452 Commits

Author SHA1 Message Date
Alvaro Herrera
0ac5ad5134 Improve concurrency of foreign key locking
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE".  These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE".  UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.

Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.

The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid.  Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates.  This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed.  pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.

Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header.  This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.

Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)

With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.

As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.

Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane.  There's probably room for several more tests.

There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it.  Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.

This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
	AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com
	1290721684-sup-3951@alvh.no-ip.org
	1294953201-sup-2099@alvh.no-ip.org
	1320343602-sup-2290@alvh.no-ip.org
	1339690386-sup-8927@alvh.no-ip.org
	4FE5FF020200002500048A3D@gw.wicourts.gov
	4FEAB90A0200002500048B7D@gw.wicourts.gov
2013-01-23 12:04:59 -03:00
Tom Lane
75b39e7909 Add infrastructure for storing a VARIADIC ANY function's VARIADIC flag.
Originally we didn't bother to mark FuncExprs with any indication whether
VARIADIC had been given in the source text, because there didn't seem to be
any need for it at runtime.  However, because we cannot fold a VARIADIC ANY
function's arguments into an array (since they're not necessarily all the
same type), we do actually need that information at runtime if VARIADIC ANY
functions are to respond unsurprisingly to use of the VARIADIC keyword.
Add the missing field, and also fix ruleutils.c so that VARIADIC ANY
function calls are dumped properly.

Extracted from a larger patch that also fixes concat() and format() (the
only two extant VARIADIC ANY functions) to behave properly when VARIADIC is
specified.  This portion seems appropriate to review and commit separately.

Pavel Stehule
2013-01-21 20:26:15 -05:00
Tom Lane
31f38f28b0 Redesign the planner's handling of index-descent cost estimation.
Historically we've used a couple of very ad-hoc fudge factors to try to
get the right results when indexes of different sizes would satisfy a
query with the same number of index leaf tuples being visited.  In
commit 21a39de5809cd3050a37d2554323cc1d0cbeed9d I tweaked one of these
fudge factors, with results that proved disastrous for larger indexes.
Commit bf01e34b556ff37982ba2d882db424aa484c0d07 fudged it some more,
but still with not a lot of principle behind it.

What seems like a better way to address these issues is to explicitly model
index-descent costs, since that's what's really at stake when considering
diferent indexes with similar leaf-page-level costs.  We tried that once
long ago, and found that charging random_page_cost per page descended
through was way too much, because upper btree levels tend to stay in cache
in real-world workloads.  However, there's still CPU costs to think about,
and the previous fudge factors can be seen as a crude attempt to account
for those costs.  So this patch replaces those fudge factors with explicit
charges for the number of tuple comparisons needed to descend the index
tree, plus a small charge per page touched in the descent.  The cost
multipliers are chosen so that the resulting charges are in the vicinity of
the historical (pre-9.2) fudge factors for indexes of up to about a million
tuples, while not ballooning unreasonably beyond that, as the old fudge
factor did (even more so in 9.2).

To make this work accurately for btree indexes, add some code that allows
extraction of the known root-page height from a btree.  There's no
equivalent number readily available for other index types, but we can use
the log of the number of index pages as an approximate substitute.

This seems like too much of a behavioral change to risk back-patching,
but it should improve matters going forward.  In 9.2 I'll just revert
the fudge-factor change.
2013-01-11 12:56:58 -05:00
Bruce Momjian
bd61a623ac Update copyrights for 2013
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
2013-01-01 17:15:01 -05:00
Tom Lane
72a4231f0c Fix planning of non-strict equivalence clauses above outer joins.
If a potential equivalence clause references a variable from the nullable
side of an outer join, the planner needs to take care that derived clauses
are not pushed to below the outer join; else they may use the wrong value
for the variable.  (The problem arises only with non-strict clauses, since
if an upper clause can be proven strict then the outer join will get
simplified to a plain join.)  The planner attempted to prevent this type
of error by checking that potential equivalence clauses aren't
outerjoin-delayed as a whole, but actually we have to check each side
separately, since the two sides of the clause will get moved around
separately if it's treated as an equivalence.  Bugs of this type can be
demonstrated as far back as 7.4, even though releases before 8.3 had only
a very ad-hoc notion of equivalence clauses.

