Now that ATExecDropConstraint doesn't recurse anymore, so it's wrong to
test privileges "during recursion" there. Move the check to
dropconstraint_internal, which is the place where recursion occurs.
In passing, remove now-useless 'recursing' argument to
ATExecDropConstraint.
Discussion: https://postgr.es/m/202309051744.y4mndw5gwzhh@alvherre.pgsql
Now that we have catalogued not-null constraints, our information_schema
definition can be updated to grab those rather than fabricate synthetic
definitions.
Note that we still don't have catalog rows for not-null constraints on
domains, but we've never had not-null constraints listed in
information_schema, so that's a problem to be solved separately.
Co-authored-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/81b461c4-edab-5d8c-2f88-203108425340@enterprisedb.com
Discussion: https://postgr.es/m/202309041710.psytrxlsiqex@alvherre.pgsql
We shouldn't be doing non-trivial work in signal handlers in general,
and in this case the handler could reach unsafe code and corrupt state.
It also clobbered its own "reason" code.
Move all recovery conflict decision logic into the next
CHECK_FOR_INTERRUPTS(), and have the signal handler just set flags and
the latch, following the standard pattern. Since there are several
different "reasons", use a separate flag for each.
With this refactoring, the recovery conflict system no longer
piggy-backs on top of the regular query cancelation mechanism, but
instead raises an error directly if it decides that is necessary. It
still needs to respect QueryCancelHoldoffCount, because otherwise the
FEBE protocol might get out of sync (see commit 2b3a8b20c2d).
This fixes one class of intermittent failure in the new
031_recovery_conflict.pl test added by commit 9f8a050f, though the buggy
coding is much older. Failures outside contrived testing seem to be
very rare (or perhaps incorrectly attributed) in the field, based on
lack of reports.
No back-patch for now due to complexity and release schedule. We have
the option to back-patch into 16 later, as 16 has prerequisite commit
bea3d7e.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Michael Paquier <michael@paquier.xyz> (earlier version)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Tested-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Discussion: https://postgr.es/m/CALj2ACVr8au2J_9D88UfRCi0JdWhyQDDxAcSVav0B0irx9nXEg%40mail.gmail.com
This commit renames RecoveryInitSyncMethod to DataDirSyncMethod and
moves it to common/file_utils.h. This is preparatory work for a
follow-up commit that will allow specifying the synchronization
method in frontend utilities such as pg_upgrade and pg_basebackup.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZN2ZB4afQ2JbR9TA%40paquier.xyz
This file is now made of two columns, removing the column listing the
user-visible strings used in the system views and the documentation:
- Enum definitions for each class without the prefix "WAIT_EVENT_", so
as this information can be grepped in the code and wait_event_names.txt
at the same time.
- Description in the documentation.
The wait event names are now generated from the enum objects in
CamelCase, with the underscores removed. The data generated for wait
events is consistent with what was produced by 414f6c0fb79a.
This has the advantage to remove WAIT_EVENT_DOCONLY, which was a
placeholder for the wait event types Lock and LWLock as these two only
require the generation of the documentation.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/ZOxVHQwEC/9X/p/z@paquier.xyz
The event names use the same case-insensitive characters, hence applying
lower() or upper() to the monitoring queries allows the detection of the
same events as before this change. It is possible to cross-check the
data with the system view pg_wait_events, for instance, with a query
like that showing no differences:
SELECT lower(type), lower(name), description
FROM pg_wait_events ORDER BY 1, 2;
This will help in the introduction of more simplifications in the format
of wait_event_names. Some of the enum values in the code had to be
renamed a bit to follow the same convention naming across the board.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/ZOxVHQwEC/9X/p/z@paquier.xyz
Presently, frontend code that needs to use these macros must either
include storage/fd.h, which declares several frontend-unsafe
functions, or duplicate the macros. This commit moves these macros
to common/file_utils.h, which is safe for both frontend and backend
code. Consequently, we can also remove the duplicated macros in
pg_checksums and stop including storage/fd.h in pg_rewind.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZOP5qoUualu5xl2Z%40paquier.xyz
This lock was introduced before memory barrier support was added,
and it is only used to guarantee proper memory ordering when
KnownAssignedXidsAdd() appends to the array without a lock. Now
that such memory barrier support exists, we can remove the lock and
use barriers instead.
