diff --git a/INSTALL b/INSTALL
index c3a9e28cf12..2eda0f1a3da 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,16 +1,16 @@
 QGIS
 Building QGIS from source - step by step
-Monday January 09, 2017
+Wednesday January 25, 2017
 
 
-Last Updated: Monday January 09, 2017
-Last Change : Monday January 09, 2017
+Last Updated: Wednesday January 25, 2017
+Last Change : Friday January 20, 2017
 
 
   1. Introduction
   2. Overview
   3. Building on GNU/Linux
-    3.1. Building QGIS with Qt 4.x
+    3.1. Building QGIS with Qt 5.x
     3.2. Prepare apt
     3.3. Install build dependencies
     3.4. Setup ccache (Optional)
@@ -18,9 +18,7 @@ Last Change : Monday January 09, 2017
     3.6. Check out the QGIS Source Code
     3.7. Starting the compile
     3.8. Building Debian packages
-    3.9. Building QGIS with Qt 5.x
-    3.10. On Debian Linux
-    3.11. On Fedora Linux
+    3.9. On Fedora Linux
   4. Building on Windows
     4.1. Building with Microsoft Visual Studio
     4.2. Building using MinGW
@@ -139,13 +137,13 @@ those formats in GDAL.
   ========================
 
 
-  3.1. Building QGIS with Qt 4.x
+  3.1. Building QGIS with Qt 5.x
   ==============================
 
 Requires: Ubuntu / Debian derived distro
 
 /!\ Note: Refer to the section Building Debian packages for building
-debian packages.  Unless you plan to develop on QGIS, that is probably the
+debian packages. Unless you plan to develop on QGIS, that is probably the
 easiest option to compile and install QGIS.
 
 These notes are for Ubuntu - other versions and Debian derived distros may
@@ -263,6 +261,11 @@ be pressed several times before the 'g' option becomes available.
 After the 'g' generation is complete, press 'q' to exit the ccmake
 interactive dialog.
 
+/!\ Warning: Make sure that your build directory is completely empty when you 
+enter the command. Do never try to "re-use" an existing Qt4 build directory.
+If you want to use `ccmake` or other interactive tools, run the command in
+the empty build directory once before starting to use the interactive tools.
+
 Now on with the build:
 
   make -jX
@@ -349,56 +352,15 @@ Install them using dpkg.  E.g.:
   sudo debi
 
 
-  3.9. Building QGIS with Qt 5.x
-  ==============================
-
-/!\ Warning: Qt 5 is not officially supported. Building against Qt 5
-libraries seems to work quite well already but be prepared that you are one
-of very few with this setup. We strongly recommend using QGIS with Qt 4 for
-production work.
-
-Python bindings in particular are not expected to be compatible. When Qt 5
-is enabled, the build system automatically activates Python 3 and PyQt5 as well.
-There are no plugins and not even the python code shipped along the QGIS source
-code is compatible with PyQt5.
-
-You have been warned.
-
-
-  3.10. On Debian Linux
-  =====================
-
-We assume that you have the source code of QGIS ready and created a new
-subdirectory called `build` or `build-qt5` in it.
-
-
-    3.10.1. Install build dependencies
-    ==================================
-
-  apt-get install git build-essential cmake flex bison pyqt5-dev qttools5-dev qtpositioning5-dev libqt5svg5-dev libqt5webkit5-dev  libqt5gui5 libqt5scripttools5 qtscript5-dev libqca-qt5-2-dev grass-dev libgeos-dev libgdal-dev libqt5xmlpatterns5-dev libqt5scintilla2-dev pyqt5.qsci-dev python3-pyqt5.qsci libgsl-dev txt2tags libproj-dev libqwt-qt5-dev libspatialindex-dev pyqt5-dev-tools qttools5-dev-tools qt5-default python3-future python3-pyqt5.qtsql python3-psycopg2 python3-sip-dev
-
-Make sure that your build directory is completely empty when you enter the
-following command. Do never try to "re-use" an existing Qt4 build directory.
-If you want to use `ccmake` or other interactive tools, run the following
-command in the empty build directory once before starting to use the
-interactive tools.
-
-  cmake
-
-If everything went ok you can finally start to compile. (As usual append a -jX where X is the number of available cores option to make to speed up your build process)
-
-  make
-
-
-  3.11. On Fedora Linux
-  =====================
+  3.9. On Fedora Linux
+  ====================
 
 We assume that you have the source code of QGIS ready and created a
 new subdirectory called `build` or `build-qt5` in it.
 
