Previously, convert_one_string_to_scalar() would examine up to 20 bytes of
the input string, producing a scalar conversion with theoretical precision
far greater than is of any possible use considering the other limitations
on the accuracy of the resulting selectivity estimate. (I think this
choice might pre-date the caller-level logic that strips any common prefix
of the strings; before that, there could have been value in scanning the
strings far enough to use all the precision available in a double.)
Aside from wasting cycles to little purpose, this choice meant that the
"denom" variable could grow to as much as 256^21 = 3.74e50, which could
overflow in some non-IEEE float arithmetics. While we don't really support
any machines with non-IEEE arithmetic anymore, this still seems like quite
an unnecessary platform dependency. Limit the scan to 12 bytes instead,
thus limiting "denom" to 256^13 = 2.03e31, a value more likely to be
computable everywhere.
Per testing by Greg Stark, which showed overflow failures in our standard
regression tests on VAX.
If we have the typmod that identifies a registered record type, there's no
reason that record_in() should refuse to perform input conversion for it.
Now, in direct SQL usage, record_in() will always be passed typmod = -1
with type OID RECORDOID, because no typmodin exists for type RECORD, so the
case can't arise. However, some InputFunctionCall users such as PLs may be
able to supply the right typmod, so we should allow this to support them.
Note: the previous coding and comment here predate commit 59c016aa9f490b53.
There has been no case since 8.1 in which the passed type OID wouldn't be
valid; and if it weren't, this error message wouldn't be apropos anyway.
Better to let lookup_rowtype_tupdesc complain about it.
Back-patch to 9.1, as this is necessary for my upcoming plpython fix.
I'm committing it separately just to make it a bit more visible in the
commit history.
So far we have worked around the fact that some very old compilers do
not support 'inline' functions by only using inline functions
conditionally (or not at all). Since such compilers are very rare by
now, we have decided to rely on inline functions from 9.6 onwards.
To avoid breaking these old compilers inline is defined away when not
supported. That'll cause "function x defined but not used" type of
warnings, but since nobody develops on such compilers anymore that's
ok.
This change in policy will allow us to more easily employ inline
functions.
I chose to remove code previously conditional on PG_USE_INLINE as it
seemed confusing to have code dependent on a define that's always
defined.
Blacklisting of compilers, like in c53f73879f, now has to be done
differently. A platform template can define PG_FORCE_DISABLE_INLINE to
force inline to be defined empty.
Discussion: 20150701161447.GB30708@awork2.anarazel.de
It's against project policy to use elog() for user-facing errors, or to
omit an errcode() selection for errors that aren't supposed to be "can't
happen" cases. Fix all the violations of this policy that result in
ERRCODE_INTERNAL_ERROR log entries during the standard regression tests,
as errors that can reliably be triggered from SQL surely should be
considered user-facing.
I also looked through all the files touched by this commit and fixed
other nearby problems of the same ilk. I do not claim to have fixed
all violations of the policy, just the ones in these files.
In a few places I also changed existing ERRCODE choices that didn't
seem particularly appropriate; mainly replacing ERRCODE_SYNTAX_ERROR
by something more specific.
Back-patch to 9.5, but no further; changing ERRCODE assignments in
stable branches doesn't seem like a good idea.
As in commit 0a52d378b03b7d5a, avoid doing something that has undefined
results according to the C standard, even though in practice there does
not seem to be any problem with it.
This fixes two places in numeric.c that demonstrably could call memcpy()
with such arguments. I looked through that file and didn't see any other
places with similar hazards; this is not to claim that there are not such
places in other files.
Per report from Piotr Stefaniak. Back-patch to 9.5 which is where the
previous commit was added. We're more or less setting a precedent that
we will not worry about this type of issue in pre-9.5 branches unless
someone demonstrates a problem in the field.
Although I think on all modern machines floating division by zero
results in Infinity not SIGFPE, we still don't want infinities
running around in the planner's costing estimates; too much risk
of that leading to insane behavior.
grouping_planner() failed to consider the possibility that final_rel
might be known dummy and hence have zero rowcount. (I wonder if it
would be better to set a rows estimate of 1 for dummy relations?
But at least in the back branches, changing this convention seems
like a bad idea, so I'll leave that for another day.)
Make certain that get_variable_numdistinct() produces a nonzero result.