Suggested-by: Tom Lane
Author: Michail Nikolaev
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/CANtu0oh0si%3DjG5z_fLeFtmYcETssQ08kLEa8b6TQqDm_cinroA%40mail.gmail.com
If all the bits of a key in a tsvector are true (marked with ALLISTRUE),
gtsvectorout() would show the following description:
"0 true bits, 0 false bits"
This is confusing, as all the bits are true, but this would be
equivalent to the information if siglen is 0.
This commit improves the output so as "all true bits" show instead in
this case. Alexander has proposed a regression test for pageinspect,
not included here as it is rather expensive compared to its coverage
value.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/17950-6c80a8d2b94ec695@postgresql.org
This could lead to an imprecise choice when splitting an index page of a
GiST index on a tsvector, deciding which entries should remain on the
old page and which entries should move to a new page.
This is wrong since tsearch2 has been moved into core with commit
140d4ebcb46e, so backpatch all the way down. This error has been
spotted by valgrind.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/17950-6c80a8d2b94ec695@postgresql.org
Backpatch-through: 11
Dropping a database while a connection is attempted on it was able to
lead to the presence of valid database entries in shared statistics.
The issue is that MyDatabaseId was getting set too early than it should,
as, if the connection attempted on the dropped database fails when
renamed or dropped, the shutdown callback of the shared statistics would
finish by re-inserting a correct entry related to the database already
dropped.
As analyzed by the bug reporters, this issue could lead to phantom
entries in the database list maintained by the autovacuum launcher
(in rebuild_database_list()) if the database dropped was part of the
database list when it was still valid. After the database was dropped,
it would remain the highest on the list of databases to considered by
the autovacuum worker as things to process. This would prevent
autovacuum jobs to happen on all the other databases still present.
The commit fixes this issue by delaying setting MyDatabaseId until the
database existence has been re-checked with the second scan on
pg_database after getting a shared lock on it, and by switching
pgstat_update_dbstats() so as nothing happens if MyDatabaseId is not
valid.
Issue introduced by 5891c7a8ed8f, so backpatch down to 15.
Reported-by: Will Mortensen, Jacob Speidel
Analyzed-by: Will Mortensen, Jacob Speidel
Author: Andres Freund
Discussion: https://postgr.es/m/17973-bca1f7d5c14f601e@postgresql.org
Backpatch-through: 15
When a partitioned table has a primary key, trying to find the
corresponding not-null constraint for that column would come up empty,
causing code that's trying to check said not-null constraint to crash.
Fix by only running the check when the not-null constraint exists.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d57b4a69-7394-3146-5976-9a1ef27e7972@gmail.com
The comment in heapgettup_advance_block() says that it reports the
scan position before checking for end of scan, but that didn't match
the code. The code was refactored in commit 7ae0ab0ad9, which
inadvertently changed the order of the check and reporting. Change it
back.
This caused a few regression test failures with a small shared_buffers
setting like 10 MB. The 'portals' and 'cluster' tests perform seqscans
that are large enough that sync seqscans kick in. When the sync scan
position is not updated at end of scan, the next seq scan doesn't
start at the beginning of the table, and the test queries are
sensitive to that.
Reviewed-by: Melanie Plageman, David Rowley
Discussion: https://www.postgresql.org/message-id/6f991389-ae22-d844-a9d8-9aceb7c01a9a@iki.fi
Backpatch-through: 16
There was some confusion in the ObjectProperty entry for transforms.
Some fields had values that were apparently meant for a different
field. Also, some fields were not assigned, which is okay for most
fields, but not for all. In particular, for .oid_catcache_id,
.name_catcache_id, and .objtype, zero is a valid value, so we need to
use -1 if not applicable. It has apparently been like that from the
very beginning (commit cac7658205). The faulty values were not
actually reachable, so it's not a big problem in practice, but we
should make it correct.
Discussion: https://www.postgresql.org/message-id/flat/75ae5875-3abc-dafc-8aec-73247ed41cde@eisentraut.org
The code is able to compile already without warnings under
-Wshadow=compatible-local, which is itself already enabled in the tree,
and the ones fixed here showed up with the more restrictive -Wshadow.