 
-    3.11.1. Install build dependencies
-    ==================================
+    3.9.1. Install build dependencies
+    =================================
 
   dnf install qt5-qtwebkit-devel qt5-qtlocation-devel qt5-qttools-static
   qt5-qtscript-devel qca-qt5-devel python3-qt5-devel python3-qscintilla-qt5-devel 
diff --git a/doc/INSTALL.html b/doc/INSTALL.html
index 6815e2c965b..b383635e77a 100644
--- a/doc/INSTALL.html
+++ b/doc/INSTALL.html
@@ -5,7 +5,7 @@
 <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=utf-8">
 <TITLE>QGIS</TITLE>
 
-<!-- Included /home/fischer/src/qgis3/doc/style.css -->
+<!-- Included doc/style.css -->
 <STYLE TYPE="text/css">
 body{  background: white;
   color: black;
@@ -77,13 +77,13 @@ label{  background-color: #FFFFCC;
 <DIV CLASS="header" ID="header">
 <H1>QGIS</H1>
 <H2>Building QGIS from source - step by step</H2>
-<H3>Monday January 09, 2017</H3>
+<H3>Wednesday January 25, 2017</H3>
 </DIV>
 
 <DIV CLASS="body" ID="body">
 <P>
-Last Updated: Monday January 09, 2017
-Last Change : Monday January 09, 2017
+Last Updated: Wednesday January 25, 2017
+Last Change : Friday January 20, 2017
 </P>
 <DIV CLASS="toc">
 
@@ -92,7 +92,7 @@ Last Change : Monday January 09, 2017
   <LI><A HREF="#toc2">Overview</A>
   <LI><A HREF="#toc3">Building on GNU/Linux</A>
     <UL>
-    <LI><A HREF="#toc4">3.1. Building QGIS with Qt 4.x</A>
+    <LI><A HREF="#toc4">3.1. Building QGIS with Qt 5.x</A>
     <LI><A HREF="#toc5">3.2. Prepare apt</A>
     <LI><A HREF="#toc6">3.3. Install build dependencies</A>
     <LI><A HREF="#toc7">3.4. Setup ccache (Optional)</A>
@@ -100,39 +100,37 @@ Last Change : Monday January 09, 2017
     <LI><A HREF="#toc9">3.6. Check out the QGIS Source Code</A>
     <LI><A HREF="#toc10">3.7. Starting the compile</A>
     <LI><A HREF="#toc11">3.8. Building Debian packages</A>
-    <LI><A HREF="#toc12">3.9. Building QGIS with Qt 5.x</A>
-    <LI><A HREF="#toc13">3.10. On Debian Linux</A>
-    <LI><A HREF="#toc14">3.11. On Fedora Linux</A>
+    <LI><A HREF="#toc12">3.9. On Fedora Linux</A>
     </UL>
-  <LI><A HREF="#toc15">Building on Windows</A>
+  <LI><A HREF="#toc13">Building on Windows</A>
     <UL>
-    <LI><A HREF="#toc16">4.1. Building with Microsoft Visual Studio</A>
-    <LI><A HREF="#toc17">4.2. Building using MinGW</A>
-    <LI><A HREF="#toc18">4.3. Creation of MSYS environment for compilation of QGIS</A>
