This code was relying on "long", which is signed 8 bytes everywhere
except on Windows where it is 4 bytes, that could potentially expose it
to overflows, even if the current uses in the code are fine as far as I
know. This code is now able to rely on the same sizeof() variable
everywhere, with int64. long was used for sizes, partition counts and
entry counts.
Some callers of the dynahash.c routines used long declarations, that can
be cleaned up to use int64 instead. There was one shortcut based on
SIZEOF_LONG, that can be removed. long is entirely removed from
dynahash.c and hsearch.h.
Similar work was done in b1e5c9fa9ac4.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aKQYp-bKTRtRauZ6@paquier.xyz
Temporary relations may share the same RelFileNumber with a permanent
relation, or other temporary relations associated with other sessions.
Being able to uniquely identify a temporary relation would require
RelidByRelfilenumber() to know about the proc number of the temporary
relation it wants to identify, something it is not designed for since
its introduction in f01d1ae3a104.
There are currently three callers of RelidByRelfilenumber():
- autoprewarm.
- Logical decoding, reorder buffer.
- pg_filenode_relation(), that attempts to find a relation OID based on
a tablespace OID and a RelFileNumber.
This makes the situation problematic particularly for the first two
cases, leading to the possibility of random ERRORs due to
inconsistencies that temporary relations can create in the cache
maintained by RelidByRelfilenumber(). The third case should be less of
an issue, as I suspect that there are few direct callers of
pg_filenode_relation().
The window where the ERRORs are happen is very narrow, requiring an OID
wraparound to create a lookup conflict in RelidByRelfilenumber() with a
temporary table reusing the same OID as another relation already cached.
The problem is easier to reach in workloads with a high OID consumption
rate, especially with a higher number of temporary relations created.
We could get pg_filenode_relation() and RelidByRelfilenumber() to work
with temporary relations if provided the means to identify them with an
optional proc number given in input, but the years have also shown that
we do not have a use case for it, yet. Note that this could not be
backpatched if pg_filenode_relation() needs changes. It is simpler to
ignore temporary relations.
Reported-by: Shenhao Wang <wangsh.fnst@fujitsu.com>
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-By: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Takamichi Osumi <osumi.takamichi@fujitsu.com>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Shenhao Wang <wangsh.fnst@fujitsu.com>
Discussion: https://postgr.es/m/bbaaf9f9-ebb2-645f-54bb-34d6efc7ac42@fujitsu.com
Backpatch-through: 13
The result of pgaio_io_get_id() was being assigned to a mix of int and
uint32 variables. This fixes it to use int consistently, which seems
the most correct. Also change the queue empty special value in
method_worker.c to -1 from UINT32_MAX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/70c784b3-f60b-4652-b8a6-75e5f051243e%40eisentraut.org
Replication slot synchronization (sync_replication_slots = on)
requires wal_level to be logical. This commit prevents the server
from starting if sync_replication_slots is enabled but wal_level
is set to minimal or replica.
Failing early during startup helps users catch invalid configurations
immediately, which is important because changing wal_level requires
a server restart.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Shveta Malik <shveta.malik@gmail.com>
Discussion: https://postgr.es/m/CAH0PTU_pc3oHi__XESF9ZigCyzai1Mo3LsOdFyQA4aUDkm01RA@mail.gmail.com
This is similar to 19c6e92b13b2, in order to keep the style used in the
scripts consistent for the option names and values used in commands.
The places updated in this commit have been added recently in
71ea0d679543.
These changes are cosmetic; there is no need for a backpatch.
The description of this GUC provides a list of the situations where
full-page writes are generated. However, it is not completely exact,
mentioning only the cases where full_page_writes=on or base backups. It
is possible to generate full-page writes in more situations than these
two, making the description confusing as it implies that no other cases
exist.
The description is slightly reworded to take into account that other
cases are possible, without mentioning them directly to minimize the
maintenance burden should FPWs be generated in more contexts in the
future.
Author: Jingtang Zhang <mrdrivingduck@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAPsk3_CtAYa_fy4p6=x7qtoutrdKvg1kGk46D5fsE=sMt2546g@mail.gmail.com
Backpatch-through: 13
If we error out during execution of a SQL-language function, we will
often leave behind non-null pointers in its SQLFunctionCache's cplan
and eslist fields. This is problematic if the SQLFunctionCache is
re-used, because those pointers will point at resources that were
released during error cleanup. This problem escaped detection so far
because ordinarily we won't re-use an FmgrInfo+SQLFunctionCache struct
after a query error. However, in the rather improbable case that
someone implements an opclass support function in SQL language, there
will be long-lived FmgrInfos for it in the relcache, and then the
problem is reachable after the function throws an error.
