the four functions.
> Also, please justify the temp-related changes. I was not aware that we
> had any breakage there.
patch-tmp-schema.txt contains the following bits:
*) Changes pg_namespace_aclmask() so that the superuser is always able
to create objects in the temp namespace.
*) Changes pg_namespace_aclmask() so that if this is a temp namespace,
objects are only allowed to be created in the temp namespace if the
user has TEMP privs on the database. This encompasses all object
creation, not just TEMP tables.
*) InitTempTableNamespace() checks to see if the current user, not the
session user, has access to create a temp namespace.
The first two changes are necessary to support the third change. Now
it's possible to revoke all temp table privs from non-super users and
limiting all creation of temp tables/schemas via a function that's
executed with elevated privs (security definer). Before this change,
it was not possible to have a setuid function to create a temp
table/schema if the session user had no TEMP privs.
patch-area-path.txt contains:
*) Can now determine the area of a closed path.
patch-dfmgr.txt contains:
*) Small tweak to add the library path that's being expanded.
I was using $lib/foo.so and couldn't easily figure out what the error
message, "invalid macro name in dynamic library path" meant without
looking through the source code. With the path in there, at least I
know where to start looking in my config file.
Sean Chittenden
was modified for IPv6. Use a robust definition of struct sockaddr_storage,
do a proper configure test to see if ss_len exists, don't assume that
getnameinfo() will handle AF_UNIX sockets, don't trust getaddrinfo to
return the protocol we ask for, etc. This incorporates several outstanding
patches from Kurt Roeckx, but I'm to blame for anything that doesn't
work ...
protocol 3, then falls back to 2 if postmaster rejects the startup packet
with an old-format error message. A side benefit of the rewrite is that
SSL-encrypted connections can now be made without blocking. (I think,
anyway, but do not have a good way to test.)
leave it for the kernel to do after the process dies. This allows clients
to wait for the backend to exit if they wish (after sending X message,
wait till EOF is detected on the socket).
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
of the socket file and socket lock file; this should prevent both of them
from being removed by even the stupidest varieties of /tmp-cleaning
script. Per suggestion from Giles Lean.
postgresql version 7.3, but yea... this patch adds full IPv6
support to postgres. I've tested it out on 7.2.3 and has
been running perfectly stable.
CREDITS:
The KAME Project (Initial patch)
Nigel Kukard <nkukard@lbsd.net>
Johan Jordaan <johanj@lando.co.za>
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
when to send what to which, prevent recursion by introducing new COMMERROR
elog level for client-communication problems, get rid of direct writes
to stderr in backend/libpq files, prevent non-error elogs from going to
client during the authentication cycle.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
to use and significantly faster. This tweak saves 25% (!) of the runtime
of COPY IN in a test with 8000-character lines. I wouldn't normally
commit a performance improvement this late in the cycle, but 25% got
my attention...
