a file
-
@@ -51744,22 +51536,22 @@ Response was:
Form
- 表單
+
Field contains a filename or URL for a webpage
-
Width
- 寬度
+
Height
- 高度
+
@@ -51767,33 +51559,33 @@ Response was:
%1 of %2 bytes of capabilities downloaded.
-
Capabilities request redirected.
-
Redirect loop detected: %1
-
WMS
- WMS
+
empty of capabilities: %1
-
Download of capabilities failed: %1
-
@@ -51801,7 +51593,7 @@ Response was:
Map request error (Status: %1; Reason phrase: %2; URL:%3)
-
WMS
- WMS
+
Returned image is flawed [Content-Type:%1; URL:%2]
-
Map request error (Title:%1; Error:%2; URL: %3)
-
Map request error (Status: %1; Response: %2; Content-Type: %3; URL:%4)
-
Map request failed [error:%1 url:%2]
-
Not logging more than 100 request errors.
-
%1 of %2 bytes of map downloaded.
-
@@ -51849,22 +51641,22 @@ Response was:
Cannot parse URI
-
Cannot calculate extent
-
Cannot set CRS
-
Number of layers and styles don't match
-
WMS
- WMS
+
Number of tile layers must be one
-
Tile layer not found
-
Tile layer or tile matrix set not found
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
- , %n 錯誤。
-
+ , %n 錯誤。
image is NULL
-
unexpected image size
-
Status: %1
Reason phrase: %2
-
Redirect loop detected: %1
-
Dom Exception
-
Service Exception
-
Request contains a format not offered by the server.
-
Request contains a CRS not offered by the server for one or more of the Layers in the request.
-
Request contains a SRS not offered by the server for one or more of the Layers in the request.
-
GetMap request is for a Layer not offered by the server, or GetFeatureInfo request is for a Layer not shown on the map.
-
Request is for a Layer in a Style not offered by the server.
-
GetFeatureInfo request is applied to a Layer which is not declared queryable.
-
GetFeatureInfo request contains invalid X or Y value.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is equal to current value of service metadata update sequence number.
-
Value of (optional) UpdateSequence parameter in GetCapabilities request is greater than current value of service metadata update sequence number.
-
Request does not include a sample dimension value, and the server did not declare a default value for that dimension.
-
Request contains an invalid sample dimension value.
-
Request is for an optional operation that is not supported by the server.
-
(No error code was reported)
-
(Unknown error code)
-
The WMS vendor also reported:
-
Cascade Count
-
Available in CRS
-
(and %n more)
crs
-
-
+
Available in style
-
LegendURLs
-
Server Properties
-
Fees
- 收費
+
Access Constraints
-
GetCapabilitiesUrl
-
GetMapUrl
-
<font color="red">(advertised but ignored)</font>
-
GetFeatureInfoUrl
-
GetLegendGraphic
-
GetTileUrl
-
Tile templates
-
FeatureInfo templates
-
Tileset Properties
-
Identifier
-
WMTS
-
WMS-C
-
Invalid tile mode
-
Available Styles
-
Bounding Box
-
Selected tile matrix set
-
Scale
- 比例
+
Tile size [px]
-
Tile size [mu]
-
Matrix size
-
Matrix extent [mu]
-
Bounds
-
%n missing row(s)
-
-
+
Layer's upper bound: %1
-
%n missing column(s)
-
-
+
Layer's left bound: %1
-
Layer's lower bound: %1
-
Layer's right bound: %1
-
Cache stats
-
Hits
-
Misses
-
Errors
-
Format not supported
-
Context not fully specified (extent was defined but width and/or height was not).
-
Get feature info request error (Title:%1; Error:%2; URL: %3)
-
GML schema is not valid
-
GML is not valid
-
Cannot identify
-
Result parsing failed. %1 feature types were guessed from gml (%2) but no features were parsed.
-
identify request redirected.
-
Map getfeatureinfo error %1: %2
-
Cannot parse getfeatureinfo: %1
-
Map getfeatureinfo error: %1 [%2]
-
GetLegendGraphic request redirected.
-
GetLegendGraphic request error
-
Returned legend image is flawed [URL: %1]
-
Download of GetLegendGraphic failed: %1
-
%1 of %2 bytes of GetLegendGraphic downloaded.
-
@@ -52555,18 +52333,18 @@ Response was:
Tile request error
-
Status: %1
Reason phrase: %2
-
Tile request error (Title:%1; Error:%2; URL: %3)
-
WMS
- WMS
+
Tile request error (Status:%1; Content-Type:%2; Length:%3; URL: %4)
-
Returned image is flawed [Content-Type:%1; URL: %2]
-
%n tile requests in background
tile request count
-
-
+
, %n cache hits
tile cache hits
-
-
+
, %n cache misses.
tile cache missed
-
-
+
, %n errors.
errors
-
- , %n 錯誤。
-
+
Not logging more than 100 request errors.
-
Tile request max retry error. Failed %1 requests for tile %2 of tileRequest %3 (url: %4)
-
repeat tileRequest %1 tile %2(retry %3)
-
@@ -52641,28 +52411,28 @@ Reason phrase: %2
Select dimensions
-
Dimension
-
Value
- 值
+
Abstract
- 摘要
+
Default
- 預設
+
@@ -52713,7 +52483,7 @@ Reason phrase: %2
Record Metadata
-
@@ -52774,12 +52544,12 @@ Reason phrase: %2
km/h
-
m/s
-
Cannot calculate path
-
The created graph is empty. Please check your input data.
-
SLDatabase
Run &Vacuum
-
&Database
- 資料庫(D&)
+
Sorry
- 抱歉
+
No database selected or you are not connected to it.
- 未選取資料庫或您未尚未連結資料庫。
+
+
+
+ SaDbTableModel
+
+ Schema
+
+
+ Table
+
+
+ Type
+
+
+ SRID
+
+
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
+
+
+
+ SaNewConnection
+
+ Save connection
+
+
+ Should the existing connection %1 be overwritten?
+
+
+ Failed to load interface
+
+
+ Test connection
+
+
+ Connection to %1 was successful
+
+
+ Connection failed. Check settings and try again.
+
+SQL Anywhere error code: %1
+Description: %2
+
SaNewConnectionBase
+ Create a new SQL Anywhere connection
- 建立新 SQL Anywhere連線
+ 建立新 SQL Anywhere連線
+ Connection Information
- 連接資訊
+ 連接資訊
+ Name
- 名稱
+ 名稱
+ Host
- 主機
+ 主機
+ Port
- 連接埠號
+ 連接埠號
+ Server
- 伺服器
+ 伺服器
+ Database
- 資料庫
+ 資料庫
+ Connection Parameters
- 連線參數
+ 連線參數
+ Username
- 使用者名稱
+ 使用者名稱
+ Password
- 密碼
+ 密碼
+ Name of the new connection
- 新連接的名稱
+ 新連接的名稱
+ Name or IP address of computer hosting the database server (leave blank for local connections)
+
+
+ Port number used by the database server (leave blank for default 2638)
+
+
+ Name of the database server (leave blank for default server on host)
+
+
+ Name of the database (leave blank for default database on server)
+
+
+ Additional connection parameters
+
+
+ Database username
+
+
+ Database password
+
+
+ Save the connection username in the registry
+
+
+ Save Username
+
+
+ &Test Connect
+
+
+ Save the connection password in the registry (WARNING: NOT SECURE)
+
+
+ Save Password
+
+
+ Encrypt packets using simple encryption
+
+
+ Simple Encryption
- 簡單加密
+ 簡單加密
+ Use estimates for certain layer properties such as cardinality, extent, etc. (improves performance)
+
+
+ Estimate table metadata
- 估計表格詮釋資料
+ 估計表格詮釋資料
+ Search for geometry columns in tables owned by other users
+
+
+ Search other users' tables
- 搜尋其它使用者的表格
+ 搜尋其它使用者的表格
+
+
+
+ SaSourceSelect
+
+ &Add
+
+
+ &Set Filter
+
+
+ Wildcard
+
+
+ RegExp
+
+
+ All
+
+
+ Schema
+
+
+ Table
+
+
+ Type
+
+
+ SRID
+
+
+ Line Interpretation
+
+
+ Geometry column
+
+
+ Sql
+
+
+ Are you sure you want to remove the %1 connection and all associated settings?
+
+
+ Confirm Delete
+
+
+ Select Table
+
+
+ You must select a table in order to add a layer.
+
+
+ Failed to load interface
+
+
+ Connection failed
+
+
+ Connection to database %1 failed. Check settings and try again.
+
+SQL Anywhere error code: %2
+Description: %3
+
+
+ No accessible tables found
+
+
+ Database connection was successful, but no tables containing geometry columns were %1.
+
+
+ found
+
+
+ found in your schema
+
SaSourceSelectBase
+ Add SQL Anywhere layer
+
+
+ SQL Anywhere Connections
- SQL Anywhere 連線
+ SQL Anywhere 連線
+ Delete
+
+
+ Edit
+
+
+ New
+
+
+ Connect
- 連接
+ 連接
+ Search options
- 尋找選項
+ 尋找選項
+ Search
- 尋找
+ 尋找
+ Search mode
- 搜尋模式
+ 搜尋模式
+ Search in columns
- 在欄位中尋找
+ 在欄位中尋找
+
+
+
+ SaveAsPythonScriptAction
+
+ I/O error
+
+
+ Unable to save edits. Reason:
+ %s
+
ScriptEditorDialog
Python scripts (*.py)
-
Processing R script (*.rsx)
-
Save script
-
I/O error
- I/O錯誤
+
Unable to save edits. Reason:
%s
- 無法儲存編輯。理由:
- %s
+
@@ -53131,52 +53233,52 @@ Reason phrase: %2
Select Oracle Spatial GeoRaster
-
Server Connections
-
Edit
- 編輯
+
Delete
- 刪除
+
&New
- 新增(&N)
+
C&onnect
-
Subdatasets
-
Selection
-
Update
- 更新
+
Ready
- 我準備好了
+
@@ -53184,231 +53286,231 @@ Reason phrase: %2
Editor
-
Auto-save script before running
-
Font and Colors
-
Default:
-
Keyword:
-
Class name:
-
Function:
-
Decorator:
-
Comment:
-
Comment block:
-
Cursor:
-
Caretline:
-
Single quote:
-
Double quote:
-
Triple single quote:
-
Triple double quote:
-
Background:
-
Reset to default colors
-
Typing
-
Automatic insertion of the 'import' string on 'from xxx'
-
Autocompletion
-
Get autocompletion from current document
-
from Document
-
Get autocompletion from current document and installed APIs
-
from Doc and APIs
-
Get autocompletion from installed APIs
-
from APIs files
-
Autocompletion threshold
-
Error:
-
Automatic parentheses insertion
-
Font
-
Size
- 大小
+
Enable Object Inspector (switching between tabs may be slow)
-
Console
- 主控台
+
APIs
-
Using preloaded APIs file
-
Path
- 路徑
+
Using prepared APIs file
-
Compile APIs...
-
Settings Python Console
-
@@ -53416,36 +53518,40 @@ Reason phrase: %2
Simplify line tolerance
-
Set tolerance
-
OK
- 確定
+
SqlAnywhere
+ Add SQL Anywhere Layer...
- 加入SQL Anywhere圖層...
+ 加入SQL Anywhere圖層...
+ Store vector layers within a SQL Anywhere database
- 在SQL Anywhere資料庫中儲回向量圖層
+ 在SQL Anywhere資料庫中儲回向量圖層
+ Invalid Layer
- 無效的圖層
+ 無效的圖層
+ %1 is an invalid layer and cannot be loaded.
- %1是一個無效的圖層，無法載入。
+ %1是一個無效的圖層，無法載入。
@@ -53589,15 +53695,13 @@ Reason phrase: %2
Error loading output shapefile:
%s
-
Created output shapefile:
%s
%s
- 已建立匯出的Shape檔案
-%s
-%s
+
Feature
@@ -53852,7 +53956,7 @@ Reason phrase: %2
Two color
- 雙色
+
Gradient type
-
Radial
-
Coord mode
-
Viewport
-
Spread
-
Pad
-
Repeat
- 重複
+
Reflect
-
x
-
y
-
Offset X,Y
-
@@ -53968,27 +54072,27 @@ Reason phrase: %2
Form
- 表單
+
Angle
- 角度
+
Data defined properties...
-
Distance
- 距離
+
Offset
- 偏移
+
@@ -53996,57 +54100,57 @@ Reason phrase: %2
Form
- 表單
+
Marker placement
-
with interval
-
on every vertex
-
on last vertex only
-
on first vertex only
-
Offset along line
-
Rotate marker
-
Line offset
-
Data defined properties
-
on central point
-
@@ -54054,32 +54158,32 @@ Reason phrase: %2
Form
- 表單
+
Vertical distance
- 垂直距離
+
Vertical displacement
- 垂直位移
+
Data defined properties...
-
Horizontal displacement
- 水平位移
+
Horizontal distance
- 水平距離
+
@@ -54165,22 +54269,22 @@ Reason phrase: %2
Shading style
-
Shade whole shape
-
Ignore rings in polygons while shading
-
Shade to a set distance:
-
Generated path will be relative to current SVG search directories or to Project file
-
Relative path
-
@@ -54568,12 +54672,12 @@ Reason phrase: %2
Height only
-
Polar
-
Angle units
-
Degrees
- 度
+
Radians
- 弧度
+
Clockwise from north
-
Distance unit
- 距離單位
+
@@ -54621,17 +54725,17 @@ Reason phrase: %2
XML Request / Response
-
Request
-
Response
-
@@ -54652,59 +54756,59 @@ Reason phrase: %2
Topology Checker
-
Validate All
-
Validate Extent
-
Topology not checked yet
-
Configure
-
Show topology errors
-
Show errors
-
Select automatic fix
-
Fix!
-
No errors were found
-
Invalid first layer
-
Topology plugin
-
Invalid first geometry
-
Topology test
-
Feature not found in the layer.
The layer has probably changed.
Run topology check again.
-
Invalid second layer
-
Invalid second geometry
-
Invalid conflict
-
%1 errors were found
-
Topology fix error
-
Fixing failed!
-
Layer %1 not found in registry.
-
Abort
- 放棄
+
context_help
- <h3>Database connection</h3>
-
<h3>Create a New SpatiaLite Layer</h3>
You can use this dialog to create a new SpatiaLite database and/or an empty SpatiaLite layer for editing. See below for an explanation of the dialog inputs.
<h4>Database</h4>
-Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
+Choose the database from the drop-down list. This list is created from your saved SpatiaLite connections. If you don't have a saved connection or want to create a new database, click on the button (<label>...</label>) to the right of the drop-down.