The case that can be shown to be broken is with stadistinct < 0.0 and
small ntuples; we did not prevent the result from rounding to zero.
For good luck I applied clamp_row_est() to all the nonconstant return
values.
In ExecChooseHashTableSize(), Assert that we compute positive nbuckets
and nbatch. I know of no reason to think this isn't the case, but it
seems like a good safety check.
Per reports from Piotr Stefaniak. Back-patch to all active branches.
The previous code resulted in memory access beyond the path bounds. The
cure is to move it into a code branch that checks the value of lex_level
is within the correct bounds.
Bug reported and diagnosed by Piotr Stefaniak.
The pg_stats view is supposed to be restricted to only show rows
about tables the user can read. However, it sometimes can leak
information which could not otherwise be seen when row level security
is enabled. Fix that by not showing pg_stats rows to users that would
be subject to RLS on the table the row is related to. This is done
by creating/using the newly introduced SQL visible function,
row_security_active().
Along the way, clean up three call sites of check_enable_rls(). The second
argument of that function should only be specified as other than
InvalidOid when we are checking as a different user than the current one,
as in when querying through a view. These sites were passing GetUserId()
instead of InvalidOid, which can cause the function to return incorrect
results if the current user has the BYPASSRLS privilege and row_security
has been set to OFF.
Additionally fix a bug causing RI Trigger error messages to unintentionally
leak information when RLS is enabled, and other minor cleanup and
improvements. Also add WITH (security_barrier) to the definition of pg_stats.
Bumped CATVERSION due to new SQL functions and pg_stats view definition.
Back-patch to 9.5 where RLS was introduced. Reported by Yaroslav.
Patch by Joe Conway and Dean Rasheed with review and input by
Michael Paquier and Stephen Frost.
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
The wrong is_null flag was being passed to datum_to_json. Also, null
object key values are not permitted, and this was not being checked
for. Add regression tests covering these cases, and also add those tests
to the json set, even though it was doing the right thing.
Fixes bug #13514, initially diagnosed by Tom Lane.
Previously, there was an inconsistency across json/jsonb operators that
operate on datums containing JSON arrays -- only some operators
supported negative array count-from-the-end subscripting. Specifically,
only a new-to-9.5 jsonb deletion operator had support (the new "jsonb -
integer" operator). This inconsistency seemed likely to be
counter-intuitive to users. To fix, allow all places where the user can
supply an integer subscript to accept a negative subscript value,
including path-orientated operators and functions, as well as other
extraction operators. This will need to be called out as an
incompatibility in the 9.5 release notes, since it's possible that users
are relying on certain established extraction operators changed here
yielding NULL in the event of a negative subscript.
For the json type, this requires adding a way of cheaply getting the
total JSON array element count ahead of time when parsing arrays with a
negative subscript involved, necessitating an ad-hoc lex and parse.
This is followed by a "conversion" from a negative subscript to its
equivalent positive-wise value using the count. From there on, it's as
if a positive-wise value was originally provided.
Note that there is still a minor inconsistency here across jsonb
deletion operators. Unlike the aforementioned new "-" deletion operator
that accepts an integer on its right hand side, the new "#-" path
orientated deletion variant does not throw an error when it appears like
an array subscript (input that could be recognized by as an integer
literal) is being used on an object, which is wrong-headed. The reason
for not being stricter is that it could be the case that an object pair
happens to have a key value that looks like an integer; in general,
these two possibilities are impossible to differentiate with rhs path
text[] argument elements. However, we still don't allow the "#-"
path-orientated deletion operator to perform array-style subscripting.
Rather, we just return the original left operand value in the event of a
negative subscript (which seems analogous to how the established
"jsonb/json #> text[]" path-orientated operator may yield NULL in the
event of an invalid subscript).
In passing, make SetArrayPath() stricter about not accepting cases where
there is trailing non-numeric garbage bytes rather than a clean NUL
byte. This means, for example, that strings like "10e10" are now not
accepted as an array subscript of 10 by some new-to-9.5 path-orientated
jsonb operators (e.g. the new #- operator). Finally, remove dead code
for jsonb subscript deletion; arguably, this should have been done in
commit b81c7b409.
Peter Geoghegan and Andrew Dunstan
This formalizes a decision implicit in commit
4ea51cdfe85ceef8afabceb03c446574daa0ac23 and adds clean detection of
affected systems. Vendor updates are available for each such known bug.
