On ARM platforms where the baseline CPU target lacks CRC instructions,
we need to supply a -march flag to persuade the compiler to compile
such instructions. It turns out that our existing choice of
"-march=armv8-a+crc" has not worked for some time, because recent gcc
will interpret that as selecting software floating point, and then
will spit up if the platform requires hard-float ABI, as most do
nowadays. The end result was to silently fall back to software CRC,
which isn't very desirable since in practice almost all currently
produced ARM chips do have hardware CRC.
We can fix this by using "-march=armv8-a+crc+simd" to enable the
correct ABI choice. (This has no impact on the code actually
generated, since neither of the files we compile with this flag
does any floating-point stuff, let alone SIMD.) Keep the test for
"-march=armv8-a+crc" since that's required for soft-float ABI,
but try that second since most platforms we're likely to build on
use hard-float.
Since this isn't working as-intended on the last several years'
worth of gcc releases, back-patch to all supported branches.
Discussion: https://postgr.es/m/4496616.iHFcN1HehY@portable-bastien
Previously we checked "for <stdbool.h> that conforms to C99" using
autoconf's AC_HEADER_STDBOOL macro. We've required C99 since PostgreSQL
12, so the test was redundant, and under C23 it was broken: autoconf
2.69's implementation doesn't understand C23's new empty header (the
macros it's looking for went away, replaced by language keywords).
Later autoconf versions fixed that, but let's just remove the
anachronistic test.
HAVE_STDBOOL_H and HAVE__BOOL will no longer be defined, but they
weren't directly tested in core or likely extensions (except in 11, see
below). PG_USE_STDBOOL (or USE_STDBOOL in 11 and 12) is still defined
when sizeof(bool) is 1, which should be true on all modern systems.
Otherwise we define our own bool type and values of size 1, which would
fail to compile under C23 as revealed by the broken test. (We'll
probably clean that dead code up in master, but here we want a minimal
back-patchable change.)
This came to our attention when GCC 15 recently started using using C23
by default and failed to compile the replacement code, as reported by
Sam James and build farm animal alligator.
Back-patch to all supported releases, and then two older versions that
also know about <stdbool.h>, per the recently-out-of-support policy[1].
12 requires C99 so it's much like the supported releases, but 11 only
assumes C89 so it now uses AC_CHECK_HEADERS instead of the overly picky
AC_HEADER_STDBOOL. (I could find no discussion of which historical
systems had <stdbool.h> but failed the conformance test; if they ever
existed, they surely aren't relevant to that policy's goals.)
[1] https://wiki.postgresql.org/wiki/Committing_checklist#Policies
Reported-by: Sam James <sam@gentoo.org>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org> (master version)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (approach)
Discussion: https://www.postgresql.org/message-id/flat/87o72eo9iu.fsf%40gentoo.org
If the executable's .o files were produced by a compiler (probably gcc)
not using -moutline-atomics, and the corresponding .bc files were
produced by clang using -moutline-atomics (probably by default), then
the generated bitcode functions would have the target attribute
"+outline-atomics", and could fail at runtime when inlined. If the
target ISA at bitcode generation time was armv8-a (the most conservative
aarch64 target, no LSE), then LLVM IR atomic instructions would generate
calls to functions in libgcc.a or libclang_rt.*.a that switch between
LL/SC and faster LSE instructions depending on a runtime AT_HWCAP check.
Since the corresponding .o files didn't need those functions, they
wouldn't have been included in the executable, and resolution would
fail.
At least Debian and Ubuntu are known to ship gcc and clang compilers
that target armv8-a but differ on the use of outline atomics by default.
Fix, by suppressing the outline atomics attribute in bitcode explicitly.
Inline LL/SC instructions will be generated for atomic operations in
bitcode built for armv8-a. Only configure scripts are adjusted for now,
because the meson build system doesn't generate bitcode yet.