To fix, add a flag to SQLFunctionCache that tracks whether execution
escapes out of fmgr_sql, and clear out the relevant fields during
init_sql_fcache if so. (This is going to need more thought if we ever
try to share FMgrInfos across threads; but it's very far from being
the only problem such a project will encounter, since many functions
regard fn_extra as being query-local state.)
This broke at commit 0313c5dc6; before that we did not try to re-use
SQLFunctionCache state across calls. Hence, back-patch to v18.
Bug: #19026
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19026-90aed5e71d0c8af3@postgresql.org
Backpatch-through: 18
In refuseDupeIndexAttach(), change from
errdetail("Another index is already attached for partition \"%s\"."...)
to
errdetail("Another index \"%s\" is already attached for partition \"%s\"."...)
so we can easily understand which index is already attached for
partition \"%s\".
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxGBfykJ_1ztk9T%2BL_gLmkOSOF%2BmL9Mn4ZPydz-rh%3DLccQ%40mail.gmail.com
Some replication slot manipulations (logical decoding via SQL,
advancing) were failing an assertion when releasing a slot in
single-user mode, because active_pid was not set in a ReplicationSlot
when its slot is acquired.
ReplicationSlotAcquire() has some logic to be able to work with the
single-user mode. This commit sets ReplicationSlot->active_pid to
MyProcPid, to let the slot-related logic fall-through, considering the
single process as the one holding the slot.
Some TAP tests are added for various replication slot functions with the
single-user mode, while on it, for slot creation, drop, advancing, copy
and logical decoding with multiple slot types (temporary, physical vs
logical). These tests are skipped on Windows, as direct calls of
postgres --single would fail on permission failures. There is no
platform-specific behavior that needs to be checked, so living with this
restriction should be fine. The CI is OK with that, now let's see what
the buildfarm tells.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Mutaamba Maasha <maasha@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966ED588A0328DAEBE8CB25F5FA2@OSCPR01MB14966.jpnprd01.prod.outlook.com
Backpatch-through: 13
vacuumdb should follow the behavior of the underlying VACUUM and ANALYZE
commands. When --analyze-only is used, it ought to analyze regular tables,
materialized views, and partitioned tables, just as ANALYZE (with no explicit
target tables) does. Otherwise, it should only process regular tables and
materialized views, since VACUUM skips partitioned tables when no targets
are given.
Previously, vacuumdb --analyze-only skipped partitioned tables. This was
inconsistent, and also inconvenient after pg_upgrade, where --analyze-only
is typically used to gather missing statistics.
This commit fixes the behavior so that vacuumdb --analyze-only also processes
partitioned tables. As a result, both vacuumdb --analyze-only and
ANALYZE (with no explicit targets) now analyze regular tables,
partitioned tables, and materialized views, but not foreign tables.
Because this is a nontrivial behavior change, it is applied only to master.
Reported-by: Zechman, Derek S <Derek.S.Zechman@snapon.com>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Co-authored-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CO1PR04MB8281387B9AD9DE30976966BBC045A%40CO1PR04MB8281.namprd04.prod.outlook.com
This comment mentions that pg_buffercache locks all buffer
partitions simultaneously, but it hasn't done so since v10.
Oversight in commit 6e654546fb.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/aKTuAHVEuYCUmmIy%40nathan
This commit adds CHECK_FOR_INTERRUPTS to loops iterating over shared
buffers in several pg_buffercache functions, allowing them to be
interrupted during long-running operations.
Backpatch to all supported versions. Add CHECK_FOR_INTERRUPTS to the
loop in pg_buffercache_pages() in all supported branches, and to
pg_buffercache_summary() and pg_buffercache_usage_counts() in version
16 and newer.
Author: SATYANARAYANA NARLAPURAM <satyanarlapuram@gmail.com>
Discussion: https://postgr.es/m/CAHg+QDcejeLx7WunFT3DX6XKh1KshvGKa8F5au8xVhqVvvQPRw@mail.gmail.com
Backpatch-through: 13
This commit updates the pgoutput documentation with the following changes:
- Specify the data type for each pgoutput option.
- Clarify the relationship between proto_version and options such as
streaming and two_phase.