There are more of these that we may want to look at, and the ones fixed
here made the code confusing.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+PuR0y4ofNOxi691VTVWmBfScHV9AaBMGSpeh8+DKp81Nw@mail.gmail.com
Unlike the other pg_stat_get_backend* functions,
pg_stat_get_backend_subxact() looks up the backend entry by using
its integer argument as a 1-based index in an internal array. The
other functions look for the entry with the matching session
backend ID. These numbers often match, but that isn't reliably
true.
This commit resolves this discrepancy by introducing
pgstat_get_local_beentry_by_backend_id() and using it in
pg_stat_get_backend_subxact(). We cannot use
pgstat_get_beentry_by_backend_id() because it returns a
PgBackendStatus, which lacks the locally computed additions
available in LocalPgBackendStatus that are required by
pg_stat_get_backend_subxact().
Author: Ian Barwick
Reviewed-by: Sami Imseih, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/CAB8KJ%3Dj-ACb3H4L9a_b3ZG3iCYDW5aEu3WsPAzkm2S7JzS1Few%40mail.gmail.com
Backpatch-through: 16
Presently, pgstat_fetch_stat_beentry() accepts a session's backend
ID as its argument, and pgstat_fetch_stat_local_beentry() accepts a
1-based index in an internal array as its argument. The former is
typically used wherever a user must provide a backend ID, and the
latter is usually used internally when looping over all entries in
the array. This difference was first introduced by d7e39d72ca.
Before that commit, both functions accepted a 1-based index to the
internal array.
This commit renames these two functions to make it clear whether
they use the backend ID or the 1-based index to look up the entry.
This is preparatory work for a follow-up change that will introduce
a function for looking up a LocalPgBackendStatus using a backend
ID.
Reviewed-by: Ian Barwick, Sami Imseih, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/CAB8KJ%3Dj-ACb3H4L9a_b3ZG3iCYDW5aEu3WsPAzkm2S7JzS1Few%40mail.gmail.com
Backpatch-through: 16
nFreeBlocks, defined as a long, stores the number of free blocks in a
logical tape. ltsGetFreeBlock() has been using an int to store the
value of nFreeBlocks, which could lead to overflows on platforms where
long and int are not the same size (in short everything except Windows
where long is 4 bytes).
The problematic intermediate variable is switched to be a long instead
of an int.
Issue introduced by c02fdc9223015, so backpatch down to 13.
Author: Ranier vilela
Reviewed-by: Peter Geoghegan, David Rowley
Discussion: https://postgr.es/m/CAEudQApLDWCBR_xmwNjGBrDo+f+S4E87x3s7-+hoaKqYdtC4JQ@mail.gmail.com
Backpatch-through: 13
It makes no sense to add a NO INHERIT not-null constraint to a child
table that already has one in that column inherited from its parent.
Disallow that, and add tests for the relevant cases.
Per complaint from Kyotaro Horiguchi. I also used part of his proposed
patch.
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230828.161658.1184657435220765047.horikyota.ntt@gmail.com
The logical_replication_mode GUC is intended for testing and debugging
purposes, but its current name may be misleading and encourage users to make
unnecessary changes.
To avoid confusion, renaming the GUC to a less misleading name
debug_logical_replication_streaming that casual users are less likely to mistakenly
assume needs to be modified in a regular logical replication setup.
Author: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d672d774-c44b-6fec-f993-793e744f169a%40eisentraut.org
After commit b0bea38705, syslogger prints 63 warnings about failing to
close a listen socket at postmaster startup. That's because the
syslogger process forks before the ListenSockets array is initialized,
so ClosePostmasterPorts() calls "close(0)" 64 times. The first call
succeeds, because fd 0 is stdin.
This has been like this since commit 9a86f03b4e in version 13, which
moved the SysLogger_Start() call to before initializing ListenSockets.
We just didn't notice until commit b0bea38705 added the LOG message.
Reported by Michael Paquier and Jeff Janes.
Author: Michael Paquier
Discussion: https://www.postgresql.org/message-id/ZOvvuQe0rdj2slA9%40paquier.xyz
Discussion: https://www.postgresql.org/message-id/ZO0fgDwVw2SUJiZx@paquier.xyz#482670177eb4eaf4c9f03c1eed963e5f
Backpatch-through: 13
Since its introduction in 10074651e335, pg_promote() has been returning
a false status in three cases:
- SIGUSR1 not sent to the postmaster process.