Back-patch to 9.5, where the aforementioned commit first appeared.
Patch by David Rowley. Backpatch to 9.5, as some of the calls were new in
9.5, and keeping the code in sync with master makes future backpatching
easier.
This makes it possible to use the functions without getting errors, if there
is a chance that the file might be removed or renamed concurrently.
pg_rewind needs to do just that, although this could be useful for other
purposes too. (The changes to pg_rewind to use these functions will come in
a separate commit.)
The read_binary_file() function isn't very well-suited for extensions.c's
purposes anymore, if it ever was. So bite the bullet and make a copy of it
in extension.c, tailored for that use case. This seems better than the
accidental code reuse, even if it's a some more lines of code.
Michael Paquier, with plenty of kibitzing by me.
A few places assumed they could pass NULL for the argtypes array when
looking up functions known to have zero arguments. At first glance
it seems that this should be safe enough, since memcmp() is surely not
allowed to fetch any bytes if its count argument is zero. However,
close reading of the C standard says that such calls have undefined
behavior, so we'd probably best avoid it.
Since the number of places doing this is quite small, and some other
places looking up zero-argument functions were already passing dummy
arrays, let's standardize on the latter solution rather than hacking
the function lookup code to avoid calling memcmp() in these cases.
I also added Asserts to catch any future violations of the new rule.
Given the utter lack of any evidence that this actually causes any
problems in the field, I don't feel a need to back-patch this change.
Per report from Piotr Stefaniak, though this is not his patch.
POSIX permits setlocale() calls to invalidate any previous setlocale()
return values, but commit 5f538ad004aa00cf0881f179f0cde789aad4f47e
neglected to account for setlocale(LC_CTYPE, NULL) doing so. The effect
was to set the LC_CTYPE environment variable to an unintended value.
pg_perm_setlocale() sets this variable to assist PL/Perl; without it,
Perl would undo PostgreSQL's locale settings. The known-affected
configurations are 32-bit, release builds using Visual Studio 2012 or
Visual Studio 2013. Visual Studio 2010 is unaffected, as were all
buildfarm-attested configurations. In principle, this bug could leave
the wrong LC_CTYPE in effect after PL/Perl use, which could in turn
facilitate problems like corrupt tsvector datums. No known platform
experiences that consequence, because PL/Perl on Windows does not use
this environment variable.
The bug has been user-visible, as early postmaster failure, on systems
with Windows ANSI code page set to CP936 for "Chinese (Simplified, PRC)"
and probably on systems using other multibyte code pages.
(SetEnvironmentVariable() rejects values containing character data not
valid under the Windows ANSI code page.) Back-patch to 9.4, where the
faulty commit first appeared.
Reported by Didi Hu and 林鹏程. Reviewed by Tom Lane, though this fix
strategy was not his first choice.
POSIX permits setlocale() calls to invalidate any previous setlocale()
return values. Commit 5f538ad004aa00cf0881f179f0cde789aad4f47e
neglected to account for that. In advance of fixing that bug, switch to
failing hard on affected configurations. This is a planned temporary
commit to assay buildfarm-represented configurations.
jsonb_set() and other clients of the setPathArray() utility function
could get spurious results when an array integer subscript is provided
that is not within the range of int.
To fix, ensure that the value returned by strtol() within setPathArray()
is within the range of int; when it isn't, assume an invalid input in
line with existing, similar cases. The path-orientated operators that
appeared in PostgreSQL 9.3 and 9.4 do not call setPathArray(), and
already independently take this precaution, so no change there.
Peter Geoghegan
Supporting deletion of JSON pairs within jsonb objects using an
array-style integer subscript allowed for surprising outcomes. This was
mostly due to the implementation-defined ordering of pairs within
objects for jsonb.
It also seems desirable to make jsonb integer subscript deletion
consistent with the 9.4 era general purpose integer subscripting
operator for jsonb (although that operator returns NULL when an object
is encountered, while we prefer here to throw an error).
Peter Geoghegan, following discussion on -hackers.
The function is given a fourth parameter, which defaults to true. When
this parameter is true, if the last element of the path is missing
in the original json, jsonb_set creates it in the result and assigns it
the new value. If it is false then the function does nothing unless all
elements of the path are present, including the last.
Based on some original code from Dmitry Dolgov, heavily modified by me.
Catalog version bumped.
Ensure that we null-terminate the result string (one place in pg_rewind).