- Add a note on the use of pg_logical_slot_peek_changes and
pg_logical_slot_get_changes with pgoutput.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFJTbygdhhjR_iP4Oem=Lo1xsptWWOq825uoW+hG_Lfnw@mail.gmail.com
Previously, the documentation for pgoutput was located in the section on
the logical streaming replication protocol, and there was no index entry
for it. As a result, users had difficulty finding information about pgoutput.
This commit moves the pgoutput documentation under the logical decoding
section and adds an index entry, making it easier for users to locate and
access this information.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CAHGQGwFJTbygdhhjR_iP4Oem=Lo1xsptWWOq825uoW+hG_Lfnw@mail.gmail.com
This just includes a link to the bki documentation, to help people get
started.
Before commit 372728b0d49, there was a README at
src/backend/catalog/README, but then this was moved to the SGML
documentation. So this effectively puts back a link to what was
moved. But src/include/catalog/ is probably a better location,
because that's where all the interesting files are.
Co-authored-by: Florents Tselai <florents.tselai@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+v5N400GJFJ9RyXAX7hFKbtF7vVQGvWdFWEfcSQmvVhi9xfrA@mail.gmail.com
The DROP SUBSCRIPTION command performs several operations: it stops the
subscription workers, removes subscription-related entries from system
catalogs, and deletes the replication slot on the publisher server.
Previously, this command acquired an AccessExclusiveLock on
pg_subscription before initiating these steps.
However, while holding this lock, the command attempts to connect to the
publisher to remove the replication slot. In cases where the connection is
made to a newly created database on the same server as subscriber, the
cache-building process during connection tries to acquire an
AccessShareLock on pg_subscription, resulting in a self-deadlock.
To resolve this issue, we reduce the lock level on pg_subscription during
DROP SUBSCRIPTION from AccessExclusiveLock to RowExclusiveLock. Earlier,
the higher lock level was used to prevent the launcher from starting a new
worker during the drop operation, as a restarted worker could become
orphaned.
Now, instead of relying on a strict lock, we acquire an AccessShareLock on
the specific subscription being dropped and re-validate its existence
after acquiring the lock. If the subscription is no longer valid, the
worker exits gracefully. This approach avoids the deadlock while still
ensuring that orphan workers are not created.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/18988-7312c868be2d467f@postgresql.org
This provides a single entry point to access some information about the
state of MultiXacts, able to return some data about multixacts offsets
and counts. Originally this function was only able to return some
information about the number of multixacts and multixact members,
extended here to provide some data about the oldest multixact ID in use
and the oldest offset, if known.
This change has been proposed in a patch that aims at providing more
monitoring capabilities for multixacts, and it is useful on its own.
GetMultiXactInfo() is added to multixact.h, becoming available for
out-of-core code.
Extracted from a larger patch by the same author.
Author: Naga Appani <nagnrik@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA+QeY+AAsYK6WvBW4qYzHz4bahHycDAY_q5ECmHkEV_eB9ckzg@mail.gmail.com
This pointer was not used after its last update. This variable
assignment was most likely a vestige artifact of the earlier versions of
the patch set that have led to 5891c7a8ed8f.
This pointer update is useless, so let's remove it. It removes one call
to pgstat_dsa_init_size(), making the code slightly easier to grasp.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aKLsu2sdpnyeuSSc@ip-10-97-1-34.eu-west-3.compute.internal
Now that the only call to relation_has_unique_index_for() that
supplied an exprlist and oprlist has been removed, the loop handling
those lists is effectively dead code. This patch removes that loop
and simplifies the function accordingly.
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-EBnaRvEs7frTLbsXiweSTUXifsteF-d3rvv01FKO86w@mail.gmail.com
There are two implementation techniques for semijoins: one uses the
JOIN_SEMI jointype, where the executor emits at most one matching row
per left-hand side (LHS) row; the other unique-ifies the right-hand
side (RHS) and then performs a plain inner join.
The latter technique currently has some drawbacks related to the
unique-ification step.
* Only the cheapest-total path of the RHS is considered during
unique-ification. This may cause us to miss some optimization
opportunities; for example, a path with a better sort order might be
overlooked simply because it is not the cheapest in total cost. Such
a path could help avoid a sort at a higher level, potentially
resulting in a cheaper overall plan.
* We currently rely on heuristics to choose between hash-based and
sort-based unique-ification. A better approach would be to generate
paths for both methods and allow add_path() to decide which one is
preferable, consistent with how path selection is handled elsewhere in
the planner.
* In the sort-based implementation, we currently pay no attention to
the pathkeys of the input subpath or the resulting output. This can
result in redundant sort nodes being added to the final plan.