+    <LI><A HREF="#toc14">4.1. Building with Microsoft Visual Studio</A>
+    <LI><A HREF="#toc15">4.2. Building using MinGW</A>
+    <LI><A HREF="#toc16">4.3. Creation of MSYS environment for compilation of QGIS</A>
     </UL>
-  <LI><A HREF="#toc19">Building on MacOS X</A>
+  <LI><A HREF="#toc17">Building on MacOS X</A>
     <UL>
-    <LI><A HREF="#toc20">5.1. Install Developer Tools</A>
-    <LI><A HREF="#toc21">5.2. Install Qt4 from disk image</A>
-    <LI><A HREF="#toc22">5.3. Install CMake for OSX</A>
-    <LI><A HREF="#toc23">5.4. Install development frameworks for QGIS dependencies</A>
-    <LI><A HREF="#toc24">5.5. API documentation</A>
-    <LI><A HREF="#toc25">5.6. QGIS source</A>
-    <LI><A HREF="#toc26">5.7. Configure the build</A>
-    <LI><A HREF="#toc27">5.8. Building</A>
-    <LI><A HREF="#toc28">5.9. Post-Install</A>
+    <LI><A HREF="#toc18">5.1. Install Developer Tools</A>
+    <LI><A HREF="#toc19">5.2. Install Qt4 from disk image</A>
+    <LI><A HREF="#toc20">5.3. Install CMake for OSX</A>
+    <LI><A HREF="#toc21">5.4. Install development frameworks for QGIS dependencies</A>
+    <LI><A HREF="#toc22">5.5. API documentation</A>
+    <LI><A HREF="#toc23">5.6. QGIS source</A>
+    <LI><A HREF="#toc24">5.7. Configure the build</A>
+    <LI><A HREF="#toc25">5.8. Building</A>
+    <LI><A HREF="#toc26">5.9. Post-Install</A>
     </UL>
-  <LI><A HREF="#toc29">Setting up the WCS test server on GNU/Linux</A>
+  <LI><A HREF="#toc27">Setting up the WCS test server on GNU/Linux</A>
     <UL>
-    <LI><A HREF="#toc30">6.1. Preparation</A>
-    <LI><A HREF="#toc31">6.2. Setup mapserver</A>
-    <LI><A HREF="#toc32">6.3. Create a home page</A>
-    <LI><A HREF="#toc33">6.4. Now deploy it</A>
-    <LI><A HREF="#toc34">6.5. Debugging</A>
+    <LI><A HREF="#toc28">6.1. Preparation</A>
+    <LI><A HREF="#toc29">6.2. Setup mapserver</A>
+    <LI><A HREF="#toc30">6.3. Create a home page</A>
+    <LI><A HREF="#toc31">6.4. Now deploy it</A>
+    <LI><A HREF="#toc32">6.5. Debugging</A>
     </UL>
-  <LI><A HREF="#toc35">Setting up a Jenkins Build Server</A>
-  <LI><A HREF="#toc36">Debug output and running tests</A>
-  <LI><A HREF="#toc37">Authors and Acknowledgments</A>
+  <LI><A HREF="#toc33">Setting up a Jenkins Build Server</A>
+  <LI><A HREF="#toc34">Debug output and running tests</A>
+  <LI><A HREF="#toc35">Authors and Acknowledgments</A>
   </OL>
 