Be paranoid about out-of-range results from readlink() (should not happen,
but there is no good reason for some call sites to be careful about it and
others not). Consistently use the whole buffer, not sometimes one byte
less. Ensure we emit an appropriate errcode() in all cases. Spell the
error messages the same way.
The only serious bug here is the missing null-termination in pg_rewind,
which is new code, so no need for a back-patch.
Abhijit Menon-Sen and Tom Lane
Seems to have been an oversight in the original leakproofness patch.
Per report and patch from Jeevan Chalke.
In passing, prettify some awkward leakproof-related code in AlterFunction.
This reverts commit 54547bd87f49326d67051254c363e6597d16ffda.
This appears to have been a thinko on my part. I will try to come up
wioth a better solution.
Commit 9b74f32cdbff8b9be47fc69164eae552050509ff did this for objects of
type jbvBinary, but in trying further to simplify some of the new jsonb
code I discovered that objects of type jbvObject or jbvArray passed as
WJB_ELEM or WJB_VALUE also caused problems. These too are now added
component by component.
Backpatch to 9.4.
Some of this is made possible by commit
9b74f32cdbff8b9be47fc69164eae552050509ff which lets pushJsonbValue
handle binary Jsonb values, meaning that clients no longer have to, and
some is just doing things in simpler and more straightforward ways.
Fix some places where pgindent did silly stuff, often because project
style wasn't followed to begin with. (I've not touched the atomics
headers, though.)
Silly oversight in commit 1dc5ebc9077ab742079ce5dac9a6664248d42916:
when array2 is an expanded array, it might have array2->xpn.dnulls equal
to NULL, indicating the array is known null-free. The code wasn't
expecting that, because it formerly always used deconstruct_array() which
always delivers a nulls array.
Per bug #13334 from Regina Obe.
pushJsonbValue was accepting jbvBinary objects passed as WJB_ELEM or
WJB_VALUE data. While this succeeded, when those objects were later
encountered in attempting to convert the result to Jsonb, errors
occurred. With this change we ghuarantee that a JSonbValue constructed
from calls to pushJsonbValue does not contain any jbvBinary objects.
This cures a problem observed with jsonb_delete.
This means callers of pushJsonbValue no longer need to perform this
unpacking themselves. A subsequent patch will perform some cleanup in
that area.
The error was not triggered by any 9.4 code, but this is a publicly
visible routine, and so the error could be exercised by third party
code, therefore backpatch to 9.4.
Bug report from Peter Geoghegan, fix by me.
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
Neither the deparsing of the new alias for INSERT's target table, nor of
the inference clause was supported. Also fixup a typo in an error
message.
Add regression tests to test those code paths.
Author: Peter Geoghegan
PostgreSQL already checked the vast majority of these, missing this
handful that nearly cannot fail. If putenv() failed with ENOMEM in
pg_GSS_recvauth(), authentication would proceed with the wrong keytab
file. If strftime() returned zero in cache_locale_time(), using the
unspecified buffer contents could lead to information exposure or a
crash. Back-patch to 9.0 (all supported versions).
Other unchecked calls to these functions, especially those in frontend
code, pose negligible security concern. This patch does not address
them. Nonetheless, it is always better to check return values whose
specification provides for indicating an error.
In passing, fix an off-by-one error in strftime_win32()'s invocation of
WideCharToMultiByte(). Upon retrieving a value of exactly MAX_L10N_DATA
bytes, strftime_win32() would overrun the caller's buffer by one byte.
MAX_L10N_DATA is chosen to exceed the length of every possible value, so
the vulnerable scenario probably does not arise.
Security: CVE-2015-3166
This SQL standard functionality allows to aggregate data by different
GROUP BY clauses at once. Each grouping set returns rows with columns
grouped by in other sets set to NULL.
This could previously be achieved by doing each grouping as a separate
query, conjoined by UNION ALLs. Besides being considerably more concise,
grouping sets will in many cases be faster, requiring only one scan over
the underlying data.
The current implementation of grouping sets only supports using sorting
for input. Individual sets that share a sort order are computed in one
pass. If there are sets that don't share a sort order, additional sort &
aggregation steps are performed. These additional passes are sourced by
the previous sort step; thus avoiding repeated scans of the source data.
The code is structured in a way that adding support for purely using
hash aggregation or a mix of hashing and sorting is possible. Sorting
was chosen to be supported first, as it is the most generic method of
implementation.