In addition, we neglected to account for the possibility that such clauses
might have nonempty nullable_relids even when not outerjoin-delayed; so the
equivalence-class machinery lacked logic to compute correct nullable_relids
values for clauses it constructs.  This oversight was harmless before 9.2
because we were only using RestrictInfo.nullable_relids for OR clauses;
but as of 9.2 it could result in pushing constructed equivalence clauses
to incorrect places.  (This accounts for bug #7604 from Bill MacArthur.)

Fix the first problem by adding a new test check_equivalence_delay() in
distribute_qual_to_rels, and fix the second one by adding code in
equivclass.c and called functions to set correct nullable_relids for
generated clauses.  Although I believe the second part of this is not
currently necessary before 9.2, I chose to back-patch it anyway, partly to
keep the logic similar across branches and partly because it seems possible
we might find other reasons why we need valid values of nullable_relids in
the older branches.

Add regression tests illustrating these problems.  In 9.0 and up, also
add test cases checking that we can push constants through outer joins,
since we've broken that optimization before and I nearly broke it again
with an overly simplistic patch for this problem.
2012-10-18 12:30:10 -04:00
Tom Lane
46c508fbcf Fix PARAM_EXEC assignment mechanism to be safe in the presence of WITH.
The planner previously assumed that parameter Vars having the same absolute
query level, varno, and varattno could safely be assigned the same runtime
PARAM_EXEC slot, even though they might be different Vars appearing in
different subqueries.  This was (probably) safe before the introduction of
CTEs, but the lazy-evalution mechanism used for CTEs means that a CTE can
be executed during execution of some other subquery, causing the lifespan
of Params at the same syntactic nesting level as the CTE to overlap with
use of the same slots inside the CTE.  In 9.1 we created additional hazards
by using the same parameter-assignment technology for nestloop inner scan
parameters, but it was broken before that, as illustrated by the added
regression test.

To fix, restructure the planner's management of PlannerParamItems so that
items having different semantic lifespans are kept rigorously separated.
This will probably result in complex queries using more runtime PARAM_EXEC
slots than before, but the slots are cheap enough that this hardly matters.
Also, stop generating PlannerParamItems containing Params for subquery
outputs: all we really need to do is reserve the PARAM_EXEC slot number,
and that now only takes incrementing a counter.  The planning code is
simpler and probably faster than before, as well as being more correct.

Per report from Vik Reykja.

These changes will mostly also need to be made in the back branches, but
I'm going to hold off on that until after 9.2.0 wraps.
2012-09-05 12:55:01 -04:00
Tom Lane
6d2c8c0e2a Drop cheap-startup-cost paths during add_path() if we don't need them.
We can detect whether the planner top level is going to care at all about
cheap startup cost (it will only do so if query_planner's tuple_fraction
argument is greater than zero).  If it isn't, we might as well discard
paths immediately whose only advantage over others is cheap startup cost.
This turns out to get rid of quite a lot of paths in complex queries ---
I saw planner runtime reduction of more than a third on one large query.

Since add_path isn't currently passed the PlannerInfo "root", the easiest
way to tell it whether to do this was to add a bool flag to RelOptInfo.
That's a bit redundant, since all relations in a given query level will
have the same setting.  But in the future it's possible that we'd refine
the control decision to work on a per-relation basis, so this seems like
a good arrangement anyway.

Per my suggestion of a few months ago.
2012-09-01 18:16:24 -04:00
Tom Lane
9ff79b9d4e Fix up planner infrastructure to support LATERAL properly.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries.  Notable changes:

* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.)  Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.

* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization.  We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.

* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.

* Assorted corner-case bug fixes.

There's probably still some bugs left, but this is a lot closer to being
real than it was before.
2012-08-26 22:50:23 -04:00
Tom Lane
5ebaaa4944 Implement SQL-standard LATERAL subqueries.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.

The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned.  The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags.  Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.

In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason.  (It was mainly
add_missing_from that caused so much fudging here in the first place.)