 </DIV>
@@ -253,14 +251,14 @@ those formats in GDAL.
 <H1>3. Building on GNU/Linux</H1>
 
 <A NAME="toc4"></A>
-<H2>3.1. Building QGIS with Qt 4.x</H2>
+<H2>3.1. Building QGIS with Qt 5.x</H2>
 
 <P>
 <B>Requires:</B> Ubuntu / Debian derived distro
 </P>
 <P>
 /!\ <B>Note:</B> Refer to the section Building Debian packages for building
-debian packages.  Unless you plan to develop on QGIS, that is probably the
+debian packages. Unless you plan to develop on QGIS, that is probably the
 easiest option to compile and install QGIS.
 </P>
 <P>
@@ -433,6 +431,12 @@ After the 'g' generation is complete, press 'q' to exit the ccmake
 interactive dialog.
 </P>
 <P>
+/!\ <B>Warning:</B> Make sure that your build directory is completely empty when you 
+enter the command. Do never try to "re-use" an existing <B>Qt4</B> build directory.
+If you want to use `ccmake` or other interactive tools, run the command in
+the empty build directory once before starting to use the interactive tools.
+</P>
+<P>
 Now on with the build:
 </P>
 
@@ -574,67 +578,14 @@ sudo debi
 </PRE></div>
 
 <A NAME="toc12"></A>
-<H2>3.9. Building QGIS with Qt 5.x</H2>
-
-<P>
-/!\ <B>Warning:</B> Qt 5 is not officially supported. Building against Qt 5
-libraries seems to work quite well already but be prepared that you are one
-of very few with this setup. We strongly recommend using QGIS with Qt 4 for
-production work.
-</P>
-<P>
-Python bindings in particular are not expected to be compatible. When Qt 5
-is enabled, the build system automatically activates Python 3 and PyQt5 as well.
-There are no plugins and not even the python code shipped along the QGIS source
-code is compatible with PyQt5.
-</P>
-<P>
-You have been warned.
-</P>
-
-<A NAME="toc13"></A>
-<H2>3.10. On Debian Linux</H2>
-
-<P>
-We assume that you have the source code of QGIS ready and created a new
-subdirectory called `build` or `build-qt5` in it.
-</P>
-
-<H3>3.10.1. Install build dependencies</H3>
-
-<div class="code"><PRE>
-apt-get install git build-essential cmake flex bison pyqt5-dev qttools5-dev qtpositioning5-dev libqt5svg5-dev libqt5webkit5-dev  libqt5gui5 libqt5scripttools5 qtscript5-dev libqca-qt5-2-dev grass-dev libgeos-dev libgdal-dev libqt5xmlpatterns5-dev libqt5scintilla2-dev pyqt5.qsci-dev python3-pyqt5.qsci libgsl-dev txt2tags libproj-dev libqwt-qt5-dev libspatialindex-dev pyqt5-dev-tools qttools5-dev-tools qt5-default python3-future python3-pyqt5.qtsql python3-psycopg2 python3-sip-dev
-</PRE></div>
-
-<P>
-Make sure that your build directory is completely empty when you enter the
-following command. Do never try to "re-use" an existing Qt4 build directory.
-If you want to use `ccmake` or other interactive tools, run the following
-command in the empty build directory once before starting to use the
-interactive tools.
-</P>
-
-<div class="code"><PRE>
-cmake
-</PRE></div>
-
-<P>
-If everything went ok you can finally start to compile. (As usual append a -jX where X is the number of available cores option to make to speed up your build process)
-</P>
-
-<div class="code"><PRE>
-make
-</PRE></div>
-
-<A NAME="toc14"></A>
-<H2>3.11. On Fedora Linux</H2>
+<H2>3.9. On Fedora Linux</H2>
 
 <P>
 We assume that you have the source code of QGIS ready and created a
 new subdirectory called `build` or `build-qt5` in it.
 </P>
 
-<H3>3.11.1. Install build dependencies</H3>
+<H3>3.9.1. Install build dependencies</H3>
 
 <div class="code"><PRE>
 dnf install qt5-qtwebkit-devel qt5-qtlocation-devel qt5-qttools-static
@@ -692,10 +643,10 @@ Or install to your system
 make install
 </PRE></div>
 
-<A NAME="toc15"></A>
+<A NAME="toc13"></A>
 <H1>4. Building on Windows</H1>
 
-<A NAME="toc16"></A>
+<A NAME="toc14"></A>
 <H2>4.1. Building with Microsoft Visual Studio</H2>
 
 <P>
@@ -953,7 +904,7 @@ look at:
 <I>ms-windows/osgeo4w/package.cmd</I>
 </P>
 
-<A NAME="toc17"></A>
+<A NAME="toc15"></A>
 <H2>4.2. Building using MinGW</H2>
 
 <P>
@@ -1222,7 +1173,7 @@ tree. Read the READMEfile there and follow the instructions. Next right click
 on qgis.nsi and choose the option 'Compile NSIS Script'. 
 </P>
 
-<A NAME="toc18"></A>
+<A NAME="toc16"></A>
 <H2>4.3. Creation of MSYS environment for compilation of QGIS</H2>
 
 <H3>4.3.1. Initial setup</H3>
@@ -1479,7 +1430,7 @@ We're done with preparation of MSYS environment. Now you can delete all stuff in
 of space and it's not necessary at all.
 </P>
 
-<A NAME="toc19"></A>
+<A NAME="toc17"></A>
 <H1>5. Building on MacOS X</H1>
 
 <P>
@@ -1546,7 +1497,7 @@ so it's just 'make', or using a smaller number.  Sometimes make can hiccup on to
 many threads.
 </P>
 
-<A NAME="toc20"></A>
+<A NAME="toc18"></A>
 <H2>5.1. Install Developer Tools</H2>
 
 <P>
@@ -1603,7 +1554,7 @@ If you have trouble building some of the dependencies listed below with clang
 (e.g. OSG &amp; osgEarth), try using only the LLVM compilers.
 </P>
 
-<A NAME="toc21"></A>
+<A NAME="toc19"></A>
 <H2>5.2. Install Qt4 from disk image</H2>
 
 <P>
@@ -1663,7 +1614,7 @@ may need some help by adding '-L/usr/local/lib' to CMAKE_SHARED_LINKER_FLAGS,
 CMAKE_MODULE_LINKER_FLAGS and CMAKE_EXE_LINKER_FLAGS in the cmake build.
 </P>
 