This doesn't seem to be a new phenomenon, so real cases of functions
using atomics that are inlined by JIT must be rare in the wild given how
long it took for a bug report to arrive. The reported case could be
reduced to:
postgres=# set jit_inline_above_cost = 0;
SET
postgres=# set jit_above_cost = 0;
SET
postgres=# select pg_last_wal_receive_lsn();
WARNING: failed to resolve name __aarch64_swp4_acq_rel
FATAL: fatal llvm error: Program used external function
'__aarch64_swp4_acq_rel' which could not be resolved!
The change doesn't affect non-ARM systems or later target ISAs.
Back-patch to all supported releases.
Reported-by: Alexander Kozhemyakin <a.kozhemyakin@postgrespro.ru>
Discussion: https://postgr.es/m/18610-37bf303f904fede3%40postgresql.org
This commit modifies the build scripts so that `llvmjit.so` links
LLVM statically instead of dynamically. No other binary affected,
the change shouldn't be user visible at all.
The memory footprint of postgres is also unaffected: only the
`llvmjit.so` dynamic library is affected. If postgres doesn't use
JIT, the LLVM library isn't loaded, as before. If it uses JIT, it
is loaded as part of `llvmjit.so`, sa before.
The only change is the binary size of `llvmjit.so`.
Revert changes made before so the version won't break tools' expectations
the output with changes:
```
# select version();
version
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Percona Server for PostgreSQL 17.2 - Percona Server for PostgreSQL 17.2.1 on aarch64-unknown-linux-gnu, compiled by gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, 64-bit
(1 row)
```
Fix PG-1242
This commit:
- Adds build infrastructure for the frontend tools to compile with pg_tde. pg_tde dependencies will be built only if build flag `precone_ext` is on. It also makes `openssl` and `curl` required if `precone_ext` is on.
- Makes pg_waldump work with the TDE encrypted WAL. If user set `-k` flag it will try to init tde keys etc and decode encrypted pages. If no `-k` options set, it behaves like community version - won't try to ini tde and won't be able to decrypt WAL.
- Adds tap tests for encrypted WAL to pg_waldump.
- Fixes Percona versioning in ./configure
For PG-1003, PG-1005
Depends https://github.com/percona/pg_tde/pull/362
The original part of the version is kept as is, and Percona specific
information is added after.
For example, psql displays the following after this commit:
SELECT version();
PostgreSQL 17.0.1 (Percona Server for PostgreSQL) on x86_64-pc-linux-gnu, compiled by gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, 6
4-bit
Where the addition is ".1 (Percona Server for PostgreSQL)", with the
".1" being the Percona version number.
Similarly, commands show the same information:
bin/pg_ctl --version
pg_ctl (PostgreSQL) 17.0.1 (Percona Server for PostgreSQL)
OpenSSL supports two types of session tickets for TLSv1.3, stateless
and stateful. The option we've used only turns off stateless tickets
leaving stateful tickets active. Use the new API introduced in 1.1.1
to disable all types of tickets.
Backpatch to all supported versions.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240617173803.6alnafnxpiqvlh3g@awork3.anarazel.de
Backpatch-through: v12
Previously we searched for llvm-config-N and clang-N as well as the
unversioned names, and maintained a list of expected values of N. There
doesn't seem to be any reason to think that the default llvm-config and
clang won't be good enough, and if they aren't, they can be overridden
with LLVM_CONFIG and CLANG, so let's stop maintaining that list.
The list had not been updated since LLVM 7 with no complaints, so commit
820b5af73dc probably should have just removed it when dropping support
for 7, instead of trying to be helpful by bringing it up to date with
recent version numbers.
The Meson build system didn't have that, so no change there.
Suggested-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKG%2BSOP-aR%3DYF_n0dtXGWeCy6x%2BCn-RMWURU5ySQdmeKW1Q%40mail.gmail.com
In e6927270cd1 I added a 'touch meson.build' to configure.ac, to ensure
conflicts between in-tree configure based builds and meson builds are
automatically detected. Unfortunately I omitted spaces around the condition
restricting this to in-tree builds, leading to touch meson.build to also be
executed in vpath builds. While the only consequence of this buglet is an
unnecessary empty file in build directories, it seems worth backpatching.