The planner support for this feature is very minimal, and will be improved
in future patches.  It works well enough for testing purposes, though.

catversion bump forced due to new field in RangeTblEntry.
2012-08-07 19:02:54 -04:00
Tom Lane
f6ce81f55a Fix WITH attached to a nested set operation (UNION/INTERSECT/EXCEPT).
Parse analysis neglected to cover the case of a WITH clause attached to an
intermediate-level set operation; it only handled WITH at the top level
or WITH attached to a leaf-level SELECT.  Per report from Adam Mackler.

In HEAD, I rearranged the order of SelectStmt's fields to put withClause
with the other fields that can appear on non-leaf SelectStmts.  In back
branches, leave it alone to avoid a possible ABI break for third-party
code.

Back-patch to 8.4 where WITH support was added.
2012-07-31 17:56:21 -04:00
Tom Lane
c92be3c059 Avoid pre-determining index names during CREATE TABLE LIKE parsing.
Formerly, when trying to copy both indexes and comments, CREATE TABLE LIKE
had to pre-assign names to indexes that had comments, because it made up an
explicit CommentStmt command to apply the comment and so it had to know the
name for the index.  This creates bad interactions with other indexes, as
shown in bug #6734 from Daniele Varrazzo: the preassignment logic couldn't
take any other indexes into account so it could choose a conflicting name.

To fix, add a field to IndexStmt that allows it to carry a comment to be
assigned to the new index.  (This isn't a user-exposed feature of CREATE
INDEX, only an internal option.)  Now we don't need preassignment of index
names in any situation.

I also took the opportunity to refactor DefineIndex to accept the IndexStmt
as such, rather than passing all its fields individually in a mile-long
parameter list.

Back-patch to 9.2, but no further, because it seems too dangerous to change
IndexStmt or DefineIndex's API in released branches.  The bug exists back
to 9.0 where CREATE TABLE LIKE grew the ability to copy comments, but given
the lack of prior complaints we'll just let it go unfixed before 9.2.
2012-07-16 13:25:18 -04:00
Bruce Momjian
927d61eeff Run pgindent on 9.2 source tree in preparation for first 9.3
commit-fest.
2012-06-10 15:20:04 -04:00
Alvaro Herrera
09ff76fcdb Recast "ONLY" column CHECK constraints as NO INHERIT
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE.  It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.

The pg_constraint column has accordingly been renamed connoinherit.

This commit partly reverts some of the changes in
61d81bd28dbec65a6b144e0cd3d0bfe25913c3ac, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.

Author: Nikhil Sontakke
Some tweaks by me
2012-04-20 23:56:57 -03:00
Tom Lane
5b7b5518d0 Revise parameterized-path mechanism to fix assorted issues.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate.  We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.

In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage.  This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.

To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing.  This is required at both base scans and joins.  It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree.  Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
2012-04-19 15:53:47 -04:00
Robert Haas
53bbc681ca Fix various infelicities in node functions.
Mostly, this consists of adding support for fields which exist in the
structure but aren't handled by copy/equal/outfuncs; but the create
foreign table case can actually produce garbage output.

Noah Misch
2012-04-18 10:43:16 -04:00
Tom Lane
a40fa613b5 Add some infrastructure for contrib/pg_stat_statements.
Add a queryId field to Query and PlannedStmt.  This is not used by the
core backend, except for being copied around at appropriate times.
It's meant to allow plug-ins to track a particular query forward from
parse analysis to execution.

The queryId is intentionally not dumped into stored rules (and hence this
commit doesn't bump catversion).  You could argue that choice either way,
but it seems better that stored rule strings not have any dependency
on plug-ins that might or might not be present.

Also, add a post_parse_analyze_hook that gets invoked at the end of
parse analysis (but only for top-level analysis of complete queries,
not cases such as analyzing a domain's default-value expression).
This is mainly meant to be used to compute and assign a queryId,
but it could have other applications.

Peter Geoghegan
2012-03-27 15:17:40 -04:00
Tom Lane
9dbf2b7d75 Restructure SELECT INTO's parsetree representation into CreateTableAsStmt.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements.  The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.

In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs.  Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.

Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.

Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn".  There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.

Andres Freund and Tom Lane
2012-03-19 21:38:12 -04:00
Tom Lane
b14953932d Revise FDW planning API, again.
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path.  Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan.  We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.

Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.