<h4>Layer name</h4>
Enter a name for the layer you want to create. The name should be one word. You can use underscores in the name if you like.
<h4>Geometry column</h4>
@@ -54914,7 +55018,7 @@ Choose the type of layer you want to create.
<h4>EPSG SRID</h4>
Enter the EPSG number for the spatial reference id (SRID). By default the SRID for WGS 84 is filled in for you. Click on <label>Find SRID</label> button to change the coordinate reference system of the layer if needed. The SRID must exist within the spatial_ref_sys in your SpatiaLite database. You can search for the SRID using partial matches on both name and SRID.
<h4>Create an auto-incrementing Primary Key</h4>
-Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
+Clicking this check box will add a primary key to the new layer. This key field will be auto-incrementing, meaning you don't have to enter a value for it when adding features to the attribute table of the layer.
<h4>New attribute</h4>
Add the desired attributes by clicking on the <label>Add to attributes list</label> button after you have specified a name and type for the attribute. Only real, integer, and string attributes are supported.<br/>
Width and precision are irrelevant in a SpatiaLite database so you do not have to specify these.
@@ -54924,7 +55028,7 @@ In this section you can see the list of attributes. To delete one of them, click
<p>
Click on <label>OK</label> to create the layer and close the dialog. Clicking <label>Apply</label> also creates the layer, but keeps the dialog open, thereby allowing you to create more similar layers. <label>Cancel</label> will close the layer without further changes.
-
<h3>GPS Plugin</h3>
-
<h3>New OGR Database Connection Dialog</h3>
-
+
+ <h3>Create a New SQL Anywhere Connection</h3>
+This dialog allows you to define the settings for a connection to a
+SQL Anywhere database.
+<p>
+<ul>
+<li> <label>Name</label> A name to identify the connection settings.
+
+<li> <label>Host</label> Name or IP address of the computer hosting the database server (leave blank for local connections).
+
+<li> <label>Port</label> IP port used by the database server (leave blank for local connections or to use default port 2638).
+
+<li> <label>Server</label> Name of the database server (leave blank for default server on host).
+
+<li> <label>Database</label> Name of the database (leave blank for default database on server).
+
+<li> <label>Connection Parameters</label> Additional parameters to add to the connection string (semi-colon delimitted list). See the SQL Anywhere documentation for a list and description of available connection parameters.
+
+<li> <label>Username</label> Database user name.
+<li> <label>Password</label> Database password.
+
+<li> <label>Save Username</label> Indicates whether to save the database user name in the connection configuration.
+
+<li> <label>Save Password</label> Indicates whether to save the database password in the connection settings. <em>Passwords are saved in <strong>clear text</strong> in the system configuration!</em>
+
+<li> <label>Simple Encryption</label> Secure the connection to the database using simple encryption.
+
+<li> <label>Estimate table metadata</label> When initializing layers, various queries may be needed to establish the characteristics of the geometries stored in the database table. When this option is checked, these queries examine only a sample of the rows, rather than the entire table. This can significantly speed up layer initialization, but may result in incorrect characterization of layers containing heterogenous types.
+
+<li> <label>Search other users' tables</label> Indicates that the layer list should be populated from all layers stored in the database. When unchecked (the default), only layers stored in tables owned by the connected user are displayed.
+
+</ul>
+
+
<h3>Style Manager</h3>
-
+
+ <h3>Add SQL Anywhere Tables</h3>
+This dialog allows you to add SQL Anywhere layers (tables with a geometry column) to the QGIS map canvas.
+<p>
+<a href="#connect">Connections</a><br/>
+<a href="#add">Adding Layers</a><br/>
+<a href="#filter">Filtering a Layer</a><br/>
+<a href="#search">Search options</a><br/>
+
+<a href="#connect">
+<h4>Connections</h4>
+</a>
+<ul>
+<li>Choose the connection to use from the drop-down box and click <label>Connect</label>.
+<li>If there are no connections, use the <label>New</label> button to create a connection.
+<li>To modify or delete the selected connection, click the <label>Edit</label> or <label>Delete</label> buttons, respectively.
+</ul>
+<a name="add">
+<h4>Adding Layers</h4>
+</a>
+To add a layer:
+<ol>
+<li>Choose the desired connection from the drop-down box.
+<li>Click <label>Connect</label>, which will populate the list of layers from the database. Options that affect how this list is populated are described in the help for the new connection dialogue box.
+
+<li>Find the layer you want to add in the list and click on it to select it.
+<li>You can select additional layers by holding down the Ctrl key and clicking.
+<li>Click <label>Add</label> to add the layer(s) to the map.
+</ol>
+<a name="filter">
+<h4>Filtering a Layer</h4>
+</a>
+To filter a layer before adding it to the map, either double click on its name or select it and click the <label>Build query</label> button. This will open the Query Builder, allowing you to build up a SQL statement to use in filtering the records.
+
+<a name="search">
+<h4>Search options</h4>
+</a>
+Ticking <label>Search options</label> enables additional options for searching in different column types and using 2 search modes: <label>Wildcard</label> or <label>RegExp</label>.
+
+
@@ -56440,7 +56622,7 @@ Developed by Paolo L. Scala, Barbara Rita Barricelli, Marco Padula
CNR, Milan Unit (Information Technology), Construction Technologies Institute.
For support send a mail to scala@itc.cnr.it
-
Error: You must select a database type
-
Error: No host name entered
-
Error: No database name entered
-
Connection to [%1.%2] established
-
Connection to [%1.%2] failed: %3
-
Error: Parse error at line %1, column %2: %3
-
Error: Unabled to open file [%1]
-
Error: Query failed: %1
-
Error: Could not create temporary file, process halted
-
Error: A database connection is not currently established
-
@@ -56595,7 +56777,7 @@ For support send a mail to scala@itc.cnr.it
Predefined Queries
-
Loads an XML file with predefined queries. Use the Open File window to locate the XML file that contains one or more predefined queries using the format described in the user guide.
-
The description of the selected query.
-
Select the predefined query you want to use from the drop-down list containing queries identified from the file loaded using the Open File icon above. To run the query you need to click on the SQL Query tab. The query will be automatically entered in the query window.
-
not connected
-
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
+</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal; text-decoration:none;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-style:italic;">Connection Status: </span></p></body></html>
-
Database Host
-
Enter the database host. If the database resides on your desktop you should enter ¨localhost¨. If you selected ¨MSAccess¨ as the database type this option will not be available.
-
Password to access the database.
-
Enter the name of the database.
-
Enter the port through which the database must be accessed if a MYSQL database is used.
-
Connect to the database using the parameters selected above. If the connection was successful a message will be displayed in the Output Console below saying the connection was established.
-
User name to access the database.
-
Select the type of database from the list of supported databases in the drop-down menu.
-
Database Name
-
Database Type
-
SQL Query
-
Run the query entered above. The status of the query will be displayed in the Output Console below.
-
Run Query
-
Enter the query you want to run in this window.
-
A window for status messages to be displayed.
-
Output Console
-
@@ -56736,37 +56918,37 @@ p, li { white-space: pre-wrap; }
Database File Selection
-
The name of the field that contains the Y coordinate of the points.
-
The name of the field that contains the X coordinate of the points.
-
Enter the name for the new layer that will be created and displayed in QGIS.
-
Y Coordinate
- Y坐標
+
X Coordinate
- X坐標
+
Name of New Layer
-
@@ -56774,17 +56956,17 @@ p, li { white-space: pre-wrap; }
Generic Event Browser
-
Field
- 欄位
+
Value
- 值
+
Warning
- 警告
+
This tool only supports vector data
- 這工具只支援向量資料
+
No active layers found
- 未找到作用中的圖層
+
Error
- 錯誤
+
Unable to connect to either the map canvas or application interface
-
An invalid feature was received during initialization
-
Event Browser - Displaying records 01 of %1
-
Attribute Contents
-
Event Browser - Displaying records %1 of %2
-
Select Application
-
All ( * )
-
@@ -56854,82 +57036,82 @@ p, li { white-space: pre-wrap; }
Display
- 顯示
+
Use the Previous button to display the previous photo when more than one photo is available for display.
-
Previous
-
Use the Next button to display the next photo when more than one photo is available for display.
-
Next
-
All of the attribute information for the point associated with the photo being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the “Configure External Applications” tab then when you double-click on the value of the field containing the path to the file the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized the attribute data will be displayed in green.
-
1
- 1
+
Image display area
-
Display area for the image.
-
Options
- 選項
+
File path
-
Attribute containing path to file
-
Use the drop-down list to select the field containing a directory path to the image. This can be an absolute or relative path.
-
If checked the path to the image will be defined appending the attribute in the field selected from the “Attribute Containing Path to Image” drop-down list to the “Base Path” defined below.
-
Path is relative
-
If checked, the relative path values will be saved for the next session.
-
Remember this
-
Reset to default
-
Resets the values on this line to the default setting.
-
Reset
- 重設
+
Compass bearing
-
Attribute containing compass bearing
-
Use the drop-down list to select the field containing the compass bearing for the image. This bearing usually references the direction the camera was pointing when the image was acquired.
-
If checked an arrow pointing in the direction defined by the attribute in the field selected from the drop-down list to the right will be displayed in the QGIS window on top of the point for this image.
-
Display compass bearing
-
If checked, the Display Compass Bearing values will be saved for the next session.
-
Compass offset
-
Define the compass offset manually.
-
Manual
- 手動
+
A value to be added to the compass bearing. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
Define the compass offset using a field from the vector layer attribute table.
-
From Attribute
-
Use the drop-down list to select the field containing the compass bearing offset. This allows you to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). East declinations should be entered using positive values and west declinations should use negative values.
-
If checked, the compass offset values will be saved for the next session.
-
Resets the compass offset values to the default settings.
-
Relative paths
-
The base path or url from which images and documents can be “relative”
-
Base Path
-
The Base Path onto which the relative path defined above will be appended.
-
If checked, the Base Path will be saved for the next session.
-
Enters the default “Base Path” which is the path to the directory of the vector layer containing the image information.
-
If checked, the Base Path will append only the file name instead of the entire relative path (defined above) to create the full directory path to the file.
-
Replace entire path/url stored in image path attribute with user defined
Base Path (i.e. keep only filename from attribute)
-
If checked, the current check-box setting will be saved for the next session.
-
Clears the check-box on this line.
-
If checked, the same path rules that are defined for images will be used for non-image documents such as movies, text documents, and sound files. If not checked the path rules will only apply to images and other documents will ignore the Base Path parameter.
-
Apply Path to Image rules when loading docs in external applications
-
Clicking on Save will save the settings without closing the Options pane. Clicking on Restore Defaults will reset all of the fields to their default settings. It has the same effect as clicking all of the “Reset to default” buttons.
-
Configure External Applications
-
File extension and external application in which to load a document of that type
-
A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recording, and text documents instead of only images.
-
Extension
-
Application
- 應用設定
+
Add new file type
-
Add a new file type with a unique extension and the path for the application that can open the file.
-
Delete current row
-
Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.
-
@@ -57162,32 +57344,32 @@ Base Path (i.e. keep only filename from attribute)
Zoom in
- 放大
+
Zoom in to see more detail.
-
Zoom out
- 縮小
+
Zoom out to see more area.
-
Zoom to full extent
-
Zoom to display the entire image.
-
@@ -57390,7 +57572,7 @@ Plugin will not be enabled.
function_help
- <h3>week() function</h3>
Extract the week number from a date, or the number of weeks
from a <code>Interval</code>
@@ -57406,1857 +57588,12 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>week('2012-05-12') → 19</code><br>
-<code>week(tointerval('3 weeks')) → 3</code><br>
-<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
+<code>week('2012-05-12') → 19</code><br>
+<code>week(tointerval('3 weeks')) → 3</code><br>
+<code>week(age('2012-01-01','2010-01-01')) → 104.285...</code><br>
-
-
- <h3>CASE expression</h3>
-A conditional expression that can be used to evaluate multiple expressions and
-return a result.
-
-<h4>Syntax</h4>
-<pre>
- CASE
- WHEN <i>condition</i> THEN <i>result</i>
- [ ...n ]
- [ ELSE <i>result</i> ]
- END
-</pre>
-[ ] marks optional components
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> WHEN condition</i> - The condition expression to evaluate. <br>
-<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
-<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>
- CASE
- WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
- ELSE <i>"column"</i>
- END
-</pre>
-
-
-
- <h3>right() function</h3>
-Returns a substring that contains the <i>n</i> rightmost characters of the string.
-
-<h4>Syntax</h4>
-<code>right(string, pos)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the right to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>right('Hello World',5) → 'World'</code><br>
-
-
-
-
-
-<h3>Color Group</h3>
-This group contains functions for manipulating colors
-
-
-
- <h3>length() function</h3>
-Returns the length of a string.
-
-<p><h4>Syntax</h4>
- length(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to count the length of.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- length('HELLO') → 5</p>
-
-
-
- <h3>upper() function</h3>
-Converts a string to upper case letters.
-
-<p><h4>Syntax</h4>
- upper(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to upper case.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- upper('hello WOrld') → 'HELLO WORLD'</p>
-
-
-
- <h3>bbox function</h3>
-Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>bbox( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
-
-
-
- <h3>left() function</h3>
-Returns a substring that contains the <i>n</i> leftmost characters of the string.
-
-<h4>Syntax</h4>
-<code>left(string, length)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The number of characters from the left to return.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>left('Hello World',5) → 'Hello'</code><br>
-
-
-
-
- <h3>$scale function</h3>
-Returns the current scale of the map canvas.
-<br>
-Note: This function is only available in some contexts and will be 0 otherwise.
-<h4>Syntax</h4>
-<code>$scale</code><br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>$scale → 10000</code><br>
-
-
-
-
-
- <h3>ceil() function</h3>
-Rounds a number upwards.
-
-<h4>Syntax</h4>
-<code>ceil(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>ceil(4.9) → 5</code><br>
-<code>ceil(-4.9) → -4</code><br>
-
-
-
- <h3>toreal() function</h3>
-Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
-
-<p><h4>Syntax</h4>
- toreal(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to real number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toreal('123.45') → 123.45</p>
-
-
-
- <h3>xat() function</h3>
-Retrieves a x coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>xat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>xat(1) → 5</pre>
-
-
-
- <h3>$numpages function</h3>
-Returns the total number of pages in the composition.
-
-<h4>Syntax</h4>
-<pre>$numpages</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$numpages → 42</pre>
-
-
-
-
- <h3>strpos() function</h3>
-Return the index of a regular expression in a string.
-
-<h4>Syntax</h4>
- strpos(<i>haystack</i>, <i>needle</i>)
-<br><br>
-Returns -1 if the expression isn't found.