- Postmaster death during standby promotion.
- Standby not promoted within the specified wait time.
An application calling this function will have a hard time understanding
what a false state returned actually means.
Per discussion, this switches the two first states to fail rather than
return a "false" status, making the second case more consistent with the
existing CHECK_FOR_INTERRUPTS in the wait loop. False is only returned
when the promotion is not completed within the specified time (60s by
default).
Author: Ashutosh Sharma
Reviewed-by: Fujii Masao, Laurenz Albe, Michael Paquier
Discussion: https://postgr.es/m/CAE9k0P=QTrwptL0t4J0fuBRDDjgsT-0PVKd-ikd96i1hyL7Bcg@mail.gmail.com
Make the primary messages more compact and make the detail messages
uniform. In initdb.c and pg_resetwal.c, use the newish
option_parse_int() to simplify some of the option parsing. For the
backend GUC wal_segment_size, add a GUC check hook to do the
verification instead of coding it in bootstrap.c. This might be
overkill, but that way the check is in the right place and it becomes
more self-documenting.
In passing, make pg_controldata use the logging API for warning
messages.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/9939aa8a-d7be-da2c-7715-0a0b5535a1f7@eisentraut.org
Interval values now generate an error when the user has multiple
consecutive units or a unit without a value. Previously, it was
possible to specify multiple units consecutively which is contrary to
what the documentation allows, so it was possible to finish with
confusing interval values.
This is a follow-up of the work done in 165d581f146b.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
This commit Restrict the unit "ago" to only appear at the end of the
interval. According to the documentation, a direction can only be
defined at the end of an interval, but it was possible to define it in
the middle of the string or define it multiple times.
In spirit, this is similar to the error handling improvements done in
5b3c5953553b or bcc704b524904.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
This commit removes some dead code related to the unit type RESERV,
whose last use has been removed from the unit lookup table used for
intervals ("deltatktbl" in datetime.c) in 666cbae16da4. Before that,
RESERV was used as an equivalent of "invalid", but that's now
unreachable.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
This commit switches query jumbling so as prepared statement names are
treated as constants in DeallocateStmt. A boolean field is added to
DeallocateStmt to make a distinction between ALL and named prepared
statements, as "name" was used to make this difference before, NULL
meaning DEALLOCATE ALL.
Prior to this commit, DEALLOCATE was not tracked in pg_stat_statements,
for the reason that it was not possible to treat its name parameter as a
constant. Now that query jumbling applies to all the utility nodes,
this reason does not apply anymore.
Like 638d42a3c520, this can be a huge advantage for monitoring where
prepared statement names are randomly generated, preventing bloat in
pg_stat_statements. A couple of tests are added to track the new
behavior.
Author: Dagfinn Ilmari Mannsåker, Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/ZMhT9kNtJJsHw6jK@paquier.xyz
Adding an extra LOG for connections that have not set an authn ID, like
when the "trust" authentication method is used, is useful for audit
purposes.
A couple of TAP tests for SSL and authentication need to be tweaked to
adapt to this new LOG generated, as some scenarios expected no logs but
they now get a hit.
Reported-by: Shaun Thomas
Author: Jacob Champion
Reviewed-by: Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CAFdbL1N7-GF-ZXKaB3XuGA+CkSmnjFvqb8hgjMnDfd+uhL2u-A@mail.gmail.com
We now create contype='n' pg_constraint rows for not-null constraints.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. We also spawn not-null constraints
for inheritance child tables when their parents have primary keys.
These related constraints mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations: for example, as opposed to CHECK constraints, we don't
match not-null ones by name when descending a hierarchy to alter it,
instead matching by column name that they apply to. This means we don't
require the constraint names to be identical across a hierarchy.
For now, we omit them for system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
psql shows these constraints in \d+.
pg_dump requires some ad-hoc hacks, particularly when dumping a primary
key. We now create one "throwaway" not-null constraint for each column
in the PK together with the CREATE TABLE command, and once the PK is
created, all those throwaway constraints are removed. This avoids
having to check each tuple for nullness when the dump restores the
primary key creation.
pg_upgrading from an older release requires a somewhat brittle procedure
to create a constraint state that matches what would be created if the
database were being created fresh in Postgres 17. I have tested all the
scenarios I could think of, and it works correctly as far as I can tell,
but I could have neglected weird cases.