-<A NAME="toc22"></A>
+<A NAME="toc20"></A>
 <H2>5.3. Install CMake for OSX</H2>
 
 <P>
@@ -1745,7 +1696,7 @@ If you have trouble building some of the dependencies listed below (e.g. OSG &am
 osgEarth), try bypassing ccache.
 </P>
 
-<A NAME="toc23"></A>
+<A NAME="toc21"></A>
 <H2>5.4. Install development frameworks for QGIS dependencies</H2>
 
 <P>
@@ -2418,7 +2369,7 @@ folder in the include/ folder to /Library/Application Support/OpenSceneGraph/Hea
 And as for OSG, you can leave the bin/ executables where they are.
 </P>
 
-<A NAME="toc24"></A>
+<A NAME="toc22"></A>
 <H2>5.5. API documentation</H2>
 
 <P>
@@ -2454,7 +2405,7 @@ QGIS.app bundling on install, inside the app in:
 QGIS.app/Contents/Resources/doc
 </P>
 
-<A NAME="toc25"></A>
+<A NAME="toc23"></A>
 <H2>5.6. QGIS source</H2>
 
 <P>
@@ -2489,7 +2440,7 @@ git merge qgisupstream
 
 </PRE></div>
 
-<A NAME="toc26"></A>
+<A NAME="toc24"></A>
 <H2>5.7. Configure the build</H2>
 
 <P>
@@ -2630,7 +2581,7 @@ non-standard, libs (ie postgres' libpq) set the bundle value to 2:
 -D QGIS_MACAPP_BUNDLE=2 \
 </PRE></div>
 
-<A NAME="toc27"></A>
+<A NAME="toc25"></A>
 <H2>5.8. Building</H2>
 
 <P>
@@ -2658,7 +2609,7 @@ or, for an /Applications build:
 sudo make install
 </PRE></div>
 
-<A NAME="toc28"></A>
+<A NAME="toc26"></A>
 <H2>5.9. Post-Install</H2>
 
 <P>
@@ -2694,7 +2645,7 @@ for instructions on setting up Apache fastcgi and testing Mapserver, including
 installing the mod-fastcgi that is missing on Lion.
 </P>
 
-<A NAME="toc29"></A>
+<A NAME="toc27"></A>
 <H1>6. Setting up the WCS test server on GNU/Linux</H1>
 
 <P>
@@ -2705,7 +2656,7 @@ These notes are for Ubuntu - other versions and Debian derived distros may
 require slight variations in package names.
 </P>
 
-<A NAME="toc30"></A>
+<A NAME="toc28"></A>
 <H2>6.1. Preparation</H2>
 
 <P>
@@ -2725,7 +2676,7 @@ is integrated into master.
   cd cgi-bin/
 </P>
 
-<A NAME="toc31"></A>
+<A NAME="toc29"></A>
 <H2>6.2. Setup mapserver</H2>
 
 <P>
@@ -2791,7 +2742,7 @@ Then create /var/www/wcs/7-wcs.qgis.org.conf setting the contents to this:
   &lt;/VirtualHost&gt;
 </PRE></div>
 
-<A NAME="toc32"></A>
+<A NAME="toc30"></A>
 <H2>6.3. Create a home page</H2>
 
 <div class="code"><PRE>
@@ -2809,7 +2760,7 @@ Set the contents to:
   http://wcs.qgis.org/1.9.0/wcs
 </PRE></div>
 
-<A NAME="toc33"></A>
+<A NAME="toc31"></A>
 <H2>6.4. Now deploy it</H2>
 
 <div class="code"><PRE>
@@ -2822,14 +2773,14 @@ Set the contents to:
   sudo /etc/init.d/apache2 reload
 </PRE></div>
 
-<A NAME="toc34"></A>
+<A NAME="toc32"></A>
 <H2>6.5. Debugging</H2>
 
 <div class="code"><PRE>
   sudo tail -f /var/log/apache2/wcs_qgis.org/error.log
 </PRE></div>
 
-<A NAME="toc35"></A>
+<A NAME="toc33"></A>
 <H1>7. Setting up a Jenkins Build Server</H1>
 
 <P>
@@ -2931,7 +2882,7 @@ I based some of the set up from this nice blog article here:
 <A HREF="http://alexott.blogspot.com/2012/03/jenkins-cmakectest.html">http://alexott.blogspot.com/2012/03/jenkins-cmakectest.html</A>
 </UL>
 