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> haystack</i> → is string. The string that is to be searched.<br>
-<i> needle</i> → is string. The regular expression to look for.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- strpos('HELLO WORLD','WORLD') → 6<br>
- strpos('HELLO WORLD','GOODBYE') → -1<br>
-
-
-
- <h3>rand() function</h3>
-Returns a random integer within the range specified by the minimum and
-maximum argument (inclusive).
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>rand(min, max)</code><br>
-
-<h4>Arguments</h4>
-<code>min</code> - an integer representing the smallest possible random number desired.<br>
-<code>max</code> - an integer representing the largest possible random number desired.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rand(1, 10) → 8</code><br>
-
-
-
- <h3>$atlasgeometry function</h3>
-Returns the geometry of the current feature iterated in atlas.
-Can be used for rule based display of geometry when using atlas.
-For example to only show geometries of other layers when their geometry
-intersects the iterated geometry of features using atlas.
-
-<h4>Syntax</h4>
-<pre>$atlasgeometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> intersects( $atlasgeometry, $geometry ) </pre>
-
-
-
-
- <h3>$atlasfeatureid function</h3>
-Returns the feature id of the current row while using atlas.
-This enables you to use features of atlas in rules
-and for example show or hide features based on their id.
-
-<h4>Syntax</h4>
-<pre>$atlasfeatureid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$atlasfeatureid = $id</pre>
-
-
-
-
- <h3>bounds_width function</h3>
-Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_width(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
-
-
-
-
- <h3>floor() function</h3>
-Rounds a number downwards.
-
-<h4>Syntax</h4>
-<code>floor(value)</code><br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>floor(4.9) → 4</code><br>
-<code>floor(-4.9) → -5</code><br>
-
-
-
- <h3>bounds_height function</h3>
-Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds_height(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
-
-
-
-
- <h3>toint() function</h3>
-Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
-
-<p><h4>Syntax</h4>
- toint(<i>string</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The String to convert to integer number.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- toint('123') → 123</p>
-
-
-
- <h3>yat() function</h3>
-Retrieves a y coordinate of the current feature
-
-<h4>Syntax</h4>
-<code>yat(i)</code>
-
-<h4>Arguments</h4>
-<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
-
-<h4>Example</h4>
-<pre>yat(1) → 5</pre>
-
-
-
- <h3>tostring() function</h3>
-Converts a number to string.
-
-<p><h4>Syntax</h4>
- tostring(<i>number</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i>number</i> → is integer or real. The number to convert to string.</p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- tostring(123) → '123'</p>
-
-
-
- <h3>$rownum function</h3>
-Returns the number of the current row.
-
-<h4>Syntax</h4>
-<pre>$rownum</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$rownum → 4711</pre>
-
-
-
-
- <h3>atan2() function</h3>
-Returns arcustangens of y/x using the signs of the two
-arguments to determine the quadrant of the result
-
-
-
-<p><h4>Syntax</h4>
- atan2(<i>real</i>, <i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → y coordinate difference<br>
-<i>real</i> → x coordinate difference</p>
-
-<p><h4>Example</h4>
- atan2(1.0, 1.732) → 0.523611477769969</p>
-
-
-
- <h3>sin() function</h3>
-Returns sinus of an angle.
-
-
-<p><h4>Syntax</h4>
- sin(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → angle in radians.</p>
-
-<p><h4>Example</h4>
- sin(1.571) → 0.999999682931835</p>
-
-
-
- <h3>month() function</h3>
-Extract the month part from a date, or the number of months
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>month(date)</code><br>
-<code>month(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the month from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of months from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>month('2012-05-12') → 05</code><br>
-<code>month(tointerval('3 months')) → 3</code><br>
-<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
-
-
-
-
- <h3>$area function</h3>
-Returns the area size of the current feature.
-
-<h4>Syntax</h4>
-<pre>$area</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$area → 42</pre>
-
-
-
-
- <h3>day() function</h3>
-Extract the day from a date, or the number of days
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>day(date)</code><br>
-<code>day(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the day from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of days from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>day('2012-05-12') → 12</code><br>
-<code>day(tointerval('3 days')) → 3</code><br>
-<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
-
-
-
-
- <h3>todate() function</h3>
-Convert a string into Qt data type.
-
-<h4>Syntax</h4>
-<code>todate('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt date format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todate('2012-05-04') → 2012-05-04</code><br>
-
-
- <h3>lpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>lpad(string, length, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>length</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
-
-
-
- <h3>acos() function</h3>
-Returns arcuscosinus of a value in radians.
-
-
-<p><h4>Syntax</h4>
- acos(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → cos of an angle.</p>
-
-<p><h4>Example</h4>
- acos(0.5) → 1.0471975511966</p>
-
-
-
- <h3>Fields and Values</h3>
-Contains a list of fields from the layer. Sample values can also be accessed via right-click.
-<br><br>
-Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>log() function</h3>
-Returns the value of the logarithm of the passed value and base.
-<br>
-This function takes two arguments.
-<h4>Syntax</h4>
-<code>log(base, value)</code><br>
-
-<h4>Arguments</h4>
-<code>base</code> - any positive number.<br>
-<code>value</code> - any positive number.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>log(2, 32) → 5</code><br>
-<code>log(0.5, 32) → -5</code><br>
-
-
-
- <h3>Geometry Group</h3>
-This group contains functions that operate on geometry objects e.g length, area.
-
-
-
- <h3>Field</h3>
-Double click to add field name to expression string.
-<br><br>
-Right-Click on field name to open context menu sample value loading options.
-
-<p><h4>Note:</h4>
-Loading field values from WFS layers isn't supported, before the layer is
-actually inserted, ie. when building queries.
-</p>
-
-
-
- <h3>$page function</h3>
-Returns the current page number within a composition.
-
-<h4>Syntax</h4>
-<pre>$page</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$page → 2</pre>
-
-
-
-
- <h3>exp() function</h3>
-Returns exponential of an value.
-
-
-<p><h4>Syntax</h4>
- exp(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- exp(1.0) → 2.71828182845905</p>
-
-
-
- <h3>rpad() function</h3>
-Returns a string with supplied width padded
-using the fill character.
-
-<h4>Syntax</h4>
-<code>rpad(string, width, fill)</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. The string.
-<br>
-<code>width</code> - is int. The length of the new string.
-<br>
-<code>fill</code> - is char. The character to padd the remaining space with.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
-
-
-
-
- <h3>round() function</h3>
-Rounds a number to number of decimal places.
-<br>
-This function can take one or two arguments depending on what is needed.
-<h4>Syntax</h4>
-<code>round(decimal,places)</code><br>
-<code>round(decimal)</code><br>
-
-<h4>Arguments</h4>
-<code>decimal</code> - is decimal. The decimal number to be rounded.
-<br>
-<code>places</code> - is int. The number of places to round decimal too. Can be negative.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>round(1234.567, 2 ) → 1234.57</code><br>
-use <code>round(decimal)</code> to round to the nearest integer<br>
-<code>round(1234.567) → 1235</code><br>
-
-
-
-
-
- <h3>$now function</h3>
-Returns the current date and time
-
-<h4>Syntax</h4>
-<pre>$now</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$now → 2012-07-22T13:24:57</pre>
-
-
-
-
- <h3>color_hsl() function</h3>
-Returns a string representation of a color based on its hue, saturation, and lightness attributes
-
-<p><h4>Syntax</h4>
- color_hsl(<i>hue, saturation, lightness</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsl(100,50,70) → '166,217,140'</p>
-
-
-
- <h3>scale_exp() function</h3>
-Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
-of the specified output range.
-
-<p><h4>Syntax</h4>
- scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
-<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
-<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
-<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
-accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<b>Easing in, using an exponent of 2:</b><br>
- scale_exp(5,0,10,0,100,2) → 25<br>
- scale_exp(7.5,0,10,0,100,2) → 56.25<br>
- scale_exp(9.5,0,10,0,100,2) → 90.25<br>
- <br>
-<b>Easing out, using an exponent of 0.5:</b><br>
- scale_exp(3,0,10,0,100,0.5) → 54.772<br>
- scale_exp(6,0,10,0,100,0.5) → 77.459<br>
- scale_exp(9,0,10,0,100,0.5) → 94.868<br>
-
-
-
-
-
- <h3>convexHull function</h3>
-Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
-
-<h4>Syntax</h4>
-<pre>convexHull( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
-
-
-
- <h3>union function</h3>
-Returns a geometry that represents the point set union of the geometries.
-
-<h4>Syntax</h4>
-<pre>union( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
-
-
-
- <h3>xmax function</h3>
-Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>xmax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
-
-
-
-
- <h3>bounds function</h3>
-Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>bounds(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> bounds($geometry) → returns bounding box of $geometry</pre>
-
-
-
-
- <h3>ymax function</h3>
-Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymax(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
-
-
-
-
- <h3>contains function</h3>
-Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
-
-<h4>Syntax</h4>
-<pre>contains( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
-<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>wordwrap() function</h3>
-Returns a string wrapped to a maximum/minimum number of characters.
-
-<p><h4>Syntax</h4>
- wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The string to be wrapped.<br>
-<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
-<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
- wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
-
-
-
-
-<h3>color_rgb() function</h3>
-Returns a string representation of a color based on its red, green, and blue components
-
-<p><h4>Syntax</h4>
- color_rgb(<i>red, green, blue</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> red</i> → the red component as an integer value from 0 to 255.<br>
-<i> green</i> → the green component as an integer value from 0 to 255.<br>
-<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_rgb(255,127,0) → '255,127,0'</p>
-
-
-
-
-<h3>color_cmyk() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow and black components
-
-<p><h4>Syntax</h4>
- color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyk(100,50,0,10) → '0,115,230'</p>
-
-
-
- <h3>intersection function</h3>
-Returns a geometry that represents the shared portion of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>intersection( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
-
-
-
-
-<h3>ramp_color() function</h3>
-Returns a string representing a color from a color ramp.
-
-<p><h4>Syntax</h4>
- ramp_color(<i>ramp_name,value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
-<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- ramp_color('Spectral',0.3) → '253,190,115,255'</p>
-
-<p><h4>Note:</h4>
-The color ramps available vary between QGIS installations. This function
-may not give the expected results if you move your Quantum project.
-</p>
-
-
-
- <h3>IS expression</h3>
-Returns 1 if a is the same as b.
-
-<h4>Syntax</h4>
-<pre>a IS b</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' IS 'A' → returns 1 </pre>
-<pre> 'A' IS 'a' → returns 0 </pre>
-<pre> 4 IS 4 → returns 1 </pre>
-<pre> 4 IS 2+2 → returns 1 </pre>
-<pre> 4 IS 2 → returns 0 </pre>
-<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
-
-
-
-
- <h3>color_hsv() function</h3>
-Returns a string representation of a color based on its hue, saturation, and value attributes
-
-<p><h4>Syntax</h4>
- color_hsv(<i>hue, saturation, value</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsv(40,100,100) → '255,170,0'</p>
-
-
-
- <h3>ILIKE expression</h3>
-Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number ILIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' ILIKE 'A' → returns 1 </pre>
-<pre> 'A' ILIKE 'a' → returns 1 </pre>
-<pre> 'A' ILIKE 'B' → returns 0 </pre>
-
-
-
- <h3>LIKE expression</h3>
-Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
-
-<h4>Syntax</h4>
-<pre>string/number LIKE pattern</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'A' LIKE 'A' → returns 1 </pre>
-<pre> 'A' LIKE 'a' → returns 0 </pre>
-<pre> 'A' LIKE 'B' → returns 0 </pre>
-
-
-
- <h3>ymin function</h3>
-Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>ymin(geom)</pre>
-
-<h4>Arguments</h4>
-geom → a geometry
-
-<h4>Example</h4>
-<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
-
-
-
-
- <h3>geomFromGML function</h3>
-Returns a geometry from a GML representation of geometry
-
-<h4>Syntax</h4>
-<pre>geomFromGML(text)</pre>
-
-<h4>Arguments</h4>
-text → GML representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
-
-
-
-
- <h3>Date and Time Group</h3>
-This group contains functions for handling date and time data.
-
-
-
- <h3>combine function</h3>
-Returns the combination of geometry a and geometry b.
-
-<h4>Syntax</h4>
-<pre>combine( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
-<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
-
-
-
- <h3>intersects function</h3>
-Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
-
-<h4>Syntax</h4>
-<pre>intersects( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>clamp() function</h3>
-Restricts an input value to a specified range.
-
-<p><h4>Syntax</h4>
- clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
-<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
-<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
- clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
- clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
-
-
-
-
-
- <h3>disjoint function</h3>
-Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
-
-<h4>Syntax</h4>
-<pre>disjoint( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
-
-
-
- <h3>geomFromWKT function</h3>
-Returns a geometry created from a Well-Known Text (WKT) representation.
-
-<h4>Syntax</h4>
-<pre>geomFromWKT(text)</pre>
-
-<h4>Arguments</h4>
-text → Well-Known Text (WKT) representation of a geometry
-
-<h4>Example</h4>
-<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
-
-
-
-
- <h3>buffer function</h3>
-Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
-
-<h4>Syntax</h4>
-<pre>buffer(a, b)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → distance for the buffer
-
-<h4>Example</h4>
-<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
-
-
-
-
- <h3>$atlasfeature function</h3>
-In atlas generation, returns the current feature that is iterated over on the coverage layer. This can be used with the 'attribute' function
-to return attribute values from the current atlas feature.
-
-<h4>Syntax</h4>
-<pre>$atlasfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $atlasfeature, 'name' ) → returns value stored in 'name' attribute for the current atlas feature</pre>
-
-
-
-
- <h3>$currentfeature function</h3>
-Returns the current feature being evaluated. This can be used with the 'attribute' function
-to evaluate attribute values from the current feature.
-
-<h4>Syntax</h4>
-<pre>$currentfeature</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>$id function</h3>
-Returns the feature id of the current row.
-
-<h4>Syntax</h4>
-<pre>$id</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$id → 42</pre>
-
-
-
-
- <h3>$uuid function</h3>
-Generates a Universally Unique Identifier (UUID) for each row using the Qt
-<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
-method. Each UUID is 38 characters long.
-
-<h4>Syntax</h4>
-<pre>$uuid</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
-
-
-
- <h3>attribute function</h3>
-Returns the value of a specified attribute from a feature.
-
-<h4>Syntax</h4>
-<pre>attribute( feature, attribute_name )</pre>
-
-<h4>Arguments</h4>
-feature → a feature<br />
-attribute_name → name of attribute to be returned
-
-<h4>Example</h4>
-<pre>attribute( $currentfeature, 'name' ) → returns value stored in 'name' attribute for the current feature</pre>
-
-
-
-
- <h3>crosses function</h3>
-Returns 1 if the supplied geometries have some, but not all, interior points in common.