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/20240417230002.mb2gv3hyetyn67gk@awork3.anarazel.de
Backpatch: 16-, where the meson based build was added
Presently, pg_popcount() processes data in 32-bit or 64-bit chunks
when possible. Newer hardware that supports AVX-512 instructions
can use 512-bit chunks, which provides a nice speedup, especially
for larger buffers. This commit introduces the infrastructure
required to detect compiler and CPU support for the required
AVX-512 intrinsic functions, and it adds a new pg_popcount()
implementation that uses these functions. If CPU support for this
optimized implementation is detected at runtime, a function pointer
is updated so that it is used by subsequent calls to pg_popcount().
Most of the existing in-tree calls to pg_popcount() should benefit
from these instructions, and calls with smaller buffers should at
least not regress compared to v16. The new infrastructure
introduced by this commit can also be used to optimize
visibilitymap_count(), but that is left for a follow-up commit.
Co-authored-by: Paul Amonson, Ants Aasma
Reviewed-by: Matthias van de Meent, Tom Lane, Noah Misch, Akash Shankaran, Alvaro Herrera, Andres Freund, David Rowley
Discussion: https://postgr.es/m/BL1PR11MB5304097DF7EA81D04C33F3D1DCA6A%40BL1PR11MB5304.namprd11.prod.outlook.com
The copy_file_range() system call is available on at least Linux and
FreeBSD, and asks the kernel to use efficient ways to copy ranges of a
file. Options available to the kernel include sharing block ranges
(similar to --clone mode), and pushing down block copies to the storage
layer.
For automated testing, see PG_TEST_PG_UPGRADE_MODE. (Perhaps in a later
commit we could consider setting this mode for one of the CI targets.)
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGKe7Hb0-UNih8VD5UNZy5-ojxFb3Pr3xSBBL8qj2M2%3DdQ%40mail.gmail.com
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
Commit 5579388d removed code that supplied a fallback implementation of
getaddrinfo(), which was dead code on modern systems. One tiny piece of
the removed code was still doing something useful on Windows, though:
that OS's own gai_strerror()/gai_strerrorA() function returns a pointer
to a static buffer that it overwrites each time, so it's not
thread-safe. In rare circumstances, a multi-threaded client program
could get an incorrect or corrupted error message.
Restore the replacement gai_strerror() function, though now that it's
only for Windows we can put it into a win32-specific file and cut it
down to the errors that Windows documents. The error messages here are
taken from FreeBSD, because Windows' own messages seemed too verbose.
Back-patch to 16.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKz%2BF9d2PTiXwfYV7qJw%2BWg2jzACgSDgPizUw7UG%3Di58A%40mail.gmail.com
Injection points are a new facility that makes possible for developers
to run custom code in pre-defined code paths. Its goal is to provide
ways to design and run advanced tests, for cases like:
- Race conditions, where processes need to do actions in a controlled
ordered manner.
- Forcing a state, like an ERROR, FATAL or even PANIC for OOM, to force
recovery, etc.
- Arbitrary sleeps.
This implements some basics, and there are plans to extend it more in
the future depending on what's required. Hence, this commit adds a set
of routines in the backend that allows developers to attach, detach and
run injection points:
- A code path calling an injection point can be declared with the macro
INJECTION_POINT(name).
- InjectionPointAttach() and InjectionPointDetach() to respectively
attach and detach a callback to/from an injection point. An injection
point name is registered in a shmem hash table with a library name and a
function name, which will be used to load the callback attached to an
injection point when its code path is run.
Injection point names are just strings, so as an injection point can be
declared and run by out-of-core extensions and modules, with callbacks
defined in external libraries.
This facility is hidden behind a dedicated switch for ./configure and
meson, disabled by default.
Note that backends use a local cache to store callbacks already loaded,
cleaning up their cache if a callback has found to be removed on a
best-effort basis. This could be refined further but any tests but what
we have here was fine with the tests I've written while implementing
these backend APIs.