Instead of, as in an earlier versions of the patch, representing the
chain of sort and aggregation steps as full blown planner and executor
nodes, all but the first sort are performed inside the aggregation node
itself. This avoids the need to do some unusual gymnastics to handle
having to return aggregated and non-aggregated tuples from underlying
nodes, as well as having to shut down underlying nodes early to limit
memory usage. The optimizer still builds Sort/Agg node to describe each
phase, but they're not part of the plan tree, but instead additional
data for the aggregation node. They're a convenient and preexisting way
to describe aggregation and sorting. The first (and possibly only) sort
step is still performed as a separate execution step. That retains
similarity with existing group by plans, makes rescans fairly simple,
avoids very deep plans (leading to slow explains) and easily allows to
avoid the sorting step if the underlying data is sorted by other means.
A somewhat ugly side of this patch is having to deal with a grammar
ambiguity between the new CUBE keyword and the cube extension/functions
named cube (and rollup). To avoid breaking existing deployments of the
cube extension it has not been renamed, neither has cube been made a
reserved keyword. Instead precedence hacking is used to make GROUP BY
cube(..) refer to the CUBE grouping sets feature, and not the function
cube(). To actually group by a function cube(), unlikely as that might
be, the function name has to be quoted.
Needs a catversion bump because stored rules may change.
Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund
Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas
Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule
Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com
This lets BRIN be used with R-Tree-like indexing strategies.
Also provided are operator classes for range types, box and inet/cidr.
The infrastructure provided here should be sufficient to create operator
classes for similar datatypes; for instance, opclasses for PostGIS
geometries should be doable, though we didn't try to implement one.
(A box/point opclass was also submitted, but we ripped it out before
commit because the handling of floating point comparisons in existing
code is inconsistent and would generate corrupt indexes.)
Author: Emre Hasegeli. Cosmetic changes by me
Review: Andreas Karlsson
For upcoming BRIN opclasses, it's convenient to have strategy numbers
defined in a single place. Since there's nothing appropriate, create
it. The StrategyNumber typedef now lives there, as well as existing
strategy numbers for B-trees (from skey.h) and R-tree-and-friends (from
gist.h). skey.h is forced to include stratnum.h because of the
StrategyNumber typedef, but gist.h is not; extensions that currently
rely on gist.h for rtree strategy numbers might need to add a new
A few .c files can stop including skey.h and/or gist.h, which is a nice
side benefit.
Per discussion:
https://www.postgresql.org/message-id/20150514232132.GZ2523@alvh.no-ip.org
Authored by Emre Hasegeli and Álvaro.
(It's not clear to me why bootscanner.l has any #include lines at all.)
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
The distance function can now set *recheck = false, like index quals. The
executor will then re-check the ORDER BY expressions, and use a queue to
reorder the results on the fly.
This makes it possible to do kNN-searches on polygons and circles, which
don't store the exact value in the index, but just a bounding box.
Alexander Korotkov and me
This patch introduces the ability for complex datatypes to have an
in-memory representation that is different from their on-disk format.
On-disk formats are typically optimized for minimal size, and in any case
they can't contain pointers, so they are often not well-suited for
computation. Now a datatype can invent an "expanded" in-memory format
that is better suited for its operations, and then pass that around among
the C functions that operate on the datatype. There are also provisions
(rudimentary as yet) to allow an expanded object to be modified in-place
under suitable conditions, so that operations like assignment to an element
of an array need not involve copying the entire array.
The initial application for this feature is arrays, but it is not hard
to foresee using it for other container types like JSON, XML and hstore.
I have hopes that it will be useful to PostGIS as well.
In this initial implementation, a few heuristics have been hard-wired
into plpgsql to improve performance for arrays that are stored in
plpgsql variables. We would like to generalize those hacks so that
other datatypes can obtain similar improvements, but figuring out some
appropriate APIs is left as a task for future work. (The heuristics
themselves are probably not optimal yet, either, as they sometimes
force expansion of arrays that would be better left alone.)
Preliminary performance testing shows impressive speed gains for plpgsql
functions that do element-by-element access or update of large arrays.
There are other cases that get a little slower, as a result of added array
format conversions; but we can hope to improve anything that's annoyingly
bad. In any case most applications should see a net win.
Tom Lane, reviewed by Andres Freund