-
-<h4>Syntax</h4>
-<pre>crosses( $geometry , $geometry)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>geomToWKT function</h3>
-Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
-
-<h4>Syntax</h4>
-<pre>geomToWKT(a)</pre>
-
-<h4>Arguments</h4>
-a → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
- <h3>touches function</h3>
-Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
-
-<h4>Syntax</h4>
-<pre>touches( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
-
-
-
- <h3>overlaps function</h3>
-Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
-
-<h4>Syntax</h4>
-<pre>overlaps( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
-<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
-
-
-
- <h3>AND logical operator</h3>
-Returns 1 when condition a and b are true.
-
-<h4>Syntax</h4>
-<pre> condition a AND condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
-
-
-
-
- <h3>$geometry function</h3>
-Returns the geometry of the current feature. Can be used for processing with other functions.
-
-<h4>Syntax</h4>
-<pre>$geometry</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
-
-
-
-
- <h3>OR logical operator</h3>
-Returns 1 when condition a or b is true.
-
-<h4>Syntax</h4>
-<pre> condition a OR condition b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
-<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
-<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
-
-
-
- <h3>centroid function</h3>
-Returns the geometric center of a geometry.
-
-<h4>Syntax</h4>
-<pre>centroid(a)</pre>
-
-<h4>Arguments</h4>
-b → geometry
-
-<h4>Example</h4>
-<pre> centroid($geometry) → returns a point geometry</pre>
-
-
-
-
- <h3>within function</h3>
-Returns 1 if the geometry a is completely inside geometry b
-
-<h4>Syntax</h4>
-<pre>within( geometry a , geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
-<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
-
-
-
- <h3>$map function</h3>
-Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
-drawn within the main QGIS window.
-
-<h4>Syntax</h4>
-<pre>$map</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<pre>$map → "overview_map" (within a composer item)<br />
-$map → "canvas" (within the main QGIS main canvas)</pre>
-
-
-
-
-
- <h3>distance function</h3>
- Returns the minimum distance (based on spatial ref) between two geometries in projected units.
-
-<h4>Syntax</h4>
-<pre>distance( a, b )</pre>
-
-<h4>Arguments</h4>
-a → geometry
-b → geometry
-
-<h4>Example</h4>
-<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
-
-
-
- <h3>difference function</h3>
-Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
-
-<h4>Syntax</h4>
-<pre>difference( a, b )</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
-
-
-
- <h3>NOT</h3>
-Returns 1 if a is not the same as b.
-
-<h4>Syntax</h4>
-<pre> a NOT b </pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre> 'a' IS NOT 'b' → returns 1 </pre>
-<pre> 'a' IS NOT 'a' → returns 0 </pre>
-<pre> 4 IS NOT 2+2 → returns 0 </pre>
-
-
-
-
- <h3>symDifference function</h3>
-Returns a geometry that represents the portions of a and b that do not intersect.
-
-<h4>Syntax</h4>
-<pre>symDifference( geometry a, geometry b)</pre>
-
-<h4>Arguments</h4>
-geometry → geometry
-geometry → geometry
-
-<h4>Example</h4>
-<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
-
-
-
- <h3>$perimeter function</h3>
-Returns the perimeter length of the current feature.
-
-<h4>Syntax</h4>
-<pre>$perimeter</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$perimeter → 42</pre>
-
-
-
-
- <h3>tointerval() function</h3>
-Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
-
-<h4>Syntax</h4>
-<code>tointerval('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string. Format {n} days {n} hours {n} months
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
-
-
- <h3>hour() function</h3>
-Extract the hour from a datetime or time, or the number of hours
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>hour(datetime)</code><br>
-<code>hour(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is datetime or time. The date to extract the hour from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of hours from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>hour('2012-07-22T13:24:57') → 13</code><br>
-<code>hour(tointerval('3 hours')) → 3</code><br>
-<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
-<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
-
-
-
-
- <h3>color_hsla() function</h3>
-Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
-
-<p><h4>Syntax</h4>
- color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
-<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
-<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_hsla(100,50,70,200) → '166,217,140,200'</p>
-
-
-
- <h3>$pi constant</h3>
-Returns pi as value for calculations
-
-<h4>Syntax</h4>
-<pre>$pi</pre>
-
-<h4>Arguments</h4>
-None
-
-<h4>Example</h4>
-<pre>$pi → 3.14159265358979</pre>
-
-
-
- <h3>Record Group</h3>
-This group contains functions that operate on record identifiers.
-
-
-
- <h3>totime() function</h3>
-Convert a string into Qt time type.
-
-<h4>Syntax</h4>
-<code>totime('string')</code><br>
-
-<h4>Arguments</h4>
-<code>string</code> - is string in Qt time format.
-<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>totime('12:30:01') → 12:30:01</code><br>
-
-
- <h3>replace() function</h3>
-Returns a string with the the supplied string replaced.
-
-<p><h4>Syntax</h4>
- replace(<i>string,before,after</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> string</i> → is string. The start string.<br>
-<i> before</i> → is string. The string to replace.<br>
-<i> after</i> → is string. The string that will replace <i>before</i><br></p>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
-
-
-
- <h3>Conditionals Group</h3>
-This group contains functions to handle conditional checks in expressions.
-
-
-
- <h3>abs() function</h3>
-Returns the absolute value of a number.<br>
-
-
-<h4>Syntax</h4>
-abs(<i>value</i>)<br>
-
-<h4>Arguments</h4>
-<code>value</code> - a number.<br>
-
-<h4>Example</h4>
-<code>abs(-2) → 2</code><br>
-
-
-
- <h3>max() function</h3>
-Returns the largest value in a set of values.
-
-<h4>Syntax</h4>
- max(<i>value<i>[,<i>value</i>...])
-
-<h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> value</i> → a number.<br>
-
-<h4>Example</h4>
-<!-- Show example of function.-->
- max(2,10.2,5.5) → 10.2
-
-
-
- <h3>sqrt() function</h3>
-Returns square root of a value
-
-
-<p><h4>Syntax</h4>
- sqrt(<i>real</i>)</p>
-
-<p><h4>Arguments</h4>
-<i>real</i> → number.</p>
-
-<p><h4>Example</h4>
- sqrt(9) → 3</p>
-
-
-
- <h3>Conditions Group</h3>
-This group contains functions that operate on condition.
-
-
-
-
-<h3>color_cmyka() function</h3>
-Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
-
-<p><h4>Syntax</h4>
- color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
-
-<p><h4>Arguments</h4>
-<!-- List args for functions here-->
-<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
-<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
-<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
-<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
-<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
-
-<p><h4>Example</h4>
-<!-- Show example of function.-->
- color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
-
-
-
- <h3>format_number() function</h3>
-Returns a number formatted with the locale separator for thousands.
-Also truncates the number to the number of supplied places.
-<h4>Syntax</h4>
-<code>format_number(number,places)</code><br>
-
-<h4>Arguments</h4>
-<code>number</code> - is number. The number to be formatted.
-<br>
-<code>places</code> - is int. The number of decimal places to truncate the string
-to.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>format_number(10000000.332,2) → 10,000,000.33</code>
-
-
-
-
- <h3>year() function</h3>
-Extract the year part from a date, or the number of years
-from a <code>Interval</code>
-
-<h4>Syntax</h4>
-<code>year(date)</code><br>
-<code>year(Interval)</code><br>
-
-<h4>Arguments</h4>
-<code>date</code> - is date or datetime. The date to extract the year from.
-<br>
-<code>Interval</code> - is Interval. The Interval to return the number of years from.
-
-<h4>Example</h4>
-<!-- Show example of function.-->
-<code>year('2012-05-12') → 2012</code><br>
-<code>year(tointerval('3 Years')) → 3</code><br>
-<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
-
-
-
- <h3>right() function</h3>
+Returns a substring that contains the <i>n</i> rightmost characters of the string.
+
+<h4>Syntax</h4>
+<code>right(string, pos)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the right to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>right('Hello World',5) → 'World'</code><br>
+
+
+
+
+
+<h3>Color Group</h3>
+This group contains functions for manipulating colors
+
+
+
+ <h3>length() function</h3>
+Returns the length of a string.
+
+<p><h4>Syntax</h4>
+ length(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to count the length of.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ length('HELLO') → 5</p>
+
+
+
+ <h3>upper() function</h3>
+Converts a string to upper case letters.
+
+<p><h4>Syntax</h4>
+ upper(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to upper case.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ upper('hello WOrld') → 'HELLO WORLD'</p>
+
+
+
+ <h3>bbox function</h3>
+Returns 1 if the geometries spatially intersect the bounding box defined and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>bbox( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre>bbox( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre>bbox( geomFromWKT( 'POINT(6 5)' ) , geomFromWKT( 'POLYGON((3 3 , 4 4 , 5 5, 3 3))' )) → returns 0</pre>
+
+
+
+ <h3>left() function</h3>
+Returns a substring that contains the <i>n</i> leftmost characters of the string.
+
+<h4>Syntax</h4>
+<code>left(string, length)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The number of characters from the left to return.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>left('Hello World',5) → 'Hello'</code><br>
+
+
+
+
+ <h3>$scale function</h3>
+Returns the current scale of the map canvas.
+<br>
+Note: This function is only available in some contexts and will be 0 otherwise.
+<h4>Syntax</h4>
+<code>$scale</code><br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>$scale → 10000</code><br>
+
+
+
+
+
+ <h3>ceil() function</h3>
+Rounds a number upwards.
+
+<h4>Syntax</h4>
+<code>ceil(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>ceil(4.9) → 5</code><br>
+<code>ceil(-4.9) → -4</code><br>
+
+
+
+ <h3>toreal() function</h3>
+Converts a string to real number. Nothing changed if a value cannot be converted to real (e.g '123.56asd' is invalid). Numbers are rounded after saving changes if the precision is smaller than the result of the conversion.
+
+<p><h4>Syntax</h4>
+ toreal(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to real number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toreal('123.45') → 123.45</p>
+
+
+
+ <h3>xat() function</h3>
+Retrieves a x coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>xat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>xat(1) → 5</pre>
+
+
+
+ <h3>$numpages function</h3>
+Returns the total number of pages in the composition.
+
+<h4>Syntax</h4>
+<pre>$numpages</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$numpages → 42</pre>
+
+
+
+
+ <h3>strpos() function</h3>
+Return the index of a regular expression in a string.
+
+<h4>Syntax</h4>
+ strpos(<i>haystack</i>, <i>needle</i>)
+<br><br>
+Returns -1 if the expression isn't found.
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> haystack</i> → is string. The string that is to be searched.<br>
+<i> needle</i> → is string. The regular expression to look for.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ strpos('HELLO WORLD','WORLD') → 6<br>
+ strpos('HELLO WORLD','GOODBYE') → -1<br>
+
+
+
+ <h3>rand() function</h3>
+Returns a random integer within the range specified by the minimum and
+maximum argument (inclusive).
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>rand(min, max)</code><br>
+
+<h4>Arguments</h4>
+<code>min</code> - an integer representing the smallest possible random number desired.<br>
+<code>max</code> - an integer representing the largest possible random number desired.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rand(1, 10) → 8</code><br>
+
+
+
+ <h3>$atlasgeometry function</h3>
+Returns the geometry of the current feature iterated in atlas.
+Can be used for rule based display of geometry when using atlas.
+For example to only show geometries of other layers when their geometry
+intersects the iterated geometry of features using atlas.
+
+<h4>Syntax</h4>
+<pre>$atlasgeometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> intersects( $atlasgeometry, $geometry ) </pre>
+
+
+
+
+ <h3>$atlasfeatureid function</h3>
+Returns the feature id of the current row while using atlas.
+This enables you to use features of atlas in rules
+and for example show or hide features based on their id.
+
+<h4>Syntax</h4>
+<pre>$atlasfeatureid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$atlasfeatureid = $id</pre>
+
+
+
+
+ <h3>bounds_width function</h3>
+Returns the width of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_width(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_width($geometry) → returns width of bounding box of $geometry</pre>
+
+
+
+
+ <h3>floor() function</h3>
+Rounds a number downwards.
+
+<h4>Syntax</h4>
+<code>floor(value)</code><br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>floor(4.9) → 4</code><br>
+<code>floor(-4.9) → -5</code><br>
+
+
+
+ <h3>bounds_height function</h3>
+Returns the height of the bounding box of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds_height(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds_height($geometry) → returns height of bounding box of $geometry</pre>
+
+
+
+
+ <h3>toint() function</h3>
+Converts a string to integer number. Nothing changed if a value cannot be converted to integer (e.g '123asd' is invalid).
+
+<p><h4>Syntax</h4>
+ toint(<i>string</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The String to convert to integer number.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ toint('123') → 123</p>
+
+
+
+ <h3>yat() function</h3>
+Retrieves a y coordinate of the current feature
+
+<h4>Syntax</h4>
+<code>yat(i)</code>
+
+<h4>Arguments</h4>
+<code>i<code> - is int. index of point of a line (indices start at 0; negative values apply to the last index).
+
+<h4>Example</h4>
+<pre>yat(1) → 5</pre>
+
+
+
+ <h3>tostring() function</h3>
+Converts a number to string.
+
+<p><h4>Syntax</h4>
+ tostring(<i>number</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i>number</i> → is integer or real. The number to convert to string.</p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ tostring(123) → '123'</p>
+
+
+
+ <h3>$rownum function</h3>
+Returns the number of the current row.
+
+<h4>Syntax</h4>
+<pre>$rownum</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$rownum → 4711</pre>
+
+
+
+
+ <h3>atan2() function</h3>
+Returns arcustangens of y/x using the signs of the two
+arguments to determine the quadrant of the result
+
+
+
+<p><h4>Syntax</h4>
+ atan2(<i>real</i>, <i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → y coordinate difference<br>
+<i>real</i> → x coordinate difference</p>
+
+<p><h4>Example</h4>
+ atan2(1.0, 1.732) → 0.523611477769969</p>
+
+
+
+ <h3>sin() function</h3>
+Returns sinus of an angle.
+
+
+<p><h4>Syntax</h4>
+ sin(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → angle in radians.</p>
+
+<p><h4>Example</h4>
+ sin(1.571) → 0.999999682931835</p>
+
+
+
+ <h3>month() function</h3>
+Extract the month part from a date, or the number of months
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>month(date)</code><br>
+<code>month(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the month from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of months from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>month('2012-05-12') → 05</code><br>
+<code>month(tointerval('3 months')) → 3</code><br>
+<code>month(age('2012-01-01','2010-01-01')) → 4.033...</code><br>
+
+
+
+
+ <h3>$area function</h3>
+Returns the area size of the current feature.