Author: Michael Paquier, with doc suggestions from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
For the trivial case of iovcnt == 1, kernels are measurably slower at
dealing with the more complex arguments of preadv/pwritev than the
equivalent plain old pread/pwrite. The overheads are worth it for
iovcnt > 1, but for 1 let's just redirect to the cheaper calls. While
we could leave it to callers to worry about that, we already have to
have our own pg_ wrappers for portability reasons so it seems
reasonable to centralize this knowledge there (thanks to Heikki for this
suggestion). Try to avoid function call overheads by making them
inlinable, which might also allow the compiler to avoid the branch in
some cases. For systems that don't have preadv and pwritev (currently:
Windows and [closed] Solaris), we might as well pull the replacement
functions up into the static inline functions too.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
This information is useful to know when scanning buildfarm results, and
it is already displayed in Meson. The output of `openssl version` is
logged, with the command retrieved from PATH.
This depends on c8e4030d1bdd, so backpatch down to 16.
Reviewed-by: Peter Eisentraut, Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/ZTW9yOlZaSVoFhTz@paquier.xyz
Backpatch-through: 16
When scanning build farm results, it's useful to be able to see which
version is in use. For the Meson build system, this information was
already displayed.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/4022690.1697852728%40sss.pgh.pa.us
Commit d2e15083 got rid of the main configure probe and HAVE_FDATASYNC
macro, but we still searched -lrt and -lposix4 for old Solaris systems.
It's in the C library on modern Solaris, as on other supported systems.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/CA%2BhUKGLLVx4drdvXats9PxH3eeB%2BE2NkJReJ%2BRGmaOpU%3D9rgEA%40mail.gmail.com
As with the Intel and Arm CRC instructions, compiler intrinsics for
them must be supported by the compiler. In contrast, no runtime check
is needed. Aligned memory access is faster, so use the Arm coding as
a model.
YANG Xudong
Discussion: https://postgr.es/m/b522a0c5-e3b2-99cc-6387-58134fb88cbe%40ymatrix.cn
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
Historically this module dealt with thread-safety of system interfaces,
but now all that's left is wrapper code for user name and home directory
lookup. Arguably the Windows variants of this logic could be moved in
here too, to justify its presence under port. For now, just tidy up
some obsolete references to multi-threading, and give the file a
meaningful name.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
locale_t is defined by POSIX.1-2008 and SUSv4, and available on all
targeted systems. For Windows, win32_port.h redirects to a partial
implementation called _locale_t. We can now remove a lot of
compile-time tests for HAVE_LOCALE_T, and associated comments and dead
code branches that were needed for older computers.
Since configure + MinGW builds didn't detect locale_t but now we assume
that all systems have it, further inconsistencies among the 3 Windows build
systems were revealed. With this commit, we no longer define
HAVE_WCSTOMBS_L and HAVE_MBSTOWCS_L on any Windows build system, but
we have logic to deal with that so that replacements are available where
appropriate.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGLg7_T2GKwZFAkEf0V7vbnur-NfCjZPKZb%3DZfAXSV1ORw%40mail.gmail.com
The comments referring to SSL_CTX_set_cert_cb() in ./configure and
./configure.ac were inconsistent, as `autoreconf -i` would show. While
on it, fix a typo on a comment related to the same check in
meson.build.
Issue introduced in 8e278b6, that removed support for OpenSSL 1.0.1.
Per offlist report from Thomas Munro.
Here are some notes about this change:
- As X509_get_signature_nid() should always exist (OpenSSL and
LibreSSL), hence HAVE_X509_GET_SIGNATURE_NID is now gone.
- OPENSSL_API_COMPAT is bumped to 0x10002000L.
- One comment related to 1.0.1e introduced by 74242c2 is removed.
Upstream OpenSSL still provides long-term support for 1.0.2 in a closed
fashion, so removing it is out of scope for a few years, at least.
Reviewed-by: Jacob Champion, Daniel Gustafsson
Discussion: https://postgr.es/m/ZG3JNursG69dz1lr@paquier.xyz