This patch improves semijoin planning by creating a new RelOptInfo for
the RHS rel to represent its unique-ified version. It then generates
multiple paths that represent elimination of distinct rows from the
RHS, considering both a hash-based implementation using the cheapest
total path of the original RHS rel, and sort-based implementations
that either exploit presorted input paths or explicitly sort the
cheapest total path. All resulting paths compete in add_path(), and
those deemed worthy of consideration are added to the new RelOptInfo.
Finally, the unique-ified rel is joined with the other side of the
semijoin using a plain inner join.
As a side effect, most of the code related to the JOIN_UNIQUE_OUTER
and JOIN_UNIQUE_INNER jointypes -- used to indicate that the LHS or
RHS path should be made unique -- has been removed. Besides, the
T_Unique path now has the same meaning for both semijoins and upper
DISTINCT clauses: it represents adjacent-duplicate removal on
presorted input. This patch unifies their handling by sharing the
same data structures and functions.
This patch also removes the UNIQUE_PATH_NOOP related code along the
way, as it is dead code -- if the RHS rel is provably unique, the
semijoin should have already been simplified to a plain inner join by
analyzejoins.c.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-EBnaRvEs7frTLbsXiweSTUXifsteF-d3rvv01FKO86w@mail.gmail.com
This test was the only one named following the convention used for
alternate output files. This was a little bit confusing when looking at
the diffs of the test, because one would think that the diffs are based
on an uncommon case, as alternate outputs are usually used for uncommon
configuration scenarios.
create_sequence_1 was the only test in the tree using such a name, and
it had no alternate output.
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/aKLY6wCa_OInr3kY@paquier.xyz
Two header declarations were related to SQL-callable functions, that
should have been cleaned up in df9133fa6384. Some more includes can be
removed on closer inspection, so let's clean up these as well, while on
it.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/345438.1755524834@sss.pgh.pa.us
This existed in a semi broken stated from be0a66666 until 296cba276.
Recent discussion has questioned the value of having this at all as it
only outputs static information from various of the hash table's
properties when the hash table is created.
Author: Hayato Kuroda (Fujitsu) <kuroda.hayato@fujitsu.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/OSCPR01MB1496650D03FA0293AB9C21416F534A@OSCPR01MB14966.jpnprd01.prod.outlook.com
Previously this was being output to stderr. This commit adjusts things
to use elog(DEBUG4). Here we also adjust the format of the message to
add the hash table name and also put the message on a single line. This
should make grepping the logs for this information easier.
Also get rid of the global hash table statistics. This seems very dated
and didn't fit very well with trying to put all the statistics for a
specific hash table on a single log line.
The main aim here is to allow it so we can have at least one buildfarm
member build with HASH_STATISTICS to help prevent future changes from
breaking things in that area. ca3891251 recently fixed some issues
here.
In passing, switch to using uint64 data types rather than longs for the
usage counters. The long type is 32 bits on some platforms we support.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAApHDvoccvJ9CG5zx+i-EyCzJbcL5K=CzqrnL_YN59qaL5hiaw@mail.gmail.com
Apparently the only Test::More function this script uses is
BAIL_OUT, so this omission just results in the wrong error
output appearing in the cases where it bails out.
Seems to have been an oversight in commit 9f899562d which
split Kerberos.pm out of another script.
Author: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACG=ezY1Dp-S94b78nN0ZuaBGGcMUB6_nF-VyYUwPt1ArFqmGA@mail.gmail.com
Backpatch-through: 17
Input with zero length can result in a buffer underflow when
accessing *(num + (len - 1)), as (len - 1) would produce a negative
index. Add an assertion for zero-length input to prevent it.
This was found by ALT Linux Team.
Reviewing the call sites shows that get_th() currently cannot be
applied to an empty string: it is always called on a string containing
a number we've just printed. Therefore, an assertion rather than a
user-facing error message is sufficient.
Co-authored-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Discussion: https://www.postgresql.org/message-id/flat/e22df993-cdb4-4d0a-b629-42211ebed582@altlinux.org
A patch is under discussion to add more SQL capabilities related to
multixacts, and this move avoids bloating the file more than necessary.
This affects pg_get_multixact_members(). A side effect of this move is
the requirement to add mxstatus_to_string() to multixact.h.
Extracted from a larger patch by the same author, tweaked by me.