+
+<h4>Syntax</h4>
+<pre>$area</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$area → 42</pre>
+
+
+
+
+ <h3>day() function</h3>
+Extract the day from a date, or the number of days
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>day(date)</code><br>
+<code>day(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the day from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of days from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>day('2012-05-12') → 12</code><br>
+<code>day(tointerval('3 days')) → 3</code><br>
+<code>day(age('2012-01-01','2010-01-01')) → 730</code><br>
+
+
+
+
+ <h3>todate() function</h3>
+Convert a string into Qt data type.
+
+<h4>Syntax</h4>
+<code>todate('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt date format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todate('2012-05-04') → 2012-05-04</code><br>
+
+
+ <h3>lpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>lpad(string, length, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>length</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>lpad('Hello', 10, 'x') → 'Helloxxxxx'</code><br>
+
+
+
+ <h3>acos() function</h3>
+Returns arcuscosinus of a value in radians.
+
+
+<p><h4>Syntax</h4>
+ acos(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → cos of an angle.</p>
+
+<p><h4>Example</h4>
+ acos(0.5) → 1.0471975511966</p>
+
+
+
+ <h3>Fields and Values</h3>
+Contains a list of fields from the layer. Sample values can also be accessed via right-click.
+<br><br>
+Select the field name from the list then right-click to access context menu with options to load sample values from the selected field.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>log() function</h3>
+Returns the value of the logarithm of the passed value and base.
+<br>
+This function takes two arguments.
+<h4>Syntax</h4>
+<code>log(base, value)</code><br>
+
+<h4>Arguments</h4>
+<code>base</code> - any positive number.<br>
+<code>value</code> - any positive number.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>log(2, 32) → 5</code><br>
+<code>log(0.5, 32) → -5</code><br>
+
+
+
+ <h3>Geometry Group</h3>
+This group contains functions that operate on geometry objects e.g length, area.
+
+
+
+ <h3>Field</h3>
+Double click to add field name to expression string.
+<br><br>
+Right-Click on field name to open context menu sample value loading options.
+
+<p><h4>Note:</h4>
+Loading field values from WFS layers isn't supported, before the layer is
+actually inserted, ie. when building queries.
+</p>
+
+
+
+ <h3>$page function</h3>
+Returns the current page number within a composition.
+
+<h4>Syntax</h4>
+<pre>$page</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$page → 2</pre>
+
+
+
+
+ <h3>exp() function</h3>
+Returns exponential of an value.
+
+
+<p><h4>Syntax</h4>
+ exp(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ exp(1.0) → 2.71828182845905</p>
+
+
+
+ <h3>rpad() function</h3>
+Returns a string with supplied width padded
+using the fill character.
+
+<h4>Syntax</h4>
+<code>rpad(string, width, fill)</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. The string.
+<br>
+<code>width</code> - is int. The length of the new string.
+<br>
+<code>fill</code> - is char. The character to padd the remaining space with.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>rpad('Hello', 10, 'x') → 'xxxxxHello'</code><br>
+
+
+
+
+ <h3>round() function</h3>
+Rounds a number to number of decimal places.
+<br>
+This function can take one or two arguments depending on what is needed.
+<h4>Syntax</h4>
+<code>round(decimal,places)</code><br>
+<code>round(decimal)</code><br>
+
+<h4>Arguments</h4>
+<code>decimal</code> - is decimal. The decimal number to be rounded.
+<br>
+<code>places</code> - is int. The number of places to round decimal too. Can be negative.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>round(1234.567, 2 ) → 1234.57</code><br>
+use <code>round(decimal)</code> to round to the nearest integer<br>
+<code>round(1234.567) → 1235</code><br>
+
+
+
+
+
+ <h3>$now function</h3>
+Returns the current date and time
+
+<h4>Syntax</h4>
+<pre>$now</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$now → 2012-07-22T13:24:57</pre>
+
+
+
+
+ <h3>color_hsl() function</h3>
+Returns a string representation of a color based on its hue, saturation, and lightness attributes
+
+<p><h4>Syntax</h4>
+ color_hsl(<i>hue, saturation, lightness</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsl(100,50,70) → '166,217,140'</p>
+
+
+
+ <h3>scale_exp() function</h3>
+Transforms a given value from an input domain to an output range using an exponential curve. This function can be used to ease values in or out
+of the specified output range.
+
+<p><h4>Syntax</h4>
+ scale_exp(<i>val</i>,<i>domain_min</i>,<i>domain_max</i>,<i>range_min</i>,<i>range_max</i>,<i>exponent</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> val</i> → is a value in the input domain. The function will return a corresponding scaled value in the output range.<br>
+<i> domain_min, domain_max</i> → specify the input domain, the smallest and largest values the input <i>val</i> should take.<br>
+<i> range_min, range_max</i> → specify the output range, the smallest and largest values which should be output by the function.<br>
+<i> exponent</i> → a positive value (greater than 0), which dictates the way input values are mapped to the output range. Large exponents will cause the output values to 'ease in', starting slowly before
+accelerating as the input values approach the domain maximum. Smaller exponents (less than 1) will cause output values to 'ease out', where the mapping starts quickly but slows as it approaches the domain maximum.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<b>Easing in, using an exponent of 2:</b><br>
+ scale_exp(5,0,10,0,100,2) → 25<br>
+ scale_exp(7.5,0,10,0,100,2) → 56.25<br>
+ scale_exp(9.5,0,10,0,100,2) → 90.25<br>
+ <br>
+<b>Easing out, using an exponent of 0.5:</b><br>
+ scale_exp(3,0,10,0,100,0.5) → 54.772<br>
+ scale_exp(6,0,10,0,100,0.5) → 77.459<br>
+ scale_exp(9,0,10,0,100,0.5) → 94.868<br>
+
+
+
+
+
+ <h3>convexHull function</h3>
+Returns the convex hull of a geometry. It represents the minimum convex geometry that encloses all geometries within the set.
+
+<h4>Syntax</h4>
+<pre>convexHull( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( convexHull( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 4 10)' )) ) → returns POLYGON((3 3,4 10,4 4,3 3)) </pre>
+
+
+
+ <h3>union function</h3>
+Returns a geometry that represents the point set union of the geometries.
+
+<h4>Syntax</h4>
+<pre>union( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( union( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) ) → returns MULTIPOINT(4 4, 5 5)</pre>
+
+
+
+ <h3>xmax function</h3>
+Returns the maximum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>xmax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> xmax($geometry) → returns maximum x coordinate of $geometry</pre>
+
+
+
+
+ <h3>bounds function</h3>
+Returns a geometry which represents the bounding box of an input geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>bounds(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> bounds($geometry) → returns bounding box of $geometry</pre>
+
+
+
+
+ <h3>ymax function</h3>
+Returns the maximum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymax(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymax($geometry) → returns maximum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>contains function</h3>
+Returns true if and only if no points of b lie in the exterior of a, and at least one point of the interior of b lies in the interior of a.
+
+<h4>Syntax</h4>
+<pre>contains( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'POINT( 0.5 0.5 )' )) → returns 1</pre>
+<pre> contains( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>wordwrap() function</h3>
+Returns a string wrapped to a maximum/minimum number of characters.
+
+<p><h4>Syntax</h4>
+ wordwrap(<i>string,wrap_length[,delimiter_string]</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The string to be wrapped.<br>
+<i> wrap_length</i> → is number. If positive, the number represents the ideal maximum number of characters to wrap; if negative, the number represents the minimum number of characters to wrap.<br>
+<i> delimiter_string</i> → is string. The delimiter string to wrap to a new line (<u>optional</u>).<br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ wordwrap('UNIVERSITY OF QGIS',13) → 'UNIVERSITY OF\nQGIS'<br>
+ wordwrap('UNIVERSITY OF QGIS',-3) → 'UNIVERSITY\nOF QGIS'</p>
+
+
+
+
+<h3>color_rgb() function</h3>
+Returns a string representation of a color based on its red, green, and blue components
+
+<p><h4>Syntax</h4>
+ color_rgb(<i>red, green, blue</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> red</i> → the red component as an integer value from 0 to 255.<br>
+<i> green</i> → the green component as an integer value from 0 to 255.<br>
+<i> blue</i> → the blue component as an integer value from 0 to 255.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_rgb(255,127,0) → '255,127,0'</p>
+
+
+
+
+<h3>color_cmyk() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow and black components
+
+<p><h4>Syntax</h4>
+ color_cmyk(<i>cyan, magenta, yellow, black</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyk(100,50,0,10) → '0,115,230'</p>
+
+
+
+ <h3>intersection function</h3>
+Returns a geometry that represents the shared portion of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>intersection( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( intersection( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 )' )) ) → returns LINESTRING(3 3, 4 4)</pre>
+
+
+
+
+<h3>ramp_color() function</h3>
+Returns a string representing a color from a color ramp.
+
+<p><h4>Syntax</h4>
+ ramp_color(<i>ramp_name,value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> ramp_name</i> → the name of the color ramp as a string, for example 'Spectral'.<br>
+<i> value</i> → the position on the ramp to select the color from as a real number between 0 and 1.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ ramp_color('Spectral',0.3) → '253,190,115,255'</p>
+
+<p><h4>Note:</h4>
+The color ramps available vary between QGIS installations. This function
+may not give the expected results if you move your Quantum project.
+</p>
+
+
+
+ <h3>IS expression</h3>
+Returns 1 if a is the same as b.
+
+<h4>Syntax</h4>
+<pre>a IS b</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' IS 'A' → returns 1 </pre>
+<pre> 'A' IS 'a' → returns 0 </pre>
+<pre> 4 IS 4 → returns 1 </pre>
+<pre> 4 IS 2+2 → returns 1 </pre>
+<pre> 4 IS 2 → returns 0 </pre>
+<pre> $geometry IS NULL → returns 0, if your geometry is not NULL</pre>
+
+
+
+
+ <h3>color_hsv() function</h3>
+Returns a string representation of a color based on its hue, saturation, and value attributes
+
+<p><h4>Syntax</h4>
+ color_hsv(<i>hue, saturation, value</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> value</i> → the value percentage of the color as an integer from 0 to 100.<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsv(40,100,100) → '255,170,0'</p>
+
+
+
+ <h3>ILIKE expression</h3>
+Returns 1 if the first parameter matches case-insensitive the supplied pattern. LIKE can be used instead of ILIKE to make the match case-sensitive. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number ILIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' ILIKE 'A' → returns 1 </pre>
+<pre> 'A' ILIKE 'a' → returns 1 </pre>
+<pre> 'A' ILIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>LIKE expression</h3>
+Returns 1 if the first parameter matches the supplied pattern. Works with numbers also.
+
+<h4>Syntax</h4>
+<pre>string/number LIKE pattern</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'A' LIKE 'A' → returns 1 </pre>
+<pre> 'A' LIKE 'a' → returns 0 </pre>
+<pre> 'A' LIKE 'B' → returns 0 </pre>
+
+
+
+ <h3>ymin function</h3>
+Returns the minimum y coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>ymin(geom)</pre>
+
+<h4>Arguments</h4>
+geom → a geometry
+
+<h4>Example</h4>
+<pre> ymin($geometry) → returns minimum y coordinate of $geometry</pre>
+
+
+
+
+ <h3>geomFromGML function</h3>
+Returns a geometry from a GML representation of geometry
+
+<h4>Syntax</h4>
+<pre>geomFromGML(text)</pre>
+
+<h4>Arguments</h4>
+text → GML representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromGML( '<gml:LineString srsName="EPSG:4326"><gml:coordinates>4,4 5,5 6,6</gml:coordinates></gml:LineString>') → returns a geometry</pre>
+
+
+
+
+ <h3>Date and Time Group</h3>
+This group contains functions for handling date and time data.
+
+
+
+ <h3>combine function</h3>
+Returns the combination of geometry a and geometry b.
+
+<h4>Syntax</h4>
+<pre>combine( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5 )' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4, 2 1 )' )) ) → returns MULTILINESTRING((4 4, 2 1), (3 3, 4 4), (4 4, 5 5)) </pre>
+<pre> geomToWKT( combine( geomFromWKT( 'LINESTRING(3 3 , 4 4 )' ) , geomFromWKT( 'LINESTRING(3 3 , 6 6, 2 1 )' )) ) → returns LINESTRING(3 3, 4 4, 6 6, 2 1) </pre>
+
+
+
+ <h3>intersects function</h3>
+Returns 1 if the geometries spatially intersect (share any portion of space) and 0 if they don't.
+
+<h4>Syntax</h4>
+<pre>intersects( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> intersects( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> intersects( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>clamp() function</h3>
+Restricts an input value to a specified range.
+
+<p><h4>Syntax</h4>
+ clamp(<i>minimum</i>,<i>input</i>,<i>maximum</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> minimum</i> → The smallest value <i>input</i> is allowed to take.<br>
+<i> input</i> → a value which will be restricted to the range specified by <i>minimum</i> and <i>maximum</i>.<br>
+<i> maximum</i> → The largest value <i>input</i> is allowed to take.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ clamp(1,5,10) → 5 (<i>input</i> is between 1 and 10 so is returned unchanged)<br>
+ clamp(1,0,10) → 1 (<i>input</i> is less than minimum value of 1, so function returns 1)<br>
+ clamp(1,11,10) → 10 (<i>input</i> is greater than maximum value of 10, so function returns 10)<br>
+
+
+
+
+
+ <h3>disjoint function</h3>
+Returns 1 if the geometries do not "spatially intersect" - if they do not share any space together.
+
+<h4>Syntax</h4>
+<pre>disjoint( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> disjoint( geomFromWKT( 'POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> disjoint( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'POINT(4 4)' )) → returns 0</pre>
+
+
+
+ <h3>geomFromWKT function</h3>
+Returns a geometry created from a Well-Known Text (WKT) representation.
+
+<h4>Syntax</h4>
+<pre>geomFromWKT(text)</pre>
+
+<h4>Arguments</h4>
+text → Well-Known Text (WKT) representation of a geometry
+
+<h4>Example</h4>
+<pre> geomFromWKT( 'POINT(4 5)' ) → returns a geometry</pre>
+
+
+
+
+ <h3>buffer function</h3>
+Returns a geometry that represents all points whose distance from this geometry is less than or equal to distance. Calculations are in the Spatial Reference System of this Geometry.
+
+<h4>Syntax</h4>
+<pre>buffer(a, b)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → distance for the buffer
+
+<h4>Example</h4>
+<pre> buffer($geometry, 10.5 ) → returns a polygon</pre>
+
+
+
+
+ <h3>$id function</h3>
+Returns the feature id of the current row.
+
+<h4>Syntax</h4>
+<pre>$id</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$id → 42</pre>
+
+
+
+
+ <h3>$uuid function</h3>
+Generates a Universally Unique Identifier (UUID) for each row using the Qt
+<a href='http://qt-project.org/doc/qt-4.8/quuid.html#createUuid'>QUuid::createUuid</a>
+method. Each UUID is 38 characters long.