This patch has been very long in the making. The first patch was
written by Bernd Helmle in 2010 to add a new pg_constraint.contype value
('n'), which I (Álvaro) then hijacked in 2011 and 2012, until that one
was killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again. During Postgres 16 this had
already been introduced by commit e056c557aef4, but there were some
problems mainly with the pg_upgrade procedure that couldn't be fixed in
reasonable time, so it was reverted.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring an additional pg_attribute column
to track the OID of the not-null constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Commit 2a8b40e36 introduces the worker type field for logical replication
workers, but forgot to reset the type when the worker exits. This can lead
to recognizing a stopped worker as a valid logical replication worker.
Fix it by resetting the worker type and additionally adding the safeguard
to not use LogicalRepWorker until ->in_use is verified.
Reported-by: Thomas Munro based on cfbot reports.
Author: Hou Zhijie, Alvaro Herrera
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/CA+hUKGK2RQh4LifVgBmkHsCYChP-65UwGXOmnCzYVa5aAt4GWg@mail.gmail.com
Revalidation of a plancache entry (after a cache invalidation event)
requires acquiring a snapshot. Normally that is harmless, but not
if the cached statement is one that needs to run without acquiring a
snapshot. We were already aware of that for TransactionStmts,
but for some reason hadn't extrapolated to the other statements that
PlannedStmtRequiresSnapshot() knows mustn't set a snapshot. This can
lead to unexpected failures of commands such as SET TRANSACTION
ISOLATION LEVEL. We can fix it in the same way, by excluding those
command types from revalidation.
However, we can do even better than that: there is no need to
revalidate for any statement type for which parse analysis, rewrite,
and plan steps do nothing interesting, which is nearly all utility
commands. To mechanize this, invent a parser function
stmt_requires_parse_analysis() that tells whether parse analysis does
anything beyond wrapping a CMD_UTILITY Query around the raw parse
tree. If that's what it does, then rewrite and plan will just
skip the Query, so that it is not possible for the same raw parse
tree to produce a different plan tree after cache invalidation.
stmt_requires_parse_analysis() is basically equivalent to the
existing function analyze_requires_snapshot(), except that for
obscure reasons that function omits ReturnStmt and CallStmt.
It is unclear whether those were oversights or intentional.
I have not been able to demonstrate a bug from not acquiring a
snapshot while analyzing these commands, but at best it seems mighty
fragile. It seems safer to acquire a snapshot for parse analysis of
these commands too, which allows making stmt_requires_parse_analysis
and analyze_requires_snapshot equivalent.
In passing this fixes a second bug, which is that ResetPlanCache
would exclude ReturnStmts and CallStmts from revalidation.
That's surely *not* safe, since they contain parsable expressions.
Per bug #18059 from Pavel Kulakov. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18059-79c692f036b25346@postgresql.org
It's good hygiene if e.g. an extension launches a subprogram when
being loaded. We went through some effort to close them in the child
process in EXEC_BACKEND mode, but it's better to not hand them down to
the child process in the first place. We still need to close them
after fork when !EXEC_BACKEND, but it's a little simpler.
In the passing, LOG a message if closing the client connection or
listen socket fails. Shouldn't happen, but if it does, would be nice
to know.
Reviewed-by: Tristan Partin, Andres Freund, Thomas Munro
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
The SnapBuildRestoreContents() used a const value in the error message to
indicate the size in bytes it was expecting to read from the serialized
snapshot file. Fix it by reporting the size that was actually passed.
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Backpatch-through: 16
Discussion: http://postgr.es/m/OS0PR01MB5716D408364F7DF32221C08D941FA@OS0PR01MB5716.jpnprd01.prod.outlook.com
_bt_allequalimage() does complicated things, so it's not OK to call it
in a critical section. Per buildfarm failure on 'prion', which uses
-DRELCACHE_FORCE_RELEASE -DCATCACHE_FORCE_RELEASE options.
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9@iki.fi
Backpatch-through: 16, like commit ccadf73163 that introduced this