-<A NAME="toc36"></A>
+<A NAME="toc34"></A>
 <H1>8. Debug output and running tests</H1>
 
 <P>
@@ -2997,7 +2948,7 @@ ctest --show-only
 ctest --verbose --tests-regex SomeTestName
 </PRE></div>
 
-<A NAME="toc37"></A>
+<A NAME="toc35"></A>
 <H1>9. Authors and Acknowledgments</H1>
 
 <P>
@@ -3063,5 +3014,5 @@ The following people have contributed to this document:
 
 </DIV>
 <!-- html code generated by txt2tags 2.6 (http://txt2tags.org) -->
-<!-- cmdline: txt2tags -\-encoding=utf-8 -o/home/fischer/src/qgis3/debian/build-master-ninja/doc/INSTALL.html -t html /home/fischer/src/qgis3/doc/INSTALL.t2t -->
+<!-- cmdline: txt2tags -\-encoding=utf-8 -o doc/INSTALL.html -t html doc/INSTALL.t2t -->
 </BODY></HTML>
diff --git a/doc/linux.t2t b/doc/linux.t2t
index a0534c83aa6..453eba7c821 100644
--- a/doc/linux.t2t
+++ b/doc/linux.t2t
@@ -1,12 +1,12 @@
 
 = Building on GNU/Linux =
 
-== Building QGIS with Qt 4.x ==
+== Building QGIS with Qt 5.x ==
 
 **Requires:** Ubuntu / Debian derived distro
 
 /!\ **Note:** Refer to the section ''Building Debian packages'' for building
-debian packages.  Unless you plan to develop on QGIS, that is probably the
+debian packages. Unless you plan to develop on QGIS, that is probably the
 easiest option to compile and install QGIS.
 
 These notes are for Ubuntu - other versions and Debian derived distros may
@@ -129,6 +129,11 @@ be pressed several times before the 'g' option becomes available.
 After the 'g' generation is complete, press 'q' to exit the ccmake
 interactive dialog.
 
+/!\ **Warning:** Make sure that your build directory is completely empty when you 
+enter the command. Do never try to "re-use" an existing **Qt4** build directory.
+If you want to use `ccmake` or other interactive tools, run the command in
+the empty build directory once before starting to use the interactive tools.
+
 Now on with the build:
 
 ```
@@ -238,47 +243,6 @@ Install them using dpkg.  E.g.:
 sudo debi
 ```
 
-== Building QGIS with Qt 5.x ==
-
-/!\ **Warning:** Qt 5 is not officially supported. Building against Qt 5
-libraries seems to work quite well already but be prepared that you are one
-of very few with this setup. We strongly recommend using QGIS with Qt 4 for
-production work.
-
-Python bindings in particular are not expected to be compatible. When Qt 5
-is enabled, the build system automatically activates Python 3 and PyQt5 as well.
-There are no plugins and not even the python code shipped along the QGIS source
-code is compatible with PyQt5.
-
-You have been warned.
-
-== On Debian Linux ==
-
-We assume that you have the source code of QGIS ready and created a new
-subdirectory called `build` or `build-qt5` in it.
-
-=== Install build dependencies ===
-
-```
-apt-get install git build-essential cmake flex bison pyqt5-dev qttools5-dev qtpositioning5-dev libqt5svg5-dev libqt5webkit5-dev  libqt5gui5 libqt5scripttools5 qtscript5-dev libqca-qt5-2-dev grass-dev libgeos-dev libgdal-dev libqt5xmlpatterns5-dev libqt5scintilla2-dev pyqt5.qsci-dev python3-pyqt5.qsci libgsl-dev txt2tags libproj-dev libqwt-qt5-dev libspatialindex-dev pyqt5-dev-tools qttools5-dev-tools qt5-default python3-future python3-pyqt5.qtsql python3-psycopg2 python3-sip-dev
-```
-
-Make sure that your build directory is completely empty when you enter the
-following command. Do never try to "re-use" an existing Qt4 build directory.
-If you want to use `ccmake` or other interactive tools, run the following
-command in the empty build directory once before starting to use the
-interactive tools.
-
-```
-cmake
-```
-
-If everything went ok you can finally start to compile. (As usual append a -jX where X is the number of available cores option to make to speed up your build process)
-
-```
-make
-```
-
 == On Fedora Linux ==
 
 We assume that you have the source code of QGIS ready and created a