+
+<h4>Syntax</h4>
+<pre>$uuid</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$uuid → {0bd2f60f-f157-4a6d-96af-d4ba4cb366a1}</pre>
+
+
+
+ <h3>crosses function</h3>
+Returns 1 if the supplied geometries have some, but not all, interior points in common.
+
+<h4>Syntax</h4>
+<pre>crosses( $geometry , $geometry)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> crosses( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> crosses( geomFromWKT( 'POINT(4 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>geomToWKT function</h3>
+Returns the Well-Known Text (WKT) representation of the geometry without SRID metadata.
+
+<h4>Syntax</h4>
+<pre>geomToWKT(a)</pre>
+
+<h4>Arguments</h4>
+a → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+ <h3>touches function</h3>
+Returns 1 if the geometries have at least one point in common, but their interiors do not intersect.
+
+<h4>Syntax</h4>
+<pre>touches( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> touches( geomFromWKT( 'LINESTRING(5 3 , 4 4)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> touches( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(5 5)' )) → returns 0</pre>
+
+
+
+ <h3>overlaps function</h3>
+Returns 1 if the geometries share space, are of the same dimension, but are not completely contained by each other.
+
+<h4>Syntax</h4>
+<pre>overlaps( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> overlaps( geomFromWKT( 'LINESTRING(3 5 , 4 4 , 5 5 , 5 3)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 1</pre>
+<pre> overlaps( geomFromWKT( 'LINESTRING(0 0 , 1 1)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' )) → returns 0</pre>
+
+
+
+ <h3>AND logical operator</h3>
+Returns 1 when condition a and b are true.
+
+<h4>Syntax</h4>
+<pre> condition a AND condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 AND 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 AND 1 = 2 → returns 0 </pre>
+
+
+
+
+ <h3>$geometry function</h3>
+Returns the geometry of the current feature. Can be used for processing with other functions.
+
+<h4>Syntax</h4>
+<pre>$geometry</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> geomToWKT( $geometry ) → POINT(6 50)</pre>
+
+
+
+
+ <h3>OR logical operator</h3>
+Returns 1 when condition a or b is true.
+
+<h4>Syntax</h4>
+<pre> condition a OR condition b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 4 = 2+2 OR 1 = 1 → returns 1 </pre>
+<pre> 4 = 2+2 OR 1 = 2 → returns 1 </pre>
+<pre> 4 = 2 OR 1 = 2 → returns 0 </pre>
+
+
+
+ <h3>centroid function</h3>
+Returns the geometric center of a geometry.
+
+<h4>Syntax</h4>
+<pre>centroid(a)</pre>
+
+<h4>Arguments</h4>
+b → geometry
+
+<h4>Example</h4>
+<pre> centroid($geometry) → returns a point geometry</pre>
+
+
+
+
+ <h3>within function</h3>
+Returns 1 if the geometry a is completely inside geometry b
+
+<h4>Syntax</h4>
+<pre>within( geometry a , geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> within( geomFromWKT( 'POINT( 0.5 0.5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 1</pre>
+<pre> within( geomFromWKT( 'POINT( 5 5 )') , geomFromWKT('POLYGON((0 0 , 0 1 , 1 1 , 1 0 , 0 0 ))' ) ) → returns 0</pre>
+
+
+
+ <h3>$map function</h3>
+Returns the id of the current map item if the map is being drawn in a composition, or "canvas" if the map is being
+drawn within the main QGIS window.
+
+<h4>Syntax</h4>
+<pre>$map</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>$map → "overview_map" (within a composer item)<br />
+$map → "canvas" (within the main QGIS main canvas)</pre>
+
+
+
+
+
+ <h3>distance function</h3>
+ Returns the minimum distance (based on spatial ref) between two geometries in projected units.
+
+<h4>Syntax</h4>
+<pre>distance( a, b )</pre>
+
+<h4>Arguments</h4>
+a → geometry
+b → geometry
+
+<h4>Example</h4>
+<pre> distance( geomFromWKT( 'POINT(4 4)' ) , geomFromWKT( 'POINT(4 8)' )) → returns 4</pre>
+
+
+
+ <h3>difference function</h3>
+Returns a geometry that represents that part of geometry a that does not intersect with geometry b.
+
+<h4>Syntax</h4>
+<pre>difference( a, b )</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( difference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 4 4)' )) ) → returns LINESTRING(4 4, 5 5)</pre>
+
+
+
+ <h3>NOT</h3>
+Returns 1 if a is not the same as b.
+
+<h4>Syntax</h4>
+<pre> a NOT b </pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre> 'a' IS NOT 'b' → returns 1 </pre>
+<pre> 'a' IS NOT 'a' → returns 0 </pre>
+<pre> 4 IS NOT 2+2 → returns 0 </pre>
+
+
+
+
+ <h3>symDifference function</h3>
+Returns a geometry that represents the portions of a and b that do not intersect.
+
+<h4>Syntax</h4>
+<pre>symDifference( geometry a, geometry b)</pre>
+
+<h4>Arguments</h4>
+geometry → geometry
+geometry → geometry
+
+<h4>Example</h4>
+<pre> geomToWKT( symDifference( geomFromWKT( 'LINESTRING(3 3 , 4 4 , 5 5)' ) , geomFromWKT( 'LINESTRING(3 3 , 8 8)' )) ) → returns LINESTRING(5 5, 8 8)</pre>
+
+
+
+ <h3>$perimeter function</h3>
+Returns the perimeter length of the current feature.
+
+<h4>Syntax</h4>
+<pre>$perimeter</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$perimeter → 42</pre>
+
+
+
+
+ <h3>tointerval() function</h3>
+Converts a string to a interval type. Can be used to take days, hours, month, etc off a date.
+
+<h4>Syntax</h4>
+<code>tointerval('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string. Format {n} days {n} hours {n} months
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>todatetime('2012-05-05 12:00:00') - tointerval('1 day 2 hours') → 2012-05-04T10:00:00</code><br>
+
+
+ <h3>hour() function</h3>
+Extract the hour from a datetime or time, or the number of hours
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>hour(datetime)</code><br>
+<code>hour(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is datetime or time. The date to extract the hour from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of hours from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>hour('2012-07-22T13:24:57') → 13</code><br>
+<code>hour(tointerval('3 hours')) → 3</code><br>
+<code>hour(age('2012-07-22T13:00:00','2012-07-22T10:00:00')) → 3</code><br>
+<code>hour(age('2012-01-01','2010-01-01')) → 17520</code><br>
+
+
+
+
+ <h3>color_hsla() function</h3>
+Returns a string representation of a color based on its hue, saturation, lightness and alpha (transparency) attributes
+
+<p><h4>Syntax</h4>
+ color_hsla(<i>hue, saturation, lightness, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> hue</i> → the hue of the color, as an integer value from 0 to 360.<br>
+<i> saturation</i> → the saturation percentage of the color as an integer value from 0 to 100.<br>
+<i> lightness</i> → the lightness percentage of the color as an integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_hsla(100,50,70,200) → '166,217,140,200'</p>
+
+
+
+ <h3>$pi constant</h3>
+Returns pi as value for calculations
+
+<h4>Syntax</h4>
+<pre>$pi</pre>
+
+<h4>Arguments</h4>
+None
+
+<h4>Example</h4>
+<pre>$pi → 3.14159265358979</pre>
+
+
+
+ <h3>Record Group</h3>
+This group contains functions that operate on record identifiers.
+
+
+
+ <h3>totime() function</h3>
+Convert a string into Qt time type.
+
+<h4>Syntax</h4>
+<code>totime('string')</code><br>
+
+<h4>Arguments</h4>
+<code>string</code> - is string in Qt time format.
+<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>totime('12:30:01') → 12:30:01</code><br>
+
+
+ <h3>replace() function</h3>
+Returns a string with the the supplied string replaced.
+
+<p><h4>Syntax</h4>
+ replace(<i>string,before,after</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> string</i> → is string. The start string.<br>
+<i> before</i> → is string. The string to replace.<br>
+<i> after</i> → is string. The string that will replace <i>before</i><br></p>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ replace('QGIS SHOULD ROCK','SHOULD','DOES') → 'QGIS DOES ROCK'</p>
+
+
+
+ <h3>Conditionals Group</h3>
+This group contains functions to handle conditional checks in expressions.
+
+
+
+ <h3>abs() function</h3>
+Returns the absolute value of a number.<br>
+
+
+<h4>Syntax</h4>
+abs(<i>value</i>)<br>
+
+<h4>Arguments</h4>
+<code>value</code> - a number.<br>
+
+<h4>Example</h4>
+<code>abs(-2) → 2</code><br>
+
+
+
+ <h3>max() function</h3>
+Returns the largest value in a set of values.
+
+<h4>Syntax</h4>
+ max(<i>value<i>[,<i>value</i>...])
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> value</i> → a number.<br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+ max(2,10.2,5.5) → 10.2
+
+
+
+ <h3>sqrt() function</h3>
+Returns square root of a value
+
+
+<p><h4>Syntax</h4>
+ sqrt(<i>real</i>)</p>
+
+<p><h4>Arguments</h4>
+<i>real</i> → number.</p>
+
+<p><h4>Example</h4>
+ sqrt(9) → 3</p>
+
+
+
+ <h3>Conditions Group</h3>
+This group contains functions that operate on condition.
+
+
+
+
+<h3>color_cmyka() function</h3>
+Returns a string representation of a color based on its cyan, magenta, yellow, black and alpha (transparency) components
+
+<p><h4>Syntax</h4>
+ color_cmyka(<i>cyan, magenta, yellow, black, alpha</i>)</p>
+
+<p><h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> cyan</i> → the cyan component of the color, as a percentage integer value from 0 to 100.<br>
+<i> magenta</i> → the magenta component of the color, as a percentage integer value from 0 to 100.<br>
+<i> yellow</i> → the yellow component of the color, as a percentage integer value from 0 to 100.<br>
+<i> black</i> → the black component of the color, as a percentage integer value from 0 to 100.<br>
+<i> alpha</i> → the alpha component as an integer value from 0 (completely transparent) to 255 (opaque).<br>
+
+<p><h4>Example</h4>
+<!-- Show example of function.-->
+ color_cmyka(100,50,0,10,200) → '0,115,230,200'</p>
+
+
+
+ <h3>format_number() function</h3>
+Returns a number formatted with the locale separator for thousands.
+Also truncates the number to the number of supplied places.
+<h4>Syntax</h4>
+<code>format_number(number,places)</code><br>
+
+<h4>Arguments</h4>
+<code>number</code> - is number. The number to be formatted.
+<br>
+<code>places</code> - is int. The number of decimal places to truncate the string
+to.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>format_number(10000000.332,2) → 10,000,000.33</code>
+
+
+
+
+ <h3>year() function</h3>
+Extract the year part from a date, or the number of years
+from a <code>Interval</code>
+
+<h4>Syntax</h4>
+<code>year(date)</code><br>
+<code>year(Interval)</code><br>
+
+<h4>Arguments</h4>
+<code>date</code> - is date or datetime. The date to extract the year from.
+<br>
+<code>Interval</code> - is Interval. The Interval to return the number of years from.
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<code>year('2012-05-12') → 2012</code><br>
+<code>year(tointerval('3 Years')) → 3</code><br>
+<code>year(age('2012-01-01','2010-01-01')) → 1.9986..</code><br>
+
+
+
+
+ <h3>CASE expression</h3>
+A conditional expression that can be used to evaluate multiple expressions and
+return a result.
+
+<h4>Syntax</h4>
+<pre>
+ CASE
+ WHEN <i>condition</i> THEN <i>result</i>
+ [ ...n ]
+ [ ELSE <i>result</i> ]
+ END
+</pre>
+[ ] marks optional components
+
+<h4>Arguments</h4>
+<!-- List args for functions here-->
+<i> WHEN condition</i> - The condition expression to evaluate. <br>
+<i> THEN result</i> - If <i>condition</i> evaluates to True then <i>result</i> is evaluated and returned. <br>
+<i> ELSE result</i> - If none of the above conditions evaluated to True then <i>result</i> is evaluated and returned. <br>
+
+<h4>Example</h4>
+<!-- Show example of function.-->
+<pre>
+ CASE
+ WHEN <i>"column" IS NULL</i> THEN <i>'None'</i>
+ END
+</pre>
+
+
+
+ <h3>randf() function</h3>
Returns a random float within the range specified by the minimum and
maximum argument (inclusive).
@@ -59309,10 +59437,10 @@ This function takes two arguments.
<!-- Show example of function.-->
<code>randf(1, 10) → 4.59258286403147</code><br>
-
- <h3>xmin function</h3>
Returns the minimum x coordinate of a geometry. Calculations are in the Spatial Reference System of this Geometry.
@@ -59326,10 +59454,10 @@ geom → a geometry
<pre> xmin($geometry) → returns minimum x coordinate of $geometry</pre>
-
- <h3>scale_linear() function</h3>
Transforms a given value from an input domain to an output range using linear interpolation.
@@ -59350,10 +59478,10 @@ Transforms a given value from an input domain to an output range using linear in
-
- <h3>trim() function</h3>
Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
@@ -59366,12 +59494,12 @@ Removes all leading and trailing whitespace (spaces, tabs, etc) from a string.
<p><h4>Example</h4>
<!-- Show example of function.-->
- trim(' hello world ') → 'hello world'</p>
+ trim(' hello world ') → 'hello world'</p>
-
- <h3>minute() function</h3>
Extract the minute from a datetime or time, or the number of minutes
from a <code>Interval</code>
@@ -59387,16 +59515,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>minute('2012-07-22T13:24:57') → 24</code><br>
-<code>minute(tointerval('3 minutes')) → 3</code><br>
-<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
-<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
+<code>minute('2012-07-22T13:24:57') → 24</code><br>
+<code>minute(tointerval('3 minutes')) → 3</code><br>
+<code>minute(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 20</code><br>
+<code>minute(age('2012-01-01','2010-01-01')) → 1051200</code><br>
-
- <h3>age() function</h3>
Returns the difference between two dates.
<br><br>
@@ -59425,15 +59553,15 @@ in order to extract useful information:
<h4>Example</h4>
<!-- Show example of function.-->
-<code>age('2012-05-12','2012-05-2') → Interval</code><br>
+<code>age('2012-05-12','2012-05-2') → Interval</code><br>
use <code>day</code> to extract number of days<br>
-<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
+<code>day(age('2012-05-12','2012-05-2')) → 10</code><br>
-
- <h3>log10() function</h3>
Returns the value of the base 10 logarithm of the passed expression.
<br>
@@ -59450,17 +59578,17 @@ This function takes one argument.