Author: Naga Appani <nagnrik@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/CA+QeY+AAsYK6WvBW4qYzHz4bahHycDAY_q5ECmHkEV_eB9ckzg@mail.gmail.com
Move the test for compiler options for C99 earlier in meson.build,
before we make use of the compiler for other tests. That way, if any
command-line options are needed, subsequent tests will also use them.
This is at the moment a theoretical problem, but it seems better to
get this correct. It also matches the order in the Autoconf-based
build more closely.
Discussion: https://www.postgresql.org/message-id/flat/01a69441-af54-4822-891b-ca28e05b215a@eisentraut.org
init_params() sets up "last_value" and "is_called" for a sequence
relation holdind its metadata, based on the sequence properties in
pg_sequences. "log_cnt" is the third property that can be updated in
this routine for FormData_pg_sequence_data, tracking when WAL records
should be generated for a sequence after nextval() iterations. This
routine is called when creating or altering a sequence.
This commit refactors init_params() to not depend anymore on
FormData_pg_sequence_data, removing traces of it in sequence.c, making
easier the manipulation of metadata related to sequences. The knowledge
about "log_cnt" is replaced with a more general "reset_state" flag, to
let the caller know if the sequence state should be reset. In the case
of in-core sequences, this relates to WAL logging. We still need to
depend on FormData_pg_sequence.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/ZWlohtKAs0uVVpZ3@paquier.xyz
This test was failing because MD5 computations are not supported in
these environments. This switches the test to rely on sha256() instead,
providing the same coverage while avoiding the failure.
Oversight in f57e214d1cbb. Per buildfarm members gecko, molamola,
shikra and froghopper.
Discussion: https://postgr.es/m/aKJijS2ZRfRZiYb0@paquier.xyz
Commit c5b7ba4e6 changed things so that the ri_RootResultRelInfo field
of this struct is set for both partitions and inheritance children and
used for tuple routing and transition capture (before that commit, it
was only set for partitions to route tuples into), but failed to update
these comments.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14NF5CcdCmTZpxrvpvBiT0y4EqKikW1r_wAu1CEHeOmUA%40mail.gmail.com
Backpatch-through: 14
This test exercises the corner case in toast_save_datum() where CLUSTER
operations encounter duplicated TOAST references, reusing the existing
TOAST data instead of creating redundant copies.
During table rewrites like CLUSTER, both live and recently-dead versions
of a row may reference the same TOAST value. When copying the second or
later version of such a row, the system checks if a TOAST value already
exists in the new TOAST table using toastrel_valueid_exists(). If
found, toast_save_datum() sets data_todo = 0 so as redundant data is not
stored, ensuring only one copy of the TOAST value exists in the new
table.
The test relies on a combination of UPDATE, CLUSTER, and checks of the
TOAST values used before and after the relation rewrite, to make sure
that the same values are reused across the rewrite.
This is a continuation of 69f75d671475 to make sure that this corner
case keeps working should we mess with this area of the code.
Author: Nikhil Kumar Veldanda <veldanda.nikhilkumar17@gmail.com>
Discussion: https://postgr.es/m/CAFAfj_E+kw5P713S8_jZyVgQAGVFfzFiTUJPrgo-TTtJJoazQw@mail.gmail.com
When extracting a timestamp from a UUIDv7, a conversion from
milliseconds to microseconds was using the incorrect constant
NS_PER_US instead of US_PER_MS. Although both constants have the same
value, this fix improves code clarity by using the semantically
correct constant.
Backpatch to v18, where UUIDv7 was introduced.
Author: Erik Nordström <erik@tigerdata.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CACAa4V+i07eaP6h4MHNydZeX47kkLPwAg0sqe67R=M5tLdxNuQ@mail.gmail.com
Backpatch-through: 18
Recent changes to src/tools/ci/README triggered warnings like
src/tools/ci/README:88: leftover conflict marker
Raise conflict-marker-size in .gitattributes to avoid these.
Add TAP tests that tests the LDAP Lookup of Connection Parameters
functionality in libpq. Prior to this commit, LDAP test coverage only
existed for the server-side authentication functionality and for
connection service file with parameters directly specified in the
file. The tests included here test a pg_service.conf that contains a
link to an LDAP system that contains all of the connection parameters.
Author: Andrew Jackson <andrewjackson947@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAKK5BkHixcivSCA9pfd_eUp7wkLRhvQ6OtGLAYrWC%3Dk7E76LDQ%40mail.gmail.com
bms_prev_member() could attempt to access memory outside of the words[]
array in cases where the prevbit was a number < -1 or > a->nwords *
BITS_PER_BITMAPWORD + 1.