In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution.  We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker).  Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)

Per review of Hanada Shigeru's pgsql_fdw patch.  We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
2012-03-09 12:49:25 -05:00
Tom Lane
6b289942bf Redesign PlanForeignScan API to allow multiple paths for a foreign table.
The original API specification only allowed an FDW to create a single
access path, which doesn't seem like a terribly good idea in hindsight.
Instead, move the responsibility for building the Path node and calling
add_path() into the FDW's PlanForeignScan function.  Now, it can do that
more than once if appropriate.  There is no longer any need for the
transient FdwPlan struct, so get rid of that.

Etsuro Fujita, Shigeru Hanada, Tom Lane
2012-03-05 16:15:59 -05:00
Alvaro Herrera
cb3a7c2b95 ALTER TABLE: skip FK validation when it's safe to do so
We already skip rewriting the table in these cases, but we still force a
whole table scan to validate the data.  This can be skipped, and thus
we can make the whole ALTER TABLE operation just do some catalog touches
instead of scanning the table, when these two conditions hold:

(a) Old and new pg_constraint.conpfeqop match exactly.  This is actually
stronger than needed; we could loosen things by way of operator
families, but it'd require a lot more effort.

(b) The functions, if any, implementing a cast from the foreign type to
the primary opcintype are the same.  For this purpose, we can consider a
binary coercion equivalent to an exact type match.  When the opcintype
is polymorphic, require that the old and new foreign types match
exactly.  (Since ri_triggers.c does use the executor, the stronger check
for polymorphic types is no mere future-proofing.  However, no core type
exercises its necessity.)

Author: Noah Misch

Committer's note: catalog version bumped due to change of the Constraint
node.  I can't actually find any way to have such a node in a stored
rule, but given that we have "out" support for them, better be safe.
2012-02-27 19:10:24 -03:00
Tom Lane
e2fa76d80b Use parameterized paths to generate inner indexscans more flexibly.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready.  This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.

There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered.  However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.

Note API change for index AM amcostestimate functions.  I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
2012-01-27 19:26:38 -05:00
Peter Eisentraut
db49517c62 Rename the internal structures of the CREATE TABLE (LIKE ...) facility
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly.  This turned out to be very confusing, because it has
nothing to do with the INHERITS feature.  So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
2012-01-07 23:02:33 +02:00
Bruce Momjian
e126958c2e Update copyright notices for year 2012. 2012-01-01 18:01:58 -05:00
Tom Lane
472d3935a2 Rethink representation of index clauses' mapping to index columns.
In commit e2c2c2e8b1df7dfdb01e7e6f6191a569ce3c3195 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love.  Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns.  Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers.  The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.

The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option).  Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
2011-12-24 19:03:21 -05:00
Robert Haas
0e4611c023 Add a security_barrier option for views.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view.  Views not configured with this
option cannot provide robust row-level security, but will perform far
better.

Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!).  Review (in earlier versions) by Noah Misch and
others.  Design advice by Tom Lane and myself.  Further review and
cleanup by me.
2011-12-22 16:16:31 -05:00
Peter Eisentraut
d5f23af6bf Add const qualifiers to node inspection functions
Thomas Munro
2011-12-07 21:46:56 +02:00
Tom Lane
9ed439a9c0 Fix unsupported options in CREATE TABLE ... AS EXECUTE.
The WITH [NO] DATA option was not supported, nor the ability to specify
replacement column names; the former limitation wasn't even documented, as
per recent complaint from Naoya Anzai.  Fix by moving the responsibility
for supporting these options into the executor.  It actually takes less
code this way ...

catversion bump due to change in representation of IntoClause, which might
affect stored rules.
2011-11-24 23:21:45 -05:00
Tom Lane
0f39d5050d Don't trust deferred-unique indexes for join removal.
The uniqueness condition might fail to hold intra-transaction, and assuming
it does can give incorrect query results.  Per report from Marti Raudsepp,
though this is not his proposed patch.

Back-patch to 9.0, where both these features were introduced.  In the
released branches, add the new IndexOptInfo field to the end of the struct,
to try to minimize ABI breakage for third-party code that may be examining
that struct.
2011-10-23 00:43:39 -04:00
Tom Lane
e6858e6657 Measure the number of all-visible pages for use in index-only scan costing.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.