<code>log10(1) → 0</code><br>
<code>log10(100) → 2</code><br>
-
- <h3>Conversions Group</h3>
This group contains functions to convert on data type to another e.g string to integer, integer to string.
-
- <h3>cos() function</h3>
Returns cosinus of an angle.
@@ -59474,17 +59602,17 @@ Returns cosinus of an angle.
<p><h4>Example</h4>
cos(1.571) → 0.000796326710733263</p>
-
- <h3>Operators Group</h3>
This group contains operators e.g + - *
-
- <h3>second() function</h3>
Extract the seconds from a datetime or time, or the number of seconds
from a <code>Interval</code>
@@ -59500,16 +59628,16 @@ from a <code>Interval</code>
<h4>Example</h4>
<!-- Show example of function.-->
-<code>second('2012-07-22T13:24:57') → 57</code><br>
-<code>second(tointerval('3 seconds')) → 3</code><br>
-<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
-<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
+<code>second('2012-07-22T13:24:57') → 57</code><br>
+<code>second(tointerval('3 seconds')) → 3</code><br>
+<code>second(age('2012-07-22T00:20:00','2012-07-22T00:00:00')) → 1200</code><br>
+<code>second(age('2012-01-01','2010-01-01')) → 63072000</code><br>
-
- <h3>atan() function</h3>
Returns arcustanget of a value in radians.
@@ -59523,10 +59651,10 @@ Returns arcustanget of a value in radians.
<p><h4>Example</h4>
atan(0.5) → 0.463647609000806</p>
-
- <h3>$length function</h3>
Returns the length of the current feature.
@@ -59539,10 +59667,10 @@ None
<h4>Example</h4>
<pre>$length → 42.4711</pre>
-
- <h3>title() function</h3>
Converts all words of a string to title case (all words lower case with leading
capital letter).
@@ -59556,12 +59684,12 @@ capital letter).
<p><h4>Example</h4>
<!-- Show example of function.-->
- upper('hello WOrld') → 'Hello World'</p>
+ upper('hello WOrld') → 'Hello World'</p>
-
- <h3>regexp_match() function</h3>
Returns true if any part of a string matches the supplied regular expression.
@@ -59575,12 +59703,12 @@ Returns true if any part of a string matches the supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
+ regexp_match('QGIS ROCKS','\\sROCKS') → 1</p>
-
- <h3>substr() function</h3>
Return a part of a string
@@ -59595,17 +59723,17 @@ Return a part of a string
<p><h4>Example</h4>
<!-- Show example of function.-->
- substr('HELLO WORLD',3,5) → 'LLO W'</p>
+ substr('HELLO WORLD',3,5) → 'LLO W'</p>
-
- <h3>format() function</h3>
Format a string using supplied arguments.
<h4>Syntax</h4>
-<code>format('string', arg, [arg...n])</code><br>
+<code>format('string', arg, [arg...n])</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. String with Qt QString place holders. Use %1, %2, etc for placeholders. Placeholders can be repeated.
@@ -59615,10 +59743,10 @@ Format a string using supplied arguments.
<h4>Example</h4>
<!-- Show example of function.-->
<code>format('This %1 a %2','is', 'test') → This is a test</code><br>
-
- <h3>regexp_replace() function</h3>
Returns a string with the supplied regular expression replaced.
@@ -59633,12 +59761,12 @@ Returns a string with the supplied regular expression replaced.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
+ regexp_replace('QGIS SHOULD ROCK','\\sSHOULD\\s',' DOES ') → 'QGIS DOES ROCK'</p>
-
- <h3>regexp_substr() function</h3>
Returns the portion of a string which matches a supplied regular expression.
@@ -59652,12 +59780,12 @@ Returns the portion of a string which matches a supplied regular expression.
<p><h4>Example</h4>
<!-- Show example of function.-->
- regexp_substr('abc123','(\\d+)') → '123'</p>
+ regexp_substr('abc123','(\\d+)') → '123'</p>
-
- <h3>$y function</h3>
Returns the y coordinate of the current feature.
@@ -59671,10 +59799,10 @@ None
<pre>$y → 42</pre>
-
-
<h3>color_rgba() function</h3>
Returns a string representation of a color based on its red, green, blue, and alpha (transparency) components
@@ -59691,12 +59819,12 @@ Returns a string representation of a color based on its red, green, blue, and al
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_rgba(255,127,0,200) → '255,127,0,200'</p>
+ color_rgba(255,127,0,200) → '255,127,0,200'</p>
-
- <h3>$x function</h3>
Returns the x coordinate of the current feature.
@@ -59710,17 +59838,17 @@ None
<pre>$x → 42</pre>
-
- <h3>Math Group</h3>
This group contains math functions e.g square root, sin and cos
-
- <h3>min() function</h3>
Returns the smallest value in a set of values.
@@ -59735,10 +59863,10 @@ Returns the smallest value in a set of values.
<!-- Show example of function.-->
min(20.5,10,6.2) → 6.2
-
- <h3>lower() function</h3>
Converts a string to lower case letters.
@@ -59749,12 +59877,12 @@ Converts a string to lower case letters.
<i> string</i> → is string. The String to convert to lower case.</p>
<p><h4> Example</h4>
- lower('HELLO World') → 'hello world'</p>
+ lower('HELLO World') → 'hello world'</p>
-
- <h3>$numfeatures function</h3>
In atlas generation, returns the total number of features within the coverage layer.
@@ -59768,17 +59896,17 @@ None
<pre>$numfeatures → 42</pre>
-
- <h3>String Group</h3>
This group contains functions that operate on strings e.g replace, convert to upper case.
-
- <h3>concat() function</h3>
Concatenates several strings to one.
@@ -59791,12 +59919,12 @@ Concatenates several strings to one.
<h4>Example</h4>
<!-- Show example of function.-->
- concat('a','b','c','d','e') → 'abcde'
+ concat('a','b','c','d','e') → 'abcde'
-
- <h3>coalesce() function</h3>
Returns the first non-NULL value from the expression list.
<br>
@@ -59813,14 +59941,14 @@ This function can take any number of arguments.
<code>coalesce(NULL, 2) → 2</code><br>
<code>coalesce(NULL, 2, 3) → 2</code><br>
<code>coalesce(7, NULL, 3*2) → 7</code><br><br>
-<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
- else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
+<code>coalesce("fieldA", "fallbackField", 'ERROR') → value of fieldA if it is non-NULL
+ else the value of "fallbackField" or the string 'ERROR' if both are NULL</code><br>
-
- <h3>asin() function</h3>
Returns arcussinus of a value in radians.
@@ -59834,15 +59962,15 @@ Returns arcussinus of a value in radians.
<p><h4>Example</h4>
asin(1.0) → 1.5707963267949</p>
-
- <h3>todatetime() function</h3>
Convert a string into Qt data time type.
<h4>Syntax</h4>
-<code>todatetime('string')</code><br>
+<code>todatetime('string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string in Qt date time format.
@@ -59851,15 +59979,15 @@ Convert a string into Qt data time type.
<h4>Example</h4>
<!-- Show example of function.-->
<code>todatetime('2012-05-04 12:50:00') → 2012-05-04T12:50:00</code><br>
-
- <h3>format_date() function</h3>
-Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
+Format a date type or string into a custom string format. Uses Qt data time format strings. See <a href='http://qt-project.org/doc/qt-4.8/qdatetime.html#toString'>QDateTime::toString</a>
<h4>Syntax</h4>
-<code>format_date('string', 'format_string')</code><br>
+<code>format_date('string', 'format_string')</code><br>
<h4>Arguments</h4>
<code>string</code> - is string. Date/Time/DateTime string.
@@ -59890,14 +60018,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>ddd</td>
- <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
+ <td>the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses <a href=
"qdate.html#shortDayName">QDate::shortDayName</a>().</td>
</tr>
<tr valign="top">
<td>dddd</td>
- <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
+ <td>the long localized day name (e.g. 'Monday' to 'Sunday'). Uses <a href=
"qdate.html#longDayName">QDate::longDayName</a>().</td>
</tr>
@@ -59916,14 +60044,14 @@ Format a date type or string into a custom string format. Uses Qt data time form
<tr valign="top">
<td>MMM</td>
- <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
+ <td>the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses <a href=
"qdate.html#shortMonthName">QDate::shortMonthName</a>().</td>
</tr>
<tr valign="top">
<td>MMMM</td>
- <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
+ <td>the long localized month name (e.g. 'January' to 'December'). Uses <a href=
"qdate.html#longMonthName">QDate::longMonthName</a>().</td>
</tr>
@@ -60028,12 +60156,12 @@ Format a date type or string into a custom string format. Uses Qt data time form
<h4>Example</h4>
<!-- Show example of function.-->
-<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
+<code>format_date('2012-05-15','dd.mm.yyyy') → 15.05.2012</code><br>
-
- <h3>tan() function</h3>
Returns tangent of an angle.
@@ -60047,10 +60175,10 @@ Returns tangent of an angle.
<p><h4>Example</h4>
tan(1.0) → 1.5574077246549</p>
-
- <h3>$feature function</h3>
In atlas generation, returns the current feature number that is iterated over on the coverage layer.
@@ -60064,10 +60192,10 @@ None
<pre>$feature → 2</pre>
-
- <h3>ln() function</h3>
Returns the value of the natural logarithm of the passed expression.
<br>
@@ -60084,10 +60212,10 @@ This function takes one argument.
<code>ln(1) → 0</code><br>
<code>ln(2.7182818284590452354) → 1</code><br>
-
- <h3>color_hsva() function</h3>
Returns a string representation of a color based on its hue, saturation, value and alpha (transparency) attributes
@@ -60103,9 +60231,9 @@ Returns a string representation of a color based on its hue, saturation, value a
<p><h4>Example</h4>
<!-- Show example of function.-->
- color_hsva(40,100,100,200) → '255,170,0,200'</p>
+ color_hsva(40,100,100,200) → '255,170,0,200'</p>
-
@@ -60140,2235 +60268,2235 @@ Returns a string representation of a color based on its hue, saturation, value a
(1-256)
-
(Optional) column to read labels
-
3D-Viewer (NVIZ)
-
3d Visualization
-
Add a value to the current category values
-
Add elements to layer (ALL elements of the selected layer type!)
-
Add missing centroids to closed boundaries
-
Add one or more columns to attribute table
-
Allocate network
-
Assign constant value to column
-
Assign new constant value to column only if the result of query is TRUE
-
Assign new value as result of operation on columns to column in attribute table
-
Assign new value to column as result of operation on columns only if the result of query is TRUE
-
Attribute field
- 屬性欄位
+
Attribute field (interpolated values)
-
Attribute field to (over)write
-
Attribute field to join
-
Auto-balancing of colors for LANDSAT-TM raster
-
Bicubic or bilinear spline interpolation with Tykhonov regularization
-
Bilinear interpolation utility for raster maps
-
Blend color components for two rasters by given ratio
-
Blend red, green, raster layers to obtain one color raster
-
Break (topologically clean) polygons (imported from non topological format, like ShapeFile). Boundaries are broken on each point shared between 2 and more polygons where angles of segments are different
-
Break lines at each intersection of vector
-
Brovey transform to merge multispectral and high-res panchromatic channels
-
Buffer
- 輪廓
+
Build polylines from lines
-
Calculate average of raster within areas with the same category in a user-defined base map
-
Calculate covariance/correlation matrix for user-defined rasters
-
Calculate error matrix and kappa parameter for accuracy assessment of classification result
-
Calculate geometry statistics for vectors
-
Calculate linear regression from two rasters: y = a + b*x
-
Calculate median of raster within areas with the same category in a user-defined base map
-
Calculate mode of raster within areas with the same category in a user-defined base map
-
Calculate optimal index factor table for LANDSAT-TM raster
-
Calculate raster surface area
-
Calculate shadow maps from exact sun position
-
Calculate shadow maps from sun position determinated by date/time
-
Calculate statistics for raster
-
Calculate univariate statistics for numeric attributes in a data table
-
Calculate univariate statistics from raster based on vector objects
-
Calculate univariate statistics from the non-null cells of raster
-
Calculate univariate statistics of vector map features
-
Calculate volume of data clumps, and create vector with centroids of clumps
-
Category or object oriented statistics
-
Cats
-
Cats (select from the map or using their id)
-
Change category values and labels
-
Change field
-
Change layer number
-
Change resolution
-
Change the type of boundary dangle to line
-
Change the type of bridges connecting area and island or 2 islands from boundary to line
-
Change the type of geometry elements
-
Choose appropriate format
-
Columns management
-
Compares bit patterns with raster
-
Compress and decompress raster
-
Compress raster
-
Computes a coordinate transformation based on the control points
-
Concentric circles
-
Connect nodes by shortest route (traveling salesman)
-
Connect selected nodes by shortest tree (Steiner tree)
-
Connect vector to database
-
Convert 2D vector to 3D by sampling raster
-
Convert 2D vector to 3D vector by sampling of elevation raster. Default sampling by nearest neighbour
-
Convert GRASS binary vector to GRASS ASCII vector
-
Convert a raster to vector within GRASS
-
Convert a vector to raster within GRASS
-
Convert bearing and distance measurements to coordinates and vice versa
-
Convert boundaries to lines
-
Convert centroids to points
-
Convert coordinates
-
Convert coordinates from one projection to another (cs2cs frontend)
-
Convert lines to boundaries
-
Convert points to centroids
-
Convert raster to vector areas
-
Convert raster to vector lines
-
Convert raster to vector points
-
Convert vector to raster using attribute values
-
Convert vector to raster using constant
-
Convex hull
-
Copy a table
-
Copy also attribute table (only the table of layer 1 is currently supported)
-
Count of neighbouring points
-
Create 3D volume map based on 2D elevation and value rasters
-
Create a MASK for limiting raster operation
-
Create a map containing concentric rings
-
Create a raster plane
-
Create and add new table to vector
-
Create and/or modify raster support files
-
Create aspect raster from DEM (digital elevation model)
-
Create cross product of category values from multiple rasters
-
Create fractal surface of given fractal dimension
-
Create grid in current region
-
Create new GRASS location and transfer data into it
-
Create new GRASS location from metadata file
-
Create new GRASS location from raster data
-
Create new GRASS location from vector data
-
Create new layer with category values based upon user's reclassification of categories in existing raster
-
Create new location from .prj (WKT) file
-
Create new raster by combining other rasters
-
Create new vector by combining other vectors
-
Create new vector with current region extent
-
Create nodes on network
-
Create parallel line to input lines
-
Create points
-
Create points along input lines
-
Create points/segments from input vector lines and positions
-
Create quantization file for floating-point raster
-
Create random 2D/3D vector points
-
Create random cell values with spatial dependence
-
Create random points
-
Create random raster
-
Create random vector point contained in raster
-
Create raster images with textural features from raster (first serie of indices)
-
Create raster of distance to features in input layer
-
Create raster of gaussian deviates with user-defined mean and standard deviation
-
Create raster of uniform random deviates with user-defined range
-
Create raster with contiguous areas grown by one cell
-
Create raster with textural features from raster (second serie of indices)
-