Here we add the Asserts to help draw attention to bogus callers so we're
more likely to catch them during development.
In passing, fix wording of bms_prev_member's header comment which talks
about how we expect the callers to ensure only valid prevbit values are
used.
Author: Greg Burd <greg@burd.me>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2000A717-1FFE-4031-827B-9330FB2E9065%40getmailspring.com
The SQL test added in this commit check a specific code path that had no
coverage until now. When a TOAST datum is rewritten, toast_save_datum()
has a dedicated path to make sure that a new value is allocated if it
does not exist on the TOAST table yet.
This test uses a trick with PLAIN and EXTERNAL storage, with a tuple
large enough to be toasted and small enough to fit on a page. It is
initially stored in plain more, and the rewrite forces the tuple to be
stored externally. The key point is that there is no value allocated
during the initial insert, and that there is one after the rewrite. A
second pattern checked is the reuse of the same value across rewrites,
using \gset.
A set of patches under discussion is messing up with this area of the
code, so this makes sure that such rewrite cases remain consistent
across the board.
Author: Nikhil Kumar Veldanda <veldanda.nikhilkumar17@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAFAfj_E+kw5P713S8_jZyVgQAGVFfzFiTUJPrgo-TTtJJoazQw@mail.gmail.com
Handle 'ci-os-only' occurrences in the .cirrus.star file instead of
.cirrus.tasks.yml file. Now, 'ci-os-only' occurrences are controlled
from one central place instead of dealing with them in each task.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/20240413021221.hg53rvqlvldqh57i%40awork3.anarazel.de
Backpatch: 15-, where CI support was added
We do not want to trigger some tasks by default, to avoid using too many
compute credits. These tasks have to be manually triggered to be run. But
e.g. for cfbot we do have sufficient resources, so we always want to start
those tasks.
With this commit, an individual repository can be configured to trigger
them automatically using an environment variable defined under
"Repository Settings", for example:
REPO_CI_AUTOMATIC_TRIGGER_TASKS="mingw netbsd openbsd"
This will enable cfbot to turn them on by default when running tests for the
Commitfest app.
Backpatch this back to PG 15, even though PG 15 does not have any manually
triggered task. Keeping the CI infrastructure the same seems advantageous.
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/20240413021221.hg53rvqlvldqh57i%40awork3.anarazel.de
Backpatch-through: 16
Doing that seems rather random and unnecessary. This commit removes
those and fixes fallout, which is pretty minimal. We do need to add a
forward declaration of struct TM_IndexDeleteOp (whose full definition
appears in tableam.h) so that _bt_delitems_delete_check()'s declaration
can use it.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/202508051109.lzk3lcuzsaxo@alvherre.pgsql
Make sure the memory allocated by make_absolute_path() is freed
when SelectConfigFiles() fails. Since all the callers will exit
immediately in that case, there's no practical gain here, but
silencing Valgrind leak complaints seems useful. In any case,
it was inconsistent that only one of the failure exits did this.
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJ7c6TMByXE8dc7zDvDWTQjk6o-XXAdRg_RAg5CBaUOgFPV3LQ%40mail.gmail.com
This function uses an argument named "maxsize" that is only used in
assertions, being set once outside the assertion area. Recent gcc
versions with -Wunused-but-set-parameter complain about a warning when
building without assertions enabled, because of that.
In order to fix this issue, PG_USED_FOR_ASSERTS_ONLY is added to the
function argument of SerializeClientConnectionInfo(), which is the first
time we are doing so in the tree. The CI is fine with the change, but
let's see what the buildfarm has to say on the matter.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Jacob Champion <jchampion@postgresql.org>
Discussion: https://postgr.es/m/pevajesswhxafjkivoq3yvwxga77tbncghlf3gq5fvchsvfuda@6uivg25sb3nx
Backpatch-through: 16
Commit 2633dae2e48 standardized LSN formatting but mistakenly changed
the logical snapshot filename format in SnapBuildSnapshotExists() from
"%X-%X.snap" to "%08X-%08X.snap". Other code still used the original
"%X-%X.snap" format, causing the replication slot synchronization worker
to fail to find existing snapshot files and produce excessive log messages.
This commit restores the original "%X-%X.snap" format
in SnapBuildSnapshotExists() to resolve the issue.
Author: Shveta Malik <shveta.malik@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwHuHPB-ucAk_Tq3uSs4Fdziu1Jp_AA_RD3m5Ycky7m48w@mail.gmail.com