This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.

Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan.  Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
2011-10-14 17:23:46 -04:00
Tom Lane
a0185461dd Rearrange the implementation of index-only scans.
This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple.  The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes.  The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.

To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns.  I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion.  (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.)  This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.

Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
2011-10-11 14:21:30 -04:00
Tom Lane
a2822fb933 Support index-only scans using the visibility map to avoid heap fetches.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page.  This patch depends
on the previous patches that made the visibility map reliable.

There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.

Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
2011-10-07 20:14:13 -04:00
Tom Lane
698df3350d Can't print PlannerGlobal's subroots list in outfuncs.
Since the subroots will surely link back to the same glob struct, this
necessarily leads to infinite recursion.  Doh.  Found while trying to
debug some other code.
2011-09-04 14:43:52 -04:00
Tom Lane
b3aaf9081a Rearrange planner to save the whole PlannerInfo (subroot) for a subquery.
Formerly, set_subquery_pathlist and other creators of plans for subqueries
saved only the rangetable and rowMarks lists from the lower-level
PlannerInfo.  But there's no reason not to remember the whole PlannerInfo,
and indeed this turns out to simplify matters in a number of places.

The immediate reason for doing this was so that the subroot will still be
accessible when we're trying to extract column statistics out of an
already-planned subquery.  But now that I've done it, it seems like a good
code-beautification effort in its own right.

I also chose to get rid of the transient subrtable and subrowmark fields in
SubqueryScan nodes, in favor of having setrefs.c look up the subquery's
RelOptInfo.  That required changing all the APIs in setrefs.c to pass
PlannerInfo not PlannerGlobal, which was a large but quite mechanical
transformation.

One side-effect not foreseen at the beginning is that this finally broke
inheritance_planner's assumption that replanning the same subquery RTE N
times would necessarily give interchangeable results each time.  That
assumption was always pretty risky, but now we really have to make a
separate RTE for each instance so that there's a place to carry the
separate subroots.
2011-09-03 15:36:24 -04:00
Bruce Momjian
6416a82a62 Remove unnecessary #include references, per pgrminclude script. 2011-09-01 10:04:27 -04:00
Tom Lane
b5282aa893 Revise sinval code to remove no-longer-used tuple TID from inval messages.
This requires adjusting the API for syscache callback functions: they now
get a hash value, not a TID, to identify the target tuple.  Most of them
weren't paying any attention to that argument anyway, but plancache did
require a small amount of fixing.

Also, improve performance a trifle by avoiding sending duplicate inval
messages when a heap_update isn't changing the catcache lookup columns.
2011-08-16 19:27:46 -04:00
Robert Haas
c4096c7639 Allow per-column foreign data wrapper options.
Shigeru Hanada, with fairly minor editing by me.
2011-08-05 13:24:03 -04:00
Robert Haas
367bc426a1 Avoid index rebuild for no-rewrite ALTER TABLE .. ALTER TYPE.
Noah Misch.  Review and minor cosmetic changes by me.
2011-07-18 11:04:43 -04:00
Tom Lane
918854cc08 Fix handling of collations in multi-row VALUES constructs.
Per spec we ought to apply select_common_collation() across the expressions
in each column of the VALUES table.  The original coding was just taking
the first row and assuming it was representative.

This patch adds a field to struct RangeTblEntry to carry the resolved
collations, so initdb is forced for changes in stored rule representation.
2011-04-18 15:31:52 -04:00
Simon Riggs
ec497a5ad6 Make FKs valid at creation when added as column constraints.
Bug report from Alvaro Herrera
2011-03-22 23:10:35 +00:00
Tom Lane
8df08c8489 Reimplement planner's handling of MIN/MAX aggregate optimization (again).
Instead of playing cute games with pathkeys, just build a direct
representation of the intended sub-select, and feed it through
query_planner to get a Path for the index access.  This is a bit slower
than 9.1's previous method, since we'll duplicate most of the overhead of
query_planner; but since the whole optimization only applies to rather
simple single-table queries, that probably won't be much of a problem in
practice.  The advantage is that we get to do the right thing when there's
a partial index that needs the implicit IS NOT NULL clause to be usable.
Also, although this makes planagg.c be a bit more closely tied to the
ordering of operations in grouping_planner, we can get rid of some coupling
to lower-level parts of the planner.  Per complaint from Marti Raudsepp.
2011-03-22 00:34:31 -04:00
Tom Lane
b310b6e31c Revise collation derivation method and expression-tree representation.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record).  Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.

Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree.  This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.

Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
2011-03-19 20:30:08 -04:00
Tom Lane
8acdb8bf9c Split CollateClause into separate raw and analyzed node types.
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis.  This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.

Also, clean up assorted infelicities and omissions in processing of the
node type.
2011-03-11 16:28:18 -05:00
Tom Lane
a051ef699c Remove collation information from TypeName, where it does not belong.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee.  It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".

To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API.  I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes.  This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.

Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.

While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.

BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
2011-03-09 22:39:20 -05:00
Tom Lane
389af95155 Support data-modifying commands (INSERT/UPDATE/DELETE) in WITH.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order.  Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values.  And attempts to do conflicting updates will
have unpredictable results.  We'll need to document all that.

This commit just fixes the code; documentation updates are waiting on
author.

Marko Tiikkaja and Hitoshi Harada
2011-02-25 18:58:02 -05:00
Tom Lane
bdca82f44d Add a relkind field to RangeTblEntry to avoid some syscache lookups.
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain.  While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry.  That might have some other uses later, anyway.
Per discussion.
2011-02-22 19:24:40 -05:00
Tom Lane
bb74240794 Implement an API to let foreign-data wrappers actually be functional.
This commit provides the core code and documentation needed.  A contrib
module test case will follow shortly.

Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
2011-02-20 00:18:14 -05:00
Tom Lane
a2095f7fb5 Fix bogus test for hypothetical indexes in get_actual_variable_range().
That function was supposing that indexoid == 0 for a hypothetical index,
but that is not likely to be true in any non-toy implementation of an index
adviser, since assigning a fake OID is the only way to know at EXPLAIN time
which hypothetical index got selected.  Fix by adding a flag to
IndexOptInfo to mark hypothetical indexes.  Back-patch to 9.0 where
get_actual_variable_range() was added.

Gurjeet Singh
2011-02-16 19:24:45 -05:00
Tom Lane
e617f0d7e4 Fix improper matching of resjunk column names for FOR UPDATE in subselect.
Flattening of subquery range tables during setrefs.c could lead to the
rangetable indexes in PlanRowMark nodes not matching up with the column
names previously assigned to the corresponding resjunk ctid (resp. tableoid
or wholerow) columns.  Typical symptom would be either a "cannot extract
system attribute from virtual tuple" error or an Assert failure.  This
wasn't a problem before 9.0 because we didn't support FOR UPDATE below the
top query level, and so the final flattening could never renumber an RTE
that was relevant to FOR UPDATE.  Fix by using a plan-tree-wide unique
number for each PlanRowMark to label the associated resjunk columns, so
that the number need not change during flattening.

Per report from David Johnston (though I'm darned if I can see how this got
past initial testing of the relevant code).  Back-patch to 9.0.
2011-02-09 23:27:42 -05:00
Peter Eisentraut
414c5a2ea6 Per-column collation support
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.

Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
2011-02-08 23:04:18 +02:00
Tom Lane
88452d5ba6 Implement ALTER TABLE ADD UNIQUE/PRIMARY KEY USING INDEX.
This feature allows a unique or pkey constraint to be created using an
already-existing unique index.  While the constraint isn't very
functionally different from the bare index, it's nice to be able to do that
for documentation purposes.  The main advantage over just issuing a plain
ALTER TABLE ADD UNIQUE/PRIMARY KEY is that the index can be created with
CREATE INDEX CONCURRENTLY, so that there is not a long interval where the
table is locked against updates.

On the way, refactor some of the code in DefineIndex() and index_create()
so that we don't have to pass through those functions in order to create
the index constraint's catalog entries.  Also, in parse_utilcmd.c, pass
around the ParseState pointer in struct CreateStmtContext to save on
notation, and add error location pointers to some error reports that didn't
have one before.

Gurjeet Singh, reviewed by Steve Singer and Tom Lane
2011-01-25 15:43:05 -05:00