Create red, green and blue rasters combining hue, intensity, and saturation (his) values from rasters
-
Create shaded map
-
Create slope raster from DEM (digital elevation model)
-
Create standard vectors
-
Create surface from rasterized contours
-
Create vector contour from raster at specified levels
-
Create vector contour from raster at specified steps
-
Create watershed basin
-
Create watershed subbasins raster
-
Cut network by cost isolines
-
DXF vector layer
-
Database
- 資料庫
+
Database connection
-
Database file
-
Database management
-
Delaunay triangulation (areas)
-
Delaunay triangulation (lines)
-
Delaunay triangulation, Voronoi diagram and convex hull
-
Delete category values
-
Develop images and group
-
Develop map
-
Directory of rasters to be linked
-
Disconnect vector from database
-
Display general DB connection
-
Display list of category values found in raster
-
Display projection information from PROJ.4 projection description file
-
Display projection information from PROJ.4 projection description file and create a new location based on it
-
Display projection information from a georeferenced file (raster, vector or image) and create a new location based on it
-
Display projection information from georeferenced ASCII file containing WKT projection description
-
Display projection information from georeferenced ASCII file containing WKT projection description and create a new location based on it
-
Display projection information from georeferenced file (raster, vector or image)
-
Display projection information of the current location
-
Display raster category values and labels
-
Display results of SQL selection from database
-
Display the HTML manual pages of GRASS
-
Display vector attributes
-
Display vector map attributes with SQL
-
Dissolves boundaries between adjacent areas sharing a common category number or attribute
-
Download and import data from WMS server
-
Drop column from attribute table
-
E00 vector layer
-
Elevation raster for height extraction (optional)
-
Execute any SQL statement
-
Export 3 GRASS rasters (R,G,B) to PPM image at the resolution of the current region
-
Export from GRASS
-
Export raster as non-georeferenced PNG image format
-
Export raster from GRASS
-
Export raster series to MPEG movie
-
Export raster to 8/24bit TIFF image at the resolution of the current region
-
Export raster to ASCII text file
-
Export raster to ESRI ARCGRID
-
Export raster to GRIDATB.FOR map file (TOPMODEL)
-
Export raster to Geo TIFF
-
Export raster to POVRAY height-field file
-
Export raster to PPM image at the resolution of the current region
-
Export raster to VTK-ASCII
-
Export raster to Virtual Reality Modeling Language (VRML)
-
Export raster to binary MAT-File
-
Export raster to binary array
-
Export raster to text file as x,y,z values based on cell centers
-
Export raster to various formats (GDAL library)
-
Export vector from GRASS
-
Export vector table from GRASS to database format
-
Export vector to DXF
-
Export vector to GML
-
Export vector to Mapinfo
-
Export vector to POV-Ray
-
Export vector to PostGIS (PostgreSQL) database table
-
Export vector to SVG
-
Export vector to Shapefile
-
Export vector to VTK-ASCII
-
Export vector to various formats (OGR library)
-
Exports attribute tables into various format
-
Extract features from vector
-
Extract selected features
-
Extracts terrain parameters from DEM
-
Extrudes flat vector object to 3D with fixed height
-
Extrudes flat vector object to 3D with height based on attribute
-
Fast fourier transform for image processing
-
Feature type (for polygons, choose Boundary)
-
File management
-
Fill lake from seed at given level
-
Fill lake from seed point at given level
-
Fill no-data areas in raster using v.surf.rst splines interpolation
-
Filter and create depressionless elevation map and flow direction map from elevation raster
-
Filter image
-
Find nearest element in vector 'to' for elements in vector 'from'. Various information about this relation may be uploaded to attribute table of input vector 'from'
-
Find shortest path on vector network
-
GRASS MODULES
-
GRASS shell
-
Gaussian kernel density
-
Generalization
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) raster
-
Generate raster of cumulative cost of moving between locations based on cost input raster and starting point(s) vector
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) coordinates
-
Generate raster of cumulative cost of moving between locations, based on elevation and friction input rasters and starting point(s) vector
-
Generate surface
-
Generate vector contour lines
-
Generates area statistics for rasters
-
Georeferencing, rectification, and import Terra-ASTER imagery and DEM using gdalwarp
-
Graphical raster map calculator
-
Help
- 說明
+
Hue Intensity Saturation (HIS) to Red Green Blue (RGB) raster color transform function
-
Hydrologic modelling
-
Imagery
-
Import ASCII raster
-
Import DXF vector
-
Import ESRI ARC/INFO ASCII GRID
-
Import ESRI E00 vector
-
Import GDAL supported raster
-
Import GDAL supported raster and create a fitted location
-
Import GRIDATB.FOR (TOPMODEL)
-
Import MapGen or MatLab vector
-
Import OGR vector
-
Import OGR vector and create a fitted location
-
Import OGR vectors in a given data source combining them in a GRASS vector
-
Import SPOT VGT NDVI
-
Import SRTM HGT
-
Import US-NGA GEOnet Names Server (GNS) country file
-
Import all OGR/PostGIS vectors in a given data source and create a fitted location
-
Import attribute tables in various formats
-
Import binary MAT-File(v4)
-
Import binary raster
-
Import from database into GRASS
-
Import geonames.org country files
-
Import into GRASS
-
Import loaded raster
-
Import loaded raster and create a fitted location
-
Import loaded vector
-
Import loaded vector and create a fitted location
-
Import only some layers of a DXF vector
-
Import raster from ASCII polygon/line
-
Import raster from coordinates using univariate statistics
-
Import raster into GRASS
-
Import raster into GRASS from QGIS view
-
Import raster into GRASS from external data sources in GRASS
-
Import text file
-
Import vector from gps using gpsbabel
-
Import vector from gps using gpstrans
-
Import vector into GRASS
-
Import vector points from database table containing coordinates
-
Input nodes
-
Input table
-
Interpolate surface
-
Inverse distance squared weighting raster interpolation
-
Inverse distance squared weighting raster interpolation based on vector points
-
Inverse fast fourier transform for image processing
-
Join table to existing vector table
-
Layers categories management
-
Line-of-sight raster analysis
-
Link GDAL supported raster as GRASS raster
-
Link GDAL supported raster loaded in QGIS as GRASS raster
-
Link all GDAL supported rasters in a directory as GRASS rasters
-
Loaded layer
-
Locate the closest points between objects in two raster maps
-
Make each output cell function of the values assigned to the corresponding cells in the input rasters
-
Manage features
-
Manage image colors
-
Manage map colors
-
Manage raster cells value
-
Manage training dataset
-
Map algebra
-
Map type conversion
-
MapGen or MatLab vector layer
-
Mask
-
Maximal tolerance value (higher value=more simplification)
-
Metadata support
-
Minimum size for each basin (number of cells)
-
Mosaic up to 4 images
-
Name for new raster file (specify file extension)
-
Name for new vector file (specify file extension)
-
Name for output vector map (optional)
-
Name for the output raster map (optional)
-
Neighborhood analysis
-
Network analysis
-
Network maintenance
-
Number of rows to be skipped
-
Others
-
Output GML file
-
Output Shapefile
- 輸出shape檔
+
Output layer name (used in GML file)
-
Output raster values along user-defined transect line(s)
-
Overlay
-
Overlay maps
-
Path to GRASS database of input location (optional)
-
Path to the OGR data source
-
Percentage of first layer (0-99)
-
Perform affine transformation (shift, scale and rotate, or GPCs) on vector
-
Print projection information from a georeferenced file
-
Print projection information from a georeferenced file and create a new location based on it
-
Print projection information of the current location
-
Projection conversion of vector
-
Projection management
-
Put geometry variables in database
-
Query rasters on their category values and labels
-
Random location perturbations of vector points
-
Randomly partition points into test/train sets
-
Raster
- 影像
+
Raster buffer
-
Raster file matrix filter
-
Raster neighbours analysis
-
Raster support
-
Re-project raster from a location to the current location
-
Rebuild topology of a vector in mapset
-
Rebuild topology of all vectors in mapset
-
Recategorize contiguous cells to unique categories
-
Reclass category values
-
Reclass category values using a column attribute (integer positive)
-
Reclass category values using a rules file
-
Reclass raster using reclassification rules
-
Reclass raster with patches larger than user-defined area size (in hectares)
-
Reclass raster with patches smaller than user-defined area size (in hectares)
-
Reclassify raster greater or less than user-defined area size (in hectares)
-
Recode categorical raster using reclassification rules
-
Recode raster
-
Reconnect vector to a new database
-
Red Green Blue (RGB) to Hue Intensity Saturation (HIS) raster color transformation function
-
Region settings
-
Register external data sources in GRASS
-
Regularized spline with tension raster interpolation based on vector points
-
Reinterpolate and compute topographic analysis using regularized spline with tension and smoothing
-
Remove all lines or boundaries of zero length
-
Remove bridges connecting area and island or 2 islands
-
Remove dangles
-
Remove duplicate area centroids
-
Remove duplicate lines (pay attention to categories!)
-
Remove existing attribute table of vector
-
Remove outliers from vector point data
-
Remove small angles between lines at nodes
-
Remove small areas, the longest boundary with adjacent area is removed
-
Remove vertices in threshold from lines and boundaries, boundary is pruned only if topology is not damaged (new intersection, changed attachement of centroid), first and last segment of the boundary is never changed
-
Rename column in attribute table
-
Reports
-
Reports and statistics
-
Reproject raster from another Location
-
Reproject vector from another Location
-
Resample raster using aggregation
-
Resample raster using interpolation
-
Resample raster. Set new resolution first
-
Rescale the range of category values in raster
-
Sample raster at site locations
-
Save the current region as a named region
-
Select features by attributes
-
Select features overlapped by features in another map
-
Separator (| , etc.)
-
Set PostgreSQL DB connection
-
Set boundary definitions by edge (n-s-e-w)
-
Set boundary definitions for raster
-
Set boundary definitions from raster
-
Set boundary definitions from vector
-
Set boundary definitions to current or default region
-
Set color rules based on stddev from a map's mean value
-
Set general DB connection
-
Set general DB connection with a schema (PostgreSQL only)
-
Set raster color table
-
Set raster color table from existing raster
-
Set raster color table from setted tables
-
Set raster color table from user-defined rules
-
Set region to align to raster
-
Set the region to match multiple rasters
-
Set the region to match multiple vectors
-
Set user/password for driver/database
-
Sets the boundary definitions for a raster map
-
Show database connection for vector
-
Shrink current region until it meets non-NULL data from raster
-
Simple map algebra
-
Simplify vector
-
Snap lines to vertex in threshold
-
Solar and irradiation model
-
Spatial analysis
-
Spatial models
-
Split lines to shorter segments
-
Statistics
-
Sum raster cell values
-
Surface management
-
Tables management
-
Tabulate mutual occurrence (coincidence) of categories for two rasters
-
Take vector stream data, transform it to raster, and subtract depth from the output DEM
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 4 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 5 raster
-
Tasseled Cap (Kauth Thomas) transformation for LANDSAT-TM 7 raster
-
Tassled cap vegetation index
-
Terrain analysis
- 地形分析
+
Tests of normality on vector points
-
Text file
-
Thin no-zero cells that denote line features
-
Toolset for cleaning topology of vector map
-
Topology management
-
Trace a flow through an elevation model
-
Transform cells with value in null cells
-
Transform features
-
Transform image
-
Transform null cells in value cells
-
Transform value cells in null cells
-
Type in map names separated by a comma
-
Update raster statistics
-
Update vector map metadata
-
Upload raster values at positions of vector points to the table
-
Upload vector values at positions of vector points
-
Vector
- 向量
+
Vector buffer
-
Vector geometry analysis
-
Vector intersection
-
Vector non-intersection
-
Vector subtraction
-
Vector union
-
Vector update by other maps
-
Visibility graph construction
-
Voronoi diagram (area)
-
Voronoi diagram (lines)
-
Watershed Analysis
-
Which column for the X coordinate? The first is 1
-
Which column for the Y coordinate?
-
Which column for the Z coordinate? If 0, z coordinate is not used
-
Work with vector points
-
Write only features link to a record
-
Zero-crossing edge detection raster function for image processing
-
optionsDialog
Warning!
-
You need to add some APIs file in order to compile
-
Please specify API file or check "Use preloaded API files"
-
The APIs file was not compiled, click on "Compile APIs..."
-
parent
Cannot parse XML file: %s
-
Cannot open file: %s
-
Invalid CSW connections XML.
-
Loading Connections
- 載入連線中
+
@@ -62376,59 +62504,59 @@ Returns a string representation of a color based on its hue, saturation, value a
Topology Rule Settings
-
Current Rules
-
Add Rule
-
Rule
- 規則
+
Layer #1
-
Layer #2
-
Tolerance
- 容許範圍
+
Layer1ID
-
Layer2ID
-
No layer
- 無圖層
+
Delete Rule
-
@@ -62436,7 +62564,7 @@ Returns a string representation of a color based on its hue, saturation, value a
Invalid second geometry.
-
Topology plugin
-
Invalid first geometry.
-
First geometry invalid in dangling line test.
-
Failed to import first geometry into GEOS in dangling line test.
-
Invalid second geometry in duplicate geometry test.
-
Failed to import second geometry into GEOS in duplicate geometry test.
-
Invalid second geometry in overlaps test.
-
Failed to import second geometry into GEOS in overlaps test.
-
Skipping invalid second geometry of feature %1 in overlaps test.
-
Skipping invalid first geometry in pseudo line test.
-
Failed to import first geometry into GEOS in pseudo line test.
-
Invalid geometry in validity test.
-
Invalid geometry in covering test.
-
Second geometry missing.
-
Second geometry missing or GEOS import failed.
-
Missing geometry in multipart check.
-
First layer not found in registry.
-
Second layer not found in registry.
-
visualThread
Max. len:
-
Min. len:
-
Mean. len:
-
Filled:
-
Empty:
-
N:
-
Mean:
-
StdDev:
-
Sum:
-
Min:
-
Max:
-
CV:
-
Number of unique values:
-
Range:
-
Median:
-
Observed mean distance:
-
Expected mean distance:
-
Nearest neighbour index:
-
Z-Score:
-
@@ -62636,17 +62764,17 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- 表單
+
Open number input dialog
-
...
-
@@ -62654,12 +62782,12 @@ Returns a string representation of a color based on its hue, saturation, value a
Form
- 表單
+
...
-
-
+
\ No newline at end of file
